status_and_error ¶

The status_and_error commands module.

These commands are used in the following models: DPO2K, DPO2KB, DPO4K, DPO4KB, DPO5K, DPO5KB, DPO70KC, DPO70KD, DPO70KDX, DPO70KSX, DPO7AX, DPO7K, DPO7KC, DSA70KC, DSA70KD, LPD6, MDO3, MDO3K, MDO4K, MDO4KB, MDO4KC, MSO2, MSO2K, MSO2KB, MSO4, MSO4B, MSO4K, MSO4KB, MSO5, MSO5B, MSO5K, MSO5KB, MSO5LP, MSO6, MSO6B, MSO70KC, MSO70KDX, TekScopePC

THIS FILE IS AUTO-GENERATED, IT SHOULD NOT BE MANUALLY MODIFIED.

Please report an issue if one is found.

Commands and Queries

- *PSC {ON|OFF|<NR1>}
- *PSC?
- *PUD {<Block>|<QString>}
- *PUD?

Psc ¶

Bases: SCPICmdWrite, SCPICmdRead

The *PSC command.

Description

This command sets and queries the power-on status flag that controls the automatic power-on handling of the DESER, SRER, and ESER registers. When *PSC is true, the DESER register is set to 255 and the SRER and ESER registers are set to 0 at power-on. When *PSC is false, the current values in the DESER, SRER, and ESER registers are preserved in nonvolatile memory when power is shut off and are restored at power-on.

Usage

Using the .query() method will send the *PSC? query.
Using the .verify(value) method will send the *PSC? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the *PSC value command.

SCPI Syntax

- *PSC {ON|OFF|<NR1>}
- *PSC?

Info

<NR1> = 0 sets the power-on status clear flag to false, disables the power-on clear and allows the instrument to possibly assert SRQ after power-on; any other value sets the power-on status clear flag to true, enabling the power-on status clear and prevents any SRQ assertion after power on.
OFF sets the power-on status clear flag to false, disables the power-on clear and allows the instrument to possibly assert SRQ after power-on.
ON sets the power-on status clear flag to true, enabling the power-on status clear and prevents any SRQ assertion after power on.

Pud ¶

Bases: SCPICmdWrite, SCPICmdRead

The *PUD command.

Description

This command sets or queries a string of Protected User Data. This data is protected by the PASSWord command. You can modify it only by first entering the correct password. This password is not necessary to query the data.

Usage

Using the .query() method will send the *PUD? query.
Using the .verify(value) method will send the *PUD? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the *PUD value command.

SCPI Syntax

- *PUD {<Block>|<QString>}
- *PUD?

Info

<Block> is a block containing up to 100 characters.
<QString> is a string containing up to 100 characters.