newpass ¶

The newpass commands module.

These commands are used in the following models: DPO2K, DPO2KB, DPO4K, DPO4KB, DPO5K, DPO5KB, DPO70KC, DPO70KD, DPO70KDX, DPO70KSX, DPO7AX, DPO7K, DPO7KC, DSA70KC, DSA70KD, LPD6, MDO3, MDO3K, MDO4K, MDO4KB, MDO4KC, MSO2, MSO2K, MSO2KB, MSO4, MSO4B, MSO4K, MSO4KB, MSO5, MSO5B, MSO5K, MSO5KB, MSO5LP, MSO6, MSO6B, MSO70KC, MSO70KDX

THIS FILE IS AUTO-GENERATED, IT SHOULD NOT BE MANUALLY MODIFIED.

Please report an issue if one is found.

Commands and Queries

- NEWpass <QString>

Newpass ¶

Bases: SCPICmdWrite

The NEWpass command.

Description

This command (no query form) changes the password that enables access to password protected data. The PASSWord command must be successfully executed before using this command or an execution error will be generated.

Usage

Using the .write(value) method will send the NEWpass value command.

SCPI Syntax

- NEWpass <QString>

Info

<QString> is the new password, which can contain up to 10 characters.