search ¶

The search commands module.

These commands are used in the following models: DPO2K, DPO2KB, MSO2K, MSO2KB

THIS FILE IS AUTO-GENERATED, IT SHOULD NOT BE MANUALLY MODIFIED.

Please report an issue if one is found.

Commands and Queries

- SEARCH:SEARCH<x>:COPy {SEARCHtotrigger|TRIGgertosearch}
- SEARCH:SEARCH<x>:STATE {ON|OFF|<NR1>}
- SEARCH:SEARCH<x>:STATE?
- SEARCH:SEARCH<x>:TOTAL?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:CAN:ADDRess:MODe {STandard|EXTended}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:CAN:ADDRess:MODe?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:CAN:ADDRess:VALue <bin>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:CAN:ADDRess:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:CAN:CONDition {SOF|FRAMEtype|IDentifier|DATA|IDANDDATA|EOF|ACKMISS|ERROR}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:CAN:CONDition?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:CAN:DATa:DIRection {READ|WRITE|NOCARE}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:CAN:DATa:DIRection?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:CAN:DATa:QUALifier {LESSThan|MOREThan|UNEQual|LESSEQual|MOREEQual|EQual}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:CAN:DATa:QUALifier?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:CAN:DATa:SIZe <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:CAN:DATa:SIZe?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:CAN:DATa:VALue <bin>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:CAN:DATa:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:CAN:FRAMEtype {DATA|REMote|ERRor|OVERLoad}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:CAN:FRAMEtype?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:CAN:IDentifier:MODe {STandard|EXTended}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:CAN:IDentifier:MODe?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:CAN:IDentifier:VALue <bin>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:CAN:IDentifier:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:CONDition {SOF|FRAMETypeid|CYCLEcount|HEADer|DATA|IDANDDATA|EOF|ERROR}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:CONDition?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:CYCLEcount:HIVALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:CYCLEcount:HIVALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:CYCLEcount:QUALifier {LESSThan|MOREThan|EQUal|UNEQual|LESSEQual|MOREEQual|INrange|OUTrange}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:CYCLEcount:QUALifier?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:CYCLEcount:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:CYCLEcount:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:DATa:HIVALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:DATa:HIVALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:DATa:OFFSet <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:DATa:OFFSet?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:DATa:QUALifier {LESSThan|MOREThan|EQUal|UNEQual|LESSEQual|MOREEQual|INrange|OUTrange}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:DATa:QUALifier?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:DATa:SIZe <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:DATa:SIZe?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:DATa:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:DATa:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:EOFTYPE {STATic|DYNAMic|ANY}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:EOFTYPE?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:ERRTYPE {CRCHeader|CRCTrailer|SYNCFrame|STARTupnosync|NULLFRStatic|NULLFRDynamic}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:ERRTYPE?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:FRAMEID:HIVALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:FRAMEID:HIVALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:FRAMEID:QUALifier {LESSThan|MOREThan|EQUal|UNEQual|LESSEQual|MOREEQual|INrange|OUTrange}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:FRAMEID:QUALifier?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:FRAMEID:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:FRAMEID:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:FRAMEType {NORMal|PAYLoad|NULL|SYNC|STARTup}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:FRAMEType?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:HEADER:CRC <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:HEADER:CRC?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:HEADER:CYCLEcount <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:HEADER:CYCLEcount?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:HEADER:FRAMEID <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:HEADER:FRAMEID?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:HEADER:INDBits <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:HEADER:INDBits?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:HEADER:PAYLength <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:HEADER:PAYLength?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:I2C:ADDRess:MODe {ADDR7|ADDR10}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:I2C:ADDRess:MODe?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:I2C:ADDRess:TYPe {GENeralcall|STARtbyte|HSmode|EEPROM|USER}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:I2C:ADDRess:TYPe?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:I2C:ADDRess:VALue <bin>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:I2C:ADDRess:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:I2C:CONDition {STARt|STOP|REPEATstart|ACKMISS|ADDRess|DATA|ADDRANDDATA}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:I2C:CONDition?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:I2C:DATa:DIRection {READ|WRITE|NOCARE}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:I2C:DATa:DIRection?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:I2C:DATa:SIZe <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:I2C:DATa:SIZe?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:I2C:DATa:VALue <bin>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:I2C:DATa:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:LIN:CONDition {SYNCField|IDentifier|DATA|IDANDDATA|WAKEup|SLEEP|ERROR}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:LIN:CONDition?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:LIN:DATa:HIVALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:LIN:DATa:HIVALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:LIN:DATa:QUALifier {LESSThan|MOREThan|EQUal|UNEQual|LESSEQual|MOREEQual|INrange|OUTrange}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:LIN:DATa:QUALifier?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:LIN:DATa:SIZe <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:LIN:DATa:SIZe?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:LIN:DATa:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:LIN:DATa:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:LIN:ERRTYPE {SYNC|PARity|CHecksum}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:LIN:ERRTYPE?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:LIN:IDentifier:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:LIN:IDentifier:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:PARallel:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:PARallel:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:RS232C:CONDition {RXSTArt|RXDATA|RXENDPacket|RXPARity|TXSTArt|TXDATA|TXENDPacket|TXPARity}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:RS232C:CONDition?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:RS232C:RX:DATa:SIZe
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:RS232C:RX:DATa:SIZe?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:RS232C:RX:DATa:VALue
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:RS232C:RX:DATa:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:RS232C:TX:DATa:SIZe
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:RS232C:TX:DATa:SIZe?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:RS232C:TX:DATa:VALue
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:RS232C:TX:DATa:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:SPI:CONDition {SS|MISO|MOSI|MISOMOSI}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:SPI:CONDition?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:SPI:DATa:IN:VALue <bin>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:SPI:DATa:IN:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:SPI:DATa:MISO:VALue <bin>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:SPI:DATa:MISO:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:SPI:DATa:MOSI:VALue <bin>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:SPI:DATa:MOSI:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:SPI:DATa:OUT:VALue <bin>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:SPI:DATa:OUT:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:SPI:DATa:SIZe <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:SPI:DATa:SIZe?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SOUrce {B<x>}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SOUrce?
- SEARCH:SEARCH<x>:TRIGger:A:BUS?
- SEARCH:SEARCH<x>:TRIGger:A:EDGE:SLOpe {RISe|FALL}
- SEARCH:SEARCH<x>:TRIGger:A:EDGE:SLOpe?
- SEARCH:SEARCH<x>:TRIGger:A:EDGE:SOUrce {CH<x>|MATH}
- SEARCH:SEARCH<x>:TRIGger:A:EDGE:SOUrce?
- SEARCH:SEARCH<x>:TRIGger:A:LEVel {<NR3>|TTL|ECL}
- SEARCH:SEARCH<x>:TRIGger:A:LEVel:CH<x> {<NR3>|TTL|ECL}
- SEARCH:SEARCH<x>:TRIGger:A:LEVel:CH<x>?
- SEARCH:SEARCH<x>:TRIGger:A:LEVel:MATH {TTL|ECL}
- SEARCH:SEARCH<x>:TRIGger:A:LEVel:MATH?
- SEARCH:SEARCH<x>:TRIGger:A:LEVel:REF<x> {TTL|ECL}
- SEARCH:SEARCH<x>:TRIGger:A:LEVel:REF<x>?
- SEARCH:SEARCH<x>:TRIGger:A:LEVel?
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:FUNCtion {AND|NANd}
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:FUNCtion?
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:INPut:CH<x> {HIGH|LOW|X}
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:INPut:CH<x>?
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:INPut:CLOCk:EDGE {FALL|RISe|EITher}
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:INPut:CLOCk:EDGE?
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:INPut:CLOCk:SOUrce {CH<x>|MATH|REF|D<x>|NONe}
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:INPut:CLOCk:SOUrce?
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:INPut:D<x> {HIGH|LOW|X}
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:INPut:D<x>?
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:INPut:MATH {HIGH|LOW|X}
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:INPut:MATH?
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:INPut:REF<x> {HIGH|LOW|X}
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:INPut:REF<x>?
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:PATtern:INPut:CH<x> {HIGH|LOW|X}
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:PATtern:INPut:CH<x>?
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:PATtern:INPut:D<x> {HIGH|LOW|X}
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:PATtern:INPut:D<x>?
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:PATtern:INPut:MATH {HIGH|LOW|X}
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:PATtern:INPut:MATH?
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:PATtern:INPut:REF<x> {HIGH|LOW|X}
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:PATtern:INPut:REF<x>?
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:PATtern:WHEn {TRUe|FALSe|LESSThan|MOREThan|Than|EQUal|UNEQual}
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:PATtern:WHEn:LESSLimit <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:PATtern:WHEn:LESSLimit?
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:PATtern:WHEn:MORELimit <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:PATtern:WHEn:MORELimit?
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:PATtern:WHEn?
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:THReshold:CH<x> {<NR3>|TTL|ECL}
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:THReshold:CH<x>?
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:THReshold:MATH {TTL|ECL|<NR3>}
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:THReshold:MATH?
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:THReshold:REF<x> {TTL|ECL|<NR3>}
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:THReshold:REF<x>?
- SEARCH:SEARCH<x>:TRIGger:A:LOWerthreshold:CH<x> {TTL|ECL|<NR3>}
- SEARCH:SEARCH<x>:TRIGger:A:LOWerthreshold:CH<x>?
- SEARCH:SEARCH<x>:TRIGger:A:LOWerthreshold:MATH {TTL|ECL|<NR3>}
- SEARCH:SEARCH<x>:TRIGger:A:LOWerthreshold:MATH?
- SEARCH:SEARCH<x>:TRIGger:A:LOWerthreshold:REF<x> {TTL|ECL|<NR3>}
- SEARCH:SEARCH<x>:TRIGger:A:LOWerthreshold:REF<x>?
- SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:POLarity {NEGative|POSitive}
- SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:POLarity?
- SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:SOUrce {CH<x>|MATH|REF}
- SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:SOUrce?
- SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:WHEn {LESSthan|MOREthan|EQual|UNEQual}
- SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:WHEn?
- SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:WIDth <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:WIDth?
- SEARCH:SEARCH<x>:TRIGger:A:RISEFall:DELTatime <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:RISEFall:DELTatime?
- SEARCH:SEARCH<x>:TRIGger:A:RISEFall:POLarity {EITher|NEGative|POSitive}
- SEARCH:SEARCH<x>:TRIGger:A:RISEFall:POLarity?
- SEARCH:SEARCH<x>:TRIGger:A:RISEFall:SOUrce {CH<x>|MATH}
- SEARCH:SEARCH<x>:TRIGger:A:RISEFall:SOUrce?
- SEARCH:SEARCH<x>:TRIGger:A:RISEFall:WHEn {SLOWer|FASTer|EQual|UNEQual}
- SEARCH:SEARCH<x>:TRIGger:A:RISEFall:WHEn?
- SEARCH:SEARCH<x>:TRIGger:A:RUNT:POLarity {EITher|NEGative|POSitive}
- SEARCH:SEARCH<x>:TRIGger:A:RUNT:POLarity?
- SEARCH:SEARCH<x>:TRIGger:A:RUNT:SOUrce {CH<x>|MATH|REF}
- SEARCH:SEARCH<x>:TRIGger:A:RUNT:SOUrce?
- SEARCH:SEARCH<x>:TRIGger:A:RUNT:WHEn {LESSthan|MOREthan|EQual|UNEQual|OCCURS}
- SEARCH:SEARCH<x>:TRIGger:A:RUNT:WHEn?
- SEARCH:SEARCH<x>:TRIGger:A:RUNT:WIDth <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:RUNT:WIDth?
- SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:EDGE {FALL|RISe}
- SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:EDGE?
- SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:SOUrce {CH<x>|MATH|REF}
- SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:SOUrce?
- SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:THReshold {<NR3>|TTL|ECL}
- SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:THReshold?
- SEARCH:SEARCH<x>:TRIGger:A:SETHold:DATa:SOUrce DPO Models:{CH<x>|MATH|REF|D<x>}
- SEARCH:SEARCH<x>:TRIGger:A:SETHold:DATa:SOUrce?
- SEARCH:SEARCH<x>:TRIGger:A:SETHold:DATa:THReshold {<NR3>|TTL|ECL}
- SEARCH:SEARCH<x>:TRIGger:A:SETHold:DATa:THReshold?
- SEARCH:SEARCH<x>:TRIGger:A:SETHold:HOLDTime <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:SETHold:HOLDTime?
- SEARCH:SEARCH<x>:TRIGger:A:SETHold:SETTime <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:SETHold:SETTime?
- SEARCH:SEARCH<x>:TRIGger:A:SETHold:THReshold:CH<x> <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:SETHold:THReshold:CH<x>?
- SEARCH:SEARCH<x>:TRIGger:A:SETHold:THReshold:MATH <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:SETHold:THReshold:MATH1 <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:SETHold:THReshold:MATH1?
- SEARCH:SEARCH<x>:TRIGger:A:SETHold:THReshold:MATH?
- SEARCH:SEARCH<x>:TRIGger:A:SETHold:THReshold:REF<x> <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:SETHold:THReshold:REF<x>?
- SEARCH:SEARCH<x>:TRIGger:A:TRANsition:DELTatime <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:TRANsition:DELTatime?
- SEARCH:SEARCH<x>:TRIGger:A:TRANsition:POLarity {EITher|NEGative|POSitive}
- SEARCH:SEARCH<x>:TRIGger:A:TRANsition:POLarity?
- SEARCH:SEARCH<x>:TRIGger:A:TRANsition:SOUrce {CH<x>|MATH}
- SEARCH:SEARCH<x>:TRIGger:A:TRANsition:SOUrce?
- SEARCH:SEARCH<x>:TRIGger:A:TRANsition:WHEn {SLOWer|FASTer|EQual|UNEQual}
- SEARCH:SEARCH<x>:TRIGger:A:TRANsition:WHEn?
- SEARCH:SEARCH<x>:TRIGger:A:TYPe {EDGe|SETHold|PULSEWidth|RUNt|TRAnsition|LOGIc|BUS (with the appropriate application module installed)}
- SEARCH:SEARCH<x>:TRIGger:A:TYPe?
- SEARCH:SEARCH<x>:TRIGger:A:UPPerthreshold:CH<x> {TTL|ECL}
- SEARCH:SEARCH<x>:TRIGger:A:UPPerthreshold:CH<x>?
- SEARCH:SEARCH<x>:TRIGger:A:UPPerthreshold:MATH {TTL|ECL}
- SEARCH:SEARCH<x>:TRIGger:A:UPPerthreshold:MATH?
- SEARCH:SEARCH<x>:TRIGger:A:UPPerthreshold:REF<x> {TTL|ECL}
- SEARCH:SEARCH<x>:TRIGger:A:UPPerthreshold:REF<x>?
- SEARCH?

Search ¶

Bases: SCPICmdRead

The SEARCH command.

Description

Returns all search-related settings.

Usage

Using the .query() method will send the SEARCH? query.
Using the .verify(value) method will send the SEARCH? query and raise an AssertionError if the returned value does not match value.

SCPI Syntax

- SEARCH?

Properties

.search: The SEARCH:SEARCH<x> command tree.

search `property` ¶

search: dict[int, SearchSearchItem]

Return the SEARCH:SEARCH<x> command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.copy: The SEARCH:SEARCH<x>:COPy command.
.state: The SEARCH:SEARCH<x>:STATE command.
.total: The SEARCH:SEARCH<x>:TOTAL command.
.trigger: The SEARCH:SEARCH<x>:TRIGger command tree.

SearchSearchItem ¶

Bases: ValidatedDynamicNumberCmd, SCPICmdRead

The SEARCH:SEARCH<x> command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>? query and raise an AssertionError if the returned value does not match value.

Properties

.copy: The SEARCH:SEARCH<x>:COPy command.
.state: The SEARCH:SEARCH<x>:STATE command.
.total: The SEARCH:SEARCH<x>:TOTAL command.
.trigger: The SEARCH:SEARCH<x>:TRIGger command tree.

copy `property` ¶

copy: SearchSearchItemCopy

Return the SEARCH:SEARCH<x>:COPy command.

Description

This command (no query form) copies the search criteria to or from the trigger. The search number is specified by x.

Usage

Using the .write(value) method will send the SEARCH:SEARCH<x>:COPy value command.

SCPI Syntax

- SEARCH:SEARCH<x>:COPy {SEARCHtotrigger|TRIGgertosearch}

Info

SEARCHtotrigger copies the search criteria to the trigger.
TRIGgertosearch copies the trigger criteria to the search.

state `property` ¶

state: SearchSearchItemState

Return the SEARCH:SEARCH<x>:STATE command.

Description

Sets the search state to on or off. is the search number, which is always 1. The query form returns the search state. A series of example command sequences showing different searches and triggers is included as an appendix.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:STATE? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:STATE? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:STATE value command.

SCPI Syntax

- SEARCH:SEARCH<x>:STATE {ON|OFF|<NR1>}
- SEARCH:SEARCH<x>:STATE?

Info

OFF or = 0 sets the search state to off.
ON or ≠ 0 sets the search state to on.

total `property` ¶

total: SearchSearchItemTotal

Return the SEARCH:SEARCH<x>:TOTAL command.

Description

This query-only command returns the total number of found search marks for this search. The search number is specified by x.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TOTAL? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TOTAL? query and raise an AssertionError if the returned value does not match value.

SCPI Syntax

- SEARCH:SEARCH<x>:TOTAL?

trigger `property` ¶

trigger: SearchSearchItemTrigger

Return the SEARCH:SEARCH<x>:TRIGger command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.a: The SEARCH:SEARCH<x>:TRIGger:A command tree.

SearchSearchItemCopy ¶

Bases: SCPICmdWrite

The SEARCH:SEARCH<x>:COPy command.

Description

This command (no query form) copies the search criteria to or from the trigger. The search number is specified by x.

Usage

Using the .write(value) method will send the SEARCH:SEARCH<x>:COPy value command.

SCPI Syntax

- SEARCH:SEARCH<x>:COPy {SEARCHtotrigger|TRIGgertosearch}

Info

SEARCHtotrigger copies the search criteria to the trigger.
TRIGgertosearch copies the trigger criteria to the search.

SearchSearchItemState ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:STATE command.

Description

Sets the search state to on or off. is the search number, which is always 1. The query form returns the search state. A series of example command sequences showing different searches and triggers is included as an appendix.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:STATE? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:STATE? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:STATE value command.

SCPI Syntax

- SEARCH:SEARCH<x>:STATE {ON|OFF|<NR1>}
- SEARCH:SEARCH<x>:STATE?

Info

OFF or = 0 sets the search state to off.
ON or ≠ 0 sets the search state to on.

SearchSearchItemTotal ¶

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TOTAL command.

Description

This query-only command returns the total number of found search marks for this search. The search number is specified by x.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TOTAL? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TOTAL? query and raise an AssertionError if the returned value does not match value.

SCPI Syntax

- SEARCH:SEARCH<x>:TOTAL?

SearchSearchItemTrigger ¶

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger? query and raise an AssertionError if the returned value does not match value.

Properties

.a: The SEARCH:SEARCH<x>:TRIGger:A command tree.

a `property` ¶

a: SearchSearchItemTriggerA

Return the SEARCH:SEARCH<x>:TRIGger:A command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.bus: The SEARCH:SEARCH<x>:TRIGger:A:BUS command.
.edge: The SEARCH:SEARCH<x>:TRIGger:A:EDGE command tree.
.level: The SEARCH:SEARCH<x>:TRIGger:A:LEVel command.
.logic: The SEARCH:SEARCH<x>:TRIGger:A:LOGIc command tree.
.lowerthreshold: The SEARCH:SEARCH<x>:TRIGger:A:LOWerthreshold command tree.
.pulsewidth: The SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth command tree.
.runt: The SEARCH:SEARCH<x>:TRIGger:A:RUNT command tree.
.sethold: The SEARCH:SEARCH<x>:TRIGger:A:SETHold command tree.
.type: The SEARCH:SEARCH<x>:TRIGger:A:TYPe command.
.upperthreshold: The SEARCH:SEARCH<x>:TRIGger:A:UPPerthreshold command tree.
.transition: The SEARCH:SEARCH<x>:TRIGger:A:TRANsition command tree.
.risefall: The SEARCH:SEARCH<x>:TRIGger:A:RISEFall command tree.

SearchSearchItemTriggerA ¶

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A? query and raise an AssertionError if the returned value does not match value.

Properties

.bus: The SEARCH:SEARCH<x>:TRIGger:A:BUS command.
.edge: The SEARCH:SEARCH<x>:TRIGger:A:EDGE command tree.
.level: The SEARCH:SEARCH<x>:TRIGger:A:LEVel command.
.logic: The SEARCH:SEARCH<x>:TRIGger:A:LOGIc command tree.
.lowerthreshold: The SEARCH:SEARCH<x>:TRIGger:A:LOWerthreshold command tree.
.pulsewidth: The SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth command tree.
.runt: The SEARCH:SEARCH<x>:TRIGger:A:RUNT command tree.
.sethold: The SEARCH:SEARCH<x>:TRIGger:A:SETHold command tree.
.type: The SEARCH:SEARCH<x>:TRIGger:A:TYPe command.
.upperthreshold: The SEARCH:SEARCH<x>:TRIGger:A:UPPerthreshold command tree.
.transition: The SEARCH:SEARCH<x>:TRIGger:A:TRANsition command tree.
.risefall: The SEARCH:SEARCH<x>:TRIGger:A:RISEFall command tree.

bus `property` ¶

bus: SearchSearchItemTriggerABus

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS command.

Description

Queries the SEARCH:SEARCH<x>:TRIGger:A:BUS settings. is the search number, which is always 1. There are two buses, B1-B2. To set the search type to bus, use SEARCH:SEARCHX:TRIGGER:A:TYPE BUS.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS? query and raise an AssertionError if the returned value does not match value.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS?

Sub-properties

.b: The SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x> command tree.
.source: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SOUrce command.

edge `property` ¶

edge: SearchSearchItemTriggerAEdge

Return the SEARCH:SEARCH<x>:TRIGger:A:EDGE command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:EDGE? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:EDGE? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.slope: The SEARCH:SEARCH<x>:TRIGger:A:EDGE:SLOpe command.
.source: The SEARCH:SEARCH<x>:TRIGger:A:EDGE:SOUrce command.

level `property` ¶

level: SearchSearchItemTriggerALevel

Return the SEARCH:SEARCH<x>:TRIGger:A:LEVel command.

Description

Sets or returns the level for an edge trigger search to determine where to place a mark. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:LEVel? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LEVel? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LEVel value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:LEVel {<NR3>|TTL|ECL}
- SEARCH:SEARCH<x>:TRIGger:A:LEVel?

Info

<NR3> specifies the trigger level, in volts.
TTL specifies a preset TTL high level of 1.4 V.
ECL specifies a preset ECL high level of -1.3 V.

Sub-properties

.ch: The SEARCH:SEARCH<x>:TRIGger:A:LEVel:CH<x> command.
.math: The SEARCH:SEARCH<x>:TRIGger:A:LEVel:MATH command.
.ref: The SEARCH:SEARCH<x>:TRIGger:A:LEVel:REF<x> command.

logic `property` ¶

logic: SearchSearchItemTriggerALogic

Return the SEARCH:SEARCH<x>:TRIGger:A:LOGIc command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.function: The SEARCH:SEARCH<x>:TRIGger:A:LOGIc:FUNCtion command.
.input: The SEARCH:SEARCH<x>:TRIGger:A:LOGIc:INPut command tree.
.pattern: The SEARCH:SEARCH<x>:TRIGger:A:LOGIc:PATtern command tree.
.threshold: The SEARCH:SEARCH<x>:TRIGger:A:LOGIc:THReshold command tree.

lowerthreshold `property` ¶

lowerthreshold: SearchSearchItemTriggerALowerthreshold

Return the SEARCH:SEARCH<x>:TRIGger:A:LOWerthreshold command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:LOWerthreshold? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LOWerthreshold? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.ch: The SEARCH:SEARCH<x>:TRIGger:A:LOWerthreshold:CH<x> command.
.math: The SEARCH:SEARCH<x>:TRIGger:A:LOWerthreshold:MATH command.
.ref: The SEARCH:SEARCH<x>:TRIGger:A:LOWerthreshold:REF<x> command.

pulsewidth `property` ¶

pulsewidth: SearchSearchItemTriggerAPulsewidth

Return the SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.polarity: The SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:POLarity command.
.source: The SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:SOUrce command.
.when: The SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:WHEn command.
.width: The SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:WIDth command.

risefall `property` ¶

risefall: SearchSearchItemTriggerARisefall

Return the SEARCH:SEARCH<x>:TRIGger:A:RISEFall command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:RISEFall? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:RISEFall? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.deltatime: The SEARCH:SEARCH<x>:TRIGger:A:RISEFall:DELTatime command.
.polarity: The SEARCH:SEARCH<x>:TRIGger:A:RISEFall:POLarity command.
.source: The SEARCH:SEARCH<x>:TRIGger:A:RISEFall:SOUrce command.
.when: The SEARCH:SEARCH<x>:TRIGger:A:RISEFall:WHEn command.

runt `property` ¶

runt: SearchSearchItemTriggerARunt

Return the SEARCH:SEARCH<x>:TRIGger:A:RUNT command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:RUNT? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:RUNT? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.polarity: The SEARCH:SEARCH<x>:TRIGger:A:RUNT:POLarity command.
.source: The SEARCH:SEARCH<x>:TRIGger:A:RUNT:SOUrce command.
.when: The SEARCH:SEARCH<x>:TRIGger:A:RUNT:WHEn command.
.width: The SEARCH:SEARCH<x>:TRIGger:A:RUNT:WIDth command.

sethold `property` ¶

sethold: SearchSearchItemTriggerASethold

Return the SEARCH:SEARCH<x>:TRIGger:A:SETHold command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.clock: The SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk command tree.
.data: The SEARCH:SEARCH<x>:TRIGger:A:SETHold:DATa command tree.
.holdtime: The SEARCH:SEARCH<x>:TRIGger:A:SETHold:HOLDTime command.
.settime: The SEARCH:SEARCH<x>:TRIGger:A:SETHold:SETTime command.
.threshold: The SEARCH:SEARCH<x>:TRIGger:A:SETHold:THReshold command tree.

transition `property` ¶

transition: SearchSearchItemTriggerATransition

Return the SEARCH:SEARCH<x>:TRIGger:A:TRANsition command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:TRANsition? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:TRANsition? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.deltatime: The SEARCH:SEARCH<x>:TRIGger:A:TRANsition:DELTatime command.
.polarity: The SEARCH:SEARCH<x>:TRIGger:A:TRANsition:POLarity command.
.source: The SEARCH:SEARCH<x>:TRIGger:A:TRANsition:SOUrce command.
.when: The SEARCH:SEARCH<x>:TRIGger:A:TRANsition:WHEn command.

type `property` ¶

type: SearchSearchItemTriggerAType

Return the SEARCH:SEARCH<x>:TRIGger:A:TYPe command.

Description

Sets or returns the trigger type setting for a search to determine where to place a mark. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:TYPe? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:TYPe? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:TYPe value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:TYPe {EDGe|SETHold|PULSEWidth|RUNt|TRAnsition|LOGIc|BUS (with the appropriate application module installed)}
- SEARCH:SEARCH<x>:TRIGger:A:TYPe?

Info

RUNt triggers when a pulse crosses the first preset voltage threshold but does not cross the second preset threshold before recrossing the first. The thresholds are set with the SEARCH:SEARCHX:TRIGGER:A:LOWERTHRESHOLD:CHX and SEARCH:SEARCHX:TRIGGER:A:UPPERTHRESHOLD:CHX commands.
PULSEWIdth triggers when a pulse is found that has the specified polarity and is either inside or outside the limits as specified by SEARCH:SEARCHX:TRIGGER:A:LOGIC:PATTERN:WHEN:LESSLIMIT and SEARCH:SEARCHX:TRIGGER:A:LOGIC:PATTERN:WHEN:MORELIMIT. The polarity is selected using the SEARCH:SEARCHX:TRIGGER:A:RUNT:POLARITY command.
TRAnsition triggers when a pulse crosses both thresholds in the same direction as the specified polarity and the transition time between the two threshold crossings is greater or less than the specified time delta.

upperthreshold `property` ¶

upperthreshold: SearchSearchItemTriggerAUpperthreshold

Return the SEARCH:SEARCH<x>:TRIGger:A:UPPerthreshold command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:UPPerthreshold? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:UPPerthreshold? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.ch: The SEARCH:SEARCH<x>:TRIGger:A:UPPerthreshold:CH<x> command.
.math: The SEARCH:SEARCH<x>:TRIGger:A:UPPerthreshold:MATH command.
.ref: The SEARCH:SEARCH<x>:TRIGger:A:UPPerthreshold:REF<x> command.

SearchSearchItemTriggerABus ¶

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS command.

Description

Queries the SEARCH:SEARCH<x>:TRIGger:A:BUS settings. is the search number, which is always 1. There are two buses, B1-B2. To set the search type to bus, use SEARCH:SEARCHX:TRIGGER:A:TYPE BUS.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS? query and raise an AssertionError if the returned value does not match value.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS?

Properties

.b: The SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x> command tree.
.source: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SOUrce command.

b `property` ¶

b: dict[int, SearchSearchItemTriggerABusBItem]

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x> command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.can: The SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:CAN command tree.
.flexray: The SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray command tree.
.i2c: The SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:I2C command tree.
.lin: The SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:LIN command tree.
.parallel: The SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:PARallel command tree.
.rs232c: The SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:RS232C command tree.
.spi: The SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:SPI command tree.

source `property` ¶

source: SearchSearchItemTriggerABusSource

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:SOUrce command.

Description

This command specifies the source of a bus search. is the search number. SEARCH is the search number, which is always 1.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SOUrce? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SOUrce? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SOUrce value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:SOUrce {B<x>}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SOUrce?

Info

B1 specifies the Bus 1 source.
B2 specifies the Bus 2 source.
B3 specifies the Bus 3 source.
B4 specifies the Bus 4 source.

SearchSearchItemTriggerABusBItem ¶

Bases: ValidatedDynamicNumberCmd, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x> command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>? query and raise an AssertionError if the returned value does not match value.

Properties

.can: The SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:CAN command tree.
.flexray: The SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray command tree.
.i2c: The SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:I2C command tree.
.lin: The SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:LIN command tree.
.parallel: The SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:PARallel command tree.
.rs232c: The SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:RS232C command tree.
.spi: The SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:SPI command tree.

can `property` ¶

can: SearchSearchItemTriggerABusBItemCan

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:CAN command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:CAN? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:CAN? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.condition: The SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:CAN:CONDition command.
.data: The SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:CAN:DATa command tree.
.frametype: The SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:CAN:FRAMEtype command.
.identifier: The SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:CAN:IDentifier command tree.
.address: The SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:CAN:ADDRess command tree.

flexray `property` ¶

flexray: SearchSearchItemTriggerABusBItemFlexray

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.condition: The SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:CONDition command.
.cyclecount: The SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:CYCLEcount command tree.
.data: The SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:DATa command tree.
.eoftype: The SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:EOFTYPE command.
.errtype: The SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:ERRTYPE command.
.frameid: The SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:FRAMEID command tree.
.frametype: The SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:FRAMEType command.
.header: The SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:HEADER command tree.

i2c `property` ¶

i2c: SearchSearchItemTriggerABusBItemI2c

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:I2C command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:I2C? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:I2C? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.address: The SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:I2C:ADDRess command tree.
.condition: The SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:I2C:CONDition command.
.data: The SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:I2C:DATa command tree.

lin `property` ¶

lin: SearchSearchItemTriggerABusBItemLin

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:LIN command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:LIN? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:LIN? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.condition: The SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:LIN:CONDition command.
.data: The SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:LIN:DATa command tree.
.errtype: The SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:LIN:ERRTYPE command.
.identifier: The SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:LIN:IDentifier command tree.

parallel `property` ¶

parallel: SearchSearchItemTriggerABusBItemParallel

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:PARallel command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:PARallel? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:PARallel? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:PARallel:VALue command.

rs232c `property` ¶

rs232c: SearchSearchItemTriggerABusBItemRs232c

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:RS232C command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:RS232C? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:RS232C? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.condition: The SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:RS232C:CONDition command.
.rx: The SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:RS232C:RX command tree.
.tx: The SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:RS232C:TX command tree.

spi `property` ¶

spi: SearchSearchItemTriggerABusBItemSpi

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:SPI command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:SPI? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:SPI? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.condition: The SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:SPI:CONDition command.
.data: The SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:SPI:DATa command tree.

SearchSearchItemTriggerABusBItemCan ¶

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:CAN command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:CAN? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:CAN? query and raise an AssertionError if the returned value does not match value.

Properties

.condition: The SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:CAN:CONDition command.
.data: The SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:CAN:DATa command tree.
.frametype: The SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:CAN:FRAMEtype command.
.identifier: The SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:CAN:IDentifier command tree.
.address: The SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:CAN:ADDRess command tree.

address `property` ¶

address: SearchSearchItemTriggerABusBItemCanAddress

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:CAN:ADDRess command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:CAN:ADDRess? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:CAN:ADDRess? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.mode: The SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:CAN:ADDRess:MODe command.
.value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:CAN:ADDRess:VALue command.

condition `property` ¶

condition: SearchSearchItemTriggerABusBItemCanCondition

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:CAN:CONDition command.

Description

Sets or returns the search condition for a CAN trigger search. SEARCH is the search number and B is the bus number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:CAN:CONDition? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:CAN:CONDition? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:CAN:CONDition value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:CAN:CONDition {SOF|FRAMEtype|IDentifier|DATA|IDANDDATA|EOF|ACKMISS|ERROR}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:CAN:CONDition?

Info

SOF specifies a search based on the start of frame.
FRAMEtype specifies a search based on the frame type.
IDentifier specifies a search based on the frame identifier.
DATA specifies a search based on the frame data.
IDANDDATA specifies a search based on the frame identifier and data.
EOF specifies a search base on the end of frame.
ACKMISS specifies a search based on the missing ACK field.
ERROR specifies a search based on a bit stuffing error.

data `property` ¶

data: SearchSearchItemTriggerABusBItemCanData

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:CAN:DATa command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:CAN:DATa? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:CAN:DATa? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.direction: The SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:CAN:DATa:DIRection command.
.qualifier: The SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:CAN:DATa:QUALifier command.
.size: The SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:CAN:DATa:SIZe command.
.value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:CAN:DATa:VALue command.

frametype `property` ¶

frametype: SearchSearchItemTriggerABusBItemCanFrametype

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:CAN:FRAMEtype command.

Description

This command sets the frame type (data, remote, error or overload) to be used to search on CAN bus data. This only applies if the search condition has been set to FRAMEtype (using SEARCH:SEARCHX:TRIGGER:A:BUS:BX:CAN:CONDITION). SEARCH is the search number, which is always 1, and B is the bus number (1-2).

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:CAN:FRAMEtype? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:CAN:FRAMEtype? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:CAN:FRAMEtype value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:CAN:FRAMEtype {DATA|REMote|ERRor|OVERLoad}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:CAN:FRAMEtype?

Info

DATA specifies a data frame.
REMote specifies a remote frame.
ERRor specifies an error frame.
OVERLoad specifies an overload frame.

identifier `property` ¶

identifier: SearchSearchItemTriggerABusBItemCanIdentifier

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:CAN:IDentifier command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:CAN:IDentifier? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:CAN:IDentifier? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.mode: The SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:CAN:IDentifier:MODe command.
.value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:CAN:IDentifier:VALue command.

SearchSearchItemTriggerABusBItemCanAddress ¶

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:CAN:ADDRess command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:CAN:ADDRess? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:CAN:ADDRess? query and raise an AssertionError if the returned value does not match value.

Properties

.mode: The SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:CAN:ADDRess:MODe command.
.value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:CAN:ADDRess:VALue command.

mode `property` ¶

mode: SearchSearchItemTriggerABusBItemCanAddressMode

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:CAN:ADDRess:MODe command.

Description

Sets or returns the CAN addressing mode for a trigger search to a standard or extended format. SEARCH is the search number and B is the bus number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:CAN:ADDRess:MODe? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:CAN:ADDRess:MODe? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:CAN:ADDRess:MODe value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:CAN:ADDRess:MODe {STandard|EXTended}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:CAN:ADDRess:MODe?

Info

STandard specifies an 11-bit identifier field.
EXTended specifies a 29-bit identifier field.

value `property` ¶

value: SearchSearchItemTriggerABusBItemCanAddressValue

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:CAN:ADDRess:VALue command.

Description

This command sets the binary address value to be used to search on CAN bus data. This only applies if the search condition has been set to IDANDDATA or DATA (using SEARCH:SEARCHX:TRIGGER:A:BUS:BX:CAN:CONDITION). SEARCH is the search number, which is always 1, and B is the bus number (1-2).

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:CAN:ADDRess:VALue? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:CAN:ADDRess:VALue? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:CAN:ADDRess:VALue value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:CAN:ADDRess:VALue <bin>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:CAN:ADDRess:VALue?

Info

<bin> is the address in binary format.

SearchSearchItemTriggerABusBItemCanAddressMode ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:CAN:ADDRess:MODe command.

Description

Sets or returns the CAN addressing mode for a trigger search to a standard or extended format. SEARCH is the search number and B is the bus number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:CAN:ADDRess:MODe? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:CAN:ADDRess:MODe? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:CAN:ADDRess:MODe value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:CAN:ADDRess:MODe {STandard|EXTended}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:CAN:ADDRess:MODe?

Info

STandard specifies an 11-bit identifier field.
EXTended specifies a 29-bit identifier field.

SearchSearchItemTriggerABusBItemCanAddressValue ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:CAN:ADDRess:VALue command.

Description

This command sets the binary address value to be used to search on CAN bus data. This only applies if the search condition has been set to IDANDDATA or DATA (using SEARCH:SEARCHX:TRIGGER:A:BUS:BX:CAN:CONDITION). SEARCH is the search number, which is always 1, and B is the bus number (1-2).

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:CAN:ADDRess:VALue? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:CAN:ADDRess:VALue? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:CAN:ADDRess:VALue value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:CAN:ADDRess:VALue <bin>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:CAN:ADDRess:VALue?

Info

<bin> is the address in binary format.

SearchSearchItemTriggerABusBItemCanCondition ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:CAN:CONDition command.

Description

Sets or returns the search condition for a CAN trigger search. SEARCH is the search number and B is the bus number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:CAN:CONDition? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:CAN:CONDition? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:CAN:CONDition value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:CAN:CONDition {SOF|FRAMEtype|IDentifier|DATA|IDANDDATA|EOF|ACKMISS|ERROR}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:CAN:CONDition?

Info

SOF specifies a search based on the start of frame.
FRAMEtype specifies a search based on the frame type.
IDentifier specifies a search based on the frame identifier.
DATA specifies a search based on the frame data.
IDANDDATA specifies a search based on the frame identifier and data.
EOF specifies a search base on the end of frame.
ACKMISS specifies a search based on the missing ACK field.
ERROR specifies a search based on a bit stuffing error.

SearchSearchItemTriggerABusBItemCanData ¶

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:CAN:DATa command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:CAN:DATa? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:CAN:DATa? query and raise an AssertionError if the returned value does not match value.

Properties

.direction: The SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:CAN:DATa:DIRection command.
.qualifier: The SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:CAN:DATa:QUALifier command.
.size: The SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:CAN:DATa:SIZe command.
.value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:CAN:DATa:VALue command.

direction `property` ¶

direction: SearchSearchItemTriggerABusBItemCanDataDirection

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:CAN:DATa:DIRection command.

Description

This command sets the data direction (read, write or nocare) to be used to search on CAN bus data. This only applies if the search condition has been set to IDentifier (using SEARCH:SEARCHX:TRIGGER:A:BUS:BX:CAN:CONDITION). SEARCH is the search number, which is always 1, and B is the bus number (1-2).

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:CAN:DATa:DIRection? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:CAN:DATa:DIRection? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:CAN:DATa:DIRection value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:CAN:DATa:DIRection {READ|WRITE|NOCARE}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:CAN:DATa:DIRection?

Info

READ specifies the read direction.
WRITE specifies the write direction.
NOCARE specifies either a read or write direction.

qualifier `property` ¶

qualifier: SearchSearchItemTriggerABusBItemCanDataQualifier

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:CAN:DATa:QUALifier command.

Description

Sets or returns the CAN data qualifier for a search. SEARCH is the search number and B is the bus number. This only applies if the trigger condition is IDANDDATA or DATA.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:CAN:DATa:QUALifier? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:CAN:DATa:QUALifier? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:CAN:DATa:QUALifier value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:CAN:DATa:QUALifier {LESSThan|MOREThan|UNEQual|LESSEQual|MOREEQual|EQual}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:CAN:DATa:QUALifier?

Info

LESSThan searches for bus data less than the value specified by SEARCH:SEARCHX:TRIGGER:A:BUS:BX:CAN:DATA:VALUE.
MOREThan searches for bus data more than the value specified by SEARCH:SEARCHX:TRIGGER:A:BUS:BX:CAN:DATA:VALUE.
UNEQual searches for bus data not equal to the value specified by SEARCH:SEARCHX:TRIGGER:A:BUS:BX:CAN:DATA:VALUE.
LESSEQual searches for bus data less than or equal to the value specified by SEARCH:SEARCHX:TRIGGER:A:BUS:BX:CAN:DATA:VALUE.
MOREEQual searches for bus data more than or equal to the value specified by SEARCH:SEARCHX:TRIGGER:A:BUS:BX:CAN:DATA:VALUE.
EQual searches for bus data equal to the value specified by SEARCH:SEARCHX:TRIGGER:A:BUS:BX:CAN:DATA:VALUE.

size `property` ¶

size: SearchSearchItemTriggerABusBItemCanDataSize

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:CAN:DATa:SIZe command.

Description

This command sets the length of the data string, in bytes, to be used to search on CAN bus data. This only applies if the search condition has been set to IDANDDATA or DATA (using SEARCH:SEARCHX:TRIGGER:A:BUS:BX:CAN:CONDITION). SEARCH is the search number, which is always 1, and B is the bus number (1-2).

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:CAN:DATa:SIZe? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:CAN:DATa:SIZe? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:CAN:DATa:SIZe value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:CAN:DATa:SIZe <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:CAN:DATa:SIZe?

Info

<NR1> is the data string length in bytes.

value `property` ¶

value: SearchSearchItemTriggerABusBItemCanDataValue

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:CAN:DATa:VALue command.

Description

This command sets the binary data value to be used to search on CAN bus data. This only applies if the search condition has been set to IDANDDATA or DATA (using SEARCH:SEARCHX:TRIGGER:A:BUS:BX:CAN:CONDITION). SEARCH is the search number, which is always 1, and B

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:CAN:DATa:VALue? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:CAN:DATa:VALue? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:CAN:DATa:VALue value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:CAN:DATa:VALue <bin>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:CAN:DATa:VALue?

Info

<bin> is the data in binary format.

SearchSearchItemTriggerABusBItemCanDataDirection ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:CAN:DATa:DIRection command.

Description

This command sets the data direction (read, write or nocare) to be used to search on CAN bus data. This only applies if the search condition has been set to IDentifier (using SEARCH:SEARCHX:TRIGGER:A:BUS:BX:CAN:CONDITION). SEARCH is the search number, which is always 1, and B is the bus number (1-2).

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:CAN:DATa:DIRection? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:CAN:DATa:DIRection? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:CAN:DATa:DIRection value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:CAN:DATa:DIRection {READ|WRITE|NOCARE}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:CAN:DATa:DIRection?

Info

READ specifies the read direction.
WRITE specifies the write direction.
NOCARE specifies either a read or write direction.

SearchSearchItemTriggerABusBItemCanDataQualifier ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:CAN:DATa:QUALifier command.

Description

Sets or returns the CAN data qualifier for a search. SEARCH is the search number and B is the bus number. This only applies if the trigger condition is IDANDDATA or DATA.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:CAN:DATa:QUALifier? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:CAN:DATa:QUALifier? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:CAN:DATa:QUALifier value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:CAN:DATa:QUALifier {LESSThan|MOREThan|UNEQual|LESSEQual|MOREEQual|EQual}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:CAN:DATa:QUALifier?

Info

LESSThan searches for bus data less than the value specified by SEARCH:SEARCHX:TRIGGER:A:BUS:BX:CAN:DATA:VALUE.
MOREThan searches for bus data more than the value specified by SEARCH:SEARCHX:TRIGGER:A:BUS:BX:CAN:DATA:VALUE.
UNEQual searches for bus data not equal to the value specified by SEARCH:SEARCHX:TRIGGER:A:BUS:BX:CAN:DATA:VALUE.
LESSEQual searches for bus data less than or equal to the value specified by SEARCH:SEARCHX:TRIGGER:A:BUS:BX:CAN:DATA:VALUE.
MOREEQual searches for bus data more than or equal to the value specified by SEARCH:SEARCHX:TRIGGER:A:BUS:BX:CAN:DATA:VALUE.
EQual searches for bus data equal to the value specified by SEARCH:SEARCHX:TRIGGER:A:BUS:BX:CAN:DATA:VALUE.

SearchSearchItemTriggerABusBItemCanDataSize ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:CAN:DATa:SIZe command.

Description

This command sets the length of the data string, in bytes, to be used to search on CAN bus data. This only applies if the search condition has been set to IDANDDATA or DATA (using SEARCH:SEARCHX:TRIGGER:A:BUS:BX:CAN:CONDITION). SEARCH is the search number, which is always 1, and B is the bus number (1-2).

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:CAN:DATa:SIZe? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:CAN:DATa:SIZe? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:CAN:DATa:SIZe value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:CAN:DATa:SIZe <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:CAN:DATa:SIZe?

Info

<NR1> is the data string length in bytes.

SearchSearchItemTriggerABusBItemCanDataValue ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:CAN:DATa:VALue command.

Description

This command sets the binary data value to be used to search on CAN bus data. This only applies if the search condition has been set to IDANDDATA or DATA (using SEARCH:SEARCHX:TRIGGER:A:BUS:BX:CAN:CONDITION). SEARCH is the search number, which is always 1, and B

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:CAN:DATa:VALue? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:CAN:DATa:VALue? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:CAN:DATa:VALue value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:CAN:DATa:VALue <bin>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:CAN:DATa:VALue?

Info

<bin> is the data in binary format.

SearchSearchItemTriggerABusBItemCanFrametype ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:CAN:FRAMEtype command.

Description

This command sets the frame type (data, remote, error or overload) to be used to search on CAN bus data. This only applies if the search condition has been set to FRAMEtype (using SEARCH:SEARCHX:TRIGGER:A:BUS:BX:CAN:CONDITION). SEARCH is the search number, which is always 1, and B is the bus number (1-2).

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:CAN:FRAMEtype? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:CAN:FRAMEtype? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:CAN:FRAMEtype value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:CAN:FRAMEtype {DATA|REMote|ERRor|OVERLoad}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:CAN:FRAMEtype?

Info

DATA specifies a data frame.
REMote specifies a remote frame.
ERRor specifies an error frame.
OVERLoad specifies an overload frame.

SearchSearchItemTriggerABusBItemCanIdentifier ¶

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:CAN:IDentifier command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:CAN:IDentifier? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:CAN:IDentifier? query and raise an AssertionError if the returned value does not match value.

Properties

.mode: The SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:CAN:IDentifier:MODe command.
.value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:CAN:IDentifier:VALue command.

mode `property` ¶

mode: SearchSearchItemTriggerABusBItemCanIdentifierMode

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:CAN:IDentifier:MODe command.

Description

Sets or returns the CAN addressing mode for a trigger search to a standard or extended format. SEARCH is the search number and B is the bus number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:CAN:IDentifier:MODe? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:CAN:IDentifier:MODe? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:CAN:IDentifier:MODe value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:CAN:IDentifier:MODe {STandard|EXTended}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:CAN:IDentifier:MODe?

Info

STandard specifies an 11-bit identifier field.
EXTended specifies a 29-bit identifier field.

value `property` ¶

value: SearchSearchItemTriggerABusBItemCanIdentifierValue

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:CAN:IDentifier:VALue command.

Description

This command sets the binary address value to be used to search on CAN bus data. This only applies if the search condition has been set to IDANDDATA or DATA (using SEARCH:SEARCHX:TRIGGER:A:BUS:BX:CAN:CONDITION). SEARCH is the search number, which is always 1, and B is the bus number (1-2).

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:CAN:IDentifier:VALue? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:CAN:IDentifier:VALue? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:CAN:IDentifier:VALue value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:CAN:IDentifier:VALue <bin>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:CAN:IDentifier:VALue?

Info

<bin> is the address in binary format.

SearchSearchItemTriggerABusBItemCanIdentifierMode ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:CAN:IDentifier:MODe command.

Description

Sets or returns the CAN addressing mode for a trigger search to a standard or extended format. SEARCH is the search number and B is the bus number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:CAN:IDentifier:MODe? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:CAN:IDentifier:MODe? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:CAN:IDentifier:MODe value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:CAN:IDentifier:MODe {STandard|EXTended}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:CAN:IDentifier:MODe?

Info

STandard specifies an 11-bit identifier field.
EXTended specifies a 29-bit identifier field.

SearchSearchItemTriggerABusBItemCanIdentifierValue ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:CAN:IDentifier:VALue command.

Description

This command sets the binary address value to be used to search on CAN bus data. This only applies if the search condition has been set to IDANDDATA or DATA (using SEARCH:SEARCHX:TRIGGER:A:BUS:BX:CAN:CONDITION). SEARCH is the search number, which is always 1, and B is the bus number (1-2).

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:CAN:IDentifier:VALue? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:CAN:IDentifier:VALue? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:CAN:IDentifier:VALue value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:CAN:IDentifier:VALue <bin>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:CAN:IDentifier:VALue?

Info

<bin> is the address in binary format.

SearchSearchItemTriggerABusBItemFlexray ¶

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray? query and raise an AssertionError if the returned value does not match value.

Properties

.condition: The SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:CONDition command.
.cyclecount: The SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:CYCLEcount command tree.
.data: The SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:DATa command tree.
.eoftype: The SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:EOFTYPE command.
.errtype: The SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:ERRTYPE command.
.frameid: The SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:FRAMEID command tree.
.frametype: The SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:FRAMEType command.
.header: The SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:HEADER command tree.

condition `property` ¶

condition: SearchSearchItemTriggerABusBItemFlexrayCondition

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:CONDition command.

Description

This command specifies the condition to use when searching on FlexRay bus data (start of frame, frame type, ID, cycle count, header, data, ID and data, EOF, error). SEARCH is the search number, which is always 1, and B is the bus number B1-B2.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:CONDition? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:CONDition? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:CONDition value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:CONDition {SOF|FRAMETypeid|CYCLEcount|HEADer|DATA|IDANDDATA|EOF|ERROR}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:CONDition?

Info

SOF sets the search condition to start of frame.
FRAMETypeid sets the search condition to a frame type id.
CYCLEcount sets the search condition to cycle count.
HEADer sets the search condition to header.
DATA sets the search condition to data.
IDANDDATA sets the search condition to ID and data.
EOF sets the search condition to EOF.
ERROR sets the search condition to an error.

cyclecount `property` ¶

cyclecount: SearchSearchItemTriggerABusBItemFlexrayCyclecount

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:CYCLEcount command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:CYCLEcount? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:CYCLEcount? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.hivalue: The SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:CYCLEcount:HIVALue command.
.qualifier: The SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:CYCLEcount:QUALifier command.
.value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:CYCLEcount:VALue command.

data `property` ¶

data: SearchSearchItemTriggerABusBItemFlexrayData

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:DATa command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:DATa? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:DATa? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.hivalue: The SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:DATa:HIVALue command.
.offset: The SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:DATa:OFFSet command.
.qualifier: The SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:DATa:QUALifier command.
.size: The SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:DATa:SIZe command.
.value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:DATa:VALue command.

eoftype `property` ¶

eoftype: SearchSearchItemTriggerABusBItemFlexrayEoftype

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:EOFTYPE command.

Description

This command specifies which end of file type to use (static, dynamic or any) when searching on the FlexRay bus EOF field. The search condition needs to be set to EOF (using SEARCH:SEARCHX:TRIGGER:A:BUS:BX:FLEXRAY:CONDITION). SEARCH is the search number, which is always 1, and B

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:EOFTYPE? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:EOFTYPE? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:EOFTYPE value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:EOFTYPE {STATic|DYNAMic|ANY}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:EOFTYPE?

Info

STATic sets the FlexRay end of frame type to STATIC.
DYNAMic sets the FlexRay end of frame type to DYNAMIC.
ANY sets the FlexRay end of frame type to ANY type.

errtype `property` ¶

errtype: SearchSearchItemTriggerABusBItemFlexrayErrtype

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:ERRTYPE command.

Description

This command specifies the error type to use when searching on the FlexRay bus signal. The search condition needs to be set to ERROR (using SEARCH:SEARCHX:TRIGGER:A:BUS:BX:FLEXRAY:CONDITION). SEARCH is the search number, which is always 1, and B

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:ERRTYPE? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:ERRTYPE? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:ERRTYPE value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:ERRTYPE {CRCHeader|CRCTrailer|SYNCFrame|STARTupnosync|NULLFRStatic|NULLFRDynamic}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:ERRTYPE?

Info

CRCHeader sets the error type to CRC header.
CRCTrailer sets the error type to CRC trailer.
SYNCFrame sets the error type to sync frame.
STARTupnosync sets the error type to start up with no sync.
NULLFRStatic sets the error type to null frame static.
NULLFRDynamic sets the error type to null frame dynamic.

frameid `property` ¶

frameid: SearchSearchItemTriggerABusBItemFlexrayFrameid

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:FRAMEID command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:FRAMEID? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:FRAMEID? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.hivalue: The SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:FRAMEID:HIVALue command.
.qualifier: The SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:FRAMEID:QUALifier command.
.value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:FRAMEID:VALue command.

frametype `property` ¶

frametype: SearchSearchItemTriggerABusBItemFlexrayFrametype

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:FRAMEType command.

Description

This command specifies the frame type (normal, payload, null, sync or startup) to use when searching on FlexRay bus data. The search condition needs to be set to FRAMEType (using SEARCH:SEARCHX:TRIGGER:A:BUS:BX:FLEXRAY:CONDITION). SEARCH is the search number, which is always 1, and B

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:FRAMEType? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:FRAMEType? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:FRAMEType value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:FRAMEType {NORMal|PAYLoad|NULL|SYNC|STARTup}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:FRAMEType?

Info

NORMal sets the frame type to normal.
PAYLoad sets the frame type to payload.
NULL sets the frame type to NULL.
SYNC sets the frame type to sync.
STARTup sets the frame type to start up.

header `property` ¶

header: SearchSearchItemTriggerABusBItemFlexrayHeader

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:HEADER command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:HEADER? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:HEADER? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.crc: The SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:HEADER:CRC command.
.cyclecount: The SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:HEADER:CYCLEcount command.
.frameid: The SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:HEADER:FRAMEID command.
.indbits: The SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:HEADER:INDBits command.
.paylength: The SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:HEADER:PAYLength command.

SearchSearchItemTriggerABusBItemFlexrayCondition ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:CONDition command.

Description

This command specifies the condition to use when searching on FlexRay bus data (start of frame, frame type, ID, cycle count, header, data, ID and data, EOF, error). SEARCH is the search number, which is always 1, and B is the bus number B1-B2.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:CONDition? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:CONDition? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:CONDition value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:CONDition {SOF|FRAMETypeid|CYCLEcount|HEADer|DATA|IDANDDATA|EOF|ERROR}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:CONDition?

Info

SOF sets the search condition to start of frame.
FRAMETypeid sets the search condition to a frame type id.
CYCLEcount sets the search condition to cycle count.
HEADer sets the search condition to header.
DATA sets the search condition to data.
IDANDDATA sets the search condition to ID and data.
EOF sets the search condition to EOF.
ERROR sets the search condition to an error.

SearchSearchItemTriggerABusBItemFlexrayCyclecount ¶

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:CYCLEcount command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:CYCLEcount? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:CYCLEcount? query and raise an AssertionError if the returned value does not match value.

Properties

.hivalue: The SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:CYCLEcount:HIVALue command.
.qualifier: The SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:CYCLEcount:QUALifier command.
.value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:CYCLEcount:VALue command.

hivalue `property` ¶

hivalue: SearchSearchItemTriggerABusBItemFlexrayCyclecountHivalue

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:CYCLEcount:HIVALue command.

Description

This command specifies the upper data value of the range to be used when searching on the FlexRay bus cycle count field. (Use SEARCH:SEARCHX:TRIGGER:A:BUS:BX:FLEXRAY:CYCLECOUNT:VALUE to set the low value.) The search condition must be set to CYCLEcount (using SEARCH:SEARCHX:TRIGGER:A:BUS:BX:FLEXRAY:CONDITION). SEARCH is the search number, which is always 1, and B

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:CYCLEcount:HIVALue? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:CYCLEcount:HIVALue? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:CYCLEcount:HIVALue value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:CYCLEcount:HIVALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:CYCLEcount:HIVALue?

Info

<QString> is a quoted string that is the cycle count high value.

qualifier `property` ¶

qualifier: SearchSearchItemTriggerABusBItemFlexrayCyclecountQualifier

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:CYCLEcount:QUALifier command.

Description

Sets or returns the FLEXRAY cycle count qualifier.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:CYCLEcount:QUALifier? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:CYCLEcount:QUALifier? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:CYCLEcount:QUALifier value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:CYCLEcount:QUALifier {LESSThan|MOREThan|EQUal|UNEQual|LESSEQual|MOREEQual|INrange|OUTrange}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:CYCLEcount:QUALifier?

value `property` ¶

value: SearchSearchItemTriggerABusBItemFlexrayCyclecountValue

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:CYCLEcount:VALue command.

Description

This command specifies the low data value to be used when searching on the FlexRay bus cycle count field. The search condition must be set to CYCLEcount (using SEARCH:SEARCHX:TRIGGER:A:BUS:BX:FLEXRAY:CONDITION). SEARCH is the search number, which is always 1, and B

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:CYCLEcount:VALue? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:CYCLEcount:VALue? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:CYCLEcount:VALue value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:CYCLEcount:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:CYCLEcount:VALue?

Info

<QString> is a quoted string that is the cycle count binary value.

SearchSearchItemTriggerABusBItemFlexrayCyclecountHivalue ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:CYCLEcount:HIVALue command.

Description

This command specifies the upper data value of the range to be used when searching on the FlexRay bus cycle count field. (Use SEARCH:SEARCHX:TRIGGER:A:BUS:BX:FLEXRAY:CYCLECOUNT:VALUE to set the low value.) The search condition must be set to CYCLEcount (using SEARCH:SEARCHX:TRIGGER:A:BUS:BX:FLEXRAY:CONDITION). SEARCH is the search number, which is always 1, and B

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:CYCLEcount:HIVALue? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:CYCLEcount:HIVALue? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:CYCLEcount:HIVALue value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:CYCLEcount:HIVALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:CYCLEcount:HIVALue?

Info

<QString> is a quoted string that is the cycle count high value.

SearchSearchItemTriggerABusBItemFlexrayCyclecountQualifier ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:CYCLEcount:QUALifier command.

Description

Sets or returns the FLEXRAY cycle count qualifier.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:CYCLEcount:QUALifier? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:CYCLEcount:QUALifier? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:CYCLEcount:QUALifier value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:CYCLEcount:QUALifier {LESSThan|MOREThan|EQUal|UNEQual|LESSEQual|MOREEQual|INrange|OUTrange}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:CYCLEcount:QUALifier?

SearchSearchItemTriggerABusBItemFlexrayCyclecountValue ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:CYCLEcount:VALue command.

Description

This command specifies the low data value to be used when searching on the FlexRay bus cycle count field. The search condition must be set to CYCLEcount (using SEARCH:SEARCHX:TRIGGER:A:BUS:BX:FLEXRAY:CONDITION). SEARCH is the search number, which is always 1, and B

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:CYCLEcount:VALue? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:CYCLEcount:VALue? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:CYCLEcount:VALue value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:CYCLEcount:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:CYCLEcount:VALue?

Info

<QString> is a quoted string that is the cycle count binary value.

SearchSearchItemTriggerABusBItemFlexrayData ¶

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:DATa command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:DATa? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:DATa? query and raise an AssertionError if the returned value does not match value.

Properties

.hivalue: The SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:DATa:HIVALue command.
.offset: The SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:DATa:OFFSet command.
.qualifier: The SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:DATa:QUALifier command.
.size: The SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:DATa:SIZe command.
.value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:DATa:VALue command.

hivalue `property` ¶

hivalue: SearchSearchItemTriggerABusBItemFlexrayDataHivalue

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:DATa:HIVALue command.

Description

This command specifies the high value to use when searching on the FlexRay bus data field. The search condition needs to be set to ID or IDANDDATA (using SEARCH:SEARCHX:TRIGGER:A:BUS:BX:FLEXRAY:CONDITION). SEARCH is the search number, which is always 1, and B

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:DATa:HIVALue? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:DATa:HIVALue? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:DATa:HIVALue value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:DATa:HIVALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:DATa:HIVALue?

Info

<QString> is a quoted string that is the data field high binary value.

offset `property` ¶

offset: SearchSearchItemTriggerABusBItemFlexrayDataOffset

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:DATa:OFFSet command.

Description

This command specifies the offset of the data string in bytes to be used when searching on the FlexRay bus data field. The search condition needs to be set to ID or IDANDDATA (using SEARCH:SEARCHX:TRIGGER:A:BUS:BX:FLEXRAY:CONDITION). SEARCH is the search number, which is always 1, and B

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:DATa:OFFSet? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:DATa:OFFSet? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:DATa:OFFSet value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:DATa:OFFSet <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:DATa:OFFSet?

Info

<NR1> is the data offset in bytes. A byte offset of -1 signifies don’t care, and no byte offset is used. The instrument will search or match any byte value that fits.

qualifier `property` ¶

qualifier: SearchSearchItemTriggerABusBItemFlexrayDataQualifier

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:DATa:QUALifier command.

Description

Sets or returns the FLEXRAY data qualifier.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:DATa:QUALifier? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:DATa:QUALifier? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:DATa:QUALifier value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:DATa:QUALifier {LESSThan|MOREThan|EQUal|UNEQual|LESSEQual|MOREEQual|INrange|OUTrange}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:DATa:QUALifier?

Info

LESSThan sets the FLEXRAY data qualifier to less than.
MOREThan sets the FLEXRAY data qualifier to greater than.
EQUal sets the FLEXRAY data qualifier to equal.
UNEQual sets the FLEXRAY data qualifier to not equal.
LESSEQual sets the FLEXRAY data qualifier to less than or equal.
MOREEQual sets the FLEXRAY data qualifier to greater than or equal.
INrange sets the FLEXRAY data qualifier to in range.
OUTrange sets the FLEXRAY data qualifier to out of range.

size `property` ¶

size: SearchSearchItemTriggerABusBItemFlexrayDataSize

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:DATa:SIZe command.

Description

This command specifies the length of the data string, in bytes, to use when searching on the FlexRay bus data field. The search condition needs to be set to ID or IDANDDATA (using SEARCH:SEARCHX:TRIGGER:A:BUS:BX:FLEXRAY:CONDITION). SEARCH is the search number, which is always 1, and B

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:DATa:SIZe? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:DATa:SIZe? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:DATa:SIZe value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:DATa:SIZe <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:DATa:SIZe?

Info

<NR1> is the length of the data string in bytes. Length range is 1 to 8.

value `property` ¶

value: SearchSearchItemTriggerABusBItemFlexrayDataValue

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:DATa:VALue command.

Description

This command specifies the low value to use when searching on the FlexRay bus data field. The search condition needs to be set to ID or IDANDDATA (using TRIGGER:A:BUS:BX:FLEXRAY:CONDITION). SEARCH is the search number, which is always 1, and B

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:DATa:VALue? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:DATa:VALue? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:DATa:VALue value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:DATa:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:DATa:VALue?

Info

<QString> is a quoted string that is the low binary data string to be used for a FlexRay search if the search condition is set to IDANDDATA.

SearchSearchItemTriggerABusBItemFlexrayDataHivalue ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:DATa:HIVALue command.

Description

This command specifies the high value to use when searching on the FlexRay bus data field. The search condition needs to be set to ID or IDANDDATA (using SEARCH:SEARCHX:TRIGGER:A:BUS:BX:FLEXRAY:CONDITION). SEARCH is the search number, which is always 1, and B

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:DATa:HIVALue? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:DATa:HIVALue? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:DATa:HIVALue value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:DATa:HIVALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:DATa:HIVALue?

Info

<QString> is a quoted string that is the data field high binary value.

SearchSearchItemTriggerABusBItemFlexrayDataOffset ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:DATa:OFFSet command.

Description

This command specifies the offset of the data string in bytes to be used when searching on the FlexRay bus data field. The search condition needs to be set to ID or IDANDDATA (using SEARCH:SEARCHX:TRIGGER:A:BUS:BX:FLEXRAY:CONDITION). SEARCH is the search number, which is always 1, and B

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:DATa:OFFSet? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:DATa:OFFSet? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:DATa:OFFSet value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:DATa:OFFSet <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:DATa:OFFSet?

Info

<NR1> is the data offset in bytes. A byte offset of -1 signifies don’t care, and no byte offset is used. The instrument will search or match any byte value that fits.

SearchSearchItemTriggerABusBItemFlexrayDataQualifier ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:DATa:QUALifier command.

Description

Sets or returns the FLEXRAY data qualifier.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:DATa:QUALifier? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:DATa:QUALifier? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:DATa:QUALifier value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:DATa:QUALifier {LESSThan|MOREThan|EQUal|UNEQual|LESSEQual|MOREEQual|INrange|OUTrange}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:DATa:QUALifier?

Info

LESSThan sets the FLEXRAY data qualifier to less than.
MOREThan sets the FLEXRAY data qualifier to greater than.
EQUal sets the FLEXRAY data qualifier to equal.
UNEQual sets the FLEXRAY data qualifier to not equal.
LESSEQual sets the FLEXRAY data qualifier to less than or equal.
MOREEQual sets the FLEXRAY data qualifier to greater than or equal.
INrange sets the FLEXRAY data qualifier to in range.
OUTrange sets the FLEXRAY data qualifier to out of range.

SearchSearchItemTriggerABusBItemFlexrayDataSize ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:DATa:SIZe command.

Description

This command specifies the length of the data string, in bytes, to use when searching on the FlexRay bus data field. The search condition needs to be set to ID or IDANDDATA (using SEARCH:SEARCHX:TRIGGER:A:BUS:BX:FLEXRAY:CONDITION). SEARCH is the search number, which is always 1, and B

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:DATa:SIZe? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:DATa:SIZe? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:DATa:SIZe value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:DATa:SIZe <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:DATa:SIZe?

Info

<NR1> is the length of the data string in bytes. Length range is 1 to 8.

SearchSearchItemTriggerABusBItemFlexrayDataValue ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:DATa:VALue command.

Description

This command specifies the low value to use when searching on the FlexRay bus data field. The search condition needs to be set to ID or IDANDDATA (using TRIGGER:A:BUS:BX:FLEXRAY:CONDITION). SEARCH is the search number, which is always 1, and B

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:DATa:VALue? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:DATa:VALue? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:DATa:VALue value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:DATa:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:DATa:VALue?

Info

<QString> is a quoted string that is the low binary data string to be used for a FlexRay search if the search condition is set to IDANDDATA.

SearchSearchItemTriggerABusBItemFlexrayEoftype ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:EOFTYPE command.

Description

This command specifies which end of file type to use (static, dynamic or any) when searching on the FlexRay bus EOF field. The search condition needs to be set to EOF (using SEARCH:SEARCHX:TRIGGER:A:BUS:BX:FLEXRAY:CONDITION). SEARCH is the search number, which is always 1, and B

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:EOFTYPE? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:EOFTYPE? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:EOFTYPE value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:EOFTYPE {STATic|DYNAMic|ANY}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:EOFTYPE?

Info

STATic sets the FlexRay end of frame type to STATIC.
DYNAMic sets the FlexRay end of frame type to DYNAMIC.
ANY sets the FlexRay end of frame type to ANY type.

SearchSearchItemTriggerABusBItemFlexrayErrtype ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:ERRTYPE command.

Description

This command specifies the error type to use when searching on the FlexRay bus signal. The search condition needs to be set to ERROR (using SEARCH:SEARCHX:TRIGGER:A:BUS:BX:FLEXRAY:CONDITION). SEARCH is the search number, which is always 1, and B

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:ERRTYPE? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:ERRTYPE? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:ERRTYPE value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:ERRTYPE {CRCHeader|CRCTrailer|SYNCFrame|STARTupnosync|NULLFRStatic|NULLFRDynamic}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:ERRTYPE?

Info

CRCHeader sets the error type to CRC header.
CRCTrailer sets the error type to CRC trailer.
SYNCFrame sets the error type to sync frame.
STARTupnosync sets the error type to start up with no sync.
NULLFRStatic sets the error type to null frame static.
NULLFRDynamic sets the error type to null frame dynamic.

SearchSearchItemTriggerABusBItemFlexrayFrameid ¶

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:FRAMEID command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:FRAMEID? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:FRAMEID? query and raise an AssertionError if the returned value does not match value.

Properties

.hivalue: The SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:FRAMEID:HIVALue command.
.qualifier: The SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:FRAMEID:QUALifier command.
.value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:FRAMEID:VALue command.

hivalue `property` ¶

hivalue: SearchSearchItemTriggerABusBItemFlexrayFrameidHivalue

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:FRAMEID:HIVALue command.

Description

This command specifies the high value to use when searching on the FlexRay bus frame ID field. (Use SEARCH:SEARCHX:TRIGGER:A:BUS:BX:FLEXRAY:FRAMEID:VALUE to set the low value.) The search condition needs to be set to IDentifier (using SEARCH:SEARCHX:TRIGGER:A:BUS:BX:FLEXRAY:CONDITION). SEARCH is the search number, which is always 1, and B

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:FRAMEID:HIVALue? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:FRAMEID:HIVALue? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:FRAMEID:HIVALue value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:FRAMEID:HIVALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:FRAMEID:HIVALue?

qualifier `property` ¶

qualifier: SearchSearchItemTriggerABusBItemFlexrayFrameidQualifier

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:FRAMEID:QUALifier command.

Description

Sets or returns the FLEXRAY frame ID qualifier.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:FRAMEID:QUALifier? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:FRAMEID:QUALifier? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:FRAMEID:QUALifier value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:FRAMEID:QUALifier {LESSThan|MOREThan|EQUal|UNEQual|LESSEQual|MOREEQual|INrange|OUTrange}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:FRAMEID:QUALifier?

Info

LESSThan sets the frame id qualifier to LESSThan.
MOREThan sets the frame id qualifier to MOREThan.
QUal sets the frame id qualifier to QUal.
UNEQual sets the frame id qualifier to UNEQual.
LESSEQual sets the frame id qualifier to LESSEQual.
MOREEQual sets the frame id qualifier to MOREEQual.
INrange sets the frame id qualifier to INrange.
OUTrange sets the frame id qualifier to OUTrange.

value `property` ¶

value: SearchSearchItemTriggerABusBItemFlexrayFrameidValue

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:FRAMEID:VALue command.

Description

This command specifies the low value to use when searching on the FlexRay bus frame ID field. (Use SEARCH:SEARCHX:TRIGGER:A:BUS:BX:FLEXRAY:FRAMEID:HIVALUE to set the high value.) The search condition needs to be set to IDentifier (using SEARCH:SEARCHX:TRIGGER:A:BUS:BX:FLEXRAY:CONDITION). SEARCH is the search number, which is always 1, and B

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:FRAMEID:VALue? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:FRAMEID:VALue? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:FRAMEID:VALue value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:FRAMEID:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:FRAMEID:VALue?

Info

<QString> is a quoted string representing the binary data string used for FlexRay frame ID low value.

SearchSearchItemTriggerABusBItemFlexrayFrameidHivalue ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:FRAMEID:HIVALue command.

Description

This command specifies the high value to use when searching on the FlexRay bus frame ID field. (Use SEARCH:SEARCHX:TRIGGER:A:BUS:BX:FLEXRAY:FRAMEID:VALUE to set the low value.) The search condition needs to be set to IDentifier (using SEARCH:SEARCHX:TRIGGER:A:BUS:BX:FLEXRAY:CONDITION). SEARCH is the search number, which is always 1, and B

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:FRAMEID:HIVALue? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:FRAMEID:HIVALue? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:FRAMEID:HIVALue value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:FRAMEID:HIVALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:FRAMEID:HIVALue?

SearchSearchItemTriggerABusBItemFlexrayFrameidQualifier ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:FRAMEID:QUALifier command.

Description

Sets or returns the FLEXRAY frame ID qualifier.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:FRAMEID:QUALifier? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:FRAMEID:QUALifier? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:FRAMEID:QUALifier value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:FRAMEID:QUALifier {LESSThan|MOREThan|EQUal|UNEQual|LESSEQual|MOREEQual|INrange|OUTrange}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:FRAMEID:QUALifier?

Info

LESSThan sets the frame id qualifier to LESSThan.
MOREThan sets the frame id qualifier to MOREThan.
QUal sets the frame id qualifier to QUal.
UNEQual sets the frame id qualifier to UNEQual.
LESSEQual sets the frame id qualifier to LESSEQual.
MOREEQual sets the frame id qualifier to MOREEQual.
INrange sets the frame id qualifier to INrange.
OUTrange sets the frame id qualifier to OUTrange.

SearchSearchItemTriggerABusBItemFlexrayFrameidValue ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:FRAMEID:VALue command.

Description

This command specifies the low value to use when searching on the FlexRay bus frame ID field. (Use SEARCH:SEARCHX:TRIGGER:A:BUS:BX:FLEXRAY:FRAMEID:HIVALUE to set the high value.) The search condition needs to be set to IDentifier (using SEARCH:SEARCHX:TRIGGER:A:BUS:BX:FLEXRAY:CONDITION). SEARCH is the search number, which is always 1, and B

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:FRAMEID:VALue? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:FRAMEID:VALue? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:FRAMEID:VALue value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:FRAMEID:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:FRAMEID:VALue?

Info

<QString> is a quoted string representing the binary data string used for FlexRay frame ID low value.

SearchSearchItemTriggerABusBItemFlexrayFrametype ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:FRAMEType command.

Description

This command specifies the frame type (normal, payload, null, sync or startup) to use when searching on FlexRay bus data. The search condition needs to be set to FRAMEType (using SEARCH:SEARCHX:TRIGGER:A:BUS:BX:FLEXRAY:CONDITION). SEARCH is the search number, which is always 1, and B

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:FRAMEType? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:FRAMEType? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:FRAMEType value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:FRAMEType {NORMal|PAYLoad|NULL|SYNC|STARTup}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:FRAMEType?

Info

NORMal sets the frame type to normal.
PAYLoad sets the frame type to payload.
NULL sets the frame type to NULL.
SYNC sets the frame type to sync.
STARTup sets the frame type to start up.

SearchSearchItemTriggerABusBItemFlexrayHeader ¶

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:HEADER command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:HEADER? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:HEADER? query and raise an AssertionError if the returned value does not match value.

Properties

.crc: The SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:HEADER:CRC command.
.cyclecount: The SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:HEADER:CYCLEcount command.
.frameid: The SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:HEADER:FRAMEID command.
.indbits: The SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:HEADER:INDBits command.
.paylength: The SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:HEADER:PAYLength command.

crc `property` ¶

crc: SearchSearchItemTriggerABusBItemFlexrayHeaderCrc

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:HEADER:CRC command.

Description

This command specifies the CRC portion of the binary header string to be used when searching on FlexRay bus data. The search condition needs to be set to HEADer (using SEARCH:SEARCHX:TRIGGER:A:BUS:BX:FLEXRAY:CONDITION). SEARCH is the search number, which is always 1, B

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:HEADER:CRC? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:HEADER:CRC? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:HEADER:CRC value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:HEADER:CRC <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:HEADER:CRC?

Info

<QString> is a quoted string representing the CRC portion of the binary header string used for FlexRay search.

cyclecount `property` ¶

cyclecount: SearchSearchItemTriggerABusBItemFlexrayHeaderCyclecount

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:HEADER:CYCLEcount command.

Description

This command specifies to use the cycle count portion of the binary header string when searching on the FlexRay bus header. The search condition needs to be set to HEADer (using SEARCH:SEARCHX:TRIGGER:A:BUS:BX:FLEXRAY:CONDITION). SEARCH is the search number, which is always 1, and B

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:HEADER:CYCLEcount? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:HEADER:CYCLEcount? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:HEADER:CYCLEcount value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:HEADER:CYCLEcount <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:HEADER:CYCLEcount?

Info

<QString> is a quoted string representing the cycle count portion of the binary header string used for FlexRay search.

frameid `property` ¶

frameid: SearchSearchItemTriggerABusBItemFlexrayHeaderFrameid

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:HEADER:FRAMEID command.

Description

This command specifies to use the frame ID portion of the binary header string when searching on the FlexRay bus header. The search condition needs to be set to HEADer (using SEARCH:SEARCHX:TRIGGER:A:BUS:BX:FLEXRAY:CONDITION). SEARCH is the search number, which is always 1, and B.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:HEADER:FRAMEID? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:HEADER:FRAMEID? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:HEADER:FRAMEID value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:HEADER:FRAMEID <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:HEADER:FRAMEID?

Info

<QString> is a quoted string representing the frame ID portion of the binary header string used for a FlexRay search.

indbits `property` ¶

indbits: SearchSearchItemTriggerABusBItemFlexrayHeaderIndbits

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:HEADER:INDBits command.

Description

This command specifies to use the indicator bits portion of the binary header string when searching on the FlexRay bus header. The search condition needs to be set to HEADer (using SEARCH:SEARCHX:TRIGGER:A:BUS:BX:FLEXRAY:CONDITION). SEARCH is the search number, which is always 1, and B

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:HEADER:INDBits? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:HEADER:INDBits? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:HEADER:INDBits value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:HEADER:INDBits <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:HEADER:INDBits?

paylength `property` ¶

paylength: SearchSearchItemTriggerABusBItemFlexrayHeaderPaylength

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:HEADER:PAYLength command.

Description

This command specifies to use the payload length portion of the binary header string when searching on the FlexRay bus header. This command specifies the payload length to be used in a FlexRay search. The search condition needs to be set to HEADer (using SEARCH:SEARCHX:TRIGGER:A:BUS:BX:FLEXRAY:CONDITION). SEARCH is the search number, which is always 1, and B

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:HEADER:PAYLength? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:HEADER:PAYLength? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:HEADER:PAYLength value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:HEADER:PAYLength <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:HEADER:PAYLength?

Info

<QString> is a quoted string representing the payload length portion of the binary header string used for a FlexRay search.

SearchSearchItemTriggerABusBItemFlexrayHeaderCrc ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:HEADER:CRC command.

Description

This command specifies the CRC portion of the binary header string to be used when searching on FlexRay bus data. The search condition needs to be set to HEADer (using SEARCH:SEARCHX:TRIGGER:A:BUS:BX:FLEXRAY:CONDITION). SEARCH is the search number, which is always 1, B

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:HEADER:CRC? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:HEADER:CRC? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:HEADER:CRC value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:HEADER:CRC <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:HEADER:CRC?

Info

<QString> is a quoted string representing the CRC portion of the binary header string used for FlexRay search.

SearchSearchItemTriggerABusBItemFlexrayHeaderCyclecount ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:HEADER:CYCLEcount command.

Description

This command specifies to use the cycle count portion of the binary header string when searching on the FlexRay bus header. The search condition needs to be set to HEADer (using SEARCH:SEARCHX:TRIGGER:A:BUS:BX:FLEXRAY:CONDITION). SEARCH is the search number, which is always 1, and B

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:HEADER:CYCLEcount? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:HEADER:CYCLEcount? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:HEADER:CYCLEcount value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:HEADER:CYCLEcount <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:HEADER:CYCLEcount?

Info

<QString> is a quoted string representing the cycle count portion of the binary header string used for FlexRay search.

SearchSearchItemTriggerABusBItemFlexrayHeaderFrameid ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:HEADER:FRAMEID command.

Description

This command specifies to use the frame ID portion of the binary header string when searching on the FlexRay bus header. The search condition needs to be set to HEADer (using SEARCH:SEARCHX:TRIGGER:A:BUS:BX:FLEXRAY:CONDITION). SEARCH is the search number, which is always 1, and B.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:HEADER:FRAMEID? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:HEADER:FRAMEID? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:HEADER:FRAMEID value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:HEADER:FRAMEID <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:HEADER:FRAMEID?

Info

<QString> is a quoted string representing the frame ID portion of the binary header string used for a FlexRay search.

SearchSearchItemTriggerABusBItemFlexrayHeaderIndbits ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:HEADER:INDBits command.

Description

This command specifies to use the indicator bits portion of the binary header string when searching on the FlexRay bus header. The search condition needs to be set to HEADer (using SEARCH:SEARCHX:TRIGGER:A:BUS:BX:FLEXRAY:CONDITION). SEARCH is the search number, which is always 1, and B

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:HEADER:INDBits? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:HEADER:INDBits? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:HEADER:INDBits value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:HEADER:INDBits <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:HEADER:INDBits?

SearchSearchItemTriggerABusBItemFlexrayHeaderPaylength ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:HEADER:PAYLength command.

Description

This command specifies to use the payload length portion of the binary header string when searching on the FlexRay bus header. This command specifies the payload length to be used in a FlexRay search. The search condition needs to be set to HEADer (using SEARCH:SEARCHX:TRIGGER:A:BUS:BX:FLEXRAY:CONDITION). SEARCH is the search number, which is always 1, and B

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:HEADER:PAYLength? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:HEADER:PAYLength? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:HEADER:PAYLength value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:HEADER:PAYLength <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:FLEXray:HEADER:PAYLength?

Info

<QString> is a quoted string representing the payload length portion of the binary header string used for a FlexRay search.

SearchSearchItemTriggerABusBItemI2c ¶

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:I2C command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:I2C? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:I2C? query and raise an AssertionError if the returned value does not match value.

Properties

.address: The SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:I2C:ADDRess command tree.
.condition: The SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:I2C:CONDition command.
.data: The SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:I2C:DATa command tree.

address `property` ¶

address: SearchSearchItemTriggerABusBItemI2cAddress

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:I2C:ADDRess command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:I2C:ADDRess? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:I2C:ADDRess? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.mode: The SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:I2C:ADDRess:MODe command.
.type: The SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:I2C:ADDRess:TYPe command.
.value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:I2C:ADDRess:VALue command.

condition `property` ¶

condition: SearchSearchItemTriggerABusBItemI2cCondition

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:I2C:CONDition command.

Description

This command specifies the search condition to use for an I2C search. SEARCH is the search number, which is always 1, and B

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:I2C:CONDition? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:I2C:CONDition? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:I2C:CONDition value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:I2C:CONDition {STARt|STOP|REPEATstart|ACKMISS|ADDRess|DATA|ADDRANDDATA}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:I2C:CONDition?

Info

STARt specifies a search based on a start condition.
STOP specifies a search based on a stop condition.
REPEATstart specifies a search based on a repeat of start condition.
ACKMISS specifies a search based on a missing acknowledgement condition.
ADDRess specifies a search based on an address.
DATA specifies a search based on a data condition.
ADDRANDDATA specifies a search based on an address and data condition.

data `property` ¶

data: SearchSearchItemTriggerABusBItemI2cData

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:I2C:DATa command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:I2C:DATa? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:I2C:DATa? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.direction: The SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:I2C:DATa:DIRection command.
.size: The SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:I2C:DATa:SIZe command.
.value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:I2C:DATa:VALue command.

SearchSearchItemTriggerABusBItemI2cAddress ¶

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:I2C:ADDRess command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:I2C:ADDRess? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:I2C:ADDRess? query and raise an AssertionError if the returned value does not match value.

Properties

.mode: The SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:I2C:ADDRess:MODe command.
.type: The SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:I2C:ADDRess:TYPe command.
.value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:I2C:ADDRess:VALue command.

mode `property` ¶

mode: SearchSearchItemTriggerABusBItemI2cAddressMode

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:I2C:ADDRess:MODe command.

Description

This command specifies the I2C address mode to be used in an I2C search: either 7 or 10-Bit. SEARCH is the search number and B SEARCH is the search number, which is always 1, and B

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:I2C:ADDRess:MODe? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:I2C:ADDRess:MODe? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:I2C:ADDRess:MODe value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:I2C:ADDRess:MODe {ADDR7|ADDR10}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:I2C:ADDRess:MODe?

Info

ADDR7 specifies 7-bit addresses.
ADDR10 specifies 10-bit addresses.

type `property` ¶

type: SearchSearchItemTriggerABusBItemI2cAddressType

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:I2C:ADDRess:TYPe command.

Description

This command specifies the I2C address type to be used in an I2C search. SEARCH is the search number, which is always 1, and B

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:I2C:ADDRess:TYPe? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:I2C:ADDRess:TYPe? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:I2C:ADDRess:TYPe value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:I2C:ADDRess:TYPe {GENeralcall|STARtbyte|HSmode|EEPROM|USER}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:I2C:ADDRess:TYPe?

Info

GENeralcall specifies the GENeralcall address type.
STARtbyte specifies the STARtbyte address type.
HSmode specifies the HSmode address type.
EEPROM specifies the EEPROM address type.
USER specifies a user address.

value `property` ¶

value: SearchSearchItemTriggerABusBItemI2cAddressValue

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:I2C:ADDRess:VALue command.

Description

This command specifies the address value to be used in an I2C search if the search condition is ADDRess or ADDRANDDATA (address and data). SEARCH is the search number, which is always 1, and B

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:I2C:ADDRess:VALue? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:I2C:ADDRess:VALue? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:I2C:ADDRess:VALue value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:I2C:ADDRess:VALue <bin>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:I2C:ADDRess:VALue?

Info

<bin> is the address in binary format.

SearchSearchItemTriggerABusBItemI2cAddressMode ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:I2C:ADDRess:MODe command.

Description

This command specifies the I2C address mode to be used in an I2C search: either 7 or 10-Bit. SEARCH is the search number and B SEARCH is the search number, which is always 1, and B

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:I2C:ADDRess:MODe? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:I2C:ADDRess:MODe? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:I2C:ADDRess:MODe value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:I2C:ADDRess:MODe {ADDR7|ADDR10}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:I2C:ADDRess:MODe?

Info

ADDR7 specifies 7-bit addresses.
ADDR10 specifies 10-bit addresses.

SearchSearchItemTriggerABusBItemI2cAddressType ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:I2C:ADDRess:TYPe command.

Description

This command specifies the I2C address type to be used in an I2C search. SEARCH is the search number, which is always 1, and B

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:I2C:ADDRess:TYPe? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:I2C:ADDRess:TYPe? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:I2C:ADDRess:TYPe value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:I2C:ADDRess:TYPe {GENeralcall|STARtbyte|HSmode|EEPROM|USER}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:I2C:ADDRess:TYPe?

Info

GENeralcall specifies the GENeralcall address type.
STARtbyte specifies the STARtbyte address type.
HSmode specifies the HSmode address type.
EEPROM specifies the EEPROM address type.
USER specifies a user address.

SearchSearchItemTriggerABusBItemI2cAddressValue ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:I2C:ADDRess:VALue command.

Description

This command specifies the address value to be used in an I2C search if the search condition is ADDRess or ADDRANDDATA (address and data). SEARCH is the search number, which is always 1, and B

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:I2C:ADDRess:VALue? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:I2C:ADDRess:VALue? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:I2C:ADDRess:VALue value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:I2C:ADDRess:VALue <bin>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:I2C:ADDRess:VALue?

Info

<bin> is the address in binary format.

SearchSearchItemTriggerABusBItemI2cCondition ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:I2C:CONDition command.

Description

This command specifies the search condition to use for an I2C search. SEARCH is the search number, which is always 1, and B

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:I2C:CONDition? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:I2C:CONDition? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:I2C:CONDition value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:I2C:CONDition {STARt|STOP|REPEATstart|ACKMISS|ADDRess|DATA|ADDRANDDATA}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:I2C:CONDition?

Info

STARt specifies a search based on a start condition.
STOP specifies a search based on a stop condition.
REPEATstart specifies a search based on a repeat of start condition.
ACKMISS specifies a search based on a missing acknowledgement condition.
ADDRess specifies a search based on an address.
DATA specifies a search based on a data condition.
ADDRANDDATA specifies a search based on an address and data condition.

SearchSearchItemTriggerABusBItemI2cData ¶

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:I2C:DATa command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:I2C:DATa? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:I2C:DATa? query and raise an AssertionError if the returned value does not match value.

Properties

.direction: The SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:I2C:DATa:DIRection command.
.size: The SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:I2C:DATa:SIZe command.
.value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:I2C:DATa:VALue command.

direction `property` ¶

direction: SearchSearchItemTriggerABusBItemI2cDataDirection

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:I2C:DATa:DIRection command.

Description

This command specifies the data direction to use for an I2C search: either read, write, or either. SEARCH is the search number, which is always 1, and B

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:I2C:DATa:DIRection? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:I2C:DATa:DIRection? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:I2C:DATa:DIRection value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:I2C:DATa:DIRection {READ|WRITE|NOCARE}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:I2C:DATa:DIRection?

Info

READ specifies a read condition.
WRITE specifies a write condition.
NOCARE specifies either a read or write condition.

size `property` ¶

size: SearchSearchItemTriggerABusBItemI2cDataSize

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:I2C:DATa:SIZe command.

Description

This command specifies the length of the data string, in bytes, to be used for an I2C search, if the search condition is set to DATA or ADDRANDDATA (address and data). SEARCH is the search number, which is always 1, and B

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:I2C:DATa:SIZe? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:I2C:DATa:SIZe? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:I2C:DATa:SIZe value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:I2C:DATa:SIZe <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:I2C:DATa:SIZe?

Info

<NR1> is the data string length in bytes.

value `property` ¶

value: SearchSearchItemTriggerABusBItemI2cDataValue

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:I2C:DATa:VALue command.

Description

This command specifies the data value to be used in an I2C search, if the search condition is set to DATA or ADDRANDDATA (address and data). SEARCH is the search number, which is always 1, and B

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:I2C:DATa:VALue? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:I2C:DATa:VALue? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:I2C:DATa:VALue value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:I2C:DATa:VALue <bin>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:I2C:DATa:VALue?

Info

<bin> is the data in binary format.

SearchSearchItemTriggerABusBItemI2cDataDirection ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:I2C:DATa:DIRection command.

Description

This command specifies the data direction to use for an I2C search: either read, write, or either. SEARCH is the search number, which is always 1, and B

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:I2C:DATa:DIRection? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:I2C:DATa:DIRection? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:I2C:DATa:DIRection value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:I2C:DATa:DIRection {READ|WRITE|NOCARE}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:I2C:DATa:DIRection?

Info

READ specifies a read condition.
WRITE specifies a write condition.
NOCARE specifies either a read or write condition.

SearchSearchItemTriggerABusBItemI2cDataSize ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:I2C:DATa:SIZe command.

Description

This command specifies the length of the data string, in bytes, to be used for an I2C search, if the search condition is set to DATA or ADDRANDDATA (address and data). SEARCH is the search number, which is always 1, and B

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:I2C:DATa:SIZe? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:I2C:DATa:SIZe? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:I2C:DATa:SIZe value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:I2C:DATa:SIZe <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:I2C:DATa:SIZe?

Info

<NR1> is the data string length in bytes.

SearchSearchItemTriggerABusBItemI2cDataValue ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:I2C:DATa:VALue command.

Description

This command specifies the data value to be used in an I2C search, if the search condition is set to DATA or ADDRANDDATA (address and data). SEARCH is the search number, which is always 1, and B

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:I2C:DATa:VALue? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:I2C:DATa:VALue? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:I2C:DATa:VALue value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:I2C:DATa:VALue <bin>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:I2C:DATa:VALue?

Info

<bin> is the data in binary format.

SearchSearchItemTriggerABusBItemLin ¶

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:LIN command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:LIN? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:LIN? query and raise an AssertionError if the returned value does not match value.

Properties

.condition: The SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:LIN:CONDition command.
.data: The SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:LIN:DATa command tree.
.errtype: The SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:LIN:ERRTYPE command.
.identifier: The SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:LIN:IDentifier command tree.

condition `property` ¶

condition: SearchSearchItemTriggerABusBItemLinCondition

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:LIN:CONDition command.

Description

This command specifies the search condition for a LIN search. SEARCH is the search number, which is always 1, and B

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:LIN:CONDition? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:LIN:CONDition? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:LIN:CONDition value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:LIN:CONDition {SYNCField|IDentifier|DATA|IDANDDATA|WAKEup|SLEEP|ERROR}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:LIN:CONDition?

Info

SYNCField specifies to search on the sync field.
IDentifier specifies to search on the identifier.
DATA specifies to search on the data.
IDANDDATA specifies to search on the identifier and the data.
WAKEup specifies to search on wake up.
SLEEP specifies to search on sleep.
ERROR specifies to search on errors.

data `property` ¶

data: SearchSearchItemTriggerABusBItemLinData

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:LIN:DATa command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:LIN:DATa? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:LIN:DATa? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.hivalue: The SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:LIN:DATa:HIVALue command.
.qualifier: The SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:LIN:DATa:QUALifier command.
.size: The SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:LIN:DATa:SIZe command.
.value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:LIN:DATa:VALue command.

errtype `property` ¶

errtype: SearchSearchItemTriggerABusBItemLinErrtype

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:LIN:ERRTYPE command.

Description

Sets or returns the error type used for a LIN Search.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:LIN:ERRTYPE? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:LIN:ERRTYPE? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:LIN:ERRTYPE value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:LIN:ERRTYPE {SYNC|PARity|CHecksum}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:LIN:ERRTYPE?

Info

SYNC specifies a sync error type.
PARity specifies a parity error type.
CHecksum specifies a checksum error type.

identifier `property` ¶

identifier: SearchSearchItemTriggerABusBItemLinIdentifier

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:LIN:IDentifier command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:LIN:IDentifier? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:LIN:IDentifier? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:LIN:IDentifier:VALue command.

SearchSearchItemTriggerABusBItemLinCondition ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:LIN:CONDition command.

Description

This command specifies the search condition for a LIN search. SEARCH is the search number, which is always 1, and B

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:LIN:CONDition? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:LIN:CONDition? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:LIN:CONDition value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:LIN:CONDition {SYNCField|IDentifier|DATA|IDANDDATA|WAKEup|SLEEP|ERROR}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:LIN:CONDition?

Info

SYNCField specifies to search on the sync field.
IDentifier specifies to search on the identifier.
DATA specifies to search on the data.
IDANDDATA specifies to search on the identifier and the data.
WAKEup specifies to search on wake up.
SLEEP specifies to search on sleep.
ERROR specifies to search on errors.

SearchSearchItemTriggerABusBItemLinData ¶

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:LIN:DATa command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:LIN:DATa? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:LIN:DATa? query and raise an AssertionError if the returned value does not match value.

Properties

.hivalue: The SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:LIN:DATa:HIVALue command.
.qualifier: The SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:LIN:DATa:QUALifier command.
.size: The SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:LIN:DATa:SIZe command.
.value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:LIN:DATa:VALue command.

hivalue `property` ¶

hivalue: SearchSearchItemTriggerABusBItemLinDataHivalue

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:LIN:DATa:HIVALue command.

Description

This command specifies the high data value to be used in a LIN search, if the search condition is set to IDentifier or IDANDDATA (identifier and data). SEARCH is the search number, which is always 1, and B

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:LIN:DATa:HIVALue? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:LIN:DATa:HIVALue? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:LIN:DATa:HIVALue value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:LIN:DATa:HIVALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:LIN:DATa:HIVALue?

Info

<QString> is a quoted string of 1s, 0s, or Xs representing the binary data string to be used in a LIN search if the search condition is IDentifier or IDANDDATA (identifier and data).

qualifier `property` ¶

qualifier: SearchSearchItemTriggerABusBItemLinDataQualifier

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:LIN:DATa:QUALifier command.

Description

Sets or returns the LIN data qualifier. This only applies if the trigger condition is IDANDDATA or DATA.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:LIN:DATa:QUALifier? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:LIN:DATa:QUALifier? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:LIN:DATa:QUALifier value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:LIN:DATa:QUALifier {LESSThan|MOREThan|EQUal|UNEQual|LESSEQual|MOREEQual|INrange|OUTrange}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:LIN:DATa:QUALifier?

Info

LESSThan sets the LIN data qualifier to less than.
MOREThan sets the LIN data qualifier to greater than.
EQUal sets the LIN data qualifier to equal.
UNEQual sets the LIN data qualifier to not equal.
LESSEQual sets the LIN data qualifier to less than or equal.
MOREEQual sets the LIN data qualifier to more than or equal.
INrange sets the LIN data qualifier to in range.
OUTrange sets the LIN data qualifier to out of range.

size `property` ¶

size: SearchSearchItemTriggerABusBItemLinDataSize

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:LIN:DATa:SIZe command.

Description

This command specifies the length of the data string, in bytes, to be used in a LIN search, if the search condition is set to IDentifier or IDANDDATA (identifier and data). SEARCH is the search number, which is always 1, and B

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:LIN:DATa:SIZe? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:LIN:DATa:SIZe? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:LIN:DATa:SIZe value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:LIN:DATa:SIZe <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:LIN:DATa:SIZe?

Info

<NR1> is the length of the data in bytes.

value `property` ¶

value: SearchSearchItemTriggerABusBItemLinDataValue

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:LIN:DATa:VALue command.

Description

This command specifies the data value to be used in a LIN search if the search condition is set to IDentifier or IDANDDATA (identifier and data). SEARCH is the search number, which is always 1, and B

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:LIN:DATa:VALue? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:LIN:DATa:VALue? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:LIN:DATa:VALue value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:LIN:DATa:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:LIN:DATa:VALue?

Info

<QString> is the binary data string for the search.

SearchSearchItemTriggerABusBItemLinDataHivalue ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:LIN:DATa:HIVALue command.

Description

This command specifies the high data value to be used in a LIN search, if the search condition is set to IDentifier or IDANDDATA (identifier and data). SEARCH is the search number, which is always 1, and B

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:LIN:DATa:HIVALue? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:LIN:DATa:HIVALue? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:LIN:DATa:HIVALue value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:LIN:DATa:HIVALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:LIN:DATa:HIVALue?

Info

<QString> is a quoted string of 1s, 0s, or Xs representing the binary data string to be used in a LIN search if the search condition is IDentifier or IDANDDATA (identifier and data).

SearchSearchItemTriggerABusBItemLinDataQualifier ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:LIN:DATa:QUALifier command.

Description

Sets or returns the LIN data qualifier. This only applies if the trigger condition is IDANDDATA or DATA.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:LIN:DATa:QUALifier? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:LIN:DATa:QUALifier? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:LIN:DATa:QUALifier value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:LIN:DATa:QUALifier {LESSThan|MOREThan|EQUal|UNEQual|LESSEQual|MOREEQual|INrange|OUTrange}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:LIN:DATa:QUALifier?

Info

LESSThan sets the LIN data qualifier to less than.
MOREThan sets the LIN data qualifier to greater than.
EQUal sets the LIN data qualifier to equal.
UNEQual sets the LIN data qualifier to not equal.
LESSEQual sets the LIN data qualifier to less than or equal.
MOREEQual sets the LIN data qualifier to more than or equal.
INrange sets the LIN data qualifier to in range.
OUTrange sets the LIN data qualifier to out of range.

SearchSearchItemTriggerABusBItemLinDataSize ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:LIN:DATa:SIZe command.

Description

This command specifies the length of the data string, in bytes, to be used in a LIN search, if the search condition is set to IDentifier or IDANDDATA (identifier and data). SEARCH is the search number, which is always 1, and B

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:LIN:DATa:SIZe? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:LIN:DATa:SIZe? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:LIN:DATa:SIZe value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:LIN:DATa:SIZe <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:LIN:DATa:SIZe?

Info

<NR1> is the length of the data in bytes.

SearchSearchItemTriggerABusBItemLinDataValue ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:LIN:DATa:VALue command.

Description

This command specifies the data value to be used in a LIN search if the search condition is set to IDentifier or IDANDDATA (identifier and data). SEARCH is the search number, which is always 1, and B

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:LIN:DATa:VALue? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:LIN:DATa:VALue? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:LIN:DATa:VALue value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:LIN:DATa:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:LIN:DATa:VALue?

Info

<QString> is the binary data string for the search.

SearchSearchItemTriggerABusBItemLinErrtype ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:LIN:ERRTYPE command.

Description

Sets or returns the error type used for a LIN Search.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:LIN:ERRTYPE? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:LIN:ERRTYPE? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:LIN:ERRTYPE value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:LIN:ERRTYPE {SYNC|PARity|CHecksum}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:LIN:ERRTYPE?

Info

SYNC specifies a sync error type.
PARity specifies a parity error type.
CHecksum specifies a checksum error type.

SearchSearchItemTriggerABusBItemLinIdentifier ¶

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:LIN:IDentifier command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:LIN:IDentifier? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:LIN:IDentifier? query and raise an AssertionError if the returned value does not match value.

Properties

.value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:LIN:IDentifier:VALue command.

value `property` ¶

value: SearchSearchItemTriggerABusBItemLinIdentifierValue

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:LIN:IDentifier:VALue command.

Description

This command specifies the binary address string used for LIN search if search condition is set to IDentifier or IDANDDATA (identifier and data). SEARCH is the search number, which is always 1, and B

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:LIN:IDentifier:VALue? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:LIN:IDentifier:VALue? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:LIN:IDentifier:VALue value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:LIN:IDentifier:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:LIN:IDentifier:VALue?

Info

<QString> is a quoted string specifying the binary address string to be used in a LIN search if the search condition is set to IDentifier or IDANDDATA (identifier and data).

SearchSearchItemTriggerABusBItemLinIdentifierValue ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:LIN:IDentifier:VALue command.

Description

This command specifies the binary address string used for LIN search if search condition is set to IDentifier or IDANDDATA (identifier and data). SEARCH is the search number, which is always 1, and B

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:LIN:IDentifier:VALue? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:LIN:IDentifier:VALue? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:LIN:IDentifier:VALue value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:LIN:IDentifier:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:LIN:IDentifier:VALue?

Info

<QString> is a quoted string specifying the binary address string to be used in a LIN search if the search condition is set to IDentifier or IDANDDATA (identifier and data).

SearchSearchItemTriggerABusBItemParallel ¶

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:PARallel command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:PARallel? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:PARallel? query and raise an AssertionError if the returned value does not match value.

Properties

.value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:PARallel:VALue command.

value `property` ¶

value: SearchSearchItemTriggerABusBItemParallelValue

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:PARallel:VALue command.

Description

This command specifies the data value to be used in a Parallel search. SEARCH is the search number and B SEARCH is the search number, which is always 1, and B

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:PARallel:VALue? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:PARallel:VALue? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:PARallel:VALue value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:PARallel:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:PARallel:VALue?

Info

<QString> is the binary data string.

SearchSearchItemTriggerABusBItemParallelValue ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:PARallel:VALue command.

Description

This command specifies the data value to be used in a Parallel search. SEARCH is the search number and B SEARCH is the search number, which is always 1, and B

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:PARallel:VALue? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:PARallel:VALue? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:PARallel:VALue value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:PARallel:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:PARallel:VALue?

Info

<QString> is the binary data string.

SearchSearchItemTriggerABusBItemRs232c ¶

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:RS232C command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:RS232C? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:RS232C? query and raise an AssertionError if the returned value does not match value.

Properties

.condition: The SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:RS232C:CONDition command.
.rx: The SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:RS232C:RX command tree.
.tx: The SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:RS232C:TX command tree.

condition `property` ¶

condition: SearchSearchItemTriggerABusBItemRs232cCondition

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:RS232C:CONDition command.

Description

Sets or returns the condition for a RS232 trigger search. SEARCH is the search number and B is the bus number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:RS232C:CONDition? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:RS232C:CONDition? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:RS232C:CONDition value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:RS232C:CONDition {RXSTArt|RXDATA|RXENDPacket|RXPARity|TXSTArt|TXDATA|TXENDPacket|TXPARity}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:RS232C:CONDition?

Info

RXSTArt specifies a search based on the RX Start Bit.
RXDATA specifies a search based on RX Data.
RXENDPacket specifies a search based on the RX End of Packet condition.
RXPARIty specifies a search based on the RX parity.
TXSTArt specifies a search base on the TX Start Bit.
TXDATA specifies a search based on TX Data.
TXENDPacket specifies a search based on the TX End of Packet condition.
TXPARIty specifies a search based on the TX parity.

rx `property` ¶

rx: SearchSearchItemTriggerABusBItemRs232cRx

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:RS232C:RX command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:RS232C:RX? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:RS232C:RX? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.data: The SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:RS232C:RX:DATa command tree.

tx `property` ¶

tx: SearchSearchItemTriggerABusBItemRs232cTx

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:RS232C:TX command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:RS232C:TX? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:RS232C:TX? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.data: The SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:RS232C:TX:DATa command tree.

SearchSearchItemTriggerABusBItemRs232cCondition ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:RS232C:CONDition command.

Description

Sets or returns the condition for a RS232 trigger search. SEARCH is the search number and B is the bus number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:RS232C:CONDition? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:RS232C:CONDition? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:RS232C:CONDition value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:RS232C:CONDition {RXSTArt|RXDATA|RXENDPacket|RXPARity|TXSTArt|TXDATA|TXENDPacket|TXPARity}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:RS232C:CONDition?

Info

RXSTArt specifies a search based on the RX Start Bit.
RXDATA specifies a search based on RX Data.
RXENDPacket specifies a search based on the RX End of Packet condition.
RXPARIty specifies a search based on the RX parity.
TXSTArt specifies a search base on the TX Start Bit.
TXDATA specifies a search based on TX Data.
TXENDPacket specifies a search based on the TX End of Packet condition.
TXPARIty specifies a search based on the TX parity.

SearchSearchItemTriggerABusBItemRs232cRx ¶

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:RS232C:RX command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:RS232C:RX? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:RS232C:RX? query and raise an AssertionError if the returned value does not match value.

Properties

.data: The SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:RS232C:RX:DATa command tree.

data `property` ¶

data: SearchSearchItemTriggerABusBItemRs232cRxData

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:RS232C:RX:DATa command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:RS232C:RX:DATa? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:RS232C:RX:DATa? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.size: The SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:RS232C:RX:DATa:SIZe command.
.value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:RS232C:RX:DATa:VALue command.

SearchSearchItemTriggerABusBItemRs232cRxData ¶

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:RS232C:RX:DATa command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:RS232C:RX:DATa? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:RS232C:RX:DATa? query and raise an AssertionError if the returned value does not match value.

Properties

.size: The SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:RS232C:RX:DATa:SIZe command.
.value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:RS232C:RX:DATa:VALue command.

size `property` ¶

size: SearchSearchItemTriggerABusBItemRs232cRxDataSize

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:RS232C:RX:DATa:SIZe command.

Description

This command specifies the length of the data string to be used in an RS-232 search, if the search condition is set to RXDATA. SEARCH is the search number, which is always 1, and B

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:RS232C:RX:DATa:SIZe? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:RS232C:RX:DATa:SIZe? query and raise an AssertionError if the returned value does not match value.
Using the .write() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:RS232C:RX:DATa:SIZe command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:RS232C:RX:DATa:SIZe
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:RS232C:RX:DATa:SIZe?

Info

<NR1> is the length of the data string in Bytes.

value `property` ¶

value: SearchSearchItemTriggerABusBItemRs232cRxDataValue

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:RS232C:RX:DATa:VALue command.

Description

This command specifies the data value to be used in an RS-232 search, if the condition is set to RXDATA. SEARCH is the search number, which is always 1, and B

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:RS232C:RX:DATa:VALue? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:RS232C:RX:DATa:VALue? query and raise an AssertionError if the returned value does not match value.
Using the .write() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:RS232C:RX:DATa:VALue command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:RS232C:RX:DATa:VALue
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:RS232C:RX:DATa:VALue?

SearchSearchItemTriggerABusBItemRs232cRxDataSize ¶

Bases: SCPICmdWriteNoArguments, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:RS232C:RX:DATa:SIZe command.

Description

This command specifies the length of the data string to be used in an RS-232 search, if the search condition is set to RXDATA. SEARCH is the search number, which is always 1, and B

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:RS232C:RX:DATa:SIZe? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:RS232C:RX:DATa:SIZe? query and raise an AssertionError if the returned value does not match value.
Using the .write() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:RS232C:RX:DATa:SIZe command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:RS232C:RX:DATa:SIZe
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:RS232C:RX:DATa:SIZe?

Info

<NR1> is the length of the data string in Bytes.

SearchSearchItemTriggerABusBItemRs232cRxDataValue ¶

Bases: SCPICmdWriteNoArguments, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:RS232C:RX:DATa:VALue command.

Description

This command specifies the data value to be used in an RS-232 search, if the condition is set to RXDATA. SEARCH is the search number, which is always 1, and B

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:RS232C:RX:DATa:VALue? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:RS232C:RX:DATa:VALue? query and raise an AssertionError if the returned value does not match value.
Using the .write() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:RS232C:RX:DATa:VALue command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:RS232C:RX:DATa:VALue
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:RS232C:RX:DATa:VALue?

SearchSearchItemTriggerABusBItemRs232cTx ¶

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:RS232C:TX command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:RS232C:TX? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:RS232C:TX? query and raise an AssertionError if the returned value does not match value.

Properties

.data: The SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:RS232C:TX:DATa command tree.

data `property` ¶

data: SearchSearchItemTriggerABusBItemRs232cTxData

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:RS232C:TX:DATa command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:RS232C:TX:DATa? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:RS232C:TX:DATa? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.size: The SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:RS232C:TX:DATa:SIZe command.
.value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:RS232C:TX:DATa:VALue command.

SearchSearchItemTriggerABusBItemRs232cTxData ¶

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:RS232C:TX:DATa command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:RS232C:TX:DATa? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:RS232C:TX:DATa? query and raise an AssertionError if the returned value does not match value.

Properties

.size: The SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:RS232C:TX:DATa:SIZe command.
.value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:RS232C:TX:DATa:VALue command.

size `property` ¶

size: SearchSearchItemTriggerABusBItemRs232cTxDataSize

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:RS232C:TX:DATa:SIZe command.

Description

This command specifies the length of the data string to be used for an RS-232 search if the search condition is set to TXDATA. SEARCH is the search number, which is always 1, and B

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:RS232C:TX:DATa:SIZe? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:RS232C:TX:DATa:SIZe? query and raise an AssertionError if the returned value does not match value.
Using the .write() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:RS232C:TX:DATa:SIZe command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:RS232C:TX:DATa:SIZe
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:RS232C:TX:DATa:SIZe?

Info

<NR1> is the length of the data string in Bytes.

value `property` ¶

value: SearchSearchItemTriggerABusBItemRs232cTxDataValue

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:RS232C:TX:DATa:VALue command.

Description

This command specifies the data value to be used for an RS-232 search, if the condition is set to RXDATA. SEARCH is the search number, which is always 1, and B

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:RS232C:TX:DATa:VALue? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:RS232C:TX:DATa:VALue? query and raise an AssertionError if the returned value does not match value.
Using the .write() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:RS232C:TX:DATa:VALue command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:RS232C:TX:DATa:VALue
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:RS232C:TX:DATa:VALue?

SearchSearchItemTriggerABusBItemRs232cTxDataSize ¶

Bases: SCPICmdWriteNoArguments, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:RS232C:TX:DATa:SIZe command.

Description

This command specifies the length of the data string to be used for an RS-232 search if the search condition is set to TXDATA. SEARCH is the search number, which is always 1, and B

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:RS232C:TX:DATa:SIZe? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:RS232C:TX:DATa:SIZe? query and raise an AssertionError if the returned value does not match value.
Using the .write() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:RS232C:TX:DATa:SIZe command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:RS232C:TX:DATa:SIZe
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:RS232C:TX:DATa:SIZe?

Info

<NR1> is the length of the data string in Bytes.

SearchSearchItemTriggerABusBItemRs232cTxDataValue ¶

Bases: SCPICmdWriteNoArguments, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:RS232C:TX:DATa:VALue command.

Description

This command specifies the data value to be used for an RS-232 search, if the condition is set to RXDATA. SEARCH is the search number, which is always 1, and B

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:RS232C:TX:DATa:VALue? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:RS232C:TX:DATa:VALue? query and raise an AssertionError if the returned value does not match value.
Using the .write() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:RS232C:TX:DATa:VALue command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:RS232C:TX:DATa:VALue
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:RS232C:TX:DATa:VALue?

SearchSearchItemTriggerABusBItemSpi ¶

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:SPI command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:SPI? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:SPI? query and raise an AssertionError if the returned value does not match value.

Properties

.condition: The SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:SPI:CONDition command.
.data: The SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:SPI:DATa command tree.

condition `property` ¶

condition: SearchSearchItemTriggerABusBItemSpiCondition

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:SPI:CONDition command.

Description

Sets or returns the search condition for a SPI trigger search. SEARCH is the search number and B is the bus number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:SPI:CONDition? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:SPI:CONDition? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:SPI:CONDition value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:SPI:CONDition {SS|MISO|MOSI|MISOMOSI}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:SPI:CONDition?

Info

SS specifies a search based on the Slave Selection condition.
MISO specifies a search based on the Master-In Slave-Out condition.
MOSI specifies a search based on the Master-Out Slave-In condition.
MISOMOSI specifies a search based on the Master-In Slave-Out and Master-Out Slave-In conditions.

data `property` ¶

data: SearchSearchItemTriggerABusBItemSpiData

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:SPI:DATa command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:SPI:DATa? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:SPI:DATa? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.size: The SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:SPI:DATa:SIZe command.
.miso: The SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:SPI:DATa:MISO command tree.
.in: The SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:SPI:DATa:IN command tree.
.mosi: The SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:SPI:DATa:MOSI command tree.
.out: The SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:SPI:DATa:OUT command tree.

SearchSearchItemTriggerABusBItemSpiCondition ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:SPI:CONDition command.

Description

Sets or returns the search condition for a SPI trigger search. SEARCH is the search number and B is the bus number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:SPI:CONDition? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:SPI:CONDition? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:SPI:CONDition value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:SPI:CONDition {SS|MISO|MOSI|MISOMOSI}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:SPI:CONDition?

Info

SS specifies a search based on the Slave Selection condition.
MISO specifies a search based on the Master-In Slave-Out condition.
MOSI specifies a search based on the Master-Out Slave-In condition.
MISOMOSI specifies a search based on the Master-In Slave-Out and Master-Out Slave-In conditions.

SearchSearchItemTriggerABusBItemSpiData ¶

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:SPI:DATa command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:SPI:DATa? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:SPI:DATa? query and raise an AssertionError if the returned value does not match value.

Properties

.size: The SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:SPI:DATa:SIZe command.
.miso: The SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:SPI:DATa:MISO command tree.
.in: The SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:SPI:DATa:IN command tree.
.mosi: The SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:SPI:DATa:MOSI command tree.
.out: The SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:SPI:DATa:OUT command tree.

in_ `property` ¶

in_: SearchSearchItemTriggerABusBItemSpiDataIn

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:SPI:DATa:IN command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:SPI:DATa:IN? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:SPI:DATa:IN? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:SPI:DATa:IN:VALue command.

miso `property` ¶

miso: SearchSearchItemTriggerABusBItemSpiDataMiso

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:SPI:DATa:MISO command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:SPI:DATa:MISO? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:SPI:DATa:MISO? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:SPI:DATa:MISO:VALue command.

mosi `property` ¶

mosi: SearchSearchItemTriggerABusBItemSpiDataMosi

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:SPI:DATa:MOSI command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:SPI:DATa:MOSI? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:SPI:DATa:MOSI? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:SPI:DATa:MOSI:VALue command.

out `property` ¶

out: SearchSearchItemTriggerABusBItemSpiDataOut

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:SPI:DATa:OUT command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:SPI:DATa:OUT? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:SPI:DATa:OUT? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:SPI:DATa:OUT:VALue command.

size `property` ¶

size: SearchSearchItemTriggerABusBItemSpiDataSize

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:SPI:DATa:SIZe command.

Description

This command specifies the length of the data string to be used in an SPI search, if the search condition is MISO, MOSI, or MISOMOSI. SEARCH is the search number, which is always 1, and B

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:SPI:DATa:SIZe? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:SPI:DATa:SIZe? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:SPI:DATa:SIZe value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:SPI:DATa:SIZe <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:SPI:DATa:SIZe?

Info

<NR1> is the data string length in bytes.

SearchSearchItemTriggerABusBItemSpiDataIn ¶

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:SPI:DATa:IN command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:SPI:DATa:IN? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:SPI:DATa:IN? query and raise an AssertionError if the returned value does not match value.

Properties

.value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:SPI:DATa:IN:VALue command.

value `property` ¶

value: SearchSearchItemTriggerABusBItemSpiDataInValue

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:SPI:DATa:IN:VALue command.

Description

This command specifies the data in value to be used in an SPI search, if the search condition is set to MISO or MISOMOSI. SEARCH is the search number, which is always 1, and B

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:SPI:DATa:IN:VALue? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:SPI:DATa:IN:VALue? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:SPI:DATa:IN:VALue value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:SPI:DATa:IN:VALue <bin>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:SPI:DATa:IN:VALue?

Info

<bin> is the data string in binary format.

SearchSearchItemTriggerABusBItemSpiDataInValue ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:SPI:DATa:IN:VALue command.

Description

This command specifies the data in value to be used in an SPI search, if the search condition is set to MISO or MISOMOSI. SEARCH is the search number, which is always 1, and B

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:SPI:DATa:IN:VALue? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:SPI:DATa:IN:VALue? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:SPI:DATa:IN:VALue value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:SPI:DATa:IN:VALue <bin>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:SPI:DATa:IN:VALue?

Info

<bin> is the data string in binary format.

SearchSearchItemTriggerABusBItemSpiDataMiso ¶

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:SPI:DATa:MISO command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:SPI:DATa:MISO? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:SPI:DATa:MISO? query and raise an AssertionError if the returned value does not match value.

Properties

.value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:SPI:DATa:MISO:VALue command.

value `property` ¶

value: SearchSearchItemTriggerABusBItemSpiDataMisoValue

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:SPI:DATa:MISO:VALue command.

Description

This command specifies the data in value to be used in an SPI search, if the search condition is set to MISO or MISOMOSI. SEARCH is the search number, which is always 1, and B

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:SPI:DATa:MISO:VALue? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:SPI:DATa:MISO:VALue? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:SPI:DATa:MISO:VALue value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:SPI:DATa:MISO:VALue <bin>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:SPI:DATa:MISO:VALue?

Info

<bin> is the data string in binary format.

SearchSearchItemTriggerABusBItemSpiDataMisoValue ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:SPI:DATa:MISO:VALue command.

Description

This command specifies the data in value to be used in an SPI search, if the search condition is set to MISO or MISOMOSI. SEARCH is the search number, which is always 1, and B

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:SPI:DATa:MISO:VALue? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:SPI:DATa:MISO:VALue? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:SPI:DATa:MISO:VALue value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:SPI:DATa:MISO:VALue <bin>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:SPI:DATa:MISO:VALue?

Info

<bin> is the data string in binary format.

SearchSearchItemTriggerABusBItemSpiDataMosi ¶

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:SPI:DATa:MOSI command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:SPI:DATa:MOSI? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:SPI:DATa:MOSI? query and raise an AssertionError if the returned value does not match value.

Properties

.value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:SPI:DATa:MOSI:VALue command.

value `property` ¶

value: SearchSearchItemTriggerABusBItemSpiDataMosiValue

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:SPI:DATa:MOSI:VALue command.

Description

This command specifies the data out value to be used in an SPI search if the search the condition is set to MOSI, or MISOMOSI. SEARCH is the search number, which is always 1, and B

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:SPI:DATa:MOSI:VALue? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:SPI:DATa:MOSI:VALue? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:SPI:DATa:MOSI:VALue value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:SPI:DATa:MOSI:VALue <bin>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:SPI:DATa:MOSI:VALue?

Info

<bin> is the data in binary format.

SearchSearchItemTriggerABusBItemSpiDataMosiValue ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:SPI:DATa:MOSI:VALue command.

Description

This command specifies the data out value to be used in an SPI search if the search the condition is set to MOSI, or MISOMOSI. SEARCH is the search number, which is always 1, and B

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:SPI:DATa:MOSI:VALue? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:SPI:DATa:MOSI:VALue? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:SPI:DATa:MOSI:VALue value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:SPI:DATa:MOSI:VALue <bin>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:SPI:DATa:MOSI:VALue?

Info

<bin> is the data in binary format.

SearchSearchItemTriggerABusBItemSpiDataOut ¶

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:SPI:DATa:OUT command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:SPI:DATa:OUT? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:SPI:DATa:OUT? query and raise an AssertionError if the returned value does not match value.

Properties

.value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:SPI:DATa:OUT:VALue command.

value `property` ¶

value: SearchSearchItemTriggerABusBItemSpiDataOutValue

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:SPI:DATa:OUT:VALue command.

Description

This command specifies the data out value to be used in an SPI search if the search the condition is set to MOSI, or MISOMOSI. SEARCH is the search number, which is always 1, and B

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:SPI:DATa:OUT:VALue? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:SPI:DATa:OUT:VALue? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:SPI:DATa:OUT:VALue value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:SPI:DATa:OUT:VALue <bin>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:SPI:DATa:OUT:VALue?

Info

<bin> is the data in binary format.

SearchSearchItemTriggerABusBItemSpiDataOutValue ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:SPI:DATa:OUT:VALue command.

Description

This command specifies the data out value to be used in an SPI search if the search the condition is set to MOSI, or MISOMOSI. SEARCH is the search number, which is always 1, and B

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:SPI:DATa:OUT:VALue? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:SPI:DATa:OUT:VALue? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:SPI:DATa:OUT:VALue value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:SPI:DATa:OUT:VALue <bin>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:SPI:DATa:OUT:VALue?

Info

<bin> is the data in binary format.

SearchSearchItemTriggerABusBItemSpiDataSize ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:SPI:DATa:SIZe command.

Description

This command specifies the length of the data string to be used in an SPI search, if the search condition is MISO, MOSI, or MISOMOSI. SEARCH is the search number, which is always 1, and B

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:SPI:DATa:SIZe? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:SPI:DATa:SIZe? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:SPI:DATa:SIZe value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:SPI:DATa:SIZe <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:SPI:DATa:SIZe?

Info

<NR1> is the data string length in bytes.

SearchSearchItemTriggerABusSource ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:SOUrce command.

Description

This command specifies the source of a bus search. is the search number. SEARCH is the search number, which is always 1.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SOUrce? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SOUrce? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SOUrce value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:SOUrce {B<x>}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SOUrce?

Info

B1 specifies the Bus 1 source.
B2 specifies the Bus 2 source.
B3 specifies the Bus 3 source.
B4 specifies the Bus 4 source.

SearchSearchItemTriggerAEdge ¶

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:EDGE command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:EDGE? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:EDGE? query and raise an AssertionError if the returned value does not match value.

Properties

.slope: The SEARCH:SEARCH<x>:TRIGger:A:EDGE:SLOpe command.
.source: The SEARCH:SEARCH<x>:TRIGger:A:EDGE:SOUrce command.

slope `property` ¶

slope: SearchSearchItemTriggerAEdgeSlope

Return the SEARCH:SEARCH<x>:TRIGger:A:EDGE:SLOpe command.

Description

Sets or returns the slope for an edge trigger search to determine where to place a mark. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:EDGE:SLOpe? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:EDGE:SLOpe? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:EDGE:SLOpe value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:EDGE:SLOpe {RISe|FALL}
- SEARCH:SEARCH<x>:TRIGger:A:EDGE:SLOpe?

Info

RISe specifies a rising edge.
FALL specifies a falling edge.

source `property` ¶

source: SearchSearchItemTriggerAEdgeSource

Return the SEARCH:SEARCH<x>:TRIGger:A:EDGE:SOUrce command.

Description

Sets or returns the source waveform for an edge trigger search to determine where to place a mark. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:EDGE:SOUrce? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:EDGE:SOUrce? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:EDGE:SOUrce value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:EDGE:SOUrce {CH<x>|MATH}
- SEARCH:SEARCH<x>:TRIGger:A:EDGE:SOUrce?

Info

CH<x> specifies one input channel as the edge source, where is the channel number.
MATH specifies the math waveform as the search source.

SearchSearchItemTriggerAEdgeSlope ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:EDGE:SLOpe command.

Description

Sets or returns the slope for an edge trigger search to determine where to place a mark. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:EDGE:SLOpe? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:EDGE:SLOpe? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:EDGE:SLOpe value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:EDGE:SLOpe {RISe|FALL}
- SEARCH:SEARCH<x>:TRIGger:A:EDGE:SLOpe?

Info

RISe specifies a rising edge.
FALL specifies a falling edge.

SearchSearchItemTriggerAEdgeSource ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:EDGE:SOUrce command.

Description

Sets or returns the source waveform for an edge trigger search to determine where to place a mark. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:EDGE:SOUrce? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:EDGE:SOUrce? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:EDGE:SOUrce value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:EDGE:SOUrce {CH<x>|MATH}
- SEARCH:SEARCH<x>:TRIGger:A:EDGE:SOUrce?

Info

CH<x> specifies one input channel as the edge source, where is the channel number.
MATH specifies the math waveform as the search source.

SearchSearchItemTriggerALevel ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:LEVel command.

Description

Sets or returns the level for an edge trigger search to determine where to place a mark. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:LEVel? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LEVel? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LEVel value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:LEVel {<NR3>|TTL|ECL}
- SEARCH:SEARCH<x>:TRIGger:A:LEVel?

Info

<NR3> specifies the trigger level, in volts.
TTL specifies a preset TTL high level of 1.4 V.
ECL specifies a preset ECL high level of -1.3 V.

Properties

.ch: The SEARCH:SEARCH<x>:TRIGger:A:LEVel:CH<x> command.
.math: The SEARCH:SEARCH<x>:TRIGger:A:LEVel:MATH command.
.ref: The SEARCH:SEARCH<x>:TRIGger:A:LEVel:REF<x> command.

ch `property` ¶

ch: dict[int, SearchSearchItemTriggerALevelChannel]

Return the SEARCH:SEARCH<x>:TRIGger:A:LEVel:CH<x> command.

Description

Sets or returns the level for an edge trigger search to determine where to place a mark. SEARCH is the search number and CH is the channel number. Each channel can have an independent level.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:LEVel:CH<x>? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LEVel:CH<x>? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LEVel:CH<x> value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:LEVel:CH<x> {<NR3>|TTL|ECL}
- SEARCH:SEARCH<x>:TRIGger:A:LEVel:CH<x>?

Info

<NR3> specifies the trigger level in volts.
TTL specifies a preset TTL high level of 1.4 V.
ECL specifies a preset ECL high level of -1.3 V.

math `property` ¶

math: SearchSearchItemTriggerALevelMath

Return the SEARCH:SEARCH<x>:TRIGger:A:LEVel:MATH command.

Description

[1] Sets or returns the math waveform level for an edge trigger search to determine where to place a mark. is the search number. The value of MATH is 1 for all oscilloscopes.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:LEVel:MATH? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LEVel:MATH? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LEVel:MATH value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:LEVel:MATH {TTL|ECL}
- SEARCH:SEARCH<x>:TRIGger:A:LEVel:MATH?

Info

TTL specifies a preset TTL high level of 1.4 V.
ECL specifies a preset ECL high level of -1.3 V.

ref `property` ¶

ref: dict[int, SearchSearchItemTriggerALevelRefItem]

Return the SEARCH:SEARCH<x>:TRIGger:A:LEVel:REF<x> command.

Description

Sets or returns the specified reference waveform level for an edge trigger search to determine where to place a mark. SEARCH is the search number and REF is the reference channel number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:LEVel:REF<x>? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LEVel:REF<x>? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LEVel:REF<x> value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:LEVel:REF<x> {TTL|ECL}
- SEARCH:SEARCH<x>:TRIGger:A:LEVel:REF<x>?

Info

TTL specifies a preset TTL high level of 1.4 V.
ECL specifies a preset ECL high level of -1.3 V.

SearchSearchItemTriggerALevelChannel ¶

Bases: ValidatedChannel, SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:LEVel:CH<x> command.

Description

Sets or returns the level for an edge trigger search to determine where to place a mark. SEARCH is the search number and CH is the channel number. Each channel can have an independent level.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:LEVel:CH<x>? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LEVel:CH<x>? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LEVel:CH<x> value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:LEVel:CH<x> {<NR3>|TTL|ECL}
- SEARCH:SEARCH<x>:TRIGger:A:LEVel:CH<x>?

Info

<NR3> specifies the trigger level in volts.
TTL specifies a preset TTL high level of 1.4 V.
ECL specifies a preset ECL high level of -1.3 V.

SearchSearchItemTriggerALevelMath ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:LEVel:MATH command.

Description

[1] Sets or returns the math waveform level for an edge trigger search to determine where to place a mark. is the search number. The value of MATH is 1 for all oscilloscopes.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:LEVel:MATH? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LEVel:MATH? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LEVel:MATH value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:LEVel:MATH {TTL|ECL}
- SEARCH:SEARCH<x>:TRIGger:A:LEVel:MATH?

Info

TTL specifies a preset TTL high level of 1.4 V.
ECL specifies a preset ECL high level of -1.3 V.

SearchSearchItemTriggerALevelRefItem ¶

Bases: ValidatedDynamicNumberCmd, SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:LEVel:REF<x> command.

Description

Sets or returns the specified reference waveform level for an edge trigger search to determine where to place a mark. SEARCH is the search number and REF is the reference channel number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:LEVel:REF<x>? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LEVel:REF<x>? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LEVel:REF<x> value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:LEVel:REF<x> {TTL|ECL}
- SEARCH:SEARCH<x>:TRIGger:A:LEVel:REF<x>?

Info

TTL specifies a preset TTL high level of 1.4 V.
ECL specifies a preset ECL high level of -1.3 V.

SearchSearchItemTriggerALogic ¶

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:LOGIc command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc? query and raise an AssertionError if the returned value does not match value.

Properties

.function: The SEARCH:SEARCH<x>:TRIGger:A:LOGIc:FUNCtion command.
.input: The SEARCH:SEARCH<x>:TRIGger:A:LOGIc:INPut command tree.
.pattern: The SEARCH:SEARCH<x>:TRIGger:A:LOGIc:PATtern command tree.
.threshold: The SEARCH:SEARCH<x>:TRIGger:A:LOGIc:THReshold command tree.

function `property` ¶

function: SearchSearchItemTriggerALogicFunction

Return the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:FUNCtion command.

Description

Sets or returns the logic operator for a logic trigger search to determine where to place a mark. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:FUNCtion? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:FUNCtion? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:FUNCtion value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:FUNCtion {AND|NANd}
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:FUNCtion?

Info

AND places a mark if all conditions are true.
NANd places a mark if any of the conditions is false.

input `property` ¶

input: SearchSearchItemTriggerALogicInput

Return the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:INPut command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:INPut? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:INPut? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.ch: The SEARCH:SEARCH<x>:TRIGger:A:LOGIc:INPut:CH<x> command.
.clock: The SEARCH:SEARCH<x>:TRIGger:A:LOGIc:INPut:CLOCk command tree.
.d: The SEARCH:SEARCH<x>:TRIGger:A:LOGIc:INPut:D<x> command.
.math: The SEARCH:SEARCH<x>:TRIGger:A:LOGIc:INPut:MATH command.
.ref: The SEARCH:SEARCH<x>:TRIGger:A:LOGIc:INPut:REF<x> command.

pattern `property` ¶

pattern: SearchSearchItemTriggerALogicPattern

Return the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:PATtern command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:PATtern? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:PATtern? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.input: The SEARCH:SEARCH<x>:TRIGger:A:LOGIc:PATtern:INPut command tree.
.when: The SEARCH:SEARCH<x>:TRIGger:A:LOGIc:PATtern:WHEn command.

threshold `property` ¶

threshold: SearchSearchItemTriggerALogicThreshold

Return the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:THReshold command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:THReshold? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:THReshold? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.ch: The SEARCH:SEARCH<x>:TRIGger:A:LOGIc:THReshold:CH<x> command.
.math: The SEARCH:SEARCH<x>:TRIGger:A:LOGIc:THReshold:MATH command.
.ref: The SEARCH:SEARCH<x>:TRIGger:A:LOGIc:THReshold:REF<x> command.

SearchSearchItemTriggerALogicFunction ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:LOGIc:FUNCtion command.

Description

Sets or returns the logic operator for a logic trigger search to determine where to place a mark. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:FUNCtion? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:FUNCtion? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:FUNCtion value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:FUNCtion {AND|NANd}
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:FUNCtion?

Info

AND places a mark if all conditions are true.
NANd places a mark if any of the conditions is false.

SearchSearchItemTriggerALogicInput ¶

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:LOGIc:INPut command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:INPut? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:INPut? query and raise an AssertionError if the returned value does not match value.

Properties

.ch: The SEARCH:SEARCH<x>:TRIGger:A:LOGIc:INPut:CH<x> command.
.clock: The SEARCH:SEARCH<x>:TRIGger:A:LOGIc:INPut:CLOCk command tree.
.d: The SEARCH:SEARCH<x>:TRIGger:A:LOGIc:INPut:D<x> command.
.math: The SEARCH:SEARCH<x>:TRIGger:A:LOGIc:INPut:MATH command.
.ref: The SEARCH:SEARCH<x>:TRIGger:A:LOGIc:INPut:REF<x> command.

ch `property` ¶

ch: dict[int, SearchSearchItemTriggerALogicInputChannel]

Return the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:INPut:CH<x> command.

Description

This command specifies the logic condition to be used in a logic search when the input is an analog channel. SEARCH is the search number, which is always 1, and CH is the channel number, which can be 1-4.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:INPut:CH<x>? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:INPut:CH<x>? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:INPut:CH<x> value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:INPut:CH<x> {HIGH|LOW|X}
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:INPut:CH<x>?

Info

HIGH specifies the logic high.
LOW specifies the logic low.
X specifies a ‘don’t care’ state.

clock `property` ¶

clock: SearchSearchItemTriggerALogicInputClock

Return the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:INPut:CLOCk command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:INPut:CLOCk? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:INPut:CLOCk? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.edge: The SEARCH:SEARCH<x>:TRIGger:A:LOGIc:INPut:CLOCk:EDGE command.
.source: The SEARCH:SEARCH<x>:TRIGger:A:LOGIc:INPut:CLOCk:SOUrce command.

d `property` ¶

d: dict[int, SearchSearchItemTriggerALogicInputDigitalBit]

Return the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:INPut:D<x> command.

Description

This command specifies the logic condition to be used in a logic search when the input is a digital channel. SEARCH is the search number, which is always 1, and D is the digital channel number, which can be D0 - D16.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:INPut:D<x>? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:INPut:D<x>? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:INPut:D<x> value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:INPut:D<x> {HIGH|LOW|X}
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:INPut:D<x>?

Info

HIGH specifies a high logic level.
LOW specifies a low logic level.
X specifies a ‘don’t care’ condition.

math `property` ¶

math: SearchSearchItemTriggerALogicInputMath

Return the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:INPut:MATH command.

Description

This command specifies the logic condition of the math input to be used in a logic search. is the search number, which is always 1.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:INPut:MATH? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:INPut:MATH? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:INPut:MATH value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:INPut:MATH {HIGH|LOW|X}
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:INPut:MATH?

Info

HIGH specifies a high logic level.
LOW specifies a low logic level.
X specifies a ‘don’t care’ condition.

ref `property` ¶

ref: dict[int, SearchSearchItemTriggerALogicInputRefItem]

Return the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:INPut:REF<x> command.

Description

This command specifies the logic condition of the reference waveform to be used in a logic search. SEARCH is the search number, which is always 1, and REF is the reference channel number, which can be 1-4.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:INPut:REF<x>? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:INPut:REF<x>? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:INPut:REF<x> value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:INPut:REF<x> {HIGH|LOW|X}
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:INPut:REF<x>?

Info

HIGH specifies a high logic level.
LOW specifies a low logic level.
X specifies a ‘don’t care’ condition.

SearchSearchItemTriggerALogicInputChannel ¶

Bases: ValidatedChannel, SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:LOGIc:INPut:CH<x> command.

Description

This command specifies the logic condition to be used in a logic search when the input is an analog channel. SEARCH is the search number, which is always 1, and CH is the channel number, which can be 1-4.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:INPut:CH<x>? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:INPut:CH<x>? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:INPut:CH<x> value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:INPut:CH<x> {HIGH|LOW|X}
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:INPut:CH<x>?

Info

HIGH specifies the logic high.
LOW specifies the logic low.
X specifies a ‘don’t care’ state.

SearchSearchItemTriggerALogicInputClock ¶

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:LOGIc:INPut:CLOCk command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:INPut:CLOCk? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:INPut:CLOCk? query and raise an AssertionError if the returned value does not match value.

Properties

.edge: The SEARCH:SEARCH<x>:TRIGger:A:LOGIc:INPut:CLOCk:EDGE command.
.source: The SEARCH:SEARCH<x>:TRIGger:A:LOGIc:INPut:CLOCk:SOUrce command.

edge `property` ¶

edge: SearchSearchItemTriggerALogicInputClockEdge

Return the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:INPut:CLOCk:EDGE command.

Description

Sets or returns whether the clock edge is a rising or falling for a logic search to determine where to place a mark. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:INPut:CLOCk:EDGE? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:INPut:CLOCk:EDGE? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:INPut:CLOCk:EDGE value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:INPut:CLOCk:EDGE {FALL|RISe|EITher}
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:INPut:CLOCk:EDGE?

Info

RISe specifies a rising edge.
FALL specifies a falling edge.
EITher specifies either a falling or rising edge.

source `property` ¶

source: SearchSearchItemTriggerALogicInputClockSource

Return the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:INPut:CLOCk:SOUrce command.

Description

Sets or returns the clock source definition for a logic trigger search. is the search number. If a clock source is defined, then the logic search is determined by the state of the other inputs at the clock transition. If no clock source is defined, then the logic search is determined only by the state of the inputs.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:INPut:CLOCk:SOUrce? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:INPut:CLOCk:SOUrce? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:INPut:CLOCk:SOUrce value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:INPut:CLOCk:SOUrce {CH<x>|MATH|REF|D<x>|NONe}
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:INPut:CLOCk:SOUrce?

Info

CH<x> specifies a channel input as the clock source, where = 1, 2, 3, or 4.
MATH specifies the math waveform as the clock source.
REF specifies the reference waveform as the clock source.
D<x> specifies the digital waveform as the clock source, where =0-15.
NONe specifies no clock source.

SearchSearchItemTriggerALogicInputClockEdge ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:LOGIc:INPut:CLOCk:EDGE command.

Description

Sets or returns whether the clock edge is a rising or falling for a logic search to determine where to place a mark. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:INPut:CLOCk:EDGE? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:INPut:CLOCk:EDGE? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:INPut:CLOCk:EDGE value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:INPut:CLOCk:EDGE {FALL|RISe|EITher}
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:INPut:CLOCk:EDGE?

Info

RISe specifies a rising edge.
FALL specifies a falling edge.
EITher specifies either a falling or rising edge.

SearchSearchItemTriggerALogicInputClockSource ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:LOGIc:INPut:CLOCk:SOUrce command.

Description

Sets or returns the clock source definition for a logic trigger search. is the search number. If a clock source is defined, then the logic search is determined by the state of the other inputs at the clock transition. If no clock source is defined, then the logic search is determined only by the state of the inputs.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:INPut:CLOCk:SOUrce? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:INPut:CLOCk:SOUrce? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:INPut:CLOCk:SOUrce value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:INPut:CLOCk:SOUrce {CH<x>|MATH|REF|D<x>|NONe}
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:INPut:CLOCk:SOUrce?

Info

CH<x> specifies a channel input as the clock source, where = 1, 2, 3, or 4.
MATH specifies the math waveform as the clock source.
REF specifies the reference waveform as the clock source.
D<x> specifies the digital waveform as the clock source, where =0-15.
NONe specifies no clock source.

SearchSearchItemTriggerALogicInputDigitalBit ¶

Bases: ValidatedDigitalBit, SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:LOGIc:INPut:D<x> command.

Description

This command specifies the logic condition to be used in a logic search when the input is a digital channel. SEARCH is the search number, which is always 1, and D is the digital channel number, which can be D0 - D16.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:INPut:D<x>? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:INPut:D<x>? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:INPut:D<x> value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:INPut:D<x> {HIGH|LOW|X}
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:INPut:D<x>?

Info

HIGH specifies a high logic level.
LOW specifies a low logic level.
X specifies a ‘don’t care’ condition.

SearchSearchItemTriggerALogicInputMath ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:LOGIc:INPut:MATH command.

Description

This command specifies the logic condition of the math input to be used in a logic search. is the search number, which is always 1.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:INPut:MATH? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:INPut:MATH? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:INPut:MATH value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:INPut:MATH {HIGH|LOW|X}
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:INPut:MATH?

Info

HIGH specifies a high logic level.
LOW specifies a low logic level.
X specifies a ‘don’t care’ condition.

SearchSearchItemTriggerALogicInputRefItem ¶

Bases: ValidatedDynamicNumberCmd, SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:LOGIc:INPut:REF<x> command.

Description

This command specifies the logic condition of the reference waveform to be used in a logic search. SEARCH is the search number, which is always 1, and REF is the reference channel number, which can be 1-4.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:INPut:REF<x>? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:INPut:REF<x>? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:INPut:REF<x> value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:INPut:REF<x> {HIGH|LOW|X}
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:INPut:REF<x>?

Info

HIGH specifies a high logic level.
LOW specifies a low logic level.
X specifies a ‘don’t care’ condition.

SearchSearchItemTriggerALogicPattern ¶

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:LOGIc:PATtern command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:PATtern? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:PATtern? query and raise an AssertionError if the returned value does not match value.

Properties

.input: The SEARCH:SEARCH<x>:TRIGger:A:LOGIc:PATtern:INPut command tree.
.when: The SEARCH:SEARCH<x>:TRIGger:A:LOGIc:PATtern:WHEn command.

input `property` ¶

input: SearchSearchItemTriggerALogicPatternInput

Return the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:PATtern:INPut command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:PATtern:INPut? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:PATtern:INPut? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.ch: The SEARCH:SEARCH<x>:TRIGger:A:LOGIc:PATtern:INPut:CH<x> command.
.d: The SEARCH:SEARCH<x>:TRIGger:A:LOGIc:PATtern:INPut:D<x> command.
.math: The SEARCH:SEARCH<x>:TRIGger:A:LOGIc:PATtern:INPut:MATH command.
.ref: The SEARCH:SEARCH<x>:TRIGger:A:LOGIc:PATtern:INPut:REF<x> command.

when `property` ¶

when: SearchSearchItemTriggerALogicPatternWhen

Return the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:PATtern:WHEn command.

Description

Sets or returns the condition for generating a logic pattern trigger search to determine where to place a mark. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:PATtern:WHEn? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:PATtern:WHEn? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:PATtern:WHEn value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:PATtern:WHEn {TRUe|FALSe|LESSThan|MOREThan|Than|EQUal|UNEQual}
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:PATtern:WHEn?

Info

TRUe places a mark when the pattern becomes true.
FALSe places a mark when the pattern becomes false.
LESSThan places a mark if the specific pattern is true less than the time set by the SEARCH:SEARCHX:TRIGGER:A:LOGIC:PATTERN:WHEN:LESSLIMIT command.
MOREThan places a mark if the specific pattern is true more than the time set by the SEARCH:SEARCHX:TRIGGER:A:LOGIC:PATTERN:WHEN:LESSLIMIT command.
EQUal places a mark if the specific pattern is true longer than the time set by the SEARCH:SEARCHX:TRIGGER:A:LOGIC:PATTERN:WHEN:LESSLIMIT command, but less than the specified time set by the SEARCH:SEARCHX:TRIGGER:A:LOGIC:PATTERN:WHEN:MORELIMIT command.
UNEQual places a mark if the specific pattern is true less than the time set by the SEARCH:SEARCHX:TRIGGER:A:LOGIC:PATTERN:WHEN:LESSLIMIT command, or longer than the specified time set by the SEARCH:SEARCHX:TRIGGER:A:LOGIC:PATTERN:WHEN:MORELIMIT command.

Sub-properties

.lesslimit: The SEARCH:SEARCH<x>:TRIGger:A:LOGIc:PATtern:WHEn:LESSLimit command.
.morelimit: The SEARCH:SEARCH<x>:TRIGger:A:LOGIc:PATtern:WHEn:MORELimit command.

SearchSearchItemTriggerALogicPatternInput ¶

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:LOGIc:PATtern:INPut command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:PATtern:INPut? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:PATtern:INPut? query and raise an AssertionError if the returned value does not match value.

Properties

.ch: The SEARCH:SEARCH<x>:TRIGger:A:LOGIc:PATtern:INPut:CH<x> command.
.d: The SEARCH:SEARCH<x>:TRIGger:A:LOGIc:PATtern:INPut:D<x> command.
.math: The SEARCH:SEARCH<x>:TRIGger:A:LOGIc:PATtern:INPut:MATH command.
.ref: The SEARCH:SEARCH<x>:TRIGger:A:LOGIc:PATtern:INPut:REF<x> command.

ch `property` ¶

ch: dict[int, SearchSearchItemTriggerALogicPatternInputChannel]

Return the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:PATtern:INPut:CH<x> command.

Description

This command specifies the logic condition to be used in a logic search when the input is an analog channel. SEARCH is the search number, which is always 1, and CH is the analog channel number, which can be 1- 4.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:PATtern:INPut:CH<x>? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:PATtern:INPut:CH<x>? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:PATtern:INPut:CH<x> value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:PATtern:INPut:CH<x> {HIGH|LOW|X}
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:PATtern:INPut:CH<x>?

Info

HIGH specifies a high logic level.
LOW specifies a low logic level.
X specifies a ‘don’t care’ condition.

d `property` ¶

d: dict[int, SearchSearchItemTriggerALogicPatternInputDigitalBit]

Return the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:PATtern:INPut:D<x> command.

Description

Sets or returns the logic criteria for a logic pattern search to determine where to place a mark. SEARCH is the search number and D is the digital channel number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:PATtern:INPut:D<x>? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:PATtern:INPut:D<x>? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:PATtern:INPut:D<x> value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:PATtern:INPut:D<x> {HIGH|LOW|X}
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:PATtern:INPut:D<x>?

Info

HIGH specifies a high logic level.
LOW specifies a low logic level.
X specifies a ‘don’t care’ condition.

math `property` ¶

math: SearchSearchItemTriggerALogicPatternInputMath

Return the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:PATtern:INPut:MATH command.

Description

Sets or returns the Boolean logic criteria for a logic pattern trigger search to determine where to place a mark. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:PATtern:INPut:MATH? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:PATtern:INPut:MATH? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:PATtern:INPut:MATH value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:PATtern:INPut:MATH {HIGH|LOW|X}
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:PATtern:INPut:MATH?

Info

HIGH specifies a high logic level.
LOW specifies a low logic level.
X specifies a ‘don’t care’ condition.

ref `property` ¶

ref: dict[int, SearchSearchItemTriggerALogicPatternInputRefItem]

Return the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:PATtern:INPut:REF<x> command.

Description

Sets or returns the Boolean logic criteria for a pattern trigger search to determine where to place a mark. SEARCH is the search number and REF is the reference channel number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:PATtern:INPut:REF<x>? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:PATtern:INPut:REF<x>? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:PATtern:INPut:REF<x> value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:PATtern:INPut:REF<x> {HIGH|LOW|X}
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:PATtern:INPut:REF<x>?

Info

HIGH specifies a high logic level.
LOW specifies a low logic level.
X specifies a ‘don’t care’ condition.

SearchSearchItemTriggerALogicPatternInputChannel ¶

Bases: ValidatedChannel, SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:LOGIc:PATtern:INPut:CH<x> command.

Description

This command specifies the logic condition to be used in a logic search when the input is an analog channel. SEARCH is the search number, which is always 1, and CH is the analog channel number, which can be 1- 4.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:PATtern:INPut:CH<x>? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:PATtern:INPut:CH<x>? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:PATtern:INPut:CH<x> value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:PATtern:INPut:CH<x> {HIGH|LOW|X}
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:PATtern:INPut:CH<x>?

Info

HIGH specifies a high logic level.
LOW specifies a low logic level.
X specifies a ‘don’t care’ condition.

SearchSearchItemTriggerALogicPatternInputDigitalBit ¶

Bases: ValidatedDigitalBit, SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:LOGIc:PATtern:INPut:D<x> command.

Description

Sets or returns the logic criteria for a logic pattern search to determine where to place a mark. SEARCH is the search number and D is the digital channel number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:PATtern:INPut:D<x>? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:PATtern:INPut:D<x>? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:PATtern:INPut:D<x> value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:PATtern:INPut:D<x> {HIGH|LOW|X}
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:PATtern:INPut:D<x>?

Info

HIGH specifies a high logic level.
LOW specifies a low logic level.
X specifies a ‘don’t care’ condition.

SearchSearchItemTriggerALogicPatternInputMath ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:LOGIc:PATtern:INPut:MATH command.

Description

Sets or returns the Boolean logic criteria for a logic pattern trigger search to determine where to place a mark. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:PATtern:INPut:MATH? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:PATtern:INPut:MATH? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:PATtern:INPut:MATH value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:PATtern:INPut:MATH {HIGH|LOW|X}
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:PATtern:INPut:MATH?

Info

HIGH specifies a high logic level.
LOW specifies a low logic level.
X specifies a ‘don’t care’ condition.

SearchSearchItemTriggerALogicPatternInputRefItem ¶

Bases: ValidatedDynamicNumberCmd, SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:LOGIc:PATtern:INPut:REF<x> command.

Description

Sets or returns the Boolean logic criteria for a pattern trigger search to determine where to place a mark. SEARCH is the search number and REF is the reference channel number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:PATtern:INPut:REF<x>? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:PATtern:INPut:REF<x>? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:PATtern:INPut:REF<x> value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:PATtern:INPut:REF<x> {HIGH|LOW|X}
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:PATtern:INPut:REF<x>?

Info

HIGH specifies a high logic level.
LOW specifies a low logic level.
X specifies a ‘don’t care’ condition.

SearchSearchItemTriggerALogicPatternWhen ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:LOGIc:PATtern:WHEn command.

Description

Sets or returns the condition for generating a logic pattern trigger search to determine where to place a mark. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:PATtern:WHEn? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:PATtern:WHEn? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:PATtern:WHEn value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:PATtern:WHEn {TRUe|FALSe|LESSThan|MOREThan|Than|EQUal|UNEQual}
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:PATtern:WHEn?

Info

TRUe places a mark when the pattern becomes true.
FALSe places a mark when the pattern becomes false.
LESSThan places a mark if the specific pattern is true less than the time set by the SEARCH:SEARCHX:TRIGGER:A:LOGIC:PATTERN:WHEN:LESSLIMIT command.
MOREThan places a mark if the specific pattern is true more than the time set by the SEARCH:SEARCHX:TRIGGER:A:LOGIC:PATTERN:WHEN:LESSLIMIT command.
EQUal places a mark if the specific pattern is true longer than the time set by the SEARCH:SEARCHX:TRIGGER:A:LOGIC:PATTERN:WHEN:LESSLIMIT command, but less than the specified time set by the SEARCH:SEARCHX:TRIGGER:A:LOGIC:PATTERN:WHEN:MORELIMIT command.
UNEQual places a mark if the specific pattern is true less than the time set by the SEARCH:SEARCHX:TRIGGER:A:LOGIC:PATTERN:WHEN:LESSLIMIT command, or longer than the specified time set by the SEARCH:SEARCHX:TRIGGER:A:LOGIC:PATTERN:WHEN:MORELIMIT command.

Properties

.lesslimit: The SEARCH:SEARCH<x>:TRIGger:A:LOGIc:PATtern:WHEn:LESSLimit command.
.morelimit: The SEARCH:SEARCH<x>:TRIGger:A:LOGIc:PATtern:WHEn:MORELimit command.

lesslimit `property` ¶

lesslimit: SearchSearchItemTriggerALogicPatternWhenLesslimit

Return the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:PATtern:WHEn:LESSLimit command.

Description

This command specifies the maximum time that the selected pattern may be true and still generate an A logic pattern search to place a mark. is the search number, which is always 1

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:PATtern:WHEn:LESSLimit? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:PATtern:WHEn:LESSLimit? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:PATtern:WHEn:LESSLimit value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:PATtern:WHEn:LESSLimit <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:PATtern:WHEn:LESSLimit?

Info

<NR3> is a floating point number that specifies the maximum amount of time to hold the pattern true.

morelimit `property` ¶

morelimit: SearchSearchItemTriggerALogicPatternWhenMorelimit

Return the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:PATtern:WHEn:MORELimit command.

Description

This command specifies the minimum time that the selected pattern may be true and still generate an A logic pattern search to place a mark. SEARCH is the search number, which is always 1.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:PATtern:WHEn:MORELimit? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:PATtern:WHEn:MORELimit? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:PATtern:WHEn:MORELimit value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:PATtern:WHEn:MORELimit <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:PATtern:WHEn:MORELimit?

Info

<NR3> is a floating point number that specifies the minimum amount of time to hold the pattern true.

SearchSearchItemTriggerALogicPatternWhenLesslimit ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:LOGIc:PATtern:WHEn:LESSLimit command.

Description

This command specifies the maximum time that the selected pattern may be true and still generate an A logic pattern search to place a mark. is the search number, which is always 1

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:PATtern:WHEn:LESSLimit? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:PATtern:WHEn:LESSLimit? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:PATtern:WHEn:LESSLimit value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:PATtern:WHEn:LESSLimit <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:PATtern:WHEn:LESSLimit?

Info

<NR3> is a floating point number that specifies the maximum amount of time to hold the pattern true.

SearchSearchItemTriggerALogicPatternWhenMorelimit ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:LOGIc:PATtern:WHEn:MORELimit command.

Description

This command specifies the minimum time that the selected pattern may be true and still generate an A logic pattern search to place a mark. SEARCH is the search number, which is always 1.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:PATtern:WHEn:MORELimit? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:PATtern:WHEn:MORELimit? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:PATtern:WHEn:MORELimit value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:PATtern:WHEn:MORELimit <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:PATtern:WHEn:MORELimit?

Info

<NR3> is a floating point number that specifies the minimum amount of time to hold the pattern true.

SearchSearchItemTriggerALogicThreshold ¶

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:LOGIc:THReshold command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:THReshold? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:THReshold? query and raise an AssertionError if the returned value does not match value.

Properties

.ch: The SEARCH:SEARCH<x>:TRIGger:A:LOGIc:THReshold:CH<x> command.
.math: The SEARCH:SEARCH<x>:TRIGger:A:LOGIc:THReshold:MATH command.
.ref: The SEARCH:SEARCH<x>:TRIGger:A:LOGIc:THReshold:REF<x> command.

ch `property` ¶

ch: dict[int, SearchSearchItemTriggerALogicThresholdChannel]

Return the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:THReshold:CH<x> command.

Description

Sets or returns the channel threshold level for a logic trigger search to determine where to place a mark. SEARCH is the search number and CH is the channel number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:THReshold:CH<x>? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:THReshold:CH<x>? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:THReshold:CH<x> value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:THReshold:CH<x> {<NR3>|TTL|ECL}
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:THReshold:CH<x>?

Info

<NR3> specifies the threshold voltage level.
TTL specifies a preset TTL high level of 1.4 V.
ECL specifies a preset ECL high level of -1.3 V.

math `property` ¶

math: SearchSearchItemTriggerALogicThresholdMath

Return the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:THReshold:MATH command.

Description

Sets or returns the math waveform threshold level for a logic trigger search to determine where to place a mark. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:THReshold:MATH? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:THReshold:MATH? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:THReshold:MATH value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:THReshold:MATH {TTL|ECL|<NR3>}
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:THReshold:MATH?

Info

TTL specifies a preset TTL high level of 1.4 V.
ECL specifies a preset ECL high level of -1.3 V.
<NR3> specifies the threshold voltage level.

ref `property` ¶

ref: dict[int, SearchSearchItemTriggerALogicThresholdRefItem]

Return the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:THReshold:REF<x> command.

Description

Sets or returns the reference waveform threshold level for a logic trigger search to determine where to place a mark. SEARCH is the search number and REF is the reference channel number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:THReshold:REF<x>? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:THReshold:REF<x>? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:THReshold:REF<x> value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:THReshold:REF<x> {TTL|ECL|<NR3>}
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:THReshold:REF<x>?

Info

TTL specifies a preset TTL high level of 1.4 V.
ECL specifies a preset ECL high level of -1.3 V.
<NR3> specifies the threshold voltage level.

SearchSearchItemTriggerALogicThresholdChannel ¶

Bases: ValidatedChannel, SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:LOGIc:THReshold:CH<x> command.

Description

Sets or returns the channel threshold level for a logic trigger search to determine where to place a mark. SEARCH is the search number and CH is the channel number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:THReshold:CH<x>? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:THReshold:CH<x>? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:THReshold:CH<x> value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:THReshold:CH<x> {<NR3>|TTL|ECL}
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:THReshold:CH<x>?

Info

<NR3> specifies the threshold voltage level.
TTL specifies a preset TTL high level of 1.4 V.
ECL specifies a preset ECL high level of -1.3 V.

SearchSearchItemTriggerALogicThresholdMath ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:LOGIc:THReshold:MATH command.

Description

Sets or returns the math waveform threshold level for a logic trigger search to determine where to place a mark. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:THReshold:MATH? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:THReshold:MATH? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:THReshold:MATH value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:THReshold:MATH {TTL|ECL|<NR3>}
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:THReshold:MATH?

Info

TTL specifies a preset TTL high level of 1.4 V.
ECL specifies a preset ECL high level of -1.3 V.
<NR3> specifies the threshold voltage level.

SearchSearchItemTriggerALogicThresholdRefItem ¶

Bases: ValidatedDynamicNumberCmd, SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:LOGIc:THReshold:REF<x> command.

Description

Sets or returns the reference waveform threshold level for a logic trigger search to determine where to place a mark. SEARCH is the search number and REF is the reference channel number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:THReshold:REF<x>? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:THReshold:REF<x>? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:THReshold:REF<x> value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:THReshold:REF<x> {TTL|ECL|<NR3>}
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:THReshold:REF<x>?

Info

TTL specifies a preset TTL high level of 1.4 V.
ECL specifies a preset ECL high level of -1.3 V.
<NR3> specifies the threshold voltage level.

SearchSearchItemTriggerALowerthreshold ¶

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:LOWerthreshold command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:LOWerthreshold? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LOWerthreshold? query and raise an AssertionError if the returned value does not match value.

Properties

.ch: The SEARCH:SEARCH<x>:TRIGger:A:LOWerthreshold:CH<x> command.
.math: The SEARCH:SEARCH<x>:TRIGger:A:LOWerthreshold:MATH command.
.ref: The SEARCH:SEARCH<x>:TRIGger:A:LOWerthreshold:REF<x> command.

ch `property` ¶

ch: dict[int, SearchSearchItemTriggerALowerthresholdChannel]

Return the SEARCH:SEARCH<x>:TRIGger:A:LOWerthreshold:CH<x> command.

Description

Sets or returns the channel waveform lower threshold to determine where to place a mark. This setting is applied to all channel searches that use a lower threshold. SEARCH is the search number and CH is the channel number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:LOWerthreshold:CH<x>? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LOWerthreshold:CH<x>? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LOWerthreshold:CH<x> value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:LOWerthreshold:CH<x> {TTL|ECL|<NR3>}
- SEARCH:SEARCH<x>:TRIGger:A:LOWerthreshold:CH<x>?

Info

TTL specifies a preset TTL level of 1.4 V.
ECL specifies a preset ECLlevel of -1.3 V.

math `property` ¶

math: SearchSearchItemTriggerALowerthresholdMath

Return the SEARCH:SEARCH<x>:TRIGger:A:LOWerthreshold:MATH command.

Description

Sets or returns the math waveform lower threshold to determine where to place a mark. This setting is applied to all math searches that use a lower threshold. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:LOWerthreshold:MATH? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LOWerthreshold:MATH? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LOWerthreshold:MATH value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:LOWerthreshold:MATH {TTL|ECL|<NR3>}
- SEARCH:SEARCH<x>:TRIGger:A:LOWerthreshold:MATH?

Info

TTL specifies a preset TTL level of 1.4 V.
ECL specifies a preset ECL level of -1.3 V.
<NR3> specifies the threshold voltage level.

ref `property` ¶

ref: dict[int, SearchSearchItemTriggerALowerthresholdRefItem]

Return the SEARCH:SEARCH<x>:TRIGger:A:LOWerthreshold:REF<x> command.

Description

Sets or returns the reference waveform lower threshold to determine where to place a mark. This setting is applied to all reference searches that use a lower threshold. SEARCH is the search number and REF is the reference channel number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:LOWerthreshold:REF<x>? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LOWerthreshold:REF<x>? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LOWerthreshold:REF<x> value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:LOWerthreshold:REF<x> {TTL|ECL|<NR3>}
- SEARCH:SEARCH<x>:TRIGger:A:LOWerthreshold:REF<x>?

Info

TTL specifies a preset TTL level of 1.4 V.
ECL specifies a preset ECL level of -1.3 V.
<NR3> specifies the threshold voltage level.

SearchSearchItemTriggerALowerthresholdChannel ¶

Bases: ValidatedChannel, SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:LOWerthreshold:CH<x> command.

Description

Sets or returns the channel waveform lower threshold to determine where to place a mark. This setting is applied to all channel searches that use a lower threshold. SEARCH is the search number and CH is the channel number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:LOWerthreshold:CH<x>? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LOWerthreshold:CH<x>? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LOWerthreshold:CH<x> value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:LOWerthreshold:CH<x> {TTL|ECL|<NR3>}
- SEARCH:SEARCH<x>:TRIGger:A:LOWerthreshold:CH<x>?

Info

TTL specifies a preset TTL level of 1.4 V.
ECL specifies a preset ECLlevel of -1.3 V.

SearchSearchItemTriggerALowerthresholdMath ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:LOWerthreshold:MATH command.

Description

Sets or returns the math waveform lower threshold to determine where to place a mark. This setting is applied to all math searches that use a lower threshold. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:LOWerthreshold:MATH? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LOWerthreshold:MATH? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LOWerthreshold:MATH value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:LOWerthreshold:MATH {TTL|ECL|<NR3>}
- SEARCH:SEARCH<x>:TRIGger:A:LOWerthreshold:MATH?

Info

TTL specifies a preset TTL level of 1.4 V.
ECL specifies a preset ECL level of -1.3 V.
<NR3> specifies the threshold voltage level.

SearchSearchItemTriggerALowerthresholdRefItem ¶

Bases: ValidatedDynamicNumberCmd, SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:LOWerthreshold:REF<x> command.

Description

Sets or returns the reference waveform lower threshold to determine where to place a mark. This setting is applied to all reference searches that use a lower threshold. SEARCH is the search number and REF is the reference channel number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:LOWerthreshold:REF<x>? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LOWerthreshold:REF<x>? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LOWerthreshold:REF<x> value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:LOWerthreshold:REF<x> {TTL|ECL|<NR3>}
- SEARCH:SEARCH<x>:TRIGger:A:LOWerthreshold:REF<x>?

Info

TTL specifies a preset TTL level of 1.4 V.
ECL specifies a preset ECL level of -1.3 V.
<NR3> specifies the threshold voltage level.

SearchSearchItemTriggerAPulsewidth ¶

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth? query and raise an AssertionError if the returned value does not match value.

Properties

.polarity: The SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:POLarity command.
.source: The SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:SOUrce command.
.when: The SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:WHEn command.
.width: The SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:WIDth command.

polarity `property` ¶

polarity: SearchSearchItemTriggerAPulsewidthPolarity

Return the SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:POLarity command.

Description

This command specifies the polarity for a pulse search to determine where to place a mark. SEARCH is the search number, which is always 1.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:POLarity? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:POLarity? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:POLarity value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:POLarity {NEGative|POSitive}
- SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:POLarity?

Info

POSITIVe places a mark only when the polarity of the pulse is positive.
NEGative places a mark only when the polarity of the pulse is negative.

source `property` ¶

source: SearchSearchItemTriggerAPulsewidthSource

Return the SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:SOUrce command.

Description

Sets or returns the source waveform for a pulse trigger search to determine where to place a mark. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:SOUrce? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:SOUrce? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:SOUrce value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:SOUrce {CH<x>|MATH|REF}
- SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:SOUrce?

Info

CH<x> specifies one input channel as the edge source, where = 1, 2, 3 or 4.
MATH specifies the math waveform as the search source.
REF specifies the reference waveform as the search source.

when `property` ¶

when: SearchSearchItemTriggerAPulsewidthWhen

Return the SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:WHEn command.

Description

Sets or returns the condition for generating a pulse width search to determine where to place a mark. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:WHEn? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:WHEn? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:WHEn value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:WHEn {LESSthan|MOREthan|EQual|UNEQual}
- SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:WHEn?

Info

LESSThan places a mark if the pulse width is less than the time set by the SEARCH:SEARCHX:TRIGGER:A:PULSEWIDTH:WIDTH command.
MOREthan places a mark if the pulse width is more than the time set by the SEARCH:SEARCHX:TRIGGER:A:PULSEWIDTH:WIDTH command.
EQUal places a mark if the pulse width is equal to the time set by the SEARCH:SEARCHX:TRIGGER:A:PULSEWIDTH:WIDTH command within a tolerance of ±5%.
UNEQual places a mark if the pulse width is unequal to the time the time set by the SEARCH:SEARCHX:TRIGGER:A:PULSEWIDTH:WIDTH command within a tolerance of ±5%.

width `property` ¶

width: SearchSearchItemTriggerAPulsewidthWidth

Return the SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:WIDth command.

Description

This command specifies the width setting to use, in seconds, when searching the waveform record for pulses of a certain width (duration). SEARCH is the search number, which is always 1.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:WIDth? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:WIDth? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:WIDth value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:WIDth <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:WIDth?

Info

<NR3> is a floating point number that specifies the pulse width.

SearchSearchItemTriggerAPulsewidthPolarity ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:POLarity command.

Description

This command specifies the polarity for a pulse search to determine where to place a mark. SEARCH is the search number, which is always 1.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:POLarity? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:POLarity? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:POLarity value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:POLarity {NEGative|POSitive}
- SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:POLarity?

Info

POSITIVe places a mark only when the polarity of the pulse is positive.
NEGative places a mark only when the polarity of the pulse is negative.

SearchSearchItemTriggerAPulsewidthSource ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:SOUrce command.

Description

Sets or returns the source waveform for a pulse trigger search to determine where to place a mark. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:SOUrce? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:SOUrce? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:SOUrce value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:SOUrce {CH<x>|MATH|REF}
- SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:SOUrce?

Info

CH<x> specifies one input channel as the edge source, where = 1, 2, 3 or 4.
MATH specifies the math waveform as the search source.
REF specifies the reference waveform as the search source.

SearchSearchItemTriggerAPulsewidthWhen ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:WHEn command.

Description

Sets or returns the condition for generating a pulse width search to determine where to place a mark. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:WHEn? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:WHEn? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:WHEn value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:WHEn {LESSthan|MOREthan|EQual|UNEQual}
- SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:WHEn?

Info

LESSThan places a mark if the pulse width is less than the time set by the SEARCH:SEARCHX:TRIGGER:A:PULSEWIDTH:WIDTH command.
MOREthan places a mark if the pulse width is more than the time set by the SEARCH:SEARCHX:TRIGGER:A:PULSEWIDTH:WIDTH command.
EQUal places a mark if the pulse width is equal to the time set by the SEARCH:SEARCHX:TRIGGER:A:PULSEWIDTH:WIDTH command within a tolerance of ±5%.
UNEQual places a mark if the pulse width is unequal to the time the time set by the SEARCH:SEARCHX:TRIGGER:A:PULSEWIDTH:WIDTH command within a tolerance of ±5%.

SearchSearchItemTriggerAPulsewidthWidth ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:WIDth command.

Description

This command specifies the width setting to use, in seconds, when searching the waveform record for pulses of a certain width (duration). SEARCH is the search number, which is always 1.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:WIDth? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:WIDth? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:WIDth value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:WIDth <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:WIDth?

Info

<NR3> is a floating point number that specifies the pulse width.

SearchSearchItemTriggerARisefall ¶

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:RISEFall command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:RISEFall? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:RISEFall? query and raise an AssertionError if the returned value does not match value.

Properties

.deltatime: The SEARCH:SEARCH<x>:TRIGger:A:RISEFall:DELTatime command.
.polarity: The SEARCH:SEARCH<x>:TRIGger:A:RISEFall:POLarity command.
.source: The SEARCH:SEARCH<x>:TRIGger:A:RISEFall:SOUrce command.
.when: The SEARCH:SEARCH<x>:TRIGger:A:RISEFall:WHEn command.

deltatime `property` ¶

deltatime: SearchSearchItemTriggerARisefallDeltatime

Return the SEARCH:SEARCH<x>:TRIGger:A:RISEFall:DELTatime command.

Description

This command specifies the transition delta time setting to be used as the value to compare against when a transition time is found. < SEARCH is the search number, which is always 1.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:RISEFall:DELTatime? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:RISEFall:DELTatime? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:RISEFall:DELTatime value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:RISEFall:DELTatime <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:RISEFall:DELTatime?

Info

<NR3> is a floating point number that specifies the transition time, in seconds.

polarity `property` ¶

polarity: SearchSearchItemTriggerARisefallPolarity

Return the SEARCH:SEARCH<x>:TRIGger:A:RISEFall:POLarity command.

Description

This command specifies the polarity setting for an transition search to determine where to place a mark. SEARCH is the search number, which is always 1.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:RISEFall:POLarity? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:RISEFall:POLarity? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:RISEFall:POLarity value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:RISEFall:POLarity {EITher|NEGative|POSitive}
- SEARCH:SEARCH<x>:TRIGger:A:RISEFall:POLarity?

Info

POSitive specifies that a pulse edge must traverse from the lower (most negative) to higher (most positive) level for transition searching to occur.
NEGative specifies that a pulse edge must traverse from the upper (most positive) to lower (most negative) level for transition searching to occur.
EITher specifies either positive or negative polarity.

source `property` ¶

source: SearchSearchItemTriggerARisefallSource

Return the SEARCH:SEARCH<x>:TRIGger:A:RISEFall:SOUrce command.

Description

Sets or returns the source setting for an transition trigger search to determine where to place a mark. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:RISEFall:SOUrce? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:RISEFall:SOUrce? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:RISEFall:SOUrce value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:RISEFall:SOUrce {CH<x>|MATH}
- SEARCH:SEARCH<x>:TRIGger:A:RISEFall:SOUrce?

Info

CH<x> specifies one input channel as the edge source. x has a minimum of 1 and a maximum of 4.
MATH specifies the math waveform as the search source.

when `property` ¶

when: SearchSearchItemTriggerARisefallWhen

Return the SEARCH:SEARCH<x>:TRIGger:A:RISEFall:WHEn command.

Description

This command specifies the condition for a transition search. SEARCH is the search number, which is always 1.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:RISEFall:WHEn? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:RISEFall:WHEn? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:RISEFall:WHEn value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:RISEFall:WHEn {SLOWer|FASTer|EQual|UNEQual}
- SEARCH:SEARCH<x>:TRIGger:A:RISEFall:WHEn?

Info

FASTer sets the search to occur when the transitioning signal is faster than the set volts/second rate.
SLOWer sets the search to occur when the transitioning signal is slower than the set volts/second rate.
EQual sets the search to occur when the transitioning signal is equal to the set volts/second rate within a ±5% tolerance.
UNEQual sets the search to occur when the transitioning signal is not equal to the set volts/second rate ±5%.

SearchSearchItemTriggerARisefallDeltatime ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:RISEFall:DELTatime command.

Description

This command specifies the transition delta time setting to be used as the value to compare against when a transition time is found. < SEARCH is the search number, which is always 1.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:RISEFall:DELTatime? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:RISEFall:DELTatime? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:RISEFall:DELTatime value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:RISEFall:DELTatime <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:RISEFall:DELTatime?

Info

<NR3> is a floating point number that specifies the transition time, in seconds.

SearchSearchItemTriggerARisefallPolarity ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:RISEFall:POLarity command.

Description

This command specifies the polarity setting for an transition search to determine where to place a mark. SEARCH is the search number, which is always 1.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:RISEFall:POLarity? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:RISEFall:POLarity? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:RISEFall:POLarity value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:RISEFall:POLarity {EITher|NEGative|POSitive}
- SEARCH:SEARCH<x>:TRIGger:A:RISEFall:POLarity?

Info

POSitive specifies that a pulse edge must traverse from the lower (most negative) to higher (most positive) level for transition searching to occur.
NEGative specifies that a pulse edge must traverse from the upper (most positive) to lower (most negative) level for transition searching to occur.
EITher specifies either positive or negative polarity.

SearchSearchItemTriggerARisefallSource ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:RISEFall:SOUrce command.

Description

Sets or returns the source setting for an transition trigger search to determine where to place a mark. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:RISEFall:SOUrce? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:RISEFall:SOUrce? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:RISEFall:SOUrce value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:RISEFall:SOUrce {CH<x>|MATH}
- SEARCH:SEARCH<x>:TRIGger:A:RISEFall:SOUrce?

Info

CH<x> specifies one input channel as the edge source. x has a minimum of 1 and a maximum of 4.
MATH specifies the math waveform as the search source.

SearchSearchItemTriggerARisefallWhen ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:RISEFall:WHEn command.

Description

This command specifies the condition for a transition search. SEARCH is the search number, which is always 1.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:RISEFall:WHEn? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:RISEFall:WHEn? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:RISEFall:WHEn value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:RISEFall:WHEn {SLOWer|FASTer|EQual|UNEQual}
- SEARCH:SEARCH<x>:TRIGger:A:RISEFall:WHEn?

Info

FASTer sets the search to occur when the transitioning signal is faster than the set volts/second rate.
SLOWer sets the search to occur when the transitioning signal is slower than the set volts/second rate.
EQual sets the search to occur when the transitioning signal is equal to the set volts/second rate within a ±5% tolerance.
UNEQual sets the search to occur when the transitioning signal is not equal to the set volts/second rate ±5%.

SearchSearchItemTriggerARunt ¶

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:RUNT command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:RUNT? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:RUNT? query and raise an AssertionError if the returned value does not match value.

Properties

.polarity: The SEARCH:SEARCH<x>:TRIGger:A:RUNT:POLarity command.
.source: The SEARCH:SEARCH<x>:TRIGger:A:RUNT:SOUrce command.
.when: The SEARCH:SEARCH<x>:TRIGger:A:RUNT:WHEn command.
.width: The SEARCH:SEARCH<x>:TRIGger:A:RUNT:WIDth command.

polarity `property` ¶

polarity: SearchSearchItemTriggerARuntPolarity

Return the SEARCH:SEARCH<x>:TRIGger:A:RUNT:POLarity command.

Description

This command specifies the polarity setting for a runt search to determine where to place a mark. SEARCH is the search number, which is always 1.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:RUNT:POLarity? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:RUNT:POLarity? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:RUNT:POLarity value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:RUNT:POLarity {EITher|NEGative|POSitive}
- SEARCH:SEARCH<x>:TRIGger:A:RUNT:POLarity?

Info

POSitive places a mark when the rising edge crosses the low threshold and the falling edge re-crosses the low threshold without either edge ever crossing the high threshold.
NEGative places a mark when the falling edge crosses the high threshold and the rising edge re-crosses the high threshold without either edge ever crossing the low threshold.
EITher places a mark on a runt of either polarity.

source `property` ¶

source: SearchSearchItemTriggerARuntSource

Return the SEARCH:SEARCH<x>:TRIGger:A:RUNT:SOUrce command.

Description

Sets or returns the source setting for a runt trigger search to determine where to place a mark. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:RUNT:SOUrce? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:RUNT:SOUrce? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:RUNT:SOUrce value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:RUNT:SOUrce {CH<x>|MATH|REF}
- SEARCH:SEARCH<x>:TRIGger:A:RUNT:SOUrce?

Info

CH<x> specifies an input channel as the edge source. x has a minimum of 1 and a maximum of 4.
MATH specifies the math waveform as the search source.
REF specifies the reference waveform as the search source.

when `property` ¶

when: SearchSearchItemTriggerARuntWhen

Return the SEARCH:SEARCH<x>:TRIGger:A:RUNT:WHEn command.

Description

Sets or returns the condition setting for a runt trigger search to determine where to place a mark. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:RUNT:WHEn? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:RUNT:WHEn? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:RUNT:WHEn value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:RUNT:WHEn {LESSthan|MOREthan|EQual|UNEQual|OCCURS}
- SEARCH:SEARCH<x>:TRIGger:A:RUNT:WHEn?

Info

OCCURS argument specifies a trigger event if a runt of any detectable width occurs.
LESSthan argument sets the oscilloscope to trigger if the a runt pulse is detected with width less than the time set by the SEARCH:SEARCHX:TRIGGER:A:RUNT:WIDTH command.
MOREthan argument sets the oscilloscope to trigger if the a runt pulse is detected with width more than the time set by the SEARCH:SEARCHX:TRIGGER:A:RUNT:WIDTH command.
EQUal argument sets the oscilloscope to trigger when the pattern is true for a time period equal to the time period specified in SEARCH:SEARCHX:TRIGGER:A:RUNT:WIDTH within a ±5% tolerance.
NOTEQual argument sets the oscilloscope to trigger when the pattern is true for a time period greater than or less than (but not equal) the time period specified in SEARCH:SEARCHX:TRIGGER:A:RUNT:WIDTH within a ±5% tolerance.

width `property` ¶

width: SearchSearchItemTriggerARuntWidth

Return the SEARCH:SEARCH<x>:TRIGger:A:RUNT:WIDth command.

Description

This command sets or queries the width setting for a runt trigger search to determine where to place a mark. The search number is specified by x.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:RUNT:WIDth? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:RUNT:WIDth? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:RUNT:WIDth value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:RUNT:WIDth <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:RUNT:WIDth?

Info

<NR3> specifies the minimum width in seconds.

SearchSearchItemTriggerARuntPolarity ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:RUNT:POLarity command.

Description

This command specifies the polarity setting for a runt search to determine where to place a mark. SEARCH is the search number, which is always 1.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:RUNT:POLarity? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:RUNT:POLarity? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:RUNT:POLarity value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:RUNT:POLarity {EITher|NEGative|POSitive}
- SEARCH:SEARCH<x>:TRIGger:A:RUNT:POLarity?

Info

POSitive places a mark when the rising edge crosses the low threshold and the falling edge re-crosses the low threshold without either edge ever crossing the high threshold.
NEGative places a mark when the falling edge crosses the high threshold and the rising edge re-crosses the high threshold without either edge ever crossing the low threshold.
EITher places a mark on a runt of either polarity.

SearchSearchItemTriggerARuntSource ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:RUNT:SOUrce command.

Description

Sets or returns the source setting for a runt trigger search to determine where to place a mark. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:RUNT:SOUrce? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:RUNT:SOUrce? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:RUNT:SOUrce value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:RUNT:SOUrce {CH<x>|MATH|REF}
- SEARCH:SEARCH<x>:TRIGger:A:RUNT:SOUrce?

Info

CH<x> specifies an input channel as the edge source. x has a minimum of 1 and a maximum of 4.
MATH specifies the math waveform as the search source.
REF specifies the reference waveform as the search source.

SearchSearchItemTriggerARuntWhen ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:RUNT:WHEn command.

Description

Sets or returns the condition setting for a runt trigger search to determine where to place a mark. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:RUNT:WHEn? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:RUNT:WHEn? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:RUNT:WHEn value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:RUNT:WHEn {LESSthan|MOREthan|EQual|UNEQual|OCCURS}
- SEARCH:SEARCH<x>:TRIGger:A:RUNT:WHEn?

Info

OCCURS argument specifies a trigger event if a runt of any detectable width occurs.
LESSthan argument sets the oscilloscope to trigger if the a runt pulse is detected with width less than the time set by the SEARCH:SEARCHX:TRIGGER:A:RUNT:WIDTH command.
MOREthan argument sets the oscilloscope to trigger if the a runt pulse is detected with width more than the time set by the SEARCH:SEARCHX:TRIGGER:A:RUNT:WIDTH command.
EQUal argument sets the oscilloscope to trigger when the pattern is true for a time period equal to the time period specified in SEARCH:SEARCHX:TRIGGER:A:RUNT:WIDTH within a ±5% tolerance.
NOTEQual argument sets the oscilloscope to trigger when the pattern is true for a time period greater than or less than (but not equal) the time period specified in SEARCH:SEARCHX:TRIGGER:A:RUNT:WIDTH within a ±5% tolerance.

SearchSearchItemTriggerARuntWidth ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:RUNT:WIDth command.

Description

This command sets or queries the width setting for a runt trigger search to determine where to place a mark. The search number is specified by x.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:RUNT:WIDth? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:RUNT:WIDth? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:RUNT:WIDth value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:RUNT:WIDth <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:RUNT:WIDth?

Info

<NR3> specifies the minimum width in seconds.

SearchSearchItemTriggerASethold ¶

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:SETHold command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold? query and raise an AssertionError if the returned value does not match value.

Properties

.clock: The SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk command tree.
.data: The SEARCH:SEARCH<x>:TRIGger:A:SETHold:DATa command tree.
.holdtime: The SEARCH:SEARCH<x>:TRIGger:A:SETHold:HOLDTime command.
.settime: The SEARCH:SEARCH<x>:TRIGger:A:SETHold:SETTime command.
.threshold: The SEARCH:SEARCH<x>:TRIGger:A:SETHold:THReshold command tree.

clock `property` ¶

clock: SearchSearchItemTriggerASetholdClock

Return the SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.edge: The SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:EDGE command.
.source: The SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:SOUrce command.
.threshold: The SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:THReshold command.

data `property` ¶

data: SearchSearchItemTriggerASetholdData

Return the SEARCH:SEARCH<x>:TRIGger:A:SETHold:DATa command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:DATa? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:DATa? query and raise an AssertionError if the returned value does not match value.

Info

CH<x> specifies an input channel as the search source. x has a minimum of 1 and a maximum of 4.

Sub-properties

.source: The SEARCH:SEARCH<x>:TRIGger:A:SETHold:DATa:SOUrce command.
.threshold: The SEARCH:SEARCH<x>:TRIGger:A:SETHold:DATa:THReshold command.

holdtime `property` ¶

holdtime: SearchSearchItemTriggerASetholdHoldtime

Return the SEARCH:SEARCH<x>:TRIGger:A:SETHold:HOLDTime command.

Description

This command sets or queries the hold time setting for a setup/hold trigger search to determine where to place a mark. The search number is specified by x.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:HOLDTime? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:HOLDTime? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:HOLDTime value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:SETHold:HOLDTime <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:SETHold:HOLDTime?

Info

<NR3> specifies the hold time setting in seconds. Positive values for hold time occur after the clock edge. Negative values occur before the clock edge.

settime `property` ¶

settime: SearchSearchItemTriggerASetholdSettime

Return the SEARCH:SEARCH<x>:TRIGger:A:SETHold:SETTime command.

Description

This command sets or queries the setup time setting for a setup/hold trigger search to determine where to place a mark. The search number is specified by x.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:SETTime? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:SETTime? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:SETTime value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:SETHold:SETTime <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:SETHold:SETTime?

Info

<NR3> specifies the setup time for setup and hold violation triggering.

threshold `property` ¶

threshold: SearchSearchItemTriggerASetholdThreshold

Return the SEARCH:SEARCH<x>:TRIGger:A:SETHold:THReshold command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:THReshold? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:THReshold? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.ch: The SEARCH:SEARCH<x>:TRIGger:A:SETHold:THReshold:CH<x> command.
.ref: The SEARCH:SEARCH<x>:TRIGger:A:SETHold:THReshold:REF<x> command.
.math: The SEARCH:SEARCH<x>:TRIGger:A:SETHold:THReshold:MATH command.
.math1: The SEARCH:SEARCH<x>:TRIGger:A:SETHold:THReshold:MATH1 command.

SearchSearchItemTriggerASetholdClock ¶

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk? query and raise an AssertionError if the returned value does not match value.

Properties

.edge: The SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:EDGE command.
.source: The SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:SOUrce command.
.threshold: The SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:THReshold command.

edge `property` ¶

edge: SearchSearchItemTriggerASetholdClockEdge

Return the SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:EDGE command.

Description

This command sets or queries the clock slope setting for a setup/hold trigger search to determine where to place a mark. The search number is specified by x.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:EDGE? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:EDGE? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:EDGE value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:EDGE {FALL|RISe}
- SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:EDGE?

Info

FALL specifies the polarity as the clock falling edge.
RISe specifies the polarity as the clock rising edge.

source `property` ¶

source: SearchSearchItemTriggerASetholdClockSource

Return the SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:SOUrce command.

Description

Sets or returns the clock source setting for an setup/hold trigger search to determine where to place a mark. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:SOUrce? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:SOUrce? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:SOUrce value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:SOUrce {CH<x>|MATH|REF}
- SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:SOUrce?

Info

CH<x> specifies an input channel as the edge source. x has a minimum of 1 and a maximum of 4.
MATH specifies the math waveform as the search source.
REF specifies the reference waveform as the search source.

threshold `property` ¶

threshold: SearchSearchItemTriggerASetholdClockThreshold

Return the SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:THReshold command.

Description

This command specifies the clock threshold setting for an setup/hold search to determine where to place a mark. SEARCH is the search number, which is always 1.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:THReshold? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:THReshold? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:THReshold value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:THReshold {<NR3>|TTL|ECL}
- SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:THReshold?

Info

TTL specifies a preset TTL high level of 1.4 V.
ECL specifies a preset ECL high level of -1.3V.
<NR3> is a floating point number that specifies the clock level, in volts.

SearchSearchItemTriggerASetholdClockEdge ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:EDGE command.

Description

This command sets or queries the clock slope setting for a setup/hold trigger search to determine where to place a mark. The search number is specified by x.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:EDGE? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:EDGE? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:EDGE value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:EDGE {FALL|RISe}
- SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:EDGE?

Info

FALL specifies the polarity as the clock falling edge.
RISe specifies the polarity as the clock rising edge.

SearchSearchItemTriggerASetholdClockSource ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:SOUrce command.

Description

Sets or returns the clock source setting for an setup/hold trigger search to determine where to place a mark. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:SOUrce? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:SOUrce? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:SOUrce value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:SOUrce {CH<x>|MATH|REF}
- SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:SOUrce?

Info

CH<x> specifies an input channel as the edge source. x has a minimum of 1 and a maximum of 4.
MATH specifies the math waveform as the search source.
REF specifies the reference waveform as the search source.

SearchSearchItemTriggerASetholdClockThreshold ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:THReshold command.

Description

This command specifies the clock threshold setting for an setup/hold search to determine where to place a mark. SEARCH is the search number, which is always 1.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:THReshold? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:THReshold? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:THReshold value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:THReshold {<NR3>|TTL|ECL}
- SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:THReshold?

Info

TTL specifies a preset TTL high level of 1.4 V.
ECL specifies a preset ECL high level of -1.3V.
<NR3> is a floating point number that specifies the clock level, in volts.

SearchSearchItemTriggerASetholdData ¶

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:SETHold:DATa command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:DATa? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:DATa? query and raise an AssertionError if the returned value does not match value.

Info

CH<x> specifies an input channel as the search source. x has a minimum of 1 and a maximum of 4.

Properties

.source: The SEARCH:SEARCH<x>:TRIGger:A:SETHold:DATa:SOUrce command.
.threshold: The SEARCH:SEARCH<x>:TRIGger:A:SETHold:DATa:THReshold command.

source `property` ¶

source: SearchSearchItemTriggerASetholdDataSource

Return the SEARCH:SEARCH<x>:TRIGger:A:SETHold:DATa:SOUrce command.

Description

Sets or returns the data source setting for an setup/hold trigger search to determine where to place a mark. is the search number. You cannot specify the same source for both clock and data.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:DATa:SOUrce? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:DATa:SOUrce? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:DATa:SOUrce value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:SETHold:DATa:SOUrce DPO Models:{CH<x>|MATH|REF|D<x>}
- SEARCH:SEARCH<x>:TRIGger:A:SETHold:DATa:SOUrce?

Info

CH<x> specifies an input channel as the search source. x has a minimum of 1 and a maximum of 4.
MATH specifies the math waveform as the search source.
REF specifies the reference waveform as the search source.
D<x> specifies the digital waveform as the search source. x has a minimum of 0 and a maximum of 15.

threshold `property` ¶

threshold: SearchSearchItemTriggerASetholdDataThreshold

Return the SEARCH:SEARCH<x>:TRIGger:A:SETHold:DATa:THReshold command.

Description

Sets or returns the data threshold setting for an setup/hold trigger search to determine where to place a mark. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:DATa:THReshold? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:DATa:THReshold? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:DATa:THReshold value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:SETHold:DATa:THReshold {<NR3>|TTL|ECL}
- SEARCH:SEARCH<x>:TRIGger:A:SETHold:DATa:THReshold?

Info

TTL specifies a preset TTL high level of 1.4 V.
ECL specifies a preset ECL high level of -1.3 V.
<NR3> is the clock level, in volts.

SearchSearchItemTriggerASetholdDataSource ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:SETHold:DATa:SOUrce command.

Description

Sets or returns the data source setting for an setup/hold trigger search to determine where to place a mark. is the search number. You cannot specify the same source for both clock and data.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:DATa:SOUrce? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:DATa:SOUrce? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:DATa:SOUrce value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:SETHold:DATa:SOUrce DPO Models:{CH<x>|MATH|REF|D<x>}
- SEARCH:SEARCH<x>:TRIGger:A:SETHold:DATa:SOUrce?

Info

CH<x> specifies an input channel as the search source. x has a minimum of 1 and a maximum of 4.
MATH specifies the math waveform as the search source.
REF specifies the reference waveform as the search source.
D<x> specifies the digital waveform as the search source. x has a minimum of 0 and a maximum of 15.

SearchSearchItemTriggerASetholdDataThreshold ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:SETHold:DATa:THReshold command.

Description

Sets or returns the data threshold setting for an setup/hold trigger search to determine where to place a mark. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:DATa:THReshold? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:DATa:THReshold? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:DATa:THReshold value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:SETHold:DATa:THReshold {<NR3>|TTL|ECL}
- SEARCH:SEARCH<x>:TRIGger:A:SETHold:DATa:THReshold?

Info

TTL specifies a preset TTL high level of 1.4 V.
ECL specifies a preset ECL high level of -1.3 V.
<NR3> is the clock level, in volts.

SearchSearchItemTriggerASetholdHoldtime ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:SETHold:HOLDTime command.

Description

This command sets or queries the hold time setting for a setup/hold trigger search to determine where to place a mark. The search number is specified by x.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:HOLDTime? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:HOLDTime? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:HOLDTime value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:SETHold:HOLDTime <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:SETHold:HOLDTime?

Info

<NR3> specifies the hold time setting in seconds. Positive values for hold time occur after the clock edge. Negative values occur before the clock edge.

SearchSearchItemTriggerASetholdSettime ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:SETHold:SETTime command.

Description

This command sets or queries the setup time setting for a setup/hold trigger search to determine where to place a mark. The search number is specified by x.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:SETTime? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:SETTime? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:SETTime value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:SETHold:SETTime <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:SETHold:SETTime?

Info

<NR3> specifies the setup time for setup and hold violation triggering.

SearchSearchItemTriggerASetholdThreshold ¶

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:SETHold:THReshold command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:THReshold? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:THReshold? query and raise an AssertionError if the returned value does not match value.

Properties

.ch: The SEARCH:SEARCH<x>:TRIGger:A:SETHold:THReshold:CH<x> command.
.ref: The SEARCH:SEARCH<x>:TRIGger:A:SETHold:THReshold:REF<x> command.
.math: The SEARCH:SEARCH<x>:TRIGger:A:SETHold:THReshold:MATH command.
.math1: The SEARCH:SEARCH<x>:TRIGger:A:SETHold:THReshold:MATH1 command.

ch `property` ¶

ch: dict[int, SearchSearchItemTriggerASetholdThresholdChannel]

Return the SEARCH:SEARCH<x>:TRIGger:A:SETHold:THReshold:CH<x> command.

Description

Sets or returns the trigger search setup and hold lower threshold to determine where to place a mark. Search is the search number, which is always 1. CH is the channel number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:THReshold:CH<x>? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:THReshold:CH<x>? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:THReshold:CH<x> value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:SETHold:THReshold:CH<x> <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:SETHold:THReshold:CH<x>?

Info

<NR3> is the lower threshold in volts.

math `property` ¶

math: SearchSearchItemTriggerASetholdThresholdMath

Return the SEARCH:SEARCH<x>:TRIGger:A:SETHold:THReshold:MATH command.

Description

This command specifies the search setup and hold threshold for the math waveform. This helps to determine where to place search marks. Search is the search number, which is always 1.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:THReshold:MATH? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:THReshold:MATH? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:THReshold:MATH value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:SETHold:THReshold:MATH <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:SETHold:THReshold:MATH?

Info

<NR3> is a floating point number that specifies the lower threshold in volts.

math1 `property` ¶

math1: SearchSearchItemTriggerASetholdThresholdMath1

Return the SEARCH:SEARCH<x>:TRIGger:A:SETHold:THReshold:MATH1 command.

Description

This command specifies the search setup and hold threshold for the math waveform. This helps to determine where to place search marks. Search is the search number, which is always 1.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:THReshold:MATH1? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:THReshold:MATH1? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:THReshold:MATH1 value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:SETHold:THReshold:MATH1 <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:SETHold:THReshold:MATH1?

Info

<NR3> is a floating point number that specifies the lower threshold in volts.

ref `property` ¶

ref: dict[int, SearchSearchItemTriggerASetholdThresholdRefItem]

Return the SEARCH:SEARCH<x>:TRIGger:A:SETHold:THReshold:REF<x> command.

Description

This command specifies the search setup and hold threshold for the selected reference waveform. This helps to determine where to place search marks. Search is the search number, which is always 1. REF is the reference waveform number, which can be 1-4.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:THReshold:REF<x>? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:THReshold:REF<x>? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:THReshold:REF<x> value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:SETHold:THReshold:REF<x> <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:SETHold:THReshold:REF<x>?

Info

<NR3> is a floating point number that specifies the lower threshold in volts.

SearchSearchItemTriggerASetholdThresholdChannel ¶

Bases: ValidatedChannel, SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:SETHold:THReshold:CH<x> command.

Description

Sets or returns the trigger search setup and hold lower threshold to determine where to place a mark. Search is the search number, which is always 1. CH is the channel number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:THReshold:CH<x>? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:THReshold:CH<x>? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:THReshold:CH<x> value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:SETHold:THReshold:CH<x> <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:SETHold:THReshold:CH<x>?

Info

<NR3> is the lower threshold in volts.

SearchSearchItemTriggerASetholdThresholdMath ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:SETHold:THReshold:MATH command.

Description

This command specifies the search setup and hold threshold for the math waveform. This helps to determine where to place search marks. Search is the search number, which is always 1.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:THReshold:MATH? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:THReshold:MATH? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:THReshold:MATH value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:SETHold:THReshold:MATH <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:SETHold:THReshold:MATH?

Info

<NR3> is a floating point number that specifies the lower threshold in volts.

SearchSearchItemTriggerASetholdThresholdMath1 ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:SETHold:THReshold:MATH1 command.

Description

This command specifies the search setup and hold threshold for the math waveform. This helps to determine where to place search marks. Search is the search number, which is always 1.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:THReshold:MATH1? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:THReshold:MATH1? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:THReshold:MATH1 value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:SETHold:THReshold:MATH1 <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:SETHold:THReshold:MATH1?

Info

<NR3> is a floating point number that specifies the lower threshold in volts.

SearchSearchItemTriggerASetholdThresholdRefItem ¶

Bases: ValidatedDynamicNumberCmd, SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:SETHold:THReshold:REF<x> command.

Description

This command specifies the search setup and hold threshold for the selected reference waveform. This helps to determine where to place search marks. Search is the search number, which is always 1. REF is the reference waveform number, which can be 1-4.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:THReshold:REF<x>? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:THReshold:REF<x>? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:THReshold:REF<x> value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:SETHold:THReshold:REF<x> <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:SETHold:THReshold:REF<x>?

Info

<NR3> is a floating point number that specifies the lower threshold in volts.

SearchSearchItemTriggerATransition ¶

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:TRANsition command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:TRANsition? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:TRANsition? query and raise an AssertionError if the returned value does not match value.

Properties

.deltatime: The SEARCH:SEARCH<x>:TRIGger:A:TRANsition:DELTatime command.
.polarity: The SEARCH:SEARCH<x>:TRIGger:A:TRANsition:POLarity command.
.source: The SEARCH:SEARCH<x>:TRIGger:A:TRANsition:SOUrce command.
.when: The SEARCH:SEARCH<x>:TRIGger:A:TRANsition:WHEn command.

deltatime `property` ¶

deltatime: SearchSearchItemTriggerATransitionDeltatime

Return the SEARCH:SEARCH<x>:TRIGger:A:TRANsition:DELTatime command.

Description

This command specifies the transition delta time setting to be used as the value to compare against when a transition time is found. < SEARCH is the search number, which is always 1.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:TRANsition:DELTatime? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:TRANsition:DELTatime? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:TRANsition:DELTatime value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:TRANsition:DELTatime <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:TRANsition:DELTatime?

Info

<NR3> is a floating point number that specifies the transition time, in seconds.

polarity `property` ¶

polarity: SearchSearchItemTriggerATransitionPolarity

Return the SEARCH:SEARCH<x>:TRIGger:A:TRANsition:POLarity command.

Description

This command specifies the polarity setting for an transition search to determine where to place a mark. SEARCH is the search number, which is always 1.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:TRANsition:POLarity? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:TRANsition:POLarity? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:TRANsition:POLarity value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:TRANsition:POLarity {EITher|NEGative|POSitive}
- SEARCH:SEARCH<x>:TRIGger:A:TRANsition:POLarity?

Info

POSitive specifies that a pulse edge must traverse from the lower (most negative) to higher (most positive) level for transition searching to occur.
NEGative specifies that a pulse edge must traverse from the upper (most positive) to lower (most negative) level for transition searching to occur.
EITher specifies either positive or negative polarity.

source `property` ¶

source: SearchSearchItemTriggerATransitionSource

Return the SEARCH:SEARCH<x>:TRIGger:A:TRANsition:SOUrce command.

Description

Sets or returns the source setting for an transition trigger search to determine where to place a mark. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:TRANsition:SOUrce? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:TRANsition:SOUrce? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:TRANsition:SOUrce value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:TRANsition:SOUrce {CH<x>|MATH}
- SEARCH:SEARCH<x>:TRIGger:A:TRANsition:SOUrce?

Info

CH<x> specifies one input channel as the edge source. x has a minimum of 1 and a maximum of 4.
MATH specifies the math waveform as the search source.

when `property` ¶

when: SearchSearchItemTriggerATransitionWhen

Return the SEARCH:SEARCH<x>:TRIGger:A:TRANsition:WHEn command.

Description

This command specifies the condition for a transition search. SEARCH is the search number, which is always 1.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:TRANsition:WHEn? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:TRANsition:WHEn? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:TRANsition:WHEn value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:TRANsition:WHEn {SLOWer|FASTer|EQual|UNEQual}
- SEARCH:SEARCH<x>:TRIGger:A:TRANsition:WHEn?

Info

FASTer sets the search to occur when the transitioning signal is faster than the set volts/second rate.
SLOWer sets the search to occur when the transitioning signal is slower than the set volts/second rate.
EQual sets the search to occur when the transitioning signal is equal to the set volts/second rate within a ±5% tolerance.
UNEQual sets the search to occur when the transitioning signal is not equal to the set volts/second rate ±5%.

SearchSearchItemTriggerATransitionDeltatime ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:TRANsition:DELTatime command.

Description

This command specifies the transition delta time setting to be used as the value to compare against when a transition time is found. < SEARCH is the search number, which is always 1.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:TRANsition:DELTatime? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:TRANsition:DELTatime? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:TRANsition:DELTatime value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:TRANsition:DELTatime <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:TRANsition:DELTatime?

Info

<NR3> is a floating point number that specifies the transition time, in seconds.

SearchSearchItemTriggerATransitionPolarity ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:TRANsition:POLarity command.

Description

This command specifies the polarity setting for an transition search to determine where to place a mark. SEARCH is the search number, which is always 1.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:TRANsition:POLarity? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:TRANsition:POLarity? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:TRANsition:POLarity value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:TRANsition:POLarity {EITher|NEGative|POSitive}
- SEARCH:SEARCH<x>:TRIGger:A:TRANsition:POLarity?

Info

POSitive specifies that a pulse edge must traverse from the lower (most negative) to higher (most positive) level for transition searching to occur.
NEGative specifies that a pulse edge must traverse from the upper (most positive) to lower (most negative) level for transition searching to occur.
EITher specifies either positive or negative polarity.

SearchSearchItemTriggerATransitionSource ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:TRANsition:SOUrce command.

Description

Sets or returns the source setting for an transition trigger search to determine where to place a mark. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:TRANsition:SOUrce? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:TRANsition:SOUrce? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:TRANsition:SOUrce value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:TRANsition:SOUrce {CH<x>|MATH}
- SEARCH:SEARCH<x>:TRIGger:A:TRANsition:SOUrce?

Info

CH<x> specifies one input channel as the edge source. x has a minimum of 1 and a maximum of 4.
MATH specifies the math waveform as the search source.

SearchSearchItemTriggerATransitionWhen ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:TRANsition:WHEn command.

Description

This command specifies the condition for a transition search. SEARCH is the search number, which is always 1.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:TRANsition:WHEn? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:TRANsition:WHEn? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:TRANsition:WHEn value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:TRANsition:WHEn {SLOWer|FASTer|EQual|UNEQual}
- SEARCH:SEARCH<x>:TRIGger:A:TRANsition:WHEn?

Info

FASTer sets the search to occur when the transitioning signal is faster than the set volts/second rate.
SLOWer sets the search to occur when the transitioning signal is slower than the set volts/second rate.
EQual sets the search to occur when the transitioning signal is equal to the set volts/second rate within a ±5% tolerance.
UNEQual sets the search to occur when the transitioning signal is not equal to the set volts/second rate ±5%.

SearchSearchItemTriggerAType ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:TYPe command.

Description

Sets or returns the trigger type setting for a search to determine where to place a mark. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:TYPe? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:TYPe? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:TYPe value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:TYPe {EDGe|SETHold|PULSEWidth|RUNt|TRAnsition|LOGIc|BUS (with the appropriate application module installed)}
- SEARCH:SEARCH<x>:TRIGger:A:TYPe?

Info

RUNt triggers when a pulse crosses the first preset voltage threshold but does not cross the second preset threshold before recrossing the first. The thresholds are set with the SEARCH:SEARCHX:TRIGGER:A:LOWERTHRESHOLD:CHX and SEARCH:SEARCHX:TRIGGER:A:UPPERTHRESHOLD:CHX commands.
PULSEWIdth triggers when a pulse is found that has the specified polarity and is either inside or outside the limits as specified by SEARCH:SEARCHX:TRIGGER:A:LOGIC:PATTERN:WHEN:LESSLIMIT and SEARCH:SEARCHX:TRIGGER:A:LOGIC:PATTERN:WHEN:MORELIMIT. The polarity is selected using the SEARCH:SEARCHX:TRIGGER:A:RUNT:POLARITY command.
TRAnsition triggers when a pulse crosses both thresholds in the same direction as the specified polarity and the transition time between the two threshold crossings is greater or less than the specified time delta.

SearchSearchItemTriggerAUpperthreshold ¶

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:UPPerthreshold command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:UPPerthreshold? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:UPPerthreshold? query and raise an AssertionError if the returned value does not match value.

Properties

.ch: The SEARCH:SEARCH<x>:TRIGger:A:UPPerthreshold:CH<x> command.
.math: The SEARCH:SEARCH<x>:TRIGger:A:UPPerthreshold:MATH command.
.ref: The SEARCH:SEARCH<x>:TRIGger:A:UPPerthreshold:REF<x> command.

ch `property` ¶

ch: dict[int, SearchSearchItemTriggerAUpperthresholdChannel]

Return the SEARCH:SEARCH<x>:TRIGger:A:UPPerthreshold:CH<x> command.

Description

Sets or returns the channel waveform upper threshold to determine where to place a mark. This setting is applied to all channel searches that uses an upper threshold. SEARCH is the search number and CH is the channel number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:UPPerthreshold:CH<x>? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:UPPerthreshold:CH<x>? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:UPPerthreshold:CH<x> value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:UPPerthreshold:CH<x> {TTL|ECL}
- SEARCH:SEARCH<x>:TRIGger:A:UPPerthreshold:CH<x>?

Info

TTL specifies a preset TTL high level of 1.4 V.
ECL specifies a preset ECL high level of -1.3 V.

math `property` ¶

math: SearchSearchItemTriggerAUpperthresholdMath

Return the SEARCH:SEARCH<x>:TRIGger:A:UPPerthreshold:MATH command.

Description

Sets or returns the math waveform upper threshold to determine where to place a mark. This setting is applied to all math waveform searches that uses an upper threshold. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:UPPerthreshold:MATH? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:UPPerthreshold:MATH? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:UPPerthreshold:MATH value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:UPPerthreshold:MATH {TTL|ECL}
- SEARCH:SEARCH<x>:TRIGger:A:UPPerthreshold:MATH?

Info

TTL specifies a preset TTL high level of 1.4 V.
ECL specifies a preset ECL high level of -1.3 V.

ref `property` ¶

ref: dict[int, SearchSearchItemTriggerAUpperthresholdRefItem]

Return the SEARCH:SEARCH<x>:TRIGger:A:UPPerthreshold:REF<x> command.

Description

Sets or returns the reference waveform upper threshold to determine where to place a mark. This setting is applied to all reference waveform searches that uses an upper threshold. SEARCH is the search number and REF is the reference channel number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:UPPerthreshold:REF<x>? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:UPPerthreshold:REF<x>? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:UPPerthreshold:REF<x> value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:UPPerthreshold:REF<x> {TTL|ECL}
- SEARCH:SEARCH<x>:TRIGger:A:UPPerthreshold:REF<x>?

Info

TTL specifies a preset TTL high level of 1.4 V.
ECL specifies a preset ECL high level of -1.3 V.

SearchSearchItemTriggerAUpperthresholdChannel ¶

Bases: ValidatedChannel, SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:UPPerthreshold:CH<x> command.

Description

Sets or returns the channel waveform upper threshold to determine where to place a mark. This setting is applied to all channel searches that uses an upper threshold. SEARCH is the search number and CH is the channel number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:UPPerthreshold:CH<x>? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:UPPerthreshold:CH<x>? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:UPPerthreshold:CH<x> value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:UPPerthreshold:CH<x> {TTL|ECL}
- SEARCH:SEARCH<x>:TRIGger:A:UPPerthreshold:CH<x>?

Info

TTL specifies a preset TTL high level of 1.4 V.
ECL specifies a preset ECL high level of -1.3 V.

SearchSearchItemTriggerAUpperthresholdMath ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:UPPerthreshold:MATH command.

Description

Sets or returns the math waveform upper threshold to determine where to place a mark. This setting is applied to all math waveform searches that uses an upper threshold. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:UPPerthreshold:MATH? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:UPPerthreshold:MATH? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:UPPerthreshold:MATH value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:UPPerthreshold:MATH {TTL|ECL}
- SEARCH:SEARCH<x>:TRIGger:A:UPPerthreshold:MATH?

Info

TTL specifies a preset TTL high level of 1.4 V.
ECL specifies a preset ECL high level of -1.3 V.

SearchSearchItemTriggerAUpperthresholdRefItem ¶

Bases: ValidatedDynamicNumberCmd, SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:UPPerthreshold:REF<x> command.

Description

Sets or returns the reference waveform upper threshold to determine where to place a mark. This setting is applied to all reference waveform searches that uses an upper threshold. SEARCH is the search number and REF is the reference channel number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:UPPerthreshold:REF<x>? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:UPPerthreshold:REF<x>? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:UPPerthreshold:REF<x> value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:UPPerthreshold:REF<x> {TTL|ECL}
- SEARCH:SEARCH<x>:TRIGger:A:UPPerthreshold:REF<x>?

Info

TTL specifies a preset TTL high level of 1.4 V.
ECL specifies a preset ECL high level of -1.3 V.

search ¶

Search ¶

search property ¶

SearchSearchItem ¶

copy property ¶

state property ¶

total property ¶

trigger property ¶

SearchSearchItemCopy ¶

SearchSearchItemState ¶

SearchSearchItemTotal ¶

SearchSearchItemTrigger ¶

a property ¶

SearchSearchItemTriggerA ¶

bus property ¶

edge property ¶

level property ¶

logic property ¶

lowerthreshold property ¶

pulsewidth property ¶

risefall property ¶

runt property ¶

sethold property ¶

transition property ¶

type property ¶

upperthreshold property ¶

SearchSearchItemTriggerABus ¶

b property ¶

source property ¶

SearchSearchItemTriggerABusBItem ¶

can property ¶

flexray property ¶

i2c property ¶

lin property ¶

parallel property ¶

rs232c property ¶

spi property ¶

SearchSearchItemTriggerABusBItemCan ¶

address property ¶

condition property ¶

data property ¶

frametype property ¶

identifier property ¶

SearchSearchItemTriggerABusBItemCanAddress ¶

mode property ¶

value property ¶

SearchSearchItemTriggerABusBItemCanAddressMode ¶

SearchSearchItemTriggerABusBItemCanAddressValue ¶

SearchSearchItemTriggerABusBItemCanCondition ¶

SearchSearchItemTriggerABusBItemCanData ¶

direction property ¶

qualifier property ¶

size property ¶

value property ¶

SearchSearchItemTriggerABusBItemCanDataDirection ¶

SearchSearchItemTriggerABusBItemCanDataQualifier ¶

SearchSearchItemTriggerABusBItemCanDataSize ¶

SearchSearchItemTriggerABusBItemCanDataValue ¶

SearchSearchItemTriggerABusBItemCanFrametype ¶

SearchSearchItemTriggerABusBItemCanIdentifier ¶

mode property ¶

value property ¶

SearchSearchItemTriggerABusBItemCanIdentifierMode ¶

SearchSearchItemTriggerABusBItemCanIdentifierValue ¶

SearchSearchItemTriggerABusBItemFlexray ¶

condition property ¶

cyclecount property ¶

data property ¶

eoftype property ¶

errtype property ¶

frameid property ¶

frametype property ¶

header property ¶

SearchSearchItemTriggerABusBItemFlexrayCondition ¶

SearchSearchItemTriggerABusBItemFlexrayCyclecount ¶

hivalue property ¶

qualifier property ¶

value property ¶

SearchSearchItemTriggerABusBItemFlexrayCyclecountHivalue ¶

SearchSearchItemTriggerABusBItemFlexrayCyclecountQualifier ¶

search `property` ¶

copy `property` ¶

state `property` ¶

total `property` ¶

trigger `property` ¶

a `property` ¶

bus `property` ¶

edge `property` ¶

level `property` ¶

logic `property` ¶

lowerthreshold `property` ¶

pulsewidth `property` ¶

risefall `property` ¶

runt `property` ¶

sethold `property` ¶

transition `property` ¶

type `property` ¶

upperthreshold `property` ¶

b `property` ¶

source `property` ¶

can `property` ¶

flexray `property` ¶

i2c `property` ¶

lin `property` ¶

parallel `property` ¶

rs232c `property` ¶

spi `property` ¶

address `property` ¶

condition `property` ¶

data `property` ¶

frametype `property` ¶

identifier `property` ¶

mode `property` ¶

value `property` ¶

direction `property` ¶

qualifier `property` ¶

size `property` ¶

value `property` ¶

mode `property` ¶

value `property` ¶

condition `property` ¶

cyclecount `property` ¶

data `property` ¶

eoftype `property` ¶

errtype `property` ¶

frameid `property` ¶

frametype `property` ¶

header `property` ¶

hivalue `property` ¶

qualifier `property` ¶

value `property` ¶

hivalue `property` ¶

offset `property` ¶

qualifier `property` ¶

size `property` ¶

value `property` ¶

hivalue `property` ¶

qualifier `property` ¶

value `property` ¶

crc `property` ¶

cyclecount `property` ¶

frameid `property` ¶

indbits `property` ¶

paylength `property` ¶

address `property` ¶

condition `property` ¶

data `property` ¶

mode `property` ¶

type `property` ¶

value `property` ¶

direction `property` ¶

size `property` ¶

value `property` ¶

condition `property` ¶

data `property` ¶

errtype `property` ¶

identifier `property` ¶

hivalue `property` ¶

qualifier `property` ¶

size `property` ¶