search

The search commands module.

These commands are used in the following models: DPO7AX

THIS FILE IS AUTO-GENERATED, IT SHOULD NOT BE MANUALLY MODIFIED.

Please report an issue if one is found.

Commands and Queries
- SEARCH:ADDNew <QString>
- SEARCH:DELETEALL
- SEARCH:DELete <QString>
- SEARCH:LIST?
- SEARCH:SEARCH<x>:COPy {SEARCHtotrigger|TRIGgertosearch|FROMSearch<x>}
- SEARCH:SEARCH<x>:NAVigate {NEXT|PREVious|MIN|NONE|MAX}
- SEARCH:SEARCH<x>:TOTAL?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:CONDition {SOW|LABel|DATa|LABELANDDATA|EOW|ERRor}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:CONDition?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:DATa:HIVALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:DATa:HIVALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:DATa:QUALifier {EQual|UNEQual|LESSthan|MOREthan|LESSEQual|MOREEQual|INrange|OUTrange}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:DATa:QUALifier?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:DATa:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:DATa:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:ERRTYPe {ANY|PARity|WORD|GAP}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:ERRTYPe?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:LABel:HIVALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:LABel:HIVALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:LABel:QUALifier {EQual|UNEQual|LESSthan|MOREthan|LESSEQual|MOREEQual|INrange|OUTrange}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:LABel:QUALifier?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:LABel:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:LABel:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:SDI:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:SDI:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:SSM:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:SSM:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:CONDition {SOF|DATa}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:CONDition?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:DATa:HITDMVALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:DATa:HITDMVALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:DATa:HIVALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:DATa:HIVALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:DATa:OFFSet <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:DATa:OFFSet?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:DATa:QUALifier {EQual|UNEQual|LESSthan|MOREthan|LESSEQual|MOREEQual|INrange|OUTrange}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:DATa:QUALifier?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:DATa:TDMVALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:DATa:TDMVALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:DATa:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:DATa:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:DATa:WORD {EITher|LEFt|RIGht}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:DATa:WORD?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:CONDition {SSD|SFD|MACADDRess|MACLENgth|IPHeader|TCPHeader|DATa|EOP|FCSError|QTAG}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:CONDition?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:DATa:HIVALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:DATa:HIVALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:DATa:OFFSet <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:DATa:OFFSet?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:DATa:SIZe <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:DATa:SIZe?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:DATa:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:DATa:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:ERRORTYPe {CRC|ESDERR|ESDJAB|CHECKSUM|ANY}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:ERRORTYPe?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:ETHer:HEADer {TCP|ICMP|UDP}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:ETHer:HEADer?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:ETHer:TYPe {IPV4|IPV6}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:ETHer:TYPe?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:IPHeader:DESTinationaddr:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:IPHeader:DESTinationaddr:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:IPHeader:PROTOcol:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:IPHeader:PROTOcol:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:IPHeader:SOUrceaddr:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:IPHeader:SOUrceaddr:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:MAC:ADDRess:DESTination:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:MAC:ADDRess:DESTination:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:MAC:ADDRess:SOUrce:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:MAC:ADDRess:SOUrce:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:MAC:LENgth:HIVALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:MAC:LENgth:HIVALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:MAC:LENgth:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:MAC:LENgth:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:PAYLoad:SIZe <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:PAYLoad:SIZe?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:PAYLoad:VALue <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:PAYLoad:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:QTAG:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:QTAG:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:QUALifier {LESSthan|MOREthan|EQual|UNEQual|LESSEQual|MOREEQual|INrange|OUTrange}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:QUALifier?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:TBT1s:DATa:LENgth SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:TBT1s:DATa: LENgth <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:TBT1s:DATa:LENgth?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:TBT1s:DATa:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:TBT1s:DATa:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:TCPHeader:ACKnum:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:TCPHeader:ACKnum:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:TCPHeader:DESTinationport:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:TCPHeader:DESTinationport:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:TCPHeader:SEQnum:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:TCPHeader:SEQnum:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:TCPHeader:SOUrceport:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:TCPHeader:SOUrceport:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:ADS:TYPe {ADH|DH<x>|DL1}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:ADS:TYPe?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:CONDition {SOF|FRAMEtype|IDentifier|DATa|IDANDDATA|EOF|ERRor|FDBITS}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:CONDition?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:CRCType {PCRC|FCRC}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:CRCType?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DAS:TYPe {DAH|AH<x>|AL1}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DAS:TYPe?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:DIRection {READ|WRITE|NOCARE}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:DIRection?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:OFFSet <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:OFFSet?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:QUALifier {EQual|LESSEQual|MOREEQua|UNEQual|LESSthan|MOREthan}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:QUALifier?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:SIZe <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:SIZe?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:XLBITType {AF|VCID|SDT|SEC|SBC|ADS|DAS}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:XLBITType?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:ERRType {ACKMISS|BITSTUFFing|FORMERRor|xlFormError|CRC|ANYERRor}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:ERRType?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:FD:BRSBit {ONE|ZERo|NOCARE}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:FD:BRSBit?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:FD:ESIBit {ONE|ZERo|NOCARE}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:FD:ESIBit?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:FRAMEtype {DATa|ERRor|OVERLoad|REMote|xldata}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:FRAMEtype?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:IDentifier:MODe {EXTENDed|STandard}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:IDentifier:MODe?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:IDentifier:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:IDentifier:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:PIDentifier:SIZe <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:PIDentifier:SIZe?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:PIDentifier:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:PIDentifier:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:XLDATa:SIZe <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:XLDATa:SIZe?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:XLDATa:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:XLDATa:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:BLUe:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:BLUe:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:CONDition {SOT|EOT|DATa|EOTPDATa|OPTIONALPARam|SCRambling|COMPression|PACKets|BUSTURNAROUnd|ESCAPEMODe|STop|ERRors|MODe|WORD|SYMBol}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:CONDition?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:DATa:SIZe <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:DATa:SIZe?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:DATa:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:DATa:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:ERRor:TYPe {ANY|ECC|CRC}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:ERRor:TYPe?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:ESCAPEMODe:COMMand {LPDT|ULPS|RESETTRIGger|ANY}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:ESCAPEMODe:COMMand?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:GREen:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:GREen:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:MODe:TYPe {HS|LP}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:MODe:TYPe?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:PACKets:LIST {VSYNCSTART|VSYNCEND|HSYNCSTART|HSYNCEND|EOTP|COLOROFF|COLORON|SHUTDOWN|TURNON|GSW|GR|COMPRESSION|SCRAMBLING|EXECUTEQUEue|DCSSW|DCSR|GLONGWRITE|DSINULL|DSIBLANk|MAXRETSIZE|DCSGLONGWRITE|PICPARameter|COMPRESSEDPSTReam|PPS101010|PPS121212|PPS565|PPS666|LPS666|PPS888|YCBCR24|LPYCBCR24|YCBCR16|YCBCR12|ACKNowledge|ERRORREPort|GSRR|GLONGREAD|DCSLONGREAD|DCSSRR|FRAMESTARt|FRAMEEND|LINESTARt|LINEEND|GSP|CSINULL|CSIBLANk|EMBEDDED|USEREIGHTB|RGB565|RGB555|RGB444|RGB666|RAW6|RAW7|RAW8|RAW10|RAW12|RAW14|RAW16|RAW20|RGB888|YUV420L8|YUV8BIT|YUV422B10|YUV420B10}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:PACKets:LIST?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:PACKets:TYPe {SHORt|LONG}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:PACKets:TYPe?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:PIXel:NUMBer <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:PIXel:NUMBer?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:PIXel:SEARCHOPTion {PIXELVALue|PIXELNUMBer}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:PIXel:SEARCHOPTion?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:RED:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:RED:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:SYMBol:SIZe <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:SYMBol:SIZe?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:SYMBol:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:SYMBol:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:WORD:SIZe <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:WORD:SIZe?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:WORD:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:WORD:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:WORDCOUNt:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:WORDCOUNt:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:YCBCR:CB <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:YCBCR:CB?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:YCBCR:CR <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:YCBCR:CR?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:YCBCR:Y <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:YCBCR:Y?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:YUV:U <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:YUV:U?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:YUV:V <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:YUV:V?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:YUV:Y <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:YUV:Y?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:CONDition {STARt|FRAMes|FRAMEID|PTYPe|DLC|EXTDLC|NETMN|COUNter|DATa|ERRors}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:CONDition?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:COUNter:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:COUNter:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:DATa:SIZe <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:DATa:SIZe?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:DATa:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:DATa:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:DLC:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:DLC:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:ERROR:TYPe {CRC|PARity|FRAMe|IBS|ANY}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:ERROR:TYPe?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:EXTDLC:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:EXTDLC:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:FRAMEID:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:FRAMEID:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:FRAMe:TYPe {NORMal|SLEep|LONG|POLLINGNORMal|POLLINGLONG}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:FRAMe:TYPe?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:NETMN:SLEEPIND {ON|OFF|EITHer}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:NETMN:SLEEPIND?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:NETMN:WAKEUPIND {ON|OFF|EITHer}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:NETMN:WAKEUPIND?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:BLUe:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:BLUe:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:CONDition {SOT|EOT|DATa|EOTPDATa|OPTIONALPARam|SCRambling|COMPression|PACKets|BUSTURNAROUnd|ESCAPEMODe|STop|ERRors|MODe}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:CONDition?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:DATa:SIZe <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:DATa:SIZe?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:DATa:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:DATa:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:ERRor:TYPe {ANY|ECC|CRC}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:ERRor:TYPe?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:ESCAPEMODe:COMMand {LPDT|ULPS|RESETTRIGger|ANY}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:ESCAPEMODe:COMMand?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:GREen:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:GREen:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:MODe:TYPe {HS|LP}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:MODe:TYPe?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:PACKets:LIST {VSYNCSTART|VSYNCEND|HSYNCSTART|HSYNCEND|EOTP|COLOROFF|COLORON|SHUTDOWN|TURNON|GSW|GR|COMPRESSION|SCRAMBLING|EXECUTEQUEue|DCSSW|DCSR|GLONGWRITE|DSINULL|DSIBLANk|MAXRETSIZE|DCSGLONGWRITE|PICPARameter|COMPRESSEDPSTReam|PPS101010|PPS121212|PPS565|PPS666|LPS666|PPS888|YCBCR24|LPYCBCR24|YCBCR16|YCBCR12|ACKNowledge|ERRORREPort|GSRR|GLONGREAD|DCSLONGREAD|DCSSRR|FRAMESTARt|FRAMEEND|LINESTARt|LINEEND|GSP|CSINULL|CSIBLANk|EMBEDDED|USEREIGHTB|RGB565|RGB555|RGB444|RGB666|RAW6|RAW7|RAW8|RAW10|RAW12|RAW14|RAW16|RAW20|RGB888|YUV420L8|YUV8BIT|YUV422B10|YUV420B10}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:PACKets:LIST?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:PACKets:TYPe {SHORt|LONG}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:PACKets:TYPe?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:PIXel:NUMBer <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:PIXel:NUMBer?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:PIXel:SEARCHOPTion {PIXELVALue|PIXELNUMBer}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:PIXel:SEARCHOPTion?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:RED:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:RED:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:WORDCOUNt:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:WORDCOUNt:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:YCBCR:CB <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:YCBCR:CB?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:YCBCR:CR <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:YCBCR:CR?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:YCBCR:Y <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:YCBCR:Y?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:YUV:U <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:YUV:U?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:YUV:V <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:YUV:V?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:YUV:Y <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:YUV:Y?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:ADDRess:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:ADDRess:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:COMMAND:OPCode {GETSTATus|GETCONFig|SETCONFig|GETNP|GETPC|PUTNP|PUTPC|PUTIORDSHORt|PUTIOWRSHORt|PUTMEMRD32SHORt|PUTMEMWR32SHORt|PUTOOB|GETOOB|PUTFLASHC|GETFLASHNP|PUTVWIRe|GETVWIRe}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:COMMAND:OPCode?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:CONDition {STARt|CHINDependent|PERICHANnel|OOBCHANnel|VWCHANnel|FACHANnel|DATa|STATus|ERRors|WAIT|END}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:CONDition?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:CYCLETYPe {MEMRD32|MEMRD64|MEMWR32|MEMWR64|MESSage|MSGWITHDATa|SUCCESSNODATa|SUCCESSDATa|UNSUCCESSNODATa|OOBSMBUS|MCTP|FLASHREAD|FLASHWRITe|FLASHERASe|FLSUCCESSNODATa|FLSUCCESSDATa|FLUNSUCCESSNODATa}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:CYCLETYPe?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:DATa:SIZe <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:DATa:SIZe?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:DATa:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:DATa:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:ERRor:TYPe {CRC|DEFer|FATal|NONFATal|NORESPonse|CMDOPCODe|CYCLETYPe}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:ERRor:TYPe?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:LENGth:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:LENGth:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:PHASe {COMMand|RESPONSE|RESPONSEHEADer|RESPONSENOHEADer}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:PHASe?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:RESPCYCLE:TYPe {MEMRDWR32|MEMRDWR64|MESSage|MSGWITHDATa|SUCCESSNODATa|SUCCESSDATa|UNSUCCESSNODATa|LTR|FLASHREAD|FLASHWRITe|FLASHERASe}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:RESPCYCLE:TYPe?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:SMBUS:DESTination:ADDRess <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:SMBUS:DESTination:ADDRess?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:SMBUS:SLAVe:ADDRess <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:SMBUS:SLAVe:ADDRess?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:TAG:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:TAG:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:VIRTUALWIRe:COUNt:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:VIRTUALWIRe:COUNt:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:VIRTUALWIRe:DATa:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:VIRTUALWIRe:DATa:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:VIRTUALWIRe:INDex:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:VIRTUALWIRe:INDex:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:VIRTUALWIRe:RESPonse:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:VIRTUALWIRe:RESPonse:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:VIRTUALWIRe:STATus:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:VIRTUALWIRe:STATus:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:ADDRESSMODe {DEVice|LOGical}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:ADDRESSMODe?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:CNTNV:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:CNTNV:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:COMMANDTYPe {NOP|APRD|APWR|APRW|FPRD|FPWR|FPRW|BRD|BWR|BRW|LRD|LWR|LRW|ARMW|FRMW|REServed}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:COMMANDTYPe?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:CONDition {SOF|PROTocol|IPHEADer|UDPIPHEADer|MACADDRess|TCI|ECATHEADERLENGth|DATagram|NETWORKVARiable|MAILBOX|FCSERRor|EOF}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:CONDition?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:CYC:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:CYC:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:DATAGRAM {HEADer|DATa|WKC}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:DATAGRAM?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:DATAGRAMHEADer {CMD|IDX|ADDRess|LEN|CIRCulating|IRQ}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:DATAGRAMHEADer:LENGth <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:DATAGRAMHEADer:LENGth?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:DATAGRAMHEADer?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:DATa:SIZe <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:DATa:SIZe?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:DATa:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:DATa:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:DESTINATIONADDRess:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:DESTINATIONADDRess:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:DEVICEADDRess {POSition|OFFSet}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:DEVICEADDRess?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:ERRor:REPLy:SERVice:DATa {TYPe|DETail}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:ERRor:REPLy:SERVice:DATa?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:FRAMETYPe {BASic|UDPIP}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:FRAMETYPe?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:HASH:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:HASH:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:HEADer:LENGth <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:HEADer:LENGth?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:IDENtification:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:IDENtification:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:IDX:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:IDX:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:INDex:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:INDex:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:IPDESTination:ADDRess:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:IPDESTination:ADDRess:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:IPSOURce:ADDRess:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:IPSOURce:ADDRess:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:IRQ:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:IRQ:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:LEN:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:LEN:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:LOGICALADDRess:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:LOGICALADDRess:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:MAILBOXTYPe {ZERo|ONE|TWO|THRee|FOUR|FIVe|RESERved|FIFTeen}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:MAILBOXTYPe?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:MAILbox {MAILBOXHEADer|SERVICEDATa|ERRSERVICEDATa}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:MAILbox:ADDRess:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:MAILbox:ADDRess:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:MAILbox:CNT:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:MAILbox:CNT:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:MAILbox:DETail {ONE|TWO|THRee|FOUR|FIVe|SIX|SEVEn|EIGHt|NINe}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:MAILbox:DETail?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:MAILbox:HEADer {LENGth|ADDRess|CHANnel|PRIority|TYPe|CNT}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:MAILbox:HEADer?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:MAILbox?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:NETWORKVARiable:DATa:SIZe <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:NETWORKVARiable:DATa:SIZe?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:NETWORKVARiable:DATa:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:NETWORKVARiable:DATa:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:NETWork:VARiable {PUBHEADer|NVHEADer|NVDATa}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:NETWork:VARiable:HEADer {INDex|HASH|NVLEN|Q}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:NETWork:VARiable:HEADer?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:NETWork:VARiable?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:OFFSet:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:OFFSet:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:POSition:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:POSition:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:PROTOCOLTYPe {PDU|NETWORKVARiables|MAILbox}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:PROTOCOLTYPe?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:PUBID:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:PUBID:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:QUALity:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:QUALity:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:SERVice:DATa:LENGth <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:SERVice:DATa:LENGth?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:SERVice:DATa:SIZe <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:SERVice:DATa:SIZe?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:SERVice:DATa:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:SERVice:DATa:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:SOURCEADDRess:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:SOURCEADDRess:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:SRC:PORT:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:SRC:PORT:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:TCI:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:TCI:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:WKC:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:WKC:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:CONDition {SFD|MACADDRess|MACLENgth|IPHeader|TCPHeader|DATa|EOP|IDLe|FCSError|QTAG}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:CONDition?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:DATa:HIVALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:DATa:HIVALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:DATa:OFFSet <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:DATa:OFFSet?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:DATa:QUALifier {LESSthan|MOREthan|EQual|UNEQual|LESSEQual|MOREEQual|INrange|OUTrange}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:DATa:QUALifier?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:DATa:SIZe <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:DATa:SIZe?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:DATa:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:DATa:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:IPHeader:DESTinationaddr:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:IPHeader:DESTinationaddr:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:IPHeader:PROTOcol:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:IPHeader:PROTOcol:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:IPHeader:SOUrceaddr:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:IPHeader:SOUrceaddr:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:ADDRess:DESTination:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:ADDRess:DESTination:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:ADDRess:SOUrce:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:ADDRess:SOUrce:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:LENgth:HIVALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:LENgth:HIVALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:LENgth:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:LENgth:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:QTAG:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:QTAG:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:ACKnum:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:ACKnum:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:DESTinationport:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:DESTinationport:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:SEQnum:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:SEQnum:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:SOUrceport:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:SOUrceport:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:ADDress:HIVALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:ADDress:HIVALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:ADDress:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:ADDress:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:CONDition {SYNC|HANDSHAKEPacket|SPECIALPacket|ERRor|TOKENPacket|DATAPacket|RESET|CONNect|CONTROLMESSage|SUSPEND|DEVICEChirp|HOSTChirp|PORTReset|PORTConfiguration|RESUME|RAP|EOP}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:CONDition?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:DATABITS:SIZe <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:DATABITS:SIZe?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:DATa:HIVALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:DATa:HIVALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:DATa:OFFSet <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:DATa:OFFSet?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:DATa:QUAlifier {EQual|UNEQual|LESSthan|MOREthan|LESSEQual|MOREEQual|Inrange|OUTrange}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:DATa:QUAlifier?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:DATa:SIZe <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:DATa:SIZe?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:DATa:TYPe {ANY|DATA<x>|MDATA}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:DATa:TYPe?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:DATa:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:DATa:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:ENDPoint:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:ENDPoint:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:ENDSEARch {OFF|ON}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:ENDSEARch?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:EOP:DATABITS:SIZe <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:EOP:DATABITS:SIZe?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:EOP:QUAlifier {EQual|UNEQual|LESSthan|MOREthan|LESSEQual|MOREEQual|INrange|OUTrange}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:EOP:QUAlifier?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:EOPBITS:MAX:SIZe <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:EOPBITS:MAX:SIZe?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:EOPBITS:MIN:SIZe <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:EOPBITS:MIN:SIZe?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:ERRType {BITSTUFFing|CRC5|CRC16|PID}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:ERRType?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:HANDSHAKEType {ANY|ACK|NAK|STALL|NYET}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:HANDSHAKEType?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:RAP:ADDress:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:RAP:ADDress:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:RAP:COMMand {ALL|WRITe|READ|CLEar|SET}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:RAP:COMMand?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:RAP:DATa:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:RAP:DATa:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:RAP:OPTion {COMMand|ADDRess|RAPDATa}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:RAP:OPTion?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SOFFRAMENUMber <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SOFFRAMENUMber?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPECIALType {ANY|PREamble|ERROr|SPLit|PING|RESERVed}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPECIALType?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPLit:ET:VALue {NOCARE|CONTRol|ISOchronous|BULK|INTERRUPT}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPLit:ET:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPLit:HUB:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPLit:HUB:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPLit:PORT:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPLit:PORT:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPLit:SC:VALue {NOCARE|SSPLIT|CSPLIT}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPLit:SC:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPLit:SE:VALue {NOCARE|FULLSPEED|LOWSPEED|ISOSTART|ISOMID|ISOEND|ISOALL}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPLit:SE:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SYNC:QUAlifier {EQual|UNEQual|LESSthan|MOREthan|LESSEQual|MOREEQual|INrange|OUTrange}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SYNC:QUAlifier?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SYNCBITS:MAX:SIZe <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SYNCBITS:MAX:SIZe?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SYNCBITS:MIN:SIZe <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SYNCBITS:MIN:SIZe?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SYNCSEARch {OFF|ON}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SYNCSEARch?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:TOKENType {ANY|SOF|OUT|IN|SETUP}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:TOKENType?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:CONDition {SOF|FRAMEType|IDentifier|CYCLEcount|HEADer|DATA|IDANDDATA|EOF|ERRor}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:CONDition?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:CYCLEcount:HIVALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:CYCLEcount:HIVALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:CYCLEcount:QUALifier {EQual|LESSEQual|MOREEQual|UNEQual|LESSthan|MOREthan|INrange|OUTrange}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:CYCLEcount:QUALifier?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:CYCLEcount:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:CYCLEcount:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:DATa:HIVALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:DATa:HIVALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:DATa:OFFSet <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:DATa:OFFSet?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:DATa:QUALifier {EQual|LESSEQual|MOREEQual|UNEQual|LESSthan|MOREthan|INrange|OUTrange}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:DATa:QUALifier?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:DATa:SIZe <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:DATa:SIZe?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:DATa:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:DATa:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:EOFTYPE {ANY|STATIC|DYNAMIC}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:EOFTYPE?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:ERRTYPE {CRCHeader|CRCTrailer|NULLFRStatic|NULLFRDynamic|SYNCFrame|STARTupnosync}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:ERRTYPE?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:FRAMEID:HIVALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:FRAMEID:HIVALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:FRAMEID:QUALifier {EQual|UNEQual|LESSthan|MOREthan|LESSEQual|MOREEQual|INrange|OUTrange}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:FRAMEID:QUALifier?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:FRAMEID:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:FRAMEID:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:FRAMEType {NORMal|PAYload|NULL|SYNC|STARTup}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:FRAMEType?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:HEADER:CRC <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:HEADER:CRC?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:HEADER:CYCLECount <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:HEADER:CYCLECount?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:HEADER:FRAMEID <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:HEADER:FRAMEID?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:HEADER:INDBits <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:HEADER:INDBits?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:HEADER:PAYLENgth <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:HEADER:PAYLENgth?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:ADDRess:MODe {ADDR10|ADDR7}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:ADDRess:MODe?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:ADDRess:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:ADDRess:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:CONDition {ADDRess|ADDRANDDATA|DATa|ACKMISS|REPEATstart|STARt|STOP}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:CONDition?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:DATa:DIRection {NOCARE|READ|WRITE}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:DATa:DIRection?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:DATa:SIZe <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:DATa:SIZe?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:DATa:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:DATa:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:ADDRess:MODe {ADDR10|ADDR7}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:ADDRess:MODe?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:ADDRess:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:ADDRess:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:BCR:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:BCR:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:BCRType:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:BCRType:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:BPACKets {RESPonse|BROadcast}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:BPACKets?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:BRGTID:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:BRGTID:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:CCODe:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:CCODe:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:CONDition {STARt|REPEATStart|ADDRess|DATa|SDRDirect|SDRBroadcast|ERRors|HOTJoin|DMSGEnd|BMSGEnd|HDRRestart|HDRExit}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:CONDition?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:DATa:DIRection {NOCARE|READ|WRITE}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:DATa:DIRection?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:DATa:SIZe <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:DATa:SIZe?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:DATa:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:DATa:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:DCR:VALue <QString
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:DCR:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:DCRType:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:DCRType:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:DWORd:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:DWORd:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:ERRORTYPe {NACK|TBIT|PARity|BADDr|DADDr|PREamble|CRC}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:ERRORTYPe?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:EVENTBYTe:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:EVENTBYTe:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:FREQBYTe:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:FREQBYTe:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:GSLSb:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:GSLSb:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:GSMSb:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:GSMSb:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:ID:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:ID:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:INACCBYTe:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:INACCBYTe:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:MAXREAD:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:MAXREAD:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:MAXRTURN:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:MAXRTURN:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:MAXWRITe:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:MAXWRITe:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:PACKets {RESPonse|DIRect}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:PACKets?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:SADDress:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:SADDress:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:SDR:BROADCASTPacket {ENSLave|DISLave|ENTasx|RSTDya|ENTRDya|SETMwrl|SETMrdl|LSLave|ENTRTSTMode|EXTime|SETaasa|ENDXFER|SETGRPa|RSTACT|DEFGRPa|RSTGRPa|MLANe|SETBUSCON}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:SDR:BROADCASTPacket?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:SDR:DIRECTPacket {ENSLave|DISLave|ENTasx|RSTDya|SETMwrl|SETMrdl|SEText|SETDya|SETNdya|GETMWrl|GETMRdl|GETPrid|GETBusch|GETDevch|GETSlave|ACCM|SETBrt|MDATASpeed|HDRCapability|GETXTime|GETCAPS|ENDXFER|SETGRPa|RSTACT|DEFGRPa|RSTGRPa|MLANe}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:SDR:DIRECTPacket?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:STATEBYTe:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:STATEBYTe:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:STATic:ADDRess <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:STATic:ADDRess?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:SUPPORTBYTe:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:SUPPORTBYTe:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:TESTMODe:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:TESTMODe:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:CONDition {DATA|IDANDDATA|ERRor|IDentifier|SLEEP|SYNCfield|WAKEup}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:CONDition?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa:HIVALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa:HIVALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa:QUALifier {EQual|LESSEQual|MOREEQual|UNEQual|LESSthan|MOREthan|INrange|OUTrange}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa:QUALifier?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa:SIZe <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa:SIZe?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:ERRTYPE {CHecksum|PARity|SYNC}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:ERRTYPE?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:IDentifier:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:IDentifier:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:CONDition {SYNCBITS|HEADer|DATa|packetOffData|TRAiler|ERRors}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:CONDition?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:DATa:SIZe <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:DATa:SIZe?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:DATa:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:DATa:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:ERRor:TYPe {MANChester|PARity}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:ERRor:TYPe?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:HEADER:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:HEADER:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:SYNC:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:SYNC:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:TRAILER:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:TRAILER:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:packetOffData:VALue <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:packetOffData:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:ADDress:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:ADDress:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:CONDition {STARTPACKet|PHYSICALADDRess|REGISTERADDRess|DEVICETYPe|DATA|ADDRess|ERRor}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:CONDition?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:DATa:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:DATa:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:DEVicetype:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:DEVicetype:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:ERRType {OPCODEERRor|DEVERRor|ANY}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:ERRType?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:OPCode:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:OPCode:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:PHYSicaladdress:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:PHYSicaladdress:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:REGisteraddress:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:REGisteraddress:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:ADDRess:HIVALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:ADDRess:HIVALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:ADDRess:QUALifier {EQual|UNEQual|LESSthan|MOREthan|LESSEQual|MOREEQual|INrange|OUTrange}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:ADDRess:QUALifier?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:ADDRess:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:ADDRess:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:COUNt <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:COUNt?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:PARity {ONE|ZERo|NOCARE}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:PARity?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:SUBADdress <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:SUBADdress?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:TRBit {RX|TX|X}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:TRBit?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:CONDition {SYNC|COMMAND|STATus|DATA|ERRor}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:CONDition?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:DATa:PARity {ONE|ZERo|NOCARE}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:DATa:PARity?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:DATa:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:DATa:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:ERRTYPe {PARity|SYNC|DATA}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:ERRTYPe?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:ADDRess:HIVALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:ADDRess:HIVALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:ADDRess:QUALifier {EQual|UNEQual|LESSthan|MOREthan|LESSEQual|MOREEQual|INrange|OUTrange}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:ADDRess:QUALifier?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:ADDRess:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:ADDRess:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:BIT:BCR {ONE|ZERo|NOCARE}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:BIT:BCR?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:BIT:BUSY {ONE|ZERo|NOCARE}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:BIT:BUSY?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:BIT:DBCA {ONE|ZERo|NOCARE}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:BIT:DBCA?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:BIT:INSTR {ONE|ZERo|NOCARE}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:BIT:INSTR?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:BIT:ME {ONE|ZERo|NOCARE}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:BIT:ME?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:BIT:SRQ {ONE|ZERo|NOCARE}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:BIT:SRQ?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:BIT:SUBSF {ONE|ZERo|NOCARE}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:BIT:SUBSF?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:BIT:TF {ONE|ZERo|NOCARE}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:BIT:TF?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:PARity {ONE|ZERo|NOCARE}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:PARity?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:NFC:COMMand:CODe {INVentory|STAYQUIet|RFU|RDSBLOCk|WRSBLOCk|LOCKBLOCk|RDMBLOCk|WRMBLOCk|SELECT15693SET|RSTTOREADy|WRITEAFI|LOCKAFI|WRITEDSFID|LOCKDSFID|GETSYSTEMINFo|GETMBSECSYSTem|FRDMBLOCk|EXRDSBLOCk|EXWRSBLOCk|EXLOCKBLOCk|EXRDMBLOCk|AUTHenticate|KEYUPDate|AUTHCRYPto|SECURECRYPto|CHALlenge|READBUFFer|EXGETSYSTINFo|EXGETMBSSTATus|FEXRDMBLOCks|custom|REQa|WUPa|PROPrietary|SELECT14443A|HLTa|REQB|WUPB|SLOTMARKER|ATTRIB|HLTB|ANY|ATRReq|WUPReq|PSLReq|DEPReq|DSLReq|RLSReq}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:NFC:COMMand:CODe?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:NFC:CONDition {SOC|SOS|SYNC|CMDCODe|EOC|ERRors|SOF|AFI|PUPi|IDEntifier|UID|EOF|PAYLoad|DATa|RESPCODe|EOS}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:NFC:CONDition?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:NFC:DATa:SIZe <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:NFC:DATa:SIZe?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:NFC:DATa:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:NFC:DATa:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:NFC:ERRor:TYPe {ANY|PARity|CRC}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:NFC:ERRor:TYPe?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:NFC:PAYLOADBITS {EIGHTBIT|SIXTYFOURBIT}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:NFC:PAYLOADBITS?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:NFC:RESPonse:CODe {SAK|ATQA|ATQBPROP|ATQBCOMP|HLTB|ANY|ATRRes|WUPRes|PSLRes|DEPRes|DSLRes|RLSRes}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:NFC:RESPonse:CODe?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:NFC:TYPe {COMMand|RESPonse}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:NFC:TYPe?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:NFC:UID:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:NFC:UID:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:NRZ:CONDition {DATa}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:NRZ:CONDition?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:NRZ:DATa:SIZe <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:NRZ:DATa:SIZe?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:NRZ:DATa:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:NRZ:DATa:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:COMMand:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:COMMand:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:CONDition {RESet|PREsence|COMMand|DATa|READROM|MATCHROM|OVERDRIVEMATCh|SKIPROM|OVERDRIVESKIP|SEARCHROM|ALARMSEARch|CRCERRor}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:CONDition?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:DATa:SIZe <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:DATa:SIZe?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:DATa:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:DATa:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:MATCHROM:FAMILYCODe <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:MATCHROM:FAMILYCODe?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:MATCHROM:SERIALNUMBer <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:MATCHROM:SERIALNUMBer?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:OVERDRIVe:FAMILYCODe <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:OVERDRIVe:FAMILYCODe?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:OVERDRIVe:SERIALNUMBer <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:OVERDRIVe:SERIALNUMBer?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:READROM:FAMILYCODe <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:READROM:FAMILYCODe?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:READROM:SERIALNUMBer <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:READROM:SERIALNUMBer?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:SEARCHROM:ROMCODe <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:SEARCHROM:ROMCODe?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PARallel:DATa:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PARallel:DATa:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:CHEADer {CONTROL|DATA|EITHER}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:CHEADer?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:CUSTom:DHEAder <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:CUSTom:DHEAder?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:CUSTom:NSYMbols <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:CUSTom:NSYMbols?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:DLLP:DCRedits:VALue <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:DLLP:DCRedits:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:DLLP:HCRedits:VALue <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:DLLP:HCRedits:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:DLLP:VCHANnel:VALue <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:DLLP:VCHANnel:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:OSETtype {TS<x>|EIOS|EIEOS|FTS|SDS|SKP}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:OSETtype?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:SYNC {ORDSET|DATA|INVALID}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:SYNC?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:TLP:ADDRess:MODe {ADDR32|ADDR64}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:TLP:ADDRess:MODe?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:TLP:AHIGh <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:TLP:AHIGh?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:TLP:ALOW <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:TLP:ALOW?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:TLP:AOTYpe {ANY|FADD|SWAP|CAS}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:TLP:AOTYpe?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:TLP:BNUMber <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:TLP:BNUMber?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:TLP:DIRection {EITHER|READ|WRITE}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:TLP:DIRection?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:TLP:MCODe <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:TLP:MCODe?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:TLP:PREFix <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:TLP:PREFix?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:TLP:PTYPe {ANY|LOCAL|ENEND}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:TLP:PTYPe?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:TLP:RID <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:TLP:RID?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:TLP:SNUMber <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:TLP:SNUMber?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:TLP:STAG <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:TLP:STAG?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:TLP:TYPe {ANY|MEMORY|IO|CONFIG|MESSAGE|COMPLETION|AOPERATION|PREFIX}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:TLP:TYPe?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:BLOCKDATa:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:BLOCKDATa:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:CONDition {STARt|STATus|DATa|BLOCkid|ERRors|STARTBIT|FUNCTIONCODe|ECUDATa|SENSORADDRess|REGISTERADDRess|SENSORSTATus|CRCERRor}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:CONDition?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:DATABITs {FOURBIT|EIGHTBIT|TWENTYBIT}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:DATABITs?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:DATa:ECU:SENSor:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:DATa:ECU:SENSor:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:DATa:REGion:A:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:DATa:REGion:A:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:DATa:REGion:B:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:DATa:REGion:B:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:ERRORTYPe {ANY|PARity|CRC|RESPONSECODe}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:ERRORTYPe?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:FUNCTIONCODETYPe <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:FUNCTIONCODETYPe?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:REGISTERADDRess {TWOBIT|SIXBIT|EIGHTBIT}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:REGISTERADDRess?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:REGister:ADDRess:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:REGister:ADDRess:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:SENSORSTATus:TYPe {READy|BUSY|DEFect|SERVICEMODe|UNLocked}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:SENSORSTATus:TYPe?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:SENSor:ADDRess:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:SENSor:ADDRess:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:STATus:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:STATus:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:RS232C:CONDition {DATa|EOp|PARItyerror|STARt}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:RS232C:CONDition?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:RS232C:DATa:SIZe <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:RS232C:DATa:SIZe?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:RS232C:DATa:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:RS232C:DATa:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:CONDition {SYMbols|ERRors}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:CONDition?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:DISParity {POSITIVe|NEGAtive|EITHer}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:DISParity?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:ERRor {SYMBol|DISParity}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:ERRor?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:SYMbol:CSYMVALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:SYMbol:CSYMVALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:SYMbol:EBITVALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:SYMbol:EBITVALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:SYMbol:MODe {EBIT|TBIT|SYMB}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:SYMbol:MODe?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:SYMbol:TBITRDNeg <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:SYMbol:TBITRDNeg?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:SYMbol:TBITRDPos <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:SYMbol:TBITRDPos?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:SYMbol:TBITVALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:SYMbol:TBITVALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:SYMbol:TYPe {DATa|CONTrol}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:SYMbol:TYPe?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:ADDRess:TYPe {BROadcast|NOSTATion|STATIONADDr}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:ADDRess:TYPe?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:CONDition {STARt|DATa|ABORt|ADDRess|UNNumbered|INFormation|SUPervisory|ERRors|END}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:CONDition?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:DATa:SIZe <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:DATa:SIZe?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:DATa:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:DATa:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:ERROR:TYPe {FCS|NUMERICORDer}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:ERROR:TYPe?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:FRAMe:TYPe {COMMand|RESPonse|BOTH}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:FRAMe:TYPe?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:STADDress:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:STADDress:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:SUPervisory:FRAMETYPe {RR|RNR|REJ}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:SUPervisory:FRAMETYPe?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:UNNumbered:FRAMETYPe {UP|UI|SNRM|SNRME|REQDISConnect|UACK|REQSETINIT|DISCMODe|FRAMEREJ|TEST|XID|CONFigure|BEACon}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:UNNumbered:FRAMETYPe?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:CONDition {START|FAST|SLOW|PAUSE|ERRor}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:CONDition?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:ERRType {FRAMELENgth|CRC}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:ERRType:CRC {FAST|SLOW}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:ERRType:CRC?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:ERRType?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN1A:HIVALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN1A:HIVALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN1A:QUALifier {EQual|UNEQual|LESSthan|MOREthan|LESSEQual|MOREEQual|INrange|OUTrange}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN1A:QUALifier?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN1A:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN1A:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN2B:HIVALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN2B:HIVALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN2B:QUALifier {EQual|UNEQual|LESSthan|MOREthan|LESSEQual|MOREEQual|INrange|OUTrange}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN2B:QUALifier?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN2B:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN2B:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:COUNTer:HIVALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:COUNTer:HIVALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:COUNTer:QUALifier {EQual|UNEQual|LESSthan|MOREthan|LESSEQual|MOREEQual|INrange|OUTrange}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:COUNTer:QUALifier?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:COUNTer:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:COUNTer:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:INVERTNIBble:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:INVERTNIBble:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:STATus:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:STATus:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:PAUSE:QUALifier {EQual|UNEQual|LESSthan|MOREthan|LESSEQual|MOREEQual|INrange|OUTrange}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:PAUSE:QUALifier?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:PAUSE:TICKs:HIVALue <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:PAUSE:TICKs:HIVALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:PAUSE:TICKs:VALue <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:PAUSE:TICKs:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:SLOW:DATA:HIVALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:SLOW:DATA:HIVALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:SLOW:DATA:QUALifier {EQual|UNEQual|LESSthan|MOREthan|LESSEQual|MOREEQualINrange|OUTrange}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:SLOW:DATA:QUALifier?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:SLOW:DATA:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:SLOW:DATA:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:SLOW:IDentifier:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:SLOW:IDentifier:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:ADDRess:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:ADDRess:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:COMMand:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:COMMand:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:CONDition {STARt|REPEATSTARt|ADDRess|HOSTADDR|DEVICEADDR|COMMand|DATa|UDIDDATa|ERRor|STOP|IDLe}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:CONDition?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:DATa:SIZe <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:DATa:SIZe?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:DATa:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:DATa:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:DEVICEADDR:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:DEVICEADDR:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:ERROr:TYPe {ANY|ACK|NACK|PEC}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:ERROr:TYPe?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:FIELDBYTe {ONE|TWO|FOUR}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:FIELDBYTe?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:UDIDDATa:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:UDIDDATa:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SOUrce B<x>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SOUrce?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SPACEWIRe:CONDition {SYNC|DATa|ERRors|CONTROLCODe|CONTROLCHAR}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SPACEWIRe:CONDition?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SPACEWIRe:CONTROLCHARTYPe {FCT|ESC|ENDOFPACKet}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SPACEWIRe:CONTROLCHARTYPe?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SPACEWIRe:CONTROLCODETYPe {NULL|TIMECODe}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SPACEWIRe:CONTROLCODETYPe?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SPACEWIRe:DATa:SIZe <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SPACEWIRe:DATa:SIZe?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SPACEWIRe:DATa:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SPACEWIRe:DATa:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SPACEWIRe:ERRORTYPe {EEP|ESC|PARity}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SPACEWIRe:ERRORTYPe?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SPACEWIRe:TIMECode:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SPACEWIRe:TIMECode:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:CONDition {DATA|SS|STARTofframe}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:CONDition?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:DATa:SIZe <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:DATa:SIZe?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:DATa:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:DATa:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:SOURCETYpe {MISo|MOSi}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:SOURCETYpe?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:CONDition {SSC|RESet|SLEep|SHUTdown|WAKeup|MASTERREAd|MASTERWRIte|REGREAd|REGWRIte|DEVICEDESCMASTERREAd|DEVICEDESCSLAVEREAd|EXTREGREAd|EXTREGWRIte|LONGEXTREGREAd|LONGEXTREGWRIte|REG0WRIte|AUTHenticate|TRANSferbusownership|PARItyerror}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:CONDition?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:DATa:SIZe <NR2>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:DATa:SIZe?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:DATa:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:DATa:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:MASTERADDRess:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:MASTERADDRess:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:NORESPonse <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:NORESPonse?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:REGISTERADDRess:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:REGISTERADDRess:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:SLAVEADDRess:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:SLAVEADDRess:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:COMMand:RESPonse {GETReg|GETRegvendor|GETRegtestcfg|SETFast|SETSlow| SETDecay|SETPs|SETRegaddr|SETRegdata|REGAddrvendor|REGDatavendor|REGAddrtestconfg|REGDatatestconfg|TESTmode|SETWp|GETRegpktrecent|GETRegpktalert|GETRegpktbad|GETRegvrevent}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:COMMand:RESPonse?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:COMMand:TYPe {GET|SET|OPTional}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:COMMand:TYPe?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:CONDition {STARTCONDition|SLAVEADDRess|COMMand|PAYLoad|ERRors}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:CONDition?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:ERRor:TYPe {ANY|NACK|REJect|MIXed|PARity}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:ERRor:TYPe?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:PAYLoad:TYPe {MASTer|SLAVe|EITHer}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:PAYLoad:TYPe?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:PAYLoad:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:PAYLoad:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:SLAVE:ADDRESS <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:SLAVE:ADDRESS?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ADDress:HIVALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ADDress:HIVALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ADDress:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ADDress:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:CHARacter {COM|EDB|END|EPF|SDP|SHP|SKP|SLC|SUB|Any}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:CHARacter?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:CHEADer {CONTRol|DATa|EITHer}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:CHEADer?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:COMPliance {CP1|CP3|CP4|CP56|CP78}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:COMPliance?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:CONDition {COMPATTern|CONTROLCH|CUSTom|DATAPacket|EOP|ERRor|HANDSHAKEPacket|OSET|PACKet|RESET|RESUME|SPECIALPacket|SUSPEND|SYNC|TOKENPacket}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:CONDition?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:CRCTYPe {CRC5|CRC16|CRC32}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:CRCTYPe?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:CUSTom:CHARacters <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:CUSTom:CHARacters?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:CUSTom:HEXVALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:CUSTom:HEXVALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:CUSTom:NUMSYMbols <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:CUSTom:NUMSYMbols?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:HIVALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:HIVALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:OFFSet <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:OFFSet?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:QUALifier {EQual|UNEQual|LESSthan|MOREthan|LESSEQual|MOREEQual|INrange|OUTrange}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:QUALifier?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:SIZe <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:SIZe?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:TYPe {ANY|DATA<x>|MDATA}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:TYPe?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ENDPoint:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ENDPoint:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ERR8B10B:TYPe {CHARacter|DISParity}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ERR8B10B:TYPe?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ERRTYPE {BITSTUFFing|CRC5|CRC16|CRCTYPes|ERR8B10B|PID}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ERRTYPE?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:HANDSHAKEType {ACK|ANY|NAK|NYET|STALL}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:HANDSHAKEType?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:HEADERTYPe {CONTRol|DATa|INVALid}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:HEADERTYPe?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:KEYPADTYPe {KCODe|DATa}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:KEYPADTYPe?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:LANE {USB32G1|USB32G2}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:LANE?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ORDered:SET {TSEQ|TS<x>|SKP|DPPSTART|DPPEND|DPPABORT|LCSTART|HPSTART}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ORDered:SET?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:PACKETTYPe {LMP|TP|DP|ITP|ANY}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:PACKETTYPe?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:PACKet:TYPEOFLMP {PORTCAP|PORTCFG|PORTRSP|PRECTM|SETLF|U2IT|VDEVTEST|ANY}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:PACKet:TYPEOFLMP?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:PACKet:TYPEOFTP {ACK|DEVNOTif|ERDY|NRDY|PING|PINGRSP|STATus|STALl|ANY}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:PACKet:TYPEOFTP?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SOFFRAMENUMber <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SOFFRAMENUMber?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPECIALType {ANY|ERROr|PING|PREamble|RESERVed|SPLit}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPECIALType?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:ET:VALue {BULK|CONTROL|NOCARE|INTERRUPT|ISOchronous}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:ET:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:HUB:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:HUB:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:PORT:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:PORT:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:SC:VALue {CSPLIT|NOCARE|SSPLIT}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:SC:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:SE:VALue {NOCARE|FULLSPEED|ISOALL|ISOEND|ISOMID|ISOSTART|LOWSPEED}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:SE:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:TOKENType {ANY|IN|OUT|SETUP|SOF}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:TOKENType?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:USB3G2CHARacter {COM|EDB|END|EPF|SDP|SHP|SKP|SLC|SUB|Any}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:USB3G2CHARacter?
- SEARCH:SEARCH<x>:TRIGger:A:CYCLe:HIGHLimit <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:CYCLe:HIGHLimit?
- SEARCH:SEARCH<x>:TRIGger:A:CYCLe:POLarity {POSitive|NEGative}
- SEARCH:SEARCH<x>:TRIGger:A:CYCLe:POLarity?
- SEARCH:SEARCH<x>:TRIGger:A:CYCLe:SOUrce {CH<x>|MATH<x>|REF<x>}
- SEARCH:SEARCH<x>:TRIGger:A:CYCLe:SOUrce?
- SEARCH:SEARCH<x>:TRIGger:A:CYCLe:THReshold <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:CYCLe:THReshold?
- SEARCH:SEARCH<x>:TRIGger:A:CYCLe:VIEW {PERIOD|FREQUENCY}
- SEARCH:SEARCH<x>:TRIGger:A:CYCLe:VIEW?
- SEARCH:SEARCH<x>:TRIGger:A:CYCLe:WHEn {LESSthan|MOREthan|EQual|UNEqual|WIThin|OUTside}
- SEARCH:SEARCH<x>:TRIGger:A:CYCLe:WHEn?
- SEARCH:SEARCH<x>:TRIGger:A:EDGE:SLOpe {RISe|FALL|EITher}
- SEARCH:SEARCH<x>:TRIGger:A:EDGE:SLOpe?
- SEARCH:SEARCH<x>:TRIGger:A:EDGE:SOUrce {CH<x>|CH<x>_D<x>|MATH<x>|REF<x>|REF<x>_D<x>}
- SEARCH:SEARCH<x>:TRIGger:A:EDGE:SOUrce?
- SEARCH:SEARCH<x>:TRIGger:A:EDGE:THReshold <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:EDGE:THReshold?
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:CLOCk:THReshold <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:CLOCk:THReshold?
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:DELTatime <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:DELTatime?
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:FUNCtion {AND|NANd|NOR|OR}
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:FUNCtion?
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:INPUT:CLOCK:SOUrce {CH<x>|CH<x>_D<x>|REF<x>_D<x>}
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:INPUT:CLOCK:SOUrce?
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LEVel:CH<x> <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LEVel:CH<x>?
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LEVel:MATH<x> <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LEVel:MATH<x>?
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LEVel:REF<x> <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LEVel:REF<x>?
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LOGICPattern:CH<x> {H|L|X}
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LOGICPattern:CH<x>?
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LOGICPattern:CH<x>_D<x> {H|L|X}
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LOGICPattern:CH<x>_D<x>?
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LOGICPattern:MATH<x> {H|L|X}
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LOGICPattern:MATH<x>?
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LOGICPattern:REF<x> {H|L|X}
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LOGICPattern:REF<x>?
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:POLarity {POSitive|NEGative|EITher}
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:POLarity?
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:USEClockedge {ON|OFF|1|0}
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:USEClockedge?
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:WHEn {TRUe|FALSe|MOREthan|LESSThan|EQual|UNEQual}
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:WHEn?
- SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:HIGHLimit <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:HIGHLimit?
- SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:LOGICQUALification {ON|OFF}
- SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:LOGICQUALification?
- SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:LOWLimit <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:LOWLimit?
- SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:POLarity {POSitive|NEGative}
- SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:POLarity?
- SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:SOUrce {CH<x>|CH<x>_D<x>|REF<x>|REF<x>_D<x>}
- SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:SOUrce?
- SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:THReshold <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:THReshold?
- SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:WHEn {LESSthan|MOREthan|EQual|UNEQual|WIThin|OUTside}
- SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:WHEn?
- SEARCH:SEARCH<x>:TRIGger:A:RUNT:LOGICQUALification {ON|OFF}
- SEARCH:SEARCH<x>:TRIGger:A:RUNT:LOGICQUALification?
- SEARCH:SEARCH<x>:TRIGger:A:RUNT:POLarity {POSitive|NEGative|EITher}
- SEARCH:SEARCH<x>:TRIGger:A:RUNT:POLarity?
- SEARCH:SEARCH<x>:TRIGger:A:RUNT:SOUrce {CH<x>|REF<x>}
- SEARCH:SEARCH<x>:TRIGger:A:RUNT:SOUrce?
- SEARCH:SEARCH<x>:TRIGger:A:RUNT:THReshold:HIGH <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:RUNT:THReshold:HIGH?
- SEARCH:SEARCH<x>:TRIGger:A:RUNT:THReshold:LOW <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:RUNT:THReshold:LOW?
- SEARCH:SEARCH<x>:TRIGger:A:RUNT:WHEn {OCCURS|LESSthan|MOREthan|EQual|NOTEQual}
- SEARCH:SEARCH<x>:TRIGger:A:RUNT:WHEn?
- SEARCH:SEARCH<x>:TRIGger:A:RUNT:WIDth <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:RUNT:WIDth?
- SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:EDGE {FALL|RISe}
- SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:EDGE?
- SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:SOUrce {CH<x>|CH<x>_D<x>|MATH<x>|REF<x>|REF<x>_D<x>}
- SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:SOUrce?
- SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:THReshold <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:THReshold?
- SEARCH:SEARCH<x>:TRIGger:A:SETHold:HOLDTime <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:SETHold:HOLDTime?
- SEARCH:SEARCH<x>:TRIGger:A:SETHold:LEVel:CH<x> <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:SETHold:LEVel:CH<x>?
- SEARCH:SEARCH<x>:TRIGger:A:SETHold:LEVel:MATH<x> <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:SETHold:LEVel:MATH<x>?
- SEARCH:SEARCH<x>:TRIGger:A:SETHold:LEVel:REF<x> <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:SETHold:LEVel:REF<x>?
- SEARCH:SEARCH<x>:TRIGger:A:SETHold:LOGICPattern:CH<x> {INCLude|DONTInclude}
- SEARCH:SEARCH<x>:TRIGger:A:SETHold:LOGICPattern:CH<x>?
- SEARCH:SEARCH<x>:TRIGger:A:SETHold:LOGICPattern:CH<x>_D<x> {INCLude|DONTInclude}
- SEARCH:SEARCH<x>:TRIGger:A:SETHold:LOGICPattern:CH<x>_D<x>?
- SEARCH:SEARCH<x>:TRIGger:A:SETHold:LOGICPattern:MATH<x> {INCLude|DONTInclude}
- SEARCH:SEARCH<x>:TRIGger:A:SETHold:LOGICPattern:MATH<x>?
- SEARCH:SEARCH<x>:TRIGger:A:SETHold:LOGICPattern:REF<x> {INCLude|DONTInclude}
- SEARCH:SEARCH<x>:TRIGger:A:SETHold:LOGICPattern:REF<x>?
- SEARCH:SEARCH<x>:TRIGger:A:SETHold:SETTime <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:SETHold:SETTime?
- SEARCH:SEARCH<x>:TRIGger:A:STATE {ON|OFF|<NR1>}
- SEARCH:SEARCH<x>:TRIGger:A:STOPAcq {ON|OFF|<NR1>}
- SEARCH:SEARCH<x>:TRIGger:A:STOPAcq?
- SEARCH:SEARCH<x>:TRIGger:A:TIMEOut:LOGICQUALification {ON|OFF}
- SEARCH:SEARCH<x>:TRIGger:A:TIMEOut:LOGICQUALification?
- SEARCH:SEARCH<x>:TRIGger:A:TIMEOut:POLarity {STAYSHigh|STAYSLow|EITher}
- SEARCH:SEARCH<x>:TRIGger:A:TIMEOut:POLarity?
- SEARCH:SEARCH<x>:TRIGger:A:TIMEOut:SOUrce {CH<x>|CH<x>_D<x>|MATH<x>|REF<x>|REF<x>_D<x>}
- SEARCH:SEARCH<x>:TRIGger:A:TIMEOut:SOUrce?
- SEARCH:SEARCH<x>:TRIGger:A:TIMEOut:THReshold <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:TIMEOut:THReshold?
- SEARCH:SEARCH<x>:TRIGger:A:TIMEOut:TIMe <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:TIMEOut:TIMe?
- SEARCH:SEARCH<x>:TRIGger:A:TRANsition:DELTATime <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:TRANsition:DELTATime?
- SEARCH:SEARCH<x>:TRIGger:A:TRANsition:LOGICQUALification {ON|OFF}
- SEARCH:SEARCH<x>:TRIGger:A:TRANsition:LOGICQUALification?
- SEARCH:SEARCH<x>:TRIGger:A:TRANsition:POLarity {POSitive|NEGative|EITher}
- SEARCH:SEARCH<x>:TRIGger:A:TRANsition:POLarity?
- SEARCH:SEARCH<x>:TRIGger:A:TRANsition:SOUrce {CH<x>|MATH<x>|REF<x>}
- SEARCH:SEARCH<x>:TRIGger:A:TRANsition:SOUrce?
- SEARCH:SEARCH<x>:TRIGger:A:TRANsition:THReshold:HIGH <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:TRANsition:THReshold:HIGH?
- SEARCH:SEARCH<x>:TRIGger:A:TRANsition:THReshold:LOW <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:TRANsition:THReshold:LOW?
- SEARCH:SEARCH<x>:TRIGger:A:TRANsition:WHEn {FASTERthan|SLOWERthan|EQual|UNEQual}
- SEARCH:SEARCH<x>:TRIGger:A:TRANsition:WHEn?
- SEARCH:SEARCH<x>:TRIGger:A:TYPe {EDGE|RUNT|TRANsition|PULSEWidth|TIMEOut|LOGIc|SETHold|WINdow|Bus}
- SEARCH:SEARCH<x>:TRIGger:A:TYPe?
- SEARCH:SEARCH<x>:TRIGger:A:WINdow:CROSSIng {UPPer|LOWer|EITher|NONe}
- SEARCH:SEARCH<x>:TRIGger:A:WINdow:CROSSIng?
- SEARCH:SEARCH<x>:TRIGger:A:WINdow:LOGICQUALification {ON|OFF}
- SEARCH:SEARCH<x>:TRIGger:A:WINdow:LOGICQUALification?
- SEARCH:SEARCH<x>:TRIGger:A:WINdow:POLarity {UPPer|LOWer|EITher|NONe}
- SEARCH:SEARCH<x>:TRIGger:A:WINdow:POLarity?
- SEARCH:SEARCH<x>:TRIGger:A:WINdow:SOUrce {CH<x>|MATH<x>|REF<x>}
- SEARCH:SEARCH<x>:TRIGger:A:WINdow:SOUrce?
- SEARCH:SEARCH<x>:TRIGger:A:WINdow:THReshold:HIGH <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:WINdow:THReshold:HIGH?
- SEARCH:SEARCH<x>:TRIGger:A:WINdow:THReshold:LOW <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:WINdow:THReshold:LOW?
- SEARCH:SEARCH<x>:TRIGger:A:WINdow:WHEn {ENTERSWindow|EXITSWindow|INSIDEGreater|OUTSIDEGreater}
- SEARCH:SEARCH<x>:TRIGger:A:WINdow:WHEn?
- SEARCH:SEARCH<x>:TRIGger:A:WINdow:WIDth <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:WINdow:WIDth?
- SEARCH:SELected SEARCH1

Search

Bases: SCPICmdRead

The SEARCH command tree.

Usage
  • Using the .query() method will send the SEARCH? query.
  • Using the .verify(value) method will send the SEARCH? query and raise an AssertionError if the returned value does not match value.
Properties
  • .addnew: The SEARCH:ADDNew command.
  • .deleteall: The SEARCH:DELETEALL command.
  • .delete: The SEARCH:DELete command.
  • .list: The SEARCH:LIST command.
  • .search: The SEARCH:SEARCH<x> command tree.
  • .selected: The SEARCH:SELected command.

addnew property

addnew: SearchAddnew

Return the SEARCH:ADDNew command.

Description
  • This command adds the specified search.
Usage
  • Using the .write(value) method will send the SEARCH:ADDNew value command.
SCPI Syntax
- SEARCH:ADDNew <QString>
Info
  • <QString> is the specified search. The argument is of the form ‘SEARCH‘, where is ≥ 1.

delete property

delete: SearchDelete

Return the SEARCH:DELete command.

Description
  • This command deletes the specified search.
Usage
  • Using the .write(value) method will send the SEARCH:DELete value command.
SCPI Syntax
- SEARCH:DELete <QString>
Info
  • <QString> is the specified search. The argument is of the form ‘SEARCH‘, where is ≥ 1.

deleteall property

deleteall: SearchDeleteall

Return the SEARCH:DELETEALL command.

Description
  • This command deletes all the active instances of search definitions defined in the scope application.
Usage
  • Using the .write() method will send the SEARCH:DELETEALL command.
SCPI Syntax
- SEARCH:DELETEALL

list property

list: SearchList

Return the SEARCH:LIST command.

Description
  • This command returns a comma separated list of all currently defined searches.
Usage
  • Using the .query() method will send the SEARCH:LIST? query.
  • Using the .verify(value) method will send the SEARCH:LIST? query and raise an AssertionError if the returned value does not match value.
SCPI Syntax
- SEARCH:LIST?

search property

Return the SEARCH:SEARCH<x> command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .copy: The SEARCH:SEARCH<x>:COPy command.
  • .navigate: The SEARCH:SEARCH<x>:NAVigate command.
  • .total: The SEARCH:SEARCH<x>:TOTAL command.
  • .trigger: The SEARCH:SEARCH<x>:TRIGger command tree.

selected property

selected: SearchSelected

Return the SEARCH:SELected command.

Description
  • This command sets or queries the selected search, for example SEARCH1. The search number is specified by x.
Usage
  • Using the .write(value) method will send the SEARCH:SELected value command.
SCPI Syntax
- SEARCH:SELected SEARCH1
Info
  • SEARCH1 is the specified search.

SearchAddnew

Bases: SCPICmdWrite

The SEARCH:ADDNew command.

Description
  • This command adds the specified search.
Usage
  • Using the .write(value) method will send the SEARCH:ADDNew value command.
SCPI Syntax
- SEARCH:ADDNew <QString>
Info
  • <QString> is the specified search. The argument is of the form ‘SEARCH‘, where is ≥ 1.

SearchDelete

Bases: SCPICmdWrite

The SEARCH:DELete command.

Description
  • This command deletes the specified search.
Usage
  • Using the .write(value) method will send the SEARCH:DELete value command.
SCPI Syntax
- SEARCH:DELete <QString>
Info
  • <QString> is the specified search. The argument is of the form ‘SEARCH‘, where is ≥ 1.

SearchDeleteall

Bases: SCPICmdWriteNoArguments

The SEARCH:DELETEALL command.

Description
  • This command deletes all the active instances of search definitions defined in the scope application.
Usage
  • Using the .write() method will send the SEARCH:DELETEALL command.
SCPI Syntax
- SEARCH:DELETEALL

SearchList

Bases: SCPICmdRead

The SEARCH:LIST command.

Description
  • This command returns a comma separated list of all currently defined searches.
Usage
  • Using the .query() method will send the SEARCH:LIST? query.
  • Using the .verify(value) method will send the SEARCH:LIST? query and raise an AssertionError if the returned value does not match value.
SCPI Syntax
- SEARCH:LIST?

SearchSearchItem

Bases: ValidatedDynamicNumberCmd, SCPICmdRead

The SEARCH:SEARCH<x> command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>? query and raise an AssertionError if the returned value does not match value.
Properties
  • .copy: The SEARCH:SEARCH<x>:COPy command.
  • .navigate: The SEARCH:SEARCH<x>:NAVigate command.
  • .total: The SEARCH:SEARCH<x>:TOTAL command.
  • .trigger: The SEARCH:SEARCH<x>:TRIGger command tree.

copy property

Return the SEARCH:SEARCH<x>:COPy command.

Description
  • This command (no query form) copies the search criteria to the trigger, the trigger criteria to a search, or copy search to search. is the search number.
Usage
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:COPy value command.
SCPI Syntax
- SEARCH:SEARCH<x>:COPy {SEARCHtotrigger|TRIGgertosearch|FROMSearch<x>}
Info
  • SEARCHtotrigger copies the search criteria to the trigger.
  • TRIGgertosearch copies the trigger criteria to the search.
  • FROMSearch<x> copies the search criteria to the search, where is 1 to 8.

navigate property

Return the SEARCH:SEARCH<x>:NAVigate command.

Description
  • This command sets the navigation action for search marks. The NONE action is the default setting when no action is being taken. The search number is specified by x.
Usage
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:NAVigate value command.
SCPI Syntax
- SEARCH:SEARCH<x>:NAVigate {NEXT|PREVious|MIN|NONE|MAX}
Info
  • NEXT goes to the next search mark.
  • PREVious goes to the previous search mark.
  • MIN goes to the search result with the smallest value. Only supported by search results which have quantitative values (example: pulse width is supported, but not edge).
  • NONE is the default setting when no action is being taken.
  • MAX goes to the search result with the largest value. Only supported by search results which have quantitative values (example: pulse width is supported, but not edge).

total property

Return the SEARCH:SEARCH<x>:TOTAL command.

Description
  • This query-only command returns the total number of found search marks for this search. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TOTAL? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TOTAL? query and raise an AssertionError if the returned value does not match value.
SCPI Syntax
- SEARCH:SEARCH<x>:TOTAL?

trigger property

Return the SEARCH:SEARCH<x>:TRIGger command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .a: The SEARCH:SEARCH<x>:TRIGger:A command tree.

SearchSearchItemCopy

Bases: SCPICmdWrite

The SEARCH:SEARCH<x>:COPy command.

Description
  • This command (no query form) copies the search criteria to the trigger, the trigger criteria to a search, or copy search to search. is the search number.
Usage
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:COPy value command.
SCPI Syntax
- SEARCH:SEARCH<x>:COPy {SEARCHtotrigger|TRIGgertosearch|FROMSearch<x>}
Info
  • SEARCHtotrigger copies the search criteria to the trigger.
  • TRIGgertosearch copies the trigger criteria to the search.
  • FROMSearch<x> copies the search criteria to the search, where is 1 to 8.

SearchSearchItemNavigate

Bases: SCPICmdWrite

The SEARCH:SEARCH<x>:NAVigate command.

Description
  • This command sets the navigation action for search marks. The NONE action is the default setting when no action is being taken. The search number is specified by x.
Usage
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:NAVigate value command.
SCPI Syntax
- SEARCH:SEARCH<x>:NAVigate {NEXT|PREVious|MIN|NONE|MAX}
Info
  • NEXT goes to the next search mark.
  • PREVious goes to the previous search mark.
  • MIN goes to the search result with the smallest value. Only supported by search results which have quantitative values (example: pulse width is supported, but not edge).
  • NONE is the default setting when no action is being taken.
  • MAX goes to the search result with the largest value. Only supported by search results which have quantitative values (example: pulse width is supported, but not edge).

SearchSearchItemTotal

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TOTAL command.

Description
  • This query-only command returns the total number of found search marks for this search. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TOTAL? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TOTAL? query and raise an AssertionError if the returned value does not match value.
SCPI Syntax
- SEARCH:SEARCH<x>:TOTAL?

SearchSearchItemTrigger

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger? query and raise an AssertionError if the returned value does not match value.
Properties
  • .a: The SEARCH:SEARCH<x>:TRIGger:A command tree.

a property

Return the SEARCH:SEARCH<x>:TRIGger:A command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .bus: The SEARCH:SEARCH<x>:TRIGger:A:BUS command tree.
  • .cycle: The SEARCH:SEARCH<x>:TRIGger:A:CYCLe command tree.
  • .edge: The SEARCH:SEARCH<x>:TRIGger:A:EDGE command tree.
  • .logic: The SEARCH:SEARCH<x>:TRIGger:A:LOGIc command tree.
  • .pulsewidth: The SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth command tree.
  • .runt: The SEARCH:SEARCH<x>:TRIGger:A:RUNT command tree.
  • .sethold: The SEARCH:SEARCH<x>:TRIGger:A:SETHold command tree.
  • .state: The SEARCH:SEARCH<x>:TRIGger:A:STATE command.
  • .stopacq: The SEARCH:SEARCH<x>:TRIGger:A:STOPAcq command.
  • .timeout: The SEARCH:SEARCH<x>:TRIGger:A:TIMEOut command tree.
  • .transition: The SEARCH:SEARCH<x>:TRIGger:A:TRANsition command tree.
  • .type: The SEARCH:SEARCH<x>:TRIGger:A:TYPe command.
  • .window: The SEARCH:SEARCH<x>:TRIGger:A:WINdow command tree.

SearchSearchItemTriggerA

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A? query and raise an AssertionError if the returned value does not match value.
Properties
  • .bus: The SEARCH:SEARCH<x>:TRIGger:A:BUS command tree.
  • .cycle: The SEARCH:SEARCH<x>:TRIGger:A:CYCLe command tree.
  • .edge: The SEARCH:SEARCH<x>:TRIGger:A:EDGE command tree.
  • .logic: The SEARCH:SEARCH<x>:TRIGger:A:LOGIc command tree.
  • .pulsewidth: The SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth command tree.
  • .runt: The SEARCH:SEARCH<x>:TRIGger:A:RUNT command tree.
  • .sethold: The SEARCH:SEARCH<x>:TRIGger:A:SETHold command tree.
  • .state: The SEARCH:SEARCH<x>:TRIGger:A:STATE command.
  • .stopacq: The SEARCH:SEARCH<x>:TRIGger:A:STOPAcq command.
  • .timeout: The SEARCH:SEARCH<x>:TRIGger:A:TIMEOut command tree.
  • .transition: The SEARCH:SEARCH<x>:TRIGger:A:TRANsition command tree.
  • .type: The SEARCH:SEARCH<x>:TRIGger:A:TYPe command.
  • .window: The SEARCH:SEARCH<x>:TRIGger:A:WINdow command tree.

bus property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .arinc429a: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A command tree.
  • .audio: The SEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio command tree.
  • .autoethernet: The SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet command tree.
  • .can: The SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN command tree.
  • .cphy: The SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY command tree.
  • .cxpi: The SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI command tree.
  • .dphy: The SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY command tree.
  • .espi: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI command tree.
  • .ethercat: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT command tree.
  • .ethernet: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet command tree.
  • .eusb: The SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB command tree.
  • .flexray: The SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY command tree.
  • .i2c: The SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C command tree.
  • .i3c: The SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C command tree.
  • .lin: The SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN command tree.
  • .manchester: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester command tree.
  • .mdio: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO command tree.
  • .mil1553b: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B command tree.
  • .nfc: The SEARCH:SEARCH<x>:TRIGger:A:BUS:NFC command tree.
  • .nrz: The SEARCH:SEARCH<x>:TRIGger:A:BUS:NRZ command tree.
  • .onewire: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe command tree.
  • .parallel: The SEARCH:SEARCH<x>:TRIGger:A:BUS:PARallel command tree.
  • .pcie: The SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE command tree.
  • .psifive: The SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe command tree.
  • .rs232c: The SEARCH:SEARCH<x>:TRIGger:A:BUS:RS232C command tree.
  • .s8b10b: The SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B command tree.
  • .sdlc: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC command tree.
  • .sent: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT command tree.
  • .smbus: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS command tree.
  • .source: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SOUrce command.
  • .spacewire: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SPACEWIRe command tree.
  • .spi: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SPI command tree.
  • .spmi: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI command tree.
  • .svid: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SVID command tree.
  • .usb: The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB command tree.

cycle property

Return the SEARCH:SEARCH<x>:TRIGger:A:CYCLe command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:CYCLe? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:CYCLe? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .highlimit: The SEARCH:SEARCH<x>:TRIGger:A:CYCLe:HIGHLimit command.
  • .polarity: The SEARCH:SEARCH<x>:TRIGger:A:CYCLe:POLarity command.
  • .source: The SEARCH:SEARCH<x>:TRIGger:A:CYCLe:SOUrce command.
  • .threshold: The SEARCH:SEARCH<x>:TRIGger:A:CYCLe:THReshold command.
  • .view: The SEARCH:SEARCH<x>:TRIGger:A:CYCLe:VIEW command.
  • .when: The SEARCH:SEARCH<x>:TRIGger:A:CYCLe:WHEn command.

edge property

Return the SEARCH:SEARCH<x>:TRIGger:A:EDGE command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:EDGE? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:EDGE? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .slope: The SEARCH:SEARCH<x>:TRIGger:A:EDGE:SLOpe command.
  • .source: The SEARCH:SEARCH<x>:TRIGger:A:EDGE:SOUrce command.
  • .threshold: The SEARCH:SEARCH<x>:TRIGger:A:EDGE:THReshold command.

logic property

Return the SEARCH:SEARCH<x>:TRIGger:A:LOGIc command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .clock: The SEARCH:SEARCH<x>:TRIGger:A:LOGIc:CLOCk command tree.
  • .deltatime: The SEARCH:SEARCH<x>:TRIGger:A:LOGIc:DELTatime command.
  • .function: The SEARCH:SEARCH<x>:TRIGger:A:LOGIc:FUNCtion command.
  • .input: The SEARCH:SEARCH<x>:TRIGger:A:LOGIc:INPUT command tree.
  • .level: The SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LEVel command tree.
  • .logicpattern: The SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LOGICPattern command tree.
  • .polarity: The SEARCH:SEARCH<x>:TRIGger:A:LOGIc:POLarity command.
  • .useclockedge: The SEARCH:SEARCH<x>:TRIGger:A:LOGIc:USEClockedge command.
  • .when: The SEARCH:SEARCH<x>:TRIGger:A:LOGIc:WHEn command.

pulsewidth property

Return the SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .highlimit: The SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:HIGHLimit command.
  • .logicqualification: The SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:LOGICQUALification command.
  • .lowlimit: The SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:LOWLimit command.
  • .polarity: The SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:POLarity command.
  • .source: The SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:SOUrce command.
  • .threshold: The SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:THReshold command.
  • .when: The SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:WHEn command.

runt property

Return the SEARCH:SEARCH<x>:TRIGger:A:RUNT command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:RUNT? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:RUNT? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .logicqualification: The SEARCH:SEARCH<x>:TRIGger:A:RUNT:LOGICQUALification command.
  • .polarity: The SEARCH:SEARCH<x>:TRIGger:A:RUNT:POLarity command.
  • .source: The SEARCH:SEARCH<x>:TRIGger:A:RUNT:SOUrce command.
  • .threshold: The SEARCH:SEARCH<x>:TRIGger:A:RUNT:THReshold command tree.
  • .when: The SEARCH:SEARCH<x>:TRIGger:A:RUNT:WHEn command.
  • .width: The SEARCH:SEARCH<x>:TRIGger:A:RUNT:WIDth command.

sethold property

Return the SEARCH:SEARCH<x>:TRIGger:A:SETHold command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .clock: The SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk command tree.
  • .holdtime: The SEARCH:SEARCH<x>:TRIGger:A:SETHold:HOLDTime command.
  • .level: The SEARCH:SEARCH<x>:TRIGger:A:SETHold:LEVel command tree.
  • .logicpattern: The SEARCH:SEARCH<x>:TRIGger:A:SETHold:LOGICPattern command tree.
  • .settime: The SEARCH:SEARCH<x>:TRIGger:A:SETHold:SETTime command.

state property

Return the SEARCH:SEARCH<x>:TRIGger:A:STATE command.

Description
  • This command sets or queries the enabled state of the search. The search number is specified by x.
Usage
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:STATE value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:STATE {ON|OFF|<NR1>}
Info
  • <NR1> = 1 enables the search. Any other character disables the search.
  • ON enables the search.
  • OFF disables the search.

stopacq property

Return the SEARCH:SEARCH<x>:TRIGger:A:STOPAcq command.

Description
  • This command sets or queries whether acquisitions are stopped when a search hit is found. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:STOPAcq? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:STOPAcq? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:STOPAcq value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:STOPAcq {ON|OFF|<NR1>}
- SEARCH:SEARCH<x>:TRIGger:A:STOPAcq?
Info
  • <x> is the number of the search on which to enable or disable the stop acquisition function.
  • <NR1> = 1 enables stopping when a search hit is found. Any other character disables the feature.
  • ON enables stopping when a search hit is found.
  • OFF disables stopping on a search hit.

timeout property

Return the SEARCH:SEARCH<x>:TRIGger:A:TIMEOut command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:TIMEOut? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:TIMEOut? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .logicqualification: The SEARCH:SEARCH<x>:TRIGger:A:TIMEOut:LOGICQUALification command.
  • .polarity: The SEARCH:SEARCH<x>:TRIGger:A:TIMEOut:POLarity command.
  • .source: The SEARCH:SEARCH<x>:TRIGger:A:TIMEOut:SOUrce command.
  • .threshold: The SEARCH:SEARCH<x>:TRIGger:A:TIMEOut:THReshold command.
  • .time: The SEARCH:SEARCH<x>:TRIGger:A:TIMEOut:TIMe command.

transition property

Return the SEARCH:SEARCH<x>:TRIGger:A:TRANsition command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:TRANsition? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:TRANsition? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .deltatime: The SEARCH:SEARCH<x>:TRIGger:A:TRANsition:DELTATime command.
  • .logicqualification: The SEARCH:SEARCH<x>:TRIGger:A:TRANsition:LOGICQUALification command.
  • .polarity: The SEARCH:SEARCH<x>:TRIGger:A:TRANsition:POLarity command.
  • .source: The SEARCH:SEARCH<x>:TRIGger:A:TRANsition:SOUrce command.
  • .threshold: The SEARCH:SEARCH<x>:TRIGger:A:TRANsition:THReshold command tree.
  • .when: The SEARCH:SEARCH<x>:TRIGger:A:TRANsition:WHEn command.

type property

Return the SEARCH:SEARCH<x>:TRIGger:A:TYPe command.

Description
  • This command sets or queries the trigger type setting for a search to determine where to place a mark. The search number is specified by x. Note: Some trigger types are optional.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:TYPe? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:TYPe? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:TYPe value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:TYPe {EDGE|RUNT|TRANsition|PULSEWidth|TIMEOut|LOGIc|SETHold|WINdow|Bus}
- SEARCH:SEARCH<x>:TRIGger:A:TYPe?
Info
  • EDGE triggers when the source input signal amplitude crosses the specified level in the direction given by the slope.
  • RUNT triggers when a pulse crosses the first preset voltage threshold but does not cross the second preset threshold before recrossing the first. The thresholds are set with the SEARCH:SEARCH<x>:TRIGger:A:RUNt:HIGH and SEARCH:SEARCH<x>:TRIGger:A:RUNt:LOW THRESHOLD commands.
  • TRANsition triggers when a pulse crosses both thresholds in the same direction as the specified polarity and the transition time between the two threshold crossings is greater or less than the specified time delta.
  • PULSEWidth triggers on input signal source pulses that are inside or outside of the given time range specified by SEARCH:SEARCH<x>:TRIGger:A:LOGIc:PATtern:WHEn:LESSLimit and SEARCH:SEARCH<x>:TRIGger:A:LOGIc:PATtern:WHEn:MORELimit. The polarity is selected using the SEARCH:SEARCH<x>:TRIGger:A:RUNT: POLarity command.
  • TIMEOut triggers on an input signal source that stays above, stays below, or stays either above or beow the trigger level for a given time.
  • LOGIc specifies that a search occurs when specified conditions are met, and is controlled by the SEARCH:A:LOGIc commands.
  • SETHold triggers on a functional pattern combination of one to three data sources at the time of the clock transition.
  • WINdow triggers on an input signal source that enters or exits the horizontal band defined by the two trigger levels.
  • Bus specifies that a search occurs when a communications signal is found.

window property

Return the SEARCH:SEARCH<x>:TRIGger:A:WINdow command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:WINdow? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:WINdow? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .crossing: The SEARCH:SEARCH<x>:TRIGger:A:WINdow:CROSSIng command.
  • .logicqualification: The SEARCH:SEARCH<x>:TRIGger:A:WINdow:LOGICQUALification command.
  • .polarity: The SEARCH:SEARCH<x>:TRIGger:A:WINdow:POLarity command.
  • .source: The SEARCH:SEARCH<x>:TRIGger:A:WINdow:SOUrce command.
  • .threshold: The SEARCH:SEARCH<x>:TRIGger:A:WINdow:THReshold command tree.
  • .when: The SEARCH:SEARCH<x>:TRIGger:A:WINdow:WHEn command.
  • .width: The SEARCH:SEARCH<x>:TRIGger:A:WINdow:WIDth command.

SearchSearchItemTriggerABus

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS? query and raise an AssertionError if the returned value does not match value.
Properties
  • .arinc429a: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A command tree.
  • .audio: The SEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio command tree.
  • .autoethernet: The SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet command tree.
  • .can: The SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN command tree.
  • .cphy: The SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY command tree.
  • .cxpi: The SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI command tree.
  • .dphy: The SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY command tree.
  • .espi: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI command tree.
  • .ethercat: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT command tree.
  • .ethernet: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet command tree.
  • .eusb: The SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB command tree.
  • .flexray: The SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY command tree.
  • .i2c: The SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C command tree.
  • .i3c: The SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C command tree.
  • .lin: The SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN command tree.
  • .manchester: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester command tree.
  • .mdio: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO command tree.
  • .mil1553b: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B command tree.
  • .nfc: The SEARCH:SEARCH<x>:TRIGger:A:BUS:NFC command tree.
  • .nrz: The SEARCH:SEARCH<x>:TRIGger:A:BUS:NRZ command tree.
  • .onewire: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe command tree.
  • .parallel: The SEARCH:SEARCH<x>:TRIGger:A:BUS:PARallel command tree.
  • .pcie: The SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE command tree.
  • .psifive: The SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe command tree.
  • .rs232c: The SEARCH:SEARCH<x>:TRIGger:A:BUS:RS232C command tree.
  • .s8b10b: The SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B command tree.
  • .sdlc: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC command tree.
  • .sent: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT command tree.
  • .smbus: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS command tree.
  • .source: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SOUrce command.
  • .spacewire: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SPACEWIRe command tree.
  • .spi: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SPI command tree.
  • .spmi: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI command tree.
  • .svid: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SVID command tree.
  • .usb: The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB command tree.

arinc429a property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .condition: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:CONDition command.
  • .data: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:DATa command tree.
  • .errtype: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:ERRTYPe command.
  • .label: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:LABel command tree.
  • .sdi: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:SDI command tree.
  • .ssm: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:SSM command tree.

audio property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .condition: The SEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:CONDition command.
  • .data: The SEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:DATa command tree.

autoethernet property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet? query and raise an AssertionError if the returned value does not match value.
Info
  • SEARCH<x> is the Search number.
Sub-properties
  • .condition: The SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:CONDition command.
  • .data: The SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:DATa command tree.
  • .errortype: The SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:ERRORTYPe command.
  • .ether: The SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:ETHer command tree.
  • .ipheader: The SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:IPHeader command tree.
  • .mac: The SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:MAC command tree.
  • .payload: The SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:PAYLoad command tree.
  • .qtag: The SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:QTAG command tree.
  • .qualifier: The SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:QUALifier command.
  • .tbt1s: The SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:TBT1s command tree.
  • .tcpheader: The SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:TCPHeader command tree.

can property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .ads: The SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:ADS command tree.
  • .condition: The SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:CONDition command.
  • .crctype: The SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:CRCType command.
  • .das: The SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DAS command tree.
  • .data: The SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa command tree.
  • .errtype: The SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:ERRType command.
  • .fd: The SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:FD command tree.
  • .frametype: The SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:FRAMEtype command.
  • .identifier: The SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:IDentifier command tree.
  • .pidentifier: The SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:PIDentifier command tree.
  • .xldata: The SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:XLDATa command tree.

cphy property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .blue: The SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:BLUe command tree.
  • .condition: The SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:CONDition command.
  • .data: The SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:DATa command tree.
  • .error: The SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:ERRor command tree.
  • .escapemode: The SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:ESCAPEMODe command tree.
  • .green: The SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:GREen command tree.
  • .mode: The SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:MODe command tree.
  • .packets: The SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:PACKets command tree.
  • .pixel: The SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:PIXel command tree.
  • .red: The SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:RED command tree.
  • .symbol: The SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:SYMBol command tree.
  • .word: The SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:WORD command tree.
  • .wordcount: The SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:WORDCOUNt command tree.
  • .ycbcr: The SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:YCBCR command tree.
  • .yuv: The SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:YUV command tree.

cxpi property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .condition: The SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:CONDition command.
  • .counter: The SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:COUNter command tree.
  • .data: The SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:DATa command tree.
  • .dlc: The SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:DLC command tree.
  • .error: The SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:ERROR command tree.
  • .extdlc: The SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:EXTDLC command tree.
  • .frameid: The SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:FRAMEID command tree.
  • .frame: The SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:FRAMe command tree.
  • .netmn: The SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:NETMN command tree.

dphy property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .blue: The SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:BLUe command tree.
  • .condition: The SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:CONDition command.
  • .data: The SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:DATa command tree.
  • .error: The SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:ERRor command tree.
  • .escapemode: The SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:ESCAPEMODe command tree.
  • .green: The SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:GREen command tree.
  • .mode: The SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:MODe command tree.
  • .packets: The SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:PACKets command tree.
  • .pixel: The SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:PIXel command tree.
  • .red: The SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:RED command tree.
  • .wordcount: The SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:WORDCOUNt command tree.
  • .ycbcr: The SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:YCBCR command tree.
  • .yuv: The SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:YUV command tree.

espi property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .address: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:ADDRess command tree.
  • .command: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:COMMAND command tree.
  • .condition: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:CONDition command.
  • .cycletype: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:CYCLETYPe command.
  • .data: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:DATa command tree.
  • .error: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:ERRor command tree.
  • .length: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:LENGth command tree.
  • .phase: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:PHASe command.
  • .respcycle: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:RESPCYCLE command tree.
  • .smbus: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:SMBUS command tree.
  • .tag: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:TAG command tree.
  • .virtualwire: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:VIRTUALWIRe command tree.

ethercat property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .addressmode: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:ADDRESSMODe command.
  • .cntnv: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:CNTNV command tree.
  • .commandtype: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:COMMANDTYPe command.
  • .condition: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:CONDition command.
  • .cyc: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:CYC command tree.
  • .datagram: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:DATAGRAM command.
  • .datagramheader: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:DATAGRAMHEADer command.
  • .data: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:DATa command tree.
  • .destinationaddress: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:DESTINATIONADDRess command tree.
  • .deviceaddress: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:DEVICEADDRess command.
  • .error: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:ERRor command tree.
  • .frametype: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:FRAMETYPe command.
  • .hash: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:HASH command tree.
  • .header: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:HEADer command tree.
  • .identification: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:IDENtification command tree.
  • .idx: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:IDX command tree.
  • .index: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:INDex command tree.
  • .ipdestination: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:IPDESTination command tree.
  • .ipsource: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:IPSOURce command tree.
  • .irq: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:IRQ command tree.
  • .len: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:LEN command tree.
  • .logicaladdress: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:LOGICALADDRess command tree.
  • .mailboxtype: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:MAILBOXTYPe command.
  • .mailbox: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:MAILbox command.
  • .networkvariable: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:NETWORKVARiable command tree.
  • .network: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:NETWork command tree.
  • .offset: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:OFFSet command tree.
  • .position: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:POSition command tree.
  • .protocoltype: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:PROTOCOLTYPe command.
  • .pubid: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:PUBID command tree.
  • .quality: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:QUALity command tree.
  • .service: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:SERVice command tree.
  • .sourceaddress: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:SOURCEADDRess command tree.
  • .src: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:SRC command tree.
  • .tci: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:TCI command tree.
  • .wkc: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:WKC command tree.

ethernet property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .condition: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:CONDition command.
  • .data: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:DATa command tree.
  • .ipheader: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:IPHeader command tree.
  • .mac: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC command tree.
  • .qtag: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:QTAG command tree.
  • .tcpheader: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader command tree.

eusb property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .address: The SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:ADDress command tree.
  • .condition: The SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:CONDition command.
  • .databits: The SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:DATABITS command tree.
  • .data: The SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:DATa command tree.
  • .endpoint: The SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:ENDPoint command tree.
  • .endsearch: The SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:ENDSEARch command.
  • .eop: The SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:EOP command tree.
  • .eopbits: The SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:EOPBITS command tree.
  • .errtype: The SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:ERRType command.
  • .handshaketype: The SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:HANDSHAKEType command.
  • .rap: The SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:RAP command tree.
  • .sofframenumber: The SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SOFFRAMENUMber command.
  • .specialtype: The SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPECIALType command.
  • .split: The SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPLit command tree.
  • .sync: The SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SYNC command tree.
  • .syncbits: The SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SYNCBITS command tree.
  • .syncsearch: The SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SYNCSEARch command.
  • .tokentype: The SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:TOKENType command.

flexray property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .condition: The SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:CONDition command.
  • .cyclecount: The SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:CYCLEcount command tree.
  • .data: The SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:DATa command tree.
  • .eoftype: The SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:EOFTYPE command.
  • .errtype: The SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:ERRTYPE command.
  • .frameid: The SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:FRAMEID command tree.
  • .frametype: The SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:FRAMEType command.
  • .header: The SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:HEADER command tree.

i2c property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .address: The SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:ADDRess command tree.
  • .condition: The SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:CONDition command.
  • .data: The SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:DATa command tree.

i3c property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C? query and raise an AssertionError if the returned value does not match value.
Info
  • SEARCH<x> specifies the search number.
Sub-properties
  • .address: The SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:ADDRess command tree.
  • .bcr: The SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:BCR command tree.
  • .bcrtype: The SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:BCRType command tree.
  • .bpackets: The SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:BPACKets command.
  • .brgtid: The SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:BRGTID command tree.
  • .ccode: The SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:CCODe command tree.
  • .condition: The SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:CONDition command.
  • .data: The SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:DATa command tree.
  • .dcr: The SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:DCR command tree.
  • .dcrtype: The SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:DCRType command tree.
  • .dword: The SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:DWORd command tree.
  • .errortype: The SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:ERRORTYPe command.
  • .eventbyte: The SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:EVENTBYTe command tree.
  • .freqbyte: The SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:FREQBYTe command tree.
  • .gslsb: The SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:GSLSb command tree.
  • .gsmsb: The SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:GSMSb command tree.
  • .id: The SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:ID command tree.
  • .inaccbyte: The SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:INACCBYTe command tree.
  • .maxread: The SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:MAXREAD command tree.
  • .maxrturn: The SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:MAXRTURN command tree.
  • .maxwrite: The SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:MAXWRITe command tree.
  • .packets: The SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:PACKets command.
  • .saddress: The SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:SADDress command tree.
  • .sdr: The SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:SDR command tree.
  • .statebyte: The SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:STATEBYTe command tree.
  • .static: The SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:STATic command tree.
  • .supportbyte: The SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:SUPPORTBYTe command tree.
  • .testmode: The SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:TESTMODe command tree.

lin property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .condition: The SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:CONDition command.
  • .data: The SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa command tree.
  • .errtype: The SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:ERRTYPE command.
  • .identifier: The SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:IDentifier command tree.

manchester property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .condition: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:CONDition command.
  • .data: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:DATa command tree.
  • .error: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:ERRor command tree.
  • .header: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:HEADER command tree.
  • .sync: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:SYNC command tree.
  • .trailer: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:TRAILER command tree.
  • .packetoffdata: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:packetOffData command tree.

mdio property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .address: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:ADDress command tree.
  • .condition: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:CONDition command.
  • .data: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:DATa command tree.
  • .devicetype: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:DEVicetype command tree.
  • .errtype: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:ERRType command.
  • .opcode: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:OPCode command tree.
  • .physicaladdress: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:PHYSicaladdress command tree.
  • .registeraddress: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:REGisteraddress command tree.

mil1553b property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .command: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND command tree.
  • .condition: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:CONDition command.
  • .data: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:DATa command tree.
  • .errtype: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:ERRTYPe command.
  • .status: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus command tree.

nfc property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:NFC command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:NFC? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:NFC? query and raise an AssertionError if the returned value does not match value.
Info
  • SEARCH<x> is the number of the search.
Sub-properties
  • .command: The SEARCH:SEARCH<x>:TRIGger:A:BUS:NFC:COMMand command tree.
  • .condition: The SEARCH:SEARCH<x>:TRIGger:A:BUS:NFC:CONDition command.
  • .data: The SEARCH:SEARCH<x>:TRIGger:A:BUS:NFC:DATa command tree.
  • .error: The SEARCH:SEARCH<x>:TRIGger:A:BUS:NFC:ERRor command tree.
  • .payloadbits: The SEARCH:SEARCH<x>:TRIGger:A:BUS:NFC:PAYLOADBITS command.
  • .response: The SEARCH:SEARCH<x>:TRIGger:A:BUS:NFC:RESPonse command tree.
  • .type: The SEARCH:SEARCH<x>:TRIGger:A:BUS:NFC:TYPe command.
  • .uid: The SEARCH:SEARCH<x>:TRIGger:A:BUS:NFC:UID command tree.

nrz property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:NRZ command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:NRZ? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:NRZ? query and raise an AssertionError if the returned value does not match value.
Info
  • SEARCH<x> is the number of the search.
Sub-properties
  • .condition: The SEARCH:SEARCH<x>:TRIGger:A:BUS:NRZ:CONDition command.
  • .data: The SEARCH:SEARCH<x>:TRIGger:A:BUS:NRZ:DATa command tree.

onewire property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe? query and raise an AssertionError if the returned value does not match value.
Info
  • SEARCH<x> is the number of the search.
Sub-properties
  • .command: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:COMMand command tree.
  • .condition: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:CONDition command.
  • .data: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:DATa command tree.
  • .matchrom: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:MATCHROM command tree.
  • .overdrive: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:OVERDRIVe command tree.
  • .readrom: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:READROM command tree.
  • .searchrom: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:SEARCHROM command tree.

parallel property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:PARallel command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PARallel? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PARallel? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .data: The SEARCH:SEARCH<x>:TRIGger:A:BUS:PARallel:DATa command tree.

pcie property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .cheader: The SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:CHEADer command.
  • .custom: The SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:CUSTom command tree.
  • .dllp: The SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:DLLP command tree.
  • .osettype: The SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:OSETtype command.
  • .sync: The SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:SYNC command.
  • .tlp: The SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:TLP command tree.

psifive property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .blockdata: The SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:BLOCKDATa command tree.
  • .condition: The SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:CONDition command.
  • .databits: The SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:DATABITs command.
  • .data: The SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:DATa command tree.
  • .errortype: The SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:ERRORTYPe command.
  • .functioncodetype: The SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:FUNCTIONCODETYPe command.
  • .registeraddress: The SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:REGISTERADDRess command.
  • .register: The SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:REGister command tree.
  • .sensorstatus: The SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:SENSORSTATus command tree.
  • .sensor: The SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:SENSor command tree.
  • .status: The SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:STATus command tree.

rs232c property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:RS232C command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:RS232C? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:RS232C? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .condition: The SEARCH:SEARCH<x>:TRIGger:A:BUS:RS232C:CONDition command.
  • .data: The SEARCH:SEARCH<x>:TRIGger:A:BUS:RS232C:DATa command tree.

s8b10b property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B? query and raise an AssertionError if the returned value does not match value.
Info
  • SEARCH<x> is the number of the search.
Sub-properties
  • .condition: The SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:CONDition command.
  • .disparity: The SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:DISParity command.
  • .error: The SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:ERRor command.
  • .symbol: The SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:SYMbol command tree.

sdlc property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC? query and raise an AssertionError if the returned value does not match value.
Info
  • SEARCH<x> is the number of the search.
Sub-properties
  • .address: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:ADDRess command tree.
  • .condition: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:CONDition command.
  • .data: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:DATa command tree.
  • .error: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:ERROR command tree.
  • .frame: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:FRAMe command tree.
  • .staddress: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:STADDress command tree.
  • .supervisory: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:SUPervisory command tree.
  • .unnumbered: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:UNNumbered command tree.

sent property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT? query and raise an AssertionError if the returned value does not match value.
Info
  • SEARCH<x> is the number of the search.
Sub-properties
  • .condition: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:CONDition command.
  • .errtype: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:ERRType command.
  • .fast: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST command tree.
  • .pause: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:PAUSE command tree.
  • .slow: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:SLOW command tree.

smbus property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS? query and raise an AssertionError if the returned value does not match value.
Info
  • SEARCH<x> is the search identifier number.
Sub-properties
  • .address: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:ADDRess command tree.
  • .command: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:COMMand command tree.
  • .condition: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:CONDition command.
  • .data: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:DATa command tree.
  • .deviceaddr: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:DEVICEADDR command tree.
  • .error: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:ERROr command tree.
  • .fieldbyte: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:FIELDBYTe command.
  • .udiddata: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:UDIDDATa command tree.

source property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:SOUrce command.

Description
  • This command sets or queries the bus source for the bus search to determine where to place a mark. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SOUrce? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SOUrce? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SOUrce value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SOUrce B<x>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SOUrce?
Info
  • B<x> specifies the bus source as a bus number from B0 to B16.

spacewire property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:SPACEWIRe command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SPACEWIRe? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SPACEWIRe? query and raise an AssertionError if the returned value does not match value.
Info
  • SEARCH<x> is the search number.
Sub-properties
  • .condition: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SPACEWIRe:CONDition command.
  • .controlchartype: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SPACEWIRe:CONTROLCHARTYPe command.
  • .controlcodetype: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SPACEWIRe:CONTROLCODETYPe command.
  • .data: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SPACEWIRe:DATa command tree.
  • .errortype: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SPACEWIRe:ERRORTYPe command.
  • .timecode: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SPACEWIRe:TIMECode command tree.

spi property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:SPI command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SPI? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SPI? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .condition: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:CONDition command.
  • .data: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:DATa command tree.
  • .sourcetype: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:SOURCETYpe command.

spmi property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI? query and raise an AssertionError if the returned value does not match value.
Info
  • SEARCH<x> is the search identifier number.
Sub-properties
  • .condition: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:CONDition command.
  • .data: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:DATa command tree.
  • .masteraddress: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:MASTERADDRess command tree.
  • .noresponse: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:NORESPonse command.
  • .registeraddress: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:REGISTERADDRess command tree.
  • .slaveaddress: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:SLAVEADDRess command tree.

svid property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:SVID command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SVID? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SVID? query and raise an AssertionError if the returned value does not match value.
Info
  • SEARCH<x> is the search identifier number.
Sub-properties
  • .command: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:COMMand command tree.
  • .condition: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:CONDition command.
  • .error: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:ERRor command tree.
  • .payload: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:PAYLoad command tree.
  • .slave: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:SLAVE command tree.

usb property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .address: The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ADDress command tree.
  • .character: The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:CHARacter command.
  • .cheader: The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:CHEADer command.
  • .compliance: The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:COMPliance command.
  • .condition: The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:CONDition command.
  • .crctype: The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:CRCTYPe command.
  • .custom: The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:CUSTom command tree.
  • .data: The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa command tree.
  • .endpoint: The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ENDPoint command tree.
  • .err8b10b: The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ERR8B10B command tree.
  • .errtype: The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ERRTYPE command.
  • .handshaketype: The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:HANDSHAKEType command.
  • .headertype: The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:HEADERTYPe command.
  • .keypadtype: The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:KEYPADTYPe command.
  • .lane: The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:LANE command.
  • .ordered: The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ORDered command tree.
  • .packettype: The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:PACKETTYPe command.
  • .packet: The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:PACKet command tree.
  • .sofframenumber: The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SOFFRAMENUMber command.
  • .specialtype: The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPECIALType command.
  • .split: The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT command tree.
  • .tokentype: The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:TOKENType command.
  • .usb3g2character: The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:USB3G2CHARacter command.

SearchSearchItemTriggerABusArinc429a

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A? query and raise an AssertionError if the returned value does not match value.
Properties
  • .condition: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:CONDition command.
  • .data: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:DATa command tree.
  • .errtype: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:ERRTYPe command.
  • .label: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:LABel command tree.
  • .sdi: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:SDI command tree.
  • .ssm: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:SSM command tree.

condition property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:CONDition command.

Description
  • This command specifies a field or condition for an ARINC429 bus to search on. The search number is specified by x. Note: SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:ERRTYPe
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:CONDition? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:CONDition? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:CONDition value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:CONDition {SOW|LABel|DATa|LABELANDDATA|EOW|ERRor}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:CONDition?
Info
  • SOW specifies a search for the first bit of a word.
  • LABel specifies a search for a matching label.
  • DATa specifies a search for matching packet data fields.
  • LABELANDDATA specifies a search for a matching label and matching packet data field(s).
  • EOW specifies a search for the 32nd bit of a word.
  • ERRor specifies a search for a specified error condition.

data property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:DATa command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:DATa? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:DATa? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .hivalue: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:DATa:HIVALue command.
  • .qualifier: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:DATa:QUALifier command.
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:DATa:VALue command.

errtype property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:ERRTYPe command.

Description
  • This command sets or queries the error type when searching on an ARINC429 bus signal. The search number is specified by x. The search condition must be set to ERRor.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:ERRTYPe? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:ERRTYPe? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:ERRTYPe value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:ERRTYPe {ANY|PARity|WORD|GAP}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:ERRTYPe?
Info
  • ANY sets the error type to match any of the other available error types.
  • PARity sets the error type to match on parity errors (parity value results in even parity count for a word).
  • WORD sets the error type to match on word errors (any unframed or unknown decode data).
  • GAP sets the error type to match on gap violations (less than 4 bits idle time between two packets on the bus).

label property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:LABel command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:LABel? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:LABel? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .hivalue: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:LABel:HIVALue command.
  • .qualifier: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:LABel:QUALifier command.
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:LABel:VALue command.

sdi property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:SDI command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:SDI? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:SDI? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:SDI:VALue command.

ssm property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:SSM command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:SSM? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:SSM? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:SSM:VALue command.

SearchSearchItemTriggerABusArinc429aCondition

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:CONDition command.

Description
  • This command specifies a field or condition for an ARINC429 bus to search on. The search number is specified by x. Note: SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:ERRTYPe
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:CONDition? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:CONDition? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:CONDition value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:CONDition {SOW|LABel|DATa|LABELANDDATA|EOW|ERRor}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:CONDition?
Info
  • SOW specifies a search for the first bit of a word.
  • LABel specifies a search for a matching label.
  • DATa specifies a search for matching packet data fields.
  • LABELANDDATA specifies a search for a matching label and matching packet data field(s).
  • EOW specifies a search for the 32nd bit of a word.
  • ERRor specifies a search for a specified error condition.

SearchSearchItemTriggerABusArinc429aData

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:DATa command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:DATa? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:DATa? query and raise an AssertionError if the returned value does not match value.
Properties
  • .hivalue: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:DATa:HIVALue command.
  • .qualifier: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:DATa:QUALifier command.
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:DATa:VALue command.

hivalue property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:DATa:HIVALue command.

Description
  • This command sets or queries the high value when searching on an ARINC429 data field. The search number is specified by x. The search condition must be set to DATa or LABELANDDATA, and the data qualifier must be INrange or OUTrange.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:DATa:HIVALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:DATa:HIVALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:DATa:HIVALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:DATa:HIVALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:DATa:HIVALue?
Info
  • <QString> is the label value.

qualifier property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:DATa:QUALifier command.

Description
  • This command sets or queries the qualifier to be used when searching on data in the DATA field for an ARINC429 bus signal. The search number is specified by x. The search condition must be set to DATa or LABELANDDATA. Note: The search qualifier only applies to the bits defined as the data field via the bus data field format specifier (using
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:DATa:QUALifier? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:DATa:QUALifier? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:DATa:QUALifier value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:DATa:QUALifier {EQual|UNEQual|LESSthan|MOREthan|LESSEQual|MOREEQual|INrange|OUTrange}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:DATa:QUALifier?
Info
  • EQual sets the data qualifier to equal.
  • UNEQual sets the data qualifier to unequal.
  • LESSthan sets the data qualifier to less than.
  • MOREthan sets the data qualifier to more than.
  • LESSEQual sets the data qualifier to less equal.
  • MOREEQual sets the data qualifier to more equal.
  • INrange sets the data qualifier to in range.
  • OUTrange sets the data qualifier to out of range.

value property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:DATa:VALue command.

Description
  • This command sets or queries the low value when searching on an ARINC429 data field. The search number is specified by x. The search condition must be set to DATa or LABELANDDATA.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:DATa:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:DATa:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:DATa:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:DATa:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:DATa:VALue?
Info
  • <QString> is the label value.

SearchSearchItemTriggerABusArinc429aDataHivalue

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:DATa:HIVALue command.

Description
  • This command sets or queries the high value when searching on an ARINC429 data field. The search number is specified by x. The search condition must be set to DATa or LABELANDDATA, and the data qualifier must be INrange or OUTrange.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:DATa:HIVALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:DATa:HIVALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:DATa:HIVALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:DATa:HIVALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:DATa:HIVALue?
Info
  • <QString> is the label value.

SearchSearchItemTriggerABusArinc429aDataQualifier

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:DATa:QUALifier command.

Description
  • This command sets or queries the qualifier to be used when searching on data in the DATA field for an ARINC429 bus signal. The search number is specified by x. The search condition must be set to DATa or LABELANDDATA. Note: The search qualifier only applies to the bits defined as the data field via the bus data field format specifier (using
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:DATa:QUALifier? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:DATa:QUALifier? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:DATa:QUALifier value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:DATa:QUALifier {EQual|UNEQual|LESSthan|MOREthan|LESSEQual|MOREEQual|INrange|OUTrange}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:DATa:QUALifier?
Info
  • EQual sets the data qualifier to equal.
  • UNEQual sets the data qualifier to unequal.
  • LESSthan sets the data qualifier to less than.
  • MOREthan sets the data qualifier to more than.
  • LESSEQual sets the data qualifier to less equal.
  • MOREEQual sets the data qualifier to more equal.
  • INrange sets the data qualifier to in range.
  • OUTrange sets the data qualifier to out of range.

SearchSearchItemTriggerABusArinc429aDataValue

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:DATa:VALue command.

Description
  • This command sets or queries the low value when searching on an ARINC429 data field. The search number is specified by x. The search condition must be set to DATa or LABELANDDATA.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:DATa:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:DATa:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:DATa:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:DATa:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:DATa:VALue?
Info
  • <QString> is the label value.

SearchSearchItemTriggerABusArinc429aErrtype

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:ERRTYPe command.

Description
  • This command sets or queries the error type when searching on an ARINC429 bus signal. The search number is specified by x. The search condition must be set to ERRor.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:ERRTYPe? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:ERRTYPe? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:ERRTYPe value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:ERRTYPe {ANY|PARity|WORD|GAP}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:ERRTYPe?
Info
  • ANY sets the error type to match any of the other available error types.
  • PARity sets the error type to match on parity errors (parity value results in even parity count for a word).
  • WORD sets the error type to match on word errors (any unframed or unknown decode data).
  • GAP sets the error type to match on gap violations (less than 4 bits idle time between two packets on the bus).

SearchSearchItemTriggerABusArinc429aLabel

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:LABel command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:LABel? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:LABel? query and raise an AssertionError if the returned value does not match value.
Properties
  • .hivalue: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:LABel:HIVALue command.
  • .qualifier: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:LABel:QUALifier command.
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:LABel:VALue command.

hivalue property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:LABel:HIVALue command.

Description
  • This command sets or queries the high value when searching on an ARINC429 label field. The search number is specified by x. The search condition must be set to LABel, and the label qualifier must be INrange or OUTrange.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:LABel:HIVALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:LABel:HIVALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:LABel:HIVALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:LABel:HIVALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:LABel:HIVALue?
Info
  • <QString> is the label value.

qualifier property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:LABel:QUALifier command.

Description
  • This command sets or queries the qualifier to be used when searching on label data for an ARINC429 bus signal. The search number is specified by x. The search condition must be set to LABel or LABELANDDATA. Note: If the search condition is set to LABELANDDATA, the label qualifier will be locked to Equal until the search condition is changed again.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:LABel:QUALifier? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:LABel:QUALifier? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:LABel:QUALifier value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:LABel:QUALifier {EQual|UNEQual|LESSthan|MOREthan|LESSEQual|MOREEQual|INrange|OUTrange}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:LABel:QUALifier?
Info
  • EQual sets the data qualifier to equal.
  • UNEQual sets the data qualifier to unequal.
  • LESSthan sets the data qualifier to less than.
  • MOREthan sets the data qualifier to more than.
  • LESSEQual sets the data qualifier to less equal.
  • MOREEQual sets the data qualifier to more equal.
  • INrange sets the data qualifier to in range.
  • OUTrange sets the data qualifier to out of range.

value property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:LABel:VALue command.

Description
  • This command sets or queries the low value when searching on an ARINC429 label field. The search number is specified by x. The search condition must be set to LABel or LABELANDDATA.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:LABel:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:LABel:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:LABel:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:LABel:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:LABel:VALue?
Info
  • <QString> is the label value.

SearchSearchItemTriggerABusArinc429aLabelHivalue

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:LABel:HIVALue command.

Description
  • This command sets or queries the high value when searching on an ARINC429 label field. The search number is specified by x. The search condition must be set to LABel, and the label qualifier must be INrange or OUTrange.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:LABel:HIVALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:LABel:HIVALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:LABel:HIVALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:LABel:HIVALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:LABel:HIVALue?
Info
  • <QString> is the label value.

SearchSearchItemTriggerABusArinc429aLabelQualifier

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:LABel:QUALifier command.

Description
  • This command sets or queries the qualifier to be used when searching on label data for an ARINC429 bus signal. The search number is specified by x. The search condition must be set to LABel or LABELANDDATA. Note: If the search condition is set to LABELANDDATA, the label qualifier will be locked to Equal until the search condition is changed again.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:LABel:QUALifier? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:LABel:QUALifier? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:LABel:QUALifier value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:LABel:QUALifier {EQual|UNEQual|LESSthan|MOREthan|LESSEQual|MOREEQual|INrange|OUTrange}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:LABel:QUALifier?
Info
  • EQual sets the data qualifier to equal.
  • UNEQual sets the data qualifier to unequal.
  • LESSthan sets the data qualifier to less than.
  • MOREthan sets the data qualifier to more than.
  • LESSEQual sets the data qualifier to less equal.
  • MOREEQual sets the data qualifier to more equal.
  • INrange sets the data qualifier to in range.
  • OUTrange sets the data qualifier to out of range.

SearchSearchItemTriggerABusArinc429aLabelValue

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:LABel:VALue command.

Description
  • This command sets or queries the low value when searching on an ARINC429 label field. The search number is specified by x. The search condition must be set to LABel or LABELANDDATA.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:LABel:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:LABel:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:LABel:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:LABel:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:LABel:VALue?
Info
  • <QString> is the label value.

SearchSearchItemTriggerABusArinc429aSdi

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:SDI command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:SDI? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:SDI? query and raise an AssertionError if the returned value does not match value.
Properties
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:SDI:VALue command.

value property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:SDI:VALue command.

Description
  • This command sets or queries the label when searching on an ARINC429 SDI field. The search number is specified by x. The search condition must be set to DATa or LABELANDDATA, and the data format must be set to DATA. Note: The SDI field is only present when the selected data field format is DATA (using BUS:B<x>:ARINC429A:DATAFORmat). Also, the stored QString is reset to its default value whenever the data field format is changed.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:SDI:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:SDI:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:SDI:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:SDI:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:SDI:VALue?
Info
  • <QString> is the label value.

SearchSearchItemTriggerABusArinc429aSdiValue

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:SDI:VALue command.

Description
  • This command sets or queries the label when searching on an ARINC429 SDI field. The search number is specified by x. The search condition must be set to DATa or LABELANDDATA, and the data format must be set to DATA. Note: The SDI field is only present when the selected data field format is DATA (using BUS:B<x>:ARINC429A:DATAFORmat). Also, the stored QString is reset to its default value whenever the data field format is changed.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:SDI:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:SDI:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:SDI:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:SDI:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:SDI:VALue?
Info
  • <QString> is the label value.

SearchSearchItemTriggerABusArinc429aSsm

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:SSM command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:SSM? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:SSM? query and raise an AssertionError if the returned value does not match value.
Properties
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:SSM:VALue command.

value property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:SSM:VALue command.

Description
  • This command sets or queries the label when searching on an ARINC429 SSM field. The search number is specified by x. The search condition must be set to DATa or LABELANDDATA, and the data format must be set to DATA or SDIDATA.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:SSM:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:SSM:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:SSM:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:SSM:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:SSM:VALue?

SearchSearchItemTriggerABusArinc429aSsmValue

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:SSM:VALue command.

Description
  • This command sets or queries the label when searching on an ARINC429 SSM field. The search number is specified by x. The search condition must be set to DATa or LABELANDDATA, and the data format must be set to DATA or SDIDATA.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:SSM:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:SSM:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:SSM:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:SSM:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:SSM:VALue?

SearchSearchItemTriggerABusAudio

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio? query and raise an AssertionError if the returned value does not match value.
Properties
  • .condition: The SEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:CONDition command.
  • .data: The SEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:DATa command tree.

condition property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:CONDition command.

Description
  • This command sets or queries the condition (word select / frame sync, or matching data) to be used when searching on an audio bus signal. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:CONDition? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:CONDition? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:CONDition value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:CONDition {SOF|DATa}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:CONDition?
Info
  • SOF specifies to search on a word select or start of frame (depending on Audio Type).
  • DATa specifies to search on matching data.

data property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:DATa command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:DATa? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:DATa? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .hitdmvalue: The SEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:DATa:HITDMVALue command.
  • .hivalue: The SEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:DATa:HIVALue command.
  • .offset: The SEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:DATa:OFFSet command.
  • .qualifier: The SEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:DATa:QUALifier command.
  • .tdmvalue: The SEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:DATa:TDMVALue command.
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:DATa:VALue command.
  • .word: The SEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:DATa:WORD command.

SearchSearchItemTriggerABusAudioCondition

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:CONDition command.

Description
  • This command sets or queries the condition (word select / frame sync, or matching data) to be used when searching on an audio bus signal. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:CONDition? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:CONDition? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:CONDition value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:CONDition {SOF|DATa}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:CONDition?
Info
  • SOF specifies to search on a word select or start of frame (depending on Audio Type).
  • DATa specifies to search on matching data.

SearchSearchItemTriggerABusAudioData

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:DATa command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:DATa? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:DATa? query and raise an AssertionError if the returned value does not match value.
Properties
  • .hitdmvalue: The SEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:DATa:HITDMVALue command.
  • .hivalue: The SEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:DATa:HIVALue command.
  • .offset: The SEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:DATa:OFFSet command.
  • .qualifier: The SEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:DATa:QUALifier command.
  • .tdmvalue: The SEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:DATa:TDMVALue command.
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:DATa:VALue command.
  • .word: The SEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:DATa:WORD command.

hitdmvalue property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:DATa:HITDMVALue command.

Description
  • This command sets or queries the binary data string for the high data word to be used when searching on an TDM audio bus signal. The search condition must be set to DATa using SEARCH:SEARCH:TRIGger:A:BUS:AUDio:CONDition.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:DATa:HITDMVALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:DATa:HITDMVALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:DATa:HITDMVALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:DATa:HITDMVALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:DATa:HITDMVALue?
Info
  • <QString> is the binary data string for the high data word to be used when searching on an TDM audio bus signal.

hivalue property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:DATa:HIVALue command.

Description
  • This command sets or queries the binary data string for the high data word to be used when searching on an audio bus signal. The search condition must be set to DATa using :SEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:CONDition. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:DATa:HIVALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:DATa:HIVALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:DATa:HIVALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:DATa:HIVALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:DATa:HIVALue?
Info
  • <QString> specifies the upper word value.

offset property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:DATa:OFFSet command.

Description
  • This command sets or queries the data offset value (TDM channel) to be used when searching on a TDM type audio bus signal. The search condition must be set to DATa using S EARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:TDM:CONDition. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:DATa:OFFSet? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:DATa:OFFSet? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:DATa:OFFSet value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:DATa:OFFSet <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:DATa:OFFSet?
Info
  • <NR1> is the data offset value.

qualifier property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:DATa:QUALifier command.

Description
  • This command sets or queries the qualifier to be used when searching on an audio bus signal. The search condition must be set to DATa using SEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:{NONTdm|TDM}:CONDition. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:DATa:QUALifier? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:DATa:QUALifier? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:DATa:QUALifier value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:DATa:QUALifier {EQual|UNEQual|LESSthan|MOREthan|LESSEQual|MOREEQual|INrange|OUTrange}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:DATa:QUALifier?
Info
  • LESSthan sets the qualifier to less than.
  • MOREthan sets the qualifier to greater than.
  • EQual sets the qualifier to equal.
  • UNEQual sets the qualifier to not equal.
  • LESSEQual sets the qualifier to less than or equal.
  • MOREEQual sets the qualifier to greater than or equal.
  • INrange sets the qualifier to in range.
  • OUTrange sets the qualifier to out of range.

tdmvalue property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:DATa:TDMVALue command.

Description
  • This command sets or queries the binary data string for the single or low data word to be used when searching on an TDM audio bus signal. The search condition must be set to DATA using SEARCH:SEARCH:TRIGger:A:BUS:AUDio:CONDition.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:DATa:TDMVALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:DATa:TDMVALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:DATa:TDMVALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:DATa:TDMVALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:DATa:TDMVALue?
Info
  • <QString> is the binary data string for the single or low data word to be used when searching on an TDM audio bus signal.

value property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:DATa:VALue command.

Description
  • This command sets or queries the binary data string for the single or low data word to be used when searching on an audio bus signal. The search condition must be set to DATA using SEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:{NONTdm|TDM}:CONDition. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:DATa:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:DATa:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:DATa:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:DATa:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:DATa:VALue?
Info
  • <QString> is the lower word value.

word property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:DATa:WORD command.

Description
  • This command sets or queries the alignment of the data (left, right or either) to be used when searching on a non-TDM type audio bus signal. The search condition must be set to DATA using SEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:NONTdm:CONDition. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:DATa:WORD? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:DATa:WORD? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:DATa:WORD value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:DATa:WORD {EITher|LEFt|RIGht}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:DATa:WORD?
Info
  • EITher aligns the data to either left or right.
  • LEFt aligns the data to the left.
  • RIGht aligns the data to the right.

SearchSearchItemTriggerABusAudioDataHitdmvalue

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:DATa:HITDMVALue command.

Description
  • This command sets or queries the binary data string for the high data word to be used when searching on an TDM audio bus signal. The search condition must be set to DATa using SEARCH:SEARCH:TRIGger:A:BUS:AUDio:CONDition.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:DATa:HITDMVALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:DATa:HITDMVALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:DATa:HITDMVALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:DATa:HITDMVALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:DATa:HITDMVALue?
Info
  • <QString> is the binary data string for the high data word to be used when searching on an TDM audio bus signal.

SearchSearchItemTriggerABusAudioDataHivalue

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:DATa:HIVALue command.

Description
  • This command sets or queries the binary data string for the high data word to be used when searching on an audio bus signal. The search condition must be set to DATa using :SEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:CONDition. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:DATa:HIVALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:DATa:HIVALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:DATa:HIVALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:DATa:HIVALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:DATa:HIVALue?
Info
  • <QString> specifies the upper word value.

SearchSearchItemTriggerABusAudioDataOffset

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:DATa:OFFSet command.

Description
  • This command sets or queries the data offset value (TDM channel) to be used when searching on a TDM type audio bus signal. The search condition must be set to DATa using S EARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:TDM:CONDition. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:DATa:OFFSet? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:DATa:OFFSet? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:DATa:OFFSet value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:DATa:OFFSet <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:DATa:OFFSet?
Info
  • <NR1> is the data offset value.

SearchSearchItemTriggerABusAudioDataQualifier

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:DATa:QUALifier command.

Description
  • This command sets or queries the qualifier to be used when searching on an audio bus signal. The search condition must be set to DATa using SEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:{NONTdm|TDM}:CONDition. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:DATa:QUALifier? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:DATa:QUALifier? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:DATa:QUALifier value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:DATa:QUALifier {EQual|UNEQual|LESSthan|MOREthan|LESSEQual|MOREEQual|INrange|OUTrange}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:DATa:QUALifier?
Info
  • LESSthan sets the qualifier to less than.
  • MOREthan sets the qualifier to greater than.
  • EQual sets the qualifier to equal.
  • UNEQual sets the qualifier to not equal.
  • LESSEQual sets the qualifier to less than or equal.
  • MOREEQual sets the qualifier to greater than or equal.
  • INrange sets the qualifier to in range.
  • OUTrange sets the qualifier to out of range.

SearchSearchItemTriggerABusAudioDataTdmvalue

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:DATa:TDMVALue command.

Description
  • This command sets or queries the binary data string for the single or low data word to be used when searching on an TDM audio bus signal. The search condition must be set to DATA using SEARCH:SEARCH:TRIGger:A:BUS:AUDio:CONDition.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:DATa:TDMVALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:DATa:TDMVALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:DATa:TDMVALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:DATa:TDMVALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:DATa:TDMVALue?
Info
  • <QString> is the binary data string for the single or low data word to be used when searching on an TDM audio bus signal.

SearchSearchItemTriggerABusAudioDataValue

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:DATa:VALue command.

Description
  • This command sets or queries the binary data string for the single or low data word to be used when searching on an audio bus signal. The search condition must be set to DATA using SEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:{NONTdm|TDM}:CONDition. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:DATa:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:DATa:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:DATa:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:DATa:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:DATa:VALue?
Info
  • <QString> is the lower word value.

SearchSearchItemTriggerABusAudioDataWord

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:DATa:WORD command.

Description
  • This command sets or queries the alignment of the data (left, right or either) to be used when searching on a non-TDM type audio bus signal. The search condition must be set to DATA using SEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:NONTdm:CONDition. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:DATa:WORD? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:DATa:WORD? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:DATa:WORD value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:DATa:WORD {EITher|LEFt|RIGht}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:DATa:WORD?
Info
  • EITher aligns the data to either left or right.
  • LEFt aligns the data to the left.
  • RIGht aligns the data to the right.

SearchSearchItemTriggerABusAutoethernet

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet? query and raise an AssertionError if the returned value does not match value.
Info
  • SEARCH<x> is the Search number.
Properties
  • .condition: The SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:CONDition command.
  • .data: The SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:DATa command tree.
  • .errortype: The SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:ERRORTYPe command.
  • .ether: The SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:ETHer command tree.
  • .ipheader: The SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:IPHeader command tree.
  • .mac: The SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:MAC command tree.
  • .payload: The SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:PAYLoad command tree.
  • .qtag: The SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:QTAG command tree.
  • .qualifier: The SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:QUALifier command.
  • .tbt1s: The SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:TBT1s command tree.
  • .tcpheader: The SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:TCPHeader command tree.

condition property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:CONDition command.

Description
  • This command sets or queries the field or condition for which to search an AutoEthernet.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:CONDition? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:CONDition? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:CONDition value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:CONDition {SSD|SFD|MACADDRess|MACLENgth|IPHeader|TCPHeader|DATa|EOP|FCSError|QTAG}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:CONDition?
Info
  • SEARCH<x> is the Search number.
  • SSD specifies to search for Start of frame.
  • SFD specifies to search for Start of frame delimiter.
  • MACADDRess specifies to search for MAC addresses field.
  • MACLENgth specifies to search for MAC length/type field.
  • IPHeader specifies to search for IP header field.
  • TCPHeader specifies to search for TCP header field.
  • DATa specifies to search for TCP/IPv4 or MAC protocol client data field.
  • EOP specifies to search for End of Packet field.
  • FCSError specifies to search for Frame Check Sequence Error (CRC) field.
  • QTAG specifies to search for IEEE 802.1Q (VLAN) control information field.

data property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:DATa command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:DATa? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:DATa? query and raise an AssertionError if the returned value does not match value.
Info
  • SEARCH<x> is the Search number.
Sub-properties
  • .hivalue: The SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:DATa:HIVALue command.
  • .offset: The SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:DATa:OFFSet command.
  • .size: The SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:DATa:SIZe command.
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:DATa:VALue command.

errortype property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:ERRORTYPe command.

Description
  • This command sets the Error Type to be used when triggering on an Auto Ethernet bus signal when speed is selected as 10 Base-T1S and packet view is ON.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:ERRORTYPe? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:ERRORTYPe? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:ERRORTYPe value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:ERRORTYPe {CRC|ESDERR|ESDJAB|CHECKSUM|ANY}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:ERRORTYPe?
Info
  • SEARCH<x> is the Search number.
  • CRC specifies the error type as CRC errors.
  • ESDERR specifies the error type as ESDERR symbol.
  • ESDJAB specifies the error type as ESDJAB symbol.
  • CHECKSUM specifies the error type as checksum errors.
  • ANYspecifies the error type as any type of error.

ether property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:ETHer command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:ETHer? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:ETHer? query and raise an AssertionError if the returned value does not match value.
Info
  • SEARCH<x> is the Search number.
Sub-properties
  • .header: The SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:ETHer:HEADer command.
  • .type: The SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:ETHer:TYPe command.

ipheader property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:IPHeader command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:IPHeader? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:IPHeader? query and raise an AssertionError if the returned value does not match value.
Info
  • SEARCH<x> is the Search number. is a quoted string of up to 32 characters that sets the IP address, where the allowable characters are 0, 1, and X. The bits specified in the quoted string replace the least significant bits (LSB), leaving any unspecified upper bits unchanged.
Sub-properties
  • .destinationaddr: The SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:IPHeader:DESTinationaddr command tree.
  • .protocol: The SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:IPHeader:PROTOcol command tree.
  • .sourceaddr: The SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:IPHeader:SOUrceaddr command tree.

mac property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:MAC command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:MAC? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:MAC? query and raise an AssertionError if the returned value does not match value.
Info
  • SEARCH<x> is the Search number. is a quoted string of up to 48 characters where the allowable characters are 0, 1, and X. The bits specified in the quoted string replace the least significant bits (LSB), leaving any unspecified upper bits unchanged.
Sub-properties
  • .address: The SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:MAC:ADDRess command tree.
  • .length: The SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:MAC:LENgth command tree.

payload property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:PAYLoad command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:PAYLoad? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:PAYLoad? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .size: The SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:PAYLoad:SIZe command.
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:PAYLoad:VALue command.

qtag property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:QTAG command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:QTAG? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:QTAG? query and raise an AssertionError if the returned value does not match value.
Info
  • SEARCH<x> is the Search number.
Sub-properties
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:QTAG:VALue command.

qualifier property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:QUALifier command.

Description
  • This command sets or queries the qualifier to be used when searching on an AutoEthernet bus signal. The search condition must be set to Client Data or MAC Length/Type.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:QUALifier? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:QUALifier? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:QUALifier value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:QUALifier {LESSthan|MOREthan|EQual|UNEQual|LESSEQual|MOREEQual|INrange|OUTrange}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:QUALifier?
Info
  • SEARCH<x> is the Search number.
  • LESSthan sets the qualifier to less than.
  • MOREthan sets the qualifier to greater than.
  • EQual sets the qualifier to equal.
  • UNEQual sets the qualifier to not equal.
  • LESSEQual sets the qualifier to less than or equal.
  • MOREEQual sets the qualifier to greater than or equal.
  • INrange sets the qualifier to in range.
  • OUTrange sets the qualifier to out of range.

tbt1s property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:TBT1s command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:TBT1s? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:TBT1s? query and raise an AssertionError if the returned value does not match value.
Info
  • SEARCH<x> is the Search number.
Sub-properties
  • .data: The SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:TBT1s:DATa command tree.

tcpheader property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:TCPHeader command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:TCPHeader? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:TCPHeader? query and raise an AssertionError if the returned value does not match value.
Info
  • SEARCH<x> is the Search number.
Sub-properties
  • .acknum: The SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:TCPHeader:ACKnum command tree.
  • .destinationport: The SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:TCPHeader:DESTinationport command tree.
  • .seqnum: The SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:TCPHeader:SEQnum command tree.
  • .sourceport: The SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:TCPHeader:SOUrceport command tree.

SearchSearchItemTriggerABusAutoethernetCondition

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:CONDition command.

Description
  • This command sets or queries the field or condition for which to search an AutoEthernet.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:CONDition? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:CONDition? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:CONDition value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:CONDition {SSD|SFD|MACADDRess|MACLENgth|IPHeader|TCPHeader|DATa|EOP|FCSError|QTAG}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:CONDition?
Info
  • SEARCH<x> is the Search number.
  • SSD specifies to search for Start of frame.
  • SFD specifies to search for Start of frame delimiter.
  • MACADDRess specifies to search for MAC addresses field.
  • MACLENgth specifies to search for MAC length/type field.
  • IPHeader specifies to search for IP header field.
  • TCPHeader specifies to search for TCP header field.
  • DATa specifies to search for TCP/IPv4 or MAC protocol client data field.
  • EOP specifies to search for End of Packet field.
  • FCSError specifies to search for Frame Check Sequence Error (CRC) field.
  • QTAG specifies to search for IEEE 802.1Q (VLAN) control information field.

SearchSearchItemTriggerABusAutoethernetData

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:DATa command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:DATa? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:DATa? query and raise an AssertionError if the returned value does not match value.
Info
  • SEARCH<x> is the Search number.
Properties
  • .hivalue: The SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:DATa:HIVALue command.
  • .offset: The SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:DATa:OFFSet command.
  • .size: The SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:DATa:SIZe command.
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:DATa:VALue command.

hivalue property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:DATa:HIVALue command.

Description
  • This command sets or queries the binary data value to be used when searching on an AutoEthernet bus signal. The search condition must be set to DATA and the data qualifier to inside or outside range.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:DATa:HIVALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:DATa:HIVALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:DATa:HIVALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:DATa:HIVALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:DATa:HIVALue?
Info
  • SEARCH<x> is the Search number.
  • <QString> specifies the binary data value to be used when searching on an AutoEthernet bus signal.

offset property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:DATa:OFFSet command.

Description
  • This command sets or queries the data offset value, in bytes, to use when searching on the AutoEthernet data field. The search condition needs to be set to DATa.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:DATa:OFFSet? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:DATa:OFFSet? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:DATa:OFFSet value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:DATa:OFFSet <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:DATa:OFFSet?
Info
  • SEARCH<x> is the Search number.
  • NR1 sets the data offset value, in bytes. It is an integer value whose minimum and default values are -1 (don’t care) and maximum is 1,499.

size property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:DATa:SIZe command.

Description
  • This command sets or queries the length of the data string, in bytes, to use when searching on the AutoEthernet bus signal. The search condition needs to be set to DATa.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:DATa:SIZe? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:DATa:SIZe? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:DATa:SIZe value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:DATa:SIZe <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:DATa:SIZe?
Info
  • SEARCH<x> is the Search number.
  • NR1 sets the data length, in bytes. It is an integer value whose minimum and default values are 1, and the maximum value is 16.

value property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:DATa:VALue command.

Description
  • This command sets or queries the binary value to use when searching on the AutoEthernet bus signal. The search condition needs to be set to DATa.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:DATa:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:DATa:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:DATa:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:DATa:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:DATa:VALue?
Info
  • SEARCH<x> is the Search number.
  • <QString> is a quoted string where the allowable characters are 0, 1, and X. The allowable number of characters depends on the setting for size (using SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:DATa:SIZe). The bits specified in the quoted string replace the least significant bits (LSB), leaving any unspecified upper bits unchanged.

SearchSearchItemTriggerABusAutoethernetDataHivalue

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:DATa:HIVALue command.

Description
  • This command sets or queries the binary data value to be used when searching on an AutoEthernet bus signal. The search condition must be set to DATA and the data qualifier to inside or outside range.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:DATa:HIVALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:DATa:HIVALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:DATa:HIVALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:DATa:HIVALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:DATa:HIVALue?
Info
  • SEARCH<x> is the Search number.
  • <QString> specifies the binary data value to be used when searching on an AutoEthernet bus signal.

SearchSearchItemTriggerABusAutoethernetDataOffset

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:DATa:OFFSet command.

Description
  • This command sets or queries the data offset value, in bytes, to use when searching on the AutoEthernet data field. The search condition needs to be set to DATa.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:DATa:OFFSet? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:DATa:OFFSet? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:DATa:OFFSet value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:DATa:OFFSet <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:DATa:OFFSet?
Info
  • SEARCH<x> is the Search number.
  • NR1 sets the data offset value, in bytes. It is an integer value whose minimum and default values are -1 (don’t care) and maximum is 1,499.

SearchSearchItemTriggerABusAutoethernetDataSize

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:DATa:SIZe command.

Description
  • This command sets or queries the length of the data string, in bytes, to use when searching on the AutoEthernet bus signal. The search condition needs to be set to DATa.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:DATa:SIZe? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:DATa:SIZe? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:DATa:SIZe value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:DATa:SIZe <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:DATa:SIZe?
Info
  • SEARCH<x> is the Search number.
  • NR1 sets the data length, in bytes. It is an integer value whose minimum and default values are 1, and the maximum value is 16.

SearchSearchItemTriggerABusAutoethernetDataValue

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:DATa:VALue command.

Description
  • This command sets or queries the binary value to use when searching on the AutoEthernet bus signal. The search condition needs to be set to DATa.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:DATa:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:DATa:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:DATa:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:DATa:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:DATa:VALue?
Info
  • SEARCH<x> is the Search number.
  • <QString> is a quoted string where the allowable characters are 0, 1, and X. The allowable number of characters depends on the setting for size (using SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:DATa:SIZe). The bits specified in the quoted string replace the least significant bits (LSB), leaving any unspecified upper bits unchanged.

SearchSearchItemTriggerABusAutoethernetErrortype

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:ERRORTYPe command.

Description
  • This command sets the Error Type to be used when triggering on an Auto Ethernet bus signal when speed is selected as 10 Base-T1S and packet view is ON.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:ERRORTYPe? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:ERRORTYPe? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:ERRORTYPe value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:ERRORTYPe {CRC|ESDERR|ESDJAB|CHECKSUM|ANY}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:ERRORTYPe?
Info
  • SEARCH<x> is the Search number.
  • CRC specifies the error type as CRC errors.
  • ESDERR specifies the error type as ESDERR symbol.
  • ESDJAB specifies the error type as ESDJAB symbol.
  • CHECKSUM specifies the error type as checksum errors.
  • ANYspecifies the error type as any type of error.

SearchSearchItemTriggerABusAutoethernetEther

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:ETHer command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:ETHer? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:ETHer? query and raise an AssertionError if the returned value does not match value.
Info
  • SEARCH<x> is the Search number.
Properties
  • .header: The SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:ETHer:HEADer command.
  • .type: The SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:ETHer:TYPe command.

header property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:ETHer:HEADer command.

Description
  • This command sets the Header Type to be used when triggering for ether type on an Auto Ethernet bus signal when speed is selected as 10 Base-T1S and packet view is ON.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:ETHer:HEADer? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:ETHer:HEADer? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:ETHer:HEADer value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:ETHer:HEADer {TCP|ICMP|UDP}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:ETHer:HEADer?
Info
  • SEARCH<x> is the Search number.
  • TCP specifies the header type as TCP header.
  • ICMP specifies the header type as ICMP header.
  • UDP specifies the header type as UDP header.

type property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:ETHer:TYPe command.

Description
  • This command sets the Ether Type to be used when triggering on an Auto Ethernet bus signal when speed is selected as 10 Base-T1S and packet view is ON.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:ETHer:TYPe? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:ETHer:TYPe? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:ETHer:TYPe value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:ETHer:TYPe {IPV4|IPV6}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:ETHer:TYPe?
Info
  • SEARCH<x> is the Search number.
  • IPV4 specifies the ether type as IPv4.
  • IPV6 specifies the ether type as IPv6.

SearchSearchItemTriggerABusAutoethernetEtherHeader

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:ETHer:HEADer command.

Description
  • This command sets the Header Type to be used when triggering for ether type on an Auto Ethernet bus signal when speed is selected as 10 Base-T1S and packet view is ON.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:ETHer:HEADer? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:ETHer:HEADer? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:ETHer:HEADer value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:ETHer:HEADer {TCP|ICMP|UDP}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:ETHer:HEADer?
Info
  • SEARCH<x> is the Search number.
  • TCP specifies the header type as TCP header.
  • ICMP specifies the header type as ICMP header.
  • UDP specifies the header type as UDP header.

SearchSearchItemTriggerABusAutoethernetEtherType

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:ETHer:TYPe command.

Description
  • This command sets the Ether Type to be used when triggering on an Auto Ethernet bus signal when speed is selected as 10 Base-T1S and packet view is ON.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:ETHer:TYPe? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:ETHer:TYPe? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:ETHer:TYPe value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:ETHer:TYPe {IPV4|IPV6}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:ETHer:TYPe?
Info
  • SEARCH<x> is the Search number.
  • IPV4 specifies the ether type as IPv4.
  • IPV6 specifies the ether type as IPv6.

SearchSearchItemTriggerABusAutoethernetIpheader

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:IPHeader command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:IPHeader? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:IPHeader? query and raise an AssertionError if the returned value does not match value.
Info
  • SEARCH<x> is the Search number. is a quoted string of up to 32 characters that sets the IP address, where the allowable characters are 0, 1, and X. The bits specified in the quoted string replace the least significant bits (LSB), leaving any unspecified upper bits unchanged.
Properties
  • .destinationaddr: The SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:IPHeader:DESTinationaddr command tree.
  • .protocol: The SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:IPHeader:PROTOcol command tree.
  • .sourceaddr: The SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:IPHeader:SOUrceaddr command tree.

destinationaddr property

SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:IPHeader:DESTinationaddr command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:IPHeader:DESTinationaddr? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:IPHeader:DESTinationaddr? query and raise an AssertionError if the returned value does not match value.
Info
  • SEARCH<x> is the Search number. is a quoted string of up to 32 characters that sets the IP address, where the allowable characters are 0, 1, and X. The bits specified in the quoted string replace the least significant bits (LSB), leaving any unspecified upper bits unchanged.
Sub-properties
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:IPHeader:DESTinationaddr:VALue command.

protocol property

SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:IPHeader:PROTOcol command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:IPHeader:PROTOcol? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:IPHeader:PROTOcol? query and raise an AssertionError if the returned value does not match value.
Info
  • SEARCH<x> is the Search number.
Sub-properties
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:IPHeader:PROTOcol:VALue command.

sourceaddr property

SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:IPHeader:SOUrceaddr command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:IPHeader:SOUrceaddr? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:IPHeader:SOUrceaddr? query and raise an AssertionError if the returned value does not match value.
Info
  • SEARCH<x> is the Search number. is a quoted string of up to 32 characters, where the allowable characters are 0, 1, and X. The bits specified in the quoted string replace the least significant bits (LSB), leaving any unspecified upper bits unchanged.
Sub-properties
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:IPHeader:SOUrceaddr:VALue command.

SearchSearchItemTriggerABusAutoethernetIpheaderDestinationaddr

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:IPHeader:DESTinationaddr command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:IPHeader:DESTinationaddr? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:IPHeader:DESTinationaddr? query and raise an AssertionError if the returned value does not match value.
Info
  • SEARCH<x> is the Search number. is a quoted string of up to 32 characters that sets the IP address, where the allowable characters are 0, 1, and X. The bits specified in the quoted string replace the least significant bits (LSB), leaving any unspecified upper bits unchanged.
Properties
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:IPHeader:DESTinationaddr:VALue command.

value property

SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:IPHeader:DESTinationaddr:VALue command.

Description
  • This command sets or queries the binary destination address value to use when searching on an AutoEthernet bus signal. The search condition needs to be set to IPHeader.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:IPHeader:DESTinationaddr:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:IPHeader:DESTinationaddr:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:IPHeader:DESTinationaddr:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:IPHeader:DESTinationaddr:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:IPHeader:DESTinationaddr:VALue?
Info
  • SEARCH<x> is the Search number. is a quoted string of up to 32 characters that sets the IP address, where the allowable characters are 0, 1, and X. The bits specified in the quoted string replace the least significant bits (LSB), leaving any unspecified upper bits unchanged.

SearchSearchItemTriggerABusAutoethernetIpheaderDestinationaddrValue

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:IPHeader:DESTinationaddr:VALue command.

Description
  • This command sets or queries the binary destination address value to use when searching on an AutoEthernet bus signal. The search condition needs to be set to IPHeader.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:IPHeader:DESTinationaddr:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:IPHeader:DESTinationaddr:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:IPHeader:DESTinationaddr:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:IPHeader:DESTinationaddr:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:IPHeader:DESTinationaddr:VALue?
Info
  • SEARCH<x> is the Search number. is a quoted string of up to 32 characters that sets the IP address, where the allowable characters are 0, 1, and X. The bits specified in the quoted string replace the least significant bits (LSB), leaving any unspecified upper bits unchanged.

SearchSearchItemTriggerABusAutoethernetIpheaderProtocol

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:IPHeader:PROTOcol command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:IPHeader:PROTOcol? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:IPHeader:PROTOcol? query and raise an AssertionError if the returned value does not match value.
Info
  • SEARCH<x> is the Search number.
Properties
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:IPHeader:PROTOcol:VALue command.

value property

SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:IPHeader:PROTOcol:VALue command.

Description
  • This command sets or queries the binary protocol value to use when searching on the Ethernet bus signal. The search condition needs to be set to IPHeader.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:IPHeader:PROTOcol:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:IPHeader:PROTOcol:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:IPHeader:PROTOcol:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:IPHeader:PROTOcol:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:IPHeader:PROTOcol:VALue?
Info
  • SEARCH<x> is the Search number.
  • <QString> is a quoted string of up to eight (8) characters where the allowable characters are 0, 1, and X. The bits specified in the quoted string replace the least significant bits (LSB), leaving any unspecified upper bits unchanged.

SearchSearchItemTriggerABusAutoethernetIpheaderProtocolValue

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:IPHeader:PROTOcol:VALue command.

Description
  • This command sets or queries the binary protocol value to use when searching on the Ethernet bus signal. The search condition needs to be set to IPHeader.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:IPHeader:PROTOcol:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:IPHeader:PROTOcol:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:IPHeader:PROTOcol:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:IPHeader:PROTOcol:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:IPHeader:PROTOcol:VALue?
Info
  • SEARCH<x> is the Search number.
  • <QString> is a quoted string of up to eight (8) characters where the allowable characters are 0, 1, and X. The bits specified in the quoted string replace the least significant bits (LSB), leaving any unspecified upper bits unchanged.

SearchSearchItemTriggerABusAutoethernetIpheaderSourceaddr

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:IPHeader:SOUrceaddr command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:IPHeader:SOUrceaddr? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:IPHeader:SOUrceaddr? query and raise an AssertionError if the returned value does not match value.
Info
  • SEARCH<x> is the Search number. is a quoted string of up to 32 characters, where the allowable characters are 0, 1, and X. The bits specified in the quoted string replace the least significant bits (LSB), leaving any unspecified upper bits unchanged.
Properties
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:IPHeader:SOUrceaddr:VALue command.

value property

SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:IPHeader:SOUrceaddr:VALue command.

Description
  • This command sets or queries the binary source address value to use when searching on an AutoEthernet bus signal. The search condition needs to be set to IPHeader.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:IPHeader:SOUrceaddr:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:IPHeader:SOUrceaddr:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:IPHeader:SOUrceaddr:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:IPHeader:SOUrceaddr:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:IPHeader:SOUrceaddr:VALue?
Info
  • SEARCH<x> is the Search number. is a quoted string of up to 32 characters, where the allowable characters are 0, 1, and X. The bits specified in the quoted string replace the least significant bits (LSB), leaving any unspecified upper bits unchanged.

SearchSearchItemTriggerABusAutoethernetIpheaderSourceaddrValue

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:IPHeader:SOUrceaddr:VALue command.

Description
  • This command sets or queries the binary source address value to use when searching on an AutoEthernet bus signal. The search condition needs to be set to IPHeader.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:IPHeader:SOUrceaddr:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:IPHeader:SOUrceaddr:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:IPHeader:SOUrceaddr:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:IPHeader:SOUrceaddr:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:IPHeader:SOUrceaddr:VALue?
Info
  • SEARCH<x> is the Search number. is a quoted string of up to 32 characters, where the allowable characters are 0, 1, and X. The bits specified in the quoted string replace the least significant bits (LSB), leaving any unspecified upper bits unchanged.

SearchSearchItemTriggerABusAutoethernetMac

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:MAC command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:MAC? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:MAC? query and raise an AssertionError if the returned value does not match value.
Info
  • SEARCH<x> is the Search number. is a quoted string of up to 48 characters where the allowable characters are 0, 1, and X. The bits specified in the quoted string replace the least significant bits (LSB), leaving any unspecified upper bits unchanged.
Properties
  • .address: The SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:MAC:ADDRess command tree.
  • .length: The SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:MAC:LENgth command tree.

address property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:MAC:ADDRess command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:MAC:ADDRess? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:MAC:ADDRess? query and raise an AssertionError if the returned value does not match value.
Info
  • SEARCH<x> is the Search number. is a quoted string of up to 48 characters where the allowable characters are 0, 1, and X. The bits specified in the quoted string replace the least significant bits (LSB), leaving any unspecified upper bits unchanged.
Sub-properties
  • .destination: The SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:MAC:ADDRess:DESTination command tree.
  • .source: The SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:MAC:ADDRess:SOUrce command tree.

length property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:MAC:LENgth command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:MAC:LENgth? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:MAC:LENgth? query and raise an AssertionError if the returned value does not match value.
Info
  • SEARCH<x> is the Search number. is a quoted string of up to 16 characters where the allowable characters are 0, 1, and X. The bits specified in the quoted string replace the least significant bits (LSB), leaving any unspecified upper bits unchanged.
Sub-properties
  • .hivalue: The SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:MAC:LENgth:HIVALue command.
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:MAC:LENgth:VALue command.

SearchSearchItemTriggerABusAutoethernetMacAddress

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:MAC:ADDRess command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:MAC:ADDRess? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:MAC:ADDRess? query and raise an AssertionError if the returned value does not match value.
Info
  • SEARCH<x> is the Search number. is a quoted string of up to 48 characters where the allowable characters are 0, 1, and X. The bits specified in the quoted string replace the least significant bits (LSB), leaving any unspecified upper bits unchanged.
Properties
  • .destination: The SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:MAC:ADDRess:DESTination command tree.
  • .source: The SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:MAC:ADDRess:SOUrce command tree.

destination property

SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:MAC:ADDRess:DESTination command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:MAC:ADDRess:DESTination? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:MAC:ADDRess:DESTination? query and raise an AssertionError if the returned value does not match value.
Info
  • SEARCH<x> is the Search number. is a quoted string of up to 48 characters where the allowable characters are 0, 1, and X. The bits specified in the quoted string replace the least significant bits (LSB), leaving any unspecified upper bits unchanged.
Sub-properties
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:MAC:ADDRess:DESTination:VALue command.

source property

SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:MAC:ADDRess:SOUrce command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:MAC:ADDRess:SOUrce? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:MAC:ADDRess:SOUrce? query and raise an AssertionError if the returned value does not match value.
Info
  • SEARCH<x> is the Search number. is a quoted string of up to 48 characters where the allowable characters are 0, 1, and X. The bits specified in the quoted string replace the least significant bits (LSB), leaving any unspecified upper bits unchanged.
Sub-properties
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:MAC:ADDRess:SOUrce:VALue command.

SearchSearchItemTriggerABusAutoethernetMacAddressDestination

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:MAC:ADDRess:DESTination command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:MAC:ADDRess:DESTination? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:MAC:ADDRess:DESTination? query and raise an AssertionError if the returned value does not match value.
Info
  • SEARCH<x> is the Search number. is a quoted string of up to 48 characters where the allowable characters are 0, 1, and X. The bits specified in the quoted string replace the least significant bits (LSB), leaving any unspecified upper bits unchanged.
Properties
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:MAC:ADDRess:DESTination:VALue command.

value property

SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:MAC:ADDRess:DESTination:VALue command.

Description
  • This command sets or queries the binary MAC address destination value to use when searching on an AutoEthernet bus signal. The search condition needs to be set to MACADDRess.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:MAC:ADDRess:DESTination:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:MAC:ADDRess:DESTination:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:MAC:ADDRess:DESTination:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:MAC:ADDRess:DESTination:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:MAC:ADDRess:DESTination:VALue?
Info
  • SEARCH<x> is the Search number. is a quoted string of up to 48 characters where the allowable characters are 0, 1, and X. The bits specified in the quoted string replace the least significant bits (LSB), leaving any unspecified upper bits unchanged.

SearchSearchItemTriggerABusAutoethernetMacAddressDestinationValue

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:MAC:ADDRess:DESTination:VALue command.

Description
  • This command sets or queries the binary MAC address destination value to use when searching on an AutoEthernet bus signal. The search condition needs to be set to MACADDRess.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:MAC:ADDRess:DESTination:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:MAC:ADDRess:DESTination:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:MAC:ADDRess:DESTination:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:MAC:ADDRess:DESTination:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:MAC:ADDRess:DESTination:VALue?
Info
  • SEARCH<x> is the Search number. is a quoted string of up to 48 characters where the allowable characters are 0, 1, and X. The bits specified in the quoted string replace the least significant bits (LSB), leaving any unspecified upper bits unchanged.

SearchSearchItemTriggerABusAutoethernetMacAddressSource

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:MAC:ADDRess:SOUrce command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:MAC:ADDRess:SOUrce? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:MAC:ADDRess:SOUrce? query and raise an AssertionError if the returned value does not match value.
Info
  • SEARCH<x> is the Search number. is a quoted string of up to 48 characters where the allowable characters are 0, 1, and X. The bits specified in the quoted string replace the least significant bits (LSB), leaving any unspecified upper bits unchanged.
Properties
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:MAC:ADDRess:SOUrce:VALue command.

value property

SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:MAC:ADDRess:SOUrce:VALue command.

Description
  • This command sets or queries the binary MAC address source value to use when searching on an AutoEthernet bus signal. The search condition needs to be set to MACADDRess.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:MAC:ADDRess:SOUrce:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:MAC:ADDRess:SOUrce:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:MAC:ADDRess:SOUrce:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:MAC:ADDRess:SOUrce:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:MAC:ADDRess:SOUrce:VALue?
Info
  • SEARCH<x> is the Search number. is a quoted string of up to 48 characters where the allowable characters are 0, 1, and X. The bits specified in the quoted string replace the least significant bits (LSB), leaving any unspecified upper bits unchanged.

SearchSearchItemTriggerABusAutoethernetMacAddressSourceValue

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:MAC:ADDRess:SOUrce:VALue command.

Description
  • This command sets or queries the binary MAC address source value to use when searching on an AutoEthernet bus signal. The search condition needs to be set to MACADDRess.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:MAC:ADDRess:SOUrce:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:MAC:ADDRess:SOUrce:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:MAC:ADDRess:SOUrce:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:MAC:ADDRess:SOUrce:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:MAC:ADDRess:SOUrce:VALue?
Info
  • SEARCH<x> is the Search number. is a quoted string of up to 48 characters where the allowable characters are 0, 1, and X. The bits specified in the quoted string replace the least significant bits (LSB), leaving any unspecified upper bits unchanged.

SearchSearchItemTriggerABusAutoethernetMacLength

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:MAC:LENgth command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:MAC:LENgth? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:MAC:LENgth? query and raise an AssertionError if the returned value does not match value.
Info
  • SEARCH<x> is the Search number. is a quoted string of up to 16 characters where the allowable characters are 0, 1, and X. The bits specified in the quoted string replace the least significant bits (LSB), leaving any unspecified upper bits unchanged.
Properties
  • .hivalue: The SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:MAC:LENgth:HIVALue command.
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:MAC:LENgth:VALue command.

hivalue property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:MAC:LENgth:HIVALue command.

Description
  • This command sets or queries the binary MAC length high value to use when searching on an AutoEthernet bus signal. The search condition needs to be set to MACADDRess.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:MAC:LENgth:HIVALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:MAC:LENgth:HIVALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:MAC:LENgth:HIVALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:MAC:LENgth:HIVALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:MAC:LENgth:HIVALue?
Info
  • SEARCH<x> is the Search number. is a quoted string of up to 16 characters where the allowable characters are 0, 1, and X. The bits specified in the quoted string replace the least significant bits (LSB), leaving any unspecified upper bits unchanged.

value property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:MAC:LENgth:VALue command.

Description
  • This command sets or queries the MAC length value to use when searching on an Ethernet bus signal. The search condition needs to be set to MACADDRess.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:MAC:LENgth:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:MAC:LENgth:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:MAC:LENgth:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:MAC:LENgth:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:MAC:LENgth:VALue?
Info
  • SEARCH<x> is the Search number.
  • <QString> is a quoted string of up to 16 characters where the allowable characters are 0, 1, and X. The bits specified in the quoted string replace the least significant bits (LSB), leaving any unspecified upper bits unchanged.

SearchSearchItemTriggerABusAutoethernetMacLengthHivalue

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:MAC:LENgth:HIVALue command.

Description
  • This command sets or queries the binary MAC length high value to use when searching on an AutoEthernet bus signal. The search condition needs to be set to MACADDRess.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:MAC:LENgth:HIVALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:MAC:LENgth:HIVALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:MAC:LENgth:HIVALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:MAC:LENgth:HIVALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:MAC:LENgth:HIVALue?
Info
  • SEARCH<x> is the Search number. is a quoted string of up to 16 characters where the allowable characters are 0, 1, and X. The bits specified in the quoted string replace the least significant bits (LSB), leaving any unspecified upper bits unchanged.

SearchSearchItemTriggerABusAutoethernetMacLengthValue

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:MAC:LENgth:VALue command.

Description
  • This command sets or queries the MAC length value to use when searching on an Ethernet bus signal. The search condition needs to be set to MACADDRess.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:MAC:LENgth:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:MAC:LENgth:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:MAC:LENgth:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:MAC:LENgth:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:MAC:LENgth:VALue?
Info
  • SEARCH<x> is the Search number.
  • <QString> is a quoted string of up to 16 characters where the allowable characters are 0, 1, and X. The bits specified in the quoted string replace the least significant bits (LSB), leaving any unspecified upper bits unchanged.

SearchSearchItemTriggerABusAutoethernetPayload

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:PAYLoad command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:PAYLoad? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:PAYLoad? query and raise an AssertionError if the returned value does not match value.
Properties
  • .size: The SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:PAYLoad:SIZe command.
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:PAYLoad:VALue command.

size property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:PAYLoad:SIZe command.

Description
  • This command sets the length of the data string, in bytes, to be used when triggering on an Auto Ethernet bus signal when speed is 10 Base-T1S and packet view is ON.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:PAYLoad:SIZe? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:PAYLoad:SIZe? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:PAYLoad:SIZe value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:PAYLoad:SIZe <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:PAYLoad:SIZe?
Info
  • <NR1> sets the payload length, in bytes. It is an integer value whose minimum and default values are 1 and the maximum value is 16.

value property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:PAYLoad:VALue command.

Description
  • This command sets payload value to be used when triggering on an Auto Ethernet bus signal when speed is 10 Base-T1S and packet view is ON.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:PAYLoad:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:PAYLoad:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:PAYLoad:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:PAYLoad:VALue <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:PAYLoad:VALue?
Info
  • <QString> is a quoted string where the allowable characters are 0, 1, and X. The allowable number of characters depends on the setting for size (using SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:PAYLoad:SIZe). The bits specified in the quoted string replace the least significant bits (LSB), leaving any unspecified upper bits unchanged. The default value is XXXXXXXX.

SearchSearchItemTriggerABusAutoethernetPayloadSize

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:PAYLoad:SIZe command.

Description
  • This command sets the length of the data string, in bytes, to be used when triggering on an Auto Ethernet bus signal when speed is 10 Base-T1S and packet view is ON.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:PAYLoad:SIZe? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:PAYLoad:SIZe? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:PAYLoad:SIZe value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:PAYLoad:SIZe <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:PAYLoad:SIZe?
Info
  • <NR1> sets the payload length, in bytes. It is an integer value whose minimum and default values are 1 and the maximum value is 16.

SearchSearchItemTriggerABusAutoethernetPayloadValue

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:PAYLoad:VALue command.

Description
  • This command sets payload value to be used when triggering on an Auto Ethernet bus signal when speed is 10 Base-T1S and packet view is ON.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:PAYLoad:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:PAYLoad:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:PAYLoad:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:PAYLoad:VALue <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:PAYLoad:VALue?
Info
  • <QString> is a quoted string where the allowable characters are 0, 1, and X. The allowable number of characters depends on the setting for size (using SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:PAYLoad:SIZe). The bits specified in the quoted string replace the least significant bits (LSB), leaving any unspecified upper bits unchanged. The default value is XXXXXXXX.

SearchSearchItemTriggerABusAutoethernetQtag

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:QTAG command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:QTAG? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:QTAG? query and raise an AssertionError if the returned value does not match value.
Info
  • SEARCH<x> is the Search number.
Properties
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:QTAG:VALue command.

value property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:QTAG:VALue command.

Description
  • This command sets or queries the binary Q-tag information to use when searching on an AutoEthernet bus signal. The search condition needs to be set to QTAG.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:QTAG:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:QTAG:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:QTAG:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:QTAG:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:QTAG:VALue?
Info
  • SEARCH<x> is the Search number.
  • <QString> is a quoted string of up to 32 characters where the allowable characters are 0, 1, and X. The bits specified in the quoted string replace the least significant bits (LSB), leaving any unspecified upper bits unchanged.

SearchSearchItemTriggerABusAutoethernetQtagValue

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:QTAG:VALue command.

Description
  • This command sets or queries the binary Q-tag information to use when searching on an AutoEthernet bus signal. The search condition needs to be set to QTAG.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:QTAG:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:QTAG:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:QTAG:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:QTAG:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:QTAG:VALue?
Info
  • SEARCH<x> is the Search number.
  • <QString> is a quoted string of up to 32 characters where the allowable characters are 0, 1, and X. The bits specified in the quoted string replace the least significant bits (LSB), leaving any unspecified upper bits unchanged.

SearchSearchItemTriggerABusAutoethernetQualifier

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:QUALifier command.

Description
  • This command sets or queries the qualifier to be used when searching on an AutoEthernet bus signal. The search condition must be set to Client Data or MAC Length/Type.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:QUALifier? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:QUALifier? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:QUALifier value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:QUALifier {LESSthan|MOREthan|EQual|UNEQual|LESSEQual|MOREEQual|INrange|OUTrange}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:QUALifier?
Info
  • SEARCH<x> is the Search number.
  • LESSthan sets the qualifier to less than.
  • MOREthan sets the qualifier to greater than.
  • EQual sets the qualifier to equal.
  • UNEQual sets the qualifier to not equal.
  • LESSEQual sets the qualifier to less than or equal.
  • MOREEQual sets the qualifier to greater than or equal.
  • INrange sets the qualifier to in range.
  • OUTrange sets the qualifier to out of range.

SearchSearchItemTriggerABusAutoethernetTbt1s

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:TBT1s command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:TBT1s? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:TBT1s? query and raise an AssertionError if the returned value does not match value.
Info
  • SEARCH<x> is the Search number.
Properties
  • .data: The SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:TBT1s:DATa command tree.

data property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:TBT1s:DATa command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:TBT1s:DATa? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:TBT1s:DATa? query and raise an AssertionError if the returned value does not match value.
Info
  • SEARCH<x> is the Search number.
Sub-properties
  • .length: The SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:TBT1s:DATa:LENgth command.
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:TBT1s:DATa:VALue command.

SearchSearchItemTriggerABusAutoethernetTbt1sData

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:TBT1s:DATa command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:TBT1s:DATa? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:TBT1s:DATa? query and raise an AssertionError if the returned value does not match value.
Info
  • SEARCH<x> is the Search number.
Properties
  • .length: The SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:TBT1s:DATa:LENgth command.
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:TBT1s:DATa:VALue command.

length property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:TBT1s:DATa:LENgth command.

Description
  • This command sets the length of the data (in bytes) for data pattern to be used when triggering on an Auto Ethernet bus signal when speed is 10 Base-T1S and packet view is OFF.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:TBT1s:DATa:LENgth? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:TBT1s:DATa:LENgth? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:TBT1s:DATa:LENgth value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:TBT1s:DATa:LENgth SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:TBT1s:DATa: LENgth <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:TBT1s:DATa:LENgth?
Info
  • SEARCH<x> is the Search number.
  • <NR1> sets the data length, in bytes. It is an integer value whose minimum and default values are 1, and the maximum value is 16.

value property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:TBT1s:DATa:VALue command.

Description
  • This command sets Data value for data string to be used when triggering on an Auto Ethernet bus signal when speed is 10 Base-T1S and packet view is OFF.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:TBT1s:DATa:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:TBT1s:DATa:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:TBT1s:DATa:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:TBT1s:DATa:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:TBT1s:DATa:VALue?
Info
  • SEARCH<x> is the Search number.
  • <QString> is a quoted string where the allowable characters are 0, 1, and X. The allowable number of characters depends on the setting for size (using SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:TBT1s:DATa:LENgth). The bits specified in the quoted string replace the least significant bits (LSB), leaving any unspecified upper bits unchanged.

SearchSearchItemTriggerABusAutoethernetTbt1sDataLength

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:TBT1s:DATa:LENgth command.

Description
  • This command sets the length of the data (in bytes) for data pattern to be used when triggering on an Auto Ethernet bus signal when speed is 10 Base-T1S and packet view is OFF.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:TBT1s:DATa:LENgth? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:TBT1s:DATa:LENgth? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:TBT1s:DATa:LENgth value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:TBT1s:DATa:LENgth SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:TBT1s:DATa: LENgth <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:TBT1s:DATa:LENgth?
Info
  • SEARCH<x> is the Search number.
  • <NR1> sets the data length, in bytes. It is an integer value whose minimum and default values are 1, and the maximum value is 16.

SearchSearchItemTriggerABusAutoethernetTbt1sDataValue

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:TBT1s:DATa:VALue command.

Description
  • This command sets Data value for data string to be used when triggering on an Auto Ethernet bus signal when speed is 10 Base-T1S and packet view is OFF.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:TBT1s:DATa:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:TBT1s:DATa:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:TBT1s:DATa:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:TBT1s:DATa:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:TBT1s:DATa:VALue?
Info
  • SEARCH<x> is the Search number.
  • <QString> is a quoted string where the allowable characters are 0, 1, and X. The allowable number of characters depends on the setting for size (using SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:TBT1s:DATa:LENgth). The bits specified in the quoted string replace the least significant bits (LSB), leaving any unspecified upper bits unchanged.

SearchSearchItemTriggerABusAutoethernetTcpheader

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:TCPHeader command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:TCPHeader? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:TCPHeader? query and raise an AssertionError if the returned value does not match value.
Info
  • SEARCH<x> is the Search number.
Properties
  • .acknum: The SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:TCPHeader:ACKnum command tree.
  • .destinationport: The SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:TCPHeader:DESTinationport command tree.
  • .seqnum: The SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:TCPHeader:SEQnum command tree.
  • .sourceport: The SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:TCPHeader:SOUrceport command tree.

acknum property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:TCPHeader:ACKnum command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:TCPHeader:ACKnum? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:TCPHeader:ACKnum? query and raise an AssertionError if the returned value does not match value.
Info
  • SEARCH<x> is the Search number.
Sub-properties
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:TCPHeader:ACKnum:VALue command.

destinationport property

SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:TCPHeader:DESTinationport command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:TCPHeader:DESTinationport? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:TCPHeader:DESTinationport? query and raise an AssertionError if the returned value does not match value.
Info
  • SEARCH<x> is the Search number.
Sub-properties
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:TCPHeader:DESTinationport:VALue command.

seqnum property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:TCPHeader:SEQnum command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:TCPHeader:SEQnum? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:TCPHeader:SEQnum? query and raise an AssertionError if the returned value does not match value.
Info
  • SEARCH<x> is the Search number.
Sub-properties
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:TCPHeader:SEQnum:VALue command.

sourceport property

SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:TCPHeader:SOUrceport command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:TCPHeader:SOUrceport? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:TCPHeader:SOUrceport? query and raise an AssertionError if the returned value does not match value.
Info
  • SEARCH<x> is the Search number.
Sub-properties
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:TCPHeader:SOUrceport:VALue command.

SearchSearchItemTriggerABusAutoethernetTcpheaderAcknum

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:TCPHeader:ACKnum command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:TCPHeader:ACKnum? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:TCPHeader:ACKnum? query and raise an AssertionError if the returned value does not match value.
Info
  • SEARCH<x> is the Search number.
Properties
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:TCPHeader:ACKnum:VALue command.

value property

SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:TCPHeader:ACKnum:VALue command.

Description
  • This command sets or queries the binary ack number value to use when searching on an AutoEthernet bus signal. The default is all X’s (don’t care). The search condition needs to be set to TCPHeader.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:TCPHeader:ACKnum:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:TCPHeader:ACKnum:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:TCPHeader:ACKnum:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:TCPHeader:ACKnum:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:TCPHeader:ACKnum:VALue?
Info
  • SEARCH<x> is the Search number.
  • <QString> is a quoted string of up to 32 characters where the allowable characters are 0, 1, and X. The bits specified in the quoted string replace the least significant bits (LSB), leaving any unspecified upper bits unchanged.

SearchSearchItemTriggerABusAutoethernetTcpheaderAcknumValue

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:TCPHeader:ACKnum:VALue command.

Description
  • This command sets or queries the binary ack number value to use when searching on an AutoEthernet bus signal. The default is all X’s (don’t care). The search condition needs to be set to TCPHeader.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:TCPHeader:ACKnum:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:TCPHeader:ACKnum:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:TCPHeader:ACKnum:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:TCPHeader:ACKnum:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:TCPHeader:ACKnum:VALue?
Info
  • SEARCH<x> is the Search number.
  • <QString> is a quoted string of up to 32 characters where the allowable characters are 0, 1, and X. The bits specified in the quoted string replace the least significant bits (LSB), leaving any unspecified upper bits unchanged.

SearchSearchItemTriggerABusAutoethernetTcpheaderDestinationport

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:TCPHeader:DESTinationport command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:TCPHeader:DESTinationport? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:TCPHeader:DESTinationport? query and raise an AssertionError if the returned value does not match value.
Info
  • SEARCH<x> is the Search number.
Properties
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:TCPHeader:DESTinationport:VALue command.

value property

SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:TCPHeader:DESTinationport:VALue command.

Description
  • This command sets or queries the binary destination port value to use when searching on the AutoEthernet TCP header destination port number. The search condition needs to be set to TCPHeader.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:TCPHeader:DESTinationport:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:TCPHeader:DESTinationport:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:TCPHeader:DESTinationport:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:TCPHeader:DESTinationport:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:TCPHeader:DESTinationport:VALue?
Info
  • SEARCH<x> is the Search number.
  • <QString> is a quoted string of up to 16 characters where the allowable characters are 0, 1, and X. The bits specified in the quoted string replace the least significant bits (LSB), leaving any unspecified upper bits unchanged.

SearchSearchItemTriggerABusAutoethernetTcpheaderDestinationportValue

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:TCPHeader:DESTinationport:VALue command.

Description
  • This command sets or queries the binary destination port value to use when searching on the AutoEthernet TCP header destination port number. The search condition needs to be set to TCPHeader.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:TCPHeader:DESTinationport:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:TCPHeader:DESTinationport:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:TCPHeader:DESTinationport:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:TCPHeader:DESTinationport:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:TCPHeader:DESTinationport:VALue?
Info
  • SEARCH<x> is the Search number.
  • <QString> is a quoted string of up to 16 characters where the allowable characters are 0, 1, and X. The bits specified in the quoted string replace the least significant bits (LSB), leaving any unspecified upper bits unchanged.

SearchSearchItemTriggerABusAutoethernetTcpheaderSeqnum

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:TCPHeader:SEQnum command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:TCPHeader:SEQnum? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:TCPHeader:SEQnum? query and raise an AssertionError if the returned value does not match value.
Info
  • SEARCH<x> is the Search number.
Properties
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:TCPHeader:SEQnum:VALue command.

value property

SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:TCPHeader:SEQnum:VALue command.

Description
  • This command sets or queries the TCP header sequence number value to use when searching on the AutoEthernet TCP header destination port number. The search condition needs to be set to TCPHeader.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:TCPHeader:SEQnum:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:TCPHeader:SEQnum:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:TCPHeader:SEQnum:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:TCPHeader:SEQnum:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:TCPHeader:SEQnum:VALue?
Info
  • SEARCH<x> is the Search number.
  • <QString> is a quoted string of up to 32 characters where the allowable characters are 0, 1, and X. The bits specified in the quoted string replace the least significant bits (LSB), leaving any unspecified upper bits unchanged.

SearchSearchItemTriggerABusAutoethernetTcpheaderSeqnumValue

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:TCPHeader:SEQnum:VALue command.

Description
  • This command sets or queries the TCP header sequence number value to use when searching on the AutoEthernet TCP header destination port number. The search condition needs to be set to TCPHeader.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:TCPHeader:SEQnum:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:TCPHeader:SEQnum:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:TCPHeader:SEQnum:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:TCPHeader:SEQnum:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:TCPHeader:SEQnum:VALue?
Info
  • SEARCH<x> is the Search number.
  • <QString> is a quoted string of up to 32 characters where the allowable characters are 0, 1, and X. The bits specified in the quoted string replace the least significant bits (LSB), leaving any unspecified upper bits unchanged.

SearchSearchItemTriggerABusAutoethernetTcpheaderSourceport

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:TCPHeader:SOUrceport command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:TCPHeader:SOUrceport? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:TCPHeader:SOUrceport? query and raise an AssertionError if the returned value does not match value.
Info
  • SEARCH<x> is the Search number.
Properties
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:TCPHeader:SOUrceport:VALue command.

value property

SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:TCPHeader:SOUrceport:VALue command.

Description
  • This command sets or queries the binary source port value to use when searching on an AutoEthernet bus signal. The search condition needs to be set to TCPHeader.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:TCPHeader:SOUrceport:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:TCPHeader:SOUrceport:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:TCPHeader:SOUrceport:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:TCPHeader:SOUrceport:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:TCPHeader:SOUrceport:VALue?
Info
  • SEARCH<x> is the Search number.
  • <QString> is a quoted string of up to 16 characters where the allowable characters are 0, 1, and X. The bits specified in the quoted string replace the least significant bits (LSB), leaving any unspecified upper bits unchanged.

SearchSearchItemTriggerABusAutoethernetTcpheaderSourceportValue

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:TCPHeader:SOUrceport:VALue command.

Description
  • This command sets or queries the binary source port value to use when searching on an AutoEthernet bus signal. The search condition needs to be set to TCPHeader.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:TCPHeader:SOUrceport:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:TCPHeader:SOUrceport:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:TCPHeader:SOUrceport:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:TCPHeader:SOUrceport:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:TCPHeader:SOUrceport:VALue?
Info
  • SEARCH<x> is the Search number.
  • <QString> is a quoted string of up to 16 characters where the allowable characters are 0, 1, and X. The bits specified in the quoted string replace the least significant bits (LSB), leaving any unspecified upper bits unchanged.

SearchSearchItemTriggerABusCan

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN? query and raise an AssertionError if the returned value does not match value.
Properties
  • .ads: The SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:ADS command tree.
  • .condition: The SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:CONDition command.
  • .crctype: The SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:CRCType command.
  • .das: The SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DAS command tree.
  • .data: The SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa command tree.
  • .errtype: The SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:ERRType command.
  • .fd: The SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:FD command tree.
  • .frametype: The SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:FRAMEtype command.
  • .identifier: The SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:IDentifier command tree.
  • .pidentifier: The SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:PIDentifier command tree.
  • .xldata: The SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:XLDATa command tree.

ads property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:ADS command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:ADS? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:ADS? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .type: The SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:ADS:TYPe command.

condition property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:CONDition command.

Description
  • This command sets or queries the search condition for a CAN bus. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:CONDition? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:CONDition? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:CONDition value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:CONDition {SOF|FRAMEtype|IDentifier|DATa|IDANDDATA|EOF|ERRor|FDBITS}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:CONDition?
Info
  • SOF specifies the search condition for a CAN bus as start of frame.
  • FRAMEtype specifies the search condition for a CAN bus as frame type.
  • IDentifier specifies the search condition for a CAN bus as identifier.
  • DATa specifies the search condition for a CAN bus as data.
  • IDANDDATA specifies the search condition for a CAN bus as ID and data.
  • EOF specifies the search condition for a CAN bus as end of frame.
  • ERRor specifies the search condition for a CAN bus as error.
  • FDBITS specifies the search condition for a CAN bus as FD bits.

crctype property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:CRCType command.

Description
  • This command specifies the CAN XL trigger type to be valid on PCRC and FCRC. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:CRCType? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:CRCType? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:CRCType value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:CRCType {PCRC|FCRC}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:CRCType?
Info
  • PCRC specifies error type as CRC13.
  • FCRC FCRC specifies error type as CRC32.

das property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DAS command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DAS? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DAS? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .type: The SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DAS:TYPe command.

data property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .direction: The SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:DIRection command.
  • .offset: The SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:OFFSet command.
  • .qualifier: The SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:QUALifier command.
  • .size: The SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:SIZe command.
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:VALue command.
  • .xlbittype: The SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:XLBITType command.

errtype property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:ERRType command.

Description
  • This command sets or queries the type of error condition for a CAN bus to search on. The search number is specified by x. The search condition must be set to ERRor.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:ERRType? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:ERRType? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:ERRType value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:ERRType {ACKMISS|BITSTUFFing|FORMERRor|xlFormError|CRC|ANYERRor}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:ERRType?
Info
  • ACKMISS specifies a search based on a missing ACK field.
  • BITSTUFFing specifies a search based on a bit stuffing error.
  • FORMERRor specifies a search based on a CAN FD form error. To use this option, the CAN standard must be set to FDISO or FDNONISO.
  • xlFormError specifies a search based on a XL form error.
  • CRC specifies a search based on a CRC error.
  • ANYERRor specifies a search based on any error type.

fd property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:FD command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:FD? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:FD? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .brsbit: The SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:FD:BRSBit command.
  • .esibit: The SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:FD:ESIBit command.

frametype property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:FRAMEtype command.

Description
  • This command sets or queries CAN bus trigger frame type to be used when searching on a CAN bus signal. The search condition must be set to FRAMEtype. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:FRAMEtype? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:FRAMEtype? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:FRAMEtype value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:FRAMEtype {DATa|ERRor|OVERLoad|REMote|xldata}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:FRAMEtype?
Info
  • DATa sets the frame type to data.
  • ERRor sets the frame type to error.
  • OVERLoad sets the frame type to overload.
  • REMote sets the frame type to remote.
  • xldata sets the frame type to XL data.

identifier property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:IDentifier command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:IDentifier? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:IDentifier? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .mode: The SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:IDentifier:MODe command.
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:IDentifier:VALue command.

pidentifier property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:PIDentifier command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:PIDentifier? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:PIDentifier? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .size: The SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:PIDentifier:SIZe command.
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:PIDentifier:VALue command.

xldata property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:XLDATa command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:XLDATa? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:XLDATa? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .size: The SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:XLDATa:SIZe command.
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:XLDATa:VALue command.

SearchSearchItemTriggerABusCanAds

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:ADS command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:ADS? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:ADS? query and raise an AssertionError if the returned value does not match value.
Properties
  • .type: The SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:ADS:TYPe command.

type property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:ADS:TYPe command.

Description
  • This command sets or queries the trigger condition for a CAN bus on the ADS bits. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:ADS:TYPe? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:ADS:TYPe? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:ADS:TYPe value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:ADS:TYPe {ADH|DH<x>|DL1}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:ADS:TYPe?
Info
  • ADH specifies the ADS Type for a CAN bus as Arbitration to Data high.
  • DH1 specifies the ADS Type for a CAN bus as Data High bit 1.
  • DH2 specifies the ADS Type for a CAN bus as Data High bit 2.
  • DL1 specifies the ADS Type for a CAN bus as Data Low bit 1.

SearchSearchItemTriggerABusCanAdsType

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:ADS:TYPe command.

Description
  • This command sets or queries the trigger condition for a CAN bus on the ADS bits. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:ADS:TYPe? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:ADS:TYPe? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:ADS:TYPe value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:ADS:TYPe {ADH|DH<x>|DL1}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:ADS:TYPe?
Info
  • ADH specifies the ADS Type for a CAN bus as Arbitration to Data high.
  • DH1 specifies the ADS Type for a CAN bus as Data High bit 1.
  • DH2 specifies the ADS Type for a CAN bus as Data High bit 2.
  • DL1 specifies the ADS Type for a CAN bus as Data Low bit 1.

SearchSearchItemTriggerABusCanCondition

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:CONDition command.

Description
  • This command sets or queries the search condition for a CAN bus. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:CONDition? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:CONDition? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:CONDition value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:CONDition {SOF|FRAMEtype|IDentifier|DATa|IDANDDATA|EOF|ERRor|FDBITS}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:CONDition?
Info
  • SOF specifies the search condition for a CAN bus as start of frame.
  • FRAMEtype specifies the search condition for a CAN bus as frame type.
  • IDentifier specifies the search condition for a CAN bus as identifier.
  • DATa specifies the search condition for a CAN bus as data.
  • IDANDDATA specifies the search condition for a CAN bus as ID and data.
  • EOF specifies the search condition for a CAN bus as end of frame.
  • ERRor specifies the search condition for a CAN bus as error.
  • FDBITS specifies the search condition for a CAN bus as FD bits.

SearchSearchItemTriggerABusCanCrctype

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:CRCType command.

Description
  • This command specifies the CAN XL trigger type to be valid on PCRC and FCRC. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:CRCType? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:CRCType? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:CRCType value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:CRCType {PCRC|FCRC}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:CRCType?
Info
  • PCRC specifies error type as CRC13.
  • FCRC FCRC specifies error type as CRC32.

SearchSearchItemTriggerABusCanDas

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DAS command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DAS? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DAS? query and raise an AssertionError if the returned value does not match value.
Properties
  • .type: The SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DAS:TYPe command.

type property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DAS:TYPe command.

Description
  • This command sets or queries the trigger condition for a CAN bus on the DAS bits. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DAS:TYPe? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DAS:TYPe? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DAS:TYPe value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DAS:TYPe {DAH|AH<x>|AL1}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DAS:TYPe?
Info
  • DAH specifies the DAS Type as Data to Arbitration High bit.
  • AH1 specifies the DAS Type as Arbitration High bit 1.
  • AH2 specifies the DAS Type as Arbitration High bit 2.
  • AL1 specifies the DAS Type as Arbitration Low bit 1.

SearchSearchItemTriggerABusCanDasType

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DAS:TYPe command.

Description
  • This command sets or queries the trigger condition for a CAN bus on the DAS bits. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DAS:TYPe? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DAS:TYPe? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DAS:TYPe value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DAS:TYPe {DAH|AH<x>|AL1}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DAS:TYPe?
Info
  • DAH specifies the DAS Type as Data to Arbitration High bit.
  • AH1 specifies the DAS Type as Arbitration High bit 1.
  • AH2 specifies the DAS Type as Arbitration High bit 2.
  • AL1 specifies the DAS Type as Arbitration Low bit 1.

SearchSearchItemTriggerABusCanData

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa? query and raise an AssertionError if the returned value does not match value.
Properties
  • .direction: The SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:DIRection command.
  • .offset: The SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:OFFSet command.
  • .qualifier: The SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:QUALifier command.
  • .size: The SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:SIZe command.
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:VALue command.
  • .xlbittype: The SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:XLBITType command.

direction property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:DIRection command.

Description
  • This command specifies the CAN search type to be valid on a Read, Write, or Either condition. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:DIRection? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:DIRection? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:DIRection value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:DIRection {READ|WRITE|NOCARE}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:DIRection?
Info
  • READ specifies the read direction.
  • WRITE specifies the write direction.
  • NOCARE specifies either data direction.

offset property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:OFFSet command.

Description
  • This command sets or queries the data offset value, in bytes, to use when searching on the CAN data field. The search number is specified by x. The search condition must be set to DATA or IDANDDATA.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:OFFSet? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:OFFSet? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:OFFSet value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:OFFSet <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:OFFSet?
Info
  • <NR1> is an integer whose minimum and default values are -1 (don’t care) and maximum is up to 7 (for CAN 2.0) or up to 63 (for ISO CAN FD and Non-ISO CAN FD). The maximum is dependent on the number of bytes being matched and the CAN standard selected. Its value is calculated as [Absolute Maximum] - [Data Match Size]. For CAN 2.0, the absolute maximum is 8 bytes. For ISO CAN FD and Non-ISO CAN FD, the absolute maximum is 64 bytes. The minimum data match size is 1 byte, which produces the ranges listed above. Increasing the data match size above 1 byte will adjust the range of valid data offset values accordingly.

qualifier property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:QUALifier command.

Description
  • This command sets or queries the CAN bus trigger data qualifier to be used when searching on a CAN bus signal. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:QUALifier? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:QUALifier? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:QUALifier value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:QUALifier {EQual|LESSEQual|MOREEQua|UNEQual|LESSthan|MOREthan}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:QUALifier?
Info
  • EQual sets the data qualifier to equal.
  • LESSEQual sets the data qualifier to less equal.
  • MOREEQua sets the data qualifier to more equal.
  • UNEQual sets the data qualifier to unequal.
  • LESSthan sets the data qualifier to less than.
  • MOREthan sets the data qualifier to more than.

size property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:SIZe command.

Description
  • This command sets or queries the length of the data string, in bytes, to be used when searching on a CAN bus signal. The search condition must be set to IDANDDATA or DATA. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:SIZe? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:SIZe? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:SIZe value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:SIZe <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:SIZe?
Info
  • <NR1> specifies the data size.

value property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:VALue command.

Description
  • This command sets or queries the binary data value to be used when searching on a CAN bus signal. The search condition must be set to IDANDDATA OR DATA.
Usage
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:VALue <QString>
Info
  • <QString>

xlbittype property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:XLBITType command.

Description
  • This command sets or queries the trigger condition for a CAN bus on the XL Data bits. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:XLBITType? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:XLBITType? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:XLBITType value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:XLBITType {AF|VCID|SDT|SEC|SBC|ADS|DAS}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:XLBITType?
Info
  • AF specifies the XL bit type to Acceptance Field.
  • VCID specifies the XL bit type to Virtual CAN Network ID.
  • SDT specifies the XL bit type to Device Data Unit type.
  • SEC specifies the XL bit type to Simple extended content.
  • SBC specifies the XL bit type to Stuff Bit Count.
  • ADS specifies the XL bit type to Arbitration to Data sequence.
  • DAS specifies the XL bit type to Data to Arbitration sequence.

SearchSearchItemTriggerABusCanDataDirection

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:DIRection command.

Description
  • This command specifies the CAN search type to be valid on a Read, Write, or Either condition. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:DIRection? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:DIRection? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:DIRection value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:DIRection {READ|WRITE|NOCARE}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:DIRection?
Info
  • READ specifies the read direction.
  • WRITE specifies the write direction.
  • NOCARE specifies either data direction.

SearchSearchItemTriggerABusCanDataOffset

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:OFFSet command.

Description
  • This command sets or queries the data offset value, in bytes, to use when searching on the CAN data field. The search number is specified by x. The search condition must be set to DATA or IDANDDATA.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:OFFSet? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:OFFSet? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:OFFSet value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:OFFSet <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:OFFSet?
Info
  • <NR1> is an integer whose minimum and default values are -1 (don’t care) and maximum is up to 7 (for CAN 2.0) or up to 63 (for ISO CAN FD and Non-ISO CAN FD). The maximum is dependent on the number of bytes being matched and the CAN standard selected. Its value is calculated as [Absolute Maximum] - [Data Match Size]. For CAN 2.0, the absolute maximum is 8 bytes. For ISO CAN FD and Non-ISO CAN FD, the absolute maximum is 64 bytes. The minimum data match size is 1 byte, which produces the ranges listed above. Increasing the data match size above 1 byte will adjust the range of valid data offset values accordingly.

SearchSearchItemTriggerABusCanDataQualifier

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:QUALifier command.

Description
  • This command sets or queries the CAN bus trigger data qualifier to be used when searching on a CAN bus signal. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:QUALifier? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:QUALifier? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:QUALifier value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:QUALifier {EQual|LESSEQual|MOREEQua|UNEQual|LESSthan|MOREthan}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:QUALifier?
Info
  • EQual sets the data qualifier to equal.
  • LESSEQual sets the data qualifier to less equal.
  • MOREEQua sets the data qualifier to more equal.
  • UNEQual sets the data qualifier to unequal.
  • LESSthan sets the data qualifier to less than.
  • MOREthan sets the data qualifier to more than.

SearchSearchItemTriggerABusCanDataSize

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:SIZe command.

Description
  • This command sets or queries the length of the data string, in bytes, to be used when searching on a CAN bus signal. The search condition must be set to IDANDDATA or DATA. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:SIZe? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:SIZe? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:SIZe value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:SIZe <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:SIZe?
Info
  • <NR1> specifies the data size.

SearchSearchItemTriggerABusCanDataValue

Bases: SCPICmdWrite

The SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:VALue command.

Description
  • This command sets or queries the binary data value to be used when searching on a CAN bus signal. The search condition must be set to IDANDDATA OR DATA.
Usage
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:VALue <QString>
Info
  • <QString>

SearchSearchItemTriggerABusCanDataXlbittype

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:XLBITType command.

Description
  • This command sets or queries the trigger condition for a CAN bus on the XL Data bits. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:XLBITType? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:XLBITType? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:XLBITType value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:XLBITType {AF|VCID|SDT|SEC|SBC|ADS|DAS}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:XLBITType?
Info
  • AF specifies the XL bit type to Acceptance Field.
  • VCID specifies the XL bit type to Virtual CAN Network ID.
  • SDT specifies the XL bit type to Device Data Unit type.
  • SEC specifies the XL bit type to Simple extended content.
  • SBC specifies the XL bit type to Stuff Bit Count.
  • ADS specifies the XL bit type to Arbitration to Data sequence.
  • DAS specifies the XL bit type to Data to Arbitration sequence.

SearchSearchItemTriggerABusCanErrtype

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:ERRType command.

Description
  • This command sets or queries the type of error condition for a CAN bus to search on. The search number is specified by x. The search condition must be set to ERRor.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:ERRType? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:ERRType? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:ERRType value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:ERRType {ACKMISS|BITSTUFFing|FORMERRor|xlFormError|CRC|ANYERRor}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:ERRType?
Info
  • ACKMISS specifies a search based on a missing ACK field.
  • BITSTUFFing specifies a search based on a bit stuffing error.
  • FORMERRor specifies a search based on a CAN FD form error. To use this option, the CAN standard must be set to FDISO or FDNONISO.
  • xlFormError specifies a search based on a XL form error.
  • CRC specifies a search based on a CRC error.
  • ANYERRor specifies a search based on any error type.

SearchSearchItemTriggerABusCanFd

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:FD command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:FD? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:FD? query and raise an AssertionError if the returned value does not match value.
Properties
  • .brsbit: The SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:FD:BRSBit command.
  • .esibit: The SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:FD:ESIBit command.

brsbit property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:FD:BRSBit command.

Description
  • This command sets or queries the value of the bit rate switch bit (BRS bit) for a CAN bus to search on. The search number is specified by x. The search condition must be set to FDBITS, and the CAN standard must be FDISO or FDNONISO.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:FD:BRSBit? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:FD:BRSBit? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:FD:BRSBit value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:FD:BRSBit {ONE|ZERo|NOCARE}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:FD:BRSBit?
Info
  • ONE filters CAN FD packets to only match those where the BRS bit has a value of 1 (fast data enabled).
  • ZERo filters CAN FD packets to only match those where the BRS bit has a value of 0 (fast data disabled).
  • NOCARE disables filtering of CAN FD packets on the BRS bit.

esibit property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:FD:ESIBit command.

Description
  • This command sets or queries the value of the error state indicator bit (ESI bit) for a CAN bus to search on. The search number is specified by x. The search condition must be set to FDBITS, and the CAN standard must be FDISO or FDNONISO.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:FD:ESIBit? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:FD:ESIBit? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:FD:ESIBit value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:FD:ESIBit {ONE|ZERo|NOCARE}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:FD:ESIBit?
Info
  • ONE filters CAN FD packets to only match those where the ESI bit has a value of 1 (recessive).
  • ZERo filters CAN FD packets to only match those where the ESI bit has a value of 0 (dominant).
  • NOCARE disables filtering of CAN FD packets on the ESI bit.

SearchSearchItemTriggerABusCanFdBrsbit

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:FD:BRSBit command.

Description
  • This command sets or queries the value of the bit rate switch bit (BRS bit) for a CAN bus to search on. The search number is specified by x. The search condition must be set to FDBITS, and the CAN standard must be FDISO or FDNONISO.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:FD:BRSBit? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:FD:BRSBit? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:FD:BRSBit value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:FD:BRSBit {ONE|ZERo|NOCARE}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:FD:BRSBit?
Info
  • ONE filters CAN FD packets to only match those where the BRS bit has a value of 1 (fast data enabled).
  • ZERo filters CAN FD packets to only match those where the BRS bit has a value of 0 (fast data disabled).
  • NOCARE disables filtering of CAN FD packets on the BRS bit.

SearchSearchItemTriggerABusCanFdEsibit

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:FD:ESIBit command.

Description
  • This command sets or queries the value of the error state indicator bit (ESI bit) for a CAN bus to search on. The search number is specified by x. The search condition must be set to FDBITS, and the CAN standard must be FDISO or FDNONISO.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:FD:ESIBit? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:FD:ESIBit? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:FD:ESIBit value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:FD:ESIBit {ONE|ZERo|NOCARE}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:FD:ESIBit?
Info
  • ONE filters CAN FD packets to only match those where the ESI bit has a value of 1 (recessive).
  • ZERo filters CAN FD packets to only match those where the ESI bit has a value of 0 (dominant).
  • NOCARE disables filtering of CAN FD packets on the ESI bit.

SearchSearchItemTriggerABusCanFrametype

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:FRAMEtype command.

Description
  • This command sets or queries CAN bus trigger frame type to be used when searching on a CAN bus signal. The search condition must be set to FRAMEtype. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:FRAMEtype? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:FRAMEtype? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:FRAMEtype value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:FRAMEtype {DATa|ERRor|OVERLoad|REMote|xldata}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:FRAMEtype?
Info
  • DATa sets the frame type to data.
  • ERRor sets the frame type to error.
  • OVERLoad sets the frame type to overload.
  • REMote sets the frame type to remote.
  • xldata sets the frame type to XL data.

SearchSearchItemTriggerABusCanIdentifier

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:IDentifier command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:IDentifier? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:IDentifier? query and raise an AssertionError if the returned value does not match value.
Properties
  • .mode: The SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:IDentifier:MODe command.
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:IDentifier:VALue command.

mode property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:IDentifier:MODe command.

Description
  • This command sets or queries the CAN bus trigger identifier (address) mode to be used when searching on a CAN bus signal. The search number is specified by x. The search condition must be set to IDANDDATA or DATA.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:IDentifier:MODe? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:IDentifier:MODe? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:IDentifier:MODe value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:IDentifier:MODe {EXTENDed|STandard}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:IDentifier:MODe?
Info
  • EXTENDed specifies the extended identifier mode.
  • STandard specifies the standard identifier mode.

value property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:IDentifier:VALue command.

Description
  • This command sets or queries CAN bus trigger identifier (address) value to be used when searching on a CAN bus signal. The search number is specified by x. The search condition must be set to IDANDDATA or DATA.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:IDentifier:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:IDentifier:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:IDentifier:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:IDentifier:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:IDentifier:VALue?
Info
  • <QString> is the identifier value.

SearchSearchItemTriggerABusCanIdentifierMode

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:IDentifier:MODe command.

Description
  • This command sets or queries the CAN bus trigger identifier (address) mode to be used when searching on a CAN bus signal. The search number is specified by x. The search condition must be set to IDANDDATA or DATA.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:IDentifier:MODe? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:IDentifier:MODe? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:IDentifier:MODe value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:IDentifier:MODe {EXTENDed|STandard}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:IDentifier:MODe?
Info
  • EXTENDed specifies the extended identifier mode.
  • STandard specifies the standard identifier mode.

SearchSearchItemTriggerABusCanIdentifierValue

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:IDentifier:VALue command.

Description
  • This command sets or queries CAN bus trigger identifier (address) value to be used when searching on a CAN bus signal. The search number is specified by x. The search condition must be set to IDANDDATA or DATA.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:IDentifier:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:IDentifier:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:IDentifier:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:IDentifier:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:IDentifier:VALue?
Info
  • <QString> is the identifier value.

SearchSearchItemTriggerABusCanPidentifier

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:PIDentifier command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:PIDentifier? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:PIDentifier? query and raise an AssertionError if the returned value does not match value.
Properties
  • .size: The SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:PIDentifier:SIZe command.
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:PIDentifier:VALue command.

size property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:PIDentifier:SIZe command.

Description
  • This command sets the length of the data string, in bytes, to be used when triggering on a CAN bus signal. The trigger condition must be set to Priority Identifier. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:PIDentifier:SIZe? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:PIDentifier:SIZe? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:PIDentifier:SIZe value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:PIDentifier:SIZe <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:PIDentifier:SIZe?
Info
  • <NR1> specifies the data size.

value property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:PIDentifier:VALue command.

Description
  • This command sets the binary data value to use when triggering on a CAN bus signal when standard is XL. The trigger condition must be set to Priority Identifier. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:PIDentifier:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:PIDentifier:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:PIDentifier:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:PIDentifier:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:PIDentifier:VALue?
Info
  • <QString> specifies the identifier value.

SearchSearchItemTriggerABusCanPidentifierSize

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:PIDentifier:SIZe command.

Description
  • This command sets the length of the data string, in bytes, to be used when triggering on a CAN bus signal. The trigger condition must be set to Priority Identifier. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:PIDentifier:SIZe? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:PIDentifier:SIZe? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:PIDentifier:SIZe value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:PIDentifier:SIZe <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:PIDentifier:SIZe?
Info
  • <NR1> specifies the data size.

SearchSearchItemTriggerABusCanPidentifierValue

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:PIDentifier:VALue command.

Description
  • This command sets the binary data value to use when triggering on a CAN bus signal when standard is XL. The trigger condition must be set to Priority Identifier. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:PIDentifier:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:PIDentifier:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:PIDentifier:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:PIDentifier:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:PIDentifier:VALue?
Info
  • <QString> specifies the identifier value.

SearchSearchItemTriggerABusCanXldata

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:XLDATa command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:XLDATa? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:XLDATa? query and raise an AssertionError if the returned value does not match value.
Properties
  • .size: The SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:XLDATa:SIZe command.
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:XLDATa:VALue command.

size property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:XLDATa:SIZe command.

Description
  • This command sets or queries the length of the data string, in bytes, to be used when searching on a CAN bus signal. The search condition must be set to IDANDDATA or DATA. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:XLDATa:SIZe? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:XLDATa:SIZe? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:XLDATa:SIZe value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:XLDATa:SIZe <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:XLDATa:SIZe?
Info
  • <NR1> specifies the data size.

value property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:XLDATa:VALue command.

Description
  • This command sets or queries the binary data value to be used when searching on a CAN bus signal. The search condition must be set to IDANDDATA OR DATA. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:XLDATa:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:XLDATa:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:XLDATa:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:XLDATa:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:XLDATa:VALue?
Info
  • <QString> specifies the data value.

SearchSearchItemTriggerABusCanXldataSize

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:XLDATa:SIZe command.

Description
  • This command sets or queries the length of the data string, in bytes, to be used when searching on a CAN bus signal. The search condition must be set to IDANDDATA or DATA. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:XLDATa:SIZe? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:XLDATa:SIZe? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:XLDATa:SIZe value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:XLDATa:SIZe <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:XLDATa:SIZe?
Info
  • <NR1> specifies the data size.

SearchSearchItemTriggerABusCanXldataValue

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:XLDATa:VALue command.

Description
  • This command sets or queries the binary data value to be used when searching on a CAN bus signal. The search condition must be set to IDANDDATA OR DATA. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:XLDATa:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:XLDATa:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:XLDATa:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:XLDATa:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:XLDATa:VALue?
Info
  • <QString> specifies the data value.

SearchSearchItemTriggerABusCphy

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY? query and raise an AssertionError if the returned value does not match value.
Properties
  • .blue: The SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:BLUe command tree.
  • .condition: The SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:CONDition command.
  • .data: The SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:DATa command tree.
  • .error: The SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:ERRor command tree.
  • .escapemode: The SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:ESCAPEMODe command tree.
  • .green: The SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:GREen command tree.
  • .mode: The SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:MODe command tree.
  • .packets: The SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:PACKets command tree.
  • .pixel: The SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:PIXel command tree.
  • .red: The SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:RED command tree.
  • .symbol: The SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:SYMBol command tree.
  • .word: The SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:WORD command tree.
  • .wordcount: The SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:WORDCOUNt command tree.
  • .ycbcr: The SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:YCBCR command tree.
  • .yuv: The SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:YUV command tree.

blue property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:BLUe command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:BLUe? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:BLUe? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:BLUe:VALue command.

condition property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:CONDition command.

Description
  • This command sets or queries the trigger condition for an CPHY bus. The default trigger on condition is SOT.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:CONDition? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:CONDition? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:CONDition value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:CONDition {SOT|EOT|DATa|EOTPDATa|OPTIONALPARam|SCRambling|COMPression|PACKets|BUSTURNAROUnd|ESCAPEMODe|STop|ERRors|MODe|WORD|SYMBol}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:CONDition?
Info
  • SOT specifies SOT as the field within a CPHY frame to search on.
  • EOT specifies EOT as the field within a CPHY frame to search on.
  • DATa specifies DATa as the field within a CPHY frame to search on.
  • EOTPDATa specifies EOTPDATa as the field within a CPHY frame to search on.
  • OPTIONALPARam specifies OPTIONALPARam as the field within a CPHY frame to search on.
  • SCRambling specifies SCRambling as the field within a CPHY frame to search on.
  • COMPression specifies COMPression as the field within a CPHY frame to search on.
  • PACKets specifies PACKets as the field within a CPHY frame to search on.
  • BUSTURNAROUnd specifies BUSTURNAROUnd as the field within a CPHY frame to search on.
  • ESCAPEMODe specifies ESCAPEMODe as the field within a CPHY frame to search on.
  • STop specifies STop as the field within a CPHY frame to search on.
  • ERRors specifies ERRors as the field within a CPHY frame to search on.
  • MODe specifies MODe as the field within a CPHY frame to search on.
  • WORD specifies WORD as the field within a CPHY frame to search on.
  • SYMBol specifies SYMBol as the field within a CPHY frame to search on.

data property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:DATa command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:DATa? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:DATa? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .size: The SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:DATa:SIZe command.
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:DATa:VALue command.

error property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:ERRor command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:ERRor? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:ERRor? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .type: The SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:ERRor:TYPe command.

escapemode property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:ESCAPEMODe command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:ESCAPEMODe? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:ESCAPEMODe? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .command: The SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:ESCAPEMODe:COMMand command.

green property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:GREen command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:GREen? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:GREen? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:GREen:VALue command.

mode property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:MODe command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:MODe? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:MODe? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .type: The SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:MODe:TYPe command.

packets property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:PACKets command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:PACKets? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:PACKets? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .list: The SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:PACKets:LIST command.
  • .type: The SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:PACKets:TYPe command.

pixel property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:PIXel command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:PIXel? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:PIXel? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .number: The SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:PIXel:NUMBer command.
  • .searchoption: The SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:PIXel:SEARCHOPTion command.

red property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:RED command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:RED? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:RED? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:RED:VALue command.

symbol property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:SYMBol command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:SYMBol? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:SYMBol? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .size: The SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:SYMBol:SIZe command.
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:SYMBol:VALue command.

word property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:WORD command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:WORD? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:WORD? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .size: The SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:WORD:SIZe command.
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:WORD:VALue command.

wordcount property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:WORDCOUNt command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:WORDCOUNt? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:WORDCOUNt? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:WORDCOUNt:VALue command.

ycbcr property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:YCBCR command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:YCBCR? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:YCBCR? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .cb: The SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:YCBCR:CB command.
  • .cr: The SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:YCBCR:CR command.
  • .y: The SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:YCBCR:Y command.

yuv property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:YUV command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:YUV? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:YUV? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .u: The SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:YUV:U command.
  • .v: The SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:YUV:V command.
  • .y: The SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:YUV:Y command.

SearchSearchItemTriggerABusCphyBlue

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:BLUe command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:BLUe? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:BLUe? query and raise an AssertionError if the returned value does not match value.
Properties
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:BLUe:VALue command.

value property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:BLUe:VALue command.

Description
  • This command specifies the blue data string used for CPHY triggering if the trigger condition is on RGB packet.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:BLUe:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:BLUe:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:BLUe:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:BLUe:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:BLUe:VALue?
Info
  • <QString> is the identifier value. The default blue value is XXXXXXXXXX.

SearchSearchItemTriggerABusCphyBlueValue

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:BLUe:VALue command.

Description
  • This command specifies the blue data string used for CPHY triggering if the trigger condition is on RGB packet.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:BLUe:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:BLUe:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:BLUe:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:BLUe:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:BLUe:VALue?
Info
  • <QString> is the identifier value. The default blue value is XXXXXXXXXX.

SearchSearchItemTriggerABusCphyCondition

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:CONDition command.

Description
  • This command sets or queries the trigger condition for an CPHY bus. The default trigger on condition is SOT.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:CONDition? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:CONDition? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:CONDition value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:CONDition {SOT|EOT|DATa|EOTPDATa|OPTIONALPARam|SCRambling|COMPression|PACKets|BUSTURNAROUnd|ESCAPEMODe|STop|ERRors|MODe|WORD|SYMBol}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:CONDition?
Info
  • SOT specifies SOT as the field within a CPHY frame to search on.
  • EOT specifies EOT as the field within a CPHY frame to search on.
  • DATa specifies DATa as the field within a CPHY frame to search on.
  • EOTPDATa specifies EOTPDATa as the field within a CPHY frame to search on.
  • OPTIONALPARam specifies OPTIONALPARam as the field within a CPHY frame to search on.
  • SCRambling specifies SCRambling as the field within a CPHY frame to search on.
  • COMPression specifies COMPression as the field within a CPHY frame to search on.
  • PACKets specifies PACKets as the field within a CPHY frame to search on.
  • BUSTURNAROUnd specifies BUSTURNAROUnd as the field within a CPHY frame to search on.
  • ESCAPEMODe specifies ESCAPEMODe as the field within a CPHY frame to search on.
  • STop specifies STop as the field within a CPHY frame to search on.
  • ERRors specifies ERRors as the field within a CPHY frame to search on.
  • MODe specifies MODe as the field within a CPHY frame to search on.
  • WORD specifies WORD as the field within a CPHY frame to search on.
  • SYMBol specifies SYMBol as the field within a CPHY frame to search on.

SearchSearchItemTriggerABusCphyData

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:DATa command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:DATa? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:DATa? query and raise an AssertionError if the returned value does not match value.
Properties
  • .size: The SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:DATa:SIZe command.
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:DATa:VALue command.

size property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:DATa:SIZe command.

Description
  • This command specifies the length of the data string in bytes to be used for an CPHY trigger if the trigger condition is DATA.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:DATa:SIZe? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:DATa:SIZe? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:DATa:SIZe value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:DATa:SIZe <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:DATa:SIZe?
Info
  • <NR1> specifies the data size. The default data size is 1 byte and otherwise ranges between 1 and 5.

value property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:DATa:VALue command.

Description
  • This command specifies the binary data string used for CPHY triggering if the trigger condition is DATA.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:DATa:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:DATa:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:DATa:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:DATa:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:DATa:VALue?
Info
  • <QString> is the identifier value. The default value is XXXXXXXX.

SearchSearchItemTriggerABusCphyDataSize

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:DATa:SIZe command.

Description
  • This command specifies the length of the data string in bytes to be used for an CPHY trigger if the trigger condition is DATA.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:DATa:SIZe? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:DATa:SIZe? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:DATa:SIZe value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:DATa:SIZe <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:DATa:SIZe?
Info
  • <NR1> specifies the data size. The default data size is 1 byte and otherwise ranges between 1 and 5.

SearchSearchItemTriggerABusCphyDataValue

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:DATa:VALue command.

Description
  • This command specifies the binary data string used for CPHY triggering if the trigger condition is DATA.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:DATa:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:DATa:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:DATa:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:DATa:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:DATa:VALue?
Info
  • <QString> is the identifier value. The default value is XXXXXXXX.

SearchSearchItemTriggerABusCphyError

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:ERRor command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:ERRor? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:ERRor? query and raise an AssertionError if the returned value does not match value.
Properties
  • .type: The SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:ERRor:TYPe command.

type property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:ERRor:TYPe command.

Description
  • This command sets or queries the error type for CPHY bus. The default error type condition is ANY.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:ERRor:TYPe? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:ERRor:TYPe? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:ERRor:TYPe value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:ERRor:TYPe {ANY|ECC|CRC}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:ERRor:TYPe?
Info
  • ANY specifies ANY as the field within a CPHY frame to search on.
  • ECC specifies ECC as the field within a CPHY frame to search on.
  • CRC specifies CRC as the field within a CPHY frame to search on.

SearchSearchItemTriggerABusCphyErrorType

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:ERRor:TYPe command.

Description
  • This command sets or queries the error type for CPHY bus. The default error type condition is ANY.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:ERRor:TYPe? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:ERRor:TYPe? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:ERRor:TYPe value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:ERRor:TYPe {ANY|ECC|CRC}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:ERRor:TYPe?
Info
  • ANY specifies ANY as the field within a CPHY frame to search on.
  • ECC specifies ECC as the field within a CPHY frame to search on.
  • CRC specifies CRC as the field within a CPHY frame to search on.

SearchSearchItemTriggerABusCphyEscapemode

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:ESCAPEMODe command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:ESCAPEMODe? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:ESCAPEMODe? query and raise an AssertionError if the returned value does not match value.
Properties
  • .command: The SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:ESCAPEMODe:COMMand command.

command property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:ESCAPEMODe:COMMand command.

Description
  • This command sets or queries the escape mode command type for CPHY bus..
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:ESCAPEMODe:COMMand? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:ESCAPEMODe:COMMand? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:ESCAPEMODe:COMMand value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:ESCAPEMODe:COMMand {LPDT|ULPS|RESETTRIGger|ANY}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:ESCAPEMODe:COMMand?
Info
  • LPDT specifies LPDT as the field within a CPHY frame to search on.
  • ULPS specifies ULPS as the field within a CPHY frame to search on.
  • RESETTRIGger specifies RESETTRIGger as the field within a CPHY frame to search on.
  • ANY specifies ANY as the field within a CPHY frame to search on. ANY is the default value.

SearchSearchItemTriggerABusCphyEscapemodeCommand

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:ESCAPEMODe:COMMand command.

Description
  • This command sets or queries the escape mode command type for CPHY bus..
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:ESCAPEMODe:COMMand? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:ESCAPEMODe:COMMand? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:ESCAPEMODe:COMMand value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:ESCAPEMODe:COMMand {LPDT|ULPS|RESETTRIGger|ANY}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:ESCAPEMODe:COMMand?
Info
  • LPDT specifies LPDT as the field within a CPHY frame to search on.
  • ULPS specifies ULPS as the field within a CPHY frame to search on.
  • RESETTRIGger specifies RESETTRIGger as the field within a CPHY frame to search on.
  • ANY specifies ANY as the field within a CPHY frame to search on. ANY is the default value.

SearchSearchItemTriggerABusCphyGreen

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:GREen command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:GREen? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:GREen? query and raise an AssertionError if the returned value does not match value.
Properties
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:GREen:VALue command.

value property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:GREen:VALue command.

Description
  • This command specifies the green data string used for CPHY triggering if the trigger condition is on RGB packet.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:GREen:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:GREen:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:GREen:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:GREen:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:GREen:VALue?
Info
  • <QString> is the identifier value. The default green value is XXXXXXXXXX.

SearchSearchItemTriggerABusCphyGreenValue

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:GREen:VALue command.

Description
  • This command specifies the green data string used for CPHY triggering if the trigger condition is on RGB packet.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:GREen:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:GREen:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:GREen:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:GREen:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:GREen:VALue?
Info
  • <QString> is the identifier value. The default green value is XXXXXXXXXX.

SearchSearchItemTriggerABusCphyMode

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:MODe command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:MODe? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:MODe? query and raise an AssertionError if the returned value does not match value.
Properties
  • .type: The SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:MODe:TYPe command.

type property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:MODe:TYPe command.

Description
  • This command sets or queries the mode type for CPHY bus.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:MODe:TYPe? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:MODe:TYPe? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:MODe:TYPe value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:MODe:TYPe {HS|LP}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:MODe:TYPe?
Info
  • HS specifies HS as the mode within a CPHY frame to search on. HS is default mode type condition.
  • LP specifies LP as the mode within a CPHY frame to search on.

SearchSearchItemTriggerABusCphyModeType

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:MODe:TYPe command.

Description
  • This command sets or queries the mode type for CPHY bus.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:MODe:TYPe? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:MODe:TYPe? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:MODe:TYPe value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:MODe:TYPe {HS|LP}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:MODe:TYPe?
Info
  • HS specifies HS as the mode within a CPHY frame to search on. HS is default mode type condition.
  • LP specifies LP as the mode within a CPHY frame to search on.

SearchSearchItemTriggerABusCphyPackets

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:PACKets command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:PACKets? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:PACKets? query and raise an AssertionError if the returned value does not match value.
Properties
  • .list: The SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:PACKets:LIST command.
  • .type: The SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:PACKets:TYPe command.

list property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:PACKets:LIST command.

Description
  • This command sets or queries the packet list for CPHY bus. The default packet list condition is VSYNCSTART.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:PACKets:LIST? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:PACKets:LIST? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:PACKets:LIST value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:PACKets:LIST {VSYNCSTART|VSYNCEND|HSYNCSTART|HSYNCEND|EOTP|COLOROFF|COLORON|SHUTDOWN|TURNON|GSW|GR|COMPRESSION|SCRAMBLING|EXECUTEQUEue|DCSSW|DCSR|GLONGWRITE|DSINULL|DSIBLANk|MAXRETSIZE|DCSGLONGWRITE|PICPARameter|COMPRESSEDPSTReam|PPS101010|PPS121212|PPS565|PPS666|LPS666|PPS888|YCBCR24|LPYCBCR24|YCBCR16|YCBCR12|ACKNowledge|ERRORREPort|GSRR|GLONGREAD|DCSLONGREAD|DCSSRR|FRAMESTARt|FRAMEEND|LINESTARt|LINEEND|GSP|CSINULL|CSIBLANk|EMBEDDED|USEREIGHTB|RGB565|RGB555|RGB444|RGB666|RAW6|RAW7|RAW8|RAW10|RAW12|RAW14|RAW16|RAW20|RGB888|YUV420L8|YUV8BIT|YUV422B10|YUV420B10}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:PACKets:LIST?
Info
  • VSYNCSTART specifies VSYNCSTART as the packet within CPHY frame to search on.
  • VSYNCEND specifies VSYNCEND as the packet within CPHY frame to search on.
  • HSYNCSTART specifies HSYNCSTART as the packet within CPHY frame to search on.
  • HSYNCEND specifies HSYNCEND as the packet within CPHY frame to search on.
  • EOTP specifies EOTP as the packet within CPHY frame to search on.
  • COLOROFF specifies COLOROFF as the packet within CPHY frame to search on.
  • COLORON specifies COLORON as the packet within CPHY frame to search on.
  • SHUTDOWN specifies SHUTDOWN as the packet within CPHY frame to search on.
  • TURNON specifies TURNON as the packet within CPHY frame to search on.
  • GSW specifies GSW as the packet within CPHY frame to search on.
  • GR specifies GR as the packet within CPHY frame to search on.
  • COMPRESSION specifies COMPRESSION as the packet within CPHY frame to search on.
  • SCRAMBLING specifies SCRAMBLING as the packet within CPHY frame to search on.
  • EXECUTEQUEue specifies EXECUTEQUEue as the packet within CPHY frame to search on.
  • DCSSW specifies DCSSW as the packet within CPHY frame to search on.
  • DCSR specifies DCSR as the packet within CPHY frame to search on.
  • GLONGWRITE specifies GLONGWRITE as the packet within CPHY frame to search on.
  • DSINULL specifies DSINULL as the packet within CPHY frame to search on.
  • DSIBLANk specifies DSIBLANk as the packet within CPHY frame to search on.
  • MAXRETSIZE specifies MAXRETSIZE as the packet within CPHY frame to search on.
  • DCSGLONGWRITE specifies DCSGLONGWRITE as the packet within CPHY frame to search on.
  • PICPARameter specifies PICPARameter as the packet within CPHY frame to search on.
  • COMPRESSEDPSTReam specifies COMPRESSEDPSTReam as the packet within CPHY frame to search on.
  • PPS101010 specifies PPS101010 as the packet within CPHY frame to search on.
  • PPS121212 specifies PPS121212 as the packet within CPHY frame to search on.
  • PPS565 specifies PPS565 as the packet within CPHY frame to search on.
  • PPS666 specifies PPS666 as the packet within CPHY frame to search on.
  • LPS666 specifies LPS666 as the packet within CPHY frame to search on.
  • PPS888 specifies LPS666 as the packet within CPHY frame to search on.
  • YCBCR24 specifies YCBCR24 as the packet within CPHY frame to search on.
  • LPYCBCR24 specifies LPYCBCR24 as the packet within CPHY frame to search on.
  • YCBCR16 specifies YCBCR16 as the packet within CPHY frame to search on.
  • YCBCR12 specifies YCBCR12 as the packet within CPHY frame to search on.
  • ACKNowledge specifies ACKNowledge as the packet within CPHY frame to search on.
  • ERRORREPort specifies ERRORREPort as the packet within CPHY frame to search on.
  • GSRR specifies GSRR as the packet within CPHY frame to search on.
  • GLONGREAD specifies GLONGREAD as the packet within CPHY frame to search on.
  • DCSLONGREAD specifies DCSLONGREAD as the packet within CPHY frame to search on.
  • DCSSRR specifies DCSSRR as the packet within CPHY frame to search on.
  • FRAMESTARt specifies FRAMESTARt as the packet within CPHY frame to search on.
  • FRAMEEND specifies FRAMEEND as the packet within CPHY frame to search on.
  • LINESTARt specifies LINESTARt as the packet within CPHY frame to search on.
  • DSIBLANk specifies DSIBLANk as the packet within CPHY frame to search on.
  • MAXRETSIZE specifies MAXRETSIZE as the packet within CPHY frame to search on.
  • DCSGLONGWRITE specifies DCSGLONGWRITE as the packet within CPHY frame to search on.
  • PICPARameter specifies PICPARameter as the packet within CPHY frame to search on.
  • COMPRESSEDPSTReam specifies COMPRESSEDPSTReam as the packet within CPHY frame to search on.
  • PPS101010 specifies PPS101010 as the packet within CPHY frame to search on.
  • PPS121212 specifies PPS121212 as the packet within CPHY frame to search on.
  • PPS565 specifies PPS565 as the packet within CPHY frame to search on.
  • PPS666 specifies PPS666 as the packet within CPHY frame to search on.
  • LPS666 specifies LPS666 as the packet within CPHY frame to search on.
  • PPS888 specifies LPS666 as the packet within CPHY frame to search on.
  • YCBCR24 specifies YCBCR24 as the packet within CPHY frame to search on.
  • LPYCBCR24 specifies LPYCBCR24 as the packet within CPHY frame to search on.
  • YCBCR16 specifies YCBCR16 as the packet within CPHY frame to search on.
  • YCBCR12 specifies YCBCR12 as the packet within CPHY frame to search on.
  • ACKNowledge specifies ACKNowledge as the packet within CPHY frame to search on.
  • ERRORREPort specifies ERRORREPort as the packet within CPHY frame to search on.
  • GSRR specifies GSRR as the packet within CPHY frame to search on.
  • GLONGREAD specifies GLONGREAD as the packet within CPHY frame to search on.
  • DCSLONGREAD specifies DCSLONGREAD as the packet within CPHY frame to search on.
  • DCSSRR specifies DCSSRR as the packet within CPHY frame to search on.
  • FRAMESTARt specifies FRAMESTARt as the packet within CPHY frame to search on.
  • FRAMEEND specifies FRAMEEND as the packet within CPHY frame to search on.
  • LINESTARt specifies LINESTARt as the packet within CPHY frame to search on.

type property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:PACKets:TYPe command.

Description
  • This command sets or queries the packet type for CPHY bus.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:PACKets:TYPe? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:PACKets:TYPe? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:PACKets:TYPe value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:PACKets:TYPe {SHORt|LONG}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:PACKets:TYPe?
Info
  • SHORt specifies SHORt as the field within a CPHY frame to search on. SHORt is the default packet type condition.
  • LONG specifies LONG as the field within a CPHY frame to search on.

SearchSearchItemTriggerABusCphyPacketsList

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:PACKets:LIST command.

Description
  • This command sets or queries the packet list for CPHY bus. The default packet list condition is VSYNCSTART.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:PACKets:LIST? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:PACKets:LIST? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:PACKets:LIST value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:PACKets:LIST {VSYNCSTART|VSYNCEND|HSYNCSTART|HSYNCEND|EOTP|COLOROFF|COLORON|SHUTDOWN|TURNON|GSW|GR|COMPRESSION|SCRAMBLING|EXECUTEQUEue|DCSSW|DCSR|GLONGWRITE|DSINULL|DSIBLANk|MAXRETSIZE|DCSGLONGWRITE|PICPARameter|COMPRESSEDPSTReam|PPS101010|PPS121212|PPS565|PPS666|LPS666|PPS888|YCBCR24|LPYCBCR24|YCBCR16|YCBCR12|ACKNowledge|ERRORREPort|GSRR|GLONGREAD|DCSLONGREAD|DCSSRR|FRAMESTARt|FRAMEEND|LINESTARt|LINEEND|GSP|CSINULL|CSIBLANk|EMBEDDED|USEREIGHTB|RGB565|RGB555|RGB444|RGB666|RAW6|RAW7|RAW8|RAW10|RAW12|RAW14|RAW16|RAW20|RGB888|YUV420L8|YUV8BIT|YUV422B10|YUV420B10}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:PACKets:LIST?
Info
  • VSYNCSTART specifies VSYNCSTART as the packet within CPHY frame to search on.
  • VSYNCEND specifies VSYNCEND as the packet within CPHY frame to search on.
  • HSYNCSTART specifies HSYNCSTART as the packet within CPHY frame to search on.
  • HSYNCEND specifies HSYNCEND as the packet within CPHY frame to search on.
  • EOTP specifies EOTP as the packet within CPHY frame to search on.
  • COLOROFF specifies COLOROFF as the packet within CPHY frame to search on.
  • COLORON specifies COLORON as the packet within CPHY frame to search on.
  • SHUTDOWN specifies SHUTDOWN as the packet within CPHY frame to search on.
  • TURNON specifies TURNON as the packet within CPHY frame to search on.
  • GSW specifies GSW as the packet within CPHY frame to search on.
  • GR specifies GR as the packet within CPHY frame to search on.
  • COMPRESSION specifies COMPRESSION as the packet within CPHY frame to search on.
  • SCRAMBLING specifies SCRAMBLING as the packet within CPHY frame to search on.
  • EXECUTEQUEue specifies EXECUTEQUEue as the packet within CPHY frame to search on.
  • DCSSW specifies DCSSW as the packet within CPHY frame to search on.
  • DCSR specifies DCSR as the packet within CPHY frame to search on.
  • GLONGWRITE specifies GLONGWRITE as the packet within CPHY frame to search on.
  • DSINULL specifies DSINULL as the packet within CPHY frame to search on.
  • DSIBLANk specifies DSIBLANk as the packet within CPHY frame to search on.
  • MAXRETSIZE specifies MAXRETSIZE as the packet within CPHY frame to search on.
  • DCSGLONGWRITE specifies DCSGLONGWRITE as the packet within CPHY frame to search on.
  • PICPARameter specifies PICPARameter as the packet within CPHY frame to search on.
  • COMPRESSEDPSTReam specifies COMPRESSEDPSTReam as the packet within CPHY frame to search on.
  • PPS101010 specifies PPS101010 as the packet within CPHY frame to search on.
  • PPS121212 specifies PPS121212 as the packet within CPHY frame to search on.
  • PPS565 specifies PPS565 as the packet within CPHY frame to search on.
  • PPS666 specifies PPS666 as the packet within CPHY frame to search on.
  • LPS666 specifies LPS666 as the packet within CPHY frame to search on.
  • PPS888 specifies LPS666 as the packet within CPHY frame to search on.
  • YCBCR24 specifies YCBCR24 as the packet within CPHY frame to search on.
  • LPYCBCR24 specifies LPYCBCR24 as the packet within CPHY frame to search on.
  • YCBCR16 specifies YCBCR16 as the packet within CPHY frame to search on.
  • YCBCR12 specifies YCBCR12 as the packet within CPHY frame to search on.
  • ACKNowledge specifies ACKNowledge as the packet within CPHY frame to search on.
  • ERRORREPort specifies ERRORREPort as the packet within CPHY frame to search on.
  • GSRR specifies GSRR as the packet within CPHY frame to search on.
  • GLONGREAD specifies GLONGREAD as the packet within CPHY frame to search on.
  • DCSLONGREAD specifies DCSLONGREAD as the packet within CPHY frame to search on.
  • DCSSRR specifies DCSSRR as the packet within CPHY frame to search on.
  • FRAMESTARt specifies FRAMESTARt as the packet within CPHY frame to search on.
  • FRAMEEND specifies FRAMEEND as the packet within CPHY frame to search on.
  • LINESTARt specifies LINESTARt as the packet within CPHY frame to search on.
  • DSIBLANk specifies DSIBLANk as the packet within CPHY frame to search on.
  • MAXRETSIZE specifies MAXRETSIZE as the packet within CPHY frame to search on.
  • DCSGLONGWRITE specifies DCSGLONGWRITE as the packet within CPHY frame to search on.
  • PICPARameter specifies PICPARameter as the packet within CPHY frame to search on.
  • COMPRESSEDPSTReam specifies COMPRESSEDPSTReam as the packet within CPHY frame to search on.
  • PPS101010 specifies PPS101010 as the packet within CPHY frame to search on.
  • PPS121212 specifies PPS121212 as the packet within CPHY frame to search on.
  • PPS565 specifies PPS565 as the packet within CPHY frame to search on.
  • PPS666 specifies PPS666 as the packet within CPHY frame to search on.
  • LPS666 specifies LPS666 as the packet within CPHY frame to search on.
  • PPS888 specifies LPS666 as the packet within CPHY frame to search on.
  • YCBCR24 specifies YCBCR24 as the packet within CPHY frame to search on.
  • LPYCBCR24 specifies LPYCBCR24 as the packet within CPHY frame to search on.
  • YCBCR16 specifies YCBCR16 as the packet within CPHY frame to search on.
  • YCBCR12 specifies YCBCR12 as the packet within CPHY frame to search on.
  • ACKNowledge specifies ACKNowledge as the packet within CPHY frame to search on.
  • ERRORREPort specifies ERRORREPort as the packet within CPHY frame to search on.
  • GSRR specifies GSRR as the packet within CPHY frame to search on.
  • GLONGREAD specifies GLONGREAD as the packet within CPHY frame to search on.
  • DCSLONGREAD specifies DCSLONGREAD as the packet within CPHY frame to search on.
  • DCSSRR specifies DCSSRR as the packet within CPHY frame to search on.
  • FRAMESTARt specifies FRAMESTARt as the packet within CPHY frame to search on.
  • FRAMEEND specifies FRAMEEND as the packet within CPHY frame to search on.
  • LINESTARt specifies LINESTARt as the packet within CPHY frame to search on.

SearchSearchItemTriggerABusCphyPacketsType

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:PACKets:TYPe command.

Description
  • This command sets or queries the packet type for CPHY bus.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:PACKets:TYPe? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:PACKets:TYPe? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:PACKets:TYPe value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:PACKets:TYPe {SHORt|LONG}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:PACKets:TYPe?
Info
  • SHORt specifies SHORt as the field within a CPHY frame to search on. SHORt is the default packet type condition.
  • LONG specifies LONG as the field within a CPHY frame to search on.

SearchSearchItemTriggerABusCphyPixel

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:PIXel command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:PIXel? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:PIXel? query and raise an AssertionError if the returned value does not match value.
Properties
  • .number: The SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:PIXel:NUMBer command.
  • .searchoption: The SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:PIXel:SEARCHOPTion command.

number property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:PIXel:NUMBer command.

Description
  • This command specifies the pixel number to be used for CPHY triggering if the trigger condition is on pixel number pattern. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:PIXel:NUMBer? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:PIXel:NUMBer? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:PIXel:NUMBer value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:PIXel:NUMBer <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:PIXel:NUMBer?
Info
  • <NR1> specifies the pixel number. The default pixel number value is 0.

searchoption property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:PIXel:SEARCHOPTion command.

Description
  • This command sets or queries the search pattern type for CPHY bus. The default search pattern type value is PIXELVALue.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:PIXel:SEARCHOPTion? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:PIXel:SEARCHOPTion? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:PIXel:SEARCHOPTion value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:PIXel:SEARCHOPTion {PIXELVALue|PIXELNUMBer}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:PIXel:SEARCHOPTion?
Info
  • PIXELVALue specifies PIXELVALue as the field within a CPHY frame to search on.
  • PIXELNUMBer specifies PIXELNUMBer as the field within a CPHY frame to search on.

SearchSearchItemTriggerABusCphyPixelNumber

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:PIXel:NUMBer command.

Description
  • This command specifies the pixel number to be used for CPHY triggering if the trigger condition is on pixel number pattern. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:PIXel:NUMBer? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:PIXel:NUMBer? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:PIXel:NUMBer value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:PIXel:NUMBer <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:PIXel:NUMBer?
Info
  • <NR1> specifies the pixel number. The default pixel number value is 0.

SearchSearchItemTriggerABusCphyPixelSearchoption

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:PIXel:SEARCHOPTion command.

Description
  • This command sets or queries the search pattern type for CPHY bus. The default search pattern type value is PIXELVALue.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:PIXel:SEARCHOPTion? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:PIXel:SEARCHOPTion? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:PIXel:SEARCHOPTion value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:PIXel:SEARCHOPTion {PIXELVALue|PIXELNUMBer}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:PIXel:SEARCHOPTion?
Info
  • PIXELVALue specifies PIXELVALue as the field within a CPHY frame to search on.
  • PIXELNUMBer specifies PIXELNUMBer as the field within a CPHY frame to search on.

SearchSearchItemTriggerABusCphyRed

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:RED command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:RED? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:RED? query and raise an AssertionError if the returned value does not match value.
Properties
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:RED:VALue command.

value property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:RED:VALue command.

Description
  • This command specifies the red data string used for CPHY triggering if the trigger condition is on RGB packet.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:RED:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:RED:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:RED:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:RED:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:RED:VALue?
Info
  • <QString> is the identifier value. The default red value is XXXXXXXXXX.

SearchSearchItemTriggerABusCphyRedValue

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:RED:VALue command.

Description
  • This command specifies the red data string used for CPHY triggering if the trigger condition is on RGB packet.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:RED:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:RED:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:RED:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:RED:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:RED:VALue?
Info
  • <QString> is the identifier value. The default red value is XXXXXXXXXX.

SearchSearchItemTriggerABusCphySymbol

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:SYMBol command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:SYMBol? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:SYMBol? query and raise an AssertionError if the returned value does not match value.
Properties
  • .size: The SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:SYMBol:SIZe command.
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:SYMBol:VALue command.

size property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:SYMBol:SIZe command.

Description
  • This command specifies the length of the data string in bytes to be used for an CPHY trigger if the trigger condition is SYMBol. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:SYMBol:SIZe? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:SYMBol:SIZe? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:SYMBol:SIZe value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:SYMBol:SIZe <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:SYMBol:SIZe?
Info
  • <NR1> specifies the length of the data string. The default symbol size is 7 symbols and otherwise ranges between 1 and 14.

value property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:SYMBol:VALue command.

Description
  • This command specifies the binary data string used for CPHY triggering if the trigger condition is SYMBol. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:SYMBol:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:SYMBol:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:SYMBol:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:SYMBol:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:SYMBol:VALue?
Info
  • <QString> specifies the binary data string. The default data value is XXX.

SearchSearchItemTriggerABusCphySymbolSize

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:SYMBol:SIZe command.

Description
  • This command specifies the length of the data string in bytes to be used for an CPHY trigger if the trigger condition is SYMBol. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:SYMBol:SIZe? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:SYMBol:SIZe? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:SYMBol:SIZe value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:SYMBol:SIZe <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:SYMBol:SIZe?
Info
  • <NR1> specifies the length of the data string. The default symbol size is 7 symbols and otherwise ranges between 1 and 14.

SearchSearchItemTriggerABusCphySymbolValue

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:SYMBol:VALue command.

Description
  • This command specifies the binary data string used for CPHY triggering if the trigger condition is SYMBol. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:SYMBol:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:SYMBol:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:SYMBol:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:SYMBol:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:SYMBol:VALue?
Info
  • <QString> specifies the binary data string. The default data value is XXX.

SearchSearchItemTriggerABusCphyWord

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:WORD command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:WORD? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:WORD? query and raise an AssertionError if the returned value does not match value.
Properties
  • .size: The SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:WORD:SIZe command.
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:WORD:VALue command.

size property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:WORD:SIZe command.

Description
  • This command specifies the length of the word string in bytes to be used for an CPHY trigger if the trigger condition is WORD. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:WORD:SIZe? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:WORD:SIZe? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:WORD:SIZe value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:WORD:SIZe <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:WORD:SIZe?
Info
  • <NR1> specifies the length of the data string. The default word size is 1 byte and otherwise ranges between 1 and 5.

value property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:WORD:VALue command.

Description
  • This command specifies the binary data string used for CPHY triggering if the trigger condition is Word. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:WORD:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:WORD:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:WORD:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:WORD:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:WORD:VALue?
Info
  • <QString> specifies the binary data string. The default data value is XXXXXXXXXXXXXXXX.

SearchSearchItemTriggerABusCphyWordSize

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:WORD:SIZe command.

Description
  • This command specifies the length of the word string in bytes to be used for an CPHY trigger if the trigger condition is WORD. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:WORD:SIZe? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:WORD:SIZe? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:WORD:SIZe value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:WORD:SIZe <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:WORD:SIZe?
Info
  • <NR1> specifies the length of the data string. The default word size is 1 byte and otherwise ranges between 1 and 5.

SearchSearchItemTriggerABusCphyWordValue

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:WORD:VALue command.

Description
  • This command specifies the binary data string used for CPHY triggering if the trigger condition is Word. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:WORD:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:WORD:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:WORD:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:WORD:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:WORD:VALue?
Info
  • <QString> specifies the binary data string. The default data value is XXXXXXXXXXXXXXXX.

SearchSearchItemTriggerABusCphyWordcount

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:WORDCOUNt command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:WORDCOUNt? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:WORDCOUNt? query and raise an AssertionError if the returned value does not match value.
Properties
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:WORDCOUNt:VALue command.

value property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:WORDCOUNt:VALue command.

Description
  • This command specifies the word count data string used for CPHY triggering if the trigger condition is on any rgb/ycbcr/yuv packet. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:WORDCOUNt:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:WORDCOUNt:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:WORDCOUNt:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:WORDCOUNt:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:WORDCOUNt:VALue?
Info
  • <QString> specifies the word count data string. The default data value is XXXXXXXXXXXXXXXX.

SearchSearchItemTriggerABusCphyWordcountValue

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:WORDCOUNt:VALue command.

Description
  • This command specifies the word count data string used for CPHY triggering if the trigger condition is on any rgb/ycbcr/yuv packet. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:WORDCOUNt:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:WORDCOUNt:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:WORDCOUNt:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:WORDCOUNt:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:WORDCOUNt:VALue?
Info
  • <QString> specifies the word count data string. The default data value is XXXXXXXXXXXXXXXX.

SearchSearchItemTriggerABusCphyYcbcr

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:YCBCR command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:YCBCR? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:YCBCR? query and raise an AssertionError if the returned value does not match value.
Properties
  • .cb: The SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:YCBCR:CB command.
  • .cr: The SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:YCBCR:CR command.
  • .y: The SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:YCBCR:Y command.

cb property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:YCBCR:CB command.

Description
  • This command specifies the Cb data string used for CPHY triggering if the trigger condition is on YCbCr packet. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:YCBCR:CB? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:YCBCR:CB? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:YCBCR:CB value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:YCBCR:CB <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:YCBCR:CB?
Info
  • <QString> is the identifier value. The default YCBCR packets CB value is XXXXXXXXXX.

cr property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:YCBCR:CR command.

Description
  • This command specifies the Cr data string used for CPHY triggering if the trigger condition is on YCbCr packet. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:YCBCR:CR? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:YCBCR:CR? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:YCBCR:CR value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:YCBCR:CR <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:YCBCR:CR?
Info
  • <QString> is the identifier value. The default YCBCR packets CR value is XXXXXXXXXX.

y property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:YCBCR:Y command.

Description
  • This command specifies the Y data string used for CPHY triggering if the trigger condition is on YCbCr packet. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:YCBCR:Y? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:YCBCR:Y? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:YCBCR:Y value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:YCBCR:Y <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:YCBCR:Y?
Info
  • <QString> is the identifier value. The default YCBCR packets Y value is XXXXXXXXXX.

SearchSearchItemTriggerABusCphyYcbcrCb

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:YCBCR:CB command.

Description
  • This command specifies the Cb data string used for CPHY triggering if the trigger condition is on YCbCr packet. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:YCBCR:CB? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:YCBCR:CB? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:YCBCR:CB value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:YCBCR:CB <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:YCBCR:CB?
Info
  • <QString> is the identifier value. The default YCBCR packets CB value is XXXXXXXXXX.

SearchSearchItemTriggerABusCphyYcbcrCr

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:YCBCR:CR command.

Description
  • This command specifies the Cr data string used for CPHY triggering if the trigger condition is on YCbCr packet. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:YCBCR:CR? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:YCBCR:CR? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:YCBCR:CR value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:YCBCR:CR <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:YCBCR:CR?
Info
  • <QString> is the identifier value. The default YCBCR packets CR value is XXXXXXXXXX.

SearchSearchItemTriggerABusCphyYcbcrY

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:YCBCR:Y command.

Description
  • This command specifies the Y data string used for CPHY triggering if the trigger condition is on YCbCr packet. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:YCBCR:Y? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:YCBCR:Y? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:YCBCR:Y value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:YCBCR:Y <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:YCBCR:Y?
Info
  • <QString> is the identifier value. The default YCBCR packets Y value is XXXXXXXXXX.

SearchSearchItemTriggerABusCphyYuv

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:YUV command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:YUV? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:YUV? query and raise an AssertionError if the returned value does not match value.
Properties
  • .u: The SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:YUV:U command.
  • .v: The SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:YUV:V command.
  • .y: The SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:YUV:Y command.

u property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:YUV:U command.

Description
  • This command specifies the U data string used for CPHY triggering if the trigger condition is on YUV packet. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:YUV:U? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:YUV:U? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:YUV:U value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:YUV:U <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:YUV:U?
Info
  • <QString> is the identifier value. The default YUV packets U value is XXXXXXXXXX.

v property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:YUV:V command.

Description
  • This command specifies the V data string used for CPHY triggering if the trigger condition is on YUV packet. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:YUV:V? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:YUV:V? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:YUV:V value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:YUV:V <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:YUV:V?
Info
  • <QString> is the identifier value. The default YUV packets V value is XXXXXXXXXX.

y property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:YUV:Y command.

Description
  • This command specifies the Y data string used for CPHY triggering if the trigger condition is on YUV packet. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:YUV:Y? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:YUV:Y? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:YUV:Y value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:YUV:Y <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:YUV:Y?
Info
  • <QString> is the identifier value. The default YUV packets Y value is XXXXXXXXXX.

SearchSearchItemTriggerABusCphyYuvU

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:YUV:U command.

Description
  • This command specifies the U data string used for CPHY triggering if the trigger condition is on YUV packet. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:YUV:U? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:YUV:U? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:YUV:U value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:YUV:U <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:YUV:U?
Info
  • <QString> is the identifier value. The default YUV packets U value is XXXXXXXXXX.

SearchSearchItemTriggerABusCphyYuvV

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:YUV:V command.

Description
  • This command specifies the V data string used for CPHY triggering if the trigger condition is on YUV packet. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:YUV:V? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:YUV:V? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:YUV:V value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:YUV:V <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:YUV:V?
Info
  • <QString> is the identifier value. The default YUV packets V value is XXXXXXXXXX.

SearchSearchItemTriggerABusCphyYuvY

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:YUV:Y command.

Description
  • This command specifies the Y data string used for CPHY triggering if the trigger condition is on YUV packet. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:YUV:Y? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:YUV:Y? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:YUV:Y value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:YUV:Y <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:YUV:Y?
Info
  • <QString> is the identifier value. The default YUV packets Y value is XXXXXXXXXX.

SearchSearchItemTriggerABusCxpi

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI? query and raise an AssertionError if the returned value does not match value.
Properties
  • .condition: The SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:CONDition command.
  • .counter: The SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:COUNter command tree.
  • .data: The SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:DATa command tree.
  • .dlc: The SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:DLC command tree.
  • .error: The SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:ERROR command tree.
  • .extdlc: The SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:EXTDLC command tree.
  • .frameid: The SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:FRAMEID command tree.
  • .frame: The SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:FRAMe command tree.
  • .netmn: The SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:NETMN command tree.

condition property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:CONDition command.

Description
  • This command sets or queries the trigger condition for a CXPI bus. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:CONDition? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:CONDition? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:CONDition value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:CONDition {STARt|FRAMes|FRAMEID|PTYPe|DLC|EXTDLC|NETMN|COUNter|DATa|ERRors}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:CONDition?
Info
  • STARt specifies STARt as the event for a CXPI frame to search on. This is the default value.
  • FRAMes specifies FRAMes as the frame types for CXPI packets to search on.
  • FRAMEID specifies FRAMEID as the field within a CXPI frame to search on.
  • PTYPe specifies PTYPe as the field within a CXPI frame to search on.
  • DLC specifies DLC as the field within a CXPI frame to search on.
  • EXTDLC specifies EXTDLC as the field within a CXPI frame to search on.
  • NETMN specifies NETMN as the field within a CXPI frame to search on.
  • COUNter specifies COUNter as the field within a CXPI frame to search on.
  • DATa specifies DATa as the field within a CXPI frame to search on.
  • ERRors specifies ERRors as type of error within a CXPI frame to search on.

counter property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:COUNter command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:COUNter? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:COUNter? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:COUNter:VALue command.

data property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:DATa command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:DATa? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:DATa? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .size: The SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:DATa:SIZe command.
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:DATa:VALue command.

dlc property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:DLC command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:DLC? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:DLC? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:DLC:VALue command.

error property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:ERROR command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:ERROR? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:ERROR? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .type: The SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:ERROR:TYPe command.

extdlc property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:EXTDLC command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:EXTDLC? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:EXTDLC? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:EXTDLC:VALue command.

frame property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:FRAMe command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:FRAMe? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:FRAMe? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .type: The SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:FRAMe:TYPe command.

frameid property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:FRAMEID command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:FRAMEID? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:FRAMEID? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:FRAMEID:VALue command.

netmn property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:NETMN command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:NETMN? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:NETMN? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .sleepind: The SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:NETMN:SLEEPIND command.
  • .wakeupind: The SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:NETMN:WAKEUPIND command.

SearchSearchItemTriggerABusCxpiCondition

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:CONDition command.

Description
  • This command sets or queries the trigger condition for a CXPI bus. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:CONDition? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:CONDition? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:CONDition value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:CONDition {STARt|FRAMes|FRAMEID|PTYPe|DLC|EXTDLC|NETMN|COUNter|DATa|ERRors}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:CONDition?
Info
  • STARt specifies STARt as the event for a CXPI frame to search on. This is the default value.
  • FRAMes specifies FRAMes as the frame types for CXPI packets to search on.
  • FRAMEID specifies FRAMEID as the field within a CXPI frame to search on.
  • PTYPe specifies PTYPe as the field within a CXPI frame to search on.
  • DLC specifies DLC as the field within a CXPI frame to search on.
  • EXTDLC specifies EXTDLC as the field within a CXPI frame to search on.
  • NETMN specifies NETMN as the field within a CXPI frame to search on.
  • COUNter specifies COUNter as the field within a CXPI frame to search on.
  • DATa specifies DATa as the field within a CXPI frame to search on.
  • ERRors specifies ERRors as type of error within a CXPI frame to search on.

SearchSearchItemTriggerABusCxpiCounter

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:COUNter command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:COUNter? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:COUNter? query and raise an AssertionError if the returned value does not match value.
Properties
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:COUNter:VALue command.

value property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:COUNter:VALue command.

Description
  • This command specifies the binary counter string used for CXPI triggering if the trigger condition is COUNTER. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:COUNter:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:COUNter:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:COUNter:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:COUNter:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:COUNter:VALue?
Info
  • <QString> specifies the binary counter string. The default size and value Counter is 2 bits and ‘XX’ respectively.

SearchSearchItemTriggerABusCxpiCounterValue

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:COUNter:VALue command.

Description
  • This command specifies the binary counter string used for CXPI triggering if the trigger condition is COUNTER. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:COUNter:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:COUNter:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:COUNter:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:COUNter:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:COUNter:VALue?
Info
  • <QString> specifies the binary counter string. The default size and value Counter is 2 bits and ‘XX’ respectively.

SearchSearchItemTriggerABusCxpiData

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:DATa command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:DATa? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:DATa? query and raise an AssertionError if the returned value does not match value.
Properties
  • .size: The SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:DATa:SIZe command.
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:DATa:VALue command.

size property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:DATa:SIZe command.

Description
  • This command specifies the length of the data string in bytes to be used for CXPI triggering if the trigger condition is DATA. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:DATa:SIZe? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:DATa:SIZe? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:DATa:SIZe value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:DATa:SIZe <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:DATa:SIZe?
Info
  • <NR1> specifies the data size. The default data size is 1 and the calid range is 1 to 5.

value property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:DATa:VALue command.

Description
  • This command specifies the binary data string used for CXPI triggering if the trigger condition is DATA. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:DATa:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:DATa:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:DATa:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:DATa:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:DATa:VALue?
Info
  • <QString> is the identifier value. The default size and value for DATA is 8bits and ‘XXXX XXXX’ respectively.

SearchSearchItemTriggerABusCxpiDataSize

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:DATa:SIZe command.

Description
  • This command specifies the length of the data string in bytes to be used for CXPI triggering if the trigger condition is DATA. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:DATa:SIZe? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:DATa:SIZe? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:DATa:SIZe value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:DATa:SIZe <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:DATa:SIZe?
Info
  • <NR1> specifies the data size. The default data size is 1 and the calid range is 1 to 5.

SearchSearchItemTriggerABusCxpiDataValue

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:DATa:VALue command.

Description
  • This command specifies the binary data string used for CXPI triggering if the trigger condition is DATA. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:DATa:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:DATa:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:DATa:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:DATa:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:DATa:VALue?
Info
  • <QString> is the identifier value. The default size and value for DATA is 8bits and ‘XXXX XXXX’ respectively.

SearchSearchItemTriggerABusCxpiDlc

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:DLC command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:DLC? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:DLC? query and raise an AssertionError if the returned value does not match value.
Properties
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:DLC:VALue command.

value property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:DLC:VALue command.

Description
  • This command specifies the binary DLC string used for CXPI triggering if the trigger condition is DLC. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:DLC:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:DLC:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:DLC:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:DLC:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:DLC:VALue?
Info
  • <QString> is the identifier value. The default size and value of DLC is 4 bits and ‘XXXX’ respectively.

SearchSearchItemTriggerABusCxpiDlcValue

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:DLC:VALue command.

Description
  • This command specifies the binary DLC string used for CXPI triggering if the trigger condition is DLC. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:DLC:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:DLC:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:DLC:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:DLC:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:DLC:VALue?
Info
  • <QString> is the identifier value. The default size and value of DLC is 4 bits and ‘XXXX’ respectively.

SearchSearchItemTriggerABusCxpiError

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:ERROR command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:ERROR? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:ERROR? query and raise an AssertionError if the returned value does not match value.
Properties
  • .type: The SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:ERROR:TYPe command.

type property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:ERROR:TYPe command.

Description
  • This command sets or queries the Error Type in CXPI bus. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:ERROR:TYPe? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:ERROR:TYPe? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:ERROR:TYPe value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:ERROR:TYPe {CRC|PARity|FRAMe|IBS|ANY}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:ERROR:TYPe?
Info
  • CRC specifies CRC as the field within a CXPI frame to search on.
  • PARity specifies PARity as the field within a CXPI frame to search on. The default Error Type is Parity.
  • FRAMe specifies FRAMe as the field within a CXPI frame to search on.
  • IBS specifies IBS as the field within a CXPI frame to search on.
  • ANY specifies ANY as any type of error within a CXPI frame to search on.

SearchSearchItemTriggerABusCxpiErrorType

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:ERROR:TYPe command.

Description
  • This command sets or queries the Error Type in CXPI bus. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:ERROR:TYPe? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:ERROR:TYPe? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:ERROR:TYPe value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:ERROR:TYPe {CRC|PARity|FRAMe|IBS|ANY}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:ERROR:TYPe?
Info
  • CRC specifies CRC as the field within a CXPI frame to search on.
  • PARity specifies PARity as the field within a CXPI frame to search on. The default Error Type is Parity.
  • FRAMe specifies FRAMe as the field within a CXPI frame to search on.
  • IBS specifies IBS as the field within a CXPI frame to search on.
  • ANY specifies ANY as any type of error within a CXPI frame to search on.

SearchSearchItemTriggerABusCxpiExtdlc

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:EXTDLC command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:EXTDLC? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:EXTDLC? query and raise an AssertionError if the returned value does not match value.
Properties
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:EXTDLC:VALue command.

value property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:EXTDLC:VALue command.

Description
  • This command specifies the binary DLC string used for CXPI triggering if the trigger condition is Ext DLC. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:EXTDLC:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:EXTDLC:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:EXTDLC:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:EXTDLC:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:EXTDLC:VALue?
Info
  • <QString> is the identifier value. The default size and value of Ext DLC is 8 bits and ‘XXXX XXXX’ respectively.

SearchSearchItemTriggerABusCxpiExtdlcValue

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:EXTDLC:VALue command.

Description
  • This command specifies the binary DLC string used for CXPI triggering if the trigger condition is Ext DLC. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:EXTDLC:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:EXTDLC:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:EXTDLC:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:EXTDLC:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:EXTDLC:VALue?
Info
  • <QString> is the identifier value. The default size and value of Ext DLC is 8 bits and ‘XXXX XXXX’ respectively.

SearchSearchItemTriggerABusCxpiFrame

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:FRAMe command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:FRAMe? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:FRAMe? query and raise an AssertionError if the returned value does not match value.
Properties
  • .type: The SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:FRAMe:TYPe command.

type property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:FRAMe:TYPe command.

Description
  • This command sets or queries the frame type in CXPI bus. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:FRAMe:TYPe? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:FRAMe:TYPe? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:FRAMe:TYPe value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:FRAMe:TYPe {NORMal|SLEep|LONG|POLLINGNORMal|POLLINGLONG}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:FRAMe:TYPe?
Info
  • NORMal specifies NORMal as the packet type CXPI frame to search on. The default frame type is normal.
  • SLEep specifies SLEep as the packet type CXPI frame to search on.
  • LONG specifies LONG as the packet type CXPI frame to search on.
  • POLLINGNORMal specifies POLLINGNORMal as the packet type CXPI frame to search on.
  • POLLINGLONG specifies POLLINGLONG as the packet type CXPI frame to search on.

SearchSearchItemTriggerABusCxpiFrameType

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:FRAMe:TYPe command.

Description
  • This command sets or queries the frame type in CXPI bus. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:FRAMe:TYPe? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:FRAMe:TYPe? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:FRAMe:TYPe value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:FRAMe:TYPe {NORMal|SLEep|LONG|POLLINGNORMal|POLLINGLONG}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:FRAMe:TYPe?
Info
  • NORMal specifies NORMal as the packet type CXPI frame to search on. The default frame type is normal.
  • SLEep specifies SLEep as the packet type CXPI frame to search on.
  • LONG specifies LONG as the packet type CXPI frame to search on.
  • POLLINGNORMal specifies POLLINGNORMal as the packet type CXPI frame to search on.
  • POLLINGLONG specifies POLLINGLONG as the packet type CXPI frame to search on.

SearchSearchItemTriggerABusCxpiFrameid

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:FRAMEID command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:FRAMEID? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:FRAMEID? query and raise an AssertionError if the returned value does not match value.
Properties
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:FRAMEID:VALue command.

value property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:FRAMEID:VALue command.

Description
  • This command specifies the binary frameId string used for CXPI triggering if the trigger condition is FRAMEID. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:FRAMEID:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:FRAMEID:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:FRAMEID:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:FRAMEID:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:FRAMEID:VALue?
Info
  • <QString> is the identifier value. The default size and value of frame ID is 7 bits and ‘XXX XXXX’ respectively.

SearchSearchItemTriggerABusCxpiFrameidValue

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:FRAMEID:VALue command.

Description
  • This command specifies the binary frameId string used for CXPI triggering if the trigger condition is FRAMEID. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:FRAMEID:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:FRAMEID:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:FRAMEID:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:FRAMEID:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:FRAMEID:VALue?
Info
  • <QString> is the identifier value. The default size and value of frame ID is 7 bits and ‘XXX XXXX’ respectively.

SearchSearchItemTriggerABusCxpiNetmn

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:NETMN command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:NETMN? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:NETMN? query and raise an AssertionError if the returned value does not match value.
Properties
  • .sleepind: The SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:NETMN:SLEEPIND command.
  • .wakeupind: The SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:NETMN:WAKEUPIND command.

sleepind property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:NETMN:SLEEPIND command.

Description
  • This command sets or queries the Sleep Status in CXPI bus. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:NETMN:SLEEPIND? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:NETMN:SLEEPIND? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:NETMN:SLEEPIND value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:NETMN:SLEEPIND {ON|OFF|EITHer}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:NETMN:SLEEPIND?
Info
  • ON specifies the Sleep Status as on. The default status is on.
  • OFF specifies the Sleep Status as off.
  • EITHer specifies the Sleep Status as either.

wakeupind property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:NETMN:WAKEUPIND command.

Description
  • This command sets or queries the Wakeup Status in CXPI bus. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:NETMN:WAKEUPIND? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:NETMN:WAKEUPIND? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:NETMN:WAKEUPIND value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:NETMN:WAKEUPIND {ON|OFF|EITHer}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:NETMN:WAKEUPIND?
Info
  • ON specifies the Wakeup Status as on. The default status is on.
  • OFF specifies the Wakeup Status as off.
  • EITHer specifies the Wakeup Status as either.

SearchSearchItemTriggerABusCxpiNetmnSleepind

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:NETMN:SLEEPIND command.

Description
  • This command sets or queries the Sleep Status in CXPI bus. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:NETMN:SLEEPIND? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:NETMN:SLEEPIND? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:NETMN:SLEEPIND value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:NETMN:SLEEPIND {ON|OFF|EITHer}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:NETMN:SLEEPIND?
Info
  • ON specifies the Sleep Status as on. The default status is on.
  • OFF specifies the Sleep Status as off.
  • EITHer specifies the Sleep Status as either.

SearchSearchItemTriggerABusCxpiNetmnWakeupind

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:NETMN:WAKEUPIND command.

Description
  • This command sets or queries the Wakeup Status in CXPI bus. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:NETMN:WAKEUPIND? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:NETMN:WAKEUPIND? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:NETMN:WAKEUPIND value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:NETMN:WAKEUPIND {ON|OFF|EITHer}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:NETMN:WAKEUPIND?
Info
  • ON specifies the Wakeup Status as on. The default status is on.
  • OFF specifies the Wakeup Status as off.
  • EITHer specifies the Wakeup Status as either.

SearchSearchItemTriggerABusDphy

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY? query and raise an AssertionError if the returned value does not match value.
Properties
  • .blue: The SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:BLUe command tree.
  • .condition: The SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:CONDition command.
  • .data: The SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:DATa command tree.
  • .error: The SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:ERRor command tree.
  • .escapemode: The SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:ESCAPEMODe command tree.
  • .green: The SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:GREen command tree.
  • .mode: The SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:MODe command tree.
  • .packets: The SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:PACKets command tree.
  • .pixel: The SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:PIXel command tree.
  • .red: The SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:RED command tree.
  • .wordcount: The SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:WORDCOUNt command tree.
  • .ycbcr: The SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:YCBCR command tree.
  • .yuv: The SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:YUV command tree.

blue property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:BLUe command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:BLUe? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:BLUe? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:BLUe:VALue command.

condition property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:CONDition command.

Description
  • This command sets or queries the trigger condition for an DPHY bus. The default trigger on condition is SOT.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:CONDition? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:CONDition? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:CONDition value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:CONDition {SOT|EOT|DATa|EOTPDATa|OPTIONALPARam|SCRambling|COMPression|PACKets|BUSTURNAROUnd|ESCAPEMODe|STop|ERRors|MODe}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:CONDition?
Info
  • SOT specifies SOT as the field within a DPHY frame to search on.
  • EOT specifies EOT as the field within a DPHY frame to search on.
  • DATa specifies DATa as the field within a DPHY frame to search on.
  • EOTPDATa specifies EOTPDATa as the field within a DPHY frame to search on.
  • OPTIONALPARam specifies OPTIONALPARam as the field within a DPHY frame to search on.
  • SCRambling specifies SCRambling as the field within a DPHY frame to search on.
  • COMPression specifies COMPression as the field within a DPHY frame to search on.
  • PACKets specifies PACKets as the field within a DPHY frame to search on.
  • BUSTURNAROUnd specifies BUSTURNAROUnd as the field within a DPHY frame to search on.
  • ESCAPEMODe specifies ESCAPEMODe as the field within a DPHY frame to search on.
  • STop specifies STop as the field within a DPHY frame to search on.
  • ERRors specifies ERRors as the field within a DPHY frame to search on.
  • MODe specifies MODe as the field within a DPHY frame to search on.

data property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:DATa command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:DATa? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:DATa? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .size: The SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:DATa:SIZe command.
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:DATa:VALue command.

error property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:ERRor command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:ERRor? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:ERRor? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .type: The SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:ERRor:TYPe command.

escapemode property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:ESCAPEMODe command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:ESCAPEMODe? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:ESCAPEMODe? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .command: The SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:ESCAPEMODe:COMMand command.

green property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:GREen command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:GREen? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:GREen? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:GREen:VALue command.

mode property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:MODe command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:MODe? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:MODe? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .type: The SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:MODe:TYPe command.

packets property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:PACKets command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:PACKets? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:PACKets? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .list: The SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:PACKets:LIST command.
  • .type: The SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:PACKets:TYPe command.

pixel property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:PIXel command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:PIXel? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:PIXel? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .number: The SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:PIXel:NUMBer command.
  • .searchoption: The SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:PIXel:SEARCHOPTion command.

red property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:RED command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:RED? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:RED? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:RED:VALue command.

wordcount property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:WORDCOUNt command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:WORDCOUNt? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:WORDCOUNt? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:WORDCOUNt:VALue command.

ycbcr property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:YCBCR command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:YCBCR? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:YCBCR? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .cb: The SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:YCBCR:CB command.
  • .cr: The SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:YCBCR:CR command.
  • .y: The SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:YCBCR:Y command.

yuv property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:YUV command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:YUV? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:YUV? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .u: The SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:YUV:U command.
  • .v: The SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:YUV:V command.
  • .y: The SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:YUV:Y command.

SearchSearchItemTriggerABusDphyBlue

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:BLUe command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:BLUe? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:BLUe? query and raise an AssertionError if the returned value does not match value.
Properties
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:BLUe:VALue command.

value property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:BLUe:VALue command.

Description
  • This command specifies the blue data string used for DPHY triggering if the trigger condition is on RGB packet.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:BLUe:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:BLUe:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:BLUe:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:BLUe:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:BLUe:VALue?
Info
  • <QString> is the identifier value. The default blue value is XXXXXXXXXX.

SearchSearchItemTriggerABusDphyBlueValue

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:BLUe:VALue command.

Description
  • This command specifies the blue data string used for DPHY triggering if the trigger condition is on RGB packet.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:BLUe:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:BLUe:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:BLUe:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:BLUe:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:BLUe:VALue?
Info
  • <QString> is the identifier value. The default blue value is XXXXXXXXXX.

SearchSearchItemTriggerABusDphyCondition

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:CONDition command.

Description
  • This command sets or queries the trigger condition for an DPHY bus. The default trigger on condition is SOT.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:CONDition? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:CONDition? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:CONDition value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:CONDition {SOT|EOT|DATa|EOTPDATa|OPTIONALPARam|SCRambling|COMPression|PACKets|BUSTURNAROUnd|ESCAPEMODe|STop|ERRors|MODe}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:CONDition?
Info
  • SOT specifies SOT as the field within a DPHY frame to search on.
  • EOT specifies EOT as the field within a DPHY frame to search on.
  • DATa specifies DATa as the field within a DPHY frame to search on.
  • EOTPDATa specifies EOTPDATa as the field within a DPHY frame to search on.
  • OPTIONALPARam specifies OPTIONALPARam as the field within a DPHY frame to search on.
  • SCRambling specifies SCRambling as the field within a DPHY frame to search on.
  • COMPression specifies COMPression as the field within a DPHY frame to search on.
  • PACKets specifies PACKets as the field within a DPHY frame to search on.
  • BUSTURNAROUnd specifies BUSTURNAROUnd as the field within a DPHY frame to search on.
  • ESCAPEMODe specifies ESCAPEMODe as the field within a DPHY frame to search on.
  • STop specifies STop as the field within a DPHY frame to search on.
  • ERRors specifies ERRors as the field within a DPHY frame to search on.
  • MODe specifies MODe as the field within a DPHY frame to search on.

SearchSearchItemTriggerABusDphyData

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:DATa command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:DATa? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:DATa? query and raise an AssertionError if the returned value does not match value.
Properties
  • .size: The SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:DATa:SIZe command.
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:DATa:VALue command.

size property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:DATa:SIZe command.

Description
  • This command specifies the length of the data string in bytes to be used for an DPHY trigger if the trigger condition is DATA. The default data size is 1 byte and ranges between 1 and 5. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:DATa:SIZe? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:DATa:SIZe? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:DATa:SIZe value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:DATa:SIZe <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:DATa:SIZe?
Info
  • <NR1> specifies the data size.

value property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:DATa:VALue command.

Description
  • This command specifies the binary data string used for DPHY triggering if the trigger condition is DATA.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:DATa:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:DATa:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:DATa:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:DATa:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:DATa:VALue?
Info
  • <QString> is the identifier value. The default value is XXXXXXXX.

SearchSearchItemTriggerABusDphyDataSize

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:DATa:SIZe command.

Description
  • This command specifies the length of the data string in bytes to be used for an DPHY trigger if the trigger condition is DATA. The default data size is 1 byte and ranges between 1 and 5. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:DATa:SIZe? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:DATa:SIZe? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:DATa:SIZe value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:DATa:SIZe <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:DATa:SIZe?
Info
  • <NR1> specifies the data size.

SearchSearchItemTriggerABusDphyDataValue

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:DATa:VALue command.

Description
  • This command specifies the binary data string used for DPHY triggering if the trigger condition is DATA.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:DATa:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:DATa:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:DATa:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:DATa:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:DATa:VALue?
Info
  • <QString> is the identifier value. The default value is XXXXXXXX.

SearchSearchItemTriggerABusDphyError

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:ERRor command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:ERRor? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:ERRor? query and raise an AssertionError if the returned value does not match value.
Properties
  • .type: The SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:ERRor:TYPe command.

type property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:ERRor:TYPe command.

Description
  • This command sets or queries the error type for DPHY bus. The default error type condition is ANY.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:ERRor:TYPe? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:ERRor:TYPe? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:ERRor:TYPe value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:ERRor:TYPe {ANY|ECC|CRC}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:ERRor:TYPe?
Info
  • ANY specifies ANY as the field within a DPHY frame to search on.
  • ECC specifies ECC as the field within a DPHY frame to search on.
  • CRC specifies CRC as the field within a DPHY frame to search on.

SearchSearchItemTriggerABusDphyErrorType

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:ERRor:TYPe command.

Description
  • This command sets or queries the error type for DPHY bus. The default error type condition is ANY.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:ERRor:TYPe? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:ERRor:TYPe? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:ERRor:TYPe value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:ERRor:TYPe {ANY|ECC|CRC}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:ERRor:TYPe?
Info
  • ANY specifies ANY as the field within a DPHY frame to search on.
  • ECC specifies ECC as the field within a DPHY frame to search on.
  • CRC specifies CRC as the field within a DPHY frame to search on.

SearchSearchItemTriggerABusDphyEscapemode

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:ESCAPEMODe command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:ESCAPEMODe? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:ESCAPEMODe? query and raise an AssertionError if the returned value does not match value.
Properties
  • .command: The SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:ESCAPEMODe:COMMand command.

command property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:ESCAPEMODe:COMMand command.

Description
  • This command sets or queries the escape mode command type for DPHY bus.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:ESCAPEMODe:COMMand? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:ESCAPEMODe:COMMand? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:ESCAPEMODe:COMMand value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:ESCAPEMODe:COMMand {LPDT|ULPS|RESETTRIGger|ANY}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:ESCAPEMODe:COMMand?
Info
  • LPDT specifies LPDT as the field within a DPHY frame to search on.
  • ULPS specifies ULPS as the field within a DPHY frame to search on.
  • RESETTRIGger specifies RESETTRIGger as the field within a DPHY frame to search on.
  • ANY specifies ANY as the field within a DPHY frame to search on. ANY is the default value.

SearchSearchItemTriggerABusDphyEscapemodeCommand

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:ESCAPEMODe:COMMand command.

Description
  • This command sets or queries the escape mode command type for DPHY bus.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:ESCAPEMODe:COMMand? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:ESCAPEMODe:COMMand? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:ESCAPEMODe:COMMand value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:ESCAPEMODe:COMMand {LPDT|ULPS|RESETTRIGger|ANY}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:ESCAPEMODe:COMMand?
Info
  • LPDT specifies LPDT as the field within a DPHY frame to search on.
  • ULPS specifies ULPS as the field within a DPHY frame to search on.
  • RESETTRIGger specifies RESETTRIGger as the field within a DPHY frame to search on.
  • ANY specifies ANY as the field within a DPHY frame to search on. ANY is the default value.

SearchSearchItemTriggerABusDphyGreen

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:GREen command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:GREen? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:GREen? query and raise an AssertionError if the returned value does not match value.
Properties
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:GREen:VALue command.

value property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:GREen:VALue command.

Description
  • This command specifies the green data string used for DPHY triggering if the trigger condition is on RGB packet.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:GREen:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:GREen:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:GREen:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:GREen:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:GREen:VALue?
Info
  • <QString> is the identifier value. The default green value is XXXXXXXXXX.

SearchSearchItemTriggerABusDphyGreenValue

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:GREen:VALue command.

Description
  • This command specifies the green data string used for DPHY triggering if the trigger condition is on RGB packet.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:GREen:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:GREen:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:GREen:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:GREen:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:GREen:VALue?
Info
  • <QString> is the identifier value. The default green value is XXXXXXXXXX.

SearchSearchItemTriggerABusDphyMode

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:MODe command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:MODe? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:MODe? query and raise an AssertionError if the returned value does not match value.
Properties
  • .type: The SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:MODe:TYPe command.

type property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:MODe:TYPe command.

Description
  • This command sets or queries the mode type for DPHY bus. The default mode type condition is HS.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:MODe:TYPe? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:MODe:TYPe? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:MODe:TYPe value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:MODe:TYPe {HS|LP}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:MODe:TYPe?
Info
  • HS specifies HS as the mode within a DPHY frame to search on. HS is default mode type condition.
  • LP specifies LP as the mode within a DPHY frame to search on.

SearchSearchItemTriggerABusDphyModeType

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:MODe:TYPe command.

Description
  • This command sets or queries the mode type for DPHY bus. The default mode type condition is HS.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:MODe:TYPe? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:MODe:TYPe? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:MODe:TYPe value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:MODe:TYPe {HS|LP}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:MODe:TYPe?
Info
  • HS specifies HS as the mode within a DPHY frame to search on. HS is default mode type condition.
  • LP specifies LP as the mode within a DPHY frame to search on.

SearchSearchItemTriggerABusDphyPackets

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:PACKets command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:PACKets? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:PACKets? query and raise an AssertionError if the returned value does not match value.
Properties
  • .list: The SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:PACKets:LIST command.
  • .type: The SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:PACKets:TYPe command.

list property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:PACKets:LIST command.

Description
  • This command sets or queries the packet list for DPHY bus. The default packet list condition is VSYNCSTART.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:PACKets:LIST? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:PACKets:LIST? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:PACKets:LIST value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:PACKets:LIST {VSYNCSTART|VSYNCEND|HSYNCSTART|HSYNCEND|EOTP|COLOROFF|COLORON|SHUTDOWN|TURNON|GSW|GR|COMPRESSION|SCRAMBLING|EXECUTEQUEue|DCSSW|DCSR|GLONGWRITE|DSINULL|DSIBLANk|MAXRETSIZE|DCSGLONGWRITE|PICPARameter|COMPRESSEDPSTReam|PPS101010|PPS121212|PPS565|PPS666|LPS666|PPS888|YCBCR24|LPYCBCR24|YCBCR16|YCBCR12|ACKNowledge|ERRORREPort|GSRR|GLONGREAD|DCSLONGREAD|DCSSRR|FRAMESTARt|FRAMEEND|LINESTARt|LINEEND|GSP|CSINULL|CSIBLANk|EMBEDDED|USEREIGHTB|RGB565|RGB555|RGB444|RGB666|RAW6|RAW7|RAW8|RAW10|RAW12|RAW14|RAW16|RAW20|RGB888|YUV420L8|YUV8BIT|YUV422B10|YUV420B10}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:PACKets:LIST?
Info
  • VSYNCSTART specifies VSYNCSTART as the packet within DPHY frame to search on.
  • VSYNCEND specifies VSYNCEND as the packet within DPHY frame to search on.
  • HSYNCSTART specifies HSYNCSTART as the packet within DPHY frame to search on.
  • HSYNCEND specifies HSYNCEND as the packet within DPHY frame to search on.
  • EOTP specifies EOTP as the packet within DPHY frame to search on.
  • COLOROFF specifies COLOROFF as the packet within DPHY frame to search on.
  • COLORON specifies COLORON as the packet within DPHY frame to search on.
  • SHUTDOWN specifies SHUTDOWN as the packet within DPHY frame to search on.
  • TURNON specifies TURNON as the packet within DPHY frame to search on.
  • GSW specifies GSW as the packet within DPHY frame to search on.
  • GR specifies GR as the packet within DPHY frame to search on.
  • COMPRESSION specifies COMPRESSION as the packet within DPHY frame to search on.
  • SCRAMBLING specifies SCRAMBLING as the packet within DPHY frame tosearch on.
  • EXECUTEQUEue specifies EXECUTEQUEue as the packet within DPHY frame to search on.
  • DCSSW specifies DCSSW as the packet within DPHY frame to search on.
  • DCSR specifies DCSR as the packet within DPHY frame to search on.
  • GLONGWRITE specifies GLONGWRITE as the packet within DPHY frame to search on.
  • DSINULL specifies DSINULL as the packet within DPHY frame to search on.
  • DSIBLANk specifies DSIBLANk as the packet within DPHY frame to search on.
  • MAXRETSIZE specifies MAXRETSIZE as the packet within DPHY frame to search on.
  • DCSGLONGWRITE specifies DCSGLONGWRITE as the packet within DPHY frame to search on.
  • PICPARameter specifies PICPARameter as the packet within DPHY frame to search on.
  • COMPRESSEDPSTReam specifies COMPRESSEDPSTReam as the packet within.
  • DPHY frame to search on.
  • PPS101010 specifies PPS101010 as the packet within DPHY frame to search on.
  • PPS121212 specifies PPS121212 as the packet within DPHY frame to search on.
  • PPS565 specifies PPS565 as the packet within DPHY frame to search on.
  • PPS666 specifies PPS666 as the packet within DPHY frame to search on.
  • LPS666 specifies LPS666 as the packet within DPHY frame to search on.
  • PPS888 specifies LPS666 as the packet within DPHY frame to search on.
  • YCBCR24 specifies YCBCR24 as the packet within DPHY frame to search on.
  • LPYCBCR24 specifies LPYCBCR24 as the packet within DPHY frame to search on.
  • YCBCR16 specifies YCBCR16 as the packet within DPHY frame to search on.
  • YCBCR12 specifies YCBCR12 as the packet within DPHY frame to search on.
  • ACKNowledge specifies ACKNowledge as the packet within DPHY frame to search on.
  • ERRORREPort specifies ERRORREPort as the packet within DPHY frame to search on.
  • GSRR specifies GSRR as the packet within DPHY frame to search on.
  • GLONGREAD specifies GLONGREAD as the packet within DPHY frame to search on.
  • DCSLONGREAD specifies DCSLONGREAD as the packet within DPHY frame to search on.
  • DCSSRR specifies DCSSRR as the packet within DPHY frame to search on.
  • FRAMESTARt specifies FRAMESTARt as the packet within DPHY frame to search on.
  • FRAMEEND specifies FRAMEEND as the packet within DPHY frame to search on.
  • LINESTARt specifies LINESTARt as the packet within DPHY frame to search on.
  • LINEEND specifies LINEEND as the packet within DPHY frame to search on.
  • GSP specifies GSP as the packet within DPHY frame to search on.
  • CSINULL specifies CSINULL as the packet within DPHY frame to search on.
  • CSIBLANk specifies CSIBLANk as the packet within DPHY frame to search on.
  • EMBEDDED specifies EMBEDDED as the packet within DPHY frame to search on.
  • USEREIGHTB specifies USEREIGHTB as the packet within DPHY frame to search on.
  • RGB565 specifies RGB565 as the packet within DPHY frame to search on.
  • RGB555 specifies RGB555 as the packet within DPHY frame to search on.
  • RGB444 specifies RGB444 as the packet within DPHY frame to search on.
  • RGB666 specifies RGB666 as the packet within DPHY frame to search on.
  • RAW6 specifies RAW6 as the packet within DPHY frame to search on.
  • RAW7 specifies RAW7 as the packet within DPHY frame to search on.
  • RAW8 specifies RAW8 as the packet within DPHY frame to search on.
  • RAW10 specifies RAW10 as the packet within DPHY frame to search on.
  • RAW12 specifies RAW12 as the packet within DPHY frame to search on.
  • RAW14 specifies RAW14 as the packet within DPHY frame to search on.
  • RAW16 specifies RAW16 as the packet within DPHY frame to search on.
  • RAW20 specifies RAW20 as the packet within DPHY frame to search on.
  • RGB888 specifies RGB888 as the packet within DPHY frame to search on.
  • YUV420L8 specifies YUV420L8 as the packet within DPHY frame to search on.
  • YUV8BIT specifies YUV8BIT as the packet within DPHY frame to search on.
  • YUV422B10 specifies YUV422B10 as the packet within DPHY frame to search on.
  • YUV420B10 specifies YUV420B10 as the packet within DPHY frame to search on.

type property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:PACKets:TYPe command.

Description
  • This command sets or queries the packet type for DPHY bus. The default packet type condition is SHORt.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:PACKets:TYPe? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:PACKets:TYPe? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:PACKets:TYPe value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:PACKets:TYPe {SHORt|LONG}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:PACKets:TYPe?
Info
  • SHORt specifies SHORt as the field within a DPHY frame to search on. SHORt is the default packet type condition.
  • LONG specifies LONG as the field within a DPHY frame to search on.

SearchSearchItemTriggerABusDphyPacketsList

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:PACKets:LIST command.

Description
  • This command sets or queries the packet list for DPHY bus. The default packet list condition is VSYNCSTART.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:PACKets:LIST? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:PACKets:LIST? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:PACKets:LIST value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:PACKets:LIST {VSYNCSTART|VSYNCEND|HSYNCSTART|HSYNCEND|EOTP|COLOROFF|COLORON|SHUTDOWN|TURNON|GSW|GR|COMPRESSION|SCRAMBLING|EXECUTEQUEue|DCSSW|DCSR|GLONGWRITE|DSINULL|DSIBLANk|MAXRETSIZE|DCSGLONGWRITE|PICPARameter|COMPRESSEDPSTReam|PPS101010|PPS121212|PPS565|PPS666|LPS666|PPS888|YCBCR24|LPYCBCR24|YCBCR16|YCBCR12|ACKNowledge|ERRORREPort|GSRR|GLONGREAD|DCSLONGREAD|DCSSRR|FRAMESTARt|FRAMEEND|LINESTARt|LINEEND|GSP|CSINULL|CSIBLANk|EMBEDDED|USEREIGHTB|RGB565|RGB555|RGB444|RGB666|RAW6|RAW7|RAW8|RAW10|RAW12|RAW14|RAW16|RAW20|RGB888|YUV420L8|YUV8BIT|YUV422B10|YUV420B10}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:PACKets:LIST?
Info
  • VSYNCSTART specifies VSYNCSTART as the packet within DPHY frame to search on.
  • VSYNCEND specifies VSYNCEND as the packet within DPHY frame to search on.
  • HSYNCSTART specifies HSYNCSTART as the packet within DPHY frame to search on.
  • HSYNCEND specifies HSYNCEND as the packet within DPHY frame to search on.
  • EOTP specifies EOTP as the packet within DPHY frame to search on.
  • COLOROFF specifies COLOROFF as the packet within DPHY frame to search on.
  • COLORON specifies COLORON as the packet within DPHY frame to search on.
  • SHUTDOWN specifies SHUTDOWN as the packet within DPHY frame to search on.
  • TURNON specifies TURNON as the packet within DPHY frame to search on.
  • GSW specifies GSW as the packet within DPHY frame to search on.
  • GR specifies GR as the packet within DPHY frame to search on.
  • COMPRESSION specifies COMPRESSION as the packet within DPHY frame to search on.
  • SCRAMBLING specifies SCRAMBLING as the packet within DPHY frame tosearch on.
  • EXECUTEQUEue specifies EXECUTEQUEue as the packet within DPHY frame to search on.
  • DCSSW specifies DCSSW as the packet within DPHY frame to search on.
  • DCSR specifies DCSR as the packet within DPHY frame to search on.
  • GLONGWRITE specifies GLONGWRITE as the packet within DPHY frame to search on.
  • DSINULL specifies DSINULL as the packet within DPHY frame to search on.
  • DSIBLANk specifies DSIBLANk as the packet within DPHY frame to search on.
  • MAXRETSIZE specifies MAXRETSIZE as the packet within DPHY frame to search on.
  • DCSGLONGWRITE specifies DCSGLONGWRITE as the packet within DPHY frame to search on.
  • PICPARameter specifies PICPARameter as the packet within DPHY frame to search on.
  • COMPRESSEDPSTReam specifies COMPRESSEDPSTReam as the packet within.
  • DPHY frame to search on.
  • PPS101010 specifies PPS101010 as the packet within DPHY frame to search on.
  • PPS121212 specifies PPS121212 as the packet within DPHY frame to search on.
  • PPS565 specifies PPS565 as the packet within DPHY frame to search on.
  • PPS666 specifies PPS666 as the packet within DPHY frame to search on.
  • LPS666 specifies LPS666 as the packet within DPHY frame to search on.
  • PPS888 specifies LPS666 as the packet within DPHY frame to search on.
  • YCBCR24 specifies YCBCR24 as the packet within DPHY frame to search on.
  • LPYCBCR24 specifies LPYCBCR24 as the packet within DPHY frame to search on.
  • YCBCR16 specifies YCBCR16 as the packet within DPHY frame to search on.
  • YCBCR12 specifies YCBCR12 as the packet within DPHY frame to search on.
  • ACKNowledge specifies ACKNowledge as the packet within DPHY frame to search on.
  • ERRORREPort specifies ERRORREPort as the packet within DPHY frame to search on.
  • GSRR specifies GSRR as the packet within DPHY frame to search on.
  • GLONGREAD specifies GLONGREAD as the packet within DPHY frame to search on.
  • DCSLONGREAD specifies DCSLONGREAD as the packet within DPHY frame to search on.
  • DCSSRR specifies DCSSRR as the packet within DPHY frame to search on.
  • FRAMESTARt specifies FRAMESTARt as the packet within DPHY frame to search on.
  • FRAMEEND specifies FRAMEEND as the packet within DPHY frame to search on.
  • LINESTARt specifies LINESTARt as the packet within DPHY frame to search on.
  • LINEEND specifies LINEEND as the packet within DPHY frame to search on.
  • GSP specifies GSP as the packet within DPHY frame to search on.
  • CSINULL specifies CSINULL as the packet within DPHY frame to search on.
  • CSIBLANk specifies CSIBLANk as the packet within DPHY frame to search on.
  • EMBEDDED specifies EMBEDDED as the packet within DPHY frame to search on.
  • USEREIGHTB specifies USEREIGHTB as the packet within DPHY frame to search on.
  • RGB565 specifies RGB565 as the packet within DPHY frame to search on.
  • RGB555 specifies RGB555 as the packet within DPHY frame to search on.
  • RGB444 specifies RGB444 as the packet within DPHY frame to search on.
  • RGB666 specifies RGB666 as the packet within DPHY frame to search on.
  • RAW6 specifies RAW6 as the packet within DPHY frame to search on.
  • RAW7 specifies RAW7 as the packet within DPHY frame to search on.
  • RAW8 specifies RAW8 as the packet within DPHY frame to search on.
  • RAW10 specifies RAW10 as the packet within DPHY frame to search on.
  • RAW12 specifies RAW12 as the packet within DPHY frame to search on.
  • RAW14 specifies RAW14 as the packet within DPHY frame to search on.
  • RAW16 specifies RAW16 as the packet within DPHY frame to search on.
  • RAW20 specifies RAW20 as the packet within DPHY frame to search on.
  • RGB888 specifies RGB888 as the packet within DPHY frame to search on.
  • YUV420L8 specifies YUV420L8 as the packet within DPHY frame to search on.
  • YUV8BIT specifies YUV8BIT as the packet within DPHY frame to search on.
  • YUV422B10 specifies YUV422B10 as the packet within DPHY frame to search on.
  • YUV420B10 specifies YUV420B10 as the packet within DPHY frame to search on.

SearchSearchItemTriggerABusDphyPacketsType

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:PACKets:TYPe command.

Description
  • This command sets or queries the packet type for DPHY bus. The default packet type condition is SHORt.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:PACKets:TYPe? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:PACKets:TYPe? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:PACKets:TYPe value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:PACKets:TYPe {SHORt|LONG}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:PACKets:TYPe?
Info
  • SHORt specifies SHORt as the field within a DPHY frame to search on. SHORt is the default packet type condition.
  • LONG specifies LONG as the field within a DPHY frame to search on.

SearchSearchItemTriggerABusDphyPixel

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:PIXel command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:PIXel? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:PIXel? query and raise an AssertionError if the returned value does not match value.
Properties
  • .number: The SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:PIXel:NUMBer command.
  • .searchoption: The SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:PIXel:SEARCHOPTion command.

number property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:PIXel:NUMBer command.

Description
  • This command specifies the pixel number to be used for DPHY triggering if the trigger condition is on pixel number pattern. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:PIXel:NUMBer? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:PIXel:NUMBer? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:PIXel:NUMBer value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:PIXel:NUMBer <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:PIXel:NUMBer?
Info
  • <NR1> specifies the pixel number. The default pixel number value is 0.

searchoption property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:PIXel:SEARCHOPTion command.

Description
  • This command sets or queries the search pattern type for DPHY bus. The default search pattern type value is PIXELVALue.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:PIXel:SEARCHOPTion? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:PIXel:SEARCHOPTion? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:PIXel:SEARCHOPTion value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:PIXel:SEARCHOPTion {PIXELVALue|PIXELNUMBer}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:PIXel:SEARCHOPTion?
Info
  • PIXELVALue specifies PIXELVALue as the field within a DPHY frame to search on.
  • PIXELNUMBer specifies PIXELNUMBer as the field within a DPHY frame to search on.

SearchSearchItemTriggerABusDphyPixelNumber

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:PIXel:NUMBer command.

Description
  • This command specifies the pixel number to be used for DPHY triggering if the trigger condition is on pixel number pattern. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:PIXel:NUMBer? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:PIXel:NUMBer? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:PIXel:NUMBer value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:PIXel:NUMBer <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:PIXel:NUMBer?
Info
  • <NR1> specifies the pixel number. The default pixel number value is 0.

SearchSearchItemTriggerABusDphyPixelSearchoption

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:PIXel:SEARCHOPTion command.

Description
  • This command sets or queries the search pattern type for DPHY bus. The default search pattern type value is PIXELVALue.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:PIXel:SEARCHOPTion? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:PIXel:SEARCHOPTion? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:PIXel:SEARCHOPTion value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:PIXel:SEARCHOPTion {PIXELVALue|PIXELNUMBer}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:PIXel:SEARCHOPTion?
Info
  • PIXELVALue specifies PIXELVALue as the field within a DPHY frame to search on.
  • PIXELNUMBer specifies PIXELNUMBer as the field within a DPHY frame to search on.

SearchSearchItemTriggerABusDphyRed

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:RED command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:RED? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:RED? query and raise an AssertionError if the returned value does not match value.
Properties
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:RED:VALue command.

value property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:RED:VALue command.

Description
  • This command specifies the red data string used for DPHY triggering if the trigger condition is on RGB packet.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:RED:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:RED:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:RED:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:RED:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:RED:VALue?
Info
  • <QString> is the identifier value. The default red value is XXXXXXXXXX.

SearchSearchItemTriggerABusDphyRedValue

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:RED:VALue command.

Description
  • This command specifies the red data string used for DPHY triggering if the trigger condition is on RGB packet.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:RED:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:RED:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:RED:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:RED:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:RED:VALue?
Info
  • <QString> is the identifier value. The default red value is XXXXXXXXXX.

SearchSearchItemTriggerABusDphyWordcount

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:WORDCOUNt command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:WORDCOUNt? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:WORDCOUNt? query and raise an AssertionError if the returned value does not match value.
Properties
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:WORDCOUNt:VALue command.

value property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:WORDCOUNt:VALue command.

Description
  • This command specifies the word count data string used for DPHY triggering if the trigger condition is set on any pixel packet.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:WORDCOUNt:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:WORDCOUNt:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:WORDCOUNt:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:WORDCOUNt:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:WORDCOUNt:VALue?
Info
  • <QString> is the identifier value. The default word count value is XXXXXXXXXXXXXXXX.

SearchSearchItemTriggerABusDphyWordcountValue

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:WORDCOUNt:VALue command.

Description
  • This command specifies the word count data string used for DPHY triggering if the trigger condition is set on any pixel packet.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:WORDCOUNt:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:WORDCOUNt:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:WORDCOUNt:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:WORDCOUNt:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:WORDCOUNt:VALue?
Info
  • <QString> is the identifier value. The default word count value is XXXXXXXXXXXXXXXX.

SearchSearchItemTriggerABusDphyYcbcr

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:YCBCR command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:YCBCR? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:YCBCR? query and raise an AssertionError if the returned value does not match value.
Properties
  • .cb: The SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:YCBCR:CB command.
  • .cr: The SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:YCBCR:CR command.
  • .y: The SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:YCBCR:Y command.

cb property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:YCBCR:CB command.

Description
  • This command specifies the Cb data string used for DPHY triggering if the trigger condition is on YCbCr packet.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:YCBCR:CB? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:YCBCR:CB? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:YCBCR:CB value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:YCBCR:CB <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:YCBCR:CB?
Info
  • <QString> is the identifier value. The default YCBCR packets CB value is XXXXXXXXXX.

cr property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:YCBCR:CR command.

Description
  • This command specifies the Cr data string used for DPHY triggering if the trigger condition is on YCbCr packet.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:YCBCR:CR? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:YCBCR:CR? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:YCBCR:CR value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:YCBCR:CR <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:YCBCR:CR?
Info
  • <QString> is the identifier value. The default YCBCR packets CR value is XXXXXXXXXX.

y property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:YCBCR:Y command.

Description
  • This command specifies the Y data string used for DPHY triggering if the trigger condition is on YCbCr packet.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:YCBCR:Y? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:YCBCR:Y? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:YCBCR:Y value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:YCBCR:Y <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:YCBCR:Y?
Info
  • <QString> is the identifier value. The default YCBCR packets Y value is XXXXXXXXXX.

SearchSearchItemTriggerABusDphyYcbcrCb

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:YCBCR:CB command.

Description
  • This command specifies the Cb data string used for DPHY triggering if the trigger condition is on YCbCr packet.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:YCBCR:CB? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:YCBCR:CB? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:YCBCR:CB value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:YCBCR:CB <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:YCBCR:CB?
Info
  • <QString> is the identifier value. The default YCBCR packets CB value is XXXXXXXXXX.

SearchSearchItemTriggerABusDphyYcbcrCr

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:YCBCR:CR command.

Description
  • This command specifies the Cr data string used for DPHY triggering if the trigger condition is on YCbCr packet.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:YCBCR:CR? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:YCBCR:CR? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:YCBCR:CR value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:YCBCR:CR <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:YCBCR:CR?
Info
  • <QString> is the identifier value. The default YCBCR packets CR value is XXXXXXXXXX.

SearchSearchItemTriggerABusDphyYcbcrY

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:YCBCR:Y command.

Description
  • This command specifies the Y data string used for DPHY triggering if the trigger condition is on YCbCr packet.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:YCBCR:Y? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:YCBCR:Y? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:YCBCR:Y value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:YCBCR:Y <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:YCBCR:Y?
Info
  • <QString> is the identifier value. The default YCBCR packets Y value is XXXXXXXXXX.

SearchSearchItemTriggerABusDphyYuv

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:YUV command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:YUV? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:YUV? query and raise an AssertionError if the returned value does not match value.
Properties
  • .u: The SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:YUV:U command.
  • .v: The SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:YUV:V command.
  • .y: The SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:YUV:Y command.

u property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:YUV:U command.

Description
  • This command specifies the U data string used for DPHY triggering if the trigger condition is on YUV packet.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:YUV:U? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:YUV:U? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:YUV:U value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:YUV:U <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:YUV:U?
Info
  • <QString> is the identifier value. The default YUV packets U value is XXXXXXXXXX.

v property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:YUV:V command.

Description
  • This command specifies the V data string used for DPHY triggering if the trigger condition is on YUV packet.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:YUV:V? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:YUV:V? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:YUV:V value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:YUV:V <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:YUV:V?
Info
  • <QString> is the identifier value. The default YUV packets V value is XXXXXXXXXX.

y property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:YUV:Y command.

Description
  • This command specifies the Y data string used for DPHY triggering if the trigger condition is on YUV packet.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:YUV:Y? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:YUV:Y? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:YUV:Y value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:YUV:Y <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:YUV:Y?
Info
  • <QString> is the identifier value. The default YUV packets Y value is XXXXXXXXXX.

SearchSearchItemTriggerABusDphyYuvU

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:YUV:U command.

Description
  • This command specifies the U data string used for DPHY triggering if the trigger condition is on YUV packet.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:YUV:U? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:YUV:U? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:YUV:U value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:YUV:U <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:YUV:U?
Info
  • <QString> is the identifier value. The default YUV packets U value is XXXXXXXXXX.

SearchSearchItemTriggerABusDphyYuvV

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:YUV:V command.

Description
  • This command specifies the V data string used for DPHY triggering if the trigger condition is on YUV packet.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:YUV:V? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:YUV:V? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:YUV:V value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:YUV:V <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:YUV:V?
Info
  • <QString> is the identifier value. The default YUV packets V value is XXXXXXXXXX.

SearchSearchItemTriggerABusDphyYuvY

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:YUV:Y command.

Description
  • This command specifies the Y data string used for DPHY triggering if the trigger condition is on YUV packet.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:YUV:Y? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:YUV:Y? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:YUV:Y value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:YUV:Y <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:YUV:Y?
Info
  • <QString> is the identifier value. The default YUV packets Y value is XXXXXXXXXX.

SearchSearchItemTriggerABusEspi

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI? query and raise an AssertionError if the returned value does not match value.
Properties
  • .address: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:ADDRess command tree.
  • .command: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:COMMAND command tree.
  • .condition: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:CONDition command.
  • .cycletype: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:CYCLETYPe command.
  • .data: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:DATa command tree.
  • .error: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:ERRor command tree.
  • .length: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:LENGth command tree.
  • .phase: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:PHASe command.
  • .respcycle: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:RESPCYCLE command tree.
  • .smbus: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:SMBUS command tree.
  • .tag: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:TAG command tree.
  • .virtualwire: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:VIRTUALWIRe command tree.

address property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:ADDRess command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:ADDRess? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:ADDRess? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:ADDRess:VALue command.

command property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:COMMAND command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:COMMAND? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:COMMAND? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .opcode: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:COMMAND:OPCode command.

condition property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:CONDition command.

Description
  • This command sets or queries the trigger condition for a ESPI bus. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:CONDition? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:CONDition? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:CONDition value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:CONDition {STARt|CHINDependent|PERICHANnel|OOBCHANnel|VWCHANnel|FACHANnel|DATa|STATus|ERRors|WAIT|END}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:CONDition?
Info
  • STARt specifies STARt as the event for ESPI frame to search on.
  • CHINDependent specifies CHINDependent channel for ESPI protocol to search on.
  • PERICHANnel specifies peripheral channel for ESPI protocol to search on.
  • OOBCHANnel specifies OOBCHANnel channel for ESPI protocol to search on.
  • VWCHANnel specifies virtual wire channel for ESPI protocol to search on.
  • FACHANnel specifies flash channel for ESPI protocol to search on.
  • DATa specifies DATa as the field within a ESPI frame to search on.
  • STATus specifies STATus as the field within a ESPI frame to search on.
  • ERRors specifies ERRors as the type of error ESPI frame to search on.
  • WAIT specifies WAIT as the field within a ESPI frame to search on.
  • END specifies END as the event for a ESPI frame to search on.

cycletype property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:CYCLETYPe command.

Description
  • This command sets or queries the cycle type on command in ESPI bus. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:CYCLETYPe? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:CYCLETYPe? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:CYCLETYPe value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:CYCLETYPe {MEMRD32|MEMRD64|MEMWR32|MEMWR64|MESSage|MSGWITHDATa|SUCCESSNODATa|SUCCESSDATa|UNSUCCESSNODATa|OOBSMBUS|MCTP|FLASHREAD|FLASHWRITe|FLASHERASe|FLSUCCESSNODATa|FLSUCCESSDATa|FLUNSUCCESSNODATa}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:CYCLETYPe?
Info
  • MEMRD32 specifies Memory Read 32 as the cycle type to search on.
  • MEMRD64 specifies Memory Read 64 as the cycle type to search on.
  • MEMWR32 specifies Memory Read Write 32 as the cycle type to search on.
  • MEMWR64 specifies Memory Read Write 64 as the cycle type to search on.
  • MESSage specifies MESSage as the cycle type to search on.
  • MSGWITHDATa specifies message with Data as the cycle type to search on.
  • SUCCESSNODATa specifies success without data as the cycle type to search on.
  • SUCCESSDATa specifies success with data as the cycle type to search on.
  • UNSUCCESSNODATa specifies unsuccess without data as the cycle type to search on.
  • OOBSMBUS specifies OOB SMBus as the cycle type to search on.
  • MCTP specifies MCTP as the cycle type to search on.
  • FLASHREAD specifies FLASHREAD as the cycle type to search on.
  • FLASHWRITe specifies FLASHWRITe as the cycle type to search on.
  • FLASHERASe specifies FLASHERASe as the cycle type to search on.
  • FLSUCCESSNODATa specifies flash success without data as the cycle type to search on.
  • FLSUCCESSDATa specifies flash Success with data as the cycle type to search on.
  • FLUNSUCCESSNODATa specifies flash unsuccess without data as the cycle type to search on.

data property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:DATa command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:DATa? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:DATa? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .size: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:DATa:SIZe command.
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:DATa:VALue command.

error property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:ERRor command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:ERRor? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:ERRor? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .type: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:ERRor:TYPe command.

length property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:LENGth command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:LENGth? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:LENGth? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:LENGth:VALue command.

phase property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:PHASe command.

Description
  • This command sets or queries the phase in ESPI bus. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:PHASe? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:PHASe? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:PHASe value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:PHASe {COMMand|RESPONSE|RESPONSEHEADer|RESPONSENOHEADer}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:PHASe?
Info
  • COMMand specifies command as the field/packet to search on.
  • RESPONSE specifies response as the field/packet to search on.
  • RESPONSEHEADer specifies the response header as the field/packet to search on.
  • RESPONSENOHEADer specifies the response without header as the field/packet to search on.

respcycle property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:RESPCYCLE command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:RESPCYCLE? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:RESPCYCLE? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .type: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:RESPCYCLE:TYPe command.

smbus property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:SMBUS command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:SMBUS? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:SMBUS? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .destination: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:SMBUS:DESTination command tree.
  • .slave: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:SMBUS:SLAVe command tree.

tag property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:TAG command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:TAG? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:TAG? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:TAG:VALue command.

virtualwire property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:VIRTUALWIRe command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:VIRTUALWIRe? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:VIRTUALWIRe? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .count: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:VIRTUALWIRe:COUNt command tree.
  • .data: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:VIRTUALWIRe:DATa command tree.
  • .index: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:VIRTUALWIRe:INDex command tree.
  • .response: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:VIRTUALWIRe:RESPonse command tree.
  • .status: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:VIRTUALWIRe:STATus command tree.

SearchSearchItemTriggerABusEspiAddress

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:ADDRess command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:ADDRess? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:ADDRess? query and raise an AssertionError if the returned value does not match value.
Properties
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:ADDRess:VALue command.

value property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:ADDRess:VALue command.

Description
  • This command specifies the binary data string used for ESPI triggering if the trigger condition is Address. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:ADDRess:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:ADDRess:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:ADDRess:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:ADDRess:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:ADDRess:VALue?
Info
  • <QString> is the identifier value. The default value is XXXXXXXX.

SearchSearchItemTriggerABusEspiAddressValue

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:ADDRess:VALue command.

Description
  • This command specifies the binary data string used for ESPI triggering if the trigger condition is Address. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:ADDRess:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:ADDRess:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:ADDRess:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:ADDRess:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:ADDRess:VALue?
Info
  • <QString> is the identifier value. The default value is XXXXXXXX.

SearchSearchItemTriggerABusEspiCommand

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:COMMAND command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:COMMAND? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:COMMAND? query and raise an AssertionError if the returned value does not match value.
Properties
  • .opcode: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:COMMAND:OPCode command.

opcode property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:COMMAND:OPCode command.

Description
  • This command sets or queries the command opcode in ESPI bus. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:COMMAND:OPCode? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:COMMAND:OPCode? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:COMMAND:OPCode value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:COMMAND:OPCode {GETSTATus|GETCONFig|SETCONFig|GETNP|GETPC|PUTNP|PUTPC|PUTIORDSHORt|PUTIOWRSHORt|PUTMEMRD32SHORt|PUTMEMWR32SHORt|PUTOOB|GETOOB|PUTFLASHC|GETFLASHNP|PUTVWIRe|GETVWIRe}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:COMMAND:OPCode?
Info
  • GETSTATus specifies get status as the command opcode in ESPI bus to search on.
  • GETCONFig specifies get configuration as the command opcode in ESPI bus to search on.
  • SETCONFig specifies set configuration as the command opcode in ESPI bus to search on.
  • GETNP specifies GETNP as the command opcode in ESPI bus to search on.
  • GETPC specifies GETPC as the command opcode in ESPI bus to search on.
  • PUTNP specifies PUTNP as the command opcode in ESPI bus to search on.
  • PUTPC specifies PUTPC as the command opcode in ESPI bus to search on.
  • PUTIORDSHORt specifies put IO read short as the command opcode in ESPI bus to search on.
  • PUTIOWRSHORt specifies put IO write short as the command opcode in ESPI bus to search on.
  • PUTMEMRD32SHORt specifies put memory read 32 short as the command opcode in ESPI bus to search on.
  • PUTMEMWR32SHORt specifies put memory write 32 short as the command opcode in ESPI bus to search on.
  • PUTOOB specifies PUTOOB as the command opcode in ESPI bus to search on.
  • GETOOB specifies GETOOB as the command opcode in ESPI bus to search on.
  • PUTFLASHC specifies PUTFLASHC as the command opcode in ESPI bus to search on.
  • GETFLASHNP specifies GETFLASHNP as the command opcode in ESPI bus to search on.
  • PUTVWIRe specifies put virtual wire as the command opcode in ESPI bus to search on.
  • GETVWIRe specifies get virtual wire as the command opcode in ESPI bus to search on.

SearchSearchItemTriggerABusEspiCommandOpcode

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:COMMAND:OPCode command.

Description
  • This command sets or queries the command opcode in ESPI bus. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:COMMAND:OPCode? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:COMMAND:OPCode? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:COMMAND:OPCode value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:COMMAND:OPCode {GETSTATus|GETCONFig|SETCONFig|GETNP|GETPC|PUTNP|PUTPC|PUTIORDSHORt|PUTIOWRSHORt|PUTMEMRD32SHORt|PUTMEMWR32SHORt|PUTOOB|GETOOB|PUTFLASHC|GETFLASHNP|PUTVWIRe|GETVWIRe}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:COMMAND:OPCode?
Info
  • GETSTATus specifies get status as the command opcode in ESPI bus to search on.
  • GETCONFig specifies get configuration as the command opcode in ESPI bus to search on.
  • SETCONFig specifies set configuration as the command opcode in ESPI bus to search on.
  • GETNP specifies GETNP as the command opcode in ESPI bus to search on.
  • GETPC specifies GETPC as the command opcode in ESPI bus to search on.
  • PUTNP specifies PUTNP as the command opcode in ESPI bus to search on.
  • PUTPC specifies PUTPC as the command opcode in ESPI bus to search on.
  • PUTIORDSHORt specifies put IO read short as the command opcode in ESPI bus to search on.
  • PUTIOWRSHORt specifies put IO write short as the command opcode in ESPI bus to search on.
  • PUTMEMRD32SHORt specifies put memory read 32 short as the command opcode in ESPI bus to search on.
  • PUTMEMWR32SHORt specifies put memory write 32 short as the command opcode in ESPI bus to search on.
  • PUTOOB specifies PUTOOB as the command opcode in ESPI bus to search on.
  • GETOOB specifies GETOOB as the command opcode in ESPI bus to search on.
  • PUTFLASHC specifies PUTFLASHC as the command opcode in ESPI bus to search on.
  • GETFLASHNP specifies GETFLASHNP as the command opcode in ESPI bus to search on.
  • PUTVWIRe specifies put virtual wire as the command opcode in ESPI bus to search on.
  • GETVWIRe specifies get virtual wire as the command opcode in ESPI bus to search on.

SearchSearchItemTriggerABusEspiCondition

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:CONDition command.

Description
  • This command sets or queries the trigger condition for a ESPI bus. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:CONDition? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:CONDition? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:CONDition value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:CONDition {STARt|CHINDependent|PERICHANnel|OOBCHANnel|VWCHANnel|FACHANnel|DATa|STATus|ERRors|WAIT|END}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:CONDition?
Info
  • STARt specifies STARt as the event for ESPI frame to search on.
  • CHINDependent specifies CHINDependent channel for ESPI protocol to search on.
  • PERICHANnel specifies peripheral channel for ESPI protocol to search on.
  • OOBCHANnel specifies OOBCHANnel channel for ESPI protocol to search on.
  • VWCHANnel specifies virtual wire channel for ESPI protocol to search on.
  • FACHANnel specifies flash channel for ESPI protocol to search on.
  • DATa specifies DATa as the field within a ESPI frame to search on.
  • STATus specifies STATus as the field within a ESPI frame to search on.
  • ERRors specifies ERRors as the type of error ESPI frame to search on.
  • WAIT specifies WAIT as the field within a ESPI frame to search on.
  • END specifies END as the event for a ESPI frame to search on.

SearchSearchItemTriggerABusEspiCycletype

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:CYCLETYPe command.

Description
  • This command sets or queries the cycle type on command in ESPI bus. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:CYCLETYPe? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:CYCLETYPe? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:CYCLETYPe value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:CYCLETYPe {MEMRD32|MEMRD64|MEMWR32|MEMWR64|MESSage|MSGWITHDATa|SUCCESSNODATa|SUCCESSDATa|UNSUCCESSNODATa|OOBSMBUS|MCTP|FLASHREAD|FLASHWRITe|FLASHERASe|FLSUCCESSNODATa|FLSUCCESSDATa|FLUNSUCCESSNODATa}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:CYCLETYPe?
Info
  • MEMRD32 specifies Memory Read 32 as the cycle type to search on.
  • MEMRD64 specifies Memory Read 64 as the cycle type to search on.
  • MEMWR32 specifies Memory Read Write 32 as the cycle type to search on.
  • MEMWR64 specifies Memory Read Write 64 as the cycle type to search on.
  • MESSage specifies MESSage as the cycle type to search on.
  • MSGWITHDATa specifies message with Data as the cycle type to search on.
  • SUCCESSNODATa specifies success without data as the cycle type to search on.
  • SUCCESSDATa specifies success with data as the cycle type to search on.
  • UNSUCCESSNODATa specifies unsuccess without data as the cycle type to search on.
  • OOBSMBUS specifies OOB SMBus as the cycle type to search on.
  • MCTP specifies MCTP as the cycle type to search on.
  • FLASHREAD specifies FLASHREAD as the cycle type to search on.
  • FLASHWRITe specifies FLASHWRITe as the cycle type to search on.
  • FLASHERASe specifies FLASHERASe as the cycle type to search on.
  • FLSUCCESSNODATa specifies flash success without data as the cycle type to search on.
  • FLSUCCESSDATa specifies flash Success with data as the cycle type to search on.
  • FLUNSUCCESSNODATa specifies flash unsuccess without data as the cycle type to search on.

SearchSearchItemTriggerABusEspiData

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:DATa command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:DATa? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:DATa? query and raise an AssertionError if the returned value does not match value.
Properties
  • .size: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:DATa:SIZe command.
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:DATa:VALue command.

size property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:DATa:SIZe command.

Description
  • This command specifies the length of the data string in bytes to be used for ESPI triggering if the trigger condition is DATA. The default data size is 1 byte and ranges between 1 and 5. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:DATa:SIZe? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:DATa:SIZe? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:DATa:SIZe value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:DATa:SIZe <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:DATa:SIZe?
Info
  • <NR1> specifies the data size. The default data size is 1 and the valid range is 1 to 5.

value property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:DATa:VALue command.

Description
  • This command specifies the binary data string used for ESPI triggering if the trigger condition is DATA. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:DATa:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:DATa:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:DATa:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:DATa:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:DATa:VALue?
Info
  • <QString> is the identifier value. The default value is XXXXXXXX.

SearchSearchItemTriggerABusEspiDataSize

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:DATa:SIZe command.

Description
  • This command specifies the length of the data string in bytes to be used for ESPI triggering if the trigger condition is DATA. The default data size is 1 byte and ranges between 1 and 5. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:DATa:SIZe? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:DATa:SIZe? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:DATa:SIZe value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:DATa:SIZe <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:DATa:SIZe?
Info
  • <NR1> specifies the data size. The default data size is 1 and the valid range is 1 to 5.

SearchSearchItemTriggerABusEspiDataValue

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:DATa:VALue command.

Description
  • This command specifies the binary data string used for ESPI triggering if the trigger condition is DATA. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:DATa:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:DATa:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:DATa:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:DATa:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:DATa:VALue?
Info
  • <QString> is the identifier value. The default value is XXXXXXXX.

SearchSearchItemTriggerABusEspiError

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:ERRor command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:ERRor? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:ERRor? query and raise an AssertionError if the returned value does not match value.
Properties
  • .type: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:ERRor:TYPe command.

type property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:ERRor:TYPe command.

Description
  • This command sets or queries the error type on command or response in ESPI bus. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:ERRor:TYPe? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:ERRor:TYPe? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:ERRor:TYPe value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:ERRor:TYPe {CRC|DEFer|FATal|NONFATal|NORESPonse|CMDOPCODe|CYCLETYPe}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:ERRor:TYPe?
Info
  • CRC specifies CRC as the error type to search on.
  • DEFer specifies DEFer as the error type to search on.
  • FATal specifies FATal as the error type to search on.
  • NONFATal specifies NONFATal as the error type to search on.
  • NORESPonse specifies NORESPonse as the error type to search on.
  • CMDOPCODe specifies CMDOPCODe as the error type to search on.
  • CYCLETYPe specifies CYCLETYPe as the error type to search on.

SearchSearchItemTriggerABusEspiErrorType

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:ERRor:TYPe command.

Description
  • This command sets or queries the error type on command or response in ESPI bus. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:ERRor:TYPe? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:ERRor:TYPe? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:ERRor:TYPe value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:ERRor:TYPe {CRC|DEFer|FATal|NONFATal|NORESPonse|CMDOPCODe|CYCLETYPe}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:ERRor:TYPe?
Info
  • CRC specifies CRC as the error type to search on.
  • DEFer specifies DEFer as the error type to search on.
  • FATal specifies FATal as the error type to search on.
  • NONFATal specifies NONFATal as the error type to search on.
  • NORESPonse specifies NORESPonse as the error type to search on.
  • CMDOPCODe specifies CMDOPCODe as the error type to search on.
  • CYCLETYPe specifies CYCLETYPe as the error type to search on.

SearchSearchItemTriggerABusEspiLength

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:LENGth command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:LENGth? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:LENGth? query and raise an AssertionError if the returned value does not match value.
Properties
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:LENGth:VALue command.

value property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:LENGth:VALue command.

Description
  • This command specifies the binary data string used for ESPI triggering if the trigger condition is Length. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:LENGth:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:LENGth:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:LENGth:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:LENGth:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:LENGth:VALue?
Info
  • <QString> is the identifier value. The default value is XXXXXXXXXXXX.

SearchSearchItemTriggerABusEspiLengthValue

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:LENGth:VALue command.

Description
  • This command specifies the binary data string used for ESPI triggering if the trigger condition is Length. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:LENGth:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:LENGth:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:LENGth:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:LENGth:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:LENGth:VALue?
Info
  • <QString> is the identifier value. The default value is XXXXXXXXXXXX.

SearchSearchItemTriggerABusEspiPhase

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:PHASe command.

Description
  • This command sets or queries the phase in ESPI bus. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:PHASe? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:PHASe? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:PHASe value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:PHASe {COMMand|RESPONSE|RESPONSEHEADer|RESPONSENOHEADer}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:PHASe?
Info
  • COMMand specifies command as the field/packet to search on.
  • RESPONSE specifies response as the field/packet to search on.
  • RESPONSEHEADer specifies the response header as the field/packet to search on.
  • RESPONSENOHEADer specifies the response without header as the field/packet to search on.

SearchSearchItemTriggerABusEspiRespcycle

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:RESPCYCLE command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:RESPCYCLE? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:RESPCYCLE? query and raise an AssertionError if the returned value does not match value.
Properties
  • .type: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:RESPCYCLE:TYPe command.

type property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:RESPCYCLE:TYPe command.

Description
  • This command sets or queries the response cycle type on command in ESPI bus. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:RESPCYCLE:TYPe? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:RESPCYCLE:TYPe? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:RESPCYCLE:TYPe value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:RESPCYCLE:TYPe {MEMRDWR32|MEMRDWR64|MESSage|MSGWITHDATa|SUCCESSNODATa|SUCCESSDATa|UNSUCCESSNODATa|LTR|FLASHREAD|FLASHWRITe|FLASHERASe}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:RESPCYCLE:TYPe?
Info
  • MEMRDWR32 specifies Memory Read/Write 32 as the cycle type to search on.
  • MEMRDWR64 specifies Memory Read/Write 64 as the cycle type to search on.
  • MESSage specifies message as the cycle type to search on.
  • MSGWITHDATa specifies message with Data as the cycle type to search on.
  • SUCCESSNODATa specifies success without data as the cycle type to search on.
  • SUCCESSDATa specifies success with data as the cycle type to search on.
  • UNSUCCESSNODATa specifies unsuccess without data as the cycle type to search on.
  • LTR specifies LTR as the cycle type to search on.
  • FLASHREAD specifies flash read as the cycle type to search on.
  • FLASHWRITe specifies flash write as the cycle type to search on.
  • FLASHERASe specifies flash erase as the cycle type to search on.

SearchSearchItemTriggerABusEspiRespcycleType

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:RESPCYCLE:TYPe command.

Description
  • This command sets or queries the response cycle type on command in ESPI bus. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:RESPCYCLE:TYPe? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:RESPCYCLE:TYPe? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:RESPCYCLE:TYPe value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:RESPCYCLE:TYPe {MEMRDWR32|MEMRDWR64|MESSage|MSGWITHDATa|SUCCESSNODATa|SUCCESSDATa|UNSUCCESSNODATa|LTR|FLASHREAD|FLASHWRITe|FLASHERASe}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:RESPCYCLE:TYPe?
Info
  • MEMRDWR32 specifies Memory Read/Write 32 as the cycle type to search on.
  • MEMRDWR64 specifies Memory Read/Write 64 as the cycle type to search on.
  • MESSage specifies message as the cycle type to search on.
  • MSGWITHDATa specifies message with Data as the cycle type to search on.
  • SUCCESSNODATa specifies success without data as the cycle type to search on.
  • SUCCESSDATa specifies success with data as the cycle type to search on.
  • UNSUCCESSNODATa specifies unsuccess without data as the cycle type to search on.
  • LTR specifies LTR as the cycle type to search on.
  • FLASHREAD specifies flash read as the cycle type to search on.
  • FLASHWRITe specifies flash write as the cycle type to search on.
  • FLASHERASe specifies flash erase as the cycle type to search on.

SearchSearchItemTriggerABusEspiSmbus

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:SMBUS command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:SMBUS? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:SMBUS? query and raise an AssertionError if the returned value does not match value.
Properties
  • .destination: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:SMBUS:DESTination command tree.
  • .slave: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:SMBUS:SLAVe command tree.

destination property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:SMBUS:DESTination command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:SMBUS:DESTination? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:SMBUS:DESTination? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .address: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:SMBUS:DESTination:ADDRess command.

slave property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:SMBUS:SLAVe command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:SMBUS:SLAVe? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:SMBUS:SLAVe? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .address: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:SMBUS:SLAVe:ADDRess command.

SearchSearchItemTriggerABusEspiSmbusDestination

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:SMBUS:DESTination command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:SMBUS:DESTination? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:SMBUS:DESTination? query and raise an AssertionError if the returned value does not match value.
Properties
  • .address: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:SMBUS:DESTination:ADDRess command.

address property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:SMBUS:DESTination:ADDRess command.

Description
  • This command specifies the binary data string used for ESPI triggering if the trigger condition is SMBus Source/Destination Address. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:SMBUS:DESTination:ADDRess? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:SMBUS:DESTination:ADDRess? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:SMBUS:DESTination:ADDRess value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:SMBUS:DESTination:ADDRess <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:SMBUS:DESTination:ADDRess?
Info
  • <QString> is the identifier value. The default value is XXXXXXXX.

SearchSearchItemTriggerABusEspiSmbusDestinationAddress

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:SMBUS:DESTination:ADDRess command.

Description
  • This command specifies the binary data string used for ESPI triggering if the trigger condition is SMBus Source/Destination Address. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:SMBUS:DESTination:ADDRess? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:SMBUS:DESTination:ADDRess? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:SMBUS:DESTination:ADDRess value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:SMBUS:DESTination:ADDRess <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:SMBUS:DESTination:ADDRess?
Info
  • <QString> is the identifier value. The default value is XXXXXXXX.

SearchSearchItemTriggerABusEspiSmbusSlave

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:SMBUS:SLAVe command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:SMBUS:SLAVe? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:SMBUS:SLAVe? query and raise an AssertionError if the returned value does not match value.
Properties
  • .address: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:SMBUS:SLAVe:ADDRess command.

address property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:SMBUS:SLAVe:ADDRess command.

Description
  • This command specifies the binary data string used for ESPI triggering if the trigger condition is SMBus Slave Address. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:SMBUS:SLAVe:ADDRess? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:SMBUS:SLAVe:ADDRess? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:SMBUS:SLAVe:ADDRess value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:SMBUS:SLAVe:ADDRess <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:SMBUS:SLAVe:ADDRess?
Info
  • <QString> is the identifier value. The default value is XXXXXXXX.

SearchSearchItemTriggerABusEspiSmbusSlaveAddress

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:SMBUS:SLAVe:ADDRess command.

Description
  • This command specifies the binary data string used for ESPI triggering if the trigger condition is SMBus Slave Address. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:SMBUS:SLAVe:ADDRess? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:SMBUS:SLAVe:ADDRess? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:SMBUS:SLAVe:ADDRess value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:SMBUS:SLAVe:ADDRess <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:SMBUS:SLAVe:ADDRess?
Info
  • <QString> is the identifier value. The default value is XXXXXXXX.

SearchSearchItemTriggerABusEspiTag

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:TAG command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:TAG? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:TAG? query and raise an AssertionError if the returned value does not match value.
Properties
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:TAG:VALue command.

value property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:TAG:VALue command.

Description
  • This command specifies the binary data string used for ESPI triggering if the trigger condition is Tag. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:TAG:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:TAG:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:TAG:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:TAG:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:TAG:VALue?
Info
  • <QString> is the identifier value. The default value is XXXX.

SearchSearchItemTriggerABusEspiTagValue

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:TAG:VALue command.

Description
  • This command specifies the binary data string used for ESPI triggering if the trigger condition is Tag. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:TAG:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:TAG:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:TAG:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:TAG:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:TAG:VALue?
Info
  • <QString> is the identifier value. The default value is XXXX.

SearchSearchItemTriggerABusEspiVirtualwire

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:VIRTUALWIRe command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:VIRTUALWIRe? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:VIRTUALWIRe? query and raise an AssertionError if the returned value does not match value.
Properties
  • .count: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:VIRTUALWIRe:COUNt command tree.
  • .data: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:VIRTUALWIRe:DATa command tree.
  • .index: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:VIRTUALWIRe:INDex command tree.
  • .response: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:VIRTUALWIRe:RESPonse command tree.
  • .status: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:VIRTUALWIRe:STATus command tree.

count property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:VIRTUALWIRe:COUNt command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:VIRTUALWIRe:COUNt? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:VIRTUALWIRe:COUNt? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:VIRTUALWIRe:COUNt:VALue command.

data property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:VIRTUALWIRe:DATa command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:VIRTUALWIRe:DATa? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:VIRTUALWIRe:DATa? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:VIRTUALWIRe:DATa:VALue command.

index property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:VIRTUALWIRe:INDex command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:VIRTUALWIRe:INDex? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:VIRTUALWIRe:INDex? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:VIRTUALWIRe:INDex:VALue command.

response property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:VIRTUALWIRe:RESPonse command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:VIRTUALWIRe:RESPonse? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:VIRTUALWIRe:RESPonse? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:VIRTUALWIRe:RESPonse:VALue command.

status property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:VIRTUALWIRe:STATus command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:VIRTUALWIRe:STATus? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:VIRTUALWIRe:STATus? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:VIRTUALWIRe:STATus:VALue command.

SearchSearchItemTriggerABusEspiVirtualwireCount

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:VIRTUALWIRe:COUNt command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:VIRTUALWIRe:COUNt? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:VIRTUALWIRe:COUNt? query and raise an AssertionError if the returned value does not match value.
Properties
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:VIRTUALWIRe:COUNt:VALue command.

value property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:VIRTUALWIRe:COUNt:VALue command.

Description
  • This command specifies the binary data string used for ESPI triggering if the trigger condition is Virtual wire count. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:VIRTUALWIRe:COUNt:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:VIRTUALWIRe:COUNt:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:VIRTUALWIRe:COUNt:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:VIRTUALWIRe:COUNt:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:VIRTUALWIRe:COUNt:VALue?
Info
  • <QString> is the identifier value. The default value is XXXXXXXX.

SearchSearchItemTriggerABusEspiVirtualwireCountValue

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:VIRTUALWIRe:COUNt:VALue command.

Description
  • This command specifies the binary data string used for ESPI triggering if the trigger condition is Virtual wire count. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:VIRTUALWIRe:COUNt:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:VIRTUALWIRe:COUNt:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:VIRTUALWIRe:COUNt:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:VIRTUALWIRe:COUNt:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:VIRTUALWIRe:COUNt:VALue?
Info
  • <QString> is the identifier value. The default value is XXXXXXXX.

SearchSearchItemTriggerABusEspiVirtualwireData

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:VIRTUALWIRe:DATa command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:VIRTUALWIRe:DATa? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:VIRTUALWIRe:DATa? query and raise an AssertionError if the returned value does not match value.
Properties
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:VIRTUALWIRe:DATa:VALue command.

value property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:VIRTUALWIRe:DATa:VALue command.

Description
  • This command specifies the binary data string used for ESPI triggering if the trigger condition is Virtual wire Data. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:VIRTUALWIRe:DATa:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:VIRTUALWIRe:DATa:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:VIRTUALWIRe:DATa:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:VIRTUALWIRe:DATa:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:VIRTUALWIRe:DATa:VALue?
Info
  • <QString> is the identifier value. The default value is XXXXXXXX.

SearchSearchItemTriggerABusEspiVirtualwireDataValue

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:VIRTUALWIRe:DATa:VALue command.

Description
  • This command specifies the binary data string used for ESPI triggering if the trigger condition is Virtual wire Data. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:VIRTUALWIRe:DATa:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:VIRTUALWIRe:DATa:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:VIRTUALWIRe:DATa:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:VIRTUALWIRe:DATa:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:VIRTUALWIRe:DATa:VALue?
Info
  • <QString> is the identifier value. The default value is XXXXXXXX.

SearchSearchItemTriggerABusEspiVirtualwireIndex

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:VIRTUALWIRe:INDex command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:VIRTUALWIRe:INDex? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:VIRTUALWIRe:INDex? query and raise an AssertionError if the returned value does not match value.
Properties
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:VIRTUALWIRe:INDex:VALue command.

value property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:VIRTUALWIRe:INDex:VALue command.

Description
  • This command specifies the binary data string used for ESPI triggering if the trigger condition is Virtual wire Index. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:VIRTUALWIRe:INDex:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:VIRTUALWIRe:INDex:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:VIRTUALWIRe:INDex:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:VIRTUALWIRe:INDex:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:VIRTUALWIRe:INDex:VALue?
Info
  • <QString> is the identifier value. The default value is XXXXXXXX.

SearchSearchItemTriggerABusEspiVirtualwireIndexValue

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:VIRTUALWIRe:INDex:VALue command.

Description
  • This command specifies the binary data string used for ESPI triggering if the trigger condition is Virtual wire Index. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:VIRTUALWIRe:INDex:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:VIRTUALWIRe:INDex:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:VIRTUALWIRe:INDex:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:VIRTUALWIRe:INDex:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:VIRTUALWIRe:INDex:VALue?
Info
  • <QString> is the identifier value. The default value is XXXXXXXX.

SearchSearchItemTriggerABusEspiVirtualwireResponse

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:VIRTUALWIRe:RESPonse command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:VIRTUALWIRe:RESPonse? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:VIRTUALWIRe:RESPonse? query and raise an AssertionError if the returned value does not match value.
Properties
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:VIRTUALWIRe:RESPonse:VALue command.

value property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:VIRTUALWIRe:RESPonse:VALue command.

Description
  • This command specifies the binary data string used for ESPI triggering if the trigger condition is Virtual wire Response. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:VIRTUALWIRe:RESPonse:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:VIRTUALWIRe:RESPonse:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:VIRTUALWIRe:RESPonse:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:VIRTUALWIRe:RESPonse:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:VIRTUALWIRe:RESPonse:VALue?
Info
  • <QString> is the identifier value. The default value is XXXXXXXX.

SearchSearchItemTriggerABusEspiVirtualwireResponseValue

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:VIRTUALWIRe:RESPonse:VALue command.

Description
  • This command specifies the binary data string used for ESPI triggering if the trigger condition is Virtual wire Response. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:VIRTUALWIRe:RESPonse:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:VIRTUALWIRe:RESPonse:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:VIRTUALWIRe:RESPonse:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:VIRTUALWIRe:RESPonse:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:VIRTUALWIRe:RESPonse:VALue?
Info
  • <QString> is the identifier value. The default value is XXXXXXXX.

SearchSearchItemTriggerABusEspiVirtualwireStatus

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:VIRTUALWIRe:STATus command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:VIRTUALWIRe:STATus? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:VIRTUALWIRe:STATus? query and raise an AssertionError if the returned value does not match value.
Properties
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:VIRTUALWIRe:STATus:VALue command.

value property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:VIRTUALWIRe:STATus:VALue command.

Description
  • This command specifies the binary data string used for ESPI triggering if the trigger condition is Virtual wire Status. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:VIRTUALWIRe:STATus:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:VIRTUALWIRe:STATus:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:VIRTUALWIRe:STATus:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:VIRTUALWIRe:STATus:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:VIRTUALWIRe:STATus:VALue?
Info
  • <QString> is the identifier value. The default value is XXXXXXXXXXXXXXXX.

SearchSearchItemTriggerABusEspiVirtualwireStatusValue

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:VIRTUALWIRe:STATus:VALue command.

Description
  • This command specifies the binary data string used for ESPI triggering if the trigger condition is Virtual wire Status. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:VIRTUALWIRe:STATus:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:VIRTUALWIRe:STATus:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:VIRTUALWIRe:STATus:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:VIRTUALWIRe:STATus:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:VIRTUALWIRe:STATus:VALue?
Info
  • <QString> is the identifier value. The default value is XXXXXXXXXXXXXXXX.

SearchSearchItemTriggerABusEthercat

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT? query and raise an AssertionError if the returned value does not match value.
Properties
  • .addressmode: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:ADDRESSMODe command.
  • .cntnv: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:CNTNV command tree.
  • .commandtype: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:COMMANDTYPe command.
  • .condition: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:CONDition command.
  • .cyc: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:CYC command tree.
  • .datagram: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:DATAGRAM command.
  • .datagramheader: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:DATAGRAMHEADer command.
  • .data: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:DATa command tree.
  • .destinationaddress: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:DESTINATIONADDRess command tree.
  • .deviceaddress: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:DEVICEADDRess command.
  • .error: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:ERRor command tree.
  • .frametype: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:FRAMETYPe command.
  • .hash: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:HASH command tree.
  • .header: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:HEADer command tree.
  • .identification: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:IDENtification command tree.
  • .idx: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:IDX command tree.
  • .index: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:INDex command tree.
  • .ipdestination: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:IPDESTination command tree.
  • .ipsource: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:IPSOURce command tree.
  • .irq: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:IRQ command tree.
  • .len: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:LEN command tree.
  • .logicaladdress: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:LOGICALADDRess command tree.
  • .mailboxtype: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:MAILBOXTYPe command.
  • .mailbox: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:MAILbox command.
  • .networkvariable: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:NETWORKVARiable command tree.
  • .network: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:NETWork command tree.
  • .offset: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:OFFSet command tree.
  • .position: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:POSition command tree.
  • .protocoltype: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:PROTOCOLTYPe command.
  • .pubid: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:PUBID command tree.
  • .quality: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:QUALity command tree.
  • .service: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:SERVice command tree.
  • .sourceaddress: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:SOURCEADDRess command tree.
  • .src: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:SRC command tree.
  • .tci: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:TCI command tree.
  • .wkc: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:WKC command tree.

addressmode property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:ADDRESSMODe command.

Description
  • This command sets or queries the Address Mode in EtherCAT bus. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:ADDRESSMODe? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:ADDRESSMODe? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:ADDRESSMODe value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:ADDRESSMODe {DEVice|LOGical}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:ADDRESSMODe?
Info
  • DEVice sets the Address Mode to Device. This is the default value.
  • LOGical sets the Address Mode to Logical.

cntnv property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:CNTNV command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:CNTNV? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:CNTNV? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:CNTNV:VALue command.

commandtype property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:COMMANDTYPe command.

Description
  • This command sets or queries the Command Type in EtherCAT bus. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:COMMANDTYPe? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:COMMANDTYPe? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:COMMANDTYPe value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:COMMANDTYPe {NOP|APRD|APWR|APRW|FPRD|FPWR|FPRW|BRD|BWR|BRW|LRD|LWR|LRW|ARMW|FRMW|REServed}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:COMMANDTYPe?
Info
  • NOP specifies the Command Type and sets it to NOP. This is the default value.
  • APRD specifies the Command Type and sets it to APRD.
  • APWR specifies the Command Type and sets it to APWR.
  • APRW specifies the Command Type and sets it to APRW.
  • FPRD specifies the Command Type and sets it to FPRD.
  • FPWR specifies the Command Type and sets it to FPWR.
  • FPRW specifies the Command Type and sets it to FPRW.
  • BRD specifies the Command Type and sets it to BRD.
  • BWR specifies the Command Type and sets it to BWR.
  • BRW specifies the Command Type and sets it to BRW.
  • LRD specifies the Command Type and sets it to LRD.
  • LWR specifies the Command Type and sets it to LWR.
  • LRW specifies the Command Type and sets it to LRW.
  • ARMW specifies the Command Type and sets it to ARMW.
  • FRMW specifies the Command Type and sets it to FRMW.
  • REServed specifies the Command Type and sets it to REServed.

condition property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:CONDition command.

Description
  • This command sets or queries the trigger condition for a EtherCAT bus. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:CONDition? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:CONDition? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:CONDition value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:CONDition {SOF|PROTocol|IPHEADer|UDPIPHEADer|MACADDRess|TCI|ECATHEADERLENGth|DATagram|NETWORKVARiable|MAILBOX|FCSERRor|EOF}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:CONDition?
Info
  • SOF specifies the field within a EtherCAT frame to search on as SOF. This is the default value.
  • PROTocol specifies the field within a EtherCAT frame to search on as PROTocol.
  • IPHEADer specifies the field within a EtherCAT frame to search on as IPHEADer.
  • UDPIPHEADer specifies the field within a EtherCAT frame to search on as UDPIPHEADer.
  • MACADDRess specifies the field within a EtherCAT frame to search on as MACADDRess.
  • TCI specifies the field within a EtherCAT frame to search on as TCI.
  • ECATHEADERLENGth specifies the field within a EtherCAT frame to search on as ECATHEADERLENGth.
  • DATagram specifies the field within a EtherCAT frame to search on as DATagram.
  • NETWORKVARiable specifies the field within a EtherCAT frame to search on as NETWORKVARiable.
  • MAILBOX specifies the field within a EtherCAT frame to search on as MAILBOX.
  • FCSERRor specifies the field within a EtherCAT frame to search on as FCSERRor.
  • EOF specifies the field within a EtherCAT frame to search on as EOF.

cyc property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:CYC command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:CYC? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:CYC? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:CYC:VALue command.

data property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:DATa command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:DATa? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:DATa? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .size: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:DATa:SIZe command.
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:DATa:VALue command.

datagram property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:DATAGRAM command.

Description
  • This command sets or queries the Datagram fields in EtherCAT bus. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:DATAGRAM? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:DATAGRAM? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:DATAGRAM value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:DATAGRAM {HEADer|DATa|WKC}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:DATAGRAM?
Info
  • HEADer specifies the Datagram field and sets it to Header. This is the default value.
  • DATa specifies the Datagram field and sets it to Data.
  • WKC specifies the Datagram field and sets it to WKC.

datagramheader property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:DATAGRAMHEADer command.

Description
  • This command sets or queries the Datagram Header fields in EtherCAT bus. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:DATAGRAMHEADer? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:DATAGRAMHEADer? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:DATAGRAMHEADer value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:DATAGRAMHEADer {CMD|IDX|ADDRess|LEN|CIRCulating|IRQ}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:DATAGRAMHEADer?
Info
  • CMD specifies the Datagram Header field as CMD. This is the default value.
  • IDX specifies the Datagram Header field as IDX.
  • ADDRess specifies the Datagram Header field as ADDRess.
  • LEN specifies the Datagram Header field as LEN.
  • CIRCulating specifies the Datagram Header field as CIRCulating.
  • IRQ specifies the Datagram Header field as IRQ.
Sub-properties
  • .length: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:DATAGRAMHEADer:LENGth command.

destinationaddress property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:DESTINATIONADDRess command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:DESTINATIONADDRess? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:DESTINATIONADDRess? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:DESTINATIONADDRess:VALue command.

deviceaddress property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:DEVICEADDRess command.

Description
  • This command sets or queries the Device Address in EtherCAT bus. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:DEVICEADDRess? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:DEVICEADDRess? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:DEVICEADDRess value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:DEVICEADDRess {POSition|OFFSet}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:DEVICEADDRess?
Info
  • POSition specifies the Device Address to position. This is the default value.
  • OFFSet specifies the Device Address to offset.

error property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:ERRor command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:ERRor? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:ERRor? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .reply: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:ERRor:REPLy command tree.

frametype property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:FRAMETYPe command.

Description
  • This command sets or queries the Frame Type in EtherCAT bus. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:FRAMETYPe? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:FRAMETYPe? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:FRAMETYPe value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:FRAMETYPe {BASic|UDPIP}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:FRAMETYPe?
Info
  • BASic specifies the Frame Type as BASic. This is the default value.
  • UDPIP specifies the Frame Type as UDPIP.

hash property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:HASH command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:HASH? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:HASH? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:HASH:VALue command.

header property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:HEADer command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:HEADer? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:HEADer? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .length: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:HEADer:LENGth command.

identification property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:IDENtification command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:IDENtification? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:IDENtification? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:IDENtification:VALue command.

idx property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:IDX command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:IDX? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:IDX? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:IDX:VALue command.

index property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:INDex command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:INDex? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:INDex? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:INDex:VALue command.

ipdestination property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:IPDESTination command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:IPDESTination? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:IPDESTination? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .address: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:IPDESTination:ADDRess command tree.

ipsource property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:IPSOURce command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:IPSOURce? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:IPSOURce? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .address: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:IPSOURce:ADDRess command tree.

irq property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:IRQ command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:IRQ? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:IRQ? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:IRQ:VALue command.

len property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:LEN command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:LEN? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:LEN? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:LEN:VALue command.

logicaladdress property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:LOGICALADDRess command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:LOGICALADDRess? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:LOGICALADDRess? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:LOGICALADDRess:VALue command.

mailbox property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:MAILbox command.

Description
  • This command sets or queries the Mailbox fields in EtherCAT bus. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:MAILbox? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:MAILbox? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:MAILbox value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:MAILbox {MAILBOXHEADer|SERVICEDATa|ERRSERVICEDATa}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:MAILbox?
Info
  • MAILBOXHEADer specifies the Mailbox fields as mailbox header. This is the default value.
  • SERVICEDATa specifies the Mailbox fields as service data.
  • ERRSERVICEDATa specifies the Mailbox fields as error reply service data.
Sub-properties
  • .address: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:MAILbox:ADDRess command tree.
  • .cnt: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:MAILbox:CNT command tree.
  • .detail: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:MAILbox:DETail command.
  • .header: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:MAILbox:HEADer command.

mailboxtype property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:MAILBOXTYPe command.

Description
  • This command sets or queries the Mailbox Type fields in EtherCAT bus. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:MAILBOXTYPe? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:MAILBOXTYPe? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:MAILBOXTYPe value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:MAILBOXTYPe {ZERo|ONE|TWO|THRee|FOUR|FIVe|RESERved|FIFTeen}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:MAILBOXTYPe?
Info
  • ZERo specifies the Mailbox Type as ZERo. This is the default value.
  • ONE specifies the Mailbox Type as ONE.
  • TWO specifies the Mailbox Type as TWO.
  • THRee specifies the Mailbox Type as THRee.
  • FOUR specifies the Mailbox Type as FOUR.
  • FIVe specifies the Mailbox Type as FIVe.
  • RESERved specifies the Mailbox Type as RESERved.
  • FIFTeen specifies the Mailbox Type as FIFTeen.

network property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:NETWork command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:NETWork? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:NETWork? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .variable: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:NETWork:VARiable command.

networkvariable property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:NETWORKVARiable command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:NETWORKVARiable? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:NETWORKVARiable? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .data: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:NETWORKVARiable:DATa command tree.

offset property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:OFFSet command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:OFFSet? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:OFFSet? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:OFFSet:VALue command.

position property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:POSition command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:POSition? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:POSition? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:POSition:VALue command.

protocoltype property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:PROTOCOLTYPe command.

Description
  • This command sets or queries the EtherCAT Protocol Type in EtherCAT bus. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:PROTOCOLTYPe? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:PROTOCOLTYPe? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:PROTOCOLTYPe value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:PROTOCOLTYPe {PDU|NETWORKVARiables|MAILbox}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:PROTOCOLTYPe?
Info
  • PDU specifies the Protocol Type as PDU. This is the default value.
  • NETWORKVARiables specifies the Protocol Type as NETWORKVARiables.
  • MAILbox specifies the Protocol Type as MAILbox.

pubid property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:PUBID command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:PUBID? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:PUBID? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:PUBID:VALue command.

quality property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:QUALity command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:QUALity? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:QUALity? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:QUALity:VALue command.

service property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:SERVice command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:SERVice? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:SERVice? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .data: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:SERVice:DATa command tree.

sourceaddress property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:SOURCEADDRess command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:SOURCEADDRess? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:SOURCEADDRess? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:SOURCEADDRess:VALue command.

src property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:SRC command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:SRC? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:SRC? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .port: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:SRC:PORT command tree.

tci property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:TCI command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:TCI? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:TCI? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:TCI:VALue command.

wkc property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:WKC command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:WKC? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:WKC? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:WKC:VALue command.

SearchSearchItemTriggerABusEthercatAddressmode

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:ADDRESSMODe command.

Description
  • This command sets or queries the Address Mode in EtherCAT bus. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:ADDRESSMODe? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:ADDRESSMODe? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:ADDRESSMODe value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:ADDRESSMODe {DEVice|LOGical}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:ADDRESSMODe?
Info
  • DEVice sets the Address Mode to Device. This is the default value.
  • LOGical sets the Address Mode to Logical.

SearchSearchItemTriggerABusEthercatCntnv

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:CNTNV command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:CNTNV? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:CNTNV? query and raise an AssertionError if the returned value does not match value.
Properties
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:CNTNV:VALue command.

value property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:CNTNV:VALue command.

Description
  • This command sets the binary Network Variable Count to be used for EtherCAT bus. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:CNTNV:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:CNTNV:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:CNTNV:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:CNTNV:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:CNTNV:VALue?
Info
  • <QString> is the binary Network Variable Count to be used when searching on an EtherCAT bus signal. The default size and value of Network Variable Count is 16 bits and ‘XXXXXXXX XXXXXXXX’ respectively.

SearchSearchItemTriggerABusEthercatCntnvValue

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:CNTNV:VALue command.

Description
  • This command sets the binary Network Variable Count to be used for EtherCAT bus. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:CNTNV:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:CNTNV:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:CNTNV:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:CNTNV:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:CNTNV:VALue?
Info
  • <QString> is the binary Network Variable Count to be used when searching on an EtherCAT bus signal. The default size and value of Network Variable Count is 16 bits and ‘XXXXXXXX XXXXXXXX’ respectively.

SearchSearchItemTriggerABusEthercatCommandtype

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:COMMANDTYPe command.

Description
  • This command sets or queries the Command Type in EtherCAT bus. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:COMMANDTYPe? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:COMMANDTYPe? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:COMMANDTYPe value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:COMMANDTYPe {NOP|APRD|APWR|APRW|FPRD|FPWR|FPRW|BRD|BWR|BRW|LRD|LWR|LRW|ARMW|FRMW|REServed}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:COMMANDTYPe?
Info
  • NOP specifies the Command Type and sets it to NOP. This is the default value.
  • APRD specifies the Command Type and sets it to APRD.
  • APWR specifies the Command Type and sets it to APWR.
  • APRW specifies the Command Type and sets it to APRW.
  • FPRD specifies the Command Type and sets it to FPRD.
  • FPWR specifies the Command Type and sets it to FPWR.
  • FPRW specifies the Command Type and sets it to FPRW.
  • BRD specifies the Command Type and sets it to BRD.
  • BWR specifies the Command Type and sets it to BWR.
  • BRW specifies the Command Type and sets it to BRW.
  • LRD specifies the Command Type and sets it to LRD.
  • LWR specifies the Command Type and sets it to LWR.
  • LRW specifies the Command Type and sets it to LRW.
  • ARMW specifies the Command Type and sets it to ARMW.
  • FRMW specifies the Command Type and sets it to FRMW.
  • REServed specifies the Command Type and sets it to REServed.

SearchSearchItemTriggerABusEthercatCondition

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:CONDition command.

Description
  • This command sets or queries the trigger condition for a EtherCAT bus. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:CONDition? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:CONDition? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:CONDition value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:CONDition {SOF|PROTocol|IPHEADer|UDPIPHEADer|MACADDRess|TCI|ECATHEADERLENGth|DATagram|NETWORKVARiable|MAILBOX|FCSERRor|EOF}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:CONDition?
Info
  • SOF specifies the field within a EtherCAT frame to search on as SOF. This is the default value.
  • PROTocol specifies the field within a EtherCAT frame to search on as PROTocol.
  • IPHEADer specifies the field within a EtherCAT frame to search on as IPHEADer.
  • UDPIPHEADer specifies the field within a EtherCAT frame to search on as UDPIPHEADer.
  • MACADDRess specifies the field within a EtherCAT frame to search on as MACADDRess.
  • TCI specifies the field within a EtherCAT frame to search on as TCI.
  • ECATHEADERLENGth specifies the field within a EtherCAT frame to search on as ECATHEADERLENGth.
  • DATagram specifies the field within a EtherCAT frame to search on as DATagram.
  • NETWORKVARiable specifies the field within a EtherCAT frame to search on as NETWORKVARiable.
  • MAILBOX specifies the field within a EtherCAT frame to search on as MAILBOX.
  • FCSERRor specifies the field within a EtherCAT frame to search on as FCSERRor.
  • EOF specifies the field within a EtherCAT frame to search on as EOF.

SearchSearchItemTriggerABusEthercatCyc

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:CYC command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:CYC? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:CYC? query and raise an AssertionError if the returned value does not match value.
Properties
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:CYC:VALue command.

value property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:CYC:VALue command.

Description
  • This command sets the binary Cycle Number to be used for EtherCAT bus. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:CYC:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:CYC:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:CYC:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:CYC:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:CYC:VALue?
Info
  • <QString> is the binary Cycle Number to be used when searching on an EtherCAT bus signal. The default size and value of Network Variable Count is 16 bits and ‘XXXXXXXX XXXXXXXX’ respectively.

SearchSearchItemTriggerABusEthercatCycValue

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:CYC:VALue command.

Description
  • This command sets the binary Cycle Number to be used for EtherCAT bus. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:CYC:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:CYC:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:CYC:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:CYC:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:CYC:VALue?
Info
  • <QString> is the binary Cycle Number to be used when searching on an EtherCAT bus signal. The default size and value of Network Variable Count is 16 bits and ‘XXXXXXXX XXXXXXXX’ respectively.

SearchSearchItemTriggerABusEthercatData

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:DATa command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:DATa? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:DATa? query and raise an AssertionError if the returned value does not match value.
Properties
  • .size: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:DATa:SIZe command.
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:DATa:VALue command.

size property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:DATa:SIZe command.

Description
  • This command specifies the length of the data string in bytes to be used for EtherCAT bus. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:DATa:SIZe? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:DATa:SIZe? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:DATa:SIZe value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:DATa:SIZe <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:DATa:SIZe?
Info
  • <NR1> is the binary data value to be used when searching on an Ethernet bus signal. The default size is 1. The valid range is 1 to 5.

value property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:DATa:VALue command.

Description
  • This command specifies the binary data string used for EtherCAT bus. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:DATa:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:DATa:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:DATa:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:DATa:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:DATa:VALue?
Info
  • <QString> is the binary Cycle Number to be used when searching on an EtherCAT bus signal. The default data size and value is 8 bits and ‘XXXXXXXX’ respectively.

SearchSearchItemTriggerABusEthercatDataSize

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:DATa:SIZe command.

Description
  • This command specifies the length of the data string in bytes to be used for EtherCAT bus. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:DATa:SIZe? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:DATa:SIZe? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:DATa:SIZe value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:DATa:SIZe <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:DATa:SIZe?
Info
  • <NR1> is the binary data value to be used when searching on an Ethernet bus signal. The default size is 1. The valid range is 1 to 5.

SearchSearchItemTriggerABusEthercatDataValue

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:DATa:VALue command.

Description
  • This command specifies the binary data string used for EtherCAT bus. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:DATa:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:DATa:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:DATa:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:DATa:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:DATa:VALue?
Info
  • <QString> is the binary Cycle Number to be used when searching on an EtherCAT bus signal. The default data size and value is 8 bits and ‘XXXXXXXX’ respectively.

SearchSearchItemTriggerABusEthercatDatagram

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:DATAGRAM command.

Description
  • This command sets or queries the Datagram fields in EtherCAT bus. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:DATAGRAM? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:DATAGRAM? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:DATAGRAM value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:DATAGRAM {HEADer|DATa|WKC}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:DATAGRAM?
Info
  • HEADer specifies the Datagram field and sets it to Header. This is the default value.
  • DATa specifies the Datagram field and sets it to Data.
  • WKC specifies the Datagram field and sets it to WKC.

SearchSearchItemTriggerABusEthercatDatagramheader

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:DATAGRAMHEADer command.

Description
  • This command sets or queries the Datagram Header fields in EtherCAT bus. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:DATAGRAMHEADer? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:DATAGRAMHEADer? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:DATAGRAMHEADer value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:DATAGRAMHEADer {CMD|IDX|ADDRess|LEN|CIRCulating|IRQ}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:DATAGRAMHEADer?
Info
  • CMD specifies the Datagram Header field as CMD. This is the default value.
  • IDX specifies the Datagram Header field as IDX.
  • ADDRess specifies the Datagram Header field as ADDRess.
  • LEN specifies the Datagram Header field as LEN.
  • CIRCulating specifies the Datagram Header field as CIRCulating.
  • IRQ specifies the Datagram Header field as IRQ.
Properties
  • .length: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:DATAGRAMHEADer:LENGth command.

length property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:DATAGRAMHEADer:LENGth command.

Description
  • This command sets the binary Datagram length information to be used for EtherCAT bus. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:DATAGRAMHEADer:LENGth? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:DATAGRAMHEADer:LENGth? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:DATAGRAMHEADer:LENGth value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:DATAGRAMHEADer:LENGth <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:DATAGRAMHEADer:LENGth?
Info
  • <QString> is the binary Datagram length information to be used when searching on an EtherCAT bus signal. The default size and value Datagram length information is 11 bits and ‘XXXXXXXX XXX’ respectively.

SearchSearchItemTriggerABusEthercatDatagramheaderLength

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:DATAGRAMHEADer:LENGth command.

Description
  • This command sets the binary Datagram length information to be used for EtherCAT bus. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:DATAGRAMHEADer:LENGth? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:DATAGRAMHEADer:LENGth? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:DATAGRAMHEADer:LENGth value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:DATAGRAMHEADer:LENGth <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:DATAGRAMHEADer:LENGth?
Info
  • <QString> is the binary Datagram length information to be used when searching on an EtherCAT bus signal. The default size and value Datagram length information is 11 bits and ‘XXXXXXXX XXX’ respectively.

SearchSearchItemTriggerABusEthercatDestinationaddress

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:DESTINATIONADDRess command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:DESTINATIONADDRess? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:DESTINATIONADDRess? query and raise an AssertionError if the returned value does not match value.
Properties
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:DESTINATIONADDRess:VALue command.

value property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:DESTINATIONADDRess:VALue command.

Description
  • This command sets the binary MAC destination address value to be used for EtherCAT bus. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:DESTINATIONADDRess:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:DESTINATIONADDRess:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:DESTINATIONADDRess:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:DESTINATIONADDRess:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:DESTINATIONADDRess:VALue?
Info
  • <QString> is the binary MAC destination address value to be used when searching on an EtherCAT bus signal. The default size and value of MAC Destination Address is 48 bits and ‘XXXXXXXX XXXXXXXX XXXXXXXXXXXXXXXX XXXXXXXX XXXXXXXX’ respectively.

SearchSearchItemTriggerABusEthercatDestinationaddressValue

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:DESTINATIONADDRess:VALue command.

Description
  • This command sets the binary MAC destination address value to be used for EtherCAT bus. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:DESTINATIONADDRess:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:DESTINATIONADDRess:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:DESTINATIONADDRess:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:DESTINATIONADDRess:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:DESTINATIONADDRess:VALue?
Info
  • <QString> is the binary MAC destination address value to be used when searching on an EtherCAT bus signal. The default size and value of MAC Destination Address is 48 bits and ‘XXXXXXXX XXXXXXXX XXXXXXXXXXXXXXXX XXXXXXXX XXXXXXXX’ respectively.

SearchSearchItemTriggerABusEthercatDeviceaddress

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:DEVICEADDRess command.

Description
  • This command sets or queries the Device Address in EtherCAT bus. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:DEVICEADDRess? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:DEVICEADDRess? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:DEVICEADDRess value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:DEVICEADDRess {POSition|OFFSet}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:DEVICEADDRess?
Info
  • POSition specifies the Device Address to position. This is the default value.
  • OFFSet specifies the Device Address to offset.

SearchSearchItemTriggerABusEthercatError

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:ERRor command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:ERRor? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:ERRor? query and raise an AssertionError if the returned value does not match value.
Properties
  • .reply: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:ERRor:REPLy command tree.

reply property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:ERRor:REPLy command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:ERRor:REPLy? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:ERRor:REPLy? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .service: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:ERRor:REPLy:SERVice command tree.

SearchSearchItemTriggerABusEthercatErrorReply

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:ERRor:REPLy command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:ERRor:REPLy? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:ERRor:REPLy? query and raise an AssertionError if the returned value does not match value.
Properties
  • .service: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:ERRor:REPLy:SERVice command tree.

service property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:ERRor:REPLy:SERVice command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:ERRor:REPLy:SERVice? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:ERRor:REPLy:SERVice? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .data: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:ERRor:REPLy:SERVice:DATa command.

SearchSearchItemTriggerABusEthercatErrorReplyService

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:ERRor:REPLy:SERVice command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:ERRor:REPLy:SERVice? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:ERRor:REPLy:SERVice? query and raise an AssertionError if the returned value does not match value.
Properties
  • .data: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:ERRor:REPLy:SERVice:DATa command.

data property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:ERRor:REPLy:SERVice:DATa command.

Description
  • This command sets or queries the error reply service data fields in EtherCAT bus. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:ERRor:REPLy:SERVice:DATa? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:ERRor:REPLy:SERVice:DATa? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:ERRor:REPLy:SERVice:DATa value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:ERRor:REPLy:SERVice:DATa {TYPe|DETail}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:ERRor:REPLy:SERVice:DATa?
Info
  • TYPe specifies the Error Reply Service Data to type. This is the default value.
  • DETail specifies the Error Reply Service Data to detail.

SearchSearchItemTriggerABusEthercatErrorReplyServiceData

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:ERRor:REPLy:SERVice:DATa command.

Description
  • This command sets or queries the error reply service data fields in EtherCAT bus. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:ERRor:REPLy:SERVice:DATa? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:ERRor:REPLy:SERVice:DATa? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:ERRor:REPLy:SERVice:DATa value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:ERRor:REPLy:SERVice:DATa {TYPe|DETail}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:ERRor:REPLy:SERVice:DATa?
Info
  • TYPe specifies the Error Reply Service Data to type. This is the default value.
  • DETail specifies the Error Reply Service Data to detail.

SearchSearchItemTriggerABusEthercatFrametype

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:FRAMETYPe command.

Description
  • This command sets or queries the Frame Type in EtherCAT bus. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:FRAMETYPe? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:FRAMETYPe? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:FRAMETYPe value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:FRAMETYPe {BASic|UDPIP}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:FRAMETYPe?
Info
  • BASic specifies the Frame Type as BASic. This is the default value.
  • UDPIP specifies the Frame Type as UDPIP.

SearchSearchItemTriggerABusEthercatHash

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:HASH command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:HASH? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:HASH? query and raise an AssertionError if the returned value does not match value.
Properties
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:HASH:VALue command.

value property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:HASH:VALue command.

Description
  • This command sets the binary HASH to be used for EtherCAT bus. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:HASH:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:HASH:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:HASH:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:HASH:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:HASH:VALue?
Info
  • <QString> is the binary Hash value to be used when searching on an EtherCAT bus signal. The default size and value of Hash is 16 bits and ‘XXXXXXXXXXXXXXXX’ respectively.

SearchSearchItemTriggerABusEthercatHashValue

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:HASH:VALue command.

Description
  • This command sets the binary HASH to be used for EtherCAT bus. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:HASH:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:HASH:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:HASH:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:HASH:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:HASH:VALue?
Info
  • <QString> is the binary Hash value to be used when searching on an EtherCAT bus signal. The default size and value of Hash is 16 bits and ‘XXXXXXXXXXXXXXXX’ respectively.

SearchSearchItemTriggerABusEthercatHeader

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:HEADer command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:HEADer? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:HEADer? query and raise an AssertionError if the returned value does not match value.
Properties
  • .length: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:HEADer:LENGth command.

length property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:HEADer:LENGth command.

Description
  • This command sets or queries the binary header length to be used for EtherCAT bus. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:HEADer:LENGth? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:HEADer:LENGth? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:HEADer:LENGth value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:HEADer:LENGth <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:HEADer:LENGth?
Info
  • <QString> is the binary header length to be used when searching on an EtherCAT bus signal. The default size and value of Length is 11 bits and ‘XXXXXXXXXXX’ respectively.

SearchSearchItemTriggerABusEthercatHeaderLength

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:HEADer:LENGth command.

Description
  • This command sets or queries the binary header length to be used for EtherCAT bus. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:HEADer:LENGth? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:HEADer:LENGth? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:HEADer:LENGth value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:HEADer:LENGth <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:HEADer:LENGth?
Info
  • <QString> is the binary header length to be used when searching on an EtherCAT bus signal. The default size and value of Length is 11 bits and ‘XXXXXXXXXXX’ respectively.

SearchSearchItemTriggerABusEthercatIdentification

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:IDENtification command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:IDENtification? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:IDENtification? query and raise an AssertionError if the returned value does not match value.
Properties
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:IDENtification:VALue command.

value property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:IDENtification:VALue command.

Description
  • This command sets the IP Identification to be used for EtherCAT bus. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:IDENtification:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:IDENtification:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:IDENtification:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:IDENtification:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:IDENtification:VALue?
Info
  • <QString> is the binary IP Identification to be used when searching on an EtherCAT bus signal. The default size and value of Identification is 16 bits and ‘XXXXXXXX XXXXXXXX’ respectively.

SearchSearchItemTriggerABusEthercatIdentificationValue

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:IDENtification:VALue command.

Description
  • This command sets the IP Identification to be used for EtherCAT bus. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:IDENtification:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:IDENtification:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:IDENtification:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:IDENtification:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:IDENtification:VALue?
Info
  • <QString> is the binary IP Identification to be used when searching on an EtherCAT bus signal. The default size and value of Identification is 16 bits and ‘XXXXXXXX XXXXXXXX’ respectively.

SearchSearchItemTriggerABusEthercatIdx

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:IDX command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:IDX? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:IDX? query and raise an AssertionError if the returned value does not match value.
Properties
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:IDX:VALue command.

value property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:IDX:VALue command.

Description
  • This command sets the binary Indexing information to be used for EtherCAT bus. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:IDX:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:IDX:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:IDX:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:IDX:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:IDX:VALue?
Info
  • <QString> is the binary Index value to be used when searching on an EtherCAT bus signal. The default size and value of Index is 8 bits and ‘XXXXXXXX’ respectively.

SearchSearchItemTriggerABusEthercatIdxValue

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:IDX:VALue command.

Description
  • This command sets the binary Indexing information to be used for EtherCAT bus. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:IDX:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:IDX:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:IDX:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:IDX:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:IDX:VALue?
Info
  • <QString> is the binary Index value to be used when searching on an EtherCAT bus signal. The default size and value of Index is 8 bits and ‘XXXXXXXX’ respectively.

SearchSearchItemTriggerABusEthercatIndex

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:INDex command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:INDex? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:INDex? query and raise an AssertionError if the returned value does not match value.
Properties
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:INDex:VALue command.

value property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:INDex:VALue command.

Description
  • This command sets the binary Index to be used for EtherCAT bus. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:INDex:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:INDex:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:INDex:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:INDex:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:INDex:VALue?
Info
  • <QString> is the binary Index to be used when searching on an EtherCAT bus signal. The default size and value of Index is 16 bits and ‘XXXXXXXXXXXXXXXX’ respectively.

SearchSearchItemTriggerABusEthercatIndexValue

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:INDex:VALue command.

Description
  • This command sets the binary Index to be used for EtherCAT bus. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:INDex:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:INDex:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:INDex:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:INDex:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:INDex:VALue?
Info
  • <QString> is the binary Index to be used when searching on an EtherCAT bus signal. The default size and value of Index is 16 bits and ‘XXXXXXXXXXXXXXXX’ respectively.

SearchSearchItemTriggerABusEthercatIpdestination

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:IPDESTination command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:IPDESTination? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:IPDESTination? query and raise an AssertionError if the returned value does not match value.
Properties
  • .address: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:IPDESTination:ADDRess command tree.

address property

SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:IPDESTination:ADDRess command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:IPDESTination:ADDRess? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:IPDESTination:ADDRess? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:IPDESTination:ADDRess:VALue command.

SearchSearchItemTriggerABusEthercatIpdestinationAddress

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:IPDESTination:ADDRess command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:IPDESTination:ADDRess? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:IPDESTination:ADDRess? query and raise an AssertionError if the returned value does not match value.
Properties
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:IPDESTination:ADDRess:VALue command.

value property

SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:IPDESTination:ADDRess:VALue command.

Description
  • This command sets the Destination IP Address to be used for EtherCAT bus. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:IPDESTination:ADDRess:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:IPDESTination:ADDRess:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:IPDESTination:ADDRess:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:IPDESTination:ADDRess:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:IPDESTination:ADDRess:VALue?
Info
  • <QString> is the binary Destination IP Address to be used when searching on an EtherCAT bus signal. The default size and value of Destination Address is 32 bits and ‘XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX’.

SearchSearchItemTriggerABusEthercatIpdestinationAddressValue

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:IPDESTination:ADDRess:VALue command.

Description
  • This command sets the Destination IP Address to be used for EtherCAT bus. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:IPDESTination:ADDRess:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:IPDESTination:ADDRess:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:IPDESTination:ADDRess:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:IPDESTination:ADDRess:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:IPDESTination:ADDRess:VALue?
Info
  • <QString> is the binary Destination IP Address to be used when searching on an EtherCAT bus signal. The default size and value of Destination Address is 32 bits and ‘XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX’.

SearchSearchItemTriggerABusEthercatIpsource

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:IPSOURce command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:IPSOURce? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:IPSOURce? query and raise an AssertionError if the returned value does not match value.
Properties
  • .address: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:IPSOURce:ADDRess command tree.

address property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:IPSOURce:ADDRess command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:IPSOURce:ADDRess? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:IPSOURce:ADDRess? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:IPSOURce:ADDRess:VALue command.

SearchSearchItemTriggerABusEthercatIpsourceAddress

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:IPSOURce:ADDRess command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:IPSOURce:ADDRess? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:IPSOURce:ADDRess? query and raise an AssertionError if the returned value does not match value.
Properties
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:IPSOURce:ADDRess:VALue command.

value property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:IPSOURce:ADDRess:VALue command.

Description
  • This command sets the Source IP Address to be used for EtherCAT bus. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:IPSOURce:ADDRess:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:IPSOURce:ADDRess:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:IPSOURce:ADDRess:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:IPSOURce:ADDRess:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:IPSOURce:ADDRess:VALue?
Info
  • <QString> is the binary Source IP Address to be used when searching on an EtherCAT bus signal. The default size and value of Source Address is 32 bits and ‘XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX’.

SearchSearchItemTriggerABusEthercatIpsourceAddressValue

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:IPSOURce:ADDRess:VALue command.

Description
  • This command sets the Source IP Address to be used for EtherCAT bus. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:IPSOURce:ADDRess:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:IPSOURce:ADDRess:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:IPSOURce:ADDRess:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:IPSOURce:ADDRess:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:IPSOURce:ADDRess:VALue?
Info
  • <QString> is the binary Source IP Address to be used when searching on an EtherCAT bus signal. The default size and value of Source Address is 32 bits and ‘XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX’.

SearchSearchItemTriggerABusEthercatIrq

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:IRQ command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:IRQ? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:IRQ? query and raise an AssertionError if the returned value does not match value.
Properties
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:IRQ:VALue command.

value property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:IRQ:VALue command.

Description
  • This command sets the binary interrupt request information to be used for EtherCAT bus. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:IRQ:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:IRQ:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:IRQ:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:IRQ:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:IRQ:VALue?
Info
  • <QString> is the binary interrupt request information to be used when searching on an EtherCAT bus signal. The default size and value interrupt request information is 16 bits and ‘XXXXXXXX XXXXXXXX’ respectively.

SearchSearchItemTriggerABusEthercatIrqValue

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:IRQ:VALue command.

Description
  • This command sets the binary interrupt request information to be used for EtherCAT bus. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:IRQ:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:IRQ:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:IRQ:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:IRQ:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:IRQ:VALue?
Info
  • <QString> is the binary interrupt request information to be used when searching on an EtherCAT bus signal. The default size and value interrupt request information is 16 bits and ‘XXXXXXXX XXXXXXXX’ respectively.

SearchSearchItemTriggerABusEthercatLen

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:LEN command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:LEN? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:LEN? query and raise an AssertionError if the returned value does not match value.
Properties
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:LEN:VALue command.

value property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:LEN:VALue command.

Description
  • This command sets the binary Length to be used for EtherCAT bus. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:LEN:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:LEN:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:LEN:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:LEN:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:LEN:VALue?
Info
  • <QString> is the binary Length to be used when searching on an EtherCAT bus signal. The default size and value of Length is 16 bits and ‘XXXXXXXXXXXXXXXX’ respectively.

SearchSearchItemTriggerABusEthercatLenValue

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:LEN:VALue command.

Description
  • This command sets the binary Length to be used for EtherCAT bus. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:LEN:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:LEN:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:LEN:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:LEN:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:LEN:VALue?
Info
  • <QString> is the binary Length to be used when searching on an EtherCAT bus signal. The default size and value of Length is 16 bits and ‘XXXXXXXXXXXXXXXX’ respectively.

SearchSearchItemTriggerABusEthercatLogicaladdress

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:LOGICALADDRess command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:LOGICALADDRess? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:LOGICALADDRess? query and raise an AssertionError if the returned value does not match value.
Properties
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:LOGICALADDRess:VALue command.

value property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:LOGICALADDRess:VALue command.

Description
  • This command sets the binary logical address information to be used for EtherCAT bus. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:LOGICALADDRess:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:LOGICALADDRess:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:LOGICALADDRess:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:LOGICALADDRess:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:LOGICALADDRess:VALue?
Info
  • <QString> is the binary Logical Address to be used when searching on an EtherCAT bus signal. The default size and value Logical Address is 32 bits and ‘XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX’ respectively.

SearchSearchItemTriggerABusEthercatLogicaladdressValue

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:LOGICALADDRess:VALue command.

Description
  • This command sets the binary logical address information to be used for EtherCAT bus. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:LOGICALADDRess:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:LOGICALADDRess:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:LOGICALADDRess:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:LOGICALADDRess:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:LOGICALADDRess:VALue?
Info
  • <QString> is the binary Logical Address to be used when searching on an EtherCAT bus signal. The default size and value Logical Address is 32 bits and ‘XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX’ respectively.

SearchSearchItemTriggerABusEthercatMailbox

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:MAILbox command.

Description
  • This command sets or queries the Mailbox fields in EtherCAT bus. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:MAILbox? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:MAILbox? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:MAILbox value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:MAILbox {MAILBOXHEADer|SERVICEDATa|ERRSERVICEDATa}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:MAILbox?
Info
  • MAILBOXHEADer specifies the Mailbox fields as mailbox header. This is the default value.
  • SERVICEDATa specifies the Mailbox fields as service data.
  • ERRSERVICEDATa specifies the Mailbox fields as error reply service data.
Properties
  • .address: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:MAILbox:ADDRess command tree.
  • .cnt: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:MAILbox:CNT command tree.
  • .detail: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:MAILbox:DETail command.
  • .header: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:MAILbox:HEADer command.

address property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:MAILbox:ADDRess command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:MAILbox:ADDRess? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:MAILbox:ADDRess? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:MAILbox:ADDRess:VALue command.

cnt property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:MAILbox:CNT command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:MAILbox:CNT? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:MAILbox:CNT? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:MAILbox:CNT:VALue command.

detail property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:MAILbox:DETail command.

Description
  • This command sets or queries the Error Reply Service Data Details in EtherCAT bus. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:MAILbox:DETail? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:MAILbox:DETail? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:MAILbox:DETail value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:MAILbox:DETail {ONE|TWO|THRee|FOUR|FIVe|SIX|SEVEn|EIGHt|NINe}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:MAILbox:DETail?
Info
  • ON E specifies the Detail field as ONE. This is the default value.
  • TWO specifies the Detail field as TWO.
  • THRee specifies the Detail field as THRee.
  • FOUR specifies the Detail field as FOUR.
  • FIVe specifies the Detail field as FIVe.
  • SIX specifies the Detail field as SIX.
  • SEVEn specifies the Detail field as SEVEn.
  • EIGHt specifies the Detail field as EIGHt.
  • NINe specifies the Detail field as NINe.

header property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:MAILbox:HEADer command.

Description
  • This command sets or queries the Mailbox Header fields in EtherCAT bus. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:MAILbox:HEADer? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:MAILbox:HEADer? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:MAILbox:HEADer value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:MAILbox:HEADer {LENGth|ADDRess|CHANnel|PRIority|TYPe|CNT}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:MAILbox:HEADer?
Info
  • LENGth specifies the Mailbox Header as Length. This is the default value.
  • ADDRess specifies the Mailbox Header as Address.
  • CHANnel specifies the Mailbox Header as Channel.
  • PRIority specifies the Mailbox Header as Priority.
  • TYPe specifies the Mailbox Header as Type.
  • CNT specifies the Mailbox Header as Count.

SearchSearchItemTriggerABusEthercatMailboxAddress

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:MAILbox:ADDRess command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:MAILbox:ADDRess? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:MAILbox:ADDRess? query and raise an AssertionError if the returned value does not match value.
Properties
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:MAILbox:ADDRess:VALue command.

value property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:MAILbox:ADDRess:VALue command.

Description
  • This command sets the binary Mailbox Address to be used for EtherCAT bus. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:MAILbox:ADDRess:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:MAILbox:ADDRess:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:MAILbox:ADDRess:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:MAILbox:ADDRess:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:MAILbox:ADDRess:VALue?
Info
  • <QString> is the binary Mailbox Address to be used when searching on an EtherCAT bus signal. The default size and value of Address is 16 bits and ‘XXXXXXXX XXXXXXXX’ respectively.

SearchSearchItemTriggerABusEthercatMailboxAddressValue

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:MAILbox:ADDRess:VALue command.

Description
  • This command sets the binary Mailbox Address to be used for EtherCAT bus. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:MAILbox:ADDRess:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:MAILbox:ADDRess:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:MAILbox:ADDRess:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:MAILbox:ADDRess:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:MAILbox:ADDRess:VALue?
Info
  • <QString> is the binary Mailbox Address to be used when searching on an EtherCAT bus signal. The default size and value of Address is 16 bits and ‘XXXXXXXX XXXXXXXX’ respectively.

SearchSearchItemTriggerABusEthercatMailboxCnt

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:MAILbox:CNT command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:MAILbox:CNT? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:MAILbox:CNT? query and raise an AssertionError if the returned value does not match value.
Properties
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:MAILbox:CNT:VALue command.

value property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:MAILbox:CNT:VALue command.

Description
  • This command sets the binary counter of the mailbox services to be used for EtherCAT bus. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:MAILbox:CNT:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:MAILbox:CNT:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:MAILbox:CNT:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:MAILbox:CNT:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:MAILbox:CNT:VALue?
Info
  • <QString> is the binary Counter value to be used when searching on an EtherCAT bus signal. The default size and value of Counter is 3 bits and ‘XXX’ respectively.

SearchSearchItemTriggerABusEthercatMailboxCntValue

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:MAILbox:CNT:VALue command.

Description
  • This command sets the binary counter of the mailbox services to be used for EtherCAT bus. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:MAILbox:CNT:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:MAILbox:CNT:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:MAILbox:CNT:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:MAILbox:CNT:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:MAILbox:CNT:VALue?
Info
  • <QString> is the binary Counter value to be used when searching on an EtherCAT bus signal. The default size and value of Counter is 3 bits and ‘XXX’ respectively.

SearchSearchItemTriggerABusEthercatMailboxDetail

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:MAILbox:DETail command.

Description
  • This command sets or queries the Error Reply Service Data Details in EtherCAT bus. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:MAILbox:DETail? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:MAILbox:DETail? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:MAILbox:DETail value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:MAILbox:DETail {ONE|TWO|THRee|FOUR|FIVe|SIX|SEVEn|EIGHt|NINe}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:MAILbox:DETail?
Info
  • ON E specifies the Detail field as ONE. This is the default value.
  • TWO specifies the Detail field as TWO.
  • THRee specifies the Detail field as THRee.
  • FOUR specifies the Detail field as FOUR.
  • FIVe specifies the Detail field as FIVe.
  • SIX specifies the Detail field as SIX.
  • SEVEn specifies the Detail field as SEVEn.
  • EIGHt specifies the Detail field as EIGHt.
  • NINe specifies the Detail field as NINe.

SearchSearchItemTriggerABusEthercatMailboxHeader

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:MAILbox:HEADer command.

Description
  • This command sets or queries the Mailbox Header fields in EtherCAT bus. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:MAILbox:HEADer? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:MAILbox:HEADer? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:MAILbox:HEADer value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:MAILbox:HEADer {LENGth|ADDRess|CHANnel|PRIority|TYPe|CNT}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:MAILbox:HEADer?
Info
  • LENGth specifies the Mailbox Header as Length. This is the default value.
  • ADDRess specifies the Mailbox Header as Address.
  • CHANnel specifies the Mailbox Header as Channel.
  • PRIority specifies the Mailbox Header as Priority.
  • TYPe specifies the Mailbox Header as Type.
  • CNT specifies the Mailbox Header as Count.

SearchSearchItemTriggerABusEthercatMailboxtype

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:MAILBOXTYPe command.

Description
  • This command sets or queries the Mailbox Type fields in EtherCAT bus. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:MAILBOXTYPe? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:MAILBOXTYPe? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:MAILBOXTYPe value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:MAILBOXTYPe {ZERo|ONE|TWO|THRee|FOUR|FIVe|RESERved|FIFTeen}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:MAILBOXTYPe?
Info
  • ZERo specifies the Mailbox Type as ZERo. This is the default value.
  • ONE specifies the Mailbox Type as ONE.
  • TWO specifies the Mailbox Type as TWO.
  • THRee specifies the Mailbox Type as THRee.
  • FOUR specifies the Mailbox Type as FOUR.
  • FIVe specifies the Mailbox Type as FIVe.
  • RESERved specifies the Mailbox Type as RESERved.
  • FIFTeen specifies the Mailbox Type as FIFTeen.

SearchSearchItemTriggerABusEthercatNetwork

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:NETWork command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:NETWork? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:NETWork? query and raise an AssertionError if the returned value does not match value.
Properties
  • .variable: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:NETWork:VARiable command.

variable property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:NETWork:VARiable command.

Description
  • This command sets or queries the Network Variable fields in EtherCAT bus. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:NETWork:VARiable? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:NETWork:VARiable? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:NETWork:VARiable value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:NETWork:VARiable {PUBHEADer|NVHEADer|NVDATa}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:NETWork:VARiable?
Info
  • PUBHEADer specifies the Network Variable as PUBHEADer. This is the default value.
  • NVHEADer specifies the Network Variable as NVHEADer.
  • NVDATa specifies the Network Variable as NVDATa.
Sub-properties
  • .header: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:NETWork:VARiable:HEADer command.

SearchSearchItemTriggerABusEthercatNetworkVariable

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:NETWork:VARiable command.

Description
  • This command sets or queries the Network Variable fields in EtherCAT bus. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:NETWork:VARiable? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:NETWork:VARiable? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:NETWork:VARiable value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:NETWork:VARiable {PUBHEADer|NVHEADer|NVDATa}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:NETWork:VARiable?
Info
  • PUBHEADer specifies the Network Variable as PUBHEADer. This is the default value.
  • NVHEADer specifies the Network Variable as NVHEADer.
  • NVDATa specifies the Network Variable as NVDATa.
Properties
  • .header: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:NETWork:VARiable:HEADer command.

header property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:NETWork:VARiable:HEADer command.

Description
  • This command sets or queries the Network Variable Header fields in EtherCAT bus. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:NETWork:VARiable:HEADer? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:NETWork:VARiable:HEADer? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:NETWork:VARiable:HEADer value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:NETWork:VARiable:HEADer {INDex|HASH|NVLEN|Q}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:NETWork:VARiable:HEADer?
Info
  • INDex specifies the Network Variable Header field as INDex. This is the default value.
  • HASH specifies the Network Variable Header field as HASH.
  • NVLEN specifies the Network Variable Header field as NVLEN.
  • Q specifies the Network Variable Header field as Q.

SearchSearchItemTriggerABusEthercatNetworkVariableHeader

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:NETWork:VARiable:HEADer command.

Description
  • This command sets or queries the Network Variable Header fields in EtherCAT bus. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:NETWork:VARiable:HEADer? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:NETWork:VARiable:HEADer? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:NETWork:VARiable:HEADer value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:NETWork:VARiable:HEADer {INDex|HASH|NVLEN|Q}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:NETWork:VARiable:HEADer?
Info
  • INDex specifies the Network Variable Header field as INDex. This is the default value.
  • HASH specifies the Network Variable Header field as HASH.
  • NVLEN specifies the Network Variable Header field as NVLEN.
  • Q specifies the Network Variable Header field as Q.

SearchSearchItemTriggerABusEthercatNetworkvariable

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:NETWORKVARiable command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:NETWORKVARiable? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:NETWORKVARiable? query and raise an AssertionError if the returned value does not match value.
Properties
  • .data: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:NETWORKVARiable:DATa command tree.

data property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:NETWORKVARiable:DATa command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:NETWORKVARiable:DATa? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:NETWORKVARiable:DATa? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .size: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:NETWORKVARiable:DATa:SIZe command.
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:NETWORKVARiable:DATa:VALue command.

SearchSearchItemTriggerABusEthercatNetworkvariableData

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:NETWORKVARiable:DATa command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:NETWORKVARiable:DATa? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:NETWORKVARiable:DATa? query and raise an AssertionError if the returned value does not match value.
Properties
  • .size: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:NETWORKVARiable:DATa:SIZe command.
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:NETWORKVARiable:DATa:VALue command.

size property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:NETWORKVARiable:DATa:SIZe command.

Description
  • This command specifies the length of the network variable data string in bytes to be used for EtherCAT bus. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:NETWORKVARiable:DATa:SIZe? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:NETWORKVARiable:DATa:SIZe? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:NETWORKVARiable:DATa:SIZe value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:NETWORKVARiable:DATa:SIZe <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:NETWORKVARiable:DATa:SIZe?
Info
  • <NR1> is the Network Variable Data size. The default value is 1. The valid range is 1 to 5.

value property

SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:NETWORKVARiable:DATa:VALue command.

Description
  • This command specifies the binary network variable data string used for EtherCAT bus. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:NETWORKVARiable:DATa:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:NETWORKVARiable:DATa:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:NETWORKVARiable:DATa:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:NETWORKVARiable:DATa:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:NETWORKVARiable:DATa:VALue?
Info
  • <QString> is the binary network variable data value to be used when searching on an EtherCAT bus signal. The default Network Variable Data value is ‘XXXXXXXX’.

SearchSearchItemTriggerABusEthercatNetworkvariableDataSize

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:NETWORKVARiable:DATa:SIZe command.

Description
  • This command specifies the length of the network variable data string in bytes to be used for EtherCAT bus. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:NETWORKVARiable:DATa:SIZe? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:NETWORKVARiable:DATa:SIZe? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:NETWORKVARiable:DATa:SIZe value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:NETWORKVARiable:DATa:SIZe <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:NETWORKVARiable:DATa:SIZe?
Info
  • <NR1> is the Network Variable Data size. The default value is 1. The valid range is 1 to 5.

SearchSearchItemTriggerABusEthercatNetworkvariableDataValue

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:NETWORKVARiable:DATa:VALue command.

Description
  • This command specifies the binary network variable data string used for EtherCAT bus. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:NETWORKVARiable:DATa:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:NETWORKVARiable:DATa:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:NETWORKVARiable:DATa:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:NETWORKVARiable:DATa:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:NETWORKVARiable:DATa:VALue?
Info
  • <QString> is the binary network variable data value to be used when searching on an EtherCAT bus signal. The default Network Variable Data value is ‘XXXXXXXX’.

SearchSearchItemTriggerABusEthercatOffset

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:OFFSet command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:OFFSet? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:OFFSet? query and raise an AssertionError if the returned value does not match value.
Properties
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:OFFSet:VALue command.

value property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:OFFSet:VALue command.

Description
  • This command sets the binary address offset information to be used for EtherCAT bus. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:OFFSet:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:OFFSet:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:OFFSet:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:OFFSet:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:OFFSet:VALue?
Info
  • <QString> is the binary Address Offset data value to be used when searching on an EtherCAT bus signal. The default size and value Address Offset is 16 bits and’XXXXXXXX XXXXXXXX’ respectively.

SearchSearchItemTriggerABusEthercatOffsetValue

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:OFFSet:VALue command.

Description
  • This command sets the binary address offset information to be used for EtherCAT bus. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:OFFSet:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:OFFSet:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:OFFSet:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:OFFSet:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:OFFSet:VALue?
Info
  • <QString> is the binary Address Offset data value to be used when searching on an EtherCAT bus signal. The default size and value Address Offset is 16 bits and’XXXXXXXX XXXXXXXX’ respectively.

SearchSearchItemTriggerABusEthercatPosition

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:POSition command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:POSition? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:POSition? query and raise an AssertionError if the returned value does not match value.
Properties
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:POSition:VALue command.

value property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:POSition:VALue command.

Description
  • This command sets the binary address position information to be used for EtherCAT bus. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:POSition:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:POSition:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:POSition:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:POSition:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:POSition:VALue?
Info
  • <QString> is the binary Address Position value to be used when searching on an EtherCAT bus signal. The default size and value Address Position is 16 bits and ‘XXXXXXXX XXXXXXXX’ respectively.

SearchSearchItemTriggerABusEthercatPositionValue

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:POSition:VALue command.

Description
  • This command sets the binary address position information to be used for EtherCAT bus. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:POSition:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:POSition:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:POSition:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:POSition:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:POSition:VALue?
Info
  • <QString> is the binary Address Position value to be used when searching on an EtherCAT bus signal. The default size and value Address Position is 16 bits and ‘XXXXXXXX XXXXXXXX’ respectively.

SearchSearchItemTriggerABusEthercatProtocoltype

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:PROTOCOLTYPe command.

Description
  • This command sets or queries the EtherCAT Protocol Type in EtherCAT bus. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:PROTOCOLTYPe? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:PROTOCOLTYPe? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:PROTOCOLTYPe value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:PROTOCOLTYPe {PDU|NETWORKVARiables|MAILbox}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:PROTOCOLTYPe?
Info
  • PDU specifies the Protocol Type as PDU. This is the default value.
  • NETWORKVARiables specifies the Protocol Type as NETWORKVARiables.
  • MAILbox specifies the Protocol Type as MAILbox.

SearchSearchItemTriggerABusEthercatPubid

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:PUBID command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:PUBID? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:PUBID? query and raise an AssertionError if the returned value does not match value.
Properties
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:PUBID:VALue command.

value property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:PUBID:VALue command.

Description
  • This command sets the binary Publisher ID to be used for EtherCAT bus. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:PUBID:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:PUBID:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:PUBID:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:PUBID:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:PUBID:VALue?
Info
  • <QString> is the binary Publisher ID value to be used when searching on an EtherCAT bus signal. The default size and value of Publisher ID is 48 bits and ‘XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXXXXXXXXXX’ respectively.

SearchSearchItemTriggerABusEthercatPubidValue

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:PUBID:VALue command.

Description
  • This command sets the binary Publisher ID to be used for EtherCAT bus. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:PUBID:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:PUBID:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:PUBID:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:PUBID:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:PUBID:VALue?
Info
  • <QString> is the binary Publisher ID value to be used when searching on an EtherCAT bus signal. The default size and value of Publisher ID is 48 bits and ‘XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXXXXXXXXXX’ respectively.

SearchSearchItemTriggerABusEthercatQuality

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:QUALity command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:QUALity? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:QUALity? query and raise an AssertionError if the returned value does not match value.
Properties
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:QUALity:VALue command.

value property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:QUALity:VALue command.

Description
  • This command sets the binary quality to be used for EtherCAT bus. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:QUALity:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:QUALity:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:QUALity:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:QUALity:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:QUALity:VALue?
Info
  • <QString> is the binary Quality value to be used when searching on an EtherCAT bus signal. The default size and value of Quality is 16 bits and ‘XXXXXXXXXXXXXXXX’ respectively.

SearchSearchItemTriggerABusEthercatQualityValue

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:QUALity:VALue command.

Description
  • This command sets the binary quality to be used for EtherCAT bus. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:QUALity:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:QUALity:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:QUALity:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:QUALity:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:QUALity:VALue?
Info
  • <QString> is the binary Quality value to be used when searching on an EtherCAT bus signal. The default size and value of Quality is 16 bits and ‘XXXXXXXXXXXXXXXX’ respectively.

SearchSearchItemTriggerABusEthercatService

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:SERVice command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:SERVice? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:SERVice? query and raise an AssertionError if the returned value does not match value.
Properties
  • .data: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:SERVice:DATa command tree.

data property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:SERVice:DATa command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:SERVice:DATa? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:SERVice:DATa? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .length: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:SERVice:DATa:LENGth command.
  • .size: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:SERVice:DATa:SIZe command.
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:SERVice:DATa:VALue command.

SearchSearchItemTriggerABusEthercatServiceData

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:SERVice:DATa command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:SERVice:DATa? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:SERVice:DATa? query and raise an AssertionError if the returned value does not match value.
Properties
  • .length: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:SERVice:DATa:LENGth command.
  • .size: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:SERVice:DATa:SIZe command.
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:SERVice:DATa:VALue command.

length property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:SERVice:DATa:LENGth command.

Description
  • This command sets the binary Service Data Length to be used for EtherCAT bus. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:SERVice:DATa:LENGth? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:SERVice:DATa:LENGth? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:SERVice:DATa:LENGth value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:SERVice:DATa:LENGth <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:SERVice:DATa:LENGth?
Info
  • <QString> is the binary Service Data Length to be used when searching on an EtherCAT bus signal. The default size and value of Service Data Length is 16 bits and ‘XXXXXXXX XXXXXXXX’ respectively.

size property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:SERVice:DATa:SIZe command.

Description
  • This command specifies the length of the service data string in bytes to be used for EtherCAT bus. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:SERVice:DATa:SIZe? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:SERVice:DATa:SIZe? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:SERVice:DATa:SIZe value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:SERVice:DATa:SIZe <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:SERVice:DATa:SIZe?
Info
  • <NR1> is the Service Data size. The default value is 1. The valid range is 1 to 5.

value property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:SERVice:DATa:VALue command.

Description
  • This command specifies the length of the service data string in bytes to be used for EtherCAT bus. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:SERVice:DATa:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:SERVice:DATa:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:SERVice:DATa:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:SERVice:DATa:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:SERVice:DATa:VALue?
Info
  • <QString> is the binary Service Data value to be used when searching on an EtherCAT bus signal. The default size and value of Service Data is 8 bits and ‘XXXXXXXX’ respectively.

SearchSearchItemTriggerABusEthercatServiceDataLength

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:SERVice:DATa:LENGth command.

Description
  • This command sets the binary Service Data Length to be used for EtherCAT bus. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:SERVice:DATa:LENGth? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:SERVice:DATa:LENGth? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:SERVice:DATa:LENGth value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:SERVice:DATa:LENGth <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:SERVice:DATa:LENGth?
Info
  • <QString> is the binary Service Data Length to be used when searching on an EtherCAT bus signal. The default size and value of Service Data Length is 16 bits and ‘XXXXXXXX XXXXXXXX’ respectively.

SearchSearchItemTriggerABusEthercatServiceDataSize

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:SERVice:DATa:SIZe command.

Description
  • This command specifies the length of the service data string in bytes to be used for EtherCAT bus. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:SERVice:DATa:SIZe? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:SERVice:DATa:SIZe? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:SERVice:DATa:SIZe value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:SERVice:DATa:SIZe <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:SERVice:DATa:SIZe?
Info
  • <NR1> is the Service Data size. The default value is 1. The valid range is 1 to 5.

SearchSearchItemTriggerABusEthercatServiceDataValue

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:SERVice:DATa:VALue command.

Description
  • This command specifies the length of the service data string in bytes to be used for EtherCAT bus. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:SERVice:DATa:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:SERVice:DATa:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:SERVice:DATa:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:SERVice:DATa:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:SERVice:DATa:VALue?
Info
  • <QString> is the binary Service Data value to be used when searching on an EtherCAT bus signal. The default size and value of Service Data is 8 bits and ‘XXXXXXXX’ respectively.

SearchSearchItemTriggerABusEthercatSourceaddress

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:SOURCEADDRess command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:SOURCEADDRess? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:SOURCEADDRess? query and raise an AssertionError if the returned value does not match value.
Properties
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:SOURCEADDRess:VALue command.

value property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:SOURCEADDRess:VALue command.

Description
  • This command sets the binary MAC source address value to be used for EtherCAT bus. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:SOURCEADDRess:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:SOURCEADDRess:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:SOURCEADDRess:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:SOURCEADDRess:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:SOURCEADDRess:VALue?
Info
  • <QString> is the binary MAC source address value to be used when searching on an EtherCAT bus signal. The default size and value of MAC Source Address is 48 bits and ‘XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXXXXXXXXXX XXXXXXXX’ respectively.

SearchSearchItemTriggerABusEthercatSourceaddressValue

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:SOURCEADDRess:VALue command.

Description
  • This command sets the binary MAC source address value to be used for EtherCAT bus. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:SOURCEADDRess:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:SOURCEADDRess:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:SOURCEADDRess:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:SOURCEADDRess:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:SOURCEADDRess:VALue?
Info
  • <QString> is the binary MAC source address value to be used when searching on an EtherCAT bus signal. The default size and value of MAC Source Address is 48 bits and ‘XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXXXXXXXXXX XXXXXXXX’ respectively.

SearchSearchItemTriggerABusEthercatSrc

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:SRC command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:SRC? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:SRC? query and raise an AssertionError if the returned value does not match value.
Properties
  • .port: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:SRC:PORT command tree.

port property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:SRC:PORT command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:SRC:PORT? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:SRC:PORT? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:SRC:PORT:VALue command.

SearchSearchItemTriggerABusEthercatSrcPort

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:SRC:PORT command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:SRC:PORT? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:SRC:PORT? query and raise an AssertionError if the returned value does not match value.
Properties
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:SRC:PORT:VALue command.

value property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:SRC:PORT:VALue command.

Description
  • This command sets the UDP Source port to be used for EtherCAT bus. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:SRC:PORT:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:SRC:PORT:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:SRC:PORT:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:SRC:PORT:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:SRC:PORT:VALue?
Info
  • <QString> is the binary Source Port value to be used when searching on an EtherCAT bus signal. The default size and value of Source Port is 16 bits and ‘XXXXXXXX XXXXXXXX’ respectively.

SearchSearchItemTriggerABusEthercatSrcPortValue

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:SRC:PORT:VALue command.

Description
  • This command sets the UDP Source port to be used for EtherCAT bus. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:SRC:PORT:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:SRC:PORT:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:SRC:PORT:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:SRC:PORT:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:SRC:PORT:VALue?
Info
  • <QString> is the binary Source Port value to be used when searching on an EtherCAT bus signal. The default size and value of Source Port is 16 bits and ‘XXXXXXXX XXXXXXXX’ respectively.

SearchSearchItemTriggerABusEthercatTci

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:TCI command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:TCI? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:TCI? query and raise an AssertionError if the returned value does not match value.
Properties
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:TCI:VALue command.

value property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:TCI:VALue command.

Description
  • This command sets the binary Tag control Information to be used for EtherCAT bus. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:TCI:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:TCI:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:TCI:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:TCI:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:TCI:VALue?
Info
  • <QString> is the binary TCI value to be used when searching on an EtherCAT bus signal. The default size and value of TCI is 16 bits and ‘XXXXXXXXXXXXXXXX’ respectively.

SearchSearchItemTriggerABusEthercatTciValue

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:TCI:VALue command.

Description
  • This command sets the binary Tag control Information to be used for EtherCAT bus. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:TCI:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:TCI:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:TCI:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:TCI:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:TCI:VALue?
Info
  • <QString> is the binary TCI value to be used when searching on an EtherCAT bus signal. The default size and value of TCI is 16 bits and ‘XXXXXXXXXXXXXXXX’ respectively.

SearchSearchItemTriggerABusEthercatWkc

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:WKC command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:WKC? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:WKC? query and raise an AssertionError if the returned value does not match value.
Properties
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:WKC:VALue command.

value property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:WKC:VALue command.

Description
  • This command sets the binary Working Counter information to be used for EtherCAT bus. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:WKC:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:WKC:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:WKC:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:WKC:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:WKC:VALue?
Info
  • <QString> is the binary Working Counter information value to be used when searching on an EtherCAT bus signal. The default size and value of Working Counter information is 16 bits and ‘XXXXXXXX XXXXXXXX’ respectively.

SearchSearchItemTriggerABusEthercatWkcValue

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:WKC:VALue command.

Description
  • This command sets the binary Working Counter information to be used for EtherCAT bus. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:WKC:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:WKC:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:WKC:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:WKC:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:WKC:VALue?
Info
  • <QString> is the binary Working Counter information value to be used when searching on an EtherCAT bus signal. The default size and value of Working Counter information is 16 bits and ‘XXXXXXXX XXXXXXXX’ respectively.

SearchSearchItemTriggerABusEthernet

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet? query and raise an AssertionError if the returned value does not match value.
Properties
  • .condition: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:CONDition command.
  • .data: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:DATa command tree.
  • .ipheader: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:IPHeader command tree.
  • .mac: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC command tree.
  • .qtag: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:QTAG command tree.
  • .tcpheader: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader command tree.

condition property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:CONDition command.

Description
  • This command specifies a field or condition for an Ethernet bus to search on. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:CONDition? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:CONDition? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:CONDition value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:CONDition {SFD|MACADDRess|MACLENgth|IPHeader|TCPHeader|DATa|EOP|IDLe|FCSError|QTAG}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:CONDition?
Info
  • SFD - Start of frame delimiter.
  • MACADDRess - MAC addresses field.
  • MACLENgth - MAC length/type field.
  • IPHeader - IP header field.
  • TCPHeader - TCP header field.
  • DATa - TCP/IPv4 or MAC protocol client data field.
  • EOP - End of Packet field.
  • IDLe - Idle field.
  • FCSError - Frame Check Sequence Error (CRC) field.
  • QTAG - IEEE 802.1Q (VLAN) control information field.

data property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:DATa command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:DATa? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:DATa? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .hivalue: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:DATa:HIVALue command.
  • .offset: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:DATa:OFFSet command.
  • .qualifier: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:DATa:QUALifier command.
  • .size: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:DATa:SIZe command.
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:DATa:VALue command.

ipheader property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:IPHeader command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:IPHeader? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:IPHeader? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .destinationaddr: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:IPHeader:DESTinationaddr command tree.
  • .protocol: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:IPHeader:PROTOcol command tree.
  • .sourceaddr: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:IPHeader:SOUrceaddr command tree.

mac property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .address: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:ADDRess command tree.
  • .length: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:LENgth command tree.

qtag property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:QTAG command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:QTAG? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:QTAG? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:QTAG:VALue command.

tcpheader property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .acknum: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:ACKnum command tree.
  • .destinationport: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:DESTinationport command tree.
  • .seqnum: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:SEQnum command tree.
  • .sourceport: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:SOUrceport command tree.

SearchSearchItemTriggerABusEthernetCondition

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:CONDition command.

Description
  • This command specifies a field or condition for an Ethernet bus to search on. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:CONDition? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:CONDition? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:CONDition value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:CONDition {SFD|MACADDRess|MACLENgth|IPHeader|TCPHeader|DATa|EOP|IDLe|FCSError|QTAG}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:CONDition?
Info
  • SFD - Start of frame delimiter.
  • MACADDRess - MAC addresses field.
  • MACLENgth - MAC length/type field.
  • IPHeader - IP header field.
  • TCPHeader - TCP header field.
  • DATa - TCP/IPv4 or MAC protocol client data field.
  • EOP - End of Packet field.
  • IDLe - Idle field.
  • FCSError - Frame Check Sequence Error (CRC) field.
  • QTAG - IEEE 802.1Q (VLAN) control information field.

SearchSearchItemTriggerABusEthernetData

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:DATa command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:DATa? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:DATa? query and raise an AssertionError if the returned value does not match value.
Properties
  • .hivalue: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:DATa:HIVALue command.
  • .offset: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:DATa:OFFSet command.
  • .qualifier: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:DATa:QUALifier command.
  • .size: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:DATa:SIZe command.
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:DATa:VALue command.

hivalue property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:DATa:HIVALue command.

Description
  • This command sets or queries the binary data value to be used when searching on an Ethernet bus signal. The search condition must be set to DATA and the data qualifier to inside or outside range. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:DATa:HIVALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:DATa:HIVALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:DATa:HIVALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:DATa:HIVALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:DATa:HIVALue?
Info
  • <QString> is the binary data value to be used when searching on an Ethernet bus signal.

offset property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:DATa:OFFSet command.

Description
  • This command specifies the data offset value, in bytes, to use when searching on the Ethernet data field. The search condition needs to be set to DATa. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:DATa:OFFSet? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:DATa:OFFSet? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:DATa:OFFSet value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:DATa:OFFSet <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:DATa:OFFSet?
Info
  • <NR1> is an integer whose minimum and default values are -1 (don’t care) and maximum is 1,499.

qualifier property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:DATa:QUALifier command.

Description
  • This command specifies the qualifier to be used when searching on an Ethernet bus signal. The search condition must be set to DATa. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:DATa:QUALifier? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:DATa:QUALifier? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:DATa:QUALifier value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:DATa:QUALifier {LESSthan|MOREthan|EQual|UNEQual|LESSEQual|MOREEQual|INrange|OUTrange}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:DATa:QUALifier?
Info
  • LESSthan sets the qualifier to less than.
  • MOREthan sets the qualifier to greater than.
  • EQual sets the qualifier to equal.
  • UNEQual sets the qualifier to not equal.
  • LESSEQual sets the qualifier to less than or equal.
  • MOREEQual sets the qualifier to greater than or equal.
  • INrange sets the qualifier to in range.
  • OUTrange sets the qualifier to out of range.

size property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:DATa:SIZe command.

Description
  • This command specifies the length of the data string, in bytes, to use when searching on the Ethernet bus signal. The search condition needs to be set to DATa. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:DATa:SIZe? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:DATa:SIZe? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:DATa:SIZe value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:DATa:SIZe <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:DATa:SIZe?
Info
  • <NR1> specifies the length of the data string, in bytes. The minimum and default values are 1, and the maximum value is 16.

value property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:DATa:VALue command.

Description
  • This command specifies the binary value to use when searching on the Ethernet bus signal. The search condition needs to be set to DATa. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:DATa:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:DATa:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:DATa:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:DATa:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:DATa:VALue?
Info
  • <QString> is a quoted string where the allowable characters are 0, 1, and X. The allowable number of characters depends on the setting for size (using SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:DATa:SIZe). The bits specified in the quoted string replace the least significant bits, leaving any unspecified upper bits unchanged.

SearchSearchItemTriggerABusEthernetDataHivalue

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:DATa:HIVALue command.

Description
  • This command sets or queries the binary data value to be used when searching on an Ethernet bus signal. The search condition must be set to DATA and the data qualifier to inside or outside range. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:DATa:HIVALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:DATa:HIVALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:DATa:HIVALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:DATa:HIVALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:DATa:HIVALue?
Info
  • <QString> is the binary data value to be used when searching on an Ethernet bus signal.

SearchSearchItemTriggerABusEthernetDataOffset

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:DATa:OFFSet command.

Description
  • This command specifies the data offset value, in bytes, to use when searching on the Ethernet data field. The search condition needs to be set to DATa. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:DATa:OFFSet? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:DATa:OFFSet? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:DATa:OFFSet value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:DATa:OFFSet <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:DATa:OFFSet?
Info
  • <NR1> is an integer whose minimum and default values are -1 (don’t care) and maximum is 1,499.

SearchSearchItemTriggerABusEthernetDataQualifier

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:DATa:QUALifier command.

Description
  • This command specifies the qualifier to be used when searching on an Ethernet bus signal. The search condition must be set to DATa. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:DATa:QUALifier? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:DATa:QUALifier? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:DATa:QUALifier value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:DATa:QUALifier {LESSthan|MOREthan|EQual|UNEQual|LESSEQual|MOREEQual|INrange|OUTrange}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:DATa:QUALifier?
Info
  • LESSthan sets the qualifier to less than.
  • MOREthan sets the qualifier to greater than.
  • EQual sets the qualifier to equal.
  • UNEQual sets the qualifier to not equal.
  • LESSEQual sets the qualifier to less than or equal.
  • MOREEQual sets the qualifier to greater than or equal.
  • INrange sets the qualifier to in range.
  • OUTrange sets the qualifier to out of range.

SearchSearchItemTriggerABusEthernetDataSize

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:DATa:SIZe command.

Description
  • This command specifies the length of the data string, in bytes, to use when searching on the Ethernet bus signal. The search condition needs to be set to DATa. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:DATa:SIZe? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:DATa:SIZe? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:DATa:SIZe value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:DATa:SIZe <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:DATa:SIZe?
Info
  • <NR1> specifies the length of the data string, in bytes. The minimum and default values are 1, and the maximum value is 16.

SearchSearchItemTriggerABusEthernetDataValue

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:DATa:VALue command.

Description
  • This command specifies the binary value to use when searching on the Ethernet bus signal. The search condition needs to be set to DATa. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:DATa:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:DATa:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:DATa:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:DATa:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:DATa:VALue?
Info
  • <QString> is a quoted string where the allowable characters are 0, 1, and X. The allowable number of characters depends on the setting for size (using SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:DATa:SIZe). The bits specified in the quoted string replace the least significant bits, leaving any unspecified upper bits unchanged.

SearchSearchItemTriggerABusEthernetIpheader

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:IPHeader command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:IPHeader? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:IPHeader? query and raise an AssertionError if the returned value does not match value.
Properties
  • .destinationaddr: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:IPHeader:DESTinationaddr command tree.
  • .protocol: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:IPHeader:PROTOcol command tree.
  • .sourceaddr: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:IPHeader:SOUrceaddr command tree.

destinationaddr property

SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:IPHeader:DESTinationaddr command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:IPHeader:DESTinationaddr? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:IPHeader:DESTinationaddr? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:IPHeader:DESTinationaddr:VALue command.

protocol property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:IPHeader:PROTOcol command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:IPHeader:PROTOcol? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:IPHeader:PROTOcol? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:IPHeader:PROTOcol:VALue command.

sourceaddr property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:IPHeader:SOUrceaddr command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:IPHeader:SOUrceaddr? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:IPHeader:SOUrceaddr? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:IPHeader:SOUrceaddr:VALue command.

SearchSearchItemTriggerABusEthernetIpheaderDestinationaddr

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:IPHeader:DESTinationaddr command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:IPHeader:DESTinationaddr? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:IPHeader:DESTinationaddr? query and raise an AssertionError if the returned value does not match value.
Properties
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:IPHeader:DESTinationaddr:VALue command.

value property

SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:IPHeader:DESTinationaddr:VALue command.

Description
  • This command specifies the binary destination address value to use when searching on an Ethernet bus signal. The search condition needs to be set to IPHeader. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:IPHeader:DESTinationaddr:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:IPHeader:DESTinationaddr:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:IPHeader:DESTinationaddr:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:IPHeader:DESTinationaddr:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:IPHeader:DESTinationaddr:VALue?
Info
  • <QString> is a quoted string of up to 32 characters where the allowable characters are 0, 1, and X. The bits specified in the quoted string replace the least significant bits, leaving any unspecified upper bits unchanged.

SearchSearchItemTriggerABusEthernetIpheaderDestinationaddrValue

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:IPHeader:DESTinationaddr:VALue command.

Description
  • This command specifies the binary destination address value to use when searching on an Ethernet bus signal. The search condition needs to be set to IPHeader. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:IPHeader:DESTinationaddr:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:IPHeader:DESTinationaddr:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:IPHeader:DESTinationaddr:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:IPHeader:DESTinationaddr:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:IPHeader:DESTinationaddr:VALue?
Info
  • <QString> is a quoted string of up to 32 characters where the allowable characters are 0, 1, and X. The bits specified in the quoted string replace the least significant bits, leaving any unspecified upper bits unchanged.

SearchSearchItemTriggerABusEthernetIpheaderProtocol

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:IPHeader:PROTOcol command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:IPHeader:PROTOcol? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:IPHeader:PROTOcol? query and raise an AssertionError if the returned value does not match value.
Properties
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:IPHeader:PROTOcol:VALue command.

value property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:IPHeader:PROTOcol:VALue command.

Description
  • This command specifies the binary protocol value to use when searching on the Ethernet bus signal. The search condition needs to be set to IPHeader. The search number is specified by x. Note: Commonly used protocol values are 1 (ICMP), 2 (IGMP), 6 (TCP) and 17 (UDP).
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:IPHeader:PROTOcol:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:IPHeader:PROTOcol:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:IPHeader:PROTOcol:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:IPHeader:PROTOcol:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:IPHeader:PROTOcol:VALue?
Info
  • <QString> is a quoted string of up to 8 characters where the allowable characters are 0, 1, and X. The bits specified in the quoted string replace the least significant bits, leaving any unspecified upper bits unchanged.

SearchSearchItemTriggerABusEthernetIpheaderProtocolValue

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:IPHeader:PROTOcol:VALue command.

Description
  • This command specifies the binary protocol value to use when searching on the Ethernet bus signal. The search condition needs to be set to IPHeader. The search number is specified by x. Note: Commonly used protocol values are 1 (ICMP), 2 (IGMP), 6 (TCP) and 17 (UDP).
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:IPHeader:PROTOcol:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:IPHeader:PROTOcol:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:IPHeader:PROTOcol:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:IPHeader:PROTOcol:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:IPHeader:PROTOcol:VALue?
Info
  • <QString> is a quoted string of up to 8 characters where the allowable characters are 0, 1, and X. The bits specified in the quoted string replace the least significant bits, leaving any unspecified upper bits unchanged.

SearchSearchItemTriggerABusEthernetIpheaderSourceaddr

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:IPHeader:SOUrceaddr command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:IPHeader:SOUrceaddr? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:IPHeader:SOUrceaddr? query and raise an AssertionError if the returned value does not match value.
Properties
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:IPHeader:SOUrceaddr:VALue command.

value property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:IPHeader:SOUrceaddr:VALue command.

Description
  • This command specifies the binary source address value to use when searching on an Ethernet bus signal. The search condition needs to be set to IPHeader. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:IPHeader:SOUrceaddr:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:IPHeader:SOUrceaddr:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:IPHeader:SOUrceaddr:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:IPHeader:SOUrceaddr:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:IPHeader:SOUrceaddr:VALue?
Info
  • <QString> is a quoted string of up to 32 characters where the allowable characters are 0, 1, and X. The bits specified in the quoted string replace the least significant bits, leaving any unspecified upper bits unchanged.

SearchSearchItemTriggerABusEthernetIpheaderSourceaddrValue

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:IPHeader:SOUrceaddr:VALue command.

Description
  • This command specifies the binary source address value to use when searching on an Ethernet bus signal. The search condition needs to be set to IPHeader. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:IPHeader:SOUrceaddr:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:IPHeader:SOUrceaddr:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:IPHeader:SOUrceaddr:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:IPHeader:SOUrceaddr:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:IPHeader:SOUrceaddr:VALue?
Info
  • <QString> is a quoted string of up to 32 characters where the allowable characters are 0, 1, and X. The bits specified in the quoted string replace the least significant bits, leaving any unspecified upper bits unchanged.

SearchSearchItemTriggerABusEthernetMac

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC? query and raise an AssertionError if the returned value does not match value.
Properties
  • .address: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:ADDRess command tree.
  • .length: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:LENgth command tree.

address property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:ADDRess command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:ADDRess? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:ADDRess? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .destination: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:ADDRess:DESTination command tree.
  • .source: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:ADDRess:SOUrce command tree.

length property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:LENgth command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:LENgth? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:LENgth? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .hivalue: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:LENgth:HIVALue command.
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:LENgth:VALue command.

SearchSearchItemTriggerABusEthernetMacAddress

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:ADDRess command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:ADDRess? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:ADDRess? query and raise an AssertionError if the returned value does not match value.
Properties
  • .destination: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:ADDRess:DESTination command tree.
  • .source: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:ADDRess:SOUrce command tree.

destination property

SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:ADDRess:DESTination command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:ADDRess:DESTination? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:ADDRess:DESTination? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:ADDRess:DESTination:VALue command.

source property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:ADDRess:SOUrce command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:ADDRess:SOUrce? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:ADDRess:SOUrce? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:ADDRess:SOUrce:VALue command.

SearchSearchItemTriggerABusEthernetMacAddressDestination

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:ADDRess:DESTination command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:ADDRess:DESTination? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:ADDRess:DESTination? query and raise an AssertionError if the returned value does not match value.
Properties
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:ADDRess:DESTination:VALue command.

value property

SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:ADDRess:DESTination:VALue command.

Description
  • This command specifies the binary MAC address destination value to use when searching on an Ethernet bus signal. The search condition needs to be set to MACADDRess. The search number is specified by x. Note: MAC Addresses are 48-bit values such as 08:00:11:1E:C9:AE hex.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:ADDRess:DESTination:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:ADDRess:DESTination:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:ADDRess:DESTination:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:ADDRess:DESTination:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:ADDRess:DESTination:VALue?
Info
  • <QString> is a quoted string of up to 48 characters where the allowable characters are 0, 1, and X. The bits specified in the quoted string replace the least significant bits, leaving any unspecified upper bits unchanged.

SearchSearchItemTriggerABusEthernetMacAddressDestinationValue

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:ADDRess:DESTination:VALue command.

Description
  • This command specifies the binary MAC address destination value to use when searching on an Ethernet bus signal. The search condition needs to be set to MACADDRess. The search number is specified by x. Note: MAC Addresses are 48-bit values such as 08:00:11:1E:C9:AE hex.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:ADDRess:DESTination:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:ADDRess:DESTination:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:ADDRess:DESTination:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:ADDRess:DESTination:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:ADDRess:DESTination:VALue?
Info
  • <QString> is a quoted string of up to 48 characters where the allowable characters are 0, 1, and X. The bits specified in the quoted string replace the least significant bits, leaving any unspecified upper bits unchanged.

SearchSearchItemTriggerABusEthernetMacAddressSource

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:ADDRess:SOUrce command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:ADDRess:SOUrce? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:ADDRess:SOUrce? query and raise an AssertionError if the returned value does not match value.
Properties
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:ADDRess:SOUrce:VALue command.

value property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:ADDRess:SOUrce:VALue command.

Description
  • This command specifies the binary MAC address source value to use when searching on an Ethernet bus signal. The search condition needs to be set to MACADDRess. The search number is specified by x. Note: MAC Addresses are 48-bit values such as 08:00:11:1E:C9:AE hex.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:ADDRess:SOUrce:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:ADDRess:SOUrce:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:ADDRess:SOUrce:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:ADDRess:SOUrce:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:ADDRess:SOUrce:VALue?
Info
  • <QString> is a quoted string of up to 48 characters where the allowable characters are 0, 1, and X. The bits specified in the quoted string replace the least significant bits, leaving any unspecified upper bits unchanged.

SearchSearchItemTriggerABusEthernetMacAddressSourceValue

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:ADDRess:SOUrce:VALue command.

Description
  • This command specifies the binary MAC address source value to use when searching on an Ethernet bus signal. The search condition needs to be set to MACADDRess. The search number is specified by x. Note: MAC Addresses are 48-bit values such as 08:00:11:1E:C9:AE hex.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:ADDRess:SOUrce:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:ADDRess:SOUrce:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:ADDRess:SOUrce:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:ADDRess:SOUrce:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:ADDRess:SOUrce:VALue?
Info
  • <QString> is a quoted string of up to 48 characters where the allowable characters are 0, 1, and X. The bits specified in the quoted string replace the least significant bits, leaving any unspecified upper bits unchanged.

SearchSearchItemTriggerABusEthernetMacLength

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:LENgth command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:LENgth? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:LENgth? query and raise an AssertionError if the returned value does not match value.
Properties
  • .hivalue: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:LENgth:HIVALue command.
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:LENgth:VALue command.

hivalue property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:LENgth:HIVALue command.

Description
  • This command specifies the binary MAC length high value to use when searching on an Ethernet bus signal. The search condition needs to be set to MACADDRess. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:LENgth:HIVALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:LENgth:HIVALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:LENgth:HIVALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:LENgth:HIVALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:LENgth:HIVALue?
Info
  • <QString> is a quoted string of up to 16 characters where the allowable characters are 0, 1, and X. The bits specified in the quoted string replace the least significant bits, leaving any unspecified upper bits unchanged.

value property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:LENgth:VALue command.

Description
  • This command specifies the MAC length value to use when searching on an Ethernet bus signal. The search condition needs to be set to MACADDRess. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:LENgth:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:LENgth:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:LENgth:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:LENgth:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:LENgth:VALue?
Info
  • <QString> is a quoted string of up to 16 characters where the allowable characters are 0, 1, and X. The bits specified in the quoted string replace the least significant bits, leaving any unspecified upper bits unchanged.

SearchSearchItemTriggerABusEthernetMacLengthHivalue

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:LENgth:HIVALue command.

Description
  • This command specifies the binary MAC length high value to use when searching on an Ethernet bus signal. The search condition needs to be set to MACADDRess. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:LENgth:HIVALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:LENgth:HIVALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:LENgth:HIVALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:LENgth:HIVALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:LENgth:HIVALue?
Info
  • <QString> is a quoted string of up to 16 characters where the allowable characters are 0, 1, and X. The bits specified in the quoted string replace the least significant bits, leaving any unspecified upper bits unchanged.

SearchSearchItemTriggerABusEthernetMacLengthValue

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:LENgth:VALue command.

Description
  • This command specifies the MAC length value to use when searching on an Ethernet bus signal. The search condition needs to be set to MACADDRess. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:LENgth:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:LENgth:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:LENgth:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:LENgth:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:LENgth:VALue?
Info
  • <QString> is a quoted string of up to 16 characters where the allowable characters are 0, 1, and X. The bits specified in the quoted string replace the least significant bits, leaving any unspecified upper bits unchanged.

SearchSearchItemTriggerABusEthernetQtag

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:QTAG command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:QTAG? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:QTAG? query and raise an AssertionError if the returned value does not match value.
Properties
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:QTAG:VALue command.

value property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:QTAG:VALue command.

Description
  • This command specifies the binary Q-tag information to use when searching on an Ethernet bus signal. The search condition needs to be set to QTAG. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:QTAG:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:QTAG:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:QTAG:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:QTAG:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:QTAG:VALue?
Info
  • <QString> is a quoted string of up to 32 characters where the allowable characters are 0, 1, and X. The bits specified in the quoted string replace the least significant bits, leaving any unspecified upper bits unchanged.

SearchSearchItemTriggerABusEthernetQtagValue

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:QTAG:VALue command.

Description
  • This command specifies the binary Q-tag information to use when searching on an Ethernet bus signal. The search condition needs to be set to QTAG. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:QTAG:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:QTAG:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:QTAG:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:QTAG:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:QTAG:VALue?
Info
  • <QString> is a quoted string of up to 32 characters where the allowable characters are 0, 1, and X. The bits specified in the quoted string replace the least significant bits, leaving any unspecified upper bits unchanged.

SearchSearchItemTriggerABusEthernetTcpheader

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader? query and raise an AssertionError if the returned value does not match value.
Properties
  • .acknum: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:ACKnum command tree.
  • .destinationport: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:DESTinationport command tree.
  • .seqnum: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:SEQnum command tree.
  • .sourceport: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:SOUrceport command tree.

acknum property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:ACKnum command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:ACKnum? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:ACKnum? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:ACKnum:VALue command.

destinationport property

SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:DESTinationport command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:DESTinationport? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:DESTinationport? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:DESTinationport:VALue command.

seqnum property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:SEQnum command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:SEQnum? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:SEQnum? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:SEQnum:VALue command.

sourceport property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:SOUrceport command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:SOUrceport? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:SOUrceport? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:SOUrceport:VALue command.

SearchSearchItemTriggerABusEthernetTcpheaderAcknum

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:ACKnum command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:ACKnum? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:ACKnum? query and raise an AssertionError if the returned value does not match value.
Properties
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:ACKnum:VALue command.

value property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:ACKnum:VALue command.

Description
  • This command specifies the binary ack number value to use when searching on an Ethernet bus signal. The default is all X’s (don’t care). The search condition needs to be set to TCPHeader. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:ACKnum:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:ACKnum:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:ACKnum:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:ACKnum:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:ACKnum:VALue?
Info
  • <QString> is a quoted string of up to 32 characters where the allowable characters are 0, 1, and X. The bits specified in the quoted string replace the least significant bits, leaving any unspecified upper bits unchanged.

SearchSearchItemTriggerABusEthernetTcpheaderAcknumValue

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:ACKnum:VALue command.

Description
  • This command specifies the binary ack number value to use when searching on an Ethernet bus signal. The default is all X’s (don’t care). The search condition needs to be set to TCPHeader. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:ACKnum:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:ACKnum:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:ACKnum:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:ACKnum:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:ACKnum:VALue?
Info
  • <QString> is a quoted string of up to 32 characters where the allowable characters are 0, 1, and X. The bits specified in the quoted string replace the least significant bits, leaving any unspecified upper bits unchanged.

SearchSearchItemTriggerABusEthernetTcpheaderDestinationport

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:DESTinationport command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:DESTinationport? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:DESTinationport? query and raise an AssertionError if the returned value does not match value.
Properties
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:DESTinationport:VALue command.

value property

SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:DESTinationport:VALue command.

Description
  • This command specifies the binary destination port value to use when searching on the Ethernet TCP header destination port number. The search condition needs to be set to TCPHeader. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:DESTinationport:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:DESTinationport:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:DESTinationport:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:DESTinationport:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:DESTinationport:VALue?
Info
  • <QString> is a quoted string of up to 16 characters where the allowable characters are 0, 1, and X. The bits specified in the quoted string replace the least significant bits, leaving any unspecified upper bits unchanged.

SearchSearchItemTriggerABusEthernetTcpheaderDestinationportValue

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:DESTinationport:VALue command.

Description
  • This command specifies the binary destination port value to use when searching on the Ethernet TCP header destination port number. The search condition needs to be set to TCPHeader. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:DESTinationport:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:DESTinationport:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:DESTinationport:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:DESTinationport:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:DESTinationport:VALue?
Info
  • <QString> is a quoted string of up to 16 characters where the allowable characters are 0, 1, and X. The bits specified in the quoted string replace the least significant bits, leaving any unspecified upper bits unchanged.

SearchSearchItemTriggerABusEthernetTcpheaderSeqnum

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:SEQnum command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:SEQnum? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:SEQnum? query and raise an AssertionError if the returned value does not match value.
Properties
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:SEQnum:VALue command.

value property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:SEQnum:VALue command.

Description
  • This command specifies the binary sequence number value to use when searching on an Ethernet bus signal. The default is all X’s (don’t care). The search condition needs to be set to TCPHeader. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:SEQnum:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:SEQnum:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:SEQnum:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:SEQnum:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:SEQnum:VALue?
Info
  • <QString> is a quoted string of up to 32 characters where the allowable characters are 0, 1, and X. The bits specified in the quoted string replace the least significant bits, leaving any unspecified upper bits unchanged.

SearchSearchItemTriggerABusEthernetTcpheaderSeqnumValue

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:SEQnum:VALue command.

Description
  • This command specifies the binary sequence number value to use when searching on an Ethernet bus signal. The default is all X’s (don’t care). The search condition needs to be set to TCPHeader. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:SEQnum:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:SEQnum:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:SEQnum:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:SEQnum:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:SEQnum:VALue?
Info
  • <QString> is a quoted string of up to 32 characters where the allowable characters are 0, 1, and X. The bits specified in the quoted string replace the least significant bits, leaving any unspecified upper bits unchanged.

SearchSearchItemTriggerABusEthernetTcpheaderSourceport

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:SOUrceport command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:SOUrceport? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:SOUrceport? query and raise an AssertionError if the returned value does not match value.
Properties
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:SOUrceport:VALue command.

value property

SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:SOUrceport:VALue command.

Description
  • This command specifies the binary source port value to use when searching on an Ethernet bus signal. The search condition needs to be set to TCPHeader. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:SOUrceport:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:SOUrceport:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:SOUrceport:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:SOUrceport:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:SOUrceport:VALue?
Info
  • <QString> is a quoted string of up to 16 characters where the allowable characters are 0, 1, and X. The bits specified in the quoted string replace the least significant bits, leaving any unspecified upper bits unchanged.

SearchSearchItemTriggerABusEthernetTcpheaderSourceportValue

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:SOUrceport:VALue command.

Description
  • This command specifies the binary source port value to use when searching on an Ethernet bus signal. The search condition needs to be set to TCPHeader. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:SOUrceport:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:SOUrceport:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:SOUrceport:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:SOUrceport:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:SOUrceport:VALue?
Info
  • <QString> is a quoted string of up to 16 characters where the allowable characters are 0, 1, and X. The bits specified in the quoted string replace the least significant bits, leaving any unspecified upper bits unchanged.

SearchSearchItemTriggerABusEusb

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB? query and raise an AssertionError if the returned value does not match value.
Properties
  • .address: The SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:ADDress command tree.
  • .condition: The SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:CONDition command.
  • .databits: The SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:DATABITS command tree.
  • .data: The SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:DATa command tree.
  • .endpoint: The SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:ENDPoint command tree.
  • .endsearch: The SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:ENDSEARch command.
  • .eop: The SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:EOP command tree.
  • .eopbits: The SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:EOPBITS command tree.
  • .errtype: The SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:ERRType command.
  • .handshaketype: The SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:HANDSHAKEType command.
  • .rap: The SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:RAP command tree.
  • .sofframenumber: The SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SOFFRAMENUMber command.
  • .specialtype: The SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPECIALType command.
  • .split: The SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPLit command tree.
  • .sync: The SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SYNC command tree.
  • .syncbits: The SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SYNCBITS command tree.
  • .syncsearch: The SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SYNCSEARch command.
  • .tokentype: The SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:TOKENType command.

address property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:ADDress command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:ADDress? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:ADDress? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .hivalue: The SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:ADDress:HIVALue command.
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:ADDress:VALue command.

condition property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:CONDition command.

Description
  • This command sets or queries the search type for the specified search. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:CONDition? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:CONDition? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:CONDition value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:CONDition {SYNC|HANDSHAKEPacket|SPECIALPacket|ERRor|TOKENPacket|DATAPacket|RESET|CONNect|CONTROLMESSage|SUSPEND|DEVICEChirp|HOSTChirp|PORTReset|PORTConfiguration|RESUME|RAP|EOP}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:CONDition?
Info
  • SYNC specifies the search condition as Sync.
  • HANDSHAKEPacket specifies the search condition as Handshake Packet.
  • SPECIALPacket specifies the search condition as Special Packet.
  • ERRor specifies the search condition as Error.
  • TOKENPacket specifies the search condition as Token (Address) Packet.
  • DATAPacket specifies the search condition as Data Packet.
  • RESET specifies the search condition as Reset.
  • CONNect specifies the search condition as connect.
  • CONTROLMESSage specifies the search condition as Control Message.
  • SUSPEND specifies the search condition as Suspend.
  • DEVICEChirp specifies the search condition as Device chirp.
  • HOSTChirp specifies the search condition as Host Chirp.
  • PORTReset specifies the search condition as Port Reset.
  • PORTConfiguration specifies the search condition as Port Configuration.
  • RESUME specifies the search condition as Resume.
  • RAP specifies the search condition as Register Access Protocol.
  • EOP specifies the search condition as End of Packet.

data property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:DATa command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:DATa? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:DATa? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .hivalue: The SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:DATa:HIVALue command.
  • .offset: The SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:DATa:OFFSet command.
  • .qualifier: The SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:DATa:QUAlifier command.
  • .size: The SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:DATa:SIZe command.
  • .type: The SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:DATa:TYPe command.
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:DATa:VALue command.

databits property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:DATABITS command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:DATABITS? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:DATABITS? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .size: The SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:DATABITS:SIZe command.

endpoint property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:ENDPoint command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:ENDPoint? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:ENDPoint? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:ENDPoint:VALue command.

endsearch property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:ENDSEARch command.

Description
  • This command specifies eUSB Search EOP Bits to be On and Off. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:ENDSEARch? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:ENDSEARch? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:ENDSEARch value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:ENDSEARch {OFF|ON}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:ENDSEARch?
Info
  • OFF specifies the EOP bits as OFF (for Low Speed and Full Speed).
  • ON specifies the EOP bits as ON (for High Speed).

eop property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:EOP command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:EOP? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:EOP? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .databits: The SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:EOP:DATABITS command tree.
  • .qualifier: The SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:EOP:QUAlifier command.

eopbits property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:EOPBITS command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:EOPBITS? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:EOPBITS? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .max: The SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:EOPBITS:MAX command tree.
  • .min: The SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:EOPBITS:MIN command tree.

errtype property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:ERRType command.

Description
  • This command specifies the eUSB trigger type to be valid on a PID, Token CRC5, Data CRC16, or Bit stuffing condition. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:ERRType? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:ERRType? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:ERRType value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:ERRType {BITSTUFFing|CRC5|CRC16|PID}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:ERRType?
Info
  • BITSTUFFing specifies the error type as Bit Stuffing.
  • CRC5 specifies the error type as Token CRC5 (Cyclic Redundancy Check 5).
  • CRC16 specifies the error type as Data CRC16 (Cyclic Redundancy Check 16).
  • PID specifies the error type as PID Check Bits.

handshaketype property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:HANDSHAKEType command.

Description
  • This command specifies the eUSB trigger type to be valid on any, ack, nak, stall, or nyet condition. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:HANDSHAKEType? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:HANDSHAKEType? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:HANDSHAKEType value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:HANDSHAKEType {ANY|ACK|NAK|STALL|NYET}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:HANDSHAKEType?
Info
  • ANY specifies the handshake type as Any (0010).
  • ACK specifies the handshake type as Acknowledgement (positive) (XX10).
  • NAK specifies the handshake type as Negative Acknowledgment (1010).
  • STALL specifies the error type as PID Check Bits.
  • NYET specifies the handshake type as Stall (endpoint is halted or control pipe request not supported) (1110).

rap property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:RAP command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:RAP? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:RAP? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .address: The SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:RAP:ADDress command tree.
  • .command: The SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:RAP:COMMand command.
  • .data: The SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:RAP:DATa command tree.
  • .option: The SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:RAP:OPTion command.

sofframenumber property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SOFFRAMENUMber command.

Description
  • This command sets the binary frame number to be used when triggering on a eUSB bus signal. The trigger condition must be set to TOKEN. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SOFFRAMENUMber? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SOFFRAMENUMber? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SOFFRAMENUMber value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SOFFRAMENUMber <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SOFFRAMENUMber?
Info
  • <QString> specifies the binary frame number within the range 000 0000 0000 to 111 1111 1111 (000 hex to 7FF hex).

specialtype property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPECIALType command.

Description
  • This command specifies the eUSB trigger type to be valid on any, err, split, ping, or reserved condition. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPECIALType? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPECIALType? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPECIALType value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPECIALType {ANY|PREamble|ERROr|SPLit|PING|RESERVed}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPECIALType?
Info
  • ANY specifies the PID value as Any (XX00).
  • PREamble specifies the PID value as PRE (1100).
  • ERROr specifies the PID value as ERR (1100).
  • SPLit specifies the PID value as Split (1000).
  • PING specifies the PID value as PING (0100).
  • RESERVed specifies the PID value as Reserved (0000).

split property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPLit command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPLit? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPLit? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .et: The SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPLit:ET command tree.
  • .hub: The SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPLit:HUB command tree.
  • .port: The SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPLit:PORT command tree.
  • .sc: The SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPLit:SC command tree.
  • .se: The SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPLit:SE command tree.

sync property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SYNC command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SYNC? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SYNC? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .qualifier: The SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SYNC:QUAlifier command.

syncbits property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SYNCBITS command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SYNCBITS? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SYNCBITS? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .max: The SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SYNCBITS:MAX command tree.
  • .min: The SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SYNCBITS:MIN command tree.

syncsearch property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SYNCSEARch command.

Description
  • This command specifies eUSB Search Sync Bits to be On and Off. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SYNCSEARch? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SYNCSEARch? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SYNCSEARch value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SYNCSEARch {OFF|ON}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SYNCSEARch?
Info
  • OFF specifies the Sync bits as OFF (for Low Speed and Full Speed).
  • ON specifies the Sync bits as ON (for High Speed).

tokentype property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:TOKENType command.

Description
  • This command specifies the eUSB trigger type to be valid on any, sof, out, in, or setup condition. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:TOKENType? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:TOKENType? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:TOKENType value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:TOKENType {ANY|SOF|OUT|IN|SETUP}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:TOKENType?
Info
  • ANY specifies the token type as Any (XX01).
  • SOF specifies the token type as Start Of Frame (0101).
  • OUT specifies the token type as OUT (0001).
  • IN specifies the token type as IN (1001).
  • SETUP specifies the token type as SETUP (1101).

SearchSearchItemTriggerABusEusbAddress

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:ADDress command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:ADDress? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:ADDress? query and raise an AssertionError if the returned value does not match value.
Properties
  • .hivalue: The SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:ADDress:HIVALue command.
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:ADDress:VALue command.

hivalue property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:ADDress:HIVALue command.

Description
  • This command sets the high binary address value to be used when triggering on a eUSB bus signal. The trigger condition must be set to TOKEN.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:ADDress:HIVALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:ADDress:HIVALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:ADDress:HIVALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:ADDress:HIVALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:ADDress:HIVALue?
Info
  • <QString> specifies the value in the specified valid format. The valid characters are 0, 1, and X (for binary, for hexadecimal, and symbolic).

value property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:ADDress:VALue command.

Description
  • This command sets the binary address value to be used when triggering on a eUSB bus signal. The trigger condition must be set to TOKEN. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:ADDress:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:ADDress:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:ADDress:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:ADDress:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:ADDress:VALue?
Info
  • <QString> specifies the value in the specified valid format. The valid characters are 0, 1, and X (for binary, for hexadecimal, and symbolic).

SearchSearchItemTriggerABusEusbAddressHivalue

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:ADDress:HIVALue command.

Description
  • This command sets the high binary address value to be used when triggering on a eUSB bus signal. The trigger condition must be set to TOKEN.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:ADDress:HIVALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:ADDress:HIVALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:ADDress:HIVALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:ADDress:HIVALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:ADDress:HIVALue?
Info
  • <QString> specifies the value in the specified valid format. The valid characters are 0, 1, and X (for binary, for hexadecimal, and symbolic).

SearchSearchItemTriggerABusEusbAddressValue

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:ADDress:VALue command.

Description
  • This command sets the binary address value to be used when triggering on a eUSB bus signal. The trigger condition must be set to TOKEN. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:ADDress:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:ADDress:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:ADDress:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:ADDress:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:ADDress:VALue?
Info
  • <QString> specifies the value in the specified valid format. The valid characters are 0, 1, and X (for binary, for hexadecimal, and symbolic).

SearchSearchItemTriggerABusEusbCondition

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:CONDition command.

Description
  • This command sets or queries the search type for the specified search. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:CONDition? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:CONDition? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:CONDition value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:CONDition {SYNC|HANDSHAKEPacket|SPECIALPacket|ERRor|TOKENPacket|DATAPacket|RESET|CONNect|CONTROLMESSage|SUSPEND|DEVICEChirp|HOSTChirp|PORTReset|PORTConfiguration|RESUME|RAP|EOP}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:CONDition?
Info
  • SYNC specifies the search condition as Sync.
  • HANDSHAKEPacket specifies the search condition as Handshake Packet.
  • SPECIALPacket specifies the search condition as Special Packet.
  • ERRor specifies the search condition as Error.
  • TOKENPacket specifies the search condition as Token (Address) Packet.
  • DATAPacket specifies the search condition as Data Packet.
  • RESET specifies the search condition as Reset.
  • CONNect specifies the search condition as connect.
  • CONTROLMESSage specifies the search condition as Control Message.
  • SUSPEND specifies the search condition as Suspend.
  • DEVICEChirp specifies the search condition as Device chirp.
  • HOSTChirp specifies the search condition as Host Chirp.
  • PORTReset specifies the search condition as Port Reset.
  • PORTConfiguration specifies the search condition as Port Configuration.
  • RESUME specifies the search condition as Resume.
  • RAP specifies the search condition as Register Access Protocol.
  • EOP specifies the search condition as End of Packet.

SearchSearchItemTriggerABusEusbData

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:DATa command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:DATa? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:DATa? query and raise an AssertionError if the returned value does not match value.
Properties
  • .hivalue: The SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:DATa:HIVALue command.
  • .offset: The SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:DATa:OFFSet command.
  • .qualifier: The SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:DATa:QUAlifier command.
  • .size: The SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:DATa:SIZe command.
  • .type: The SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:DATa:TYPe command.
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:DATa:VALue command.

hivalue property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:DATa:HIVALue command.

Description
  • This command sets the high binary data value to be used when triggering on a eUSB bus signal. The trigger condition must be set to DATA. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:DATa:HIVALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:DATa:HIVALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:DATa:HIVALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:DATa:HIVALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:DATa:HIVALue?
Info
  • <QString> specifies the value in the specified valid format. The valid characters are 0, 1, and X (for binary, for hexadecimal, and symbolic).

offset property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:DATa:OFFSet command.

Description
  • This command sets the byte offset to look for a data pattern at, in bytes, to be used when triggering on a eUSB bus signal. The trigger condition must be set to DATA. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:DATa:OFFSet? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:DATa:OFFSet? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:DATa:OFFSet value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:DATa:OFFSet <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:DATa:OFFSet?
Info
  • <NR1> specifies the byte offset. Default offset value is -1. The argument range is -1 to 1024.

qualifier property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:DATa:QUAlifier command.

Description
  • This command sets the qualifier to be used when triggering on a eUSB bus signal. The trigger condition must be set to IDANDDATA OR DATA. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:DATa:QUAlifier? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:DATa:QUAlifier? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:DATa:QUAlifier value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:DATa:QUAlifier {EQual|UNEQual|LESSthan|MOREthan|LESSEQual|MOREEQual|Inrange|OUTrange}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:DATa:QUAlifier?
Info
  • EQual specifies the qualifier as Equal.
  • UNEQual specifies the qualifier as Not Equal to.
  • LESSthan specifies the qualifier as Less Than.
  • MOREthan specifies the qualifier as More Than.
  • LESSEQual specifies the qualifier as Less Than or Equal to.
  • MOREEQual specifies the qualifier as More Than or Equal to.
  • Inrange specifies the qualifier as Inside Range.
  • OUTrange specifies the qualifier as Out of Range.

size property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:DATa:SIZe command.

Description
  • This command sets the length of the data string, in bytes, to be used when triggering on a eUSB bus signal. The trigger condition must be set to DATA. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:DATa:SIZe? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:DATa:SIZe? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:DATa:SIZe value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:DATa:SIZe <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:DATa:SIZe?

type property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:DATa:TYPe command.

Description
  • This command specifies the eUSB trigger type to be valid on any, data0, data1, data2, or mdata condition. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:DATa:TYPe? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:DATa:TYPe? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:DATa:TYPe value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:DATa:TYPe {ANY|DATA<x>|MDATA}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:DATa:TYPe?
Info
  • ANY specifies either a DATA0 or DATA1 data packet type.
  • DATA0 specifies a DATA0 data packet type.
  • DATA1 specifies a DATA1 data packet type.
  • DATA2 specifies a DATA2 data packet type when on HIGH speed.
  • MDATA specifies a MDATA data packet type when on HIGH speed.

value property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:DATa:VALue command.

Description
  • This command sets the binary data value to be used when triggering on a eUSB bus signal. The trigger condition must be set to DATA. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:DATa:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:DATa:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:DATa:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:DATa:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:DATa:VALue?
Info
  • <QString> specifies the value in the specified valid format. The valid characters are 0, 1, and X (for binary, for hexadecimal, and symbolic).

SearchSearchItemTriggerABusEusbDataHivalue

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:DATa:HIVALue command.

Description
  • This command sets the high binary data value to be used when triggering on a eUSB bus signal. The trigger condition must be set to DATA. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:DATa:HIVALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:DATa:HIVALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:DATa:HIVALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:DATa:HIVALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:DATa:HIVALue?
Info
  • <QString> specifies the value in the specified valid format. The valid characters are 0, 1, and X (for binary, for hexadecimal, and symbolic).

SearchSearchItemTriggerABusEusbDataOffset

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:DATa:OFFSet command.

Description
  • This command sets the byte offset to look for a data pattern at, in bytes, to be used when triggering on a eUSB bus signal. The trigger condition must be set to DATA. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:DATa:OFFSet? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:DATa:OFFSet? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:DATa:OFFSet value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:DATa:OFFSet <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:DATa:OFFSet?
Info
  • <NR1> specifies the byte offset. Default offset value is -1. The argument range is -1 to 1024.

SearchSearchItemTriggerABusEusbDataQualifier

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:DATa:QUAlifier command.

Description
  • This command sets the qualifier to be used when triggering on a eUSB bus signal. The trigger condition must be set to IDANDDATA OR DATA. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:DATa:QUAlifier? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:DATa:QUAlifier? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:DATa:QUAlifier value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:DATa:QUAlifier {EQual|UNEQual|LESSthan|MOREthan|LESSEQual|MOREEQual|Inrange|OUTrange}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:DATa:QUAlifier?
Info
  • EQual specifies the qualifier as Equal.
  • UNEQual specifies the qualifier as Not Equal to.
  • LESSthan specifies the qualifier as Less Than.
  • MOREthan specifies the qualifier as More Than.
  • LESSEQual specifies the qualifier as Less Than or Equal to.
  • MOREEQual specifies the qualifier as More Than or Equal to.
  • Inrange specifies the qualifier as Inside Range.
  • OUTrange specifies the qualifier as Out of Range.

SearchSearchItemTriggerABusEusbDataSize

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:DATa:SIZe command.

Description
  • This command sets the length of the data string, in bytes, to be used when triggering on a eUSB bus signal. The trigger condition must be set to DATA. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:DATa:SIZe? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:DATa:SIZe? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:DATa:SIZe value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:DATa:SIZe <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:DATa:SIZe?

SearchSearchItemTriggerABusEusbDataType

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:DATa:TYPe command.

Description
  • This command specifies the eUSB trigger type to be valid on any, data0, data1, data2, or mdata condition. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:DATa:TYPe? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:DATa:TYPe? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:DATa:TYPe value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:DATa:TYPe {ANY|DATA<x>|MDATA}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:DATa:TYPe?
Info
  • ANY specifies either a DATA0 or DATA1 data packet type.
  • DATA0 specifies a DATA0 data packet type.
  • DATA1 specifies a DATA1 data packet type.
  • DATA2 specifies a DATA2 data packet type when on HIGH speed.
  • MDATA specifies a MDATA data packet type when on HIGH speed.

SearchSearchItemTriggerABusEusbDataValue

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:DATa:VALue command.

Description
  • This command sets the binary data value to be used when triggering on a eUSB bus signal. The trigger condition must be set to DATA. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:DATa:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:DATa:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:DATa:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:DATa:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:DATa:VALue?
Info
  • <QString> specifies the value in the specified valid format. The valid characters are 0, 1, and X (for binary, for hexadecimal, and symbolic).

SearchSearchItemTriggerABusEusbDatabits

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:DATABITS command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:DATABITS? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:DATABITS? query and raise an AssertionError if the returned value does not match value.
Properties
  • .size: The SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:DATABITS:SIZe command.

size property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:DATABITS:SIZe command.

Description
  • This command sets the number of Sync bits, in bytes, to be used when triggering on a eUSB bus signal. The trigger condition must be set to SYNC. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:DATABITS:SIZe? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:DATABITS:SIZe? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:DATABITS:SIZe value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:DATABITS:SIZe <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:DATABITS:SIZe?
Info
  • <NR1> specifies the number of the Sync bits. The default Sync bits is 12. The argument range is 12 to 32 bits.

SearchSearchItemTriggerABusEusbDatabitsSize

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:DATABITS:SIZe command.

Description
  • This command sets the number of Sync bits, in bytes, to be used when triggering on a eUSB bus signal. The trigger condition must be set to SYNC. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:DATABITS:SIZe? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:DATABITS:SIZe? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:DATABITS:SIZe value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:DATABITS:SIZe <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:DATABITS:SIZe?
Info
  • <NR1> specifies the number of the Sync bits. The default Sync bits is 12. The argument range is 12 to 32 bits.

SearchSearchItemTriggerABusEusbEndpoint

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:ENDPoint command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:ENDPoint? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:ENDPoint? query and raise an AssertionError if the returned value does not match value.
Properties
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:ENDPoint:VALue command.

value property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:ENDPoint:VALue command.

Description
  • This command sets the endpoint binary value to be used when triggering on a eUSB bus signal. The trigger condition must be set to TOKEN. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:ENDPoint:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:ENDPoint:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:ENDPoint:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:ENDPoint:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:ENDPoint:VALue?
Info
  • <QString> specifies the data value in the specified valid format. The valid characters are 0, 1, and X for binary format; A-F, 0-9 and X for hexadecimal format.

SearchSearchItemTriggerABusEusbEndpointValue

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:ENDPoint:VALue command.

Description
  • This command sets the endpoint binary value to be used when triggering on a eUSB bus signal. The trigger condition must be set to TOKEN. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:ENDPoint:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:ENDPoint:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:ENDPoint:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:ENDPoint:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:ENDPoint:VALue?
Info
  • <QString> specifies the data value in the specified valid format. The valid characters are 0, 1, and X for binary format; A-F, 0-9 and X for hexadecimal format.

SearchSearchItemTriggerABusEusbEndsearch

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:ENDSEARch command.

Description
  • This command specifies eUSB Search EOP Bits to be On and Off. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:ENDSEARch? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:ENDSEARch? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:ENDSEARch value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:ENDSEARch {OFF|ON}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:ENDSEARch?
Info
  • OFF specifies the EOP bits as OFF (for Low Speed and Full Speed).
  • ON specifies the EOP bits as ON (for High Speed).

SearchSearchItemTriggerABusEusbEop

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:EOP command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:EOP? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:EOP? query and raise an AssertionError if the returned value does not match value.
Properties
  • .databits: The SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:EOP:DATABITS command tree.
  • .qualifier: The SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:EOP:QUAlifier command.

databits property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:EOP:DATABITS command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:EOP:DATABITS? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:EOP:DATABITS? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .size: The SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:EOP:DATABITS:SIZe command.

qualifier property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:EOP:QUAlifier command.

Description
  • This command sets the qualifier to be used when triggering on a eUSB bus signal. The trigger condition must be set to EOP Bits. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:EOP:QUAlifier? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:EOP:QUAlifier? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:EOP:QUAlifier value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:EOP:QUAlifier {EQual|UNEQual|LESSthan|MOREthan|LESSEQual|MOREEQual|INrange|OUTrange}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:EOP:QUAlifier?
Info
  • EQual specifies the qualifier as Equal.
  • UNEQual specifies the qualifier as Not Equal to.
  • LESSthan specifies the qualifier as Less Than.
  • MOREthan specifies the qualifier as More Than.
  • LESSEQual specifies the qualifier as Less Than or Equal to.
  • MOREEQual specifies the qualifier as More Than or Equal to.
  • INrange specifies the qualifier as Inside Range.
  • OUTrange specifies the qualifier as Out of Range.

SearchSearchItemTriggerABusEusbEopDatabits

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:EOP:DATABITS command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:EOP:DATABITS? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:EOP:DATABITS? query and raise an AssertionError if the returned value does not match value.
Properties
  • .size: The SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:EOP:DATABITS:SIZe command.

size property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:EOP:DATABITS:SIZe command.

Description
  • This command sets the number of EOP bits, in bytes, to be used when triggering on a eUSB bus signal. The trigger condition must be set to EOP. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:EOP:DATABITS:SIZe? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:EOP:DATABITS:SIZe? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:EOP:DATABITS:SIZe value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:EOP:DATABITS:SIZe <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:EOP:DATABITS:SIZe?
Info
  • <NR1> specifies the number of EOP bits. The default EOP bits is 8. The argument range is 8 to 100 bits.

SearchSearchItemTriggerABusEusbEopDatabitsSize

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:EOP:DATABITS:SIZe command.

Description
  • This command sets the number of EOP bits, in bytes, to be used when triggering on a eUSB bus signal. The trigger condition must be set to EOP. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:EOP:DATABITS:SIZe? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:EOP:DATABITS:SIZe? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:EOP:DATABITS:SIZe value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:EOP:DATABITS:SIZe <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:EOP:DATABITS:SIZe?
Info
  • <NR1> specifies the number of EOP bits. The default EOP bits is 8. The argument range is 8 to 100 bits.

SearchSearchItemTriggerABusEusbEopQualifier

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:EOP:QUAlifier command.

Description
  • This command sets the qualifier to be used when triggering on a eUSB bus signal. The trigger condition must be set to EOP Bits. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:EOP:QUAlifier? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:EOP:QUAlifier? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:EOP:QUAlifier value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:EOP:QUAlifier {EQual|UNEQual|LESSthan|MOREthan|LESSEQual|MOREEQual|INrange|OUTrange}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:EOP:QUAlifier?
Info
  • EQual specifies the qualifier as Equal.
  • UNEQual specifies the qualifier as Not Equal to.
  • LESSthan specifies the qualifier as Less Than.
  • MOREthan specifies the qualifier as More Than.
  • LESSEQual specifies the qualifier as Less Than or Equal to.
  • MOREEQual specifies the qualifier as More Than or Equal to.
  • INrange specifies the qualifier as Inside Range.
  • OUTrange specifies the qualifier as Out of Range.

SearchSearchItemTriggerABusEusbEopbits

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:EOPBITS command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:EOPBITS? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:EOPBITS? query and raise an AssertionError if the returned value does not match value.
Properties
  • .max: The SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:EOPBITS:MAX command tree.
  • .min: The SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:EOPBITS:MIN command tree.

max property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:EOPBITS:MAX command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:EOPBITS:MAX? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:EOPBITS:MAX? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .size: The SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:EOPBITS:MAX:SIZe command.

min property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:EOPBITS:MIN command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:EOPBITS:MIN? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:EOPBITS:MIN? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .size: The SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:EOPBITS:MIN:SIZe command.

SearchSearchItemTriggerABusEusbEopbitsMax

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:EOPBITS:MAX command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:EOPBITS:MAX? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:EOPBITS:MAX? query and raise an AssertionError if the returned value does not match value.
Properties
  • .size: The SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:EOPBITS:MAX:SIZe command.

size property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:EOPBITS:MAX:SIZe command.

Description
  • This command sets the number of EOP bits to be used when triggering on a eUSB bus signal. The trigger condition must be set to EOP. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:EOPBITS:MAX:SIZe? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:EOPBITS:MAX:SIZe? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:EOPBITS:MAX:SIZe value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:EOPBITS:MAX:SIZe <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:EOPBITS:MAX:SIZe?
Info
  • <NR1> specifies the number of EOP bits. The default maximum EOP bits is 100. The argument range is 9 to 100 bits.

SearchSearchItemTriggerABusEusbEopbitsMaxSize

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:EOPBITS:MAX:SIZe command.

Description
  • This command sets the number of EOP bits to be used when triggering on a eUSB bus signal. The trigger condition must be set to EOP. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:EOPBITS:MAX:SIZe? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:EOPBITS:MAX:SIZe? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:EOPBITS:MAX:SIZe value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:EOPBITS:MAX:SIZe <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:EOPBITS:MAX:SIZe?
Info
  • <NR1> specifies the number of EOP bits. The default maximum EOP bits is 100. The argument range is 9 to 100 bits.

SearchSearchItemTriggerABusEusbEopbitsMin

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:EOPBITS:MIN command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:EOPBITS:MIN? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:EOPBITS:MIN? query and raise an AssertionError if the returned value does not match value.
Properties
  • .size: The SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:EOPBITS:MIN:SIZe command.

size property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:EOPBITS:MIN:SIZe command.

Description
  • This command sets the number of EOP bits to be used when triggering on a eUSB bus signal. The trigger condition must be set to EOP. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:EOPBITS:MIN:SIZe? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:EOPBITS:MIN:SIZe? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:EOPBITS:MIN:SIZe value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:EOPBITS:MIN:SIZe <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:EOPBITS:MIN:SIZe?
Info
  • <NR1> specifies the number of EOP bits. The default minimum EOP bits is 8. The argument range is 8 to 99 bits.

SearchSearchItemTriggerABusEusbEopbitsMinSize

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:EOPBITS:MIN:SIZe command.

Description
  • This command sets the number of EOP bits to be used when triggering on a eUSB bus signal. The trigger condition must be set to EOP. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:EOPBITS:MIN:SIZe? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:EOPBITS:MIN:SIZe? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:EOPBITS:MIN:SIZe value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:EOPBITS:MIN:SIZe <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:EOPBITS:MIN:SIZe?
Info
  • <NR1> specifies the number of EOP bits. The default minimum EOP bits is 8. The argument range is 8 to 99 bits.

SearchSearchItemTriggerABusEusbErrtype

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:ERRType command.

Description
  • This command specifies the eUSB trigger type to be valid on a PID, Token CRC5, Data CRC16, or Bit stuffing condition. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:ERRType? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:ERRType? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:ERRType value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:ERRType {BITSTUFFing|CRC5|CRC16|PID}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:ERRType?
Info
  • BITSTUFFing specifies the error type as Bit Stuffing.
  • CRC5 specifies the error type as Token CRC5 (Cyclic Redundancy Check 5).
  • CRC16 specifies the error type as Data CRC16 (Cyclic Redundancy Check 16).
  • PID specifies the error type as PID Check Bits.

SearchSearchItemTriggerABusEusbHandshaketype

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:HANDSHAKEType command.

Description
  • This command specifies the eUSB trigger type to be valid on any, ack, nak, stall, or nyet condition. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:HANDSHAKEType? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:HANDSHAKEType? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:HANDSHAKEType value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:HANDSHAKEType {ANY|ACK|NAK|STALL|NYET}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:HANDSHAKEType?
Info
  • ANY specifies the handshake type as Any (0010).
  • ACK specifies the handshake type as Acknowledgement (positive) (XX10).
  • NAK specifies the handshake type as Negative Acknowledgment (1010).
  • STALL specifies the error type as PID Check Bits.
  • NYET specifies the handshake type as Stall (endpoint is halted or control pipe request not supported) (1110).

SearchSearchItemTriggerABusEusbRap

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:RAP command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:RAP? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:RAP? query and raise an AssertionError if the returned value does not match value.
Properties
  • .address: The SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:RAP:ADDress command tree.
  • .command: The SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:RAP:COMMand command.
  • .data: The SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:RAP:DATa command tree.
  • .option: The SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:RAP:OPTion command.

address property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:RAP:ADDress command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:RAP:ADDress? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:RAP:ADDress? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:RAP:ADDress:VALue command.

command property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:RAP:COMMand command.

Description
  • This command specifies the eUSB Register Access Protocol search option. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:RAP:COMMand? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:RAP:COMMand? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:RAP:COMMand value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:RAP:COMMand {ALL|WRITe|READ|CLEar|SET}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:RAP:COMMand?
Info
  • ALL specifies the RAP command as All.
  • WRITe specifies the RAP command as Write.
  • READ specifies the RAP command as Read.
  • CLEar specifies the RAP command as Clear.
  • SET specifies the RAP command as Set.

data property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:RAP:DATa command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:RAP:DATa? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:RAP:DATa? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:RAP:DATa:VALue command.

option property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:RAP:OPTion command.

Description
  • This command specifies the eUSB Register Access Protocol search option. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:RAP:OPTion? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:RAP:OPTion? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:RAP:OPTion value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:RAP:OPTion {COMMand|ADDRess|RAPDATa}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:RAP:OPTion?
Info
  • COMMand specifies the RAP option as Command.
  • ADDRess specifies the RAP option as Address.
  • RAPDATa specifies the RAP option as RapData.

SearchSearchItemTriggerABusEusbRapAddress

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:RAP:ADDress command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:RAP:ADDress? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:RAP:ADDress? query and raise an AssertionError if the returned value does not match value.
Properties
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:RAP:ADDress:VALue command.

value property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:RAP:ADDress:VALue command.

Description
  • This command sets the binary Register Access Protocol address value to be used when triggering on a eUSB bus signal. The trigger condition must be set to TOKEN. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:RAP:ADDress:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:RAP:ADDress:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:RAP:ADDress:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:RAP:ADDress:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:RAP:ADDress:VALue?
Info
  • <QString> specifies the value in the specified valid format. The valid characters are 0, 1, and X for binary; for hexadecimal; and symbolic.

SearchSearchItemTriggerABusEusbRapAddressValue

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:RAP:ADDress:VALue command.

Description
  • This command sets the binary Register Access Protocol address value to be used when triggering on a eUSB bus signal. The trigger condition must be set to TOKEN. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:RAP:ADDress:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:RAP:ADDress:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:RAP:ADDress:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:RAP:ADDress:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:RAP:ADDress:VALue?
Info
  • <QString> specifies the value in the specified valid format. The valid characters are 0, 1, and X for binary; for hexadecimal; and symbolic.

SearchSearchItemTriggerABusEusbRapCommand

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:RAP:COMMand command.

Description
  • This command specifies the eUSB Register Access Protocol search option. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:RAP:COMMand? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:RAP:COMMand? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:RAP:COMMand value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:RAP:COMMand {ALL|WRITe|READ|CLEar|SET}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:RAP:COMMand?
Info
  • ALL specifies the RAP command as All.
  • WRITe specifies the RAP command as Write.
  • READ specifies the RAP command as Read.
  • CLEar specifies the RAP command as Clear.
  • SET specifies the RAP command as Set.

SearchSearchItemTriggerABusEusbRapData

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:RAP:DATa command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:RAP:DATa? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:RAP:DATa? query and raise an AssertionError if the returned value does not match value.
Properties
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:RAP:DATa:VALue command.

value property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:RAP:DATa:VALue command.

Description
  • This command sets the binary Register Access Protocol data value to be used when triggering on a eUSB bus signal. The trigger condition must be set to TOKEN. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:RAP:DATa:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:RAP:DATa:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:RAP:DATa:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:RAP:DATa:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:RAP:DATa:VALue?
Info
  • <QString> specifies the value in the specified valid format. The valid characters are 0, 1, and X for binary; for hexadecimal; and symbolic.

SearchSearchItemTriggerABusEusbRapDataValue

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:RAP:DATa:VALue command.

Description
  • This command sets the binary Register Access Protocol data value to be used when triggering on a eUSB bus signal. The trigger condition must be set to TOKEN. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:RAP:DATa:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:RAP:DATa:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:RAP:DATa:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:RAP:DATa:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:RAP:DATa:VALue?
Info
  • <QString> specifies the value in the specified valid format. The valid characters are 0, 1, and X for binary; for hexadecimal; and symbolic.

SearchSearchItemTriggerABusEusbRapOption

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:RAP:OPTion command.

Description
  • This command specifies the eUSB Register Access Protocol search option. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:RAP:OPTion? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:RAP:OPTion? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:RAP:OPTion value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:RAP:OPTion {COMMand|ADDRess|RAPDATa}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:RAP:OPTion?
Info
  • COMMand specifies the RAP option as Command.
  • ADDRess specifies the RAP option as Address.
  • RAPDATa specifies the RAP option as RapData.

SearchSearchItemTriggerABusEusbSofframenumber

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SOFFRAMENUMber command.

Description
  • This command sets the binary frame number to be used when triggering on a eUSB bus signal. The trigger condition must be set to TOKEN. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SOFFRAMENUMber? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SOFFRAMENUMber? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SOFFRAMENUMber value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SOFFRAMENUMber <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SOFFRAMENUMber?
Info
  • <QString> specifies the binary frame number within the range 000 0000 0000 to 111 1111 1111 (000 hex to 7FF hex).

SearchSearchItemTriggerABusEusbSpecialtype

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPECIALType command.

Description
  • This command specifies the eUSB trigger type to be valid on any, err, split, ping, or reserved condition. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPECIALType? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPECIALType? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPECIALType value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPECIALType {ANY|PREamble|ERROr|SPLit|PING|RESERVed}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPECIALType?
Info
  • ANY specifies the PID value as Any (XX00).
  • PREamble specifies the PID value as PRE (1100).
  • ERROr specifies the PID value as ERR (1100).
  • SPLit specifies the PID value as Split (1000).
  • PING specifies the PID value as PING (0100).
  • RESERVed specifies the PID value as Reserved (0000).

SearchSearchItemTriggerABusEusbSplit

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPLit command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPLit? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPLit? query and raise an AssertionError if the returned value does not match value.
Properties
  • .et: The SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPLit:ET command tree.
  • .hub: The SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPLit:HUB command tree.
  • .port: The SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPLit:PORT command tree.
  • .sc: The SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPLit:SC command tree.
  • .se: The SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPLit:SE command tree.

et property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPLit:ET command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPLit:ET? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPLit:ET? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPLit:ET:VALue command.

hub property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPLit:HUB command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPLit:HUB? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPLit:HUB? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPLit:HUB:VALue command.

port property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPLit:PORT command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPLit:PORT? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPLit:PORT? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPLit:PORT:VALue command.

sc property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPLit:SC command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPLit:SC? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPLit:SC? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPLit:SC:VALue command.

se property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPLit:SE command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPLit:SE? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPLit:SE? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPLit:SE:VALue command.

SearchSearchItemTriggerABusEusbSplitEt

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPLit:ET command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPLit:ET? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPLit:ET? query and raise an AssertionError if the returned value does not match value.
Properties
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPLit:ET:VALue command.

value property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPLit:ET:VALue command.

Description
  • This command specifies the eUSB trigger type endpoint condition. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPLit:ET:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPLit:ET:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPLit:ET:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPLit:ET:VALue {NOCARE|CONTRol|ISOchronous|BULK|INTERRUPT}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPLit:ET:VALue?
Info
  • NOCARE specifies the Endpoint Type value as Don’t Care.
  • CONTRol specifies the Endpoint Type value as Control (00).
  • ISOchronous specifies the Endpoint Type value as Isochronous (01).
  • BULK specifies the Endpoint Type value as Bulk (10).
  • INTERRUPT specifies the Endpoint Type value as Interrupt (11).

SearchSearchItemTriggerABusEusbSplitEtValue

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPLit:ET:VALue command.

Description
  • This command specifies the eUSB trigger type endpoint condition. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPLit:ET:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPLit:ET:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPLit:ET:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPLit:ET:VALue {NOCARE|CONTRol|ISOchronous|BULK|INTERRUPT}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPLit:ET:VALue?
Info
  • NOCARE specifies the Endpoint Type value as Don’t Care.
  • CONTRol specifies the Endpoint Type value as Control (00).
  • ISOchronous specifies the Endpoint Type value as Isochronous (01).
  • BULK specifies the Endpoint Type value as Bulk (10).
  • INTERRUPT specifies the Endpoint Type value as Interrupt (11).

SearchSearchItemTriggerABusEusbSplitHub

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPLit:HUB command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPLit:HUB? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPLit:HUB? query and raise an AssertionError if the returned value does not match value.
Properties
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPLit:HUB:VALue command.

value property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPLit:HUB:VALue command.

Description
  • This command sets the binary hub address value to be used when triggering on a eUSB bus signal. The trigger condition must be set to Special with packet type SPLIT. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPLit:HUB:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPLit:HUB:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPLit:HUB:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPLit:HUB:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPLit:HUB:VALue?
Info
  • <QString> specifies the value in the specified valid format. The valid characters are 0, 1, and X (for binary, for hexadecimal, and symbolic).

SearchSearchItemTriggerABusEusbSplitHubValue

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPLit:HUB:VALue command.

Description
  • This command sets the binary hub address value to be used when triggering on a eUSB bus signal. The trigger condition must be set to Special with packet type SPLIT. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPLit:HUB:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPLit:HUB:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPLit:HUB:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPLit:HUB:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPLit:HUB:VALue?
Info
  • <QString> specifies the value in the specified valid format. The valid characters are 0, 1, and X (for binary, for hexadecimal, and symbolic).

SearchSearchItemTriggerABusEusbSplitPort

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPLit:PORT command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPLit:PORT? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPLit:PORT? query and raise an AssertionError if the returned value does not match value.
Properties
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPLit:PORT:VALue command.

value property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPLit:PORT:VALue command.

Description
  • This command sets the binary port address value to be used when triggering on a eUSB bus signal. The trigger condition must be set to Special with a packet type SPLIT. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPLit:PORT:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPLit:PORT:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPLit:PORT:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPLit:PORT:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPLit:PORT:VALue?
Info
  • <QString> specifies the value in the specified valid format. The valid characters are 0, 1, and X (for binary, for hexadecimal, and symbolic).

SearchSearchItemTriggerABusEusbSplitPortValue

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPLit:PORT:VALue command.

Description
  • This command sets the binary port address value to be used when triggering on a eUSB bus signal. The trigger condition must be set to Special with a packet type SPLIT. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPLit:PORT:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPLit:PORT:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPLit:PORT:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPLit:PORT:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPLit:PORT:VALue?
Info
  • <QString> specifies the value in the specified valid format. The valid characters are 0, 1, and X (for binary, for hexadecimal, and symbolic).

SearchSearchItemTriggerABusEusbSplitSc

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPLit:SC command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPLit:SC? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPLit:SC? query and raise an AssertionError if the returned value does not match value.
Properties
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPLit:SC:VALue command.

value property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPLit:SC:VALue command.

Description
  • This command specifies the eUSB trigger type start/complete condition. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPLit:SC:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPLit:SC:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPLit:SC:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPLit:SC:VALue {NOCARE|SSPLIT|CSPLIT}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPLit:SC:VALue?
Info
  • NOCARE sets the trigger on either the start or complete phase of the split transaction.
  • SSPLIT sets the trigger on the start phase of the split transaction.
  • CSPLIT sets the trigger on the complete phase of the split transaction.

SearchSearchItemTriggerABusEusbSplitScValue

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPLit:SC:VALue command.

Description
  • This command specifies the eUSB trigger type start/complete condition. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPLit:SC:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPLit:SC:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPLit:SC:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPLit:SC:VALue {NOCARE|SSPLIT|CSPLIT}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPLit:SC:VALue?
Info
  • NOCARE sets the trigger on either the start or complete phase of the split transaction.
  • SSPLIT sets the trigger on the start phase of the split transaction.
  • CSPLIT sets the trigger on the complete phase of the split transaction.

SearchSearchItemTriggerABusEusbSplitSe

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPLit:SE command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPLit:SE? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPLit:SE? query and raise an AssertionError if the returned value does not match value.
Properties
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPLit:SE:VALue command.

value property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPLit:SE:VALue command.

Description
  • This command specifies the eUSB trigger type start/complete condition. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPLit:SE:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPLit:SE:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPLit:SE:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPLit:SE:VALue {NOCARE|FULLSPEED|LOWSPEED|ISOSTART|ISOMID|ISOEND|ISOALL}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPLit:SE:VALue?
Info
  • NOCARE sets the trigger on any combination of S and E bits.
  • FULLSPEED sets the trigger on S bit = 0 and E bit = 0.
  • LOWSPEED sets the trigger on S bit = 1 and E bit = 0.
  • ISOSTART sets the trigger on S bit = 1, E bit = 0.
  • ISOMID specifies Isochronous Data is Middle (00) Start/End bit value.
  • ISOEND specifies Isochronous Data is End (01) Start/End bit value.
  • ISOALL specifies Isochronous Data is All (11) Start/End bit value.

SearchSearchItemTriggerABusEusbSplitSeValue

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPLit:SE:VALue command.

Description
  • This command specifies the eUSB trigger type start/complete condition. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPLit:SE:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPLit:SE:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPLit:SE:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPLit:SE:VALue {NOCARE|FULLSPEED|LOWSPEED|ISOSTART|ISOMID|ISOEND|ISOALL}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPLit:SE:VALue?
Info
  • NOCARE sets the trigger on any combination of S and E bits.
  • FULLSPEED sets the trigger on S bit = 0 and E bit = 0.
  • LOWSPEED sets the trigger on S bit = 1 and E bit = 0.
  • ISOSTART sets the trigger on S bit = 1, E bit = 0.
  • ISOMID specifies Isochronous Data is Middle (00) Start/End bit value.
  • ISOEND specifies Isochronous Data is End (01) Start/End bit value.
  • ISOALL specifies Isochronous Data is All (11) Start/End bit value.

SearchSearchItemTriggerABusEusbSync

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SYNC command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SYNC? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SYNC? query and raise an AssertionError if the returned value does not match value.
Properties
  • .qualifier: The SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SYNC:QUAlifier command.

qualifier property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SYNC:QUAlifier command.

Description
  • This command sets the qualifier to be used when triggering on a eUSB bus signal. The trigger condition must be set to Sync Bits. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SYNC:QUAlifier? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SYNC:QUAlifier? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SYNC:QUAlifier value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SYNC:QUAlifier {EQual|UNEQual|LESSthan|MOREthan|LESSEQual|MOREEQual|INrange|OUTrange}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SYNC:QUAlifier?
Info
  • EQual specifies the qualifier as Equal.
  • UNEQual specifies the qualifier as Not Equal to.
  • LESSthan specifies the qualifier as Less Than.
  • MOREthan specifies the qualifier as More Than.
  • LESSEQual specifies the qualifier as Less Than or Equal to.
  • MOREEQual specifies the qualifier as More Than or Equal to.
  • INrange specifies the qualifier as Inside Range.
  • OUTrange specifies the qualifier as Out of Range.

SearchSearchItemTriggerABusEusbSyncQualifier

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SYNC:QUAlifier command.

Description
  • This command sets the qualifier to be used when triggering on a eUSB bus signal. The trigger condition must be set to Sync Bits. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SYNC:QUAlifier? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SYNC:QUAlifier? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SYNC:QUAlifier value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SYNC:QUAlifier {EQual|UNEQual|LESSthan|MOREthan|LESSEQual|MOREEQual|INrange|OUTrange}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SYNC:QUAlifier?
Info
  • EQual specifies the qualifier as Equal.
  • UNEQual specifies the qualifier as Not Equal to.
  • LESSthan specifies the qualifier as Less Than.
  • MOREthan specifies the qualifier as More Than.
  • LESSEQual specifies the qualifier as Less Than or Equal to.
  • MOREEQual specifies the qualifier as More Than or Equal to.
  • INrange specifies the qualifier as Inside Range.
  • OUTrange specifies the qualifier as Out of Range.

SearchSearchItemTriggerABusEusbSyncbits

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SYNCBITS command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SYNCBITS? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SYNCBITS? query and raise an AssertionError if the returned value does not match value.
Properties
  • .max: The SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SYNCBITS:MAX command tree.
  • .min: The SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SYNCBITS:MIN command tree.

max property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SYNCBITS:MAX command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SYNCBITS:MAX? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SYNCBITS:MAX? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .size: The SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SYNCBITS:MAX:SIZe command.

min property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SYNCBITS:MIN command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SYNCBITS:MIN? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SYNCBITS:MIN? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .size: The SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SYNCBITS:MIN:SIZe command.

SearchSearchItemTriggerABusEusbSyncbitsMax

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SYNCBITS:MAX command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SYNCBITS:MAX? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SYNCBITS:MAX? query and raise an AssertionError if the returned value does not match value.
Properties
  • .size: The SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SYNCBITS:MAX:SIZe command.

size property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SYNCBITS:MAX:SIZe command.

Description
  • This command sets the number of sync bits, to be used when triggering on a eUSB bus signal. The trigger condition must be set to SYNC. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SYNCBITS:MAX:SIZe? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SYNCBITS:MAX:SIZe? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SYNCBITS:MAX:SIZe value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SYNCBITS:MAX:SIZe <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SYNCBITS:MAX:SIZe?
Info
  • <NR1> specifies the number of sync bits. The default maximum Sync bits is 32. The argument range is 13 to 32 bits.

SearchSearchItemTriggerABusEusbSyncbitsMaxSize

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SYNCBITS:MAX:SIZe command.

Description
  • This command sets the number of sync bits, to be used when triggering on a eUSB bus signal. The trigger condition must be set to SYNC. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SYNCBITS:MAX:SIZe? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SYNCBITS:MAX:SIZe? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SYNCBITS:MAX:SIZe value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SYNCBITS:MAX:SIZe <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SYNCBITS:MAX:SIZe?
Info
  • <NR1> specifies the number of sync bits. The default maximum Sync bits is 32. The argument range is 13 to 32 bits.

SearchSearchItemTriggerABusEusbSyncbitsMin

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SYNCBITS:MIN command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SYNCBITS:MIN? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SYNCBITS:MIN? query and raise an AssertionError if the returned value does not match value.
Properties
  • .size: The SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SYNCBITS:MIN:SIZe command.

size property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SYNCBITS:MIN:SIZe command.

Description
  • This command sets the number of sync bits, in bits, to be used when triggering on a eUSB bus signal. The trigger condition must be set to SYNC. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SYNCBITS:MIN:SIZe? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SYNCBITS:MIN:SIZe? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SYNCBITS:MIN:SIZe value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SYNCBITS:MIN:SIZe <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SYNCBITS:MIN:SIZe?
Info
  • <NR1> specifies the number of sync bits. The default minimum Sync bits is 12. The argument range is 12 to 31 bits.

SearchSearchItemTriggerABusEusbSyncbitsMinSize

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SYNCBITS:MIN:SIZe command.

Description
  • This command sets the number of sync bits, in bits, to be used when triggering on a eUSB bus signal. The trigger condition must be set to SYNC. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SYNCBITS:MIN:SIZe? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SYNCBITS:MIN:SIZe? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SYNCBITS:MIN:SIZe value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SYNCBITS:MIN:SIZe <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SYNCBITS:MIN:SIZe?
Info
  • <NR1> specifies the number of sync bits. The default minimum Sync bits is 12. The argument range is 12 to 31 bits.

SearchSearchItemTriggerABusEusbSyncsearch

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SYNCSEARch command.

Description
  • This command specifies eUSB Search Sync Bits to be On and Off. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SYNCSEARch? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SYNCSEARch? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SYNCSEARch value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SYNCSEARch {OFF|ON}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SYNCSEARch?
Info
  • OFF specifies the Sync bits as OFF (for Low Speed and Full Speed).
  • ON specifies the Sync bits as ON (for High Speed).

SearchSearchItemTriggerABusEusbTokentype

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:TOKENType command.

Description
  • This command specifies the eUSB trigger type to be valid on any, sof, out, in, or setup condition. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:TOKENType? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:TOKENType? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:TOKENType value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:TOKENType {ANY|SOF|OUT|IN|SETUP}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:TOKENType?
Info
  • ANY specifies the token type as Any (XX01).
  • SOF specifies the token type as Start Of Frame (0101).
  • OUT specifies the token type as OUT (0001).
  • IN specifies the token type as IN (1001).
  • SETUP specifies the token type as SETUP (1101).

SearchSearchItemTriggerABusFlexray

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY? query and raise an AssertionError if the returned value does not match value.
Properties
  • .condition: The SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:CONDition command.
  • .cyclecount: The SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:CYCLEcount command tree.
  • .data: The SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:DATa command tree.
  • .eoftype: The SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:EOFTYPE command.
  • .errtype: The SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:ERRTYPE command.
  • .frameid: The SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:FRAMEID command tree.
  • .frametype: The SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:FRAMEType command.
  • .header: The SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:HEADER command tree.

condition property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:CONDition command.

Description
  • This command sets or queries the FlexRay bus search condition. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:CONDition? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:CONDition? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:CONDition value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:CONDition {SOF|FRAMEType|IDentifier|CYCLEcount|HEADer|DATA|IDANDDATA|EOF|ERRor}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:CONDition?
Info
  • SOF sets the trigger condition to start of frame.
  • FRAMEType sets the trigger condition to frame type.
  • IDentifier sets the trigger condition to identifier.
  • CYCLEcount sets the trigger condition to cycle count.
  • HEADer sets the trigger condition to header.
  • DATA sets the trigger condition to data.
  • IDANDDATA sets the trigger condition to ID and data.
  • EOF sets the trigger condition to end of frame.
  • ERRor sets the trigger condition to error.

cyclecount property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:CYCLEcount command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:CYCLEcount? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:CYCLEcount? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .hivalue: The SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:CYCLEcount:HIVALue command.
  • .qualifier: The SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:CYCLEcount:QUALifier command.
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:CYCLEcount:VALue command.

data property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:DATa command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:DATa? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:DATa? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .hivalue: The SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:DATa:HIVALue command.
  • .offset: The SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:DATa:OFFSet command.
  • .qualifier: The SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:DATa:QUALifier command.
  • .size: The SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:DATa:SIZe command.
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:DATa:VALue command.

eoftype property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:EOFTYPE command.

Description
  • This command sets or queries the end of frame type when searching on a FlexRay bus signal. The search number is specified by x. The search condition must be set to EOF.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:EOFTYPE? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:EOFTYPE? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:EOFTYPE value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:EOFTYPE {ANY|STATIC|DYNAMIC}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:EOFTYPE?
Info
  • ANY specifies either end of file type.
  • STATIC specifies the static end of file type.
  • DYNAMIC specifies the static end of file type.

errtype property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:ERRTYPE command.

Description
  • This command sets or queries the error type when searching on a FlexRay bus signal. The search number is specified by x. The search condition must be set to ERROR.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:ERRTYPE? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:ERRTYPE? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:ERRTYPE value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:ERRTYPE {CRCHeader|CRCTrailer|NULLFRStatic|NULLFRDynamic|SYNCFrame|STARTupnosync}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:ERRTYPE?
Info
  • CRCHeader sets the error type to CRCHeader.
  • CRCTrailer sets the error type to CRCTrailer.
  • NULLFRStatic sets the error type to NULLFRStatic.
  • NULLFRDynamic sets the error type to NULLFRDynamic.
  • SYNCFrame sets the error type to SYNCFrame.
  • STARTupnosync sets the error type to STARTupnosync.

frameid property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:FRAMEID command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:FRAMEID? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:FRAMEID? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .hivalue: The SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:FRAMEID:HIVALue command.
  • .qualifier: The SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:FRAMEID:QUALifier command.
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:FRAMEID:VALue command.

frametype property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:FRAMEType command.

Description
  • This command sets or queries the FlexRay bus search frame type. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:FRAMEType? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:FRAMEType? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:FRAMEType value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:FRAMEType {NORMal|PAYload|NULL|SYNC|STARTup}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:FRAMEType?
Info
  • NORMal sets the frame type to normal.
  • PAYload sets the frame type to payload.
  • NULL sets the frame type to null.
  • SYNC sets the frame type to sync.
  • STARTup sets the frame type to startup.

header property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:HEADER command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:HEADER? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:HEADER? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .crc: The SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:HEADER:CRC command.
  • .cyclecount: The SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:HEADER:CYCLECount command.
  • .frameid: The SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:HEADER:FRAMEID command.
  • .indbits: The SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:HEADER:INDBits command.
  • .paylength: The SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:HEADER:PAYLENgth command.

SearchSearchItemTriggerABusFlexrayCondition

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:CONDition command.

Description
  • This command sets or queries the FlexRay bus search condition. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:CONDition? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:CONDition? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:CONDition value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:CONDition {SOF|FRAMEType|IDentifier|CYCLEcount|HEADer|DATA|IDANDDATA|EOF|ERRor}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:CONDition?
Info
  • SOF sets the trigger condition to start of frame.
  • FRAMEType sets the trigger condition to frame type.
  • IDentifier sets the trigger condition to identifier.
  • CYCLEcount sets the trigger condition to cycle count.
  • HEADer sets the trigger condition to header.
  • DATA sets the trigger condition to data.
  • IDANDDATA sets the trigger condition to ID and data.
  • EOF sets the trigger condition to end of frame.
  • ERRor sets the trigger condition to error.

SearchSearchItemTriggerABusFlexrayCyclecount

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:CYCLEcount command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:CYCLEcount? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:CYCLEcount? query and raise an AssertionError if the returned value does not match value.
Properties
  • .hivalue: The SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:CYCLEcount:HIVALue command.
  • .qualifier: The SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:CYCLEcount:QUALifier command.
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:CYCLEcount:VALue command.

hivalue property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:CYCLEcount:HIVALue command.

Description
  • This command sets or queries the heigh value when searching on a FlexRay bus cycle count field. The search number is specified by x. The search condition must be set to CYCLEcount.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:CYCLEcount:HIVALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:CYCLEcount:HIVALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:CYCLEcount:HIVALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:CYCLEcount:HIVALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:CYCLEcount:HIVALue?
Info
  • <QString> specifies the cycle count value.

qualifier property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:CYCLEcount:QUALifier command.

Description
  • This command sets or queries the qualifier to be used when searching on a FlexRay bus search cycle count field. The search number is specified by x. The search condition must be set to CYCLEcount.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:CYCLEcount:QUALifier? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:CYCLEcount:QUALifier? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:CYCLEcount:QUALifier value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:CYCLEcount:QUALifier {EQual|LESSEQual|MOREEQual|UNEQual|LESSthan|MOREthan|INrange|OUTrange}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:CYCLEcount:QUALifier?
Info
  • EQual specifies the qualifier as equal.
  • LESSEQual specifies the qualifier as less equal.
  • MOREEQual specifies the qualifier as more equal.
  • UNEQual specifies the qualifier as unequal.
  • LESSthan specifies the qualifier as less than.
  • MOREthan specifies the qualifier as more than.
  • INrange specifies the qualifier as in range.
  • OUTrange specifies the qualifier as out of range.

value property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:CYCLEcount:VALue command.

Description
  • This command sets or queries the low value when searching on a FlexRay bus cycle count field. The search number is specified by x. The search condition must be set to CYCLEcount.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:CYCLEcount:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:CYCLEcount:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:CYCLEcount:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:CYCLEcount:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:CYCLEcount:VALue?
Info
  • <QString> specifies the cycle count value.

SearchSearchItemTriggerABusFlexrayCyclecountHivalue

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:CYCLEcount:HIVALue command.

Description
  • This command sets or queries the heigh value when searching on a FlexRay bus cycle count field. The search number is specified by x. The search condition must be set to CYCLEcount.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:CYCLEcount:HIVALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:CYCLEcount:HIVALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:CYCLEcount:HIVALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:CYCLEcount:HIVALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:CYCLEcount:HIVALue?
Info
  • <QString> specifies the cycle count value.

SearchSearchItemTriggerABusFlexrayCyclecountQualifier

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:CYCLEcount:QUALifier command.

Description
  • This command sets or queries the qualifier to be used when searching on a FlexRay bus search cycle count field. The search number is specified by x. The search condition must be set to CYCLEcount.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:CYCLEcount:QUALifier? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:CYCLEcount:QUALifier? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:CYCLEcount:QUALifier value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:CYCLEcount:QUALifier {EQual|LESSEQual|MOREEQual|UNEQual|LESSthan|MOREthan|INrange|OUTrange}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:CYCLEcount:QUALifier?
Info
  • EQual specifies the qualifier as equal.
  • LESSEQual specifies the qualifier as less equal.
  • MOREEQual specifies the qualifier as more equal.
  • UNEQual specifies the qualifier as unequal.
  • LESSthan specifies the qualifier as less than.
  • MOREthan specifies the qualifier as more than.
  • INrange specifies the qualifier as in range.
  • OUTrange specifies the qualifier as out of range.

SearchSearchItemTriggerABusFlexrayCyclecountValue

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:CYCLEcount:VALue command.

Description
  • This command sets or queries the low value when searching on a FlexRay bus cycle count field. The search number is specified by x. The search condition must be set to CYCLEcount.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:CYCLEcount:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:CYCLEcount:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:CYCLEcount:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:CYCLEcount:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:CYCLEcount:VALue?
Info
  • <QString> specifies the cycle count value.

SearchSearchItemTriggerABusFlexrayData

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:DATa command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:DATa? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:DATa? query and raise an AssertionError if the returned value does not match value.
Properties
  • .hivalue: The SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:DATa:HIVALue command.
  • .offset: The SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:DATa:OFFSet command.
  • .qualifier: The SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:DATa:QUALifier command.
  • .size: The SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:DATa:SIZe command.
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:DATa:VALue command.

hivalue property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:DATa:HIVALue command.

Description
  • This command sets or queries the high value when searching on a FlexRay bus data field. The search number is specified by x. The search condition must be set to IDANDDATA OR DATA.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:DATa:HIVALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:DATa:HIVALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:DATa:HIVALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:DATa:HIVALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:DATa:HIVALue?
Info
  • <QString> specifies the data value.

offset property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:DATa:OFFSet command.

Description
  • This command sets or queries the offset of the data string, in bytes, when searching on a FlexRay bus data field. The search number is specified by x. The search condition must be set to IDANDDATA OR DATA.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:DATa:OFFSet? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:DATa:OFFSet? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:DATa:OFFSet value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:DATa:OFFSet <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:DATa:OFFSet?
Info
  • <NR3> specifies the data offset in bytes. A setting of X/Don’t care is accomplished by setting the offset to -1.

qualifier property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:DATa:QUALifier command.

Description
  • This command sets or queries the qualifier to be used when searching on a FlexRay bus signal. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:DATa:QUALifier? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:DATa:QUALifier? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:DATa:QUALifier value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:DATa:QUALifier {EQual|LESSEQual|MOREEQual|UNEQual|LESSthan|MOREthan|INrange|OUTrange}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:DATa:QUALifier?
Info
  • EQual specifies the qualifier as equal.
  • LESSEQual specifies the qualifier as less equal.
  • MOREEQual specifies the qualifier as more equal.
  • UNEQual specifies the qualifier as unequal.
  • LESSthan specifies the qualifier as less than.
  • MOREthan specifies the qualifier as more than.
  • INrange specifies the qualifier as in range.
  • OUTrange specifies the qualifier as out of range.

size property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:DATa:SIZe command.

Description
  • This command sets or queries the length of the data string, in bytes, to be used when searching on a FlexRay bus data field. The search number is specified by x. The search condition must be set to IDANDDATA OR DATA.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:DATa:SIZe? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:DATa:SIZe? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:DATa:SIZe value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:DATa:SIZe <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:DATa:SIZe?
Info
  • <NR1> specifies the data size in bytes. A data size of -1 is don’t care.

value property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:DATa:VALue command.

Description
  • This command sets or queries the low value to be used when searching on a FlexRay bus data field. The search number is specified by x. The search condition must be set to IDANDDATA or DATA.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:DATa:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:DATa:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:DATa:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:DATa:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:DATa:VALue?
Info
  • <QString> specifies the data value.

SearchSearchItemTriggerABusFlexrayDataHivalue

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:DATa:HIVALue command.

Description
  • This command sets or queries the high value when searching on a FlexRay bus data field. The search number is specified by x. The search condition must be set to IDANDDATA OR DATA.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:DATa:HIVALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:DATa:HIVALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:DATa:HIVALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:DATa:HIVALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:DATa:HIVALue?
Info
  • <QString> specifies the data value.

SearchSearchItemTriggerABusFlexrayDataOffset

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:DATa:OFFSet command.

Description
  • This command sets or queries the offset of the data string, in bytes, when searching on a FlexRay bus data field. The search number is specified by x. The search condition must be set to IDANDDATA OR DATA.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:DATa:OFFSet? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:DATa:OFFSet? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:DATa:OFFSet value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:DATa:OFFSet <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:DATa:OFFSet?
Info
  • <NR3> specifies the data offset in bytes. A setting of X/Don’t care is accomplished by setting the offset to -1.

SearchSearchItemTriggerABusFlexrayDataQualifier

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:DATa:QUALifier command.

Description
  • This command sets or queries the qualifier to be used when searching on a FlexRay bus signal. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:DATa:QUALifier? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:DATa:QUALifier? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:DATa:QUALifier value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:DATa:QUALifier {EQual|LESSEQual|MOREEQual|UNEQual|LESSthan|MOREthan|INrange|OUTrange}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:DATa:QUALifier?
Info
  • EQual specifies the qualifier as equal.
  • LESSEQual specifies the qualifier as less equal.
  • MOREEQual specifies the qualifier as more equal.
  • UNEQual specifies the qualifier as unequal.
  • LESSthan specifies the qualifier as less than.
  • MOREthan specifies the qualifier as more than.
  • INrange specifies the qualifier as in range.
  • OUTrange specifies the qualifier as out of range.

SearchSearchItemTriggerABusFlexrayDataSize

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:DATa:SIZe command.

Description
  • This command sets or queries the length of the data string, in bytes, to be used when searching on a FlexRay bus data field. The search number is specified by x. The search condition must be set to IDANDDATA OR DATA.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:DATa:SIZe? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:DATa:SIZe? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:DATa:SIZe value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:DATa:SIZe <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:DATa:SIZe?
Info
  • <NR1> specifies the data size in bytes. A data size of -1 is don’t care.

SearchSearchItemTriggerABusFlexrayDataValue

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:DATa:VALue command.

Description
  • This command sets or queries the low value to be used when searching on a FlexRay bus data field. The search number is specified by x. The search condition must be set to IDANDDATA or DATA.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:DATa:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:DATa:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:DATa:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:DATa:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:DATa:VALue?
Info
  • <QString> specifies the data value.

SearchSearchItemTriggerABusFlexrayEoftype

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:EOFTYPE command.

Description
  • This command sets or queries the end of frame type when searching on a FlexRay bus signal. The search number is specified by x. The search condition must be set to EOF.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:EOFTYPE? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:EOFTYPE? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:EOFTYPE value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:EOFTYPE {ANY|STATIC|DYNAMIC}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:EOFTYPE?
Info
  • ANY specifies either end of file type.
  • STATIC specifies the static end of file type.
  • DYNAMIC specifies the static end of file type.

SearchSearchItemTriggerABusFlexrayErrtype

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:ERRTYPE command.

Description
  • This command sets or queries the error type when searching on a FlexRay bus signal. The search number is specified by x. The search condition must be set to ERROR.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:ERRTYPE? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:ERRTYPE? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:ERRTYPE value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:ERRTYPE {CRCHeader|CRCTrailer|NULLFRStatic|NULLFRDynamic|SYNCFrame|STARTupnosync}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:ERRTYPE?
Info
  • CRCHeader sets the error type to CRCHeader.
  • CRCTrailer sets the error type to CRCTrailer.
  • NULLFRStatic sets the error type to NULLFRStatic.
  • NULLFRDynamic sets the error type to NULLFRDynamic.
  • SYNCFrame sets the error type to SYNCFrame.
  • STARTupnosync sets the error type to STARTupnosync.

SearchSearchItemTriggerABusFlexrayFrameid

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:FRAMEID command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:FRAMEID? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:FRAMEID? query and raise an AssertionError if the returned value does not match value.
Properties
  • .hivalue: The SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:FRAMEID:HIVALue command.
  • .qualifier: The SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:FRAMEID:QUALifier command.
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:FRAMEID:VALue command.

hivalue property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:FRAMEID:HIVALue command.

Description
  • This command sets or queries the high value when searching on a FlexRay bus frame id field. The search condition must be set to IDentifier. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:FRAMEID:HIVALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:FRAMEID:HIVALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:FRAMEID:HIVALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:FRAMEID:HIVALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:FRAMEID:HIVALue?
Info
  • <QString> is the frame id high value.

qualifier property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:FRAMEID:QUALifier command.

Description
  • This command sets the qualifier to be used when searching on a FlexRay bus signal. The search condition must be set to Identifier. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:FRAMEID:QUALifier? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:FRAMEID:QUALifier? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:FRAMEID:QUALifier value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:FRAMEID:QUALifier {EQual|UNEQual|LESSthan|MOREthan|LESSEQual|MOREEQual|INrange|OUTrange}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:FRAMEID:QUALifier?
Info
  • EQual sets the qualifier to equal.
  • UNEQual sets the qualifier to unequal.
  • LESSthan sets the qualifier to less than.
  • MOREthan sets the qualifier to more than.
  • LESSEQual sets the qualifier to less equal.
  • MOREEQual sets the qualifier to more equal.
  • INrange sets the qualifier to in range.
  • OUTrange sets the qualifier to out of range.

value property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:FRAMEID:VALue command.

Description
  • This command sets the low value when searching on a FlexRay bus id field. The search condition must be set to IDentifier. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:FRAMEID:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:FRAMEID:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:FRAMEID:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:FRAMEID:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:FRAMEID:VALue?
Info
  • <QString> is the frame id value.

SearchSearchItemTriggerABusFlexrayFrameidHivalue

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:FRAMEID:HIVALue command.

Description
  • This command sets or queries the high value when searching on a FlexRay bus frame id field. The search condition must be set to IDentifier. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:FRAMEID:HIVALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:FRAMEID:HIVALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:FRAMEID:HIVALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:FRAMEID:HIVALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:FRAMEID:HIVALue?
Info
  • <QString> is the frame id high value.

SearchSearchItemTriggerABusFlexrayFrameidQualifier

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:FRAMEID:QUALifier command.

Description
  • This command sets the qualifier to be used when searching on a FlexRay bus signal. The search condition must be set to Identifier. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:FRAMEID:QUALifier? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:FRAMEID:QUALifier? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:FRAMEID:QUALifier value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:FRAMEID:QUALifier {EQual|UNEQual|LESSthan|MOREthan|LESSEQual|MOREEQual|INrange|OUTrange}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:FRAMEID:QUALifier?
Info
  • EQual sets the qualifier to equal.
  • UNEQual sets the qualifier to unequal.
  • LESSthan sets the qualifier to less than.
  • MOREthan sets the qualifier to more than.
  • LESSEQual sets the qualifier to less equal.
  • MOREEQual sets the qualifier to more equal.
  • INrange sets the qualifier to in range.
  • OUTrange sets the qualifier to out of range.

SearchSearchItemTriggerABusFlexrayFrameidValue

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:FRAMEID:VALue command.

Description
  • This command sets the low value when searching on a FlexRay bus id field. The search condition must be set to IDentifier. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:FRAMEID:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:FRAMEID:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:FRAMEID:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:FRAMEID:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:FRAMEID:VALue?
Info
  • <QString> is the frame id value.

SearchSearchItemTriggerABusFlexrayFrametype

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:FRAMEType command.

Description
  • This command sets or queries the FlexRay bus search frame type. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:FRAMEType? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:FRAMEType? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:FRAMEType value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:FRAMEType {NORMal|PAYload|NULL|SYNC|STARTup}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:FRAMEType?
Info
  • NORMal sets the frame type to normal.
  • PAYload sets the frame type to payload.
  • NULL sets the frame type to null.
  • SYNC sets the frame type to sync.
  • STARTup sets the frame type to startup.

SearchSearchItemTriggerABusFlexrayHeader

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:HEADER command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:HEADER? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:HEADER? query and raise an AssertionError if the returned value does not match value.
Properties
  • .crc: The SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:HEADER:CRC command.
  • .cyclecount: The SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:HEADER:CYCLECount command.
  • .frameid: The SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:HEADER:FRAMEID command.
  • .indbits: The SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:HEADER:INDBits command.
  • .paylength: The SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:HEADER:PAYLENgth command.

crc property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:HEADER:CRC command.

Description
  • This command sets or queries the CRC portion of the binary header string whensearching on a FlexRay bus header. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:HEADER:CRC? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:HEADER:CRC? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:HEADER:CRC value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:HEADER:CRC <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:HEADER:CRC?
Info
  • <QString> specifies the CRC.

cyclecount property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:HEADER:CYCLECount command.

Description
  • This command sets or queries the cycle count portion of the binary header string when searching on a FlexRay bus header. The search number is specified by x. The search condition must be set to HEADer.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:HEADER:CYCLECount? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:HEADER:CYCLECount? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:HEADER:CYCLECount value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:HEADER:CYCLECount <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:HEADER:CYCLECount?
Info
  • <QString> specifies the header cycle count.

frameid property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:HEADER:FRAMEID command.

Description
  • This command sets or queries the frame id portion of the binary header string when searching on a FlexRay bus header. The search number is specified by x. The search condition must be set to HEADer or IDANDDATA.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:HEADER:FRAMEID? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:HEADER:FRAMEID? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:HEADER:FRAMEID value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:HEADER:FRAMEID <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:HEADER:FRAMEID?
Info
  • <QString> specifies the frame ID.

indbits property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:HEADER:INDBits command.

Description
  • This command sets or queries the Indicator bits portion of the binary header string when searching on a FlexRay bus header. The search number is specified by x. The search condition must be set to HEADer.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:HEADER:INDBits? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:HEADER:INDBits? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:HEADER:INDBits value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:HEADER:INDBits <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:HEADER:INDBits?
Info
  • <QString> specifies the header Indicator Bits.

paylength property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:HEADER:PAYLENgth command.

Description
  • This command sets or queries the payload length portion of the binary header string when searching on a FlexRay bus search trigger header. The search number is specified by x. The search condition must be set to HEADer.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:HEADER:PAYLENgth? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:HEADER:PAYLENgth? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:HEADER:PAYLENgth value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:HEADER:PAYLENgth <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:HEADER:PAYLENgth?
Info
  • <QString> specifies the header Payload Length.

SearchSearchItemTriggerABusFlexrayHeaderCrc

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:HEADER:CRC command.

Description
  • This command sets or queries the CRC portion of the binary header string whensearching on a FlexRay bus header. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:HEADER:CRC? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:HEADER:CRC? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:HEADER:CRC value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:HEADER:CRC <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:HEADER:CRC?
Info
  • <QString> specifies the CRC.

SearchSearchItemTriggerABusFlexrayHeaderCyclecount

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:HEADER:CYCLECount command.

Description
  • This command sets or queries the cycle count portion of the binary header string when searching on a FlexRay bus header. The search number is specified by x. The search condition must be set to HEADer.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:HEADER:CYCLECount? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:HEADER:CYCLECount? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:HEADER:CYCLECount value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:HEADER:CYCLECount <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:HEADER:CYCLECount?
Info
  • <QString> specifies the header cycle count.

SearchSearchItemTriggerABusFlexrayHeaderFrameid

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:HEADER:FRAMEID command.

Description
  • This command sets or queries the frame id portion of the binary header string when searching on a FlexRay bus header. The search number is specified by x. The search condition must be set to HEADer or IDANDDATA.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:HEADER:FRAMEID? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:HEADER:FRAMEID? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:HEADER:FRAMEID value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:HEADER:FRAMEID <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:HEADER:FRAMEID?
Info
  • <QString> specifies the frame ID.

SearchSearchItemTriggerABusFlexrayHeaderIndbits

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:HEADER:INDBits command.

Description
  • This command sets or queries the Indicator bits portion of the binary header string when searching on a FlexRay bus header. The search number is specified by x. The search condition must be set to HEADer.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:HEADER:INDBits? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:HEADER:INDBits? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:HEADER:INDBits value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:HEADER:INDBits <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:HEADER:INDBits?
Info
  • <QString> specifies the header Indicator Bits.

SearchSearchItemTriggerABusFlexrayHeaderPaylength

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:HEADER:PAYLENgth command.

Description
  • This command sets or queries the payload length portion of the binary header string when searching on a FlexRay bus search trigger header. The search number is specified by x. The search condition must be set to HEADer.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:HEADER:PAYLENgth? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:HEADER:PAYLENgth? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:HEADER:PAYLENgth value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:HEADER:PAYLENgth <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:HEADER:PAYLENgth?
Info
  • <QString> specifies the header Payload Length.

SearchSearchItemTriggerABusI2c

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C? query and raise an AssertionError if the returned value does not match value.
Properties
  • .address: The SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:ADDRess command tree.
  • .condition: The SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:CONDition command.
  • .data: The SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:DATa command tree.

address property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:ADDRess command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:ADDRess? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:ADDRess? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .mode: The SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:ADDRess:MODe command.
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:ADDRess:VALue command.

condition property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:CONDition command.

Description
  • This command sets or queries the search condition for an I2C bus. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:CONDition? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:CONDition? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:CONDition value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:CONDition {ADDRess|ADDRANDDATA|DATa|ACKMISS|REPEATstart|STARt|STOP}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:CONDition?
Info
  • ADDRess specifies the trigger condition as Address.
  • ADDRANDDATA specifies the trigger condition as Address and Data.
  • DATa specifies the trigger condition as Data.
  • ACKMISS specifies the trigger condition as Missing of Acknowledgement.
  • REPEATstart specifies the trigger condition as Repeat of Start.
  • STARt specifies the trigger condition as Start.
  • STOP specifies the trigger condition as Stop.

data property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:DATa command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:DATa? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:DATa? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .direction: The SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:DATa:DIRection command.
  • .size: The SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:DATa:SIZe command.
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:DATa:VALue command.

SearchSearchItemTriggerABusI2cAddress

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:ADDRess command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:ADDRess? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:ADDRess? query and raise an AssertionError if the returned value does not match value.
Properties
  • .mode: The SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:ADDRess:MODe command.
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:ADDRess:VALue command.

mode property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:ADDRess:MODe command.

Description
  • This command sets or queries the I2C address mode for the specified bus search to determine where to place a mark. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:ADDRess:MODe? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:ADDRess:MODe? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:ADDRess:MODe value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:ADDRess:MODe {ADDR10|ADDR7}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:ADDRess:MODe?
Info
  • ADDR10 specifies the address mode as ADDR10.
  • ADDR7 specifies the address mode as ADDR7.

value property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:ADDRess:VALue command.

Description
  • This command sets or queries the binary address string used for the I2C search the specified search condition is Address or AddressData. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:ADDRess:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:ADDRess:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:ADDRess:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:ADDRess:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:ADDRess:VALue?
Info
  • <QString> specifies the address value. This is either a 7-bit or 10-bit value depending on the address mode. The valid characters are 0-9, A-F, and X for addresses in hexadecimal format; and 0, 1, and X otherwise.

SearchSearchItemTriggerABusI2cAddressMode

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:ADDRess:MODe command.

Description
  • This command sets or queries the I2C address mode for the specified bus search to determine where to place a mark. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:ADDRess:MODe? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:ADDRess:MODe? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:ADDRess:MODe value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:ADDRess:MODe {ADDR10|ADDR7}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:ADDRess:MODe?
Info
  • ADDR10 specifies the address mode as ADDR10.
  • ADDR7 specifies the address mode as ADDR7.

SearchSearchItemTriggerABusI2cAddressValue

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:ADDRess:VALue command.

Description
  • This command sets or queries the binary address string used for the I2C search the specified search condition is Address or AddressData. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:ADDRess:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:ADDRess:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:ADDRess:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:ADDRess:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:ADDRess:VALue?
Info
  • <QString> specifies the address value. This is either a 7-bit or 10-bit value depending on the address mode. The valid characters are 0-9, A-F, and X for addresses in hexadecimal format; and 0, 1, and X otherwise.

SearchSearchItemTriggerABusI2cCondition

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:CONDition command.

Description
  • This command sets or queries the search condition for an I2C bus. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:CONDition? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:CONDition? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:CONDition value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:CONDition {ADDRess|ADDRANDDATA|DATa|ACKMISS|REPEATstart|STARt|STOP}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:CONDition?
Info
  • ADDRess specifies the trigger condition as Address.
  • ADDRANDDATA specifies the trigger condition as Address and Data.
  • DATa specifies the trigger condition as Data.
  • ACKMISS specifies the trigger condition as Missing of Acknowledgement.
  • REPEATstart specifies the trigger condition as Repeat of Start.
  • STARt specifies the trigger condition as Start.
  • STOP specifies the trigger condition as Stop.

SearchSearchItemTriggerABusI2cData

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:DATa command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:DATa? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:DATa? query and raise an AssertionError if the returned value does not match value.
Properties
  • .direction: The SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:DATa:DIRection command.
  • .size: The SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:DATa:SIZe command.
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:DATa:VALue command.

direction property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:DATa:DIRection command.

Description
  • This command sets or queries the direction of the data for the I2C bus search to determine where to place a mark. The search number is specified by x. Read or write is indicated by the R/W bit in the I2C protocol.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:DATa:DIRection? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:DATa:DIRection? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:DATa:DIRection value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:DATa:DIRection {NOCARE|READ|WRITE}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:DATa:DIRection?
Info
  • NOCARE specifies the direction of data as Don’t Care.
  • READ specifies the direction of data as Read.
  • WRITE specifies the direction of data as Write.

size property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:DATa:SIZe command.

Description
  • This command sets or queries the length of the data string in bytes used for an I2C bus search to determine where to place a mark. The search number is specified by x. The search condition must be DATA or ADDRANDDATA.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:DATa:SIZe? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:DATa:SIZe? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:DATa:SIZe value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:DATa:SIZe <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:DATa:SIZe?
Info
  • <NR1> specifies the data size in bytes.

value property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:DATa:VALue command.

Description
  • This command sets or queries the binary data string used for I2C bus search to determine where to place a mark. The search number is specified by x. The search condition must be DATA or ADDRANDDATA.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:DATa:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:DATa:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:DATa:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:DATa:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:DATa:VALue?
Info
  • <QString> specifies the data value. The valid characters are 0, 1, or X for binary format; and A-F, 0-9, and X for hexadecimal format.

SearchSearchItemTriggerABusI2cDataDirection

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:DATa:DIRection command.

Description
  • This command sets or queries the direction of the data for the I2C bus search to determine where to place a mark. The search number is specified by x. Read or write is indicated by the R/W bit in the I2C protocol.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:DATa:DIRection? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:DATa:DIRection? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:DATa:DIRection value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:DATa:DIRection {NOCARE|READ|WRITE}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:DATa:DIRection?
Info
  • NOCARE specifies the direction of data as Don’t Care.
  • READ specifies the direction of data as Read.
  • WRITE specifies the direction of data as Write.

SearchSearchItemTriggerABusI2cDataSize

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:DATa:SIZe command.

Description
  • This command sets or queries the length of the data string in bytes used for an I2C bus search to determine where to place a mark. The search number is specified by x. The search condition must be DATA or ADDRANDDATA.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:DATa:SIZe? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:DATa:SIZe? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:DATa:SIZe value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:DATa:SIZe <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:DATa:SIZe?
Info
  • <NR1> specifies the data size in bytes.

SearchSearchItemTriggerABusI2cDataValue

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:DATa:VALue command.

Description
  • This command sets or queries the binary data string used for I2C bus search to determine where to place a mark. The search number is specified by x. The search condition must be DATA or ADDRANDDATA.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:DATa:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:DATa:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:DATa:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:DATa:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:DATa:VALue?
Info
  • <QString> specifies the data value. The valid characters are 0, 1, or X for binary format; and A-F, 0-9, and X for hexadecimal format.

SearchSearchItemTriggerABusI3c

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C? query and raise an AssertionError if the returned value does not match value.
Info
  • SEARCH<x> specifies the search number.
Properties
  • .address: The SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:ADDRess command tree.
  • .bcr: The SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:BCR command tree.
  • .bcrtype: The SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:BCRType command tree.
  • .bpackets: The SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:BPACKets command.
  • .brgtid: The SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:BRGTID command tree.
  • .ccode: The SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:CCODe command tree.
  • .condition: The SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:CONDition command.
  • .data: The SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:DATa command tree.
  • .dcr: The SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:DCR command tree.
  • .dcrtype: The SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:DCRType command tree.
  • .dword: The SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:DWORd command tree.
  • .errortype: The SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:ERRORTYPe command.
  • .eventbyte: The SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:EVENTBYTe command tree.
  • .freqbyte: The SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:FREQBYTe command tree.
  • .gslsb: The SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:GSLSb command tree.
  • .gsmsb: The SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:GSMSb command tree.
  • .id: The SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:ID command tree.
  • .inaccbyte: The SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:INACCBYTe command tree.
  • .maxread: The SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:MAXREAD command tree.
  • .maxrturn: The SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:MAXRTURN command tree.
  • .maxwrite: The SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:MAXWRITe command tree.
  • .packets: The SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:PACKets command.
  • .saddress: The SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:SADDress command tree.
  • .sdr: The SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:SDR command tree.
  • .statebyte: The SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:STATEBYTe command tree.
  • .static: The SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:STATic command tree.
  • .supportbyte: The SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:SUPPORTBYTe command tree.
  • .testmode: The SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:TESTMODe command tree.

address property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:ADDRess command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:ADDRess? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:ADDRess? query and raise an AssertionError if the returned value does not match value.
Info
  • SEARCH<x> specifies the search number.
Sub-properties
  • .mode: The SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:ADDRess:MODe command.
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:ADDRess:VALue command.

bcr property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:BCR command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:BCR? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:BCR? query and raise an AssertionError if the returned value does not match value.
Info
  • SEARCH<x> specifies the search number.
Sub-properties
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:BCR:VALue command.

bcrtype property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:BCRType command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:BCRType? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:BCRType? query and raise an AssertionError if the returned value does not match value.
Info
  • SEARCH<x> specifies the search number.
Sub-properties
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:BCRType:VALue command.

bpackets property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:BPACKets command.

Description
  • This command sets or queries the I3C Broadcast Packets search to Broadcast or Response. Requires purchase and installation of option SRI3C.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:BPACKets? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:BPACKets? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:BPACKets value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:BPACKets {RESPonse|BROadcast}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:BPACKets?
Info
  • SEARCH<x> specifies the search number.
  • RESPonse specifies the broadcast address mode as Response.
  • BROadcast specifies the broadcast address mode as Broadcast.

brgtid property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:BRGTID command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:BRGTID? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:BRGTID? query and raise an AssertionError if the returned value does not match value.
Info
  • SEARCH<x> specifies the search number.
Sub-properties
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:BRGTID:VALue command.

ccode property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:CCODe command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:CCODe? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:CCODe? query and raise an AssertionError if the returned value does not match value.
Info
  • SEARCH<x> specifies the search number.
Sub-properties
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:CCODe:VALue command.

condition property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:CONDition command.

Description
  • This command sets or queries the trigger condition for the specified I3C bus trigger search to determine where to place a mark. Requires purchase and installation of option SRI3C.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:CONDition? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:CONDition? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:CONDition value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:CONDition {STARt|REPEATStart|ADDRess|DATa|SDRDirect|SDRBroadcast|ERRors|HOTJoin|DMSGEnd|BMSGEnd|HDRRestart|HDRExit}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:CONDition?
Info
  • SEARCH<x> specifies the search number.
  • STARt specifies trigger condition as Start.
  • REPEATStart specifies trigger condition as Repeated Start.
  • ADDRess specifies trigger condition as Address.
  • DATa specifies trigger condition as Data.
  • SDRDirect specifies trigger condition as I3C SDR Direct.
  • SDRBroadcast specifies trigger condition as I3C SDR Broadcast.
  • ERRors specifies trigger condition as Errors.
  • HOTJoin specifies trigger condition as Hot-Join.
  • DMSGEnd specifies trigger condition as Direct Message End.
  • BMSGEnd specifies trigger condition as Stop.
  • HDRRestart specifies trigger condition as HDR Restart.
  • HDRExit specifies trigger condition as HDR Exit.

data property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:DATa command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:DATa? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:DATa? query and raise an AssertionError if the returned value does not match value.
Info
  • SEARCH<x> specifies the search number.
Sub-properties
  • .direction: The SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:DATa:DIRection command.
  • .size: The SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:DATa:SIZe command.
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:DATa:VALue command.

dcr property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:DCR command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:DCR? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:DCR? query and raise an AssertionError if the returned value does not match value.
Info
  • SEARCH<x> specifies the search number.
Sub-properties
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:DCR:VALue command.

dcrtype property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:DCRType command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:DCRType? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:DCRType? query and raise an AssertionError if the returned value does not match value.
Info
  • SEARCH<x> specifies the search number.
Sub-properties
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:DCRType:VALue command.

dword property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:DWORd command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:DWORd? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:DWORd? query and raise an AssertionError if the returned value does not match value.
Info
  • SEARCH<x> specifies the search number.
Sub-properties
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:DWORd:VALue command.

errortype property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:ERRORTYPe command.

Description
  • This command sets or queries the error type condition for the specified I3C bus search to determine where to place a mark. Requires purchase and installation of option SRI3C.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:ERRORTYPe? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:ERRORTYPe? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:ERRORTYPe value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:ERRORTYPe {NACK|TBIT|PARity|BADDr|DADDr|PREamble|CRC}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:ERRORTYPe?
Info
  • SEARCH<x> specifies the search number.
  • NACK specifies the error type on which to search as Missing Ack.
  • TBIT specifies the error type on which to search as T-Bit.
  • PARity specifies the error type on which to search as Parity.
  • BADDr specifies the error type on which to search as Broadcast Address.
  • DADDr specifies the error type on which to search as Dynamic Address.
  • PREamble specifies the error type on which to search as Preamble.
  • CRC specifies the error type on which to search as CRC.

eventbyte property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:EVENTBYTe command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:EVENTBYTe? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:EVENTBYTe? query and raise an AssertionError if the returned value does not match value.
Info
  • SEARCH<x> specifies the search number.
Sub-properties
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:EVENTBYTe:VALue command.

freqbyte property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:FREQBYTe command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:FREQBYTe? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:FREQBYTe? query and raise an AssertionError if the returned value does not match value.
Info
  • SEARCH<x> specifies the search number.
Sub-properties
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:FREQBYTe:VALue command.

gslsb property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:GSLSb command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:GSLSb? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:GSLSb? query and raise an AssertionError if the returned value does not match value.
Info
  • SEARCH<x> specifies the search number.
Sub-properties
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:GSLSb:VALue command.

gsmsb property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:GSMSb command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:GSMSb? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:GSMSb? query and raise an AssertionError if the returned value does not match value.
Info
  • SEARCH<x> specifies the search number.
Sub-properties
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:GSMSb:VALue command.

id property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:ID command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:ID? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:ID? query and raise an AssertionError if the returned value does not match value.
Info
  • SEARCH<x> specifies the search number.
Sub-properties
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:ID:VALue command.

inaccbyte property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:INACCBYTe command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:INACCBYTe? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:INACCBYTe? query and raise an AssertionError if the returned value does not match value.
Info
  • SEARCH<x> specifies the search number.
Sub-properties
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:INACCBYTe:VALue command.

maxread property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:MAXREAD command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:MAXREAD? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:MAXREAD? query and raise an AssertionError if the returned value does not match value.
Info
  • SEARCH<x> specifies the search number.
Sub-properties
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:MAXREAD:VALue command.

maxrturn property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:MAXRTURN command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:MAXRTURN? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:MAXRTURN? query and raise an AssertionError if the returned value does not match value.
Info
  • SEARCH<x> specifies the search number.
Sub-properties
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:MAXRTURN:VALue command.

maxwrite property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:MAXWRITe command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:MAXWRITe? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:MAXWRITe? query and raise an AssertionError if the returned value does not match value.
Info
  • SEARCH<x> specifies the search number.
Sub-properties
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:MAXWRITe:VALue command.

packets property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:PACKets command.

Description
  • This command sets or queries the I3C Direct Packets to Direct or Response. Requires purchase and installation of option SRI3C.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:PACKets? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:PACKets? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:PACKets value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:PACKets {RESPonse|DIRect}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:PACKets?
Info
  • SEARCH<x> specifies the search number.
  • RESPonse specifies the packet address mode as Response.
  • DIRec t specifies the packet address mode as Direct.

saddress property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:SADDress command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:SADDress? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:SADDress? query and raise an AssertionError if the returned value does not match value.
Info
  • SEARCH<x> specifies the search number.
Sub-properties
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:SADDress:VALue command.

sdr property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:SDR command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:SDR? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:SDR? query and raise an AssertionError if the returned value does not match value.
Info
  • SEARCH<x> specifies the search number.
Sub-properties
  • .broadcastpacket: The SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:SDR:BROADCASTPacket command.
  • .directpacket: The SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:SDR:DIRECTPacket command.

statebyte property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:STATEBYTe command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:STATEBYTe? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:STATEBYTe? query and raise an AssertionError if the returned value does not match value.
Info
  • SEARCH<x> specifies the search number.
Sub-properties
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:STATEBYTe:VALue command.

static property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:STATic command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:STATic? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:STATic? query and raise an AssertionError if the returned value does not match value.
Info
  • SEARCH<x> specifies the search number.
Sub-properties
  • .address: The SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:STATic:ADDRess command.

supportbyte property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:SUPPORTBYTe command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:SUPPORTBYTe? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:SUPPORTBYTe? query and raise an AssertionError if the returned value does not match value.
Info
  • SEARCH<x> specifies the search number.
Sub-properties
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:SUPPORTBYTe:VALue command.

testmode property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:TESTMODe command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:TESTMODe? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:TESTMODe? query and raise an AssertionError if the returned value does not match value.
Info
  • SEARCH<x> specifies the search number.
Sub-properties
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:TESTMODe:VALue command.

SearchSearchItemTriggerABusI3cAddress

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:ADDRess command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:ADDRess? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:ADDRess? query and raise an AssertionError if the returned value does not match value.
Info
  • SEARCH<x> specifies the search number.
Properties
  • .mode: The SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:ADDRess:MODe command.
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:ADDRess:VALue command.

mode property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:ADDRess:MODe command.

Description
  • This command sets or queries the address mode for the specified I3C bus trigger search to determine where to place a search mark. Requires purchase and installation of option SRI3C.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:ADDRess:MODe? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:ADDRess:MODe? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:ADDRess:MODe value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:ADDRess:MODe {ADDR10|ADDR7}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:ADDRess:MODe?
Info
  • SEARCH<x> specifies the search number.
  • ADDR10 specifies the address mode as ADDR10.
  • ADDR7 specifies the address mode as ADDR7.

value property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:ADDRess:VALue command.

Description
  • This command sets or queries the I3C address value for which to search, to determine where to place a search mark. Requires purchase and installation of option SRI3C.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:ADDRess:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:ADDRess:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:ADDRess:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:ADDRess:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:ADDRess:VALue?
Info
  • SEARCH<x> specifies the search number.
  • <QString> specifies the address value for the specified Search . This is either a 7-bit or 10-bit value depending on the address mode. The valid characters are 0-9, A-F, and X for Hexadecimal address format; and 0, 1, and X (don’t care) for Binary address format.

SearchSearchItemTriggerABusI3cAddressMode

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:ADDRess:MODe command.

Description
  • This command sets or queries the address mode for the specified I3C bus trigger search to determine where to place a search mark. Requires purchase and installation of option SRI3C.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:ADDRess:MODe? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:ADDRess:MODe? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:ADDRess:MODe value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:ADDRess:MODe {ADDR10|ADDR7}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:ADDRess:MODe?
Info
  • SEARCH<x> specifies the search number.
  • ADDR10 specifies the address mode as ADDR10.
  • ADDR7 specifies the address mode as ADDR7.

SearchSearchItemTriggerABusI3cAddressValue

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:ADDRess:VALue command.

Description
  • This command sets or queries the I3C address value for which to search, to determine where to place a search mark. Requires purchase and installation of option SRI3C.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:ADDRess:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:ADDRess:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:ADDRess:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:ADDRess:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:ADDRess:VALue?
Info
  • SEARCH<x> specifies the search number.
  • <QString> specifies the address value for the specified Search . This is either a 7-bit or 10-bit value depending on the address mode. The valid characters are 0-9, A-F, and X for Hexadecimal address format; and 0, 1, and X (don’t care) for Binary address format.

SearchSearchItemTriggerABusI3cBcr

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:BCR command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:BCR? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:BCR? query and raise an AssertionError if the returned value does not match value.
Info
  • SEARCH<x> specifies the search number.
Properties
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:BCR:VALue command.

value property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:BCR:VALue command.

Description
  • This command sets or queries the binary field string used for the I3C search if the trigger condition is BCR. Requires purchase and installation of option SRI3C.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:BCR:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:BCR:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:BCR:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:BCR:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:BCR:VALue?
Info
  • SEARCH<x> specifies the search number.
  • <QString> specifies the value for which to search. The valid characters are 0, 1, or X for Binary format; and 0-9, A-F, and X for Hexadecimal format.

SearchSearchItemTriggerABusI3cBcrValue

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:BCR:VALue command.

Description
  • This command sets or queries the binary field string used for the I3C search if the trigger condition is BCR. Requires purchase and installation of option SRI3C.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:BCR:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:BCR:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:BCR:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:BCR:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:BCR:VALue?
Info
  • SEARCH<x> specifies the search number.
  • <QString> specifies the value for which to search. The valid characters are 0, 1, or X for Binary format; and 0-9, A-F, and X for Hexadecimal format.

SearchSearchItemTriggerABusI3cBcrtype

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:BCRType command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:BCRType? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:BCRType? query and raise an AssertionError if the returned value does not match value.
Info
  • SEARCH<x> specifies the search number.
Properties
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:BCRType:VALue command.

value property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:BCRType:VALue command.

Description
  • This command sets or queries the binary field string used for the I3C bus search if the trigger condition is BCRTYPE. Requires purchase and installation of option SRI3C.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:BCRType:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:BCRType:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:BCRType:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:BCRType:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:BCRType:VALue?
Info
  • SEARCH<x> specifies the search number.
  • <QString> specifies the data value for which to search. The valid characters are 0, 1, or X for Binary format; and 0-9, A-F, and X for Hexadecimal format.

SearchSearchItemTriggerABusI3cBcrtypeValue

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:BCRType:VALue command.

Description
  • This command sets or queries the binary field string used for the I3C bus search if the trigger condition is BCRTYPE. Requires purchase and installation of option SRI3C.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:BCRType:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:BCRType:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:BCRType:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:BCRType:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:BCRType:VALue?
Info
  • SEARCH<x> specifies the search number.
  • <QString> specifies the data value for which to search. The valid characters are 0, 1, or X for Binary format; and 0-9, A-F, and X for Hexadecimal format.

SearchSearchItemTriggerABusI3cBpackets

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:BPACKets command.

Description
  • This command sets or queries the I3C Broadcast Packets search to Broadcast or Response. Requires purchase and installation of option SRI3C.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:BPACKets? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:BPACKets? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:BPACKets value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:BPACKets {RESPonse|BROadcast}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:BPACKets?
Info
  • SEARCH<x> specifies the search number.
  • RESPonse specifies the broadcast address mode as Response.
  • BROadcast specifies the broadcast address mode as Broadcast.

SearchSearchItemTriggerABusI3cBrgtid

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:BRGTID command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:BRGTID? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:BRGTID? query and raise an AssertionError if the returned value does not match value.
Info
  • SEARCH<x> specifies the search number.
Properties
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:BRGTID:VALue command.

value property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:BRGTID:VALue command.

Description
  • This command sets or queries the binary field string used for the I3C trigger if the trigger condition is SETBRGTGT packet ID. Requires purchase and installation of option SRI3C.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:BRGTID:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:BRGTID:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:BRGTID:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:BRGTID:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:BRGTID:VALue?
Info
  • SEARCH<x> specifies the search number.
  • <QString> specifies the value for which to search. The valid characters are 0, 1, or X for Binary format; and 0-9, A-F, and X for Hexadecimal format.

SearchSearchItemTriggerABusI3cBrgtidValue

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:BRGTID:VALue command.

Description
  • This command sets or queries the binary field string used for the I3C trigger if the trigger condition is SETBRGTGT packet ID. Requires purchase and installation of option SRI3C.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:BRGTID:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:BRGTID:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:BRGTID:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:BRGTID:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:BRGTID:VALue?
Info
  • SEARCH<x> specifies the search number.
  • <QString> specifies the value for which to search. The valid characters are 0, 1, or X for Binary format; and 0-9, A-F, and X for Hexadecimal format.

SearchSearchItemTriggerABusI3cCcode

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:CCODe command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:CCODe? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:CCODe? query and raise an AssertionError if the returned value does not match value.
Info
  • SEARCH<x> specifies the search number.
Properties
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:CCODe:VALue command.

value property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:CCODe:VALue command.

Description
  • This command sets or queries the binary field string used for the I3C trigger if the trigger condition is SETBRGTGT packet ID. Requires purchase and installation of option SRI3C.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:CCODe:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:CCODe:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:CCODe:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:CCODe:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:CCODe:VALue?
Info
  • SEARCH<x> specifies the search number.
  • <QString> specifies the value for which to search. The valid characters are 0, 1, or X for Binary format; and A-F, 0-9, and X for Hexadecimal format.

SearchSearchItemTriggerABusI3cCcodeValue

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:CCODe:VALue command.

Description
  • This command sets or queries the binary field string used for the I3C trigger if the trigger condition is SETBRGTGT packet ID. Requires purchase and installation of option SRI3C.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:CCODe:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:CCODe:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:CCODe:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:CCODe:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:CCODe:VALue?
Info
  • SEARCH<x> specifies the search number.
  • <QString> specifies the value for which to search. The valid characters are 0, 1, or X for Binary format; and A-F, 0-9, and X for Hexadecimal format.

SearchSearchItemTriggerABusI3cCondition

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:CONDition command.

Description
  • This command sets or queries the trigger condition for the specified I3C bus trigger search to determine where to place a mark. Requires purchase and installation of option SRI3C.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:CONDition? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:CONDition? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:CONDition value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:CONDition {STARt|REPEATStart|ADDRess|DATa|SDRDirect|SDRBroadcast|ERRors|HOTJoin|DMSGEnd|BMSGEnd|HDRRestart|HDRExit}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:CONDition?
Info
  • SEARCH<x> specifies the search number.
  • STARt specifies trigger condition as Start.
  • REPEATStart specifies trigger condition as Repeated Start.
  • ADDRess specifies trigger condition as Address.
  • DATa specifies trigger condition as Data.
  • SDRDirect specifies trigger condition as I3C SDR Direct.
  • SDRBroadcast specifies trigger condition as I3C SDR Broadcast.
  • ERRors specifies trigger condition as Errors.
  • HOTJoin specifies trigger condition as Hot-Join.
  • DMSGEnd specifies trigger condition as Direct Message End.
  • BMSGEnd specifies trigger condition as Stop.
  • HDRRestart specifies trigger condition as HDR Restart.
  • HDRExit specifies trigger condition as HDR Exit.

SearchSearchItemTriggerABusI3cData

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:DATa command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:DATa? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:DATa? query and raise an AssertionError if the returned value does not match value.
Info
  • SEARCH<x> specifies the search number.
Properties
  • .direction: The SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:DATa:DIRection command.
  • .size: The SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:DATa:SIZe command.
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:DATa:VALue command.

direction property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:DATa:DIRection command.

Description
  • This command sets or queries the direction of the data for the I3C bus trigger search to determine where to place a mark. Requires purchase and installation of option SRI3C.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:DATa:DIRection? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:DATa:DIRection? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:DATa:DIRection value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:DATa:DIRection {NOCARE|READ|WRITE}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:DATa:DIRection?
Info
  • SEARCH<x> specifies the search number.
  • NOCARE specifies the data direction for which to search is Don’t Care.
  • READ specifies the data direction for which to search is Read.
  • WRITE specifies the data direction for which to search is Write.

size property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:DATa:SIZe command.

Description
  • This command sets or queries the length of the data string in bytes used for the specified I3C bus trigger search to determine where to place a mark.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:DATa:SIZe? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:DATa:SIZe? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:DATa:SIZe value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:DATa:SIZe <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:DATa:SIZe?
Info
  • SEARCH<x> specifies the search number.
  • <NR1> specifies the data size in bytes.

value property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:DATa:VALue command.

Description
  • This command sets or queries the data value of the data token for the specified I3C bus trigger search to determine where to place a mark. Requires purchase and installation of option SRI3C.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:DATa:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:DATa:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:DATa:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:DATa:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:DATa:VALue?
Info
  • SEARCH<x> specifies the search number.
  • <QString> specifies the data value. The valid characters are 0, 1, or X for Binary format; and A-F, 0-9, and X for Hexadecimal format.

SearchSearchItemTriggerABusI3cDataDirection

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:DATa:DIRection command.

Description
  • This command sets or queries the direction of the data for the I3C bus trigger search to determine where to place a mark. Requires purchase and installation of option SRI3C.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:DATa:DIRection? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:DATa:DIRection? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:DATa:DIRection value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:DATa:DIRection {NOCARE|READ|WRITE}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:DATa:DIRection?
Info
  • SEARCH<x> specifies the search number.
  • NOCARE specifies the data direction for which to search is Don’t Care.
  • READ specifies the data direction for which to search is Read.
  • WRITE specifies the data direction for which to search is Write.

SearchSearchItemTriggerABusI3cDataSize

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:DATa:SIZe command.

Description
  • This command sets or queries the length of the data string in bytes used for the specified I3C bus trigger search to determine where to place a mark.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:DATa:SIZe? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:DATa:SIZe? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:DATa:SIZe value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:DATa:SIZe <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:DATa:SIZe?
Info
  • SEARCH<x> specifies the search number.
  • <NR1> specifies the data size in bytes.

SearchSearchItemTriggerABusI3cDataValue

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:DATa:VALue command.

Description
  • This command sets or queries the data value of the data token for the specified I3C bus trigger search to determine where to place a mark. Requires purchase and installation of option SRI3C.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:DATa:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:DATa:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:DATa:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:DATa:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:DATa:VALue?
Info
  • SEARCH<x> specifies the search number.
  • <QString> specifies the data value. The valid characters are 0, 1, or X for Binary format; and A-F, 0-9, and X for Hexadecimal format.

SearchSearchItemTriggerABusI3cDcr

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:DCR command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:DCR? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:DCR? query and raise an AssertionError if the returned value does not match value.
Info
  • SEARCH<x> specifies the search number.
Properties
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:DCR:VALue command.

value property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:DCR:VALue command.

Description
  • This command sets or queries the binary field string used for the I3C bus search if the trigger condition is DCR. Requires purchase and installation of option SRI3C.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:DCR:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:DCR:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:DCR:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:DCR:VALue <QString
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:DCR:VALue?
Info
  • SEARCH<x> specifies the search number.
  • <QString> specifies the value for which to search. The valid characters are 0, 1, or X for Binary format; and 0-9, A-F, and X for Hexadecimal format.

SearchSearchItemTriggerABusI3cDcrValue

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:DCR:VALue command.

Description
  • This command sets or queries the binary field string used for the I3C bus search if the trigger condition is DCR. Requires purchase and installation of option SRI3C.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:DCR:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:DCR:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:DCR:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:DCR:VALue <QString
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:DCR:VALue?
Info
  • SEARCH<x> specifies the search number.
  • <QString> specifies the value for which to search. The valid characters are 0, 1, or X for Binary format; and 0-9, A-F, and X for Hexadecimal format.

SearchSearchItemTriggerABusI3cDcrtype

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:DCRType command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:DCRType? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:DCRType? query and raise an AssertionError if the returned value does not match value.
Info
  • SEARCH<x> specifies the search number.
Properties
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:DCRType:VALue command.

value property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:DCRType:VALue command.

Description
  • This command sets or queries the binary field string used for the I3C bus search if the trigger condition is DCRTYPE. Requires purchase and installation of option SRI3C.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:DCRType:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:DCRType:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:DCRType:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:DCRType:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:DCRType:VALue?
Info
  • SEARCH<x> specifies the search number.
  • <QString> specifies the data value for which to search. The valid characters are 0, 1, or X for Binary format; and 0-9, A-F, and X for Hexadecimal format.

SearchSearchItemTriggerABusI3cDcrtypeValue

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:DCRType:VALue command.

Description
  • This command sets or queries the binary field string used for the I3C bus search if the trigger condition is DCRTYPE. Requires purchase and installation of option SRI3C.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:DCRType:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:DCRType:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:DCRType:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:DCRType:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:DCRType:VALue?
Info
  • SEARCH<x> specifies the search number.
  • <QString> specifies the data value for which to search. The valid characters are 0, 1, or X for Binary format; and 0-9, A-F, and X for Hexadecimal format.

SearchSearchItemTriggerABusI3cDword

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:DWORd command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:DWORd? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:DWORd? query and raise an AssertionError if the returned value does not match value.
Info
  • SEARCH<x> specifies the search number.
Properties
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:DWORd:VALue command.

value property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:DWORd:VALue command.

Description
  • This command sets or queries the binary field string used for the I3C trigger if the trigger condition is DATAWORDS. Requires purchase and installation of option SRI3C.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:DWORd:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:DWORd:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:DWORd:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:DWORd:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:DWORd:VALue?
Info
  • SEARCH<x> specifies the search number.
  • <QString> specifies the value for which to search. The valid characters are 0, 1, or X for Binary format; and 0-9, A-F, and X for Hexadecimal format.

SearchSearchItemTriggerABusI3cDwordValue

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:DWORd:VALue command.

Description
  • This command sets or queries the binary field string used for the I3C trigger if the trigger condition is DATAWORDS. Requires purchase and installation of option SRI3C.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:DWORd:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:DWORd:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:DWORd:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:DWORd:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:DWORd:VALue?
Info
  • SEARCH<x> specifies the search number.
  • <QString> specifies the value for which to search. The valid characters are 0, 1, or X for Binary format; and 0-9, A-F, and X for Hexadecimal format.

SearchSearchItemTriggerABusI3cErrortype

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:ERRORTYPe command.

Description
  • This command sets or queries the error type condition for the specified I3C bus search to determine where to place a mark. Requires purchase and installation of option SRI3C.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:ERRORTYPe? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:ERRORTYPe? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:ERRORTYPe value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:ERRORTYPe {NACK|TBIT|PARity|BADDr|DADDr|PREamble|CRC}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:ERRORTYPe?
Info
  • SEARCH<x> specifies the search number.
  • NACK specifies the error type on which to search as Missing Ack.
  • TBIT specifies the error type on which to search as T-Bit.
  • PARity specifies the error type on which to search as Parity.
  • BADDr specifies the error type on which to search as Broadcast Address.
  • DADDr specifies the error type on which to search as Dynamic Address.
  • PREamble specifies the error type on which to search as Preamble.
  • CRC specifies the error type on which to search as CRC.

SearchSearchItemTriggerABusI3cEventbyte

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:EVENTBYTe command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:EVENTBYTe? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:EVENTBYTe? query and raise an AssertionError if the returned value does not match value.
Info
  • SEARCH<x> specifies the search number.
Properties
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:EVENTBYTe:VALue command.

value property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:EVENTBYTe:VALue command.

Description
  • This command sets or queries the binary field string used for the I3C trigger if the trigger condition is EVENTBYTE. Requires purchase and installation of option SRI3C.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:EVENTBYTe:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:EVENTBYTe:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:EVENTBYTe:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:EVENTBYTe:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:EVENTBYTe:VALue?
Info
  • SEARCH<x> specifies the search number.
  • <QString> specifies the value for which to search. The valid characters are 0, 1, or X for Binary format; and 0-9, A-F, and X for Hexadecimal format.

SearchSearchItemTriggerABusI3cEventbyteValue

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:EVENTBYTe:VALue command.

Description
  • This command sets or queries the binary field string used for the I3C trigger if the trigger condition is EVENTBYTE. Requires purchase and installation of option SRI3C.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:EVENTBYTe:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:EVENTBYTe:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:EVENTBYTe:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:EVENTBYTe:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:EVENTBYTe:VALue?
Info
  • SEARCH<x> specifies the search number.
  • <QString> specifies the value for which to search. The valid characters are 0, 1, or X for Binary format; and 0-9, A-F, and X for Hexadecimal format.

SearchSearchItemTriggerABusI3cFreqbyte

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:FREQBYTe command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:FREQBYTe? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:FREQBYTe? query and raise an AssertionError if the returned value does not match value.
Info
  • SEARCH<x> specifies the search number.
Properties
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:FREQBYTe:VALue command.

value property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:FREQBYTe:VALue command.

Description
  • This command sets or queries the binary field string used for the I3C trigger if the trigger condition is FREQUENCYBYTE. Requires purchase and installation of option SRI3C.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:FREQBYTe:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:FREQBYTe:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:FREQBYTe:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:FREQBYTe:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:FREQBYTe:VALue?
Info
  • SEARCH<x> specifies the search number.
  • <QString> specifies the value for which to search. The valid characters are 0, 1, or X for Binary format; and 0-9, A-F, and X for Hexadecimal format.

SearchSearchItemTriggerABusI3cFreqbyteValue

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:FREQBYTe:VALue command.

Description
  • This command sets or queries the binary field string used for the I3C trigger if the trigger condition is FREQUENCYBYTE. Requires purchase and installation of option SRI3C.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:FREQBYTe:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:FREQBYTe:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:FREQBYTe:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:FREQBYTe:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:FREQBYTe:VALue?
Info
  • SEARCH<x> specifies the search number.
  • <QString> specifies the value for which to search. The valid characters are 0, 1, or X for Binary format; and 0-9, A-F, and X for Hexadecimal format.

SearchSearchItemTriggerABusI3cGslsb

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:GSLSb command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:GSLSb? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:GSLSb? query and raise an AssertionError if the returned value does not match value.
Info
  • SEARCH<x> specifies the search number.
Properties
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:GSLSb:VALue command.

value property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:GSLSb:VALue command.

Description
  • This command sets or queries the binary field string used for the I3C trigger if the trigger condition is GETSTATUSLSB. Requires purchase and installation of option SRI3C.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:GSLSb:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:GSLSb:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:GSLSb:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:GSLSb:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:GSLSb:VALue?
Info
  • SEARCH<x> specifies the search number.
  • <QString> specifies the value for which to search. The valid characters are 0, 1, or X for Binary format; and 0-9, A-F, and X for Hexadecimal format.

SearchSearchItemTriggerABusI3cGslsbValue

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:GSLSb:VALue command.

Description
  • This command sets or queries the binary field string used for the I3C trigger if the trigger condition is GETSTATUSLSB. Requires purchase and installation of option SRI3C.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:GSLSb:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:GSLSb:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:GSLSb:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:GSLSb:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:GSLSb:VALue?
Info
  • SEARCH<x> specifies the search number.
  • <QString> specifies the value for which to search. The valid characters are 0, 1, or X for Binary format; and 0-9, A-F, and X for Hexadecimal format.

SearchSearchItemTriggerABusI3cGsmsb

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:GSMSb command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:GSMSb? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:GSMSb? query and raise an AssertionError if the returned value does not match value.
Info
  • SEARCH<x> specifies the search number.
Properties
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:GSMSb:VALue command.

value property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:GSMSb:VALue command.

Description
  • This command sets or queries the binary field string used for the I3C trigger if the trigger condition is GETSTATUSMSB. Requires purchase and installation of option SRI3C.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:GSMSb:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:GSMSb:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:GSMSb:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:GSMSb:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:GSMSb:VALue?
Info
  • SEARCH<x> specifies the search number.
  • <QString> specifies the value for which to search. The valid characters are 0, 1, or X for Binary format; and 0-9, A-F, and X for Hexadecimal format.

SearchSearchItemTriggerABusI3cGsmsbValue

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:GSMSb:VALue command.

Description
  • This command sets or queries the binary field string used for the I3C trigger if the trigger condition is GETSTATUSMSB. Requires purchase and installation of option SRI3C.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:GSMSb:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:GSMSb:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:GSMSb:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:GSMSb:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:GSMSb:VALue?
Info
  • SEARCH<x> specifies the search number.
  • <QString> specifies the value for which to search. The valid characters are 0, 1, or X for Binary format; and 0-9, A-F, and X for Hexadecimal format.

SearchSearchItemTriggerABusI3cId

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:ID command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:ID? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:ID? query and raise an AssertionError if the returned value does not match value.
Info
  • SEARCH<x> specifies the search number.
Properties
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:ID:VALue command.

value property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:ID:VALue command.

Description
  • This command sets or queries the binary field string used for the I3C search if the trigger condition is ENTDAA packet ID. Requires purchase and installation of option SRI3C.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:ID:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:ID:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:ID:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:ID:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:ID:VALue?
Info
  • SEARCH<x> specifies the search number.
  • <QString> specifies the value for which to search. The valid characters are 0, 1, or X for Binary format; and 0-9, A-F, and X for Hexadecimal format.

SearchSearchItemTriggerABusI3cIdValue

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:ID:VALue command.

Description
  • This command sets or queries the binary field string used for the I3C search if the trigger condition is ENTDAA packet ID. Requires purchase and installation of option SRI3C.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:ID:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:ID:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:ID:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:ID:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:ID:VALue?
Info
  • SEARCH<x> specifies the search number.
  • <QString> specifies the value for which to search. The valid characters are 0, 1, or X for Binary format; and 0-9, A-F, and X for Hexadecimal format.

SearchSearchItemTriggerABusI3cInaccbyte

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:INACCBYTe command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:INACCBYTe? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:INACCBYTe? query and raise an AssertionError if the returned value does not match value.
Info
  • SEARCH<x> specifies the search number.
Properties
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:INACCBYTe:VALue command.

value property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:INACCBYTe:VALue command.

Description
  • This command sets or queries the binary field string used for the I3C search if the trigger condition is INACCURACYBYTE. Requires purchase and installation of option SRI3C.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:INACCBYTe:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:INACCBYTe:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:INACCBYTe:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:INACCBYTe:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:INACCBYTe:VALue?
Info
  • SEARCH<x> specifies the search number.
  • <QString> specifies the value for which to search. The valid characters are 0, 1, or X for Binary format; and 0-9, A-F, and X for Hexadecimal format.

SearchSearchItemTriggerABusI3cInaccbyteValue

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:INACCBYTe:VALue command.

Description
  • This command sets or queries the binary field string used for the I3C search if the trigger condition is INACCURACYBYTE. Requires purchase and installation of option SRI3C.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:INACCBYTe:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:INACCBYTe:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:INACCBYTe:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:INACCBYTe:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:INACCBYTe:VALue?
Info
  • SEARCH<x> specifies the search number.
  • <QString> specifies the value for which to search. The valid characters are 0, 1, or X for Binary format; and 0-9, A-F, and X for Hexadecimal format.

SearchSearchItemTriggerABusI3cMaxread

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:MAXREAD command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:MAXREAD? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:MAXREAD? query and raise an AssertionError if the returned value does not match value.
Info
  • SEARCH<x> specifies the search number.
Properties
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:MAXREAD:VALue command.

value property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:MAXREAD:VALue command.

Description
  • This command sets or queries the binary field string used for the I3C trigger if the trigger condition is MAXREAD. Requires purchase and installation of option SRI3C.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:MAXREAD:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:MAXREAD:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:MAXREAD:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:MAXREAD:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:MAXREAD:VALue?
Info
  • SEARCH<x> specifies the search number.
  • <QString> specifies the value for which to search. The valid characters are 0, 1, or X for Binary format; and 0-9, A-F, and X for Hexadecimal format.

SearchSearchItemTriggerABusI3cMaxreadValue

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:MAXREAD:VALue command.

Description
  • This command sets or queries the binary field string used for the I3C trigger if the trigger condition is MAXREAD. Requires purchase and installation of option SRI3C.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:MAXREAD:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:MAXREAD:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:MAXREAD:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:MAXREAD:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:MAXREAD:VALue?
Info
  • SEARCH<x> specifies the search number.
  • <QString> specifies the value for which to search. The valid characters are 0, 1, or X for Binary format; and 0-9, A-F, and X for Hexadecimal format.

SearchSearchItemTriggerABusI3cMaxrturn

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:MAXRTURN command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:MAXRTURN? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:MAXRTURN? query and raise an AssertionError if the returned value does not match value.
Info
  • SEARCH<x> specifies the search number.
Properties
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:MAXRTURN:VALue command.

value property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:MAXRTURN:VALue command.

Description
  • This command sets or queries the binary field string used for the I3C trigger if the trigger condition is MAXREADTURN. Requires purchase and installation of option SRI3C.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:MAXRTURN:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:MAXRTURN:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:MAXRTURN:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:MAXRTURN:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:MAXRTURN:VALue?
Info
  • SEARCH<x> specifies the search number.
  • <QString> specifies the value for which to search. The valid characters are 0, 1, or X for Binary format; and 0-9, A-F, and X for Hexadecimal format.

SearchSearchItemTriggerABusI3cMaxrturnValue

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:MAXRTURN:VALue command.

Description
  • This command sets or queries the binary field string used for the I3C trigger if the trigger condition is MAXREADTURN. Requires purchase and installation of option SRI3C.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:MAXRTURN:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:MAXRTURN:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:MAXRTURN:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:MAXRTURN:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:MAXRTURN:VALue?
Info
  • SEARCH<x> specifies the search number.
  • <QString> specifies the value for which to search. The valid characters are 0, 1, or X for Binary format; and 0-9, A-F, and X for Hexadecimal format.

SearchSearchItemTriggerABusI3cMaxwrite

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:MAXWRITe command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:MAXWRITe? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:MAXWRITe? query and raise an AssertionError if the returned value does not match value.
Info
  • SEARCH<x> specifies the search number.
Properties
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:MAXWRITe:VALue command.

value property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:MAXWRITe:VALue command.

Description
  • This command sets or queries the binary field string used for the I3C trigger if the trigger condition is MAXWRITE. Requires purchase and installation of option SRI3C.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:MAXWRITe:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:MAXWRITe:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:MAXWRITe:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:MAXWRITe:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:MAXWRITe:VALue?
Info
  • SEARCH<x> specifies the search number.
  • <QString> specifies the value for which to search. The valid characters are 0, 1, or X for Binary format; and 0-9, A-F, and X for Hexadecimal format.

SearchSearchItemTriggerABusI3cMaxwriteValue

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:MAXWRITe:VALue command.

Description
  • This command sets or queries the binary field string used for the I3C trigger if the trigger condition is MAXWRITE. Requires purchase and installation of option SRI3C.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:MAXWRITe:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:MAXWRITe:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:MAXWRITe:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:MAXWRITe:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:MAXWRITe:VALue?
Info
  • SEARCH<x> specifies the search number.
  • <QString> specifies the value for which to search. The valid characters are 0, 1, or X for Binary format; and 0-9, A-F, and X for Hexadecimal format.

SearchSearchItemTriggerABusI3cPackets

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:PACKets command.

Description
  • This command sets or queries the I3C Direct Packets to Direct or Response. Requires purchase and installation of option SRI3C.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:PACKets? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:PACKets? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:PACKets value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:PACKets {RESPonse|DIRect}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:PACKets?
Info
  • SEARCH<x> specifies the search number.
  • RESPonse specifies the packet address mode as Response.
  • DIRec t specifies the packet address mode as Direct.

SearchSearchItemTriggerABusI3cSaddress

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:SADDress command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:SADDress? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:SADDress? query and raise an AssertionError if the returned value does not match value.
Info
  • SEARCH<x> specifies the search number.
Properties
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:SADDress:VALue command.

value property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:SADDress:VALue command.

Description
  • This command sets or queries the binary field string used for the I3C bus searchif the trigger condition is SLAVEADDRESS. Requires purchase and installation of option SRI3C.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:SADDress:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:SADDress:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:SADDress:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:SADDress:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:SADDress:VALue?
Info
  • SEARCH<x> specifies the search number.
  • <QString> specifies the address value for which to search. The valid characters are 0, 1, or X for Binary format; and A-F, 0-9, and X for Hexadecimal format.

SearchSearchItemTriggerABusI3cSaddressValue

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:SADDress:VALue command.

Description
  • This command sets or queries the binary field string used for the I3C bus searchif the trigger condition is SLAVEADDRESS. Requires purchase and installation of option SRI3C.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:SADDress:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:SADDress:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:SADDress:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:SADDress:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:SADDress:VALue?
Info
  • SEARCH<x> specifies the search number.
  • <QString> specifies the address value for which to search. The valid characters are 0, 1, or X for Binary format; and A-F, 0-9, and X for Hexadecimal format.

SearchSearchItemTriggerABusI3cSdr

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:SDR command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:SDR? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:SDR? query and raise an AssertionError if the returned value does not match value.
Info
  • SEARCH<x> specifies the search number.
Properties
  • .broadcastpacket: The SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:SDR:BROADCASTPacket command.
  • .directpacket: The SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:SDR:DIRECTPacket command.

broadcastpacket property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:SDR:BROADCASTPacket command.

Description
  • This command sets or queries the SDR broadcast packets for the specified I3C bus trigger search to determine where to place a mark.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:SDR:BROADCASTPacket? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:SDR:BROADCASTPacket? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:SDR:BROADCASTPacket value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:SDR:BROADCASTPacket {ENSLave|DISLave|ENTasx|RSTDya|ENTRDya|SETMwrl|SETMrdl|LSLave|ENTRTSTMode|EXTime|SETaasa|ENDXFER|SETGRPa|RSTACT|DEFGRPa|RSTGRPa|MLANe|SETBUSCON}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:SDR:BROADCASTPacket?
Info
  • SEARCH<x> specifies the search number.
  • ENSLave specifies the I3C broadcast packet type as Enable Slave.
  • DISLave specifies the I3C broadcast packet type as Disable Slave.
  • ENTasx specifies the I3C broadcast packet type as Enter Activity State.
  • RSTDya specifies the I3C broadcast packet type as Reset Dynamic Address.
  • ENTRDya specifies the I3C broadcast packet type as Enter Dynamic Address.
  • SETMwrl specifies the I3C broadcast packet type as Set Max Write Length.
  • SETMrdl specifies the I3C broadcast packet type as Set Max Read Length.
  • LSLave specifies the I3C broadcast packet type as Define List of Slaves.
  • ENTRTSTMode specifies the I3C broadcast packet type as Enter Test Mode Broadcast.
  • EXTime specifies the I3C broadcast packet type as Set Exchange Time.
  • SETaasa specifies the I3C broadcast packet type as Set Static As Dynamic Address.
  • ENDXFER specifies the I3C broadcast packet type as Data Transfer Ending Procedure Control.
  • SETGRPa specifies the I3C broadcast packet type as Set Group Address.
  • RSTACT specifies the I3C broadcast packet type as Slave Reset Action.
  • DEFGRPa specifies the I3C broadcast packet type as Define List of Group Addresses.
  • RSTGRPa specifies the I3C broadcast packet type as Reset Group Address.
  • MLANe specifies the I3C broadcast packet type as Multi-Lane Data Transfer Control.
  • SETBUSCON specifies the I3C broadcast packet type as Set Bus Context.

directpacket property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:SDR:DIRECTPacket command.

Description
  • This command sets or queries the SDR direct packet types for the specified I3C bus trigger search to determine where to place a mark. Requires purchase and installation of option SRI3C.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:SDR:DIRECTPacket? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:SDR:DIRECTPacket? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:SDR:DIRECTPacket value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:SDR:DIRECTPacket {ENSLave|DISLave|ENTasx|RSTDya|SETMwrl|SETMrdl|SEText|SETDya|SETNdya|GETMWrl|GETMRdl|GETPrid|GETBusch|GETDevch|GETSlave|ACCM|SETBrt|MDATASpeed|HDRCapability|GETXTime|GETCAPS|ENDXFER|SETGRPa|RSTACT|DEFGRPa|RSTGRPa|MLANe}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:SDR:DIRECTPacket?
Info
  • SEARCH<x> specifies the search number.
  • ENSLave specifies the trigger condition as Enable Slave.
  • DISLave specifies the trigger condition as Disable Slave.
  • ENTasx specifies the trigger condition as Enter Activity State.
  • RSTDya specifies the trigger condition as Reset Dynamic Address.
  • SETMwrl specifies the trigger condition as Set Max Write Length.
  • SETMrdl specifies the trigger condition as Set Max Read Length.
  • SEText specifies the trigger condition as Set Exchange Time.
  • SETDya specifies the trigger condition as Set Dynamic Address.
  • SETNdya specifies the trigger condition as Set New Dynamic Address.
  • GETMWrl specifies the trigger condition as Get Max Write Length.
  • GETMRdl specifies the trigger condition as Get Max Read Length.
  • GETPrid specifies the trigger condition as Get Provisional ID.
  • GETBusch specifies the trigger condition as Get Provisional ID.
  • GETDevch specifies the trigger condition as Get Dev Characteristics.
  • GETSlave specifies the trigger condition as Get Slave Current Status.
  • ACCM specifies the trigger condition as Get Accept Mastership.
  • SETBrt specifies the trigger condition as Set Bridge Direct Target.
  • MDATASpeed specifies the trigger condition as Get Max Data Speed.
  • HDRCapability specifies the trigger condition as Get HDR Capability.
  • GETXTime specifies the trigger condition as Get Exchange Time.
  • GETCAPS specifies the trigger condition as Get Optional Feature Capabilities.
  • ENDXFER specifies the trigger condition as Data Transfer Ending Procedure Control.
  • SETGRPa specifies the trigger condition as Set Group Address.
  • RSTACT specifies the trigger condition as Reset Group Address.
  • DEFGRPa specifies the trigger condition as Define List of Group Addresses.
  • RSTGRPa specifies the trigger condition as Reset Group Address.
  • MLANe specifies the trigger condition as Multi-Lane Data Transfer Control.

SearchSearchItemTriggerABusI3cSdrBroadcastpacket

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:SDR:BROADCASTPacket command.

Description
  • This command sets or queries the SDR broadcast packets for the specified I3C bus trigger search to determine where to place a mark.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:SDR:BROADCASTPacket? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:SDR:BROADCASTPacket? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:SDR:BROADCASTPacket value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:SDR:BROADCASTPacket {ENSLave|DISLave|ENTasx|RSTDya|ENTRDya|SETMwrl|SETMrdl|LSLave|ENTRTSTMode|EXTime|SETaasa|ENDXFER|SETGRPa|RSTACT|DEFGRPa|RSTGRPa|MLANe|SETBUSCON}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:SDR:BROADCASTPacket?
Info
  • SEARCH<x> specifies the search number.
  • ENSLave specifies the I3C broadcast packet type as Enable Slave.
  • DISLave specifies the I3C broadcast packet type as Disable Slave.
  • ENTasx specifies the I3C broadcast packet type as Enter Activity State.
  • RSTDya specifies the I3C broadcast packet type as Reset Dynamic Address.
  • ENTRDya specifies the I3C broadcast packet type as Enter Dynamic Address.
  • SETMwrl specifies the I3C broadcast packet type as Set Max Write Length.
  • SETMrdl specifies the I3C broadcast packet type as Set Max Read Length.
  • LSLave specifies the I3C broadcast packet type as Define List of Slaves.
  • ENTRTSTMode specifies the I3C broadcast packet type as Enter Test Mode Broadcast.
  • EXTime specifies the I3C broadcast packet type as Set Exchange Time.
  • SETaasa specifies the I3C broadcast packet type as Set Static As Dynamic Address.
  • ENDXFER specifies the I3C broadcast packet type as Data Transfer Ending Procedure Control.
  • SETGRPa specifies the I3C broadcast packet type as Set Group Address.
  • RSTACT specifies the I3C broadcast packet type as Slave Reset Action.
  • DEFGRPa specifies the I3C broadcast packet type as Define List of Group Addresses.
  • RSTGRPa specifies the I3C broadcast packet type as Reset Group Address.
  • MLANe specifies the I3C broadcast packet type as Multi-Lane Data Transfer Control.
  • SETBUSCON specifies the I3C broadcast packet type as Set Bus Context.

SearchSearchItemTriggerABusI3cSdrDirectpacket

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:SDR:DIRECTPacket command.

Description
  • This command sets or queries the SDR direct packet types for the specified I3C bus trigger search to determine where to place a mark. Requires purchase and installation of option SRI3C.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:SDR:DIRECTPacket? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:SDR:DIRECTPacket? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:SDR:DIRECTPacket value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:SDR:DIRECTPacket {ENSLave|DISLave|ENTasx|RSTDya|SETMwrl|SETMrdl|SEText|SETDya|SETNdya|GETMWrl|GETMRdl|GETPrid|GETBusch|GETDevch|GETSlave|ACCM|SETBrt|MDATASpeed|HDRCapability|GETXTime|GETCAPS|ENDXFER|SETGRPa|RSTACT|DEFGRPa|RSTGRPa|MLANe}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:SDR:DIRECTPacket?
Info
  • SEARCH<x> specifies the search number.
  • ENSLave specifies the trigger condition as Enable Slave.
  • DISLave specifies the trigger condition as Disable Slave.
  • ENTasx specifies the trigger condition as Enter Activity State.
  • RSTDya specifies the trigger condition as Reset Dynamic Address.
  • SETMwrl specifies the trigger condition as Set Max Write Length.
  • SETMrdl specifies the trigger condition as Set Max Read Length.
  • SEText specifies the trigger condition as Set Exchange Time.
  • SETDya specifies the trigger condition as Set Dynamic Address.
  • SETNdya specifies the trigger condition as Set New Dynamic Address.
  • GETMWrl specifies the trigger condition as Get Max Write Length.
  • GETMRdl specifies the trigger condition as Get Max Read Length.
  • GETPrid specifies the trigger condition as Get Provisional ID.
  • GETBusch specifies the trigger condition as Get Provisional ID.
  • GETDevch specifies the trigger condition as Get Dev Characteristics.
  • GETSlave specifies the trigger condition as Get Slave Current Status.
  • ACCM specifies the trigger condition as Get Accept Mastership.
  • SETBrt specifies the trigger condition as Set Bridge Direct Target.
  • MDATASpeed specifies the trigger condition as Get Max Data Speed.
  • HDRCapability specifies the trigger condition as Get HDR Capability.
  • GETXTime specifies the trigger condition as Get Exchange Time.
  • GETCAPS specifies the trigger condition as Get Optional Feature Capabilities.
  • ENDXFER specifies the trigger condition as Data Transfer Ending Procedure Control.
  • SETGRPa specifies the trigger condition as Set Group Address.
  • RSTACT specifies the trigger condition as Reset Group Address.
  • DEFGRPa specifies the trigger condition as Define List of Group Addresses.
  • RSTGRPa specifies the trigger condition as Reset Group Address.
  • MLANe specifies the trigger condition as Multi-Lane Data Transfer Control.

SearchSearchItemTriggerABusI3cStatebyte

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:STATEBYTe command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:STATEBYTe? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:STATEBYTe? query and raise an AssertionError if the returned value does not match value.
Info
  • SEARCH<x> specifies the search number.
Properties
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:STATEBYTe:VALue command.

value property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:STATEBYTe:VALue command.

Description
  • This command sets or queries the binary field string used for the I3C trigger if the trigger condition is STATEBYTE.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:STATEBYTe:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:STATEBYTe:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:STATEBYTe:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:STATEBYTe:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:STATEBYTe:VALue?
Info
  • SEARCH<x> specifies the search number.
  • <QString> specifies the value for which to search. The valid characters are 0, 1, or X for Binary format; and 0-9, A-F, and X for Hexadecimal format.

SearchSearchItemTriggerABusI3cStatebyteValue

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:STATEBYTe:VALue command.

Description
  • This command sets or queries the binary field string used for the I3C trigger if the trigger condition is STATEBYTE.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:STATEBYTe:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:STATEBYTe:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:STATEBYTe:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:STATEBYTe:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:STATEBYTe:VALue?
Info
  • SEARCH<x> specifies the search number.
  • <QString> specifies the value for which to search. The valid characters are 0, 1, or X for Binary format; and 0-9, A-F, and X for Hexadecimal format.

SearchSearchItemTriggerABusI3cStatic

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:STATic command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:STATic? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:STATic? query and raise an AssertionError if the returned value does not match value.
Info
  • SEARCH<x> specifies the search number.
Properties
  • .address: The SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:STATic:ADDRess command.

address property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:STATic:ADDRess command.

Description
  • This command sets or queries the binary field string used for the I3C search if the trigger condition is STATICADDRESS. Requires purchase and installation of option SRI3C.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:STATic:ADDRess? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:STATic:ADDRess? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:STATic:ADDRess value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:STATic:ADDRess <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:STATic:ADDRess?
Info
  • SEARCH<x> specifies the search number.
  • <QString> specifies the address value for which to search. The valid characters are 0, 1, or X for Binary format; and 0-9, A-F, and X for Hexadecimal format.

SearchSearchItemTriggerABusI3cStaticAddress

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:STATic:ADDRess command.

Description
  • This command sets or queries the binary field string used for the I3C search if the trigger condition is STATICADDRESS. Requires purchase and installation of option SRI3C.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:STATic:ADDRess? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:STATic:ADDRess? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:STATic:ADDRess value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:STATic:ADDRess <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:STATic:ADDRess?
Info
  • SEARCH<x> specifies the search number.
  • <QString> specifies the address value for which to search. The valid characters are 0, 1, or X for Binary format; and 0-9, A-F, and X for Hexadecimal format.

SearchSearchItemTriggerABusI3cSupportbyte

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:SUPPORTBYTe command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:SUPPORTBYTe? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:SUPPORTBYTe? query and raise an AssertionError if the returned value does not match value.
Info
  • SEARCH<x> specifies the search number.
Properties
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:SUPPORTBYTe:VALue command.

value property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:SUPPORTBYTe:VALue command.

Description
  • This command sets or queries the binary field string used for the I3C trigger if the trigger condition is SUPPORTEDBYTE. Requires purchase and installation of option SRI3C.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:SUPPORTBYTe:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:SUPPORTBYTe:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:SUPPORTBYTe:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:SUPPORTBYTe:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:SUPPORTBYTe:VALue?
Info
  • SEARCH<x> specifies the search number.
  • <QString> specifies the value for which to search. The valid characters are 0, 1, or X for Binary format; and 0-9, A-F, and X for Hexadecimal format.

SearchSearchItemTriggerABusI3cSupportbyteValue

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:SUPPORTBYTe:VALue command.

Description
  • This command sets or queries the binary field string used for the I3C trigger if the trigger condition is SUPPORTEDBYTE. Requires purchase and installation of option SRI3C.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:SUPPORTBYTe:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:SUPPORTBYTe:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:SUPPORTBYTe:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:SUPPORTBYTe:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:SUPPORTBYTe:VALue?
Info
  • SEARCH<x> specifies the search number.
  • <QString> specifies the value for which to search. The valid characters are 0, 1, or X for Binary format; and 0-9, A-F, and X for Hexadecimal format.

SearchSearchItemTriggerABusI3cTestmode

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:TESTMODe command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:TESTMODe? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:TESTMODe? query and raise an AssertionError if the returned value does not match value.
Info
  • SEARCH<x> specifies the search number.
Properties
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:TESTMODe:VALue command.

value property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:TESTMODe:VALue command.

Description
  • This command sets or queries the binary field string used for the I3C trigger if the trigger condition is TESTMODE. Requires purchase and installation of option SRI3C.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:TESTMODe:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:TESTMODe:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:TESTMODe:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:TESTMODe:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:TESTMODe:VALue?
Info
  • SEARCH<x> specifies the search number.
  • <QString> specifies the value for which to search. The valid characters are 0, 1, or X for Binary format; and 0-9, A-F, and X for Hexadecimal format.

SearchSearchItemTriggerABusI3cTestmodeValue

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:TESTMODe:VALue command.

Description
  • This command sets or queries the binary field string used for the I3C trigger if the trigger condition is TESTMODE. Requires purchase and installation of option SRI3C.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:TESTMODe:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:TESTMODe:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:TESTMODe:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:TESTMODe:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:TESTMODe:VALue?
Info
  • SEARCH<x> specifies the search number.
  • <QString> specifies the value for which to search. The valid characters are 0, 1, or X for Binary format; and 0-9, A-F, and X for Hexadecimal format.

SearchSearchItemTriggerABusLin

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN? query and raise an AssertionError if the returned value does not match value.
Properties
  • .condition: The SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:CONDition command.
  • .data: The SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa command tree.
  • .errtype: The SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:ERRTYPE command.
  • .identifier: The SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:IDentifier command tree.

condition property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:CONDition command.

Description
  • This command sets or queries the condition for a LIN bus search. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:CONDition? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:CONDition? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:CONDition value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:CONDition {DATA|IDANDDATA|ERRor|IDentifier|SLEEP|SYNCfield|WAKEup}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:CONDition?
Info
  • DATA sets the trigger condition to data.
  • IDANDDATA sets the trigger condition to ID and data.
  • ERRor sets the trigger condition to error.
  • IDentifier sets the trigger condition to identifier.
  • SLEEP sets the trigger condition to sleep.
  • SYNCfield sets the trigger condition to sync field.
  • WAKEup sets the trigger condition to wakeup.

data property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .hivalue: The SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa:HIVALue command.
  • .qualifier: The SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa:QUALifier command.
  • .size: The SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa:SIZe command.
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa:VALue command.

errtype property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:ERRTYPE command.

Description
  • This command sets or queries the error type for a LIN bus search. The search number is specified by x. The search condition must be set to ERROR.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:ERRTYPE? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:ERRTYPE? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:ERRTYPE value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:ERRTYPE {CHecksum|PARity|SYNC}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:ERRTYPE?
Info
  • CHecksum specifies the error type is checksum.
  • PARity specifies the error type is parity.
  • SYNC specifies the error type is sync.

identifier property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:IDentifier command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:IDentifier? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:IDentifier? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:IDentifier:VALue command.

SearchSearchItemTriggerABusLinCondition

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:CONDition command.

Description
  • This command sets or queries the condition for a LIN bus search. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:CONDition? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:CONDition? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:CONDition value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:CONDition {DATA|IDANDDATA|ERRor|IDentifier|SLEEP|SYNCfield|WAKEup}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:CONDition?
Info
  • DATA sets the trigger condition to data.
  • IDANDDATA sets the trigger condition to ID and data.
  • ERRor sets the trigger condition to error.
  • IDentifier sets the trigger condition to identifier.
  • SLEEP sets the trigger condition to sleep.
  • SYNCfield sets the trigger condition to sync field.
  • WAKEup sets the trigger condition to wakeup.

SearchSearchItemTriggerABusLinData

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa? query and raise an AssertionError if the returned value does not match value.
Properties
  • .hivalue: The SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa:HIVALue command.
  • .qualifier: The SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa:QUALifier command.
  • .size: The SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa:SIZe command.
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa:VALue command.

hivalue property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa:HIVALue command.

Description
  • This command sets or queries the high data value string used in a LIN bus search. The search number is specified by x. The search condition must be DATA or IDANDDATA and the data qualifier must be INRANGE or OUTRANGE.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa:HIVALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa:HIVALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa:HIVALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa:HIVALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa:HIVALue?
Info
  • <QString> is a quoted string of 1s, 0s, or Xs representing the binary data string to be used in a LIN search if the search condition is IDentifier or IDANDDATA (identifier and data).

qualifier property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa:QUALifier command.

Description
  • This command sets or queries the data qualifier used in a LIN bus search. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa:QUALifier? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa:QUALifier? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa:QUALifier value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa:QUALifier {EQual|LESSEQual|MOREEQual|UNEQual|LESSthan|MOREthan|INrange|OUTrange}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa:QUALifier?
Info
  • EQual sets the data qualifier to equal.
  • LESSEQual sets the data qualifier to less equal.
  • MOREEQual sets the data qualifier to more equal.
  • UNEQual sets the data qualifier to unequal.
  • LESSthan sets the data qualifier to less than.
  • MOREthan sets the data qualifier to more than.
  • INrange sets the data qualifier to in range.
  • OUTrange sets the data qualifier out of range.

size property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa:SIZe command.

Description
  • This command sets or queries the length of the stat string in bytes used for a LIN bus search. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa:SIZe? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa:SIZe? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa:SIZe value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa:SIZe <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa:SIZe?
Info
  • <NR1> specifies the data size.

value property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa:VALue command.

Description
  • This command sets or queries the data string used for a LIN bus search. The search number is specified by x. The search condition must be DATA or IDANDDATA.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa:VALue?
Info
  • <QString> specifies the data value.

SearchSearchItemTriggerABusLinDataHivalue

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa:HIVALue command.

Description
  • This command sets or queries the high data value string used in a LIN bus search. The search number is specified by x. The search condition must be DATA or IDANDDATA and the data qualifier must be INRANGE or OUTRANGE.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa:HIVALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa:HIVALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa:HIVALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa:HIVALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa:HIVALue?
Info
  • <QString> is a quoted string of 1s, 0s, or Xs representing the binary data string to be used in a LIN search if the search condition is IDentifier or IDANDDATA (identifier and data).

SearchSearchItemTriggerABusLinDataQualifier

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa:QUALifier command.

Description
  • This command sets or queries the data qualifier used in a LIN bus search. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa:QUALifier? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa:QUALifier? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa:QUALifier value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa:QUALifier {EQual|LESSEQual|MOREEQual|UNEQual|LESSthan|MOREthan|INrange|OUTrange}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa:QUALifier?
Info
  • EQual sets the data qualifier to equal.
  • LESSEQual sets the data qualifier to less equal.
  • MOREEQual sets the data qualifier to more equal.
  • UNEQual sets the data qualifier to unequal.
  • LESSthan sets the data qualifier to less than.
  • MOREthan sets the data qualifier to more than.
  • INrange sets the data qualifier to in range.
  • OUTrange sets the data qualifier out of range.

SearchSearchItemTriggerABusLinDataSize

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa:SIZe command.

Description
  • This command sets or queries the length of the stat string in bytes used for a LIN bus search. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa:SIZe? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa:SIZe? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa:SIZe value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa:SIZe <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa:SIZe?
Info
  • <NR1> specifies the data size.

SearchSearchItemTriggerABusLinDataValue

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa:VALue command.

Description
  • This command sets or queries the data string used for a LIN bus search. The search number is specified by x. The search condition must be DATA or IDANDDATA.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa:VALue?
Info
  • <QString> specifies the data value.

SearchSearchItemTriggerABusLinErrtype

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:ERRTYPE command.

Description
  • This command sets or queries the error type for a LIN bus search. The search number is specified by x. The search condition must be set to ERROR.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:ERRTYPE? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:ERRTYPE? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:ERRTYPE value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:ERRTYPE {CHecksum|PARity|SYNC}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:ERRTYPE?
Info
  • CHecksum specifies the error type is checksum.
  • PARity specifies the error type is parity.
  • SYNC specifies the error type is sync.

SearchSearchItemTriggerABusLinIdentifier

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:IDentifier command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:IDentifier? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:IDentifier? query and raise an AssertionError if the returned value does not match value.
Properties
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:IDentifier:VALue command.

value property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:IDentifier:VALue command.

Description
  • This command sets or queries the string used for a LIN bus identifier value. The search number is specified by x. The search condition must be IDENTIFIER or IDANDDATA.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:IDentifier:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:IDentifier:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:IDentifier:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:IDentifier:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:IDentifier:VALue?
Info
  • <QString> specifies the identifier value.

SearchSearchItemTriggerABusLinIdentifierValue

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:IDentifier:VALue command.

Description
  • This command sets or queries the string used for a LIN bus identifier value. The search number is specified by x. The search condition must be IDENTIFIER or IDANDDATA.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:IDentifier:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:IDentifier:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:IDentifier:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:IDentifier:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:IDentifier:VALue?
Info
  • <QString> specifies the identifier value.

SearchSearchItemTriggerABusManchester

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester? query and raise an AssertionError if the returned value does not match value.
Properties
  • .condition: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:CONDition command.
  • .data: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:DATa command tree.
  • .error: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:ERRor command tree.
  • .header: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:HEADER command tree.
  • .sync: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:SYNC command tree.
  • .trailer: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:TRAILER command tree.
  • .packetoffdata: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:packetOffData command tree.

condition property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:CONDition command.

Description
  • This command specifies a field or condition for an Manchester bus to search on. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:CONDition? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:CONDition? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:CONDition value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:CONDition {SYNCBITS|HEADer|DATa|packetOffData|TRAiler|ERRors}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:CONDition?
Info
  • SYNCBITS specifies Sync Bits symbols as the field within an Manchester frame to search on.
  • HEADer specifies header symbols as the field within an Manchester frame to search on.
  • DATa specifies data symbols as the field within an Manchester frame to search on.
  • packetOffData specifies the binary string used for Manchester triggering if the trigger condition is DATA.
  • TRAiler specifies trailer symbols as the field within an Manchester frame to search on.
  • ERRors specifies error symbols as the field within an Manchester frame to search on.

data property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:DATa command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:DATa? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:DATa? query and raise an AssertionError if the returned value does not match value.
Info
  • SEARCH<x> is the number of the search.
Sub-properties
  • .size: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:DATa:SIZe command.
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:DATa:VALue command.

error property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:ERRor command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:ERRor? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:ERRor? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .type: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:ERRor:TYPe command.

header property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:HEADER command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:HEADER? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:HEADER? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:HEADER:VALue command.

packetoffdata property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:packetOffData command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:packetOffData? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:packetOffData? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:packetOffData:VALue command.

sync property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:SYNC command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:SYNC? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:SYNC? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:SYNC:VALue command.

trailer property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:TRAILER command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:TRAILER? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:TRAILER? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:TRAILER:VALue command.

SearchSearchItemTriggerABusManchesterCondition

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:CONDition command.

Description
  • This command specifies a field or condition for an Manchester bus to search on. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:CONDition? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:CONDition? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:CONDition value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:CONDition {SYNCBITS|HEADer|DATa|packetOffData|TRAiler|ERRors}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:CONDition?
Info
  • SYNCBITS specifies Sync Bits symbols as the field within an Manchester frame to search on.
  • HEADer specifies header symbols as the field within an Manchester frame to search on.
  • DATa specifies data symbols as the field within an Manchester frame to search on.
  • packetOffData specifies the binary string used for Manchester triggering if the trigger condition is DATA.
  • TRAiler specifies trailer symbols as the field within an Manchester frame to search on.
  • ERRors specifies error symbols as the field within an Manchester frame to search on.

SearchSearchItemTriggerABusManchesterData

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:DATa command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:DATa? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:DATa? query and raise an AssertionError if the returned value does not match value.
Info
  • SEARCH<x> is the number of the search.
Properties
  • .size: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:DATa:SIZe command.
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:DATa:VALue command.

size property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:DATa:SIZe command.

Description
  • This command specifies the number of bits per word for the specified Manchester bus. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:DATa:SIZe? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:DATa:SIZe? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:DATa:SIZe value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:DATa:SIZe <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:DATa:SIZe?
Info
  • SEARCH<x> is the number of the search.
  • <NR1> specifies the data string in a valid format. The minimum and default values are 1. The maximum value is 5.

value property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:DATa:VALue command.

Description
  • This command specifies the binary string used for Manchester triggering if the trigger condition is data when searching on an Manchester signal. The search condition needs to be set to data. The search number is specified by .
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:DATa:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:DATa:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:DATa:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:DATa:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:DATa:VALue?
Info
  • <QString> is the data value.

SearchSearchItemTriggerABusManchesterDataSize

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:DATa:SIZe command.

Description
  • This command specifies the number of bits per word for the specified Manchester bus. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:DATa:SIZe? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:DATa:SIZe? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:DATa:SIZe value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:DATa:SIZe <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:DATa:SIZe?
Info
  • SEARCH<x> is the number of the search.
  • <NR1> specifies the data string in a valid format. The minimum and default values are 1. The maximum value is 5.

SearchSearchItemTriggerABusManchesterDataValue

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:DATa:VALue command.

Description
  • This command specifies the binary string used for Manchester triggering if the trigger condition is data when searching on an Manchester signal. The search condition needs to be set to data. The search number is specified by .
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:DATa:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:DATa:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:DATa:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:DATa:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:DATa:VALue?
Info
  • <QString> is the data value.

SearchSearchItemTriggerABusManchesterError

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:ERRor command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:ERRor? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:ERRor? query and raise an AssertionError if the returned value does not match value.
Properties
  • .type: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:ERRor:TYPe command.

type property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:ERRor:TYPe command.

Description
  • This command sets or queries the error to be used when searching ona Manchester signal. The search condition must be set to error. Parity error identifies odd and even parity. The search number is specified by .
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:ERRor:TYPe? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:ERRor:TYPe? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:ERRor:TYPe value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:ERRor:TYPe {MANChester|PARity}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:ERRor:TYPe?
Info
  • MANChester sets the error type to Manchester.
  • PARity sets the error type to parity.

SearchSearchItemTriggerABusManchesterErrorType

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:ERRor:TYPe command.

Description
  • This command sets or queries the error to be used when searching ona Manchester signal. The search condition must be set to error. Parity error identifies odd and even parity. The search number is specified by .
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:ERRor:TYPe? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:ERRor:TYPe? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:ERRor:TYPe value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:ERRor:TYPe {MANChester|PARity}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:ERRor:TYPe?
Info
  • MANChester sets the error type to Manchester.
  • PARity sets the error type to parity.

SearchSearchItemTriggerABusManchesterHeader

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:HEADER command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:HEADER? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:HEADER? query and raise an AssertionError if the returned value does not match value.
Properties
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:HEADER:VALue command.

value property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:HEADER:VALue command.

Description
  • This command specifies the binary string used for Manchester triggering if the trigger condition is header when searching on an Manchester signal. The search condition needs to be set to header. The search number is specified by .
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:HEADER:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:HEADER:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:HEADER:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:HEADER:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:HEADER:VALue?
Info
  • <QString> is the header value.

SearchSearchItemTriggerABusManchesterHeaderValue

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:HEADER:VALue command.

Description
  • This command specifies the binary string used for Manchester triggering if the trigger condition is header when searching on an Manchester signal. The search condition needs to be set to header. The search number is specified by .
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:HEADER:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:HEADER:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:HEADER:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:HEADER:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:HEADER:VALue?
Info
  • <QString> is the header value.

SearchSearchItemTriggerABusManchesterPacketoffdata

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:packetOffData command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:packetOffData? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:packetOffData? query and raise an AssertionError if the returned value does not match value.
Properties
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:packetOffData:VALue command.

value property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:packetOffData:VALue command.

Description
  • This command specifies the binary string used for Manchester triggering if the trigger condition is DATA. The search number is specified by .
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:packetOffData:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:packetOffData:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:packetOffData:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:packetOffData:VALue <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:packetOffData:VALue?
Info
  • <NR1> specifies the data string in a valid format.

SearchSearchItemTriggerABusManchesterPacketoffdataValue

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:packetOffData:VALue command.

Description
  • This command specifies the binary string used for Manchester triggering if the trigger condition is DATA. The search number is specified by .
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:packetOffData:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:packetOffData:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:packetOffData:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:packetOffData:VALue <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:packetOffData:VALue?
Info
  • <NR1> specifies the data string in a valid format.

SearchSearchItemTriggerABusManchesterSync

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:SYNC command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:SYNC? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:SYNC? query and raise an AssertionError if the returned value does not match value.
Properties
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:SYNC:VALue command.

value property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:SYNC:VALue command.

Description
  • This command specifies the binary string used for Manchester triggering if the trigger condition is Sync when searching on an Manchester signal. The search condition needs to be set to Sync. The search number is specified by .
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:SYNC:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:SYNC:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:SYNC:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:SYNC:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:SYNC:VALue?
Info
  • <QString> specifies the data string in a valid format.

SearchSearchItemTriggerABusManchesterSyncValue

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:SYNC:VALue command.

Description
  • This command specifies the binary string used for Manchester triggering if the trigger condition is Sync when searching on an Manchester signal. The search condition needs to be set to Sync. The search number is specified by .
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:SYNC:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:SYNC:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:SYNC:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:SYNC:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:SYNC:VALue?
Info
  • <QString> specifies the data string in a valid format.

SearchSearchItemTriggerABusManchesterTrailer

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:TRAILER command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:TRAILER? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:TRAILER? query and raise an AssertionError if the returned value does not match value.
Properties
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:TRAILER:VALue command.

value property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:TRAILER:VALue command.

Description
  • This command specifies the binary string used for Manchester triggering if the trigger condition is Trailer when searching on an Manchester signal. The search condition needs to be set to Trailer. The search number is specified by .
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:TRAILER:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:TRAILER:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:TRAILER:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:TRAILER:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:TRAILER:VALue?
Info
  • <QString> specifies the data string in a valid format.

SearchSearchItemTriggerABusManchesterTrailerValue

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:TRAILER:VALue command.

Description
  • This command specifies the binary string used for Manchester triggering if the trigger condition is Trailer when searching on an Manchester signal. The search condition needs to be set to Trailer. The search number is specified by .
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:TRAILER:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:TRAILER:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:TRAILER:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:TRAILER:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:TRAILER:VALue?
Info
  • <QString> specifies the data string in a valid format.

SearchSearchItemTriggerABusMdio

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO? query and raise an AssertionError if the returned value does not match value.
Properties
  • .address: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:ADDress command tree.
  • .condition: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:CONDition command.
  • .data: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:DATa command tree.
  • .devicetype: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:DEVicetype command tree.
  • .errtype: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:ERRType command.
  • .opcode: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:OPCode command tree.
  • .physicaladdress: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:PHYSicaladdress command tree.
  • .registeraddress: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:REGisteraddress command tree.

address property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:ADDress command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:ADDress? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:ADDress? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:ADDress:VALue command.

condition property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:CONDition command.

Description
  • This command sets or queries the trigger condition for MDIO bus. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:CONDition? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:CONDition? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:CONDition value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:CONDition {STARTPACKet|PHYSICALADDRess|REGISTERADDRess|DEVICETYPe|DATA|ADDRess|ERRor}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:CONDition?
Info
  • STARTPACKet specifies STARTPACKet as the field within a MDIO frame to search on. This is the default trigger on condition.
  • PHYSICALADDRess specifies PHYSICALADDRess as the field within a MDIO frame to search on.
  • REGISTERADDRess specifies REGISTERADDRess as the field within a MDIO frame to search on.
  • DEVICETYPe specifies DEVICETYPe as the field within a MDIO frame to search on.
  • DATA specifies DATA as the field within a MDIO frame to search on.
  • ADDRess specifies ADDRess as the field within a MDIO frame to search on.
  • ERRor specifies ERRor as the field within a MDIO frame to search on.

data property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:DATa command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:DATa? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:DATa? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:DATa:VALue command.

devicetype property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:DEVicetype command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:DEVicetype? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:DEVicetype? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:DEVicetype:VALue command.

errtype property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:ERRType command.

Description
  • This command sets or queries the error type to be used when triggering on MDIO data. This applies when the MDIO bus trigger condition is set to ERRor. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:ERRType? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:ERRType? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:ERRType value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:ERRType {OPCODEERRor|DEVERRor|ANY}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:ERRType?
Info
  • OPCODEERRor specifies OPCODEERRor as the field within a MDIO frame to search on. This is the default trigger on condition.
  • DEVERRor specifies DEVERRor as the field within a MDIO frame to search on.
  • ANY specifies ANY as the field within a MDIO frame to search on.

opcode property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:OPCode command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:OPCode? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:OPCode? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:OPCode:VALue command.

physicaladdress property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:PHYSicaladdress command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:PHYSicaladdress? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:PHYSicaladdress? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:PHYSicaladdress:VALue command.

registeraddress property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:REGisteraddress command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:REGisteraddress? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:REGisteraddress? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:REGisteraddress:VALue command.

SearchSearchItemTriggerABusMdioAddress

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:ADDress command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:ADDress? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:ADDress? query and raise an AssertionError if the returned value does not match value.
Properties
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:ADDress:VALue command.

value property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:ADDress:VALue command.

Description
  • This command specifies the binary address string used for MDIO triggering if the trigger condition is address. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:ADDress:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:ADDress:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:ADDress:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:ADDress:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:ADDress:VALue?
Info
  • <QString> is the address value. Default address value is XXXXXXXXXXXXXXXX.

SearchSearchItemTriggerABusMdioAddressValue

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:ADDress:VALue command.

Description
  • This command specifies the binary address string used for MDIO triggering if the trigger condition is address. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:ADDress:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:ADDress:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:ADDress:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:ADDress:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:ADDress:VALue?
Info
  • <QString> is the address value. Default address value is XXXXXXXXXXXXXXXX.

SearchSearchItemTriggerABusMdioCondition

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:CONDition command.

Description
  • This command sets or queries the trigger condition for MDIO bus. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:CONDition? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:CONDition? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:CONDition value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:CONDition {STARTPACKet|PHYSICALADDRess|REGISTERADDRess|DEVICETYPe|DATA|ADDRess|ERRor}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:CONDition?
Info
  • STARTPACKet specifies STARTPACKet as the field within a MDIO frame to search on. This is the default trigger on condition.
  • PHYSICALADDRess specifies PHYSICALADDRess as the field within a MDIO frame to search on.
  • REGISTERADDRess specifies REGISTERADDRess as the field within a MDIO frame to search on.
  • DEVICETYPe specifies DEVICETYPe as the field within a MDIO frame to search on.
  • DATA specifies DATA as the field within a MDIO frame to search on.
  • ADDRess specifies ADDRess as the field within a MDIO frame to search on.
  • ERRor specifies ERRor as the field within a MDIO frame to search on.

SearchSearchItemTriggerABusMdioData

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:DATa command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:DATa? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:DATa? query and raise an AssertionError if the returned value does not match value.
Properties
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:DATa:VALue command.

value property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:DATa:VALue command.

Description
  • This command specifies the binary data string used for MDIO triggering if the trigger condition is DATA. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:DATa:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:DATa:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:DATa:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:DATa:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:DATa:VALue?
Info
  • <QString> is the data value. Default value is XXXXXXXXXXXXXXXX.

SearchSearchItemTriggerABusMdioDataValue

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:DATa:VALue command.

Description
  • This command specifies the binary data string used for MDIO triggering if the trigger condition is DATA. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:DATa:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:DATa:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:DATa:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:DATa:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:DATa:VALue?
Info
  • <QString> is the data value. Default value is XXXXXXXXXXXXXXXX.

SearchSearchItemTriggerABusMdioDevicetype

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:DEVicetype command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:DEVicetype? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:DEVicetype? query and raise an AssertionError if the returned value does not match value.
Properties
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:DEVicetype:VALue command.

value property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:DEVicetype:VALue command.

Description
  • This command specifies the binary device type string used for MDIO triggering if the trigger condition is Device type. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:DEVicetype:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:DEVicetype:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:DEVicetype:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:DEVicetype:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:DEVicetype:VALue?
Info
  • <QString> is the device type. Default value is XXXXX.

SearchSearchItemTriggerABusMdioDevicetypeValue

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:DEVicetype:VALue command.

Description
  • This command specifies the binary device type string used for MDIO triggering if the trigger condition is Device type. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:DEVicetype:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:DEVicetype:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:DEVicetype:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:DEVicetype:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:DEVicetype:VALue?
Info
  • <QString> is the device type. Default value is XXXXX.

SearchSearchItemTriggerABusMdioErrtype

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:ERRType command.

Description
  • This command sets or queries the error type to be used when triggering on MDIO data. This applies when the MDIO bus trigger condition is set to ERRor. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:ERRType? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:ERRType? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:ERRType value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:ERRType {OPCODEERRor|DEVERRor|ANY}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:ERRType?
Info
  • OPCODEERRor specifies OPCODEERRor as the field within a MDIO frame to search on. This is the default trigger on condition.
  • DEVERRor specifies DEVERRor as the field within a MDIO frame to search on.
  • ANY specifies ANY as the field within a MDIO frame to search on.

SearchSearchItemTriggerABusMdioOpcode

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:OPCode command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:OPCode? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:OPCode? query and raise an AssertionError if the returned value does not match value.
Properties
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:OPCode:VALue command.

value property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:OPCode:VALue command.

Description
  • This command specifies the binary op-code string used for MDIO triggering if the trigger condition is op-code. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:OPCode:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:OPCode:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:OPCode:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:OPCode:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:OPCode:VALue?
Info
  • <QString> is the op-code value. Default op-code value is XX.

SearchSearchItemTriggerABusMdioOpcodeValue

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:OPCode:VALue command.

Description
  • This command specifies the binary op-code string used for MDIO triggering if the trigger condition is op-code. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:OPCode:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:OPCode:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:OPCode:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:OPCode:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:OPCode:VALue?
Info
  • <QString> is the op-code value. Default op-code value is XX.

SearchSearchItemTriggerABusMdioPhysicaladdress

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:PHYSicaladdress command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:PHYSicaladdress? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:PHYSicaladdress? query and raise an AssertionError if the returned value does not match value.
Properties
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:PHYSicaladdress:VALue command.

value property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:PHYSicaladdress:VALue command.

Description
  • This command specifies the binary physical address string used for MDIO triggering if the trigger condition is physical address. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:PHYSicaladdress:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:PHYSicaladdress:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:PHYSicaladdress:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:PHYSicaladdress:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:PHYSicaladdress:VALue?
Info
  • <QString> is the physical address value. Default physical address value is XXXXX.

SearchSearchItemTriggerABusMdioPhysicaladdressValue

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:PHYSicaladdress:VALue command.

Description
  • This command specifies the binary physical address string used for MDIO triggering if the trigger condition is physical address. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:PHYSicaladdress:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:PHYSicaladdress:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:PHYSicaladdress:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:PHYSicaladdress:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:PHYSicaladdress:VALue?
Info
  • <QString> is the physical address value. Default physical address value is XXXXX.

SearchSearchItemTriggerABusMdioRegisteraddress

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:REGisteraddress command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:REGisteraddress? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:REGisteraddress? query and raise an AssertionError if the returned value does not match value.
Properties
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:REGisteraddress:VALue command.

value property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:REGisteraddress:VALue command.

Description
  • This command specifies the binary register address string used for MDIO triggering if the trigger condition is register address. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:REGisteraddress:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:REGisteraddress:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:REGisteraddress:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:REGisteraddress:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:REGisteraddress:VALue?
Info
  • <QString> is the register address value. Default register address value is XXXXX.

SearchSearchItemTriggerABusMdioRegisteraddressValue

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:REGisteraddress:VALue command.

Description
  • This command specifies the binary register address string used for MDIO triggering if the trigger condition is register address. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:REGisteraddress:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:REGisteraddress:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:REGisteraddress:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:REGisteraddress:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:REGisteraddress:VALue?
Info
  • <QString> is the register address value. Default register address value is XXXXX.

SearchSearchItemTriggerABusMil1553b

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B? query and raise an AssertionError if the returned value does not match value.
Properties
  • .command: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND command tree.
  • .condition: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:CONDition command.
  • .data: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:DATa command tree.
  • .errtype: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:ERRTYPe command.
  • .status: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus command tree.

command property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .address: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:ADDRess command tree.
  • .count: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:COUNt command.
  • .parity: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:PARity command.
  • .subaddress: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:SUBADdress command.
  • .trbit: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:TRBit command.

condition property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:CONDition command.

Description
  • This command sets or queries the field or condition for a MIL-STD-1553 bus to search on. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:CONDition? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:CONDition? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:CONDition value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:CONDition {SYNC|COMMAND|STATus|DATA|ERRor}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:CONDition?
Info
  • SYNC specifies a search for the sync pulse of any word.
  • COMMAND specifies a search for a matching command word.
  • STATus specifies a search for a matching status word.
  • DATA specifies a search for a matching data word.
  • ERRor specifies a search for a specified error condition.

data property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:DATa command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:DATa? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:DATa? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .parity: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:DATa:PARity command.
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:DATa:VALue command.

errtype property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:ERRTYPe command.

Description
  • This command sets or queries the type of error condition for a MIL-STD-1553 bus to search on. The search number is specified by x. The search condition must be set to ERRor.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:ERRTYPe? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:ERRTYPe? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:ERRTYPe value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:ERRTYPe {PARity|SYNC|DATA}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:ERRTYPe?
Info
  • PARity specifies searching for an incorrectly calculated parity bit in any word.
  • SYNC specifies searching for any sync pulse that does not transition in the middle of the pulse as required.
  • DATA specifies searching for any non-contiguous data words.

status property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .address: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:ADDRess command tree.
  • .bit: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:BIT command tree.
  • .parity: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:PARity command.

SearchSearchItemTriggerABusMil1553bCommand

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND? query and raise an AssertionError if the returned value does not match value.
Properties
  • .address: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:ADDRess command tree.
  • .count: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:COUNt command.
  • .parity: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:PARity command.
  • .subaddress: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:SUBADdress command.
  • .trbit: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:TRBit command.

address property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:ADDRess command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:ADDRess? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:ADDRess? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .hivalue: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:ADDRess:HIVALue command.
  • .qualifier: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:ADDRess:QUALifier command.
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:ADDRess:VALue command.

count property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:COUNt command.

Description
  • This command sets or queries the value of the command word ‘word count’ field for a MIL-STD-1553 bus to search on. The search number is specified by x. The search condition must be set to COMMAND.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:COUNt? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:COUNt? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:COUNt value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:COUNt <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:COUNt?
Info
  • <QString> is the word count value.

parity property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:PARity command.

Description
  • This command sets or queries the value of the command word parity bit for a MIL-STD-1553 bus to search on. The search number is specified by x. The search condition must be set to COMMAND.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:PARity? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:PARity? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:PARity value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:PARity {ONE|ZERo|NOCARE}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:PARity?
Info
  • ONE filters command words to only match those where the parity bit has a value of 1.
  • ZERo filters command words to only match those where the parity bit has a value of 0.
  • NOCARE disables filtering of command words on the parity bit.

subaddress property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:SUBADdress command.

Description
  • This command sets or queries the value of the command word subaddress field for a MIL-STD-1553 bus to search on. The search number is specified by x. The search condition must be set to COMMAND.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:SUBADdress? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:SUBADdress? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:SUBADdress value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:SUBADdress <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:SUBADdress?
Info
  • <QString> is the word count value.

trbit property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:TRBit command.

Description
  • This command sets or queries the value of the command word Transmit / Receive bit for a MIL-STD-1553 bus to search on. The search number is specified by x. The search condition must be set to COMMAND.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:TRBit? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:TRBit? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:TRBit value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:TRBit {RX|TX|X}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:TRBit?
Info
  • RX filters command words to only match those that are receive packets.
  • TX filters command words to only match those that are transmit packets.
  • X disables filtering of command words on the R/T bit.

SearchSearchItemTriggerABusMil1553bCommandAddress

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:ADDRess command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:ADDRess? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:ADDRess? query and raise an AssertionError if the returned value does not match value.
Properties
  • .hivalue: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:ADDRess:HIVALue command.
  • .qualifier: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:ADDRess:QUALifier command.
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:ADDRess:VALue command.

hivalue property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:ADDRess:HIVALue command.

Description
  • This command sets or queries the high value when searching on command word addresses for a MIL-STD-1553 bus. The search number is specified by x. The search condition must be set to COMMAND, and the address qualifier must be INrange or OUTrange.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:ADDRess:HIVALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:ADDRess:HIVALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:ADDRess:HIVALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:ADDRess:HIVALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:ADDRess:HIVALue?
Info
  • <QString> is the address value.

qualifier property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:ADDRess:QUALifier command.

Description
  • This command sets or queries the qualifier to be used when searching on command word addresses for a MIL-STD-1553 bus. The search number is specified by x. The search condition must be set to COMMAND.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:ADDRess:QUALifier? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:ADDRess:QUALifier? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:ADDRess:QUALifier value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:ADDRess:QUALifier {EQual|UNEQual|LESSthan|MOREthan|LESSEQual|MOREEQual|INrange|OUTrange}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:ADDRess:QUALifier?
Info
  • EQual sets the data qualifier to equal.
  • LESSEQual sets the data qualifier to less equal.
  • MOREEQual sets the data qualifier to more equal.
  • UNEQual sets the data qualifier to unequal.
  • LESSthan sets the data qualifier to less than.
  • MOREthan sets the data qualifier to more than.
  • INrange sets the data qualifier to in range.
  • OUTrange sets the data qualifier out of range.

value property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:ADDRess:VALue command.

Description
  • This command sets or queries the low value when searching on command word addresses for a MIL-STD-1553 bus. The search number is specified by x. The search condition must be set to COMMAND.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:ADDRess:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:ADDRess:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:ADDRess:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:ADDRess:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:ADDRess:VALue?
Info
  • <QString> is the address value.

SearchSearchItemTriggerABusMil1553bCommandAddressHivalue

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:ADDRess:HIVALue command.

Description
  • This command sets or queries the high value when searching on command word addresses for a MIL-STD-1553 bus. The search number is specified by x. The search condition must be set to COMMAND, and the address qualifier must be INrange or OUTrange.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:ADDRess:HIVALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:ADDRess:HIVALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:ADDRess:HIVALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:ADDRess:HIVALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:ADDRess:HIVALue?
Info
  • <QString> is the address value.

SearchSearchItemTriggerABusMil1553bCommandAddressQualifier

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:ADDRess:QUALifier command.

Description
  • This command sets or queries the qualifier to be used when searching on command word addresses for a MIL-STD-1553 bus. The search number is specified by x. The search condition must be set to COMMAND.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:ADDRess:QUALifier? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:ADDRess:QUALifier? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:ADDRess:QUALifier value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:ADDRess:QUALifier {EQual|UNEQual|LESSthan|MOREthan|LESSEQual|MOREEQual|INrange|OUTrange}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:ADDRess:QUALifier?
Info
  • EQual sets the data qualifier to equal.
  • LESSEQual sets the data qualifier to less equal.
  • MOREEQual sets the data qualifier to more equal.
  • UNEQual sets the data qualifier to unequal.
  • LESSthan sets the data qualifier to less than.
  • MOREthan sets the data qualifier to more than.
  • INrange sets the data qualifier to in range.
  • OUTrange sets the data qualifier out of range.

SearchSearchItemTriggerABusMil1553bCommandAddressValue

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:ADDRess:VALue command.

Description
  • This command sets or queries the low value when searching on command word addresses for a MIL-STD-1553 bus. The search number is specified by x. The search condition must be set to COMMAND.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:ADDRess:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:ADDRess:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:ADDRess:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:ADDRess:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:ADDRess:VALue?
Info
  • <QString> is the address value.

SearchSearchItemTriggerABusMil1553bCommandCount

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:COUNt command.

Description
  • This command sets or queries the value of the command word ‘word count’ field for a MIL-STD-1553 bus to search on. The search number is specified by x. The search condition must be set to COMMAND.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:COUNt? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:COUNt? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:COUNt value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:COUNt <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:COUNt?
Info
  • <QString> is the word count value.

SearchSearchItemTriggerABusMil1553bCommandParity

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:PARity command.

Description
  • This command sets or queries the value of the command word parity bit for a MIL-STD-1553 bus to search on. The search number is specified by x. The search condition must be set to COMMAND.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:PARity? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:PARity? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:PARity value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:PARity {ONE|ZERo|NOCARE}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:PARity?
Info
  • ONE filters command words to only match those where the parity bit has a value of 1.
  • ZERo filters command words to only match those where the parity bit has a value of 0.
  • NOCARE disables filtering of command words on the parity bit.

SearchSearchItemTriggerABusMil1553bCommandSubaddress

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:SUBADdress command.

Description
  • This command sets or queries the value of the command word subaddress field for a MIL-STD-1553 bus to search on. The search number is specified by x. The search condition must be set to COMMAND.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:SUBADdress? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:SUBADdress? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:SUBADdress value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:SUBADdress <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:SUBADdress?
Info
  • <QString> is the word count value.

SearchSearchItemTriggerABusMil1553bCommandTrbit

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:TRBit command.

Description
  • This command sets or queries the value of the command word Transmit / Receive bit for a MIL-STD-1553 bus to search on. The search number is specified by x. The search condition must be set to COMMAND.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:TRBit? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:TRBit? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:TRBit value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:TRBit {RX|TX|X}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:TRBit?
Info
  • RX filters command words to only match those that are receive packets.
  • TX filters command words to only match those that are transmit packets.
  • X disables filtering of command words on the R/T bit.

SearchSearchItemTriggerABusMil1553bCondition

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:CONDition command.

Description
  • This command sets or queries the field or condition for a MIL-STD-1553 bus to search on. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:CONDition? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:CONDition? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:CONDition value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:CONDition {SYNC|COMMAND|STATus|DATA|ERRor}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:CONDition?
Info
  • SYNC specifies a search for the sync pulse of any word.
  • COMMAND specifies a search for a matching command word.
  • STATus specifies a search for a matching status word.
  • DATA specifies a search for a matching data word.
  • ERRor specifies a search for a specified error condition.

SearchSearchItemTriggerABusMil1553bData

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:DATa command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:DATa? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:DATa? query and raise an AssertionError if the returned value does not match value.
Properties
  • .parity: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:DATa:PARity command.
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:DATa:VALue command.

parity property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:DATa:PARity command.

Description
  • This command sets or queries the value of the command word parity bit for a MIL-STD-1553 bus to search on. The search number is specified by x. The search condition must be set to DATA.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:DATa:PARity? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:DATa:PARity? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:DATa:PARity value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:DATa:PARity {ONE|ZERo|NOCARE}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:DATa:PARity?
Info
  • ONE filters data words to only match those where the parity bit has a value of 1.
  • ZERo filters data words to only match those where the parity bit has a value of 0.
  • NOCARE disables filtering of data words on the parity bit.

value property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:DATa:VALue command.

Description
  • This command sets or queries the value when searching on data words for a MIL-STD-1553 bus. The search number is specified by x. The search condition must be set to DATA.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:DATa:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:DATa:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:DATa:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:DATa:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:DATa:VALue?
Info
  • <QString> is the data value.

SearchSearchItemTriggerABusMil1553bDataParity

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:DATa:PARity command.

Description
  • This command sets or queries the value of the command word parity bit for a MIL-STD-1553 bus to search on. The search number is specified by x. The search condition must be set to DATA.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:DATa:PARity? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:DATa:PARity? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:DATa:PARity value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:DATa:PARity {ONE|ZERo|NOCARE}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:DATa:PARity?
Info
  • ONE filters data words to only match those where the parity bit has a value of 1.
  • ZERo filters data words to only match those where the parity bit has a value of 0.
  • NOCARE disables filtering of data words on the parity bit.

SearchSearchItemTriggerABusMil1553bDataValue

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:DATa:VALue command.

Description
  • This command sets or queries the value when searching on data words for a MIL-STD-1553 bus. The search number is specified by x. The search condition must be set to DATA.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:DATa:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:DATa:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:DATa:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:DATa:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:DATa:VALue?
Info
  • <QString> is the data value.

SearchSearchItemTriggerABusMil1553bErrtype

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:ERRTYPe command.

Description
  • This command sets or queries the type of error condition for a MIL-STD-1553 bus to search on. The search number is specified by x. The search condition must be set to ERRor.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:ERRTYPe? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:ERRTYPe? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:ERRTYPe value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:ERRTYPe {PARity|SYNC|DATA}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:ERRTYPe?
Info
  • PARity specifies searching for an incorrectly calculated parity bit in any word.
  • SYNC specifies searching for any sync pulse that does not transition in the middle of the pulse as required.
  • DATA specifies searching for any non-contiguous data words.

SearchSearchItemTriggerABusMil1553bStatus

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus? query and raise an AssertionError if the returned value does not match value.
Properties
  • .address: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:ADDRess command tree.
  • .bit: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:BIT command tree.
  • .parity: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:PARity command.

address property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:ADDRess command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:ADDRess? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:ADDRess? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .hivalue: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:ADDRess:HIVALue command.
  • .qualifier: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:ADDRess:QUALifier command.
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:ADDRess:VALue command.

bit property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:BIT command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:BIT? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:BIT? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .bcr: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:BIT:BCR command.
  • .busy: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:BIT:BUSY command.
  • .dbca: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:BIT:DBCA command.
  • .instr: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:BIT:INSTR command.
  • .me: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:BIT:ME command.
  • .srq: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:BIT:SRQ command.
  • .subsf: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:BIT:SUBSF command.
  • .tf: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:BIT:TF command.

parity property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:PARity command.

Description
  • This command sets or queries the value of the status word parity bit for a MIL-STD-1553 bus to search on. The search number is specified by x. The search condition must be set to STATus.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:PARity? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:PARity? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:PARity value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:PARity {ONE|ZERo|NOCARE}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:PARity?
Info
  • ONE filters status words to only match those where the parity bit has a value of 1.
  • ZERo filters status words to only match those where the parity bit has a value of 0.
  • NOCARE disables filtering of status words on the parity bit.

SearchSearchItemTriggerABusMil1553bStatusAddress

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:ADDRess command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:ADDRess? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:ADDRess? query and raise an AssertionError if the returned value does not match value.
Properties
  • .hivalue: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:ADDRess:HIVALue command.
  • .qualifier: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:ADDRess:QUALifier command.
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:ADDRess:VALue command.

hivalue property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:ADDRess:HIVALue command.

Description
  • This command sets or queries the high value when searching on status word addresses for a MIL-STD-1553 bus. The search number is specified by x. The search condition must be set to STATus and the address qualifier must be INrange or OUTrange.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:ADDRess:HIVALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:ADDRess:HIVALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:ADDRess:HIVALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:ADDRess:HIVALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:ADDRess:HIVALue?
Info
  • <QString> is the address value.

qualifier property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:ADDRess:QUALifier command.

Description
  • This command sets or queries the qualifier used when searching on status word addresses for a MIL-STD-1553 bus. The search number is specified by x. The search condition must be set to STATus.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:ADDRess:QUALifier? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:ADDRess:QUALifier? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:ADDRess:QUALifier value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:ADDRess:QUALifier {EQual|UNEQual|LESSthan|MOREthan|LESSEQual|MOREEQual|INrange|OUTrange}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:ADDRess:QUALifier?
Info
  • EQual sets the data qualifier to equal.
  • LESSEQual sets the data qualifier to less equal.
  • MOREEQual sets the data qualifier to more equal.
  • UNEQual sets the data qualifier to unequal.
  • LESSthan sets the data qualifier to less than.
  • MOREthan sets the data qualifier to more than.
  • INrange sets the data qualifier to in range.
  • OUTrange sets the data qualifier out of range.

value property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:ADDRess:VALue command.

Description
  • This command sets or queries the low value when searching on status word addresses for a MIL-STD-1553 bus. The search number is specified by x. The search condition must be set to STATus.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:ADDRess:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:ADDRess:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:ADDRess:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:ADDRess:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:ADDRess:VALue?
Info
  • <QString> is the address value.

SearchSearchItemTriggerABusMil1553bStatusAddressHivalue

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:ADDRess:HIVALue command.

Description
  • This command sets or queries the high value when searching on status word addresses for a MIL-STD-1553 bus. The search number is specified by x. The search condition must be set to STATus and the address qualifier must be INrange or OUTrange.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:ADDRess:HIVALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:ADDRess:HIVALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:ADDRess:HIVALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:ADDRess:HIVALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:ADDRess:HIVALue?
Info
  • <QString> is the address value.

SearchSearchItemTriggerABusMil1553bStatusAddressQualifier

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:ADDRess:QUALifier command.

Description
  • This command sets or queries the qualifier used when searching on status word addresses for a MIL-STD-1553 bus. The search number is specified by x. The search condition must be set to STATus.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:ADDRess:QUALifier? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:ADDRess:QUALifier? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:ADDRess:QUALifier value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:ADDRess:QUALifier {EQual|UNEQual|LESSthan|MOREthan|LESSEQual|MOREEQual|INrange|OUTrange}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:ADDRess:QUALifier?
Info
  • EQual sets the data qualifier to equal.
  • LESSEQual sets the data qualifier to less equal.
  • MOREEQual sets the data qualifier to more equal.
  • UNEQual sets the data qualifier to unequal.
  • LESSthan sets the data qualifier to less than.
  • MOREthan sets the data qualifier to more than.
  • INrange sets the data qualifier to in range.
  • OUTrange sets the data qualifier out of range.

SearchSearchItemTriggerABusMil1553bStatusAddressValue

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:ADDRess:VALue command.

Description
  • This command sets or queries the low value when searching on status word addresses for a MIL-STD-1553 bus. The search number is specified by x. The search condition must be set to STATus.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:ADDRess:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:ADDRess:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:ADDRess:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:ADDRess:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:ADDRess:VALue?
Info
  • <QString> is the address value.

SearchSearchItemTriggerABusMil1553bStatusBit

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:BIT command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:BIT? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:BIT? query and raise an AssertionError if the returned value does not match value.
Properties
  • .bcr: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:BIT:BCR command.
  • .busy: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:BIT:BUSY command.
  • .dbca: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:BIT:DBCA command.
  • .instr: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:BIT:INSTR command.
  • .me: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:BIT:ME command.
  • .srq: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:BIT:SRQ command.
  • .subsf: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:BIT:SUBSF command.
  • .tf: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:BIT:TF command.

bcr property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:BIT:BCR command.

Description
  • This command sets or queries the value of the broadcast command received bit (BCR bit, bit 15) in a status word for a MIL-STD-1553 bus to search on. The search number is specified by x. The search condition must be set to STATus.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:BIT:BCR? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:BIT:BCR? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:BIT:BCR value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:BIT:BCR {ONE|ZERo|NOCARE}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:BIT:BCR?
Info
  • ONE filters status words to only match those where the BCR bit has a value of 1.
  • ZERo filters status words to only match those where the BCR bit has a value of 0.
  • NOCARE disables filtering of status words on the BCR bit.

busy property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:BIT:BUSY command.

Description
  • This command sets or queries the value of the busy bit (BUSY bit, bit 16) in a status word for a MIL-STD-1553 bus to search on. The search number is specified by x. The search condition must be set to STATus.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:BIT:BUSY? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:BIT:BUSY? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:BIT:BUSY value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:BIT:BUSY {ONE|ZERo|NOCARE}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:BIT:BUSY?
Info
  • ONE filters status words to only match those where the BUSY bit has a value of 1.
  • ZERo filters status words to only match those where the BUSY bit has a value of 0.
  • NOCARE disables filtering of status words on the BUSY bit.

dbca property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:BIT:DBCA command.

Description
  • This command sets or queries the value of the dynamic bus control acceptance bit (DBCA bit, bit 18) in a status word for a MIL-STD-1553 bus to search on. The search number is specified by x. The search condition must be set to STATus.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:BIT:DBCA? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:BIT:DBCA? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:BIT:DBCA value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:BIT:DBCA {ONE|ZERo|NOCARE}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:BIT:DBCA?
Info
  • ONE filters status words to only match those where the DBCA bit has a value of 1.
  • ZERo filters status words to only match those where the DBCA bit has a value of 0.
  • NOCARE disables filtering of status words on the DBCA bit.

instr property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:BIT:INSTR command.

Description
  • This command sets or queries the value of the instrumentation bit (INSTR bit, bit 10) in a status word for a MIL-STD-1553 bus to search on. The search number is specified by x. The search condition must be set to STATus.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:BIT:INSTR? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:BIT:INSTR? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:BIT:INSTR value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:BIT:INSTR {ONE|ZERo|NOCARE}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:BIT:INSTR?
Info
  • ONE filters status words to only match those where the INSTR bit has a value of 1.
  • ZERo filters status words to only match those where the INSTR bit has a value of 0.
  • NOCARE disables filtering of status words on the INSTR bit.

me property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:BIT:ME command.

Description
  • This command sets or queries the value of the message error bit (ME bit, bit 9) in a status word for a MIL-STD-1553 bus to search on. The search number is specified by x. The search condition must be set to STATus.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:BIT:ME? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:BIT:ME? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:BIT:ME value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:BIT:ME {ONE|ZERo|NOCARE}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:BIT:ME?
Info
  • ONE filters status words to only match those where the ME bit has a value of 1.
  • ZERo filters status words to only match those where the ME bit has a value of 0.
  • NOCARE disables filtering of status words on the ME bit.

srq property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:BIT:SRQ command.

Description
  • This command sets or queries the value of the status word service request bit (SRQ bit, bit 11) in a status word for a MIL-STD-1553 bus to search on. The search number is specified by x. The search condition must be set to STATus.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:BIT:SRQ? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:BIT:SRQ? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:BIT:SRQ value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:BIT:SRQ {ONE|ZERo|NOCARE}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:BIT:SRQ?
Info
  • ONE filters status words to only match those where the SRQ bit has a value of 1.
  • ZERo filters status words to only match those where the SRQ bit has a value of 0.
  • NOCARE disables filtering of status words on the SRQ bit.

subsf property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:BIT:SUBSF command.

Description
  • This command sets or queries the value of the subsystem flag bit (SUBSF bit, bit 17) in a status word for a MIL-STD-1553 bus to search on. The search number is specified by x>. The search condition must be set to STATus.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:BIT:SUBSF? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:BIT:SUBSF? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:BIT:SUBSF value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:BIT:SUBSF {ONE|ZERo|NOCARE}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:BIT:SUBSF?
Info
  • ONE filters status words to only match those where the SUBSF bit has a value of 1.
  • ZERo filters status words to only match those where the SUBSF bit has a value of 0.
  • NOCARE disables filtering of status words on the SUBSF bit.

tf property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:BIT:TF command.

Description
  • This command sets or queries the value of the terminal flag bit (TF bit, bit 19) in a status word for a MIL-STD-1553 bus to search on. The search number is specified by x. The search condition must be set to STATus.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:BIT:TF? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:BIT:TF? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:BIT:TF value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:BIT:TF {ONE|ZERo|NOCARE}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:BIT:TF?
Info
  • ONE filters status words to only match those where the TF bit has a value of 1.
  • ZERo filters status words to only match those where the TF bit has a value of 0.
  • NOCARE disables filtering of status words on the TF bit.

SearchSearchItemTriggerABusMil1553bStatusBitBcr

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:BIT:BCR command.

Description
  • This command sets or queries the value of the broadcast command received bit (BCR bit, bit 15) in a status word for a MIL-STD-1553 bus to search on. The search number is specified by x. The search condition must be set to STATus.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:BIT:BCR? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:BIT:BCR? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:BIT:BCR value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:BIT:BCR {ONE|ZERo|NOCARE}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:BIT:BCR?
Info
  • ONE filters status words to only match those where the BCR bit has a value of 1.
  • ZERo filters status words to only match those where the BCR bit has a value of 0.
  • NOCARE disables filtering of status words on the BCR bit.

SearchSearchItemTriggerABusMil1553bStatusBitBusy

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:BIT:BUSY command.

Description
  • This command sets or queries the value of the busy bit (BUSY bit, bit 16) in a status word for a MIL-STD-1553 bus to search on. The search number is specified by x. The search condition must be set to STATus.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:BIT:BUSY? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:BIT:BUSY? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:BIT:BUSY value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:BIT:BUSY {ONE|ZERo|NOCARE}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:BIT:BUSY?
Info
  • ONE filters status words to only match those where the BUSY bit has a value of 1.
  • ZERo filters status words to only match those where the BUSY bit has a value of 0.
  • NOCARE disables filtering of status words on the BUSY bit.

SearchSearchItemTriggerABusMil1553bStatusBitDbca

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:BIT:DBCA command.

Description
  • This command sets or queries the value of the dynamic bus control acceptance bit (DBCA bit, bit 18) in a status word for a MIL-STD-1553 bus to search on. The search number is specified by x. The search condition must be set to STATus.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:BIT:DBCA? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:BIT:DBCA? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:BIT:DBCA value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:BIT:DBCA {ONE|ZERo|NOCARE}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:BIT:DBCA?
Info
  • ONE filters status words to only match those where the DBCA bit has a value of 1.
  • ZERo filters status words to only match those where the DBCA bit has a value of 0.
  • NOCARE disables filtering of status words on the DBCA bit.

SearchSearchItemTriggerABusMil1553bStatusBitInstr

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:BIT:INSTR command.

Description
  • This command sets or queries the value of the instrumentation bit (INSTR bit, bit 10) in a status word for a MIL-STD-1553 bus to search on. The search number is specified by x. The search condition must be set to STATus.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:BIT:INSTR? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:BIT:INSTR? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:BIT:INSTR value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:BIT:INSTR {ONE|ZERo|NOCARE}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:BIT:INSTR?
Info
  • ONE filters status words to only match those where the INSTR bit has a value of 1.
  • ZERo filters status words to only match those where the INSTR bit has a value of 0.
  • NOCARE disables filtering of status words on the INSTR bit.

SearchSearchItemTriggerABusMil1553bStatusBitMe

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:BIT:ME command.

Description
  • This command sets or queries the value of the message error bit (ME bit, bit 9) in a status word for a MIL-STD-1553 bus to search on. The search number is specified by x. The search condition must be set to STATus.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:BIT:ME? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:BIT:ME? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:BIT:ME value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:BIT:ME {ONE|ZERo|NOCARE}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:BIT:ME?
Info
  • ONE filters status words to only match those where the ME bit has a value of 1.
  • ZERo filters status words to only match those where the ME bit has a value of 0.
  • NOCARE disables filtering of status words on the ME bit.

SearchSearchItemTriggerABusMil1553bStatusBitSrq

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:BIT:SRQ command.

Description
  • This command sets or queries the value of the status word service request bit (SRQ bit, bit 11) in a status word for a MIL-STD-1553 bus to search on. The search number is specified by x. The search condition must be set to STATus.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:BIT:SRQ? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:BIT:SRQ? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:BIT:SRQ value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:BIT:SRQ {ONE|ZERo|NOCARE}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:BIT:SRQ?
Info
  • ONE filters status words to only match those where the SRQ bit has a value of 1.
  • ZERo filters status words to only match those where the SRQ bit has a value of 0.
  • NOCARE disables filtering of status words on the SRQ bit.

SearchSearchItemTriggerABusMil1553bStatusBitSubsf

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:BIT:SUBSF command.

Description
  • This command sets or queries the value of the subsystem flag bit (SUBSF bit, bit 17) in a status word for a MIL-STD-1553 bus to search on. The search number is specified by x>. The search condition must be set to STATus.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:BIT:SUBSF? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:BIT:SUBSF? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:BIT:SUBSF value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:BIT:SUBSF {ONE|ZERo|NOCARE}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:BIT:SUBSF?
Info
  • ONE filters status words to only match those where the SUBSF bit has a value of 1.
  • ZERo filters status words to only match those where the SUBSF bit has a value of 0.
  • NOCARE disables filtering of status words on the SUBSF bit.

SearchSearchItemTriggerABusMil1553bStatusBitTf

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:BIT:TF command.

Description
  • This command sets or queries the value of the terminal flag bit (TF bit, bit 19) in a status word for a MIL-STD-1553 bus to search on. The search number is specified by x. The search condition must be set to STATus.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:BIT:TF? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:BIT:TF? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:BIT:TF value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:BIT:TF {ONE|ZERo|NOCARE}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:BIT:TF?
Info
  • ONE filters status words to only match those where the TF bit has a value of 1.
  • ZERo filters status words to only match those where the TF bit has a value of 0.
  • NOCARE disables filtering of status words on the TF bit.

SearchSearchItemTriggerABusMil1553bStatusParity

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:PARity command.

Description
  • This command sets or queries the value of the status word parity bit for a MIL-STD-1553 bus to search on. The search number is specified by x. The search condition must be set to STATus.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:PARity? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:PARity? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:PARity value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:PARity {ONE|ZERo|NOCARE}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:PARity?
Info
  • ONE filters status words to only match those where the parity bit has a value of 1.
  • ZERo filters status words to only match those where the parity bit has a value of 0.
  • NOCARE disables filtering of status words on the parity bit.

SearchSearchItemTriggerABusNfc

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:NFC command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:NFC? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:NFC? query and raise an AssertionError if the returned value does not match value.
Info
  • SEARCH<x> is the number of the search.
Properties
  • .command: The SEARCH:SEARCH<x>:TRIGger:A:BUS:NFC:COMMand command tree.
  • .condition: The SEARCH:SEARCH<x>:TRIGger:A:BUS:NFC:CONDition command.
  • .data: The SEARCH:SEARCH<x>:TRIGger:A:BUS:NFC:DATa command tree.
  • .error: The SEARCH:SEARCH<x>:TRIGger:A:BUS:NFC:ERRor command tree.
  • .payloadbits: The SEARCH:SEARCH<x>:TRIGger:A:BUS:NFC:PAYLOADBITS command.
  • .response: The SEARCH:SEARCH<x>:TRIGger:A:BUS:NFC:RESPonse command tree.
  • .type: The SEARCH:SEARCH<x>:TRIGger:A:BUS:NFC:TYPe command.
  • .uid: The SEARCH:SEARCH<x>:TRIGger:A:BUS:NFC:UID command tree.

command property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:NFC:COMMand command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:NFC:COMMand? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:NFC:COMMand? query and raise an AssertionError if the returned value does not match value.
Info
  • SEARCH<x> is the number of the search.
Sub-properties
  • .code: The SEARCH:SEARCH<x>:TRIGger:A:BUS:NFC:COMMand:CODe command.

condition property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:NFC:CONDition command.

Description
  • This command sets or queries the trigger condition for a NFC bus.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:NFC:CONDition? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:NFC:CONDition? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:NFC:CONDition value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:NFC:CONDition {SOC|SOS|SYNC|CMDCODe|EOC|ERRors|SOF|AFI|PUPi|IDEntifier|UID|EOF|PAYLoad|DATa|RESPCODe|EOS}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:NFC:CONDition?
Info
  • SEARCH<x> is the number of the search.
  • SOC specifies start in 14443A as the field within a NFC frame to search on. The default trigger on condition is SOC for 14443A.
  • SOS specifies start in 14443B and Felica as the field within a NFC frame to search on. The default trigger on condition is SOS for 14443B and Felica.
  • SYNC specifies sync as the field within a NFC frame to search on.
  • CMDCODe specifies command code as the field within a NFC frame to search on.
  • EOC specifies end in 14443A as the field within a NFC frame to search on.
  • ERRors specifies error type as the field within a NFC frame to search on.
  • SOF specifies start in 15693 as the field within a NFC frame to search on. The default trigger on condition is SOF for 15693.
  • AFI specifies AFI as the field within a NFC frame to search on.
  • PUPi specifies PUPi as the field within a NFC frame to search on.
  • IDEntifier specifies identifier as the field within a NFC frame to search on.
  • UID specifies UID as the field within a NFC frame to search on.
  • EOF specifies end in 15693 as the field within a NFC frame to search on.
  • PAYLoad specifies payload as the field within a NFC frame to search on.
  • DATa specifies data as the field within a NFC frame to search on.
  • RESPCODe specifies response code as the field within a NFC frame to search on.
  • EOS specifies end in 14443B and Felica as the field within a NFC frame to search on.

data property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:NFC:DATa command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:NFC:DATa? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:NFC:DATa? query and raise an AssertionError if the returned value does not match value.
Info
  • SEARCH<x> is the number of the search.
Sub-properties
  • .size: The SEARCH:SEARCH<x>:TRIGger:A:BUS:NFC:DATa:SIZe command.
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:NFC:DATa:VALue command.

error property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:NFC:ERRor command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:NFC:ERRor? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:NFC:ERRor? query and raise an AssertionError if the returned value does not match value.
Info
  • SEARCH<x> is the number of the search.
Sub-properties
  • .type: The SEARCH:SEARCH<x>:TRIGger:A:BUS:NFC:ERRor:TYPe command.

payloadbits property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:NFC:PAYLOADBITS command.

Description
  • This command sets or queries the number of payload bits for the specified bus.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:NFC:PAYLOADBITS? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:NFC:PAYLOADBITS? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:NFC:PAYLOADBITS value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:NFC:PAYLOADBITS {EIGHTBIT|SIXTYFOURBIT}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:NFC:PAYLOADBITS?
Info
  • SEARCH<x> is the number of the search.
  • EIGHTBIT sets the trigger condition for NFC bus trigger to Eight Bits.
  • SIXTYFOURBIT sets the trigger condition for NFC bus trigger to Sixty Four Bits.

response property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:NFC:RESPonse command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:NFC:RESPonse? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:NFC:RESPonse? query and raise an AssertionError if the returned value does not match value.
Info
  • SEARCH<x> is the number of the search.
Sub-properties
  • .code: The SEARCH:SEARCH<x>:TRIGger:A:BUS:NFC:RESPonse:CODe command.

type property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:NFC:TYPe command.

Description
  • This command sets or queries the trigger command/response type for a NFC bus.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:NFC:TYPe? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:NFC:TYPe? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:NFC:TYPe value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:NFC:TYPe {COMMand|RESPonse}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:NFC:TYPe?
Info
  • SEARCH<x> is the number of the search.
  • COMMand specifies command code as the type to search on. This is the default trigger.
  • RESPonse specifies response code as the type to search on.

uid property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:NFC:UID command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:NFC:UID? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:NFC:UID? query and raise an AssertionError if the returned value does not match value.
Info
  • SEARCH<x> is the number of the search.
Sub-properties
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:NFC:UID:VALue command.

SearchSearchItemTriggerABusNfcCommand

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:NFC:COMMand command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:NFC:COMMand? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:NFC:COMMand? query and raise an AssertionError if the returned value does not match value.
Info
  • SEARCH<x> is the number of the search.
Properties
  • .code: The SEARCH:SEARCH<x>:TRIGger:A:BUS:NFC:COMMand:CODe command.

code property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:NFC:COMMand:CODe command.

Description
  • This command sets or queries the trigger on command code for a NFC bus.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:NFC:COMMand:CODe? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:NFC:COMMand:CODe? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:NFC:COMMand:CODe value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:NFC:COMMand:CODe {INVentory|STAYQUIet|RFU|RDSBLOCk|WRSBLOCk|LOCKBLOCk|RDMBLOCk|WRMBLOCk|SELECT15693SET|RSTTOREADy|WRITEAFI|LOCKAFI|WRITEDSFID|LOCKDSFID|GETSYSTEMINFo|GETMBSECSYSTem|FRDMBLOCk|EXRDSBLOCk|EXWRSBLOCk|EXLOCKBLOCk|EXRDMBLOCk|AUTHenticate|KEYUPDate|AUTHCRYPto|SECURECRYPto|CHALlenge|READBUFFer|EXGETSYSTINFo|EXGETMBSSTATus|FEXRDMBLOCks|custom|REQa|WUPa|PROPrietary|SELECT14443A|HLTa|REQB|WUPB|SLOTMARKER|ATTRIB|HLTB|ANY|ATRReq|WUPReq|PSLReq|DEPReq|DSLReq|RLSReq}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:NFC:COMMand:CODe?
Info
  • SEARCH<x> is the number of the search.
  • INVentory specifies inventory as the 15693 command code to search on. This is the default command code is for 15693.
  • STAYQUIet specifies STAYQUIet as the 15693 command code to search on.
  • RFU specifies RFU as the 15693 command code to search on.
  • RDSBLOCk specifies RDSBLOCk as the 15693 command code to search on.
  • WRSBLOCk specifies WRSBLOCk as the 15693 command code to search on.
  • LOCKBLOCk specifies LOCKBLOCk as the 15693 command code to search on.
  • RDMBLOCk specifies RDMBLOCk as the 15693 command code to search on.
  • WRMBLOCk specifies WRMBLOCk as the 15693 command code to search on.
  • SELECT15693SET specifies select as the 15693 command code to search on.
  • RSTTOREADy specifies RSTTOREADy as the 15693 command code to search on.
  • WRITEAFI specifies WRITEAFI as the 15693 command code to search on.
  • LOCKAFI specifies LOCKAFI as the 15693 command code to search on.
  • WRITEDSFID specifies WRITEDSFID as the 15693 command code to search on.
  • LOCKDSFID specifies LOCKDSFID as the 15693 command code to search on.
  • GETSYSTEMINFo specifies GETSYSTEMINFo as the 15693 command code to search on.
  • GETMBSECSYSTem specifies GETMBSECSYSTem as the 15693 command code to search on.
  • FRDMBLOCk specifies FRDMBLOCk as the 15693 command code to search on.
  • EXRDSBLOCk specifies EXRDSBLOCk as the 15693 command code to search on.
  • EXWRSBLOCk specifies EXWRSBLOCk as the 15693 command code to search on.
  • EXLOCKBLOCk specifies EXLOCKBLOCk as the 15693 command code to search on.
  • EXRDMBLOCk specifies EXRDMBLOCk as the 15693 command code to search on.
  • AUTHenticate specifies authenticate as the 15693 command code to search on.
  • KEYUPDate specifies KEYUPDate as the 15693 command code to search on.
  • AUTHCRYPto specifies AUTHCRYPto as the 15693 command code to search on.
  • SECURECRYPto specifies SECURECRYPto as the 15693 command code to search on.
  • CHALlenge specifies challenge as the 15693 command code to search on.
  • READBUFFer specifies READBUFFer as the 15693 command code to search on.
  • EXGETSYSTINFo specifies EXGETSYSTINFo as the 15693 command code to search on.
  • EXGETMBSSTATus specifies EXGETMBSSTATus as the 15693 command code to search on.
  • FEXRDMBLOCks specifies FEXRDMBLOCks as the 15693 command code to search on.
  • custom specifies custom as the 15693 command code to search on.
  • ANY specifies ANY as the 15693 command code to search on.
  • REQa specifies REQa as the 14443A command code to search on. This is the default command code is for 14443A.
  • WUPa specifies WUPa as the 14443A command code to search on.
  • PROPrietary specifies proprietary as the 14443A command code to search on.
  • SELECT14443A specifies select as the 14443A command code to search on.
  • HLTa specifies HLTa as the 14443A command code to search on.
  • REQB specifies REQB as the 14443B command code to search on. This is the default command code is for 14443B.
  • WUPB specifies WUPB as the 14443B command code to search on.
  • SLOTMARKER specifies SLOTMARKER as the 14443B command code to search on.
  • ATTRIB specifies ATTRIB as the 14443B command code to search on.
  • HLTB specifies HLTB as the 14443B command code to search on.
  • ATRReq specifies ATRReq as the FeliCa command code to search on. This is the default command code is for FeliCa.
  • WUPReq specifies WUPReq as the FeliCa command code to search on.
  • PSLReq specifies PSLReq as the FeliCa command code to search on.
  • DEPReq specifies DEPReq as the FeliCa command code to search on.
  • DSLReq specifies DSLReq as the FeliCa command code to search on.
  • RLSReq specifies RLSReq as the FeliCa command code to search on.

SearchSearchItemTriggerABusNfcCommandCode

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:NFC:COMMand:CODe command.

Description
  • This command sets or queries the trigger on command code for a NFC bus.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:NFC:COMMand:CODe? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:NFC:COMMand:CODe? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:NFC:COMMand:CODe value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:NFC:COMMand:CODe {INVentory|STAYQUIet|RFU|RDSBLOCk|WRSBLOCk|LOCKBLOCk|RDMBLOCk|WRMBLOCk|SELECT15693SET|RSTTOREADy|WRITEAFI|LOCKAFI|WRITEDSFID|LOCKDSFID|GETSYSTEMINFo|GETMBSECSYSTem|FRDMBLOCk|EXRDSBLOCk|EXWRSBLOCk|EXLOCKBLOCk|EXRDMBLOCk|AUTHenticate|KEYUPDate|AUTHCRYPto|SECURECRYPto|CHALlenge|READBUFFer|EXGETSYSTINFo|EXGETMBSSTATus|FEXRDMBLOCks|custom|REQa|WUPa|PROPrietary|SELECT14443A|HLTa|REQB|WUPB|SLOTMARKER|ATTRIB|HLTB|ANY|ATRReq|WUPReq|PSLReq|DEPReq|DSLReq|RLSReq}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:NFC:COMMand:CODe?
Info
  • SEARCH<x> is the number of the search.
  • INVentory specifies inventory as the 15693 command code to search on. This is the default command code is for 15693.
  • STAYQUIet specifies STAYQUIet as the 15693 command code to search on.
  • RFU specifies RFU as the 15693 command code to search on.
  • RDSBLOCk specifies RDSBLOCk as the 15693 command code to search on.
  • WRSBLOCk specifies WRSBLOCk as the 15693 command code to search on.
  • LOCKBLOCk specifies LOCKBLOCk as the 15693 command code to search on.
  • RDMBLOCk specifies RDMBLOCk as the 15693 command code to search on.
  • WRMBLOCk specifies WRMBLOCk as the 15693 command code to search on.
  • SELECT15693SET specifies select as the 15693 command code to search on.
  • RSTTOREADy specifies RSTTOREADy as the 15693 command code to search on.
  • WRITEAFI specifies WRITEAFI as the 15693 command code to search on.
  • LOCKAFI specifies LOCKAFI as the 15693 command code to search on.
  • WRITEDSFID specifies WRITEDSFID as the 15693 command code to search on.
  • LOCKDSFID specifies LOCKDSFID as the 15693 command code to search on.
  • GETSYSTEMINFo specifies GETSYSTEMINFo as the 15693 command code to search on.
  • GETMBSECSYSTem specifies GETMBSECSYSTem as the 15693 command code to search on.
  • FRDMBLOCk specifies FRDMBLOCk as the 15693 command code to search on.
  • EXRDSBLOCk specifies EXRDSBLOCk as the 15693 command code to search on.
  • EXWRSBLOCk specifies EXWRSBLOCk as the 15693 command code to search on.
  • EXLOCKBLOCk specifies EXLOCKBLOCk as the 15693 command code to search on.
  • EXRDMBLOCk specifies EXRDMBLOCk as the 15693 command code to search on.
  • AUTHenticate specifies authenticate as the 15693 command code to search on.
  • KEYUPDate specifies KEYUPDate as the 15693 command code to search on.
  • AUTHCRYPto specifies AUTHCRYPto as the 15693 command code to search on.
  • SECURECRYPto specifies SECURECRYPto as the 15693 command code to search on.
  • CHALlenge specifies challenge as the 15693 command code to search on.
  • READBUFFer specifies READBUFFer as the 15693 command code to search on.
  • EXGETSYSTINFo specifies EXGETSYSTINFo as the 15693 command code to search on.
  • EXGETMBSSTATus specifies EXGETMBSSTATus as the 15693 command code to search on.
  • FEXRDMBLOCks specifies FEXRDMBLOCks as the 15693 command code to search on.
  • custom specifies custom as the 15693 command code to search on.
  • ANY specifies ANY as the 15693 command code to search on.
  • REQa specifies REQa as the 14443A command code to search on. This is the default command code is for 14443A.
  • WUPa specifies WUPa as the 14443A command code to search on.
  • PROPrietary specifies proprietary as the 14443A command code to search on.
  • SELECT14443A specifies select as the 14443A command code to search on.
  • HLTa specifies HLTa as the 14443A command code to search on.
  • REQB specifies REQB as the 14443B command code to search on. This is the default command code is for 14443B.
  • WUPB specifies WUPB as the 14443B command code to search on.
  • SLOTMARKER specifies SLOTMARKER as the 14443B command code to search on.
  • ATTRIB specifies ATTRIB as the 14443B command code to search on.
  • HLTB specifies HLTB as the 14443B command code to search on.
  • ATRReq specifies ATRReq as the FeliCa command code to search on. This is the default command code is for FeliCa.
  • WUPReq specifies WUPReq as the FeliCa command code to search on.
  • PSLReq specifies PSLReq as the FeliCa command code to search on.
  • DEPReq specifies DEPReq as the FeliCa command code to search on.
  • DSLReq specifies DSLReq as the FeliCa command code to search on.
  • RLSReq specifies RLSReq as the FeliCa command code to search on.

SearchSearchItemTriggerABusNfcCondition

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:NFC:CONDition command.

Description
  • This command sets or queries the trigger condition for a NFC bus.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:NFC:CONDition? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:NFC:CONDition? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:NFC:CONDition value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:NFC:CONDition {SOC|SOS|SYNC|CMDCODe|EOC|ERRors|SOF|AFI|PUPi|IDEntifier|UID|EOF|PAYLoad|DATa|RESPCODe|EOS}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:NFC:CONDition?
Info
  • SEARCH<x> is the number of the search.
  • SOC specifies start in 14443A as the field within a NFC frame to search on. The default trigger on condition is SOC for 14443A.
  • SOS specifies start in 14443B and Felica as the field within a NFC frame to search on. The default trigger on condition is SOS for 14443B and Felica.
  • SYNC specifies sync as the field within a NFC frame to search on.
  • CMDCODe specifies command code as the field within a NFC frame to search on.
  • EOC specifies end in 14443A as the field within a NFC frame to search on.
  • ERRors specifies error type as the field within a NFC frame to search on.
  • SOF specifies start in 15693 as the field within a NFC frame to search on. The default trigger on condition is SOF for 15693.
  • AFI specifies AFI as the field within a NFC frame to search on.
  • PUPi specifies PUPi as the field within a NFC frame to search on.
  • IDEntifier specifies identifier as the field within a NFC frame to search on.
  • UID specifies UID as the field within a NFC frame to search on.
  • EOF specifies end in 15693 as the field within a NFC frame to search on.
  • PAYLoad specifies payload as the field within a NFC frame to search on.
  • DATa specifies data as the field within a NFC frame to search on.
  • RESPCODe specifies response code as the field within a NFC frame to search on.
  • EOS specifies end in 14443B and Felica as the field within a NFC frame to search on.

SearchSearchItemTriggerABusNfcData

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:NFC:DATa command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:NFC:DATa? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:NFC:DATa? query and raise an AssertionError if the returned value does not match value.
Info
  • SEARCH<x> is the number of the search.
Properties
  • .size: The SEARCH:SEARCH<x>:TRIGger:A:BUS:NFC:DATa:SIZe command.
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:NFC:DATa:VALue command.

size property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:NFC:DATa:SIZe command.

Description
  • This command specifies the length of the data string in bytes to be used for an NFC trigger if the trigger condition is DATA.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:NFC:DATa:SIZe? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:NFC:DATa:SIZe? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:NFC:DATa:SIZe value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:NFC:DATa:SIZe <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:NFC:DATa:SIZe?
Info
  • SEARCH<x> is the number of the search.
  • <NR1> specifies the data string in a valid format. The minimum and default value is 1. The maximum value is 5.

value property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:NFC:DATa:VALue command.

Description
  • This command specifies the binary data string used for NFC triggering if the trigger condition is DATA.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:NFC:DATa:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:NFC:DATa:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:NFC:DATa:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:NFC:DATa:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:NFC:DATa:VALue?
Info
  • SEARCH<x> is the number of the search.
  • <QString> specifies the data value in a valid format.

SearchSearchItemTriggerABusNfcDataSize

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:NFC:DATa:SIZe command.

Description
  • This command specifies the length of the data string in bytes to be used for an NFC trigger if the trigger condition is DATA.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:NFC:DATa:SIZe? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:NFC:DATa:SIZe? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:NFC:DATa:SIZe value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:NFC:DATa:SIZe <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:NFC:DATa:SIZe?
Info
  • SEARCH<x> is the number of the search.
  • <NR1> specifies the data string in a valid format. The minimum and default value is 1. The maximum value is 5.

SearchSearchItemTriggerABusNfcDataValue

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:NFC:DATa:VALue command.

Description
  • This command specifies the binary data string used for NFC triggering if the trigger condition is DATA.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:NFC:DATa:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:NFC:DATa:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:NFC:DATa:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:NFC:DATa:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:NFC:DATa:VALue?
Info
  • SEARCH<x> is the number of the search.
  • <QString> specifies the data value in a valid format.

SearchSearchItemTriggerABusNfcError

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:NFC:ERRor command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:NFC:ERRor? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:NFC:ERRor? query and raise an AssertionError if the returned value does not match value.
Info
  • SEARCH<x> is the number of the search.
Properties
  • .type: The SEARCH:SEARCH<x>:TRIGger:A:BUS:NFC:ERRor:TYPe command.

type property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:NFC:ERRor:TYPe command.

Description
  • This command sets or queries the error type for NFC bus.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:NFC:ERRor:TYPe? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:NFC:ERRor:TYPe? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:NFC:ERRor:TYPe value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:NFC:ERRor:TYPe {ANY|PARity|CRC}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:NFC:ERRor:TYPe?
Info
  • SEARCH<x> is the number of the search.
  • ANY searches any error. Applicable for 14443A.
  • PARity searches parity error. Applicable only for 14443A.
  • CRC searches CRC error. Applicable for all standards.

SearchSearchItemTriggerABusNfcErrorType

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:NFC:ERRor:TYPe command.

Description
  • This command sets or queries the error type for NFC bus.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:NFC:ERRor:TYPe? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:NFC:ERRor:TYPe? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:NFC:ERRor:TYPe value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:NFC:ERRor:TYPe {ANY|PARity|CRC}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:NFC:ERRor:TYPe?
Info
  • SEARCH<x> is the number of the search.
  • ANY searches any error. Applicable for 14443A.
  • PARity searches parity error. Applicable only for 14443A.
  • CRC searches CRC error. Applicable for all standards.

SearchSearchItemTriggerABusNfcPayloadbits

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:NFC:PAYLOADBITS command.

Description
  • This command sets or queries the number of payload bits for the specified bus.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:NFC:PAYLOADBITS? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:NFC:PAYLOADBITS? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:NFC:PAYLOADBITS value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:NFC:PAYLOADBITS {EIGHTBIT|SIXTYFOURBIT}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:NFC:PAYLOADBITS?
Info
  • SEARCH<x> is the number of the search.
  • EIGHTBIT sets the trigger condition for NFC bus trigger to Eight Bits.
  • SIXTYFOURBIT sets the trigger condition for NFC bus trigger to Sixty Four Bits.

SearchSearchItemTriggerABusNfcResponse

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:NFC:RESPonse command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:NFC:RESPonse? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:NFC:RESPonse? query and raise an AssertionError if the returned value does not match value.
Info
  • SEARCH<x> is the number of the search.
Properties
  • .code: The SEARCH:SEARCH<x>:TRIGger:A:BUS:NFC:RESPonse:CODe command.

code property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:NFC:RESPonse:CODe command.

Description
  • This command sets or queries the trigger on response code for a NFC bus.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:NFC:RESPonse:CODe? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:NFC:RESPonse:CODe? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:NFC:RESPonse:CODe value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:NFC:RESPonse:CODe {SAK|ATQA|ATQBPROP|ATQBCOMP|HLTB|ANY|ATRRes|WUPRes|PSLRes|DEPRes|DSLRes|RLSRes}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:NFC:RESPonse:CODe?
Info
  • SEARCH<x> is the number of the search.
  • SAK specifies SAK as the response code for 14443A to search on. The default response code is SAK for 14443A.
  • ATQa specifies ATQa as the response code for 14443A to search on.
  • ATQBPROP specifies ATQBPROP as the response code for 14443B to search on. The default response code is ATQBPROP for 14443B.
  • ATQBCOMP specifies ATQBCOMP as the response codefor 14443B to search on.
  • HLTB specifies HLTB as the response code for 14443B to search on.
  • ANY specifies ANY as the response code for 14443B to search on.
  • ATRRes specifies ATRRes as the response code for FeliCa to search on. The default response code is ATRRes for FeliCa.
  • WUPRes specifies WUPRes as the response code for FeliCa to search on.
  • PSLRes specifies PSLRes as the response code for FeliCa to search on.
  • DEPRes specifies DEPRes as the response code for FeliCa to search on.
  • DSLRes specifies DSLRes as the response code for FeliCa to search on.
  • RLSRes specifies RLSRes as the response code for FeliCa to search on.

SearchSearchItemTriggerABusNfcResponseCode

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:NFC:RESPonse:CODe command.

Description
  • This command sets or queries the trigger on response code for a NFC bus.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:NFC:RESPonse:CODe? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:NFC:RESPonse:CODe? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:NFC:RESPonse:CODe value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:NFC:RESPonse:CODe {SAK|ATQA|ATQBPROP|ATQBCOMP|HLTB|ANY|ATRRes|WUPRes|PSLRes|DEPRes|DSLRes|RLSRes}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:NFC:RESPonse:CODe?
Info
  • SEARCH<x> is the number of the search.
  • SAK specifies SAK as the response code for 14443A to search on. The default response code is SAK for 14443A.
  • ATQa specifies ATQa as the response code for 14443A to search on.
  • ATQBPROP specifies ATQBPROP as the response code for 14443B to search on. The default response code is ATQBPROP for 14443B.
  • ATQBCOMP specifies ATQBCOMP as the response codefor 14443B to search on.
  • HLTB specifies HLTB as the response code for 14443B to search on.
  • ANY specifies ANY as the response code for 14443B to search on.
  • ATRRes specifies ATRRes as the response code for FeliCa to search on. The default response code is ATRRes for FeliCa.
  • WUPRes specifies WUPRes as the response code for FeliCa to search on.
  • PSLRes specifies PSLRes as the response code for FeliCa to search on.
  • DEPRes specifies DEPRes as the response code for FeliCa to search on.
  • DSLRes specifies DSLRes as the response code for FeliCa to search on.
  • RLSRes specifies RLSRes as the response code for FeliCa to search on.

SearchSearchItemTriggerABusNfcType

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:NFC:TYPe command.

Description
  • This command sets or queries the trigger command/response type for a NFC bus.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:NFC:TYPe? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:NFC:TYPe? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:NFC:TYPe value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:NFC:TYPe {COMMand|RESPonse}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:NFC:TYPe?
Info
  • SEARCH<x> is the number of the search.
  • COMMand specifies command code as the type to search on. This is the default trigger.
  • RESPonse specifies response code as the type to search on.

SearchSearchItemTriggerABusNfcUid

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:NFC:UID command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:NFC:UID? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:NFC:UID? query and raise an AssertionError if the returned value does not match value.
Info
  • SEARCH<x> is the number of the search.
Properties
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:NFC:UID:VALue command.

value property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:NFC:UID:VALue command.

Description
  • This command specifies the binary data string used for NFC triggering if the trigger condition is UID.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:NFC:UID:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:NFC:UID:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:NFC:UID:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:NFC:UID:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:NFC:UID:VALue?
Info
  • SEARCH<x> is the number of the search.
  • <QString> specifies the data value in a valid format. The value for 15693 the UID is 64 bits. The value for 14443A the UID is 8 bits.

SearchSearchItemTriggerABusNfcUidValue

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:NFC:UID:VALue command.

Description
  • This command specifies the binary data string used for NFC triggering if the trigger condition is UID.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:NFC:UID:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:NFC:UID:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:NFC:UID:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:NFC:UID:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:NFC:UID:VALue?
Info
  • SEARCH<x> is the number of the search.
  • <QString> specifies the data value in a valid format. The value for 15693 the UID is 64 bits. The value for 14443A the UID is 8 bits.

SearchSearchItemTriggerABusNrz

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:NRZ command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:NRZ? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:NRZ? query and raise an AssertionError if the returned value does not match value.
Info
  • SEARCH<x> is the number of the search.
Properties
  • .condition: The SEARCH:SEARCH<x>:TRIGger:A:BUS:NRZ:CONDition command.
  • .data: The SEARCH:SEARCH<x>:TRIGger:A:BUS:NRZ:DATa command tree.

condition property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:NRZ:CONDition command.

Description
  • This command specifies a field or condition for an NRZ bus to search on. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:NRZ:CONDition? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:NRZ:CONDition? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:NRZ:CONDition value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:NRZ:CONDition {DATa}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:NRZ:CONDition?
Info
  • SEARCH<x> is the number of the search.
  • DATa specifies the search condition as Data Characters.

data property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:NRZ:DATa command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:NRZ:DATa? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:NRZ:DATa? query and raise an AssertionError if the returned value does not match value.
Info
  • SEARCH<x> is the number of the search.
Sub-properties
  • .size: The SEARCH:SEARCH<x>:TRIGger:A:BUS:NRZ:DATa:SIZe command.
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:NRZ:DATa:VALue command.

SearchSearchItemTriggerABusNrzCondition

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:NRZ:CONDition command.

Description
  • This command specifies a field or condition for an NRZ bus to search on. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:NRZ:CONDition? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:NRZ:CONDition? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:NRZ:CONDition value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:NRZ:CONDition {DATa}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:NRZ:CONDition?
Info
  • SEARCH<x> is the number of the search.
  • DATa specifies the search condition as Data Characters.

SearchSearchItemTriggerABusNrzData

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:NRZ:DATa command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:NRZ:DATa? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:NRZ:DATa? query and raise an AssertionError if the returned value does not match value.
Info
  • SEARCH<x> is the number of the search.
Properties
  • .size: The SEARCH:SEARCH<x>:TRIGger:A:BUS:NRZ:DATa:SIZe command.
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:NRZ:DATa:VALue command.

size property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:NRZ:DATa:SIZe command.

Description
  • This command specifies the length of the data string, in bytes, to use when searching on the NRZ signal. The search condition needs to be set to DATa. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:NRZ:DATa:SIZe? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:NRZ:DATa:SIZe? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:NRZ:DATa:SIZe value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:NRZ:DATa:SIZe <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:NRZ:DATa:SIZe?
Info
  • SEARCH<x> is the number of the search.
  • <NR1> specifies the data string in a valid format. The minimum and default values are 1. The maximum value is 5.

value property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:NRZ:DATa:VALue command.

Description
  • This command sets or queries the binary data value to be used when searching on a NRZ signal. The search condition must be set to DATA.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:NRZ:DATa:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:NRZ:DATa:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:NRZ:DATa:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:NRZ:DATa:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:NRZ:DATa:VALue?
Info
  • SEARCH<x> is the number of the search.
  • <QString> specifies the data value in a valid format.

SearchSearchItemTriggerABusNrzDataSize

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:NRZ:DATa:SIZe command.

Description
  • This command specifies the length of the data string, in bytes, to use when searching on the NRZ signal. The search condition needs to be set to DATa. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:NRZ:DATa:SIZe? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:NRZ:DATa:SIZe? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:NRZ:DATa:SIZe value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:NRZ:DATa:SIZe <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:NRZ:DATa:SIZe?
Info
  • SEARCH<x> is the number of the search.
  • <NR1> specifies the data string in a valid format. The minimum and default values are 1. The maximum value is 5.

SearchSearchItemTriggerABusNrzDataValue

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:NRZ:DATa:VALue command.

Description
  • This command sets or queries the binary data value to be used when searching on a NRZ signal. The search condition must be set to DATA.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:NRZ:DATa:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:NRZ:DATa:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:NRZ:DATa:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:NRZ:DATa:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:NRZ:DATa:VALue?
Info
  • SEARCH<x> is the number of the search.
  • <QString> specifies the data value in a valid format.

SearchSearchItemTriggerABusOnewire

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe? query and raise an AssertionError if the returned value does not match value.
Info
  • SEARCH<x> is the number of the search.
Properties
  • .command: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:COMMand command tree.
  • .condition: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:CONDition command.
  • .data: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:DATa command tree.
  • .matchrom: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:MATCHROM command tree.
  • .overdrive: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:OVERDRIVe command tree.
  • .readrom: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:READROM command tree.
  • .searchrom: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:SEARCHROM command tree.

command property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:COMMand command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:COMMand? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:COMMand? query and raise an AssertionError if the returned value does not match value.
Info
  • SEARCH<x> is the number of the search.
Sub-properties
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:COMMand:VALue command.

condition property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:CONDition command.

Description
  • This command sets or queries the trigger condition for a ONEWIRe bus. MODe should be set to Overdrive for OVERDRIVEMATCh and OVERDRIVESKIP. MODe should be set to Standard for READROM, MATCHROM, SKIPROM, SEARCHROM, ALARMSEARch. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:CONDition? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:CONDition? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:CONDition value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:CONDition {RESet|PREsence|COMMand|DATa|READROM|MATCHROM|OVERDRIVEMATCh|SKIPROM|OVERDRIVESKIP|SEARCHROM|ALARMSEARch|CRCERRor}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:CONDition?
Info
  • SEARCH<x> is the number of the search.
  • RESet specifies the search condition as RESet. Reset is the default trigger on condition.
  • PREsence specifies the search condition as PREsence.
  • COMMand specifies the search condition as COMMand.
  • DATa specifies the search condition as DATa.
  • READROM specifies the search condition as READROM.
  • MATCHROM specifies the search condition as MATCHROM.
  • SKIPROM specifies the search condition as SKIPROM.
  • SEARCHROM specifies the search condition as SEARCHROM.
  • ALARMSEARch specifies the search condition as ALARMSEARch.
  • CRCERRor specifies the search condition as CRCERRor.

data property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:DATa command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:DATa? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:DATa? query and raise an AssertionError if the returned value does not match value.
Info
  • SEARCH<x> is the number of the search.
Sub-properties
  • .size: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:DATa:SIZe command.
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:DATa:VALue command.

matchrom property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:MATCHROM command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:MATCHROM? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:MATCHROM? query and raise an AssertionError if the returned value does not match value.
Info
  • SEARCH<x> is the number of the search.
Sub-properties
  • .familycode: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:MATCHROM:FAMILYCODe command.
  • .serialnumber: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:MATCHROM:SERIALNUMBer command.

overdrive property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:OVERDRIVe command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:OVERDRIVe? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:OVERDRIVe? query and raise an AssertionError if the returned value does not match value.
Info
  • SEARCH<x> is the number of the search.
Sub-properties
  • .familycode: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:OVERDRIVe:FAMILYCODe command.
  • .serialnumber: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:OVERDRIVe:SERIALNUMBer command.

readrom property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:READROM command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:READROM? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:READROM? query and raise an AssertionError if the returned value does not match value.
Info
  • SEARCH<x> is the number of the search.
Sub-properties
  • .familycode: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:READROM:FAMILYCODe command.
  • .serialnumber: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:READROM:SERIALNUMBer command.

searchrom property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:SEARCHROM command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:SEARCHROM? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:SEARCHROM? query and raise an AssertionError if the returned value does not match value.
Info
  • SEARCH<x> is the number of the search.
Sub-properties
  • .romcode: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:SEARCHROM:ROMCODe command.

SearchSearchItemTriggerABusOnewireCommand

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:COMMand command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:COMMand? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:COMMand? query and raise an AssertionError if the returned value does not match value.
Info
  • SEARCH<x> is the number of the search.
Properties
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:COMMand:VALue command.

value property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:COMMand:VALue command.

Description
  • This command specifies the binary data string used for ONEWIRe triggering if the trigger condition is COMMAND.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:COMMand:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:COMMand:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:COMMand:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:COMMand:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:COMMand:VALue?
Info
  • SEARCH<x> is the number of the search.
  • <QString> specifies the data value in a valid format. The default size and value for COMMAND is 8 bits and ‘XXXXXXXX’.

SearchSearchItemTriggerABusOnewireCommandValue

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:COMMand:VALue command.

Description
  • This command specifies the binary data string used for ONEWIRe triggering if the trigger condition is COMMAND.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:COMMand:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:COMMand:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:COMMand:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:COMMand:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:COMMand:VALue?
Info
  • SEARCH<x> is the number of the search.
  • <QString> specifies the data value in a valid format. The default size and value for COMMAND is 8 bits and ‘XXXXXXXX’.

SearchSearchItemTriggerABusOnewireCondition

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:CONDition command.

Description
  • This command sets or queries the trigger condition for a ONEWIRe bus. MODe should be set to Overdrive for OVERDRIVEMATCh and OVERDRIVESKIP. MODe should be set to Standard for READROM, MATCHROM, SKIPROM, SEARCHROM, ALARMSEARch. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:CONDition? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:CONDition? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:CONDition value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:CONDition {RESet|PREsence|COMMand|DATa|READROM|MATCHROM|OVERDRIVEMATCh|SKIPROM|OVERDRIVESKIP|SEARCHROM|ALARMSEARch|CRCERRor}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:CONDition?
Info
  • SEARCH<x> is the number of the search.
  • RESet specifies the search condition as RESet. Reset is the default trigger on condition.
  • PREsence specifies the search condition as PREsence.
  • COMMand specifies the search condition as COMMand.
  • DATa specifies the search condition as DATa.
  • READROM specifies the search condition as READROM.
  • MATCHROM specifies the search condition as MATCHROM.
  • SKIPROM specifies the search condition as SKIPROM.
  • SEARCHROM specifies the search condition as SEARCHROM.
  • ALARMSEARch specifies the search condition as ALARMSEARch.
  • CRCERRor specifies the search condition as CRCERRor.

SearchSearchItemTriggerABusOnewireData

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:DATa command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:DATa? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:DATa? query and raise an AssertionError if the returned value does not match value.
Info
  • SEARCH<x> is the number of the search.
Properties
  • .size: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:DATa:SIZe command.
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:DATa:VALue command.

size property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:DATa:SIZe command.

Description
  • This command specifies the length of the data string in bytes to be used for ONEWIRe triggering if the trigger condition is DATA. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:DATa:SIZe? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:DATa:SIZe? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:DATa:SIZe value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:DATa:SIZe <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:DATa:SIZe?
Info
  • SEARCH<x> is the number of the search.
  • <NR1> specifies the data string in a valid format. The minimum and default values are 1. The maximum value is 5.

value property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:DATa:VALue command.

Description
  • This command specifies the binary data string used for ONEWIRe triggering if the trigger condition is DATA.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:DATa:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:DATa:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:DATa:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:DATa:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:DATa:VALue?
Info
  • SEARCH<x> is the number of the search.
  • <QString> specifies the data value in a valid format. The default size and value for DATA is 8 bits and ‘XXXXXXXX’.

SearchSearchItemTriggerABusOnewireDataSize

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:DATa:SIZe command.

Description
  • This command specifies the length of the data string in bytes to be used for ONEWIRe triggering if the trigger condition is DATA. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:DATa:SIZe? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:DATa:SIZe? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:DATa:SIZe value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:DATa:SIZe <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:DATa:SIZe?
Info
  • SEARCH<x> is the number of the search.
  • <NR1> specifies the data string in a valid format. The minimum and default values are 1. The maximum value is 5.

SearchSearchItemTriggerABusOnewireDataValue

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:DATa:VALue command.

Description
  • This command specifies the binary data string used for ONEWIRe triggering if the trigger condition is DATA.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:DATa:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:DATa:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:DATa:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:DATa:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:DATa:VALue?
Info
  • SEARCH<x> is the number of the search.
  • <QString> specifies the data value in a valid format. The default size and value for DATA is 8 bits and ‘XXXXXXXX’.

SearchSearchItemTriggerABusOnewireMatchrom

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:MATCHROM command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:MATCHROM? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:MATCHROM? query and raise an AssertionError if the returned value does not match value.
Info
  • SEARCH<x> is the number of the search.
Properties
  • .familycode: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:MATCHROM:FAMILYCODe command.
  • .serialnumber: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:MATCHROM:SERIALNUMBer command.

familycode property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:MATCHROM:FAMILYCODe command.

Description
  • This command sets or queries the family code for Match ROM in ONEWIRE bus. MODe should be set to Standard.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:MATCHROM:FAMILYCODe? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:MATCHROM:FAMILYCODe? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:MATCHROM:FAMILYCODe value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:MATCHROM:FAMILYCODe <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:MATCHROM:FAMILYCODe?
Info
  • SEARCH<x> is the number of the search.
  • <QString> specifies the binary string used for Family Code triggering. The default size and value of family code for Match ROM is 8 bits and ‘XXXXXXXX’.

serialnumber property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:MATCHROM:SERIALNUMBer command.

Description
  • This command sets or queries the serial number for Match ROM in ONEWIRE bus. MODe should be set to Standard.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:MATCHROM:SERIALNUMBer? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:MATCHROM:SERIALNUMBer? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:MATCHROM:SERIALNUMBer value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:MATCHROM:SERIALNUMBer <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:MATCHROM:SERIALNUMBer?
Info
  • SEARCH<x> is the number of the search.
  • <QString> specifies the binary string used for Serial Number triggering. The default size and value of serial number for Match ROM is 48 bits and ‘XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX’.

SearchSearchItemTriggerABusOnewireMatchromFamilycode

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:MATCHROM:FAMILYCODe command.

Description
  • This command sets or queries the family code for Match ROM in ONEWIRE bus. MODe should be set to Standard.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:MATCHROM:FAMILYCODe? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:MATCHROM:FAMILYCODe? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:MATCHROM:FAMILYCODe value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:MATCHROM:FAMILYCODe <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:MATCHROM:FAMILYCODe?
Info
  • SEARCH<x> is the number of the search.
  • <QString> specifies the binary string used for Family Code triggering. The default size and value of family code for Match ROM is 8 bits and ‘XXXXXXXX’.

SearchSearchItemTriggerABusOnewireMatchromSerialnumber

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:MATCHROM:SERIALNUMBer command.

Description
  • This command sets or queries the serial number for Match ROM in ONEWIRE bus. MODe should be set to Standard.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:MATCHROM:SERIALNUMBer? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:MATCHROM:SERIALNUMBer? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:MATCHROM:SERIALNUMBer value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:MATCHROM:SERIALNUMBer <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:MATCHROM:SERIALNUMBer?
Info
  • SEARCH<x> is the number of the search.
  • <QString> specifies the binary string used for Serial Number triggering. The default size and value of serial number for Match ROM is 48 bits and ‘XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX’.

SearchSearchItemTriggerABusOnewireOverdrive

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:OVERDRIVe command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:OVERDRIVe? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:OVERDRIVe? query and raise an AssertionError if the returned value does not match value.
Info
  • SEARCH<x> is the number of the search.
Properties
  • .familycode: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:OVERDRIVe:FAMILYCODe command.
  • .serialnumber: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:OVERDRIVe:SERIALNUMBer command.

familycode property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:OVERDRIVe:FAMILYCODe command.

Description
  • This command sets or queries the Family Code for Overdrive Match ROM in ONEWIRE bus. MODe should be set to Overdrive.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:OVERDRIVe:FAMILYCODe? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:OVERDRIVe:FAMILYCODe? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:OVERDRIVe:FAMILYCODe value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:OVERDRIVe:FAMILYCODe <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:OVERDRIVe:FAMILYCODe?
Info
  • SEARCH<x> is the number of the search.
  • <QString> specifies the binary string used for Family Code triggering. The default size and value of family code for Overdrive match ROM is 8 bits and ‘XXXXXXXX’.

serialnumber property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:OVERDRIVe:SERIALNUMBer command.

Description
  • This command sets or queries the serial number for Overdrive Match ROM in ONEWIRE bus. MODe should be set to Overdrive.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:OVERDRIVe:SERIALNUMBer? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:OVERDRIVe:SERIALNUMBer? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:OVERDRIVe:SERIALNUMBer value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:OVERDRIVe:SERIALNUMBer <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:OVERDRIVe:SERIALNUMBer?
Info
  • SEARCH<x> is the number of the search.
  • <QString> specifies the binary string used for Serial Number triggering. The default size and value of serial number for Overdrive match ROM is 48 bits and ‘XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX’.

SearchSearchItemTriggerABusOnewireOverdriveFamilycode

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:OVERDRIVe:FAMILYCODe command.

Description
  • This command sets or queries the Family Code for Overdrive Match ROM in ONEWIRE bus. MODe should be set to Overdrive.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:OVERDRIVe:FAMILYCODe? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:OVERDRIVe:FAMILYCODe? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:OVERDRIVe:FAMILYCODe value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:OVERDRIVe:FAMILYCODe <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:OVERDRIVe:FAMILYCODe?
Info
  • SEARCH<x> is the number of the search.
  • <QString> specifies the binary string used for Family Code triggering. The default size and value of family code for Overdrive match ROM is 8 bits and ‘XXXXXXXX’.

SearchSearchItemTriggerABusOnewireOverdriveSerialnumber

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:OVERDRIVe:SERIALNUMBer command.

Description
  • This command sets or queries the serial number for Overdrive Match ROM in ONEWIRE bus. MODe should be set to Overdrive.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:OVERDRIVe:SERIALNUMBer? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:OVERDRIVe:SERIALNUMBer? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:OVERDRIVe:SERIALNUMBer value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:OVERDRIVe:SERIALNUMBer <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:OVERDRIVe:SERIALNUMBer?
Info
  • SEARCH<x> is the number of the search.
  • <QString> specifies the binary string used for Serial Number triggering. The default size and value of serial number for Overdrive match ROM is 48 bits and ‘XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX’.

SearchSearchItemTriggerABusOnewireReadrom

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:READROM command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:READROM? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:READROM? query and raise an AssertionError if the returned value does not match value.
Info
  • SEARCH<x> is the number of the search.
Properties
  • .familycode: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:READROM:FAMILYCODe command.
  • .serialnumber: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:READROM:SERIALNUMBer command.

familycode property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:READROM:FAMILYCODe command.

Description
  • This command sets or queries the family code for Read ROM in ONEWIRE bus. MODe should be set to Standard.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:READROM:FAMILYCODe? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:READROM:FAMILYCODe? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:READROM:FAMILYCODe value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:READROM:FAMILYCODe <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:READROM:FAMILYCODe?
Info
  • SEARCH<x> is the number of the search.
  • <QString> specifies the binary string used for Family Code triggering. The default size and value of family code for Read ROM is 8 bits and ‘XXXXXXXX’.

serialnumber property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:READROM:SERIALNUMBer command.

Description
  • This command sets or queries the serial number for Read ROM in ONEWIRE bus. MODe should be set to Standard.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:READROM:SERIALNUMBer? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:READROM:SERIALNUMBer? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:READROM:SERIALNUMBer value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:READROM:SERIALNUMBer <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:READROM:SERIALNUMBer?
Info
  • SEARCH<x> is the number of the search.
  • <QString> specifies the binary string used for Serial Number triggering. The default size and value of serial number for Read ROM is 48 bits and ‘XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX’.

SearchSearchItemTriggerABusOnewireReadromFamilycode

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:READROM:FAMILYCODe command.

Description
  • This command sets or queries the family code for Read ROM in ONEWIRE bus. MODe should be set to Standard.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:READROM:FAMILYCODe? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:READROM:FAMILYCODe? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:READROM:FAMILYCODe value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:READROM:FAMILYCODe <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:READROM:FAMILYCODe?
Info
  • SEARCH<x> is the number of the search.
  • <QString> specifies the binary string used for Family Code triggering. The default size and value of family code for Read ROM is 8 bits and ‘XXXXXXXX’.

SearchSearchItemTriggerABusOnewireReadromSerialnumber

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:READROM:SERIALNUMBer command.

Description
  • This command sets or queries the serial number for Read ROM in ONEWIRE bus. MODe should be set to Standard.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:READROM:SERIALNUMBer? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:READROM:SERIALNUMBer? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:READROM:SERIALNUMBer value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:READROM:SERIALNUMBer <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:READROM:SERIALNUMBer?
Info
  • SEARCH<x> is the number of the search.
  • <QString> specifies the binary string used for Serial Number triggering. The default size and value of serial number for Read ROM is 48 bits and ‘XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX’.

SearchSearchItemTriggerABusOnewireSearchrom

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:SEARCHROM command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:SEARCHROM? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:SEARCHROM? query and raise an AssertionError if the returned value does not match value.
Info
  • SEARCH<x> is the number of the search.
Properties
  • .romcode: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:SEARCHROM:ROMCODe command.

romcode property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:SEARCHROM:ROMCODe command.

Description
  • This command sets or queries the ROM code for Search ROM in ONEWIRE bus. MODe should be set to Standard.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:SEARCHROM:ROMCODe? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:SEARCHROM:ROMCODe? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:SEARCHROM:ROMCODe value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:SEARCHROM:ROMCODe <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:SEARCHROM:ROMCODe?
Info
  • SEARCH<x> is the number of the search.
  • <QString> specifies the ROM code for Search ROM. The default size and value of ROM code for Search ROM is 64 bits and ‘XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX’.

SearchSearchItemTriggerABusOnewireSearchromRomcode

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:SEARCHROM:ROMCODe command.

Description
  • This command sets or queries the ROM code for Search ROM in ONEWIRE bus. MODe should be set to Standard.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:SEARCHROM:ROMCODe? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:SEARCHROM:ROMCODe? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:SEARCHROM:ROMCODe value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:SEARCHROM:ROMCODe <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:SEARCHROM:ROMCODe?
Info
  • SEARCH<x> is the number of the search.
  • <QString> specifies the ROM code for Search ROM. The default size and value of ROM code for Search ROM is 64 bits and ‘XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX’.

SearchSearchItemTriggerABusParallel

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:PARallel command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PARallel? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PARallel? query and raise an AssertionError if the returned value does not match value.
Properties
  • .data: The SEARCH:SEARCH<x>:TRIGger:A:BUS:PARallel:DATa command tree.

data property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:PARallel:DATa command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PARallel:DATa? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PARallel:DATa? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:PARallel:DATa:VALue command.

SearchSearchItemTriggerABusParallelData

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:PARallel:DATa command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PARallel:DATa? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PARallel:DATa? query and raise an AssertionError if the returned value does not match value.
Properties
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:PARallel:DATa:VALue command.

value property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:PARallel:DATa:VALue command.

Description
  • This command sets or queries the binary data string used for a parallel bus search to determine where to place a mark. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PARallel:DATa:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PARallel:DATa:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PARallel:DATa:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PARallel:DATa:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PARallel:DATa:VALue?
Info
  • <QString> specifies the data value in a valid format. Valid characters are 0-9.

SearchSearchItemTriggerABusParallelDataValue

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:PARallel:DATa:VALue command.

Description
  • This command sets or queries the binary data string used for a parallel bus search to determine where to place a mark. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PARallel:DATa:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PARallel:DATa:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PARallel:DATa:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PARallel:DATa:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PARallel:DATa:VALue?
Info
  • <QString> specifies the data value in a valid format. Valid characters are 0-9.

SearchSearchItemTriggerABusPcie

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE? query and raise an AssertionError if the returned value does not match value.
Properties
  • .cheader: The SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:CHEADer command.
  • .custom: The SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:CUSTom command tree.
  • .dllp: The SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:DLLP command tree.
  • .osettype: The SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:OSETtype command.
  • .sync: The SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:SYNC command.
  • .tlp: The SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:TLP command tree.

cheader property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:CHEADer command.

Description
  • This command sets or queries the Sync header type for Custom pattern to trigger on a PCIe Gen 3. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:CHEADer? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:CHEADer? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:CHEADer value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:CHEADer {CONTROL|DATA|EITHER}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:CHEADer?
Info
  • CONTROL specifies the search condition as control.
  • DATA specifies the search condition as data.
  • EITHER specifies the search condition as either.

custom property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:CUSTom command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:CUSTom? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:CUSTom? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .dheader: The SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:CUSTom:DHEAder command.
  • .nsymbols: The SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:CUSTom:NSYMbols command.

dllp property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:DLLP command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:DLLP? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:DLLP? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .dcredits: The SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:DLLP:DCRedits command tree.
  • .hcredits: The SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:DLLP:HCRedits command tree.
  • .vchannel: The SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:DLLP:VCHANnel command tree.

osettype property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:OSETtype command.

Description
  • This command sets or queries the ordered set trigger condition for a PCIe bus. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:OSETtype? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:OSETtype? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:OSETtype value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:OSETtype {TS<x>|EIOS|EIEOS|FTS|SDS|SKP}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:OSETtype?
Info
  • TS1 specifies the search condition as TS1.
  • TS2 specifies the search condition as TS2.
  • EIOS specifies the search condition as EIOS.
  • EIEOS specifies the search condition as EIEOS.
  • FTS specifies the search condition as FTS.
  • SDS specifies the search condition as SDS.
  • SKP specifies the search condition as SKP.

sync property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:SYNC command.

Description
  • This command sets or queries the Sync header type to trigger on a PCIe Gen 3. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:SYNC? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:SYNC? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:SYNC value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:SYNC {ORDSET|DATA|INVALID}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:SYNC?
Info
  • ORDSET specifies the search condition as ORDSET.
  • DATA specifies the search condition as DATA.
  • INVALID specifies the search condition as INVALID.

tlp property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:TLP command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:TLP? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:TLP? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .address: The SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:TLP:ADDRess command tree.
  • .ahigh: The SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:TLP:AHIGh command.
  • .alow: The SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:TLP:ALOW command.
  • .aotype: The SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:TLP:AOTYpe command.
  • .bnumber: The SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:TLP:BNUMber command.
  • .direction: The SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:TLP:DIRection command.
  • .mcode: The SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:TLP:MCODe command.
  • .prefix: The SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:TLP:PREFix command.
  • .ptype: The SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:TLP:PTYPe command.
  • .rid: The SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:TLP:RID command.
  • .snumber: The SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:TLP:SNUMber command.
  • .stag: The SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:TLP:STAG command.
  • .type: The SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:TLP:TYPe command.

SearchSearchItemTriggerABusPcieCheader

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:CHEADer command.

Description
  • This command sets or queries the Sync header type for Custom pattern to trigger on a PCIe Gen 3. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:CHEADer? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:CHEADer? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:CHEADer value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:CHEADer {CONTROL|DATA|EITHER}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:CHEADer?
Info
  • CONTROL specifies the search condition as control.
  • DATA specifies the search condition as data.
  • EITHER specifies the search condition as either.

SearchSearchItemTriggerABusPcieCustom

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:CUSTom command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:CUSTom? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:CUSTom? query and raise an AssertionError if the returned value does not match value.
Properties
  • .dheader: The SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:CUSTom:DHEAder command.
  • .nsymbols: The SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:CUSTom:NSYMbols command.

dheader property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:CUSTom:DHEAder command.

Description
  • This command sets or queries the data pattern to trigger on. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:CUSTom:DHEAder? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:CUSTom:DHEAder? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:CUSTom:DHEAder value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:CUSTom:DHEAder <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:CUSTom:DHEAder?
Info
  • <QString> specifies the binary block data string.

nsymbols property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:CUSTom:NSYMbols command.

Description
  • This command sets or queries the number of symbols in custom pattern to trigger on. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:CUSTom:NSYMbols? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:CUSTom:NSYMbols? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:CUSTom:NSYMbols value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:CUSTom:NSYMbols <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:CUSTom:NSYMbols?
Info
  • <NR1> specifies the data string in a valid format. The minimum and default values are 0. The maximum value is 16.

SearchSearchItemTriggerABusPcieCustomDheader

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:CUSTom:DHEAder command.

Description
  • This command sets or queries the data pattern to trigger on. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:CUSTom:DHEAder? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:CUSTom:DHEAder? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:CUSTom:DHEAder value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:CUSTom:DHEAder <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:CUSTom:DHEAder?
Info
  • <QString> specifies the binary block data string.

SearchSearchItemTriggerABusPcieCustomNsymbols

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:CUSTom:NSYMbols command.

Description
  • This command sets or queries the number of symbols in custom pattern to trigger on. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:CUSTom:NSYMbols? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:CUSTom:NSYMbols? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:CUSTom:NSYMbols value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:CUSTom:NSYMbols <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:CUSTom:NSYMbols?
Info
  • <NR1> specifies the data string in a valid format. The minimum and default values are 0. The maximum value is 16.

SearchSearchItemTriggerABusPcieDllp

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:DLLP command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:DLLP? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:DLLP? query and raise an AssertionError if the returned value does not match value.
Properties
  • .dcredits: The SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:DLLP:DCRedits command tree.
  • .hcredits: The SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:DLLP:HCRedits command tree.
  • .vchannel: The SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:DLLP:VCHANnel command tree.

dcredits property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:DLLP:DCRedits command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:DLLP:DCRedits? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:DLLP:DCRedits? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:DLLP:DCRedits:VALue command.

hcredits property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:DLLP:HCRedits command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:DLLP:HCRedits? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:DLLP:HCRedits? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:DLLP:HCRedits:VALue command.

vchannel property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:DLLP:VCHANnel command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:DLLP:VCHANnel? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:DLLP:VCHANnel? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:DLLP:VCHANnel:VALue command.

SearchSearchItemTriggerABusPcieDllpDcredits

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:DLLP:DCRedits command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:DLLP:DCRedits? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:DLLP:DCRedits? query and raise an AssertionError if the returned value does not match value.
Properties
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:DLLP:DCRedits:VALue command.

value property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:DLLP:DCRedits:VALue command.

Description
  • This command sets or queries the data value to be used for DLLP Flow control when triggering on a PCIe bus signal. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:DLLP:DCRedits:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:DLLP:DCRedits:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:DLLP:DCRedits:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:DLLP:DCRedits:VALue <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:DLLP:DCRedits:VALue?
Info
  • <NR1> specifies the data string in a valid format. The minimum and default values are 0. The maximum value is 4095.

SearchSearchItemTriggerABusPcieDllpDcreditsValue

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:DLLP:DCRedits:VALue command.

Description
  • This command sets or queries the data value to be used for DLLP Flow control when triggering on a PCIe bus signal. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:DLLP:DCRedits:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:DLLP:DCRedits:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:DLLP:DCRedits:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:DLLP:DCRedits:VALue <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:DLLP:DCRedits:VALue?
Info
  • <NR1> specifies the data string in a valid format. The minimum and default values are 0. The maximum value is 4095.

SearchSearchItemTriggerABusPcieDllpHcredits

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:DLLP:HCRedits command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:DLLP:HCRedits? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:DLLP:HCRedits? query and raise an AssertionError if the returned value does not match value.
Properties
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:DLLP:HCRedits:VALue command.

value property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:DLLP:HCRedits:VALue command.

Description
  • This command sets or queries the header credits to be used for DLLP Flow control when triggering on a PCIe bus signal. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:DLLP:HCRedits:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:DLLP:HCRedits:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:DLLP:HCRedits:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:DLLP:HCRedits:VALue <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:DLLP:HCRedits:VALue?
Info
  • <NR1> specifies the data string in a valid format. The minimum and default values are 0. The maximum value is 4095.

SearchSearchItemTriggerABusPcieDllpHcreditsValue

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:DLLP:HCRedits:VALue command.

Description
  • This command sets or queries the header credits to be used for DLLP Flow control when triggering on a PCIe bus signal. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:DLLP:HCRedits:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:DLLP:HCRedits:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:DLLP:HCRedits:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:DLLP:HCRedits:VALue <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:DLLP:HCRedits:VALue?
Info
  • <NR1> specifies the data string in a valid format. The minimum and default values are 0. The maximum value is 4095.

SearchSearchItemTriggerABusPcieDllpVchannel

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:DLLP:VCHANnel command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:DLLP:VCHANnel? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:DLLP:VCHANnel? query and raise an AssertionError if the returned value does not match value.
Properties
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:DLLP:VCHANnel:VALue command.

value property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:DLLP:VCHANnel:VALue command.

Description
  • This command sets or queries the data value to be used for DLLP Flow control when triggering on a PCIe bus signal. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:DLLP:VCHANnel:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:DLLP:VCHANnel:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:DLLP:VCHANnel:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:DLLP:VCHANnel:VALue <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:DLLP:VCHANnel:VALue?
Info
  • <NR1> specifies the data string in a valid format. The minimum and default values are 0. The maximum value is 4095.

SearchSearchItemTriggerABusPcieDllpVchannelValue

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:DLLP:VCHANnel:VALue command.

Description
  • This command sets or queries the data value to be used for DLLP Flow control when triggering on a PCIe bus signal. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:DLLP:VCHANnel:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:DLLP:VCHANnel:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:DLLP:VCHANnel:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:DLLP:VCHANnel:VALue <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:DLLP:VCHANnel:VALue?
Info
  • <NR1> specifies the data string in a valid format. The minimum and default values are 0. The maximum value is 4095.

SearchSearchItemTriggerABusPcieOsettype

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:OSETtype command.

Description
  • This command sets or queries the ordered set trigger condition for a PCIe bus. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:OSETtype? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:OSETtype? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:OSETtype value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:OSETtype {TS<x>|EIOS|EIEOS|FTS|SDS|SKP}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:OSETtype?
Info
  • TS1 specifies the search condition as TS1.
  • TS2 specifies the search condition as TS2.
  • EIOS specifies the search condition as EIOS.
  • EIEOS specifies the search condition as EIEOS.
  • FTS specifies the search condition as FTS.
  • SDS specifies the search condition as SDS.
  • SKP specifies the search condition as SKP.

SearchSearchItemTriggerABusPcieSync

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:SYNC command.

Description
  • This command sets or queries the Sync header type to trigger on a PCIe Gen 3. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:SYNC? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:SYNC? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:SYNC value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:SYNC {ORDSET|DATA|INVALID}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:SYNC?
Info
  • ORDSET specifies the search condition as ORDSET.
  • DATA specifies the search condition as DATA.
  • INVALID specifies the search condition as INVALID.

SearchSearchItemTriggerABusPcieTlp

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:TLP command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:TLP? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:TLP? query and raise an AssertionError if the returned value does not match value.
Properties
  • .address: The SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:TLP:ADDRess command tree.
  • .ahigh: The SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:TLP:AHIGh command.
  • .alow: The SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:TLP:ALOW command.
  • .aotype: The SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:TLP:AOTYpe command.
  • .bnumber: The SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:TLP:BNUMber command.
  • .direction: The SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:TLP:DIRection command.
  • .mcode: The SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:TLP:MCODe command.
  • .prefix: The SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:TLP:PREFix command.
  • .ptype: The SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:TLP:PTYPe command.
  • .rid: The SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:TLP:RID command.
  • .snumber: The SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:TLP:SNUMber command.
  • .stag: The SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:TLP:STAG command.
  • .type: The SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:TLP:TYPe command.

address property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:TLP:ADDRess command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:TLP:ADDRess? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:TLP:ADDRess? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .mode: The SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:TLP:ADDRess:MODe command.

ahigh property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:TLP:AHIGh command.

Description
  • This command sets the binary data value to be used for Address High of TLP when triggering on a PCIe bus signal. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:TLP:AHIGh? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:TLP:AHIGh? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:TLP:AHIGh value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:TLP:AHIGh <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:TLP:AHIGh?
Info
  • <QString> specifies the binary block data string.

alow property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:TLP:ALOW command.

Description
  • This command sets the binary data value to be used for Address Low of TLP when triggering on a PCIe bus signal. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:TLP:ALOW? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:TLP:ALOW? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:TLP:ALOW value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:TLP:ALOW <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:TLP:ALOW?
Info
  • <QString> specifies the binary block data string.

aotype property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:TLP:AOTYpe command.

Description
  • This command sets or queries the trigger condition for type of Atomic Operation of TLP in PCIe bus. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:TLP:AOTYpe? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:TLP:AOTYpe? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:TLP:AOTYpe value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:TLP:AOTYpe {ANY|FADD|SWAP|CAS}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:TLP:AOTYpe?
Info
  • ANY specifies the search condition as ANY.
  • FADD specifies the search condition as FADD.
  • SWAP specifies the search condition as SWAP.
  • CAS specifies the search condition as CAS.

bnumber property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:TLP:BNUMber command.

Description
  • This command sets the binary data value to be used for Bus Number of TLP when triggering on a PCIe bus signal. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:TLP:BNUMber? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:TLP:BNUMber? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:TLP:BNUMber value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:TLP:BNUMber <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:TLP:BNUMber?
Info
  • <QString> specifies the binary block data string.

direction property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:TLP:DIRection command.

Description
  • This command sets or queries the trigger condition for direction of TLP in PCIe bus signal. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:TLP:DIRection? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:TLP:DIRection? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:TLP:DIRection value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:TLP:DIRection {EITHER|READ|WRITE}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:TLP:DIRection?
Info
  • EITHER specifies the search condition as EITHER.
  • READ specifies the search condition as READ.
  • WRITE specifies the search condition as WRITE.

mcode property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:TLP:MCODe command.

Description
  • This command sets the binary data value to be used for Message Code of TLP when triggering on a PCIe bus signal. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:TLP:MCODe? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:TLP:MCODe? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:TLP:MCODe value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:TLP:MCODe <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:TLP:MCODe?
Info
  • <QString> specifies the binary block data string.

prefix property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:TLP:PREFix command.

Description
  • This command sets the binary data value to be used for Prefix of TLP when triggering on a PCIe bus signal. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:TLP:PREFix? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:TLP:PREFix? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:TLP:PREFix value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:TLP:PREFix <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:TLP:PREFix?
Info
  • <QString> specifies the binary block data string.

ptype property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:TLP:PTYPe command.

Description
  • This command sets or queries the trigger condition for Prefix Type of TLP in PCIe bus. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:TLP:PTYPe? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:TLP:PTYPe? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:TLP:PTYPe value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:TLP:PTYPe {ANY|LOCAL|ENEND}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:TLP:PTYPe?
Info
  • ANY specifies the search condition as ANY.
  • LOCAL specifies the search condition as LOCAL.
  • ENEND specifies the search condition as ENEND.

rid property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:TLP:RID command.

Description
  • This command sets the binary data value to be used for Requester ID of TLP when triggering on a PCIe bus signal. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:TLP:RID? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:TLP:RID? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:TLP:RID value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:TLP:RID <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:TLP:RID?
Info
  • <QString> specifies the binary block data string.

snumber property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:TLP:SNUMber command.

Description
  • This command sets the binary data value to be used for Sequence number of TLP when triggering on a PCIe bus signal. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:TLP:SNUMber? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:TLP:SNUMber? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:TLP:SNUMber value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:TLP:SNUMber <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:TLP:SNUMber?
Info
  • <QString> specifies the binary block data string.

stag property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:TLP:STAG command.

Description
  • This command sets the binary data value to be used for Steering tag of TLP when triggering on a PCIe bus signal. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:TLP:STAG? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:TLP:STAG? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:TLP:STAG value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:TLP:STAG <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:TLP:STAG?
Info
  • <QString> specifies the binary block data string.

type property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:TLP:TYPe command.

Description
  • This command sets or queries the trigger condition for a PCIe bus on specific TLP symbol. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:TLP:TYPe? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:TLP:TYPe? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:TLP:TYPe value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:TLP:TYPe {ANY|MEMORY|IO|CONFIG|MESSAGE|COMPLETION|AOPERATION|PREFIX}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:TLP:TYPe?
Info
  • ANY specifies the search condition as ANY.
  • MEMORY specifies the search condition as MEMORY.
  • IO specifies the search condition as IO.
  • CONFIG specifies the search condition as CONFIG.
  • MESSAGE specifies the search condition as MESSAGE.
  • COMPLETION specifies the search condition as COMPLETION.
  • AOPERATION specifies the search condition as AOPERATION.
  • PREFIX specifies the search condition as PREFIX.

SearchSearchItemTriggerABusPcieTlpAddress

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:TLP:ADDRess command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:TLP:ADDRess? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:TLP:ADDRess? query and raise an AssertionError if the returned value does not match value.
Properties
  • .mode: The SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:TLP:ADDRess:MODe command.

mode property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:TLP:ADDRess:MODe command.

Description
  • The command sets or queries the trigger condition for Address Mode of TLP in PCIe Gen 3. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:TLP:ADDRess:MODe? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:TLP:ADDRess:MODe? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:TLP:ADDRess:MODe value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:TLP:ADDRess:MODe {ADDR32|ADDR64}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:TLP:ADDRess:MODe?
Info
  • ADDR32 specifies the search condition as ADDR32.
  • ADDR64 specifies the search condition as ADDR64.

SearchSearchItemTriggerABusPcieTlpAddressMode

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:TLP:ADDRess:MODe command.

Description
  • The command sets or queries the trigger condition for Address Mode of TLP in PCIe Gen 3. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:TLP:ADDRess:MODe? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:TLP:ADDRess:MODe? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:TLP:ADDRess:MODe value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:TLP:ADDRess:MODe {ADDR32|ADDR64}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:TLP:ADDRess:MODe?
Info
  • ADDR32 specifies the search condition as ADDR32.
  • ADDR64 specifies the search condition as ADDR64.

SearchSearchItemTriggerABusPcieTlpAhigh

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:TLP:AHIGh command.

Description
  • This command sets the binary data value to be used for Address High of TLP when triggering on a PCIe bus signal. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:TLP:AHIGh? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:TLP:AHIGh? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:TLP:AHIGh value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:TLP:AHIGh <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:TLP:AHIGh?
Info
  • <QString> specifies the binary block data string.

SearchSearchItemTriggerABusPcieTlpAlow

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:TLP:ALOW command.

Description
  • This command sets the binary data value to be used for Address Low of TLP when triggering on a PCIe bus signal. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:TLP:ALOW? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:TLP:ALOW? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:TLP:ALOW value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:TLP:ALOW <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:TLP:ALOW?
Info
  • <QString> specifies the binary block data string.

SearchSearchItemTriggerABusPcieTlpAotype

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:TLP:AOTYpe command.

Description
  • This command sets or queries the trigger condition for type of Atomic Operation of TLP in PCIe bus. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:TLP:AOTYpe? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:TLP:AOTYpe? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:TLP:AOTYpe value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:TLP:AOTYpe {ANY|FADD|SWAP|CAS}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:TLP:AOTYpe?
Info
  • ANY specifies the search condition as ANY.
  • FADD specifies the search condition as FADD.
  • SWAP specifies the search condition as SWAP.
  • CAS specifies the search condition as CAS.

SearchSearchItemTriggerABusPcieTlpBnumber

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:TLP:BNUMber command.

Description
  • This command sets the binary data value to be used for Bus Number of TLP when triggering on a PCIe bus signal. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:TLP:BNUMber? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:TLP:BNUMber? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:TLP:BNUMber value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:TLP:BNUMber <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:TLP:BNUMber?
Info
  • <QString> specifies the binary block data string.

SearchSearchItemTriggerABusPcieTlpDirection

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:TLP:DIRection command.

Description
  • This command sets or queries the trigger condition for direction of TLP in PCIe bus signal. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:TLP:DIRection? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:TLP:DIRection? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:TLP:DIRection value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:TLP:DIRection {EITHER|READ|WRITE}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:TLP:DIRection?
Info
  • EITHER specifies the search condition as EITHER.
  • READ specifies the search condition as READ.
  • WRITE specifies the search condition as WRITE.

SearchSearchItemTriggerABusPcieTlpMcode

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:TLP:MCODe command.

Description
  • This command sets the binary data value to be used for Message Code of TLP when triggering on a PCIe bus signal. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:TLP:MCODe? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:TLP:MCODe? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:TLP:MCODe value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:TLP:MCODe <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:TLP:MCODe?
Info
  • <QString> specifies the binary block data string.

SearchSearchItemTriggerABusPcieTlpPrefix

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:TLP:PREFix command.

Description
  • This command sets the binary data value to be used for Prefix of TLP when triggering on a PCIe bus signal. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:TLP:PREFix? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:TLP:PREFix? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:TLP:PREFix value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:TLP:PREFix <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:TLP:PREFix?
Info
  • <QString> specifies the binary block data string.

SearchSearchItemTriggerABusPcieTlpPtype

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:TLP:PTYPe command.

Description
  • This command sets or queries the trigger condition for Prefix Type of TLP in PCIe bus. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:TLP:PTYPe? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:TLP:PTYPe? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:TLP:PTYPe value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:TLP:PTYPe {ANY|LOCAL|ENEND}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:TLP:PTYPe?
Info
  • ANY specifies the search condition as ANY.
  • LOCAL specifies the search condition as LOCAL.
  • ENEND specifies the search condition as ENEND.

SearchSearchItemTriggerABusPcieTlpRid

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:TLP:RID command.

Description
  • This command sets the binary data value to be used for Requester ID of TLP when triggering on a PCIe bus signal. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:TLP:RID? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:TLP:RID? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:TLP:RID value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:TLP:RID <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:TLP:RID?
Info
  • <QString> specifies the binary block data string.

SearchSearchItemTriggerABusPcieTlpSnumber

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:TLP:SNUMber command.

Description
  • This command sets the binary data value to be used for Sequence number of TLP when triggering on a PCIe bus signal. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:TLP:SNUMber? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:TLP:SNUMber? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:TLP:SNUMber value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:TLP:SNUMber <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:TLP:SNUMber?
Info
  • <QString> specifies the binary block data string.

SearchSearchItemTriggerABusPcieTlpStag

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:TLP:STAG command.

Description
  • This command sets the binary data value to be used for Steering tag of TLP when triggering on a PCIe bus signal. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:TLP:STAG? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:TLP:STAG? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:TLP:STAG value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:TLP:STAG <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:TLP:STAG?
Info
  • <QString> specifies the binary block data string.

SearchSearchItemTriggerABusPcieTlpType

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:TLP:TYPe command.

Description
  • This command sets or queries the trigger condition for a PCIe bus on specific TLP symbol. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:TLP:TYPe? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:TLP:TYPe? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:TLP:TYPe value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:TLP:TYPe {ANY|MEMORY|IO|CONFIG|MESSAGE|COMPLETION|AOPERATION|PREFIX}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:TLP:TYPe?
Info
  • ANY specifies the search condition as ANY.
  • MEMORY specifies the search condition as MEMORY.
  • IO specifies the search condition as IO.
  • CONFIG specifies the search condition as CONFIG.
  • MESSAGE specifies the search condition as MESSAGE.
  • COMPLETION specifies the search condition as COMPLETION.
  • AOPERATION specifies the search condition as AOPERATION.
  • PREFIX specifies the search condition as PREFIX.

SearchSearchItemTriggerABusPsifive

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe? query and raise an AssertionError if the returned value does not match value.
Properties
  • .blockdata: The SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:BLOCKDATa command tree.
  • .condition: The SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:CONDition command.
  • .databits: The SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:DATABITs command.
  • .data: The SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:DATa command tree.
  • .errortype: The SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:ERRORTYPe command.
  • .functioncodetype: The SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:FUNCTIONCODETYPe command.
  • .registeraddress: The SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:REGISTERADDRess command.
  • .register: The SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:REGister command tree.
  • .sensorstatus: The SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:SENSORSTATus command tree.
  • .sensor: The SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:SENSor command tree.
  • .status: The SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:STATus command tree.

blockdata property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:BLOCKDATa command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:BLOCKDATa? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:BLOCKDATa? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:BLOCKDATa:VALue command.

condition property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:CONDition command.

Description
  • This command sets or queries the trigger condition for an PSI5 bus. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:CONDition? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:CONDition? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:CONDition value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:CONDition {STARt|STATus|DATa|BLOCkid|ERRors|STARTBIT|FUNCTIONCODe|ECUDATa|SENSORADDRess|REGISTERADDRess|SENSORSTATus|CRCERRor}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:CONDition?
Info
  • STARt specifies the search condition as Start. This is the default trigger.
  • STATus specifies the search condition as Status.
  • DATa specifies the search condition as Data.
  • BLOCkid specifies the search condition as Block ID.
  • ERRors specifies the search condition as Errors.
  • STARTBIT specifies the search condition as Start Bit.
  • FUNCTIONCODe specifies the search condition as Function Code.
  • ECUDATa specifies the search condition as ECU Data.
  • SENSORADDRess specifies the search condition as Sensor Address.
  • REGISTERADDRess specifies the search condition as Register Address.
  • SENSORSTATus specifies the search condition as Sensor Status.
  • CRCERRor specifies the search condition as CRC Error.

data property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:DATa command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:DATa? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:DATa? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .ecu: The SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:DATa:ECU command tree.
  • .region: The SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:DATa:REGion command tree.

databits property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:DATABITs command.

Description
  • This command sets or queries the binary register address string used for PSI5 triggering if the trigger condition is Data in ECU to Sensor communication mode. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:DATABITs? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:DATABITs? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:DATABITs value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:DATABITs {FOURBIT|EIGHTBIT|TWENTYBIT}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:DATABITs?
Info
  • FOURBIT specifies the data bit value as 4 bit.
  • EIGHTBIT specifies the data bit value as 8 bit.
  • TWENTYBIT specifies the data bit value as 20 bit.

errortype property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:ERRORTYPe command.

Description
  • This command sets or queries the error type for an PSI5 bus. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:ERRORTYPe? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:ERRORTYPe? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:ERRORTYPe value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:ERRORTYPe {ANY|PARity|CRC|RESPONSECODe}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:ERRORTYPe?
Info
  • ANY specifies the error type value as any. This is the default value.
  • PARity specifies the error type value as parity.
  • CRC specifies the error type value as CRC.
  • RESPONSECODe specifies the error type value as response code.

functioncodetype property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:FUNCTIONCODETYPe command.

Description
  • This command sets or queries the binary data string used for PSI5 triggering if the trigger condition is a Function Code. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:FUNCTIONCODETYPe? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:FUNCTIONCODETYPe? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:FUNCTIONCODETYPe value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:FUNCTIONCODETYPe <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:FUNCTIONCODETYPe?
Info
  • <QString> specifies the value of the data string. The valid characters are 0, 1, and X for values in binary format; and A-F, 0-9, and X for values in hexadecimal format.

register property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:REGister command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:REGister? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:REGister? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .address: The SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:REGister:ADDRess command tree.

registeraddress property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:REGISTERADDRess command.

Description
  • This command sets or queries the register address for PSI5 bus. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:REGISTERADDRess? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:REGISTERADDRess? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:REGISTERADDRess value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:REGISTERADDRess {TWOBIT|SIXBIT|EIGHTBIT}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:REGISTERADDRess?
Info
  • TWOBIT specifies the register address value as 2 bit. This is the default value.
  • SIXBIT specifies the register address value as 6 bit.
  • EIGHTBIT specifies the register address value as 8 bit.

sensor property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:SENSor command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:SENSor? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:SENSor? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .address: The SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:SENSor:ADDRess command tree.

sensorstatus property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:SENSORSTATus command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:SENSORSTATus? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:SENSORSTATus? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .type: The SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:SENSORSTATus:TYPe command.

status property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:STATus command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:STATus? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:STATus? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:STATus:VALue command.

SearchSearchItemTriggerABusPsifiveBlockdata

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:BLOCKDATa command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:BLOCKDATa? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:BLOCKDATa? query and raise an AssertionError if the returned value does not match value.
Properties
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:BLOCKDATa:VALue command.

value property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:BLOCKDATa:VALue command.

Description
  • This command sets or queries the binary block data string used for PSI5 triggering if the trigger condition is block id.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:BLOCKDATa:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:BLOCKDATa:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:BLOCKDATa:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:BLOCKDATa:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:BLOCKDATa:VALue?
Info
  • <QString> specifies the binary block data string.

SearchSearchItemTriggerABusPsifiveBlockdataValue

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:BLOCKDATa:VALue command.

Description
  • This command sets or queries the binary block data string used for PSI5 triggering if the trigger condition is block id.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:BLOCKDATa:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:BLOCKDATa:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:BLOCKDATa:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:BLOCKDATa:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:BLOCKDATa:VALue?
Info
  • <QString> specifies the binary block data string.

SearchSearchItemTriggerABusPsifiveCondition

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:CONDition command.

Description
  • This command sets or queries the trigger condition for an PSI5 bus. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:CONDition? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:CONDition? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:CONDition value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:CONDition {STARt|STATus|DATa|BLOCkid|ERRors|STARTBIT|FUNCTIONCODe|ECUDATa|SENSORADDRess|REGISTERADDRess|SENSORSTATus|CRCERRor}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:CONDition?
Info
  • STARt specifies the search condition as Start. This is the default trigger.
  • STATus specifies the search condition as Status.
  • DATa specifies the search condition as Data.
  • BLOCkid specifies the search condition as Block ID.
  • ERRors specifies the search condition as Errors.
  • STARTBIT specifies the search condition as Start Bit.
  • FUNCTIONCODe specifies the search condition as Function Code.
  • ECUDATa specifies the search condition as ECU Data.
  • SENSORADDRess specifies the search condition as Sensor Address.
  • REGISTERADDRess specifies the search condition as Register Address.
  • SENSORSTATus specifies the search condition as Sensor Status.
  • CRCERRor specifies the search condition as CRC Error.

SearchSearchItemTriggerABusPsifiveData

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:DATa command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:DATa? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:DATa? query and raise an AssertionError if the returned value does not match value.
Properties
  • .ecu: The SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:DATa:ECU command tree.
  • .region: The SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:DATa:REGion command tree.

ecu property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:DATa:ECU command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:DATa:ECU? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:DATa:ECU? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .sensor: The SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:DATa:ECU:SENSor command tree.

region property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:DATa:REGion command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:DATa:REGion? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:DATa:REGion? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .a: The SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:DATa:REGion:A command tree.
  • .b: The SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:DATa:REGion:B command tree.

SearchSearchItemTriggerABusPsifiveDataEcu

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:DATa:ECU command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:DATa:ECU? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:DATa:ECU? query and raise an AssertionError if the returned value does not match value.
Properties
  • .sensor: The SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:DATa:ECU:SENSor command tree.

sensor property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:DATa:ECU:SENSor command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:DATa:ECU:SENSor? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:DATa:ECU:SENSor? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:DATa:ECU:SENSor:VALue command.

SearchSearchItemTriggerABusPsifiveDataEcuSensor

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:DATa:ECU:SENSor command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:DATa:ECU:SENSor? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:DATa:ECU:SENSor? query and raise an AssertionError if the returned value does not match value.
Properties
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:DATa:ECU:SENSor:VALue command.

value property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:DATa:ECU:SENSor:VALue command.

Description
  • This command sets or queries the binary Data string used for PSI5 triggering if the trigger condition is Data in ECU to Sensor communication mode. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:DATa:ECU:SENSor:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:DATa:ECU:SENSor:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:DATa:ECU:SENSor:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:DATa:ECU:SENSor:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:DATa:ECU:SENSor:VALue?
Info
  • <QString> specifies the value of the data string. The valid characters are 0, 1, and X for values in binary format; and A-F, 0-9, and X for values in hexadecimal format.

SearchSearchItemTriggerABusPsifiveDataEcuSensorValue

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:DATa:ECU:SENSor:VALue command.

Description
  • This command sets or queries the binary Data string used for PSI5 triggering if the trigger condition is Data in ECU to Sensor communication mode. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:DATa:ECU:SENSor:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:DATa:ECU:SENSor:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:DATa:ECU:SENSor:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:DATa:ECU:SENSor:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:DATa:ECU:SENSor:VALue?
Info
  • <QString> specifies the value of the data string. The valid characters are 0, 1, and X for values in binary format; and A-F, 0-9, and X for values in hexadecimal format.

SearchSearchItemTriggerABusPsifiveDataRegion

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:DATa:REGion command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:DATa:REGion? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:DATa:REGion? query and raise an AssertionError if the returned value does not match value.
Properties
  • .a: The SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:DATa:REGion:A command tree.
  • .b: The SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:DATa:REGion:B command tree.

a property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:DATa:REGion:A command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:DATa:REGion:A? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:DATa:REGion:A? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:DATa:REGion:A:VALue command.

b property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:DATa:REGion:B command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:DATa:REGion:B? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:DATa:REGion:B? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:DATa:REGion:B:VALue command.

SearchSearchItemTriggerABusPsifiveDataRegionA

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:DATa:REGion:A command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:DATa:REGion:A? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:DATa:REGion:A? query and raise an AssertionError if the returned value does not match value.
Properties
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:DATa:REGion:A:VALue command.

value property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:DATa:REGion:A:VALue command.

Description
  • This command sets or queries the binary data string used for PSI5 triggering if the trigger condition is data region A. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:DATa:REGion:A:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:DATa:REGion:A:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:DATa:REGion:A:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:DATa:REGion:A:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:DATa:REGion:A:VALue?
Info
  • <QString> specifies the value of the data string. The valid characters are 0, 1, and X for values in binary format; and A-F, 0-9, and X for values in hexadecimal format.

SearchSearchItemTriggerABusPsifiveDataRegionAValue

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:DATa:REGion:A:VALue command.

Description
  • This command sets or queries the binary data string used for PSI5 triggering if the trigger condition is data region A. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:DATa:REGion:A:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:DATa:REGion:A:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:DATa:REGion:A:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:DATa:REGion:A:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:DATa:REGion:A:VALue?
Info
  • <QString> specifies the value of the data string. The valid characters are 0, 1, and X for values in binary format; and A-F, 0-9, and X for values in hexadecimal format.

SearchSearchItemTriggerABusPsifiveDataRegionB

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:DATa:REGion:B command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:DATa:REGion:B? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:DATa:REGion:B? query and raise an AssertionError if the returned value does not match value.
Properties
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:DATa:REGion:B:VALue command.

value property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:DATa:REGion:B:VALue command.

Description
  • This command sets or queries the binary data string used for PSI5 triggering if the trigger condition is data region B. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:DATa:REGion:B:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:DATa:REGion:B:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:DATa:REGion:B:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:DATa:REGion:B:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:DATa:REGion:B:VALue?
Info
  • <QString> specifies the value of the data string. The valid characters are 0, 1, and X for values in binary format; and A-F, 0-9, and X for values in hexadecimal format.

SearchSearchItemTriggerABusPsifiveDataRegionBValue

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:DATa:REGion:B:VALue command.

Description
  • This command sets or queries the binary data string used for PSI5 triggering if the trigger condition is data region B. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:DATa:REGion:B:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:DATa:REGion:B:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:DATa:REGion:B:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:DATa:REGion:B:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:DATa:REGion:B:VALue?
Info
  • <QString> specifies the value of the data string. The valid characters are 0, 1, and X for values in binary format; and A-F, 0-9, and X for values in hexadecimal format.

SearchSearchItemTriggerABusPsifiveDatabits

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:DATABITs command.

Description
  • This command sets or queries the binary register address string used for PSI5 triggering if the trigger condition is Data in ECU to Sensor communication mode. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:DATABITs? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:DATABITs? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:DATABITs value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:DATABITs {FOURBIT|EIGHTBIT|TWENTYBIT}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:DATABITs?
Info
  • FOURBIT specifies the data bit value as 4 bit.
  • EIGHTBIT specifies the data bit value as 8 bit.
  • TWENTYBIT specifies the data bit value as 20 bit.

SearchSearchItemTriggerABusPsifiveErrortype

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:ERRORTYPe command.

Description
  • This command sets or queries the error type for an PSI5 bus. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:ERRORTYPe? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:ERRORTYPe? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:ERRORTYPe value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:ERRORTYPe {ANY|PARity|CRC|RESPONSECODe}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:ERRORTYPe?
Info
  • ANY specifies the error type value as any. This is the default value.
  • PARity specifies the error type value as parity.
  • CRC specifies the error type value as CRC.
  • RESPONSECODe specifies the error type value as response code.

SearchSearchItemTriggerABusPsifiveFunctioncodetype

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:FUNCTIONCODETYPe command.

Description
  • This command sets or queries the binary data string used for PSI5 triggering if the trigger condition is a Function Code. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:FUNCTIONCODETYPe? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:FUNCTIONCODETYPe? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:FUNCTIONCODETYPe value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:FUNCTIONCODETYPe <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:FUNCTIONCODETYPe?
Info
  • <QString> specifies the value of the data string. The valid characters are 0, 1, and X for values in binary format; and A-F, 0-9, and X for values in hexadecimal format.

SearchSearchItemTriggerABusPsifiveRegister

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:REGister command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:REGister? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:REGister? query and raise an AssertionError if the returned value does not match value.
Properties
  • .address: The SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:REGister:ADDRess command tree.

address property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:REGister:ADDRess command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:REGister:ADDRess? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:REGister:ADDRess? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:REGister:ADDRess:VALue command.

SearchSearchItemTriggerABusPsifiveRegisterAddress

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:REGister:ADDRess command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:REGister:ADDRess? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:REGister:ADDRess? query and raise an AssertionError if the returned value does not match value.
Properties
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:REGister:ADDRess:VALue command.

value property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:REGister:ADDRess:VALue command.

Description
  • This command sets or queries the binary register address string used for PSI5 triggering if the trigger condition is Register Address. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:REGister:ADDRess:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:REGister:ADDRess:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:REGister:ADDRess:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:REGister:ADDRess:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:REGister:ADDRess:VALue?
Info
  • <QString> specifies the value of the data string. The valid characters are 0, 1, and X for values in binary format; and A-F, 0-9, and X for values in hexadecimal format.

SearchSearchItemTriggerABusPsifiveRegisterAddressValue

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:REGister:ADDRess:VALue command.

Description
  • This command sets or queries the binary register address string used for PSI5 triggering if the trigger condition is Register Address. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:REGister:ADDRess:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:REGister:ADDRess:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:REGister:ADDRess:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:REGister:ADDRess:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:REGister:ADDRess:VALue?
Info
  • <QString> specifies the value of the data string. The valid characters are 0, 1, and X for values in binary format; and A-F, 0-9, and X for values in hexadecimal format.

SearchSearchItemTriggerABusPsifiveRegisteraddress

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:REGISTERADDRess command.

Description
  • This command sets or queries the register address for PSI5 bus. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:REGISTERADDRess? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:REGISTERADDRess? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:REGISTERADDRess value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:REGISTERADDRess {TWOBIT|SIXBIT|EIGHTBIT}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:REGISTERADDRess?
Info
  • TWOBIT specifies the register address value as 2 bit. This is the default value.
  • SIXBIT specifies the register address value as 6 bit.
  • EIGHTBIT specifies the register address value as 8 bit.

SearchSearchItemTriggerABusPsifiveSensor

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:SENSor command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:SENSor? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:SENSor? query and raise an AssertionError if the returned value does not match value.
Properties
  • .address: The SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:SENSor:ADDRess command tree.

address property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:SENSor:ADDRess command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:SENSor:ADDRess? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:SENSor:ADDRess? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:SENSor:ADDRess:VALue command.

SearchSearchItemTriggerABusPsifiveSensorAddress

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:SENSor:ADDRess command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:SENSor:ADDRess? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:SENSor:ADDRess? query and raise an AssertionError if the returned value does not match value.
Properties
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:SENSor:ADDRess:VALue command.

value property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:SENSor:ADDRess:VALue command.

Description
  • This command sets or queries the binary sensor address string used for PSI5 triggering if the trigger condition is Sensor Address. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:SENSor:ADDRess:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:SENSor:ADDRess:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:SENSor:ADDRess:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:SENSor:ADDRess:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:SENSor:ADDRess:VALue?
Info
  • <QString> specifies the value of the data string. The valid characters are 0, 1,and X for values in binary format; and A-F, 0-9, and X for values in hexadecimal format.

SearchSearchItemTriggerABusPsifiveSensorAddressValue

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:SENSor:ADDRess:VALue command.

Description
  • This command sets or queries the binary sensor address string used for PSI5 triggering if the trigger condition is Sensor Address. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:SENSor:ADDRess:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:SENSor:ADDRess:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:SENSor:ADDRess:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:SENSor:ADDRess:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:SENSor:ADDRess:VALue?
Info
  • <QString> specifies the value of the data string. The valid characters are 0, 1,and X for values in binary format; and A-F, 0-9, and X for values in hexadecimal format.

SearchSearchItemTriggerABusPsifiveSensorstatus

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:SENSORSTATus command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:SENSORSTATus? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:SENSORSTATus? query and raise an AssertionError if the returned value does not match value.
Properties
  • .type: The SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:SENSORSTATus:TYPe command.

type property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:SENSORSTATus:TYPe command.

Description
  • This command sets or queries the sensor status for PSI5 bus.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:SENSORSTATus:TYPe? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:SENSORSTATus:TYPe? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:SENSORSTATus:TYPe value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:SENSORSTATus:TYPe {READy|BUSY|DEFect|SERVICEMODe|UNLocked}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:SENSORSTATus:TYPe?
Info
  • READy specifies the sensor status as ready. This is the default value.
  • BUSY specifies the sensor status as busy.
  • DEFect specifies the sensor status as defect.
  • SERVICEMODe specifies the sensor status as service mode.
  • UNLocked specifies the sensor status as unlocked.

SearchSearchItemTriggerABusPsifiveSensorstatusType

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:SENSORSTATus:TYPe command.

Description
  • This command sets or queries the sensor status for PSI5 bus.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:SENSORSTATus:TYPe? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:SENSORSTATus:TYPe? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:SENSORSTATus:TYPe value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:SENSORSTATus:TYPe {READy|BUSY|DEFect|SERVICEMODe|UNLocked}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:SENSORSTATus:TYPe?
Info
  • READy specifies the sensor status as ready. This is the default value.
  • BUSY specifies the sensor status as busy.
  • DEFect specifies the sensor status as defect.
  • SERVICEMODe specifies the sensor status as service mode.
  • UNLocked specifies the sensor status as unlocked.

SearchSearchItemTriggerABusPsifiveStatus

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:STATus command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:STATus? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:STATus? query and raise an AssertionError if the returned value does not match value.
Properties
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:STATus:VALue command.

value property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:STATus:VALue command.

Description
  • This command sets or queries the binary status string used for PSI5 triggering if the trigger condition is status.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:STATus:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:STATus:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:STATus:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:STATus:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:STATus:VALue?
Info
  • <QString> specifies the value of the data string. The valid characters are 0, 1, and X for values in binary format; and A-F, 0-9, and X for values in hexadecimal format.

SearchSearchItemTriggerABusPsifiveStatusValue

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:STATus:VALue command.

Description
  • This command sets or queries the binary status string used for PSI5 triggering if the trigger condition is status.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:STATus:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:STATus:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:STATus:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:STATus:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PSIFIVe:STATus:VALue?
Info
  • <QString> specifies the value of the data string. The valid characters are 0, 1, and X for values in binary format; and A-F, 0-9, and X for values in hexadecimal format.

SearchSearchItemTriggerABusRs232c

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:RS232C command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:RS232C? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:RS232C? query and raise an AssertionError if the returned value does not match value.
Properties
  • .condition: The SEARCH:SEARCH<x>:TRIGger:A:BUS:RS232C:CONDition command.
  • .data: The SEARCH:SEARCH<x>:TRIGger:A:BUS:RS232C:DATa command tree.

condition property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:RS232C:CONDition command.

Description
  • This command sets or queries the condition for an RS232C bus search to determine where to place a mark. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:RS232C:CONDition? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:RS232C:CONDition? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:RS232C:CONDition value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:RS232C:CONDition {DATa|EOp|PARItyerror|STARt}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:RS232C:CONDition?
Info
  • DATa specifies the search condition as Data.
  • EOp specifies the search condition as End of Packet.
  • PARItyerror specifies the search condition as Parity Error.
  • STARt specifies the search condition as Start.

data property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:RS232C:DATa command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:RS232C:DATa? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:RS232C:DATa? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .size: The SEARCH:SEARCH<x>:TRIGger:A:BUS:RS232C:DATa:SIZe command.
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:RS232C:DATa:VALue command.

SearchSearchItemTriggerABusRs232cCondition

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:RS232C:CONDition command.

Description
  • This command sets or queries the condition for an RS232C bus search to determine where to place a mark. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:RS232C:CONDition? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:RS232C:CONDition? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:RS232C:CONDition value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:RS232C:CONDition {DATa|EOp|PARItyerror|STARt}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:RS232C:CONDition?
Info
  • DATa specifies the search condition as Data.
  • EOp specifies the search condition as End of Packet.
  • PARItyerror specifies the search condition as Parity Error.
  • STARt specifies the search condition as Start.

SearchSearchItemTriggerABusRs232cData

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:RS232C:DATa command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:RS232C:DATa? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:RS232C:DATa? query and raise an AssertionError if the returned value does not match value.
Properties
  • .size: The SEARCH:SEARCH<x>:TRIGger:A:BUS:RS232C:DATa:SIZe command.
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:RS232C:DATa:VALue command.

size property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:RS232C:DATa:SIZe command.

Description
  • This command sets or queries the length of the data string in bytes to be used for an RS232 bus search to determine where to place a mark when the search condition is Data. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:RS232C:DATa:SIZe? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:RS232C:DATa:SIZe? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:RS232C:DATa:SIZe value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:RS232C:DATa:SIZe <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:RS232C:DATa:SIZe?
Info
  • <NR3> is the number of bits per word in the data string, from 1 to 8.

value property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:RS232C:DATa:VALue command.

Description
  • This command sets or queries the data string used for the specified RS232C bus trigger search to determine where to place a mark. The search condition must be Data. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:RS232C:DATa:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:RS232C:DATa:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:RS232C:DATa:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:RS232C:DATa:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:RS232C:DATa:VALue?
Info
  • <QString> specifies the value of the data string. The valid characters are 0, 1, and X for values in binary format; and A-F, 0-9, and X for values in hexadecimal format.

SearchSearchItemTriggerABusRs232cDataSize

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:RS232C:DATa:SIZe command.

Description
  • This command sets or queries the length of the data string in bytes to be used for an RS232 bus search to determine where to place a mark when the search condition is Data. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:RS232C:DATa:SIZe? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:RS232C:DATa:SIZe? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:RS232C:DATa:SIZe value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:RS232C:DATa:SIZe <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:RS232C:DATa:SIZe?
Info
  • <NR3> is the number of bits per word in the data string, from 1 to 8.

SearchSearchItemTriggerABusRs232cDataValue

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:RS232C:DATa:VALue command.

Description
  • This command sets or queries the data string used for the specified RS232C bus trigger search to determine where to place a mark. The search condition must be Data. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:RS232C:DATa:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:RS232C:DATa:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:RS232C:DATa:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:RS232C:DATa:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:RS232C:DATa:VALue?
Info
  • <QString> specifies the value of the data string. The valid characters are 0, 1, and X for values in binary format; and A-F, 0-9, and X for values in hexadecimal format.

SearchSearchItemTriggerABusS8b10b

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B? query and raise an AssertionError if the returned value does not match value.
Info
  • SEARCH<x> is the number of the search.
Properties
  • .condition: The SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:CONDition command.
  • .disparity: The SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:DISParity command.
  • .error: The SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:ERRor command.
  • .symbol: The SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:SYMbol command tree.

condition property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:CONDition command.

Description
  • This command sets or queries the type of data search for an 8B10B bus. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:CONDition? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:CONDition? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:CONDition value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:CONDition {SYMbols|ERRors}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:CONDition?
Info
  • SEARCH<x> is the number of the search.
  • SYMbols specifies the search condition as data or control.
  • ERRors specifies the search condition as Symbol error or disparity error.

disparity property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:DISParity command.

Description
  • This command sets or queries the disparity to be used when searching on a 8B10b signal. The search condition must be set to Symbols > 8-bit.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:DISParity? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:DISParity? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:DISParity value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:DISParity {POSITIVe|NEGAtive|EITHer}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:DISParity?
Info
  • SEARCH<x> is the Search identifier number.
  • POSITIVe specifies searching for positive disparity.
  • NEGAtive specifies searching for negative disparity.
  • EITHer specifies searching for neutral or either positive/negative disparity.

error property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:ERRor command.

Description
  • This command sets or queries the error type to be used when searching on a 8B10b signal. The search condition must be set to Errors.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:ERRor? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:ERRor? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:ERRor value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:ERRor {SYMBol|DISParity}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:ERRor?
Info
  • SEARCH<x> is the Search identifier number.
  • SYMBol specifies searching for Symbol Errors.
  • DISParity specifies searching for Disparity Errors.

symbol property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:SYMbol command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:SYMbol? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:SYMbol? query and raise an AssertionError if the returned value does not match value.
Info
  • SEARCH<x> is the Search identifier number.
Sub-properties
  • .csymvalue: The SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:SYMbol:CSYMVALue command.
  • .ebitvalue: The SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:SYMbol:EBITVALue command.
  • .mode: The SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:SYMbol:MODe command.
  • .tbitrdneg: The SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:SYMbol:TBITRDNeg command.
  • .tbitrdpos: The SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:SYMbol:TBITRDPos command.
  • .tbitvalue: The SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:SYMbol:TBITVALue command.
  • .type: The SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:SYMbol:TYPe command.

SearchSearchItemTriggerABusS8b10bCondition

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:CONDition command.

Description
  • This command sets or queries the type of data search for an 8B10B bus. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:CONDition? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:CONDition? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:CONDition value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:CONDition {SYMbols|ERRors}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:CONDition?
Info
  • SEARCH<x> is the number of the search.
  • SYMbols specifies the search condition as data or control.
  • ERRors specifies the search condition as Symbol error or disparity error.

SearchSearchItemTriggerABusS8b10bDisparity

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:DISParity command.

Description
  • This command sets or queries the disparity to be used when searching on a 8B10b signal. The search condition must be set to Symbols > 8-bit.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:DISParity? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:DISParity? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:DISParity value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:DISParity {POSITIVe|NEGAtive|EITHer}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:DISParity?
Info
  • SEARCH<x> is the Search identifier number.
  • POSITIVe specifies searching for positive disparity.
  • NEGAtive specifies searching for negative disparity.
  • EITHer specifies searching for neutral or either positive/negative disparity.

SearchSearchItemTriggerABusS8b10bError

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:ERRor command.

Description
  • This command sets or queries the error type to be used when searching on a 8B10b signal. The search condition must be set to Errors.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:ERRor? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:ERRor? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:ERRor value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:ERRor {SYMBol|DISParity}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:ERRor?
Info
  • SEARCH<x> is the Search identifier number.
  • SYMBol specifies searching for Symbol Errors.
  • DISParity specifies searching for Disparity Errors.

SearchSearchItemTriggerABusS8b10bSymbol

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:SYMbol command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:SYMbol? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:SYMbol? query and raise an AssertionError if the returned value does not match value.
Info
  • SEARCH<x> is the Search identifier number.
Properties
  • .csymvalue: The SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:SYMbol:CSYMVALue command.
  • .ebitvalue: The SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:SYMbol:EBITVALue command.
  • .mode: The SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:SYMbol:MODe command.
  • .tbitrdneg: The SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:SYMbol:TBITRDNeg command.
  • .tbitrdpos: The SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:SYMbol:TBITRDPos command.
  • .tbitvalue: The SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:SYMbol:TBITVALue command.
  • .type: The SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:SYMbol:TYPe command.

csymvalue property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:SYMbol:CSYMVALue command.

Description
  • This command sets or queries the control symbol value to be used when searching on 8b10b signal. The default is all X’s (don’t care). The search condition needs to be set to Symbols. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:SYMbol:CSYMVALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:SYMbol:CSYMVALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:SYMbol:CSYMVALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:SYMbol:CSYMVALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:SYMbol:CSYMVALue?
Info
  • SEARCH<x> is the Search identifier number.
  • <QString> specifies the 10 bit value.

ebitvalue property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:SYMbol:EBITVALue command.

Description
  • This command specifies the 8 bit value to be used when searching on an 8b10b signal. The default is all X’s (don’t care). The search condition needs to be set to Symbols. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:SYMbol:EBITVALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:SYMbol:EBITVALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:SYMbol:EBITVALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:SYMbol:EBITVALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:SYMbol:EBITVALue?
Info
  • SEARCH<x> is the Search identifier number.
  • <QString> specifies the 8 bit value.

mode property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:SYMbol:MODe command.

Description
  • This command sets or queries the mode of data search to be used when searching on 8b10b signal. The search condition must be set to Symbols.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:SYMbol:MODe? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:SYMbol:MODe? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:SYMbol:MODe value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:SYMbol:MODe {EBIT|TBIT|SYMB}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:SYMbol:MODe?
Info
  • SEARCH<x> is the number of the search.
  • EBIT specifies searching for Eight Bit data.
  • TBIT specifies searching for Ten bit data (6 bits and 4 bits combined). Only valid values are considered.
  • SYMB specifies searching for symbol data with disparity. Takes only K and D with possible values.

tbitrdneg property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:SYMbol:TBITRDNeg command.

Description
  • This command specifies the 10 bit RD negative value to be used when searching on an 8b10b signal. The default is all X’s (don’t care). The search condition needs to be set to Symbols. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:SYMbol:TBITRDNeg? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:SYMbol:TBITRDNeg? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:SYMbol:TBITRDNeg value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:SYMbol:TBITRDNeg <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:SYMbol:TBITRDNeg?
Info
  • SEARCH<x> is the Search identifier number.
  • <QString> specifies the 10 bit RD negative value.

tbitrdpos property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:SYMbol:TBITRDPos command.

Description
  • This command specifies the 10 bit RD positive value to be used when searching on an 8b10b signal. The default is all X’s (don’t care). The search condition needs to be set to Symbols. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:SYMbol:TBITRDPos? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:SYMbol:TBITRDPos? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:SYMbol:TBITRDPos value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:SYMbol:TBITRDPos <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:SYMbol:TBITRDPos?
Info
  • SEARCH<x> is the Search identifier number.
  • <QString> specifies the 10 bit RD positive value.

tbitvalue property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:SYMbol:TBITVALue command.

Description
  • This command specifies the 10 bit value to be used when searching on an 8b10b signal. The default is all X’s (don’t care). The search condition needs to be set to Symbols. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:SYMbol:TBITVALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:SYMbol:TBITVALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:SYMbol:TBITVALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:SYMbol:TBITVALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:SYMbol:TBITVALue?
Info
  • SEARCH<x> is the Search identifier number.
  • <QString> specifies the 10 bit value.

type property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:SYMbol:TYPe command.

Description
  • This command sets or queries the type of symbol when searching on 8b10b signal. The search condition must be set to Symbols.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:SYMbol:TYPe? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:SYMbol:TYPe? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:SYMbol:TYPe value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:SYMbol:TYPe {DATa|CONTrol}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:SYMbol:TYPe?
Info
  • SEARCH<x> is the number of the search.
  • DATa specifies searching for Data Symbols.
  • CONTrol specifies searching for Control Symbols.

SearchSearchItemTriggerABusS8b10bSymbolCsymvalue

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:SYMbol:CSYMVALue command.

Description
  • This command sets or queries the control symbol value to be used when searching on 8b10b signal. The default is all X’s (don’t care). The search condition needs to be set to Symbols. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:SYMbol:CSYMVALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:SYMbol:CSYMVALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:SYMbol:CSYMVALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:SYMbol:CSYMVALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:SYMbol:CSYMVALue?
Info
  • SEARCH<x> is the Search identifier number.
  • <QString> specifies the 10 bit value.

SearchSearchItemTriggerABusS8b10bSymbolEbitvalue

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:SYMbol:EBITVALue command.

Description
  • This command specifies the 8 bit value to be used when searching on an 8b10b signal. The default is all X’s (don’t care). The search condition needs to be set to Symbols. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:SYMbol:EBITVALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:SYMbol:EBITVALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:SYMbol:EBITVALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:SYMbol:EBITVALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:SYMbol:EBITVALue?
Info
  • SEARCH<x> is the Search identifier number.
  • <QString> specifies the 8 bit value.

SearchSearchItemTriggerABusS8b10bSymbolMode

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:SYMbol:MODe command.

Description
  • This command sets or queries the mode of data search to be used when searching on 8b10b signal. The search condition must be set to Symbols.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:SYMbol:MODe? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:SYMbol:MODe? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:SYMbol:MODe value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:SYMbol:MODe {EBIT|TBIT|SYMB}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:SYMbol:MODe?
Info
  • SEARCH<x> is the number of the search.
  • EBIT specifies searching for Eight Bit data.
  • TBIT specifies searching for Ten bit data (6 bits and 4 bits combined). Only valid values are considered.
  • SYMB specifies searching for symbol data with disparity. Takes only K and D with possible values.

SearchSearchItemTriggerABusS8b10bSymbolTbitrdneg

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:SYMbol:TBITRDNeg command.

Description
  • This command specifies the 10 bit RD negative value to be used when searching on an 8b10b signal. The default is all X’s (don’t care). The search condition needs to be set to Symbols. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:SYMbol:TBITRDNeg? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:SYMbol:TBITRDNeg? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:SYMbol:TBITRDNeg value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:SYMbol:TBITRDNeg <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:SYMbol:TBITRDNeg?
Info
  • SEARCH<x> is the Search identifier number.
  • <QString> specifies the 10 bit RD negative value.

SearchSearchItemTriggerABusS8b10bSymbolTbitrdpos

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:SYMbol:TBITRDPos command.

Description
  • This command specifies the 10 bit RD positive value to be used when searching on an 8b10b signal. The default is all X’s (don’t care). The search condition needs to be set to Symbols. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:SYMbol:TBITRDPos? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:SYMbol:TBITRDPos? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:SYMbol:TBITRDPos value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:SYMbol:TBITRDPos <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:SYMbol:TBITRDPos?
Info
  • SEARCH<x> is the Search identifier number.
  • <QString> specifies the 10 bit RD positive value.

SearchSearchItemTriggerABusS8b10bSymbolTbitvalue

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:SYMbol:TBITVALue command.

Description
  • This command specifies the 10 bit value to be used when searching on an 8b10b signal. The default is all X’s (don’t care). The search condition needs to be set to Symbols. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:SYMbol:TBITVALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:SYMbol:TBITVALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:SYMbol:TBITVALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:SYMbol:TBITVALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:SYMbol:TBITVALue?
Info
  • SEARCH<x> is the Search identifier number.
  • <QString> specifies the 10 bit value.

SearchSearchItemTriggerABusS8b10bSymbolType

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:SYMbol:TYPe command.

Description
  • This command sets or queries the type of symbol when searching on 8b10b signal. The search condition must be set to Symbols.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:SYMbol:TYPe? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:SYMbol:TYPe? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:SYMbol:TYPe value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:SYMbol:TYPe {DATa|CONTrol}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:SYMbol:TYPe?
Info
  • SEARCH<x> is the number of the search.
  • DATa specifies searching for Data Symbols.
  • CONTrol specifies searching for Control Symbols.

SearchSearchItemTriggerABusSdlc

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC? query and raise an AssertionError if the returned value does not match value.
Info
  • SEARCH<x> is the number of the search.
Properties
  • .address: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:ADDRess command tree.
  • .condition: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:CONDition command.
  • .data: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:DATa command tree.
  • .error: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:ERROR command tree.
  • .frame: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:FRAMe command tree.
  • .staddress: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:STADDress command tree.
  • .supervisory: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:SUPervisory command tree.
  • .unnumbered: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:UNNumbered command tree.

address property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:ADDRess command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:ADDRess? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:ADDRess? query and raise an AssertionError if the returned value does not match value.
Info
  • SEARCH<x> is the number of the search.
Sub-properties
  • .type: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:ADDRess:TYPe command.

condition property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:CONDition command.

Description
  • This command sets or queries the trigger condition for a SDLC bus.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:CONDition? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:CONDition? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:CONDition value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:CONDition {STARt|DATa|ABORt|ADDRess|UNNumbered|INFormation|SUPervisory|ERRors|END}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:CONDition?
Info
  • SEARCH<x> is the number of the search.
  • STARt specifies start as the field within a SDLC frame to search on. The default Trigger on Condtion is STARt.
  • DATa specifies data as the field within a SDLC frame to search on.
  • ABORt specifies abort as the field within a SDLC frame to search on.
  • ADDRess specifies address as the field within a SDLC frame to search on.
  • UNNumbered specifies unnumbered as the field within a SDLC frame to search on.
  • INFormation specifies information as the field within a SDLC frame to search on.
  • SUPervisory specifies supervisory as the field within a SDLC frame to search on.
  • ERRors specifies errors as the field within a SDLC frame to search on.
  • END specifies end as the field within a SDLC frame to search on.

data property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:DATa command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:DATa? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:DATa? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .size: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:DATa:SIZe command.
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:DATa:VALue command.

error property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:ERROR command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:ERROR? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:ERROR? query and raise an AssertionError if the returned value does not match value.
Info
  • SEARCH<x> is the number of the search.
Sub-properties
  • .type: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:ERROR:TYPe command.

frame property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:FRAMe command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:FRAMe? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:FRAMe? query and raise an AssertionError if the returned value does not match value.
Info
  • SEARCH<x> is the number of the search.
Sub-properties
  • .type: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:FRAMe:TYPe command.

staddress property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:STADDress command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:STADDress? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:STADDress? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:STADDress:VALue command.

supervisory property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:SUPervisory command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:SUPervisory? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:SUPervisory? query and raise an AssertionError if the returned value does not match value.
Info
  • SEARCH<x> is the number of the search.
Sub-properties
  • .frametype: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:SUPervisory:FRAMETYPe command.

unnumbered property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:UNNumbered command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:UNNumbered? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:UNNumbered? query and raise an AssertionError if the returned value does not match value.
Info
  • SEARCH<x> is the number of the search.
Sub-properties
  • .frametype: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:UNNumbered:FRAMETYPe command.

SearchSearchItemTriggerABusSdlcAddress

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:ADDRess command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:ADDRess? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:ADDRess? query and raise an AssertionError if the returned value does not match value.
Info
  • SEARCH<x> is the number of the search.
Properties
  • .type: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:ADDRess:TYPe command.

type property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:ADDRess:TYPe command.

Description
  • This commands specifies the Address type in SDLC frame which can be Broadcast, No-Station and Address value can be specified.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:ADDRess:TYPe? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:ADDRess:TYPe? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:ADDRess:TYPe value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:ADDRess:TYPe {BROadcast|NOSTATion|STATIONADDr}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:ADDRess:TYPe?
Info
  • SEARCH<x> is the number of the search.
  • BROadcast specifies the Broadcast as the field within a SDLC frame to search on. BROadcast is the default value.
  • NOSTATion specifies the No-Station as the field within a SDLC frame to search on.
  • STATIONADDr specifies the Address as the field within a SDLC frame to search on.

SearchSearchItemTriggerABusSdlcAddressType

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:ADDRess:TYPe command.

Description
  • This commands specifies the Address type in SDLC frame which can be Broadcast, No-Station and Address value can be specified.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:ADDRess:TYPe? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:ADDRess:TYPe? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:ADDRess:TYPe value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:ADDRess:TYPe {BROadcast|NOSTATion|STATIONADDr}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:ADDRess:TYPe?
Info
  • SEARCH<x> is the number of the search.
  • BROadcast specifies the Broadcast as the field within a SDLC frame to search on. BROadcast is the default value.
  • NOSTATion specifies the No-Station as the field within a SDLC frame to search on.
  • STATIONADDr specifies the Address as the field within a SDLC frame to search on.

SearchSearchItemTriggerABusSdlcCondition

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:CONDition command.

Description
  • This command sets or queries the trigger condition for a SDLC bus.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:CONDition? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:CONDition? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:CONDition value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:CONDition {STARt|DATa|ABORt|ADDRess|UNNumbered|INFormation|SUPervisory|ERRors|END}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:CONDition?
Info
  • SEARCH<x> is the number of the search.
  • STARt specifies start as the field within a SDLC frame to search on. The default Trigger on Condtion is STARt.
  • DATa specifies data as the field within a SDLC frame to search on.
  • ABORt specifies abort as the field within a SDLC frame to search on.
  • ADDRess specifies address as the field within a SDLC frame to search on.
  • UNNumbered specifies unnumbered as the field within a SDLC frame to search on.
  • INFormation specifies information as the field within a SDLC frame to search on.
  • SUPervisory specifies supervisory as the field within a SDLC frame to search on.
  • ERRors specifies errors as the field within a SDLC frame to search on.
  • END specifies end as the field within a SDLC frame to search on.

SearchSearchItemTriggerABusSdlcData

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:DATa command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:DATa? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:DATa? query and raise an AssertionError if the returned value does not match value.
Properties
  • .size: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:DATa:SIZe command.
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:DATa:VALue command.

size property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:DATa:SIZe command.

Description
  • This command specifies the length of the data string in bytes to be used for SDLC triggering if the trigger condition is DATA. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:DATa:SIZe? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:DATa:SIZe? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:DATa:SIZe value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:DATa:SIZe <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:DATa:SIZe?
Info
  • <NR3> is the length of the data string in bytes. The default Data size is 1, otherwise ranges between 1 to 5.

value property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:DATa:VALue command.

Description
  • This command specifies the binary data string used for SDLC triggering if the trigger condition is DATA. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:DATa:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:DATa:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:DATa:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:DATa:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:DATa:VALue?
Info
  • <QString> specifies the value of the data string. The default value is XXXXXXXX.

SearchSearchItemTriggerABusSdlcDataSize

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:DATa:SIZe command.

Description
  • This command specifies the length of the data string in bytes to be used for SDLC triggering if the trigger condition is DATA. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:DATa:SIZe? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:DATa:SIZe? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:DATa:SIZe value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:DATa:SIZe <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:DATa:SIZe?
Info
  • <NR3> is the length of the data string in bytes. The default Data size is 1, otherwise ranges between 1 to 5.

SearchSearchItemTriggerABusSdlcDataValue

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:DATa:VALue command.

Description
  • This command specifies the binary data string used for SDLC triggering if the trigger condition is DATA. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:DATa:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:DATa:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:DATa:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:DATa:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:DATa:VALue?
Info
  • <QString> specifies the value of the data string. The default value is XXXXXXXX.

SearchSearchItemTriggerABusSdlcError

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:ERROR command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:ERROR? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:ERROR? query and raise an AssertionError if the returned value does not match value.
Info
  • SEARCH<x> is the number of the search.
Properties
  • .type: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:ERROR:TYPe command.

type property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:ERROR:TYPe command.

Description
  • This command sets or queries the Error Type in SDLC bus.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:ERROR:TYPe? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:ERROR:TYPe? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:ERROR:TYPe value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:ERROR:TYPe {FCS|NUMERICORDer}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:ERROR:TYPe?
Info
  • SEARCH<x> is the number of the search.
  • FCS sets FCS as the Error Type in SDLC bus. The default error type condition is FCS.
  • NUMERICORDer sets NUMERICORDer as the Error Type in SDLC bus.

SearchSearchItemTriggerABusSdlcErrorType

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:ERROR:TYPe command.

Description
  • This command sets or queries the Error Type in SDLC bus.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:ERROR:TYPe? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:ERROR:TYPe? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:ERROR:TYPe value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:ERROR:TYPe {FCS|NUMERICORDer}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:ERROR:TYPe?
Info
  • SEARCH<x> is the number of the search.
  • FCS sets FCS as the Error Type in SDLC bus. The default error type condition is FCS.
  • NUMERICORDer sets NUMERICORDer as the Error Type in SDLC bus.

SearchSearchItemTriggerABusSdlcFrame

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:FRAMe command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:FRAMe? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:FRAMe? query and raise an AssertionError if the returned value does not match value.
Info
  • SEARCH<x> is the number of the search.
Properties
  • .type: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:FRAMe:TYPe command.

type property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:FRAMe:TYPe command.

Description
  • This command sets or queries the Frame Type in SDLC bus.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:FRAMe:TYPe? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:FRAMe:TYPe? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:FRAMe:TYPe value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:FRAMe:TYPe {COMMand|RESPonse|BOTH}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:FRAMe:TYPe?
Info
  • SEARCH<x> is the number of the search.
  • COMMand sets Command as the Frame Type in SDLC bus. The default value of frame type for SDLC Unnumbered frame is Command.
  • RESPonse sets Response as the Frame Type in SDLC bus.
  • BOTH sets both Command and Response as the Frame Type in SDLC bus.

SearchSearchItemTriggerABusSdlcFrameType

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:FRAMe:TYPe command.

Description
  • This command sets or queries the Frame Type in SDLC bus.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:FRAMe:TYPe? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:FRAMe:TYPe? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:FRAMe:TYPe value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:FRAMe:TYPe {COMMand|RESPonse|BOTH}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:FRAMe:TYPe?
Info
  • SEARCH<x> is the number of the search.
  • COMMand sets Command as the Frame Type in SDLC bus. The default value of frame type for SDLC Unnumbered frame is Command.
  • RESPonse sets Response as the Frame Type in SDLC bus.
  • BOTH sets both Command and Response as the Frame Type in SDLC bus.

SearchSearchItemTriggerABusSdlcStaddress

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:STADDress command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:STADDress? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:STADDress? query and raise an AssertionError if the returned value does not match value.
Properties
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:STADDress:VALue command.

value property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:STADDress:VALue command.

Description
  • This command specifies the binary Station Address string used for SDLC triggering if the trigger condition is Address. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:STADDress:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:STADDress:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:STADDress:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:STADDress:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:STADDress:VALue?
Info
  • <QString> specifies the value of the data string. The default value is XXXXXXXX.

SearchSearchItemTriggerABusSdlcStaddressValue

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:STADDress:VALue command.

Description
  • This command specifies the binary Station Address string used for SDLC triggering if the trigger condition is Address. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:STADDress:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:STADDress:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:STADDress:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:STADDress:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:STADDress:VALue?
Info
  • <QString> specifies the value of the data string. The default value is XXXXXXXX.

SearchSearchItemTriggerABusSdlcSupervisory

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:SUPervisory command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:SUPervisory? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:SUPervisory? query and raise an AssertionError if the returned value does not match value.
Info
  • SEARCH<x> is the number of the search.
Properties
  • .frametype: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:SUPervisory:FRAMETYPe command.

frametype property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:SUPervisory:FRAMETYPe command.

Description
  • This command sets or queries the Supervisory Frame Type in SDLC bus.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:SUPervisory:FRAMETYPe? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:SUPervisory:FRAMETYPe? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:SUPervisory:FRAMETYPe value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:SUPervisory:FRAMETYPe {RR|RNR|REJ}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:SUPervisory:FRAMETYPe?
Info
  • SEARCH<x> is the number of the search.
  • RR sets the frame type as RR.
  • RNR sets the frame type as RNR.
  • REJ sets the frame type as REJ.

SearchSearchItemTriggerABusSdlcSupervisoryFrametype

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:SUPervisory:FRAMETYPe command.

Description
  • This command sets or queries the Supervisory Frame Type in SDLC bus.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:SUPervisory:FRAMETYPe? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:SUPervisory:FRAMETYPe? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:SUPervisory:FRAMETYPe value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:SUPervisory:FRAMETYPe {RR|RNR|REJ}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:SUPervisory:FRAMETYPe?
Info
  • SEARCH<x> is the number of the search.
  • RR sets the frame type as RR.
  • RNR sets the frame type as RNR.
  • REJ sets the frame type as REJ.

SearchSearchItemTriggerABusSdlcUnnumbered

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:UNNumbered command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:UNNumbered? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:UNNumbered? query and raise an AssertionError if the returned value does not match value.
Info
  • SEARCH<x> is the number of the search.
Properties
  • .frametype: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:UNNumbered:FRAMETYPe command.

frametype property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:UNNumbered:FRAMETYPe command.

Description
  • This command sets or queries the Unnumbered Frame Type in SDLC bus.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:UNNumbered:FRAMETYPe? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:UNNumbered:FRAMETYPe? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:UNNumbered:FRAMETYPe value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:UNNumbered:FRAMETYPe {UP|UI|SNRM|SNRME|REQDISConnect|UACK|REQSETINIT|DISCMODe|FRAMEREJ|TEST|XID|CONFigure|BEACon}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:UNNumbered:FRAMETYPe?
Info
  • SEARCH<x> is the number of the search.
  • UP sets the Unnumbered Frame Type as UP.
  • UI sets the Unnumbered Frame Type as UI.
  • SNRM sets the Unnumbered Frame Type as SNRM.
  • SNRME sets the Unnumbered Frame Type as SNRME.
  • REQDISConnect sets the Unnumbered Frame Type as REQDISConnect.
  • UACK sets the Unnumbered Frame Type as UACK.
  • REQSETINIT sets the Unnumbered Frame Type as REQSETINIT.
  • DISCMODe sets the Unnumbered Frame Type as DISCMODe.
  • FRAMEREJ sets the Unnumbered Frame Type as FRAMEREJ.
  • TEST sets the Unnumbered Frame Type as TEST.
  • XID sets the Unnumbered Frame Type as XID.
  • CONFigure sets the Unnumbered Frame Type as CONFigure.
  • BEACon sets the Unnumbered Frame Type as BEACon.

SearchSearchItemTriggerABusSdlcUnnumberedFrametype

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:UNNumbered:FRAMETYPe command.

Description
  • This command sets or queries the Unnumbered Frame Type in SDLC bus.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:UNNumbered:FRAMETYPe? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:UNNumbered:FRAMETYPe? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:UNNumbered:FRAMETYPe value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:UNNumbered:FRAMETYPe {UP|UI|SNRM|SNRME|REQDISConnect|UACK|REQSETINIT|DISCMODe|FRAMEREJ|TEST|XID|CONFigure|BEACon}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:UNNumbered:FRAMETYPe?
Info
  • SEARCH<x> is the number of the search.
  • UP sets the Unnumbered Frame Type as UP.
  • UI sets the Unnumbered Frame Type as UI.
  • SNRM sets the Unnumbered Frame Type as SNRM.
  • SNRME sets the Unnumbered Frame Type as SNRME.
  • REQDISConnect sets the Unnumbered Frame Type as REQDISConnect.
  • UACK sets the Unnumbered Frame Type as UACK.
  • REQSETINIT sets the Unnumbered Frame Type as REQSETINIT.
  • DISCMODe sets the Unnumbered Frame Type as DISCMODe.
  • FRAMEREJ sets the Unnumbered Frame Type as FRAMEREJ.
  • TEST sets the Unnumbered Frame Type as TEST.
  • XID sets the Unnumbered Frame Type as XID.
  • CONFigure sets the Unnumbered Frame Type as CONFigure.
  • BEACon sets the Unnumbered Frame Type as BEACon.

SearchSearchItemTriggerABusSent

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT? query and raise an AssertionError if the returned value does not match value.
Info
  • SEARCH<x> is the number of the search.
Properties
  • .condition: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:CONDition command.
  • .errtype: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:ERRType command.
  • .fast: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST command tree.
  • .pause: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:PAUSE command tree.
  • .slow: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:SLOW command tree.

condition property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:CONDition command.

Description
  • This command sets or queries the search condition for a SENT bus.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:CONDition? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:CONDition? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:CONDition value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:CONDition {START|FAST|SLOW|PAUSE|ERRor}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:CONDition?
Info
  • SEARCH<x> is the number of the search.
  • START specifies searching for start of packet.
  • FAST specifies searching for fast channel data.
  • SLOW specifies searching for slow channel data.
  • PAUSE specifies searching for pause pulses.
  • ERRor specifies searching on errors.

errtype property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:ERRType command.

Description
  • This command sets or queries the error type to be used when searching on SENT data.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:ERRType? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:ERRType? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:ERRType value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:ERRType {FRAMELENgth|CRC}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:ERRType?
Info
  • SEARCH<x> is the number of the search.
  • FRAMELENgth specifies searching for SENT frame length errors.
  • CRC specifies searching for CRC errors.
Sub-properties
  • .crc: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:ERRType:CRC command.

fast property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST? query and raise an AssertionError if the returned value does not match value.
Info
  • SEARCH<x> is the Search identifier number.
Sub-properties
  • .chan1a: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN1A command tree.
  • .chan2b: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN2B command tree.
  • .counter: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:COUNTer command tree.
  • .invertnibble: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:INVERTNIBble command tree.
  • .status: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:STATus command tree.

pause property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:PAUSE command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:PAUSE? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:PAUSE? query and raise an AssertionError if the returned value does not match value.
Info
  • SEARCH<x> is the number of the search.
Sub-properties
  • .qualifier: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:PAUSE:QUALifier command.
  • .ticks: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:PAUSE:TICKs command tree.

slow property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:SLOW command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:SLOW? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:SLOW? query and raise an AssertionError if the returned value does not match value.
Info
  • SEARCH<x> is the Search identifier number.
Sub-properties
  • .data: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:SLOW:DATA command tree.
  • .identifier: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:SLOW:IDentifier command tree.

SearchSearchItemTriggerABusSentCondition

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:CONDition command.

Description
  • This command sets or queries the search condition for a SENT bus.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:CONDition? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:CONDition? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:CONDition value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:CONDition {START|FAST|SLOW|PAUSE|ERRor}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:CONDition?
Info
  • SEARCH<x> is the number of the search.
  • START specifies searching for start of packet.
  • FAST specifies searching for fast channel data.
  • SLOW specifies searching for slow channel data.
  • PAUSE specifies searching for pause pulses.
  • ERRor specifies searching on errors.

SearchSearchItemTriggerABusSentErrtype

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:ERRType command.

Description
  • This command sets or queries the error type to be used when searching on SENT data.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:ERRType? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:ERRType? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:ERRType value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:ERRType {FRAMELENgth|CRC}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:ERRType?
Info
  • SEARCH<x> is the number of the search.
  • FRAMELENgth specifies searching for SENT frame length errors.
  • CRC specifies searching for CRC errors.
Properties
  • .crc: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:ERRType:CRC command.

crc property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:ERRType:CRC command.

Description
  • This command sets or queries the CRC error type to be used when searching on SENT data.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:ERRType:CRC? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:ERRType:CRC? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:ERRType:CRC value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:ERRType:CRC {FAST|SLOW}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:ERRType:CRC?
Info
  • SEARCH<x> is the number of the search.
  • FAST specifies searching for CRC errors only in the fast channel.
  • SLOW specifies searching for CRC errors only in the slow channel.

SearchSearchItemTriggerABusSentErrtypeCrc

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:ERRType:CRC command.

Description
  • This command sets or queries the CRC error type to be used when searching on SENT data.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:ERRType:CRC? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:ERRType:CRC? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:ERRType:CRC value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:ERRType:CRC {FAST|SLOW}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:ERRType:CRC?
Info
  • SEARCH<x> is the number of the search.
  • FAST specifies searching for CRC errors only in the fast channel.
  • SLOW specifies searching for CRC errors only in the slow channel.

SearchSearchItemTriggerABusSentFast

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST? query and raise an AssertionError if the returned value does not match value.
Info
  • SEARCH<x> is the Search identifier number.
Properties
  • .chan1a: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN1A command tree.
  • .chan2b: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN2B command tree.
  • .counter: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:COUNTer command tree.
  • .invertnibble: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:INVERTNIBble command tree.
  • .status: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:STATus command tree.

chan1a property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN1A command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN1A? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN1A? query and raise an AssertionError if the returned value does not match value.
Info
  • SEARCH<x> is the Search identifier number.
Sub-properties
  • .hivalue: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN1A:HIVALue command.
  • .qualifier: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN1A:QUALifier command.
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN1A:VALue command.

chan2b property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN2B command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN2B? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN2B? query and raise an AssertionError if the returned value does not match value.
Info
  • SEARCH<x> is the Search identifier number.
Sub-properties
  • .hivalue: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN2B:HIVALue command.
  • .qualifier: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN2B:QUALifier command.
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN2B:VALue command.

counter property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:COUNTer command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:COUNTer? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:COUNTer? query and raise an AssertionError if the returned value does not match value.
Info
  • SEARCH<x> is the Search identifier number.
Sub-properties
  • .hivalue: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:COUNTer:HIVALue command.
  • .qualifier: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:COUNTer:QUALifier command.
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:COUNTer:VALue command.

invertnibble property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:INVERTNIBble command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:INVERTNIBble? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:INVERTNIBble? query and raise an AssertionError if the returned value does not match value.
Info
  • SEARCH<x> is the number of the search.
Sub-properties
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:INVERTNIBble:VALue command.

status property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:STATus command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:STATus? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:STATus? query and raise an AssertionError if the returned value does not match value.
Info
  • SEARCH<x> is the number of the search.
Sub-properties
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:STATus:VALue command.

SearchSearchItemTriggerABusSentFastChan1a

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN1A command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN1A? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN1A? query and raise an AssertionError if the returned value does not match value.
Info
  • SEARCH<x> is the Search identifier number.
Properties
  • .hivalue: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN1A:HIVALue command.
  • .qualifier: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN1A:QUALifier command.
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN1A:VALue command.

hivalue property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN1A:HIVALue command.

Description
  • This command sets or queries the high binary fast channel 1 value to use when searching on a SENT bus signal.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN1A:HIVALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN1A:HIVALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN1A:HIVALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN1A:HIVALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN1A:HIVALue?
Info
  • SEARCH<x> is the Search identifier number.
  • <QString> sets the Fast Channel 1 binary data high value.

qualifier property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN1A:QUALifier command.

Description
  • This command sets or queries the qualifier to be used when searching on SENT fast packet bus data for device channel 1.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN1A:QUALifier? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN1A:QUALifier? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN1A:QUALifier value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN1A:QUALifier {EQual|UNEQual|LESSthan|MOREthan|LESSEQual|MOREEQual|INrange|OUTrange}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN1A:QUALifier?
Info
  • SEARCH<x> is the number of the search.
  • EQual specifies the qualifier as Equal.
  • LESSEQual specifies the qualifier as Less Than or Equal to.
  • LESSthan specifies the qualifier as Less Than.
  • MOREEQual specifies the qualifier as More Than or Equal to.
  • MOREthan specifies the qualifier as More Than.
  • UNEQual specifies the qualifier as Unequal.
  • INrange sets the qualifier to inside a range.
  • OUTrange sets the qualifier to outside a range.

value property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN1A:VALue command.

Description
  • This command sets or queries the binary fast channel 1 value to be used when searching on a SENT bus signal.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN1A:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN1A:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN1A:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN1A:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN1A:VALue?
Info
  • SEARCH<x> is the number of the search.
  • <QString> is the Fast Channel 1 binary value.

SearchSearchItemTriggerABusSentFastChan1aHivalue

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN1A:HIVALue command.

Description
  • This command sets or queries the high binary fast channel 1 value to use when searching on a SENT bus signal.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN1A:HIVALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN1A:HIVALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN1A:HIVALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN1A:HIVALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN1A:HIVALue?
Info
  • SEARCH<x> is the Search identifier number.
  • <QString> sets the Fast Channel 1 binary data high value.

SearchSearchItemTriggerABusSentFastChan1aQualifier

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN1A:QUALifier command.

Description
  • This command sets or queries the qualifier to be used when searching on SENT fast packet bus data for device channel 1.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN1A:QUALifier? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN1A:QUALifier? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN1A:QUALifier value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN1A:QUALifier {EQual|UNEQual|LESSthan|MOREthan|LESSEQual|MOREEQual|INrange|OUTrange}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN1A:QUALifier?
Info
  • SEARCH<x> is the number of the search.
  • EQual specifies the qualifier as Equal.
  • LESSEQual specifies the qualifier as Less Than or Equal to.
  • LESSthan specifies the qualifier as Less Than.
  • MOREEQual specifies the qualifier as More Than or Equal to.
  • MOREthan specifies the qualifier as More Than.
  • UNEQual specifies the qualifier as Unequal.
  • INrange sets the qualifier to inside a range.
  • OUTrange sets the qualifier to outside a range.

SearchSearchItemTriggerABusSentFastChan1aValue

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN1A:VALue command.

Description
  • This command sets or queries the binary fast channel 1 value to be used when searching on a SENT bus signal.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN1A:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN1A:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN1A:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN1A:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN1A:VALue?
Info
  • SEARCH<x> is the number of the search.
  • <QString> is the Fast Channel 1 binary value.

SearchSearchItemTriggerABusSentFastChan2b

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN2B command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN2B? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN2B? query and raise an AssertionError if the returned value does not match value.
Info
  • SEARCH<x> is the Search identifier number.
Properties
  • .hivalue: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN2B:HIVALue command.
  • .qualifier: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN2B:QUALifier command.
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN2B:VALue command.

hivalue property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN2B:HIVALue command.

Description
  • This command sets or queries the high binary fast channel 2 value to use when searching on a SENT bus signal.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN2B:HIVALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN2B:HIVALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN2B:HIVALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN2B:HIVALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN2B:HIVALue?
Info
  • SEARCH<x> is the Search identifier number.
  • <QString> sets the Fast Channel 2 high binary data value.

qualifier property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN2B:QUALifier command.

Description
  • This command sets or queries the qualifier to be used when searching on SENT fast packet bus data for device channel 2.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN2B:QUALifier? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN2B:QUALifier? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN2B:QUALifier value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN2B:QUALifier {EQual|UNEQual|LESSthan|MOREthan|LESSEQual|MOREEQual|INrange|OUTrange}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN2B:QUALifier?
Info
  • SEARCH<x> is the number of the search.
  • EQual specifies the qualifier as Equal.
  • LESSEQual specifies the qualifier as Less Than or Equal to.
  • LESSthan specifies the qualifier as Less Than.
  • MOREEQual specifies the qualifier as More Than or Equal to.
  • MOREthan specifies the qualifier as More Than.
  • UNEQual specifies the qualifier as Unequal.
  • INrange sets the qualifier to inside a range.
  • OUTrange sets the qualifier to outside a range.

value property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN2B:VALue command.

Description
  • This command sets or queries the binary fast channel 2 value to be used when searching on a SENT bus signal.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN2B:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN2B:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN2B:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN2B:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN2B:VALue?
Info
  • SEARCH<x> is the number of the search.
  • <QString> is the Fast Channel 2 binary value.

SearchSearchItemTriggerABusSentFastChan2bHivalue

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN2B:HIVALue command.

Description
  • This command sets or queries the high binary fast channel 2 value to use when searching on a SENT bus signal.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN2B:HIVALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN2B:HIVALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN2B:HIVALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN2B:HIVALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN2B:HIVALue?
Info
  • SEARCH<x> is the Search identifier number.
  • <QString> sets the Fast Channel 2 high binary data value.

SearchSearchItemTriggerABusSentFastChan2bQualifier

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN2B:QUALifier command.

Description
  • This command sets or queries the qualifier to be used when searching on SENT fast packet bus data for device channel 2.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN2B:QUALifier? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN2B:QUALifier? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN2B:QUALifier value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN2B:QUALifier {EQual|UNEQual|LESSthan|MOREthan|LESSEQual|MOREEQual|INrange|OUTrange}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN2B:QUALifier?
Info
  • SEARCH<x> is the number of the search.
  • EQual specifies the qualifier as Equal.
  • LESSEQual specifies the qualifier as Less Than or Equal to.
  • LESSthan specifies the qualifier as Less Than.
  • MOREEQual specifies the qualifier as More Than or Equal to.
  • MOREthan specifies the qualifier as More Than.
  • UNEQual specifies the qualifier as Unequal.
  • INrange sets the qualifier to inside a range.
  • OUTrange sets the qualifier to outside a range.

SearchSearchItemTriggerABusSentFastChan2bValue

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN2B:VALue command.

Description
  • This command sets or queries the binary fast channel 2 value to be used when searching on a SENT bus signal.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN2B:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN2B:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN2B:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN2B:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN2B:VALue?
Info
  • SEARCH<x> is the number of the search.
  • <QString> is the Fast Channel 2 binary value.

SearchSearchItemTriggerABusSentFastCounter

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:COUNTer command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:COUNTer? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:COUNTer? query and raise an AssertionError if the returned value does not match value.
Info
  • SEARCH<x> is the Search identifier number.
Properties
  • .hivalue: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:COUNTer:HIVALue command.
  • .qualifier: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:COUNTer:QUALifier command.
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:COUNTer:VALue command.

hivalue property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:COUNTer:HIVALue command.

Description
  • This command sets or queries the high binary fast message counter value to use when searching on a SENT bus signal.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:COUNTer:HIVALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:COUNTer:HIVALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:COUNTer:HIVALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:COUNTer:HIVALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:COUNTer:HIVALue?
Info
  • SEARCH<x> is the Search identifier number.
  • <QString> sets the Fast Channel 1 counter binary value.

qualifier property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:COUNTer:QUALifier command.

Description
  • This command sets or queries the qualifier to be used when searching on SENT fast packet bus data for the secure format counter. The SENT bus trigger condition must be set to FAST.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:COUNTer:QUALifier? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:COUNTer:QUALifier? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:COUNTer:QUALifier value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:COUNTer:QUALifier {EQual|UNEQual|LESSthan|MOREthan|LESSEQual|MOREEQual|INrange|OUTrange}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:COUNTer:QUALifier?
Info
  • SEARCH<x> is the number of the search.
  • EQual specifies the qualifier as Equal.
  • LESSEQual specifies the qualifier as Less Than or Equal to.
  • LESSthan specifies the qualifier as Less Than.
  • MOREEQual specifies the qualifier as More Than or Equal to.
  • MOREthan specifies the qualifier as More Than.
  • UNEQual specifies the qualifier as Unequal.
  • INrange sets the qualifier to inside a range.
  • OUTrange sets the qualifier to outside a range.

value property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:COUNTer:VALue command.

Description
  • This command sets or queries the binary fast message counter value to be used when searching on a SENT bus signal
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:COUNTer:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:COUNTer:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:COUNTer:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:COUNTer:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:COUNTer:VALue?
Info
  • SEARCH<x> is the number of the search.
  • <QString> is the Fast Channel 1 counter value.

SearchSearchItemTriggerABusSentFastCounterHivalue

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:COUNTer:HIVALue command.

Description
  • This command sets or queries the high binary fast message counter value to use when searching on a SENT bus signal.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:COUNTer:HIVALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:COUNTer:HIVALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:COUNTer:HIVALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:COUNTer:HIVALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:COUNTer:HIVALue?
Info
  • SEARCH<x> is the Search identifier number.
  • <QString> sets the Fast Channel 1 counter binary value.

SearchSearchItemTriggerABusSentFastCounterQualifier

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:COUNTer:QUALifier command.

Description
  • This command sets or queries the qualifier to be used when searching on SENT fast packet bus data for the secure format counter. The SENT bus trigger condition must be set to FAST.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:COUNTer:QUALifier? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:COUNTer:QUALifier? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:COUNTer:QUALifier value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:COUNTer:QUALifier {EQual|UNEQual|LESSthan|MOREthan|LESSEQual|MOREEQual|INrange|OUTrange}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:COUNTer:QUALifier?
Info
  • SEARCH<x> is the number of the search.
  • EQual specifies the qualifier as Equal.
  • LESSEQual specifies the qualifier as Less Than or Equal to.
  • LESSthan specifies the qualifier as Less Than.
  • MOREEQual specifies the qualifier as More Than or Equal to.
  • MOREthan specifies the qualifier as More Than.
  • UNEQual specifies the qualifier as Unequal.
  • INrange sets the qualifier to inside a range.
  • OUTrange sets the qualifier to outside a range.

SearchSearchItemTriggerABusSentFastCounterValue

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:COUNTer:VALue command.

Description
  • This command sets or queries the binary fast message counter value to be used when searching on a SENT bus signal
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:COUNTer:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:COUNTer:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:COUNTer:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:COUNTer:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:COUNTer:VALue?
Info
  • SEARCH<x> is the number of the search.
  • <QString> is the Fast Channel 1 counter value.

SearchSearchItemTriggerABusSentFastInvertnibble

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:INVERTNIBble command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:INVERTNIBble? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:INVERTNIBble? query and raise an AssertionError if the returned value does not match value.
Info
  • SEARCH<x> is the number of the search.
Properties
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:INVERTNIBble:VALue command.

value property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:INVERTNIBble:VALue command.

Description
  • This command sets or queries the binary fast message inverted nibble value to be used when searching on a SENT bus signal.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:INVERTNIBble:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:INVERTNIBble:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:INVERTNIBble:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:INVERTNIBble:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:INVERTNIBble:VALue?
Info
  • SEARCH<x> is the number of the search.
  • <QString> is the fast message inverted nibble binary value.

SearchSearchItemTriggerABusSentFastInvertnibbleValue

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:INVERTNIBble:VALue command.

Description
  • This command sets or queries the binary fast message inverted nibble value to be used when searching on a SENT bus signal.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:INVERTNIBble:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:INVERTNIBble:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:INVERTNIBble:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:INVERTNIBble:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:INVERTNIBble:VALue?
Info
  • SEARCH<x> is the number of the search.
  • <QString> is the fast message inverted nibble binary value.

SearchSearchItemTriggerABusSentFastStatus

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:STATus command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:STATus? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:STATus? query and raise an AssertionError if the returned value does not match value.
Info
  • SEARCH<x> is the number of the search.
Properties
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:STATus:VALue command.

value property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:STATus:VALue command.

Description
  • This command sets or queries the binary status value to be used when searching on a SENT bus signal.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:STATus:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:STATus:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:STATus:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:STATus:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:STATus:VALue?
Info
  • SEARCH<x> is the number of the search.
  • <QString> is the binary status binary value.

SearchSearchItemTriggerABusSentFastStatusValue

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:STATus:VALue command.

Description
  • This command sets or queries the binary status value to be used when searching on a SENT bus signal.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:STATus:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:STATus:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:STATus:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:STATus:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:STATus:VALue?
Info
  • SEARCH<x> is the number of the search.
  • <QString> is the binary status binary value.

SearchSearchItemTriggerABusSentPause

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:PAUSE command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:PAUSE? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:PAUSE? query and raise an AssertionError if the returned value does not match value.
Info
  • SEARCH<x> is the number of the search.
Properties
  • .qualifier: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:PAUSE:QUALifier command.
  • .ticks: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:PAUSE:TICKs command tree.

qualifier property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:PAUSE:QUALifier command.

Description
  • This command sets or queries the qualifier to be used when searching on SENT pause pulses.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:PAUSE:QUALifier? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:PAUSE:QUALifier? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:PAUSE:QUALifier value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:PAUSE:QUALifier {EQual|UNEQual|LESSthan|MOREthan|LESSEQual|MOREEQual|INrange|OUTrange}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:PAUSE:QUALifier?
Info
  • SEARCH<x> is the number of the search.
  • EQual specifies the qualifier as Equal.
  • INrange sets the qualifier to be within a range.
  • LESSEQual sets the qualifier as Less Than or Equal to.
  • LESSthan sets the qualifier as Less Than.
  • MOREEQual sets the qualifier as More Than or Equal to.
  • MOREthan sets the qualifier as More Than.
  • OUTrange sets the qualifier to be outside a range.
  • UNEQual specifies the qualifier as Unequal.

ticks property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:PAUSE:TICKs command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:PAUSE:TICKs? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:PAUSE:TICKs? query and raise an AssertionError if the returned value does not match value.
Info
  • SEARCH<x> is the number of the search.
Sub-properties
  • .hivalue: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:PAUSE:TICKs:HIVALue command.
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:PAUSE:TICKs:VALue command.

SearchSearchItemTriggerABusSentPauseQualifier

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:PAUSE:QUALifier command.

Description
  • This command sets or queries the qualifier to be used when searching on SENT pause pulses.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:PAUSE:QUALifier? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:PAUSE:QUALifier? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:PAUSE:QUALifier value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:PAUSE:QUALifier {EQual|UNEQual|LESSthan|MOREthan|LESSEQual|MOREEQual|INrange|OUTrange}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:PAUSE:QUALifier?
Info
  • SEARCH<x> is the number of the search.
  • EQual specifies the qualifier as Equal.
  • INrange sets the qualifier to be within a range.
  • LESSEQual sets the qualifier as Less Than or Equal to.
  • LESSthan sets the qualifier as Less Than.
  • MOREEQual sets the qualifier as More Than or Equal to.
  • MOREthan sets the qualifier as More Than.
  • OUTrange sets the qualifier to be outside a range.
  • UNEQual specifies the qualifier as Unequal.

SearchSearchItemTriggerABusSentPauseTicks

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:PAUSE:TICKs command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:PAUSE:TICKs? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:PAUSE:TICKs? query and raise an AssertionError if the returned value does not match value.
Info
  • SEARCH<x> is the number of the search.
Properties
  • .hivalue: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:PAUSE:TICKs:HIVALue command.
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:PAUSE:TICKs:VALue command.

hivalue property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:PAUSE:TICKs:HIVALue command.

Description
  • This command sets or queries the maximum number of pause clock ticks to be used when searching on a SENT bus signal.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:PAUSE:TICKs:HIVALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:PAUSE:TICKs:HIVALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:PAUSE:TICKs:HIVALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:PAUSE:TICKs:HIVALue <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:PAUSE:TICKs:HIVALue?
Info
  • SEARCH<x> is the number of the search.
  • <NR1> is the maximum number of pause clock ticks to be used when searching.

value property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:PAUSE:TICKs:VALue command.

Description
  • This command sets or queries the minimum number of pause clock ticks to be used when searching on a SENT bus signal.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:PAUSE:TICKs:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:PAUSE:TICKs:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:PAUSE:TICKs:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:PAUSE:TICKs:VALue <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:PAUSE:TICKs:VALue?
Info
  • SEARCH<x> is the number of the search.
  • <NR1> is the minimum number of pause clock ticks to be used when searching.

SearchSearchItemTriggerABusSentPauseTicksHivalue

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:PAUSE:TICKs:HIVALue command.

Description
  • This command sets or queries the maximum number of pause clock ticks to be used when searching on a SENT bus signal.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:PAUSE:TICKs:HIVALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:PAUSE:TICKs:HIVALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:PAUSE:TICKs:HIVALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:PAUSE:TICKs:HIVALue <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:PAUSE:TICKs:HIVALue?
Info
  • SEARCH<x> is the number of the search.
  • <NR1> is the maximum number of pause clock ticks to be used when searching.

SearchSearchItemTriggerABusSentPauseTicksValue

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:PAUSE:TICKs:VALue command.

Description
  • This command sets or queries the minimum number of pause clock ticks to be used when searching on a SENT bus signal.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:PAUSE:TICKs:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:PAUSE:TICKs:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:PAUSE:TICKs:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:PAUSE:TICKs:VALue <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:PAUSE:TICKs:VALue?
Info
  • SEARCH<x> is the number of the search.
  • <NR1> is the minimum number of pause clock ticks to be used when searching.

SearchSearchItemTriggerABusSentSlow

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:SLOW command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:SLOW? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:SLOW? query and raise an AssertionError if the returned value does not match value.
Info
  • SEARCH<x> is the Search identifier number.
Properties
  • .data: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:SLOW:DATA command tree.
  • .identifier: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:SLOW:IDentifier command tree.

data property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:SLOW:DATA command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:SLOW:DATA? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:SLOW:DATA? query and raise an AssertionError if the returned value does not match value.
Info
  • SEARCH<x> is the Search identifier number.
Sub-properties
  • .hivalue: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:SLOW:DATA:HIVALue command.
  • .qualifier: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:SLOW:DATA:QUALifier command.
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:SLOW:DATA:VALue command.

identifier property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:SLOW:IDentifier command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:SLOW:IDentifier? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:SLOW:IDentifier? query and raise an AssertionError if the returned value does not match value.
Info
  • SEARCH<x> is the number of the search.
Sub-properties
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:SLOW:IDentifier:VALue command.

SearchSearchItemTriggerABusSentSlowData

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:SLOW:DATA command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:SLOW:DATA? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:SLOW:DATA? query and raise an AssertionError if the returned value does not match value.
Info
  • SEARCH<x> is the Search identifier number.
Properties
  • .hivalue: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:SLOW:DATA:HIVALue command.
  • .qualifier: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:SLOW:DATA:QUALifier command.
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:SLOW:DATA:VALue command.

hivalue property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:SLOW:DATA:HIVALue command.

Description
  • This command sets or queries the high binary Slow channel data value to use when searching on a SENT bus signal.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:SLOW:DATA:HIVALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:SLOW:DATA:HIVALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:SLOW:DATA:HIVALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:SLOW:DATA:HIVALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:SLOW:DATA:HIVALue?
Info
  • SEARCH<x> is the Search identifier number.
  • <QString> sets the binary Slow channel data value.

qualifier property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:SLOW:DATA:QUALifier command.

Description
  • This command sets or queries the qualifier to be used when searching on SENT slow packet bus data.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:SLOW:DATA:QUALifier? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:SLOW:DATA:QUALifier? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:SLOW:DATA:QUALifier value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:SLOW:DATA:QUALifier {EQual|UNEQual|LESSthan|MOREthan|LESSEQual|MOREEQualINrange|OUTrange}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:SLOW:DATA:QUALifier?
Info
  • SEARCH<x> is the number of the search.
  • EQualspecifies the qualifier as Equal.
  • LESSEQual sets the qualifier as Less Than or Equal to.
  • LESSthansets the qualifier as Less Than.
  • MOREEQualsets the qualifier as More Than or Equal to.
  • MOREthan sets the qualifier as More Than.
  • UNEQual specifies the qualifier as Unequal.
  • INrange sets the search qualifier to inside a range.
  • OUTrange sets the search qualifier to outside a range.

value property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:SLOW:DATA:VALue command.

Description
  • This command sets or queries the binary slow channel data value to be used when searching on a SENT bus signal.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:SLOW:DATA:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:SLOW:DATA:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:SLOW:DATA:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:SLOW:DATA:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:SLOW:DATA:VALue?
Info
  • SEARCH<x> is the number of the search.
  • <QString> is the slow channel data binary value.

SearchSearchItemTriggerABusSentSlowDataHivalue

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:SLOW:DATA:HIVALue command.

Description
  • This command sets or queries the high binary Slow channel data value to use when searching on a SENT bus signal.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:SLOW:DATA:HIVALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:SLOW:DATA:HIVALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:SLOW:DATA:HIVALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:SLOW:DATA:HIVALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:SLOW:DATA:HIVALue?
Info
  • SEARCH<x> is the Search identifier number.
  • <QString> sets the binary Slow channel data value.

SearchSearchItemTriggerABusSentSlowDataQualifier

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:SLOW:DATA:QUALifier command.

Description
  • This command sets or queries the qualifier to be used when searching on SENT slow packet bus data.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:SLOW:DATA:QUALifier? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:SLOW:DATA:QUALifier? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:SLOW:DATA:QUALifier value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:SLOW:DATA:QUALifier {EQual|UNEQual|LESSthan|MOREthan|LESSEQual|MOREEQualINrange|OUTrange}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:SLOW:DATA:QUALifier?
Info
  • SEARCH<x> is the number of the search.
  • EQualspecifies the qualifier as Equal.
  • LESSEQual sets the qualifier as Less Than or Equal to.
  • LESSthansets the qualifier as Less Than.
  • MOREEQualsets the qualifier as More Than or Equal to.
  • MOREthan sets the qualifier as More Than.
  • UNEQual specifies the qualifier as Unequal.
  • INrange sets the search qualifier to inside a range.
  • OUTrange sets the search qualifier to outside a range.

SearchSearchItemTriggerABusSentSlowDataValue

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:SLOW:DATA:VALue command.

Description
  • This command sets or queries the binary slow channel data value to be used when searching on a SENT bus signal.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:SLOW:DATA:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:SLOW:DATA:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:SLOW:DATA:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:SLOW:DATA:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:SLOW:DATA:VALue?
Info
  • SEARCH<x> is the number of the search.
  • <QString> is the slow channel data binary value.

SearchSearchItemTriggerABusSentSlowIdentifier

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:SLOW:IDentifier command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:SLOW:IDentifier? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:SLOW:IDentifier? query and raise an AssertionError if the returned value does not match value.
Info
  • SEARCH<x> is the number of the search.
Properties
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:SLOW:IDentifier:VALue command.

value property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:SLOW:IDentifier:VALue command.

Description
  • This command sets or queries the binary slow identifier value to be used when searching on a SENT bus signal.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:SLOW:IDentifier:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:SLOW:IDentifier:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:SLOW:IDentifier:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:SLOW:IDentifier:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:SLOW:IDentifier:VALue?
Info
  • SEARCH<x> is the number of the search.
  • <QString> is the slow channel identifier binary value.

SearchSearchItemTriggerABusSentSlowIdentifierValue

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:SLOW:IDentifier:VALue command.

Description
  • This command sets or queries the binary slow identifier value to be used when searching on a SENT bus signal.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:SLOW:IDentifier:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:SLOW:IDentifier:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:SLOW:IDentifier:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:SLOW:IDentifier:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:SLOW:IDentifier:VALue?
Info
  • SEARCH<x> is the number of the search.
  • <QString> is the slow channel identifier binary value.

SearchSearchItemTriggerABusSmbus

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS? query and raise an AssertionError if the returned value does not match value.
Info
  • SEARCH<x> is the search identifier number.
Properties
  • .address: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:ADDRess command tree.
  • .command: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:COMMand command tree.
  • .condition: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:CONDition command.
  • .data: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:DATa command tree.
  • .deviceaddr: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:DEVICEADDR command tree.
  • .error: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:ERROr command tree.
  • .fieldbyte: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:FIELDBYTe command.
  • .udiddata: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:UDIDDATa command tree.

address property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:ADDRess command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:ADDRess? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:ADDRess? query and raise an AssertionError if the returned value does not match value.
Info
  • SEARCH<x> is the search identifier number.
Sub-properties
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:ADDRess:VALue command.

command property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:COMMand command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:COMMand? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:COMMand? query and raise an AssertionError if the returned value does not match value.
Info
  • SEARCH<x> is the search identifier number.
Sub-properties
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:COMMand:VALue command.

condition property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:CONDition command.

Description
  • This command sets or queries the trigger condition for a SMBUS bus.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:CONDition? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:CONDition? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:CONDition value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:CONDition {STARt|REPEATSTARt|ADDRess|HOSTADDR|DEVICEADDR|COMMand|DATa|UDIDDATa|ERRor|STOP|IDLe}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:CONDition?
Info
  • SEARCH<x> is the search number.
  • STARt sets the search condition to start. This is the default value.
  • REPEATSTARt sets the search condition to repeat start.
  • ADDRess sets the search condition to address.
  • HOSTADDR sets the search condition to host address.
  • DEVICEADDR sets the search condition to device address.
  • COMM and sets the search condition to command.
  • DATa sets the search condition to data.
  • UDIDDATa sets the search condition to UDID data.
  • ERRor sets the search condition to error.
  • STOP sets the search condition to stop.
  • IDLe sets the search condition to idle.

data property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:DATa command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:DATa? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:DATa? query and raise an AssertionError if the returned value does not match value.
Info
  • SEARCH<x> is the search number.
Sub-properties
  • .size: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:DATa:SIZe command.
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:DATa:VALue command.

deviceaddr property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:DEVICEADDR command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:DEVICEADDR? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:DEVICEADDR? query and raise an AssertionError if the returned value does not match value.
Info
  • SEARCH<x> is the search identifier number.
Sub-properties
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:DEVICEADDR:VALue command.

error property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:ERROr command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:ERROr? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:ERROr? query and raise an AssertionError if the returned value does not match value.
Info
  • SEARCH<x> is the search number.
Sub-properties
  • .type: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:ERROr:TYPe command.

fieldbyte property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:FIELDBYTe command.

Description
  • This command sets or queries the field byte for a SMBUS bus if trigger condition is UDID data.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:FIELDBYTe? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:FIELDBYTe? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:FIELDBYTe value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:FIELDBYTe {ONE|TWO|FOUR}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:FIELDBYTe?
Info
  • SEARCH<x> is the search number.
  • ONE sets the field byte size to 8 bits. This is the default value.
  • TWO sets the field byte size to 16 bits.
  • FOUR sets the field byte size to 32 bits.

udiddata property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:UDIDDATa command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:UDIDDATa? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:UDIDDATa? query and raise an AssertionError if the returned value does not match value.
Info
  • SEARCH<x> is the search identifier number.
Sub-properties
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:UDIDDATa:VALue command.

SearchSearchItemTriggerABusSmbusAddress

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:ADDRess command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:ADDRess? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:ADDRess? query and raise an AssertionError if the returned value does not match value.
Info
  • SEARCH<x> is the search identifier number.
Properties
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:ADDRess:VALue command.

value property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:ADDRess:VALue command.

Description
  • This command specifies the binary physical address string used for SMBUS triggering if the trigger condition is address.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:ADDRess:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:ADDRess:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:ADDRess:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:ADDRess:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:ADDRess:VALue?
Info
  • SEARCH<x> is the search identifier number.
  • <QString> specifies the address value as the field within a SMBUS frame to search on. The default value is XXXXXXX.

SearchSearchItemTriggerABusSmbusAddressValue

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:ADDRess:VALue command.

Description
  • This command specifies the binary physical address string used for SMBUS triggering if the trigger condition is address.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:ADDRess:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:ADDRess:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:ADDRess:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:ADDRess:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:ADDRess:VALue?
Info
  • SEARCH<x> is the search identifier number.
  • <QString> specifies the address value as the field within a SMBUS frame to search on. The default value is XXXXXXX.

SearchSearchItemTriggerABusSmbusCommand

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:COMMand command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:COMMand? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:COMMand? query and raise an AssertionError if the returned value does not match value.
Info
  • SEARCH<x> is the search identifier number.
Properties
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:COMMand:VALue command.

value property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:COMMand:VALue command.

Description
  • This command specifies the binary command code string used for SMBUS triggering if the trigger condition is command code.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:COMMand:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:COMMand:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:COMMand:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:COMMand:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:COMMand:VALue?
Info
  • SEARCH<x> is the search identifier number.
  • <QString> specifies the command value as the field within a SMBUS frame to search on. The default value is XXXXXXX.

SearchSearchItemTriggerABusSmbusCommandValue

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:COMMand:VALue command.

Description
  • This command specifies the binary command code string used for SMBUS triggering if the trigger condition is command code.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:COMMand:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:COMMand:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:COMMand:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:COMMand:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:COMMand:VALue?
Info
  • SEARCH<x> is the search identifier number.
  • <QString> specifies the command value as the field within a SMBUS frame to search on. The default value is XXXXXXX.

SearchSearchItemTriggerABusSmbusCondition

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:CONDition command.

Description
  • This command sets or queries the trigger condition for a SMBUS bus.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:CONDition? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:CONDition? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:CONDition value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:CONDition {STARt|REPEATSTARt|ADDRess|HOSTADDR|DEVICEADDR|COMMand|DATa|UDIDDATa|ERRor|STOP|IDLe}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:CONDition?
Info
  • SEARCH<x> is the search number.
  • STARt sets the search condition to start. This is the default value.
  • REPEATSTARt sets the search condition to repeat start.
  • ADDRess sets the search condition to address.
  • HOSTADDR sets the search condition to host address.
  • DEVICEADDR sets the search condition to device address.
  • COMM and sets the search condition to command.
  • DATa sets the search condition to data.
  • UDIDDATa sets the search condition to UDID data.
  • ERRor sets the search condition to error.
  • STOP sets the search condition to stop.
  • IDLe sets the search condition to idle.

SearchSearchItemTriggerABusSmbusData

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:DATa command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:DATa? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:DATa? query and raise an AssertionError if the returned value does not match value.
Info
  • SEARCH<x> is the search number.
Properties
  • .size: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:DATa:SIZe command.
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:DATa:VALue command.

size property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:DATa:SIZe command.

Description
  • This command specifies the length of the data string in bytes to be used for an SMBus trigger if the trigger condition is DATA.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:DATa:SIZe? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:DATa:SIZe? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:DATa:SIZe value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:DATa:SIZe <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:DATa:SIZe?
Info
  • SEARCH<x> is the search number.
  • <NR1> sets the data size value. The valid range is 1 to 8. The default data size is 1.

value property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:DATa:VALue command.

Description
  • This command specifies the binary data string used for SMBus triggering if the trigger condition is DATA.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:DATa:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:DATa:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:DATa:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:DATa:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:DATa:VALue?
Info
  • SEARCH<x> is the search identifier number.
  • <QString> specifies the data value as the field within a SMBUS frame to search on. The default value is XXXXXXX.

SearchSearchItemTriggerABusSmbusDataSize

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:DATa:SIZe command.

Description
  • This command specifies the length of the data string in bytes to be used for an SMBus trigger if the trigger condition is DATA.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:DATa:SIZe? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:DATa:SIZe? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:DATa:SIZe value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:DATa:SIZe <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:DATa:SIZe?
Info
  • SEARCH<x> is the search number.
  • <NR1> sets the data size value. The valid range is 1 to 8. The default data size is 1.

SearchSearchItemTriggerABusSmbusDataValue

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:DATa:VALue command.

Description
  • This command specifies the binary data string used for SMBus triggering if the trigger condition is DATA.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:DATa:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:DATa:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:DATa:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:DATa:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:DATa:VALue?
Info
  • SEARCH<x> is the search identifier number.
  • <QString> specifies the data value as the field within a SMBUS frame to search on. The default value is XXXXXXX.

SearchSearchItemTriggerABusSmbusDeviceaddr

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:DEVICEADDR command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:DEVICEADDR? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:DEVICEADDR? query and raise an AssertionError if the returned value does not match value.
Info
  • SEARCH<x> is the search identifier number.
Properties
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:DEVICEADDR:VALue command.

value property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:DEVICEADDR:VALue command.

Description
  • This command specifies the binary physical address string is used for SMBUS triggering if the trigger condition is device address.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:DEVICEADDR:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:DEVICEADDR:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:DEVICEADDR:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:DEVICEADDR:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:DEVICEADDR:VALue?
Info
  • SEARCH<x> is the search identifier number.
  • <QString> specifies the device address value as the field within a SMBUS frame to search on. The default value is XXXXXXX.

SearchSearchItemTriggerABusSmbusDeviceaddrValue

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:DEVICEADDR:VALue command.

Description
  • This command specifies the binary physical address string is used for SMBUS triggering if the trigger condition is device address.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:DEVICEADDR:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:DEVICEADDR:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:DEVICEADDR:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:DEVICEADDR:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:DEVICEADDR:VALue?
Info
  • SEARCH<x> is the search identifier number.
  • <QString> specifies the device address value as the field within a SMBUS frame to search on. The default value is XXXXXXX.

SearchSearchItemTriggerABusSmbusError

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:ERROr command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:ERROr? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:ERROr? query and raise an AssertionError if the returned value does not match value.
Info
  • SEARCH<x> is the search number.
Properties
  • .type: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:ERROr:TYPe command.

type property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:ERROr:TYPe command.

Description
  • This command sets or queries the error type for a SMBus.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:ERROr:TYPe? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:ERROr:TYPe? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:ERROr:TYPe value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:ERROr:TYPe {ANY|ACK|NACK|PEC}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:ERROr:TYPe?
Info
  • SEARCH<x> is the search number.
  • ANY sets the error search type to ANY. This is the default value.
  • ACK sets the error search type to ACK.
  • NACK sets the error search type to NACK.
  • PEC sets the error search type to PEC.

SearchSearchItemTriggerABusSmbusErrorType

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:ERROr:TYPe command.

Description
  • This command sets or queries the error type for a SMBus.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:ERROr:TYPe? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:ERROr:TYPe? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:ERROr:TYPe value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:ERROr:TYPe {ANY|ACK|NACK|PEC}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:ERROr:TYPe?
Info
  • SEARCH<x> is the search number.
  • ANY sets the error search type to ANY. This is the default value.
  • ACK sets the error search type to ACK.
  • NACK sets the error search type to NACK.
  • PEC sets the error search type to PEC.

SearchSearchItemTriggerABusSmbusFieldbyte

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:FIELDBYTe command.

Description
  • This command sets or queries the field byte for a SMBUS bus if trigger condition is UDID data.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:FIELDBYTe? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:FIELDBYTe? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:FIELDBYTe value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:FIELDBYTe {ONE|TWO|FOUR}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:FIELDBYTe?
Info
  • SEARCH<x> is the search number.
  • ONE sets the field byte size to 8 bits. This is the default value.
  • TWO sets the field byte size to 16 bits.
  • FOUR sets the field byte size to 32 bits.

SearchSearchItemTriggerABusSmbusUdiddata

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:UDIDDATa command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:UDIDDATa? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:UDIDDATa? query and raise an AssertionError if the returned value does not match value.
Info
  • SEARCH<x> is the search identifier number.
Properties
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:UDIDDATa:VALue command.

value property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:UDIDDATa:VALue command.

Description
  • This command specifies the binary data string used for SMBUS triggering if the trigger condition is UDID data.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:UDIDDATa:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:UDIDDATa:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:UDIDDATa:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:UDIDDATa:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:UDIDDATa:VALue?
Info
  • SEARCH<x> is the search identifier number.
  • <QString> specifies the UDID data value as the field within a SMBUS frame to search on. The default value is XXXXXXXX.

SearchSearchItemTriggerABusSmbusUdiddataValue

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:UDIDDATa:VALue command.

Description
  • This command specifies the binary data string used for SMBUS triggering if the trigger condition is UDID data.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:UDIDDATa:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:UDIDDATa:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:UDIDDATa:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:UDIDDATa:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:UDIDDATa:VALue?
Info
  • SEARCH<x> is the search identifier number.
  • <QString> specifies the UDID data value as the field within a SMBUS frame to search on. The default value is XXXXXXXX.

SearchSearchItemTriggerABusSource

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:SOUrce command.

Description
  • This command sets or queries the bus source for the bus search to determine where to place a mark. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SOUrce? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SOUrce? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SOUrce value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SOUrce B<x>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SOUrce?
Info
  • B<x> specifies the bus source as a bus number from B0 to B16.

SearchSearchItemTriggerABusSpacewire

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:SPACEWIRe command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SPACEWIRe? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SPACEWIRe? query and raise an AssertionError if the returned value does not match value.
Info
  • SEARCH<x> is the search number.
Properties
  • .condition: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SPACEWIRe:CONDition command.
  • .controlchartype: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SPACEWIRe:CONTROLCHARTYPe command.
  • .controlcodetype: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SPACEWIRe:CONTROLCODETYPe command.
  • .data: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SPACEWIRe:DATa command tree.
  • .errortype: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SPACEWIRe:ERRORTYPe command.
  • .timecode: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SPACEWIRe:TIMECode command tree.

condition property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:SPACEWIRe:CONDition command.

Description
  • This command sets or queries the field or condition for which to search on a SpaceWire bus.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SPACEWIRe:CONDition? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SPACEWIRe:CONDition? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SPACEWIRe:CONDition value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SPACEWIRe:CONDition {SYNC|DATa|ERRors|CONTROLCODe|CONTROLCHAR}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SPACEWIRe:CONDition?
Info
  • SEARCH<x> is the search number.
  • SYNC sets the search condition to Synchronization.
  • DATa sets the search condition to Data Characters.
  • ERRors sets the search condition to SpaceWire Bus Decode Errors.
  • CONTROLCODe sets the search condition to control code.
  • CONTROLCHAR sets the search condition to control character.

controlchartype property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:SPACEWIRe:CONTROLCHARTYPe command.

Description
  • This command sets or queries the control character type to use when searching on a SpaceWire bus signal.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SPACEWIRe:CONTROLCHARTYPe? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SPACEWIRe:CONTROLCHARTYPe? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SPACEWIRe:CONTROLCHARTYPe value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SPACEWIRe:CONTROLCHARTYPe {FCT|ESC|ENDOFPACKet}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SPACEWIRe:CONTROLCHARTYPe?
Info
  • SEARCH<x> is the search number.
  • FCT sets the control character type to Flow Control Token.
  • ESC sets the control character type to Escape.
  • ENDOFPACKet sets the control character type to End of Packet.

controlcodetype property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:SPACEWIRe:CONTROLCODETYPe command.

Description
  • This command sets or queries the control code type to use when searching on a SpaceWire bus signal.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SPACEWIRe:CONTROLCODETYPe? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SPACEWIRe:CONTROLCODETYPe? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SPACEWIRe:CONTROLCODETYPe value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SPACEWIRe:CONTROLCODETYPe {NULL|TIMECODe}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SPACEWIRe:CONTROLCODETYPe?
Info
  • SEARCH<x> is the search number.
  • NULL sets the control code type to Null code.
  • TIMECODe sets the control code type to Time code (only varying part of Time code [6 bits] is considered for search).

data property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:SPACEWIRe:DATa command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SPACEWIRe:DATa? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SPACEWIRe:DATa? query and raise an AssertionError if the returned value does not match value.
Info
  • SEARCH<x> is the search number.
Sub-properties
  • .size: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SPACEWIRe:DATa:SIZe command.
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SPACEWIRe:DATa:VALue command.

errortype property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:SPACEWIRe:ERRORTYPe command.

Description
  • This command sets or queries the error type for which to search on the SpaceWire bus signal.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SPACEWIRe:ERRORTYPe? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SPACEWIRe:ERRORTYPe? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SPACEWIRe:ERRORTYPe value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SPACEWIRe:ERRORTYPe {EEP|ESC|PARity}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SPACEWIRe:ERRORTYPe?
Info
  • SEARCH<x> is the search number.
  • EEP sets the error search type to Error end of packet.
  • ESC sets the error search type to Escape error.
  • PARity sets the error search type to Parity error.

timecode property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:SPACEWIRe:TIMECode command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SPACEWIRe:TIMECode? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SPACEWIRe:TIMECode? query and raise an AssertionError if the returned value does not match value.
Info
  • SEARCH<x> is the search number.
Sub-properties
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SPACEWIRe:TIMECode:VALue command.

SearchSearchItemTriggerABusSpacewireCondition

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:SPACEWIRe:CONDition command.

Description
  • This command sets or queries the field or condition for which to search on a SpaceWire bus.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SPACEWIRe:CONDition? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SPACEWIRe:CONDition? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SPACEWIRe:CONDition value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SPACEWIRe:CONDition {SYNC|DATa|ERRors|CONTROLCODe|CONTROLCHAR}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SPACEWIRe:CONDition?
Info
  • SEARCH<x> is the search number.
  • SYNC sets the search condition to Synchronization.
  • DATa sets the search condition to Data Characters.
  • ERRors sets the search condition to SpaceWire Bus Decode Errors.
  • CONTROLCODe sets the search condition to control code.
  • CONTROLCHAR sets the search condition to control character.

SearchSearchItemTriggerABusSpacewireControlchartype

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:SPACEWIRe:CONTROLCHARTYPe command.

Description
  • This command sets or queries the control character type to use when searching on a SpaceWire bus signal.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SPACEWIRe:CONTROLCHARTYPe? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SPACEWIRe:CONTROLCHARTYPe? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SPACEWIRe:CONTROLCHARTYPe value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SPACEWIRe:CONTROLCHARTYPe {FCT|ESC|ENDOFPACKet}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SPACEWIRe:CONTROLCHARTYPe?
Info
  • SEARCH<x> is the search number.
  • FCT sets the control character type to Flow Control Token.
  • ESC sets the control character type to Escape.
  • ENDOFPACKet sets the control character type to End of Packet.

SearchSearchItemTriggerABusSpacewireControlcodetype

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:SPACEWIRe:CONTROLCODETYPe command.

Description
  • This command sets or queries the control code type to use when searching on a SpaceWire bus signal.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SPACEWIRe:CONTROLCODETYPe? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SPACEWIRe:CONTROLCODETYPe? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SPACEWIRe:CONTROLCODETYPe value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SPACEWIRe:CONTROLCODETYPe {NULL|TIMECODe}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SPACEWIRe:CONTROLCODETYPe?
Info
  • SEARCH<x> is the search number.
  • NULL sets the control code type to Null code.
  • TIMECODe sets the control code type to Time code (only varying part of Time code [6 bits] is considered for search).

SearchSearchItemTriggerABusSpacewireData

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:SPACEWIRe:DATa command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SPACEWIRe:DATa? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SPACEWIRe:DATa? query and raise an AssertionError if the returned value does not match value.
Info
  • SEARCH<x> is the search number.
Properties
  • .size: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SPACEWIRe:DATa:SIZe command.
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SPACEWIRe:DATa:VALue command.

size property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:SPACEWIRe:DATa:SIZe command.

Description
  • This command sets or queries the length of the data string, in bytes, to use when searching on a SpaceWire bus signal. The search condition needs to be set to Data (see Related Commands ).
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SPACEWIRe:DATa:SIZe? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SPACEWIRe:DATa:SIZe? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SPACEWIRe:DATa:SIZe value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SPACEWIRe:DATa:SIZe <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SPACEWIRe:DATa:SIZe?
Info
  • SEARCH<x> is the search number.
  • <NR1> is an integer value that specifies the number of contiguous data bytes to use when searching on the SpaceWire data field. The valid range is 1 to 10.

value property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:SPACEWIRe:DATa:VALue command.

Description
  • This command sets or queries the binary data value to be used when searching on an SpaceWire bus signal. The search condition must be set to Data (see Related Commands ).
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SPACEWIRe:DATa:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SPACEWIRe:DATa:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SPACEWIRe:DATa:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SPACEWIRe:DATa:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SPACEWIRe:DATa:VALue?
Info
  • SEARCH<x> is the search number.
  • <QString> specifies the binary data value to search for on a SpaceWire bus signal.

SearchSearchItemTriggerABusSpacewireDataSize

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:SPACEWIRe:DATa:SIZe command.

Description
  • This command sets or queries the length of the data string, in bytes, to use when searching on a SpaceWire bus signal. The search condition needs to be set to Data (see Related Commands ).
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SPACEWIRe:DATa:SIZe? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SPACEWIRe:DATa:SIZe? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SPACEWIRe:DATa:SIZe value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SPACEWIRe:DATa:SIZe <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SPACEWIRe:DATa:SIZe?
Info
  • SEARCH<x> is the search number.
  • <NR1> is an integer value that specifies the number of contiguous data bytes to use when searching on the SpaceWire data field. The valid range is 1 to 10.

SearchSearchItemTriggerABusSpacewireDataValue

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:SPACEWIRe:DATa:VALue command.

Description
  • This command sets or queries the binary data value to be used when searching on an SpaceWire bus signal. The search condition must be set to Data (see Related Commands ).
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SPACEWIRe:DATa:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SPACEWIRe:DATa:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SPACEWIRe:DATa:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SPACEWIRe:DATa:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SPACEWIRe:DATa:VALue?
Info
  • SEARCH<x> is the search number.
  • <QString> specifies the binary data value to search for on a SpaceWire bus signal.

SearchSearchItemTriggerABusSpacewireErrortype

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:SPACEWIRe:ERRORTYPe command.

Description
  • This command sets or queries the error type for which to search on the SpaceWire bus signal.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SPACEWIRe:ERRORTYPe? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SPACEWIRe:ERRORTYPe? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SPACEWIRe:ERRORTYPe value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SPACEWIRe:ERRORTYPe {EEP|ESC|PARity}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SPACEWIRe:ERRORTYPe?
Info
  • SEARCH<x> is the search number.
  • EEP sets the error search type to Error end of packet.
  • ESC sets the error search type to Escape error.
  • PARity sets the error search type to Parity error.

SearchSearchItemTriggerABusSpacewireTimecode

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:SPACEWIRe:TIMECode command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SPACEWIRe:TIMECode? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SPACEWIRe:TIMECode? query and raise an AssertionError if the returned value does not match value.
Info
  • SEARCH<x> is the search number.
Properties
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SPACEWIRe:TIMECode:VALue command.

value property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:SPACEWIRe:TIMECode:VALue command.

Description
  • This command sets or queries the binary data string used for SpaceWire search if the search condition is Time Code.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SPACEWIRe:TIMECode:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SPACEWIRe:TIMECode:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SPACEWIRe:TIMECode:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SPACEWIRe:TIMECode:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SPACEWIRe:TIMECode:VALue?
Info
  • SEARCH<x> is the search number.
  • <QString> sets the binary data value to be used when searching on an SpaceWire bus signal.

SearchSearchItemTriggerABusSpacewireTimecodeValue

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:SPACEWIRe:TIMECode:VALue command.

Description
  • This command sets or queries the binary data string used for SpaceWire search if the search condition is Time Code.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SPACEWIRe:TIMECode:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SPACEWIRe:TIMECode:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SPACEWIRe:TIMECode:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SPACEWIRe:TIMECode:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SPACEWIRe:TIMECode:VALue?
Info
  • SEARCH<x> is the search number.
  • <QString> sets the binary data value to be used when searching on an SpaceWire bus signal.

SearchSearchItemTriggerABusSpi

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:SPI command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SPI? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SPI? query and raise an AssertionError if the returned value does not match value.
Properties
  • .condition: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:CONDition command.
  • .data: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:DATa command tree.
  • .sourcetype: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:SOURCETYpe command.

condition property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:CONDition command.

Description
  • This command sets or queries the search condition for an SPI bus search to determine where to place a mark. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:CONDition? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:CONDition? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:CONDition value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:CONDition {DATA|SS|STARTofframe}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:CONDition?
Info
  • DATA specifies the trigger condition as Data.
  • SS specifies the trigger condition as Slave Selection.
  • STARTofframe specifies the trigger condition as start of frame.

data property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:DATa command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:DATa? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:DATa? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .size: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:DATa:SIZe command.
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:DATa:VALue command.

sourcetype property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:SOURCETYpe command.

Description
  • This command sets or queries trigger Source for SPI bus. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:SOURCETYpe? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:SOURCETYpe? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:SOURCETYpe value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:SOURCETYpe {MISo|MOSi}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:SOURCETYpe?
Info
  • MISo specifies the trigger source as MISo. The default search source type is MISo.
  • MOSi specifies the trigger source as MOSi.

SearchSearchItemTriggerABusSpiCondition

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:CONDition command.

Description
  • This command sets or queries the search condition for an SPI bus search to determine where to place a mark. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:CONDition? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:CONDition? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:CONDition value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:CONDition {DATA|SS|STARTofframe}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:CONDition?
Info
  • DATA specifies the trigger condition as Data.
  • SS specifies the trigger condition as Slave Selection.
  • STARTofframe specifies the trigger condition as start of frame.

SearchSearchItemTriggerABusSpiData

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:DATa command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:DATa? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:DATa? query and raise an AssertionError if the returned value does not match value.
Properties
  • .size: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:DATa:SIZe command.
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:DATa:VALue command.

size property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:DATa:SIZe command.

Description
  • This command sets or queries the length of the data string in bytes used for the specified SPI bus trigger search to determine where to place a mark. The search condition must be DATA. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:DATa:SIZe? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:DATa:SIZe? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:DATa:SIZe value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:DATa:SIZe <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:DATa:SIZe?
Info
  • <NR1> specifies the number of contiguous data bytes.

value property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:DATa:VALue command.

Description
  • The command sets or queries the binary data string used for an SPI bus search to determine where to place a mark. The search number is specified by x. The search condition must be DATA.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:DATa:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:DATa:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:DATa:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:DATa:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:DATa:VALue?
Info
  • <QString> specifies the data value in the specified valid format. The valid characters are 0, 1, and X for binary format; and A-F, 0-9, and X for hexadecimal format.

SearchSearchItemTriggerABusSpiDataSize

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:DATa:SIZe command.

Description
  • This command sets or queries the length of the data string in bytes used for the specified SPI bus trigger search to determine where to place a mark. The search condition must be DATA. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:DATa:SIZe? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:DATa:SIZe? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:DATa:SIZe value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:DATa:SIZe <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:DATa:SIZe?
Info
  • <NR1> specifies the number of contiguous data bytes.

SearchSearchItemTriggerABusSpiDataValue

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:DATa:VALue command.

Description
  • The command sets or queries the binary data string used for an SPI bus search to determine where to place a mark. The search number is specified by x. The search condition must be DATA.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:DATa:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:DATa:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:DATa:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:DATa:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:DATa:VALue?
Info
  • <QString> specifies the data value in the specified valid format. The valid characters are 0, 1, and X for binary format; and A-F, 0-9, and X for hexadecimal format.

SearchSearchItemTriggerABusSpiSourcetype

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:SOURCETYpe command.

Description
  • This command sets or queries trigger Source for SPI bus. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:SOURCETYpe? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:SOURCETYpe? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:SOURCETYpe value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:SOURCETYpe {MISo|MOSi}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:SOURCETYpe?
Info
  • MISo specifies the trigger source as MISo. The default search source type is MISo.
  • MOSi specifies the trigger source as MOSi.

SearchSearchItemTriggerABusSpmi

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI? query and raise an AssertionError if the returned value does not match value.
Info
  • SEARCH<x> is the search identifier number.
Properties
  • .condition: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:CONDition command.
  • .data: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:DATa command tree.
  • .masteraddress: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:MASTERADDRess command tree.
  • .noresponse: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:NORESPonse command.
  • .registeraddress: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:REGISTERADDRess command tree.
  • .slaveaddress: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:SLAVEADDRess command tree.

condition property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:CONDition command.

Description
  • This command sets or queries the search condition for an SPMI bus.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:CONDition? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:CONDition? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:CONDition value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:CONDition {SSC|RESet|SLEep|SHUTdown|WAKeup|MASTERREAd|MASTERWRIte|REGREAd|REGWRIte|DEVICEDESCMASTERREAd|DEVICEDESCSLAVEREAd|EXTREGREAd|EXTREGWRIte|LONGEXTREGREAd|LONGEXTREGWRIte|REG0WRIte|AUTHenticate|TRANSferbusownership|PARItyerror}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:CONDition?
Info
  • SEARCH<x> is the search identifier number.
  • SSC specifies searching for the Sequence Start Condition.
  • RESet specifies searching for the Reset command sequence.
  • SLEep specifies searching for the Sleep command sequnce.
  • SHUTdown specifies searching for the Shutdown command sequence.
  • WAKeup specifies searching for the Wakeup command sequence.
  • MASTERREAd specifies searching for the Master Read command sequence.
  • MASTERWRIte specifies searching for the Master Write command sequence.
  • REGREAd specifies searching for the Register Read command sequence.
  • REGWRIte specifies searching for the Register Write command sequence.
  • DEVICEDESCMASTERREAd specifies searching for the Device Descriptor Block Master Read command sequence.
  • DEVICEDESCSLAVEREAd specifies searching for the Device Descriptor Block Slave Read command sequence.
  • EXTREGREAd specifies triggering on the Extended Register Read command sequence.
  • EXTREGWRIte specifies searching for the Extended Register Write command sequence.
  • LONGEXTREGREAd specifies searching for the Extended Register Read Long command sequence.
  • LONGEXTREGWRIte specifies searching for the Extended Register Write Long command sequence.
  • REG0WRIte specifies searching for the Register 0 Write command sequence.
  • AUTHenticate specifies searching for the Authentication command sequence.
  • TRANSferbusownership specifies searching for the Transfer Bus Ownership (TBO) command sequence.
  • PARItyerror specifies searching for the parity errors.

data property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:DATa command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:DATa? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:DATa? query and raise an AssertionError if the returned value does not match value.
Info
  • SEARCH<x> is the Search identifier number.
Sub-properties
  • .size: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:DATa:SIZe command.
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:DATa:VALue command.

masteraddress property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:MASTERADDRess command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:MASTERADDRess? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:MASTERADDRess? query and raise an AssertionError if the returned value does not match value.
Info
  • SEARCH<x> is the search identifier number.
Sub-properties
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:MASTERADDRess:VALue command.

noresponse property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:NORESPonse command.

Description
  • This command sets or queries whether or not to search for No Response frames.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:NORESPonse? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:NORESPonse? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:NORESPonse value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:NORESPonse <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:NORESPonse?
Info
  • SEARCH<x> is the search identifier number.
  • <QString> is either ‘TRUE’ or ‘FALSE’ boolean value for searching on SPMI No Response frames.

registeraddress property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:REGISTERADDRess command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:REGISTERADDRess? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:REGISTERADDRess? query and raise an AssertionError if the returned value does not match value.
Info
  • SEARCH<x> is the search identifier number.
Sub-properties
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:REGISTERADDRess:VALue command.

slaveaddress property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:SLAVEADDRess command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:SLAVEADDRess? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:SLAVEADDRess? query and raise an AssertionError if the returned value does not match value.
Info
  • SEARCH<x> is the search identifier number.
Sub-properties
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:SLAVEADDRess:VALue command.

SearchSearchItemTriggerABusSpmiCondition

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:CONDition command.

Description
  • This command sets or queries the search condition for an SPMI bus.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:CONDition? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:CONDition? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:CONDition value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:CONDition {SSC|RESet|SLEep|SHUTdown|WAKeup|MASTERREAd|MASTERWRIte|REGREAd|REGWRIte|DEVICEDESCMASTERREAd|DEVICEDESCSLAVEREAd|EXTREGREAd|EXTREGWRIte|LONGEXTREGREAd|LONGEXTREGWRIte|REG0WRIte|AUTHenticate|TRANSferbusownership|PARItyerror}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:CONDition?
Info
  • SEARCH<x> is the search identifier number.
  • SSC specifies searching for the Sequence Start Condition.
  • RESet specifies searching for the Reset command sequence.
  • SLEep specifies searching for the Sleep command sequnce.
  • SHUTdown specifies searching for the Shutdown command sequence.
  • WAKeup specifies searching for the Wakeup command sequence.
  • MASTERREAd specifies searching for the Master Read command sequence.
  • MASTERWRIte specifies searching for the Master Write command sequence.
  • REGREAd specifies searching for the Register Read command sequence.
  • REGWRIte specifies searching for the Register Write command sequence.
  • DEVICEDESCMASTERREAd specifies searching for the Device Descriptor Block Master Read command sequence.
  • DEVICEDESCSLAVEREAd specifies searching for the Device Descriptor Block Slave Read command sequence.
  • EXTREGREAd specifies triggering on the Extended Register Read command sequence.
  • EXTREGWRIte specifies searching for the Extended Register Write command sequence.
  • LONGEXTREGREAd specifies searching for the Extended Register Read Long command sequence.
  • LONGEXTREGWRIte specifies searching for the Extended Register Write Long command sequence.
  • REG0WRIte specifies searching for the Register 0 Write command sequence.
  • AUTHenticate specifies searching for the Authentication command sequence.
  • TRANSferbusownership specifies searching for the Transfer Bus Ownership (TBO) command sequence.
  • PARItyerror specifies searching for the parity errors.

SearchSearchItemTriggerABusSpmiData

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:DATa command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:DATa? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:DATa? query and raise an AssertionError if the returned value does not match value.
Info
  • SEARCH<x> is the Search identifier number.
Properties
  • .size: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:DATa:SIZe command.
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:DATa:VALue command.

size property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:DATa:SIZe command.

Description
  • This command sets or queries the length of the data string, in bytes, to be used when searching on an SPMI bus signal.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:DATa:SIZe? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:DATa:SIZe? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:DATa:SIZe value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:DATa:SIZe <NR2>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:DATa:SIZe?
Info
  • SEARCH<x> is the Search identifier number.
  • <NR2> is the size of the data string in bytes.

value property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:DATa:VALue command.

Description
  • This command specifies the binary data string used for SPMI when the search condition is MASTERREAd, MASTERWRIte, REGREAd, REGWRIte, EXTREGREAd, EXTREGWRIte, LONGEXTREGREAd, LONGEXTREGWRIte, or REG0WRIte.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:DATa:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:DATa:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:DATa:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:DATa:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:DATa:VALue?
Info
  • SEARCH<x> is the search identifier number.
  • <QString> is the binary data string that identifies the data value for which to search.

SearchSearchItemTriggerABusSpmiDataSize

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:DATa:SIZe command.

Description
  • This command sets or queries the length of the data string, in bytes, to be used when searching on an SPMI bus signal.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:DATa:SIZe? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:DATa:SIZe? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:DATa:SIZe value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:DATa:SIZe <NR2>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:DATa:SIZe?
Info
  • SEARCH<x> is the Search identifier number.
  • <NR2> is the size of the data string in bytes.

SearchSearchItemTriggerABusSpmiDataValue

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:DATa:VALue command.

Description
  • This command specifies the binary data string used for SPMI when the search condition is MASTERREAd, MASTERWRIte, REGREAd, REGWRIte, EXTREGREAd, EXTREGWRIte, LONGEXTREGREAd, LONGEXTREGWRIte, or REG0WRIte.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:DATa:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:DATa:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:DATa:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:DATa:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:DATa:VALue?
Info
  • SEARCH<x> is the search identifier number.
  • <QString> is the binary data string that identifies the data value for which to search.

SearchSearchItemTriggerABusSpmiMasteraddress

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:MASTERADDRess command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:MASTERADDRess? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:MASTERADDRess? query and raise an AssertionError if the returned value does not match value.
Info
  • SEARCH<x> is the search identifier number.
Properties
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:MASTERADDRess:VALue command.

value property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:MASTERADDRess:VALue command.

Description
  • This command sets or queries the binary data string that identifies the master address used in SPMI when the search condition is MASTERREAd, MASTERWRIte, or DEVICEDESCMASTERREAd.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:MASTERADDRess:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:MASTERADDRess:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:MASTERADDRess:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:MASTERADDRess:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:MASTERADDRess:VALue?
Info
  • SEARCH<x> is the search identifier number.
  • <QString> is the binary data string that identifies the master address for which to search.

SearchSearchItemTriggerABusSpmiMasteraddressValue

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:MASTERADDRess:VALue command.

Description
  • This command sets or queries the binary data string that identifies the master address used in SPMI when the search condition is MASTERREAd, MASTERWRIte, or DEVICEDESCMASTERREAd.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:MASTERADDRess:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:MASTERADDRess:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:MASTERADDRess:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:MASTERADDRess:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:MASTERADDRess:VALue?
Info
  • SEARCH<x> is the search identifier number.
  • <QString> is the binary data string that identifies the master address for which to search.

SearchSearchItemTriggerABusSpmiNoresponse

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:NORESPonse command.

Description
  • This command sets or queries whether or not to search for No Response frames.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:NORESPonse? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:NORESPonse? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:NORESPonse value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:NORESPonse <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:NORESPonse?
Info
  • SEARCH<x> is the search identifier number.
  • <QString> is either ‘TRUE’ or ‘FALSE’ boolean value for searching on SPMI No Response frames.

SearchSearchItemTriggerABusSpmiRegisteraddress

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:REGISTERADDRess command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:REGISTERADDRess? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:REGISTERADDRess? query and raise an AssertionError if the returned value does not match value.
Info
  • SEARCH<x> is the search identifier number.
Properties
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:REGISTERADDRess:VALue command.

value property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:REGISTERADDRess:VALue command.

Description
  • This command sets or queries the binary data string that identifies the register address used in SPMI triggering if the trigger condition is MASTERREAd, MASTERWRIte, REGREAd, REGWRIte, EXTREGREAd, EXTREGWRIte, LONGEXTREGREAd, or LONGEXTREGWRIte.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:REGISTERADDRess:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:REGISTERADDRess:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:REGISTERADDRess:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:REGISTERADDRess:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:REGISTERADDRess:VALue?
Info
  • SEARCH<x> is the search identifier number.
  • X is the binary data string that identifies the register address for which to search.

SearchSearchItemTriggerABusSpmiRegisteraddressValue

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:REGISTERADDRess:VALue command.

Description
  • This command sets or queries the binary data string that identifies the register address used in SPMI triggering if the trigger condition is MASTERREAd, MASTERWRIte, REGREAd, REGWRIte, EXTREGREAd, EXTREGWRIte, LONGEXTREGREAd, or LONGEXTREGWRIte.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:REGISTERADDRess:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:REGISTERADDRess:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:REGISTERADDRess:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:REGISTERADDRess:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:REGISTERADDRess:VALue?
Info
  • SEARCH<x> is the search identifier number.
  • X is the binary data string that identifies the register address for which to search.

SearchSearchItemTriggerABusSpmiSlaveaddress

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:SLAVEADDRess command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:SLAVEADDRess? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:SLAVEADDRess? query and raise an AssertionError if the returned value does not match value.
Info
  • SEARCH<x> is the search identifier number.
Properties
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:SLAVEADDRess:VALue command.

value property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:SLAVEADDRess:VALue command.

Description
  • This command sets or queries the binary data string that identifies the slave address used in SPMI when the search condition is RESet, SLEep, SHUTdown, WAKeup, AUTHenticate, REGREAd, REGWRIte, EXTREGREAd, EXTREGWRIte, LONGEXTREGREAd, LONGEXTREGWRIte, DEVICEDESCSLAVEREAd, or REG0WRIte.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:SLAVEADDRess:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:SLAVEADDRess:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:SLAVEADDRess:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:SLAVEADDRess:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:SLAVEADDRess:VALue?
Info
  • SEARCH<x> is the search identifier number.
  • <QString> is the binary data string that identifies the slave address for which to search.

SearchSearchItemTriggerABusSpmiSlaveaddressValue

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:SLAVEADDRess:VALue command.

Description
  • This command sets or queries the binary data string that identifies the slave address used in SPMI when the search condition is RESet, SLEep, SHUTdown, WAKeup, AUTHenticate, REGREAd, REGWRIte, EXTREGREAd, EXTREGWRIte, LONGEXTREGREAd, LONGEXTREGWRIte, DEVICEDESCSLAVEREAd, or REG0WRIte.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:SLAVEADDRess:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:SLAVEADDRess:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:SLAVEADDRess:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:SLAVEADDRess:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:SLAVEADDRess:VALue?
Info
  • SEARCH<x> is the search identifier number.
  • <QString> is the binary data string that identifies the slave address for which to search.

SearchSearchItemTriggerABusSvid

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:SVID command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SVID? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SVID? query and raise an AssertionError if the returned value does not match value.
Info
  • SEARCH<x> is the search identifier number.
Properties
  • .command: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:COMMand command tree.
  • .condition: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:CONDition command.
  • .error: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:ERRor command tree.
  • .payload: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:PAYLoad command tree.
  • .slave: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:SLAVE command tree.

command property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:COMMand command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:COMMand? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:COMMand? query and raise an AssertionError if the returned value does not match value.
Info
  • SEARCH<x> is the search identifier number.
Sub-properties
  • .response: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:COMMand:RESPonse command.
  • .type: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:COMMand:TYPe command.

condition property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:CONDition command.

Description
  • This command sets or queries the trigger condition for SVID bus.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:CONDition? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:CONDition? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:CONDition value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:CONDition {STARTCONDition|SLAVEADDRess|COMMand|PAYLoad|ERRors}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:CONDition?
Info
  • SEARCH<x> is the search identifier number.
  • STARTCONDition specifies the search condition as STARTCONDition. This is the default trigger on condition.
  • SLAVEADDRess specifies the search condition as SLAVEADDRess.
  • COMMand specifies the search condition as COMMand.
  • PAYLoad specifies the search condition as PAYLoad.
  • ERRors specifies the search condition as ERRors.

error property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:ERRor command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:ERRor? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:ERRor? query and raise an AssertionError if the returned value does not match value.
Info
  • SEARCH<x> is the search identifier number.
Sub-properties
  • .type: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:ERRor:TYPe command.

payload property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:PAYLoad command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:PAYLoad? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:PAYLoad? query and raise an AssertionError if the returned value does not match value.
Info
  • SEARCH<x> is the search identifier number.
Sub-properties
  • .type: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:PAYLoad:TYPe command.
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:PAYLoad:VALue command.

slave property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:SLAVE command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:SLAVE? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:SLAVE? query and raise an AssertionError if the returned value does not match value.
Info
  • SEARCH<x> is the search identifier number.
Sub-properties
  • .address: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:SLAVE:ADDRESS command.

SearchSearchItemTriggerABusSvidCommand

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:COMMand command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:COMMand? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:COMMand? query and raise an AssertionError if the returned value does not match value.
Info
  • SEARCH<x> is the search identifier number.
Properties
  • .response: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:COMMand:RESPonse command.
  • .type: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:COMMand:TYPe command.

response property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:COMMand:RESPonse command.

Description
  • This command sets or queries the command response of the respective command type for SVID bus.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:COMMand:RESPonse? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:COMMand:RESPonse? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:COMMand:RESPonse value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:COMMand:RESPonse {GETReg|GETRegvendor|GETRegtestcfg|SETFast|SETSlow| SETDecay|SETPs|SETRegaddr|SETRegdata|REGAddrvendor|REGDatavendor|REGAddrtestconfg|REGDatatestconfg|TESTmode|SETWp|GETRegpktrecent|GETRegpktalert|GETRegpktbad|GETRegvrevent}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:COMMand:RESPonse?
Info
  • SEARCH<x> is the search identifier number.
  • GETReg specifies the search condition as GETReg. This is the default command response condition.
  • GETRegvendor specifies the search condition as GETRegvendor.
  • GETRegtestcfg specifies the search condition as GETRegtestcfg.
  • SETFast specifies the search condition as SETFast.
  • SETSlow specifies the search condition as SETSlow.
  • SETDecay specifies the search condition as SETDecay.
  • SETPs specifies the search condition as SETPs.
  • SETRegaddr specifies the search condition as SETRegaddr.
  • SETRegdata specifies the search condition as SETRegdata.
  • REGAddrvendor specifies the search condition as REGAddrvendor.
  • REGDatavendor specifies the search condition as REGDatavendor.
  • REGAddrtestconfg specifies the search condition as REGAddrtestconfg.
  • REGDatatestconfg specifies the search condition as REGDatatestconfg.
  • TESTmode specifies the search condition as TESTmode.
  • SETWp specifies the search condition as SETWp.
  • GETRegpktrecent specifies the search condition as GETRegpktrecent.
  • GETRegpktalert specifies the search condition as GETRegpktalert.
  • GETRegpktbad specifies the search condition as GETRegpktbad.
  • GETRegvrevent specifies the search condition as GETRegvrevent.

type property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:COMMand:TYPe command.

Description
  • This command sets or queries the command type for SVID bus.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:COMMand:TYPe? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:COMMand:TYPe? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:COMMand:TYPe value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:COMMand:TYPe {GET|SET|OPTional}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:COMMand:TYPe?
Info
  • SEARCH<x> is the search identifier number.
  • GET specifies the search condition as GET. This is the default command type condition.
  • SET specifies the search condition as SET.
  • OPTional specifies the search condition as OPTional.

SearchSearchItemTriggerABusSvidCommandResponse

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:COMMand:RESPonse command.

Description
  • This command sets or queries the command response of the respective command type for SVID bus.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:COMMand:RESPonse? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:COMMand:RESPonse? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:COMMand:RESPonse value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:COMMand:RESPonse {GETReg|GETRegvendor|GETRegtestcfg|SETFast|SETSlow| SETDecay|SETPs|SETRegaddr|SETRegdata|REGAddrvendor|REGDatavendor|REGAddrtestconfg|REGDatatestconfg|TESTmode|SETWp|GETRegpktrecent|GETRegpktalert|GETRegpktbad|GETRegvrevent}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:COMMand:RESPonse?
Info
  • SEARCH<x> is the search identifier number.
  • GETReg specifies the search condition as GETReg. This is the default command response condition.
  • GETRegvendor specifies the search condition as GETRegvendor.
  • GETRegtestcfg specifies the search condition as GETRegtestcfg.
  • SETFast specifies the search condition as SETFast.
  • SETSlow specifies the search condition as SETSlow.
  • SETDecay specifies the search condition as SETDecay.
  • SETPs specifies the search condition as SETPs.
  • SETRegaddr specifies the search condition as SETRegaddr.
  • SETRegdata specifies the search condition as SETRegdata.
  • REGAddrvendor specifies the search condition as REGAddrvendor.
  • REGDatavendor specifies the search condition as REGDatavendor.
  • REGAddrtestconfg specifies the search condition as REGAddrtestconfg.
  • REGDatatestconfg specifies the search condition as REGDatatestconfg.
  • TESTmode specifies the search condition as TESTmode.
  • SETWp specifies the search condition as SETWp.
  • GETRegpktrecent specifies the search condition as GETRegpktrecent.
  • GETRegpktalert specifies the search condition as GETRegpktalert.
  • GETRegpktbad specifies the search condition as GETRegpktbad.
  • GETRegvrevent specifies the search condition as GETRegvrevent.

SearchSearchItemTriggerABusSvidCommandType

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:COMMand:TYPe command.

Description
  • This command sets or queries the command type for SVID bus.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:COMMand:TYPe? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:COMMand:TYPe? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:COMMand:TYPe value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:COMMand:TYPe {GET|SET|OPTional}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:COMMand:TYPe?
Info
  • SEARCH<x> is the search identifier number.
  • GET specifies the search condition as GET. This is the default command type condition.
  • SET specifies the search condition as SET.
  • OPTional specifies the search condition as OPTional.

SearchSearchItemTriggerABusSvidCondition

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:CONDition command.

Description
  • This command sets or queries the trigger condition for SVID bus.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:CONDition? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:CONDition? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:CONDition value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:CONDition {STARTCONDition|SLAVEADDRess|COMMand|PAYLoad|ERRors}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:CONDition?
Info
  • SEARCH<x> is the search identifier number.
  • STARTCONDition specifies the search condition as STARTCONDition. This is the default trigger on condition.
  • SLAVEADDRess specifies the search condition as SLAVEADDRess.
  • COMMand specifies the search condition as COMMand.
  • PAYLoad specifies the search condition as PAYLoad.
  • ERRors specifies the search condition as ERRors.

SearchSearchItemTriggerABusSvidError

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:ERRor command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:ERRor? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:ERRor? query and raise an AssertionError if the returned value does not match value.
Info
  • SEARCH<x> is the search identifier number.
Properties
  • .type: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:ERRor:TYPe command.

type property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:ERRor:TYPe command.

Description
  • This command sets or queries the error type for SVID bus.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:ERRor:TYPe? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:ERRor:TYPe? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:ERRor:TYPe value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:ERRor:TYPe {ANY|NACK|REJect|MIXed|PARity}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:ERRor:TYPe?
Info
  • SEARCH<x> is the search identifier number.
  • ANY specifies the search condition as ANY. This is the default error type condition.
  • NACK specifies the search condition as NACK.
  • REJect specifies the search condition as REJect.
  • MIXed specifies the search condition as MIXed.
  • PARity specifies the search condition as PARit.

SearchSearchItemTriggerABusSvidErrorType

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:ERRor:TYPe command.

Description
  • This command sets or queries the error type for SVID bus.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:ERRor:TYPe? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:ERRor:TYPe? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:ERRor:TYPe value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:ERRor:TYPe {ANY|NACK|REJect|MIXed|PARity}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:ERRor:TYPe?
Info
  • SEARCH<x> is the search identifier number.
  • ANY specifies the search condition as ANY. This is the default error type condition.
  • NACK specifies the search condition as NACK.
  • REJect specifies the search condition as REJect.
  • MIXed specifies the search condition as MIXed.
  • PARity specifies the search condition as PARit.

SearchSearchItemTriggerABusSvidPayload

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:PAYLoad command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:PAYLoad? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:PAYLoad? query and raise an AssertionError if the returned value does not match value.
Info
  • SEARCH<x> is the search identifier number.
Properties
  • .type: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:PAYLoad:TYPe command.
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:PAYLoad:VALue command.

type property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:PAYLoad:TYPe command.

Description
  • This command sets or queries the payload type for SVID bus.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:PAYLoad:TYPe? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:PAYLoad:TYPe? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:PAYLoad:TYPe value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:PAYLoad:TYPe {MASTer|SLAVe|EITHer}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:PAYLoad:TYPe?
Info
  • SEARCH<x> is the search identifier number.
  • MASTer specifies the search condition as MASTer. This is the default payload type condition.
  • SLAVe specifies the search condition as SLAVe.
  • EITHer specifies the search condition as EITHer.

value property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:PAYLoad:VALue command.

Description
  • This command sets or queries the payload value to be used when search is on SVID bus.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:PAYLoad:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:PAYLoad:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:PAYLoad:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:PAYLoad:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:PAYLoad:VALue?
Info
  • SEARCH<x> is the search identifier number.
  • <QString> specifies the data value in the specified valid format. The valid characters are 0, 1, and X for binary; for hexadecimal; and symbolic).

SearchSearchItemTriggerABusSvidPayloadType

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:PAYLoad:TYPe command.

Description
  • This command sets or queries the payload type for SVID bus.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:PAYLoad:TYPe? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:PAYLoad:TYPe? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:PAYLoad:TYPe value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:PAYLoad:TYPe {MASTer|SLAVe|EITHer}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:PAYLoad:TYPe?
Info
  • SEARCH<x> is the search identifier number.
  • MASTer specifies the search condition as MASTer. This is the default payload type condition.
  • SLAVe specifies the search condition as SLAVe.
  • EITHer specifies the search condition as EITHer.

SearchSearchItemTriggerABusSvidPayloadValue

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:PAYLoad:VALue command.

Description
  • This command sets or queries the payload value to be used when search is on SVID bus.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:PAYLoad:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:PAYLoad:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:PAYLoad:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:PAYLoad:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:PAYLoad:VALue?
Info
  • SEARCH<x> is the search identifier number.
  • <QString> specifies the data value in the specified valid format. The valid characters are 0, 1, and X for binary; for hexadecimal; and symbolic).

SearchSearchItemTriggerABusSvidSlave

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:SLAVE command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:SLAVE? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:SLAVE? query and raise an AssertionError if the returned value does not match value.
Info
  • SEARCH<x> is the search identifier number.
Properties
  • .address: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:SLAVE:ADDRESS command.

address property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:SLAVE:ADDRESS command.

Description
  • This command sets or queries the slave address to be used when search is on SVID bus.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:SLAVE:ADDRESS? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:SLAVE:ADDRESS? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:SLAVE:ADDRESS value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:SLAVE:ADDRESS <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:SLAVE:ADDRESS?
Info
  • SEARCH<x> is the search identifier number.
  • <QString> specifies the data value in the specified valid format. The valid characters are 0, 1, and X for binary; for hexadecimal; and symbolic). The default address is XXXX.

SearchSearchItemTriggerABusSvidSlaveAddress

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:SLAVE:ADDRESS command.

Description
  • This command sets or queries the slave address to be used when search is on SVID bus.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:SLAVE:ADDRESS? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:SLAVE:ADDRESS? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:SLAVE:ADDRESS value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:SLAVE:ADDRESS <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:SLAVE:ADDRESS?
Info
  • SEARCH<x> is the search identifier number.
  • <QString> specifies the data value in the specified valid format. The valid characters are 0, 1, and X for binary; for hexadecimal; and symbolic). The default address is XXXX.

SearchSearchItemTriggerABusUsb

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB? query and raise an AssertionError if the returned value does not match value.
Properties
  • .address: The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ADDress command tree.
  • .character: The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:CHARacter command.
  • .cheader: The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:CHEADer command.
  • .compliance: The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:COMPliance command.
  • .condition: The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:CONDition command.
  • .crctype: The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:CRCTYPe command.
  • .custom: The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:CUSTom command tree.
  • .data: The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa command tree.
  • .endpoint: The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ENDPoint command tree.
  • .err8b10b: The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ERR8B10B command tree.
  • .errtype: The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ERRTYPE command.
  • .handshaketype: The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:HANDSHAKEType command.
  • .headertype: The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:HEADERTYPe command.
  • .keypadtype: The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:KEYPADTYPe command.
  • .lane: The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:LANE command.
  • .ordered: The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ORDered command tree.
  • .packettype: The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:PACKETTYPe command.
  • .packet: The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:PACKet command tree.
  • .sofframenumber: The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SOFFRAMENUMber command.
  • .specialtype: The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPECIALType command.
  • .split: The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT command tree.
  • .tokentype: The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:TOKENType command.
  • .usb3g2character: The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:USB3G2CHARacter command.

address property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ADDress command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ADDress? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ADDress? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .hivalue: The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ADDress:HIVALue command.
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ADDress:VALue command.

character property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:CHARacter command.

Description
  • This command sets or queries the trigger condition for an USB bus on specific control symbol. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:CHARacter? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:CHARacter? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:CHARacter value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:CHARacter {COM|EDB|END|EPF|SDP|SHP|SKP|SLC|SUB|Any}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:CHARacter?
Info
  • COM specifies the control symbol as Comma (K28.5).
  • EDB specifies the control symbol as End Bad (K28.3).
  • END specifies the control symbol as End (K29.7).
  • EPF specifies the control symbol as End Packet Framing (K23.7).
  • SDP specifies the control symbol as Start Data Packet (K28.2).
  • SHP specifies the control symbol as Start Header Packet (K27.7).
  • SKP specifies the control symbol as Skip (K28.1).
  • SLC specifies the control symbol as Start Link Command (K30.7).
  • SUB specifies the control symbol as Secode Error Substitution (K28.4).
  • Any specifies any control symbol.

cheader property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:CHEADer command.

Description
  • This command sets or queries the Sync header type for Custom pattern to trigger on a USB 3.x Gen 2. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:CHEADer? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:CHEADer? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:CHEADer value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:CHEADer {CONTRol|DATa|EITHer}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:CHEADer?
Info
  • CONTRol specifies the search condition as control.
  • DATa specifies the search condition as data.
  • EITHER specifies the search condition as either.

compliance property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:COMPliance command.

Description
  • This command sets or queries the trigger condition for an USB bus on Compliance Pattern sequences. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:COMPliance? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:COMPliance? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:COMPliance value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:COMPliance {CP1|CP3|CP4|CP56|CP78}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:COMPliance?
Info
  • CP1 specifies the compliance pattern sequence as CP1.
  • CP3 specifies the compliance pattern sequence as CP3.
  • CP4 specifies the compliance pattern sequence as CP4.
  • CP56 specifies the compliance pattern sequence as CP5 or CP6.
  • CP78 specifies the compliance pattern sequence as CP7 or CP8.

condition property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:CONDition command.

Description
  • This command sets or queries the search condition for a USB bus search to determine where to place a mark. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:CONDition? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:CONDition? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:CONDition value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:CONDition {COMPATTern|CONTROLCH|CUSTom|DATAPacket|EOP|ERRor|HANDSHAKEPacket|OSET|PACKet|RESET|RESUME|SPECIALPacket|SUSPEND|SYNC|TOKENPacket}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:CONDition?
Info
  • COMPATTern specifies the search condition as Compliance Pattern. Packet view must be Off. Requires option SRUSB3. Packet view must be Off.
  • CONTROLCH specifies the search condition as Control Character. Requires option SRUSB3.
  • CUSTom specifies the search condition as Custom symbol search. Packet viewmust be Off. Requires option SRUSB3. Packet view must be Off.
  • DATAPacket specifies the search condition as Data Packet.
  • EOP specifies the search condition as End of Packet.
  • ERRor specifies the search condition as Error.
  • HANDSHAKEPacket specifies the search condition as Handshake Packet.
  • OSET specifies the search condition as Ordered Set. Requires option SRUSB3.
  • PACKet specifies the search condition as Packets. Packet view must be On. Requires option SRUSB3. Packet view must be On.
  • RESET specifies the search condition as Reset.
  • RESUME specifies the search condition as Resume.
  • SPECIALPacket specifies the search condition as Special Packet.
  • SUSPEND specifies the search condition as Suspend.
  • SYNC specifies the search condition as Sync.
  • TOKENPacket specifies the search condition as Token (Address) Packet.

crctype property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:CRCTYPe command.

Description
  • This command specifies the USB3 CRC trigger type to be valid on a CRC5, CRC16 or CRC32. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:CRCTYPe? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:CRCTYPe? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:CRCTYPe value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:CRCTYPe {CRC5|CRC16|CRC32}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:CRCTYPe?
Info
  • CRC5 specifies CRC error type to be CRC5.
  • CRC16 specifies CRC error type to be CRC16.
  • CRC32 specifies CRC error type to be CRC32.

custom property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:CUSTom command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:CUSTom? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:CUSTom? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .characters: The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:CUSTom:CHARacters command.
  • .hexvalue: The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:CUSTom:HEXVALue command.
  • .numsymbols: The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:CUSTom:NUMSYMbols command.

data property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .hivalue: The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:HIVALue command.
  • .offset: The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:OFFSet command.
  • .qualifier: The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:QUALifier command.
  • .size: The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:SIZe command.
  • .type: The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:TYPe command.
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:VALue command.

endpoint property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ENDPoint command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ENDPoint? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ENDPoint? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ENDPoint:VALue command.

err8b10b property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ERR8B10B command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ERR8B10B? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ERR8B10B? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .type: The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ERR8B10B:TYPe command.

errtype property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ERRTYPE command.

Description
  • This command sets or queries the error type for a USB bus search to determine where to place a mark. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ERRTYPE? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ERRTYPE? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ERRTYPE value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ERRTYPE {BITSTUFFing|CRC5|CRC16|CRCTYPes|ERR8B10B|PID}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ERRTYPE?
Info
  • BITSTUFFing specifies the error type as Bit Stuffing.
  • CRC5 specifies the error type as Token CRC5 (Cyclic Redundancy Check 5).
  • CRC16 specifies the error type as Data CRC16 (Cyclic Redundancy Check 16).
  • CRCTYPes specifies the error type as USB3 CRC errors. Requires option SRUSB3.
  • ERR8B10B specifies error type as 8b10b encoding errors. Requires option SRUSB3.
  • PID specifies the error type as PID Check Bits.

handshaketype property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:HANDSHAKEType command.

Description
  • This command sets or queries the handshake type for the specified USB bus trigger search to determine where to place a mark. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:HANDSHAKEType? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:HANDSHAKEType? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:HANDSHAKEType value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:HANDSHAKEType {ACK|ANY|NAK|NYET|STALL}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:HANDSHAKEType?
Info
  • ACK specifies the handshake type as Acknowledgement (positive) (XX10).
  • ANY specifies the handshake type as Any (0010).
  • NAK specifies the handshake type as Negative Acknowledgment (1010).
  • NYET specifies the handshake type as No response Yet (0110).
  • STALL specifies the handshake type as Stall (endpoint is halted or control pipe request not supported) (1110).

headertype property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:HEADERTYPe command.

Description
  • This command sets or queries the Sync header type to trigger on. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:HEADERTYPe? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:HEADERTYPe? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:HEADERTYPe value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:HEADERTYPe {CONTRol|DATa|INVALid}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:HEADERTYPe?
Info
  • CONTRol specifies the search condition as control.
  • DATa specifies the search condition as data.
  • INVALid specifies the search condition as invalid.

keypadtype property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:KEYPADTYPe command.

Description
  • This command sets or queries whether the keypad is toggled to KCode or Data. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:KEYPADTYPe? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:KEYPADTYPe? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:KEYPADTYPe value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:KEYPADTYPe {KCODe|DATa}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:KEYPADTYPe?
Info
  • KCODe sets the Symbol toggle to K-Code and Character keypad is loaded.
  • DATa sets the Symbol toggle to Data and hex keypad is loaded.

lane property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:LANE command.

Description
  • This command specifies the lane to search on for USB 3.2 Gen1x2 and Gen2x2. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:LANE? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:LANE? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:LANE value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:LANE {USB32G1|USB32G2}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:LANE?
Info
  • USB32G1 specifies the search condition as USB 3.2 Gen 1x2.
  • USB32G2 specifies the search condition as USB 3.2 Gen 2x2.

ordered property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ORDered command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ORDered? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ORDered? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .set: The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ORDered:SET command.

packet property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:PACKet command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:PACKet? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:PACKet? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .typeoflmp: The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:PACKet:TYPEOFLMP command.
  • .typeoftp: The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:PACKet:TYPEOFTP command.

packettype property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:PACKETTYPe command.

Description
  • This command sets or queries the trigger condition for an USB bus on specific packet. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:PACKETTYPe? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:PACKETTYPe? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:PACKETTYPe value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:PACKETTYPe {LMP|TP|DP|ITP|ANY}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:PACKETTYPe?
Info
  • LMP specifies the packet type as link management packet.
  • TP specifies the packet type as Transaction packet.
  • DP specifies the packet type as Data Packet.
  • ITP specifies the packet type as Isochronous timestamp packet.
  • ANY specifies the packet type as any type of packets.

sofframenumber property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SOFFRAMENUMber command.

Description
  • This command sets or queries the frame number string to use for the Start of Frame for the specified USB bus trigger search to determine where to place a mark. The search number is specified by x. The search condition must be set to TOKEN.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SOFFRAMENUMber? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SOFFRAMENUMber? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SOFFRAMENUMber value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SOFFRAMENUMber <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SOFFRAMENUMber?
Info
  • <QString> specifies the frame number string for the Start of Frame in a valid format (binary, hexadecimal, or symbolic).

specialtype property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPECIALType command.

Description
  • This command sets or queries the USB search type for the specified USB bus trigger search to determine where to place a mark. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPECIALType? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPECIALType? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPECIALType value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPECIALType {ANY|ERROr|PING|PREamble|RESERVed|SPLit}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPECIALType?
Info
  • ANY specifies the PID value as Any (XX00).
  • ERROr specifies the PID value as ERR (1100).
  • PING specifies the PID value as PING (0100).
  • PREamble specifies the PID value as PRE (1100).
  • RESERVed specifies the PID value as Reserved (0000).
  • SPLit specifies the PID value as Split (1000).

split property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .et: The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:ET command tree.
  • .hub: The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:HUB command tree.
  • .port: The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:PORT command tree.
  • .sc: The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:SC command tree.
  • .se: The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:SE command tree.

tokentype property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:TOKENType command.

Description
  • This command sets or queries the token type used to search a USB bus signal. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:TOKENType? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:TOKENType? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:TOKENType value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:TOKENType {ANY|IN|OUT|SETUP|SOF}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:TOKENType?
Info
  • ANY specifies the token type as Any (XX01).
  • IN specifies the token type as IN (1001).
  • OUT specifies the token type as OUT (0001).
  • SETUP specifies the token type as SETUP (1101).
  • SOF specifies the token type as Start Of Frame (0101).

usb3g2character property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:USB3G2CHARacter command.

Description
  • This command sets or queries the trigger condition for a USB bus on specific Control symbol. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:USB3G2CHARacter? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:USB3G2CHARacter? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:USB3G2CHARacter value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:USB3G2CHARacter {COM|EDB|END|EPF|SDP|SHP|SKP|SLC|SUB|Any}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:USB3G2CHARacter?
Info
  • COM specifies the control symbol as Comma (K28.5).
  • EDB specifies the control symbol as End Bad (K28.3).
  • END specifies the control symbol as End (K29.7).
  • EPF specifies the control symbol as End Packet Framing (K23.7).
  • SDP specifies the control symbol as Start Data Packet (K28.2).
  • SHP specifies the control symbol as Start Header Packet (K27.7).
  • SKP specifies the control symbol as Skip (K28.1).
  • SLC specifies the control symbol as Start Link Command (K30.7).
  • SUB specifies the control symbol as Secode Error Substitution (K28.4).
  • Any specifies any control symbol.

SearchSearchItemTriggerABusUsbAddress

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ADDress command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ADDress? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ADDress? query and raise an AssertionError if the returned value does not match value.
Properties
  • .hivalue: The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ADDress:HIVALue command.
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ADDress:VALue command.

hivalue property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ADDress:HIVALue command.

Description
  • This command sets or queries the high binary address value used when searching on a USB bus signal to determine where to place a mark. The search number is specified by x. The search condition must be set to TOKEN. The VALue and HIVALue set a range that the INrange and OUTrange qualifiers use to decide when to trigger. For example, if the QUALIFER is set to INrange, and the address is within the range set by VALue and HIVALue, then a trigger can be generated.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ADDress:HIVALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ADDress:HIVALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ADDress:HIVALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ADDress:HIVALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ADDress:HIVALue?
Info
  • <QString> specifies the data value in the specified valid format. The valid characters are 0, 1, and X for binary; for hexadecimal; and symbolic).

value property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ADDress:VALue command.

Description
  • This command sets or queries the binary address value used for a USB bus search to determine where to place a mark. The search number is specified by x. The search condition must be set to TOKEN.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ADDress:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ADDress:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ADDress:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ADDress:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ADDress:VALue?
Info
  • <QString> specifies the data value in the specified valid format. Valid characters are 0, 1, and X for binary; A-F, 0-9 and X for hexadecimal; and for symbolic.

SearchSearchItemTriggerABusUsbAddressHivalue

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ADDress:HIVALue command.

Description
  • This command sets or queries the high binary address value used when searching on a USB bus signal to determine where to place a mark. The search number is specified by x. The search condition must be set to TOKEN. The VALue and HIVALue set a range that the INrange and OUTrange qualifiers use to decide when to trigger. For example, if the QUALIFER is set to INrange, and the address is within the range set by VALue and HIVALue, then a trigger can be generated.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ADDress:HIVALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ADDress:HIVALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ADDress:HIVALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ADDress:HIVALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ADDress:HIVALue?
Info
  • <QString> specifies the data value in the specified valid format. The valid characters are 0, 1, and X for binary; for hexadecimal; and symbolic).

SearchSearchItemTriggerABusUsbAddressValue

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ADDress:VALue command.

Description
  • This command sets or queries the binary address value used for a USB bus search to determine where to place a mark. The search number is specified by x. The search condition must be set to TOKEN.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ADDress:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ADDress:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ADDress:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ADDress:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ADDress:VALue?
Info
  • <QString> specifies the data value in the specified valid format. Valid characters are 0, 1, and X for binary; A-F, 0-9 and X for hexadecimal; and for symbolic.

SearchSearchItemTriggerABusUsbCharacter

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:CHARacter command.

Description
  • This command sets or queries the trigger condition for an USB bus on specific control symbol. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:CHARacter? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:CHARacter? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:CHARacter value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:CHARacter {COM|EDB|END|EPF|SDP|SHP|SKP|SLC|SUB|Any}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:CHARacter?
Info
  • COM specifies the control symbol as Comma (K28.5).
  • EDB specifies the control symbol as End Bad (K28.3).
  • END specifies the control symbol as End (K29.7).
  • EPF specifies the control symbol as End Packet Framing (K23.7).
  • SDP specifies the control symbol as Start Data Packet (K28.2).
  • SHP specifies the control symbol as Start Header Packet (K27.7).
  • SKP specifies the control symbol as Skip (K28.1).
  • SLC specifies the control symbol as Start Link Command (K30.7).
  • SUB specifies the control symbol as Secode Error Substitution (K28.4).
  • Any specifies any control symbol.

SearchSearchItemTriggerABusUsbCheader

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:CHEADer command.

Description
  • This command sets or queries the Sync header type for Custom pattern to trigger on a USB 3.x Gen 2. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:CHEADer? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:CHEADer? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:CHEADer value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:CHEADer {CONTRol|DATa|EITHer}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:CHEADer?
Info
  • CONTRol specifies the search condition as control.
  • DATa specifies the search condition as data.
  • EITHER specifies the search condition as either.

SearchSearchItemTriggerABusUsbCompliance

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:COMPliance command.

Description
  • This command sets or queries the trigger condition for an USB bus on Compliance Pattern sequences. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:COMPliance? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:COMPliance? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:COMPliance value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:COMPliance {CP1|CP3|CP4|CP56|CP78}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:COMPliance?
Info
  • CP1 specifies the compliance pattern sequence as CP1.
  • CP3 specifies the compliance pattern sequence as CP3.
  • CP4 specifies the compliance pattern sequence as CP4.
  • CP56 specifies the compliance pattern sequence as CP5 or CP6.
  • CP78 specifies the compliance pattern sequence as CP7 or CP8.

SearchSearchItemTriggerABusUsbCondition

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:CONDition command.

Description
  • This command sets or queries the search condition for a USB bus search to determine where to place a mark. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:CONDition? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:CONDition? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:CONDition value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:CONDition {COMPATTern|CONTROLCH|CUSTom|DATAPacket|EOP|ERRor|HANDSHAKEPacket|OSET|PACKet|RESET|RESUME|SPECIALPacket|SUSPEND|SYNC|TOKENPacket}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:CONDition?
Info
  • COMPATTern specifies the search condition as Compliance Pattern. Packet view must be Off. Requires option SRUSB3. Packet view must be Off.
  • CONTROLCH specifies the search condition as Control Character. Requires option SRUSB3.
  • CUSTom specifies the search condition as Custom symbol search. Packet viewmust be Off. Requires option SRUSB3. Packet view must be Off.
  • DATAPacket specifies the search condition as Data Packet.
  • EOP specifies the search condition as End of Packet.
  • ERRor specifies the search condition as Error.
  • HANDSHAKEPacket specifies the search condition as Handshake Packet.
  • OSET specifies the search condition as Ordered Set. Requires option SRUSB3.
  • PACKet specifies the search condition as Packets. Packet view must be On. Requires option SRUSB3. Packet view must be On.
  • RESET specifies the search condition as Reset.
  • RESUME specifies the search condition as Resume.
  • SPECIALPacket specifies the search condition as Special Packet.
  • SUSPEND specifies the search condition as Suspend.
  • SYNC specifies the search condition as Sync.
  • TOKENPacket specifies the search condition as Token (Address) Packet.

SearchSearchItemTriggerABusUsbCrctype

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:CRCTYPe command.

Description
  • This command specifies the USB3 CRC trigger type to be valid on a CRC5, CRC16 or CRC32. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:CRCTYPe? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:CRCTYPe? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:CRCTYPe value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:CRCTYPe {CRC5|CRC16|CRC32}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:CRCTYPe?
Info
  • CRC5 specifies CRC error type to be CRC5.
  • CRC16 specifies CRC error type to be CRC16.
  • CRC32 specifies CRC error type to be CRC32.

SearchSearchItemTriggerABusUsbCustom

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:CUSTom command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:CUSTom? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:CUSTom? query and raise an AssertionError if the returned value does not match value.
Properties
  • .characters: The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:CUSTom:CHARacters command.
  • .hexvalue: The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:CUSTom:HEXVALue command.
  • .numsymbols: The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:CUSTom:NUMSYMbols command.

characters property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:CUSTom:CHARacters command.

Description
  • This command sets or queries the pattern of characters in the custom pattern. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:CUSTom:CHARacters? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:CUSTom:CHARacters? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:CUSTom:CHARacters value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:CUSTom:CHARacters <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:CUSTom:CHARacters?
Info
  • <QString> specifies the data value in the specified valid format (binary, hexadecimal, or symbolic). The valid characters for binary are 0, 1, and X. The value must be a series of K-codes or XXX.X. The default value is K28.5. A minimum of 1 character and a maximum of 16 characters.

hexvalue property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:CUSTom:HEXVALue command.

Description
  • This command sets or queries the pattern of Hex descrambled data values in the custom pattern. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:CUSTom:HEXVALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:CUSTom:HEXVALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:CUSTom:HEXVALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:CUSTom:HEXVALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:CUSTom:HEXVALue?
Info
  • <QString> specifies the data value in the specified valid format (binary, hexadecimal, or symbolic). The valid characters for binary are 0, 1, and X. The value must be a series of hex values. The default value is BC. A minimum of 1 bit values. A maximum of 16 bit values.

numsymbols property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:CUSTom:NUMSYMbols command.

Description
  • This command sets or queries the number of symbols in the custom pattern. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:CUSTom:NUMSYMbols? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:CUSTom:NUMSYMbols? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:CUSTom:NUMSYMbols value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:CUSTom:NUMSYMbols <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:CUSTom:NUMSYMbols?
Info
  • <NR1> specifies the number of symbols for the custom pattern. The default value is 1. A minimum of 1 character and a maximum of 16 characters.

SearchSearchItemTriggerABusUsbCustomCharacters

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:CUSTom:CHARacters command.

Description
  • This command sets or queries the pattern of characters in the custom pattern. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:CUSTom:CHARacters? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:CUSTom:CHARacters? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:CUSTom:CHARacters value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:CUSTom:CHARacters <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:CUSTom:CHARacters?
Info
  • <QString> specifies the data value in the specified valid format (binary, hexadecimal, or symbolic). The valid characters for binary are 0, 1, and X. The value must be a series of K-codes or XXX.X. The default value is K28.5. A minimum of 1 character and a maximum of 16 characters.

SearchSearchItemTriggerABusUsbCustomHexvalue

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:CUSTom:HEXVALue command.

Description
  • This command sets or queries the pattern of Hex descrambled data values in the custom pattern. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:CUSTom:HEXVALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:CUSTom:HEXVALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:CUSTom:HEXVALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:CUSTom:HEXVALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:CUSTom:HEXVALue?
Info
  • <QString> specifies the data value in the specified valid format (binary, hexadecimal, or symbolic). The valid characters for binary are 0, 1, and X. The value must be a series of hex values. The default value is BC. A minimum of 1 bit values. A maximum of 16 bit values.

SearchSearchItemTriggerABusUsbCustomNumsymbols

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:CUSTom:NUMSYMbols command.

Description
  • This command sets or queries the number of symbols in the custom pattern. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:CUSTom:NUMSYMbols? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:CUSTom:NUMSYMbols? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:CUSTom:NUMSYMbols value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:CUSTom:NUMSYMbols <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:CUSTom:NUMSYMbols?
Info
  • <NR1> specifies the number of symbols for the custom pattern. The default value is 1. A minimum of 1 character and a maximum of 16 characters.

SearchSearchItemTriggerABusUsbData

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa? query and raise an AssertionError if the returned value does not match value.
Properties
  • .hivalue: The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:HIVALue command.
  • .offset: The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:OFFSet command.
  • .qualifier: The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:QUALifier command.
  • .size: The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:SIZe command.
  • .type: The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:TYPe command.
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:VALue command.

hivalue property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:HIVALue command.

Description
  • This command sets or queries the high binary data value used with In Range and Out of Range qualifiers for a USB bus search to determine where to place a mark. The search number is specified by x. The search condition must be set to DATA.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:HIVALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:HIVALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:HIVALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:HIVALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:HIVALue?
Info
  • <QString> specifies the data value in the specified valid format (binary, hexadecimal, or symbolic). The valid characters for binary are 0, 1, and X;.

offset property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:OFFSet command.

Description
  • This command sets the byte offset to look for a data pattern at, in bytes, to be used when searching on a USB bus signal. The search number is specified by x. The search condition must be set to DATA.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:OFFSet? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:OFFSet? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:OFFSet value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:OFFSet <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:OFFSet?
Info
  • <NR1> specifies the data offset in bytes.

qualifier property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:QUALifier command.

Description
  • This command sets or queries the qualifier to be used when searching on a USB bus signal. The search condition must be set to IDANDDATA OR DATA. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:QUALifier? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:QUALifier? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:QUALifier value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:QUALifier {EQual|UNEQual|LESSthan|MOREthan|LESSEQual|MOREEQual|INrange|OUTrange}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:QUALifier?
Info
  • EQual specifies the qualifier as Equal.
  • INrange specifies the qualifier as Inside Range.
  • LESSEQual specifies the qualifier as Less Than or Equal to.
  • MOREEQual specifies the qualifier as More Than or Equal to.
  • OUTrange specifies the qualifier as Out of Range.
  • UNEQual specifies the qualifier as Unequal.
  • LESSthan specifies the qualifier as Less Than.
  • MOREthan specifies the qualifier as More Than.

size property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:SIZe command.

Description
  • This command sets or queries the length of the data string, in bytes, used for a USB bus search to determine where to place a mark. The search number is specified by x. The search condition must be set to DATA.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:SIZe? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:SIZe? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:SIZe value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:SIZe <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:SIZe?
Info
  • <NR1> specifies the data size in bytes.

type property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:TYPe command.

Description
  • This command sets or queries the USB bus search type. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:TYPe? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:TYPe? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:TYPe value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:TYPe {ANY|DATA<x>|MDATA}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:TYPe?
Info
  • ANY specifies the data packet type as Any.
  • DATA0 specifies the data packet type as DATA0.
  • DATA1 specifies the data packet type as DATA1.
  • DATA2 specifies the data packet type as DATA2.
  • MDATA specifies the data packet type as MDATA.

value property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:VALue command.

Description
  • This command sets or queries the binary data value used for a USB bus search to determine where to place a mark. The search number is specified by x. The search condition must be set to DATA.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:VALue?
Info
  • <QString> specifies the data value. The valid characters are 0, 1, and X for binary format; and A-F, 0-9, and X for hexadecimal format.

SearchSearchItemTriggerABusUsbDataHivalue

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:HIVALue command.

Description
  • This command sets or queries the high binary data value used with In Range and Out of Range qualifiers for a USB bus search to determine where to place a mark. The search number is specified by x. The search condition must be set to DATA.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:HIVALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:HIVALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:HIVALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:HIVALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:HIVALue?
Info
  • <QString> specifies the data value in the specified valid format (binary, hexadecimal, or symbolic). The valid characters for binary are 0, 1, and X;.

SearchSearchItemTriggerABusUsbDataOffset

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:OFFSet command.

Description
  • This command sets the byte offset to look for a data pattern at, in bytes, to be used when searching on a USB bus signal. The search number is specified by x. The search condition must be set to DATA.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:OFFSet? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:OFFSet? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:OFFSet value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:OFFSet <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:OFFSet?
Info
  • <NR1> specifies the data offset in bytes.

SearchSearchItemTriggerABusUsbDataQualifier

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:QUALifier command.

Description
  • This command sets or queries the qualifier to be used when searching on a USB bus signal. The search condition must be set to IDANDDATA OR DATA. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:QUALifier? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:QUALifier? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:QUALifier value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:QUALifier {EQual|UNEQual|LESSthan|MOREthan|LESSEQual|MOREEQual|INrange|OUTrange}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:QUALifier?
Info
  • EQual specifies the qualifier as Equal.
  • INrange specifies the qualifier as Inside Range.
  • LESSEQual specifies the qualifier as Less Than or Equal to.
  • MOREEQual specifies the qualifier as More Than or Equal to.
  • OUTrange specifies the qualifier as Out of Range.
  • UNEQual specifies the qualifier as Unequal.
  • LESSthan specifies the qualifier as Less Than.
  • MOREthan specifies the qualifier as More Than.

SearchSearchItemTriggerABusUsbDataSize

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:SIZe command.

Description
  • This command sets or queries the length of the data string, in bytes, used for a USB bus search to determine where to place a mark. The search number is specified by x. The search condition must be set to DATA.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:SIZe? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:SIZe? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:SIZe value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:SIZe <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:SIZe?
Info
  • <NR1> specifies the data size in bytes.

SearchSearchItemTriggerABusUsbDataType

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:TYPe command.

Description
  • This command sets or queries the USB bus search type. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:TYPe? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:TYPe? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:TYPe value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:TYPe {ANY|DATA<x>|MDATA}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:TYPe?
Info
  • ANY specifies the data packet type as Any.
  • DATA0 specifies the data packet type as DATA0.
  • DATA1 specifies the data packet type as DATA1.
  • DATA2 specifies the data packet type as DATA2.
  • MDATA specifies the data packet type as MDATA.

SearchSearchItemTriggerABusUsbDataValue

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:VALue command.

Description
  • This command sets or queries the binary data value used for a USB bus search to determine where to place a mark. The search number is specified by x. The search condition must be set to DATA.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:VALue?
Info
  • <QString> specifies the data value. The valid characters are 0, 1, and X for binary format; and A-F, 0-9, and X for hexadecimal format.

SearchSearchItemTriggerABusUsbEndpoint

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ENDPoint command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ENDPoint? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ENDPoint? query and raise an AssertionError if the returned value does not match value.
Properties
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ENDPoint:VALue command.

value property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ENDPoint:VALue command.

Description
  • This command sets or queries the endpoint binary value used for a USB bus search to determine where to place a mark. The search number is specified by x. The search condition must be set to TOKEN.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ENDPoint:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ENDPoint:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ENDPoint:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ENDPoint:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ENDPoint:VALue?
Info
  • <QString> specifies the data value in the specified valid format. The valid characters are 0, 1, and X for binary format; A-F, 0-9 and X for hexadecimal format.

SearchSearchItemTriggerABusUsbEndpointValue

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ENDPoint:VALue command.

Description
  • This command sets or queries the endpoint binary value used for a USB bus search to determine where to place a mark. The search number is specified by x. The search condition must be set to TOKEN.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ENDPoint:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ENDPoint:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ENDPoint:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ENDPoint:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ENDPoint:VALue?
Info
  • <QString> specifies the data value in the specified valid format. The valid characters are 0, 1, and X for binary format; A-F, 0-9 and X for hexadecimal format.

SearchSearchItemTriggerABusUsbErr8b10b

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ERR8B10B command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ERR8B10B? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ERR8B10B? query and raise an AssertionError if the returned value does not match value.
Properties
  • .type: The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ERR8B10B:TYPe command.

type property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ERR8B10B:TYPe command.

Description
  • This command specifies the USB3 8b10b encoding error trigger type to be valid on a character or disparity. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ERR8B10B:TYPe? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ERR8B10B:TYPe? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ERR8B10B:TYPe value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ERR8B10B:TYPe {CHARacter|DISParity}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ERR8B10B:TYPe?
Info
  • CHARacter specifies 8b10b error trigger type as character.
  • DISParity specifies 8b10b error trigger type as disparity.

SearchSearchItemTriggerABusUsbErr8b10bType

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ERR8B10B:TYPe command.

Description
  • This command specifies the USB3 8b10b encoding error trigger type to be valid on a character or disparity. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ERR8B10B:TYPe? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ERR8B10B:TYPe? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ERR8B10B:TYPe value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ERR8B10B:TYPe {CHARacter|DISParity}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ERR8B10B:TYPe?
Info
  • CHARacter specifies 8b10b error trigger type as character.
  • DISParity specifies 8b10b error trigger type as disparity.

SearchSearchItemTriggerABusUsbErrtype

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ERRTYPE command.

Description
  • This command sets or queries the error type for a USB bus search to determine where to place a mark. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ERRTYPE? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ERRTYPE? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ERRTYPE value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ERRTYPE {BITSTUFFing|CRC5|CRC16|CRCTYPes|ERR8B10B|PID}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ERRTYPE?
Info
  • BITSTUFFing specifies the error type as Bit Stuffing.
  • CRC5 specifies the error type as Token CRC5 (Cyclic Redundancy Check 5).
  • CRC16 specifies the error type as Data CRC16 (Cyclic Redundancy Check 16).
  • CRCTYPes specifies the error type as USB3 CRC errors. Requires option SRUSB3.
  • ERR8B10B specifies error type as 8b10b encoding errors. Requires option SRUSB3.
  • PID specifies the error type as PID Check Bits.

SearchSearchItemTriggerABusUsbHandshaketype

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:HANDSHAKEType command.

Description
  • This command sets or queries the handshake type for the specified USB bus trigger search to determine where to place a mark. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:HANDSHAKEType? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:HANDSHAKEType? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:HANDSHAKEType value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:HANDSHAKEType {ACK|ANY|NAK|NYET|STALL}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:HANDSHAKEType?
Info
  • ACK specifies the handshake type as Acknowledgement (positive) (XX10).
  • ANY specifies the handshake type as Any (0010).
  • NAK specifies the handshake type as Negative Acknowledgment (1010).
  • NYET specifies the handshake type as No response Yet (0110).
  • STALL specifies the handshake type as Stall (endpoint is halted or control pipe request not supported) (1110).

SearchSearchItemTriggerABusUsbHeadertype

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:HEADERTYPe command.

Description
  • This command sets or queries the Sync header type to trigger on. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:HEADERTYPe? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:HEADERTYPe? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:HEADERTYPe value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:HEADERTYPe {CONTRol|DATa|INVALid}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:HEADERTYPe?
Info
  • CONTRol specifies the search condition as control.
  • DATa specifies the search condition as data.
  • INVALid specifies the search condition as invalid.

SearchSearchItemTriggerABusUsbKeypadtype

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:KEYPADTYPe command.

Description
  • This command sets or queries whether the keypad is toggled to KCode or Data. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:KEYPADTYPe? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:KEYPADTYPe? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:KEYPADTYPe value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:KEYPADTYPe {KCODe|DATa}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:KEYPADTYPe?
Info
  • KCODe sets the Symbol toggle to K-Code and Character keypad is loaded.
  • DATa sets the Symbol toggle to Data and hex keypad is loaded.

SearchSearchItemTriggerABusUsbLane

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:LANE command.

Description
  • This command specifies the lane to search on for USB 3.2 Gen1x2 and Gen2x2. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:LANE? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:LANE? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:LANE value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:LANE {USB32G1|USB32G2}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:LANE?
Info
  • USB32G1 specifies the search condition as USB 3.2 Gen 1x2.
  • USB32G2 specifies the search condition as USB 3.2 Gen 2x2.

SearchSearchItemTriggerABusUsbOrdered

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ORDered command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ORDered? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ORDered? query and raise an AssertionError if the returned value does not match value.
Properties
  • .set: The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ORDered:SET command.

set_ property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ORDered:SET command.

Description
  • This command specifies the USB trigger type to be valid on ordered set condition. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ORDered:SET? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ORDered:SET? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ORDered:SET value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ORDered:SET {TSEQ|TS<x>|SKP|DPPSTART|DPPEND|DPPABORT|LCSTART|HPSTART}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ORDered:SET?
Info
  • TSEQ specifies the ordered set as training sequence TSEQ.
  • TS1 specifies the ordered set as training sequence TS1.
  • TS2 specifies the ordered set as training sequence TS2.
  • SKP specifies the ordered set as SKP.
  • DPPSTART specifies the ordered set as start of a data packet payload.
  • DPPEND specifies the ordered set as end of a data packet payload.
  • DPPABORT specifies the ordered set as abort a data packet payload.
  • LCSTART specifies the ordered set as start of a link command.
  • HPSTART specifies the ordered set as start of a header packet.

SearchSearchItemTriggerABusUsbOrderedSet

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ORDered:SET command.

Description
  • This command specifies the USB trigger type to be valid on ordered set condition. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ORDered:SET? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ORDered:SET? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ORDered:SET value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ORDered:SET {TSEQ|TS<x>|SKP|DPPSTART|DPPEND|DPPABORT|LCSTART|HPSTART}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ORDered:SET?
Info
  • TSEQ specifies the ordered set as training sequence TSEQ.
  • TS1 specifies the ordered set as training sequence TS1.
  • TS2 specifies the ordered set as training sequence TS2.
  • SKP specifies the ordered set as SKP.
  • DPPSTART specifies the ordered set as start of a data packet payload.
  • DPPEND specifies the ordered set as end of a data packet payload.
  • DPPABORT specifies the ordered set as abort a data packet payload.
  • LCSTART specifies the ordered set as start of a link command.
  • HPSTART specifies the ordered set as start of a header packet.

SearchSearchItemTriggerABusUsbPacket

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:PACKet command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:PACKet? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:PACKet? query and raise an AssertionError if the returned value does not match value.
Properties
  • .typeoflmp: The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:PACKet:TYPEOFLMP command.
  • .typeoftp: The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:PACKet:TYPEOFTP command.

typeoflmp property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:PACKet:TYPEOFLMP command.

Description
  • This command sets or queries the trigger condition for an USB bus on specific packet for LMP. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:PACKet:TYPEOFLMP? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:PACKet:TYPEOFLMP? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:PACKet:TYPEOFLMP value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:PACKet:TYPEOFLMP {PORTCAP|PORTCFG|PORTRSP|PRECTM|SETLF|U2IT|VDEVTEST|ANY}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:PACKet:TYPEOFLMP?
Info
  • PORTCAP specifies the link management packet type as port capability.
  • PORTCFG specifies the link management packet type as port configuration.
  • PORTRSP specifies the link management packet type as port configuration response.
  • PRECTM specifies the link management packet type as precision time management. This option is enabled only for USB 3.1 Gen 1 and USB 3.2 Gen 1.
  • SETLF specifies the link management packet type as set link function.
  • U2IT specifies the link management packet type as U2 inactivity time-out.
  • VDEVTEST specifies the link management packet type as vendor device test.
  • ANY specifies any link management packet type.

typeoftp property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:PACKet:TYPEOFTP command.

Description
  • This command sets or queries the trigger condition for an USB bus on specific packet for TP. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:PACKet:TYPEOFTP? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:PACKet:TYPEOFTP? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:PACKet:TYPEOFTP value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:PACKet:TYPEOFTP {ACK|DEVNOTif|ERDY|NRDY|PING|PINGRSP|STATus|STALl|ANY}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:PACKet:TYPEOFTP?
Info
  • ACK specifies the transaction packet type as ACK.
  • DEVNOTif specifies the transaction packet type as Dev Notification.
  • ERDY specifies the transaction packet type as ERDY.
  • NRDY specifies the transaction packet type as NRDY.
  • PING specifies the transaction packet type as PING.
  • PINGRSP specifies the transaction packet type as ping response.
  • STATus specifies the transaction packet type as status.
  • STALl specifies the transaction packet type as status.
  • ANY specifies any transaction packet type.

SearchSearchItemTriggerABusUsbPacketTypeoflmp

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:PACKet:TYPEOFLMP command.

Description
  • This command sets or queries the trigger condition for an USB bus on specific packet for LMP. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:PACKet:TYPEOFLMP? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:PACKet:TYPEOFLMP? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:PACKet:TYPEOFLMP value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:PACKet:TYPEOFLMP {PORTCAP|PORTCFG|PORTRSP|PRECTM|SETLF|U2IT|VDEVTEST|ANY}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:PACKet:TYPEOFLMP?
Info
  • PORTCAP specifies the link management packet type as port capability.
  • PORTCFG specifies the link management packet type as port configuration.
  • PORTRSP specifies the link management packet type as port configuration response.
  • PRECTM specifies the link management packet type as precision time management. This option is enabled only for USB 3.1 Gen 1 and USB 3.2 Gen 1.
  • SETLF specifies the link management packet type as set link function.
  • U2IT specifies the link management packet type as U2 inactivity time-out.
  • VDEVTEST specifies the link management packet type as vendor device test.
  • ANY specifies any link management packet type.

SearchSearchItemTriggerABusUsbPacketTypeoftp

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:PACKet:TYPEOFTP command.

Description
  • This command sets or queries the trigger condition for an USB bus on specific packet for TP. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:PACKet:TYPEOFTP? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:PACKet:TYPEOFTP? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:PACKet:TYPEOFTP value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:PACKet:TYPEOFTP {ACK|DEVNOTif|ERDY|NRDY|PING|PINGRSP|STATus|STALl|ANY}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:PACKet:TYPEOFTP?
Info
  • ACK specifies the transaction packet type as ACK.
  • DEVNOTif specifies the transaction packet type as Dev Notification.
  • ERDY specifies the transaction packet type as ERDY.
  • NRDY specifies the transaction packet type as NRDY.
  • PING specifies the transaction packet type as PING.
  • PINGRSP specifies the transaction packet type as ping response.
  • STATus specifies the transaction packet type as status.
  • STALl specifies the transaction packet type as status.
  • ANY specifies any transaction packet type.

SearchSearchItemTriggerABusUsbPackettype

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:PACKETTYPe command.

Description
  • This command sets or queries the trigger condition for an USB bus on specific packet. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:PACKETTYPe? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:PACKETTYPe? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:PACKETTYPe value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:PACKETTYPe {LMP|TP|DP|ITP|ANY}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:PACKETTYPe?
Info
  • LMP specifies the packet type as link management packet.
  • TP specifies the packet type as Transaction packet.
  • DP specifies the packet type as Data Packet.
  • ITP specifies the packet type as Isochronous timestamp packet.
  • ANY specifies the packet type as any type of packets.

SearchSearchItemTriggerABusUsbSofframenumber

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SOFFRAMENUMber command.

Description
  • This command sets or queries the frame number string to use for the Start of Frame for the specified USB bus trigger search to determine where to place a mark. The search number is specified by x. The search condition must be set to TOKEN.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SOFFRAMENUMber? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SOFFRAMENUMber? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SOFFRAMENUMber value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SOFFRAMENUMber <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SOFFRAMENUMber?
Info
  • <QString> specifies the frame number string for the Start of Frame in a valid format (binary, hexadecimal, or symbolic).

SearchSearchItemTriggerABusUsbSpecialtype

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPECIALType command.

Description
  • This command sets or queries the USB search type for the specified USB bus trigger search to determine where to place a mark. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPECIALType? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPECIALType? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPECIALType value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPECIALType {ANY|ERROr|PING|PREamble|RESERVed|SPLit}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPECIALType?
Info
  • ANY specifies the PID value as Any (XX00).
  • ERROr specifies the PID value as ERR (1100).
  • PING specifies the PID value as PING (0100).
  • PREamble specifies the PID value as PRE (1100).
  • RESERVed specifies the PID value as Reserved (0000).
  • SPLit specifies the PID value as Split (1000).

SearchSearchItemTriggerABusUsbSplit

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT? query and raise an AssertionError if the returned value does not match value.
Properties
  • .et: The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:ET command tree.
  • .hub: The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:HUB command tree.
  • .port: The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:PORT command tree.
  • .sc: The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:SC command tree.
  • .se: The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:SE command tree.

et property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:ET command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:ET? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:ET? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:ET:VALue command.

hub property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:HUB command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:HUB? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:HUB? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:HUB:VALue command.

port property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:PORT command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:PORT? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:PORT? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:PORT:VALue command.

sc property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:SC command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:SC? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:SC? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:SC:VALue command.

se property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:SE command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:SE? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:SE? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:SE:VALue command.

SearchSearchItemTriggerABusUsbSplitEt

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:ET command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:ET? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:ET? query and raise an AssertionError if the returned value does not match value.
Properties
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:ET:VALue command.

value property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:ET:VALue command.

Description
  • This command sets or queries the Endpoint Type value for the specified USB bus trigger search on split token field to determine where to place a mark. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:ET:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:ET:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:ET:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:ET:VALue {BULK|CONTROL|NOCARE|INTERRUPT|ISOchronous}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:ET:VALue?
Info
  • BULK specifies the Endpoint Type value as Bulk (10).
  • CONTROL specifies the Endpoint Type value as Control (00).
  • NOCARE specifies the Endpoint Type value as Don’t Care.
  • INTERRUPT specifies the Endpoint Type value as Interrupt (11).
  • ISOchronous specifies the Endpoint Type value as Isochronous (01).

SearchSearchItemTriggerABusUsbSplitEtValue

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:ET:VALue command.

Description
  • This command sets or queries the Endpoint Type value for the specified USB bus trigger search on split token field to determine where to place a mark. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:ET:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:ET:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:ET:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:ET:VALue {BULK|CONTROL|NOCARE|INTERRUPT|ISOchronous}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:ET:VALue?
Info
  • BULK specifies the Endpoint Type value as Bulk (10).
  • CONTROL specifies the Endpoint Type value as Control (00).
  • NOCARE specifies the Endpoint Type value as Don’t Care.
  • INTERRUPT specifies the Endpoint Type value as Interrupt (11).
  • ISOchronous specifies the Endpoint Type value as Isochronous (01).

SearchSearchItemTriggerABusUsbSplitHub

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:HUB command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:HUB? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:HUB? query and raise an AssertionError if the returned value does not match value.
Properties
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:HUB:VALue command.

value property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:HUB:VALue command.

Description
  • This command sets or queries the binary hub address value to be used when searching on a USB bus signal. The search number is specified by x. The search condition must be set to Special with packet type SPLIT.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:HUB:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:HUB:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:HUB:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:HUB:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:HUB:VALue?
Info
  • <QString> specifies the hub address. The valid characters are.

SearchSearchItemTriggerABusUsbSplitHubValue

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:HUB:VALue command.

Description
  • This command sets or queries the binary hub address value to be used when searching on a USB bus signal. The search number is specified by x. The search condition must be set to Special with packet type SPLIT.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:HUB:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:HUB:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:HUB:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:HUB:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:HUB:VALue?
Info
  • <QString> specifies the hub address. The valid characters are.

SearchSearchItemTriggerABusUsbSplitPort

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:PORT command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:PORT? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:PORT? query and raise an AssertionError if the returned value does not match value.
Properties
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:PORT:VALue command.

value property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:PORT:VALue command.

Description
  • This command sets or queries the binary port address used when searching on a USB bus signal. The search number is specified by x. The search condition must be set to Special with a packet type SPLIT.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:PORT:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:PORT:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:PORT:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:PORT:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:PORT:VALue?
Info
  • <QString> specifies the port address in the valid format. The valid characters are.

SearchSearchItemTriggerABusUsbSplitPortValue

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:PORT:VALue command.

Description
  • This command sets or queries the binary port address used when searching on a USB bus signal. The search number is specified by x. The search condition must be set to Special with a packet type SPLIT.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:PORT:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:PORT:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:PORT:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:PORT:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:PORT:VALue?
Info
  • <QString> specifies the port address in the valid format. The valid characters are.

SearchSearchItemTriggerABusUsbSplitSc

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:SC command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:SC? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:SC? query and raise an AssertionError if the returned value does not match value.
Properties
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:SC:VALue command.

value property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:SC:VALue command.

Description
  • This command sets or queries the Start/Complete value for the specified USB bus trigger on split token field search to determine where to place a mark. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:SC:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:SC:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:SC:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:SC:VALue {CSPLIT|NOCARE|SSPLIT}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:SC:VALue?
Info
  • CSPLIT specifies Complete (CSPLIT)(1) Start/Complete value.
  • NOCARE specifies the Start/Complete value as Don’t Care (X).
  • SSPLIT specifies Start (SSPLIT) (0) Start/Complete value.

SearchSearchItemTriggerABusUsbSplitScValue

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:SC:VALue command.

Description
  • This command sets or queries the Start/Complete value for the specified USB bus trigger on split token field search to determine where to place a mark. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:SC:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:SC:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:SC:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:SC:VALue {CSPLIT|NOCARE|SSPLIT}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:SC:VALue?
Info
  • CSPLIT specifies Complete (CSPLIT)(1) Start/Complete value.
  • NOCARE specifies the Start/Complete value as Don’t Care (X).
  • SSPLIT specifies Start (SSPLIT) (0) Start/Complete value.

SearchSearchItemTriggerABusUsbSplitSe

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:SE command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:SE? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:SE? query and raise an AssertionError if the returned value does not match value.
Properties
  • .value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:SE:VALue command.

value property

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:SE:VALue command.

Description
  • This command sets or queries the Start/End value for the specified USB bus trigger on split token field search to determine where to place a mark. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:SE:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:SE:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:SE:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:SE:VALue {NOCARE|FULLSPEED|ISOALL|ISOEND|ISOMID|ISOSTART|LOWSPEED}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:SE:VALue?
Info
  • NOCARE specifies Don’t Care (X) Start/End bit value.
  • FULLSPEED specifies Control/Bulk/Interrupt Full Speed device (0X) Start/End bit value.
  • ISOALL specifies Isochronous Data is All (11) Start/End bit value.
  • ISOEND specifies Isochronous Data is End (01) Start/End bit value.
  • ISOMID specifies Isochronous Data is Middle (00) Start/End bit value.
  • ISOSTART specifies Isochronous Data is Start (10) Start/End bit value.
  • LOWSPEED specifies Control/Bulk/Interrupt Low Speed device (1X) Start/End bit value.

SearchSearchItemTriggerABusUsbSplitSeValue

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:SE:VALue command.

Description
  • This command sets or queries the Start/End value for the specified USB bus trigger on split token field search to determine where to place a mark. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:SE:VALue? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:SE:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:SE:VALue value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:SE:VALue {NOCARE|FULLSPEED|ISOALL|ISOEND|ISOMID|ISOSTART|LOWSPEED}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:SE:VALue?
Info
  • NOCARE specifies Don’t Care (X) Start/End bit value.
  • FULLSPEED specifies Control/Bulk/Interrupt Full Speed device (0X) Start/End bit value.
  • ISOALL specifies Isochronous Data is All (11) Start/End bit value.
  • ISOEND specifies Isochronous Data is End (01) Start/End bit value.
  • ISOMID specifies Isochronous Data is Middle (00) Start/End bit value.
  • ISOSTART specifies Isochronous Data is Start (10) Start/End bit value.
  • LOWSPEED specifies Control/Bulk/Interrupt Low Speed device (1X) Start/End bit value.

SearchSearchItemTriggerABusUsbTokentype

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:TOKENType command.

Description
  • This command sets or queries the token type used to search a USB bus signal. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:TOKENType? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:TOKENType? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:TOKENType value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:TOKENType {ANY|IN|OUT|SETUP|SOF}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:TOKENType?
Info
  • ANY specifies the token type as Any (XX01).
  • IN specifies the token type as IN (1001).
  • OUT specifies the token type as OUT (0001).
  • SETUP specifies the token type as SETUP (1101).
  • SOF specifies the token type as Start Of Frame (0101).

SearchSearchItemTriggerABusUsbUsb3g2character

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:USB3G2CHARacter command.

Description
  • This command sets or queries the trigger condition for a USB bus on specific Control symbol. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:USB3G2CHARacter? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:USB3G2CHARacter? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:USB3G2CHARacter value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:USB3G2CHARacter {COM|EDB|END|EPF|SDP|SHP|SKP|SLC|SUB|Any}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:USB3G2CHARacter?
Info
  • COM specifies the control symbol as Comma (K28.5).
  • EDB specifies the control symbol as End Bad (K28.3).
  • END specifies the control symbol as End (K29.7).
  • EPF specifies the control symbol as End Packet Framing (K23.7).
  • SDP specifies the control symbol as Start Data Packet (K28.2).
  • SHP specifies the control symbol as Start Header Packet (K27.7).
  • SKP specifies the control symbol as Skip (K28.1).
  • SLC specifies the control symbol as Start Link Command (K30.7).
  • SUB specifies the control symbol as Secode Error Substitution (K28.4).
  • Any specifies any control symbol.

SearchSearchItemTriggerACycle

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:CYCLe command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:CYCLe? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:CYCLe? query and raise an AssertionError if the returned value does not match value.
Properties
  • .highlimit: The SEARCH:SEARCH<x>:TRIGger:A:CYCLe:HIGHLimit command.
  • .polarity: The SEARCH:SEARCH<x>:TRIGger:A:CYCLe:POLarity command.
  • .source: The SEARCH:SEARCH<x>:TRIGger:A:CYCLe:SOUrce command.
  • .threshold: The SEARCH:SEARCH<x>:TRIGger:A:CYCLe:THReshold command.
  • .view: The SEARCH:SEARCH<x>:TRIGger:A:CYCLe:VIEW command.
  • .when: The SEARCH:SEARCH<x>:TRIGger:A:CYCLe:WHEn command.

highlimit property

Return the SEARCH:SEARCH<x>:TRIGger:A:CYCLe:HIGHLimit command.

Description
  • This command sets or queries the Period high limit. When the VIEWis PERiod the units of this number are time (Seconds). The high limit is used in combination with the low limit to define a range if the WHEn enumeration is WITHin or OUTside. These limits specify the most significant characteristic of the signal for this cycle Search Type. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:CYCLe:HIGHLimit? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:CYCLe:HIGHLimit? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:CYCLe:HIGHLimit value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:CYCLe:HIGHLimit <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:CYCLe:HIGHLimit?
Info
  • <NR3> is the upper limit to use, in seconds, when searching for a cycle search.

polarity property

Return the SEARCH:SEARCH<x>:TRIGger:A:CYCLe:POLarity command.

Description
  • This command sets or queries the polarity for the cycle search. It refers to the polarity of the edges that begin and end a given period of the signals. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:CYCLe:POLarity? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:CYCLe:POLarity? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:CYCLe:POLarity value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:CYCLe:POLarity {POSitive|NEGative}
- SEARCH:SEARCH<x>:TRIGger:A:CYCLe:POLarity?
Info
  • POSitive specifies positive polarity for a cycle search.
  • NEGative specifies negative polarity for a cycle search.

source property

Return the SEARCH:SEARCH<x>:TRIGger:A:CYCLe:SOUrce command.

Description
  • This command sets and queries the source for the cycle search input. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:CYCLe:SOUrce? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:CYCLe:SOUrce? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:CYCLe:SOUrce value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:CYCLe:SOUrce {CH<x>|MATH<x>|REF<x>}
- SEARCH:SEARCH<x>:TRIGger:A:CYCLe:SOUrce?
Info
  • CH<x> specifies one input channel as the edge source, where the channel number is specified by x.
  • MATH<x> specifies the math waveform as the search source, where the math number is specified by x.
  • REF<x> specifies the reference waveform as the search source, where the reference number is specified by x.

threshold property

Return the SEARCH:SEARCH<x>:TRIGger:A:CYCLe:THReshold command.

Description
  • Sets or queries the source threshold level for a cycle trigger search to determine where to place a mark. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:CYCLe:THReshold? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:CYCLe:THReshold? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:CYCLe:THReshold value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:CYCLe:THReshold <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:CYCLe:THReshold?
Info
  • <NR3> is the source threshold level for a cycle search.

view property

Return the SEARCH:SEARCH<x>:TRIGger:A:CYCLe:VIEW command.

Description
  • This command sets or queries the ‘view’ for the cycle search. When Period is selected the LOWLimit and HIGHLimit values are in units of time (Seconds). When Frequency is selected, the LOWLimit and HIGHLimit are in frequency (Hz). This command helps to interpret the mode of units used by the user.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:CYCLe:VIEW? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:CYCLe:VIEW? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:CYCLe:VIEW value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:CYCLe:VIEW {PERIOD|FREQUENCY}
- SEARCH:SEARCH<x>:TRIGger:A:CYCLe:VIEW?
Info
  • PERIOD specifies LOWLimit and HIGHLimit values are in units of time (Seconds).
  • FREQUENCY specifies LOWLimit and HIGHLimit values are in units of frequency (Hz).

when property

Return the SEARCH:SEARCH<x>:TRIGger:A:CYCLe:WHEn command.

Description
  • This command specifies to search when a signal is detected with a period (duration) that is less than, greater than, equal to, or unequal to a specified value (set using SEARCH:SEARCH<x>:TRIGger:A:CYCLe:LOWLimit), or whose width falls outside of or within a specified range of two values (set using SEARCH:SEARCH<x>:TRIGger:A:CYCLe:LOWLimit and SEARCH:SEARCH<x>:TRIGger:A:CYCLe:HIGHLimit). The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:CYCLe:WHEn? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:CYCLe:WHEn? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:CYCLe:WHEn value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:CYCLe:WHEn {LESSthan|MOREthan|EQual|UNEqual|WIThin|OUTside}
- SEARCH:SEARCH<x>:TRIGger:A:CYCLe:WHEn?
Info
  • LESSthan causes a search when a cycle is detected with a period (frequency) of the signal is less than the period (frequency) of the Low Limit.
  • MOREthan causes a search when a cycle is detected with a the period (frequency) of the signal is greater than the period (frequency) of the Low Limit.
  • EQual causes a search when a cycle is detected when the period (frequency) of the signal is equal to the Low Limit within a ±5% tolerance.
  • UNEqual causes a search when a cycle is detected when the period (frequency) of the signal is equal to the Low Limit within a ±5% tolerance.
  • WIThin causes a search when a cycle is detected with a period (frequency) that is within a range set by the Low Limit and the High Limit.
  • OUTside causes a search when a cycle is detected with a period (frequency) that is outside of the range defined by the Low Limit and the High Limit.

SearchSearchItemTriggerACycleHighlimit

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:CYCLe:HIGHLimit command.

Description
  • This command sets or queries the Period high limit. When the VIEWis PERiod the units of this number are time (Seconds). The high limit is used in combination with the low limit to define a range if the WHEn enumeration is WITHin or OUTside. These limits specify the most significant characteristic of the signal for this cycle Search Type. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:CYCLe:HIGHLimit? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:CYCLe:HIGHLimit? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:CYCLe:HIGHLimit value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:CYCLe:HIGHLimit <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:CYCLe:HIGHLimit?
Info
  • <NR3> is the upper limit to use, in seconds, when searching for a cycle search.

SearchSearchItemTriggerACyclePolarity

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:CYCLe:POLarity command.

Description
  • This command sets or queries the polarity for the cycle search. It refers to the polarity of the edges that begin and end a given period of the signals. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:CYCLe:POLarity? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:CYCLe:POLarity? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:CYCLe:POLarity value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:CYCLe:POLarity {POSitive|NEGative}
- SEARCH:SEARCH<x>:TRIGger:A:CYCLe:POLarity?
Info
  • POSitive specifies positive polarity for a cycle search.
  • NEGative specifies negative polarity for a cycle search.

SearchSearchItemTriggerACycleSource

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:CYCLe:SOUrce command.

Description
  • This command sets and queries the source for the cycle search input. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:CYCLe:SOUrce? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:CYCLe:SOUrce? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:CYCLe:SOUrce value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:CYCLe:SOUrce {CH<x>|MATH<x>|REF<x>}
- SEARCH:SEARCH<x>:TRIGger:A:CYCLe:SOUrce?
Info
  • CH<x> specifies one input channel as the edge source, where the channel number is specified by x.
  • MATH<x> specifies the math waveform as the search source, where the math number is specified by x.
  • REF<x> specifies the reference waveform as the search source, where the reference number is specified by x.

SearchSearchItemTriggerACycleThreshold

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:CYCLe:THReshold command.

Description
  • Sets or queries the source threshold level for a cycle trigger search to determine where to place a mark. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:CYCLe:THReshold? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:CYCLe:THReshold? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:CYCLe:THReshold value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:CYCLe:THReshold <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:CYCLe:THReshold?
Info
  • <NR3> is the source threshold level for a cycle search.

SearchSearchItemTriggerACycleView

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:CYCLe:VIEW command.

Description
  • This command sets or queries the ‘view’ for the cycle search. When Period is selected the LOWLimit and HIGHLimit values are in units of time (Seconds). When Frequency is selected, the LOWLimit and HIGHLimit are in frequency (Hz). This command helps to interpret the mode of units used by the user.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:CYCLe:VIEW? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:CYCLe:VIEW? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:CYCLe:VIEW value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:CYCLe:VIEW {PERIOD|FREQUENCY}
- SEARCH:SEARCH<x>:TRIGger:A:CYCLe:VIEW?
Info
  • PERIOD specifies LOWLimit and HIGHLimit values are in units of time (Seconds).
  • FREQUENCY specifies LOWLimit and HIGHLimit values are in units of frequency (Hz).

SearchSearchItemTriggerACycleWhen

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:CYCLe:WHEn command.

Description
  • This command specifies to search when a signal is detected with a period (duration) that is less than, greater than, equal to, or unequal to a specified value (set using SEARCH:SEARCH<x>:TRIGger:A:CYCLe:LOWLimit), or whose width falls outside of or within a specified range of two values (set using SEARCH:SEARCH<x>:TRIGger:A:CYCLe:LOWLimit and SEARCH:SEARCH<x>:TRIGger:A:CYCLe:HIGHLimit). The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:CYCLe:WHEn? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:CYCLe:WHEn? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:CYCLe:WHEn value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:CYCLe:WHEn {LESSthan|MOREthan|EQual|UNEqual|WIThin|OUTside}
- SEARCH:SEARCH<x>:TRIGger:A:CYCLe:WHEn?
Info
  • LESSthan causes a search when a cycle is detected with a period (frequency) of the signal is less than the period (frequency) of the Low Limit.
  • MOREthan causes a search when a cycle is detected with a the period (frequency) of the signal is greater than the period (frequency) of the Low Limit.
  • EQual causes a search when a cycle is detected when the period (frequency) of the signal is equal to the Low Limit within a ±5% tolerance.
  • UNEqual causes a search when a cycle is detected when the period (frequency) of the signal is equal to the Low Limit within a ±5% tolerance.
  • WIThin causes a search when a cycle is detected with a period (frequency) that is within a range set by the Low Limit and the High Limit.
  • OUTside causes a search when a cycle is detected with a period (frequency) that is outside of the range defined by the Low Limit and the High Limit.

SearchSearchItemTriggerAEdge

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:EDGE command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:EDGE? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:EDGE? query and raise an AssertionError if the returned value does not match value.
Properties
  • .slope: The SEARCH:SEARCH<x>:TRIGger:A:EDGE:SLOpe command.
  • .source: The SEARCH:SEARCH<x>:TRIGger:A:EDGE:SOUrce command.
  • .threshold: The SEARCH:SEARCH<x>:TRIGger:A:EDGE:THReshold command.

slope property

Return the SEARCH:SEARCH<x>:TRIGger:A:EDGE:SLOpe command.

Description
  • This command sets or queries the slope for an edge trigger search to determine where to place a mark. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:EDGE:SLOpe? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:EDGE:SLOpe? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:EDGE:SLOpe value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:EDGE:SLOpe {RISe|FALL|EITher}
- SEARCH:SEARCH<x>:TRIGger:A:EDGE:SLOpe?
Info
  • RISe specifies a rising edge.
  • FALL specifies a falling edge.
  • EITher specifies either rising or falling edge.

source property

Return the SEARCH:SEARCH<x>:TRIGger:A:EDGE:SOUrce command.

Description
  • This command sets or queries the source waveform for an edge trigger search to determine where to place a mark. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:EDGE:SOUrce? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:EDGE:SOUrce? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:EDGE:SOUrce value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:EDGE:SOUrce {CH<x>|CH<x>_D<x>|MATH<x>|REF<x>|REF<x>_D<x>}
- SEARCH:SEARCH<x>:TRIGger:A:EDGE:SOUrce?
Info
  • CH<x> specifies one input channel as the edge source, where the channel number is specified by x.
  • CH<x>_D<x> specifies a digital reference waveform as the source waveform for the specified search.
  • MATH<x> specifies the math waveform as the search source, where the math number is specified by x.
  • REF<x> specifies the reference waveform as the search source, where thereference number is specified by x.
  • REF<x>_D<x> specifies a digital reference waveform as the source waveform for the specified search.

threshold property

Return the SEARCH:SEARCH<x>:TRIGger:A:EDGE:THReshold command.

Description
  • This command sets or queries the source threshold level for an edge trigger search to determine where to place a mark. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:EDGE:THReshold? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:EDGE:THReshold? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:EDGE:THReshold value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:EDGE:THReshold <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:EDGE:THReshold?
Info
  • <NR3> is the source threshold level for an edge trigger search.

SearchSearchItemTriggerAEdgeSlope

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:EDGE:SLOpe command.

Description
  • This command sets or queries the slope for an edge trigger search to determine where to place a mark. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:EDGE:SLOpe? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:EDGE:SLOpe? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:EDGE:SLOpe value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:EDGE:SLOpe {RISe|FALL|EITher}
- SEARCH:SEARCH<x>:TRIGger:A:EDGE:SLOpe?
Info
  • RISe specifies a rising edge.
  • FALL specifies a falling edge.
  • EITher specifies either rising or falling edge.

SearchSearchItemTriggerAEdgeSource

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:EDGE:SOUrce command.

Description
  • This command sets or queries the source waveform for an edge trigger search to determine where to place a mark. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:EDGE:SOUrce? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:EDGE:SOUrce? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:EDGE:SOUrce value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:EDGE:SOUrce {CH<x>|CH<x>_D<x>|MATH<x>|REF<x>|REF<x>_D<x>}
- SEARCH:SEARCH<x>:TRIGger:A:EDGE:SOUrce?
Info
  • CH<x> specifies one input channel as the edge source, where the channel number is specified by x.
  • CH<x>_D<x> specifies a digital reference waveform as the source waveform for the specified search.
  • MATH<x> specifies the math waveform as the search source, where the math number is specified by x.
  • REF<x> specifies the reference waveform as the search source, where thereference number is specified by x.
  • REF<x>_D<x> specifies a digital reference waveform as the source waveform for the specified search.

SearchSearchItemTriggerAEdgeThreshold

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:EDGE:THReshold command.

Description
  • This command sets or queries the source threshold level for an edge trigger search to determine where to place a mark. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:EDGE:THReshold? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:EDGE:THReshold? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:EDGE:THReshold value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:EDGE:THReshold <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:EDGE:THReshold?
Info
  • <NR3> is the source threshold level for an edge trigger search.

SearchSearchItemTriggerALogic

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:LOGIc command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc? query and raise an AssertionError if the returned value does not match value.
Properties
  • .clock: The SEARCH:SEARCH<x>:TRIGger:A:LOGIc:CLOCk command tree.
  • .deltatime: The SEARCH:SEARCH<x>:TRIGger:A:LOGIc:DELTatime command.
  • .function: The SEARCH:SEARCH<x>:TRIGger:A:LOGIc:FUNCtion command.
  • .input: The SEARCH:SEARCH<x>:TRIGger:A:LOGIc:INPUT command tree.
  • .level: The SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LEVel command tree.
  • .logicpattern: The SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LOGICPattern command tree.
  • .polarity: The SEARCH:SEARCH<x>:TRIGger:A:LOGIc:POLarity command.
  • .useclockedge: The SEARCH:SEARCH<x>:TRIGger:A:LOGIc:USEClockedge command.
  • .when: The SEARCH:SEARCH<x>:TRIGger:A:LOGIc:WHEn command.

clock property

Return the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:CLOCk command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:CLOCk? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:CLOCk? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .threshold: The SEARCH:SEARCH<x>:TRIGger:A:LOGIc:CLOCk:THReshold command.

deltatime property

Return the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:DELTatime command.

Description
  • This command specifies the Logic search delta time value. The time value is used as part of the Logic search condition to determine if the duration of a logic pattern meets the specified time constraints. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:DELTatime? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:DELTatime? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:DELTatime value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:DELTatime <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:DELTatime?
Info
  • <NR3> is delta time value.

function property

Return the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:FUNCtion command.

Description
  • This command sets or queries the logic operator for a pattern or state trigger search to determine where to place a mark. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:FUNCtion? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:FUNCtion? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:FUNCtion value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:FUNCtion {AND|NANd|NOR|OR}
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:FUNCtion?
Info
  • AND places a mark if all conditions are true.
  • NANd places a mark if any of the conditions are false.
  • NOR places a mark if all conditions are false.
  • OR places a mark if any of the conditions are true.

input property

Return the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:INPUT command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:INPUT? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:INPUT? query and raise an AssertionError if the returned value does not match value.
Info
  • CH<x> specifies an analog channel as the search source, where the channel number is specified by x.
Sub-properties
  • .clock: The SEARCH:SEARCH<x>:TRIGger:A:LOGIc:INPUT:CLOCK command tree.

level property

Return the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LEVel command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LEVel? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LEVel? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .ch: The SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LEVel:CH<x> command.
  • .math: The SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LEVel:MATH<x> command.
  • .ref: The SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LEVel:REF<x> command.

logicpattern property

Return the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LOGICPattern command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LOGICPattern? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LOGICPattern? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .ch: The SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LOGICPattern:CH<x> command.
  • .math: The SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LOGICPattern:MATH<x> command.
  • .ref: The SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LOGICPattern:REF<x> command.

polarity property

Return the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:POLarity command.

Description
  • This command sets or queries the polarity for the clock channel when Use Clock Edge is set to Yes for Logic search type. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:POLarity? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:POLarity? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:POLarity value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:POLarity {POSitive|NEGative|EITher}
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:POLarity?
Info
  • POSitive specifies using the positive clock edge.
  • NEGative specifies using negative clock edge.
  • EITher specifies using either the positive or negative clock edge.

useclockedge property

Return the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:USEClockedge command.

Description
  • This command specifies whether or not Logic search uses a clock source. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:USEClockedge? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:USEClockedge? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:USEClockedge value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:USEClockedge {ON|OFF|1|0}
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:USEClockedge?
Info
  • OFF specifies not to use the clock source.
  • ON specifies to use the clock source.
  • 0 specifies not to use the clock source.
  • 1 specifies to use the clock source.

when property

Return the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:WHEn command.

Description
  • This command sets or queries the condition for generating an A or B logic search with respect to the defined input pattern.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:WHEn? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:WHEn? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:WHEn value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:WHEn {TRUe|FALSe|MOREthan|LESSThan|EQual|UNEQual}
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:WHEn?
Info
  • TRUe searches on an input value that is true.
  • FALSe searches on an input value that is false.
  • MOREthan searches on an input value that is greater than a set value.
  • LESSthan searches on an input value that is less than a set value.
  • EQual searches on an input value that is equal to a set value.
  • UNEQual searches on an input value that is not equal to a set value.

SearchSearchItemTriggerALogicClock

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:LOGIc:CLOCk command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:CLOCk? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:CLOCk? query and raise an AssertionError if the returned value does not match value.
Properties
  • .threshold: The SEARCH:SEARCH<x>:TRIGger:A:LOGIc:CLOCk:THReshold command.

threshold property

Return the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:CLOCk:THReshold command.

Description
  • This command sets or queries the logic clock threshold for a logic trigger search to determine where to place a mark. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:CLOCk:THReshold? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:CLOCk:THReshold? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:CLOCk:THReshold value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:CLOCk:THReshold <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:CLOCk:THReshold?
Info
  • <NR3> is the logic clock threshold.

SearchSearchItemTriggerALogicClockThreshold

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:LOGIc:CLOCk:THReshold command.

Description
  • This command sets or queries the logic clock threshold for a logic trigger search to determine where to place a mark. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:CLOCk:THReshold? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:CLOCk:THReshold? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:CLOCk:THReshold value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:CLOCk:THReshold <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:CLOCk:THReshold?
Info
  • <NR3> is the logic clock threshold.

SearchSearchItemTriggerALogicDeltatime

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:LOGIc:DELTatime command.

Description
  • This command specifies the Logic search delta time value. The time value is used as part of the Logic search condition to determine if the duration of a logic pattern meets the specified time constraints. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:DELTatime? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:DELTatime? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:DELTatime value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:DELTatime <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:DELTatime?
Info
  • <NR3> is delta time value.

SearchSearchItemTriggerALogicFunction

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:LOGIc:FUNCtion command.

Description
  • This command sets or queries the logic operator for a pattern or state trigger search to determine where to place a mark. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:FUNCtion? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:FUNCtion? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:FUNCtion value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:FUNCtion {AND|NANd|NOR|OR}
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:FUNCtion?
Info
  • AND places a mark if all conditions are true.
  • NANd places a mark if any of the conditions are false.
  • NOR places a mark if all conditions are false.
  • OR places a mark if any of the conditions are true.

SearchSearchItemTriggerALogicInput

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:LOGIc:INPUT command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:INPUT? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:INPUT? query and raise an AssertionError if the returned value does not match value.
Info
  • CH<x> specifies an analog channel as the search source, where the channel number is specified by x.
Properties
  • .clock: The SEARCH:SEARCH<x>:TRIGger:A:LOGIc:INPUT:CLOCK command tree.

clock property

Return the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:INPUT:CLOCK command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:INPUT:CLOCK? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:INPUT:CLOCK? query and raise an AssertionError if the returned value does not match value.
Info
  • CH<x> specifies an analog channel as the search source, where the channel number is specified by x.
Sub-properties
  • .source: The SEARCH:SEARCH<x>:TRIGger:A:LOGIc:INPUT:CLOCK:SOUrce command.

SearchSearchItemTriggerALogicInputClock

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:LOGIc:INPUT:CLOCK command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:INPUT:CLOCK? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:INPUT:CLOCK? query and raise an AssertionError if the returned value does not match value.
Info
  • CH<x> specifies an analog channel as the search source, where the channel number is specified by x.
Properties
  • .source: The SEARCH:SEARCH<x>:TRIGger:A:LOGIc:INPUT:CLOCK:SOUrce command.

source property

Return the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:INPUT:CLOCK:SOUrce command.

Description
  • This command specifies or queries the channel to use as the clock source for logic trigger. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:INPUT:CLOCK:SOUrce? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:INPUT:CLOCK:SOUrce? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:INPUT:CLOCK:SOUrce value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:INPUT:CLOCK:SOUrce {CH<x>|CH<x>_D<x>|REF<x>_D<x>}
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:INPUT:CLOCK:SOUrce?
Info
  • CH<x> specifies an analog channel as the search source, where the channel number is specified by x.
  • CH<x>_D<x> specifies a digital reference waveform as the source waveform for the specified search.
  • REF<x>_D<x> specifies a digital reference waveform as the source waveform for the specified search.

SearchSearchItemTriggerALogicInputClockSource

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:LOGIc:INPUT:CLOCK:SOUrce command.

Description
  • This command specifies or queries the channel to use as the clock source for logic trigger. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:INPUT:CLOCK:SOUrce? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:INPUT:CLOCK:SOUrce? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:INPUT:CLOCK:SOUrce value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:INPUT:CLOCK:SOUrce {CH<x>|CH<x>_D<x>|REF<x>_D<x>}
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:INPUT:CLOCK:SOUrce?
Info
  • CH<x> specifies an analog channel as the search source, where the channel number is specified by x.
  • CH<x>_D<x> specifies a digital reference waveform as the source waveform for the specified search.
  • REF<x>_D<x> specifies a digital reference waveform as the source waveform for the specified search.

SearchSearchItemTriggerALogicLevel

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LEVel command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LEVel? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LEVel? query and raise an AssertionError if the returned value does not match value.
Properties
  • .ch: The SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LEVel:CH<x> command.
  • .math: The SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LEVel:MATH<x> command.
  • .ref: The SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LEVel:REF<x> command.

ch property

Return the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LEVel:CH<x> command.

Description
  • This command sets or queries the voltage level to use for logic trigger search. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LEVel:CH<x>? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LEVel:CH<x>? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LEVel:CH<x> value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LEVel:CH<x> <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LEVel:CH<x>?
Info
  • <NR3> is the voltage level to use for logic trigger search.

math property

Return the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LEVel:MATH<x> command.

Description
  • This command sets the voltage level to use for logic trigger search. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LEVel:MATH<x>? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LEVel:MATH<x>? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LEVel:MATH<x> value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LEVel:MATH<x> <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LEVel:MATH<x>?
Info
  • <NR3> is the voltage level to use for logic trigger search.

ref property

Return the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LEVel:REF<x> command.

Description
  • This command sets the voltage level to use for logic trigger search. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LEVel:REF<x>? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LEVel:REF<x>? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LEVel:REF<x> value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LEVel:REF<x> <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LEVel:REF<x>?
Info
  • <NR3> is the voltage level to use for logic trigger search.

SearchSearchItemTriggerALogicLevelChannel

Bases: ValidatedChannel, SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LEVel:CH<x> command.

Description
  • This command sets or queries the voltage level to use for logic trigger search. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LEVel:CH<x>? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LEVel:CH<x>? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LEVel:CH<x> value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LEVel:CH<x> <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LEVel:CH<x>?
Info
  • <NR3> is the voltage level to use for logic trigger search.

SearchSearchItemTriggerALogicLevelMathItem

Bases: ValidatedDynamicNumberCmd, SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LEVel:MATH<x> command.

Description
  • This command sets the voltage level to use for logic trigger search. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LEVel:MATH<x>? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LEVel:MATH<x>? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LEVel:MATH<x> value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LEVel:MATH<x> <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LEVel:MATH<x>?
Info
  • <NR3> is the voltage level to use for logic trigger search.

SearchSearchItemTriggerALogicLevelRefItem

Bases: ValidatedDynamicNumberCmd, SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LEVel:REF<x> command.

Description
  • This command sets the voltage level to use for logic trigger search. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LEVel:REF<x>? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LEVel:REF<x>? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LEVel:REF<x> value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LEVel:REF<x> <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LEVel:REF<x>?
Info
  • <NR3> is the voltage level to use for logic trigger search.

SearchSearchItemTriggerALogicLogicpattern

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LOGICPattern command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LOGICPattern? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LOGICPattern? query and raise an AssertionError if the returned value does not match value.
Properties
  • .ch: The SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LOGICPattern:CH<x> command.
  • .math: The SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LOGICPattern:MATH<x> command.
  • .ref: The SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LOGICPattern:REF<x> command.

ch property

Return the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LOGICPattern:CH<x> command.

Description
  • This command sets or queries the conditions used for generating an A logic pattern, with respect to the defined input pattern, and identifies the time that the selected pattern may be true and still generate the trigger. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LOGICPattern:CH<x>? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LOGICPattern:CH<x>? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LOGICPattern:CH<x> value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LOGICPattern:CH<x> {H|L|X}
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LOGICPattern:CH<x>?
Info
  • H specifies triggering when the pattern is high.
  • L specifies triggering when the pattern is low.
  • X specifies triggering when the pattern is high or low.
Sub-properties
  • .d: The SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LOGICPattern:CH<x>_D<x> command.

math property

Return the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LOGICPattern:MATH<x> command.

Description
  • This command sets or queries the conditions used for generating an A logic pattern, with respect to the defined input pattern, and identifies the time that the selected pattern may be true and still generate the trigger. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LOGICPattern:MATH<x>? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LOGICPattern:MATH<x>? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LOGICPattern:MATH<x> value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LOGICPattern:MATH<x> {H|L|X}
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LOGICPattern:MATH<x>?
Info
  • H specifies triggering when the pattern is high.
  • L specifies triggering when the pattern is low.
  • X specifies triggering when the pattern is high or low.

ref property

Return the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LOGICPattern:REF<x> command.

Description
  • This command sets or queries the conditions used for generating an A logic pattern, with respect to the defined input pattern, and identifies the time that the selected pattern may be true and still generate the trigger. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LOGICPattern:REF<x>? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LOGICPattern:REF<x>? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LOGICPattern:REF<x> value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LOGICPattern:REF<x> {H|L|X}
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LOGICPattern:REF<x>?
Info
  • H specifies triggering when the pattern is high.
  • L specifies triggering when the pattern is low.
  • X specifies triggering when the pattern is high or low.

SearchSearchItemTriggerALogicLogicpatternChannel

Bases: ValidatedChannel, SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LOGICPattern:CH<x> command.

Description
  • This command sets or queries the conditions used for generating an A logic pattern, with respect to the defined input pattern, and identifies the time that the selected pattern may be true and still generate the trigger. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LOGICPattern:CH<x>? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LOGICPattern:CH<x>? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LOGICPattern:CH<x> value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LOGICPattern:CH<x> {H|L|X}
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LOGICPattern:CH<x>?
Info
  • H specifies triggering when the pattern is high.
  • L specifies triggering when the pattern is low.
  • X specifies triggering when the pattern is high or low.
Properties
  • .d: The SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LOGICPattern:CH<x>_D<x> command.

d property

Return the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LOGICPattern:CH<x>_D<x> command.

Description
  • This command sets or queries the conditions used for generating an A logic pattern, with respect to the defined input pattern, and identifies the time that the selected pattern may be true and still generate the trigger. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LOGICPattern:CH<x>_D<x>? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LOGICPattern:CH<x>_D<x>? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LOGICPattern:CH<x>_D<x> value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LOGICPattern:CH<x>_D<x> {H|L|X}
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LOGICPattern:CH<x>_D<x>?
Info
  • H specifies triggering when the pattern is high.
  • L specifies triggering when the pattern is low.
  • X specifies triggering when the pattern is high or low.

SearchSearchItemTriggerALogicLogicpatternChannelDigitalBit

Bases: ValidatedDigitalBit, SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LOGICPattern:CH<x>_D<x> command.

Description
  • This command sets or queries the conditions used for generating an A logic pattern, with respect to the defined input pattern, and identifies the time that the selected pattern may be true and still generate the trigger. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LOGICPattern:CH<x>_D<x>? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LOGICPattern:CH<x>_D<x>? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LOGICPattern:CH<x>_D<x> value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LOGICPattern:CH<x>_D<x> {H|L|X}
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LOGICPattern:CH<x>_D<x>?
Info
  • H specifies triggering when the pattern is high.
  • L specifies triggering when the pattern is low.
  • X specifies triggering when the pattern is high or low.

SearchSearchItemTriggerALogicLogicpatternMathItem

Bases: ValidatedDynamicNumberCmd, SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LOGICPattern:MATH<x> command.

Description
  • This command sets or queries the conditions used for generating an A logic pattern, with respect to the defined input pattern, and identifies the time that the selected pattern may be true and still generate the trigger. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LOGICPattern:MATH<x>? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LOGICPattern:MATH<x>? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LOGICPattern:MATH<x> value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LOGICPattern:MATH<x> {H|L|X}
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LOGICPattern:MATH<x>?
Info
  • H specifies triggering when the pattern is high.
  • L specifies triggering when the pattern is low.
  • X specifies triggering when the pattern is high or low.

SearchSearchItemTriggerALogicLogicpatternRefItem

Bases: ValidatedDynamicNumberCmd, SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LOGICPattern:REF<x> command.

Description
  • This command sets or queries the conditions used for generating an A logic pattern, with respect to the defined input pattern, and identifies the time that the selected pattern may be true and still generate the trigger. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LOGICPattern:REF<x>? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LOGICPattern:REF<x>? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LOGICPattern:REF<x> value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LOGICPattern:REF<x> {H|L|X}
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LOGICPattern:REF<x>?
Info
  • H specifies triggering when the pattern is high.
  • L specifies triggering when the pattern is low.
  • X specifies triggering when the pattern is high or low.

SearchSearchItemTriggerALogicPolarity

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:LOGIc:POLarity command.

Description
  • This command sets or queries the polarity for the clock channel when Use Clock Edge is set to Yes for Logic search type. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:POLarity? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:POLarity? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:POLarity value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:POLarity {POSitive|NEGative|EITher}
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:POLarity?
Info
  • POSitive specifies using the positive clock edge.
  • NEGative specifies using negative clock edge.
  • EITher specifies using either the positive or negative clock edge.

SearchSearchItemTriggerALogicUseclockedge

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:LOGIc:USEClockedge command.

Description
  • This command specifies whether or not Logic search uses a clock source. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:USEClockedge? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:USEClockedge? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:USEClockedge value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:USEClockedge {ON|OFF|1|0}
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:USEClockedge?
Info
  • OFF specifies not to use the clock source.
  • ON specifies to use the clock source.
  • 0 specifies not to use the clock source.
  • 1 specifies to use the clock source.

SearchSearchItemTriggerALogicWhen

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:LOGIc:WHEn command.

Description
  • This command sets or queries the condition for generating an A or B logic search with respect to the defined input pattern.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:WHEn? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:WHEn? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:WHEn value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:WHEn {TRUe|FALSe|MOREthan|LESSThan|EQual|UNEQual}
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:WHEn?
Info
  • TRUe searches on an input value that is true.
  • FALSe searches on an input value that is false.
  • MOREthan searches on an input value that is greater than a set value.
  • LESSthan searches on an input value that is less than a set value.
  • EQual searches on an input value that is equal to a set value.
  • UNEQual searches on an input value that is not equal to a set value.

SearchSearchItemTriggerAPulsewidth

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth? query and raise an AssertionError if the returned value does not match value.
Properties
  • .highlimit: The SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:HIGHLimit command.
  • .logicqualification: The SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:LOGICQUALification command.
  • .lowlimit: The SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:LOWLimit command.
  • .polarity: The SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:POLarity command.
  • .source: The SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:SOUrce command.
  • .threshold: The SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:THReshold command.
  • .when: The SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:WHEn command.

highlimit property

Return the SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:HIGHLimit command.

Description
  • This command specifies the upper limit to use, in seconds, when searching for a pulse whose duration is inside or outside a range of two values. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:HIGHLimit? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:HIGHLimit? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:HIGHLimit value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:HIGHLimit <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:HIGHLimit?
Info
  • <NR3> is the upper limit to use, in seconds, when searching for a pulse.

logicqualification property

Return the SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:LOGICQUALification command.

Description
  • This command specifies whether or not to use logic qualification for a pulse width search. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:LOGICQUALification? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:LOGICQUALification? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:LOGICQUALification value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:LOGICQUALification {ON|OFF}
- SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:LOGICQUALification?
Info
  • ON specifies to use logic qualification.
  • OFF specifies not to use logic qualification.

lowlimit property

Return the SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:LOWLimit command.

Description
  • This command specifies the lower limit to use, in seconds, when searching for a pulse whose duration is inside or outside a range of two values. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:LOWLimit? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:LOWLimit? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:LOWLimit value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:LOWLimit <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:LOWLimit?
Info
  • <NR3> is the lower limit to use, in seconds, when searching for a pulse.

polarity property

Return the SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:POLarity command.

Description
  • This command specifies the polarity for a pulse width search. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:POLarity? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:POLarity? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:POLarity value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:POLarity {POSitive|NEGative}
- SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:POLarity?
Info
  • POSitive specifies positive polarity for a pulse width search.
  • NEGative specifies negative polarity for a pulse width search.

source property

Return the SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:SOUrce command.

Description
  • This command sets and queries the source for the pulse width search input. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:SOUrce? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:SOUrce? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:SOUrce value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:SOUrce {CH<x>|CH<x>_D<x>|REF<x>|REF<x>_D<x>}
- SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:SOUrce?
Info
  • CH<x> specifies an analog channel as the search source, where the channel number is specified by x.
  • CH<x>_D<x> specifies a digital reference waveform as the source waveform for the specified search.
  • REF<x> specifies the reference waveform as the search source, where the reference number is specified by x.
  • REF<x>_D<x> specifies a digital reference waveform as the source waveform for the specified search.

threshold property

Return the SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:THReshold command.

Description
  • Sets or queries the source threshold level for a pulse width trigger search to determine where to place a mark. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:THReshold? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:THReshold? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:THReshold value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:THReshold <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:THReshold?
Info
  • <NR3> is the source threshold level for a pulse width trigger search.

when property

Return the SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:WHEn command.

Description
  • This command specifies to search for a pulse with a width (duration) that is less than, greater than, equal to, or unequal to a specified value (set using SEARch:A:PULSEWidth:WIDth ), OR whose SEARch:A:PULSEWidth:LOWLimit and SEARch:A:PULSEWidth:HIGHLimit. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:WHEn? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:WHEn? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:WHEn value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:WHEn {LESSthan|MOREthan|EQual|UNEQual|WIThin|OUTside}
- SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:WHEn?
Info
  • LESSthan causes a search when a pulse is detected with a width less than the time set by the SEARch:A:PULSEWidth:WIDth command.
  • MOREthan causes a search when a pulse is detected with a width greater than the time set by the SEARch:A:PULSEWidth:WIDth command.
  • EQual causes a search when a pulse is detected with a width equal to the time period specified in SEARch:A:PULSEWidth:WIDth within a ±5% tolerance.
  • UNEQual causes a search when a pulse is detected with a width greater than or less than (but not equal) the time period specified in SEARch:A:PULSEWidth:WIDth within a ±5% tolerance.
  • WIThin causes a search when a pulse is detected that is within a range set by two values.
  • OUTside causes a search when a pulse is detected that is outside of a range set by two values.

SearchSearchItemTriggerAPulsewidthHighlimit

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:HIGHLimit command.

Description
  • This command specifies the upper limit to use, in seconds, when searching for a pulse whose duration is inside or outside a range of two values. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:HIGHLimit? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:HIGHLimit? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:HIGHLimit value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:HIGHLimit <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:HIGHLimit?
Info
  • <NR3> is the upper limit to use, in seconds, when searching for a pulse.

SearchSearchItemTriggerAPulsewidthLogicqualification

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:LOGICQUALification command.

Description
  • This command specifies whether or not to use logic qualification for a pulse width search. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:LOGICQUALification? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:LOGICQUALification? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:LOGICQUALification value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:LOGICQUALification {ON|OFF}
- SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:LOGICQUALification?
Info
  • ON specifies to use logic qualification.
  • OFF specifies not to use logic qualification.

SearchSearchItemTriggerAPulsewidthLowlimit

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:LOWLimit command.

Description
  • This command specifies the lower limit to use, in seconds, when searching for a pulse whose duration is inside or outside a range of two values. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:LOWLimit? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:LOWLimit? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:LOWLimit value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:LOWLimit <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:LOWLimit?
Info
  • <NR3> is the lower limit to use, in seconds, when searching for a pulse.

SearchSearchItemTriggerAPulsewidthPolarity

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:POLarity command.

Description
  • This command specifies the polarity for a pulse width search. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:POLarity? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:POLarity? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:POLarity value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:POLarity {POSitive|NEGative}
- SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:POLarity?
Info
  • POSitive specifies positive polarity for a pulse width search.
  • NEGative specifies negative polarity for a pulse width search.

SearchSearchItemTriggerAPulsewidthSource

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:SOUrce command.

Description
  • This command sets and queries the source for the pulse width search input. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:SOUrce? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:SOUrce? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:SOUrce value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:SOUrce {CH<x>|CH<x>_D<x>|REF<x>|REF<x>_D<x>}
- SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:SOUrce?
Info
  • CH<x> specifies an analog channel as the search source, where the channel number is specified by x.
  • CH<x>_D<x> specifies a digital reference waveform as the source waveform for the specified search.
  • REF<x> specifies the reference waveform as the search source, where the reference number is specified by x.
  • REF<x>_D<x> specifies a digital reference waveform as the source waveform for the specified search.

SearchSearchItemTriggerAPulsewidthThreshold

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:THReshold command.

Description
  • Sets or queries the source threshold level for a pulse width trigger search to determine where to place a mark. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:THReshold? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:THReshold? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:THReshold value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:THReshold <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:THReshold?
Info
  • <NR3> is the source threshold level for a pulse width trigger search.

SearchSearchItemTriggerAPulsewidthWhen

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:WHEn command.

Description
  • This command specifies to search for a pulse with a width (duration) that is less than, greater than, equal to, or unequal to a specified value (set using SEARch:A:PULSEWidth:WIDth ), OR whose SEARch:A:PULSEWidth:LOWLimit and SEARch:A:PULSEWidth:HIGHLimit. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:WHEn? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:WHEn? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:WHEn value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:WHEn {LESSthan|MOREthan|EQual|UNEQual|WIThin|OUTside}
- SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:WHEn?
Info
  • LESSthan causes a search when a pulse is detected with a width less than the time set by the SEARch:A:PULSEWidth:WIDth command.
  • MOREthan causes a search when a pulse is detected with a width greater than the time set by the SEARch:A:PULSEWidth:WIDth command.
  • EQual causes a search when a pulse is detected with a width equal to the time period specified in SEARch:A:PULSEWidth:WIDth within a ±5% tolerance.
  • UNEQual causes a search when a pulse is detected with a width greater than or less than (but not equal) the time period specified in SEARch:A:PULSEWidth:WIDth within a ±5% tolerance.
  • WIThin causes a search when a pulse is detected that is within a range set by two values.
  • OUTside causes a search when a pulse is detected that is outside of a range set by two values.

SearchSearchItemTriggerARunt

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:RUNT command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:RUNT? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:RUNT? query and raise an AssertionError if the returned value does not match value.
Properties
  • .logicqualification: The SEARCH:SEARCH<x>:TRIGger:A:RUNT:LOGICQUALification command.
  • .polarity: The SEARCH:SEARCH<x>:TRIGger:A:RUNT:POLarity command.
  • .source: The SEARCH:SEARCH<x>:TRIGger:A:RUNT:SOUrce command.
  • .threshold: The SEARCH:SEARCH<x>:TRIGger:A:RUNT:THReshold command tree.
  • .when: The SEARCH:SEARCH<x>:TRIGger:A:RUNT:WHEn command.
  • .width: The SEARCH:SEARCH<x>:TRIGger:A:RUNT:WIDth command.

logicqualification property

Return the SEARCH:SEARCH<x>:TRIGger:A:RUNT:LOGICQUALification command.

Description
  • This command specifies whether or not to use logic qualification for a runt search. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:RUNT:LOGICQUALification? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:RUNT:LOGICQUALification? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:RUNT:LOGICQUALification value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:RUNT:LOGICQUALification {ON|OFF}
- SEARCH:SEARCH<x>:TRIGger:A:RUNT:LOGICQUALification?
Info
  • ON specifies to use logic qualification for a runt search.
  • OFF specifies not to use logic qualification for a runt search.

polarity property

Return the SEARCH:SEARCH<x>:TRIGger:A:RUNT:POLarity command.

Description
  • This command specifies the polarity for the runt search. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:RUNT:POLarity? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:RUNT:POLarity? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:RUNT:POLarity value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:RUNT:POLarity {POSitive|NEGative|EITher}
- SEARCH:SEARCH<x>:TRIGger:A:RUNT:POLarity?
Info
  • POSitive specifies using positive polarity for the runt search.
  • NEGative specifies using negative polarity for the runt search.
  • EITher specifies using either positive or negative polarity for the runt search.

source property

Return the SEARCH:SEARCH<x>:TRIGger:A:RUNT:SOUrce command.

Description
  • This command sets and queries the source for the Runt search input. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:RUNT:SOUrce? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:RUNT:SOUrce? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:RUNT:SOUrce value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:RUNT:SOUrce {CH<x>|REF<x>}
- SEARCH:SEARCH<x>:TRIGger:A:RUNT:SOUrce?
Info
  • CH<x> specifies an analog channel as the search source, where the channel number is specified by x.
  • REF<x> specifies the reference waveform as the search source, where the reference number is specified by x.

threshold property

Return the SEARCH:SEARCH<x>:TRIGger:A:RUNT:THReshold command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:RUNT:THReshold? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:RUNT:THReshold? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .high: The SEARCH:SEARCH<x>:TRIGger:A:RUNT:THReshold:HIGH command.
  • .low: The SEARCH:SEARCH<x>:TRIGger:A:RUNT:THReshold:LOW command.

when property

Return the SEARCH:SEARCH<x>:TRIGger:A:RUNT:WHEn command.

Description
  • This command sets or queries the condition setting for a runt trigger search to determine where to place a mark. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:RUNT:WHEn? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:RUNT:WHEn? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:RUNT:WHEn value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:RUNT:WHEn {OCCURS|LESSthan|MOREthan|EQual|NOTEQual}
- SEARCH:SEARCH<x>:TRIGger:A:RUNT:WHEn?
Info
  • LESSthan argument sets the instrument to search if the a runt pulse is detected with width less than the time set by the SEARCH:SEARCH<x>:TRIGger:A:RUNT:WIDth command.
  • MOREthan argument sets the instrument to search if the a runt pulse is detected with width more than the time set by the SEARCH:SEARCH<x>:TRIGger:A:RUNT:WIDth command.
  • EQual argument sets the instrument to search when the pattern is true for a time period equal to the time period specified in SEARCH:SEARCH<x>:TRIGger:A:RUNT:WIDth within a ±5% tolerance.
  • NOTEQual argument sets the instrument to search when the pattern is true for atime period greater than or less than (but not equal) the time period specified in SEARCH:SEARCH<x>:TRIGger:A:RUNT:WIDth within a ±5% tolerance.
  • OCCURS argument specifies a search event if a runt of any detectable width occurs.

width property

Return the SEARCH:SEARCH<x>:TRIGger:A:RUNT:WIDth command.

Description
  • This command sets or queries the width setting for a runt trigger search to determine where to place a mark. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:RUNT:WIDth? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:RUNT:WIDth? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:RUNT:WIDth value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:RUNT:WIDth <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:RUNT:WIDth?
Info
  • <NR3> specifies the minimum width in seconds.

SearchSearchItemTriggerARuntLogicqualification

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:RUNT:LOGICQUALification command.

Description
  • This command specifies whether or not to use logic qualification for a runt search. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:RUNT:LOGICQUALification? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:RUNT:LOGICQUALification? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:RUNT:LOGICQUALification value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:RUNT:LOGICQUALification {ON|OFF}
- SEARCH:SEARCH<x>:TRIGger:A:RUNT:LOGICQUALification?
Info
  • ON specifies to use logic qualification for a runt search.
  • OFF specifies not to use logic qualification for a runt search.

SearchSearchItemTriggerARuntPolarity

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:RUNT:POLarity command.

Description
  • This command specifies the polarity for the runt search. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:RUNT:POLarity? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:RUNT:POLarity? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:RUNT:POLarity value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:RUNT:POLarity {POSitive|NEGative|EITher}
- SEARCH:SEARCH<x>:TRIGger:A:RUNT:POLarity?
Info
  • POSitive specifies using positive polarity for the runt search.
  • NEGative specifies using negative polarity for the runt search.
  • EITher specifies using either positive or negative polarity for the runt search.

SearchSearchItemTriggerARuntSource

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:RUNT:SOUrce command.

Description
  • This command sets and queries the source for the Runt search input. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:RUNT:SOUrce? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:RUNT:SOUrce? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:RUNT:SOUrce value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:RUNT:SOUrce {CH<x>|REF<x>}
- SEARCH:SEARCH<x>:TRIGger:A:RUNT:SOUrce?
Info
  • CH<x> specifies an analog channel as the search source, where the channel number is specified by x.
  • REF<x> specifies the reference waveform as the search source, where the reference number is specified by x.

SearchSearchItemTriggerARuntThreshold

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:RUNT:THReshold command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:RUNT:THReshold? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:RUNT:THReshold? query and raise an AssertionError if the returned value does not match value.
Properties
  • .high: The SEARCH:SEARCH<x>:TRIGger:A:RUNT:THReshold:HIGH command.
  • .low: The SEARCH:SEARCH<x>:TRIGger:A:RUNT:THReshold:LOW command.

high property

Return the SEARCH:SEARCH<x>:TRIGger:A:RUNT:THReshold:HIGH command.

Description
  • This command sets or queries the source threshold HIGH level for a runt trigger search to determine where to place a mark.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:RUNT:THReshold:HIGH? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:RUNT:THReshold:HIGH? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:RUNT:THReshold:HIGH value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:RUNT:THReshold:HIGH <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:RUNT:THReshold:HIGH?
Info
  • <NR3> is the source threshold HIGH level for a runt trigger search.

low property

Return the SEARCH:SEARCH<x>:TRIGger:A:RUNT:THReshold:LOW command.

Description
  • Sets or queries the source threshold LOW level for a runt trigger search to determine where to place a mark. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:RUNT:THReshold:LOW? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:RUNT:THReshold:LOW? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:RUNT:THReshold:LOW value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:RUNT:THReshold:LOW <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:RUNT:THReshold:LOW?
Info
  • <NR3> is the source threshold LOW level for a runt trigger search.

SearchSearchItemTriggerARuntThresholdHigh

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:RUNT:THReshold:HIGH command.

Description
  • This command sets or queries the source threshold HIGH level for a runt trigger search to determine where to place a mark.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:RUNT:THReshold:HIGH? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:RUNT:THReshold:HIGH? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:RUNT:THReshold:HIGH value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:RUNT:THReshold:HIGH <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:RUNT:THReshold:HIGH?
Info
  • <NR3> is the source threshold HIGH level for a runt trigger search.

SearchSearchItemTriggerARuntThresholdLow

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:RUNT:THReshold:LOW command.

Description
  • Sets or queries the source threshold LOW level for a runt trigger search to determine where to place a mark. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:RUNT:THReshold:LOW? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:RUNT:THReshold:LOW? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:RUNT:THReshold:LOW value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:RUNT:THReshold:LOW <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:RUNT:THReshold:LOW?
Info
  • <NR3> is the source threshold LOW level for a runt trigger search.

SearchSearchItemTriggerARuntWhen

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:RUNT:WHEn command.

Description
  • This command sets or queries the condition setting for a runt trigger search to determine where to place a mark. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:RUNT:WHEn? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:RUNT:WHEn? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:RUNT:WHEn value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:RUNT:WHEn {OCCURS|LESSthan|MOREthan|EQual|NOTEQual}
- SEARCH:SEARCH<x>:TRIGger:A:RUNT:WHEn?
Info
  • LESSthan argument sets the instrument to search if the a runt pulse is detected with width less than the time set by the SEARCH:SEARCH<x>:TRIGger:A:RUNT:WIDth command.
  • MOREthan argument sets the instrument to search if the a runt pulse is detected with width more than the time set by the SEARCH:SEARCH<x>:TRIGger:A:RUNT:WIDth command.
  • EQual argument sets the instrument to search when the pattern is true for a time period equal to the time period specified in SEARCH:SEARCH<x>:TRIGger:A:RUNT:WIDth within a ±5% tolerance.
  • NOTEQual argument sets the instrument to search when the pattern is true for atime period greater than or less than (but not equal) the time period specified in SEARCH:SEARCH<x>:TRIGger:A:RUNT:WIDth within a ±5% tolerance.
  • OCCURS argument specifies a search event if a runt of any detectable width occurs.

SearchSearchItemTriggerARuntWidth

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:RUNT:WIDth command.

Description
  • This command sets or queries the width setting for a runt trigger search to determine where to place a mark. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:RUNT:WIDth? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:RUNT:WIDth? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:RUNT:WIDth value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:RUNT:WIDth <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:RUNT:WIDth?
Info
  • <NR3> specifies the minimum width in seconds.

SearchSearchItemTriggerASethold

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:SETHold command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold? query and raise an AssertionError if the returned value does not match value.
Properties
  • .clock: The SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk command tree.
  • .holdtime: The SEARCH:SEARCH<x>:TRIGger:A:SETHold:HOLDTime command.
  • .level: The SEARCH:SEARCH<x>:TRIGger:A:SETHold:LEVel command tree.
  • .logicpattern: The SEARCH:SEARCH<x>:TRIGger:A:SETHold:LOGICPattern command tree.
  • .settime: The SEARCH:SEARCH<x>:TRIGger:A:SETHold:SETTime command.

clock property

Return the SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .edge: The SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:EDGE command.
  • .source: The SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:SOUrce command.
  • .threshold: The SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:THReshold command.

holdtime property

Return the SEARCH:SEARCH<x>:TRIGger:A:SETHold:HOLDTime command.

Description
  • This command sets or queries the hold time setting for a setup/hold trigger search to determine where to place a mark. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:HOLDTime? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:HOLDTime? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:HOLDTime value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:SETHold:HOLDTime <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:SETHold:HOLDTime?
Info
  • <NR3> specifies the hold time setting in seconds. Positive values for hold time occur after the clock edge. Negative values occur before the clock edge.

level property

Return the SEARCH:SEARCH<x>:TRIGger:A:SETHold:LEVel command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:LEVel? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:LEVel? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .ch: The SEARCH:SEARCH<x>:TRIGger:A:SETHold:LEVel:CH<x> command.
  • .math: The SEARCH:SEARCH<x>:TRIGger:A:SETHold:LEVel:MATH<x> command.
  • .ref: The SEARCH:SEARCH<x>:TRIGger:A:SETHold:LEVel:REF<x> command.

logicpattern property

Return the SEARCH:SEARCH<x>:TRIGger:A:SETHold:LOGICPattern command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:LOGICPattern? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:LOGICPattern? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .ch: The SEARCH:SEARCH<x>:TRIGger:A:SETHold:LOGICPattern:CH<x> command.
  • .math: The SEARCH:SEARCH<x>:TRIGger:A:SETHold:LOGICPattern:MATH<x> command.
  • .ref: The SEARCH:SEARCH<x>:TRIGger:A:SETHold:LOGICPattern:REF<x> command.

settime property

Return the SEARCH:SEARCH<x>:TRIGger:A:SETHold:SETTime command.

Description
  • This command sets or queries the setup time setting for a setup/hold trigger search to determine where to place a mark. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:SETTime? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:SETTime? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:SETTime value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:SETHold:SETTime <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:SETHold:SETTime?
Info
  • <NR3> specifies the setup time for setup and hold violation triggering.

SearchSearchItemTriggerASetholdClock

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk? query and raise an AssertionError if the returned value does not match value.
Properties
  • .edge: The SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:EDGE command.
  • .source: The SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:SOUrce command.
  • .threshold: The SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:THReshold command.

edge property

Return the SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:EDGE command.

Description
  • This command sets or queries the clock slope setting for a setup/hold trigger search to determine where to place a mark. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:EDGE? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:EDGE? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:EDGE value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:EDGE {FALL|RISe}
- SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:EDGE?
Info
  • FALL specifies the polarity as the clock falling edge.
  • RISe specifies the polarity as the clock rising edge.

source property

Return the SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:SOUrce command.

Description
  • This command sets or queries the clock source setting for a setup/hold trigger search to determine where to place a mark. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:SOUrce? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:SOUrce? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:SOUrce value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:SOUrce {CH<x>|CH<x>_D<x>|MATH<x>|REF<x>|REF<x>_D<x>}
- SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:SOUrce?
Info
  • CH<x> specifies an input channel as the edge source, where = 1, 2, 3, 4, 5, 6, 7, or 8, depending on the number of channels in your instrument.
  • CH<x>_D<x> specifies a digital waveform as the setup and hold clock source waveform for the specified search.
  • MATH<x> specifies the math waveform as the search source, where = ≥1.
  • REF<x> specifies the reference waveform as the search source, where = ≥1.
  • REF<x>_D<x> specifies a digital reference waveform as the setup and hold clock source waveform for the specified search.

threshold property

Return the SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:THReshold command.

Description
  • This command sets or queries the clock threshold setting for a setup/hold trigger search to determine where to place a mark. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:THReshold? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:THReshold? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:THReshold value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:THReshold <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:THReshold?
Info
  • <NR3> the clock threshold setting for a setup/hold trigger search.

SearchSearchItemTriggerASetholdClockEdge

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:EDGE command.

Description
  • This command sets or queries the clock slope setting for a setup/hold trigger search to determine where to place a mark. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:EDGE? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:EDGE? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:EDGE value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:EDGE {FALL|RISe}
- SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:EDGE?
Info
  • FALL specifies the polarity as the clock falling edge.
  • RISe specifies the polarity as the clock rising edge.

SearchSearchItemTriggerASetholdClockSource

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:SOUrce command.

Description
  • This command sets or queries the clock source setting for a setup/hold trigger search to determine where to place a mark. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:SOUrce? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:SOUrce? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:SOUrce value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:SOUrce {CH<x>|CH<x>_D<x>|MATH<x>|REF<x>|REF<x>_D<x>}
- SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:SOUrce?
Info
  • CH<x> specifies an input channel as the edge source, where = 1, 2, 3, 4, 5, 6, 7, or 8, depending on the number of channels in your instrument.
  • CH<x>_D<x> specifies a digital waveform as the setup and hold clock source waveform for the specified search.
  • MATH<x> specifies the math waveform as the search source, where = ≥1.
  • REF<x> specifies the reference waveform as the search source, where = ≥1.
  • REF<x>_D<x> specifies a digital reference waveform as the setup and hold clock source waveform for the specified search.

SearchSearchItemTriggerASetholdClockThreshold

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:THReshold command.

Description
  • This command sets or queries the clock threshold setting for a setup/hold trigger search to determine where to place a mark. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:THReshold? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:THReshold? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:THReshold value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:THReshold <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:THReshold?
Info
  • <NR3> the clock threshold setting for a setup/hold trigger search.

SearchSearchItemTriggerASetholdHoldtime

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:SETHold:HOLDTime command.

Description
  • This command sets or queries the hold time setting for a setup/hold trigger search to determine where to place a mark. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:HOLDTime? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:HOLDTime? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:HOLDTime value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:SETHold:HOLDTime <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:SETHold:HOLDTime?
Info
  • <NR3> specifies the hold time setting in seconds. Positive values for hold time occur after the clock edge. Negative values occur before the clock edge.

SearchSearchItemTriggerASetholdLevel

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:SETHold:LEVel command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:LEVel? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:LEVel? query and raise an AssertionError if the returned value does not match value.
Properties
  • .ch: The SEARCH:SEARCH<x>:TRIGger:A:SETHold:LEVel:CH<x> command.
  • .math: The SEARCH:SEARCH<x>:TRIGger:A:SETHold:LEVel:MATH<x> command.
  • .ref: The SEARCH:SEARCH<x>:TRIGger:A:SETHold:LEVel:REF<x> command.

ch property

Return the SEARCH:SEARCH<x>:TRIGger:A:SETHold:LEVel:CH<x> command.

Description
  • This command sets or queries the voltage level to use for setup & hold trigger search. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:LEVel:CH<x>? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:LEVel:CH<x>? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:LEVel:CH<x> value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:SETHold:LEVel:CH<x> <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:SETHold:LEVel:CH<x>?
Info
  • <NR3> the voltage level to use for setup & hold trigger search.

math property

Return the SEARCH:SEARCH<x>:TRIGger:A:SETHold:LEVel:MATH<x> command.

Description
  • This command sets or queries the voltage level to use for setup & hold trigger search. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:LEVel:MATH<x>? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:LEVel:MATH<x>? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:LEVel:MATH<x> value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:SETHold:LEVel:MATH<x> <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:SETHold:LEVel:MATH<x>?
Info
  • <NR3> isi the voltage level to use for setup & hold trigger search.

ref property

Return the SEARCH:SEARCH<x>:TRIGger:A:SETHold:LEVel:REF<x> command.

Description
  • This command sets or queries the voltage level to use for setup & hold trigger search. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:LEVel:REF<x>? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:LEVel:REF<x>? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:LEVel:REF<x> value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:SETHold:LEVel:REF<x> <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:SETHold:LEVel:REF<x>?
Info
  • <NR3> is the voltage level to use for setup & hold trigger search.

SearchSearchItemTriggerASetholdLevelChannel

Bases: ValidatedChannel, SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:SETHold:LEVel:CH<x> command.

Description
  • This command sets or queries the voltage level to use for setup & hold trigger search. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:LEVel:CH<x>? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:LEVel:CH<x>? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:LEVel:CH<x> value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:SETHold:LEVel:CH<x> <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:SETHold:LEVel:CH<x>?
Info
  • <NR3> the voltage level to use for setup & hold trigger search.

SearchSearchItemTriggerASetholdLevelMathItem

Bases: ValidatedDynamicNumberCmd, SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:SETHold:LEVel:MATH<x> command.

Description
  • This command sets or queries the voltage level to use for setup & hold trigger search. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:LEVel:MATH<x>? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:LEVel:MATH<x>? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:LEVel:MATH<x> value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:SETHold:LEVel:MATH<x> <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:SETHold:LEVel:MATH<x>?
Info
  • <NR3> isi the voltage level to use for setup & hold trigger search.

SearchSearchItemTriggerASetholdLevelRefItem

Bases: ValidatedDynamicNumberCmd, SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:SETHold:LEVel:REF<x> command.

Description
  • This command sets or queries the voltage level to use for setup & hold trigger search. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:LEVel:REF<x>? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:LEVel:REF<x>? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:LEVel:REF<x> value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:SETHold:LEVel:REF<x> <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:SETHold:LEVel:REF<x>?
Info
  • <NR3> is the voltage level to use for setup & hold trigger search.

SearchSearchItemTriggerASetholdLogicpattern

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:SETHold:LOGICPattern command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:LOGICPattern? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:LOGICPattern? query and raise an AssertionError if the returned value does not match value.
Properties
  • .ch: The SEARCH:SEARCH<x>:TRIGger:A:SETHold:LOGICPattern:CH<x> command.
  • .math: The SEARCH:SEARCH<x>:TRIGger:A:SETHold:LOGICPattern:MATH<x> command.
  • .ref: The SEARCH:SEARCH<x>:TRIGger:A:SETHold:LOGICPattern:REF<x> command.

ch property

Return the SEARCH:SEARCH<x>:TRIGger:A:SETHold:LOGICPattern:CH<x> command.

Description
  • This command sets or queries the conditions used for generating an A logic pattern, with respect to the defined input pattern, and identifies the time that the selected pattern may be true and still generate the trigger. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:LOGICPattern:CH<x>? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:LOGICPattern:CH<x>? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:LOGICPattern:CH<x> value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:SETHold:LOGICPattern:CH<x> {INCLude|DONTInclude}
- SEARCH:SEARCH<x>:TRIGger:A:SETHold:LOGICPattern:CH<x>?
Info
  • INCLude specifies including the specified channel SETHOLD inputs in the specified search.
  • DONTInclude specifies not including the specified channel SETHOLD inputs in the specified search.
Sub-properties
  • .d: The SEARCH:SEARCH<x>:TRIGger:A:SETHold:LOGICPattern:CH<x>_D<x> command.

math property

Return the SEARCH:SEARCH<x>:TRIGger:A:SETHold:LOGICPattern:MATH<x> command.

Description
  • This command sets or queries the conditions used for generating an A logic pattern, with respect to the defined input pattern, and identifies the time that the selected pattern may be true and still generate the trigger. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:LOGICPattern:MATH<x>? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:LOGICPattern:MATH<x>? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:LOGICPattern:MATH<x> value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:SETHold:LOGICPattern:MATH<x> {INCLude|DONTInclude}
- SEARCH:SEARCH<x>:TRIGger:A:SETHold:LOGICPattern:MATH<x>?
Info
  • INCLude specifies including the specified math SETHOLD inputs in the specified search.
  • DONTInclude specifies not including the specified math SETHOLD inputs in the specified search.

ref property

Return the SEARCH:SEARCH<x>:TRIGger:A:SETHold:LOGICPattern:REF<x> command.

Description
  • This command sets and returns the conditions used for generating an A logic pattern, with respect to the defined input pattern, and identifies the time that the selected pattern may be true and still generate the trigger. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:LOGICPattern:REF<x>? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:LOGICPattern:REF<x>? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:LOGICPattern:REF<x> value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:SETHold:LOGICPattern:REF<x> {INCLude|DONTInclude}
- SEARCH:SEARCH<x>:TRIGger:A:SETHold:LOGICPattern:REF<x>?
Info
  • INCLude specifies including the specified reference SETHOLD inputs in the specified search.
  • DONTInclude specifies not including the specified reference SETHOLD inputs in the specified search.

SearchSearchItemTriggerASetholdLogicpatternChannel

Bases: ValidatedChannel, SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:SETHold:LOGICPattern:CH<x> command.

Description
  • This command sets or queries the conditions used for generating an A logic pattern, with respect to the defined input pattern, and identifies the time that the selected pattern may be true and still generate the trigger. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:LOGICPattern:CH<x>? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:LOGICPattern:CH<x>? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:LOGICPattern:CH<x> value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:SETHold:LOGICPattern:CH<x> {INCLude|DONTInclude}
- SEARCH:SEARCH<x>:TRIGger:A:SETHold:LOGICPattern:CH<x>?
Info
  • INCLude specifies including the specified channel SETHOLD inputs in the specified search.
  • DONTInclude specifies not including the specified channel SETHOLD inputs in the specified search.
Properties
  • .d: The SEARCH:SEARCH<x>:TRIGger:A:SETHold:LOGICPattern:CH<x>_D<x> command.

d property

Return the SEARCH:SEARCH<x>:TRIGger:A:SETHold:LOGICPattern:CH<x>_D<x> command.

Description
  • This command sets or queries the conditions used for generating an A logic pattern, with respect to the defined input pattern, and identifies the time that the selected pattern may be true and still generate the trigger. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:LOGICPattern:CH<x>_D<x>? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:LOGICPattern:CH<x>_D<x>? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:LOGICPattern:CH<x>_D<x> value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:SETHold:LOGICPattern:CH<x>_D<x> {INCLude|DONTInclude}
- SEARCH:SEARCH<x>:TRIGger:A:SETHold:LOGICPattern:CH<x>_D<x>?
Info
  • INCLude specifies including the specified digital channel SETHOLD inputs in the specified search.
  • DONTInclude specifies not including the specified digital channel SETHOLD inputs in the specified search.

SearchSearchItemTriggerASetholdLogicpatternChannelDigitalBit

Bases: ValidatedDigitalBit, SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:SETHold:LOGICPattern:CH<x>_D<x> command.

Description
  • This command sets or queries the conditions used for generating an A logic pattern, with respect to the defined input pattern, and identifies the time that the selected pattern may be true and still generate the trigger. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:LOGICPattern:CH<x>_D<x>? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:LOGICPattern:CH<x>_D<x>? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:LOGICPattern:CH<x>_D<x> value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:SETHold:LOGICPattern:CH<x>_D<x> {INCLude|DONTInclude}
- SEARCH:SEARCH<x>:TRIGger:A:SETHold:LOGICPattern:CH<x>_D<x>?
Info
  • INCLude specifies including the specified digital channel SETHOLD inputs in the specified search.
  • DONTInclude specifies not including the specified digital channel SETHOLD inputs in the specified search.

SearchSearchItemTriggerASetholdLogicpatternMathItem

Bases: ValidatedDynamicNumberCmd, SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:SETHold:LOGICPattern:MATH<x> command.

Description
  • This command sets or queries the conditions used for generating an A logic pattern, with respect to the defined input pattern, and identifies the time that the selected pattern may be true and still generate the trigger. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:LOGICPattern:MATH<x>? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:LOGICPattern:MATH<x>? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:LOGICPattern:MATH<x> value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:SETHold:LOGICPattern:MATH<x> {INCLude|DONTInclude}
- SEARCH:SEARCH<x>:TRIGger:A:SETHold:LOGICPattern:MATH<x>?
Info
  • INCLude specifies including the specified math SETHOLD inputs in the specified search.
  • DONTInclude specifies not including the specified math SETHOLD inputs in the specified search.

SearchSearchItemTriggerASetholdLogicpatternRefItem

Bases: ValidatedDynamicNumberCmd, SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:SETHold:LOGICPattern:REF<x> command.

Description
  • This command sets and returns the conditions used for generating an A logic pattern, with respect to the defined input pattern, and identifies the time that the selected pattern may be true and still generate the trigger. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:LOGICPattern:REF<x>? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:LOGICPattern:REF<x>? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:LOGICPattern:REF<x> value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:SETHold:LOGICPattern:REF<x> {INCLude|DONTInclude}
- SEARCH:SEARCH<x>:TRIGger:A:SETHold:LOGICPattern:REF<x>?
Info
  • INCLude specifies including the specified reference SETHOLD inputs in the specified search.
  • DONTInclude specifies not including the specified reference SETHOLD inputs in the specified search.

SearchSearchItemTriggerASetholdSettime

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:SETHold:SETTime command.

Description
  • This command sets or queries the setup time setting for a setup/hold trigger search to determine where to place a mark. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:SETTime? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:SETTime? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:SETTime value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:SETHold:SETTime <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:SETHold:SETTime?
Info
  • <NR3> specifies the setup time for setup and hold violation triggering.

SearchSearchItemTriggerAState

Bases: SCPICmdWrite

The SEARCH:SEARCH<x>:TRIGger:A:STATE command.

Description
  • This command sets or queries the enabled state of the search. The search number is specified by x.
Usage
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:STATE value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:STATE {ON|OFF|<NR1>}
Info
  • <NR1> = 1 enables the search. Any other character disables the search.
  • ON enables the search.
  • OFF disables the search.

SearchSearchItemTriggerAStopacq

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:STOPAcq command.

Description
  • This command sets or queries whether acquisitions are stopped when a search hit is found. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:STOPAcq? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:STOPAcq? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:STOPAcq value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:STOPAcq {ON|OFF|<NR1>}
- SEARCH:SEARCH<x>:TRIGger:A:STOPAcq?
Info
  • <x> is the number of the search on which to enable or disable the stop acquisition function.
  • <NR1> = 1 enables stopping when a search hit is found. Any other character disables the feature.
  • ON enables stopping when a search hit is found.
  • OFF disables stopping on a search hit.

SearchSearchItemTriggerATimeout

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:TIMEOut command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:TIMEOut? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:TIMEOut? query and raise an AssertionError if the returned value does not match value.
Properties
  • .logicqualification: The SEARCH:SEARCH<x>:TRIGger:A:TIMEOut:LOGICQUALification command.
  • .polarity: The SEARCH:SEARCH<x>:TRIGger:A:TIMEOut:POLarity command.
  • .source: The SEARCH:SEARCH<x>:TRIGger:A:TIMEOut:SOUrce command.
  • .threshold: The SEARCH:SEARCH<x>:TRIGger:A:TIMEOut:THReshold command.
  • .time: The SEARCH:SEARCH<x>:TRIGger:A:TIMEOut:TIMe command.

logicqualification property

Return the SEARCH:SEARCH<x>:TRIGger:A:TIMEOut:LOGICQUALification command.

Description
  • This command specifies whether or not to use logic qualification for a timeout search. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:TIMEOut:LOGICQUALification? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:TIMEOut:LOGICQUALification? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:TIMEOut:LOGICQUALification value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:TIMEOut:LOGICQUALification {ON|OFF}
- SEARCH:SEARCH<x>:TRIGger:A:TIMEOut:LOGICQUALification?
Info
  • ON specifies to use logic qualification.
  • OFF specifies not to use logic qualification.

polarity property

Return the SEARCH:SEARCH<x>:TRIGger:A:TIMEOut:POLarity command.

Description
  • The polarity to be used for a Timeout search. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:TIMEOut:POLarity? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:TIMEOut:POLarity? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:TIMEOut:POLarity value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:TIMEOut:POLarity {STAYSHigh|STAYSLow|EITher}
- SEARCH:SEARCH<x>:TRIGger:A:TIMEOut:POLarity?
Info
  • STAYSHigh specifies the polarity stays HIGH.
  • STAYSLow specifies the polarity stays LOW.
  • EITher specifies the polarity stays HIGH or stays LOW.

source property

Return the SEARCH:SEARCH<x>:TRIGger:A:TIMEOut:SOUrce command.

Description
  • This command sets and queries the source for timeout search input. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:TIMEOut:SOUrce? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:TIMEOut:SOUrce? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:TIMEOut:SOUrce value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:TIMEOut:SOUrce {CH<x>|CH<x>_D<x>|MATH<x>|REF<x>|REF<x>_D<x>}
- SEARCH:SEARCH<x>:TRIGger:A:TIMEOut:SOUrce?
Info
  • CH<x> specifies an analog channel as the search source, where the channel number is specified by x.
  • CH<x>_D<x> specifies a digital reference waveform as the source waveform for the specified search.
  • MATH<x> specifies the math waveform as the search source, where the math number is specified by x.
  • REF<x> specifies the reference waveform as the search source, where the reference number is specified by x.
  • REF<x>_D<x> specifies a digital reference waveform as the source waveform for the specified search.

threshold property

Return the SEARCH:SEARCH<x>:TRIGger:A:TIMEOut:THReshold command.

Description
  • Sets or queries the source threshold level for a timeout trigger search to determine where to place a mark. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:TIMEOut:THReshold? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:TIMEOut:THReshold? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:TIMEOut:THReshold value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:TIMEOut:THReshold <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:TIMEOut:THReshold?
Info
  • <NR3> is the source threshold level for a timeout trigger search.

time property

Return the SEARCH:SEARCH<x>:TRIGger:A:TIMEOut:TIMe command.

Description
  • This command sets or queries the time setting for a timeout trigger search to determine where to place a mark. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:TIMEOut:TIMe? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:TIMEOut:TIMe? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:TIMEOut:TIMe value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:TIMEOut:TIMe <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:TIMEOut:TIMe?
Info
  • <NR3> is the time in seconds.

SearchSearchItemTriggerATimeoutLogicqualification

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:TIMEOut:LOGICQUALification command.

Description
  • This command specifies whether or not to use logic qualification for a timeout search. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:TIMEOut:LOGICQUALification? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:TIMEOut:LOGICQUALification? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:TIMEOut:LOGICQUALification value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:TIMEOut:LOGICQUALification {ON|OFF}
- SEARCH:SEARCH<x>:TRIGger:A:TIMEOut:LOGICQUALification?
Info
  • ON specifies to use logic qualification.
  • OFF specifies not to use logic qualification.

SearchSearchItemTriggerATimeoutPolarity

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:TIMEOut:POLarity command.

Description
  • The polarity to be used for a Timeout search. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:TIMEOut:POLarity? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:TIMEOut:POLarity? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:TIMEOut:POLarity value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:TIMEOut:POLarity {STAYSHigh|STAYSLow|EITher}
- SEARCH:SEARCH<x>:TRIGger:A:TIMEOut:POLarity?
Info
  • STAYSHigh specifies the polarity stays HIGH.
  • STAYSLow specifies the polarity stays LOW.
  • EITher specifies the polarity stays HIGH or stays LOW.

SearchSearchItemTriggerATimeoutSource

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:TIMEOut:SOUrce command.

Description
  • This command sets and queries the source for timeout search input. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:TIMEOut:SOUrce? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:TIMEOut:SOUrce? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:TIMEOut:SOUrce value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:TIMEOut:SOUrce {CH<x>|CH<x>_D<x>|MATH<x>|REF<x>|REF<x>_D<x>}
- SEARCH:SEARCH<x>:TRIGger:A:TIMEOut:SOUrce?
Info
  • CH<x> specifies an analog channel as the search source, where the channel number is specified by x.
  • CH<x>_D<x> specifies a digital reference waveform as the source waveform for the specified search.
  • MATH<x> specifies the math waveform as the search source, where the math number is specified by x.
  • REF<x> specifies the reference waveform as the search source, where the reference number is specified by x.
  • REF<x>_D<x> specifies a digital reference waveform as the source waveform for the specified search.

SearchSearchItemTriggerATimeoutThreshold

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:TIMEOut:THReshold command.

Description
  • Sets or queries the source threshold level for a timeout trigger search to determine where to place a mark. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:TIMEOut:THReshold? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:TIMEOut:THReshold? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:TIMEOut:THReshold value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:TIMEOut:THReshold <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:TIMEOut:THReshold?
Info
  • <NR3> is the source threshold level for a timeout trigger search.

SearchSearchItemTriggerATimeoutTime

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:TIMEOut:TIMe command.

Description
  • This command sets or queries the time setting for a timeout trigger search to determine where to place a mark. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:TIMEOut:TIMe? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:TIMEOut:TIMe? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:TIMEOut:TIMe value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:TIMEOut:TIMe <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:TIMEOut:TIMe?
Info
  • <NR3> is the time in seconds.

SearchSearchItemTriggerATransition

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:TRANsition command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:TRANsition? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:TRANsition? query and raise an AssertionError if the returned value does not match value.
Properties
  • .deltatime: The SEARCH:SEARCH<x>:TRIGger:A:TRANsition:DELTATime command.
  • .logicqualification: The SEARCH:SEARCH<x>:TRIGger:A:TRANsition:LOGICQUALification command.
  • .polarity: The SEARCH:SEARCH<x>:TRIGger:A:TRANsition:POLarity command.
  • .source: The SEARCH:SEARCH<x>:TRIGger:A:TRANsition:SOUrce command.
  • .threshold: The SEARCH:SEARCH<x>:TRIGger:A:TRANsition:THReshold command tree.
  • .when: The SEARCH:SEARCH<x>:TRIGger:A:TRANsition:WHEn command.

deltatime property

Return the SEARCH:SEARCH<x>:TRIGger:A:TRANsition:DELTATime command.

Description
  • This command sets or queries the transition time setting for a transition trigger search to determine where to place a mark. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:TRANsition:DELTATime? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:TRANsition:DELTATime? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:TRANsition:DELTATime value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:TRANsition:DELTATime <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:TRANsition:DELTATime?
Info
  • <NR3> specifies the transition time in seconds.

logicqualification property

Return the SEARCH:SEARCH<x>:TRIGger:A:TRANsition:LOGICQUALification command.

Description
  • This command specifies whether or not to use logic qualification for a transition search. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:TRANsition:LOGICQUALification? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:TRANsition:LOGICQUALification? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:TRANsition:LOGICQUALification value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:TRANsition:LOGICQUALification {ON|OFF}
- SEARCH:SEARCH<x>:TRIGger:A:TRANsition:LOGICQUALification?
Info
  • ON specifies to use logic qualification for a transition search.
  • OFF specifies not to use logic qualification for a transition search.

polarity property

Return the SEARCH:SEARCH<x>:TRIGger:A:TRANsition:POLarity command.

Description
  • This command specifies the polarity for the transition search. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:TRANsition:POLarity? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:TRANsition:POLarity? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:TRANsition:POLarity value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:TRANsition:POLarity {POSitive|NEGative|EITher}
- SEARCH:SEARCH<x>:TRIGger:A:TRANsition:POLarity?
Info
  • EITher places a mark on a transition of either polarity.
  • NEGative places a mark on a transition of negative polarity.
  • POSitive places a mark on a transition of positive polarity.

source property

Return the SEARCH:SEARCH<x>:TRIGger:A:TRANsition:SOUrce command.

Description
  • This command sets and queries the source for the transition search input. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:TRANsition:SOUrce? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:TRANsition:SOUrce? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:TRANsition:SOUrce value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:TRANsition:SOUrce {CH<x>|MATH<x>|REF<x>}
- SEARCH:SEARCH<x>:TRIGger:A:TRANsition:SOUrce?
Info
  • CH<x> specifies an analog channel as the search source, where the channel number is specified by x.
  • MATH<x> specifies the math waveform as the search source, where the math number is specified by x.
  • REF<x> specifies the reference waveform as the search source, where the reference number is specified by x.

threshold property

Return the SEARCH:SEARCH<x>:TRIGger:A:TRANsition:THReshold command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:TRANsition:THReshold? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:TRANsition:THReshold? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .high: The SEARCH:SEARCH<x>:TRIGger:A:TRANsition:THReshold:HIGH command.
  • .low: The SEARCH:SEARCH<x>:TRIGger:A:TRANsition:THReshold:LOW command.

when property

Return the SEARCH:SEARCH<x>:TRIGger:A:TRANsition:WHEn command.

Description
  • This command sets or queries the condition setting for a transition trigger search to determine where to place a mark. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:TRANsition:WHEn? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:TRANsition:WHEn? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:TRANsition:WHEn value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:TRANsition:WHEn {FASTERthan|SLOWERthan|EQual|UNEQual}
- SEARCH:SEARCH<x>:TRIGger:A:TRANsition:WHEn?
Info
  • FASTERthan sets the trigger to occur when the transitioning signal is faster than the set volts/second rate.
  • SLOWERthan sets the trigger to occur when the transitioning signal is slower than the set volts/second rate.
  • EQual sets the trigger to occur when the transitioning signal is equal to the set volts/second rate.
  • UNEQual sets the trigger to occur when the transitioning signal is not equal to the set volts/second rate.

SearchSearchItemTriggerATransitionDeltatime

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:TRANsition:DELTATime command.

Description
  • This command sets or queries the transition time setting for a transition trigger search to determine where to place a mark. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:TRANsition:DELTATime? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:TRANsition:DELTATime? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:TRANsition:DELTATime value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:TRANsition:DELTATime <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:TRANsition:DELTATime?
Info
  • <NR3> specifies the transition time in seconds.

SearchSearchItemTriggerATransitionLogicqualification

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:TRANsition:LOGICQUALification command.

Description
  • This command specifies whether or not to use logic qualification for a transition search. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:TRANsition:LOGICQUALification? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:TRANsition:LOGICQUALification? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:TRANsition:LOGICQUALification value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:TRANsition:LOGICQUALification {ON|OFF}
- SEARCH:SEARCH<x>:TRIGger:A:TRANsition:LOGICQUALification?
Info
  • ON specifies to use logic qualification for a transition search.
  • OFF specifies not to use logic qualification for a transition search.

SearchSearchItemTriggerATransitionPolarity

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:TRANsition:POLarity command.

Description
  • This command specifies the polarity for the transition search. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:TRANsition:POLarity? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:TRANsition:POLarity? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:TRANsition:POLarity value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:TRANsition:POLarity {POSitive|NEGative|EITher}
- SEARCH:SEARCH<x>:TRIGger:A:TRANsition:POLarity?
Info
  • EITher places a mark on a transition of either polarity.
  • NEGative places a mark on a transition of negative polarity.
  • POSitive places a mark on a transition of positive polarity.

SearchSearchItemTriggerATransitionSource

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:TRANsition:SOUrce command.

Description
  • This command sets and queries the source for the transition search input. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:TRANsition:SOUrce? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:TRANsition:SOUrce? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:TRANsition:SOUrce value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:TRANsition:SOUrce {CH<x>|MATH<x>|REF<x>}
- SEARCH:SEARCH<x>:TRIGger:A:TRANsition:SOUrce?
Info
  • CH<x> specifies an analog channel as the search source, where the channel number is specified by x.
  • MATH<x> specifies the math waveform as the search source, where the math number is specified by x.
  • REF<x> specifies the reference waveform as the search source, where the reference number is specified by x.

SearchSearchItemTriggerATransitionThreshold

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:TRANsition:THReshold command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:TRANsition:THReshold? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:TRANsition:THReshold? query and raise an AssertionError if the returned value does not match value.
Properties
  • .high: The SEARCH:SEARCH<x>:TRIGger:A:TRANsition:THReshold:HIGH command.
  • .low: The SEARCH:SEARCH<x>:TRIGger:A:TRANsition:THReshold:LOW command.

high property

Return the SEARCH:SEARCH<x>:TRIGger:A:TRANsition:THReshold:HIGH command.

Description
  • Sets or queries the source threshold HIGH level for a transition trigger search to determine where to place a mark. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:TRANsition:THReshold:HIGH? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:TRANsition:THReshold:HIGH? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:TRANsition:THReshold:HIGH value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:TRANsition:THReshold:HIGH <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:TRANsition:THReshold:HIGH?
Info
  • <NR3> the source threshold HIGH level for a transition trigger search.

low property

Return the SEARCH:SEARCH<x>:TRIGger:A:TRANsition:THReshold:LOW command.

Description
  • Sets or queries the source threshold LOW level for a transition trigger search to determine where to place a mark. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:TRANsition:THReshold:LOW? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:TRANsition:THReshold:LOW? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:TRANsition:THReshold:LOW value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:TRANsition:THReshold:LOW <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:TRANsition:THReshold:LOW?
Info
  • <NR3> is the source threshold LOW level for a transition trigger searchk.

SearchSearchItemTriggerATransitionThresholdHigh

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:TRANsition:THReshold:HIGH command.

Description
  • Sets or queries the source threshold HIGH level for a transition trigger search to determine where to place a mark. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:TRANsition:THReshold:HIGH? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:TRANsition:THReshold:HIGH? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:TRANsition:THReshold:HIGH value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:TRANsition:THReshold:HIGH <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:TRANsition:THReshold:HIGH?
Info
  • <NR3> the source threshold HIGH level for a transition trigger search.

SearchSearchItemTriggerATransitionThresholdLow

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:TRANsition:THReshold:LOW command.

Description
  • Sets or queries the source threshold LOW level for a transition trigger search to determine where to place a mark. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:TRANsition:THReshold:LOW? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:TRANsition:THReshold:LOW? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:TRANsition:THReshold:LOW value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:TRANsition:THReshold:LOW <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:TRANsition:THReshold:LOW?
Info
  • <NR3> is the source threshold LOW level for a transition trigger searchk.

SearchSearchItemTriggerATransitionWhen

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:TRANsition:WHEn command.

Description
  • This command sets or queries the condition setting for a transition trigger search to determine where to place a mark. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:TRANsition:WHEn? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:TRANsition:WHEn? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:TRANsition:WHEn value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:TRANsition:WHEn {FASTERthan|SLOWERthan|EQual|UNEQual}
- SEARCH:SEARCH<x>:TRIGger:A:TRANsition:WHEn?
Info
  • FASTERthan sets the trigger to occur when the transitioning signal is faster than the set volts/second rate.
  • SLOWERthan sets the trigger to occur when the transitioning signal is slower than the set volts/second rate.
  • EQual sets the trigger to occur when the transitioning signal is equal to the set volts/second rate.
  • UNEQual sets the trigger to occur when the transitioning signal is not equal to the set volts/second rate.

SearchSearchItemTriggerAType

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:TYPe command.

Description
  • This command sets or queries the trigger type setting for a search to determine where to place a mark. The search number is specified by x. Note: Some trigger types are optional.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:TYPe? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:TYPe? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:TYPe value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:TYPe {EDGE|RUNT|TRANsition|PULSEWidth|TIMEOut|LOGIc|SETHold|WINdow|Bus}
- SEARCH:SEARCH<x>:TRIGger:A:TYPe?
Info
  • EDGE triggers when the source input signal amplitude crosses the specified level in the direction given by the slope.
  • RUNT triggers when a pulse crosses the first preset voltage threshold but does not cross the second preset threshold before recrossing the first. The thresholds are set with the SEARCH:SEARCH<x>:TRIGger:A:RUNt:HIGH and SEARCH:SEARCH<x>:TRIGger:A:RUNt:LOW THRESHOLD commands.
  • TRANsition triggers when a pulse crosses both thresholds in the same direction as the specified polarity and the transition time between the two threshold crossings is greater or less than the specified time delta.
  • PULSEWidth triggers on input signal source pulses that are inside or outside of the given time range specified by SEARCH:SEARCH<x>:TRIGger:A:LOGIc:PATtern:WHEn:LESSLimit and SEARCH:SEARCH<x>:TRIGger:A:LOGIc:PATtern:WHEn:MORELimit. The polarity is selected using the SEARCH:SEARCH<x>:TRIGger:A:RUNT: POLarity command.
  • TIMEOut triggers on an input signal source that stays above, stays below, or stays either above or beow the trigger level for a given time.
  • LOGIc specifies that a search occurs when specified conditions are met, and is controlled by the SEARCH:A:LOGIc commands.
  • SETHold triggers on a functional pattern combination of one to three data sources at the time of the clock transition.
  • WINdow triggers on an input signal source that enters or exits the horizontal band defined by the two trigger levels.
  • Bus specifies that a search occurs when a communications signal is found.

SearchSearchItemTriggerAWindow

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:WINdow command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:WINdow? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:WINdow? query and raise an AssertionError if the returned value does not match value.
Properties
  • .crossing: The SEARCH:SEARCH<x>:TRIGger:A:WINdow:CROSSIng command.
  • .logicqualification: The SEARCH:SEARCH<x>:TRIGger:A:WINdow:LOGICQUALification command.
  • .polarity: The SEARCH:SEARCH<x>:TRIGger:A:WINdow:POLarity command.
  • .source: The SEARCH:SEARCH<x>:TRIGger:A:WINdow:SOUrce command.
  • .threshold: The SEARCH:SEARCH<x>:TRIGger:A:WINdow:THReshold command tree.
  • .when: The SEARCH:SEARCH<x>:TRIGger:A:WINdow:WHEn command.
  • .width: The SEARCH:SEARCH<x>:TRIGger:A:WINdow:WIDth command.

crossing property

Return the SEARCH:SEARCH<x>:TRIGger:A:WINdow:CROSSIng command.

Description
  • This command sets or queries the window trigger threshold crossing of the selected trigger Source. The threshold crossing selection is only effective when :TRIGger:A:WINdow:WHEn is INSIDEGreater or OUTSIDEGreater. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:WINdow:CROSSIng? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:WINdow:CROSSIng? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:WINdow:CROSSIng value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:WINdow:CROSSIng {UPPer|LOWer|EITher|NONe}
- SEARCH:SEARCH<x>:TRIGger:A:WINdow:CROSSIng?
Info
  • UPPer if :TRIGger:A:WINdow:WHEn is INSIDEGreater, the instrument triggers when the signal remains between the upper and lower thresholds for longer than the time limit (:TRIGger:A:WINdow:WIDTH) and then exits through the upper threshold. If :TRIGger:A:WINdow:WHEn is OUTSIDEGreater, the instrument triggers when the signal remains above the upper threshold for longer than the time limit (:TRIGger:A:WINdow:WIDTH) and then crosses downward through the upper threshold.
  • LOWer if :TRIGger:A:WINdow:WHEn is INSIDEGreater, the instrument triggers when the signal remains between the upper and lower thresholds for longer than the time limit (:TRIGger:A:WINdow:WIDTH) and then exits through the lower threshold. If :TRIGger:A:WINdow:WHEn is OUTSIDEGreater, the instrument triggers when the signal remains below the lower threshold for longer than the time limit (:TRIGger:A:WINdow:WIDTH) and then crosses upwards through the lower threshold.
  • EITher if :TRIGger:A:WINdow:WHEn is INSIDEGreater, the instrument triggers when the signal remains between the upper and lower thresholds for longer than the time limit (:TRIGger:A:WINdow:WIDTH) and then exits through either the upper or lower threshold. If :TRIGger:A:WINdow:WHEn is OUTSIDEGreater, the instrument triggers when the signal remains either above the upper threshold or below the lower threshold for longer than the time limit (:TRIGger:A:WINdow:WIDTH) and then crosses a threshold.
  • NONe if :TRIGger:A:WINdow:WHEn is INSIDEGreater, the instrument triggers when the signal remains between the upper and lower thresholds for longer than the time limit (:TRIGger:A:WINdow:WIDTH) without crossing through either the upper or lower threshold. If :TRIGger:A:WINdow:WHEn is OUTSIDEGreater, the instrument triggers when the signal remains outside the upper and lower thresholds for longer than the time limit (:TRIGger:A:WINdow:WIDTH) without crossing through either the upper or lower threshold.

logicqualification property

Return the SEARCH:SEARCH<x>:TRIGger:A:WINdow:LOGICQUALification command.

Description
  • This command specifies or queries whether or not to use logic qualification for a window search. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:WINdow:LOGICQUALification? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:WINdow:LOGICQUALification? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:WINdow:LOGICQUALification value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:WINdow:LOGICQUALification {ON|OFF}
- SEARCH:SEARCH<x>:TRIGger:A:WINdow:LOGICQUALification?
Info
  • ON specifies to use logic qualification for a window search.
  • OFF specifies not to us logic qualification for a window search.

polarity property

Return the SEARCH:SEARCH<x>:TRIGger:A:WINdow:POLarity command.

Description
  • This command sets or queries the window trigger threshold crossing of the selected trigger Source. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:WINdow:POLarity? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:WINdow:POLarity? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:WINdow:POLarity value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:WINdow:POLarity {UPPer|LOWer|EITher|NONe}
- SEARCH:SEARCH<x>:TRIGger:A:WINdow:POLarity?
Info
  • UPPer specifies that the instrument triggers when the signal remains above the upper threshold for longer than the time limit and then crosses downward through the upper threshold.
  • LOWer specifies that the instrument triggers when the signal remains below the lower threshold for longer than the time limit and then crosses upwards through the lower threshold.
  • EITher specifies that the instrument triggers when the signal remains either above the upper threshold or below the lower threshold for longer than the time limit and then crosses a threshold.
  • NONe specifies that the instrument triggers when the signal remains outside the upper and lower thresholds for longer than the time limit without crossing through either the upper or lower threshold.

source property

Return the SEARCH:SEARCH<x>:TRIGger:A:WINdow:SOUrce command.

Description
  • This command sets and queries the source for the window search input. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:WINdow:SOUrce? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:WINdow:SOUrce? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:WINdow:SOUrce value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:WINdow:SOUrce {CH<x>|MATH<x>|REF<x>}
- SEARCH:SEARCH<x>:TRIGger:A:WINdow:SOUrce?
Info
  • CH<x> specifies an analog channel as the search source, where the channel number is specified by x.
  • MATH<x> specifies the math waveform as the search source, where the math number is specified by x.
  • REF<x> specifies the reference waveform as the search source, where the reference number is specified by x.

threshold property

Return the SEARCH:SEARCH<x>:TRIGger:A:WINdow:THReshold command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:WINdow:THReshold? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:WINdow:THReshold? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .high: The SEARCH:SEARCH<x>:TRIGger:A:WINdow:THReshold:HIGH command.
  • .low: The SEARCH:SEARCH<x>:TRIGger:A:WINdow:THReshold:LOW command.

when property

Return the SEARCH:SEARCH<x>:TRIGger:A:WINdow:WHEn command.

Description
  • This command sets or queries the window search event. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:WINdow:WHEn? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:WINdow:WHEn? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:WINdow:WHEn value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:WINdow:WHEn {ENTERSWindow|EXITSWindow|INSIDEGreater|OUTSIDEGreater}
- SEARCH:SEARCH<x>:TRIGger:A:WINdow:WHEn?
Info
  • ENTERSWindow specifies a window search when the signal enters the window.
  • EXITSWindow specifies a window search when the signal exits the window.
  • OUTSIDEGreater specifies a search when the signal leaves the window defined by the threshold levels for the time specified by Width.
  • INSIDEGreater specifies a search when the signal enters the window defined by the threshold levels for the time specified by Width.

width property

Return the SEARCH:SEARCH<x>:TRIGger:A:WINdow:WIDth command.

Description
  • This command sets or queries the width setting for a window trigger search to determine where to place a mark. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:WINdow:WIDth? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:WINdow:WIDth? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:WINdow:WIDth value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:WINdow:WIDth <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:WINdow:WIDth?
Info
  • <NR3> specifies the minimum width in seconds.
  • ECL specifies a preset high level of -1.3 V and TTL specifies a preset high level of +1.4V.

SearchSearchItemTriggerAWindowCrossing

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:WINdow:CROSSIng command.

Description
  • This command sets or queries the window trigger threshold crossing of the selected trigger Source. The threshold crossing selection is only effective when :TRIGger:A:WINdow:WHEn is INSIDEGreater or OUTSIDEGreater. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:WINdow:CROSSIng? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:WINdow:CROSSIng? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:WINdow:CROSSIng value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:WINdow:CROSSIng {UPPer|LOWer|EITher|NONe}
- SEARCH:SEARCH<x>:TRIGger:A:WINdow:CROSSIng?
Info
  • UPPer if :TRIGger:A:WINdow:WHEn is INSIDEGreater, the instrument triggers when the signal remains between the upper and lower thresholds for longer than the time limit (:TRIGger:A:WINdow:WIDTH) and then exits through the upper threshold. If :TRIGger:A:WINdow:WHEn is OUTSIDEGreater, the instrument triggers when the signal remains above the upper threshold for longer than the time limit (:TRIGger:A:WINdow:WIDTH) and then crosses downward through the upper threshold.
  • LOWer if :TRIGger:A:WINdow:WHEn is INSIDEGreater, the instrument triggers when the signal remains between the upper and lower thresholds for longer than the time limit (:TRIGger:A:WINdow:WIDTH) and then exits through the lower threshold. If :TRIGger:A:WINdow:WHEn is OUTSIDEGreater, the instrument triggers when the signal remains below the lower threshold for longer than the time limit (:TRIGger:A:WINdow:WIDTH) and then crosses upwards through the lower threshold.
  • EITher if :TRIGger:A:WINdow:WHEn is INSIDEGreater, the instrument triggers when the signal remains between the upper and lower thresholds for longer than the time limit (:TRIGger:A:WINdow:WIDTH) and then exits through either the upper or lower threshold. If :TRIGger:A:WINdow:WHEn is OUTSIDEGreater, the instrument triggers when the signal remains either above the upper threshold or below the lower threshold for longer than the time limit (:TRIGger:A:WINdow:WIDTH) and then crosses a threshold.
  • NONe if :TRIGger:A:WINdow:WHEn is INSIDEGreater, the instrument triggers when the signal remains between the upper and lower thresholds for longer than the time limit (:TRIGger:A:WINdow:WIDTH) without crossing through either the upper or lower threshold. If :TRIGger:A:WINdow:WHEn is OUTSIDEGreater, the instrument triggers when the signal remains outside the upper and lower thresholds for longer than the time limit (:TRIGger:A:WINdow:WIDTH) without crossing through either the upper or lower threshold.

SearchSearchItemTriggerAWindowLogicqualification

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:WINdow:LOGICQUALification command.

Description
  • This command specifies or queries whether or not to use logic qualification for a window search. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:WINdow:LOGICQUALification? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:WINdow:LOGICQUALification? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:WINdow:LOGICQUALification value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:WINdow:LOGICQUALification {ON|OFF}
- SEARCH:SEARCH<x>:TRIGger:A:WINdow:LOGICQUALification?
Info
  • ON specifies to use logic qualification for a window search.
  • OFF specifies not to us logic qualification for a window search.

SearchSearchItemTriggerAWindowPolarity

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:WINdow:POLarity command.

Description
  • This command sets or queries the window trigger threshold crossing of the selected trigger Source. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:WINdow:POLarity? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:WINdow:POLarity? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:WINdow:POLarity value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:WINdow:POLarity {UPPer|LOWer|EITher|NONe}
- SEARCH:SEARCH<x>:TRIGger:A:WINdow:POLarity?
Info
  • UPPer specifies that the instrument triggers when the signal remains above the upper threshold for longer than the time limit and then crosses downward through the upper threshold.
  • LOWer specifies that the instrument triggers when the signal remains below the lower threshold for longer than the time limit and then crosses upwards through the lower threshold.
  • EITher specifies that the instrument triggers when the signal remains either above the upper threshold or below the lower threshold for longer than the time limit and then crosses a threshold.
  • NONe specifies that the instrument triggers when the signal remains outside the upper and lower thresholds for longer than the time limit without crossing through either the upper or lower threshold.

SearchSearchItemTriggerAWindowSource

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:WINdow:SOUrce command.

Description
  • This command sets and queries the source for the window search input. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:WINdow:SOUrce? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:WINdow:SOUrce? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:WINdow:SOUrce value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:WINdow:SOUrce {CH<x>|MATH<x>|REF<x>}
- SEARCH:SEARCH<x>:TRIGger:A:WINdow:SOUrce?
Info
  • CH<x> specifies an analog channel as the search source, where the channel number is specified by x.
  • MATH<x> specifies the math waveform as the search source, where the math number is specified by x.
  • REF<x> specifies the reference waveform as the search source, where the reference number is specified by x.

SearchSearchItemTriggerAWindowThreshold

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:WINdow:THReshold command tree.

Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:WINdow:THReshold? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:WINdow:THReshold? query and raise an AssertionError if the returned value does not match value.
Properties
  • .high: The SEARCH:SEARCH<x>:TRIGger:A:WINdow:THReshold:HIGH command.
  • .low: The SEARCH:SEARCH<x>:TRIGger:A:WINdow:THReshold:LOW command.

high property

Return the SEARCH:SEARCH<x>:TRIGger:A:WINdow:THReshold:HIGH command.

Description
  • This command sets or queries the source threshold HIGH level for a transition trigger search to determine where to place a mark. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:WINdow:THReshold:HIGH? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:WINdow:THReshold:HIGH? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:WINdow:THReshold:HIGH value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:WINdow:THReshold:HIGH <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:WINdow:THReshold:HIGH?
Info
  • <NR3> is the source threshold HIGH level for a transition trigger search.

low property

Return the SEARCH:SEARCH<x>:TRIGger:A:WINdow:THReshold:LOW command.

Description
  • This command sets or queries the source threshold LOW level for a transition trigger search to determine where to place a mark. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:WINdow:THReshold:LOW? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:WINdow:THReshold:LOW? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:WINdow:THReshold:LOW value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:WINdow:THReshold:LOW <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:WINdow:THReshold:LOW?
Info
  • <NR3> the source threshold LOW level for a transition trigger search.

SearchSearchItemTriggerAWindowThresholdHigh

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:WINdow:THReshold:HIGH command.

Description
  • This command sets or queries the source threshold HIGH level for a transition trigger search to determine where to place a mark. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:WINdow:THReshold:HIGH? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:WINdow:THReshold:HIGH? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:WINdow:THReshold:HIGH value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:WINdow:THReshold:HIGH <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:WINdow:THReshold:HIGH?
Info
  • <NR3> is the source threshold HIGH level for a transition trigger search.

SearchSearchItemTriggerAWindowThresholdLow

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:WINdow:THReshold:LOW command.

Description
  • This command sets or queries the source threshold LOW level for a transition trigger search to determine where to place a mark. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:WINdow:THReshold:LOW? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:WINdow:THReshold:LOW? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:WINdow:THReshold:LOW value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:WINdow:THReshold:LOW <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:WINdow:THReshold:LOW?
Info
  • <NR3> the source threshold LOW level for a transition trigger search.

SearchSearchItemTriggerAWindowWhen

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:WINdow:WHEn command.

Description
  • This command sets or queries the window search event. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:WINdow:WHEn? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:WINdow:WHEn? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:WINdow:WHEn value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:WINdow:WHEn {ENTERSWindow|EXITSWindow|INSIDEGreater|OUTSIDEGreater}
- SEARCH:SEARCH<x>:TRIGger:A:WINdow:WHEn?
Info
  • ENTERSWindow specifies a window search when the signal enters the window.
  • EXITSWindow specifies a window search when the signal exits the window.
  • OUTSIDEGreater specifies a search when the signal leaves the window defined by the threshold levels for the time specified by Width.
  • INSIDEGreater specifies a search when the signal enters the window defined by the threshold levels for the time specified by Width.

SearchSearchItemTriggerAWindowWidth

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:WINdow:WIDth command.

Description
  • This command sets or queries the width setting for a window trigger search to determine where to place a mark. The search number is specified by x.
Usage
  • Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:WINdow:WIDth? query.
  • Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:WINdow:WIDth? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:WINdow:WIDth value command.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:WINdow:WIDth <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:WINdow:WIDth?
Info
  • <NR3> specifies the minimum width in seconds.
  • ECL specifies a preset high level of -1.3 V and TTL specifies a preset high level of +1.4V.

SearchSelected

Bases: SCPICmdWrite

The SEARCH:SELected command.

Description
  • This command sets or queries the selected search, for example SEARCH1. The search number is specified by x.
Usage
  • Using the .write(value) method will send the SEARCH:SELected value command.
SCPI Syntax
- SEARCH:SELected SEARCH1
Info
  • SEARCH1 is the specified search.