event
¶
The event commands module.
These commands are used in the following models: AWG5K, AWG5KC, AWG7K, AWG7KC
THIS FILE IS AUTO-GENERATED, IT SHOULD NOT BE MANUALLY MODIFIED.
Please report an issue if one is found.
Commands and Queries
- EVENt:IMMediate
- EVENt:IMPedance <ohms>
- EVENt:IMPedance?
- EVENt:JTIMing <jump_type>
- EVENt:JTIMing?
- EVENt:LEVel <level>
- EVENt:LEVel?
- EVENt:POLarity {POSitive|NEGative}
- EVENt:POLarity?
Event
¶
Bases: SCPICmdRead
The EVENt
command tree.
Usage
- Using the
.query()
method will send theEVENt?
query. - Using the
.verify(value)
method will send theEVENt?
query and raise an AssertionError if the returned value does not matchvalue
.
Properties
.impedance
: TheEVENt:IMPedance
command..jtiming
: TheEVENt:JTIMing
command..level
: TheEVENt:LEVel
command..polarity
: TheEVENt:POLarity
command..immediate
: TheEVENt:IMMediate
command.
immediate
property
¶
immediate: EventImmediate
Return the EVENt:IMMediate
command.
Description
- This command generates a forced event. This is used to generate the event when the
sequence is waiting for an event jump (See
SEQUENCE:ELEMENTN:JTARGET:TYPE
). This is equivalent to pressing the Force Event button on the front panel of the instrument.
Usage
- Using the
.write()
method will send theEVENt:IMMediate
command.
SCPI Syntax
- EVENt:IMMediate
impedance
property
¶
impedance: EventImpedance
Return the EVENt:IMPedance
command.
Description
- This command and query sets or returns the impedance of the external event input. Valid values are 50 ohm or 1 kohm.
Usage
- Using the
.query()
method will send theEVENt:IMPedance?
query. - Using the
.verify(value)
method will send theEVENt:IMPedance?
query and raise an AssertionError if the returned value does not matchvalue
. - Using the
.write(value)
method will send theEVENt:IMPedance value
command.
SCPI Syntax
- EVENt:IMPedance <ohms>
- EVENt:IMPedance?
Info
<ohms>
::=.
jtiming
property
¶
jtiming: EventJtiming
Return the EVENt:JTIMing
command.
Description
- This command and query sets or returns the jump timing. Refer to the User Online Help for more information on jump timing.
Usage
- Using the
.query()
method will send theEVENt:JTIMing?
query. - Using the
.verify(value)
method will send theEVENt:JTIMing?
query and raise an AssertionError if the returned value does not matchvalue
. - Using the
.write(value)
method will send theEVENt:JTIMing value
command.
SCPI Syntax
- EVENt:JTIMing <jump_type>
- EVENt:JTIMing?
Info
<jump_type>
::={SYNChronous|ASYNchronous}.SYNChronous
indicates jump occurs immediately.ASYNchronous
indicates jump occurs after the signal generation is finished.
level
property
¶
level: EventLevel
Return the EVENt:LEVel
command.
Description
- This command and query sets or returns the event level.
Usage
- Using the
.query()
method will send theEVENt:LEVel?
query. - Using the
.verify(value)
method will send theEVENt:LEVel?
query and raise an AssertionError if the returned value does not matchvalue
. - Using the
.write(value)
method will send theEVENt:LEVel value
command.
SCPI Syntax
- EVENt:LEVel <level>
- EVENt:LEVel?
Info
<level>
::=.
polarity
property
¶
polarity: EventPolarity
Return the EVENt:POLarity
command.
Description
- This command and query sets or returns the polarity of event signal. The Event Jump is the function to change the sequencing of the waveform by an event signal.
Usage
- Using the
.query()
method will send theEVENt:POLarity?
query. - Using the
.verify(value)
method will send theEVENt:POLarity?
query and raise an AssertionError if the returned value does not matchvalue
. - Using the
.write(value)
method will send theEVENt:POLarity value
command.
SCPI Syntax
- EVENt:POLarity {POSitive|NEGative}
- EVENt:POLarity?
Info
POSitive
indicates that event jump occurs when the instrument receives a positive pulse.NEGative
indicates that event jump occurs when the instrument receives a negative pulse.
EventImmediate
¶
Bases: SCPICmdWriteNoArguments
The EVENt:IMMediate
command.
Description
- This command generates a forced event. This is used to generate the event when the
sequence is waiting for an event jump (See
SEQUENCE:ELEMENTN:JTARGET:TYPE
). This is equivalent to pressing the Force Event button on the front panel of the instrument.
Usage
- Using the
.write()
method will send theEVENt:IMMediate
command.
SCPI Syntax
- EVENt:IMMediate
EventImpedance
¶
Bases: SCPICmdWrite
, SCPICmdRead
The EVENt:IMPedance
command.
Description
- This command and query sets or returns the impedance of the external event input. Valid values are 50 ohm or 1 kohm.
Usage
- Using the
.query()
method will send theEVENt:IMPedance?
query. - Using the
.verify(value)
method will send theEVENt:IMPedance?
query and raise an AssertionError if the returned value does not matchvalue
. - Using the
.write(value)
method will send theEVENt:IMPedance value
command.
SCPI Syntax
- EVENt:IMPedance <ohms>
- EVENt:IMPedance?
Info
<ohms>
::=.
EventJtiming
¶
Bases: SCPICmdWrite
, SCPICmdRead
The EVENt:JTIMing
command.
Description
- This command and query sets or returns the jump timing. Refer to the User Online Help for more information on jump timing.
Usage
- Using the
.query()
method will send theEVENt:JTIMing?
query. - Using the
.verify(value)
method will send theEVENt:JTIMing?
query and raise an AssertionError if the returned value does not matchvalue
. - Using the
.write(value)
method will send theEVENt:JTIMing value
command.
SCPI Syntax
- EVENt:JTIMing <jump_type>
- EVENt:JTIMing?
Info
<jump_type>
::={SYNChronous|ASYNchronous}.SYNChronous
indicates jump occurs immediately.ASYNchronous
indicates jump occurs after the signal generation is finished.
EventLevel
¶
Bases: SCPICmdWrite
, SCPICmdRead
The EVENt:LEVel
command.
Description
- This command and query sets or returns the event level.
Usage
- Using the
.query()
method will send theEVENt:LEVel?
query. - Using the
.verify(value)
method will send theEVENt:LEVel?
query and raise an AssertionError if the returned value does not matchvalue
. - Using the
.write(value)
method will send theEVENt:LEVel value
command.
SCPI Syntax
- EVENt:LEVel <level>
- EVENt:LEVel?
Info
<level>
::=.
EventPolarity
¶
Bases: SCPICmdWrite
, SCPICmdRead
The EVENt:POLarity
command.
Description
- This command and query sets or returns the polarity of event signal. The Event Jump is the function to change the sequencing of the waveform by an event signal.
Usage
- Using the
.query()
method will send theEVENt:POLarity?
query. - Using the
.verify(value)
method will send theEVENt:POLarity?
query and raise an AssertionError if the returned value does not matchvalue
. - Using the
.write(value)
method will send theEVENt:POLarity value
command.
SCPI Syntax
- EVENt:POLarity {POSitive|NEGative}
- EVENt:POLarity?
Info
POSitive
indicates that event jump occurs when the instrument receives a positive pulse.NEGative
indicates that event jump occurs when the instrument receives a negative pulse.