horizontal ¶

The horizontal commands module.

These commands are used in the following models: DPO5K, DPO5KB, DPO70KC, DPO70KD, DPO70KDX, DPO70KSX, DPO7K, DPO7KC, DSA70KC, DSA70KD, MSO5K, MSO5KB, MSO70KC, MSO70KDX

THIS FILE IS AUTO-GENERATED, IT SHOULD NOT BE MANUALLY MODIFIED.

Please report an issue if one is found.

Commands and Queries

- HORizontal:ACQDURATION?
- HORizontal:ACQLENGTH?
- HORizontal:DIGital:MAGnivu:POSition?
- HORizontal:DIGital:RECOrdlength:MAGnivu?
- HORizontal:DIGital:RECOrdlength:MAIn?
- HORizontal:DIGital:RECOrdlength?
- HORizontal:DIGital:SAMPLERate:MAGnivu?
- HORizontal:DIGital:SAMPLERate:MAIn?
- HORizontal:DIGital:SAMPLERate?
- HORizontal:DIVisions?
- HORizontal:FASTframe:COUNt <NR1>
- HORizontal:FASTframe:COUNt?
- HORizontal:FASTframe:FRAMELock {ON|OFF|<NR1>}
- HORizontal:FASTframe:FRAMELock?
- HORizontal:FASTframe:LENgth <NR1>
- HORizontal:FASTframe:LENgth?
- HORizontal:FASTframe:MAXFRames?
- HORizontal:FASTframe:MULtipleframes:FRAMESTart:CH<x> <NR1>
- HORizontal:FASTframe:MULtipleframes:FRAMESTart:CH<x>?
- HORizontal:FASTframe:MULtipleframes:FRAMESTart:D<x> <NR1>
- HORizontal:FASTframe:MULtipleframes:FRAMESTart:D<x>?
- HORizontal:FASTframe:MULtipleframes:FRAMESTart:MATH<x> <NR1>
- HORizontal:FASTframe:MULtipleframes:FRAMESTart:MATH<x>?
- HORizontal:FASTframe:MULtipleframes:FRAMESTart:REF<x> <NR1>
- HORizontal:FASTframe:MULtipleframes:FRAMESTart:REF<x>?
- HORizontal:FASTframe:MULtipleframes:MODe {OFF|OVERlay|ONLYOVERlay}
- HORizontal:FASTframe:MULtipleframes:MODe?
- HORizontal:FASTframe:MULtipleframes:NUMFRames:CH<x> <NR1>
- HORizontal:FASTframe:MULtipleframes:NUMFRames:CH<x>?
- HORizontal:FASTframe:MULtipleframes:NUMFRames:D<x> <NR1>
- HORizontal:FASTframe:MULtipleframes:NUMFRames:D<x>?
- HORizontal:FASTframe:MULtipleframes:NUMFRames:MATH<x> <NR1>
- HORizontal:FASTframe:MULtipleframes:NUMFRames:MATH<x>?
- HORizontal:FASTframe:MULtipleframes:NUMFRames:REF<x> <NR1>
- HORizontal:FASTframe:MULtipleframes:NUMFRames:REF<x>?
- HORizontal:FASTframe:REF:FRAme <NR1>
- HORizontal:FASTframe:REF:FRAme?
- HORizontal:FASTframe:REF:SOUrce <wfm>
- HORizontal:FASTframe:REF:SOUrce?
- HORizontal:FASTframe:SELECTED:CH<x> <NRF>
- HORizontal:FASTframe:SELECTED:CH<x>?
- HORizontal:FASTframe:SELECTED:MATH<x> <NRF>
- HORizontal:FASTframe:SELECTED:MATH<x>?
- HORizontal:FASTframe:SELECTED:REF<x> <NRF>
- HORizontal:FASTframe:SELECTED:REF<x>?
- HORizontal:FASTframe:SELECTED:SOUrce <NR1>
- HORizontal:FASTframe:SELECTED:SOUrce?
- HORizontal:FASTframe:SEQuence {FIRst|LAST}
- HORizontal:FASTframe:SEQuence?
- HORizontal:FASTframe:SINGLEFramemath {ON|OFF|<NR1>}
- HORizontal:FASTframe:SINGLEFramemath?
- HORizontal:FASTframe:SIXteenbit {ON|OFF|<NR1>}
- HORizontal:FASTframe:SIXteenbit?
- HORizontal:FASTframe:STATE {ON|OFF|<NR1>}
- HORizontal:FASTframe:STATE?
- HORizontal:FASTframe:SUMFrame {NONe|AVErage|ENVelope}
- HORizontal:FASTframe:SUMFrame?
- HORizontal:FASTframe:TIMEStamp:ALL:CH<x>? <NR1>, <NR1>
- HORizontal:FASTframe:TIMEStamp:ALL:D<x>? <NR1>, <NR1>
- HORizontal:FASTframe:TIMEStamp:ALL:MATH<x>? <NR1>, <NR1>
- HORizontal:FASTframe:TIMEStamp:ALL:REF<x>? <NR1>, <NR1>
- HORizontal:FASTframe:TIMEStamp:BETWeen:CH<x>? <NR1>, <NR1>
- HORizontal:FASTframe:TIMEStamp:BETWeen:D<x>? <NR1>, <NR1>
- HORizontal:FASTframe:TIMEStamp:BETWeen:MATH<x>? <NR1>, <NR1>
- HORizontal:FASTframe:TIMEStamp:BETWeen:REF<x>? <NR1>, <NR1>
- HORizontal:FASTframe:TIMEStamp:DELTa:CH<x>?
- HORizontal:FASTframe:TIMEStamp:DELTa:D<x>?
- HORizontal:FASTframe:TIMEStamp:DELTa:MATH<x>?
- HORizontal:FASTframe:TIMEStamp:DELTa:REF<x>?
- HORizontal:FASTframe:TIMEStamp:FRAMe:CH<x>? <NR1>
- HORizontal:FASTframe:TIMEStamp:FRAMe:D<x>? <NR1>
- HORizontal:FASTframe:TIMEStamp:FRAMe:MATH<x>? <NR1>
- HORizontal:FASTframe:TIMEStamp:FRAMe:REF<x>? <NR1>
- HORizontal:FASTframe:TIMEStamp:REF?
- HORizontal:FASTframe:TIMEStamp:SELECTED:CH<x>?
- HORizontal:FASTframe:TIMEStamp:SELECTED:D<x>?
- HORizontal:FASTframe:TIMEStamp:SELECTED:MATH<x>?
- HORizontal:FASTframe:TIMEStamp:SELECTED:REF<x>?
- HORizontal:FASTframe:TRACk {LIVE|ALL}
- HORizontal:FASTframe:TRACk?
- HORizontal:FASTframe:XZEro:ALL:CH<x>? <NR1>,<NR1>
- HORizontal:FASTframe:XZEro:ALL:REF<x>? <NR1>,<NR1>
- HORizontal:FASTframe:XZEro:FRAme:CH<x>? <NR1>
- HORizontal:FASTframe:XZEro:FRAme:REF<x>? <NR1>
- HORizontal:FASTframe:XZEro:REF?
- HORizontal:FASTframe:XZEro:SELECTED:CH<x>?
- HORizontal:FASTframe:XZEro:SELECTED:REF<x>?
- HORizontal:FASTframe?
- HORizontal:MAIn:DELay:MODe {ON|OFF|<NR1>}
- HORizontal:MAIn:DELay:MODe?
- HORizontal:MAIn:DELay:POSition <NR3>
- HORizontal:MAIn:DELay:POSition?
- HORizontal:MAIn:DELay:TIMe <NR3>
- HORizontal:MAIn:DELay:TIMe?
- HORizontal:MAIn:INTERPRatio?
- HORizontal:MAIn:SCAle
- HORizontal:MAIn:SCAle?
- HORizontal:MAIn:UNIts <QString>
- HORizontal:MAIn:UNIts:STRing <QString>
- HORizontal:MAIn:UNIts:STRing?
- HORizontal:MAIn:UNIts?
- HORizontal:MAIn?
- HORizontal:MODE {AUTO|CONStant|MANual}
- HORizontal:MODE:AUTO:LIMITrecordlen <NR1>
- HORizontal:MODE:AUTO:LIMITrecordlen?
- HORizontal:MODE:RECOrdlength <NR1>
- HORizontal:MODE:RECOrdlength?
- HORizontal:MODE:SAMPLERate <NR1>
- HORizontal:MODE:SAMPLERate?
- HORizontal:MODE:SCAle <NR1>
- HORizontal:MODE:SCAle?
- HORizontal:MODE?
- HORizontal:POSition <NR3>
- HORizontal:POSition?
- HORizontal:ROLL {AUTO|OFF|ON}
- HORizontal:ROLL?
- HORizontal:TIMEStamp:CH<x>?
- HORizontal:TIMEStamp:REF<x>?
- HORizontal?

Horizontal ¶

Bases: SCPICmdRead

The HORizontal command.

Description

Queries the current horizontal settings.

Usage

Using the .query() method will send the HORizontal? query.
Using the .verify(value) method will send the HORizontal? query and raise an AssertionError if the returned value does not match value.

SCPI Syntax

- HORizontal?

Properties

.acqduration: The HORizontal:ACQDURATION command.
.acqlength: The HORizontal:ACQLENGTH command.
.digital: The HORizontal:DIGital command tree.
.divisions: The HORizontal:DIVisions command.
.fastframe: The HORizontal:FASTframe command.
.main: The HORizontal:MAIn command.
.mode: The HORizontal:MODE command.
.position: The HORizontal:POSition command.
.roll: The HORizontal:ROLL command.
.timestamp: The HORizontal:TIMEStamp command tree.

acqduration `property` ¶

acqduration: HorizontalAcqduration

Return the HORizontal:ACQDURATION command.

Description

This query returns the timebase duration.

Usage

Using the .query() method will send the HORizontal:ACQDURATION? query.
Using the .verify(value) method will send the HORizontal:ACQDURATION? query and raise an AssertionError if the returned value does not match value.

SCPI Syntax

- HORizontal:ACQDURATION?

acqlength `property` ¶

acqlength: HorizontalAcqlength

Return the HORizontal:ACQLENGTH command.

Description

This query returns the record length.

Usage

Using the .query() method will send the HORizontal:ACQLENGTH? query.
Using the .verify(value) method will send the HORizontal:ACQLENGTH? query and raise an AssertionError if the returned value does not match value.

SCPI Syntax

- HORizontal:ACQLENGTH?

digital `property` ¶

digital: HorizontalDigital

Return the HORizontal:DIGital command tree.

Usage

Using the .query() method will send the HORizontal:DIGital? query.
Using the .verify(value) method will send the HORizontal:DIGital? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.magnivu: The HORizontal:DIGital:MAGnivu command tree.
.recordlength: The HORizontal:DIGital:RECOrdlength command.
.samplerate: The HORizontal:DIGital:SAMPLERate command.

divisions `property` ¶

divisions: HorizontalDivisions

Return the HORizontal:DIVisions command.

Description

This query-only command returns the number of graticule divisions.

Usage

Using the .query() method will send the HORizontal:DIVisions? query.
Using the .verify(value) method will send the HORizontal:DIVisions? query and raise an AssertionError if the returned value does not match value.

SCPI Syntax

- HORizontal:DIVisions?

fastframe `property` ¶

fastframe: HorizontalFastframe

Return the HORizontal:FASTframe command.

Description

This query-only command returns all of the settings for the horizontal FastFrame commands.

Usage

Using the .query() method will send the HORizontal:FASTframe? query.
Using the .verify(value) method will send the HORizontal:FASTframe? query and raise an AssertionError if the returned value does not match value.

SCPI Syntax

- HORizontal:FASTframe?

Sub-properties

.count: The HORizontal:FASTframe:COUNt command.
.framelock: The HORizontal:FASTframe:FRAMELock command.
.length: The HORizontal:FASTframe:LENgth command.
.maxframes: The HORizontal:FASTframe:MAXFRames command.
.multipleframes: The HORizontal:FASTframe:MULtipleframes command tree.
.ref: The HORizontal:FASTframe:REF command tree.
.selected: The HORizontal:FASTframe:SELECTED command tree.
.sequence: The HORizontal:FASTframe:SEQuence command.
.singleframemath: The HORizontal:FASTframe:SINGLEFramemath command.
.sixteenbit: The HORizontal:FASTframe:SIXteenbit command.
.state: The HORizontal:FASTframe:STATE command.
.sumframe: The HORizontal:FASTframe:SUMFrame command.
.timestamp: The HORizontal:FASTframe:TIMEStamp command tree.
.track: The HORizontal:FASTframe:TRACk command.
.xzero: The HORizontal:FASTframe:XZEro command tree.

main `property` ¶

main: HorizontalMain

Return the HORizontal:MAIn command.

Description

This query-only command returns the time per division of the time base. This command is equivalent to selecting Position/Scale from the Horiz/Acq menu.

Usage

Using the .query() method will send the HORizontal:MAIn? query.
Using the .verify(value) method will send the HORizontal:MAIn? query and raise an AssertionError if the returned value does not match value.

SCPI Syntax

- HORizontal:MAIn?

Sub-properties

.interpratio: The HORizontal:MAIn:INTERPRatio command.
.scale: The HORizontal:MAIn:SCAle command.
.units: The HORizontal:MAIn:UNIts command.
.delay: The HORizontal:MAIn:DELay command tree.

mode `property` ¶

mode: HorizontalMode

Return the HORizontal:MODE command.

Description

This command set or queries the horizontal mode. Auto mode is the factory default.

Usage

Using the .query() method will send the HORizontal:MODE? query.
Using the .verify(value) method will send the HORizontal:MODE? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the HORizontal:MODE value command.

SCPI Syntax

- HORizontal:MODE {AUTO|CONStant|MANual}
- HORizontal:MODE?

Info

AUTO selects the automatic horizontal model. Auto mode attempts to keep record length constant as you change the time per division setting. Record length is read only.
CONSTANT selects the constant horizontal model. Constant mode attempts to keep sample rate constant as you change the time per division setting. Record length is read only.
MANUAL selects the manual horizontal model. Manual mode lets you change sample mode and record length. Time per division or Horizontal scale is read only.

Sub-properties

.auto: The HORizontal:MODE:AUTO command tree.
.recordlength: The HORizontal:MODE:RECOrdlength command.
.samplerate: The HORizontal:MODE:SAMPLERate command.
.scale: The HORizontal:MODE:SCAle command.

position `property` ¶

position: HorizontalPosition

Return the HORizontal:POSition command.

Description

This command sets or queries the horizontal position as a percent of screen width. When Horizontal Delay Mode is turned off, this command is equivalent to adjusting the HORIZONTAL POSITION knob on the front panel. When Horizontal Delay Mode is turned on, the horizontal position is forced to 50%.

Usage

Using the .query() method will send the HORizontal:POSition? query.
Using the .verify(value) method will send the HORizontal:POSition? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the HORizontal:POSition value command.

SCPI Syntax

- HORizontal:POSition <NR3>
- HORizontal:POSition?

Info

<NR3> is from 0 to ≈100 and is the position of the trigger point on the screen (0 = left edge, 100 = right edge).

roll `property` ¶

roll: HorizontalRoll

Return the HORizontal:ROLL command.

Description

This command sets or queries the Roll Mode status. Use Roll Mode when you want to view data at very slow sweep speeds. It is useful for observing data samples on the screen as they occur. This command is equivalent to selecting Horizontal/Acquisition Setup from the Horiz/Acq menu, selecting the Acquisition tab, and setting the Roll Mode to Auto or Off.

Usage

Using the .query() method will send the HORizontal:ROLL? query.
Using the .verify(value) method will send the HORizontal:ROLL? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the HORizontal:ROLL value command.

SCPI Syntax

- HORizontal:ROLL {AUTO|OFF|ON}
- HORizontal:ROLL?

Info

AUTO enables Roll Mode, if the time/division is set appropriately.
OFF disables Roll Mode.
ON enables Roll Mode, if the time/division is set appropriately.

timestamp `property` ¶

timestamp: HorizontalTimestamp

Return the HORizontal:TIMEStamp command tree.

Usage

Using the .query() method will send the HORizontal:TIMEStamp? query.
Using the .verify(value) method will send the HORizontal:TIMEStamp? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.ch: The HORizontal:TIMEStamp:CH<x> command.
.ref: The HORizontal:TIMEStamp:REF<x> command.

HorizontalAcqduration ¶

Bases: SCPICmdRead

The HORizontal:ACQDURATION command.

Description

This query returns the timebase duration.

Usage

Using the .query() method will send the HORizontal:ACQDURATION? query.
Using the .verify(value) method will send the HORizontal:ACQDURATION? query and raise an AssertionError if the returned value does not match value.

SCPI Syntax

- HORizontal:ACQDURATION?

HorizontalAcqlength ¶

Bases: SCPICmdRead

The HORizontal:ACQLENGTH command.

Description

This query returns the record length.

Usage

Using the .query() method will send the HORizontal:ACQLENGTH? query.
Using the .verify(value) method will send the HORizontal:ACQLENGTH? query and raise an AssertionError if the returned value does not match value.

SCPI Syntax

- HORizontal:ACQLENGTH?

HorizontalDigital ¶

Bases: SCPICmdRead

The HORizontal:DIGital command tree.

Usage

Using the .query() method will send the HORizontal:DIGital? query.
Using the .verify(value) method will send the HORizontal:DIGital? query and raise an AssertionError if the returned value does not match value.

Properties

.magnivu: The HORizontal:DIGital:MAGnivu command tree.
.recordlength: The HORizontal:DIGital:RECOrdlength command.
.samplerate: The HORizontal:DIGital:SAMPLERate command.

magnivu `property` ¶

magnivu: HorizontalDigitalMagnivu

Return the HORizontal:DIGital:MAGnivu command tree.

Usage

Using the .query() method will send the HORizontal:DIGital:MAGnivu? query.
Using the .verify(value) method will send the HORizontal:DIGital:MAGnivu? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.position: The HORizontal:DIGital:MAGnivu:POSition command.

recordlength `property` ¶

recordlength: HorizontalDigitalRecordlength

Return the HORizontal:DIGital:RECOrdlength command.

Description

This command queries the record length of the digital acquisition.

Usage

Using the .query() method will send the HORizontal:DIGital:RECOrdlength? query.
Using the .verify(value) method will send the HORizontal:DIGital:RECOrdlength? query and raise an AssertionError if the returned value does not match value.

SCPI Syntax

- HORizontal:DIGital:RECOrdlength?

Sub-properties

.magnivu: The HORizontal:DIGital:RECOrdlength:MAGnivu command.
.main: The HORizontal:DIGital:RECOrdlength:MAIn command.

samplerate `property` ¶

samplerate: HorizontalDigitalSamplerate

Return the HORizontal:DIGital:SAMPLERate command.

Description

This command queries the sample rate of the digital acquisition.

Usage

Using the .query() method will send the HORizontal:DIGital:SAMPLERate? query.
Using the .verify(value) method will send the HORizontal:DIGital:SAMPLERate? query and raise an AssertionError if the returned value does not match value.

SCPI Syntax

- HORizontal:DIGital:SAMPLERate?

Sub-properties

.magnivu: The HORizontal:DIGital:SAMPLERate:MAGnivu command.
.main: The HORizontal:DIGital:SAMPLERate:MAIn command.

HorizontalDigitalMagnivu ¶

Bases: SCPICmdRead

The HORizontal:DIGital:MAGnivu command tree.

Usage

Using the .query() method will send the HORizontal:DIGital:MAGnivu? query.
Using the .verify(value) method will send the HORizontal:DIGital:MAGnivu? query and raise an AssertionError if the returned value does not match value.

Properties

.position: The HORizontal:DIGital:MAGnivu:POSition command.

position `property` ¶

position: HorizontalDigitalMagnivuPosition

Return the HORizontal:DIGital:MAGnivu:POSition command.

Description

This command queries the horizontal position of the trigger in percent, within the MagniVu digital acquisition. The MagniVu digital acquisition always includes the trigger. When the trigger position is adjusted near the edges of the display, the horizontal position of the MagniVu acquisition is adjusted to keep as much of the MagniVu acquisition in the display region as possible.

Usage

Using the .query() method will send the HORizontal:DIGital:MAGnivu:POSition? query.
Using the .verify(value) method will send the HORizontal:DIGital:MAGnivu:POSition? query and raise an AssertionError if the returned value does not match value.

SCPI Syntax

- HORizontal:DIGital:MAGnivu:POSition?

HorizontalDigitalMagnivuPosition ¶

Bases: SCPICmdRead

The HORizontal:DIGital:MAGnivu:POSition command.

Description

This command queries the horizontal position of the trigger in percent, within the MagniVu digital acquisition. The MagniVu digital acquisition always includes the trigger. When the trigger position is adjusted near the edges of the display, the horizontal position of the MagniVu acquisition is adjusted to keep as much of the MagniVu acquisition in the display region as possible.

Usage

Using the .query() method will send the HORizontal:DIGital:MAGnivu:POSition? query.
Using the .verify(value) method will send the HORizontal:DIGital:MAGnivu:POSition? query and raise an AssertionError if the returned value does not match value.

SCPI Syntax

- HORizontal:DIGital:MAGnivu:POSition?

HorizontalDigitalRecordlength ¶

Bases: SCPICmdRead

The HORizontal:DIGital:RECOrdlength command.

Description

This command queries the record length of the digital acquisition.

Usage

Using the .query() method will send the HORizontal:DIGital:RECOrdlength? query.
Using the .verify(value) method will send the HORizontal:DIGital:RECOrdlength? query and raise an AssertionError if the returned value does not match value.

SCPI Syntax

- HORizontal:DIGital:RECOrdlength?

Properties

.magnivu: The HORizontal:DIGital:RECOrdlength:MAGnivu command.
.main: The HORizontal:DIGital:RECOrdlength:MAIn command.

magnivu `property` ¶

magnivu: HorizontalDigitalRecordlengthMagnivu

Return the HORizontal:DIGital:RECOrdlength:MAGnivu command.

Description

Returns the record length of the MagniVu digital acquisition.

Usage

Using the .query() method will send the HORizontal:DIGital:RECOrdlength:MAGnivu? query.
Using the .verify(value) method will send the HORizontal:DIGital:RECOrdlength:MAGnivu? query and raise an AssertionError if the returned value does not match value.

SCPI Syntax

- HORizontal:DIGital:RECOrdlength:MAGnivu?

main `property` ¶

main: HorizontalDigitalRecordlengthMain

Return the HORizontal:DIGital:RECOrdlength:MAIn command.

Description

Returns the record length of the main digital acquisition.

Usage

Using the .query() method will send the HORizontal:DIGital:RECOrdlength:MAIn? query.
Using the .verify(value) method will send the HORizontal:DIGital:RECOrdlength:MAIn? query and raise an AssertionError if the returned value does not match value.

SCPI Syntax

- HORizontal:DIGital:RECOrdlength:MAIn?

HorizontalDigitalRecordlengthMagnivu ¶

Bases: SCPICmdRead

The HORizontal:DIGital:RECOrdlength:MAGnivu command.

Description

Returns the record length of the MagniVu digital acquisition.

Usage

Using the .query() method will send the HORizontal:DIGital:RECOrdlength:MAGnivu? query.
Using the .verify(value) method will send the HORizontal:DIGital:RECOrdlength:MAGnivu? query and raise an AssertionError if the returned value does not match value.

SCPI Syntax

- HORizontal:DIGital:RECOrdlength:MAGnivu?

HorizontalDigitalRecordlengthMain ¶

Bases: SCPICmdRead

The HORizontal:DIGital:RECOrdlength:MAIn command.

Description

Returns the record length of the main digital acquisition.

Usage

Using the .query() method will send the HORizontal:DIGital:RECOrdlength:MAIn? query.
Using the .verify(value) method will send the HORizontal:DIGital:RECOrdlength:MAIn? query and raise an AssertionError if the returned value does not match value.

SCPI Syntax

- HORizontal:DIGital:RECOrdlength:MAIn?

HorizontalDigitalSamplerate ¶

Bases: SCPICmdRead

The HORizontal:DIGital:SAMPLERate command.

Description

This command queries the sample rate of the digital acquisition.

Usage

Using the .query() method will send the HORizontal:DIGital:SAMPLERate? query.
Using the .verify(value) method will send the HORizontal:DIGital:SAMPLERate? query and raise an AssertionError if the returned value does not match value.

SCPI Syntax

- HORizontal:DIGital:SAMPLERate?

Properties

.magnivu: The HORizontal:DIGital:SAMPLERate:MAGnivu command.
.main: The HORizontal:DIGital:SAMPLERate:MAIn command.

magnivu `property` ¶

magnivu: HorizontalDigitalSamplerateMagnivu

Return the HORizontal:DIGital:SAMPLERate:MAGnivu command.

Description

Returns the sample rate of the MagniVu digital acquisition.

Usage

Using the .query() method will send the HORizontal:DIGital:SAMPLERate:MAGnivu? query.
Using the .verify(value) method will send the HORizontal:DIGital:SAMPLERate:MAGnivu? query and raise an AssertionError if the returned value does not match value.

SCPI Syntax

- HORizontal:DIGital:SAMPLERate:MAGnivu?

main `property` ¶

main: HorizontalDigitalSamplerateMain

Return the HORizontal:DIGital:SAMPLERate:MAIn command.

Description

Returns the sample rate of the main digital acquisition.

Usage

Using the .query() method will send the HORizontal:DIGital:SAMPLERate:MAIn? query.
Using the .verify(value) method will send the HORizontal:DIGital:SAMPLERate:MAIn? query and raise an AssertionError if the returned value does not match value.

SCPI Syntax

- HORizontal:DIGital:SAMPLERate:MAIn?

HorizontalDigitalSamplerateMagnivu ¶

Bases: SCPICmdRead

The HORizontal:DIGital:SAMPLERate:MAGnivu command.

Description

Returns the sample rate of the MagniVu digital acquisition.

Usage

Using the .query() method will send the HORizontal:DIGital:SAMPLERate:MAGnivu? query.
Using the .verify(value) method will send the HORizontal:DIGital:SAMPLERate:MAGnivu? query and raise an AssertionError if the returned value does not match value.

SCPI Syntax

- HORizontal:DIGital:SAMPLERate:MAGnivu?

HorizontalDigitalSamplerateMain ¶

Bases: SCPICmdRead

The HORizontal:DIGital:SAMPLERate:MAIn command.

Description

Returns the sample rate of the main digital acquisition.

Usage

Using the .query() method will send the HORizontal:DIGital:SAMPLERate:MAIn? query.
Using the .verify(value) method will send the HORizontal:DIGital:SAMPLERate:MAIn? query and raise an AssertionError if the returned value does not match value.

SCPI Syntax

- HORizontal:DIGital:SAMPLERate:MAIn?

HorizontalDivisions ¶

Bases: SCPICmdRead

The HORizontal:DIVisions command.

Description

This query-only command returns the number of graticule divisions.

Usage

Using the .query() method will send the HORizontal:DIVisions? query.
Using the .verify(value) method will send the HORizontal:DIVisions? query and raise an AssertionError if the returned value does not match value.

SCPI Syntax

- HORizontal:DIVisions?

HorizontalFastframe ¶

Bases: SCPICmdRead

The HORizontal:FASTframe command.

Description

This query-only command returns all of the settings for the horizontal FastFrame commands.

Usage

Using the .query() method will send the HORizontal:FASTframe? query.
Using the .verify(value) method will send the HORizontal:FASTframe? query and raise an AssertionError if the returned value does not match value.

SCPI Syntax

- HORizontal:FASTframe?

Properties

.count: The HORizontal:FASTframe:COUNt command.
.framelock: The HORizontal:FASTframe:FRAMELock command.
.length: The HORizontal:FASTframe:LENgth command.
.maxframes: The HORizontal:FASTframe:MAXFRames command.
.multipleframes: The HORizontal:FASTframe:MULtipleframes command tree.
.ref: The HORizontal:FASTframe:REF command tree.
.selected: The HORizontal:FASTframe:SELECTED command tree.
.sequence: The HORizontal:FASTframe:SEQuence command.
.singleframemath: The HORizontal:FASTframe:SINGLEFramemath command.
.sixteenbit: The HORizontal:FASTframe:SIXteenbit command.
.state: The HORizontal:FASTframe:STATE command.
.sumframe: The HORizontal:FASTframe:SUMFrame command.
.timestamp: The HORizontal:FASTframe:TIMEStamp command tree.
.track: The HORizontal:FASTframe:TRACk command.
.xzero: The HORizontal:FASTframe:XZEro command tree.

count `property` ¶

count: HorizontalFastframeCount

Return the HORizontal:FASTframe:COUNt command.

Description

This command sets or queries FastFrame frame count. This command is equivalent to selecting Fast Frame Setup from the Horiz/Acq menu and entering a value in the Frame Count box. FastFrame captures a series of triggered acquisitions with minimal intervening time.

Usage

Using the .query() method will send the HORizontal:FASTframe:COUNt? query.
Using the .verify(value) method will send the HORizontal:FASTframe:COUNt? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the HORizontal:FASTframe:COUNt value command.

SCPI Syntax

- HORizontal:FASTframe:COUNt <NR1>
- HORizontal:FASTframe:COUNt?

Info

<NR1> indicates the number of frames to acquire.

framelock `property` ¶

framelock: HorizontalFastframeFramelock

Return the HORizontal:FASTframe:FRAMELock command.

Description

This command sets or queries FastFrame frame lock.

Usage

Using the .query() method will send the HORizontal:FASTframe:FRAMELock? query.
Using the .verify(value) method will send the HORizontal:FASTframe:FRAMELock? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the HORizontal:FASTframe:FRAMELock value command.

SCPI Syntax

- HORizontal:FASTframe:FRAMELock {ON|OFF|<NR1>}
- HORizontal:FASTframe:FRAMELock?

Info

<ON> enables frame lock.
<OFF> disables frame lock.
<NR1> = 0 disables frame lock; any other value enables framelock.

length `property` ¶

length: HorizontalFastframeLength

Return the HORizontal:FASTframe:LENgth command.

Description

This command sets or queries the horizontal record length to the number of sample points in each frame. This command is equivalent to selecting FastFrame Setup from the Horiz/Acq menu and entering a value in the Rec Length box. FastFrame captures a series of triggered acquisitions with minimal intervening time between them.

Usage

Using the .query() method will send the HORizontal:FASTframe:LENgth? query.
Using the .verify(value) method will send the HORizontal:FASTframe:LENgth? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the HORizontal:FASTframe:LENgth value command.

SCPI Syntax

- HORizontal:FASTframe:LENgth <NR1>
- HORizontal:FASTframe:LENgth?

Info

<NR1> represents the supported value for horizontal record length in Fast Frame mode. In addition, to the allowable record length in normal (single frame) mode, 50 and 250 point record lengths are permitted in Fast Frame mode.

maxframes `property` ¶

maxframes: HorizontalFastframeMaxframes

Return the HORizontal:FASTframe:MAXFRames command.

Description

This query only command returns the maximum number of FastFrame frames which can be acquired at the current frame length.

Usage

Using the .query() method will send the HORizontal:FASTframe:MAXFRames? query.
Using the .verify(value) method will send the HORizontal:FASTframe:MAXFRames? query and raise an AssertionError if the returned value does not match value.

SCPI Syntax

- HORizontal:FASTframe:MAXFRames?

multipleframes `property` ¶

multipleframes: HorizontalFastframeMultipleframes

Return the HORizontal:FASTframe:MULtipleframes command tree.

Usage

Using the .query() method will send the HORizontal:FASTframe:MULtipleframes? query.
Using the .verify(value) method will send the HORizontal:FASTframe:MULtipleframes? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.framestart: The HORizontal:FASTframe:MULtipleframes:FRAMESTart command tree.
.mode: The HORizontal:FASTframe:MULtipleframes:MODe command.
.numframes: The HORizontal:FASTframe:MULtipleframes:NUMFRames command tree.

ref `property` ¶

ref: HorizontalFastframeRef

Return the HORizontal:FASTframe:REF command tree.

Usage

Using the .query() method will send the HORizontal:FASTframe:REF? query.
Using the .verify(value) method will send the HORizontal:FASTframe:REF? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.frame: The HORizontal:FASTframe:REF:FRAme command.
.source: The HORizontal:FASTframe:REF:SOUrce command.

selected `property` ¶

selected: HorizontalFastframeSelected

Return the HORizontal:FASTframe:SELECTED command tree.

Usage

Using the .query() method will send the HORizontal:FASTframe:SELECTED? query.
Using the .verify(value) method will send the HORizontal:FASTframe:SELECTED? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.ch: The HORizontal:FASTframe:SELECTED:CH<x> command.
.math: The HORizontal:FASTframe:SELECTED:MATH<x> command.
.ref: The HORizontal:FASTframe:SELECTED:REF<x> command.
.source: The HORizontal:FASTframe:SELECTED:SOUrce command.

sequence `property` ¶

sequence: HorizontalFastframeSequence

Return the HORizontal:FASTframe:SEQuence command.

Description

This command sets or queries the FastFrame single-sequence mode stop condition.

Usage

Using the .query() method will send the HORizontal:FASTframe:SEQuence? query.
Using the .verify(value) method will send the HORizontal:FASTframe:SEQuence? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the HORizontal:FASTframe:SEQuence value command.

SCPI Syntax

- HORizontal:FASTframe:SEQuence {FIRst|LAST}
- HORizontal:FASTframe:SEQuence?

Info

FIRst sets single sequence to stop after n frames.
LAST sets single sequence to stop manually.

singleframemath `property` ¶

singleframemath: HorizontalFastframeSingleframemath

Return the HORizontal:FASTframe:SINGLEFramemath command.

Description

This command sets or queries FastFrame single frame math.

Usage

Using the .query() method will send the HORizontal:FASTframe:SINGLEFramemath? query.
Using the .verify(value) method will send the HORizontal:FASTframe:SINGLEFramemath? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the HORizontal:FASTframe:SINGLEFramemath value command.

SCPI Syntax

- HORizontal:FASTframe:SINGLEFramemath {ON|OFF|<NR1>}
- HORizontal:FASTframe:SINGLEFramemath?

Info

<NR1> = 0 disables the function; any other value enables it.
OFF disables the function.
ON enables the function.

sixteenbit `property` ¶

sixteenbit: HorizontalFastframeSixteenbit

Return the HORizontal:FASTframe:SIXteenbit command.

Description

This command sets or queries FastFrame sixteen bit.

Usage

Using the .query() method will send the HORizontal:FASTframe:SIXteenbit? query.
Using the .verify(value) method will send the HORizontal:FASTframe:SIXteenbit? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the HORizontal:FASTframe:SIXteenbit value command.

SCPI Syntax

- HORizontal:FASTframe:SIXteenbit {ON|OFF|<NR1>}
- HORizontal:FASTframe:SIXteenbit?

Info

<NR1> = 0 disables the function; any other value enables it.
OFF disables the function. When OFF, fastframe data is 8 bit.
ON enables the function. When ON and when the summary frame is average, the data for the averaged summary frame is 16 bit.

state `property` ¶

state: HorizontalFastframeState

Return the HORizontal:FASTframe:STATE command.

Description

This command sets or queries the state of FastFrame acquisition. This is equivalent to setting FastFrame to On in the FastFrame Setup menu. FastFrame lets users capture a series of triggered acquisitions with minimal time between them. The digitizing instrument in FastFrame mode is ready to accept a continuous burst of triggers 400 ms after the controller sends the ACQUIRE:STATE RUN command.

Usage

Using the .query() method will send the HORizontal:FASTframe:STATE? query.
Using the .verify(value) method will send the HORizontal:FASTframe:STATE? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the HORizontal:FASTframe:STATE value command.

SCPI Syntax

- HORizontal:FASTframe:STATE {ON|OFF|<NR1>}
- HORizontal:FASTframe:STATE?

Info

<NR1> = 0 turns off horizontal FastFrame; any other value turns on horizontal FastFrame.
<ON> turns on horizontal FastFrame.
<OFF> turns off horizontal FastFrame.

sumframe `property` ¶

sumframe: HorizontalFastframeSumframe

Return the HORizontal:FASTframe:SUMFrame command.

Description

This command sets or queries the summary frame mode. When ENVelope is selected, the last frame in a FastFrame acquisition is an envelope of all the prior frames in the acquisition. When AVErage is selected, the last frame is replaced with a frame that is the computed average of all the prior frames in the acquisition. For the summary frame control to be active, the number of frames must be two or greater.

Usage

Using the .query() method will send the HORizontal:FASTframe:SUMFrame? query.
Using the .verify(value) method will send the HORizontal:FASTframe:SUMFrame? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the HORizontal:FASTframe:SUMFrame value command.

SCPI Syntax

- HORizontal:FASTframe:SUMFrame {NONe|AVErage|ENVelope}
- HORizontal:FASTframe:SUMFrame?

Info

NONE turns off the summary mode for FastFrame. This is the default setting.
AVErage argument displays the last frame in a FastFrame acquisition as a frame that is the computed average of all the prior frames in the acquisition.
ENVelope argument displays the last frame in a FastFrame acquisition as an envelope of all the prior frames in the acquisition.

timestamp `property` ¶

timestamp: HorizontalFastframeTimestamp

Return the HORizontal:FASTframe:TIMEStamp command tree.

Usage

Using the .query() method will send the HORizontal:FASTframe:TIMEStamp? query.
Using the .verify(value) method will send the HORizontal:FASTframe:TIMEStamp? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.all: The HORizontal:FASTframe:TIMEStamp:ALL command tree.
.between: The HORizontal:FASTframe:TIMEStamp:BETWeen command tree.
.delta: The HORizontal:FASTframe:TIMEStamp:DELTa command tree.
.frame: The HORizontal:FASTframe:TIMEStamp:FRAMe command tree.
.ref: The HORizontal:FASTframe:TIMEStamp:REF command.
.selected: The HORizontal:FASTframe:TIMEStamp:SELECTED command tree.

track `property` ¶

track: HorizontalFastframeTrack

Return the HORizontal:FASTframe:TRACk command.

Description

This command sets up or queries the state of FastFrame tracking feature. This command is equivalent to selecting FastFrame Setup from the Horiz/Acq menu and then clicking the desired Frame Tracking state. When FastFrame Track is set to ‘live’, the channel and math waveforms are locked together. Adjusting a channel waveform also adjusts a related math waveform. All reference waveforms are also locked together but they are separate from channel and math waveforms. For example, when you set the Selected Frame Source Ch1 to Frame 3, then Selected Frame Ch2, Ch3, Ch4, Math1, Math2, Math3 and Math4 are also set to Frame 3. When you set the Selected Frame Source Ref1 to Frame 2, then Selected Frame Ref2, Ref3 and Ref4 are also set to Frame 2. If the Frame Tracking is set to Live, changing Selected Frame Ch1 will not affect the Selected Frame Ref1 frame of the Reference Frame setting. When FastFrame Track is set to ‘all’, the channel, math and reference waveforms are locked together. Adjusting a channel waveform also adjusts the related math and reference waveforms. For example, when you set the Selected Frame Source Ch1 to Frame 3, then Selected Frame Ch2, Ch3, Ch4, Math1, Math2, Math3, Math4, Ref1, Ref2, Ref3 and Ref4 are also set to Frame 3.

Usage

Using the .query() method will send the HORizontal:FASTframe:TRACk? query.
Using the .verify(value) method will send the HORizontal:FASTframe:TRACk? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the HORizontal:FASTframe:TRACk value command.

SCPI Syntax

- HORizontal:FASTframe:TRACk {LIVE|ALL}
- HORizontal:FASTframe:TRACk?

Info

LIVE sets FastFrame Track to Live.
ALL sets FastFrame Track to All.

xzero `property` ¶

xzero: HorizontalFastframeXzero

Return the HORizontal:FASTframe:XZEro command tree.

Usage

Using the .query() method will send the HORizontal:FASTframe:XZEro? query.
Using the .verify(value) method will send the HORizontal:FASTframe:XZEro? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.all: The HORizontal:FASTframe:XZEro:ALL command tree.
.frame: The HORizontal:FASTframe:XZEro:FRAme command tree.
.ref: The HORizontal:FASTframe:XZEro:REF command.
.selected: The HORizontal:FASTframe:XZEro:SELECTED command tree.

HorizontalFastframeCount ¶

Bases: SCPICmdWrite, SCPICmdRead

The HORizontal:FASTframe:COUNt command.

Description

This command sets or queries FastFrame frame count. This command is equivalent to selecting Fast Frame Setup from the Horiz/Acq menu and entering a value in the Frame Count box. FastFrame captures a series of triggered acquisitions with minimal intervening time.

Usage

Using the .query() method will send the HORizontal:FASTframe:COUNt? query.
Using the .verify(value) method will send the HORizontal:FASTframe:COUNt? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the HORizontal:FASTframe:COUNt value command.

SCPI Syntax

- HORizontal:FASTframe:COUNt <NR1>
- HORizontal:FASTframe:COUNt?

Info

<NR1> indicates the number of frames to acquire.

HorizontalFastframeFramelock ¶

Bases: SCPICmdWrite, SCPICmdRead

The HORizontal:FASTframe:FRAMELock command.

Description

This command sets or queries FastFrame frame lock.

Usage

Using the .query() method will send the HORizontal:FASTframe:FRAMELock? query.
Using the .verify(value) method will send the HORizontal:FASTframe:FRAMELock? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the HORizontal:FASTframe:FRAMELock value command.

SCPI Syntax

- HORizontal:FASTframe:FRAMELock {ON|OFF|<NR1>}
- HORizontal:FASTframe:FRAMELock?

Info

<ON> enables frame lock.
<OFF> disables frame lock.
<NR1> = 0 disables frame lock; any other value enables framelock.

HorizontalFastframeLength ¶

Bases: SCPICmdWrite, SCPICmdRead

The HORizontal:FASTframe:LENgth command.

Description

This command sets or queries the horizontal record length to the number of sample points in each frame. This command is equivalent to selecting FastFrame Setup from the Horiz/Acq menu and entering a value in the Rec Length box. FastFrame captures a series of triggered acquisitions with minimal intervening time between them.

Usage

Using the .query() method will send the HORizontal:FASTframe:LENgth? query.
Using the .verify(value) method will send the HORizontal:FASTframe:LENgth? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the HORizontal:FASTframe:LENgth value command.

SCPI Syntax

- HORizontal:FASTframe:LENgth <NR1>
- HORizontal:FASTframe:LENgth?

Info

<NR1> represents the supported value for horizontal record length in Fast Frame mode. In addition, to the allowable record length in normal (single frame) mode, 50 and 250 point record lengths are permitted in Fast Frame mode.

HorizontalFastframeMaxframes ¶

Bases: SCPICmdRead

The HORizontal:FASTframe:MAXFRames command.

Description

This query only command returns the maximum number of FastFrame frames which can be acquired at the current frame length.

Usage

Using the .query() method will send the HORizontal:FASTframe:MAXFRames? query.
Using the .verify(value) method will send the HORizontal:FASTframe:MAXFRames? query and raise an AssertionError if the returned value does not match value.

SCPI Syntax

- HORizontal:FASTframe:MAXFRames?

HorizontalFastframeMultipleframes ¶

Bases: SCPICmdRead

The HORizontal:FASTframe:MULtipleframes command tree.

Usage

Using the .query() method will send the HORizontal:FASTframe:MULtipleframes? query.
Using the .verify(value) method will send the HORizontal:FASTframe:MULtipleframes? query and raise an AssertionError if the returned value does not match value.

Properties

.framestart: The HORizontal:FASTframe:MULtipleframes:FRAMESTart command tree.
.mode: The HORizontal:FASTframe:MULtipleframes:MODe command.
.numframes: The HORizontal:FASTframe:MULtipleframes:NUMFRames command tree.

framestart `property` ¶

framestart: HorizontalFastframeMultipleframesFramestart

Return the HORizontal:FASTframe:MULtipleframes:FRAMESTart command tree.

Usage

Using the .query() method will send the HORizontal:FASTframe:MULtipleframes:FRAMESTart? query.
Using the .verify(value) method will send the HORizontal:FASTframe:MULtipleframes:FRAMESTart? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.ch: The HORizontal:FASTframe:MULtipleframes:FRAMESTart:CH<x> command.
.math: The HORizontal:FASTframe:MULtipleframes:FRAMESTart:MATH<x> command.
.ref: The HORizontal:FASTframe:MULtipleframes:FRAMESTart:REF<x> command.
.d: The HORizontal:FASTframe:MULtipleframes:FRAMESTart:D<x> command.

mode `property` ¶

mode: HorizontalFastframeMultipleframesMode

Return the HORizontal:FASTframe:MULtipleframes:MODe command.

Description

This command sets or queries the mode for the FastFrame multiple frames feature. This feature displays multiple frames in an overlaid manner.

Usage

Using the .query() method will send the HORizontal:FASTframe:MULtipleframes:MODe? query.
Using the .verify(value) method will send the HORizontal:FASTframe:MULtipleframes:MODe? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the HORizontal:FASTframe:MULtipleframes:MODe value command.

SCPI Syntax

- HORizontal:FASTframe:MULtipleframes:MODe {OFF|OVERlay|ONLYOVERlay}
- HORizontal:FASTframe:MULtipleframes:MODe?

Info

OFF turns off the multiple frames mode.
OVERlay sets the multiple frames mode to overlay.

numframes `property` ¶

numframes: HorizontalFastframeMultipleframesNumframes

Return the HORizontal:FASTframe:MULtipleframes:NUMFRames command tree.

Usage

Using the .query() method will send the HORizontal:FASTframe:MULtipleframes:NUMFRames? query.
Using the .verify(value) method will send the HORizontal:FASTframe:MULtipleframes:NUMFRames? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.ch: The HORizontal:FASTframe:MULtipleframes:NUMFRames:CH<x> command.
.math: The HORizontal:FASTframe:MULtipleframes:NUMFRames:MATH<x> command.
.ref: The HORizontal:FASTframe:MULtipleframes:NUMFRames:REF<x> command.
.d: The HORizontal:FASTframe:MULtipleframes:NUMFRames:D<x> command.

HorizontalFastframeMultipleframesFramestart ¶

Bases: SCPICmdRead

The HORizontal:FASTframe:MULtipleframes:FRAMESTart command tree.

Usage

Using the .query() method will send the HORizontal:FASTframe:MULtipleframes:FRAMESTart? query.
Using the .verify(value) method will send the HORizontal:FASTframe:MULtipleframes:FRAMESTart? query and raise an AssertionError if the returned value does not match value.

Properties

.ch: The HORizontal:FASTframe:MULtipleframes:FRAMESTart:CH<x> command.
.math: The HORizontal:FASTframe:MULtipleframes:FRAMESTart:MATH<x> command.
.ref: The HORizontal:FASTframe:MULtipleframes:FRAMESTart:REF<x> command.
.d: The HORizontal:FASTframe:MULtipleframes:FRAMESTart:D<x> command.

ch `property` ¶

ch: dict[int, HorizontalFastframeMultipleframesFramestartChannel]

Return the HORizontal:FASTframe:MULtipleframes:FRAMESTart:CH<x> command.

Description

This command sets or queries the start frame number on the specified waveform for the FastFrame multiple frames feature. Valid waveforms include CH, MATH, and REF. The value of x can be an integer ranging from 1 through 4. The multiple frames feature supports displaying multiple frames in an overlaid manner.

Usage

Using the .query() method will send the HORizontal:FASTframe:MULtipleframes:FRAMESTart:CH<x>? query.
Using the .verify(value) method will send the HORizontal:FASTframe:MULtipleframes:FRAMESTart:CH<x>? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the HORizontal:FASTframe:MULtipleframes:FRAMESTart:CH<x> value command.

SCPI Syntax

- HORizontal:FASTframe:MULtipleframes:FRAMESTart:CH<x> <NR1>
- HORizontal:FASTframe:MULtipleframes:FRAMESTart:CH<x>?

Info

<NR1> specifies the start frame number on the specified waveform.

d `property` ¶

d: dict[int, HorizontalFastframeMultipleframesFramestartDigitalBit]

Return the HORizontal:FASTframe:MULtipleframes:FRAMESTart:D<x> command.

Description

This command sets or queries the start frame number on the specified waveform for the FastFrame multiple frames feature. Valid waveforms include CH, MATH, and REF. The value of x can be an integer ranging from 1 through 4. The multiple frames feature supports displaying multiple frames in an overlaid manner.

Usage

Using the .query() method will send the HORizontal:FASTframe:MULtipleframes:FRAMESTart:D<x>? query.
Using the .verify(value) method will send the HORizontal:FASTframe:MULtipleframes:FRAMESTart:D<x>? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the HORizontal:FASTframe:MULtipleframes:FRAMESTart:D<x> value command.

SCPI Syntax

- HORizontal:FASTframe:MULtipleframes:FRAMESTart:D<x> <NR1>
- HORizontal:FASTframe:MULtipleframes:FRAMESTart:D<x>?

Info

<NR1> specifies the start frame number on the specified waveform.

math `property` ¶

math: dict[int, HorizontalFastframeMultipleframesFramestartMathItem]

Return the HORizontal:FASTframe:MULtipleframes:FRAMESTart:MATH<x> command.

Description

This command sets or queries the start frame number on the specified waveform for the FastFrame multiple frames feature. Valid waveforms include CH, MATH, and REF. The value of x can be an integer ranging from 1 through 4. The multiple frames feature supports displaying multiple frames in an overlaid manner.

Usage

Using the .query() method will send the HORizontal:FASTframe:MULtipleframes:FRAMESTart:MATH<x>? query.
Using the .verify(value) method will send the HORizontal:FASTframe:MULtipleframes:FRAMESTart:MATH<x>? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the HORizontal:FASTframe:MULtipleframes:FRAMESTart:MATH<x> value command.

SCPI Syntax

- HORizontal:FASTframe:MULtipleframes:FRAMESTart:MATH<x> <NR1>
- HORizontal:FASTframe:MULtipleframes:FRAMESTart:MATH<x>?

Info

<NR1> specifies the start frame number on the specified waveform.

ref `property` ¶

ref: dict[int, HorizontalFastframeMultipleframesFramestartRefItem]

Return the HORizontal:FASTframe:MULtipleframes:FRAMESTart:REF<x> command.

Description

This command sets or queries the start frame number on the specified waveform for the FastFrame multiple frames feature. Valid waveforms include CH, MATH, and REF. The value of x can be an integer ranging from 1 through 4. The multiple frames feature supports displaying multiple frames in an overlaid manner.

Usage

Using the .query() method will send the HORizontal:FASTframe:MULtipleframes:FRAMESTart:REF<x>? query.
Using the .verify(value) method will send the HORizontal:FASTframe:MULtipleframes:FRAMESTart:REF<x>? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the HORizontal:FASTframe:MULtipleframes:FRAMESTart:REF<x> value command.

SCPI Syntax

- HORizontal:FASTframe:MULtipleframes:FRAMESTart:REF<x> <NR1>
- HORizontal:FASTframe:MULtipleframes:FRAMESTart:REF<x>?

Info

<NR1> specifies the start frame number on the specified waveform.

HorizontalFastframeMultipleframesFramestartChannel ¶

Bases: ValidatedChannel, SCPICmdWrite, SCPICmdRead

The HORizontal:FASTframe:MULtipleframes:FRAMESTart:CH<x> command.

Description

This command sets or queries the start frame number on the specified waveform for the FastFrame multiple frames feature. Valid waveforms include CH, MATH, and REF. The value of x can be an integer ranging from 1 through 4. The multiple frames feature supports displaying multiple frames in an overlaid manner.

Usage

Using the .query() method will send the HORizontal:FASTframe:MULtipleframes:FRAMESTart:CH<x>? query.
Using the .verify(value) method will send the HORizontal:FASTframe:MULtipleframes:FRAMESTart:CH<x>? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the HORizontal:FASTframe:MULtipleframes:FRAMESTart:CH<x> value command.

SCPI Syntax

- HORizontal:FASTframe:MULtipleframes:FRAMESTart:CH<x> <NR1>
- HORizontal:FASTframe:MULtipleframes:FRAMESTart:CH<x>?

Info

<NR1> specifies the start frame number on the specified waveform.

HorizontalFastframeMultipleframesFramestartDigitalBit ¶

Bases: ValidatedDigitalBit, SCPICmdWrite, SCPICmdRead

The HORizontal:FASTframe:MULtipleframes:FRAMESTart:D<x> command.

Description

This command sets or queries the start frame number on the specified waveform for the FastFrame multiple frames feature. Valid waveforms include CH, MATH, and REF. The value of x can be an integer ranging from 1 through 4. The multiple frames feature supports displaying multiple frames in an overlaid manner.

Usage

Using the .query() method will send the HORizontal:FASTframe:MULtipleframes:FRAMESTart:D<x>? query.
Using the .verify(value) method will send the HORizontal:FASTframe:MULtipleframes:FRAMESTart:D<x>? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the HORizontal:FASTframe:MULtipleframes:FRAMESTart:D<x> value command.

SCPI Syntax

- HORizontal:FASTframe:MULtipleframes:FRAMESTart:D<x> <NR1>
- HORizontal:FASTframe:MULtipleframes:FRAMESTart:D<x>?

Info

<NR1> specifies the start frame number on the specified waveform.

HorizontalFastframeMultipleframesFramestartMathItem ¶

Bases: ValidatedDynamicNumberCmd, SCPICmdWrite, SCPICmdRead

The HORizontal:FASTframe:MULtipleframes:FRAMESTart:MATH<x> command.

Description

This command sets or queries the start frame number on the specified waveform for the FastFrame multiple frames feature. Valid waveforms include CH, MATH, and REF. The value of x can be an integer ranging from 1 through 4. The multiple frames feature supports displaying multiple frames in an overlaid manner.

Usage

Using the .query() method will send the HORizontal:FASTframe:MULtipleframes:FRAMESTart:MATH<x>? query.
Using the .verify(value) method will send the HORizontal:FASTframe:MULtipleframes:FRAMESTart:MATH<x>? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the HORizontal:FASTframe:MULtipleframes:FRAMESTart:MATH<x> value command.

SCPI Syntax

- HORizontal:FASTframe:MULtipleframes:FRAMESTart:MATH<x> <NR1>
- HORizontal:FASTframe:MULtipleframes:FRAMESTart:MATH<x>?

Info

<NR1> specifies the start frame number on the specified waveform.

HorizontalFastframeMultipleframesFramestartRefItem ¶

Bases: ValidatedDynamicNumberCmd, SCPICmdWrite, SCPICmdRead

The HORizontal:FASTframe:MULtipleframes:FRAMESTart:REF<x> command.

Description

This command sets or queries the start frame number on the specified waveform for the FastFrame multiple frames feature. Valid waveforms include CH, MATH, and REF. The value of x can be an integer ranging from 1 through 4. The multiple frames feature supports displaying multiple frames in an overlaid manner.

Usage

Using the .query() method will send the HORizontal:FASTframe:MULtipleframes:FRAMESTart:REF<x>? query.
Using the .verify(value) method will send the HORizontal:FASTframe:MULtipleframes:FRAMESTart:REF<x>? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the HORizontal:FASTframe:MULtipleframes:FRAMESTart:REF<x> value command.

SCPI Syntax

- HORizontal:FASTframe:MULtipleframes:FRAMESTart:REF<x> <NR1>
- HORizontal:FASTframe:MULtipleframes:FRAMESTart:REF<x>?

Info

<NR1> specifies the start frame number on the specified waveform.

HorizontalFastframeMultipleframesMode ¶

Bases: SCPICmdWrite, SCPICmdRead

The HORizontal:FASTframe:MULtipleframes:MODe command.

Description

This command sets or queries the mode for the FastFrame multiple frames feature. This feature displays multiple frames in an overlaid manner.

Usage

Using the .query() method will send the HORizontal:FASTframe:MULtipleframes:MODe? query.
Using the .verify(value) method will send the HORizontal:FASTframe:MULtipleframes:MODe? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the HORizontal:FASTframe:MULtipleframes:MODe value command.

SCPI Syntax

- HORizontal:FASTframe:MULtipleframes:MODe {OFF|OVERlay|ONLYOVERlay}
- HORizontal:FASTframe:MULtipleframes:MODe?

Info

OFF turns off the multiple frames mode.
OVERlay sets the multiple frames mode to overlay.

HorizontalFastframeMultipleframesNumframes ¶

Bases: SCPICmdRead

The HORizontal:FASTframe:MULtipleframes:NUMFRames command tree.

Usage

Using the .query() method will send the HORizontal:FASTframe:MULtipleframes:NUMFRames? query.
Using the .verify(value) method will send the HORizontal:FASTframe:MULtipleframes:NUMFRames? query and raise an AssertionError if the returned value does not match value.

Properties

.ch: The HORizontal:FASTframe:MULtipleframes:NUMFRames:CH<x> command.
.math: The HORizontal:FASTframe:MULtipleframes:NUMFRames:MATH<x> command.
.ref: The HORizontal:FASTframe:MULtipleframes:NUMFRames:REF<x> command.
.d: The HORizontal:FASTframe:MULtipleframes:NUMFRames:D<x> command.

ch `property` ¶

ch: dict[int, HorizontalFastframeMultipleframesNumframesChannel]

Return the HORizontal:FASTframe:MULtipleframes:NUMFRames:CH<x> command.

Description

This command sets or queries the number of frames on the specified waveform for the FastFrame multiple frames feature. The multiple frames feature supports displaying multiple frames in an overlaid manner. Valid waveforms include CH, MATH and REF. The x variable can be expressed as an integer ranging from 1 through 4.

Usage

Using the .query() method will send the HORizontal:FASTframe:MULtipleframes:NUMFRames:CH<x>? query.
Using the .verify(value) method will send the HORizontal:FASTframe:MULtipleframes:NUMFRames:CH<x>? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the HORizontal:FASTframe:MULtipleframes:NUMFRames:CH<x> value command.

SCPI Syntax

- HORizontal:FASTframe:MULtipleframes:NUMFRames:CH<x> <NR1>
- HORizontal:FASTframe:MULtipleframes:NUMFRames:CH<x>?

Info

<NR1> represents the number of frames on the specified waveform.

d `property` ¶

d: dict[int, HorizontalFastframeMultipleframesNumframesDigitalBit]

Return the HORizontal:FASTframe:MULtipleframes:NUMFRames:D<x> command.

Description

This command sets or queries the number of frames on the specified waveform for the FastFrame multiple frames feature. The multiple frames feature supports displaying multiple frames in an overlaid manner. Valid waveforms include CH, MATH and REF. The x variable can be expressed as an integer ranging from 1 through 4.

Usage

Using the .query() method will send the HORizontal:FASTframe:MULtipleframes:NUMFRames:D<x>? query.
Using the .verify(value) method will send the HORizontal:FASTframe:MULtipleframes:NUMFRames:D<x>? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the HORizontal:FASTframe:MULtipleframes:NUMFRames:D<x> value command.

SCPI Syntax

- HORizontal:FASTframe:MULtipleframes:NUMFRames:D<x> <NR1>
- HORizontal:FASTframe:MULtipleframes:NUMFRames:D<x>?

Info

<NR1> represents the number of frames on the specified waveform.

math `property` ¶

math: dict[int, HorizontalFastframeMultipleframesNumframesMathItem]

Return the HORizontal:FASTframe:MULtipleframes:NUMFRames:MATH<x> command.

Description

This command sets or queries the number of frames on the specified waveform for the FastFrame multiple frames feature. The multiple frames feature supports displaying multiple frames in an overlaid manner. Valid waveforms include CH, MATH and REF. The x variable can be expressed as an integer ranging from 1 through 4.

Usage

Using the .query() method will send the HORizontal:FASTframe:MULtipleframes:NUMFRames:MATH<x>? query.
Using the .verify(value) method will send the HORizontal:FASTframe:MULtipleframes:NUMFRames:MATH<x>? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the HORizontal:FASTframe:MULtipleframes:NUMFRames:MATH<x> value command.

SCPI Syntax

- HORizontal:FASTframe:MULtipleframes:NUMFRames:MATH<x> <NR1>
- HORizontal:FASTframe:MULtipleframes:NUMFRames:MATH<x>?

Info

<NR1> represents the number of frames on the specified waveform.

ref `property` ¶

ref: dict[int, HorizontalFastframeMultipleframesNumframesRefItem]

Return the HORizontal:FASTframe:MULtipleframes:NUMFRames:REF<x> command.

Description

This command sets or queries the number of frames on the specified waveform for the FastFrame multiple frames feature. The multiple frames feature supports displaying multiple frames in an overlaid manner. Valid waveforms include CH, MATH and REF. The x variable can be expressed as an integer ranging from 1 through 4.

Usage

Using the .query() method will send the HORizontal:FASTframe:MULtipleframes:NUMFRames:REF<x>? query.
Using the .verify(value) method will send the HORizontal:FASTframe:MULtipleframes:NUMFRames:REF<x>? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the HORizontal:FASTframe:MULtipleframes:NUMFRames:REF<x> value command.

SCPI Syntax

- HORizontal:FASTframe:MULtipleframes:NUMFRames:REF<x> <NR1>
- HORizontal:FASTframe:MULtipleframes:NUMFRames:REF<x>?

Info

<NR1> represents the number of frames on the specified waveform.

HorizontalFastframeMultipleframesNumframesChannel ¶

Bases: ValidatedChannel, SCPICmdWrite, SCPICmdRead

The HORizontal:FASTframe:MULtipleframes:NUMFRames:CH<x> command.

Description

This command sets or queries the number of frames on the specified waveform for the FastFrame multiple frames feature. The multiple frames feature supports displaying multiple frames in an overlaid manner. Valid waveforms include CH, MATH and REF. The x variable can be expressed as an integer ranging from 1 through 4.

Usage

Using the .query() method will send the HORizontal:FASTframe:MULtipleframes:NUMFRames:CH<x>? query.
Using the .verify(value) method will send the HORizontal:FASTframe:MULtipleframes:NUMFRames:CH<x>? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the HORizontal:FASTframe:MULtipleframes:NUMFRames:CH<x> value command.

SCPI Syntax

- HORizontal:FASTframe:MULtipleframes:NUMFRames:CH<x> <NR1>
- HORizontal:FASTframe:MULtipleframes:NUMFRames:CH<x>?

Info

<NR1> represents the number of frames on the specified waveform.

HorizontalFastframeMultipleframesNumframesDigitalBit ¶

Bases: ValidatedDigitalBit, SCPICmdWrite, SCPICmdRead

The HORizontal:FASTframe:MULtipleframes:NUMFRames:D<x> command.

Description

This command sets or queries the number of frames on the specified waveform for the FastFrame multiple frames feature. The multiple frames feature supports displaying multiple frames in an overlaid manner. Valid waveforms include CH, MATH and REF. The x variable can be expressed as an integer ranging from 1 through 4.

Usage

Using the .query() method will send the HORizontal:FASTframe:MULtipleframes:NUMFRames:D<x>? query.
Using the .verify(value) method will send the HORizontal:FASTframe:MULtipleframes:NUMFRames:D<x>? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the HORizontal:FASTframe:MULtipleframes:NUMFRames:D<x> value command.

SCPI Syntax

- HORizontal:FASTframe:MULtipleframes:NUMFRames:D<x> <NR1>
- HORizontal:FASTframe:MULtipleframes:NUMFRames:D<x>?

Info

<NR1> represents the number of frames on the specified waveform.

HorizontalFastframeMultipleframesNumframesMathItem ¶

Bases: ValidatedDynamicNumberCmd, SCPICmdWrite, SCPICmdRead

The HORizontal:FASTframe:MULtipleframes:NUMFRames:MATH<x> command.

Description

This command sets or queries the number of frames on the specified waveform for the FastFrame multiple frames feature. The multiple frames feature supports displaying multiple frames in an overlaid manner. Valid waveforms include CH, MATH and REF. The x variable can be expressed as an integer ranging from 1 through 4.

Usage

Using the .query() method will send the HORizontal:FASTframe:MULtipleframes:NUMFRames:MATH<x>? query.
Using the .verify(value) method will send the HORizontal:FASTframe:MULtipleframes:NUMFRames:MATH<x>? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the HORizontal:FASTframe:MULtipleframes:NUMFRames:MATH<x> value command.

SCPI Syntax

- HORizontal:FASTframe:MULtipleframes:NUMFRames:MATH<x> <NR1>
- HORizontal:FASTframe:MULtipleframes:NUMFRames:MATH<x>?

Info

<NR1> represents the number of frames on the specified waveform.

HorizontalFastframeMultipleframesNumframesRefItem ¶

Bases: ValidatedDynamicNumberCmd, SCPICmdWrite, SCPICmdRead

The HORizontal:FASTframe:MULtipleframes:NUMFRames:REF<x> command.

Description

This command sets or queries the number of frames on the specified waveform for the FastFrame multiple frames feature. The multiple frames feature supports displaying multiple frames in an overlaid manner. Valid waveforms include CH, MATH and REF. The x variable can be expressed as an integer ranging from 1 through 4.

Usage

Using the .query() method will send the HORizontal:FASTframe:MULtipleframes:NUMFRames:REF<x>? query.
Using the .verify(value) method will send the HORizontal:FASTframe:MULtipleframes:NUMFRames:REF<x>? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the HORizontal:FASTframe:MULtipleframes:NUMFRames:REF<x> value command.

SCPI Syntax

- HORizontal:FASTframe:MULtipleframes:NUMFRames:REF<x> <NR1>
- HORizontal:FASTframe:MULtipleframes:NUMFRames:REF<x>?

Info

<NR1> represents the number of frames on the specified waveform.

HorizontalFastframeRef ¶

Bases: SCPICmdRead

The HORizontal:FASTframe:REF command tree.

Usage

Using the .query() method will send the HORizontal:FASTframe:REF? query.
Using the .verify(value) method will send the HORizontal:FASTframe:REF? query and raise an AssertionError if the returned value does not match value.

Properties

.frame: The HORizontal:FASTframe:REF:FRAme command.
.source: The HORizontal:FASTframe:REF:SOUrce command.

frame `property` ¶

frame: HorizontalFastframeRefFrame

Return the HORizontal:FASTframe:REF:FRAme command.

Description

This command sets or queries the FastFrame reference frame number. The Reference Frame number is used to calculate time differences for each frame and displays those differences in the graticule. This command is equivalent to selecting FastFrame Setup in the Horiz/Acq menu and entering a value in the Time Stamps/Frame box.

Usage

Using the .query() method will send the HORizontal:FASTframe:REF:FRAme? query.
Using the .verify(value) method will send the HORizontal:FASTframe:REF:FRAme? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the HORizontal:FASTframe:REF:FRAme value command.

SCPI Syntax

- HORizontal:FASTframe:REF:FRAme <NR1>
- HORizontal:FASTframe:REF:FRAme?

Info

<NR1> specifies the FastFrame reference frame.

source `property` ¶

source: HorizontalFastframeRefSource

Return the HORizontal:FASTframe:REF:SOUrce command.

Description

This command sets or queries FastFrame Reference waveform source. This is equivalent to selecting FastFrame Setup from the Horiz/Acq menu and choosing the referenc e source.

Usage

Using the .query() method will send the HORizontal:FASTframe:REF:SOUrce? query.
Using the .verify(value) method will send the HORizontal:FASTframe:REF:SOUrce? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the HORizontal:FASTframe:REF:SOUrce value command.

SCPI Syntax

- HORizontal:FASTframe:REF:SOUrce <wfm>
- HORizontal:FASTframe:REF:SOUrce?

Info

<wfm> specifies the FastFrame Reference waveform source. Valid waveforms include CH and MATH The x variable can be expressed as an integer ranging from 1 through 4.

HorizontalFastframeRefFrame ¶

Bases: SCPICmdWrite, SCPICmdRead

The HORizontal:FASTframe:REF:FRAme command.

Description

This command sets or queries the FastFrame reference frame number. The Reference Frame number is used to calculate time differences for each frame and displays those differences in the graticule. This command is equivalent to selecting FastFrame Setup in the Horiz/Acq menu and entering a value in the Time Stamps/Frame box.

Usage

Using the .query() method will send the HORizontal:FASTframe:REF:FRAme? query.
Using the .verify(value) method will send the HORizontal:FASTframe:REF:FRAme? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the HORizontal:FASTframe:REF:FRAme value command.

SCPI Syntax

- HORizontal:FASTframe:REF:FRAme <NR1>
- HORizontal:FASTframe:REF:FRAme?

Info

<NR1> specifies the FastFrame reference frame.

HorizontalFastframeRefSource ¶

Bases: SCPICmdWrite, SCPICmdRead

The HORizontal:FASTframe:REF:SOUrce command.

Description

This command sets or queries FastFrame Reference waveform source. This is equivalent to selecting FastFrame Setup from the Horiz/Acq menu and choosing the referenc e source.

Usage

Using the .query() method will send the HORizontal:FASTframe:REF:SOUrce? query.
Using the .verify(value) method will send the HORizontal:FASTframe:REF:SOUrce? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the HORizontal:FASTframe:REF:SOUrce value command.

SCPI Syntax

- HORizontal:FASTframe:REF:SOUrce <wfm>
- HORizontal:FASTframe:REF:SOUrce?

Info

<wfm> specifies the FastFrame Reference waveform source. Valid waveforms include CH and MATH The x variable can be expressed as an integer ranging from 1 through 4.

HorizontalFastframeSelected ¶

Bases: SCPICmdRead

The HORizontal:FASTframe:SELECTED command tree.

Usage

Using the .query() method will send the HORizontal:FASTframe:SELECTED? query.
Using the .verify(value) method will send the HORizontal:FASTframe:SELECTED? query and raise an AssertionError if the returned value does not match value.

Properties

.ch: The HORizontal:FASTframe:SELECTED:CH<x> command.
.math: The HORizontal:FASTframe:SELECTED:MATH<x> command.
.ref: The HORizontal:FASTframe:SELECTED:REF<x> command.
.source: The HORizontal:FASTframe:SELECTED:SOUrce command.

ch `property` ¶

ch: dict[int, HorizontalFastframeSelectedChannel]

Return the HORizontal:FASTframe:SELECTED:CH<x> command.

Description

This command sets or queries the FastFrame selected frame number on the specified waveform.

Usage

Using the .query() method will send the HORizontal:FASTframe:SELECTED:CH<x>? query.
Using the .verify(value) method will send the HORizontal:FASTframe:SELECTED:CH<x>? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the HORizontal:FASTframe:SELECTED:CH<x> value command.

SCPI Syntax

- HORizontal:FASTframe:SELECTED:CH<x> <NRF>
- HORizontal:FASTframe:SELECTED:CH<x>?

Info

<NRF> is the selected frame number.

math `property` ¶

math: dict[int, HorizontalFastframeSelectedMathItem]

Return the HORizontal:FASTframe:SELECTED:MATH<x> command.

Description

This command sets or queries the FastFrame selected frame number on the specified waveform.

Usage

Using the .query() method will send the HORizontal:FASTframe:SELECTED:MATH<x>? query.
Using the .verify(value) method will send the HORizontal:FASTframe:SELECTED:MATH<x>? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the HORizontal:FASTframe:SELECTED:MATH<x> value command.

SCPI Syntax

- HORizontal:FASTframe:SELECTED:MATH<x> <NRF>
- HORizontal:FASTframe:SELECTED:MATH<x>?

Info

<NRF> is the selected frame number.

ref `property` ¶

ref: dict[int, HorizontalFastframeSelectedRefItem]

Return the HORizontal:FASTframe:SELECTED:REF<x> command.

Description

This command sets or queries the FastFrame selected frame number on the specified waveform.

Usage

Using the .query() method will send the HORizontal:FASTframe:SELECTED:REF<x>? query.
Using the .verify(value) method will send the HORizontal:FASTframe:SELECTED:REF<x>? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the HORizontal:FASTframe:SELECTED:REF<x> value command.

SCPI Syntax

- HORizontal:FASTframe:SELECTED:REF<x> <NRF>
- HORizontal:FASTframe:SELECTED:REF<x>?

Info

<NRF> is the selected frame number.

source `property` ¶

source: HorizontalFastframeSelectedSource

Return the HORizontal:FASTframe:SELECTED:SOUrce command.

Description

This command sets or queries the FastFrame source waveform. This is equivalent to selecting FastFrame Setup from the Horiz/Acq menu, and then choosing the waveform source. Valid waveforms include CH and MATH. The x variable can be expressed as an integer ranging from 1 through 4.

Usage

Using the .query() method will send the HORizontal:FASTframe:SELECTED:SOUrce? query.
Using the .verify(value) method will send the HORizontal:FASTframe:SELECTED:SOUrce? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the HORizontal:FASTframe:SELECTED:SOUrce value command.

SCPI Syntax

- HORizontal:FASTframe:SELECTED:SOUrce <NR1>
- HORizontal:FASTframe:SELECTED:SOUrce?

Info

<NR1> specifies the selected frame number on the specified waveform.

HorizontalFastframeSelectedChannel ¶

Bases: ValidatedChannel, SCPICmdWrite, SCPICmdRead

The HORizontal:FASTframe:SELECTED:CH<x> command.

Description

This command sets or queries the FastFrame selected frame number on the specified waveform.

Usage

Using the .query() method will send the HORizontal:FASTframe:SELECTED:CH<x>? query.
Using the .verify(value) method will send the HORizontal:FASTframe:SELECTED:CH<x>? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the HORizontal:FASTframe:SELECTED:CH<x> value command.

SCPI Syntax

- HORizontal:FASTframe:SELECTED:CH<x> <NRF>
- HORizontal:FASTframe:SELECTED:CH<x>?

Info

<NRF> is the selected frame number.

HorizontalFastframeSelectedMathItem ¶

Bases: ValidatedDynamicNumberCmd, SCPICmdWrite, SCPICmdRead

The HORizontal:FASTframe:SELECTED:MATH<x> command.

Description

This command sets or queries the FastFrame selected frame number on the specified waveform.

Usage

Using the .query() method will send the HORizontal:FASTframe:SELECTED:MATH<x>? query.
Using the .verify(value) method will send the HORizontal:FASTframe:SELECTED:MATH<x>? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the HORizontal:FASTframe:SELECTED:MATH<x> value command.

SCPI Syntax

- HORizontal:FASTframe:SELECTED:MATH<x> <NRF>
- HORizontal:FASTframe:SELECTED:MATH<x>?

Info

<NRF> is the selected frame number.

HorizontalFastframeSelectedRefItem ¶

Bases: ValidatedDynamicNumberCmd, SCPICmdWrite, SCPICmdRead

The HORizontal:FASTframe:SELECTED:REF<x> command.

Description

This command sets or queries the FastFrame selected frame number on the specified waveform.

Usage

Using the .query() method will send the HORizontal:FASTframe:SELECTED:REF<x>? query.
Using the .verify(value) method will send the HORizontal:FASTframe:SELECTED:REF<x>? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the HORizontal:FASTframe:SELECTED:REF<x> value command.

SCPI Syntax

- HORizontal:FASTframe:SELECTED:REF<x> <NRF>
- HORizontal:FASTframe:SELECTED:REF<x>?

Info

<NRF> is the selected frame number.

HorizontalFastframeSelectedSource ¶

Bases: SCPICmdWrite, SCPICmdRead

The HORizontal:FASTframe:SELECTED:SOUrce command.

Description

This command sets or queries the FastFrame source waveform. This is equivalent to selecting FastFrame Setup from the Horiz/Acq menu, and then choosing the waveform source. Valid waveforms include CH and MATH. The x variable can be expressed as an integer ranging from 1 through 4.

Usage

Using the .query() method will send the HORizontal:FASTframe:SELECTED:SOUrce? query.
Using the .verify(value) method will send the HORizontal:FASTframe:SELECTED:SOUrce? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the HORizontal:FASTframe:SELECTED:SOUrce value command.

SCPI Syntax

- HORizontal:FASTframe:SELECTED:SOUrce <NR1>
- HORizontal:FASTframe:SELECTED:SOUrce?

Info

<NR1> specifies the selected frame number on the specified waveform.

HorizontalFastframeSequence ¶

Bases: SCPICmdWrite, SCPICmdRead

The HORizontal:FASTframe:SEQuence command.

Description

This command sets or queries the FastFrame single-sequence mode stop condition.

Usage

Using the .query() method will send the HORizontal:FASTframe:SEQuence? query.
Using the .verify(value) method will send the HORizontal:FASTframe:SEQuence? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the HORizontal:FASTframe:SEQuence value command.

SCPI Syntax

- HORizontal:FASTframe:SEQuence {FIRst|LAST}
- HORizontal:FASTframe:SEQuence?

Info

FIRst sets single sequence to stop after n frames.
LAST sets single sequence to stop manually.

HorizontalFastframeSingleframemath ¶

Bases: SCPICmdWrite, SCPICmdRead

The HORizontal:FASTframe:SINGLEFramemath command.

Description

This command sets or queries FastFrame single frame math.

Usage

Using the .query() method will send the HORizontal:FASTframe:SINGLEFramemath? query.
Using the .verify(value) method will send the HORizontal:FASTframe:SINGLEFramemath? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the HORizontal:FASTframe:SINGLEFramemath value command.

SCPI Syntax

- HORizontal:FASTframe:SINGLEFramemath {ON|OFF|<NR1>}
- HORizontal:FASTframe:SINGLEFramemath?

Info

<NR1> = 0 disables the function; any other value enables it.
OFF disables the function.
ON enables the function.

HorizontalFastframeSixteenbit ¶

Bases: SCPICmdWrite, SCPICmdRead

The HORizontal:FASTframe:SIXteenbit command.

Description

This command sets or queries FastFrame sixteen bit.

Usage

Using the .query() method will send the HORizontal:FASTframe:SIXteenbit? query.
Using the .verify(value) method will send the HORizontal:FASTframe:SIXteenbit? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the HORizontal:FASTframe:SIXteenbit value command.

SCPI Syntax

- HORizontal:FASTframe:SIXteenbit {ON|OFF|<NR1>}
- HORizontal:FASTframe:SIXteenbit?

Info

<NR1> = 0 disables the function; any other value enables it.
OFF disables the function. When OFF, fastframe data is 8 bit.
ON enables the function. When ON and when the summary frame is average, the data for the averaged summary frame is 16 bit.

HorizontalFastframeState ¶

Bases: SCPICmdWrite, SCPICmdRead

The HORizontal:FASTframe:STATE command.

Description

This command sets or queries the state of FastFrame acquisition. This is equivalent to setting FastFrame to On in the FastFrame Setup menu. FastFrame lets users capture a series of triggered acquisitions with minimal time between them. The digitizing instrument in FastFrame mode is ready to accept a continuous burst of triggers 400 ms after the controller sends the ACQUIRE:STATE RUN command.

Usage

Using the .query() method will send the HORizontal:FASTframe:STATE? query.
Using the .verify(value) method will send the HORizontal:FASTframe:STATE? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the HORizontal:FASTframe:STATE value command.

SCPI Syntax

- HORizontal:FASTframe:STATE {ON|OFF|<NR1>}
- HORizontal:FASTframe:STATE?

Info

<NR1> = 0 turns off horizontal FastFrame; any other value turns on horizontal FastFrame.
<ON> turns on horizontal FastFrame.
<OFF> turns off horizontal FastFrame.

HorizontalFastframeSumframe ¶

Bases: SCPICmdWrite, SCPICmdRead

The HORizontal:FASTframe:SUMFrame command.

Description

This command sets or queries the summary frame mode. When ENVelope is selected, the last frame in a FastFrame acquisition is an envelope of all the prior frames in the acquisition. When AVErage is selected, the last frame is replaced with a frame that is the computed average of all the prior frames in the acquisition. For the summary frame control to be active, the number of frames must be two or greater.

Usage

Using the .query() method will send the HORizontal:FASTframe:SUMFrame? query.
Using the .verify(value) method will send the HORizontal:FASTframe:SUMFrame? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the HORizontal:FASTframe:SUMFrame value command.

SCPI Syntax

- HORizontal:FASTframe:SUMFrame {NONe|AVErage|ENVelope}
- HORizontal:FASTframe:SUMFrame?

Info

NONE turns off the summary mode for FastFrame. This is the default setting.
AVErage argument displays the last frame in a FastFrame acquisition as a frame that is the computed average of all the prior frames in the acquisition.
ENVelope argument displays the last frame in a FastFrame acquisition as an envelope of all the prior frames in the acquisition.

HorizontalFastframeTimestamp ¶

Bases: SCPICmdRead

The HORizontal:FASTframe:TIMEStamp command tree.

Usage

Using the .query() method will send the HORizontal:FASTframe:TIMEStamp? query.
Using the .verify(value) method will send the HORizontal:FASTframe:TIMEStamp? query and raise an AssertionError if the returned value does not match value.

Properties

.all: The HORizontal:FASTframe:TIMEStamp:ALL command tree.
.between: The HORizontal:FASTframe:TIMEStamp:BETWeen command tree.
.delta: The HORizontal:FASTframe:TIMEStamp:DELTa command tree.
.frame: The HORizontal:FASTframe:TIMEStamp:FRAMe command tree.
.ref: The HORizontal:FASTframe:TIMEStamp:REF command.
.selected: The HORizontal:FASTframe:TIMEStamp:SELECTED command tree.

all `property` ¶

all: HorizontalFastframeTimestampAll

Return the HORizontal:FASTframe:TIMEStamp:ALL command tree.

Usage

Using the .query() method will send the HORizontal:FASTframe:TIMEStamp:ALL? query.
Using the .verify(value) method will send the HORizontal:FASTframe:TIMEStamp:ALL? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.ch: The HORizontal:FASTframe:TIMEStamp:ALL:CH<x> command.
.math: The HORizontal:FASTframe:TIMEStamp:ALL:MATH<x> command.
.ref: The HORizontal:FASTframe:TIMEStamp:ALL:REF<x> command.
.d: The HORizontal:FASTframe:TIMEStamp:ALL:D<x> command.

between `property` ¶

between: HorizontalFastframeTimestampBetween

Return the HORizontal:FASTframe:TIMEStamp:BETWeen command tree.

Usage

Using the .query() method will send the HORizontal:FASTframe:TIMEStamp:BETWeen? query.
Using the .verify(value) method will send the HORizontal:FASTframe:TIMEStamp:BETWeen? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.ch: The HORizontal:FASTframe:TIMEStamp:BETWeen:CH<x> command.
.math: The HORizontal:FASTframe:TIMEStamp:BETWeen:MATH<x> command.
.ref: The HORizontal:FASTframe:TIMEStamp:BETWeen:REF<x> command.
.d: The HORizontal:FASTframe:TIMEStamp:BETWeen:D<x> command.

delta `property` ¶

delta: HorizontalFastframeTimestampDelta

Return the HORizontal:FASTframe:TIMEStamp:DELTa command tree.

Usage

Using the .query() method will send the HORizontal:FASTframe:TIMEStamp:DELTa? query.
Using the .verify(value) method will send the HORizontal:FASTframe:TIMEStamp:DELTa? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.ch: The HORizontal:FASTframe:TIMEStamp:DELTa:CH<x> command.
.math: The HORizontal:FASTframe:TIMEStamp:DELTa:MATH<x> command.
.ref: The HORizontal:FASTframe:TIMEStamp:DELTa:REF<x> command.
.d: The HORizontal:FASTframe:TIMEStamp:DELTa:D<x> command.

frame `property` ¶

frame: HorizontalFastframeTimestampFrame

Return the HORizontal:FASTframe:TIMEStamp:FRAMe command tree.

Usage

Using the .query() method will send the HORizontal:FASTframe:TIMEStamp:FRAMe? query.
Using the .verify(value) method will send the HORizontal:FASTframe:TIMEStamp:FRAMe? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.ch: The HORizontal:FASTframe:TIMEStamp:FRAMe:CH<x> command.
.math: The HORizontal:FASTframe:TIMEStamp:FRAMe:MATH<x> command.
.ref: The HORizontal:FASTframe:TIMEStamp:FRAMe:REF<x> command.
.d: The HORizontal:FASTframe:TIMEStamp:FRAMe:D<x> command.

ref `property` ¶

ref: HorizontalFastframeTimestampRef

Return the HORizontal:FASTframe:TIMEStamp:REF command.

Description

This query-only command returns the absolute trigger date and time for FastFrame reference. The format of the output is as follows: DD MON YYYY HH:MM:SS.xxx xxx xxx xxx DD MON YYYY is day, month, and year HH:MM:SS is hours, minutes, and seconds .xxx xxx xxx xxx is fractions of a second to picoseconds

Usage

Using the .query() method will send the HORizontal:FASTframe:TIMEStamp:REF? query.
Using the .verify(value) method will send the HORizontal:FASTframe:TIMEStamp:REF? query and raise an AssertionError if the returned value does not match value.

SCPI Syntax

- HORizontal:FASTframe:TIMEStamp:REF?

selected `property` ¶

selected: HorizontalFastframeTimestampSelected

Return the HORizontal:FASTframe:TIMEStamp:SELECTED command tree.

Usage

Using the .query() method will send the HORizontal:FASTframe:TIMEStamp:SELECTED? query.
Using the .verify(value) method will send the HORizontal:FASTframe:TIMEStamp:SELECTED? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.ch: The HORizontal:FASTframe:TIMEStamp:SELECTED:CH<x> command.
.math: The HORizontal:FASTframe:TIMEStamp:SELECTED:MATH<x> command.
.ref: The HORizontal:FASTframe:TIMEStamp:SELECTED:REF<x> command.
.d: The HORizontal:FASTframe:TIMEStamp:SELECTED:D<x> command.

HorizontalFastframeTimestampAll ¶

Bases: SCPICmdRead

The HORizontal:FASTframe:TIMEStamp:ALL command tree.

Usage

Using the .query() method will send the HORizontal:FASTframe:TIMEStamp:ALL? query.
Using the .verify(value) method will send the HORizontal:FASTframe:TIMEStamp:ALL? query and raise an AssertionError if the returned value does not match value.

Properties

.ch: The HORizontal:FASTframe:TIMEStamp:ALL:CH<x> command.
.math: The HORizontal:FASTframe:TIMEStamp:ALL:MATH<x> command.
.ref: The HORizontal:FASTframe:TIMEStamp:ALL:REF<x> command.
.d: The HORizontal:FASTframe:TIMEStamp:ALL:D<x> command.

ch `property` ¶

ch: dict[int, HorizontalFastframeTimestampAllChannel]

Return the HORizontal:FASTframe:TIMEStamp:ALL:CH<x> command.

Description

This query-only command returns the frame number and time stamp for each frame between requested frames, inclusive, within the specified waveform. Argument order is unimportant. Valid waveforms include CH, MATH and REF. The x variable can be expressed as an integer ranging from 1 through 4. The format of the output is as follows: DD MON YYYY HH:MM:SS.xxx xxx xxx xxx DD MON YYYY is day, month, and year HH:MM:SS is hours, minutes, and seconds .xxx xxx xxx xxx is fractions of a second to picoseconds

Usage

Using the .query(argument) method will send the HORizontal:FASTframe:TIMEStamp:ALL:CH<x>? argument query.
Using the .verify(argument, value) method will send the HORizontal:FASTframe:TIMEStamp:ALL:CH<x>? argument query and raise an AssertionError if the returned value does not match value.

SCPI Syntax

- HORizontal:FASTframe:TIMEStamp:ALL:CH<x>? <NR1>, <NR1>

d `property` ¶

d: dict[int, HorizontalFastframeTimestampAllDigitalBit]

Return the HORizontal:FASTframe:TIMEStamp:ALL:D<x> command.

Description

This query-only command returns the frame number and time stamp for each frame between requested frames, inclusive, within the specified waveform. Argument order is unimportant. Valid waveforms include CH, MATH and REF. The x variable can be expressed as an integer ranging from 1 through 4. The format of the output is as follows: DD MON YYYY HH:MM:SS.xxx xxx xxx xxx DD MON YYYY is day, month, and year HH:MM:SS is hours, minutes, and seconds .xxx xxx xxx xxx is fractions of a second to picoseconds

Usage

Using the .query(argument) method will send the HORizontal:FASTframe:TIMEStamp:ALL:D<x>? argument query.
Using the .verify(argument, value) method will send the HORizontal:FASTframe:TIMEStamp:ALL:D<x>? argument query and raise an AssertionError if the returned value does not match value.

SCPI Syntax

- HORizontal:FASTframe:TIMEStamp:ALL:D<x>? <NR1>, <NR1>

math `property` ¶

math: dict[int, HorizontalFastframeTimestampAllMathItem]

Return the HORizontal:FASTframe:TIMEStamp:ALL:MATH<x> command.

Description

This query-only command returns the frame number and time stamp for each frame between requested frames, inclusive, within the specified waveform. Argument order is unimportant. Valid waveforms include CH, MATH and REF. The x variable can be expressed as an integer ranging from 1 through 4. The format of the output is as follows: DD MON YYYY HH:MM:SS.xxx xxx xxx xxx DD MON YYYY is day, month, and year HH:MM:SS is hours, minutes, and seconds .xxx xxx xxx xxx is fractions of a second to picoseconds

Usage

Using the .query(argument) method will send the HORizontal:FASTframe:TIMEStamp:ALL:MATH<x>? argument query.
Using the .verify(argument, value) method will send the HORizontal:FASTframe:TIMEStamp:ALL:MATH<x>? argument query and raise an AssertionError if the returned value does not match value.

SCPI Syntax

- HORizontal:FASTframe:TIMEStamp:ALL:MATH<x>? <NR1>, <NR1>

ref `property` ¶

ref: dict[int, HorizontalFastframeTimestampAllRefItem]

Return the HORizontal:FASTframe:TIMEStamp:ALL:REF<x> command.

Description

This query-only command returns the frame number and time stamp for each frame between requested frames, inclusive, within the specified waveform. Argument order is unimportant. Valid waveforms include CH, MATH and REF. The x variable can be expressed as an integer ranging from 1 through 4. The format of the output is as follows: DD MON YYYY HH:MM:SS.xxx xxx xxx xxx DD MON YYYY is day, month, and year HH:MM:SS is hours, minutes, and seconds .xxx xxx xxx xxx is fractions of a second to picoseconds

Usage

Using the .query(argument) method will send the HORizontal:FASTframe:TIMEStamp:ALL:REF<x>? argument query.
Using the .verify(argument, value) method will send the HORizontal:FASTframe:TIMEStamp:ALL:REF<x>? argument query and raise an AssertionError if the returned value does not match value.

SCPI Syntax

- HORizontal:FASTframe:TIMEStamp:ALL:REF<x>? <NR1>, <NR1>

HorizontalFastframeTimestampAllChannel ¶

Bases: ValidatedChannel, SCPICmdReadWithArguments

The HORizontal:FASTframe:TIMEStamp:ALL:CH<x> command.

Description

This query-only command returns the frame number and time stamp for each frame between requested frames, inclusive, within the specified waveform. Argument order is unimportant. Valid waveforms include CH, MATH and REF. The x variable can be expressed as an integer ranging from 1 through 4. The format of the output is as follows: DD MON YYYY HH:MM:SS.xxx xxx xxx xxx DD MON YYYY is day, month, and year HH:MM:SS is hours, minutes, and seconds .xxx xxx xxx xxx is fractions of a second to picoseconds

Usage

Using the .query(argument) method will send the HORizontal:FASTframe:TIMEStamp:ALL:CH<x>? argument query.
Using the .verify(argument, value) method will send the HORizontal:FASTframe:TIMEStamp:ALL:CH<x>? argument query and raise an AssertionError if the returned value does not match value.

SCPI Syntax

- HORizontal:FASTframe:TIMEStamp:ALL:CH<x>? <NR1>, <NR1>

HorizontalFastframeTimestampAllDigitalBit ¶

Bases: ValidatedDigitalBit, SCPICmdReadWithArguments

The HORizontal:FASTframe:TIMEStamp:ALL:D<x> command.

Description

This query-only command returns the frame number and time stamp for each frame between requested frames, inclusive, within the specified waveform. Argument order is unimportant. Valid waveforms include CH, MATH and REF. The x variable can be expressed as an integer ranging from 1 through 4. The format of the output is as follows: DD MON YYYY HH:MM:SS.xxx xxx xxx xxx DD MON YYYY is day, month, and year HH:MM:SS is hours, minutes, and seconds .xxx xxx xxx xxx is fractions of a second to picoseconds

Usage

Using the .query(argument) method will send the HORizontal:FASTframe:TIMEStamp:ALL:D<x>? argument query.
Using the .verify(argument, value) method will send the HORizontal:FASTframe:TIMEStamp:ALL:D<x>? argument query and raise an AssertionError if the returned value does not match value.

SCPI Syntax

- HORizontal:FASTframe:TIMEStamp:ALL:D<x>? <NR1>, <NR1>

HorizontalFastframeTimestampAllMathItem ¶

Bases: ValidatedDynamicNumberCmd, SCPICmdReadWithArguments

The HORizontal:FASTframe:TIMEStamp:ALL:MATH<x> command.

Description

This query-only command returns the frame number and time stamp for each frame between requested frames, inclusive, within the specified waveform. Argument order is unimportant. Valid waveforms include CH, MATH and REF. The x variable can be expressed as an integer ranging from 1 through 4. The format of the output is as follows: DD MON YYYY HH:MM:SS.xxx xxx xxx xxx DD MON YYYY is day, month, and year HH:MM:SS is hours, minutes, and seconds .xxx xxx xxx xxx is fractions of a second to picoseconds

Usage

Using the .query(argument) method will send the HORizontal:FASTframe:TIMEStamp:ALL:MATH<x>? argument query.
Using the .verify(argument, value) method will send the HORizontal:FASTframe:TIMEStamp:ALL:MATH<x>? argument query and raise an AssertionError if the returned value does not match value.

SCPI Syntax

- HORizontal:FASTframe:TIMEStamp:ALL:MATH<x>? <NR1>, <NR1>

HorizontalFastframeTimestampAllRefItem ¶

Bases: ValidatedDynamicNumberCmd, SCPICmdReadWithArguments

The HORizontal:FASTframe:TIMEStamp:ALL:REF<x> command.

Description

This query-only command returns the frame number and time stamp for each frame between requested frames, inclusive, within the specified waveform. Argument order is unimportant. Valid waveforms include CH, MATH and REF. The x variable can be expressed as an integer ranging from 1 through 4. The format of the output is as follows: DD MON YYYY HH:MM:SS.xxx xxx xxx xxx DD MON YYYY is day, month, and year HH:MM:SS is hours, minutes, and seconds .xxx xxx xxx xxx is fractions of a second to picoseconds

Usage

Using the .query(argument) method will send the HORizontal:FASTframe:TIMEStamp:ALL:REF<x>? argument query.
Using the .verify(argument, value) method will send the HORizontal:FASTframe:TIMEStamp:ALL:REF<x>? argument query and raise an AssertionError if the returned value does not match value.

SCPI Syntax

- HORizontal:FASTframe:TIMEStamp:ALL:REF<x>? <NR1>, <NR1>

HorizontalFastframeTimestampBetween ¶

Bases: SCPICmdRead

The HORizontal:FASTframe:TIMEStamp:BETWeen command tree.

Usage

Using the .query() method will send the HORizontal:FASTframe:TIMEStamp:BETWeen? query.
Using the .verify(value) method will send the HORizontal:FASTframe:TIMEStamp:BETWeen? query and raise an AssertionError if the returned value does not match value.

Properties

.ch: The HORizontal:FASTframe:TIMEStamp:BETWeen:CH<x> command.
.math: The HORizontal:FASTframe:TIMEStamp:BETWeen:MATH<x> command.
.ref: The HORizontal:FASTframe:TIMEStamp:BETWeen:REF<x> command.
.d: The HORizontal:FASTframe:TIMEStamp:BETWeen:D<x> command.

ch `property` ¶

ch: dict[int, HorizontalFastframeTimestampBetweenChannel]

Return the HORizontal:FASTframe:TIMEStamp:BETWeen:CH<x> command.

Description

This query-only command returns the relative trigger for the delta time between the specified frames, within the specified waveform. Valid waveforms include CH, MATH and REF. The x variable can be expressed as an integer ranging from 1 through 4. The format of the delta time output is as follows: HH:MM:SS.xxx xxx xxx xxx HH:MM:SS is hours, minutes, and seconds .xxx xxx xxx xxx is fractions of a second to picoseconds

Usage

Using the .query(argument) method will send the HORizontal:FASTframe:TIMEStamp:BETWeen:CH<x>? argument query.
Using the .verify(argument, value) method will send the HORizontal:FASTframe:TIMEStamp:BETWeen:CH<x>? argument query and raise an AssertionError if the returned value does not match value.

SCPI Syntax

- HORizontal:FASTframe:TIMEStamp:BETWeen:CH<x>? <NR1>, <NR1>

d `property` ¶

d: dict[int, HorizontalFastframeTimestampBetweenDigitalBit]

Return the HORizontal:FASTframe:TIMEStamp:BETWeen:D<x> command.

Description

This query-only command returns the relative trigger for the delta time between the specified frames, within the specified waveform. Valid waveforms include CH, MATH and REF. The x variable can be expressed as an integer ranging from 1 through 4. The format of the delta time output is as follows: HH:MM:SS.xxx xxx xxx xxx HH:MM:SS is hours, minutes, and seconds .xxx xxx xxx xxx is fractions of a second to picoseconds

Usage

Using the .query(argument) method will send the HORizontal:FASTframe:TIMEStamp:BETWeen:D<x>? argument query.
Using the .verify(argument, value) method will send the HORizontal:FASTframe:TIMEStamp:BETWeen:D<x>? argument query and raise an AssertionError if the returned value does not match value.

SCPI Syntax

- HORizontal:FASTframe:TIMEStamp:BETWeen:D<x>? <NR1>, <NR1>

math `property` ¶

math: dict[int, HorizontalFastframeTimestampBetweenMathItem]

Return the HORizontal:FASTframe:TIMEStamp:BETWeen:MATH<x> command.

Description

This query-only command returns the relative trigger for the delta time between the specified frames, within the specified waveform. Valid waveforms include CH, MATH and REF. The x variable can be expressed as an integer ranging from 1 through 4. The format of the delta time output is as follows: HH:MM:SS.xxx xxx xxx xxx HH:MM:SS is hours, minutes, and seconds .xxx xxx xxx xxx is fractions of a second to picoseconds

Usage

Using the .query(argument) method will send the HORizontal:FASTframe:TIMEStamp:BETWeen:MATH<x>? argument query.
Using the .verify(argument, value) method will send the HORizontal:FASTframe:TIMEStamp:BETWeen:MATH<x>? argument query and raise an AssertionError if the returned value does not match value.

SCPI Syntax

- HORizontal:FASTframe:TIMEStamp:BETWeen:MATH<x>? <NR1>, <NR1>

ref `property` ¶

ref: dict[int, HorizontalFastframeTimestampBetweenRefItem]

Return the HORizontal:FASTframe:TIMEStamp:BETWeen:REF<x> command.

Description

This query-only command returns the relative trigger for the delta time between the specified frames, within the specified waveform. Valid waveforms include CH, MATH and REF. The x variable can be expressed as an integer ranging from 1 through 4. The format of the delta time output is as follows: HH:MM:SS.xxx xxx xxx xxx HH:MM:SS is hours, minutes, and seconds .xxx xxx xxx xxx is fractions of a second to picoseconds

Usage

Using the .query(argument) method will send the HORizontal:FASTframe:TIMEStamp:BETWeen:REF<x>? argument query.
Using the .verify(argument, value) method will send the HORizontal:FASTframe:TIMEStamp:BETWeen:REF<x>? argument query and raise an AssertionError if the returned value does not match value.

SCPI Syntax

- HORizontal:FASTframe:TIMEStamp:BETWeen:REF<x>? <NR1>, <NR1>

HorizontalFastframeTimestampBetweenChannel ¶

Bases: ValidatedChannel, SCPICmdReadWithArguments

The HORizontal:FASTframe:TIMEStamp:BETWeen:CH<x> command.

Description

This query-only command returns the relative trigger for the delta time between the specified frames, within the specified waveform. Valid waveforms include CH, MATH and REF. The x variable can be expressed as an integer ranging from 1 through 4. The format of the delta time output is as follows: HH:MM:SS.xxx xxx xxx xxx HH:MM:SS is hours, minutes, and seconds .xxx xxx xxx xxx is fractions of a second to picoseconds

Usage

Using the .query(argument) method will send the HORizontal:FASTframe:TIMEStamp:BETWeen:CH<x>? argument query.
Using the .verify(argument, value) method will send the HORizontal:FASTframe:TIMEStamp:BETWeen:CH<x>? argument query and raise an AssertionError if the returned value does not match value.

SCPI Syntax

- HORizontal:FASTframe:TIMEStamp:BETWeen:CH<x>? <NR1>, <NR1>

HorizontalFastframeTimestampBetweenDigitalBit ¶

Bases: ValidatedDigitalBit, SCPICmdReadWithArguments

The HORizontal:FASTframe:TIMEStamp:BETWeen:D<x> command.

Description

This query-only command returns the relative trigger for the delta time between the specified frames, within the specified waveform. Valid waveforms include CH, MATH and REF. The x variable can be expressed as an integer ranging from 1 through 4. The format of the delta time output is as follows: HH:MM:SS.xxx xxx xxx xxx HH:MM:SS is hours, minutes, and seconds .xxx xxx xxx xxx is fractions of a second to picoseconds

Usage

Using the .query(argument) method will send the HORizontal:FASTframe:TIMEStamp:BETWeen:D<x>? argument query.
Using the .verify(argument, value) method will send the HORizontal:FASTframe:TIMEStamp:BETWeen:D<x>? argument query and raise an AssertionError if the returned value does not match value.

SCPI Syntax

- HORizontal:FASTframe:TIMEStamp:BETWeen:D<x>? <NR1>, <NR1>

HorizontalFastframeTimestampBetweenMathItem ¶

Bases: ValidatedDynamicNumberCmd, SCPICmdReadWithArguments

The HORizontal:FASTframe:TIMEStamp:BETWeen:MATH<x> command.

Description

This query-only command returns the relative trigger for the delta time between the specified frames, within the specified waveform. Valid waveforms include CH, MATH and REF. The x variable can be expressed as an integer ranging from 1 through 4. The format of the delta time output is as follows: HH:MM:SS.xxx xxx xxx xxx HH:MM:SS is hours, minutes, and seconds .xxx xxx xxx xxx is fractions of a second to picoseconds

Usage

Using the .query(argument) method will send the HORizontal:FASTframe:TIMEStamp:BETWeen:MATH<x>? argument query.
Using the .verify(argument, value) method will send the HORizontal:FASTframe:TIMEStamp:BETWeen:MATH<x>? argument query and raise an AssertionError if the returned value does not match value.

SCPI Syntax

- HORizontal:FASTframe:TIMEStamp:BETWeen:MATH<x>? <NR1>, <NR1>

HorizontalFastframeTimestampBetweenRefItem ¶

Bases: ValidatedDynamicNumberCmd, SCPICmdReadWithArguments

The HORizontal:FASTframe:TIMEStamp:BETWeen:REF<x> command.

Description

This query-only command returns the relative trigger for the delta time between the specified frames, within the specified waveform. Valid waveforms include CH, MATH and REF. The x variable can be expressed as an integer ranging from 1 through 4. The format of the delta time output is as follows: HH:MM:SS.xxx xxx xxx xxx HH:MM:SS is hours, minutes, and seconds .xxx xxx xxx xxx is fractions of a second to picoseconds

Usage

Using the .query(argument) method will send the HORizontal:FASTframe:TIMEStamp:BETWeen:REF<x>? argument query.
Using the .verify(argument, value) method will send the HORizontal:FASTframe:TIMEStamp:BETWeen:REF<x>? argument query and raise an AssertionError if the returned value does not match value.

SCPI Syntax

- HORizontal:FASTframe:TIMEStamp:BETWeen:REF<x>? <NR1>, <NR1>

HorizontalFastframeTimestampDelta ¶

Bases: SCPICmdRead

The HORizontal:FASTframe:TIMEStamp:DELTa command tree.

Usage

Using the .query() method will send the HORizontal:FASTframe:TIMEStamp:DELTa? query.
Using the .verify(value) method will send the HORizontal:FASTframe:TIMEStamp:DELTa? query and raise an AssertionError if the returned value does not match value.

Properties

.ch: The HORizontal:FASTframe:TIMEStamp:DELTa:CH<x> command.
.math: The HORizontal:FASTframe:TIMEStamp:DELTa:MATH<x> command.
.ref: The HORizontal:FASTframe:TIMEStamp:DELTa:REF<x> command.
.d: The HORizontal:FASTframe:TIMEStamp:DELTa:D<x> command.

ch `property` ¶

ch: dict[int, HorizontalFastframeTimestampDeltaChannel]

Return the HORizontal:FASTframe:TIMEStamp:DELTa:CH<x> command.

Description

This query-only command returns the relative time between the triggers of the FastFrame Selected and the FastFrame Reference, within the specified waveform. Valid waveforms include CH, MATH, and REF. The x variable can be expressed as an integer ranging from 1 through 4. The format of the output is as follows: HH:MM:SS.xxx xxx xxx xxx HH:MM:SS is hours, minutes, and seconds .xxx xxx xxx xxx is fractions of a second to picoseconds

Usage

Using the .query() method will send the HORizontal:FASTframe:TIMEStamp:DELTa:CH<x>? query.
Using the .verify(value) method will send the HORizontal:FASTframe:TIMEStamp:DELTa:CH<x>? query and raise an AssertionError if the returned value does not match value.

SCPI Syntax

- HORizontal:FASTframe:TIMEStamp:DELTa:CH<x>?

d `property` ¶

d: dict[int, HorizontalFastframeTimestampDeltaDigitalBit]

Return the HORizontal:FASTframe:TIMEStamp:DELTa:D<x> command.

Description

This query-only command returns the relative time between the triggers of the FastFrame Selected and the FastFrame Reference, within the specified waveform. Valid waveforms include CH, MATH, and REF. The x variable can be expressed as an integer ranging from 1 through 4. The format of the output is as follows: HH:MM:SS.xxx xxx xxx xxx HH:MM:SS is hours, minutes, and seconds .xxx xxx xxx xxx is fractions of a second to picoseconds

Usage

Using the .query() method will send the HORizontal:FASTframe:TIMEStamp:DELTa:D<x>? query.
Using the .verify(value) method will send the HORizontal:FASTframe:TIMEStamp:DELTa:D<x>? query and raise an AssertionError if the returned value does not match value.

SCPI Syntax

- HORizontal:FASTframe:TIMEStamp:DELTa:D<x>?

math `property` ¶

math: dict[int, HorizontalFastframeTimestampDeltaMathItem]

Return the HORizontal:FASTframe:TIMEStamp:DELTa:MATH<x> command.

Description

This query-only command returns the relative time between the triggers of the FastFrame Selected and the FastFrame Reference, within the specified waveform. Valid waveforms include CH, MATH, and REF. The x variable can be expressed as an integer ranging from 1 through 4. The format of the output is as follows: HH:MM:SS.xxx xxx xxx xxx HH:MM:SS is hours, minutes, and seconds .xxx xxx xxx xxx is fractions of a second to picoseconds

Usage

Using the .query() method will send the HORizontal:FASTframe:TIMEStamp:DELTa:MATH<x>? query.
Using the .verify(value) method will send the HORizontal:FASTframe:TIMEStamp:DELTa:MATH<x>? query and raise an AssertionError if the returned value does not match value.

SCPI Syntax

- HORizontal:FASTframe:TIMEStamp:DELTa:MATH<x>?

ref `property` ¶

ref: dict[int, HorizontalFastframeTimestampDeltaRefItem]

Return the HORizontal:FASTframe:TIMEStamp:DELTa:REF<x> command.

Description

This query-only command returns the relative time between the triggers of the FastFrame Selected and the FastFrame Reference, within the specified waveform. Valid waveforms include CH, MATH, and REF. The x variable can be expressed as an integer ranging from 1 through 4. The format of the output is as follows: HH:MM:SS.xxx xxx xxx xxx HH:MM:SS is hours, minutes, and seconds .xxx xxx xxx xxx is fractions of a second to picoseconds

Usage

Using the .query() method will send the HORizontal:FASTframe:TIMEStamp:DELTa:REF<x>? query.
Using the .verify(value) method will send the HORizontal:FASTframe:TIMEStamp:DELTa:REF<x>? query and raise an AssertionError if the returned value does not match value.

SCPI Syntax

- HORizontal:FASTframe:TIMEStamp:DELTa:REF<x>?

HorizontalFastframeTimestampDeltaChannel ¶

Bases: ValidatedChannel, SCPICmdRead

The HORizontal:FASTframe:TIMEStamp:DELTa:CH<x> command.

Description

This query-only command returns the relative time between the triggers of the FastFrame Selected and the FastFrame Reference, within the specified waveform. Valid waveforms include CH, MATH, and REF. The x variable can be expressed as an integer ranging from 1 through 4. The format of the output is as follows: HH:MM:SS.xxx xxx xxx xxx HH:MM:SS is hours, minutes, and seconds .xxx xxx xxx xxx is fractions of a second to picoseconds

Usage

Using the .query() method will send the HORizontal:FASTframe:TIMEStamp:DELTa:CH<x>? query.
Using the .verify(value) method will send the HORizontal:FASTframe:TIMEStamp:DELTa:CH<x>? query and raise an AssertionError if the returned value does not match value.

SCPI Syntax

- HORizontal:FASTframe:TIMEStamp:DELTa:CH<x>?

HorizontalFastframeTimestampDeltaDigitalBit ¶

Bases: ValidatedDigitalBit, SCPICmdRead

The HORizontal:FASTframe:TIMEStamp:DELTa:D<x> command.

Description

This query-only command returns the relative time between the triggers of the FastFrame Selected and the FastFrame Reference, within the specified waveform. Valid waveforms include CH, MATH, and REF. The x variable can be expressed as an integer ranging from 1 through 4. The format of the output is as follows: HH:MM:SS.xxx xxx xxx xxx HH:MM:SS is hours, minutes, and seconds .xxx xxx xxx xxx is fractions of a second to picoseconds

Usage

Using the .query() method will send the HORizontal:FASTframe:TIMEStamp:DELTa:D<x>? query.
Using the .verify(value) method will send the HORizontal:FASTframe:TIMEStamp:DELTa:D<x>? query and raise an AssertionError if the returned value does not match value.

SCPI Syntax

- HORizontal:FASTframe:TIMEStamp:DELTa:D<x>?

HorizontalFastframeTimestampDeltaMathItem ¶

Bases: ValidatedDynamicNumberCmd, SCPICmdRead

The HORizontal:FASTframe:TIMEStamp:DELTa:MATH<x> command.

Description

This query-only command returns the relative time between the triggers of the FastFrame Selected and the FastFrame Reference, within the specified waveform. Valid waveforms include CH, MATH, and REF. The x variable can be expressed as an integer ranging from 1 through 4. The format of the output is as follows: HH:MM:SS.xxx xxx xxx xxx HH:MM:SS is hours, minutes, and seconds .xxx xxx xxx xxx is fractions of a second to picoseconds

Usage

Using the .query() method will send the HORizontal:FASTframe:TIMEStamp:DELTa:MATH<x>? query.
Using the .verify(value) method will send the HORizontal:FASTframe:TIMEStamp:DELTa:MATH<x>? query and raise an AssertionError if the returned value does not match value.

SCPI Syntax

- HORizontal:FASTframe:TIMEStamp:DELTa:MATH<x>?

HorizontalFastframeTimestampDeltaRefItem ¶

Bases: ValidatedDynamicNumberCmd, SCPICmdRead

The HORizontal:FASTframe:TIMEStamp:DELTa:REF<x> command.

Description

This query-only command returns the relative time between the triggers of the FastFrame Selected and the FastFrame Reference, within the specified waveform. Valid waveforms include CH, MATH, and REF. The x variable can be expressed as an integer ranging from 1 through 4. The format of the output is as follows: HH:MM:SS.xxx xxx xxx xxx HH:MM:SS is hours, minutes, and seconds .xxx xxx xxx xxx is fractions of a second to picoseconds

Usage

Using the .query() method will send the HORizontal:FASTframe:TIMEStamp:DELTa:REF<x>? query.
Using the .verify(value) method will send the HORizontal:FASTframe:TIMEStamp:DELTa:REF<x>? query and raise an AssertionError if the returned value does not match value.

SCPI Syntax

- HORizontal:FASTframe:TIMEStamp:DELTa:REF<x>?

HorizontalFastframeTimestampFrame ¶

Bases: SCPICmdRead

The HORizontal:FASTframe:TIMEStamp:FRAMe command tree.

Usage

Using the .query() method will send the HORizontal:FASTframe:TIMEStamp:FRAMe? query.
Using the .verify(value) method will send the HORizontal:FASTframe:TIMEStamp:FRAMe? query and raise an AssertionError if the returned value does not match value.

Properties

.ch: The HORizontal:FASTframe:TIMEStamp:FRAMe:CH<x> command.
.math: The HORizontal:FASTframe:TIMEStamp:FRAMe:MATH<x> command.
.ref: The HORizontal:FASTframe:TIMEStamp:FRAMe:REF<x> command.
.d: The HORizontal:FASTframe:TIMEStamp:FRAMe:D<x> command.

ch `property` ¶

ch: dict[int, HorizontalFastframeTimestampFrameChannel]

Return the HORizontal:FASTframe:TIMEStamp:FRAMe:CH<x> command.

Description

This query-only command returns the absolute trigger date and time for the specified frame and waveform. Valid waveforms include CH, MATH and REF. The x variable can be expressed as an integer ranging from 1 through 4. The format of the output is as follows: DD MON YYYY HH:MM:SS.xxx xxx xxx xxx DD MON YYYY is day, month, and year HH:MM:SS is hours, minutes, and seconds .xxx xxx xxx xxx is fractions of a second to picoseconds

Usage

Using the .query(argument) method will send the HORizontal:FASTframe:TIMEStamp:FRAMe:CH<x>? argument query.
Using the .verify(argument, value) method will send the HORizontal:FASTframe:TIMEStamp:FRAMe:CH<x>? argument query and raise an AssertionError if the returned value does not match value.

SCPI Syntax

- HORizontal:FASTframe:TIMEStamp:FRAMe:CH<x>? <NR1>

d `property` ¶

d: dict[int, HorizontalFastframeTimestampFrameDigitalBit]

Return the HORizontal:FASTframe:TIMEStamp:FRAMe:D<x> command.

Description

This query-only command returns the absolute trigger date and time for the specified frame and waveform. Valid waveforms include CH, MATH and REF. The x variable can be expressed as an integer ranging from 1 through 4. The format of the output is as follows: DD MON YYYY HH:MM:SS.xxx xxx xxx xxx DD MON YYYY is day, month, and year HH:MM:SS is hours, minutes, and seconds .xxx xxx xxx xxx is fractions of a second to picoseconds

Usage

Using the .query(argument) method will send the HORizontal:FASTframe:TIMEStamp:FRAMe:D<x>? argument query.
Using the .verify(argument, value) method will send the HORizontal:FASTframe:TIMEStamp:FRAMe:D<x>? argument query and raise an AssertionError if the returned value does not match value.

SCPI Syntax

- HORizontal:FASTframe:TIMEStamp:FRAMe:D<x>? <NR1>

math `property` ¶

math: dict[int, HorizontalFastframeTimestampFrameMathItem]

Return the HORizontal:FASTframe:TIMEStamp:FRAMe:MATH<x> command.

Description

This query-only command returns the absolute trigger date and time for the specified frame and waveform. Valid waveforms include CH, MATH and REF. The x variable can be expressed as an integer ranging from 1 through 4. The format of the output is as follows: DD MON YYYY HH:MM:SS.xxx xxx xxx xxx DD MON YYYY is day, month, and year HH:MM:SS is hours, minutes, and seconds .xxx xxx xxx xxx is fractions of a second to picoseconds

Usage

Using the .query(argument) method will send the HORizontal:FASTframe:TIMEStamp:FRAMe:MATH<x>? argument query.
Using the .verify(argument, value) method will send the HORizontal:FASTframe:TIMEStamp:FRAMe:MATH<x>? argument query and raise an AssertionError if the returned value does not match value.

SCPI Syntax

- HORizontal:FASTframe:TIMEStamp:FRAMe:MATH<x>? <NR1>

ref `property` ¶

ref: dict[int, HorizontalFastframeTimestampFrameRefItem]

Return the HORizontal:FASTframe:TIMEStamp:FRAMe:REF<x> command.

Description

This query-only command returns the absolute trigger date and time for the specified frame and waveform. Valid waveforms include CH, MATH and REF. The x variable can be expressed as an integer ranging from 1 through 4. The format of the output is as follows: DD MON YYYY HH:MM:SS.xxx xxx xxx xxx DD MON YYYY is day, month, and year HH:MM:SS is hours, minutes, and seconds .xxx xxx xxx xxx is fractions of a second to picoseconds

Usage

Using the .query(argument) method will send the HORizontal:FASTframe:TIMEStamp:FRAMe:REF<x>? argument query.
Using the .verify(argument, value) method will send the HORizontal:FASTframe:TIMEStamp:FRAMe:REF<x>? argument query and raise an AssertionError if the returned value does not match value.

SCPI Syntax

- HORizontal:FASTframe:TIMEStamp:FRAMe:REF<x>? <NR1>

HorizontalFastframeTimestampFrameChannel ¶

Bases: ValidatedChannel, SCPICmdReadWithArguments

The HORizontal:FASTframe:TIMEStamp:FRAMe:CH<x> command.

Description

This query-only command returns the absolute trigger date and time for the specified frame and waveform. Valid waveforms include CH, MATH and REF. The x variable can be expressed as an integer ranging from 1 through 4. The format of the output is as follows: DD MON YYYY HH:MM:SS.xxx xxx xxx xxx DD MON YYYY is day, month, and year HH:MM:SS is hours, minutes, and seconds .xxx xxx xxx xxx is fractions of a second to picoseconds

Usage

Using the .query(argument) method will send the HORizontal:FASTframe:TIMEStamp:FRAMe:CH<x>? argument query.
Using the .verify(argument, value) method will send the HORizontal:FASTframe:TIMEStamp:FRAMe:CH<x>? argument query and raise an AssertionError if the returned value does not match value.

SCPI Syntax

- HORizontal:FASTframe:TIMEStamp:FRAMe:CH<x>? <NR1>

HorizontalFastframeTimestampFrameDigitalBit ¶

Bases: ValidatedDigitalBit, SCPICmdReadWithArguments

The HORizontal:FASTframe:TIMEStamp:FRAMe:D<x> command.

Description

This query-only command returns the absolute trigger date and time for the specified frame and waveform. Valid waveforms include CH, MATH and REF. The x variable can be expressed as an integer ranging from 1 through 4. The format of the output is as follows: DD MON YYYY HH:MM:SS.xxx xxx xxx xxx DD MON YYYY is day, month, and year HH:MM:SS is hours, minutes, and seconds .xxx xxx xxx xxx is fractions of a second to picoseconds

Usage

Using the .query(argument) method will send the HORizontal:FASTframe:TIMEStamp:FRAMe:D<x>? argument query.
Using the .verify(argument, value) method will send the HORizontal:FASTframe:TIMEStamp:FRAMe:D<x>? argument query and raise an AssertionError if the returned value does not match value.

SCPI Syntax

- HORizontal:FASTframe:TIMEStamp:FRAMe:D<x>? <NR1>

HorizontalFastframeTimestampFrameMathItem ¶

Bases: ValidatedDynamicNumberCmd, SCPICmdReadWithArguments

The HORizontal:FASTframe:TIMEStamp:FRAMe:MATH<x> command.

Description

This query-only command returns the absolute trigger date and time for the specified frame and waveform. Valid waveforms include CH, MATH and REF. The x variable can be expressed as an integer ranging from 1 through 4. The format of the output is as follows: DD MON YYYY HH:MM:SS.xxx xxx xxx xxx DD MON YYYY is day, month, and year HH:MM:SS is hours, minutes, and seconds .xxx xxx xxx xxx is fractions of a second to picoseconds

Usage

Using the .query(argument) method will send the HORizontal:FASTframe:TIMEStamp:FRAMe:MATH<x>? argument query.
Using the .verify(argument, value) method will send the HORizontal:FASTframe:TIMEStamp:FRAMe:MATH<x>? argument query and raise an AssertionError if the returned value does not match value.

SCPI Syntax

- HORizontal:FASTframe:TIMEStamp:FRAMe:MATH<x>? <NR1>

HorizontalFastframeTimestampFrameRefItem ¶

Bases: ValidatedDynamicNumberCmd, SCPICmdReadWithArguments

The HORizontal:FASTframe:TIMEStamp:FRAMe:REF<x> command.

Description

This query-only command returns the absolute trigger date and time for the specified frame and waveform. Valid waveforms include CH, MATH and REF. The x variable can be expressed as an integer ranging from 1 through 4. The format of the output is as follows: DD MON YYYY HH:MM:SS.xxx xxx xxx xxx DD MON YYYY is day, month, and year HH:MM:SS is hours, minutes, and seconds .xxx xxx xxx xxx is fractions of a second to picoseconds

Usage

Using the .query(argument) method will send the HORizontal:FASTframe:TIMEStamp:FRAMe:REF<x>? argument query.
Using the .verify(argument, value) method will send the HORizontal:FASTframe:TIMEStamp:FRAMe:REF<x>? argument query and raise an AssertionError if the returned value does not match value.

SCPI Syntax

- HORizontal:FASTframe:TIMEStamp:FRAMe:REF<x>? <NR1>

HorizontalFastframeTimestampRef ¶

Bases: SCPICmdRead

The HORizontal:FASTframe:TIMEStamp:REF command.

Description

This query-only command returns the absolute trigger date and time for FastFrame reference. The format of the output is as follows: DD MON YYYY HH:MM:SS.xxx xxx xxx xxx DD MON YYYY is day, month, and year HH:MM:SS is hours, minutes, and seconds .xxx xxx xxx xxx is fractions of a second to picoseconds

Usage

Using the .query() method will send the HORizontal:FASTframe:TIMEStamp:REF? query.
Using the .verify(value) method will send the HORizontal:FASTframe:TIMEStamp:REF? query and raise an AssertionError if the returned value does not match value.

SCPI Syntax

- HORizontal:FASTframe:TIMEStamp:REF?

HorizontalFastframeTimestampSelected ¶

Bases: SCPICmdRead

The HORizontal:FASTframe:TIMEStamp:SELECTED command tree.

Usage

Using the .query() method will send the HORizontal:FASTframe:TIMEStamp:SELECTED? query.
Using the .verify(value) method will send the HORizontal:FASTframe:TIMEStamp:SELECTED? query and raise an AssertionError if the returned value does not match value.

Properties

.ch: The HORizontal:FASTframe:TIMEStamp:SELECTED:CH<x> command.
.math: The HORizontal:FASTframe:TIMEStamp:SELECTED:MATH<x> command.
.ref: The HORizontal:FASTframe:TIMEStamp:SELECTED:REF<x> command.
.d: The HORizontal:FASTframe:TIMEStamp:SELECTED:D<x> command.

ch `property` ¶

ch: dict[int, HorizontalFastframeTimestampSelectedChannel]

Return the HORizontal:FASTframe:TIMEStamp:SELECTED:CH<x> command.

Description

This query-only command returns the absolute trigger date and time for the FastFrame Selected, within the specified waveform. Valid waveforms include CH, MATH and REF. The x variable can be expressed as an integer ranging from 1 through 4. The format of the output is as follows: DD MON YYYY HH:MM:SS.xxx xxx xxx xxx DD MON YYYY is day, month, and year HH:MM:SS is hours, minutes, and seconds .xxx xxx xxx xxx is fractions of a second to picoseconds

Usage

Using the .query() method will send the HORizontal:FASTframe:TIMEStamp:SELECTED:CH<x>? query.
Using the .verify(value) method will send the HORizontal:FASTframe:TIMEStamp:SELECTED:CH<x>? query and raise an AssertionError if the returned value does not match value.

SCPI Syntax

- HORizontal:FASTframe:TIMEStamp:SELECTED:CH<x>?

d `property` ¶

d: dict[int, HorizontalFastframeTimestampSelectedDigitalBit]

Return the HORizontal:FASTframe:TIMEStamp:SELECTED:D<x> command.

Description

This query-only command returns the absolute trigger date and time for the FastFrame Selected, within the specified waveform. Valid waveforms include CH, MATH and REF. The x variable can be expressed as an integer ranging from 1 through 4. The format of the output is as follows: DD MON YYYY HH:MM:SS.xxx xxx xxx xxx DD MON YYYY is day, month, and year HH:MM:SS is hours, minutes, and seconds .xxx xxx xxx xxx is fractions of a second to picoseconds

Usage

Using the .query() method will send the HORizontal:FASTframe:TIMEStamp:SELECTED:D<x>? query.
Using the .verify(value) method will send the HORizontal:FASTframe:TIMEStamp:SELECTED:D<x>? query and raise an AssertionError if the returned value does not match value.

SCPI Syntax

- HORizontal:FASTframe:TIMEStamp:SELECTED:D<x>?

math `property` ¶

math: dict[int, HorizontalFastframeTimestampSelectedMathItem]

Return the HORizontal:FASTframe:TIMEStamp:SELECTED:MATH<x> command.

Description

This query-only command returns the absolute trigger date and time for the FastFrame Selected, within the specified waveform. Valid waveforms include CH, MATH and REF. The x variable can be expressed as an integer ranging from 1 through 4. The format of the output is as follows: DD MON YYYY HH:MM:SS.xxx xxx xxx xxx DD MON YYYY is day, month, and year HH:MM:SS is hours, minutes, and seconds .xxx xxx xxx xxx is fractions of a second to picoseconds

Usage

Using the .query() method will send the HORizontal:FASTframe:TIMEStamp:SELECTED:MATH<x>? query.
Using the .verify(value) method will send the HORizontal:FASTframe:TIMEStamp:SELECTED:MATH<x>? query and raise an AssertionError if the returned value does not match value.

SCPI Syntax

- HORizontal:FASTframe:TIMEStamp:SELECTED:MATH<x>?

ref `property` ¶

ref: dict[int, HorizontalFastframeTimestampSelectedRefItem]

Return the HORizontal:FASTframe:TIMEStamp:SELECTED:REF<x> command.

Description

This query-only command returns the absolute trigger date and time for the FastFrame Selected, within the specified waveform. Valid waveforms include CH, MATH and REF. The x variable can be expressed as an integer ranging from 1 through 4. The format of the output is as follows: DD MON YYYY HH:MM:SS.xxx xxx xxx xxx DD MON YYYY is day, month, and year HH:MM:SS is hours, minutes, and seconds .xxx xxx xxx xxx is fractions of a second to picoseconds

Usage

Using the .query() method will send the HORizontal:FASTframe:TIMEStamp:SELECTED:REF<x>? query.
Using the .verify(value) method will send the HORizontal:FASTframe:TIMEStamp:SELECTED:REF<x>? query and raise an AssertionError if the returned value does not match value.

SCPI Syntax

- HORizontal:FASTframe:TIMEStamp:SELECTED:REF<x>?

HorizontalFastframeTimestampSelectedChannel ¶

Bases: ValidatedChannel, SCPICmdRead

The HORizontal:FASTframe:TIMEStamp:SELECTED:CH<x> command.

Description

This query-only command returns the absolute trigger date and time for the FastFrame Selected, within the specified waveform. Valid waveforms include CH, MATH and REF. The x variable can be expressed as an integer ranging from 1 through 4. The format of the output is as follows: DD MON YYYY HH:MM:SS.xxx xxx xxx xxx DD MON YYYY is day, month, and year HH:MM:SS is hours, minutes, and seconds .xxx xxx xxx xxx is fractions of a second to picoseconds

Usage

Using the .query() method will send the HORizontal:FASTframe:TIMEStamp:SELECTED:CH<x>? query.
Using the .verify(value) method will send the HORizontal:FASTframe:TIMEStamp:SELECTED:CH<x>? query and raise an AssertionError if the returned value does not match value.

SCPI Syntax

- HORizontal:FASTframe:TIMEStamp:SELECTED:CH<x>?

HorizontalFastframeTimestampSelectedDigitalBit ¶

Bases: ValidatedDigitalBit, SCPICmdRead

The HORizontal:FASTframe:TIMEStamp:SELECTED:D<x> command.

Description

This query-only command returns the absolute trigger date and time for the FastFrame Selected, within the specified waveform. Valid waveforms include CH, MATH and REF. The x variable can be expressed as an integer ranging from 1 through 4. The format of the output is as follows: DD MON YYYY HH:MM:SS.xxx xxx xxx xxx DD MON YYYY is day, month, and year HH:MM:SS is hours, minutes, and seconds .xxx xxx xxx xxx is fractions of a second to picoseconds

Usage

Using the .query() method will send the HORizontal:FASTframe:TIMEStamp:SELECTED:D<x>? query.
Using the .verify(value) method will send the HORizontal:FASTframe:TIMEStamp:SELECTED:D<x>? query and raise an AssertionError if the returned value does not match value.

SCPI Syntax

- HORizontal:FASTframe:TIMEStamp:SELECTED:D<x>?

HorizontalFastframeTimestampSelectedMathItem ¶

Bases: ValidatedDynamicNumberCmd, SCPICmdRead

The HORizontal:FASTframe:TIMEStamp:SELECTED:MATH<x> command.

Description

This query-only command returns the absolute trigger date and time for the FastFrame Selected, within the specified waveform. Valid waveforms include CH, MATH and REF. The x variable can be expressed as an integer ranging from 1 through 4. The format of the output is as follows: DD MON YYYY HH:MM:SS.xxx xxx xxx xxx DD MON YYYY is day, month, and year HH:MM:SS is hours, minutes, and seconds .xxx xxx xxx xxx is fractions of a second to picoseconds

Usage

Using the .query() method will send the HORizontal:FASTframe:TIMEStamp:SELECTED:MATH<x>? query.
Using the .verify(value) method will send the HORizontal:FASTframe:TIMEStamp:SELECTED:MATH<x>? query and raise an AssertionError if the returned value does not match value.

SCPI Syntax

- HORizontal:FASTframe:TIMEStamp:SELECTED:MATH<x>?

HorizontalFastframeTimestampSelectedRefItem ¶

Bases: ValidatedDynamicNumberCmd, SCPICmdRead

The HORizontal:FASTframe:TIMEStamp:SELECTED:REF<x> command.

Description

This query-only command returns the absolute trigger date and time for the FastFrame Selected, within the specified waveform. Valid waveforms include CH, MATH and REF. The x variable can be expressed as an integer ranging from 1 through 4. The format of the output is as follows: DD MON YYYY HH:MM:SS.xxx xxx xxx xxx DD MON YYYY is day, month, and year HH:MM:SS is hours, minutes, and seconds .xxx xxx xxx xxx is fractions of a second to picoseconds

Usage

Using the .query() method will send the HORizontal:FASTframe:TIMEStamp:SELECTED:REF<x>? query.
Using the .verify(value) method will send the HORizontal:FASTframe:TIMEStamp:SELECTED:REF<x>? query and raise an AssertionError if the returned value does not match value.

SCPI Syntax

- HORizontal:FASTframe:TIMEStamp:SELECTED:REF<x>?

HorizontalFastframeTrack ¶

Bases: SCPICmdWrite, SCPICmdRead

The HORizontal:FASTframe:TRACk command.

Description

This command sets up or queries the state of FastFrame tracking feature. This command is equivalent to selecting FastFrame Setup from the Horiz/Acq menu and then clicking the desired Frame Tracking state. When FastFrame Track is set to ‘live’, the channel and math waveforms are locked together. Adjusting a channel waveform also adjusts a related math waveform. All reference waveforms are also locked together but they are separate from channel and math waveforms. For example, when you set the Selected Frame Source Ch1 to Frame 3, then Selected Frame Ch2, Ch3, Ch4, Math1, Math2, Math3 and Math4 are also set to Frame 3. When you set the Selected Frame Source Ref1 to Frame 2, then Selected Frame Ref2, Ref3 and Ref4 are also set to Frame 2. If the Frame Tracking is set to Live, changing Selected Frame Ch1 will not affect the Selected Frame Ref1 frame of the Reference Frame setting. When FastFrame Track is set to ‘all’, the channel, math and reference waveforms are locked together. Adjusting a channel waveform also adjusts the related math and reference waveforms. For example, when you set the Selected Frame Source Ch1 to Frame 3, then Selected Frame Ch2, Ch3, Ch4, Math1, Math2, Math3, Math4, Ref1, Ref2, Ref3 and Ref4 are also set to Frame 3.

Usage

Using the .query() method will send the HORizontal:FASTframe:TRACk? query.
Using the .verify(value) method will send the HORizontal:FASTframe:TRACk? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the HORizontal:FASTframe:TRACk value command.

SCPI Syntax

- HORizontal:FASTframe:TRACk {LIVE|ALL}
- HORizontal:FASTframe:TRACk?

Info

LIVE sets FastFrame Track to Live.
ALL sets FastFrame Track to All.

HorizontalFastframeXzero ¶

Bases: SCPICmdRead

The HORizontal:FASTframe:XZEro command tree.

Usage

Using the .query() method will send the HORizontal:FASTframe:XZEro? query.
Using the .verify(value) method will send the HORizontal:FASTframe:XZEro? query and raise an AssertionError if the returned value does not match value.

Properties

.all: The HORizontal:FASTframe:XZEro:ALL command tree.
.frame: The HORizontal:FASTframe:XZEro:FRAme command tree.
.ref: The HORizontal:FASTframe:XZEro:REF command.
.selected: The HORizontal:FASTframe:XZEro:SELECTED command tree.

all `property` ¶

all: HorizontalFastframeXzeroAll

Return the HORizontal:FASTframe:XZEro:ALL command tree.

Usage

Using the .query() method will send the HORizontal:FASTframe:XZEro:ALL? query.
Using the .verify(value) method will send the HORizontal:FASTframe:XZEro:ALL? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.ch: The HORizontal:FASTframe:XZEro:ALL:CH<x> command.
.ref: The HORizontal:FASTframe:XZEro:ALL:REF<x> command.

frame `property` ¶

frame: HorizontalFastframeXzeroFrame

Return the HORizontal:FASTframe:XZEro:FRAme command tree.

Usage

Using the .query() method will send the HORizontal:FASTframe:XZEro:FRAme? query.
Using the .verify(value) method will send the HORizontal:FASTframe:XZEro:FRAme? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.ch: The HORizontal:FASTframe:XZEro:FRAme:CH<x> command.
.ref: The HORizontal:FASTframe:XZEro:FRAme:REF<x> command.

ref `property` ¶

ref: HorizontalFastframeXzeroRef

Return the HORizontal:FASTframe:XZEro:REF command.

Description

This command sets or queries the time from the trigger to the trigger sample on the reference waveform.

Usage

Using the .query() method will send the HORizontal:FASTframe:XZEro:REF? query.
Using the .verify(value) method will send the HORizontal:FASTframe:XZEro:REF? query and raise an AssertionError if the returned value does not match value.

SCPI Syntax

- HORizontal:FASTframe:XZEro:REF?

selected `property` ¶

selected: HorizontalFastframeXzeroSelected

Return the HORizontal:FASTframe:XZEro:SELECTED command tree.

Usage

Using the .query() method will send the HORizontal:FASTframe:XZEro:SELECTED? query.
Using the .verify(value) method will send the HORizontal:FASTframe:XZEro:SELECTED? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.ch: The HORizontal:FASTframe:XZEro:SELECTED:CH<x> command.
.ref: The HORizontal:FASTframe:XZEro:SELECTED:REF<x> command.

HorizontalFastframeXzeroAll ¶

Bases: SCPICmdRead

The HORizontal:FASTframe:XZEro:ALL command tree.

Usage

Using the .query() method will send the HORizontal:FASTframe:XZEro:ALL? query.
Using the .verify(value) method will send the HORizontal:FASTframe:XZEro:ALL? query and raise an AssertionError if the returned value does not match value.

Properties

.ch: The HORizontal:FASTframe:XZEro:ALL:CH<x> command.
.ref: The HORizontal:FASTframe:XZEro:ALL:REF<x> command.

ch `property` ¶

ch: dict[int, HorizontalFastframeXzeroAllChannel]

Return the HORizontal:FASTframe:XZEro:ALL:CH<x> command.

Description

This command queries the time from the trigger to the trigger sample of the specified frames on the specified channel.

Usage

Using the .query(argument) method will send the HORizontal:FASTframe:XZEro:ALL:CH<x>? argument query.
Using the .verify(argument, value) method will send the HORizontal:FASTframe:XZEro:ALL:CH<x>? argument query and raise an AssertionError if the returned value does not match value.

SCPI Syntax

- HORizontal:FASTframe:XZEro:ALL:CH<x>? <NR1>,<NR1>

Info

<NR1> specifies the first and last frame of a range of frames.

ref `property` ¶

ref: dict[int, HorizontalFastframeXzeroAllRefItem]

Return the HORizontal:FASTframe:XZEro:ALL:REF<x> command.

Description

This command queries the time from the trigger to the trigger sample of the specified frames on the specified reference.

Usage

Using the .query(argument) method will send the HORizontal:FASTframe:XZEro:ALL:REF<x>? argument query.
Using the .verify(argument, value) method will send the HORizontal:FASTframe:XZEro:ALL:REF<x>? argument query and raise an AssertionError if the returned value does not match value.

SCPI Syntax

- HORizontal:FASTframe:XZEro:ALL:REF<x>? <NR1>,<NR1>

Info

<NR1> specifies the first and last frame of a range of frames.

HorizontalFastframeXzeroAllChannel ¶

Bases: ValidatedChannel, SCPICmdReadWithArguments

The HORizontal:FASTframe:XZEro:ALL:CH<x> command.

Description

This command queries the time from the trigger to the trigger sample of the specified frames on the specified channel.

Usage

Using the .query(argument) method will send the HORizontal:FASTframe:XZEro:ALL:CH<x>? argument query.
Using the .verify(argument, value) method will send the HORizontal:FASTframe:XZEro:ALL:CH<x>? argument query and raise an AssertionError if the returned value does not match value.

SCPI Syntax

- HORizontal:FASTframe:XZEro:ALL:CH<x>? <NR1>,<NR1>

Info

<NR1> specifies the first and last frame of a range of frames.

HorizontalFastframeXzeroAllRefItem ¶

Bases: ValidatedDynamicNumberCmd, SCPICmdReadWithArguments

The HORizontal:FASTframe:XZEro:ALL:REF<x> command.

Description

This command queries the time from the trigger to the trigger sample of the specified frames on the specified reference.

Usage

Using the .query(argument) method will send the HORizontal:FASTframe:XZEro:ALL:REF<x>? argument query.
Using the .verify(argument, value) method will send the HORizontal:FASTframe:XZEro:ALL:REF<x>? argument query and raise an AssertionError if the returned value does not match value.

SCPI Syntax

- HORizontal:FASTframe:XZEro:ALL:REF<x>? <NR1>,<NR1>

Info

<NR1> specifies the first and last frame of a range of frames.

HorizontalFastframeXzeroFrame ¶

Bases: SCPICmdRead

The HORizontal:FASTframe:XZEro:FRAme command tree.

Usage

Using the .query() method will send the HORizontal:FASTframe:XZEro:FRAme? query.
Using the .verify(value) method will send the HORizontal:FASTframe:XZEro:FRAme? query and raise an AssertionError if the returned value does not match value.

Properties

.ch: The HORizontal:FASTframe:XZEro:FRAme:CH<x> command.
.ref: The HORizontal:FASTframe:XZEro:FRAme:REF<x> command.

ch `property` ¶

ch: dict[int, HorizontalFastframeXzeroFrameChannel]

Return the HORizontal:FASTframe:XZEro:FRAme:CH<x> command.

Description

This command queries the time from the trigger to the trigger sample of the specified frame on the specified channel.

Usage

Using the .query(argument) method will send the HORizontal:FASTframe:XZEro:FRAme:CH<x>? argument query.
Using the .verify(argument, value) method will send the HORizontal:FASTframe:XZEro:FRAme:CH<x>? argument query and raise an AssertionError if the returned value does not match value.

SCPI Syntax

- HORizontal:FASTframe:XZEro:FRAme:CH<x>? <NR1>

Info

<NR1> specifies a frame on the specified channel.

ref `property` ¶

ref: dict[int, HorizontalFastframeXzeroFrameRefItem]

Return the HORizontal:FASTframe:XZEro:FRAme:REF<x> command.

Description

This command queries the time from the trigger to the trigger sample of the specified frame on the specified reference.

Usage

Using the .query(argument) method will send the HORizontal:FASTframe:XZEro:FRAme:REF<x>? argument query.
Using the .verify(argument, value) method will send the HORizontal:FASTframe:XZEro:FRAme:REF<x>? argument query and raise an AssertionError if the returned value does not match value.

SCPI Syntax

- HORizontal:FASTframe:XZEro:FRAme:REF<x>? <NR1>

Info

<NR1> specifies a frame on the specified reference.

HorizontalFastframeXzeroFrameChannel ¶

Bases: ValidatedChannel, SCPICmdReadWithArguments

The HORizontal:FASTframe:XZEro:FRAme:CH<x> command.

Description

This command queries the time from the trigger to the trigger sample of the specified frame on the specified channel.

Usage

Using the .query(argument) method will send the HORizontal:FASTframe:XZEro:FRAme:CH<x>? argument query.
Using the .verify(argument, value) method will send the HORizontal:FASTframe:XZEro:FRAme:CH<x>? argument query and raise an AssertionError if the returned value does not match value.

SCPI Syntax

- HORizontal:FASTframe:XZEro:FRAme:CH<x>? <NR1>

Info

<NR1> specifies a frame on the specified channel.

HorizontalFastframeXzeroFrameRefItem ¶

Bases: ValidatedDynamicNumberCmd, SCPICmdReadWithArguments

The HORizontal:FASTframe:XZEro:FRAme:REF<x> command.

Description

This command queries the time from the trigger to the trigger sample of the specified frame on the specified reference.

Usage

Using the .query(argument) method will send the HORizontal:FASTframe:XZEro:FRAme:REF<x>? argument query.
Using the .verify(argument, value) method will send the HORizontal:FASTframe:XZEro:FRAme:REF<x>? argument query and raise an AssertionError if the returned value does not match value.

SCPI Syntax

- HORizontal:FASTframe:XZEro:FRAme:REF<x>? <NR1>

Info

<NR1> specifies a frame on the specified reference.

HorizontalFastframeXzeroRef ¶

Bases: SCPICmdRead

The HORizontal:FASTframe:XZEro:REF command.

Description

This command sets or queries the time from the trigger to the trigger sample on the reference waveform.

Usage

Using the .query() method will send the HORizontal:FASTframe:XZEro:REF? query.
Using the .verify(value) method will send the HORizontal:FASTframe:XZEro:REF? query and raise an AssertionError if the returned value does not match value.

SCPI Syntax

- HORizontal:FASTframe:XZEro:REF?

HorizontalFastframeXzeroSelected ¶

Bases: SCPICmdRead

The HORizontal:FASTframe:XZEro:SELECTED command tree.

Usage

Using the .query() method will send the HORizontal:FASTframe:XZEro:SELECTED? query.
Using the .verify(value) method will send the HORizontal:FASTframe:XZEro:SELECTED? query and raise an AssertionError if the returned value does not match value.

Properties

.ch: The HORizontal:FASTframe:XZEro:SELECTED:CH<x> command.
.ref: The HORizontal:FASTframe:XZEro:SELECTED:REF<x> command.

ch `property` ¶

ch: dict[int, HorizontalFastframeXzeroSelectedChannel]

Return the HORizontal:FASTframe:XZEro:SELECTED:CH<x> command.

Description

This command sets or queries the time from the trigger to the trigger sample on the selected channel. CH can be CH1, CH2, CH3, or CH4.

Usage

Using the .query() method will send the HORizontal:FASTframe:XZEro:SELECTED:CH<x>? query.
Using the .verify(value) method will send the HORizontal:FASTframe:XZEro:SELECTED:CH<x>? query and raise an AssertionError if the returned value does not match value.

SCPI Syntax

- HORizontal:FASTframe:XZEro:SELECTED:CH<x>?

ref `property` ¶

ref: dict[int, HorizontalFastframeXzeroSelectedRefItem]

Return the HORizontal:FASTframe:XZEro:SELECTED:REF<x> command.

Description

This command sets or queries the time from the trigger to the trigger sample on the selected reference waveform. REF can be REF1, REF2, REF3, or REF4.

Usage

Using the .query() method will send the HORizontal:FASTframe:XZEro:SELECTED:REF<x>? query.
Using the .verify(value) method will send the HORizontal:FASTframe:XZEro:SELECTED:REF<x>? query and raise an AssertionError if the returned value does not match value.

SCPI Syntax

- HORizontal:FASTframe:XZEro:SELECTED:REF<x>?

HorizontalFastframeXzeroSelectedChannel ¶

Bases: ValidatedChannel, SCPICmdRead

The HORizontal:FASTframe:XZEro:SELECTED:CH<x> command.

Description

This command sets or queries the time from the trigger to the trigger sample on the selected channel. CH can be CH1, CH2, CH3, or CH4.

Usage

Using the .query() method will send the HORizontal:FASTframe:XZEro:SELECTED:CH<x>? query.
Using the .verify(value) method will send the HORizontal:FASTframe:XZEro:SELECTED:CH<x>? query and raise an AssertionError if the returned value does not match value.

SCPI Syntax

- HORizontal:FASTframe:XZEro:SELECTED:CH<x>?

HorizontalFastframeXzeroSelectedRefItem ¶

Bases: ValidatedDynamicNumberCmd, SCPICmdRead

The HORizontal:FASTframe:XZEro:SELECTED:REF<x> command.

Description

This command sets or queries the time from the trigger to the trigger sample on the selected reference waveform. REF can be REF1, REF2, REF3, or REF4.

Usage

Using the .query() method will send the HORizontal:FASTframe:XZEro:SELECTED:REF<x>? query.
Using the .verify(value) method will send the HORizontal:FASTframe:XZEro:SELECTED:REF<x>? query and raise an AssertionError if the returned value does not match value.

SCPI Syntax

- HORizontal:FASTframe:XZEro:SELECTED:REF<x>?

HorizontalMain ¶

Bases: SCPICmdRead

The HORizontal:MAIn command.

Description

This query-only command returns the time per division of the time base. This command is equivalent to selecting Position/Scale from the Horiz/Acq menu.

Usage

Using the .query() method will send the HORizontal:MAIn? query.
Using the .verify(value) method will send the HORizontal:MAIn? query and raise an AssertionError if the returned value does not match value.

SCPI Syntax

- HORizontal:MAIn?

Properties

.interpratio: The HORizontal:MAIn:INTERPRatio command.
.scale: The HORizontal:MAIn:SCAle command.
.units: The HORizontal:MAIn:UNIts command.
.delay: The HORizontal:MAIn:DELay command tree.

delay `property` ¶

delay: HorizontalMainDelay

Return the HORizontal:MAIn:DELay command tree.

Usage

Using the .query() method will send the HORizontal:MAIn:DELay? query.
Using the .verify(value) method will send the HORizontal:MAIn:DELay? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.mode: The HORizontal:MAIn:DELay:MODe command.
.position: The HORizontal:MAIn:DELay:POSition command.
.time: The HORizontal:MAIn:DELay:TIMe command.

interpratio `property` ¶

interpratio: HorizontalMainInterpratio

Return the HORizontal:MAIn:INTERPRatio command.

Description

This query-only command returns the Horizontal interpolation ratio.

Usage

Using the .query() method will send the HORizontal:MAIn:INTERPRatio? query.
Using the .verify(value) method will send the HORizontal:MAIn:INTERPRatio? query and raise an AssertionError if the returned value does not match value.

SCPI Syntax

- HORizontal:MAIn:INTERPRatio?

scale `property` ¶

scale: HorizontalMainScale

Return the HORizontal:MAIn:SCAle command.

Description

This c

Usage

Using the .query() method will send the HORizontal:MAIn:SCAle? query.
Using the .verify(value) method will send the HORizontal:MAIn:SCAle? query and raise an AssertionError if the returned value does not match value.
Using the .write() method will send the HORizontal:MAIn:SCAle command.

SCPI Syntax

- HORizontal:MAIn:SCAle
- HORizontal:MAIn:SCAle?

units `property` ¶

units: HorizontalMainUnits

Return the HORizontal:MAIn:UNIts command.

Description

This command sets or queries the units for the horizontal time base. It is equivalent to setting the HORizontal:MAIn:UNIts:STRing.

Usage

Using the .query() method will send the HORizontal:MAIn:UNIts? query.
Using the .verify(value) method will send the HORizontal:MAIn:UNIts? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the HORizontal:MAIn:UNIts value command.

SCPI Syntax

- HORizontal:MAIn:UNIts <QString>
- HORizontal:MAIn:UNIts?

Info

<QString> is the time base units string.

Sub-properties

.string: The HORizontal:MAIn:UNIts:STRing command.

HorizontalMainDelay ¶

Bases: SCPICmdRead

The HORizontal:MAIn:DELay command tree.

Usage

Using the .query() method will send the HORizontal:MAIn:DELay? query.
Using the .verify(value) method will send the HORizontal:MAIn:DELay? query and raise an AssertionError if the returned value does not match value.

Properties

.mode: The HORizontal:MAIn:DELay:MODe command.
.position: The HORizontal:MAIn:DELay:POSition command.
.time: The HORizontal:MAIn:DELay:TIMe command.

mode `property` ¶

mode: HorizontalMainDelayMode

Return the HORizontal:MAIn:DELay:MODe command.

Description

This command sets or queries the time base trigger delay mode. This command is equivalent to choosing Delay Mode On from the Horiz/Acq menu.

Usage

Using the .query() method will send the HORizontal:MAIn:DELay:MODe? query.
Using the .verify(value) method will send the HORizontal:MAIn:DELay:MODe? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the HORizontal:MAIn:DELay:MODe value command.

SCPI Syntax

- HORizontal:MAIn:DELay:MODe {ON|OFF|<NR1>}
- HORizontal:MAIn:DELay:MODe?

Info

<NR1> = 0 disables the time base trigger delay mode, any other value enables the time base trigger delay mode.
ON enables the time base trigger delay mode.
OFF disables the time base trigger delay mode.

position `property` ¶

position: HorizontalMainDelayPosition

Return the HORizontal:MAIn:DELay:POSition command.

Description

This command sets or queries the time base position when Horizontal Delay Mode is turned on. This command is equivalent to selecting Horizontal/Acquisition Setup from the Horiz/Acq menu and then entering a Ref Point value.

Usage

Using the .query() method will send the HORizontal:MAIn:DELay:POSition? query.
Using the .verify(value) method will send the HORizontal:MAIn:DELay:POSition? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the HORizontal:MAIn:DELay:POSition value command.

SCPI Syntax

- HORizontal:MAIn:DELay:POSition <NR3>
- HORizontal:MAIn:DELay:POSition?

Info

<NR3> is from 0 to ≈100 and is the percentage of the waveform that is displayed left of the center graticule.

time `property` ¶

time: HorizontalMainDelayTime

Return the HORizontal:MAIn:DELay:TIMe command.

Description

This command sets or queries the time base trigger delay time. This command is equivalent to selecting Position/Scale from the Horiz/Acq menu and choosing a value for Horiz Delay.

Usage

Using the .query() method will send the HORizontal:MAIn:DELay:TIMe? query.
Using the .verify(value) method will send the HORizontal:MAIn:DELay:TIMe? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the HORizontal:MAIn:DELay:TIMe value command.

SCPI Syntax

- HORizontal:MAIn:DELay:TIMe <NR3>
- HORizontal:MAIn:DELay:TIMe?

Info

<NR3> specifies the time base trigger delay time setting, typically represented in seconds.

HorizontalMainDelayMode ¶

Bases: SCPICmdWrite, SCPICmdRead

The HORizontal:MAIn:DELay:MODe command.

Description

This command sets or queries the time base trigger delay mode. This command is equivalent to choosing Delay Mode On from the Horiz/Acq menu.

Usage

Using the .query() method will send the HORizontal:MAIn:DELay:MODe? query.
Using the .verify(value) method will send the HORizontal:MAIn:DELay:MODe? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the HORizontal:MAIn:DELay:MODe value command.

SCPI Syntax

- HORizontal:MAIn:DELay:MODe {ON|OFF|<NR1>}
- HORizontal:MAIn:DELay:MODe?

Info

<NR1> = 0 disables the time base trigger delay mode, any other value enables the time base trigger delay mode.
ON enables the time base trigger delay mode.
OFF disables the time base trigger delay mode.

HorizontalMainDelayPosition ¶

Bases: SCPICmdWrite, SCPICmdRead

The HORizontal:MAIn:DELay:POSition command.

Description

This command sets or queries the time base position when Horizontal Delay Mode is turned on. This command is equivalent to selecting Horizontal/Acquisition Setup from the Horiz/Acq menu and then entering a Ref Point value.

Usage

Using the .query() method will send the HORizontal:MAIn:DELay:POSition? query.
Using the .verify(value) method will send the HORizontal:MAIn:DELay:POSition? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the HORizontal:MAIn:DELay:POSition value command.

SCPI Syntax

- HORizontal:MAIn:DELay:POSition <NR3>
- HORizontal:MAIn:DELay:POSition?

Info

<NR3> is from 0 to ≈100 and is the percentage of the waveform that is displayed left of the center graticule.

HorizontalMainDelayTime ¶

Bases: SCPICmdWrite, SCPICmdRead

The HORizontal:MAIn:DELay:TIMe command.

Description

This command sets or queries the time base trigger delay time. This command is equivalent to selecting Position/Scale from the Horiz/Acq menu and choosing a value for Horiz Delay.

Usage

Using the .query() method will send the HORizontal:MAIn:DELay:TIMe? query.
Using the .verify(value) method will send the HORizontal:MAIn:DELay:TIMe? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the HORizontal:MAIn:DELay:TIMe value command.

SCPI Syntax

- HORizontal:MAIn:DELay:TIMe <NR3>
- HORizontal:MAIn:DELay:TIMe?

Info

<NR3> specifies the time base trigger delay time setting, typically represented in seconds.

HorizontalMainInterpratio ¶

Bases: SCPICmdRead

The HORizontal:MAIn:INTERPRatio command.

Description

This query-only command returns the Horizontal interpolation ratio.

Usage

Using the .query() method will send the HORizontal:MAIn:INTERPRatio? query.
Using the .verify(value) method will send the HORizontal:MAIn:INTERPRatio? query and raise an AssertionError if the returned value does not match value.

SCPI Syntax

- HORizontal:MAIn:INTERPRatio?

HorizontalMainScale ¶

Bases: SCPICmdWriteNoArguments, SCPICmdRead

The HORizontal:MAIn:SCAle command.

Description

This c

Usage

Using the .query() method will send the HORizontal:MAIn:SCAle? query.
Using the .verify(value) method will send the HORizontal:MAIn:SCAle? query and raise an AssertionError if the returned value does not match value.
Using the .write() method will send the HORizontal:MAIn:SCAle command.

SCPI Syntax

- HORizontal:MAIn:SCAle
- HORizontal:MAIn:SCAle?

HorizontalMainUnits ¶

Bases: SCPICmdWrite, SCPICmdRead

The HORizontal:MAIn:UNIts command.

Description

This command sets or queries the units for the horizontal time base. It is equivalent to setting the HORizontal:MAIn:UNIts:STRing.

Usage

Using the .query() method will send the HORizontal:MAIn:UNIts? query.
Using the .verify(value) method will send the HORizontal:MAIn:UNIts? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the HORizontal:MAIn:UNIts value command.

SCPI Syntax

- HORizontal:MAIn:UNIts <QString>
- HORizontal:MAIn:UNIts?

Info

<QString> is the time base units string.

Properties

.string: The HORizontal:MAIn:UNIts:STRing command.

string `property` ¶

string: HorizontalMainUnitsString

Return the HORizontal:MAIn:UNIts:STRing command.

Description

This command sets or queries the units string for the horizontal time base.

Usage

Using the .query() method will send the HORizontal:MAIn:UNIts:STRing? query.
Using the .verify(value) method will send the HORizontal:MAIn:UNIts:STRing? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the HORizontal:MAIn:UNIts:STRing value command.

SCPI Syntax

- HORizontal:MAIn:UNIts:STRing <QString>
- HORizontal:MAIn:UNIts:STRing?

Info

<QString> is the time base units string.

HorizontalMainUnitsString ¶

Bases: SCPICmdWrite, SCPICmdRead

The HORizontal:MAIn:UNIts:STRing command.

Description

This command sets or queries the units string for the horizontal time base.

Usage

Using the .query() method will send the HORizontal:MAIn:UNIts:STRing? query.
Using the .verify(value) method will send the HORizontal:MAIn:UNIts:STRing? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the HORizontal:MAIn:UNIts:STRing value command.

SCPI Syntax

- HORizontal:MAIn:UNIts:STRing <QString>
- HORizontal:MAIn:UNIts:STRing?

Info

<QString> is the time base units string.

HorizontalMode ¶

Bases: SCPICmdWrite, SCPICmdRead

The HORizontal:MODE command.

Description

This command set or queries the horizontal mode. Auto mode is the factory default.

Usage

Using the .query() method will send the HORizontal:MODE? query.
Using the .verify(value) method will send the HORizontal:MODE? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the HORizontal:MODE value command.

SCPI Syntax

- HORizontal:MODE {AUTO|CONStant|MANual}
- HORizontal:MODE?

Info

AUTO selects the automatic horizontal model. Auto mode attempts to keep record length constant as you change the time per division setting. Record length is read only.
CONSTANT selects the constant horizontal model. Constant mode attempts to keep sample rate constant as you change the time per division setting. Record length is read only.
MANUAL selects the manual horizontal model. Manual mode lets you change sample mode and record length. Time per division or Horizontal scale is read only.

Properties

.auto: The HORizontal:MODE:AUTO command tree.
.recordlength: The HORizontal:MODE:RECOrdlength command.
.samplerate: The HORizontal:MODE:SAMPLERate command.
.scale: The HORizontal:MODE:SCAle command.

auto `property` ¶

auto: HorizontalModeAuto

Return the HORizontal:MODE:AUTO command tree.

Usage

Using the .query() method will send the HORizontal:MODE:AUTO? query.
Using the .verify(value) method will send the HORizontal:MODE:AUTO? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.limitrecordlen: The HORizontal:MODE:AUTO:LIMITrecordlen command.

recordlength `property` ¶

recordlength: HorizontalModeRecordlength

Return the HORizontal:MODE:RECOrdlength command.

Description

This command sets or queries the record length.

Usage

Using the .query() method will send the HORizontal:MODE:RECOrdlength? query.
Using the .verify(value) method will send the HORizontal:MODE:RECOrdlength? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the HORizontal:MODE:RECOrdlength value command.

SCPI Syntax

- HORizontal:MODE:RECOrdlength <NR1>
- HORizontal:MODE:RECOrdlength?

Info

<NR1> is the record length in samples. Manual mode lets you change the record length, while the record length is read only for Automatic mode.

samplerate `property` ¶

samplerate: HorizontalModeSamplerate

Return the HORizontal:MODE:SAMPLERate command.

Description

This command sets or queries the sample rate.

Usage

Using the .query() method will send the HORizontal:MODE:SAMPLERate? query.
Using the .verify(value) method will send the HORizontal:MODE:SAMPLERate? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the HORizontal:MODE:SAMPLERate value command.

SCPI Syntax

- HORizontal:MODE:SAMPLERate <NR1>
- HORizontal:MODE:SAMPLERate?

Info

<NR1> is the sample rate in samples per second.

scale `property` ¶

scale: HorizontalModeScale

Return the HORizontal:MODE:SCAle command.

Description

This command sets or queries the horizontal scale.

Usage

Using the .query() method will send the HORizontal:MODE:SCAle? query.
Using the .verify(value) method will send the HORizontal:MODE:SCAle? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the HORizontal:MODE:SCAle value command.

SCPI Syntax

- HORizontal:MODE:SCAle <NR1>
- HORizontal:MODE:SCAle?

Info

<NR1> is the horizontal scale in seconds per division.

HorizontalModeAuto ¶

Bases: SCPICmdRead

The HORizontal:MODE:AUTO command tree.

Usage

Using the .query() method will send the HORizontal:MODE:AUTO? query.
Using the .verify(value) method will send the HORizontal:MODE:AUTO? query and raise an AssertionError if the returned value does not match value.

Properties

.limitrecordlen: The HORizontal:MODE:AUTO:LIMITrecordlen command.

limitrecordlen `property` ¶

limitrecordlen: HorizontalModeAutoLimitrecordlen

Return the HORizontal:MODE:AUTO:LIMITrecordlen command.

Description

This command sets or queries the record length limit used by the auto horizontal mode.

Usage

Using the .query() method will send the HORizontal:MODE:AUTO:LIMITrecordlen? query.
Using the .verify(value) method will send the HORizontal:MODE:AUTO:LIMITrecordlen? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the HORizontal:MODE:AUTO:LIMITrecordlen value command.

SCPI Syntax

- HORizontal:MODE:AUTO:LIMITrecordlen <NR1>
- HORizontal:MODE:AUTO:LIMITrecordlen?

Info

<NR1> is the record length limit in samples.

HorizontalModeAutoLimitrecordlen ¶

Bases: SCPICmdWrite, SCPICmdRead

The HORizontal:MODE:AUTO:LIMITrecordlen command.

Description

This command sets or queries the record length limit used by the auto horizontal mode.

Usage

Using the .query() method will send the HORizontal:MODE:AUTO:LIMITrecordlen? query.
Using the .verify(value) method will send the HORizontal:MODE:AUTO:LIMITrecordlen? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the HORizontal:MODE:AUTO:LIMITrecordlen value command.

SCPI Syntax

- HORizontal:MODE:AUTO:LIMITrecordlen <NR1>
- HORizontal:MODE:AUTO:LIMITrecordlen?

Info

<NR1> is the record length limit in samples.

HorizontalModeRecordlength ¶

Bases: SCPICmdWrite, SCPICmdRead

The HORizontal:MODE:RECOrdlength command.

Description

This command sets or queries the record length.

Usage

Using the .query() method will send the HORizontal:MODE:RECOrdlength? query.
Using the .verify(value) method will send the HORizontal:MODE:RECOrdlength? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the HORizontal:MODE:RECOrdlength value command.

SCPI Syntax

- HORizontal:MODE:RECOrdlength <NR1>
- HORizontal:MODE:RECOrdlength?

Info

<NR1> is the record length in samples. Manual mode lets you change the record length, while the record length is read only for Automatic mode.

HorizontalModeSamplerate ¶

Bases: SCPICmdWrite, SCPICmdRead

The HORizontal:MODE:SAMPLERate command.

Description

This command sets or queries the sample rate.

Usage

Using the .query() method will send the HORizontal:MODE:SAMPLERate? query.
Using the .verify(value) method will send the HORizontal:MODE:SAMPLERate? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the HORizontal:MODE:SAMPLERate value command.

SCPI Syntax

- HORizontal:MODE:SAMPLERate <NR1>
- HORizontal:MODE:SAMPLERate?

Info

<NR1> is the sample rate in samples per second.

HorizontalModeScale ¶

Bases: SCPICmdWrite, SCPICmdRead

The HORizontal:MODE:SCAle command.

Description

This command sets or queries the horizontal scale.

Usage

Using the .query() method will send the HORizontal:MODE:SCAle? query.
Using the .verify(value) method will send the HORizontal:MODE:SCAle? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the HORizontal:MODE:SCAle value command.

SCPI Syntax

- HORizontal:MODE:SCAle <NR1>
- HORizontal:MODE:SCAle?

Info

<NR1> is the horizontal scale in seconds per division.

HorizontalPosition ¶

Bases: SCPICmdWrite, SCPICmdRead

The HORizontal:POSition command.

Description

This command sets or queries the horizontal position as a percent of screen width. When Horizontal Delay Mode is turned off, this command is equivalent to adjusting the HORIZONTAL POSITION knob on the front panel. When Horizontal Delay Mode is turned on, the horizontal position is forced to 50%.

Usage

Using the .query() method will send the HORizontal:POSition? query.
Using the .verify(value) method will send the HORizontal:POSition? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the HORizontal:POSition value command.

SCPI Syntax

- HORizontal:POSition <NR3>
- HORizontal:POSition?

Info

<NR3> is from 0 to ≈100 and is the position of the trigger point on the screen (0 = left edge, 100 = right edge).

HorizontalRoll ¶

Bases: SCPICmdWrite, SCPICmdRead

The HORizontal:ROLL command.

Description

This command sets or queries the Roll Mode status. Use Roll Mode when you want to view data at very slow sweep speeds. It is useful for observing data samples on the screen as they occur. This command is equivalent to selecting Horizontal/Acquisition Setup from the Horiz/Acq menu, selecting the Acquisition tab, and setting the Roll Mode to Auto or Off.

Usage

Using the .query() method will send the HORizontal:ROLL? query.
Using the .verify(value) method will send the HORizontal:ROLL? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the HORizontal:ROLL value command.

SCPI Syntax

- HORizontal:ROLL {AUTO|OFF|ON}
- HORizontal:ROLL?

Info

AUTO enables Roll Mode, if the time/division is set appropriately.
OFF disables Roll Mode.
ON enables Roll Mode, if the time/division is set appropriately.

HorizontalTimestamp ¶

Bases: SCPICmdRead

The HORizontal:TIMEStamp command tree.

Usage

Using the .query() method will send the HORizontal:TIMEStamp? query.
Using the .verify(value) method will send the HORizontal:TIMEStamp? query and raise an AssertionError if the returned value does not match value.

Properties

.ch: The HORizontal:TIMEStamp:CH<x> command.
.ref: The HORizontal:TIMEStamp:REF<x> command.

ch `property` ¶

ch: dict[int, HorizontalTimestampChannel]

Return the HORizontal:TIMEStamp:CH<x> command.

Description

This query returns the horizontal timebase for the channel. The channel is specified by x. The value of x can range from 1 through 4.

Usage

Using the .query() method will send the HORizontal:TIMEStamp:CH<x>? query.
Using the .verify(value) method will send the HORizontal:TIMEStamp:CH<x>? query and raise an AssertionError if the returned value does not match value.

SCPI Syntax

- HORizontal:TIMEStamp:CH<x>?

ref `property` ¶

ref: dict[int, HorizontalTimestampRefItem]

Return the HORizontal:TIMEStamp:REF<x> command.

Description

This query returns the horizontal timebase for the reference waveform. The reference is specified by x. The value of x can range from 1 through 4.

Usage

Using the .query() method will send the HORizontal:TIMEStamp:REF<x>? query.
Using the .verify(value) method will send the HORizontal:TIMEStamp:REF<x>? query and raise an AssertionError if the returned value does not match value.

SCPI Syntax

- HORizontal:TIMEStamp:REF<x>?

HorizontalTimestampChannel ¶

Bases: ValidatedChannel, SCPICmdRead

The HORizontal:TIMEStamp:CH<x> command.

Description

This query returns the horizontal timebase for the channel. The channel is specified by x. The value of x can range from 1 through 4.

Usage

Using the .query() method will send the HORizontal:TIMEStamp:CH<x>? query.
Using the .verify(value) method will send the HORizontal:TIMEStamp:CH<x>? query and raise an AssertionError if the returned value does not match value.

SCPI Syntax

- HORizontal:TIMEStamp:CH<x>?

HorizontalTimestampRefItem ¶

Bases: ValidatedDynamicNumberCmd, SCPICmdRead

The HORizontal:TIMEStamp:REF<x> command.

Description

This query returns the horizontal timebase for the reference waveform. The reference is specified by x. The value of x can range from 1 through 4.

Usage

Using the .query() method will send the HORizontal:TIMEStamp:REF<x>? query.
Using the .verify(value) method will send the HORizontal:TIMEStamp:REF<x>? query and raise an AssertionError if the returned value does not match value.

SCPI Syntax

- HORizontal:TIMEStamp:REF<x>?

horizontal ¶

Horizontal ¶

acqduration property ¶

acqlength property ¶

digital property ¶

divisions property ¶

fastframe property ¶

main property ¶

mode property ¶

position property ¶

roll property ¶

timestamp property ¶

HorizontalAcqduration ¶

HorizontalAcqlength ¶

HorizontalDigital ¶

magnivu property ¶

recordlength property ¶

samplerate property ¶

HorizontalDigitalMagnivu ¶

position property ¶

HorizontalDigitalMagnivuPosition ¶

HorizontalDigitalRecordlength ¶

magnivu property ¶

main property ¶

HorizontalDigitalRecordlengthMagnivu ¶

HorizontalDigitalRecordlengthMain ¶

HorizontalDigitalSamplerate ¶

magnivu property ¶

main property ¶

HorizontalDigitalSamplerateMagnivu ¶

HorizontalDigitalSamplerateMain ¶

HorizontalDivisions ¶

HorizontalFastframe ¶

count property ¶

framelock property ¶

length property ¶

maxframes property ¶

multipleframes property ¶

ref property ¶

selected property ¶

sequence property ¶

singleframemath property ¶

sixteenbit property ¶

state property ¶

sumframe property ¶

timestamp property ¶

track property ¶

xzero property ¶

HorizontalFastframeCount ¶

HorizontalFastframeFramelock ¶

HorizontalFastframeLength ¶

HorizontalFastframeMaxframes ¶

HorizontalFastframeMultipleframes ¶

framestart property ¶

mode property ¶

numframes property ¶

HorizontalFastframeMultipleframesFramestart ¶

ch property ¶

d property ¶

math property ¶

ref property ¶

HorizontalFastframeMultipleframesFramestartChannel ¶

HorizontalFastframeMultipleframesFramestartDigitalBit ¶

HorizontalFastframeMultipleframesFramestartMathItem ¶

HorizontalFastframeMultipleframesFramestartRefItem ¶

HorizontalFastframeMultipleframesMode ¶

HorizontalFastframeMultipleframesNumframes ¶

ch property ¶

d property ¶

math property ¶

ref property ¶

HorizontalFastframeMultipleframesNumframesChannel ¶

HorizontalFastframeMultipleframesNumframesDigitalBit ¶

HorizontalFastframeMultipleframesNumframesMathItem ¶

HorizontalFastframeMultipleframesNumframesRefItem ¶

HorizontalFastframeRef ¶

frame property ¶

source property ¶

HorizontalFastframeRefFrame ¶

HorizontalFastframeRefSource ¶

acqduration `property` ¶

acqlength `property` ¶

digital `property` ¶

divisions `property` ¶

fastframe `property` ¶

main `property` ¶

mode `property` ¶

position `property` ¶

roll `property` ¶

timestamp `property` ¶

magnivu `property` ¶

recordlength `property` ¶

samplerate `property` ¶

position `property` ¶

magnivu `property` ¶

main `property` ¶

magnivu `property` ¶

main `property` ¶

count `property` ¶

framelock `property` ¶

length `property` ¶

maxframes `property` ¶

multipleframes `property` ¶

ref `property` ¶

selected `property` ¶

sequence `property` ¶

singleframemath `property` ¶

sixteenbit `property` ¶

state `property` ¶

sumframe `property` ¶

timestamp `property` ¶

track `property` ¶

xzero `property` ¶

framestart `property` ¶

mode `property` ¶

numframes `property` ¶

ch `property` ¶

d `property` ¶

math `property` ¶

ref `property` ¶

ch `property` ¶

d `property` ¶

math `property` ¶

ref `property` ¶

frame `property` ¶

source `property` ¶

ch `property` ¶

math `property` ¶

ref `property` ¶

source `property` ¶

all `property` ¶

between `property` ¶

delta `property` ¶

frame `property` ¶

ref `property` ¶

selected `property` ¶

ch `property` ¶

d `property` ¶

math `property` ¶

ref `property` ¶

ch `property` ¶

d `property` ¶

math `property` ¶

ref `property` ¶

ch `property` ¶

d `property` ¶

math `property` ¶

ref `property` ¶

ch `property` ¶

d `property` ¶

math `property` ¶

ref `property` ¶

ch `property` ¶

d `property` ¶

math `property` ¶

ref `property` ¶

all `property` ¶