bus ¶

The bus commands module.

These commands are used in the following models: DPO4K, DPO4KB, MDO4K, MSO4K

THIS FILE IS AUTO-GENERATED, IT SHOULD NOT BE MANUALLY MODIFIED.

Please report an issue if one is found.

Commands and Queries

- BUS:B<x>:ARINC429A:BITRate {LOW|HI|<NR1>}
- BUS:B<x>:ARINC429A:BITRate?
- BUS:B<x>:ARINC429A:DATA:FORMAT {DATA|SDIDATA|SDIDATASSM}
- BUS:B<x>:ARINC429A:DATA:FORMAT?
- BUS:B<x>:ARINC429A:POLarity {NORMal|INVERTed}
- BUS:B<x>:ARINC429A:POLarity?
- BUS:B<x>:ARINC429A:SOUrce {CH<x>|MATH|REF<x>}
- BUS:B<x>:ARINC429A:SOUrce?
- BUS:B<x>:AUDio:BITDelay <NR1>
- BUS:B<x>:AUDio:BITDelay?
- BUS:B<x>:AUDio:BITOrder {MSB|LSB}
- BUS:B<x>:AUDio:BITOrder?
- BUS:B<x>:AUDio:CHANnel:SIZe <NR1>
- BUS:B<x>:AUDio:CHANnel:SIZe?
- BUS:B<x>:AUDio:CLOCk:POLarity {FALL|RISe}
- BUS:B<x>:AUDio:CLOCk:POLarity?
- BUS:B<x>:AUDio:CLOCk:SOUrce {CH<x>|D<x>}
- BUS:B<x>:AUDio:CLOCk:SOUrce?
- BUS:B<x>:AUDio:DATa:POLarity {NORMal|INVERTed}
- BUS:B<x>:AUDio:DATa:POLarity?
- BUS:B<x>:AUDio:DATa:SIZe <NR1>
- BUS:B<x>:AUDio:DATa:SIZe?
- BUS:B<x>:AUDio:DATa:SOUrce {CH<x>|D<x>}
- BUS:B<x>:AUDio:DATa:SOUrce?
- BUS:B<x>:AUDio:DISplay:FORMat {BINary|HEXadecimal|SIGNEDDECimal}
- BUS:B<x>:AUDio:DISplay:FORMat?
- BUS:B<x>:AUDio:FRAME:SIZe <NR1>
- BUS:B<x>:AUDio:FRAME:SIZe?
- BUS:B<x>:AUDio:FRAMESync:POLarity {FALL|RISe}
- BUS:B<x>:AUDio:FRAMESync:POLarity?
- BUS:B<x>:AUDio:FRAMESync:SOUrce {CH<x>|D<x>}
- BUS:B<x>:AUDio:FRAMESync:SOUrce?
- BUS:B<x>:AUDio:TYPe {I2S|LJ|RJ|TDM}
- BUS:B<x>:AUDio:TYPe?
- BUS:B<x>:AUDio:WORDSel:POLarity {NORMal|INVERTed}
- BUS:B<x>:AUDio:WORDSel:POLarity?
- BUS:B<x>:AUDio:WORDSel:SOUrce {CH<x>|D<x>}
- BUS:B<x>:AUDio:WORDSel:SOUrce?
- BUS:B<x>:CAN:BITRate <NR1>
- BUS:B<x>:CAN:BITRate?
- BUS:B<x>:CAN:FD:BITRate <NR1>
- BUS:B<x>:CAN:FD:BITRate?
- BUS:B<x>:CAN:FD:STANDard {ISO | NONISO} string
- BUS:B<x>:CAN:FD:STANDard?
- BUS:B<x>:CAN:PRObe {CANH|CANL|RX|TX|DIFFerential}
- BUS:B<x>:CAN:PRObe?
- BUS:B<x>:CAN:SAMPLEpoint <NR1>
- BUS:B<x>:CAN:SAMPLEpoint?
- BUS:B<x>:CAN:SOUrce {CH<x>|D<x>}
- BUS:B<x>:CAN:SOUrce?
- BUS:B<x>:CAN:STANDard {CAN2X|CANFD} string
- BUS:B<x>:CAN:STANDard?
- BUS:B<x>:DISplay:FORMat {BINary|HEXadecimal|ASCII|MIXed|MIXED2|BLOCKHEX}
- BUS:B<x>:DISplay:FORMat?
- BUS:B<x>:DISplay:TYPe {BUS|BOTh}
- BUS:B<x>:DISplay:TYPe?
- BUS:B<x>:ETHERnet:PROTOcol {IPv4|OTHER}
- BUS:B<x>:ETHERnet:PROTOcol?
- BUS:B<x>:ETHERnet:PRObe {DIFFerential|SINGleended}
- BUS:B<x>:ETHERnet:PRObe?
- BUS:B<x>:ETHERnet:SOUrce:DIFFerential {CH<x>|MATH|REF<x>}
- BUS:B<x>:ETHERnet:SOUrce:DIFFerential?
- BUS:B<x>:ETHERnet:SOUrce:DMINus {CH<x>|D<x>}
- BUS:B<x>:ETHERnet:SOUrce:DMINus?
- BUS:B<x>:ETHERnet:TYPe {ENET10BASET|ENET100BASETX}
- BUS:B<x>:ETHERnet:TYPe?
- BUS:B<x>:FLEXray:BITRate <NR1>
- BUS:B<x>:FLEXray:BITRate?
- BUS:B<x>:FLEXray:CHannel {A|B}
- BUS:B<x>:FLEXray:CHannel?
- BUS:B<x>:FLEXray:SIGnal {BDIFFBP|BM|TXRX}
- BUS:B<x>:FLEXray:SIGnal?
- BUS:B<x>:FLEXray:SOUrce {CH<x>|D<x>}
- BUS:B<x>:FLEXray:SOUrce?
- BUS:B<x>:I2C:ADDRess:RWINClude {ON|OFF|<NR1>}
- BUS:B<x>:I2C:ADDRess:RWINClude?
- BUS:B<x>:I2C:CLOCk:SOUrce {CH<x>|D<x>}
- BUS:B<x>:I2C:CLOCk:SOUrce?
- BUS:B<x>:I2C:DATa:SOUrce {CH<x>|D<x>}
- BUS:B<x>:I2C:DATa:SOUrce?
- BUS:B<x>:I2C:SCLk:SOUrce {CH<x>|D<x>}
- BUS:B<x>:I2C:SCLk:SOUrce?
- BUS:B<x>:I2C:SDAta:SOUrce {CH<x>|D<x>}
- BUS:B<x>:I2C:SDAta:SOUrce?
- BUS:B<x>:LABel <Qstring>
- BUS:B<x>:LABel?
- BUS:B<x>:LIN:BITRate <NR1>
- BUS:B<x>:LIN:BITRate?
- BUS:B<x>:LIN:IDFORmat {NOPARity|PARity}
- BUS:B<x>:LIN:IDFORmat?
- BUS:B<x>:LIN:MAXBytedelim <NR1>
- BUS:B<x>:LIN:MAXBytedelim?
- BUS:B<x>:LIN:POLarity {NORMal|INVerted}
- BUS:B<x>:LIN:POLarity?
- BUS:B<x>:LIN:SAMPLEpoint <NR1>
- BUS:B<x>:LIN:SAMPLEpoint?
- BUS:B<x>:LIN:SOUrce {CH<x>|D<x>}
- BUS:B<x>:LIN:SOUrce?
- BUS:B<x>:LIN:STANDard {V1X|V2X|MIXed}
- BUS:B<x>:LIN:STANDard?
- BUS:B<x>:MIL1553B:POLarity {NORMal|INVERTed}
- BUS:B<x>:MIL1553B:POLarity?
- BUS:B<x>:MIL1553B:RESPonsetime:MAXimum <NR3>
- BUS:B<x>:MIL1553B:RESPonsetime:MAXimum?
- BUS:B<x>:MIL1553B:RESPonsetime:MINimum <NR3>
- BUS:B<x>:MIL1553B:RESPonsetime:MINimum?
- BUS:B<x>:MIL1553B:SOUrce {CH<x>|MATH|REF<x>}
- BUS:B<x>:MIL1553B:SOUrce?
- BUS:B<x>:PARallel:BIT<x>:SOUrce {CH<x>|D<x>}
- BUS:B<x>:PARallel:BIT<x>:SOUrce?
- BUS:B<x>:PARallel:CLOCk:EDGE {EITher|RISing|FALling}
- BUS:B<x>:PARallel:CLOCk:EDGE?
- BUS:B<x>:PARallel:CLOCk:ISCLOCKed {YES|NO}
- BUS:B<x>:PARallel:CLOCk:ISCLOCKed?
- BUS:B<x>:PARallel:CLOCk:SOUrce {CH<x>|D<x>}
- BUS:B<x>:PARallel:CLOCk:SOUrce?
- BUS:B<x>:PARallel:WIDth <NR1>
- BUS:B<x>:PARallel:WIDth?
- BUS:B<x>:POSition <NR3>
- BUS:B<x>:POSition?
- BUS:B<x>:RS232C:BITRate <NR1>
- BUS:B<x>:RS232C:BITRate?
- BUS:B<x>:RS232C:DATABits {7|8|9}
- BUS:B<x>:RS232C:DATABits?
- BUS:B<x>:RS232C:DELIMiter {NULl|LF|CR|SPace|XFF}
- BUS:B<x>:RS232C:DELIMiter?
- BUS:B<x>:RS232C:DISplaymode {FRAme|PACKET}
- BUS:B<x>:RS232C:DISplaymode?
- BUS:B<x>:RS232C:PARity {NONe|EVEN|ODD}
- BUS:B<x>:RS232C:PARity?
- BUS:B<x>:RS232C:POLarity {NORMal|INVERTed}
- BUS:B<x>:RS232C:POLarity?
- BUS:B<x>:RS232C:RX:SOUrce {CH<x>|D<x>|Off}
- BUS:B<x>:RS232C:RX:SOUrce?
- BUS:B<x>:RS232C:TX:SOUrce {CH<x>|D<x>|Off}
- BUS:B<x>:RS232C:TX:SOUrce?
- BUS:B<x>:SPI:BITOrder {LSB|MSB}
- BUS:B<x>:SPI:BITOrder?
- BUS:B<x>:SPI:CLOCk:POLarity {FALL|RISe}
- BUS:B<x>:SPI:CLOCk:POLarity?
- BUS:B<x>:SPI:CLOCk:SOUrce {CH<x>|D<x>}
- BUS:B<x>:SPI:CLOCk:SOUrce?
- BUS:B<x>:SPI:DATa:IN:POLarity {LOW|HIGH}
- BUS:B<x>:SPI:DATa:IN:POLarity?
- BUS:B<x>:SPI:DATa:IN:SOUrce {CH<x>|D<x>}
- BUS:B<x>:SPI:DATa:IN:SOUrce?
- BUS:B<x>:SPI:DATa:MISO:POLarity {LOW|HIGH}
- BUS:B<x>:SPI:DATa:MISO:POLarity?
- BUS:B<x>:SPI:DATa:MISO:SOUrce {CH<x>|D<x>}
- BUS:B<x>:SPI:DATa:MISO:SOUrce?
- BUS:B<x>:SPI:DATa:MOSI:POLarity {LOW|HIGH}
- BUS:B<x>:SPI:DATa:MOSI:POLarity?
- BUS:B<x>:SPI:DATa:MOSI:SOUrce {CH<x>|D<x>}
- BUS:B<x>:SPI:DATa:MOSI:SOUrce?
- BUS:B<x>:SPI:DATa:OUT:POLarity {LOW|HIGH}
- BUS:B<x>:SPI:DATa:OUT:POLarity?
- BUS:B<x>:SPI:DATa:OUT:SOUrce {CH<x>|D<x>}
- BUS:B<x>:SPI:DATa:OUT:SOUrce?
- BUS:B<x>:SPI:DATa:SIZe <NR1>
- BUS:B<x>:SPI:DATa:SIZe?
- BUS:B<x>:SPI:FRAMING {SS|IDLEtime}
- BUS:B<x>:SPI:FRAMING?
- BUS:B<x>:SPI:IDLETime <NR3>
- BUS:B<x>:SPI:IDLETime?
- BUS:B<x>:SPI:SCLk:POLarity {FALL|RISe}
- BUS:B<x>:SPI:SCLk:POLarity?
- BUS:B<x>:SPI:SCLk:SOUrce {CH<x>|D<x>}
- BUS:B<x>:SPI:SCLk:SOUrce?
- BUS:B<x>:SPI:SELect:POLarity {LOW|HIGH}
- BUS:B<x>:SPI:SELect:POLarity?
- BUS:B<x>:SPI:SELect:SOUrce {CH<x>|D<x>}
- BUS:B<x>:SPI:SELect:SOUrce?
- BUS:B<x>:SPI:SS:POLarity {LOW|HIGH}
- BUS:B<x>:SPI:SS:POLarity?
- BUS:B<x>:SPI:SS:SOUrce {CH<x>|D<x>}
- BUS:B<x>:SPI:SS:SOUrce?
- BUS:B<x>:STATE {ON|OFF|<NR1>}
- BUS:B<x>:STATE?
- BUS:B<x>:TYPe {I2C|SPI|CAN|RS232C|PARallel|USB|LIN|FLEXRay|AUDio|ETHERnet|MIL1553B|ARINC429A}
- BUS:B<x>:TYPe?
- BUS:B<x>:USB:BITRate {LOW|FULL|HIGH}
- BUS:B<x>:USB:BITRate?
- BUS:B<x>:USB:PRObe {DIFFerential|SINGleended}
- BUS:B<x>:USB:PRObe?
- BUS:B<x>:USB:SOUrce:DIFFerential {CH<x>|MATH|REF<x>}
- BUS:B<x>:USB:SOUrce:DIFFerential?
- BUS:B<x>:USB:SOUrce:DMINus {CH<x>|D<x>}
- BUS:B<x>:USB:SOUrce:DMINus?
- BUS:B<x>:USB:SOUrce:DPLUs {CH<x>|D<x>}
- BUS:B<x>:USB:SOUrce:DPLUs?
- BUS:LOWerthreshold:CH<x> {<NR3>|ECL|TTL}
- BUS:LOWerthreshold:CH<x>?
- BUS:LOWerthreshold:MATH {<NR3>|ECL|TTL}
- BUS:LOWerthreshold:MATH1 {<NR3>|ECL|TTL}
- BUS:LOWerthreshold:MATH1?
- BUS:LOWerthreshold:MATH?
- BUS:LOWerthreshold:REF<x> {<NR3>|ECL|TTL}
- BUS:LOWerthreshold:REF<x>?
- BUS:THReshold:CH<x> {ECL|TTL|<NR3>}
- BUS:THReshold:CH<x>?
- BUS:THReshold:D<x> {<NR3>|ECL|TTL}
- BUS:THReshold:D<x>?
- BUS:UPPerthreshold:CH<x> {<NR3>|ECL|TTL}
- BUS:UPPerthreshold:CH<x>?
- BUS:UPPerthreshold:MATH {<NR3>|ECL|TTL}
- BUS:UPPerthreshold:MATH1 {<NR3>|ECL|TTL}
- BUS:UPPerthreshold:MATH1?
- BUS:UPPerthreshold:MATH?
- BUS:UPPerthreshold:REF<x> {<NR3>|ECL|TTL}
- BUS:UPPerthreshold:REF<x>?
- BUS?

Bus ¶

Bases: SCPICmdRead

The BUS command.

Description

Returns the parameters for each serial (if installed) and parallel bus.

Usage

Using the .query() method will send the BUS? query.
Using the .verify(value) method will send the BUS? query and raise an AssertionError if the returned value does not match value.

SCPI Syntax

- BUS?

Properties

.b: The BUS:B<x> command tree.
.lowerthreshold: The BUS:LOWerthreshold command tree.
.threshold: The BUS:THReshold command tree.
.upperthreshold: The BUS:UPPerthreshold command tree.

b `property` ¶

b: dict[int, BusBItem]

Return the BUS:B<x> command tree.

Usage

Using the .query() method will send the BUS:B<x>? query.
Using the .verify(value) method will send the BUS:B<x>? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.arinc429a: The BUS:B<x>:ARINC429A command tree.
.audio: The BUS:B<x>:AUDio command tree.
.can: The BUS:B<x>:CAN command tree.
.display: The BUS:B<x>:DISplay command tree.
.ethernet: The BUS:B<x>:ETHERnet command tree.
.flexray: The BUS:B<x>:FLEXray command tree.
.i2c: The BUS:B<x>:I2C command tree.
.label: The BUS:B<x>:LABel command.
.lin: The BUS:B<x>:LIN command tree.
.mil1553b: The BUS:B<x>:MIL1553B command tree.
.parallel: The BUS:B<x>:PARallel command tree.
.position: The BUS:B<x>:POSition command.
.rs232c: The BUS:B<x>:RS232C command tree.
.spi: The BUS:B<x>:SPI command tree.
.state: The BUS:B<x>:STATE command.
.type: The BUS:B<x>:TYPe command.
.usb: The BUS:B<x>:USB command tree.

lowerthreshold `property` ¶

lowerthreshold: BusLowerthreshold

Return the BUS:LOWerthreshold command tree.

Usage

Using the .query() method will send the BUS:LOWerthreshold? query.
Using the .verify(value) method will send the BUS:LOWerthreshold? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.ch: The BUS:LOWerthreshold:CH<x> command.
.ref: The BUS:LOWerthreshold:REF<x> command.
.math: The BUS:LOWerthreshold:MATH command.
.math1: The BUS:LOWerthreshold:MATH1 command.

threshold `property` ¶

threshold: BusThreshold

Return the BUS:THReshold command tree.

Usage

Using the .query() method will send the BUS:THReshold? query.
Using the .verify(value) method will send the BUS:THReshold? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.ch: The BUS:THReshold:CH<x> command.
.d: The BUS:THReshold:D<x> command.

upperthreshold `property` ¶

upperthreshold: BusUpperthreshold

Return the BUS:UPPerthreshold command tree.

Usage

Using the .query() method will send the BUS:UPPerthreshold? query.
Using the .verify(value) method will send the BUS:UPPerthreshold? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.ch: The BUS:UPPerthreshold:CH<x> command.
.ref: The BUS:UPPerthreshold:REF<x> command.
.math: The BUS:UPPerthreshold:MATH command.
.math1: The BUS:UPPerthreshold:MATH1 command.

BusBItem ¶

Bases: ValidatedDynamicNumberCmd, SCPICmdRead

The BUS:B<x> command tree.

Usage

Using the .query() method will send the BUS:B<x>? query.
Using the .verify(value) method will send the BUS:B<x>? query and raise an AssertionError if the returned value does not match value.

Properties

.arinc429a: The BUS:B<x>:ARINC429A command tree.
.audio: The BUS:B<x>:AUDio command tree.
.can: The BUS:B<x>:CAN command tree.
.display: The BUS:B<x>:DISplay command tree.
.ethernet: The BUS:B<x>:ETHERnet command tree.
.flexray: The BUS:B<x>:FLEXray command tree.
.i2c: The BUS:B<x>:I2C command tree.
.label: The BUS:B<x>:LABel command.
.lin: The BUS:B<x>:LIN command tree.
.mil1553b: The BUS:B<x>:MIL1553B command tree.
.parallel: The BUS:B<x>:PARallel command tree.
.position: The BUS:B<x>:POSition command.
.rs232c: The BUS:B<x>:RS232C command tree.
.spi: The BUS:B<x>:SPI command tree.
.state: The BUS:B<x>:STATE command.
.type: The BUS:B<x>:TYPe command.
.usb: The BUS:B<x>:USB command tree.

arinc429a `property` ¶

arinc429a: BusBItemArinc429a

Return the BUS:B<x>:ARINC429A command tree.

Usage

Using the .query() method will send the BUS:B<x>:ARINC429A? query.
Using the .verify(value) method will send the BUS:B<x>:ARINC429A? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.bitrate: The BUS:B<x>:ARINC429A:BITRate command.
.data: The BUS:B<x>:ARINC429A:DATA command tree.
.polarity: The BUS:B<x>:ARINC429A:POLarity command.
.source: The BUS:B<x>:ARINC429A:SOUrce command.

audio `property` ¶

audio: BusBItemAudio

Return the BUS:B<x>:AUDio command tree.

Usage

Using the .query() method will send the BUS:B<x>:AUDio? query.
Using the .verify(value) method will send the BUS:B<x>:AUDio? query and raise an AssertionError if the returned value does not match value.

Info

B<x> is the number of the bus.

Sub-properties

.bitdelay: The BUS:B<x>:AUDio:BITDelay command.
.bitorder: The BUS:B<x>:AUDio:BITOrder command.
.channel: The BUS:B<x>:AUDio:CHANnel command tree.
.clock: The BUS:B<x>:AUDio:CLOCk command tree.
.data: The BUS:B<x>:AUDio:DATa command tree.
.display: The BUS:B<x>:AUDio:DISplay command tree.
.frame: The BUS:B<x>:AUDio:FRAME command tree.
.framesync: The BUS:B<x>:AUDio:FRAMESync command tree.
.type: The BUS:B<x>:AUDio:TYPe command.
.wordsel: The BUS:B<x>:AUDio:WORDSel command tree.

can `property` ¶

can: BusBItemCan

Return the BUS:B<x>:CAN command tree.

Usage

Using the .query() method will send the BUS:B<x>:CAN? query.
Using the .verify(value) method will send the BUS:B<x>:CAN? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.bitrate: The BUS:B<x>:CAN:BITRate command.
.fd: The BUS:B<x>:CAN:FD command tree.
.probe: The BUS:B<x>:CAN:PRObe command.
.samplepoint: The BUS:B<x>:CAN:SAMPLEpoint command.
.source: The BUS:B<x>:CAN:SOUrce command.
.standard: The BUS:B<x>:CAN:STANDard command.

display `property` ¶

display: BusBItemDisplay

Return the BUS:B<x>:DISplay command tree.

Usage

Using the .query() method will send the BUS:B<x>:DISplay? query.
Using the .verify(value) method will send the BUS:B<x>:DISplay? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.format: The BUS:B<x>:DISplay:FORMat command.
.type: The BUS:B<x>:DISplay:TYPe command.

ethernet `property` ¶

ethernet: BusBItemEthernet

Return the BUS:B<x>:ETHERnet command tree.

Usage

Using the .query() method will send the BUS:B<x>:ETHERnet? query.
Using the .verify(value) method will send the BUS:B<x>:ETHERnet? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.protocol: The BUS:B<x>:ETHERnet:PROTOcol command.
.probe: The BUS:B<x>:ETHERnet:PRObe command.
.source: The BUS:B<x>:ETHERnet:SOUrce command tree.
.type: The BUS:B<x>:ETHERnet:TYPe command.

flexray `property` ¶

flexray: BusBItemFlexray

Return the BUS:B<x>:FLEXray command tree.

Usage

Using the .query() method will send the BUS:B<x>:FLEXray? query.
Using the .verify(value) method will send the BUS:B<x>:FLEXray? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.bitrate: The BUS:B<x>:FLEXray:BITRate command.
.channel: The BUS:B<x>:FLEXray:CHannel command.
.signal: The BUS:B<x>:FLEXray:SIGnal command.
.source: The BUS:B<x>:FLEXray:SOUrce command.

i2c `property` ¶

i2c: BusBItemI2c

Return the BUS:B<x>:I2C command tree.

Usage

Using the .query() method will send the BUS:B<x>:I2C? query.
Using the .verify(value) method will send the BUS:B<x>:I2C? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.address: The BUS:B<x>:I2C:ADDRess command tree.
.clock: The BUS:B<x>:I2C:CLOCk command tree.
.sclk: The BUS:B<x>:I2C:SCLk command tree.
.data: The BUS:B<x>:I2C:DATa command tree.
.sdata: The BUS:B<x>:I2C:SDAta command tree.

label `property` ¶

label: BusBItemLabel

Return the BUS:B<x>:LABel command.

Description

Specifies the waveform label for the bus.

Usage

Using the .query() method will send the BUS:B<x>:LABel? query.
Using the .verify(value) method will send the BUS:B<x>:LABel? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:LABel value command.

SCPI Syntax

- BUS:B<x>:LABel <Qstring>
- BUS:B<x>:LABel?

Info

<Qstring> is an alphanumeric string of text, enclosed in quotes, that contains the text label information for bus . The text string is limited to 30 characters.

lin `property` ¶

lin: BusBItemLin

Return the BUS:B<x>:LIN command tree.

Usage

Using the .query() method will send the BUS:B<x>:LIN? query.
Using the .verify(value) method will send the BUS:B<x>:LIN? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.bitrate: The BUS:B<x>:LIN:BITRate command.
.idformat: The BUS:B<x>:LIN:IDFORmat command.
.maxbytedelim: The BUS:B<x>:LIN:MAXBytedelim command.
.polarity: The BUS:B<x>:LIN:POLarity command.
.samplepoint: The BUS:B<x>:LIN:SAMPLEpoint command.
.source: The BUS:B<x>:LIN:SOUrce command.
.standard: The BUS:B<x>:LIN:STANDard command.

mil1553b `property` ¶

mil1553b: BusBItemMil1553b

Return the BUS:B<x>:MIL1553B command tree.

Usage

Using the .query() method will send the BUS:B<x>:MIL1553B? query.
Using the .verify(value) method will send the BUS:B<x>:MIL1553B? query and raise an AssertionError if the returned value does not match value.

Info

B<x> is the number of the bus.

Sub-properties

.polarity: The BUS:B<x>:MIL1553B:POLarity command.
.responsetime: The BUS:B<x>:MIL1553B:RESPonsetime command tree.
.source: The BUS:B<x>:MIL1553B:SOUrce command.

parallel `property` ¶

parallel: BusBItemParallel

Return the BUS:B<x>:PARallel command tree.

Usage

Using the .query() method will send the BUS:B<x>:PARallel? query.
Using the .verify(value) method will send the BUS:B<x>:PARallel? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.bit: The BUS:B<x>:PARallel:BIT<x> command tree.
.clock: The BUS:B<x>:PARallel:CLOCk command tree.
.width: The BUS:B<x>:PARallel:WIDth command.

position `property` ¶

position: BusBItemPosition

Return the BUS:B<x>:POSition command.

Description

This command specifies the position of the bus waveform on the display.

Usage

Using the .query() method will send the BUS:B<x>:POSition? query.
Using the .verify(value) method will send the BUS:B<x>:POSition? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:POSition value command.

SCPI Syntax

- BUS:B<x>:POSition <NR3>
- BUS:B<x>:POSition?

Info

<NR3> is a floating point number that specifies the position of the bus waveform on the display.

rs232c `property` ¶

rs232c: BusBItemRs232c

Return the BUS:B<x>:RS232C command tree.

Usage

Using the .query() method will send the BUS:B<x>:RS232C? query.
Using the .verify(value) method will send the BUS:B<x>:RS232C? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.bitrate: The BUS:B<x>:RS232C:BITRate command.
.databits: The BUS:B<x>:RS232C:DATABits command.
.delimiter: The BUS:B<x>:RS232C:DELIMiter command.
.displaymode: The BUS:B<x>:RS232C:DISplaymode command.
.parity: The BUS:B<x>:RS232C:PARity command.
.polarity: The BUS:B<x>:RS232C:POLarity command.
.rx: The BUS:B<x>:RS232C:RX command tree.
.tx: The BUS:B<x>:RS232C:TX command tree.

spi `property` ¶

spi: BusBItemSpi

Return the BUS:B<x>:SPI command tree.

Usage

Using the .query() method will send the BUS:B<x>:SPI? query.
Using the .verify(value) method will send the BUS:B<x>:SPI? query and raise an AssertionError if the returned value does not match value.

Info

B<x> is the number of the bus waveform.

Sub-properties

.bitorder: The BUS:B<x>:SPI:BITOrder command.
.data: The BUS:B<x>:SPI:DATa command tree.
.framing: The BUS:B<x>:SPI:FRAMING command.
.idletime: The BUS:B<x>:SPI:IDLETime command.
.clock: The BUS:B<x>:SPI:CLOCk command tree.
.sclk: The BUS:B<x>:SPI:SCLk command tree.
.select: The BUS:B<x>:SPI:SELect command tree.
.ss: The BUS:B<x>:SPI:SS command tree.

state `property` ¶

state: BusBItemState

Return the BUS:B<x>:STATE command.

Description

This command specifies the on/off state of the bus.

Usage

Using the .query() method will send the BUS:B<x>:STATE? query.
Using the .verify(value) method will send the BUS:B<x>:STATE? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:STATE value command.

SCPI Syntax

- BUS:B<x>:STATE {ON|OFF|<NR1>}
- BUS:B<x>:STATE?

Info

ON or ≠ 0 turns on the bus.
OFF or = 0 turns off the bus.

type `property` ¶

type: BusBItemType

Return the BUS:B<x>:TYPe command.

Description

This command specifies (or queries) the bus type. The supported bus types are dependent on the oscilloscope model and the installed application models. With the exception of the parallel bus, all bus types require installation of an application option.

Usage

Using the .query() method will send the BUS:B<x>:TYPe? query.
Using the .verify(value) method will send the BUS:B<x>:TYPe? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:TYPe value command.

SCPI Syntax

- BUS:B<x>:TYPe {I2C|SPI|CAN|RS232C|PARallel|USB|LIN|FLEXRay|AUDio|ETHERnet|MIL1553B|ARINC429A}
- BUS:B<x>:TYPe?

Info

I2C specifies the Inter-IC bus.
SPI specifies the Serial Peripheral Interface bus (not available on two-channel models).
CAN specifies the Controller Area Network bus.
RS232C specifies the RS-232C bus.
PARallel specifies the Parallel bus.
USB specifies the USB bus.
LIN specifies the LIN bus.
FLEXRay specifies the FLexRay bus.
AUDio specifies the audio bus.
ETHERnet specifies the Ethernet bus.
MIL1553B specifies the MIL-STD-1553 bus.
ARINC429A specifies the Aeronautical Radio INC (specification 429) bus.

usb `property` ¶

usb: BusBItemUsb

Return the BUS:B<x>:USB command tree.

Usage

Using the .query() method will send the BUS:B<x>:USB? query.
Using the .verify(value) method will send the BUS:B<x>:USB? query and raise an AssertionError if the returned value does not match value.

Info

B<x> is the number of the bus waveform.

Sub-properties

.bitrate: The BUS:B<x>:USB:BITRate command.
.probe: The BUS:B<x>:USB:PRObe command.
.source: The BUS:B<x>:USB:SOUrce command tree.

BusBItemArinc429a ¶

Bases: SCPICmdRead

The BUS:B<x>:ARINC429A command tree.

Usage

Using the .query() method will send the BUS:B<x>:ARINC429A? query.
Using the .verify(value) method will send the BUS:B<x>:ARINC429A? query and raise an AssertionError if the returned value does not match value.

Properties

.bitrate: The BUS:B<x>:ARINC429A:BITRate command.
.data: The BUS:B<x>:ARINC429A:DATA command tree.
.polarity: The BUS:B<x>:ARINC429A:POLarity command.
.source: The BUS:B<x>:ARINC429A:SOUrce command.

bitrate `property` ¶

bitrate: BusBItemArinc429aBitrate

Return the BUS:B<x>:ARINC429A:BITRate command.

Description

This command specifies the bit rate for the ARINC429 bus.

Usage

Using the .query() method will send the BUS:B<x>:ARINC429A:BITRate? query.
Using the .verify(value) method will send the BUS:B<x>:ARINC429A:BITRate? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:ARINC429A:BITRate value command.

SCPI Syntax

- BUS:B<x>:ARINC429A:BITRate {LOW|HI|<NR1>}
- BUS:B<x>:ARINC429A:BITRate?

Info

LOW sets the ARINC429 bit rate to handle low speed signals (12000 bits-per-second to 14500 bits-per-second).
HI sets the ARINC429 bit rate to handle high speed signals (100,000 bits-per-second).
<NR1> is a bit rate in bits-per-second. You can enter any positive integer, and the instrument will coerce the value to the closest supported bit rate.

data `property` ¶

data: BusBItemArinc429aData

Return the BUS:B<x>:ARINC429A:DATA command tree.

Usage

Using the .query() method will send the BUS:B<x>:ARINC429A:DATA? query.
Using the .verify(value) method will send the BUS:B<x>:ARINC429A:DATA? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.format: The BUS:B<x>:ARINC429A:DATA:FORMAT command.

polarity `property` ¶

polarity: BusBItemArinc429aPolarity

Return the BUS:B<x>:ARINC429A:POLarity command.

Description

This command sets the polarity of the ARINC429 bus (normal or inverted).

Usage

Using the .query() method will send the BUS:B<x>:ARINC429A:POLarity? query.
Using the .verify(value) method will send the BUS:B<x>:ARINC429A:POLarity? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:ARINC429A:POLarity value command.

SCPI Syntax

- BUS:B<x>:ARINC429A:POLarity {NORMal|INVERTed}
- BUS:B<x>:ARINC429A:POLarity?

Info

NORMal - A positive differential pulse in the first half of a bit period that then returns to zero differential represents a 1 on the differential source.
INVERTed - A positive differential pulse in the first half of a bit period that then returns to zero differential represents a 0 on the differential source.

source `property` ¶

source: BusBItemArinc429aSource

Return the BUS:B<x>:ARINC429A:SOUrce command.

Description

This command specifies the source for the differential input for the ARINC429 bus.

Usage

Using the .query() method will send the BUS:B<x>:ARINC429A:SOUrce? query.
Using the .verify(value) method will send the BUS:B<x>:ARINC429A:SOUrce? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:ARINC429A:SOUrce value command.

SCPI Syntax

- BUS:B<x>:ARINC429A:SOUrce {CH<x>|MATH|REF<x>}
- BUS:B<x>:ARINC429A:SOUrce?

Info

CH<x> specifies an analog channel as the source for the differential input.
MATH specifies the math waveform as the source for differential input.
REF<x> specifies a reference waveform as the source for differential input.

BusBItemArinc429aBitrate ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:ARINC429A:BITRate command.

Description

This command specifies the bit rate for the ARINC429 bus.

Usage

Using the .query() method will send the BUS:B<x>:ARINC429A:BITRate? query.
Using the .verify(value) method will send the BUS:B<x>:ARINC429A:BITRate? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:ARINC429A:BITRate value command.

SCPI Syntax

- BUS:B<x>:ARINC429A:BITRate {LOW|HI|<NR1>}
- BUS:B<x>:ARINC429A:BITRate?

Info

LOW sets the ARINC429 bit rate to handle low speed signals (12000 bits-per-second to 14500 bits-per-second).
HI sets the ARINC429 bit rate to handle high speed signals (100,000 bits-per-second).
<NR1> is a bit rate in bits-per-second. You can enter any positive integer, and the instrument will coerce the value to the closest supported bit rate.

BusBItemArinc429aData ¶

Bases: SCPICmdRead

The BUS:B<x>:ARINC429A:DATA command tree.

Usage

Using the .query() method will send the BUS:B<x>:ARINC429A:DATA? query.
Using the .verify(value) method will send the BUS:B<x>:ARINC429A:DATA? query and raise an AssertionError if the returned value does not match value.

Properties

.format: The BUS:B<x>:ARINC429A:DATA:FORMAT command.

format `property` ¶

format: BusBItemArinc429aDataFormat

Return the BUS:B<x>:ARINC429A:DATA:FORMAT command.

Description

Specifies the format of the DATA field in ARINC429 packets on a bus.

Usage

Using the .query() method will send the BUS:B<x>:ARINC429A:DATA:FORMAT? query.
Using the .verify(value) method will send the BUS:B<x>:ARINC429A:DATA:FORMAT? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:ARINC429A:DATA:FORMAT value command.

SCPI Syntax

- BUS:B<x>:ARINC429A:DATA:FORMAT {DATA|SDIDATA|SDIDATASSM}
- BUS:B<x>:ARINC429A:DATA:FORMAT?

Info

DATA sets the ARINC429 DATA field width to 19 bits wide (covering bits 11 through 29 of the 32 bit packet).
SDIDATA sets the ARINC429 DATA field width to 21 bits wide (covering bits 9 through 29 of the 32 bit packet).
SDIDATASSM sets the ARINC429 DATA field width to 23 bits wide (covering bits 9 through 31 of the 32 bit packet).

BusBItemArinc429aDataFormat ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:ARINC429A:DATA:FORMAT command.

Description

Specifies the format of the DATA field in ARINC429 packets on a bus.

Usage

Using the .query() method will send the BUS:B<x>:ARINC429A:DATA:FORMAT? query.
Using the .verify(value) method will send the BUS:B<x>:ARINC429A:DATA:FORMAT? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:ARINC429A:DATA:FORMAT value command.

SCPI Syntax

- BUS:B<x>:ARINC429A:DATA:FORMAT {DATA|SDIDATA|SDIDATASSM}
- BUS:B<x>:ARINC429A:DATA:FORMAT?

Info

DATA sets the ARINC429 DATA field width to 19 bits wide (covering bits 11 through 29 of the 32 bit packet).
SDIDATA sets the ARINC429 DATA field width to 21 bits wide (covering bits 9 through 29 of the 32 bit packet).
SDIDATASSM sets the ARINC429 DATA field width to 23 bits wide (covering bits 9 through 31 of the 32 bit packet).

BusBItemArinc429aPolarity ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:ARINC429A:POLarity command.

Description

This command sets the polarity of the ARINC429 bus (normal or inverted).

Usage

Using the .query() method will send the BUS:B<x>:ARINC429A:POLarity? query.
Using the .verify(value) method will send the BUS:B<x>:ARINC429A:POLarity? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:ARINC429A:POLarity value command.

SCPI Syntax

- BUS:B<x>:ARINC429A:POLarity {NORMal|INVERTed}
- BUS:B<x>:ARINC429A:POLarity?

Info

NORMal - A positive differential pulse in the first half of a bit period that then returns to zero differential represents a 1 on the differential source.
INVERTed - A positive differential pulse in the first half of a bit period that then returns to zero differential represents a 0 on the differential source.

BusBItemArinc429aSource ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:ARINC429A:SOUrce command.

Description

This command specifies the source for the differential input for the ARINC429 bus.

Usage

Using the .query() method will send the BUS:B<x>:ARINC429A:SOUrce? query.
Using the .verify(value) method will send the BUS:B<x>:ARINC429A:SOUrce? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:ARINC429A:SOUrce value command.

SCPI Syntax

- BUS:B<x>:ARINC429A:SOUrce {CH<x>|MATH|REF<x>}
- BUS:B<x>:ARINC429A:SOUrce?

Info

CH<x> specifies an analog channel as the source for the differential input.
MATH specifies the math waveform as the source for differential input.
REF<x> specifies a reference waveform as the source for differential input.

BusBItemAudio ¶

Bases: SCPICmdRead

The BUS:B<x>:AUDio command tree.

Usage

Using the .query() method will send the BUS:B<x>:AUDio? query.
Using the .verify(value) method will send the BUS:B<x>:AUDio? query and raise an AssertionError if the returned value does not match value.

Info

B<x> is the number of the bus.

Properties

.bitdelay: The BUS:B<x>:AUDio:BITDelay command.
.bitorder: The BUS:B<x>:AUDio:BITOrder command.
.channel: The BUS:B<x>:AUDio:CHANnel command tree.
.clock: The BUS:B<x>:AUDio:CLOCk command tree.
.data: The BUS:B<x>:AUDio:DATa command tree.
.display: The BUS:B<x>:AUDio:DISplay command tree.
.frame: The BUS:B<x>:AUDio:FRAME command tree.
.framesync: The BUS:B<x>:AUDio:FRAMESync command tree.
.type: The BUS:B<x>:AUDio:TYPe command.
.wordsel: The BUS:B<x>:AUDio:WORDSel command tree.

bitdelay `property` ¶

bitdelay: BusBItemAudioBitdelay

Return the BUS:B<x>:AUDio:BITDelay command.

Description

Specifies the number of delay bits for the AUDIO bus.

Usage

Using the .query() method will send the BUS:B<x>:AUDio:BITDelay? query.
Using the .verify(value) method will send the BUS:B<x>:AUDio:BITDelay? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:AUDio:BITDelay value command.

SCPI Syntax

- BUS:B<x>:AUDio:BITDelay <NR1>
- BUS:B<x>:AUDio:BITDelay?

Info

B<x> is the number of the bus.
<NR1> specifies the number of delay bits.

bitorder `property` ¶

bitorder: BusBItemAudioBitorder

Return the BUS:B<x>:AUDio:BITOrder command.

Description

Specifies the bit order for the AUDIO bus.

Usage

Using the .query() method will send the BUS:B<x>:AUDio:BITOrder? query.
Using the .verify(value) method will send the BUS:B<x>:AUDio:BITOrder? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:AUDio:BITOrder value command.

SCPI Syntax

- BUS:B<x>:AUDio:BITOrder {MSB|LSB}
- BUS:B<x>:AUDio:BITOrder?

Info

B<x> is the number of the bus.
MSB specifies that the most significant bit will be expected first in the order.
LSB specifies that the least significant bit will be expected first in the order.

channel `property` ¶

channel: BusBItemAudioChannel

Return the BUS:B<x>:AUDio:CHANnel command tree.

Usage

Using the .query() method will send the BUS:B<x>:AUDio:CHANnel? query.
Using the .verify(value) method will send the BUS:B<x>:AUDio:CHANnel? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.size: The BUS:B<x>:AUDio:CHANnel:SIZe command.

clock `property` ¶

clock: BusBItemAudioClock

Return the BUS:B<x>:AUDio:CLOCk command tree.

Usage

Using the .query() method will send the BUS:B<x>:AUDio:CLOCk? query.
Using the .verify(value) method will send the BUS:B<x>:AUDio:CLOCk? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.polarity: The BUS:B<x>:AUDio:CLOCk:POLarity command.
.source: The BUS:B<x>:AUDio:CLOCk:SOUrce command.

data `property` ¶

data: BusBItemAudioData

Return the BUS:B<x>:AUDio:DATa command tree.

Usage

Using the .query() method will send the BUS:B<x>:AUDio:DATa? query.
Using the .verify(value) method will send the BUS:B<x>:AUDio:DATa? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.polarity: The BUS:B<x>:AUDio:DATa:POLarity command.
.size: The BUS:B<x>:AUDio:DATa:SIZe command.
.source: The BUS:B<x>:AUDio:DATa:SOUrce command.

display `property` ¶

display: BusBItemAudioDisplay

Return the BUS:B<x>:AUDio:DISplay command tree.

Usage

Using the .query() method will send the BUS:B<x>:AUDio:DISplay? query.
Using the .verify(value) method will send the BUS:B<x>:AUDio:DISplay? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.format: The BUS:B<x>:AUDio:DISplay:FORMat command.

frame `property` ¶

frame: BusBItemAudioFrame

Return the BUS:B<x>:AUDio:FRAME command tree.

Usage

Using the .query() method will send the BUS:B<x>:AUDio:FRAME? query.
Using the .verify(value) method will send the BUS:B<x>:AUDio:FRAME? query and raise an AssertionError if the returned value does not match value.

Info

B<x> is the number of the bus.

Sub-properties

.size: The BUS:B<x>:AUDio:FRAME:SIZe command.

framesync `property` ¶

framesync: BusBItemAudioFramesync

Return the BUS:B<x>:AUDio:FRAMESync command tree.

Usage

Using the .query() method will send the BUS:B<x>:AUDio:FRAMESync? query.
Using the .verify(value) method will send the BUS:B<x>:AUDio:FRAMESync? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.polarity: The BUS:B<x>:AUDio:FRAMESync:POLarity command.
.source: The BUS:B<x>:AUDio:FRAMESync:SOUrce command.

type `property` ¶

type: BusBItemAudioType

Return the BUS:B<x>:AUDio:TYPe command.

Description

Specifies the audio format (type) for the AUDIO bus.

Usage

Using the .query() method will send the BUS:B<x>:AUDio:TYPe? query.
Using the .verify(value) method will send the BUS:B<x>:AUDio:TYPe? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:AUDio:TYPe value command.

SCPI Syntax

- BUS:B<x>:AUDio:TYPe {I2S|LJ|RJ|TDM}
- BUS:B<x>:AUDio:TYPe?

Info

B<x> is the number of the bus.
I2S specifies the I2S audio format.
LJ specifies the left-justified audio format.
RJ specifies the right-justified audio format.
TDM specifies the time-division multiplexing audio format.

wordsel `property` ¶

wordsel: BusBItemAudioWordsel

Return the BUS:B<x>:AUDio:WORDSel command tree.

Usage

Using the .query() method will send the BUS:B<x>:AUDio:WORDSel? query.
Using the .verify(value) method will send the BUS:B<x>:AUDio:WORDSel? query and raise an AssertionError if the returned value does not match value.

Info

B<x> is the number of the bus.

Sub-properties

.polarity: The BUS:B<x>:AUDio:WORDSel:POLarity command.
.source: The BUS:B<x>:AUDio:WORDSel:SOUrce command.

BusBItemAudioBitdelay ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:AUDio:BITDelay command.

Description

Specifies the number of delay bits for the AUDIO bus.

Usage

Using the .query() method will send the BUS:B<x>:AUDio:BITDelay? query.
Using the .verify(value) method will send the BUS:B<x>:AUDio:BITDelay? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:AUDio:BITDelay value command.

SCPI Syntax

- BUS:B<x>:AUDio:BITDelay <NR1>
- BUS:B<x>:AUDio:BITDelay?

Info

B<x> is the number of the bus.
<NR1> specifies the number of delay bits.

BusBItemAudioBitorder ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:AUDio:BITOrder command.

Description

Specifies the bit order for the AUDIO bus.

Usage

Using the .query() method will send the BUS:B<x>:AUDio:BITOrder? query.
Using the .verify(value) method will send the BUS:B<x>:AUDio:BITOrder? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:AUDio:BITOrder value command.

SCPI Syntax

- BUS:B<x>:AUDio:BITOrder {MSB|LSB}
- BUS:B<x>:AUDio:BITOrder?

Info

B<x> is the number of the bus.
MSB specifies that the most significant bit will be expected first in the order.
LSB specifies that the least significant bit will be expected first in the order.

BusBItemAudioChannel ¶

Bases: SCPICmdRead

The BUS:B<x>:AUDio:CHANnel command tree.

Usage

Using the .query() method will send the BUS:B<x>:AUDio:CHANnel? query.
Using the .verify(value) method will send the BUS:B<x>:AUDio:CHANnel? query and raise an AssertionError if the returned value does not match value.

Properties

.size: The BUS:B<x>:AUDio:CHANnel:SIZe command.

size `property` ¶

size: BusBItemAudioChannelSize

Return the BUS:B<x>:AUDio:CHANnel:SIZe command.

Description

Specifies the number of bits per channel for the AUDIO bus. (To specify the number of bits per word, use BUS:BX:AUDIO:DATA:SIZE).

Usage

Using the .query() method will send the BUS:B<x>:AUDio:CHANnel:SIZe? query.
Using the .verify(value) method will send the BUS:B<x>:AUDio:CHANnel:SIZe? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:AUDio:CHANnel:SIZe value command.

SCPI Syntax

- BUS:B<x>:AUDio:CHANnel:SIZe <NR1>
- BUS:B<x>:AUDio:CHANnel:SIZe?

Info

<NR1> specifies the number of bits per channel.

BusBItemAudioChannelSize ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:AUDio:CHANnel:SIZe command.

Description

Specifies the number of bits per channel for the AUDIO bus. (To specify the number of bits per word, use BUS:BX:AUDIO:DATA:SIZE).

Usage

Using the .query() method will send the BUS:B<x>:AUDio:CHANnel:SIZe? query.
Using the .verify(value) method will send the BUS:B<x>:AUDio:CHANnel:SIZe? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:AUDio:CHANnel:SIZe value command.

SCPI Syntax

- BUS:B<x>:AUDio:CHANnel:SIZe <NR1>
- BUS:B<x>:AUDio:CHANnel:SIZe?

Info

<NR1> specifies the number of bits per channel.

BusBItemAudioClock ¶

Bases: SCPICmdRead

The BUS:B<x>:AUDio:CLOCk command tree.

Usage

Using the .query() method will send the BUS:B<x>:AUDio:CLOCk? query.
Using the .verify(value) method will send the BUS:B<x>:AUDio:CLOCk? query and raise an AssertionError if the returned value does not match value.

Properties

.polarity: The BUS:B<x>:AUDio:CLOCk:POLarity command.
.source: The BUS:B<x>:AUDio:CLOCk:SOUrce command.

polarity `property` ¶

polarity: BusBItemAudioClockPolarity

Return the BUS:B<x>:AUDio:CLOCk:POLarity command.

Description

Specifies the clock polarity for the AUDIO bus.

Usage

Using the .query() method will send the BUS:B<x>:AUDio:CLOCk:POLarity? query.
Using the .verify(value) method will send the BUS:B<x>:AUDio:CLOCk:POLarity? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:AUDio:CLOCk:POLarity value command.

SCPI Syntax

- BUS:B<x>:AUDio:CLOCk:POLarity {FALL|RISe}
- BUS:B<x>:AUDio:CLOCk:POLarity?

Info

FALL sets falling edge as the clock polarity.
RISe sets rising edge as the clock polarity.

source `property` ¶

source: BusBItemAudioClockSource

Return the BUS:B<x>:AUDio:CLOCk:SOUrce command.

Description

Specifies the clock source waveform for the AUDIO bus.

Usage

Using the .query() method will send the BUS:B<x>:AUDio:CLOCk:SOUrce? query.
Using the .verify(value) method will send the BUS:B<x>:AUDio:CLOCk:SOUrce? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:AUDio:CLOCk:SOUrce value command.

SCPI Syntax

- BUS:B<x>:AUDio:CLOCk:SOUrce {CH<x>|D<x>}
- BUS:B<x>:AUDio:CLOCk:SOUrce?

Info

CH<x> specifies an analog channel as the clock source waveform for the audio bus.
D<x> specifies a digital channel as the clock source waveform for the audio bus. (Requires installation of option 3-MSO.).

BusBItemAudioClockPolarity ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:AUDio:CLOCk:POLarity command.

Description

Specifies the clock polarity for the AUDIO bus.

Usage

Using the .query() method will send the BUS:B<x>:AUDio:CLOCk:POLarity? query.
Using the .verify(value) method will send the BUS:B<x>:AUDio:CLOCk:POLarity? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:AUDio:CLOCk:POLarity value command.

SCPI Syntax

- BUS:B<x>:AUDio:CLOCk:POLarity {FALL|RISe}
- BUS:B<x>:AUDio:CLOCk:POLarity?

Info

FALL sets falling edge as the clock polarity.
RISe sets rising edge as the clock polarity.

BusBItemAudioClockSource ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:AUDio:CLOCk:SOUrce command.

Description

Specifies the clock source waveform for the AUDIO bus.

Usage

Using the .query() method will send the BUS:B<x>:AUDio:CLOCk:SOUrce? query.
Using the .verify(value) method will send the BUS:B<x>:AUDio:CLOCk:SOUrce? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:AUDio:CLOCk:SOUrce value command.

SCPI Syntax

- BUS:B<x>:AUDio:CLOCk:SOUrce {CH<x>|D<x>}
- BUS:B<x>:AUDio:CLOCk:SOUrce?

Info

CH<x> specifies an analog channel as the clock source waveform for the audio bus.
D<x> specifies a digital channel as the clock source waveform for the audio bus. (Requires installation of option 3-MSO.).

BusBItemAudioData ¶

Bases: SCPICmdRead

The BUS:B<x>:AUDio:DATa command tree.

Usage

Using the .query() method will send the BUS:B<x>:AUDio:DATa? query.
Using the .verify(value) method will send the BUS:B<x>:AUDio:DATa? query and raise an AssertionError if the returned value does not match value.

Properties

.polarity: The BUS:B<x>:AUDio:DATa:POLarity command.
.size: The BUS:B<x>:AUDio:DATa:SIZe command.
.source: The BUS:B<x>:AUDio:DATa:SOUrce command.

polarity `property` ¶

polarity: BusBItemAudioDataPolarity

Return the BUS:B<x>:AUDio:DATa:POLarity command.

Description

Specifies the data polarity for the AUDIO bus.

Usage

Using the .query() method will send the BUS:B<x>:AUDio:DATa:POLarity? query.
Using the .verify(value) method will send the BUS:B<x>:AUDio:DATa:POLarity? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:AUDio:DATa:POLarity value command.

SCPI Syntax

- BUS:B<x>:AUDio:DATa:POLarity {NORMal|INVERTed}
- BUS:B<x>:AUDio:DATa:POLarity?

Info

NORMal specifies positive data polarity for the audio bus.
INVERTed specifies negative data polarity for the audio bus.

size `property` ¶

size: BusBItemAudioDataSize

Return the BUS:B<x>:AUDio:DATa:SIZe command.

Description

Specifies the number of bits per word for the AUDIO bus.

Usage

Using the .query() method will send the BUS:B<x>:AUDio:DATa:SIZe? query.
Using the .verify(value) method will send the BUS:B<x>:AUDio:DATa:SIZe? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:AUDio:DATa:SIZe value command.

SCPI Syntax

- BUS:B<x>:AUDio:DATa:SIZe <NR1>
- BUS:B<x>:AUDio:DATa:SIZe?

Info

B<x> is the number of the bus.
<NR1> specifies the number of bits per word.

source `property` ¶

source: BusBItemAudioDataSource

Return the BUS:B<x>:AUDio:DATa:SOUrce command.

Description

Specifies the data source waveform for the AUDIO bus.

Usage

Using the .query() method will send the BUS:B<x>:AUDio:DATa:SOUrce? query.
Using the .verify(value) method will send the BUS:B<x>:AUDio:DATa:SOUrce? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:AUDio:DATa:SOUrce value command.

SCPI Syntax

- BUS:B<x>:AUDio:DATa:SOUrce {CH<x>|D<x>}
- BUS:B<x>:AUDio:DATa:SOUrce?

Info

CH<x> specifies an analog channel as the data source waveform for the audio bus.
D<x> specifies a digital channel as the data source waveform for the audio bus. (Requires option 3-MSO.).

BusBItemAudioDataPolarity ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:AUDio:DATa:POLarity command.

Description

Specifies the data polarity for the AUDIO bus.

Usage

Using the .query() method will send the BUS:B<x>:AUDio:DATa:POLarity? query.
Using the .verify(value) method will send the BUS:B<x>:AUDio:DATa:POLarity? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:AUDio:DATa:POLarity value command.

SCPI Syntax

- BUS:B<x>:AUDio:DATa:POLarity {NORMal|INVERTed}
- BUS:B<x>:AUDio:DATa:POLarity?

Info

NORMal specifies positive data polarity for the audio bus.
INVERTed specifies negative data polarity for the audio bus.

BusBItemAudioDataSize ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:AUDio:DATa:SIZe command.

Description

Specifies the number of bits per word for the AUDIO bus.

Usage

Using the .query() method will send the BUS:B<x>:AUDio:DATa:SIZe? query.
Using the .verify(value) method will send the BUS:B<x>:AUDio:DATa:SIZe? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:AUDio:DATa:SIZe value command.

SCPI Syntax

- BUS:B<x>:AUDio:DATa:SIZe <NR1>
- BUS:B<x>:AUDio:DATa:SIZe?

Info

B<x> is the number of the bus.
<NR1> specifies the number of bits per word.

BusBItemAudioDataSource ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:AUDio:DATa:SOUrce command.

Description

Specifies the data source waveform for the AUDIO bus.

Usage

Using the .query() method will send the BUS:B<x>:AUDio:DATa:SOUrce? query.
Using the .verify(value) method will send the BUS:B<x>:AUDio:DATa:SOUrce? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:AUDio:DATa:SOUrce value command.

SCPI Syntax

- BUS:B<x>:AUDio:DATa:SOUrce {CH<x>|D<x>}
- BUS:B<x>:AUDio:DATa:SOUrce?

Info

CH<x> specifies an analog channel as the data source waveform for the audio bus.
D<x> specifies a digital channel as the data source waveform for the audio bus. (Requires option 3-MSO.).

BusBItemAudioDisplay ¶

Bases: SCPICmdRead

The BUS:B<x>:AUDio:DISplay command tree.

Usage

Using the .query() method will send the BUS:B<x>:AUDio:DISplay? query.
Using the .verify(value) method will send the BUS:B<x>:AUDio:DISplay? query and raise an AssertionError if the returned value does not match value.

Properties

.format: The BUS:B<x>:AUDio:DISplay:FORMat command.

format `property` ¶

format: BusBItemAudioDisplayFormat

Return the BUS:B<x>:AUDio:DISplay:FORMat command.

Description

Specifies the display format for the AUDIO bus.

Usage

Using the .query() method will send the BUS:B<x>:AUDio:DISplay:FORMat? query.
Using the .verify(value) method will send the BUS:B<x>:AUDio:DISplay:FORMat? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:AUDio:DISplay:FORMat value command.

SCPI Syntax

- BUS:B<x>:AUDio:DISplay:FORMat {BINary|HEXadecimal|SIGNEDDECimal}
- BUS:B<x>:AUDio:DISplay:FORMat?

Info

BINary specifies a binary data display.
HEXadecimal specifies a hexadecimal data display.
SIGNEDDECimal specifies a signed decimal data display.

BusBItemAudioDisplayFormat ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:AUDio:DISplay:FORMat command.

Description

Specifies the display format for the AUDIO bus.

Usage

Using the .query() method will send the BUS:B<x>:AUDio:DISplay:FORMat? query.
Using the .verify(value) method will send the BUS:B<x>:AUDio:DISplay:FORMat? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:AUDio:DISplay:FORMat value command.

SCPI Syntax

- BUS:B<x>:AUDio:DISplay:FORMat {BINary|HEXadecimal|SIGNEDDECimal}
- BUS:B<x>:AUDio:DISplay:FORMat?

Info

BINary specifies a binary data display.
HEXadecimal specifies a hexadecimal data display.
SIGNEDDECimal specifies a signed decimal data display.

BusBItemAudioFrame ¶

Bases: SCPICmdRead

The BUS:B<x>:AUDio:FRAME command tree.

Usage

Using the .query() method will send the BUS:B<x>:AUDio:FRAME? query.
Using the .verify(value) method will send the BUS:B<x>:AUDio:FRAME? query and raise an AssertionError if the returned value does not match value.

Info

B<x> is the number of the bus.

Properties

.size: The BUS:B<x>:AUDio:FRAME:SIZe command.

size `property` ¶

size: BusBItemAudioFrameSize

Return the BUS:B<x>:AUDio:FRAME:SIZe command.

Description

Specifies the number of channels in each frame for the AUDIO bus.

Usage

Using the .query() method will send the BUS:B<x>:AUDio:FRAME:SIZe? query.
Using the .verify(value) method will send the BUS:B<x>:AUDio:FRAME:SIZe? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:AUDio:FRAME:SIZe value command.

SCPI Syntax

- BUS:B<x>:AUDio:FRAME:SIZe <NR1>
- BUS:B<x>:AUDio:FRAME:SIZe?

Info

B<x> is the number of the bus.
<NR1> specifies the number of channels in each frame.

BusBItemAudioFrameSize ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:AUDio:FRAME:SIZe command.

Description

Specifies the number of channels in each frame for the AUDIO bus.

Usage

Using the .query() method will send the BUS:B<x>:AUDio:FRAME:SIZe? query.
Using the .verify(value) method will send the BUS:B<x>:AUDio:FRAME:SIZe? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:AUDio:FRAME:SIZe value command.

SCPI Syntax

- BUS:B<x>:AUDio:FRAME:SIZe <NR1>
- BUS:B<x>:AUDio:FRAME:SIZe?

Info

B<x> is the number of the bus.
<NR1> specifies the number of channels in each frame.

BusBItemAudioFramesync ¶

Bases: SCPICmdRead

The BUS:B<x>:AUDio:FRAMESync command tree.

Usage

Using the .query() method will send the BUS:B<x>:AUDio:FRAMESync? query.
Using the .verify(value) method will send the BUS:B<x>:AUDio:FRAMESync? query and raise an AssertionError if the returned value does not match value.

Properties

.polarity: The BUS:B<x>:AUDio:FRAMESync:POLarity command.
.source: The BUS:B<x>:AUDio:FRAMESync:SOUrce command.

polarity `property` ¶

polarity: BusBItemAudioFramesyncPolarity

Return the BUS:B<x>:AUDio:FRAMESync:POLarity command.

Description

Specifies the frame sync polarity for the AUDIO bus - falling or rising edge.

Usage

Using the .query() method will send the BUS:B<x>:AUDio:FRAMESync:POLarity? query.
Using the .verify(value) method will send the BUS:B<x>:AUDio:FRAMESync:POLarity? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:AUDio:FRAMESync:POLarity value command.

SCPI Syntax

- BUS:B<x>:AUDio:FRAMESync:POLarity {FALL|RISe}
- BUS:B<x>:AUDio:FRAMESync:POLarity?

Info

FALL specifies the falling edge as the frame sync polarity.
RISe specifies the rising edge as the frame sync polarity.

source `property` ¶

source: BusBItemAudioFramesyncSource

Return the BUS:B<x>:AUDio:FRAMESync:SOUrce command.

Description

Specifies the frame sync source waveform for the AUDIO bus.

Usage

Using the .query() method will send the BUS:B<x>:AUDio:FRAMESync:SOUrce? query.
Using the .verify(value) method will send the BUS:B<x>:AUDio:FRAMESync:SOUrce? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:AUDio:FRAMESync:SOUrce value command.

SCPI Syntax

- BUS:B<x>:AUDio:FRAMESync:SOUrce {CH<x>|D<x>}
- BUS:B<x>:AUDio:FRAMESync:SOUrce?

Info

CH<x> specifies an analog channel as the frame sync source waveform.
D<x> specifies a digital channel as the frame sync source waveform. (Requires option 3-MSO.).

BusBItemAudioFramesyncPolarity ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:AUDio:FRAMESync:POLarity command.

Description

Specifies the frame sync polarity for the AUDIO bus - falling or rising edge.

Usage

Using the .query() method will send the BUS:B<x>:AUDio:FRAMESync:POLarity? query.
Using the .verify(value) method will send the BUS:B<x>:AUDio:FRAMESync:POLarity? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:AUDio:FRAMESync:POLarity value command.

SCPI Syntax

- BUS:B<x>:AUDio:FRAMESync:POLarity {FALL|RISe}
- BUS:B<x>:AUDio:FRAMESync:POLarity?

Info

FALL specifies the falling edge as the frame sync polarity.
RISe specifies the rising edge as the frame sync polarity.

BusBItemAudioFramesyncSource ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:AUDio:FRAMESync:SOUrce command.

Description

Specifies the frame sync source waveform for the AUDIO bus.

Usage

Using the .query() method will send the BUS:B<x>:AUDio:FRAMESync:SOUrce? query.
Using the .verify(value) method will send the BUS:B<x>:AUDio:FRAMESync:SOUrce? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:AUDio:FRAMESync:SOUrce value command.

SCPI Syntax

- BUS:B<x>:AUDio:FRAMESync:SOUrce {CH<x>|D<x>}
- BUS:B<x>:AUDio:FRAMESync:SOUrce?

Info

CH<x> specifies an analog channel as the frame sync source waveform.
D<x> specifies a digital channel as the frame sync source waveform. (Requires option 3-MSO.).

BusBItemAudioType ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:AUDio:TYPe command.

Description

Specifies the audio format (type) for the AUDIO bus.

Usage

Using the .query() method will send the BUS:B<x>:AUDio:TYPe? query.
Using the .verify(value) method will send the BUS:B<x>:AUDio:TYPe? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:AUDio:TYPe value command.

SCPI Syntax

- BUS:B<x>:AUDio:TYPe {I2S|LJ|RJ|TDM}
- BUS:B<x>:AUDio:TYPe?

Info

B<x> is the number of the bus.
I2S specifies the I2S audio format.
LJ specifies the left-justified audio format.
RJ specifies the right-justified audio format.
TDM specifies the time-division multiplexing audio format.

BusBItemAudioWordsel ¶

Bases: SCPICmdRead

The BUS:B<x>:AUDio:WORDSel command tree.

Usage

Using the .query() method will send the BUS:B<x>:AUDio:WORDSel? query.
Using the .verify(value) method will send the BUS:B<x>:AUDio:WORDSel? query and raise an AssertionError if the returned value does not match value.

Info

B<x> is the number of the bus.

Properties

.polarity: The BUS:B<x>:AUDio:WORDSel:POLarity command.
.source: The BUS:B<x>:AUDio:WORDSel:SOUrce command.

polarity `property` ¶

polarity: BusBItemAudioWordselPolarity

Return the BUS:B<x>:AUDio:WORDSel:POLarity command.

Description

Specifies the word select polarity for the AUDIO bus.

Usage

Using the .query() method will send the BUS:B<x>:AUDio:WORDSel:POLarity? query.
Using the .verify(value) method will send the BUS:B<x>:AUDio:WORDSel:POLarity? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:AUDio:WORDSel:POLarity value command.

SCPI Syntax

- BUS:B<x>:AUDio:WORDSel:POLarity {NORMal|INVERTed}
- BUS:B<x>:AUDio:WORDSel:POLarity?

Info

B<x> is the number of the bus.
NORMal specifies positive WORDSel polarity.
INVERTed specifies negative WORDSel polarity.

source `property` ¶

source: BusBItemAudioWordselSource

Return the BUS:B<x>:AUDio:WORDSel:SOUrce command.

Description

Specifies the word select source waveform for the AUDIO bus.

Usage

Using the .query() method will send the BUS:B<x>:AUDio:WORDSel:SOUrce? query.
Using the .verify(value) method will send the BUS:B<x>:AUDio:WORDSel:SOUrce? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:AUDio:WORDSel:SOUrce value command.

SCPI Syntax

- BUS:B<x>:AUDio:WORDSel:SOUrce {CH<x>|D<x>}
- BUS:B<x>:AUDio:WORDSel:SOUrce?

Info

CH<x> specifies an analog channel as the word select source waveform .
D<x> specifies a digital channel as the word select source waveform. (Requires option 3-MSO.).

BusBItemAudioWordselPolarity ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:AUDio:WORDSel:POLarity command.

Description

Specifies the word select polarity for the AUDIO bus.

Usage

Using the .query() method will send the BUS:B<x>:AUDio:WORDSel:POLarity? query.
Using the .verify(value) method will send the BUS:B<x>:AUDio:WORDSel:POLarity? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:AUDio:WORDSel:POLarity value command.

SCPI Syntax

- BUS:B<x>:AUDio:WORDSel:POLarity {NORMal|INVERTed}
- BUS:B<x>:AUDio:WORDSel:POLarity?

Info

B<x> is the number of the bus.
NORMal specifies positive WORDSel polarity.
INVERTed specifies negative WORDSel polarity.

BusBItemAudioWordselSource ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:AUDio:WORDSel:SOUrce command.

Description

Specifies the word select source waveform for the AUDIO bus.

Usage

Using the .query() method will send the BUS:B<x>:AUDio:WORDSel:SOUrce? query.
Using the .verify(value) method will send the BUS:B<x>:AUDio:WORDSel:SOUrce? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:AUDio:WORDSel:SOUrce value command.

SCPI Syntax

- BUS:B<x>:AUDio:WORDSel:SOUrce {CH<x>|D<x>}
- BUS:B<x>:AUDio:WORDSel:SOUrce?

Info

CH<x> specifies an analog channel as the word select source waveform .
D<x> specifies a digital channel as the word select source waveform. (Requires option 3-MSO.).

BusBItemCan ¶

Bases: SCPICmdRead

The BUS:B<x>:CAN command tree.

Usage

Using the .query() method will send the BUS:B<x>:CAN? query.
Using the .verify(value) method will send the BUS:B<x>:CAN? query and raise an AssertionError if the returned value does not match value.

Properties

.bitrate: The BUS:B<x>:CAN:BITRate command.
.fd: The BUS:B<x>:CAN:FD command tree.
.probe: The BUS:B<x>:CAN:PRObe command.
.samplepoint: The BUS:B<x>:CAN:SAMPLEpoint command.
.source: The BUS:B<x>:CAN:SOUrce command.
.standard: The BUS:B<x>:CAN:STANDard command.

bitrate `property` ¶

bitrate: BusBItemCanBitrate

Return the BUS:B<x>:CAN:BITRate command.

Description

Specifies the bit rate for the CAN bus.

Usage

Using the .query() method will send the BUS:B<x>:CAN:BITRate? query.
Using the .verify(value) method will send the BUS:B<x>:CAN:BITRate? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:CAN:BITRate value command.

SCPI Syntax

- BUS:B<x>:CAN:BITRate <NR1>
- BUS:B<x>:CAN:BITRate?

Info

<NR1> is the bit rate. The instrument supports bit rates at 10 bps intervals. You can enter any positive integer, and the instrument will coerce the value to the closest supported bit rate.

fd `property` ¶

fd: BusBItemCanFd

Return the BUS:B<x>:CAN:FD command tree.

Usage

Using the .query() method will send the BUS:B<x>:CAN:FD? query.
Using the .verify(value) method will send the BUS:B<x>:CAN:FD? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.bitrate: The BUS:B<x>:CAN:FD:BITRate command.
.standard: The BUS:B<x>:CAN:FD:STANDard command.

probe `property` ¶

probe: BusBItemCanProbe

Return the BUS:B<x>:CAN:PRObe command.

Description

Specifies the probing method for the CAN bus.

Usage

Using the .query() method will send the BUS:B<x>:CAN:PRObe? query.
Using the .verify(value) method will send the BUS:B<x>:CAN:PRObe? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:CAN:PRObe value command.

SCPI Syntax

- BUS:B<x>:CAN:PRObe {CANH|CANL|RX|TX|DIFFerential}
- BUS:B<x>:CAN:PRObe?

Info

CANH specifies the single-ended CANH signal, as specified by the CAN standard.
CANL specifies the single-ended CANL signal, as specified by the CAN standard.
RX specifies the receive signal on the bus side of the CAN transceiver.
TX specifies the transmit signal.
DIFFerential specifies the differential CAN signal.

samplepoint `property` ¶

samplepoint: BusBItemCanSamplepoint

Return the BUS:B<x>:CAN:SAMPLEpoint command.

Description

This command sets or queries the sample point for the specified CAN bus. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:CAN:SAMPLEpoint? query.
Using the .verify(value) method will send the BUS:B<x>:CAN:SAMPLEpoint? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:CAN:SAMPLEpoint value command.

SCPI Syntax

- BUS:B<x>:CAN:SAMPLEpoint <NR1>
- BUS:B<x>:CAN:SAMPLEpoint?

Info

B<x> is the number of the bus.
<NR1> is the sample point, in percent, for the specified CAN bus.

source `property` ¶

source: BusBItemCanSource

Return the BUS:B<x>:CAN:SOUrce command.

Description

Specifies the CAN bus data source.

Usage

Using the .query() method will send the BUS:B<x>:CAN:SOUrce? query.
Using the .verify(value) method will send the BUS:B<x>:CAN:SOUrce? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:CAN:SOUrce value command.

SCPI Syntax

- BUS:B<x>:CAN:SOUrce {CH<x>|D<x>}
- BUS:B<x>:CAN:SOUrce?

Info

CH<x> specifies an analog channel as the data source waveform.
D<x> specifies a digital channel as the data source waveform. (Requires installation of option 3-MSO.).

standard `property` ¶

standard: BusBItemCanStandard

Return the BUS:B<x>:CAN:STANDard command.

Description

Specifies the CAN bus standard to use.

Usage

Using the .query() method will send the BUS:B<x>:CAN:STANDard? query.
Using the .verify(value) method will send the BUS:B<x>:CAN:STANDard? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:CAN:STANDard value command.

SCPI Syntax

- BUS:B<x>:CAN:STANDard {CAN2X|CANFD} string
- BUS:B<x>:CAN:STANDard?

Info

CAN2X sets the CAN bus standard to CAN 2.0.
CANFD sets the CAN bus standard to CAN FD.

BusBItemCanBitrate ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:CAN:BITRate command.

Description

Specifies the bit rate for the CAN bus.

Usage

Using the .query() method will send the BUS:B<x>:CAN:BITRate? query.
Using the .verify(value) method will send the BUS:B<x>:CAN:BITRate? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:CAN:BITRate value command.

SCPI Syntax

- BUS:B<x>:CAN:BITRate <NR1>
- BUS:B<x>:CAN:BITRate?

Info

<NR1> is the bit rate. The instrument supports bit rates at 10 bps intervals. You can enter any positive integer, and the instrument will coerce the value to the closest supported bit rate.

BusBItemCanFd ¶

Bases: SCPICmdRead

The BUS:B<x>:CAN:FD command tree.

Usage

Using the .query() method will send the BUS:B<x>:CAN:FD? query.
Using the .verify(value) method will send the BUS:B<x>:CAN:FD? query and raise an AssertionError if the returned value does not match value.

Properties

.bitrate: The BUS:B<x>:CAN:FD:BITRate command.
.standard: The BUS:B<x>:CAN:FD:STANDard command.

bitrate `property` ¶

bitrate: BusBItemCanFdBitrate

Return the BUS:B<x>:CAN:FD:BITRate command.

Description

Specifies the FD bit rate for the CAN bus. This is the bitrate used for CAN FD frames transmitted with increased data phase rates. The maximum bitrate is 10 Mbps.

Usage

Using the .query() method will send the BUS:B<x>:CAN:FD:BITRate? query.
Using the .verify(value) method will send the BUS:B<x>:CAN:FD:BITRate? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:CAN:FD:BITRate value command.

SCPI Syntax

- BUS:B<x>:CAN:FD:BITRate <NR1>
- BUS:B<x>:CAN:FD:BITRate?

Info

<NR1> is the FD bit rate. The instrument supports bit rates at 100 bps intervals. You can enter any positive integer, and the instrument will coerce the value to the closest supported bit rate.

standard `property` ¶

standard: BusBItemCanFdStandard

Return the BUS:B<x>:CAN:FD:STANDard command.

Description

Specifies the CAN FD standard to use.

Usage

Using the .query() method will send the BUS:B<x>:CAN:FD:STANDard? query.
Using the .verify(value) method will send the BUS:B<x>:CAN:FD:STANDard? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:CAN:FD:STANDard value command.

SCPI Syntax

- BUS:B<x>:CAN:FD:STANDard {ISO | NONISO} string
- BUS:B<x>:CAN:FD:STANDard?

Info

ISO sets the CAN FD standard to ISO CAN FD (11898-1:2015).
NONISO sets the CAN FD standard to non-ISO CAN FD (Bosch:2012).

BusBItemCanFdBitrate ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:CAN:FD:BITRate command.

Description

Specifies the FD bit rate for the CAN bus. This is the bitrate used for CAN FD frames transmitted with increased data phase rates. The maximum bitrate is 10 Mbps.

Usage

Using the .query() method will send the BUS:B<x>:CAN:FD:BITRate? query.
Using the .verify(value) method will send the BUS:B<x>:CAN:FD:BITRate? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:CAN:FD:BITRate value command.

SCPI Syntax

- BUS:B<x>:CAN:FD:BITRate <NR1>
- BUS:B<x>:CAN:FD:BITRate?

Info

<NR1> is the FD bit rate. The instrument supports bit rates at 100 bps intervals. You can enter any positive integer, and the instrument will coerce the value to the closest supported bit rate.

BusBItemCanFdStandard ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:CAN:FD:STANDard command.

Description

Specifies the CAN FD standard to use.

Usage

Using the .query() method will send the BUS:B<x>:CAN:FD:STANDard? query.
Using the .verify(value) method will send the BUS:B<x>:CAN:FD:STANDard? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:CAN:FD:STANDard value command.

SCPI Syntax

- BUS:B<x>:CAN:FD:STANDard {ISO | NONISO} string
- BUS:B<x>:CAN:FD:STANDard?

Info

ISO sets the CAN FD standard to ISO CAN FD (11898-1:2015).
NONISO sets the CAN FD standard to non-ISO CAN FD (Bosch:2012).

BusBItemCanProbe ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:CAN:PRObe command.

Description

Specifies the probing method for the CAN bus.

Usage

Using the .query() method will send the BUS:B<x>:CAN:PRObe? query.
Using the .verify(value) method will send the BUS:B<x>:CAN:PRObe? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:CAN:PRObe value command.

SCPI Syntax

- BUS:B<x>:CAN:PRObe {CANH|CANL|RX|TX|DIFFerential}
- BUS:B<x>:CAN:PRObe?

Info

CANH specifies the single-ended CANH signal, as specified by the CAN standard.
CANL specifies the single-ended CANL signal, as specified by the CAN standard.
RX specifies the receive signal on the bus side of the CAN transceiver.
TX specifies the transmit signal.
DIFFerential specifies the differential CAN signal.

BusBItemCanSamplepoint ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:CAN:SAMPLEpoint command.

Description

This command sets or queries the sample point for the specified CAN bus. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:CAN:SAMPLEpoint? query.
Using the .verify(value) method will send the BUS:B<x>:CAN:SAMPLEpoint? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:CAN:SAMPLEpoint value command.

SCPI Syntax

- BUS:B<x>:CAN:SAMPLEpoint <NR1>
- BUS:B<x>:CAN:SAMPLEpoint?

Info

B<x> is the number of the bus.
<NR1> is the sample point, in percent, for the specified CAN bus.

BusBItemCanSource ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:CAN:SOUrce command.

Description

Specifies the CAN bus data source.

Usage

Using the .query() method will send the BUS:B<x>:CAN:SOUrce? query.
Using the .verify(value) method will send the BUS:B<x>:CAN:SOUrce? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:CAN:SOUrce value command.

SCPI Syntax

- BUS:B<x>:CAN:SOUrce {CH<x>|D<x>}
- BUS:B<x>:CAN:SOUrce?

Info

CH<x> specifies an analog channel as the data source waveform.
D<x> specifies a digital channel as the data source waveform. (Requires installation of option 3-MSO.).

BusBItemCanStandard ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:CAN:STANDard command.

Description

Specifies the CAN bus standard to use.

Usage

Using the .query() method will send the BUS:B<x>:CAN:STANDard? query.
Using the .verify(value) method will send the BUS:B<x>:CAN:STANDard? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:CAN:STANDard value command.

SCPI Syntax

- BUS:B<x>:CAN:STANDard {CAN2X|CANFD} string
- BUS:B<x>:CAN:STANDard?

Info

CAN2X sets the CAN bus standard to CAN 2.0.
CANFD sets the CAN bus standard to CAN FD.

BusBItemDisplay ¶

Bases: SCPICmdRead

The BUS:B<x>:DISplay command tree.

Usage

Using the .query() method will send the BUS:B<x>:DISplay? query.
Using the .verify(value) method will send the BUS:B<x>:DISplay? query and raise an AssertionError if the returned value does not match value.

Properties

.format: The BUS:B<x>:DISplay:FORMat command.
.type: The BUS:B<x>:DISplay:TYPe command.

format `property` ¶

format: BusBItemDisplayFormat

Return the BUS:B<x>:DISplay:FORMat command.

Description

Specifies the display format for the numerical information in the bus waveform. The display formats supported depend on the BUS:BX:TYPE. Supported display formats Bus type Display format Audio BINary | HEXadecimal | ASCII | SIGNEDDECimal CAN BINary | HEXadecimal | MIXed Ethernet BINary | HEXadecimal | ASCII | MIXed FlexRay BINary | HEXadecimal | MIXed I 2 C BINary | HEXadecimal LIN BINary | HEXadecimal | MiXed MIL-STD-1553 BINary | HEXadecimal | ASCII|MIXed|BLOCKHEX Parallel BINary | HEXadecimal RS232C BINary | HEXadecimal | ASCII SPI BINary | HEXadecimal USB BINary | HEXadecimal | MIXed | MIXED2 SIGNEDDECimal is set using the audio application BUS:BX:AUDIO:DISPLAY:FORMAT command.

Usage

Using the .query() method will send the BUS:B<x>:DISplay:FORMat? query.
Using the .verify(value) method will send the BUS:B<x>:DISplay:FORMat? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:DISplay:FORMat value command.

SCPI Syntax

- BUS:B<x>:DISplay:FORMat {BINary|HEXadecimal|ASCII|MIXed|MIXED2|BLOCKHEX}
- BUS:B<x>:DISplay:FORMat?

Info

BINary - All values are displayed in binary.
HEXadecimal - All values are displayed in hexadecimal.
ASCII - All values are displayed in an ASCII format, for RS-232 only.
MIXed - Values are displayed in a mixture of hexadecimal, binary, and decimal, depending on the field.
MIXED2 - Values are displayed in a mixture of hexadecimal, binary, decimal and ASCII, depending on the field.
BLOCKHEX - Displays the 16-bits of each payload as a block of 4 hexadecimal digits.

type `property` ¶

type: BusBItemDisplayType

Return the BUS:B<x>:DISplay:TYPe command.

Description

Specifies the display type for bus. You can set up the bus to display the protocol information, the logic waveforms that comprise the bus, or both.

Usage

Using the .query() method will send the BUS:B<x>:DISplay:TYPe? query.
Using the .verify(value) method will send the BUS:B<x>:DISplay:TYPe? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:DISplay:TYPe value command.

SCPI Syntax

- BUS:B<x>:DISplay:TYPe {BUS|BOTh}
- BUS:B<x>:DISplay:TYPe?

Info

BUS displays the bus waveforms only.
BOTh displays both the bus and logic waveforms.

BusBItemDisplayFormat ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:DISplay:FORMat command.

Description

Specifies the display format for the numerical information in the bus waveform. The display formats supported depend on the BUS:BX:TYPE. Supported display formats Bus type Display format Audio BINary | HEXadecimal | ASCII | SIGNEDDECimal CAN BINary | HEXadecimal | MIXed Ethernet BINary | HEXadecimal | ASCII | MIXed FlexRay BINary | HEXadecimal | MIXed I 2 C BINary | HEXadecimal LIN BINary | HEXadecimal | MiXed MIL-STD-1553 BINary | HEXadecimal | ASCII|MIXed|BLOCKHEX Parallel BINary | HEXadecimal RS232C BINary | HEXadecimal | ASCII SPI BINary | HEXadecimal USB BINary | HEXadecimal | MIXed | MIXED2 SIGNEDDECimal is set using the audio application BUS:BX:AUDIO:DISPLAY:FORMAT command.

Usage

Using the .query() method will send the BUS:B<x>:DISplay:FORMat? query.
Using the .verify(value) method will send the BUS:B<x>:DISplay:FORMat? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:DISplay:FORMat value command.

SCPI Syntax

- BUS:B<x>:DISplay:FORMat {BINary|HEXadecimal|ASCII|MIXed|MIXED2|BLOCKHEX}
- BUS:B<x>:DISplay:FORMat?

Info

BINary - All values are displayed in binary.
HEXadecimal - All values are displayed in hexadecimal.
ASCII - All values are displayed in an ASCII format, for RS-232 only.
MIXed - Values are displayed in a mixture of hexadecimal, binary, and decimal, depending on the field.
MIXED2 - Values are displayed in a mixture of hexadecimal, binary, decimal and ASCII, depending on the field.
BLOCKHEX - Displays the 16-bits of each payload as a block of 4 hexadecimal digits.

BusBItemDisplayType ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:DISplay:TYPe command.

Description

Specifies the display type for bus. You can set up the bus to display the protocol information, the logic waveforms that comprise the bus, or both.

Usage

Using the .query() method will send the BUS:B<x>:DISplay:TYPe? query.
Using the .verify(value) method will send the BUS:B<x>:DISplay:TYPe? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:DISplay:TYPe value command.

SCPI Syntax

- BUS:B<x>:DISplay:TYPe {BUS|BOTh}
- BUS:B<x>:DISplay:TYPe?

Info

BUS displays the bus waveforms only.
BOTh displays both the bus and logic waveforms.

BusBItemEthernet ¶

Bases: SCPICmdRead

The BUS:B<x>:ETHERnet command tree.

Usage

Using the .query() method will send the BUS:B<x>:ETHERnet? query.
Using the .verify(value) method will send the BUS:B<x>:ETHERnet? query and raise an AssertionError if the returned value does not match value.

Properties

.protocol: The BUS:B<x>:ETHERnet:PROTOcol command.
.probe: The BUS:B<x>:ETHERnet:PRObe command.
.source: The BUS:B<x>:ETHERnet:SOUrce command tree.
.type: The BUS:B<x>:ETHERnet:TYPe command.

probe `property` ¶

probe: BusBItemEthernetProbe

Return the BUS:B<x>:ETHERnet:PRObe command.

Description

This command specifies the Ethernet probe type: differential or single-ended. The default is DIFFerential. B is the bus number.

Usage

Using the .query() method will send the BUS:B<x>:ETHERnet:PRObe? query.
Using the .verify(value) method will send the BUS:B<x>:ETHERnet:PRObe? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:ETHERnet:PRObe value command.

SCPI Syntax

- BUS:B<x>:ETHERnet:PRObe {DIFFerential|SINGleended}
- BUS:B<x>:ETHERnet:PRObe?

Info

DIFFerential
SINGleended

protocol `property` ¶

protocol: BusBItemEthernetProtocol

Return the BUS:B<x>:ETHERnet:PROTOcol command.

Description

Use this command to set the Ethernet protocol type to TCP/IPv4, or to OTHER. The default is IPV4.

Usage

Using the .query() method will send the BUS:B<x>:ETHERnet:PROTOcol? query.
Using the .verify(value) method will send the BUS:B<x>:ETHERnet:PROTOcol? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:ETHERnet:PROTOcol value command.

SCPI Syntax

- BUS:B<x>:ETHERnet:PROTOcol {IPv4|OTHER}
- BUS:B<x>:ETHERnet:PROTOcol?

Info

IPv4 sets the Ethernet protocol type to Internet Protocol version 4.
OTHER sets the Ethernet protocol type to other than IPv4.

source `property` ¶

source: BusBItemEthernetSource

Return the BUS:B<x>:ETHERnet:SOUrce command tree.

Usage

Using the .query() method will send the BUS:B<x>:ETHERnet:SOUrce? query.
Using the .verify(value) method will send the BUS:B<x>:ETHERnet:SOUrce? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.differential: The BUS:B<x>:ETHERnet:SOUrce:DIFFerential command.
.dminus: The BUS:B<x>:ETHERnet:SOUrce:DMINus command.

type `property` ¶

type: BusBItemEthernetType

Return the BUS:B<x>:ETHERnet:TYPe command.

Description

This command specifies the Ethernet standard type: 10Base-T or 100Base-T. The default is ENET 100 BASETX.

Usage

Using the .query() method will send the BUS:B<x>:ETHERnet:TYPe? query.
Using the .verify(value) method will send the BUS:B<x>:ETHERnet:TYPe? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:ETHERnet:TYPe value command.

SCPI Syntax

- BUS:B<x>:ETHERnet:TYPe {ENET10BASET|ENET100BASETX}
- BUS:B<x>:ETHERnet:TYPe?

Info

ENET10BASET specifies the Ethernet type as 10Base-T standard. This standard supports data transfer rates up to 10 Mbps (also called Twisted Pair Ethernet).
ENET100BASETX specifies the Ethernet type as 100Base-T standard. This standard supports data transfer rates up to 100 Mbps (also called Fast Ethernet).

BusBItemEthernetProbe ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:ETHERnet:PRObe command.

Description

This command specifies the Ethernet probe type: differential or single-ended. The default is DIFFerential. B is the bus number.

Usage

Using the .query() method will send the BUS:B<x>:ETHERnet:PRObe? query.
Using the .verify(value) method will send the BUS:B<x>:ETHERnet:PRObe? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:ETHERnet:PRObe value command.

SCPI Syntax

- BUS:B<x>:ETHERnet:PRObe {DIFFerential|SINGleended}
- BUS:B<x>:ETHERnet:PRObe?

Info

DIFFerential
SINGleended

BusBItemEthernetProtocol ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:ETHERnet:PROTOcol command.

Description

Use this command to set the Ethernet protocol type to TCP/IPv4, or to OTHER. The default is IPV4.

Usage

Using the .query() method will send the BUS:B<x>:ETHERnet:PROTOcol? query.
Using the .verify(value) method will send the BUS:B<x>:ETHERnet:PROTOcol? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:ETHERnet:PROTOcol value command.

SCPI Syntax

- BUS:B<x>:ETHERnet:PROTOcol {IPv4|OTHER}
- BUS:B<x>:ETHERnet:PROTOcol?

Info

IPv4 sets the Ethernet protocol type to Internet Protocol version 4.
OTHER sets the Ethernet protocol type to other than IPv4.

BusBItemEthernetSource ¶

Bases: SCPICmdRead

The BUS:B<x>:ETHERnet:SOUrce command tree.

Usage

Using the .query() method will send the BUS:B<x>:ETHERnet:SOUrce? query.
Using the .verify(value) method will send the BUS:B<x>:ETHERnet:SOUrce? query and raise an AssertionError if the returned value does not match value.

Properties

.differential: The BUS:B<x>:ETHERnet:SOUrce:DIFFerential command.
.dminus: The BUS:B<x>:ETHERnet:SOUrce:DMINus command.

differential `property` ¶

differential: BusBItemEthernetSourceDifferential

Return the BUS:B<x>:ETHERnet:SOUrce:DIFFerential command.

Description

This command specifies the Ethernet data source for differential input. The supported source waveforms are channels 1-4, math waveform, and reference waveforms 1-4. The default is channel 1.

Usage

Using the .query() method will send the BUS:B<x>:ETHERnet:SOUrce:DIFFerential? query.
Using the .verify(value) method will send the BUS:B<x>:ETHERnet:SOUrce:DIFFerential? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:ETHERnet:SOUrce:DIFFerential value command.

SCPI Syntax

- BUS:B<x>:ETHERnet:SOUrce:DIFFerential {CH<x>|MATH|REF<x>}
- BUS:B<x>:ETHERnet:SOUrce:DIFFerential?

Info

CH<x> specifies to use one of the channels 1-4 as the Ethernet data source for differential input.
MATH specifies to use the math waveform as the source for Ethernet data differential input.
REF<x> specifies to use one of the reference waveforms 1-4 as the source for Ethernet data differential input.

dminus `property` ¶

dminus: BusBItemEthernetSourceDminus

Return the BUS:B<x>:ETHERnet:SOUrce:DMINus command.

Description

This command specifies the Ethernet data source for D- input for single-ended probing. The default is Channel 2.

Usage

Using the .query() method will send the BUS:B<x>:ETHERnet:SOUrce:DMINus? query.
Using the .verify(value) method will send the BUS:B<x>:ETHERnet:SOUrce:DMINus? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:ETHERnet:SOUrce:DMINus value command.

SCPI Syntax

- BUS:B<x>:ETHERnet:SOUrce:DMINus {CH<x>|D<x>}
- BUS:B<x>:ETHERnet:SOUrce:DMINus?

Info

CH<x> specifies to use one of the analog channels as the Ethernet data source for the D- input.
D<x> specifies to use one of the digital channels D0 - D15 as the Ethernet data source for the D- input.

BusBItemEthernetSourceDifferential ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:ETHERnet:SOUrce:DIFFerential command.

Description

This command specifies the Ethernet data source for differential input. The supported source waveforms are channels 1-4, math waveform, and reference waveforms 1-4. The default is channel 1.

Usage

Using the .query() method will send the BUS:B<x>:ETHERnet:SOUrce:DIFFerential? query.
Using the .verify(value) method will send the BUS:B<x>:ETHERnet:SOUrce:DIFFerential? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:ETHERnet:SOUrce:DIFFerential value command.

SCPI Syntax

- BUS:B<x>:ETHERnet:SOUrce:DIFFerential {CH<x>|MATH|REF<x>}
- BUS:B<x>:ETHERnet:SOUrce:DIFFerential?

Info

CH<x> specifies to use one of the channels 1-4 as the Ethernet data source for differential input.
MATH specifies to use the math waveform as the source for Ethernet data differential input.
REF<x> specifies to use one of the reference waveforms 1-4 as the source for Ethernet data differential input.

BusBItemEthernetSourceDminus ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:ETHERnet:SOUrce:DMINus command.

Description

This command specifies the Ethernet data source for D- input for single-ended probing. The default is Channel 2.

Usage

Using the .query() method will send the BUS:B<x>:ETHERnet:SOUrce:DMINus? query.
Using the .verify(value) method will send the BUS:B<x>:ETHERnet:SOUrce:DMINus? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:ETHERnet:SOUrce:DMINus value command.

SCPI Syntax

- BUS:B<x>:ETHERnet:SOUrce:DMINus {CH<x>|D<x>}
- BUS:B<x>:ETHERnet:SOUrce:DMINus?

Info

CH<x> specifies to use one of the analog channels as the Ethernet data source for the D- input.
D<x> specifies to use one of the digital channels D0 - D15 as the Ethernet data source for the D- input.

BusBItemEthernetType ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:ETHERnet:TYPe command.

Description

This command specifies the Ethernet standard type: 10Base-T or 100Base-T. The default is ENET 100 BASETX.

Usage

Using the .query() method will send the BUS:B<x>:ETHERnet:TYPe? query.
Using the .verify(value) method will send the BUS:B<x>:ETHERnet:TYPe? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:ETHERnet:TYPe value command.

SCPI Syntax

- BUS:B<x>:ETHERnet:TYPe {ENET10BASET|ENET100BASETX}
- BUS:B<x>:ETHERnet:TYPe?

Info

ENET10BASET specifies the Ethernet type as 10Base-T standard. This standard supports data transfer rates up to 10 Mbps (also called Twisted Pair Ethernet).
ENET100BASETX specifies the Ethernet type as 100Base-T standard. This standard supports data transfer rates up to 100 Mbps (also called Fast Ethernet).

BusBItemFlexray ¶

Bases: SCPICmdRead

The BUS:B<x>:FLEXray command tree.

Usage

Using the .query() method will send the BUS:B<x>:FLEXray? query.
Using the .verify(value) method will send the BUS:B<x>:FLEXray? query and raise an AssertionError if the returned value does not match value.

Properties

.bitrate: The BUS:B<x>:FLEXray:BITRate command.
.channel: The BUS:B<x>:FLEXray:CHannel command.
.signal: The BUS:B<x>:FLEXray:SIGnal command.
.source: The BUS:B<x>:FLEXray:SOUrce command.

bitrate `property` ¶

bitrate: BusBItemFlexrayBitrate

Return the BUS:B<x>:FLEXray:BITRate command.

Description

Specifies the bit rate for the FlexRay bus signal. The maximum bitrate is 100 Mbps.

Usage

Using the .query() method will send the BUS:B<x>:FLEXray:BITRate? query.
Using the .verify(value) method will send the BUS:B<x>:FLEXray:BITRate? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:FLEXray:BITRate value command.

SCPI Syntax

- BUS:B<x>:FLEXray:BITRate <NR1>
- BUS:B<x>:FLEXray:BITRate?

Info

<NR1> specifies the FlexRay bus bit rate. You can enter any positive integer, and the instrument will coerce the value to the closest supported bit rate.

channel `property` ¶

channel: BusBItemFlexrayChannel

Return the BUS:B<x>:FLEXray:CHannel command.

Description

Specifies the FlexRay bus ID format.

Usage

Using the .query() method will send the BUS:B<x>:FLEXray:CHannel? query.
Using the .verify(value) method will send the BUS:B<x>:FLEXray:CHannel? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:FLEXray:CHannel value command.

SCPI Syntax

- BUS:B<x>:FLEXray:CHannel {A|B}
- BUS:B<x>:FLEXray:CHannel?

Info

B<x> is the number of the bus.
A sets the FlexRay ID format to channel A.
B sets the FlexRay ID format to channel B.

signal `property` ¶

signal: BusBItemFlexraySignal

Return the BUS:B<x>:FLEXray:SIGnal command.

Description

Specifies the FlexRay bus standard.

Usage

Using the .query() method will send the BUS:B<x>:FLEXray:SIGnal? query.
Using the .verify(value) method will send the BUS:B<x>:FLEXray:SIGnal? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:FLEXray:SIGnal value command.

SCPI Syntax

- BUS:B<x>:FLEXray:SIGnal {BDIFFBP|BM|TXRX}
- BUS:B<x>:FLEXray:SIGnal?

Info

B<x> is the number of the bus.
BDIFFBP sets the FlexRay standard to BDIFFBP.
BM sets the FlexRay standard to BM.
TXRX sets the FlexRay standard to TXRX.

source `property` ¶

source: BusBItemFlexraySource

Return the BUS:B<x>:FLEXray:SOUrce command.

Description

Specifies the FlexRay bus source waveform.

Usage

Using the .query() method will send the BUS:B<x>:FLEXray:SOUrce? query.
Using the .verify(value) method will send the BUS:B<x>:FLEXray:SOUrce? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:FLEXray:SOUrce value command.

SCPI Syntax

- BUS:B<x>:FLEXray:SOUrce {CH<x>|D<x>}
- BUS:B<x>:FLEXray:SOUrce?

Info

CH<x> specifies an analog channel as the source waveform.

BusBItemFlexrayBitrate ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:FLEXray:BITRate command.

Description

Specifies the bit rate for the FlexRay bus signal. The maximum bitrate is 100 Mbps.

Usage

Using the .query() method will send the BUS:B<x>:FLEXray:BITRate? query.
Using the .verify(value) method will send the BUS:B<x>:FLEXray:BITRate? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:FLEXray:BITRate value command.

SCPI Syntax

- BUS:B<x>:FLEXray:BITRate <NR1>
- BUS:B<x>:FLEXray:BITRate?

Info

<NR1> specifies the FlexRay bus bit rate. You can enter any positive integer, and the instrument will coerce the value to the closest supported bit rate.

BusBItemFlexrayChannel ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:FLEXray:CHannel command.

Description

Specifies the FlexRay bus ID format.

Usage

Using the .query() method will send the BUS:B<x>:FLEXray:CHannel? query.
Using the .verify(value) method will send the BUS:B<x>:FLEXray:CHannel? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:FLEXray:CHannel value command.

SCPI Syntax

- BUS:B<x>:FLEXray:CHannel {A|B}
- BUS:B<x>:FLEXray:CHannel?

Info

B<x> is the number of the bus.
A sets the FlexRay ID format to channel A.
B sets the FlexRay ID format to channel B.

BusBItemFlexraySignal ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:FLEXray:SIGnal command.

Description

Specifies the FlexRay bus standard.

Usage

Using the .query() method will send the BUS:B<x>:FLEXray:SIGnal? query.
Using the .verify(value) method will send the BUS:B<x>:FLEXray:SIGnal? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:FLEXray:SIGnal value command.

SCPI Syntax

- BUS:B<x>:FLEXray:SIGnal {BDIFFBP|BM|TXRX}
- BUS:B<x>:FLEXray:SIGnal?

Info

B<x> is the number of the bus.
BDIFFBP sets the FlexRay standard to BDIFFBP.
BM sets the FlexRay standard to BM.
TXRX sets the FlexRay standard to TXRX.

BusBItemFlexraySource ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:FLEXray:SOUrce command.

Description

Specifies the FlexRay bus source waveform.

Usage

Using the .query() method will send the BUS:B<x>:FLEXray:SOUrce? query.
Using the .verify(value) method will send the BUS:B<x>:FLEXray:SOUrce? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:FLEXray:SOUrce value command.

SCPI Syntax

- BUS:B<x>:FLEXray:SOUrce {CH<x>|D<x>}
- BUS:B<x>:FLEXray:SOUrce?

Info

CH<x> specifies an analog channel as the source waveform.

BusBItemI2c ¶

Bases: SCPICmdRead

The BUS:B<x>:I2C command tree.

Usage

Using the .query() method will send the BUS:B<x>:I2C? query.
Using the .verify(value) method will send the BUS:B<x>:I2C? query and raise an AssertionError if the returned value does not match value.

Properties

.address: The BUS:B<x>:I2C:ADDRess command tree.
.clock: The BUS:B<x>:I2C:CLOCk command tree.
.sclk: The BUS:B<x>:I2C:SCLk command tree.
.data: The BUS:B<x>:I2C:DATa command tree.
.sdata: The BUS:B<x>:I2C:SDAta command tree.

address `property` ¶

address: BusBItemI2cAddress

Return the BUS:B<x>:I2C:ADDRess command tree.

Usage

Using the .query() method will send the BUS:B<x>:I2C:ADDRess? query.
Using the .verify(value) method will send the BUS:B<x>:I2C:ADDRess? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.rwinclude: The BUS:B<x>:I2C:ADDRess:RWINClude command.

clock `property` ¶

clock: BusBItemI2cClock

Return the BUS:B<x>:I2C:CLOCk command tree.

Usage

Using the .query() method will send the BUS:B<x>:I2C:CLOCk? query.
Using the .verify(value) method will send the BUS:B<x>:I2C:CLOCk? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.source: The BUS:B<x>:I2C:CLOCk:SOUrce command.

data `property` ¶

data: BusBItemI2cData

Return the BUS:B<x>:I2C:DATa command tree.

Usage

Using the .query() method will send the BUS:B<x>:I2C:DATa? query.
Using the .verify(value) method will send the BUS:B<x>:I2C:DATa? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.source: The BUS:B<x>:I2C:DATa:SOUrce command.

sclk `property` ¶

sclk: BusBItemI2cSclk

Return the BUS:B<x>:I2C:SCLk command tree.

Usage

Using the .query() method will send the BUS:B<x>:I2C:SCLk? query.
Using the .verify(value) method will send the BUS:B<x>:I2C:SCLk? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.source: The BUS:B<x>:I2C:SCLk:SOUrce command.

sdata `property` ¶

sdata: BusBItemI2cSdata

Return the BUS:B<x>:I2C:SDAta command tree.

Usage

Using the .query() method will send the BUS:B<x>:I2C:SDAta? query.
Using the .verify(value) method will send the BUS:B<x>:I2C:SDAta? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.source: The BUS:B<x>:I2C:SDAta:SOUrce command.

BusBItemI2cAddress ¶

Bases: SCPICmdRead

The BUS:B<x>:I2C:ADDRess command tree.

Usage

Using the .query() method will send the BUS:B<x>:I2C:ADDRess? query.
Using the .verify(value) method will send the BUS:B<x>:I2C:ADDRess? query and raise an AssertionError if the returned value does not match value.

Properties

.rwinclude: The BUS:B<x>:I2C:ADDRess:RWINClude command.

rwinclude `property` ¶

rwinclude: BusBItemI2cAddressRwinclude

Return the BUS:B<x>:I2C:ADDRess:RWINClude command.

Description

Sets and returns whether the read/write bit is included in the address.

Usage

Using the .query() method will send the BUS:B<x>:I2C:ADDRess:RWINClude? query.
Using the .verify(value) method will send the BUS:B<x>:I2C:ADDRess:RWINClude? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:I2C:ADDRess:RWINClude value command.

SCPI Syntax

- BUS:B<x>:I2C:ADDRess:RWINClude {ON|OFF|<NR1>}
- BUS:B<x>:I2C:ADDRess:RWINClude?

Info

<NR1> = 0 does not include the read/write bit in the address; any other value includes the read/write bit in the address.

BusBItemI2cAddressRwinclude ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:I2C:ADDRess:RWINClude command.

Description

Sets and returns whether the read/write bit is included in the address.

Usage

Using the .query() method will send the BUS:B<x>:I2C:ADDRess:RWINClude? query.
Using the .verify(value) method will send the BUS:B<x>:I2C:ADDRess:RWINClude? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:I2C:ADDRess:RWINClude value command.

SCPI Syntax

- BUS:B<x>:I2C:ADDRess:RWINClude {ON|OFF|<NR1>}
- BUS:B<x>:I2C:ADDRess:RWINClude?

Info

<NR1> = 0 does not include the read/write bit in the address; any other value includes the read/write bit in the address.

BusBItemI2cClock ¶

Bases: SCPICmdRead

The BUS:B<x>:I2C:CLOCk command tree.

Usage

Using the .query() method will send the BUS:B<x>:I2C:CLOCk? query.
Using the .verify(value) method will send the BUS:B<x>:I2C:CLOCk? query and raise an AssertionError if the returned value does not match value.

Properties

.source: The BUS:B<x>:I2C:CLOCk:SOUrce command.

source `property` ¶

source: BusBItemI2cClockSource

Return the BUS:B<x>:I2C:CLOCk:SOUrce command.

Description

This command specifies the SCLK source for the I2C bus.

Usage

Using the .query() method will send the BUS:B<x>:I2C:CLOCk:SOUrce? query.
Using the .verify(value) method will send the BUS:B<x>:I2C:CLOCk:SOUrce? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:I2C:CLOCk:SOUrce value command.

SCPI Syntax

- BUS:B<x>:I2C:CLOCk:SOUrce {CH<x>|D<x>}
- BUS:B<x>:I2C:CLOCk:SOUrce?

Info

CH<x> specifies an analog channel as the SCLK source waveform.
D<x> specifies a digital channel as the SCLK source waveform. (Requires option 3-MSO.).

BusBItemI2cClockSource ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:I2C:CLOCk:SOUrce command.

Description

This command specifies the SCLK source for the I2C bus.

Usage

Using the .query() method will send the BUS:B<x>:I2C:CLOCk:SOUrce? query.
Using the .verify(value) method will send the BUS:B<x>:I2C:CLOCk:SOUrce? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:I2C:CLOCk:SOUrce value command.

SCPI Syntax

- BUS:B<x>:I2C:CLOCk:SOUrce {CH<x>|D<x>}
- BUS:B<x>:I2C:CLOCk:SOUrce?

Info

CH<x> specifies an analog channel as the SCLK source waveform.
D<x> specifies a digital channel as the SCLK source waveform. (Requires option 3-MSO.).

BusBItemI2cData ¶

Bases: SCPICmdRead

The BUS:B<x>:I2C:DATa command tree.

Usage

Using the .query() method will send the BUS:B<x>:I2C:DATa? query.
Using the .verify(value) method will send the BUS:B<x>:I2C:DATa? query and raise an AssertionError if the returned value does not match value.

Properties

.source: The BUS:B<x>:I2C:DATa:SOUrce command.

source `property` ¶

source: BusBItemI2cDataSource

Return the BUS:B<x>:I2C:DATa:SOUrce command.

Description

Specifies the SDATA source for the I2C bus.

Usage

Using the .query() method will send the BUS:B<x>:I2C:DATa:SOUrce? query.
Using the .verify(value) method will send the BUS:B<x>:I2C:DATa:SOUrce? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:I2C:DATa:SOUrce value command.

SCPI Syntax

- BUS:B<x>:I2C:DATa:SOUrce {CH<x>|D<x>}
- BUS:B<x>:I2C:DATa:SOUrce?

Info

CH<x> specifies an analog channel as the I2C SDATA source waveform.
D<x> specifies a digital channel as the I2C SDATA source waveform. (Requires option 3-MSO.).

BusBItemI2cDataSource ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:I2C:DATa:SOUrce command.

Description

Specifies the SDATA source for the I2C bus.

Usage

Using the .query() method will send the BUS:B<x>:I2C:DATa:SOUrce? query.
Using the .verify(value) method will send the BUS:B<x>:I2C:DATa:SOUrce? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:I2C:DATa:SOUrce value command.

SCPI Syntax

- BUS:B<x>:I2C:DATa:SOUrce {CH<x>|D<x>}
- BUS:B<x>:I2C:DATa:SOUrce?

Info

CH<x> specifies an analog channel as the I2C SDATA source waveform.
D<x> specifies a digital channel as the I2C SDATA source waveform. (Requires option 3-MSO.).

BusBItemI2cSclk ¶

Bases: SCPICmdRead

The BUS:B<x>:I2C:SCLk command tree.

Usage

Using the .query() method will send the BUS:B<x>:I2C:SCLk? query.
Using the .verify(value) method will send the BUS:B<x>:I2C:SCLk? query and raise an AssertionError if the returned value does not match value.

Properties

.source: The BUS:B<x>:I2C:SCLk:SOUrce command.

source `property` ¶

source: BusBItemI2cSclkSource

Return the BUS:B<x>:I2C:SCLk:SOUrce command.

Description

This command specifies the SCLK source for the I2C bus.

Usage

Using the .query() method will send the BUS:B<x>:I2C:SCLk:SOUrce? query.
Using the .verify(value) method will send the BUS:B<x>:I2C:SCLk:SOUrce? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:I2C:SCLk:SOUrce value command.

SCPI Syntax

- BUS:B<x>:I2C:SCLk:SOUrce {CH<x>|D<x>}
- BUS:B<x>:I2C:SCLk:SOUrce?

Info

CH<x> specifies an analog channel as the SCLK source waveform.
D<x> specifies a digital channel as the SCLK source waveform. (Requires option 3-MSO.).

BusBItemI2cSclkSource ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:I2C:SCLk:SOUrce command.

Description

This command specifies the SCLK source for the I2C bus.

Usage

Using the .query() method will send the BUS:B<x>:I2C:SCLk:SOUrce? query.
Using the .verify(value) method will send the BUS:B<x>:I2C:SCLk:SOUrce? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:I2C:SCLk:SOUrce value command.

SCPI Syntax

- BUS:B<x>:I2C:SCLk:SOUrce {CH<x>|D<x>}
- BUS:B<x>:I2C:SCLk:SOUrce?

Info

CH<x> specifies an analog channel as the SCLK source waveform.
D<x> specifies a digital channel as the SCLK source waveform. (Requires option 3-MSO.).

BusBItemI2cSdata ¶

Bases: SCPICmdRead

The BUS:B<x>:I2C:SDAta command tree.

Usage

Using the .query() method will send the BUS:B<x>:I2C:SDAta? query.
Using the .verify(value) method will send the BUS:B<x>:I2C:SDAta? query and raise an AssertionError if the returned value does not match value.

Properties

.source: The BUS:B<x>:I2C:SDAta:SOUrce command.

source `property` ¶

source: BusBItemI2cSdataSource

Return the BUS:B<x>:I2C:SDAta:SOUrce command.

Description

Specifies the SDATA source for the I2C bus.

Usage

Using the .query() method will send the BUS:B<x>:I2C:SDAta:SOUrce? query.
Using the .verify(value) method will send the BUS:B<x>:I2C:SDAta:SOUrce? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:I2C:SDAta:SOUrce value command.

SCPI Syntax

- BUS:B<x>:I2C:SDAta:SOUrce {CH<x>|D<x>}
- BUS:B<x>:I2C:SDAta:SOUrce?

Info

CH<x> specifies an analog channel as the I2C SDATA source waveform.
D<x> specifies a digital channel as the I2C SDATA source waveform. (Requires option 3-MSO.).

BusBItemI2cSdataSource ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:I2C:SDAta:SOUrce command.

Description

Specifies the SDATA source for the I2C bus.

Usage

Using the .query() method will send the BUS:B<x>:I2C:SDAta:SOUrce? query.
Using the .verify(value) method will send the BUS:B<x>:I2C:SDAta:SOUrce? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:I2C:SDAta:SOUrce value command.

SCPI Syntax

- BUS:B<x>:I2C:SDAta:SOUrce {CH<x>|D<x>}
- BUS:B<x>:I2C:SDAta:SOUrce?

Info

CH<x> specifies an analog channel as the I2C SDATA source waveform.
D<x> specifies a digital channel as the I2C SDATA source waveform. (Requires option 3-MSO.).

BusBItemLabel ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:LABel command.

Description

Specifies the waveform label for the bus.

Usage

Using the .query() method will send the BUS:B<x>:LABel? query.
Using the .verify(value) method will send the BUS:B<x>:LABel? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:LABel value command.

SCPI Syntax

- BUS:B<x>:LABel <Qstring>
- BUS:B<x>:LABel?

Info

<Qstring> is an alphanumeric string of text, enclosed in quotes, that contains the text label information for bus . The text string is limited to 30 characters.

BusBItemLin ¶

Bases: SCPICmdRead

The BUS:B<x>:LIN command tree.

Usage

Using the .query() method will send the BUS:B<x>:LIN? query.
Using the .verify(value) method will send the BUS:B<x>:LIN? query and raise an AssertionError if the returned value does not match value.

Properties

.bitrate: The BUS:B<x>:LIN:BITRate command.
.idformat: The BUS:B<x>:LIN:IDFORmat command.
.maxbytedelim: The BUS:B<x>:LIN:MAXBytedelim command.
.polarity: The BUS:B<x>:LIN:POLarity command.
.samplepoint: The BUS:B<x>:LIN:SAMPLEpoint command.
.source: The BUS:B<x>:LIN:SOUrce command.
.standard: The BUS:B<x>:LIN:STANDard command.

bitrate `property` ¶

bitrate: BusBItemLinBitrate

Return the BUS:B<x>:LIN:BITRate command.

Description

Specifies the bit rate for the LIN bus.

Usage

Using the .query() method will send the BUS:B<x>:LIN:BITRate? query.
Using the .verify(value) method will send the BUS:B<x>:LIN:BITRate? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:LIN:BITRate value command.

SCPI Syntax

- BUS:B<x>:LIN:BITRate <NR1>
- BUS:B<x>:LIN:BITRate?

Info

<NR1> is the LIN bus bit rate. You can enter any positive integer, and the instrument will coerce the value to the closest supported bit rate.

idformat `property` ¶

idformat: BusBItemLinIdformat

Return the BUS:B<x>:LIN:IDFORmat command.

Description

This command sets or queries LIN bus identifier format for the specified bus. The bus number is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:LIN:IDFORmat? query.
Using the .verify(value) method will send the BUS:B<x>:LIN:IDFORmat? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:LIN:IDFORmat value command.

SCPI Syntax

- BUS:B<x>:LIN:IDFORmat {NOPARity|PARity}
- BUS:B<x>:LIN:IDFORmat?

Info

B<x> is the number of the bus.
NOPARity specifies an id format that includes parity.
PARity specifies an id format that separates parity.

maxbytedelim `property` ¶

maxbytedelim: BusBItemLinMaxbytedelim

Return the BUS:B<x>:LIN:MAXBytedelim command.

Description

Specifies the maximum byte delimiter for the LIN bus.

Usage

Using the .query() method will send the BUS:B<x>:LIN:MAXBytedelim? query.
Using the .verify(value) method will send the BUS:B<x>:LIN:MAXBytedelim? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:LIN:MAXBytedelim value command.

SCPI Syntax

- BUS:B<x>:LIN:MAXBytedelim <NR1>
- BUS:B<x>:LIN:MAXBytedelim?

Info

<NR1> is the maximum byte delimiter for the LIN bus.

polarity `property` ¶

polarity: BusBItemLinPolarity

Return the BUS:B<x>:LIN:POLarity command.

Description

Specifies the LIN bus polarity.

Usage

Using the .query() method will send the BUS:B<x>:LIN:POLarity? query.
Using the .verify(value) method will send the BUS:B<x>:LIN:POLarity? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:LIN:POLarity value command.

SCPI Syntax

- BUS:B<x>:LIN:POLarity {NORMal|INVerted}
- BUS:B<x>:LIN:POLarity?

Info

NORMal specifies normal polarity.
INVerted specifies inverted polarity.

samplepoint `property` ¶

samplepoint: BusBItemLinSamplepoint

Return the BUS:B<x>:LIN:SAMPLEpoint command.

Description

Specifies the LIN sample point, for the specified LIN bus. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:LIN:SAMPLEpoint? query.
Using the .verify(value) method will send the BUS:B<x>:LIN:SAMPLEpoint? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:LIN:SAMPLEpoint value command.

SCPI Syntax

- BUS:B<x>:LIN:SAMPLEpoint <NR1>
- BUS:B<x>:LIN:SAMPLEpoint?

Info

B<x> is the number of the bus.
<NR1> is a percentage that represents the point at which to sample during each bit period.

source `property` ¶

source: BusBItemLinSource

Return the BUS:B<x>:LIN:SOUrce command.

Description

Specifies the source waveform for the LIN bus.

Usage

Using the .query() method will send the BUS:B<x>:LIN:SOUrce? query.
Using the .verify(value) method will send the BUS:B<x>:LIN:SOUrce? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:LIN:SOUrce value command.

SCPI Syntax

- BUS:B<x>:LIN:SOUrce {CH<x>|D<x>}
- BUS:B<x>:LIN:SOUrce?

Info

CH<x> specifies an analog channel as the source waveform.
D<x> specifies a digital channel as the source waveform. (Requires option 3-MSO.).

standard `property` ¶

standard: BusBItemLinStandard

Return the BUS:B<x>:LIN:STANDard command.

Description

Specifies the LIN bus standard to use.

Usage

Using the .query() method will send the BUS:B<x>:LIN:STANDard? query.
Using the .verify(value) method will send the BUS:B<x>:LIN:STANDard? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:LIN:STANDard value command.

SCPI Syntax

- BUS:B<x>:LIN:STANDard {V1X|V2X|MIXed}
- BUS:B<x>:LIN:STANDard?

Info

V1X sets the LIN bus standard to V1X.
V2X sets the LIN bus standard to V2X.
MIXed sets the LIN bus standard to MIXED.

BusBItemLinBitrate ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:LIN:BITRate command.

Description

Specifies the bit rate for the LIN bus.

Usage

Using the .query() method will send the BUS:B<x>:LIN:BITRate? query.
Using the .verify(value) method will send the BUS:B<x>:LIN:BITRate? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:LIN:BITRate value command.

SCPI Syntax

- BUS:B<x>:LIN:BITRate <NR1>
- BUS:B<x>:LIN:BITRate?

Info

<NR1> is the LIN bus bit rate. You can enter any positive integer, and the instrument will coerce the value to the closest supported bit rate.

BusBItemLinIdformat ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:LIN:IDFORmat command.

Description

This command sets or queries LIN bus identifier format for the specified bus. The bus number is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:LIN:IDFORmat? query.
Using the .verify(value) method will send the BUS:B<x>:LIN:IDFORmat? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:LIN:IDFORmat value command.

SCPI Syntax

- BUS:B<x>:LIN:IDFORmat {NOPARity|PARity}
- BUS:B<x>:LIN:IDFORmat?

Info

B<x> is the number of the bus.
NOPARity specifies an id format that includes parity.
PARity specifies an id format that separates parity.

BusBItemLinMaxbytedelim ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:LIN:MAXBytedelim command.

Description

Specifies the maximum byte delimiter for the LIN bus.

Usage

Using the .query() method will send the BUS:B<x>:LIN:MAXBytedelim? query.
Using the .verify(value) method will send the BUS:B<x>:LIN:MAXBytedelim? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:LIN:MAXBytedelim value command.

SCPI Syntax

- BUS:B<x>:LIN:MAXBytedelim <NR1>
- BUS:B<x>:LIN:MAXBytedelim?

Info

<NR1> is the maximum byte delimiter for the LIN bus.

BusBItemLinPolarity ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:LIN:POLarity command.

Description

Specifies the LIN bus polarity.

Usage

Using the .query() method will send the BUS:B<x>:LIN:POLarity? query.
Using the .verify(value) method will send the BUS:B<x>:LIN:POLarity? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:LIN:POLarity value command.

SCPI Syntax

- BUS:B<x>:LIN:POLarity {NORMal|INVerted}
- BUS:B<x>:LIN:POLarity?

Info

NORMal specifies normal polarity.
INVerted specifies inverted polarity.

BusBItemLinSamplepoint ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:LIN:SAMPLEpoint command.

Description

Specifies the LIN sample point, for the specified LIN bus. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:LIN:SAMPLEpoint? query.
Using the .verify(value) method will send the BUS:B<x>:LIN:SAMPLEpoint? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:LIN:SAMPLEpoint value command.

SCPI Syntax

- BUS:B<x>:LIN:SAMPLEpoint <NR1>
- BUS:B<x>:LIN:SAMPLEpoint?

Info

B<x> is the number of the bus.
<NR1> is a percentage that represents the point at which to sample during each bit period.

BusBItemLinSource ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:LIN:SOUrce command.

Description

Specifies the source waveform for the LIN bus.

Usage

Using the .query() method will send the BUS:B<x>:LIN:SOUrce? query.
Using the .verify(value) method will send the BUS:B<x>:LIN:SOUrce? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:LIN:SOUrce value command.

SCPI Syntax

- BUS:B<x>:LIN:SOUrce {CH<x>|D<x>}
- BUS:B<x>:LIN:SOUrce?

Info

CH<x> specifies an analog channel as the source waveform.
D<x> specifies a digital channel as the source waveform. (Requires option 3-MSO.).

BusBItemLinStandard ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:LIN:STANDard command.

Description

Specifies the LIN bus standard to use.

Usage

Using the .query() method will send the BUS:B<x>:LIN:STANDard? query.
Using the .verify(value) method will send the BUS:B<x>:LIN:STANDard? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:LIN:STANDard value command.

SCPI Syntax

- BUS:B<x>:LIN:STANDard {V1X|V2X|MIXed}
- BUS:B<x>:LIN:STANDard?

Info

V1X sets the LIN bus standard to V1X.
V2X sets the LIN bus standard to V2X.
MIXed sets the LIN bus standard to MIXED.

BusBItemMil1553b ¶

Bases: SCPICmdRead

The BUS:B<x>:MIL1553B command tree.

Usage

Using the .query() method will send the BUS:B<x>:MIL1553B? query.
Using the .verify(value) method will send the BUS:B<x>:MIL1553B? query and raise an AssertionError if the returned value does not match value.

Info

B<x> is the number of the bus.

Properties

.polarity: The BUS:B<x>:MIL1553B:POLarity command.
.responsetime: The BUS:B<x>:MIL1553B:RESPonsetime command tree.
.source: The BUS:B<x>:MIL1553B:SOUrce command.

polarity `property` ¶

polarity: BusBItemMil1553bPolarity

Return the BUS:B<x>:MIL1553B:POLarity command.

Description

This command sets the polarity of the MIL-STD-1553 bus (normal or inverted).

Usage

Using the .query() method will send the BUS:B<x>:MIL1553B:POLarity? query.
Using the .verify(value) method will send the BUS:B<x>:MIL1553B:POLarity? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:MIL1553B:POLarity value command.

SCPI Syntax

- BUS:B<x>:MIL1553B:POLarity {NORMal|INVERTed}
- BUS:B<x>:MIL1553B:POLarity?

Info

B<x> is the number of the bus.
NORMal - A high-low transition represents a 1 on the Data+ line.
INVERTed - A high-low transition represents a 0 on the Data+ line.

responsetime `property` ¶

responsetime: BusBItemMil1553bResponsetime

Return the BUS:B<x>:MIL1553B:RESPonsetime command tree.

Usage

Using the .query() method will send the BUS:B<x>:MIL1553B:RESPonsetime? query.
Using the .verify(value) method will send the BUS:B<x>:MIL1553B:RESPonsetime? query and raise an AssertionError if the returned value does not match value.

Info

B<x> is the number of the bus.

Sub-properties

.maximum: The BUS:B<x>:MIL1553B:RESPonsetime:MAXimum command.
.minimum: The BUS:B<x>:MIL1553B:RESPonsetime:MINimum command.

source `property` ¶

source: BusBItemMil1553bSource

Return the BUS:B<x>:MIL1553B:SOUrce command.

Description

This command specifies the source for differential input for the MIL-STD-1553 bus. The supported source waveforms are channels 1-4, math waveform, and reference waveforms 1-4. The default is channel 1.

Usage

Using the .query() method will send the BUS:B<x>:MIL1553B:SOUrce? query.
Using the .verify(value) method will send the BUS:B<x>:MIL1553B:SOUrce? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:MIL1553B:SOUrce value command.

SCPI Syntax

- BUS:B<x>:MIL1553B:SOUrce {CH<x>|MATH|REF<x>}
- BUS:B<x>:MIL1553B:SOUrce?

Info

CH<x> specifies an analog channel as the source for differential input.
MATH specifies the math waveform as the MIL-STD-1553 bus source for differential input.
REF<x> specifies a reference waveform as the source for differential input.

BusBItemMil1553bPolarity ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:MIL1553B:POLarity command.

Description

This command sets the polarity of the MIL-STD-1553 bus (normal or inverted).

Usage

Using the .query() method will send the BUS:B<x>:MIL1553B:POLarity? query.
Using the .verify(value) method will send the BUS:B<x>:MIL1553B:POLarity? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:MIL1553B:POLarity value command.

SCPI Syntax

- BUS:B<x>:MIL1553B:POLarity {NORMal|INVERTed}
- BUS:B<x>:MIL1553B:POLarity?

Info

B<x> is the number of the bus.
NORMal - A high-low transition represents a 1 on the Data+ line.
INVERTed - A high-low transition represents a 0 on the Data+ line.

BusBItemMil1553bResponsetime ¶

Bases: SCPICmdRead

The BUS:B<x>:MIL1553B:RESPonsetime command tree.

Usage

Using the .query() method will send the BUS:B<x>:MIL1553B:RESPonsetime? query.
Using the .verify(value) method will send the BUS:B<x>:MIL1553B:RESPonsetime? query and raise an AssertionError if the returned value does not match value.

Info

B<x> is the number of the bus.

Properties

.maximum: The BUS:B<x>:MIL1553B:RESPonsetime:MAXimum command.
.minimum: The BUS:B<x>:MIL1553B:RESPonsetime:MINimum command.

maximum `property` ¶

maximum: BusBItemMil1553bResponsetimeMaximum

Return the BUS:B<x>:MIL1553B:RESPonsetime:MAXimum command.

Description

This command specifies the maximum response time to a valid command issued for the MIL-STD-1553 bus.

Usage

Using the .query() method will send the BUS:B<x>:MIL1553B:RESPonsetime:MAXimum? query.
Using the .verify(value) method will send the BUS:B<x>:MIL1553B:RESPonsetime:MAXimum? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:MIL1553B:RESPonsetime:MAXimum value command.

SCPI Syntax

- BUS:B<x>:MIL1553B:RESPonsetime:MAXimum <NR3>
- BUS:B<x>:MIL1553B:RESPonsetime:MAXimum?

Info

B<x> is the number of the bus.
<NR3> is a floating point number that specifies the maximum response time, in seconds.

minimum `property` ¶

minimum: BusBItemMil1553bResponsetimeMinimum

Return the BUS:B<x>:MIL1553B:RESPonsetime:MINimum command.

Description

This command specifies the minimum response time to a valid command issued for the MIL-STD-1553 bus.

Usage

Using the .query() method will send the BUS:B<x>:MIL1553B:RESPonsetime:MINimum? query.
Using the .verify(value) method will send the BUS:B<x>:MIL1553B:RESPonsetime:MINimum? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:MIL1553B:RESPonsetime:MINimum value command.

SCPI Syntax

- BUS:B<x>:MIL1553B:RESPonsetime:MINimum <NR3>
- BUS:B<x>:MIL1553B:RESPonsetime:MINimum?

Info

B<x> is the Bus number.
<NR3> is a floating point number that specifies the minimum response time, in seconds.

BusBItemMil1553bResponsetimeMaximum ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:MIL1553B:RESPonsetime:MAXimum command.

Description

This command specifies the maximum response time to a valid command issued for the MIL-STD-1553 bus.

Usage

Using the .query() method will send the BUS:B<x>:MIL1553B:RESPonsetime:MAXimum? query.
Using the .verify(value) method will send the BUS:B<x>:MIL1553B:RESPonsetime:MAXimum? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:MIL1553B:RESPonsetime:MAXimum value command.

SCPI Syntax

- BUS:B<x>:MIL1553B:RESPonsetime:MAXimum <NR3>
- BUS:B<x>:MIL1553B:RESPonsetime:MAXimum?

Info

B<x> is the number of the bus.
<NR3> is a floating point number that specifies the maximum response time, in seconds.

BusBItemMil1553bResponsetimeMinimum ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:MIL1553B:RESPonsetime:MINimum command.

Description

This command specifies the minimum response time to a valid command issued for the MIL-STD-1553 bus.

Usage

Using the .query() method will send the BUS:B<x>:MIL1553B:RESPonsetime:MINimum? query.
Using the .verify(value) method will send the BUS:B<x>:MIL1553B:RESPonsetime:MINimum? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:MIL1553B:RESPonsetime:MINimum value command.

SCPI Syntax

- BUS:B<x>:MIL1553B:RESPonsetime:MINimum <NR3>
- BUS:B<x>:MIL1553B:RESPonsetime:MINimum?

Info

B<x> is the Bus number.
<NR3> is a floating point number that specifies the minimum response time, in seconds.

BusBItemMil1553bSource ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:MIL1553B:SOUrce command.

Description

This command specifies the source for differential input for the MIL-STD-1553 bus. The supported source waveforms are channels 1-4, math waveform, and reference waveforms 1-4. The default is channel 1.

Usage

Using the .query() method will send the BUS:B<x>:MIL1553B:SOUrce? query.
Using the .verify(value) method will send the BUS:B<x>:MIL1553B:SOUrce? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:MIL1553B:SOUrce value command.

SCPI Syntax

- BUS:B<x>:MIL1553B:SOUrce {CH<x>|MATH|REF<x>}
- BUS:B<x>:MIL1553B:SOUrce?

Info

CH<x> specifies an analog channel as the source for differential input.
MATH specifies the math waveform as the MIL-STD-1553 bus source for differential input.
REF<x> specifies a reference waveform as the source for differential input.

BusBItemParallel ¶

Bases: SCPICmdRead

The BUS:B<x>:PARallel command tree.

Usage

Using the .query() method will send the BUS:B<x>:PARallel? query.
Using the .verify(value) method will send the BUS:B<x>:PARallel? query and raise an AssertionError if the returned value does not match value.

Properties

.bit: The BUS:B<x>:PARallel:BIT<x> command tree.
.clock: The BUS:B<x>:PARallel:CLOCk command tree.
.width: The BUS:B<x>:PARallel:WIDth command.

bit `property` ¶

bit: dict[int, BusBItemParallelBitItem]

Return the BUS:B<x>:PARallel:BIT<x> command tree.

Usage

Using the .query() method will send the BUS:B<x>:PARallel:BIT<x>? query.
Using the .verify(value) method will send the BUS:B<x>:PARallel:BIT<x>? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.source: The BUS:B<x>:PARallel:BIT<x>:SOUrce command.

clock `property` ¶

clock: BusBItemParallelClock

Return the BUS:B<x>:PARallel:CLOCk command tree.

Usage

Using the .query() method will send the BUS:B<x>:PARallel:CLOCk? query.
Using the .verify(value) method will send the BUS:B<x>:PARallel:CLOCk? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.edge: The BUS:B<x>:PARallel:CLOCk:EDGE command.
.isclocked: The BUS:B<x>:PARallel:CLOCk:ISCLOCKed command.
.source: The BUS:B<x>:PARallel:CLOCk:SOUrce command.

width `property` ¶

width: BusBItemParallelWidth

Return the BUS:B<x>:PARallel:WIDth command.

Description

This command specifies the number of bits to use for the width of the parallel bus.

Usage

Using the .query() method will send the BUS:B<x>:PARallel:WIDth? query.
Using the .verify(value) method will send the BUS:B<x>:PARallel:WIDth? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:PARallel:WIDth value command.

SCPI Syntax

- BUS:B<x>:PARallel:WIDth <NR1>
- BUS:B<x>:PARallel:WIDth?

Info

<NR1> is the number of bits.

BusBItemParallelBitItem ¶

Bases: ValidatedDynamicNumberCmd, SCPICmdRead

The BUS:B<x>:PARallel:BIT<x> command tree.

Usage

Using the .query() method will send the BUS:B<x>:PARallel:BIT<x>? query.
Using the .verify(value) method will send the BUS:B<x>:PARallel:BIT<x>? query and raise an AssertionError if the returned value does not match value.

Properties

.source: The BUS:B<x>:PARallel:BIT<x>:SOUrce command.

source `property` ¶

source: BusBItemParallelBitItemSource

Return the BUS:B<x>:PARallel:BIT<x>:SOUrce command.

Description

Specifies the bit source waveform for the parallel bus.

Usage

Using the .query() method will send the BUS:B<x>:PARallel:BIT<x>:SOUrce? query.
Using the .verify(value) method will send the BUS:B<x>:PARallel:BIT<x>:SOUrce? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:PARallel:BIT<x>:SOUrce value command.

SCPI Syntax

- BUS:B<x>:PARallel:BIT<x>:SOUrce {CH<x>|D<x>}
- BUS:B<x>:PARallel:BIT<x>:SOUrce?

Info

CH<x> specifies an analog channel as the bit source waveform.
D<x> specifies a digital channel as the bit source waveform. (Requires option 3-MSO.).

BusBItemParallelBitItemSource ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:PARallel:BIT<x>:SOUrce command.

Description

Specifies the bit source waveform for the parallel bus.

Usage

Using the .query() method will send the BUS:B<x>:PARallel:BIT<x>:SOUrce? query.
Using the .verify(value) method will send the BUS:B<x>:PARallel:BIT<x>:SOUrce? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:PARallel:BIT<x>:SOUrce value command.

SCPI Syntax

- BUS:B<x>:PARallel:BIT<x>:SOUrce {CH<x>|D<x>}
- BUS:B<x>:PARallel:BIT<x>:SOUrce?

Info

CH<x> specifies an analog channel as the bit source waveform.
D<x> specifies a digital channel as the bit source waveform. (Requires option 3-MSO.).

BusBItemParallelClock ¶

Bases: SCPICmdRead

The BUS:B<x>:PARallel:CLOCk command tree.

Usage

Using the .query() method will send the BUS:B<x>:PARallel:CLOCk? query.
Using the .verify(value) method will send the BUS:B<x>:PARallel:CLOCk? query and raise an AssertionError if the returned value does not match value.

Properties

.edge: The BUS:B<x>:PARallel:CLOCk:EDGE command.
.isclocked: The BUS:B<x>:PARallel:CLOCk:ISCLOCKed command.
.source: The BUS:B<x>:PARallel:CLOCk:SOUrce command.

edge `property` ¶

edge: BusBItemParallelClockEdge

Return the BUS:B<x>:PARallel:CLOCk:EDGE command.

Description

Specifies the clock edge for the parallel bus.

Usage

Using the .query() method will send the BUS:B<x>:PARallel:CLOCk:EDGE? query.
Using the .verify(value) method will send the BUS:B<x>:PARallel:CLOCk:EDGE? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:PARallel:CLOCk:EDGE value command.

SCPI Syntax

- BUS:B<x>:PARallel:CLOCk:EDGE {EITher|RISing|FALling}
- BUS:B<x>:PARallel:CLOCk:EDGE?

Info

EIther specifies either edge as the clock edge.
RISing specifies the rising edge as the clock edge.
FALling specifies the falling edge as the clock edge.

isclocked `property` ¶

isclocked: BusBItemParallelClockIsclocked

Return the BUS:B<x>:PARallel:CLOCk:ISCLOCKed command.

Description

Specifies the state of the clock function for the parallel bus.

Usage

Using the .query() method will send the BUS:B<x>:PARallel:CLOCk:ISCLOCKed? query.
Using the .verify(value) method will send the BUS:B<x>:PARallel:CLOCk:ISCLOCKed? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:PARallel:CLOCk:ISCLOCKed value command.

SCPI Syntax

- BUS:B<x>:PARallel:CLOCk:ISCLOCKed {YES|NO}
- BUS:B<x>:PARallel:CLOCk:ISCLOCKed?

Info

YES specifes that the parallel bus is clocked.
NO specifes that the parallel bus is not clocked.

source `property` ¶

source: BusBItemParallelClockSource

Return the BUS:B<x>:PARallel:CLOCk:SOUrce command.

Description

Specifies the clock source waveform for the parallel bus.

Usage

Using the .query() method will send the BUS:B<x>:PARallel:CLOCk:SOUrce? query.
Using the .verify(value) method will send the BUS:B<x>:PARallel:CLOCk:SOUrce? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:PARallel:CLOCk:SOUrce value command.

SCPI Syntax

- BUS:B<x>:PARallel:CLOCk:SOUrce {CH<x>|D<x>}
- BUS:B<x>:PARallel:CLOCk:SOUrce?

Info

CH<x> specifies an analog channel to use the clock source waveform.
D<x> specifies a digital channels the clock source waveform. (Requires option 3-MSO.).

BusBItemParallelClockEdge ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:PARallel:CLOCk:EDGE command.

Description

Specifies the clock edge for the parallel bus.

Usage

Using the .query() method will send the BUS:B<x>:PARallel:CLOCk:EDGE? query.
Using the .verify(value) method will send the BUS:B<x>:PARallel:CLOCk:EDGE? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:PARallel:CLOCk:EDGE value command.

SCPI Syntax

- BUS:B<x>:PARallel:CLOCk:EDGE {EITher|RISing|FALling}
- BUS:B<x>:PARallel:CLOCk:EDGE?

Info

EIther specifies either edge as the clock edge.
RISing specifies the rising edge as the clock edge.
FALling specifies the falling edge as the clock edge.

BusBItemParallelClockIsclocked ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:PARallel:CLOCk:ISCLOCKed command.

Description

Specifies the state of the clock function for the parallel bus.

Usage

Using the .query() method will send the BUS:B<x>:PARallel:CLOCk:ISCLOCKed? query.
Using the .verify(value) method will send the BUS:B<x>:PARallel:CLOCk:ISCLOCKed? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:PARallel:CLOCk:ISCLOCKed value command.

SCPI Syntax

- BUS:B<x>:PARallel:CLOCk:ISCLOCKed {YES|NO}
- BUS:B<x>:PARallel:CLOCk:ISCLOCKed?

Info

YES specifes that the parallel bus is clocked.
NO specifes that the parallel bus is not clocked.

BusBItemParallelClockSource ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:PARallel:CLOCk:SOUrce command.

Description

Specifies the clock source waveform for the parallel bus.

Usage

Using the .query() method will send the BUS:B<x>:PARallel:CLOCk:SOUrce? query.
Using the .verify(value) method will send the BUS:B<x>:PARallel:CLOCk:SOUrce? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:PARallel:CLOCk:SOUrce value command.

SCPI Syntax

- BUS:B<x>:PARallel:CLOCk:SOUrce {CH<x>|D<x>}
- BUS:B<x>:PARallel:CLOCk:SOUrce?

Info

CH<x> specifies an analog channel to use the clock source waveform.
D<x> specifies a digital channels the clock source waveform. (Requires option 3-MSO.).

BusBItemParallelWidth ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:PARallel:WIDth command.

Description

This command specifies the number of bits to use for the width of the parallel bus.

Usage

Using the .query() method will send the BUS:B<x>:PARallel:WIDth? query.
Using the .verify(value) method will send the BUS:B<x>:PARallel:WIDth? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:PARallel:WIDth value command.

SCPI Syntax

- BUS:B<x>:PARallel:WIDth <NR1>
- BUS:B<x>:PARallel:WIDth?

Info

<NR1> is the number of bits.

BusBItemPosition ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:POSition command.

Description

This command specifies the position of the bus waveform on the display.

Usage

Using the .query() method will send the BUS:B<x>:POSition? query.
Using the .verify(value) method will send the BUS:B<x>:POSition? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:POSition value command.

SCPI Syntax

- BUS:B<x>:POSition <NR3>
- BUS:B<x>:POSition?

Info

<NR3> is a floating point number that specifies the position of the bus waveform on the display.

BusBItemRs232c ¶

Bases: SCPICmdRead

The BUS:B<x>:RS232C command tree.

Usage

Using the .query() method will send the BUS:B<x>:RS232C? query.
Using the .verify(value) method will send the BUS:B<x>:RS232C? query and raise an AssertionError if the returned value does not match value.

Properties

.bitrate: The BUS:B<x>:RS232C:BITRate command.
.databits: The BUS:B<x>:RS232C:DATABits command.
.delimiter: The BUS:B<x>:RS232C:DELIMiter command.
.displaymode: The BUS:B<x>:RS232C:DISplaymode command.
.parity: The BUS:B<x>:RS232C:PARity command.
.polarity: The BUS:B<x>:RS232C:POLarity command.
.rx: The BUS:B<x>:RS232C:RX command tree.
.tx: The BUS:B<x>:RS232C:TX command tree.

bitrate `property` ¶

bitrate: BusBItemRs232cBitrate

Return the BUS:B<x>:RS232C:BITRate command.

Description

This command specifies the bit rate for the RS-232 bus.

Usage

Using the .query() method will send the BUS:B<x>:RS232C:BITRate? query.
Using the .verify(value) method will send the BUS:B<x>:RS232C:BITRate? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:RS232C:BITRate value command.

SCPI Syntax

- BUS:B<x>:RS232C:BITRate <NR1>
- BUS:B<x>:RS232C:BITRate?

Info

<NR1> is the bit rate in bits-per-second. You can enter any positive integer, and the instrument will coerce the value to the closest supported bit rate.

databits `property` ¶

databits: BusBItemRs232cDatabits

Return the BUS:B<x>:RS232C:DATABits command.

Description

This command specifies the number of bits in the data frame for the RS-232 bus.

Usage

Using the .query() method will send the BUS:B<x>:RS232C:DATABits? query.
Using the .verify(value) method will send the BUS:B<x>:RS232C:DATABits? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:RS232C:DATABits value command.

SCPI Syntax

- BUS:B<x>:RS232C:DATABits {7|8|9}
- BUS:B<x>:RS232C:DATABits?

Info

B<x> is the number of the bus.
7 specifies the number of bits as 7 in the RS-232C data frame.
8 specifies the number of bits as 8 in the RS-232C data frame.
9 specifies the number of bits as 9 in the RS-232C data frame.

delimiter `property` ¶

delimiter: BusBItemRs232cDelimiter

Return the BUS:B<x>:RS232C:DELIMiter command.

Description

This command specifies the delimiting value for a packet on the RS-232 bus.

Usage

Using the .query() method will send the BUS:B<x>:RS232C:DELIMiter? query.
Using the .verify(value) method will send the BUS:B<x>:RS232C:DELIMiter? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:RS232C:DELIMiter value command.

SCPI Syntax

- BUS:B<x>:RS232C:DELIMiter {NULl|LF|CR|SPace|XFF}
- BUS:B<x>:RS232C:DELIMiter?

Info

NULl specifies 0x00.
LF specifies 0x0A.
CR specifies 0x0D.
XFF specifies 0xFF.

displaymode `property` ¶

displaymode: BusBItemRs232cDisplaymode

Return the BUS:B<x>:RS232C:DISplaymode command.

Description

This command specifies the display mode for the RS-232 bus (frame or packet).

Usage

Using the .query() method will send the BUS:B<x>:RS232C:DISplaymode? query.
Using the .verify(value) method will send the BUS:B<x>:RS232C:DISplaymode? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:RS232C:DISplaymode value command.

SCPI Syntax

- BUS:B<x>:RS232C:DISplaymode {FRAme|PACKET}
- BUS:B<x>:RS232C:DISplaymode?

Info

FRAme displays each frame as a single entity.
PACKET displays a group of frames terminated with a single frame defined by the BUS:B<x>:RS232C:DELImiter command or the front panel.

parity `property` ¶

parity: BusBItemRs232cParity

Return the BUS:B<x>:RS232C:PARity command.

Description

This command sets or queries the RS-232C parity for bus , where the bus number is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:RS232C:PARity? query.
Using the .verify(value) method will send the BUS:B<x>:RS232C:PARity? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:RS232C:PARity value command.

SCPI Syntax

- BUS:B<x>:RS232C:PARity {NONe|EVEN|ODD}
- BUS:B<x>:RS232C:PARity?

Info

B<x> is the number of the bus.
NONe specifies no parity.
EVEN specifies even parity.
ODD specifies odd parity.

polarity `property` ¶

polarity: BusBItemRs232cPolarity

Return the BUS:B<x>:RS232C:POLarity command.

Description

This command specifies the polarity for the RS-232C bus.

Usage

Using the .query() method will send the BUS:B<x>:RS232C:POLarity? query.
Using the .verify(value) method will send the BUS:B<x>:RS232C:POLarity? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:RS232C:POLarity value command.

SCPI Syntax

- BUS:B<x>:RS232C:POLarity {NORMal|INVERTed}
- BUS:B<x>:RS232C:POLarity?

Info

NORMal sets the polarity to positive.
INVERTed sets the polarity to negative.

rx `property` ¶

rx: BusBItemRs232cRx

Return the BUS:B<x>:RS232C:RX command tree.

Usage

Using the .query() method will send the BUS:B<x>:RS232C:RX? query.
Using the .verify(value) method will send the BUS:B<x>:RS232C:RX? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.source: The BUS:B<x>:RS232C:RX:SOUrce command.

tx `property` ¶

tx: BusBItemRs232cTx

Return the BUS:B<x>:RS232C:TX command tree.

Usage

Using the .query() method will send the BUS:B<x>:RS232C:TX? query.
Using the .verify(value) method will send the BUS:B<x>:RS232C:TX? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.source: The BUS:B<x>:RS232C:TX:SOUrce command.

BusBItemRs232cBitrate ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:RS232C:BITRate command.

Description

This command specifies the bit rate for the RS-232 bus.

Usage

Using the .query() method will send the BUS:B<x>:RS232C:BITRate? query.
Using the .verify(value) method will send the BUS:B<x>:RS232C:BITRate? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:RS232C:BITRate value command.

SCPI Syntax

- BUS:B<x>:RS232C:BITRate <NR1>
- BUS:B<x>:RS232C:BITRate?

Info

<NR1> is the bit rate in bits-per-second. You can enter any positive integer, and the instrument will coerce the value to the closest supported bit rate.

BusBItemRs232cDatabits ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:RS232C:DATABits command.

Description

This command specifies the number of bits in the data frame for the RS-232 bus.

Usage

Using the .query() method will send the BUS:B<x>:RS232C:DATABits? query.
Using the .verify(value) method will send the BUS:B<x>:RS232C:DATABits? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:RS232C:DATABits value command.

SCPI Syntax

- BUS:B<x>:RS232C:DATABits {7|8|9}
- BUS:B<x>:RS232C:DATABits?

Info

B<x> is the number of the bus.
7 specifies the number of bits as 7 in the RS-232C data frame.
8 specifies the number of bits as 8 in the RS-232C data frame.
9 specifies the number of bits as 9 in the RS-232C data frame.

BusBItemRs232cDelimiter ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:RS232C:DELIMiter command.

Description

This command specifies the delimiting value for a packet on the RS-232 bus.

Usage

Using the .query() method will send the BUS:B<x>:RS232C:DELIMiter? query.
Using the .verify(value) method will send the BUS:B<x>:RS232C:DELIMiter? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:RS232C:DELIMiter value command.

SCPI Syntax

- BUS:B<x>:RS232C:DELIMiter {NULl|LF|CR|SPace|XFF}
- BUS:B<x>:RS232C:DELIMiter?

Info

NULl specifies 0x00.
LF specifies 0x0A.
CR specifies 0x0D.
XFF specifies 0xFF.

BusBItemRs232cDisplaymode ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:RS232C:DISplaymode command.

Description

This command specifies the display mode for the RS-232 bus (frame or packet).

Usage

Using the .query() method will send the BUS:B<x>:RS232C:DISplaymode? query.
Using the .verify(value) method will send the BUS:B<x>:RS232C:DISplaymode? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:RS232C:DISplaymode value command.

SCPI Syntax

- BUS:B<x>:RS232C:DISplaymode {FRAme|PACKET}
- BUS:B<x>:RS232C:DISplaymode?

Info

FRAme displays each frame as a single entity.
PACKET displays a group of frames terminated with a single frame defined by the BUS:B<x>:RS232C:DELImiter command or the front panel.

BusBItemRs232cParity ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:RS232C:PARity command.

Description

This command sets or queries the RS-232C parity for bus , where the bus number is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:RS232C:PARity? query.
Using the .verify(value) method will send the BUS:B<x>:RS232C:PARity? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:RS232C:PARity value command.

SCPI Syntax

- BUS:B<x>:RS232C:PARity {NONe|EVEN|ODD}
- BUS:B<x>:RS232C:PARity?

Info

B<x> is the number of the bus.
NONe specifies no parity.
EVEN specifies even parity.
ODD specifies odd parity.

BusBItemRs232cPolarity ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:RS232C:POLarity command.

Description

This command specifies the polarity for the RS-232C bus.

Usage

Using the .query() method will send the BUS:B<x>:RS232C:POLarity? query.
Using the .verify(value) method will send the BUS:B<x>:RS232C:POLarity? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:RS232C:POLarity value command.

SCPI Syntax

- BUS:B<x>:RS232C:POLarity {NORMal|INVERTed}
- BUS:B<x>:RS232C:POLarity?

Info

NORMal sets the polarity to positive.
INVERTed sets the polarity to negative.

BusBItemRs232cRx ¶

Bases: SCPICmdRead

The BUS:B<x>:RS232C:RX command tree.

Usage

Using the .query() method will send the BUS:B<x>:RS232C:RX? query.
Using the .verify(value) method will send the BUS:B<x>:RS232C:RX? query and raise an AssertionError if the returned value does not match value.

Properties

.source: The BUS:B<x>:RS232C:RX:SOUrce command.

source `property` ¶

source: BusBItemRs232cRxSource

Return the BUS:B<x>:RS232C:RX:SOUrce command.

Description

This command specifies the RX source waveform for the RS-232 bus.

Usage

Using the .query() method will send the BUS:B<x>:RS232C:RX:SOUrce? query.
Using the .verify(value) method will send the BUS:B<x>:RS232C:RX:SOUrce? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:RS232C:RX:SOUrce value command.

SCPI Syntax

- BUS:B<x>:RS232C:RX:SOUrce {CH<x>|D<x>|Off}
- BUS:B<x>:RS232C:RX:SOUrce?

Info

CH<x> specifies an analog channel as the RX source waveform.
D<x> specifies a digital channel as the RX source waveform. (Requires option 3-MSO.).
Off sets the specified bus input to off.

BusBItemRs232cRxSource ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:RS232C:RX:SOUrce command.

Description

This command specifies the RX source waveform for the RS-232 bus.

Usage

Using the .query() method will send the BUS:B<x>:RS232C:RX:SOUrce? query.
Using the .verify(value) method will send the BUS:B<x>:RS232C:RX:SOUrce? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:RS232C:RX:SOUrce value command.

SCPI Syntax

- BUS:B<x>:RS232C:RX:SOUrce {CH<x>|D<x>|Off}
- BUS:B<x>:RS232C:RX:SOUrce?

Info

CH<x> specifies an analog channel as the RX source waveform.
D<x> specifies a digital channel as the RX source waveform. (Requires option 3-MSO.).
Off sets the specified bus input to off.

BusBItemRs232cTx ¶

Bases: SCPICmdRead

The BUS:B<x>:RS232C:TX command tree.

Usage

Using the .query() method will send the BUS:B<x>:RS232C:TX? query.
Using the .verify(value) method will send the BUS:B<x>:RS232C:TX? query and raise an AssertionError if the returned value does not match value.

Properties

.source: The BUS:B<x>:RS232C:TX:SOUrce command.

source `property` ¶

source: BusBItemRs232cTxSource

Return the BUS:B<x>:RS232C:TX:SOUrce command.

Description

This command specifies the TX source waveform for the RS-232 bus.

Usage

Using the .query() method will send the BUS:B<x>:RS232C:TX:SOUrce? query.
Using the .verify(value) method will send the BUS:B<x>:RS232C:TX:SOUrce? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:RS232C:TX:SOUrce value command.

SCPI Syntax

- BUS:B<x>:RS232C:TX:SOUrce {CH<x>|D<x>|Off}
- BUS:B<x>:RS232C:TX:SOUrce?

Info

CH<x> specifies an analog channel as the TX source waveform.
D<x> specifies a digital channel as the TX source waveform. (Requires option 3-MSO.).
Off sets the specified bus input to off.

BusBItemRs232cTxSource ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:RS232C:TX:SOUrce command.

Description

This command specifies the TX source waveform for the RS-232 bus.

Usage

Using the .query() method will send the BUS:B<x>:RS232C:TX:SOUrce? query.
Using the .verify(value) method will send the BUS:B<x>:RS232C:TX:SOUrce? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:RS232C:TX:SOUrce value command.

SCPI Syntax

- BUS:B<x>:RS232C:TX:SOUrce {CH<x>|D<x>|Off}
- BUS:B<x>:RS232C:TX:SOUrce?

Info

CH<x> specifies an analog channel as the TX source waveform.
D<x> specifies a digital channel as the TX source waveform. (Requires option 3-MSO.).
Off sets the specified bus input to off.

BusBItemSpi ¶

Bases: SCPICmdRead

The BUS:B<x>:SPI command tree.

Usage

Using the .query() method will send the BUS:B<x>:SPI? query.
Using the .verify(value) method will send the BUS:B<x>:SPI? query and raise an AssertionError if the returned value does not match value.

Info

B<x> is the number of the bus waveform.

Properties

.bitorder: The BUS:B<x>:SPI:BITOrder command.
.data: The BUS:B<x>:SPI:DATa command tree.
.framing: The BUS:B<x>:SPI:FRAMING command.
.idletime: The BUS:B<x>:SPI:IDLETime command.
.clock: The BUS:B<x>:SPI:CLOCk command tree.
.sclk: The BUS:B<x>:SPI:SCLk command tree.
.select: The BUS:B<x>:SPI:SELect command tree.
.ss: The BUS:B<x>:SPI:SS command tree.

bitorder `property` ¶

bitorder: BusBItemSpiBitorder

Return the BUS:B<x>:SPI:BITOrder command.

Description

This command sets or queries the SPI bit order for the specified bus. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:SPI:BITOrder? query.
Using the .verify(value) method will send the BUS:B<x>:SPI:BITOrder? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:SPI:BITOrder value command.

SCPI Syntax

- BUS:B<x>:SPI:BITOrder {LSB|MSB}
- BUS:B<x>:SPI:BITOrder?

Info

B<x> is the number of the bus waveform.
LSB specifies that each bit becomes the recovered value’s new LSB, after shifting previously recovered bits one place to the left. The decoding happens right to left.
MSB specifies that each successive bit from the bus’s data line becomes the new MSB of the recovered value, shifting any previously recovered bits one place to the right. The decoding happens left to right.

clock `property` ¶

clock: BusBItemSpiClock

Return the BUS:B<x>:SPI:CLOCk command tree.

Usage

Using the .query() method will send the BUS:B<x>:SPI:CLOCk? query.
Using the .verify(value) method will send the BUS:B<x>:SPI:CLOCk? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.polarity: The BUS:B<x>:SPI:CLOCk:POLarity command.
.source: The BUS:B<x>:SPI:CLOCk:SOUrce command.

data `property` ¶

data: BusBItemSpiData

Return the BUS:B<x>:SPI:DATa command tree.

Usage

Using the .query() method will send the BUS:B<x>:SPI:DATa? query.
Using the .verify(value) method will send the BUS:B<x>:SPI:DATa? query and raise an AssertionError if the returned value does not match value.

Info

B<x> is the number of the bus waveform.

Sub-properties

.size: The BUS:B<x>:SPI:DATa:SIZe command.
.in: The BUS:B<x>:SPI:DATa:IN command tree.
.miso: The BUS:B<x>:SPI:DATa:MISO command tree.
.out: The BUS:B<x>:SPI:DATa:OUT command tree.
.mosi: The BUS:B<x>:SPI:DATa:MOSI command tree.

framing `property` ¶

framing: BusBItemSpiFraming

Return the BUS:B<x>:SPI:FRAMING command.

Description

This command specifies the type of framing to use for the SPI bus.

Usage

Using the .query() method will send the BUS:B<x>:SPI:FRAMING? query.
Using the .verify(value) method will send the BUS:B<x>:SPI:FRAMING? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:SPI:FRAMING value command.

SCPI Syntax

- BUS:B<x>:SPI:FRAMING {SS|IDLEtime}
- BUS:B<x>:SPI:FRAMING?

idletime `property` ¶

idletime: BusBItemSpiIdletime

Return the BUS:B<x>:SPI:IDLETime command.

Description

This command sets or queries the SPI idle time for the specified bus. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:SPI:IDLETime? query.
Using the .verify(value) method will send the BUS:B<x>:SPI:IDLETime? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:SPI:IDLETime value command.

SCPI Syntax

- BUS:B<x>:SPI:IDLETime <NR3>
- BUS:B<x>:SPI:IDLETime?

Info

B<x> is the number of the bus waveform.
<NR3> specifies the SPI idle time.

sclk `property` ¶

sclk: BusBItemSpiSclk

Return the BUS:B<x>:SPI:SCLk command tree.

Usage

Using the .query() method will send the BUS:B<x>:SPI:SCLk? query.
Using the .verify(value) method will send the BUS:B<x>:SPI:SCLk? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.polarity: The BUS:B<x>:SPI:SCLk:POLarity command.
.source: The BUS:B<x>:SPI:SCLk:SOUrce command.

select `property` ¶

select: BusBItemSpiSelect

Return the BUS:B<x>:SPI:SELect command tree.

Usage

Using the .query() method will send the BUS:B<x>:SPI:SELect? query.
Using the .verify(value) method will send the BUS:B<x>:SPI:SELect? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.polarity: The BUS:B<x>:SPI:SELect:POLarity command.
.source: The BUS:B<x>:SPI:SELect:SOUrce command.

ss `property` ¶

ss: BusBItemSpiSs

Return the BUS:B<x>:SPI:SS command tree.

Usage

Using the .query() method will send the BUS:B<x>:SPI:SS? query.
Using the .verify(value) method will send the BUS:B<x>:SPI:SS? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.polarity: The BUS:B<x>:SPI:SS:POLarity command.
.source: The BUS:B<x>:SPI:SS:SOUrce command.

BusBItemSpiBitorder ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:SPI:BITOrder command.

Description

This command sets or queries the SPI bit order for the specified bus. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:SPI:BITOrder? query.
Using the .verify(value) method will send the BUS:B<x>:SPI:BITOrder? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:SPI:BITOrder value command.

SCPI Syntax

- BUS:B<x>:SPI:BITOrder {LSB|MSB}
- BUS:B<x>:SPI:BITOrder?

Info

B<x> is the number of the bus waveform.
LSB specifies that each bit becomes the recovered value’s new LSB, after shifting previously recovered bits one place to the left. The decoding happens right to left.
MSB specifies that each successive bit from the bus’s data line becomes the new MSB of the recovered value, shifting any previously recovered bits one place to the right. The decoding happens left to right.

BusBItemSpiClock ¶

Bases: SCPICmdRead

The BUS:B<x>:SPI:CLOCk command tree.

Usage

Using the .query() method will send the BUS:B<x>:SPI:CLOCk? query.
Using the .verify(value) method will send the BUS:B<x>:SPI:CLOCk? query and raise an AssertionError if the returned value does not match value.

Properties

.polarity: The BUS:B<x>:SPI:CLOCk:POLarity command.
.source: The BUS:B<x>:SPI:CLOCk:SOUrce command.

polarity `property` ¶

polarity: BusBItemSpiClockPolarity

Return the BUS:B<x>:SPI:CLOCk:POLarity command.

Description

This command specifies the SCLK polarity for the SPI bus.

Usage

Using the .query() method will send the BUS:B<x>:SPI:CLOCk:POLarity? query.
Using the .verify(value) method will send the BUS:B<x>:SPI:CLOCk:POLarity? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:SPI:CLOCk:POLarity value command.

SCPI Syntax

- BUS:B<x>:SPI:CLOCk:POLarity {FALL|RISe}
- BUS:B<x>:SPI:CLOCk:POLarity?

Info

FALL specifies the SCLK polarity as falling edge.
RISe specifies the SCLK polarity as rising edge.

source `property` ¶

source: BusBItemSpiClockSource

Return the BUS:B<x>:SPI:CLOCk:SOUrce command.

Description

This command specifies the SCLK source waveform for the SPI bus.

Usage

Using the .query() method will send the BUS:B<x>:SPI:CLOCk:SOUrce? query.
Using the .verify(value) method will send the BUS:B<x>:SPI:CLOCk:SOUrce? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:SPI:CLOCk:SOUrce value command.

SCPI Syntax

- BUS:B<x>:SPI:CLOCk:SOUrce {CH<x>|D<x>}
- BUS:B<x>:SPI:CLOCk:SOUrce?

Info

CH<x> specifies an analog channel as the SCLK source waveform.
D<x> specifies a digital channel as the SCLK source waveform. (Requires option 3-MSO.).

BusBItemSpiClockPolarity ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:SPI:CLOCk:POLarity command.

Description

This command specifies the SCLK polarity for the SPI bus.

Usage

Using the .query() method will send the BUS:B<x>:SPI:CLOCk:POLarity? query.
Using the .verify(value) method will send the BUS:B<x>:SPI:CLOCk:POLarity? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:SPI:CLOCk:POLarity value command.

SCPI Syntax

- BUS:B<x>:SPI:CLOCk:POLarity {FALL|RISe}
- BUS:B<x>:SPI:CLOCk:POLarity?

Info

FALL specifies the SCLK polarity as falling edge.
RISe specifies the SCLK polarity as rising edge.

BusBItemSpiClockSource ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:SPI:CLOCk:SOUrce command.

Description

This command specifies the SCLK source waveform for the SPI bus.

Usage

Using the .query() method will send the BUS:B<x>:SPI:CLOCk:SOUrce? query.
Using the .verify(value) method will send the BUS:B<x>:SPI:CLOCk:SOUrce? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:SPI:CLOCk:SOUrce value command.

SCPI Syntax

- BUS:B<x>:SPI:CLOCk:SOUrce {CH<x>|D<x>}
- BUS:B<x>:SPI:CLOCk:SOUrce?

Info

CH<x> specifies an analog channel as the SCLK source waveform.
D<x> specifies a digital channel as the SCLK source waveform. (Requires option 3-MSO.).

BusBItemSpiData ¶

Bases: SCPICmdRead

The BUS:B<x>:SPI:DATa command tree.

Usage

Using the .query() method will send the BUS:B<x>:SPI:DATa? query.
Using the .verify(value) method will send the BUS:B<x>:SPI:DATa? query and raise an AssertionError if the returned value does not match value.

Info

B<x> is the number of the bus waveform.

Properties

.size: The BUS:B<x>:SPI:DATa:SIZe command.
.in: The BUS:B<x>:SPI:DATa:IN command tree.
.miso: The BUS:B<x>:SPI:DATa:MISO command tree.
.out: The BUS:B<x>:SPI:DATa:OUT command tree.
.mosi: The BUS:B<x>:SPI:DATa:MOSI command tree.

in_ `property` ¶

in_: BusBItemSpiDataIn

Return the BUS:B<x>:SPI:DATa:IN command tree.

Usage

Using the .query() method will send the BUS:B<x>:SPI:DATa:IN? query.
Using the .verify(value) method will send the BUS:B<x>:SPI:DATa:IN? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.polarity: The BUS:B<x>:SPI:DATa:IN:POLarity command.
.source: The BUS:B<x>:SPI:DATa:IN:SOUrce command.

miso `property` ¶

miso: BusBItemSpiDataMiso

Return the BUS:B<x>:SPI:DATa:MISO command tree.

Usage

Using the .query() method will send the BUS:B<x>:SPI:DATa:MISO? query.
Using the .verify(value) method will send the BUS:B<x>:SPI:DATa:MISO? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.polarity: The BUS:B<x>:SPI:DATa:MISO:POLarity command.
.source: The BUS:B<x>:SPI:DATa:MISO:SOUrce command.

mosi `property` ¶

mosi: BusBItemSpiDataMosi

Return the BUS:B<x>:SPI:DATa:MOSI command tree.

Usage

Using the .query() method will send the BUS:B<x>:SPI:DATa:MOSI? query.
Using the .verify(value) method will send the BUS:B<x>:SPI:DATa:MOSI? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.polarity: The BUS:B<x>:SPI:DATa:MOSI:POLarity command.
.source: The BUS:B<x>:SPI:DATa:MOSI:SOUrce command.

out `property` ¶

out: BusBItemSpiDataOut

Return the BUS:B<x>:SPI:DATa:OUT command tree.

Usage

Using the .query() method will send the BUS:B<x>:SPI:DATa:OUT? query.
Using the .verify(value) method will send the BUS:B<x>:SPI:DATa:OUT? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.polarity: The BUS:B<x>:SPI:DATa:OUT:POLarity command.
.source: The BUS:B<x>:SPI:DATa:OUT:SOUrce command.

size `property` ¶

size: BusBItemSpiDataSize

Return the BUS:B<x>:SPI:DATa:SIZe command.

Description

This command sets or queries the number of bits per word for the specified SPI bus. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:SPI:DATa:SIZe? query.
Using the .verify(value) method will send the BUS:B<x>:SPI:DATa:SIZe? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:SPI:DATa:SIZe value command.

SCPI Syntax

- BUS:B<x>:SPI:DATa:SIZe <NR1>
- BUS:B<x>:SPI:DATa:SIZe?

Info

B<x> is the number of the bus waveform.
<NR1> is the data size for the specified bus. The minimum value is 2 and maximum is 32.

BusBItemSpiDataIn ¶

Bases: SCPICmdRead

The BUS:B<x>:SPI:DATa:IN command tree.

Usage

Using the .query() method will send the BUS:B<x>:SPI:DATa:IN? query.
Using the .verify(value) method will send the BUS:B<x>:SPI:DATa:IN? query and raise an AssertionError if the returned value does not match value.

Properties

.polarity: The BUS:B<x>:SPI:DATa:IN:POLarity command.
.source: The BUS:B<x>:SPI:DATa:IN:SOUrce command.

polarity `property` ¶

polarity: BusBItemSpiDataInPolarity

Return the BUS:B<x>:SPI:DATa:IN:POLarity command.

Description

This command specifies the MISO polarity for the SPI bus.

Usage

Using the .query() method will send the BUS:B<x>:SPI:DATa:IN:POLarity? query.
Using the .verify(value) method will send the BUS:B<x>:SPI:DATa:IN:POLarity? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:SPI:DATa:IN:POLarity value command.

SCPI Syntax

- BUS:B<x>:SPI:DATa:IN:POLarity {LOW|HIGH}
- BUS:B<x>:SPI:DATa:IN:POLarity?

Info

LOW specifies an active low polarity.
HIGH specifies an active high polarity.

source `property` ¶

source: BusBItemSpiDataInSource

Return the BUS:B<x>:SPI:DATa:IN:SOUrce command.

Description

This command specifies the MISO source waveform for the SPI bus.

Usage

Using the .query() method will send the BUS:B<x>:SPI:DATa:IN:SOUrce? query.
Using the .verify(value) method will send the BUS:B<x>:SPI:DATa:IN:SOUrce? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:SPI:DATa:IN:SOUrce value command.

SCPI Syntax

- BUS:B<x>:SPI:DATa:IN:SOUrce {CH<x>|D<x>}
- BUS:B<x>:SPI:DATa:IN:SOUrce?

Info

CH<x> specifies an analog channel as the MISO source waveform.
D<x> specifies a digital channel as the MISO source waveform. (Requires 3-MSO option.).

BusBItemSpiDataInPolarity ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:SPI:DATa:IN:POLarity command.

Description

This command specifies the MISO polarity for the SPI bus.

Usage

Using the .query() method will send the BUS:B<x>:SPI:DATa:IN:POLarity? query.
Using the .verify(value) method will send the BUS:B<x>:SPI:DATa:IN:POLarity? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:SPI:DATa:IN:POLarity value command.

SCPI Syntax

- BUS:B<x>:SPI:DATa:IN:POLarity {LOW|HIGH}
- BUS:B<x>:SPI:DATa:IN:POLarity?

Info

LOW specifies an active low polarity.
HIGH specifies an active high polarity.

BusBItemSpiDataInSource ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:SPI:DATa:IN:SOUrce command.

Description

This command specifies the MISO source waveform for the SPI bus.

Usage

Using the .query() method will send the BUS:B<x>:SPI:DATa:IN:SOUrce? query.
Using the .verify(value) method will send the BUS:B<x>:SPI:DATa:IN:SOUrce? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:SPI:DATa:IN:SOUrce value command.

SCPI Syntax

- BUS:B<x>:SPI:DATa:IN:SOUrce {CH<x>|D<x>}
- BUS:B<x>:SPI:DATa:IN:SOUrce?

Info

CH<x> specifies an analog channel as the MISO source waveform.
D<x> specifies a digital channel as the MISO source waveform. (Requires 3-MSO option.).

BusBItemSpiDataMiso ¶

Bases: SCPICmdRead

The BUS:B<x>:SPI:DATa:MISO command tree.

Usage

Using the .query() method will send the BUS:B<x>:SPI:DATa:MISO? query.
Using the .verify(value) method will send the BUS:B<x>:SPI:DATa:MISO? query and raise an AssertionError if the returned value does not match value.

Properties

.polarity: The BUS:B<x>:SPI:DATa:MISO:POLarity command.
.source: The BUS:B<x>:SPI:DATa:MISO:SOUrce command.

polarity `property` ¶

polarity: BusBItemSpiDataMisoPolarity

Return the BUS:B<x>:SPI:DATa:MISO:POLarity command.

Description

This command specifies the MISO polarity for the SPI bus.

Usage

Using the .query() method will send the BUS:B<x>:SPI:DATa:MISO:POLarity? query.
Using the .verify(value) method will send the BUS:B<x>:SPI:DATa:MISO:POLarity? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:SPI:DATa:MISO:POLarity value command.

SCPI Syntax

- BUS:B<x>:SPI:DATa:MISO:POLarity {LOW|HIGH}
- BUS:B<x>:SPI:DATa:MISO:POLarity?

Info

LOW specifies an active low polarity.
HIGH specifies an active high polarity.

source `property` ¶

source: BusBItemSpiDataMisoSource

Return the BUS:B<x>:SPI:DATa:MISO:SOUrce command.

Description

This command specifies the MISO source waveform for the SPI bus.

Usage

Using the .query() method will send the BUS:B<x>:SPI:DATa:MISO:SOUrce? query.
Using the .verify(value) method will send the BUS:B<x>:SPI:DATa:MISO:SOUrce? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:SPI:DATa:MISO:SOUrce value command.

SCPI Syntax

- BUS:B<x>:SPI:DATa:MISO:SOUrce {CH<x>|D<x>}
- BUS:B<x>:SPI:DATa:MISO:SOUrce?

Info

CH<x> specifies an analog channel as the MISO source waveform.
D<x> specifies a digital channel as the MISO source waveform. (Requires 3-MSO option.).

BusBItemSpiDataMisoPolarity ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:SPI:DATa:MISO:POLarity command.

Description

This command specifies the MISO polarity for the SPI bus.

Usage

Using the .query() method will send the BUS:B<x>:SPI:DATa:MISO:POLarity? query.
Using the .verify(value) method will send the BUS:B<x>:SPI:DATa:MISO:POLarity? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:SPI:DATa:MISO:POLarity value command.

SCPI Syntax

- BUS:B<x>:SPI:DATa:MISO:POLarity {LOW|HIGH}
- BUS:B<x>:SPI:DATa:MISO:POLarity?

Info

LOW specifies an active low polarity.
HIGH specifies an active high polarity.

BusBItemSpiDataMisoSource ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:SPI:DATa:MISO:SOUrce command.

Description

This command specifies the MISO source waveform for the SPI bus.

Usage

Using the .query() method will send the BUS:B<x>:SPI:DATa:MISO:SOUrce? query.
Using the .verify(value) method will send the BUS:B<x>:SPI:DATa:MISO:SOUrce? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:SPI:DATa:MISO:SOUrce value command.

SCPI Syntax

- BUS:B<x>:SPI:DATa:MISO:SOUrce {CH<x>|D<x>}
- BUS:B<x>:SPI:DATa:MISO:SOUrce?

Info

CH<x> specifies an analog channel as the MISO source waveform.
D<x> specifies a digital channel as the MISO source waveform. (Requires 3-MSO option.).

BusBItemSpiDataMosi ¶

Bases: SCPICmdRead

The BUS:B<x>:SPI:DATa:MOSI command tree.

Usage

Using the .query() method will send the BUS:B<x>:SPI:DATa:MOSI? query.
Using the .verify(value) method will send the BUS:B<x>:SPI:DATa:MOSI? query and raise an AssertionError if the returned value does not match value.

Properties

.polarity: The BUS:B<x>:SPI:DATa:MOSI:POLarity command.
.source: The BUS:B<x>:SPI:DATa:MOSI:SOUrce command.

polarity `property` ¶

polarity: BusBItemSpiDataMosiPolarity

Return the BUS:B<x>:SPI:DATa:MOSI:POLarity command.

Description

This command specifies the MOSI polarity for the SPI bus.

Usage

Using the .query() method will send the BUS:B<x>:SPI:DATa:MOSI:POLarity? query.
Using the .verify(value) method will send the BUS:B<x>:SPI:DATa:MOSI:POLarity? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:SPI:DATa:MOSI:POLarity value command.

SCPI Syntax

- BUS:B<x>:SPI:DATa:MOSI:POLarity {LOW|HIGH}
- BUS:B<x>:SPI:DATa:MOSI:POLarity?

Info

LOW specifies the active low polarity.
HIGH specifies the active high polarity.

source `property` ¶

source: BusBItemSpiDataMosiSource

Return the BUS:B<x>:SPI:DATa:MOSI:SOUrce command.

Description

This command specifies the MOSI source for the SPI bus.

Usage

Using the .query() method will send the BUS:B<x>:SPI:DATa:MOSI:SOUrce? query.
Using the .verify(value) method will send the BUS:B<x>:SPI:DATa:MOSI:SOUrce? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:SPI:DATa:MOSI:SOUrce value command.

SCPI Syntax

- BUS:B<x>:SPI:DATa:MOSI:SOUrce {CH<x>|D<x>}
- BUS:B<x>:SPI:DATa:MOSI:SOUrce?

Info

CH<x> specifies an analog channel as the MOSI source waveform.
D<x> specifies a digital channel as the SPI MOSI source waveform. (Requires option 3-MSO.).

BusBItemSpiDataMosiPolarity ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:SPI:DATa:MOSI:POLarity command.

Description

This command specifies the MOSI polarity for the SPI bus.

Usage

Using the .query() method will send the BUS:B<x>:SPI:DATa:MOSI:POLarity? query.
Using the .verify(value) method will send the BUS:B<x>:SPI:DATa:MOSI:POLarity? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:SPI:DATa:MOSI:POLarity value command.

SCPI Syntax

- BUS:B<x>:SPI:DATa:MOSI:POLarity {LOW|HIGH}
- BUS:B<x>:SPI:DATa:MOSI:POLarity?

Info

LOW specifies the active low polarity.
HIGH specifies the active high polarity.

BusBItemSpiDataMosiSource ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:SPI:DATa:MOSI:SOUrce command.

Description

This command specifies the MOSI source for the SPI bus.

Usage

Using the .query() method will send the BUS:B<x>:SPI:DATa:MOSI:SOUrce? query.
Using the .verify(value) method will send the BUS:B<x>:SPI:DATa:MOSI:SOUrce? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:SPI:DATa:MOSI:SOUrce value command.

SCPI Syntax

- BUS:B<x>:SPI:DATa:MOSI:SOUrce {CH<x>|D<x>}
- BUS:B<x>:SPI:DATa:MOSI:SOUrce?

Info

CH<x> specifies an analog channel as the MOSI source waveform.
D<x> specifies a digital channel as the SPI MOSI source waveform. (Requires option 3-MSO.).

BusBItemSpiDataOut ¶

Bases: SCPICmdRead

The BUS:B<x>:SPI:DATa:OUT command tree.

Usage

Using the .query() method will send the BUS:B<x>:SPI:DATa:OUT? query.
Using the .verify(value) method will send the BUS:B<x>:SPI:DATa:OUT? query and raise an AssertionError if the returned value does not match value.

Properties

.polarity: The BUS:B<x>:SPI:DATa:OUT:POLarity command.
.source: The BUS:B<x>:SPI:DATa:OUT:SOUrce command.

polarity `property` ¶

polarity: BusBItemSpiDataOutPolarity

Return the BUS:B<x>:SPI:DATa:OUT:POLarity command.

Description

This command specifies the MOSI polarity for the SPI bus.

Usage

Using the .query() method will send the BUS:B<x>:SPI:DATa:OUT:POLarity? query.
Using the .verify(value) method will send the BUS:B<x>:SPI:DATa:OUT:POLarity? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:SPI:DATa:OUT:POLarity value command.

SCPI Syntax

- BUS:B<x>:SPI:DATa:OUT:POLarity {LOW|HIGH}
- BUS:B<x>:SPI:DATa:OUT:POLarity?

Info

LOW specifies the active low polarity.
HIGH specifies the active high polarity.

source `property` ¶

source: BusBItemSpiDataOutSource

Return the BUS:B<x>:SPI:DATa:OUT:SOUrce command.

Description

This command specifies the MOSI source for the SPI bus.

Usage

Using the .query() method will send the BUS:B<x>:SPI:DATa:OUT:SOUrce? query.
Using the .verify(value) method will send the BUS:B<x>:SPI:DATa:OUT:SOUrce? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:SPI:DATa:OUT:SOUrce value command.

SCPI Syntax

- BUS:B<x>:SPI:DATa:OUT:SOUrce {CH<x>|D<x>}
- BUS:B<x>:SPI:DATa:OUT:SOUrce?

Info

CH<x> specifies an analog channel as the MOSI source waveform.
D<x> specifies a digital channel as the SPI MOSI source waveform. (Requires option 3-MSO.).

BusBItemSpiDataOutPolarity ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:SPI:DATa:OUT:POLarity command.

Description

This command specifies the MOSI polarity for the SPI bus.

Usage

Using the .query() method will send the BUS:B<x>:SPI:DATa:OUT:POLarity? query.
Using the .verify(value) method will send the BUS:B<x>:SPI:DATa:OUT:POLarity? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:SPI:DATa:OUT:POLarity value command.

SCPI Syntax

- BUS:B<x>:SPI:DATa:OUT:POLarity {LOW|HIGH}
- BUS:B<x>:SPI:DATa:OUT:POLarity?

Info

LOW specifies the active low polarity.
HIGH specifies the active high polarity.

BusBItemSpiDataOutSource ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:SPI:DATa:OUT:SOUrce command.

Description

This command specifies the MOSI source for the SPI bus.

Usage

Using the .query() method will send the BUS:B<x>:SPI:DATa:OUT:SOUrce? query.
Using the .verify(value) method will send the BUS:B<x>:SPI:DATa:OUT:SOUrce? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:SPI:DATa:OUT:SOUrce value command.

SCPI Syntax

- BUS:B<x>:SPI:DATa:OUT:SOUrce {CH<x>|D<x>}
- BUS:B<x>:SPI:DATa:OUT:SOUrce?

Info

CH<x> specifies an analog channel as the MOSI source waveform.
D<x> specifies a digital channel as the SPI MOSI source waveform. (Requires option 3-MSO.).

BusBItemSpiDataSize ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:SPI:DATa:SIZe command.

Description

This command sets or queries the number of bits per word for the specified SPI bus. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:SPI:DATa:SIZe? query.
Using the .verify(value) method will send the BUS:B<x>:SPI:DATa:SIZe? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:SPI:DATa:SIZe value command.

SCPI Syntax

- BUS:B<x>:SPI:DATa:SIZe <NR1>
- BUS:B<x>:SPI:DATa:SIZe?

Info

B<x> is the number of the bus waveform.
<NR1> is the data size for the specified bus. The minimum value is 2 and maximum is 32.

BusBItemSpiFraming ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:SPI:FRAMING command.

Description

This command specifies the type of framing to use for the SPI bus.

Usage

Using the .query() method will send the BUS:B<x>:SPI:FRAMING? query.
Using the .verify(value) method will send the BUS:B<x>:SPI:FRAMING? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:SPI:FRAMING value command.

SCPI Syntax

- BUS:B<x>:SPI:FRAMING {SS|IDLEtime}
- BUS:B<x>:SPI:FRAMING?

BusBItemSpiIdletime ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:SPI:IDLETime command.

Description

This command sets or queries the SPI idle time for the specified bus. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:SPI:IDLETime? query.
Using the .verify(value) method will send the BUS:B<x>:SPI:IDLETime? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:SPI:IDLETime value command.

SCPI Syntax

- BUS:B<x>:SPI:IDLETime <NR3>
- BUS:B<x>:SPI:IDLETime?

Info

B<x> is the number of the bus waveform.
<NR3> specifies the SPI idle time.

BusBItemSpiSclk ¶

Bases: SCPICmdRead

The BUS:B<x>:SPI:SCLk command tree.

Usage

Using the .query() method will send the BUS:B<x>:SPI:SCLk? query.
Using the .verify(value) method will send the BUS:B<x>:SPI:SCLk? query and raise an AssertionError if the returned value does not match value.

Properties

.polarity: The BUS:B<x>:SPI:SCLk:POLarity command.
.source: The BUS:B<x>:SPI:SCLk:SOUrce command.

polarity `property` ¶

polarity: BusBItemSpiSclkPolarity

Return the BUS:B<x>:SPI:SCLk:POLarity command.

Description

This command specifies the SCLK polarity for the SPI bus.

Usage

Using the .query() method will send the BUS:B<x>:SPI:SCLk:POLarity? query.
Using the .verify(value) method will send the BUS:B<x>:SPI:SCLk:POLarity? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:SPI:SCLk:POLarity value command.

SCPI Syntax

- BUS:B<x>:SPI:SCLk:POLarity {FALL|RISe}
- BUS:B<x>:SPI:SCLk:POLarity?

Info

FALL specifies the SCLK polarity as falling edge.
RISe specifies the SCLK polarity as rising edge.

source `property` ¶

source: BusBItemSpiSclkSource

Return the BUS:B<x>:SPI:SCLk:SOUrce command.

Description

This command specifies the SCLK source waveform for the SPI bus.

Usage

Using the .query() method will send the BUS:B<x>:SPI:SCLk:SOUrce? query.
Using the .verify(value) method will send the BUS:B<x>:SPI:SCLk:SOUrce? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:SPI:SCLk:SOUrce value command.

SCPI Syntax

- BUS:B<x>:SPI:SCLk:SOUrce {CH<x>|D<x>}
- BUS:B<x>:SPI:SCLk:SOUrce?

Info

CH<x> specifies an analog channel as the SCLK source waveform.
D<x> specifies a digital channel as the SCLK source waveform. (Requires option 3-MSO.).

BusBItemSpiSclkPolarity ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:SPI:SCLk:POLarity command.

Description

This command specifies the SCLK polarity for the SPI bus.

Usage

Using the .query() method will send the BUS:B<x>:SPI:SCLk:POLarity? query.
Using the .verify(value) method will send the BUS:B<x>:SPI:SCLk:POLarity? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:SPI:SCLk:POLarity value command.

SCPI Syntax

- BUS:B<x>:SPI:SCLk:POLarity {FALL|RISe}
- BUS:B<x>:SPI:SCLk:POLarity?

Info

FALL specifies the SCLK polarity as falling edge.
RISe specifies the SCLK polarity as rising edge.

BusBItemSpiSclkSource ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:SPI:SCLk:SOUrce command.

Description

This command specifies the SCLK source waveform for the SPI bus.

Usage

Using the .query() method will send the BUS:B<x>:SPI:SCLk:SOUrce? query.
Using the .verify(value) method will send the BUS:B<x>:SPI:SCLk:SOUrce? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:SPI:SCLk:SOUrce value command.

SCPI Syntax

- BUS:B<x>:SPI:SCLk:SOUrce {CH<x>|D<x>}
- BUS:B<x>:SPI:SCLk:SOUrce?

Info

CH<x> specifies an analog channel as the SCLK source waveform.
D<x> specifies a digital channel as the SCLK source waveform. (Requires option 3-MSO.).

BusBItemSpiSelect ¶

Bases: SCPICmdRead

The BUS:B<x>:SPI:SELect command tree.

Usage

Using the .query() method will send the BUS:B<x>:SPI:SELect? query.
Using the .verify(value) method will send the BUS:B<x>:SPI:SELect? query and raise an AssertionError if the returned value does not match value.

Properties

.polarity: The BUS:B<x>:SPI:SELect:POLarity command.
.source: The BUS:B<x>:SPI:SELect:SOUrce command.

polarity `property` ¶

polarity: BusBItemSpiSelectPolarity

Return the BUS:B<x>:SPI:SELect:POLarity command.

Description

This command specifies the polarity for the SPI bus.

Usage

Using the .query() method will send the BUS:B<x>:SPI:SELect:POLarity? query.
Using the .verify(value) method will send the BUS:B<x>:SPI:SELect:POLarity? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:SPI:SELect:POLarity value command.

SCPI Syntax

- BUS:B<x>:SPI:SELect:POLarity {LOW|HIGH}
- BUS:B<x>:SPI:SELect:POLarity?

Info

LOW specifies an active low polarity.
HIGH specifies an active high polarity.

source `property` ¶

source: BusBItemSpiSelectSource

Return the BUS:B<x>:SPI:SELect:SOUrce command.

Description

This command specifies the source waveform for the SPI bus.

Usage

Using the .query() method will send the BUS:B<x>:SPI:SELect:SOUrce? query.
Using the .verify(value) method will send the BUS:B<x>:SPI:SELect:SOUrce? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:SPI:SELect:SOUrce value command.

SCPI Syntax

- BUS:B<x>:SPI:SELect:SOUrce {CH<x>|D<x>}
- BUS:B<x>:SPI:SELect:SOUrce?

Info

CH<x> specifies an analog channel as the source waveform.
D<x> specifies a digital channel as the source waveform. (Requires option 3-MSO.).

BusBItemSpiSelectPolarity ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:SPI:SELect:POLarity command.

Description

This command specifies the polarity for the SPI bus.

Usage

Using the .query() method will send the BUS:B<x>:SPI:SELect:POLarity? query.
Using the .verify(value) method will send the BUS:B<x>:SPI:SELect:POLarity? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:SPI:SELect:POLarity value command.

SCPI Syntax

- BUS:B<x>:SPI:SELect:POLarity {LOW|HIGH}
- BUS:B<x>:SPI:SELect:POLarity?

Info

LOW specifies an active low polarity.
HIGH specifies an active high polarity.

BusBItemSpiSelectSource ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:SPI:SELect:SOUrce command.

Description

This command specifies the source waveform for the SPI bus.

Usage

Using the .query() method will send the BUS:B<x>:SPI:SELect:SOUrce? query.
Using the .verify(value) method will send the BUS:B<x>:SPI:SELect:SOUrce? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:SPI:SELect:SOUrce value command.

SCPI Syntax

- BUS:B<x>:SPI:SELect:SOUrce {CH<x>|D<x>}
- BUS:B<x>:SPI:SELect:SOUrce?

Info

CH<x> specifies an analog channel as the source waveform.
D<x> specifies a digital channel as the source waveform. (Requires option 3-MSO.).

BusBItemSpiSs ¶

Bases: SCPICmdRead

The BUS:B<x>:SPI:SS command tree.

Usage

Using the .query() method will send the BUS:B<x>:SPI:SS? query.
Using the .verify(value) method will send the BUS:B<x>:SPI:SS? query and raise an AssertionError if the returned value does not match value.

Properties

.polarity: The BUS:B<x>:SPI:SS:POLarity command.
.source: The BUS:B<x>:SPI:SS:SOUrce command.

polarity `property` ¶

polarity: BusBItemSpiSsPolarity

Return the BUS:B<x>:SPI:SS:POLarity command.

Description

This command specifies the polarity for the SPI bus.

Usage

Using the .query() method will send the BUS:B<x>:SPI:SS:POLarity? query.
Using the .verify(value) method will send the BUS:B<x>:SPI:SS:POLarity? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:SPI:SS:POLarity value command.

SCPI Syntax

- BUS:B<x>:SPI:SS:POLarity {LOW|HIGH}
- BUS:B<x>:SPI:SS:POLarity?

Info

LOW specifies an active low polarity.
HIGH specifies an active high polarity.

source `property` ¶

source: BusBItemSpiSsSource

Return the BUS:B<x>:SPI:SS:SOUrce command.

Description

This command specifies the source waveform for the SPI bus.

Usage

Using the .query() method will send the BUS:B<x>:SPI:SS:SOUrce? query.
Using the .verify(value) method will send the BUS:B<x>:SPI:SS:SOUrce? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:SPI:SS:SOUrce value command.

SCPI Syntax

- BUS:B<x>:SPI:SS:SOUrce {CH<x>|D<x>}
- BUS:B<x>:SPI:SS:SOUrce?

Info

CH<x> specifies an analog channel as the source waveform.
D<x> specifies a digital channel as the source waveform. (Requires option 3-MSO.).

BusBItemSpiSsPolarity ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:SPI:SS:POLarity command.

Description

This command specifies the polarity for the SPI bus.

Usage

Using the .query() method will send the BUS:B<x>:SPI:SS:POLarity? query.
Using the .verify(value) method will send the BUS:B<x>:SPI:SS:POLarity? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:SPI:SS:POLarity value command.

SCPI Syntax

- BUS:B<x>:SPI:SS:POLarity {LOW|HIGH}
- BUS:B<x>:SPI:SS:POLarity?

Info

LOW specifies an active low polarity.
HIGH specifies an active high polarity.

BusBItemSpiSsSource ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:SPI:SS:SOUrce command.

Description

This command specifies the source waveform for the SPI bus.

Usage

Using the .query() method will send the BUS:B<x>:SPI:SS:SOUrce? query.
Using the .verify(value) method will send the BUS:B<x>:SPI:SS:SOUrce? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:SPI:SS:SOUrce value command.

SCPI Syntax

- BUS:B<x>:SPI:SS:SOUrce {CH<x>|D<x>}
- BUS:B<x>:SPI:SS:SOUrce?

Info

CH<x> specifies an analog channel as the source waveform.
D<x> specifies a digital channel as the source waveform. (Requires option 3-MSO.).

BusBItemState ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:STATE command.

Description

This command specifies the on/off state of the bus.

Usage

Using the .query() method will send the BUS:B<x>:STATE? query.
Using the .verify(value) method will send the BUS:B<x>:STATE? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:STATE value command.

SCPI Syntax

- BUS:B<x>:STATE {ON|OFF|<NR1>}
- BUS:B<x>:STATE?

Info

ON or ≠ 0 turns on the bus.
OFF or = 0 turns off the bus.

BusBItemType ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:TYPe command.

Description

This command specifies (or queries) the bus type. The supported bus types are dependent on the oscilloscope model and the installed application models. With the exception of the parallel bus, all bus types require installation of an application option.

Usage

Using the .query() method will send the BUS:B<x>:TYPe? query.
Using the .verify(value) method will send the BUS:B<x>:TYPe? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:TYPe value command.

SCPI Syntax

- BUS:B<x>:TYPe {I2C|SPI|CAN|RS232C|PARallel|USB|LIN|FLEXRay|AUDio|ETHERnet|MIL1553B|ARINC429A}
- BUS:B<x>:TYPe?

Info

I2C specifies the Inter-IC bus.
SPI specifies the Serial Peripheral Interface bus (not available on two-channel models).
CAN specifies the Controller Area Network bus.
RS232C specifies the RS-232C bus.
PARallel specifies the Parallel bus.
USB specifies the USB bus.
LIN specifies the LIN bus.
FLEXRay specifies the FLexRay bus.
AUDio specifies the audio bus.
ETHERnet specifies the Ethernet bus.
MIL1553B specifies the MIL-STD-1553 bus.
ARINC429A specifies the Aeronautical Radio INC (specification 429) bus.

BusBItemUsb ¶

Bases: SCPICmdRead

The BUS:B<x>:USB command tree.

Usage

Using the .query() method will send the BUS:B<x>:USB? query.
Using the .verify(value) method will send the BUS:B<x>:USB? query and raise an AssertionError if the returned value does not match value.

Info

B<x> is the number of the bus waveform.

Properties

.bitrate: The BUS:B<x>:USB:BITRate command.
.probe: The BUS:B<x>:USB:PRObe command.
.source: The BUS:B<x>:USB:SOUrce command tree.

bitrate `property` ¶

bitrate: BusBItemUsbBitrate

Return the BUS:B<x>:USB:BITRate command.

Description

This command specifies the bit rate for the USB bus.

Usage

Using the .query() method will send the BUS:B<x>:USB:BITRate? query.
Using the .verify(value) method will send the BUS:B<x>:USB:BITRate? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:USB:BITRate value command.

SCPI Syntax

- BUS:B<x>:USB:BITRate {LOW|FULL|HIGH}
- BUS:B<x>:USB:BITRate?

Info

B<x> is the number of the bus waveform.
LOW indicates the bit rate is 1.5 Mbps.
FULL indicates the bit rate is 12 Mbps.
HIGH indicates the bit rate is 480 Mbps.

probe `property` ¶

probe: BusBItemUsbProbe

Return the BUS:B<x>:USB:PRObe command.

Description

This command specifies the type of probe connected to the USB bus.

Usage

Using the .query() method will send the BUS:B<x>:USB:PRObe? query.
Using the .verify(value) method will send the BUS:B<x>:USB:PRObe? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:USB:PRObe value command.

SCPI Syntax

- BUS:B<x>:USB:PRObe {DIFFerential|SINGleended}
- BUS:B<x>:USB:PRObe?

Info

B<x> is the number of the bus waveform.
DIFFerential indicates the bus probe is a differential probe.
SINGleended indicates the bus probe is not a differential probe.

source `property` ¶

source: BusBItemUsbSource

Return the BUS:B<x>:USB:SOUrce command tree.

Usage

Using the .query() method will send the BUS:B<x>:USB:SOUrce? query.
Using the .verify(value) method will send the BUS:B<x>:USB:SOUrce? query and raise an AssertionError if the returned value does not match value.

Info

B<x> is the number of the bus waveform.

Sub-properties

.differential: The BUS:B<x>:USB:SOUrce:DIFFerential command.
.dminus: The BUS:B<x>:USB:SOUrce:DMINus command.
.dplus: The BUS:B<x>:USB:SOUrce:DPLUs command.

BusBItemUsbBitrate ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:USB:BITRate command.

Description

This command specifies the bit rate for the USB bus.

Usage

Using the .query() method will send the BUS:B<x>:USB:BITRate? query.
Using the .verify(value) method will send the BUS:B<x>:USB:BITRate? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:USB:BITRate value command.

SCPI Syntax

- BUS:B<x>:USB:BITRate {LOW|FULL|HIGH}
- BUS:B<x>:USB:BITRate?

Info

B<x> is the number of the bus waveform.
LOW indicates the bit rate is 1.5 Mbps.
FULL indicates the bit rate is 12 Mbps.
HIGH indicates the bit rate is 480 Mbps.

BusBItemUsbProbe ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:USB:PRObe command.

Description

This command specifies the type of probe connected to the USB bus.

Usage

Using the .query() method will send the BUS:B<x>:USB:PRObe? query.
Using the .verify(value) method will send the BUS:B<x>:USB:PRObe? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:USB:PRObe value command.

SCPI Syntax

- BUS:B<x>:USB:PRObe {DIFFerential|SINGleended}
- BUS:B<x>:USB:PRObe?

Info

B<x> is the number of the bus waveform.
DIFFerential indicates the bus probe is a differential probe.
SINGleended indicates the bus probe is not a differential probe.

BusBItemUsbSource ¶

Bases: SCPICmdRead

The BUS:B<x>:USB:SOUrce command tree.

Usage

Using the .query() method will send the BUS:B<x>:USB:SOUrce? query.
Using the .verify(value) method will send the BUS:B<x>:USB:SOUrce? query and raise an AssertionError if the returned value does not match value.

Info

B<x> is the number of the bus waveform.

Properties

.differential: The BUS:B<x>:USB:SOUrce:DIFFerential command.
.dminus: The BUS:B<x>:USB:SOUrce:DMINus command.
.dplus: The BUS:B<x>:USB:SOUrce:DPLUs command.

differential `property` ¶

differential: BusBItemUsbSourceDifferential

Return the BUS:B<x>:USB:SOUrce:DIFFerential command.

Description

This command specifies the source waveform for the USB bus when using a differential probe.

Usage

Using the .query() method will send the BUS:B<x>:USB:SOUrce:DIFFerential? query.
Using the .verify(value) method will send the BUS:B<x>:USB:SOUrce:DIFFerential? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:USB:SOUrce:DIFFerential value command.

SCPI Syntax

- BUS:B<x>:USB:SOUrce:DIFFerential {CH<x>|MATH|REF<x>}
- BUS:B<x>:USB:SOUrce:DIFFerential?

Info

B<x> is the number of the bus waveform.
CH<x> specifies an analog waveform as the source. This channel should have an attached differential probe.
MATH specifies the math waveform as the source.
REF<x> specifies a reference waveform as the source.

dminus `property` ¶

dminus: BusBItemUsbSourceDminus

Return the BUS:B<x>:USB:SOUrce:DMINus command.

Description

This command specifies the source for the USB bus D- input. If you are using single-ended probes, you need to set the sources for both the D+ and D- inputs.

Usage

Using the .query() method will send the BUS:B<x>:USB:SOUrce:DMINus? query.
Using the .verify(value) method will send the BUS:B<x>:USB:SOUrce:DMINus? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:USB:SOUrce:DMINus value command.

SCPI Syntax

- BUS:B<x>:USB:SOUrce:DMINus {CH<x>|D<x>}
- BUS:B<x>:USB:SOUrce:DMINus?

Info

CH<x> specifies an analog channel as the source waveform for the D- input.
D<x> specifies a digital channel as the source waveform for the D- input. (Requires option 3-MSO.).

dplus `property` ¶

dplus: BusBItemUsbSourceDplus

Return the BUS:B<x>:USB:SOUrce:DPLUs command.

Description

This command specifies the source for the USB D+ input. If you are using single-ended probes, you need to set the sources for both the D+ and D- inputs.

Usage

Using the .query() method will send the BUS:B<x>:USB:SOUrce:DPLUs? query.
Using the .verify(value) method will send the BUS:B<x>:USB:SOUrce:DPLUs? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:USB:SOUrce:DPLUs value command.

SCPI Syntax

- BUS:B<x>:USB:SOUrce:DPLUs {CH<x>|D<x>}
- BUS:B<x>:USB:SOUrce:DPLUs?

Info

CH<x> specifies an analog channel as the source waveform for D+ input.
D<x> specifies a digital channel as the source waveform for D+ input. (Requires option 3-MSO.).

BusBItemUsbSourceDifferential ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:USB:SOUrce:DIFFerential command.

Description

This command specifies the source waveform for the USB bus when using a differential probe.

Usage

Using the .query() method will send the BUS:B<x>:USB:SOUrce:DIFFerential? query.
Using the .verify(value) method will send the BUS:B<x>:USB:SOUrce:DIFFerential? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:USB:SOUrce:DIFFerential value command.

SCPI Syntax

- BUS:B<x>:USB:SOUrce:DIFFerential {CH<x>|MATH|REF<x>}
- BUS:B<x>:USB:SOUrce:DIFFerential?

Info

B<x> is the number of the bus waveform.
CH<x> specifies an analog waveform as the source. This channel should have an attached differential probe.
MATH specifies the math waveform as the source.
REF<x> specifies a reference waveform as the source.

BusBItemUsbSourceDminus ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:USB:SOUrce:DMINus command.

Description

This command specifies the source for the USB bus D- input. If you are using single-ended probes, you need to set the sources for both the D+ and D- inputs.

Usage

Using the .query() method will send the BUS:B<x>:USB:SOUrce:DMINus? query.
Using the .verify(value) method will send the BUS:B<x>:USB:SOUrce:DMINus? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:USB:SOUrce:DMINus value command.

SCPI Syntax

- BUS:B<x>:USB:SOUrce:DMINus {CH<x>|D<x>}
- BUS:B<x>:USB:SOUrce:DMINus?

Info

CH<x> specifies an analog channel as the source waveform for the D- input.
D<x> specifies a digital channel as the source waveform for the D- input. (Requires option 3-MSO.).

BusBItemUsbSourceDplus ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:USB:SOUrce:DPLUs command.

Description

This command specifies the source for the USB D+ input. If you are using single-ended probes, you need to set the sources for both the D+ and D- inputs.

Usage

Using the .query() method will send the BUS:B<x>:USB:SOUrce:DPLUs? query.
Using the .verify(value) method will send the BUS:B<x>:USB:SOUrce:DPLUs? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:USB:SOUrce:DPLUs value command.

SCPI Syntax

- BUS:B<x>:USB:SOUrce:DPLUs {CH<x>|D<x>}
- BUS:B<x>:USB:SOUrce:DPLUs?

Info

CH<x> specifies an analog channel as the source waveform for D+ input.
D<x> specifies a digital channel as the source waveform for D+ input. (Requires option 3-MSO.).

BusLowerthreshold ¶

Bases: SCPICmdRead

The BUS:LOWerthreshold command tree.

Usage

Using the .query() method will send the BUS:LOWerthreshold? query.
Using the .verify(value) method will send the BUS:LOWerthreshold? query and raise an AssertionError if the returned value does not match value.

Properties

.ch: The BUS:LOWerthreshold:CH<x> command.
.ref: The BUS:LOWerthreshold:REF<x> command.
.math: The BUS:LOWerthreshold:MATH command.
.math1: The BUS:LOWerthreshold:MATH1 command.

ch `property` ¶

ch: dict[int, BusLowerthresholdChannel]

Return the BUS:LOWerthreshold:CH<x> command.

Description

This command sets the lower threshold for each channel. This applies to all search and trigger types that use the channel.

Usage

Using the .query() method will send the BUS:LOWerthreshold:CH<x>? query.
Using the .verify(value) method will send the BUS:LOWerthreshold:CH<x>? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:LOWerthreshold:CH<x> value command.

SCPI Syntax

- BUS:LOWerthreshold:CH<x> {<NR3>|ECL|TTL}
- BUS:LOWerthreshold:CH<x>?

Info

<NR3> is a floating point number that specifies the threshold, in volts.
ECL specifies a preset ECL high level of -1.3V.
TTL specifies a preset TTL high level of 1.4V.

math `property` ¶

math: BusLowerthresholdMath

Return the BUS:LOWerthreshold:MATH command.

Description

This command specifies the lower threshold for the math waveform. This will apply to all search and trigger types that use the math waveform.

Usage

Using the .query() method will send the BUS:LOWerthreshold:MATH? query.
Using the .verify(value) method will send the BUS:LOWerthreshold:MATH? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:LOWerthreshold:MATH value command.

SCPI Syntax

- BUS:LOWerthreshold:MATH {<NR3>|ECL|TTL}
- BUS:LOWerthreshold:MATH?

Info

<NR3> is a floating point number that specifies the lower threshold for the reference waveform, in volts.
ECL - ECL (-1.3 volts). Note that this setting is constrained, depending upon the vertical scale of the specified math waveform.
TTL - TTL (1.4 volts). Note that this setting is constrained, depending upon the vertical scale of the specified math waveform.

math1 `property` ¶

math1: BusLowerthresholdMath1

Return the BUS:LOWerthreshold:MATH1 command.

Description

This command specifies the lower threshold for the math waveform. This will apply to all search and trigger types that use the math waveform.

Usage

Using the .query() method will send the BUS:LOWerthreshold:MATH1? query.
Using the .verify(value) method will send the BUS:LOWerthreshold:MATH1? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:LOWerthreshold:MATH1 value command.

SCPI Syntax

- BUS:LOWerthreshold:MATH1 {<NR3>|ECL|TTL}
- BUS:LOWerthreshold:MATH1?

Info

<NR3> is a floating point number that specifies the lower threshold for the reference waveform, in volts.
ECL - ECL (-1.3 volts). Note that this setting is constrained, depending upon the vertical scale of the specified math waveform.
TTL - TTL (1.4 volts). Note that this setting is constrained, depending upon the vertical scale of the specified math waveform.

ref `property` ¶

ref: dict[int, BusLowerthresholdRefItem]

Return the BUS:LOWerthreshold:REF<x> command.

Description

This command sets the lower threshold for each reference waveform. This applies to all search and trigger types that use that reference waveform.

Usage

Using the .query() method will send the BUS:LOWerthreshold:REF<x>? query.
Using the .verify(value) method will send the BUS:LOWerthreshold:REF<x>? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:LOWerthreshold:REF<x> value command.

SCPI Syntax

- BUS:LOWerthreshold:REF<x> {<NR3>|ECL|TTL}
- BUS:LOWerthreshold:REF<x>?

Info

<NR3> is a floating point number that specifies the lower threshold for the reference waveform, in volts.
ECL - ECL (-1.3 volts). Note that this setting is constrained, depending upon the vertical scale for the specified reference waveform.
TTL - TTL (1.4 volts). Note that this setting is constrained, depending upon the vertical scale for the specified reference waveform.

BusLowerthresholdChannel ¶

Bases: ValidatedChannel, SCPICmdWrite, SCPICmdRead

The BUS:LOWerthreshold:CH<x> command.

Description

This command sets the lower threshold for each channel. This applies to all search and trigger types that use the channel.

Usage

Using the .query() method will send the BUS:LOWerthreshold:CH<x>? query.
Using the .verify(value) method will send the BUS:LOWerthreshold:CH<x>? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:LOWerthreshold:CH<x> value command.

SCPI Syntax

- BUS:LOWerthreshold:CH<x> {<NR3>|ECL|TTL}
- BUS:LOWerthreshold:CH<x>?

Info

<NR3> is a floating point number that specifies the threshold, in volts.
ECL specifies a preset ECL high level of -1.3V.
TTL specifies a preset TTL high level of 1.4V.

BusLowerthresholdMath ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:LOWerthreshold:MATH command.

Description

This command specifies the lower threshold for the math waveform. This will apply to all search and trigger types that use the math waveform.

Usage

Using the .query() method will send the BUS:LOWerthreshold:MATH? query.
Using the .verify(value) method will send the BUS:LOWerthreshold:MATH? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:LOWerthreshold:MATH value command.

SCPI Syntax

- BUS:LOWerthreshold:MATH {<NR3>|ECL|TTL}
- BUS:LOWerthreshold:MATH?

Info

<NR3> is a floating point number that specifies the lower threshold for the reference waveform, in volts.
ECL - ECL (-1.3 volts). Note that this setting is constrained, depending upon the vertical scale of the specified math waveform.
TTL - TTL (1.4 volts). Note that this setting is constrained, depending upon the vertical scale of the specified math waveform.

BusLowerthresholdMath1 ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:LOWerthreshold:MATH1 command.

Description

This command specifies the lower threshold for the math waveform. This will apply to all search and trigger types that use the math waveform.

Usage

Using the .query() method will send the BUS:LOWerthreshold:MATH1? query.
Using the .verify(value) method will send the BUS:LOWerthreshold:MATH1? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:LOWerthreshold:MATH1 value command.

SCPI Syntax

- BUS:LOWerthreshold:MATH1 {<NR3>|ECL|TTL}
- BUS:LOWerthreshold:MATH1?

Info

<NR3> is a floating point number that specifies the lower threshold for the reference waveform, in volts.
ECL - ECL (-1.3 volts). Note that this setting is constrained, depending upon the vertical scale of the specified math waveform.
TTL - TTL (1.4 volts). Note that this setting is constrained, depending upon the vertical scale of the specified math waveform.

BusLowerthresholdRefItem ¶

Bases: ValidatedDynamicNumberCmd, SCPICmdWrite, SCPICmdRead

The BUS:LOWerthreshold:REF<x> command.

Description

This command sets the lower threshold for each reference waveform. This applies to all search and trigger types that use that reference waveform.

Usage

Using the .query() method will send the BUS:LOWerthreshold:REF<x>? query.
Using the .verify(value) method will send the BUS:LOWerthreshold:REF<x>? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:LOWerthreshold:REF<x> value command.

SCPI Syntax

- BUS:LOWerthreshold:REF<x> {<NR3>|ECL|TTL}
- BUS:LOWerthreshold:REF<x>?

Info

<NR3> is a floating point number that specifies the lower threshold for the reference waveform, in volts.
ECL - ECL (-1.3 volts). Note that this setting is constrained, depending upon the vertical scale for the specified reference waveform.
TTL - TTL (1.4 volts). Note that this setting is constrained, depending upon the vertical scale for the specified reference waveform.

BusThreshold ¶

Bases: SCPICmdRead

The BUS:THReshold command tree.

Usage

Using the .query() method will send the BUS:THReshold? query.
Using the .verify(value) method will send the BUS:THReshold? query and raise an AssertionError if the returned value does not match value.

Properties

.ch: The BUS:THReshold:CH<x> command.
.d: The BUS:THReshold:D<x> command.

ch `property` ¶

ch: dict[int, BusThresholdChannel]

Return the BUS:THReshold:CH<x> command.

Description

This command specifies the threshold for analog channel , where x is the channel number (1-4). This setting applies to all trigger types that use the channel.

Usage

Using the .query() method will send the BUS:THReshold:CH<x>? query.
Using the .verify(value) method will send the BUS:THReshold:CH<x>? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:THReshold:CH<x> value command.

SCPI Syntax

- BUS:THReshold:CH<x> {ECL|TTL|<NR3>}
- BUS:THReshold:CH<x>?

Info

ECL specifies a preset ECL high level of -1.3V.
TTL specifies a TTL preset high level of 1.4V.
<NR3> is a floating point number that specifies the threshold level, in volts.

d `property` ¶

d: dict[int, BusThresholdDigitalBit]

Return the BUS:THReshold:D<x> command.

Description

This command specifies the threshold for digital channel , where x is the digital channel number (0-15). This will apply to all Search and Trigger Types that use the channel.

Usage

Using the .query() method will send the BUS:THReshold:D<x>? query.
Using the .verify(value) method will send the BUS:THReshold:D<x>? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:THReshold:D<x> value command.

SCPI Syntax

- BUS:THReshold:D<x> {<NR3>|ECL|TTL}
- BUS:THReshold:D<x>?

Info

ECL specifies a preset ECL high level of -1.3V.
TTL specifies a preset TTL high level of 1.4V.
<NR3> is a floating point number that specifies the threshold level, in volts.

BusThresholdChannel ¶

Bases: ValidatedChannel, SCPICmdWrite, SCPICmdRead

The BUS:THReshold:CH<x> command.

Description

This command specifies the threshold for analog channel , where x is the channel number (1-4). This setting applies to all trigger types that use the channel.

Usage

Using the .query() method will send the BUS:THReshold:CH<x>? query.
Using the .verify(value) method will send the BUS:THReshold:CH<x>? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:THReshold:CH<x> value command.

SCPI Syntax

- BUS:THReshold:CH<x> {ECL|TTL|<NR3>}
- BUS:THReshold:CH<x>?

Info

ECL specifies a preset ECL high level of -1.3V.
TTL specifies a TTL preset high level of 1.4V.
<NR3> is a floating point number that specifies the threshold level, in volts.

BusThresholdDigitalBit ¶

Bases: ValidatedDigitalBit, SCPICmdWrite, SCPICmdRead

The BUS:THReshold:D<x> command.

Description

This command specifies the threshold for digital channel , where x is the digital channel number (0-15). This will apply to all Search and Trigger Types that use the channel.

Usage

Using the .query() method will send the BUS:THReshold:D<x>? query.
Using the .verify(value) method will send the BUS:THReshold:D<x>? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:THReshold:D<x> value command.

SCPI Syntax

- BUS:THReshold:D<x> {<NR3>|ECL|TTL}
- BUS:THReshold:D<x>?

Info

ECL specifies a preset ECL high level of -1.3V.
TTL specifies a preset TTL high level of 1.4V.
<NR3> is a floating point number that specifies the threshold level, in volts.

BusUpperthreshold ¶

Bases: SCPICmdRead

The BUS:UPPerthreshold command tree.

Usage

Using the .query() method will send the BUS:UPPerthreshold? query.
Using the .verify(value) method will send the BUS:UPPerthreshold? query and raise an AssertionError if the returned value does not match value.

Properties

.ch: The BUS:UPPerthreshold:CH<x> command.
.ref: The BUS:UPPerthreshold:REF<x> command.
.math: The BUS:UPPerthreshold:MATH command.
.math1: The BUS:UPPerthreshold:MATH1 command.

ch `property` ¶

ch: dict[int, BusUpperthresholdChannel]

Return the BUS:UPPerthreshold:CH<x> command.

Description

Sets the upper threshold for each analog channel (1-4). This applies to all search and trigger types that use the channel.

Usage

Using the .query() method will send the BUS:UPPerthreshold:CH<x>? query.
Using the .verify(value) method will send the BUS:UPPerthreshold:CH<x>? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:UPPerthreshold:CH<x> value command.

SCPI Syntax

- BUS:UPPerthreshold:CH<x> {<NR3>|ECL|TTL}
- BUS:UPPerthreshold:CH<x>?

Info

<NR3> is a floating point number that specifies the threshold, in volts.
ECL specifies a preset ECL high level of -1.3V.
TTL specifies a preset TTL high level of 1.4V.

math `property` ¶

math: BusUpperthresholdMath

Return the BUS:UPPerthreshold:MATH command.

Description

This command specifies the upper threshold of the math waveform. This will apply to all search and trigger types that use the math waveform.

Usage

Using the .query() method will send the BUS:UPPerthreshold:MATH? query.
Using the .verify(value) method will send the BUS:UPPerthreshold:MATH? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:UPPerthreshold:MATH value command.

SCPI Syntax

- BUS:UPPerthreshold:MATH {<NR3>|ECL|TTL}
- BUS:UPPerthreshold:MATH?

Info

<NR3> is a floating point number that specifies the upper threshold of the math waveform, in volts.
ECL - ECL (-1.3 volts). Note that this setting is constrained, depending upon the vertical scale for the specified math waveform.
TTL - TTL (1.4 volts). Note that this setting is constrained, depending upon the vertical scale for the specified math waveform.

math1 `property` ¶

math1: BusUpperthresholdMath1

Return the BUS:UPPerthreshold:MATH1 command.

Description

This command specifies the upper threshold of the math waveform. This will apply to all search and trigger types that use the math waveform.

Usage

Using the .query() method will send the BUS:UPPerthreshold:MATH1? query.
Using the .verify(value) method will send the BUS:UPPerthreshold:MATH1? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:UPPerthreshold:MATH1 value command.

SCPI Syntax

- BUS:UPPerthreshold:MATH1 {<NR3>|ECL|TTL}
- BUS:UPPerthreshold:MATH1?

Info

<NR3> is a floating point number that specifies the upper threshold of the math waveform, in volts.
ECL - ECL (-1.3 volts). Note that this setting is constrained, depending upon the vertical scale for the specified math waveform.
TTL - TTL (1.4 volts). Note that this setting is constrained, depending upon the vertical scale for the specified math waveform.

ref `property` ¶

ref: dict[int, BusUpperthresholdRefItem]

Return the BUS:UPPerthreshold:REF<x> command.

Description

This command sets the upper threshold for each reference waveform. This applies to all search and trigger types that use that reference waveform.

Usage

Using the .query() method will send the BUS:UPPerthreshold:REF<x>? query.
Using the .verify(value) method will send the BUS:UPPerthreshold:REF<x>? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:UPPerthreshold:REF<x> value command.

SCPI Syntax

- BUS:UPPerthreshold:REF<x> {<NR3>|ECL|TTL}
- BUS:UPPerthreshold:REF<x>?

Info

<NR3> is a floating point number that specifies the upper threshold for the reference waveform, in volts.
ECL - ECL (-1.3 volts). Note that this setting is constrained, depending upon the vertical scale for the specified reference waveform.
TTL - TTL (1.4 volts). Note that this setting is constrained, depending upon the vertical scale for the specified reference waveform.

BusUpperthresholdChannel ¶

Bases: ValidatedChannel, SCPICmdWrite, SCPICmdRead

The BUS:UPPerthreshold:CH<x> command.

Description

Sets the upper threshold for each analog channel (1-4). This applies to all search and trigger types that use the channel.

Usage

Using the .query() method will send the BUS:UPPerthreshold:CH<x>? query.
Using the .verify(value) method will send the BUS:UPPerthreshold:CH<x>? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:UPPerthreshold:CH<x> value command.

SCPI Syntax

- BUS:UPPerthreshold:CH<x> {<NR3>|ECL|TTL}
- BUS:UPPerthreshold:CH<x>?

Info

<NR3> is a floating point number that specifies the threshold, in volts.
ECL specifies a preset ECL high level of -1.3V.
TTL specifies a preset TTL high level of 1.4V.

BusUpperthresholdMath ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:UPPerthreshold:MATH command.

Description

This command specifies the upper threshold of the math waveform. This will apply to all search and trigger types that use the math waveform.

Usage

Using the .query() method will send the BUS:UPPerthreshold:MATH? query.
Using the .verify(value) method will send the BUS:UPPerthreshold:MATH? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:UPPerthreshold:MATH value command.

SCPI Syntax

- BUS:UPPerthreshold:MATH {<NR3>|ECL|TTL}
- BUS:UPPerthreshold:MATH?

Info

<NR3> is a floating point number that specifies the upper threshold of the math waveform, in volts.
ECL - ECL (-1.3 volts). Note that this setting is constrained, depending upon the vertical scale for the specified math waveform.
TTL - TTL (1.4 volts). Note that this setting is constrained, depending upon the vertical scale for the specified math waveform.

BusUpperthresholdMath1 ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:UPPerthreshold:MATH1 command.

Description

This command specifies the upper threshold of the math waveform. This will apply to all search and trigger types that use the math waveform.

Usage

Using the .query() method will send the BUS:UPPerthreshold:MATH1? query.
Using the .verify(value) method will send the BUS:UPPerthreshold:MATH1? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:UPPerthreshold:MATH1 value command.

SCPI Syntax

- BUS:UPPerthreshold:MATH1 {<NR3>|ECL|TTL}
- BUS:UPPerthreshold:MATH1?

Info

<NR3> is a floating point number that specifies the upper threshold of the math waveform, in volts.
ECL - ECL (-1.3 volts). Note that this setting is constrained, depending upon the vertical scale for the specified math waveform.
TTL - TTL (1.4 volts). Note that this setting is constrained, depending upon the vertical scale for the specified math waveform.

BusUpperthresholdRefItem ¶

Bases: ValidatedDynamicNumberCmd, SCPICmdWrite, SCPICmdRead

The BUS:UPPerthreshold:REF<x> command.

Description

This command sets the upper threshold for each reference waveform. This applies to all search and trigger types that use that reference waveform.

Usage

Using the .query() method will send the BUS:UPPerthreshold:REF<x>? query.
Using the .verify(value) method will send the BUS:UPPerthreshold:REF<x>? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:UPPerthreshold:REF<x> value command.

SCPI Syntax

- BUS:UPPerthreshold:REF<x> {<NR3>|ECL|TTL}
- BUS:UPPerthreshold:REF<x>?

Info

<NR3> is a floating point number that specifies the upper threshold for the reference waveform, in volts.
ECL - ECL (-1.3 volts). Note that this setting is constrained, depending upon the vertical scale for the specified reference waveform.
TTL - TTL (1.4 volts). Note that this setting is constrained, depending upon the vertical scale for the specified reference waveform.

bus ¶

Bus ¶

b property ¶

lowerthreshold property ¶

threshold property ¶

upperthreshold property ¶

BusBItem ¶

arinc429a property ¶

audio property ¶

can property ¶

display property ¶

ethernet property ¶

flexray property ¶

i2c property ¶

label property ¶

lin property ¶

mil1553b property ¶

parallel property ¶

position property ¶

rs232c property ¶

spi property ¶

state property ¶

type property ¶

usb property ¶

BusBItemArinc429a ¶

bitrate property ¶

data property ¶

polarity property ¶

source property ¶

BusBItemArinc429aBitrate ¶

BusBItemArinc429aData ¶

format property ¶

BusBItemArinc429aDataFormat ¶

BusBItemArinc429aPolarity ¶

BusBItemArinc429aSource ¶

BusBItemAudio ¶

bitdelay property ¶

bitorder property ¶

channel property ¶

clock property ¶

data property ¶

display property ¶

frame property ¶

framesync property ¶

type property ¶

wordsel property ¶

BusBItemAudioBitdelay ¶

BusBItemAudioBitorder ¶

BusBItemAudioChannel ¶

size property ¶

BusBItemAudioChannelSize ¶

BusBItemAudioClock ¶

polarity property ¶

source property ¶

BusBItemAudioClockPolarity ¶

BusBItemAudioClockSource ¶

BusBItemAudioData ¶

polarity property ¶

size property ¶

source property ¶

BusBItemAudioDataPolarity ¶

BusBItemAudioDataSize ¶

BusBItemAudioDataSource ¶

BusBItemAudioDisplay ¶

format property ¶

BusBItemAudioDisplayFormat ¶

BusBItemAudioFrame ¶

size property ¶

BusBItemAudioFrameSize ¶

BusBItemAudioFramesync ¶

polarity property ¶

source property ¶

BusBItemAudioFramesyncPolarity ¶

BusBItemAudioFramesyncSource ¶

BusBItemAudioType ¶

BusBItemAudioWordsel ¶

polarity property ¶

source property ¶

BusBItemAudioWordselPolarity ¶

BusBItemAudioWordselSource ¶

b `property` ¶

lowerthreshold `property` ¶

threshold `property` ¶

upperthreshold `property` ¶

arinc429a `property` ¶

audio `property` ¶

can `property` ¶

display `property` ¶

ethernet `property` ¶

flexray `property` ¶

i2c `property` ¶

label `property` ¶

lin `property` ¶

mil1553b `property` ¶

parallel `property` ¶

position `property` ¶

rs232c `property` ¶

spi `property` ¶

state `property` ¶

type `property` ¶

usb `property` ¶

bitrate `property` ¶

data `property` ¶

polarity `property` ¶

source `property` ¶

format `property` ¶

bitdelay `property` ¶

bitorder `property` ¶

channel `property` ¶

clock `property` ¶

data `property` ¶

display `property` ¶

frame `property` ¶

framesync `property` ¶

type `property` ¶

wordsel `property` ¶

size `property` ¶

polarity `property` ¶

source `property` ¶

polarity `property` ¶

size `property` ¶

source `property` ¶

format `property` ¶

size `property` ¶

polarity `property` ¶

source `property` ¶

polarity `property` ¶

source `property` ¶

bitrate `property` ¶

fd `property` ¶

probe `property` ¶

samplepoint `property` ¶

source `property` ¶

standard `property` ¶

bitrate `property` ¶

standard `property` ¶

format `property` ¶

type `property` ¶

probe `property` ¶

protocol `property` ¶

source `property` ¶

type `property` ¶

differential `property` ¶

dminus `property` ¶

bitrate `property` ¶

channel `property` ¶

signal `property` ¶

source `property` ¶

address `property` ¶

clock `property` ¶

data `property` ¶

sclk `property` ¶

sdata `property` ¶

rwinclude `property` ¶

source `property` ¶

source `property` ¶

source `property` ¶

source `property` ¶

bitrate `property` ¶

idformat `property` ¶