histogram ¶

The histogram commands module.

These commands are used in the following models: TekScopePC

THIS FILE IS AUTO-GENERATED, IT SHOULD NOT BE MANUALLY MODIFIED.

Please report an issue if one is found.

Commands and Queries

- HISTogram:ADDNew <QString>
- HISTogram:DELETEALL
- HISTogram:DELete <QString>
- HISTogram:HISTogram<x>:BOX <NR3>,<NR3>,<NR3>,<NR3>
- HISTogram:HISTogram<x>:BOX?
- HISTogram:HISTogram<x>:BSTate {ON|OFF}
- HISTogram:HISTogram<x>:BSTate?
- HISTogram:HISTogram<x>:DATa?
- HISTogram:HISTogram<x>:DISPlay {LINEAr|LOG}
- HISTogram:HISTogram<x>:DISPlay?
- HISTogram:HISTogram<x>:FUNCtion {HORizontal|VERTical}
- HISTogram:HISTogram<x>:FUNCtion?
- HISTogram:HISTogram<x>:MEASurement:COUNt {ON|OFF}
- HISTogram:HISTogram<x>:MEASurement:COUNt?
- HISTogram:HISTogram<x>:MEASurement:HITS {ON|OFF}
- HISTogram:HISTogram<x>:MEASurement:HITS?
- HISTogram:HISTogram<x>:MEASurement:MAX {ON|OFF}
- HISTogram:HISTogram<x>:MEASurement:MAX?
- HISTogram:HISTogram<x>:MEASurement:MEAN {ON|OFF}
- HISTogram:HISTogram<x>:MEASurement:MEAN?
- HISTogram:HISTogram<x>:MEASurement:MEDian {ON|OFF}
- HISTogram:HISTogram<x>:MEASurement:MEDian?
- HISTogram:HISTogram<x>:MEASurement:MIN {ON|OFF}
- HISTogram:HISTogram<x>:MEASurement:MIN?
- HISTogram:HISTogram<x>:MEASurement:MODE {ON|OFF}
- HISTogram:HISTogram<x>:MEASurement:MODE?
- HISTogram:HISTogram<x>:MEASurement:ONESigma {ON|OFF}
- HISTogram:HISTogram<x>:MEASurement:ONESigma?
- HISTogram:HISTogram<x>:MEASurement:PHITs {ON|OFF}
- HISTogram:HISTogram<x>:MEASurement:PHITs?
- HISTogram:HISTogram<x>:MEASurement:PK2PK {ON|OFF}
- HISTogram:HISTogram<x>:MEASurement:PK2PK?
- HISTogram:HISTogram<x>:MEASurement:RESUlts? {COUNt| HITS| MAX| MIN| PK2PK| MODE| MEAN| MEDian| PHITs| STDDev| ONESigma| TWOSigma| THRSigma},{ALLAcqs| CURRentacq| HISTory},{MAXimum| MEAN| MINimum| PK2PK| POPUlation| STDDev}
- HISTogram:HISTogram<x>:MEASurement:STDDev {ON|OFF}
- HISTogram:HISTogram<x>:MEASurement:STDDev?
- HISTogram:HISTogram<x>:MEASurement:THRSigma {ON|OFF}
- HISTogram:HISTogram<x>:MEASurement:THRSigma?
- HISTogram:HISTogram<x>:MEASurement:TWOSigma {ON|OFF}
- HISTogram:HISTogram<x>:MEASurement:TWOSigma?
- HISTogram:HISTogram<x>:SAVe <QString>
- HISTogram:HISTogram<x>:SIZe <NR3>
- HISTogram:HISTogram<x>:SIZe?
- HISTogram:HISTogram<x>:SOUrce {S<x>_CH<x>|CH<x>|MATH<x>|REF<x>}
- HISTogram:HISTogram<x>:SOUrce?
- HISTogram:HISTogram<x>:STATE {ON|OFF}
- HISTogram:HISTogram<x>:STATE?
- HISTogram:HISTogram<x>:TRANsparency <NR3>
- HISTogram:HISTogram<x>:TRANsparency?
- HISTogram:LIST?

Histogram ¶

Bases: SCPICmdRead

The HISTogram command tree.

Usage

Using the .query() method will send the HISTogram? query.
Using the .verify(value) method will send the HISTogram? query and raise an AssertionError if the returned value does not match value.

Properties

.addnew: The HISTogram:ADDNew command.
.deleteall: The HISTogram:DELETEALL command.
.delete: The HISTogram:DELete command.
.histogram: The HISTogram:HISTogram<x> command tree.
.list: The HISTogram:LIST command.

addnew `property` ¶

addnew: HistogramAddnew

Return the HISTogram:ADDNew command.

Description

This command adds the specified waveform histogram.

Usage

Using the .write(value) method will send the HISTogram:ADDNew value command.

SCPI Syntax

- HISTogram:ADDNew <QString>

Info

<QString> specifies the waveform histogram to add. The argument is of the form ‘HIST‘, where NR1 is a number value ≥ 1.

delete `property` ¶

delete: HistogramDelete

Return the HISTogram:DELete command.

Description

This command deletes the specified histogram.

Usage

Using the .write(value) method will send the HISTogram:DELete value command.

SCPI Syntax

- HISTogram:DELete <QString>

Info

<QString> specifies the waveform histogram to delete. The argument is of the form ‘HIST‘, where NR1 is a number value ≥ 1.

deleteall `property` ¶

deleteall: HistogramDeleteall

Return the HISTogram:DELETEALL command.

Description

This command deletes all the active instances of histograms defined in the scope application.

Usage

Using the .write() method will send the HISTogram:DELETEALL command.

SCPI Syntax

- HISTogram:DELETEALL

histogram `property` ¶

histogram: dict[int, HistogramHistogramItem]

Return the HISTogram:HISTogram<x> command tree.

Usage

Using the .query() method will send the HISTogram:HISTogram<x>? query.
Using the .verify(value) method will send the HISTogram:HISTogram<x>? query and raise an AssertionError if the returned value does not match value.

Info

HISTogram<x> specifies the histogram number.

Sub-properties

.box: The HISTogram:HISTogram<x>:BOX command.
.bstate: The HISTogram:HISTogram<x>:BSTate command.
.data: The HISTogram:HISTogram<x>:DATa command.
.display: The HISTogram:HISTogram<x>:DISPlay command.
.function: The HISTogram:HISTogram<x>:FUNCtion command.
.measurement: The HISTogram:HISTogram<x>:MEASurement command tree.
.save: The HISTogram:HISTogram<x>:SAVe command.
.size: The HISTogram:HISTogram<x>:SIZe command.
.source: The HISTogram:HISTogram<x>:SOUrce command.
.state: The HISTogram:HISTogram<x>:STATE command.
.transparency: The HISTogram:HISTogram<x>:TRANsparency command.

list `property` ¶

list: HistogramList

Return the HISTogram:LIST command.

Description

This query returns a comma separated list of all currently defined histograms.

Usage

Using the .query() method will send the HISTogram:LIST? query.
Using the .verify(value) method will send the HISTogram:LIST? query and raise an AssertionError if the returned value does not match value.

SCPI Syntax

- HISTogram:LIST?

HistogramAddnew ¶

Bases: SCPICmdWrite

The HISTogram:ADDNew command.

Description

This command adds the specified waveform histogram.

Usage

Using the .write(value) method will send the HISTogram:ADDNew value command.

SCPI Syntax

- HISTogram:ADDNew <QString>

Info

<QString> specifies the waveform histogram to add. The argument is of the form ‘HIST‘, where NR1 is a number value ≥ 1.

HistogramDelete ¶

Bases: SCPICmdWrite

The HISTogram:DELete command.

Description

This command deletes the specified histogram.

Usage

Using the .write(value) method will send the HISTogram:DELete value command.

SCPI Syntax

- HISTogram:DELete <QString>

Info

<QString> specifies the waveform histogram to delete. The argument is of the form ‘HIST‘, where NR1 is a number value ≥ 1.

HistogramDeleteall ¶

Bases: SCPICmdWriteNoArguments

The HISTogram:DELETEALL command.

Description

This command deletes all the active instances of histograms defined in the scope application.

Usage

Using the .write() method will send the HISTogram:DELETEALL command.

SCPI Syntax

- HISTogram:DELETEALL

HistogramHistogramItem ¶

Bases: ValidatedDynamicNumberCmd, SCPICmdRead

The HISTogram:HISTogram<x> command tree.

Usage

Using the .query() method will send the HISTogram:HISTogram<x>? query.
Using the .verify(value) method will send the HISTogram:HISTogram<x>? query and raise an AssertionError if the returned value does not match value.

Info

HISTogram<x> specifies the histogram number.

Properties

.box: The HISTogram:HISTogram<x>:BOX command.
.bstate: The HISTogram:HISTogram<x>:BSTate command.
.data: The HISTogram:HISTogram<x>:DATa command.
.display: The HISTogram:HISTogram<x>:DISPlay command.
.function: The HISTogram:HISTogram<x>:FUNCtion command.
.measurement: The HISTogram:HISTogram<x>:MEASurement command tree.
.save: The HISTogram:HISTogram<x>:SAVe command.
.size: The HISTogram:HISTogram<x>:SIZe command.
.source: The HISTogram:HISTogram<x>:SOUrce command.
.state: The HISTogram:HISTogram<x>:STATE command.
.transparency: The HISTogram:HISTogram<x>:TRANsparency command.

box `property` ¶

box: HistogramHistogramItemBox

Return the HISTogram:HISTogram<x>:BOX command.

Description

This command sets or queries the top, left, bottom and right positions of the histogram box in source waveform coordinates. The argument is of the form ,,,.

Usage

Using the .query() method will send the HISTogram:HISTogram<x>:BOX? query.
Using the .verify(value) method will send the HISTogram:HISTogram<x>:BOX? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the HISTogram:HISTogram<x>:BOX value command.

SCPI Syntax

- HISTogram:HISTogram<x>:BOX <NR3>,<NR3>,<NR3>,<NR3>
- HISTogram:HISTogram<x>:BOX?

Info

HISTogram<x> specifies the histogram number.
<NR3> specifies four position values, separated by commas. The values are the top, left, bottom, and right coordinates in that order.

bstate `property` ¶

bstate: HistogramHistogramItemBstate

Return the HISTogram:HISTogram<x>:BSTate command.

Description

This command sets or queries whether the histogram badge is displayed.

Usage

Using the .query() method will send the HISTogram:HISTogram<x>:BSTate? query.
Using the .verify(value) method will send the HISTogram:HISTogram<x>:BSTate? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the HISTogram:HISTogram<x>:BSTate value command.

SCPI Syntax

- HISTogram:HISTogram<x>:BSTate {ON|OFF}
- HISTogram:HISTogram<x>:BSTate?

Info

HISTogram<x> specifies the histogram number.
ON enables the histogram badge display.
OFF disables the histogram badge display.

data `property` ¶

data: HistogramHistogramItemData

Return the HISTogram:HISTogram<x>:DATa command.

Description

This query only command returns a comma separated list of numbers representing the histogram bin data.

Usage

Using the .query() method will send the HISTogram:HISTogram<x>:DATa? query.
Using the .verify(value) method will send the HISTogram:HISTogram<x>:DATa? query and raise an AssertionError if the returned value does not match value.

SCPI Syntax

- HISTogram:HISTogram<x>:DATa?

display `property` ¶

display: HistogramHistogramItemDisplay

Return the HISTogram:HISTogram<x>:DISPlay command.

Description

This command sets or queries the histogram scaling display setting.

Usage

Using the .query() method will send the HISTogram:HISTogram<x>:DISPlay? query.
Using the .verify(value) method will send the HISTogram:HISTogram<x>:DISPlay? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the HISTogram:HISTogram<x>:DISPlay value command.

SCPI Syntax

- HISTogram:HISTogram<x>:DISPlay {LINEAr|LOG}
- HISTogram:HISTogram<x>:DISPlay?

Info

HISTogram<x> specifies the histogram number.
LINEAr sets the histogram scaling to linear mode.
LOG sets the histogram scaling to logarithmic mode.

function `property` ¶

function: HistogramHistogramItemFunction

Return the HISTogram:HISTogram<x>:FUNCtion command.

Description

This command sets or queries the histogram mode.

Usage

Using the .query() method will send the HISTogram:HISTogram<x>:FUNCtion? query.
Using the .verify(value) method will send the HISTogram:HISTogram<x>:FUNCtion? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the HISTogram:HISTogram<x>:FUNCtion value command.

SCPI Syntax

- HISTogram:HISTogram<x>:FUNCtion {HORizontal|VERTical}
- HISTogram:HISTogram<x>:FUNCtion?

Info

HISTogram<x> specifies the histogram number.
HORizontal sets the histogram mode to horizontal.
VERTical sets the histogram mode to vertical.

measurement `property` ¶

measurement: HistogramHistogramItemMeasurement

Return the HISTogram:HISTogram<x>:MEASurement command tree.

Usage

Using the .query() method will send the HISTogram:HISTogram<x>:MEASurement? query.
Using the .verify(value) method will send the HISTogram:HISTogram<x>:MEASurement? query and raise an AssertionError if the returned value does not match value.

Info

HISTogram<x> specifies the histogram number.

Sub-properties

.count: The HISTogram:HISTogram<x>:MEASurement:COUNt command.
.hits: The HISTogram:HISTogram<x>:MEASurement:HITS command.
.max: The HISTogram:HISTogram<x>:MEASurement:MAX command.
.mean: The HISTogram:HISTogram<x>:MEASurement:MEAN command.
.median: The HISTogram:HISTogram<x>:MEASurement:MEDian command.
.min: The HISTogram:HISTogram<x>:MEASurement:MIN command.
.mode: The HISTogram:HISTogram<x>:MEASurement:MODE command.
.onesigma: The HISTogram:HISTogram<x>:MEASurement:ONESigma command.
.phits: The HISTogram:HISTogram<x>:MEASurement:PHITs command.
.pk2pk: The HISTogram:HISTogram<x>:MEASurement:PK2PK command.
.results: The HISTogram:HISTogram<x>:MEASurement:RESUlts command.
.stddev: The HISTogram:HISTogram<x>:MEASurement:STDDev command.
.thrsigma: The HISTogram:HISTogram<x>:MEASurement:THRSigma command.
.twosigma: The HISTogram:HISTogram<x>:MEASurement:TWOSigma command.

save `property` ¶

save: HistogramHistogramItemSave

Return the HISTogram:HISTogram<x>:SAVe command.

Description

This command saves the specified histograms data as a comma separated list of values.

Usage

Using the .write(value) method will send the HISTogram:HISTogram<x>:SAVe value command.

SCPI Syntax

- HISTogram:HISTogram<x>:SAVe <QString>

Info

HISTogram<x> specifies the histogram number.
<QString> is the file path to save the .csv file to.

size `property` ¶

size: HistogramHistogramItemSize

Return the HISTogram:HISTogram<x>:SIZe command.

Description

This command sets or queries the height or width of the specified histogram bins in divisions. This size can be larger than the box, which allows you to view the histogram bins easily.

Usage

Using the .query() method will send the HISTogram:HISTogram<x>:SIZe? query.
Using the .verify(value) method will send the HISTogram:HISTogram<x>:SIZe? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the HISTogram:HISTogram<x>:SIZe value command.

SCPI Syntax

- HISTogram:HISTogram<x>:SIZe <NR3>
- HISTogram:HISTogram<x>:SIZe?

Info

HISTogram<x> specifies the histogram number.
<NR3> specifies the number of divisions to set the height or width of the histogram bins to.

source `property` ¶

source: HistogramHistogramItemSource

Return the HISTogram:HISTogram<x>:SOUrce command.

Description

This command sets or queries which source waveform will be compared against the histogram box when the histogram testing is enabled.

Usage

Using the .query() method will send the HISTogram:HISTogram<x>:SOUrce? query.
Using the .verify(value) method will send the HISTogram:HISTogram<x>:SOUrce? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the HISTogram:HISTogram<x>:SOUrce value command.

SCPI Syntax

- HISTogram:HISTogram<x>:SOUrce {S<x>_CH<x>|CH<x>|MATH<x>|REF<x>}
- HISTogram:HISTogram<x>:SOUrce?

Info

HISTogram<x> specifies the histogram number.
S<x>_CH<x> specifies is the remote scope number and the analog channel as source.
CH<x> specifies an analog channel as source.
MATH<x> specifies a math channel as source.
REF<x> specifies a reference waveform as the source.

state `property` ¶

state: HistogramHistogramItemState

Return the HISTogram:HISTogram<x>:STATE command.

Description

This command sets or queries whether histogram calculations are enabled for the specified histogram.

Usage

Using the .query() method will send the HISTogram:HISTogram<x>:STATE? query.
Using the .verify(value) method will send the HISTogram:HISTogram<x>:STATE? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the HISTogram:HISTogram<x>:STATE value command.

SCPI Syntax

- HISTogram:HISTogram<x>:STATE {ON|OFF}
- HISTogram:HISTogram<x>:STATE?

Info

HISTogram<x> specifies the histogram number.
ON enables the histogram calculations.
OFF disables the histogram calculations.

transparency `property` ¶

transparency: HistogramHistogramItemTransparency

Return the HISTogram:HISTogram<x>:TRANsparency command.

Description

This command sets or queries the transparency of the histogram bins.

Usage

Using the .query() method will send the HISTogram:HISTogram<x>:TRANsparency? query.
Using the .verify(value) method will send the HISTogram:HISTogram<x>:TRANsparency? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the HISTogram:HISTogram<x>:TRANsparency value command.

SCPI Syntax

- HISTogram:HISTogram<x>:TRANsparency <NR3>
- HISTogram:HISTogram<x>:TRANsparency?

Info

HISTogram<x> specifies the histogram number.
<NR3> specifies the transparency as a percentage, with a minimum of 0 and a maximum of 100.

HistogramHistogramItemBox ¶

Bases: SCPICmdWrite, SCPICmdRead

The HISTogram:HISTogram<x>:BOX command.

Description

This command sets or queries the top, left, bottom and right positions of the histogram box in source waveform coordinates. The argument is of the form ,,,.

Usage

Using the .query() method will send the HISTogram:HISTogram<x>:BOX? query.
Using the .verify(value) method will send the HISTogram:HISTogram<x>:BOX? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the HISTogram:HISTogram<x>:BOX value command.

SCPI Syntax

- HISTogram:HISTogram<x>:BOX <NR3>,<NR3>,<NR3>,<NR3>
- HISTogram:HISTogram<x>:BOX?

Info

HISTogram<x> specifies the histogram number.
<NR3> specifies four position values, separated by commas. The values are the top, left, bottom, and right coordinates in that order.

HistogramHistogramItemBstate ¶

Bases: SCPICmdWrite, SCPICmdRead

The HISTogram:HISTogram<x>:BSTate command.

Description

This command sets or queries whether the histogram badge is displayed.

Usage

Using the .query() method will send the HISTogram:HISTogram<x>:BSTate? query.
Using the .verify(value) method will send the HISTogram:HISTogram<x>:BSTate? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the HISTogram:HISTogram<x>:BSTate value command.

SCPI Syntax

- HISTogram:HISTogram<x>:BSTate {ON|OFF}
- HISTogram:HISTogram<x>:BSTate?

Info

HISTogram<x> specifies the histogram number.
ON enables the histogram badge display.
OFF disables the histogram badge display.

HistogramHistogramItemData ¶

Bases: SCPICmdRead

The HISTogram:HISTogram<x>:DATa command.

Description

This query only command returns a comma separated list of numbers representing the histogram bin data.

Usage

Using the .query() method will send the HISTogram:HISTogram<x>:DATa? query.
Using the .verify(value) method will send the HISTogram:HISTogram<x>:DATa? query and raise an AssertionError if the returned value does not match value.

SCPI Syntax

- HISTogram:HISTogram<x>:DATa?

HistogramHistogramItemDisplay ¶

Bases: SCPICmdWrite, SCPICmdRead

The HISTogram:HISTogram<x>:DISPlay command.

Description

This command sets or queries the histogram scaling display setting.

Usage

Using the .query() method will send the HISTogram:HISTogram<x>:DISPlay? query.
Using the .verify(value) method will send the HISTogram:HISTogram<x>:DISPlay? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the HISTogram:HISTogram<x>:DISPlay value command.

SCPI Syntax

- HISTogram:HISTogram<x>:DISPlay {LINEAr|LOG}
- HISTogram:HISTogram<x>:DISPlay?

Info

HISTogram<x> specifies the histogram number.
LINEAr sets the histogram scaling to linear mode.
LOG sets the histogram scaling to logarithmic mode.

HistogramHistogramItemFunction ¶

Bases: SCPICmdWrite, SCPICmdRead

The HISTogram:HISTogram<x>:FUNCtion command.

Description

This command sets or queries the histogram mode.

Usage

Using the .query() method will send the HISTogram:HISTogram<x>:FUNCtion? query.
Using the .verify(value) method will send the HISTogram:HISTogram<x>:FUNCtion? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the HISTogram:HISTogram<x>:FUNCtion value command.

SCPI Syntax

- HISTogram:HISTogram<x>:FUNCtion {HORizontal|VERTical}
- HISTogram:HISTogram<x>:FUNCtion?

Info

HISTogram<x> specifies the histogram number.
HORizontal sets the histogram mode to horizontal.
VERTical sets the histogram mode to vertical.

HistogramHistogramItemMeasurement ¶

Bases: SCPICmdRead

The HISTogram:HISTogram<x>:MEASurement command tree.

Usage

Using the .query() method will send the HISTogram:HISTogram<x>:MEASurement? query.
Using the .verify(value) method will send the HISTogram:HISTogram<x>:MEASurement? query and raise an AssertionError if the returned value does not match value.

Info

HISTogram<x> specifies the histogram number.

Properties

.count: The HISTogram:HISTogram<x>:MEASurement:COUNt command.
.hits: The HISTogram:HISTogram<x>:MEASurement:HITS command.
.max: The HISTogram:HISTogram<x>:MEASurement:MAX command.
.mean: The HISTogram:HISTogram<x>:MEASurement:MEAN command.
.median: The HISTogram:HISTogram<x>:MEASurement:MEDian command.
.min: The HISTogram:HISTogram<x>:MEASurement:MIN command.
.mode: The HISTogram:HISTogram<x>:MEASurement:MODE command.
.onesigma: The HISTogram:HISTogram<x>:MEASurement:ONESigma command.
.phits: The HISTogram:HISTogram<x>:MEASurement:PHITs command.
.pk2pk: The HISTogram:HISTogram<x>:MEASurement:PK2PK command.
.results: The HISTogram:HISTogram<x>:MEASurement:RESUlts command.
.stddev: The HISTogram:HISTogram<x>:MEASurement:STDDev command.
.thrsigma: The HISTogram:HISTogram<x>:MEASurement:THRSigma command.
.twosigma: The HISTogram:HISTogram<x>:MEASurement:TWOSigma command.

count `property` ¶

count: HistogramHistogramItemMeasurementCount

Return the HISTogram:HISTogram<x>:MEASurement:COUNt command.

Description

This command sets or queries whether the waveform count measurement is enabled on the histogram.

Usage

Using the .query() method will send the HISTogram:HISTogram<x>:MEASurement:COUNt? query.
Using the .verify(value) method will send the HISTogram:HISTogram<x>:MEASurement:COUNt? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the HISTogram:HISTogram<x>:MEASurement:COUNt value command.

SCPI Syntax

- HISTogram:HISTogram<x>:MEASurement:COUNt {ON|OFF}
- HISTogram:HISTogram<x>:MEASurement:COUNt?

Info

HISTogram<x> specifies the histogram number.
ON enables the waveform count measurement.
OFF disables the waveform count measurement.

hits `property` ¶

hits: HistogramHistogramItemMeasurementHits

Return the HISTogram:HISTogram<x>:MEASurement:HITS command.

Description

This command sets or queries whether the Hits in Box measurement is enabled on the histogram.

Usage

Using the .query() method will send the HISTogram:HISTogram<x>:MEASurement:HITS? query.
Using the .verify(value) method will send the HISTogram:HISTogram<x>:MEASurement:HITS? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the HISTogram:HISTogram<x>:MEASurement:HITS value command.

SCPI Syntax

- HISTogram:HISTogram<x>:MEASurement:HITS {ON|OFF}
- HISTogram:HISTogram<x>:MEASurement:HITS?

Info

HISTogram<x> specifies the histogram number.
ON enables the Hits in Box measurement.
OFF disables the Hits in Box measurement.

max `property` ¶

max: HistogramHistogramItemMeasurementMax

Return the HISTogram:HISTogram<x>:MEASurement:MAX command.

Description

This command sets or queries whether the Max measurement is enabled on the histogram.

Usage

Using the .query() method will send the HISTogram:HISTogram<x>:MEASurement:MAX? query.
Using the .verify(value) method will send the HISTogram:HISTogram<x>:MEASurement:MAX? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the HISTogram:HISTogram<x>:MEASurement:MAX value command.

SCPI Syntax

- HISTogram:HISTogram<x>:MEASurement:MAX {ON|OFF}
- HISTogram:HISTogram<x>:MEASurement:MAX?

Info

HISTogram<x> specifies the histogram number.
ON enables the Max measurement.
OFF disables the Max measurement.

mean `property` ¶

mean: HistogramHistogramItemMeasurementMean

Return the HISTogram:HISTogram<x>:MEASurement:MEAN command.

Description

This command sets or queries whether the Mean measurement is enabled on the histogram.

Usage

Using the .query() method will send the HISTogram:HISTogram<x>:MEASurement:MEAN? query.
Using the .verify(value) method will send the HISTogram:HISTogram<x>:MEASurement:MEAN? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the HISTogram:HISTogram<x>:MEASurement:MEAN value command.

SCPI Syntax

- HISTogram:HISTogram<x>:MEASurement:MEAN {ON|OFF}
- HISTogram:HISTogram<x>:MEASurement:MEAN?

Info

HISTogram<x> specifies the histogram number.
ON enables the Mean measurement.
OFF disables the Mean measurement.

median `property` ¶

median: HistogramHistogramItemMeasurementMedian

Return the HISTogram:HISTogram<x>:MEASurement:MEDian command.

Description

This command sets or queries whether the Median measurement is enabled on the histogram.

Usage

Using the .query() method will send the HISTogram:HISTogram<x>:MEASurement:MEDian? query.
Using the .verify(value) method will send the HISTogram:HISTogram<x>:MEASurement:MEDian? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the HISTogram:HISTogram<x>:MEASurement:MEDian value command.

SCPI Syntax

- HISTogram:HISTogram<x>:MEASurement:MEDian {ON|OFF}
- HISTogram:HISTogram<x>:MEASurement:MEDian?

Info

HISTogram<x> specifies the histogram number.
ON enables the Median measurement.
OFF disables the Median measurement.

min `property` ¶

min: HistogramHistogramItemMeasurementMin

Return the HISTogram:HISTogram<x>:MEASurement:MIN command.

Description

This command sets or queries whether the Min measurement is enabled on the histogram.

Usage

Using the .query() method will send the HISTogram:HISTogram<x>:MEASurement:MIN? query.
Using the .verify(value) method will send the HISTogram:HISTogram<x>:MEASurement:MIN? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the HISTogram:HISTogram<x>:MEASurement:MIN value command.

SCPI Syntax

- HISTogram:HISTogram<x>:MEASurement:MIN {ON|OFF}
- HISTogram:HISTogram<x>:MEASurement:MIN?

Info

HISTogram<x> specifies the histogram number.
ON enables the Min measurement.
OFF disables the Min measurement.

mode `property` ¶

mode: HistogramHistogramItemMeasurementMode

Return the HISTogram:HISTogram<x>:MEASurement:MODE command.

Description

This command sets or queries whether the Mode measurement is enabled on the histogram.

Usage

Using the .query() method will send the HISTogram:HISTogram<x>:MEASurement:MODE? query.
Using the .verify(value) method will send the HISTogram:HISTogram<x>:MEASurement:MODE? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the HISTogram:HISTogram<x>:MEASurement:MODE value command.

SCPI Syntax

- HISTogram:HISTogram<x>:MEASurement:MODE {ON|OFF}
- HISTogram:HISTogram<x>:MEASurement:MODE?

Info

HISTogram<x> specifies the histogram number.
ON enables the Mode measurement.
OFF disables the Mode measurement.

onesigma `property` ¶

onesigma: HistogramHistogramItemMeasurementOnesigma

Return the HISTogram:HISTogram<x>:MEASurement:ONESigma command.

Description

This command sets or queries whether the µ±1(sigma) measurement is enabled on the histogram.

Usage

Using the .query() method will send the HISTogram:HISTogram<x>:MEASurement:ONESigma? query.
Using the .verify(value) method will send the HISTogram:HISTogram<x>:MEASurement:ONESigma? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the HISTogram:HISTogram<x>:MEASurement:ONESigma value command.

SCPI Syntax

- HISTogram:HISTogram<x>:MEASurement:ONESigma {ON|OFF}
- HISTogram:HISTogram<x>:MEASurement:ONESigma?

Info

HISTogram<x> specifies the histogram number.
ON enables the µ±1(sigma) measurement.
OFF disables the µ±1(sigma) measurement.

phits `property` ¶

phits: HistogramHistogramItemMeasurementPhits

Return the HISTogram:HISTogram<x>:MEASurement:PHITs command.

Description

This command sets or queries whether the Peak Hits measurement is enabled on the histogram.

Usage

Using the .query() method will send the HISTogram:HISTogram<x>:MEASurement:PHITs? query.
Using the .verify(value) method will send the HISTogram:HISTogram<x>:MEASurement:PHITs? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the HISTogram:HISTogram<x>:MEASurement:PHITs value command.

SCPI Syntax

- HISTogram:HISTogram<x>:MEASurement:PHITs {ON|OFF}
- HISTogram:HISTogram<x>:MEASurement:PHITs?

Info

HISTogram<x> specifies the histogram number.
ON enables the Peak Hits measurement.
OFF disables the Peak Hits measurement.

pk2pk `property` ¶

pk2pk: HistogramHistogramItemMeasurementPk2pk

Return the HISTogram:HISTogram<x>:MEASurement:PK2PK command.

Description

This command sets or queries whether the Peak-to-peak measurement is enabled on the histogram.

Usage

Using the .query() method will send the HISTogram:HISTogram<x>:MEASurement:PK2PK? query.
Using the .verify(value) method will send the HISTogram:HISTogram<x>:MEASurement:PK2PK? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the HISTogram:HISTogram<x>:MEASurement:PK2PK value command.

SCPI Syntax

- HISTogram:HISTogram<x>:MEASurement:PK2PK {ON|OFF}
- HISTogram:HISTogram<x>:MEASurement:PK2PK?

Info

HISTogram<x> specifies the histogram number.
ON enables the Peak-to-peak measurement.
OFF disables the Peak-to-peak measurement.

results `property` ¶

results: HistogramHistogramItemMeasurementResults

Return the HISTogram:HISTogram<x>:MEASurement:RESUlts command.

Description

This query only command returns the measurement results from the specified histogram. The argument must be in the form of {argument 1},{argument 2},{argument 3}. Argument 1 specifies which histogram measurement to return results for. Argument 2 specifies which acquisitions to return measurement results for. Argument 3 specifies which statistic to return measurement results for.

Usage

Using the .query(argument) method will send the HISTogram:HISTogram<x>:MEASurement:RESUlts? argument query.
Using the .verify(argument, value) method will send the HISTogram:HISTogram<x>:MEASurement:RESUlts? argument query and raise an AssertionError if the returned value does not match value.

SCPI Syntax

- HISTogram:HISTogram<x>:MEASurement:RESUlts? {COUNt| HITS| MAX| MIN| PK2PK| MODE| MEAN| MEDian| PHITs| STDDev| ONESigma| TWOSigma| THRSigma},{ALLAcqs| CURRentacq| HISTory},{MAXimum| MEAN| MINimum| PK2PK| POPUlation| STDDev}

Info

HISTogram<x> specifies the histogram number.
COUNt specifies the Count as the histogram measurement to return results for.
HITS specifies the Hits as the histogram measurement to return results for.
MAX specifies the Max as the histogram measurement to return results for.
MIN specifies the Min as the histogram measurement to return results for.
PK2PK specifies the Peak-to-peak as the histogram measurement or statistic to return results for.
MODE specifies the Mode as the histogram measurement to return results for.
MEAN specifies the Mean as the histogram measurement or statistic to return results for.
MEDian specifies the Median as the histogram measurement to return results for.
PHITs specifies the Peak Hits as the histogram measurement to return results for.
STDDev specifies the Standard Deviation as the histogram measurement or statistic to return results for.
ONESigma specifies the µ±1(sigma) as the histogram measurement to return results for.
TWOSigma specifies the µ±2(sigma) as the histogram measurement to return results for.
THRSigma specifies the µ±3(sigma) as the histogram measurement to return results for.
ALLAcqs specifies the All Acquisitions as the acquisitions to return results for.
CURRentacq specifies the Current Acquisitions as the acquisitions to return results for.
HISTory specifies the History as the acquisitions to return results for.
MAXimum specifies the Maximum as the statistic to return results for.
MINimum specifies the Minimum as the statistic to return results for.
POPUlation specifies the Population as the statistic to return results for.

stddev `property` ¶

stddev: HistogramHistogramItemMeasurementStddev

Return the HISTogram:HISTogram<x>:MEASurement:STDDev command.

Description

This command sets or queries whether the Standard Deviation measurement is enabled on the histogram.

Usage

Using the .query() method will send the HISTogram:HISTogram<x>:MEASurement:STDDev? query.
Using the .verify(value) method will send the HISTogram:HISTogram<x>:MEASurement:STDDev? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the HISTogram:HISTogram<x>:MEASurement:STDDev value command.

SCPI Syntax

- HISTogram:HISTogram<x>:MEASurement:STDDev {ON|OFF}
- HISTogram:HISTogram<x>:MEASurement:STDDev?

Info

HISTogram<x> specifies the histogram number.
ON enables the Standard Deviation measurement.
OFF disables the Standard Deviation measurement.

thrsigma `property` ¶

thrsigma: HistogramHistogramItemMeasurementThrsigma

Return the HISTogram:HISTogram<x>:MEASurement:THRSigma command.

Description

This command sets or queries whether the µ±3(sigma) measurement is enabled on the histogram.

Usage

Using the .query() method will send the HISTogram:HISTogram<x>:MEASurement:THRSigma? query.
Using the .verify(value) method will send the HISTogram:HISTogram<x>:MEASurement:THRSigma? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the HISTogram:HISTogram<x>:MEASurement:THRSigma value command.

SCPI Syntax

- HISTogram:HISTogram<x>:MEASurement:THRSigma {ON|OFF}
- HISTogram:HISTogram<x>:MEASurement:THRSigma?

Info

HISTogram<x> specifies the histogram number.
ON enables the µ±3(sigma) measurement.
OFF disables the µ±3(sigma) measurement.

twosigma `property` ¶

twosigma: HistogramHistogramItemMeasurementTwosigma

Return the HISTogram:HISTogram<x>:MEASurement:TWOSigma command.

Description

This command sets or queries whether the µ±2(sigma) measurement is enabled on the histogram.

Usage

Using the .query() method will send the HISTogram:HISTogram<x>:MEASurement:TWOSigma? query.
Using the .verify(value) method will send the HISTogram:HISTogram<x>:MEASurement:TWOSigma? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the HISTogram:HISTogram<x>:MEASurement:TWOSigma value command.

SCPI Syntax

- HISTogram:HISTogram<x>:MEASurement:TWOSigma {ON|OFF}
- HISTogram:HISTogram<x>:MEASurement:TWOSigma?

Info

HISTogram<x> specifies the histogram number.
ON enables the µ±2(sigma) measurement.
OFF disables the µ±2(sigma) measurement.

HistogramHistogramItemMeasurementCount ¶

Bases: SCPICmdWrite, SCPICmdRead

The HISTogram:HISTogram<x>:MEASurement:COUNt command.

Description

This command sets or queries whether the waveform count measurement is enabled on the histogram.

Usage

Using the .query() method will send the HISTogram:HISTogram<x>:MEASurement:COUNt? query.
Using the .verify(value) method will send the HISTogram:HISTogram<x>:MEASurement:COUNt? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the HISTogram:HISTogram<x>:MEASurement:COUNt value command.

SCPI Syntax

- HISTogram:HISTogram<x>:MEASurement:COUNt {ON|OFF}
- HISTogram:HISTogram<x>:MEASurement:COUNt?

Info

HISTogram<x> specifies the histogram number.
ON enables the waveform count measurement.
OFF disables the waveform count measurement.

HistogramHistogramItemMeasurementHits ¶

Bases: SCPICmdWrite, SCPICmdRead

The HISTogram:HISTogram<x>:MEASurement:HITS command.

Description

This command sets or queries whether the Hits in Box measurement is enabled on the histogram.

Usage

Using the .query() method will send the HISTogram:HISTogram<x>:MEASurement:HITS? query.
Using the .verify(value) method will send the HISTogram:HISTogram<x>:MEASurement:HITS? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the HISTogram:HISTogram<x>:MEASurement:HITS value command.

SCPI Syntax

- HISTogram:HISTogram<x>:MEASurement:HITS {ON|OFF}
- HISTogram:HISTogram<x>:MEASurement:HITS?

Info

HISTogram<x> specifies the histogram number.
ON enables the Hits in Box measurement.
OFF disables the Hits in Box measurement.

HistogramHistogramItemMeasurementMax ¶

Bases: SCPICmdWrite, SCPICmdRead

The HISTogram:HISTogram<x>:MEASurement:MAX command.

Description

This command sets or queries whether the Max measurement is enabled on the histogram.

Usage

Using the .query() method will send the HISTogram:HISTogram<x>:MEASurement:MAX? query.
Using the .verify(value) method will send the HISTogram:HISTogram<x>:MEASurement:MAX? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the HISTogram:HISTogram<x>:MEASurement:MAX value command.

SCPI Syntax

- HISTogram:HISTogram<x>:MEASurement:MAX {ON|OFF}
- HISTogram:HISTogram<x>:MEASurement:MAX?

Info

HISTogram<x> specifies the histogram number.
ON enables the Max measurement.
OFF disables the Max measurement.

HistogramHistogramItemMeasurementMean ¶

Bases: SCPICmdWrite, SCPICmdRead

The HISTogram:HISTogram<x>:MEASurement:MEAN command.

Description

This command sets or queries whether the Mean measurement is enabled on the histogram.

Usage

Using the .query() method will send the HISTogram:HISTogram<x>:MEASurement:MEAN? query.
Using the .verify(value) method will send the HISTogram:HISTogram<x>:MEASurement:MEAN? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the HISTogram:HISTogram<x>:MEASurement:MEAN value command.

SCPI Syntax

- HISTogram:HISTogram<x>:MEASurement:MEAN {ON|OFF}
- HISTogram:HISTogram<x>:MEASurement:MEAN?

Info

HISTogram<x> specifies the histogram number.
ON enables the Mean measurement.
OFF disables the Mean measurement.

HistogramHistogramItemMeasurementMedian ¶

Bases: SCPICmdWrite, SCPICmdRead

The HISTogram:HISTogram<x>:MEASurement:MEDian command.

Description

This command sets or queries whether the Median measurement is enabled on the histogram.

Usage

Using the .query() method will send the HISTogram:HISTogram<x>:MEASurement:MEDian? query.
Using the .verify(value) method will send the HISTogram:HISTogram<x>:MEASurement:MEDian? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the HISTogram:HISTogram<x>:MEASurement:MEDian value command.

SCPI Syntax

- HISTogram:HISTogram<x>:MEASurement:MEDian {ON|OFF}
- HISTogram:HISTogram<x>:MEASurement:MEDian?

Info

HISTogram<x> specifies the histogram number.
ON enables the Median measurement.
OFF disables the Median measurement.

HistogramHistogramItemMeasurementMin ¶

Bases: SCPICmdWrite, SCPICmdRead

The HISTogram:HISTogram<x>:MEASurement:MIN command.

Description

This command sets or queries whether the Min measurement is enabled on the histogram.

Usage

Using the .query() method will send the HISTogram:HISTogram<x>:MEASurement:MIN? query.
Using the .verify(value) method will send the HISTogram:HISTogram<x>:MEASurement:MIN? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the HISTogram:HISTogram<x>:MEASurement:MIN value command.

SCPI Syntax

- HISTogram:HISTogram<x>:MEASurement:MIN {ON|OFF}
- HISTogram:HISTogram<x>:MEASurement:MIN?

Info

HISTogram<x> specifies the histogram number.
ON enables the Min measurement.
OFF disables the Min measurement.

HistogramHistogramItemMeasurementMode ¶

Bases: SCPICmdWrite, SCPICmdRead

The HISTogram:HISTogram<x>:MEASurement:MODE command.

Description

This command sets or queries whether the Mode measurement is enabled on the histogram.

Usage

Using the .query() method will send the HISTogram:HISTogram<x>:MEASurement:MODE? query.
Using the .verify(value) method will send the HISTogram:HISTogram<x>:MEASurement:MODE? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the HISTogram:HISTogram<x>:MEASurement:MODE value command.

SCPI Syntax

- HISTogram:HISTogram<x>:MEASurement:MODE {ON|OFF}
- HISTogram:HISTogram<x>:MEASurement:MODE?

Info

HISTogram<x> specifies the histogram number.
ON enables the Mode measurement.
OFF disables the Mode measurement.

HistogramHistogramItemMeasurementOnesigma ¶

Bases: SCPICmdWrite, SCPICmdRead

The HISTogram:HISTogram<x>:MEASurement:ONESigma command.

Description

This command sets or queries whether the µ±1(sigma) measurement is enabled on the histogram.

Usage

Using the .query() method will send the HISTogram:HISTogram<x>:MEASurement:ONESigma? query.
Using the .verify(value) method will send the HISTogram:HISTogram<x>:MEASurement:ONESigma? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the HISTogram:HISTogram<x>:MEASurement:ONESigma value command.

SCPI Syntax

- HISTogram:HISTogram<x>:MEASurement:ONESigma {ON|OFF}
- HISTogram:HISTogram<x>:MEASurement:ONESigma?

Info

HISTogram<x> specifies the histogram number.
ON enables the µ±1(sigma) measurement.
OFF disables the µ±1(sigma) measurement.

HistogramHistogramItemMeasurementPhits ¶

Bases: SCPICmdWrite, SCPICmdRead

The HISTogram:HISTogram<x>:MEASurement:PHITs command.

Description

This command sets or queries whether the Peak Hits measurement is enabled on the histogram.

Usage

Using the .query() method will send the HISTogram:HISTogram<x>:MEASurement:PHITs? query.
Using the .verify(value) method will send the HISTogram:HISTogram<x>:MEASurement:PHITs? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the HISTogram:HISTogram<x>:MEASurement:PHITs value command.

SCPI Syntax

- HISTogram:HISTogram<x>:MEASurement:PHITs {ON|OFF}
- HISTogram:HISTogram<x>:MEASurement:PHITs?

Info

HISTogram<x> specifies the histogram number.
ON enables the Peak Hits measurement.
OFF disables the Peak Hits measurement.

HistogramHistogramItemMeasurementPk2pk ¶

Bases: SCPICmdWrite, SCPICmdRead

The HISTogram:HISTogram<x>:MEASurement:PK2PK command.

Description

This command sets or queries whether the Peak-to-peak measurement is enabled on the histogram.

Usage

Using the .query() method will send the HISTogram:HISTogram<x>:MEASurement:PK2PK? query.
Using the .verify(value) method will send the HISTogram:HISTogram<x>:MEASurement:PK2PK? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the HISTogram:HISTogram<x>:MEASurement:PK2PK value command.

SCPI Syntax

- HISTogram:HISTogram<x>:MEASurement:PK2PK {ON|OFF}
- HISTogram:HISTogram<x>:MEASurement:PK2PK?

Info

HISTogram<x> specifies the histogram number.
ON enables the Peak-to-peak measurement.
OFF disables the Peak-to-peak measurement.

HistogramHistogramItemMeasurementResults ¶

Bases: SCPICmdReadWithArguments

The HISTogram:HISTogram<x>:MEASurement:RESUlts command.

Description

This query only command returns the measurement results from the specified histogram. The argument must be in the form of {argument 1},{argument 2},{argument 3}. Argument 1 specifies which histogram measurement to return results for. Argument 2 specifies which acquisitions to return measurement results for. Argument 3 specifies which statistic to return measurement results for.

Usage

Using the .query(argument) method will send the HISTogram:HISTogram<x>:MEASurement:RESUlts? argument query.
Using the .verify(argument, value) method will send the HISTogram:HISTogram<x>:MEASurement:RESUlts? argument query and raise an AssertionError if the returned value does not match value.

SCPI Syntax

- HISTogram:HISTogram<x>:MEASurement:RESUlts? {COUNt| HITS| MAX| MIN| PK2PK| MODE| MEAN| MEDian| PHITs| STDDev| ONESigma| TWOSigma| THRSigma},{ALLAcqs| CURRentacq| HISTory},{MAXimum| MEAN| MINimum| PK2PK| POPUlation| STDDev}

Info

HISTogram<x> specifies the histogram number.
COUNt specifies the Count as the histogram measurement to return results for.
HITS specifies the Hits as the histogram measurement to return results for.
MAX specifies the Max as the histogram measurement to return results for.
MIN specifies the Min as the histogram measurement to return results for.
PK2PK specifies the Peak-to-peak as the histogram measurement or statistic to return results for.
MODE specifies the Mode as the histogram measurement to return results for.
MEAN specifies the Mean as the histogram measurement or statistic to return results for.
MEDian specifies the Median as the histogram measurement to return results for.
PHITs specifies the Peak Hits as the histogram measurement to return results for.
STDDev specifies the Standard Deviation as the histogram measurement or statistic to return results for.
ONESigma specifies the µ±1(sigma) as the histogram measurement to return results for.
TWOSigma specifies the µ±2(sigma) as the histogram measurement to return results for.
THRSigma specifies the µ±3(sigma) as the histogram measurement to return results for.
ALLAcqs specifies the All Acquisitions as the acquisitions to return results for.
CURRentacq specifies the Current Acquisitions as the acquisitions to return results for.
HISTory specifies the History as the acquisitions to return results for.
MAXimum specifies the Maximum as the statistic to return results for.
MINimum specifies the Minimum as the statistic to return results for.
POPUlation specifies the Population as the statistic to return results for.

HistogramHistogramItemMeasurementStddev ¶

Bases: SCPICmdWrite, SCPICmdRead

The HISTogram:HISTogram<x>:MEASurement:STDDev command.

Description

This command sets or queries whether the Standard Deviation measurement is enabled on the histogram.

Usage

Using the .query() method will send the HISTogram:HISTogram<x>:MEASurement:STDDev? query.
Using the .verify(value) method will send the HISTogram:HISTogram<x>:MEASurement:STDDev? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the HISTogram:HISTogram<x>:MEASurement:STDDev value command.

SCPI Syntax

- HISTogram:HISTogram<x>:MEASurement:STDDev {ON|OFF}
- HISTogram:HISTogram<x>:MEASurement:STDDev?

Info

HISTogram<x> specifies the histogram number.
ON enables the Standard Deviation measurement.
OFF disables the Standard Deviation measurement.

HistogramHistogramItemMeasurementThrsigma ¶

Bases: SCPICmdWrite, SCPICmdRead

The HISTogram:HISTogram<x>:MEASurement:THRSigma command.

Description

This command sets or queries whether the µ±3(sigma) measurement is enabled on the histogram.

Usage

Using the .query() method will send the HISTogram:HISTogram<x>:MEASurement:THRSigma? query.
Using the .verify(value) method will send the HISTogram:HISTogram<x>:MEASurement:THRSigma? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the HISTogram:HISTogram<x>:MEASurement:THRSigma value command.

SCPI Syntax

- HISTogram:HISTogram<x>:MEASurement:THRSigma {ON|OFF}
- HISTogram:HISTogram<x>:MEASurement:THRSigma?

Info

HISTogram<x> specifies the histogram number.
ON enables the µ±3(sigma) measurement.
OFF disables the µ±3(sigma) measurement.

HistogramHistogramItemMeasurementTwosigma ¶

Bases: SCPICmdWrite, SCPICmdRead

The HISTogram:HISTogram<x>:MEASurement:TWOSigma command.

Description

This command sets or queries whether the µ±2(sigma) measurement is enabled on the histogram.

Usage

Using the .query() method will send the HISTogram:HISTogram<x>:MEASurement:TWOSigma? query.
Using the .verify(value) method will send the HISTogram:HISTogram<x>:MEASurement:TWOSigma? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the HISTogram:HISTogram<x>:MEASurement:TWOSigma value command.

SCPI Syntax

- HISTogram:HISTogram<x>:MEASurement:TWOSigma {ON|OFF}
- HISTogram:HISTogram<x>:MEASurement:TWOSigma?

Info

HISTogram<x> specifies the histogram number.
ON enables the µ±2(sigma) measurement.
OFF disables the µ±2(sigma) measurement.

HistogramHistogramItemSave ¶

Bases: SCPICmdWrite

The HISTogram:HISTogram<x>:SAVe command.

Description

This command saves the specified histograms data as a comma separated list of values.

Usage

Using the .write(value) method will send the HISTogram:HISTogram<x>:SAVe value command.

SCPI Syntax

- HISTogram:HISTogram<x>:SAVe <QString>

Info

HISTogram<x> specifies the histogram number.
<QString> is the file path to save the .csv file to.

HistogramHistogramItemSize ¶

Bases: SCPICmdWrite, SCPICmdRead

The HISTogram:HISTogram<x>:SIZe command.

Description

This command sets or queries the height or width of the specified histogram bins in divisions. This size can be larger than the box, which allows you to view the histogram bins easily.

Usage

Using the .query() method will send the HISTogram:HISTogram<x>:SIZe? query.
Using the .verify(value) method will send the HISTogram:HISTogram<x>:SIZe? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the HISTogram:HISTogram<x>:SIZe value command.

SCPI Syntax

- HISTogram:HISTogram<x>:SIZe <NR3>
- HISTogram:HISTogram<x>:SIZe?

Info

HISTogram<x> specifies the histogram number.
<NR3> specifies the number of divisions to set the height or width of the histogram bins to.

HistogramHistogramItemSource ¶

Bases: SCPICmdWrite, SCPICmdRead

The HISTogram:HISTogram<x>:SOUrce command.

Description

This command sets or queries which source waveform will be compared against the histogram box when the histogram testing is enabled.

Usage

Using the .query() method will send the HISTogram:HISTogram<x>:SOUrce? query.
Using the .verify(value) method will send the HISTogram:HISTogram<x>:SOUrce? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the HISTogram:HISTogram<x>:SOUrce value command.

SCPI Syntax

- HISTogram:HISTogram<x>:SOUrce {S<x>_CH<x>|CH<x>|MATH<x>|REF<x>}
- HISTogram:HISTogram<x>:SOUrce?

Info

HISTogram<x> specifies the histogram number.
S<x>_CH<x> specifies is the remote scope number and the analog channel as source.
CH<x> specifies an analog channel as source.
MATH<x> specifies a math channel as source.
REF<x> specifies a reference waveform as the source.

HistogramHistogramItemState ¶

Bases: SCPICmdWrite, SCPICmdRead

The HISTogram:HISTogram<x>:STATE command.

Description

This command sets or queries whether histogram calculations are enabled for the specified histogram.

Usage

Using the .query() method will send the HISTogram:HISTogram<x>:STATE? query.
Using the .verify(value) method will send the HISTogram:HISTogram<x>:STATE? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the HISTogram:HISTogram<x>:STATE value command.

SCPI Syntax

- HISTogram:HISTogram<x>:STATE {ON|OFF}
- HISTogram:HISTogram<x>:STATE?

Info

HISTogram<x> specifies the histogram number.
ON enables the histogram calculations.
OFF disables the histogram calculations.

HistogramHistogramItemTransparency ¶

Bases: SCPICmdWrite, SCPICmdRead

The HISTogram:HISTogram<x>:TRANsparency command.

Description

This command sets or queries the transparency of the histogram bins.

Usage

Using the .query() method will send the HISTogram:HISTogram<x>:TRANsparency? query.
Using the .verify(value) method will send the HISTogram:HISTogram<x>:TRANsparency? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the HISTogram:HISTogram<x>:TRANsparency value command.

SCPI Syntax

- HISTogram:HISTogram<x>:TRANsparency <NR3>
- HISTogram:HISTogram<x>:TRANsparency?

Info

HISTogram<x> specifies the histogram number.
<NR3> specifies the transparency as a percentage, with a minimum of 0 and a maximum of 100.

HistogramList ¶

Bases: SCPICmdRead

The HISTogram:LIST command.

Description

This query returns a comma separated list of all currently defined histograms.

Usage

Using the .query() method will send the HISTogram:LIST? query.
Using the .verify(value) method will send the HISTogram:LIST? query and raise an AssertionError if the returned value does not match value.

SCPI Syntax

- HISTogram:LIST?

histogram ¶

Histogram ¶

addnew property ¶

delete property ¶

deleteall property ¶

histogram property ¶

list property ¶

HistogramAddnew ¶

HistogramDelete ¶

HistogramDeleteall ¶

HistogramHistogramItem ¶

box property ¶

bstate property ¶

data property ¶

display property ¶

function property ¶

measurement property ¶

save property ¶

size property ¶

source property ¶

state property ¶

transparency property ¶

HistogramHistogramItemBox ¶

HistogramHistogramItemBstate ¶

HistogramHistogramItemData ¶

HistogramHistogramItemDisplay ¶

HistogramHistogramItemFunction ¶

HistogramHistogramItemMeasurement ¶

count property ¶

hits property ¶

max property ¶

mean property ¶

median property ¶

min property ¶

mode property ¶

onesigma property ¶

phits property ¶

pk2pk property ¶

results property ¶

stddev property ¶

thrsigma property ¶

twosigma property ¶

HistogramHistogramItemMeasurementCount ¶

HistogramHistogramItemMeasurementHits ¶

HistogramHistogramItemMeasurementMax ¶

HistogramHistogramItemMeasurementMean ¶

HistogramHistogramItemMeasurementMedian ¶

HistogramHistogramItemMeasurementMin ¶

HistogramHistogramItemMeasurementMode ¶

HistogramHistogramItemMeasurementOnesigma ¶

HistogramHistogramItemMeasurementPhits ¶

HistogramHistogramItemMeasurementPk2pk ¶

HistogramHistogramItemMeasurementResults ¶

HistogramHistogramItemMeasurementStddev ¶

HistogramHistogramItemMeasurementThrsigma ¶

HistogramHistogramItemMeasurementTwosigma ¶

HistogramHistogramItemSave ¶

HistogramHistogramItemSize ¶

HistogramHistogramItemSource ¶

HistogramHistogramItemState ¶

HistogramHistogramItemTransparency ¶

HistogramList ¶

addnew `property` ¶

delete `property` ¶

deleteall `property` ¶

histogram `property` ¶

list `property` ¶

box `property` ¶

bstate `property` ¶

data `property` ¶

display `property` ¶

function `property` ¶

measurement `property` ¶

save `property` ¶

size `property` ¶

source `property` ¶

state `property` ¶

transparency `property` ¶

count `property` ¶

hits `property` ¶

max `property` ¶

mean `property` ¶

median `property` ¶

min `property` ¶

mode `property` ¶

onesigma `property` ¶

phits `property` ¶

pk2pk `property` ¶

results `property` ¶

stddev `property` ¶

thrsigma `property` ¶

twosigma `property` ¶