[python source code]

autoset

The autoset commands module.

These commands are used in the following models: DPO5K, DPO5KB, DPO70KC, DPO70KD, DPO70KDX, DPO70KSX, DPO7K, DPO7KC, DSA70KC, DSA70KD, MSO5K, MSO5KB, MSO70KC, MSO70KDX

THIS FILE IS AUTO-GENERATED, IT SHOULD NOT BE MANUALLY MODIFIED.

Please report an issue if one is found.

Commands and Queries 
- AUTOSet {EXECute|UNDo|VFields|VIDeo|VLines}
- AUTOSet:OVErlay {ON|OFF}
- AUTOSet:PERcent <NR3>

Autoset

Bases: SCPICmdWrite, SCPICmdRead

The AUTOSet command.

Description
  • This command (no query format) sets the vertical, horizontal, and trigger controls of the instrument to automatically acquire and display the selected waveform. (To autoset a video waveform, the video trigger must be set to video standard, not custom. Video arguments require video hardware.) This is equivalent to pressing the front panel AUTOSET button. For a detailed description of autoset functionality, see Autoset in the index of the online help for your instrument.
Usage
  • Using the .write(value) method will send the AUTOSet value command.
SCPI Syntax 
- AUTOSet {EXECute|UNDo|VFields|VIDeo|VLines}
Info
  • EXECute runs the autoset routine; this is equivalent to pressing the front panel AUTOSET button. If the display is set to a PAL, MV, or IRE graticule, this argument forces the graticule display to full mode (frame, grid, and cross hair).
  • UNDo returns the instrument to the setting prior to executing an autoset.
  • VFields autosets the displayed waveform.
  • VIDeo autosets the displayed waveform.
  • VLines autosets the displayed waveform.
Properties
  • .overlay: The AUTOSet:OVErlay command.
  • .percent: The AUTOSet:PERcent command.

overlay property 

overlay: AutosetOverlay

Return the AUTOSet:OVErlay command.

Description
  • Sets or queries the autoset overlay feature. If Autoset Overlay is turned on, Autoset will place all signals center vertically on-screen with the vertical settings on each channel configured so that the amplitude of the signal occupies n divisions = Percent/10 divisions.
Usage
  • Using the .write(value) method will send the AUTOSet:OVErlay value command.
SCPI Syntax 
- AUTOSet:OVErlay {ON|OFF}

percent property 

percent: AutosetPercent

Return the AUTOSet:PERcent command.

Description
  • Sets or queries the percent of the full vertical scale that the signal should cover after Autoset is run when Overlay is turned on.
Usage
  • Using the .write(value) method will send the AUTOSet:PERcent value command.
SCPI Syntax 
- AUTOSet:PERcent <NR3>

AutosetOverlay

Bases: SCPICmdWrite

The AUTOSet:OVErlay command.

Description
  • Sets or queries the autoset overlay feature. If Autoset Overlay is turned on, Autoset will place all signals center vertically on-screen with the vertical settings on each channel configured so that the amplitude of the signal occupies n divisions = Percent/10 divisions.
Usage
  • Using the .write(value) method will send the AUTOSet:OVErlay value command.
SCPI Syntax 
- AUTOSet:OVErlay {ON|OFF}

AutosetPercent

Bases: SCPICmdWrite

The AUTOSet:PERcent command.

Description
  • Sets or queries the percent of the full vertical scale that the signal should cover after Autoset is run when Overlay is turned on.
Usage
  • Using the .write(value) method will send the AUTOSet:PERcent value command.
SCPI Syntax 
- AUTOSet:PERcent <NR3>