save_and_recall ¶

The save_and_recall commands module.

These commands are used in the following models: DPO5K, DPO5KB, DPO70KC, DPO70KD, DPO70KDX, DPO70KSX, DPO7K, DPO7KC, DSA70KC, DSA70KD, MSO5K, MSO5KB, MSO70KC, MSO70KDX

THIS FILE IS AUTO-GENERATED, IT SHOULD NOT BE MANUALLY MODIFIED.

Please report an issue if one is found.

Commands and Queries

- *SDS <NR1>

Sds ¶

Bases: SCPICmdWrite

The *SDS command.

Description

This command (no query form) changes the specified setup to reference the factory setup instead of the specific user setup slot. The content of the setup slot is unchanged, but the data will no longer be accessible to you. This command is equivalent to selecting Delete from the File menu, and then choosing the specified setup.

Usage

Using the .write(value) method will send the *SDS value command.

SCPI Syntax

- *SDS <NR1>

Info

<NR1> specifies a user setup location to delete. Setup storage location values range from 1 through 10; using an out-of-range value causes an error.