[python source code]

horizontal

The horizontal commands module.

These commands are used in the following models: LPD6, MSO4, MSO4B, MSO5, MSO5B, MSO5LP, MSO6, MSO6B

THIS FILE IS AUTO-GENERATED, IT SHOULD NOT BE MANUALLY MODIFIED.

Please report an issue if one is found.

Commands and Queries 
- HORizontal:ACQDURATION?
- HORizontal:DELay:MODe {ON|OFF|<NR1>}
- HORizontal:DELay:MODe?
- HORizontal:DELay:TIMe <NR3>
- HORizontal:DELay:TIMe?
- HORizontal:DIVisions?
- HORizontal:FASTframe:COUNt <NR1>
- HORizontal:FASTframe:COUNt?
- HORizontal:FASTframe:MAXFRames?
- HORizontal:FASTframe:MULtipleframes:MODe {OFF|OVERlay}
- HORizontal:FASTframe:MULtipleframes:MODe?
- HORizontal:FASTframe:REF:FRAme <NR1>
- HORizontal:FASTframe:REF:FRAme?
- HORizontal:FASTframe:REF:INCLUde {ON|OFF|<NR1>}
- HORizontal:FASTframe:REF:INCLUde?
- HORizontal:FASTframe:SELECTED <NR1>
- HORizontal:FASTframe:SELECTED?
- HORizontal:FASTframe:STATE {ON|OFF|<NR1>}
- HORizontal:FASTframe:STATE?
- HORizontal:FASTframe:SUMFrame {NONe|AVErage|ENVelope}
- HORizontal:FASTframe:SUMFrame:STATE {ON|OFF|<NR1>}
- HORizontal:FASTframe:SUMFrame:STATE?
- HORizontal:FASTframe:SUMFrame?
- HORizontal:FASTframe:TIMEStamp:ALL?
- HORizontal:FASTframe:TIMEStamp:DELTa?
- HORizontal:FASTframe:TIMEStamp:REFerence?
- HORizontal:FASTframe:TIMEStamp:SELECTED?
- HORizontal:FASTframe:XZEro:ALL?
- HORizontal:FASTframe:XZEro:REF?
- HORizontal:FASTframe:XZEro:SELECTED?
- HORizontal:FASTframe?
- HORizontal:HISTory:CSTAts {AACQs|HONLy}
- HORizontal:HISTory:CSTAts?
- HORizontal:HISTory:OVERlay {ON|OFF}
- HORizontal:HISTory:OVERlay?
- HORizontal:HISTory:REF:ACQ <NR1>
- HORizontal:HISTory:REF:ACQ?
- HORizontal:HISTory:REF:INClude {ON|OFF}
- HORizontal:HISTory:REF:INClude?
- HORizontal:HISTory:SELected <NR1>
- HORizontal:HISTory:SELected?
- HORizontal:HISTory:STATe {ON|OFF|1|0}
- HORizontal:HISTory:STATe?
- HORizontal:HISTory:TIMEStamp:DELTa?
- HORizontal:HISTory:TIMEStamp:REFerence?
- HORizontal:HISTory:TIMEStamp:SELECTED?
- HORizontal:MAIn:INTERPRatio?
- HORizontal:MODe {AUTO|MANual}
- HORizontal:MODe:AUTOmatic:FASTAcq:RECOrdlength:MAXimum:VALue <NR1>
- HORizontal:MODe:AUTOmatic:FASTAcq:RECOrdlength:MAXimum:VALue?
- HORizontal:MODe:AUTOmatic:FASTAcq:RECOrdlength:MAXimum:ZOOMOVERride {ON|OFF|1|0}
- HORizontal:MODe:AUTOmatic:FASTAcq:RECOrdlength:MAXimum:ZOOMOVERride?
- HORizontal:MODe:MANual:CONFIGure {HORIZontalscale|RECORDLength}
- HORizontal:MODe:MANual:CONFIGure?
- HORizontal:MODe:RECOrdlength <NR1>
- HORizontal:MODe:RECOrdlength?
- HORizontal:MODe:SAMPLERate <NR1>
- HORizontal:MODe:SAMPLERate?
- HORizontal:MODe:SCAle <NR1>
- HORizontal:MODe:SCAle?
- HORizontal:MODe?
- HORizontal:POSition <NR3>
- HORizontal:POSition?
- HORizontal:PREViewstate?
- HORizontal:RECOrdlength <NR1>
- HORizontal:RECOrdlength?
- HORizontal:ROLL?
- HORizontal:SAMPLERate <NR3>
- HORizontal:SAMPLERate:ANALYZemode:MINimum:OVERRide {ON|OFF|1|0}
- HORizontal:SAMPLERate:ANALYZemode:MINimum:OVERRide?
- HORizontal:SAMPLERate:ANALYZemode:MINimum:VALue {AUTOmatic|<NR3>}
- HORizontal:SAMPLERate:ANALYZemode:MINimum:VALue?
- HORizontal:SAMPLERate?
- HORizontal:SCAle <NR3>
- HORizontal:SCAle?
- HORizontal?

Horizontal

Bases: SCPICmdRead

The HORizontal command.

Description
  • Queries the current horizontal settings.
Usage
  • Using the .query() method will send the HORizontal? query.
  • Using the .verify(value) method will send the HORizontal? query and raise an AssertionError if the returned value does not match value.
SCPI Syntax 
- HORizontal?
Properties
  • .acqduration: The HORizontal:ACQDURATION command.
  • .delay: The HORizontal:DELay command tree.
  • .divisions: The HORizontal:DIVisions command.
  • .fastframe: The HORizontal:FASTframe command.
  • .history: The HORizontal:HISTory command tree.
  • .main: The HORizontal:MAIn command tree.
  • .mode: The HORizontal:MODe command.
  • .position: The HORizontal:POSition command.
  • .previewstate: The HORizontal:PREViewstate command.
  • .recordlength: The HORizontal:RECOrdlength command.
  • .roll: The HORizontal:ROLL command.
  • .samplerate: The HORizontal:SAMPLERate command.
  • .scale: The HORizontal:SCAle command.

acqduration property 

acqduration: HorizontalAcqduration

Return the HORizontal:ACQDURATION command.

Description
  • This query returns the timebase duration.
Usage
  • Using the .query() method will send the HORizontal:ACQDURATION? query.
  • Using the .verify(value) method will send the HORizontal:ACQDURATION? query and raise an AssertionError if the returned value does not match value.
SCPI Syntax 
- HORizontal:ACQDURATION?

delay property 

delay: HorizontalDelay

Return the HORizontal:DELay command tree.

Usage
  • Using the .query() method will send the HORizontal:DELay? query.
  • Using the .verify(value) method will send the HORizontal:DELay? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .mode: The HORizontal:DELay:MODe command.
  • .time: The HORizontal:DELay:TIMe command.

divisions property 

divisions: HorizontalDivisions

Return the HORizontal:DIVisions command.

Description
  • This query-only command returns the number of graticule divisions.
Usage
  • Using the .query() method will send the HORizontal:DIVisions? query.
  • Using the .verify(value) method will send the HORizontal:DIVisions? query and raise an AssertionError if the returned value does not match value.
SCPI Syntax 
- HORizontal:DIVisions?

fastframe property 

fastframe: HorizontalFastframe

Return the HORizontal:FASTframe command.

Description
  • This query returns all information under horizontal:fastframe.
Usage
  • Using the .query() method will send the HORizontal:FASTframe? query.
  • Using the .verify(value) method will send the HORizontal:FASTframe? query and raise an AssertionError if the returned value does not match value.
SCPI Syntax 
- HORizontal:FASTframe?
Sub-properties
  • .count: The HORizontal:FASTframe:COUNt command.
  • .maxframes: The HORizontal:FASTframe:MAXFRames command.
  • .multipleframes: The HORizontal:FASTframe:MULtipleframes command tree.
  • .ref: The HORizontal:FASTframe:REF command tree.
  • .selected: The HORizontal:FASTframe:SELECTED command.
  • .state: The HORizontal:FASTframe:STATE command.
  • .sumframe: The HORizontal:FASTframe:SUMFrame command.
  • .timestamp: The HORizontal:FASTframe:TIMEStamp command tree.
  • .xzero: The HORizontal:FASTframe:XZEro command tree.

history property 

history: HorizontalHistory

Return the HORizontal:HISTory command tree.

Usage
  • Using the .query() method will send the HORizontal:HISTory? query.
  • Using the .verify(value) method will send the HORizontal:HISTory? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .cstats: The HORizontal:HISTory:CSTAts command.
  • .overlay: The HORizontal:HISTory:OVERlay command.
  • .ref: The HORizontal:HISTory:REF command tree.
  • .selected: The HORizontal:HISTory:SELected command.
  • .state: The HORizontal:HISTory:STATe command.
  • .timestamp: The HORizontal:HISTory:TIMEStamp command tree.

main property 

main: HorizontalMain

Return the HORizontal:MAIn command tree.

Usage
  • Using the .query() method will send the HORizontal:MAIn? query.
  • Using the .verify(value) method will send the HORizontal:MAIn? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .interpratio: The HORizontal:MAIn:INTERPRatio command.

mode property 

mode: HorizontalMode

Return the HORizontal:MODe command.

Description
  • This command set or queries the horizontal operating mode.
Usage
  • Using the .query() method will send the HORizontal:MODe? query.
  • Using the .verify(value) method will send the HORizontal:MODe? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the HORizontal:MODe value command.
SCPI Syntax 
- HORizontal:MODe {AUTO|MANual}
- HORizontal:MODe?
Info
  • AUTO selects the automatic horizontal model. Auto mode automatically adjusts the sample rate and record length to provide a high acquisition rate in Fast Acq or signal fidelity in analysis. Record length is read only.
  • MANual selects the manual horizontal model. Manual mode lets you change the sample rate, horizontal scale, and record length. These values interact. For example, when you change record length then the horizontal scale also changes.
Sub-properties
  • .automatic: The HORizontal:MODe:AUTOmatic command tree.
  • .manual: The HORizontal:MODe:MANual command tree.
  • .recordlength: The HORizontal:MODe:RECOrdlength command.
  • .samplerate: The HORizontal:MODe:SAMPLERate command.
  • .scale: The HORizontal:MODe:SCAle command.

position property 

position: HorizontalPosition

Return the HORizontal:POSition command.

Description
  • This command sets or queries the horizontal position as a percent of screen width. When Horizontal Delay Mode is turned off, this command is equivalent to adjusting the HORIZONTAL POSITION knob on the front panel. When Horizontal Delay Mode is turned on, the horizontal position is forced to 50%.
Usage
  • Using the .query() method will send the HORizontal:POSition? query.
  • Using the .verify(value) method will send the HORizontal:POSition? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the HORizontal:POSition value command.
SCPI Syntax 
- HORizontal:POSition <NR3>
- HORizontal:POSition?
Info
  • <NR3> is from 0 to ≈100 and is the position of the trigger point on the screen (0 = left edge, 100 = right edge).

previewstate property 

previewstate: HorizontalPreviewstate

Return the HORizontal:PREViewstate command.

Description
  • This query returns the display system preview state.
Usage
  • Using the .query() method will send the HORizontal:PREViewstate? query.
  • Using the .verify(value) method will send the HORizontal:PREViewstate? query and raise an AssertionError if the returned value does not match value.
SCPI Syntax 
- HORizontal:PREViewstate?

recordlength property 

recordlength: HorizontalRecordlength

Return the HORizontal:RECOrdlength command.

Description
  • This command sets or queries the horizontal record length. To change the record length the Horizontal Mode must be set to Manual.
Usage
  • Using the .query() method will send the HORizontal:RECOrdlength? query.
  • Using the .verify(value) method will send the HORizontal:RECOrdlength? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the HORizontal:RECOrdlength value command.
SCPI Syntax 
- HORizontal:RECOrdlength <NR1>
- HORizontal:RECOrdlength?
Info
  • <NR1> is the horizontal record length.

roll property 

roll: HorizontalRoll

Return the HORizontal:ROLL command.

Description
  • Queries the horizontal roll mode status.
Usage
  • Using the .query() method will send the HORizontal:ROLL? query.
  • Using the .verify(value) method will send the HORizontal:ROLL? query and raise an AssertionError if the returned value does not match value.
SCPI Syntax 
- HORizontal:ROLL?

samplerate property 

samplerate: HorizontalSamplerate

Return the HORizontal:SAMPLERate command.

Description
  • This command sets or queries the horizontal sample rate.
Usage
  • Using the .query() method will send the HORizontal:SAMPLERate? query.
  • Using the .verify(value) method will send the HORizontal:SAMPLERate? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the HORizontal:SAMPLERate value command.
SCPI Syntax 
- HORizontal:SAMPLERate <NR3>
- HORizontal:SAMPLERate?
Info
  • <NR3> is the horizontal sample rate in samples per second.
Sub-properties
  • .analyzemode: The HORizontal:SAMPLERate:ANALYZemode command tree.

scale property 

scale: HorizontalScale

Return the HORizontal:SCAle command.

Description
  • This command sets or queries the horizontal scale.
Usage
  • Using the .query() method will send the HORizontal:SCAle? query.
  • Using the .verify(value) method will send the HORizontal:SCAle? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the HORizontal:SCAle value command.
SCPI Syntax 
- HORizontal:SCAle <NR3>
- HORizontal:SCAle?
Info
  • <NR3> is the horizontal scale in time per division.

HorizontalAcqduration

Bases: SCPICmdRead

The HORizontal:ACQDURATION command.

Description
  • This query returns the timebase duration.
Usage
  • Using the .query() method will send the HORizontal:ACQDURATION? query.
  • Using the .verify(value) method will send the HORizontal:ACQDURATION? query and raise an AssertionError if the returned value does not match value.
SCPI Syntax 
- HORizontal:ACQDURATION?

HorizontalDelay

Bases: SCPICmdRead

The HORizontal:DELay command tree.

Usage
  • Using the .query() method will send the HORizontal:DELay? query.
  • Using the .verify(value) method will send the HORizontal:DELay? query and raise an AssertionError if the returned value does not match value.
Properties
  • .mode: The HORizontal:DELay:MODe command.
  • .time: The HORizontal:DELay:TIMe command.

mode property 

mode: HorizontalDelayMode

Return the HORizontal:DELay:MODe command.

Description
  • This command sets or queries the horizontal delay mode.
Usage
  • Using the .query() method will send the HORizontal:DELay:MODe? query.
  • Using the .verify(value) method will send the HORizontal:DELay:MODe? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the HORizontal:DELay:MODe value command.
SCPI Syntax 
- HORizontal:DELay:MODe {ON|OFF|<NR1>}
- HORizontal:DELay:MODe?
Info
  • OFF sets the Horizontal Delay Mode to off. This causes the HORizontal:POSition command to operate like the HORIZONTAL POSITION knob on the front panel.
  • ON sets the Horizontal Delay Mode to on. This causes the HORizontal:DELay:TIMe command to operate like the HORIZONTAL POSITION knob on the front panel.
  • <NR1> = 0 sets the Horizontal Delay Mode to off; any other value sets this mode to on.

time property 

time: HorizontalDelayTime

Return the HORizontal:DELay:TIMe command.

Description
  • This command sets or queries the horizontal delay time that is used when delay mode is on.
Usage
  • Using the .query() method will send the HORizontal:DELay:TIMe? query.
  • Using the .verify(value) method will send the HORizontal:DELay:TIMe? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the HORizontal:DELay:TIMe value command.
SCPI Syntax 
- HORizontal:DELay:TIMe <NR3>
- HORizontal:DELay:TIMe?
Info
  • <NR3> is the delay in seconds.

HorizontalDelayMode

Bases: SCPICmdWrite, SCPICmdRead

The HORizontal:DELay:MODe command.

Description
  • This command sets or queries the horizontal delay mode.
Usage
  • Using the .query() method will send the HORizontal:DELay:MODe? query.
  • Using the .verify(value) method will send the HORizontal:DELay:MODe? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the HORizontal:DELay:MODe value command.
SCPI Syntax 
- HORizontal:DELay:MODe {ON|OFF|<NR1>}
- HORizontal:DELay:MODe?
Info
  • OFF sets the Horizontal Delay Mode to off. This causes the HORizontal:POSition command to operate like the HORIZONTAL POSITION knob on the front panel.
  • ON sets the Horizontal Delay Mode to on. This causes the HORizontal:DELay:TIMe command to operate like the HORIZONTAL POSITION knob on the front panel.
  • <NR1> = 0 sets the Horizontal Delay Mode to off; any other value sets this mode to on.

HorizontalDelayTime

Bases: SCPICmdWrite, SCPICmdRead

The HORizontal:DELay:TIMe command.

Description
  • This command sets or queries the horizontal delay time that is used when delay mode is on.
Usage
  • Using the .query() method will send the HORizontal:DELay:TIMe? query.
  • Using the .verify(value) method will send the HORizontal:DELay:TIMe? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the HORizontal:DELay:TIMe value command.
SCPI Syntax 
- HORizontal:DELay:TIMe <NR3>
- HORizontal:DELay:TIMe?
Info
  • <NR3> is the delay in seconds.

HorizontalDivisions

Bases: SCPICmdRead

The HORizontal:DIVisions command.

Description
  • This query-only command returns the number of graticule divisions.
Usage
  • Using the .query() method will send the HORizontal:DIVisions? query.
  • Using the .verify(value) method will send the HORizontal:DIVisions? query and raise an AssertionError if the returned value does not match value.
SCPI Syntax 
- HORizontal:DIVisions?

HorizontalFastframe

Bases: SCPICmdRead

The HORizontal:FASTframe command.

Description
  • This query returns all information under horizontal:fastframe.
Usage
  • Using the .query() method will send the HORizontal:FASTframe? query.
  • Using the .verify(value) method will send the HORizontal:FASTframe? query and raise an AssertionError if the returned value does not match value.
SCPI Syntax 
- HORizontal:FASTframe?
Properties
  • .count: The HORizontal:FASTframe:COUNt command.
  • .maxframes: The HORizontal:FASTframe:MAXFRames command.
  • .multipleframes: The HORizontal:FASTframe:MULtipleframes command tree.
  • .ref: The HORizontal:FASTframe:REF command tree.
  • .selected: The HORizontal:FASTframe:SELECTED command.
  • .state: The HORizontal:FASTframe:STATE command.
  • .sumframe: The HORizontal:FASTframe:SUMFrame command.
  • .timestamp: The HORizontal:FASTframe:TIMEStamp command tree.
  • .xzero: The HORizontal:FASTframe:XZEro command tree.

count property 

count: HorizontalFastframeCount

Return the HORizontal:FASTframe:COUNt command.

Description
  • This command sets or returns the number of frames.
Usage
  • Using the .query() method will send the HORizontal:FASTframe:COUNt? query.
  • Using the .verify(value) method will send the HORizontal:FASTframe:COUNt? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the HORizontal:FASTframe:COUNt value command.
SCPI Syntax 
- HORizontal:FASTframe:COUNt <NR1>
- HORizontal:FASTframe:COUNt?
Info
  • <NR1> is the number of frames.

maxframes property 

maxframes: HorizontalFastframeMaxframes

Return the HORizontal:FASTframe:MAXFRames command.

Description
  • This query returns the maximum number of frames.
Usage
  • Using the .query() method will send the HORizontal:FASTframe:MAXFRames? query.
  • Using the .verify(value) method will send the HORizontal:FASTframe:MAXFRames? query and raise an AssertionError if the returned value does not match value.
SCPI Syntax 
- HORizontal:FASTframe:MAXFRames?

multipleframes property 

multipleframes: HorizontalFastframeMultipleframes

Return the HORizontal:FASTframe:MULtipleframes command tree.

Usage
  • Using the .query() method will send the HORizontal:FASTframe:MULtipleframes? query.
  • Using the .verify(value) method will send the HORizontal:FASTframe:MULtipleframes? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .mode: The HORizontal:FASTframe:MULtipleframes:MODe command.

ref property 

ref: HorizontalFastframeRef

Return the HORizontal:FASTframe:REF command tree.

Usage
  • Using the .query() method will send the HORizontal:FASTframe:REF? query.
  • Using the .verify(value) method will send the HORizontal:FASTframe:REF? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .frame: The HORizontal:FASTframe:REF:FRAme command.
  • .include: The HORizontal:FASTframe:REF:INCLUde command.

selected property 

selected: HorizontalFastframeSelected

Return the HORizontal:FASTframe:SELECTED command.

Description
  • This command sets or returns the selected frame number for acquired frames. Refs have their own selected frames.
Usage
  • Using the .query() method will send the HORizontal:FASTframe:SELECTED? query.
  • Using the .verify(value) method will send the HORizontal:FASTframe:SELECTED? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the HORizontal:FASTframe:SELECTED value command.
SCPI Syntax 
- HORizontal:FASTframe:SELECTED <NR1>
- HORizontal:FASTframe:SELECTED?
Info
  • <NR1> is the selected frame number for acquired frames.

state property 

state: HorizontalFastframeState

Return the HORizontal:FASTframe:STATE command.

Description
  • This command sets or returns the state of FastFrame. Acquisition modes Envelope and Average are not compatible with FastFrame. If FastFrame is on, an attempted set to those acquisition modes will fail and revert to Sample mode. If FastFrame is turned on while in one of those acquisition modes, the acquisition mode is changed to Sample.
Usage
  • Using the .query() method will send the HORizontal:FASTframe:STATE? query.
  • Using the .verify(value) method will send the HORizontal:FASTframe:STATE? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the HORizontal:FASTframe:STATE value command.
SCPI Syntax 
- HORizontal:FASTframe:STATE {ON|OFF|<NR1>}
- HORizontal:FASTframe:STATE?
Info
  • ON indicates FastFrame is active.
  • OFF indicates that FastFrame is off.
  • <NR1> A 0 turns off FastFrame; any other value activates FastFrame.

sumframe property 

sumframe: HorizontalFastframeSumframe

Return the HORizontal:FASTframe:SUMFrame command.

Description
  • This command sets or returns the summary frame type. Turning on Summary Frame does not adjust the numberFrames value as long as there is room for an additional frame. If there is not enough room then numberFrames will be reduced by 1. The numberFrames value is always the number of frames to acquire.
Usage
  • Using the .query() method will send the HORizontal:FASTframe:SUMFrame? query.
  • Using the .verify(value) method will send the HORizontal:FASTframe:SUMFrame? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the HORizontal:FASTframe:SUMFrame value command.
SCPI Syntax 
- HORizontal:FASTframe:SUMFrame {NONe|AVErage|ENVelope}
- HORizontal:FASTframe:SUMFrame?
Info
  • NONe sets the Summary frame to off.
  • AVErage sets the Summary frame to average of all acquired frames.
  • ENVelope sets the Summary frame to envelope of all acquired frames.
Sub-properties
  • .state: The HORizontal:FASTframe:SUMFrame:STATE command.

timestamp property 

timestamp: HorizontalFastframeTimestamp

Return the HORizontal:FASTframe:TIMEStamp command tree.

Usage
  • Using the .query() method will send the HORizontal:FASTframe:TIMEStamp? query.
  • Using the .verify(value) method will send the HORizontal:FASTframe:TIMEStamp? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .all: The HORizontal:FASTframe:TIMEStamp:ALL command.
  • .delta: The HORizontal:FASTframe:TIMEStamp:DELTa command.
  • .reference: The HORizontal:FASTframe:TIMEStamp:REFerence command.
  • .selected: The HORizontal:FASTframe:TIMEStamp:SELECTED command.

xzero property 

xzero: HorizontalFastframeXzero

Return the HORizontal:FASTframe:XZEro command tree.

Usage
  • Using the .query() method will send the HORizontal:FASTframe:XZEro? query.
  • Using the .verify(value) method will send the HORizontal:FASTframe:XZEro? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .all: The HORizontal:FASTframe:XZEro:ALL command.
  • .ref: The HORizontal:FASTframe:XZEro:REF command.
  • .selected: The HORizontal:FASTframe:XZEro:SELECTED command.

HorizontalFastframeCount

Bases: SCPICmdWrite, SCPICmdRead

The HORizontal:FASTframe:COUNt command.

Description
  • This command sets or returns the number of frames.
Usage
  • Using the .query() method will send the HORizontal:FASTframe:COUNt? query.
  • Using the .verify(value) method will send the HORizontal:FASTframe:COUNt? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the HORizontal:FASTframe:COUNt value command.
SCPI Syntax 
- HORizontal:FASTframe:COUNt <NR1>
- HORizontal:FASTframe:COUNt?
Info
  • <NR1> is the number of frames.

HorizontalFastframeMaxframes

Bases: SCPICmdRead

The HORizontal:FASTframe:MAXFRames command.

Description
  • This query returns the maximum number of frames.
Usage
  • Using the .query() method will send the HORizontal:FASTframe:MAXFRames? query.
  • Using the .verify(value) method will send the HORizontal:FASTframe:MAXFRames? query and raise an AssertionError if the returned value does not match value.
SCPI Syntax 
- HORizontal:FASTframe:MAXFRames?

HorizontalFastframeMultipleframes

Bases: SCPICmdRead

The HORizontal:FASTframe:MULtipleframes command tree.

Usage
  • Using the .query() method will send the HORizontal:FASTframe:MULtipleframes? query.
  • Using the .verify(value) method will send the HORizontal:FASTframe:MULtipleframes? query and raise an AssertionError if the returned value does not match value.
Properties
  • .mode: The HORizontal:FASTframe:MULtipleframes:MODe command.

mode property 

mode: HorizontalFastframeMultipleframesMode

Return the HORizontal:FASTframe:MULtipleframes:MODe command.

Description
  • This command sets or returns the overlay display type.
Usage
  • Using the .query() method will send the HORizontal:FASTframe:MULtipleframes:MODe? query.
  • Using the .verify(value) method will send the HORizontal:FASTframe:MULtipleframes:MODe? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the HORizontal:FASTframe:MULtipleframes:MODe value command.
SCPI Syntax 
- HORizontal:FASTframe:MULtipleframes:MODe {OFF|OVERlay}
- HORizontal:FASTframe:MULtipleframes:MODe?
Info
  • OFF specifies only displaying the selected frame.
  • OVERlay specifies overlaying all frames with the temperature palette. The summary frame is not included in the overlay. The selected frame is drawn in blue on top of all other frames.

HorizontalFastframeMultipleframesMode

Bases: SCPICmdWrite, SCPICmdRead

The HORizontal:FASTframe:MULtipleframes:MODe command.

Description
  • This command sets or returns the overlay display type.
Usage
  • Using the .query() method will send the HORizontal:FASTframe:MULtipleframes:MODe? query.
  • Using the .verify(value) method will send the HORizontal:FASTframe:MULtipleframes:MODe? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the HORizontal:FASTframe:MULtipleframes:MODe value command.
SCPI Syntax 
- HORizontal:FASTframe:MULtipleframes:MODe {OFF|OVERlay}
- HORizontal:FASTframe:MULtipleframes:MODe?
Info
  • OFF specifies only displaying the selected frame.
  • OVERlay specifies overlaying all frames with the temperature palette. The summary frame is not included in the overlay. The selected frame is drawn in blue on top of all other frames.

HorizontalFastframeRef

Bases: SCPICmdRead

The HORizontal:FASTframe:REF command tree.

Usage
  • Using the .query() method will send the HORizontal:FASTframe:REF? query.
  • Using the .verify(value) method will send the HORizontal:FASTframe:REF? query and raise an AssertionError if the returned value does not match value.
Properties
  • .frame: The HORizontal:FASTframe:REF:FRAme command.
  • .include: The HORizontal:FASTframe:REF:INCLUde command.

frame property 

frame: HorizontalFastframeRefFrame

Return the HORizontal:FASTframe:REF:FRAme command.

Description
  • This command sets or returns the reference frame number.
Usage
  • Using the .query() method will send the HORizontal:FASTframe:REF:FRAme? query.
  • Using the .verify(value) method will send the HORizontal:FASTframe:REF:FRAme? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the HORizontal:FASTframe:REF:FRAme value command.
SCPI Syntax 
- HORizontal:FASTframe:REF:FRAme <NR1>
- HORizontal:FASTframe:REF:FRAme?
Info
  • <NR1> is the reference frame number.

include property 

include: HorizontalFastframeRefInclude

Return the HORizontal:FASTframe:REF:INCLUde command.

Description
  • This command sets or returns whether the reference frame delta information is shown in the display.
Usage
  • Using the .query() method will send the HORizontal:FASTframe:REF:INCLUde? query.
  • Using the .verify(value) method will send the HORizontal:FASTframe:REF:INCLUde? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the HORizontal:FASTframe:REF:INCLUde value command.
SCPI Syntax 
- HORizontal:FASTframe:REF:INCLUde {ON|OFF|<NR1>}
- HORizontal:FASTframe:REF:INCLUde?
Info
  • ON displays the delta information.
  • OFF does not display the delta information.
  • <NR1> a 0 indicates the delta information is off; any other value displays the delta information.

HorizontalFastframeRefFrame

Bases: SCPICmdWrite, SCPICmdRead

The HORizontal:FASTframe:REF:FRAme command.

Description
  • This command sets or returns the reference frame number.
Usage
  • Using the .query() method will send the HORizontal:FASTframe:REF:FRAme? query.
  • Using the .verify(value) method will send the HORizontal:FASTframe:REF:FRAme? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the HORizontal:FASTframe:REF:FRAme value command.
SCPI Syntax 
- HORizontal:FASTframe:REF:FRAme <NR1>
- HORizontal:FASTframe:REF:FRAme?
Info
  • <NR1> is the reference frame number.

HorizontalFastframeRefInclude

Bases: SCPICmdWrite, SCPICmdRead

The HORizontal:FASTframe:REF:INCLUde command.

Description
  • This command sets or returns whether the reference frame delta information is shown in the display.
Usage
  • Using the .query() method will send the HORizontal:FASTframe:REF:INCLUde? query.
  • Using the .verify(value) method will send the HORizontal:FASTframe:REF:INCLUde? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the HORizontal:FASTframe:REF:INCLUde value command.
SCPI Syntax 
- HORizontal:FASTframe:REF:INCLUde {ON|OFF|<NR1>}
- HORizontal:FASTframe:REF:INCLUde?
Info
  • ON displays the delta information.
  • OFF does not display the delta information.
  • <NR1> a 0 indicates the delta information is off; any other value displays the delta information.

HorizontalFastframeSelected

Bases: SCPICmdWrite, SCPICmdRead

The HORizontal:FASTframe:SELECTED command.

Description
  • This command sets or returns the selected frame number for acquired frames. Refs have their own selected frames.
Usage
  • Using the .query() method will send the HORizontal:FASTframe:SELECTED? query.
  • Using the .verify(value) method will send the HORizontal:FASTframe:SELECTED? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the HORizontal:FASTframe:SELECTED value command.
SCPI Syntax 
- HORizontal:FASTframe:SELECTED <NR1>
- HORizontal:FASTframe:SELECTED?
Info
  • <NR1> is the selected frame number for acquired frames.

HorizontalFastframeState

Bases: SCPICmdWrite, SCPICmdRead

The HORizontal:FASTframe:STATE command.

Description
  • This command sets or returns the state of FastFrame. Acquisition modes Envelope and Average are not compatible with FastFrame. If FastFrame is on, an attempted set to those acquisition modes will fail and revert to Sample mode. If FastFrame is turned on while in one of those acquisition modes, the acquisition mode is changed to Sample.
Usage
  • Using the .query() method will send the HORizontal:FASTframe:STATE? query.
  • Using the .verify(value) method will send the HORizontal:FASTframe:STATE? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the HORizontal:FASTframe:STATE value command.
SCPI Syntax 
- HORizontal:FASTframe:STATE {ON|OFF|<NR1>}
- HORizontal:FASTframe:STATE?
Info
  • ON indicates FastFrame is active.
  • OFF indicates that FastFrame is off.
  • <NR1> A 0 turns off FastFrame; any other value activates FastFrame.

HorizontalFastframeSumframe

Bases: SCPICmdWrite, SCPICmdRead

The HORizontal:FASTframe:SUMFrame command.

Description
  • This command sets or returns the summary frame type. Turning on Summary Frame does not adjust the numberFrames value as long as there is room for an additional frame. If there is not enough room then numberFrames will be reduced by 1. The numberFrames value is always the number of frames to acquire.
Usage
  • Using the .query() method will send the HORizontal:FASTframe:SUMFrame? query.
  • Using the .verify(value) method will send the HORizontal:FASTframe:SUMFrame? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the HORizontal:FASTframe:SUMFrame value command.
SCPI Syntax 
- HORizontal:FASTframe:SUMFrame {NONe|AVErage|ENVelope}
- HORizontal:FASTframe:SUMFrame?
Info
  • NONe sets the Summary frame to off.
  • AVErage sets the Summary frame to average of all acquired frames.
  • ENVelope sets the Summary frame to envelope of all acquired frames.
Properties
  • .state: The HORizontal:FASTframe:SUMFrame:STATE command.

state property 

state: HorizontalFastframeSumframeState

Return the HORizontal:FASTframe:SUMFrame:STATE command.

Description
  • This command sets or returns the state of FastFrame summary frame. Summary frame mode is set automatically based on the acquisition mode. When in Sample mode, the summary frame type is set to Average. When in Peak Detect mode, the summary frame type is set to Envelope. When in High Res mode, the summary frame type is set to Average.
Usage
  • Using the .query() method will send the HORizontal:FASTframe:SUMFrame:STATE? query.
  • Using the .verify(value) method will send the HORizontal:FASTframe:SUMFrame:STATE? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the HORizontal:FASTframe:SUMFrame:STATE value command.
SCPI Syntax 
- HORizontal:FASTframe:SUMFrame:STATE {ON|OFF|<NR1>}
- HORizontal:FASTframe:SUMFrame:STATE?
Info
  • ON indicates summary frame is active.
  • OFF indicates that summary frame is off.
  • <NR1> a 0 turns off summary frame; any other value activates the summary frame.

HorizontalFastframeSumframeState

Bases: SCPICmdWrite, SCPICmdRead

The HORizontal:FASTframe:SUMFrame:STATE command.

Description
  • This command sets or returns the state of FastFrame summary frame. Summary frame mode is set automatically based on the acquisition mode. When in Sample mode, the summary frame type is set to Average. When in Peak Detect mode, the summary frame type is set to Envelope. When in High Res mode, the summary frame type is set to Average.
Usage
  • Using the .query() method will send the HORizontal:FASTframe:SUMFrame:STATE? query.
  • Using the .verify(value) method will send the HORizontal:FASTframe:SUMFrame:STATE? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the HORizontal:FASTframe:SUMFrame:STATE value command.
SCPI Syntax 
- HORizontal:FASTframe:SUMFrame:STATE {ON|OFF|<NR1>}
- HORizontal:FASTframe:SUMFrame:STATE?
Info
  • ON indicates summary frame is active.
  • OFF indicates that summary frame is off.
  • <NR1> a 0 turns off summary frame; any other value activates the summary frame.

HorizontalFastframeTimestamp

Bases: SCPICmdRead

The HORizontal:FASTframe:TIMEStamp command tree.

Usage
  • Using the .query() method will send the HORizontal:FASTframe:TIMEStamp? query.
  • Using the .verify(value) method will send the HORizontal:FASTframe:TIMEStamp? query and raise an AssertionError if the returned value does not match value.
Properties
  • .all: The HORizontal:FASTframe:TIMEStamp:ALL command.
  • .delta: The HORizontal:FASTframe:TIMEStamp:DELTa command.
  • .reference: The HORizontal:FASTframe:TIMEStamp:REFerence command.
  • .selected: The HORizontal:FASTframe:TIMEStamp:SELECTED command.

all property 

all: HorizontalFastframeTimestampAll

Return the HORizontal:FASTframe:TIMEStamp:ALL command.

Description
  • This query-only command returns the time stamp of all frames. The format is (Frame #: TimeStamp, Frame #: TimeStamp, and so on). Each time-stamp string is of the form DD.MM.YYYY.HH:MM::SS.xxxxxxxxxxxx.
Usage
  • Using the .query() method will send the HORizontal:FASTframe:TIMEStamp:ALL? query.
  • Using the .verify(value) method will send the HORizontal:FASTframe:TIMEStamp:ALL? query and raise an AssertionError if the returned value does not match value.
SCPI Syntax 
- HORizontal:FASTframe:TIMEStamp:ALL?

delta property 

delta: HorizontalFastframeTimestampDelta

Return the HORizontal:FASTframe:TIMEStamp:DELTa command.

Description
  • This query returns the time difference between the Selected and Reference time-stamps.
Usage
  • Using the .query() method will send the HORizontal:FASTframe:TIMEStamp:DELTa? query.
  • Using the .verify(value) method will send the HORizontal:FASTframe:TIMEStamp:DELTa? query and raise an AssertionError if the returned value does not match value.
SCPI Syntax 
- HORizontal:FASTframe:TIMEStamp:DELTa?

reference property 

reference: HorizontalFastframeTimestampReference

Return the HORizontal:FASTframe:TIMEStamp:REFerence command.

Description
  • This query returns the time-stamp of the FastFrame Reference frame.
Usage
  • Using the .query() method will send the HORizontal:FASTframe:TIMEStamp:REFerence? query.
  • Using the .verify(value) method will send the HORizontal:FASTframe:TIMEStamp:REFerence? query and raise an AssertionError if the returned value does not match value.
SCPI Syntax 
- HORizontal:FASTframe:TIMEStamp:REFerence?
Info
  • ON indicates summary frame is active.
  • OFF indicates that summary frame is off.
  • <NR1> a 0 turns off summary frame; any other value activates the summary frame.

selected property 

selected: HorizontalFastframeTimestampSelected

Return the HORizontal:FASTframe:TIMEStamp:SELECTED command.

Description
  • This query returns the time-stamp of the FastFrame Selected acquired frame.
Usage
  • Using the .query() method will send the HORizontal:FASTframe:TIMEStamp:SELECTED? query.
  • Using the .verify(value) method will send the HORizontal:FASTframe:TIMEStamp:SELECTED? query and raise an AssertionError if the returned value does not match value.
SCPI Syntax 
- HORizontal:FASTframe:TIMEStamp:SELECTED?

HorizontalFastframeTimestampAll

Bases: SCPICmdRead

The HORizontal:FASTframe:TIMEStamp:ALL command.

Description
  • This query-only command returns the time stamp of all frames. The format is (Frame #: TimeStamp, Frame #: TimeStamp, and so on). Each time-stamp string is of the form DD.MM.YYYY.HH:MM::SS.xxxxxxxxxxxx.
Usage
  • Using the .query() method will send the HORizontal:FASTframe:TIMEStamp:ALL? query.
  • Using the .verify(value) method will send the HORizontal:FASTframe:TIMEStamp:ALL? query and raise an AssertionError if the returned value does not match value.
SCPI Syntax 
- HORizontal:FASTframe:TIMEStamp:ALL?

HorizontalFastframeTimestampDelta

Bases: SCPICmdRead

The HORizontal:FASTframe:TIMEStamp:DELTa command.

Description
  • This query returns the time difference between the Selected and Reference time-stamps.
Usage
  • Using the .query() method will send the HORizontal:FASTframe:TIMEStamp:DELTa? query.
  • Using the .verify(value) method will send the HORizontal:FASTframe:TIMEStamp:DELTa? query and raise an AssertionError if the returned value does not match value.
SCPI Syntax 
- HORizontal:FASTframe:TIMEStamp:DELTa?

HorizontalFastframeTimestampReference

Bases: SCPICmdRead

The HORizontal:FASTframe:TIMEStamp:REFerence command.

Description
  • This query returns the time-stamp of the FastFrame Reference frame.
Usage
  • Using the .query() method will send the HORizontal:FASTframe:TIMEStamp:REFerence? query.
  • Using the .verify(value) method will send the HORizontal:FASTframe:TIMEStamp:REFerence? query and raise an AssertionError if the returned value does not match value.
SCPI Syntax 
- HORizontal:FASTframe:TIMEStamp:REFerence?
Info
  • ON indicates summary frame is active.
  • OFF indicates that summary frame is off.
  • <NR1> a 0 turns off summary frame; any other value activates the summary frame.

HorizontalFastframeTimestampSelected

Bases: SCPICmdRead

The HORizontal:FASTframe:TIMEStamp:SELECTED command.

Description
  • This query returns the time-stamp of the FastFrame Selected acquired frame.
Usage
  • Using the .query() method will send the HORizontal:FASTframe:TIMEStamp:SELECTED? query.
  • Using the .verify(value) method will send the HORizontal:FASTframe:TIMEStamp:SELECTED? query and raise an AssertionError if the returned value does not match value.
SCPI Syntax 
- HORizontal:FASTframe:TIMEStamp:SELECTED?

HorizontalFastframeXzero

Bases: SCPICmdRead

The HORizontal:FASTframe:XZEro command tree.

Usage
  • Using the .query() method will send the HORizontal:FASTframe:XZEro? query.
  • Using the .verify(value) method will send the HORizontal:FASTframe:XZEro? query and raise an AssertionError if the returned value does not match value.
Properties
  • .all: The HORizontal:FASTframe:XZEro:ALL command.
  • .ref: The HORizontal:FASTframe:XZEro:REF command.
  • .selected: The HORizontal:FASTframe:XZEro:SELECTED command.

all property 

all: HorizontalFastframeXzeroAll

Return the HORizontal:FASTframe:XZEro:ALL command.

Description
  • This query-only command returns the sub-sample time between the trigger sample (designated by PT_OFF) and the occurrence of the actual trigger for the waveform specified by the DATa:SOUrce command for all frames. This value is in units of WFMOutpre:XUNit. The format is a string of the form (frame #:zxero, frame #:xzero, and so on).
Usage
  • Using the .query() method will send the HORizontal:FASTframe:XZEro:ALL? query.
  • Using the .verify(value) method will send the HORizontal:FASTframe:XZEro:ALL? query and raise an AssertionError if the returned value does not match value.
SCPI Syntax 
- HORizontal:FASTframe:XZEro:ALL?

ref property 

ref: HorizontalFastframeXzeroRef

Return the HORizontal:FASTframe:XZEro:REF command.

Description
  • This query-only command returns the sub-sample time between the trigger sample (designated by PT_OFF) and the occurrence of the actual trigger for the waveform specified by the DATa:SOUrce command for the reference frame. This value is in units of WFMOutpre:XUNit.
Usage
  • Using the .query() method will send the HORizontal:FASTframe:XZEro:REF? query.
  • Using the .verify(value) method will send the HORizontal:FASTframe:XZEro:REF? query and raise an AssertionError if the returned value does not match value.
SCPI Syntax 
- HORizontal:FASTframe:XZEro:REF?

selected property 

selected: HorizontalFastframeXzeroSelected

Return the HORizontal:FASTframe:XZEro:SELECTED command.

Description
  • This query-only command returns the sub-sample time between the trigger sample (designated by PT_OFF) and the occurrence of the actual trigger for the waveform specified by the DATa:SOUrce command for the selected frame. This value is in units of WFMOutpre:XUNit.
Usage
  • Using the .query() method will send the HORizontal:FASTframe:XZEro:SELECTED? query.
  • Using the .verify(value) method will send the HORizontal:FASTframe:XZEro:SELECTED? query and raise an AssertionError if the returned value does not match value.
SCPI Syntax 
- HORizontal:FASTframe:XZEro:SELECTED?

HorizontalFastframeXzeroAll

Bases: SCPICmdRead

The HORizontal:FASTframe:XZEro:ALL command.

Description
  • This query-only command returns the sub-sample time between the trigger sample (designated by PT_OFF) and the occurrence of the actual trigger for the waveform specified by the DATa:SOUrce command for all frames. This value is in units of WFMOutpre:XUNit. The format is a string of the form (frame #:zxero, frame #:xzero, and so on).
Usage
  • Using the .query() method will send the HORizontal:FASTframe:XZEro:ALL? query.
  • Using the .verify(value) method will send the HORizontal:FASTframe:XZEro:ALL? query and raise an AssertionError if the returned value does not match value.
SCPI Syntax 
- HORizontal:FASTframe:XZEro:ALL?

HorizontalFastframeXzeroRef

Bases: SCPICmdRead

The HORizontal:FASTframe:XZEro:REF command.

Description
  • This query-only command returns the sub-sample time between the trigger sample (designated by PT_OFF) and the occurrence of the actual trigger for the waveform specified by the DATa:SOUrce command for the reference frame. This value is in units of WFMOutpre:XUNit.
Usage
  • Using the .query() method will send the HORizontal:FASTframe:XZEro:REF? query.
  • Using the .verify(value) method will send the HORizontal:FASTframe:XZEro:REF? query and raise an AssertionError if the returned value does not match value.
SCPI Syntax 
- HORizontal:FASTframe:XZEro:REF?

HorizontalFastframeXzeroSelected

Bases: SCPICmdRead

The HORizontal:FASTframe:XZEro:SELECTED command.

Description
  • This query-only command returns the sub-sample time between the trigger sample (designated by PT_OFF) and the occurrence of the actual trigger for the waveform specified by the DATa:SOUrce command for the selected frame. This value is in units of WFMOutpre:XUNit.
Usage
  • Using the .query() method will send the HORizontal:FASTframe:XZEro:SELECTED? query.
  • Using the .verify(value) method will send the HORizontal:FASTframe:XZEro:SELECTED? query and raise an AssertionError if the returned value does not match value.
SCPI Syntax 
- HORizontal:FASTframe:XZEro:SELECTED?

HorizontalHistory

Bases: SCPICmdRead

The HORizontal:HISTory command tree.

Usage
  • Using the .query() method will send the HORizontal:HISTory? query.
  • Using the .verify(value) method will send the HORizontal:HISTory? query and raise an AssertionError if the returned value does not match value.
Properties
  • .cstats: The HORizontal:HISTory:CSTAts command.
  • .overlay: The HORizontal:HISTory:OVERlay command.
  • .ref: The HORizontal:HISTory:REF command tree.
  • .selected: The HORizontal:HISTory:SELected command.
  • .state: The HORizontal:HISTory:STATe command.
  • .timestamp: The HORizontal:HISTory:TIMEStamp command tree.

cstats property 

cstats: HorizontalHistoryCstats

Return the HORizontal:HISTory:CSTAts command.

Description
  • This command sets or returns the history cumulative statistics type. When in All Acquisitions mode, statistics and plots reflect all acquisitions since the scope began acquiring. This may include results from acquisitions that go further back in time than those captured in history. When in History Only mode, statistics and plots only include acquisitions in history. The cumulative statistics type is set to All Acquisitions by default.
Usage
  • Using the .query() method will send the HORizontal:HISTory:CSTAts? query.
  • Using the .verify(value) method will send the HORizontal:HISTory:CSTAts? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the HORizontal:HISTory:CSTAts value command.
SCPI Syntax 
- HORizontal:HISTory:CSTAts {AACQs|HONLy}
- HORizontal:HISTory:CSTAts?
Info
  • AACQs sets the history cumulative statistics type to all acquisitions.
  • HONLy sets the history cumulative statistics type to history only.

overlay property 

overlay: HorizontalHistoryOverlay

Return the HORizontal:HISTory:OVERlay command.

Description
  • This command sets or returns whether all acquisitions in history are overlaid in the waveform view.
Usage
  • Using the .query() method will send the HORizontal:HISTory:OVERlay? query.
  • Using the .verify(value) method will send the HORizontal:HISTory:OVERlay? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the HORizontal:HISTory:OVERlay value command.
SCPI Syntax 
- HORizontal:HISTory:OVERlay {ON|OFF}
- HORizontal:HISTory:OVERlay?
Info
  • ON overlays all acquisitions in history in the waveform view.
  • OFF only shows the current acquisition in the waveform view.

ref property 

ref: HorizontalHistoryRef

Return the HORizontal:HISTory:REF command tree.

Usage
  • Using the .query() method will send the HORizontal:HISTory:REF? query.
  • Using the .verify(value) method will send the HORizontal:HISTory:REF? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .acq: The HORizontal:HISTory:REF:ACQ command.
  • .include: The HORizontal:HISTory:REF:INClude command.

selected property 

selected: HorizontalHistorySelected

Return the HORizontal:HISTory:SELected command.

Description
  • This command sets or queries the selected acquisition in History. By default this is the most recent acquisition in History.
Usage
  • Using the .query() method will send the HORizontal:HISTory:SELected? query.
  • Using the .verify(value) method will send the HORizontal:HISTory:SELected? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the HORizontal:HISTory:SELected value command.
SCPI Syntax 
- HORizontal:HISTory:SELected <NR1>
- HORizontal:HISTory:SELected?
Info
  • <NR1> is the acquisition number to set. Must be between 1 and the total number of acquisitions in History.

state property 

state: HorizontalHistoryState

Return the HORizontal:HISTory:STATe command.

Description
  • This command sets or returns the state of History. Acquisition modes Peak Detect, Envelope and Average are not compatible with History. If History is on, an attempted set to those acquisition modes will fail and revert to Sample mode. If History is turned on while in one of those acquisition modes, the acquisition mode is changed to Sample.
Usage
  • Using the .query() method will send the HORizontal:HISTory:STATe? query.
  • Using the .verify(value) method will send the HORizontal:HISTory:STATe? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the HORizontal:HISTory:STATe value command.
SCPI Syntax 
- HORizontal:HISTory:STATe {ON|OFF|1|0}
- HORizontal:HISTory:STATe?
Info
  • ON enables History.
  • OFF disables History.
  • 1 enables History.
  • 0 disables History; any other number value turns this feature on.

timestamp property 

timestamp: HorizontalHistoryTimestamp

Return the HORizontal:HISTory:TIMEStamp command tree.

Usage
  • Using the .query() method will send the HORizontal:HISTory:TIMEStamp? query.
  • Using the .verify(value) method will send the HORizontal:HISTory:TIMEStamp? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .delta: The HORizontal:HISTory:TIMEStamp:DELTa command.
  • .reference: The HORizontal:HISTory:TIMEStamp:REFerence command.
  • .selected: The HORizontal:HISTory:TIMEStamp:SELECTED command.

HorizontalHistoryCstats

Bases: SCPICmdWrite, SCPICmdRead

The HORizontal:HISTory:CSTAts command.

Description
  • This command sets or returns the history cumulative statistics type. When in All Acquisitions mode, statistics and plots reflect all acquisitions since the scope began acquiring. This may include results from acquisitions that go further back in time than those captured in history. When in History Only mode, statistics and plots only include acquisitions in history. The cumulative statistics type is set to All Acquisitions by default.
Usage
  • Using the .query() method will send the HORizontal:HISTory:CSTAts? query.
  • Using the .verify(value) method will send the HORizontal:HISTory:CSTAts? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the HORizontal:HISTory:CSTAts value command.
SCPI Syntax 
- HORizontal:HISTory:CSTAts {AACQs|HONLy}
- HORizontal:HISTory:CSTAts?
Info
  • AACQs sets the history cumulative statistics type to all acquisitions.
  • HONLy sets the history cumulative statistics type to history only.

HorizontalHistoryOverlay

Bases: SCPICmdWrite, SCPICmdRead

The HORizontal:HISTory:OVERlay command.

Description
  • This command sets or returns whether all acquisitions in history are overlaid in the waveform view.
Usage
  • Using the .query() method will send the HORizontal:HISTory:OVERlay? query.
  • Using the .verify(value) method will send the HORizontal:HISTory:OVERlay? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the HORizontal:HISTory:OVERlay value command.
SCPI Syntax 
- HORizontal:HISTory:OVERlay {ON|OFF}
- HORizontal:HISTory:OVERlay?
Info
  • ON overlays all acquisitions in history in the waveform view.
  • OFF only shows the current acquisition in the waveform view.

HorizontalHistoryRef

Bases: SCPICmdRead

The HORizontal:HISTory:REF command tree.

Usage
  • Using the .query() method will send the HORizontal:HISTory:REF? query.
  • Using the .verify(value) method will send the HORizontal:HISTory:REF? query and raise an AssertionError if the returned value does not match value.
Properties
  • .acq: The HORizontal:HISTory:REF:ACQ command.
  • .include: The HORizontal:HISTory:REF:INClude command.

acq property 

acq: HorizontalHistoryRefAcq

Return the HORizontal:HISTory:REF:ACQ command.

Description
  • This command sets or queries the reference acquisition in History. By default this is the first acquisition in History.
Usage
  • Using the .query() method will send the HORizontal:HISTory:REF:ACQ? query.
  • Using the .verify(value) method will send the HORizontal:HISTory:REF:ACQ? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the HORizontal:HISTory:REF:ACQ value command.
SCPI Syntax 
- HORizontal:HISTory:REF:ACQ <NR1>
- HORizontal:HISTory:REF:ACQ?
Info
  • <NR1> is the acquisition number to set. Must be between 1 and the total number of acquisitions in History.

include property 

include: HorizontalHistoryRefInclude

Return the HORizontal:HISTory:REF:INClude command.

Description
  • This command sets or returns whether the history reference acquisition is included in the user interface history badge or not.
Usage
  • Using the .query() method will send the HORizontal:HISTory:REF:INClude? query.
  • Using the .verify(value) method will send the HORizontal:HISTory:REF:INClude? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the HORizontal:HISTory:REF:INClude value command.
SCPI Syntax 
- HORizontal:HISTory:REF:INClude {ON|OFF}
- HORizontal:HISTory:REF:INClude?
Info
  • ON includes the reference acquisition.
  • OFF does not include the reference acquisition.

HorizontalHistoryRefAcq

Bases: SCPICmdWrite, SCPICmdRead

The HORizontal:HISTory:REF:ACQ command.

Description
  • This command sets or queries the reference acquisition in History. By default this is the first acquisition in History.
Usage
  • Using the .query() method will send the HORizontal:HISTory:REF:ACQ? query.
  • Using the .verify(value) method will send the HORizontal:HISTory:REF:ACQ? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the HORizontal:HISTory:REF:ACQ value command.
SCPI Syntax 
- HORizontal:HISTory:REF:ACQ <NR1>
- HORizontal:HISTory:REF:ACQ?
Info
  • <NR1> is the acquisition number to set. Must be between 1 and the total number of acquisitions in History.

HorizontalHistoryRefInclude

Bases: SCPICmdWrite, SCPICmdRead

The HORizontal:HISTory:REF:INClude command.

Description
  • This command sets or returns whether the history reference acquisition is included in the user interface history badge or not.
Usage
  • Using the .query() method will send the HORizontal:HISTory:REF:INClude? query.
  • Using the .verify(value) method will send the HORizontal:HISTory:REF:INClude? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the HORizontal:HISTory:REF:INClude value command.
SCPI Syntax 
- HORizontal:HISTory:REF:INClude {ON|OFF}
- HORizontal:HISTory:REF:INClude?
Info
  • ON includes the reference acquisition.
  • OFF does not include the reference acquisition.

HorizontalHistorySelected

Bases: SCPICmdWrite, SCPICmdRead

The HORizontal:HISTory:SELected command.

Description
  • This command sets or queries the selected acquisition in History. By default this is the most recent acquisition in History.
Usage
  • Using the .query() method will send the HORizontal:HISTory:SELected? query.
  • Using the .verify(value) method will send the HORizontal:HISTory:SELected? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the HORizontal:HISTory:SELected value command.
SCPI Syntax 
- HORizontal:HISTory:SELected <NR1>
- HORizontal:HISTory:SELected?
Info
  • <NR1> is the acquisition number to set. Must be between 1 and the total number of acquisitions in History.

HorizontalHistoryState

Bases: SCPICmdWrite, SCPICmdRead

The HORizontal:HISTory:STATe command.

Description
  • This command sets or returns the state of History. Acquisition modes Peak Detect, Envelope and Average are not compatible with History. If History is on, an attempted set to those acquisition modes will fail and revert to Sample mode. If History is turned on while in one of those acquisition modes, the acquisition mode is changed to Sample.
Usage
  • Using the .query() method will send the HORizontal:HISTory:STATe? query.
  • Using the .verify(value) method will send the HORizontal:HISTory:STATe? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the HORizontal:HISTory:STATe value command.
SCPI Syntax 
- HORizontal:HISTory:STATe {ON|OFF|1|0}
- HORizontal:HISTory:STATe?
Info
  • ON enables History.
  • OFF disables History.
  • 1 enables History.
  • 0 disables History; any other number value turns this feature on.

HorizontalHistoryTimestamp

Bases: SCPICmdRead

The HORizontal:HISTory:TIMEStamp command tree.

Usage
  • Using the .query() method will send the HORizontal:HISTory:TIMEStamp? query.
  • Using the .verify(value) method will send the HORizontal:HISTory:TIMEStamp? query and raise an AssertionError if the returned value does not match value.
Properties
  • .delta: The HORizontal:HISTory:TIMEStamp:DELTa command.
  • .reference: The HORizontal:HISTory:TIMEStamp:REFerence command.
  • .selected: The HORizontal:HISTory:TIMEStamp:SELECTED command.

delta property 

delta: HorizontalHistoryTimestampDelta

Return the HORizontal:HISTory:TIMEStamp:DELTa command.

Description
  • This query-only command returns the difference between the timestamps of the history reference acquisition and the history selected acquisition.
Usage
  • Using the .query() method will send the HORizontal:HISTory:TIMEStamp:DELTa? query.
  • Using the .verify(value) method will send the HORizontal:HISTory:TIMEStamp:DELTa? query and raise an AssertionError if the returned value does not match value.
SCPI Syntax 
- HORizontal:HISTory:TIMEStamp:DELTa?

reference property 

reference: HorizontalHistoryTimestampReference

Return the HORizontal:HISTory:TIMEStamp:REFerence command.

Description
  • This query-only command returns the timestamp of the history reference acquisition.
Usage
  • Using the .query() method will send the HORizontal:HISTory:TIMEStamp:REFerence? query.
  • Using the .verify(value) method will send the HORizontal:HISTory:TIMEStamp:REFerence? query and raise an AssertionError if the returned value does not match value.
SCPI Syntax 
- HORizontal:HISTory:TIMEStamp:REFerence?

selected property 

selected: HorizontalHistoryTimestampSelected

Return the HORizontal:HISTory:TIMEStamp:SELECTED command.

Description
  • This query-only command returns the timestamp of the history selected acquisition.
Usage
  • Using the .query() method will send the HORizontal:HISTory:TIMEStamp:SELECTED? query.
  • Using the .verify(value) method will send the HORizontal:HISTory:TIMEStamp:SELECTED? query and raise an AssertionError if the returned value does not match value.
SCPI Syntax 
- HORizontal:HISTory:TIMEStamp:SELECTED?

HorizontalHistoryTimestampDelta

Bases: SCPICmdRead

The HORizontal:HISTory:TIMEStamp:DELTa command.

Description
  • This query-only command returns the difference between the timestamps of the history reference acquisition and the history selected acquisition.
Usage
  • Using the .query() method will send the HORizontal:HISTory:TIMEStamp:DELTa? query.
  • Using the .verify(value) method will send the HORizontal:HISTory:TIMEStamp:DELTa? query and raise an AssertionError if the returned value does not match value.
SCPI Syntax 
- HORizontal:HISTory:TIMEStamp:DELTa?

HorizontalHistoryTimestampReference

Bases: SCPICmdRead

The HORizontal:HISTory:TIMEStamp:REFerence command.

Description
  • This query-only command returns the timestamp of the history reference acquisition.
Usage
  • Using the .query() method will send the HORizontal:HISTory:TIMEStamp:REFerence? query.
  • Using the .verify(value) method will send the HORizontal:HISTory:TIMEStamp:REFerence? query and raise an AssertionError if the returned value does not match value.
SCPI Syntax 
- HORizontal:HISTory:TIMEStamp:REFerence?

HorizontalHistoryTimestampSelected

Bases: SCPICmdRead

The HORizontal:HISTory:TIMEStamp:SELECTED command.

Description
  • This query-only command returns the timestamp of the history selected acquisition.
Usage
  • Using the .query() method will send the HORizontal:HISTory:TIMEStamp:SELECTED? query.
  • Using the .verify(value) method will send the HORizontal:HISTory:TIMEStamp:SELECTED? query and raise an AssertionError if the returned value does not match value.
SCPI Syntax 
- HORizontal:HISTory:TIMEStamp:SELECTED?

HorizontalMain

Bases: SCPICmdRead

The HORizontal:MAIn command tree.

Usage
  • Using the .query() method will send the HORizontal:MAIn? query.
  • Using the .verify(value) method will send the HORizontal:MAIn? query and raise an AssertionError if the returned value does not match value.
Properties
  • .interpratio: The HORizontal:MAIn:INTERPRatio command.

interpratio property 

interpratio: HorizontalMainInterpratio

Return the HORizontal:MAIn:INTERPRatio command.

Description
  • This query-only command returns the Horizontal interpolation ratio.
Usage
  • Using the .query() method will send the HORizontal:MAIn:INTERPRatio? query.
  • Using the .verify(value) method will send the HORizontal:MAIn:INTERPRatio? query and raise an AssertionError if the returned value does not match value.
SCPI Syntax 
- HORizontal:MAIn:INTERPRatio?

HorizontalMainInterpratio

Bases: SCPICmdRead

The HORizontal:MAIn:INTERPRatio command.

Description
  • This query-only command returns the Horizontal interpolation ratio.
Usage
  • Using the .query() method will send the HORizontal:MAIn:INTERPRatio? query.
  • Using the .verify(value) method will send the HORizontal:MAIn:INTERPRatio? query and raise an AssertionError if the returned value does not match value.
SCPI Syntax 
- HORizontal:MAIn:INTERPRatio?

HorizontalMode

Bases: SCPICmdWrite, SCPICmdRead

The HORizontal:MODe command.

Description
  • This command set or queries the horizontal operating mode.
Usage
  • Using the .query() method will send the HORizontal:MODe? query.
  • Using the .verify(value) method will send the HORizontal:MODe? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the HORizontal:MODe value command.
SCPI Syntax 
- HORizontal:MODe {AUTO|MANual}
- HORizontal:MODe?
Info
  • AUTO selects the automatic horizontal model. Auto mode automatically adjusts the sample rate and record length to provide a high acquisition rate in Fast Acq or signal fidelity in analysis. Record length is read only.
  • MANual selects the manual horizontal model. Manual mode lets you change the sample rate, horizontal scale, and record length. These values interact. For example, when you change record length then the horizontal scale also changes.
Properties
  • .automatic: The HORizontal:MODe:AUTOmatic command tree.
  • .manual: The HORizontal:MODe:MANual command tree.
  • .recordlength: The HORizontal:MODe:RECOrdlength command.
  • .samplerate: The HORizontal:MODe:SAMPLERate command.
  • .scale: The HORizontal:MODe:SCAle command.

automatic property 

automatic: HorizontalModeAutomatic

Return the HORizontal:MODe:AUTOmatic command tree.

Usage
  • Using the .query() method will send the HORizontal:MODe:AUTOmatic? query.
  • Using the .verify(value) method will send the HORizontal:MODe:AUTOmatic? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .fastacq: The HORizontal:MODe:AUTOmatic:FASTAcq command tree.

manual property 

manual: HorizontalModeManual

Return the HORizontal:MODe:MANual command tree.

Usage
  • Using the .query() method will send the HORizontal:MODe:MANual? query.
  • Using the .verify(value) method will send the HORizontal:MODe:MANual? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .configure: The HORizontal:MODe:MANual:CONFIGure command.

recordlength property 

recordlength: HorizontalModeRecordlength

Return the HORizontal:MODe:RECOrdlength command.

Description
  • This command sets or queries the record length.
Usage
  • Using the .query() method will send the HORizontal:MODe:RECOrdlength? query.
  • Using the .verify(value) method will send the HORizontal:MODe:RECOrdlength? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the HORizontal:MODe:RECOrdlength value command.
SCPI Syntax 
- HORizontal:MODe:RECOrdlength <NR1>
- HORizontal:MODe:RECOrdlength?
Info
  • <NR1> is the record length in samples. Manual mode lets you change the record length, while the record length is read only for Automatic mode.

samplerate property 

samplerate: HorizontalModeSamplerate

Return the HORizontal:MODe:SAMPLERate command.

Description
  • This command sets or queries the sample rate.
Usage
  • Using the .query() method will send the HORizontal:MODe:SAMPLERate? query.
  • Using the .verify(value) method will send the HORizontal:MODe:SAMPLERate? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the HORizontal:MODe:SAMPLERate value command.
SCPI Syntax 
- HORizontal:MODe:SAMPLERate <NR1>
- HORizontal:MODe:SAMPLERate?
Info
  • <NR1> is the sample rate in samples per second.

scale property 

scale: HorizontalModeScale

Return the HORizontal:MODe:SCAle command.

Description
  • This command sets or queries the horizontal scale.
Usage
  • Using the .query() method will send the HORizontal:MODe:SCAle? query.
  • Using the .verify(value) method will send the HORizontal:MODe:SCAle? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the HORizontal:MODe:SCAle value command.
SCPI Syntax 
- HORizontal:MODe:SCAle <NR1>
- HORizontal:MODe:SCAle?
Info
  • <NR1> is the horizontal scale in seconds per division.

HorizontalModeAutomatic

Bases: SCPICmdRead

The HORizontal:MODe:AUTOmatic command tree.

Usage
  • Using the .query() method will send the HORizontal:MODe:AUTOmatic? query.
  • Using the .verify(value) method will send the HORizontal:MODe:AUTOmatic? query and raise an AssertionError if the returned value does not match value.
Properties
  • .fastacq: The HORizontal:MODe:AUTOmatic:FASTAcq command tree.

fastacq property 

fastacq: HorizontalModeAutomaticFastacq

Return the HORizontal:MODe:AUTOmatic:FASTAcq command tree.

Usage
  • Using the .query() method will send the HORizontal:MODe:AUTOmatic:FASTAcq? query.
  • Using the .verify(value) method will send the HORizontal:MODe:AUTOmatic:FASTAcq? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .recordlength: The HORizontal:MODe:AUTOmatic:FASTAcq:RECOrdlength command tree.

HorizontalModeAutomaticFastacq

Bases: SCPICmdRead

The HORizontal:MODe:AUTOmatic:FASTAcq command tree.

Usage
  • Using the .query() method will send the HORizontal:MODe:AUTOmatic:FASTAcq? query.
  • Using the .verify(value) method will send the HORizontal:MODe:AUTOmatic:FASTAcq? query and raise an AssertionError if the returned value does not match value.
Properties
  • .recordlength: The HORizontal:MODe:AUTOmatic:FASTAcq:RECOrdlength command tree.

recordlength property 

recordlength: HorizontalModeAutomaticFastacqRecordlength

Return the HORizontal:MODe:AUTOmatic:FASTAcq:RECOrdlength command tree.

Usage
  • Using the .query() method will send the HORizontal:MODe:AUTOmatic:FASTAcq:RECOrdlength? query.
  • Using the .verify(value) method will send the HORizontal:MODe:AUTOmatic:FASTAcq:RECOrdlength? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .maximum: The HORizontal:MODe:AUTOmatic:FASTAcq:RECOrdlength:MAXimum command tree.

HorizontalModeAutomaticFastacqRecordlength

Bases: SCPICmdRead

The HORizontal:MODe:AUTOmatic:FASTAcq:RECOrdlength command tree.

Usage
  • Using the .query() method will send the HORizontal:MODe:AUTOmatic:FASTAcq:RECOrdlength? query.
  • Using the .verify(value) method will send the HORizontal:MODe:AUTOmatic:FASTAcq:RECOrdlength? query and raise an AssertionError if the returned value does not match value.
Properties
  • .maximum: The HORizontal:MODe:AUTOmatic:FASTAcq:RECOrdlength:MAXimum command tree.

maximum property 

maximum: HorizontalModeAutomaticFastacqRecordlengthMaximum

Return the HORizontal:MODe:AUTOmatic:FASTAcq:RECOrdlength:MAXimum command tree.

Usage
  • Using the .query() method will send the HORizontal:MODe:AUTOmatic:FASTAcq:RECOrdlength:MAXimum? query.
  • Using the .verify(value) method will send the HORizontal:MODe:AUTOmatic:FASTAcq:RECOrdlength:MAXimum? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .value: The HORizontal:MODe:AUTOmatic:FASTAcq:RECOrdlength:MAXimum:VALue command.
  • .zoomoverride: The HORizontal:MODe:AUTOmatic:FASTAcq:RECOrdlength:MAXimum:ZOOMOVERride command.

HorizontalModeAutomaticFastacqRecordlengthMaximum

Bases: SCPICmdRead

The HORizontal:MODe:AUTOmatic:FASTAcq:RECOrdlength:MAXimum command tree.

Usage
  • Using the .query() method will send the HORizontal:MODe:AUTOmatic:FASTAcq:RECOrdlength:MAXimum? query.
  • Using the .verify(value) method will send the HORizontal:MODe:AUTOmatic:FASTAcq:RECOrdlength:MAXimum? query and raise an AssertionError if the returned value does not match value.
Properties
  • .value: The HORizontal:MODe:AUTOmatic:FASTAcq:RECOrdlength:MAXimum:VALue command.
  • .zoomoverride: The HORizontal:MODe:AUTOmatic:FASTAcq:RECOrdlength:MAXimum:ZOOMOVERride command.

value property 

value: HorizontalModeAutomaticFastacqRecordlengthMaximumValue

Return the HORizontal:MODe:AUTOmatic:FASTAcq:RECOrdlength:MAXimum:VALue command.

Description
  • Sets or queries the horizontal FastAcq maximum record length.
Usage
  • Using the .query() method will send the HORizontal:MODe:AUTOmatic:FASTAcq:RECOrdlength:MAXimum:VALue? query.
  • Using the .verify(value) method will send the HORizontal:MODe:AUTOmatic:FASTAcq:RECOrdlength:MAXimum:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the HORizontal:MODe:AUTOmatic:FASTAcq:RECOrdlength:MAXimum:VALue value command.
SCPI Syntax 
- HORizontal:MODe:AUTOmatic:FASTAcq:RECOrdlength:MAXimum:VALue <NR1>
- HORizontal:MODe:AUTOmatic:FASTAcq:RECOrdlength:MAXimum:VALue?
Info
  • <NR1> is the horizontal FastAcq maximum record length.

zoomoverride property 

zoomoverride: HorizontalModeAutomaticFastacqRecordlengthMaximumZoomoverride

HORizontal:MODe:AUTOmatic:FASTAcq:RECOrdlength:MAXimum:ZOOMOVERride command.

Description
  • Sets or queries the flag which allows override of the horizontal FastAcq maximum record length.
Usage
  • Using the .query() method will send the HORizontal:MODe:AUTOmatic:FASTAcq:RECOrdlength:MAXimum:ZOOMOVERride? query.
  • Using the .verify(value) method will send the HORizontal:MODe:AUTOmatic:FASTAcq:RECOrdlength:MAXimum:ZOOMOVERride? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the HORizontal:MODe:AUTOmatic:FASTAcq:RECOrdlength:MAXimum:ZOOMOVERride value command.
SCPI Syntax 
- HORizontal:MODe:AUTOmatic:FASTAcq:RECOrdlength:MAXimum:ZOOMOVERride {ON|OFF|1|0}
- HORizontal:MODe:AUTOmatic:FASTAcq:RECOrdlength:MAXimum:ZOOMOVERride?
Info
  • OFF does not allow override of the horizontal FastAcq maximum record length.
  • ON allows override of the horizontal FastAcq maximum record length.
  • 0 does not allow override of the horizontal FastAcq maximum record length.
  • 1 allows override of the horizontal FastAcq maximum record length.

HorizontalModeAutomaticFastacqRecordlengthMaximumValue

Bases: SCPICmdWrite, SCPICmdRead

The HORizontal:MODe:AUTOmatic:FASTAcq:RECOrdlength:MAXimum:VALue command.

Description
  • Sets or queries the horizontal FastAcq maximum record length.
Usage
  • Using the .query() method will send the HORizontal:MODe:AUTOmatic:FASTAcq:RECOrdlength:MAXimum:VALue? query.
  • Using the .verify(value) method will send the HORizontal:MODe:AUTOmatic:FASTAcq:RECOrdlength:MAXimum:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the HORizontal:MODe:AUTOmatic:FASTAcq:RECOrdlength:MAXimum:VALue value command.
SCPI Syntax 
- HORizontal:MODe:AUTOmatic:FASTAcq:RECOrdlength:MAXimum:VALue <NR1>
- HORizontal:MODe:AUTOmatic:FASTAcq:RECOrdlength:MAXimum:VALue?
Info
  • <NR1> is the horizontal FastAcq maximum record length.

HorizontalModeAutomaticFastacqRecordlengthMaximumZoomoverride

Bases: SCPICmdWrite, SCPICmdRead

The HORizontal:MODe:AUTOmatic:FASTAcq:RECOrdlength:MAXimum:ZOOMOVERride command.

Description
  • Sets or queries the flag which allows override of the horizontal FastAcq maximum record length.
Usage
  • Using the .query() method will send the HORizontal:MODe:AUTOmatic:FASTAcq:RECOrdlength:MAXimum:ZOOMOVERride? query.
  • Using the .verify(value) method will send the HORizontal:MODe:AUTOmatic:FASTAcq:RECOrdlength:MAXimum:ZOOMOVERride? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the HORizontal:MODe:AUTOmatic:FASTAcq:RECOrdlength:MAXimum:ZOOMOVERride value command.
SCPI Syntax 
- HORizontal:MODe:AUTOmatic:FASTAcq:RECOrdlength:MAXimum:ZOOMOVERride {ON|OFF|1|0}
- HORizontal:MODe:AUTOmatic:FASTAcq:RECOrdlength:MAXimum:ZOOMOVERride?
Info
  • OFF does not allow override of the horizontal FastAcq maximum record length.
  • ON allows override of the horizontal FastAcq maximum record length.
  • 0 does not allow override of the horizontal FastAcq maximum record length.
  • 1 allows override of the horizontal FastAcq maximum record length.

HorizontalModeManual

Bases: SCPICmdRead

The HORizontal:MODe:MANual command tree.

Usage
  • Using the .query() method will send the HORizontal:MODe:MANual? query.
  • Using the .verify(value) method will send the HORizontal:MODe:MANual? query and raise an AssertionError if the returned value does not match value.
Properties
  • .configure: The HORizontal:MODe:MANual:CONFIGure command.

configure property 

configure: HorizontalModeManualConfigure

Return the HORizontal:MODe:MANual:CONFIGure command.

Description
  • Sets or queries which horizontal control (scale or record length) will primarily change when the sample rate is changed in Manual mode. If the selected control (scale or record length) reaches a limit then the unselected control (record length or scale) may also change.
Usage
  • Using the .query() method will send the HORizontal:MODe:MANual:CONFIGure? query.
  • Using the .verify(value) method will send the HORizontal:MODe:MANual:CONFIGure? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the HORizontal:MODe:MANual:CONFIGure value command.
SCPI Syntax 
- HORizontal:MODe:MANual:CONFIGure {HORIZontalscale|RECORDLength}
- HORizontal:MODe:MANual:CONFIGure?
Info
  • HORIZontalscale will change when sample rate is adjusted.
  • RECORDLength will change when sample rate is adjusted.

HorizontalModeManualConfigure

Bases: SCPICmdWrite, SCPICmdRead

The HORizontal:MODe:MANual:CONFIGure command.

Description
  • Sets or queries which horizontal control (scale or record length) will primarily change when the sample rate is changed in Manual mode. If the selected control (scale or record length) reaches a limit then the unselected control (record length or scale) may also change.
Usage
  • Using the .query() method will send the HORizontal:MODe:MANual:CONFIGure? query.
  • Using the .verify(value) method will send the HORizontal:MODe:MANual:CONFIGure? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the HORizontal:MODe:MANual:CONFIGure value command.
SCPI Syntax 
- HORizontal:MODe:MANual:CONFIGure {HORIZontalscale|RECORDLength}
- HORizontal:MODe:MANual:CONFIGure?
Info
  • HORIZontalscale will change when sample rate is adjusted.
  • RECORDLength will change when sample rate is adjusted.

HorizontalModeRecordlength

Bases: SCPICmdWrite, SCPICmdRead

The HORizontal:MODe:RECOrdlength command.

Description
  • This command sets or queries the record length.
Usage
  • Using the .query() method will send the HORizontal:MODe:RECOrdlength? query.
  • Using the .verify(value) method will send the HORizontal:MODe:RECOrdlength? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the HORizontal:MODe:RECOrdlength value command.
SCPI Syntax 
- HORizontal:MODe:RECOrdlength <NR1>
- HORizontal:MODe:RECOrdlength?
Info
  • <NR1> is the record length in samples. Manual mode lets you change the record length, while the record length is read only for Automatic mode.

HorizontalModeSamplerate

Bases: SCPICmdWrite, SCPICmdRead

The HORizontal:MODe:SAMPLERate command.

Description
  • This command sets or queries the sample rate.
Usage
  • Using the .query() method will send the HORizontal:MODe:SAMPLERate? query.
  • Using the .verify(value) method will send the HORizontal:MODe:SAMPLERate? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the HORizontal:MODe:SAMPLERate value command.
SCPI Syntax 
- HORizontal:MODe:SAMPLERate <NR1>
- HORizontal:MODe:SAMPLERate?
Info
  • <NR1> is the sample rate in samples per second.

HorizontalModeScale

Bases: SCPICmdWrite, SCPICmdRead

The HORizontal:MODe:SCAle command.

Description
  • This command sets or queries the horizontal scale.
Usage
  • Using the .query() method will send the HORizontal:MODe:SCAle? query.
  • Using the .verify(value) method will send the HORizontal:MODe:SCAle? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the HORizontal:MODe:SCAle value command.
SCPI Syntax 
- HORizontal:MODe:SCAle <NR1>
- HORizontal:MODe:SCAle?
Info
  • <NR1> is the horizontal scale in seconds per division.

HorizontalPosition

Bases: SCPICmdWrite, SCPICmdRead

The HORizontal:POSition command.

Description
  • This command sets or queries the horizontal position as a percent of screen width. When Horizontal Delay Mode is turned off, this command is equivalent to adjusting the HORIZONTAL POSITION knob on the front panel. When Horizontal Delay Mode is turned on, the horizontal position is forced to 50%.
Usage
  • Using the .query() method will send the HORizontal:POSition? query.
  • Using the .verify(value) method will send the HORizontal:POSition? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the HORizontal:POSition value command.
SCPI Syntax 
- HORizontal:POSition <NR3>
- HORizontal:POSition?
Info
  • <NR3> is from 0 to ≈100 and is the position of the trigger point on the screen (0 = left edge, 100 = right edge).

HorizontalPreviewstate

Bases: SCPICmdRead

The HORizontal:PREViewstate command.

Description
  • This query returns the display system preview state.
Usage
  • Using the .query() method will send the HORizontal:PREViewstate? query.
  • Using the .verify(value) method will send the HORizontal:PREViewstate? query and raise an AssertionError if the returned value does not match value.
SCPI Syntax 
- HORizontal:PREViewstate?

HorizontalRecordlength

Bases: SCPICmdWrite, SCPICmdRead

The HORizontal:RECOrdlength command.

Description
  • This command sets or queries the horizontal record length. To change the record length the Horizontal Mode must be set to Manual.
Usage
  • Using the .query() method will send the HORizontal:RECOrdlength? query.
  • Using the .verify(value) method will send the HORizontal:RECOrdlength? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the HORizontal:RECOrdlength value command.
SCPI Syntax 
- HORizontal:RECOrdlength <NR1>
- HORizontal:RECOrdlength?
Info
  • <NR1> is the horizontal record length.

HorizontalRoll

Bases: SCPICmdRead

The HORizontal:ROLL command.

Description
  • Queries the horizontal roll mode status.
Usage
  • Using the .query() method will send the HORizontal:ROLL? query.
  • Using the .verify(value) method will send the HORizontal:ROLL? query and raise an AssertionError if the returned value does not match value.
SCPI Syntax 
- HORizontal:ROLL?

HorizontalSamplerate

Bases: SCPICmdWrite, SCPICmdRead

The HORizontal:SAMPLERate command.

Description
  • This command sets or queries the horizontal sample rate.
Usage
  • Using the .query() method will send the HORizontal:SAMPLERate? query.
  • Using the .verify(value) method will send the HORizontal:SAMPLERate? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the HORizontal:SAMPLERate value command.
SCPI Syntax 
- HORizontal:SAMPLERate <NR3>
- HORizontal:SAMPLERate?
Info
  • <NR3> is the horizontal sample rate in samples per second.
Properties
  • .analyzemode: The HORizontal:SAMPLERate:ANALYZemode command tree.

analyzemode property 

analyzemode: HorizontalSamplerateAnalyzemode

Return the HORizontal:SAMPLERate:ANALYZemode command tree.

Usage
  • Using the .query() method will send the HORizontal:SAMPLERate:ANALYZemode? query.
  • Using the .verify(value) method will send the HORizontal:SAMPLERate:ANALYZemode? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .minimum: The HORizontal:SAMPLERate:ANALYZemode:MINimum command tree.

HorizontalSamplerateAnalyzemode

Bases: SCPICmdRead

The HORizontal:SAMPLERate:ANALYZemode command tree.

Usage
  • Using the .query() method will send the HORizontal:SAMPLERate:ANALYZemode? query.
  • Using the .verify(value) method will send the HORizontal:SAMPLERate:ANALYZemode? query and raise an AssertionError if the returned value does not match value.
Properties
  • .minimum: The HORizontal:SAMPLERate:ANALYZemode:MINimum command tree.

minimum property 

minimum: HorizontalSamplerateAnalyzemodeMinimum

Return the HORizontal:SAMPLERate:ANALYZemode:MINimum command tree.

Usage
  • Using the .query() method will send the HORizontal:SAMPLERate:ANALYZemode:MINimum? query.
  • Using the .verify(value) method will send the HORizontal:SAMPLERate:ANALYZemode:MINimum? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .override: The HORizontal:SAMPLERate:ANALYZemode:MINimum:OVERRide command.
  • .value: The HORizontal:SAMPLERate:ANALYZemode:MINimum:VALue command.

HorizontalSamplerateAnalyzemodeMinimum

Bases: SCPICmdRead

The HORizontal:SAMPLERate:ANALYZemode:MINimum command tree.

Usage
  • Using the .query() method will send the HORizontal:SAMPLERate:ANALYZemode:MINimum? query.
  • Using the .verify(value) method will send the HORizontal:SAMPLERate:ANALYZemode:MINimum? query and raise an AssertionError if the returned value does not match value.
Properties
  • .override: The HORizontal:SAMPLERate:ANALYZemode:MINimum:OVERRide command.
  • .value: The HORizontal:SAMPLERate:ANALYZemode:MINimum:VALue command.

override property 

override: HorizontalSamplerateAnalyzemodeMinimumOverride

Return the HORizontal:SAMPLERate:ANALYZemode:MINimum:OVERRide command.

Description
  • Sets or queries the flag which allows override of the horizontal analyze minimum sample rate.
Usage
  • Using the .query() method will send the HORizontal:SAMPLERate:ANALYZemode:MINimum:OVERRide? query.
  • Using the .verify(value) method will send the HORizontal:SAMPLERate:ANALYZemode:MINimum:OVERRide? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the HORizontal:SAMPLERate:ANALYZemode:MINimum:OVERRide value command.
SCPI Syntax 
- HORizontal:SAMPLERate:ANALYZemode:MINimum:OVERRide {ON|OFF|1|0}
- HORizontal:SAMPLERate:ANALYZemode:MINimum:OVERRide?
Info
  • 0 does not allow override of the horizontal analyze minimum sample rate.
  • 1 allows override of the horizontal analyze minimum sample rate.
  • OFF does not allow override of the horizontal analyze minimum sample rate.
  • ON allows override of the horizontal analyze minimum sample rate.

value property 

value: HorizontalSamplerateAnalyzemodeMinimumValue

Return the HORizontal:SAMPLERate:ANALYZemode:MINimum:VALue command.

Description
  • Sets or queries the minimum sample rate used by Analysis Automatic horizontal mode.
Usage
  • Using the .query() method will send the HORizontal:SAMPLERate:ANALYZemode:MINimum:VALue? query.
  • Using the .verify(value) method will send the HORizontal:SAMPLERate:ANALYZemode:MINimum:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the HORizontal:SAMPLERate:ANALYZemode:MINimum:VALue value command.
SCPI Syntax 
- HORizontal:SAMPLERate:ANALYZemode:MINimum:VALue {AUTOmatic|<NR3>}
- HORizontal:SAMPLERate:ANALYZemode:MINimum:VALue?
Info
  • AUTOmatic allows the instrument to set the minimum value.
  • <NR3> is the minimum sample rate.

HorizontalSamplerateAnalyzemodeMinimumOverride

Bases: SCPICmdWrite, SCPICmdRead

The HORizontal:SAMPLERate:ANALYZemode:MINimum:OVERRide command.

Description
  • Sets or queries the flag which allows override of the horizontal analyze minimum sample rate.
Usage
  • Using the .query() method will send the HORizontal:SAMPLERate:ANALYZemode:MINimum:OVERRide? query.
  • Using the .verify(value) method will send the HORizontal:SAMPLERate:ANALYZemode:MINimum:OVERRide? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the HORizontal:SAMPLERate:ANALYZemode:MINimum:OVERRide value command.
SCPI Syntax 
- HORizontal:SAMPLERate:ANALYZemode:MINimum:OVERRide {ON|OFF|1|0}
- HORizontal:SAMPLERate:ANALYZemode:MINimum:OVERRide?
Info
  • 0 does not allow override of the horizontal analyze minimum sample rate.
  • 1 allows override of the horizontal analyze minimum sample rate.
  • OFF does not allow override of the horizontal analyze minimum sample rate.
  • ON allows override of the horizontal analyze minimum sample rate.

HorizontalSamplerateAnalyzemodeMinimumValue

Bases: SCPICmdWrite, SCPICmdRead

The HORizontal:SAMPLERate:ANALYZemode:MINimum:VALue command.

Description
  • Sets or queries the minimum sample rate used by Analysis Automatic horizontal mode.
Usage
  • Using the .query() method will send the HORizontal:SAMPLERate:ANALYZemode:MINimum:VALue? query.
  • Using the .verify(value) method will send the HORizontal:SAMPLERate:ANALYZemode:MINimum:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the HORizontal:SAMPLERate:ANALYZemode:MINimum:VALue value command.
SCPI Syntax 
- HORizontal:SAMPLERate:ANALYZemode:MINimum:VALue {AUTOmatic|<NR3>}
- HORizontal:SAMPLERate:ANALYZemode:MINimum:VALue?
Info
  • AUTOmatic allows the instrument to set the minimum value.
  • <NR3> is the minimum sample rate.

HorizontalScale

Bases: SCPICmdWrite, SCPICmdRead

The HORizontal:SCAle command.

Description
  • This command sets or queries the horizontal scale.
Usage
  • Using the .query() method will send the HORizontal:SCAle? query.
  • Using the .verify(value) method will send the HORizontal:SCAle? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the HORizontal:SCAle value command.
SCPI Syntax 
- HORizontal:SCAle <NR3>
- HORizontal:SCAle?
Info
  • <NR3> is the horizontal scale in time per division.