[python source code]

awg70ka_commands

The AWG70KA commands module.

THIS FILE IS AUTO-GENERATED, IT SHOULD NOT BE MANUALLY MODIFIED.

Please report an issue if one is found.

AWG70KACommandConstants

The AWG70KA command argument constants.

This provides access to all the string constants which can be used as arguments for AWG70KA commands.

AWG70KACommands

The AWG70KA commands.

This provides access to all the commands for the AWG70KA device. See the documentation of each property for more usage information.

Properties
  • .active: The ACTive command tree.
  • .auxoutput: The AUXoutput[n] command tree.
  • .awgcontrol: The AWGControl command tree.
  • .bwaveform: The BWAVeform command tree.
  • .cal: The *CAL command.
  • .calibration: The CALibration command tree.
  • .clock: The CLOCk command tree.
  • .cls: The *CLS command.
  • .connectivity: The CONNectivity command tree.
  • .cplayback: The CPLayback command tree.
  • .diagnostic: The DIAGnostic command tree.
  • .display: The DISPlay command tree.
  • .ese: The *ESE command.
  • .esr: The *ESR command.
  • .fgen: The FGEN command tree.
  • .idn: The *IDN command.
  • .instrument: The INSTrument command tree.
  • .mmemory: The MMEMory command tree.
  • .opc: The *OPC command.
  • .opt: The *OPT command.
  • .output: The OUTPut command tree.
  • .outputx: The OUTPut[n] command tree.
  • .rst: The *RST command.
  • .slist: The SLISt command tree.
  • .source: The SOURce command tree.
  • .sourcex: The SOURce[n] command tree.
  • .sre: The *SRE command.
  • .status: The STATus command tree.
  • .stb: The *STB command.
  • .synchronize: The SYNChronize command tree.
  • .system: The SYSTem command tree.
  • .trg: The *TRG command.
  • .trigger: The TRIGger command tree.
  • .tst: The *TST command.
  • .wai: The *WAI command.
  • .wlist: The WLISt command tree.
  • .wplugin: The WPLugin command tree.

active property 

active: Active

Return the ACTive command tree.

Usage
  • Using the .query() method will send the ACTive? query.
  • Using the .verify(value) method will send the ACTive? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .mode: The ACTive:MODE command.

auxoutput property 

auxoutput: dict[int, AuxoutputItem]

Return the AUXoutput[n] command tree.

Usage
  • Using the .query() method will send the AUXoutput[n]? query.
  • Using the .verify(value) method will send the AUXoutput[n]? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .source: The AUXoutput[n]:SOURce command.

awgcontrol property 

awgcontrol: Awgcontrol

Return the AWGControl command tree.

Usage
  • Using the .query() method will send the AWGControl? query.
  • Using the .verify(value) method will send the AWGControl? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .arsettings: The AWGControl:ARSettings command.
  • .clock: The AWGControl:CLOCk command tree.
  • .compile: The AWGControl:COMPile command.
  • .configure: The AWGControl:CONFigure command tree.
  • .dloading: The AWGControl:DLOading command tree.
  • .doutput: The AWGControl:DOUTput[n] command tree.
  • .interleave: The AWGControl:INTerleave command tree.
  • .lstate: The AWGControl:LSTate command.
  • .pjump: The AWGControl:PJUMp command tree.
  • .rmode: The AWGControl:RMODe command.
  • .rstate: The AWGControl:RSTate command.
  • .run: The AWGControl:RUN command tree.
  • .sname: The AWGControl:SNAMe command.
  • .srestore: The AWGControl:SREStore command.
  • .ssave: The AWGControl:SSAVe command.
  • .stop: The AWGControl:STOP command tree.
  • .streaming: The AWGControl:STReaming command tree.
  • .timer: The AWGControl:TIMer command tree.

bwaveform property 

bwaveform: Bwaveform

Return the BWAVeform command tree.

Usage
  • Using the .query() method will send the BWAVeform? query.
  • Using the .verify(value) method will send the BWAVeform? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .amplitude: The BWAVeform:AMPLitude command.
  • .auto: The BWAVeform:AUTO command.
  • .compile: The BWAVeform:COMPile command.
  • .cycle: The BWAVeform:CYCLe command.
  • .fdrange: The BWAVeform:FDRange command.
  • .frequency: The BWAVeform:FREQuency command.
  • .function: The BWAVeform:FUNCtion command.
  • .high: The BWAVeform:HIGH command.
  • .length: The BWAVeform:LENGth command.
  • .low: The BWAVeform:LOW command.
  • .offset: The BWAVeform:OFFSet command.
  • .reset: The BWAVeform:RESet command.
  • .srate: The BWAVeform:SRATe command.

cal property 

cal: Cal

Return the *CAL command.

Description
  • This query-only command starts signal path calibration (SPC) and returns the status upon completion.
Usage
  • Using the .query() method will send the *CAL? query.
  • Using the .verify(value) method will send the *CAL? query and raise an AssertionError if the returned value does not match value.
SCPI Syntax 
- *CAL?

calibration property 

calibration: Calibration

Return the CALibration command tree.

Usage
  • Using the .query() method will send the CALibration? query.
  • Using the .verify(value) method will send the CALibration? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .abort: The CALibration:ABORt command.
  • .catalog: The CALibration:CATalog command.
  • .log: The CALibration:LOG command.
  • .restore: The CALibration:RESTore command.
  • .result: The CALibration:RESult command.
  • .running: The CALibration:RUNNing command.
  • .start: The CALibration:STARt command.
  • .state: The CALibration:STATe command tree.
  • .stop: The CALibration:STOP command tree.
  • .all: The CALibration:ALL command.

clock property 

clock: Clock

Return the CLOCk command tree.

Usage
  • Using the .query() method will send the CLOCk? query.
  • Using the .verify(value) method will send the CLOCk? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .eclock: The CLOCk:ECLock command tree.
  • .ereference: The CLOCk:EREFerence command tree.
  • .jitter: The CLOCk:JITTer command.
  • .output: The CLOCk:OUTPut command tree.
  • .phase: The CLOCk:PHASe command tree.
  • .source: The CLOCk:SOURce command.
  • .sout: The CLOCk:SOUT command tree.
  • .srate: The CLOCk:SRATe command.

cls property 

cls: Cls

Return the *CLS command.

Description
  • This command (no query form) clears the following: Event Queue Standard Event Status Register Status Byte Register (except the MAV bit) If the *CLS command immediately follows an , the Output Queue and MAV bit (Status Byte Register bit 4) are also cleared. MAV indicates that information is in the output queue. The device clear (DCL) control message will clear the output queue and thus MAV. *CLS does not clear the output queue or MAV. *CLS can suppress a Service Request that is to be generated by an *OPC. This will happen if a single sequence acquisition operation is still being processed when the *CLS command is executed.
Usage
  • Using the .write() method will send the *CLS command.
SCPI Syntax 
- *CLS

connectivity property 

connectivity: Connectivity

Return the CONNectivity command tree.

Usage
  • Using the .query() method will send the CONNectivity? query.
  • Using the .verify(value) method will send the CONNectivity? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .active: The CONNectivity:ACTive command.
  • .connect: The CONNectivity:CONNect command.
  • .disconnect: The CONNectivity:DISConnect command.
  • .gang: The CONNectivity:GANG command tree.
  • .remove: The CONNectivity:REMove command.
  • .status: The CONNectivity:STATus command.

cplayback property 

cplayback: Cplayback

Return the CPLayback command tree.

Usage
  • Using the .query() method will send the CPLayback? query.
  • Using the .verify(value) method will send the CPLayback? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .capture: The CPLayback:CAPTure command tree.
  • .clist: The CPLayback:CLISt command tree.
  • .compile: The CPLayback:COMPile command.

diagnostic property 

diagnostic: Diagnostic

Return the DIAGnostic command tree.

Usage
  • Using the .query() method will send the DIAGnostic? query.
  • Using the .verify(value) method will send the DIAGnostic? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .abort: The DIAGnostic:ABORt command.
  • .catalog: The DIAGnostic:CATalog command.
  • .control: The DIAGnostic:CONTrol command tree.
  • .data: The DIAGnostic:DATA command.
  • .log: The DIAGnostic:LOG command.
  • .loops: The DIAGnostic:LOOPs command.
  • .result: The DIAGnostic:RESult command.
  • .running: The DIAGnostic:RUNNing command.
  • .select: The DIAGnostic:SELect command.
  • .start: The DIAGnostic:STARt command.
  • .stop: The DIAGnostic:STOP command.
  • .type: The DIAGnostic:TYPE command.
  • .unselect: The DIAGnostic:UNSelect command.
  • .immediate: The DIAGnostic:IMMediate command.

display property 

display: Display

Return the DISPlay command tree.

Usage
  • Using the .query() method will send the DISPlay? query.
  • Using the .verify(value) method will send the DISPlay? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .plot: The DISPlay:PLOT command tree.

ese property 

ese: Ese

Return the *ESE command.

Description
  • This command sets and queries the bits in the Event Status Enable Register (ESER). The ESER prevents events from being reported to the Status Byte Register (STB). For a more detailed discussion of the use of these registers, see Registers.
Usage
  • Using the .query() method will send the *ESE? query.
  • Using the .verify(value) method will send the *ESE? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the *ESE value command.
SCPI Syntax 
- *ESE <NR1>
- *ESE?
Info
  • <NR1> specifies the binary bits of the ESER according to this value, which ranges from 0 through 255.

esr property 

esr: Esr

Return the *ESR command.

Description
  • This query-only command returns the contents of the Standard Event Status Register (SESR). *ESR? also clears the SESR (since reading the SESR clears it). For a more detailed discussion of the use of these registers, see Registers.
Usage
  • Using the .query() method will send the *ESR? query.
  • Using the .verify(value) method will send the *ESR? query and raise an AssertionError if the returned value does not match value.
SCPI Syntax 
- *ESR?

fgen property 

fgen: Fgen

Return the FGEN command tree.

Usage
  • Using the .query() method will send the FGEN? query.
  • Using the .verify(value) method will send the FGEN? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .channel: The FGEN:CHANnel[n] command tree.

idn property 

idn: Idn

Return the *IDN command.

Description
  • This query-only command returns the instrument identification code.
Usage
  • Using the .query() method will send the *IDN? query.
  • Using the .verify(value) method will send the *IDN? query and raise an AssertionError if the returned value does not match value.
SCPI Syntax 
- *IDN?

instrument property 

instrument: Instrument

Return the INSTrument command tree.

Usage
  • Using the .query() method will send the INSTrument? query.
  • Using the .verify(value) method will send the INSTrument? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .couple: The INSTrument:COUPle command tree.
  • .mode: The INSTrument:MODE command.

mmemory property 

mmemory: Mmemory

Return the MMEMory command tree.

Usage
  • Using the .query() method will send the MMEMory? query.
  • Using the .verify(value) method will send the MMEMory? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .catalog: The MMEMory:CATalog command.
  • .cdirectory: The MMEMory:CDIRectory command.
  • .data: The MMEMory:DATA command.
  • .delete: The MMEMory:DELete command.
  • .import: The MMEMory:IMPort command.
  • .mdirectory: The MMEMory:MDIRectory command.
  • .msis: The MMEMory:MSIS command.
  • .open: The MMEMory:OPEN command.
  • .save: The MMEMory:SAVE command tree.

opc property 

opc: Opc

Return the *OPC command.

Description
  • This command generates the operation complete message in the Standard Event Status Register (SESR) when all pending commands that generate an OPC message are complete. The *OPC? query places the ASCII character ‘1’ into the output queue when all such OPC commands are complete. The *OPC? response is not available to read until all pending operations finish. For a complete discussion of the use of these registers and the output queue, see Registers and Queues. The *OPC command allows you to synchronize the operation of the instrument with your application program. For more information, see Synchronization Methods. Refer to the Oscilloscope operations that can generate OPC table for a list of commands that generate an OPC message.
Usage
  • Using the .query() method will send the *OPC? query.
  • Using the .verify(value) method will send the *OPC? query and raise an AssertionError if the returned value does not match value.
  • Using the .write() method will send the *OPC command.
SCPI Syntax 
- *OPC
- *OPC?

opt property 

opt: Opt

Return the *OPT command.

Description
  • This query-only command returns a comma separated list of installed options as an arbitrary ASCII string (no quotes) of the form: <optionCode>:<optionDescription>,<optionCode>:<optionDescription>… The last section of each entry (the text following the last hyphen) indicates the license type. If no options are found, NONE is returned.
Usage
  • Using the .query() method will send the *OPT? query.
  • Using the .verify(value) method will send the *OPT? query and raise an AssertionError if the returned value does not match value.
SCPI Syntax 
- *OPT?

output property 

output: Output

Return the OUTPut command tree.

Usage
  • Using the .query() method will send the OUTPut? query.
  • Using the .verify(value) method will send the OUTPut? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .off: The OUTPut:OFF command.

outputx property 

outputx: dict[int, OutputItem]

Return the OUTPut[n] command tree.

Usage
  • Using the .query() method will send the OUTPut[n]? query.
  • Using the .verify(value) method will send the OUTPut[n]? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .attenuator: The OUTPut[n]:ATTenuator command tree.
  • .filter: The OUTPut[n]:FILTer command.
  • .path: The OUTPut[n]:PATH command.
  • .svalue: The OUTPut[n]:SVALue command tree.
  • .wvalue: The OUTPut[n]:WVALue command tree.
  • .state: The OUTPut[n]:STATe command.

rst property 

rst: Rst

Return the *RST command.

Description
  • This command (no query form) resets the instrument to the factory default settings. This command does the following: Recalls the default instrument setup. Clears the current *DDT command. Disables aliases (:ALIAS:STATE 0). Disables the user password (for the *PUD command). The *RST command does not change the following: The current working directory ( :FILESystem:CWD command). The state of command headers ( :HEADer command). The state of keyword and enumeration verbosity ( :VERBose command). The Power-on Status Clear Flag ( *PSC command). The Event Status Enable Register ( *ESE command). The Service Request Enable Register ( *SRE command). The Device Event Status Enable Register ( DESE command). The user password for protected user data ( :PASSWord command). The content of protected user data ( *PUD command). The enabled state of the socket server ( :SOCKETServer:ENAble command). The socket server port number ( :SOCKETServer:PORT command). The socket server protocol ( :SOCKETServer:PROTOCol command). The USBTMC port configuration ( :USBDevice:CONFigure command). The destination reference waveform or file path for the :CURVe command ( :DATa:DESTination command). The source waveform for the :CURVe? or :WAVFrm? queries ( :DATa:SOUrce command). The waveform data encoding for the :CURVe command or query or the :WAVFrm? query ( :DATa:ENCdg command). The starting point for :CURVe? queries ( :DATa:STARt command). The ending point for :CURVe? queries ( :DATa:STOP command). All settings associated the :WFMInpre commands. All user settable settings associated with the WFMOutpre commands. *RST only resets the programmable interface settings, it does not change the user interface settings.
Usage
  • Using the .write() method will send the *RST command.
SCPI Syntax 
- *RST

slist property 

slist: Slist

Return the SLISt command tree.

Usage
  • Using the .query() method will send the SLISt? query.
  • Using the .verify(value) method will send the SLISt? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .name: The SLISt:NAME command.
  • .sequence: The SLISt:SEQuence command tree.
  • .size: The SLISt:SIZE command.

source property 

source: Source

Return the SOURce command tree.

Usage
  • Using the .query() method will send the SOURce? query.
  • Using the .verify(value) method will send the SOURce? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .frequency: The SOURce:FREQuency command.
  • .rccouple: The SOURce:RCCouple command.
  • .roscillator: The SOURce:ROSCillator command tree.

sourcex property 

sourcex: dict[int, SourceItem]

Return the SOURce[n] command tree.

Usage
  • Using the .query() method will send the SOURce[n]? query.
  • Using the .verify(value) method will send the SOURce[n]? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .casset: The SOURce[n]:CASSet command.
  • .dac: The SOURce[n]:DAC command tree.
  • .marker: The SOURce[n]:MARKer[m] command tree.
  • .power: The SOURce[n]:POWer command tree.
  • .rmode: The SOURce[n]:RMODe command.
  • .scstep: The SOURce[n]:SCSTep command.
  • .skew: The SOURce[n]:SKEW command.
  • .tinput: The SOURce[n]:TINPut command.
  • .voltage: The SOURce[n]:VOLTage command tree.
  • .waveform: The SOURce[n]:WAVeform command.
  • .jump: The SOURce[n]:JUMP command tree.

sre property 

sre: Sre

Return the *SRE command.

Description
  • The *SRE (Service Request Enable) command sets and queries the bits in the Service Request Enable Register. For more information, refer to Registers.
Usage
  • Using the .query() method will send the *SRE? query.
  • Using the .verify(value) method will send the *SRE? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the *SRE value command.
SCPI Syntax 
- *SRE <NR1>
- *SRE?
Info
  • <NR1> is a value in the range from 0 through 255. The binary bits of the SRER are set according to this value. Using an out-of-range value causes an execution error. The power-on default for SRER is 0 if *PSC is 1. If *PSC is 0, the SRER maintains the previous power cycle value through the current power cycle.

status property 

status: Status

Return the STATus command tree.

Usage
  • Using the .query() method will send the STATus? query.
  • Using the .verify(value) method will send the STATus? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .operation: The STATus:OPERation command tree.
  • .preset: The STATus:PRESet command.
  • .questionable: The STATus:QUEStionable command tree.

stb property 

stb: Stb

Return the *STB command.

Description
  • The *STB? (Read Status Byte) query returns the contents of the Status Byte Register (SBR) using the Master Summary Status (MSS) bit. For more information, refer to Registers.
Usage
  • Using the .query() method will send the *STB? query.
  • Using the .verify(value) method will send the *STB? query and raise an AssertionError if the returned value does not match value.
SCPI Syntax 
- *STB?

synchronize property 

synchronize: Synchronize

Return the SYNChronize command tree.

Usage
  • Using the .query() method will send the SYNChronize? query.
  • Using the .verify(value) method will send the SYNChronize? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .adjust: The SYNChronize:ADJust command tree.
  • .configure: The SYNChronize:CONFigure command.
  • .deskew: The SYNChronize:DESKew command tree.
  • .enable: The SYNChronize:ENABle command.
  • .type: The SYNChronize:TYPE command.

system property 

system: System

Return the SYSTem command tree.

Usage
  • Using the .query() method will send the SYSTem? query.
  • Using the .verify(value) method will send the SYSTem? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .date: The SYSTem:DATE command.
  • .error: The SYSTem:ERRor command tree.
  • .sid: The SYSTem:SID command tree.
  • .time: The SYSTem:TIME command.
  • .version: The SYSTem:VERSion command.

trg property 

trg: Trg

Return the *TRG command.

Description
  • Performs a group execute trigger on commands defined by *DDT.
Usage
  • Using the .write() method will send the *TRG command.
SCPI Syntax 
- *TRG

trigger property 

trigger: Trigger

Return the TRIGger command tree.

Usage
  • Using the .query() method will send the TRIGger? query.
  • Using the .verify(value) method will send the TRIGger? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .impedance: The TRIGger:IMPedance command.
  • .interval: The TRIGger:INTerval command.
  • .level: The TRIGger:LEVel command.
  • .mode: The TRIGger:MODE command.
  • .slope: The TRIGger:SLOPe command.
  • .source: The TRIGger:SOURce command.
  • .wvalue: The TRIGger:WVALue command.
  • .immediate: The TRIGger:IMMediate command.

tst property 

tst: Tst

Return the *TST command.

Description
  • Tests (self-test) the interface and returns a 0.
Usage
  • Using the .query() method will send the *TST? query.
  • Using the .verify(value) method will send the *TST? query and raise an AssertionError if the returned value does not match value.
SCPI Syntax 
- *TST?

wai property 

wai: Wai

Return the *WAI command.

Description
  • The *WAI (Wait) command (no query form) prevents the instrument from executing further commands or queries until all pending commands that generate an OPC message are complete. This command allows you to synchronize the operation of the instrument with your application program. For more information, refer to Synchronization Methods.
Usage
  • Using the .write() method will send the *WAI command.
SCPI Syntax 
- *WAI

wlist property 

wlist: Wlist

Return the WLISt command tree.

Usage
  • Using the .query() method will send the WLISt? query.
  • Using the .verify(value) method will send the WLISt? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .last: The WLISt:LAST command.
  • .list: The WLISt:LIST command.
  • .name: The WLISt:NAME command.
  • .size: The WLISt:SIZE command.
  • .sparameter: The WLISt:SPARameter command tree.
  • .waveform: The WLISt:WAVeform command tree.

wplugin property 

wplugin: Wplugin

Return the WPLugin command tree.

Usage
  • Using the .query() method will send the WPLugin? query.
  • Using the .verify(value) method will send the WPLugin? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .active: The WPLugin:ACTive command.
  • .plugins: The WPLugin:PLUGins command.

AWG70KAMixin

A mixin that provides access to the AWG70KA commands and constants.

Properties
  • .command_argument_constants: The AWG70KA command argument constants.
  • .commands: The AWG70KA commands.

command_argument_constants cached property 

command_argument_constants: AWG70KACommandConstants

Return the AWG70KA command argument constants.

This provides access to all the string constants which can be used as arguments for AWG70KA commands.

commands cached property 

commands: AWG70KACommands

Return the AWG70KA commands.

This provides access to all the commands for the AWG70KA device. See the documentation of each sub-property for more usage information.

Sub-properties
  • .active: The ACTive command tree.
  • .auxoutput: The AUXoutput[n] command tree.
  • .awgcontrol: The AWGControl command tree.
  • .bwaveform: The BWAVeform command tree.
  • .cal: The *CAL command.
  • .calibration: The CALibration command tree.
  • .clock: The CLOCk command tree.
  • .cls: The *CLS command.
  • .connectivity: The CONNectivity command tree.
  • .cplayback: The CPLayback command tree.
  • .diagnostic: The DIAGnostic command tree.
  • .display: The DISPlay command tree.
  • .ese: The *ESE command.
  • .esr: The *ESR command.
  • .fgen: The FGEN command tree.
  • .idn: The *IDN command.
  • .instrument: The INSTrument command tree.
  • .mmemory: The MMEMory command tree.
  • .opc: The *OPC command.
  • .opt: The *OPT command.
  • .output: The OUTPut command tree.
  • .outputx: The OUTPut[n] command tree.
  • .rst: The *RST command.
  • .slist: The SLISt command tree.
  • .source: The SOURce command tree.
  • .sourcex: The SOURce[n] command tree.
  • .sre: The *SRE command.
  • .status: The STATus command tree.
  • .stb: The *STB command.
  • .synchronize: The SYNChronize command tree.
  • .system: The SYSTem command tree.
  • .trg: The *TRG command.
  • .trigger: The TRIGger command tree.
  • .tst: The *TST command.
  • .wai: The *WAI command.
  • .wlist: The WLISt command tree.
  • .wplugin: The WPLugin command tree.