[python source code]

source

The source commands module.

These commands are used in the following models: AWG5K, AWG5KC, AWG7K, AWG7KC

THIS FILE IS AUTO-GENERATED, IT SHOULD NOT BE MANUALLY MODIFIED.

Please report an issue if one is found.

Commands and Queries 
- SOURce[n]:COMBine:FEED {'ESIGnal'|''}
- SOURce[n]:COMBine:FEED?
- SOURce[n]:DAC:RESolution <NR1>
- SOURce[n]:DAC:RESolution?
- SOURce[n]:DELay:ADJust <NR3>
- SOURce[n]:DELay:ADJust?
- SOURce[n]:DELay:POINts <NR3>
- SOURce[n]:DELay:POINts?
- SOURce[n]:DIGital:VOLTage:LEVel:IMMediate:AMPLitude <NR3>
- SOURce[n]:DIGital:VOLTage:LEVel:IMMediate:AMPLitude?
- SOURce[n]:DIGital:VOLTage:LEVel:IMMediate:HIGH <NR3>
- SOURce[n]:DIGital:VOLTage:LEVel:IMMediate:HIGH?
- SOURce[n]:DIGital:VOLTage:LEVel:IMMediate:LOW <NR3>
- SOURce[n]:DIGital:VOLTage:LEVel:IMMediate:LOW?
- SOURce[n]:DIGital:VOLTage:LEVel:IMMediate:OFFSet <NR3>
- SOURce[n]:DIGital:VOLTage:LEVel:IMMediate:OFFSet?
- SOURce[n]:FREQuency:CW <NR3>
- SOURce[n]:FREQuency:CW?
- SOURce[n]:FREQuency:FIXed <NR3>
- SOURce[n]:FREQuency:FIXed?
- SOURce[n]:FUNCtion:USER <Waveform file_name>[,<msus>]
- SOURce[n]:FUNCtion:USER?
- SOURce[n]:MARKer1:DELay <NR3>
- SOURce[n]:MARKer1:DELay?
- SOURce[n]:MARKer1:VOLTage:LEVel:IMMediate:AMPLitude <NR3>
- SOURce[n]:MARKer1:VOLTage:LEVel:IMMediate:AMPLitude?
- SOURce[n]:MARKer1:VOLTage:LEVel:IMMediate:HIGH <NR3>
- SOURce[n]:MARKer1:VOLTage:LEVel:IMMediate:HIGH?
- SOURce[n]:MARKer1:VOLTage:LEVel:IMMediate:LOW <NR3>
- SOURce[n]:MARKer1:VOLTage:LEVel:IMMediate:LOW?
- SOURce[n]:MARKer1:VOLTage:LEVel:IMMediate:OFFSet <NR3>
- SOURce[n]:MARKer1:VOLTage:LEVel:IMMediate:OFFSet?
- SOURce[n]:MARKer2:DELay <NR3>
- SOURce[n]:MARKer2:DELay?
- SOURce[n]:MARKer2:VOLTage:LEVel:IMMediate:AMPLitude <NR3>
- SOURce[n]:MARKer2:VOLTage:LEVel:IMMediate:AMPLitude?
- SOURce[n]:MARKer2:VOLTage:LEVel:IMMediate:HIGH <NR3>
- SOURce[n]:MARKer2:VOLTage:LEVel:IMMediate:HIGH?
- SOURce[n]:MARKer2:VOLTage:LEVel:IMMediate:LOW <NR3>
- SOURce[n]:MARKer2:VOLTage:LEVel:IMMediate:LOW?
- SOURce[n]:MARKer2:VOLTage:LEVel:IMMediate:OFFSet <NR3>
- SOURce[n]:MARKer2:VOLTage:LEVel:IMMediate:OFFSet?
- SOURce[n]:PDELay:HOLD {PHASe|DELay|POINt}
- SOURce[n]:PDELay:HOLD?
- SOURce[n]:PHASe:ADJust <NR3>
- SOURce[n]:PHASe:ADJust?
- SOURce[n]:ROSCillator:FREQuency <NR3>
- SOURce[n]:ROSCillator:FREQuency?
- SOURce[n]:ROSCillator:MULTiplier <NR1>
- SOURce[n]:ROSCillator:MULTiplier?
- SOURce[n]:ROSCillator:SOURce {INTernal|EXTernal}
- SOURce[n]:ROSCillator:SOURce?
- SOURce[n]:ROSCillator:TYPE {FIXed|VARiable}
- SOURce[n]:ROSCillator:TYPE?
- SOURce[n]:SKEW <NR3>
- SOURce[n]:SKEW?
- SOURce[n]:VOLTage:LEVel:IMMediate:AMPLitude <NR3>
- SOURce[n]:VOLTage:LEVel:IMMediate:AMPLitude?
- SOURce[n]:VOLTage:LEVel:IMMediate:HIGH <NR3>
- SOURce[n]:VOLTage:LEVel:IMMediate:HIGH?
- SOURce[n]:VOLTage:LEVel:IMMediate:LOW <NR3>
- SOURce[n]:VOLTage:LEVel:IMMediate:LOW?
- SOURce[n]:VOLTage:LEVel:IMMediate:OFFSet <NR3>
- SOURce[n]:VOLTage:LEVel:IMMediate:OFFSet?
- SOURce[n]:WAVeform <wfm_name>
- SOURce[n]:WAVeform?

SourceItem

Bases: ValidatedChannel, SCPICmdRead

The SOURce[n] command tree.

Usage
  • Using the .query() method will send the SOURce[n]? query.
  • Using the .verify(value) method will send the SOURce[n]? query and raise an AssertionError if the returned value does not match value.
Properties
  • .frequency: The SOURce[n]:FREQuency command tree.
  • .roscillator: The SOURce[n]:ROSCillator command tree.
  • .combine: The SOURce[n]:COMBine command tree.
  • .dac: The SOURce[n]:DAC command tree.
  • .delay: The SOURce[n]:DELay command tree.
  • .digital: The SOURce[n]:DIGital command tree.
  • .function: The SOURce[n]:FUNCtion command tree.
  • .marker1: The SOURce[n]:MARKer1 command tree.
  • .marker2: The SOURce[n]:MARKer2 command tree.
  • .pdelay: The SOURce[n]:PDELay command tree.
  • .phase: The SOURce[n]:PHASe command tree.
  • .skew: The SOURce[n]:SKEW command.
  • .voltage: The SOURce[n]:VOLTage command tree.
  • .waveform: The SOURce[n]:WAVeform command.

combine property 

combine: SourceItemCombine

Return the SOURce[n]:COMBine command tree.

Usage
  • Using the .query() method will send the SOURce[n]:COMBine? query.
  • Using the .verify(value) method will send the SOURce[n]:COMBine? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .feed: The SOURce[n]:COMBine:FEED command.

dac property 

dac: SourceItemDac

Return the SOURce[n]:DAC command tree.

Usage
  • Using the .query() method will send the SOURce[n]:DAC? query.
  • Using the .verify(value) method will send the SOURce[n]:DAC? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .resolution: The SOURce[n]:DAC:RESolution command.

delay property 

delay: SourceItemDelay

Return the SOURce[n]:DELay command tree.

Usage
  • Using the .query() method will send the SOURce[n]:DELay? query.
  • Using the .verify(value) method will send the SOURce[n]:DELay? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .points: The SOURce[n]:DELay:POINts command.
  • .adjust: The SOURce[n]:DELay:ADJust command.

digital property 

digital: SourceItemDigital

Return the SOURce[n]:DIGital command tree.

Usage
  • Using the .query() method will send the SOURce[n]:DIGital? query.
  • Using the .verify(value) method will send the SOURce[n]:DIGital? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .voltage: The SOURce[n]:DIGital:VOLTage command tree.

frequency property 

frequency: SourceItemFrequency

Return the SOURce[n]:FREQuency command tree.

Usage
  • Using the .query() method will send the SOURce[n]:FREQuency? query.
  • Using the .verify(value) method will send the SOURce[n]:FREQuency? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .cw: The SOURce[n]:FREQuency:CW command.
  • .fixed: The SOURce[n]:FREQuency:FIXed command.

function property 

function: SourceItemFunction

Return the SOURce[n]:FUNCtion command tree.

Usage
  • Using the .query() method will send the SOURce[n]:FUNCtion? query.
  • Using the .verify(value) method will send the SOURce[n]:FUNCtion? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .user: The SOURce[n]:FUNCtion:USER command.

marker1 property 

marker1: SourceItemMarker1

Return the SOURce[n]:MARKer1 command tree.

Usage
  • Using the .query() method will send the SOURce[n]:MARKer1? query.
  • Using the .verify(value) method will send the SOURce[n]:MARKer1? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .delay: The SOURce[n]:MARKer1:DELay command.
  • .voltage: The SOURce[n]:MARKer1:VOLTage command tree.

marker2 property 

marker2: SourceItemMarker2

Return the SOURce[n]:MARKer2 command tree.

Usage
  • Using the .query() method will send the SOURce[n]:MARKer2? query.
  • Using the .verify(value) method will send the SOURce[n]:MARKer2? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .delay: The SOURce[n]:MARKer2:DELay command.
  • .voltage: The SOURce[n]:MARKer2:VOLTage command tree.

pdelay property 

pdelay: SourceItemPdelay

Return the SOURce[n]:PDELay command tree.

Usage
  • Using the .query() method will send the SOURce[n]:PDELay? query.
  • Using the .verify(value) method will send the SOURce[n]:PDELay? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .hold: The SOURce[n]:PDELay:HOLD command.

phase property 

phase: SourceItemPhase

Return the SOURce[n]:PHASe command tree.

Usage
  • Using the .query() method will send the SOURce[n]:PHASe? query.
  • Using the .verify(value) method will send the SOURce[n]:PHASe? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .adjust: The SOURce[n]:PHASe:ADJust command.

roscillator property 

roscillator: SourceItemRoscillator

Return the SOURce[n]:ROSCillator command tree.

Usage
  • Using the .query() method will send the SOURce[n]:ROSCillator? query.
  • Using the .verify(value) method will send the SOURce[n]:ROSCillator? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .frequency: The SOURce[n]:ROSCillator:FREQuency command.
  • .multiplier: The SOURce[n]:ROSCillator:MULTiplier command.
  • .source: The SOURce[n]:ROSCillator:SOURce command.
  • .type: The SOURce[n]:ROSCillator:TYPE command.

skew property 

skew: SourceItemSkew

Return the SOURce[n]:SKEW command.

Description
  • This command and query sets or returns the skew for the waveform associated with a channel.
Usage
  • Using the .query() method will send the SOURce[n]:SKEW? query.
  • Using the .verify(value) method will send the SOURce[n]:SKEW? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SOURce[n]:SKEW value command.
SCPI Syntax 
- SOURce[n]:SKEW <NR3>
- SOURce[n]:SKEW?
Info
  • <NR3>

voltage property 

voltage: SourceItemVoltage

Return the SOURce[n]:VOLTage command tree.

Usage
  • Using the .query() method will send the SOURce[n]:VOLTage? query.
  • Using the .verify(value) method will send the SOURce[n]:VOLTage? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .level: The SOURce[n]:VOLTage:LEVel command tree.

waveform property 

waveform: SourceItemWaveform

Return the SOURce[n]:WAVeform command.

Description
  • This command and query sets or returns the output waveform from the current waveform list for each channel when Run Mode is not Sequence. However, this command cannot be used to load a waveform stored in an AWG400/500/600/700 waveform or pattern file. To load a waveform stored in an AWG400/500/600/700 waveform or pattern file, use the SOURCEN:FUNCTION:USER command.
Usage
  • Using the .query() method will send the SOURce[n]:WAVeform? query.
  • Using the .verify(value) method will send the SOURce[n]:WAVeform? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SOURce[n]:WAVeform value command.
SCPI Syntax 
- SOURce[n]:WAVeform <wfm_name>
- SOURce[n]:WAVeform?
Info
  • <wfm_name> ::=.

SourceItemCombine

Bases: SCPICmdRead

The SOURce[n]:COMBine command tree.

Usage
  • Using the .query() method will send the SOURce[n]:COMBine? query.
  • Using the .verify(value) method will send the SOURce[n]:COMBine? query and raise an AssertionError if the returned value does not match value.
Properties
  • .feed: The SOURce[n]:COMBine:FEED command.

feed property 

feed: SourceItemCombineFeed

Return the SOURce[n]:COMBine:FEED command.

Description
  • (AWG5000 Series only) This command adds the signal from an external input to the output of the channel.
Usage
  • Using the .query() method will send the SOURce[n]:COMBine:FEED? query.
  • Using the .verify(value) method will send the SOURce[n]:COMBine:FEED? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SOURce[n]:COMBine:FEED value command.
SCPI Syntax 
- SOURce[n]:COMBine:FEED {'ESIGnal'|''}
- SOURce[n]:COMBine:FEED?
Info
  • 'ESIGnal' - Adds the input from the external signal.
  • '' - Removes the signal feed.

SourceItemCombineFeed

Bases: SCPICmdWrite, SCPICmdRead

The SOURce[n]:COMBine:FEED command.

Description
  • (AWG5000 Series only) This command adds the signal from an external input to the output of the channel.
Usage
  • Using the .query() method will send the SOURce[n]:COMBine:FEED? query.
  • Using the .verify(value) method will send the SOURce[n]:COMBine:FEED? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SOURce[n]:COMBine:FEED value command.
SCPI Syntax 
- SOURce[n]:COMBine:FEED {'ESIGnal'|''}
- SOURce[n]:COMBine:FEED?
Info
  • 'ESIGnal' - Adds the input from the external signal.
  • '' - Removes the signal feed.

SourceItemDac

Bases: SCPICmdRead

The SOURce[n]:DAC command tree.

Usage
  • Using the .query() method will send the SOURce[n]:DAC? query.
  • Using the .verify(value) method will send the SOURce[n]:DAC? query and raise an AssertionError if the returned value does not match value.
Properties
  • .resolution: The SOURce[n]:DAC:RESolution command.

resolution property 

resolution: SourceItemDacResolution

Return the SOURce[n]:DAC:RESolution command.

Description
  • This command and query sets or returns the DAC resolution.
Usage
  • Using the .query() method will send the SOURce[n]:DAC:RESolution? query.
  • Using the .verify(value) method will send the SOURce[n]:DAC:RESolution? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SOURce[n]:DAC:RESolution value command.
SCPI Syntax 
- SOURce[n]:DAC:RESolution <NR1>
- SOURce[n]:DAC:RESolution?
Info
  • <NR1>
  • 8 sets the DAC resolution to 8 bits.
  • 10 sets the DAC resolution to 10 bits.

SourceItemDacResolution

Bases: SCPICmdWrite, SCPICmdRead

The SOURce[n]:DAC:RESolution command.

Description
  • This command and query sets or returns the DAC resolution.
Usage
  • Using the .query() method will send the SOURce[n]:DAC:RESolution? query.
  • Using the .verify(value) method will send the SOURce[n]:DAC:RESolution? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SOURce[n]:DAC:RESolution value command.
SCPI Syntax 
- SOURce[n]:DAC:RESolution <NR1>
- SOURce[n]:DAC:RESolution?
Info
  • <NR1>
  • 8 sets the DAC resolution to 8 bits.
  • 10 sets the DAC resolution to 10 bits.

SourceItemDelay

Bases: SCPICmdRead

The SOURce[n]:DELay command tree.

Usage
  • Using the .query() method will send the SOURce[n]:DELay? query.
  • Using the .verify(value) method will send the SOURce[n]:DELay? query and raise an AssertionError if the returned value does not match value.
Properties
  • .points: The SOURce[n]:DELay:POINts command.
  • .adjust: The SOURce[n]:DELay:ADJust command.

adjust property 

adjust: SourceItemDelayAdjust

Return the SOURce[n]:DELay:ADJust command.

Description
  • This command and query sets or returns the delay (in seconds) of the analog output.
Usage
  • Using the .query() method will send the SOURce[n]:DELay:ADJust? query.
  • Using the .verify(value) method will send the SOURce[n]:DELay:ADJust? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SOURce[n]:DELay:ADJust value command.
SCPI Syntax 
- SOURce[n]:DELay:ADJust <NR3>
- SOURce[n]:DELay:ADJust?
Info
  • <NR3>

points property 

points: SourceItemDelayPoints

Return the SOURce[n]:DELay:POINts command.

Description
  • This command and query sets or returns the delay (in points) of the analog output.
Usage
  • Using the .query() method will send the SOURce[n]:DELay:POINts? query.
  • Using the .verify(value) method will send the SOURce[n]:DELay:POINts? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SOURce[n]:DELay:POINts value command.
SCPI Syntax 
- SOURce[n]:DELay:POINts <NR3>
- SOURce[n]:DELay:POINts?
Info
  • <NR3>

SourceItemDelayAdjust

Bases: SCPICmdWrite, SCPICmdRead

The SOURce[n]:DELay:ADJust command.

Description
  • This command and query sets or returns the delay (in seconds) of the analog output.
Usage
  • Using the .query() method will send the SOURce[n]:DELay:ADJust? query.
  • Using the .verify(value) method will send the SOURce[n]:DELay:ADJust? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SOURce[n]:DELay:ADJust value command.
SCPI Syntax 
- SOURce[n]:DELay:ADJust <NR3>
- SOURce[n]:DELay:ADJust?
Info
  • <NR3>

SourceItemDelayPoints

Bases: SCPICmdWrite, SCPICmdRead

The SOURce[n]:DELay:POINts command.

Description
  • This command and query sets or returns the delay (in points) of the analog output.
Usage
  • Using the .query() method will send the SOURce[n]:DELay:POINts? query.
  • Using the .verify(value) method will send the SOURce[n]:DELay:POINts? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SOURce[n]:DELay:POINts value command.
SCPI Syntax 
- SOURce[n]:DELay:POINts <NR3>
- SOURce[n]:DELay:POINts?
Info
  • <NR3>

SourceItemDigital

Bases: SCPICmdRead

The SOURce[n]:DIGital command tree.

Usage
  • Using the .query() method will send the SOURce[n]:DIGital? query.
  • Using the .verify(value) method will send the SOURce[n]:DIGital? query and raise an AssertionError if the returned value does not match value.
Properties
  • .voltage: The SOURce[n]:DIGital:VOLTage command tree.

voltage property 

voltage: SourceItemDigitalVoltage

Return the SOURce[n]:DIGital:VOLTage command tree.

Usage
  • Using the .query() method will send the SOURce[n]:DIGital:VOLTage? query.
  • Using the .verify(value) method will send the SOURce[n]:DIGital:VOLTage? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .level: The SOURce[n]:DIGital:VOLTage:LEVel command tree.

SourceItemDigitalVoltage

Bases: SCPICmdRead

The SOURce[n]:DIGital:VOLTage command tree.

Usage
  • Using the .query() method will send the SOURce[n]:DIGital:VOLTage? query.
  • Using the .verify(value) method will send the SOURce[n]:DIGital:VOLTage? query and raise an AssertionError if the returned value does not match value.
Properties
  • .level: The SOURce[n]:DIGital:VOLTage:LEVel command tree.

level property 

level: SourceItemDigitalVoltageLevel

Return the SOURce[n]:DIGital:VOLTage:LEVel command tree.

Usage
  • Using the .query() method will send the SOURce[n]:DIGital:VOLTage:LEVel? query.
  • Using the .verify(value) method will send the SOURce[n]:DIGital:VOLTage:LEVel? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .immediate: The SOURce[n]:DIGital:VOLTage:LEVel:IMMediate command tree.

SourceItemDigitalVoltageLevel

Bases: SCPICmdRead

The SOURce[n]:DIGital:VOLTage:LEVel command tree.

Usage
  • Using the .query() method will send the SOURce[n]:DIGital:VOLTage:LEVel? query.
  • Using the .verify(value) method will send the SOURce[n]:DIGital:VOLTage:LEVel? query and raise an AssertionError if the returned value does not match value.
Properties
  • .immediate: The SOURce[n]:DIGital:VOLTage:LEVel:IMMediate command tree.

immediate property 

immediate: SourceItemDigitalVoltageLevelImmediate

Return the SOURce[n]:DIGital:VOLTage:LEVel:IMMediate command tree.

Usage
  • Using the .query() method will send the SOURce[n]:DIGital:VOLTage:LEVel:IMMediate? query.
  • Using the .verify(value) method will send the SOURce[n]:DIGital:VOLTage:LEVel:IMMediate? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .high: The SOURce[n]:DIGital:VOLTage:LEVel:IMMediate:HIGH command.
  • .low: The SOURce[n]:DIGital:VOLTage:LEVel:IMMediate:LOW command.
  • .offset: The SOURce[n]:DIGital:VOLTage:LEVel:IMMediate:OFFSet command.
  • .amplitude: The SOURce[n]:DIGital:VOLTage:LEVel:IMMediate:AMPLitude command.

SourceItemDigitalVoltageLevelImmediate

Bases: SCPICmdRead

The SOURce[n]:DIGital:VOLTage:LEVel:IMMediate command tree.

Usage
  • Using the .query() method will send the SOURce[n]:DIGital:VOLTage:LEVel:IMMediate? query.
  • Using the .verify(value) method will send the SOURce[n]:DIGital:VOLTage:LEVel:IMMediate? query and raise an AssertionError if the returned value does not match value.
Properties
  • .high: The SOURce[n]:DIGital:VOLTage:LEVel:IMMediate:HIGH command.
  • .low: The SOURce[n]:DIGital:VOLTage:LEVel:IMMediate:LOW command.
  • .offset: The SOURce[n]:DIGital:VOLTage:LEVel:IMMediate:OFFSet command.
  • .amplitude: The SOURce[n]:DIGital:VOLTage:LEVel:IMMediate:AMPLitude command.

amplitude property 

amplitude: SourceItemDigitalVoltageLevelImmediateAmplitude

Return the SOURce[n]:DIGital:VOLTage:LEVel:IMMediate:AMPLitude command.

Description
  • (AWG5000 Series only) This command and query sets or returns the amplitude of digital output. This command is available only for AWG500B and AWG5000C instruments with option 03.
Usage
  • Using the .query() method will send the SOURce[n]:DIGital:VOLTage:LEVel:IMMediate:AMPLitude? query.
  • Using the .verify(value) method will send the SOURce[n]:DIGital:VOLTage:LEVel:IMMediate:AMPLitude? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SOURce[n]:DIGital:VOLTage:LEVel:IMMediate:AMPLitude value command.
SCPI Syntax 
- SOURce[n]:DIGital:VOLTage:LEVel:IMMediate:AMPLitude <NR3>
- SOURce[n]:DIGital:VOLTage:LEVel:IMMediate:AMPLitude?
Info
  • <NR3>
  • pp

high property 

high: SourceItemDigitalVoltageLevelImmediateHigh

Return the SOURce[n]:DIGital:VOLTage:LEVel:IMMediate:HIGH command.

Description
  • (AWG5000 Series only) This command and query sets or returns the high digital output. This command is available only for AWG5000B and AWG5000C instruments with option 03.
Usage
  • Using the .query() method will send the SOURce[n]:DIGital:VOLTage:LEVel:IMMediate:HIGH? query.
  • Using the .verify(value) method will send the SOURce[n]:DIGital:VOLTage:LEVel:IMMediate:HIGH? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SOURce[n]:DIGital:VOLTage:LEVel:IMMediate:HIGH value command.
SCPI Syntax 
- SOURce[n]:DIGital:VOLTage:LEVel:IMMediate:HIGH <NR3>
- SOURce[n]:DIGital:VOLTage:LEVel:IMMediate:HIGH?
Info
  • <NR3>

low property 

low: SourceItemDigitalVoltageLevelImmediateLow

Return the SOURce[n]:DIGital:VOLTage:LEVel:IMMediate:LOW command.

Description
  • (AWG5000 Series only) This command and query sets or returns the low digital output. This command is available only for AWG5000B and AWG5000C instruments with option 03.
Usage
  • Using the .query() method will send the SOURce[n]:DIGital:VOLTage:LEVel:IMMediate:LOW? query.
  • Using the .verify(value) method will send the SOURce[n]:DIGital:VOLTage:LEVel:IMMediate:LOW? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SOURce[n]:DIGital:VOLTage:LEVel:IMMediate:LOW value command.
SCPI Syntax 
- SOURce[n]:DIGital:VOLTage:LEVel:IMMediate:LOW <NR3>
- SOURce[n]:DIGital:VOLTage:LEVel:IMMediate:LOW?
Info
  • <NR3>

offset property 

offset: SourceItemDigitalVoltageLevelImmediateOffset

Return the SOURce[n]:DIGital:VOLTage:LEVel:IMMediate:OFFSet command.

Description
  • (AWG5000 Series only) This command and query sets or returns the offset of digital output. This command is available only for AWG5000B and AWG5000C instruments with option 03.
Usage
  • Using the .query() method will send the SOURce[n]:DIGital:VOLTage:LEVel:IMMediate:OFFSet? query.
  • Using the .verify(value) method will send the SOURce[n]:DIGital:VOLTage:LEVel:IMMediate:OFFSet? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SOURce[n]:DIGital:VOLTage:LEVel:IMMediate:OFFSet value command.
SCPI Syntax 
- SOURce[n]:DIGital:VOLTage:LEVel:IMMediate:OFFSet <NR3>
- SOURce[n]:DIGital:VOLTage:LEVel:IMMediate:OFFSet?
Info
  • <NR3>

SourceItemDigitalVoltageLevelImmediateAmplitude

Bases: SCPICmdWrite, SCPICmdRead

The SOURce[n]:DIGital:VOLTage:LEVel:IMMediate:AMPLitude command.

Description
  • (AWG5000 Series only) This command and query sets or returns the amplitude of digital output. This command is available only for AWG500B and AWG5000C instruments with option 03.
Usage
  • Using the .query() method will send the SOURce[n]:DIGital:VOLTage:LEVel:IMMediate:AMPLitude? query.
  • Using the .verify(value) method will send the SOURce[n]:DIGital:VOLTage:LEVel:IMMediate:AMPLitude? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SOURce[n]:DIGital:VOLTage:LEVel:IMMediate:AMPLitude value command.
SCPI Syntax 
- SOURce[n]:DIGital:VOLTage:LEVel:IMMediate:AMPLitude <NR3>
- SOURce[n]:DIGital:VOLTage:LEVel:IMMediate:AMPLitude?
Info
  • <NR3>
  • pp

SourceItemDigitalVoltageLevelImmediateHigh

Bases: SCPICmdWrite, SCPICmdRead

The SOURce[n]:DIGital:VOLTage:LEVel:IMMediate:HIGH command.

Description
  • (AWG5000 Series only) This command and query sets or returns the high digital output. This command is available only for AWG5000B and AWG5000C instruments with option 03.
Usage
  • Using the .query() method will send the SOURce[n]:DIGital:VOLTage:LEVel:IMMediate:HIGH? query.
  • Using the .verify(value) method will send the SOURce[n]:DIGital:VOLTage:LEVel:IMMediate:HIGH? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SOURce[n]:DIGital:VOLTage:LEVel:IMMediate:HIGH value command.
SCPI Syntax 
- SOURce[n]:DIGital:VOLTage:LEVel:IMMediate:HIGH <NR3>
- SOURce[n]:DIGital:VOLTage:LEVel:IMMediate:HIGH?
Info
  • <NR3>

SourceItemDigitalVoltageLevelImmediateLow

Bases: SCPICmdWrite, SCPICmdRead

The SOURce[n]:DIGital:VOLTage:LEVel:IMMediate:LOW command.

Description
  • (AWG5000 Series only) This command and query sets or returns the low digital output. This command is available only for AWG5000B and AWG5000C instruments with option 03.
Usage
  • Using the .query() method will send the SOURce[n]:DIGital:VOLTage:LEVel:IMMediate:LOW? query.
  • Using the .verify(value) method will send the SOURce[n]:DIGital:VOLTage:LEVel:IMMediate:LOW? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SOURce[n]:DIGital:VOLTage:LEVel:IMMediate:LOW value command.
SCPI Syntax 
- SOURce[n]:DIGital:VOLTage:LEVel:IMMediate:LOW <NR3>
- SOURce[n]:DIGital:VOLTage:LEVel:IMMediate:LOW?
Info
  • <NR3>

SourceItemDigitalVoltageLevelImmediateOffset

Bases: SCPICmdWrite, SCPICmdRead

The SOURce[n]:DIGital:VOLTage:LEVel:IMMediate:OFFSet command.

Description
  • (AWG5000 Series only) This command and query sets or returns the offset of digital output. This command is available only for AWG5000B and AWG5000C instruments with option 03.
Usage
  • Using the .query() method will send the SOURce[n]:DIGital:VOLTage:LEVel:IMMediate:OFFSet? query.
  • Using the .verify(value) method will send the SOURce[n]:DIGital:VOLTage:LEVel:IMMediate:OFFSet? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SOURce[n]:DIGital:VOLTage:LEVel:IMMediate:OFFSet value command.
SCPI Syntax 
- SOURce[n]:DIGital:VOLTage:LEVel:IMMediate:OFFSet <NR3>
- SOURce[n]:DIGital:VOLTage:LEVel:IMMediate:OFFSet?
Info
  • <NR3>

SourceItemFrequency

Bases: SCPICmdRead

The SOURce[n]:FREQuency command tree.

Usage
  • Using the .query() method will send the SOURce[n]:FREQuency? query.
  • Using the .verify(value) method will send the SOURce[n]:FREQuency? query and raise an AssertionError if the returned value does not match value.
Properties
  • .cw: The SOURce[n]:FREQuency:CW command.
  • .fixed: The SOURce[n]:FREQuency:FIXed command.

cw property 

cw: SourceItemFrequencyCw

Return the SOURce[n]:FREQuency:CW command.

Description
  • This command and query sets or returns the sampling frequency of the arbitrary waveform generator. Sampling frequency can be set when the internal clock source is selected and one of the following conditions is met: Internal is selected as Reference Source. External is selected as Reference Source and Fixed is selected as External Reference Type. CW and FIXed are aliases and have the same effect. Note that the frequency of the waveform output by the instrument is calculated as: The minimum number of points in a waveform for the instrument is 1.
Usage
  • Using the .query() method will send the SOURce[n]:FREQuency:CW? query.
  • Using the .verify(value) method will send the SOURce[n]:FREQuency:CW? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SOURce[n]:FREQuency:CW value command.
SCPI Syntax 
- SOURce[n]:FREQuency:CW <NR3>
- SOURce[n]:FREQuency:CW?
Info
  • <NR3> . The value must be between 10 MHz to 10 GHz.

fixed property 

fixed: SourceItemFrequencyFixed

Return the SOURce[n]:FREQuency:FIXed command.

Description
  • This command and query sets or returns the sampling frequency of the arbitrary waveform generator. Sampling frequency can be set when the internal clock source is selected and one of the following conditions is met: Internal is selected as Reference Source. External is selected as Reference Source and Fixed is selected as External Reference Type. CW and FIXed are aliases and have the same effect. Note that the frequency of the waveform output by the instrument is calculated as: The minimum number of points in a waveform for the instrument is 1.
Usage
  • Using the .query() method will send the SOURce[n]:FREQuency:FIXed? query.
  • Using the .verify(value) method will send the SOURce[n]:FREQuency:FIXed? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SOURce[n]:FREQuency:FIXed value command.
SCPI Syntax 
- SOURce[n]:FREQuency:FIXed <NR3>
- SOURce[n]:FREQuency:FIXed?
Info
  • <NR3> . The value must be between 10 MHz to 10 GHz.

SourceItemFrequencyCw

Bases: SCPICmdWrite, SCPICmdRead

The SOURce[n]:FREQuency:CW command.

Description
  • This command and query sets or returns the sampling frequency of the arbitrary waveform generator. Sampling frequency can be set when the internal clock source is selected and one of the following conditions is met: Internal is selected as Reference Source. External is selected as Reference Source and Fixed is selected as External Reference Type. CW and FIXed are aliases and have the same effect. Note that the frequency of the waveform output by the instrument is calculated as: The minimum number of points in a waveform for the instrument is 1.
Usage
  • Using the .query() method will send the SOURce[n]:FREQuency:CW? query.
  • Using the .verify(value) method will send the SOURce[n]:FREQuency:CW? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SOURce[n]:FREQuency:CW value command.
SCPI Syntax 
- SOURce[n]:FREQuency:CW <NR3>
- SOURce[n]:FREQuency:CW?
Info
  • <NR3> . The value must be between 10 MHz to 10 GHz.

SourceItemFrequencyFixed

Bases: SCPICmdWrite, SCPICmdRead

The SOURce[n]:FREQuency:FIXed command.

Description
  • This command and query sets or returns the sampling frequency of the arbitrary waveform generator. Sampling frequency can be set when the internal clock source is selected and one of the following conditions is met: Internal is selected as Reference Source. External is selected as Reference Source and Fixed is selected as External Reference Type. CW and FIXed are aliases and have the same effect. Note that the frequency of the waveform output by the instrument is calculated as: The minimum number of points in a waveform for the instrument is 1.
Usage
  • Using the .query() method will send the SOURce[n]:FREQuency:FIXed? query.
  • Using the .verify(value) method will send the SOURce[n]:FREQuency:FIXed? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SOURce[n]:FREQuency:FIXed value command.
SCPI Syntax 
- SOURce[n]:FREQuency:FIXed <NR3>
- SOURce[n]:FREQuency:FIXed?
Info
  • <NR3> . The value must be between 10 MHz to 10 GHz.

SourceItemFunction

Bases: SCPICmdRead

The SOURce[n]:FUNCtion command tree.

Usage
  • Using the .query() method will send the SOURce[n]:FUNCtion? query.
  • Using the .verify(value) method will send the SOURce[n]:FUNCtion? query and raise an AssertionError if the returned value does not match value.
Properties
  • .user: The SOURce[n]:FUNCtion:USER command.

user property 

user: SourceItemFunctionUser

Return the SOURce[n]:FUNCtion:USER command.

Description
  • This command and query sets or returns the waveform to waveform memory. Use this command to directly load an AWG400/500/600/700 series waveform (WFM), pattern file (PAT), or sequence (SEQ) file from mass memory to a specified channel. However, when loading a sequence file, the SOURce’s suffix is ignored. The waveform is internally converted to the AWG5000/AWG7000 series format and inserted into the current waveform list. To successfully load a waveform, the waveform name should conform to AWG5000/AWG7000 series waveform naming conventions. If you specify the SEQ file, Run Mode is changed to Sequence. If you specify a WFM or PAT file while the Run Mode is Sequence, Run Mode is changed to Continuous. When you import a sequence file (*.SEQ) for the AWG400/500/600/700 series using this command, all the user-defined waveforms are deleted before the import operation.
Usage
  • Using the .query() method will send the SOURce[n]:FUNCtion:USER? query.
  • Using the .verify(value) method will send the SOURce[n]:FUNCtion:USER? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SOURce[n]:FUNCtion:USER value command.
SCPI Syntax 
- SOURce[n]:FUNCtion:USER <Waveform file_name>[,<msus>]
- SOURce[n]:FUNCtion:USER?
Info
  • <Waveform file_name> :: = .

SourceItemFunctionUser

Bases: SCPICmdWrite, SCPICmdRead

The SOURce[n]:FUNCtion:USER command.

Description
  • This command and query sets or returns the waveform to waveform memory. Use this command to directly load an AWG400/500/600/700 series waveform (WFM), pattern file (PAT), or sequence (SEQ) file from mass memory to a specified channel. However, when loading a sequence file, the SOURce’s suffix is ignored. The waveform is internally converted to the AWG5000/AWG7000 series format and inserted into the current waveform list. To successfully load a waveform, the waveform name should conform to AWG5000/AWG7000 series waveform naming conventions. If you specify the SEQ file, Run Mode is changed to Sequence. If you specify a WFM or PAT file while the Run Mode is Sequence, Run Mode is changed to Continuous. When you import a sequence file (*.SEQ) for the AWG400/500/600/700 series using this command, all the user-defined waveforms are deleted before the import operation.
Usage
  • Using the .query() method will send the SOURce[n]:FUNCtion:USER? query.
  • Using the .verify(value) method will send the SOURce[n]:FUNCtion:USER? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SOURce[n]:FUNCtion:USER value command.
SCPI Syntax 
- SOURce[n]:FUNCtion:USER <Waveform file_name>[,<msus>]
- SOURce[n]:FUNCtion:USER?
Info
  • <Waveform file_name> :: = .

SourceItemMarker1

Bases: SCPICmdRead

The SOURce[n]:MARKer1 command tree.

Usage
  • Using the .query() method will send the SOURce[n]:MARKer1? query.
  • Using the .verify(value) method will send the SOURce[n]:MARKer1? query and raise an AssertionError if the returned value does not match value.
Properties
  • .delay: The SOURce[n]:MARKer1:DELay command.
  • .voltage: The SOURce[n]:MARKer1:VOLTage command tree.

delay property 

delay: SourceItemMarker1Delay

Return the SOURce[n]:MARKer1:DELay command.

Description
  • This command and query sets or returns the marker delay. Marker delay is independent for each channel. In the AWG7000 Series when DAC resolution is changed to 10 bits, marker output is not available. However, marker related parameters can be modified using SCPI commands.
Usage
  • Using the .query() method will send the SOURce[n]:MARKer1:DELay? query.
  • Using the .verify(value) method will send the SOURce[n]:MARKer1:DELay? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SOURce[n]:MARKer1:DELay value command.
SCPI Syntax 
- SOURce[n]:MARKer1:DELay <NR3>
- SOURce[n]:MARKer1:DELay?
Info
  • <NR3>

voltage property 

voltage: SourceItemMarker1Voltage

Return the SOURce[n]:MARKer1:VOLTage command tree.

Usage
  • Using the .query() method will send the SOURce[n]:MARKer1:VOLTage? query.
  • Using the .verify(value) method will send the SOURce[n]:MARKer1:VOLTage? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .level: The SOURce[n]:MARKer1:VOLTage:LEVel command tree.

SourceItemMarker1Delay

Bases: SCPICmdWrite, SCPICmdRead

The SOURce[n]:MARKer1:DELay command.

Description
  • This command and query sets or returns the marker delay. Marker delay is independent for each channel. In the AWG7000 Series when DAC resolution is changed to 10 bits, marker output is not available. However, marker related parameters can be modified using SCPI commands.
Usage
  • Using the .query() method will send the SOURce[n]:MARKer1:DELay? query.
  • Using the .verify(value) method will send the SOURce[n]:MARKer1:DELay? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SOURce[n]:MARKer1:DELay value command.
SCPI Syntax 
- SOURce[n]:MARKer1:DELay <NR3>
- SOURce[n]:MARKer1:DELay?
Info
  • <NR3>

SourceItemMarker1Voltage

Bases: SCPICmdRead

The SOURce[n]:MARKer1:VOLTage command tree.

Usage
  • Using the .query() method will send the SOURce[n]:MARKer1:VOLTage? query.
  • Using the .verify(value) method will send the SOURce[n]:MARKer1:VOLTage? query and raise an AssertionError if the returned value does not match value.
Properties
  • .level: The SOURce[n]:MARKer1:VOLTage:LEVel command tree.

level property 

level: SourceItemMarker1VoltageLevel

Return the SOURce[n]:MARKer1:VOLTage:LEVel command tree.

Usage
  • Using the .query() method will send the SOURce[n]:MARKer1:VOLTage:LEVel? query.
  • Using the .verify(value) method will send the SOURce[n]:MARKer1:VOLTage:LEVel? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .immediate: The SOURce[n]:MARKer1:VOLTage:LEVel:IMMediate command tree.

SourceItemMarker1VoltageLevel

Bases: SCPICmdRead

The SOURce[n]:MARKer1:VOLTage:LEVel command tree.

Usage
  • Using the .query() method will send the SOURce[n]:MARKer1:VOLTage:LEVel? query.
  • Using the .verify(value) method will send the SOURce[n]:MARKer1:VOLTage:LEVel? query and raise an AssertionError if the returned value does not match value.
Properties
  • .immediate: The SOURce[n]:MARKer1:VOLTage:LEVel:IMMediate command tree.

immediate property 

immediate: SourceItemMarker1VoltageLevelImmediate

Return the SOURce[n]:MARKer1:VOLTage:LEVel:IMMediate command tree.

Usage
  • Using the .query() method will send the SOURce[n]:MARKer1:VOLTage:LEVel:IMMediate? query.
  • Using the .verify(value) method will send the SOURce[n]:MARKer1:VOLTage:LEVel:IMMediate? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .high: The SOURce[n]:MARKer1:VOLTage:LEVel:IMMediate:HIGH command.
  • .low: The SOURce[n]:MARKer1:VOLTage:LEVel:IMMediate:LOW command.
  • .offset: The SOURce[n]:MARKer1:VOLTage:LEVel:IMMediate:OFFSet command.
  • .amplitude: The SOURce[n]:MARKer1:VOLTage:LEVel:IMMediate:AMPLitude command.

SourceItemMarker1VoltageLevelImmediate

Bases: SCPICmdRead

The SOURce[n]:MARKer1:VOLTage:LEVel:IMMediate command tree.

Usage
  • Using the .query() method will send the SOURce[n]:MARKer1:VOLTage:LEVel:IMMediate? query.
  • Using the .verify(value) method will send the SOURce[n]:MARKer1:VOLTage:LEVel:IMMediate? query and raise an AssertionError if the returned value does not match value.
Properties
  • .high: The SOURce[n]:MARKer1:VOLTage:LEVel:IMMediate:HIGH command.
  • .low: The SOURce[n]:MARKer1:VOLTage:LEVel:IMMediate:LOW command.
  • .offset: The SOURce[n]:MARKer1:VOLTage:LEVel:IMMediate:OFFSet command.
  • .amplitude: The SOURce[n]:MARKer1:VOLTage:LEVel:IMMediate:AMPLitude command.

amplitude property 

amplitude: SourceItemMarker1VoltageLevelImmediateAmplitude

Return the SOURce[n]:MARKer1:VOLTage:LEVel:IMMediate:AMPLitude command.

Description
  • This command sets the marker amplitude. In the AWG7000 Series, when the DAC resolution is changed to 10 bits, marker output is not available. However, marker related parameters can be modified using SCPI commands.
Usage
  • Using the .query() method will send the SOURce[n]:MARKer1:VOLTage:LEVel:IMMediate:AMPLitude? query.
  • Using the .verify(value) method will send the SOURce[n]:MARKer1:VOLTage:LEVel:IMMediate:AMPLitude? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SOURce[n]:MARKer1:VOLTage:LEVel:IMMediate:AMPLitude value command.
SCPI Syntax 
- SOURce[n]:MARKer1:VOLTage:LEVel:IMMediate:AMPLitude <NR3>
- SOURce[n]:MARKer1:VOLTage:LEVel:IMMediate:AMPLitude?
Info
  • <NR3>

high property 

high: SourceItemMarker1VoltageLevelImmediateHigh

Return the SOURce[n]:MARKer1:VOLTage:LEVel:IMMediate:HIGH command.

Description
  • This command sets the marker high level. In the AWG7000 Series, when DAC resolution is changed to 10 bits, marker output is not available. However, marker related parameters can be modified using SCPI commands. Refer to the User Online Help for the setting range of marker high and marker low.
Usage
  • Using the .query() method will send the SOURce[n]:MARKer1:VOLTage:LEVel:IMMediate:HIGH? query.
  • Using the .verify(value) method will send the SOURce[n]:MARKer1:VOLTage:LEVel:IMMediate:HIGH? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SOURce[n]:MARKer1:VOLTage:LEVel:IMMediate:HIGH value command.
SCPI Syntax 
- SOURce[n]:MARKer1:VOLTage:LEVel:IMMediate:HIGH <NR3>
- SOURce[n]:MARKer1:VOLTage:LEVel:IMMediate:HIGH?
Info
  • <NR3>

low property 

low: SourceItemMarker1VoltageLevelImmediateLow

Return the SOURce[n]:MARKer1:VOLTage:LEVel:IMMediate:LOW command.

Description
  • This command sets the marker low level. In the AWG7000 Series, when the DAC resolution is changed to 10 bits, marker output is not available. However, marker related parameters can be modified using SCPI commands. Refer to the User Online Help for the setting range of marker high and marker low.
Usage
  • Using the .query() method will send the SOURce[n]:MARKer1:VOLTage:LEVel:IMMediate:LOW? query.
  • Using the .verify(value) method will send the SOURce[n]:MARKer1:VOLTage:LEVel:IMMediate:LOW? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SOURce[n]:MARKer1:VOLTage:LEVel:IMMediate:LOW value command.
SCPI Syntax 
- SOURce[n]:MARKer1:VOLTage:LEVel:IMMediate:LOW <NR3>
- SOURce[n]:MARKer1:VOLTage:LEVel:IMMediate:LOW?
Info
  • <NR3>

offset property 

offset: SourceItemMarker1VoltageLevelImmediateOffset

Return the SOURce[n]:MARKer1:VOLTage:LEVel:IMMediate:OFFSet command.

Description
  • This command sets the marker offset. In the AWG7000 Series, when the DAC resolution is changed to 10 bits, marker output is not available. However, marker related parameters can be modified using SCPI commands.
Usage
  • Using the .query() method will send the SOURce[n]:MARKer1:VOLTage:LEVel:IMMediate:OFFSet? query.
  • Using the .verify(value) method will send the SOURce[n]:MARKer1:VOLTage:LEVel:IMMediate:OFFSet? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SOURce[n]:MARKer1:VOLTage:LEVel:IMMediate:OFFSet value command.
SCPI Syntax 
- SOURce[n]:MARKer1:VOLTage:LEVel:IMMediate:OFFSet <NR3>
- SOURce[n]:MARKer1:VOLTage:LEVel:IMMediate:OFFSet?
Info
  • <NR3>

SourceItemMarker1VoltageLevelImmediateAmplitude

Bases: SCPICmdWrite, SCPICmdRead

The SOURce[n]:MARKer1:VOLTage:LEVel:IMMediate:AMPLitude command.

Description
  • This command sets the marker amplitude. In the AWG7000 Series, when the DAC resolution is changed to 10 bits, marker output is not available. However, marker related parameters can be modified using SCPI commands.
Usage
  • Using the .query() method will send the SOURce[n]:MARKer1:VOLTage:LEVel:IMMediate:AMPLitude? query.
  • Using the .verify(value) method will send the SOURce[n]:MARKer1:VOLTage:LEVel:IMMediate:AMPLitude? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SOURce[n]:MARKer1:VOLTage:LEVel:IMMediate:AMPLitude value command.
SCPI Syntax 
- SOURce[n]:MARKer1:VOLTage:LEVel:IMMediate:AMPLitude <NR3>
- SOURce[n]:MARKer1:VOLTage:LEVel:IMMediate:AMPLitude?
Info
  • <NR3>

SourceItemMarker1VoltageLevelImmediateHigh

Bases: SCPICmdWrite, SCPICmdRead

The SOURce[n]:MARKer1:VOLTage:LEVel:IMMediate:HIGH command.

Description
  • This command sets the marker high level. In the AWG7000 Series, when DAC resolution is changed to 10 bits, marker output is not available. However, marker related parameters can be modified using SCPI commands. Refer to the User Online Help for the setting range of marker high and marker low.
Usage
  • Using the .query() method will send the SOURce[n]:MARKer1:VOLTage:LEVel:IMMediate:HIGH? query.
  • Using the .verify(value) method will send the SOURce[n]:MARKer1:VOLTage:LEVel:IMMediate:HIGH? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SOURce[n]:MARKer1:VOLTage:LEVel:IMMediate:HIGH value command.
SCPI Syntax 
- SOURce[n]:MARKer1:VOLTage:LEVel:IMMediate:HIGH <NR3>
- SOURce[n]:MARKer1:VOLTage:LEVel:IMMediate:HIGH?
Info
  • <NR3>

SourceItemMarker1VoltageLevelImmediateLow

Bases: SCPICmdWrite, SCPICmdRead

The SOURce[n]:MARKer1:VOLTage:LEVel:IMMediate:LOW command.

Description
  • This command sets the marker low level. In the AWG7000 Series, when the DAC resolution is changed to 10 bits, marker output is not available. However, marker related parameters can be modified using SCPI commands. Refer to the User Online Help for the setting range of marker high and marker low.
Usage
  • Using the .query() method will send the SOURce[n]:MARKer1:VOLTage:LEVel:IMMediate:LOW? query.
  • Using the .verify(value) method will send the SOURce[n]:MARKer1:VOLTage:LEVel:IMMediate:LOW? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SOURce[n]:MARKer1:VOLTage:LEVel:IMMediate:LOW value command.
SCPI Syntax 
- SOURce[n]:MARKer1:VOLTage:LEVel:IMMediate:LOW <NR3>
- SOURce[n]:MARKer1:VOLTage:LEVel:IMMediate:LOW?
Info
  • <NR3>

SourceItemMarker1VoltageLevelImmediateOffset

Bases: SCPICmdWrite, SCPICmdRead

The SOURce[n]:MARKer1:VOLTage:LEVel:IMMediate:OFFSet command.

Description
  • This command sets the marker offset. In the AWG7000 Series, when the DAC resolution is changed to 10 bits, marker output is not available. However, marker related parameters can be modified using SCPI commands.
Usage
  • Using the .query() method will send the SOURce[n]:MARKer1:VOLTage:LEVel:IMMediate:OFFSet? query.
  • Using the .verify(value) method will send the SOURce[n]:MARKer1:VOLTage:LEVel:IMMediate:OFFSet? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SOURce[n]:MARKer1:VOLTage:LEVel:IMMediate:OFFSet value command.
SCPI Syntax 
- SOURce[n]:MARKer1:VOLTage:LEVel:IMMediate:OFFSet <NR3>
- SOURce[n]:MARKer1:VOLTage:LEVel:IMMediate:OFFSet?
Info
  • <NR3>

SourceItemMarker2

Bases: SCPICmdRead

The SOURce[n]:MARKer2 command tree.

Usage
  • Using the .query() method will send the SOURce[n]:MARKer2? query.
  • Using the .verify(value) method will send the SOURce[n]:MARKer2? query and raise an AssertionError if the returned value does not match value.
Properties
  • .delay: The SOURce[n]:MARKer2:DELay command.
  • .voltage: The SOURce[n]:MARKer2:VOLTage command tree.

delay property 

delay: SourceItemMarker2Delay

Return the SOURce[n]:MARKer2:DELay command.

Description
  • This command and query sets or returns the marker delay. Marker delay is independent for each channel. In the AWG7000 Series when DAC resolution is changed to 10 bits, marker output is not available. However, marker related parameters can be modified using SCPI commands.
Usage
  • Using the .query() method will send the SOURce[n]:MARKer2:DELay? query.
  • Using the .verify(value) method will send the SOURce[n]:MARKer2:DELay? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SOURce[n]:MARKer2:DELay value command.
SCPI Syntax 
- SOURce[n]:MARKer2:DELay <NR3>
- SOURce[n]:MARKer2:DELay?
Info
  • <NR3>

voltage property 

voltage: SourceItemMarker2Voltage

Return the SOURce[n]:MARKer2:VOLTage command tree.

Usage
  • Using the .query() method will send the SOURce[n]:MARKer2:VOLTage? query.
  • Using the .verify(value) method will send the SOURce[n]:MARKer2:VOLTage? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .level: The SOURce[n]:MARKer2:VOLTage:LEVel command tree.

SourceItemMarker2Delay

Bases: SCPICmdWrite, SCPICmdRead

The SOURce[n]:MARKer2:DELay command.

Description
  • This command and query sets or returns the marker delay. Marker delay is independent for each channel. In the AWG7000 Series when DAC resolution is changed to 10 bits, marker output is not available. However, marker related parameters can be modified using SCPI commands.
Usage
  • Using the .query() method will send the SOURce[n]:MARKer2:DELay? query.
  • Using the .verify(value) method will send the SOURce[n]:MARKer2:DELay? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SOURce[n]:MARKer2:DELay value command.
SCPI Syntax 
- SOURce[n]:MARKer2:DELay <NR3>
- SOURce[n]:MARKer2:DELay?
Info
  • <NR3>

SourceItemMarker2Voltage

Bases: SCPICmdRead

The SOURce[n]:MARKer2:VOLTage command tree.

Usage
  • Using the .query() method will send the SOURce[n]:MARKer2:VOLTage? query.
  • Using the .verify(value) method will send the SOURce[n]:MARKer2:VOLTage? query and raise an AssertionError if the returned value does not match value.
Properties
  • .level: The SOURce[n]:MARKer2:VOLTage:LEVel command tree.

level property 

level: SourceItemMarker2VoltageLevel

Return the SOURce[n]:MARKer2:VOLTage:LEVel command tree.

Usage
  • Using the .query() method will send the SOURce[n]:MARKer2:VOLTage:LEVel? query.
  • Using the .verify(value) method will send the SOURce[n]:MARKer2:VOLTage:LEVel? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .immediate: The SOURce[n]:MARKer2:VOLTage:LEVel:IMMediate command tree.

SourceItemMarker2VoltageLevel

Bases: SCPICmdRead

The SOURce[n]:MARKer2:VOLTage:LEVel command tree.

Usage
  • Using the .query() method will send the SOURce[n]:MARKer2:VOLTage:LEVel? query.
  • Using the .verify(value) method will send the SOURce[n]:MARKer2:VOLTage:LEVel? query and raise an AssertionError if the returned value does not match value.
Properties
  • .immediate: The SOURce[n]:MARKer2:VOLTage:LEVel:IMMediate command tree.

immediate property 

immediate: SourceItemMarker2VoltageLevelImmediate

Return the SOURce[n]:MARKer2:VOLTage:LEVel:IMMediate command tree.

Usage
  • Using the .query() method will send the SOURce[n]:MARKer2:VOLTage:LEVel:IMMediate? query.
  • Using the .verify(value) method will send the SOURce[n]:MARKer2:VOLTage:LEVel:IMMediate? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .high: The SOURce[n]:MARKer2:VOLTage:LEVel:IMMediate:HIGH command.
  • .low: The SOURce[n]:MARKer2:VOLTage:LEVel:IMMediate:LOW command.
  • .offset: The SOURce[n]:MARKer2:VOLTage:LEVel:IMMediate:OFFSet command.
  • .amplitude: The SOURce[n]:MARKer2:VOLTage:LEVel:IMMediate:AMPLitude command.

SourceItemMarker2VoltageLevelImmediate

Bases: SCPICmdRead

The SOURce[n]:MARKer2:VOLTage:LEVel:IMMediate command tree.

Usage
  • Using the .query() method will send the SOURce[n]:MARKer2:VOLTage:LEVel:IMMediate? query.
  • Using the .verify(value) method will send the SOURce[n]:MARKer2:VOLTage:LEVel:IMMediate? query and raise an AssertionError if the returned value does not match value.
Properties
  • .high: The SOURce[n]:MARKer2:VOLTage:LEVel:IMMediate:HIGH command.
  • .low: The SOURce[n]:MARKer2:VOLTage:LEVel:IMMediate:LOW command.
  • .offset: The SOURce[n]:MARKer2:VOLTage:LEVel:IMMediate:OFFSet command.
  • .amplitude: The SOURce[n]:MARKer2:VOLTage:LEVel:IMMediate:AMPLitude command.

amplitude property 

amplitude: SourceItemMarker2VoltageLevelImmediateAmplitude

Return the SOURce[n]:MARKer2:VOLTage:LEVel:IMMediate:AMPLitude command.

Description
  • This command sets the marker amplitude. In the AWG7000 Series, when the DAC resolution is changed to 10 bits, marker output is not available. However, marker related parameters can be modified using SCPI commands.
Usage
  • Using the .query() method will send the SOURce[n]:MARKer2:VOLTage:LEVel:IMMediate:AMPLitude? query.
  • Using the .verify(value) method will send the SOURce[n]:MARKer2:VOLTage:LEVel:IMMediate:AMPLitude? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SOURce[n]:MARKer2:VOLTage:LEVel:IMMediate:AMPLitude value command.
SCPI Syntax 
- SOURce[n]:MARKer2:VOLTage:LEVel:IMMediate:AMPLitude <NR3>
- SOURce[n]:MARKer2:VOLTage:LEVel:IMMediate:AMPLitude?
Info
  • <NR3>

high property 

high: SourceItemMarker2VoltageLevelImmediateHigh

Return the SOURce[n]:MARKer2:VOLTage:LEVel:IMMediate:HIGH command.

Description
  • This command sets the marker high level. In the AWG7000 Series, when DAC resolution is changed to 10 bits, marker output is not available. However, marker related parameters can be modified using SCPI commands. Refer to the User Online Help for the setting range of marker high and marker low.
Usage
  • Using the .query() method will send the SOURce[n]:MARKer2:VOLTage:LEVel:IMMediate:HIGH? query.
  • Using the .verify(value) method will send the SOURce[n]:MARKer2:VOLTage:LEVel:IMMediate:HIGH? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SOURce[n]:MARKer2:VOLTage:LEVel:IMMediate:HIGH value command.
SCPI Syntax 
- SOURce[n]:MARKer2:VOLTage:LEVel:IMMediate:HIGH <NR3>
- SOURce[n]:MARKer2:VOLTage:LEVel:IMMediate:HIGH?
Info
  • <NR3>

low property 

low: SourceItemMarker2VoltageLevelImmediateLow

Return the SOURce[n]:MARKer2:VOLTage:LEVel:IMMediate:LOW command.

Description
  • This command sets the marker low level. In the AWG7000 Series, when the DAC resolution is changed to 10 bits, marker output is not available. However, marker related parameters can be modified using SCPI commands. Refer to the User Online Help for the setting range of marker high and marker low.
Usage
  • Using the .query() method will send the SOURce[n]:MARKer2:VOLTage:LEVel:IMMediate:LOW? query.
  • Using the .verify(value) method will send the SOURce[n]:MARKer2:VOLTage:LEVel:IMMediate:LOW? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SOURce[n]:MARKer2:VOLTage:LEVel:IMMediate:LOW value command.
SCPI Syntax 
- SOURce[n]:MARKer2:VOLTage:LEVel:IMMediate:LOW <NR3>
- SOURce[n]:MARKer2:VOLTage:LEVel:IMMediate:LOW?
Info
  • <NR3>

offset property 

offset: SourceItemMarker2VoltageLevelImmediateOffset

Return the SOURce[n]:MARKer2:VOLTage:LEVel:IMMediate:OFFSet command.

Description
  • This command sets the marker offset. In the AWG7000 Series, when the DAC resolution is changed to 10 bits, marker output is not available. However, marker related parameters can be modified using SCPI commands.
Usage
  • Using the .query() method will send the SOURce[n]:MARKer2:VOLTage:LEVel:IMMediate:OFFSet? query.
  • Using the .verify(value) method will send the SOURce[n]:MARKer2:VOLTage:LEVel:IMMediate:OFFSet? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SOURce[n]:MARKer2:VOLTage:LEVel:IMMediate:OFFSet value command.
SCPI Syntax 
- SOURce[n]:MARKer2:VOLTage:LEVel:IMMediate:OFFSet <NR3>
- SOURce[n]:MARKer2:VOLTage:LEVel:IMMediate:OFFSet?
Info
  • <NR3>

SourceItemMarker2VoltageLevelImmediateAmplitude

Bases: SCPICmdWrite, SCPICmdRead

The SOURce[n]:MARKer2:VOLTage:LEVel:IMMediate:AMPLitude command.

Description
  • This command sets the marker amplitude. In the AWG7000 Series, when the DAC resolution is changed to 10 bits, marker output is not available. However, marker related parameters can be modified using SCPI commands.
Usage
  • Using the .query() method will send the SOURce[n]:MARKer2:VOLTage:LEVel:IMMediate:AMPLitude? query.
  • Using the .verify(value) method will send the SOURce[n]:MARKer2:VOLTage:LEVel:IMMediate:AMPLitude? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SOURce[n]:MARKer2:VOLTage:LEVel:IMMediate:AMPLitude value command.
SCPI Syntax 
- SOURce[n]:MARKer2:VOLTage:LEVel:IMMediate:AMPLitude <NR3>
- SOURce[n]:MARKer2:VOLTage:LEVel:IMMediate:AMPLitude?
Info
  • <NR3>

SourceItemMarker2VoltageLevelImmediateHigh

Bases: SCPICmdWrite, SCPICmdRead

The SOURce[n]:MARKer2:VOLTage:LEVel:IMMediate:HIGH command.

Description
  • This command sets the marker high level. In the AWG7000 Series, when DAC resolution is changed to 10 bits, marker output is not available. However, marker related parameters can be modified using SCPI commands. Refer to the User Online Help for the setting range of marker high and marker low.
Usage
  • Using the .query() method will send the SOURce[n]:MARKer2:VOLTage:LEVel:IMMediate:HIGH? query.
  • Using the .verify(value) method will send the SOURce[n]:MARKer2:VOLTage:LEVel:IMMediate:HIGH? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SOURce[n]:MARKer2:VOLTage:LEVel:IMMediate:HIGH value command.
SCPI Syntax 
- SOURce[n]:MARKer2:VOLTage:LEVel:IMMediate:HIGH <NR3>
- SOURce[n]:MARKer2:VOLTage:LEVel:IMMediate:HIGH?
Info
  • <NR3>

SourceItemMarker2VoltageLevelImmediateLow

Bases: SCPICmdWrite, SCPICmdRead

The SOURce[n]:MARKer2:VOLTage:LEVel:IMMediate:LOW command.

Description
  • This command sets the marker low level. In the AWG7000 Series, when the DAC resolution is changed to 10 bits, marker output is not available. However, marker related parameters can be modified using SCPI commands. Refer to the User Online Help for the setting range of marker high and marker low.
Usage
  • Using the .query() method will send the SOURce[n]:MARKer2:VOLTage:LEVel:IMMediate:LOW? query.
  • Using the .verify(value) method will send the SOURce[n]:MARKer2:VOLTage:LEVel:IMMediate:LOW? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SOURce[n]:MARKer2:VOLTage:LEVel:IMMediate:LOW value command.
SCPI Syntax 
- SOURce[n]:MARKer2:VOLTage:LEVel:IMMediate:LOW <NR3>
- SOURce[n]:MARKer2:VOLTage:LEVel:IMMediate:LOW?
Info
  • <NR3>

SourceItemMarker2VoltageLevelImmediateOffset

Bases: SCPICmdWrite, SCPICmdRead

The SOURce[n]:MARKer2:VOLTage:LEVel:IMMediate:OFFSet command.

Description
  • This command sets the marker offset. In the AWG7000 Series, when the DAC resolution is changed to 10 bits, marker output is not available. However, marker related parameters can be modified using SCPI commands.
Usage
  • Using the .query() method will send the SOURce[n]:MARKer2:VOLTage:LEVel:IMMediate:OFFSet? query.
  • Using the .verify(value) method will send the SOURce[n]:MARKer2:VOLTage:LEVel:IMMediate:OFFSet? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SOURce[n]:MARKer2:VOLTage:LEVel:IMMediate:OFFSet value command.
SCPI Syntax 
- SOURce[n]:MARKer2:VOLTage:LEVel:IMMediate:OFFSet <NR3>
- SOURce[n]:MARKer2:VOLTage:LEVel:IMMediate:OFFSet?
Info
  • <NR3>

SourceItemPdelay

Bases: SCPICmdRead

The SOURce[n]:PDELay command tree.

Usage
  • Using the .query() method will send the SOURce[n]:PDELay? query.
  • Using the .verify(value) method will send the SOURce[n]:PDELay? query and raise an AssertionError if the returned value does not match value.
Properties
  • .hold: The SOURce[n]:PDELay:HOLD command.

hold property 

hold: SourceItemPdelayHold

Return the SOURce[n]:PDELay:HOLD command.

Description
  • This command and query sets or returns the parameter that is retained when sampling rate or waveform length is changed.
Usage
  • Using the .query() method will send the SOURce[n]:PDELay:HOLD? query.
  • Using the .verify(value) method will send the SOURce[n]:PDELay:HOLD? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SOURce[n]:PDELay:HOLD value command.
SCPI Syntax 
- SOURce[n]:PDELay:HOLD {PHASe|DELay|POINt}
- SOURce[n]:PDELay:HOLD?
Info
  • PHASe
  • DELay
  • POINt

SourceItemPdelayHold

Bases: SCPICmdWrite, SCPICmdRead

The SOURce[n]:PDELay:HOLD command.

Description
  • This command and query sets or returns the parameter that is retained when sampling rate or waveform length is changed.
Usage
  • Using the .query() method will send the SOURce[n]:PDELay:HOLD? query.
  • Using the .verify(value) method will send the SOURce[n]:PDELay:HOLD? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SOURce[n]:PDELay:HOLD value command.
SCPI Syntax 
- SOURce[n]:PDELay:HOLD {PHASe|DELay|POINt}
- SOURce[n]:PDELay:HOLD?
Info
  • PHASe
  • DELay
  • POINt

SourceItemPhase

Bases: SCPICmdRead

The SOURce[n]:PHASe command tree.

Usage
  • Using the .query() method will send the SOURce[n]:PHASe? query.
  • Using the .verify(value) method will send the SOURce[n]:PHASe? query and raise an AssertionError if the returned value does not match value.
Properties
  • .adjust: The SOURce[n]:PHASe:ADJust command.

adjust property 

adjust: SourceItemPhaseAdjust

Return the SOURce[n]:PHASe:ADJust command.

Description
  • (AWG5000 Series only) This command and query sets or returns the phase of the analog output.
Usage
  • Using the .query() method will send the SOURce[n]:PHASe:ADJust? query.
  • Using the .verify(value) method will send the SOURce[n]:PHASe:ADJust? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SOURce[n]:PHASe:ADJust value command.
SCPI Syntax 
- SOURce[n]:PHASe:ADJust <NR3>
- SOURce[n]:PHASe:ADJust?
Info
  • <NR3>

SourceItemPhaseAdjust

Bases: SCPICmdWrite, SCPICmdRead

The SOURce[n]:PHASe:ADJust command.

Description
  • (AWG5000 Series only) This command and query sets or returns the phase of the analog output.
Usage
  • Using the .query() method will send the SOURce[n]:PHASe:ADJust? query.
  • Using the .verify(value) method will send the SOURce[n]:PHASe:ADJust? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SOURce[n]:PHASe:ADJust value command.
SCPI Syntax 
- SOURce[n]:PHASe:ADJust <NR3>
- SOURce[n]:PHASe:ADJust?
Info
  • <NR3>

SourceItemRoscillator

Bases: SCPICmdRead

The SOURce[n]:ROSCillator command tree.

Usage
  • Using the .query() method will send the SOURce[n]:ROSCillator? query.
  • Using the .verify(value) method will send the SOURce[n]:ROSCillator? query and raise an AssertionError if the returned value does not match value.
Properties
  • .frequency: The SOURce[n]:ROSCillator:FREQuency command.
  • .multiplier: The SOURce[n]:ROSCillator:MULTiplier command.
  • .source: The SOURce[n]:ROSCillator:SOURce command.
  • .type: The SOURce[n]:ROSCillator:TYPE command.

frequency property 

frequency: SourceItemRoscillatorFrequency

Return the SOURce[n]:ROSCillator:FREQuency command.

Description
  • This command selects the reference oscillator frequency. Valid values are 10 MHz, 20 MHz and 100 MHz. This command is used when the Clock Source is Internal and Reference Input is External and External Reference Type is Fixed.
Usage
  • Using the .query() method will send the SOURce[n]:ROSCillator:FREQuency? query.
  • Using the .verify(value) method will send the SOURce[n]:ROSCillator:FREQuency? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SOURce[n]:ROSCillator:FREQuency value command.
SCPI Syntax 
- SOURce[n]:ROSCillator:FREQuency <NR3>
- SOURce[n]:ROSCillator:FREQuency?
Info
  • <NR3>

multiplier property 

multiplier: SourceItemRoscillatorMultiplier

Return the SOURce[n]:ROSCillator:MULTiplier command.

Description
  • This command and query sets or returns the ROSCillator multiplier rate. This parameter is valid only when Clock Source is Internal and Reference Source is External and External Reference Type is Variable.
Usage
  • Using the .query() method will send the SOURce[n]:ROSCillator:MULTiplier? query.
  • Using the .verify(value) method will send the SOURce[n]:ROSCillator:MULTiplier? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SOURce[n]:ROSCillator:MULTiplier value command.
SCPI Syntax 
- SOURce[n]:ROSCillator:MULTiplier <NR1>
- SOURce[n]:ROSCillator:MULTiplier?
Info
  • <NR1>

source property 

source: SourceItemRoscillatorSource

Return the SOURce[n]:ROSCillator:SOURce command.

Description
  • This command selects the reference oscillator source. INTernal means that the reference frequency is derived from the internal precision oscillator. EXTernal means the reference frequency is derived from an external signal supplied through the Reference Clock Input connector.
Usage
  • Using the .query() method will send the SOURce[n]:ROSCillator:SOURce? query.
  • Using the .verify(value) method will send the SOURce[n]:ROSCillator:SOURce? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SOURce[n]:ROSCillator:SOURce value command.
SCPI Syntax 
- SOURce[n]:ROSCillator:SOURce {INTernal|EXTernal}
- SOURce[n]:ROSCillator:SOURce?
Info
  • <INTernal
  • EXTernal>
  • INTernal - The reference frequency is derived from the internal precision oscillator.
  • EXTernal - The reference frequency is derived from an external signal supplied through the reference clock input.

type property 

type: SourceItemRoscillatorType

Return the SOURce[n]:ROSCillator:TYPE command.

Description
  • This command selects the type of the reference oscillator. This parameter is valid only when Clock Source is Internal and Reference Source is External.
Usage
  • Using the .query() method will send the SOURce[n]:ROSCillator:TYPE? query.
  • Using the .verify(value) method will send the SOURce[n]:ROSCillator:TYPE? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SOURce[n]:ROSCillator:TYPE value command.
SCPI Syntax 
- SOURce[n]:ROSCillator:TYPE {FIXed|VARiable}
- SOURce[n]:ROSCillator:TYPE?
Info
  • FIXed
  • VARiable
  • FIXed : Selects a reference source whose frequency is fixed to 10MHz, 20MHz, or 100MHz. Select one of these frequencies using the [SOURce[1]]:ROSCillator:FREQuency command.
  • VARiable : Selects a reference source whose frequency is not fixed.

SourceItemRoscillatorFrequency

Bases: SCPICmdWrite, SCPICmdRead

The SOURce[n]:ROSCillator:FREQuency command.

Description
  • This command selects the reference oscillator frequency. Valid values are 10 MHz, 20 MHz and 100 MHz. This command is used when the Clock Source is Internal and Reference Input is External and External Reference Type is Fixed.
Usage
  • Using the .query() method will send the SOURce[n]:ROSCillator:FREQuency? query.
  • Using the .verify(value) method will send the SOURce[n]:ROSCillator:FREQuency? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SOURce[n]:ROSCillator:FREQuency value command.
SCPI Syntax 
- SOURce[n]:ROSCillator:FREQuency <NR3>
- SOURce[n]:ROSCillator:FREQuency?
Info
  • <NR3>

SourceItemRoscillatorMultiplier

Bases: SCPICmdWrite, SCPICmdRead

The SOURce[n]:ROSCillator:MULTiplier command.

Description
  • This command and query sets or returns the ROSCillator multiplier rate. This parameter is valid only when Clock Source is Internal and Reference Source is External and External Reference Type is Variable.
Usage
  • Using the .query() method will send the SOURce[n]:ROSCillator:MULTiplier? query.
  • Using the .verify(value) method will send the SOURce[n]:ROSCillator:MULTiplier? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SOURce[n]:ROSCillator:MULTiplier value command.
SCPI Syntax 
- SOURce[n]:ROSCillator:MULTiplier <NR1>
- SOURce[n]:ROSCillator:MULTiplier?
Info
  • <NR1>

SourceItemRoscillatorSource

Bases: SCPICmdWrite, SCPICmdRead

The SOURce[n]:ROSCillator:SOURce command.

Description
  • This command selects the reference oscillator source. INTernal means that the reference frequency is derived from the internal precision oscillator. EXTernal means the reference frequency is derived from an external signal supplied through the Reference Clock Input connector.
Usage
  • Using the .query() method will send the SOURce[n]:ROSCillator:SOURce? query.
  • Using the .verify(value) method will send the SOURce[n]:ROSCillator:SOURce? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SOURce[n]:ROSCillator:SOURce value command.
SCPI Syntax 
- SOURce[n]:ROSCillator:SOURce {INTernal|EXTernal}
- SOURce[n]:ROSCillator:SOURce?
Info
  • <INTernal
  • EXTernal>
  • INTernal - The reference frequency is derived from the internal precision oscillator.
  • EXTernal - The reference frequency is derived from an external signal supplied through the reference clock input.

SourceItemRoscillatorType

Bases: SCPICmdWrite, SCPICmdRead

The SOURce[n]:ROSCillator:TYPE command.

Description
  • This command selects the type of the reference oscillator. This parameter is valid only when Clock Source is Internal and Reference Source is External.
Usage
  • Using the .query() method will send the SOURce[n]:ROSCillator:TYPE? query.
  • Using the .verify(value) method will send the SOURce[n]:ROSCillator:TYPE? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SOURce[n]:ROSCillator:TYPE value command.
SCPI Syntax 
- SOURce[n]:ROSCillator:TYPE {FIXed|VARiable}
- SOURce[n]:ROSCillator:TYPE?
Info
  • FIXed
  • VARiable
  • FIXed : Selects a reference source whose frequency is fixed to 10MHz, 20MHz, or 100MHz. Select one of these frequencies using the [SOURce[1]]:ROSCillator:FREQuency command.
  • VARiable : Selects a reference source whose frequency is not fixed.

SourceItemSkew

Bases: SCPICmdWrite, SCPICmdRead

The SOURce[n]:SKEW command.

Description
  • This command and query sets or returns the skew for the waveform associated with a channel.
Usage
  • Using the .query() method will send the SOURce[n]:SKEW? query.
  • Using the .verify(value) method will send the SOURce[n]:SKEW? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SOURce[n]:SKEW value command.
SCPI Syntax 
- SOURce[n]:SKEW <NR3>
- SOURce[n]:SKEW?
Info
  • <NR3>

SourceItemVoltage

Bases: SCPICmdRead

The SOURce[n]:VOLTage command tree.

Usage
  • Using the .query() method will send the SOURce[n]:VOLTage? query.
  • Using the .verify(value) method will send the SOURce[n]:VOLTage? query and raise an AssertionError if the returned value does not match value.
Properties
  • .level: The SOURce[n]:VOLTage:LEVel command tree.

level property 

level: SourceItemVoltageLevel

Return the SOURce[n]:VOLTage:LEVel command tree.

Usage
  • Using the .query() method will send the SOURce[n]:VOLTage:LEVel? query.
  • Using the .verify(value) method will send the SOURce[n]:VOLTage:LEVel? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .immediate: The SOURce[n]:VOLTage:LEVel:IMMediate command tree.

SourceItemVoltageLevel

Bases: SCPICmdRead

The SOURce[n]:VOLTage:LEVel command tree.

Usage
  • Using the .query() method will send the SOURce[n]:VOLTage:LEVel? query.
  • Using the .verify(value) method will send the SOURce[n]:VOLTage:LEVel? query and raise an AssertionError if the returned value does not match value.
Properties
  • .immediate: The SOURce[n]:VOLTage:LEVel:IMMediate command tree.

immediate property 

immediate: SourceItemVoltageLevelImmediate

Return the SOURce[n]:VOLTage:LEVel:IMMediate command tree.

Usage
  • Using the .query() method will send the SOURce[n]:VOLTage:LEVel:IMMediate? query.
  • Using the .verify(value) method will send the SOURce[n]:VOLTage:LEVel:IMMediate? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .high: The SOURce[n]:VOLTage:LEVel:IMMediate:HIGH command.
  • .low: The SOURce[n]:VOLTage:LEVel:IMMediate:LOW command.
  • .offset: The SOURce[n]:VOLTage:LEVel:IMMediate:OFFSet command.
  • .amplitude: The SOURce[n]:VOLTage:LEVel:IMMediate:AMPLitude command.

SourceItemVoltageLevelImmediate

Bases: SCPICmdRead

The SOURce[n]:VOLTage:LEVel:IMMediate command tree.

Usage
  • Using the .query() method will send the SOURce[n]:VOLTage:LEVel:IMMediate? query.
  • Using the .verify(value) method will send the SOURce[n]:VOLTage:LEVel:IMMediate? query and raise an AssertionError if the returned value does not match value.
Properties
  • .high: The SOURce[n]:VOLTage:LEVel:IMMediate:HIGH command.
  • .low: The SOURce[n]:VOLTage:LEVel:IMMediate:LOW command.
  • .offset: The SOURce[n]:VOLTage:LEVel:IMMediate:OFFSet command.
  • .amplitude: The SOURce[n]:VOLTage:LEVel:IMMediate:AMPLitude command.

amplitude property 

amplitude: SourceItemVoltageLevelImmediateAmplitude

Return the SOURce[n]:VOLTage:LEVel:IMMediate:AMPLitude command.

Description
  • This command and query sets or returns the amplitude for the waveform associated with a channel.
Usage
  • Using the .query() method will send the SOURce[n]:VOLTage:LEVel:IMMediate:AMPLitude? query.
  • Using the .verify(value) method will send the SOURce[n]:VOLTage:LEVel:IMMediate:AMPLitude? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SOURce[n]:VOLTage:LEVel:IMMediate:AMPLitude value command.
SCPI Syntax 
- SOURce[n]:VOLTage:LEVel:IMMediate:AMPLitude <NR3>
- SOURce[n]:VOLTage:LEVel:IMMediate:AMPLitude?
Info
  • <NR3> in the range 50 mV to 2V pk-pk.

high property 

high: SourceItemVoltageLevelImmediateHigh

Return the SOURce[n]:VOLTage:LEVel:IMMediate:HIGH command.

Description
  • This command and query sets or returns the high voltage level for the waveform associated with a channel. The command is not available on instruments with the Option 02 or Option 06 installed.
Usage
  • Using the .query() method will send the SOURce[n]:VOLTage:LEVel:IMMediate:HIGH? query.
  • Using the .verify(value) method will send the SOURce[n]:VOLTage:LEVel:IMMediate:HIGH? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SOURce[n]:VOLTage:LEVel:IMMediate:HIGH value command.
SCPI Syntax 
- SOURce[n]:VOLTage:LEVel:IMMediate:HIGH <NR3>
- SOURce[n]:VOLTage:LEVel:IMMediate:HIGH?
Info
  • <NR3>

low property 

low: SourceItemVoltageLevelImmediateLow

Return the SOURce[n]:VOLTage:LEVel:IMMediate:LOW command.

Description
  • This command and query sets or returns the low voltage level for the waveform associated with a channel. The command is not available on instruments with Option 02 or Option 06 installed.
Usage
  • Using the .query() method will send the SOURce[n]:VOLTage:LEVel:IMMediate:LOW? query.
  • Using the .verify(value) method will send the SOURce[n]:VOLTage:LEVel:IMMediate:LOW? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SOURce[n]:VOLTage:LEVel:IMMediate:LOW value command.
SCPI Syntax 
- SOURce[n]:VOLTage:LEVel:IMMediate:LOW <NR3>
- SOURce[n]:VOLTage:LEVel:IMMediate:LOW?
Info
  • <NR3>

offset property 

offset: SourceItemVoltageLevelImmediateOffset

Return the SOURce[n]:VOLTage:LEVel:IMMediate:OFFSet command.

Description
  • This command and query sets or returns the offset for the waveform associated with a channel. The command is not available on instruments with Option 02 or Option 06 installed.
Usage
  • Using the .query() method will send the SOURce[n]:VOLTage:LEVel:IMMediate:OFFSet? query.
  • Using the .verify(value) method will send the SOURce[n]:VOLTage:LEVel:IMMediate:OFFSet? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SOURce[n]:VOLTage:LEVel:IMMediate:OFFSet value command.
SCPI Syntax 
- SOURce[n]:VOLTage:LEVel:IMMediate:OFFSet <NR3>
- SOURce[n]:VOLTage:LEVel:IMMediate:OFFSet?
Info
  • <NR3>

SourceItemVoltageLevelImmediateAmplitude

Bases: SCPICmdWrite, SCPICmdRead

The SOURce[n]:VOLTage:LEVel:IMMediate:AMPLitude command.

Description
  • This command and query sets or returns the amplitude for the waveform associated with a channel.
Usage
  • Using the .query() method will send the SOURce[n]:VOLTage:LEVel:IMMediate:AMPLitude? query.
  • Using the .verify(value) method will send the SOURce[n]:VOLTage:LEVel:IMMediate:AMPLitude? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SOURce[n]:VOLTage:LEVel:IMMediate:AMPLitude value command.
SCPI Syntax 
- SOURce[n]:VOLTage:LEVel:IMMediate:AMPLitude <NR3>
- SOURce[n]:VOLTage:LEVel:IMMediate:AMPLitude?
Info
  • <NR3> in the range 50 mV to 2V pk-pk.

SourceItemVoltageLevelImmediateHigh

Bases: SCPICmdWrite, SCPICmdRead

The SOURce[n]:VOLTage:LEVel:IMMediate:HIGH command.

Description
  • This command and query sets or returns the high voltage level for the waveform associated with a channel. The command is not available on instruments with the Option 02 or Option 06 installed.
Usage
  • Using the .query() method will send the SOURce[n]:VOLTage:LEVel:IMMediate:HIGH? query.
  • Using the .verify(value) method will send the SOURce[n]:VOLTage:LEVel:IMMediate:HIGH? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SOURce[n]:VOLTage:LEVel:IMMediate:HIGH value command.
SCPI Syntax 
- SOURce[n]:VOLTage:LEVel:IMMediate:HIGH <NR3>
- SOURce[n]:VOLTage:LEVel:IMMediate:HIGH?
Info
  • <NR3>

SourceItemVoltageLevelImmediateLow

Bases: SCPICmdWrite, SCPICmdRead

The SOURce[n]:VOLTage:LEVel:IMMediate:LOW command.

Description
  • This command and query sets or returns the low voltage level for the waveform associated with a channel. The command is not available on instruments with Option 02 or Option 06 installed.
Usage
  • Using the .query() method will send the SOURce[n]:VOLTage:LEVel:IMMediate:LOW? query.
  • Using the .verify(value) method will send the SOURce[n]:VOLTage:LEVel:IMMediate:LOW? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SOURce[n]:VOLTage:LEVel:IMMediate:LOW value command.
SCPI Syntax 
- SOURce[n]:VOLTage:LEVel:IMMediate:LOW <NR3>
- SOURce[n]:VOLTage:LEVel:IMMediate:LOW?
Info
  • <NR3>

SourceItemVoltageLevelImmediateOffset

Bases: SCPICmdWrite, SCPICmdRead

The SOURce[n]:VOLTage:LEVel:IMMediate:OFFSet command.

Description
  • This command and query sets or returns the offset for the waveform associated with a channel. The command is not available on instruments with Option 02 or Option 06 installed.
Usage
  • Using the .query() method will send the SOURce[n]:VOLTage:LEVel:IMMediate:OFFSet? query.
  • Using the .verify(value) method will send the SOURce[n]:VOLTage:LEVel:IMMediate:OFFSet? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SOURce[n]:VOLTage:LEVel:IMMediate:OFFSet value command.
SCPI Syntax 
- SOURce[n]:VOLTage:LEVel:IMMediate:OFFSet <NR3>
- SOURce[n]:VOLTage:LEVel:IMMediate:OFFSet?
Info
  • <NR3>

SourceItemWaveform

Bases: SCPICmdWrite, SCPICmdRead

The SOURce[n]:WAVeform command.

Description
  • This command and query sets or returns the output waveform from the current waveform list for each channel when Run Mode is not Sequence. However, this command cannot be used to load a waveform stored in an AWG400/500/600/700 waveform or pattern file. To load a waveform stored in an AWG400/500/600/700 waveform or pattern file, use the SOURCEN:FUNCTION:USER command.
Usage
  • Using the .query() method will send the SOURce[n]:WAVeform? query.
  • Using the .verify(value) method will send the SOURce[n]:WAVeform? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SOURce[n]:WAVeform value command.
SCPI Syntax 
- SOURce[n]:WAVeform <wfm_name>
- SOURce[n]:WAVeform?
Info
  • <wfm_name> ::=.