zoom ¶

The zoom commands module.

These commands are used in the following models: DPO5K, DPO5KB, DPO70KC, DPO70KD, DPO70KDX, DPO70KSX, DPO7K, DPO7KC, DSA70KC, DSA70KD, MSO5K, MSO5KB, MSO70KC, MSO70KDX

THIS FILE IS AUTO-GENERATED, IT SHOULD NOT BE MANUALLY MODIFIED.

Please report an issue if one is found.

Commands and Queries

- ZOOm {RESET|RESETLive}
- ZOOm:GRAticule:SIZE {50|80|100}
- ZOOm:GRAticule:SIZE?
- ZOOm:GRAticule:SPLit {FIFtyfifty|EIGHtytwenty|FuLl}
- ZOOm:GRAticule:SPLit?
- ZOOm:HORizontal:POSition <NR3>
- ZOOm:HORizontal:POSition?
- ZOOm:HORizontal:SCAle <NR3>
- ZOOm:HORizontal:SCAle?
- ZOOm:MATH<x>:HORizontal:POSition <NR3>
- ZOOm:MATH<x>:HORizontal:POSition?
- ZOOm:MATH<x>:HORizontal:SCAle <NR3>
- ZOOm:MATH<x>:HORizontal:SCAle?
- ZOOm:MATH<x>:VERTical:POSition <NR3>
- ZOOm:MATH<x>:VERTical:POSition?
- ZOOm:MATH<x>:VERTical:SCAle <NR3>
- ZOOm:MATH<x>:VERTical:SCAle?
- ZOOm:MODe {ON|OFF|<NR1>}
- ZOOm:REF<x>:HORizontal:POSition <NR3>
- ZOOm:REF<x>:HORizontal:POSition?
- ZOOm:REF<x>:HORizontal:SCAle <NR3>
- ZOOm:REF<x>:HORizontal:SCAle?
- ZOOm:REF<x>:VERTical:POSition <NR3>
- ZOOm:REF<x>:VERTical:POSition?
- ZOOm:REF<x>:VERTical:SCAle <NR3>
- ZOOm:REF<x>:VERTical:SCAle?
- ZOOm:SCROLL:DIREction {FWD|FFWD|REV|FREV|STOP}
- ZOOm:SCROLL:DIREction?
- ZOOm:SCROLL:LOCk {ON|OFF|<NR1>}
- ZOOm:SCROLL:LOCk?
- ZOOm:SCROLL:SPEED <NR1>
- ZOOm:SCROLL:SPEED?
- ZOOm:STATE {ON|OFF|<NR1>}
- ZOOm:STATE?
- ZOOm:VERTical:POSition <NR3>
- ZOOm:VERTical:POSition?
- ZOOm:VERTical:SCAle <NR3>
- ZOOm:VERTical:SCAle?
- ZOOm:ZOOM1 {RESET|RESETLive}
- ZOOm:ZOOM1:CH<x>:DISplay {ON|OFF|<NR1>}
- ZOOm:ZOOM1:CH<x>:DISplay?
- ZOOm:ZOOM1:CH<x>:HORizontal:POSition <NR3>
- ZOOm:ZOOM1:CH<x>:HORizontal:POSition?
- ZOOm:ZOOM1:CH<x>:HORizontal:SCAle <NR3>
- ZOOm:ZOOM1:CH<x>:HORizontal:SCAle?
- ZOOm:ZOOM1:CH<x>:VERTical:POSition <NR3>
- ZOOm:ZOOM1:CH<x>:VERTical:POSition?
- ZOOm:ZOOM1:CH<x>:VERTical:SCAle <NR3>
- ZOOm:ZOOM1:CH<x>:VERTical:SCAle?
- ZOOm:ZOOM1:D<x>:DISplay {ON|OFF|<NR1>}
- ZOOm:ZOOM1:D<x>:DISplay?
- ZOOm:ZOOM1:D<x>:HORizontal:POSition <NR3>
- ZOOm:ZOOM1:D<x>:HORizontal:POSition?
- ZOOm:ZOOM1:D<x>:HORizontal:SCAle <NR3>
- ZOOm:ZOOM1:D<x>:HORizontal:SCAle?
- ZOOm:ZOOM1:D<x>:VERTical:POSition <NR3>
- ZOOm:ZOOM1:D<x>:VERTical:POSition?
- ZOOm:ZOOM1:D<x>:VERTical:SCAle <NR3>
- ZOOm:ZOOM1:D<x>:VERTical:SCAle?
- ZOOm:ZOOM1:DCHAN:DISplay {ON|OFF|<NR1>}
- ZOOm:ZOOM1:DCHAN:DISplay?
- ZOOm:ZOOM1:MATH<x>:DISplay {ON|OFF|<NR1>}
- ZOOm:ZOOM1:MATH<x>:DISplay?
- ZOOm:ZOOM1:MATH<x>:HORizontal:POSition <NR3>
- ZOOm:ZOOM1:MATH<x>:HORizontal:POSition?
- ZOOm:ZOOM1:MATH<x>:HORizontal:SCAle <NR3>
- ZOOm:ZOOM1:MATH<x>:HORizontal:SCAle?
- ZOOm:ZOOM1:MATH<x>:VERTical:POSition <NR3>
- ZOOm:ZOOM1:MATH<x>:VERTical:POSition?
- ZOOm:ZOOM1:MATH<x>:VERTical:SCAle <NR3>
- ZOOm:ZOOM1:MATH<x>:VERTical:SCAle?
- ZOOm:ZOOM1:REF<x>:DISplay {ON|OFF|<NR1>}
- ZOOm:ZOOM1:REF<x>:DISplay?
- ZOOm:ZOOM1:REF<x>:HORizontal:POSition <NR3>
- ZOOm:ZOOM1:REF<x>:HORizontal:POSition?
- ZOOm:ZOOM1:REF<x>:HORizontal:SCAle <NR3>
- ZOOm:ZOOM1:REF<x>:HORizontal:SCAle?
- ZOOm:ZOOM1:REF<x>:VERTical:POSition <NR3>
- ZOOm:ZOOM1:REF<x>:VERTical:POSition?
- ZOOm:ZOOM1:REF<x>:VERTical:SCAle <NR3>
- ZOOm:ZOOM1:REF<x>:VERTical:SCAle?
- ZOOm:ZOOM1:SCROLLLock {ON|OFF|<NR1>}
- ZOOm:ZOOM1:SCROLLLock?
- ZOOm:ZOOM1:STATE {ON|OFF|<NR1>}
- ZOOm:ZOOM1:STATE?
- ZOOm:ZOOM1?
- ZOOm?

Zoom ¶

Bases: SCPICmdWrite, SCPICmdRead

The ZOOm command.

Description

This command resets the zoom transforms to default values for all traces or live traces. The ZOOm query returns the current vertical and horizontal positioning and scaling of the display.

Usage

Using the .query() method will send the ZOOm? query.
Using the .verify(value) method will send the ZOOm? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the ZOOm value command.

SCPI Syntax

- ZOOm {RESET|RESETLive}
- ZOOm?

Info

RESET resets the zoom transforms to default values for all traces.
RESETLive resets the zoom transforms to default values for live traces.

Properties

.graticule: The ZOOm:GRAticule command tree.
.horizontal: The ZOOm:HORizontal command tree.
.math: The ZOOm:MATH<x> command tree.
.mode: The ZOOm:MODe command.
.ref: The ZOOm:REF<x> command tree.
.scroll: The ZOOm:SCROLL command tree.
.state: The ZOOm:STATE command.
.vertical: The ZOOm:VERTical command tree.
.zoom1: The ZOOm:ZOOM1 command.

graticule `property` ¶

graticule: ZoomGraticule

Return the ZOOm:GRAticule command tree.

Usage

Using the .query() method will send the ZOOm:GRAticule? query.
Using the .verify(value) method will send the ZOOm:GRAticule? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.size: The ZOOm:GRAticule:SIZE command.
.split: The ZOOm:GRAticule:SPLit command.

horizontal `property` ¶

horizontal: ZoomHorizontal

Return the ZOOm:HORizontal command tree.

Usage

Using the .query() method will send the ZOOm:HORizontal? query.
Using the .verify(value) method will send the ZOOm:HORizontal? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.position: The ZOOm:HORizontal:POSition command.
.scale: The ZOOm:HORizontal:SCAle command.

math `property` ¶

math: dict[int, ZoomMathItem]

Return the ZOOm:MATH<x> command tree.

Usage

Using the .query() method will send the ZOOm:MATH<x>? query.
Using the .verify(value) method will send the ZOOm:MATH<x>? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.horizontal: The ZOOm:MATH<x>:HORizontal command tree.
.vertical: The ZOOm:MATH<x>:VERTical command tree.

mode `property` ¶

mode: ZoomMode

Return the ZOOm:MODe command.

Description

This command turns Zoom mode on or off. The Zoom query returns the current state of Zoom mode. This command is equivalent to pressing the ZOOM button located on the front panel.

Usage

Using the .write(value) method will send the ZOOm:MODe value command.

SCPI Syntax

- ZOOm:MODe {ON|OFF|<NR1>}

Info

ON turns on Zoom mode.
OFF turns off Zoom mode.
<NR1> = 0 turns off Zoom mode; any other value turns on Zoom mode.

ref `property` ¶

ref: dict[int, ZoomRefItem]

Return the ZOOm:REF<x> command tree.

Usage

Using the .query() method will send the ZOOm:REF<x>? query.
Using the .verify(value) method will send the ZOOm:REF<x>? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.horizontal: The ZOOm:REF<x>:HORizontal command tree.
.vertical: The ZOOm:REF<x>:VERTical command tree.

scroll `property` ¶

scroll: ZoomScroll

Return the ZOOm:SCROLL command tree.

Usage

Using the .query() method will send the ZOOm:SCROLL? query.
Using the .verify(value) method will send the ZOOm:SCROLL? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.direction: The ZOOm:SCROLL:DIREction command.
.lock: The ZOOm:SCROLL:LOCk command.
.speed: The ZOOm:SCROLL:SPEED command.

state `property` ¶

state: ZoomState

Return the ZOOm:STATE command.

Description

This command sets or queries the specified zoom on or off.

Usage

Using the .query() method will send the ZOOm:STATE? query.
Using the .verify(value) method will send the ZOOm:STATE? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the ZOOm:STATE value command.

SCPI Syntax

- ZOOm:STATE {ON|OFF|<NR1>}
- ZOOm:STATE?

Info

ON turns zoom on or off.
OFF turns zoom on or off.
<NR1> = 0 disables the zoom; any other value enables the zoom.

vertical `property` ¶

vertical: ZoomVertical

Return the ZOOm:VERTical command tree.

Usage

Using the .query() method will send the ZOOm:VERTical? query.
Using the .verify(value) method will send the ZOOm:VERTical? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.position: The ZOOm:VERTical:POSition command.
.scale: The ZOOm:VERTical:SCAle command.

zoom1 `property` ¶

zoom1: ZoomZoom1

Return the ZOOm:ZOOM1 command.

Description

This command resets the zoom transforms to default values for all traces of the specified zoom, where x is an integer from 1 to 4 representing the desired zoom window. The ZOOM:REFX:VERTICAL:SCALE? query returns the current vertical and horizontal positioning and scaling of the display.

Usage

Using the .query() method will send the ZOOm:ZOOM1? query.
Using the .verify(value) method will send the ZOOm:ZOOM1? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the ZOOm:ZOOM1 value command.

SCPI Syntax

- ZOOm:ZOOM1 {RESET|RESETLive}
- ZOOm:ZOOM1?

Info

RESET resets the zoom transforms to default values for all traces of the specified zoom.
RESETLive resets the zoom transforms to default values for live traces of the specified zoom.

Sub-properties

.dchan: The ZOOm:ZOOM1:DCHAN command tree.
.scrolllock: The ZOOm:ZOOM1:SCROLLLock command.
.state: The ZOOm:ZOOM1:STATE command.
.ch: The ZOOm:ZOOM1:CH<x> command tree.
.math: The ZOOm:ZOOM1:MATH<x> command tree.
.ref: The ZOOm:ZOOM1:REF<x> command tree.
.d: The ZOOm:ZOOM1:D<x> command tree.

ZoomGraticule ¶

Bases: SCPICmdRead

The ZOOm:GRAticule command tree.

Usage

Using the .query() method will send the ZOOm:GRAticule? query.
Using the .verify(value) method will send the ZOOm:GRAticule? query and raise an AssertionError if the returned value does not match value.

Properties

.size: The ZOOm:GRAticule:SIZE command.
.split: The ZOOm:GRAticule:SPLit command.

size `property` ¶

size: ZoomGraticuleSize

Return the ZOOm:GRAticule:SIZE command.

Description

This command sets or queries the size in percent, of the Zoom (lower) graticule.

Usage

Using the .query() method will send the ZOOm:GRAticule:SIZE? query.
Using the .verify(value) method will send the ZOOm:GRAticule:SIZE? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the ZOOm:GRAticule:SIZE value command.

SCPI Syntax

- ZOOm:GRAticule:SIZE {50|80|100}
- ZOOm:GRAticule:SIZE?

Info

50 sets the size of the Zoom graticule to 50%.
80 set the size of the Zoom graticule to 80%.
100 sets the size of the Zoom graticule to 100%.

split `property` ¶

split: ZoomGraticuleSplit

Return the ZOOm:GRAticule:SPLit command.

Description

This command sets or queries the sizes of the acquisition and zoom windows when Zoom is selected.

Usage

Using the .query() method will send the ZOOm:GRAticule:SPLit? query.
Using the .verify(value) method will send the ZOOm:GRAticule:SPLit? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the ZOOm:GRAticule:SPLit value command.

SCPI Syntax

- ZOOm:GRAticule:SPLit {FIFtyfifty|EIGHtytwenty|FuLl}
- ZOOm:GRAticule:SPLit?

Info

FIFtyfifty argument sets half of the available display to the zoomed graticule and half of the available display to the acquisition graticule; this argument is the default value.
EIGHtytwenty argument sets 80% of the available display to the zoomed graticule and 20% to the acquisition graticule.
FULl argument sets the entire display to the zoomed graticule.

ZoomGraticuleSize ¶

Bases: SCPICmdWrite, SCPICmdRead

The ZOOm:GRAticule:SIZE command.

Description

This command sets or queries the size in percent, of the Zoom (lower) graticule.

Usage

Using the .query() method will send the ZOOm:GRAticule:SIZE? query.
Using the .verify(value) method will send the ZOOm:GRAticule:SIZE? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the ZOOm:GRAticule:SIZE value command.

SCPI Syntax

- ZOOm:GRAticule:SIZE {50|80|100}
- ZOOm:GRAticule:SIZE?

Info

50 sets the size of the Zoom graticule to 50%.
80 set the size of the Zoom graticule to 80%.
100 sets the size of the Zoom graticule to 100%.

ZoomGraticuleSplit ¶

Bases: SCPICmdWrite, SCPICmdRead

The ZOOm:GRAticule:SPLit command.

Description

This command sets or queries the sizes of the acquisition and zoom windows when Zoom is selected.

Usage

Using the .query() method will send the ZOOm:GRAticule:SPLit? query.
Using the .verify(value) method will send the ZOOm:GRAticule:SPLit? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the ZOOm:GRAticule:SPLit value command.

SCPI Syntax

- ZOOm:GRAticule:SPLit {FIFtyfifty|EIGHtytwenty|FuLl}
- ZOOm:GRAticule:SPLit?

Info

FIFtyfifty argument sets half of the available display to the zoomed graticule and half of the available display to the acquisition graticule; this argument is the default value.
EIGHtytwenty argument sets 80% of the available display to the zoomed graticule and 20% to the acquisition graticule.
FULl argument sets the entire display to the zoomed graticule.

ZoomHorizontal ¶

Bases: SCPICmdRead

The ZOOm:HORizontal command tree.

Usage

Using the .query() method will send the ZOOm:HORizontal? query.
Using the .verify(value) method will send the ZOOm:HORizontal? query and raise an AssertionError if the returned value does not match value.

Properties

.position: The ZOOm:HORizontal:POSition command.
.scale: The ZOOm:HORizontal:SCAle command.

position `property` ¶

position: ZoomHorizontalPosition

Return the ZOOm:HORizontal:POSition command.

Description

This command sets or queries the horizontal position around which the zoom waveform is displayed. It is freely movable within the confines of the acquired waveform (0% to 100%) and measured from left to right of the acquired waveform.

Usage

Using the .query() method will send the ZOOm:HORizontal:POSition? query.
Using the .verify(value) method will send the ZOOm:HORizontal:POSition? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the ZOOm:HORizontal:POSition value command.

SCPI Syntax

- ZOOm:HORizontal:POSition <NR3>
- ZOOm:HORizontal:POSition?

Info

<NR3> is a value from 0 to 100.00 and is the percent of the waveform that is to the left of screen center, when the zoom factor is 1× or greater.

scale `property` ¶

scale: ZoomHorizontalScale

Return the ZOOm:HORizontal:SCAle command.

Description

This command sets or queries the zoom horizontal scale factor around which the zoom waveform is displayed.

Usage

Using the .query() method will send the ZOOm:HORizontal:SCAle? query.
Using the .verify(value) method will send the ZOOm:HORizontal:SCAle? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the ZOOm:HORizontal:SCAle value command.

SCPI Syntax

- ZOOm:HORizontal:SCAle <NR3>
- ZOOm:HORizontal:SCAle?

Info

<NR3> is the amount of expansion in the horizontal direction in 1-2-5 increments.

ZoomHorizontalPosition ¶

Bases: SCPICmdWrite, SCPICmdRead

The ZOOm:HORizontal:POSition command.

Description

This command sets or queries the horizontal position around which the zoom waveform is displayed. It is freely movable within the confines of the acquired waveform (0% to 100%) and measured from left to right of the acquired waveform.

Usage

Using the .query() method will send the ZOOm:HORizontal:POSition? query.
Using the .verify(value) method will send the ZOOm:HORizontal:POSition? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the ZOOm:HORizontal:POSition value command.

SCPI Syntax

- ZOOm:HORizontal:POSition <NR3>
- ZOOm:HORizontal:POSition?

Info

<NR3> is a value from 0 to 100.00 and is the percent of the waveform that is to the left of screen center, when the zoom factor is 1× or greater.

ZoomHorizontalScale ¶

Bases: SCPICmdWrite, SCPICmdRead

The ZOOm:HORizontal:SCAle command.

Description

This command sets or queries the zoom horizontal scale factor around which the zoom waveform is displayed.

Usage

Using the .query() method will send the ZOOm:HORizontal:SCAle? query.
Using the .verify(value) method will send the ZOOm:HORizontal:SCAle? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the ZOOm:HORizontal:SCAle value command.

SCPI Syntax

- ZOOm:HORizontal:SCAle <NR3>
- ZOOm:HORizontal:SCAle?

Info

<NR3> is the amount of expansion in the horizontal direction in 1-2-5 increments.

ZoomMathItem ¶

Bases: ValidatedDynamicNumberCmd, SCPICmdRead

The ZOOm:MATH<x> command tree.

Usage

Using the .query() method will send the ZOOm:MATH<x>? query.
Using the .verify(value) method will send the ZOOm:MATH<x>? query and raise an AssertionError if the returned value does not match value.

Properties

.horizontal: The ZOOm:MATH<x>:HORizontal command tree.
.vertical: The ZOOm:MATH<x>:VERTical command tree.

horizontal `property` ¶

horizontal: ZoomMathItemHorizontal

Return the ZOOm:MATH<x>:HORizontal command tree.

Usage

Using the .query() method will send the ZOOm:MATH<x>:HORizontal? query.
Using the .verify(value) method will send the ZOOm:MATH<x>:HORizontal? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.position: The ZOOm:MATH<x>:HORizontal:POSition command.
.scale: The ZOOm:MATH<x>:HORizontal:SCAle command.

vertical `property` ¶

vertical: ZoomMathItemVertical

Return the ZOOm:MATH<x>:VERTical command tree.

Usage

Using the .query() method will send the ZOOm:MATH<x>:VERTical? query.
Using the .verify(value) method will send the ZOOm:MATH<x>:VERTical? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.position: The ZOOm:MATH<x>:VERTical:POSition command.
.scale: The ZOOm:MATH<x>:VERTical:SCAle command.

ZoomMathItemHorizontal ¶

Bases: SCPICmdRead

The ZOOm:MATH<x>:HORizontal command tree.

Usage

Using the .query() method will send the ZOOm:MATH<x>:HORizontal? query.
Using the .verify(value) method will send the ZOOm:MATH<x>:HORizontal? query and raise an AssertionError if the returned value does not match value.

Properties

.position: The ZOOm:MATH<x>:HORizontal:POSition command.
.scale: The ZOOm:MATH<x>:HORizontal:SCAle command.

position `property` ¶

position: ZoomMathItemHorizontalPosition

Return the ZOOm:MATH<x>:HORizontal:POSition command.

Description

This command sets or queries the horizontal position of the specified math waveform.

Usage

Using the .query() method will send the ZOOm:MATH<x>:HORizontal:POSition? query.
Using the .verify(value) method will send the ZOOm:MATH<x>:HORizontal:POSition? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the ZOOm:MATH<x>:HORizontal:POSition value command.

SCPI Syntax

- ZOOm:MATH<x>:HORizontal:POSition <NR3>
- ZOOm:MATH<x>:HORizontal:POSition?

Info

<NR3> is a value from 0 to 100.00 and is the percent of the waveform that is to the left of screen center, when the zoom factor is 1× or greater.

scale `property` ¶

scale: ZoomMathItemHorizontalScale

Return the ZOOm:MATH<x>:HORizontal:SCAle command.

Description

This command sets or queries the zoom horizontal scale factor of the specified math waveform.

Usage

Using the .query() method will send the ZOOm:MATH<x>:HORizontal:SCAle? query.
Using the .verify(value) method will send the ZOOm:MATH<x>:HORizontal:SCAle? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the ZOOm:MATH<x>:HORizontal:SCAle value command.

SCPI Syntax

- ZOOm:MATH<x>:HORizontal:SCAle <NR3>
- ZOOm:MATH<x>:HORizontal:SCAle?

Info

<NR3> is the amount of expansion in the horizontal direction in 1-2-5 increments.

ZoomMathItemHorizontalPosition ¶

Bases: SCPICmdWrite, SCPICmdRead

The ZOOm:MATH<x>:HORizontal:POSition command.

Description

This command sets or queries the horizontal position of the specified math waveform.

Usage

Using the .query() method will send the ZOOm:MATH<x>:HORizontal:POSition? query.
Using the .verify(value) method will send the ZOOm:MATH<x>:HORizontal:POSition? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the ZOOm:MATH<x>:HORizontal:POSition value command.

SCPI Syntax

- ZOOm:MATH<x>:HORizontal:POSition <NR3>
- ZOOm:MATH<x>:HORizontal:POSition?

Info

<NR3> is a value from 0 to 100.00 and is the percent of the waveform that is to the left of screen center, when the zoom factor is 1× or greater.

ZoomMathItemHorizontalScale ¶

Bases: SCPICmdWrite, SCPICmdRead

The ZOOm:MATH<x>:HORizontal:SCAle command.

Description

This command sets or queries the zoom horizontal scale factor of the specified math waveform.

Usage

Using the .query() method will send the ZOOm:MATH<x>:HORizontal:SCAle? query.
Using the .verify(value) method will send the ZOOm:MATH<x>:HORizontal:SCAle? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the ZOOm:MATH<x>:HORizontal:SCAle value command.

SCPI Syntax

- ZOOm:MATH<x>:HORizontal:SCAle <NR3>
- ZOOm:MATH<x>:HORizontal:SCAle?

Info

<NR3> is the amount of expansion in the horizontal direction in 1-2-5 increments.

ZoomMathItemVertical ¶

Bases: SCPICmdRead

The ZOOm:MATH<x>:VERTical command tree.

Usage

Using the .query() method will send the ZOOm:MATH<x>:VERTical? query.
Using the .verify(value) method will send the ZOOm:MATH<x>:VERTical? query and raise an AssertionError if the returned value does not match value.

Properties

.position: The ZOOm:MATH<x>:VERTical:POSition command.
.scale: The ZOOm:MATH<x>:VERTical:SCAle command.

position `property` ¶

position: ZoomMathItemVerticalPosition

Return the ZOOm:MATH<x>:VERTical:POSition command.

Description

This command sets or queries the vertical position of the specified math waveform.

Usage

Using the .query() method will send the ZOOm:MATH<x>:VERTical:POSition? query.
Using the .verify(value) method will send the ZOOm:MATH<x>:VERTical:POSition? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the ZOOm:MATH<x>:VERTical:POSition value command.

SCPI Syntax

- ZOOm:MATH<x>:VERTical:POSition <NR3>
- ZOOm:MATH<x>:VERTical:POSition?

Info

<NR3> is the vertical position, expressed in divisions.

scale `property` ¶

scale: ZoomMathItemVerticalScale

Return the ZOOm:MATH<x>:VERTical:SCAle command.

Description

This command sets or queries the zoom vertical scale of the specified math waveform.

Usage

Using the .query() method will send the ZOOm:MATH<x>:VERTical:SCAle? query.
Using the .verify(value) method will send the ZOOm:MATH<x>:VERTical:SCAle? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the ZOOm:MATH<x>:VERTical:SCAle value command.

SCPI Syntax

- ZOOm:MATH<x>:VERTical:SCAle <NR3>
- ZOOm:MATH<x>:VERTical:SCAle?

Info

<NR3> sets the horizontal scale factor of the specified Math 1 waveform to 10.

ZoomMathItemVerticalPosition ¶

Bases: SCPICmdWrite, SCPICmdRead

The ZOOm:MATH<x>:VERTical:POSition command.

Description

This command sets or queries the vertical position of the specified math waveform.

Usage

Using the .query() method will send the ZOOm:MATH<x>:VERTical:POSition? query.
Using the .verify(value) method will send the ZOOm:MATH<x>:VERTical:POSition? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the ZOOm:MATH<x>:VERTical:POSition value command.

SCPI Syntax

- ZOOm:MATH<x>:VERTical:POSition <NR3>
- ZOOm:MATH<x>:VERTical:POSition?

Info

<NR3> is the vertical position, expressed in divisions.

ZoomMathItemVerticalScale ¶

Bases: SCPICmdWrite, SCPICmdRead

The ZOOm:MATH<x>:VERTical:SCAle command.

Description

This command sets or queries the zoom vertical scale of the specified math waveform.

Usage

Using the .query() method will send the ZOOm:MATH<x>:VERTical:SCAle? query.
Using the .verify(value) method will send the ZOOm:MATH<x>:VERTical:SCAle? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the ZOOm:MATH<x>:VERTical:SCAle value command.

SCPI Syntax

- ZOOm:MATH<x>:VERTical:SCAle <NR3>
- ZOOm:MATH<x>:VERTical:SCAle?

Info

<NR3> sets the horizontal scale factor of the specified Math 1 waveform to 10.

ZoomMode ¶

Bases: SCPICmdWrite

The ZOOm:MODe command.

Description

This command turns Zoom mode on or off. The Zoom query returns the current state of Zoom mode. This command is equivalent to pressing the ZOOM button located on the front panel.

Usage

Using the .write(value) method will send the ZOOm:MODe value command.

SCPI Syntax

- ZOOm:MODe {ON|OFF|<NR1>}

Info

ON turns on Zoom mode.
OFF turns off Zoom mode.
<NR1> = 0 turns off Zoom mode; any other value turns on Zoom mode.

ZoomRefItem ¶

Bases: ValidatedDynamicNumberCmd, SCPICmdRead

The ZOOm:REF<x> command tree.

Usage

Using the .query() method will send the ZOOm:REF<x>? query.
Using the .verify(value) method will send the ZOOm:REF<x>? query and raise an AssertionError if the returned value does not match value.

Properties

.horizontal: The ZOOm:REF<x>:HORizontal command tree.
.vertical: The ZOOm:REF<x>:VERTical command tree.

horizontal `property` ¶

horizontal: ZoomRefItemHorizontal

Return the ZOOm:REF<x>:HORizontal command tree.

Usage

Using the .query() method will send the ZOOm:REF<x>:HORizontal? query.
Using the .verify(value) method will send the ZOOm:REF<x>:HORizontal? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.position: The ZOOm:REF<x>:HORizontal:POSition command.
.scale: The ZOOm:REF<x>:HORizontal:SCAle command.

vertical `property` ¶

vertical: ZoomRefItemVertical

Return the ZOOm:REF<x>:VERTical command tree.

Usage

Using the .query() method will send the ZOOm:REF<x>:VERTical? query.
Using the .verify(value) method will send the ZOOm:REF<x>:VERTical? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.position: The ZOOm:REF<x>:VERTical:POSition command.
.scale: The ZOOm:REF<x>:VERTical:SCAle command.

ZoomRefItemHorizontal ¶

Bases: SCPICmdRead

The ZOOm:REF<x>:HORizontal command tree.

Usage

Using the .query() method will send the ZOOm:REF<x>:HORizontal? query.
Using the .verify(value) method will send the ZOOm:REF<x>:HORizontal? query and raise an AssertionError if the returned value does not match value.

Properties

.position: The ZOOm:REF<x>:HORizontal:POSition command.
.scale: The ZOOm:REF<x>:HORizontal:SCAle command.

position `property` ¶

position: ZoomRefItemHorizontalPosition

Return the ZOOm:REF<x>:HORizontal:POSition command.

Description

This command sets or queries the horizontal position of the specified reference waveform.

Usage

Using the .query() method will send the ZOOm:REF<x>:HORizontal:POSition? query.
Using the .verify(value) method will send the ZOOm:REF<x>:HORizontal:POSition? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the ZOOm:REF<x>:HORizontal:POSition value command.

SCPI Syntax

- ZOOm:REF<x>:HORizontal:POSition <NR3>
- ZOOm:REF<x>:HORizontal:POSition?

Info

<NR3> is a value from 0 to 100.00 and is the percent of the waveform that is to the left of screen center, when the zoom factor is 1× or greater.

scale `property` ¶

scale: ZoomRefItemHorizontalScale

Return the ZOOm:REF<x>:HORizontal:SCAle command.

Description

This command sets or queries the zoom horizontal scale factor of the specified reference waveform.

Usage

Using the .query() method will send the ZOOm:REF<x>:HORizontal:SCAle? query.
Using the .verify(value) method will send the ZOOm:REF<x>:HORizontal:SCAle? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the ZOOm:REF<x>:HORizontal:SCAle value command.

SCPI Syntax

- ZOOm:REF<x>:HORizontal:SCAle <NR3>
- ZOOm:REF<x>:HORizontal:SCAle?

Info

<NR3> is the amount of expansion in the horizontal direction in 1-2-5 increments.

ZoomRefItemHorizontalPosition ¶

Bases: SCPICmdWrite, SCPICmdRead

The ZOOm:REF<x>:HORizontal:POSition command.

Description

This command sets or queries the horizontal position of the specified reference waveform.

Usage

Using the .query() method will send the ZOOm:REF<x>:HORizontal:POSition? query.
Using the .verify(value) method will send the ZOOm:REF<x>:HORizontal:POSition? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the ZOOm:REF<x>:HORizontal:POSition value command.

SCPI Syntax

- ZOOm:REF<x>:HORizontal:POSition <NR3>
- ZOOm:REF<x>:HORizontal:POSition?

Info

<NR3> is a value from 0 to 100.00 and is the percent of the waveform that is to the left of screen center, when the zoom factor is 1× or greater.

ZoomRefItemHorizontalScale ¶

Bases: SCPICmdWrite, SCPICmdRead

The ZOOm:REF<x>:HORizontal:SCAle command.

Description

This command sets or queries the zoom horizontal scale factor of the specified reference waveform.

Usage

Using the .query() method will send the ZOOm:REF<x>:HORizontal:SCAle? query.
Using the .verify(value) method will send the ZOOm:REF<x>:HORizontal:SCAle? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the ZOOm:REF<x>:HORizontal:SCAle value command.

SCPI Syntax

- ZOOm:REF<x>:HORizontal:SCAle <NR3>
- ZOOm:REF<x>:HORizontal:SCAle?

Info

<NR3> is the amount of expansion in the horizontal direction in 1-2-5 increments.

ZoomRefItemVertical ¶

Bases: SCPICmdRead

The ZOOm:REF<x>:VERTical command tree.

Usage

Using the .query() method will send the ZOOm:REF<x>:VERTical? query.
Using the .verify(value) method will send the ZOOm:REF<x>:VERTical? query and raise an AssertionError if the returned value does not match value.

Properties

.position: The ZOOm:REF<x>:VERTical:POSition command.
.scale: The ZOOm:REF<x>:VERTical:SCAle command.

position `property` ¶

position: ZoomRefItemVerticalPosition

Return the ZOOm:REF<x>:VERTical:POSition command.

Description

This command sets or queries the vertical position of the specified reference waveform.

Usage

Using the .query() method will send the ZOOm:REF<x>:VERTical:POSition? query.
Using the .verify(value) method will send the ZOOm:REF<x>:VERTical:POSition? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the ZOOm:REF<x>:VERTical:POSition value command.

SCPI Syntax

- ZOOm:REF<x>:VERTical:POSition <NR3>
- ZOOm:REF<x>:VERTical:POSition?

Info

<NR3> is the vertical position, expressed in divisions.

scale `property` ¶

scale: ZoomRefItemVerticalScale

Return the ZOOm:REF<x>:VERTical:SCAle command.

Description

This command sets or queries the zoom vertical scale of the specified reference waveform.

Usage

Using the .query() method will send the ZOOm:REF<x>:VERTical:SCAle? query.
Using the .verify(value) method will send the ZOOm:REF<x>:VERTical:SCAle? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the ZOOm:REF<x>:VERTical:SCAle value command.

SCPI Syntax

- ZOOm:REF<x>:VERTical:SCAle <NR3>
- ZOOm:REF<x>:VERTical:SCAle?

Info

<NR3> sets the horizontal scale factor of the specified Reference 1 waveform to 10.

ZoomRefItemVerticalPosition ¶

Bases: SCPICmdWrite, SCPICmdRead

The ZOOm:REF<x>:VERTical:POSition command.

Description

This command sets or queries the vertical position of the specified reference waveform.

Usage

Using the .query() method will send the ZOOm:REF<x>:VERTical:POSition? query.
Using the .verify(value) method will send the ZOOm:REF<x>:VERTical:POSition? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the ZOOm:REF<x>:VERTical:POSition value command.

SCPI Syntax

- ZOOm:REF<x>:VERTical:POSition <NR3>
- ZOOm:REF<x>:VERTical:POSition?

Info

<NR3> is the vertical position, expressed in divisions.

ZoomRefItemVerticalScale ¶

Bases: SCPICmdWrite, SCPICmdRead

The ZOOm:REF<x>:VERTical:SCAle command.

Description

This command sets or queries the zoom vertical scale of the specified reference waveform.

Usage

Using the .query() method will send the ZOOm:REF<x>:VERTical:SCAle? query.
Using the .verify(value) method will send the ZOOm:REF<x>:VERTical:SCAle? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the ZOOm:REF<x>:VERTical:SCAle value command.

SCPI Syntax

- ZOOm:REF<x>:VERTical:SCAle <NR3>
- ZOOm:REF<x>:VERTical:SCAle?

Info

<NR3> sets the horizontal scale factor of the specified Reference 1 waveform to 10.

ZoomScroll ¶

Bases: SCPICmdRead

The ZOOm:SCROLL command tree.

Usage

Using the .query() method will send the ZOOm:SCROLL? query.
Using the .verify(value) method will send the ZOOm:SCROLL? query and raise an AssertionError if the returned value does not match value.

Properties

.direction: The ZOOm:SCROLL:DIREction command.
.lock: The ZOOm:SCROLL:LOCk command.
.speed: The ZOOm:SCROLL:SPEED command.

direction `property` ¶

direction: ZoomScrollDirection

Return the ZOOm:SCROLL:DIREction command.

Description

This command sets or queries the direction for automatic scrolling of zoomed waveforms.

Usage

Using the .query() method will send the ZOOm:SCROLL:DIREction? query.
Using the .verify(value) method will send the ZOOm:SCROLL:DIREction? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the ZOOm:SCROLL:DIREction value command.

SCPI Syntax

- ZOOm:SCROLL:DIREction {FWD|FFWD|REV|FREV|STOP}
- ZOOm:SCROLL:DIREction?

Info

FWD starts AutoScroll. The Zoom Box moves from left to right.
FFWD starts AutoScroll. Increases the scrolling speed in the forward direction.
REV starts AutoScroll. The Zoom Box moves from right to left.
FREV starts AutoScroll. Increases the scrolling speed in the reverse direction.
STOP halts AutoScroll.

lock `property` ¶

lock: ZoomScrollLock

Return the ZOOm:SCROLL:LOCk command.

Description

This command sets or queries the state of Scroll Lock, which ‘locks’ zoomed waveforms under common control.

Usage

Using the .query() method will send the ZOOm:SCROLL:LOCk? query.
Using the .verify(value) method will send the ZOOm:SCROLL:LOCk? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the ZOOm:SCROLL:LOCk value command.

SCPI Syntax

- ZOOm:SCROLL:LOCk {ON|OFF|<NR1>}
- ZOOm:SCROLL:LOCk?

Info

ON enables Scroll Lock.
OFF disables Scroll Lock.
<NR1> = 0 disables Scroll Lock for all zoom windows; any other value enables Scroll Lock for all zoom windows.

speed `property` ¶

speed: ZoomScrollSpeed

Return the ZOOm:SCROLL:SPEED command.

Description

This command sets or queries the speed of automatic scrolling.

Usage

Using the .query() method will send the ZOOm:SCROLL:SPEED? query.
Using the .verify(value) method will send the ZOOm:SCROLL:SPEED? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the ZOOm:SCROLL:SPEED value command.

SCPI Syntax

- ZOOm:SCROLL:SPEED <NR1>
- ZOOm:SCROLL:SPEED?

Info

<NR1> is a value from 1 to 10.

ZoomScrollDirection ¶

Bases: SCPICmdWrite, SCPICmdRead

The ZOOm:SCROLL:DIREction command.

Description

This command sets or queries the direction for automatic scrolling of zoomed waveforms.

Usage

Using the .query() method will send the ZOOm:SCROLL:DIREction? query.
Using the .verify(value) method will send the ZOOm:SCROLL:DIREction? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the ZOOm:SCROLL:DIREction value command.

SCPI Syntax

- ZOOm:SCROLL:DIREction {FWD|FFWD|REV|FREV|STOP}
- ZOOm:SCROLL:DIREction?

Info

FWD starts AutoScroll. The Zoom Box moves from left to right.
FFWD starts AutoScroll. Increases the scrolling speed in the forward direction.
REV starts AutoScroll. The Zoom Box moves from right to left.
FREV starts AutoScroll. Increases the scrolling speed in the reverse direction.
STOP halts AutoScroll.

ZoomScrollLock ¶

Bases: SCPICmdWrite, SCPICmdRead

The ZOOm:SCROLL:LOCk command.

Description

This command sets or queries the state of Scroll Lock, which ‘locks’ zoomed waveforms under common control.

Usage

Using the .query() method will send the ZOOm:SCROLL:LOCk? query.
Using the .verify(value) method will send the ZOOm:SCROLL:LOCk? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the ZOOm:SCROLL:LOCk value command.

SCPI Syntax

- ZOOm:SCROLL:LOCk {ON|OFF|<NR1>}
- ZOOm:SCROLL:LOCk?

Info

ON enables Scroll Lock.
OFF disables Scroll Lock.
<NR1> = 0 disables Scroll Lock for all zoom windows; any other value enables Scroll Lock for all zoom windows.

ZoomScrollSpeed ¶

Bases: SCPICmdWrite, SCPICmdRead

The ZOOm:SCROLL:SPEED command.

Description

This command sets or queries the speed of automatic scrolling.

Usage

Using the .query() method will send the ZOOm:SCROLL:SPEED? query.
Using the .verify(value) method will send the ZOOm:SCROLL:SPEED? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the ZOOm:SCROLL:SPEED value command.

SCPI Syntax

- ZOOm:SCROLL:SPEED <NR1>
- ZOOm:SCROLL:SPEED?

Info

<NR1> is a value from 1 to 10.

ZoomState ¶

Bases: SCPICmdWrite, SCPICmdRead

The ZOOm:STATE command.

Description

This command sets or queries the specified zoom on or off.

Usage

Using the .query() method will send the ZOOm:STATE? query.
Using the .verify(value) method will send the ZOOm:STATE? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the ZOOm:STATE value command.

SCPI Syntax

- ZOOm:STATE {ON|OFF|<NR1>}
- ZOOm:STATE?

Info

ON turns zoom on or off.
OFF turns zoom on or off.
<NR1> = 0 disables the zoom; any other value enables the zoom.

ZoomVertical ¶

Bases: SCPICmdRead

The ZOOm:VERTical command tree.

Usage

Using the .query() method will send the ZOOm:VERTical? query.
Using the .verify(value) method will send the ZOOm:VERTical? query and raise an AssertionError if the returned value does not match value.

Properties

.position: The ZOOm:VERTical:POSition command.
.scale: The ZOOm:VERTical:SCAle command.

position `property` ¶

position: ZoomVerticalPosition

Return the ZOOm:VERTical:POSition command.

Description

This command sets or queries the vertical position around which the zoom waveform is displayed. It is freely movable within the confines of the acquired waveform (0% to 100%) and measured from left to right of the acquired waveform.

Usage

Using the .query() method will send the ZOOm:VERTical:POSition? query.
Using the .verify(value) method will send the ZOOm:VERTical:POSition? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the ZOOm:VERTical:POSition value command.

SCPI Syntax

- ZOOm:VERTical:POSition <NR3>
- ZOOm:VERTical:POSition?

Info

NR3 is a value from 0 to 100.00 and is the percent of the waveform that is to the left of screen center, when the zoom factor is 1× or greater.

scale `property` ¶

scale: ZoomVerticalScale

Return the ZOOm:VERTical:SCAle command.

Description

This command sets or queries the zoom vertical scale factor around which the zoom waveform is displayed.

Usage

Using the .query() method will send the ZOOm:VERTical:SCAle? query.
Using the .verify(value) method will send the ZOOm:VERTical:SCAle? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the ZOOm:VERTical:SCAle value command.

SCPI Syntax

- ZOOm:VERTical:SCAle <NR3>
- ZOOm:VERTical:SCAle?

Info

<NR3> is the amount of expansion in the vertical direction in 1-2-5 increments.

ZoomVerticalPosition ¶

Bases: SCPICmdWrite, SCPICmdRead

The ZOOm:VERTical:POSition command.

Description

This command sets or queries the vertical position around which the zoom waveform is displayed. It is freely movable within the confines of the acquired waveform (0% to 100%) and measured from left to right of the acquired waveform.

Usage

Using the .query() method will send the ZOOm:VERTical:POSition? query.
Using the .verify(value) method will send the ZOOm:VERTical:POSition? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the ZOOm:VERTical:POSition value command.

SCPI Syntax

- ZOOm:VERTical:POSition <NR3>
- ZOOm:VERTical:POSition?

Info

NR3 is a value from 0 to 100.00 and is the percent of the waveform that is to the left of screen center, when the zoom factor is 1× or greater.

ZoomVerticalScale ¶

Bases: SCPICmdWrite, SCPICmdRead

The ZOOm:VERTical:SCAle command.

Description

This command sets or queries the zoom vertical scale factor around which the zoom waveform is displayed.

Usage

Using the .query() method will send the ZOOm:VERTical:SCAle? query.
Using the .verify(value) method will send the ZOOm:VERTical:SCAle? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the ZOOm:VERTical:SCAle value command.

SCPI Syntax

- ZOOm:VERTical:SCAle <NR3>
- ZOOm:VERTical:SCAle?

Info

<NR3> is the amount of expansion in the vertical direction in 1-2-5 increments.

ZoomZoom1 ¶

Bases: SCPICmdWrite, SCPICmdRead

The ZOOm:ZOOM1 command.

Description

This command resets the zoom transforms to default values for all traces of the specified zoom, where x is an integer from 1 to 4 representing the desired zoom window. The ZOOM:REFX:VERTICAL:SCALE? query returns the current vertical and horizontal positioning and scaling of the display.

Usage

Using the .query() method will send the ZOOm:ZOOM1? query.
Using the .verify(value) method will send the ZOOm:ZOOM1? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the ZOOm:ZOOM1 value command.

SCPI Syntax

- ZOOm:ZOOM1 {RESET|RESETLive}
- ZOOm:ZOOM1?

Info

RESET resets the zoom transforms to default values for all traces of the specified zoom.
RESETLive resets the zoom transforms to default values for live traces of the specified zoom.

Properties

.dchan: The ZOOm:ZOOM1:DCHAN command tree.
.scrolllock: The ZOOm:ZOOM1:SCROLLLock command.
.state: The ZOOm:ZOOM1:STATE command.
.ch: The ZOOm:ZOOM1:CH<x> command tree.
.math: The ZOOm:ZOOM1:MATH<x> command tree.
.ref: The ZOOm:ZOOM1:REF<x> command tree.
.d: The ZOOm:ZOOM1:D<x> command tree.

ch `property` ¶

ch: dict[int, ZoomZoom1Channel]

Return the ZOOm:ZOOM1:CH<x> command tree.

Usage

Using the .query() method will send the ZOOm:ZOOM1:CH<x>? query.
Using the .verify(value) method will send the ZOOm:ZOOM1:CH<x>? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.display: The ZOOm:ZOOM1:CH<x>:DISplay command.
.horizontal: The ZOOm:ZOOM1:CH<x>:HORizontal command tree.
.vertical: The ZOOm:ZOOM1:CH<x>:VERTical command tree.

d `property` ¶

d: dict[int, ZoomZoom1DigitalBit]

Return the ZOOm:ZOOM1:D<x> command tree.

Usage

Using the .query() method will send the ZOOm:ZOOM1:D<x>? query.
Using the .verify(value) method will send the ZOOm:ZOOM1:D<x>? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.display: The ZOOm:ZOOM1:D<x>:DISplay command.
.horizontal: The ZOOm:ZOOM1:D<x>:HORizontal command tree.
.vertical: The ZOOm:ZOOM1:D<x>:VERTical command tree.

dchan `property` ¶

dchan: ZoomZoom1Dchan

Return the ZOOm:ZOOM1:DCHAN command tree.

Usage

Using the .query() method will send the ZOOm:ZOOM1:DCHAN? query.
Using the .verify(value) method will send the ZOOm:ZOOM1:DCHAN? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.display: The ZOOm:ZOOM1:DCHAN:DISplay command.

math `property` ¶

math: dict[int, ZoomZoom1MathItem]

Return the ZOOm:ZOOM1:MATH<x> command tree.

Usage

Using the .query() method will send the ZOOm:ZOOM1:MATH<x>? query.
Using the .verify(value) method will send the ZOOm:ZOOM1:MATH<x>? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.display: The ZOOm:ZOOM1:MATH<x>:DISplay command.
.horizontal: The ZOOm:ZOOM1:MATH<x>:HORizontal command tree.
.vertical: The ZOOm:ZOOM1:MATH<x>:VERTical command tree.

ref `property` ¶

ref: dict[int, ZoomZoom1RefItem]

Return the ZOOm:ZOOM1:REF<x> command tree.

Usage

Using the .query() method will send the ZOOm:ZOOM1:REF<x>? query.
Using the .verify(value) method will send the ZOOm:ZOOM1:REF<x>? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.display: The ZOOm:ZOOM1:REF<x>:DISplay command.
.horizontal: The ZOOm:ZOOM1:REF<x>:HORizontal command tree.
.vertical: The ZOOm:ZOOM1:REF<x>:VERTical command tree.

scrolllock `property` ¶

scrolllock: ZoomZoom1Scrolllock

Return the ZOOm:ZOOM1:SCROLLLock command.

Description

This command sets or queries Scroll Lock for the specified zoom, where x is an integer from 1 to 4 representing the desired zoom window.

Usage

Using the .query() method will send the ZOOm:ZOOM1:SCROLLLock? query.
Using the .verify(value) method will send the ZOOm:ZOOM1:SCROLLLock? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the ZOOm:ZOOM1:SCROLLLock value command.

SCPI Syntax

- ZOOm:ZOOM1:SCROLLLock {ON|OFF|<NR1>}
- ZOOm:ZOOM1:SCROLLLock?

Info

ON locks waveforms for the specified zoom window .
OFF unlocks waveforms for the specified zoom window .
<NR1> = 0 unlocks waveforms for the specified zoom window ; any other value locks waveforms for the specified zoom window .

state `property` ¶

state: ZoomZoom1State

Return the ZOOm:ZOOM1:STATE command.

Description

This command turns the specified zoom on or off. can only be 1.

Usage

Using the .query() method will send the ZOOm:ZOOM1:STATE? query.
Using the .verify(value) method will send the ZOOm:ZOOM1:STATE? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the ZOOm:ZOOM1:STATE value command.

SCPI Syntax

- ZOOm:ZOOM1:STATE {ON|OFF|<NR1>}
- ZOOm:ZOOM1:STATE?

Info

ON turns Zoom 1 on.
OFF turns Zoom 1 off.
<NR1> is an integer. 0 disables the specified zoom; any other value enables the specified zoom.

ZoomZoom1Channel ¶

Bases: ValidatedChannel, SCPICmdRead

The ZOOm:ZOOM1:CH<x> command tree.

Usage

Using the .query() method will send the ZOOm:ZOOM1:CH<x>? query.
Using the .verify(value) method will send the ZOOm:ZOOM1:CH<x>? query and raise an AssertionError if the returned value does not match value.

Properties

.display: The ZOOm:ZOOM1:CH<x>:DISplay command.
.horizontal: The ZOOm:ZOOM1:CH<x>:HORizontal command tree.
.vertical: The ZOOm:ZOOM1:CH<x>:VERTical command tree.

display `property` ¶

display: ZoomZoom1ChannelDisplay

Return the ZOOm:ZOOM1:CH<x>:DISplay command.

Description

This command sets or queries the display of the specified waveform for the specified zoom, where x is an integer from 1 to 4 representing the desired zoom window. The waveform affected is determine by which can vary from CH1, CH2, CH3, CH4, Math1, Math2, Math3, Math4, Ref1, Ref2, Ref3, or Ref4.

Usage

Using the .query() method will send the ZOOm:ZOOM1:CH<x>:DISplay? query.
Using the .verify(value) method will send the ZOOm:ZOOM1:CH<x>:DISplay? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the ZOOm:ZOOM1:CH<x>:DISplay value command.

SCPI Syntax

- ZOOm:ZOOM1:CH<x>:DISplay {ON|OFF|<NR1>}
- ZOOm:ZOOM1:CH<x>:DISplay?

Info

<NR1> A zero disables the specified zoom; any other value enables the specified zoom.
OFF disables the specified zoom.
ON displays the specified zoom.

horizontal `property` ¶

horizontal: ZoomZoom1ChannelHorizontal

Return the ZOOm:ZOOM1:CH<x>:HORizontal command tree.

Usage

Using the .query() method will send the ZOOm:ZOOM1:CH<x>:HORizontal? query.
Using the .verify(value) method will send the ZOOm:ZOOM1:CH<x>:HORizontal? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.position: The ZOOm:ZOOM1:CH<x>:HORizontal:POSition command.
.scale: The ZOOm:ZOOM1:CH<x>:HORizontal:SCAle command.

vertical `property` ¶

vertical: ZoomZoom1ChannelVertical

Return the ZOOm:ZOOM1:CH<x>:VERTical command tree.

Usage

Using the .query() method will send the ZOOm:ZOOM1:CH<x>:VERTical? query.
Using the .verify(value) method will send the ZOOm:ZOOM1:CH<x>:VERTical? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.position: The ZOOm:ZOOM1:CH<x>:VERTical:POSition command.
.scale: The ZOOm:ZOOM1:CH<x>:VERTical:SCAle command.

ZoomZoom1ChannelDisplay ¶

Bases: SCPICmdWrite, SCPICmdRead

The ZOOm:ZOOM1:CH<x>:DISplay command.

Description

This command sets or queries the display of the specified waveform for the specified zoom, where x is an integer from 1 to 4 representing the desired zoom window. The waveform affected is determine by which can vary from CH1, CH2, CH3, CH4, Math1, Math2, Math3, Math4, Ref1, Ref2, Ref3, or Ref4.

Usage

Using the .query() method will send the ZOOm:ZOOM1:CH<x>:DISplay? query.
Using the .verify(value) method will send the ZOOm:ZOOM1:CH<x>:DISplay? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the ZOOm:ZOOM1:CH<x>:DISplay value command.

SCPI Syntax

- ZOOm:ZOOM1:CH<x>:DISplay {ON|OFF|<NR1>}
- ZOOm:ZOOM1:CH<x>:DISplay?

Info

<NR1> A zero disables the specified zoom; any other value enables the specified zoom.
OFF disables the specified zoom.
ON displays the specified zoom.

ZoomZoom1ChannelHorizontal ¶

Bases: SCPICmdRead

The ZOOm:ZOOM1:CH<x>:HORizontal command tree.

Usage

Using the .query() method will send the ZOOm:ZOOM1:CH<x>:HORizontal? query.
Using the .verify(value) method will send the ZOOm:ZOOM1:CH<x>:HORizontal? query and raise an AssertionError if the returned value does not match value.

Properties

.position: The ZOOm:ZOOM1:CH<x>:HORizontal:POSition command.
.scale: The ZOOm:ZOOM1:CH<x>:HORizontal:SCAle command.

position `property` ¶

position: ZoomZoom1ChannelHorizontalPosition

Return the ZOOm:ZOOM1:CH<x>:HORizontal:POSition command.

Description

This command sets or queries the horizontal position of the specified waveform for the specified zoom, where x is an integer from 1 to 4 representing the desired zoom window. The setting of the ZOOM:ZOOMX:SCROLLLOCK command determines the waveforms that are affected. The waveform affected is determine by which can vary from CH1, CH2, CH3, CH4, Math1, Math2, Math3, Math4, Ref1, Ref2, Ref3, or Ref4.

Usage

Using the .query() method will send the ZOOm:ZOOM1:CH<x>:HORizontal:POSition? query.
Using the .verify(value) method will send the ZOOm:ZOOM1:CH<x>:HORizontal:POSition? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the ZOOm:ZOOM1:CH<x>:HORizontal:POSition value command.

SCPI Syntax

- ZOOm:ZOOM1:CH<x>:HORizontal:POSition <NR3>
- ZOOm:ZOOM1:CH<x>:HORizontal:POSition?

Info

<NR3> is a value from 0 to 100.00 and is the percent of the waveform that is to the left of screen center, when the zoom factor is 1× or greater.

scale `property` ¶

scale: ZoomZoom1ChannelHorizontalScale

Return the ZOOm:ZOOM1:CH<x>:HORizontal:SCAle command.

Description

This command sets or queries the zoom horizontal scale factor of the specified waveform for the specified zoom, where x is an integer from 1 to 4 representing the desired zoom window. The waveform affected is determine by which can vary from CH1, CH2, CH3, CH4, Math1, Math2, Math3, Math4, Ref1, Ref2, Ref3, or Ref4.

Usage

Using the .query() method will send the ZOOm:ZOOM1:CH<x>:HORizontal:SCAle? query.
Using the .verify(value) method will send the ZOOm:ZOOM1:CH<x>:HORizontal:SCAle? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the ZOOm:ZOOM1:CH<x>:HORizontal:SCAle value command.

SCPI Syntax

- ZOOm:ZOOM1:CH<x>:HORizontal:SCAle <NR3>
- ZOOm:ZOOM1:CH<x>:HORizontal:SCAle?

Info

<NR3> is the amount of expansion in the horizontal direction in 1-2-5 increments.

ZoomZoom1ChannelHorizontalPosition ¶

Bases: SCPICmdWrite, SCPICmdRead

The ZOOm:ZOOM1:CH<x>:HORizontal:POSition command.

Description

This command sets or queries the horizontal position of the specified waveform for the specified zoom, where x is an integer from 1 to 4 representing the desired zoom window. The setting of the ZOOM:ZOOMX:SCROLLLOCK command determines the waveforms that are affected. The waveform affected is determine by which can vary from CH1, CH2, CH3, CH4, Math1, Math2, Math3, Math4, Ref1, Ref2, Ref3, or Ref4.

Usage

Using the .query() method will send the ZOOm:ZOOM1:CH<x>:HORizontal:POSition? query.
Using the .verify(value) method will send the ZOOm:ZOOM1:CH<x>:HORizontal:POSition? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the ZOOm:ZOOM1:CH<x>:HORizontal:POSition value command.

SCPI Syntax

- ZOOm:ZOOM1:CH<x>:HORizontal:POSition <NR3>
- ZOOm:ZOOM1:CH<x>:HORizontal:POSition?

Info

<NR3> is a value from 0 to 100.00 and is the percent of the waveform that is to the left of screen center, when the zoom factor is 1× or greater.

ZoomZoom1ChannelHorizontalScale ¶

Bases: SCPICmdWrite, SCPICmdRead

The ZOOm:ZOOM1:CH<x>:HORizontal:SCAle command.

Description

This command sets or queries the zoom horizontal scale factor of the specified waveform for the specified zoom, where x is an integer from 1 to 4 representing the desired zoom window. The waveform affected is determine by which can vary from CH1, CH2, CH3, CH4, Math1, Math2, Math3, Math4, Ref1, Ref2, Ref3, or Ref4.

Usage

Using the .query() method will send the ZOOm:ZOOM1:CH<x>:HORizontal:SCAle? query.
Using the .verify(value) method will send the ZOOm:ZOOM1:CH<x>:HORizontal:SCAle? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the ZOOm:ZOOM1:CH<x>:HORizontal:SCAle value command.

SCPI Syntax

- ZOOm:ZOOM1:CH<x>:HORizontal:SCAle <NR3>
- ZOOm:ZOOM1:CH<x>:HORizontal:SCAle?

Info

<NR3> is the amount of expansion in the horizontal direction in 1-2-5 increments.

ZoomZoom1ChannelVertical ¶

Bases: SCPICmdRead

The ZOOm:ZOOM1:CH<x>:VERTical command tree.

Usage

Using the .query() method will send the ZOOm:ZOOM1:CH<x>:VERTical? query.
Using the .verify(value) method will send the ZOOm:ZOOM1:CH<x>:VERTical? query and raise an AssertionError if the returned value does not match value.

Properties

.position: The ZOOm:ZOOM1:CH<x>:VERTical:POSition command.
.scale: The ZOOm:ZOOM1:CH<x>:VERTical:SCAle command.

position `property` ¶

position: ZoomZoom1ChannelVerticalPosition

Return the ZOOm:ZOOM1:CH<x>:VERTical:POSition command.

Description

This command sets or queries the vertical position of the specified waveform for the specified zoom, where x is an integer from 1 to 4 representing the desired zoom window. The setting of the ZOOm:1:SCROLLLOCk command determines the waveforms that are affected. The can be a channel, math, or reference waveform. The waveform affected is determine by which can vary from CH1, CH2, CH3, CH4, Math1, Math2, Math3, Math4, Ref1, Ref2, Ref3, or Ref4.

Usage

Using the .query() method will send the ZOOm:ZOOM1:CH<x>:VERTical:POSition? query.
Using the .verify(value) method will send the ZOOm:ZOOM1:CH<x>:VERTical:POSition? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the ZOOm:ZOOM1:CH<x>:VERTical:POSition value command.

SCPI Syntax

- ZOOm:ZOOM1:CH<x>:VERTical:POSition <NR3>
- ZOOm:ZOOM1:CH<x>:VERTical:POSition?

Info

<NR3> is the vertical position, expressed in divisions.

scale `property` ¶

scale: ZoomZoom1ChannelVerticalScale

Return the ZOOm:ZOOM1:CH<x>:VERTical:SCAle command.

Description

This command sets or queries the zoom vertical scale of the specified waveform for the specified zoom, where x is an integer from 1 to 4 representing the desired zoom window. The waveform affected is determine by which can vary from CH1, CH2, CH3, CH4, Math1, Math2, Math3, Math4, Ref1, Ref2, Ref3, or Ref4.

Usage

Using the .query() method will send the ZOOm:ZOOM1:CH<x>:VERTical:SCAle? query.
Using the .verify(value) method will send the ZOOm:ZOOM1:CH<x>:VERTical:SCAle? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the ZOOm:ZOOM1:CH<x>:VERTical:SCAle value command.

SCPI Syntax

- ZOOm:ZOOM1:CH<x>:VERTical:SCAle <NR3>
- ZOOm:ZOOM1:CH<x>:VERTical:SCAle?

Info

<NR3> is the amount of vertical expansion or compression, which operates on a 1-2-5 sequence (for example, 1, 2, 5, 10, 20, 50, 100…). Based on the value that you entered, this command uses the nearest scale factor. Setting the vertical scale to 1 indicates unity (no zoom).

ZoomZoom1ChannelVerticalPosition ¶

Bases: SCPICmdWrite, SCPICmdRead

The ZOOm:ZOOM1:CH<x>:VERTical:POSition command.

Description

This command sets or queries the vertical position of the specified waveform for the specified zoom, where x is an integer from 1 to 4 representing the desired zoom window. The setting of the ZOOm:1:SCROLLLOCk command determines the waveforms that are affected. The can be a channel, math, or reference waveform. The waveform affected is determine by which can vary from CH1, CH2, CH3, CH4, Math1, Math2, Math3, Math4, Ref1, Ref2, Ref3, or Ref4.

Usage

Using the .query() method will send the ZOOm:ZOOM1:CH<x>:VERTical:POSition? query.
Using the .verify(value) method will send the ZOOm:ZOOM1:CH<x>:VERTical:POSition? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the ZOOm:ZOOM1:CH<x>:VERTical:POSition value command.

SCPI Syntax

- ZOOm:ZOOM1:CH<x>:VERTical:POSition <NR3>
- ZOOm:ZOOM1:CH<x>:VERTical:POSition?

Info

<NR3> is the vertical position, expressed in divisions.

ZoomZoom1ChannelVerticalScale ¶

Bases: SCPICmdWrite, SCPICmdRead

The ZOOm:ZOOM1:CH<x>:VERTical:SCAle command.

Description

This command sets or queries the zoom vertical scale of the specified waveform for the specified zoom, where x is an integer from 1 to 4 representing the desired zoom window. The waveform affected is determine by which can vary from CH1, CH2, CH3, CH4, Math1, Math2, Math3, Math4, Ref1, Ref2, Ref3, or Ref4.

Usage

Using the .query() method will send the ZOOm:ZOOM1:CH<x>:VERTical:SCAle? query.
Using the .verify(value) method will send the ZOOm:ZOOM1:CH<x>:VERTical:SCAle? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the ZOOm:ZOOM1:CH<x>:VERTical:SCAle value command.

SCPI Syntax

- ZOOm:ZOOM1:CH<x>:VERTical:SCAle <NR3>
- ZOOm:ZOOM1:CH<x>:VERTical:SCAle?

Info

<NR3> is the amount of vertical expansion or compression, which operates on a 1-2-5 sequence (for example, 1, 2, 5, 10, 20, 50, 100…). Based on the value that you entered, this command uses the nearest scale factor. Setting the vertical scale to 1 indicates unity (no zoom).

ZoomZoom1Dchan ¶

Bases: SCPICmdRead

The ZOOm:ZOOM1:DCHAN command tree.

Usage

Using the .query() method will send the ZOOm:ZOOM1:DCHAN? query.
Using the .verify(value) method will send the ZOOm:ZOOM1:DCHAN? query and raise an AssertionError if the returned value does not match value.

Properties

.display: The ZOOm:ZOOM1:DCHAN:DISplay command.

display `property` ¶

display: ZoomZoom1DchanDisplay

Return the ZOOm:ZOOM1:DCHAN:DISplay command.

Description

This command sets or queries the display of the digital waveforms for the specified zoom, where x is an integer from 1 to 4 representing the desired zoom window. The digital waveforms affected vary from CH1, CH2, CH3, CH4, Math1, Math2, Math3, Math4, and D0 through D15. When zoom is set on any one of the waveforms from D0 through D15, it would apply to all of the waveforms (D0 through D15).

Usage

Using the .query() method will send the ZOOm:ZOOM1:DCHAN:DISplay? query.
Using the .verify(value) method will send the ZOOm:ZOOM1:DCHAN:DISplay? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the ZOOm:ZOOM1:DCHAN:DISplay value command.

SCPI Syntax

- ZOOm:ZOOM1:DCHAN:DISplay {ON|OFF|<NR1>}
- ZOOm:ZOOM1:DCHAN:DISplay?

Info

<NR1> = 0 disables the specified zoom; any other value enables the specified zoom.
OFF disables the specified zoom.
ON displays the specified zoom.

ZoomZoom1DchanDisplay ¶

Bases: SCPICmdWrite, SCPICmdRead

The ZOOm:ZOOM1:DCHAN:DISplay command.

Description

This command sets or queries the display of the digital waveforms for the specified zoom, where x is an integer from 1 to 4 representing the desired zoom window. The digital waveforms affected vary from CH1, CH2, CH3, CH4, Math1, Math2, Math3, Math4, and D0 through D15. When zoom is set on any one of the waveforms from D0 through D15, it would apply to all of the waveforms (D0 through D15).

Usage

Using the .query() method will send the ZOOm:ZOOM1:DCHAN:DISplay? query.
Using the .verify(value) method will send the ZOOm:ZOOM1:DCHAN:DISplay? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the ZOOm:ZOOM1:DCHAN:DISplay value command.

SCPI Syntax

- ZOOm:ZOOM1:DCHAN:DISplay {ON|OFF|<NR1>}
- ZOOm:ZOOM1:DCHAN:DISplay?

Info

<NR1> = 0 disables the specified zoom; any other value enables the specified zoom.
OFF disables the specified zoom.
ON displays the specified zoom.

ZoomZoom1DigitalBit ¶

Bases: ValidatedDigitalBit, SCPICmdRead

The ZOOm:ZOOM1:D<x> command tree.

Usage

Using the .query() method will send the ZOOm:ZOOM1:D<x>? query.
Using the .verify(value) method will send the ZOOm:ZOOM1:D<x>? query and raise an AssertionError if the returned value does not match value.

Properties

.display: The ZOOm:ZOOM1:D<x>:DISplay command.
.horizontal: The ZOOm:ZOOM1:D<x>:HORizontal command tree.
.vertical: The ZOOm:ZOOM1:D<x>:VERTical command tree.

display `property` ¶

display: ZoomZoom1DigitalBitDisplay

Return the ZOOm:ZOOM1:D<x>:DISplay command.

Description

This command sets or queries the display of the specified waveform for the specified zoom, where x is an integer from 1 to 4 representing the desired zoom window. The waveform affected is determine by which can vary from CH1, CH2, CH3, CH4, Math1, Math2, Math3, Math4, Ref1, Ref2, Ref3, or Ref4.

Usage

Using the .query() method will send the ZOOm:ZOOM1:D<x>:DISplay? query.
Using the .verify(value) method will send the ZOOm:ZOOM1:D<x>:DISplay? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the ZOOm:ZOOM1:D<x>:DISplay value command.

SCPI Syntax

- ZOOm:ZOOM1:D<x>:DISplay {ON|OFF|<NR1>}
- ZOOm:ZOOM1:D<x>:DISplay?

Info

<NR1> A zero disables the specified zoom; any other value enables the specified zoom.
OFF disables the specified zoom.
ON displays the specified zoom.

horizontal `property` ¶

horizontal: ZoomZoom1DigitalBitHorizontal

Return the ZOOm:ZOOM1:D<x>:HORizontal command tree.

Usage

Using the .query() method will send the ZOOm:ZOOM1:D<x>:HORizontal? query.
Using the .verify(value) method will send the ZOOm:ZOOM1:D<x>:HORizontal? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.position: The ZOOm:ZOOM1:D<x>:HORizontal:POSition command.
.scale: The ZOOm:ZOOM1:D<x>:HORizontal:SCAle command.

vertical `property` ¶

vertical: ZoomZoom1DigitalBitVertical

Return the ZOOm:ZOOM1:D<x>:VERTical command tree.

Usage

Using the .query() method will send the ZOOm:ZOOM1:D<x>:VERTical? query.
Using the .verify(value) method will send the ZOOm:ZOOM1:D<x>:VERTical? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.position: The ZOOm:ZOOM1:D<x>:VERTical:POSition command.
.scale: The ZOOm:ZOOM1:D<x>:VERTical:SCAle command.

ZoomZoom1DigitalBitDisplay ¶

Bases: SCPICmdWrite, SCPICmdRead

The ZOOm:ZOOM1:D<x>:DISplay command.

Description

This command sets or queries the display of the specified waveform for the specified zoom, where x is an integer from 1 to 4 representing the desired zoom window. The waveform affected is determine by which can vary from CH1, CH2, CH3, CH4, Math1, Math2, Math3, Math4, Ref1, Ref2, Ref3, or Ref4.

Usage

Using the .query() method will send the ZOOm:ZOOM1:D<x>:DISplay? query.
Using the .verify(value) method will send the ZOOm:ZOOM1:D<x>:DISplay? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the ZOOm:ZOOM1:D<x>:DISplay value command.

SCPI Syntax

- ZOOm:ZOOM1:D<x>:DISplay {ON|OFF|<NR1>}
- ZOOm:ZOOM1:D<x>:DISplay?

Info

<NR1> A zero disables the specified zoom; any other value enables the specified zoom.
OFF disables the specified zoom.
ON displays the specified zoom.

ZoomZoom1DigitalBitHorizontal ¶

Bases: SCPICmdRead

The ZOOm:ZOOM1:D<x>:HORizontal command tree.

Usage

Using the .query() method will send the ZOOm:ZOOM1:D<x>:HORizontal? query.
Using the .verify(value) method will send the ZOOm:ZOOM1:D<x>:HORizontal? query and raise an AssertionError if the returned value does not match value.

Properties

.position: The ZOOm:ZOOM1:D<x>:HORizontal:POSition command.
.scale: The ZOOm:ZOOM1:D<x>:HORizontal:SCAle command.

position `property` ¶

position: ZoomZoom1DigitalBitHorizontalPosition

Return the ZOOm:ZOOM1:D<x>:HORizontal:POSition command.

Description

This command sets or queries the horizontal position of the specified waveform for the specified zoom, where x is an integer from 1 to 4 representing the desired zoom window. The setting of the ZOOM:ZOOMX:SCROLLLOCK command determines the waveforms that are affected. The waveform affected is determine by which can vary from CH1, CH2, CH3, CH4, Math1, Math2, Math3, Math4, Ref1, Ref2, Ref3, or Ref4.

Usage

Using the .query() method will send the ZOOm:ZOOM1:D<x>:HORizontal:POSition? query.
Using the .verify(value) method will send the ZOOm:ZOOM1:D<x>:HORizontal:POSition? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the ZOOm:ZOOM1:D<x>:HORizontal:POSition value command.

SCPI Syntax

- ZOOm:ZOOM1:D<x>:HORizontal:POSition <NR3>
- ZOOm:ZOOM1:D<x>:HORizontal:POSition?

Info

<NR3> is a value from 0 to 100.00 and is the percent of the waveform that is to the left of screen center, when the zoom factor is 1× or greater.

scale `property` ¶

scale: ZoomZoom1DigitalBitHorizontalScale

Return the ZOOm:ZOOM1:D<x>:HORizontal:SCAle command.

Description

This command sets or queries the zoom horizontal scale factor of the specified waveform for the specified zoom, where x is an integer from 1 to 4 representing the desired zoom window. The waveform affected is determine by which can vary from CH1, CH2, CH3, CH4, Math1, Math2, Math3, Math4, Ref1, Ref2, Ref3, or Ref4.

Usage

Using the .query() method will send the ZOOm:ZOOM1:D<x>:HORizontal:SCAle? query.
Using the .verify(value) method will send the ZOOm:ZOOM1:D<x>:HORizontal:SCAle? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the ZOOm:ZOOM1:D<x>:HORizontal:SCAle value command.

SCPI Syntax

- ZOOm:ZOOM1:D<x>:HORizontal:SCAle <NR3>
- ZOOm:ZOOM1:D<x>:HORizontal:SCAle?

Info

<NR3> is the amount of expansion in the horizontal direction in 1-2-5 increments.

ZoomZoom1DigitalBitHorizontalPosition ¶

Bases: SCPICmdWrite, SCPICmdRead

The ZOOm:ZOOM1:D<x>:HORizontal:POSition command.

Description

This command sets or queries the horizontal position of the specified waveform for the specified zoom, where x is an integer from 1 to 4 representing the desired zoom window. The setting of the ZOOM:ZOOMX:SCROLLLOCK command determines the waveforms that are affected. The waveform affected is determine by which can vary from CH1, CH2, CH3, CH4, Math1, Math2, Math3, Math4, Ref1, Ref2, Ref3, or Ref4.

Usage

Using the .query() method will send the ZOOm:ZOOM1:D<x>:HORizontal:POSition? query.
Using the .verify(value) method will send the ZOOm:ZOOM1:D<x>:HORizontal:POSition? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the ZOOm:ZOOM1:D<x>:HORizontal:POSition value command.

SCPI Syntax

- ZOOm:ZOOM1:D<x>:HORizontal:POSition <NR3>
- ZOOm:ZOOM1:D<x>:HORizontal:POSition?

Info

<NR3> is a value from 0 to 100.00 and is the percent of the waveform that is to the left of screen center, when the zoom factor is 1× or greater.

ZoomZoom1DigitalBitHorizontalScale ¶

Bases: SCPICmdWrite, SCPICmdRead

The ZOOm:ZOOM1:D<x>:HORizontal:SCAle command.

Description

This command sets or queries the zoom horizontal scale factor of the specified waveform for the specified zoom, where x is an integer from 1 to 4 representing the desired zoom window. The waveform affected is determine by which can vary from CH1, CH2, CH3, CH4, Math1, Math2, Math3, Math4, Ref1, Ref2, Ref3, or Ref4.

Usage

Using the .query() method will send the ZOOm:ZOOM1:D<x>:HORizontal:SCAle? query.
Using the .verify(value) method will send the ZOOm:ZOOM1:D<x>:HORizontal:SCAle? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the ZOOm:ZOOM1:D<x>:HORizontal:SCAle value command.

SCPI Syntax

- ZOOm:ZOOM1:D<x>:HORizontal:SCAle <NR3>
- ZOOm:ZOOM1:D<x>:HORizontal:SCAle?

Info

<NR3> is the amount of expansion in the horizontal direction in 1-2-5 increments.

ZoomZoom1DigitalBitVertical ¶

Bases: SCPICmdRead

The ZOOm:ZOOM1:D<x>:VERTical command tree.

Usage

Using the .query() method will send the ZOOm:ZOOM1:D<x>:VERTical? query.
Using the .verify(value) method will send the ZOOm:ZOOM1:D<x>:VERTical? query and raise an AssertionError if the returned value does not match value.

Properties

.position: The ZOOm:ZOOM1:D<x>:VERTical:POSition command.
.scale: The ZOOm:ZOOM1:D<x>:VERTical:SCAle command.

position `property` ¶

position: ZoomZoom1DigitalBitVerticalPosition

Return the ZOOm:ZOOM1:D<x>:VERTical:POSition command.

Description

This command sets or queries the vertical position of the specified waveform for the specified zoom, where x is an integer from 1 to 4 representing the desired zoom window. The setting of the ZOOm:1:SCROLLLOCk command determines the waveforms that are affected. The can be a channel, math, or reference waveform. The waveform affected is determine by which can vary from CH1, CH2, CH3, CH4, Math1, Math2, Math3, Math4, Ref1, Ref2, Ref3, or Ref4.

Usage

Using the .query() method will send the ZOOm:ZOOM1:D<x>:VERTical:POSition? query.
Using the .verify(value) method will send the ZOOm:ZOOM1:D<x>:VERTical:POSition? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the ZOOm:ZOOM1:D<x>:VERTical:POSition value command.

SCPI Syntax

- ZOOm:ZOOM1:D<x>:VERTical:POSition <NR3>
- ZOOm:ZOOM1:D<x>:VERTical:POSition?

Info

<NR3> is the vertical position, expressed in divisions.

scale `property` ¶

scale: ZoomZoom1DigitalBitVerticalScale

Return the ZOOm:ZOOM1:D<x>:VERTical:SCAle command.

Description

This command sets or queries the zoom vertical scale of the specified waveform for the specified zoom, where x is an integer from 1 to 4 representing the desired zoom window. The waveform affected is determine by which can vary from CH1, CH2, CH3, CH4, Math1, Math2, Math3, Math4, Ref1, Ref2, Ref3, or Ref4.

Usage

Using the .query() method will send the ZOOm:ZOOM1:D<x>:VERTical:SCAle? query.
Using the .verify(value) method will send the ZOOm:ZOOM1:D<x>:VERTical:SCAle? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the ZOOm:ZOOM1:D<x>:VERTical:SCAle value command.

SCPI Syntax

- ZOOm:ZOOM1:D<x>:VERTical:SCAle <NR3>
- ZOOm:ZOOM1:D<x>:VERTical:SCAle?

Info

<NR3> is the amount of vertical expansion or compression, which operates on a 1-2-5 sequence (for example, 1, 2, 5, 10, 20, 50, 100…). Based on the value that you entered, this command uses the nearest scale factor. Setting the vertical scale to 1 indicates unity (no zoom).

ZoomZoom1DigitalBitVerticalPosition ¶

Bases: SCPICmdWrite, SCPICmdRead

The ZOOm:ZOOM1:D<x>:VERTical:POSition command.

Description

This command sets or queries the vertical position of the specified waveform for the specified zoom, where x is an integer from 1 to 4 representing the desired zoom window. The setting of the ZOOm:1:SCROLLLOCk command determines the waveforms that are affected. The can be a channel, math, or reference waveform. The waveform affected is determine by which can vary from CH1, CH2, CH3, CH4, Math1, Math2, Math3, Math4, Ref1, Ref2, Ref3, or Ref4.

Usage

Using the .query() method will send the ZOOm:ZOOM1:D<x>:VERTical:POSition? query.
Using the .verify(value) method will send the ZOOm:ZOOM1:D<x>:VERTical:POSition? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the ZOOm:ZOOM1:D<x>:VERTical:POSition value command.

SCPI Syntax

- ZOOm:ZOOM1:D<x>:VERTical:POSition <NR3>
- ZOOm:ZOOM1:D<x>:VERTical:POSition?

Info

<NR3> is the vertical position, expressed in divisions.

ZoomZoom1DigitalBitVerticalScale ¶

Bases: SCPICmdWrite, SCPICmdRead

The ZOOm:ZOOM1:D<x>:VERTical:SCAle command.

Description

This command sets or queries the zoom vertical scale of the specified waveform for the specified zoom, where x is an integer from 1 to 4 representing the desired zoom window. The waveform affected is determine by which can vary from CH1, CH2, CH3, CH4, Math1, Math2, Math3, Math4, Ref1, Ref2, Ref3, or Ref4.

Usage

Using the .query() method will send the ZOOm:ZOOM1:D<x>:VERTical:SCAle? query.
Using the .verify(value) method will send the ZOOm:ZOOM1:D<x>:VERTical:SCAle? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the ZOOm:ZOOM1:D<x>:VERTical:SCAle value command.

SCPI Syntax

- ZOOm:ZOOM1:D<x>:VERTical:SCAle <NR3>
- ZOOm:ZOOM1:D<x>:VERTical:SCAle?

Info

<NR3> is the amount of vertical expansion or compression, which operates on a 1-2-5 sequence (for example, 1, 2, 5, 10, 20, 50, 100…). Based on the value that you entered, this command uses the nearest scale factor. Setting the vertical scale to 1 indicates unity (no zoom).

ZoomZoom1MathItem ¶

Bases: ValidatedDynamicNumberCmd, SCPICmdRead

The ZOOm:ZOOM1:MATH<x> command tree.

Usage

Using the .query() method will send the ZOOm:ZOOM1:MATH<x>? query.
Using the .verify(value) method will send the ZOOm:ZOOM1:MATH<x>? query and raise an AssertionError if the returned value does not match value.

Properties

.display: The ZOOm:ZOOM1:MATH<x>:DISplay command.
.horizontal: The ZOOm:ZOOM1:MATH<x>:HORizontal command tree.
.vertical: The ZOOm:ZOOM1:MATH<x>:VERTical command tree.

display `property` ¶

display: ZoomZoom1MathItemDisplay

Return the ZOOm:ZOOM1:MATH<x>:DISplay command.

Description

This command sets or queries the display of the specified waveform for the specified zoom, where x is an integer from 1 to 4 representing the desired zoom window. The waveform affected is determine by which can vary from CH1, CH2, CH3, CH4, Math1, Math2, Math3, Math4, Ref1, Ref2, Ref3, or Ref4.

Usage

Using the .query() method will send the ZOOm:ZOOM1:MATH<x>:DISplay? query.
Using the .verify(value) method will send the ZOOm:ZOOM1:MATH<x>:DISplay? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the ZOOm:ZOOM1:MATH<x>:DISplay value command.

SCPI Syntax

- ZOOm:ZOOM1:MATH<x>:DISplay {ON|OFF|<NR1>}
- ZOOm:ZOOM1:MATH<x>:DISplay?

Info

<NR1> A zero disables the specified zoom; any other value enables the specified zoom.
OFF disables the specified zoom.
ON displays the specified zoom.

horizontal `property` ¶

horizontal: ZoomZoom1MathItemHorizontal

Return the ZOOm:ZOOM1:MATH<x>:HORizontal command tree.

Usage

Using the .query() method will send the ZOOm:ZOOM1:MATH<x>:HORizontal? query.
Using the .verify(value) method will send the ZOOm:ZOOM1:MATH<x>:HORizontal? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.position: The ZOOm:ZOOM1:MATH<x>:HORizontal:POSition command.
.scale: The ZOOm:ZOOM1:MATH<x>:HORizontal:SCAle command.

vertical `property` ¶

vertical: ZoomZoom1MathItemVertical

Return the ZOOm:ZOOM1:MATH<x>:VERTical command tree.

Usage

Using the .query() method will send the ZOOm:ZOOM1:MATH<x>:VERTical? query.
Using the .verify(value) method will send the ZOOm:ZOOM1:MATH<x>:VERTical? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.position: The ZOOm:ZOOM1:MATH<x>:VERTical:POSition command.
.scale: The ZOOm:ZOOM1:MATH<x>:VERTical:SCAle command.

ZoomZoom1MathItemDisplay ¶

Bases: SCPICmdWrite, SCPICmdRead

The ZOOm:ZOOM1:MATH<x>:DISplay command.

Description

This command sets or queries the display of the specified waveform for the specified zoom, where x is an integer from 1 to 4 representing the desired zoom window. The waveform affected is determine by which can vary from CH1, CH2, CH3, CH4, Math1, Math2, Math3, Math4, Ref1, Ref2, Ref3, or Ref4.

Usage

Using the .query() method will send the ZOOm:ZOOM1:MATH<x>:DISplay? query.
Using the .verify(value) method will send the ZOOm:ZOOM1:MATH<x>:DISplay? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the ZOOm:ZOOM1:MATH<x>:DISplay value command.

SCPI Syntax

- ZOOm:ZOOM1:MATH<x>:DISplay {ON|OFF|<NR1>}
- ZOOm:ZOOM1:MATH<x>:DISplay?

Info

<NR1> A zero disables the specified zoom; any other value enables the specified zoom.
OFF disables the specified zoom.
ON displays the specified zoom.

ZoomZoom1MathItemHorizontal ¶

Bases: SCPICmdRead

The ZOOm:ZOOM1:MATH<x>:HORizontal command tree.

Usage

Using the .query() method will send the ZOOm:ZOOM1:MATH<x>:HORizontal? query.
Using the .verify(value) method will send the ZOOm:ZOOM1:MATH<x>:HORizontal? query and raise an AssertionError if the returned value does not match value.

Properties

.position: The ZOOm:ZOOM1:MATH<x>:HORizontal:POSition command.
.scale: The ZOOm:ZOOM1:MATH<x>:HORizontal:SCAle command.

position `property` ¶

position: ZoomZoom1MathItemHorizontalPosition

Return the ZOOm:ZOOM1:MATH<x>:HORizontal:POSition command.

Description

This command sets or queries the horizontal position of the specified waveform for the specified zoom, where x is an integer from 1 to 4 representing the desired zoom window. The setting of the ZOOM:ZOOMX:SCROLLLOCK command determines the waveforms that are affected. The waveform affected is determine by which can vary from CH1, CH2, CH3, CH4, Math1, Math2, Math3, Math4, Ref1, Ref2, Ref3, or Ref4.

Usage

Using the .query() method will send the ZOOm:ZOOM1:MATH<x>:HORizontal:POSition? query.
Using the .verify(value) method will send the ZOOm:ZOOM1:MATH<x>:HORizontal:POSition? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the ZOOm:ZOOM1:MATH<x>:HORizontal:POSition value command.

SCPI Syntax

- ZOOm:ZOOM1:MATH<x>:HORizontal:POSition <NR3>
- ZOOm:ZOOM1:MATH<x>:HORizontal:POSition?

Info

<NR3> is a value from 0 to 100.00 and is the percent of the waveform that is to the left of screen center, when the zoom factor is 1× or greater.

scale `property` ¶

scale: ZoomZoom1MathItemHorizontalScale

Return the ZOOm:ZOOM1:MATH<x>:HORizontal:SCAle command.

Description

This command sets or queries the zoom horizontal scale factor of the specified waveform for the specified zoom, where x is an integer from 1 to 4 representing the desired zoom window. The waveform affected is determine by which can vary from CH1, CH2, CH3, CH4, Math1, Math2, Math3, Math4, Ref1, Ref2, Ref3, or Ref4.

Usage

Using the .query() method will send the ZOOm:ZOOM1:MATH<x>:HORizontal:SCAle? query.
Using the .verify(value) method will send the ZOOm:ZOOM1:MATH<x>:HORizontal:SCAle? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the ZOOm:ZOOM1:MATH<x>:HORizontal:SCAle value command.

SCPI Syntax

- ZOOm:ZOOM1:MATH<x>:HORizontal:SCAle <NR3>
- ZOOm:ZOOM1:MATH<x>:HORizontal:SCAle?

Info

<NR3> is the amount of expansion in the horizontal direction in 1-2-5 increments.

ZoomZoom1MathItemHorizontalPosition ¶

Bases: SCPICmdWrite, SCPICmdRead

The ZOOm:ZOOM1:MATH<x>:HORizontal:POSition command.

Description

This command sets or queries the horizontal position of the specified waveform for the specified zoom, where x is an integer from 1 to 4 representing the desired zoom window. The setting of the ZOOM:ZOOMX:SCROLLLOCK command determines the waveforms that are affected. The waveform affected is determine by which can vary from CH1, CH2, CH3, CH4, Math1, Math2, Math3, Math4, Ref1, Ref2, Ref3, or Ref4.

Usage

Using the .query() method will send the ZOOm:ZOOM1:MATH<x>:HORizontal:POSition? query.
Using the .verify(value) method will send the ZOOm:ZOOM1:MATH<x>:HORizontal:POSition? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the ZOOm:ZOOM1:MATH<x>:HORizontal:POSition value command.

SCPI Syntax

- ZOOm:ZOOM1:MATH<x>:HORizontal:POSition <NR3>
- ZOOm:ZOOM1:MATH<x>:HORizontal:POSition?

Info

<NR3> is a value from 0 to 100.00 and is the percent of the waveform that is to the left of screen center, when the zoom factor is 1× or greater.

ZoomZoom1MathItemHorizontalScale ¶

Bases: SCPICmdWrite, SCPICmdRead

The ZOOm:ZOOM1:MATH<x>:HORizontal:SCAle command.

Description

This command sets or queries the zoom horizontal scale factor of the specified waveform for the specified zoom, where x is an integer from 1 to 4 representing the desired zoom window. The waveform affected is determine by which can vary from CH1, CH2, CH3, CH4, Math1, Math2, Math3, Math4, Ref1, Ref2, Ref3, or Ref4.

Usage

Using the .query() method will send the ZOOm:ZOOM1:MATH<x>:HORizontal:SCAle? query.
Using the .verify(value) method will send the ZOOm:ZOOM1:MATH<x>:HORizontal:SCAle? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the ZOOm:ZOOM1:MATH<x>:HORizontal:SCAle value command.

SCPI Syntax

- ZOOm:ZOOM1:MATH<x>:HORizontal:SCAle <NR3>
- ZOOm:ZOOM1:MATH<x>:HORizontal:SCAle?

Info

<NR3> is the amount of expansion in the horizontal direction in 1-2-5 increments.

ZoomZoom1MathItemVertical ¶

Bases: SCPICmdRead

The ZOOm:ZOOM1:MATH<x>:VERTical command tree.

Usage

Using the .query() method will send the ZOOm:ZOOM1:MATH<x>:VERTical? query.
Using the .verify(value) method will send the ZOOm:ZOOM1:MATH<x>:VERTical? query and raise an AssertionError if the returned value does not match value.

Properties

.position: The ZOOm:ZOOM1:MATH<x>:VERTical:POSition command.
.scale: The ZOOm:ZOOM1:MATH<x>:VERTical:SCAle command.

position `property` ¶

position: ZoomZoom1MathItemVerticalPosition

Return the ZOOm:ZOOM1:MATH<x>:VERTical:POSition command.

Description

This command sets or queries the vertical position of the specified waveform for the specified zoom, where x is an integer from 1 to 4 representing the desired zoom window. The setting of the ZOOm:1:SCROLLLOCk command determines the waveforms that are affected. The can be a channel, math, or reference waveform. The waveform affected is determine by which can vary from CH1, CH2, CH3, CH4, Math1, Math2, Math3, Math4, Ref1, Ref2, Ref3, or Ref4.

Usage

Using the .query() method will send the ZOOm:ZOOM1:MATH<x>:VERTical:POSition? query.
Using the .verify(value) method will send the ZOOm:ZOOM1:MATH<x>:VERTical:POSition? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the ZOOm:ZOOM1:MATH<x>:VERTical:POSition value command.

SCPI Syntax

- ZOOm:ZOOM1:MATH<x>:VERTical:POSition <NR3>
- ZOOm:ZOOM1:MATH<x>:VERTical:POSition?

Info

<NR3> is the vertical position, expressed in divisions.

scale `property` ¶

scale: ZoomZoom1MathItemVerticalScale

Return the ZOOm:ZOOM1:MATH<x>:VERTical:SCAle command.

Description

This command sets or queries the zoom vertical scale of the specified waveform for the specified zoom, where x is an integer from 1 to 4 representing the desired zoom window. The waveform affected is determine by which can vary from CH1, CH2, CH3, CH4, Math1, Math2, Math3, Math4, Ref1, Ref2, Ref3, or Ref4.

Usage

Using the .query() method will send the ZOOm:ZOOM1:MATH<x>:VERTical:SCAle? query.
Using the .verify(value) method will send the ZOOm:ZOOM1:MATH<x>:VERTical:SCAle? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the ZOOm:ZOOM1:MATH<x>:VERTical:SCAle value command.

SCPI Syntax

- ZOOm:ZOOM1:MATH<x>:VERTical:SCAle <NR3>
- ZOOm:ZOOM1:MATH<x>:VERTical:SCAle?

Info

<NR3> is the amount of vertical expansion or compression, which operates on a 1-2-5 sequence (for example, 1, 2, 5, 10, 20, 50, 100…). Based on the value that you entered, this command uses the nearest scale factor. Setting the vertical scale to 1 indicates unity (no zoom).

ZoomZoom1MathItemVerticalPosition ¶

Bases: SCPICmdWrite, SCPICmdRead

The ZOOm:ZOOM1:MATH<x>:VERTical:POSition command.

Description

This command sets or queries the vertical position of the specified waveform for the specified zoom, where x is an integer from 1 to 4 representing the desired zoom window. The setting of the ZOOm:1:SCROLLLOCk command determines the waveforms that are affected. The can be a channel, math, or reference waveform. The waveform affected is determine by which can vary from CH1, CH2, CH3, CH4, Math1, Math2, Math3, Math4, Ref1, Ref2, Ref3, or Ref4.

Usage

Using the .query() method will send the ZOOm:ZOOM1:MATH<x>:VERTical:POSition? query.
Using the .verify(value) method will send the ZOOm:ZOOM1:MATH<x>:VERTical:POSition? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the ZOOm:ZOOM1:MATH<x>:VERTical:POSition value command.

SCPI Syntax

- ZOOm:ZOOM1:MATH<x>:VERTical:POSition <NR3>
- ZOOm:ZOOM1:MATH<x>:VERTical:POSition?

Info

<NR3> is the vertical position, expressed in divisions.

ZoomZoom1MathItemVerticalScale ¶

Bases: SCPICmdWrite, SCPICmdRead

The ZOOm:ZOOM1:MATH<x>:VERTical:SCAle command.

Description

This command sets or queries the zoom vertical scale of the specified waveform for the specified zoom, where x is an integer from 1 to 4 representing the desired zoom window. The waveform affected is determine by which can vary from CH1, CH2, CH3, CH4, Math1, Math2, Math3, Math4, Ref1, Ref2, Ref3, or Ref4.

Usage

Using the .query() method will send the ZOOm:ZOOM1:MATH<x>:VERTical:SCAle? query.
Using the .verify(value) method will send the ZOOm:ZOOM1:MATH<x>:VERTical:SCAle? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the ZOOm:ZOOM1:MATH<x>:VERTical:SCAle value command.

SCPI Syntax

- ZOOm:ZOOM1:MATH<x>:VERTical:SCAle <NR3>
- ZOOm:ZOOM1:MATH<x>:VERTical:SCAle?

Info

<NR3> is the amount of vertical expansion or compression, which operates on a 1-2-5 sequence (for example, 1, 2, 5, 10, 20, 50, 100…). Based on the value that you entered, this command uses the nearest scale factor. Setting the vertical scale to 1 indicates unity (no zoom).

ZoomZoom1RefItem ¶

Bases: ValidatedDynamicNumberCmd, SCPICmdRead

The ZOOm:ZOOM1:REF<x> command tree.

Usage

Using the .query() method will send the ZOOm:ZOOM1:REF<x>? query.
Using the .verify(value) method will send the ZOOm:ZOOM1:REF<x>? query and raise an AssertionError if the returned value does not match value.

Properties

.display: The ZOOm:ZOOM1:REF<x>:DISplay command.
.horizontal: The ZOOm:ZOOM1:REF<x>:HORizontal command tree.
.vertical: The ZOOm:ZOOM1:REF<x>:VERTical command tree.

display `property` ¶

display: ZoomZoom1RefItemDisplay

Return the ZOOm:ZOOM1:REF<x>:DISplay command.

Description

This command sets or queries the display of the specified waveform for the specified zoom, where x is an integer from 1 to 4 representing the desired zoom window. The waveform affected is determine by which can vary from CH1, CH2, CH3, CH4, Math1, Math2, Math3, Math4, Ref1, Ref2, Ref3, or Ref4.

Usage

Using the .query() method will send the ZOOm:ZOOM1:REF<x>:DISplay? query.
Using the .verify(value) method will send the ZOOm:ZOOM1:REF<x>:DISplay? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the ZOOm:ZOOM1:REF<x>:DISplay value command.

SCPI Syntax

- ZOOm:ZOOM1:REF<x>:DISplay {ON|OFF|<NR1>}
- ZOOm:ZOOM1:REF<x>:DISplay?

Info

<NR1> A zero disables the specified zoom; any other value enables the specified zoom.
OFF disables the specified zoom.
ON displays the specified zoom.

horizontal `property` ¶

horizontal: ZoomZoom1RefItemHorizontal

Return the ZOOm:ZOOM1:REF<x>:HORizontal command tree.

Usage

Using the .query() method will send the ZOOm:ZOOM1:REF<x>:HORizontal? query.
Using the .verify(value) method will send the ZOOm:ZOOM1:REF<x>:HORizontal? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.position: The ZOOm:ZOOM1:REF<x>:HORizontal:POSition command.
.scale: The ZOOm:ZOOM1:REF<x>:HORizontal:SCAle command.

vertical `property` ¶

vertical: ZoomZoom1RefItemVertical

Return the ZOOm:ZOOM1:REF<x>:VERTical command tree.

Usage

Using the .query() method will send the ZOOm:ZOOM1:REF<x>:VERTical? query.
Using the .verify(value) method will send the ZOOm:ZOOM1:REF<x>:VERTical? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.position: The ZOOm:ZOOM1:REF<x>:VERTical:POSition command.
.scale: The ZOOm:ZOOM1:REF<x>:VERTical:SCAle command.

ZoomZoom1RefItemDisplay ¶

Bases: SCPICmdWrite, SCPICmdRead

The ZOOm:ZOOM1:REF<x>:DISplay command.

Description

This command sets or queries the display of the specified waveform for the specified zoom, where x is an integer from 1 to 4 representing the desired zoom window. The waveform affected is determine by which can vary from CH1, CH2, CH3, CH4, Math1, Math2, Math3, Math4, Ref1, Ref2, Ref3, or Ref4.

Usage

Using the .query() method will send the ZOOm:ZOOM1:REF<x>:DISplay? query.
Using the .verify(value) method will send the ZOOm:ZOOM1:REF<x>:DISplay? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the ZOOm:ZOOM1:REF<x>:DISplay value command.

SCPI Syntax

- ZOOm:ZOOM1:REF<x>:DISplay {ON|OFF|<NR1>}
- ZOOm:ZOOM1:REF<x>:DISplay?

Info

<NR1> A zero disables the specified zoom; any other value enables the specified zoom.
OFF disables the specified zoom.
ON displays the specified zoom.

ZoomZoom1RefItemHorizontal ¶

Bases: SCPICmdRead

The ZOOm:ZOOM1:REF<x>:HORizontal command tree.

Usage

Using the .query() method will send the ZOOm:ZOOM1:REF<x>:HORizontal? query.
Using the .verify(value) method will send the ZOOm:ZOOM1:REF<x>:HORizontal? query and raise an AssertionError if the returned value does not match value.

Properties

.position: The ZOOm:ZOOM1:REF<x>:HORizontal:POSition command.
.scale: The ZOOm:ZOOM1:REF<x>:HORizontal:SCAle command.

position `property` ¶

position: ZoomZoom1RefItemHorizontalPosition

Return the ZOOm:ZOOM1:REF<x>:HORizontal:POSition command.

Description

This command sets or queries the horizontal position of the specified waveform for the specified zoom, where x is an integer from 1 to 4 representing the desired zoom window. The setting of the ZOOM:ZOOMX:SCROLLLOCK command determines the waveforms that are affected. The waveform affected is determine by which can vary from CH1, CH2, CH3, CH4, Math1, Math2, Math3, Math4, Ref1, Ref2, Ref3, or Ref4.

Usage

Using the .query() method will send the ZOOm:ZOOM1:REF<x>:HORizontal:POSition? query.
Using the .verify(value) method will send the ZOOm:ZOOM1:REF<x>:HORizontal:POSition? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the ZOOm:ZOOM1:REF<x>:HORizontal:POSition value command.

SCPI Syntax

- ZOOm:ZOOM1:REF<x>:HORizontal:POSition <NR3>
- ZOOm:ZOOM1:REF<x>:HORizontal:POSition?

Info

<NR3> is a value from 0 to 100.00 and is the percent of the waveform that is to the left of screen center, when the zoom factor is 1× or greater.

scale `property` ¶

scale: ZoomZoom1RefItemHorizontalScale

Return the ZOOm:ZOOM1:REF<x>:HORizontal:SCAle command.

Description

This command sets or queries the zoom horizontal scale factor of the specified waveform for the specified zoom, where x is an integer from 1 to 4 representing the desired zoom window. The waveform affected is determine by which can vary from CH1, CH2, CH3, CH4, Math1, Math2, Math3, Math4, Ref1, Ref2, Ref3, or Ref4.

Usage

Using the .query() method will send the ZOOm:ZOOM1:REF<x>:HORizontal:SCAle? query.
Using the .verify(value) method will send the ZOOm:ZOOM1:REF<x>:HORizontal:SCAle? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the ZOOm:ZOOM1:REF<x>:HORizontal:SCAle value command.

SCPI Syntax

- ZOOm:ZOOM1:REF<x>:HORizontal:SCAle <NR3>
- ZOOm:ZOOM1:REF<x>:HORizontal:SCAle?

Info

<NR3> is the amount of expansion in the horizontal direction in 1-2-5 increments.

ZoomZoom1RefItemHorizontalPosition ¶

Bases: SCPICmdWrite, SCPICmdRead

The ZOOm:ZOOM1:REF<x>:HORizontal:POSition command.

Description

This command sets or queries the horizontal position of the specified waveform for the specified zoom, where x is an integer from 1 to 4 representing the desired zoom window. The setting of the ZOOM:ZOOMX:SCROLLLOCK command determines the waveforms that are affected. The waveform affected is determine by which can vary from CH1, CH2, CH3, CH4, Math1, Math2, Math3, Math4, Ref1, Ref2, Ref3, or Ref4.

Usage

Using the .query() method will send the ZOOm:ZOOM1:REF<x>:HORizontal:POSition? query.
Using the .verify(value) method will send the ZOOm:ZOOM1:REF<x>:HORizontal:POSition? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the ZOOm:ZOOM1:REF<x>:HORizontal:POSition value command.

SCPI Syntax

- ZOOm:ZOOM1:REF<x>:HORizontal:POSition <NR3>
- ZOOm:ZOOM1:REF<x>:HORizontal:POSition?

Info

<NR3> is a value from 0 to 100.00 and is the percent of the waveform that is to the left of screen center, when the zoom factor is 1× or greater.

ZoomZoom1RefItemHorizontalScale ¶

Bases: SCPICmdWrite, SCPICmdRead

The ZOOm:ZOOM1:REF<x>:HORizontal:SCAle command.

Description

This command sets or queries the zoom horizontal scale factor of the specified waveform for the specified zoom, where x is an integer from 1 to 4 representing the desired zoom window. The waveform affected is determine by which can vary from CH1, CH2, CH3, CH4, Math1, Math2, Math3, Math4, Ref1, Ref2, Ref3, or Ref4.

Usage

Using the .query() method will send the ZOOm:ZOOM1:REF<x>:HORizontal:SCAle? query.
Using the .verify(value) method will send the ZOOm:ZOOM1:REF<x>:HORizontal:SCAle? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the ZOOm:ZOOM1:REF<x>:HORizontal:SCAle value command.

SCPI Syntax

- ZOOm:ZOOM1:REF<x>:HORizontal:SCAle <NR3>
- ZOOm:ZOOM1:REF<x>:HORizontal:SCAle?

Info

<NR3> is the amount of expansion in the horizontal direction in 1-2-5 increments.

ZoomZoom1RefItemVertical ¶

Bases: SCPICmdRead

The ZOOm:ZOOM1:REF<x>:VERTical command tree.

Usage

Using the .query() method will send the ZOOm:ZOOM1:REF<x>:VERTical? query.
Using the .verify(value) method will send the ZOOm:ZOOM1:REF<x>:VERTical? query and raise an AssertionError if the returned value does not match value.

Properties

.position: The ZOOm:ZOOM1:REF<x>:VERTical:POSition command.
.scale: The ZOOm:ZOOM1:REF<x>:VERTical:SCAle command.

position `property` ¶

position: ZoomZoom1RefItemVerticalPosition

Return the ZOOm:ZOOM1:REF<x>:VERTical:POSition command.

Description

This command sets or queries the vertical position of the specified waveform for the specified zoom, where x is an integer from 1 to 4 representing the desired zoom window. The setting of the ZOOm:1:SCROLLLOCk command determines the waveforms that are affected. The can be a channel, math, or reference waveform. The waveform affected is determine by which can vary from CH1, CH2, CH3, CH4, Math1, Math2, Math3, Math4, Ref1, Ref2, Ref3, or Ref4.

Usage

Using the .query() method will send the ZOOm:ZOOM1:REF<x>:VERTical:POSition? query.
Using the .verify(value) method will send the ZOOm:ZOOM1:REF<x>:VERTical:POSition? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the ZOOm:ZOOM1:REF<x>:VERTical:POSition value command.

SCPI Syntax

- ZOOm:ZOOM1:REF<x>:VERTical:POSition <NR3>
- ZOOm:ZOOM1:REF<x>:VERTical:POSition?

Info

<NR3> is the vertical position, expressed in divisions.

scale `property` ¶

scale: ZoomZoom1RefItemVerticalScale

Return the ZOOm:ZOOM1:REF<x>:VERTical:SCAle command.

Description

This command sets or queries the zoom vertical scale of the specified waveform for the specified zoom, where x is an integer from 1 to 4 representing the desired zoom window. The waveform affected is determine by which can vary from CH1, CH2, CH3, CH4, Math1, Math2, Math3, Math4, Ref1, Ref2, Ref3, or Ref4.

Usage

Using the .query() method will send the ZOOm:ZOOM1:REF<x>:VERTical:SCAle? query.
Using the .verify(value) method will send the ZOOm:ZOOM1:REF<x>:VERTical:SCAle? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the ZOOm:ZOOM1:REF<x>:VERTical:SCAle value command.

SCPI Syntax

- ZOOm:ZOOM1:REF<x>:VERTical:SCAle <NR3>
- ZOOm:ZOOM1:REF<x>:VERTical:SCAle?

Info

<NR3> is the amount of vertical expansion or compression, which operates on a 1-2-5 sequence (for example, 1, 2, 5, 10, 20, 50, 100…). Based on the value that you entered, this command uses the nearest scale factor. Setting the vertical scale to 1 indicates unity (no zoom).

ZoomZoom1RefItemVerticalPosition ¶

Bases: SCPICmdWrite, SCPICmdRead

The ZOOm:ZOOM1:REF<x>:VERTical:POSition command.

Description

This command sets or queries the vertical position of the specified waveform for the specified zoom, where x is an integer from 1 to 4 representing the desired zoom window. The setting of the ZOOm:1:SCROLLLOCk command determines the waveforms that are affected. The can be a channel, math, or reference waveform. The waveform affected is determine by which can vary from CH1, CH2, CH3, CH4, Math1, Math2, Math3, Math4, Ref1, Ref2, Ref3, or Ref4.

Usage

Using the .query() method will send the ZOOm:ZOOM1:REF<x>:VERTical:POSition? query.
Using the .verify(value) method will send the ZOOm:ZOOM1:REF<x>:VERTical:POSition? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the ZOOm:ZOOM1:REF<x>:VERTical:POSition value command.

SCPI Syntax

- ZOOm:ZOOM1:REF<x>:VERTical:POSition <NR3>
- ZOOm:ZOOM1:REF<x>:VERTical:POSition?

Info

<NR3> is the vertical position, expressed in divisions.

ZoomZoom1RefItemVerticalScale ¶

Bases: SCPICmdWrite, SCPICmdRead

The ZOOm:ZOOM1:REF<x>:VERTical:SCAle command.

Description

This command sets or queries the zoom vertical scale of the specified waveform for the specified zoom, where x is an integer from 1 to 4 representing the desired zoom window. The waveform affected is determine by which can vary from CH1, CH2, CH3, CH4, Math1, Math2, Math3, Math4, Ref1, Ref2, Ref3, or Ref4.

Usage

Using the .query() method will send the ZOOm:ZOOM1:REF<x>:VERTical:SCAle? query.
Using the .verify(value) method will send the ZOOm:ZOOM1:REF<x>:VERTical:SCAle? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the ZOOm:ZOOM1:REF<x>:VERTical:SCAle value command.

SCPI Syntax

- ZOOm:ZOOM1:REF<x>:VERTical:SCAle <NR3>
- ZOOm:ZOOM1:REF<x>:VERTical:SCAle?

Info

<NR3> is the amount of vertical expansion or compression, which operates on a 1-2-5 sequence (for example, 1, 2, 5, 10, 20, 50, 100…). Based on the value that you entered, this command uses the nearest scale factor. Setting the vertical scale to 1 indicates unity (no zoom).

ZoomZoom1Scrolllock ¶

Bases: SCPICmdWrite, SCPICmdRead

The ZOOm:ZOOM1:SCROLLLock command.

Description

This command sets or queries Scroll Lock for the specified zoom, where x is an integer from 1 to 4 representing the desired zoom window.

Usage

Using the .query() method will send the ZOOm:ZOOM1:SCROLLLock? query.
Using the .verify(value) method will send the ZOOm:ZOOM1:SCROLLLock? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the ZOOm:ZOOM1:SCROLLLock value command.

SCPI Syntax

- ZOOm:ZOOM1:SCROLLLock {ON|OFF|<NR1>}
- ZOOm:ZOOM1:SCROLLLock?

Info

ON locks waveforms for the specified zoom window .
OFF unlocks waveforms for the specified zoom window .
<NR1> = 0 unlocks waveforms for the specified zoom window ; any other value locks waveforms for the specified zoom window .

ZoomZoom1State ¶

Bases: SCPICmdWrite, SCPICmdRead

The ZOOm:ZOOM1:STATE command.

Description

This command turns the specified zoom on or off. can only be 1.

Usage

Using the .query() method will send the ZOOm:ZOOM1:STATE? query.
Using the .verify(value) method will send the ZOOm:ZOOM1:STATE? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the ZOOm:ZOOM1:STATE value command.

SCPI Syntax

- ZOOm:ZOOM1:STATE {ON|OFF|<NR1>}
- ZOOm:ZOOM1:STATE?

Info

ON turns Zoom 1 on.
OFF turns Zoom 1 off.
<NR1> is an integer. 0 disables the specified zoom; any other value enables the specified zoom.

zoom ¶

Zoom ¶

graticule property ¶

horizontal property ¶

math property ¶

mode property ¶

ref property ¶

scroll property ¶

state property ¶

vertical property ¶

zoom1 property ¶

ZoomGraticule ¶

size property ¶

split property ¶

ZoomGraticuleSize ¶

ZoomGraticuleSplit ¶

ZoomHorizontal ¶

position property ¶

scale property ¶

ZoomHorizontalPosition ¶

ZoomHorizontalScale ¶

ZoomMathItem ¶

horizontal property ¶

vertical property ¶

ZoomMathItemHorizontal ¶

position property ¶

scale property ¶

ZoomMathItemHorizontalPosition ¶

ZoomMathItemHorizontalScale ¶

ZoomMathItemVertical ¶

position property ¶

scale property ¶

ZoomMathItemVerticalPosition ¶

ZoomMathItemVerticalScale ¶

ZoomMode ¶

ZoomRefItem ¶

horizontal property ¶

vertical property ¶

ZoomRefItemHorizontal ¶

position property ¶

scale property ¶

ZoomRefItemHorizontalPosition ¶

ZoomRefItemHorizontalScale ¶

ZoomRefItemVertical ¶

position property ¶

scale property ¶

ZoomRefItemVerticalPosition ¶

ZoomRefItemVerticalScale ¶

ZoomScroll ¶

direction property ¶

lock property ¶

speed property ¶

ZoomScrollDirection ¶

ZoomScrollLock ¶

ZoomScrollSpeed ¶

ZoomState ¶

ZoomVertical ¶

position property ¶

scale property ¶

ZoomVerticalPosition ¶

ZoomVerticalScale ¶

ZoomZoom1 ¶

ch property ¶

d property ¶

dchan property ¶

math property ¶

ref property ¶

scrolllock property ¶

state property ¶

ZoomZoom1Channel ¶

display property ¶

horizontal property ¶

vertical property ¶

ZoomZoom1ChannelDisplay ¶

ZoomZoom1ChannelHorizontal ¶

position property ¶

scale property ¶

ZoomZoom1ChannelHorizontalPosition ¶

ZoomZoom1ChannelHorizontalScale ¶

ZoomZoom1ChannelVertical ¶

graticule `property` ¶

horizontal `property` ¶

math `property` ¶

mode `property` ¶

ref `property` ¶

scroll `property` ¶

state `property` ¶

vertical `property` ¶

zoom1 `property` ¶

size `property` ¶

split `property` ¶

position `property` ¶

scale `property` ¶

horizontal `property` ¶

vertical `property` ¶

position `property` ¶

scale `property` ¶

position `property` ¶

scale `property` ¶

horizontal `property` ¶

vertical `property` ¶

position `property` ¶

scale `property` ¶

position `property` ¶

scale `property` ¶

direction `property` ¶

lock `property` ¶

speed `property` ¶

position `property` ¶

scale `property` ¶

ch `property` ¶

d `property` ¶

dchan `property` ¶

math `property` ¶

ref `property` ¶

scrolllock `property` ¶

state `property` ¶

display `property` ¶

horizontal `property` ¶

vertical `property` ¶

position `property` ¶

scale `property` ¶

position `property` ¶

scale `property` ¶

display `property` ¶

display `property` ¶

horizontal `property` ¶

vertical `property` ¶

position `property` ¶

scale `property` ¶

position `property` ¶

scale `property` ¶

display `property` ¶

horizontal `property` ¶

vertical `property` ¶

position `property` ¶

scale `property` ¶

position `property` ¶

scale `property` ¶

display `property` ¶

horizontal `property` ¶

vertical `property` ¶

position `property` ¶

scale `property` ¶

position `property` ¶

scale `property` ¶