[python source code]

source4

The source4 commands module.

These commands are used in the following models: AFG3K, AFG3KB, AFG3KC

THIS FILE IS AUTO-GENERATED, IT SHOULD NOT BE MANUALLY MODIFIED.

Please report an issue if one is found.

Commands and Queries 
- SOURce4:POWer:LEVel:IMMediate:AMPLitude {<percent>|MINimum|MAXimum}
- SOURce4:POWer:LEVel:IMMediate:AMPLitude?

Source4

Bases: SCPICmdRead

The SOURce4 command tree.

Usage
  • Using the .query() method will send the SOURce4? query.
  • Using the .verify(value) method will send the SOURce4? query and raise an AssertionError if the returned value does not match value.
Properties
  • .power: The SOURce4:POWer command tree.

power property 

power: Source4Power

Return the SOURce4:POWer command tree.

Usage
  • Using the .query() method will send the SOURce4:POWer? query.
  • Using the .verify(value) method will send the SOURce4:POWer? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .level: The SOURce4:POWer:LEVel command tree.

Source4Power

Bases: SCPICmdRead

The SOURce4:POWer command tree.

Usage
  • Using the .query() method will send the SOURce4:POWer? query.
  • Using the .verify(value) method will send the SOURce4:POWer? query and raise an AssertionError if the returned value does not match value.
Properties
  • .level: The SOURce4:POWer:LEVel command tree.

level property 

level: Source4PowerLevel

Return the SOURce4:POWer:LEVel command tree.

Usage
  • Using the .query() method will send the SOURce4:POWer:LEVel? query.
  • Using the .verify(value) method will send the SOURce4:POWer:LEVel? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .immediate: The SOURce4:POWer:LEVel:IMMediate command tree.

Source4PowerLevel

Bases: SCPICmdRead

The SOURce4:POWer:LEVel command tree.

Usage
  • Using the .query() method will send the SOURce4:POWer:LEVel? query.
  • Using the .verify(value) method will send the SOURce4:POWer:LEVel? query and raise an AssertionError if the returned value does not match value.
Properties
  • .immediate: The SOURce4:POWer:LEVel:IMMediate command tree.

immediate property 

immediate: Source4PowerLevelImmediate

Return the SOURce4:POWer:LEVel:IMMediate command tree.

Usage
  • Using the .query() method will send the SOURce4:POWer:LEVel:IMMediate? query.
  • Using the .verify(value) method will send the SOURce4:POWer:LEVel:IMMediate? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .amplitude: The SOURce4:POWer:LEVel:IMMediate:AMPLitude command.

Source4PowerLevelImmediate

Bases: SCPICmdRead

The SOURce4:POWer:LEVel:IMMediate command tree.

Usage
  • Using the .query() method will send the SOURce4:POWer:LEVel:IMMediate? query.
  • Using the .verify(value) method will send the SOURce4:POWer:LEVel:IMMediate? query and raise an AssertionError if the returned value does not match value.
Properties
  • .amplitude: The SOURce4:POWer:LEVel:IMMediate:AMPLitude command.

amplitude property 

amplitude: Source4PowerLevelImmediateAmplitude

Return the SOURce4:POWer:LEVel:IMMediate:AMPLitude command.

Description
  • This command sets or queries the internal noise level which applies to the output signal for the specified channel. The noise level represents the percent against current amplitude level. The setting range is 0 to 50%. This command is available when Run Mode is set to Continuous, Burst, or Sweep. You can set or query whether to add the internal noise to the output signal using the [SOURce[1|2]]:COMBine:FEED command.
Usage
  • Using the .query() method will send the SOURce4:POWer:LEVel:IMMediate:AMPLitude? query.
  • Using the .verify(value) method will send the SOURce4:POWer:LEVel:IMMediate:AMPLitude? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SOURce4:POWer:LEVel:IMMediate:AMPLitude value command.
SCPI Syntax 
- SOURce4:POWer:LEVel:IMMediate:AMPLitude {<percent>|MINimum|MAXimum}
- SOURce4:POWer:LEVel:IMMediate:AMPLitude?

Source4PowerLevelImmediateAmplitude

Bases: SCPICmdWrite, SCPICmdRead

The SOURce4:POWer:LEVel:IMMediate:AMPLitude command.

Description
  • This command sets or queries the internal noise level which applies to the output signal for the specified channel. The noise level represents the percent against current amplitude level. The setting range is 0 to 50%. This command is available when Run Mode is set to Continuous, Burst, or Sweep. You can set or query whether to add the internal noise to the output signal using the [SOURce[1|2]]:COMBine:FEED command.
Usage
  • Using the .query() method will send the SOURce4:POWer:LEVel:IMMediate:AMPLitude? query.
  • Using the .verify(value) method will send the SOURce4:POWer:LEVel:IMMediate:AMPLitude? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SOURce4:POWer:LEVel:IMMediate:AMPLitude value command.
SCPI Syntax 
- SOURce4:POWer:LEVel:IMMediate:AMPLitude {<percent>|MINimum|MAXimum}
- SOURce4:POWer:LEVel:IMMediate:AMPLitude?