touchscreen
¶
The touchscreen commands module.
These commands are used in the following models: LPD6, MSO4, MSO4B, MSO5, MSO5B, MSO5LP, MSO6, MSO6B
THIS FILE IS AUTO-GENERATED, IT SHOULD NOT BE MANUALLY MODIFIED.
Please report an issue if one is found.
Commands and Queries
- TOUCHSCReen:CALibrate STARt
- TOUCHSCReen:STATe {0|1|OFF|ON}
- TOUCHSCReen:STATe?
Touchscreen
¶
Bases: SCPICmdRead
The TOUCHSCReen
command tree.
Usage
- Using the
.query()
method will send theTOUCHSCReen?
query. - Using the
.verify(value)
method will send theTOUCHSCReen?
query and raise an AssertionError if the returned value does not matchvalue
.
Properties
.calibrate
: TheTOUCHSCReen:CALibrate
command..state
: TheTOUCHSCReen:STATe
command.
calibrate
property
¶
calibrate: TouchscreenCalibrate
Return the TOUCHSCReen:CALibrate
command.
Description
- This command launches the touch screen calibration procedure. This command is equivalent to tapping the Calibrate touch screen control in the Utility->Self Test menu.
Usage
- Using the
.write(value)
method will send theTOUCHSCReen:CALibrate value
command.
SCPI Syntax
- TOUCHSCReen:CALibrate STARt
Info
STARt
launches the touch screen calibration procedure.
state
property
¶
state: TouchscreenState
Return the TOUCHSCReen:STATe
command.
Description
- This sets or queries the enabled state of the touch screen only. This command is equivalent to pushing the Touch Off button on the front panel. To completely disable front panel operation, use the command LOCK ALL. To re-enable the front panel, send the command LOCK NONE.
Usage
- Using the
.query()
method will send theTOUCHSCReen:STATe?
query. - Using the
.verify(value)
method will send theTOUCHSCReen:STATe?
query and raise an AssertionError if the returned value does not matchvalue
. - Using the
.write(value)
method will send theTOUCHSCReen:STATe value
command.
SCPI Syntax
- TOUCHSCReen:STATe {0|1|OFF|ON}
- TOUCHSCReen:STATe?
Info
0
disables the touch screen.ON
enables the touch screen.OFF
disables the touch screen.
TouchscreenCalibrate
¶
Bases: SCPICmdWrite
The TOUCHSCReen:CALibrate
command.
Description
- This command launches the touch screen calibration procedure. This command is equivalent to tapping the Calibrate touch screen control in the Utility->Self Test menu.
Usage
- Using the
.write(value)
method will send theTOUCHSCReen:CALibrate value
command.
SCPI Syntax
- TOUCHSCReen:CALibrate STARt
Info
STARt
launches the touch screen calibration procedure.
TouchscreenState
¶
Bases: SCPICmdWrite
, SCPICmdRead
The TOUCHSCReen:STATe
command.
Description
- This sets or queries the enabled state of the touch screen only. This command is equivalent to pushing the Touch Off button on the front panel. To completely disable front panel operation, use the command LOCK ALL. To re-enable the front panel, send the command LOCK NONE.
Usage
- Using the
.query()
method will send theTOUCHSCReen:STATe?
query. - Using the
.verify(value)
method will send theTOUCHSCReen:STATe?
query and raise an AssertionError if the returned value does not matchvalue
. - Using the
.write(value)
method will send theTOUCHSCReen:STATe value
command.
SCPI Syntax
- TOUCHSCReen:STATe {0|1|OFF|ON}
- TOUCHSCReen:STATe?
Info
0
disables the touch screen.ON
enables the touch screen.OFF
disables the touch screen.