[python source code]

auxout

The auxout commands module.

These commands are used in the following models: DPO7AX

THIS FILE IS AUTO-GENERATED, IT SHOULD NOT BE MANUALLY MODIFIED.

Please report an issue if one is found.

Commands and Queries 
- AUXout:EDGE {RISing|FALling}
- AUXout:EDGE?
- AUXout:LOWLatency {ON|OFF|1|0}
- AUXout:LOWLatency?

Auxout

Bases: SCPICmdRead

The AUXout command tree.

Usage
  • Using the .query() method will send the AUXout? query.
  • Using the .verify(value) method will send the AUXout? query and raise an AssertionError if the returned value does not match value.
Properties
  • .edge: The AUXout:EDGE command.
  • .lowlatency: The AUXout:LOWLatency command.

edge property 

edge: AuxoutEdge

Return the AUXout:EDGE command.

Description
  • This command sets or queries the direction in which the Auxiliary Output signal will transition when a trigger occurs.
Usage
  • Using the .query() method will send the AUXout:EDGE? query.
  • Using the .verify(value) method will send the AUXout:EDGE? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the AUXout:EDGE value command.
SCPI Syntax 
- AUXout:EDGE {RISing|FALling}
- AUXout:EDGE?
Info
  • RISing sets the polarity to the rising edge.
  • FALling sets the polarity to the falling edge.

lowlatency property 

lowlatency: AuxoutLowlatency

Return the AUXout:LOWLatency command.

Description
  • When the low latency trigger out setting is enabled, the delay between a trigger occurring and a pulse appearing on the auxiliary output BNC connection is reduced.
Usage
  • Using the .query() method will send the AUXout:LOWLatency? query.
  • Using the .verify(value) method will send the AUXout:LOWLatency? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the AUXout:LOWLatency value command.
SCPI Syntax 
- AUXout:LOWLatency {ON|OFF|1|0}
- AUXout:LOWLatency?
Info
  • 1 or ON enable low latency trigger.
  • 0 or OFF disable low latency trigger.

AuxoutEdge

Bases: SCPICmdWrite, SCPICmdRead

The AUXout:EDGE command.

Description
  • This command sets or queries the direction in which the Auxiliary Output signal will transition when a trigger occurs.
Usage
  • Using the .query() method will send the AUXout:EDGE? query.
  • Using the .verify(value) method will send the AUXout:EDGE? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the AUXout:EDGE value command.
SCPI Syntax 
- AUXout:EDGE {RISing|FALling}
- AUXout:EDGE?
Info
  • RISing sets the polarity to the rising edge.
  • FALling sets the polarity to the falling edge.

AuxoutLowlatency

Bases: SCPICmdWrite, SCPICmdRead

The AUXout:LOWLatency command.

Description
  • When the low latency trigger out setting is enabled, the delay between a trigger occurring and a pulse appearing on the auxiliary output BNC connection is reduced.
Usage
  • Using the .query() method will send the AUXout:LOWLatency? query.
  • Using the .verify(value) method will send the AUXout:LOWLatency? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the AUXout:LOWLatency value command.
SCPI Syntax 
- AUXout:LOWLatency {ON|OFF|1|0}
- AUXout:LOWLatency?
Info
  • 1 or ON enable low latency trigger.
  • 0 or OFF disable low latency trigger.