set ¶

The set commands module.

These commands are used in the following models: DPO2K, DPO2KB, DPO4K, DPO4KB, DPO5K, DPO5KB, DPO70KC, DPO70KD, DPO70KDX, DPO70KSX, DPO7K, DPO7KC, DSA70KC, DSA70KD, MDO3, MDO3K, MDO4K, MDO4KB, MDO4KC, MSO2, MSO2K, MSO2KB, MSO4K, MSO4KB, MSO5K, MSO5KB, MSO70KC, MSO70KDX, TekScopePC

THIS FILE IS AUTO-GENERATED, IT SHOULD NOT BE MANUALLY MODIFIED.

Please report an issue if one is found.

Commands and Queries

- SET?

Set ¶

Bases: SCPICmdRead

The SET command.

Description

This query-only command returns the commands that list the instrument settings, except for configuration information for the calibration values. You can use these commands to return the instrument to the state it was in when you made the SET? query. The SET? query always returns command headers, regardless of the setting of the HEADER command. This is because the returned commands are intended to be sent back to the instrument as a command string. The VERBOSE command can still be used to specify whether the returned headers should be abbreviated or full-length. This command is identical to the LRN command.

Usage

Using the .query() method will send the SET? query.
Using the .verify(value) method will send the SET? query and raise an AssertionError if the returned value does not match value.

SCPI Syntax

- SET?