search ¶

The search commands module.

These commands are used in the following models: MSO2

THIS FILE IS AUTO-GENERATED, IT SHOULD NOT BE MANUALLY MODIFIED.

Please report an issue if one is found.

Commands and Queries

- SEARCH:ADDNew <QString>
- SEARCH:DELETEALL
- SEARCH:DELete <QString>
- SEARCH:LIST?
- SEARCH:SEARCH<x>:COPy {SEARCHtotrigger|TRIGgertosearch}
- SEARCH:SEARCH<x>:NAVigate {NEXT|PREVious|MIN|NONE|MAX}
- SEARCH:SEARCH<x>:TOTAL?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:CONDition {SOF|FRAMEtype|IDentifier|DATa|IDANDDATA|EOF|ERRor|FDBITS}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:CONDition?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:DIRection {READ|WRITE|NOCARE}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:DIRection?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:OFFSet <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:OFFSet?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:QUALifier {EQUal|LESSEQual|MOREEQua|UNEQual|LESSthan|MOREthan}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:QUALifier?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:SIZe <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:SIZe?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:ERRType {ACKMISS|BITSTUFFing|FORMERRor|ANYERRor}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:ERRType?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:FD:BRSBit {ONE|ZERo|NOCARE}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:FD:BRSBit?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:FD:ESIBit {ONE|ZERo|NOCARE}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:FD:ESIBit?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:FRAMEtype {DATa|ERRor|OVERLoad|REMote}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:FRAMEtype?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:IDentifier:MODe {EXTENDed|STandard}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:IDentifier:MODe?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:IDentifier:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:IDentifier:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:ADDRess:MODe {ADDR10|ADDR7}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:ADDRess:MODe?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:ADDRess:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:ADDRess:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:CONDition {ADDRess|ADDRANDDATA|DATa|ACKMISS|REPEATstart|STARt|STOP}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:CONDition?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:DATa:DIRection {NOCARE|READ|WRITE}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:DATa:DIRection?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:DATa:SIZe <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:DATa:SIZe?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:DATa:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:DATa:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:CONDition {DATA|IDANDDATA|ERRor|IDentifier|SLEEP|SYNCfield|WAKEup}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:CONDition?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa:HIVALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa:HIVALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa:QUALifier {EQual|LESSEQual|MOREEQual|UNEQual|LESSthan|MOREthan|INrange|OUTrange}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa:QUALifier?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa:SIZe <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa:SIZe?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:ERRTYPE {CHecksum|PARity|SYNC}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:ERRTYPE?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:IDentifier:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:IDentifier:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PARallel:DATa:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PARallel:DATa:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:RS232C:CONDition {DATa|EOp|PARItyerror|STARt}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:RS232C:CONDition?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:RS232C:DATa:SIZe <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:RS232C:DATa:SIZe?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:RS232C:DATa:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:RS232C:DATa:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:CONDition {START|FAST|SLOW|PAUSE|ERRor}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:CONDition?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:ERRType {FRAMELENgth|CRC}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:ERRType:CRC {FAST|SLOW}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:ERRType:CRC?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:ERRType?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN1A:HIVALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN1A:HIVALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN1A:QUALifier {EQual|UNEQual|LESSthan|MOREthan|LESSEQual|MOREEQual|INrange|OUTrange}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN1A:QUALifier?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN1A:VALue <Qstring>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN1A:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN2B:HIVALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN2B:HIVALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN2B:QUALifier {EQual|UNEQual|LESSthan|MOREthan|LESSEQual|MOREEQual|INrange|OUTrange}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN2B:QUALifier?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN2B:VALue <Qstring>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN2B:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:COUNTer:HIVALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:COUNTer:HIVALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:COUNTer:QUALifier {EQual|UNEQual|LESSthan|MOREthan|LESSEQual|MOREEQual|INrange|OUTrange}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:COUNTer:QUALifier?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:COUNTer:VALue <Qstring>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:COUNTer:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:INVERTNIBble:VALue <Qstring>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:INVERTNIBble:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:STATus:VALue <Qstring>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:STATus:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:PAUSE:QUALifier {EQual|UNEQual|LESSthan|MOREthan|LESSEQual|MOREEQual|INrange|OUTrange}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:PAUSE:QUALifier?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:PAUSE:TICKs:HIVALue <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:PAUSE:TICKs:HIVALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:PAUSE:TICKs:VALue <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:PAUSE:TICKs:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:SLOW:DATA:HIVALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:SLOW:DATA:HIVALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:SLOW:DATA:QUALifier {EQual|UNEQual|LESSthan|MOREthan|LESSEQual|MOREEQualINrange|OUTrange}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:SLOW:DATA:QUALifier?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:SLOW:DATA:VALue <Qstring>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:SLOW:DATA:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:SLOW:IDentifier:VALue <Qstring>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:SLOW:IDentifier:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SOUrce {B0|B1|B2|B3|B4|B5|B6|B7|B8|B9|B10|B11|B12|B13|B14|B15|B16}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SOUrce?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:CONDition {DATA|SS|STARTofframe}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:CONDition?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:DATa:SIZe <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:DATa:SIZe?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:DATa:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:DATa:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:SOURCETYpe {MISo|MOSi}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:SOURCETYpe?
- SEARCH:SEARCH<x>:TRIGger:A:EDGE:SLOpe {RISe|FALL|EITher}
- SEARCH:SEARCH<x>:TRIGger:A:EDGE:SLOpe?
- SEARCH:SEARCH<x>:TRIGger:A:EDGE:SOUrce {CH<x>|DCH<x>_D<x>|MATH<x>|REF<x>|REF<x>_D<x>}
- SEARCH:SEARCH<x>:TRIGger:A:EDGE:SOUrce?
- SEARCH:SEARCH<x>:TRIGger:A:EDGE:THReshold <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:EDGE:THReshold?
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:CLOCk:THReshold <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:CLOCk:THReshold?
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:DELTatime <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:DELTatime?
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:FUNCtion {AND|NANd|NOR|OR}
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:FUNCtion?
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:INPUT:CLOCK:SOUrce {CH<x>|DCH<x>_D<x>|REF<x>_D<x>}
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:INPUT:CLOCK:SOUrce?
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LEVel:CH<x> <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LEVel:CH<x>?
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LEVel:MATH<x> <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LEVel:MATH<x>?
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LEVel:REF<x> <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LEVel:REF<x>?
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LOGICPattern:CH<x> {H|L|X}
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LOGICPattern:CH<x>?
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LOGICPattern:DCH<x>_D<x> {H|L|X}
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LOGICPattern:DCH<x>_D<x>?
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LOGICPattern:MATH<x> {H|L|X}
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LOGICPattern:MATH<x>?
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LOGICPattern:REF<x> {H|L|X}
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LOGICPattern:REF<x>?
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:POLarity {POSitive|NEGative|EITher}
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:POLarity?
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:USEClockedge {ON|OFF|1|0}
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:USEClockedge?
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:WHEn {TRUe|FALSe|MOREThan|LESSThan|EQual|UNEQual}
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:WHEn?
- SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:HIGHLimit <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:HIGHLimit?
- SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:LOGICQUALification {ON|OFF}
- SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:LOGICQUALification?
- SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:LOWLimit <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:LOWLimit?
- SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:POLarity {POSitive|NEGative}
- SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:POLarity?
- SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:SOUrce {CH<x>|DCH<x>_D<x>|MATH<x>|REF<x>|REF<x>_D<x>}
- SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:SOUrce?
- SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:THReshold <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:THReshold?
- SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:WHEn {LESSthan|MOREthan|EQual|UNEQual|WIThin|OUTside}
- SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:WHEn?
- SEARCH:SEARCH<x>:TRIGger:A:RUNT:LOGICQUALification {ON|OFF}
- SEARCH:SEARCH<x>:TRIGger:A:RUNT:LOGICQUALification?
- SEARCH:SEARCH<x>:TRIGger:A:RUNT:POLarity {POSitive|NEGative|EITher}
- SEARCH:SEARCH<x>:TRIGger:A:RUNT:POLarity?
- SEARCH:SEARCH<x>:TRIGger:A:RUNT:SOUrce {CH<x>|REF<x>}
- SEARCH:SEARCH<x>:TRIGger:A:RUNT:THReshold:HIGH <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:RUNT:THReshold:HIGH?
- SEARCH:SEARCH<x>:TRIGger:A:RUNT:THReshold:LOW <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:RUNT:THReshold:LOW?
- SEARCH:SEARCH<x>:TRIGger:A:RUNT:WHEn {OCCURS|LESSthan|MOREthan|EQual}NOTEQual}
- SEARCH:SEARCH<x>:TRIGger:A:RUNT:WHEn?
- SEARCH:SEARCH<x>:TRIGger:A:RUNT:WIDth <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:RUNT:WIDth?
- SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:EDGE {FALL|RISe}
- SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:EDGE?
- SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:SOUrce {CH<x>|DCH<x>_D<x>|MATH<x>|REF<x>|REF<x>_D<x>}
- SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:SOUrce?
- SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:THReshold <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:THReshold?
- SEARCH:SEARCH<x>:TRIGger:A:SETHold:HOLDTime <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:SETHold:HOLDTime?
- SEARCH:SEARCH<x>:TRIGger:A:SETHold:LEVel:CH<x> <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:SETHold:LEVel:CH<x>?
- SEARCH:SEARCH<x>:TRIGger:A:SETHold:LEVel:MATH<x> <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:SETHold:LEVel:MATH<x>?
- SEARCH:SEARCH<x>:TRIGger:A:SETHold:LEVel:REF<x> <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:SETHold:LEVel:REF<x>?
- SEARCH:SEARCH<x>:TRIGger:A:SETHold:LOGICPattern:CH<x> {INCLude|DONTInclude}
- SEARCH:SEARCH<x>:TRIGger:A:SETHold:LOGICPattern:CH<x>?
- SEARCH:SEARCH<x>:TRIGger:A:SETHold:LOGICPattern:DCH<x>_D<x> {INCLude|DONTInclude}
- SEARCH:SEARCH<x>:TRIGger:A:SETHold:LOGICPattern:DCH<x>_D<x>?
- SEARCH:SEARCH<x>:TRIGger:A:SETHold:LOGICPattern:MATH<x> {INCLude|DONTInclude}
- SEARCH:SEARCH<x>:TRIGger:A:SETHold:LOGICPattern:MATH<x>?
- SEARCH:SEARCH<x>:TRIGger:A:SETHold:LOGICPattern:REF<x> {INCLude|DONTInclude}
- SEARCH:SEARCH<x>:TRIGger:A:SETHold:LOGICPattern:REF<x>?
- SEARCH:SEARCH<x>:TRIGger:A:SETHold:SETTime <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:SETHold:SETTime?
- SEARCH:SEARCH<x>:TRIGger:A:STATE {ON|OFF|<NR1>}
- SEARCH:SEARCH<x>:TRIGger:A:STATE?
- SEARCH:SEARCH<x>:TRIGger:A:STOPAcq {ON|OFF|<NR1>}
- SEARCH:SEARCH<x>:TRIGger:A:STOPAcq?
- SEARCH:SEARCH<x>:TRIGger:A:TIMEOut:LOGICQUALification {ON|OFF}
- SEARCH:SEARCH<x>:TRIGger:A:TIMEOut:LOGICQUALification?
- SEARCH:SEARCH<x>:TRIGger:A:TIMEOut:POLarity {STAYSHigh|STAYSLow|EITher}
- SEARCH:SEARCH<x>:TRIGger:A:TIMEOut:POLarity?
- SEARCH:SEARCH<x>:TRIGger:A:TIMEOut:SOUrce {CH<x>|DCH<x>_D<x>|MATH<x>|REF<x>|REF<x>_D<x>}
- SEARCH:SEARCH<x>:TRIGger:A:TIMEOut:SOUrce?
- SEARCH:SEARCH<x>:TRIGger:A:TIMEOut:THReshold <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:TIMEOut:THReshold?
- SEARCH:SEARCH<x>:TRIGger:A:TIMEOut:TIMe <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:TIMEOut:TIMe?
- SEARCH:SEARCH<x>:TRIGger:A:TYPe {EDGE|RUNT|TRANsition|PULSEWidth|TIMEOut|LOGIc|SETHold|Bus}
- SEARCH:SEARCH<x>:TRIGger:A:TYPe?
- SEARCH:SELected SEARCH1
- SEARCH:SELected?

Search ¶

Bases: SCPICmdRead

The SEARCH command tree.

Usage

Using the .query() method will send the SEARCH? query.
Using the .verify(value) method will send the SEARCH? query and raise an AssertionError if the returned value does not match value.

Properties

.addnew: The SEARCH:ADDNew command.
.deleteall: The SEARCH:DELETEALL command.
.delete: The SEARCH:DELete command.
.list: The SEARCH:LIST command.
.search: The SEARCH:SEARCH<x> command tree.
.selected: The SEARCH:SELected command.

addnew `property` ¶

addnew: SearchAddnew

Return the SEARCH:ADDNew command.

Description

This command adds the specified search.

Usage

Using the .write(value) method will send the SEARCH:ADDNew value command.

SCPI Syntax

- SEARCH:ADDNew <QString>

Info

<QString> is the specified search. The argument is of the form ‘SEARCH‘, where is ≥ 1.

delete `property` ¶

delete: SearchDelete

Return the SEARCH:DELete command.

Description

This command deletes the specified search.

Usage

Using the .write(value) method will send the SEARCH:DELete value command.

SCPI Syntax

- SEARCH:DELete <QString>

Info

<QString> is the specified search. The argument is of the form ‘SEARCH‘, where is ≥ 1).

deleteall `property` ¶

deleteall: SearchDeleteall

Return the SEARCH:DELETEALL command.

Description

This command deletes all the active instances of search definitions defined in the scope application.

Usage

Using the .write() method will send the SEARCH:DELETEALL command.

SCPI Syntax

- SEARCH:DELETEALL

list `property` ¶

list: SearchList

Return the SEARCH:LIST command.

Description

This command returns a comma separated list of all currently defined searches.

Usage

Using the .query() method will send the SEARCH:LIST? query.
Using the .verify(value) method will send the SEARCH:LIST? query and raise an AssertionError if the returned value does not match value.

SCPI Syntax

- SEARCH:LIST?

search `property` ¶

search: dict[int, SearchSearchItem]

Return the SEARCH:SEARCH<x> command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.copy: The SEARCH:SEARCH<x>:COPy command.
.navigate: The SEARCH:SEARCH<x>:NAVigate command.
.total: The SEARCH:SEARCH<x>:TOTAL command.
.trigger: The SEARCH:SEARCH<x>:TRIGger command tree.

selected `property` ¶

selected: SearchSelected

Return the SEARCH:SELected command.

Description

This command sets or queries the selected search, for example SEARCH1. The search number is specified by x.

Usage

Using the .query() method will send the SEARCH:SELected? query.
Using the .verify(value) method will send the SEARCH:SELected? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SELected value command.

SCPI Syntax

- SEARCH:SELected SEARCH1
- SEARCH:SELected?

Info

SEARCH1 is the specified search.

SearchAddnew ¶

Bases: SCPICmdWrite

The SEARCH:ADDNew command.

Description

This command adds the specified search.

Usage

Using the .write(value) method will send the SEARCH:ADDNew value command.

SCPI Syntax

- SEARCH:ADDNew <QString>

Info

<QString> is the specified search. The argument is of the form ‘SEARCH‘, where is ≥ 1.

SearchDelete ¶

Bases: SCPICmdWrite

The SEARCH:DELete command.

Description

This command deletes the specified search.

Usage

Using the .write(value) method will send the SEARCH:DELete value command.

SCPI Syntax

- SEARCH:DELete <QString>

Info

<QString> is the specified search. The argument is of the form ‘SEARCH‘, where is ≥ 1).

SearchDeleteall ¶

Bases: SCPICmdWriteNoArguments

The SEARCH:DELETEALL command.

Description

This command deletes all the active instances of search definitions defined in the scope application.

Usage

Using the .write() method will send the SEARCH:DELETEALL command.

SCPI Syntax

- SEARCH:DELETEALL

SearchList ¶

Bases: SCPICmdRead

The SEARCH:LIST command.

Description

This command returns a comma separated list of all currently defined searches.

Usage

Using the .query() method will send the SEARCH:LIST? query.
Using the .verify(value) method will send the SEARCH:LIST? query and raise an AssertionError if the returned value does not match value.

SCPI Syntax

- SEARCH:LIST?

SearchSearchItem ¶

Bases: ValidatedDynamicNumberCmd, SCPICmdRead

The SEARCH:SEARCH<x> command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>? query and raise an AssertionError if the returned value does not match value.

Properties

.copy: The SEARCH:SEARCH<x>:COPy command.
.navigate: The SEARCH:SEARCH<x>:NAVigate command.
.total: The SEARCH:SEARCH<x>:TOTAL command.
.trigger: The SEARCH:SEARCH<x>:TRIGger command tree.

copy `property` ¶

copy: SearchSearchItemCopy

Return the SEARCH:SEARCH<x>:COPy command.

Description

This command (no query form) copies the search criteria to or from the trigger. The search number is specified by x.

Usage

Using the .write(value) method will send the SEARCH:SEARCH<x>:COPy value command.

SCPI Syntax

- SEARCH:SEARCH<x>:COPy {SEARCHtotrigger|TRIGgertosearch}

Info

SEARCHtotrigger copies the search criteria to the trigger.
TRIGgertosearch copies the trigger criteria to the search.

navigate `property` ¶

navigate: SearchSearchItemNavigate

Return the SEARCH:SEARCH<x>:NAVigate command.

Description

This command sets the navigation action for search marks. The NONE action is the default setting when no action is being taken. The search number is specified by x.

Usage

Using the .write(value) method will send the SEARCH:SEARCH<x>:NAVigate value command.

SCPI Syntax

- SEARCH:SEARCH<x>:NAVigate {NEXT|PREVious|MIN|NONE|MAX}

Info

NEXT goes to the next search mark.
PREVious goes to the previous search mark.
MIN goes to the search result with the smallest value. Only supported by search results which have quantitative values (example: pulse width is supported, but not edge).
NONE is the default setting when no action is being taken.
MAX goes to the search result with the largest value. Only supported by search results which have quantitative values (example: pulse width is supported, but not edge).

total `property` ¶

total: SearchSearchItemTotal

Return the SEARCH:SEARCH<x>:TOTAL command.

Description

This query-only command returns the total number of found search marks for this search. The search number is specified by x.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TOTAL? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TOTAL? query and raise an AssertionError if the returned value does not match value.

SCPI Syntax

- SEARCH:SEARCH<x>:TOTAL?

trigger `property` ¶

trigger: SearchSearchItemTrigger

Return the SEARCH:SEARCH<x>:TRIGger command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.a: The SEARCH:SEARCH<x>:TRIGger:A command tree.

SearchSearchItemCopy ¶

Bases: SCPICmdWrite

The SEARCH:SEARCH<x>:COPy command.

Description

This command (no query form) copies the search criteria to or from the trigger. The search number is specified by x.

Usage

Using the .write(value) method will send the SEARCH:SEARCH<x>:COPy value command.

SCPI Syntax

- SEARCH:SEARCH<x>:COPy {SEARCHtotrigger|TRIGgertosearch}

Info

SEARCHtotrigger copies the search criteria to the trigger.
TRIGgertosearch copies the trigger criteria to the search.

SearchSearchItemNavigate ¶

Bases: SCPICmdWrite

The SEARCH:SEARCH<x>:NAVigate command.

Description

This command sets the navigation action for search marks. The NONE action is the default setting when no action is being taken. The search number is specified by x.

Usage

Using the .write(value) method will send the SEARCH:SEARCH<x>:NAVigate value command.

SCPI Syntax

- SEARCH:SEARCH<x>:NAVigate {NEXT|PREVious|MIN|NONE|MAX}

Info

NEXT goes to the next search mark.
PREVious goes to the previous search mark.
MIN goes to the search result with the smallest value. Only supported by search results which have quantitative values (example: pulse width is supported, but not edge).
NONE is the default setting when no action is being taken.
MAX goes to the search result with the largest value. Only supported by search results which have quantitative values (example: pulse width is supported, but not edge).

SearchSearchItemTotal ¶

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TOTAL command.

Description

This query-only command returns the total number of found search marks for this search. The search number is specified by x.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TOTAL? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TOTAL? query and raise an AssertionError if the returned value does not match value.

SCPI Syntax

- SEARCH:SEARCH<x>:TOTAL?

SearchSearchItemTrigger ¶

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger? query and raise an AssertionError if the returned value does not match value.

Properties

.a: The SEARCH:SEARCH<x>:TRIGger:A command tree.

a `property` ¶

a: SearchSearchItemTriggerA

Return the SEARCH:SEARCH<x>:TRIGger:A command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.bus: The SEARCH:SEARCH<x>:TRIGger:A:BUS command tree.
.edge: The SEARCH:SEARCH<x>:TRIGger:A:EDGE command tree.
.logic: The SEARCH:SEARCH<x>:TRIGger:A:LOGIc command tree.
.pulsewidth: The SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth command tree.
.runt: The SEARCH:SEARCH<x>:TRIGger:A:RUNT command tree.
.sethold: The SEARCH:SEARCH<x>:TRIGger:A:SETHold command tree.
.state: The SEARCH:SEARCH<x>:TRIGger:A:STATE command.
.stopacq: The SEARCH:SEARCH<x>:TRIGger:A:STOPAcq command.
.timeout: The SEARCH:SEARCH<x>:TRIGger:A:TIMEOut command tree.
.type: The SEARCH:SEARCH<x>:TRIGger:A:TYPe command.

SearchSearchItemTriggerA ¶

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A? query and raise an AssertionError if the returned value does not match value.

Properties

.bus: The SEARCH:SEARCH<x>:TRIGger:A:BUS command tree.
.edge: The SEARCH:SEARCH<x>:TRIGger:A:EDGE command tree.
.logic: The SEARCH:SEARCH<x>:TRIGger:A:LOGIc command tree.
.pulsewidth: The SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth command tree.
.runt: The SEARCH:SEARCH<x>:TRIGger:A:RUNT command tree.
.sethold: The SEARCH:SEARCH<x>:TRIGger:A:SETHold command tree.
.state: The SEARCH:SEARCH<x>:TRIGger:A:STATE command.
.stopacq: The SEARCH:SEARCH<x>:TRIGger:A:STOPAcq command.
.timeout: The SEARCH:SEARCH<x>:TRIGger:A:TIMEOut command tree.
.type: The SEARCH:SEARCH<x>:TRIGger:A:TYPe command.

bus `property` ¶

bus: SearchSearchItemTriggerABus

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.can: The SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN command tree.
.i2c: The SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C command tree.
.lin: The SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN command tree.
.parallel: The SEARCH:SEARCH<x>:TRIGger:A:BUS:PARallel command tree.
.rs232c: The SEARCH:SEARCH<x>:TRIGger:A:BUS:RS232C command tree.
.sent: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT command tree.
.source: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SOUrce command.
.spi: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SPI command tree.

edge `property` ¶

edge: SearchSearchItemTriggerAEdge

Return the SEARCH:SEARCH<x>:TRIGger:A:EDGE command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:EDGE? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:EDGE? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.slope: The SEARCH:SEARCH<x>:TRIGger:A:EDGE:SLOpe command.
.source: The SEARCH:SEARCH<x>:TRIGger:A:EDGE:SOUrce command.
.threshold: The SEARCH:SEARCH<x>:TRIGger:A:EDGE:THReshold command.

logic `property` ¶

logic: SearchSearchItemTriggerALogic

Return the SEARCH:SEARCH<x>:TRIGger:A:LOGIc command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.clock: The SEARCH:SEARCH<x>:TRIGger:A:LOGIc:CLOCk command tree.
.deltatime: The SEARCH:SEARCH<x>:TRIGger:A:LOGIc:DELTatime command.
.function: The SEARCH:SEARCH<x>:TRIGger:A:LOGIc:FUNCtion command.
.input: The SEARCH:SEARCH<x>:TRIGger:A:LOGIc:INPUT command tree.
.level: The SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LEVel command tree.
.logicpattern: The SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LOGICPattern command tree.
.polarity: The SEARCH:SEARCH<x>:TRIGger:A:LOGIc:POLarity command.
.useclockedge: The SEARCH:SEARCH<x>:TRIGger:A:LOGIc:USEClockedge command.
.when: The SEARCH:SEARCH<x>:TRIGger:A:LOGIc:WHEn command.

pulsewidth `property` ¶

pulsewidth: SearchSearchItemTriggerAPulsewidth

Return the SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.highlimit: The SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:HIGHLimit command.
.logicqualification: The SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:LOGICQUALification command.
.lowlimit: The SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:LOWLimit command.
.polarity: The SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:POLarity command.
.source: The SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:SOUrce command.
.threshold: The SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:THReshold command.
.when: The SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:WHEn command.

runt `property` ¶

runt: SearchSearchItemTriggerARunt

Return the SEARCH:SEARCH<x>:TRIGger:A:RUNT command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:RUNT? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:RUNT? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.logicqualification: The SEARCH:SEARCH<x>:TRIGger:A:RUNT:LOGICQUALification command.
.polarity: The SEARCH:SEARCH<x>:TRIGger:A:RUNT:POLarity command.
.source: The SEARCH:SEARCH<x>:TRIGger:A:RUNT:SOUrce command.
.threshold: The SEARCH:SEARCH<x>:TRIGger:A:RUNT:THReshold command tree.
.when: The SEARCH:SEARCH<x>:TRIGger:A:RUNT:WHEn command.
.width: The SEARCH:SEARCH<x>:TRIGger:A:RUNT:WIDth command.

sethold `property` ¶

sethold: SearchSearchItemTriggerASethold

Return the SEARCH:SEARCH<x>:TRIGger:A:SETHold command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.clock: The SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk command tree.
.holdtime: The SEARCH:SEARCH<x>:TRIGger:A:SETHold:HOLDTime command.
.level: The SEARCH:SEARCH<x>:TRIGger:A:SETHold:LEVel command tree.
.logicpattern: The SEARCH:SEARCH<x>:TRIGger:A:SETHold:LOGICPattern command tree.
.settime: The SEARCH:SEARCH<x>:TRIGger:A:SETHold:SETTime command.

state `property` ¶

state: SearchSearchItemTriggerAState

Return the SEARCH:SEARCH<x>:TRIGger:A:STATE command.

Description

This command sets or queries the enabled state of the search. The search number is specified by x.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:STATE? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:STATE? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:STATE value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:STATE {ON|OFF|<NR1>}
- SEARCH:SEARCH<x>:TRIGger:A:STATE?

Info

<NR1> = 1 enables the search. Any other character disables the search.
ON enables the search.
OFF disables the search.

stopacq `property` ¶

stopacq: SearchSearchItemTriggerAStopacq

Return the SEARCH:SEARCH<x>:TRIGger:A:STOPAcq command.

Description

This command sets or queries whether acquisitions are stopped when a search hit is found. The search number is specified by x.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:STOPAcq? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:STOPAcq? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:STOPAcq value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:STOPAcq {ON|OFF|<NR1>}
- SEARCH:SEARCH<x>:TRIGger:A:STOPAcq?

Info

<x> is the number of the search on which to enable or disable the stop acquisition function.
<NR1> = 1 enables stopping when a search hit is found. Any other character disables the feature.
ON enables stopping when a search hit is found.
OFF disables stopping on a search hit.

timeout `property` ¶

timeout: SearchSearchItemTriggerATimeout

Return the SEARCH:SEARCH<x>:TRIGger:A:TIMEOut command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:TIMEOut? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:TIMEOut? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.logicqualification: The SEARCH:SEARCH<x>:TRIGger:A:TIMEOut:LOGICQUALification command.
.polarity: The SEARCH:SEARCH<x>:TRIGger:A:TIMEOut:POLarity command.
.source: The SEARCH:SEARCH<x>:TRIGger:A:TIMEOut:SOUrce command.
.threshold: The SEARCH:SEARCH<x>:TRIGger:A:TIMEOut:THReshold command.
.time: The SEARCH:SEARCH<x>:TRIGger:A:TIMEOut:TIMe command.

type `property` ¶

type: SearchSearchItemTriggerAType

Return the SEARCH:SEARCH<x>:TRIGger:A:TYPe command.

Description

This command sets or queries the trigger type setting for a search to determine where to place a mark. The search number is specified by x.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:TYPe? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:TYPe? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:TYPe value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:TYPe {EDGE|RUNT|TRANsition|PULSEWidth|TIMEOut|LOGIc|SETHold|Bus}
- SEARCH:SEARCH<x>:TRIGger:A:TYPe?

Info

EDGE triggers when the source input signal amplitude crosses the specified level in the direction given by the slope.
RUNT triggers when a pulse crosses the first preset voltage threshold but does not cross the second preset threshold before recrossing the first. The thresholds are set with the SEARCH:SEARCH<x>:TRIGger:A:RUNt:HIGH and SEARCH:SEARCH<x>:TRIGger:A:RUNt:LOW THRESHOLD commands.
TRANsition triggers when a pulse crosses both thresholds in the same direction as the specified polarity and the transition time between the two threshold crossings is greater or less than the specified time delta.
PULSEWidth triggers on input signal source pulses that are inside or outside of the given time range specified by SEARCH:SEARCH<x>:TRIGger:A:LOGIc:PATtern:WHEn:LESSLimit and SEARCH:SEARCH<x>:TRIGger:A:LOGIc:PATtern:WHEn:MORELimit. The polarity is selected using the SEARCH:SEARCH<x>:TRIGger:A:RUNT: POLarity command.
TIMEOut triggers on an input signal source that stays above, stays below, or stays either above or beow the trigger level for a given time.
LOGIc specifies that a search occurs when specified conditions are met, and is controlled by the SEARCH:A:LOGIc commands.
SETHold triggers on a functional pattern combination of one to three data sources at the time of the clock transition.
Bus specifies that a search occurs when a communications signal is found.

SearchSearchItemTriggerABus ¶

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS? query and raise an AssertionError if the returned value does not match value.

Properties

.can: The SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN command tree.
.i2c: The SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C command tree.
.lin: The SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN command tree.
.parallel: The SEARCH:SEARCH<x>:TRIGger:A:BUS:PARallel command tree.
.rs232c: The SEARCH:SEARCH<x>:TRIGger:A:BUS:RS232C command tree.
.sent: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT command tree.
.source: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SOUrce command.
.spi: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SPI command tree.

can `property` ¶

can: SearchSearchItemTriggerABusCan

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.condition: The SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:CONDition command.
.data: The SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa command tree.
.errtype: The SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:ERRType command.
.fd: The SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:FD command tree.
.frametype: The SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:FRAMEtype command.
.identifier: The SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:IDentifier command tree.

i2c `property` ¶

i2c: SearchSearchItemTriggerABusI2c

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.address: The SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:ADDRess command tree.
.condition: The SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:CONDition command.
.data: The SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:DATa command tree.

lin `property` ¶

lin: SearchSearchItemTriggerABusLin

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.condition: The SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:CONDition command.
.data: The SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa command tree.
.errtype: The SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:ERRTYPE command.
.identifier: The SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:IDentifier command tree.

parallel `property` ¶

parallel: SearchSearchItemTriggerABusParallel

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:PARallel command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PARallel? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PARallel? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.data: The SEARCH:SEARCH<x>:TRIGger:A:BUS:PARallel:DATa command tree.

rs232c `property` ¶

rs232c: SearchSearchItemTriggerABusRs232c

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:RS232C command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:RS232C? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:RS232C? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.condition: The SEARCH:SEARCH<x>:TRIGger:A:BUS:RS232C:CONDition command.
.data: The SEARCH:SEARCH<x>:TRIGger:A:BUS:RS232C:DATa command tree.

sent `property` ¶

sent: SearchSearchItemTriggerABusSent

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.condition: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:CONDition command.
.errtype: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:ERRType command.
.fast: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST command tree.
.pause: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:PAUSE command tree.
.slow: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:SLOW command tree.

source `property` ¶

source: SearchSearchItemTriggerABusSource

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:SOUrce command.

Description

This command sets or queries the bus source for the bus search to determine where to place a mark. The search number is specified by x.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SOUrce? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SOUrce? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SOUrce value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:SOUrce {B0|B1|B2|B3|B4|B5|B6|B7|B8|B9|B10|B11|B12|B13|B14|B15|B16}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SOUrce?

Info

B<x> specifies the bus source as a bus number from B01 to B16. x has a minimum of 0 and a maximum of 16.

spi `property` ¶

spi: SearchSearchItemTriggerABusSpi

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:SPI command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SPI? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SPI? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.condition: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:CONDition command.
.data: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:DATa command tree.
.sourcetype: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:SOURCETYpe command.

SearchSearchItemTriggerABusCan ¶

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN? query and raise an AssertionError if the returned value does not match value.

Properties

.condition: The SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:CONDition command.
.data: The SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa command tree.
.errtype: The SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:ERRType command.
.fd: The SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:FD command tree.
.frametype: The SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:FRAMEtype command.
.identifier: The SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:IDentifier command tree.

condition `property` ¶

condition: SearchSearchItemTriggerABusCanCondition

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:CONDition command.

Description

This command sets or queries the search condition for a CAN bus. The search number is specified by x.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:CONDition? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:CONDition? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:CONDition value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:CONDition {SOF|FRAMEtype|IDentifier|DATa|IDANDDATA|EOF|ERRor|FDBITS}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:CONDition?

Info

SOF specifies the search condition for a CAN bus as start of frame.
FRAMEtype specifies the search condition for a CAN bus as frame type.
IDentifier specifies the search condition for a CAN bus as identifier.
IDANDDATA specifies the search condition for a CAN bus as ID and data.
EOF specifies the search condition for a CAN bus as end of frame.
ERRor specifies the search condition for a CAN bus as error.
FDBITS specifies the search condition for a CAN bus as FD bits.

data `property` ¶

data: SearchSearchItemTriggerABusCanData

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.direction: The SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:DIRection command.
.offset: The SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:OFFSet command.
.qualifier: The SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:QUALifier command.
.size: The SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:SIZe command.
.value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:VALue command.

errtype `property` ¶

errtype: SearchSearchItemTriggerABusCanErrtype

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:ERRType command.

Description

This command sets or queries the type of error condition for a CAN bus to search on. The search number is specified by x. The search condition must be set to ERRor.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:ERRType? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:ERRType? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:ERRType value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:ERRType {ACKMISS|BITSTUFFing|FORMERRor|ANYERRor}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:ERRType?

Info

ACKMISS specifies a search based on a missing ACK field.
BITSTUFFing specifies a search based on a bit stuffing error.
FORMERRor specifies a search based on a CAN FD form error. To use this option, the CAN standard must be set to FDISO or FDNONISO.
ANYERRor specifies a search based on any error type.

fd `property` ¶

fd: SearchSearchItemTriggerABusCanFd

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:FD command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:FD? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:FD? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.brsbit: The SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:FD:BRSBit command.
.esibit: The SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:FD:ESIBit command.

frametype `property` ¶

frametype: SearchSearchItemTriggerABusCanFrametype

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:FRAMEtype command.

Description

This command sets or queries CAN bus trigger frame type to be used when searching on a CAN bus signal. The search condition must be set to FRAMEtype. The search number is specified by x.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:FRAMEtype? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:FRAMEtype? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:FRAMEtype value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:FRAMEtype {DATa|ERRor|OVERLoad|REMote}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:FRAMEtype?

Info

DATa sets the frame type to data.
ERRor sets the frame type to error.
OVERLoad sets the frame type to overload.
REMote sets the frame type to remote.

identifier `property` ¶

identifier: SearchSearchItemTriggerABusCanIdentifier

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:IDentifier command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:IDentifier? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:IDentifier? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.mode: The SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:IDentifier:MODe command.
.value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:IDentifier:VALue command.

SearchSearchItemTriggerABusCanCondition ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:CONDition command.

Description

This command sets or queries the search condition for a CAN bus. The search number is specified by x.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:CONDition? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:CONDition? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:CONDition value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:CONDition {SOF|FRAMEtype|IDentifier|DATa|IDANDDATA|EOF|ERRor|FDBITS}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:CONDition?

Info

SOF specifies the search condition for a CAN bus as start of frame.
FRAMEtype specifies the search condition for a CAN bus as frame type.
IDentifier specifies the search condition for a CAN bus as identifier.
IDANDDATA specifies the search condition for a CAN bus as ID and data.
EOF specifies the search condition for a CAN bus as end of frame.
ERRor specifies the search condition for a CAN bus as error.
FDBITS specifies the search condition for a CAN bus as FD bits.

SearchSearchItemTriggerABusCanData ¶

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa? query and raise an AssertionError if the returned value does not match value.

Properties

.direction: The SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:DIRection command.
.offset: The SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:OFFSet command.
.qualifier: The SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:QUALifier command.
.size: The SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:SIZe command.
.value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:VALue command.

direction `property` ¶

direction: SearchSearchItemTriggerABusCanDataDirection

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:DIRection command.

Description

This command specifies the CAN search type to be valid on a Read, Write, or Either condition. The search number is specified by x.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:DIRection? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:DIRection? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:DIRection value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:DIRection {READ|WRITE|NOCARE}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:DIRection?

Info

READ specifies the read direction.
WRITE specifies the write direction.
NOCARE specifies either data direction.

offset `property` ¶

offset: SearchSearchItemTriggerABusCanDataOffset

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:OFFSet command.

Description

This command sets or queries the data offset value, in bytes, to use when searching on the CAN data field. The search number is specified by x. The search condition must be set to DATA or IDANDDATA.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:OFFSet? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:OFFSet? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:OFFSet value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:OFFSet <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:OFFSet?

Info

<NR1> is an integer whose minimum and default values are -1 (don’t care) and maximum is up to 7 (for CAN 2.0) or up to 63 (for ISO CAN FD and Non-ISO CAN FD). The maximum is dependent on the number of bytes being matched and the CAN standard selected. Its value is calculated as [Absolute Maximum] - [Data Match Size]. For CAN 2.0, the absolute maximum is 8 bytes. For ISO CAN FD and Non-ISO CAN FD, the absolute maximum is 64 bytes. The minimum data match size is 1 byte, which produces the ranges listed above. Increasing the data match size above 1 byte will adjust the range of valid data offset values accordingly.

qualifier `property` ¶

qualifier: SearchSearchItemTriggerABusCanDataQualifier

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:QUALifier command.

Description

This command sets or queries the CAN bus trigger data qualifier to be used when searching on a CAN bus signal. The search number is specified by x.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:QUALifier? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:QUALifier? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:QUALifier value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:QUALifier {EQUal|LESSEQual|MOREEQua|UNEQual|LESSthan|MOREthan}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:QUALifier?

Info

EQUal sets the data qualifier to equal.
LESSEQual sets the data qualifier to less equal.
MOREEQua sets the data qualifier to more equal.
UNEQual sets the data qualifier to unequal.
LESSthan sets the data qualifier to less than.
MOREthan sets the data qualifier to more than.

size `property` ¶

size: SearchSearchItemTriggerABusCanDataSize

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:SIZe command.

Description

This command sets or queries the length of the data string, in bytes, to be used when searching on a CAN bus signal. The search condition must be set to IDANDDATA or DATA. The search number is specified by x.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:SIZe? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:SIZe? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:SIZe value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:SIZe <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:SIZe?

Info

<NR1> specifies the data size.

value `property` ¶

value: SearchSearchItemTriggerABusCanDataValue

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:VALue command.

Description

This command sets or queries the binary data value to be used when searching on a CAN bus signal. The search condition must be set to IDANDDATA OR DATA.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:VALue? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:VALue? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:VALue value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:VALue?

Info

<QString>

SearchSearchItemTriggerABusCanDataDirection ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:DIRection command.

Description

This command specifies the CAN search type to be valid on a Read, Write, or Either condition. The search number is specified by x.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:DIRection? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:DIRection? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:DIRection value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:DIRection {READ|WRITE|NOCARE}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:DIRection?

Info

READ specifies the read direction.
WRITE specifies the write direction.
NOCARE specifies either data direction.

SearchSearchItemTriggerABusCanDataOffset ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:OFFSet command.

Description

This command sets or queries the data offset value, in bytes, to use when searching on the CAN data field. The search number is specified by x. The search condition must be set to DATA or IDANDDATA.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:OFFSet? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:OFFSet? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:OFFSet value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:OFFSet <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:OFFSet?

Info

<NR1> is an integer whose minimum and default values are -1 (don’t care) and maximum is up to 7 (for CAN 2.0) or up to 63 (for ISO CAN FD and Non-ISO CAN FD). The maximum is dependent on the number of bytes being matched and the CAN standard selected. Its value is calculated as [Absolute Maximum] - [Data Match Size]. For CAN 2.0, the absolute maximum is 8 bytes. For ISO CAN FD and Non-ISO CAN FD, the absolute maximum is 64 bytes. The minimum data match size is 1 byte, which produces the ranges listed above. Increasing the data match size above 1 byte will adjust the range of valid data offset values accordingly.

SearchSearchItemTriggerABusCanDataQualifier ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:QUALifier command.

Description

This command sets or queries the CAN bus trigger data qualifier to be used when searching on a CAN bus signal. The search number is specified by x.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:QUALifier? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:QUALifier? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:QUALifier value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:QUALifier {EQUal|LESSEQual|MOREEQua|UNEQual|LESSthan|MOREthan}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:QUALifier?

Info

EQUal sets the data qualifier to equal.
LESSEQual sets the data qualifier to less equal.
MOREEQua sets the data qualifier to more equal.
UNEQual sets the data qualifier to unequal.
LESSthan sets the data qualifier to less than.
MOREthan sets the data qualifier to more than.

SearchSearchItemTriggerABusCanDataSize ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:SIZe command.

Description

This command sets or queries the length of the data string, in bytes, to be used when searching on a CAN bus signal. The search condition must be set to IDANDDATA or DATA. The search number is specified by x.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:SIZe? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:SIZe? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:SIZe value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:SIZe <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:SIZe?

Info

<NR1> specifies the data size.

SearchSearchItemTriggerABusCanDataValue ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:VALue command.

Description

This command sets or queries the binary data value to be used when searching on a CAN bus signal. The search condition must be set to IDANDDATA OR DATA.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:VALue? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:VALue? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:VALue value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:VALue?

Info

<QString>

SearchSearchItemTriggerABusCanErrtype ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:ERRType command.

Description

This command sets or queries the type of error condition for a CAN bus to search on. The search number is specified by x. The search condition must be set to ERRor.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:ERRType? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:ERRType? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:ERRType value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:ERRType {ACKMISS|BITSTUFFing|FORMERRor|ANYERRor}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:ERRType?

Info

ACKMISS specifies a search based on a missing ACK field.
BITSTUFFing specifies a search based on a bit stuffing error.
FORMERRor specifies a search based on a CAN FD form error. To use this option, the CAN standard must be set to FDISO or FDNONISO.
ANYERRor specifies a search based on any error type.

SearchSearchItemTriggerABusCanFd ¶

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:FD command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:FD? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:FD? query and raise an AssertionError if the returned value does not match value.

Properties

.brsbit: The SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:FD:BRSBit command.
.esibit: The SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:FD:ESIBit command.

brsbit `property` ¶

brsbit: SearchSearchItemTriggerABusCanFdBrsbit

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:FD:BRSBit command.

Description

This command sets or queries the value of the bit rate switch bit (BRS bit) for a CAN bus to search on. The search number is specified by x. The search condition must be set to FDBITS, and the CAN standard must be FDISO or FDNONISO.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:FD:BRSBit? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:FD:BRSBit? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:FD:BRSBit value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:FD:BRSBit {ONE|ZERo|NOCARE}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:FD:BRSBit?

Info

ONE filters CAN FD packets to only match those where the BRS bit has a value of 1 (fast data enabled).
ZERo filters CAN FD packets to only match those where the BRS bit has a value of 0 (fast data disabled).
NOCARE disables filtering of CAN FD packets on the BRS bit.

esibit `property` ¶

esibit: SearchSearchItemTriggerABusCanFdEsibit

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:FD:ESIBit command.

Description

This command sets or queries the value of the error state indicator bit (ESI bit) for a CAN bus to search on. The search number is specified by x. The search condition must be set to FDBITS, and the CAN standard must be FDISO or FDNONISO.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:FD:ESIBit? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:FD:ESIBit? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:FD:ESIBit value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:FD:ESIBit {ONE|ZERo|NOCARE}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:FD:ESIBit?

Info

ONE filters CAN FD packets to only match those where the ESI bit has a value of 1 (recessive).
ZERo filters CAN FD packets to only match those where the ESI bit has a value of 0 (dominant).
NOCARE disables filtering of CAN FD packets on the ESI bit.

SearchSearchItemTriggerABusCanFdBrsbit ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:FD:BRSBit command.

Description

This command sets or queries the value of the bit rate switch bit (BRS bit) for a CAN bus to search on. The search number is specified by x. The search condition must be set to FDBITS, and the CAN standard must be FDISO or FDNONISO.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:FD:BRSBit? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:FD:BRSBit? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:FD:BRSBit value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:FD:BRSBit {ONE|ZERo|NOCARE}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:FD:BRSBit?

Info

ONE filters CAN FD packets to only match those where the BRS bit has a value of 1 (fast data enabled).
ZERo filters CAN FD packets to only match those where the BRS bit has a value of 0 (fast data disabled).
NOCARE disables filtering of CAN FD packets on the BRS bit.

SearchSearchItemTriggerABusCanFdEsibit ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:FD:ESIBit command.

Description

This command sets or queries the value of the error state indicator bit (ESI bit) for a CAN bus to search on. The search number is specified by x. The search condition must be set to FDBITS, and the CAN standard must be FDISO or FDNONISO.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:FD:ESIBit? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:FD:ESIBit? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:FD:ESIBit value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:FD:ESIBit {ONE|ZERo|NOCARE}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:FD:ESIBit?

Info

ONE filters CAN FD packets to only match those where the ESI bit has a value of 1 (recessive).
ZERo filters CAN FD packets to only match those where the ESI bit has a value of 0 (dominant).
NOCARE disables filtering of CAN FD packets on the ESI bit.

SearchSearchItemTriggerABusCanFrametype ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:FRAMEtype command.

Description

This command sets or queries CAN bus trigger frame type to be used when searching on a CAN bus signal. The search condition must be set to FRAMEtype. The search number is specified by x.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:FRAMEtype? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:FRAMEtype? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:FRAMEtype value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:FRAMEtype {DATa|ERRor|OVERLoad|REMote}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:FRAMEtype?

Info

DATa sets the frame type to data.
ERRor sets the frame type to error.
OVERLoad sets the frame type to overload.
REMote sets the frame type to remote.

SearchSearchItemTriggerABusCanIdentifier ¶

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:IDentifier command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:IDentifier? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:IDentifier? query and raise an AssertionError if the returned value does not match value.

Properties

.mode: The SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:IDentifier:MODe command.
.value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:IDentifier:VALue command.

mode `property` ¶

mode: SearchSearchItemTriggerABusCanIdentifierMode

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:IDentifier:MODe command.

Description

This command sets or queries the CAN bus trigger identifier (address) mode to be used when searching on a CAN bus signal. The search number is specified by x. The search condition must be set to IDANDDATA or DATA.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:IDentifier:MODe? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:IDentifier:MODe? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:IDentifier:MODe value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:IDentifier:MODe {EXTENDed|STandard}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:IDentifier:MODe?

Info

EXTENDed specifies the extended identifier mode.
STandard specifies the standard identifier mode.

value `property` ¶

value: SearchSearchItemTriggerABusCanIdentifierValue

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:IDentifier:VALue command.

Description

This command sets or queries CAN bus trigger identifier (address) value to be used when searching on a CAN bus signal. The search number is specified by x. The search condition must be set to IDANDDATA or DATA.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:IDentifier:VALue? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:IDentifier:VALue? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:IDentifier:VALue value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:IDentifier:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:IDentifier:VALue?

Info

<QString> is the identifier value.

SearchSearchItemTriggerABusCanIdentifierMode ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:IDentifier:MODe command.

Description

This command sets or queries the CAN bus trigger identifier (address) mode to be used when searching on a CAN bus signal. The search number is specified by x. The search condition must be set to IDANDDATA or DATA.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:IDentifier:MODe? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:IDentifier:MODe? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:IDentifier:MODe value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:IDentifier:MODe {EXTENDed|STandard}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:IDentifier:MODe?

Info

EXTENDed specifies the extended identifier mode.
STandard specifies the standard identifier mode.

SearchSearchItemTriggerABusCanIdentifierValue ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:IDentifier:VALue command.

Description

This command sets or queries CAN bus trigger identifier (address) value to be used when searching on a CAN bus signal. The search number is specified by x. The search condition must be set to IDANDDATA or DATA.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:IDentifier:VALue? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:IDentifier:VALue? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:IDentifier:VALue value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:IDentifier:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:IDentifier:VALue?

Info

<QString> is the identifier value.

SearchSearchItemTriggerABusI2c ¶

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C? query and raise an AssertionError if the returned value does not match value.

Properties

.address: The SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:ADDRess command tree.
.condition: The SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:CONDition command.
.data: The SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:DATa command tree.

address `property` ¶

address: SearchSearchItemTriggerABusI2cAddress

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:ADDRess command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:ADDRess? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:ADDRess? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.mode: The SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:ADDRess:MODe command.
.value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:ADDRess:VALue command.

condition `property` ¶

condition: SearchSearchItemTriggerABusI2cCondition

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:CONDition command.

Description

This command sets or queries the search condition for an I2C bus. The search number is specified by x.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:CONDition? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:CONDition? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:CONDition value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:CONDition {ADDRess|ADDRANDDATA|DATa|ACKMISS|REPEATstart|STARt|STOP}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:CONDition?

Info

ADDress specifies the trigger condition as Address.
ADDRANDDATA specifies the trigger condition as Address and Data.
DATa specifies the trigger condition as Data.
ACKMISS specifies the trigger condition as Missing of Acknowledgement.
REPEATstart specifies the trigger condition as Repeat of Start.
STARt specifies the trigger condition as Start.
STOP specifies the trigger condition as Stop.

data `property` ¶

data: SearchSearchItemTriggerABusI2cData

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:DATa command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:DATa? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:DATa? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.direction: The SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:DATa:DIRection command.
.size: The SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:DATa:SIZe command.
.value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:DATa:VALue command.

SearchSearchItemTriggerABusI2cAddress ¶

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:ADDRess command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:ADDRess? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:ADDRess? query and raise an AssertionError if the returned value does not match value.

Properties

.mode: The SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:ADDRess:MODe command.
.value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:ADDRess:VALue command.

mode `property` ¶

mode: SearchSearchItemTriggerABusI2cAddressMode

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:ADDRess:MODe command.

Description

This command sets or queries the I2C address mode for the specified bus search to determine where to place a mark. The search number is specified by x.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:ADDRess:MODe? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:ADDRess:MODe? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:ADDRess:MODe value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:ADDRess:MODe {ADDR10|ADDR7}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:ADDRess:MODe?

Info

ADDR10 specifies the address mode as ADDR10.
ADDR7 specifies the address mode as ADDR7.

value `property` ¶

value: SearchSearchItemTriggerABusI2cAddressValue

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:ADDRess:VALue command.

Description

This command sets or queries the binary address string used for the I2C search the specified search condition is Address or AddressData. The search number is specified by x.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:ADDRess:VALue? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:ADDRess:VALue? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:ADDRess:VALue value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:ADDRess:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:ADDRess:VALue?

Info

<QString> specifies the address value. This is either a 7-bit or 10-bit value depending on the address mode. The valid characters are 0-9, A-F, and X for addresses in hexadecimal format; and 0, 1, and X otherwise.

SearchSearchItemTriggerABusI2cAddressMode ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:ADDRess:MODe command.

Description

This command sets or queries the I2C address mode for the specified bus search to determine where to place a mark. The search number is specified by x.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:ADDRess:MODe? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:ADDRess:MODe? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:ADDRess:MODe value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:ADDRess:MODe {ADDR10|ADDR7}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:ADDRess:MODe?

Info

ADDR10 specifies the address mode as ADDR10.
ADDR7 specifies the address mode as ADDR7.

SearchSearchItemTriggerABusI2cAddressValue ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:ADDRess:VALue command.

Description

This command sets or queries the binary address string used for the I2C search the specified search condition is Address or AddressData. The search number is specified by x.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:ADDRess:VALue? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:ADDRess:VALue? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:ADDRess:VALue value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:ADDRess:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:ADDRess:VALue?

Info

<QString> specifies the address value. This is either a 7-bit or 10-bit value depending on the address mode. The valid characters are 0-9, A-F, and X for addresses in hexadecimal format; and 0, 1, and X otherwise.

SearchSearchItemTriggerABusI2cCondition ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:CONDition command.

Description

This command sets or queries the search condition for an I2C bus. The search number is specified by x.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:CONDition? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:CONDition? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:CONDition value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:CONDition {ADDRess|ADDRANDDATA|DATa|ACKMISS|REPEATstart|STARt|STOP}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:CONDition?

Info

ADDress specifies the trigger condition as Address.
ADDRANDDATA specifies the trigger condition as Address and Data.
DATa specifies the trigger condition as Data.
ACKMISS specifies the trigger condition as Missing of Acknowledgement.
REPEATstart specifies the trigger condition as Repeat of Start.
STARt specifies the trigger condition as Start.
STOP specifies the trigger condition as Stop.

SearchSearchItemTriggerABusI2cData ¶

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:DATa command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:DATa? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:DATa? query and raise an AssertionError if the returned value does not match value.

Properties

.direction: The SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:DATa:DIRection command.
.size: The SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:DATa:SIZe command.
.value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:DATa:VALue command.

direction `property` ¶

direction: SearchSearchItemTriggerABusI2cDataDirection

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:DATa:DIRection command.

Description

This command sets or queries the direction of the data for the I2C bus search to determine where to place a mark. The search number is specified by x. Read or write is indicated by the R/W bit in the I2C protocol.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:DATa:DIRection? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:DATa:DIRection? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:DATa:DIRection value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:DATa:DIRection {NOCARE|READ|WRITE}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:DATa:DIRection?

Info

NOCARE specifies the direction of data as Don’t Care.
READ specifies the direction of data as Read.
WRITE specifies the direction of data as Write.

size `property` ¶

size: SearchSearchItemTriggerABusI2cDataSize

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:DATa:SIZe command.

Description

This command sets or queries the length of the data string in bytes used for an I2C bus search to determine where to place a mark. The search number is specified by x. The search condition must be DATA or ADDRANDDATA.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:DATa:SIZe? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:DATa:SIZe? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:DATa:SIZe value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:DATa:SIZe <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:DATa:SIZe?

Info

<NR1> specifies the data size in bytes.

value `property` ¶

value: SearchSearchItemTriggerABusI2cDataValue

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:DATa:VALue command.

Description

This command sets or queries the binary data string used for I2C bus search to determine where to place a mark. The search number is specified by x. The search condition must be DATA or ADDRANDDATA.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:DATa:VALue? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:DATa:VALue? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:DATa:VALue value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:DATa:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:DATa:VALue?

Info

<QString> specifies the data value. The valid characters are 0, 1, or X for binary format; and A-F, 0-9, and X for hexadecimal format.

SearchSearchItemTriggerABusI2cDataDirection ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:DATa:DIRection command.

Description

This command sets or queries the direction of the data for the I2C bus search to determine where to place a mark. The search number is specified by x. Read or write is indicated by the R/W bit in the I2C protocol.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:DATa:DIRection? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:DATa:DIRection? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:DATa:DIRection value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:DATa:DIRection {NOCARE|READ|WRITE}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:DATa:DIRection?

Info

NOCARE specifies the direction of data as Don’t Care.
READ specifies the direction of data as Read.
WRITE specifies the direction of data as Write.

SearchSearchItemTriggerABusI2cDataSize ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:DATa:SIZe command.

Description

This command sets or queries the length of the data string in bytes used for an I2C bus search to determine where to place a mark. The search number is specified by x. The search condition must be DATA or ADDRANDDATA.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:DATa:SIZe? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:DATa:SIZe? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:DATa:SIZe value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:DATa:SIZe <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:DATa:SIZe?

Info

<NR1> specifies the data size in bytes.

SearchSearchItemTriggerABusI2cDataValue ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:DATa:VALue command.

Description

This command sets or queries the binary data string used for I2C bus search to determine where to place a mark. The search number is specified by x. The search condition must be DATA or ADDRANDDATA.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:DATa:VALue? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:DATa:VALue? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:DATa:VALue value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:DATa:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:DATa:VALue?

Info

<QString> specifies the data value. The valid characters are 0, 1, or X for binary format; and A-F, 0-9, and X for hexadecimal format.

SearchSearchItemTriggerABusLin ¶

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN? query and raise an AssertionError if the returned value does not match value.

Properties

.condition: The SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:CONDition command.
.data: The SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa command tree.
.errtype: The SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:ERRTYPE command.
.identifier: The SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:IDentifier command tree.

condition `property` ¶

condition: SearchSearchItemTriggerABusLinCondition

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:CONDition command.

Description

This command sets or queries the condition for a LIN bus search. The search number is specified by x.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:CONDition? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:CONDition? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:CONDition value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:CONDition {DATA|IDANDDATA|ERRor|IDentifier|SLEEP|SYNCfield|WAKEup}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:CONDition?

Info

DATA sets the trigger condition to data.
IDANDDATA sets the trigger condition to ID and data.
ERRor sets the trigger condition to error.
IDentifier sets the trigger condition to identifier.
SLEEP sets the trigger condition to sleep.
SYNCfield sets the trigger condition to sync field.
WAKEup sets the trigger condition to wakeup.

data `property` ¶

data: SearchSearchItemTriggerABusLinData

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.hivalue: The SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa:HIVALue command.
.qualifier: The SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa:QUALifier command.
.size: The SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa:SIZe command.
.value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa:VALue command.

errtype `property` ¶

errtype: SearchSearchItemTriggerABusLinErrtype

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:ERRTYPE command.

Description

This command sets or queries the error type for a LIN bus search. The search number is specified by x. The search condition must be set to ERROR.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:ERRTYPE? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:ERRTYPE? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:ERRTYPE value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:ERRTYPE {CHecksum|PARity|SYNC}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:ERRTYPE?

Info

CHecksum specifies the error type is checksum.
PARity specifies the error type is parity.
SYNC specifies the error type is sync.

identifier `property` ¶

identifier: SearchSearchItemTriggerABusLinIdentifier

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:IDentifier command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:IDentifier? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:IDentifier? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:IDentifier:VALue command.

SearchSearchItemTriggerABusLinCondition ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:CONDition command.

Description

This command sets or queries the condition for a LIN bus search. The search number is specified by x.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:CONDition? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:CONDition? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:CONDition value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:CONDition {DATA|IDANDDATA|ERRor|IDentifier|SLEEP|SYNCfield|WAKEup}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:CONDition?

Info

DATA sets the trigger condition to data.
IDANDDATA sets the trigger condition to ID and data.
ERRor sets the trigger condition to error.
IDentifier sets the trigger condition to identifier.
SLEEP sets the trigger condition to sleep.
SYNCfield sets the trigger condition to sync field.
WAKEup sets the trigger condition to wakeup.

SearchSearchItemTriggerABusLinData ¶

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa? query and raise an AssertionError if the returned value does not match value.

Properties

.hivalue: The SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa:HIVALue command.
.qualifier: The SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa:QUALifier command.
.size: The SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa:SIZe command.
.value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa:VALue command.

hivalue `property` ¶

hivalue: SearchSearchItemTriggerABusLinDataHivalue

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa:HIVALue command.

Description

This command sets or queries the high data value string used in a LIN bus search. The search number is specified by x. The search condition must be DATA or IDANDDATA and the data qualifier must be INRANGE or OUTRANGE.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa:HIVALue? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa:HIVALue? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa:HIVALue value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa:HIVALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa:HIVALue?

Info

<QString> is a quoted string of 1s, 0s, or Xs representing the binary data string to be used in a LIN search if the search condition is IDentifier or IDANDDATA (identifier and data).

qualifier `property` ¶

qualifier: SearchSearchItemTriggerABusLinDataQualifier

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa:QUALifier command.

Description

This command sets or queries the data qualifier used in a LIN bus search. The search number is specified by x.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa:QUALifier? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa:QUALifier? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa:QUALifier value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa:QUALifier {EQual|LESSEQual|MOREEQual|UNEQual|LESSthan|MOREthan|INrange|OUTrange}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa:QUALifier?

Info

EQual sets the data qualifier to equal.
LESSEQual sets the data qualifier to less equal.
MOREEQual sets the data qualifier to more equal.
UNEQual sets the data qualifier to unequal.
LESSthan sets the data qualifier to less than.
MOREthan sets the data qualifier to more than.
INrange sets the data qualifier to in range.
OUTrange sets the data qualifier out of range.

size `property` ¶

size: SearchSearchItemTriggerABusLinDataSize

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa:SIZe command.

Description

This command sets or queries the length of the stat string in bytes used for a LIN bus search. The search number is specified by x.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa:SIZe? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa:SIZe? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa:SIZe value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa:SIZe <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa:SIZe?

Info

<NR1> specifies the data size.

value `property` ¶

value: SearchSearchItemTriggerABusLinDataValue

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa:VALue command.

Description

This command sets or queries the data string used for a LIN bus search. The search number is specified by x. The search condition must be DATA or IDANDDATA.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa:VALue? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa:VALue? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa:VALue value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa:VALue?

Info

<QString> specifies the data value.

SearchSearchItemTriggerABusLinDataHivalue ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa:HIVALue command.

Description

This command sets or queries the high data value string used in a LIN bus search. The search number is specified by x. The search condition must be DATA or IDANDDATA and the data qualifier must be INRANGE or OUTRANGE.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa:HIVALue? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa:HIVALue? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa:HIVALue value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa:HIVALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa:HIVALue?

Info

<QString> is a quoted string of 1s, 0s, or Xs representing the binary data string to be used in a LIN search if the search condition is IDentifier or IDANDDATA (identifier and data).

SearchSearchItemTriggerABusLinDataQualifier ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa:QUALifier command.

Description

This command sets or queries the data qualifier used in a LIN bus search. The search number is specified by x.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa:QUALifier? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa:QUALifier? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa:QUALifier value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa:QUALifier {EQual|LESSEQual|MOREEQual|UNEQual|LESSthan|MOREthan|INrange|OUTrange}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa:QUALifier?

Info

EQual sets the data qualifier to equal.
LESSEQual sets the data qualifier to less equal.
MOREEQual sets the data qualifier to more equal.
UNEQual sets the data qualifier to unequal.
LESSthan sets the data qualifier to less than.
MOREthan sets the data qualifier to more than.
INrange sets the data qualifier to in range.
OUTrange sets the data qualifier out of range.

SearchSearchItemTriggerABusLinDataSize ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa:SIZe command.

Description

This command sets or queries the length of the stat string in bytes used for a LIN bus search. The search number is specified by x.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa:SIZe? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa:SIZe? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa:SIZe value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa:SIZe <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa:SIZe?

Info

<NR1> specifies the data size.

SearchSearchItemTriggerABusLinDataValue ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa:VALue command.

Description

This command sets or queries the data string used for a LIN bus search. The search number is specified by x. The search condition must be DATA or IDANDDATA.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa:VALue? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa:VALue? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa:VALue value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa:VALue?

Info

<QString> specifies the data value.

SearchSearchItemTriggerABusLinErrtype ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:ERRTYPE command.

Description

This command sets or queries the error type for a LIN bus search. The search number is specified by x. The search condition must be set to ERROR.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:ERRTYPE? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:ERRTYPE? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:ERRTYPE value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:ERRTYPE {CHecksum|PARity|SYNC}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:ERRTYPE?

Info

CHecksum specifies the error type is checksum.
PARity specifies the error type is parity.
SYNC specifies the error type is sync.

SearchSearchItemTriggerABusLinIdentifier ¶

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:IDentifier command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:IDentifier? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:IDentifier? query and raise an AssertionError if the returned value does not match value.

Properties

.value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:IDentifier:VALue command.

value `property` ¶

value: SearchSearchItemTriggerABusLinIdentifierValue

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:IDentifier:VALue command.

Description

This command sets or queries the string used for a LIN bus identifier value. The search number is specified by x. The search condition must be IDENTIFIER or IDANDDATA.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:IDentifier:VALue? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:IDentifier:VALue? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:IDentifier:VALue value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:IDentifier:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:IDentifier:VALue?

Info

<QString> specifies the identifier value.

SearchSearchItemTriggerABusLinIdentifierValue ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:IDentifier:VALue command.

Description

This command sets or queries the string used for a LIN bus identifier value. The search number is specified by x. The search condition must be IDENTIFIER or IDANDDATA.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:IDentifier:VALue? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:IDentifier:VALue? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:IDentifier:VALue value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:IDentifier:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:IDentifier:VALue?

Info

<QString> specifies the identifier value.

SearchSearchItemTriggerABusParallel ¶

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:PARallel command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PARallel? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PARallel? query and raise an AssertionError if the returned value does not match value.

Properties

.data: The SEARCH:SEARCH<x>:TRIGger:A:BUS:PARallel:DATa command tree.

data `property` ¶

data: SearchSearchItemTriggerABusParallelData

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:PARallel:DATa command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PARallel:DATa? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PARallel:DATa? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:PARallel:DATa:VALue command.

SearchSearchItemTriggerABusParallelData ¶

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:PARallel:DATa command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PARallel:DATa? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PARallel:DATa? query and raise an AssertionError if the returned value does not match value.

Properties

.value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:PARallel:DATa:VALue command.

value `property` ¶

value: SearchSearchItemTriggerABusParallelDataValue

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:PARallel:DATa:VALue command.

Description

This command sets or queries the binary data string used for a parallel bus search to determine where to place a mark. The search number is specified by x.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PARallel:DATa:VALue? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PARallel:DATa:VALue? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PARallel:DATa:VALue value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:PARallel:DATa:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PARallel:DATa:VALue?

Info

<QString> specifies the data value in a valid format. Valid characters are 0-9.

SearchSearchItemTriggerABusParallelDataValue ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:PARallel:DATa:VALue command.

Description

This command sets or queries the binary data string used for a parallel bus search to determine where to place a mark. The search number is specified by x.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PARallel:DATa:VALue? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PARallel:DATa:VALue? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PARallel:DATa:VALue value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:PARallel:DATa:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PARallel:DATa:VALue?

Info

<QString> specifies the data value in a valid format. Valid characters are 0-9.

SearchSearchItemTriggerABusRs232c ¶

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:RS232C command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:RS232C? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:RS232C? query and raise an AssertionError if the returned value does not match value.

Properties

.condition: The SEARCH:SEARCH<x>:TRIGger:A:BUS:RS232C:CONDition command.
.data: The SEARCH:SEARCH<x>:TRIGger:A:BUS:RS232C:DATa command tree.

condition `property` ¶

condition: SearchSearchItemTriggerABusRs232cCondition

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:RS232C:CONDition command.

Description

This command sets or queries the condition for an RS232C bus search to determine where to place a mark. The search number is specified by x.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:RS232C:CONDition? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:RS232C:CONDition? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:RS232C:CONDition value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:RS232C:CONDition {DATa|EOp|PARItyerror|STARt}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:RS232C:CONDition?

Info

DATa specifies the search condition as Data.
EOp specifies the search condition as End of Packet.
PARItyerror specifies the search condition as Parity Error.
STARt specifies the search condition as Start.

data `property` ¶

data: SearchSearchItemTriggerABusRs232cData

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:RS232C:DATa command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:RS232C:DATa? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:RS232C:DATa? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.size: The SEARCH:SEARCH<x>:TRIGger:A:BUS:RS232C:DATa:SIZe command.
.value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:RS232C:DATa:VALue command.

SearchSearchItemTriggerABusRs232cCondition ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:RS232C:CONDition command.

Description

This command sets or queries the condition for an RS232C bus search to determine where to place a mark. The search number is specified by x.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:RS232C:CONDition? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:RS232C:CONDition? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:RS232C:CONDition value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:RS232C:CONDition {DATa|EOp|PARItyerror|STARt}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:RS232C:CONDition?

Info

DATa specifies the search condition as Data.
EOp specifies the search condition as End of Packet.
PARItyerror specifies the search condition as Parity Error.
STARt specifies the search condition as Start.

SearchSearchItemTriggerABusRs232cData ¶

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:RS232C:DATa command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:RS232C:DATa? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:RS232C:DATa? query and raise an AssertionError if the returned value does not match value.

Properties

.size: The SEARCH:SEARCH<x>:TRIGger:A:BUS:RS232C:DATa:SIZe command.
.value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:RS232C:DATa:VALue command.

size `property` ¶

size: SearchSearchItemTriggerABusRs232cDataSize

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:RS232C:DATa:SIZe command.

Description

This command sets or queries the length of the data string in bytes to be used for an RS232 bus search to determine where to place a mark when the search condition is Data. The search number is specified by x.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:RS232C:DATa:SIZe? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:RS232C:DATa:SIZe? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:RS232C:DATa:SIZe value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:RS232C:DATa:SIZe <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:RS232C:DATa:SIZe?

Info

<NR3> is the number of bits per word in the data string, from 1 to 8.

value `property` ¶

value: SearchSearchItemTriggerABusRs232cDataValue

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:RS232C:DATa:VALue command.

Description

This command sets or queries the data string used for the specified RS232C bus trigger search to determine where to place a mark. The search condition must be Data. The search number is specified by x.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:RS232C:DATa:VALue? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:RS232C:DATa:VALue? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:RS232C:DATa:VALue value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:RS232C:DATa:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:RS232C:DATa:VALue?

Info

<QString> specifies the value of the data string. The valid characters are 0, 1, and X for values in binary format; and A-F, 0-9, and X for values in hexadecimal format.

SearchSearchItemTriggerABusRs232cDataSize ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:RS232C:DATa:SIZe command.

Description

This command sets or queries the length of the data string in bytes to be used for an RS232 bus search to determine where to place a mark when the search condition is Data. The search number is specified by x.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:RS232C:DATa:SIZe? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:RS232C:DATa:SIZe? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:RS232C:DATa:SIZe value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:RS232C:DATa:SIZe <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:RS232C:DATa:SIZe?

Info

<NR3> is the number of bits per word in the data string, from 1 to 8.

SearchSearchItemTriggerABusRs232cDataValue ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:RS232C:DATa:VALue command.

Description

This command sets or queries the data string used for the specified RS232C bus trigger search to determine where to place a mark. The search condition must be Data. The search number is specified by x.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:RS232C:DATa:VALue? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:RS232C:DATa:VALue? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:RS232C:DATa:VALue value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:RS232C:DATa:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:RS232C:DATa:VALue?

Info

<QString> specifies the value of the data string. The valid characters are 0, 1, and X for values in binary format; and A-F, 0-9, and X for values in hexadecimal format.

SearchSearchItemTriggerABusSent ¶

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT? query and raise an AssertionError if the returned value does not match value.

Properties

.condition: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:CONDition command.
.errtype: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:ERRType command.
.fast: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST command tree.
.pause: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:PAUSE command tree.
.slow: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:SLOW command tree.

condition `property` ¶

condition: SearchSearchItemTriggerABusSentCondition

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:CONDition command.

Description

This command sets or queries the search condition for a SENT bus.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:CONDition? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:CONDition? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:CONDition value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:CONDition {START|FAST|SLOW|PAUSE|ERRor}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:CONDition?

Info

Search<x> is the number of the search.
START specifies searching for start of packet.
FAST specifies searching for fast channel data.
SLOW specifies searching for slow channel data.
PAUSE specifies searching for pause pulses.
ERRor specifies searching on errors.

errtype `property` ¶

errtype: SearchSearchItemTriggerABusSentErrtype

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:ERRType command.

Description

This command sets or queries the error type to be used when searching on SENT data.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:ERRType? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:ERRType? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:ERRType value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:ERRType {FRAMELENgth|CRC}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:ERRType?

Info

Search<x> is the number of the search.
FRAMELENgth specifies searching for SENT frame length errors.
CRC specifies searching for CRC errors.

Sub-properties

.crc: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:ERRType:CRC command.

fast `property` ¶

fast: SearchSearchItemTriggerABusSentFast

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.chan1a: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN1A command tree.
.chan2b: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN2B command tree.
.counter: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:COUNTer command tree.
.invertnibble: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:INVERTNIBble command tree.
.status: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:STATus command tree.

pause `property` ¶

pause: SearchSearchItemTriggerABusSentPause

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:PAUSE command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:PAUSE? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:PAUSE? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.qualifier: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:PAUSE:QUALifier command.
.ticks: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:PAUSE:TICKs command tree.

slow `property` ¶

slow: SearchSearchItemTriggerABusSentSlow

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:SLOW command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:SLOW? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:SLOW? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.data: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:SLOW:DATA command tree.
.identifier: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:SLOW:IDentifier command tree.

SearchSearchItemTriggerABusSentCondition ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:CONDition command.

Description

This command sets or queries the search condition for a SENT bus.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:CONDition? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:CONDition? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:CONDition value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:CONDition {START|FAST|SLOW|PAUSE|ERRor}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:CONDition?

Info

Search<x> is the number of the search.
START specifies searching for start of packet.
FAST specifies searching for fast channel data.
SLOW specifies searching for slow channel data.
PAUSE specifies searching for pause pulses.
ERRor specifies searching on errors.

SearchSearchItemTriggerABusSentErrtype ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:ERRType command.

Description

This command sets or queries the error type to be used when searching on SENT data.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:ERRType? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:ERRType? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:ERRType value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:ERRType {FRAMELENgth|CRC}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:ERRType?

Info

Search<x> is the number of the search.
FRAMELENgth specifies searching for SENT frame length errors.
CRC specifies searching for CRC errors.

Properties

.crc: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:ERRType:CRC command.

crc `property` ¶

crc: SearchSearchItemTriggerABusSentErrtypeCrc

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:ERRType:CRC command.

Description

This command sets or queries the CRC error type to be used when searching on SENT data.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:ERRType:CRC? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:ERRType:CRC? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:ERRType:CRC value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:ERRType:CRC {FAST|SLOW}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:ERRType:CRC?

Info

Search<x> is the number of the search.
FAST specifies searching for CRC errors only in the fast channel.
SLOW specifies searching for CRC errors only in the slow channel.

SearchSearchItemTriggerABusSentErrtypeCrc ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:ERRType:CRC command.

Description

This command sets or queries the CRC error type to be used when searching on SENT data.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:ERRType:CRC? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:ERRType:CRC? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:ERRType:CRC value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:ERRType:CRC {FAST|SLOW}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:ERRType:CRC?

Info

Search<x> is the number of the search.
FAST specifies searching for CRC errors only in the fast channel.
SLOW specifies searching for CRC errors only in the slow channel.

SearchSearchItemTriggerABusSentFast ¶

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST? query and raise an AssertionError if the returned value does not match value.

Properties

.chan1a: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN1A command tree.
.chan2b: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN2B command tree.
.counter: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:COUNTer command tree.
.invertnibble: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:INVERTNIBble command tree.
.status: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:STATus command tree.

chan1a `property` ¶

chan1a: SearchSearchItemTriggerABusSentFastChan1a

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN1A command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN1A? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN1A? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.hivalue: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN1A:HIVALue command.
.qualifier: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN1A:QUALifier command.
.value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN1A:VALue command.

chan2b `property` ¶

chan2b: SearchSearchItemTriggerABusSentFastChan2b

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN2B command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN2B? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN2B? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.hivalue: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN2B:HIVALue command.
.qualifier: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN2B:QUALifier command.
.value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN2B:VALue command.

counter `property` ¶

counter: SearchSearchItemTriggerABusSentFastCounter

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:COUNTer command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:COUNTer? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:COUNTer? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.hivalue: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:COUNTer:HIVALue command.
.qualifier: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:COUNTer:QUALifier command.
.value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:COUNTer:VALue command.

invertnibble `property` ¶

invertnibble: SearchSearchItemTriggerABusSentFastInvertnibble

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:INVERTNIBble command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:INVERTNIBble? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:INVERTNIBble? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:INVERTNIBble:VALue command.

status `property` ¶

status: SearchSearchItemTriggerABusSentFastStatus

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:STATus command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:STATus? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:STATus? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:STATus:VALue command.

SearchSearchItemTriggerABusSentFastChan1a ¶

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN1A command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN1A? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN1A? query and raise an AssertionError if the returned value does not match value.

Properties

.hivalue: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN1A:HIVALue command.
.qualifier: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN1A:QUALifier command.
.value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN1A:VALue command.

hivalue `property` ¶

hivalue: SearchSearchItemTriggerABusSentFastChan1aHivalue

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN1A:HIVALue command.

Description

This command sets or queries the high binary fast channel 1 value to use when searching on a SENT bus signal.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN1A:HIVALue? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN1A:HIVALue? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN1A:HIVALue value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN1A:HIVALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN1A:HIVALue?

Info

Search<x> is the Search identifier number.
<Qstring> sets the Fast Channel 1 binary data high value.

qualifier `property` ¶

qualifier: SearchSearchItemTriggerABusSentFastChan1aQualifier

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN1A:QUALifier command.

Description

This command sets or queries the qualifier to be used when searching on SENT fast packet bus data for device channel 1.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN1A:QUALifier? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN1A:QUALifier? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN1A:QUALifier value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN1A:QUALifier {EQual|UNEQual|LESSthan|MOREthan|LESSEQual|MOREEQual|INrange|OUTrange}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN1A:QUALifier?

Info

Search<x> is the number of the search.
EQUal specifies the qualifier as Equal.
LESSEQual specifies the qualifier as Less Than or Equal to.
LESSThan specifies the qualifier as Less Than.
MOREEQual specifies the qualifier as More Than or Equal to.
MOREThan specifies the qualifier as More Than.
UNEQual specifies the qualifier as Unequal.
INrange sets the qualifier to inside a range.
OUTrange sets the qualifier to outside a range.

value `property` ¶

value: SearchSearchItemTriggerABusSentFastChan1aValue

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN1A:VALue command.

Description

This command sets or queries the binary fast channel 1 value to be used when searching on a SENT bus signal.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN1A:VALue? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN1A:VALue? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN1A:VALue value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN1A:VALue <Qstring>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN1A:VALue?

Info

Search<x> is the number of the search.
<Qstring> is the Fast Channel 1 binary value.

SearchSearchItemTriggerABusSentFastChan1aHivalue ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN1A:HIVALue command.

Description

This command sets or queries the high binary fast channel 1 value to use when searching on a SENT bus signal.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN1A:HIVALue? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN1A:HIVALue? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN1A:HIVALue value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN1A:HIVALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN1A:HIVALue?

Info

Search<x> is the Search identifier number.
<Qstring> sets the Fast Channel 1 binary data high value.

SearchSearchItemTriggerABusSentFastChan1aQualifier ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN1A:QUALifier command.

Description

This command sets or queries the qualifier to be used when searching on SENT fast packet bus data for device channel 1.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN1A:QUALifier? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN1A:QUALifier? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN1A:QUALifier value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN1A:QUALifier {EQual|UNEQual|LESSthan|MOREthan|LESSEQual|MOREEQual|INrange|OUTrange}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN1A:QUALifier?

Info

Search<x> is the number of the search.
EQUal specifies the qualifier as Equal.
LESSEQual specifies the qualifier as Less Than or Equal to.
LESSThan specifies the qualifier as Less Than.
MOREEQual specifies the qualifier as More Than or Equal to.
MOREThan specifies the qualifier as More Than.
UNEQual specifies the qualifier as Unequal.
INrange sets the qualifier to inside a range.
OUTrange sets the qualifier to outside a range.

SearchSearchItemTriggerABusSentFastChan1aValue ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN1A:VALue command.

Description

This command sets or queries the binary fast channel 1 value to be used when searching on a SENT bus signal.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN1A:VALue? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN1A:VALue? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN1A:VALue value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN1A:VALue <Qstring>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN1A:VALue?

Info

Search<x> is the number of the search.
<Qstring> is the Fast Channel 1 binary value.

SearchSearchItemTriggerABusSentFastChan2b ¶

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN2B command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN2B? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN2B? query and raise an AssertionError if the returned value does not match value.

Properties

.hivalue: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN2B:HIVALue command.
.qualifier: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN2B:QUALifier command.
.value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN2B:VALue command.

hivalue `property` ¶

hivalue: SearchSearchItemTriggerABusSentFastChan2bHivalue

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN2B:HIVALue command.

Description

This command sets or queries the high binary fast channel 2 value to use when searching on a SENT bus signal.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN2B:HIVALue? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN2B:HIVALue? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN2B:HIVALue value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN2B:HIVALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN2B:HIVALue?

Info

Search<x> is the Search identifier number.
<Qstring> sets the Fast Channel 2 high binary data value.

qualifier `property` ¶

qualifier: SearchSearchItemTriggerABusSentFastChan2bQualifier

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN2B:QUALifier command.

Description

This command sets or queries the qualifier to be used when searching on SENT fast packet bus data for device channel 2.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN2B:QUALifier? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN2B:QUALifier? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN2B:QUALifier value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN2B:QUALifier {EQual|UNEQual|LESSthan|MOREthan|LESSEQual|MOREEQual|INrange|OUTrange}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN2B:QUALifier?

Info

Search<x> is the number of the search.
EQUal specifies the qualifier as Equal.
LESSEQual specifies the qualifier as Less Than or Equal to.
LESSThan specifies the qualifier as Less Than.
MOREEQual specifies the qualifier as More Than or Equal to.
MOREThan specifies the qualifier as More Than.
UNEQual specifies the qualifier as Unequal.
INrange sets the qualifier to inside a range.
OUTrange sets the qualifier to outside a range.

value `property` ¶

value: SearchSearchItemTriggerABusSentFastChan2bValue

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN2B:VALue command.

Description

This command sets or queries the binary fast channel 2 value to be used when searching on a SENT bus signal.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN2B:VALue? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN2B:VALue? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN2B:VALue value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN2B:VALue <Qstring>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN2B:VALue?

Info

Search<x> is the number of the search.
<Qstring> is the Fast Channel 2 binary value.

SearchSearchItemTriggerABusSentFastChan2bHivalue ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN2B:HIVALue command.

Description

This command sets or queries the high binary fast channel 2 value to use when searching on a SENT bus signal.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN2B:HIVALue? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN2B:HIVALue? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN2B:HIVALue value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN2B:HIVALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN2B:HIVALue?

Info

Search<x> is the Search identifier number.
<Qstring> sets the Fast Channel 2 high binary data value.

SearchSearchItemTriggerABusSentFastChan2bQualifier ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN2B:QUALifier command.

Description

This command sets or queries the qualifier to be used when searching on SENT fast packet bus data for device channel 2.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN2B:QUALifier? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN2B:QUALifier? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN2B:QUALifier value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN2B:QUALifier {EQual|UNEQual|LESSthan|MOREthan|LESSEQual|MOREEQual|INrange|OUTrange}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN2B:QUALifier?

Info

Search<x> is the number of the search.
EQUal specifies the qualifier as Equal.
LESSEQual specifies the qualifier as Less Than or Equal to.
LESSThan specifies the qualifier as Less Than.
MOREEQual specifies the qualifier as More Than or Equal to.
MOREThan specifies the qualifier as More Than.
UNEQual specifies the qualifier as Unequal.
INrange sets the qualifier to inside a range.
OUTrange sets the qualifier to outside a range.

SearchSearchItemTriggerABusSentFastChan2bValue ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN2B:VALue command.

Description

This command sets or queries the binary fast channel 2 value to be used when searching on a SENT bus signal.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN2B:VALue? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN2B:VALue? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN2B:VALue value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN2B:VALue <Qstring>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN2B:VALue?

Info

Search<x> is the number of the search.
<Qstring> is the Fast Channel 2 binary value.

SearchSearchItemTriggerABusSentFastCounter ¶

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:COUNTer command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:COUNTer? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:COUNTer? query and raise an AssertionError if the returned value does not match value.

Properties

.hivalue: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:COUNTer:HIVALue command.
.qualifier: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:COUNTer:QUALifier command.
.value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:COUNTer:VALue command.

hivalue `property` ¶

hivalue: SearchSearchItemTriggerABusSentFastCounterHivalue

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:COUNTer:HIVALue command.

Description

This command sets or queries the high binary fast message counter value to use when searching on a SENT bus signal.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:COUNTer:HIVALue? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:COUNTer:HIVALue? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:COUNTer:HIVALue value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:COUNTer:HIVALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:COUNTer:HIVALue?

Info

Search<x> is the Search identifier number.
<Qstring> sets the Fast Channel 1 counter binary value.

qualifier `property` ¶

qualifier: SearchSearchItemTriggerABusSentFastCounterQualifier

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:COUNTer:QUALifier command.

Description

This command sets or queries the qualifier to be used when searching on SENT fast packet bus data for the secure format counter.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:COUNTer:QUALifier? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:COUNTer:QUALifier? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:COUNTer:QUALifier value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:COUNTer:QUALifier {EQual|UNEQual|LESSthan|MOREthan|LESSEQual|MOREEQual|INrange|OUTrange}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:COUNTer:QUALifier?

Info

Search<x> is the number of the search.
EQUal specifies the qualifier as Equal.
LESSEQual specifies the qualifier as Less Than or Equal to.
LESSThan specifies the qualifier as Less Than.
MOREEQual specifies the qualifier as More Than or Equal to.
MOREThan specifies the qualifier as More Than.
UNEQual specifies the qualifier as Unequal.
INrange sets the qualifier to inside a range.
OUTrange sets the qualifier to outside a range.

value `property` ¶

value: SearchSearchItemTriggerABusSentFastCounterValue

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:COUNTer:VALue command.

Description

This command sets or queries the binary fast message counter value to be used when searching on a SENT bus signal.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:COUNTer:VALue? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:COUNTer:VALue? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:COUNTer:VALue value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:COUNTer:VALue <Qstring>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:COUNTer:VALue?

Info

Search<x> is the number of the search.
<Qstring> is the Fast Channel 1 counter value.

SearchSearchItemTriggerABusSentFastCounterHivalue ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:COUNTer:HIVALue command.

Description

This command sets or queries the high binary fast message counter value to use when searching on a SENT bus signal.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:COUNTer:HIVALue? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:COUNTer:HIVALue? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:COUNTer:HIVALue value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:COUNTer:HIVALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:COUNTer:HIVALue?

Info

Search<x> is the Search identifier number.
<Qstring> sets the Fast Channel 1 counter binary value.

SearchSearchItemTriggerABusSentFastCounterQualifier ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:COUNTer:QUALifier command.

Description

This command sets or queries the qualifier to be used when searching on SENT fast packet bus data for the secure format counter.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:COUNTer:QUALifier? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:COUNTer:QUALifier? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:COUNTer:QUALifier value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:COUNTer:QUALifier {EQual|UNEQual|LESSthan|MOREthan|LESSEQual|MOREEQual|INrange|OUTrange}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:COUNTer:QUALifier?

Info

Search<x> is the number of the search.
EQUal specifies the qualifier as Equal.
LESSEQual specifies the qualifier as Less Than or Equal to.
LESSThan specifies the qualifier as Less Than.
MOREEQual specifies the qualifier as More Than or Equal to.
MOREThan specifies the qualifier as More Than.
UNEQual specifies the qualifier as Unequal.
INrange sets the qualifier to inside a range.
OUTrange sets the qualifier to outside a range.

SearchSearchItemTriggerABusSentFastCounterValue ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:COUNTer:VALue command.

Description

This command sets or queries the binary fast message counter value to be used when searching on a SENT bus signal.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:COUNTer:VALue? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:COUNTer:VALue? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:COUNTer:VALue value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:COUNTer:VALue <Qstring>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:COUNTer:VALue?

Info

Search<x> is the number of the search.
<Qstring> is the Fast Channel 1 counter value.

SearchSearchItemTriggerABusSentFastInvertnibble ¶

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:INVERTNIBble command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:INVERTNIBble? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:INVERTNIBble? query and raise an AssertionError if the returned value does not match value.

Properties

.value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:INVERTNIBble:VALue command.

value `property` ¶

value: SearchSearchItemTriggerABusSentFastInvertnibbleValue

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:INVERTNIBble:VALue command.

Description

This command sets or queries the binary fast message inverted nibble value to be used when searching on a SENT bus signal.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:INVERTNIBble:VALue? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:INVERTNIBble:VALue? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:INVERTNIBble:VALue value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:INVERTNIBble:VALue <Qstring>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:INVERTNIBble:VALue?

Info

Search<x> is the number of the search.
<Qstring> is the fast message inverted nibble binary value.

SearchSearchItemTriggerABusSentFastInvertnibbleValue ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:INVERTNIBble:VALue command.

Description

This command sets or queries the binary fast message inverted nibble value to be used when searching on a SENT bus signal.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:INVERTNIBble:VALue? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:INVERTNIBble:VALue? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:INVERTNIBble:VALue value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:INVERTNIBble:VALue <Qstring>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:INVERTNIBble:VALue?

Info

Search<x> is the number of the search.
<Qstring> is the fast message inverted nibble binary value.

SearchSearchItemTriggerABusSentFastStatus ¶

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:STATus command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:STATus? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:STATus? query and raise an AssertionError if the returned value does not match value.

Properties

.value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:STATus:VALue command.

value `property` ¶

value: SearchSearchItemTriggerABusSentFastStatusValue

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:STATus:VALue command.

Description

This command sets or queries the binary status value to be used when searching on a SENT bus signal.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:STATus:VALue? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:STATus:VALue? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:STATus:VALue value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:STATus:VALue <Qstring>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:STATus:VALue?

Info

Search<x> is the number of the search.
<Qstring> is the binary status binary value.

SearchSearchItemTriggerABusSentFastStatusValue ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:STATus:VALue command.

Description

This command sets or queries the binary status value to be used when searching on a SENT bus signal.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:STATus:VALue? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:STATus:VALue? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:STATus:VALue value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:STATus:VALue <Qstring>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:STATus:VALue?

Info

Search<x> is the number of the search.
<Qstring> is the binary status binary value.

SearchSearchItemTriggerABusSentPause ¶

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:PAUSE command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:PAUSE? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:PAUSE? query and raise an AssertionError if the returned value does not match value.

Properties

.qualifier: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:PAUSE:QUALifier command.
.ticks: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:PAUSE:TICKs command tree.

qualifier `property` ¶

qualifier: SearchSearchItemTriggerABusSentPauseQualifier

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:PAUSE:QUALifier command.

Description

This command sets or queries the qualifier to be used when searching on SENT pause pulses.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:PAUSE:QUALifier? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:PAUSE:QUALifier? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:PAUSE:QUALifier value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:PAUSE:QUALifier {EQual|UNEQual|LESSthan|MOREthan|LESSEQual|MOREEQual|INrange|OUTrange}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:PAUSE:QUALifier?

Info

Search<x> is the number of the search.
EQUal specifies the qualifier as Equal.
INrange sets the qualifier to be within a range.
LESSEQual sets the qualifier as Less Than or Equal to.
LESSThan sets the qualifier as Less Than.
MOREEQual sets the qualifier as More Than or Equal to.
MOREThan sets the qualifier as More Than.
OUTrange sets the qualifier to be outside a range.
UNEQual specifies the qualifier as Unequal.

ticks `property` ¶

ticks: SearchSearchItemTriggerABusSentPauseTicks

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:PAUSE:TICKs command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:PAUSE:TICKs? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:PAUSE:TICKs? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.hivalue: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:PAUSE:TICKs:HIVALue command.
.value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:PAUSE:TICKs:VALue command.

SearchSearchItemTriggerABusSentPauseQualifier ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:PAUSE:QUALifier command.

Description

This command sets or queries the qualifier to be used when searching on SENT pause pulses.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:PAUSE:QUALifier? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:PAUSE:QUALifier? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:PAUSE:QUALifier value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:PAUSE:QUALifier {EQual|UNEQual|LESSthan|MOREthan|LESSEQual|MOREEQual|INrange|OUTrange}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:PAUSE:QUALifier?

Info

Search<x> is the number of the search.
EQUal specifies the qualifier as Equal.
INrange sets the qualifier to be within a range.
LESSEQual sets the qualifier as Less Than or Equal to.
LESSThan sets the qualifier as Less Than.
MOREEQual sets the qualifier as More Than or Equal to.
MOREThan sets the qualifier as More Than.
OUTrange sets the qualifier to be outside a range.
UNEQual specifies the qualifier as Unequal.

SearchSearchItemTriggerABusSentPauseTicks ¶

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:PAUSE:TICKs command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:PAUSE:TICKs? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:PAUSE:TICKs? query and raise an AssertionError if the returned value does not match value.

Properties

.hivalue: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:PAUSE:TICKs:HIVALue command.
.value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:PAUSE:TICKs:VALue command.

hivalue `property` ¶

hivalue: SearchSearchItemTriggerABusSentPauseTicksHivalue

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:PAUSE:TICKs:HIVALue command.

Description

This command sets or queries the maximum number of pause clock ticks to be used when searching on a SENT bus signal.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:PAUSE:TICKs:HIVALue? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:PAUSE:TICKs:HIVALue? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:PAUSE:TICKs:HIVALue value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:PAUSE:TICKs:HIVALue <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:PAUSE:TICKs:HIVALue?

Info

Search<x> is the number of the search.
<NR1> is the maximum number of pause clock ticks to be used when searching.

value `property` ¶

value: SearchSearchItemTriggerABusSentPauseTicksValue

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:PAUSE:TICKs:VALue command.

Description

This command sets or queries the minimum number of pause clock ticks to be used when searching on a SENT bus signal.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:PAUSE:TICKs:VALue? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:PAUSE:TICKs:VALue? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:PAUSE:TICKs:VALue value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:PAUSE:TICKs:VALue <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:PAUSE:TICKs:VALue?

Info

Search<x> is the number of the search.
<NR1> is the minimum number of pause clock ticks to be used when searching.

SearchSearchItemTriggerABusSentPauseTicksHivalue ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:PAUSE:TICKs:HIVALue command.

Description

This command sets or queries the maximum number of pause clock ticks to be used when searching on a SENT bus signal.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:PAUSE:TICKs:HIVALue? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:PAUSE:TICKs:HIVALue? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:PAUSE:TICKs:HIVALue value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:PAUSE:TICKs:HIVALue <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:PAUSE:TICKs:HIVALue?

Info

Search<x> is the number of the search.
<NR1> is the maximum number of pause clock ticks to be used when searching.

SearchSearchItemTriggerABusSentPauseTicksValue ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:PAUSE:TICKs:VALue command.

Description

This command sets or queries the minimum number of pause clock ticks to be used when searching on a SENT bus signal.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:PAUSE:TICKs:VALue? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:PAUSE:TICKs:VALue? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:PAUSE:TICKs:VALue value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:PAUSE:TICKs:VALue <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:PAUSE:TICKs:VALue?

Info

Search<x> is the number of the search.
<NR1> is the minimum number of pause clock ticks to be used when searching.

SearchSearchItemTriggerABusSentSlow ¶

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:SLOW command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:SLOW? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:SLOW? query and raise an AssertionError if the returned value does not match value.

Properties

.data: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:SLOW:DATA command tree.
.identifier: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:SLOW:IDentifier command tree.

data `property` ¶

data: SearchSearchItemTriggerABusSentSlowData

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:SLOW:DATA command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:SLOW:DATA? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:SLOW:DATA? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.hivalue: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:SLOW:DATA:HIVALue command.
.qualifier: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:SLOW:DATA:QUALifier command.
.value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:SLOW:DATA:VALue command.

identifier `property` ¶

identifier: SearchSearchItemTriggerABusSentSlowIdentifier

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:SLOW:IDentifier command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:SLOW:IDentifier? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:SLOW:IDentifier? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:SLOW:IDentifier:VALue command.

SearchSearchItemTriggerABusSentSlowData ¶

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:SLOW:DATA command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:SLOW:DATA? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:SLOW:DATA? query and raise an AssertionError if the returned value does not match value.

Properties

.hivalue: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:SLOW:DATA:HIVALue command.
.qualifier: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:SLOW:DATA:QUALifier command.
.value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:SLOW:DATA:VALue command.

hivalue `property` ¶

hivalue: SearchSearchItemTriggerABusSentSlowDataHivalue

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:SLOW:DATA:HIVALue command.

Description

This command sets or queries the high binary Slow channel data value to use when searching on a SENT bus signal.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:SLOW:DATA:HIVALue? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:SLOW:DATA:HIVALue? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:SLOW:DATA:HIVALue value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:SLOW:DATA:HIVALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:SLOW:DATA:HIVALue?

Info

Search<x> is the Search identifier number.
<Qstring> sets the binary Slow channel data value.

qualifier `property` ¶

qualifier: SearchSearchItemTriggerABusSentSlowDataQualifier

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:SLOW:DATA:QUALifier command.

Description

This command sets or queries the qualifier to be used when searching on SENT slow packet bus data.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:SLOW:DATA:QUALifier? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:SLOW:DATA:QUALifier? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:SLOW:DATA:QUALifier value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:SLOW:DATA:QUALifier {EQual|UNEQual|LESSthan|MOREthan|LESSEQual|MOREEQualINrange|OUTrange}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:SLOW:DATA:QUALifier?

Info

Search<x> is the number of the search.
EQUal specifies the qualifier as Equal.
LESSEQual sets the qualifier as Less Than or Equal to.
LESSThan sets the qualifier as Less Than.
MOREEQual sets the qualifier as More Than or Equal to.
MOREThan sets the qualifier as More Than.
UNEQual specifies the qualifier as Unequal.
INrange sets the search qualifier to inside a range.
OUTrange sets the search qualifier to outside a range.

value `property` ¶

value: SearchSearchItemTriggerABusSentSlowDataValue

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:SLOW:DATA:VALue command.

Description

This command sets or queries the binary slow channel data value to be used when searching on a SENT bus signal.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:SLOW:DATA:VALue? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:SLOW:DATA:VALue? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:SLOW:DATA:VALue value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:SLOW:DATA:VALue <Qstring>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:SLOW:DATA:VALue?

Info

Search<x> is the number of the search.
<Qstring> is the slow channel data binary value.

SearchSearchItemTriggerABusSentSlowDataHivalue ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:SLOW:DATA:HIVALue command.

Description

This command sets or queries the high binary Slow channel data value to use when searching on a SENT bus signal.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:SLOW:DATA:HIVALue? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:SLOW:DATA:HIVALue? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:SLOW:DATA:HIVALue value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:SLOW:DATA:HIVALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:SLOW:DATA:HIVALue?

Info

Search<x> is the Search identifier number.
<Qstring> sets the binary Slow channel data value.

SearchSearchItemTriggerABusSentSlowDataQualifier ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:SLOW:DATA:QUALifier command.

Description

This command sets or queries the qualifier to be used when searching on SENT slow packet bus data.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:SLOW:DATA:QUALifier? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:SLOW:DATA:QUALifier? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:SLOW:DATA:QUALifier value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:SLOW:DATA:QUALifier {EQual|UNEQual|LESSthan|MOREthan|LESSEQual|MOREEQualINrange|OUTrange}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:SLOW:DATA:QUALifier?

Info

Search<x> is the number of the search.
EQUal specifies the qualifier as Equal.
LESSEQual sets the qualifier as Less Than or Equal to.
LESSThan sets the qualifier as Less Than.
MOREEQual sets the qualifier as More Than or Equal to.
MOREThan sets the qualifier as More Than.
UNEQual specifies the qualifier as Unequal.
INrange sets the search qualifier to inside a range.
OUTrange sets the search qualifier to outside a range.

SearchSearchItemTriggerABusSentSlowDataValue ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:SLOW:DATA:VALue command.

Description

This command sets or queries the binary slow channel data value to be used when searching on a SENT bus signal.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:SLOW:DATA:VALue? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:SLOW:DATA:VALue? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:SLOW:DATA:VALue value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:SLOW:DATA:VALue <Qstring>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:SLOW:DATA:VALue?

Info

Search<x> is the number of the search.
<Qstring> is the slow channel data binary value.

SearchSearchItemTriggerABusSentSlowIdentifier ¶

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:SLOW:IDentifier command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:SLOW:IDentifier? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:SLOW:IDentifier? query and raise an AssertionError if the returned value does not match value.

Properties

.value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:SLOW:IDentifier:VALue command.

value `property` ¶

value: SearchSearchItemTriggerABusSentSlowIdentifierValue

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:SLOW:IDentifier:VALue command.

Description

This command sets or queries the binary slow identifier value to be used when searching on a SENT bus signal.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:SLOW:IDentifier:VALue? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:SLOW:IDentifier:VALue? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:SLOW:IDentifier:VALue value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:SLOW:IDentifier:VALue <Qstring>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:SLOW:IDentifier:VALue?

Info

Search<x> is the number of the search.
<Qstring> is the slow channel identifier binary value.

SearchSearchItemTriggerABusSentSlowIdentifierValue ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:SLOW:IDentifier:VALue command.

Description

This command sets or queries the binary slow identifier value to be used when searching on a SENT bus signal.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:SLOW:IDentifier:VALue? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:SLOW:IDentifier:VALue? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:SLOW:IDentifier:VALue value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:SLOW:IDentifier:VALue <Qstring>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:SLOW:IDentifier:VALue?

Info

Search<x> is the number of the search.
<Qstring> is the slow channel identifier binary value.

SearchSearchItemTriggerABusSource ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:SOUrce command.

Description

This command sets or queries the bus source for the bus search to determine where to place a mark. The search number is specified by x.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SOUrce? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SOUrce? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SOUrce value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:SOUrce {B0|B1|B2|B3|B4|B5|B6|B7|B8|B9|B10|B11|B12|B13|B14|B15|B16}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SOUrce?

Info

B<x> specifies the bus source as a bus number from B01 to B16. x has a minimum of 0 and a maximum of 16.

SearchSearchItemTriggerABusSpi ¶

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:SPI command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SPI? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SPI? query and raise an AssertionError if the returned value does not match value.

Properties

.condition: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:CONDition command.
.data: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:DATa command tree.
.sourcetype: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:SOURCETYpe command.

condition `property` ¶

condition: SearchSearchItemTriggerABusSpiCondition

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:CONDition command.

Description

This command sets or queries the search condition for an SPI bus search to determine where to place a mark. The search number is specified by x.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:CONDition? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:CONDition? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:CONDition value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:CONDition {DATA|SS|STARTofframe}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:CONDition?

Info

DATA specifies the trigger condition as Data.
SS specifies the trigger condition as Slave Selection.
STARTofframe specifies the trigger condition as start of frame.

data `property` ¶

data: SearchSearchItemTriggerABusSpiData

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:DATa command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:DATa? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:DATa? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.size: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:DATa:SIZe command.
.value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:DATa:VALue command.

sourcetype `property` ¶

sourcetype: SearchSearchItemTriggerABusSpiSourcetype

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:SOURCETYpe command.

Description

This command sets or queries trigger Source for SPI bus. The search number is specified by x.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:SOURCETYpe? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:SOURCETYpe? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:SOURCETYpe value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:SOURCETYpe {MISo|MOSi}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:SOURCETYpe?

Info

MISo specifies the trigger source as MISo. The default search source type is MISo.
MOSi specifies the trigger source as MOSi.

SearchSearchItemTriggerABusSpiCondition ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:CONDition command.

Description

This command sets or queries the search condition for an SPI bus search to determine where to place a mark. The search number is specified by x.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:CONDition? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:CONDition? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:CONDition value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:CONDition {DATA|SS|STARTofframe}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:CONDition?

Info

DATA specifies the trigger condition as Data.
SS specifies the trigger condition as Slave Selection.
STARTofframe specifies the trigger condition as start of frame.

SearchSearchItemTriggerABusSpiData ¶

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:DATa command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:DATa? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:DATa? query and raise an AssertionError if the returned value does not match value.

Properties

.size: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:DATa:SIZe command.
.value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:DATa:VALue command.

size `property` ¶

size: SearchSearchItemTriggerABusSpiDataSize

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:DATa:SIZe command.

Description

This command sets or queries the length of the data string in bytes used for the specified SPI bus trigger search to determine where to place a mark. The search condition must be DATA. The search number is specified by x.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:DATa:SIZe? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:DATa:SIZe? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:DATa:SIZe value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:DATa:SIZe <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:DATa:SIZe?

Info

<NR1> specifies the number of contiguous data bytes.

value `property` ¶

value: SearchSearchItemTriggerABusSpiDataValue

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:DATa:VALue command.

Description

The command sets or queries the binary data string used for an SPI bus search to determine where to place a mark. The search number is specified by x. The search condition must be DATA.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:DATa:VALue? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:DATa:VALue? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:DATa:VALue value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:DATa:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:DATa:VALue?

Info

<QString> specifies the data value in the specified valid format. The valid characters are 0, 1, and X for binary format; and A-F, 0-9, and X for hexadecimal format.

SearchSearchItemTriggerABusSpiDataSize ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:DATa:SIZe command.

Description

This command sets or queries the length of the data string in bytes used for the specified SPI bus trigger search to determine where to place a mark. The search condition must be DATA. The search number is specified by x.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:DATa:SIZe? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:DATa:SIZe? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:DATa:SIZe value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:DATa:SIZe <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:DATa:SIZe?

Info

<NR1> specifies the number of contiguous data bytes.

SearchSearchItemTriggerABusSpiDataValue ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:DATa:VALue command.

Description

The command sets or queries the binary data string used for an SPI bus search to determine where to place a mark. The search number is specified by x. The search condition must be DATA.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:DATa:VALue? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:DATa:VALue? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:DATa:VALue value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:DATa:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:DATa:VALue?

Info

<QString> specifies the data value in the specified valid format. The valid characters are 0, 1, and X for binary format; and A-F, 0-9, and X for hexadecimal format.

SearchSearchItemTriggerABusSpiSourcetype ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:SOURCETYpe command.

Description

This command sets or queries trigger Source for SPI bus. The search number is specified by x.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:SOURCETYpe? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:SOURCETYpe? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:SOURCETYpe value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:SOURCETYpe {MISo|MOSi}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:SOURCETYpe?

Info

MISo specifies the trigger source as MISo. The default search source type is MISo.
MOSi specifies the trigger source as MOSi.

SearchSearchItemTriggerAEdge ¶

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:EDGE command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:EDGE? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:EDGE? query and raise an AssertionError if the returned value does not match value.

Properties

.slope: The SEARCH:SEARCH<x>:TRIGger:A:EDGE:SLOpe command.
.source: The SEARCH:SEARCH<x>:TRIGger:A:EDGE:SOUrce command.
.threshold: The SEARCH:SEARCH<x>:TRIGger:A:EDGE:THReshold command.

slope `property` ¶

slope: SearchSearchItemTriggerAEdgeSlope

Return the SEARCH:SEARCH<x>:TRIGger:A:EDGE:SLOpe command.

Description

This command sets or queries the slope for an edge trigger search to determine where to place a mark. The search number is specified by x.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:EDGE:SLOpe? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:EDGE:SLOpe? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:EDGE:SLOpe value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:EDGE:SLOpe {RISe|FALL|EITher}
- SEARCH:SEARCH<x>:TRIGger:A:EDGE:SLOpe?

Info

RISe specifies a rising edge.
FALL specifies a falling edge.
EITher specifies either rising or falling edge.

source `property` ¶

source: SearchSearchItemTriggerAEdgeSource

Return the SEARCH:SEARCH<x>:TRIGger:A:EDGE:SOUrce command.

Description

This command sets or queries the source waveform for an edge trigger search to determine where to place a mark. The search number is specified by x.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:EDGE:SOUrce? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:EDGE:SOUrce? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:EDGE:SOUrce value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:EDGE:SOUrce {CH<x>|DCH<x>_D<x>|MATH<x>|REF<x>|REF<x>_D<x>}
- SEARCH:SEARCH<x>:TRIGger:A:EDGE:SOUrce?

Info

CH<x> specifies one input channel as the edge source, where the channel number is specified by x.
DCH<x>_D<x> specifies a digital waveform as the source waveform for the specified search. The supported digital channel value is 1. The supported digital bit values are 0 to 15.
MATH<x> specifies the math waveform as the search source, where the math number is specified by x.
REF<x> specifies the reference waveform as the search source, where the reference number is specified by x.
REF<x>_D<x> specifies a digital reference waveform as the source waveform for the specified search.

threshold `property` ¶

threshold: SearchSearchItemTriggerAEdgeThreshold

Return the SEARCH:SEARCH<x>:TRIGger:A:EDGE:THReshold command.

Description

This command sets or queries the source threshold level for an edge trigger search to determine where to place a mark. The search number is specified by x.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:EDGE:THReshold? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:EDGE:THReshold? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:EDGE:THReshold value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:EDGE:THReshold <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:EDGE:THReshold?

Info

<NR3> is the source threshold level for an edge trigger search.

SearchSearchItemTriggerAEdgeSlope ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:EDGE:SLOpe command.

Description

This command sets or queries the slope for an edge trigger search to determine where to place a mark. The search number is specified by x.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:EDGE:SLOpe? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:EDGE:SLOpe? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:EDGE:SLOpe value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:EDGE:SLOpe {RISe|FALL|EITher}
- SEARCH:SEARCH<x>:TRIGger:A:EDGE:SLOpe?

Info

RISe specifies a rising edge.
FALL specifies a falling edge.
EITher specifies either rising or falling edge.

SearchSearchItemTriggerAEdgeSource ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:EDGE:SOUrce command.

Description

This command sets or queries the source waveform for an edge trigger search to determine where to place a mark. The search number is specified by x.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:EDGE:SOUrce? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:EDGE:SOUrce? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:EDGE:SOUrce value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:EDGE:SOUrce {CH<x>|DCH<x>_D<x>|MATH<x>|REF<x>|REF<x>_D<x>}
- SEARCH:SEARCH<x>:TRIGger:A:EDGE:SOUrce?

Info

CH<x> specifies one input channel as the edge source, where the channel number is specified by x.
DCH<x>_D<x> specifies a digital waveform as the source waveform for the specified search. The supported digital channel value is 1. The supported digital bit values are 0 to 15.
MATH<x> specifies the math waveform as the search source, where the math number is specified by x.
REF<x> specifies the reference waveform as the search source, where the reference number is specified by x.
REF<x>_D<x> specifies a digital reference waveform as the source waveform for the specified search.

SearchSearchItemTriggerAEdgeThreshold ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:EDGE:THReshold command.

Description

This command sets or queries the source threshold level for an edge trigger search to determine where to place a mark. The search number is specified by x.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:EDGE:THReshold? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:EDGE:THReshold? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:EDGE:THReshold value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:EDGE:THReshold <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:EDGE:THReshold?

Info

<NR3> is the source threshold level for an edge trigger search.

SearchSearchItemTriggerALogic ¶

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:LOGIc command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc? query and raise an AssertionError if the returned value does not match value.

Properties

.clock: The SEARCH:SEARCH<x>:TRIGger:A:LOGIc:CLOCk command tree.
.deltatime: The SEARCH:SEARCH<x>:TRIGger:A:LOGIc:DELTatime command.
.function: The SEARCH:SEARCH<x>:TRIGger:A:LOGIc:FUNCtion command.
.input: The SEARCH:SEARCH<x>:TRIGger:A:LOGIc:INPUT command tree.
.level: The SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LEVel command tree.
.logicpattern: The SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LOGICPattern command tree.
.polarity: The SEARCH:SEARCH<x>:TRIGger:A:LOGIc:POLarity command.
.useclockedge: The SEARCH:SEARCH<x>:TRIGger:A:LOGIc:USEClockedge command.
.when: The SEARCH:SEARCH<x>:TRIGger:A:LOGIc:WHEn command.

clock `property` ¶

clock: SearchSearchItemTriggerALogicClock

Return the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:CLOCk command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:CLOCk? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:CLOCk? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.threshold: The SEARCH:SEARCH<x>:TRIGger:A:LOGIc:CLOCk:THReshold command.

deltatime `property` ¶

deltatime: SearchSearchItemTriggerALogicDeltatime

Return the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:DELTatime command.

Description

This command specifies the Logic search delta time value. The time value is used as part of the Logic search condition to determine if the duration of a logic pattern meets the specified time constraints. The search number is specified by x.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:DELTatime? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:DELTatime? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:DELTatime value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:DELTatime <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:DELTatime?

Info

<NR3> is delta time value.

function `property` ¶

function: SearchSearchItemTriggerALogicFunction

Return the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:FUNCtion command.

Description

This command sets or queries the logic operator for a pattern or state trigger search to determine where to place a mark. The search number is specified by x.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:FUNCtion? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:FUNCtion? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:FUNCtion value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:FUNCtion {AND|NANd|NOR|OR}
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:FUNCtion?

Info

AND places a mark if all conditions are true.
NANd places a mark if any of the conditions are false.
NOR places a mark if all conditions are false.
OR places a mark if any of the conditions are true.

input `property` ¶

input: SearchSearchItemTriggerALogicInput

Return the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:INPUT command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:INPUT? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:INPUT? query and raise an AssertionError if the returned value does not match value.

Info

CH<x> specifies one input channel as the edge source, where the channel number is specified by x.

Sub-properties

.clock: The SEARCH:SEARCH<x>:TRIGger:A:LOGIc:INPUT:CLOCK command tree.

level `property` ¶

level: SearchSearchItemTriggerALogicLevel

Return the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LEVel command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LEVel? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LEVel? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.ch: The SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LEVel:CH<x> command.
.math: The SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LEVel:MATH<x> command.
.ref: The SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LEVel:REF<x> command.

logicpattern `property` ¶

logicpattern: SearchSearchItemTriggerALogicLogicpattern

Return the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LOGICPattern command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LOGICPattern? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LOGICPattern? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.ch: The SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LOGICPattern:CH<x> command.
.dch: The SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LOGICPattern:DCH<x> command tree.
.math: The SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LOGICPattern:MATH<x> command.
.ref: The SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LOGICPattern:REF<x> command.

polarity `property` ¶

polarity: SearchSearchItemTriggerALogicPolarity

Return the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:POLarity command.

Description

This command sets or queries the polarity for the clock channel when Use Clock Edge is set to Yes for Logic search type. The search number is specified by x.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:POLarity? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:POLarity? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:POLarity value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:POLarity {POSitive|NEGative|EITher}
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:POLarity?

Info

POSitive specifies using the positive clock edge.
NEGative specifies using negative clock edge.
EITher specifies using either the positive or negative clock edge.

useclockedge `property` ¶

useclockedge: SearchSearchItemTriggerALogicUseclockedge

Return the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:USEClockedge command.

Description

This command specifies whether or not Logic search uses a clock source. The search number is specified by x.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:USEClockedge? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:USEClockedge? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:USEClockedge value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:USEClockedge {ON|OFF|1|0}
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:USEClockedge?

Info

OFF specifies not to use the clock source.
ON specifies to use the clock source.
0 specifies not to use the clock source.
1 specifies to use the clock source.

when `property` ¶

when: SearchSearchItemTriggerALogicWhen

Return the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:WHEn command.

Description

This command sets or queries the condition for generating an A or B logic search with respect to the defined input pattern.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:WHEn? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:WHEn? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:WHEn value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:WHEn {TRUe|FALSe|MOREThan|LESSThan|EQual|UNEQual}
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:WHEn?

Info

TRUe searches on an input value that is true.
FALSe searches on an input value that is false.
MOREthan searches on an input value that is greater than a set value.
LESSthan searches on an input value that is less than a set value.
EQual searches on an input value that is equal to a set value.
UNEQual searches on an input value that is not equal to a set value.

SearchSearchItemTriggerALogicClock ¶

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:LOGIc:CLOCk command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:CLOCk? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:CLOCk? query and raise an AssertionError if the returned value does not match value.

Properties

.threshold: The SEARCH:SEARCH<x>:TRIGger:A:LOGIc:CLOCk:THReshold command.

threshold `property` ¶

threshold: SearchSearchItemTriggerALogicClockThreshold

Return the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:CLOCk:THReshold command.

Description

This command sets or queries the logic clock threshold for a logic trigger search to determine where to place a mark. The search number is specified by x.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:CLOCk:THReshold? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:CLOCk:THReshold? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:CLOCk:THReshold value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:CLOCk:THReshold <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:CLOCk:THReshold?

Info

<NR3> is the logic clock threshold.

SearchSearchItemTriggerALogicClockThreshold ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:LOGIc:CLOCk:THReshold command.

Description

This command sets or queries the logic clock threshold for a logic trigger search to determine where to place a mark. The search number is specified by x.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:CLOCk:THReshold? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:CLOCk:THReshold? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:CLOCk:THReshold value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:CLOCk:THReshold <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:CLOCk:THReshold?

Info

<NR3> is the logic clock threshold.

SearchSearchItemTriggerALogicDeltatime ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:LOGIc:DELTatime command.

Description

This command specifies the Logic search delta time value. The time value is used as part of the Logic search condition to determine if the duration of a logic pattern meets the specified time constraints. The search number is specified by x.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:DELTatime? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:DELTatime? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:DELTatime value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:DELTatime <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:DELTatime?

Info

<NR3> is delta time value.

SearchSearchItemTriggerALogicFunction ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:LOGIc:FUNCtion command.

Description

This command sets or queries the logic operator for a pattern or state trigger search to determine where to place a mark. The search number is specified by x.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:FUNCtion? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:FUNCtion? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:FUNCtion value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:FUNCtion {AND|NANd|NOR|OR}
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:FUNCtion?

Info

AND places a mark if all conditions are true.
NANd places a mark if any of the conditions are false.
NOR places a mark if all conditions are false.
OR places a mark if any of the conditions are true.

SearchSearchItemTriggerALogicInput ¶

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:LOGIc:INPUT command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:INPUT? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:INPUT? query and raise an AssertionError if the returned value does not match value.

Info

CH<x> specifies one input channel as the edge source, where the channel number is specified by x.

Properties

.clock: The SEARCH:SEARCH<x>:TRIGger:A:LOGIc:INPUT:CLOCK command tree.

clock `property` ¶

clock: SearchSearchItemTriggerALogicInputClock

Return the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:INPUT:CLOCK command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:INPUT:CLOCK? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:INPUT:CLOCK? query and raise an AssertionError if the returned value does not match value.

Info

CH<x> specifies one input channel as the edge source, where the channel number is specified by x.

Sub-properties

.source: The SEARCH:SEARCH<x>:TRIGger:A:LOGIc:INPUT:CLOCK:SOUrce command.

SearchSearchItemTriggerALogicInputClock ¶

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:LOGIc:INPUT:CLOCK command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:INPUT:CLOCK? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:INPUT:CLOCK? query and raise an AssertionError if the returned value does not match value.

Info

CH<x> specifies one input channel as the edge source, where the channel number is specified by x.

Properties

.source: The SEARCH:SEARCH<x>:TRIGger:A:LOGIc:INPUT:CLOCK:SOUrce command.

source `property` ¶

source: SearchSearchItemTriggerALogicInputClockSource

Return the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:INPUT:CLOCK:SOUrce command.

Description

This command specifies or queries the channel to use as the clock source for logic trigger. The search number is specified by x.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:INPUT:CLOCK:SOUrce? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:INPUT:CLOCK:SOUrce? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:INPUT:CLOCK:SOUrce value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:INPUT:CLOCK:SOUrce {CH<x>|DCH<x>_D<x>|REF<x>_D<x>}
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:INPUT:CLOCK:SOUrce?

Info

CH<x> specifies one input channel as the edge source, where the channel number is specified by x.
DCH<x>_D<x> specifies a digital waveform as the source waveform for the specified search. The supported digital channel value is 1. The supported digital bit values are 0 to 15.
REF<x>_D<x> specifies a digital reference waveform as the source waveform for the specified search.

SearchSearchItemTriggerALogicInputClockSource ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:LOGIc:INPUT:CLOCK:SOUrce command.

Description

This command specifies or queries the channel to use as the clock source for logic trigger. The search number is specified by x.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:INPUT:CLOCK:SOUrce? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:INPUT:CLOCK:SOUrce? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:INPUT:CLOCK:SOUrce value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:INPUT:CLOCK:SOUrce {CH<x>|DCH<x>_D<x>|REF<x>_D<x>}
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:INPUT:CLOCK:SOUrce?

Info

CH<x> specifies one input channel as the edge source, where the channel number is specified by x.
DCH<x>_D<x> specifies a digital waveform as the source waveform for the specified search. The supported digital channel value is 1. The supported digital bit values are 0 to 15.
REF<x>_D<x> specifies a digital reference waveform as the source waveform for the specified search.

SearchSearchItemTriggerALogicLevel ¶

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LEVel command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LEVel? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LEVel? query and raise an AssertionError if the returned value does not match value.

Properties

.ch: The SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LEVel:CH<x> command.
.math: The SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LEVel:MATH<x> command.
.ref: The SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LEVel:REF<x> command.

ch `property` ¶

ch: dict[int, SearchSearchItemTriggerALogicLevelChannel]

Return the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LEVel:CH<x> command.

Description

This command sets or queries the voltage level to use for logic trigger search. The search number is specified by x.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LEVel:CH<x>? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LEVel:CH<x>? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LEVel:CH<x> value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LEVel:CH<x> <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LEVel:CH<x>?

Info

<NR3> is the voltage level to use for logic trigger search.

math `property` ¶

math: dict[int, SearchSearchItemTriggerALogicLevelMathItem]

Return the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LEVel:MATH<x> command.

Description

This command sets the voltage level to use for logic trigger search. The search number is specified by x.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LEVel:MATH<x>? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LEVel:MATH<x>? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LEVel:MATH<x> value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LEVel:MATH<x> <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LEVel:MATH<x>?

Info

<NR3> is the voltage level to use for logic trigger search.

ref `property` ¶

ref: dict[int, SearchSearchItemTriggerALogicLevelRefItem]

Return the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LEVel:REF<x> command.

Description

This command sets the voltage level to use for logic trigger search. The search number is specified by x.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LEVel:REF<x>? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LEVel:REF<x>? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LEVel:REF<x> value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LEVel:REF<x> <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LEVel:REF<x>?

Info

<NR3> is the voltage level to use for logic trigger search.

SearchSearchItemTriggerALogicLevelChannel ¶

Bases: ValidatedChannel, SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LEVel:CH<x> command.

Description

This command sets or queries the voltage level to use for logic trigger search. The search number is specified by x.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LEVel:CH<x>? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LEVel:CH<x>? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LEVel:CH<x> value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LEVel:CH<x> <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LEVel:CH<x>?

Info

<NR3> is the voltage level to use for logic trigger search.

SearchSearchItemTriggerALogicLevelMathItem ¶

Bases: ValidatedDynamicNumberCmd, SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LEVel:MATH<x> command.

Description

This command sets the voltage level to use for logic trigger search. The search number is specified by x.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LEVel:MATH<x>? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LEVel:MATH<x>? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LEVel:MATH<x> value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LEVel:MATH<x> <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LEVel:MATH<x>?

Info

<NR3> is the voltage level to use for logic trigger search.

SearchSearchItemTriggerALogicLevelRefItem ¶

Bases: ValidatedDynamicNumberCmd, SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LEVel:REF<x> command.

Description

This command sets the voltage level to use for logic trigger search. The search number is specified by x.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LEVel:REF<x>? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LEVel:REF<x>? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LEVel:REF<x> value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LEVel:REF<x> <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LEVel:REF<x>?

Info

<NR3> is the voltage level to use for logic trigger search.

SearchSearchItemTriggerALogicLogicpattern ¶

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LOGICPattern command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LOGICPattern? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LOGICPattern? query and raise an AssertionError if the returned value does not match value.

Properties

.ch: The SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LOGICPattern:CH<x> command.
.dch: The SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LOGICPattern:DCH<x> command tree.
.math: The SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LOGICPattern:MATH<x> command.
.ref: The SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LOGICPattern:REF<x> command.

ch `property` ¶

ch: dict[int, SearchSearchItemTriggerALogicLogicpatternChannel]

Return the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LOGICPattern:CH<x> command.

Description

This command sets or queries the conditions used for generating an A logic pattern, with respect to the defined input pattern, and identifies the time that the selected pattern may be true and still generate the trigger. The search number is specified by x.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LOGICPattern:CH<x>? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LOGICPattern:CH<x>? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LOGICPattern:CH<x> value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LOGICPattern:CH<x> {H|L|X}
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LOGICPattern:CH<x>?

Info

H specifies triggering when the pattern is high.
L specifies triggering when the pattern is low.
X specifies triggering when the pattern is high or low.

dch `property` ¶

dch: dict[int, SearchSearchItemTriggerALogicLogicpatternDchItem]

Return the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LOGICPattern:DCH<x> command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LOGICPattern:DCH<x>? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LOGICPattern:DCH<x>? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.d: The SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LOGICPattern:DCH<x>_D<x> command.

math `property` ¶

math: dict[int, SearchSearchItemTriggerALogicLogicpatternMathItem]

Return the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LOGICPattern:MATH<x> command.

Description

This command sets or queries the conditions used for generating an A logic pattern, with respect to the defined input pattern, and identifies the time that the selected pattern may be true and still generate the trigger. The search number is specified by x.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LOGICPattern:MATH<x>? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LOGICPattern:MATH<x>? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LOGICPattern:MATH<x> value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LOGICPattern:MATH<x> {H|L|X}
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LOGICPattern:MATH<x>?

Info

H specifies triggering when the pattern is high.
L specifies triggering when the pattern is low.
X specifies triggering when the pattern is high or low.

ref `property` ¶

ref: dict[int, SearchSearchItemTriggerALogicLogicpatternRefItem]

Return the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LOGICPattern:REF<x> command.

Description

This command sets or queries the conditions used for generating an A logic pattern, with respect to the defined input pattern, and identifies the time that the selected pattern may be true and still generate the trigger. The search number is specified by x.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LOGICPattern:REF<x>? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LOGICPattern:REF<x>? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LOGICPattern:REF<x> value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LOGICPattern:REF<x> {H|L|X}
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LOGICPattern:REF<x>?

Info

H specifies triggering when the pattern is high.
L specifies triggering when the pattern is low.
X specifies triggering when the pattern is high or low.

SearchSearchItemTriggerALogicLogicpatternChannel ¶

Bases: ValidatedChannel, SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LOGICPattern:CH<x> command.

Description

This command sets or queries the conditions used for generating an A logic pattern, with respect to the defined input pattern, and identifies the time that the selected pattern may be true and still generate the trigger. The search number is specified by x.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LOGICPattern:CH<x>? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LOGICPattern:CH<x>? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LOGICPattern:CH<x> value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LOGICPattern:CH<x> {H|L|X}
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LOGICPattern:CH<x>?

Info

H specifies triggering when the pattern is high.
L specifies triggering when the pattern is low.
X specifies triggering when the pattern is high or low.

SearchSearchItemTriggerALogicLogicpatternDchItem ¶

Bases: ValidatedDynamicNumberCmd, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LOGICPattern:DCH<x> command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LOGICPattern:DCH<x>? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LOGICPattern:DCH<x>? query and raise an AssertionError if the returned value does not match value.

Properties

.d: The SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LOGICPattern:DCH<x>_D<x> command.

d `property` ¶

d: dict[int, SearchSearchItemTriggerALogicLogicpatternDchItemDigitalBit]

Return the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LOGICPattern:DCH<x>_D<x> command.

Description

This command sets or queries the conditions used for generating an A logic pattern, with respect to the defined input pattern, and identifies the time that the selected pattern may be true and still generate the trigger. The search number is specified by x. The supported digital channel value is 1. The supported digital bit values are 0 to 15.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LOGICPattern:DCH<x>_D<x>? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LOGICPattern:DCH<x>_D<x>? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LOGICPattern:DCH<x>_D<x> value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LOGICPattern:DCH<x>_D<x> {H|L|X}
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LOGICPattern:DCH<x>_D<x>?

Info

H specifies triggering when the pattern is high.
L specifies triggering when the pattern is low.
X specifies triggering when the pattern is high or low.

SearchSearchItemTriggerALogicLogicpatternDchItemDigitalBit ¶

Bases: ValidatedDigitalBit, SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LOGICPattern:DCH<x>_D<x> command.

Description

This command sets or queries the conditions used for generating an A logic pattern, with respect to the defined input pattern, and identifies the time that the selected pattern may be true and still generate the trigger. The search number is specified by x. The supported digital channel value is 1. The supported digital bit values are 0 to 15.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LOGICPattern:DCH<x>_D<x>? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LOGICPattern:DCH<x>_D<x>? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LOGICPattern:DCH<x>_D<x> value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LOGICPattern:DCH<x>_D<x> {H|L|X}
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LOGICPattern:DCH<x>_D<x>?

Info

H specifies triggering when the pattern is high.
L specifies triggering when the pattern is low.
X specifies triggering when the pattern is high or low.

SearchSearchItemTriggerALogicLogicpatternMathItem ¶

Bases: ValidatedDynamicNumberCmd, SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LOGICPattern:MATH<x> command.

Description

This command sets or queries the conditions used for generating an A logic pattern, with respect to the defined input pattern, and identifies the time that the selected pattern may be true and still generate the trigger. The search number is specified by x.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LOGICPattern:MATH<x>? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LOGICPattern:MATH<x>? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LOGICPattern:MATH<x> value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LOGICPattern:MATH<x> {H|L|X}
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LOGICPattern:MATH<x>?

Info

H specifies triggering when the pattern is high.
L specifies triggering when the pattern is low.
X specifies triggering when the pattern is high or low.

SearchSearchItemTriggerALogicLogicpatternRefItem ¶

Bases: ValidatedDynamicNumberCmd, SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LOGICPattern:REF<x> command.

Description

This command sets or queries the conditions used for generating an A logic pattern, with respect to the defined input pattern, and identifies the time that the selected pattern may be true and still generate the trigger. The search number is specified by x.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LOGICPattern:REF<x>? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LOGICPattern:REF<x>? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LOGICPattern:REF<x> value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LOGICPattern:REF<x> {H|L|X}
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LOGICPattern:REF<x>?

Info

H specifies triggering when the pattern is high.
L specifies triggering when the pattern is low.
X specifies triggering when the pattern is high or low.

SearchSearchItemTriggerALogicPolarity ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:LOGIc:POLarity command.

Description

This command sets or queries the polarity for the clock channel when Use Clock Edge is set to Yes for Logic search type. The search number is specified by x.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:POLarity? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:POLarity? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:POLarity value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:POLarity {POSitive|NEGative|EITher}
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:POLarity?

Info

POSitive specifies using the positive clock edge.
NEGative specifies using negative clock edge.
EITher specifies using either the positive or negative clock edge.

SearchSearchItemTriggerALogicUseclockedge ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:LOGIc:USEClockedge command.

Description

This command specifies whether or not Logic search uses a clock source. The search number is specified by x.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:USEClockedge? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:USEClockedge? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:USEClockedge value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:USEClockedge {ON|OFF|1|0}
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:USEClockedge?

Info

OFF specifies not to use the clock source.
ON specifies to use the clock source.
0 specifies not to use the clock source.
1 specifies to use the clock source.

SearchSearchItemTriggerALogicWhen ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:LOGIc:WHEn command.

Description

This command sets or queries the condition for generating an A or B logic search with respect to the defined input pattern.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:WHEn? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:WHEn? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:WHEn value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:WHEn {TRUe|FALSe|MOREThan|LESSThan|EQual|UNEQual}
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:WHEn?

Info

TRUe searches on an input value that is true.
FALSe searches on an input value that is false.
MOREthan searches on an input value that is greater than a set value.
LESSthan searches on an input value that is less than a set value.
EQual searches on an input value that is equal to a set value.
UNEQual searches on an input value that is not equal to a set value.

SearchSearchItemTriggerAPulsewidth ¶

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth? query and raise an AssertionError if the returned value does not match value.

Properties

.highlimit: The SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:HIGHLimit command.
.logicqualification: The SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:LOGICQUALification command.
.lowlimit: The SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:LOWLimit command.
.polarity: The SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:POLarity command.
.source: The SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:SOUrce command.
.threshold: The SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:THReshold command.
.when: The SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:WHEn command.

highlimit `property` ¶

highlimit: SearchSearchItemTriggerAPulsewidthHighlimit

Return the SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:HIGHLimit command.

Description

This command specifies the upper limit to use, in seconds, when searching for a pulse whose duration is inside or outside a range of two values. The search number is specified by x.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:HIGHLimit? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:HIGHLimit? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:HIGHLimit value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:HIGHLimit <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:HIGHLimit?

Info

<NR3> is the upper limit to use, in seconds, when searching for a pulse.

logicqualification `property` ¶

logicqualification: SearchSearchItemTriggerAPulsewidthLogicqualification

Return the SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:LOGICQUALification command.

Description

This command specifies whether or not to use logic qualification for a pulse width search. The search number is specified by x.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:LOGICQUALification? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:LOGICQUALification? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:LOGICQUALification value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:LOGICQUALification {ON|OFF}
- SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:LOGICQUALification?

Info

ON specifies to use logic qualification.
OFF specifies not to use logic qualification.

lowlimit `property` ¶

lowlimit: SearchSearchItemTriggerAPulsewidthLowlimit

Return the SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:LOWLimit command.

Description

This command specifies the lower limit to use, in seconds, when searching for a pulse whose duration is inside or outside a range of two values. The search number is specified by x.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:LOWLimit? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:LOWLimit? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:LOWLimit value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:LOWLimit <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:LOWLimit?

Info

<NR3> is the lower limit to use, in seconds, when searching for a pulse.

polarity `property` ¶

polarity: SearchSearchItemTriggerAPulsewidthPolarity

Return the SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:POLarity command.

Description

This command specifies the polarity for a pulse width search. The search number is specified by x.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:POLarity? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:POLarity? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:POLarity value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:POLarity {POSitive|NEGative}
- SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:POLarity?

Info

POSitive specifies positive polarity for a pulse width search.
NEGative specifies negative polarity for a pulse width search.

source `property` ¶

source: SearchSearchItemTriggerAPulsewidthSource

Return the SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:SOUrce command.

Description

This command sets and queries the source for the pulse width search input. The search number is specified by x.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:SOUrce? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:SOUrce? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:SOUrce value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:SOUrce {CH<x>|DCH<x>_D<x>|MATH<x>|REF<x>|REF<x>_D<x>}
- SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:SOUrce?

Info

CH<x> specifies an analog channel to use as the source.
DCH<x>_D<x> specifies a digital channel to use as the source. The supported digital channel value is 1. The supported digital bit values are 0 to 15.
MATH<x> specifies a math waveform to use as the source.
REF<x> specifies a reference waveform to use as the source.
REF<x>_D<x> specifies a digital reference waveform as the source.

threshold `property` ¶

threshold: SearchSearchItemTriggerAPulsewidthThreshold

Return the SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:THReshold command.

Description

Sets or queries the source threshold level for a pulse width trigger search to determine where to place a mark. The search number is specified by x.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:THReshold? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:THReshold? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:THReshold value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:THReshold <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:THReshold?

Info

<NR3> is the source threshold level for a pulse width trigger search.

when `property` ¶

when: SearchSearchItemTriggerAPulsewidthWhen

Return the SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:WHEn command.

Description

This command specifies to search for a pulse with a width (duration) that is less than, greater than, equal to, or unequal to a specified value (set using SEARch:A:PULSEWidth:WIDth ), OR whose SEARch:A:PULSEWidth:LOWLimit and SEARch:A:PULSEWidth:HIGHLimit ). The search number is specified by x.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:WHEn? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:WHEn? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:WHEn value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:WHEn {LESSthan|MOREthan|EQual|UNEQual|WIThin|OUTside}
- SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:WHEn?

Info

LESSthan causes a search when a pulse is detected with a width less than the time set by the SEARch:A:PULSEWidth:WIDth command.
MOREthan causes a search when a pulse is detected with a width greater than the time set by the SEARch:A:PULSEWidth:WIDth command.
EQual causes a search when a pulse is detected with a width equal to the time period specified in SEARch:A:PULSEWidth:WIDth within a ±5% tolerance.
UNEQual causes a search when a pulse is detected with a width greater than or less than (but not equal) the time period specified in SEARch:A:PULSEWidth:WIDth within a ±5% tolerance.
WIThin causes a search when a pulse is detected that is within a range set by two values.
OUTside causes a search when a pulse is detected that is outside of a range set by two values.

SearchSearchItemTriggerAPulsewidthHighlimit ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:HIGHLimit command.

Description

This command specifies the upper limit to use, in seconds, when searching for a pulse whose duration is inside or outside a range of two values. The search number is specified by x.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:HIGHLimit? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:HIGHLimit? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:HIGHLimit value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:HIGHLimit <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:HIGHLimit?

Info

<NR3> is the upper limit to use, in seconds, when searching for a pulse.

SearchSearchItemTriggerAPulsewidthLogicqualification ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:LOGICQUALification command.

Description

This command specifies whether or not to use logic qualification for a pulse width search. The search number is specified by x.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:LOGICQUALification? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:LOGICQUALification? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:LOGICQUALification value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:LOGICQUALification {ON|OFF}
- SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:LOGICQUALification?

Info

ON specifies to use logic qualification.
OFF specifies not to use logic qualification.

SearchSearchItemTriggerAPulsewidthLowlimit ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:LOWLimit command.

Description

This command specifies the lower limit to use, in seconds, when searching for a pulse whose duration is inside or outside a range of two values. The search number is specified by x.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:LOWLimit? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:LOWLimit? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:LOWLimit value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:LOWLimit <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:LOWLimit?

Info

<NR3> is the lower limit to use, in seconds, when searching for a pulse.

SearchSearchItemTriggerAPulsewidthPolarity ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:POLarity command.

Description

This command specifies the polarity for a pulse width search. The search number is specified by x.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:POLarity? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:POLarity? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:POLarity value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:POLarity {POSitive|NEGative}
- SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:POLarity?

Info

POSitive specifies positive polarity for a pulse width search.
NEGative specifies negative polarity for a pulse width search.

SearchSearchItemTriggerAPulsewidthSource ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:SOUrce command.

Description

This command sets and queries the source for the pulse width search input. The search number is specified by x.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:SOUrce? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:SOUrce? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:SOUrce value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:SOUrce {CH<x>|DCH<x>_D<x>|MATH<x>|REF<x>|REF<x>_D<x>}
- SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:SOUrce?

Info

CH<x> specifies an analog channel to use as the source.
DCH<x>_D<x> specifies a digital channel to use as the source. The supported digital channel value is 1. The supported digital bit values are 0 to 15.
MATH<x> specifies a math waveform to use as the source.
REF<x> specifies a reference waveform to use as the source.
REF<x>_D<x> specifies a digital reference waveform as the source.

SearchSearchItemTriggerAPulsewidthThreshold ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:THReshold command.

Description

Sets or queries the source threshold level for a pulse width trigger search to determine where to place a mark. The search number is specified by x.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:THReshold? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:THReshold? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:THReshold value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:THReshold <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:THReshold?

Info

<NR3> is the source threshold level for a pulse width trigger search.

SearchSearchItemTriggerAPulsewidthWhen ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:WHEn command.

Description

This command specifies to search for a pulse with a width (duration) that is less than, greater than, equal to, or unequal to a specified value (set using SEARch:A:PULSEWidth:WIDth ), OR whose SEARch:A:PULSEWidth:LOWLimit and SEARch:A:PULSEWidth:HIGHLimit ). The search number is specified by x.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:WHEn? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:WHEn? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:WHEn value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:WHEn {LESSthan|MOREthan|EQual|UNEQual|WIThin|OUTside}
- SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:WHEn?

Info

LESSthan causes a search when a pulse is detected with a width less than the time set by the SEARch:A:PULSEWidth:WIDth command.
MOREthan causes a search when a pulse is detected with a width greater than the time set by the SEARch:A:PULSEWidth:WIDth command.
EQual causes a search when a pulse is detected with a width equal to the time period specified in SEARch:A:PULSEWidth:WIDth within a ±5% tolerance.
UNEQual causes a search when a pulse is detected with a width greater than or less than (but not equal) the time period specified in SEARch:A:PULSEWidth:WIDth within a ±5% tolerance.
WIThin causes a search when a pulse is detected that is within a range set by two values.
OUTside causes a search when a pulse is detected that is outside of a range set by two values.

SearchSearchItemTriggerARunt ¶

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:RUNT command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:RUNT? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:RUNT? query and raise an AssertionError if the returned value does not match value.

Properties

.logicqualification: The SEARCH:SEARCH<x>:TRIGger:A:RUNT:LOGICQUALification command.
.polarity: The SEARCH:SEARCH<x>:TRIGger:A:RUNT:POLarity command.
.source: The SEARCH:SEARCH<x>:TRIGger:A:RUNT:SOUrce command.
.threshold: The SEARCH:SEARCH<x>:TRIGger:A:RUNT:THReshold command tree.
.when: The SEARCH:SEARCH<x>:TRIGger:A:RUNT:WHEn command.
.width: The SEARCH:SEARCH<x>:TRIGger:A:RUNT:WIDth command.

logicqualification `property` ¶

logicqualification: SearchSearchItemTriggerARuntLogicqualification

Return the SEARCH:SEARCH<x>:TRIGger:A:RUNT:LOGICQUALification command.

Description

This command specifies whether or not to use logic qualification for a runt search. The search number is specified by x.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:RUNT:LOGICQUALification? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:RUNT:LOGICQUALification? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:RUNT:LOGICQUALification value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:RUNT:LOGICQUALification {ON|OFF}
- SEARCH:SEARCH<x>:TRIGger:A:RUNT:LOGICQUALification?

Info

ON specifies to use logic qualification for a runt search.
OFF specifies not to use logic qualification for a runt search.

polarity `property` ¶

polarity: SearchSearchItemTriggerARuntPolarity

Return the SEARCH:SEARCH<x>:TRIGger:A:RUNT:POLarity command.

Description

This command specifies the polarity for the runt search. The search number is specified by x.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:RUNT:POLarity? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:RUNT:POLarity? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:RUNT:POLarity value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:RUNT:POLarity {POSitive|NEGative|EITher}
- SEARCH:SEARCH<x>:TRIGger:A:RUNT:POLarity?

Info

POSitive specifies using positive polarity for the runt search.
NEGative specifies using negative polarity for the runt search.
EITher specifies using either positive or negative polarity for the runt search.

source `property` ¶

source: SearchSearchItemTriggerARuntSource

Return the SEARCH:SEARCH<x>:TRIGger:A:RUNT:SOUrce command.

Description

This command sets and queries the source for the Runt search input. The search number is specified by x.

Usage

Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:RUNT:SOUrce value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:RUNT:SOUrce {CH<x>|REF<x>}

Info

CH<x> specifies an analog channel as the search source, where the channel number is specified by x.
REF<x> specifies the reference waveform as the search source, where the reference number is specified by x.

threshold `property` ¶

threshold: SearchSearchItemTriggerARuntThreshold

Return the SEARCH:SEARCH<x>:TRIGger:A:RUNT:THReshold command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:RUNT:THReshold? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:RUNT:THReshold? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.high: The SEARCH:SEARCH<x>:TRIGger:A:RUNT:THReshold:HIGH command.
.low: The SEARCH:SEARCH<x>:TRIGger:A:RUNT:THReshold:LOW command.

when `property` ¶

when: SearchSearchItemTriggerARuntWhen

Return the SEARCH:SEARCH<x>:TRIGger:A:RUNT:WHEn command.

Description

This command sets or queries the condition setting for a runt trigger search to determine where to place a mark. The search number is specified by x.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:RUNT:WHEn? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:RUNT:WHEn? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:RUNT:WHEn value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:RUNT:WHEn {OCCURS|LESSthan|MOREthan|EQual}NOTEQual}
- SEARCH:SEARCH<x>:TRIGger:A:RUNT:WHEn?

Info

LESSthan argument sets the instrument to search if the a runt pulse is detected with width less than the time set by the SEARCH:SEARCH<x>:TRIGger:A:RUNT:WIDth command.
MOREthan argument sets the instrument to search if the a runt pulse is detected with width more than the time set by the SEARCH:SEARCH<x>:TRIGger:A:RUNT:WIDth command.
EQual argument sets the instrument to search when the pattern is true for a time period equal to the time period specified in SEARCH:SEARCH<x>:TRIGger:A:RUNT:WIDth within a ±5% tolerance.
NOTEQual argument sets the instrument to search when the pattern is true for atime period greater than or less than (but not equal) the time period specified in SEARCH:SEARCH<x>:TRIGger:A:RUNT:WIDth within a ±5% tolerance.
OCCURS argument specifies a search event if a runt of any detectable width occurs.

width `property` ¶

width: SearchSearchItemTriggerARuntWidth

Return the SEARCH:SEARCH<x>:TRIGger:A:RUNT:WIDth command.

Description

This command sets or queries the width setting for a runt trigger search to determine where to place a mark. The search number is specified by x.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:RUNT:WIDth? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:RUNT:WIDth? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:RUNT:WIDth value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:RUNT:WIDth <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:RUNT:WIDth?

Info

<NR3> specifies the minimum width in seconds.

SearchSearchItemTriggerARuntLogicqualification ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:RUNT:LOGICQUALification command.

Description

This command specifies whether or not to use logic qualification for a runt search. The search number is specified by x.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:RUNT:LOGICQUALification? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:RUNT:LOGICQUALification? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:RUNT:LOGICQUALification value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:RUNT:LOGICQUALification {ON|OFF}
- SEARCH:SEARCH<x>:TRIGger:A:RUNT:LOGICQUALification?

Info

ON specifies to use logic qualification for a runt search.
OFF specifies not to use logic qualification for a runt search.

SearchSearchItemTriggerARuntPolarity ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:RUNT:POLarity command.

Description

This command specifies the polarity for the runt search. The search number is specified by x.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:RUNT:POLarity? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:RUNT:POLarity? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:RUNT:POLarity value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:RUNT:POLarity {POSitive|NEGative|EITher}
- SEARCH:SEARCH<x>:TRIGger:A:RUNT:POLarity?

Info

POSitive specifies using positive polarity for the runt search.
NEGative specifies using negative polarity for the runt search.
EITher specifies using either positive or negative polarity for the runt search.

SearchSearchItemTriggerARuntSource ¶

Bases: SCPICmdWrite

The SEARCH:SEARCH<x>:TRIGger:A:RUNT:SOUrce command.

Description

This command sets and queries the source for the Runt search input. The search number is specified by x.

Usage

Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:RUNT:SOUrce value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:RUNT:SOUrce {CH<x>|REF<x>}

Info

CH<x> specifies an analog channel as the search source, where the channel number is specified by x.
REF<x> specifies the reference waveform as the search source, where the reference number is specified by x.

SearchSearchItemTriggerARuntThreshold ¶

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:RUNT:THReshold command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:RUNT:THReshold? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:RUNT:THReshold? query and raise an AssertionError if the returned value does not match value.

Properties

.high: The SEARCH:SEARCH<x>:TRIGger:A:RUNT:THReshold:HIGH command.
.low: The SEARCH:SEARCH<x>:TRIGger:A:RUNT:THReshold:LOW command.

high `property` ¶

high: SearchSearchItemTriggerARuntThresholdHigh

Return the SEARCH:SEARCH<x>:TRIGger:A:RUNT:THReshold:HIGH command.

Description

This command sets or queries the source threshold HIGH level for a runt trigger search to determine where to place a mark.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:RUNT:THReshold:HIGH? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:RUNT:THReshold:HIGH? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:RUNT:THReshold:HIGH value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:RUNT:THReshold:HIGH <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:RUNT:THReshold:HIGH?

Info

<NR3> is the source threshold HIGH level for a runt trigger search.

low `property` ¶

low: SearchSearchItemTriggerARuntThresholdLow

Return the SEARCH:SEARCH<x>:TRIGger:A:RUNT:THReshold:LOW command.

Description

Sets or queries the source threshold LOW level for a runt trigger search to determine where to place a mark. The search number is specified by x.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:RUNT:THReshold:LOW? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:RUNT:THReshold:LOW? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:RUNT:THReshold:LOW value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:RUNT:THReshold:LOW <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:RUNT:THReshold:LOW?

Info

<NR3> is the source threshold LOW level for a runt trigger search.

SearchSearchItemTriggerARuntThresholdHigh ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:RUNT:THReshold:HIGH command.

Description

This command sets or queries the source threshold HIGH level for a runt trigger search to determine where to place a mark.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:RUNT:THReshold:HIGH? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:RUNT:THReshold:HIGH? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:RUNT:THReshold:HIGH value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:RUNT:THReshold:HIGH <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:RUNT:THReshold:HIGH?

Info

<NR3> is the source threshold HIGH level for a runt trigger search.

SearchSearchItemTriggerARuntThresholdLow ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:RUNT:THReshold:LOW command.

Description

Sets or queries the source threshold LOW level for a runt trigger search to determine where to place a mark. The search number is specified by x.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:RUNT:THReshold:LOW? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:RUNT:THReshold:LOW? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:RUNT:THReshold:LOW value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:RUNT:THReshold:LOW <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:RUNT:THReshold:LOW?

Info

<NR3> is the source threshold LOW level for a runt trigger search.

SearchSearchItemTriggerARuntWhen ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:RUNT:WHEn command.

Description

This command sets or queries the condition setting for a runt trigger search to determine where to place a mark. The search number is specified by x.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:RUNT:WHEn? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:RUNT:WHEn? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:RUNT:WHEn value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:RUNT:WHEn {OCCURS|LESSthan|MOREthan|EQual}NOTEQual}
- SEARCH:SEARCH<x>:TRIGger:A:RUNT:WHEn?

Info

LESSthan argument sets the instrument to search if the a runt pulse is detected with width less than the time set by the SEARCH:SEARCH<x>:TRIGger:A:RUNT:WIDth command.
MOREthan argument sets the instrument to search if the a runt pulse is detected with width more than the time set by the SEARCH:SEARCH<x>:TRIGger:A:RUNT:WIDth command.
EQual argument sets the instrument to search when the pattern is true for a time period equal to the time period specified in SEARCH:SEARCH<x>:TRIGger:A:RUNT:WIDth within a ±5% tolerance.
NOTEQual argument sets the instrument to search when the pattern is true for atime period greater than or less than (but not equal) the time period specified in SEARCH:SEARCH<x>:TRIGger:A:RUNT:WIDth within a ±5% tolerance.
OCCURS argument specifies a search event if a runt of any detectable width occurs.

SearchSearchItemTriggerARuntWidth ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:RUNT:WIDth command.

Description

This command sets or queries the width setting for a runt trigger search to determine where to place a mark. The search number is specified by x.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:RUNT:WIDth? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:RUNT:WIDth? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:RUNT:WIDth value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:RUNT:WIDth <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:RUNT:WIDth?

Info

<NR3> specifies the minimum width in seconds.

SearchSearchItemTriggerASethold ¶

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:SETHold command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold? query and raise an AssertionError if the returned value does not match value.

Properties

.clock: The SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk command tree.
.holdtime: The SEARCH:SEARCH<x>:TRIGger:A:SETHold:HOLDTime command.
.level: The SEARCH:SEARCH<x>:TRIGger:A:SETHold:LEVel command tree.
.logicpattern: The SEARCH:SEARCH<x>:TRIGger:A:SETHold:LOGICPattern command tree.
.settime: The SEARCH:SEARCH<x>:TRIGger:A:SETHold:SETTime command.

clock `property` ¶

clock: SearchSearchItemTriggerASetholdClock

Return the SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.edge: The SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:EDGE command.
.source: The SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:SOUrce command.
.threshold: The SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:THReshold command.

holdtime `property` ¶

holdtime: SearchSearchItemTriggerASetholdHoldtime

Return the SEARCH:SEARCH<x>:TRIGger:A:SETHold:HOLDTime command.

Description

This command sets or queries the hold time setting for a setup/hold trigger search to determine where to place a mark. The search number is specified by x.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:HOLDTime? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:HOLDTime? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:HOLDTime value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:SETHold:HOLDTime <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:SETHold:HOLDTime?

Info

<NR3> specifies the hold time setting in seconds. Positive values for hold time occur after the clock edge. Negative values occur before the clock edge.

level `property` ¶

level: SearchSearchItemTriggerASetholdLevel

Return the SEARCH:SEARCH<x>:TRIGger:A:SETHold:LEVel command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:LEVel? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:LEVel? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.ch: The SEARCH:SEARCH<x>:TRIGger:A:SETHold:LEVel:CH<x> command.
.math: The SEARCH:SEARCH<x>:TRIGger:A:SETHold:LEVel:MATH<x> command.
.ref: The SEARCH:SEARCH<x>:TRIGger:A:SETHold:LEVel:REF<x> command.

logicpattern `property` ¶

logicpattern: SearchSearchItemTriggerASetholdLogicpattern

Return the SEARCH:SEARCH<x>:TRIGger:A:SETHold:LOGICPattern command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:LOGICPattern? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:LOGICPattern? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.ch: The SEARCH:SEARCH<x>:TRIGger:A:SETHold:LOGICPattern:CH<x> command.
.dch: The SEARCH:SEARCH<x>:TRIGger:A:SETHold:LOGICPattern:DCH<x> command tree.
.math: The SEARCH:SEARCH<x>:TRIGger:A:SETHold:LOGICPattern:MATH<x> command.
.ref: The SEARCH:SEARCH<x>:TRIGger:A:SETHold:LOGICPattern:REF<x> command.

settime `property` ¶

settime: SearchSearchItemTriggerASetholdSettime

Return the SEARCH:SEARCH<x>:TRIGger:A:SETHold:SETTime command.

Description

This command sets or queries the setup time setting for a setup/hold trigger search to determine where to place a mark. The search number is specified by x.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:SETTime? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:SETTime? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:SETTime value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:SETHold:SETTime <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:SETHold:SETTime?

Info

<NR3> specifies the setup time for setup and hold violation triggering.

SearchSearchItemTriggerASetholdClock ¶

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk? query and raise an AssertionError if the returned value does not match value.

Properties

.edge: The SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:EDGE command.
.source: The SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:SOUrce command.
.threshold: The SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:THReshold command.

edge `property` ¶

edge: SearchSearchItemTriggerASetholdClockEdge

Return the SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:EDGE command.

Description

This command sets or queries the clock slope setting for a setup/hold trigger search to determine where to place a mark. The search number is specified by x.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:EDGE? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:EDGE? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:EDGE value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:EDGE {FALL|RISe}
- SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:EDGE?

Info

FALL specifies the polarity as the clock falling edge.
RISe specifies the polarity as the clock rising edge.

source `property` ¶

source: SearchSearchItemTriggerASetholdClockSource

Return the SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:SOUrce command.

Description

This command sets or queries the clock source setting for a setup/hold trigger search to determine where to place a mark. The search number is specified by x.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:SOUrce? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:SOUrce? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:SOUrce value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:SOUrce {CH<x>|DCH<x>_D<x>|MATH<x>|REF<x>|REF<x>_D<x>}
- SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:SOUrce?

Info

CH<x> specifies an input channel as the edge source, where = 1, 2, 3, 4, 5, 6, 7, or 8, depending on the number of channels in your instrument.
DCH<x>_D<x> specifies a digital waveform as the setup and hold clock source waveform for the specified search. The supported digital channel value is 1. The supported digital bit values are 0 to 15.
MATH<x> specifies the math waveform as the search source, where = ≥1.
REF<x> specifies the reference waveform as the search source, where = ≥1.
REF<x>_D<x> specifies a digital reference waveform as the setup and hold clock source waveform for the specified search.

threshold `property` ¶

threshold: SearchSearchItemTriggerASetholdClockThreshold

Return the SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:THReshold command.

Description

This command sets or queries the clock threshold setting for a setup/hold trigger search to determine where to place a mark. The search number is specified by x.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:THReshold? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:THReshold? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:THReshold value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:THReshold <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:THReshold?

Info

<NR3> the clock threshold setting for a setup/hold trigger search.

SearchSearchItemTriggerASetholdClockEdge ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:EDGE command.

Description

This command sets or queries the clock slope setting for a setup/hold trigger search to determine where to place a mark. The search number is specified by x.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:EDGE? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:EDGE? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:EDGE value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:EDGE {FALL|RISe}
- SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:EDGE?

Info

FALL specifies the polarity as the clock falling edge.
RISe specifies the polarity as the clock rising edge.

SearchSearchItemTriggerASetholdClockSource ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:SOUrce command.

Description

This command sets or queries the clock source setting for a setup/hold trigger search to determine where to place a mark. The search number is specified by x.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:SOUrce? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:SOUrce? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:SOUrce value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:SOUrce {CH<x>|DCH<x>_D<x>|MATH<x>|REF<x>|REF<x>_D<x>}
- SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:SOUrce?

Info

CH<x> specifies an input channel as the edge source, where = 1, 2, 3, 4, 5, 6, 7, or 8, depending on the number of channels in your instrument.
DCH<x>_D<x> specifies a digital waveform as the setup and hold clock source waveform for the specified search. The supported digital channel value is 1. The supported digital bit values are 0 to 15.
MATH<x> specifies the math waveform as the search source, where = ≥1.
REF<x> specifies the reference waveform as the search source, where = ≥1.
REF<x>_D<x> specifies a digital reference waveform as the setup and hold clock source waveform for the specified search.

SearchSearchItemTriggerASetholdClockThreshold ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:THReshold command.

Description

This command sets or queries the clock threshold setting for a setup/hold trigger search to determine where to place a mark. The search number is specified by x.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:THReshold? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:THReshold? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:THReshold value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:THReshold <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:THReshold?

Info

<NR3> the clock threshold setting for a setup/hold trigger search.

SearchSearchItemTriggerASetholdHoldtime ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:SETHold:HOLDTime command.

Description

This command sets or queries the hold time setting for a setup/hold trigger search to determine where to place a mark. The search number is specified by x.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:HOLDTime? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:HOLDTime? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:HOLDTime value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:SETHold:HOLDTime <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:SETHold:HOLDTime?

Info

<NR3> specifies the hold time setting in seconds. Positive values for hold time occur after the clock edge. Negative values occur before the clock edge.

SearchSearchItemTriggerASetholdLevel ¶

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:SETHold:LEVel command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:LEVel? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:LEVel? query and raise an AssertionError if the returned value does not match value.

Properties

.ch: The SEARCH:SEARCH<x>:TRIGger:A:SETHold:LEVel:CH<x> command.
.math: The SEARCH:SEARCH<x>:TRIGger:A:SETHold:LEVel:MATH<x> command.
.ref: The SEARCH:SEARCH<x>:TRIGger:A:SETHold:LEVel:REF<x> command.

ch `property` ¶

ch: dict[int, SearchSearchItemTriggerASetholdLevelChannel]

Return the SEARCH:SEARCH<x>:TRIGger:A:SETHold:LEVel:CH<x> command.

Description

This command sets or queries the voltage level to use for setup & hold trigger search. The search number is specified by x.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:LEVel:CH<x>? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:LEVel:CH<x>? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:LEVel:CH<x> value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:SETHold:LEVel:CH<x> <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:SETHold:LEVel:CH<x>?

Info

<NR3> the voltage level to use for setup & hold trigger search.

math `property` ¶

math: dict[int, SearchSearchItemTriggerASetholdLevelMathItem]

Return the SEARCH:SEARCH<x>:TRIGger:A:SETHold:LEVel:MATH<x> command.

Description

This command sets or queries the voltage level to use for setup & hold trigger search. The search number is specified by x.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:LEVel:MATH<x>? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:LEVel:MATH<x>? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:LEVel:MATH<x> value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:SETHold:LEVel:MATH<x> <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:SETHold:LEVel:MATH<x>?

Info

<NR3> isi the voltage level to use for setup & hold trigger search.

ref `property` ¶

ref: dict[int, SearchSearchItemTriggerASetholdLevelRefItem]

Return the SEARCH:SEARCH<x>:TRIGger:A:SETHold:LEVel:REF<x> command.

Description

This command sets or queries the voltage level to use for setup & hold trigger search. The search number is specified by x.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:LEVel:REF<x>? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:LEVel:REF<x>? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:LEVel:REF<x> value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:SETHold:LEVel:REF<x> <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:SETHold:LEVel:REF<x>?

Info

<NR3> is the voltage level to use for setup & hold trigger search.

SearchSearchItemTriggerASetholdLevelChannel ¶

Bases: ValidatedChannel, SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:SETHold:LEVel:CH<x> command.

Description

This command sets or queries the voltage level to use for setup & hold trigger search. The search number is specified by x.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:LEVel:CH<x>? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:LEVel:CH<x>? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:LEVel:CH<x> value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:SETHold:LEVel:CH<x> <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:SETHold:LEVel:CH<x>?

Info

<NR3> the voltage level to use for setup & hold trigger search.

SearchSearchItemTriggerASetholdLevelMathItem ¶

Bases: ValidatedDynamicNumberCmd, SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:SETHold:LEVel:MATH<x> command.

Description

This command sets or queries the voltage level to use for setup & hold trigger search. The search number is specified by x.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:LEVel:MATH<x>? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:LEVel:MATH<x>? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:LEVel:MATH<x> value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:SETHold:LEVel:MATH<x> <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:SETHold:LEVel:MATH<x>?

Info

<NR3> isi the voltage level to use for setup & hold trigger search.

SearchSearchItemTriggerASetholdLevelRefItem ¶

Bases: ValidatedDynamicNumberCmd, SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:SETHold:LEVel:REF<x> command.

Description

This command sets or queries the voltage level to use for setup & hold trigger search. The search number is specified by x.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:LEVel:REF<x>? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:LEVel:REF<x>? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:LEVel:REF<x> value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:SETHold:LEVel:REF<x> <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:SETHold:LEVel:REF<x>?

Info

<NR3> is the voltage level to use for setup & hold trigger search.

SearchSearchItemTriggerASetholdLogicpattern ¶

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:SETHold:LOGICPattern command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:LOGICPattern? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:LOGICPattern? query and raise an AssertionError if the returned value does not match value.

Properties

.ch: The SEARCH:SEARCH<x>:TRIGger:A:SETHold:LOGICPattern:CH<x> command.
.dch: The SEARCH:SEARCH<x>:TRIGger:A:SETHold:LOGICPattern:DCH<x> command tree.
.math: The SEARCH:SEARCH<x>:TRIGger:A:SETHold:LOGICPattern:MATH<x> command.
.ref: The SEARCH:SEARCH<x>:TRIGger:A:SETHold:LOGICPattern:REF<x> command.

ch `property` ¶

ch: dict[int, SearchSearchItemTriggerASetholdLogicpatternChannel]

Return the SEARCH:SEARCH<x>:TRIGger:A:SETHold:LOGICPattern:CH<x> command.

Description

This command sets or queries the conditions used for generating an A logic pattern, with respect to the defined input pattern, and identifies the time that the selected pattern may be true and still generate the trigger. The search number is specified by x.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:LOGICPattern:CH<x>? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:LOGICPattern:CH<x>? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:LOGICPattern:CH<x> value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:SETHold:LOGICPattern:CH<x> {INCLude|DONTInclude}
- SEARCH:SEARCH<x>:TRIGger:A:SETHold:LOGICPattern:CH<x>?

Info

INCLude specifies including the specified channel SETHOLD inputs in the specified search.
DONTInclude specifies not including the specified channel SETHOLD inputs in the specified search.

dch `property` ¶

dch: dict[int, SearchSearchItemTriggerASetholdLogicpatternDchItem]

Return the SEARCH:SEARCH<x>:TRIGger:A:SETHold:LOGICPattern:DCH<x> command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:LOGICPattern:DCH<x>? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:LOGICPattern:DCH<x>? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.d: The SEARCH:SEARCH<x>:TRIGger:A:SETHold:LOGICPattern:DCH<x>_D<x> command.

math `property` ¶

math: dict[int, SearchSearchItemTriggerASetholdLogicpatternMathItem]

Return the SEARCH:SEARCH<x>:TRIGger:A:SETHold:LOGICPattern:MATH<x> command.

Description

This command sets or queries the conditions used for generating an A logic pattern, with respect to the defined input pattern, and identifies the time that the selected pattern may be true and still generate the trigger. The search number is specified by x.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:LOGICPattern:MATH<x>? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:LOGICPattern:MATH<x>? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:LOGICPattern:MATH<x> value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:SETHold:LOGICPattern:MATH<x> {INCLude|DONTInclude}
- SEARCH:SEARCH<x>:TRIGger:A:SETHold:LOGICPattern:MATH<x>?

Info

INCLude specifies including the specified math SETHOLD inputs in the specified search.
DONTInclude specifies not including the specified math SETHOLD inputs in the specified search.

ref `property` ¶

ref: dict[int, SearchSearchItemTriggerASetholdLogicpatternRefItem]

Return the SEARCH:SEARCH<x>:TRIGger:A:SETHold:LOGICPattern:REF<x> command.

Description

This command sets and returns the conditions used for generating an A logic pattern, with respect to the defined input pattern, and identifies the time that the selected pattern may be true and still generate the trigger. The search number is specified by x.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:LOGICPattern:REF<x>? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:LOGICPattern:REF<x>? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:LOGICPattern:REF<x> value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:SETHold:LOGICPattern:REF<x> {INCLude|DONTInclude}
- SEARCH:SEARCH<x>:TRIGger:A:SETHold:LOGICPattern:REF<x>?

Info

INCLude specifies including the specified reference SETHOLD inputs in the specified search.
DONTInclude specifies not including the specified reference SETHOLD inputs in the specified search.

SearchSearchItemTriggerASetholdLogicpatternChannel ¶

Bases: ValidatedChannel, SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:SETHold:LOGICPattern:CH<x> command.

Description

This command sets or queries the conditions used for generating an A logic pattern, with respect to the defined input pattern, and identifies the time that the selected pattern may be true and still generate the trigger. The search number is specified by x.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:LOGICPattern:CH<x>? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:LOGICPattern:CH<x>? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:LOGICPattern:CH<x> value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:SETHold:LOGICPattern:CH<x> {INCLude|DONTInclude}
- SEARCH:SEARCH<x>:TRIGger:A:SETHold:LOGICPattern:CH<x>?

Info

INCLude specifies including the specified channel SETHOLD inputs in the specified search.
DONTInclude specifies not including the specified channel SETHOLD inputs in the specified search.

SearchSearchItemTriggerASetholdLogicpatternDchItem ¶

Bases: ValidatedDynamicNumberCmd, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:SETHold:LOGICPattern:DCH<x> command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:LOGICPattern:DCH<x>? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:LOGICPattern:DCH<x>? query and raise an AssertionError if the returned value does not match value.

Properties

.d: The SEARCH:SEARCH<x>:TRIGger:A:SETHold:LOGICPattern:DCH<x>_D<x> command.

d `property` ¶

d: dict[int, SearchSearchItemTriggerASetholdLogicpatternDchItemDigitalBit]

Return the SEARCH:SEARCH<x>:TRIGger:A:SETHold:LOGICPattern:DCH<x>_D<x> command.

Description

This command sets or queries the conditions used for generating an A logic pattern, with respect to the defined input pattern, and identifies the time that the selected pattern may be true and still generate the trigger. The search number is specified by x. The supported digital channel value is 1. The supported digital bit values are 0 to 15.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:LOGICPattern:DCH<x>_D<x>? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:LOGICPattern:DCH<x>_D<x>? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:LOGICPattern:DCH<x>_D<x> value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:SETHold:LOGICPattern:DCH<x>_D<x> {INCLude|DONTInclude}
- SEARCH:SEARCH<x>:TRIGger:A:SETHold:LOGICPattern:DCH<x>_D<x>?

Info

INCLude specifies including the specified channel SETHOLD inputs in the specified search.
DONTInclude specifies not including the specified channel SETHOLD inputs in the specified search.

SearchSearchItemTriggerASetholdLogicpatternDchItemDigitalBit ¶

Bases: ValidatedDigitalBit, SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:SETHold:LOGICPattern:DCH<x>_D<x> command.

Description

This command sets or queries the conditions used for generating an A logic pattern, with respect to the defined input pattern, and identifies the time that the selected pattern may be true and still generate the trigger. The search number is specified by x. The supported digital channel value is 1. The supported digital bit values are 0 to 15.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:LOGICPattern:DCH<x>_D<x>? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:LOGICPattern:DCH<x>_D<x>? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:LOGICPattern:DCH<x>_D<x> value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:SETHold:LOGICPattern:DCH<x>_D<x> {INCLude|DONTInclude}
- SEARCH:SEARCH<x>:TRIGger:A:SETHold:LOGICPattern:DCH<x>_D<x>?

Info

INCLude specifies including the specified channel SETHOLD inputs in the specified search.
DONTInclude specifies not including the specified channel SETHOLD inputs in the specified search.

SearchSearchItemTriggerASetholdLogicpatternMathItem ¶

Bases: ValidatedDynamicNumberCmd, SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:SETHold:LOGICPattern:MATH<x> command.

Description

This command sets or queries the conditions used for generating an A logic pattern, with respect to the defined input pattern, and identifies the time that the selected pattern may be true and still generate the trigger. The search number is specified by x.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:LOGICPattern:MATH<x>? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:LOGICPattern:MATH<x>? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:LOGICPattern:MATH<x> value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:SETHold:LOGICPattern:MATH<x> {INCLude|DONTInclude}
- SEARCH:SEARCH<x>:TRIGger:A:SETHold:LOGICPattern:MATH<x>?

Info

INCLude specifies including the specified math SETHOLD inputs in the specified search.
DONTInclude specifies not including the specified math SETHOLD inputs in the specified search.

SearchSearchItemTriggerASetholdLogicpatternRefItem ¶

Bases: ValidatedDynamicNumberCmd, SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:SETHold:LOGICPattern:REF<x> command.

Description

This command sets and returns the conditions used for generating an A logic pattern, with respect to the defined input pattern, and identifies the time that the selected pattern may be true and still generate the trigger. The search number is specified by x.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:LOGICPattern:REF<x>? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:LOGICPattern:REF<x>? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:LOGICPattern:REF<x> value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:SETHold:LOGICPattern:REF<x> {INCLude|DONTInclude}
- SEARCH:SEARCH<x>:TRIGger:A:SETHold:LOGICPattern:REF<x>?

Info

INCLude specifies including the specified reference SETHOLD inputs in the specified search.
DONTInclude specifies not including the specified reference SETHOLD inputs in the specified search.

SearchSearchItemTriggerASetholdSettime ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:SETHold:SETTime command.

Description

This command sets or queries the setup time setting for a setup/hold trigger search to determine where to place a mark. The search number is specified by x.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:SETTime? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:SETTime? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:SETTime value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:SETHold:SETTime <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:SETHold:SETTime?

Info

<NR3> specifies the setup time for setup and hold violation triggering.

SearchSearchItemTriggerAState ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:STATE command.

Description

This command sets or queries the enabled state of the search. The search number is specified by x.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:STATE? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:STATE? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:STATE value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:STATE {ON|OFF|<NR1>}
- SEARCH:SEARCH<x>:TRIGger:A:STATE?

Info

<NR1> = 1 enables the search. Any other character disables the search.
ON enables the search.
OFF disables the search.

SearchSearchItemTriggerAStopacq ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:STOPAcq command.

Description

This command sets or queries whether acquisitions are stopped when a search hit is found. The search number is specified by x.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:STOPAcq? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:STOPAcq? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:STOPAcq value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:STOPAcq {ON|OFF|<NR1>}
- SEARCH:SEARCH<x>:TRIGger:A:STOPAcq?

Info

<x> is the number of the search on which to enable or disable the stop acquisition function.
<NR1> = 1 enables stopping when a search hit is found. Any other character disables the feature.
ON enables stopping when a search hit is found.
OFF disables stopping on a search hit.

SearchSearchItemTriggerATimeout ¶

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:TIMEOut command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:TIMEOut? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:TIMEOut? query and raise an AssertionError if the returned value does not match value.

Properties

.logicqualification: The SEARCH:SEARCH<x>:TRIGger:A:TIMEOut:LOGICQUALification command.
.polarity: The SEARCH:SEARCH<x>:TRIGger:A:TIMEOut:POLarity command.
.source: The SEARCH:SEARCH<x>:TRIGger:A:TIMEOut:SOUrce command.
.threshold: The SEARCH:SEARCH<x>:TRIGger:A:TIMEOut:THReshold command.
.time: The SEARCH:SEARCH<x>:TRIGger:A:TIMEOut:TIMe command.

logicqualification `property` ¶

logicqualification: SearchSearchItemTriggerATimeoutLogicqualification

Return the SEARCH:SEARCH<x>:TRIGger:A:TIMEOut:LOGICQUALification command.

Description

This command specifies whether or not to use logic qualification for a timeout search. The search number is specified by x.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:TIMEOut:LOGICQUALification? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:TIMEOut:LOGICQUALification? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:TIMEOut:LOGICQUALification value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:TIMEOut:LOGICQUALification {ON|OFF}
- SEARCH:SEARCH<x>:TRIGger:A:TIMEOut:LOGICQUALification?

Info

ON specifies to use logic qualification.
OFF specifies not to use logic qualification.

polarity `property` ¶

polarity: SearchSearchItemTriggerATimeoutPolarity

Return the SEARCH:SEARCH<x>:TRIGger:A:TIMEOut:POLarity command.

Description

The polarity to be used for a Timeout search. The search number is specified by x.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:TIMEOut:POLarity? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:TIMEOut:POLarity? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:TIMEOut:POLarity value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:TIMEOut:POLarity {STAYSHigh|STAYSLow|EITher}
- SEARCH:SEARCH<x>:TRIGger:A:TIMEOut:POLarity?

Info

STAYSHigh specifies the polarity stays HIGH.
STAYSLow specifies the polarity stays LOW.
EITher specifies the polarity stays HIGH or stays LOW.

source `property` ¶

source: SearchSearchItemTriggerATimeoutSource

Return the SEARCH:SEARCH<x>:TRIGger:A:TIMEOut:SOUrce command.

Description

This command sets and queries the source for timeout search input. The search number is specified by x.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:TIMEOut:SOUrce? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:TIMEOut:SOUrce? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:TIMEOut:SOUrce value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:TIMEOut:SOUrce {CH<x>|DCH<x>_D<x>|MATH<x>|REF<x>|REF<x>_D<x>}
- SEARCH:SEARCH<x>:TRIGger:A:TIMEOut:SOUrce?

Info

CH<x> specifies an input channel as the edge source, where = 1, 2, 3, 4, 5, 6, 7, or 8, depending on the number of channels in your instrument.
DCH<x>_D<x> specifies a digital channel for the search source. The supported digital channel value is 1. The supported digital bit values are 0 to 15.
MATH<x> specifies the math waveform as the search source, where = ≥1.
REF<x> specifies the reference waveform as the search source, where = ≥1.
REF<x>_D<x> specifies a digital reference waveform as the source waveform the specified search.

threshold `property` ¶

threshold: SearchSearchItemTriggerATimeoutThreshold

Return the SEARCH:SEARCH<x>:TRIGger:A:TIMEOut:THReshold command.

Description

Sets or queries the source threshold level for a timeout trigger search to determine where to place a mark. The search number is specified by x.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:TIMEOut:THReshold? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:TIMEOut:THReshold? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:TIMEOut:THReshold value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:TIMEOut:THReshold <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:TIMEOut:THReshold?

Info

<NR3> is the source threshold level for a timeout trigger search.

time `property` ¶

time: SearchSearchItemTriggerATimeoutTime

Return the SEARCH:SEARCH<x>:TRIGger:A:TIMEOut:TIMe command.

Description

This command sets or queries the time setting for a timeout trigger search to determine where to place a mark. The search number is specified by x.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:TIMEOut:TIMe? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:TIMEOut:TIMe? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:TIMEOut:TIMe value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:TIMEOut:TIMe <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:TIMEOut:TIMe?

Info

<NR3> is the time in seconds.

SearchSearchItemTriggerATimeoutLogicqualification ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:TIMEOut:LOGICQUALification command.

Description

This command specifies whether or not to use logic qualification for a timeout search. The search number is specified by x.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:TIMEOut:LOGICQUALification? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:TIMEOut:LOGICQUALification? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:TIMEOut:LOGICQUALification value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:TIMEOut:LOGICQUALification {ON|OFF}
- SEARCH:SEARCH<x>:TRIGger:A:TIMEOut:LOGICQUALification?

Info

ON specifies to use logic qualification.
OFF specifies not to use logic qualification.

SearchSearchItemTriggerATimeoutPolarity ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:TIMEOut:POLarity command.

Description

The polarity to be used for a Timeout search. The search number is specified by x.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:TIMEOut:POLarity? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:TIMEOut:POLarity? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:TIMEOut:POLarity value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:TIMEOut:POLarity {STAYSHigh|STAYSLow|EITher}
- SEARCH:SEARCH<x>:TRIGger:A:TIMEOut:POLarity?

Info

STAYSHigh specifies the polarity stays HIGH.
STAYSLow specifies the polarity stays LOW.
EITher specifies the polarity stays HIGH or stays LOW.

SearchSearchItemTriggerATimeoutSource ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:TIMEOut:SOUrce command.

Description

This command sets and queries the source for timeout search input. The search number is specified by x.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:TIMEOut:SOUrce? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:TIMEOut:SOUrce? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:TIMEOut:SOUrce value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:TIMEOut:SOUrce {CH<x>|DCH<x>_D<x>|MATH<x>|REF<x>|REF<x>_D<x>}
- SEARCH:SEARCH<x>:TRIGger:A:TIMEOut:SOUrce?

Info

CH<x> specifies an input channel as the edge source, where = 1, 2, 3, 4, 5, 6, 7, or 8, depending on the number of channels in your instrument.
DCH<x>_D<x> specifies a digital channel for the search source. The supported digital channel value is 1. The supported digital bit values are 0 to 15.
MATH<x> specifies the math waveform as the search source, where = ≥1.
REF<x> specifies the reference waveform as the search source, where = ≥1.
REF<x>_D<x> specifies a digital reference waveform as the source waveform the specified search.

SearchSearchItemTriggerATimeoutThreshold ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:TIMEOut:THReshold command.

Description

Sets or queries the source threshold level for a timeout trigger search to determine where to place a mark. The search number is specified by x.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:TIMEOut:THReshold? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:TIMEOut:THReshold? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:TIMEOut:THReshold value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:TIMEOut:THReshold <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:TIMEOut:THReshold?

Info

<NR3> is the source threshold level for a timeout trigger search.

SearchSearchItemTriggerATimeoutTime ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:TIMEOut:TIMe command.

Description

This command sets or queries the time setting for a timeout trigger search to determine where to place a mark. The search number is specified by x.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:TIMEOut:TIMe? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:TIMEOut:TIMe? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:TIMEOut:TIMe value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:TIMEOut:TIMe <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:TIMEOut:TIMe?

Info

<NR3> is the time in seconds.

SearchSearchItemTriggerAType ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:TYPe command.

Description

This command sets or queries the trigger type setting for a search to determine where to place a mark. The search number is specified by x.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:TYPe? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:TYPe? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:TYPe value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:TYPe {EDGE|RUNT|TRANsition|PULSEWidth|TIMEOut|LOGIc|SETHold|Bus}
- SEARCH:SEARCH<x>:TRIGger:A:TYPe?

Info

EDGE triggers when the source input signal amplitude crosses the specified level in the direction given by the slope.
RUNT triggers when a pulse crosses the first preset voltage threshold but does not cross the second preset threshold before recrossing the first. The thresholds are set with the SEARCH:SEARCH<x>:TRIGger:A:RUNt:HIGH and SEARCH:SEARCH<x>:TRIGger:A:RUNt:LOW THRESHOLD commands.
TRANsition triggers when a pulse crosses both thresholds in the same direction as the specified polarity and the transition time between the two threshold crossings is greater or less than the specified time delta.
PULSEWidth triggers on input signal source pulses that are inside or outside of the given time range specified by SEARCH:SEARCH<x>:TRIGger:A:LOGIc:PATtern:WHEn:LESSLimit and SEARCH:SEARCH<x>:TRIGger:A:LOGIc:PATtern:WHEn:MORELimit. The polarity is selected using the SEARCH:SEARCH<x>:TRIGger:A:RUNT: POLarity command.
TIMEOut triggers on an input signal source that stays above, stays below, or stays either above or beow the trigger level for a given time.
LOGIc specifies that a search occurs when specified conditions are met, and is controlled by the SEARCH:A:LOGIc commands.
SETHold triggers on a functional pattern combination of one to three data sources at the time of the clock transition.
Bus specifies that a search occurs when a communications signal is found.

SearchSelected ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SELected command.

Description

This command sets or queries the selected search, for example SEARCH1. The search number is specified by x.

Usage

Using the .query() method will send the SEARCH:SELected? query.
Using the .verify(value) method will send the SEARCH:SELected? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SELected value command.

SCPI Syntax

- SEARCH:SELected SEARCH1
- SEARCH:SELected?

Info

SEARCH1 is the specified search.

search ¶

Search ¶

addnew property ¶

delete property ¶

deleteall property ¶

list property ¶

search property ¶

selected property ¶

SearchAddnew ¶

SearchDelete ¶

SearchDeleteall ¶

SearchList ¶

SearchSearchItem ¶

copy property ¶

navigate property ¶

total property ¶

trigger property ¶

SearchSearchItemCopy ¶

SearchSearchItemNavigate ¶

SearchSearchItemTotal ¶

SearchSearchItemTrigger ¶

a property ¶

SearchSearchItemTriggerA ¶

bus property ¶

edge property ¶

logic property ¶

pulsewidth property ¶

runt property ¶

sethold property ¶

state property ¶

stopacq property ¶

timeout property ¶

type property ¶

SearchSearchItemTriggerABus ¶

can property ¶

i2c property ¶

lin property ¶

parallel property ¶

rs232c property ¶

sent property ¶

source property ¶

spi property ¶

SearchSearchItemTriggerABusCan ¶

condition property ¶

data property ¶

errtype property ¶

fd property ¶

frametype property ¶

identifier property ¶

SearchSearchItemTriggerABusCanCondition ¶

SearchSearchItemTriggerABusCanData ¶

direction property ¶

offset property ¶

qualifier property ¶

size property ¶

value property ¶

SearchSearchItemTriggerABusCanDataDirection ¶

SearchSearchItemTriggerABusCanDataOffset ¶

SearchSearchItemTriggerABusCanDataQualifier ¶

SearchSearchItemTriggerABusCanDataSize ¶

SearchSearchItemTriggerABusCanDataValue ¶

SearchSearchItemTriggerABusCanErrtype ¶

SearchSearchItemTriggerABusCanFd ¶

brsbit property ¶

esibit property ¶

SearchSearchItemTriggerABusCanFdBrsbit ¶

SearchSearchItemTriggerABusCanFdEsibit ¶

SearchSearchItemTriggerABusCanFrametype ¶

SearchSearchItemTriggerABusCanIdentifier ¶

mode property ¶

value property ¶

SearchSearchItemTriggerABusCanIdentifierMode ¶

SearchSearchItemTriggerABusCanIdentifierValue ¶

SearchSearchItemTriggerABusI2c ¶

address property ¶

condition property ¶

data property ¶

SearchSearchItemTriggerABusI2cAddress ¶

mode property ¶

value property ¶

addnew `property` ¶

delete `property` ¶

deleteall `property` ¶

list `property` ¶

search `property` ¶

selected `property` ¶

copy `property` ¶

navigate `property` ¶

total `property` ¶

trigger `property` ¶

a `property` ¶

bus `property` ¶

edge `property` ¶

logic `property` ¶

pulsewidth `property` ¶

runt `property` ¶

sethold `property` ¶

state `property` ¶

stopacq `property` ¶

timeout `property` ¶

type `property` ¶

can `property` ¶

i2c `property` ¶

lin `property` ¶

parallel `property` ¶

rs232c `property` ¶

sent `property` ¶

source `property` ¶

spi `property` ¶

condition `property` ¶

data `property` ¶

errtype `property` ¶

fd `property` ¶

frametype `property` ¶

identifier `property` ¶

direction `property` ¶

offset `property` ¶

qualifier `property` ¶

size `property` ¶

value `property` ¶

brsbit `property` ¶

esibit `property` ¶

mode `property` ¶

value `property` ¶

address `property` ¶

condition `property` ¶

data `property` ¶

mode `property` ¶

value `property` ¶

direction `property` ¶

size `property` ¶

value `property` ¶

condition `property` ¶

data `property` ¶

errtype `property` ¶

identifier `property` ¶

hivalue `property` ¶

qualifier `property` ¶

size `property` ¶

value `property` ¶

value `property` ¶

data `property` ¶

value `property` ¶

condition `property` ¶

data `property` ¶

size `property` ¶

value `property` ¶

condition `property` ¶

errtype `property` ¶

fast `property` ¶

pause `property` ¶

slow `property` ¶

crc `property` ¶

chan1a `property` ¶

chan2b `property` ¶

counter `property` ¶

invertnibble `property` ¶

status `property` ¶

hivalue `property` ¶

qualifier `property` ¶