display ¶

The display commands module.

These commands are used in the following models: LPD6, MSO4, MSO4B, MSO5, MSO5B, MSO5LP, MSO6, MSO6B

THIS FILE IS AUTO-GENERATED, IT SHOULD NOT BE MANUALLY MODIFIED.

Please report an issue if one is found.

Commands and Queries

- DISplay:CH<x>:INVERTColor COLOR<x>
- DISplay:CH<x>:INVERTColor?
- DISplay:CH<x>:NORMALColor COLOR<x>
- DISplay:CH<x>:NORMALColor?
- DISplay:COLors {NORMal|INVERTed}
- DISplay:COLors?
- DISplay:GLObal:B<x>:STATE {ON|OFF|<NR1>}
- DISplay:GLObal:B<x>:STATE?
- DISplay:GLObal:CH<x>:STATE {ON|OFF|<NR1>}
- DISplay:GLObal:CH<x>:STATE?
- DISplay:GLObal:MATH<x>:STATE {ON|OFF|<NR1>}
- DISplay:GLObal:MATH<x>:STATE?
- DISplay:GLObal:PLOT<x>:STATE {ON|OFF|<NR1>}
- DISplay:GLObal:PLOT<x>:STATE?
- DISplay:GLObal:REF<x>:STATE {ON|OFF|<NR1>}
- DISplay:GLObal:REF<x>:STATE?
- DISplay:INTENSITy:BACKLight {LOW|MEDium|HIGH}
- DISplay:INTENSITy:BACKLight:AUTODim:ENAble {ON|OFF}
- DISplay:INTENSITy:BACKLight:AUTODim:ENAble?
- DISplay:INTENSITy:BACKLight:AUTODim:TIMe <NR1>
- DISplay:INTENSITy:BACKLight:AUTODim:TIMe?
- DISplay:INTENSITy:BACKLight?
- DISplay:INTENSITy?
- DISplay:MATH<x>:INVERTColor COLOR<x>
- DISplay:MATH<x>:INVERTColor?
- DISplay:MATH<x>:NORMALColor COLOR<x>
- DISplay:MATH<x>:NORMALColor?
- DISplay:MATHFFTView1:AUTOScale {ON|OFF|<NR1>}
- DISplay:MATHFFTView1:AUTOScale?
- DISplay:MATHFFTView1:CURSor:ASOUrce?
- DISplay:MATHFFTView1:CURSor:BSOUrce?
- DISplay:MATHFFTView1:CURSor:DDT?
- DISplay:MATHFFTView1:CURSor:FUNCtion {WAVEform|VBArs|HBArs|SCREEN}
- DISplay:MATHFFTView1:CURSor:FUNCtion?
- DISplay:MATHFFTView1:CURSor:HBArs:APOSition <NR3>
- DISplay:MATHFFTView1:CURSor:HBArs:APOSition?
- DISplay:MATHFFTView1:CURSor:HBArs:AUNIts?
- DISplay:MATHFFTView1:CURSor:HBArs:BPOSition <NR3>
- DISplay:MATHFFTView1:CURSor:HBArs:BPOSition?
- DISplay:MATHFFTView1:CURSor:HBArs:BUNIts?
- DISplay:MATHFFTView1:CURSor:HBArs:DELTa?
- DISplay:MATHFFTView1:CURSor:MODe {INDEPENDENT|TRACK}
- DISplay:MATHFFTView1:CURSor:ONEOVERDELTATVALUE?
- DISplay:MATHFFTView1:CURSor:ROLOCATION {GRATICULE|BADGE}
- DISplay:MATHFFTView1:CURSor:ROLOCATION?
- DISplay:MATHFFTView1:CURSor:SCREEN:AXPOSition <NR3>
- DISplay:MATHFFTView1:CURSor:SCREEN:AXPOSition?
- DISplay:MATHFFTView1:CURSor:SCREEN:AYPOSition <NR3>
- DISplay:MATHFFTView1:CURSor:SCREEN:AYPOSition?
- DISplay:MATHFFTView1:CURSor:SCREEN:BXPOSition <NR3>
- DISplay:MATHFFTView1:CURSor:SCREEN:BXPOSition?
- DISplay:MATHFFTView1:CURSor:SCREEN:BYPOSition <NR3>
- DISplay:MATHFFTView1:CURSor:SCREEN:BYPOSition?
- DISplay:MATHFFTView1:CURSor:STATE {ON|OFF|1|0}
- DISplay:MATHFFTView1:CURSor:STATE?
- DISplay:MATHFFTView1:CURSor:VBArs:APOSition <NR3>
- DISplay:MATHFFTView1:CURSor:VBArs:APOSition?
- DISplay:MATHFFTView1:CURSor:VBArs:AUNIts?
- DISplay:MATHFFTView1:CURSor:VBArs:BPOSition <NR3>
- DISplay:MATHFFTView1:CURSor:VBArs:BPOSition?
- DISplay:MATHFFTView1:CURSor:VBArs:BUNIts?
- DISplay:MATHFFTView1:CURSor:VBArs:DELTa?
- DISplay:MATHFFTView1:CURSor:WAVEform:APOSition <NR3>
- DISplay:MATHFFTView1:CURSor:WAVEform:APOSition?
- DISplay:MATHFFTView1:CURSor:WAVEform:BPOSition <NR3>
- DISplay:MATHFFTView1:CURSor:WAVEform:BPOSition?
- DISplay:MATHFFTView1:GRIDlines {HORizontal|VERTical|BOTH}
- DISplay:MATHFFTView1:GRIDlines?
- DISplay:MATHFFTView1:MATH:MATH<x>:STATE {ON|OFF|<NR1>}
- DISplay:MATHFFTView1:XAXIS:SCALE {LINEAr|LOG}
- DISplay:MATHFFTView1:XAXIS:SCALE?
- DISplay:MATHFFTView1:YAXIS:SCALE {LINEAr|DBM}
- DISplay:MATHFFTView1:YAXIS:SCALE?
- DISplay:MATHFFTView1:ZOOM:XAXIS:FROM <NR3>
- DISplay:MATHFFTView1:ZOOM:XAXIS:FROM?
- DISplay:MATHFFTView1:ZOOM:XAXIS:TO <NR3>
- DISplay:MATHFFTView1:ZOOM:XAXIS:TO?
- DISplay:MATHFFTView1:ZOOM:YAXIS:FROM <NR3>
- DISplay:MATHFFTView1:ZOOM:YAXIS:FROM?
- DISplay:MATHFFTView1:ZOOM:YAXIS:TO <NR3>
- DISplay:MATHFFTView1:ZOOM:YAXIS:TO?
- DISplay:MEAS<x>:NAVIgate:TYPE {ALLOCCURRENCES|FAILURES}
- DISplay:MEAS<x>:NAVIgate:TYPE?
- DISplay:PERSistence {OFF|AUTO|INFPersist|INFInite|VARpersist|CLEAR}
- DISplay:PERSistence:RESET
- DISplay:PERSistence?
- DISplay:PLOTView1:AUTOScale {ON|OFF|<NR1>}
- DISplay:PLOTView1:AUTOScale?
- DISplay:PLOTView1:CURSor:ASOUrce?
- DISplay:PLOTView1:CURSor:BSOUrce?
- DISplay:PLOTView1:CURSor:DDT?
- DISplay:PLOTView1:CURSor:FUNCtion {WAVEFORM|VBArs|HBArs|SCREEN}
- DISplay:PLOTView1:CURSor:FUNCtion?
- DISplay:PLOTView1:CURSor:HBArs:APOSition <NR3>
- DISplay:PLOTView1:CURSor:HBArs:APOSition?
- DISplay:PLOTView1:CURSor:HBArs:AUNIts?
- DISplay:PLOTView1:CURSor:HBArs:BPOSition <NR3>
- DISplay:PLOTView1:CURSor:HBArs:BPOSition?
- DISplay:PLOTView1:CURSor:HBArs:BUNIts?
- DISplay:PLOTView1:CURSor:HBArs:DELTa?
- DISplay:PLOTView1:CURSor:MODe {INDEPENDENT|TRACK}
- DISplay:PLOTView1:CURSor:MODe?
- DISplay:PLOTView1:CURSor:ONEOVERDELTATVALUE?
- DISplay:PLOTView1:CURSor:ROLOCATION {GRATICULE|BADGE}
- DISplay:PLOTView1:CURSor:ROLOCATION?
- DISplay:PLOTView1:CURSor:SCREEN:AXPOSition <NR3>
- DISplay:PLOTView1:CURSor:SCREEN:AXPOSition?
- DISplay:PLOTView1:CURSor:SCREEN:AYPOSition <NR3>
- DISplay:PLOTView1:CURSor:SCREEN:AYPOSition?
- DISplay:PLOTView1:CURSor:SCREEN:BXPOSition <NR3>
- DISplay:PLOTView1:CURSor:SCREEN:BXPOSition?
- DISplay:PLOTView1:CURSor:SCREEN:BYPOSition <NR3>
- DISplay:PLOTView1:CURSor:SCREEN:BYPOSition?
- DISplay:PLOTView1:CURSor:SPLITMODE {SAME|SPLIT}
- DISplay:PLOTView1:CURSor:SPLITMODE?
- DISplay:PLOTView1:CURSor:STATE {ON|OFF|<NR1>}
- DISplay:PLOTView1:CURSor:STATE?
- DISplay:PLOTView1:CURSor:VBArs:APOSition <NR3>
- DISplay:PLOTView1:CURSor:VBArs:APOSition?
- DISplay:PLOTView1:CURSor:VBArs:BPOSition <NR3>
- DISplay:PLOTView1:CURSor:VBArs:BPOSition?
- DISplay:PLOTView1:CURSor:VBArs:DELTa?
- DISplay:PLOTView1:CURSor:VBArs:UNIts?
- DISplay:PLOTView1:CURSor:WAVEform:APOSition <NR3>
- DISplay:PLOTView1:CURSor:WAVEform:APOSition?
- DISplay:PLOTView1:CURSor:WAVEform:BPOSition <NR3>
- DISplay:PLOTView1:CURSor:WAVEform:BPOSition?
- DISplay:PLOTView1:GRIDlines {HORizontal|VERTical|BOTH}
- DISplay:PLOTView1:GRIDlines?
- DISplay:PLOTView1:XAXIS:SCALE {LINEAR|LOG}
- DISplay:PLOTView1:YAXIS:SCALE {LINEAR|LOG}
- DISplay:PLOTView1:ZOOM:XAXIS:FROM <NR3>
- DISplay:PLOTView1:ZOOM:XAXIS:FROM?
- DISplay:PLOTView1:ZOOM:XAXIS:TO <NR3>
- DISplay:PLOTView1:ZOOM:XAXIS:TO?
- DISplay:PLOTView1:ZOOM:YAXIS:FROM <NR3>
- DISplay:PLOTView1:ZOOM:YAXIS:FROM?
- DISplay:PLOTView1:ZOOM:YAXIS:TO <NR3>
- DISplay:PLOTView1:ZOOM:YAXIS:TO?
- DISplay:REF<x>:INVERTColor COLOR<x>
- DISplay:REF<x>:INVERTColor?
- DISplay:REF<x>:NORMALColor COLOR<x>
- DISplay:REF<x>:NORMALColor?
- DISplay:REFFFTView<x>:AUTOScale {ON|OFF|1|0}
- DISplay:REFFFTView<x>:AUTOScale?
- DISplay:REFFFTView<x>:CURSor:ASOUrce?
- DISplay:REFFFTView<x>:CURSor:BSOUrce?
- DISplay:REFFFTView<x>:CURSor:DDT?
- DISplay:REFFFTView<x>:CURSor:FUNCtion {WAVEform|VBArs|HBArs|SCREEN}
- DISplay:REFFFTView<x>:CURSor:FUNCtion?
- DISplay:REFFFTView<x>:CURSor:HBArs:APOSition <NR3>
- DISplay:REFFFTView<x>:CURSor:HBArs:APOSition?
- DISplay:REFFFTView<x>:CURSor:HBArs:AUNIts?
- DISplay:REFFFTView<x>:CURSor:HBArs:BPOSition <NR3>
- DISplay:REFFFTView<x>:CURSor:HBArs:BPOSition?
- DISplay:REFFFTView<x>:CURSor:HBArs:BUNIts?
- DISplay:REFFFTView<x>:CURSor:HBArs:DELTa?
- DISplay:REFFFTView<x>:CURSor:MODe {INDEPENDENT|TRACK}
- DISplay:REFFFTView<x>:CURSor:MODe?
- DISplay:REFFFTView<x>:CURSor:ONEOVERDELTATVALUE?
- DISplay:REFFFTView<x>:CURSor:ROLOCATION {GRATICULE|BADGE}
- DISplay:REFFFTView<x>:CURSor:ROLOCATION?
- DISplay:REFFFTView<x>:CURSor:SCREEN:AXPOSition <NR3>
- DISplay:REFFFTView<x>:CURSor:SCREEN:AXPOSition?
- DISplay:REFFFTView<x>:CURSor:SCREEN:AYPOSition <NR3>
- DISplay:REFFFTView<x>:CURSor:SCREEN:AYPOSition?
- DISplay:REFFFTView<x>:CURSor:SCREEN:BXPOSition <NR3>
- DISplay:REFFFTView<x>:CURSor:SCREEN:BXPOSition?
- DISplay:REFFFTView<x>:CURSor:SCREEN:BYPOSition <NR3>
- DISplay:REFFFTView<x>:CURSor:SCREEN:BYPOSition?
- DISplay:REFFFTView<x>:CURSor:SPLITMODE {SAME|SPLIT}
- DISplay:REFFFTView<x>:CURSor:SPLITMODE?
- DISplay:REFFFTView<x>:CURSor:STATE {ON|OFF|1|0}
- DISplay:REFFFTView<x>:CURSor:STATE?
- DISplay:REFFFTView<x>:CURSor:VBArs:APOSition <NR3>
- DISplay:REFFFTView<x>:CURSor:VBArs:APOSition?
- DISplay:REFFFTView<x>:CURSor:VBArs:BPOSition <NR3>
- DISplay:REFFFTView<x>:CURSor:VBArs:BPOSition?
- DISplay:REFFFTView<x>:CURSor:VBArs:DELTa?
- DISplay:REFFFTView<x>:CURSor:VBArs:UNIts?
- DISplay:REFFFTView<x>:CURSor:WAVEform:AHPOSition?
- DISplay:REFFFTView<x>:CURSor:WAVEform:APOSition <NR3>
- DISplay:REFFFTView<x>:CURSor:WAVEform:APOSition?
- DISplay:REFFFTView<x>:CURSor:WAVEform:AVPOSition?
- DISplay:REFFFTView<x>:CURSor:WAVEform:BHPOSition?
- DISplay:REFFFTView<x>:CURSor:WAVEform:BPOSition <NR3>
- DISplay:REFFFTView<x>:CURSor:WAVEform:BPOSition?
- DISplay:REFFFTView<x>:CURSor:WAVEform:BVPOSition?
- DISplay:REFFFTView<x>:GRIDlines {HORizontal|VERTical|BOTH}
- DISplay:REFFFTView<x>:GRIDlines?
- DISplay:REFFFTView<x>:REF:REF<x>:STATE {ON|OFF|1|0}
- DISplay:REFFFTView<x>:REF:REF<x>:STATE?
- DISplay:REFFFTView<x>:XAXIS:SCALE {LINEAr|LOG}
- DISplay:REFFFTView<x>:XAXIS:SCALE?
- DISplay:REFFFTView<x>:ZOOM:XAXIS:FROM <NR3>
- DISplay:REFFFTView<x>:ZOOM:XAXIS:FROM?
- DISplay:REFFFTView<x>:ZOOM:XAXIS:TO <NR3>
- DISplay:REFFFTView<x>:ZOOM:XAXIS:TO?
- DISplay:REFFFTView<x>:ZOOM:YAXIS:FROM <NR3>
- DISplay:REFFFTView<x>:ZOOM:YAXIS:FROM?
- DISplay:REFFFTView<x>:ZOOM:YAXIS:TO <NR3>
- DISplay:REFFFTView<x>:ZOOM:YAXIS:TO?
- DISplay:SELect:BUS BUS<x>
- DISplay:SELect:BUS?
- DISplay:SELect:MATH MATH<x>
- DISplay:SELect:MATH?
- DISplay:SELect:REFerence {NONE|REF<x>}
- DISplay:SELect:SOUrce {NONE|CH<x>|BUS<x>|MATH<x>|PLOT<x>|REF<x>}
- DISplay:SELect:SOUrce?
- DISplay:SELect:SPECView1:SOUrce {CH<x>}
- DISplay:SELect:SPECView1:SOUrce?
- DISplay:SELect:VIEW {WAVEVIEW1|MATHFFT<x>|PLOTVIEW<x>|REFFFT<x>}
- DISplay:SELect:WAVEView1:SOUrce {CH<x>|MATH<x>|BUS<x>|REF<x>|PLOT<x>}
- DISplay:SPECView1:CH<x>:VERTical:POSition <NR3>
- DISplay:SPECView1:CH<x>:VERTical:POSition?
- DISplay:SPECView1:CH<x>:VERTical:SCAle <NR3>
- DISplay:SPECView1:CH<x>:VERTical:SCAle?
- DISplay:SPECView1:CURSor:CURSOR:ANOISEDensity?
- DISplay:SPECView1:CURSor:CURSOR:ASOUrce {AUTO|CH<x>}
- DISplay:SPECView1:CURSor:CURSOR:ASOUrce?
- DISplay:SPECView1:CURSor:CURSOR:BNOISE?
- DISplay:SPECView1:CURSor:CURSOR:BSOUrce {AUTO|CH<x>}
- DISplay:SPECView1:CURSor:CURSOR:BSOUrce?
- DISplay:SPECView1:CURSor:CURSOR:HBArs:APOSition?
- DISplay:SPECView1:CURSor:CURSOR:HBArs:AUNIts?
- DISplay:SPECView1:CURSor:CURSOR:HBArs:BPOSition?
- DISplay:SPECView1:CURSor:CURSOR:HBArs:BUNIts?
- DISplay:SPECView1:CURSor:CURSOR:READout {ABSOLUTE|DELTA}
- DISplay:SPECView1:CURSor:CURSOR:READout?
- DISplay:SPECView1:CURSor:CURSOR:SPLITMODE {SAME|SPLIT}
- DISplay:SPECView1:CURSor:CURSOR:SPLITMODE?
- DISplay:SPECView1:CURSor:CURSOR:STATE {ON|OFF}
- DISplay:SPECView1:CURSor:CURSOR:STATE?
- DISplay:SPECView1:CURSor:CURSOR:VBArs:APOSition <NR3>
- DISplay:SPECView1:CURSor:CURSOR:VBArs:APOSition?
- DISplay:SPECView1:CURSor:CURSOR:VBArs:BPOSition <NR3>
- DISplay:SPECView1:CURSor:CURSOR:VBArs:BPOSition?
- DISplay:SPECView1:CURSor:CURSOR:VBArs:UNIts?
- DISplay:SPECView1:CURSor:CURSOR:WAVEform:APOSition <NR3>
- DISplay:SPECView1:CURSor:CURSOR:WAVEform:APOSition?
- DISplay:SPECView1:CURSor:CURSOR:WAVEform:BPOSition <NR3>
- DISplay:SPECView1:CURSor:CURSOR:WAVEform:BPOSition?
- DISplay:SPECView1:GRAticule {GRId|TIMe|FULl|NONe}
- DISplay:SPECView1:GRAticule?
- DISplay:SPECView1:HORZ {LOG|LINEAr}
- DISplay:SPECView1:HORZ?
- DISplay:SPECView1:INTENSITy:GRATicule <NR2>
- DISplay:SPECView1:INTENSITy:GRATicule?
- DISplay:SPECView1:INTENSITy:WAVEform <NR2>
- DISplay:SPECView1:INTENSITy:WAVEform?
- DISplay:SPECView1:VIEWStyle {OVErlay|STAcked}
- DISplay:SPECView1:VIEWStyle?
- DISplay:VARpersist <NR3>
- DISplay:VARpersist?
- DISplay:WAVEView1:BUS:B<x>:STATE {ON|OFF|1|0}
- DISplay:WAVEView1:BUS:B<x>:STATE?
- DISplay:WAVEView1:BUS:B<x>:VERTical:POSition <NR3>
- DISplay:WAVEView1:BUS:B<x>:VERTical:POSition?
- DISplay:WAVEView1:CH<x>:STATE {ON|OFF|<NR1>}
- DISplay:WAVEView1:CH<x>:STATE?
- DISplay:WAVEView1:CH<x>:VERTical:POSition <NR3>
- DISplay:WAVEView1:CH<x>:VERTical:POSition?
- DISplay:WAVEView1:CH<x>:VERTical:SCAle <NR3>
- DISplay:WAVEView1:CH<x>:VERTical:SCAle?
- DISplay:WAVEView1:CH<x>_D<x>:STATE {ON|OFF|<NR1>}
- DISplay:WAVEView1:CH<x>_D<x>:STATE?
- DISplay:WAVEView1:CH<x>_DALL:STATE {ON|OFF|<NR1>}
- DISplay:WAVEView1:CH<x>_DALL:STATE?
- DISplay:WAVEView1:CH<x>_DALL:VERTical:POSition <NR3>
- DISplay:WAVEView1:CH<x>_DALL:VERTical:POSition?
- DISplay:WAVEView1:CURSor:CURSOR1:ASOUrce {AUTO|CH<x>|BUS<x>|MATH<x>|REF<x>|PLOT<x>}
- DISplay:WAVEView1:CURSor:CURSOR1:ASOUrce?
- DISplay:WAVEView1:CURSor:CURSOR1:BSOUrce {CH<x>|BUS<x>|MATH<x>|REF<x>|PLOT<x>}
- DISplay:WAVEView1:CURSor:CURSOR1:BSOUrce?
- DISplay:WAVEView1:CURSor:CURSOR1:DDT?
- DISplay:WAVEView1:CURSor:CURSOR1:FUNCtion {SCREEN|WAVEFORM|VBArs|HBArs}
- DISplay:WAVEView1:CURSor:CURSOR1:FUNCtion?
- DISplay:WAVEView1:CURSor:CURSOR1:HBArs:APOSition <NR3>
- DISplay:WAVEView1:CURSor:CURSOR1:HBArs:APOSition?
- DISplay:WAVEView1:CURSor:CURSOR1:HBArs:AUNIts?
- DISplay:WAVEView1:CURSor:CURSOR1:HBArs:BPOSition <NR3>
- DISplay:WAVEView1:CURSor:CURSOR1:HBArs:BPOSition?
- DISplay:WAVEView1:CURSor:CURSOR1:HBArs:BUNIts?
- DISplay:WAVEView1:CURSor:CURSOR1:HBArs:DELTa?
- DISplay:WAVEView1:CURSor:CURSOR1:MODe {INDEPENDENT|TRACK}
- DISplay:WAVEView1:CURSor:CURSOR1:ONEOVERDELTATVALUE?
- DISplay:WAVEView1:CURSor:CURSOR1:SCREEN:AXPOSition <NR3>
- DISplay:WAVEView1:CURSor:CURSOR1:SCREEN:AXPOSition?
- DISplay:WAVEView1:CURSor:CURSOR1:SCREEN:AYPOSition <NR3>
- DISplay:WAVEView1:CURSor:CURSOR1:SCREEN:AYPOSition?
- DISplay:WAVEView1:CURSor:CURSOR1:SCREEN:BXPOSition <NR3>
- DISplay:WAVEView1:CURSor:CURSOR1:SCREEN:BXPOSition?
- DISplay:WAVEView1:CURSor:CURSOR1:SCREEN:BYPOSition <NR3>
- DISplay:WAVEView1:CURSor:CURSOR1:SCREEN:BYPOSition?
- DISplay:WAVEView1:CURSor:CURSOR1:SPLITMODE {SAME|SPLIT}
- DISplay:WAVEView1:CURSor:CURSOR1:SPLITMODE?
- DISplay:WAVEView1:CURSor:CURSOR1:STATE {ON|OFF|<NR1>}
- DISplay:WAVEView1:CURSor:CURSOR1:STATE?
- DISplay:WAVEView1:CURSor:CURSOR1:VBArs:APOSition <NR3>
- DISplay:WAVEView1:CURSor:CURSOR1:VBArs:APOSition?
- DISplay:WAVEView1:CURSor:CURSOR1:VBArs:BPOSition <NR3>
- DISplay:WAVEView1:CURSor:CURSOR1:VBArs:BPOSition?
- DISplay:WAVEView1:CURSor:CURSOR1:VBArs:DELTa?
- DISplay:WAVEView1:CURSor:CURSOR1:VBArs:UNIts?
- DISplay:WAVEView1:CURSor:CURSOR1:WAVEform:APOSition <NR3>
- DISplay:WAVEView1:CURSor:CURSOR1:WAVEform:APOSition?
- DISplay:WAVEView1:CURSor:CURSOR1:WAVEform:BPOSition <NR3>
- DISplay:WAVEView1:CURSor:CURSOR1:WAVEform:BPOSition?
- DISplay:WAVEView1:CURSor:CURSOR1?
- DISplay:WAVEView1:CURSor:CURSOR:WAVEform:ALL:Values?
- DISplay:WAVEView1:CURSor:CURSOR:WAVEform:AVPOSition?
- DISplay:WAVEView1:CURSor:CURSOR:WAVEform:BVPOSition?
- DISplay:WAVEView1:CURSor?
- DISplay:WAVEView1:FILTer {SINX|LINear}
- DISplay:WAVEView1:GRAticule {GRId|TIMe|FULl|NONe}
- DISplay:WAVEView1:GRAticule?
- DISplay:WAVEView1:INTENSITy:GRATicule <NR2>
- DISplay:WAVEView1:INTENSITy:GRATicule?
- DISplay:WAVEView1:INTENSITy:WAVEform <NR2>
- DISplay:WAVEView1:INTENSITy:WAVEform?
- DISplay:WAVEView1:MATH:MATH<x>:AUTOScale {ON|OFF|<NR1>}
- DISplay:WAVEView1:MATH:MATH<x>:AUTOScale?
- DISplay:WAVEView1:MATH:MATH<x>:STATE {ON|OFF|<NR1>}
- DISplay:WAVEView1:MATH:MATH<x>:STATE?
- DISplay:WAVEView1:MATH:MATH<x>:VERTical:POSition <NR3>
- DISplay:WAVEView1:MATH:MATH<x>:VERTical:POSition?
- DISplay:WAVEView1:MATH:MATH<x>:VERTical:SCAle <NR3>
- DISplay:WAVEView1:MATH:MATH<x>:VERTical:SCAle?
- DISplay:WAVEView1:PLOT:PLOT<x>:AUTOScale {ON|OFF|<NR1>}
- DISplay:WAVEView1:PLOT:PLOT<x>:AUTOScale?
- DISplay:WAVEView1:PLOT:PLOT<x>:STATE {ON|OFF|<NR1>}
- DISplay:WAVEView1:PLOT:PLOT<x>:STATE?
- DISplay:WAVEView1:PLOT:PLOT<x>:VERTical:POSition <NR3>
- DISplay:WAVEView1:PLOT:PLOT<x>:VERTical:POSition?
- DISplay:WAVEView1:PLOT:PLOT<x>:VERTical:SCAle <NR3>
- DISplay:WAVEView1:PLOT:PLOT<x>:VERTical:SCAle?
- DISplay:WAVEView1:REF:REF<x>:FRAMe <NR1>
- DISplay:WAVEView1:REF:REF<x>:FRAMe?
- DISplay:WAVEView1:REF:REF<x>:STATE {ON|OFF|<NR1>}
- DISplay:WAVEView1:REF:REF<x>:STATE?
- DISplay:WAVEView1:REF:REF<x>:VERTical:POSition <NR3>
- DISplay:WAVEView1:REF:REF<x>:VERTical:POSition?
- DISplay:WAVEView1:REF:REF<x>:VERTical:SCAle <NR3>
- DISplay:WAVEView1:REF:REF<x>:VERTical:SCAle?
- DISplay:WAVEView1:REF<x>_DALL:FRAMe <NR1>
- DISplay:WAVEView1:REF<x>_DALL:FRAMe?
- DISplay:WAVEView1:RF_FREQuency<x>:VERTical:POSition <NR3>
- DISplay:WAVEView1:RF_FREQuency<x>:VERTical:POSition?
- DISplay:WAVEView1:RF_FREQuency<x>:VERTical:SCAle <NR3>
- DISplay:WAVEView1:RF_FREQuency<x>:VERTical:SCAle?
- DISplay:WAVEView1:RF_MAGnitude<x>:VERTical:POSition <NR3>
- DISplay:WAVEView1:RF_MAGnitude<x>:VERTical:POSition?
- DISplay:WAVEView1:RF_MAGnitude<x>:VERTical:SCAle <NR3>
- DISplay:WAVEView1:RF_MAGnitude<x>:VERTical:SCAle?
- DISplay:WAVEView1:RF_PHASe<x>:VERTical:POSition <NR3>
- DISplay:WAVEView1:RF_PHASe<x>:VERTical:POSition?
- DISplay:WAVEView1:RF_PHASe<x>:VERTical:SCAle <NR3>
- DISplay:WAVEView1:RF_PHASe<x>:VERTical:SCAle?
- DISplay:WAVEView1:STYle {VECtors|DOTsonly}
- DISplay:WAVEView1:STYle?
- DISplay:WAVEView1:VIEWStyle {OVErlay|STAcked}
- DISplay:WAVEView1:VIEWStyle?
- DISplay:WAVEView1:ZOOM:ZOOM1:HORizontal:POSition <NR3>
- DISplay:WAVEView1:ZOOM:ZOOM1:HORizontal:POSition?
- DISplay:WAVEView1:ZOOM:ZOOM1:HORizontal:SCALe <NR3>
- DISplay:WAVEView1:ZOOM:ZOOM1:HORizontal:SCALe?
- DISplay:WAVEView1:ZOOM:ZOOM1:HORizontal:WINSCALe <NR3>
- DISplay:WAVEView1:ZOOM:ZOOM1:HORizontal:WINSCALe?
- DISplay:WAVEView1:ZOOM:ZOOM1:STATe {ON|OFF|<NR1>}
- DISplay:WAVEView1:ZOOM:ZOOM1:STATe?
- DISplay:WAVEView1:ZOOM:ZOOM1:VERTical:POSition <NR3>
- DISplay:WAVEView1:ZOOM:ZOOM1:VERTical:POSition?
- DISplay:WAVEView1:ZOOM:ZOOM1:VERTical:SCALe <NR3>
- DISplay:WAVEView1:ZOOM:ZOOM1:VERTical:SCALe?
- DISplay:WAVEView1:ZOOM:ZOOM1?
- DISplay:WAVEView1:ZOOM?
- DISplay:WAVEView:CURSor:CURSOR1:ROLOCATION {GRATICULE|BADGE}
- DISplay:WAVEView:CURSor:CURSOR1:ROLOCATION?
- DISplay:WAVEView:GRIDTYPE {MOVEABLE|FIXED}
- DISplay:WAVEView:GRIDTYPE?
- DISplay:WAVEform {ON|OFF|<NR1>}
- DISplay:WAVEform?
- DISplay?

Display ¶

Bases: SCPICmdRead

The DISplay command.

Description

This query-only command returns the current Display settings.

Usage

Using the .query() method will send the DISplay? query.
Using the .verify(value) method will send the DISplay? query and raise an AssertionError if the returned value does not match value.

SCPI Syntax

- DISplay?

Properties

.colors: The DISplay:COLors command.
.global: The DISplay:GLObal command tree.
.intensity: The DISplay:INTENSITy command.
.mathfftview1: The DISplay:MATHFFTView1 command tree.
.meas: The DISplay:MEAS<x> command tree.
.persistence: The DISplay:PERSistence command.
.plotview1: The DISplay:PLOTView1 command tree.
.reffftview: The DISplay:REFFFTView<x> command tree.
.select: The DISplay:SELect command tree.
.specview1: The DISplay:SPECView1 command tree.
.varpersist: The DISplay:VARpersist command.
.waveview: The DISplay:WAVEView command tree.
.waveview1: The DISplay:WAVEView1 command tree.
.waveform: The DISplay:WAVEform command.
.ch: The DISplay:CH<x> command tree.
.math: The DISplay:MATH<x> command tree.
.ref: The DISplay:REF<x> command tree.

ch `property` ¶

ch: dict[int, DisplayChannel]

Return the DISplay:CH<x> command tree.

Usage

Using the .query() method will send the DISplay:CH<x>? query.
Using the .verify(value) method will send the DISplay:CH<x>? query and raise an AssertionError if the returned value does not match value.

Info

CH<x> specifies the input channel for which you want to change the waveform color, where is the channel number.

Sub-properties

.invertcolor: The DISplay:CH<x>:INVERTColor command.
.normalcolor: The DISplay:CH<x>:NORMALColor command.

colors `property` ¶

colors: DisplayColors

Return the DISplay:COLors command.

Description

Sets or queries the color mode for the graticule and waveform display.

Usage

Using the .query() method will send the DISplay:COLors? query.
Using the .verify(value) method will send the DISplay:COLors? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:COLors value command.

SCPI Syntax

- DISplay:COLors {NORMal|INVERTed}
- DISplay:COLors?

Info

NORMal specifies normal color mode.
INVERTed specifies inverted color mode.

global_ `property` ¶

global_: DisplayGlobal

Return the DISplay:GLObal command tree.

Usage

Using the .query() method will send the DISplay:GLObal? query.
Using the .verify(value) method will send the DISplay:GLObal? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.b: The DISplay:GLObal:B<x> command tree.
.ch: The DISplay:GLObal:CH<x> command tree.
.math: The DISplay:GLObal:MATH<x> command tree.
.plot: The DISplay:GLObal:PLOT<x> command tree.
.ref: The DISplay:GLObal:REF<x> command tree.

intensity `property` ¶

intensity: DisplayIntensity

Return the DISplay:INTENSITy command.

Description

This query-only command returns the waveform saturation level and screen saver settings.

Usage

Using the .query() method will send the DISplay:INTENSITy? query.
Using the .verify(value) method will send the DISplay:INTENSITy? query and raise an AssertionError if the returned value does not match value.

SCPI Syntax

- DISplay:INTENSITy?

Sub-properties

.backlight: The DISplay:INTENSITy:BACKLight command.

math `property` ¶

math: dict[int, DisplayMathItem]

Return the DISplay:MATH<x> command tree.

Usage

Using the .query() method will send the DISplay:MATH<x>? query.
Using the .verify(value) method will send the DISplay:MATH<x>? query and raise an AssertionError if the returned value does not match value.

Info

MATH<x> specifies the math waveform for which you want to change the waveform color, where is the math waveform number.

Sub-properties

.invertcolor: The DISplay:MATH<x>:INVERTColor command.
.normalcolor: The DISplay:MATH<x>:NORMALColor command.

mathfftview1 `property` ¶

mathfftview1: DisplayMathfftview1

Return the DISplay:MATHFFTView1 command tree.

Usage

Using the .query() method will send the DISplay:MATHFFTView1? query.
Using the .verify(value) method will send the DISplay:MATHFFTView1? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.autoscale: The DISplay:MATHFFTView1:AUTOScale command.
.cursor: The DISplay:MATHFFTView1:CURSor command tree.
.gridlines: The DISplay:MATHFFTView1:GRIDlines command.
.math: The DISplay:MATHFFTView1:MATH command tree.
.xaxis: The DISplay:MATHFFTView1:XAXIS command tree.
.yaxis: The DISplay:MATHFFTView1:YAXIS command tree.
.zoom: The DISplay:MATHFFTView1:ZOOM command tree.

meas `property` ¶

meas: dict[int, DisplayMeasItem]

Return the DISplay:MEAS<x> command tree.

Usage

Using the .query() method will send the DISplay:MEAS<x>? query.
Using the .verify(value) method will send the DISplay:MEAS<x>? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.navigate: The DISplay:MEAS<x>:NAVIgate command tree.

persistence `property` ¶

persistence: DisplayPersistence

Return the DISplay:PERSistence command.

Description

This command sets or queries the display persistence for analog waveforms. Persistence is valid for wave views only.

Usage

Using the .query() method will send the DISplay:PERSistence? query.
Using the .verify(value) method will send the DISplay:PERSistence? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:PERSistence value command.

SCPI Syntax

- DISplay:PERSistence {OFF|AUTO|INFPersist|INFInite|VARpersist|CLEAR}
- DISplay:PERSistence?

Info

OFF disables the persistence aspect of the display.
AUTO automatically set the persistence.
INFPersist sets a display mode where any pixels, once touched by samples, remain set until cleared by a mode change.
INFInite sets a display mode where any pixels, once touched by samples, remain set until cleared by a mode change.
VARpersist sets a display mode where set pixels are gradually dimmed.
CLEAR resets the persist time count down and clears the display of acquired points.

Sub-properties

.reset: The DISplay:PERSistence:RESET command.

plotview1 `property` ¶

plotview1: DisplayPlotview1

Return the DISplay:PLOTView1 command tree.

Usage

Using the .query() method will send the DISplay:PLOTView1? query.
Using the .verify(value) method will send the DISplay:PLOTView1? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.autoscale: The DISplay:PLOTView1:AUTOScale command.
.cursor: The DISplay:PLOTView1:CURSor command tree.
.gridlines: The DISplay:PLOTView1:GRIDlines command.
.xaxis: The DISplay:PLOTView1:XAXIS command tree.
.yaxis: The DISplay:PLOTView1:YAXIS command tree.
.zoom: The DISplay:PLOTView1:ZOOM command tree.

ref `property` ¶

ref: dict[int, DisplayRefItem]

Return the DISplay:REF<x> command tree.

Usage

Using the .query() method will send the DISplay:REF<x>? query.
Using the .verify(value) method will send the DISplay:REF<x>? query and raise an AssertionError if the returned value does not match value.

Info

REF<x> specifies the reference waveform for which you want to change the waveform color, where is the reference waveform number.

Sub-properties

.invertcolor: The DISplay:REF<x>:INVERTColor command.
.normalcolor: The DISplay:REF<x>:NORMALColor command.

reffftview `property` ¶

reffftview: dict[int, DisplayReffftviewItem]

Return the DISplay:REFFFTView<x> command tree.

Usage

Using the .query() method will send the DISplay:REFFFTView<x>? query.
Using the .verify(value) method will send the DISplay:REFFFTView<x>? query and raise an AssertionError if the returned value does not match value.

Info

REFFFTView<x> is the Reference FFT plot number.

Sub-properties

.autoscale: The DISplay:REFFFTView<x>:AUTOScale command.
.cursor: The DISplay:REFFFTView<x>:CURSor command tree.
.gridlines: The DISplay:REFFFTView<x>:GRIDlines command.
.ref: The DISplay:REFFFTView<x>:REF command tree.
.xaxis: The DISplay:REFFFTView<x>:XAXIS command tree.
.zoom: The DISplay:REFFFTView<x>:ZOOM command tree.

select `property` ¶

select: DisplaySelect

Return the DISplay:SELect command tree.

Usage

Using the .query() method will send the DISplay:SELect? query.
Using the .verify(value) method will send the DISplay:SELect? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.bus: The DISplay:SELect:BUS command.
.math: The DISplay:SELect:MATH command.
.reference: The DISplay:SELect:REFerence command.
.source: The DISplay:SELect:SOUrce command.
.specview1: The DISplay:SELect:SPECView1 command tree.
.view: The DISplay:SELect:VIEW command.
.waveview1: The DISplay:SELect:WAVEView1 command tree.

specview1 `property` ¶

specview1: DisplaySpecview1

Return the DISplay:SPECView1 command tree.

Usage

Using the .query() method will send the DISplay:SPECView1? query.
Using the .verify(value) method will send the DISplay:SPECView1? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.ch: The DISplay:SPECView1:CH<x> command tree.
.cursor: The DISplay:SPECView1:CURSor command tree.
.graticule: The DISplay:SPECView1:GRAticule command.
.horz: The DISplay:SPECView1:HORZ command.
.intensity: The DISplay:SPECView1:INTENSITy command tree.
.viewstyle: The DISplay:SPECView1:VIEWStyle command.

varpersist `property` ¶

varpersist: DisplayVarpersist

Return the DISplay:VARpersist command.

Description

This command sets or queries display persistence decay time, which is the approximate decay time for a freshly struck persistence sample.

Usage

Using the .query() method will send the DISplay:VARpersist? query.
Using the .verify(value) method will send the DISplay:VARpersist? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:VARpersist value command.

SCPI Syntax

- DISplay:VARpersist <NR3>
- DISplay:VARpersist?

Info

<NR3> indicates the persistence decay time and ranges from 0.5 to 100.

waveform `property` ¶

waveform: DisplayWaveform

Return the DISplay:WAVEform command.

Description

This command globally enables or disables the waveform display. When disabled, the waveform is still acquired and held in memory, but it is not drawn to the screen. Disabling the waveform display may improve processing speed.

Usage

Using the .query() method will send the DISplay:WAVEform? query.
Using the .verify(value) method will send the DISplay:WAVEform? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:WAVEform value command.

SCPI Syntax

- DISplay:WAVEform {ON|OFF|<NR1>}
- DISplay:WAVEform?

Info

<NR1> enables or disables the waveform display. 0 disables the waveform display; any other value enables the waveform display.
ON enables the waveform display.
OFF disables the waveform display.

waveview `property` ¶

waveview: DisplayWaveview

Return the DISplay:WAVEView command tree.

Usage

Using the .query() method will send the DISplay:WAVEView? query.
Using the .verify(value) method will send the DISplay:WAVEView? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.cursor: The DISplay:WAVEView:CURSor command tree.
.gridtype: The DISplay:WAVEView:GRIDTYPE command.

waveview1 `property` ¶

waveview1: DisplayWaveview1

Return the DISplay:WAVEView1 command tree.

Usage

Using the .query() method will send the DISplay:WAVEView1? query.
Using the .verify(value) method will send the DISplay:WAVEView1? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.bus: The DISplay:WAVEView1:BUS command tree.
.ch: The DISplay:WAVEView1:CH<x> command tree.
.cursor: The DISplay:WAVEView1:CURSor command.
.filter: The DISplay:WAVEView1:FILTer command.
.graticule: The DISplay:WAVEView1:GRAticule command.
.intensity: The DISplay:WAVEView1:INTENSITy command tree.
.math: The DISplay:WAVEView1:MATH command tree.
.plot: The DISplay:WAVEView1:PLOT command tree.
.ref: The DISplay:WAVEView1:REF command tree.
.refx: The DISplay:WAVEView1:REF<x> command tree.
.rf_frequency: The DISplay:WAVEView1:RF_FREQuency<x> command tree.
.rf_magnitude: The DISplay:WAVEView1:RF_MAGnitude<x> command tree.
.rf_phase: The DISplay:WAVEView1:RF_PHASe<x> command tree.
.style: The DISplay:WAVEView1:STYle command.
.viewstyle: The DISplay:WAVEView1:VIEWStyle command.
.zoom: The DISplay:WAVEView1:ZOOM command.

DisplayChannel ¶

Bases: ValidatedChannel, SCPICmdRead

The DISplay:CH<x> command tree.

Usage

Using the .query() method will send the DISplay:CH<x>? query.
Using the .verify(value) method will send the DISplay:CH<x>? query and raise an AssertionError if the returned value does not match value.

Info

CH<x> specifies the input channel for which you want to change the waveform color, where is the channel number.

Properties

.invertcolor: The DISplay:CH<x>:INVERTColor command.
.normalcolor: The DISplay:CH<x>:NORMALColor command.

invertcolor `property` ¶

invertcolor: DisplayChannelInvertcolor

Return the DISplay:CH<x>:INVERTColor command.

Description

This command sets or queries the Inverted mode color of the specified input source to the specified color. You can assign one of 48 unique colors to any channel, math, or reference waveform. These colors replace the default Inverted colors and remain in effect until you reset the colors.

Usage

Using the .query() method will send the DISplay:CH<x>:INVERTColor? query.
Using the .verify(value) method will send the DISplay:CH<x>:INVERTColor? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:CH<x>:INVERTColor value command.

SCPI Syntax

- DISplay:CH<x>:INVERTColor COLOR<x>
- DISplay:CH<x>:INVERTColor?

Info

CH<x> specifies the input channel for which you want to change the waveform color, where is the channel number.
COLOR<x> specifies the color to assign to the specified waveform, where = 0 to 47.

normalcolor `property` ¶

normalcolor: DisplayChannelNormalcolor

Return the DISplay:CH<x>:NORMALColor command.

Description

This command sets or queries the normal mode color of the specified input source to the specified color. You can assign one of 48 unique colors to any channel, math, or reference waveform. These colors replace the default normal colors and remain in effect until you reset the colors.

Usage

Using the .query() method will send the DISplay:CH<x>:NORMALColor? query.
Using the .verify(value) method will send the DISplay:CH<x>:NORMALColor? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:CH<x>:NORMALColor value command.

SCPI Syntax

- DISplay:CH<x>:NORMALColor COLOR<x>
- DISplay:CH<x>:NORMALColor?

Info

CH<x> specifies the input channel for which you want to change the waveform color, where is the channel number.
COLOR<x> specifies the color to assign to the specified waveform, where = 0 to 47.

DisplayChannelInvertcolor ¶

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:CH<x>:INVERTColor command.

Description

This command sets or queries the Inverted mode color of the specified input source to the specified color. You can assign one of 48 unique colors to any channel, math, or reference waveform. These colors replace the default Inverted colors and remain in effect until you reset the colors.

Usage

Using the .query() method will send the DISplay:CH<x>:INVERTColor? query.
Using the .verify(value) method will send the DISplay:CH<x>:INVERTColor? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:CH<x>:INVERTColor value command.

SCPI Syntax

- DISplay:CH<x>:INVERTColor COLOR<x>
- DISplay:CH<x>:INVERTColor?

Info

CH<x> specifies the input channel for which you want to change the waveform color, where is the channel number.
COLOR<x> specifies the color to assign to the specified waveform, where = 0 to 47.

DisplayChannelNormalcolor ¶

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:CH<x>:NORMALColor command.

Description

This command sets or queries the normal mode color of the specified input source to the specified color. You can assign one of 48 unique colors to any channel, math, or reference waveform. These colors replace the default normal colors and remain in effect until you reset the colors.

Usage

Using the .query() method will send the DISplay:CH<x>:NORMALColor? query.
Using the .verify(value) method will send the DISplay:CH<x>:NORMALColor? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:CH<x>:NORMALColor value command.

SCPI Syntax

- DISplay:CH<x>:NORMALColor COLOR<x>
- DISplay:CH<x>:NORMALColor?

Info

CH<x> specifies the input channel for which you want to change the waveform color, where is the channel number.
COLOR<x> specifies the color to assign to the specified waveform, where = 0 to 47.

DisplayColors ¶

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:COLors command.

Description

Sets or queries the color mode for the graticule and waveform display.

Usage

Using the .query() method will send the DISplay:COLors? query.
Using the .verify(value) method will send the DISplay:COLors? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:COLors value command.

SCPI Syntax

- DISplay:COLors {NORMal|INVERTed}
- DISplay:COLors?

Info

NORMal specifies normal color mode.
INVERTed specifies inverted color mode.

DisplayGlobal ¶

Bases: SCPICmdRead

The DISplay:GLObal command tree.

Usage

Using the .query() method will send the DISplay:GLObal? query.
Using the .verify(value) method will send the DISplay:GLObal? query and raise an AssertionError if the returned value does not match value.

Properties

.b: The DISplay:GLObal:B<x> command tree.
.ch: The DISplay:GLObal:CH<x> command tree.
.math: The DISplay:GLObal:MATH<x> command tree.
.plot: The DISplay:GLObal:PLOT<x> command tree.
.ref: The DISplay:GLObal:REF<x> command tree.

b `property` ¶

b: dict[int, DisplayGlobalBItem]

Return the DISplay:GLObal:B<x> command tree.

Usage

Using the .query() method will send the DISplay:GLObal:B<x>? query.
Using the .verify(value) method will send the DISplay:GLObal:B<x>? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.state: The DISplay:GLObal:B<x>:STATE command.

ch `property` ¶

ch: dict[int, DisplayGlobalChannel]

Return the DISplay:GLObal:CH<x> command tree.

Usage

Using the .query() method will send the DISplay:GLObal:CH<x>? query.
Using the .verify(value) method will send the DISplay:GLObal:CH<x>? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.state: The DISplay:GLObal:CH<x>:STATE command.

math `property` ¶

math: dict[int, DisplayGlobalMathItem]

Return the DISplay:GLObal:MATH<x> command tree.

Usage

Using the .query() method will send the DISplay:GLObal:MATH<x>? query.
Using the .verify(value) method will send the DISplay:GLObal:MATH<x>? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.state: The DISplay:GLObal:MATH<x>:STATE command.

plot `property` ¶

plot: dict[int, DisplayGlobalPlotItem]

Return the DISplay:GLObal:PLOT<x> command tree.

Usage

Using the .query() method will send the DISplay:GLObal:PLOT<x>? query.
Using the .verify(value) method will send the DISplay:GLObal:PLOT<x>? query and raise an AssertionError if the returned value does not match value.

Info

PLOT<x> is the plot number.

Sub-properties

.state: The DISplay:GLObal:PLOT<x>:STATE command.

ref `property` ¶

ref: dict[int, DisplayGlobalRefItem]

Return the DISplay:GLObal:REF<x> command tree.

Usage

Using the .query() method will send the DISplay:GLObal:REF<x>? query.
Using the .verify(value) method will send the DISplay:GLObal:REF<x>? query and raise an AssertionError if the returned value does not match value.

Info

REF<x> is the Reference waveform number.

Sub-properties

.state: The DISplay:GLObal:REF<x>:STATE command.

DisplayGlobalBItem ¶

Bases: ValidatedDynamicNumberCmd, SCPICmdRead

The DISplay:GLObal:B<x> command tree.

Usage

Using the .query() method will send the DISplay:GLObal:B<x>? query.
Using the .verify(value) method will send the DISplay:GLObal:B<x>? query and raise an AssertionError if the returned value does not match value.

Properties

.state: The DISplay:GLObal:B<x>:STATE command.

state `property` ¶

state: DisplayGlobalBItemState

Return the DISplay:GLObal:B<x>:STATE command.

Description

This command sets or queries the global state (display mode On or Off) of the specified bus. Setting this value true (On or NR1 ≠ 0 ) turns on the source in the waveform view. Setting this value false (Off or NR1 = 0 ) turns off the source in the waveform view. This command only works if the specified bus is added already.

Usage

Using the .query() method will send the DISplay:GLObal:B<x>:STATE? query.
Using the .verify(value) method will send the DISplay:GLObal:B<x>:STATE? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:GLObal:B<x>:STATE value command.

SCPI Syntax

- DISplay:GLObal:B<x>:STATE {ON|OFF|<NR1>}
- DISplay:GLObal:B<x>:STATE?

Info

<NR1> = 0 disables the display of the specified bus; any other value enables display of the bus.
ON enables display of the specified bus.
OFF disables display of the specified bus.

DisplayGlobalBItemState ¶

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:GLObal:B<x>:STATE command.

Description

This command sets or queries the global state (display mode On or Off) of the specified bus. Setting this value true (On or NR1 ≠ 0 ) turns on the source in the waveform view. Setting this value false (Off or NR1 = 0 ) turns off the source in the waveform view. This command only works if the specified bus is added already.

Usage

Using the .query() method will send the DISplay:GLObal:B<x>:STATE? query.
Using the .verify(value) method will send the DISplay:GLObal:B<x>:STATE? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:GLObal:B<x>:STATE value command.

SCPI Syntax

- DISplay:GLObal:B<x>:STATE {ON|OFF|<NR1>}
- DISplay:GLObal:B<x>:STATE?

Info

<NR1> = 0 disables the display of the specified bus; any other value enables display of the bus.
ON enables display of the specified bus.
OFF disables display of the specified bus.

DisplayGlobalChannel ¶

Bases: ValidatedChannel, SCPICmdRead

The DISplay:GLObal:CH<x> command tree.

Usage

Using the .query() method will send the DISplay:GLObal:CH<x>? query.
Using the .verify(value) method will send the DISplay:GLObal:CH<x>? query and raise an AssertionError if the returned value does not match value.

Properties

.state: The DISplay:GLObal:CH<x>:STATE command.

state `property` ¶

state: DisplayGlobalChannelState

Return the DISplay:GLObal:CH<x>:STATE command.

Description

This command sets or queries the global state (display mode On or Off) of the specified channel (both analog and digital). Setting this value true (On or NR1 ≠ 0 ) turns on the source in the waveform view. Setting this value false (Off or NR1 = 0 ) turns off the source in the waveform view. This command only works if the specified channel is added already.

Usage

Using the .query() method will send the DISplay:GLObal:CH<x>:STATE? query.
Using the .verify(value) method will send the DISplay:GLObal:CH<x>:STATE? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:GLObal:CH<x>:STATE value command.

SCPI Syntax

- DISplay:GLObal:CH<x>:STATE {ON|OFF|<NR1>}
- DISplay:GLObal:CH<x>:STATE?

Info

<NR1> = 0 disables the display of the specified bus; any other value enables display of the channel.
ON enables display of the specified channel.
OFF disables display of the specified channel.

DisplayGlobalChannelState ¶

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:GLObal:CH<x>:STATE command.

Description

This command sets or queries the global state (display mode On or Off) of the specified channel (both analog and digital). Setting this value true (On or NR1 ≠ 0 ) turns on the source in the waveform view. Setting this value false (Off or NR1 = 0 ) turns off the source in the waveform view. This command only works if the specified channel is added already.

Usage

Using the .query() method will send the DISplay:GLObal:CH<x>:STATE? query.
Using the .verify(value) method will send the DISplay:GLObal:CH<x>:STATE? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:GLObal:CH<x>:STATE value command.

SCPI Syntax

- DISplay:GLObal:CH<x>:STATE {ON|OFF|<NR1>}
- DISplay:GLObal:CH<x>:STATE?

Info

<NR1> = 0 disables the display of the specified bus; any other value enables display of the channel.
ON enables display of the specified channel.
OFF disables display of the specified channel.

DisplayGlobalMathItem ¶

Bases: ValidatedDynamicNumberCmd, SCPICmdRead

The DISplay:GLObal:MATH<x> command tree.

Usage

Using the .query() method will send the DISplay:GLObal:MATH<x>? query.
Using the .verify(value) method will send the DISplay:GLObal:MATH<x>? query and raise an AssertionError if the returned value does not match value.

Properties

.state: The DISplay:GLObal:MATH<x>:STATE command.

state `property` ¶

state: DisplayGlobalMathItemState

Return the DISplay:GLObal:MATH<x>:STATE command.

Description

This command sets or queries the global state (display mode On or Off) of the specified math. Setting this value true (On or NR1 ≠ 0) turns on the source in the waveform view. Setting this value false (Off or NR1 = 0) turns off the source in the waveform view. This command only works if the specified math waveform is added already.

Usage

Using the .query() method will send the DISplay:GLObal:MATH<x>:STATE? query.
Using the .verify(value) method will send the DISplay:GLObal:MATH<x>:STATE? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:GLObal:MATH<x>:STATE value command.

SCPI Syntax

- DISplay:GLObal:MATH<x>:STATE {ON|OFF|<NR1>}
- DISplay:GLObal:MATH<x>:STATE?

Info

<NR1> = 0 disables the display of the specified math; any other value enables display of the math.
ON enables display of the specified math.
OFF disables display of the specified math.

DisplayGlobalMathItemState ¶

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:GLObal:MATH<x>:STATE command.

Description

This command sets or queries the global state (display mode On or Off) of the specified math. Setting this value true (On or NR1 ≠ 0) turns on the source in the waveform view. Setting this value false (Off or NR1 = 0) turns off the source in the waveform view. This command only works if the specified math waveform is added already.

Usage

Using the .query() method will send the DISplay:GLObal:MATH<x>:STATE? query.
Using the .verify(value) method will send the DISplay:GLObal:MATH<x>:STATE? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:GLObal:MATH<x>:STATE value command.

SCPI Syntax

- DISplay:GLObal:MATH<x>:STATE {ON|OFF|<NR1>}
- DISplay:GLObal:MATH<x>:STATE?

Info

<NR1> = 0 disables the display of the specified math; any other value enables display of the math.
ON enables display of the specified math.
OFF disables display of the specified math.

DisplayGlobalPlotItem ¶

Bases: ValidatedDynamicNumberCmd, SCPICmdRead

The DISplay:GLObal:PLOT<x> command tree.

Usage

Using the .query() method will send the DISplay:GLObal:PLOT<x>? query.
Using the .verify(value) method will send the DISplay:GLObal:PLOT<x>? query and raise an AssertionError if the returned value does not match value.

Info

PLOT<x> is the plot number.

Properties

.state: The DISplay:GLObal:PLOT<x>:STATE command.

state `property` ¶

state: DisplayGlobalPlotItemState

Return the DISplay:GLObal:PLOT<x>:STATE command.

Description

This command sets or queries the global state (display mode On or Off) of the specified time trend plot. Setting this value true (On or NR1 ≠ 0) turns on the source in the waveform view. Setting this value false (Off or NR1 = 0) turns off the source in the waveform view. This command only works if the specified plot is added already.

Usage

Using the .query() method will send the DISplay:GLObal:PLOT<x>:STATE? query.
Using the .verify(value) method will send the DISplay:GLObal:PLOT<x>:STATE? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:GLObal:PLOT<x>:STATE value command.

SCPI Syntax

- DISplay:GLObal:PLOT<x>:STATE {ON|OFF|<NR1>}
- DISplay:GLObal:PLOT<x>:STATE?

Info

PLOT<x> is the plot number.
<NR1> = 0 disables the display of the specified plot; any other value enables display of the plot.
ON enables display of the specified plot.
OFF disables display of the specified plot.

DisplayGlobalPlotItemState ¶

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:GLObal:PLOT<x>:STATE command.

Description

This command sets or queries the global state (display mode On or Off) of the specified time trend plot. Setting this value true (On or NR1 ≠ 0) turns on the source in the waveform view. Setting this value false (Off or NR1 = 0) turns off the source in the waveform view. This command only works if the specified plot is added already.

Usage

Using the .query() method will send the DISplay:GLObal:PLOT<x>:STATE? query.
Using the .verify(value) method will send the DISplay:GLObal:PLOT<x>:STATE? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:GLObal:PLOT<x>:STATE value command.

SCPI Syntax

- DISplay:GLObal:PLOT<x>:STATE {ON|OFF|<NR1>}
- DISplay:GLObal:PLOT<x>:STATE?

Info

PLOT<x> is the plot number.
<NR1> = 0 disables the display of the specified plot; any other value enables display of the plot.
ON enables display of the specified plot.
OFF disables display of the specified plot.

DisplayGlobalRefItem ¶

Bases: ValidatedDynamicNumberCmd, SCPICmdRead

The DISplay:GLObal:REF<x> command tree.

Usage

Using the .query() method will send the DISplay:GLObal:REF<x>? query.
Using the .verify(value) method will send the DISplay:GLObal:REF<x>? query and raise an AssertionError if the returned value does not match value.

Info

REF<x> is the Reference waveform number.

Properties

.state: The DISplay:GLObal:REF<x>:STATE command.

state `property` ¶

state: DisplayGlobalRefItemState

Return the DISplay:GLObal:REF<x>:STATE command.

Description

This command sets or queries the global state (display mode On or Off) of the specified reference waveform. Setting this value true (On or NR1 ≠ 0) turns on the source in the waveform view. Setting this value false (Off or NR1 = 0) turns off the source in the waveform view. This command only works if the specified reference waveform is added already.

Usage

Using the .query() method will send the DISplay:GLObal:REF<x>:STATE? query.
Using the .verify(value) method will send the DISplay:GLObal:REF<x>:STATE? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:GLObal:REF<x>:STATE value command.

SCPI Syntax

- DISplay:GLObal:REF<x>:STATE {ON|OFF|<NR1>}
- DISplay:GLObal:REF<x>:STATE?

Info

REF<x> is the Reference waveform number.
<NR1> = 0 disables the display of the specified reference; any other value enables display of the reference.
ON enables display of the specified reference.
OFF disables display of the specified reference.

DisplayGlobalRefItemState ¶

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:GLObal:REF<x>:STATE command.

Description

This command sets or queries the global state (display mode On or Off) of the specified reference waveform. Setting this value true (On or NR1 ≠ 0) turns on the source in the waveform view. Setting this value false (Off or NR1 = 0) turns off the source in the waveform view. This command only works if the specified reference waveform is added already.

Usage

Using the .query() method will send the DISplay:GLObal:REF<x>:STATE? query.
Using the .verify(value) method will send the DISplay:GLObal:REF<x>:STATE? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:GLObal:REF<x>:STATE value command.

SCPI Syntax

- DISplay:GLObal:REF<x>:STATE {ON|OFF|<NR1>}
- DISplay:GLObal:REF<x>:STATE?

Info

REF<x> is the Reference waveform number.
<NR1> = 0 disables the display of the specified reference; any other value enables display of the reference.
ON enables display of the specified reference.
OFF disables display of the specified reference.

DisplayIntensity ¶

Bases: SCPICmdRead

The DISplay:INTENSITy command.

Description

This query-only command returns the waveform saturation level and screen saver settings.

Usage

Using the .query() method will send the DISplay:INTENSITy? query.
Using the .verify(value) method will send the DISplay:INTENSITy? query and raise an AssertionError if the returned value does not match value.

SCPI Syntax

- DISplay:INTENSITy?

Properties

.backlight: The DISplay:INTENSITy:BACKLight command.

backlight `property` ¶

backlight: DisplayIntensityBacklight

Return the DISplay:INTENSITy:BACKLight command.

Description

This command sets or queries the display backlight intensity setting.

Usage

Using the .query() method will send the DISplay:INTENSITy:BACKLight? query.
Using the .verify(value) method will send the DISplay:INTENSITy:BACKLight? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:INTENSITy:BACKLight value command.

SCPI Syntax

- DISplay:INTENSITy:BACKLight {LOW|MEDium|HIGH}
- DISplay:INTENSITy:BACKLight?

Info

LOW selects a low brightness level.
MEDium selects a moderate brightness level.
HIGH selects a full brightness level.

Sub-properties

.autodim: The DISplay:INTENSITy:BACKLight:AUTODim command tree.

DisplayIntensityBacklight ¶

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:INTENSITy:BACKLight command.

Description

This command sets or queries the display backlight intensity setting.

Usage

Using the .query() method will send the DISplay:INTENSITy:BACKLight? query.
Using the .verify(value) method will send the DISplay:INTENSITy:BACKLight? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:INTENSITy:BACKLight value command.

SCPI Syntax

- DISplay:INTENSITy:BACKLight {LOW|MEDium|HIGH}
- DISplay:INTENSITy:BACKLight?

Info

LOW selects a low brightness level.
MEDium selects a moderate brightness level.
HIGH selects a full brightness level.

Properties

.autodim: The DISplay:INTENSITy:BACKLight:AUTODim command tree.

autodim `property` ¶

autodim: DisplayIntensityBacklightAutodim

Return the DISplay:INTENSITy:BACKLight:AUTODim command tree.

Usage

Using the .query() method will send the DISplay:INTENSITy:BACKLight:AUTODim? query.
Using the .verify(value) method will send the DISplay:INTENSITy:BACKLight:AUTODim? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.enable: The DISplay:INTENSITy:BACKLight:AUTODim:ENAble command.
.time: The DISplay:INTENSITy:BACKLight:AUTODim:TIMe command.

DisplayIntensityBacklightAutodim ¶

Bases: SCPICmdRead

The DISplay:INTENSITy:BACKLight:AUTODim command tree.

Usage

Using the .query() method will send the DISplay:INTENSITy:BACKLight:AUTODim? query.
Using the .verify(value) method will send the DISplay:INTENSITy:BACKLight:AUTODim? query and raise an AssertionError if the returned value does not match value.

Properties

.enable: The DISplay:INTENSITy:BACKLight:AUTODim:ENAble command.
.time: The DISplay:INTENSITy:BACKLight:AUTODim:TIMe command.

enable `property` ¶

enable: DisplayIntensityBacklightAutodimEnable

Return the DISplay:INTENSITy:BACKLight:AUTODim:ENAble command.

Description

Sets or queries the state of the display auto-dim feature. By default it is enabled. Once the backlight has dimmed, any button push, knob turn or mouse movement returns the backlight value to the value set by :DISplay:INTENSITy:BACKLight.

Usage

Using the .query() method will send the DISplay:INTENSITy:BACKLight:AUTODim:ENAble? query.
Using the .verify(value) method will send the DISplay:INTENSITy:BACKLight:AUTODim:ENAble? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:INTENSITy:BACKLight:AUTODim:ENAble value command.

SCPI Syntax

- DISplay:INTENSITy:BACKLight:AUTODim:ENAble {ON|OFF}
- DISplay:INTENSITy:BACKLight:AUTODim:ENAble?

Info

ON enables the display auto-dim feature.
OFF disables the display auto-dim feature.

time `property` ¶

time: DisplayIntensityBacklightAutodimTime

Return the DISplay:INTENSITy:BACKLight:AUTODim:TIMe command.

Description

Sets or queries the amount of time, in minutes, to wait for no user interface activity before automatically dimming the display. The time can range from a minimum of 10 minutes to a maximum of 1440 minutes (24 hours). The default is 10 minutes.

Usage

Using the .query() method will send the DISplay:INTENSITy:BACKLight:AUTODim:TIMe? query.
Using the .verify(value) method will send the DISplay:INTENSITy:BACKLight:AUTODim:TIMe? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:INTENSITy:BACKLight:AUTODim:TIMe value command.

SCPI Syntax

- DISplay:INTENSITy:BACKLight:AUTODim:TIMe <NR1>
- DISplay:INTENSITy:BACKLight:AUTODim:TIMe?

Info

<NR1> is the amount of time, in minutes, to wait for no user interface activity before automatically dimming the display.

DisplayIntensityBacklightAutodimEnable ¶

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:INTENSITy:BACKLight:AUTODim:ENAble command.

Description

Sets or queries the state of the display auto-dim feature. By default it is enabled. Once the backlight has dimmed, any button push, knob turn or mouse movement returns the backlight value to the value set by :DISplay:INTENSITy:BACKLight.

Usage

Using the .query() method will send the DISplay:INTENSITy:BACKLight:AUTODim:ENAble? query.
Using the .verify(value) method will send the DISplay:INTENSITy:BACKLight:AUTODim:ENAble? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:INTENSITy:BACKLight:AUTODim:ENAble value command.

SCPI Syntax

- DISplay:INTENSITy:BACKLight:AUTODim:ENAble {ON|OFF}
- DISplay:INTENSITy:BACKLight:AUTODim:ENAble?

Info

ON enables the display auto-dim feature.
OFF disables the display auto-dim feature.

DisplayIntensityBacklightAutodimTime ¶

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:INTENSITy:BACKLight:AUTODim:TIMe command.

Description

Sets or queries the amount of time, in minutes, to wait for no user interface activity before automatically dimming the display. The time can range from a minimum of 10 minutes to a maximum of 1440 minutes (24 hours). The default is 10 minutes.

Usage

Using the .query() method will send the DISplay:INTENSITy:BACKLight:AUTODim:TIMe? query.
Using the .verify(value) method will send the DISplay:INTENSITy:BACKLight:AUTODim:TIMe? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:INTENSITy:BACKLight:AUTODim:TIMe value command.

SCPI Syntax

- DISplay:INTENSITy:BACKLight:AUTODim:TIMe <NR1>
- DISplay:INTENSITy:BACKLight:AUTODim:TIMe?

Info

<NR1> is the amount of time, in minutes, to wait for no user interface activity before automatically dimming the display.

DisplayMathItem ¶

Bases: ValidatedDynamicNumberCmd, SCPICmdRead

The DISplay:MATH<x> command tree.

Usage

Using the .query() method will send the DISplay:MATH<x>? query.
Using the .verify(value) method will send the DISplay:MATH<x>? query and raise an AssertionError if the returned value does not match value.

Info

MATH<x> specifies the math waveform for which you want to change the waveform color, where is the math waveform number.

Properties

.invertcolor: The DISplay:MATH<x>:INVERTColor command.
.normalcolor: The DISplay:MATH<x>:NORMALColor command.

invertcolor `property` ¶

invertcolor: DisplayMathItemInvertcolor

Return the DISplay:MATH<x>:INVERTColor command.

Description

This command sets or queries the Inverted mode color of the specified input source to the specified color. You can assign one of 48 unique colors to any channel, math, or reference waveform. These colors replace the default Inverted colors and remain in effect until you reset the colors.

Usage

Using the .query() method will send the DISplay:MATH<x>:INVERTColor? query.
Using the .verify(value) method will send the DISplay:MATH<x>:INVERTColor? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:MATH<x>:INVERTColor value command.

SCPI Syntax

- DISplay:MATH<x>:INVERTColor COLOR<x>
- DISplay:MATH<x>:INVERTColor?

Info

MATH<x> specifies the math waveform for which you want to change the waveform color, where is the math waveform number.
COLOR<x> specifies the color to assign to the specified waveform, where = 0 to 47.

normalcolor `property` ¶

normalcolor: DisplayMathItemNormalcolor

Return the DISplay:MATH<x>:NORMALColor command.

Description

This command sets or queries the normal mode color of the specified input source to the specified color. You can assign one of 48 unique colors to any channel, math, or reference waveform. These colors replace the default normal colors and remain in effect until you reset the colors.

Usage

Using the .query() method will send the DISplay:MATH<x>:NORMALColor? query.
Using the .verify(value) method will send the DISplay:MATH<x>:NORMALColor? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:MATH<x>:NORMALColor value command.

SCPI Syntax

- DISplay:MATH<x>:NORMALColor COLOR<x>
- DISplay:MATH<x>:NORMALColor?

Info

MATH<x> specifies the math waveform for which you want to change the waveform color, where is the math waveform number.
COLOR<x> specifies the color to assign to the specified waveform, where = 0 to 47.

DisplayMathItemInvertcolor ¶

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:MATH<x>:INVERTColor command.

Description

This command sets or queries the Inverted mode color of the specified input source to the specified color. You can assign one of 48 unique colors to any channel, math, or reference waveform. These colors replace the default Inverted colors and remain in effect until you reset the colors.

Usage

Using the .query() method will send the DISplay:MATH<x>:INVERTColor? query.
Using the .verify(value) method will send the DISplay:MATH<x>:INVERTColor? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:MATH<x>:INVERTColor value command.

SCPI Syntax

- DISplay:MATH<x>:INVERTColor COLOR<x>
- DISplay:MATH<x>:INVERTColor?

Info

MATH<x> specifies the math waveform for which you want to change the waveform color, where is the math waveform number.
COLOR<x> specifies the color to assign to the specified waveform, where = 0 to 47.

DisplayMathItemNormalcolor ¶

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:MATH<x>:NORMALColor command.

Description

This command sets or queries the normal mode color of the specified input source to the specified color. You can assign one of 48 unique colors to any channel, math, or reference waveform. These colors replace the default normal colors and remain in effect until you reset the colors.

Usage

Using the .query() method will send the DISplay:MATH<x>:NORMALColor? query.
Using the .verify(value) method will send the DISplay:MATH<x>:NORMALColor? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:MATH<x>:NORMALColor value command.

SCPI Syntax

- DISplay:MATH<x>:NORMALColor COLOR<x>
- DISplay:MATH<x>:NORMALColor?

Info

MATH<x> specifies the math waveform for which you want to change the waveform color, where is the math waveform number.
COLOR<x> specifies the color to assign to the specified waveform, where = 0 to 47.

DisplayMathfftview1 ¶

Bases: SCPICmdRead

The DISplay:MATHFFTView1 command tree.

Usage

Using the .query() method will send the DISplay:MATHFFTView1? query.
Using the .verify(value) method will send the DISplay:MATHFFTView1? query and raise an AssertionError if the returned value does not match value.

Properties

.autoscale: The DISplay:MATHFFTView1:AUTOScale command.
.cursor: The DISplay:MATHFFTView1:CURSor command tree.
.gridlines: The DISplay:MATHFFTView1:GRIDlines command.
.math: The DISplay:MATHFFTView1:MATH command tree.
.xaxis: The DISplay:MATHFFTView1:XAXIS command tree.
.yaxis: The DISplay:MATHFFTView1:YAXIS command tree.
.zoom: The DISplay:MATHFFTView1:ZOOM command tree.

autoscale `property` ¶

autoscale: DisplayMathfftview1Autoscale

Return the DISplay:MATHFFTView1:AUTOScale command.

Description

This command sets or returns the enabled state of autoscale for Math/FFT waveforms.

Usage

Using the .query() method will send the DISplay:MATHFFTView1:AUTOScale? query.
Using the .verify(value) method will send the DISplay:MATHFFTView1:AUTOScale? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:MATHFFTView1:AUTOScale value command.

SCPI Syntax

- DISplay:MATHFFTView1:AUTOScale {ON|OFF|<NR1>}
- DISplay:MATHFFTView1:AUTOScale?

Info

1 is the Math-FFT waveform number.
OFF disables the autoscale feature.
ON enables the autoscale feature.
<NR1> = 0 disables the autoscale feature; any other value enables the autoscale feature.

cursor `property` ¶

cursor: DisplayMathfftview1Cursor

Return the DISplay:MATHFFTView1:CURSor command tree.

Usage

Using the .query() method will send the DISplay:MATHFFTView1:CURSor? query.
Using the .verify(value) method will send the DISplay:MATHFFTView1:CURSor? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.asource: The DISplay:MATHFFTView1:CURSor:ASOUrce command.
.bsource: The DISplay:MATHFFTView1:CURSor:BSOUrce command.
.ddt: The DISplay:MATHFFTView1:CURSor:DDT command.
.function: The DISplay:MATHFFTView1:CURSor:FUNCtion command.
.hbars: The DISplay:MATHFFTView1:CURSor:HBArs command tree.
.mode: The DISplay:MATHFFTView1:CURSor:MODe command.
.oneoverdeltatvalue: The DISplay:MATHFFTView1:CURSor:ONEOVERDELTATVALUE command.
.rolocation: The DISplay:MATHFFTView1:CURSor:ROLOCATION command.
.screen: The DISplay:MATHFFTView1:CURSor:SCREEN command tree.
.state: The DISplay:MATHFFTView1:CURSor:STATE command.
.vbars: The DISplay:MATHFFTView1:CURSor:VBArs command tree.
.waveform: The DISplay:MATHFFTView1:CURSor:WAVEform command tree.

gridlines `property` ¶

gridlines: DisplayMathfftview1Gridlines

Return the DISplay:MATHFFTView1:GRIDlines command.

Description

This command sets or queries the grid lines setting for the specified Math-FFT view.

Usage

Using the .query() method will send the DISplay:MATHFFTView1:GRIDlines? query.
Using the .verify(value) method will send the DISplay:MATHFFTView1:GRIDlines? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:MATHFFTView1:GRIDlines value command.

SCPI Syntax

- DISplay:MATHFFTView1:GRIDlines {HORizontal|VERTical|BOTH}
- DISplay:MATHFFTView1:GRIDlines?

Info

1 is the Math-FFT waveform number.
HORizontal specifies horizontal grid lines.
VERTical specifies vertical grid lines.
BOTH specifies both vertical and horizontal grid lines.

math `property` ¶

math: DisplayMathfftview1Math

Return the DISplay:MATHFFTView1:MATH command tree.

Usage

Using the .query() method will send the DISplay:MATHFFTView1:MATH? query.
Using the .verify(value) method will send the DISplay:MATHFFTView1:MATH? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.math: The DISplay:MATHFFTView1:MATH:MATH<x> command tree.

xaxis `property` ¶

xaxis: DisplayMathfftview1Xaxis

Return the DISplay:MATHFFTView1:XAXIS command tree.

Usage

Using the .query() method will send the DISplay:MATHFFTView1:XAXIS? query.
Using the .verify(value) method will send the DISplay:MATHFFTView1:XAXIS? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.scale: The DISplay:MATHFFTView1:XAXIS:SCALE command.

yaxis `property` ¶

yaxis: DisplayMathfftview1Yaxis

Return the DISplay:MATHFFTView1:YAXIS command tree.

Usage

Using the .query() method will send the DISplay:MATHFFTView1:YAXIS? query.
Using the .verify(value) method will send the DISplay:MATHFFTView1:YAXIS? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.scale: The DISplay:MATHFFTView1:YAXIS:SCALE command.

zoom `property` ¶

zoom: DisplayMathfftview1Zoom

Return the DISplay:MATHFFTView1:ZOOM command tree.

Usage

Using the .query() method will send the DISplay:MATHFFTView1:ZOOM? query.
Using the .verify(value) method will send the DISplay:MATHFFTView1:ZOOM? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.xaxis: The DISplay:MATHFFTView1:ZOOM:XAXIS command tree.
.yaxis: The DISplay:MATHFFTView1:ZOOM:YAXIS command tree.

DisplayMathfftview1Autoscale ¶

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:MATHFFTView1:AUTOScale command.

Description

This command sets or returns the enabled state of autoscale for Math/FFT waveforms.

Usage

Using the .query() method will send the DISplay:MATHFFTView1:AUTOScale? query.
Using the .verify(value) method will send the DISplay:MATHFFTView1:AUTOScale? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:MATHFFTView1:AUTOScale value command.

SCPI Syntax

- DISplay:MATHFFTView1:AUTOScale {ON|OFF|<NR1>}
- DISplay:MATHFFTView1:AUTOScale?

Info

1 is the Math-FFT waveform number.
OFF disables the autoscale feature.
ON enables the autoscale feature.
<NR1> = 0 disables the autoscale feature; any other value enables the autoscale feature.

DisplayMathfftview1Cursor ¶

Bases: SCPICmdRead

The DISplay:MATHFFTView1:CURSor command tree.

Usage

Using the .query() method will send the DISplay:MATHFFTView1:CURSor? query.
Using the .verify(value) method will send the DISplay:MATHFFTView1:CURSor? query and raise an AssertionError if the returned value does not match value.

Properties

.asource: The DISplay:MATHFFTView1:CURSor:ASOUrce command.
.bsource: The DISplay:MATHFFTView1:CURSor:BSOUrce command.
.ddt: The DISplay:MATHFFTView1:CURSor:DDT command.
.function: The DISplay:MATHFFTView1:CURSor:FUNCtion command.
.hbars: The DISplay:MATHFFTView1:CURSor:HBArs command tree.
.mode: The DISplay:MATHFFTView1:CURSor:MODe command.
.oneoverdeltatvalue: The DISplay:MATHFFTView1:CURSor:ONEOVERDELTATVALUE command.
.rolocation: The DISplay:MATHFFTView1:CURSor:ROLOCATION command.
.screen: The DISplay:MATHFFTView1:CURSor:SCREEN command tree.
.state: The DISplay:MATHFFTView1:CURSor:STATE command.
.vbars: The DISplay:MATHFFTView1:CURSor:VBArs command tree.
.waveform: The DISplay:MATHFFTView1:CURSor:WAVEform command tree.

asource `property` ¶

asource: DisplayMathfftview1CursorAsource

Return the DISplay:MATHFFTView1:CURSor:ASOUrce command.

Description

This command queries the Math-FFT waveform view source for cursor A.

Usage

Using the .query() method will send the DISplay:MATHFFTView1:CURSor:ASOUrce? query.
Using the .verify(value) method will send the DISplay:MATHFFTView1:CURSor:ASOUrce? query and raise an AssertionError if the returned value does not match value.

SCPI Syntax

- DISplay:MATHFFTView1:CURSor:ASOUrce?

Info

1 is the Math-FFT waveform number.

bsource `property` ¶

bsource: DisplayMathfftview1CursorBsource

Return the DISplay:MATHFFTView1:CURSor:BSOUrce command.

Description

This command queries the Math-FFT waveform view source for cursor B.

Usage

Using the .query() method will send the DISplay:MATHFFTView1:CURSor:BSOUrce? query.
Using the .verify(value) method will send the DISplay:MATHFFTView1:CURSor:BSOUrce? query and raise an AssertionError if the returned value does not match value.

SCPI Syntax

- DISplay:MATHFFTView1:CURSor:BSOUrce?

Info

1 is the Math-FFT waveform number.

ddt `property` ¶

ddt: DisplayMathfftview1CursorDdt

Return the DISplay:MATHFFTView1:CURSor:DDT command.

Description

This command queries the delta Y over delta X (ΔY/Δ X) cursor readout value of the specified cursor in the specified Math-FFT view. NOTE : If the current cursor is set to horizontal mode, this command will time out.

Usage

Using the .query() method will send the DISplay:MATHFFTView1:CURSor:DDT? query.
Using the .verify(value) method will send the DISplay:MATHFFTView1:CURSor:DDT? query and raise an AssertionError if the returned value does not match value.

SCPI Syntax

- DISplay:MATHFFTView1:CURSor:DDT?

Info

1 is the Math-FFT waveform number.

function `property` ¶

function: DisplayMathfftview1CursorFunction

Return the DISplay:MATHFFTView1:CURSor:FUNCtion command.

Description

This command sets or queries the cursor type for the specified Math-FFT view.

Usage

Using the .query() method will send the DISplay:MATHFFTView1:CURSor:FUNCtion? query.
Using the .verify(value) method will send the DISplay:MATHFFTView1:CURSor:FUNCtion? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:MATHFFTView1:CURSor:FUNCtion value command.

SCPI Syntax

- DISplay:MATHFFTView1:CURSor:FUNCtion {WAVEform|VBArs|HBArs|SCREEN}
- DISplay:MATHFFTView1:CURSor:FUNCtion?

Info

1 is the Math-FFT waveform number.
WAVEform specifies to display the paired vertical cursors in YT display format for measuring waveform amplitude and time. Measurements are taken at where the cursor intersects the waveform, and tracks waveform changes.
VBArs specifies vertical bar cursors, which measure in horizontal units.
HBArs specifies horizontal bar cursors, which measure in vertical units.
SCREEN specifies to display both horizontal and vertical bar cursors, which display the horizontal and vertical positions of the cursors, not waveform levels. Use these cursors to measure anywhere in the waveform display area.

hbars `property` ¶

hbars: DisplayMathfftview1CursorHbars

Return the DISplay:MATHFFTView1:CURSor:HBArs command tree.

Usage

Using the .query() method will send the DISplay:MATHFFTView1:CURSor:HBArs? query.
Using the .verify(value) method will send the DISplay:MATHFFTView1:CURSor:HBArs? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.aposition: The DISplay:MATHFFTView1:CURSor:HBArs:APOSition command.
.aunits: The DISplay:MATHFFTView1:CURSor:HBArs:AUNIts command.
.bposition: The DISplay:MATHFFTView1:CURSor:HBArs:BPOSition command.
.bunits: The DISplay:MATHFFTView1:CURSor:HBArs:BUNIts command.
.delta: The DISplay:MATHFFTView1:CURSor:HBArs:DELTa command.

mode `property` ¶

mode: DisplayMathfftview1CursorMode

Return the DISplay:MATHFFTView1:CURSor:MODe command.

Description

This command sets or queries the cursor tracking mode of the specified Math-FFT view.

Usage

Using the .write(value) method will send the DISplay:MATHFFTView1:CURSor:MODe value command.

SCPI Syntax

- DISplay:MATHFFTView1:CURSor:MODe {INDEPENDENT|TRACK}

Info

1 is the Math-FFT waveform number.
INDEPENDENT allows independent adjustment of the two cursors.
TRACK ties the navigational functionality of the two cursors together. For cursor 1 adjustments, this ties the movement of the two cursors together; however, cursor 2 continues to move independently of cursor 1.

oneoverdeltatvalue `property` ¶

oneoverdeltatvalue: DisplayMathfftview1CursorOneoverdeltatvalue

Return the DISplay:MATHFFTView1:CURSor:ONEOVERDELTATVALUE command.

Description

This command queries the one over delta cursor readout value of the specified Math-FFT view.

Usage

Using the .query() method will send the DISplay:MATHFFTView1:CURSor:ONEOVERDELTATVALUE? query.
Using the .verify(value) method will send the DISplay:MATHFFTView1:CURSor:ONEOVERDELTATVALUE? query and raise an AssertionError if the returned value does not match value.

SCPI Syntax

- DISplay:MATHFFTView1:CURSor:ONEOVERDELTATVALUE?

Info

1 is the Math-FFT waveform number.

rolocation `property` ¶

rolocation: DisplayMathfftview1CursorRolocation

Return the DISplay:MATHFFTView1:CURSor:ROLOCATION command.

Description

This command sets or queries the location to display the specified Math FFT plot cursor readouts (in the plot graticule or in a badge in the Results Bar).

Usage

Using the .query() method will send the DISplay:MATHFFTView1:CURSor:ROLOCATION? query.
Using the .verify(value) method will send the DISplay:MATHFFTView1:CURSor:ROLOCATION? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:MATHFFTView1:CURSor:ROLOCATION value command.

SCPI Syntax

- DISplay:MATHFFTView1:CURSor:ROLOCATION {GRATICULE|BADGE}
- DISplay:MATHFFTView1:CURSor:ROLOCATION?

Info

1 is the Math-FFT plot number.
GRATICULE sets the Math FFT plot cursor readouts to display as part of the cursors in the plot view.
BADGE removes the Math FFT plot cursor readouts from the cursors in the graticule and displays the cursor information as a badge in the Results Bar.

screen `property` ¶

screen: DisplayMathfftview1CursorScreen

Return the DISplay:MATHFFTView1:CURSor:SCREEN command tree.

Usage

Using the .query() method will send the DISplay:MATHFFTView1:CURSor:SCREEN? query.
Using the .verify(value) method will send the DISplay:MATHFFTView1:CURSor:SCREEN? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.axposition: The DISplay:MATHFFTView1:CURSor:SCREEN:AXPOSition command.
.ayposition: The DISplay:MATHFFTView1:CURSor:SCREEN:AYPOSition command.
.bxposition: The DISplay:MATHFFTView1:CURSor:SCREEN:BXPOSition command.
.byposition: The DISplay:MATHFFTView1:CURSor:SCREEN:BYPOSition command.

state `property` ¶

state: DisplayMathfftview1CursorState

Return the DISplay:MATHFFTView1:CURSor:STATE command.

Description

This command sets or queries the visible state of cursors for the specified Math-FFT view.

Usage

Using the .query() method will send the DISplay:MATHFFTView1:CURSor:STATE? query.
Using the .verify(value) method will send the DISplay:MATHFFTView1:CURSor:STATE? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:MATHFFTView1:CURSor:STATE value command.

SCPI Syntax

- DISplay:MATHFFTView1:CURSor:STATE {ON|OFF|1|0}
- DISplay:MATHFFTView1:CURSor:STATE?

Info

1 is the Math-FFT waveform number.
ON enables the cursors.
1 enables the cursors.
OFF disables the cursors.
0 disables the cursors.

vbars `property` ¶

vbars: DisplayMathfftview1CursorVbars

Return the DISplay:MATHFFTView1:CURSor:VBArs command tree.

Usage

Using the .query() method will send the DISplay:MATHFFTView1:CURSor:VBArs? query.
Using the .verify(value) method will send the DISplay:MATHFFTView1:CURSor:VBArs? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.aposition: The DISplay:MATHFFTView1:CURSor:VBArs:APOSition command.
.aunits: The DISplay:MATHFFTView1:CURSor:VBArs:AUNIts command.
.bposition: The DISplay:MATHFFTView1:CURSor:VBArs:BPOSition command.
.bunits: The DISplay:MATHFFTView1:CURSor:VBArs:BUNIts command.
.delta: The DISplay:MATHFFTView1:CURSor:VBArs:DELTa command.

waveform `property` ¶

waveform: DisplayMathfftview1CursorWaveform

Return the DISplay:MATHFFTView1:CURSor:WAVEform command tree.

Usage

Using the .query() method will send the DISplay:MATHFFTView1:CURSor:WAVEform? query.
Using the .verify(value) method will send the DISplay:MATHFFTView1:CURSor:WAVEform? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.aposition: The DISplay:MATHFFTView1:CURSor:WAVEform:APOSition command.
.bposition: The DISplay:MATHFFTView1:CURSor:WAVEform:BPOSition command.

DisplayMathfftview1CursorAsource ¶

Bases: SCPICmdRead

The DISplay:MATHFFTView1:CURSor:ASOUrce command.

Description

This command queries the Math-FFT waveform view source for cursor A.

Usage

Using the .query() method will send the DISplay:MATHFFTView1:CURSor:ASOUrce? query.
Using the .verify(value) method will send the DISplay:MATHFFTView1:CURSor:ASOUrce? query and raise an AssertionError if the returned value does not match value.

SCPI Syntax

- DISplay:MATHFFTView1:CURSor:ASOUrce?

Info

1 is the Math-FFT waveform number.

DisplayMathfftview1CursorBsource ¶

Bases: SCPICmdRead

The DISplay:MATHFFTView1:CURSor:BSOUrce command.

Description

This command queries the Math-FFT waveform view source for cursor B.

Usage

Using the .query() method will send the DISplay:MATHFFTView1:CURSor:BSOUrce? query.
Using the .verify(value) method will send the DISplay:MATHFFTView1:CURSor:BSOUrce? query and raise an AssertionError if the returned value does not match value.

SCPI Syntax

- DISplay:MATHFFTView1:CURSor:BSOUrce?

Info

1 is the Math-FFT waveform number.

DisplayMathfftview1CursorDdt ¶

Bases: SCPICmdRead

The DISplay:MATHFFTView1:CURSor:DDT command.

Description

This command queries the delta Y over delta X (ΔY/Δ X) cursor readout value of the specified cursor in the specified Math-FFT view. NOTE : If the current cursor is set to horizontal mode, this command will time out.

Usage

Using the .query() method will send the DISplay:MATHFFTView1:CURSor:DDT? query.
Using the .verify(value) method will send the DISplay:MATHFFTView1:CURSor:DDT? query and raise an AssertionError if the returned value does not match value.

SCPI Syntax

- DISplay:MATHFFTView1:CURSor:DDT?

Info

1 is the Math-FFT waveform number.

DisplayMathfftview1CursorFunction ¶

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:MATHFFTView1:CURSor:FUNCtion command.

Description

This command sets or queries the cursor type for the specified Math-FFT view.

Usage

Using the .query() method will send the DISplay:MATHFFTView1:CURSor:FUNCtion? query.
Using the .verify(value) method will send the DISplay:MATHFFTView1:CURSor:FUNCtion? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:MATHFFTView1:CURSor:FUNCtion value command.

SCPI Syntax

- DISplay:MATHFFTView1:CURSor:FUNCtion {WAVEform|VBArs|HBArs|SCREEN}
- DISplay:MATHFFTView1:CURSor:FUNCtion?

Info

1 is the Math-FFT waveform number.
WAVEform specifies to display the paired vertical cursors in YT display format for measuring waveform amplitude and time. Measurements are taken at where the cursor intersects the waveform, and tracks waveform changes.
VBArs specifies vertical bar cursors, which measure in horizontal units.
HBArs specifies horizontal bar cursors, which measure in vertical units.
SCREEN specifies to display both horizontal and vertical bar cursors, which display the horizontal and vertical positions of the cursors, not waveform levels. Use these cursors to measure anywhere in the waveform display area.

DisplayMathfftview1CursorHbars ¶

Bases: SCPICmdRead

The DISplay:MATHFFTView1:CURSor:HBArs command tree.

Usage

Using the .query() method will send the DISplay:MATHFFTView1:CURSor:HBArs? query.
Using the .verify(value) method will send the DISplay:MATHFFTView1:CURSor:HBArs? query and raise an AssertionError if the returned value does not match value.

Properties

.aposition: The DISplay:MATHFFTView1:CURSor:HBArs:APOSition command.
.aunits: The DISplay:MATHFFTView1:CURSor:HBArs:AUNIts command.
.bposition: The DISplay:MATHFFTView1:CURSor:HBArs:BPOSition command.
.bunits: The DISplay:MATHFFTView1:CURSor:HBArs:BUNIts command.
.delta: The DISplay:MATHFFTView1:CURSor:HBArs:DELTa command.

aposition `property` ¶

aposition: DisplayMathfftview1CursorHbarsAposition

Return the DISplay:MATHFFTView1:CURSor:HBArs:APOSition command.

Description

This command sets or returns the position of horizontal cursor A for the specified Math-FFT view.

Usage

Using the .query() method will send the DISplay:MATHFFTView1:CURSor:HBArs:APOSition? query.
Using the .verify(value) method will send the DISplay:MATHFFTView1:CURSor:HBArs:APOSition? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:MATHFFTView1:CURSor:HBArs:APOSition value command.

SCPI Syntax

- DISplay:MATHFFTView1:CURSor:HBArs:APOSition <NR3>
- DISplay:MATHFFTView1:CURSor:HBArs:APOSition?

Info

1 is the Math-FFT waveform number.
<NR3> is the cursor position of the specified cursor in the specified view.

aunits `property` ¶

aunits: DisplayMathfftview1CursorHbarsAunits

Return the DISplay:MATHFFTView1:CURSor:HBArs:AUNIts command.

Description

This command queries the vertical units of horizontal cursor A for the specified Math-FFT view.

Usage

Using the .query() method will send the DISplay:MATHFFTView1:CURSor:HBArs:AUNIts? query.
Using the .verify(value) method will send the DISplay:MATHFFTView1:CURSor:HBArs:AUNIts? query and raise an AssertionError if the returned value does not match value.

SCPI Syntax

- DISplay:MATHFFTView1:CURSor:HBArs:AUNIts?

Info

1 is the Math-FFT waveform number.

bposition `property` ¶

bposition: DisplayMathfftview1CursorHbarsBposition

Return the DISplay:MATHFFTView1:CURSor:HBArs:BPOSition command.

Description

This command sets or returns the position of horizontal cursor B for the specified Math-FFT view.

Usage

Using the .query() method will send the DISplay:MATHFFTView1:CURSor:HBArs:BPOSition? query.
Using the .verify(value) method will send the DISplay:MATHFFTView1:CURSor:HBArs:BPOSition? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:MATHFFTView1:CURSor:HBArs:BPOSition value command.

SCPI Syntax

- DISplay:MATHFFTView1:CURSor:HBArs:BPOSition <NR3>
- DISplay:MATHFFTView1:CURSor:HBArs:BPOSition?

Info

1 is the Math-FFT waveform number.
<NR3> is the vertical cursor B position for the specified Math-FFT view.

bunits `property` ¶

bunits: DisplayMathfftview1CursorHbarsBunits

Return the DISplay:MATHFFTView1:CURSor:HBArs:BUNIts command.

Description

This command queries the vertical units of horizontal cursor B for the specified Math-FFT view.

Usage

Using the .query() method will send the DISplay:MATHFFTView1:CURSor:HBArs:BUNIts? query.
Using the .verify(value) method will send the DISplay:MATHFFTView1:CURSor:HBArs:BUNIts? query and raise an AssertionError if the returned value does not match value.

SCPI Syntax

- DISplay:MATHFFTView1:CURSor:HBArs:BUNIts?

Info

1 is the Math-FFT waveform number.

delta `property` ¶

delta: DisplayMathfftview1CursorHbarsDelta

Return the DISplay:MATHFFTView1:CURSor:HBArs:DELTa command.

Description

This command queries the horizontal cursor’s delta value of the specified Math-FFT view.

Usage

Using the .query() method will send the DISplay:MATHFFTView1:CURSor:HBArs:DELTa? query.
Using the .verify(value) method will send the DISplay:MATHFFTView1:CURSor:HBArs:DELTa? query and raise an AssertionError if the returned value does not match value.

SCPI Syntax

- DISplay:MATHFFTView1:CURSor:HBArs:DELTa?

Info

1 is the Math-FFT waveform number.

DisplayMathfftview1CursorHbarsAposition ¶

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:MATHFFTView1:CURSor:HBArs:APOSition command.

Description

This command sets or returns the position of horizontal cursor A for the specified Math-FFT view.

Usage

Using the .query() method will send the DISplay:MATHFFTView1:CURSor:HBArs:APOSition? query.
Using the .verify(value) method will send the DISplay:MATHFFTView1:CURSor:HBArs:APOSition? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:MATHFFTView1:CURSor:HBArs:APOSition value command.

SCPI Syntax

- DISplay:MATHFFTView1:CURSor:HBArs:APOSition <NR3>
- DISplay:MATHFFTView1:CURSor:HBArs:APOSition?

Info

1 is the Math-FFT waveform number.
<NR3> is the cursor position of the specified cursor in the specified view.

DisplayMathfftview1CursorHbarsAunits ¶

Bases: SCPICmdRead

The DISplay:MATHFFTView1:CURSor:HBArs:AUNIts command.

Description

This command queries the vertical units of horizontal cursor A for the specified Math-FFT view.

Usage

Using the .query() method will send the DISplay:MATHFFTView1:CURSor:HBArs:AUNIts? query.
Using the .verify(value) method will send the DISplay:MATHFFTView1:CURSor:HBArs:AUNIts? query and raise an AssertionError if the returned value does not match value.

SCPI Syntax

- DISplay:MATHFFTView1:CURSor:HBArs:AUNIts?

Info

1 is the Math-FFT waveform number.

DisplayMathfftview1CursorHbarsBposition ¶

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:MATHFFTView1:CURSor:HBArs:BPOSition command.

Description

This command sets or returns the position of horizontal cursor B for the specified Math-FFT view.

Usage

Using the .query() method will send the DISplay:MATHFFTView1:CURSor:HBArs:BPOSition? query.
Using the .verify(value) method will send the DISplay:MATHFFTView1:CURSor:HBArs:BPOSition? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:MATHFFTView1:CURSor:HBArs:BPOSition value command.

SCPI Syntax

- DISplay:MATHFFTView1:CURSor:HBArs:BPOSition <NR3>
- DISplay:MATHFFTView1:CURSor:HBArs:BPOSition?

Info

1 is the Math-FFT waveform number.
<NR3> is the vertical cursor B position for the specified Math-FFT view.

DisplayMathfftview1CursorHbarsBunits ¶

Bases: SCPICmdRead

The DISplay:MATHFFTView1:CURSor:HBArs:BUNIts command.

Description

This command queries the vertical units of horizontal cursor B for the specified Math-FFT view.

Usage

Using the .query() method will send the DISplay:MATHFFTView1:CURSor:HBArs:BUNIts? query.
Using the .verify(value) method will send the DISplay:MATHFFTView1:CURSor:HBArs:BUNIts? query and raise an AssertionError if the returned value does not match value.

SCPI Syntax

- DISplay:MATHFFTView1:CURSor:HBArs:BUNIts?

Info

1 is the Math-FFT waveform number.

DisplayMathfftview1CursorHbarsDelta ¶

Bases: SCPICmdRead

The DISplay:MATHFFTView1:CURSor:HBArs:DELTa command.

Description

This command queries the horizontal cursor’s delta value of the specified Math-FFT view.

Usage

Using the .query() method will send the DISplay:MATHFFTView1:CURSor:HBArs:DELTa? query.
Using the .verify(value) method will send the DISplay:MATHFFTView1:CURSor:HBArs:DELTa? query and raise an AssertionError if the returned value does not match value.

SCPI Syntax

- DISplay:MATHFFTView1:CURSor:HBArs:DELTa?

Info

1 is the Math-FFT waveform number.

DisplayMathfftview1CursorMode ¶

Bases: SCPICmdWrite

The DISplay:MATHFFTView1:CURSor:MODe command.

Description

This command sets or queries the cursor tracking mode of the specified Math-FFT view.

Usage

Using the .write(value) method will send the DISplay:MATHFFTView1:CURSor:MODe value command.

SCPI Syntax

- DISplay:MATHFFTView1:CURSor:MODe {INDEPENDENT|TRACK}

Info

1 is the Math-FFT waveform number.
INDEPENDENT allows independent adjustment of the two cursors.
TRACK ties the navigational functionality of the two cursors together. For cursor 1 adjustments, this ties the movement of the two cursors together; however, cursor 2 continues to move independently of cursor 1.

DisplayMathfftview1CursorOneoverdeltatvalue ¶

Bases: SCPICmdRead

The DISplay:MATHFFTView1:CURSor:ONEOVERDELTATVALUE command.

Description

This command queries the one over delta cursor readout value of the specified Math-FFT view.

Usage

Using the .query() method will send the DISplay:MATHFFTView1:CURSor:ONEOVERDELTATVALUE? query.
Using the .verify(value) method will send the DISplay:MATHFFTView1:CURSor:ONEOVERDELTATVALUE? query and raise an AssertionError if the returned value does not match value.

SCPI Syntax

- DISplay:MATHFFTView1:CURSor:ONEOVERDELTATVALUE?

Info

1 is the Math-FFT waveform number.

DisplayMathfftview1CursorRolocation ¶

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:MATHFFTView1:CURSor:ROLOCATION command.

Description

This command sets or queries the location to display the specified Math FFT plot cursor readouts (in the plot graticule or in a badge in the Results Bar).

Usage

Using the .query() method will send the DISplay:MATHFFTView1:CURSor:ROLOCATION? query.
Using the .verify(value) method will send the DISplay:MATHFFTView1:CURSor:ROLOCATION? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:MATHFFTView1:CURSor:ROLOCATION value command.

SCPI Syntax

- DISplay:MATHFFTView1:CURSor:ROLOCATION {GRATICULE|BADGE}
- DISplay:MATHFFTView1:CURSor:ROLOCATION?

Info

1 is the Math-FFT plot number.
GRATICULE sets the Math FFT plot cursor readouts to display as part of the cursors in the plot view.
BADGE removes the Math FFT plot cursor readouts from the cursors in the graticule and displays the cursor information as a badge in the Results Bar.

DisplayMathfftview1CursorScreen ¶

Bases: SCPICmdRead

The DISplay:MATHFFTView1:CURSor:SCREEN command tree.

Usage

Using the .query() method will send the DISplay:MATHFFTView1:CURSor:SCREEN? query.
Using the .verify(value) method will send the DISplay:MATHFFTView1:CURSor:SCREEN? query and raise an AssertionError if the returned value does not match value.

Properties

.axposition: The DISplay:MATHFFTView1:CURSor:SCREEN:AXPOSition command.
.ayposition: The DISplay:MATHFFTView1:CURSor:SCREEN:AYPOSition command.
.bxposition: The DISplay:MATHFFTView1:CURSor:SCREEN:BXPOSition command.
.byposition: The DISplay:MATHFFTView1:CURSor:SCREEN:BYPOSition command.

axposition `property` ¶

axposition: DisplayMathfftview1CursorScreenAxposition

Return the DISplay:MATHFFTView1:CURSor:SCREEN:AXPOSition command.

Description

This command sets or returns the vertical cursor A x-axis waveform measurement position of the specified Math-FFT view.

Usage

Using the .query() method will send the DISplay:MATHFFTView1:CURSor:SCREEN:AXPOSition? query.
Using the .verify(value) method will send the DISplay:MATHFFTView1:CURSor:SCREEN:AXPOSition? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:MATHFFTView1:CURSor:SCREEN:AXPOSition value command.

SCPI Syntax

- DISplay:MATHFFTView1:CURSor:SCREEN:AXPOSition <NR3>
- DISplay:MATHFFTView1:CURSor:SCREEN:AXPOSition?

Info

1 is the Math-FFT waveform number.
<NR3> is the cursor position in MHz.

ayposition `property` ¶

ayposition: DisplayMathfftview1CursorScreenAyposition

Return the DISplay:MATHFFTView1:CURSor:SCREEN:AYPOSition command.

Description

This command sets or returns the vertical cursor A y-axis amplitude measurement value of the specified Math-FFT view.

Usage

Using the .query() method will send the DISplay:MATHFFTView1:CURSor:SCREEN:AYPOSition? query.
Using the .verify(value) method will send the DISplay:MATHFFTView1:CURSor:SCREEN:AYPOSition? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:MATHFFTView1:CURSor:SCREEN:AYPOSition value command.

SCPI Syntax

- DISplay:MATHFFTView1:CURSor:SCREEN:AYPOSition <NR3>
- DISplay:MATHFFTView1:CURSor:SCREEN:AYPOSition?

Info

1 is the Math-FFT waveform number.
<NR3> is the cursor A position of the specified cursor in the specified view.

bxposition `property` ¶

bxposition: DisplayMathfftview1CursorScreenBxposition

Return the DISplay:MATHFFTView1:CURSor:SCREEN:BXPOSition command.

Description

This command sets or returns the vertical cursor B x-axis waveform time measurement position of the specified Math-FFT view.

Usage

Using the .query() method will send the DISplay:MATHFFTView1:CURSor:SCREEN:BXPOSition? query.
Using the .verify(value) method will send the DISplay:MATHFFTView1:CURSor:SCREEN:BXPOSition? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:MATHFFTView1:CURSor:SCREEN:BXPOSition value command.

SCPI Syntax

- DISplay:MATHFFTView1:CURSor:SCREEN:BXPOSition <NR3>
- DISplay:MATHFFTView1:CURSor:SCREEN:BXPOSition?

Info

1 is the Math-FFT waveform number.
<NR3> is the horizontal cursor B position of the specified cursor in the specified view.

byposition `property` ¶

byposition: DisplayMathfftview1CursorScreenByposition

Return the DISplay:MATHFFTView1:CURSor:SCREEN:BYPOSition command.

Description

This command sets or returns the vertical cursor B y-axis amplitude measurement value of the specified Math-FFT view.

Usage

Using the .query() method will send the DISplay:MATHFFTView1:CURSor:SCREEN:BYPOSition? query.
Using the .verify(value) method will send the DISplay:MATHFFTView1:CURSor:SCREEN:BYPOSition? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:MATHFFTView1:CURSor:SCREEN:BYPOSition value command.

SCPI Syntax

- DISplay:MATHFFTView1:CURSor:SCREEN:BYPOSition <NR3>
- DISplay:MATHFFTView1:CURSor:SCREEN:BYPOSition?

Info

1 is the Math-FFT waveform number.
<NR3> is the vertical cursor B position of the specified cursor in the specified view.

DisplayMathfftview1CursorScreenAxposition ¶

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:MATHFFTView1:CURSor:SCREEN:AXPOSition command.

Description

This command sets or returns the vertical cursor A x-axis waveform measurement position of the specified Math-FFT view.

Usage

Using the .query() method will send the DISplay:MATHFFTView1:CURSor:SCREEN:AXPOSition? query.
Using the .verify(value) method will send the DISplay:MATHFFTView1:CURSor:SCREEN:AXPOSition? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:MATHFFTView1:CURSor:SCREEN:AXPOSition value command.

SCPI Syntax

- DISplay:MATHFFTView1:CURSor:SCREEN:AXPOSition <NR3>
- DISplay:MATHFFTView1:CURSor:SCREEN:AXPOSition?

Info

1 is the Math-FFT waveform number.
<NR3> is the cursor position in MHz.

DisplayMathfftview1CursorScreenAyposition ¶

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:MATHFFTView1:CURSor:SCREEN:AYPOSition command.

Description

This command sets or returns the vertical cursor A y-axis amplitude measurement value of the specified Math-FFT view.

Usage

Using the .query() method will send the DISplay:MATHFFTView1:CURSor:SCREEN:AYPOSition? query.
Using the .verify(value) method will send the DISplay:MATHFFTView1:CURSor:SCREEN:AYPOSition? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:MATHFFTView1:CURSor:SCREEN:AYPOSition value command.

SCPI Syntax

- DISplay:MATHFFTView1:CURSor:SCREEN:AYPOSition <NR3>
- DISplay:MATHFFTView1:CURSor:SCREEN:AYPOSition?

Info

1 is the Math-FFT waveform number.
<NR3> is the cursor A position of the specified cursor in the specified view.

DisplayMathfftview1CursorScreenBxposition ¶

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:MATHFFTView1:CURSor:SCREEN:BXPOSition command.

Description

This command sets or returns the vertical cursor B x-axis waveform time measurement position of the specified Math-FFT view.

Usage

Using the .query() method will send the DISplay:MATHFFTView1:CURSor:SCREEN:BXPOSition? query.
Using the .verify(value) method will send the DISplay:MATHFFTView1:CURSor:SCREEN:BXPOSition? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:MATHFFTView1:CURSor:SCREEN:BXPOSition value command.

SCPI Syntax

- DISplay:MATHFFTView1:CURSor:SCREEN:BXPOSition <NR3>
- DISplay:MATHFFTView1:CURSor:SCREEN:BXPOSition?

Info

1 is the Math-FFT waveform number.
<NR3> is the horizontal cursor B position of the specified cursor in the specified view.

DisplayMathfftview1CursorScreenByposition ¶

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:MATHFFTView1:CURSor:SCREEN:BYPOSition command.

Description

This command sets or returns the vertical cursor B y-axis amplitude measurement value of the specified Math-FFT view.

Usage

Using the .query() method will send the DISplay:MATHFFTView1:CURSor:SCREEN:BYPOSition? query.
Using the .verify(value) method will send the DISplay:MATHFFTView1:CURSor:SCREEN:BYPOSition? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:MATHFFTView1:CURSor:SCREEN:BYPOSition value command.

SCPI Syntax

- DISplay:MATHFFTView1:CURSor:SCREEN:BYPOSition <NR3>
- DISplay:MATHFFTView1:CURSor:SCREEN:BYPOSition?

Info

1 is the Math-FFT waveform number.
<NR3> is the vertical cursor B position of the specified cursor in the specified view.

DisplayMathfftview1CursorState ¶

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:MATHFFTView1:CURSor:STATE command.

Description

This command sets or queries the visible state of cursors for the specified Math-FFT view.

Usage

Using the .query() method will send the DISplay:MATHFFTView1:CURSor:STATE? query.
Using the .verify(value) method will send the DISplay:MATHFFTView1:CURSor:STATE? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:MATHFFTView1:CURSor:STATE value command.

SCPI Syntax

- DISplay:MATHFFTView1:CURSor:STATE {ON|OFF|1|0}
- DISplay:MATHFFTView1:CURSor:STATE?

Info

1 is the Math-FFT waveform number.
ON enables the cursors.
1 enables the cursors.
OFF disables the cursors.
0 disables the cursors.

DisplayMathfftview1CursorVbars ¶

Bases: SCPICmdRead

The DISplay:MATHFFTView1:CURSor:VBArs command tree.

Usage

Using the .query() method will send the DISplay:MATHFFTView1:CURSor:VBArs? query.
Using the .verify(value) method will send the DISplay:MATHFFTView1:CURSor:VBArs? query and raise an AssertionError if the returned value does not match value.

Properties

.aposition: The DISplay:MATHFFTView1:CURSor:VBArs:APOSition command.
.aunits: The DISplay:MATHFFTView1:CURSor:VBArs:AUNIts command.
.bposition: The DISplay:MATHFFTView1:CURSor:VBArs:BPOSition command.
.bunits: The DISplay:MATHFFTView1:CURSor:VBArs:BUNIts command.
.delta: The DISplay:MATHFFTView1:CURSor:VBArs:DELTa command.

aposition `property` ¶

aposition: DisplayMathfftview1CursorVbarsAposition

Return the DISplay:MATHFFTView1:CURSor:VBArs:APOSition command.

Description

This command sets or queries the horizontal cursor A position for the specified Math-FFT view.

Usage

Using the .query() method will send the DISplay:MATHFFTView1:CURSor:VBArs:APOSition? query.
Using the .verify(value) method will send the DISplay:MATHFFTView1:CURSor:VBArs:APOSition? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:MATHFFTView1:CURSor:VBArs:APOSition value command.

SCPI Syntax

- DISplay:MATHFFTView1:CURSor:VBArs:APOSition <NR3>
- DISplay:MATHFFTView1:CURSor:VBArs:APOSition?

Info

1 is the Math-FFT waveform number.
<NR3> sets the vertical cursor A position in the specified view.

aunits `property` ¶

aunits: DisplayMathfftview1CursorVbarsAunits

Return the DISplay:MATHFFTView1:CURSor:VBArs:AUNIts command.

Description

This command queries the vertical cursor A measurement units for the specified Math-FFT view.

Usage

Using the .query() method will send the DISplay:MATHFFTView1:CURSor:VBArs:AUNIts? query.
Using the .verify(value) method will send the DISplay:MATHFFTView1:CURSor:VBArs:AUNIts? query and raise an AssertionError if the returned value does not match value.

SCPI Syntax

- DISplay:MATHFFTView1:CURSor:VBArs:AUNIts?

Info

1 is the Math-FFT waveform number.

bposition `property` ¶

bposition: DisplayMathfftview1CursorVbarsBposition

Return the DISplay:MATHFFTView1:CURSor:VBArs:BPOSition command.

Description

This command sets or queries the vertical cursor B position for the specified Math-FFT view.

Usage

Using the .query() method will send the DISplay:MATHFFTView1:CURSor:VBArs:BPOSition? query.
Using the .verify(value) method will send the DISplay:MATHFFTView1:CURSor:VBArs:BPOSition? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:MATHFFTView1:CURSor:VBArs:BPOSition value command.

SCPI Syntax

- DISplay:MATHFFTView1:CURSor:VBArs:BPOSition <NR3>
- DISplay:MATHFFTView1:CURSor:VBArs:BPOSition?

Info

1 is the Math-FFT waveform number.
<NR3> sets the vertical cursor B position in the specified view.

bunits `property` ¶

bunits: DisplayMathfftview1CursorVbarsBunits

Return the DISplay:MATHFFTView1:CURSor:VBArs:BUNIts command.

Description

This command queries the vertical cursor B measurement units for the specified Math-FFT view.

Usage

Using the .query() method will send the DISplay:MATHFFTView1:CURSor:VBArs:BUNIts? query.
Using the .verify(value) method will send the DISplay:MATHFFTView1:CURSor:VBArs:BUNIts? query and raise an AssertionError if the returned value does not match value.

SCPI Syntax

- DISplay:MATHFFTView1:CURSor:VBArs:BUNIts?

Info

1 is the Math-FFT waveform number.

delta `property` ¶

delta: DisplayMathfftview1CursorVbarsDelta

Return the DISplay:MATHFFTView1:CURSor:VBArs:DELTa command.

Description

This command queries the vertical cursor’s delta T readout value for the specified Math-FFT view.

Usage

Using the .query() method will send the DISplay:MATHFFTView1:CURSor:VBArs:DELTa? query.
Using the .verify(value) method will send the DISplay:MATHFFTView1:CURSor:VBArs:DELTa? query and raise an AssertionError if the returned value does not match value.

SCPI Syntax

- DISplay:MATHFFTView1:CURSor:VBArs:DELTa?

Info

1 is the Math-FFT waveform number.

DisplayMathfftview1CursorVbarsAposition ¶

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:MATHFFTView1:CURSor:VBArs:APOSition command.

Description

This command sets or queries the horizontal cursor A position for the specified Math-FFT view.

Usage

Using the .query() method will send the DISplay:MATHFFTView1:CURSor:VBArs:APOSition? query.
Using the .verify(value) method will send the DISplay:MATHFFTView1:CURSor:VBArs:APOSition? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:MATHFFTView1:CURSor:VBArs:APOSition value command.

SCPI Syntax

- DISplay:MATHFFTView1:CURSor:VBArs:APOSition <NR3>
- DISplay:MATHFFTView1:CURSor:VBArs:APOSition?

Info

1 is the Math-FFT waveform number.
<NR3> sets the vertical cursor A position in the specified view.

DisplayMathfftview1CursorVbarsAunits ¶

Bases: SCPICmdRead

The DISplay:MATHFFTView1:CURSor:VBArs:AUNIts command.

Description

This command queries the vertical cursor A measurement units for the specified Math-FFT view.

Usage

Using the .query() method will send the DISplay:MATHFFTView1:CURSor:VBArs:AUNIts? query.
Using the .verify(value) method will send the DISplay:MATHFFTView1:CURSor:VBArs:AUNIts? query and raise an AssertionError if the returned value does not match value.

SCPI Syntax

- DISplay:MATHFFTView1:CURSor:VBArs:AUNIts?

Info

1 is the Math-FFT waveform number.

DisplayMathfftview1CursorVbarsBposition ¶

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:MATHFFTView1:CURSor:VBArs:BPOSition command.

Description

This command sets or queries the vertical cursor B position for the specified Math-FFT view.

Usage

Using the .query() method will send the DISplay:MATHFFTView1:CURSor:VBArs:BPOSition? query.
Using the .verify(value) method will send the DISplay:MATHFFTView1:CURSor:VBArs:BPOSition? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:MATHFFTView1:CURSor:VBArs:BPOSition value command.

SCPI Syntax

- DISplay:MATHFFTView1:CURSor:VBArs:BPOSition <NR3>
- DISplay:MATHFFTView1:CURSor:VBArs:BPOSition?

Info

1 is the Math-FFT waveform number.
<NR3> sets the vertical cursor B position in the specified view.

DisplayMathfftview1CursorVbarsBunits ¶

Bases: SCPICmdRead

The DISplay:MATHFFTView1:CURSor:VBArs:BUNIts command.

Description

This command queries the vertical cursor B measurement units for the specified Math-FFT view.

Usage

Using the .query() method will send the DISplay:MATHFFTView1:CURSor:VBArs:BUNIts? query.
Using the .verify(value) method will send the DISplay:MATHFFTView1:CURSor:VBArs:BUNIts? query and raise an AssertionError if the returned value does not match value.

SCPI Syntax

- DISplay:MATHFFTView1:CURSor:VBArs:BUNIts?

Info

1 is the Math-FFT waveform number.

DisplayMathfftview1CursorVbarsDelta ¶

Bases: SCPICmdRead

The DISplay:MATHFFTView1:CURSor:VBArs:DELTa command.

Description

This command queries the vertical cursor’s delta T readout value for the specified Math-FFT view.

Usage

Using the .query() method will send the DISplay:MATHFFTView1:CURSor:VBArs:DELTa? query.
Using the .verify(value) method will send the DISplay:MATHFFTView1:CURSor:VBArs:DELTa? query and raise an AssertionError if the returned value does not match value.

SCPI Syntax

- DISplay:MATHFFTView1:CURSor:VBArs:DELTa?

Info

1 is the Math-FFT waveform number.

DisplayMathfftview1CursorWaveform ¶

Bases: SCPICmdRead

The DISplay:MATHFFTView1:CURSor:WAVEform command tree.

Usage

Using the .query() method will send the DISplay:MATHFFTView1:CURSor:WAVEform? query.
Using the .verify(value) method will send the DISplay:MATHFFTView1:CURSor:WAVEform? query and raise an AssertionError if the returned value does not match value.

Properties

.aposition: The DISplay:MATHFFTView1:CURSor:WAVEform:APOSition command.
.bposition: The DISplay:MATHFFTView1:CURSor:WAVEform:BPOSition command.

aposition `property` ¶

aposition: DisplayMathfftview1CursorWaveformAposition

Return the DISplay:MATHFFTView1:CURSor:WAVEform:APOSition command.

Description

This command sets or queries the waveform cursor A position for the specified Math-FFT view.

Usage

Using the .query() method will send the DISplay:MATHFFTView1:CURSor:WAVEform:APOSition? query.
Using the .verify(value) method will send the DISplay:MATHFFTView1:CURSor:WAVEform:APOSition? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:MATHFFTView1:CURSor:WAVEform:APOSition value command.

SCPI Syntax

- DISplay:MATHFFTView1:CURSor:WAVEform:APOSition <NR3>
- DISplay:MATHFFTView1:CURSor:WAVEform:APOSition?

Info

1 is the Math-FFT waveform number.
<NR3> is the waveform cursor A position in the specified plot view.

bposition `property` ¶

bposition: DisplayMathfftview1CursorWaveformBposition

Return the DISplay:MATHFFTView1:CURSor:WAVEform:BPOSition command.

Description

This command sets or queries the waveform cursor B position for the specified Math-FFT view.

Usage

Using the .query() method will send the DISplay:MATHFFTView1:CURSor:WAVEform:BPOSition? query.
Using the .verify(value) method will send the DISplay:MATHFFTView1:CURSor:WAVEform:BPOSition? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:MATHFFTView1:CURSor:WAVEform:BPOSition value command.

SCPI Syntax

- DISplay:MATHFFTView1:CURSor:WAVEform:BPOSition <NR3>
- DISplay:MATHFFTView1:CURSor:WAVEform:BPOSition?

Info

1 is the Math-FFT waveform number.
<NR3> is the waveform cursor B position in the specified plot view.

DisplayMathfftview1CursorWaveformAposition ¶

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:MATHFFTView1:CURSor:WAVEform:APOSition command.

Description

This command sets or queries the waveform cursor A position for the specified Math-FFT view.

Usage

Using the .query() method will send the DISplay:MATHFFTView1:CURSor:WAVEform:APOSition? query.
Using the .verify(value) method will send the DISplay:MATHFFTView1:CURSor:WAVEform:APOSition? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:MATHFFTView1:CURSor:WAVEform:APOSition value command.

SCPI Syntax

- DISplay:MATHFFTView1:CURSor:WAVEform:APOSition <NR3>
- DISplay:MATHFFTView1:CURSor:WAVEform:APOSition?

Info

1 is the Math-FFT waveform number.
<NR3> is the waveform cursor A position in the specified plot view.

DisplayMathfftview1CursorWaveformBposition ¶

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:MATHFFTView1:CURSor:WAVEform:BPOSition command.

Description

This command sets or queries the waveform cursor B position for the specified Math-FFT view.

Usage

Using the .query() method will send the DISplay:MATHFFTView1:CURSor:WAVEform:BPOSition? query.
Using the .verify(value) method will send the DISplay:MATHFFTView1:CURSor:WAVEform:BPOSition? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:MATHFFTView1:CURSor:WAVEform:BPOSition value command.

SCPI Syntax

- DISplay:MATHFFTView1:CURSor:WAVEform:BPOSition <NR3>
- DISplay:MATHFFTView1:CURSor:WAVEform:BPOSition?

Info

1 is the Math-FFT waveform number.
<NR3> is the waveform cursor B position in the specified plot view.

DisplayMathfftview1Gridlines ¶

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:MATHFFTView1:GRIDlines command.

Description

This command sets or queries the grid lines setting for the specified Math-FFT view.

Usage

Using the .query() method will send the DISplay:MATHFFTView1:GRIDlines? query.
Using the .verify(value) method will send the DISplay:MATHFFTView1:GRIDlines? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:MATHFFTView1:GRIDlines value command.

SCPI Syntax

- DISplay:MATHFFTView1:GRIDlines {HORizontal|VERTical|BOTH}
- DISplay:MATHFFTView1:GRIDlines?

Info

1 is the Math-FFT waveform number.
HORizontal specifies horizontal grid lines.
VERTical specifies vertical grid lines.
BOTH specifies both vertical and horizontal grid lines.

DisplayMathfftview1Math ¶

Bases: SCPICmdRead

The DISplay:MATHFFTView1:MATH command tree.

Usage

Using the .query() method will send the DISplay:MATHFFTView1:MATH? query.
Using the .verify(value) method will send the DISplay:MATHFFTView1:MATH? query and raise an AssertionError if the returned value does not match value.

Properties

.math: The DISplay:MATHFFTView1:MATH:MATH<x> command tree.

math `property` ¶

math: dict[int, DisplayMathfftview1MathMathItem]

Return the DISplay:MATHFFTView1:MATH:MATH<x> command tree.

Usage

Using the .query() method will send the DISplay:MATHFFTView1:MATH:MATH<x>? query.
Using the .verify(value) method will send the DISplay:MATHFFTView1:MATH:MATH<x>? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.state: The DISplay:MATHFFTView1:MATH:MATH<x>:STATE command.

DisplayMathfftview1MathMathItem ¶

Bases: ValidatedDynamicNumberCmd, SCPICmdRead

The DISplay:MATHFFTView1:MATH:MATH<x> command tree.

Usage

Using the .query() method will send the DISplay:MATHFFTView1:MATH:MATH<x>? query.
Using the .verify(value) method will send the DISplay:MATHFFTView1:MATH:MATH<x>? query and raise an AssertionError if the returned value does not match value.

Properties

.state: The DISplay:MATHFFTView1:MATH:MATH<x>:STATE command.

state `property` ¶

state: DisplayMathfftview1MathMathItemState

Return the DISplay:MATHFFTView1:MATH:MATH<x>:STATE command.

Description

This command sets or queries the display state of the specified math waveform for the specified Math-FFT view.

Usage

Using the .write(value) method will send the DISplay:MATHFFTView1:MATH:MATH<x>:STATE value command.

SCPI Syntax

- DISplay:MATHFFTView1:MATH:MATH<x>:STATE {ON|OFF|<NR1>}

Info

1 is the Math-FFT waveform number.
OFF disables displaying the specified Math-FFT view.
ON enables displaying the specified Math-FFT view.
<NR1> = 0 disables the specified Math-FFT view; any other value enables the specified Math-FFT view.

DisplayMathfftview1MathMathItemState ¶

Bases: SCPICmdWrite

The DISplay:MATHFFTView1:MATH:MATH<x>:STATE command.

Description

This command sets or queries the display state of the specified math waveform for the specified Math-FFT view.

Usage

Using the .write(value) method will send the DISplay:MATHFFTView1:MATH:MATH<x>:STATE value command.

SCPI Syntax

- DISplay:MATHFFTView1:MATH:MATH<x>:STATE {ON|OFF|<NR1>}

Info

1 is the Math-FFT waveform number.
OFF disables displaying the specified Math-FFT view.
ON enables displaying the specified Math-FFT view.
<NR1> = 0 disables the specified Math-FFT view; any other value enables the specified Math-FFT view.

DisplayMathfftview1Xaxis ¶

Bases: SCPICmdRead

The DISplay:MATHFFTView1:XAXIS command tree.

Usage

Using the .query() method will send the DISplay:MATHFFTView1:XAXIS? query.
Using the .verify(value) method will send the DISplay:MATHFFTView1:XAXIS? query and raise an AssertionError if the returned value does not match value.

Properties

.scale: The DISplay:MATHFFTView1:XAXIS:SCALE command.

scale `property` ¶

scale: DisplayMathfftview1XaxisScale

Return the DISplay:MATHFFTView1:XAXIS:SCALE command.

Description

This command sets or queries the x-axis scale (Linear or Log) for the specified Math-FFT view.

Usage

Using the .query() method will send the DISplay:MATHFFTView1:XAXIS:SCALE? query.
Using the .verify(value) method will send the DISplay:MATHFFTView1:XAXIS:SCALE? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:MATHFFTView1:XAXIS:SCALE value command.

SCPI Syntax

- DISplay:MATHFFTView1:XAXIS:SCALE {LINEAr|LOG}
- DISplay:MATHFFTView1:XAXIS:SCALE?

Info

1 is the Math-FFT waveform number.
LINEAr specifies a linear scale.
LOG specifies a logarithmic scale.

DisplayMathfftview1XaxisScale ¶

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:MATHFFTView1:XAXIS:SCALE command.

Description

This command sets or queries the x-axis scale (Linear or Log) for the specified Math-FFT view.

Usage

Using the .query() method will send the DISplay:MATHFFTView1:XAXIS:SCALE? query.
Using the .verify(value) method will send the DISplay:MATHFFTView1:XAXIS:SCALE? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:MATHFFTView1:XAXIS:SCALE value command.

SCPI Syntax

- DISplay:MATHFFTView1:XAXIS:SCALE {LINEAr|LOG}
- DISplay:MATHFFTView1:XAXIS:SCALE?

Info

1 is the Math-FFT waveform number.
LINEAr specifies a linear scale.
LOG specifies a logarithmic scale.

DisplayMathfftview1Yaxis ¶

Bases: SCPICmdRead

The DISplay:MATHFFTView1:YAXIS command tree.

Usage

Using the .query() method will send the DISplay:MATHFFTView1:YAXIS? query.
Using the .verify(value) method will send the DISplay:MATHFFTView1:YAXIS? query and raise an AssertionError if the returned value does not match value.

Properties

.scale: The DISplay:MATHFFTView1:YAXIS:SCALE command.

scale `property` ¶

scale: DisplayMathfftview1YaxisScale

Return the DISplay:MATHFFTView1:YAXIS:SCALE command.

Description

This command sets or queries the vertical scale setting (Linear or dBm) for the specified Math-FFT view.

Usage

Using the .query() method will send the DISplay:MATHFFTView1:YAXIS:SCALE? query.
Using the .verify(value) method will send the DISplay:MATHFFTView1:YAXIS:SCALE? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:MATHFFTView1:YAXIS:SCALE value command.

SCPI Syntax

- DISplay:MATHFFTView1:YAXIS:SCALE {LINEAr|DBM}
- DISplay:MATHFFTView1:YAXIS:SCALE?

Info

1 is the Math-FFT waveform number.
LINEAr specifies a linear scale.
DBM specifies a dBm scale.

DisplayMathfftview1YaxisScale ¶

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:MATHFFTView1:YAXIS:SCALE command.

Description

This command sets or queries the vertical scale setting (Linear or dBm) for the specified Math-FFT view.

Usage

Using the .query() method will send the DISplay:MATHFFTView1:YAXIS:SCALE? query.
Using the .verify(value) method will send the DISplay:MATHFFTView1:YAXIS:SCALE? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:MATHFFTView1:YAXIS:SCALE value command.

SCPI Syntax

- DISplay:MATHFFTView1:YAXIS:SCALE {LINEAr|DBM}
- DISplay:MATHFFTView1:YAXIS:SCALE?

Info

1 is the Math-FFT waveform number.
LINEAr specifies a linear scale.
DBM specifies a dBm scale.

DisplayMathfftview1Zoom ¶

Bases: SCPICmdRead

The DISplay:MATHFFTView1:ZOOM command tree.

Usage

Using the .query() method will send the DISplay:MATHFFTView1:ZOOM? query.
Using the .verify(value) method will send the DISplay:MATHFFTView1:ZOOM? query and raise an AssertionError if the returned value does not match value.

Properties

.xaxis: The DISplay:MATHFFTView1:ZOOM:XAXIS command tree.
.yaxis: The DISplay:MATHFFTView1:ZOOM:YAXIS command tree.

xaxis `property` ¶

xaxis: DisplayMathfftview1ZoomXaxis

Return the DISplay:MATHFFTView1:ZOOM:XAXIS command tree.

Usage

Using the .query() method will send the DISplay:MATHFFTView1:ZOOM:XAXIS? query.
Using the .verify(value) method will send the DISplay:MATHFFTView1:ZOOM:XAXIS? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.from: The DISplay:MATHFFTView1:ZOOM:XAXIS:FROM command.
.to: The DISplay:MATHFFTView1:ZOOM:XAXIS:TO command.

yaxis `property` ¶

yaxis: DisplayMathfftview1ZoomYaxis

Return the DISplay:MATHFFTView1:ZOOM:YAXIS command tree.

Usage

Using the .query() method will send the DISplay:MATHFFTView1:ZOOM:YAXIS? query.
Using the .verify(value) method will send the DISplay:MATHFFTView1:ZOOM:YAXIS? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.from: The DISplay:MATHFFTView1:ZOOM:YAXIS:FROM command.
.to: The DISplay:MATHFFTView1:ZOOM:YAXIS:TO command.

DisplayMathfftview1ZoomXaxis ¶

Bases: SCPICmdRead

The DISplay:MATHFFTView1:ZOOM:XAXIS command tree.

Usage

Using the .query() method will send the DISplay:MATHFFTView1:ZOOM:XAXIS? query.
Using the .verify(value) method will send the DISplay:MATHFFTView1:ZOOM:XAXIS? query and raise an AssertionError if the returned value does not match value.

Properties

.from: The DISplay:MATHFFTView1:ZOOM:XAXIS:FROM command.
.to: The DISplay:MATHFFTView1:ZOOM:XAXIS:TO command.

from_ `property` ¶

from_: DisplayMathfftview1ZoomXaxisFrom

Return the DISplay:MATHFFTView1:ZOOM:XAXIS:FROM command.

Description

This command sets or queries the value of the left edge of the zoom area for the specified Math-FFT view.

Usage

Using the .query() method will send the DISplay:MATHFFTView1:ZOOM:XAXIS:FROM? query.
Using the .verify(value) method will send the DISplay:MATHFFTView1:ZOOM:XAXIS:FROM? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:MATHFFTView1:ZOOM:XAXIS:FROM value command.

SCPI Syntax

- DISplay:MATHFFTView1:ZOOM:XAXIS:FROM <NR3>
- DISplay:MATHFFTView1:ZOOM:XAXIS:FROM?

Info

1 is the Math-FFT waveform number.
<NR3> is the value of the left edge of the zoom x axis in the specified plot view.

to `property` ¶

to: DisplayMathfftview1ZoomXaxisTo

Return the DISplay:MATHFFTView1:ZOOM:XAXIS:TO command.

Description

This command sets or queries the value of the right edge value of the zoom area for the specified Math-FFT view.

Usage

Using the .query() method will send the DISplay:MATHFFTView1:ZOOM:XAXIS:TO? query.
Using the .verify(value) method will send the DISplay:MATHFFTView1:ZOOM:XAXIS:TO? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:MATHFFTView1:ZOOM:XAXIS:TO value command.

SCPI Syntax

- DISplay:MATHFFTView1:ZOOM:XAXIS:TO <NR3>
- DISplay:MATHFFTView1:ZOOM:XAXIS:TO?

Info

1 is the Math-FFT waveform number.
<NR3> is the value of the right edge of the zoom x axis in the specified plot view.

DisplayMathfftview1ZoomXaxisFrom ¶

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:MATHFFTView1:ZOOM:XAXIS:FROM command.

Description

This command sets or queries the value of the left edge of the zoom area for the specified Math-FFT view.

Usage

Using the .query() method will send the DISplay:MATHFFTView1:ZOOM:XAXIS:FROM? query.
Using the .verify(value) method will send the DISplay:MATHFFTView1:ZOOM:XAXIS:FROM? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:MATHFFTView1:ZOOM:XAXIS:FROM value command.

SCPI Syntax

- DISplay:MATHFFTView1:ZOOM:XAXIS:FROM <NR3>
- DISplay:MATHFFTView1:ZOOM:XAXIS:FROM?

Info

1 is the Math-FFT waveform number.
<NR3> is the value of the left edge of the zoom x axis in the specified plot view.

DisplayMathfftview1ZoomXaxisTo ¶

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:MATHFFTView1:ZOOM:XAXIS:TO command.

Description

This command sets or queries the value of the right edge value of the zoom area for the specified Math-FFT view.

Usage

Using the .query() method will send the DISplay:MATHFFTView1:ZOOM:XAXIS:TO? query.
Using the .verify(value) method will send the DISplay:MATHFFTView1:ZOOM:XAXIS:TO? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:MATHFFTView1:ZOOM:XAXIS:TO value command.

SCPI Syntax

- DISplay:MATHFFTView1:ZOOM:XAXIS:TO <NR3>
- DISplay:MATHFFTView1:ZOOM:XAXIS:TO?

Info

1 is the Math-FFT waveform number.
<NR3> is the value of the right edge of the zoom x axis in the specified plot view.

DisplayMathfftview1ZoomYaxis ¶

Bases: SCPICmdRead

The DISplay:MATHFFTView1:ZOOM:YAXIS command tree.

Usage

Using the .query() method will send the DISplay:MATHFFTView1:ZOOM:YAXIS? query.
Using the .verify(value) method will send the DISplay:MATHFFTView1:ZOOM:YAXIS? query and raise an AssertionError if the returned value does not match value.

Properties

.from: The DISplay:MATHFFTView1:ZOOM:YAXIS:FROM command.
.to: The DISplay:MATHFFTView1:ZOOM:YAXIS:TO command.

from_ `property` ¶

from_: DisplayMathfftview1ZoomYaxisFrom

Return the DISplay:MATHFFTView1:ZOOM:YAXIS:FROM command.

Description

This command sets or queries the bottom edge value of the zoom y-axis area for the specified Math-FFT view.

Usage

Using the .query() method will send the DISplay:MATHFFTView1:ZOOM:YAXIS:FROM? query.
Using the .verify(value) method will send the DISplay:MATHFFTView1:ZOOM:YAXIS:FROM? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:MATHFFTView1:ZOOM:YAXIS:FROM value command.

SCPI Syntax

- DISplay:MATHFFTView1:ZOOM:YAXIS:FROM <NR3>
- DISplay:MATHFFTView1:ZOOM:YAXIS:FROM?

Info

1 is the Math-FFT waveform number.
<NR3> is the bottom value of the zoom y axis in the specified plot view.

to `property` ¶

to: DisplayMathfftview1ZoomYaxisTo

Return the DISplay:MATHFFTView1:ZOOM:YAXIS:TO command.

Description

This command sets or queries the top edge value of the zoom y-axis area for the specified Math-FFT view.

Usage

Using the .query() method will send the DISplay:MATHFFTView1:ZOOM:YAXIS:TO? query.
Using the .verify(value) method will send the DISplay:MATHFFTView1:ZOOM:YAXIS:TO? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:MATHFFTView1:ZOOM:YAXIS:TO value command.

SCPI Syntax

- DISplay:MATHFFTView1:ZOOM:YAXIS:TO <NR3>
- DISplay:MATHFFTView1:ZOOM:YAXIS:TO?

Info

1 is the Math-FFT waveform number.
<NR3> is the top value of the zoom y axis in the specified plot view.

DisplayMathfftview1ZoomYaxisFrom ¶

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:MATHFFTView1:ZOOM:YAXIS:FROM command.

Description

This command sets or queries the bottom edge value of the zoom y-axis area for the specified Math-FFT view.

Usage

Using the .query() method will send the DISplay:MATHFFTView1:ZOOM:YAXIS:FROM? query.
Using the .verify(value) method will send the DISplay:MATHFFTView1:ZOOM:YAXIS:FROM? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:MATHFFTView1:ZOOM:YAXIS:FROM value command.

SCPI Syntax

- DISplay:MATHFFTView1:ZOOM:YAXIS:FROM <NR3>
- DISplay:MATHFFTView1:ZOOM:YAXIS:FROM?

Info

1 is the Math-FFT waveform number.
<NR3> is the bottom value of the zoom y axis in the specified plot view.

DisplayMathfftview1ZoomYaxisTo ¶

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:MATHFFTView1:ZOOM:YAXIS:TO command.

Description

This command sets or queries the top edge value of the zoom y-axis area for the specified Math-FFT view.

Usage

Using the .query() method will send the DISplay:MATHFFTView1:ZOOM:YAXIS:TO? query.
Using the .verify(value) method will send the DISplay:MATHFFTView1:ZOOM:YAXIS:TO? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:MATHFFTView1:ZOOM:YAXIS:TO value command.

SCPI Syntax

- DISplay:MATHFFTView1:ZOOM:YAXIS:TO <NR3>
- DISplay:MATHFFTView1:ZOOM:YAXIS:TO?

Info

1 is the Math-FFT waveform number.
<NR3> is the top value of the zoom y axis in the specified plot view.

DisplayMeasItem ¶

Bases: ValidatedDynamicNumberCmd, SCPICmdRead

The DISplay:MEAS<x> command tree.

Usage

Using the .query() method will send the DISplay:MEAS<x>? query.
Using the .verify(value) method will send the DISplay:MEAS<x>? query and raise an AssertionError if the returned value does not match value.

Properties

.navigate: The DISplay:MEAS<x>:NAVIgate command tree.

navigate `property` ¶

navigate: DisplayMeasItemNavigate

Return the DISplay:MEAS<x>:NAVIgate command tree.

Usage

Using the .query() method will send the DISplay:MEAS<x>:NAVIgate? query.
Using the .verify(value) method will send the DISplay:MEAS<x>:NAVIgate? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.type: The DISplay:MEAS<x>:NAVIgate:TYPE command.

DisplayMeasItemNavigate ¶

Bases: SCPICmdRead

The DISplay:MEAS<x>:NAVIgate command tree.

Usage

Using the .query() method will send the DISplay:MEAS<x>:NAVIgate? query.
Using the .verify(value) method will send the DISplay:MEAS<x>:NAVIgate? query and raise an AssertionError if the returned value does not match value.

Properties

.type: The DISplay:MEAS<x>:NAVIgate:TYPE command.

type `property` ¶

type: DisplayMeasItemNavigateType

Return the DISplay:MEAS<x>:NAVIgate:TYPE command.

Description

This command sets or returns the badge navigation type for WBG measurements. Measurements are specified by x.

Usage

Using the .query() method will send the DISplay:MEAS<x>:NAVIgate:TYPE? query.
Using the .verify(value) method will send the DISplay:MEAS<x>:NAVIgate:TYPE? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:MEAS<x>:NAVIgate:TYPE value command.

SCPI Syntax

- DISplay:MEAS<x>:NAVIgate:TYPE {ALLOCCURRENCES|FAILURES}
- DISplay:MEAS<x>:NAVIgate:TYPE?

Info

ALLOCCURRENCES specifies the badge navigation type for WBG measurements as all occurrences.
FAILURES specifies the badge navigation type for WBG measurements as failures.

DisplayMeasItemNavigateType ¶

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:MEAS<x>:NAVIgate:TYPE command.

Description

This command sets or returns the badge navigation type for WBG measurements. Measurements are specified by x.

Usage

Using the .query() method will send the DISplay:MEAS<x>:NAVIgate:TYPE? query.
Using the .verify(value) method will send the DISplay:MEAS<x>:NAVIgate:TYPE? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:MEAS<x>:NAVIgate:TYPE value command.

SCPI Syntax

- DISplay:MEAS<x>:NAVIgate:TYPE {ALLOCCURRENCES|FAILURES}
- DISplay:MEAS<x>:NAVIgate:TYPE?

Info

ALLOCCURRENCES specifies the badge navigation type for WBG measurements as all occurrences.
FAILURES specifies the badge navigation type for WBG measurements as failures.

DisplayPersistence ¶

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:PERSistence command.

Description

This command sets or queries the display persistence for analog waveforms. Persistence is valid for wave views only.

Usage

Using the .query() method will send the DISplay:PERSistence? query.
Using the .verify(value) method will send the DISplay:PERSistence? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:PERSistence value command.

SCPI Syntax

- DISplay:PERSistence {OFF|AUTO|INFPersist|INFInite|VARpersist|CLEAR}
- DISplay:PERSistence?

Info

OFF disables the persistence aspect of the display.
AUTO automatically set the persistence.
INFPersist sets a display mode where any pixels, once touched by samples, remain set until cleared by a mode change.
INFInite sets a display mode where any pixels, once touched by samples, remain set until cleared by a mode change.
VARpersist sets a display mode where set pixels are gradually dimmed.
CLEAR resets the persist time count down and clears the display of acquired points.

Properties

.reset: The DISplay:PERSistence:RESET command.

reset `property` ¶

reset: DisplayPersistenceReset

Return the DISplay:PERSistence:RESET command.

Description

This command controls the clearing of persistence data that has been built up over time. Persistence is valid for wave views only.

Usage

Using the .write() method will send the DISplay:PERSistence:RESET command.

SCPI Syntax

- DISplay:PERSistence:RESET

DisplayPersistenceReset ¶

Bases: SCPICmdWriteNoArguments

The DISplay:PERSistence:RESET command.

Description

This command controls the clearing of persistence data that has been built up over time. Persistence is valid for wave views only.

Usage

Using the .write() method will send the DISplay:PERSistence:RESET command.

SCPI Syntax

- DISplay:PERSistence:RESET

DisplayPlotview1 ¶

Bases: SCPICmdRead

The DISplay:PLOTView1 command tree.

Usage

Using the .query() method will send the DISplay:PLOTView1? query.
Using the .verify(value) method will send the DISplay:PLOTView1? query and raise an AssertionError if the returned value does not match value.

Properties

.autoscale: The DISplay:PLOTView1:AUTOScale command.
.cursor: The DISplay:PLOTView1:CURSor command tree.
.gridlines: The DISplay:PLOTView1:GRIDlines command.
.xaxis: The DISplay:PLOTView1:XAXIS command tree.
.yaxis: The DISplay:PLOTView1:YAXIS command tree.
.zoom: The DISplay:PLOTView1:ZOOM command tree.

autoscale `property` ¶

autoscale: DisplayPlotview1Autoscale

Return the DISplay:PLOTView1:AUTOScale command.

Description

This command sets or queries the enabled state of autoscale for the specified plot.

Usage

Using the .query() method will send the DISplay:PLOTView1:AUTOScale? query.
Using the .verify(value) method will send the DISplay:PLOTView1:AUTOScale? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:PLOTView1:AUTOScale value command.

SCPI Syntax

- DISplay:PLOTView1:AUTOScale {ON|OFF|<NR1>}
- DISplay:PLOTView1:AUTOScale?

Info

1 is the Plot waveform number.
OFF disables the autoscale feature.
ON enables the autoscale feature.
<NR1> = 0 disables the autoscale feature; any other value enables the autoscale feature.

cursor `property` ¶

cursor: DisplayPlotview1Cursor

Return the DISplay:PLOTView1:CURSor command tree.

Usage

Using the .query() method will send the DISplay:PLOTView1:CURSor? query.
Using the .verify(value) method will send the DISplay:PLOTView1:CURSor? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.asource: The DISplay:PLOTView1:CURSor:ASOUrce command.
.bsource: The DISplay:PLOTView1:CURSor:BSOUrce command.
.ddt: The DISplay:PLOTView1:CURSor:DDT command.
.function: The DISplay:PLOTView1:CURSor:FUNCtion command.
.hbars: The DISplay:PLOTView1:CURSor:HBArs command tree.
.mode: The DISplay:PLOTView1:CURSor:MODe command.
.oneoverdeltatvalue: The DISplay:PLOTView1:CURSor:ONEOVERDELTATVALUE command.
.rolocation: The DISplay:PLOTView1:CURSor:ROLOCATION command.
.screen: The DISplay:PLOTView1:CURSor:SCREEN command tree.
.splitmode: The DISplay:PLOTView1:CURSor:SPLITMODE command.
.state: The DISplay:PLOTView1:CURSor:STATE command.
.vbars: The DISplay:PLOTView1:CURSor:VBArs command tree.
.waveform: The DISplay:PLOTView1:CURSor:WAVEform command tree.

gridlines `property` ¶

gridlines: DisplayPlotview1Gridlines

Return the DISplay:PLOTView1:GRIDlines command.

Description

This command sets or queries the Grid (graticule) lines setting of the specified plot. This command works for plots that have vertical and horizontal units associated with the graticule. For example, this command does not work for XY or XYZ plots.

Usage

Using the .query() method will send the DISplay:PLOTView1:GRIDlines? query.
Using the .verify(value) method will send the DISplay:PLOTView1:GRIDlines? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:PLOTView1:GRIDlines value command.

SCPI Syntax

- DISplay:PLOTView1:GRIDlines {HORizontal|VERTical|BOTH}
- DISplay:PLOTView1:GRIDlines?

Info

1 is the Plot waveform number.
HORizontal specifies horizontal grid lines.
VERTical specifies vertical grid lines.
BOTH specifies both vertical and horizontal grid lines.

xaxis `property` ¶

xaxis: DisplayPlotview1Xaxis

Return the DISplay:PLOTView1:XAXIS command tree.

Usage

Using the .query() method will send the DISplay:PLOTView1:XAXIS? query.
Using the .verify(value) method will send the DISplay:PLOTView1:XAXIS? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.scale: The DISplay:PLOTView1:XAXIS:SCALE command.

yaxis `property` ¶

yaxis: DisplayPlotview1Yaxis

Return the DISplay:PLOTView1:YAXIS command tree.

Usage

Using the .query() method will send the DISplay:PLOTView1:YAXIS? query.
Using the .verify(value) method will send the DISplay:PLOTView1:YAXIS? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.scale: The DISplay:PLOTView1:YAXIS:SCALE command.

zoom `property` ¶

zoom: DisplayPlotview1Zoom

Return the DISplay:PLOTView1:ZOOM command tree.

Usage

Using the .query() method will send the DISplay:PLOTView1:ZOOM? query.
Using the .verify(value) method will send the DISplay:PLOTView1:ZOOM? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.xaxis: The DISplay:PLOTView1:ZOOM:XAXIS command tree.
.yaxis: The DISplay:PLOTView1:ZOOM:YAXIS command tree.

DisplayPlotview1Autoscale ¶

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:PLOTView1:AUTOScale command.

Description

This command sets or queries the enabled state of autoscale for the specified plot.

Usage

Using the .query() method will send the DISplay:PLOTView1:AUTOScale? query.
Using the .verify(value) method will send the DISplay:PLOTView1:AUTOScale? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:PLOTView1:AUTOScale value command.

SCPI Syntax

- DISplay:PLOTView1:AUTOScale {ON|OFF|<NR1>}
- DISplay:PLOTView1:AUTOScale?

Info

1 is the Plot waveform number.
OFF disables the autoscale feature.
ON enables the autoscale feature.
<NR1> = 0 disables the autoscale feature; any other value enables the autoscale feature.

DisplayPlotview1Cursor ¶

Bases: SCPICmdRead

The DISplay:PLOTView1:CURSor command tree.

Usage

Using the .query() method will send the DISplay:PLOTView1:CURSor? query.
Using the .verify(value) method will send the DISplay:PLOTView1:CURSor? query and raise an AssertionError if the returned value does not match value.

Properties

.asource: The DISplay:PLOTView1:CURSor:ASOUrce command.
.bsource: The DISplay:PLOTView1:CURSor:BSOUrce command.
.ddt: The DISplay:PLOTView1:CURSor:DDT command.
.function: The DISplay:PLOTView1:CURSor:FUNCtion command.
.hbars: The DISplay:PLOTView1:CURSor:HBArs command tree.
.mode: The DISplay:PLOTView1:CURSor:MODe command.
.oneoverdeltatvalue: The DISplay:PLOTView1:CURSor:ONEOVERDELTATVALUE command.
.rolocation: The DISplay:PLOTView1:CURSor:ROLOCATION command.
.screen: The DISplay:PLOTView1:CURSor:SCREEN command tree.
.splitmode: The DISplay:PLOTView1:CURSor:SPLITMODE command.
.state: The DISplay:PLOTView1:CURSor:STATE command.
.vbars: The DISplay:PLOTView1:CURSor:VBArs command tree.
.waveform: The DISplay:PLOTView1:CURSor:WAVEform command tree.

asource `property` ¶

asource: DisplayPlotview1CursorAsource

Return the DISplay:PLOTView1:CURSor:ASOUrce command.

Description

This command queries the cursor source for plot cursor A.

Usage

Using the .query() method will send the DISplay:PLOTView1:CURSor:ASOUrce? query.
Using the .verify(value) method will send the DISplay:PLOTView1:CURSor:ASOUrce? query and raise an AssertionError if the returned value does not match value.

SCPI Syntax

- DISplay:PLOTView1:CURSor:ASOUrce?

Info

1 is the Plot waveform number.

bsource `property` ¶

bsource: DisplayPlotview1CursorBsource

Return the DISplay:PLOTView1:CURSor:BSOUrce command.

Description

This command queries the cursor source for plot cursor B.

Usage

Using the .query() method will send the DISplay:PLOTView1:CURSor:BSOUrce? query.
Using the .verify(value) method will send the DISplay:PLOTView1:CURSor:BSOUrce? query and raise an AssertionError if the returned value does not match value.

SCPI Syntax

- DISplay:PLOTView1:CURSor:BSOUrce?

Info

1 is the Plot waveform number.

ddt `property` ¶

ddt: DisplayPlotview1CursorDdt

Return the DISplay:PLOTView1:CURSor:DDT command.

Description

This command returns the delta V over delta T cursor readout value for the specified Plot view.

Usage

Using the .query() method will send the DISplay:PLOTView1:CURSor:DDT? query.
Using the .verify(value) method will send the DISplay:PLOTView1:CURSor:DDT? query and raise an AssertionError if the returned value does not match value.

SCPI Syntax

- DISplay:PLOTView1:CURSor:DDT?

Info

1 is the Plot waveform number.

function `property` ¶

function: DisplayPlotview1CursorFunction

Return the DISplay:PLOTView1:CURSor:FUNCtion command.

Description

This command sets or queries the cursor mode for the specified Plot view.

Usage

Using the .query() method will send the DISplay:PLOTView1:CURSor:FUNCtion? query.
Using the .verify(value) method will send the DISplay:PLOTView1:CURSor:FUNCtion? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:PLOTView1:CURSor:FUNCtion value command.

SCPI Syntax

- DISplay:PLOTView1:CURSor:FUNCtion {WAVEFORM|VBArs|HBArs|SCREEN}
- DISplay:PLOTView1:CURSor:FUNCtion?

Info

1 is the Plot waveform number.
WAVEFORM specifies to display the paired cursors in YT display format for measuring waveform amplitude and time.
VBArs specifies vertical bar cursors, which measure in horizontal units.
HBArs specifies horizontal bar cursors, which measure in vertical units.
SCREEN specifies to display both horizontal and vertical bar cursors, which measure the selected waveform in horizontal and vertical units. Use these cursors to measure anywhere in the waveform display area.

hbars `property` ¶

hbars: DisplayPlotview1CursorHbars

Return the DISplay:PLOTView1:CURSor:HBArs command tree.

Usage

Using the .query() method will send the DISplay:PLOTView1:CURSor:HBArs? query.
Using the .verify(value) method will send the DISplay:PLOTView1:CURSor:HBArs? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.aposition: The DISplay:PLOTView1:CURSor:HBArs:APOSition command.
.aunits: The DISplay:PLOTView1:CURSor:HBArs:AUNIts command.
.bposition: The DISplay:PLOTView1:CURSor:HBArs:BPOSition command.
.bunits: The DISplay:PLOTView1:CURSor:HBArs:BUNIts command.
.delta: The DISplay:PLOTView1:CURSor:HBArs:DELTa command.

mode `property` ¶

mode: DisplayPlotview1CursorMode

Return the DISplay:PLOTView1:CURSor:MODe command.

Description

This command sets or queries the cursor tracking mode for the specified Plot view.

Usage

Using the .query() method will send the DISplay:PLOTView1:CURSor:MODe? query.
Using the .verify(value) method will send the DISplay:PLOTView1:CURSor:MODe? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:PLOTView1:CURSor:MODe value command.

SCPI Syntax

- DISplay:PLOTView1:CURSor:MODe {INDEPENDENT|TRACK}
- DISplay:PLOTView1:CURSor:MODe?

Info

1 is the Plot waveform number.
INDEPENDENT allows independent adjustment of the two cursors.
TRACK ties the navigational functionality of the two cursors together. For cursor A adjustments, this ties the movement of the two cursors together; however, cursor B continues to move independently of cursor A.

oneoverdeltatvalue `property` ¶

oneoverdeltatvalue: DisplayPlotview1CursorOneoverdeltatvalue

Return the DISplay:PLOTView1:CURSor:ONEOVERDELTATVALUE command.

Description

This command sets or queries the one over delta T cursor readout value for the specified Plot view.

Usage

Using the .query() method will send the DISplay:PLOTView1:CURSor:ONEOVERDELTATVALUE? query.
Using the .verify(value) method will send the DISplay:PLOTView1:CURSor:ONEOVERDELTATVALUE? query and raise an AssertionError if the returned value does not match value.

SCPI Syntax

- DISplay:PLOTView1:CURSor:ONEOVERDELTATVALUE?

Info

1 is the Plot waveform number.

rolocation `property` ¶

rolocation: DisplayPlotview1CursorRolocation

Return the DISplay:PLOTView1:CURSor:ROLOCATION command.

Description

This command sets or queries the location to display the specified plot cursor readouts (in the plot graticule or in a badge in the Results Bar).

Usage

Using the .query() method will send the DISplay:PLOTView1:CURSor:ROLOCATION? query.
Using the .verify(value) method will send the DISplay:PLOTView1:CURSor:ROLOCATION? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:PLOTView1:CURSor:ROLOCATION value command.

SCPI Syntax

- DISplay:PLOTView1:CURSor:ROLOCATION {GRATICULE|BADGE}
- DISplay:PLOTView1:CURSor:ROLOCATION?

Info

1 is the Plot waveform number.
GRATICULE sets the plot cursor readouts to display as part of the cursors in the plot view.
BADGE removes the plot cursor readouts from the cursors in the graticule and displays the cursor information as a badge in the Results Bar.

screen `property` ¶

screen: DisplayPlotview1CursorScreen

Return the DISplay:PLOTView1:CURSor:SCREEN command tree.

Usage

Using the .query() method will send the DISplay:PLOTView1:CURSor:SCREEN? query.
Using the .verify(value) method will send the DISplay:PLOTView1:CURSor:SCREEN? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.axposition: The DISplay:PLOTView1:CURSor:SCREEN:AXPOSition command.
.ayposition: The DISplay:PLOTView1:CURSor:SCREEN:AYPOSition command.
.bxposition: The DISplay:PLOTView1:CURSor:SCREEN:BXPOSition command.
.byposition: The DISplay:PLOTView1:CURSor:SCREEN:BYPOSition command.

splitmode `property` ¶

splitmode: DisplayPlotview1CursorSplitmode

Return the DISplay:PLOTView1:CURSor:SPLITMODE command.

Description

This command sets or queries the cursor source mode in the specified view.

Usage

Using the .query() method will send the DISplay:PLOTView1:CURSor:SPLITMODE? query.
Using the .verify(value) method will send the DISplay:PLOTView1:CURSor:SPLITMODE? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:PLOTView1:CURSor:SPLITMODE value command.

SCPI Syntax

- DISplay:PLOTView1:CURSor:SPLITMODE {SAME|SPLIT}
- DISplay:PLOTView1:CURSor:SPLITMODE?

Info

1 is the Plot waveform number.
SAME specifies that both cursors are on the same waveform.
SPLIT specifies that the cursors can be on different waveforms.

state `property` ¶

state: DisplayPlotview1CursorState

Return the DISplay:PLOTView1:CURSor:STATE command.

Description

This command sets or queries the visible state of the cursor of the specified cursor in the specified view.

Usage

Using the .query() method will send the DISplay:PLOTView1:CURSor:STATE? query.
Using the .verify(value) method will send the DISplay:PLOTView1:CURSor:STATE? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:PLOTView1:CURSor:STATE value command.

SCPI Syntax

- DISplay:PLOTView1:CURSor:STATE {ON|OFF|<NR1>}
- DISplay:PLOTView1:CURSor:STATE?

Info

1 is the Plot waveform number.
OFF disables the specified cursor.
ON enables the specified cursor.
<NR1> = 0 disables the specified cursor; any other value enables the specified cursor.

vbars `property` ¶

vbars: DisplayPlotview1CursorVbars

Return the DISplay:PLOTView1:CURSor:VBArs command tree.

Usage

Using the .query() method will send the DISplay:PLOTView1:CURSor:VBArs? query.
Using the .verify(value) method will send the DISplay:PLOTView1:CURSor:VBArs? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.aposition: The DISplay:PLOTView1:CURSor:VBArs:APOSition command.
.bposition: The DISplay:PLOTView1:CURSor:VBArs:BPOSition command.
.delta: The DISplay:PLOTView1:CURSor:VBArs:DELTa command.
.units: The DISplay:PLOTView1:CURSor:VBArs:UNIts command.

waveform `property` ¶

waveform: DisplayPlotview1CursorWaveform

Return the DISplay:PLOTView1:CURSor:WAVEform command tree.

Usage

Using the .query() method will send the DISplay:PLOTView1:CURSor:WAVEform? query.
Using the .verify(value) method will send the DISplay:PLOTView1:CURSor:WAVEform? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.aposition: The DISplay:PLOTView1:CURSor:WAVEform:APOSition command.
.bposition: The DISplay:PLOTView1:CURSor:WAVEform:BPOSition command.

DisplayPlotview1CursorAsource ¶

Bases: SCPICmdRead

The DISplay:PLOTView1:CURSor:ASOUrce command.

Description

This command queries the cursor source for plot cursor A.

Usage

Using the .query() method will send the DISplay:PLOTView1:CURSor:ASOUrce? query.
Using the .verify(value) method will send the DISplay:PLOTView1:CURSor:ASOUrce? query and raise an AssertionError if the returned value does not match value.

SCPI Syntax

- DISplay:PLOTView1:CURSor:ASOUrce?

Info

1 is the Plot waveform number.

DisplayPlotview1CursorBsource ¶

Bases: SCPICmdRead

The DISplay:PLOTView1:CURSor:BSOUrce command.

Description

This command queries the cursor source for plot cursor B.

Usage

Using the .query() method will send the DISplay:PLOTView1:CURSor:BSOUrce? query.
Using the .verify(value) method will send the DISplay:PLOTView1:CURSor:BSOUrce? query and raise an AssertionError if the returned value does not match value.

SCPI Syntax

- DISplay:PLOTView1:CURSor:BSOUrce?

Info

1 is the Plot waveform number.

DisplayPlotview1CursorDdt ¶

Bases: SCPICmdRead

The DISplay:PLOTView1:CURSor:DDT command.

Description

This command returns the delta V over delta T cursor readout value for the specified Plot view.

Usage

Using the .query() method will send the DISplay:PLOTView1:CURSor:DDT? query.
Using the .verify(value) method will send the DISplay:PLOTView1:CURSor:DDT? query and raise an AssertionError if the returned value does not match value.

SCPI Syntax

- DISplay:PLOTView1:CURSor:DDT?

Info

1 is the Plot waveform number.

DisplayPlotview1CursorFunction ¶

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:PLOTView1:CURSor:FUNCtion command.

Description

This command sets or queries the cursor mode for the specified Plot view.

Usage

Using the .query() method will send the DISplay:PLOTView1:CURSor:FUNCtion? query.
Using the .verify(value) method will send the DISplay:PLOTView1:CURSor:FUNCtion? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:PLOTView1:CURSor:FUNCtion value command.

SCPI Syntax

- DISplay:PLOTView1:CURSor:FUNCtion {WAVEFORM|VBArs|HBArs|SCREEN}
- DISplay:PLOTView1:CURSor:FUNCtion?

Info

1 is the Plot waveform number.
WAVEFORM specifies to display the paired cursors in YT display format for measuring waveform amplitude and time.
VBArs specifies vertical bar cursors, which measure in horizontal units.
HBArs specifies horizontal bar cursors, which measure in vertical units.
SCREEN specifies to display both horizontal and vertical bar cursors, which measure the selected waveform in horizontal and vertical units. Use these cursors to measure anywhere in the waveform display area.

DisplayPlotview1CursorHbars ¶

Bases: SCPICmdRead

The DISplay:PLOTView1:CURSor:HBArs command tree.

Usage

Using the .query() method will send the DISplay:PLOTView1:CURSor:HBArs? query.
Using the .verify(value) method will send the DISplay:PLOTView1:CURSor:HBArs? query and raise an AssertionError if the returned value does not match value.

Properties

.aposition: The DISplay:PLOTView1:CURSor:HBArs:APOSition command.
.aunits: The DISplay:PLOTView1:CURSor:HBArs:AUNIts command.
.bposition: The DISplay:PLOTView1:CURSor:HBArs:BPOSition command.
.bunits: The DISplay:PLOTView1:CURSor:HBArs:BUNIts command.
.delta: The DISplay:PLOTView1:CURSor:HBArs:DELTa command.

aposition `property` ¶

aposition: DisplayPlotview1CursorHbarsAposition

Return the DISplay:PLOTView1:CURSor:HBArs:APOSition command.

Description

This command sets or queries the horizontal cursor A position for the specified Plot view.

Usage

Using the .query() method will send the DISplay:PLOTView1:CURSor:HBArs:APOSition? query.
Using the .verify(value) method will send the DISplay:PLOTView1:CURSor:HBArs:APOSition? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:PLOTView1:CURSor:HBArs:APOSition value command.

SCPI Syntax

- DISplay:PLOTView1:CURSor:HBArs:APOSition <NR3>
- DISplay:PLOTView1:CURSor:HBArs:APOSition?

Info

1 is the Plot waveform number.
<NR3> is the cursor position.

aunits `property` ¶

aunits: DisplayPlotview1CursorHbarsAunits

Return the DISplay:PLOTView1:CURSor:HBArs:AUNIts command.

Description

This command queries the horizontal cursor A vertical units for the specified Plot view.

Usage

Using the .query() method will send the DISplay:PLOTView1:CURSor:HBArs:AUNIts? query.
Using the .verify(value) method will send the DISplay:PLOTView1:CURSor:HBArs:AUNIts? query and raise an AssertionError if the returned value does not match value.

SCPI Syntax

- DISplay:PLOTView1:CURSor:HBArs:AUNIts?

bposition `property` ¶

bposition: DisplayPlotview1CursorHbarsBposition

Return the DISplay:PLOTView1:CURSor:HBArs:BPOSition command.

Description

This command sets or queries the horizontal cursor B position for the specified Plot view.

Usage

Using the .query() method will send the DISplay:PLOTView1:CURSor:HBArs:BPOSition? query.
Using the .verify(value) method will send the DISplay:PLOTView1:CURSor:HBArs:BPOSition? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:PLOTView1:CURSor:HBArs:BPOSition value command.

SCPI Syntax

- DISplay:PLOTView1:CURSor:HBArs:BPOSition <NR3>
- DISplay:PLOTView1:CURSor:HBArs:BPOSition?

Info

1 is the Plot waveform number.
<NR3> is the HBArs vertical position.

bunits `property` ¶

bunits: DisplayPlotview1CursorHbarsBunits

Return the DISplay:PLOTView1:CURSor:HBArs:BUNIts command.

Description

This command queries the cursor B vertical units for the specified Plot view.

Usage

Using the .query() method will send the DISplay:PLOTView1:CURSor:HBArs:BUNIts? query.
Using the .verify(value) method will send the DISplay:PLOTView1:CURSor:HBArs:BUNIts? query and raise an AssertionError if the returned value does not match value.

SCPI Syntax

- DISplay:PLOTView1:CURSor:HBArs:BUNIts?

Info

1 is the Plot waveform number.

delta `property` ¶

delta: DisplayPlotview1CursorHbarsDelta

Return the DISplay:PLOTView1:CURSor:HBArs:DELTa command.

Description

This command queries the delta V cursor readout value for the specified Plot view.

Usage

Using the .query() method will send the DISplay:PLOTView1:CURSor:HBArs:DELTa? query.
Using the .verify(value) method will send the DISplay:PLOTView1:CURSor:HBArs:DELTa? query and raise an AssertionError if the returned value does not match value.

SCPI Syntax

- DISplay:PLOTView1:CURSor:HBArs:DELTa?

Info

1 is the Plot waveform number.

DisplayPlotview1CursorHbarsAposition ¶

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:PLOTView1:CURSor:HBArs:APOSition command.

Description

This command sets or queries the horizontal cursor A position for the specified Plot view.

Usage

Using the .query() method will send the DISplay:PLOTView1:CURSor:HBArs:APOSition? query.
Using the .verify(value) method will send the DISplay:PLOTView1:CURSor:HBArs:APOSition? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:PLOTView1:CURSor:HBArs:APOSition value command.

SCPI Syntax

- DISplay:PLOTView1:CURSor:HBArs:APOSition <NR3>
- DISplay:PLOTView1:CURSor:HBArs:APOSition?

Info

1 is the Plot waveform number.
<NR3> is the cursor position.

DisplayPlotview1CursorHbarsAunits ¶

Bases: SCPICmdRead

The DISplay:PLOTView1:CURSor:HBArs:AUNIts command.

Description

This command queries the horizontal cursor A vertical units for the specified Plot view.

Usage

Using the .query() method will send the DISplay:PLOTView1:CURSor:HBArs:AUNIts? query.
Using the .verify(value) method will send the DISplay:PLOTView1:CURSor:HBArs:AUNIts? query and raise an AssertionError if the returned value does not match value.

SCPI Syntax

- DISplay:PLOTView1:CURSor:HBArs:AUNIts?

DisplayPlotview1CursorHbarsBposition ¶

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:PLOTView1:CURSor:HBArs:BPOSition command.

Description

This command sets or queries the horizontal cursor B position for the specified Plot view.

Usage

Using the .query() method will send the DISplay:PLOTView1:CURSor:HBArs:BPOSition? query.
Using the .verify(value) method will send the DISplay:PLOTView1:CURSor:HBArs:BPOSition? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:PLOTView1:CURSor:HBArs:BPOSition value command.

SCPI Syntax

- DISplay:PLOTView1:CURSor:HBArs:BPOSition <NR3>
- DISplay:PLOTView1:CURSor:HBArs:BPOSition?

Info

1 is the Plot waveform number.
<NR3> is the HBArs vertical position.

DisplayPlotview1CursorHbarsBunits ¶

Bases: SCPICmdRead

The DISplay:PLOTView1:CURSor:HBArs:BUNIts command.

Description

This command queries the cursor B vertical units for the specified Plot view.

Usage

Using the .query() method will send the DISplay:PLOTView1:CURSor:HBArs:BUNIts? query.
Using the .verify(value) method will send the DISplay:PLOTView1:CURSor:HBArs:BUNIts? query and raise an AssertionError if the returned value does not match value.

SCPI Syntax

- DISplay:PLOTView1:CURSor:HBArs:BUNIts?

Info

1 is the Plot waveform number.

DisplayPlotview1CursorHbarsDelta ¶

Bases: SCPICmdRead

The DISplay:PLOTView1:CURSor:HBArs:DELTa command.

Description

This command queries the delta V cursor readout value for the specified Plot view.

Usage

Using the .query() method will send the DISplay:PLOTView1:CURSor:HBArs:DELTa? query.
Using the .verify(value) method will send the DISplay:PLOTView1:CURSor:HBArs:DELTa? query and raise an AssertionError if the returned value does not match value.

SCPI Syntax

- DISplay:PLOTView1:CURSor:HBArs:DELTa?

Info

1 is the Plot waveform number.

DisplayPlotview1CursorMode ¶

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:PLOTView1:CURSor:MODe command.

Description

This command sets or queries the cursor tracking mode for the specified Plot view.

Usage

Using the .query() method will send the DISplay:PLOTView1:CURSor:MODe? query.
Using the .verify(value) method will send the DISplay:PLOTView1:CURSor:MODe? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:PLOTView1:CURSor:MODe value command.

SCPI Syntax

- DISplay:PLOTView1:CURSor:MODe {INDEPENDENT|TRACK}
- DISplay:PLOTView1:CURSor:MODe?

Info

1 is the Plot waveform number.
INDEPENDENT allows independent adjustment of the two cursors.
TRACK ties the navigational functionality of the two cursors together. For cursor A adjustments, this ties the movement of the two cursors together; however, cursor B continues to move independently of cursor A.

DisplayPlotview1CursorOneoverdeltatvalue ¶

Bases: SCPICmdRead

The DISplay:PLOTView1:CURSor:ONEOVERDELTATVALUE command.

Description

This command sets or queries the one over delta T cursor readout value for the specified Plot view.

Usage

Using the .query() method will send the DISplay:PLOTView1:CURSor:ONEOVERDELTATVALUE? query.
Using the .verify(value) method will send the DISplay:PLOTView1:CURSor:ONEOVERDELTATVALUE? query and raise an AssertionError if the returned value does not match value.

SCPI Syntax

- DISplay:PLOTView1:CURSor:ONEOVERDELTATVALUE?

Info

1 is the Plot waveform number.

DisplayPlotview1CursorRolocation ¶

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:PLOTView1:CURSor:ROLOCATION command.

Description

This command sets or queries the location to display the specified plot cursor readouts (in the plot graticule or in a badge in the Results Bar).

Usage

Using the .query() method will send the DISplay:PLOTView1:CURSor:ROLOCATION? query.
Using the .verify(value) method will send the DISplay:PLOTView1:CURSor:ROLOCATION? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:PLOTView1:CURSor:ROLOCATION value command.

SCPI Syntax

- DISplay:PLOTView1:CURSor:ROLOCATION {GRATICULE|BADGE}
- DISplay:PLOTView1:CURSor:ROLOCATION?

Info

1 is the Plot waveform number.
GRATICULE sets the plot cursor readouts to display as part of the cursors in the plot view.
BADGE removes the plot cursor readouts from the cursors in the graticule and displays the cursor information as a badge in the Results Bar.

DisplayPlotview1CursorScreen ¶

Bases: SCPICmdRead

The DISplay:PLOTView1:CURSor:SCREEN command tree.

Usage

Using the .query() method will send the DISplay:PLOTView1:CURSor:SCREEN? query.
Using the .verify(value) method will send the DISplay:PLOTView1:CURSor:SCREEN? query and raise an AssertionError if the returned value does not match value.

Properties

.axposition: The DISplay:PLOTView1:CURSor:SCREEN:AXPOSition command.
.ayposition: The DISplay:PLOTView1:CURSor:SCREEN:AYPOSition command.
.bxposition: The DISplay:PLOTView1:CURSor:SCREEN:BXPOSition command.
.byposition: The DISplay:PLOTView1:CURSor:SCREEN:BYPOSition command.

axposition `property` ¶

axposition: DisplayPlotview1CursorScreenAxposition

Return the DISplay:PLOTView1:CURSor:SCREEN:AXPOSition command.

Description

This command sets or queries the horizontal cursor A position of the specified cursor in the specified view.

Usage

Using the .query() method will send the DISplay:PLOTView1:CURSor:SCREEN:AXPOSition? query.
Using the .verify(value) method will send the DISplay:PLOTView1:CURSor:SCREEN:AXPOSition? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:PLOTView1:CURSor:SCREEN:AXPOSition value command.

SCPI Syntax

- DISplay:PLOTView1:CURSor:SCREEN:AXPOSition <NR3>
- DISplay:PLOTView1:CURSor:SCREEN:AXPOSition?

Info

1 is the Plot waveform number.
<NR3> is the horizontal cursor A position.

ayposition `property` ¶

ayposition: DisplayPlotview1CursorScreenAyposition

Return the DISplay:PLOTView1:CURSor:SCREEN:AYPOSition command.

Description

This command sets or queries the vertical cursor A position of the specified cursor in the specified view.

Usage

Using the .query() method will send the DISplay:PLOTView1:CURSor:SCREEN:AYPOSition? query.
Using the .verify(value) method will send the DISplay:PLOTView1:CURSor:SCREEN:AYPOSition? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:PLOTView1:CURSor:SCREEN:AYPOSition value command.

SCPI Syntax

- DISplay:PLOTView1:CURSor:SCREEN:AYPOSition <NR3>
- DISplay:PLOTView1:CURSor:SCREEN:AYPOSition?

Info

1 is the Plot waveform number.
<NR3> is the vertical cursor A position.

bxposition `property` ¶

bxposition: DisplayPlotview1CursorScreenBxposition

Return the DISplay:PLOTView1:CURSor:SCREEN:BXPOSition command.

Description

This command sets or queries the horizontal cursor B position of the specified cursor in the specified view.

Usage

Using the .query() method will send the DISplay:PLOTView1:CURSor:SCREEN:BXPOSition? query.
Using the .verify(value) method will send the DISplay:PLOTView1:CURSor:SCREEN:BXPOSition? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:PLOTView1:CURSor:SCREEN:BXPOSition value command.

SCPI Syntax

- DISplay:PLOTView1:CURSor:SCREEN:BXPOSition <NR3>
- DISplay:PLOTView1:CURSor:SCREEN:BXPOSition?

Info

1 is the Plot waveform number.
<NR3> is the horizontal cursor B position.

byposition `property` ¶

byposition: DisplayPlotview1CursorScreenByposition

Return the DISplay:PLOTView1:CURSor:SCREEN:BYPOSition command.

Description

This command sets or queries the vertical cursor B position of the specified cursor in the specified view.

Usage

Using the .query() method will send the DISplay:PLOTView1:CURSor:SCREEN:BYPOSition? query.
Using the .verify(value) method will send the DISplay:PLOTView1:CURSor:SCREEN:BYPOSition? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:PLOTView1:CURSor:SCREEN:BYPOSition value command.

SCPI Syntax

- DISplay:PLOTView1:CURSor:SCREEN:BYPOSition <NR3>
- DISplay:PLOTView1:CURSor:SCREEN:BYPOSition?

Info

1 is the Plot waveform number.
<NR3> is the vertical cursor B position.

DisplayPlotview1CursorScreenAxposition ¶

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:PLOTView1:CURSor:SCREEN:AXPOSition command.

Description

This command sets or queries the horizontal cursor A position of the specified cursor in the specified view.

Usage

Using the .query() method will send the DISplay:PLOTView1:CURSor:SCREEN:AXPOSition? query.
Using the .verify(value) method will send the DISplay:PLOTView1:CURSor:SCREEN:AXPOSition? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:PLOTView1:CURSor:SCREEN:AXPOSition value command.

SCPI Syntax

- DISplay:PLOTView1:CURSor:SCREEN:AXPOSition <NR3>
- DISplay:PLOTView1:CURSor:SCREEN:AXPOSition?

Info

1 is the Plot waveform number.
<NR3> is the horizontal cursor A position.

DisplayPlotview1CursorScreenAyposition ¶

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:PLOTView1:CURSor:SCREEN:AYPOSition command.

Description

This command sets or queries the vertical cursor A position of the specified cursor in the specified view.

Usage

Using the .query() method will send the DISplay:PLOTView1:CURSor:SCREEN:AYPOSition? query.
Using the .verify(value) method will send the DISplay:PLOTView1:CURSor:SCREEN:AYPOSition? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:PLOTView1:CURSor:SCREEN:AYPOSition value command.

SCPI Syntax

- DISplay:PLOTView1:CURSor:SCREEN:AYPOSition <NR3>
- DISplay:PLOTView1:CURSor:SCREEN:AYPOSition?

Info

1 is the Plot waveform number.
<NR3> is the vertical cursor A position.

DisplayPlotview1CursorScreenBxposition ¶

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:PLOTView1:CURSor:SCREEN:BXPOSition command.

Description

This command sets or queries the horizontal cursor B position of the specified cursor in the specified view.

Usage

Using the .query() method will send the DISplay:PLOTView1:CURSor:SCREEN:BXPOSition? query.
Using the .verify(value) method will send the DISplay:PLOTView1:CURSor:SCREEN:BXPOSition? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:PLOTView1:CURSor:SCREEN:BXPOSition value command.

SCPI Syntax

- DISplay:PLOTView1:CURSor:SCREEN:BXPOSition <NR3>
- DISplay:PLOTView1:CURSor:SCREEN:BXPOSition?

Info

1 is the Plot waveform number.
<NR3> is the horizontal cursor B position.

DisplayPlotview1CursorScreenByposition ¶

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:PLOTView1:CURSor:SCREEN:BYPOSition command.

Description

This command sets or queries the vertical cursor B position of the specified cursor in the specified view.

Usage

Using the .query() method will send the DISplay:PLOTView1:CURSor:SCREEN:BYPOSition? query.
Using the .verify(value) method will send the DISplay:PLOTView1:CURSor:SCREEN:BYPOSition? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:PLOTView1:CURSor:SCREEN:BYPOSition value command.

SCPI Syntax

- DISplay:PLOTView1:CURSor:SCREEN:BYPOSition <NR3>
- DISplay:PLOTView1:CURSor:SCREEN:BYPOSition?

Info

1 is the Plot waveform number.
<NR3> is the vertical cursor B position.

DisplayPlotview1CursorSplitmode ¶

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:PLOTView1:CURSor:SPLITMODE command.

Description

This command sets or queries the cursor source mode in the specified view.

Usage

Using the .query() method will send the DISplay:PLOTView1:CURSor:SPLITMODE? query.
Using the .verify(value) method will send the DISplay:PLOTView1:CURSor:SPLITMODE? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:PLOTView1:CURSor:SPLITMODE value command.

SCPI Syntax

- DISplay:PLOTView1:CURSor:SPLITMODE {SAME|SPLIT}
- DISplay:PLOTView1:CURSor:SPLITMODE?

Info

1 is the Plot waveform number.
SAME specifies that both cursors are on the same waveform.
SPLIT specifies that the cursors can be on different waveforms.

DisplayPlotview1CursorState ¶

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:PLOTView1:CURSor:STATE command.

Description

This command sets or queries the visible state of the cursor of the specified cursor in the specified view.

Usage

Using the .query() method will send the DISplay:PLOTView1:CURSor:STATE? query.
Using the .verify(value) method will send the DISplay:PLOTView1:CURSor:STATE? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:PLOTView1:CURSor:STATE value command.

SCPI Syntax

- DISplay:PLOTView1:CURSor:STATE {ON|OFF|<NR1>}
- DISplay:PLOTView1:CURSor:STATE?

Info

1 is the Plot waveform number.
OFF disables the specified cursor.
ON enables the specified cursor.
<NR1> = 0 disables the specified cursor; any other value enables the specified cursor.

DisplayPlotview1CursorVbars ¶

Bases: SCPICmdRead

The DISplay:PLOTView1:CURSor:VBArs command tree.

Usage

Using the .query() method will send the DISplay:PLOTView1:CURSor:VBArs? query.
Using the .verify(value) method will send the DISplay:PLOTView1:CURSor:VBArs? query and raise an AssertionError if the returned value does not match value.

Properties

.aposition: The DISplay:PLOTView1:CURSor:VBArs:APOSition command.
.bposition: The DISplay:PLOTView1:CURSor:VBArs:BPOSition command.
.delta: The DISplay:PLOTView1:CURSor:VBArs:DELTa command.
.units: The DISplay:PLOTView1:CURSor:VBArs:UNIts command.

aposition `property` ¶

aposition: DisplayPlotview1CursorVbarsAposition

Return the DISplay:PLOTView1:CURSor:VBArs:APOSition command.

Description

This command sets or queries the vertical cursor A position of the specified cursor in the specified view.

Usage

Using the .query() method will send the DISplay:PLOTView1:CURSor:VBArs:APOSition? query.
Using the .verify(value) method will send the DISplay:PLOTView1:CURSor:VBArs:APOSition? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:PLOTView1:CURSor:VBArs:APOSition value command.

SCPI Syntax

- DISplay:PLOTView1:CURSor:VBArs:APOSition <NR3>
- DISplay:PLOTView1:CURSor:VBArs:APOSition?

Info

1 is the Plot waveform number.
<NR3> is the vertical cursor A position.

bposition `property` ¶

bposition: DisplayPlotview1CursorVbarsBposition

Return the DISplay:PLOTView1:CURSor:VBArs:BPOSition command.

Description

This command sets or queries the vertical cursor B position of the specified cursor in the specified view.

Usage

Using the .query() method will send the DISplay:PLOTView1:CURSor:VBArs:BPOSition? query.
Using the .verify(value) method will send the DISplay:PLOTView1:CURSor:VBArs:BPOSition? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:PLOTView1:CURSor:VBArs:BPOSition value command.

SCPI Syntax

- DISplay:PLOTView1:CURSor:VBArs:BPOSition <NR3>
- DISplay:PLOTView1:CURSor:VBArs:BPOSition?

Info

1 is the Plot waveform number.
<NR3> is the vertical cursor B position.

delta `property` ¶

delta: DisplayPlotview1CursorVbarsDelta

Return the DISplay:PLOTView1:CURSor:VBArs:DELTa command.

Description

This command queries the delta T cursor readout value of the specified cursor in the specified view.

Usage

Using the .query() method will send the DISplay:PLOTView1:CURSor:VBArs:DELTa? query.
Using the .verify(value) method will send the DISplay:PLOTView1:CURSor:VBArs:DELTa? query and raise an AssertionError if the returned value does not match value.

SCPI Syntax

- DISplay:PLOTView1:CURSor:VBArs:DELTa?

Info

1 is the Plot waveform number.

units `property` ¶

units: DisplayPlotview1CursorVbarsUnits

Return the DISplay:PLOTView1:CURSor:VBArs:UNIts command.

Description

This command queries the VBArs cursor readout units of the specified cursor in the specified view.

Usage

Using the .query() method will send the DISplay:PLOTView1:CURSor:VBArs:UNIts? query.
Using the .verify(value) method will send the DISplay:PLOTView1:CURSor:VBArs:UNIts? query and raise an AssertionError if the returned value does not match value.

SCPI Syntax

- DISplay:PLOTView1:CURSor:VBArs:UNIts?

Info

1 is the Plot waveform number.

DisplayPlotview1CursorVbarsAposition ¶

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:PLOTView1:CURSor:VBArs:APOSition command.

Description

This command sets or queries the vertical cursor A position of the specified cursor in the specified view.

Usage

Using the .query() method will send the DISplay:PLOTView1:CURSor:VBArs:APOSition? query.
Using the .verify(value) method will send the DISplay:PLOTView1:CURSor:VBArs:APOSition? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:PLOTView1:CURSor:VBArs:APOSition value command.

SCPI Syntax

- DISplay:PLOTView1:CURSor:VBArs:APOSition <NR3>
- DISplay:PLOTView1:CURSor:VBArs:APOSition?

Info

1 is the Plot waveform number.
<NR3> is the vertical cursor A position.

DisplayPlotview1CursorVbarsBposition ¶

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:PLOTView1:CURSor:VBArs:BPOSition command.

Description

This command sets or queries the vertical cursor B position of the specified cursor in the specified view.

Usage

Using the .query() method will send the DISplay:PLOTView1:CURSor:VBArs:BPOSition? query.
Using the .verify(value) method will send the DISplay:PLOTView1:CURSor:VBArs:BPOSition? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:PLOTView1:CURSor:VBArs:BPOSition value command.

SCPI Syntax

- DISplay:PLOTView1:CURSor:VBArs:BPOSition <NR3>
- DISplay:PLOTView1:CURSor:VBArs:BPOSition?

Info

1 is the Plot waveform number.
<NR3> is the vertical cursor B position.

DisplayPlotview1CursorVbarsDelta ¶

Bases: SCPICmdRead

The DISplay:PLOTView1:CURSor:VBArs:DELTa command.

Description

This command queries the delta T cursor readout value of the specified cursor in the specified view.

Usage

Using the .query() method will send the DISplay:PLOTView1:CURSor:VBArs:DELTa? query.
Using the .verify(value) method will send the DISplay:PLOTView1:CURSor:VBArs:DELTa? query and raise an AssertionError if the returned value does not match value.

SCPI Syntax

- DISplay:PLOTView1:CURSor:VBArs:DELTa?

Info

1 is the Plot waveform number.

DisplayPlotview1CursorVbarsUnits ¶

Bases: SCPICmdRead

The DISplay:PLOTView1:CURSor:VBArs:UNIts command.

Description

This command queries the VBArs cursor readout units of the specified cursor in the specified view.

Usage

Using the .query() method will send the DISplay:PLOTView1:CURSor:VBArs:UNIts? query.
Using the .verify(value) method will send the DISplay:PLOTView1:CURSor:VBArs:UNIts? query and raise an AssertionError if the returned value does not match value.

SCPI Syntax

- DISplay:PLOTView1:CURSor:VBArs:UNIts?

Info

1 is the Plot waveform number.

DisplayPlotview1CursorWaveform ¶

Bases: SCPICmdRead

The DISplay:PLOTView1:CURSor:WAVEform command tree.

Usage

Using the .query() method will send the DISplay:PLOTView1:CURSor:WAVEform? query.
Using the .verify(value) method will send the DISplay:PLOTView1:CURSor:WAVEform? query and raise an AssertionError if the returned value does not match value.

Properties

.aposition: The DISplay:PLOTView1:CURSor:WAVEform:APOSition command.
.bposition: The DISplay:PLOTView1:CURSor:WAVEform:BPOSition command.

aposition `property` ¶

aposition: DisplayPlotview1CursorWaveformAposition

Return the DISplay:PLOTView1:CURSor:WAVEform:APOSition command.

Description

This command sets or queries the waveform cursor A horizontal position of the specified cursor in the specified view. NOTE : In case of XY plot, this command has no effect when used to set the value. Incase of bathtub plot, this command sets or returns the cursor A vertical position. For all other plots, this command sets or returns the cursor A horizontal position.

Usage

Using the .query() method will send the DISplay:PLOTView1:CURSor:WAVEform:APOSition? query.
Using the .verify(value) method will send the DISplay:PLOTView1:CURSor:WAVEform:APOSition? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:PLOTView1:CURSor:WAVEform:APOSition value command.

SCPI Syntax

- DISplay:PLOTView1:CURSor:WAVEform:APOSition <NR3>
- DISplay:PLOTView1:CURSor:WAVEform:APOSition?

Info

1 is the Plot waveform number.
<NR3> is the horizontal cursor A position.

bposition `property` ¶

bposition: DisplayPlotview1CursorWaveformBposition

Return the DISplay:PLOTView1:CURSor:WAVEform:BPOSition command.

Description

This command sets or queries the waveform cursor B horizontal position of the specified cursor in the specified view. NOTE : In case of XY plot, this command has no effect when used to set the value. Incase of bathtub plot, this command has no effect. Query returns invalid values. For all other plots, this command sets or returns the cursor B horizontal position.

Usage

Using the .query() method will send the DISplay:PLOTView1:CURSor:WAVEform:BPOSition? query.
Using the .verify(value) method will send the DISplay:PLOTView1:CURSor:WAVEform:BPOSition? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:PLOTView1:CURSor:WAVEform:BPOSition value command.

SCPI Syntax

- DISplay:PLOTView1:CURSor:WAVEform:BPOSition <NR3>
- DISplay:PLOTView1:CURSor:WAVEform:BPOSition?

Info

1 is the Plot waveform number.
<NR3> is the horizontal cursor B position.

DisplayPlotview1CursorWaveformAposition ¶

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:PLOTView1:CURSor:WAVEform:APOSition command.

Description

This command sets or queries the waveform cursor A horizontal position of the specified cursor in the specified view. NOTE : In case of XY plot, this command has no effect when used to set the value. Incase of bathtub plot, this command sets or returns the cursor A vertical position. For all other plots, this command sets or returns the cursor A horizontal position.

Usage

Using the .query() method will send the DISplay:PLOTView1:CURSor:WAVEform:APOSition? query.
Using the .verify(value) method will send the DISplay:PLOTView1:CURSor:WAVEform:APOSition? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:PLOTView1:CURSor:WAVEform:APOSition value command.

SCPI Syntax

- DISplay:PLOTView1:CURSor:WAVEform:APOSition <NR3>
- DISplay:PLOTView1:CURSor:WAVEform:APOSition?

Info

1 is the Plot waveform number.
<NR3> is the horizontal cursor A position.

DisplayPlotview1CursorWaveformBposition ¶

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:PLOTView1:CURSor:WAVEform:BPOSition command.

Description

This command sets or queries the waveform cursor B horizontal position of the specified cursor in the specified view. NOTE : In case of XY plot, this command has no effect when used to set the value. Incase of bathtub plot, this command has no effect. Query returns invalid values. For all other plots, this command sets or returns the cursor B horizontal position.

Usage

Using the .query() method will send the DISplay:PLOTView1:CURSor:WAVEform:BPOSition? query.
Using the .verify(value) method will send the DISplay:PLOTView1:CURSor:WAVEform:BPOSition? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:PLOTView1:CURSor:WAVEform:BPOSition value command.

SCPI Syntax

- DISplay:PLOTView1:CURSor:WAVEform:BPOSition <NR3>
- DISplay:PLOTView1:CURSor:WAVEform:BPOSition?

Info

1 is the Plot waveform number.
<NR3> is the horizontal cursor B position.

DisplayPlotview1Gridlines ¶

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:PLOTView1:GRIDlines command.

Description

This command sets or queries the Grid (graticule) lines setting of the specified plot. This command works for plots that have vertical and horizontal units associated with the graticule. For example, this command does not work for XY or XYZ plots.

Usage

Using the .query() method will send the DISplay:PLOTView1:GRIDlines? query.
Using the .verify(value) method will send the DISplay:PLOTView1:GRIDlines? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:PLOTView1:GRIDlines value command.

SCPI Syntax

- DISplay:PLOTView1:GRIDlines {HORizontal|VERTical|BOTH}
- DISplay:PLOTView1:GRIDlines?

Info

1 is the Plot waveform number.
HORizontal specifies horizontal grid lines.
VERTical specifies vertical grid lines.
BOTH specifies both vertical and horizontal grid lines.

DisplayPlotview1Xaxis ¶

Bases: SCPICmdRead

The DISplay:PLOTView1:XAXIS command tree.

Usage

Using the .query() method will send the DISplay:PLOTView1:XAXIS? query.
Using the .verify(value) method will send the DISplay:PLOTView1:XAXIS? query and raise an AssertionError if the returned value does not match value.

Properties

.scale: The DISplay:PLOTView1:XAXIS:SCALE command.

scale `property` ¶

scale: DisplayPlotview1XaxisScale

Return the DISplay:PLOTView1:XAXIS:SCALE command.

Description

This command sets or queries the horizontal scale setting for applicable plots (Linear or Log) for the specified plot view.

Usage

Using the .write(value) method will send the DISplay:PLOTView1:XAXIS:SCALE value command.

SCPI Syntax

- DISplay:PLOTView1:XAXIS:SCALE {LINEAR|LOG}

Info

1 is the Plot waveform number.
LINEAR creates a plot with linear scales.
LOG creates a plot with logarithmic scales.

DisplayPlotview1XaxisScale ¶

Bases: SCPICmdWrite

The DISplay:PLOTView1:XAXIS:SCALE command.

Description

This command sets or queries the horizontal scale setting for applicable plots (Linear or Log) for the specified plot view.

Usage

Using the .write(value) method will send the DISplay:PLOTView1:XAXIS:SCALE value command.

SCPI Syntax

- DISplay:PLOTView1:XAXIS:SCALE {LINEAR|LOG}

Info

1 is the Plot waveform number.
LINEAR creates a plot with linear scales.
LOG creates a plot with logarithmic scales.

DisplayPlotview1Yaxis ¶

Bases: SCPICmdRead

The DISplay:PLOTView1:YAXIS command tree.

Usage

Using the .query() method will send the DISplay:PLOTView1:YAXIS? query.
Using the .verify(value) method will send the DISplay:PLOTView1:YAXIS? query and raise an AssertionError if the returned value does not match value.

Properties

.scale: The DISplay:PLOTView1:YAXIS:SCALE command.

scale `property` ¶

scale: DisplayPlotview1YaxisScale

Return the DISplay:PLOTView1:YAXIS:SCALE command.

Description

This command sets or queries the vertical scale setting for applicable plots (Linear or Log) in the specified plot view.

Usage

Using the .write(value) method will send the DISplay:PLOTView1:YAXIS:SCALE value command.

SCPI Syntax

- DISplay:PLOTView1:YAXIS:SCALE {LINEAR|LOG}

Info

1 is the Plot waveform number.
LINEAR specifies a linear vertical scale.
LOG specifies a logarithmic vertical scale.

DisplayPlotview1YaxisScale ¶

Bases: SCPICmdWrite

The DISplay:PLOTView1:YAXIS:SCALE command.

Description

This command sets or queries the vertical scale setting for applicable plots (Linear or Log) in the specified plot view.

Usage

Using the .write(value) method will send the DISplay:PLOTView1:YAXIS:SCALE value command.

SCPI Syntax

- DISplay:PLOTView1:YAXIS:SCALE {LINEAR|LOG}

Info

1 is the Plot waveform number.
LINEAR specifies a linear vertical scale.
LOG specifies a logarithmic vertical scale.

DisplayPlotview1Zoom ¶

Bases: SCPICmdRead

The DISplay:PLOTView1:ZOOM command tree.

Usage

Using the .query() method will send the DISplay:PLOTView1:ZOOM? query.
Using the .verify(value) method will send the DISplay:PLOTView1:ZOOM? query and raise an AssertionError if the returned value does not match value.

Properties

.xaxis: The DISplay:PLOTView1:ZOOM:XAXIS command tree.
.yaxis: The DISplay:PLOTView1:ZOOM:YAXIS command tree.

xaxis `property` ¶

xaxis: DisplayPlotview1ZoomXaxis

Return the DISplay:PLOTView1:ZOOM:XAXIS command tree.

Usage

Using the .query() method will send the DISplay:PLOTView1:ZOOM:XAXIS? query.
Using the .verify(value) method will send the DISplay:PLOTView1:ZOOM:XAXIS? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.from: The DISplay:PLOTView1:ZOOM:XAXIS:FROM command.
.to: The DISplay:PLOTView1:ZOOM:XAXIS:TO command.

yaxis `property` ¶

yaxis: DisplayPlotview1ZoomYaxis

Return the DISplay:PLOTView1:ZOOM:YAXIS command tree.

Usage

Using the .query() method will send the DISplay:PLOTView1:ZOOM:YAXIS? query.
Using the .verify(value) method will send the DISplay:PLOTView1:ZOOM:YAXIS? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.from: The DISplay:PLOTView1:ZOOM:YAXIS:FROM command.
.to: The DISplay:PLOTView1:ZOOM:YAXIS:TO command.

DisplayPlotview1ZoomXaxis ¶

Bases: SCPICmdRead

The DISplay:PLOTView1:ZOOM:XAXIS command tree.

Usage

Using the .query() method will send the DISplay:PLOTView1:ZOOM:XAXIS? query.
Using the .verify(value) method will send the DISplay:PLOTView1:ZOOM:XAXIS? query and raise an AssertionError if the returned value does not match value.

Properties

.from: The DISplay:PLOTView1:ZOOM:XAXIS:FROM command.
.to: The DISplay:PLOTView1:ZOOM:XAXIS:TO command.

from_ `property` ¶

from_: DisplayPlotview1ZoomXaxisFrom

Return the DISplay:PLOTView1:ZOOM:XAXIS:FROM command.

Description

This command sets or queries the value of the left edge of the specified plot.

Usage

Using the .query() method will send the DISplay:PLOTView1:ZOOM:XAXIS:FROM? query.
Using the .verify(value) method will send the DISplay:PLOTView1:ZOOM:XAXIS:FROM? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:PLOTView1:ZOOM:XAXIS:FROM value command.

SCPI Syntax

- DISplay:PLOTView1:ZOOM:XAXIS:FROM <NR3>
- DISplay:PLOTView1:ZOOM:XAXIS:FROM?

Info

1 is the Plot waveform number.
<NR3> is start of the zoom x-axis.

to `property` ¶

to: DisplayPlotview1ZoomXaxisTo

Return the DISplay:PLOTView1:ZOOM:XAXIS:TO command.

Description

This command sets or queries the value of the right edge of the specified plot.

Usage

Using the .query() method will send the DISplay:PLOTView1:ZOOM:XAXIS:TO? query.
Using the .verify(value) method will send the DISplay:PLOTView1:ZOOM:XAXIS:TO? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:PLOTView1:ZOOM:XAXIS:TO value command.

SCPI Syntax

- DISplay:PLOTView1:ZOOM:XAXIS:TO <NR3>
- DISplay:PLOTView1:ZOOM:XAXIS:TO?

Info

1 is the Plot waveform number.
<NR3> is the end of the zoom x-axis.

DisplayPlotview1ZoomXaxisFrom ¶

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:PLOTView1:ZOOM:XAXIS:FROM command.

Description

This command sets or queries the value of the left edge of the specified plot.

Usage

Using the .query() method will send the DISplay:PLOTView1:ZOOM:XAXIS:FROM? query.
Using the .verify(value) method will send the DISplay:PLOTView1:ZOOM:XAXIS:FROM? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:PLOTView1:ZOOM:XAXIS:FROM value command.

SCPI Syntax

- DISplay:PLOTView1:ZOOM:XAXIS:FROM <NR3>
- DISplay:PLOTView1:ZOOM:XAXIS:FROM?

Info

1 is the Plot waveform number.
<NR3> is start of the zoom x-axis.

DisplayPlotview1ZoomXaxisTo ¶

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:PLOTView1:ZOOM:XAXIS:TO command.

Description

This command sets or queries the value of the right edge of the specified plot.

Usage

Using the .query() method will send the DISplay:PLOTView1:ZOOM:XAXIS:TO? query.
Using the .verify(value) method will send the DISplay:PLOTView1:ZOOM:XAXIS:TO? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:PLOTView1:ZOOM:XAXIS:TO value command.

SCPI Syntax

- DISplay:PLOTView1:ZOOM:XAXIS:TO <NR3>
- DISplay:PLOTView1:ZOOM:XAXIS:TO?

Info

1 is the Plot waveform number.
<NR3> is the end of the zoom x-axis.

DisplayPlotview1ZoomYaxis ¶

Bases: SCPICmdRead

The DISplay:PLOTView1:ZOOM:YAXIS command tree.

Usage

Using the .query() method will send the DISplay:PLOTView1:ZOOM:YAXIS? query.
Using the .verify(value) method will send the DISplay:PLOTView1:ZOOM:YAXIS? query and raise an AssertionError if the returned value does not match value.

Properties

.from: The DISplay:PLOTView1:ZOOM:YAXIS:FROM command.
.to: The DISplay:PLOTView1:ZOOM:YAXIS:TO command.

from_ `property` ¶

from_: DisplayPlotview1ZoomYaxisFrom

Return the DISplay:PLOTView1:ZOOM:YAXIS:FROM command.

Description

This command sets or queries the bottom value of the zoom y-axis in the specified plot view.

Usage

Using the .query() method will send the DISplay:PLOTView1:ZOOM:YAXIS:FROM? query.
Using the .verify(value) method will send the DISplay:PLOTView1:ZOOM:YAXIS:FROM? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:PLOTView1:ZOOM:YAXIS:FROM value command.

SCPI Syntax

- DISplay:PLOTView1:ZOOM:YAXIS:FROM <NR3>
- DISplay:PLOTView1:ZOOM:YAXIS:FROM?

Info

1 is the Plot waveform number.
<NR3> is the bottom value of the zoom y-axis.

to `property` ¶

to: DisplayPlotview1ZoomYaxisTo

Return the DISplay:PLOTView1:ZOOM:YAXIS:TO command.

Description

This command sets or queries the top value of the zoom y-axis in the specified plot view.

Usage

Using the .query() method will send the DISplay:PLOTView1:ZOOM:YAXIS:TO? query.
Using the .verify(value) method will send the DISplay:PLOTView1:ZOOM:YAXIS:TO? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:PLOTView1:ZOOM:YAXIS:TO value command.

SCPI Syntax

- DISplay:PLOTView1:ZOOM:YAXIS:TO <NR3>
- DISplay:PLOTView1:ZOOM:YAXIS:TO?

Info

1 is the Plot waveform number.
<NR3> is the top value of the zoom y-axis.

DisplayPlotview1ZoomYaxisFrom ¶

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:PLOTView1:ZOOM:YAXIS:FROM command.

Description

This command sets or queries the bottom value of the zoom y-axis in the specified plot view.

Usage

Using the .query() method will send the DISplay:PLOTView1:ZOOM:YAXIS:FROM? query.
Using the .verify(value) method will send the DISplay:PLOTView1:ZOOM:YAXIS:FROM? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:PLOTView1:ZOOM:YAXIS:FROM value command.

SCPI Syntax

- DISplay:PLOTView1:ZOOM:YAXIS:FROM <NR3>
- DISplay:PLOTView1:ZOOM:YAXIS:FROM?

Info

1 is the Plot waveform number.
<NR3> is the bottom value of the zoom y-axis.

DisplayPlotview1ZoomYaxisTo ¶

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:PLOTView1:ZOOM:YAXIS:TO command.

Description

This command sets or queries the top value of the zoom y-axis in the specified plot view.

Usage

Using the .query() method will send the DISplay:PLOTView1:ZOOM:YAXIS:TO? query.
Using the .verify(value) method will send the DISplay:PLOTView1:ZOOM:YAXIS:TO? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:PLOTView1:ZOOM:YAXIS:TO value command.

SCPI Syntax

- DISplay:PLOTView1:ZOOM:YAXIS:TO <NR3>
- DISplay:PLOTView1:ZOOM:YAXIS:TO?

Info

1 is the Plot waveform number.
<NR3> is the top value of the zoom y-axis.

DisplayRefItem ¶

Bases: ValidatedDynamicNumberCmd, SCPICmdRead

The DISplay:REF<x> command tree.

Usage

Using the .query() method will send the DISplay:REF<x>? query.
Using the .verify(value) method will send the DISplay:REF<x>? query and raise an AssertionError if the returned value does not match value.

Info

REF<x> specifies the reference waveform for which you want to change the waveform color, where is the reference waveform number.

Properties

.invertcolor: The DISplay:REF<x>:INVERTColor command.
.normalcolor: The DISplay:REF<x>:NORMALColor command.

invertcolor `property` ¶

invertcolor: DisplayRefItemInvertcolor

Return the DISplay:REF<x>:INVERTColor command.

Description

This command sets or queries the Inverted mode color of the specified input source to the specified color. You can assign one of 48 unique colors to any channel, math, or reference waveform. These colors replace the default Inverted colors and remain in effect until you reset the colors.

Usage

Using the .query() method will send the DISplay:REF<x>:INVERTColor? query.
Using the .verify(value) method will send the DISplay:REF<x>:INVERTColor? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:REF<x>:INVERTColor value command.

SCPI Syntax

- DISplay:REF<x>:INVERTColor COLOR<x>
- DISplay:REF<x>:INVERTColor?

Info

REF<x> specifies the reference waveform for which you want to change the waveform color, where is the reference waveform number.
COLOR<x> specifies the color to assign to the specified waveform, where = 0 to 47.

normalcolor `property` ¶

normalcolor: DisplayRefItemNormalcolor

Return the DISplay:REF<x>:NORMALColor command.

Description

This command sets or queries the normal mode color of the specified input source to the specified color. You can assign one of 48 unique colors to any channel, math, or reference waveform. These colors replace the default normal colors and remain in effect until you reset the colors.

Usage

Using the .query() method will send the DISplay:REF<x>:NORMALColor? query.
Using the .verify(value) method will send the DISplay:REF<x>:NORMALColor? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:REF<x>:NORMALColor value command.

SCPI Syntax

- DISplay:REF<x>:NORMALColor COLOR<x>
- DISplay:REF<x>:NORMALColor?

Info

REF<x> specifies the reference waveform for which you want to change the waveform color, where is the reference waveform number.
COLOR<x> specifies the color to assign to the specified waveform, where = 0 to 47.

DisplayRefItemInvertcolor ¶

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:REF<x>:INVERTColor command.

Description

This command sets or queries the Inverted mode color of the specified input source to the specified color. You can assign one of 48 unique colors to any channel, math, or reference waveform. These colors replace the default Inverted colors and remain in effect until you reset the colors.

Usage

Using the .query() method will send the DISplay:REF<x>:INVERTColor? query.
Using the .verify(value) method will send the DISplay:REF<x>:INVERTColor? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:REF<x>:INVERTColor value command.

SCPI Syntax

- DISplay:REF<x>:INVERTColor COLOR<x>
- DISplay:REF<x>:INVERTColor?

Info

REF<x> specifies the reference waveform for which you want to change the waveform color, where is the reference waveform number.
COLOR<x> specifies the color to assign to the specified waveform, where = 0 to 47.

DisplayRefItemNormalcolor ¶

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:REF<x>:NORMALColor command.

Description

This command sets or queries the normal mode color of the specified input source to the specified color. You can assign one of 48 unique colors to any channel, math, or reference waveform. These colors replace the default normal colors and remain in effect until you reset the colors.

Usage

Using the .query() method will send the DISplay:REF<x>:NORMALColor? query.
Using the .verify(value) method will send the DISplay:REF<x>:NORMALColor? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:REF<x>:NORMALColor value command.

SCPI Syntax

- DISplay:REF<x>:NORMALColor COLOR<x>
- DISplay:REF<x>:NORMALColor?

Info

REF<x> specifies the reference waveform for which you want to change the waveform color, where is the reference waveform number.
COLOR<x> specifies the color to assign to the specified waveform, where = 0 to 47.

DisplayReffftviewItem ¶

Bases: ValidatedDynamicNumberCmd, SCPICmdRead

The DISplay:REFFFTView<x> command tree.

Usage

Using the .query() method will send the DISplay:REFFFTView<x>? query.
Using the .verify(value) method will send the DISplay:REFFFTView<x>? query and raise an AssertionError if the returned value does not match value.

Info

REFFFTView<x> is the Reference FFT plot number.

Properties

.autoscale: The DISplay:REFFFTView<x>:AUTOScale command.
.cursor: The DISplay:REFFFTView<x>:CURSor command tree.
.gridlines: The DISplay:REFFFTView<x>:GRIDlines command.
.ref: The DISplay:REFFFTView<x>:REF command tree.
.xaxis: The DISplay:REFFFTView<x>:XAXIS command tree.
.zoom: The DISplay:REFFFTView<x>:ZOOM command tree.

autoscale `property` ¶

autoscale: DisplayReffftviewItemAutoscale

Return the DISplay:REFFFTView<x>:AUTOScale command.

Description

This command sets or queries the enabled state of auto-scale for plots.

Usage

Using the .query() method will send the DISplay:REFFFTView<x>:AUTOScale? query.
Using the .verify(value) method will send the DISplay:REFFFTView<x>:AUTOScale? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:REFFFTView<x>:AUTOScale value command.

SCPI Syntax

- DISplay:REFFFTView<x>:AUTOScale {ON|OFF|1|0}
- DISplay:REFFFTView<x>:AUTOScale?

Info

REFFFTView<x> is the Reference FFT plot number.
OFF disables auto-scale on the specified reffftview.
0 disables auto-scale on the specified reffftview.
ON enables the specified channel on the specified Waveform View.
1 enables the specified channel on the specified Waveform View.

cursor `property` ¶

cursor: DisplayReffftviewItemCursor

Return the DISplay:REFFFTView<x>:CURSor command tree.

Usage

Using the .query() method will send the DISplay:REFFFTView<x>:CURSor? query.
Using the .verify(value) method will send the DISplay:REFFFTView<x>:CURSor? query and raise an AssertionError if the returned value does not match value.

Info

REFFFTView<x> is the Reference FFT plot number.

Sub-properties

.asource: The DISplay:REFFFTView<x>:CURSor:ASOUrce command.
.bsource: The DISplay:REFFFTView<x>:CURSor:BSOUrce command.
.ddt: The DISplay:REFFFTView<x>:CURSor:DDT command.
.function: The DISplay:REFFFTView<x>:CURSor:FUNCtion command.
.hbars: The DISplay:REFFFTView<x>:CURSor:HBArs command tree.
.mode: The DISplay:REFFFTView<x>:CURSor:MODe command.
.oneoverdeltatvalue: The DISplay:REFFFTView<x>:CURSor:ONEOVERDELTATVALUE command.
.rolocation: The DISplay:REFFFTView<x>:CURSor:ROLOCATION command.
.screen: The DISplay:REFFFTView<x>:CURSor:SCREEN command tree.
.splitmode: The DISplay:REFFFTView<x>:CURSor:SPLITMODE command.
.state: The DISplay:REFFFTView<x>:CURSor:STATE command.
.vbars: The DISplay:REFFFTView<x>:CURSor:VBArs command tree.
.waveform: The DISplay:REFFFTView<x>:CURSor:WAVEform command tree.

gridlines `property` ¶

gridlines: DisplayReffftviewItemGridlines

Return the DISplay:REFFFTView<x>:GRIDlines command.

Description

This command sets or returns the grid lines setting of the plot.

Usage

Using the .query() method will send the DISplay:REFFFTView<x>:GRIDlines? query.
Using the .verify(value) method will send the DISplay:REFFFTView<x>:GRIDlines? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:REFFFTView<x>:GRIDlines value command.

SCPI Syntax

- DISplay:REFFFTView<x>:GRIDlines {HORizontal|VERTical|BOTH}
- DISplay:REFFFTView<x>:GRIDlines?

Info

REFFFTView<x> is the Reference FFT plot number.
HORizontal specifies horizontal grid lines.
VERTical specifies vertical grid lines.
BOTH specifies both horizontal and vertical grid lines.

ref `property` ¶

ref: DisplayReffftviewItemRef

Return the DISplay:REFFFTView<x>:REF command tree.

Usage

Using the .query() method will send the DISplay:REFFFTView<x>:REF? query.
Using the .verify(value) method will send the DISplay:REFFFTView<x>:REF? query and raise an AssertionError if the returned value does not match value.

Info

REFFFTView<x> is the Reference FFT plot number.

Sub-properties

.ref: The DISplay:REFFFTView<x>:REF:REF<x> command tree.

xaxis `property` ¶

xaxis: DisplayReffftviewItemXaxis

Return the DISplay:REFFFTView<x>:XAXIS command tree.

Usage

Using the .query() method will send the DISplay:REFFFTView<x>:XAXIS? query.
Using the .verify(value) method will send the DISplay:REFFFTView<x>:XAXIS? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.scale: The DISplay:REFFFTView<x>:XAXIS:SCALE command.

zoom `property` ¶

zoom: DisplayReffftviewItemZoom

Return the DISplay:REFFFTView<x>:ZOOM command tree.

Usage

Using the .query() method will send the DISplay:REFFFTView<x>:ZOOM? query.
Using the .verify(value) method will send the DISplay:REFFFTView<x>:ZOOM? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.xaxis: The DISplay:REFFFTView<x>:ZOOM:XAXIS command tree.
.yaxis: The DISplay:REFFFTView<x>:ZOOM:YAXIS command tree.

DisplayReffftviewItemAutoscale ¶

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:REFFFTView<x>:AUTOScale command.

Description

This command sets or queries the enabled state of auto-scale for plots.

Usage

Using the .query() method will send the DISplay:REFFFTView<x>:AUTOScale? query.
Using the .verify(value) method will send the DISplay:REFFFTView<x>:AUTOScale? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:REFFFTView<x>:AUTOScale value command.

SCPI Syntax

- DISplay:REFFFTView<x>:AUTOScale {ON|OFF|1|0}
- DISplay:REFFFTView<x>:AUTOScale?

Info

REFFFTView<x> is the Reference FFT plot number.
OFF disables auto-scale on the specified reffftview.
0 disables auto-scale on the specified reffftview.
ON enables the specified channel on the specified Waveform View.
1 enables the specified channel on the specified Waveform View.

DisplayReffftviewItemCursor ¶

Bases: SCPICmdRead

The DISplay:REFFFTView<x>:CURSor command tree.

Usage

Using the .query() method will send the DISplay:REFFFTView<x>:CURSor? query.
Using the .verify(value) method will send the DISplay:REFFFTView<x>:CURSor? query and raise an AssertionError if the returned value does not match value.

Info

REFFFTView<x> is the Reference FFT plot number.

Properties

.asource: The DISplay:REFFFTView<x>:CURSor:ASOUrce command.
.bsource: The DISplay:REFFFTView<x>:CURSor:BSOUrce command.
.ddt: The DISplay:REFFFTView<x>:CURSor:DDT command.
.function: The DISplay:REFFFTView<x>:CURSor:FUNCtion command.
.hbars: The DISplay:REFFFTView<x>:CURSor:HBArs command tree.
.mode: The DISplay:REFFFTView<x>:CURSor:MODe command.
.oneoverdeltatvalue: The DISplay:REFFFTView<x>:CURSor:ONEOVERDELTATVALUE command.
.rolocation: The DISplay:REFFFTView<x>:CURSor:ROLOCATION command.
.screen: The DISplay:REFFFTView<x>:CURSor:SCREEN command tree.
.splitmode: The DISplay:REFFFTView<x>:CURSor:SPLITMODE command.
.state: The DISplay:REFFFTView<x>:CURSor:STATE command.
.vbars: The DISplay:REFFFTView<x>:CURSor:VBArs command tree.
.waveform: The DISplay:REFFFTView<x>:CURSor:WAVEform command tree.

asource `property` ¶

asource: DisplayReffftviewItemCursorAsource

Return the DISplay:REFFFTView<x>:CURSor:ASOUrce command.

Description

This command returns the cursor source for plot cursor A

Usage

Using the .query() method will send the DISplay:REFFFTView<x>:CURSor:ASOUrce? query.
Using the .verify(value) method will send the DISplay:REFFFTView<x>:CURSor:ASOUrce? query and raise an AssertionError if the returned value does not match value.

SCPI Syntax

- DISplay:REFFFTView<x>:CURSor:ASOUrce?

Info

REFFFTView<x> is the Reference FFT plot number.

bsource `property` ¶

bsource: DisplayReffftviewItemCursorBsource

Return the DISplay:REFFFTView<x>:CURSor:BSOUrce command.

Description

This command returns the cursor source for plot cursor B.

Usage

Using the .query() method will send the DISplay:REFFFTView<x>:CURSor:BSOUrce? query.
Using the .verify(value) method will send the DISplay:REFFFTView<x>:CURSor:BSOUrce? query and raise an AssertionError if the returned value does not match value.

SCPI Syntax

- DISplay:REFFFTView<x>:CURSor:BSOUrce?

Info

REFFFTView<x> is the Reference FFT plot number.

ddt `property` ¶

ddt: DisplayReffftviewItemCursorDdt

Return the DISplay:REFFFTView<x>:CURSor:DDT command.

Description

This command returns the delta V over delta T cursor readout value of the specified cursor in the specified view.

Usage

Using the .query() method will send the DISplay:REFFFTView<x>:CURSor:DDT? query.
Using the .verify(value) method will send the DISplay:REFFFTView<x>:CURSor:DDT? query and raise an AssertionError if the returned value does not match value.

SCPI Syntax

- DISplay:REFFFTView<x>:CURSor:DDT?

Info

REFFFTView<x> is the Reference FFT plot number.

function `property` ¶

function: DisplayReffftviewItemCursorFunction

Return the DISplay:REFFFTView<x>:CURSor:FUNCtion command.

Description

This command sets or queries the cursor type of the specified cursor in the specified view.

Usage

Using the .query() method will send the DISplay:REFFFTView<x>:CURSor:FUNCtion? query.
Using the .verify(value) method will send the DISplay:REFFFTView<x>:CURSor:FUNCtion? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:REFFFTView<x>:CURSor:FUNCtion value command.

SCPI Syntax

- DISplay:REFFFTView<x>:CURSor:FUNCtion {WAVEform|VBArs|HBArs|SCREEN}
- DISplay:REFFFTView<x>:CURSor:FUNCtion?

Info

REFFFTView<x> is the Reference FFT plot number.
HBArs specifies horizontal bar cursors, which measure in vertical units.
VBArs specifies vertical bar cursors, which measure in horizontal units.
SCREEN specifies both horizontal and vertical bar cursors, which measure inhorizontal and vertical units specified by the cursor sources. Use these cursorsto measure anywhere in the waveform display area.
DISplay:REFFFTView5:CURSor:FUNCtion screen sets the cursor function to screen.
DISplay:REFFFTView5:CURSor:FUNCtion? might return DISPLAY:REFFFTVIEW5:CURSOR:FUNCTION WAVEFORM indicating the cursor function is set to waveform.

hbars `property` ¶

hbars: DisplayReffftviewItemCursorHbars

Return the DISplay:REFFFTView<x>:CURSor:HBArs command tree.

Usage

Using the .query() method will send the DISplay:REFFFTView<x>:CURSor:HBArs? query.
Using the .verify(value) method will send the DISplay:REFFFTView<x>:CURSor:HBArs? query and raise an AssertionError if the returned value does not match value.

Info

REFFFTView<x> is the Reference FFT plot number.

Sub-properties

.aposition: The DISplay:REFFFTView<x>:CURSor:HBArs:APOSition command.
.aunits: The DISplay:REFFFTView<x>:CURSor:HBArs:AUNIts command.
.bposition: The DISplay:REFFFTView<x>:CURSor:HBArs:BPOSition command.
.bunits: The DISplay:REFFFTView<x>:CURSor:HBArs:BUNIts command.
.delta: The DISplay:REFFFTView<x>:CURSor:HBArs:DELTa command.

mode `property` ¶

mode: DisplayReffftviewItemCursorMode

Return the DISplay:REFFFTView<x>:CURSor:MODe command.

Description

This command sets or queries the cursor tracking mode of the specified cursor in the specified view.

Usage

Using the .query() method will send the DISplay:REFFFTView<x>:CURSor:MODe? query.
Using the .verify(value) method will send the DISplay:REFFFTView<x>:CURSor:MODe? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:REFFFTView<x>:CURSor:MODe value command.

SCPI Syntax

- DISplay:REFFFTView<x>:CURSor:MODe {INDEPENDENT|TRACK}
- DISplay:REFFFTView<x>:CURSor:MODe?

Info

REFFFTView<x> is the Reference FFT plot number.
TRACK ties the navigational functionality of the two cursors together. For cursor A adjustments, this ties the movement of the two cursors together; however, cursor B continues to move independently of cursor A.
INDEPENDENT allows independent adjustment of the two cursors.

oneoverdeltatvalue `property` ¶

oneoverdeltatvalue: DisplayReffftviewItemCursorOneoverdeltatvalue

Return the DISplay:REFFFTView<x>:CURSor:ONEOVERDELTATVALUE command.

Description

This command returns the one over delta T cursor readout value of the specified cursor in the specified view.

Usage

Using the .query() method will send the DISplay:REFFFTView<x>:CURSor:ONEOVERDELTATVALUE? query.
Using the .verify(value) method will send the DISplay:REFFFTView<x>:CURSor:ONEOVERDELTATVALUE? query and raise an AssertionError if the returned value does not match value.

SCPI Syntax

- DISplay:REFFFTView<x>:CURSor:ONEOVERDELTATVALUE?

Info

REFFFTView<x> is the Reference FFT plot number.

rolocation `property` ¶

rolocation: DisplayReffftviewItemCursorRolocation

Return the DISplay:REFFFTView<x>:CURSor:ROLOCATION command.

Description

This command sets or queries the location to display the specified Reference FFT plot cursor readouts (in the plot graticule or in a badge in the Results Bar).

Usage

Using the .query() method will send the DISplay:REFFFTView<x>:CURSor:ROLOCATION? query.
Using the .verify(value) method will send the DISplay:REFFFTView<x>:CURSor:ROLOCATION? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:REFFFTView<x>:CURSor:ROLOCATION value command.

SCPI Syntax

- DISplay:REFFFTView<x>:CURSor:ROLOCATION {GRATICULE|BADGE}
- DISplay:REFFFTView<x>:CURSor:ROLOCATION?

Info

REFFFTView<x> is the Reference FFT plot number.
GRATICULE sets the Reference FFT plot cursor readouts to display as part of the cursors in the plot view.
BADGE removes the Reference FFT plot cursor readouts from the cursors in the graticule and displays the cursor information as a badge in the Results Bar.

screen `property` ¶

screen: DisplayReffftviewItemCursorScreen

Return the DISplay:REFFFTView<x>:CURSor:SCREEN command tree.

Usage

Using the .query() method will send the DISplay:REFFFTView<x>:CURSor:SCREEN? query.
Using the .verify(value) method will send the DISplay:REFFFTView<x>:CURSor:SCREEN? query and raise an AssertionError if the returned value does not match value.

Info

REFFFTView<x> is the Reference FFT plot number.

Sub-properties

.axposition: The DISplay:REFFFTView<x>:CURSor:SCREEN:AXPOSition command.
.ayposition: The DISplay:REFFFTView<x>:CURSor:SCREEN:AYPOSition command.
.bxposition: The DISplay:REFFFTView<x>:CURSor:SCREEN:BXPOSition command.
.byposition: The DISplay:REFFFTView<x>:CURSor:SCREEN:BYPOSition command.

splitmode `property` ¶

splitmode: DisplayReffftviewItemCursorSplitmode

Return the DISplay:REFFFTView<x>:CURSor:SPLITMODE command.

Description

This command sets or queries whether both cursors have same or different source.

Usage

Using the .query() method will send the DISplay:REFFFTView<x>:CURSor:SPLITMODE? query.
Using the .verify(value) method will send the DISplay:REFFFTView<x>:CURSor:SPLITMODE? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:REFFFTView<x>:CURSor:SPLITMODE value command.

SCPI Syntax

- DISplay:REFFFTView<x>:CURSor:SPLITMODE {SAME|SPLIT}
- DISplay:REFFFTView<x>:CURSor:SPLITMODE?

Info

REFFFTView<x> is the Reference FFT plot number.
SAME specifies both cursors have the same sources.
SPLIT specifies both cursors have different sources.

state `property` ¶

state: DisplayReffftviewItemCursorState

Return the DISplay:REFFFTView<x>:CURSor:STATE command.

Description

This command sets or queries the visible state of the cursor of the specified cursor in the specified view.

Usage

Using the .query() method will send the DISplay:REFFFTView<x>:CURSor:STATE? query.
Using the .verify(value) method will send the DISplay:REFFFTView<x>:CURSor:STATE? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:REFFFTView<x>:CURSor:STATE value command.

SCPI Syntax

- DISplay:REFFFTView<x>:CURSor:STATE {ON|OFF|1|0}
- DISplay:REFFFTView<x>:CURSor:STATE?

Info

REFFFTView<x> is the Reference FFT plot number.
OFF specifies the cursor is not visible.
ON displays the cursor.
0 specifies the cursor is not visible.
1 displays the cursor.

vbars `property` ¶

vbars: DisplayReffftviewItemCursorVbars

Return the DISplay:REFFFTView<x>:CURSor:VBArs command tree.

Usage

Using the .query() method will send the DISplay:REFFFTView<x>:CURSor:VBArs? query.
Using the .verify(value) method will send the DISplay:REFFFTView<x>:CURSor:VBArs? query and raise an AssertionError if the returned value does not match value.

Info

REFFFTView<x> is the Reference FFT plot number.

Sub-properties

.aposition: The DISplay:REFFFTView<x>:CURSor:VBArs:APOSition command.
.bposition: The DISplay:REFFFTView<x>:CURSor:VBArs:BPOSition command.
.delta: The DISplay:REFFFTView<x>:CURSor:VBArs:DELTa command.
.units: The DISplay:REFFFTView<x>:CURSor:VBArs:UNIts command.

waveform `property` ¶

waveform: DisplayReffftviewItemCursorWaveform

Return the DISplay:REFFFTView<x>:CURSor:WAVEform command tree.

Usage

Using the .query() method will send the DISplay:REFFFTView<x>:CURSor:WAVEform? query.
Using the .verify(value) method will send the DISplay:REFFFTView<x>:CURSor:WAVEform? query and raise an AssertionError if the returned value does not match value.

Info

REFFFTView<x> is the Reference FFT plot number.

Sub-properties

.ahposition: The DISplay:REFFFTView<x>:CURSor:WAVEform:AHPOSition command.
.aposition: The DISplay:REFFFTView<x>:CURSor:WAVEform:APOSition command.
.avposition: The DISplay:REFFFTView<x>:CURSor:WAVEform:AVPOSition command.
.bhposition: The DISplay:REFFFTView<x>:CURSor:WAVEform:BHPOSition command.
.bposition: The DISplay:REFFFTView<x>:CURSor:WAVEform:BPOSition command.
.bvposition: The DISplay:REFFFTView<x>:CURSor:WAVEform:BVPOSition command.

DisplayReffftviewItemCursorAsource ¶

Bases: SCPICmdRead

The DISplay:REFFFTView<x>:CURSor:ASOUrce command.

Description

This command returns the cursor source for plot cursor A

Usage

Using the .query() method will send the DISplay:REFFFTView<x>:CURSor:ASOUrce? query.
Using the .verify(value) method will send the DISplay:REFFFTView<x>:CURSor:ASOUrce? query and raise an AssertionError if the returned value does not match value.

SCPI Syntax

- DISplay:REFFFTView<x>:CURSor:ASOUrce?

Info

REFFFTView<x> is the Reference FFT plot number.

DisplayReffftviewItemCursorBsource ¶

Bases: SCPICmdRead

The DISplay:REFFFTView<x>:CURSor:BSOUrce command.

Description

This command returns the cursor source for plot cursor B.

Usage

Using the .query() method will send the DISplay:REFFFTView<x>:CURSor:BSOUrce? query.
Using the .verify(value) method will send the DISplay:REFFFTView<x>:CURSor:BSOUrce? query and raise an AssertionError if the returned value does not match value.

SCPI Syntax

- DISplay:REFFFTView<x>:CURSor:BSOUrce?

Info

REFFFTView<x> is the Reference FFT plot number.

DisplayReffftviewItemCursorDdt ¶

Bases: SCPICmdRead

The DISplay:REFFFTView<x>:CURSor:DDT command.

Description

This command returns the delta V over delta T cursor readout value of the specified cursor in the specified view.

Usage

Using the .query() method will send the DISplay:REFFFTView<x>:CURSor:DDT? query.
Using the .verify(value) method will send the DISplay:REFFFTView<x>:CURSor:DDT? query and raise an AssertionError if the returned value does not match value.

SCPI Syntax

- DISplay:REFFFTView<x>:CURSor:DDT?

Info

REFFFTView<x> is the Reference FFT plot number.

DisplayReffftviewItemCursorFunction ¶

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:REFFFTView<x>:CURSor:FUNCtion command.

Description

This command sets or queries the cursor type of the specified cursor in the specified view.

Usage

Using the .query() method will send the DISplay:REFFFTView<x>:CURSor:FUNCtion? query.
Using the .verify(value) method will send the DISplay:REFFFTView<x>:CURSor:FUNCtion? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:REFFFTView<x>:CURSor:FUNCtion value command.

SCPI Syntax

- DISplay:REFFFTView<x>:CURSor:FUNCtion {WAVEform|VBArs|HBArs|SCREEN}
- DISplay:REFFFTView<x>:CURSor:FUNCtion?

Info

REFFFTView<x> is the Reference FFT plot number.
HBArs specifies horizontal bar cursors, which measure in vertical units.
VBArs specifies vertical bar cursors, which measure in horizontal units.
SCREEN specifies both horizontal and vertical bar cursors, which measure inhorizontal and vertical units specified by the cursor sources. Use these cursorsto measure anywhere in the waveform display area.
DISplay:REFFFTView5:CURSor:FUNCtion screen sets the cursor function to screen.
DISplay:REFFFTView5:CURSor:FUNCtion? might return DISPLAY:REFFFTVIEW5:CURSOR:FUNCTION WAVEFORM indicating the cursor function is set to waveform.

DisplayReffftviewItemCursorHbars ¶

Bases: SCPICmdRead

The DISplay:REFFFTView<x>:CURSor:HBArs command tree.

Usage

Using the .query() method will send the DISplay:REFFFTView<x>:CURSor:HBArs? query.
Using the .verify(value) method will send the DISplay:REFFFTView<x>:CURSor:HBArs? query and raise an AssertionError if the returned value does not match value.

Info

REFFFTView<x> is the Reference FFT plot number.

Properties

.aposition: The DISplay:REFFFTView<x>:CURSor:HBArs:APOSition command.
.aunits: The DISplay:REFFFTView<x>:CURSor:HBArs:AUNIts command.
.bposition: The DISplay:REFFFTView<x>:CURSor:HBArs:BPOSition command.
.bunits: The DISplay:REFFFTView<x>:CURSor:HBArs:BUNIts command.
.delta: The DISplay:REFFFTView<x>:CURSor:HBArs:DELTa command.

aposition `property` ¶

aposition: DisplayReffftviewItemCursorHbarsAposition

Return the DISplay:REFFFTView<x>:CURSor:HBArs:APOSition command.

Description

This command sets or queries the vertical cursor A position of the specified cursor in the specified view.

Usage

Using the .query() method will send the DISplay:REFFFTView<x>:CURSor:HBArs:APOSition? query.
Using the .verify(value) method will send the DISplay:REFFFTView<x>:CURSor:HBArs:APOSition? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:REFFFTView<x>:CURSor:HBArs:APOSition value command.

SCPI Syntax

- DISplay:REFFFTView<x>:CURSor:HBArs:APOSition <NR3>
- DISplay:REFFFTView<x>:CURSor:HBArs:APOSition?

Info

REFFFTView<x> is the Reference FFT plot number.
<NR3> is the vertical cursor A position of the specified cursor in the specified view.

aunits `property` ¶

aunits: DisplayReffftviewItemCursorHbarsAunits

Return the DISplay:REFFFTView<x>:CURSor:HBArs:AUNIts command.

Description

This command returns cursor A vertical units of the specified cursor in the specified view.

Usage

Using the .query() method will send the DISplay:REFFFTView<x>:CURSor:HBArs:AUNIts? query.
Using the .verify(value) method will send the DISplay:REFFFTView<x>:CURSor:HBArs:AUNIts? query and raise an AssertionError if the returned value does not match value.

SCPI Syntax

- DISplay:REFFFTView<x>:CURSor:HBArs:AUNIts?

Info

REFFFTView<x> is the Reference FFT plot number.

bposition `property` ¶

bposition: DisplayReffftviewItemCursorHbarsBposition

Return the DISplay:REFFFTView<x>:CURSor:HBArs:BPOSition command.

Description

This command sets or queries the vertical cursor B position of the specified cursor in the specified view.

Usage

Using the .query() method will send the DISplay:REFFFTView<x>:CURSor:HBArs:BPOSition? query.
Using the .verify(value) method will send the DISplay:REFFFTView<x>:CURSor:HBArs:BPOSition? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:REFFFTView<x>:CURSor:HBArs:BPOSition value command.

SCPI Syntax

- DISplay:REFFFTView<x>:CURSor:HBArs:BPOSition <NR3>
- DISplay:REFFFTView<x>:CURSor:HBArs:BPOSition?

Info

REFFFTView<x> is the Reference FFT plot number.
<NR3> is the vertical cursor B position of the specified cursor in the specified view.

bunits `property` ¶

bunits: DisplayReffftviewItemCursorHbarsBunits

Return the DISplay:REFFFTView<x>:CURSor:HBArs:BUNIts command.

Description

This command returns the cursor B vertical units of the specified cursor in the specified view.

Usage

Using the .query() method will send the DISplay:REFFFTView<x>:CURSor:HBArs:BUNIts? query.
Using the .verify(value) method will send the DISplay:REFFFTView<x>:CURSor:HBArs:BUNIts? query and raise an AssertionError if the returned value does not match value.

SCPI Syntax

- DISplay:REFFFTView<x>:CURSor:HBArs:BUNIts?

Info

REFFFTView<x> is the Reference FFT plot number.

delta `property` ¶

delta: DisplayReffftviewItemCursorHbarsDelta

Return the DISplay:REFFFTView<x>:CURSor:HBArs:DELTa command.

Description

This command returns the delta V cursor readout value of the specified cursor in the specified view.

Usage

Using the .query() method will send the DISplay:REFFFTView<x>:CURSor:HBArs:DELTa? query.
Using the .verify(value) method will send the DISplay:REFFFTView<x>:CURSor:HBArs:DELTa? query and raise an AssertionError if the returned value does not match value.

SCPI Syntax

- DISplay:REFFFTView<x>:CURSor:HBArs:DELTa?

Info

REFFFTView<x> is the Reference FFT plot number.

DisplayReffftviewItemCursorHbarsAposition ¶

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:REFFFTView<x>:CURSor:HBArs:APOSition command.

Description

This command sets or queries the vertical cursor A position of the specified cursor in the specified view.

Usage

Using the .query() method will send the DISplay:REFFFTView<x>:CURSor:HBArs:APOSition? query.
Using the .verify(value) method will send the DISplay:REFFFTView<x>:CURSor:HBArs:APOSition? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:REFFFTView<x>:CURSor:HBArs:APOSition value command.

SCPI Syntax

- DISplay:REFFFTView<x>:CURSor:HBArs:APOSition <NR3>
- DISplay:REFFFTView<x>:CURSor:HBArs:APOSition?

Info

REFFFTView<x> is the Reference FFT plot number.
<NR3> is the vertical cursor A position of the specified cursor in the specified view.

DisplayReffftviewItemCursorHbarsAunits ¶

Bases: SCPICmdRead

The DISplay:REFFFTView<x>:CURSor:HBArs:AUNIts command.

Description

This command returns cursor A vertical units of the specified cursor in the specified view.

Usage

Using the .query() method will send the DISplay:REFFFTView<x>:CURSor:HBArs:AUNIts? query.
Using the .verify(value) method will send the DISplay:REFFFTView<x>:CURSor:HBArs:AUNIts? query and raise an AssertionError if the returned value does not match value.

SCPI Syntax

- DISplay:REFFFTView<x>:CURSor:HBArs:AUNIts?

Info

REFFFTView<x> is the Reference FFT plot number.

DisplayReffftviewItemCursorHbarsBposition ¶

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:REFFFTView<x>:CURSor:HBArs:BPOSition command.

Description

This command sets or queries the vertical cursor B position of the specified cursor in the specified view.

Usage

Using the .query() method will send the DISplay:REFFFTView<x>:CURSor:HBArs:BPOSition? query.
Using the .verify(value) method will send the DISplay:REFFFTView<x>:CURSor:HBArs:BPOSition? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:REFFFTView<x>:CURSor:HBArs:BPOSition value command.

SCPI Syntax

- DISplay:REFFFTView<x>:CURSor:HBArs:BPOSition <NR3>
- DISplay:REFFFTView<x>:CURSor:HBArs:BPOSition?

Info

REFFFTView<x> is the Reference FFT plot number.
<NR3> is the vertical cursor B position of the specified cursor in the specified view.

DisplayReffftviewItemCursorHbarsBunits ¶

Bases: SCPICmdRead

The DISplay:REFFFTView<x>:CURSor:HBArs:BUNIts command.

Description

This command returns the cursor B vertical units of the specified cursor in the specified view.

Usage

Using the .query() method will send the DISplay:REFFFTView<x>:CURSor:HBArs:BUNIts? query.
Using the .verify(value) method will send the DISplay:REFFFTView<x>:CURSor:HBArs:BUNIts? query and raise an AssertionError if the returned value does not match value.

SCPI Syntax

- DISplay:REFFFTView<x>:CURSor:HBArs:BUNIts?

Info

REFFFTView<x> is the Reference FFT plot number.

DisplayReffftviewItemCursorHbarsDelta ¶

Bases: SCPICmdRead

The DISplay:REFFFTView<x>:CURSor:HBArs:DELTa command.

Description

This command returns the delta V cursor readout value of the specified cursor in the specified view.

Usage

Using the .query() method will send the DISplay:REFFFTView<x>:CURSor:HBArs:DELTa? query.
Using the .verify(value) method will send the DISplay:REFFFTView<x>:CURSor:HBArs:DELTa? query and raise an AssertionError if the returned value does not match value.

SCPI Syntax

- DISplay:REFFFTView<x>:CURSor:HBArs:DELTa?

Info

REFFFTView<x> is the Reference FFT plot number.

DisplayReffftviewItemCursorMode ¶

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:REFFFTView<x>:CURSor:MODe command.

Description

This command sets or queries the cursor tracking mode of the specified cursor in the specified view.

Usage

Using the .query() method will send the DISplay:REFFFTView<x>:CURSor:MODe? query.
Using the .verify(value) method will send the DISplay:REFFFTView<x>:CURSor:MODe? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:REFFFTView<x>:CURSor:MODe value command.

SCPI Syntax

- DISplay:REFFFTView<x>:CURSor:MODe {INDEPENDENT|TRACK}
- DISplay:REFFFTView<x>:CURSor:MODe?

Info

REFFFTView<x> is the Reference FFT plot number.
TRACK ties the navigational functionality of the two cursors together. For cursor A adjustments, this ties the movement of the two cursors together; however, cursor B continues to move independently of cursor A.
INDEPENDENT allows independent adjustment of the two cursors.

DisplayReffftviewItemCursorOneoverdeltatvalue ¶

Bases: SCPICmdRead

The DISplay:REFFFTView<x>:CURSor:ONEOVERDELTATVALUE command.

Description

This command returns the one over delta T cursor readout value of the specified cursor in the specified view.

Usage

Using the .query() method will send the DISplay:REFFFTView<x>:CURSor:ONEOVERDELTATVALUE? query.
Using the .verify(value) method will send the DISplay:REFFFTView<x>:CURSor:ONEOVERDELTATVALUE? query and raise an AssertionError if the returned value does not match value.

SCPI Syntax

- DISplay:REFFFTView<x>:CURSor:ONEOVERDELTATVALUE?

Info

REFFFTView<x> is the Reference FFT plot number.

DisplayReffftviewItemCursorRolocation ¶

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:REFFFTView<x>:CURSor:ROLOCATION command.

Description

This command sets or queries the location to display the specified Reference FFT plot cursor readouts (in the plot graticule or in a badge in the Results Bar).

Usage

Using the .query() method will send the DISplay:REFFFTView<x>:CURSor:ROLOCATION? query.
Using the .verify(value) method will send the DISplay:REFFFTView<x>:CURSor:ROLOCATION? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:REFFFTView<x>:CURSor:ROLOCATION value command.

SCPI Syntax

- DISplay:REFFFTView<x>:CURSor:ROLOCATION {GRATICULE|BADGE}
- DISplay:REFFFTView<x>:CURSor:ROLOCATION?

Info

REFFFTView<x> is the Reference FFT plot number.
GRATICULE sets the Reference FFT plot cursor readouts to display as part of the cursors in the plot view.
BADGE removes the Reference FFT plot cursor readouts from the cursors in the graticule and displays the cursor information as a badge in the Results Bar.

DisplayReffftviewItemCursorScreen ¶

Bases: SCPICmdRead

The DISplay:REFFFTView<x>:CURSor:SCREEN command tree.

Usage

Using the .query() method will send the DISplay:REFFFTView<x>:CURSor:SCREEN? query.
Using the .verify(value) method will send the DISplay:REFFFTView<x>:CURSor:SCREEN? query and raise an AssertionError if the returned value does not match value.

Info

REFFFTView<x> is the Reference FFT plot number.

Properties

.axposition: The DISplay:REFFFTView<x>:CURSor:SCREEN:AXPOSition command.
.ayposition: The DISplay:REFFFTView<x>:CURSor:SCREEN:AYPOSition command.
.bxposition: The DISplay:REFFFTView<x>:CURSor:SCREEN:BXPOSition command.
.byposition: The DISplay:REFFFTView<x>:CURSor:SCREEN:BYPOSition command.

axposition `property` ¶

axposition: DisplayReffftviewItemCursorScreenAxposition

Return the DISplay:REFFFTView<x>:CURSor:SCREEN:AXPOSition command.

Description

This command sets or queries the horizontal cursor A position of the specified cursor in the specified view.

Usage

Using the .query() method will send the DISplay:REFFFTView<x>:CURSor:SCREEN:AXPOSition? query.
Using the .verify(value) method will send the DISplay:REFFFTView<x>:CURSor:SCREEN:AXPOSition? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:REFFFTView<x>:CURSor:SCREEN:AXPOSition value command.

SCPI Syntax

- DISplay:REFFFTView<x>:CURSor:SCREEN:AXPOSition <NR3>
- DISplay:REFFFTView<x>:CURSor:SCREEN:AXPOSition?

Info

REFFFTView<x> is the Reference FFT plot number.
<NR3> is the horizontal cursor A position of the specified cursor in the specified view.

ayposition `property` ¶

ayposition: DisplayReffftviewItemCursorScreenAyposition

Return the DISplay:REFFFTView<x>:CURSor:SCREEN:AYPOSition command.

Description

This command sets or queries the vertical cursor A position of the specified cursor in the specified view.

Usage

Using the .query() method will send the DISplay:REFFFTView<x>:CURSor:SCREEN:AYPOSition? query.
Using the .verify(value) method will send the DISplay:REFFFTView<x>:CURSor:SCREEN:AYPOSition? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:REFFFTView<x>:CURSor:SCREEN:AYPOSition value command.

SCPI Syntax

- DISplay:REFFFTView<x>:CURSor:SCREEN:AYPOSition <NR3>
- DISplay:REFFFTView<x>:CURSor:SCREEN:AYPOSition?

Info

REFFFTView<x> is the Reference FFT plot number.
<NR3> is the vertical cursor A position of the specified cursor in the specified view.

bxposition `property` ¶

bxposition: DisplayReffftviewItemCursorScreenBxposition

Return the DISplay:REFFFTView<x>:CURSor:SCREEN:BXPOSition command.

Description

This command sets or queries the horizontal cursor B position of the specified cursor in the specified view.

Usage

Using the .query() method will send the DISplay:REFFFTView<x>:CURSor:SCREEN:BXPOSition? query.
Using the .verify(value) method will send the DISplay:REFFFTView<x>:CURSor:SCREEN:BXPOSition? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:REFFFTView<x>:CURSor:SCREEN:BXPOSition value command.

SCPI Syntax

- DISplay:REFFFTView<x>:CURSor:SCREEN:BXPOSition <NR3>
- DISplay:REFFFTView<x>:CURSor:SCREEN:BXPOSition?

Info

REFFFTView<x> is the Reference FFT plot number.
<NR3> is the horizontal cursor B position of the specified cursor in the specified view.

byposition `property` ¶

byposition: DisplayReffftviewItemCursorScreenByposition

Return the DISplay:REFFFTView<x>:CURSor:SCREEN:BYPOSition command.

Description

This command sets or queries the vertical cursor B position of the specified cursor in the specified view.

Usage

Using the .query() method will send the DISplay:REFFFTView<x>:CURSor:SCREEN:BYPOSition? query.
Using the .verify(value) method will send the DISplay:REFFFTView<x>:CURSor:SCREEN:BYPOSition? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:REFFFTView<x>:CURSor:SCREEN:BYPOSition value command.

SCPI Syntax

- DISplay:REFFFTView<x>:CURSor:SCREEN:BYPOSition <NR3>
- DISplay:REFFFTView<x>:CURSor:SCREEN:BYPOSition?

Info

REFFFTView<x> is the Reference FFT plot number.
<NR3> is the vertical cursor B position of the specified cursor in the specified view.

DisplayReffftviewItemCursorScreenAxposition ¶

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:REFFFTView<x>:CURSor:SCREEN:AXPOSition command.

Description

This command sets or queries the horizontal cursor A position of the specified cursor in the specified view.

Usage

Using the .query() method will send the DISplay:REFFFTView<x>:CURSor:SCREEN:AXPOSition? query.
Using the .verify(value) method will send the DISplay:REFFFTView<x>:CURSor:SCREEN:AXPOSition? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:REFFFTView<x>:CURSor:SCREEN:AXPOSition value command.

SCPI Syntax

- DISplay:REFFFTView<x>:CURSor:SCREEN:AXPOSition <NR3>
- DISplay:REFFFTView<x>:CURSor:SCREEN:AXPOSition?

Info

REFFFTView<x> is the Reference FFT plot number.
<NR3> is the horizontal cursor A position of the specified cursor in the specified view.

DisplayReffftviewItemCursorScreenAyposition ¶

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:REFFFTView<x>:CURSor:SCREEN:AYPOSition command.

Description

This command sets or queries the vertical cursor A position of the specified cursor in the specified view.

Usage

Using the .query() method will send the DISplay:REFFFTView<x>:CURSor:SCREEN:AYPOSition? query.
Using the .verify(value) method will send the DISplay:REFFFTView<x>:CURSor:SCREEN:AYPOSition? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:REFFFTView<x>:CURSor:SCREEN:AYPOSition value command.

SCPI Syntax

- DISplay:REFFFTView<x>:CURSor:SCREEN:AYPOSition <NR3>
- DISplay:REFFFTView<x>:CURSor:SCREEN:AYPOSition?

Info

REFFFTView<x> is the Reference FFT plot number.
<NR3> is the vertical cursor A position of the specified cursor in the specified view.

DisplayReffftviewItemCursorScreenBxposition ¶

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:REFFFTView<x>:CURSor:SCREEN:BXPOSition command.

Description

This command sets or queries the horizontal cursor B position of the specified cursor in the specified view.

Usage

Using the .query() method will send the DISplay:REFFFTView<x>:CURSor:SCREEN:BXPOSition? query.
Using the .verify(value) method will send the DISplay:REFFFTView<x>:CURSor:SCREEN:BXPOSition? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:REFFFTView<x>:CURSor:SCREEN:BXPOSition value command.

SCPI Syntax

- DISplay:REFFFTView<x>:CURSor:SCREEN:BXPOSition <NR3>
- DISplay:REFFFTView<x>:CURSor:SCREEN:BXPOSition?

Info

REFFFTView<x> is the Reference FFT plot number.
<NR3> is the horizontal cursor B position of the specified cursor in the specified view.

DisplayReffftviewItemCursorScreenByposition ¶

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:REFFFTView<x>:CURSor:SCREEN:BYPOSition command.

Description

This command sets or queries the vertical cursor B position of the specified cursor in the specified view.

Usage

Using the .query() method will send the DISplay:REFFFTView<x>:CURSor:SCREEN:BYPOSition? query.
Using the .verify(value) method will send the DISplay:REFFFTView<x>:CURSor:SCREEN:BYPOSition? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:REFFFTView<x>:CURSor:SCREEN:BYPOSition value command.

SCPI Syntax

- DISplay:REFFFTView<x>:CURSor:SCREEN:BYPOSition <NR3>
- DISplay:REFFFTView<x>:CURSor:SCREEN:BYPOSition?

Info

REFFFTView<x> is the Reference FFT plot number.
<NR3> is the vertical cursor B position of the specified cursor in the specified view.

DisplayReffftviewItemCursorSplitmode ¶

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:REFFFTView<x>:CURSor:SPLITMODE command.

Description

This command sets or queries whether both cursors have same or different source.

Usage

Using the .query() method will send the DISplay:REFFFTView<x>:CURSor:SPLITMODE? query.
Using the .verify(value) method will send the DISplay:REFFFTView<x>:CURSor:SPLITMODE? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:REFFFTView<x>:CURSor:SPLITMODE value command.

SCPI Syntax

- DISplay:REFFFTView<x>:CURSor:SPLITMODE {SAME|SPLIT}
- DISplay:REFFFTView<x>:CURSor:SPLITMODE?

Info

REFFFTView<x> is the Reference FFT plot number.
SAME specifies both cursors have the same sources.
SPLIT specifies both cursors have different sources.

DisplayReffftviewItemCursorState ¶

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:REFFFTView<x>:CURSor:STATE command.

Description

This command sets or queries the visible state of the cursor of the specified cursor in the specified view.

Usage

Using the .query() method will send the DISplay:REFFFTView<x>:CURSor:STATE? query.
Using the .verify(value) method will send the DISplay:REFFFTView<x>:CURSor:STATE? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:REFFFTView<x>:CURSor:STATE value command.

SCPI Syntax

- DISplay:REFFFTView<x>:CURSor:STATE {ON|OFF|1|0}
- DISplay:REFFFTView<x>:CURSor:STATE?

Info

REFFFTView<x> is the Reference FFT plot number.
OFF specifies the cursor is not visible.
ON displays the cursor.
0 specifies the cursor is not visible.
1 displays the cursor.

DisplayReffftviewItemCursorVbars ¶

Bases: SCPICmdRead

The DISplay:REFFFTView<x>:CURSor:VBArs command tree.

Usage

Using the .query() method will send the DISplay:REFFFTView<x>:CURSor:VBArs? query.
Using the .verify(value) method will send the DISplay:REFFFTView<x>:CURSor:VBArs? query and raise an AssertionError if the returned value does not match value.

Info

REFFFTView<x> is the Reference FFT plot number.

Properties

.aposition: The DISplay:REFFFTView<x>:CURSor:VBArs:APOSition command.
.bposition: The DISplay:REFFFTView<x>:CURSor:VBArs:BPOSition command.
.delta: The DISplay:REFFFTView<x>:CURSor:VBArs:DELTa command.
.units: The DISplay:REFFFTView<x>:CURSor:VBArs:UNIts command.

aposition `property` ¶

aposition: DisplayReffftviewItemCursorVbarsAposition

Return the DISplay:REFFFTView<x>:CURSor:VBArs:APOSition command.

Description

This command sets or queries the horizontal cursor A position of the specified cursor in the specified view.

Usage

Using the .query() method will send the DISplay:REFFFTView<x>:CURSor:VBArs:APOSition? query.
Using the .verify(value) method will send the DISplay:REFFFTView<x>:CURSor:VBArs:APOSition? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:REFFFTView<x>:CURSor:VBArs:APOSition value command.

SCPI Syntax

- DISplay:REFFFTView<x>:CURSor:VBArs:APOSition <NR3>
- DISplay:REFFFTView<x>:CURSor:VBArs:APOSition?

Info

REFFFTView<x> is the Reference FFT plot number.
<NR3> is the horizontal cursor A position of the specified cursor in the specified view.

bposition `property` ¶

bposition: DisplayReffftviewItemCursorVbarsBposition

Return the DISplay:REFFFTView<x>:CURSor:VBArs:BPOSition command.

Description

This command sets or queries the horizontal cursor B position of the specified cursor in the specified view.

Usage

Using the .query() method will send the DISplay:REFFFTView<x>:CURSor:VBArs:BPOSition? query.
Using the .verify(value) method will send the DISplay:REFFFTView<x>:CURSor:VBArs:BPOSition? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:REFFFTView<x>:CURSor:VBArs:BPOSition value command.

SCPI Syntax

- DISplay:REFFFTView<x>:CURSor:VBArs:BPOSition <NR3>
- DISplay:REFFFTView<x>:CURSor:VBArs:BPOSition?

Info

REFFFTView<x> is the Reference FFT plot number.
<NR3> is the horizontal cursor A position of the specified cursor in the specified view.

delta `property` ¶

delta: DisplayReffftviewItemCursorVbarsDelta

Return the DISplay:REFFFTView<x>:CURSor:VBArs:DELTa command.

Description

This command returns the delta T cursor readout value of the specified cursor in the specified view.

Usage

Using the .query() method will send the DISplay:REFFFTView<x>:CURSor:VBArs:DELTa? query.
Using the .verify(value) method will send the DISplay:REFFFTView<x>:CURSor:VBArs:DELTa? query and raise an AssertionError if the returned value does not match value.

SCPI Syntax

- DISplay:REFFFTView<x>:CURSor:VBArs:DELTa?

Info

REFFFTView<x> is the Reference FFT plot number.

units `property` ¶

units: DisplayReffftviewItemCursorVbarsUnits

Return the DISplay:REFFFTView<x>:CURSor:VBArs:UNIts command.

Description

This command returns cursor A vertical units of the specified cursor in the specified view.

Usage

Using the .query() method will send the DISplay:REFFFTView<x>:CURSor:VBArs:UNIts? query.
Using the .verify(value) method will send the DISplay:REFFFTView<x>:CURSor:VBArs:UNIts? query and raise an AssertionError if the returned value does not match value.

SCPI Syntax

- DISplay:REFFFTView<x>:CURSor:VBArs:UNIts?

Info

REFFFTView<x> is the Reference FFT plot number.

DisplayReffftviewItemCursorVbarsAposition ¶

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:REFFFTView<x>:CURSor:VBArs:APOSition command.

Description

This command sets or queries the horizontal cursor A position of the specified cursor in the specified view.

Usage

Using the .query() method will send the DISplay:REFFFTView<x>:CURSor:VBArs:APOSition? query.
Using the .verify(value) method will send the DISplay:REFFFTView<x>:CURSor:VBArs:APOSition? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:REFFFTView<x>:CURSor:VBArs:APOSition value command.

SCPI Syntax

- DISplay:REFFFTView<x>:CURSor:VBArs:APOSition <NR3>
- DISplay:REFFFTView<x>:CURSor:VBArs:APOSition?

Info

REFFFTView<x> is the Reference FFT plot number.
<NR3> is the horizontal cursor A position of the specified cursor in the specified view.

DisplayReffftviewItemCursorVbarsBposition ¶

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:REFFFTView<x>:CURSor:VBArs:BPOSition command.

Description

This command sets or queries the horizontal cursor B position of the specified cursor in the specified view.

Usage

Using the .query() method will send the DISplay:REFFFTView<x>:CURSor:VBArs:BPOSition? query.
Using the .verify(value) method will send the DISplay:REFFFTView<x>:CURSor:VBArs:BPOSition? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:REFFFTView<x>:CURSor:VBArs:BPOSition value command.

SCPI Syntax

- DISplay:REFFFTView<x>:CURSor:VBArs:BPOSition <NR3>
- DISplay:REFFFTView<x>:CURSor:VBArs:BPOSition?

Info

REFFFTView<x> is the Reference FFT plot number.
<NR3> is the horizontal cursor A position of the specified cursor in the specified view.

DisplayReffftviewItemCursorVbarsDelta ¶

Bases: SCPICmdRead

The DISplay:REFFFTView<x>:CURSor:VBArs:DELTa command.

Description

This command returns the delta T cursor readout value of the specified cursor in the specified view.

Usage

Using the .query() method will send the DISplay:REFFFTView<x>:CURSor:VBArs:DELTa? query.
Using the .verify(value) method will send the DISplay:REFFFTView<x>:CURSor:VBArs:DELTa? query and raise an AssertionError if the returned value does not match value.

SCPI Syntax

- DISplay:REFFFTView<x>:CURSor:VBArs:DELTa?

Info

REFFFTView<x> is the Reference FFT plot number.

DisplayReffftviewItemCursorVbarsUnits ¶

Bases: SCPICmdRead

The DISplay:REFFFTView<x>:CURSor:VBArs:UNIts command.

Description

This command returns cursor A vertical units of the specified cursor in the specified view.

Usage

Using the .query() method will send the DISplay:REFFFTView<x>:CURSor:VBArs:UNIts? query.
Using the .verify(value) method will send the DISplay:REFFFTView<x>:CURSor:VBArs:UNIts? query and raise an AssertionError if the returned value does not match value.

SCPI Syntax

- DISplay:REFFFTView<x>:CURSor:VBArs:UNIts?

Info

REFFFTView<x> is the Reference FFT plot number.

DisplayReffftviewItemCursorWaveform ¶

Bases: SCPICmdRead

The DISplay:REFFFTView<x>:CURSor:WAVEform command tree.

Usage

Using the .query() method will send the DISplay:REFFFTView<x>:CURSor:WAVEform? query.
Using the .verify(value) method will send the DISplay:REFFFTView<x>:CURSor:WAVEform? query and raise an AssertionError if the returned value does not match value.

Info

REFFFTView<x> is the Reference FFT plot number.

Properties

.ahposition: The DISplay:REFFFTView<x>:CURSor:WAVEform:AHPOSition command.
.aposition: The DISplay:REFFFTView<x>:CURSor:WAVEform:APOSition command.
.avposition: The DISplay:REFFFTView<x>:CURSor:WAVEform:AVPOSition command.
.bhposition: The DISplay:REFFFTView<x>:CURSor:WAVEform:BHPOSition command.
.bposition: The DISplay:REFFFTView<x>:CURSor:WAVEform:BPOSition command.
.bvposition: The DISplay:REFFFTView<x>:CURSor:WAVEform:BVPOSition command.

ahposition `property` ¶

ahposition: DisplayReffftviewItemCursorWaveformAhposition

Return the DISplay:REFFFTView<x>:CURSor:WAVEform:AHPOSition command.

Description

This query-only command returns the value of the cursor A horizontal position.

Usage

Using the .query() method will send the DISplay:REFFFTView<x>:CURSor:WAVEform:AHPOSition? query.
Using the .verify(value) method will send the DISplay:REFFFTView<x>:CURSor:WAVEform:AHPOSition? query and raise an AssertionError if the returned value does not match value.

SCPI Syntax

- DISplay:REFFFTView<x>:CURSor:WAVEform:AHPOSition?

Info

REFFFTView<x> is the Reference FFT plot number.

aposition `property` ¶

aposition: DisplayReffftviewItemCursorWaveformAposition

Return the DISplay:REFFFTView<x>:CURSor:WAVEform:APOSition command.

Description

Sets or returns the waveform cursor A position in the specified plot view. Note: In case of an XY plot, this command has no effect when used to set the value. In the case of a bathtub plot, this command sets or queries the cursor A vertical position. For all other plots, this command sets or queries the cursor A horizontal position.

Usage

Using the .query() method will send the DISplay:REFFFTView<x>:CURSor:WAVEform:APOSition? query.
Using the .verify(value) method will send the DISplay:REFFFTView<x>:CURSor:WAVEform:APOSition? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:REFFFTView<x>:CURSor:WAVEform:APOSition value command.

SCPI Syntax

- DISplay:REFFFTView<x>:CURSor:WAVEform:APOSition <NR3>
- DISplay:REFFFTView<x>:CURSor:WAVEform:APOSition?

Info

REFFFTView<x> is the Reference FFT plot number.
<NR3> is the waveform cursor A position in the specified plot view.

avposition `property` ¶

avposition: DisplayReffftviewItemCursorWaveformAvposition

Return the DISplay:REFFFTView<x>:CURSor:WAVEform:AVPOSition command.

Description

This query-only command returns the value of the cursor A vertical position.

Usage

Using the .query() method will send the DISplay:REFFFTView<x>:CURSor:WAVEform:AVPOSition? query.
Using the .verify(value) method will send the DISplay:REFFFTView<x>:CURSor:WAVEform:AVPOSition? query and raise an AssertionError if the returned value does not match value.

SCPI Syntax

- DISplay:REFFFTView<x>:CURSor:WAVEform:AVPOSition?

Info

REFFFTView<x> is the Reference FFT plot number.

bhposition `property` ¶

bhposition: DisplayReffftviewItemCursorWaveformBhposition

Return the DISplay:REFFFTView<x>:CURSor:WAVEform:BHPOSition command.

Description

This query-only command returns the value of the cursor B horizontal position.

Usage

Using the .query() method will send the DISplay:REFFFTView<x>:CURSor:WAVEform:BHPOSition? query.
Using the .verify(value) method will send the DISplay:REFFFTView<x>:CURSor:WAVEform:BHPOSition? query and raise an AssertionError if the returned value does not match value.

SCPI Syntax

- DISplay:REFFFTView<x>:CURSor:WAVEform:BHPOSition?

Info

REFFFTView<x> is the Reference FFT plot number.
OFF specifies the cursor is not visible.
0 specifies the cursor is not visible.
ON displays the cursor.
1 displays the cursor.

bposition `property` ¶

bposition: DisplayReffftviewItemCursorWaveformBposition

Return the DISplay:REFFFTView<x>:CURSor:WAVEform:BPOSition command.

Description

Sets or returns the waveform cursor B position in the specified plot view. Note: In case of an XY plot, this command has no effect when used to set the value. In the case of a bathtub plot, this command has no effect. Queries return invalid values. For all other plots, this command sets or queries the cursor B horizontal position.

Usage

Using the .query() method will send the DISplay:REFFFTView<x>:CURSor:WAVEform:BPOSition? query.
Using the .verify(value) method will send the DISplay:REFFFTView<x>:CURSor:WAVEform:BPOSition? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:REFFFTView<x>:CURSor:WAVEform:BPOSition value command.

SCPI Syntax

- DISplay:REFFFTView<x>:CURSor:WAVEform:BPOSition <NR3>
- DISplay:REFFFTView<x>:CURSor:WAVEform:BPOSition?

Info

REFFFTView<x> is the Reference FFT plot number.
<NR3> is the waveform cursor B position in the specified plot view.

bvposition `property` ¶

bvposition: DisplayReffftviewItemCursorWaveformBvposition

Return the DISplay:REFFFTView<x>:CURSor:WAVEform:BVPOSition command.

Description

This query-only command returns the value of the cursor B vertical position.

Usage

Using the .query() method will send the DISplay:REFFFTView<x>:CURSor:WAVEform:BVPOSition? query.
Using the .verify(value) method will send the DISplay:REFFFTView<x>:CURSor:WAVEform:BVPOSition? query and raise an AssertionError if the returned value does not match value.

SCPI Syntax

- DISplay:REFFFTView<x>:CURSor:WAVEform:BVPOSition?

Info

REFFFTView<x> is the Reference FFT plot number.

DisplayReffftviewItemCursorWaveformAhposition ¶

Bases: SCPICmdRead

The DISplay:REFFFTView<x>:CURSor:WAVEform:AHPOSition command.

Description

This query-only command returns the value of the cursor A horizontal position.

Usage

Using the .query() method will send the DISplay:REFFFTView<x>:CURSor:WAVEform:AHPOSition? query.
Using the .verify(value) method will send the DISplay:REFFFTView<x>:CURSor:WAVEform:AHPOSition? query and raise an AssertionError if the returned value does not match value.

SCPI Syntax

- DISplay:REFFFTView<x>:CURSor:WAVEform:AHPOSition?

Info

REFFFTView<x> is the Reference FFT plot number.

DisplayReffftviewItemCursorWaveformAposition ¶

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:REFFFTView<x>:CURSor:WAVEform:APOSition command.

Description

Sets or returns the waveform cursor A position in the specified plot view. Note: In case of an XY plot, this command has no effect when used to set the value. In the case of a bathtub plot, this command sets or queries the cursor A vertical position. For all other plots, this command sets or queries the cursor A horizontal position.

Usage

Using the .query() method will send the DISplay:REFFFTView<x>:CURSor:WAVEform:APOSition? query.
Using the .verify(value) method will send the DISplay:REFFFTView<x>:CURSor:WAVEform:APOSition? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:REFFFTView<x>:CURSor:WAVEform:APOSition value command.

SCPI Syntax

- DISplay:REFFFTView<x>:CURSor:WAVEform:APOSition <NR3>
- DISplay:REFFFTView<x>:CURSor:WAVEform:APOSition?

Info

REFFFTView<x> is the Reference FFT plot number.
<NR3> is the waveform cursor A position in the specified plot view.

DisplayReffftviewItemCursorWaveformAvposition ¶

Bases: SCPICmdRead

The DISplay:REFFFTView<x>:CURSor:WAVEform:AVPOSition command.

Description

This query-only command returns the value of the cursor A vertical position.

Usage

Using the .query() method will send the DISplay:REFFFTView<x>:CURSor:WAVEform:AVPOSition? query.
Using the .verify(value) method will send the DISplay:REFFFTView<x>:CURSor:WAVEform:AVPOSition? query and raise an AssertionError if the returned value does not match value.

SCPI Syntax

- DISplay:REFFFTView<x>:CURSor:WAVEform:AVPOSition?

Info

REFFFTView<x> is the Reference FFT plot number.

DisplayReffftviewItemCursorWaveformBhposition ¶

Bases: SCPICmdRead

The DISplay:REFFFTView<x>:CURSor:WAVEform:BHPOSition command.

Description

This query-only command returns the value of the cursor B horizontal position.

Usage

Using the .query() method will send the DISplay:REFFFTView<x>:CURSor:WAVEform:BHPOSition? query.
Using the .verify(value) method will send the DISplay:REFFFTView<x>:CURSor:WAVEform:BHPOSition? query and raise an AssertionError if the returned value does not match value.

SCPI Syntax

- DISplay:REFFFTView<x>:CURSor:WAVEform:BHPOSition?

Info

REFFFTView<x> is the Reference FFT plot number.
OFF specifies the cursor is not visible.
0 specifies the cursor is not visible.
ON displays the cursor.
1 displays the cursor.

DisplayReffftviewItemCursorWaveformBposition ¶

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:REFFFTView<x>:CURSor:WAVEform:BPOSition command.

Description

Sets or returns the waveform cursor B position in the specified plot view. Note: In case of an XY plot, this command has no effect when used to set the value. In the case of a bathtub plot, this command has no effect. Queries return invalid values. For all other plots, this command sets or queries the cursor B horizontal position.

Usage

Using the .query() method will send the DISplay:REFFFTView<x>:CURSor:WAVEform:BPOSition? query.
Using the .verify(value) method will send the DISplay:REFFFTView<x>:CURSor:WAVEform:BPOSition? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:REFFFTView<x>:CURSor:WAVEform:BPOSition value command.

SCPI Syntax

- DISplay:REFFFTView<x>:CURSor:WAVEform:BPOSition <NR3>
- DISplay:REFFFTView<x>:CURSor:WAVEform:BPOSition?

Info

REFFFTView<x> is the Reference FFT plot number.
<NR3> is the waveform cursor B position in the specified plot view.

DisplayReffftviewItemCursorWaveformBvposition ¶

Bases: SCPICmdRead

The DISplay:REFFFTView<x>:CURSor:WAVEform:BVPOSition command.

Description

This query-only command returns the value of the cursor B vertical position.

Usage

Using the .query() method will send the DISplay:REFFFTView<x>:CURSor:WAVEform:BVPOSition? query.
Using the .verify(value) method will send the DISplay:REFFFTView<x>:CURSor:WAVEform:BVPOSition? query and raise an AssertionError if the returned value does not match value.

SCPI Syntax

- DISplay:REFFFTView<x>:CURSor:WAVEform:BVPOSition?

Info

REFFFTView<x> is the Reference FFT plot number.

DisplayReffftviewItemGridlines ¶

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:REFFFTView<x>:GRIDlines command.

Description

This command sets or returns the grid lines setting of the plot.

Usage

Using the .query() method will send the DISplay:REFFFTView<x>:GRIDlines? query.
Using the .verify(value) method will send the DISplay:REFFFTView<x>:GRIDlines? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:REFFFTView<x>:GRIDlines value command.

SCPI Syntax

- DISplay:REFFFTView<x>:GRIDlines {HORizontal|VERTical|BOTH}
- DISplay:REFFFTView<x>:GRIDlines?

Info

REFFFTView<x> is the Reference FFT plot number.
HORizontal specifies horizontal grid lines.
VERTical specifies vertical grid lines.
BOTH specifies both horizontal and vertical grid lines.

DisplayReffftviewItemRef ¶

Bases: SCPICmdRead

The DISplay:REFFFTView<x>:REF command tree.

Usage

Using the .query() method will send the DISplay:REFFFTView<x>:REF? query.
Using the .verify(value) method will send the DISplay:REFFFTView<x>:REF? query and raise an AssertionError if the returned value does not match value.

Info

REFFFTView<x> is the Reference FFT plot number.

Properties

.ref: The DISplay:REFFFTView<x>:REF:REF<x> command tree.

ref `property` ¶

ref: dict[int, DisplayReffftviewItemRefRefItem]

Return the DISplay:REFFFTView<x>:REF:REF<x> command tree.

Usage

Using the .query() method will send the DISplay:REFFFTView<x>:REF:REF<x>? query.
Using the .verify(value) method will send the DISplay:REFFFTView<x>:REF:REF<x>? query and raise an AssertionError if the returned value does not match value.

Info

REFFFTView<x> is the Reference FFT plot number.

Sub-properties

.state: The DISplay:REFFFTView<x>:REF:REF<x>:STATE command.

DisplayReffftviewItemRefRefItem ¶

Bases: ValidatedDynamicNumberCmd, SCPICmdRead

The DISplay:REFFFTView<x>:REF:REF<x> command tree.

Usage

Using the .query() method will send the DISplay:REFFFTView<x>:REF:REF<x>? query.
Using the .verify(value) method will send the DISplay:REFFFTView<x>:REF:REF<x>? query and raise an AssertionError if the returned value does not match value.

Info

REFFFTView<x> is the Reference FFT plot number.

Properties

.state: The DISplay:REFFFTView<x>:REF:REF<x>:STATE command.

state `property` ¶

state: DisplayReffftviewItemRefRefItemState

Return the DISplay:REFFFTView<x>:REF:REF<x>:STATE command.

Description

This command sets or queries the state of the specified reference waveform in the specified Waveform View.

Usage

Using the .query() method will send the DISplay:REFFFTView<x>:REF:REF<x>:STATE? query.
Using the .verify(value) method will send the DISplay:REFFFTView<x>:REF:REF<x>:STATE? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:REFFFTView<x>:REF:REF<x>:STATE value command.

SCPI Syntax

- DISplay:REFFFTView<x>:REF:REF<x>:STATE {ON|OFF|1|0}
- DISplay:REFFFTView<x>:REF:REF<x>:STATE?

Info

REFFFTView<x> is the Reference FFT plot number.
OFF disables the display the specified reference.
0 disables the display the specified reference.
ON enables the specified reference.
1 enables the specified reference.

DisplayReffftviewItemRefRefItemState ¶

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:REFFFTView<x>:REF:REF<x>:STATE command.

Description

This command sets or queries the state of the specified reference waveform in the specified Waveform View.

Usage

Using the .query() method will send the DISplay:REFFFTView<x>:REF:REF<x>:STATE? query.
Using the .verify(value) method will send the DISplay:REFFFTView<x>:REF:REF<x>:STATE? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:REFFFTView<x>:REF:REF<x>:STATE value command.

SCPI Syntax

- DISplay:REFFFTView<x>:REF:REF<x>:STATE {ON|OFF|1|0}
- DISplay:REFFFTView<x>:REF:REF<x>:STATE?

Info

REFFFTView<x> is the Reference FFT plot number.
OFF disables the display the specified reference.
0 disables the display the specified reference.
ON enables the specified reference.
1 enables the specified reference.

DisplayReffftviewItemXaxis ¶

Bases: SCPICmdRead

The DISplay:REFFFTView<x>:XAXIS command tree.

Usage

Using the .query() method will send the DISplay:REFFFTView<x>:XAXIS? query.
Using the .verify(value) method will send the DISplay:REFFFTView<x>:XAXIS? query and raise an AssertionError if the returned value does not match value.

Properties

.scale: The DISplay:REFFFTView<x>:XAXIS:SCALE command.

scale `property` ¶

scale: DisplayReffftviewItemXaxisScale

Return the DISplay:REFFFTView<x>:XAXIS:SCALE command.

Description

This command sets or queries the x-axis scale setting for Ref FFT.

Usage

Using the .query() method will send the DISplay:REFFFTView<x>:XAXIS:SCALE? query.
Using the .verify(value) method will send the DISplay:REFFFTView<x>:XAXIS:SCALE? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:REFFFTView<x>:XAXIS:SCALE value command.

SCPI Syntax

- DISplay:REFFFTView<x>:XAXIS:SCALE {LINEAr|LOG}
- DISplay:REFFFTView<x>:XAXIS:SCALE?

Info

LINEAr specifies a linear scale.
LOG specifies a logarithmic scale.

DisplayReffftviewItemXaxisScale ¶

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:REFFFTView<x>:XAXIS:SCALE command.

Description

This command sets or queries the x-axis scale setting for Ref FFT.

Usage

Using the .query() method will send the DISplay:REFFFTView<x>:XAXIS:SCALE? query.
Using the .verify(value) method will send the DISplay:REFFFTView<x>:XAXIS:SCALE? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:REFFFTView<x>:XAXIS:SCALE value command.

SCPI Syntax

- DISplay:REFFFTView<x>:XAXIS:SCALE {LINEAr|LOG}
- DISplay:REFFFTView<x>:XAXIS:SCALE?

Info

LINEAr specifies a linear scale.
LOG specifies a logarithmic scale.

DisplayReffftviewItemZoom ¶

Bases: SCPICmdRead

The DISplay:REFFFTView<x>:ZOOM command tree.

Usage

Using the .query() method will send the DISplay:REFFFTView<x>:ZOOM? query.
Using the .verify(value) method will send the DISplay:REFFFTView<x>:ZOOM? query and raise an AssertionError if the returned value does not match value.

Properties

.xaxis: The DISplay:REFFFTView<x>:ZOOM:XAXIS command tree.
.yaxis: The DISplay:REFFFTView<x>:ZOOM:YAXIS command tree.

xaxis `property` ¶

xaxis: DisplayReffftviewItemZoomXaxis

Return the DISplay:REFFFTView<x>:ZOOM:XAXIS command tree.

Usage

Using the .query() method will send the DISplay:REFFFTView<x>:ZOOM:XAXIS? query.
Using the .verify(value) method will send the DISplay:REFFFTView<x>:ZOOM:XAXIS? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.from: The DISplay:REFFFTView<x>:ZOOM:XAXIS:FROM command.
.to: The DISplay:REFFFTView<x>:ZOOM:XAXIS:TO command.

yaxis `property` ¶

yaxis: DisplayReffftviewItemZoomYaxis

Return the DISplay:REFFFTView<x>:ZOOM:YAXIS command tree.

Usage

Using the .query() method will send the DISplay:REFFFTView<x>:ZOOM:YAXIS? query.
Using the .verify(value) method will send the DISplay:REFFFTView<x>:ZOOM:YAXIS? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.from: The DISplay:REFFFTView<x>:ZOOM:YAXIS:FROM command.
.to: The DISplay:REFFFTView<x>:ZOOM:YAXIS:TO command.

DisplayReffftviewItemZoomXaxis ¶

Bases: SCPICmdRead

The DISplay:REFFFTView<x>:ZOOM:XAXIS command tree.

Usage

Using the .query() method will send the DISplay:REFFFTView<x>:ZOOM:XAXIS? query.
Using the .verify(value) method will send the DISplay:REFFFTView<x>:ZOOM:XAXIS? query and raise an AssertionError if the returned value does not match value.

Properties

.from: The DISplay:REFFFTView<x>:ZOOM:XAXIS:FROM command.
.to: The DISplay:REFFFTView<x>:ZOOM:XAXIS:TO command.

from_ `property` ¶

from_: DisplayReffftviewItemZoomXaxisFrom

Return the DISplay:REFFFTView<x>:ZOOM:XAXIS:FROM command.

Description

This command sets or returns the left edge of the zoom x-axis in the specified plot view.

Usage

Using the .query() method will send the DISplay:REFFFTView<x>:ZOOM:XAXIS:FROM? query.
Using the .verify(value) method will send the DISplay:REFFFTView<x>:ZOOM:XAXIS:FROM? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:REFFFTView<x>:ZOOM:XAXIS:FROM value command.

SCPI Syntax

- DISplay:REFFFTView<x>:ZOOM:XAXIS:FROM <NR3>
- DISplay:REFFFTView<x>:ZOOM:XAXIS:FROM?

Info

<NR3> is the left edge of the zoom x-axis in the specified plot view.

to `property` ¶

to: DisplayReffftviewItemZoomXaxisTo

Return the DISplay:REFFFTView<x>:ZOOM:XAXIS:TO command.

Description

This command sets or queries the right edge of the zoom x-axis in the specified plot view.

Usage

Using the .query() method will send the DISplay:REFFFTView<x>:ZOOM:XAXIS:TO? query.
Using the .verify(value) method will send the DISplay:REFFFTView<x>:ZOOM:XAXIS:TO? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:REFFFTView<x>:ZOOM:XAXIS:TO value command.

SCPI Syntax

- DISplay:REFFFTView<x>:ZOOM:XAXIS:TO <NR3>
- DISplay:REFFFTView<x>:ZOOM:XAXIS:TO?

Info

<NR3> is the right edge of the zoom x-axis in the specified plot view.

DisplayReffftviewItemZoomXaxisFrom ¶

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:REFFFTView<x>:ZOOM:XAXIS:FROM command.

Description

This command sets or returns the left edge of the zoom x-axis in the specified plot view.

Usage

Using the .query() method will send the DISplay:REFFFTView<x>:ZOOM:XAXIS:FROM? query.
Using the .verify(value) method will send the DISplay:REFFFTView<x>:ZOOM:XAXIS:FROM? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:REFFFTView<x>:ZOOM:XAXIS:FROM value command.

SCPI Syntax

- DISplay:REFFFTView<x>:ZOOM:XAXIS:FROM <NR3>
- DISplay:REFFFTView<x>:ZOOM:XAXIS:FROM?

Info

<NR3> is the left edge of the zoom x-axis in the specified plot view.

DisplayReffftviewItemZoomXaxisTo ¶

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:REFFFTView<x>:ZOOM:XAXIS:TO command.

Description

This command sets or queries the right edge of the zoom x-axis in the specified plot view.

Usage

Using the .query() method will send the DISplay:REFFFTView<x>:ZOOM:XAXIS:TO? query.
Using the .verify(value) method will send the DISplay:REFFFTView<x>:ZOOM:XAXIS:TO? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:REFFFTView<x>:ZOOM:XAXIS:TO value command.

SCPI Syntax

- DISplay:REFFFTView<x>:ZOOM:XAXIS:TO <NR3>
- DISplay:REFFFTView<x>:ZOOM:XAXIS:TO?

Info

<NR3> is the right edge of the zoom x-axis in the specified plot view.

DisplayReffftviewItemZoomYaxis ¶

Bases: SCPICmdRead

The DISplay:REFFFTView<x>:ZOOM:YAXIS command tree.

Usage

Using the .query() method will send the DISplay:REFFFTView<x>:ZOOM:YAXIS? query.
Using the .verify(value) method will send the DISplay:REFFFTView<x>:ZOOM:YAXIS? query and raise an AssertionError if the returned value does not match value.

Properties

.from: The DISplay:REFFFTView<x>:ZOOM:YAXIS:FROM command.
.to: The DISplay:REFFFTView<x>:ZOOM:YAXIS:TO command.

from_ `property` ¶

from_: DisplayReffftviewItemZoomYaxisFrom

Return the DISplay:REFFFTView<x>:ZOOM:YAXIS:FROM command.

Description

This command sets or queries the bottom value of the zoom y-axis in the specified plot view.

Usage

Using the .query() method will send the DISplay:REFFFTView<x>:ZOOM:YAXIS:FROM? query.
Using the .verify(value) method will send the DISplay:REFFFTView<x>:ZOOM:YAXIS:FROM? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:REFFFTView<x>:ZOOM:YAXIS:FROM value command.

SCPI Syntax

- DISplay:REFFFTView<x>:ZOOM:YAXIS:FROM <NR3>
- DISplay:REFFFTView<x>:ZOOM:YAXIS:FROM?

Info

<NR3> is the bottom value of the zoom y-axis in the specified plot view.

to `property` ¶

to: DisplayReffftviewItemZoomYaxisTo

Return the DISplay:REFFFTView<x>:ZOOM:YAXIS:TO command.

Description

This command sets or queries the top value of the zoom y-axis in the specified plot view.

Usage

Using the .query() method will send the DISplay:REFFFTView<x>:ZOOM:YAXIS:TO? query.
Using the .verify(value) method will send the DISplay:REFFFTView<x>:ZOOM:YAXIS:TO? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:REFFFTView<x>:ZOOM:YAXIS:TO value command.

SCPI Syntax

- DISplay:REFFFTView<x>:ZOOM:YAXIS:TO <NR3>
- DISplay:REFFFTView<x>:ZOOM:YAXIS:TO?

Info

<NR3> is the top value of the zoom y-axis in the specified plot view.

DisplayReffftviewItemZoomYaxisFrom ¶

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:REFFFTView<x>:ZOOM:YAXIS:FROM command.

Description

This command sets or queries the bottom value of the zoom y-axis in the specified plot view.

Usage

Using the .query() method will send the DISplay:REFFFTView<x>:ZOOM:YAXIS:FROM? query.
Using the .verify(value) method will send the DISplay:REFFFTView<x>:ZOOM:YAXIS:FROM? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:REFFFTView<x>:ZOOM:YAXIS:FROM value command.

SCPI Syntax

- DISplay:REFFFTView<x>:ZOOM:YAXIS:FROM <NR3>
- DISplay:REFFFTView<x>:ZOOM:YAXIS:FROM?

Info

<NR3> is the bottom value of the zoom y-axis in the specified plot view.

DisplayReffftviewItemZoomYaxisTo ¶

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:REFFFTView<x>:ZOOM:YAXIS:TO command.

Description

This command sets or queries the top value of the zoom y-axis in the specified plot view.

Usage

Using the .query() method will send the DISplay:REFFFTView<x>:ZOOM:YAXIS:TO? query.
Using the .verify(value) method will send the DISplay:REFFFTView<x>:ZOOM:YAXIS:TO? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:REFFFTView<x>:ZOOM:YAXIS:TO value command.

SCPI Syntax

- DISplay:REFFFTView<x>:ZOOM:YAXIS:TO <NR3>
- DISplay:REFFFTView<x>:ZOOM:YAXIS:TO?

Info

<NR3> is the top value of the zoom y-axis in the specified plot view.

DisplaySelect ¶

Bases: SCPICmdRead

The DISplay:SELect command tree.

Usage

Using the .query() method will send the DISplay:SELect? query.
Using the .verify(value) method will send the DISplay:SELect? query and raise an AssertionError if the returned value does not match value.

Properties

.bus: The DISplay:SELect:BUS command.
.math: The DISplay:SELect:MATH command.
.reference: The DISplay:SELect:REFerence command.
.source: The DISplay:SELect:SOUrce command.
.specview1: The DISplay:SELect:SPECView1 command tree.
.view: The DISplay:SELect:VIEW command.
.waveview1: The DISplay:SELect:WAVEView1 command tree.

bus `property` ¶

bus: DisplaySelectBus

Return the DISplay:SELect:BUS command.

Description

This command sets or queries the overall selected bus. Sets are applied to all views that contain the source and the selected view is changed. When multiple buses are open, querying the command gives the correct result, but the bus cannot set.

Usage

Using the .query() method will send the DISplay:SELect:BUS? query.
Using the .verify(value) method will send the DISplay:SELect:BUS? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:SELect:BUS value command.

SCPI Syntax

- DISplay:SELect:BUS BUS<x>
- DISplay:SELect:BUS?

Info

BUS<x> is the selected bus.

math `property` ¶

math: DisplaySelectMath

Return the DISplay:SELect:MATH command.

Description

This command sets or queries the overall selected math. Sets are applied to all views that contain the source and the selected view is changed. When multiple Math are open, querying the command gives the correct result, but the required Math cannot be set.

Usage

Using the .query() method will send the DISplay:SELect:MATH? query.
Using the .verify(value) method will send the DISplay:SELect:MATH? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:SELect:MATH value command.

SCPI Syntax

- DISplay:SELect:MATH MATH<x>
- DISplay:SELect:MATH?

Info

MATH<x> is the selected math.

reference `property` ¶

reference: DisplaySelectReference

Return the DISplay:SELect:REFerence command.

Description

This command sets or queries the overall selected reference waveform. Sets are applied to all views that contain the source and the selected view is changed.

Usage

Using the .write(value) method will send the DISplay:SELect:REFerence value command.

SCPI Syntax

- DISplay:SELect:REFerence {NONE|REF<x>}

Info

NONE specifies no reference waveforms.
REF<x> specifies the reference waveform.

source `property` ¶

source: DisplaySelectSource

Return the DISplay:SELect:SOUrce command.

Description

This command sets or queries the overall selected source. Sets are applied to all views that contain the source and the selected view is changed.

Usage

Using the .query() method will send the DISplay:SELect:SOUrce? query.
Using the .verify(value) method will send the DISplay:SELect:SOUrce? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:SELect:SOUrce value command.

SCPI Syntax

- DISplay:SELect:SOUrce {NONE|CH<x>|BUS<x>|MATH<x>|PLOT<x>|REF<x>}
- DISplay:SELect:SOUrce?

Info

NONE specifies no source.
CH<x> specifies an analog channel as source.
BUS<x> specifies a bus as source.
MATH<x> specifies a math channel as source.
PLOT<x> specifies a plot as the source.
REF<x> specifies a reference waveform as the source.

specview1 `property` ¶

specview1: DisplaySelectSpecview1

Return the DISplay:SELect:SPECView1 command tree.

Usage

Using the .query() method will send the DISplay:SELect:SPECView1? query.
Using the .verify(value) method will send the DISplay:SELect:SPECView1? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.source: The DISplay:SELect:SPECView1:SOUrce command.

view `property` ¶

view: DisplaySelectView

Return the DISplay:SELect:VIEW command.

Description

This command sets or queries the selected view.

Usage

Using the .write(value) method will send the DISplay:SELect:VIEW value command.

SCPI Syntax

- DISplay:SELect:VIEW {WAVEVIEW1|MATHFFT<x>|PLOTVIEW<x>|REFFFT<x>}

Info

WAVEVIEW1 sets WAVEVIEW as the selected view.
MATHFFT<x> sets MATHFFT as the selected view.
PLOTVIEW<x> sets PLOTVIEW as the selected view.
REFFFT<x> sets REFFFT as the selected view.

waveview1 `property` ¶

waveview1: DisplaySelectWaveview1

Return the DISplay:SELect:WAVEView1 command tree.

Usage

Using the .query() method will send the DISplay:SELect:WAVEView1? query.
Using the .verify(value) method will send the DISplay:SELect:WAVEView1? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.source: The DISplay:SELect:WAVEView1:SOUrce command.

DisplaySelectBus ¶

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:SELect:BUS command.

Description

This command sets or queries the overall selected bus. Sets are applied to all views that contain the source and the selected view is changed. When multiple buses are open, querying the command gives the correct result, but the bus cannot set.

Usage

Using the .query() method will send the DISplay:SELect:BUS? query.
Using the .verify(value) method will send the DISplay:SELect:BUS? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:SELect:BUS value command.

SCPI Syntax

- DISplay:SELect:BUS BUS<x>
- DISplay:SELect:BUS?

Info

BUS<x> is the selected bus.

DisplaySelectMath ¶

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:SELect:MATH command.

Description

This command sets or queries the overall selected math. Sets are applied to all views that contain the source and the selected view is changed. When multiple Math are open, querying the command gives the correct result, but the required Math cannot be set.

Usage

Using the .query() method will send the DISplay:SELect:MATH? query.
Using the .verify(value) method will send the DISplay:SELect:MATH? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:SELect:MATH value command.

SCPI Syntax

- DISplay:SELect:MATH MATH<x>
- DISplay:SELect:MATH?

Info

MATH<x> is the selected math.

DisplaySelectReference ¶

Bases: SCPICmdWrite

The DISplay:SELect:REFerence command.

Description

This command sets or queries the overall selected reference waveform. Sets are applied to all views that contain the source and the selected view is changed.

Usage

Using the .write(value) method will send the DISplay:SELect:REFerence value command.

SCPI Syntax

- DISplay:SELect:REFerence {NONE|REF<x>}

Info

NONE specifies no reference waveforms.
REF<x> specifies the reference waveform.

DisplaySelectSource ¶

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:SELect:SOUrce command.

Description

This command sets or queries the overall selected source. Sets are applied to all views that contain the source and the selected view is changed.

Usage

Using the .query() method will send the DISplay:SELect:SOUrce? query.
Using the .verify(value) method will send the DISplay:SELect:SOUrce? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:SELect:SOUrce value command.

SCPI Syntax

- DISplay:SELect:SOUrce {NONE|CH<x>|BUS<x>|MATH<x>|PLOT<x>|REF<x>}
- DISplay:SELect:SOUrce?

Info

NONE specifies no source.
CH<x> specifies an analog channel as source.
BUS<x> specifies a bus as source.
MATH<x> specifies a math channel as source.
PLOT<x> specifies a plot as the source.
REF<x> specifies a reference waveform as the source.

DisplaySelectSpecview1 ¶

Bases: SCPICmdRead

The DISplay:SELect:SPECView1 command tree.

Usage

Using the .query() method will send the DISplay:SELect:SPECView1? query.
Using the .verify(value) method will send the DISplay:SELect:SPECView1? query and raise an AssertionError if the returned value does not match value.

Properties

.source: The DISplay:SELect:SPECView1:SOUrce command.

source `property` ¶

source: DisplaySelectSpecview1Source

Return the DISplay:SELect:SPECView1:SOUrce command.

Description

This command sets or queries the spectrum trace (source channel) to select in the Spectrum View window.

Usage

Using the .query() method will send the DISplay:SELect:SPECView1:SOUrce? query.
Using the .verify(value) method will send the DISplay:SELect:SPECView1:SOUrce? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:SELect:SPECView1:SOUrce value command.

SCPI Syntax

- DISplay:SELect:SPECView1:SOUrce {CH<x>}
- DISplay:SELect:SPECView1:SOUrce?

Info

1 specifies the Spectrum View number. is always 1.
CH<x> specifies the spectrum trace (source channel) to select (make active) in the Spectrum View.

DisplaySelectSpecview1Source ¶

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:SELect:SPECView1:SOUrce command.

Description

This command sets or queries the spectrum trace (source channel) to select in the Spectrum View window.

Usage

Using the .query() method will send the DISplay:SELect:SPECView1:SOUrce? query.
Using the .verify(value) method will send the DISplay:SELect:SPECView1:SOUrce? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:SELect:SPECView1:SOUrce value command.

SCPI Syntax

- DISplay:SELect:SPECView1:SOUrce {CH<x>}
- DISplay:SELect:SPECView1:SOUrce?

Info

1 specifies the Spectrum View number. is always 1.
CH<x> specifies the spectrum trace (source channel) to select (make active) in the Spectrum View.

DisplaySelectView ¶

Bases: SCPICmdWrite

The DISplay:SELect:VIEW command.

Description

This command sets or queries the selected view.

Usage

Using the .write(value) method will send the DISplay:SELect:VIEW value command.

SCPI Syntax

- DISplay:SELect:VIEW {WAVEVIEW1|MATHFFT<x>|PLOTVIEW<x>|REFFFT<x>}

Info

WAVEVIEW1 sets WAVEVIEW as the selected view.
MATHFFT<x> sets MATHFFT as the selected view.
PLOTVIEW<x> sets PLOTVIEW as the selected view.
REFFFT<x> sets REFFFT as the selected view.

DisplaySelectWaveview1 ¶

Bases: SCPICmdRead

The DISplay:SELect:WAVEView1 command tree.

Usage

Using the .query() method will send the DISplay:SELect:WAVEView1? query.
Using the .verify(value) method will send the DISplay:SELect:WAVEView1? query and raise an AssertionError if the returned value does not match value.

Properties

.source: The DISplay:SELect:WAVEView1:SOUrce command.

source `property` ¶

source: DisplaySelectWaveview1Source

Return the DISplay:SELect:WAVEView1:SOUrce command.

Description

This command sets or queries the selected source in the given waveview.

Usage

Using the .write(value) method will send the DISplay:SELect:WAVEView1:SOUrce value command.

SCPI Syntax

- DISplay:SELect:WAVEView1:SOUrce {CH<x>|MATH<x>|BUS<x>|REF<x>|PLOT<x>}

Info

CH<x> specifies an analog channel as source.
MATH<x> specifies a math channel as source.
BUS<x> specifies a bus as source.
REF<x> specifies a reference waveform as the source.
PLOT<x> specifies a plot as the source.

DisplaySelectWaveview1Source ¶

Bases: SCPICmdWrite

The DISplay:SELect:WAVEView1:SOUrce command.

Description

This command sets or queries the selected source in the given waveview.

Usage

Using the .write(value) method will send the DISplay:SELect:WAVEView1:SOUrce value command.

SCPI Syntax

- DISplay:SELect:WAVEView1:SOUrce {CH<x>|MATH<x>|BUS<x>|REF<x>|PLOT<x>}

Info

CH<x> specifies an analog channel as source.
MATH<x> specifies a math channel as source.
BUS<x> specifies a bus as source.
REF<x> specifies a reference waveform as the source.
PLOT<x> specifies a plot as the source.

DisplaySpecview1 ¶

Bases: SCPICmdRead

The DISplay:SPECView1 command tree.

Usage

Using the .query() method will send the DISplay:SPECView1? query.
Using the .verify(value) method will send the DISplay:SPECView1? query and raise an AssertionError if the returned value does not match value.

Properties

.ch: The DISplay:SPECView1:CH<x> command tree.
.cursor: The DISplay:SPECView1:CURSor command tree.
.graticule: The DISplay:SPECView1:GRAticule command.
.horz: The DISplay:SPECView1:HORZ command.
.intensity: The DISplay:SPECView1:INTENSITy command tree.
.viewstyle: The DISplay:SPECView1:VIEWStyle command.

ch `property` ¶

ch: dict[int, DisplaySpecview1Channel]

Return the DISplay:SPECView1:CH<x> command tree.

Usage

Using the .query() method will send the DISplay:SPECView1:CH<x>? query.
Using the .verify(value) method will send the DISplay:SPECView1:CH<x>? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.vertical: The DISplay:SPECView1:CH<x>:VERTical command tree.

cursor `property` ¶

cursor: DisplaySpecview1Cursor

Return the DISplay:SPECView1:CURSor command tree.

Usage

Using the .query() method will send the DISplay:SPECView1:CURSor? query.
Using the .verify(value) method will send the DISplay:SPECView1:CURSor? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.cursor: The DISplay:SPECView1:CURSor:CURSOR command tree.

graticule `property` ¶

graticule: DisplaySpecview1Graticule

Return the DISplay:SPECView1:GRAticule command.

Description

This command sets or queries the type of graticule shown in the Spectrum View window. The same grid is used for all spectrum traces.

Usage

Using the .query() method will send the DISplay:SPECView1:GRAticule? query.
Using the .verify(value) method will send the DISplay:SPECView1:GRAticule? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:SPECView1:GRAticule value command.

SCPI Syntax

- DISplay:SPECView1:GRAticule {GRId|TIMe|FULl|NONe}
- DISplay:SPECView1:GRAticule?

Info

1 specifies the Spectrum View number. is always 1.
GRId specifies to show the Grid graticule (frame and grid) in the Spectrum View window.
TIMe specifies to show the Time graticule in the Spectrum View window.
FULl specifies to show the Full graticule (frame, a grid and cross hairs) in the Spectrum View window.
NONe specifies to show no graticule in the Spectrum View window.

horz `property` ¶

horz: DisplaySpecview1Horz

Return the DISplay:SPECView1:HORZ command.

Description

This command sets or queries the horizontal display scaling of the Spectrum View window.

Usage

Using the .query() method will send the DISplay:SPECView1:HORZ? query.
Using the .verify(value) method will send the DISplay:SPECView1:HORZ? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:SPECView1:HORZ value command.

SCPI Syntax

- DISplay:SPECView1:HORZ {LOG|LINEAr}
- DISplay:SPECView1:HORZ?

Info

1 specifies the Spectrum View number. is always 1.
LINEAr sets the Spectrum View horizontal scaling to linear.
LOG sets the Spectrum View horizontal scaling to log.

intensity `property` ¶

intensity: DisplaySpecview1Intensity

Return the DISplay:SPECView1:INTENSITy command tree.

Usage

Using the .query() method will send the DISplay:SPECView1:INTENSITy? query.
Using the .verify(value) method will send the DISplay:SPECView1:INTENSITy? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.graticule: The DISplay:SPECView1:INTENSITy:GRATicule command.
.waveform: The DISplay:SPECView1:INTENSITy:WAVEform command.

viewstyle `property` ¶

viewstyle: DisplaySpecview1Viewstyle

Return the DISplay:SPECView1:VIEWStyle command.

Description

This command sets or queries the spectrum trace layout style used by the Spectrum View window.

Usage

Using the .query() method will send the DISplay:SPECView1:VIEWStyle? query.
Using the .verify(value) method will send the DISplay:SPECView1:VIEWStyle? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:SPECView1:VIEWStyle value command.

SCPI Syntax

- DISplay:SPECView1:VIEWStyle {OVErlay|STAcked}
- DISplay:SPECView1:VIEWStyle?

Info

1 specifies the Spectrum View number. is always 1.
OVErlay specifies the Spectrum View window to show all spectrum traces drawn on top of each other.
STAcked specifies the Spectrum View window to show each spectrum trace in a separate horizontal slice.

DisplaySpecview1Channel ¶

Bases: ValidatedChannel, SCPICmdRead

The DISplay:SPECView1:CH<x> command tree.

Usage

Using the .query() method will send the DISplay:SPECView1:CH<x>? query.
Using the .verify(value) method will send the DISplay:SPECView1:CH<x>? query and raise an AssertionError if the returned value does not match value.

Properties

.vertical: The DISplay:SPECView1:CH<x>:VERTical command tree.

vertical `property` ¶

vertical: DisplaySpecview1ChannelVertical

Return the DISplay:SPECView1:CH<x>:VERTical command tree.

Usage

Using the .query() method will send the DISplay:SPECView1:CH<x>:VERTical? query.
Using the .verify(value) method will send the DISplay:SPECView1:CH<x>:VERTical? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.position: The DISplay:SPECView1:CH<x>:VERTical:POSition command.
.scale: The DISplay:SPECView1:CH<x>:VERTical:SCAle command.

DisplaySpecview1ChannelVertical ¶

Bases: SCPICmdRead

The DISplay:SPECView1:CH<x>:VERTical command tree.

Usage

Using the .query() method will send the DISplay:SPECView1:CH<x>:VERTical? query.
Using the .verify(value) method will send the DISplay:SPECView1:CH<x>:VERTical? query and raise an AssertionError if the returned value does not match value.

Properties

.position: The DISplay:SPECView1:CH<x>:VERTical:POSition command.
.scale: The DISplay:SPECView1:CH<x>:VERTical:SCAle command.

position `property` ¶

position: DisplaySpecview1ChannelVerticalPosition

Return the DISplay:SPECView1:CH<x>:VERTical:POSition command.

Description

Sets or queries the vertical position of the specified channel in the specified Spectrum View in divisions.

Usage

Using the .query() method will send the DISplay:SPECView1:CH<x>:VERTical:POSition? query.
Using the .verify(value) method will send the DISplay:SPECView1:CH<x>:VERTical:POSition? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:SPECView1:CH<x>:VERTical:POSition value command.

SCPI Syntax

- DISplay:SPECView1:CH<x>:VERTical:POSition <NR3>
- DISplay:SPECView1:CH<x>:VERTical:POSition?

Info

<NR3> is the vertical position in divisions.

scale `property` ¶

scale: DisplaySpecview1ChannelVerticalScale

Return the DISplay:SPECView1:CH<x>:VERTical:SCAle command.

Description

Sets or queries the vertical scale of the specified channel in the specified Spectrum View.

Usage

Using the .query() method will send the DISplay:SPECView1:CH<x>:VERTical:SCAle? query.
Using the .verify(value) method will send the DISplay:SPECView1:CH<x>:VERTical:SCAle? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:SPECView1:CH<x>:VERTical:SCAle value command.

SCPI Syntax

- DISplay:SPECView1:CH<x>:VERTical:SCAle <NR3>
- DISplay:SPECView1:CH<x>:VERTical:SCAle?

Info

<NR3> is the vertical scale of the specified channel.

DisplaySpecview1ChannelVerticalPosition ¶

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:SPECView1:CH<x>:VERTical:POSition command.

Description

Sets or queries the vertical position of the specified channel in the specified Spectrum View in divisions.

Usage

Using the .query() method will send the DISplay:SPECView1:CH<x>:VERTical:POSition? query.
Using the .verify(value) method will send the DISplay:SPECView1:CH<x>:VERTical:POSition? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:SPECView1:CH<x>:VERTical:POSition value command.

SCPI Syntax

- DISplay:SPECView1:CH<x>:VERTical:POSition <NR3>
- DISplay:SPECView1:CH<x>:VERTical:POSition?

Info

<NR3> is the vertical position in divisions.

DisplaySpecview1ChannelVerticalScale ¶

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:SPECView1:CH<x>:VERTical:SCAle command.

Description

Sets or queries the vertical scale of the specified channel in the specified Spectrum View.

Usage

Using the .query() method will send the DISplay:SPECView1:CH<x>:VERTical:SCAle? query.
Using the .verify(value) method will send the DISplay:SPECView1:CH<x>:VERTical:SCAle? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:SPECView1:CH<x>:VERTical:SCAle value command.

SCPI Syntax

- DISplay:SPECView1:CH<x>:VERTical:SCAle <NR3>
- DISplay:SPECView1:CH<x>:VERTical:SCAle?

Info

<NR3> is the vertical scale of the specified channel.

DisplaySpecview1Cursor ¶

Bases: SCPICmdRead

The DISplay:SPECView1:CURSor command tree.

Usage

Using the .query() method will send the DISplay:SPECView1:CURSor? query.
Using the .verify(value) method will send the DISplay:SPECView1:CURSor? query and raise an AssertionError if the returned value does not match value.

Properties

.cursor: The DISplay:SPECView1:CURSor:CURSOR command tree.

cursor `property` ¶

cursor: DisplaySpecview1CursorCursor

Return the DISplay:SPECView1:CURSor:CURSOR command tree.

Usage

Using the .query() method will send the DISplay:SPECView1:CURSor:CURSOR? query.
Using the .verify(value) method will send the DISplay:SPECView1:CURSor:CURSOR? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.anoisedensity: The DISplay:SPECView1:CURSor:CURSOR:ANOISEDensity command.
.asource: The DISplay:SPECView1:CURSor:CURSOR:ASOUrce command.
.bnoise: The DISplay:SPECView1:CURSor:CURSOR:BNOISE command.
.bsource: The DISplay:SPECView1:CURSor:CURSOR:BSOUrce command.
.hbars: The DISplay:SPECView1:CURSor:CURSOR:HBArs command tree.
.readout: The DISplay:SPECView1:CURSor:CURSOR:READout command.
.splitmode: The DISplay:SPECView1:CURSor:CURSOR:SPLITMODE command.
.state: The DISplay:SPECView1:CURSor:CURSOR:STATE command.
.vbars: The DISplay:SPECView1:CURSor:CURSOR:VBArs command tree.
.waveform: The DISplay:SPECView1:CURSor:CURSOR:WAVEform command tree.

DisplaySpecview1CursorCursor ¶

Bases: SCPICmdRead

The DISplay:SPECView1:CURSor:CURSOR command tree.

Usage

Using the .query() method will send the DISplay:SPECView1:CURSor:CURSOR? query.
Using the .verify(value) method will send the DISplay:SPECView1:CURSor:CURSOR? query and raise an AssertionError if the returned value does not match value.

Properties

.anoisedensity: The DISplay:SPECView1:CURSor:CURSOR:ANOISEDensity command.
.asource: The DISplay:SPECView1:CURSor:CURSOR:ASOUrce command.
.bnoise: The DISplay:SPECView1:CURSor:CURSOR:BNOISE command.
.bsource: The DISplay:SPECView1:CURSor:CURSOR:BSOUrce command.
.hbars: The DISplay:SPECView1:CURSor:CURSOR:HBArs command tree.
.readout: The DISplay:SPECView1:CURSor:CURSOR:READout command.
.splitmode: The DISplay:SPECView1:CURSor:CURSOR:SPLITMODE command.
.state: The DISplay:SPECView1:CURSor:CURSOR:STATE command.
.vbars: The DISplay:SPECView1:CURSor:CURSOR:VBArs command tree.
.waveform: The DISplay:SPECView1:CURSor:CURSOR:WAVEform command tree.

anoisedensity `property` ¶

anoisedensity: DisplaySpecview1CursorCursorAnoisedensity

Return the DISplay:SPECView1:CURSor:CURSOR:ANOISEDensity command.

Description

Returns the noise density of the selected RF trace at the Cursor A position

Usage

Using the .query() method will send the DISplay:SPECView1:CURSor:CURSOR:ANOISEDensity? query.
Using the .verify(value) method will send the DISplay:SPECView1:CURSor:CURSOR:ANOISEDensity? query and raise an AssertionError if the returned value does not match value.

SCPI Syntax

- DISplay:SPECView1:CURSor:CURSOR:ANOISEDensity?

Info

1 is the specified Spectrum View and must be SPECView1.

asource `property` ¶

asource: DisplaySpecview1CursorCursorAsource

Return the DISplay:SPECView1:CURSor:CURSOR:ASOUrce command.

Description

This command sets or queries the Cursor A source in the Spectrum View.

Usage

Using the .query() method will send the DISplay:SPECView1:CURSor:CURSOR:ASOUrce? query.
Using the .verify(value) method will send the DISplay:SPECView1:CURSor:CURSOR:ASOUrce? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:SPECView1:CURSor:CURSOR:ASOUrce value command.

SCPI Syntax

- DISplay:SPECView1:CURSor:CURSOR:ASOUrce {AUTO|CH<x>}
- DISplay:SPECView1:CURSor:CURSOR:ASOUrce?

Info

1 specifies the Spectrum View number. is always 1.
AUTO specifies to use the selected analog channel as the Spectrum View source.
CH<x> specifies the analog channel to use as the Spectrum View source.

bnoise `property` ¶

bnoise: DisplaySpecview1CursorCursorBnoise

Return the DISplay:SPECView1:CURSor:CURSOR:BNOISE command.

Description

Returns the noise density of the selected RF trace at the Cursor B position when in Absolute mode, or the phase noise when in Delta mode.

Usage

Using the .query() method will send the DISplay:SPECView1:CURSor:CURSOR:BNOISE? query.
Using the .verify(value) method will send the DISplay:SPECView1:CURSor:CURSOR:BNOISE? query and raise an AssertionError if the returned value does not match value.

SCPI Syntax

- DISplay:SPECView1:CURSor:CURSOR:BNOISE?

Info

1 is the specified Spectrum View and must be SPECView1.

bsource `property` ¶

bsource: DisplaySpecview1CursorCursorBsource

Return the DISplay:SPECView1:CURSor:CURSOR:BSOUrce command.

Description

This command sets or queries the Cursor B source in the Spectrum View.

Usage

Using the .query() method will send the DISplay:SPECView1:CURSor:CURSOR:BSOUrce? query.
Using the .verify(value) method will send the DISplay:SPECView1:CURSor:CURSOR:BSOUrce? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:SPECView1:CURSor:CURSOR:BSOUrce value command.

SCPI Syntax

- DISplay:SPECView1:CURSor:CURSOR:BSOUrce {AUTO|CH<x>}
- DISplay:SPECView1:CURSor:CURSOR:BSOUrce?

Info

1 specifies the Spectrum View number. is always 1.
AUTO specifies to use the selected analog channel as the Spectrum View source.
CH<x> specifies the analog channel to use as the Spectrum View source.

hbars `property` ¶

hbars: DisplaySpecview1CursorCursorHbars

Return the DISplay:SPECView1:CURSor:CURSOR:HBArs command tree.

Usage

Using the .query() method will send the DISplay:SPECView1:CURSor:CURSOR:HBArs? query.
Using the .verify(value) method will send the DISplay:SPECView1:CURSor:CURSOR:HBArs? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.aposition: The DISplay:SPECView1:CURSor:CURSOR:HBArs:APOSition command.
.aunits: The DISplay:SPECView1:CURSor:CURSOR:HBArs:AUNIts command.
.bposition: The DISplay:SPECView1:CURSor:CURSOR:HBArs:BPOSition command.
.bunits: The DISplay:SPECView1:CURSor:CURSOR:HBArs:BUNIts command.

readout `property` ¶

readout: DisplaySpecview1CursorCursorReadout

Return the DISplay:SPECView1:CURSor:CURSOR:READout command.

Description

This command sets or queries the Cursor B readout type in the Spectrum View.

Usage

Using the .query() method will send the DISplay:SPECView1:CURSor:CURSOR:READout? query.
Using the .verify(value) method will send the DISplay:SPECView1:CURSor:CURSOR:READout? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:SPECView1:CURSor:CURSOR:READout value command.

SCPI Syntax

- DISplay:SPECView1:CURSor:CURSOR:READout {ABSOLUTE|DELTA}
- DISplay:SPECView1:CURSor:CURSOR:READout?

Info

1 specifies the Spectrum View number. is always 1.
ABSOLUTE specifies the Cursor B readout displays absolute frequency and amplitude.
DELTA specifies the Cursor B readout displays delta frequency and amplitude from Cursor A.

splitmode `property` ¶

splitmode: DisplaySpecview1CursorCursorSplitmode

Return the DISplay:SPECView1:CURSor:CURSOR:SPLITMODE command.

Description

This command sets or queries whether both Spectrum View cursors have the same or different sources.

Usage

Using the .query() method will send the DISplay:SPECView1:CURSor:CURSOR:SPLITMODE? query.
Using the .verify(value) method will send the DISplay:SPECView1:CURSor:CURSOR:SPLITMODE? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:SPECView1:CURSor:CURSOR:SPLITMODE value command.

SCPI Syntax

- DISplay:SPECView1:CURSor:CURSOR:SPLITMODE {SAME|SPLIT}
- DISplay:SPECView1:CURSor:CURSOR:SPLITMODE?

Info

1 specifies the Spectrum View number. is always 1.
SAME specifies that both Spectrum View cursors have the same source.
SPLIT specifies that both Spectrum View cursors have independent sources.

state `property` ¶

state: DisplaySpecview1CursorCursorState

Return the DISplay:SPECView1:CURSor:CURSOR:STATE command.

Description

This command sets or queries the visibility state of the cursors in the Spectrum View.

Usage

Using the .query() method will send the DISplay:SPECView1:CURSor:CURSOR:STATE? query.
Using the .verify(value) method will send the DISplay:SPECView1:CURSor:CURSOR:STATE? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:SPECView1:CURSor:CURSOR:STATE value command.

SCPI Syntax

- DISplay:SPECView1:CURSor:CURSOR:STATE {ON|OFF}
- DISplay:SPECView1:CURSor:CURSOR:STATE?

Info

1 specifies the Spectrum View number. is always 1.
ON enables viewing cursors in the Spectrum View.
OFF disables viewing cursors in the Spectrum View.

vbars `property` ¶

vbars: DisplaySpecview1CursorCursorVbars

Return the DISplay:SPECView1:CURSor:CURSOR:VBArs command tree.

Usage

Using the .query() method will send the DISplay:SPECView1:CURSor:CURSOR:VBArs? query.
Using the .verify(value) method will send the DISplay:SPECView1:CURSor:CURSOR:VBArs? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.aposition: The DISplay:SPECView1:CURSor:CURSOR:VBArs:APOSition command.
.bposition: The DISplay:SPECView1:CURSor:CURSOR:VBArs:BPOSition command.
.units: The DISplay:SPECView1:CURSor:CURSOR:VBArs:UNIts command.

waveform `property` ¶

waveform: DisplaySpecview1CursorCursorWaveform

Return the DISplay:SPECView1:CURSor:CURSOR:WAVEform command tree.

Usage

Using the .query() method will send the DISplay:SPECView1:CURSor:CURSOR:WAVEform? query.
Using the .verify(value) method will send the DISplay:SPECView1:CURSor:CURSOR:WAVEform? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.aposition: The DISplay:SPECView1:CURSor:CURSOR:WAVEform:APOSition command.
.bposition: The DISplay:SPECView1:CURSor:CURSOR:WAVEform:BPOSition command.

DisplaySpecview1CursorCursorAnoisedensity ¶

Bases: SCPICmdRead

The DISplay:SPECView1:CURSor:CURSOR:ANOISEDensity command.

Description

Returns the noise density of the selected RF trace at the Cursor A position

Usage

Using the .query() method will send the DISplay:SPECView1:CURSor:CURSOR:ANOISEDensity? query.
Using the .verify(value) method will send the DISplay:SPECView1:CURSor:CURSOR:ANOISEDensity? query and raise an AssertionError if the returned value does not match value.

SCPI Syntax

- DISplay:SPECView1:CURSor:CURSOR:ANOISEDensity?

Info

1 is the specified Spectrum View and must be SPECView1.

DisplaySpecview1CursorCursorAsource ¶

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:SPECView1:CURSor:CURSOR:ASOUrce command.

Description

This command sets or queries the Cursor A source in the Spectrum View.

Usage

Using the .query() method will send the DISplay:SPECView1:CURSor:CURSOR:ASOUrce? query.
Using the .verify(value) method will send the DISplay:SPECView1:CURSor:CURSOR:ASOUrce? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:SPECView1:CURSor:CURSOR:ASOUrce value command.

SCPI Syntax

- DISplay:SPECView1:CURSor:CURSOR:ASOUrce {AUTO|CH<x>}
- DISplay:SPECView1:CURSor:CURSOR:ASOUrce?

Info

1 specifies the Spectrum View number. is always 1.
AUTO specifies to use the selected analog channel as the Spectrum View source.
CH<x> specifies the analog channel to use as the Spectrum View source.

DisplaySpecview1CursorCursorBnoise ¶

Bases: SCPICmdRead

The DISplay:SPECView1:CURSor:CURSOR:BNOISE command.

Description

Returns the noise density of the selected RF trace at the Cursor B position when in Absolute mode, or the phase noise when in Delta mode.

Usage

Using the .query() method will send the DISplay:SPECView1:CURSor:CURSOR:BNOISE? query.
Using the .verify(value) method will send the DISplay:SPECView1:CURSor:CURSOR:BNOISE? query and raise an AssertionError if the returned value does not match value.

SCPI Syntax

- DISplay:SPECView1:CURSor:CURSOR:BNOISE?

Info

1 is the specified Spectrum View and must be SPECView1.

DisplaySpecview1CursorCursorBsource ¶

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:SPECView1:CURSor:CURSOR:BSOUrce command.

Description

This command sets or queries the Cursor B source in the Spectrum View.

Usage

Using the .query() method will send the DISplay:SPECView1:CURSor:CURSOR:BSOUrce? query.
Using the .verify(value) method will send the DISplay:SPECView1:CURSor:CURSOR:BSOUrce? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:SPECView1:CURSor:CURSOR:BSOUrce value command.

SCPI Syntax

- DISplay:SPECView1:CURSor:CURSOR:BSOUrce {AUTO|CH<x>}
- DISplay:SPECView1:CURSor:CURSOR:BSOUrce?

Info

1 specifies the Spectrum View number. is always 1.
AUTO specifies to use the selected analog channel as the Spectrum View source.
CH<x> specifies the analog channel to use as the Spectrum View source.

DisplaySpecview1CursorCursorHbars ¶

Bases: SCPICmdRead

The DISplay:SPECView1:CURSor:CURSOR:HBArs command tree.

Usage

Using the .query() method will send the DISplay:SPECView1:CURSor:CURSOR:HBArs? query.
Using the .verify(value) method will send the DISplay:SPECView1:CURSor:CURSOR:HBArs? query and raise an AssertionError if the returned value does not match value.

Properties

.aposition: The DISplay:SPECView1:CURSor:CURSOR:HBArs:APOSition command.
.aunits: The DISplay:SPECView1:CURSor:CURSOR:HBArs:AUNIts command.
.bposition: The DISplay:SPECView1:CURSor:CURSOR:HBArs:BPOSition command.
.bunits: The DISplay:SPECView1:CURSor:CURSOR:HBArs:BUNIts command.

aposition `property` ¶

aposition: DisplaySpecview1CursorCursorHbarsAposition

Return the DISplay:SPECView1:CURSor:CURSOR:HBArs:APOSition command.

Description

This command queries the Cursor A horizontal bar’s vertical position (where it crosses the spectrum signal) in the Spectrum View.

Usage

Using the .query() method will send the DISplay:SPECView1:CURSor:CURSOR:HBArs:APOSition? query.
Using the .verify(value) method will send the DISplay:SPECView1:CURSor:CURSOR:HBArs:APOSition? query and raise an AssertionError if the returned value does not match value.

SCPI Syntax

- DISplay:SPECView1:CURSor:CURSOR:HBArs:APOSition?

Info

1 specifies the Spectrum View number. is always 1.

aunits `property` ¶

aunits: DisplaySpecview1CursorCursorHbarsAunits

Return the DISplay:SPECView1:CURSor:CURSOR:HBArs:AUNIts command.

Description

This command queries the horizontal bar Cursor A horizontal bar’s amplitude units in the Spectrum View.

Usage

Using the .query() method will send the DISplay:SPECView1:CURSor:CURSOR:HBArs:AUNIts? query.
Using the .verify(value) method will send the DISplay:SPECView1:CURSor:CURSOR:HBArs:AUNIts? query and raise an AssertionError if the returned value does not match value.

SCPI Syntax

- DISplay:SPECView1:CURSor:CURSOR:HBArs:AUNIts?

Info

1 specifies the Spectrum View number. is always 1.

bposition `property` ¶

bposition: DisplaySpecview1CursorCursorHbarsBposition

Return the DISplay:SPECView1:CURSor:CURSOR:HBArs:BPOSition command.

Description

This command queries the horizontal bar Cursor B horizontal bar’s vertical position (where it crosses the spectrum signal) in the Spectrum View.

Usage

Using the .query() method will send the DISplay:SPECView1:CURSor:CURSOR:HBArs:BPOSition? query.
Using the .verify(value) method will send the DISplay:SPECView1:CURSor:CURSOR:HBArs:BPOSition? query and raise an AssertionError if the returned value does not match value.

SCPI Syntax

- DISplay:SPECView1:CURSor:CURSOR:HBArs:BPOSition?

Info

1 specifies the Spectrum View number. is always 1.

bunits `property` ¶

bunits: DisplaySpecview1CursorCursorHbarsBunits

Return the DISplay:SPECView1:CURSor:CURSOR:HBArs:BUNIts command.

Description

This command queries the Cursor B horizontal bar’s amplitude units in the Spectrum View.

Usage

Using the .query() method will send the DISplay:SPECView1:CURSor:CURSOR:HBArs:BUNIts? query.
Using the .verify(value) method will send the DISplay:SPECView1:CURSor:CURSOR:HBArs:BUNIts? query and raise an AssertionError if the returned value does not match value.

SCPI Syntax

- DISplay:SPECView1:CURSor:CURSOR:HBArs:BUNIts?

Info

1 specifies the Spectrum View number. is always 1.

DisplaySpecview1CursorCursorHbarsAposition ¶

Bases: SCPICmdRead

The DISplay:SPECView1:CURSor:CURSOR:HBArs:APOSition command.

Description

This command queries the Cursor A horizontal bar’s vertical position (where it crosses the spectrum signal) in the Spectrum View.

Usage

Using the .query() method will send the DISplay:SPECView1:CURSor:CURSOR:HBArs:APOSition? query.
Using the .verify(value) method will send the DISplay:SPECView1:CURSor:CURSOR:HBArs:APOSition? query and raise an AssertionError if the returned value does not match value.

SCPI Syntax

- DISplay:SPECView1:CURSor:CURSOR:HBArs:APOSition?

Info

1 specifies the Spectrum View number. is always 1.

DisplaySpecview1CursorCursorHbarsAunits ¶

Bases: SCPICmdRead

The DISplay:SPECView1:CURSor:CURSOR:HBArs:AUNIts command.

Description

This command queries the horizontal bar Cursor A horizontal bar’s amplitude units in the Spectrum View.

Usage

Using the .query() method will send the DISplay:SPECView1:CURSor:CURSOR:HBArs:AUNIts? query.
Using the .verify(value) method will send the DISplay:SPECView1:CURSor:CURSOR:HBArs:AUNIts? query and raise an AssertionError if the returned value does not match value.

SCPI Syntax

- DISplay:SPECView1:CURSor:CURSOR:HBArs:AUNIts?

Info

1 specifies the Spectrum View number. is always 1.

DisplaySpecview1CursorCursorHbarsBposition ¶

Bases: SCPICmdRead

The DISplay:SPECView1:CURSor:CURSOR:HBArs:BPOSition command.

Description

This command queries the horizontal bar Cursor B horizontal bar’s vertical position (where it crosses the spectrum signal) in the Spectrum View.

Usage

Using the .query() method will send the DISplay:SPECView1:CURSor:CURSOR:HBArs:BPOSition? query.
Using the .verify(value) method will send the DISplay:SPECView1:CURSor:CURSOR:HBArs:BPOSition? query and raise an AssertionError if the returned value does not match value.

SCPI Syntax

- DISplay:SPECView1:CURSor:CURSOR:HBArs:BPOSition?

Info

1 specifies the Spectrum View number. is always 1.

DisplaySpecview1CursorCursorHbarsBunits ¶

Bases: SCPICmdRead

The DISplay:SPECView1:CURSor:CURSOR:HBArs:BUNIts command.

Description

This command queries the Cursor B horizontal bar’s amplitude units in the Spectrum View.

Usage

Using the .query() method will send the DISplay:SPECView1:CURSor:CURSOR:HBArs:BUNIts? query.
Using the .verify(value) method will send the DISplay:SPECView1:CURSor:CURSOR:HBArs:BUNIts? query and raise an AssertionError if the returned value does not match value.

SCPI Syntax

- DISplay:SPECView1:CURSor:CURSOR:HBArs:BUNIts?

Info

1 specifies the Spectrum View number. is always 1.

DisplaySpecview1CursorCursorReadout ¶

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:SPECView1:CURSor:CURSOR:READout command.

Description

This command sets or queries the Cursor B readout type in the Spectrum View.

Usage

Using the .query() method will send the DISplay:SPECView1:CURSor:CURSOR:READout? query.
Using the .verify(value) method will send the DISplay:SPECView1:CURSor:CURSOR:READout? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:SPECView1:CURSor:CURSOR:READout value command.

SCPI Syntax

- DISplay:SPECView1:CURSor:CURSOR:READout {ABSOLUTE|DELTA}
- DISplay:SPECView1:CURSor:CURSOR:READout?

Info

1 specifies the Spectrum View number. is always 1.
ABSOLUTE specifies the Cursor B readout displays absolute frequency and amplitude.
DELTA specifies the Cursor B readout displays delta frequency and amplitude from Cursor A.

DisplaySpecview1CursorCursorSplitmode ¶

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:SPECView1:CURSor:CURSOR:SPLITMODE command.

Description

This command sets or queries whether both Spectrum View cursors have the same or different sources.

Usage

Using the .query() method will send the DISplay:SPECView1:CURSor:CURSOR:SPLITMODE? query.
Using the .verify(value) method will send the DISplay:SPECView1:CURSor:CURSOR:SPLITMODE? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:SPECView1:CURSor:CURSOR:SPLITMODE value command.

SCPI Syntax

- DISplay:SPECView1:CURSor:CURSOR:SPLITMODE {SAME|SPLIT}
- DISplay:SPECView1:CURSor:CURSOR:SPLITMODE?

Info

1 specifies the Spectrum View number. is always 1.
SAME specifies that both Spectrum View cursors have the same source.
SPLIT specifies that both Spectrum View cursors have independent sources.

DisplaySpecview1CursorCursorState ¶

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:SPECView1:CURSor:CURSOR:STATE command.

Description

This command sets or queries the visibility state of the cursors in the Spectrum View.

Usage

Using the .query() method will send the DISplay:SPECView1:CURSor:CURSOR:STATE? query.
Using the .verify(value) method will send the DISplay:SPECView1:CURSor:CURSOR:STATE? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:SPECView1:CURSor:CURSOR:STATE value command.

SCPI Syntax

- DISplay:SPECView1:CURSor:CURSOR:STATE {ON|OFF}
- DISplay:SPECView1:CURSor:CURSOR:STATE?

Info

1 specifies the Spectrum View number. is always 1.
ON enables viewing cursors in the Spectrum View.
OFF disables viewing cursors in the Spectrum View.

DisplaySpecview1CursorCursorVbars ¶

Bases: SCPICmdRead

The DISplay:SPECView1:CURSor:CURSOR:VBArs command tree.

Usage

Using the .query() method will send the DISplay:SPECView1:CURSor:CURSOR:VBArs? query.
Using the .verify(value) method will send the DISplay:SPECView1:CURSor:CURSOR:VBArs? query and raise an AssertionError if the returned value does not match value.

Properties

.aposition: The DISplay:SPECView1:CURSor:CURSOR:VBArs:APOSition command.
.bposition: The DISplay:SPECView1:CURSor:CURSOR:VBArs:BPOSition command.
.units: The DISplay:SPECView1:CURSor:CURSOR:VBArs:UNIts command.

aposition `property` ¶

aposition: DisplaySpecview1CursorCursorVbarsAposition

Return the DISplay:SPECView1:CURSor:CURSOR:VBArs:APOSition command.

Description

This command sets or queries the Cursor A vertical bar’s horizontal position in the Spectrum View.

Usage

Using the .query() method will send the DISplay:SPECView1:CURSor:CURSOR:VBArs:APOSition? query.
Using the .verify(value) method will send the DISplay:SPECView1:CURSor:CURSOR:VBArs:APOSition? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:SPECView1:CURSor:CURSOR:VBArs:APOSition value command.

SCPI Syntax

- DISplay:SPECView1:CURSor:CURSOR:VBArs:APOSition <NR3>
- DISplay:SPECView1:CURSor:CURSOR:VBArs:APOSition?

Info

1 specifies the Spectrum View number. is always 1.
<NR3> specifies the horizontal position of Cursor A in Hz. The available frequency range is set by the frequencies at the left and right edges of the Spectrum View for the cursor source.

bposition `property` ¶

bposition: DisplaySpecview1CursorCursorVbarsBposition

Return the DISplay:SPECView1:CURSor:CURSOR:VBArs:BPOSition command.

Description

This command sets or queries the Cursor B vertical bar’s horizontal position in the Spectrum View.

Usage

Using the .query() method will send the DISplay:SPECView1:CURSor:CURSOR:VBArs:BPOSition? query.
Using the .verify(value) method will send the DISplay:SPECView1:CURSor:CURSOR:VBArs:BPOSition? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:SPECView1:CURSor:CURSOR:VBArs:BPOSition value command.

SCPI Syntax

- DISplay:SPECView1:CURSor:CURSOR:VBArs:BPOSition <NR3>
- DISplay:SPECView1:CURSor:CURSOR:VBArs:BPOSition?

Info

1 specifies the Spectrum View number. is always 1.
<NR3> specifies the horizontal position of Cursor B in Hz. The available frequency range is set by the frequencies at the left and right edges of the Spectrum View for the cursor source.

units `property` ¶

units: DisplaySpecview1CursorCursorVbarsUnits

Return the DISplay:SPECView1:CURSor:CURSOR:VBArs:UNIts command.

Description

This command queries the cursor horizontal units in the Spectrum View.

Usage

Using the .query() method will send the DISplay:SPECView1:CURSor:CURSOR:VBArs:UNIts? query.
Using the .verify(value) method will send the DISplay:SPECView1:CURSor:CURSOR:VBArs:UNIts? query and raise an AssertionError if the returned value does not match value.

SCPI Syntax

- DISplay:SPECView1:CURSor:CURSOR:VBArs:UNIts?

Info

1 specifies the Spectrum View number. is always 1.

DisplaySpecview1CursorCursorVbarsAposition ¶

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:SPECView1:CURSor:CURSOR:VBArs:APOSition command.

Description

This command sets or queries the Cursor A vertical bar’s horizontal position in the Spectrum View.

Usage

Using the .query() method will send the DISplay:SPECView1:CURSor:CURSOR:VBArs:APOSition? query.
Using the .verify(value) method will send the DISplay:SPECView1:CURSor:CURSOR:VBArs:APOSition? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:SPECView1:CURSor:CURSOR:VBArs:APOSition value command.

SCPI Syntax

- DISplay:SPECView1:CURSor:CURSOR:VBArs:APOSition <NR3>
- DISplay:SPECView1:CURSor:CURSOR:VBArs:APOSition?

Info

1 specifies the Spectrum View number. is always 1.
<NR3> specifies the horizontal position of Cursor A in Hz. The available frequency range is set by the frequencies at the left and right edges of the Spectrum View for the cursor source.

DisplaySpecview1CursorCursorVbarsBposition ¶

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:SPECView1:CURSor:CURSOR:VBArs:BPOSition command.

Description

This command sets or queries the Cursor B vertical bar’s horizontal position in the Spectrum View.

Usage

Using the .query() method will send the DISplay:SPECView1:CURSor:CURSOR:VBArs:BPOSition? query.
Using the .verify(value) method will send the DISplay:SPECView1:CURSor:CURSOR:VBArs:BPOSition? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:SPECView1:CURSor:CURSOR:VBArs:BPOSition value command.

SCPI Syntax

- DISplay:SPECView1:CURSor:CURSOR:VBArs:BPOSition <NR3>
- DISplay:SPECView1:CURSor:CURSOR:VBArs:BPOSition?

Info

1 specifies the Spectrum View number. is always 1.
<NR3> specifies the horizontal position of Cursor B in Hz. The available frequency range is set by the frequencies at the left and right edges of the Spectrum View for the cursor source.

DisplaySpecview1CursorCursorVbarsUnits ¶

Bases: SCPICmdRead

The DISplay:SPECView1:CURSor:CURSOR:VBArs:UNIts command.

Description

This command queries the cursor horizontal units in the Spectrum View.

Usage

Using the .query() method will send the DISplay:SPECView1:CURSor:CURSOR:VBArs:UNIts? query.
Using the .verify(value) method will send the DISplay:SPECView1:CURSor:CURSOR:VBArs:UNIts? query and raise an AssertionError if the returned value does not match value.

SCPI Syntax

- DISplay:SPECView1:CURSor:CURSOR:VBArs:UNIts?

Info

1 specifies the Spectrum View number. is always 1.

DisplaySpecview1CursorCursorWaveform ¶

Bases: SCPICmdRead

The DISplay:SPECView1:CURSor:CURSOR:WAVEform command tree.

Usage

Using the .query() method will send the DISplay:SPECView1:CURSor:CURSOR:WAVEform? query.
Using the .verify(value) method will send the DISplay:SPECView1:CURSor:CURSOR:WAVEform? query and raise an AssertionError if the returned value does not match value.

Properties

.aposition: The DISplay:SPECView1:CURSor:CURSOR:WAVEform:APOSition command.
.bposition: The DISplay:SPECView1:CURSor:CURSOR:WAVEform:BPOSition command.

aposition `property` ¶

aposition: DisplaySpecview1CursorCursorWaveformAposition

Return the DISplay:SPECView1:CURSor:CURSOR:WAVEform:APOSition command.

Description

This command sets or queries the Cursor A horizontal position in the Spectrum View.

Usage

Using the .query() method will send the DISplay:SPECView1:CURSor:CURSOR:WAVEform:APOSition? query.
Using the .verify(value) method will send the DISplay:SPECView1:CURSor:CURSOR:WAVEform:APOSition? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:SPECView1:CURSor:CURSOR:WAVEform:APOSition value command.

SCPI Syntax

- DISplay:SPECView1:CURSor:CURSOR:WAVEform:APOSition <NR3>
- DISplay:SPECView1:CURSor:CURSOR:WAVEform:APOSition?

Info

1 specifies the Spectrum View number. is always 1.
<NR3> specifies the horizontal position of Spectrum View Cursor A in Hz. The range of values is the frequencies at the left and right edges of the Spectrum View for the cursor source.

bposition `property` ¶

bposition: DisplaySpecview1CursorCursorWaveformBposition

Return the DISplay:SPECView1:CURSor:CURSOR:WAVEform:BPOSition command.

Description

This command sets or queries the Cursor B horizontal position in the Spectrum View.

Usage

Using the .query() method will send the DISplay:SPECView1:CURSor:CURSOR:WAVEform:BPOSition? query.
Using the .verify(value) method will send the DISplay:SPECView1:CURSor:CURSOR:WAVEform:BPOSition? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:SPECView1:CURSor:CURSOR:WAVEform:BPOSition value command.

SCPI Syntax

- DISplay:SPECView1:CURSor:CURSOR:WAVEform:BPOSition <NR3>
- DISplay:SPECView1:CURSor:CURSOR:WAVEform:BPOSition?

Info

1 specifies the Spectrum View number. is always 1.
<NR3> specifies the horizontal position of Spectrum View Cursor B in Hz. The range of values is the frequencies at the left and right edges of the Spectrum View for the cursor source.

DisplaySpecview1CursorCursorWaveformAposition ¶

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:SPECView1:CURSor:CURSOR:WAVEform:APOSition command.

Description

This command sets or queries the Cursor A horizontal position in the Spectrum View.

Usage

Using the .query() method will send the DISplay:SPECView1:CURSor:CURSOR:WAVEform:APOSition? query.
Using the .verify(value) method will send the DISplay:SPECView1:CURSor:CURSOR:WAVEform:APOSition? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:SPECView1:CURSor:CURSOR:WAVEform:APOSition value command.

SCPI Syntax

- DISplay:SPECView1:CURSor:CURSOR:WAVEform:APOSition <NR3>
- DISplay:SPECView1:CURSor:CURSOR:WAVEform:APOSition?

Info

1 specifies the Spectrum View number. is always 1.
<NR3> specifies the horizontal position of Spectrum View Cursor A in Hz. The range of values is the frequencies at the left and right edges of the Spectrum View for the cursor source.

DisplaySpecview1CursorCursorWaveformBposition ¶

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:SPECView1:CURSor:CURSOR:WAVEform:BPOSition command.

Description

This command sets or queries the Cursor B horizontal position in the Spectrum View.

Usage

Using the .query() method will send the DISplay:SPECView1:CURSor:CURSOR:WAVEform:BPOSition? query.
Using the .verify(value) method will send the DISplay:SPECView1:CURSor:CURSOR:WAVEform:BPOSition? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:SPECView1:CURSor:CURSOR:WAVEform:BPOSition value command.

SCPI Syntax

- DISplay:SPECView1:CURSor:CURSOR:WAVEform:BPOSition <NR3>
- DISplay:SPECView1:CURSor:CURSOR:WAVEform:BPOSition?

Info

1 specifies the Spectrum View number. is always 1.
<NR3> specifies the horizontal position of Spectrum View Cursor B in Hz. The range of values is the frequencies at the left and right edges of the Spectrum View for the cursor source.

DisplaySpecview1Graticule ¶

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:SPECView1:GRAticule command.

Description

This command sets or queries the type of graticule shown in the Spectrum View window. The same grid is used for all spectrum traces.

Usage

Using the .query() method will send the DISplay:SPECView1:GRAticule? query.
Using the .verify(value) method will send the DISplay:SPECView1:GRAticule? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:SPECView1:GRAticule value command.

SCPI Syntax

- DISplay:SPECView1:GRAticule {GRId|TIMe|FULl|NONe}
- DISplay:SPECView1:GRAticule?

Info

1 specifies the Spectrum View number. is always 1.
GRId specifies to show the Grid graticule (frame and grid) in the Spectrum View window.
TIMe specifies to show the Time graticule in the Spectrum View window.
FULl specifies to show the Full graticule (frame, a grid and cross hairs) in the Spectrum View window.
NONe specifies to show no graticule in the Spectrum View window.

DisplaySpecview1Horz ¶

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:SPECView1:HORZ command.

Description

This command sets or queries the horizontal display scaling of the Spectrum View window.

Usage

Using the .query() method will send the DISplay:SPECView1:HORZ? query.
Using the .verify(value) method will send the DISplay:SPECView1:HORZ? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:SPECView1:HORZ value command.

SCPI Syntax

- DISplay:SPECView1:HORZ {LOG|LINEAr}
- DISplay:SPECView1:HORZ?

Info

1 specifies the Spectrum View number. is always 1.
LINEAr sets the Spectrum View horizontal scaling to linear.
LOG sets the Spectrum View horizontal scaling to log.

DisplaySpecview1Intensity ¶

Bases: SCPICmdRead

The DISplay:SPECView1:INTENSITy command tree.

Usage

Using the .query() method will send the DISplay:SPECView1:INTENSITy? query.
Using the .verify(value) method will send the DISplay:SPECView1:INTENSITy? query and raise an AssertionError if the returned value does not match value.

Properties

.graticule: The DISplay:SPECView1:INTENSITy:GRATicule command.
.waveform: The DISplay:SPECView1:INTENSITy:WAVEform command.

graticule `property` ¶

graticule: DisplaySpecview1IntensityGraticule

Return the DISplay:SPECView1:INTENSITy:GRATicule command.

Description

This command sets or queries the graticule saturation (brightness) level in the Spectrum View window. Note: This command also changes the intensity of the vertical scale values on the graticule.

Usage

Using the .query() method will send the DISplay:SPECView1:INTENSITy:GRATicule? query.
Using the .verify(value) method will send the DISplay:SPECView1:INTENSITy:GRATicule? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:SPECView1:INTENSITy:GRATicule value command.

SCPI Syntax

- DISplay:SPECView1:INTENSITy:GRATicule <NR2>
- DISplay:SPECView1:INTENSITy:GRATicule?

Info

1 specifies the Spectrum View number. is always 1.
<NR2> specifies the Spectrum View graticule intensity lever as a percent between 0% and 100%.

waveform `property` ¶

waveform: DisplaySpecview1IntensityWaveform

Return the DISplay:SPECView1:INTENSITy:WAVEform command.

Description

This command sets or queries the spectrum trace saturation (brightness) level in the Spectrum View window.

Usage

Using the .query() method will send the DISplay:SPECView1:INTENSITy:WAVEform? query.
Using the .verify(value) method will send the DISplay:SPECView1:INTENSITy:WAVEform? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:SPECView1:INTENSITy:WAVEform value command.

SCPI Syntax

- DISplay:SPECView1:INTENSITy:WAVEform <NR2>
- DISplay:SPECView1:INTENSITy:WAVEform?

Info

1 specifies the Spectrum View number. is always 1.
<NR2> specifies the spectrum trace intensity lever as a percent between 1% and 100%.

DisplaySpecview1IntensityGraticule ¶

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:SPECView1:INTENSITy:GRATicule command.

Description

This command sets or queries the graticule saturation (brightness) level in the Spectrum View window. Note: This command also changes the intensity of the vertical scale values on the graticule.

Usage

Using the .query() method will send the DISplay:SPECView1:INTENSITy:GRATicule? query.
Using the .verify(value) method will send the DISplay:SPECView1:INTENSITy:GRATicule? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:SPECView1:INTENSITy:GRATicule value command.

SCPI Syntax

- DISplay:SPECView1:INTENSITy:GRATicule <NR2>
- DISplay:SPECView1:INTENSITy:GRATicule?

Info

1 specifies the Spectrum View number. is always 1.
<NR2> specifies the Spectrum View graticule intensity lever as a percent between 0% and 100%.

DisplaySpecview1IntensityWaveform ¶

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:SPECView1:INTENSITy:WAVEform command.

Description

This command sets or queries the spectrum trace saturation (brightness) level in the Spectrum View window.

Usage

Using the .query() method will send the DISplay:SPECView1:INTENSITy:WAVEform? query.
Using the .verify(value) method will send the DISplay:SPECView1:INTENSITy:WAVEform? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:SPECView1:INTENSITy:WAVEform value command.

SCPI Syntax

- DISplay:SPECView1:INTENSITy:WAVEform <NR2>
- DISplay:SPECView1:INTENSITy:WAVEform?

Info

1 specifies the Spectrum View number. is always 1.
<NR2> specifies the spectrum trace intensity lever as a percent between 1% and 100%.

DisplaySpecview1Viewstyle ¶

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:SPECView1:VIEWStyle command.

Description

This command sets or queries the spectrum trace layout style used by the Spectrum View window.

Usage

Using the .query() method will send the DISplay:SPECView1:VIEWStyle? query.
Using the .verify(value) method will send the DISplay:SPECView1:VIEWStyle? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:SPECView1:VIEWStyle value command.

SCPI Syntax

- DISplay:SPECView1:VIEWStyle {OVErlay|STAcked}
- DISplay:SPECView1:VIEWStyle?

Info

1 specifies the Spectrum View number. is always 1.
OVErlay specifies the Spectrum View window to show all spectrum traces drawn on top of each other.
STAcked specifies the Spectrum View window to show each spectrum trace in a separate horizontal slice.

DisplayVarpersist ¶

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:VARpersist command.

Description

This command sets or queries display persistence decay time, which is the approximate decay time for a freshly struck persistence sample.

Usage

Using the .query() method will send the DISplay:VARpersist? query.
Using the .verify(value) method will send the DISplay:VARpersist? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:VARpersist value command.

SCPI Syntax

- DISplay:VARpersist <NR3>
- DISplay:VARpersist?

Info

<NR3> indicates the persistence decay time and ranges from 0.5 to 100.

DisplayWaveform ¶

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:WAVEform command.

Description

This command globally enables or disables the waveform display. When disabled, the waveform is still acquired and held in memory, but it is not drawn to the screen. Disabling the waveform display may improve processing speed.

Usage

Using the .query() method will send the DISplay:WAVEform? query.
Using the .verify(value) method will send the DISplay:WAVEform? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:WAVEform value command.

SCPI Syntax

- DISplay:WAVEform {ON|OFF|<NR1>}
- DISplay:WAVEform?

Info

<NR1> enables or disables the waveform display. 0 disables the waveform display; any other value enables the waveform display.
ON enables the waveform display.
OFF disables the waveform display.

DisplayWaveview ¶

Bases: SCPICmdRead

The DISplay:WAVEView command tree.

Usage

Using the .query() method will send the DISplay:WAVEView? query.
Using the .verify(value) method will send the DISplay:WAVEView? query and raise an AssertionError if the returned value does not match value.

Properties

.cursor: The DISplay:WAVEView:CURSor command tree.
.gridtype: The DISplay:WAVEView:GRIDTYPE command.

cursor `property` ¶

cursor: DisplayWaveviewCursor

Return the DISplay:WAVEView:CURSor command tree.

Usage

Using the .query() method will send the DISplay:WAVEView:CURSor? query.
Using the .verify(value) method will send the DISplay:WAVEView:CURSor? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.cursor1: The DISplay:WAVEView:CURSor:CURSOR1 command tree.

gridtype `property` ¶

gridtype: DisplayWaveviewGridtype

Return the DISplay:WAVEView:GRIDTYPE command.

Description

This command sets or queries the Waveform View Graticule type.

Usage

Using the .query() method will send the DISplay:WAVEView:GRIDTYPE? query.
Using the .verify(value) method will send the DISplay:WAVEView:GRIDTYPE? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:WAVEView:GRIDTYPE value command.

SCPI Syntax

- DISplay:WAVEView:GRIDTYPE {MOVEABLE|FIXED}
- DISplay:WAVEView:GRIDTYPE?

Info

MOVEABLE sets the Waveform View so that both the waveform and the grid (graticule) move together when moving the waveform horizontally.
FIXED sets the Waveform View so that the grid dows not move when moving the waveform horizontally.

DisplayWaveview1 ¶

Bases: SCPICmdRead

The DISplay:WAVEView1 command tree.

Usage

Using the .query() method will send the DISplay:WAVEView1? query.
Using the .verify(value) method will send the DISplay:WAVEView1? query and raise an AssertionError if the returned value does not match value.

Properties

.bus: The DISplay:WAVEView1:BUS command tree.
.ch: The DISplay:WAVEView1:CH<x> command tree.
.cursor: The DISplay:WAVEView1:CURSor command.
.filter: The DISplay:WAVEView1:FILTer command.
.graticule: The DISplay:WAVEView1:GRAticule command.
.intensity: The DISplay:WAVEView1:INTENSITy command tree.
.math: The DISplay:WAVEView1:MATH command tree.
.plot: The DISplay:WAVEView1:PLOT command tree.
.ref: The DISplay:WAVEView1:REF command tree.
.refx: The DISplay:WAVEView1:REF<x> command tree.
.rf_frequency: The DISplay:WAVEView1:RF_FREQuency<x> command tree.
.rf_magnitude: The DISplay:WAVEView1:RF_MAGnitude<x> command tree.
.rf_phase: The DISplay:WAVEView1:RF_PHASe<x> command tree.
.style: The DISplay:WAVEView1:STYle command.
.viewstyle: The DISplay:WAVEView1:VIEWStyle command.
.zoom: The DISplay:WAVEView1:ZOOM command.

bus `property` ¶

bus: DisplayWaveview1Bus

Return the DISplay:WAVEView1:BUS command tree.

Usage

Using the .query() method will send the DISplay:WAVEView1:BUS? query.
Using the .verify(value) method will send the DISplay:WAVEView1:BUS? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.b: The DISplay:WAVEView1:BUS:B<x> command tree.

ch `property` ¶

ch: dict[int, DisplayWaveview1Channel]

Return the DISplay:WAVEView1:CH<x> command tree.

Usage

Using the .query() method will send the DISplay:WAVEView1:CH<x>? query.
Using the .verify(value) method will send the DISplay:WAVEView1:CH<x>? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.state: The DISplay:WAVEView1:CH<x>:STATE command.
.vertical: The DISplay:WAVEView1:CH<x>:VERTical command tree.
.d: The DISplay:WAVEView1:CH<x>_D<x> command tree.
.dall: The DISplay:WAVEView1:CH<x>_DALL command tree.

cursor `property` ¶

cursor: DisplayWaveview1Cursor

Return the DISplay:WAVEView1:CURSor command.

Description

This query returns the cursor parameters for the specified Waveform View. Note: 1 is the specified Waveform View and must be WAVEView1.

Usage

Using the .query() method will send the DISplay:WAVEView1:CURSor? query.
Using the .verify(value) method will send the DISplay:WAVEView1:CURSor? query and raise an AssertionError if the returned value does not match value.

SCPI Syntax

- DISplay:WAVEView1:CURSor?

Sub-properties

.cursor: The DISplay:WAVEView1:CURSor:CURSOR command tree.
.cursor1: The DISplay:WAVEView1:CURSor:CURSOR1 command.

filter `property` ¶

filter: DisplayWaveview1Filter

Return the DISplay:WAVEView1:FILTer command.

Description

This command sets or queries the type of interpolation filter for the display. Note: 1 is the specified Waveform View and must be WAVEView1.

Usage

Using the .write(value) method will send the DISplay:WAVEView1:FILTer value command.

SCPI Syntax

- DISplay:WAVEView1:FILTer {SINX|LINear}

Info

LINear specifies linear interpolation, where acquired points are connected with straight lines.
SINX specifies sin(x)/x interpolation, where acquired points are fit to a curve.

graticule `property` ¶

graticule: DisplayWaveview1Graticule

Return the DISplay:WAVEView1:GRAticule command.

Description

This command selects or queries the type of graticule that is displayed. Note: 1 is the specified Waveform View and must be WAVEView1.

Usage

Using the .query() method will send the DISplay:WAVEView1:GRAticule? query.
Using the .verify(value) method will send the DISplay:WAVEView1:GRAticule? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:WAVEView1:GRAticule value command.

SCPI Syntax

- DISplay:WAVEView1:GRAticule {GRId|TIMe|FULl|NONe}
- DISplay:WAVEView1:GRAticule?

Info

GRId specifies a frame and grid only.
TIMe specifies a time graticule only.
FULl specifies a frame, a grid and cross hairs.
NONe specified no graticule.

intensity `property` ¶

intensity: DisplayWaveview1Intensity

Return the DISplay:WAVEView1:INTENSITy command tree.

Usage

Using the .query() method will send the DISplay:WAVEView1:INTENSITy? query.
Using the .verify(value) method will send the DISplay:WAVEView1:INTENSITy? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.graticule: The DISplay:WAVEView1:INTENSITy:GRATicule command.
.waveform: The DISplay:WAVEView1:INTENSITy:WAVEform command.

math `property` ¶

math: DisplayWaveview1Math

Return the DISplay:WAVEView1:MATH command tree.

Usage

Using the .query() method will send the DISplay:WAVEView1:MATH? query.
Using the .verify(value) method will send the DISplay:WAVEView1:MATH? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.math: The DISplay:WAVEView1:MATH:MATH<x> command tree.

plot `property` ¶

plot: DisplayWaveview1Plot

Return the DISplay:WAVEView1:PLOT command tree.

Usage

Using the .query() method will send the DISplay:WAVEView1:PLOT? query.
Using the .verify(value) method will send the DISplay:WAVEView1:PLOT? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.plot: The DISplay:WAVEView1:PLOT:PLOT<x> command tree.

ref `property` ¶

ref: DisplayWaveview1Ref

Return the DISplay:WAVEView1:REF command tree.

Usage

Using the .query() method will send the DISplay:WAVEView1:REF? query.
Using the .verify(value) method will send the DISplay:WAVEView1:REF? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.ref: The DISplay:WAVEView1:REF:REF<x> command tree.

refx `property` ¶

refx: dict[int, DisplayWaveview1RefItem]

Return the DISplay:WAVEView1:REF<x> command tree.

Usage

Using the .query() method will send the DISplay:WAVEView1:REF<x>? query.
Using the .verify(value) method will send the DISplay:WAVEView1:REF<x>? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.dall: The DISplay:WAVEView1:REF<x>_DALL command tree.

rf_frequency `property` ¶

rf_frequency: dict[int, DisplayWaveview1RfFrequencyItem]

Return the DISplay:WAVEView1:RF_FREQuency<x> command tree.

Usage

Using the .query() method will send the DISplay:WAVEView1:RF_FREQuency<x>? query.
Using the .verify(value) method will send the DISplay:WAVEView1:RF_FREQuency<x>? query and raise an AssertionError if the returned value does not match value.

Info

RF_FREQuency<x> specifies the number of the Frequency vs. Time waveform.

Sub-properties

.vertical: The DISplay:WAVEView1:RF_FREQuency<x>:VERTical command tree.

rf_magnitude `property` ¶

rf_magnitude: dict[int, DisplayWaveview1RfMagnitudeItem]

Return the DISplay:WAVEView1:RF_MAGnitude<x> command tree.

Usage

Using the .query() method will send the DISplay:WAVEView1:RF_MAGnitude<x>? query.
Using the .verify(value) method will send the DISplay:WAVEView1:RF_MAGnitude<x>? query and raise an AssertionError if the returned value does not match value.

Info

RF_MAGnitude<x> specifies the number of the Magnitude vs. Time Frequency waveform.

Sub-properties

.vertical: The DISplay:WAVEView1:RF_MAGnitude<x>:VERTical command tree.

rf_phase `property` ¶

rf_phase: dict[int, DisplayWaveview1RfPhaseItem]

Return the DISplay:WAVEView1:RF_PHASe<x> command tree.

Usage

Using the .query() method will send the DISplay:WAVEView1:RF_PHASe<x>? query.
Using the .verify(value) method will send the DISplay:WAVEView1:RF_PHASe<x>? query and raise an AssertionError if the returned value does not match value.

Info

RF_PHASe<x> specifies the number of the Phase vs. Time Frequency waveform.

Sub-properties

.vertical: The DISplay:WAVEView1:RF_PHASe<x>:VERTical command tree.

style `property` ¶

style: DisplayWaveview1Style

Return the DISplay:WAVEView1:STYle command.

Description

This command sets or queries how the waveforms are displayed for analysis mode. Note: 1 is the specified Waveform View and must be WAVEView1.

Usage

Using the .query() method will send the DISplay:WAVEView1:STYle? query.
Using the .verify(value) method will send the DISplay:WAVEView1:STYle? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:WAVEView1:STYle value command.

SCPI Syntax

- DISplay:WAVEView1:STYle {VECtors|DOTsonly}
- DISplay:WAVEView1:STYle?

Info

DOTsonly displays individual data points. New points immediately replace old ones.
VECtors connects adjacent data points. New points immediately replace old ones.

viewstyle `property` ¶

viewstyle: DisplayWaveview1Viewstyle

Return the DISplay:WAVEView1:VIEWStyle command.

Description

The command sets or queries the waveform layout style used by the display. Note: 1 is the specified Waveform View and must be WAVEView1.

Usage

Using the .query() method will send the DISplay:WAVEView1:VIEWStyle? query.
Using the .verify(value) method will send the DISplay:WAVEView1:VIEWStyle? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:WAVEView1:VIEWStyle value command.

SCPI Syntax

- DISplay:WAVEView1:VIEWStyle {OVErlay|STAcked}
- DISplay:WAVEView1:VIEWStyle?

Info

OVErlay specifies that the display view style used by the specified Waveform View is overlay.
STAcked specifies that the display view style used by the specified Waveform View is stacked.

zoom `property` ¶

zoom: DisplayWaveview1Zoom

Return the DISplay:WAVEView1:ZOOM command.

Description

This query returns the zoom parameters of the specified Waveform View. Note: 1 is the specified Waveform View and must be WAVEView1.

Usage

Using the .query() method will send the DISplay:WAVEView1:ZOOM? query.
Using the .verify(value) method will send the DISplay:WAVEView1:ZOOM? query and raise an AssertionError if the returned value does not match value.

SCPI Syntax

- DISplay:WAVEView1:ZOOM?

Sub-properties

.zoom1: The DISplay:WAVEView1:ZOOM:ZOOM1 command.

DisplayWaveview1Bus ¶

Bases: SCPICmdRead

The DISplay:WAVEView1:BUS command tree.

Usage

Using the .query() method will send the DISplay:WAVEView1:BUS? query.
Using the .verify(value) method will send the DISplay:WAVEView1:BUS? query and raise an AssertionError if the returned value does not match value.

Properties

.b: The DISplay:WAVEView1:BUS:B<x> command tree.

b `property` ¶

b: dict[int, DisplayWaveview1BusBItem]

Return the DISplay:WAVEView1:BUS:B<x> command tree.

Usage

Using the .query() method will send the DISplay:WAVEView1:BUS:B<x>? query.
Using the .verify(value) method will send the DISplay:WAVEView1:BUS:B<x>? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.state: The DISplay:WAVEView1:BUS:B<x>:STATE command.
.vertical: The DISplay:WAVEView1:BUS:B<x>:VERTical command tree.

DisplayWaveview1BusBItem ¶

Bases: ValidatedDynamicNumberCmd, SCPICmdRead

The DISplay:WAVEView1:BUS:B<x> command tree.

Usage

Using the .query() method will send the DISplay:WAVEView1:BUS:B<x>? query.
Using the .verify(value) method will send the DISplay:WAVEView1:BUS:B<x>? query and raise an AssertionError if the returned value does not match value.

Properties

.state: The DISplay:WAVEView1:BUS:B<x>:STATE command.
.vertical: The DISplay:WAVEView1:BUS:B<x>:VERTical command tree.

state `property` ¶

state: DisplayWaveview1BusBItemState

Return the DISplay:WAVEView1:BUS:B<x>:STATE command.

Description

Sets or queries the state of the specified bus in the specified Waveform View. Note: 1 is the specified Waveform View and must be WAVEView1.

Usage

Using the .query() method will send the DISplay:WAVEView1:BUS:B<x>:STATE? query.
Using the .verify(value) method will send the DISplay:WAVEView1:BUS:B<x>:STATE? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:WAVEView1:BUS:B<x>:STATE value command.

SCPI Syntax

- DISplay:WAVEView1:BUS:B<x>:STATE {ON|OFF|1|0}
- DISplay:WAVEView1:BUS:B<x>:STATE?

Info

0 turns specified bus off.
1 turns the specified bus on.
ON turns the specified bus on.
OFF turns specified bus off.

vertical `property` ¶

vertical: DisplayWaveview1BusBItemVertical

Return the DISplay:WAVEView1:BUS:B<x>:VERTical command tree.

Usage

Using the .query() method will send the DISplay:WAVEView1:BUS:B<x>:VERTical? query.
Using the .verify(value) method will send the DISplay:WAVEView1:BUS:B<x>:VERTical? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.position: The DISplay:WAVEView1:BUS:B<x>:VERTical:POSition command.

DisplayWaveview1BusBItemState ¶

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:WAVEView1:BUS:B<x>:STATE command.

Description

Sets or queries the state of the specified bus in the specified Waveform View. Note: 1 is the specified Waveform View and must be WAVEView1.

Usage

Using the .query() method will send the DISplay:WAVEView1:BUS:B<x>:STATE? query.
Using the .verify(value) method will send the DISplay:WAVEView1:BUS:B<x>:STATE? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:WAVEView1:BUS:B<x>:STATE value command.

SCPI Syntax

- DISplay:WAVEView1:BUS:B<x>:STATE {ON|OFF|1|0}
- DISplay:WAVEView1:BUS:B<x>:STATE?

Info

0 turns specified bus off.
1 turns the specified bus on.
ON turns the specified bus on.
OFF turns specified bus off.

DisplayWaveview1BusBItemVertical ¶

Bases: SCPICmdRead

The DISplay:WAVEView1:BUS:B<x>:VERTical command tree.

Usage

Using the .query() method will send the DISplay:WAVEView1:BUS:B<x>:VERTical? query.
Using the .verify(value) method will send the DISplay:WAVEView1:BUS:B<x>:VERTical? query and raise an AssertionError if the returned value does not match value.

Properties

.position: The DISplay:WAVEView1:BUS:B<x>:VERTical:POSition command.

position `property` ¶

position: DisplayWaveview1BusBItemVerticalPosition

Return the DISplay:WAVEView1:BUS:B<x>:VERTical:POSition command.

Description

Sets or queries the vertical position of the specified bus in the specified Waveform View. Note: 1 is the specified Waveform View and must be WAVEView1.

Usage

Using the .query() method will send the DISplay:WAVEView1:BUS:B<x>:VERTical:POSition? query.
Using the .verify(value) method will send the DISplay:WAVEView1:BUS:B<x>:VERTical:POSition? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:WAVEView1:BUS:B<x>:VERTical:POSition value command.

SCPI Syntax

- DISplay:WAVEView1:BUS:B<x>:VERTical:POSition <NR3>
- DISplay:WAVEView1:BUS:B<x>:VERTical:POSition?

Info

<NR3> is the vertical position of the specified bus.

DisplayWaveview1BusBItemVerticalPosition ¶

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:WAVEView1:BUS:B<x>:VERTical:POSition command.

Description

Sets or queries the vertical position of the specified bus in the specified Waveform View. Note: 1 is the specified Waveform View and must be WAVEView1.

Usage

Using the .query() method will send the DISplay:WAVEView1:BUS:B<x>:VERTical:POSition? query.
Using the .verify(value) method will send the DISplay:WAVEView1:BUS:B<x>:VERTical:POSition? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:WAVEView1:BUS:B<x>:VERTical:POSition value command.

SCPI Syntax

- DISplay:WAVEView1:BUS:B<x>:VERTical:POSition <NR3>
- DISplay:WAVEView1:BUS:B<x>:VERTical:POSition?

Info

<NR3> is the vertical position of the specified bus.

DisplayWaveview1Channel ¶

Bases: ValidatedChannel, SCPICmdRead

The DISplay:WAVEView1:CH<x> command tree.

Usage

Using the .query() method will send the DISplay:WAVEView1:CH<x>? query.
Using the .verify(value) method will send the DISplay:WAVEView1:CH<x>? query and raise an AssertionError if the returned value does not match value.

Properties

.state: The DISplay:WAVEView1:CH<x>:STATE command.
.vertical: The DISplay:WAVEView1:CH<x>:VERTical command tree.
.d: The DISplay:WAVEView1:CH<x>_D<x> command tree.
.dall: The DISplay:WAVEView1:CH<x>_DALL command tree.

d `property` ¶

d: dict[int, DisplayWaveview1ChannelDigitalBit]

Return the DISplay:WAVEView1:CH<x>_D<x> command tree.

Usage

Using the .query() method will send the DISplay:WAVEView1:CH<x>_D<x>? query.
Using the .verify(value) method will send the DISplay:WAVEView1:CH<x>_D<x>? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.state: The DISplay:WAVEView1:CH<x>_D<x>:STATE command.

dall `property` ¶

dall: DisplayWaveview1ChannelDall

Return the DISplay:WAVEView1:CH<x>_DALL command tree.

Usage

Using the .query() method will send the DISplay:WAVEView1:CH<x>_DALL? query.
Using the .verify(value) method will send the DISplay:WAVEView1:CH<x>_DALL? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.state: The DISplay:WAVEView1:CH<x>_DALL:STATE command.
.vertical: The DISplay:WAVEView1:CH<x>_DALL:VERTical command tree.

state `property` ¶

state: DisplayWaveview1ChannelState

Return the DISplay:WAVEView1:CH<x>:STATE command.

Description

Sets or queries the state of the specified channel in the specified Waveform View. Note: 1 is the specified Waveform View and must be WAVEView1.

Usage

Using the .query() method will send the DISplay:WAVEView1:CH<x>:STATE? query.
Using the .verify(value) method will send the DISplay:WAVEView1:CH<x>:STATE? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:WAVEView1:CH<x>:STATE value command.

SCPI Syntax

- DISplay:WAVEView1:CH<x>:STATE {ON|OFF|<NR1>}
- DISplay:WAVEView1:CH<x>:STATE?

Info

<NR1> = 0 disables the specified channel on the specified Waveform View; any other value turns this feature on.
OFF disables the display the specified channel on the specified Waveform View.
ON enables the specified channel on the specified Waveform View.

vertical `property` ¶

vertical: DisplayWaveview1ChannelVertical

Return the DISplay:WAVEView1:CH<x>:VERTical command tree.

Usage

Using the .query() method will send the DISplay:WAVEView1:CH<x>:VERTical? query.
Using the .verify(value) method will send the DISplay:WAVEView1:CH<x>:VERTical? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.position: The DISplay:WAVEView1:CH<x>:VERTical:POSition command.
.scale: The DISplay:WAVEView1:CH<x>:VERTical:SCAle command.

DisplayWaveview1ChannelDall ¶

Bases: SCPICmdRead

The DISplay:WAVEView1:CH<x>_DALL command tree.

Usage

Using the .query() method will send the DISplay:WAVEView1:CH<x>_DALL? query.
Using the .verify(value) method will send the DISplay:WAVEView1:CH<x>_DALL? query and raise an AssertionError if the returned value does not match value.

Properties

.state: The DISplay:WAVEView1:CH<x>_DALL:STATE command.
.vertical: The DISplay:WAVEView1:CH<x>_DALL:VERTical command tree.

state `property` ¶

state: DisplayWaveview1ChannelDallState

Return the DISplay:WAVEView1:CH<x>_DALL:STATE command.

Description

This command sets or queries the display state of the specified digital channel in the specified Waveform View.

Usage

Using the .query() method will send the DISplay:WAVEView1:CH<x>_DALL:STATE? query.
Using the .verify(value) method will send the DISplay:WAVEView1:CH<x>_DALL:STATE? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:WAVEView1:CH<x>_DALL:STATE value command.

SCPI Syntax

- DISplay:WAVEView1:CH<x>_DALL:STATE {ON|OFF|<NR1>}
- DISplay:WAVEView1:CH<x>_DALL:STATE?

Info

<NR1> = 0 disables the display of the specified channels on the specified Waveform View; any other value turns this feature on.
OFF disables the display of the specified channels on the specifiedWaveform View.
ON enables the display of the specified channels on the specified Waveform View.

vertical `property` ¶

vertical: DisplayWaveview1ChannelDallVertical

Return the DISplay:WAVEView1:CH<x>_DALL:VERTical command tree.

Usage

Using the .query() method will send the DISplay:WAVEView1:CH<x>_DALL:VERTical? query.
Using the .verify(value) method will send the DISplay:WAVEView1:CH<x>_DALL:VERTical? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.position: The DISplay:WAVEView1:CH<x>_DALL:VERTical:POSition command.

DisplayWaveview1ChannelDallState ¶

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:WAVEView1:CH<x>_DALL:STATE command.

Description

This command sets or queries the display state of the specified digital channel in the specified Waveform View.

Usage

Using the .query() method will send the DISplay:WAVEView1:CH<x>_DALL:STATE? query.
Using the .verify(value) method will send the DISplay:WAVEView1:CH<x>_DALL:STATE? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:WAVEView1:CH<x>_DALL:STATE value command.

SCPI Syntax

- DISplay:WAVEView1:CH<x>_DALL:STATE {ON|OFF|<NR1>}
- DISplay:WAVEView1:CH<x>_DALL:STATE?

Info

<NR1> = 0 disables the display of the specified channels on the specified Waveform View; any other value turns this feature on.
OFF disables the display of the specified channels on the specifiedWaveform View.
ON enables the display of the specified channels on the specified Waveform View.

DisplayWaveview1ChannelDallVertical ¶

Bases: SCPICmdRead

The DISplay:WAVEView1:CH<x>_DALL:VERTical command tree.

Usage

Using the .query() method will send the DISplay:WAVEView1:CH<x>_DALL:VERTical? query.
Using the .verify(value) method will send the DISplay:WAVEView1:CH<x>_DALL:VERTical? query and raise an AssertionError if the returned value does not match value.

Properties

.position: The DISplay:WAVEView1:CH<x>_DALL:VERTical:POSition command.

position `property` ¶

position: DisplayWaveview1ChannelDallVerticalPosition

Return the DISplay:WAVEView1:CH<x>_DALL:VERTical:POSition command.

Description

This command sets or queries the vertical position of the specified digital channel in the specified Waveform View in divisions. The position ranges from 5.0 to -5.0 divisions.

Usage

Using the .query() method will send the DISplay:WAVEView1:CH<x>_DALL:VERTical:POSition? query.
Using the .verify(value) method will send the DISplay:WAVEView1:CH<x>_DALL:VERTical:POSition? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:WAVEView1:CH<x>_DALL:VERTical:POSition value command.

SCPI Syntax

- DISplay:WAVEView1:CH<x>_DALL:VERTical:POSition <NR3>
- DISplay:WAVEView1:CH<x>_DALL:VERTical:POSition?

Info

<NR3> is the vertical position of the specified digital channel in the specified Waveform View in divisions.

DisplayWaveview1ChannelDallVerticalPosition ¶

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:WAVEView1:CH<x>_DALL:VERTical:POSition command.

Description

This command sets or queries the vertical position of the specified digital channel in the specified Waveform View in divisions. The position ranges from 5.0 to -5.0 divisions.

Usage

Using the .query() method will send the DISplay:WAVEView1:CH<x>_DALL:VERTical:POSition? query.
Using the .verify(value) method will send the DISplay:WAVEView1:CH<x>_DALL:VERTical:POSition? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:WAVEView1:CH<x>_DALL:VERTical:POSition value command.

SCPI Syntax

- DISplay:WAVEView1:CH<x>_DALL:VERTical:POSition <NR3>
- DISplay:WAVEView1:CH<x>_DALL:VERTical:POSition?

Info

<NR3> is the vertical position of the specified digital channel in the specified Waveform View in divisions.

DisplayWaveview1ChannelDigitalBit ¶

Bases: ValidatedDigitalBit, SCPICmdRead

The DISplay:WAVEView1:CH<x>_D<x> command tree.

Usage

Using the .query() method will send the DISplay:WAVEView1:CH<x>_D<x>? query.
Using the .verify(value) method will send the DISplay:WAVEView1:CH<x>_D<x>? query and raise an AssertionError if the returned value does not match value.

Properties

.state: The DISplay:WAVEView1:CH<x>_D<x>:STATE command.

state `property` ¶

state: DisplayWaveview1ChannelDigitalBitState

Return the DISplay:WAVEView1:CH<x>_D<x>:STATE command.

Description

This command sets or queries the display state of the specified digital channel in the specified Waveform View.

Usage

Using the .query() method will send the DISplay:WAVEView1:CH<x>_D<x>:STATE? query.
Using the .verify(value) method will send the DISplay:WAVEView1:CH<x>_D<x>:STATE? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:WAVEView1:CH<x>_D<x>:STATE value command.

SCPI Syntax

- DISplay:WAVEView1:CH<x>_D<x>:STATE {ON|OFF|<NR1>}
- DISplay:WAVEView1:CH<x>_D<x>:STATE?

Info

<NR1> = 0 disables the display of the specified channel on the specified Waveform View; any other value turns this feature on.
OFF disables the display of the specified channel on the specified Waveform View.
ON enables the display of the specified channel on the specified Waveform View.

DisplayWaveview1ChannelDigitalBitState ¶

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:WAVEView1:CH<x>_D<x>:STATE command.

Description

This command sets or queries the display state of the specified digital channel in the specified Waveform View.

Usage

Using the .query() method will send the DISplay:WAVEView1:CH<x>_D<x>:STATE? query.
Using the .verify(value) method will send the DISplay:WAVEView1:CH<x>_D<x>:STATE? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:WAVEView1:CH<x>_D<x>:STATE value command.

SCPI Syntax

- DISplay:WAVEView1:CH<x>_D<x>:STATE {ON|OFF|<NR1>}
- DISplay:WAVEView1:CH<x>_D<x>:STATE?

Info

<NR1> = 0 disables the display of the specified channel on the specified Waveform View; any other value turns this feature on.
OFF disables the display of the specified channel on the specified Waveform View.
ON enables the display of the specified channel on the specified Waveform View.

DisplayWaveview1ChannelState ¶

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:WAVEView1:CH<x>:STATE command.

Description

Sets or queries the state of the specified channel in the specified Waveform View. Note: 1 is the specified Waveform View and must be WAVEView1.

Usage

Using the .query() method will send the DISplay:WAVEView1:CH<x>:STATE? query.
Using the .verify(value) method will send the DISplay:WAVEView1:CH<x>:STATE? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:WAVEView1:CH<x>:STATE value command.

SCPI Syntax

- DISplay:WAVEView1:CH<x>:STATE {ON|OFF|<NR1>}
- DISplay:WAVEView1:CH<x>:STATE?

Info

<NR1> = 0 disables the specified channel on the specified Waveform View; any other value turns this feature on.
OFF disables the display the specified channel on the specified Waveform View.
ON enables the specified channel on the specified Waveform View.

DisplayWaveview1ChannelVertical ¶

Bases: SCPICmdRead

The DISplay:WAVEView1:CH<x>:VERTical command tree.

Usage

Using the .query() method will send the DISplay:WAVEView1:CH<x>:VERTical? query.
Using the .verify(value) method will send the DISplay:WAVEView1:CH<x>:VERTical? query and raise an AssertionError if the returned value does not match value.

Properties

.position: The DISplay:WAVEView1:CH<x>:VERTical:POSition command.
.scale: The DISplay:WAVEView1:CH<x>:VERTical:SCAle command.

position `property` ¶

position: DisplayWaveview1ChannelVerticalPosition

Return the DISplay:WAVEView1:CH<x>:VERTical:POSition command.

Description

Sets or queries the vertical position of the specified channel in the specified Waveform View in divisions. 0.0 divisions is center, 5.0 top of the window, and -5.0 the bottom of the window. Note: 1 is the specified Waveform View and must be WAVEView1.

Usage

Using the .query() method will send the DISplay:WAVEView1:CH<x>:VERTical:POSition? query.
Using the .verify(value) method will send the DISplay:WAVEView1:CH<x>:VERTical:POSition? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:WAVEView1:CH<x>:VERTical:POSition value command.

SCPI Syntax

- DISplay:WAVEView1:CH<x>:VERTical:POSition <NR3>
- DISplay:WAVEView1:CH<x>:VERTical:POSition?

Info

<NR3> is the vertical position in divisions. 0.0 divisions is center, 5.0 top of the window, and -5.0 the bottom of the window.

scale `property` ¶

scale: DisplayWaveview1ChannelVerticalScale

Return the DISplay:WAVEView1:CH<x>:VERTical:SCAle command.

Description

Sets or queries the vertical scale of the specified channel in volts per division within the specified Waveform View. Note: 1 is the specified Waveform View and must be WAVEView1.

Usage

Using the .query() method will send the DISplay:WAVEView1:CH<x>:VERTical:SCAle? query.
Using the .verify(value) method will send the DISplay:WAVEView1:CH<x>:VERTical:SCAle? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:WAVEView1:CH<x>:VERTical:SCAle value command.

SCPI Syntax

- DISplay:WAVEView1:CH<x>:VERTical:SCAle <NR3>
- DISplay:WAVEView1:CH<x>:VERTical:SCAle?

Info

<NR3> is the vertical scale of the specified channel.

DisplayWaveview1ChannelVerticalPosition ¶

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:WAVEView1:CH<x>:VERTical:POSition command.

Description

Sets or queries the vertical position of the specified channel in the specified Waveform View in divisions. 0.0 divisions is center, 5.0 top of the window, and -5.0 the bottom of the window. Note: 1 is the specified Waveform View and must be WAVEView1.

Usage

Using the .query() method will send the DISplay:WAVEView1:CH<x>:VERTical:POSition? query.
Using the .verify(value) method will send the DISplay:WAVEView1:CH<x>:VERTical:POSition? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:WAVEView1:CH<x>:VERTical:POSition value command.

SCPI Syntax

- DISplay:WAVEView1:CH<x>:VERTical:POSition <NR3>
- DISplay:WAVEView1:CH<x>:VERTical:POSition?

Info

<NR3> is the vertical position in divisions. 0.0 divisions is center, 5.0 top of the window, and -5.0 the bottom of the window.

DisplayWaveview1ChannelVerticalScale ¶

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:WAVEView1:CH<x>:VERTical:SCAle command.

Description

Sets or queries the vertical scale of the specified channel in volts per division within the specified Waveform View. Note: 1 is the specified Waveform View and must be WAVEView1.

Usage

Using the .query() method will send the DISplay:WAVEView1:CH<x>:VERTical:SCAle? query.
Using the .verify(value) method will send the DISplay:WAVEView1:CH<x>:VERTical:SCAle? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:WAVEView1:CH<x>:VERTical:SCAle value command.

SCPI Syntax

- DISplay:WAVEView1:CH<x>:VERTical:SCAle <NR3>
- DISplay:WAVEView1:CH<x>:VERTical:SCAle?

Info

<NR3> is the vertical scale of the specified channel.

DisplayWaveview1Cursor ¶

Bases: SCPICmdRead

The DISplay:WAVEView1:CURSor command.

Description

This query returns the cursor parameters for the specified Waveform View. Note: 1 is the specified Waveform View and must be WAVEView1.

Usage

Using the .query() method will send the DISplay:WAVEView1:CURSor? query.
Using the .verify(value) method will send the DISplay:WAVEView1:CURSor? query and raise an AssertionError if the returned value does not match value.

SCPI Syntax

- DISplay:WAVEView1:CURSor?

Properties

.cursor: The DISplay:WAVEView1:CURSor:CURSOR command tree.
.cursor1: The DISplay:WAVEView1:CURSor:CURSOR1 command.

cursor `property` ¶

cursor: DisplayWaveview1CursorCursor

Return the DISplay:WAVEView1:CURSor:CURSOR command tree.

Usage

Using the .query() method will send the DISplay:WAVEView1:CURSor:CURSOR? query.
Using the .verify(value) method will send the DISplay:WAVEView1:CURSor:CURSOR? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.waveform: The DISplay:WAVEView1:CURSor:CURSOR:WAVEform command tree.

cursor1 `property` ¶

cursor1: DisplayWaveview1CursorCursor1

Return the DISplay:WAVEView1:CURSor:CURSOR1 command.

Description

This query returns the cursor parameters for the specified cursor in the specified Waveform View. Note: 1 is the specified Waveform View and must be WAVEView1. Cursor is the specified cursor and must be CURSOR1.

Usage

Using the .query() method will send the DISplay:WAVEView1:CURSor:CURSOR1? query.
Using the .verify(value) method will send the DISplay:WAVEView1:CURSor:CURSOR1? query and raise an AssertionError if the returned value does not match value.

SCPI Syntax

- DISplay:WAVEView1:CURSor:CURSOR1?

Sub-properties

.asource: The DISplay:WAVEView1:CURSor:CURSOR1:ASOUrce command.
.bsource: The DISplay:WAVEView1:CURSor:CURSOR1:BSOUrce command.
.ddt: The DISplay:WAVEView1:CURSor:CURSOR1:DDT command.
.function: The DISplay:WAVEView1:CURSor:CURSOR1:FUNCtion command.
.hbars: The DISplay:WAVEView1:CURSor:CURSOR1:HBArs command tree.
.mode: The DISplay:WAVEView1:CURSor:CURSOR1:MODe command.
.oneoverdeltatvalue: The DISplay:WAVEView1:CURSor:CURSOR1:ONEOVERDELTATVALUE command.
.screen: The DISplay:WAVEView1:CURSor:CURSOR1:SCREEN command tree.
.splitmode: The DISplay:WAVEView1:CURSor:CURSOR1:SPLITMODE command.
.state: The DISplay:WAVEView1:CURSor:CURSOR1:STATE command.
.vbars: The DISplay:WAVEView1:CURSor:CURSOR1:VBArs command tree.
.waveform: The DISplay:WAVEView1:CURSor:CURSOR1:WAVEform command tree.

DisplayWaveview1CursorCursor ¶

Bases: SCPICmdRead

The DISplay:WAVEView1:CURSor:CURSOR command tree.

Usage

Using the .query() method will send the DISplay:WAVEView1:CURSor:CURSOR? query.
Using the .verify(value) method will send the DISplay:WAVEView1:CURSor:CURSOR? query and raise an AssertionError if the returned value does not match value.

Properties

.waveform: The DISplay:WAVEView1:CURSor:CURSOR:WAVEform command tree.

waveform `property` ¶

waveform: DisplayWaveview1CursorCursorWaveform

Return the DISplay:WAVEView1:CURSor:CURSOR:WAVEform command tree.

Usage

Using the .query() method will send the DISplay:WAVEView1:CURSor:CURSOR:WAVEform? query.
Using the .verify(value) method will send the DISplay:WAVEView1:CURSor:CURSOR:WAVEform? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.all: The DISplay:WAVEView1:CURSor:CURSOR:WAVEform:ALL command tree.
.avposition: The DISplay:WAVEView1:CURSor:CURSOR:WAVEform:AVPOSition command.
.bvposition: The DISplay:WAVEView1:CURSor:CURSOR:WAVEform:BVPOSition command.

DisplayWaveview1CursorCursor1 ¶

Bases: SCPICmdRead

The DISplay:WAVEView1:CURSor:CURSOR1 command.

Description

This query returns the cursor parameters for the specified cursor in the specified Waveform View. Note: 1 is the specified Waveform View and must be WAVEView1. Cursor is the specified cursor and must be CURSOR1.

Usage

Using the .query() method will send the DISplay:WAVEView1:CURSor:CURSOR1? query.
Using the .verify(value) method will send the DISplay:WAVEView1:CURSor:CURSOR1? query and raise an AssertionError if the returned value does not match value.

SCPI Syntax

- DISplay:WAVEView1:CURSor:CURSOR1?

Properties

.asource: The DISplay:WAVEView1:CURSor:CURSOR1:ASOUrce command.
.bsource: The DISplay:WAVEView1:CURSor:CURSOR1:BSOUrce command.
.ddt: The DISplay:WAVEView1:CURSor:CURSOR1:DDT command.
.function: The DISplay:WAVEView1:CURSor:CURSOR1:FUNCtion command.
.hbars: The DISplay:WAVEView1:CURSor:CURSOR1:HBArs command tree.
.mode: The DISplay:WAVEView1:CURSor:CURSOR1:MODe command.
.oneoverdeltatvalue: The DISplay:WAVEView1:CURSor:CURSOR1:ONEOVERDELTATVALUE command.
.screen: The DISplay:WAVEView1:CURSor:CURSOR1:SCREEN command tree.
.splitmode: The DISplay:WAVEView1:CURSor:CURSOR1:SPLITMODE command.
.state: The DISplay:WAVEView1:CURSor:CURSOR1:STATE command.
.vbars: The DISplay:WAVEView1:CURSor:CURSOR1:VBArs command tree.
.waveform: The DISplay:WAVEView1:CURSor:CURSOR1:WAVEform command tree.

asource `property` ¶

asource: DisplayWaveview1CursorCursor1Asource

Return the DISplay:WAVEView1:CURSor:CURSOR1:ASOUrce command.

Description

This command sets or queries the cursor A source of the specified cursor in the specified Waveform View. Note: 1 is the specified Waveform View and must be WAVEView1. Cursor is the specified cursor and must be CURSOR1.

Usage

Using the .query() method will send the DISplay:WAVEView1:CURSor:CURSOR1:ASOUrce? query.
Using the .verify(value) method will send the DISplay:WAVEView1:CURSor:CURSOR1:ASOUrce? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:WAVEView1:CURSor:CURSOR1:ASOUrce value command.

SCPI Syntax

- DISplay:WAVEView1:CURSor:CURSOR1:ASOUrce {AUTO|CH<x>|BUS<x>|MATH<x>|REF<x>|PLOT<x>}
- DISplay:WAVEView1:CURSor:CURSOR1:ASOUrce?

Info

AUTO specifies to use the selected source.
CH<x> specifies an analog channel as source.
MATH<x> specifies a math channel as source.
BUS<x> specifies a bus as source.
REF<x> specifies a reference waveform as the source.
PLOT<x> specifies a plot as the source.

bsource `property` ¶

bsource: DisplayWaveview1CursorCursor1Bsource

Return the DISplay:WAVEView1:CURSor:CURSOR1:BSOUrce command.

Description

This command sets or queries the cursor B source of the specified cursor in the specified Waveform View. Note: 1 is the specified Waveform View and must be WAVEView1. Cursor is the specified cursor and must be CURSOR1.

Usage

Using the .query() method will send the DISplay:WAVEView1:CURSor:CURSOR1:BSOUrce? query.
Using the .verify(value) method will send the DISplay:WAVEView1:CURSor:CURSOR1:BSOUrce? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:WAVEView1:CURSor:CURSOR1:BSOUrce value command.

SCPI Syntax

- DISplay:WAVEView1:CURSor:CURSOR1:BSOUrce {CH<x>|BUS<x>|MATH<x>|REF<x>|PLOT<x>}
- DISplay:WAVEView1:CURSor:CURSOR1:BSOUrce?

Info

CH<x> specifies an analog channel as source.
MATH<x> specifies a math channel as source.
BUS<x> specifies a bus as source.
REF<x> specifies a reference waveform as the source.
PLOT<x> specifies a plot as the source.

ddt `property` ¶

ddt: DisplayWaveview1CursorCursor1Ddt

Return the DISplay:WAVEView1:CURSor:CURSOR1:DDT command.

Description

This query returns the delta V over delta T cursor readout value of the specified cursor in the specified Waveform View. Note: 1 is the specified Waveform View and must be WAVEView1. Cursor is the specified cursor and must be CURSOR1.

Usage

Using the .query() method will send the DISplay:WAVEView1:CURSor:CURSOR1:DDT? query.
Using the .verify(value) method will send the DISplay:WAVEView1:CURSor:CURSOR1:DDT? query and raise an AssertionError if the returned value does not match value.

SCPI Syntax

- DISplay:WAVEView1:CURSor:CURSOR1:DDT?

function `property` ¶

function: DisplayWaveview1CursorCursor1Function

Return the DISplay:WAVEView1:CURSor:CURSOR1:FUNCtion command.

Description

This command sets or queries the cursor type of the specified cursor in the specified Waveform View. Note: 1 is the specified Waveform View and must be WAVEView1. Cursor is the specified cursor and must be CURSOR1.

Usage

Using the .query() method will send the DISplay:WAVEView1:CURSor:CURSOR1:FUNCtion? query.
Using the .verify(value) method will send the DISplay:WAVEView1:CURSor:CURSOR1:FUNCtion? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:WAVEView1:CURSor:CURSOR1:FUNCtion value command.

SCPI Syntax

- DISplay:WAVEView1:CURSor:CURSOR1:FUNCtion {SCREEN|WAVEFORM|VBArs|HBArs}
- DISplay:WAVEView1:CURSor:CURSOR1:FUNCtion?

Info

HBArs specifies horizontal bar cursors, which measure in vertical units.
VBArs specifies vertical bar cursors, which measure in horizontal units.
SCREEN specifies both horizontal and vertical bar cursors, which measure in horizontal and vertical units specified by the Cursor 1 and Cursor 2 Sources. Use these cursors to measure anywhere in the waveform display area.
WAVEFORM specifies paired or split cursors in YT display format for measuring waveform amplitude and time. In XY and XYZ format, these cursors indicate the amplitude positions of an XY pair (Ch1 vs Ch2 voltage, where Ch1 is the X axis and Ch2 is the Y axis) relative to the trigger.

hbars `property` ¶

hbars: DisplayWaveview1CursorCursor1Hbars

Return the DISplay:WAVEView1:CURSor:CURSOR1:HBArs command tree.

Usage

Using the .query() method will send the DISplay:WAVEView1:CURSor:CURSOR1:HBArs? query.
Using the .verify(value) method will send the DISplay:WAVEView1:CURSor:CURSOR1:HBArs? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.aposition: The DISplay:WAVEView1:CURSor:CURSOR1:HBArs:APOSition command.
.aunits: The DISplay:WAVEView1:CURSor:CURSOR1:HBArs:AUNIts command.
.bposition: The DISplay:WAVEView1:CURSor:CURSOR1:HBArs:BPOSition command.
.bunits: The DISplay:WAVEView1:CURSor:CURSOR1:HBArs:BUNIts command.
.delta: The DISplay:WAVEView1:CURSor:CURSOR1:HBArs:DELTa command.

mode `property` ¶

mode: DisplayWaveview1CursorCursor1Mode

Return the DISplay:WAVEView1:CURSor:CURSOR1:MODe command.

Description

Sets or queries the cursor tracking mode of the specified cursor in the specified Waveform View. Note: 1 is the specified Waveform View and must be WAVEView1. Cursor is the specified cursor and must be CURSOR1.

Usage

Using the .write(value) method will send the DISplay:WAVEView1:CURSor:CURSOR1:MODe value command.

SCPI Syntax

- DISplay:WAVEView1:CURSor:CURSOR1:MODe {INDEPENDENT|TRACK}

Info

TRACK ties the navigational functionality of the two cursors together. For cursor 1 adjustments, this ties the movement of the two cursors together; however, cursor 2 continues to move independently of cursor 1.
INDEPENDENT allows independent adjustment of the two cursors.

oneoverdeltatvalue `property` ¶

oneoverdeltatvalue: DisplayWaveview1CursorCursor1Oneoverdeltatvalue

Return the DISplay:WAVEView1:CURSor:CURSOR1:ONEOVERDELTATVALUE command.

Description

This query returns the one over delta T cursor readout value of the specified cursor in the specified Waveform View. NOTE. 1 is the specified Waveform View and must be WAVEView1. Cursoris the specified cursor and must be CURSOR1.

Usage

Using the .query() method will send the DISplay:WAVEView1:CURSor:CURSOR1:ONEOVERDELTATVALUE? query.
Using the .verify(value) method will send the DISplay:WAVEView1:CURSor:CURSOR1:ONEOVERDELTATVALUE? query and raise an AssertionError if the returned value does not match value.

SCPI Syntax

- DISplay:WAVEView1:CURSor:CURSOR1:ONEOVERDELTATVALUE?

screen `property` ¶

screen: DisplayWaveview1CursorCursor1Screen

Return the DISplay:WAVEView1:CURSor:CURSOR1:SCREEN command tree.

Usage

Using the .query() method will send the DISplay:WAVEView1:CURSor:CURSOR1:SCREEN? query.
Using the .verify(value) method will send the DISplay:WAVEView1:CURSor:CURSOR1:SCREEN? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.axposition: The DISplay:WAVEView1:CURSor:CURSOR1:SCREEN:AXPOSition command.
.ayposition: The DISplay:WAVEView1:CURSor:CURSOR1:SCREEN:AYPOSition command.
.bxposition: The DISplay:WAVEView1:CURSor:CURSOR1:SCREEN:BXPOSition command.
.byposition: The DISplay:WAVEView1:CURSor:CURSOR1:SCREEN:BYPOSition command.

splitmode `property` ¶

splitmode: DisplayWaveview1CursorCursor1Splitmode

Return the DISplay:WAVEView1:CURSor:CURSOR1:SPLITMODE command.

Description

This command sets or queries whether both cursors have the same or different sources. Note: 1 is the specified Waveform View and must be WAVEView1. Cursor is the specified cursor and must be CURSOR1.

Usage

Using the .query() method will send the DISplay:WAVEView1:CURSor:CURSOR1:SPLITMODE? query.
Using the .verify(value) method will send the DISplay:WAVEView1:CURSor:CURSOR1:SPLITMODE? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:WAVEView1:CURSor:CURSOR1:SPLITMODE value command.

SCPI Syntax

- DISplay:WAVEView1:CURSor:CURSOR1:SPLITMODE {SAME|SPLIT}
- DISplay:WAVEView1:CURSor:CURSOR1:SPLITMODE?

Info

SAME specifies both cursors have the same source.
SPLIT specifies the cursors have different sources.

state `property` ¶

state: DisplayWaveview1CursorCursor1State

Return the DISplay:WAVEView1:CURSor:CURSOR1:STATE command.

Description

This command sets or queries the visible state of the specified cursor in the specified Waveform View. Note: 1 is the specified Waveform View and must be WAVEView1. Cursor is the specified cursor and must be CURSOR1.

Usage

Using the .query() method will send the DISplay:WAVEView1:CURSor:CURSOR1:STATE? query.
Using the .verify(value) method will send the DISplay:WAVEView1:CURSor:CURSOR1:STATE? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:WAVEView1:CURSor:CURSOR1:STATE value command.

SCPI Syntax

- DISplay:WAVEView1:CURSor:CURSOR1:STATE {ON|OFF|<NR1>}
- DISplay:WAVEView1:CURSor:CURSOR1:STATE?

Info

<NR1> = 0 disables the specified cursor in the specified Waveform View; any other value turns this feature on.
OFF disables the specified cursor in the specified Waveform View.
ON enables the specified cursor in the specified Waveform View.

vbars `property` ¶

vbars: DisplayWaveview1CursorCursor1Vbars

Return the DISplay:WAVEView1:CURSor:CURSOR1:VBArs command tree.

Usage

Using the .query() method will send the DISplay:WAVEView1:CURSor:CURSOR1:VBArs? query.
Using the .verify(value) method will send the DISplay:WAVEView1:CURSor:CURSOR1:VBArs? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.aposition: The DISplay:WAVEView1:CURSor:CURSOR1:VBArs:APOSition command.
.bposition: The DISplay:WAVEView1:CURSor:CURSOR1:VBArs:BPOSition command.
.delta: The DISplay:WAVEView1:CURSor:CURSOR1:VBArs:DELTa command.
.units: The DISplay:WAVEView1:CURSor:CURSOR1:VBArs:UNIts command.

waveform `property` ¶

waveform: DisplayWaveview1CursorCursor1Waveform

Return the DISplay:WAVEView1:CURSor:CURSOR1:WAVEform command tree.

Usage

Using the .query() method will send the DISplay:WAVEView1:CURSor:CURSOR1:WAVEform? query.
Using the .verify(value) method will send the DISplay:WAVEView1:CURSor:CURSOR1:WAVEform? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.aposition: The DISplay:WAVEView1:CURSor:CURSOR1:WAVEform:APOSition command.
.bposition: The DISplay:WAVEView1:CURSor:CURSOR1:WAVEform:BPOSition command.

DisplayWaveview1CursorCursor1Asource ¶

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:WAVEView1:CURSor:CURSOR1:ASOUrce command.

Description

This command sets or queries the cursor A source of the specified cursor in the specified Waveform View. Note: 1 is the specified Waveform View and must be WAVEView1. Cursor is the specified cursor and must be CURSOR1.

Usage

Using the .query() method will send the DISplay:WAVEView1:CURSor:CURSOR1:ASOUrce? query.
Using the .verify(value) method will send the DISplay:WAVEView1:CURSor:CURSOR1:ASOUrce? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:WAVEView1:CURSor:CURSOR1:ASOUrce value command.

SCPI Syntax

- DISplay:WAVEView1:CURSor:CURSOR1:ASOUrce {AUTO|CH<x>|BUS<x>|MATH<x>|REF<x>|PLOT<x>}
- DISplay:WAVEView1:CURSor:CURSOR1:ASOUrce?

Info

AUTO specifies to use the selected source.
CH<x> specifies an analog channel as source.
MATH<x> specifies a math channel as source.
BUS<x> specifies a bus as source.
REF<x> specifies a reference waveform as the source.
PLOT<x> specifies a plot as the source.

DisplayWaveview1CursorCursor1Bsource ¶

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:WAVEView1:CURSor:CURSOR1:BSOUrce command.

Description

This command sets or queries the cursor B source of the specified cursor in the specified Waveform View. Note: 1 is the specified Waveform View and must be WAVEView1. Cursor is the specified cursor and must be CURSOR1.

Usage

Using the .query() method will send the DISplay:WAVEView1:CURSor:CURSOR1:BSOUrce? query.
Using the .verify(value) method will send the DISplay:WAVEView1:CURSor:CURSOR1:BSOUrce? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:WAVEView1:CURSor:CURSOR1:BSOUrce value command.

SCPI Syntax

- DISplay:WAVEView1:CURSor:CURSOR1:BSOUrce {CH<x>|BUS<x>|MATH<x>|REF<x>|PLOT<x>}
- DISplay:WAVEView1:CURSor:CURSOR1:BSOUrce?

Info

CH<x> specifies an analog channel as source.
MATH<x> specifies a math channel as source.
BUS<x> specifies a bus as source.
REF<x> specifies a reference waveform as the source.
PLOT<x> specifies a plot as the source.

DisplayWaveview1CursorCursor1Ddt ¶

Bases: SCPICmdRead

The DISplay:WAVEView1:CURSor:CURSOR1:DDT command.

Description

This query returns the delta V over delta T cursor readout value of the specified cursor in the specified Waveform View. Note: 1 is the specified Waveform View and must be WAVEView1. Cursor is the specified cursor and must be CURSOR1.

Usage

Using the .query() method will send the DISplay:WAVEView1:CURSor:CURSOR1:DDT? query.
Using the .verify(value) method will send the DISplay:WAVEView1:CURSor:CURSOR1:DDT? query and raise an AssertionError if the returned value does not match value.

SCPI Syntax

- DISplay:WAVEView1:CURSor:CURSOR1:DDT?

DisplayWaveview1CursorCursor1Function ¶

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:WAVEView1:CURSor:CURSOR1:FUNCtion command.

Description

This command sets or queries the cursor type of the specified cursor in the specified Waveform View. Note: 1 is the specified Waveform View and must be WAVEView1. Cursor is the specified cursor and must be CURSOR1.

Usage

Using the .query() method will send the DISplay:WAVEView1:CURSor:CURSOR1:FUNCtion? query.
Using the .verify(value) method will send the DISplay:WAVEView1:CURSor:CURSOR1:FUNCtion? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:WAVEView1:CURSor:CURSOR1:FUNCtion value command.

SCPI Syntax

- DISplay:WAVEView1:CURSor:CURSOR1:FUNCtion {SCREEN|WAVEFORM|VBArs|HBArs}
- DISplay:WAVEView1:CURSor:CURSOR1:FUNCtion?

Info

HBArs specifies horizontal bar cursors, which measure in vertical units.
VBArs specifies vertical bar cursors, which measure in horizontal units.
SCREEN specifies both horizontal and vertical bar cursors, which measure in horizontal and vertical units specified by the Cursor 1 and Cursor 2 Sources. Use these cursors to measure anywhere in the waveform display area.
WAVEFORM specifies paired or split cursors in YT display format for measuring waveform amplitude and time. In XY and XYZ format, these cursors indicate the amplitude positions of an XY pair (Ch1 vs Ch2 voltage, where Ch1 is the X axis and Ch2 is the Y axis) relative to the trigger.

DisplayWaveview1CursorCursor1Hbars ¶

Bases: SCPICmdRead

The DISplay:WAVEView1:CURSor:CURSOR1:HBArs command tree.

Usage

Using the .query() method will send the DISplay:WAVEView1:CURSor:CURSOR1:HBArs? query.
Using the .verify(value) method will send the DISplay:WAVEView1:CURSor:CURSOR1:HBArs? query and raise an AssertionError if the returned value does not match value.

Properties

.aposition: The DISplay:WAVEView1:CURSor:CURSOR1:HBArs:APOSition command.
.aunits: The DISplay:WAVEView1:CURSor:CURSOR1:HBArs:AUNIts command.
.bposition: The DISplay:WAVEView1:CURSor:CURSOR1:HBArs:BPOSition command.
.bunits: The DISplay:WAVEView1:CURSor:CURSOR1:HBArs:BUNIts command.
.delta: The DISplay:WAVEView1:CURSor:CURSOR1:HBArs:DELTa command.

aposition `property` ¶

aposition: DisplayWaveview1CursorCursor1HbarsAposition

Return the DISplay:WAVEView1:CURSor:CURSOR1:HBArs:APOSition command.

Description

Sets or queries the HBARs vertical A position of the specified cursor in the specified Waveform View. Note: 1 is the specified Waveform View and must be WAVEView1. Cursor is the specified cursor and must be CURSOR1.

Usage

Using the .query() method will send the DISplay:WAVEView1:CURSor:CURSOR1:HBArs:APOSition? query.
Using the .verify(value) method will send the DISplay:WAVEView1:CURSor:CURSOR1:HBArs:APOSition? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:WAVEView1:CURSor:CURSOR1:HBArs:APOSition value command.

SCPI Syntax

- DISplay:WAVEView1:CURSor:CURSOR1:HBArs:APOSition <NR3>
- DISplay:WAVEView1:CURSor:CURSOR1:HBArs:APOSition?

Info

<NR3> is the vertical cursor A position of the specified cursor in the specified Waveform View. 0.0 divisions is center, 5.0 top of the waveview, and -5.0 the bottom of the waveview.

aunits `property` ¶

aunits: DisplayWaveview1CursorCursor1HbarsAunits

Return the DISplay:WAVEView1:CURSor:CURSOR1:HBArs:AUNIts command.

Description

This command queries the cursor A vertical units of the specified cursor in the specified Waveform View. Note: 1 is the specified Waveform View and must be WAVEView1. Cursor is the specified cursor and must be CURSOR1.

Usage

Using the .query() method will send the DISplay:WAVEView1:CURSor:CURSOR1:HBArs:AUNIts? query.
Using the .verify(value) method will send the DISplay:WAVEView1:CURSor:CURSOR1:HBArs:AUNIts? query and raise an AssertionError if the returned value does not match value.

SCPI Syntax

- DISplay:WAVEView1:CURSor:CURSOR1:HBArs:AUNIts?

Info

<QString> is the cursor A vertical units of the specified cursor in the specified Waveform View.

bposition `property` ¶

bposition: DisplayWaveview1CursorCursor1HbarsBposition

Return the DISplay:WAVEView1:CURSor:CURSOR1:HBArs:BPOSition command.

Description

Sets or queries the HBARs vertical B position of the specified cursor in the specified Waveform View. Note: 1 is the specified Waveform View and must be WAVEView1. Cursor is the specified cursor and must be CURSOR1.

Usage

Using the .query() method will send the DISplay:WAVEView1:CURSor:CURSOR1:HBArs:BPOSition? query.
Using the .verify(value) method will send the DISplay:WAVEView1:CURSor:CURSOR1:HBArs:BPOSition? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:WAVEView1:CURSor:CURSOR1:HBArs:BPOSition value command.

SCPI Syntax

- DISplay:WAVEView1:CURSor:CURSOR1:HBArs:BPOSition <NR3>
- DISplay:WAVEView1:CURSor:CURSOR1:HBArs:BPOSition?

Info

<NR3> is the vertical cursor B position of the specified cursor in the specified Waveform View.

bunits `property` ¶

bunits: DisplayWaveview1CursorCursor1HbarsBunits

Return the DISplay:WAVEView1:CURSor:CURSOR1:HBArs:BUNIts command.

Description

This command queries the cursor B vertical units of the specified cursor in the specified Waveform View. Note: 1 is the specified Waveform View and must be WAVEView1. Cursor is the specified cursor and must be CURSOR1.

Usage

Using the .query() method will send the DISplay:WAVEView1:CURSor:CURSOR1:HBArs:BUNIts? query.
Using the .verify(value) method will send the DISplay:WAVEView1:CURSor:CURSOR1:HBArs:BUNIts? query and raise an AssertionError if the returned value does not match value.

SCPI Syntax

- DISplay:WAVEView1:CURSor:CURSOR1:HBArs:BUNIts?

delta `property` ¶

delta: DisplayWaveview1CursorCursor1HbarsDelta

Return the DISplay:WAVEView1:CURSor:CURSOR1:HBArs:DELTa command.

Description

This command queries the delta V cursor readout value of the specified cursor in the specified Waveform View. Note: 1 is the specified Waveform View and must be WAVEView1. Cursor is the specified cursor and must be CURSOR1.

Usage

Using the .query() method will send the DISplay:WAVEView1:CURSor:CURSOR1:HBArs:DELTa? query.
Using the .verify(value) method will send the DISplay:WAVEView1:CURSor:CURSOR1:HBArs:DELTa? query and raise an AssertionError if the returned value does not match value.

SCPI Syntax

- DISplay:WAVEView1:CURSor:CURSOR1:HBArs:DELTa?

DisplayWaveview1CursorCursor1HbarsAposition ¶

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:WAVEView1:CURSor:CURSOR1:HBArs:APOSition command.

Description

Sets or queries the HBARs vertical A position of the specified cursor in the specified Waveform View. Note: 1 is the specified Waveform View and must be WAVEView1. Cursor is the specified cursor and must be CURSOR1.

Usage

Using the .query() method will send the DISplay:WAVEView1:CURSor:CURSOR1:HBArs:APOSition? query.
Using the .verify(value) method will send the DISplay:WAVEView1:CURSor:CURSOR1:HBArs:APOSition? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:WAVEView1:CURSor:CURSOR1:HBArs:APOSition value command.

SCPI Syntax

- DISplay:WAVEView1:CURSor:CURSOR1:HBArs:APOSition <NR3>
- DISplay:WAVEView1:CURSor:CURSOR1:HBArs:APOSition?

Info

<NR3> is the vertical cursor A position of the specified cursor in the specified Waveform View. 0.0 divisions is center, 5.0 top of the waveview, and -5.0 the bottom of the waveview.

DisplayWaveview1CursorCursor1HbarsAunits ¶

Bases: SCPICmdRead

The DISplay:WAVEView1:CURSor:CURSOR1:HBArs:AUNIts command.

Description

This command queries the cursor A vertical units of the specified cursor in the specified Waveform View. Note: 1 is the specified Waveform View and must be WAVEView1. Cursor is the specified cursor and must be CURSOR1.

Usage

Using the .query() method will send the DISplay:WAVEView1:CURSor:CURSOR1:HBArs:AUNIts? query.
Using the .verify(value) method will send the DISplay:WAVEView1:CURSor:CURSOR1:HBArs:AUNIts? query and raise an AssertionError if the returned value does not match value.

SCPI Syntax

- DISplay:WAVEView1:CURSor:CURSOR1:HBArs:AUNIts?

Info

<QString> is the cursor A vertical units of the specified cursor in the specified Waveform View.

DisplayWaveview1CursorCursor1HbarsBposition ¶

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:WAVEView1:CURSor:CURSOR1:HBArs:BPOSition command.

Description

Sets or queries the HBARs vertical B position of the specified cursor in the specified Waveform View. Note: 1 is the specified Waveform View and must be WAVEView1. Cursor is the specified cursor and must be CURSOR1.

Usage

Using the .query() method will send the DISplay:WAVEView1:CURSor:CURSOR1:HBArs:BPOSition? query.
Using the .verify(value) method will send the DISplay:WAVEView1:CURSor:CURSOR1:HBArs:BPOSition? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:WAVEView1:CURSor:CURSOR1:HBArs:BPOSition value command.

SCPI Syntax

- DISplay:WAVEView1:CURSor:CURSOR1:HBArs:BPOSition <NR3>
- DISplay:WAVEView1:CURSor:CURSOR1:HBArs:BPOSition?

Info

<NR3> is the vertical cursor B position of the specified cursor in the specified Waveform View.

DisplayWaveview1CursorCursor1HbarsBunits ¶

Bases: SCPICmdRead

The DISplay:WAVEView1:CURSor:CURSOR1:HBArs:BUNIts command.

Description

This command queries the cursor B vertical units of the specified cursor in the specified Waveform View. Note: 1 is the specified Waveform View and must be WAVEView1. Cursor is the specified cursor and must be CURSOR1.

Usage

Using the .query() method will send the DISplay:WAVEView1:CURSor:CURSOR1:HBArs:BUNIts? query.
Using the .verify(value) method will send the DISplay:WAVEView1:CURSor:CURSOR1:HBArs:BUNIts? query and raise an AssertionError if the returned value does not match value.

SCPI Syntax

- DISplay:WAVEView1:CURSor:CURSOR1:HBArs:BUNIts?

DisplayWaveview1CursorCursor1HbarsDelta ¶

Bases: SCPICmdRead

The DISplay:WAVEView1:CURSor:CURSOR1:HBArs:DELTa command.

Description

This command queries the delta V cursor readout value of the specified cursor in the specified Waveform View. Note: 1 is the specified Waveform View and must be WAVEView1. Cursor is the specified cursor and must be CURSOR1.

Usage

Using the .query() method will send the DISplay:WAVEView1:CURSor:CURSOR1:HBArs:DELTa? query.
Using the .verify(value) method will send the DISplay:WAVEView1:CURSor:CURSOR1:HBArs:DELTa? query and raise an AssertionError if the returned value does not match value.

SCPI Syntax

- DISplay:WAVEView1:CURSor:CURSOR1:HBArs:DELTa?

DisplayWaveview1CursorCursor1Mode ¶

Bases: SCPICmdWrite

The DISplay:WAVEView1:CURSor:CURSOR1:MODe command.

Description

Sets or queries the cursor tracking mode of the specified cursor in the specified Waveform View. Note: 1 is the specified Waveform View and must be WAVEView1. Cursor is the specified cursor and must be CURSOR1.

Usage

Using the .write(value) method will send the DISplay:WAVEView1:CURSor:CURSOR1:MODe value command.

SCPI Syntax

- DISplay:WAVEView1:CURSor:CURSOR1:MODe {INDEPENDENT|TRACK}

Info

TRACK ties the navigational functionality of the two cursors together. For cursor 1 adjustments, this ties the movement of the two cursors together; however, cursor 2 continues to move independently of cursor 1.
INDEPENDENT allows independent adjustment of the two cursors.

DisplayWaveview1CursorCursor1Oneoverdeltatvalue ¶

Bases: SCPICmdRead

The DISplay:WAVEView1:CURSor:CURSOR1:ONEOVERDELTATVALUE command.

Description

This query returns the one over delta T cursor readout value of the specified cursor in the specified Waveform View. NOTE. 1 is the specified Waveform View and must be WAVEView1. Cursoris the specified cursor and must be CURSOR1.

Usage

Using the .query() method will send the DISplay:WAVEView1:CURSor:CURSOR1:ONEOVERDELTATVALUE? query.
Using the .verify(value) method will send the DISplay:WAVEView1:CURSor:CURSOR1:ONEOVERDELTATVALUE? query and raise an AssertionError if the returned value does not match value.

SCPI Syntax

- DISplay:WAVEView1:CURSor:CURSOR1:ONEOVERDELTATVALUE?

DisplayWaveview1CursorCursor1Screen ¶

Bases: SCPICmdRead

The DISplay:WAVEView1:CURSor:CURSOR1:SCREEN command tree.

Usage

Using the .query() method will send the DISplay:WAVEView1:CURSor:CURSOR1:SCREEN? query.
Using the .verify(value) method will send the DISplay:WAVEView1:CURSor:CURSOR1:SCREEN? query and raise an AssertionError if the returned value does not match value.

Properties

.axposition: The DISplay:WAVEView1:CURSor:CURSOR1:SCREEN:AXPOSition command.
.ayposition: The DISplay:WAVEView1:CURSor:CURSOR1:SCREEN:AYPOSition command.
.bxposition: The DISplay:WAVEView1:CURSor:CURSOR1:SCREEN:BXPOSition command.
.byposition: The DISplay:WAVEView1:CURSor:CURSOR1:SCREEN:BYPOSition command.

axposition `property` ¶

axposition: DisplayWaveview1CursorCursor1ScreenAxposition

Return the DISplay:WAVEView1:CURSor:CURSOR1:SCREEN:AXPOSition command.

Description

Sets or queries the horizontal cursor A position of the specified cursor in the specified Waveform View. Note: 1 is the specified Waveform View and must be WAVEView1. Cursor is the specified cursor and must be CURSOR1.

Usage

Using the .query() method will send the DISplay:WAVEView1:CURSor:CURSOR1:SCREEN:AXPOSition? query.
Using the .verify(value) method will send the DISplay:WAVEView1:CURSor:CURSOR1:SCREEN:AXPOSition? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:WAVEView1:CURSor:CURSOR1:SCREEN:AXPOSition value command.

SCPI Syntax

- DISplay:WAVEView1:CURSor:CURSOR1:SCREEN:AXPOSition <NR3>
- DISplay:WAVEView1:CURSor:CURSOR1:SCREEN:AXPOSition?

Info

<NR3> is the horizontal cursor A position of the specified cursor in the specified Waveform View.

ayposition `property` ¶

ayposition: DisplayWaveview1CursorCursor1ScreenAyposition

Return the DISplay:WAVEView1:CURSor:CURSOR1:SCREEN:AYPOSition command.

Description

This command sets or queries the vertical cursor A position of the specified cursor in the specified Waveform View. Note: 1 is the specified Waveform View and must be WAVEView1. Cursor is the specified cursor and must be CURSOR1.

Usage

Using the .query() method will send the DISplay:WAVEView1:CURSor:CURSOR1:SCREEN:AYPOSition? query.
Using the .verify(value) method will send the DISplay:WAVEView1:CURSor:CURSOR1:SCREEN:AYPOSition? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:WAVEView1:CURSor:CURSOR1:SCREEN:AYPOSition value command.

SCPI Syntax

- DISplay:WAVEView1:CURSor:CURSOR1:SCREEN:AYPOSition <NR3>
- DISplay:WAVEView1:CURSor:CURSOR1:SCREEN:AYPOSition?

Info

<NR3> the vertical cursor A position of the specified cursor in the specified Waveform View.

bxposition `property` ¶

bxposition: DisplayWaveview1CursorCursor1ScreenBxposition

Return the DISplay:WAVEView1:CURSor:CURSOR1:SCREEN:BXPOSition command.

Description

Sets or queries the horizontal cursor B position of the specified cursor in the specified Waveform View. Note: 1 is the specified Waveform View and must be WAVEView1. Cursor is the specified cursor and must be CURSOR1.

Usage

Using the .query() method will send the DISplay:WAVEView1:CURSor:CURSOR1:SCREEN:BXPOSition? query.
Using the .verify(value) method will send the DISplay:WAVEView1:CURSor:CURSOR1:SCREEN:BXPOSition? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:WAVEView1:CURSor:CURSOR1:SCREEN:BXPOSition value command.

SCPI Syntax

- DISplay:WAVEView1:CURSor:CURSOR1:SCREEN:BXPOSition <NR3>
- DISplay:WAVEView1:CURSor:CURSOR1:SCREEN:BXPOSition?

Info

<NR3> is the horizontal cursor B position of the specified cursor in the specified Waveform View.

byposition `property` ¶

byposition: DisplayWaveview1CursorCursor1ScreenByposition

Return the DISplay:WAVEView1:CURSor:CURSOR1:SCREEN:BYPOSition command.

Description

This command sets or queries the vertical cursor B position of the specified cursor in the specified Waveform View. Note: 1 is the specified Waveform View and must be WAVEView1. Cursor is the specified cursor and must be CURSOR1.

Usage

Using the .query() method will send the DISplay:WAVEView1:CURSor:CURSOR1:SCREEN:BYPOSition? query.
Using the .verify(value) method will send the DISplay:WAVEView1:CURSor:CURSOR1:SCREEN:BYPOSition? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:WAVEView1:CURSor:CURSOR1:SCREEN:BYPOSition value command.

SCPI Syntax

- DISplay:WAVEView1:CURSor:CURSOR1:SCREEN:BYPOSition <NR3>
- DISplay:WAVEView1:CURSor:CURSOR1:SCREEN:BYPOSition?

Info

<NR3> the vertical cursor B position of the specified cursor in the specified Waveform View.

DisplayWaveview1CursorCursor1ScreenAxposition ¶

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:WAVEView1:CURSor:CURSOR1:SCREEN:AXPOSition command.

Description

Sets or queries the horizontal cursor A position of the specified cursor in the specified Waveform View. Note: 1 is the specified Waveform View and must be WAVEView1. Cursor is the specified cursor and must be CURSOR1.

Usage

Using the .query() method will send the DISplay:WAVEView1:CURSor:CURSOR1:SCREEN:AXPOSition? query.
Using the .verify(value) method will send the DISplay:WAVEView1:CURSor:CURSOR1:SCREEN:AXPOSition? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:WAVEView1:CURSor:CURSOR1:SCREEN:AXPOSition value command.

SCPI Syntax

- DISplay:WAVEView1:CURSor:CURSOR1:SCREEN:AXPOSition <NR3>
- DISplay:WAVEView1:CURSor:CURSOR1:SCREEN:AXPOSition?

Info

<NR3> is the horizontal cursor A position of the specified cursor in the specified Waveform View.

DisplayWaveview1CursorCursor1ScreenAyposition ¶

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:WAVEView1:CURSor:CURSOR1:SCREEN:AYPOSition command.

Description

This command sets or queries the vertical cursor A position of the specified cursor in the specified Waveform View. Note: 1 is the specified Waveform View and must be WAVEView1. Cursor is the specified cursor and must be CURSOR1.

Usage

Using the .query() method will send the DISplay:WAVEView1:CURSor:CURSOR1:SCREEN:AYPOSition? query.
Using the .verify(value) method will send the DISplay:WAVEView1:CURSor:CURSOR1:SCREEN:AYPOSition? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:WAVEView1:CURSor:CURSOR1:SCREEN:AYPOSition value command.

SCPI Syntax

- DISplay:WAVEView1:CURSor:CURSOR1:SCREEN:AYPOSition <NR3>
- DISplay:WAVEView1:CURSor:CURSOR1:SCREEN:AYPOSition?

Info

<NR3> the vertical cursor A position of the specified cursor in the specified Waveform View.

DisplayWaveview1CursorCursor1ScreenBxposition ¶

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:WAVEView1:CURSor:CURSOR1:SCREEN:BXPOSition command.

Description

Sets or queries the horizontal cursor B position of the specified cursor in the specified Waveform View. Note: 1 is the specified Waveform View and must be WAVEView1. Cursor is the specified cursor and must be CURSOR1.

Usage

Using the .query() method will send the DISplay:WAVEView1:CURSor:CURSOR1:SCREEN:BXPOSition? query.
Using the .verify(value) method will send the DISplay:WAVEView1:CURSor:CURSOR1:SCREEN:BXPOSition? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:WAVEView1:CURSor:CURSOR1:SCREEN:BXPOSition value command.

SCPI Syntax

- DISplay:WAVEView1:CURSor:CURSOR1:SCREEN:BXPOSition <NR3>
- DISplay:WAVEView1:CURSor:CURSOR1:SCREEN:BXPOSition?

Info

<NR3> is the horizontal cursor B position of the specified cursor in the specified Waveform View.

DisplayWaveview1CursorCursor1ScreenByposition ¶

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:WAVEView1:CURSor:CURSOR1:SCREEN:BYPOSition command.

Description

This command sets or queries the vertical cursor B position of the specified cursor in the specified Waveform View. Note: 1 is the specified Waveform View and must be WAVEView1. Cursor is the specified cursor and must be CURSOR1.

Usage

Using the .query() method will send the DISplay:WAVEView1:CURSor:CURSOR1:SCREEN:BYPOSition? query.
Using the .verify(value) method will send the DISplay:WAVEView1:CURSor:CURSOR1:SCREEN:BYPOSition? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:WAVEView1:CURSor:CURSOR1:SCREEN:BYPOSition value command.

SCPI Syntax

- DISplay:WAVEView1:CURSor:CURSOR1:SCREEN:BYPOSition <NR3>
- DISplay:WAVEView1:CURSor:CURSOR1:SCREEN:BYPOSition?

Info

<NR3> the vertical cursor B position of the specified cursor in the specified Waveform View.

DisplayWaveview1CursorCursor1Splitmode ¶

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:WAVEView1:CURSor:CURSOR1:SPLITMODE command.

Description

This command sets or queries whether both cursors have the same or different sources. Note: 1 is the specified Waveform View and must be WAVEView1. Cursor is the specified cursor and must be CURSOR1.

Usage

Using the .query() method will send the DISplay:WAVEView1:CURSor:CURSOR1:SPLITMODE? query.
Using the .verify(value) method will send the DISplay:WAVEView1:CURSor:CURSOR1:SPLITMODE? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:WAVEView1:CURSor:CURSOR1:SPLITMODE value command.

SCPI Syntax

- DISplay:WAVEView1:CURSor:CURSOR1:SPLITMODE {SAME|SPLIT}
- DISplay:WAVEView1:CURSor:CURSOR1:SPLITMODE?

Info

SAME specifies both cursors have the same source.
SPLIT specifies the cursors have different sources.

DisplayWaveview1CursorCursor1State ¶

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:WAVEView1:CURSor:CURSOR1:STATE command.

Description

This command sets or queries the visible state of the specified cursor in the specified Waveform View. Note: 1 is the specified Waveform View and must be WAVEView1. Cursor is the specified cursor and must be CURSOR1.

Usage

Using the .query() method will send the DISplay:WAVEView1:CURSor:CURSOR1:STATE? query.
Using the .verify(value) method will send the DISplay:WAVEView1:CURSor:CURSOR1:STATE? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:WAVEView1:CURSor:CURSOR1:STATE value command.

SCPI Syntax

- DISplay:WAVEView1:CURSor:CURSOR1:STATE {ON|OFF|<NR1>}
- DISplay:WAVEView1:CURSor:CURSOR1:STATE?

Info

<NR1> = 0 disables the specified cursor in the specified Waveform View; any other value turns this feature on.
OFF disables the specified cursor in the specified Waveform View.
ON enables the specified cursor in the specified Waveform View.

DisplayWaveview1CursorCursor1Vbars ¶

Bases: SCPICmdRead

The DISplay:WAVEView1:CURSor:CURSOR1:VBArs command tree.

Usage

Using the .query() method will send the DISplay:WAVEView1:CURSor:CURSOR1:VBArs? query.
Using the .verify(value) method will send the DISplay:WAVEView1:CURSor:CURSOR1:VBArs? query and raise an AssertionError if the returned value does not match value.

Properties

.aposition: The DISplay:WAVEView1:CURSor:CURSOR1:VBArs:APOSition command.
.bposition: The DISplay:WAVEView1:CURSor:CURSOR1:VBArs:BPOSition command.
.delta: The DISplay:WAVEView1:CURSor:CURSOR1:VBArs:DELTa command.
.units: The DISplay:WAVEView1:CURSor:CURSOR1:VBArs:UNIts command.

aposition `property` ¶

aposition: DisplayWaveview1CursorCursor1VbarsAposition

Return the DISplay:WAVEView1:CURSor:CURSOR1:VBArs:APOSition command.

Description

This command sets or queries the cursor A horizontal position of the specified cursor in the specified Waveform View. Note: 1 is the specified Waveform View and must be WAVEView1. Cursor is the specified cursor and must be CURSOR1.

Usage

Using the .query() method will send the DISplay:WAVEView1:CURSor:CURSOR1:VBArs:APOSition? query.
Using the .verify(value) method will send the DISplay:WAVEView1:CURSor:CURSOR1:VBArs:APOSition? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:WAVEView1:CURSor:CURSOR1:VBArs:APOSition value command.

SCPI Syntax

- DISplay:WAVEView1:CURSor:CURSOR1:VBArs:APOSition <NR3>
- DISplay:WAVEView1:CURSor:CURSOR1:VBArs:APOSition?

Info

<NR3> is the horizontal cursor A position of the specified cursor in the specified Waveform View.

bposition `property` ¶

bposition: DisplayWaveview1CursorCursor1VbarsBposition

Return the DISplay:WAVEView1:CURSor:CURSOR1:VBArs:BPOSition command.

Description

This command sets or queries the cursor B horizontal position of the specified cursor in the specified Waveform View. Note: 1 is the specified Waveform View and must be WAVEView1. Cursor is the specified cursor and must be CURSOR1.

Usage

Using the .query() method will send the DISplay:WAVEView1:CURSor:CURSOR1:VBArs:BPOSition? query.
Using the .verify(value) method will send the DISplay:WAVEView1:CURSor:CURSOR1:VBArs:BPOSition? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:WAVEView1:CURSor:CURSOR1:VBArs:BPOSition value command.

SCPI Syntax

- DISplay:WAVEView1:CURSor:CURSOR1:VBArs:BPOSition <NR3>
- DISplay:WAVEView1:CURSor:CURSOR1:VBArs:BPOSition?

Info

<NR3> is the horizontal cursor B position of the specified cursor in the specified Waveform View.

delta `property` ¶

delta: DisplayWaveview1CursorCursor1VbarsDelta

Return the DISplay:WAVEView1:CURSor:CURSOR1:VBArs:DELTa command.

Description

This query sets or returns the delta T cursor readout value of the specified cursor in the specified Waveform View. Note: 1 is the specified Waveform View and must be WAVEView1. Cursor is the specified cursor and must be CURSOR1.

Usage

Using the .query() method will send the DISplay:WAVEView1:CURSor:CURSOR1:VBArs:DELTa? query.
Using the .verify(value) method will send the DISplay:WAVEView1:CURSor:CURSOR1:VBArs:DELTa? query and raise an AssertionError if the returned value does not match value.

SCPI Syntax

- DISplay:WAVEView1:CURSor:CURSOR1:VBArs:DELTa?

units `property` ¶

units: DisplayWaveview1CursorCursor1VbarsUnits

Return the DISplay:WAVEView1:CURSor:CURSOR1:VBArs:UNIts command.

Description

This query returns cursor A vertical units of the specified cursor in the specified Waveform View. Note: 1 is the specified Waveform View and must be WAVEView1. Cursor is the specified cursor and must be CURSOR1.

Usage

Using the .query() method will send the DISplay:WAVEView1:CURSor:CURSOR1:VBArs:UNIts? query.
Using the .verify(value) method will send the DISplay:WAVEView1:CURSor:CURSOR1:VBArs:UNIts? query and raise an AssertionError if the returned value does not match value.

SCPI Syntax

- DISplay:WAVEView1:CURSor:CURSOR1:VBArs:UNIts?

DisplayWaveview1CursorCursor1VbarsAposition ¶

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:WAVEView1:CURSor:CURSOR1:VBArs:APOSition command.

Description

This command sets or queries the cursor A horizontal position of the specified cursor in the specified Waveform View. Note: 1 is the specified Waveform View and must be WAVEView1. Cursor is the specified cursor and must be CURSOR1.

Usage

Using the .query() method will send the DISplay:WAVEView1:CURSor:CURSOR1:VBArs:APOSition? query.
Using the .verify(value) method will send the DISplay:WAVEView1:CURSor:CURSOR1:VBArs:APOSition? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:WAVEView1:CURSor:CURSOR1:VBArs:APOSition value command.

SCPI Syntax

- DISplay:WAVEView1:CURSor:CURSOR1:VBArs:APOSition <NR3>
- DISplay:WAVEView1:CURSor:CURSOR1:VBArs:APOSition?

Info

<NR3> is the horizontal cursor A position of the specified cursor in the specified Waveform View.

DisplayWaveview1CursorCursor1VbarsBposition ¶

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:WAVEView1:CURSor:CURSOR1:VBArs:BPOSition command.

Description

This command sets or queries the cursor B horizontal position of the specified cursor in the specified Waveform View. Note: 1 is the specified Waveform View and must be WAVEView1. Cursor is the specified cursor and must be CURSOR1.

Usage

Using the .query() method will send the DISplay:WAVEView1:CURSor:CURSOR1:VBArs:BPOSition? query.
Using the .verify(value) method will send the DISplay:WAVEView1:CURSor:CURSOR1:VBArs:BPOSition? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:WAVEView1:CURSor:CURSOR1:VBArs:BPOSition value command.

SCPI Syntax

- DISplay:WAVEView1:CURSor:CURSOR1:VBArs:BPOSition <NR3>
- DISplay:WAVEView1:CURSor:CURSOR1:VBArs:BPOSition?

Info

<NR3> is the horizontal cursor B position of the specified cursor in the specified Waveform View.

DisplayWaveview1CursorCursor1VbarsDelta ¶

Bases: SCPICmdRead

The DISplay:WAVEView1:CURSor:CURSOR1:VBArs:DELTa command.

Description

This query sets or returns the delta T cursor readout value of the specified cursor in the specified Waveform View. Note: 1 is the specified Waveform View and must be WAVEView1. Cursor is the specified cursor and must be CURSOR1.

Usage

Using the .query() method will send the DISplay:WAVEView1:CURSor:CURSOR1:VBArs:DELTa? query.
Using the .verify(value) method will send the DISplay:WAVEView1:CURSor:CURSOR1:VBArs:DELTa? query and raise an AssertionError if the returned value does not match value.

SCPI Syntax

- DISplay:WAVEView1:CURSor:CURSOR1:VBArs:DELTa?

DisplayWaveview1CursorCursor1VbarsUnits ¶

Bases: SCPICmdRead

The DISplay:WAVEView1:CURSor:CURSOR1:VBArs:UNIts command.

Description

This query returns cursor A vertical units of the specified cursor in the specified Waveform View. Note: 1 is the specified Waveform View and must be WAVEView1. Cursor is the specified cursor and must be CURSOR1.

Usage

Using the .query() method will send the DISplay:WAVEView1:CURSor:CURSOR1:VBArs:UNIts? query.
Using the .verify(value) method will send the DISplay:WAVEView1:CURSor:CURSOR1:VBArs:UNIts? query and raise an AssertionError if the returned value does not match value.

SCPI Syntax

- DISplay:WAVEView1:CURSor:CURSOR1:VBArs:UNIts?

DisplayWaveview1CursorCursor1Waveform ¶

Bases: SCPICmdRead

The DISplay:WAVEView1:CURSor:CURSOR1:WAVEform command tree.

Usage

Using the .query() method will send the DISplay:WAVEView1:CURSor:CURSOR1:WAVEform? query.
Using the .verify(value) method will send the DISplay:WAVEView1:CURSor:CURSOR1:WAVEform? query and raise an AssertionError if the returned value does not match value.

Properties

.aposition: The DISplay:WAVEView1:CURSor:CURSOR1:WAVEform:APOSition command.
.bposition: The DISplay:WAVEView1:CURSor:CURSOR1:WAVEform:BPOSition command.

aposition `property` ¶

aposition: DisplayWaveview1CursorCursor1WaveformAposition

Return the DISplay:WAVEView1:CURSor:CURSOR1:WAVEform:APOSition command.

Description

This command sets or queries the horizontal cursor A position of the specified cursor in the specified Waveform View. Note: 1 is the specified Waveform View and must be WAVEView1. Cursor is the specified cursor and must be CURSOR1.

Usage

Using the .query() method will send the DISplay:WAVEView1:CURSor:CURSOR1:WAVEform:APOSition? query.
Using the .verify(value) method will send the DISplay:WAVEView1:CURSor:CURSOR1:WAVEform:APOSition? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:WAVEView1:CURSor:CURSOR1:WAVEform:APOSition value command.

SCPI Syntax

- DISplay:WAVEView1:CURSor:CURSOR1:WAVEform:APOSition <NR3>
- DISplay:WAVEView1:CURSor:CURSOR1:WAVEform:APOSition?

Info

<NR3> is the horizontal cursor A position of the specified cursor in the specified Waveform View.

bposition `property` ¶

bposition: DisplayWaveview1CursorCursor1WaveformBposition

Return the DISplay:WAVEView1:CURSor:CURSOR1:WAVEform:BPOSition command.

Description

This command sets or queries the horizontal cursor B position of the specified cursor in the specified Waveform View. Note: 1 is the specified Waveform View and must be WAVEView1. Cursor is the specified cursor and must be CURSOR1.

Usage

Using the .query() method will send the DISplay:WAVEView1:CURSor:CURSOR1:WAVEform:BPOSition? query.
Using the .verify(value) method will send the DISplay:WAVEView1:CURSor:CURSOR1:WAVEform:BPOSition? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:WAVEView1:CURSor:CURSOR1:WAVEform:BPOSition value command.

SCPI Syntax

- DISplay:WAVEView1:CURSor:CURSOR1:WAVEform:BPOSition <NR3>
- DISplay:WAVEView1:CURSor:CURSOR1:WAVEform:BPOSition?

Info

<NR3> is the horizontal cursor B position of the specified cursor in the specified Waveform View.

DisplayWaveview1CursorCursor1WaveformAposition ¶

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:WAVEView1:CURSor:CURSOR1:WAVEform:APOSition command.

Description

This command sets or queries the horizontal cursor A position of the specified cursor in the specified Waveform View. Note: 1 is the specified Waveform View and must be WAVEView1. Cursor is the specified cursor and must be CURSOR1.

Usage

Using the .query() method will send the DISplay:WAVEView1:CURSor:CURSOR1:WAVEform:APOSition? query.
Using the .verify(value) method will send the DISplay:WAVEView1:CURSor:CURSOR1:WAVEform:APOSition? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:WAVEView1:CURSor:CURSOR1:WAVEform:APOSition value command.

SCPI Syntax

- DISplay:WAVEView1:CURSor:CURSOR1:WAVEform:APOSition <NR3>
- DISplay:WAVEView1:CURSor:CURSOR1:WAVEform:APOSition?

Info

<NR3> is the horizontal cursor A position of the specified cursor in the specified Waveform View.

DisplayWaveview1CursorCursor1WaveformBposition ¶

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:WAVEView1:CURSor:CURSOR1:WAVEform:BPOSition command.

Description

This command sets or queries the horizontal cursor B position of the specified cursor in the specified Waveform View. Note: 1 is the specified Waveform View and must be WAVEView1. Cursor is the specified cursor and must be CURSOR1.

Usage

Using the .query() method will send the DISplay:WAVEView1:CURSor:CURSOR1:WAVEform:BPOSition? query.
Using the .verify(value) method will send the DISplay:WAVEView1:CURSor:CURSOR1:WAVEform:BPOSition? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:WAVEView1:CURSor:CURSOR1:WAVEform:BPOSition value command.

SCPI Syntax

- DISplay:WAVEView1:CURSor:CURSOR1:WAVEform:BPOSition <NR3>
- DISplay:WAVEView1:CURSor:CURSOR1:WAVEform:BPOSition?

Info

<NR3> is the horizontal cursor B position of the specified cursor in the specified Waveform View.

DisplayWaveview1CursorCursorWaveform ¶

Bases: SCPICmdRead

The DISplay:WAVEView1:CURSor:CURSOR:WAVEform command tree.

Usage

Using the .query() method will send the DISplay:WAVEView1:CURSor:CURSOR:WAVEform? query.
Using the .verify(value) method will send the DISplay:WAVEView1:CURSor:CURSOR:WAVEform? query and raise an AssertionError if the returned value does not match value.

Properties

.all: The DISplay:WAVEView1:CURSor:CURSOR:WAVEform:ALL command tree.
.avposition: The DISplay:WAVEView1:CURSor:CURSOR:WAVEform:AVPOSition command.
.bvposition: The DISplay:WAVEView1:CURSor:CURSOR:WAVEform:BVPOSition command.

all `property` ¶

all: DisplayWaveview1CursorCursorWaveformAll

Return the DISplay:WAVEView1:CURSor:CURSOR:WAVEform:ALL command tree.

Usage

Using the .query() method will send the DISplay:WAVEView1:CURSor:CURSOR:WAVEform:ALL? query.
Using the .verify(value) method will send the DISplay:WAVEView1:CURSor:CURSOR:WAVEform:ALL? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.values: The DISplay:WAVEView1:CURSor:CURSOR:WAVEform:ALL:Values command.

avposition `property` ¶

avposition: DisplayWaveview1CursorCursorWaveformAvposition

Return the DISplay:WAVEView1:CURSor:CURSOR:WAVEform:AVPOSition command.

Description

This command queries the vertical waveform value at the cursor A position in the specified Waveform View. Note: 1 is the specified Waveform View and must be WAVEView1.

Usage

Using the .query() method will send the DISplay:WAVEView1:CURSor:CURSOR:WAVEform:AVPOSition? query.
Using the .verify(value) method will send the DISplay:WAVEView1:CURSor:CURSOR:WAVEform:AVPOSition? query and raise an AssertionError if the returned value does not match value.

SCPI Syntax

- DISplay:WAVEView1:CURSor:CURSOR:WAVEform:AVPOSition?

Info

<NR3> is the horizontal cursor A position of the specified cursor in the specified Waveform View.

bvposition `property` ¶

bvposition: DisplayWaveview1CursorCursorWaveformBvposition

Return the DISplay:WAVEView1:CURSor:CURSOR:WAVEform:BVPOSition command.

Description

This command queries the vertical waveform value at the cursor B position in the specified Waveform View. Note: 1 is the specified Waveform View and must be WAVEView1.

Usage

Using the .query() method will send the DISplay:WAVEView1:CURSor:CURSOR:WAVEform:BVPOSition? query.
Using the .verify(value) method will send the DISplay:WAVEView1:CURSor:CURSOR:WAVEform:BVPOSition? query and raise an AssertionError if the returned value does not match value.

SCPI Syntax

- DISplay:WAVEView1:CURSor:CURSOR:WAVEform:BVPOSition?

Info

<NR3> is the horizontal cursor A position of the specified cursor in the specified Waveform View.

DisplayWaveview1CursorCursorWaveformAll ¶

Bases: SCPICmdRead

The DISplay:WAVEView1:CURSor:CURSOR:WAVEform:ALL command tree.

Usage

Using the .query() method will send the DISplay:WAVEView1:CURSor:CURSOR:WAVEform:ALL? query.
Using the .verify(value) method will send the DISplay:WAVEView1:CURSor:CURSOR:WAVEform:ALL? query and raise an AssertionError if the returned value does not match value.

Properties

.values: The DISplay:WAVEView1:CURSor:CURSOR:WAVEform:ALL:Values command.

values `property` ¶

values: DisplayWaveview1CursorCursorWaveformAllValues

Return the DISplay:WAVEView1:CURSor:CURSOR:WAVEform:ALL:Values command.

Description

This query returns all values (Time, Voltage, Delta) associated with all the active sources in the Waveform View. Note: 1 is the specified Waveform View and must be WAVEView1.

Usage

Using the .query() method will send the DISplay:WAVEView1:CURSor:CURSOR:WAVEform:ALL:Values? query.
Using the .verify(value) method will send the DISplay:WAVEView1:CURSor:CURSOR:WAVEform:ALL:Values? query and raise an AssertionError if the returned value does not match value.

SCPI Syntax

- DISplay:WAVEView1:CURSor:CURSOR:WAVEform:ALL:Values?

DisplayWaveview1CursorCursorWaveformAllValues ¶

Bases: SCPICmdRead

The DISplay:WAVEView1:CURSor:CURSOR:WAVEform:ALL:Values command.

Description

This query returns all values (Time, Voltage, Delta) associated with all the active sources in the Waveform View. Note: 1 is the specified Waveform View and must be WAVEView1.

Usage

Using the .query() method will send the DISplay:WAVEView1:CURSor:CURSOR:WAVEform:ALL:Values? query.
Using the .verify(value) method will send the DISplay:WAVEView1:CURSor:CURSOR:WAVEform:ALL:Values? query and raise an AssertionError if the returned value does not match value.

SCPI Syntax

- DISplay:WAVEView1:CURSor:CURSOR:WAVEform:ALL:Values?

DisplayWaveview1CursorCursorWaveformAvposition ¶

Bases: SCPICmdRead

The DISplay:WAVEView1:CURSor:CURSOR:WAVEform:AVPOSition command.

Description

This command queries the vertical waveform value at the cursor A position in the specified Waveform View. Note: 1 is the specified Waveform View and must be WAVEView1.

Usage

Using the .query() method will send the DISplay:WAVEView1:CURSor:CURSOR:WAVEform:AVPOSition? query.
Using the .verify(value) method will send the DISplay:WAVEView1:CURSor:CURSOR:WAVEform:AVPOSition? query and raise an AssertionError if the returned value does not match value.

SCPI Syntax

- DISplay:WAVEView1:CURSor:CURSOR:WAVEform:AVPOSition?

Info

<NR3> is the horizontal cursor A position of the specified cursor in the specified Waveform View.

DisplayWaveview1CursorCursorWaveformBvposition ¶

Bases: SCPICmdRead

The DISplay:WAVEView1:CURSor:CURSOR:WAVEform:BVPOSition command.

Description

This command queries the vertical waveform value at the cursor B position in the specified Waveform View. Note: 1 is the specified Waveform View and must be WAVEView1.

Usage

Using the .query() method will send the DISplay:WAVEView1:CURSor:CURSOR:WAVEform:BVPOSition? query.
Using the .verify(value) method will send the DISplay:WAVEView1:CURSor:CURSOR:WAVEform:BVPOSition? query and raise an AssertionError if the returned value does not match value.

SCPI Syntax

- DISplay:WAVEView1:CURSor:CURSOR:WAVEform:BVPOSition?

Info

<NR3> is the horizontal cursor A position of the specified cursor in the specified Waveform View.

DisplayWaveview1Filter ¶

Bases: SCPICmdWrite

The DISplay:WAVEView1:FILTer command.

Description

This command sets or queries the type of interpolation filter for the display. Note: 1 is the specified Waveform View and must be WAVEView1.

Usage

Using the .write(value) method will send the DISplay:WAVEView1:FILTer value command.

SCPI Syntax

- DISplay:WAVEView1:FILTer {SINX|LINear}

Info

LINear specifies linear interpolation, where acquired points are connected with straight lines.
SINX specifies sin(x)/x interpolation, where acquired points are fit to a curve.

DisplayWaveview1Graticule ¶

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:WAVEView1:GRAticule command.

Description

This command selects or queries the type of graticule that is displayed. Note: 1 is the specified Waveform View and must be WAVEView1.

Usage

Using the .query() method will send the DISplay:WAVEView1:GRAticule? query.
Using the .verify(value) method will send the DISplay:WAVEView1:GRAticule? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:WAVEView1:GRAticule value command.

SCPI Syntax

- DISplay:WAVEView1:GRAticule {GRId|TIMe|FULl|NONe}
- DISplay:WAVEView1:GRAticule?

Info

GRId specifies a frame and grid only.
TIMe specifies a time graticule only.
FULl specifies a frame, a grid and cross hairs.
NONe specified no graticule.

DisplayWaveview1Intensity ¶

Bases: SCPICmdRead

The DISplay:WAVEView1:INTENSITy command tree.

Usage

Using the .query() method will send the DISplay:WAVEView1:INTENSITy? query.
Using the .verify(value) method will send the DISplay:WAVEView1:INTENSITy? query and raise an AssertionError if the returned value does not match value.

Properties

.graticule: The DISplay:WAVEView1:INTENSITy:GRATicule command.
.waveform: The DISplay:WAVEView1:INTENSITy:WAVEform command.

graticule `property` ¶

graticule: DisplayWaveview1IntensityGraticule

Return the DISplay:WAVEView1:INTENSITy:GRATicule command.

Description

This command sets or queries the graticule saturation level. Note: 1 is the specified Waveform View and must be WAVEView1.

Usage

Using the .query() method will send the DISplay:WAVEView1:INTENSITy:GRATicule? query.
Using the .verify(value) method will send the DISplay:WAVEView1:INTENSITy:GRATicule? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:WAVEView1:INTENSITy:GRATicule value command.

SCPI Syntax

- DISplay:WAVEView1:INTENSITy:GRATicule <NR2>
- DISplay:WAVEView1:INTENSITy:GRATicule?

Info

<NR2> is the graticule saturation level.

waveform `property` ¶

waveform: DisplayWaveview1IntensityWaveform

Return the DISplay:WAVEView1:INTENSITy:WAVEform command.

Description

This command sets or queries the waveform saturation level. Note: 1 is the specified Waveform View and must be WAVEView1.

Usage

Using the .query() method will send the DISplay:WAVEView1:INTENSITy:WAVEform? query.
Using the .verify(value) method will send the DISplay:WAVEView1:INTENSITy:WAVEform? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:WAVEView1:INTENSITy:WAVEform value command.

SCPI Syntax

- DISplay:WAVEView1:INTENSITy:WAVEform <NR2>
- DISplay:WAVEView1:INTENSITy:WAVEform?

Info

<NR2> is the waveform saturation level.

DisplayWaveview1IntensityGraticule ¶

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:WAVEView1:INTENSITy:GRATicule command.

Description

This command sets or queries the graticule saturation level. Note: 1 is the specified Waveform View and must be WAVEView1.

Usage

Using the .query() method will send the DISplay:WAVEView1:INTENSITy:GRATicule? query.
Using the .verify(value) method will send the DISplay:WAVEView1:INTENSITy:GRATicule? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:WAVEView1:INTENSITy:GRATicule value command.

SCPI Syntax

- DISplay:WAVEView1:INTENSITy:GRATicule <NR2>
- DISplay:WAVEView1:INTENSITy:GRATicule?

Info

<NR2> is the graticule saturation level.

DisplayWaveview1IntensityWaveform ¶

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:WAVEView1:INTENSITy:WAVEform command.

Description

This command sets or queries the waveform saturation level. Note: 1 is the specified Waveform View and must be WAVEView1.

Usage

Using the .query() method will send the DISplay:WAVEView1:INTENSITy:WAVEform? query.
Using the .verify(value) method will send the DISplay:WAVEView1:INTENSITy:WAVEform? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:WAVEView1:INTENSITy:WAVEform value command.

SCPI Syntax

- DISplay:WAVEView1:INTENSITy:WAVEform <NR2>
- DISplay:WAVEView1:INTENSITy:WAVEform?

Info

<NR2> is the waveform saturation level.

DisplayWaveview1Math ¶

Bases: SCPICmdRead

The DISplay:WAVEView1:MATH command tree.

Usage

Using the .query() method will send the DISplay:WAVEView1:MATH? query.
Using the .verify(value) method will send the DISplay:WAVEView1:MATH? query and raise an AssertionError if the returned value does not match value.

Properties

.math: The DISplay:WAVEView1:MATH:MATH<x> command tree.

math `property` ¶

math: dict[int, DisplayWaveview1MathMathItem]

Return the DISplay:WAVEView1:MATH:MATH<x> command tree.

Usage

Using the .query() method will send the DISplay:WAVEView1:MATH:MATH<x>? query.
Using the .verify(value) method will send the DISplay:WAVEView1:MATH:MATH<x>? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.autoscale: The DISplay:WAVEView1:MATH:MATH<x>:AUTOScale command.
.state: The DISplay:WAVEView1:MATH:MATH<x>:STATE command.
.vertical: The DISplay:WAVEView1:MATH:MATH<x>:VERTical command tree.

DisplayWaveview1MathMathItem ¶

Bases: ValidatedDynamicNumberCmd, SCPICmdRead

The DISplay:WAVEView1:MATH:MATH<x> command tree.

Usage

Using the .query() method will send the DISplay:WAVEView1:MATH:MATH<x>? query.
Using the .verify(value) method will send the DISplay:WAVEView1:MATH:MATH<x>? query and raise an AssertionError if the returned value does not match value.

Properties

.autoscale: The DISplay:WAVEView1:MATH:MATH<x>:AUTOScale command.
.state: The DISplay:WAVEView1:MATH:MATH<x>:STATE command.
.vertical: The DISplay:WAVEView1:MATH:MATH<x>:VERTical command tree.

autoscale `property` ¶

autoscale: DisplayWaveview1MathMathItemAutoscale

Return the DISplay:WAVEView1:MATH:MATH<x>:AUTOScale command.

Description

This command sets or queries whether the specified math gets auto-scaled when the math equation changes within the specified Waveform View.

Usage

Using the .query() method will send the DISplay:WAVEView1:MATH:MATH<x>:AUTOScale? query.
Using the .verify(value) method will send the DISplay:WAVEView1:MATH:MATH<x>:AUTOScale? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:WAVEView1:MATH:MATH<x>:AUTOScale value command.

SCPI Syntax

- DISplay:WAVEView1:MATH:MATH<x>:AUTOScale {ON|OFF|<NR1>}
- DISplay:WAVEView1:MATH:MATH<x>:AUTOScale?

Info

<NR1> = 0 disables the autoscaling the math in the specified Waveform View; any other value turns this feature on.
OFF disables the autoscaling the math in the specified Waveform View.
ON enables the autoscaling the math in the specified Waveform View.

state `property` ¶

state: DisplayWaveview1MathMathItemState

Return the DISplay:WAVEView1:MATH:MATH<x>:STATE command.

Description

This command sets or queries the state of the specified math waveform in the specified Waveform View. Note: 1 is the specified Waveform View and must be WAVEView1.

Usage

Using the .query() method will send the DISplay:WAVEView1:MATH:MATH<x>:STATE? query.
Using the .verify(value) method will send the DISplay:WAVEView1:MATH:MATH<x>:STATE? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:WAVEView1:MATH:MATH<x>:STATE value command.

SCPI Syntax

- DISplay:WAVEView1:MATH:MATH<x>:STATE {ON|OFF|<NR1>}
- DISplay:WAVEView1:MATH:MATH<x>:STATE?

Info

<NR1> = 0 disables the specified math in the specified Waveform View; any other value turns this feature on.
OFF disables the specified math in the specified Waveform View.
ON enables the specified math in the specified Waveform View.

vertical `property` ¶

vertical: DisplayWaveview1MathMathItemVertical

Return the DISplay:WAVEView1:MATH:MATH<x>:VERTical command tree.

Usage

Using the .query() method will send the DISplay:WAVEView1:MATH:MATH<x>:VERTical? query.
Using the .verify(value) method will send the DISplay:WAVEView1:MATH:MATH<x>:VERTical? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.position: The DISplay:WAVEView1:MATH:MATH<x>:VERTical:POSition command.
.scale: The DISplay:WAVEView1:MATH:MATH<x>:VERTical:SCAle command.

DisplayWaveview1MathMathItemAutoscale ¶

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:WAVEView1:MATH:MATH<x>:AUTOScale command.

Description

This command sets or queries whether the specified math gets auto-scaled when the math equation changes within the specified Waveform View.

Usage

Using the .query() method will send the DISplay:WAVEView1:MATH:MATH<x>:AUTOScale? query.
Using the .verify(value) method will send the DISplay:WAVEView1:MATH:MATH<x>:AUTOScale? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:WAVEView1:MATH:MATH<x>:AUTOScale value command.

SCPI Syntax

- DISplay:WAVEView1:MATH:MATH<x>:AUTOScale {ON|OFF|<NR1>}
- DISplay:WAVEView1:MATH:MATH<x>:AUTOScale?

Info

<NR1> = 0 disables the autoscaling the math in the specified Waveform View; any other value turns this feature on.
OFF disables the autoscaling the math in the specified Waveform View.
ON enables the autoscaling the math in the specified Waveform View.

DisplayWaveview1MathMathItemState ¶

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:WAVEView1:MATH:MATH<x>:STATE command.

Description

This command sets or queries the state of the specified math waveform in the specified Waveform View. Note: 1 is the specified Waveform View and must be WAVEView1.

Usage

Using the .query() method will send the DISplay:WAVEView1:MATH:MATH<x>:STATE? query.
Using the .verify(value) method will send the DISplay:WAVEView1:MATH:MATH<x>:STATE? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:WAVEView1:MATH:MATH<x>:STATE value command.

SCPI Syntax

- DISplay:WAVEView1:MATH:MATH<x>:STATE {ON|OFF|<NR1>}
- DISplay:WAVEView1:MATH:MATH<x>:STATE?

Info

<NR1> = 0 disables the specified math in the specified Waveform View; any other value turns this feature on.
OFF disables the specified math in the specified Waveform View.
ON enables the specified math in the specified Waveform View.

DisplayWaveview1MathMathItemVertical ¶

Bases: SCPICmdRead

The DISplay:WAVEView1:MATH:MATH<x>:VERTical command tree.

Usage

Using the .query() method will send the DISplay:WAVEView1:MATH:MATH<x>:VERTical? query.
Using the .verify(value) method will send the DISplay:WAVEView1:MATH:MATH<x>:VERTical? query and raise an AssertionError if the returned value does not match value.

Properties

.position: The DISplay:WAVEView1:MATH:MATH<x>:VERTical:POSition command.
.scale: The DISplay:WAVEView1:MATH:MATH<x>:VERTical:SCAle command.

position `property` ¶

position: DisplayWaveview1MathMathItemVerticalPosition

Return the DISplay:WAVEView1:MATH:MATH<x>:VERTical:POSition command.

Description

This command sets or queries the vertical position in divisions of the specified math waveform in the specified Waveform View. Note: 1 is the specified Waveform View and must be WAVEView1.

Usage

Using the .query() method will send the DISplay:WAVEView1:MATH:MATH<x>:VERTical:POSition? query.
Using the .verify(value) method will send the DISplay:WAVEView1:MATH:MATH<x>:VERTical:POSition? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:WAVEView1:MATH:MATH<x>:VERTical:POSition value command.

SCPI Syntax

- DISplay:WAVEView1:MATH:MATH<x>:VERTical:POSition <NR3>
- DISplay:WAVEView1:MATH:MATH<x>:VERTical:POSition?

Info

<NR3> is the vertical position in divisions of the specified math waveform.

scale `property` ¶

scale: DisplayWaveview1MathMathItemVerticalScale

Return the DISplay:WAVEView1:MATH:MATH<x>:VERTical:SCAle command.

Description

Sets or queries the vertical scale of the specified math in volts per division within the specified Waveform View. Note: 1 is the specified Waveform View and must be WAVEView1.

Usage

Using the .query() method will send the DISplay:WAVEView1:MATH:MATH<x>:VERTical:SCAle? query.
Using the .verify(value) method will send the DISplay:WAVEView1:MATH:MATH<x>:VERTical:SCAle? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:WAVEView1:MATH:MATH<x>:VERTical:SCAle value command.

SCPI Syntax

- DISplay:WAVEView1:MATH:MATH<x>:VERTical:SCAle <NR3>
- DISplay:WAVEView1:MATH:MATH<x>:VERTical:SCAle?

Info

<NR3> is the vertical scale of the specified math waveform.

DisplayWaveview1MathMathItemVerticalPosition ¶

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:WAVEView1:MATH:MATH<x>:VERTical:POSition command.

Description

This command sets or queries the vertical position in divisions of the specified math waveform in the specified Waveform View. Note: 1 is the specified Waveform View and must be WAVEView1.

Usage

Using the .query() method will send the DISplay:WAVEView1:MATH:MATH<x>:VERTical:POSition? query.
Using the .verify(value) method will send the DISplay:WAVEView1:MATH:MATH<x>:VERTical:POSition? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:WAVEView1:MATH:MATH<x>:VERTical:POSition value command.

SCPI Syntax

- DISplay:WAVEView1:MATH:MATH<x>:VERTical:POSition <NR3>
- DISplay:WAVEView1:MATH:MATH<x>:VERTical:POSition?

Info

<NR3> is the vertical position in divisions of the specified math waveform.

DisplayWaveview1MathMathItemVerticalScale ¶

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:WAVEView1:MATH:MATH<x>:VERTical:SCAle command.

Description

Sets or queries the vertical scale of the specified math in volts per division within the specified Waveform View. Note: 1 is the specified Waveform View and must be WAVEView1.

Usage

Using the .query() method will send the DISplay:WAVEView1:MATH:MATH<x>:VERTical:SCAle? query.
Using the .verify(value) method will send the DISplay:WAVEView1:MATH:MATH<x>:VERTical:SCAle? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:WAVEView1:MATH:MATH<x>:VERTical:SCAle value command.

SCPI Syntax

- DISplay:WAVEView1:MATH:MATH<x>:VERTical:SCAle <NR3>
- DISplay:WAVEView1:MATH:MATH<x>:VERTical:SCAle?

Info

<NR3> is the vertical scale of the specified math waveform.

DisplayWaveview1Plot ¶

Bases: SCPICmdRead

The DISplay:WAVEView1:PLOT command tree.

Usage

Using the .query() method will send the DISplay:WAVEView1:PLOT? query.
Using the .verify(value) method will send the DISplay:WAVEView1:PLOT? query and raise an AssertionError if the returned value does not match value.

Properties

.plot: The DISplay:WAVEView1:PLOT:PLOT<x> command tree.

plot `property` ¶

plot: dict[int, DisplayWaveview1PlotPlotItem]

Return the DISplay:WAVEView1:PLOT:PLOT<x> command tree.

Usage

Using the .query() method will send the DISplay:WAVEView1:PLOT:PLOT<x>? query.
Using the .verify(value) method will send the DISplay:WAVEView1:PLOT:PLOT<x>? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.autoscale: The DISplay:WAVEView1:PLOT:PLOT<x>:AUTOScale command.
.state: The DISplay:WAVEView1:PLOT:PLOT<x>:STATE command.
.vertical: The DISplay:WAVEView1:PLOT:PLOT<x>:VERTical command tree.

DisplayWaveview1PlotPlotItem ¶

Bases: ValidatedDynamicNumberCmd, SCPICmdRead

The DISplay:WAVEView1:PLOT:PLOT<x> command tree.

Usage

Using the .query() method will send the DISplay:WAVEView1:PLOT:PLOT<x>? query.
Using the .verify(value) method will send the DISplay:WAVEView1:PLOT:PLOT<x>? query and raise an AssertionError if the returned value does not match value.

Properties

.autoscale: The DISplay:WAVEView1:PLOT:PLOT<x>:AUTOScale command.
.state: The DISplay:WAVEView1:PLOT:PLOT<x>:STATE command.
.vertical: The DISplay:WAVEView1:PLOT:PLOT<x>:VERTical command tree.

autoscale `property` ¶

autoscale: DisplayWaveview1PlotPlotItemAutoscale

Return the DISplay:WAVEView1:PLOT:PLOT<x>:AUTOScale command.

Description

This command sets or queries whether the specified trend gets auto-scaled when the new data is available within the specified Waveform View.

Usage

Using the .query() method will send the DISplay:WAVEView1:PLOT:PLOT<x>:AUTOScale? query.
Using the .verify(value) method will send the DISplay:WAVEView1:PLOT:PLOT<x>:AUTOScale? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:WAVEView1:PLOT:PLOT<x>:AUTOScale value command.

SCPI Syntax

- DISplay:WAVEView1:PLOT:PLOT<x>:AUTOScale {ON|OFF|<NR1>}
- DISplay:WAVEView1:PLOT:PLOT<x>:AUTOScale?

Info

<NR1> = 0 disables auto-scaling the specified plot in the specified Waveform View; any other value turns this feature on.
OFF disables auto-scaling the specified plot in the specified Waveform View.
ON enables auto-scaling the specified plot in the specified Waveform View.

state `property` ¶

state: DisplayWaveview1PlotPlotItemState

Return the DISplay:WAVEView1:PLOT:PLOT<x>:STATE command.

Description

This command sets or queries the state of the specified time trend plot waveform in the specified Waveform View.

Usage

Using the .query() method will send the DISplay:WAVEView1:PLOT:PLOT<x>:STATE? query.
Using the .verify(value) method will send the DISplay:WAVEView1:PLOT:PLOT<x>:STATE? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:WAVEView1:PLOT:PLOT<x>:STATE value command.

SCPI Syntax

- DISplay:WAVEView1:PLOT:PLOT<x>:STATE {ON|OFF|<NR1>}
- DISplay:WAVEView1:PLOT:PLOT<x>:STATE?

Info

<NR1> = 0 disables the specified plot in the specified Waveform View; any other value turns this feature on.
OFF disables the specified plot in the specified Waveform View.
ON enables the specified plot in the specified Waveform View.

vertical `property` ¶

vertical: DisplayWaveview1PlotPlotItemVertical

Return the DISplay:WAVEView1:PLOT:PLOT<x>:VERTical command tree.

Usage

Using the .query() method will send the DISplay:WAVEView1:PLOT:PLOT<x>:VERTical? query.
Using the .verify(value) method will send the DISplay:WAVEView1:PLOT:PLOT<x>:VERTical? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.position: The DISplay:WAVEView1:PLOT:PLOT<x>:VERTical:POSition command.
.scale: The DISplay:WAVEView1:PLOT:PLOT<x>:VERTical:SCAle command.

DisplayWaveview1PlotPlotItemAutoscale ¶

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:WAVEView1:PLOT:PLOT<x>:AUTOScale command.

Description

This command sets or queries whether the specified trend gets auto-scaled when the new data is available within the specified Waveform View.

Usage

Using the .query() method will send the DISplay:WAVEView1:PLOT:PLOT<x>:AUTOScale? query.
Using the .verify(value) method will send the DISplay:WAVEView1:PLOT:PLOT<x>:AUTOScale? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:WAVEView1:PLOT:PLOT<x>:AUTOScale value command.

SCPI Syntax

- DISplay:WAVEView1:PLOT:PLOT<x>:AUTOScale {ON|OFF|<NR1>}
- DISplay:WAVEView1:PLOT:PLOT<x>:AUTOScale?

Info

<NR1> = 0 disables auto-scaling the specified plot in the specified Waveform View; any other value turns this feature on.
OFF disables auto-scaling the specified plot in the specified Waveform View.
ON enables auto-scaling the specified plot in the specified Waveform View.

DisplayWaveview1PlotPlotItemState ¶

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:WAVEView1:PLOT:PLOT<x>:STATE command.

Description

This command sets or queries the state of the specified time trend plot waveform in the specified Waveform View.

Usage

Using the .query() method will send the DISplay:WAVEView1:PLOT:PLOT<x>:STATE? query.
Using the .verify(value) method will send the DISplay:WAVEView1:PLOT:PLOT<x>:STATE? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:WAVEView1:PLOT:PLOT<x>:STATE value command.

SCPI Syntax

- DISplay:WAVEView1:PLOT:PLOT<x>:STATE {ON|OFF|<NR1>}
- DISplay:WAVEView1:PLOT:PLOT<x>:STATE?

Info

<NR1> = 0 disables the specified plot in the specified Waveform View; any other value turns this feature on.
OFF disables the specified plot in the specified Waveform View.
ON enables the specified plot in the specified Waveform View.

DisplayWaveview1PlotPlotItemVertical ¶

Bases: SCPICmdRead

The DISplay:WAVEView1:PLOT:PLOT<x>:VERTical command tree.

Usage

Using the .query() method will send the DISplay:WAVEView1:PLOT:PLOT<x>:VERTical? query.
Using the .verify(value) method will send the DISplay:WAVEView1:PLOT:PLOT<x>:VERTical? query and raise an AssertionError if the returned value does not match value.

Properties

.position: The DISplay:WAVEView1:PLOT:PLOT<x>:VERTical:POSition command.
.scale: The DISplay:WAVEView1:PLOT:PLOT<x>:VERTical:SCAle command.

position `property` ¶

position: DisplayWaveview1PlotPlotItemVerticalPosition

Return the DISplay:WAVEView1:PLOT:PLOT<x>:VERTical:POSition command.

Description

This command sets or queries the vertical position of the specified time trend in the specified Waveform View in absolute units.

Usage

Using the .query() method will send the DISplay:WAVEView1:PLOT:PLOT<x>:VERTical:POSition? query.
Using the .verify(value) method will send the DISplay:WAVEView1:PLOT:PLOT<x>:VERTical:POSition? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:WAVEView1:PLOT:PLOT<x>:VERTical:POSition value command.

SCPI Syntax

- DISplay:WAVEView1:PLOT:PLOT<x>:VERTical:POSition <NR3>
- DISplay:WAVEView1:PLOT:PLOT<x>:VERTical:POSition?

Info

<NR3> is the vertical position.

scale `property` ¶

scale: DisplayWaveview1PlotPlotItemVerticalScale

Return the DISplay:WAVEView1:PLOT:PLOT<x>:VERTical:SCAle command.

Description

This command sets or queries the vertical scale of the specified time trend in units per division in the specified Waveform View.

Usage

Using the .query() method will send the DISplay:WAVEView1:PLOT:PLOT<x>:VERTical:SCAle? query.
Using the .verify(value) method will send the DISplay:WAVEView1:PLOT:PLOT<x>:VERTical:SCAle? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:WAVEView1:PLOT:PLOT<x>:VERTical:SCAle value command.

SCPI Syntax

- DISplay:WAVEView1:PLOT:PLOT<x>:VERTical:SCAle <NR3>
- DISplay:WAVEView1:PLOT:PLOT<x>:VERTical:SCAle?

Info

<NR3> is the vertical scale.

DisplayWaveview1PlotPlotItemVerticalPosition ¶

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:WAVEView1:PLOT:PLOT<x>:VERTical:POSition command.

Description

This command sets or queries the vertical position of the specified time trend in the specified Waveform View in absolute units.

Usage

Using the .query() method will send the DISplay:WAVEView1:PLOT:PLOT<x>:VERTical:POSition? query.
Using the .verify(value) method will send the DISplay:WAVEView1:PLOT:PLOT<x>:VERTical:POSition? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:WAVEView1:PLOT:PLOT<x>:VERTical:POSition value command.

SCPI Syntax

- DISplay:WAVEView1:PLOT:PLOT<x>:VERTical:POSition <NR3>
- DISplay:WAVEView1:PLOT:PLOT<x>:VERTical:POSition?

Info

<NR3> is the vertical position.

DisplayWaveview1PlotPlotItemVerticalScale ¶

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:WAVEView1:PLOT:PLOT<x>:VERTical:SCAle command.

Description

This command sets or queries the vertical scale of the specified time trend in units per division in the specified Waveform View.

Usage

Using the .query() method will send the DISplay:WAVEView1:PLOT:PLOT<x>:VERTical:SCAle? query.
Using the .verify(value) method will send the DISplay:WAVEView1:PLOT:PLOT<x>:VERTical:SCAle? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:WAVEView1:PLOT:PLOT<x>:VERTical:SCAle value command.

SCPI Syntax

- DISplay:WAVEView1:PLOT:PLOT<x>:VERTical:SCAle <NR3>
- DISplay:WAVEView1:PLOT:PLOT<x>:VERTical:SCAle?

Info

<NR3> is the vertical scale.

DisplayWaveview1Ref ¶

Bases: SCPICmdRead

The DISplay:WAVEView1:REF command tree.

Usage

Using the .query() method will send the DISplay:WAVEView1:REF? query.
Using the .verify(value) method will send the DISplay:WAVEView1:REF? query and raise an AssertionError if the returned value does not match value.

Properties

.ref: The DISplay:WAVEView1:REF:REF<x> command tree.

ref `property` ¶

ref: dict[int, DisplayWaveview1RefRefItem]

Return the DISplay:WAVEView1:REF:REF<x> command tree.

Usage

Using the .query() method will send the DISplay:WAVEView1:REF:REF<x>? query.
Using the .verify(value) method will send the DISplay:WAVEView1:REF:REF<x>? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.state: The DISplay:WAVEView1:REF:REF<x>:STATE command.
.vertical: The DISplay:WAVEView1:REF:REF<x>:VERTical command tree.
.frame: The DISplay:WAVEView1:REF:REF<x>:FRAMe command.

DisplayWaveview1RefItem ¶

Bases: ValidatedDynamicNumberCmd, SCPICmdRead

The DISplay:WAVEView1:REF<x> command tree.

Usage

Using the .query() method will send the DISplay:WAVEView1:REF<x>? query.
Using the .verify(value) method will send the DISplay:WAVEView1:REF<x>? query and raise an AssertionError if the returned value does not match value.

Properties

.dall: The DISplay:WAVEView1:REF<x>_DALL command tree.

dall `property` ¶

dall: DisplayWaveview1RefItemDall

Return the DISplay:WAVEView1:REF<x>_DALL command tree.

Usage

Using the .query() method will send the DISplay:WAVEView1:REF<x>_DALL? query.
Using the .verify(value) method will send the DISplay:WAVEView1:REF<x>_DALL? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.frame: The DISplay:WAVEView1:REF<x>_DALL:FRAMe command.

DisplayWaveview1RefItemDall ¶

Bases: SCPICmdRead

The DISplay:WAVEView1:REF<x>_DALL command tree.

Usage

Using the .query() method will send the DISplay:WAVEView1:REF<x>_DALL? query.
Using the .verify(value) method will send the DISplay:WAVEView1:REF<x>_DALL? query and raise an AssertionError if the returned value does not match value.

Properties

.frame: The DISplay:WAVEView1:REF<x>_DALL:FRAMe command.

frame `property` ¶

frame: DisplayWaveview1RefItemDallFrame

Return the DISplay:WAVEView1:REF<x>_DALL:FRAMe command.

Description

This command sets or returns the selected frame of the specified digital ref. Each ref has a unique selected frame.

Usage

Using the .query() method will send the DISplay:WAVEView1:REF<x>_DALL:FRAMe? query.
Using the .verify(value) method will send the DISplay:WAVEView1:REF<x>_DALL:FRAMe? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:WAVEView1:REF<x>_DALL:FRAMe value command.

SCPI Syntax

- DISplay:WAVEView1:REF<x>_DALL:FRAMe <NR1>
- DISplay:WAVEView1:REF<x>_DALL:FRAMe?

Info

<NR1> is the selected frame of the specified digital ref.

DisplayWaveview1RefItemDallFrame ¶

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:WAVEView1:REF<x>_DALL:FRAMe command.

Description

This command sets or returns the selected frame of the specified digital ref. Each ref has a unique selected frame.

Usage

Using the .query() method will send the DISplay:WAVEView1:REF<x>_DALL:FRAMe? query.
Using the .verify(value) method will send the DISplay:WAVEView1:REF<x>_DALL:FRAMe? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:WAVEView1:REF<x>_DALL:FRAMe value command.

SCPI Syntax

- DISplay:WAVEView1:REF<x>_DALL:FRAMe <NR1>
- DISplay:WAVEView1:REF<x>_DALL:FRAMe?

Info

<NR1> is the selected frame of the specified digital ref.

DisplayWaveview1RefRefItem ¶

Bases: ValidatedDynamicNumberCmd, SCPICmdRead

The DISplay:WAVEView1:REF:REF<x> command tree.

Usage

Using the .query() method will send the DISplay:WAVEView1:REF:REF<x>? query.
Using the .verify(value) method will send the DISplay:WAVEView1:REF:REF<x>? query and raise an AssertionError if the returned value does not match value.

Properties

.state: The DISplay:WAVEView1:REF:REF<x>:STATE command.
.vertical: The DISplay:WAVEView1:REF:REF<x>:VERTical command tree.
.frame: The DISplay:WAVEView1:REF:REF<x>:FRAMe command.

frame `property` ¶

frame: DisplayWaveview1RefRefItemFrame

Return the DISplay:WAVEView1:REF:REF<x>:FRAMe command.

Description

This command sets or returns the selected frame of the specified analog ref. Each ref has a unique selected frame.

Usage

Using the .query() method will send the DISplay:WAVEView1:REF:REF<x>:FRAMe? query.
Using the .verify(value) method will send the DISplay:WAVEView1:REF:REF<x>:FRAMe? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:WAVEView1:REF:REF<x>:FRAMe value command.

SCPI Syntax

- DISplay:WAVEView1:REF:REF<x>:FRAMe <NR1>
- DISplay:WAVEView1:REF:REF<x>:FRAMe?

Info

<NR1> is the selected frame of the specified analog ref.

state `property` ¶

state: DisplayWaveview1RefRefItemState

Return the DISplay:WAVEView1:REF:REF<x>:STATE command.

Description

This command sets or queries the state of the specified reference waveform in the specified Waveform View. Note: 1 is the specified Waveform View and must be WAVEView1.

Usage

Using the .query() method will send the DISplay:WAVEView1:REF:REF<x>:STATE? query.
Using the .verify(value) method will send the DISplay:WAVEView1:REF:REF<x>:STATE? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:WAVEView1:REF:REF<x>:STATE value command.

SCPI Syntax

- DISplay:WAVEView1:REF:REF<x>:STATE {ON|OFF|<NR1>}
- DISplay:WAVEView1:REF:REF<x>:STATE?

Info

<NR1> = 0 disables the specified reference in the specified Waveform View; any other value turns this feature on.
OFF disables the specified reference in the specified Waveform View.
ON enables the specified reference in the specified Waveform View.

vertical `property` ¶

vertical: DisplayWaveview1RefRefItemVertical

Return the DISplay:WAVEView1:REF:REF<x>:VERTical command tree.

Usage

Using the .query() method will send the DISplay:WAVEView1:REF:REF<x>:VERTical? query.
Using the .verify(value) method will send the DISplay:WAVEView1:REF:REF<x>:VERTical? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.position: The DISplay:WAVEView1:REF:REF<x>:VERTical:POSition command.
.scale: The DISplay:WAVEView1:REF:REF<x>:VERTical:SCAle command.

DisplayWaveview1RefRefItemFrame ¶

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:WAVEView1:REF:REF<x>:FRAMe command.

Description

This command sets or returns the selected frame of the specified analog ref. Each ref has a unique selected frame.

Usage

Using the .query() method will send the DISplay:WAVEView1:REF:REF<x>:FRAMe? query.
Using the .verify(value) method will send the DISplay:WAVEView1:REF:REF<x>:FRAMe? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:WAVEView1:REF:REF<x>:FRAMe value command.

SCPI Syntax

- DISplay:WAVEView1:REF:REF<x>:FRAMe <NR1>
- DISplay:WAVEView1:REF:REF<x>:FRAMe?

Info

<NR1> is the selected frame of the specified analog ref.

DisplayWaveview1RefRefItemState ¶

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:WAVEView1:REF:REF<x>:STATE command.

Description

This command sets or queries the state of the specified reference waveform in the specified Waveform View. Note: 1 is the specified Waveform View and must be WAVEView1.

Usage

Using the .query() method will send the DISplay:WAVEView1:REF:REF<x>:STATE? query.
Using the .verify(value) method will send the DISplay:WAVEView1:REF:REF<x>:STATE? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:WAVEView1:REF:REF<x>:STATE value command.

SCPI Syntax

- DISplay:WAVEView1:REF:REF<x>:STATE {ON|OFF|<NR1>}
- DISplay:WAVEView1:REF:REF<x>:STATE?

Info

<NR1> = 0 disables the specified reference in the specified Waveform View; any other value turns this feature on.
OFF disables the specified reference in the specified Waveform View.
ON enables the specified reference in the specified Waveform View.

DisplayWaveview1RefRefItemVertical ¶

Bases: SCPICmdRead

The DISplay:WAVEView1:REF:REF<x>:VERTical command tree.

Usage

Using the .query() method will send the DISplay:WAVEView1:REF:REF<x>:VERTical? query.
Using the .verify(value) method will send the DISplay:WAVEView1:REF:REF<x>:VERTical? query and raise an AssertionError if the returned value does not match value.

Properties

.position: The DISplay:WAVEView1:REF:REF<x>:VERTical:POSition command.
.scale: The DISplay:WAVEView1:REF:REF<x>:VERTical:SCAle command.

position `property` ¶

position: DisplayWaveview1RefRefItemVerticalPosition

Return the DISplay:WAVEView1:REF:REF<x>:VERTical:POSition command.

Description

This command sets or queries the vertical position in divisions of the specified reference in the specified Waveform View. Note: 1 is the specified Waveform View and must be WAVEView1.

Usage

Using the .query() method will send the DISplay:WAVEView1:REF:REF<x>:VERTical:POSition? query.
Using the .verify(value) method will send the DISplay:WAVEView1:REF:REF<x>:VERTical:POSition? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:WAVEView1:REF:REF<x>:VERTical:POSition value command.

SCPI Syntax

- DISplay:WAVEView1:REF:REF<x>:VERTical:POSition <NR3>
- DISplay:WAVEView1:REF:REF<x>:VERTical:POSition?

Info

<NR3> is the vertical position in divisions.

scale `property` ¶

scale: DisplayWaveview1RefRefItemVerticalScale

Return the DISplay:WAVEView1:REF:REF<x>:VERTical:SCAle command.

Description

This command sets or queries the vertical scale of the specified reference in volts per div within the specified Waveform View. Note: 1 is the specified Waveform View and must be WAVEView1.

Usage

Using the .query() method will send the DISplay:WAVEView1:REF:REF<x>:VERTical:SCAle? query.
Using the .verify(value) method will send the DISplay:WAVEView1:REF:REF<x>:VERTical:SCAle? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:WAVEView1:REF:REF<x>:VERTical:SCAle value command.

SCPI Syntax

- DISplay:WAVEView1:REF:REF<x>:VERTical:SCAle <NR3>
- DISplay:WAVEView1:REF:REF<x>:VERTical:SCAle?

Info

<NR3> is the vertical scale of the specified reference waveform.

DisplayWaveview1RefRefItemVerticalPosition ¶

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:WAVEView1:REF:REF<x>:VERTical:POSition command.

Description

This command sets or queries the vertical position in divisions of the specified reference in the specified Waveform View. Note: 1 is the specified Waveform View and must be WAVEView1.

Usage

Using the .query() method will send the DISplay:WAVEView1:REF:REF<x>:VERTical:POSition? query.
Using the .verify(value) method will send the DISplay:WAVEView1:REF:REF<x>:VERTical:POSition? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:WAVEView1:REF:REF<x>:VERTical:POSition value command.

SCPI Syntax

- DISplay:WAVEView1:REF:REF<x>:VERTical:POSition <NR3>
- DISplay:WAVEView1:REF:REF<x>:VERTical:POSition?

Info

<NR3> is the vertical position in divisions.

DisplayWaveview1RefRefItemVerticalScale ¶

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:WAVEView1:REF:REF<x>:VERTical:SCAle command.

Description

This command sets or queries the vertical scale of the specified reference in volts per div within the specified Waveform View. Note: 1 is the specified Waveform View and must be WAVEView1.

Usage

Using the .query() method will send the DISplay:WAVEView1:REF:REF<x>:VERTical:SCAle? query.
Using the .verify(value) method will send the DISplay:WAVEView1:REF:REF<x>:VERTical:SCAle? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:WAVEView1:REF:REF<x>:VERTical:SCAle value command.

SCPI Syntax

- DISplay:WAVEView1:REF:REF<x>:VERTical:SCAle <NR3>
- DISplay:WAVEView1:REF:REF<x>:VERTical:SCAle?

Info

<NR3> is the vertical scale of the specified reference waveform.

DisplayWaveview1RfFrequencyItem ¶

Bases: ValidatedDynamicNumberCmd, SCPICmdRead

The DISplay:WAVEView1:RF_FREQuency<x> command tree.

Usage

Using the .query() method will send the DISplay:WAVEView1:RF_FREQuency<x>? query.
Using the .verify(value) method will send the DISplay:WAVEView1:RF_FREQuency<x>? query and raise an AssertionError if the returned value does not match value.

Info

RF_FREQuency<x> specifies the number of the Frequency vs. Time waveform.

Properties

.vertical: The DISplay:WAVEView1:RF_FREQuency<x>:VERTical command tree.

vertical `property` ¶

vertical: DisplayWaveview1RfFrequencyItemVertical

Return the DISplay:WAVEView1:RF_FREQuency<x>:VERTical command tree.

Usage

Using the .query() method will send the DISplay:WAVEView1:RF_FREQuency<x>:VERTical? query.
Using the .verify(value) method will send the DISplay:WAVEView1:RF_FREQuency<x>:VERTical? query and raise an AssertionError if the returned value does not match value.

Info

RF_FREQuency<x> specifies the number of the Frequency vs. Time waveform.

Sub-properties

.position: The DISplay:WAVEView1:RF_FREQuency<x>:VERTical:POSition command.
.scale: The DISplay:WAVEView1:RF_FREQuency<x>:VERTical:SCAle command.

DisplayWaveview1RfFrequencyItemVertical ¶

Bases: SCPICmdRead

The DISplay:WAVEView1:RF_FREQuency<x>:VERTical command tree.

Usage

Using the .query() method will send the DISplay:WAVEView1:RF_FREQuency<x>:VERTical? query.
Using the .verify(value) method will send the DISplay:WAVEView1:RF_FREQuency<x>:VERTical? query and raise an AssertionError if the returned value does not match value.

Info

RF_FREQuency<x> specifies the number of the Frequency vs. Time waveform.

Properties

.position: The DISplay:WAVEView1:RF_FREQuency<x>:VERTical:POSition command.
.scale: The DISplay:WAVEView1:RF_FREQuency<x>:VERTical:SCAle command.

position `property` ¶

position: DisplayWaveview1RfFrequencyItemVerticalPosition

Return the DISplay:WAVEView1:RF_FREQuency<x>:VERTical:POSition command.

Description

This command sets or queries the vertical position of the specified Frequency vs. Time trace in the Waveform View, in divisions.

Usage

Using the .query() method will send the DISplay:WAVEView1:RF_FREQuency<x>:VERTical:POSition? query.
Using the .verify(value) method will send the DISplay:WAVEView1:RF_FREQuency<x>:VERTical:POSition? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:WAVEView1:RF_FREQuency<x>:VERTical:POSition value command.

SCPI Syntax

- DISplay:WAVEView1:RF_FREQuency<x>:VERTical:POSition <NR3>
- DISplay:WAVEView1:RF_FREQuency<x>:VERTical:POSition?

Info

1 is always WAVEView1.
RF_FREQuency<x> specifies the number of the Frequency vs. Time waveform.
<NR3> sets the vertical position in divisions. 0.0 divisions is center, 5.0 is the top of the Waveform View, and -5.0 is the top of the Waveform View.

scale `property` ¶

scale: DisplayWaveview1RfFrequencyItemVerticalScale

Return the DISplay:WAVEView1:RF_FREQuency<x>:VERTical:SCAle command.

Description

This command sets or queries the vertical scale of the specified Frequency vs. Time trace in the Waveform View, in divisions.

Usage

Using the .query() method will send the DISplay:WAVEView1:RF_FREQuency<x>:VERTical:SCAle? query.
Using the .verify(value) method will send the DISplay:WAVEView1:RF_FREQuency<x>:VERTical:SCAle? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:WAVEView1:RF_FREQuency<x>:VERTical:SCAle value command.

SCPI Syntax

- DISplay:WAVEView1:RF_FREQuency<x>:VERTical:SCAle <NR3>
- DISplay:WAVEView1:RF_FREQuency<x>:VERTical:SCAle?

Info

1 is always WAVEView1.
RF_FREQuency<x> specifies the number of the Frequency vs. Time waveform.
<NR3> sets the vertical scale, in Hertz per division.

DisplayWaveview1RfFrequencyItemVerticalPosition ¶

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:WAVEView1:RF_FREQuency<x>:VERTical:POSition command.

Description

This command sets or queries the vertical position of the specified Frequency vs. Time trace in the Waveform View, in divisions.

Usage

Using the .query() method will send the DISplay:WAVEView1:RF_FREQuency<x>:VERTical:POSition? query.
Using the .verify(value) method will send the DISplay:WAVEView1:RF_FREQuency<x>:VERTical:POSition? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:WAVEView1:RF_FREQuency<x>:VERTical:POSition value command.

SCPI Syntax

- DISplay:WAVEView1:RF_FREQuency<x>:VERTical:POSition <NR3>
- DISplay:WAVEView1:RF_FREQuency<x>:VERTical:POSition?

Info

1 is always WAVEView1.
RF_FREQuency<x> specifies the number of the Frequency vs. Time waveform.
<NR3> sets the vertical position in divisions. 0.0 divisions is center, 5.0 is the top of the Waveform View, and -5.0 is the top of the Waveform View.

DisplayWaveview1RfFrequencyItemVerticalScale ¶

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:WAVEView1:RF_FREQuency<x>:VERTical:SCAle command.

Description

This command sets or queries the vertical scale of the specified Frequency vs. Time trace in the Waveform View, in divisions.

Usage

Using the .query() method will send the DISplay:WAVEView1:RF_FREQuency<x>:VERTical:SCAle? query.
Using the .verify(value) method will send the DISplay:WAVEView1:RF_FREQuency<x>:VERTical:SCAle? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:WAVEView1:RF_FREQuency<x>:VERTical:SCAle value command.

SCPI Syntax

- DISplay:WAVEView1:RF_FREQuency<x>:VERTical:SCAle <NR3>
- DISplay:WAVEView1:RF_FREQuency<x>:VERTical:SCAle?

Info

1 is always WAVEView1.
RF_FREQuency<x> specifies the number of the Frequency vs. Time waveform.
<NR3> sets the vertical scale, in Hertz per division.

DisplayWaveview1RfMagnitudeItem ¶

Bases: ValidatedDynamicNumberCmd, SCPICmdRead

The DISplay:WAVEView1:RF_MAGnitude<x> command tree.

Usage

Using the .query() method will send the DISplay:WAVEView1:RF_MAGnitude<x>? query.
Using the .verify(value) method will send the DISplay:WAVEView1:RF_MAGnitude<x>? query and raise an AssertionError if the returned value does not match value.

Info

RF_MAGnitude<x> specifies the number of the Magnitude vs. Time Frequency waveform.

Properties

.vertical: The DISplay:WAVEView1:RF_MAGnitude<x>:VERTical command tree.

vertical `property` ¶

vertical: DisplayWaveview1RfMagnitudeItemVertical

Return the DISplay:WAVEView1:RF_MAGnitude<x>:VERTical command tree.

Usage

Using the .query() method will send the DISplay:WAVEView1:RF_MAGnitude<x>:VERTical? query.
Using the .verify(value) method will send the DISplay:WAVEView1:RF_MAGnitude<x>:VERTical? query and raise an AssertionError if the returned value does not match value.

Info

RF_MAGnitude<x> specifies the number of the Magnitude vs. Time Frequency waveform.

Sub-properties

.position: The DISplay:WAVEView1:RF_MAGnitude<x>:VERTical:POSition command.
.scale: The DISplay:WAVEView1:RF_MAGnitude<x>:VERTical:SCAle command.

DisplayWaveview1RfMagnitudeItemVertical ¶

Bases: SCPICmdRead

The DISplay:WAVEView1:RF_MAGnitude<x>:VERTical command tree.

Usage

Using the .query() method will send the DISplay:WAVEView1:RF_MAGnitude<x>:VERTical? query.
Using the .verify(value) method will send the DISplay:WAVEView1:RF_MAGnitude<x>:VERTical? query and raise an AssertionError if the returned value does not match value.

Info

RF_MAGnitude<x> specifies the number of the Magnitude vs. Time Frequency waveform.

Properties

.position: The DISplay:WAVEView1:RF_MAGnitude<x>:VERTical:POSition command.
.scale: The DISplay:WAVEView1:RF_MAGnitude<x>:VERTical:SCAle command.

position `property` ¶

position: DisplayWaveview1RfMagnitudeItemVerticalPosition

Return the DISplay:WAVEView1:RF_MAGnitude<x>:VERTical:POSition command.

Description

This command sets or queries the vertical position of the specified Magnitude vs. Time trace in the Waveform View, in divisions.

Usage

Using the .query() method will send the DISplay:WAVEView1:RF_MAGnitude<x>:VERTical:POSition? query.
Using the .verify(value) method will send the DISplay:WAVEView1:RF_MAGnitude<x>:VERTical:POSition? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:WAVEView1:RF_MAGnitude<x>:VERTical:POSition value command.

SCPI Syntax

- DISplay:WAVEView1:RF_MAGnitude<x>:VERTical:POSition <NR3>
- DISplay:WAVEView1:RF_MAGnitude<x>:VERTical:POSition?

Info

1 is always WAVEView1.
RF_MAGnitude<x> specifies the number of the Magnitude vs. Time Frequency waveform.
<NR3> sets the vertical position in divisions. 0.0 divisions is center, 5.0 is the top of the Waveform View, and -5.0 is the top of the Waveform View.

scale `property` ¶

scale: DisplayWaveview1RfMagnitudeItemVerticalScale

Return the DISplay:WAVEView1:RF_MAGnitude<x>:VERTical:SCAle command.

Description

This command sets or queries the vertical scale of the specified Magnitude vs. Time trace in the specified Waveform View in Volts, Watts, or dB per division.

Usage

Using the .query() method will send the DISplay:WAVEView1:RF_MAGnitude<x>:VERTical:SCAle? query.
Using the .verify(value) method will send the DISplay:WAVEView1:RF_MAGnitude<x>:VERTical:SCAle? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:WAVEView1:RF_MAGnitude<x>:VERTical:SCAle value command.

SCPI Syntax

- DISplay:WAVEView1:RF_MAGnitude<x>:VERTical:SCAle <NR3>
- DISplay:WAVEView1:RF_MAGnitude<x>:VERTical:SCAle?

Info

1 is always WAVEView1.
RF_MAGnitude<x> specifies the number of the Magnitude vs. Time Frequency waveform.
<NR3> sets the vertical scale. The units for the vertical scale depend on the Magnitude Format setting. If the format is ‘Amplitude (linear)’, then the units are Volts/div. If the format is ‘Power (linear)’, then the units are Watts/div. If the format is ‘Power (log)’, then the units are dB/div.

DisplayWaveview1RfMagnitudeItemVerticalPosition ¶

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:WAVEView1:RF_MAGnitude<x>:VERTical:POSition command.

Description

This command sets or queries the vertical position of the specified Magnitude vs. Time trace in the Waveform View, in divisions.

Usage

Using the .query() method will send the DISplay:WAVEView1:RF_MAGnitude<x>:VERTical:POSition? query.
Using the .verify(value) method will send the DISplay:WAVEView1:RF_MAGnitude<x>:VERTical:POSition? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:WAVEView1:RF_MAGnitude<x>:VERTical:POSition value command.

SCPI Syntax

- DISplay:WAVEView1:RF_MAGnitude<x>:VERTical:POSition <NR3>
- DISplay:WAVEView1:RF_MAGnitude<x>:VERTical:POSition?

Info

1 is always WAVEView1.
RF_MAGnitude<x> specifies the number of the Magnitude vs. Time Frequency waveform.
<NR3> sets the vertical position in divisions. 0.0 divisions is center, 5.0 is the top of the Waveform View, and -5.0 is the top of the Waveform View.

DisplayWaveview1RfMagnitudeItemVerticalScale ¶

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:WAVEView1:RF_MAGnitude<x>:VERTical:SCAle command.

Description

This command sets or queries the vertical scale of the specified Magnitude vs. Time trace in the specified Waveform View in Volts, Watts, or dB per division.

Usage

Using the .query() method will send the DISplay:WAVEView1:RF_MAGnitude<x>:VERTical:SCAle? query.
Using the .verify(value) method will send the DISplay:WAVEView1:RF_MAGnitude<x>:VERTical:SCAle? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:WAVEView1:RF_MAGnitude<x>:VERTical:SCAle value command.

SCPI Syntax

- DISplay:WAVEView1:RF_MAGnitude<x>:VERTical:SCAle <NR3>
- DISplay:WAVEView1:RF_MAGnitude<x>:VERTical:SCAle?

Info

1 is always WAVEView1.
RF_MAGnitude<x> specifies the number of the Magnitude vs. Time Frequency waveform.
<NR3> sets the vertical scale. The units for the vertical scale depend on the Magnitude Format setting. If the format is ‘Amplitude (linear)’, then the units are Volts/div. If the format is ‘Power (linear)’, then the units are Watts/div. If the format is ‘Power (log)’, then the units are dB/div.

DisplayWaveview1RfPhaseItem ¶

Bases: ValidatedDynamicNumberCmd, SCPICmdRead

The DISplay:WAVEView1:RF_PHASe<x> command tree.

Usage

Using the .query() method will send the DISplay:WAVEView1:RF_PHASe<x>? query.
Using the .verify(value) method will send the DISplay:WAVEView1:RF_PHASe<x>? query and raise an AssertionError if the returned value does not match value.

Info

RF_PHASe<x> specifies the number of the Phase vs. Time Frequency waveform.

Properties

.vertical: The DISplay:WAVEView1:RF_PHASe<x>:VERTical command tree.

vertical `property` ¶

vertical: DisplayWaveview1RfPhaseItemVertical

Return the DISplay:WAVEView1:RF_PHASe<x>:VERTical command tree.

Usage

Using the .query() method will send the DISplay:WAVEView1:RF_PHASe<x>:VERTical? query.
Using the .verify(value) method will send the DISplay:WAVEView1:RF_PHASe<x>:VERTical? query and raise an AssertionError if the returned value does not match value.

Info

RF_PHASe<x> specifies the number of the Phase vs. Time Frequency waveform.

Sub-properties

.position: The DISplay:WAVEView1:RF_PHASe<x>:VERTical:POSition command.
.scale: The DISplay:WAVEView1:RF_PHASe<x>:VERTical:SCAle command.

DisplayWaveview1RfPhaseItemVertical ¶

Bases: SCPICmdRead

The DISplay:WAVEView1:RF_PHASe<x>:VERTical command tree.

Usage

Using the .query() method will send the DISplay:WAVEView1:RF_PHASe<x>:VERTical? query.
Using the .verify(value) method will send the DISplay:WAVEView1:RF_PHASe<x>:VERTical? query and raise an AssertionError if the returned value does not match value.

Info

RF_PHASe<x> specifies the number of the Phase vs. Time Frequency waveform.

Properties

.position: The DISplay:WAVEView1:RF_PHASe<x>:VERTical:POSition command.
.scale: The DISplay:WAVEView1:RF_PHASe<x>:VERTical:SCAle command.

position `property` ¶

position: DisplayWaveview1RfPhaseItemVerticalPosition

Return the DISplay:WAVEView1:RF_PHASe<x>:VERTical:POSition command.

Description

This command sets or queries the vertical position of the specified Phase vs. Time trace in the Waveform View, in divisions.

Usage

Using the .query() method will send the DISplay:WAVEView1:RF_PHASe<x>:VERTical:POSition? query.
Using the .verify(value) method will send the DISplay:WAVEView1:RF_PHASe<x>:VERTical:POSition? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:WAVEView1:RF_PHASe<x>:VERTical:POSition value command.

SCPI Syntax

- DISplay:WAVEView1:RF_PHASe<x>:VERTical:POSition <NR3>
- DISplay:WAVEView1:RF_PHASe<x>:VERTical:POSition?

Info

1 is always WAVEView1.
RF_PHASe<x> specifies the number of the Phase vs. Time Frequency waveform.
<NR3> sets the vertical position in divisions. 0.0 divisions is center, 5.0 is the top of the Waveform View, and -5.0 is the top of the Waveform View.

scale `property` ¶

scale: DisplayWaveview1RfPhaseItemVerticalScale

Return the DISplay:WAVEView1:RF_PHASe<x>:VERTical:SCAle command.

Description

This command sets or queries the vertical scale of the specified Phase vs. Time trace in the specified Waveform View in degrees per division.

Usage

Using the .query() method will send the DISplay:WAVEView1:RF_PHASe<x>:VERTical:SCAle? query.
Using the .verify(value) method will send the DISplay:WAVEView1:RF_PHASe<x>:VERTical:SCAle? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:WAVEView1:RF_PHASe<x>:VERTical:SCAle value command.

SCPI Syntax

- DISplay:WAVEView1:RF_PHASe<x>:VERTical:SCAle <NR3>
- DISplay:WAVEView1:RF_PHASe<x>:VERTical:SCAle?

Info

1 is always WAVEView1.
RF_PHASe<x> specifies the number of the Phase vs. Time Frequency waveform.
<NR3> sets the vertical scale, in degrees per division.

DisplayWaveview1RfPhaseItemVerticalPosition ¶

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:WAVEView1:RF_PHASe<x>:VERTical:POSition command.

Description

This command sets or queries the vertical position of the specified Phase vs. Time trace in the Waveform View, in divisions.

Usage

Using the .query() method will send the DISplay:WAVEView1:RF_PHASe<x>:VERTical:POSition? query.
Using the .verify(value) method will send the DISplay:WAVEView1:RF_PHASe<x>:VERTical:POSition? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:WAVEView1:RF_PHASe<x>:VERTical:POSition value command.

SCPI Syntax

- DISplay:WAVEView1:RF_PHASe<x>:VERTical:POSition <NR3>
- DISplay:WAVEView1:RF_PHASe<x>:VERTical:POSition?

Info

1 is always WAVEView1.
RF_PHASe<x> specifies the number of the Phase vs. Time Frequency waveform.
<NR3> sets the vertical position in divisions. 0.0 divisions is center, 5.0 is the top of the Waveform View, and -5.0 is the top of the Waveform View.

DisplayWaveview1RfPhaseItemVerticalScale ¶

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:WAVEView1:RF_PHASe<x>:VERTical:SCAle command.

Description

This command sets or queries the vertical scale of the specified Phase vs. Time trace in the specified Waveform View in degrees per division.

Usage

Using the .query() method will send the DISplay:WAVEView1:RF_PHASe<x>:VERTical:SCAle? query.
Using the .verify(value) method will send the DISplay:WAVEView1:RF_PHASe<x>:VERTical:SCAle? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:WAVEView1:RF_PHASe<x>:VERTical:SCAle value command.

SCPI Syntax

- DISplay:WAVEView1:RF_PHASe<x>:VERTical:SCAle <NR3>
- DISplay:WAVEView1:RF_PHASe<x>:VERTical:SCAle?

Info

1 is always WAVEView1.
RF_PHASe<x> specifies the number of the Phase vs. Time Frequency waveform.
<NR3> sets the vertical scale, in degrees per division.

DisplayWaveview1Style ¶

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:WAVEView1:STYle command.

Description

This command sets or queries how the waveforms are displayed for analysis mode. Note: 1 is the specified Waveform View and must be WAVEView1.

Usage

Using the .query() method will send the DISplay:WAVEView1:STYle? query.
Using the .verify(value) method will send the DISplay:WAVEView1:STYle? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:WAVEView1:STYle value command.

SCPI Syntax

- DISplay:WAVEView1:STYle {VECtors|DOTsonly}
- DISplay:WAVEView1:STYle?

Info

DOTsonly displays individual data points. New points immediately replace old ones.
VECtors connects adjacent data points. New points immediately replace old ones.

DisplayWaveview1Viewstyle ¶

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:WAVEView1:VIEWStyle command.

Description

The command sets or queries the waveform layout style used by the display. Note: 1 is the specified Waveform View and must be WAVEView1.

Usage

Using the .query() method will send the DISplay:WAVEView1:VIEWStyle? query.
Using the .verify(value) method will send the DISplay:WAVEView1:VIEWStyle? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:WAVEView1:VIEWStyle value command.

SCPI Syntax

- DISplay:WAVEView1:VIEWStyle {OVErlay|STAcked}
- DISplay:WAVEView1:VIEWStyle?

Info

OVErlay specifies that the display view style used by the specified Waveform View is overlay.
STAcked specifies that the display view style used by the specified Waveform View is stacked.

DisplayWaveview1Zoom ¶

Bases: SCPICmdRead

The DISplay:WAVEView1:ZOOM command.

Description

This query returns the zoom parameters of the specified Waveform View. Note: 1 is the specified Waveform View and must be WAVEView1.

Usage

Using the .query() method will send the DISplay:WAVEView1:ZOOM? query.
Using the .verify(value) method will send the DISplay:WAVEView1:ZOOM? query and raise an AssertionError if the returned value does not match value.

SCPI Syntax

- DISplay:WAVEView1:ZOOM?

Properties

.zoom1: The DISplay:WAVEView1:ZOOM:ZOOM1 command.

zoom1 `property` ¶

zoom1: DisplayWaveview1ZoomZoom1

Return the DISplay:WAVEView1:ZOOM:ZOOM1 command.

Description

This query returns the zoom parameters of the specified zoom in the specified Waveform View. must be 1. Note: 1 is the specified Waveform View and must be WAVEView1. 1 is the specified zoom and must be ZOOM1.

Usage

Using the .query() method will send the DISplay:WAVEView1:ZOOM:ZOOM1? query.
Using the .verify(value) method will send the DISplay:WAVEView1:ZOOM:ZOOM1? query and raise an AssertionError if the returned value does not match value.

SCPI Syntax

- DISplay:WAVEView1:ZOOM:ZOOM1?

Sub-properties

.horizontal: The DISplay:WAVEView1:ZOOM:ZOOM1:HORizontal command tree.
.state: The DISplay:WAVEView1:ZOOM:ZOOM1:STATe command.
.vertical: The DISplay:WAVEView1:ZOOM:ZOOM1:VERTical command tree.

DisplayWaveview1ZoomZoom1 ¶

Bases: SCPICmdRead

The DISplay:WAVEView1:ZOOM:ZOOM1 command.

Description

This query returns the zoom parameters of the specified zoom in the specified Waveform View. must be 1. Note: 1 is the specified Waveform View and must be WAVEView1. 1 is the specified zoom and must be ZOOM1.

Usage

Using the .query() method will send the DISplay:WAVEView1:ZOOM:ZOOM1? query.
Using the .verify(value) method will send the DISplay:WAVEView1:ZOOM:ZOOM1? query and raise an AssertionError if the returned value does not match value.

SCPI Syntax

- DISplay:WAVEView1:ZOOM:ZOOM1?

Properties

.horizontal: The DISplay:WAVEView1:ZOOM:ZOOM1:HORizontal command tree.
.state: The DISplay:WAVEView1:ZOOM:ZOOM1:STATe command.
.vertical: The DISplay:WAVEView1:ZOOM:ZOOM1:VERTical command tree.

horizontal `property` ¶

horizontal: DisplayWaveview1ZoomZoom1Horizontal

Return the DISplay:WAVEView1:ZOOM:ZOOM1:HORizontal command tree.

Usage

Using the .query() method will send the DISplay:WAVEView1:ZOOM:ZOOM1:HORizontal? query.
Using the .verify(value) method will send the DISplay:WAVEView1:ZOOM:ZOOM1:HORizontal? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.position: The DISplay:WAVEView1:ZOOM:ZOOM1:HORizontal:POSition command.
.scale: The DISplay:WAVEView1:ZOOM:ZOOM1:HORizontal:SCALe command.
.winscale: The DISplay:WAVEView1:ZOOM:ZOOM1:HORizontal:WINSCALe command.

state `property` ¶

state: DisplayWaveview1ZoomZoom1State

Return the DISplay:WAVEView1:ZOOM:ZOOM1:STATe command.

Description

This command sets or queries the zoom display state of the specified zoom in the specified Waveform View. This command is equivalent to pushing the zoom button on the front panel. Note: 1 is the specified Waveform View and must be WAVEView1. 1 is the specified zoom and must be ZOOM1.

Usage

Using the .query() method will send the DISplay:WAVEView1:ZOOM:ZOOM1:STATe? query.
Using the .verify(value) method will send the DISplay:WAVEView1:ZOOM:ZOOM1:STATe? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:WAVEView1:ZOOM:ZOOM1:STATe value command.

SCPI Syntax

- DISplay:WAVEView1:ZOOM:ZOOM1:STATe {ON|OFF|<NR1>}
- DISplay:WAVEView1:ZOOM:ZOOM1:STATe?

Info

ON turns the specified zoom on.
OFF turns specified zoom off.
<NR1> = 0 disables the specified zoom; any other value enables the specified zoom.

vertical `property` ¶

vertical: DisplayWaveview1ZoomZoom1Vertical

Return the DISplay:WAVEView1:ZOOM:ZOOM1:VERTical command tree.

Usage

Using the .query() method will send the DISplay:WAVEView1:ZOOM:ZOOM1:VERTical? query.
Using the .verify(value) method will send the DISplay:WAVEView1:ZOOM:ZOOM1:VERTical? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.position: The DISplay:WAVEView1:ZOOM:ZOOM1:VERTical:POSition command.
.scale: The DISplay:WAVEView1:ZOOM:ZOOM1:VERTical:SCALe command.

DisplayWaveview1ZoomZoom1Horizontal ¶

Bases: SCPICmdRead

The DISplay:WAVEView1:ZOOM:ZOOM1:HORizontal command tree.

Usage

Using the .query() method will send the DISplay:WAVEView1:ZOOM:ZOOM1:HORizontal? query.
Using the .verify(value) method will send the DISplay:WAVEView1:ZOOM:ZOOM1:HORizontal? query and raise an AssertionError if the returned value does not match value.

Properties

.position: The DISplay:WAVEView1:ZOOM:ZOOM1:HORizontal:POSition command.
.scale: The DISplay:WAVEView1:ZOOM:ZOOM1:HORizontal:SCALe command.
.winscale: The DISplay:WAVEView1:ZOOM:ZOOM1:HORizontal:WINSCALe command.

position `property` ¶

position: DisplayWaveview1ZoomZoom1HorizontalPosition

Return the DISplay:WAVEView1:ZOOM:ZOOM1:HORizontal:POSition command.

Description

Sets or queries the horizontal zoom position (of the specified zoom in the specified Waveform View) of the zoomed waveform or zoom waveform in the display, around which the zoom waveform displays. It is freely movable around the acquisition settings (horizontal span). An acquired waveform or reference could extend off screen. The valid zoom area does not care about the waveform itself, only the user setting for acquisition. For example, if horizontal scale is set to 1 second, position to 50, then the acquisition area will go from -5 s to +5 s. Zoom window 0 will focus on -5 s and zoom area 100 will focus on +5 s. If the instrument is stopped and the scale changed to 0.5 s, there will be data off the ends of the display. However, 0% zoom will put the user focus on -2.5 s, the lower bound of the acquisition span. Note: 1 is the specified Waveform View and must be WAVEView1. 1 is the specified zoom and must be ZOOM1.

Usage

Using the .query() method will send the DISplay:WAVEView1:ZOOM:ZOOM1:HORizontal:POSition? query.
Using the .verify(value) method will send the DISplay:WAVEView1:ZOOM:ZOOM1:HORizontal:POSition? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:WAVEView1:ZOOM:ZOOM1:HORizontal:POSition value command.

SCPI Syntax

- DISplay:WAVEView1:ZOOM:ZOOM1:HORizontal:POSition <NR3>
- DISplay:WAVEView1:ZOOM:ZOOM1:HORizontal:POSition?

Info

<NR3> is a value from 0 to 100.00 and is the percent of the waveform that is to the left of screen center, when the zoom factor is 2× or greater.

scale `property` ¶

scale: DisplayWaveview1ZoomZoom1HorizontalScale

Return the DISplay:WAVEView1:ZOOM:ZOOM1:HORizontal:SCALe command.

Description

This command sets or queries the horizontal zoom factor of the specified zoom in the specified Waveform View. Note: 1 is the specified Waveform View and must be WAVEView1. 1 is the specified zoom and must be ZOOM1.

Usage

Using the .query() method will send the DISplay:WAVEView1:ZOOM:ZOOM1:HORizontal:SCALe? query.
Using the .verify(value) method will send the DISplay:WAVEView1:ZOOM:ZOOM1:HORizontal:SCALe? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:WAVEView1:ZOOM:ZOOM1:HORizontal:SCALe value command.

SCPI Syntax

- DISplay:WAVEView1:ZOOM:ZOOM1:HORizontal:SCALe <NR3>
- DISplay:WAVEView1:ZOOM:ZOOM1:HORizontal:SCALe?

Info

<NR3> is the amount of expansion in the horizontal direction in 1-2-4 increments of the specified zoom in the specified Waveform View.

winscale `property` ¶

winscale: DisplayWaveview1ZoomZoom1HorizontalWinscale

Return the DISplay:WAVEView1:ZOOM:ZOOM1:HORizontal:WINSCALe command.

Description

This command sets or queries the overview window horizontal scale in the specified Waveform View. Note: 1 is the specified Waveform View and must be WAVEView1. 1 is the specified zoom and must be ZOOM1.

Usage

Using the .query() method will send the DISplay:WAVEView1:ZOOM:ZOOM1:HORizontal:WINSCALe? query.
Using the .verify(value) method will send the DISplay:WAVEView1:ZOOM:ZOOM1:HORizontal:WINSCALe? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:WAVEView1:ZOOM:ZOOM1:HORizontal:WINSCALe value command.

SCPI Syntax

- DISplay:WAVEView1:ZOOM:ZOOM1:HORizontal:WINSCALe <NR3>
- DISplay:WAVEView1:ZOOM:ZOOM1:HORizontal:WINSCALe?

Info

<NR3> is the horizontal scale of the zoom window.

DisplayWaveview1ZoomZoom1HorizontalPosition ¶

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:WAVEView1:ZOOM:ZOOM1:HORizontal:POSition command.

Description

Sets or queries the horizontal zoom position (of the specified zoom in the specified Waveform View) of the zoomed waveform or zoom waveform in the display, around which the zoom waveform displays. It is freely movable around the acquisition settings (horizontal span). An acquired waveform or reference could extend off screen. The valid zoom area does not care about the waveform itself, only the user setting for acquisition. For example, if horizontal scale is set to 1 second, position to 50, then the acquisition area will go from -5 s to +5 s. Zoom window 0 will focus on -5 s and zoom area 100 will focus on +5 s. If the instrument is stopped and the scale changed to 0.5 s, there will be data off the ends of the display. However, 0% zoom will put the user focus on -2.5 s, the lower bound of the acquisition span. Note: 1 is the specified Waveform View and must be WAVEView1. 1 is the specified zoom and must be ZOOM1.

Usage

Using the .query() method will send the DISplay:WAVEView1:ZOOM:ZOOM1:HORizontal:POSition? query.
Using the .verify(value) method will send the DISplay:WAVEView1:ZOOM:ZOOM1:HORizontal:POSition? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:WAVEView1:ZOOM:ZOOM1:HORizontal:POSition value command.

SCPI Syntax

- DISplay:WAVEView1:ZOOM:ZOOM1:HORizontal:POSition <NR3>
- DISplay:WAVEView1:ZOOM:ZOOM1:HORizontal:POSition?

Info

<NR3> is a value from 0 to 100.00 and is the percent of the waveform that is to the left of screen center, when the zoom factor is 2× or greater.

DisplayWaveview1ZoomZoom1HorizontalScale ¶

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:WAVEView1:ZOOM:ZOOM1:HORizontal:SCALe command.

Description

This command sets or queries the horizontal zoom factor of the specified zoom in the specified Waveform View. Note: 1 is the specified Waveform View and must be WAVEView1. 1 is the specified zoom and must be ZOOM1.

Usage

Using the .query() method will send the DISplay:WAVEView1:ZOOM:ZOOM1:HORizontal:SCALe? query.
Using the .verify(value) method will send the DISplay:WAVEView1:ZOOM:ZOOM1:HORizontal:SCALe? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:WAVEView1:ZOOM:ZOOM1:HORizontal:SCALe value command.

SCPI Syntax

- DISplay:WAVEView1:ZOOM:ZOOM1:HORizontal:SCALe <NR3>
- DISplay:WAVEView1:ZOOM:ZOOM1:HORizontal:SCALe?

Info

<NR3> is the amount of expansion in the horizontal direction in 1-2-4 increments of the specified zoom in the specified Waveform View.

DisplayWaveview1ZoomZoom1HorizontalWinscale ¶

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:WAVEView1:ZOOM:ZOOM1:HORizontal:WINSCALe command.

Description

This command sets or queries the overview window horizontal scale in the specified Waveform View. Note: 1 is the specified Waveform View and must be WAVEView1. 1 is the specified zoom and must be ZOOM1.

Usage

Using the .query() method will send the DISplay:WAVEView1:ZOOM:ZOOM1:HORizontal:WINSCALe? query.
Using the .verify(value) method will send the DISplay:WAVEView1:ZOOM:ZOOM1:HORizontal:WINSCALe? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:WAVEView1:ZOOM:ZOOM1:HORizontal:WINSCALe value command.

SCPI Syntax

- DISplay:WAVEView1:ZOOM:ZOOM1:HORizontal:WINSCALe <NR3>
- DISplay:WAVEView1:ZOOM:ZOOM1:HORizontal:WINSCALe?

Info

<NR3> is the horizontal scale of the zoom window.

DisplayWaveview1ZoomZoom1State ¶

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:WAVEView1:ZOOM:ZOOM1:STATe command.

Description

This command sets or queries the zoom display state of the specified zoom in the specified Waveform View. This command is equivalent to pushing the zoom button on the front panel. Note: 1 is the specified Waveform View and must be WAVEView1. 1 is the specified zoom and must be ZOOM1.

Usage

Using the .query() method will send the DISplay:WAVEView1:ZOOM:ZOOM1:STATe? query.
Using the .verify(value) method will send the DISplay:WAVEView1:ZOOM:ZOOM1:STATe? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:WAVEView1:ZOOM:ZOOM1:STATe value command.

SCPI Syntax

- DISplay:WAVEView1:ZOOM:ZOOM1:STATe {ON|OFF|<NR1>}
- DISplay:WAVEView1:ZOOM:ZOOM1:STATe?

Info

ON turns the specified zoom on.
OFF turns specified zoom off.
<NR1> = 0 disables the specified zoom; any other value enables the specified zoom.

DisplayWaveview1ZoomZoom1Vertical ¶

Bases: SCPICmdRead

The DISplay:WAVEView1:ZOOM:ZOOM1:VERTical command tree.

Usage

Using the .query() method will send the DISplay:WAVEView1:ZOOM:ZOOM1:VERTical? query.
Using the .verify(value) method will send the DISplay:WAVEView1:ZOOM:ZOOM1:VERTical? query and raise an AssertionError if the returned value does not match value.

Properties

.position: The DISplay:WAVEView1:ZOOM:ZOOM1:VERTical:POSition command.
.scale: The DISplay:WAVEView1:ZOOM:ZOOM1:VERTical:SCALe command.

position `property` ¶

position: DisplayWaveview1ZoomZoom1VerticalPosition

Return the DISplay:WAVEView1:ZOOM:ZOOM1:VERTical:POSition command.

Description

This command sets or queries the vertical position of the specified zoom in the specified Waveform View. It is freely movable within the confines of the acquired waveform. It is measured from the top to bottom of the acquisition window. The top of the zoom window is -5 * vertical zoom factor. The bottom of the zoom window is +5 * the vertical zoom factor. For a zoom of 5x, the position ranges from -25 to 25. Note: 1 is the specified Waveform View and must be WAVEView1. 1 is the specified zoom and must be ZOOM1.

Usage

Using the .query() method will send the DISplay:WAVEView1:ZOOM:ZOOM1:VERTical:POSition? query.
Using the .verify(value) method will send the DISplay:WAVEView1:ZOOM:ZOOM1:VERTical:POSition? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:WAVEView1:ZOOM:ZOOM1:VERTical:POSition value command.

SCPI Syntax

- DISplay:WAVEView1:ZOOM:ZOOM1:VERTical:POSition <NR3>
- DISplay:WAVEView1:ZOOM:ZOOM1:VERTical:POSition?

Info

<NR3> is the vertical position of the specified zoom in the specified Waveform View. It is freely movable within the confines of the acquired waveform. The top of the zoom window is -5 \ vertical zoom factor. The bottom of the zoom window is +5 \ the vertical zoom factor. For a vertical zoom of 5x, the position ranges from -25 to 25.

scale `property` ¶

scale: DisplayWaveview1ZoomZoom1VerticalScale

Return the DISplay:WAVEView1:ZOOM:ZOOM1:VERTical:SCALe command.

Description

This command sets or queries the vertical zoom factor of the specified zoom in the specified Waveform View. Note: 1 is the specified Waveform View and must be WAVEView1. 1 is the specified zoom and must be ZOOM1.

Usage

Using the .query() method will send the DISplay:WAVEView1:ZOOM:ZOOM1:VERTical:SCALe? query.
Using the .verify(value) method will send the DISplay:WAVEView1:ZOOM:ZOOM1:VERTical:SCALe? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:WAVEView1:ZOOM:ZOOM1:VERTical:SCALe value command.

SCPI Syntax

- DISplay:WAVEView1:ZOOM:ZOOM1:VERTical:SCALe <NR3>
- DISplay:WAVEView1:ZOOM:ZOOM1:VERTical:SCALe?

Info

<NR3> is the amount of vertical expansion or compression. Based on the value that you entered, this command uses the nearest scale factor. Setting the vertical scale to 1 indicates unity (no zoom).

DisplayWaveview1ZoomZoom1VerticalPosition ¶

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:WAVEView1:ZOOM:ZOOM1:VERTical:POSition command.

Description

This command sets or queries the vertical position of the specified zoom in the specified Waveform View. It is freely movable within the confines of the acquired waveform. It is measured from the top to bottom of the acquisition window. The top of the zoom window is -5 * vertical zoom factor. The bottom of the zoom window is +5 * the vertical zoom factor. For a zoom of 5x, the position ranges from -25 to 25. Note: 1 is the specified Waveform View and must be WAVEView1. 1 is the specified zoom and must be ZOOM1.

Usage

Using the .query() method will send the DISplay:WAVEView1:ZOOM:ZOOM1:VERTical:POSition? query.
Using the .verify(value) method will send the DISplay:WAVEView1:ZOOM:ZOOM1:VERTical:POSition? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:WAVEView1:ZOOM:ZOOM1:VERTical:POSition value command.

SCPI Syntax

- DISplay:WAVEView1:ZOOM:ZOOM1:VERTical:POSition <NR3>
- DISplay:WAVEView1:ZOOM:ZOOM1:VERTical:POSition?

Info

<NR3> is the vertical position of the specified zoom in the specified Waveform View. It is freely movable within the confines of the acquired waveform. The top of the zoom window is -5 \ vertical zoom factor. The bottom of the zoom window is +5 \ the vertical zoom factor. For a vertical zoom of 5x, the position ranges from -25 to 25.

DisplayWaveview1ZoomZoom1VerticalScale ¶

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:WAVEView1:ZOOM:ZOOM1:VERTical:SCALe command.

Description

This command sets or queries the vertical zoom factor of the specified zoom in the specified Waveform View. Note: 1 is the specified Waveform View and must be WAVEView1. 1 is the specified zoom and must be ZOOM1.

Usage

Using the .query() method will send the DISplay:WAVEView1:ZOOM:ZOOM1:VERTical:SCALe? query.
Using the .verify(value) method will send the DISplay:WAVEView1:ZOOM:ZOOM1:VERTical:SCALe? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:WAVEView1:ZOOM:ZOOM1:VERTical:SCALe value command.

SCPI Syntax

- DISplay:WAVEView1:ZOOM:ZOOM1:VERTical:SCALe <NR3>
- DISplay:WAVEView1:ZOOM:ZOOM1:VERTical:SCALe?

Info

<NR3> is the amount of vertical expansion or compression. Based on the value that you entered, this command uses the nearest scale factor. Setting the vertical scale to 1 indicates unity (no zoom).

DisplayWaveviewCursor ¶

Bases: SCPICmdRead

The DISplay:WAVEView:CURSor command tree.

Usage

Using the .query() method will send the DISplay:WAVEView:CURSor? query.
Using the .verify(value) method will send the DISplay:WAVEView:CURSor? query and raise an AssertionError if the returned value does not match value.

Properties

.cursor1: The DISplay:WAVEView:CURSor:CURSOR1 command tree.

cursor1 `property` ¶

cursor1: DisplayWaveviewCursorCursor1

Return the DISplay:WAVEView:CURSor:CURSOR1 command tree.

Usage

Using the .query() method will send the DISplay:WAVEView:CURSor:CURSOR1? query.
Using the .verify(value) method will send the DISplay:WAVEView:CURSor:CURSOR1? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.rolocation: The DISplay:WAVEView:CURSor:CURSOR1:ROLOCATION command.

DisplayWaveviewCursorCursor1 ¶

Bases: SCPICmdRead

The DISplay:WAVEView:CURSor:CURSOR1 command tree.

Usage

Using the .query() method will send the DISplay:WAVEView:CURSor:CURSOR1? query.
Using the .verify(value) method will send the DISplay:WAVEView:CURSor:CURSOR1? query and raise an AssertionError if the returned value does not match value.

Properties

.rolocation: The DISplay:WAVEView:CURSor:CURSOR1:ROLOCATION command.

rolocation `property` ¶

rolocation: DisplayWaveviewCursorCursor1Rolocation

Return the DISplay:WAVEView:CURSor:CURSOR1:ROLOCATION command.

Description

This command sets or queries the location to display the Waveform View cursor readouts (in the Waveform View graticule or in a badge in the Results Bar).

Usage

Using the .query() method will send the DISplay:WAVEView:CURSor:CURSOR1:ROLOCATION? query.
Using the .verify(value) method will send the DISplay:WAVEView:CURSor:CURSOR1:ROLOCATION? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:WAVEView:CURSor:CURSOR1:ROLOCATION value command.

SCPI Syntax

- DISplay:WAVEView:CURSor:CURSOR1:ROLOCATION {GRATICULE|BADGE}
- DISplay:WAVEView:CURSor:CURSOR1:ROLOCATION?

Info

GRATICULE sets the Waveform View cursor readouts to display as part of the cursors in the plot view.
BADGE removes the Waveform View cursor readouts from the cursors in the graticule and displays the cursor information as a badge in the Results Bar.

DisplayWaveviewCursorCursor1Rolocation ¶

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:WAVEView:CURSor:CURSOR1:ROLOCATION command.

Description

This command sets or queries the location to display the Waveform View cursor readouts (in the Waveform View graticule or in a badge in the Results Bar).

Usage

Using the .query() method will send the DISplay:WAVEView:CURSor:CURSOR1:ROLOCATION? query.
Using the .verify(value) method will send the DISplay:WAVEView:CURSor:CURSOR1:ROLOCATION? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:WAVEView:CURSor:CURSOR1:ROLOCATION value command.

SCPI Syntax

- DISplay:WAVEView:CURSor:CURSOR1:ROLOCATION {GRATICULE|BADGE}
- DISplay:WAVEView:CURSor:CURSOR1:ROLOCATION?

Info

GRATICULE sets the Waveform View cursor readouts to display as part of the cursors in the plot view.
BADGE removes the Waveform View cursor readouts from the cursors in the graticule and displays the cursor information as a badge in the Results Bar.

DisplayWaveviewGridtype ¶

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:WAVEView:GRIDTYPE command.

Description

This command sets or queries the Waveform View Graticule type.

Usage

Using the .query() method will send the DISplay:WAVEView:GRIDTYPE? query.
Using the .verify(value) method will send the DISplay:WAVEView:GRIDTYPE? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DISplay:WAVEView:GRIDTYPE value command.

SCPI Syntax

- DISplay:WAVEView:GRIDTYPE {MOVEABLE|FIXED}
- DISplay:WAVEView:GRIDTYPE?

Info

MOVEABLE sets the Waveform View so that both the waveform and the grid (graticule) move together when moving the waveform horizontally.
FIXED sets the Waveform View so that the grid dows not move when moving the waveform horizontally.

display ¶

Display ¶

ch property ¶

colors property ¶

global_ property ¶

intensity property ¶

math property ¶

mathfftview1 property ¶

meas property ¶

persistence property ¶

plotview1 property ¶

ref property ¶

reffftview property ¶

select property ¶

specview1 property ¶

varpersist property ¶

waveform property ¶

waveview property ¶

waveview1 property ¶

DisplayChannel ¶

invertcolor property ¶

normalcolor property ¶

DisplayChannelInvertcolor ¶

DisplayChannelNormalcolor ¶

DisplayColors ¶

DisplayGlobal ¶

b property ¶

ch property ¶

math property ¶

plot property ¶

ref property ¶

DisplayGlobalBItem ¶

state property ¶

DisplayGlobalBItemState ¶

DisplayGlobalChannel ¶

state property ¶

DisplayGlobalChannelState ¶

DisplayGlobalMathItem ¶

state property ¶

DisplayGlobalMathItemState ¶

DisplayGlobalPlotItem ¶

state property ¶

DisplayGlobalPlotItemState ¶

DisplayGlobalRefItem ¶

state property ¶

DisplayGlobalRefItemState ¶

DisplayIntensity ¶

backlight property ¶

DisplayIntensityBacklight ¶

autodim property ¶

DisplayIntensityBacklightAutodim ¶

enable property ¶

time property ¶

DisplayIntensityBacklightAutodimEnable ¶

DisplayIntensityBacklightAutodimTime ¶

DisplayMathItem ¶

invertcolor property ¶

normalcolor property ¶

DisplayMathItemInvertcolor ¶

DisplayMathItemNormalcolor ¶

DisplayMathfftview1 ¶

autoscale property ¶

cursor property ¶

gridlines property ¶

math property ¶

xaxis property ¶

yaxis property ¶

zoom property ¶

DisplayMathfftview1Autoscale ¶

DisplayMathfftview1Cursor ¶

asource property ¶

bsource property ¶

ddt property ¶

function property ¶

hbars property ¶

mode property ¶

oneoverdeltatvalue property ¶

rolocation property ¶

screen property ¶

state property ¶

ch `property` ¶

colors `property` ¶

global_ `property` ¶

intensity `property` ¶

math `property` ¶

mathfftview1 `property` ¶

meas `property` ¶

persistence `property` ¶

plotview1 `property` ¶

ref `property` ¶

reffftview `property` ¶

select `property` ¶

specview1 `property` ¶

varpersist `property` ¶

waveform `property` ¶

waveview `property` ¶

waveview1 `property` ¶

invertcolor `property` ¶

normalcolor `property` ¶

b `property` ¶

ch `property` ¶

math `property` ¶

plot `property` ¶

ref `property` ¶

state `property` ¶

state `property` ¶

state `property` ¶

state `property` ¶

state `property` ¶

backlight `property` ¶

autodim `property` ¶

enable `property` ¶

time `property` ¶

invertcolor `property` ¶

normalcolor `property` ¶

autoscale `property` ¶

cursor `property` ¶

gridlines `property` ¶

math `property` ¶

xaxis `property` ¶

yaxis `property` ¶

zoom `property` ¶

asource `property` ¶

bsource `property` ¶

ddt `property` ¶

function `property` ¶

hbars `property` ¶

mode `property` ¶

oneoverdeltatvalue `property` ¶

rolocation `property` ¶

screen `property` ¶

state `property` ¶

vbars `property` ¶

waveform `property` ¶

aposition `property` ¶

aunits `property` ¶

bposition `property` ¶

bunits `property` ¶

delta `property` ¶

axposition `property` ¶

ayposition `property` ¶

bxposition `property` ¶

byposition `property` ¶

aposition `property` ¶

aunits `property` ¶

bposition `property` ¶

bunits `property` ¶

delta `property` ¶

aposition `property` ¶

bposition `property` ¶

math `property` ¶

state `property` ¶

scale `property` ¶

scale `property` ¶

xaxis `property` ¶

yaxis `property` ¶

from_ `property` ¶

to `property` ¶

from_ `property` ¶

to `property` ¶