wavfrm ¶

The wavfrm commands module.

These commands are used in the following models: DPO2K, DPO2KB, DPO4K, DPO4KB, DPO5K, DPO5KB, DPO70KC, DPO70KD, DPO70KDX, DPO70KSX, DPO7AX, DPO7K, DPO7KC, DSA70KC, DSA70KD, LPD6, MDO3, MDO3K, MDO4K, MDO4KB, MDO4KC, MSO2, MSO2K, MSO2KB, MSO4, MSO4B, MSO4K, MSO4KB, MSO5, MSO5B, MSO5K, MSO5KB, MSO5LP, MSO6, MSO6B, MSO70KC, MSO70KDX, TekScopePC

THIS FILE IS AUTO-GENERATED, IT SHOULD NOT BE MANUALLY MODIFIED.

Please report an issue if one is found.

Commands and Queries

- WAVFrm?

Wavfrm ¶

Bases: SCPICmdRead

The WAVFrm command.

Description

This query-only command provides the Tektronix standard waveform query which returns the waveform preamble followed by the waveform data for the source specified by :DATa:SOUrce using the :DATa settings for encoding, width, and so forth.

Usage

Using the .query() method will send the WAVFrm? query.
Using the .verify(value) method will send the WAVFrm? query and raise an AssertionError if the returned value does not match value.

SCPI Syntax

- WAVFrm?