cursor ¶

The cursor commands module.

These commands are used in the following models: DPO2K, DPO2KB, MSO2K, MSO2KB

THIS FILE IS AUTO-GENERATED, IT SHOULD NOT BE MANUALLY MODIFIED.

Please report an issue if one is found.

Commands and Queries

- CURSor:FUNCtion {OFF|SCREEN|WAVEform|VBArs|HBArs}
- CURSor:FUNCtion?
- CURSor:HBArs:DELTa?
- CURSor:HBArs:POSITION<x> <NR3>
- CURSor:HBArs:POSITION<x>?
- CURSor:HBArs:UNIts {BASe|PERcent}
- CURSor:HBArs:UNIts?
- CURSor:HBArs:USE {CURrent|HALFgrat|FIVEdivs}
- CURSor:HBArs?
- CURSor:MODe {TRACk|INDependent}
- CURSor:MODe?
- CURSor:VBArs:ALTERNATE<x>?
- CURSor:VBArs:DELTa?
- CURSor:VBArs:HPOS<x>?
- CURSor:VBArs:POSITION<x> <NR3>
- CURSor:VBArs:POSITION<x>?
- CURSor:VBArs:UNIts {SEConds|HERtz|DEGrees|PERcent}
- CURSor:VBArs:UNIts?
- CURSor:VBArs:USE {CURrent|HALFgrat|FIVEdivs}
- CURSor:VBArs:VDELTa?
- CURSor:VBArs?
- CURSor:XY:POLar:RADIUS:DELta?
- CURSor:XY:POLar:RADIUS:POSITION<x>?
- CURSor:XY:POLar:RADIUS:UNIts?
- CURSor:XY:POLar:THETA:DELta?
- CURSor:XY:POLar:THETA:POSITION<x>?
- CURSor:XY:POLar:THETA:UNIts?
- CURSor:XY:PRODDELta?
- CURSor:XY:PRODUCT:DELta?
- CURSor:XY:PRODUCT:POSITION<x>?
- CURSor:XY:PRODUCT:UNIts?
- CURSor:XY:RATIO:DELta?
- CURSor:XY:RATIO:POSITION<x>?
- CURSor:XY:RATIO:UNIts?
- CURSor:XY:RECTangular:X:DELta?
- CURSor:XY:RECTangular:X:POSITION<x> <NR3>
- CURSor:XY:RECTangular:X:POSITION<x>?
- CURSor:XY:RECTangular:X:UNIts?
- CURSor:XY:RECTangular:Y:DELta?
- CURSor:XY:RECTangular:Y:POSITION<x> <NR3>
- CURSor:XY:RECTangular:Y:POSITION<x>?
- CURSor:XY:RECTangular:Y:UNIts?
- CURSor?

Cursor ¶

Bases: SCPICmdRead

The CURSor command.

Description

Returns all of the current cursor settings.

Usage

Using the .query() method will send the CURSor? query.
Using the .verify(value) method will send the CURSor? query and raise an AssertionError if the returned value does not match value.

SCPI Syntax

- CURSor?

Properties

.function: The CURSor:FUNCtion command.
.hbars: The CURSor:HBArs command.
.mode: The CURSor:MODe command.
.vbars: The CURSor:VBArs command.
.xy: The CURSor:XY command tree.

function `property` ¶

function: CursorFunction

Return the CURSor:FUNCtion command.

Description

Sets or returns the cursor type. Cursors are attached to the selected waveform in Waveform mode and are attached to the display area in Screen mode.

Usage

Using the .query() method will send the CURSor:FUNCtion? query.
Using the .verify(value) method will send the CURSor:FUNCtion? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the CURSor:FUNCtion value command.

SCPI Syntax

- CURSor:FUNCtion {OFF|SCREEN|WAVEform|VBArs|HBArs}
- CURSor:FUNCtion?

Info

OFF removes the cursors from the display but does not change the cursor type.
SCREEN specifies both horizontal and vertical bar cursors, which measure the selected waveform in horizontal and vertical units. Use these cursors to measure anywhere in the waveform display area.
WAVEform specifies paired cursors in YT display format for measuring waveform amplitude and time. In XY and XYZ format, these cursors indicate the amplitude positions of an XY pair (Ch1 vs Ch2 voltage, where Ch1 is the X axis and Ch2 is the Y axis) relative to the trigger.
VBArs specifies the vertical bar cursor to measure the selected waveform in vertical units.
HBArs specifies the horizontal bar cursor to measure the selected waveform in horizontal units.

hbars `property` ¶

hbars: CursorHbars

Return the CURSor:HBArs command.

Description

Returns the current settings for the horizontal bar cursors.

Usage

Using the .query() method will send the CURSor:HBArs? query.
Using the .verify(value) method will send the CURSor:HBArs? query and raise an AssertionError if the returned value does not match value.

SCPI Syntax

- CURSor:HBArs?

Sub-properties

.delta: The CURSor:HBArs:DELTa command.
.position: The CURSor:HBArs:POSITION<x> command.
.units: The CURSor:HBArs:UNIts command.
.use: The CURSor:HBArs:USE command.

mode `property` ¶

mode: CursorMode

Return the CURSor:MODe command.

Description

This command specifies whether the two cursors move linked together in unison or separately. This command is equivalent to setting Linked to On or Off in the Cursor menu.

Usage

Using the .query() method will send the CURSor:MODe? query.
Using the .verify(value) method will send the CURSor:MODe? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the CURSor:MODe value command.

SCPI Syntax

- CURSor:MODe {TRACk|INDependent}
- CURSor:MODe?

Info

TRACk ties the navigational functionality of the two cursors together. For cursor 1 adjustments, this ties the movement of the two cursors together; however, cursor 2 continues to move independently of cursor 1. This mode only applies when the DISPLAY:XY:WITHYT is set to OFF.
INDependent allows independent adjustment of the two cursors.

vbars `property` ¶

vbars: CursorVbars

Return the CURSor:VBArs command.

Description

Returns the current settings for the vertical bar cursors.

Usage

Using the .query() method will send the CURSor:VBArs? query.
Using the .verify(value) method will send the CURSor:VBArs? query and raise an AssertionError if the returned value does not match value.

SCPI Syntax

- CURSor:VBArs?

Sub-properties

.alternate: The CURSor:VBArs:ALTERNATE<x> command.
.delta: The CURSor:VBArs:DELTa command.
.hpos: The CURSor:VBArs:HPOS<x> command.
.position: The CURSor:VBArs:POSITION<x> command.
.units: The CURSor:VBArs:UNIts command.
.use: The CURSor:VBArs:USE command.
.vdelta: The CURSor:VBArs:VDELTa command.

xy `property` ¶

xy: CursorXy

Return the CURSor:XY command tree.

Usage

Using the .query() method will send the CURSor:XY? query.
Using the .verify(value) method will send the CURSor:XY? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.polar: The CURSor:XY:POLar command tree.
.proddelta: The CURSor:XY:PRODDELta command.
.product: The CURSor:XY:PRODUCT command tree.
.ratio: The CURSor:XY:RATIO command tree.
.rectangular: The CURSor:XY:RECTangular command tree.

CursorFunction ¶

Bases: SCPICmdWrite, SCPICmdRead

The CURSor:FUNCtion command.

Description

Sets or returns the cursor type. Cursors are attached to the selected waveform in Waveform mode and are attached to the display area in Screen mode.

Usage

Using the .query() method will send the CURSor:FUNCtion? query.
Using the .verify(value) method will send the CURSor:FUNCtion? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the CURSor:FUNCtion value command.

SCPI Syntax

- CURSor:FUNCtion {OFF|SCREEN|WAVEform|VBArs|HBArs}
- CURSor:FUNCtion?

Info

OFF removes the cursors from the display but does not change the cursor type.
SCREEN specifies both horizontal and vertical bar cursors, which measure the selected waveform in horizontal and vertical units. Use these cursors to measure anywhere in the waveform display area.
WAVEform specifies paired cursors in YT display format for measuring waveform amplitude and time. In XY and XYZ format, these cursors indicate the amplitude positions of an XY pair (Ch1 vs Ch2 voltage, where Ch1 is the X axis and Ch2 is the Y axis) relative to the trigger.
VBArs specifies the vertical bar cursor to measure the selected waveform in vertical units.
HBArs specifies the horizontal bar cursor to measure the selected waveform in horizontal units.

CursorHbars ¶

Bases: SCPICmdRead

The CURSor:HBArs command.

Description

Returns the current settings for the horizontal bar cursors.

Usage

Using the .query() method will send the CURSor:HBArs? query.
Using the .verify(value) method will send the CURSor:HBArs? query and raise an AssertionError if the returned value does not match value.

SCPI Syntax

- CURSor:HBArs?

Properties

.delta: The CURSor:HBArs:DELTa command.
.position: The CURSor:HBArs:POSITION<x> command.
.units: The CURSor:HBArs:UNIts command.
.use: The CURSor:HBArs:USE command.

delta `property` ¶

delta: CursorHbarsDelta

Return the CURSor:HBArs:DELTa command.

Description

Returns the vertical difference between the two horizontal bar cursors.

Usage

Using the .query() method will send the CURSor:HBArs:DELTa? query.
Using the .verify(value) method will send the CURSor:HBArs:DELTa? query and raise an AssertionError if the returned value does not match value.

SCPI Syntax

- CURSor:HBArs:DELTa?

position `property` ¶

position: dict[int, CursorHbarsPositionItem]

Return the CURSor:HBArs:POSITION<x> command.

Description

This command specifies the horizontal bar cursor position relative to ground, which is expressed in vertical units (usually volts). The cursor is specified by x, which can be 1 or 2.

Usage

Using the .query() method will send the CURSor:HBArs:POSITION<x>? query.
Using the .verify(value) method will send the CURSor:HBArs:POSITION<x>? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the CURSor:HBArs:POSITION<x> value command.

SCPI Syntax

- CURSor:HBArs:POSITION<x> <NR3>
- CURSor:HBArs:POSITION<x>?

Info

<NR3> is a floating point number that specifies the cursor position relative to ground.

units `property` ¶

units: CursorHbarsUnits

Return the CURSor:HBArs:UNIts command.

Description

Sets or returns the units for the horizontal bar cursors.

Usage

Using the .query() method will send the CURSor:HBArs:UNIts? query.
Using the .verify(value) method will send the CURSor:HBArs:UNIts? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the CURSor:HBArs:UNIts value command.

SCPI Syntax

- CURSor:HBArs:UNIts {BASe|PERcent}
- CURSor:HBArs:UNIts?

Info

BASe selects the vertical units for the selected waveform.
PERcent selects ratio cursors.

use `property` ¶

use: CursorHbarsUse

Return the CURSor:HBArs:USE command.

Description

Sets the horizontal bar cursor measurement scale. This command is only applicable when ratio cursors are on.

Usage

Using the .write(value) method will send the CURSor:HBArs:USE value command.

SCPI Syntax

- CURSor:HBArs:USE {CURrent|HALFgrat|FIVEdivs}

Info

CURrent sets the H Bar measurement scale so that 0% is the current position of the lowest H Bar cursor and 100% is the current position of the highest H Bar cursor.
HALFgrat resets the H bar measurement scale to half the number of divisions (five for some models and four for others) so that 25% is the current position of the lowest H Bar cursor and 75% is the current position of the highest H Bar.
FIVEdivs sets H Bar measurement scale so that five screen major divisions is 100%, where 0% is -2.5 divisions and 100% is +2.5 divisions from the center horizontal graticule.

CursorHbarsDelta ¶

Bases: SCPICmdRead

The CURSor:HBArs:DELTa command.

Description

Returns the vertical difference between the two horizontal bar cursors.

Usage

Using the .query() method will send the CURSor:HBArs:DELTa? query.
Using the .verify(value) method will send the CURSor:HBArs:DELTa? query and raise an AssertionError if the returned value does not match value.

SCPI Syntax

- CURSor:HBArs:DELTa?

CursorHbarsPositionItem ¶

Bases: ValidatedDynamicNumberCmd, SCPICmdWrite, SCPICmdRead

The CURSor:HBArs:POSITION<x> command.

Description

This command specifies the horizontal bar cursor position relative to ground, which is expressed in vertical units (usually volts). The cursor is specified by x, which can be 1 or 2.

Usage

Using the .query() method will send the CURSor:HBArs:POSITION<x>? query.
Using the .verify(value) method will send the CURSor:HBArs:POSITION<x>? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the CURSor:HBArs:POSITION<x> value command.

SCPI Syntax

- CURSor:HBArs:POSITION<x> <NR3>
- CURSor:HBArs:POSITION<x>?

Info

<NR3> is a floating point number that specifies the cursor position relative to ground.

CursorHbarsUnits ¶

Bases: SCPICmdWrite, SCPICmdRead

The CURSor:HBArs:UNIts command.

Description

Sets or returns the units for the horizontal bar cursors.

Usage

Using the .query() method will send the CURSor:HBArs:UNIts? query.
Using the .verify(value) method will send the CURSor:HBArs:UNIts? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the CURSor:HBArs:UNIts value command.

SCPI Syntax

- CURSor:HBArs:UNIts {BASe|PERcent}
- CURSor:HBArs:UNIts?

Info

BASe selects the vertical units for the selected waveform.
PERcent selects ratio cursors.

CursorHbarsUse ¶

Bases: SCPICmdWrite

The CURSor:HBArs:USE command.

Description

Sets the horizontal bar cursor measurement scale. This command is only applicable when ratio cursors are on.

Usage

Using the .write(value) method will send the CURSor:HBArs:USE value command.

SCPI Syntax

- CURSor:HBArs:USE {CURrent|HALFgrat|FIVEdivs}

Info

CURrent sets the H Bar measurement scale so that 0% is the current position of the lowest H Bar cursor and 100% is the current position of the highest H Bar cursor.
HALFgrat resets the H bar measurement scale to half the number of divisions (five for some models and four for others) so that 25% is the current position of the lowest H Bar cursor and 75% is the current position of the highest H Bar.
FIVEdivs sets H Bar measurement scale so that five screen major divisions is 100%, where 0% is -2.5 divisions and 100% is +2.5 divisions from the center horizontal graticule.

CursorMode ¶

Bases: SCPICmdWrite, SCPICmdRead

The CURSor:MODe command.

Description

This command specifies whether the two cursors move linked together in unison or separately. This command is equivalent to setting Linked to On or Off in the Cursor menu.

Usage

Using the .query() method will send the CURSor:MODe? query.
Using the .verify(value) method will send the CURSor:MODe? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the CURSor:MODe value command.

SCPI Syntax

- CURSor:MODe {TRACk|INDependent}
- CURSor:MODe?

Info

TRACk ties the navigational functionality of the two cursors together. For cursor 1 adjustments, this ties the movement of the two cursors together; however, cursor 2 continues to move independently of cursor 1. This mode only applies when the DISPLAY:XY:WITHYT is set to OFF.
INDependent allows independent adjustment of the two cursors.

CursorVbars ¶

Bases: SCPICmdRead

The CURSor:VBArs command.

Description

Returns the current settings for the vertical bar cursors.

Usage

Using the .query() method will send the CURSor:VBArs? query.
Using the .verify(value) method will send the CURSor:VBArs? query and raise an AssertionError if the returned value does not match value.

SCPI Syntax

- CURSor:VBArs?

Properties

.alternate: The CURSor:VBArs:ALTERNATE<x> command.
.delta: The CURSor:VBArs:DELTa command.
.hpos: The CURSor:VBArs:HPOS<x> command.
.position: The CURSor:VBArs:POSITION<x> command.
.units: The CURSor:VBArs:UNIts command.
.use: The CURSor:VBArs:USE command.
.vdelta: The CURSor:VBArs:VDELTa command.

alternate `property` ¶

alternate: dict[int, CursorVbarsAlternateItem]

Return the CURSor:VBArs:ALTERNATE<x> command.

Description

Returns the alternate readout for the waveform (Vbar) cursors specified by . This alternate readout is in effect when the selected waveform is a bus or digital channel.

Usage

Using the .query() method will send the CURSor:VBArs:ALTERNATE<x>? query.
Using the .verify(value) method will send the CURSor:VBArs:ALTERNATE<x>? query and raise an AssertionError if the returned value does not match value.

SCPI Syntax

- CURSor:VBArs:ALTERNATE<x>?

Info

X = 1 specifies vertical bar cursor1.
X = 2 specifies vertical bar cursor2.

delta `property` ¶

delta: CursorVbarsDelta

Return the CURSor:VBArs:DELTa command.

Description

Returns the horizontal difference between the two vertical bar cursors. The units are specified by the CURSor:VBArs:UNIts command.

Usage

Using the .query() method will send the CURSor:VBArs:DELTa? query.
Using the .verify(value) method will send the CURSor:VBArs:DELTa? query and raise an AssertionError if the returned value does not match value.

SCPI Syntax

- CURSor:VBArs:DELTa?

hpos `property` ¶

hpos: dict[int, CursorVbarsHposItem]

Return the CURSor:VBArs:HPOS<x> command.

Description

Returns the vertical value of the specified vertical bar ticks for cursor .

Usage

Using the .query() method will send the CURSor:VBArs:HPOS<x>? query.
Using the .verify(value) method will send the CURSor:VBArs:HPOS<x>? query and raise an AssertionError if the returned value does not match value.

SCPI Syntax

- CURSor:VBArs:HPOS<x>?

Info

<x> specifies the cursor. Valid values are 1 and 2.

position `property` ¶

position: dict[int, CursorVbarsPositionItem]

Return the CURSor:VBArs:POSITION<x> command.

Description

This command specifies the horizontal position for the specified vertical bar cursor. The cursor is specified by , which can be 1 or 2. Values are with respect to trigger position or the zero reference point for the designated waveform (if horizontal units are not set to time). Use the CURSOR:VBARS:UNITS command to specify units.

Usage

Using the .query() method will send the CURSor:VBArs:POSITION<x>? query.
Using the .verify(value) method will send the CURSor:VBArs:POSITION<x>? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the CURSor:VBArs:POSITION<x> value command.

SCPI Syntax

- CURSor:VBArs:POSITION<x> <NR3>
- CURSor:VBArs:POSITION<x>?

Info

<NR3> is a floating point number that specifies the cursor position.

units `property` ¶

units: CursorVbarsUnits

Return the CURSor:VBArs:UNIts command.

Description

This command specifies the units for the vertical bar cursors.

Usage

Using the .query() method will send the CURSor:VBArs:UNIts? query.
Using the .verify(value) method will send the CURSor:VBArs:UNIts? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the CURSor:VBArs:UNIts value command.

SCPI Syntax

- CURSor:VBArs:UNIts {SEConds|HERtz|DEGrees|PERcent}
- CURSor:VBArs:UNIts?

Info

SEConds sets the units of the vertical bar cursors for the time domain (seconds).
HERtz sets the units of the vertical bar cursors for the frequency domain (hertz).
DEGrees sets the units to degrees for measuring phase.
PERcent sets the units to percent for use with ratio cursors.

use `property` ¶

use: CursorVbarsUse

Return the CURSor:VBArs:USE command.

Description

Sets the vertical bar cursor measurement scale.

Usage

Using the .write(value) method will send the CURSor:VBArs:USE value command.

SCPI Syntax

- CURSor:VBArs:USE {CURrent|HALFgrat|FIVEdivs}

Info

CURrent sets the V Bar measurement scale so that 0% is the current position of the left-most V Bar cursor and 100% is the current position of the right-most V Bar cursor.
HALFgrat resets the ratio range to the default positions on the screen, half of the number of horizontal divisions, from 25% to 75% of the screen.
FIVEdivs sets V Bar measurement scale so that 5 screen major divisions is 100%, where 0% is -2.5 divisions and 100% is +2.5 divisions from the center vertical graticule.

vdelta `property` ¶

vdelta: CursorVbarsVdelta

Return the CURSor:VBArs:VDELTa command.

Description

Returns the vertical difference between the two vertical bar cursor ticks.

Usage

Using the .query() method will send the CURSor:VBArs:VDELTa? query.
Using the .verify(value) method will send the CURSor:VBArs:VDELTa? query and raise an AssertionError if the returned value does not match value.

SCPI Syntax

- CURSor:VBArs:VDELTa?

CursorVbarsAlternateItem ¶

Bases: ValidatedDynamicNumberCmd, SCPICmdRead

The CURSor:VBArs:ALTERNATE<x> command.

Description

Returns the alternate readout for the waveform (Vbar) cursors specified by . This alternate readout is in effect when the selected waveform is a bus or digital channel.

Usage

Using the .query() method will send the CURSor:VBArs:ALTERNATE<x>? query.
Using the .verify(value) method will send the CURSor:VBArs:ALTERNATE<x>? query and raise an AssertionError if the returned value does not match value.

SCPI Syntax

- CURSor:VBArs:ALTERNATE<x>?

Info

X = 1 specifies vertical bar cursor1.
X = 2 specifies vertical bar cursor2.

CursorVbarsDelta ¶

Bases: SCPICmdRead

The CURSor:VBArs:DELTa command.

Description

Returns the horizontal difference between the two vertical bar cursors. The units are specified by the CURSor:VBArs:UNIts command.

Usage

Using the .query() method will send the CURSor:VBArs:DELTa? query.
Using the .verify(value) method will send the CURSor:VBArs:DELTa? query and raise an AssertionError if the returned value does not match value.

SCPI Syntax

- CURSor:VBArs:DELTa?

CursorVbarsHposItem ¶

Bases: ValidatedDynamicNumberCmd, SCPICmdRead

The CURSor:VBArs:HPOS<x> command.

Description

Returns the vertical value of the specified vertical bar ticks for cursor .

Usage

Using the .query() method will send the CURSor:VBArs:HPOS<x>? query.
Using the .verify(value) method will send the CURSor:VBArs:HPOS<x>? query and raise an AssertionError if the returned value does not match value.

SCPI Syntax

- CURSor:VBArs:HPOS<x>?

Info

<x> specifies the cursor. Valid values are 1 and 2.

CursorVbarsPositionItem ¶

Bases: ValidatedDynamicNumberCmd, SCPICmdWrite, SCPICmdRead

The CURSor:VBArs:POSITION<x> command.

Description

This command specifies the horizontal position for the specified vertical bar cursor. The cursor is specified by , which can be 1 or 2. Values are with respect to trigger position or the zero reference point for the designated waveform (if horizontal units are not set to time). Use the CURSOR:VBARS:UNITS command to specify units.

Usage

Using the .query() method will send the CURSor:VBArs:POSITION<x>? query.
Using the .verify(value) method will send the CURSor:VBArs:POSITION<x>? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the CURSor:VBArs:POSITION<x> value command.

SCPI Syntax

- CURSor:VBArs:POSITION<x> <NR3>
- CURSor:VBArs:POSITION<x>?

Info

<NR3> is a floating point number that specifies the cursor position.

CursorVbarsUnits ¶

Bases: SCPICmdWrite, SCPICmdRead

The CURSor:VBArs:UNIts command.

Description

This command specifies the units for the vertical bar cursors.

Usage

Using the .query() method will send the CURSor:VBArs:UNIts? query.
Using the .verify(value) method will send the CURSor:VBArs:UNIts? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the CURSor:VBArs:UNIts value command.

SCPI Syntax

- CURSor:VBArs:UNIts {SEConds|HERtz|DEGrees|PERcent}
- CURSor:VBArs:UNIts?

Info

SEConds sets the units of the vertical bar cursors for the time domain (seconds).
HERtz sets the units of the vertical bar cursors for the frequency domain (hertz).
DEGrees sets the units to degrees for measuring phase.
PERcent sets the units to percent for use with ratio cursors.

CursorVbarsUse ¶

Bases: SCPICmdWrite

The CURSor:VBArs:USE command.

Description

Sets the vertical bar cursor measurement scale.

Usage

Using the .write(value) method will send the CURSor:VBArs:USE value command.

SCPI Syntax

- CURSor:VBArs:USE {CURrent|HALFgrat|FIVEdivs}

Info

CURrent sets the V Bar measurement scale so that 0% is the current position of the left-most V Bar cursor and 100% is the current position of the right-most V Bar cursor.
HALFgrat resets the ratio range to the default positions on the screen, half of the number of horizontal divisions, from 25% to 75% of the screen.
FIVEdivs sets V Bar measurement scale so that 5 screen major divisions is 100%, where 0% is -2.5 divisions and 100% is +2.5 divisions from the center vertical graticule.

CursorVbarsVdelta ¶

Bases: SCPICmdRead

The CURSor:VBArs:VDELTa command.

Description

Returns the vertical difference between the two vertical bar cursor ticks.

Usage

Using the .query() method will send the CURSor:VBArs:VDELTa? query.
Using the .verify(value) method will send the CURSor:VBArs:VDELTa? query and raise an AssertionError if the returned value does not match value.

SCPI Syntax

- CURSor:VBArs:VDELTa?

CursorXy ¶

Bases: SCPICmdRead

The CURSor:XY command tree.

Usage

Using the .query() method will send the CURSor:XY? query.
Using the .verify(value) method will send the CURSor:XY? query and raise an AssertionError if the returned value does not match value.

Properties

.polar: The CURSor:XY:POLar command tree.
.proddelta: The CURSor:XY:PRODDELta command.
.product: The CURSor:XY:PRODUCT command tree.
.ratio: The CURSor:XY:RATIO command tree.
.rectangular: The CURSor:XY:RECTangular command tree.

polar `property` ¶

polar: CursorXyPolar

Return the CURSor:XY:POLar command tree.

Usage

Using the .query() method will send the CURSor:XY:POLar? query.
Using the .verify(value) method will send the CURSor:XY:POLar? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.radius: The CURSor:XY:POLar:RADIUS command tree.
.theta: The CURSor:XY:POLar:THETA command tree.

proddelta `property` ¶

proddelta: CursorXyProddelta

Return the CURSor:XY:PRODDELta command.

Description

This query-only command returns the product of the difference between the cursors X positions and Y positions when the CURSor:XY:READOUT is set to PRODuct. The ΔX × ΔY value is calculated as (Cursor 2 X - Cursor 1 X) × (Cursor 2 Y - Cursor 1 Y).

Usage

Using the .query() method will send the CURSor:XY:PRODDELta? query.
Using the .verify(value) method will send the CURSor:XY:PRODDELta? query and raise an AssertionError if the returned value does not match value.

SCPI Syntax

- CURSor:XY:PRODDELta?

product `property` ¶

product: CursorXyProduct

Return the CURSor:XY:PRODUCT command tree.

Usage

Using the .query() method will send the CURSor:XY:PRODUCT? query.
Using the .verify(value) method will send the CURSor:XY:PRODUCT? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.delta: The CURSor:XY:PRODUCT:DELta command.
.position: The CURSor:XY:PRODUCT:POSITION<x> command.
.units: The CURSor:XY:PRODUCT:UNIts command.

ratio `property` ¶

ratio: CursorXyRatio

Return the CURSor:XY:RATIO command tree.

Usage

Using the .query() method will send the CURSor:XY:RATIO? query.
Using the .verify(value) method will send the CURSor:XY:RATIO? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.delta: The CURSor:XY:RATIO:DELta command.
.position: The CURSor:XY:RATIO:POSITION<x> command.
.units: The CURSor:XY:RATIO:UNIts command.

rectangular `property` ¶

rectangular: CursorXyRectangular

Return the CURSor:XY:RECTangular command tree.

Usage

Using the .query() method will send the CURSor:XY:RECTangular? query.
Using the .verify(value) method will send the CURSor:XY:RECTangular? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.x: The CURSor:XY:RECTangular:X command tree.
.y: The CURSor:XY:RECTangular:Y command tree.

CursorXyPolar ¶

Bases: SCPICmdRead

The CURSor:XY:POLar command tree.

Usage

Using the .query() method will send the CURSor:XY:POLar? query.
Using the .verify(value) method will send the CURSor:XY:POLar? query and raise an AssertionError if the returned value does not match value.

Properties

.radius: The CURSor:XY:POLar:RADIUS command tree.
.theta: The CURSor:XY:POLar:THETA command tree.

radius `property` ¶

radius: CursorXyPolarRadius

Return the CURSor:XY:POLar:RADIUS command tree.

Usage

Using the .query() method will send the CURSor:XY:POLar:RADIUS? query.
Using the .verify(value) method will send the CURSor:XY:POLar:RADIUS? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.delta: The CURSor:XY:POLar:RADIUS:DELta command.
.position: The CURSor:XY:POLar:RADIUS:POSITION<x> command.
.units: The CURSor:XY:POLar:RADIUS:UNIts command.

theta `property` ¶

theta: CursorXyPolarTheta

Return the CURSor:XY:POLar:THETA command tree.

Usage

Using the .query() method will send the CURSor:XY:POLar:THETA? query.
Using the .verify(value) method will send the CURSor:XY:POLar:THETA? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.delta: The CURSor:XY:POLar:THETA:DELta command.
.position: The CURSor:XY:POLar:THETA:POSITION<x> command.
.units: The CURSor:XY:POLar:THETA:UNIts command.

CursorXyPolarRadius ¶

Bases: SCPICmdRead

The CURSor:XY:POLar:RADIUS command tree.

Usage

Using the .query() method will send the CURSor:XY:POLar:RADIUS? query.
Using the .verify(value) method will send the CURSor:XY:POLar:RADIUS? query and raise an AssertionError if the returned value does not match value.

Properties

.delta: The CURSor:XY:POLar:RADIUS:DELta command.
.position: The CURSor:XY:POLar:RADIUS:POSITION<x> command.
.units: The CURSor:XY:POLar:RADIUS:UNIts command.

delta `property` ¶

delta: CursorXyPolarRadiusDelta

Return the CURSor:XY:POLar:RADIUS:DELta command.

Description

Returns the difference between the cursors X radius and the cursor Y radius (ΔY¸ ΔX). The ratio is calculated as (cursor 2 Y - cursor 1 Y) ÷ (cursor 2 X - cursor 1 X).

Usage

Using the .query() method will send the CURSor:XY:POLar:RADIUS:DELta? query.
Using the .verify(value) method will send the CURSor:XY:POLar:RADIUS:DELta? query and raise an AssertionError if the returned value does not match value.

SCPI Syntax

- CURSor:XY:POLar:RADIUS:DELta?

position `property` ¶

position: dict[int, CursorXyPolarRadiusPositionItem]

Return the CURSor:XY:POLar:RADIUS:POSITION<x> command.

Description

Returns the polar radius for the specified cursor, where x can be either 1 or 2.

Usage

Using the .query() method will send the CURSor:XY:POLar:RADIUS:POSITION<x>? query.
Using the .verify(value) method will send the CURSor:XY:POLar:RADIUS:POSITION<x>? query and raise an AssertionError if the returned value does not match value.

SCPI Syntax

- CURSor:XY:POLar:RADIUS:POSITION<x>?

units `property` ¶

units: CursorXyPolarRadiusUnits

Return the CURSor:XY:POLar:RADIUS:UNIts command.

Description

Returns the polar radius units.

Usage

Using the .query() method will send the CURSor:XY:POLar:RADIUS:UNIts? query.
Using the .verify(value) method will send the CURSor:XY:POLar:RADIUS:UNIts? query and raise an AssertionError if the returned value does not match value.

SCPI Syntax

- CURSor:XY:POLar:RADIUS:UNIts?

CursorXyPolarRadiusDelta ¶

Bases: SCPICmdRead

The CURSor:XY:POLar:RADIUS:DELta command.

Description

Returns the difference between the cursors X radius and the cursor Y radius (ΔY¸ ΔX). The ratio is calculated as (cursor 2 Y - cursor 1 Y) ÷ (cursor 2 X - cursor 1 X).

Usage

Using the .query() method will send the CURSor:XY:POLar:RADIUS:DELta? query.
Using the .verify(value) method will send the CURSor:XY:POLar:RADIUS:DELta? query and raise an AssertionError if the returned value does not match value.

SCPI Syntax

- CURSor:XY:POLar:RADIUS:DELta?

CursorXyPolarRadiusPositionItem ¶

Bases: ValidatedDynamicNumberCmd, SCPICmdRead

The CURSor:XY:POLar:RADIUS:POSITION<x> command.

Description

Returns the polar radius for the specified cursor, where x can be either 1 or 2.

Usage

Using the .query() method will send the CURSor:XY:POLar:RADIUS:POSITION<x>? query.
Using the .verify(value) method will send the CURSor:XY:POLar:RADIUS:POSITION<x>? query and raise an AssertionError if the returned value does not match value.

SCPI Syntax

- CURSor:XY:POLar:RADIUS:POSITION<x>?

CursorXyPolarRadiusUnits ¶

Bases: SCPICmdRead

The CURSor:XY:POLar:RADIUS:UNIts command.

Description

Returns the polar radius units.

Usage

Using the .query() method will send the CURSor:XY:POLar:RADIUS:UNIts? query.
Using the .verify(value) method will send the CURSor:XY:POLar:RADIUS:UNIts? query and raise an AssertionError if the returned value does not match value.

SCPI Syntax

- CURSor:XY:POLar:RADIUS:UNIts?

CursorXyPolarTheta ¶

Bases: SCPICmdRead

The CURSor:XY:POLar:THETA command tree.

Usage

Using the .query() method will send the CURSor:XY:POLar:THETA? query.
Using the .verify(value) method will send the CURSor:XY:POLar:THETA? query and raise an AssertionError if the returned value does not match value.

Properties

.delta: The CURSor:XY:POLar:THETA:DELta command.
.position: The CURSor:XY:POLar:THETA:POSITION<x> command.
.units: The CURSor:XY:POLar:THETA:UNIts command.

delta `property` ¶

delta: CursorXyPolarThetaDelta

Return the CURSor:XY:POLar:THETA:DELta command.

Description

Returns the XY cursor polar angle delta.

Usage

Using the .query() method will send the CURSor:XY:POLar:THETA:DELta? query.
Using the .verify(value) method will send the CURSor:XY:POLar:THETA:DELta? query and raise an AssertionError if the returned value does not match value.

SCPI Syntax

- CURSor:XY:POLar:THETA:DELta?

position `property` ¶

position: dict[int, CursorXyPolarThetaPositionItem]

Return the CURSor:XY:POLar:THETA:POSITION<x> command.

Description

Returns the cursor X or cursor Y polar coordinate, where x is either 1 or 2.

Usage

Using the .query() method will send the CURSor:XY:POLar:THETA:POSITION<x>? query.
Using the .verify(value) method will send the CURSor:XY:POLar:THETA:POSITION<x>? query and raise an AssertionError if the returned value does not match value.

SCPI Syntax

- CURSor:XY:POLar:THETA:POSITION<x>?

units `property` ¶

units: CursorXyPolarThetaUnits

Return the CURSor:XY:POLar:THETA:UNIts command.

Description

Returns the cursor coordinate units.

Usage

Using the .query() method will send the CURSor:XY:POLar:THETA:UNIts? query.
Using the .verify(value) method will send the CURSor:XY:POLar:THETA:UNIts? query and raise an AssertionError if the returned value does not match value.

SCPI Syntax

- CURSor:XY:POLar:THETA:UNIts?

CursorXyPolarThetaDelta ¶

Bases: SCPICmdRead

The CURSor:XY:POLar:THETA:DELta command.

Description

Returns the XY cursor polar angle delta.

Usage

Using the .query() method will send the CURSor:XY:POLar:THETA:DELta? query.
Using the .verify(value) method will send the CURSor:XY:POLar:THETA:DELta? query and raise an AssertionError if the returned value does not match value.

SCPI Syntax

- CURSor:XY:POLar:THETA:DELta?

CursorXyPolarThetaPositionItem ¶

Bases: ValidatedDynamicNumberCmd, SCPICmdRead

The CURSor:XY:POLar:THETA:POSITION<x> command.

Description

Returns the cursor X or cursor Y polar coordinate, where x is either 1 or 2.

Usage

Using the .query() method will send the CURSor:XY:POLar:THETA:POSITION<x>? query.
Using the .verify(value) method will send the CURSor:XY:POLar:THETA:POSITION<x>? query and raise an AssertionError if the returned value does not match value.

SCPI Syntax

- CURSor:XY:POLar:THETA:POSITION<x>?

CursorXyPolarThetaUnits ¶

Bases: SCPICmdRead

The CURSor:XY:POLar:THETA:UNIts command.

Description

Returns the cursor coordinate units.

Usage

Using the .query() method will send the CURSor:XY:POLar:THETA:UNIts? query.
Using the .verify(value) method will send the CURSor:XY:POLar:THETA:UNIts? query and raise an AssertionError if the returned value does not match value.

SCPI Syntax

- CURSor:XY:POLar:THETA:UNIts?

CursorXyProddelta ¶

Bases: SCPICmdRead

The CURSor:XY:PRODDELta command.

Description

This query-only command returns the product of the difference between the cursors X positions and Y positions when the CURSor:XY:READOUT is set to PRODuct. The ΔX × ΔY value is calculated as (Cursor 2 X - Cursor 1 X) × (Cursor 2 Y - Cursor 1 Y).

Usage

Using the .query() method will send the CURSor:XY:PRODDELta? query.
Using the .verify(value) method will send the CURSor:XY:PRODDELta? query and raise an AssertionError if the returned value does not match value.

SCPI Syntax

- CURSor:XY:PRODDELta?

CursorXyProduct ¶

Bases: SCPICmdRead

The CURSor:XY:PRODUCT command tree.

Usage

Using the .query() method will send the CURSor:XY:PRODUCT? query.
Using the .verify(value) method will send the CURSor:XY:PRODUCT? query and raise an AssertionError if the returned value does not match value.

Properties

.delta: The CURSor:XY:PRODUCT:DELta command.
.position: The CURSor:XY:PRODUCT:POSITION<x> command.
.units: The CURSor:XY:PRODUCT:UNIts command.

delta `property` ¶

delta: CursorXyProductDelta

Return the CURSor:XY:PRODUCT:DELta command.

Description

Returns the difference between the cursors X position and cursor Y position. The ΔX × ΔY value is calculated as (X2 - X1) × (Y2 - Y1).

Usage

Using the .query() method will send the CURSor:XY:PRODUCT:DELta? query.
Using the .verify(value) method will send the CURSor:XY:PRODUCT:DELta? query and raise an AssertionError if the returned value does not match value.

SCPI Syntax

- CURSor:XY:PRODUCT:DELta?

position `property` ¶

position: dict[int, CursorXyProductPositionItem]

Return the CURSor:XY:PRODUCT:POSITION<x> command.

Description

Returns the position of the X or Y cursor used to calculate the X × Y cursor measurement, Position 1 = (X1 × Y1); Position 2 = (X2 × Y2). The cursor is specified by x, which can be 1 or 2.

Usage

Using the .query() method will send the CURSor:XY:PRODUCT:POSITION<x>? query.
Using the .verify(value) method will send the CURSor:XY:PRODUCT:POSITION<x>? query and raise an AssertionError if the returned value does not match value.

SCPI Syntax

- CURSor:XY:PRODUCT:POSITION<x>?

units `property` ¶

units: CursorXyProductUnits

Return the CURSor:XY:PRODUCT:UNIts command.

Description

Returns the XY cursor product units.

Usage

Using the .query() method will send the CURSor:XY:PRODUCT:UNIts? query.
Using the .verify(value) method will send the CURSor:XY:PRODUCT:UNIts? query and raise an AssertionError if the returned value does not match value.

SCPI Syntax

- CURSor:XY:PRODUCT:UNIts?

CursorXyProductDelta ¶

Bases: SCPICmdRead

The CURSor:XY:PRODUCT:DELta command.

Description

Returns the difference between the cursors X position and cursor Y position. The ΔX × ΔY value is calculated as (X2 - X1) × (Y2 - Y1).

Usage

Using the .query() method will send the CURSor:XY:PRODUCT:DELta? query.
Using the .verify(value) method will send the CURSor:XY:PRODUCT:DELta? query and raise an AssertionError if the returned value does not match value.

SCPI Syntax

- CURSor:XY:PRODUCT:DELta?

CursorXyProductPositionItem ¶

Bases: ValidatedDynamicNumberCmd, SCPICmdRead

The CURSor:XY:PRODUCT:POSITION<x> command.

Description

Returns the position of the X or Y cursor used to calculate the X × Y cursor measurement, Position 1 = (X1 × Y1); Position 2 = (X2 × Y2). The cursor is specified by x, which can be 1 or 2.

Usage

Using the .query() method will send the CURSor:XY:PRODUCT:POSITION<x>? query.
Using the .verify(value) method will send the CURSor:XY:PRODUCT:POSITION<x>? query and raise an AssertionError if the returned value does not match value.

SCPI Syntax

- CURSor:XY:PRODUCT:POSITION<x>?

CursorXyProductUnits ¶

Bases: SCPICmdRead

The CURSor:XY:PRODUCT:UNIts command.

Description

Returns the XY cursor product units.

Usage

Using the .query() method will send the CURSor:XY:PRODUCT:UNIts? query.
Using the .verify(value) method will send the CURSor:XY:PRODUCT:UNIts? query and raise an AssertionError if the returned value does not match value.

SCPI Syntax

- CURSor:XY:PRODUCT:UNIts?

CursorXyRatio ¶

Bases: SCPICmdRead

The CURSor:XY:RATIO command tree.

Usage

Using the .query() method will send the CURSor:XY:RATIO? query.
Using the .verify(value) method will send the CURSor:XY:RATIO? query and raise an AssertionError if the returned value does not match value.

Properties

.delta: The CURSor:XY:RATIO:DELta command.
.position: The CURSor:XY:RATIO:POSITION<x> command.
.units: The CURSor:XY:RATIO:UNIts command.

delta `property` ¶

delta: CursorXyRatioDelta

Return the CURSor:XY:RATIO:DELta command.

Description

Returns the ratio of the difference between the cursors X position and cursor Y position (ΔY¸ ΔX). The ratio is calculated as (Y2 - Y1) / (X2 - X1).

Usage

Using the .query() method will send the CURSor:XY:RATIO:DELta? query.
Using the .verify(value) method will send the CURSor:XY:RATIO:DELta? query and raise an AssertionError if the returned value does not match value.

SCPI Syntax

- CURSor:XY:RATIO:DELta?

position `property` ¶

position: dict[int, CursorXyRatioPositionItem]

Return the CURSor:XY:RATIO:POSITION<x> command.

Description

Returns the X (horizontal) or Y (vertical) position for the specified cursor, which can be 1 (X) or 2 (Y). The ratio is calculated as Position 1 = (Y1/X1); Position 2 = (Y2/X2).

Usage

Using the .query() method will send the CURSor:XY:RATIO:POSITION<x>? query.
Using the .verify(value) method will send the CURSor:XY:RATIO:POSITION<x>? query and raise an AssertionError if the returned value does not match value.

SCPI Syntax

- CURSor:XY:RATIO:POSITION<x>?

units `property` ¶

units: CursorXyRatioUnits

Return the CURSor:XY:RATIO:UNIts command.

Description

Returns the cursor X and cursor Y units for the ratio measurement.

Usage

Using the .query() method will send the CURSor:XY:RATIO:UNIts? query.
Using the .verify(value) method will send the CURSor:XY:RATIO:UNIts? query and raise an AssertionError if the returned value does not match value.

SCPI Syntax

- CURSor:XY:RATIO:UNIts?

CursorXyRatioDelta ¶

Bases: SCPICmdRead

The CURSor:XY:RATIO:DELta command.

Description

Returns the ratio of the difference between the cursors X position and cursor Y position (ΔY¸ ΔX). The ratio is calculated as (Y2 - Y1) / (X2 - X1).

Usage

Using the .query() method will send the CURSor:XY:RATIO:DELta? query.
Using the .verify(value) method will send the CURSor:XY:RATIO:DELta? query and raise an AssertionError if the returned value does not match value.

SCPI Syntax

- CURSor:XY:RATIO:DELta?

CursorXyRatioPositionItem ¶

Bases: ValidatedDynamicNumberCmd, SCPICmdRead

The CURSor:XY:RATIO:POSITION<x> command.

Description

Returns the X (horizontal) or Y (vertical) position for the specified cursor, which can be 1 (X) or 2 (Y). The ratio is calculated as Position 1 = (Y1/X1); Position 2 = (Y2/X2).

Usage

Using the .query() method will send the CURSor:XY:RATIO:POSITION<x>? query.
Using the .verify(value) method will send the CURSor:XY:RATIO:POSITION<x>? query and raise an AssertionError if the returned value does not match value.

SCPI Syntax

- CURSor:XY:RATIO:POSITION<x>?

CursorXyRatioUnits ¶

Bases: SCPICmdRead

The CURSor:XY:RATIO:UNIts command.

Description

Returns the cursor X and cursor Y units for the ratio measurement.

Usage

Using the .query() method will send the CURSor:XY:RATIO:UNIts? query.
Using the .verify(value) method will send the CURSor:XY:RATIO:UNIts? query and raise an AssertionError if the returned value does not match value.

SCPI Syntax

- CURSor:XY:RATIO:UNIts?

CursorXyRectangular ¶

Bases: SCPICmdRead

The CURSor:XY:RECTangular command tree.

Usage

Using the .query() method will send the CURSor:XY:RECTangular? query.
Using the .verify(value) method will send the CURSor:XY:RECTangular? query and raise an AssertionError if the returned value does not match value.

Properties

.x: The CURSor:XY:RECTangular:X command tree.
.y: The CURSor:XY:RECTangular:Y command tree.

x `property` ¶

x: CursorXyRectangularX

Return the CURSor:XY:RECTangular:X command tree.

Usage

Using the .query() method will send the CURSor:XY:RECTangular:X? query.
Using the .verify(value) method will send the CURSor:XY:RECTangular:X? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.delta: The CURSor:XY:RECTangular:X:DELta command.
.position: The CURSor:XY:RECTangular:X:POSITION<x> command.
.units: The CURSor:XY:RECTangular:X:UNIts command.

y `property` ¶

y: CursorXyRectangularY

Return the CURSor:XY:RECTangular:Y command tree.

Usage

Using the .query() method will send the CURSor:XY:RECTangular:Y? query.
Using the .verify(value) method will send the CURSor:XY:RECTangular:Y? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.delta: The CURSor:XY:RECTangular:Y:DELta command.
.position: The CURSor:XY:RECTangular:Y:POSITION<x> command.
.units: The CURSor:XY:RECTangular:Y:UNIts command.

CursorXyRectangularX ¶

Bases: SCPICmdRead

The CURSor:XY:RECTangular:X command tree.

Usage

Using the .query() method will send the CURSor:XY:RECTangular:X? query.
Using the .verify(value) method will send the CURSor:XY:RECTangular:X? query and raise an AssertionError if the returned value does not match value.

Properties

.delta: The CURSor:XY:RECTangular:X:DELta command.
.position: The CURSor:XY:RECTangular:X:POSITION<x> command.
.units: The CURSor:XY:RECTangular:X:UNIts command.

delta `property` ¶

delta: CursorXyRectangularXDelta

Return the CURSor:XY:RECTangular:X:DELta command.

Description

Returns the cursor X delta value in rectangular coordinates.

Usage

Using the .query() method will send the CURSor:XY:RECTangular:X:DELta? query.
Using the .verify(value) method will send the CURSor:XY:RECTangular:X:DELta? query and raise an AssertionError if the returned value does not match value.

SCPI Syntax

- CURSor:XY:RECTangular:X:DELta?

position `property` ¶

position: dict[int, CursorXyRectangularXPositionItem]

Return the CURSor:XY:RECTangular:X:POSITION<x> command.

Description

This command specifies the X rectangular coordinate for cursor 1 or cursor 2. The cursor is specified by x and can be either 1 or 2.

Usage

Using the .query() method will send the CURSor:XY:RECTangular:X:POSITION<x>? query.
Using the .verify(value) method will send the CURSor:XY:RECTangular:X:POSITION<x>? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the CURSor:XY:RECTangular:X:POSITION<x> value command.

SCPI Syntax

- CURSor:XY:RECTangular:X:POSITION<x> <NR3>
- CURSor:XY:RECTangular:X:POSITION<x>?

Info

<NR3> is a floating point number that specifies the coordinate in volts.

units `property` ¶

units: CursorXyRectangularXUnits

Return the CURSor:XY:RECTangular:X:UNIts command.

Description

Returns the cursor X rectangular units.

Usage

Using the .query() method will send the CURSor:XY:RECTangular:X:UNIts? query.
Using the .verify(value) method will send the CURSor:XY:RECTangular:X:UNIts? query and raise an AssertionError if the returned value does not match value.

SCPI Syntax

- CURSor:XY:RECTangular:X:UNIts?

CursorXyRectangularXDelta ¶

Bases: SCPICmdRead

The CURSor:XY:RECTangular:X:DELta command.

Description

Returns the cursor X delta value in rectangular coordinates.

Usage

Using the .query() method will send the CURSor:XY:RECTangular:X:DELta? query.
Using the .verify(value) method will send the CURSor:XY:RECTangular:X:DELta? query and raise an AssertionError if the returned value does not match value.

SCPI Syntax

- CURSor:XY:RECTangular:X:DELta?

CursorXyRectangularXPositionItem ¶

Bases: ValidatedDynamicNumberCmd, SCPICmdWrite, SCPICmdRead

The CURSor:XY:RECTangular:X:POSITION<x> command.

Description

This command specifies the X rectangular coordinate for cursor 1 or cursor 2. The cursor is specified by x and can be either 1 or 2.

Usage

Using the .query() method will send the CURSor:XY:RECTangular:X:POSITION<x>? query.
Using the .verify(value) method will send the CURSor:XY:RECTangular:X:POSITION<x>? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the CURSor:XY:RECTangular:X:POSITION<x> value command.

SCPI Syntax

- CURSor:XY:RECTangular:X:POSITION<x> <NR3>
- CURSor:XY:RECTangular:X:POSITION<x>?

Info

<NR3> is a floating point number that specifies the coordinate in volts.

CursorXyRectangularXUnits ¶

Bases: SCPICmdRead

The CURSor:XY:RECTangular:X:UNIts command.

Description

Returns the cursor X rectangular units.

Usage

Using the .query() method will send the CURSor:XY:RECTangular:X:UNIts? query.
Using the .verify(value) method will send the CURSor:XY:RECTangular:X:UNIts? query and raise an AssertionError if the returned value does not match value.

SCPI Syntax

- CURSor:XY:RECTangular:X:UNIts?

CursorXyRectangularY ¶

Bases: SCPICmdRead

The CURSor:XY:RECTangular:Y command tree.

Usage

Using the .query() method will send the CURSor:XY:RECTangular:Y? query.
Using the .verify(value) method will send the CURSor:XY:RECTangular:Y? query and raise an AssertionError if the returned value does not match value.

Properties

.delta: The CURSor:XY:RECTangular:Y:DELta command.
.position: The CURSor:XY:RECTangular:Y:POSITION<x> command.
.units: The CURSor:XY:RECTangular:Y:UNIts command.

delta `property` ¶

delta: CursorXyRectangularYDelta

Return the CURSor:XY:RECTangular:Y:DELta command.

Description

Returns The cursor Y delta value in rectangular coordinates.

Usage

Using the .query() method will send the CURSor:XY:RECTangular:Y:DELta? query.
Using the .verify(value) method will send the CURSor:XY:RECTangular:Y:DELta? query and raise an AssertionError if the returned value does not match value.

SCPI Syntax

- CURSor:XY:RECTangular:Y:DELta?

position `property` ¶

position: dict[int, CursorXyRectangularYPositionItem]

Return the CURSor:XY:RECTangular:Y:POSITION<x> command.

Description

This command specifies the Y rectangular coordinate for cursor 1 or cursor 2. The cursor is specified by x and can be either 1 or 2.

Usage

Using the .query() method will send the CURSor:XY:RECTangular:Y:POSITION<x>? query.
Using the .verify(value) method will send the CURSor:XY:RECTangular:Y:POSITION<x>? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the CURSor:XY:RECTangular:Y:POSITION<x> value command.

SCPI Syntax

- CURSor:XY:RECTangular:Y:POSITION<x> <NR3>
- CURSor:XY:RECTangular:Y:POSITION<x>?

Info

<NR3> is a floating point number that specifies the coordinate in volts.

units `property` ¶

units: CursorXyRectangularYUnits

Return the CURSor:XY:RECTangular:Y:UNIts command.

Description

Returns the cursor Y rectangular units.

Usage

Using the .query() method will send the CURSor:XY:RECTangular:Y:UNIts? query.
Using the .verify(value) method will send the CURSor:XY:RECTangular:Y:UNIts? query and raise an AssertionError if the returned value does not match value.

SCPI Syntax

- CURSor:XY:RECTangular:Y:UNIts?

CursorXyRectangularYDelta ¶

Bases: SCPICmdRead

The CURSor:XY:RECTangular:Y:DELta command.

Description

Returns The cursor Y delta value in rectangular coordinates.

Usage

Using the .query() method will send the CURSor:XY:RECTangular:Y:DELta? query.
Using the .verify(value) method will send the CURSor:XY:RECTangular:Y:DELta? query and raise an AssertionError if the returned value does not match value.

SCPI Syntax

- CURSor:XY:RECTangular:Y:DELta?

CursorXyRectangularYPositionItem ¶

Bases: ValidatedDynamicNumberCmd, SCPICmdWrite, SCPICmdRead

The CURSor:XY:RECTangular:Y:POSITION<x> command.

Description

This command specifies the Y rectangular coordinate for cursor 1 or cursor 2. The cursor is specified by x and can be either 1 or 2.

Usage

Using the .query() method will send the CURSor:XY:RECTangular:Y:POSITION<x>? query.
Using the .verify(value) method will send the CURSor:XY:RECTangular:Y:POSITION<x>? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the CURSor:XY:RECTangular:Y:POSITION<x> value command.

SCPI Syntax

- CURSor:XY:RECTangular:Y:POSITION<x> <NR3>
- CURSor:XY:RECTangular:Y:POSITION<x>?

Info

<NR3> is a floating point number that specifies the coordinate in volts.

CursorXyRectangularYUnits ¶

Bases: SCPICmdRead

The CURSor:XY:RECTangular:Y:UNIts command.

Description

Returns the cursor Y rectangular units.

Usage

Using the .query() method will send the CURSor:XY:RECTangular:Y:UNIts? query.
Using the .verify(value) method will send the CURSor:XY:RECTangular:Y:UNIts? query and raise an AssertionError if the returned value does not match value.

SCPI Syntax

- CURSor:XY:RECTangular:Y:UNIts?

cursor ¶

Cursor ¶

function property ¶

hbars property ¶

mode property ¶

vbars property ¶

xy property ¶

CursorFunction ¶

CursorHbars ¶

delta property ¶

position property ¶

units property ¶

use property ¶

CursorHbarsDelta ¶

CursorHbarsPositionItem ¶

CursorHbarsUnits ¶

CursorHbarsUse ¶

CursorMode ¶

CursorVbars ¶

alternate property ¶

delta property ¶

hpos property ¶

position property ¶

units property ¶

use property ¶

vdelta property ¶

CursorVbarsAlternateItem ¶

CursorVbarsDelta ¶

CursorVbarsHposItem ¶

CursorVbarsPositionItem ¶

CursorVbarsUnits ¶

CursorVbarsUse ¶

CursorVbarsVdelta ¶

CursorXy ¶

polar property ¶

proddelta property ¶

product property ¶

ratio property ¶

rectangular property ¶

CursorXyPolar ¶

radius property ¶

theta property ¶

CursorXyPolarRadius ¶

delta property ¶

position property ¶

units property ¶

CursorXyPolarRadiusDelta ¶

CursorXyPolarRadiusPositionItem ¶

CursorXyPolarRadiusUnits ¶

CursorXyPolarTheta ¶

delta property ¶

position property ¶

units property ¶

CursorXyPolarThetaDelta ¶

CursorXyPolarThetaPositionItem ¶

CursorXyPolarThetaUnits ¶

CursorXyProddelta ¶

CursorXyProduct ¶

delta property ¶

position property ¶

units property ¶

CursorXyProductDelta ¶

CursorXyProductPositionItem ¶

CursorXyProductUnits ¶

CursorXyRatio ¶

delta property ¶

position property ¶

units property ¶

CursorXyRatioDelta ¶

CursorXyRatioPositionItem ¶

CursorXyRatioUnits ¶

CursorXyRectangular ¶

x property ¶

y property ¶

CursorXyRectangularX ¶

delta property ¶

position property ¶

units property ¶

CursorXyRectangularXDelta ¶

CursorXyRectangularXPositionItem ¶

function `property` ¶

hbars `property` ¶

mode `property` ¶

vbars `property` ¶

xy `property` ¶

delta `property` ¶

position `property` ¶

units `property` ¶

use `property` ¶

alternate `property` ¶

delta `property` ¶

hpos `property` ¶

position `property` ¶

units `property` ¶

use `property` ¶

vdelta `property` ¶

polar `property` ¶

proddelta `property` ¶

product `property` ¶

ratio `property` ¶

rectangular `property` ¶

radius `property` ¶

theta `property` ¶

delta `property` ¶

position `property` ¶

units `property` ¶

delta `property` ¶

position `property` ¶

units `property` ¶

delta `property` ¶

position `property` ¶

units `property` ¶

delta `property` ¶

position `property` ¶

units `property` ¶

x `property` ¶

y `property` ¶

delta `property` ¶

position `property` ¶

units `property` ¶

delta `property` ¶

position `property` ¶

units `property` ¶