[python source code]

clock

The clock commands module.

These commands are used in the following models: AWG70KA, AWG70KB

THIS FILE IS AUTO-GENERATED, IT SHOULD NOT BE MANUALLY MODIFIED.

Please report an issue if one is found.

Commands and Queries 
- CLOCk:ECLock:DIVider <NR1>
- CLOCk:ECLock:DIVider?
- CLOCk:ECLock:FREQuency <NR3>
- CLOCk:ECLock:FREQuency:ADJust
- CLOCk:ECLock:FREQuency:DETect
- CLOCk:ECLock:FREQuency?
- CLOCk:ECLock:MULTiplier <NR1>
- CLOCk:ECLock:MULTiplier?
- CLOCk:EREFerence:DIVider <NR1>
- CLOCk:EREFerence:DIVider?
- CLOCk:EREFerence:FREQuency <NRf>
- CLOCk:EREFerence:FREQuency:DETect
- CLOCk:EREFerence:FREQuency?
- CLOCk:EREFerence:MULTiplier <NR1>
- CLOCk:EREFerence:MULTiplier?
- CLOCk:JITTer {ON|OFF|1|0}
- CLOCk:JITTer?
- CLOCk:OUTPut:FREQuency?
- CLOCk:OUTPut:STATe {ON|OFF|1|0}
- CLOCk:OUTPut:STATe?
- CLOCk:PHASe:ADJust:DEGRees <NR1>
- CLOCk:PHASe:ADJust:DEGRees?
- CLOCk:PHASe:ADJust:TIMe <NRf>
- CLOCk:PHASe:ADJust:TIMe?
- CLOCk:SOURce {INTernal|EFIXed|EVARiable|EXTernal}
- CLOCk:SOURce?
- CLOCk:SOUT:STATe {ON|OFF|1|0}
- CLOCk:SOUT:STATe?
- CLOCk:SRATe <NRf>
- CLOCk:SRATe?

Clock

Bases: SCPICmdRead

The CLOCk command tree.

Usage
  • Using the .query() method will send the CLOCk? query.
  • Using the .verify(value) method will send the CLOCk? query and raise an AssertionError if the returned value does not match value.
Properties
  • .eclock: The CLOCk:ECLock command tree.
  • .ereference: The CLOCk:EREFerence command tree.
  • .jitter: The CLOCk:JITTer command.
  • .output: The CLOCk:OUTPut command tree.
  • .phase: The CLOCk:PHASe command tree.
  • .source: The CLOCk:SOURce command.
  • .sout: The CLOCk:SOUT command tree.
  • .srate: The CLOCk:SRATe command.

eclock property 

eclock: ClockEclock

Return the CLOCk:ECLock command tree.

Usage
  • Using the .query() method will send the CLOCk:ECLock? query.
  • Using the .verify(value) method will send the CLOCk:ECLock? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .divider: The CLOCk:ECLock:DIVider command.
  • .frequency: The CLOCk:ECLock:FREQuency command.
  • .multiplier: The CLOCk:ECLock:MULTiplier command.

ereference property 

ereference: ClockEreference

Return the CLOCk:EREFerence command tree.

Usage
  • Using the .query() method will send the CLOCk:EREFerence? query.
  • Using the .verify(value) method will send the CLOCk:EREFerence? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .divider: The CLOCk:EREFerence:DIVider command.
  • .frequency: The CLOCk:EREFerence:FREQuency command.
  • .multiplier: The CLOCk:EREFerence:MULTiplier command.

jitter property 

jitter: ClockJitter

Return the CLOCk:JITTer command.

Description
  • This command sets or returns the state (enabled or disabled) to apply or not apply jitter reduction to the internal system clock or the clock signal applied to the Reference In connector.
Usage
  • Using the .query() method will send the CLOCk:JITTer? query.
  • Using the .verify(value) method will send the CLOCk:JITTer? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the CLOCk:JITTer value command.
SCPI Syntax 
- CLOCk:JITTer {ON|OFF|1|0}
- CLOCk:JITTer?
Info
  • *RST sets this to 0.

output property 

output: ClockOutput

Return the CLOCk:OUTPut command tree.

Usage
  • Using the .query() method will send the CLOCk:OUTPut? query.
  • Using the .verify(value) method will send the CLOCk:OUTPut? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .frequency: The CLOCk:OUTPut:FREQuency command.
  • .state: The CLOCk:OUTPut:STATe command.

phase property 

phase: ClockPhase

Return the CLOCk:PHASe command tree.

Usage
  • Using the .query() method will send the CLOCk:PHASe? query.
  • Using the .verify(value) method will send the CLOCk:PHASe? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .adjust: The CLOCk:PHASe:ADJust command tree.

source property 

source: ClockSource

Return the CLOCk:SOURce command.

Description
  • This command sets or returns the source of the clock.
Usage
  • Using the .query() method will send the CLOCk:SOURce? query.
  • Using the .verify(value) method will send the CLOCk:SOURce? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the CLOCk:SOURce value command.
SCPI Syntax 
- CLOCk:SOURce {INTernal|EFIXed|EVARiable|EXTernal}
- CLOCk:SOURce?
Info
  • *RST sets this to INT.

sout property 

sout: ClockSout

Return the CLOCk:SOUT command tree.

Usage
  • Using the .query() method will send the CLOCk:SOUT? query.
  • Using the .verify(value) method will send the CLOCk:SOUT? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .state: The CLOCk:SOUT:STATe command.

srate property 

srate: ClockSrate

Return the CLOCk:SRATe command.

Description
  • This command sets or returns the sample rate for the clock. When CLOCk:SOURce is set to EXTernal, the maximum sample rate is: 4 * External Clock In frequency (AWG70001)2 * External Clock In frequency (AWG70002)
Usage
  • Using the .query() method will send the CLOCk:SRATe? query.
  • Using the .verify(value) method will send the CLOCk:SRATe? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the CLOCk:SRATe value command.
SCPI Syntax 
- CLOCk:SRATe <NRf>
- CLOCk:SRATe?
Info
  • *RST sets this to the maximum value.

ClockEclock

Bases: SCPICmdRead

The CLOCk:ECLock command tree.

Usage
  • Using the .query() method will send the CLOCk:ECLock? query.
  • Using the .verify(value) method will send the CLOCk:ECLock? query and raise an AssertionError if the returned value does not match value.
Properties
  • .divider: The CLOCk:ECLock:DIVider command.
  • .frequency: The CLOCk:ECLock:FREQuency command.
  • .multiplier: The CLOCk:ECLock:MULTiplier command.

divider property 

divider: ClockEclockDivider

Return the CLOCk:ECLock:DIVider command.

Description
  • This command sets or returns the divider rate for the external clock.
Usage
  • Using the .query() method will send the CLOCk:ECLock:DIVider? query.
  • Using the .verify(value) method will send the CLOCk:ECLock:DIVider? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the CLOCk:ECLock:DIVider value command.
SCPI Syntax 
- CLOCk:ECLock:DIVider <NR1>
- CLOCk:ECLock:DIVider?
Info
  • *RST sets this to 1.

frequency property 

frequency: ClockEclockFrequency

Return the CLOCk:ECLock:FREQuency command.

Description
  • This command sets or returns the expected frequency being provided by the external clock.
Usage
  • Using the .query() method will send the CLOCk:ECLock:FREQuency? query.
  • Using the .verify(value) method will send the CLOCk:ECLock:FREQuency? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the CLOCk:ECLock:FREQuency value command.
SCPI Syntax 
- CLOCk:ECLock:FREQuency <NR3>
- CLOCk:ECLock:FREQuency?
Info
  • *RST sets this to 6.25 GHz.
Sub-properties
  • .adjust: The CLOCk:ECLock:FREQuency:ADJust command.
  • .detect: The CLOCk:ECLock:FREQuency:DETect command.

multiplier property 

multiplier: ClockEclockMultiplier

Return the CLOCk:ECLock:MULTiplier command.

Description
  • This command sets or returns the multiplier rate of the external clock.
Usage
  • Using the .query() method will send the CLOCk:ECLock:MULTiplier? query.
  • Using the .verify(value) method will send the CLOCk:ECLock:MULTiplier? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the CLOCk:ECLock:MULTiplier value command.
SCPI Syntax 
- CLOCk:ECLock:MULTiplier <NR1>
- CLOCk:ECLock:MULTiplier?
Info
  • *RST sets this to 1.

ClockEclockDivider

Bases: SCPICmdWrite, SCPICmdRead

The CLOCk:ECLock:DIVider command.

Description
  • This command sets or returns the divider rate for the external clock.
Usage
  • Using the .query() method will send the CLOCk:ECLock:DIVider? query.
  • Using the .verify(value) method will send the CLOCk:ECLock:DIVider? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the CLOCk:ECLock:DIVider value command.
SCPI Syntax 
- CLOCk:ECLock:DIVider <NR1>
- CLOCk:ECLock:DIVider?
Info
  • *RST sets this to 1.

ClockEclockFrequency

Bases: SCPICmdWrite, SCPICmdRead

The CLOCk:ECLock:FREQuency command.

Description
  • This command sets or returns the expected frequency being provided by the external clock.
Usage
  • Using the .query() method will send the CLOCk:ECLock:FREQuency? query.
  • Using the .verify(value) method will send the CLOCk:ECLock:FREQuency? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the CLOCk:ECLock:FREQuency value command.
SCPI Syntax 
- CLOCk:ECLock:FREQuency <NR3>
- CLOCk:ECLock:FREQuency?
Info
  • *RST sets this to 6.25 GHz.
Properties
  • .adjust: The CLOCk:ECLock:FREQuency:ADJust command.
  • .detect: The CLOCk:ECLock:FREQuency:DETect command.

adjust property 

adjust: ClockEclockFrequencyAdjust

Return the CLOCk:ECLock:FREQuency:ADJust command.

Description
  • This command initiates an adjustment (calibration) to the system clock circuitry. The adjustment can be run at any time, but if the system detects setting changes that impact clock accuracy, the adjustment is required before any signals can be played. A message is displayed in the status area when an adjustment is required. A error message is generated if the adjustment fails.
Usage
  • Using the .write() method will send the CLOCk:ECLock:FREQuency:ADJust command.
SCPI Syntax 
- CLOCk:ECLock:FREQuency:ADJust

detect property 

detect: ClockEclockFrequencyDetect

Return the CLOCk:ECLock:FREQuency:DETect command.

Description
  • This command detects the frequency of the signal applied to the Clock In connector and adjusts the system to use the signal. The frequency is detected once each time the command executes. An error message is generated if no frequency is detected or is out of range.
Usage
  • Using the .write() method will send the CLOCk:ECLock:FREQuency:DETect command.
SCPI Syntax 
- CLOCk:ECLock:FREQuency:DETect

ClockEclockFrequencyAdjust

Bases: SCPICmdWriteNoArguments

The CLOCk:ECLock:FREQuency:ADJust command.

Description
  • This command initiates an adjustment (calibration) to the system clock circuitry. The adjustment can be run at any time, but if the system detects setting changes that impact clock accuracy, the adjustment is required before any signals can be played. A message is displayed in the status area when an adjustment is required. A error message is generated if the adjustment fails.
Usage
  • Using the .write() method will send the CLOCk:ECLock:FREQuency:ADJust command.
SCPI Syntax 
- CLOCk:ECLock:FREQuency:ADJust

ClockEclockFrequencyDetect

Bases: SCPICmdWriteNoArguments

The CLOCk:ECLock:FREQuency:DETect command.

Description
  • This command detects the frequency of the signal applied to the Clock In connector and adjusts the system to use the signal. The frequency is detected once each time the command executes. An error message is generated if no frequency is detected or is out of range.
Usage
  • Using the .write() method will send the CLOCk:ECLock:FREQuency:DETect command.
SCPI Syntax 
- CLOCk:ECLock:FREQuency:DETect

ClockEclockMultiplier

Bases: SCPICmdWrite, SCPICmdRead

The CLOCk:ECLock:MULTiplier command.

Description
  • This command sets or returns the multiplier rate of the external clock.
Usage
  • Using the .query() method will send the CLOCk:ECLock:MULTiplier? query.
  • Using the .verify(value) method will send the CLOCk:ECLock:MULTiplier? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the CLOCk:ECLock:MULTiplier value command.
SCPI Syntax 
- CLOCk:ECLock:MULTiplier <NR1>
- CLOCk:ECLock:MULTiplier?
Info
  • *RST sets this to 1.

ClockEreference

Bases: SCPICmdRead

The CLOCk:EREFerence command tree.

Usage
  • Using the .query() method will send the CLOCk:EREFerence? query.
  • Using the .verify(value) method will send the CLOCk:EREFerence? query and raise an AssertionError if the returned value does not match value.
Properties
  • .divider: The CLOCk:EREFerence:DIVider command.
  • .frequency: The CLOCk:EREFerence:FREQuency command.
  • .multiplier: The CLOCk:EREFerence:MULTiplier command.

divider property 

divider: ClockEreferenceDivider

Return the CLOCk:EREFerence:DIVider command.

Description
  • This command sets or returns the divider rate of the external reference signal when the external reference is variable.
Usage
  • Using the .query() method will send the CLOCk:EREFerence:DIVider? query.
  • Using the .verify(value) method will send the CLOCk:EREFerence:DIVider? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the CLOCk:EREFerence:DIVider value command.
SCPI Syntax 
- CLOCk:EREFerence:DIVider <NR1>
- CLOCk:EREFerence:DIVider?
Info
  • *RST sets this to 1.

frequency property 

frequency: ClockEreferenceFrequency

Return the CLOCk:EREFerence:FREQuency command.

Description
  • This command sets or returns the expected frequency of the signal applied to the Reference In connector.
Usage
  • Using the .query() method will send the CLOCk:EREFerence:FREQuency? query.
  • Using the .verify(value) method will send the CLOCk:EREFerence:FREQuency? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the CLOCk:EREFerence:FREQuency value command.
SCPI Syntax 
- CLOCk:EREFerence:FREQuency <NRf>
- CLOCk:EREFerence:FREQuency?
Info
  • *RST sets this to 35 MHz.
Sub-properties
  • .detect: The CLOCk:EREFerence:FREQuency:DETect command.

multiplier property 

multiplier: ClockEreferenceMultiplier

Return the CLOCk:EREFerence:MULTiplier command.

Description
  • This command sets or returns the multiplier rate of the variable external reference signal.
Usage
  • Using the .query() method will send the CLOCk:EREFerence:MULTiplier? query.
  • Using the .verify(value) method will send the CLOCk:EREFerence:MULTiplier? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the CLOCk:EREFerence:MULTiplier value command.
SCPI Syntax 
- CLOCk:EREFerence:MULTiplier <NR1>
- CLOCk:EREFerence:MULTiplier?
Info
  • *RST sets this to 1.

ClockEreferenceDivider

Bases: SCPICmdWrite, SCPICmdRead

The CLOCk:EREFerence:DIVider command.

Description
  • This command sets or returns the divider rate of the external reference signal when the external reference is variable.
Usage
  • Using the .query() method will send the CLOCk:EREFerence:DIVider? query.
  • Using the .verify(value) method will send the CLOCk:EREFerence:DIVider? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the CLOCk:EREFerence:DIVider value command.
SCPI Syntax 
- CLOCk:EREFerence:DIVider <NR1>
- CLOCk:EREFerence:DIVider?
Info
  • *RST sets this to 1.

ClockEreferenceFrequency

Bases: SCPICmdWrite, SCPICmdRead

The CLOCk:EREFerence:FREQuency command.

Description
  • This command sets or returns the expected frequency of the signal applied to the Reference In connector.
Usage
  • Using the .query() method will send the CLOCk:EREFerence:FREQuency? query.
  • Using the .verify(value) method will send the CLOCk:EREFerence:FREQuency? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the CLOCk:EREFerence:FREQuency value command.
SCPI Syntax 
- CLOCk:EREFerence:FREQuency <NRf>
- CLOCk:EREFerence:FREQuency?
Info
  • *RST sets this to 35 MHz.
Properties
  • .detect: The CLOCk:EREFerence:FREQuency:DETect command.

detect property 

detect: ClockEreferenceFrequencyDetect

Return the CLOCk:EREFerence:FREQuency:DETect command.

Description
  • This command detects the frequency of the signal applied to the Reference In connector and adjusts the system to use the signal. The frequency is detected once each time the command executes. An error message is generated if no frequency is detected, is out of range, or if the adjustment fails. This command is only valid when the clock source is external. Errors are not returned. They are added to the system error queue which can be accessed with SYSTEM:ERROR:NEXT.
Usage
  • Using the .write() method will send the CLOCk:EREFerence:FREQuency:DETect command.
SCPI Syntax 
- CLOCk:EREFerence:FREQuency:DETect

ClockEreferenceFrequencyDetect

Bases: SCPICmdWriteNoArguments

The CLOCk:EREFerence:FREQuency:DETect command.

Description
  • This command detects the frequency of the signal applied to the Reference In connector and adjusts the system to use the signal. The frequency is detected once each time the command executes. An error message is generated if no frequency is detected, is out of range, or if the adjustment fails. This command is only valid when the clock source is external. Errors are not returned. They are added to the system error queue which can be accessed with SYSTEM:ERROR:NEXT.
Usage
  • Using the .write() method will send the CLOCk:EREFerence:FREQuency:DETect command.
SCPI Syntax 
- CLOCk:EREFerence:FREQuency:DETect

ClockEreferenceMultiplier

Bases: SCPICmdWrite, SCPICmdRead

The CLOCk:EREFerence:MULTiplier command.

Description
  • This command sets or returns the multiplier rate of the variable external reference signal.
Usage
  • Using the .query() method will send the CLOCk:EREFerence:MULTiplier? query.
  • Using the .verify(value) method will send the CLOCk:EREFerence:MULTiplier? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the CLOCk:EREFerence:MULTiplier value command.
SCPI Syntax 
- CLOCk:EREFerence:MULTiplier <NR1>
- CLOCk:EREFerence:MULTiplier?
Info
  • *RST sets this to 1.

ClockJitter

Bases: SCPICmdWrite, SCPICmdRead

The CLOCk:JITTer command.

Description
  • This command sets or returns the state (enabled or disabled) to apply or not apply jitter reduction to the internal system clock or the clock signal applied to the Reference In connector.
Usage
  • Using the .query() method will send the CLOCk:JITTer? query.
  • Using the .verify(value) method will send the CLOCk:JITTer? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the CLOCk:JITTer value command.
SCPI Syntax 
- CLOCk:JITTer {ON|OFF|1|0}
- CLOCk:JITTer?
Info
  • *RST sets this to 0.

ClockOutput

Bases: SCPICmdRead

The CLOCk:OUTPut command tree.

Usage
  • Using the .query() method will send the CLOCk:OUTPut? query.
  • Using the .verify(value) method will send the CLOCk:OUTPut? query and raise an AssertionError if the returned value does not match value.
Properties
  • .frequency: The CLOCk:OUTPut:FREQuency command.
  • .state: The CLOCk:OUTPut:STATe command.

frequency property 

frequency: ClockOutputFrequency

Return the CLOCk:OUTPut:FREQuency command.

Description
  • This command returns the frequency of the output clock on the Clock Out connector.
Usage
  • Using the .query() method will send the CLOCk:OUTPut:FREQuency? query.
  • Using the .verify(value) method will send the CLOCk:OUTPut:FREQuency? query and raise an AssertionError if the returned value does not match value.
SCPI Syntax 
- CLOCk:OUTPut:FREQuency?

state property 

state: ClockOutputState

Return the CLOCk:OUTPut:STATe command.

Description
  • This command sets or returns the state of the output clock (enabled or disabled). Enabling Clock Out provides a high speed clock (that is related to sample rate) to drive other devices or to measure.
Usage
  • Using the .query() method will send the CLOCk:OUTPut:STATe? query.
  • Using the .verify(value) method will send the CLOCk:OUTPut:STATe? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the CLOCk:OUTPut:STATe value command.
SCPI Syntax 
- CLOCk:OUTPut:STATe {ON|OFF|1|0}
- CLOCk:OUTPut:STATe?
Info
  • *RST sets this to 0.

ClockOutputFrequency

Bases: SCPICmdRead

The CLOCk:OUTPut:FREQuency command.

Description
  • This command returns the frequency of the output clock on the Clock Out connector.
Usage
  • Using the .query() method will send the CLOCk:OUTPut:FREQuency? query.
  • Using the .verify(value) method will send the CLOCk:OUTPut:FREQuency? query and raise an AssertionError if the returned value does not match value.
SCPI Syntax 
- CLOCk:OUTPut:FREQuency?

ClockOutputState

Bases: SCPICmdWrite, SCPICmdRead

The CLOCk:OUTPut:STATe command.

Description
  • This command sets or returns the state of the output clock (enabled or disabled). Enabling Clock Out provides a high speed clock (that is related to sample rate) to drive other devices or to measure.
Usage
  • Using the .query() method will send the CLOCk:OUTPut:STATe? query.
  • Using the .verify(value) method will send the CLOCk:OUTPut:STATe? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the CLOCk:OUTPut:STATe value command.
SCPI Syntax 
- CLOCk:OUTPut:STATe {ON|OFF|1|0}
- CLOCk:OUTPut:STATe?
Info
  • *RST sets this to 0.

ClockPhase

Bases: SCPICmdRead

The CLOCk:PHASe command tree.

Usage
  • Using the .query() method will send the CLOCk:PHASe? query.
  • Using the .verify(value) method will send the CLOCk:PHASe? query and raise an AssertionError if the returned value does not match value.
Properties
  • .adjust: The CLOCk:PHASe:ADJust command tree.

adjust property 

adjust: ClockPhaseAdjust

Return the CLOCk:PHASe:ADJust command tree.

Usage
  • Using the .query() method will send the CLOCk:PHASe:ADJust? query.
  • Using the .verify(value) method will send the CLOCk:PHASe:ADJust? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .degrees: The CLOCk:PHASe:ADJust:DEGRees command.
  • .time: The CLOCk:PHASe:ADJust:TIMe command.

ClockPhaseAdjust

Bases: SCPICmdRead

The CLOCk:PHASe:ADJust command tree.

Usage
  • Using the .query() method will send the CLOCk:PHASe:ADJust? query.
  • Using the .verify(value) method will send the CLOCk:PHASe:ADJust? query and raise an AssertionError if the returned value does not match value.
Properties
  • .degrees: The CLOCk:PHASe:ADJust:DEGRees command.
  • .time: The CLOCk:PHASe:ADJust:TIMe command.

degrees property 

degrees: ClockPhaseAdjustDegrees

Return the CLOCk:PHASe:ADJust:DEGRees command.

Description
  • This command sets or returns the phase adjustment, in units of degrees, to synchronize multiple AWGs when using an external trigger. Setting the phase adjusts the phase of all signal outputs relative to the system clock.
Usage
  • Using the .query() method will send the CLOCk:PHASe:ADJust:DEGRees? query.
  • Using the .verify(value) method will send the CLOCk:PHASe:ADJust:DEGRees? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the CLOCk:PHASe:ADJust:DEGRees value command.
SCPI Syntax 
- CLOCk:PHASe:ADJust:DEGRees <NR1>
- CLOCk:PHASe:ADJust:DEGRees?
Info
  • *RST sets this to 0.

time property 

time: ClockPhaseAdjustTime

Return the CLOCk:PHASe:ADJust:TIMe command.

Description
  • This command sets or returns the phase adjustment, in units of time, to synchronize multiple AWGs when using an external trigger. Setting the phase adjusts the phase of all signal outputs relative to the system clock.
Usage
  • Using the .query() method will send the CLOCk:PHASe:ADJust:TIMe? query.
  • Using the .verify(value) method will send the CLOCk:PHASe:ADJust:TIMe? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the CLOCk:PHASe:ADJust:TIMe value command.
SCPI Syntax 
- CLOCk:PHASe:ADJust:TIMe <NRf>
- CLOCk:PHASe:ADJust:TIMe?
Info
  • *RST sets this to 0 ps.

ClockPhaseAdjustDegrees

Bases: SCPICmdWrite, SCPICmdRead

The CLOCk:PHASe:ADJust:DEGRees command.

Description
  • This command sets or returns the phase adjustment, in units of degrees, to synchronize multiple AWGs when using an external trigger. Setting the phase adjusts the phase of all signal outputs relative to the system clock.
Usage
  • Using the .query() method will send the CLOCk:PHASe:ADJust:DEGRees? query.
  • Using the .verify(value) method will send the CLOCk:PHASe:ADJust:DEGRees? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the CLOCk:PHASe:ADJust:DEGRees value command.
SCPI Syntax 
- CLOCk:PHASe:ADJust:DEGRees <NR1>
- CLOCk:PHASe:ADJust:DEGRees?
Info
  • *RST sets this to 0.

ClockPhaseAdjustTime

Bases: SCPICmdWrite, SCPICmdRead

The CLOCk:PHASe:ADJust:TIMe command.

Description
  • This command sets or returns the phase adjustment, in units of time, to synchronize multiple AWGs when using an external trigger. Setting the phase adjusts the phase of all signal outputs relative to the system clock.
Usage
  • Using the .query() method will send the CLOCk:PHASe:ADJust:TIMe? query.
  • Using the .verify(value) method will send the CLOCk:PHASe:ADJust:TIMe? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the CLOCk:PHASe:ADJust:TIMe value command.
SCPI Syntax 
- CLOCk:PHASe:ADJust:TIMe <NRf>
- CLOCk:PHASe:ADJust:TIMe?
Info
  • *RST sets this to 0 ps.

ClockSource

Bases: SCPICmdWrite, SCPICmdRead

The CLOCk:SOURce command.

Description
  • This command sets or returns the source of the clock.
Usage
  • Using the .query() method will send the CLOCk:SOURce? query.
  • Using the .verify(value) method will send the CLOCk:SOURce? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the CLOCk:SOURce value command.
SCPI Syntax 
- CLOCk:SOURce {INTernal|EFIXed|EVARiable|EXTernal}
- CLOCk:SOURce?
Info
  • *RST sets this to INT.

ClockSout

Bases: SCPICmdRead

The CLOCk:SOUT command tree.

Usage
  • Using the .query() method will send the CLOCk:SOUT? query.
  • Using the .verify(value) method will send the CLOCk:SOUT? query and raise an AssertionError if the returned value does not match value.
Properties
  • .state: The CLOCk:SOUT:STATe command.

state property 

state: ClockSoutState

Return the CLOCk:SOUT:STATe command.

Description
  • This command sets or returns the state of the Sync Clock Out output.
Usage
  • Using the .query() method will send the CLOCk:SOUT:STATe? query.
  • Using the .verify(value) method will send the CLOCk:SOUT:STATe? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the CLOCk:SOUT:STATe value command.
SCPI Syntax 
- CLOCk:SOUT:STATe {ON|OFF|1|0}
- CLOCk:SOUT:STATe?
Info
  • *RST sets this to 0.

ClockSoutState

Bases: SCPICmdWrite, SCPICmdRead

The CLOCk:SOUT:STATe command.

Description
  • This command sets or returns the state of the Sync Clock Out output.
Usage
  • Using the .query() method will send the CLOCk:SOUT:STATe? query.
  • Using the .verify(value) method will send the CLOCk:SOUT:STATe? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the CLOCk:SOUT:STATe value command.
SCPI Syntax 
- CLOCk:SOUT:STATe {ON|OFF|1|0}
- CLOCk:SOUT:STATe?
Info
  • *RST sets this to 0.

ClockSrate

Bases: SCPICmdWrite, SCPICmdRead

The CLOCk:SRATe command.

Description
  • This command sets or returns the sample rate for the clock. When CLOCk:SOURce is set to EXTernal, the maximum sample rate is: 4 * External Clock In frequency (AWG70001)2 * External Clock In frequency (AWG70002)
Usage
  • Using the .query() method will send the CLOCk:SRATe? query.
  • Using the .verify(value) method will send the CLOCk:SRATe? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the CLOCk:SRATe value command.
SCPI Syntax 
- CLOCk:SRATe <NRf>
- CLOCk:SRATe?
Info
  • *RST sets this to the maximum value.