bus ¶

The bus commands module.

These commands are used in the following models: TekScopePC

THIS FILE IS AUTO-GENERATED, IT SHOULD NOT BE MANUALLY MODIFIED.

Please report an issue if one is found.

Commands and Queries

- BUS:ADDNew <QString>
- BUS:B<x>:ARINC429A:BITRate {LOW|HI|CUSTom}
- BUS:B<x>:ARINC429A:BITRate:CUSTom <NR1>
- BUS:B<x>:ARINC429A:BITRate:CUSTom?
- BUS:B<x>:ARINC429A:BITRate?
- BUS:B<x>:ARINC429A:DATAFORmat {DATA|SDIDATA|SDIDATASSM}
- BUS:B<x>:ARINC429A:DATAFORmat?
- BUS:B<x>:ARINC429A:POLARITY {NORMal|INVERTed}
- BUS:B<x>:ARINC429A:POLARITY?
- BUS:B<x>:ARINC429A:SOUrce {S<x>_Ch<x>|CH<x>|Math<x>|REF<x>}
- BUS:B<x>:ARINC429A:SOUrce?
- BUS:B<x>:ARINC429A:THRESHold <NR3>
- BUS:B<x>:ARINC429A:THRESHold?
- BUS:B<x>:AUDio:BITDelay <NR1>
- BUS:B<x>:AUDio:BITDelay?
- BUS:B<x>:AUDio:BITOrder {MSB|LSB}
- BUS:B<x>:AUDio:BITOrder?
- BUS:B<x>:AUDio:CLOCk:POLarity {FALL|RISE}
- BUS:B<x>:AUDio:CLOCk:POLarity?
- BUS:B<x>:AUDio:CLOCk:SOUrce {S<x>_Ch<x>_D<x>|CH<x>|CH<x>_D<x>|Math<x>|REF<x>|REF<x>_D<x>}
- BUS:B<x>:AUDio:CLOCk:SOUrce?
- BUS:B<x>:AUDio:CLOCk:THReshold <NR3>
- BUS:B<x>:AUDio:CLOCk:THReshold?
- BUS:B<x>:AUDio:DATa:POLarity {HIGH|LOW}
- BUS:B<x>:AUDio:DATa:POLarity?
- BUS:B<x>:AUDio:DATa:SIZe <NR1>
- BUS:B<x>:AUDio:DATa:SIZe?
- BUS:B<x>:AUDio:DATa:SOUrce {S<x>_Ch<x>_D<x>|CH<x>|CH<x>_D<x>|MATH<x>|REF<x>|REF<x>_D<x>}
- BUS:B<x>:AUDio:DATa:SOUrce?
- BUS:B<x>:AUDio:DATa:THReshold <NR3>
- BUS:B<x>:AUDio:DATa:THReshold?
- BUS:B<x>:AUDio:DATa:WORDSize <NR1>
- BUS:B<x>:AUDio:DATa:WORDSize?
- BUS:B<x>:AUDio:FRAME:CLOCKBITSPERCHANNEL <NR1>
- BUS:B<x>:AUDio:FRAME:CLOCKBITSPERCHANNEL?
- BUS:B<x>:AUDio:FRAME:SIZe <NR1>
- BUS:B<x>:AUDio:FRAME:SIZe?
- BUS:B<x>:AUDio:TYPe {I2S|LJ|RJ|TDM}
- BUS:B<x>:AUDio:TYPe?
- BUS:B<x>:AUDio:WORDSel:POLarity {NORMal|INVERTed}
- BUS:B<x>:AUDio:WORDSel:POLarity?
- BUS:B<x>:AUDio:WORDSel:SOUrce {S<x>_Ch<x>_D<x>|CH<x>|CH<x>_D<x>|MATH<x>|REF<x>|REF<x>_D<x>}
- BUS:B<x>:AUDio:WORDSel:SOUrce?
- BUS:B<x>:AUDio:WORDSel:THReshold <NR3>
- BUS:B<x>:AUDio:WORDSel:THReshold?
- BUS:B<x>:AUTOETHERnet:DATAMINUSTHRESHOLD <NR3>
- BUS:B<x>:AUTOETHERnet:DATAMINUSTHRESHOLD?
- BUS:B<x>:AUTOETHERnet:DATAPLUSTHRESHold <NR3>
- BUS:B<x>:AUTOETHERnet:DATAPLUSTHRESHold?
- BUS:B<x>:AUTOETHERnet:LOWDATAMINus <NR3>
- BUS:B<x>:AUTOETHERnet:LOWDATAMINus?
- BUS:B<x>:AUTOETHERnet:LOWDATAPLUS <NR3>
- BUS:B<x>:AUTOETHERnet:LOWDATAPLUS?
- BUS:B<x>:AUTOETHERnet:LOWTHRESHold <NR3>
- BUS:B<x>:AUTOETHERnet:LOWTHRESHold?
- BUS:B<x>:AUTOETHERnet:SIGNALTYpe {SINGLE|DIFF}
- BUS:B<x>:AUTOETHERnet:SIGNALTYpe?
- BUS:B<x>:AUTOETHERnet:SOUrce {S<x>_Ch<x>|CH<x>|MATH<x>|REF<x<>}
- BUS:B<x>:AUTOETHERnet:SOUrce:DMINus {S<x>_Ch<x>|CH<x>|MATH<x>|REF<x<>}
- BUS:B<x>:AUTOETHERnet:SOUrce:DMINus?
- BUS:B<x>:AUTOETHERnet:SOUrce:DPLUs {S<x>_Ch<x>|CH<x>|MATH<x>|REF<x<>}
- BUS:B<x>:AUTOETHERnet:SOUrce:DPLUs?
- BUS:B<x>:AUTOETHERnet:SOUrce?
- BUS:B<x>:AUTOETHERnet:THRESHold <NR3>
- BUS:B<x>:AUTOETHERnet:THRESHold?
- BUS:B<x>:AUTOETHERnet:TYPe {HUNDREDBASET1}
- BUS:B<x>:AUTOETHERnet:TYPe?
- BUS:B<x>:CAN:BITRate {RATE10K|RATE100K|RATE1M|RATE125K|RATE153K|RATE20K|RATE25K|RATE250K|RATE31K|RATE33K|RATE400K|RATE50K|RATE500K|RATE62K|RATE68K|RATE800K|RATE83K|RATE92K|CUSTom}
- BUS:B<x>:CAN:BITRate:VALue <NR3>
- BUS:B<x>:CAN:BITRate:VALue?
- BUS:B<x>:CAN:BITRate?
- BUS:B<x>:CAN:FD:BITRate {RATE1M|RATE2M|RATE3M|RATE4M|RATE5M|RATE6M|RATE7M|RATE8M|RATE9M|RATE10M|RATE11M|RATE12M|RATE13M|RATE14M|RATE15M|RATE16M|CUSTom}
- BUS:B<x>:CAN:FD:BITRate:CUSTom <NR1>
- BUS:B<x>:CAN:FD:BITRate:CUSTom?
- BUS:B<x>:CAN:FD:BITRate?
- BUS:B<x>:CAN:SAMPLEpoint <NR1>
- BUS:B<x>:CAN:SAMPLEpoint?
- BUS:B<x>:CAN:SIGNal {DIFFerential|CANH|CANL|RX|TX}
- BUS:B<x>:CAN:SIGNal?
- BUS:B<x>:CAN:SOUrce {S<x>_Ch<x>_D<x>|CH<x>|CH<x>_D<x>|MATH<x>|REF<x>|REF<x>_D<x>}
- BUS:B<x>:CAN:SOUrce?
- BUS:B<x>:CAN:STANDard {CAN2X|FDISO|FDNONISO}
- BUS:B<x>:CAN:STANDard?
- BUS:B<x>:CAN:THReshold <NR3>
- BUS:B<x>:CAN:THReshold?
- BUS:B<x>:CPHY:A:DATA:THRESHold <NR3>
- BUS:B<x>:CPHY:A:DATA:THRESHold?
- BUS:B<x>:CPHY:A:LP:THRESHold <NR3>
- BUS:B<x>:CPHY:A:LP:THRESHold?
- BUS:B<x>:CPHY:A:SOUrce {S<x>_Ch<x>|CH<x>|MATH<x>|REF<x>}
- BUS:B<x>:CPHY:A:SOUrce?
- BUS:B<x>:CPHY:AB:SOUrce {S<x>_Ch<x>|CH<x>|MATH<x>|REF<x>}
- BUS:B<x>:CPHY:AB:SOUrce?
- BUS:B<x>:CPHY:AB:THReshold <NR3>
- BUS:B<x>:CPHY:AB:THReshold?
- BUS:B<x>:CPHY:AGND:SOUrce {S<x>_Ch<x>|CH<x>|MATH<x>|REF<x>}
- BUS:B<x>:CPHY:AGND:SOUrce?
- BUS:B<x>:CPHY:AGND:THReshold <NR3>
- BUS:B<x>:CPHY:AGND:THReshold?
- BUS:B<x>:CPHY:B:DATA:THRESHold <NR3>
- BUS:B<x>:CPHY:B:DATA:THRESHold?
- BUS:B<x>:CPHY:B:SOUrce {S<x>_Ch<x>|CH<x>|MATH<x>|REF<x>}
- BUS:B<x>:CPHY:B:SOUrce?
- BUS:B<x>:CPHY:BC:SOUrce {S<x>_Ch<x>|CH<x>|MATH<x>|REF<x>}
- BUS:B<x>:CPHY:BC:SOUrce?
- BUS:B<x>:CPHY:BC:THReshold <NR3>
- BUS:B<x>:CPHY:BC:THReshold?
- BUS:B<x>:CPHY:BITRate <NR1>
- BUS:B<x>:CPHY:BITRate?
- BUS:B<x>:CPHY:C:DATA:THRESHold <NR3>
- BUS:B<x>:CPHY:C:DATA:THRESHold?
- BUS:B<x>:CPHY:C:LP:THRESHold <NR3>
- BUS:B<x>:CPHY:C:LP:THRESHold?
- BUS:B<x>:CPHY:C:SOUrce {S<x>_Ch<x>|CH<x>|MATH<x>|REF<x>}
- BUS:B<x>:CPHY:C:SOUrce?
- BUS:B<x>:CPHY:CA:SOUrce {S<x>_Ch<x>|CH<x>|MATH<x>|REF<x>}
- BUS:B<x>:CPHY:CA:SOUrce?
- BUS:B<x>:CPHY:CA:THReshold <NR3>
- BUS:B<x>:CPHY:CA:THReshold?
- BUS:B<x>:CPHY:CGND:SOUrce {S<x>_Ch<x>|CH<x>|MATH<x>|REF<x>}
- BUS:B<x>:CPHY:CGND:SOUrce?
- BUS:B<x>:CPHY:CGND:THReshold <NR3>
- BUS:B<x>:CPHY:CGND:THReshold?
- BUS:B<x>:CPHY:LP:DIRection {forward|reverse}
- BUS:B<x>:CPHY:LP:DIRection?
- BUS:B<x>:CPHY:SIGNALTYpe {SINGLE|DIFF}
- BUS:B<x>:CPHY:SIGNALTYpe?
- BUS:B<x>:CPHY:SUBTYPe {CSI|DSI|Word|Symbol}
- BUS:B<x>:CPHY:SUBTYPe?
- BUS:B<x>:CXPI:BITRate <NR1>
- BUS:B<x>:CXPI:BITRate?
- BUS:B<x>:CXPI:REC:THReshold <NR3>
- BUS:B<x>:CXPI:REC:THReshold?
- BUS:B<x>:CXPI:SOUrce {S<x>_Ch<x>|CH<x>|MATH<x>|REF<x>}
- BUS:B<x>:CXPI:SOUrce?
- BUS:B<x>:DISplay:FORMat {HEX|BINARY|MIXEDASCII|MIXEDHEX|ASCII|DECIMAL|MIXED}
- BUS:B<x>:DISplay:FORMat?
- BUS:B<x>:DISplay:LAYout {BUS|BUSANDWAVEFORM}
- BUS:B<x>:DISplay:LAYout?
- BUS:B<x>:DPHY:CLOCk:SOUrce {S<x>_Ch<x>|CH<x>|MATH<x>|REF<x<>}
- BUS:B<x>:DPHY:CLOCk:SOUrce?
- BUS:B<x>:DPHY:CLOCk:THRESHold <NR3>
- BUS:B<x>:DPHY:CLOCk:THRESHold?
- BUS:B<x>:DPHY:DMINus:DATATHRESHold <NR3>
- BUS:B<x>:DPHY:DMINus:DATATHRESHold?
- BUS:B<x>:DPHY:DMINus:LPTHRESHold <NR3>
- BUS:B<x>:DPHY:DMINus:LPTHRESHold?
- BUS:B<x>:DPHY:DMINus:SOUrce {S<x>_Ch<x>|CH<x>|MATH<x>|REF<x<>}
- BUS:B<x>:DPHY:DMINus:SOUrce?
- BUS:B<x>:DPHY:DPlus:DATATHRESHold <NR3>
- BUS:B<x>:DPHY:DPlus:DATATHRESHold?
- BUS:B<x>:DPHY:DPlus:LPTHRESHold <NR3>
- BUS:B<x>:DPHY:DPlus:LPTHRESHold?
- BUS:B<x>:DPHY:DPlus:SOUrce {S<x>_Ch<x>|CH<x>|MATH<x>|REF<x<>}
- BUS:B<x>:DPHY:DPlus:SOUrce?
- BUS:B<x>:DPHY:LP:DIRection {forward|reverse}
- BUS:B<x>:DPHY:LP:DIRection?
- BUS:B<x>:DPHY:PROTocol:TYPe {CSI|DSI}
- BUS:B<x>:DPHY:PROTocol:TYPe?
- BUS:B<x>:DPHY:SIGNal:ENCoding {false|true}
- BUS:B<x>:DPHY:SIGNal:ENCoding?
- BUS:B<x>:ESPI:ALERTVIEW {ON|OFF}
- BUS:B<x>:ESPI:ALERTVIEW?
- BUS:B<x>:ESPI:ALERt:POLarity {HIGH|LOW}
- BUS:B<x>:ESPI:ALERt:POLarity?
- BUS:B<x>:ESPI:ALERt:SOUrce {S<x>_Ch<x>|CH<x>|MATH<x>|REF<x<>}
- BUS:B<x>:ESPI:ALERt:SOUrce?
- BUS:B<x>:ESPI:ALERt:THReshold <NR3>
- BUS:B<x>:ESPI:ALERt:THReshold?
- BUS:B<x>:ESPI:CHIPSELect:POLarity {HIGH|LOW}
- BUS:B<x>:ESPI:CHIPSELect:POLarity?
- BUS:B<x>:ESPI:CHIPSELect:SOUrce {S<x>_Ch<x>|CH<x>|MATH<x>|REF<x<>}
- BUS:B<x>:ESPI:CHIPSELect:SOUrce?
- BUS:B<x>:ESPI:CHIPSELect:THReshold <NR3>
- BUS:B<x>:ESPI:CHIPSELect:THReshold?
- BUS:B<x>:ESPI:CLOCk:POLarity {FALL|RISE}
- BUS:B<x>:ESPI:CLOCk:POLarity?
- BUS:B<x>:ESPI:CLOCk:SOUrce {S<x>_Ch<x>|CH<x>|MATH<x>|REF<x<>}
- BUS:B<x>:ESPI:CLOCk:SOUrce?
- BUS:B<x>:ESPI:CLOCk:THReshold <NR3>
- BUS:B<x>:ESPI:CLOCk:THReshold?
- BUS:B<x>:ESPI:DATAONE:POLarity {HIGH|LOW}
- BUS:B<x>:ESPI:DATAONE:POLarity?
- BUS:B<x>:ESPI:DATAONE:SOUrce {S<x>_Ch<x>|CH<x>|MATH<x>|REF<x<>}
- BUS:B<x>:ESPI:DATAONE:SOUrce?
- BUS:B<x>:ESPI:DATAONE:THReshold <NR3>
- BUS:B<x>:ESPI:DATAONE:THReshold?
- BUS:B<x>:ESPI:DATATWO:POLarity {HIGH|LOW}
- BUS:B<x>:ESPI:DATATWO:POLarity?
- BUS:B<x>:ESPI:DATATWO:SOUrce {S<x>_Ch<x>|CH<x>|MATH<x>|REF<x<>}
- BUS:B<x>:ESPI:DATATWO:SOUrce?
- BUS:B<x>:ESPI:DATATWO:THReshold <NR3>
- BUS:B<x>:ESPI:DATATWO:THReshold?
- BUS:B<x>:ESPI:IOMODe {SINGle|DUAL}
- BUS:B<x>:ESPI:IOMODe?
- BUS:B<x>:ETHERCAT:DATAMINUSTHRESHold <NR3>
- BUS:B<x>:ETHERCAT:DATAMINUSTHRESHold?
- BUS:B<x>:ETHERCAT:DATAPLUSTHRESHold <NR3>
- BUS:B<x>:ETHERCAT:DATAPLUSTHRESHold?
- BUS:B<x>:ETHERCAT:SIGNALTYpe {SINGLE|DIFF}
- BUS:B<x>:ETHERCAT:SIGNALTYpe?
- BUS:B<x>:ETHERCAT:SOUrce:DIFF {S<x>_Ch<x>|CH<x>|MATH<x>|REF<x>}
- BUS:B<x>:ETHERCAT:SOUrce:DIFF?
- BUS:B<x>:ETHERCAT:SOUrce:DMINus {S<x>_Ch<x>|CH<x>|MATH<x>|REF<x>}
- BUS:B<x>:ETHERCAT:SOUrce:DMINus?
- BUS:B<x>:ETHERCAT:SOUrce:DPLUs {S<x>_Ch<x>|CH<x>|MATH<x>|REF<x>}
- BUS:B<x>:ETHERCAT:SOUrce:DPLUs?
- BUS:B<x>:ETHERCAT:THRESHold <NR3>
- BUS:B<x>:ETHERCAT:THRESHold?
- BUS:B<x>:ETHERnet:DATAMINUSTHRESHold <NR3>
- BUS:B<x>:ETHERnet:DATAMINUSTHRESHold?
- BUS:B<x>:ETHERnet:DATAPLUSTHRESHold <NR3>
- BUS:B<x>:ETHERnet:DATAPLUSTHRESHold?
- BUS:B<x>:ETHERnet:IPVFOUR {YES|NO}
- BUS:B<x>:ETHERnet:IPVFOUR?
- BUS:B<x>:ETHERnet:LOWTHRESHold <NR3>
- BUS:B<x>:ETHERnet:LOWTHRESHold?
- BUS:B<x>:ETHERnet:QTAGGING {YES|NO}
- BUS:B<x>:ETHERnet:QTAGGING?
- BUS:B<x>:ETHERnet:SIGNALTYpe {SINGLE|DIFF}
- BUS:B<x>:ETHERnet:SIGNALTYpe?
- BUS:B<x>:ETHERnet:SOUrce {S<x>_Ch<x>|CH<x>|MATH<x>|REF<x>}
- BUS:B<x>:ETHERnet:SOUrce:DMINus {S<x>_Ch<x>|CH<x>|MATH<x>|REF<x>}
- BUS:B<x>:ETHERnet:SOUrce:DMINus?
- BUS:B<x>:ETHERnet:SOUrce:DPLUs {S<x>_Ch<x>|CH<x>|MATH<x>|REF<x>}
- BUS:B<x>:ETHERnet:SOUrce:DPLUs?
- BUS:B<x>:ETHERnet:SOUrce?
- BUS:B<x>:ETHERnet:THRESHold <NR3>
- BUS:B<x>:ETHERnet:THRESHold?
- BUS:B<x>:ETHERnet:TYPe {TENBASET|HUNDREDBASETX}
- BUS:B<x>:ETHERnet:TYPe?
- BUS:B<x>:EUSB:BITRate {HIGH|FULL|LOW}
- BUS:B<x>:EUSB:BITRate?
- BUS:B<x>:EUSB:DATAMINUS:DATA:THRESHold <NR3>
- BUS:B<x>:EUSB:DATAMINUS:DATA:THRESHold?
- BUS:B<x>:EUSB:DATAMINUSTHRESHold <NR3>
- BUS:B<x>:EUSB:DATAMINUSTHRESHold?
- BUS:B<x>:EUSB:DATAPLUS:DATA:THRESHold <NR3>
- BUS:B<x>:EUSB:DATAPLUS:DATA:THRESHold?
- BUS:B<x>:EUSB:DATAPLUSTHRESHold <NR3>
- BUS:B<x>:EUSB:DATAPLUSTHRESHold?
- BUS:B<x>:EUSB:LOWTHRESHold <NR3>
- BUS:B<x>:EUSB:LOWTHRESHold?
- BUS:B<x>:EUSB:OPERating:MODe {NATive|REPEATERHOSt|REPEATERPERIPHERAL}
- BUS:B<x>:EUSB:OPERating:MODe?
- BUS:B<x>:EUSB:SIGNALTYpe {SINGLE|DIFF}
- BUS:B<x>:EUSB:SIGNALTYpe?
- BUS:B<x>:EUSB:SOUrce:DIFF {S<x>_Ch<x>|CH<x>|MATH<x>|REF<x>}
- BUS:B<x>:EUSB:SOUrce:DIFF?
- BUS:B<x>:EUSB:SOUrce:DMINus {S<x>_Ch<x>|CH<x>|MATH<x>|REF<x>}
- BUS:B<x>:EUSB:SOUrce:DMINus?
- BUS:B<x>:EUSB:SOUrce:DPLUs {S<x>_Ch<x>|CH<x>|MATH<x>|REF<x>}
- BUS:B<x>:EUSB:SOUrce:DPLUs?
- BUS:B<x>:EUSB:THRESHold <NR3>
- BUS:B<x>:EUSB:THRESHold?
- BUS:B<x>:FLEXray:BITRate {CUSTOM|RATE2M|RATE5M|RATE10M}
- BUS:B<x>:FLEXray:BITRate:CUSTom <NR1>
- BUS:B<x>:FLEXray:BITRate:CUSTom?
- BUS:B<x>:FLEXray:BITRate?
- BUS:B<x>:FLEXray:CHannel {A|B}
- BUS:B<x>:FLEXray:CHannel?
- BUS:B<x>:FLEXray:LOWTHRESHold <NR3>
- BUS:B<x>:FLEXray:LOWTHRESHold?
- BUS:B<x>:FLEXray:SIGnal {BDIFFBP|BM|TXRX}
- BUS:B<x>:FLEXray:SIGnal?
- BUS:B<x>:FLEXray:SOUrce {S<x>_Ch<x>|CH<x>|MATH<x>|REF<x>}
- BUS:B<x>:FLEXray:SOUrce:TXRX {S<x>_Ch<x>_D<x>|CH<x>|CH<x>_D<x>|MATH<x>|REF<x>|REF<x>_D<x>}
- BUS:B<x>:FLEXray:SOUrce:TXRX?
- BUS:B<x>:FLEXray:SOUrce?
- BUS:B<x>:FLEXray:THRESHold <NR3>
- BUS:B<x>:FLEXray:THRESHold?
- BUS:B<x>:FLEXray:TXRXTHRESHold <NR3>
- BUS:B<x>:FLEXray:TXRXTHRESHold?
- BUS:B<x>:I2C:CLOCk:SOUrce {S<x>_Ch<x>_D<x>|CH<x>|CH<x>_D<x>|MATH<x>|REF<x>|REF<x>_D<x>}
- BUS:B<x>:I2C:CLOCk:SOUrce?
- BUS:B<x>:I2C:CLOCk:THReshold <NR3>
- BUS:B<x>:I2C:CLOCk:THReshold?
- BUS:B<x>:I2C:DATa:SOUrce {S<x>_Ch<x>_D<x>|CH<x>|CH<x>_D<x>|MATH<x>|REF<x>|REF<x>_D<x>}
- BUS:B<x>:I2C:DATa:SOUrce?
- BUS:B<x>:I2C:DATa:THReshold <NR3>
- BUS:B<x>:I2C:DATa:THReshold?
- BUS:B<x>:I2C:RWINADDR {0|1}
- BUS:B<x>:I2C:RWINADDR?
- BUS:B<x>:I3C:CLOCk:SOUrce {S<x>_Ch<x>_D<x>|CH<x>|CH<x>_D<x>|MATH<x>|REF<x>|REF<x>_D<x>}
- BUS:B<x>:I3C:CLOCk:SOUrce?
- BUS:B<x>:I3C:CLOCk:THReshold <NR3>
- BUS:B<x>:I3C:CLOCk:THReshold?
- BUS:B<x>:I3C:DATa:SOUrce {S<x>_Ch<x>_D<x>|CH<x>|CH<x>_D<x>|MATH<x>|REF<x>|REF<x>_D<x>}
- BUS:B<x>:I3C:DATa:SOUrce?
- BUS:B<x>:I3C:DATa:THReshold {S<x>_Ch<x>_D<x>|CH<x>|CH<x>_D<x>|MATH<x>|REF<x>|REF<x>_D<x>}
- BUS:B<x>:I3C:DATa:THReshold?
- BUS:B<x>:LABel:COLor <QString>
- BUS:B<x>:LABel:COLor?
- BUS:B<x>:LABel:FONT:BOLD {ON|OFF|1|0}
- BUS:B<x>:LABel:FONT:BOLD?
- BUS:B<x>:LABel:FONT:ITALic {ON|OFF|1|0}
- BUS:B<x>:LABel:FONT:ITALic?
- BUS:B<x>:LABel:FONT:SIZE <NR1>
- BUS:B<x>:LABel:FONT:SIZE?
- BUS:B<x>:LABel:FONT:TYPE <QString>
- BUS:B<x>:LABel:FONT:TYPE?
- BUS:B<x>:LABel:FONT:UNDERline {ON|OFF|1|0}
- BUS:B<x>:LABel:FONT:UNDERline?
- BUS:B<x>:LABel:XPOS <NR3>
- BUS:B<x>:LABel:XPOS?
- BUS:B<x>:LABel:YPOS <NR3>
- BUS:B<x>:LABel:YPOS?
- BUS:B<x>:LABel:name <QString>
- BUS:B<x>:LABel:name?
- BUS:B<x>:LIN:BITRate {RATE10K|RATE1K|RATE19K|RATE2K|RATE4K|RATE9K|CUSTom}
- BUS:B<x>:LIN:BITRate:CUSTom <NR1>
- BUS:B<x>:LIN:BITRate:CUSTom?
- BUS:B<x>:LIN:BITRate?
- BUS:B<x>:LIN:IDFORmat {NOPARity|PARity}
- BUS:B<x>:LIN:IDFORmat?
- BUS:B<x>:LIN:POLarity {INVerted|NORmal}
- BUS:B<x>:LIN:POLarity?
- BUS:B<x>:LIN:SAMPLEpoint <NR1>
- BUS:B<x>:LIN:SAMPLEpoint?
- BUS:B<x>:LIN:SOUrce {S<x>_Ch<x>_D<x>|CH<x>|CH<x>_D<x>|MATH<x>|REF<x>|REF<x>_D<x>}
- BUS:B<x>:LIN:SOUrce:THReshold <NR3>
- BUS:B<x>:LIN:SOUrce:THReshold?
- BUS:B<x>:LIN:SOUrce?
- BUS:B<x>:LIN:STANDard {MIXed|V1X|V2X}
- BUS:B<x>:LIN:STANDard?
- BUS:B<x>:MANChester:BITORDer {LSB|MSB}
- BUS:B<x>:MANChester:BITORDer?
- BUS:B<x>:MANChester:BITRate <NR1>
- BUS:B<x>:MANChester:BITRate?
- BUS:B<x>:MANChester:DISplaymode {BITS|PACKET}
- BUS:B<x>:MANChester:DISplaymode?
- BUS:B<x>:MANChester:HEADer:LENGth <NR1>
- BUS:B<x>:MANChester:HEADer:LENGth?
- BUS:B<x>:MANChester:IDLE:BITS <NR1>
- BUS:B<x>:MANChester:IDLE:BITS?
- BUS:B<x>:MANChester:SOUrce {S<x>_Ch<x>|CH<x>|MATH<x>|REF<x>}
- BUS:B<x>:MANChester:SOUrce?
- BUS:B<x>:MANChester:START:INDex <NR1>
- BUS:B<x>:MANChester:START:INDex?
- BUS:B<x>:MANChester:SYNC:SIZe <NR1>
- BUS:B<x>:MANChester:SYNC:SIZe?
- BUS:B<x>:MANChester:THReshold <NR3>
- BUS:B<x>:MANChester:THReshold?
- BUS:B<x>:MANChester:TOLerance <NR3>
- BUS:B<x>:MANChester:TOLerance?
- BUS:B<x>:MANChester:TRANstion:ZERo {FALLing|RISing}
- BUS:B<x>:MANChester:TRANstion:ZERo?
- BUS:B<x>:MANChester:TRAiler:LENGth <NR1>
- BUS:B<x>:MANChester:TRAiler:LENGth?
- BUS:B<x>:MANChester:WORD:COUNt <NR1>
- BUS:B<x>:MANChester:WORD:COUNt?
- BUS:B<x>:MANChester:WORDSIZe <NR1>
- BUS:B<x>:MANChester:WORDSIZe?
- BUS:B<x>:MANChester:parity {ODD|EVEN|NONE}
- BUS:B<x>:MANChester:parity?
- BUS:B<x>:MDIO:CLOCk:SOUrce {S<x>_Ch<x>|CH<x>|MATH<x>|REF<x>}
- BUS:B<x>:MDIO:CLOCk:SOUrce?
- BUS:B<x>:MDIO:CLOCk:THReshold <NR3>
- BUS:B<x>:MDIO:CLOCk:THReshold?
- BUS:B<x>:MDIO:DATA:SOUrce {S<x>_Ch<x>|CH<x>|MATH<x>|REF<x>}
- BUS:B<x>:MDIO:DATA:SOUrce?
- BUS:B<x>:MDIO:DATA:THReshold <NR3>
- BUS:B<x>:MDIO:DATA:THReshold?
- BUS:B<x>:MIL1553B:LOWTHRESHold <NR3>
- BUS:B<x>:MIL1553B:LOWTHRESHold?
- BUS:B<x>:MIL1553B:POLarity {NORMal|INVERTed}
- BUS:B<x>:MIL1553B:POLarity?
- BUS:B<x>:MIL1553B:RESPonsetime:MAXimum <NR3>
- BUS:B<x>:MIL1553B:RESPonsetime:MAXimum?
- BUS:B<x>:MIL1553B:RESPonsetime:MINimum <NR3>
- BUS:B<x>:MIL1553B:RESPonsetime:MINimum?
- BUS:B<x>:MIL1553B:SOUrce {S<x>_Ch<x>|CH<x>|MATH<x>|REF<x>}
- BUS:B<x>:MIL1553B:SOUrce?
- BUS:B<x>:MIL1553B:THRESHold <NR3>
- BUS:B<x>:MIL1553B:THRESHold?
- BUS:B<x>:NRZ:BITOrder {LSB|MSB}
- BUS:B<x>:NRZ:BITOrder?
- BUS:B<x>:NRZ:BITRate <NR1>
- BUS:B<x>:NRZ:BITRate?
- BUS:B<x>:NRZ:POLarity {INVerted|NORmal}
- BUS:B<x>:NRZ:POLarity?
- BUS:B<x>:NRZ:SOUrce {S<x>_Ch<x>|CH<x>|MATH<x>|REF<x>]
- BUS:B<x>:NRZ:SOUrce?
- BUS:B<x>:NRZ:SPMI:VERsion {v<x>}
- BUS:B<x>:NRZ:SPMI:VERsion?
- BUS:B<x>:NRZ:THReshold <NR3>
- BUS:B<x>:NRZ:THReshold?
- BUS:B<x>:ONEWIRe:DATA:SOUrce {S<x>_Ch<x>|CH<x>|MATH<x>|REF<x>]
- BUS:B<x>:ONEWIRe:DATA:SOUrce?
- BUS:B<x>:ONEWIRe:DATA:THReshold <NR3>
- BUS:B<x>:ONEWIRe:DATA:THReshold?
- BUS:B<x>:ONEWIRe:MODe {STAndard|OVErdrive}
- BUS:B<x>:ONEWIRe:MODe?
- BUS:B<x>:PARallel:ALLTHResholds <NR3>
- BUS:B<x>:PARallel:ALLTHResholds:APPly
- BUS:B<x>:PARallel:BIT<n>SOUrce {S<x>_Ch<x>_D|CH<x>|CH<x>_D<x>|MATH<x>|REF<x>|REF<x>_D<x>|NONE}
- BUS:B<x>:PARallel:BIT<n>SOUrce:THReshold <NR3>
- BUS:B<x>:PARallel:CLOCk:EDGE {FALLING|RISING|EITHER}
- BUS:B<x>:PARallel:CLOCk:EDGE?
- BUS:B<x>:PARallel:CLOCk:ISCLOCKED {OFF|ON|NR1>
- BUS:B<x>:PARallel:CLOCk:ISCLOCKED?
- BUS:B<x>:PARallel:CLOCkSOUrce {S<x>_Ch<x>_D<x>|CH<x>|CH<x>_D<x>|MATH<x>|REF<x>|REF<x>_D<x>|NONE}
- BUS:B<x>:PARallel:CLOCkSOUrce:THReshold <NR3>
- BUS:B<x>:PARallel:CLOCkSOUrce:THReshold?
- BUS:B<x>:PARallel:CLOCkSOUrce?
- BUS:B<x>:PSIFIVe:BITPERiod <NR1>
- BUS:B<x>:PSIFIVe:BITPERiod?
- BUS:B<x>:PSIFIVe:BITRate {RATE125K|RATE189K|RATE83K}
- BUS:B<x>:PSIFIVe:BITRate?
- BUS:B<x>:PSIFIVe:COMM:DIRection {SENSORECU|ECUSENSor}
- BUS:B<x>:PSIFIVe:COMM:DIRection?
- BUS:B<x>:PSIFIVe:DATAA <NR1>
- BUS:B<x>:PSIFIVe:DATAA?
- BUS:B<x>:PSIFIVe:DATAB <NR1>
- BUS:B<x>:PSIFIVe:DATAB?
- BUS:B<x>:PSIFIVe:DATAFORMat {NIBBLe|BYTe}
- BUS:B<x>:PSIFIVe:DATAFORMat?
- BUS:B<x>:PSIFIVe:ECUSOURce {S<x>_Ch<x>|CH<x>|MATH<x>|REF<x>}
- BUS:B<x>:PSIFIVe:ECUSOURce?
- BUS:B<x>:PSIFIVe:FRAMECONTrol <NR1>
- BUS:B<x>:PSIFIVe:FRAMECONTrol?
- BUS:B<x>:PSIFIVe:MESSaging {OFF|ON}
- BUS:B<x>:PSIFIVe:MESSaging?
- BUS:B<x>:PSIFIVe:SOUrce {S<x>_Ch<x>|CH<x>|MATH<x>|REF<x>}
- BUS:B<x>:PSIFIVe:SOUrce?
- BUS:B<x>:PSIFIVe:STATus <NR1>
- BUS:B<x>:PSIFIVe:STATus?
- BUS:B<x>:PSIFIVe:SYNCMODe {PULSEWIDTh|TOOTHGAP}
- BUS:B<x>:PSIFIVe:SYNCMODe?
- BUS:B<x>:PSIFIVe:SYNCTHRESHold <NR3>
- BUS:B<x>:PSIFIVe:SYNCTHRESHold?
- BUS:B<x>:PSIFIVe:THRESHold <NR3>
- BUS:B<x>:PSIFIVe:THRESHold?
- BUS:B<x>:RS232C:BITRate {CUSTOM|RATE300|RATE1K|RATE2K|RATE9K|RATE19K|RATE38K|RATE115K|RATE921K}
- BUS:B<x>:RS232C:BITRate:CUSTom <NR1>
- BUS:B<x>:RS232C:BITRate:CUSTom?
- BUS:B<x>:RS232C:BITRate?
- BUS:B<x>:RS232C:DATABits {7|8|9}
- BUS:B<x>:RS232C:DATABits?
- BUS:B<x>:RS232C:DELIMiter {NULl|CR|LF|SPace|XFF}
- BUS:B<x>:RS232C:DELIMiter?
- BUS:B<x>:RS232C:DISplaymode {FRame|PACKET}
- BUS:B<x>:RS232C:DISplaymode?
- BUS:B<x>:RS232C:PARity {NONe|EVEN|ODD}
- BUS:B<x>:RS232C:PARity?
- BUS:B<x>:RS232C:POLarity {NORmal|INVERTed}
- BUS:B<x>:RS232C:POLarity?
- BUS:B<x>:RS232C:SOUrce {S<x>_Ch<x>_D<x>|CH<x>|CH<x>_D<x>|REF<x>|MATH<x>|REF<x>_D<x>}
- BUS:B<x>:RS232C:SOUrce:THReshold <NR3>
- BUS:B<x>:RS232C:SOUrce:THReshold?
- BUS:B<x>:RS232C:SOUrce?
- BUS:B<x>:S8B10B:BITRate <NR1>
- BUS:B<x>:S8B10B:BITRate?
- BUS:B<x>:S8B10B:SOUrce {S<x>_Ch<x>|CH<x>|MATH<x>|REF<x>}
- BUS:B<x>:S8B10B:SOUrce?
- BUS:B<x>:S8B10B:THReshold <NR3>
- BUS:B<x>:S8B10B:THReshold?
- BUS:B<x>:SDLC:BITRate <NR1>
- BUS:B<x>:SDLC:BITRate?
- BUS:B<x>:SDLC:DATA:SOUrce {S<x>_Ch<x>|CH<x>|MATH<x>|REF<x>}
- BUS:B<x>:SDLC:DATA:SOUrce?
- BUS:B<x>:SDLC:DATA:THReshold <NR3>
- BUS:B<x>:SDLC:DATA:THReshold?
- BUS:B<x>:SDLC:ENCoding {DISCrete|INVert}
- BUS:B<x>:SDLC:ENCoding?
- BUS:B<x>:SDLC:MODulo {8|128}
- BUS:B<x>:SDLC:MODulo?
- BUS:B<x>:SENT:CHANWidth {TWELVEtwelve|FOURTEENten|SIXTEENeight}
- BUS:B<x>:SENT:CHANWidth?
- BUS:B<x>:SENT:NIBBLECount {THREE|FOUR|SIX}
- BUS:B<x>:SENT:NIBBLECount?
- BUS:B<x>:SENT:NUMCHANnel {ONE|TWO}
- BUS:B<x>:SENT:NUMCHANnel?
- BUS:B<x>:SENT:PAUSEPULSe {NO|YES}
- BUS:B<x>:SENT:PAUSEPULSe?
- BUS:B<x>:SENT:POLARITY {INVerted|NORmal}
- BUS:B<x>:SENT:POLARITY?
- BUS:B<x>:SENT:SLOW {NOne|ENHANCED4|ENHANCED8|SHOrt}
- BUS:B<x>:SENT:SLOW?
- BUS:B<x>:SENT:SOUrce {S<x>_Ch<x>_D<x>|CH<x>|CH<x>_D<x>|Math<x>|REF<x>|REF<x>_D<x>}
- BUS:B<x>:SENT:SOUrce?
- BUS:B<x>:SENT:THRESHold <NR3>
- BUS:B<x>:SENT:THRESHold?
- BUS:B<x>:SENT:TICKTIME <NR3>
- BUS:B<x>:SENT:TICKTIME?
- BUS:B<x>:SENT:TICKTOLerance <NR3>
- BUS:B<x>:SENT:TICKTOLerance?
- BUS:B<x>:SMBUS:CLOCk:SOUrce {S<x>_Ch<x>|CH<x>|MATH<x>|REF<x>}
- BUS:B<x>:SMBUS:CLOCk:SOUrce?
- BUS:B<x>:SMBUS:CLOCk:THReshold <NR3>
- BUS:B<x>:SMBUS:CLOCk:THReshold?
- BUS:B<x>:SMBUS:DATA:SOUrce {S<x>_Ch<x>|CH<x>|MATH<x>|REF<x>}
- BUS:B<x>:SMBUS:DATA:SOUrce?
- BUS:B<x>:SMBUS:DATA:THReshold <NR3>
- BUS:B<x>:SMBUS:DATA:THReshold?
- BUS:B<x>:SMBUS:PEC:VALUe {TRUe|FALSe}
- BUS:B<x>:SMBUS:PEC:VALUe?
- BUS:B<x>:SPACEWIRe:BITRate <NR3>
- BUS:B<x>:SPACEWIRe:BITRate?
- BUS:B<x>:SPACEWIRe:DATa:SOUrce {S<x>_Ch<x>|CH<x>|MATH<x>|REF<x>}
- BUS:B<x>:SPACEWIRe:DATa:SOUrce?
- BUS:B<x>:SPACEWIRe:DATa:THReshold <NR3>
- BUS:B<x>:SPACEWIRe:DATa:THReshold?
- BUS:B<x>:SPACEWIRe:DECode:TYPe {STRObe|DATARate}
- BUS:B<x>:SPACEWIRe:DECode:TYPe?
- BUS:B<x>:SPACEWIRe:STRobe:SOUrce {S<x>_Ch<x>|CH<x>|MATH<x>|REF<x>}
- BUS:B<x>:SPACEWIRe:STRobe:SOUrce?
- BUS:B<x>:SPACEWIRe:STRobe:THReshold <NR3>
- BUS:B<x>:SPACEWIRe:STRobe:THReshold?
- BUS:B<x>:SPACEWIRe:SYNC {DATA|NULL|AUTO|CUSTom}
- BUS:B<x>:SPACEWIRe:SYNC:COUnt <NR1>
- BUS:B<x>:SPACEWIRe:SYNC:COUnt?
- BUS:B<x>:SPACEWIRe:SYNC:PATTern <NR3>
- BUS:B<x>:SPACEWIRe:SYNC:PATTern?
- BUS:B<x>:SPACEWIRe:SYNC:VALUe <NR3>
- BUS:B<x>:SPACEWIRe:SYNC:VALUe?
- BUS:B<x>:SPACEWIRe:SYNC?
- BUS:B<x>:SPI:BITOrder {LSB|MSB}
- BUS:B<x>:SPI:BITOrder?
- BUS:B<x>:SPI:CLOCk:POLarity {FALL|RISE}
- BUS:B<x>:SPI:CLOCk:POLarity?
- BUS:B<x>:SPI:CLOCk:SOUrce {S<x>_Ch<x>_D<x>|CH<x>|CH<x>_D<x>|MATH<x>|REF<x>|REF<x>_D<x>}
- BUS:B<x>:SPI:CLOCk:SOUrce?
- BUS:B<x>:SPI:CLOCk:THReshold <NR3>
- BUS:B<x>:SPI:CLOCk:THReshold?
- BUS:B<x>:SPI:DATa:POLarity {HIGH|LOW}
- BUS:B<x>:SPI:DATa:POLarity?
- BUS:B<x>:SPI:DATa:SIZe <NR1>
- BUS:B<x>:SPI:DATa:SIZe?
- BUS:B<x>:SPI:DATa:SOUrce {S<x>_Ch<x>_D<x>|CH<x>|CH<x>_D<x>|MATH<x>|REF<x>|REF<x>_D<x>}
- BUS:B<x>:SPI:DATa:SOUrce?
- BUS:B<x>:SPI:DATa:THReshold <NR3>
- BUS:B<x>:SPI:DATa:THReshold?
- BUS:B<x>:SPI:FRAMING {IDLE|SS}
- BUS:B<x>:SPI:FRAMING?
- BUS:B<x>:SPI:IDLETime <NR3>
- BUS:B<x>:SPI:IDLETime?
- BUS:B<x>:SPI:MISo:DATa:POLarity {HIGH|LOW}
- BUS:B<x>:SPI:MISo:DATa:POLarity?
- BUS:B<x>:SPI:MISo:INPut {S<x>_Ch<x>|CH<x>|MATH<x>|REF<x>}
- BUS:B<x>:SPI:MISo:INPut?
- BUS:B<x>:SPI:MISo:THReshold <NR3>
- BUS:B<x>:SPI:MISo:THReshold?
- BUS:B<x>:SPI:MOSi:DATa:POLarity {HIGH|LOW}
- BUS:B<x>:SPI:MOSi:DATa:POLarity?
- BUS:B<x>:SPI:MOSi:INPut {S<x>_Ch<x>|CH<x>|MATH<x>|REF<x>}
- BUS:B<x>:SPI:MOSi:INPut?
- BUS:B<x>:SPI:MOSi:THReshold <NR3>
- BUS:B<x>:SPI:MOSi:THReshold?
- BUS:B<x>:SPI:NUMBer:INputs {ONE|TWO}
- BUS:B<x>:SPI:NUMBer:INputs?
- BUS:B<x>:SPI:SELect:POLarity {LOW|HIGH}
- BUS:B<x>:SPI:SELect:POLarity?
- BUS:B<x>:SPI:SELect:SOUrce {S<x>_Ch<x>_D<x>|CH<x>|CH<x>_D<x>|MATH<x>|REF<x>|REF<x>_D<x>}
- BUS:B<x>:SPI:SELect:SOUrce?
- BUS:B<x>:SPI:SELect:THReshold <NR3>
- BUS:B<x>:SPI:SELect:THReshold?
- BUS:B<x>:SPMI:SCLk:SOUrce {CH<x>|CH<x>_Dx>|Math<x>|REF<x>|REF<x>_D<x>}
- BUS:B<x>:SPMI:SCLk:SOUrce?
- BUS:B<x>:SPMI:SCLk:THReshold <NR3>
- BUS:B<x>:SPMI:SCLk:THReshold?
- BUS:B<x>:SPMI:SDATa:SOUrce {CH<x>|CH<x>_Dx>|Math<x>|REF<x>|REF<x>_D<x>}
- BUS:B<x>:SPMI:SDATa:SOUrce?
- BUS:B<x>:SPMI:SDATa:THReshold <NR3>
- BUS:B<x>:SPMI:SDATa:THReshold?
- BUS:B<x>:SVID:ALERT:SOUrce {S<x>_Ch<x>|CH<x>|MATH<x>|REF<x>}
- BUS:B<x>:SVID:ALERT:SOUrce?
- BUS:B<x>:SVID:ALERT:THReshold <NR3>
- BUS:B<x>:SVID:ALERT:THReshold?
- BUS:B<x>:SVID:CLOCk:SOUrce {S<x>_Ch<x>|CH<x>|MATH<x>|REF<x>}
- BUS:B<x>:SVID:CLOCk:SOUrce?
- BUS:B<x>:SVID:CLOCk:THReshold <NR3>
- BUS:B<x>:SVID:CLOCk:THReshold?
- BUS:B<x>:SVID:DATA:SOUrce {S<x>_Ch<x>|CH<x>|MATH<x>|REF<x>}
- BUS:B<x>:SVID:DATA:SOUrce?
- BUS:B<x>:SVID:DATA:THReshold <NR3>
- BUS:B<x>:SVID:DATA:THReshold?
- BUS:B<x>:TYPe {ARINC429|AUDio|CAN|ETHernet|EUSB|FLEXRAY|I2C|I3C|LIN|MDIO|MIL1553B|PARallel|RS232C|SENT|SPI|SPMI|SVID|USB}
- BUS:B<x>:TYPe?
- BUS:B<x>:USB:BITRate {FULL|HIGH|LOW}
- BUS:B<x>:USB:BITRate?
- BUS:B<x>:USB:DATAMINUSTHRESHold <NR3>
- BUS:B<x>:USB:DATAMINUSTHRESHold?
- BUS:B<x>:USB:DATAPLUSTHRESHold <NR3>
- BUS:B<x>:USB:DATAPLUSTHRESHold?
- BUS:B<x>:USB:LOWTHRESHold <NR3>
- BUS:B<x>:USB:LOWTHRESHold?
- BUS:B<x>:USB:SIGNALTYpe {SINGLE|DIFF}
- BUS:B<x>:USB:SIGNALTYpe?
- BUS:B<x>:USB:SOUrce {S<x>_Ch<x>|CH<x>|MATH<x>|REF<x>}
- BUS:B<x>:USB:SOUrce:DMINus {S<x>_Ch<x>_D<x>|CH<x>|CH<x>_D<x>|MATH<x>|REF<x>|REF<x>_D<x>}
- BUS:B<x>:USB:SOUrce:DMINus?
- BUS:B<x>:USB:SOUrce:DPLUs {S<x>_Ch<x>_D<x>|CH<x>|CH<x>_D<x>|MATH<x>|REF<x>|REF<x>_D<x>}
- BUS:B<x>:USB:SOUrce:DPLUs?
- BUS:B<x>:USB:SOUrce?
- BUS:B<x>:USB:THRESHold <NR3>
- BUS:B<x>:USB:THRESHold?
- BUS:DELete <QString>
- BUS:LIST?

Bus ¶

Bases: SCPICmdRead

The BUS command tree.

Usage

Using the .query() method will send the BUS? query.
Using the .verify(value) method will send the BUS? query and raise an AssertionError if the returned value does not match value.

Properties

.addnew: The BUS:ADDNew command.
.b: The BUS:B<x> command tree.
.delete: The BUS:DELete command.
.list: The BUS:LIST command.

addnew `property` ¶

addnew: BusAddnew

Return the BUS:ADDNew command.

Description

This command adds the specified bus. This command creates/adds the bus but does not display it (turn it on). In order to enable bus decoding and see the bus display on screen, send the DISPLAY:WAVEVIEWX:BUS:BX:STATE ON command.

Usage

Using the .write(value) method will send the BUS:ADDNew value command.

SCPI Syntax

- BUS:ADDNew <QString>

Info

<QString> is a quoted string of the form ‘B’ where NR1 is ≥1.

b `property` ¶

b: dict[int, BusBItem]

Return the BUS:B<x> command tree.

Usage

Using the .query() method will send the BUS:B<x>? query.
Using the .verify(value) method will send the BUS:B<x>? query and raise an AssertionError if the returned value does not match value.

Info

B<x> is the number of the bus.

Sub-properties

.arinc429a: The BUS:B<x>:ARINC429A command tree.
.audio: The BUS:B<x>:AUDio command tree.
.autoethernet: The BUS:B<x>:AUTOETHERnet command tree.
.can: The BUS:B<x>:CAN command tree.
.cphy: The BUS:B<x>:CPHY command tree.
.cxpi: The BUS:B<x>:CXPI command tree.
.display: The BUS:B<x>:DISplay command tree.
.dphy: The BUS:B<x>:DPHY command tree.
.espi: The BUS:B<x>:ESPI command tree.
.ethercat: The BUS:B<x>:ETHERCAT command tree.
.ethernet: The BUS:B<x>:ETHERnet command tree.
.eusb: The BUS:B<x>:EUSB command tree.
.flexray: The BUS:B<x>:FLEXray command tree.
.i2c: The BUS:B<x>:I2C command tree.
.i3c: The BUS:B<x>:I3C command tree.
.label: The BUS:B<x>:LABel command tree.
.lin: The BUS:B<x>:LIN command tree.
.manchester: The BUS:B<x>:MANChester command tree.
.mdio: The BUS:B<x>:MDIO command tree.
.mil1553b: The BUS:B<x>:MIL1553B command tree.
.nrz: The BUS:B<x>:NRZ command tree.
.onewire: The BUS:B<x>:ONEWIRe command tree.
.parallel: The BUS:B<x>:PARallel command tree.
.psifive: The BUS:B<x>:PSIFIVe command tree.
.rs232c: The BUS:B<x>:RS232C command tree.
.s8b10b: The BUS:B<x>:S8B10B command tree.
.sdlc: The BUS:B<x>:SDLC command tree.
.sent: The BUS:B<x>:SENT command tree.
.smbus: The BUS:B<x>:SMBUS command tree.
.spacewire: The BUS:B<x>:SPACEWIRe command tree.
.spi: The BUS:B<x>:SPI command tree.
.spmi: The BUS:B<x>:SPMI command tree.
.svid: The BUS:B<x>:SVID command tree.
.type: The BUS:B<x>:TYPe command.
.usb: The BUS:B<x>:USB command tree.

delete `property` ¶

delete: BusDelete

Return the BUS:DELete command.

Description

This command deletes the specified bus.

Usage

Using the .write(value) method will send the BUS:DELete value command.

SCPI Syntax

- BUS:DELete <QString>

Info

<QString> specifies the bus to delete and is of the form ‘B‘, where is ≥1.

list `property` ¶

list: BusList

Return the BUS:LIST command.

Description

This query returns a comma separated list of all currently defined buses.

Usage

Using the .query() method will send the BUS:LIST? query.
Using the .verify(value) method will send the BUS:LIST? query and raise an AssertionError if the returned value does not match value.

SCPI Syntax

- BUS:LIST?

BusAddnew ¶

Bases: SCPICmdWrite

The BUS:ADDNew command.

Description

This command adds the specified bus. This command creates/adds the bus but does not display it (turn it on). In order to enable bus decoding and see the bus display on screen, send the DISPLAY:WAVEVIEWX:BUS:BX:STATE ON command.

Usage

Using the .write(value) method will send the BUS:ADDNew value command.

SCPI Syntax

- BUS:ADDNew <QString>

Info

<QString> is a quoted string of the form ‘B’ where NR1 is ≥1.

BusBItem ¶

Bases: ValidatedDynamicNumberCmd, SCPICmdRead

The BUS:B<x> command tree.

Usage

Using the .query() method will send the BUS:B<x>? query.
Using the .verify(value) method will send the BUS:B<x>? query and raise an AssertionError if the returned value does not match value.

Info

B<x> is the number of the bus.

Properties

.arinc429a: The BUS:B<x>:ARINC429A command tree.
.audio: The BUS:B<x>:AUDio command tree.
.autoethernet: The BUS:B<x>:AUTOETHERnet command tree.
.can: The BUS:B<x>:CAN command tree.
.cphy: The BUS:B<x>:CPHY command tree.
.cxpi: The BUS:B<x>:CXPI command tree.
.display: The BUS:B<x>:DISplay command tree.
.dphy: The BUS:B<x>:DPHY command tree.
.espi: The BUS:B<x>:ESPI command tree.
.ethercat: The BUS:B<x>:ETHERCAT command tree.
.ethernet: The BUS:B<x>:ETHERnet command tree.
.eusb: The BUS:B<x>:EUSB command tree.
.flexray: The BUS:B<x>:FLEXray command tree.
.i2c: The BUS:B<x>:I2C command tree.
.i3c: The BUS:B<x>:I3C command tree.
.label: The BUS:B<x>:LABel command tree.
.lin: The BUS:B<x>:LIN command tree.
.manchester: The BUS:B<x>:MANChester command tree.
.mdio: The BUS:B<x>:MDIO command tree.
.mil1553b: The BUS:B<x>:MIL1553B command tree.
.nrz: The BUS:B<x>:NRZ command tree.
.onewire: The BUS:B<x>:ONEWIRe command tree.
.parallel: The BUS:B<x>:PARallel command tree.
.psifive: The BUS:B<x>:PSIFIVe command tree.
.rs232c: The BUS:B<x>:RS232C command tree.
.s8b10b: The BUS:B<x>:S8B10B command tree.
.sdlc: The BUS:B<x>:SDLC command tree.
.sent: The BUS:B<x>:SENT command tree.
.smbus: The BUS:B<x>:SMBUS command tree.
.spacewire: The BUS:B<x>:SPACEWIRe command tree.
.spi: The BUS:B<x>:SPI command tree.
.spmi: The BUS:B<x>:SPMI command tree.
.svid: The BUS:B<x>:SVID command tree.
.type: The BUS:B<x>:TYPe command.
.usb: The BUS:B<x>:USB command tree.

arinc429a `property` ¶

arinc429a: BusBItemArinc429a

Return the BUS:B<x>:ARINC429A command tree.

Usage

Using the .query() method will send the BUS:B<x>:ARINC429A? query.
Using the .verify(value) method will send the BUS:B<x>:ARINC429A? query and raise an AssertionError if the returned value does not match value.

Info

B<x> is the number of the bus.

Sub-properties

.bitrate: The BUS:B<x>:ARINC429A:BITRate command.
.dataformat: The BUS:B<x>:ARINC429A:DATAFORmat command.
.polarity: The BUS:B<x>:ARINC429A:POLARITY command.
.source: The BUS:B<x>:ARINC429A:SOUrce command.
.threshold: The BUS:B<x>:ARINC429A:THRESHold command.

audio `property` ¶

audio: BusBItemAudio

Return the BUS:B<x>:AUDio command tree.

Usage

Using the .query() method will send the BUS:B<x>:AUDio? query.
Using the .verify(value) method will send the BUS:B<x>:AUDio? query and raise an AssertionError if the returned value does not match value.

Info

B<x> is the number of the bus.

Sub-properties

.bitdelay: The BUS:B<x>:AUDio:BITDelay command.
.bitorder: The BUS:B<x>:AUDio:BITOrder command.
.clock: The BUS:B<x>:AUDio:CLOCk command tree.
.data: The BUS:B<x>:AUDio:DATa command tree.
.frame: The BUS:B<x>:AUDio:FRAME command tree.
.type: The BUS:B<x>:AUDio:TYPe command.
.wordsel: The BUS:B<x>:AUDio:WORDSel command tree.

autoethernet `property` ¶

autoethernet: BusBItemAutoethernet

Return the BUS:B<x>:AUTOETHERnet command tree.

Usage

Using the .query() method will send the BUS:B<x>:AUTOETHERnet? query.
Using the .verify(value) method will send the BUS:B<x>:AUTOETHERnet? query and raise an AssertionError if the returned value does not match value.

Info

B<x> is the Bus number.

Sub-properties

.dataminusthreshold: The BUS:B<x>:AUTOETHERnet:DATAMINUSTHRESHOLD command.
.dataplusthreshold: The BUS:B<x>:AUTOETHERnet:DATAPLUSTHRESHold command.
.lowdataminus: The BUS:B<x>:AUTOETHERnet:LOWDATAMINus command.
.lowdataplus: The BUS:B<x>:AUTOETHERnet:LOWDATAPLUS command.
.lowthreshold: The BUS:B<x>:AUTOETHERnet:LOWTHRESHold command.
.signaltype: The BUS:B<x>:AUTOETHERnet:SIGNALTYpe command.
.source: The BUS:B<x>:AUTOETHERnet:SOUrce command.
.threshold: The BUS:B<x>:AUTOETHERnet:THRESHold command.
.type: The BUS:B<x>:AUTOETHERnet:TYPe command.

can `property` ¶

can: BusBItemCan

Return the BUS:B<x>:CAN command tree.

Usage

Using the .query() method will send the BUS:B<x>:CAN? query.
Using the .verify(value) method will send the BUS:B<x>:CAN? query and raise an AssertionError if the returned value does not match value.

Info

B<x> is the number of the bus.

Sub-properties

.bitrate: The BUS:B<x>:CAN:BITRate command.
.fd: The BUS:B<x>:CAN:FD command tree.
.samplepoint: The BUS:B<x>:CAN:SAMPLEpoint command.
.signal: The BUS:B<x>:CAN:SIGNal command.
.source: The BUS:B<x>:CAN:SOUrce command.
.standard: The BUS:B<x>:CAN:STANDard command.
.threshold: The BUS:B<x>:CAN:THReshold command.

cphy `property` ¶

cphy: BusBItemCphy

Return the BUS:B<x>:CPHY command tree.

Usage

Using the .query() method will send the BUS:B<x>:CPHY? query.
Using the .verify(value) method will send the BUS:B<x>:CPHY? query and raise an AssertionError if the returned value does not match value.

Info

B<x> is the number of the bus.

Sub-properties

.a: The BUS:B<x>:CPHY:A command tree.
.ab: The BUS:B<x>:CPHY:AB command tree.
.agnd: The BUS:B<x>:CPHY:AGND command tree.
.b: The BUS:B<x>:CPHY:B command tree.
.bc: The BUS:B<x>:CPHY:BC command tree.
.bitrate: The BUS:B<x>:CPHY:BITRate command.
.c: The BUS:B<x>:CPHY:C command tree.
.ca: The BUS:B<x>:CPHY:CA command tree.
.cgnd: The BUS:B<x>:CPHY:CGND command tree.
.lp: The BUS:B<x>:CPHY:LP command tree.
.signaltype: The BUS:B<x>:CPHY:SIGNALTYpe command.
.subtype: The BUS:B<x>:CPHY:SUBTYPe command.

cxpi `property` ¶

cxpi: BusBItemCxpi

Return the BUS:B<x>:CXPI command tree.

Usage

Using the .query() method will send the BUS:B<x>:CXPI? query.
Using the .verify(value) method will send the BUS:B<x>:CXPI? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.bitrate: The BUS:B<x>:CXPI:BITRate command.
.rec: The BUS:B<x>:CXPI:REC command tree.
.source: The BUS:B<x>:CXPI:SOUrce command.

display `property` ¶

display: BusBItemDisplay

Return the BUS:B<x>:DISplay command tree.

Usage

Using the .query() method will send the BUS:B<x>:DISplay? query.
Using the .verify(value) method will send the BUS:B<x>:DISplay? query and raise an AssertionError if the returned value does not match value.

Info

B<x> is the number of the bus.

Sub-properties

.format: The BUS:B<x>:DISplay:FORMat command.
.layout: The BUS:B<x>:DISplay:LAYout command.

dphy `property` ¶

dphy: BusBItemDphy

Return the BUS:B<x>:DPHY command tree.

Usage

Using the .query() method will send the BUS:B<x>:DPHY? query.
Using the .verify(value) method will send the BUS:B<x>:DPHY? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.clock: The BUS:B<x>:DPHY:CLOCk command tree.
.dminus: The BUS:B<x>:DPHY:DMINus command tree.
.dplus: The BUS:B<x>:DPHY:DPlus command tree.
.lp: The BUS:B<x>:DPHY:LP command tree.
.protocol: The BUS:B<x>:DPHY:PROTocol command tree.
.signal: The BUS:B<x>:DPHY:SIGNal command tree.

espi `property` ¶

espi: BusBItemEspi

Return the BUS:B<x>:ESPI command tree.

Usage

Using the .query() method will send the BUS:B<x>:ESPI? query.
Using the .verify(value) method will send the BUS:B<x>:ESPI? query and raise an AssertionError if the returned value does not match value.

Info

B<x> is the Bus number.

Sub-properties

.alertview: The BUS:B<x>:ESPI:ALERTVIEW command.
.alert: The BUS:B<x>:ESPI:ALERt command tree.
.chipselect: The BUS:B<x>:ESPI:CHIPSELect command tree.
.clock: The BUS:B<x>:ESPI:CLOCk command tree.
.dataone: The BUS:B<x>:ESPI:DATAONE command tree.
.datatwo: The BUS:B<x>:ESPI:DATATWO command tree.
.iomode: The BUS:B<x>:ESPI:IOMODe command.

ethercat `property` ¶

ethercat: BusBItemEthercat

Return the BUS:B<x>:ETHERCAT command tree.

Usage

Using the .query() method will send the BUS:B<x>:ETHERCAT? query.
Using the .verify(value) method will send the BUS:B<x>:ETHERCAT? query and raise an AssertionError if the returned value does not match value.

Info

B<x> is the number of the bus.

Sub-properties

.dataminusthreshold: The BUS:B<x>:ETHERCAT:DATAMINUSTHRESHold command.
.dataplusthreshold: The BUS:B<x>:ETHERCAT:DATAPLUSTHRESHold command.
.signaltype: The BUS:B<x>:ETHERCAT:SIGNALTYpe command.
.source: The BUS:B<x>:ETHERCAT:SOUrce command tree.
.threshold: The BUS:B<x>:ETHERCAT:THRESHold command.

ethernet `property` ¶

ethernet: BusBItemEthernet

Return the BUS:B<x>:ETHERnet command tree.

Usage

Using the .query() method will send the BUS:B<x>:ETHERnet? query.
Using the .verify(value) method will send the BUS:B<x>:ETHERnet? query and raise an AssertionError if the returned value does not match value.

Info

B<x> is the number of the bus.

Sub-properties

.dataminusthreshold: The BUS:B<x>:ETHERnet:DATAMINUSTHRESHold command.
.dataplusthreshold: The BUS:B<x>:ETHERnet:DATAPLUSTHRESHold command.
.ipvfour: The BUS:B<x>:ETHERnet:IPVFOUR command.
.lowthreshold: The BUS:B<x>:ETHERnet:LOWTHRESHold command.
.qtagging: The BUS:B<x>:ETHERnet:QTAGGING command.
.signaltype: The BUS:B<x>:ETHERnet:SIGNALTYpe command.
.source: The BUS:B<x>:ETHERnet:SOUrce command.
.threshold: The BUS:B<x>:ETHERnet:THRESHold command.
.type: The BUS:B<x>:ETHERnet:TYPe command.

eusb `property` ¶

eusb: BusBItemEusb

Return the BUS:B<x>:EUSB command tree.

Usage

Using the .query() method will send the BUS:B<x>:EUSB? query.
Using the .verify(value) method will send the BUS:B<x>:EUSB? query and raise an AssertionError if the returned value does not match value.

Info

B<x> is the number of the bus.

Sub-properties

.bitrate: The BUS:B<x>:EUSB:BITRate command.
.dataminus: The BUS:B<x>:EUSB:DATAMINUS command tree.
.dataminusthreshold: The BUS:B<x>:EUSB:DATAMINUSTHRESHold command.
.dataplus: The BUS:B<x>:EUSB:DATAPLUS command tree.
.dataplusthreshold: The BUS:B<x>:EUSB:DATAPLUSTHRESHold command.
.lowthreshold: The BUS:B<x>:EUSB:LOWTHRESHold command.
.operating: The BUS:B<x>:EUSB:OPERating command tree.
.signaltype: The BUS:B<x>:EUSB:SIGNALTYpe command.
.source: The BUS:B<x>:EUSB:SOUrce command tree.
.threshold: The BUS:B<x>:EUSB:THRESHold command.

flexray `property` ¶

flexray: BusBItemFlexray

Return the BUS:B<x>:FLEXray command tree.

Usage

Using the .query() method will send the BUS:B<x>:FLEXray? query.
Using the .verify(value) method will send the BUS:B<x>:FLEXray? query and raise an AssertionError if the returned value does not match value.

Info

B<x> is the number of the bus.

Sub-properties

.bitrate: The BUS:B<x>:FLEXray:BITRate command.
.channel: The BUS:B<x>:FLEXray:CHannel command.
.lowthreshold: The BUS:B<x>:FLEXray:LOWTHRESHold command.
.signal: The BUS:B<x>:FLEXray:SIGnal command.
.source: The BUS:B<x>:FLEXray:SOUrce command.
.threshold: The BUS:B<x>:FLEXray:THRESHold command.
.txrxthreshold: The BUS:B<x>:FLEXray:TXRXTHRESHold command.

i2c `property` ¶

i2c: BusBItemI2c

Return the BUS:B<x>:I2C command tree.

Usage

Using the .query() method will send the BUS:B<x>:I2C? query.
Using the .verify(value) method will send the BUS:B<x>:I2C? query and raise an AssertionError if the returned value does not match value.

Info

B<x> is the number of the bus.

Sub-properties

.clock: The BUS:B<x>:I2C:CLOCk command tree.
.data: The BUS:B<x>:I2C:DATa command tree.
.rwinaddr: The BUS:B<x>:I2C:RWINADDR command.

i3c `property` ¶

i3c: BusBItemI3c

Return the BUS:B<x>:I3C command tree.

Usage

Using the .query() method will send the BUS:B<x>:I3C? query.
Using the .verify(value) method will send the BUS:B<x>:I3C? query and raise an AssertionError if the returned value does not match value.

Info

B<x> specifies the bus number.

Sub-properties

.clock: The BUS:B<x>:I3C:CLOCk command tree.
.data: The BUS:B<x>:I3C:DATa command tree.

label `property` ¶

label: BusBItemLabel

Return the BUS:B<x>:LABel command tree.

Usage

Using the .query() method will send the BUS:B<x>:LABel? query.
Using the .verify(value) method will send the BUS:B<x>:LABel? query and raise an AssertionError if the returned value does not match value.

Info

B<x> is the number of the bus.

Sub-properties

.color: The BUS:B<x>:LABel:COLor command.
.font: The BUS:B<x>:LABel:FONT command tree.
.xpos: The BUS:B<x>:LABel:XPOS command.
.ypos: The BUS:B<x>:LABel:YPOS command.
.name: The BUS:B<x>:LABel:name command.

lin `property` ¶

lin: BusBItemLin

Return the BUS:B<x>:LIN command tree.

Usage

Using the .query() method will send the BUS:B<x>:LIN? query.
Using the .verify(value) method will send the BUS:B<x>:LIN? query and raise an AssertionError if the returned value does not match value.

Info

B<x> is the number of the bus.

Sub-properties

.bitrate: The BUS:B<x>:LIN:BITRate command.
.idformat: The BUS:B<x>:LIN:IDFORmat command.
.polarity: The BUS:B<x>:LIN:POLarity command.
.samplepoint: The BUS:B<x>:LIN:SAMPLEpoint command.
.source: The BUS:B<x>:LIN:SOUrce command.
.standard: The BUS:B<x>:LIN:STANDard command.

manchester `property` ¶

manchester: BusBItemManchester

Return the BUS:B<x>:MANChester command tree.

Usage

Using the .query() method will send the BUS:B<x>:MANChester? query.
Using the .verify(value) method will send the BUS:B<x>:MANChester? query and raise an AssertionError if the returned value does not match value.

Info

B<x> is the number of the bus.

Sub-properties

.bitorder: The BUS:B<x>:MANChester:BITORDer command.
.bitrate: The BUS:B<x>:MANChester:BITRate command.
.displaymode: The BUS:B<x>:MANChester:DISplaymode command.
.header: The BUS:B<x>:MANChester:HEADer command tree.
.idle: The BUS:B<x>:MANChester:IDLE command tree.
.source: The BUS:B<x>:MANChester:SOUrce command.
.start: The BUS:B<x>:MANChester:START command tree.
.sync: The BUS:B<x>:MANChester:SYNC command tree.
.threshold: The BUS:B<x>:MANChester:THReshold command.
.tolerance: The BUS:B<x>:MANChester:TOLerance command.
.transtion: The BUS:B<x>:MANChester:TRANstion command tree.
.trailer: The BUS:B<x>:MANChester:TRAiler command tree.
.word: The BUS:B<x>:MANChester:WORD command tree.
.wordsize: The BUS:B<x>:MANChester:WORDSIZe command.
.parity: The BUS:B<x>:MANChester:parity command.

mdio `property` ¶

mdio: BusBItemMdio

Return the BUS:B<x>:MDIO command tree.

Usage

Using the .query() method will send the BUS:B<x>:MDIO? query.
Using the .verify(value) method will send the BUS:B<x>:MDIO? query and raise an AssertionError if the returned value does not match value.

Info

B<x> is the number of the bus.

Sub-properties

.clock: The BUS:B<x>:MDIO:CLOCk command tree.
.data: The BUS:B<x>:MDIO:DATA command tree.

mil1553b `property` ¶

mil1553b: BusBItemMil1553b

Return the BUS:B<x>:MIL1553B command tree.

Usage

Using the .query() method will send the BUS:B<x>:MIL1553B? query.
Using the .verify(value) method will send the BUS:B<x>:MIL1553B? query and raise an AssertionError if the returned value does not match value.

Info

B<x> is the number of the bus.

Sub-properties

.lowthreshold: The BUS:B<x>:MIL1553B:LOWTHRESHold command.
.polarity: The BUS:B<x>:MIL1553B:POLarity command.
.responsetime: The BUS:B<x>:MIL1553B:RESPonsetime command tree.
.source: The BUS:B<x>:MIL1553B:SOUrce command.
.threshold: The BUS:B<x>:MIL1553B:THRESHold command.

nrz `property` ¶

nrz: BusBItemNrz

Return the BUS:B<x>:NRZ command tree.

Usage

Using the .query() method will send the BUS:B<x>:NRZ? query.
Using the .verify(value) method will send the BUS:B<x>:NRZ? query and raise an AssertionError if the returned value does not match value.

Info

B<x> is the number of the bus.

Sub-properties

.bitorder: The BUS:B<x>:NRZ:BITOrder command.
.bitrate: The BUS:B<x>:NRZ:BITRate command.
.polarity: The BUS:B<x>:NRZ:POLarity command.
.source: The BUS:B<x>:NRZ:SOUrce command.
.spmi: The BUS:B<x>:NRZ:SPMI command tree.
.threshold: The BUS:B<x>:NRZ:THReshold command.

onewire `property` ¶

onewire: BusBItemOnewire

Return the BUS:B<x>:ONEWIRe command tree.

Usage

Using the .query() method will send the BUS:B<x>:ONEWIRe? query.
Using the .verify(value) method will send the BUS:B<x>:ONEWIRe? query and raise an AssertionError if the returned value does not match value.

Info

B<x> is the number of the bus.

Sub-properties

.data: The BUS:B<x>:ONEWIRe:DATA command tree.
.mode: The BUS:B<x>:ONEWIRe:MODe command.

parallel `property` ¶

parallel: BusBItemParallel

Return the BUS:B<x>:PARallel command tree.

Usage

Using the .query() method will send the BUS:B<x>:PARallel? query.
Using the .verify(value) method will send the BUS:B<x>:PARallel? query and raise an AssertionError if the returned value does not match value.

Info

B<x> is the number of the bus.

Sub-properties

.allthresholds: The BUS:B<x>:PARallel:ALLTHResholds command.
.bitsource: The BUS:B<x>:PARallel:BIT<n>SOUrce command.
.clock: The BUS:B<x>:PARallel:CLOCk command tree.
.clocksource: The BUS:B<x>:PARallel:CLOCkSOUrce command.

psifive `property` ¶

psifive: BusBItemPsifive

Return the BUS:B<x>:PSIFIVe command tree.

Usage

Using the .query() method will send the BUS:B<x>:PSIFIVe? query.
Using the .verify(value) method will send the BUS:B<x>:PSIFIVe? query and raise an AssertionError if the returned value does not match value.

Info

B<x> is the number of the bus.

Sub-properties

.bitperiod: The BUS:B<x>:PSIFIVe:BITPERiod command.
.bitrate: The BUS:B<x>:PSIFIVe:BITRate command.
.comm: The BUS:B<x>:PSIFIVe:COMM command tree.
.dataa: The BUS:B<x>:PSIFIVe:DATAA command.
.datab: The BUS:B<x>:PSIFIVe:DATAB command.
.dataformat: The BUS:B<x>:PSIFIVe:DATAFORMat command.
.ecusource: The BUS:B<x>:PSIFIVe:ECUSOURce command.
.framecontrol: The BUS:B<x>:PSIFIVe:FRAMECONTrol command.
.messaging: The BUS:B<x>:PSIFIVe:MESSaging command.
.source: The BUS:B<x>:PSIFIVe:SOUrce command.
.status: The BUS:B<x>:PSIFIVe:STATus command.
.syncmode: The BUS:B<x>:PSIFIVe:SYNCMODe command.
.syncthreshold: The BUS:B<x>:PSIFIVe:SYNCTHRESHold command.
.threshold: The BUS:B<x>:PSIFIVe:THRESHold command.

rs232c `property` ¶

rs232c: BusBItemRs232c

Return the BUS:B<x>:RS232C command tree.

Usage

Using the .query() method will send the BUS:B<x>:RS232C? query.
Using the .verify(value) method will send the BUS:B<x>:RS232C? query and raise an AssertionError if the returned value does not match value.

Info

B<x> is the number of the bus.

Sub-properties

.bitrate: The BUS:B<x>:RS232C:BITRate command.
.databits: The BUS:B<x>:RS232C:DATABits command.
.delimiter: The BUS:B<x>:RS232C:DELIMiter command.
.displaymode: The BUS:B<x>:RS232C:DISplaymode command.
.parity: The BUS:B<x>:RS232C:PARity command.
.polarity: The BUS:B<x>:RS232C:POLarity command.
.source: The BUS:B<x>:RS232C:SOUrce command.

s8b10b `property` ¶

s8b10b: BusBItemS8b10b

Return the BUS:B<x>:S8B10B command tree.

Usage

Using the .query() method will send the BUS:B<x>:S8B10B? query.
Using the .verify(value) method will send the BUS:B<x>:S8B10B? query and raise an AssertionError if the returned value does not match value.

Info

B<x> is the number of the bus.

Sub-properties

.bitrate: The BUS:B<x>:S8B10B:BITRate command.
.source: The BUS:B<x>:S8B10B:SOUrce command.
.threshold: The BUS:B<x>:S8B10B:THReshold command.

sdlc `property` ¶

sdlc: BusBItemSdlc

Return the BUS:B<x>:SDLC command tree.

Usage

Using the .query() method will send the BUS:B<x>:SDLC? query.
Using the .verify(value) method will send the BUS:B<x>:SDLC? query and raise an AssertionError if the returned value does not match value.

Info

B<x> is the number of the bus.

Sub-properties

.bitrate: The BUS:B<x>:SDLC:BITRate command.
.data: The BUS:B<x>:SDLC:DATA command tree.
.encoding: The BUS:B<x>:SDLC:ENCoding command.
.modulo: The BUS:B<x>:SDLC:MODulo command.

sent `property` ¶

sent: BusBItemSent

Return the BUS:B<x>:SENT command tree.

Usage

Using the .query() method will send the BUS:B<x>:SENT? query.
Using the .verify(value) method will send the BUS:B<x>:SENT? query and raise an AssertionError if the returned value does not match value.

Info

B<x> is the number of the bus waveform.

Sub-properties

.chanwidth: The BUS:B<x>:SENT:CHANWidth command.
.nibblecount: The BUS:B<x>:SENT:NIBBLECount command.
.numchannel: The BUS:B<x>:SENT:NUMCHANnel command.
.pausepulse: The BUS:B<x>:SENT:PAUSEPULSe command.
.polarity: The BUS:B<x>:SENT:POLARITY command.
.slow: The BUS:B<x>:SENT:SLOW command.
.source: The BUS:B<x>:SENT:SOUrce command.
.threshold: The BUS:B<x>:SENT:THRESHold command.
.ticktime: The BUS:B<x>:SENT:TICKTIME command.
.ticktolerance: The BUS:B<x>:SENT:TICKTOLerance command.

smbus `property` ¶

smbus: BusBItemSmbus

Return the BUS:B<x>:SMBUS command tree.

Usage

Using the .query() method will send the BUS:B<x>:SMBUS? query.
Using the .verify(value) method will send the BUS:B<x>:SMBUS? query and raise an AssertionError if the returned value does not match value.

Info

B<x> is the bus number.

Sub-properties

.clock: The BUS:B<x>:SMBUS:CLOCk command tree.
.data: The BUS:B<x>:SMBUS:DATA command tree.
.pec: The BUS:B<x>:SMBUS:PEC command tree.

spacewire `property` ¶

spacewire: BusBItemSpacewire

Return the BUS:B<x>:SPACEWIRe command tree.

Usage

Using the .query() method will send the BUS:B<x>:SPACEWIRe? query.
Using the .verify(value) method will send the BUS:B<x>:SPACEWIRe? query and raise an AssertionError if the returned value does not match value.

Info

B<x> is the bus number.

Sub-properties

.bitrate: The BUS:B<x>:SPACEWIRe:BITRate command.
.data: The BUS:B<x>:SPACEWIRe:DATa command tree.
.decode: The BUS:B<x>:SPACEWIRe:DECode command tree.
.strobe: The BUS:B<x>:SPACEWIRe:STRobe command tree.
.sync: The BUS:B<x>:SPACEWIRe:SYNC command.

spi `property` ¶

spi: BusBItemSpi

Return the BUS:B<x>:SPI command tree.

Usage

Using the .query() method will send the BUS:B<x>:SPI? query.
Using the .verify(value) method will send the BUS:B<x>:SPI? query and raise an AssertionError if the returned value does not match value.

Info

B<x> is the number of the bus waveform.

Sub-properties

.bitorder: The BUS:B<x>:SPI:BITOrder command.
.clock: The BUS:B<x>:SPI:CLOCk command tree.
.data: The BUS:B<x>:SPI:DATa command tree.
.framing: The BUS:B<x>:SPI:FRAMING command.
.idletime: The BUS:B<x>:SPI:IDLETime command.
.miso: The BUS:B<x>:SPI:MISo command tree.
.mosi: The BUS:B<x>:SPI:MOSi command tree.
.number: The BUS:B<x>:SPI:NUMBer command tree.
.select: The BUS:B<x>:SPI:SELect command tree.

spmi `property` ¶

spmi: BusBItemSpmi

Return the BUS:B<x>:SPMI command tree.

Usage

Using the .query() method will send the BUS:B<x>:SPMI? query.
Using the .verify(value) method will send the BUS:B<x>:SPMI? query and raise an AssertionError if the returned value does not match value.

Info

B<x> is the number of the bus waveform.

Sub-properties

.sclk: The BUS:B<x>:SPMI:SCLk command tree.
.sdata: The BUS:B<x>:SPMI:SDATa command tree.

svid `property` ¶

svid: BusBItemSvid

Return the BUS:B<x>:SVID command tree.

Usage

Using the .query() method will send the BUS:B<x>:SVID? query.
Using the .verify(value) method will send the BUS:B<x>:SVID? query and raise an AssertionError if the returned value does not match value.

Info

B<x> is the number of the bus waveform.

Sub-properties

.alert: The BUS:B<x>:SVID:ALERT command tree.
.clock: The BUS:B<x>:SVID:CLOCk command tree.
.data: The BUS:B<x>:SVID:DATA command tree.

type `property` ¶

type: BusBItemType

Return the BUS:B<x>:TYPe command.

Description

This command sets or queries the bus type or standard for the specified bus. The bus is specified by x. Arguments for a bus type are only available then the required serial bus option is installed.

Usage

Using the .query() method will send the BUS:B<x>:TYPe? query.
Using the .verify(value) method will send the BUS:B<x>:TYPe? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:TYPe value command.

SCPI Syntax

- BUS:B<x>:TYPe {ARINC429|AUDio|CAN|ETHernet|EUSB|FLEXRAY|I2C|I3C|LIN|MDIO|MIL1553B|PARallel|RS232C|SENT|SPI|SPMI|SVID|USB}
- BUS:B<x>:TYPe?

Info

B<x> is the number of the bus waveform.
ARINC429 specifies the ARINC 429 avionics serial bus.
AUDio specifies an audio bus.
CAN specifies a Controller Area Network bus.
ETHernet specifies the Ethernet bus.
EUSB specifies a eUSB bus. Requires option SR-EUSB2.
FLEXRAY specifies a FlexRay bus.
I2C specifies the Inter-IC bus.
I3C specifies the MIPI Improved Inter Integrated Circuit (I3C) bus.
LIN specifies a Local Interconnect Network bus.
MDIO specifies a MDIO bus.
MIL1553B specifies the MIL-STD-1553 avionics serial bus.
PARallel specifies a parallel bus.
RS232C specifies the RS-232 Serial bus.
SENT specifies the Single Edge Nibble Transmission (SENT) automotive serial bus.
SPI specifies the Serial Peripheral Interface bus.
SPMI Specifies a System Power Management Interface bus.
SVID Specifies a Serial VID bus.
USB specifies the Universal Serial bus.

usb `property` ¶

usb: BusBItemUsb

Return the BUS:B<x>:USB command tree.

Usage

Using the .query() method will send the BUS:B<x>:USB? query.
Using the .verify(value) method will send the BUS:B<x>:USB? query and raise an AssertionError if the returned value does not match value.

Info

B<x> is the number of the bus waveform.

Sub-properties

.bitrate: The BUS:B<x>:USB:BITRate command.
.dataminusthreshold: The BUS:B<x>:USB:DATAMINUSTHRESHold command.
.dataplusthreshold: The BUS:B<x>:USB:DATAPLUSTHRESHold command.
.lowthreshold: The BUS:B<x>:USB:LOWTHRESHold command.
.signaltype: The BUS:B<x>:USB:SIGNALTYpe command.
.source: The BUS:B<x>:USB:SOUrce command.
.threshold: The BUS:B<x>:USB:THRESHold command.

BusBItemArinc429a ¶

Bases: SCPICmdRead

The BUS:B<x>:ARINC429A command tree.

Usage

Using the .query() method will send the BUS:B<x>:ARINC429A? query.
Using the .verify(value) method will send the BUS:B<x>:ARINC429A? query and raise an AssertionError if the returned value does not match value.

Info

B<x> is the number of the bus.

Properties

.bitrate: The BUS:B<x>:ARINC429A:BITRate command.
.dataformat: The BUS:B<x>:ARINC429A:DATAFORmat command.
.polarity: The BUS:B<x>:ARINC429A:POLARITY command.
.source: The BUS:B<x>:ARINC429A:SOUrce command.
.threshold: The BUS:B<x>:ARINC429A:THRESHold command.

bitrate `property` ¶

bitrate: BusBItemArinc429aBitrate

Return the BUS:B<x>:ARINC429A:BITRate command.

Description

This command sets or queries the ARINC429 bit rate for the specified bus. The bus number is specified by x. If you select Custom, use BUS:B<x>:ARINC429A:BITRate:CUSTom to set the bit rate.

Usage

Using the .query() method will send the BUS:B<x>:ARINC429A:BITRate? query.
Using the .verify(value) method will send the BUS:B<x>:ARINC429A:BITRate? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:ARINC429A:BITRate value command.

SCPI Syntax

- BUS:B<x>:ARINC429A:BITRate {LOW|HI|CUSTom}
- BUS:B<x>:ARINC429A:BITRate?

Info

B<x> is the number of the bus.
LOW sets the bit rate to handle low speed signals.
HI sets the bit rate to handle high speed signals.
CUSTom uses the custom bit rate set by BUS:B<x>:ARINC429A:BITRate:CUSTom.

Sub-properties

.custom: The BUS:B<x>:ARINC429A:BITRate:CUSTom command.

dataformat `property` ¶

dataformat: BusBItemArinc429aDataformat

Return the BUS:B<x>:ARINC429A:DATAFORmat command.

Description

This command sets or queries the format of the DATA field for the specified ARINC429 bus. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:ARINC429A:DATAFORmat? query.
Using the .verify(value) method will send the BUS:B<x>:ARINC429A:DATAFORmat? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:ARINC429A:DATAFORmat value command.

SCPI Syntax

- BUS:B<x>:ARINC429A:DATAFORmat {DATA|SDIDATA|SDIDATASSM}
- BUS:B<x>:ARINC429A:DATAFORmat?

Info

B<x> is the number of the bus.
DATA specifies a DATA field width of 19 bits (covering bits 11 through 29 of the 32 bit packet).
SDIDATA specifies a DATA field width of 21 bits (covering bits 9 through 29 of the 32 bit packet).
SDIDATASSM specifies a DATA field width of 23 bits (covering bits 9 through 31 of the 32 bit packet).

polarity `property` ¶

polarity: BusBItemArinc429aPolarity

Return the BUS:B<x>:ARINC429A:POLARITY command.

Description

This command sets or queries the source polarity for the specified ARINC429 bus. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:ARINC429A:POLARITY? query.
Using the .verify(value) method will send the BUS:B<x>:ARINC429A:POLARITY? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:ARINC429A:POLARITY value command.

SCPI Syntax

- BUS:B<x>:ARINC429A:POLARITY {NORMal|INVERTed}
- BUS:B<x>:ARINC429A:POLARITY?

Info

B<x> is the number of the bus.
NORMal specifies normal polarity.
INVERTed specifies inverted polarity.

source `property` ¶

source: BusBItemArinc429aSource

Return the BUS:B<x>:ARINC429A:SOUrce command.

Description

This command sets or queries the source for the specified ARINC429 bus. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:ARINC429A:SOUrce? query.
Using the .verify(value) method will send the BUS:B<x>:ARINC429A:SOUrce? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:ARINC429A:SOUrce value command.

SCPI Syntax

- BUS:B<x>:ARINC429A:SOUrce {S<x>_Ch<x>|CH<x>|Math<x>|REF<x>}
- BUS:B<x>:ARINC429A:SOUrce?

Info

S<x>_Ch<x> specifies the remote scope number and the analog channel.
CH<x> specifies an analog channel as the source waveform for the ARINC429 bus.
Math<x> specifies a math waveform as the source waveform for the ARINC429 bus.
REF<x> specifies a reference waveform as the source waveform for the ARINC429 bus.

threshold `property` ¶

threshold: BusBItemArinc429aThreshold

Return the BUS:B<x>:ARINC429A:THRESHold command.

Description

This command sets or queries the ARINC429 upper threshold for the specified bus. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:ARINC429A:THRESHold? query.
Using the .verify(value) method will send the BUS:B<x>:ARINC429A:THRESHold? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:ARINC429A:THRESHold value command.

SCPI Syntax

- BUS:B<x>:ARINC429A:THRESHold <NR3>
- BUS:B<x>:ARINC429A:THRESHold?

Info

B<x> is the number of the bus.
<NR3> is the ARINC429 lower threshold for the specified bus.

BusBItemArinc429aBitrate ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:ARINC429A:BITRate command.

Description

This command sets or queries the ARINC429 bit rate for the specified bus. The bus number is specified by x. If you select Custom, use BUS:B<x>:ARINC429A:BITRate:CUSTom to set the bit rate.

Usage

Using the .query() method will send the BUS:B<x>:ARINC429A:BITRate? query.
Using the .verify(value) method will send the BUS:B<x>:ARINC429A:BITRate? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:ARINC429A:BITRate value command.

SCPI Syntax

- BUS:B<x>:ARINC429A:BITRate {LOW|HI|CUSTom}
- BUS:B<x>:ARINC429A:BITRate?

Info

B<x> is the number of the bus.
LOW sets the bit rate to handle low speed signals.
HI sets the bit rate to handle high speed signals.
CUSTom uses the custom bit rate set by BUS:B<x>:ARINC429A:BITRate:CUSTom.

Properties

.custom: The BUS:B<x>:ARINC429A:BITRate:CUSTom command.

custom `property` ¶

custom: BusBItemArinc429aBitrateCustom

Return the BUS:B<x>:ARINC429A:BITRate:CUSTom command.

Description

This command sets or queries the ARINC429 custom bit rate for the specified bus. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:ARINC429A:BITRate:CUSTom? query.
Using the .verify(value) method will send the BUS:B<x>:ARINC429A:BITRate:CUSTom? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:ARINC429A:BITRate:CUSTom value command.

SCPI Syntax

- BUS:B<x>:ARINC429A:BITRate:CUSTom <NR1>
- BUS:B<x>:ARINC429A:BITRate:CUSTom?

Info

B<x> is the number of the bus.
<NR1> is the ARINC429 custom bit rate for the specified bus.

BusBItemArinc429aBitrateCustom ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:ARINC429A:BITRate:CUSTom command.

Description

This command sets or queries the ARINC429 custom bit rate for the specified bus. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:ARINC429A:BITRate:CUSTom? query.
Using the .verify(value) method will send the BUS:B<x>:ARINC429A:BITRate:CUSTom? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:ARINC429A:BITRate:CUSTom value command.

SCPI Syntax

- BUS:B<x>:ARINC429A:BITRate:CUSTom <NR1>
- BUS:B<x>:ARINC429A:BITRate:CUSTom?

Info

B<x> is the number of the bus.
<NR1> is the ARINC429 custom bit rate for the specified bus.

BusBItemArinc429aDataformat ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:ARINC429A:DATAFORmat command.

Description

This command sets or queries the format of the DATA field for the specified ARINC429 bus. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:ARINC429A:DATAFORmat? query.
Using the .verify(value) method will send the BUS:B<x>:ARINC429A:DATAFORmat? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:ARINC429A:DATAFORmat value command.

SCPI Syntax

- BUS:B<x>:ARINC429A:DATAFORmat {DATA|SDIDATA|SDIDATASSM}
- BUS:B<x>:ARINC429A:DATAFORmat?

Info

B<x> is the number of the bus.
DATA specifies a DATA field width of 19 bits (covering bits 11 through 29 of the 32 bit packet).
SDIDATA specifies a DATA field width of 21 bits (covering bits 9 through 29 of the 32 bit packet).
SDIDATASSM specifies a DATA field width of 23 bits (covering bits 9 through 31 of the 32 bit packet).

BusBItemArinc429aPolarity ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:ARINC429A:POLARITY command.

Description

This command sets or queries the source polarity for the specified ARINC429 bus. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:ARINC429A:POLARITY? query.
Using the .verify(value) method will send the BUS:B<x>:ARINC429A:POLARITY? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:ARINC429A:POLARITY value command.

SCPI Syntax

- BUS:B<x>:ARINC429A:POLARITY {NORMal|INVERTed}
- BUS:B<x>:ARINC429A:POLARITY?

Info

B<x> is the number of the bus.
NORMal specifies normal polarity.
INVERTed specifies inverted polarity.

BusBItemArinc429aSource ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:ARINC429A:SOUrce command.

Description

This command sets or queries the source for the specified ARINC429 bus. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:ARINC429A:SOUrce? query.
Using the .verify(value) method will send the BUS:B<x>:ARINC429A:SOUrce? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:ARINC429A:SOUrce value command.

SCPI Syntax

- BUS:B<x>:ARINC429A:SOUrce {S<x>_Ch<x>|CH<x>|Math<x>|REF<x>}
- BUS:B<x>:ARINC429A:SOUrce?

Info

S<x>_Ch<x> specifies the remote scope number and the analog channel.
CH<x> specifies an analog channel as the source waveform for the ARINC429 bus.
Math<x> specifies a math waveform as the source waveform for the ARINC429 bus.
REF<x> specifies a reference waveform as the source waveform for the ARINC429 bus.

BusBItemArinc429aThreshold ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:ARINC429A:THRESHold command.

Description

This command sets or queries the ARINC429 upper threshold for the specified bus. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:ARINC429A:THRESHold? query.
Using the .verify(value) method will send the BUS:B<x>:ARINC429A:THRESHold? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:ARINC429A:THRESHold value command.

SCPI Syntax

- BUS:B<x>:ARINC429A:THRESHold <NR3>
- BUS:B<x>:ARINC429A:THRESHold?

Info

B<x> is the number of the bus.
<NR3> is the ARINC429 lower threshold for the specified bus.

BusBItemAudio ¶

Bases: SCPICmdRead

The BUS:B<x>:AUDio command tree.

Usage

Using the .query() method will send the BUS:B<x>:AUDio? query.
Using the .verify(value) method will send the BUS:B<x>:AUDio? query and raise an AssertionError if the returned value does not match value.

Info

B<x> is the number of the bus.

Properties

.bitdelay: The BUS:B<x>:AUDio:BITDelay command.
.bitorder: The BUS:B<x>:AUDio:BITOrder command.
.clock: The BUS:B<x>:AUDio:CLOCk command tree.
.data: The BUS:B<x>:AUDio:DATa command tree.
.frame: The BUS:B<x>:AUDio:FRAME command tree.
.type: The BUS:B<x>:AUDio:TYPe command.
.wordsel: The BUS:B<x>:AUDio:WORDSel command tree.

bitdelay `property` ¶

bitdelay: BusBItemAudioBitdelay

Return the BUS:B<x>:AUDio:BITDelay command.

Description

Specifies the number of delay bits for the AUDIO bus.

Usage

Using the .query() method will send the BUS:B<x>:AUDio:BITDelay? query.
Using the .verify(value) method will send the BUS:B<x>:AUDio:BITDelay? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:AUDio:BITDelay value command.

SCPI Syntax

- BUS:B<x>:AUDio:BITDelay <NR1>
- BUS:B<x>:AUDio:BITDelay?

Info

B<x> is the number of the bus.
<NR1> specifies the number of delay bits.

bitorder `property` ¶

bitorder: BusBItemAudioBitorder

Return the BUS:B<x>:AUDio:BITOrder command.

Description

Specifies the bit order for the AUDIO bus.

Usage

Using the .query() method will send the BUS:B<x>:AUDio:BITOrder? query.
Using the .verify(value) method will send the BUS:B<x>:AUDio:BITOrder? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:AUDio:BITOrder value command.

SCPI Syntax

- BUS:B<x>:AUDio:BITOrder {MSB|LSB}
- BUS:B<x>:AUDio:BITOrder?

Info

B<x> is the number of the bus.
MSB specifies that the most significant bit will be expected first in the order.
LSB specifies that the least significant bit will be expected first in the order.

clock `property` ¶

clock: BusBItemAudioClock

Return the BUS:B<x>:AUDio:CLOCk command tree.

Usage

Using the .query() method will send the BUS:B<x>:AUDio:CLOCk? query.
Using the .verify(value) method will send the BUS:B<x>:AUDio:CLOCk? query and raise an AssertionError if the returned value does not match value.

Info

B<x> is the number of the bus.

Sub-properties

.polarity: The BUS:B<x>:AUDio:CLOCk:POLarity command.
.source: The BUS:B<x>:AUDio:CLOCk:SOUrce command.
.threshold: The BUS:B<x>:AUDio:CLOCk:THReshold command.

data `property` ¶

data: BusBItemAudioData

Return the BUS:B<x>:AUDio:DATa command tree.

Usage

Using the .query() method will send the BUS:B<x>:AUDio:DATa? query.
Using the .verify(value) method will send the BUS:B<x>:AUDio:DATa? query and raise an AssertionError if the returned value does not match value.

Info

B<x> is the number of the bus.

Sub-properties

.polarity: The BUS:B<x>:AUDio:DATa:POLarity command.
.size: The BUS:B<x>:AUDio:DATa:SIZe command.
.source: The BUS:B<x>:AUDio:DATa:SOUrce command.
.threshold: The BUS:B<x>:AUDio:DATa:THReshold command.
.wordsize: The BUS:B<x>:AUDio:DATa:WORDSize command.

frame `property` ¶

frame: BusBItemAudioFrame

Return the BUS:B<x>:AUDio:FRAME command tree.

Usage

Using the .query() method will send the BUS:B<x>:AUDio:FRAME? query.
Using the .verify(value) method will send the BUS:B<x>:AUDio:FRAME? query and raise an AssertionError if the returned value does not match value.

Info

B<x> is the number of the bus.

Sub-properties

.clockbitsperchannel: The BUS:B<x>:AUDio:FRAME:CLOCKBITSPERCHANNEL command.
.size: The BUS:B<x>:AUDio:FRAME:SIZe command.

type `property` ¶

type: BusBItemAudioType

Return the BUS:B<x>:AUDio:TYPe command.

Description

Specifies the audio format (type) for the AUDIO bus.

Usage

Using the .query() method will send the BUS:B<x>:AUDio:TYPe? query.
Using the .verify(value) method will send the BUS:B<x>:AUDio:TYPe? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:AUDio:TYPe value command.

SCPI Syntax

- BUS:B<x>:AUDio:TYPe {I2S|LJ|RJ|TDM}
- BUS:B<x>:AUDio:TYPe?

Info

B<x> is the number of the bus.
I2S specifies the I2S audio format.
LJ specifies the left-justified audio format.
RJ specifies the right-justified audio format.
TDM specifies the time-division multiplexing audio format.

wordsel `property` ¶

wordsel: BusBItemAudioWordsel

Return the BUS:B<x>:AUDio:WORDSel command tree.

Usage

Using the .query() method will send the BUS:B<x>:AUDio:WORDSel? query.
Using the .verify(value) method will send the BUS:B<x>:AUDio:WORDSel? query and raise an AssertionError if the returned value does not match value.

Info

B<x> is the number of the bus.

Sub-properties

.polarity: The BUS:B<x>:AUDio:WORDSel:POLarity command.
.source: The BUS:B<x>:AUDio:WORDSel:SOUrce command.
.threshold: The BUS:B<x>:AUDio:WORDSel:THReshold command.

BusBItemAudioBitdelay ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:AUDio:BITDelay command.

Description

Specifies the number of delay bits for the AUDIO bus.

Usage

Using the .query() method will send the BUS:B<x>:AUDio:BITDelay? query.
Using the .verify(value) method will send the BUS:B<x>:AUDio:BITDelay? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:AUDio:BITDelay value command.

SCPI Syntax

- BUS:B<x>:AUDio:BITDelay <NR1>
- BUS:B<x>:AUDio:BITDelay?

Info

B<x> is the number of the bus.
<NR1> specifies the number of delay bits.

BusBItemAudioBitorder ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:AUDio:BITOrder command.

Description

Specifies the bit order for the AUDIO bus.

Usage

Using the .query() method will send the BUS:B<x>:AUDio:BITOrder? query.
Using the .verify(value) method will send the BUS:B<x>:AUDio:BITOrder? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:AUDio:BITOrder value command.

SCPI Syntax

- BUS:B<x>:AUDio:BITOrder {MSB|LSB}
- BUS:B<x>:AUDio:BITOrder?

Info

B<x> is the number of the bus.
MSB specifies that the most significant bit will be expected first in the order.
LSB specifies that the least significant bit will be expected first in the order.

BusBItemAudioClock ¶

Bases: SCPICmdRead

The BUS:B<x>:AUDio:CLOCk command tree.

Usage

Using the .query() method will send the BUS:B<x>:AUDio:CLOCk? query.
Using the .verify(value) method will send the BUS:B<x>:AUDio:CLOCk? query and raise an AssertionError if the returned value does not match value.

Info

B<x> is the number of the bus.

Properties

.polarity: The BUS:B<x>:AUDio:CLOCk:POLarity command.
.source: The BUS:B<x>:AUDio:CLOCk:SOUrce command.
.threshold: The BUS:B<x>:AUDio:CLOCk:THReshold command.

polarity `property` ¶

polarity: BusBItemAudioClockPolarity

Return the BUS:B<x>:AUDio:CLOCk:POLarity command.

Description

This command sets or queries the clock source polarity for the specified AUDIO bus. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:AUDio:CLOCk:POLarity? query.
Using the .verify(value) method will send the BUS:B<x>:AUDio:CLOCk:POLarity? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:AUDio:CLOCk:POLarity value command.

SCPI Syntax

- BUS:B<x>:AUDio:CLOCk:POLarity {FALL|RISE}
- BUS:B<x>:AUDio:CLOCk:POLarity?

Info

B<x> is the number of the bus.
FALL sets falling edge as the clock polarity.
RISE sets rising edge as the clock polarity.

source `property` ¶

source: BusBItemAudioClockSource

Return the BUS:B<x>:AUDio:CLOCk:SOUrce command.

Description

This command sets or queries the clock source waveform for the specified AUDIO bus. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:AUDio:CLOCk:SOUrce? query.
Using the .verify(value) method will send the BUS:B<x>:AUDio:CLOCk:SOUrce? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:AUDio:CLOCk:SOUrce value command.

SCPI Syntax

- BUS:B<x>:AUDio:CLOCk:SOUrce {S<x>_Ch<x>_D<x>|CH<x>|CH<x>_D<x>|Math<x>|REF<x>|REF<x>_D<x>}
- BUS:B<x>:AUDio:CLOCk:SOUrce?

Info

B<x> is the number of the bus.
S<x>_Ch<x>_D<x> specifies is the remote scope number, the analog channel and the digital channel.
CH<x> specifies an analog channel as the clock source waveform for the audio bus.
CH<x>_D<x> specifies a digital channel as the clock source waveform for the specified audio bus.
Math<x> specifies a math waveform as the clock source waveform for the audio bus.
REF<x> specifies a reference waveform as the clock source waveform for the audio bus.
REF<x>_D<x> specifies a digital reference waveform as the clock source waveform for the specified audio bus.

threshold `property` ¶

threshold: BusBItemAudioClockThreshold

Return the BUS:B<x>:AUDio:CLOCk:THReshold command.

Description

This command sets or queries the audio clock source threshold for the specified bus. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:AUDio:CLOCk:THReshold? query.
Using the .verify(value) method will send the BUS:B<x>:AUDio:CLOCk:THReshold? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:AUDio:CLOCk:THReshold value command.

SCPI Syntax

- BUS:B<x>:AUDio:CLOCk:THReshold <NR3>
- BUS:B<x>:AUDio:CLOCk:THReshold?

Info

B<x> is the number of the bus.
<NR3> is the audio clock source threshold for the specified bus.

BusBItemAudioClockPolarity ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:AUDio:CLOCk:POLarity command.

Description

This command sets or queries the clock source polarity for the specified AUDIO bus. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:AUDio:CLOCk:POLarity? query.
Using the .verify(value) method will send the BUS:B<x>:AUDio:CLOCk:POLarity? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:AUDio:CLOCk:POLarity value command.

SCPI Syntax

- BUS:B<x>:AUDio:CLOCk:POLarity {FALL|RISE}
- BUS:B<x>:AUDio:CLOCk:POLarity?

Info

B<x> is the number of the bus.
FALL sets falling edge as the clock polarity.
RISE sets rising edge as the clock polarity.

BusBItemAudioClockSource ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:AUDio:CLOCk:SOUrce command.

Description

This command sets or queries the clock source waveform for the specified AUDIO bus. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:AUDio:CLOCk:SOUrce? query.
Using the .verify(value) method will send the BUS:B<x>:AUDio:CLOCk:SOUrce? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:AUDio:CLOCk:SOUrce value command.

SCPI Syntax

- BUS:B<x>:AUDio:CLOCk:SOUrce {S<x>_Ch<x>_D<x>|CH<x>|CH<x>_D<x>|Math<x>|REF<x>|REF<x>_D<x>}
- BUS:B<x>:AUDio:CLOCk:SOUrce?

Info

B<x> is the number of the bus.
S<x>_Ch<x>_D<x> specifies is the remote scope number, the analog channel and the digital channel.
CH<x> specifies an analog channel as the clock source waveform for the audio bus.
CH<x>_D<x> specifies a digital channel as the clock source waveform for the specified audio bus.
Math<x> specifies a math waveform as the clock source waveform for the audio bus.
REF<x> specifies a reference waveform as the clock source waveform for the audio bus.
REF<x>_D<x> specifies a digital reference waveform as the clock source waveform for the specified audio bus.

BusBItemAudioClockThreshold ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:AUDio:CLOCk:THReshold command.

Description

This command sets or queries the audio clock source threshold for the specified bus. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:AUDio:CLOCk:THReshold? query.
Using the .verify(value) method will send the BUS:B<x>:AUDio:CLOCk:THReshold? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:AUDio:CLOCk:THReshold value command.

SCPI Syntax

- BUS:B<x>:AUDio:CLOCk:THReshold <NR3>
- BUS:B<x>:AUDio:CLOCk:THReshold?

Info

B<x> is the number of the bus.
<NR3> is the audio clock source threshold for the specified bus.

BusBItemAudioData ¶

Bases: SCPICmdRead

The BUS:B<x>:AUDio:DATa command tree.

Usage

Using the .query() method will send the BUS:B<x>:AUDio:DATa? query.
Using the .verify(value) method will send the BUS:B<x>:AUDio:DATa? query and raise an AssertionError if the returned value does not match value.

Info

B<x> is the number of the bus.

Properties

.polarity: The BUS:B<x>:AUDio:DATa:POLarity command.
.size: The BUS:B<x>:AUDio:DATa:SIZe command.
.source: The BUS:B<x>:AUDio:DATa:SOUrce command.
.threshold: The BUS:B<x>:AUDio:DATa:THReshold command.
.wordsize: The BUS:B<x>:AUDio:DATa:WORDSize command.

polarity `property` ¶

polarity: BusBItemAudioDataPolarity

Return the BUS:B<x>:AUDio:DATa:POLarity command.

Description

This command sets or queries the audio data source polarity for the specified audio bus. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:AUDio:DATa:POLarity? query.
Using the .verify(value) method will send the BUS:B<x>:AUDio:DATa:POLarity? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:AUDio:DATa:POLarity value command.

SCPI Syntax

- BUS:B<x>:AUDio:DATa:POLarity {HIGH|LOW}
- BUS:B<x>:AUDio:DATa:POLarity?

Info

B<x> is the number of the bus.
HIGH specifies positive data polarity for the audio bus.
LOW specifies negative data polarity for the audio bus.

size `property` ¶

size: BusBItemAudioDataSize

Return the BUS:B<x>:AUDio:DATa:SIZe command.

Description

Specifies the number of bits per word for the AUDIO bus.

Usage

Using the .query() method will send the BUS:B<x>:AUDio:DATa:SIZe? query.
Using the .verify(value) method will send the BUS:B<x>:AUDio:DATa:SIZe? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:AUDio:DATa:SIZe value command.

SCPI Syntax

- BUS:B<x>:AUDio:DATa:SIZe <NR1>
- BUS:B<x>:AUDio:DATa:SIZe?

Info

B<x> is the number of the bus.
<NR1> specifies the number of bits per word.

source `property` ¶

source: BusBItemAudioDataSource

Return the BUS:B<x>:AUDio:DATa:SOUrce command.

Description

This command sets or queries the audio data source for the specified audio bus. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:AUDio:DATa:SOUrce? query.
Using the .verify(value) method will send the BUS:B<x>:AUDio:DATa:SOUrce? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:AUDio:DATa:SOUrce value command.

SCPI Syntax

- BUS:B<x>:AUDio:DATa:SOUrce {S<x>_Ch<x>_D<x>|CH<x>|CH<x>_D<x>|MATH<x>|REF<x>|REF<x>_D<x>}
- BUS:B<x>:AUDio:DATa:SOUrce?

Info

B<x> is the number of the bus.
S<x>_Ch<x>_D<x> specifies is the remote scope number, the analog channel and the digital channel.
CH<x> specifies an analog channel as the data source waveform for the audio bus.
CH<x>_D<x> specifies a digital channel as the data source waveform for the audio bus.
MATH<x> specifies an math waveform as the data source waveform for the audio bus.
REF<x> specifies an reference waveform as the data source waveform for the audio bus.
REF<x>_D<x> specifies a digital reference waveform as the data source waveform for the specified audio bus.

threshold `property` ¶

threshold: BusBItemAudioDataThreshold

Return the BUS:B<x>:AUDio:DATa:THReshold command.

Description

This command sets or queries the audio data source threshold for the specified bus. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:AUDio:DATa:THReshold? query.
Using the .verify(value) method will send the BUS:B<x>:AUDio:DATa:THReshold? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:AUDio:DATa:THReshold value command.

SCPI Syntax

- BUS:B<x>:AUDio:DATa:THReshold <NR3>
- BUS:B<x>:AUDio:DATa:THReshold?

Info

B<x> is the number of the bus.
<NR3> is the audio data source threshold for the specified bus.

wordsize `property` ¶

wordsize: BusBItemAudioDataWordsize

Return the BUS:B<x>:AUDio:DATa:WORDSize command.

Description

This command sets or queries the audio bits per word for the specified bus. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:AUDio:DATa:WORDSize? query.
Using the .verify(value) method will send the BUS:B<x>:AUDio:DATa:WORDSize? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:AUDio:DATa:WORDSize value command.

SCPI Syntax

- BUS:B<x>:AUDio:DATa:WORDSize <NR1>
- BUS:B<x>:AUDio:DATa:WORDSize?

Info

B<x> is the number of the bus.
<NR1> is the audio bits per word for the specified bus.

BusBItemAudioDataPolarity ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:AUDio:DATa:POLarity command.

Description

This command sets or queries the audio data source polarity for the specified audio bus. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:AUDio:DATa:POLarity? query.
Using the .verify(value) method will send the BUS:B<x>:AUDio:DATa:POLarity? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:AUDio:DATa:POLarity value command.

SCPI Syntax

- BUS:B<x>:AUDio:DATa:POLarity {HIGH|LOW}
- BUS:B<x>:AUDio:DATa:POLarity?

Info

B<x> is the number of the bus.
HIGH specifies positive data polarity for the audio bus.
LOW specifies negative data polarity for the audio bus.

BusBItemAudioDataSize ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:AUDio:DATa:SIZe command.

Description

Specifies the number of bits per word for the AUDIO bus.

Usage

Using the .query() method will send the BUS:B<x>:AUDio:DATa:SIZe? query.
Using the .verify(value) method will send the BUS:B<x>:AUDio:DATa:SIZe? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:AUDio:DATa:SIZe value command.

SCPI Syntax

- BUS:B<x>:AUDio:DATa:SIZe <NR1>
- BUS:B<x>:AUDio:DATa:SIZe?

Info

B<x> is the number of the bus.
<NR1> specifies the number of bits per word.

BusBItemAudioDataSource ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:AUDio:DATa:SOUrce command.

Description

This command sets or queries the audio data source for the specified audio bus. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:AUDio:DATa:SOUrce? query.
Using the .verify(value) method will send the BUS:B<x>:AUDio:DATa:SOUrce? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:AUDio:DATa:SOUrce value command.

SCPI Syntax

- BUS:B<x>:AUDio:DATa:SOUrce {S<x>_Ch<x>_D<x>|CH<x>|CH<x>_D<x>|MATH<x>|REF<x>|REF<x>_D<x>}
- BUS:B<x>:AUDio:DATa:SOUrce?

Info

B<x> is the number of the bus.
S<x>_Ch<x>_D<x> specifies is the remote scope number, the analog channel and the digital channel.
CH<x> specifies an analog channel as the data source waveform for the audio bus.
CH<x>_D<x> specifies a digital channel as the data source waveform for the audio bus.
MATH<x> specifies an math waveform as the data source waveform for the audio bus.
REF<x> specifies an reference waveform as the data source waveform for the audio bus.
REF<x>_D<x> specifies a digital reference waveform as the data source waveform for the specified audio bus.

BusBItemAudioDataThreshold ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:AUDio:DATa:THReshold command.

Description

This command sets or queries the audio data source threshold for the specified bus. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:AUDio:DATa:THReshold? query.
Using the .verify(value) method will send the BUS:B<x>:AUDio:DATa:THReshold? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:AUDio:DATa:THReshold value command.

SCPI Syntax

- BUS:B<x>:AUDio:DATa:THReshold <NR3>
- BUS:B<x>:AUDio:DATa:THReshold?

Info

B<x> is the number of the bus.
<NR3> is the audio data source threshold for the specified bus.

BusBItemAudioDataWordsize ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:AUDio:DATa:WORDSize command.

Description

This command sets or queries the audio bits per word for the specified bus. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:AUDio:DATa:WORDSize? query.
Using the .verify(value) method will send the BUS:B<x>:AUDio:DATa:WORDSize? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:AUDio:DATa:WORDSize value command.

SCPI Syntax

- BUS:B<x>:AUDio:DATa:WORDSize <NR1>
- BUS:B<x>:AUDio:DATa:WORDSize?

Info

B<x> is the number of the bus.
<NR1> is the audio bits per word for the specified bus.

BusBItemAudioFrame ¶

Bases: SCPICmdRead

The BUS:B<x>:AUDio:FRAME command tree.

Usage

Using the .query() method will send the BUS:B<x>:AUDio:FRAME? query.
Using the .verify(value) method will send the BUS:B<x>:AUDio:FRAME? query and raise an AssertionError if the returned value does not match value.

Info

B<x> is the number of the bus.

Properties

.clockbitsperchannel: The BUS:B<x>:AUDio:FRAME:CLOCKBITSPERCHANNEL command.
.size: The BUS:B<x>:AUDio:FRAME:SIZe command.

clockbitsperchannel `property` ¶

clockbitsperchannel: BusBItemAudioFrameClockbitsperchannel

Return the BUS:B<x>:AUDio:FRAME:CLOCKBITSPERCHANNEL command.

Description

This command sets or queries the audio bits of sync width for the specified bus. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:AUDio:FRAME:CLOCKBITSPERCHANNEL? query.
Using the .verify(value) method will send the BUS:B<x>:AUDio:FRAME:CLOCKBITSPERCHANNEL? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:AUDio:FRAME:CLOCKBITSPERCHANNEL value command.

SCPI Syntax

- BUS:B<x>:AUDio:FRAME:CLOCKBITSPERCHANNEL <NR1>
- BUS:B<x>:AUDio:FRAME:CLOCKBITSPERCHANNEL?

Info

B<x> is the number of the bus.
<NR1> is the audio bits of sync width for the specified bus.

size `property` ¶

size: BusBItemAudioFrameSize

Return the BUS:B<x>:AUDio:FRAME:SIZe command.

Description

Specifies the number of channels in each frame for the AUDIO bus.

Usage

Using the .query() method will send the BUS:B<x>:AUDio:FRAME:SIZe? query.
Using the .verify(value) method will send the BUS:B<x>:AUDio:FRAME:SIZe? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:AUDio:FRAME:SIZe value command.

SCPI Syntax

- BUS:B<x>:AUDio:FRAME:SIZe <NR1>
- BUS:B<x>:AUDio:FRAME:SIZe?

Info

B<x> is the number of the bus.
<NR1> specifies the number of channels in each frame.

BusBItemAudioFrameClockbitsperchannel ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:AUDio:FRAME:CLOCKBITSPERCHANNEL command.

Description

This command sets or queries the audio bits of sync width for the specified bus. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:AUDio:FRAME:CLOCKBITSPERCHANNEL? query.
Using the .verify(value) method will send the BUS:B<x>:AUDio:FRAME:CLOCKBITSPERCHANNEL? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:AUDio:FRAME:CLOCKBITSPERCHANNEL value command.

SCPI Syntax

- BUS:B<x>:AUDio:FRAME:CLOCKBITSPERCHANNEL <NR1>
- BUS:B<x>:AUDio:FRAME:CLOCKBITSPERCHANNEL?

Info

B<x> is the number of the bus.
<NR1> is the audio bits of sync width for the specified bus.

BusBItemAudioFrameSize ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:AUDio:FRAME:SIZe command.

Description

Specifies the number of channels in each frame for the AUDIO bus.

Usage

Using the .query() method will send the BUS:B<x>:AUDio:FRAME:SIZe? query.
Using the .verify(value) method will send the BUS:B<x>:AUDio:FRAME:SIZe? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:AUDio:FRAME:SIZe value command.

SCPI Syntax

- BUS:B<x>:AUDio:FRAME:SIZe <NR1>
- BUS:B<x>:AUDio:FRAME:SIZe?

Info

B<x> is the number of the bus.
<NR1> specifies the number of channels in each frame.

BusBItemAudioType ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:AUDio:TYPe command.

Description

Specifies the audio format (type) for the AUDIO bus.

Usage

Using the .query() method will send the BUS:B<x>:AUDio:TYPe? query.
Using the .verify(value) method will send the BUS:B<x>:AUDio:TYPe? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:AUDio:TYPe value command.

SCPI Syntax

- BUS:B<x>:AUDio:TYPe {I2S|LJ|RJ|TDM}
- BUS:B<x>:AUDio:TYPe?

Info

B<x> is the number of the bus.
I2S specifies the I2S audio format.
LJ specifies the left-justified audio format.
RJ specifies the right-justified audio format.
TDM specifies the time-division multiplexing audio format.

BusBItemAudioWordsel ¶

Bases: SCPICmdRead

The BUS:B<x>:AUDio:WORDSel command tree.

Usage

Using the .query() method will send the BUS:B<x>:AUDio:WORDSel? query.
Using the .verify(value) method will send the BUS:B<x>:AUDio:WORDSel? query and raise an AssertionError if the returned value does not match value.

Info

B<x> is the number of the bus.

Properties

.polarity: The BUS:B<x>:AUDio:WORDSel:POLarity command.
.source: The BUS:B<x>:AUDio:WORDSel:SOUrce command.
.threshold: The BUS:B<x>:AUDio:WORDSel:THReshold command.

polarity `property` ¶

polarity: BusBItemAudioWordselPolarity

Return the BUS:B<x>:AUDio:WORDSel:POLarity command.

Description

Specifies the word select polarity for the AUDIO bus.

Usage

Using the .query() method will send the BUS:B<x>:AUDio:WORDSel:POLarity? query.
Using the .verify(value) method will send the BUS:B<x>:AUDio:WORDSel:POLarity? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:AUDio:WORDSel:POLarity value command.

SCPI Syntax

- BUS:B<x>:AUDio:WORDSel:POLarity {NORMal|INVERTed}
- BUS:B<x>:AUDio:WORDSel:POLarity?

Info

B<x> is the number of the bus.
NORMal specifies positive WORDSel polarity.
INVERTed specifies negative WORDSel polarity.

source `property` ¶

source: BusBItemAudioWordselSource

Return the BUS:B<x>:AUDio:WORDSel:SOUrce command.

Description

This command sets or queries the audio word select source waveform for the specified audio bus. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:AUDio:WORDSel:SOUrce? query.
Using the .verify(value) method will send the BUS:B<x>:AUDio:WORDSel:SOUrce? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:AUDio:WORDSel:SOUrce value command.

SCPI Syntax

- BUS:B<x>:AUDio:WORDSel:SOUrce {S<x>_Ch<x>_D<x>|CH<x>|CH<x>_D<x>|MATH<x>|REF<x>|REF<x>_D<x>}
- BUS:B<x>:AUDio:WORDSel:SOUrce?

Info

B<x> is the number of the bus.
S<x>_Ch<x>_D<x> specifies is the remote scope number, the analog channel and the digital channel.
CH<x> specifies an analog channel as the word select source waveform.
CH<x>_D<x> specifies a digital channel as the word select source waveform.
MATH<x> specifies an math waveform as the word select source waveform.
REF<x> specifies an reference waveform as the word select source waveform.
REF<x>_D<x> specifies a digital reference waveform as the word select source waveform for the specified audio bus.

threshold `property` ¶

threshold: BusBItemAudioWordselThreshold

Return the BUS:B<x>:AUDio:WORDSel:THReshold command.

Description

This command sets or queries the audio word select source threshold for the specified bus. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:AUDio:WORDSel:THReshold? query.
Using the .verify(value) method will send the BUS:B<x>:AUDio:WORDSel:THReshold? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:AUDio:WORDSel:THReshold value command.

SCPI Syntax

- BUS:B<x>:AUDio:WORDSel:THReshold <NR3>
- BUS:B<x>:AUDio:WORDSel:THReshold?

Info

B<x> is the number of the bus.
<NR3> is the audio word select source threshold for the specified bus.

BusBItemAudioWordselPolarity ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:AUDio:WORDSel:POLarity command.

Description

Specifies the word select polarity for the AUDIO bus.

Usage

Using the .query() method will send the BUS:B<x>:AUDio:WORDSel:POLarity? query.
Using the .verify(value) method will send the BUS:B<x>:AUDio:WORDSel:POLarity? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:AUDio:WORDSel:POLarity value command.

SCPI Syntax

- BUS:B<x>:AUDio:WORDSel:POLarity {NORMal|INVERTed}
- BUS:B<x>:AUDio:WORDSel:POLarity?

Info

B<x> is the number of the bus.
NORMal specifies positive WORDSel polarity.
INVERTed specifies negative WORDSel polarity.

BusBItemAudioWordselSource ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:AUDio:WORDSel:SOUrce command.

Description

This command sets or queries the audio word select source waveform for the specified audio bus. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:AUDio:WORDSel:SOUrce? query.
Using the .verify(value) method will send the BUS:B<x>:AUDio:WORDSel:SOUrce? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:AUDio:WORDSel:SOUrce value command.

SCPI Syntax

- BUS:B<x>:AUDio:WORDSel:SOUrce {S<x>_Ch<x>_D<x>|CH<x>|CH<x>_D<x>|MATH<x>|REF<x>|REF<x>_D<x>}
- BUS:B<x>:AUDio:WORDSel:SOUrce?

Info

B<x> is the number of the bus.
S<x>_Ch<x>_D<x> specifies is the remote scope number, the analog channel and the digital channel.
CH<x> specifies an analog channel as the word select source waveform.
CH<x>_D<x> specifies a digital channel as the word select source waveform.
MATH<x> specifies an math waveform as the word select source waveform.
REF<x> specifies an reference waveform as the word select source waveform.
REF<x>_D<x> specifies a digital reference waveform as the word select source waveform for the specified audio bus.

BusBItemAudioWordselThreshold ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:AUDio:WORDSel:THReshold command.

Description

This command sets or queries the audio word select source threshold for the specified bus. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:AUDio:WORDSel:THReshold? query.
Using the .verify(value) method will send the BUS:B<x>:AUDio:WORDSel:THReshold? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:AUDio:WORDSel:THReshold value command.

SCPI Syntax

- BUS:B<x>:AUDio:WORDSel:THReshold <NR3>
- BUS:B<x>:AUDio:WORDSel:THReshold?

Info

B<x> is the number of the bus.
<NR3> is the audio word select source threshold for the specified bus.

BusBItemAutoethernet ¶

Bases: SCPICmdRead

The BUS:B<x>:AUTOETHERnet command tree.

Usage

Using the .query() method will send the BUS:B<x>:AUTOETHERnet? query.
Using the .verify(value) method will send the BUS:B<x>:AUTOETHERnet? query and raise an AssertionError if the returned value does not match value.

Info

B<x> is the Bus number.

Properties

.dataminusthreshold: The BUS:B<x>:AUTOETHERnet:DATAMINUSTHRESHOLD command.
.dataplusthreshold: The BUS:B<x>:AUTOETHERnet:DATAPLUSTHRESHold command.
.lowdataminus: The BUS:B<x>:AUTOETHERnet:LOWDATAMINus command.
.lowdataplus: The BUS:B<x>:AUTOETHERnet:LOWDATAPLUS command.
.lowthreshold: The BUS:B<x>:AUTOETHERnet:LOWTHRESHold command.
.signaltype: The BUS:B<x>:AUTOETHERnet:SIGNALTYpe command.
.source: The BUS:B<x>:AUTOETHERnet:SOUrce command.
.threshold: The BUS:B<x>:AUTOETHERnet:THRESHold command.
.type: The BUS:B<x>:AUTOETHERnet:TYPe command.

dataminusthreshold `property` ¶

dataminusthreshold: BusBItemAutoethernetDataminusthreshold

Return the BUS:B<x>:AUTOETHERnet:DATAMINUSTHRESHOLD command.

Description

This command sets or queries the AutoEthernet D- source threshold level for the specified bus. This threshold only applies when the AutoEthernet signal type is single ended.

Usage

Using the .query() method will send the BUS:B<x>:AUTOETHERnet:DATAMINUSTHRESHOLD? query.
Using the .verify(value) method will send the BUS:B<x>:AUTOETHERnet:DATAMINUSTHRESHOLD? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:AUTOETHERnet:DATAMINUSTHRESHOLD value command.

SCPI Syntax

- BUS:B<x>:AUTOETHERnet:DATAMINUSTHRESHOLD <NR3>
- BUS:B<x>:AUTOETHERnet:DATAMINUSTHRESHOLD?

Info

B<x> is the Bus number.
<NR3> specifies the AutoEthernet D- source threshold level for the specified bus, in volts. This threshold only applies when the AutoEthernet signal type is single ended.

dataplusthreshold `property` ¶

dataplusthreshold: BusBItemAutoethernetDataplusthreshold

Return the BUS:B<x>:AUTOETHERnet:DATAPLUSTHRESHold command.

Description

This command sets or queries the AutoEthernet D+ source threshold level for the specified bus. This threshold only applies when the AutoEthernet signal type is single ended.

Usage

Using the .query() method will send the BUS:B<x>:AUTOETHERnet:DATAPLUSTHRESHold? query.
Using the .verify(value) method will send the BUS:B<x>:AUTOETHERnet:DATAPLUSTHRESHold? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:AUTOETHERnet:DATAPLUSTHRESHold value command.

SCPI Syntax

- BUS:B<x>:AUTOETHERnet:DATAPLUSTHRESHold <NR3>
- BUS:B<x>:AUTOETHERnet:DATAPLUSTHRESHold?

Info

B<x> is the Bus number.
<NR3> specifies the AutoEthernet D+ source threshold for the specified bus, in volts. This threshold only applies when the AutoEthernet signal type is single ended.

lowdataminus `property` ¶

lowdataminus: BusBItemAutoethernetLowdataminus

Return the BUS:B<x>:AUTOETHERnet:LOWDATAMINus command.

Description

This command sets or queries the AutoEthernet D- source low threshold level for the specified bus. This threshold only applies when the AutoEthernet signal type is single ended.

Usage

Using the .query() method will send the BUS:B<x>:AUTOETHERnet:LOWDATAMINus? query.
Using the .verify(value) method will send the BUS:B<x>:AUTOETHERnet:LOWDATAMINus? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:AUTOETHERnet:LOWDATAMINus value command.

SCPI Syntax

- BUS:B<x>:AUTOETHERnet:LOWDATAMINus <NR3>
- BUS:B<x>:AUTOETHERnet:LOWDATAMINus?

Info

B<x> is the Bus number.
NR3 specifies the AutoEthernet D- source low threshold level for the specified bus, in volts. This threshold only applies when the AutoEthernet signal type is single ended.

lowdataplus `property` ¶

lowdataplus: BusBItemAutoethernetLowdataplus

Return the BUS:B<x>:AUTOETHERnet:LOWDATAPLUS command.

Description

This command sets or queries the AutoEthernet D+ source low threshold level for the specified bus. This threshold only applies when the AutoEthernet signal type is single ended.

Usage

Using the .query() method will send the BUS:B<x>:AUTOETHERnet:LOWDATAPLUS? query.
Using the .verify(value) method will send the BUS:B<x>:AUTOETHERnet:LOWDATAPLUS? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:AUTOETHERnet:LOWDATAPLUS value command.

SCPI Syntax

- BUS:B<x>:AUTOETHERnet:LOWDATAPLUS <NR3>
- BUS:B<x>:AUTOETHERnet:LOWDATAPLUS?

Info

B<x> is the Bus number.
NR3 specifies the AutoEthernet D+ source low threshold level for the specified bus, in volts. This threshold only applies when the AutoEthernet signal type is single ended.

lowthreshold `property` ¶

lowthreshold: BusBItemAutoethernetLowthreshold

Return the BUS:B<x>:AUTOETHERnet:LOWTHRESHold command.

Description

This command sets or queries the AutoEthernet Data source Low threshold level for the specified bus. This threshold only applies when the AutoEthernet signal type is differential.

Usage

Using the .query() method will send the BUS:B<x>:AUTOETHERnet:LOWTHRESHold? query.
Using the .verify(value) method will send the BUS:B<x>:AUTOETHERnet:LOWTHRESHold? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:AUTOETHERnet:LOWTHRESHold value command.

SCPI Syntax

- BUS:B<x>:AUTOETHERnet:LOWTHRESHold <NR3>
- BUS:B<x>:AUTOETHERnet:LOWTHRESHold?

Info

B<x> is the Bus number.
NR3 specifies the AutoEthernet DATA source Low threshold level for the specified bus, in volts. This threshold only applies when the AutoEthernet signal type is differential.

signaltype `property` ¶

signaltype: BusBItemAutoethernetSignaltype

Return the BUS:B<x>:AUTOETHERnet:SIGNALTYpe command.

Description

This command sets or queries the AutoEthernet signal type for the specified bus.

Usage

Using the .query() method will send the BUS:B<x>:AUTOETHERnet:SIGNALTYpe? query.
Using the .verify(value) method will send the BUS:B<x>:AUTOETHERnet:SIGNALTYpe? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:AUTOETHERnet:SIGNALTYpe value command.

SCPI Syntax

- BUS:B<x>:AUTOETHERnet:SIGNALTYpe {SINGLE|DIFF}
- BUS:B<x>:AUTOETHERnet:SIGNALTYpe?

Info

B<x> is the Bus number.
SINGLE specifies single-ended signals.
DIFF specifies differential signals.

source `property` ¶

source: BusBItemAutoethernetSource

Return the BUS:B<x>:AUTOETHERnet:SOUrce command.

Description

This command sets or queries the AutoEthernet data (SDATA) source for the specified bus. This command controls the source channel when the signal type is differential.

Usage

Using the .query() method will send the BUS:B<x>:AUTOETHERnet:SOUrce? query.
Using the .verify(value) method will send the BUS:B<x>:AUTOETHERnet:SOUrce? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:AUTOETHERnet:SOUrce value command.

SCPI Syntax

- BUS:B<x>:AUTOETHERnet:SOUrce {S<x>_Ch<x>|CH<x>|MATH<x>|REF<x<>}
- BUS:B<x>:AUTOETHERnet:SOUrce?

Info

Bus<x> is the Bus number.
CH<x> specifies an analog channel as the AutoEthernet data source for differential input, where is the channel number.
MATH<x> specifies a math channel as the AutoEthernet data source for differential input, where is the math waveform number.
REF<x> specifies a reference waveform as the AutoEthernet data source for differential input, where is the reference waveform number.
S<x>_Ch<x> specifies the remote scope number and the analog channel as the source.

Sub-properties

.dminus: The BUS:B<x>:AUTOETHERnet:SOUrce:DMINus command.
.dplus: The BUS:B<x>:AUTOETHERnet:SOUrce:DPLUs command.

threshold `property` ¶

threshold: BusBItemAutoethernetThreshold

Return the BUS:B<x>:AUTOETHERnet:THRESHold command.

Description

This command sets or queries the AutoEthernet DATA source High threshold level for the specified bus.

Usage

Using the .query() method will send the BUS:B<x>:AUTOETHERnet:THRESHold? query.
Using the .verify(value) method will send the BUS:B<x>:AUTOETHERnet:THRESHold? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:AUTOETHERnet:THRESHold value command.

SCPI Syntax

- BUS:B<x>:AUTOETHERnet:THRESHold <NR3>
- BUS:B<x>:AUTOETHERnet:THRESHold?

Info

B<x> is the Bus number.
NR3 specifies the AutoEthernet DATA source High threshold level for the specified bus, in volts.

type `property` ¶

type: BusBItemAutoethernetType

Return the BUS:B<x>:AUTOETHERnet:TYPe command.

Description

This command sets or queries the AutoEthernet standard speed.

Usage

Using the .query() method will send the BUS:B<x>:AUTOETHERnet:TYPe? query.
Using the .verify(value) method will send the BUS:B<x>:AUTOETHERnet:TYPe? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:AUTOETHERnet:TYPe value command.

SCPI Syntax

- BUS:B<x>:AUTOETHERnet:TYPe {HUNDREDBASET1}
- BUS:B<x>:AUTOETHERnet:TYPe?

Info

B<x> is the Bus number.
HUNDREDBASET1 specifies the AutoEthernet speed as 100Base-T1.

BusBItemAutoethernetDataminusthreshold ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:AUTOETHERnet:DATAMINUSTHRESHOLD command.

Description

This command sets or queries the AutoEthernet D- source threshold level for the specified bus. This threshold only applies when the AutoEthernet signal type is single ended.

Usage

Using the .query() method will send the BUS:B<x>:AUTOETHERnet:DATAMINUSTHRESHOLD? query.
Using the .verify(value) method will send the BUS:B<x>:AUTOETHERnet:DATAMINUSTHRESHOLD? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:AUTOETHERnet:DATAMINUSTHRESHOLD value command.

SCPI Syntax

- BUS:B<x>:AUTOETHERnet:DATAMINUSTHRESHOLD <NR3>
- BUS:B<x>:AUTOETHERnet:DATAMINUSTHRESHOLD?

Info

B<x> is the Bus number.
<NR3> specifies the AutoEthernet D- source threshold level for the specified bus, in volts. This threshold only applies when the AutoEthernet signal type is single ended.

BusBItemAutoethernetDataplusthreshold ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:AUTOETHERnet:DATAPLUSTHRESHold command.

Description

This command sets or queries the AutoEthernet D+ source threshold level for the specified bus. This threshold only applies when the AutoEthernet signal type is single ended.

Usage

Using the .query() method will send the BUS:B<x>:AUTOETHERnet:DATAPLUSTHRESHold? query.
Using the .verify(value) method will send the BUS:B<x>:AUTOETHERnet:DATAPLUSTHRESHold? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:AUTOETHERnet:DATAPLUSTHRESHold value command.

SCPI Syntax

- BUS:B<x>:AUTOETHERnet:DATAPLUSTHRESHold <NR3>
- BUS:B<x>:AUTOETHERnet:DATAPLUSTHRESHold?

Info

B<x> is the Bus number.
<NR3> specifies the AutoEthernet D+ source threshold for the specified bus, in volts. This threshold only applies when the AutoEthernet signal type is single ended.

BusBItemAutoethernetLowdataminus ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:AUTOETHERnet:LOWDATAMINus command.

Description

This command sets or queries the AutoEthernet D- source low threshold level for the specified bus. This threshold only applies when the AutoEthernet signal type is single ended.

Usage

Using the .query() method will send the BUS:B<x>:AUTOETHERnet:LOWDATAMINus? query.
Using the .verify(value) method will send the BUS:B<x>:AUTOETHERnet:LOWDATAMINus? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:AUTOETHERnet:LOWDATAMINus value command.

SCPI Syntax

- BUS:B<x>:AUTOETHERnet:LOWDATAMINus <NR3>
- BUS:B<x>:AUTOETHERnet:LOWDATAMINus?

Info

B<x> is the Bus number.
NR3 specifies the AutoEthernet D- source low threshold level for the specified bus, in volts. This threshold only applies when the AutoEthernet signal type is single ended.

BusBItemAutoethernetLowdataplus ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:AUTOETHERnet:LOWDATAPLUS command.

Description

This command sets or queries the AutoEthernet D+ source low threshold level for the specified bus. This threshold only applies when the AutoEthernet signal type is single ended.

Usage

Using the .query() method will send the BUS:B<x>:AUTOETHERnet:LOWDATAPLUS? query.
Using the .verify(value) method will send the BUS:B<x>:AUTOETHERnet:LOWDATAPLUS? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:AUTOETHERnet:LOWDATAPLUS value command.

SCPI Syntax

- BUS:B<x>:AUTOETHERnet:LOWDATAPLUS <NR3>
- BUS:B<x>:AUTOETHERnet:LOWDATAPLUS?

Info

B<x> is the Bus number.
NR3 specifies the AutoEthernet D+ source low threshold level for the specified bus, in volts. This threshold only applies when the AutoEthernet signal type is single ended.

BusBItemAutoethernetLowthreshold ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:AUTOETHERnet:LOWTHRESHold command.

Description

This command sets or queries the AutoEthernet Data source Low threshold level for the specified bus. This threshold only applies when the AutoEthernet signal type is differential.

Usage

Using the .query() method will send the BUS:B<x>:AUTOETHERnet:LOWTHRESHold? query.
Using the .verify(value) method will send the BUS:B<x>:AUTOETHERnet:LOWTHRESHold? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:AUTOETHERnet:LOWTHRESHold value command.

SCPI Syntax

- BUS:B<x>:AUTOETHERnet:LOWTHRESHold <NR3>
- BUS:B<x>:AUTOETHERnet:LOWTHRESHold?

Info

B<x> is the Bus number.
NR3 specifies the AutoEthernet DATA source Low threshold level for the specified bus, in volts. This threshold only applies when the AutoEthernet signal type is differential.

BusBItemAutoethernetSignaltype ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:AUTOETHERnet:SIGNALTYpe command.

Description

This command sets or queries the AutoEthernet signal type for the specified bus.

Usage

Using the .query() method will send the BUS:B<x>:AUTOETHERnet:SIGNALTYpe? query.
Using the .verify(value) method will send the BUS:B<x>:AUTOETHERnet:SIGNALTYpe? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:AUTOETHERnet:SIGNALTYpe value command.

SCPI Syntax

- BUS:B<x>:AUTOETHERnet:SIGNALTYpe {SINGLE|DIFF}
- BUS:B<x>:AUTOETHERnet:SIGNALTYpe?

Info

B<x> is the Bus number.
SINGLE specifies single-ended signals.
DIFF specifies differential signals.

BusBItemAutoethernetSource ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:AUTOETHERnet:SOUrce command.

Description

This command sets or queries the AutoEthernet data (SDATA) source for the specified bus. This command controls the source channel when the signal type is differential.

Usage

Using the .query() method will send the BUS:B<x>:AUTOETHERnet:SOUrce? query.
Using the .verify(value) method will send the BUS:B<x>:AUTOETHERnet:SOUrce? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:AUTOETHERnet:SOUrce value command.

SCPI Syntax

- BUS:B<x>:AUTOETHERnet:SOUrce {S<x>_Ch<x>|CH<x>|MATH<x>|REF<x<>}
- BUS:B<x>:AUTOETHERnet:SOUrce?

Info

Bus<x> is the Bus number.
CH<x> specifies an analog channel as the AutoEthernet data source for differential input, where is the channel number.
MATH<x> specifies a math channel as the AutoEthernet data source for differential input, where is the math waveform number.
REF<x> specifies a reference waveform as the AutoEthernet data source for differential input, where is the reference waveform number.
S<x>_Ch<x> specifies the remote scope number and the analog channel as the source.

Properties

.dminus: The BUS:B<x>:AUTOETHERnet:SOUrce:DMINus command.
.dplus: The BUS:B<x>:AUTOETHERnet:SOUrce:DPLUs command.

dminus `property` ¶

dminus: BusBItemAutoethernetSourceDminus

Return the BUS:B<x>:AUTOETHERnet:SOUrce:DMINus command.

Description

This command sets or queries the AutoEthernet D- source for the specified bus. This command specifies the source channel to use when the signal type is single ended.

Usage

Using the .query() method will send the BUS:B<x>:AUTOETHERnet:SOUrce:DMINus? query.
Using the .verify(value) method will send the BUS:B<x>:AUTOETHERnet:SOUrce:DMINus? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:AUTOETHERnet:SOUrce:DMINus value command.

SCPI Syntax

- BUS:B<x>:AUTOETHERnet:SOUrce:DMINus {S<x>_Ch<x>|CH<x>|MATH<x>|REF<x<>}
- BUS:B<x>:AUTOETHERnet:SOUrce:DMINus?

Info

Bus<x> is the Bus number.
S<x>_Ch<x> specifies the remote scope number and the analog channel.
CH<x> specifies an analog channel as the source for the D- signal, where is the channel number.
MATH<x> specifies a math channel as the source for the D- signal, where is the math waveform number.
REF<x> specifies a reference waveform as the source for the D- signal, where is the reference waveform number.

dplus `property` ¶

dplus: BusBItemAutoethernetSourceDplus

Return the BUS:B<x>:AUTOETHERnet:SOUrce:DPLUs command.

Description

This command sets or queries the AutoEthernet D+ source for the specified bus. This command specifies the source channel to use when the signal type is single ended.

Usage

Using the .query() method will send the BUS:B<x>:AUTOETHERnet:SOUrce:DPLUs? query.
Using the .verify(value) method will send the BUS:B<x>:AUTOETHERnet:SOUrce:DPLUs? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:AUTOETHERnet:SOUrce:DPLUs value command.

SCPI Syntax

- BUS:B<x>:AUTOETHERnet:SOUrce:DPLUs {S<x>_Ch<x>|CH<x>|MATH<x>|REF<x<>}
- BUS:B<x>:AUTOETHERnet:SOUrce:DPLUs?

Info

Bus<x> is the Bus number.
S<x>_Ch<x> specifies the remote scope number and the analog channel as the source.
CH<x> specifies an analog channel as the source for the D+ signal, where is the channel number.
MATH<x> specifies a math channel as the source for the D+ signal, where is the math waveform number.
REF<x> specifies a reference waveform as the source for the D+ signal, where is the reference waveform number.

BusBItemAutoethernetSourceDminus ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:AUTOETHERnet:SOUrce:DMINus command.

Description

This command sets or queries the AutoEthernet D- source for the specified bus. This command specifies the source channel to use when the signal type is single ended.

Usage

Using the .query() method will send the BUS:B<x>:AUTOETHERnet:SOUrce:DMINus? query.
Using the .verify(value) method will send the BUS:B<x>:AUTOETHERnet:SOUrce:DMINus? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:AUTOETHERnet:SOUrce:DMINus value command.

SCPI Syntax

- BUS:B<x>:AUTOETHERnet:SOUrce:DMINus {S<x>_Ch<x>|CH<x>|MATH<x>|REF<x<>}
- BUS:B<x>:AUTOETHERnet:SOUrce:DMINus?

Info

Bus<x> is the Bus number.
S<x>_Ch<x> specifies the remote scope number and the analog channel.
CH<x> specifies an analog channel as the source for the D- signal, where is the channel number.
MATH<x> specifies a math channel as the source for the D- signal, where is the math waveform number.
REF<x> specifies a reference waveform as the source for the D- signal, where is the reference waveform number.

BusBItemAutoethernetSourceDplus ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:AUTOETHERnet:SOUrce:DPLUs command.

Description

This command sets or queries the AutoEthernet D+ source for the specified bus. This command specifies the source channel to use when the signal type is single ended.

Usage

Using the .query() method will send the BUS:B<x>:AUTOETHERnet:SOUrce:DPLUs? query.
Using the .verify(value) method will send the BUS:B<x>:AUTOETHERnet:SOUrce:DPLUs? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:AUTOETHERnet:SOUrce:DPLUs value command.

SCPI Syntax

- BUS:B<x>:AUTOETHERnet:SOUrce:DPLUs {S<x>_Ch<x>|CH<x>|MATH<x>|REF<x<>}
- BUS:B<x>:AUTOETHERnet:SOUrce:DPLUs?

Info

Bus<x> is the Bus number.
S<x>_Ch<x> specifies the remote scope number and the analog channel as the source.
CH<x> specifies an analog channel as the source for the D+ signal, where is the channel number.
MATH<x> specifies a math channel as the source for the D+ signal, where is the math waveform number.
REF<x> specifies a reference waveform as the source for the D+ signal, where is the reference waveform number.

BusBItemAutoethernetThreshold ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:AUTOETHERnet:THRESHold command.

Description

This command sets or queries the AutoEthernet DATA source High threshold level for the specified bus.

Usage

Using the .query() method will send the BUS:B<x>:AUTOETHERnet:THRESHold? query.
Using the .verify(value) method will send the BUS:B<x>:AUTOETHERnet:THRESHold? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:AUTOETHERnet:THRESHold value command.

SCPI Syntax

- BUS:B<x>:AUTOETHERnet:THRESHold <NR3>
- BUS:B<x>:AUTOETHERnet:THRESHold?

Info

B<x> is the Bus number.
NR3 specifies the AutoEthernet DATA source High threshold level for the specified bus, in volts.

BusBItemAutoethernetType ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:AUTOETHERnet:TYPe command.

Description

This command sets or queries the AutoEthernet standard speed.

Usage

Using the .query() method will send the BUS:B<x>:AUTOETHERnet:TYPe? query.
Using the .verify(value) method will send the BUS:B<x>:AUTOETHERnet:TYPe? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:AUTOETHERnet:TYPe value command.

SCPI Syntax

- BUS:B<x>:AUTOETHERnet:TYPe {HUNDREDBASET1}
- BUS:B<x>:AUTOETHERnet:TYPe?

Info

B<x> is the Bus number.
HUNDREDBASET1 specifies the AutoEthernet speed as 100Base-T1.

BusBItemCan ¶

Bases: SCPICmdRead

The BUS:B<x>:CAN command tree.

Usage

Using the .query() method will send the BUS:B<x>:CAN? query.
Using the .verify(value) method will send the BUS:B<x>:CAN? query and raise an AssertionError if the returned value does not match value.

Info

B<x> is the number of the bus.

Properties

.bitrate: The BUS:B<x>:CAN:BITRate command.
.fd: The BUS:B<x>:CAN:FD command tree.
.samplepoint: The BUS:B<x>:CAN:SAMPLEpoint command.
.signal: The BUS:B<x>:CAN:SIGNal command.
.source: The BUS:B<x>:CAN:SOUrce command.
.standard: The BUS:B<x>:CAN:STANDard command.
.threshold: The BUS:B<x>:CAN:THReshold command.

bitrate `property` ¶

bitrate: BusBItemCanBitrate

Return the BUS:B<x>:CAN:BITRate command.

Description

This command sets or queries the CAN bit rate. The bus number is specified by x. If you select Custom, use BUS:BX:CAN:BITRATE:VALUE to set the bit rate.

Usage

Using the .query() method will send the BUS:B<x>:CAN:BITRate? query.
Using the .verify(value) method will send the BUS:B<x>:CAN:BITRate? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:CAN:BITRate value command.

SCPI Syntax

- BUS:B<x>:CAN:BITRate {RATE10K|RATE100K|RATE1M|RATE125K|RATE153K|RATE20K|RATE25K|RATE250K|RATE31K|RATE33K|RATE400K|RATE50K|RATE500K|RATE62K|RATE68K|RATE800K|RATE83K|RATE92K|CUSTom}
- BUS:B<x>:CAN:BITRate?

Info

B<x> is the number of the bus.

Sub-properties

.value: The BUS:B<x>:CAN:BITRate:VALue command.

fd `property` ¶

fd: BusBItemCanFd

Return the BUS:B<x>:CAN:FD command tree.

Usage

Using the .query() method will send the BUS:B<x>:CAN:FD? query.
Using the .verify(value) method will send the BUS:B<x>:CAN:FD? query and raise an AssertionError if the returned value does not match value.

Info

B<x> is the number of the bus.

Sub-properties

.bitrate: The BUS:B<x>:CAN:FD:BITRate command.

samplepoint `property` ¶

samplepoint: BusBItemCanSamplepoint

Return the BUS:B<x>:CAN:SAMPLEpoint command.

Description

This command sets or queries the sample point for the specified CAN bus. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:CAN:SAMPLEpoint? query.
Using the .verify(value) method will send the BUS:B<x>:CAN:SAMPLEpoint? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:CAN:SAMPLEpoint value command.

SCPI Syntax

- BUS:B<x>:CAN:SAMPLEpoint <NR1>
- BUS:B<x>:CAN:SAMPLEpoint?

Info

B<x> is the number of the bus.
<NR1> is the sample point, in percent, for the specified CAN bus.

signal `property` ¶

signal: BusBItemCanSignal

Return the BUS:B<x>:CAN:SIGNal command.

Description

This command sets or queries the signal type for the specified CAN bus. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:CAN:SIGNal? query.
Using the .verify(value) method will send the BUS:B<x>:CAN:SIGNal? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:CAN:SIGNal value command.

SCPI Syntax

- BUS:B<x>:CAN:SIGNal {DIFFerential|CANH|CANL|RX|TX}
- BUS:B<x>:CAN:SIGNal?

Info

B<x> is the number of the bus.

source `property` ¶

source: BusBItemCanSource

Return the BUS:B<x>:CAN:SOUrce command.

Description

This command sets or queries the CAN source channel for the specified CAN bus. The bus number is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:CAN:SOUrce? query.
Using the .verify(value) method will send the BUS:B<x>:CAN:SOUrce? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:CAN:SOUrce value command.

SCPI Syntax

- BUS:B<x>:CAN:SOUrce {S<x>_Ch<x>_D<x>|CH<x>|CH<x>_D<x>|MATH<x>|REF<x>|REF<x>_D<x>}
- BUS:B<x>:CAN:SOUrce?

Info

B<x> is the number of the bus.
S<x>_Ch<x>_D<x> specifies the remote scope number, the analog channel, and the digital channel.
CH<x>_D<x> specifies an analog channel and the digital channel as the source.
REF<x>_D<x> specifies a reference waveform and digital channel as the source.
CH<x> specifies an analog channel as the source.
Math<x> specifies a math waveform as the source.
REF<x> specifies a reference waveform as the source.

standard `property` ¶

standard: BusBItemCanStandard

Return the BUS:B<x>:CAN:STANDard command.

Description

This command sets or queries which CAN standard specification to analyze the specified CAN bus with. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:CAN:STANDard? query.
Using the .verify(value) method will send the BUS:B<x>:CAN:STANDard? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:CAN:STANDard value command.

SCPI Syntax

- BUS:B<x>:CAN:STANDard {CAN2X|FDISO|FDNONISO}
- BUS:B<x>:CAN:STANDard?

Info

B<x> is the number of the bus.
CAN2X sets the CAN bus standard to CAN 2.0.
FDISO sets the CAN bus standard to ISO CAN FD (11898-1:2015).
FDNONISO sets the CAN bus standard to non-ISO CAN FD (Bosch:2012).

threshold `property` ¶

threshold: BusBItemCanThreshold

Return the BUS:B<x>:CAN:THReshold command.

Description

This command sets or queries the source channel threshold for the specified CAN bus. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:CAN:THReshold? query.
Using the .verify(value) method will send the BUS:B<x>:CAN:THReshold? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:CAN:THReshold value command.

SCPI Syntax

- BUS:B<x>:CAN:THReshold <NR3>
- BUS:B<x>:CAN:THReshold?

Info

B<x> is the number of the bus.
<NR3> is the source channel threshold for the specified CAN bus.

BusBItemCanBitrate ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:CAN:BITRate command.

Description

This command sets or queries the CAN bit rate. The bus number is specified by x. If you select Custom, use BUS:BX:CAN:BITRATE:VALUE to set the bit rate.

Usage

Using the .query() method will send the BUS:B<x>:CAN:BITRate? query.
Using the .verify(value) method will send the BUS:B<x>:CAN:BITRate? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:CAN:BITRate value command.

SCPI Syntax

- BUS:B<x>:CAN:BITRate {RATE10K|RATE100K|RATE1M|RATE125K|RATE153K|RATE20K|RATE25K|RATE250K|RATE31K|RATE33K|RATE400K|RATE50K|RATE500K|RATE62K|RATE68K|RATE800K|RATE83K|RATE92K|CUSTom}
- BUS:B<x>:CAN:BITRate?

Info

B<x> is the number of the bus.

Properties

.value: The BUS:B<x>:CAN:BITRate:VALue command.

value `property` ¶

value: BusBItemCanBitrateValue

Return the BUS:B<x>:CAN:BITRate:VALue command.

Description

This command sets or queries CAN bit rate when Custom is selected by BUS:BX:CAN:BITRATE. The bus number is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:CAN:BITRate:VALue? query.
Using the .verify(value) method will send the BUS:B<x>:CAN:BITRate:VALue? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:CAN:BITRate:VALue value command.

SCPI Syntax

- BUS:B<x>:CAN:BITRate:VALue <NR3>
- BUS:B<x>:CAN:BITRate:VALue?

Info

B<x> is the number of the bus.
<NR3> specifies the CAN bit rate.

BusBItemCanBitrateValue ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:CAN:BITRate:VALue command.

Description

This command sets or queries CAN bit rate when Custom is selected by BUS:BX:CAN:BITRATE. The bus number is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:CAN:BITRate:VALue? query.
Using the .verify(value) method will send the BUS:B<x>:CAN:BITRate:VALue? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:CAN:BITRate:VALue value command.

SCPI Syntax

- BUS:B<x>:CAN:BITRate:VALue <NR3>
- BUS:B<x>:CAN:BITRate:VALue?

Info

B<x> is the number of the bus.
<NR3> specifies the CAN bit rate.

BusBItemCanFd ¶

Bases: SCPICmdRead

The BUS:B<x>:CAN:FD command tree.

Usage

Using the .query() method will send the BUS:B<x>:CAN:FD? query.
Using the .verify(value) method will send the BUS:B<x>:CAN:FD? query and raise an AssertionError if the returned value does not match value.

Info

B<x> is the number of the bus.

Properties

.bitrate: The BUS:B<x>:CAN:FD:BITRate command.

bitrate `property` ¶

bitrate: BusBItemCanFdBitrate

Return the BUS:B<x>:CAN:FD:BITRate command.

Description

This command sets or queries the increased data phase bit rate used by CAN FD packets on the specified CAN bus. The bus is specified by x. If you select Custom, use BUS:B<x>:CAN:FD:BITRate:CUSTom to set the bit rate.

Usage

Using the .query() method will send the BUS:B<x>:CAN:FD:BITRate? query.
Using the .verify(value) method will send the BUS:B<x>:CAN:FD:BITRate? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:CAN:FD:BITRate value command.

SCPI Syntax

- BUS:B<x>:CAN:FD:BITRate {RATE1M|RATE2M|RATE3M|RATE4M|RATE5M|RATE6M|RATE7M|RATE8M|RATE9M|RATE10M|RATE11M|RATE12M|RATE13M|RATE14M|RATE15M|RATE16M|CUSTom}
- BUS:B<x>:CAN:FD:BITRate?

Info

B<x> is the number of the bus.

Sub-properties

.custom: The BUS:B<x>:CAN:FD:BITRate:CUSTom command.

BusBItemCanFdBitrate ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:CAN:FD:BITRate command.

Description

This command sets or queries the increased data phase bit rate used by CAN FD packets on the specified CAN bus. The bus is specified by x. If you select Custom, use BUS:B<x>:CAN:FD:BITRate:CUSTom to set the bit rate.

Usage

Using the .query() method will send the BUS:B<x>:CAN:FD:BITRate? query.
Using the .verify(value) method will send the BUS:B<x>:CAN:FD:BITRate? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:CAN:FD:BITRate value command.

SCPI Syntax

- BUS:B<x>:CAN:FD:BITRate {RATE1M|RATE2M|RATE3M|RATE4M|RATE5M|RATE6M|RATE7M|RATE8M|RATE9M|RATE10M|RATE11M|RATE12M|RATE13M|RATE14M|RATE15M|RATE16M|CUSTom}
- BUS:B<x>:CAN:FD:BITRate?

Info

B<x> is the number of the bus.

Properties

.custom: The BUS:B<x>:CAN:FD:BITRate:CUSTom command.

custom `property` ¶

custom: BusBItemCanFdBitrateCustom

Return the BUS:B<x>:CAN:FD:BITRate:CUSTom command.

Description

This command sets or queries the custom bit rate for the increased data phase of CAN FD packets on the specified CAN bus. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:CAN:FD:BITRate:CUSTom? query.
Using the .verify(value) method will send the BUS:B<x>:CAN:FD:BITRate:CUSTom? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:CAN:FD:BITRate:CUSTom value command.

SCPI Syntax

- BUS:B<x>:CAN:FD:BITRate:CUSTom <NR1>
- BUS:B<x>:CAN:FD:BITRate:CUSTom?

Info

B<x> is the number of the bus.
<NR1> is the custom FD bit rate for the specified bus.

BusBItemCanFdBitrateCustom ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:CAN:FD:BITRate:CUSTom command.

Description

This command sets or queries the custom bit rate for the increased data phase of CAN FD packets on the specified CAN bus. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:CAN:FD:BITRate:CUSTom? query.
Using the .verify(value) method will send the BUS:B<x>:CAN:FD:BITRate:CUSTom? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:CAN:FD:BITRate:CUSTom value command.

SCPI Syntax

- BUS:B<x>:CAN:FD:BITRate:CUSTom <NR1>
- BUS:B<x>:CAN:FD:BITRate:CUSTom?

Info

B<x> is the number of the bus.
<NR1> is the custom FD bit rate for the specified bus.

BusBItemCanSamplepoint ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:CAN:SAMPLEpoint command.

Description

This command sets or queries the sample point for the specified CAN bus. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:CAN:SAMPLEpoint? query.
Using the .verify(value) method will send the BUS:B<x>:CAN:SAMPLEpoint? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:CAN:SAMPLEpoint value command.

SCPI Syntax

- BUS:B<x>:CAN:SAMPLEpoint <NR1>
- BUS:B<x>:CAN:SAMPLEpoint?

Info

B<x> is the number of the bus.
<NR1> is the sample point, in percent, for the specified CAN bus.

BusBItemCanSignal ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:CAN:SIGNal command.

Description

This command sets or queries the signal type for the specified CAN bus. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:CAN:SIGNal? query.
Using the .verify(value) method will send the BUS:B<x>:CAN:SIGNal? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:CAN:SIGNal value command.

SCPI Syntax

- BUS:B<x>:CAN:SIGNal {DIFFerential|CANH|CANL|RX|TX}
- BUS:B<x>:CAN:SIGNal?

Info

B<x> is the number of the bus.

BusBItemCanSource ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:CAN:SOUrce command.

Description

This command sets or queries the CAN source channel for the specified CAN bus. The bus number is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:CAN:SOUrce? query.
Using the .verify(value) method will send the BUS:B<x>:CAN:SOUrce? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:CAN:SOUrce value command.

SCPI Syntax

- BUS:B<x>:CAN:SOUrce {S<x>_Ch<x>_D<x>|CH<x>|CH<x>_D<x>|MATH<x>|REF<x>|REF<x>_D<x>}
- BUS:B<x>:CAN:SOUrce?

Info

B<x> is the number of the bus.
S<x>_Ch<x>_D<x> specifies the remote scope number, the analog channel, and the digital channel.
CH<x>_D<x> specifies an analog channel and the digital channel as the source.
REF<x>_D<x> specifies a reference waveform and digital channel as the source.
CH<x> specifies an analog channel as the source.
Math<x> specifies a math waveform as the source.
REF<x> specifies a reference waveform as the source.

BusBItemCanStandard ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:CAN:STANDard command.

Description

This command sets or queries which CAN standard specification to analyze the specified CAN bus with. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:CAN:STANDard? query.
Using the .verify(value) method will send the BUS:B<x>:CAN:STANDard? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:CAN:STANDard value command.

SCPI Syntax

- BUS:B<x>:CAN:STANDard {CAN2X|FDISO|FDNONISO}
- BUS:B<x>:CAN:STANDard?

Info

B<x> is the number of the bus.
CAN2X sets the CAN bus standard to CAN 2.0.
FDISO sets the CAN bus standard to ISO CAN FD (11898-1:2015).
FDNONISO sets the CAN bus standard to non-ISO CAN FD (Bosch:2012).

BusBItemCanThreshold ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:CAN:THReshold command.

Description

This command sets or queries the source channel threshold for the specified CAN bus. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:CAN:THReshold? query.
Using the .verify(value) method will send the BUS:B<x>:CAN:THReshold? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:CAN:THReshold value command.

SCPI Syntax

- BUS:B<x>:CAN:THReshold <NR3>
- BUS:B<x>:CAN:THReshold?

Info

B<x> is the number of the bus.
<NR3> is the source channel threshold for the specified CAN bus.

BusBItemCphy ¶

Bases: SCPICmdRead

The BUS:B<x>:CPHY command tree.

Usage

Using the .query() method will send the BUS:B<x>:CPHY? query.
Using the .verify(value) method will send the BUS:B<x>:CPHY? query and raise an AssertionError if the returned value does not match value.

Info

B<x> is the number of the bus.

Properties

.a: The BUS:B<x>:CPHY:A command tree.
.ab: The BUS:B<x>:CPHY:AB command tree.
.agnd: The BUS:B<x>:CPHY:AGND command tree.
.b: The BUS:B<x>:CPHY:B command tree.
.bc: The BUS:B<x>:CPHY:BC command tree.
.bitrate: The BUS:B<x>:CPHY:BITRate command.
.c: The BUS:B<x>:CPHY:C command tree.
.ca: The BUS:B<x>:CPHY:CA command tree.
.cgnd: The BUS:B<x>:CPHY:CGND command tree.
.lp: The BUS:B<x>:CPHY:LP command tree.
.signaltype: The BUS:B<x>:CPHY:SIGNALTYpe command.
.subtype: The BUS:B<x>:CPHY:SUBTYPe command.

a `property` ¶

a: BusBItemCphyA

Return the BUS:B<x>:CPHY:A command tree.

Usage

Using the .query() method will send the BUS:B<x>:CPHY:A? query.
Using the .verify(value) method will send the BUS:B<x>:CPHY:A? query and raise an AssertionError if the returned value does not match value.

Info

B<x> is the number of the bus.

Sub-properties

.data: The BUS:B<x>:CPHY:A:DATA command tree.
.lp: The BUS:B<x>:CPHY:A:LP command tree.
.source: The BUS:B<x>:CPHY:A:SOUrce command.

ab `property` ¶

ab: BusBItemCphyAb

Return the BUS:B<x>:CPHY:AB command tree.

Usage

Using the .query() method will send the BUS:B<x>:CPHY:AB? query.
Using the .verify(value) method will send the BUS:B<x>:CPHY:AB? query and raise an AssertionError if the returned value does not match value.

Info

B<x> is the number of the bus.

Sub-properties

.source: The BUS:B<x>:CPHY:AB:SOUrce command.
.threshold: The BUS:B<x>:CPHY:AB:THReshold command.

agnd `property` ¶

agnd: BusBItemCphyAgnd

Return the BUS:B<x>:CPHY:AGND command tree.

Usage

Using the .query() method will send the BUS:B<x>:CPHY:AGND? query.
Using the .verify(value) method will send the BUS:B<x>:CPHY:AGND? query and raise an AssertionError if the returned value does not match value.

Info

B<x> is the number of the bus.

Sub-properties

.source: The BUS:B<x>:CPHY:AGND:SOUrce command.
.threshold: The BUS:B<x>:CPHY:AGND:THReshold command.

b `property` ¶

b: BusBItemCphyB

Return the BUS:B<x>:CPHY:B command tree.

Usage

Using the .query() method will send the BUS:B<x>:CPHY:B? query.
Using the .verify(value) method will send the BUS:B<x>:CPHY:B? query and raise an AssertionError if the returned value does not match value.

Info

B<x> is the number of the bus.

Sub-properties

.data: The BUS:B<x>:CPHY:B:DATA command tree.
.source: The BUS:B<x>:CPHY:B:SOUrce command.

bc `property` ¶

bc: BusBItemCphyBc

Return the BUS:B<x>:CPHY:BC command tree.

Usage

Using the .query() method will send the BUS:B<x>:CPHY:BC? query.
Using the .verify(value) method will send the BUS:B<x>:CPHY:BC? query and raise an AssertionError if the returned value does not match value.

Info

B<x> is the number of the bus.

Sub-properties

.source: The BUS:B<x>:CPHY:BC:SOUrce command.
.threshold: The BUS:B<x>:CPHY:BC:THReshold command.

bitrate `property` ¶

bitrate: BusBItemCphyBitrate

Return the BUS:B<x>:CPHY:BITRate command.

Description

This command sets or queries the bit rate for the specified CPHY bus. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:CPHY:BITRate? query.
Using the .verify(value) method will send the BUS:B<x>:CPHY:BITRate? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:CPHY:BITRate value command.

SCPI Syntax

- BUS:B<x>:CPHY:BITRate <NR1>
- BUS:B<x>:CPHY:BITRate?

Info

B<x> is the number of the bus.
<NR1> specifies the bit rate. The default bit rate is 1 Gbps and varies 4 Mbps ~ 10Gps.

c `property` ¶

c: BusBItemCphyC

Return the BUS:B<x>:CPHY:C command tree.

Usage

Using the .query() method will send the BUS:B<x>:CPHY:C? query.
Using the .verify(value) method will send the BUS:B<x>:CPHY:C? query and raise an AssertionError if the returned value does not match value.

Info

B<x> is the number of the bus.

Sub-properties

.data: The BUS:B<x>:CPHY:C:DATA command tree.
.lp: The BUS:B<x>:CPHY:C:LP command tree.
.source: The BUS:B<x>:CPHY:C:SOUrce command.

ca `property` ¶

ca: BusBItemCphyCa

Return the BUS:B<x>:CPHY:CA command tree.

Usage

Using the .query() method will send the BUS:B<x>:CPHY:CA? query.
Using the .verify(value) method will send the BUS:B<x>:CPHY:CA? query and raise an AssertionError if the returned value does not match value.

Info

B<x> is the number of the bus.

Sub-properties

.source: The BUS:B<x>:CPHY:CA:SOUrce command.
.threshold: The BUS:B<x>:CPHY:CA:THReshold command.

cgnd `property` ¶

cgnd: BusBItemCphyCgnd

Return the BUS:B<x>:CPHY:CGND command tree.

Usage

Using the .query() method will send the BUS:B<x>:CPHY:CGND? query.
Using the .verify(value) method will send the BUS:B<x>:CPHY:CGND? query and raise an AssertionError if the returned value does not match value.

Info

B<x> is the number of the bus.

Sub-properties

.source: The BUS:B<x>:CPHY:CGND:SOUrce command.
.threshold: The BUS:B<x>:CPHY:CGND:THReshold command.

lp `property` ¶

lp: BusBItemCphyLp

Return the BUS:B<x>:CPHY:LP command tree.

Usage

Using the .query() method will send the BUS:B<x>:CPHY:LP? query.
Using the .verify(value) method will send the BUS:B<x>:CPHY:LP? query and raise an AssertionError if the returned value does not match value.

Info

B<x> is the number of the bus.

Sub-properties

.direction: The BUS:B<x>:CPHY:LP:DIRection command.

signaltype `property` ¶

signaltype: BusBItemCphySignaltype

Return the BUS:B<x>:CPHY:SIGNALTYpe command.

Description

This command sets or queries the signal type for CPHY bus decode. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:CPHY:SIGNALTYpe? query.
Using the .verify(value) method will send the BUS:B<x>:CPHY:SIGNALTYpe? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:CPHY:SIGNALTYpe value command.

SCPI Syntax

- BUS:B<x>:CPHY:SIGNALTYpe {SINGLE|DIFF}
- BUS:B<x>:CPHY:SIGNALTYpe?

Info

B<x> is the number of the bus.
SINGLE specifies the signal type to single ended.
DIFF specifies the signal type to differential. The default type is differential.

subtype `property` ¶

subtype: BusBItemCphySubtype

Return the BUS:B<x>:CPHY:SUBTYPe command.

Description

This command sets or queries the sub type for CPHY bus decode. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:CPHY:SUBTYPe? query.
Using the .verify(value) method will send the BUS:B<x>:CPHY:SUBTYPe? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:CPHY:SUBTYPe value command.

SCPI Syntax

- BUS:B<x>:CPHY:SUBTYPe {CSI|DSI|Word|Symbol}
- BUS:B<x>:CPHY:SUBTYPe?

Info

B<x> is the number of the bus.
CSI specifies the protocol type to CSI. The default type is CSI.
DSI specifies the protocol type to DSI.
Word specifies the protocol type to word.
Symbol specifies the protocol type to symbol.

BusBItemCphyA ¶

Bases: SCPICmdRead

The BUS:B<x>:CPHY:A command tree.

Usage

Using the .query() method will send the BUS:B<x>:CPHY:A? query.
Using the .verify(value) method will send the BUS:B<x>:CPHY:A? query and raise an AssertionError if the returned value does not match value.

Info

B<x> is the number of the bus.

Properties

.data: The BUS:B<x>:CPHY:A:DATA command tree.
.lp: The BUS:B<x>:CPHY:A:LP command tree.
.source: The BUS:B<x>:CPHY:A:SOUrce command.

data `property` ¶

data: BusBItemCphyAData

Return the BUS:B<x>:CPHY:A:DATA command tree.

Usage

Using the .query() method will send the BUS:B<x>:CPHY:A:DATA? query.
Using the .verify(value) method will send the BUS:B<x>:CPHY:A:DATA? query and raise an AssertionError if the returned value does not match value.

Info

B<x> is the number of the bus.

Sub-properties

.threshold: The BUS:B<x>:CPHY:A:DATA:THRESHold command.

lp `property` ¶

lp: BusBItemCphyALp

Return the BUS:B<x>:CPHY:A:LP command tree.

Usage

Using the .query() method will send the BUS:B<x>:CPHY:A:LP? query.
Using the .verify(value) method will send the BUS:B<x>:CPHY:A:LP? query and raise an AssertionError if the returned value does not match value.

Info

B<x> is the number of the bus.

Sub-properties

.threshold: The BUS:B<x>:CPHY:A:LP:THRESHold command.

source `property` ¶

source: BusBItemCphyASource

Return the BUS:B<x>:CPHY:A:SOUrce command.

Description

This command sets or queries the CPHY Single Ended A source for the specified bus line. The bus number is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:CPHY:A:SOUrce? query.
Using the .verify(value) method will send the BUS:B<x>:CPHY:A:SOUrce? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:CPHY:A:SOUrce value command.

SCPI Syntax

- BUS:B<x>:CPHY:A:SOUrce {S<x>_Ch<x>|CH<x>|MATH<x>|REF<x>}
- BUS:B<x>:CPHY:A:SOUrce?

Info

B<x> is the number of the bus.
S<x>_Ch<x> specifies the remote scope number and the analog channel.
CH<x> specifies an analog channel as the source.
MATH<x> specifies a math channel as the source.
REF<x> specifies an analog reference waveform as the source.

BusBItemCphyAData ¶

Bases: SCPICmdRead

The BUS:B<x>:CPHY:A:DATA command tree.

Usage

Using the .query() method will send the BUS:B<x>:CPHY:A:DATA? query.
Using the .verify(value) method will send the BUS:B<x>:CPHY:A:DATA? query and raise an AssertionError if the returned value does not match value.

Info

B<x> is the number of the bus.

Properties

.threshold: The BUS:B<x>:CPHY:A:DATA:THRESHold command.

threshold `property` ¶

threshold: BusBItemCphyADataThreshold

Return the BUS:B<x>:CPHY:A:DATA:THRESHold command.

Description

This command sets or queries the CPHY Single Ended A source threshold for the specified bus. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:CPHY:A:DATA:THRESHold? query.
Using the .verify(value) method will send the BUS:B<x>:CPHY:A:DATA:THRESHold? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:CPHY:A:DATA:THRESHold value command.

SCPI Syntax

- BUS:B<x>:CPHY:A:DATA:THRESHold <NR3>
- BUS:B<x>:CPHY:A:DATA:THRESHold?

Info

B<x> is the number of the bus.
<NR3> is the CPHY Single Ended A threshold in Volts for the specified bus. The argument range is -8 V to +8 V.

BusBItemCphyADataThreshold ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:CPHY:A:DATA:THRESHold command.

Description

This command sets or queries the CPHY Single Ended A source threshold for the specified bus. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:CPHY:A:DATA:THRESHold? query.
Using the .verify(value) method will send the BUS:B<x>:CPHY:A:DATA:THRESHold? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:CPHY:A:DATA:THRESHold value command.

SCPI Syntax

- BUS:B<x>:CPHY:A:DATA:THRESHold <NR3>
- BUS:B<x>:CPHY:A:DATA:THRESHold?

Info

B<x> is the number of the bus.
<NR3> is the CPHY Single Ended A threshold in Volts for the specified bus. The argument range is -8 V to +8 V.

BusBItemCphyALp ¶

Bases: SCPICmdRead

The BUS:B<x>:CPHY:A:LP command tree.

Usage

Using the .query() method will send the BUS:B<x>:CPHY:A:LP? query.
Using the .verify(value) method will send the BUS:B<x>:CPHY:A:LP? query and raise an AssertionError if the returned value does not match value.

Info

B<x> is the number of the bus.

Properties

.threshold: The BUS:B<x>:CPHY:A:LP:THRESHold command.

threshold `property` ¶

threshold: BusBItemCphyALpThreshold

Return the BUS:B<x>:CPHY:A:LP:THRESHold command.

Description

This command sets or queries the CPHY Single Ended A LP threshold for the specified bus. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:CPHY:A:LP:THRESHold? query.
Using the .verify(value) method will send the BUS:B<x>:CPHY:A:LP:THRESHold? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:CPHY:A:LP:THRESHold value command.

SCPI Syntax

- BUS:B<x>:CPHY:A:LP:THRESHold <NR3>
- BUS:B<x>:CPHY:A:LP:THRESHold?

Info

B<x> is the number of the bus.
<NR3> is the CPHY Single Ended A LP threshold in Volts for the specified bus. The argument range is -8 V to +8 V.

BusBItemCphyALpThreshold ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:CPHY:A:LP:THRESHold command.

Description

This command sets or queries the CPHY Single Ended A LP threshold for the specified bus. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:CPHY:A:LP:THRESHold? query.
Using the .verify(value) method will send the BUS:B<x>:CPHY:A:LP:THRESHold? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:CPHY:A:LP:THRESHold value command.

SCPI Syntax

- BUS:B<x>:CPHY:A:LP:THRESHold <NR3>
- BUS:B<x>:CPHY:A:LP:THRESHold?

Info

B<x> is the number of the bus.
<NR3> is the CPHY Single Ended A LP threshold in Volts for the specified bus. The argument range is -8 V to +8 V.

BusBItemCphyASource ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:CPHY:A:SOUrce command.

Description

This command sets or queries the CPHY Single Ended A source for the specified bus line. The bus number is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:CPHY:A:SOUrce? query.
Using the .verify(value) method will send the BUS:B<x>:CPHY:A:SOUrce? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:CPHY:A:SOUrce value command.

SCPI Syntax

- BUS:B<x>:CPHY:A:SOUrce {S<x>_Ch<x>|CH<x>|MATH<x>|REF<x>}
- BUS:B<x>:CPHY:A:SOUrce?

Info

B<x> is the number of the bus.
S<x>_Ch<x> specifies the remote scope number and the analog channel.
CH<x> specifies an analog channel as the source.
MATH<x> specifies a math channel as the source.
REF<x> specifies an analog reference waveform as the source.

BusBItemCphyAb ¶

Bases: SCPICmdRead

The BUS:B<x>:CPHY:AB command tree.

Usage

Using the .query() method will send the BUS:B<x>:CPHY:AB? query.
Using the .verify(value) method will send the BUS:B<x>:CPHY:AB? query and raise an AssertionError if the returned value does not match value.

Info

B<x> is the number of the bus.

Properties

.source: The BUS:B<x>:CPHY:AB:SOUrce command.
.threshold: The BUS:B<x>:CPHY:AB:THReshold command.

source `property` ¶

source: BusBItemCphyAbSource

Return the BUS:B<x>:CPHY:AB:SOUrce command.

Description

This command sets or queries the CPHY differential AB source for the specified bus line. The bus number is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:CPHY:AB:SOUrce? query.
Using the .verify(value) method will send the BUS:B<x>:CPHY:AB:SOUrce? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:CPHY:AB:SOUrce value command.

SCPI Syntax

- BUS:B<x>:CPHY:AB:SOUrce {S<x>_Ch<x>|CH<x>|MATH<x>|REF<x>}
- BUS:B<x>:CPHY:AB:SOUrce?

Info

B<x> is the number of the bus.
S<x>_Ch<x> specifies the remote scope number and the analog channel.
CH<x> specifies an analog/digital channel as the source.
MATH<x> specifies a math channel as the source.
REF<x> specifies an analog/digital reference waveform as the source.

threshold `property` ¶

threshold: BusBItemCphyAbThreshold

Return the BUS:B<x>:CPHY:AB:THReshold command.

Description

This command sets or queries the CPHY differential AB source threshold for the specified bus. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:CPHY:AB:THReshold? query.
Using the .verify(value) method will send the BUS:B<x>:CPHY:AB:THReshold? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:CPHY:AB:THReshold value command.

SCPI Syntax

- BUS:B<x>:CPHY:AB:THReshold <NR3>
- BUS:B<x>:CPHY:AB:THReshold?

Info

B<x> is the number of the bus.
<NR3> is the CPHY differential AB threshold for the specified bus. The argument range is -8 V to +8 V.

BusBItemCphyAbSource ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:CPHY:AB:SOUrce command.

Description

This command sets or queries the CPHY differential AB source for the specified bus line. The bus number is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:CPHY:AB:SOUrce? query.
Using the .verify(value) method will send the BUS:B<x>:CPHY:AB:SOUrce? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:CPHY:AB:SOUrce value command.

SCPI Syntax

- BUS:B<x>:CPHY:AB:SOUrce {S<x>_Ch<x>|CH<x>|MATH<x>|REF<x>}
- BUS:B<x>:CPHY:AB:SOUrce?

Info

B<x> is the number of the bus.
S<x>_Ch<x> specifies the remote scope number and the analog channel.
CH<x> specifies an analog/digital channel as the source.
MATH<x> specifies a math channel as the source.
REF<x> specifies an analog/digital reference waveform as the source.

BusBItemCphyAbThreshold ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:CPHY:AB:THReshold command.

Description

This command sets or queries the CPHY differential AB source threshold for the specified bus. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:CPHY:AB:THReshold? query.
Using the .verify(value) method will send the BUS:B<x>:CPHY:AB:THReshold? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:CPHY:AB:THReshold value command.

SCPI Syntax

- BUS:B<x>:CPHY:AB:THReshold <NR3>
- BUS:B<x>:CPHY:AB:THReshold?

Info

B<x> is the number of the bus.
<NR3> is the CPHY differential AB threshold for the specified bus. The argument range is -8 V to +8 V.

BusBItemCphyAgnd ¶

Bases: SCPICmdRead

The BUS:B<x>:CPHY:AGND command tree.

Usage

Using the .query() method will send the BUS:B<x>:CPHY:AGND? query.
Using the .verify(value) method will send the BUS:B<x>:CPHY:AGND? query and raise an AssertionError if the returned value does not match value.

Info

B<x> is the number of the bus.

Properties

.source: The BUS:B<x>:CPHY:AGND:SOUrce command.
.threshold: The BUS:B<x>:CPHY:AGND:THReshold command.

source `property` ¶

source: BusBItemCphyAgndSource

Return the BUS:B<x>:CPHY:AGND:SOUrce command.

Description

This command sets or queries the CPHY differential AGND source for the specified bus line. The bus number is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:CPHY:AGND:SOUrce? query.
Using the .verify(value) method will send the BUS:B<x>:CPHY:AGND:SOUrce? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:CPHY:AGND:SOUrce value command.

SCPI Syntax

- BUS:B<x>:CPHY:AGND:SOUrce {S<x>_Ch<x>|CH<x>|MATH<x>|REF<x>}
- BUS:B<x>:CPHY:AGND:SOUrce?

Info

B<x> is the number of the bus.
S<x>_Ch<x> specifies the remote scope number and the analog channel.
CH<x> specifies an analog/digital channel as the source.
MATH<x> specifies a math channel as the source.
REF<x> specifies an analog/digital reference waveform as the source.

threshold `property` ¶

threshold: BusBItemCphyAgndThreshold

Return the BUS:B<x>:CPHY:AGND:THReshold command.

Description

This command sets or queries the CPHY differential AGND source threshold for the specified bus. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:CPHY:AGND:THReshold? query.
Using the .verify(value) method will send the BUS:B<x>:CPHY:AGND:THReshold? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:CPHY:AGND:THReshold value command.

SCPI Syntax

- BUS:B<x>:CPHY:AGND:THReshold <NR3>
- BUS:B<x>:CPHY:AGND:THReshold?

Info

B<x> is the number of the bus.
<NR3> is the CPHY differential A GND threshold for the specified bus. The argument range is -8 V to +8 V.

BusBItemCphyAgndSource ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:CPHY:AGND:SOUrce command.

Description

This command sets or queries the CPHY differential AGND source for the specified bus line. The bus number is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:CPHY:AGND:SOUrce? query.
Using the .verify(value) method will send the BUS:B<x>:CPHY:AGND:SOUrce? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:CPHY:AGND:SOUrce value command.

SCPI Syntax

- BUS:B<x>:CPHY:AGND:SOUrce {S<x>_Ch<x>|CH<x>|MATH<x>|REF<x>}
- BUS:B<x>:CPHY:AGND:SOUrce?

Info

B<x> is the number of the bus.
S<x>_Ch<x> specifies the remote scope number and the analog channel.
CH<x> specifies an analog/digital channel as the source.
MATH<x> specifies a math channel as the source.
REF<x> specifies an analog/digital reference waveform as the source.

BusBItemCphyAgndThreshold ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:CPHY:AGND:THReshold command.

Description

This command sets or queries the CPHY differential AGND source threshold for the specified bus. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:CPHY:AGND:THReshold? query.
Using the .verify(value) method will send the BUS:B<x>:CPHY:AGND:THReshold? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:CPHY:AGND:THReshold value command.

SCPI Syntax

- BUS:B<x>:CPHY:AGND:THReshold <NR3>
- BUS:B<x>:CPHY:AGND:THReshold?

Info

B<x> is the number of the bus.
<NR3> is the CPHY differential A GND threshold for the specified bus. The argument range is -8 V to +8 V.

BusBItemCphyB ¶

Bases: SCPICmdRead

The BUS:B<x>:CPHY:B command tree.

Usage

Using the .query() method will send the BUS:B<x>:CPHY:B? query.
Using the .verify(value) method will send the BUS:B<x>:CPHY:B? query and raise an AssertionError if the returned value does not match value.

Info

B<x> is the number of the bus.

Properties

.data: The BUS:B<x>:CPHY:B:DATA command tree.
.source: The BUS:B<x>:CPHY:B:SOUrce command.

data `property` ¶

data: BusBItemCphyBData

Return the BUS:B<x>:CPHY:B:DATA command tree.

Usage

Using the .query() method will send the BUS:B<x>:CPHY:B:DATA? query.
Using the .verify(value) method will send the BUS:B<x>:CPHY:B:DATA? query and raise an AssertionError if the returned value does not match value.

Info

B<x> is the number of the bus.

Sub-properties

.threshold: The BUS:B<x>:CPHY:B:DATA:THRESHold command.

source `property` ¶

source: BusBItemCphyBSource

Return the BUS:B<x>:CPHY:B:SOUrce command.

Description

This command sets or queries the CPHY Single Ended B source for the specified bus line. The bus number is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:CPHY:B:SOUrce? query.
Using the .verify(value) method will send the BUS:B<x>:CPHY:B:SOUrce? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:CPHY:B:SOUrce value command.

SCPI Syntax

- BUS:B<x>:CPHY:B:SOUrce {S<x>_Ch<x>|CH<x>|MATH<x>|REF<x>}
- BUS:B<x>:CPHY:B:SOUrce?

Info

B<x> is the number of the bus.
S<x>_Ch<x> specifies the remote scope number and the analog channel.
CH<x> specifies an analog channel as the source.
MATH<x> specifies a math channel as the source.
REF<x> specifies an analog reference waveform as the source.

BusBItemCphyBData ¶

Bases: SCPICmdRead

The BUS:B<x>:CPHY:B:DATA command tree.

Usage

Using the .query() method will send the BUS:B<x>:CPHY:B:DATA? query.
Using the .verify(value) method will send the BUS:B<x>:CPHY:B:DATA? query and raise an AssertionError if the returned value does not match value.

Info

B<x> is the number of the bus.

Properties

.threshold: The BUS:B<x>:CPHY:B:DATA:THRESHold command.

threshold `property` ¶

threshold: BusBItemCphyBDataThreshold

Return the BUS:B<x>:CPHY:B:DATA:THRESHold command.

Description

This command sets or queries the CPHY Single Ended B source threshold for the specified bus. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:CPHY:B:DATA:THRESHold? query.
Using the .verify(value) method will send the BUS:B<x>:CPHY:B:DATA:THRESHold? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:CPHY:B:DATA:THRESHold value command.

SCPI Syntax

- BUS:B<x>:CPHY:B:DATA:THRESHold <NR3>
- BUS:B<x>:CPHY:B:DATA:THRESHold?

Info

B<x> is the number of the bus.
<NR3> is the CPHY Single Ended B threshold for the specified bus. The argument range is -8 V to +8 V.

BusBItemCphyBDataThreshold ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:CPHY:B:DATA:THRESHold command.

Description

This command sets or queries the CPHY Single Ended B source threshold for the specified bus. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:CPHY:B:DATA:THRESHold? query.
Using the .verify(value) method will send the BUS:B<x>:CPHY:B:DATA:THRESHold? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:CPHY:B:DATA:THRESHold value command.

SCPI Syntax

- BUS:B<x>:CPHY:B:DATA:THRESHold <NR3>
- BUS:B<x>:CPHY:B:DATA:THRESHold?

Info

B<x> is the number of the bus.
<NR3> is the CPHY Single Ended B threshold for the specified bus. The argument range is -8 V to +8 V.

BusBItemCphyBSource ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:CPHY:B:SOUrce command.

Description

This command sets or queries the CPHY Single Ended B source for the specified bus line. The bus number is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:CPHY:B:SOUrce? query.
Using the .verify(value) method will send the BUS:B<x>:CPHY:B:SOUrce? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:CPHY:B:SOUrce value command.

SCPI Syntax

- BUS:B<x>:CPHY:B:SOUrce {S<x>_Ch<x>|CH<x>|MATH<x>|REF<x>}
- BUS:B<x>:CPHY:B:SOUrce?

Info

B<x> is the number of the bus.
S<x>_Ch<x> specifies the remote scope number and the analog channel.
CH<x> specifies an analog channel as the source.
MATH<x> specifies a math channel as the source.
REF<x> specifies an analog reference waveform as the source.

BusBItemCphyBc ¶

Bases: SCPICmdRead

The BUS:B<x>:CPHY:BC command tree.

Usage

Using the .query() method will send the BUS:B<x>:CPHY:BC? query.
Using the .verify(value) method will send the BUS:B<x>:CPHY:BC? query and raise an AssertionError if the returned value does not match value.

Info

B<x> is the number of the bus.

Properties

.source: The BUS:B<x>:CPHY:BC:SOUrce command.
.threshold: The BUS:B<x>:CPHY:BC:THReshold command.

source `property` ¶

source: BusBItemCphyBcSource

Return the BUS:B<x>:CPHY:BC:SOUrce command.

Description

This command sets or queries the CPHY differential BC source for the specified bus line. The bus number is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:CPHY:BC:SOUrce? query.
Using the .verify(value) method will send the BUS:B<x>:CPHY:BC:SOUrce? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:CPHY:BC:SOUrce value command.

SCPI Syntax

- BUS:B<x>:CPHY:BC:SOUrce {S<x>_Ch<x>|CH<x>|MATH<x>|REF<x>}
- BUS:B<x>:CPHY:BC:SOUrce?

Info

B<x> is the number of the bus.
S<x>_Ch<x> specifies the remote scope number and the analog channel.
CH<x> specifies an analog/digital channel as the source.
MATH<x> specifies a math channel as the source.
REF<x> specifies an analog/digital reference waveform as the source.

threshold `property` ¶

threshold: BusBItemCphyBcThreshold

Return the BUS:B<x>:CPHY:BC:THReshold command.

Description

This command sets or queries the CPHY differential BC source threshold for the specified bus. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:CPHY:BC:THReshold? query.
Using the .verify(value) method will send the BUS:B<x>:CPHY:BC:THReshold? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:CPHY:BC:THReshold value command.

SCPI Syntax

- BUS:B<x>:CPHY:BC:THReshold <NR3>
- BUS:B<x>:CPHY:BC:THReshold?

Info

B<x> is the number of the bus.
<NR3> is the CPHY differential BC threshold for the specified bus. The argument range is -8 V to +8 V.

BusBItemCphyBcSource ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:CPHY:BC:SOUrce command.

Description

This command sets or queries the CPHY differential BC source for the specified bus line. The bus number is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:CPHY:BC:SOUrce? query.
Using the .verify(value) method will send the BUS:B<x>:CPHY:BC:SOUrce? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:CPHY:BC:SOUrce value command.

SCPI Syntax

- BUS:B<x>:CPHY:BC:SOUrce {S<x>_Ch<x>|CH<x>|MATH<x>|REF<x>}
- BUS:B<x>:CPHY:BC:SOUrce?

Info

B<x> is the number of the bus.
S<x>_Ch<x> specifies the remote scope number and the analog channel.
CH<x> specifies an analog/digital channel as the source.
MATH<x> specifies a math channel as the source.
REF<x> specifies an analog/digital reference waveform as the source.

BusBItemCphyBcThreshold ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:CPHY:BC:THReshold command.

Description

This command sets or queries the CPHY differential BC source threshold for the specified bus. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:CPHY:BC:THReshold? query.
Using the .verify(value) method will send the BUS:B<x>:CPHY:BC:THReshold? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:CPHY:BC:THReshold value command.

SCPI Syntax

- BUS:B<x>:CPHY:BC:THReshold <NR3>
- BUS:B<x>:CPHY:BC:THReshold?

Info

B<x> is the number of the bus.
<NR3> is the CPHY differential BC threshold for the specified bus. The argument range is -8 V to +8 V.

BusBItemCphyBitrate ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:CPHY:BITRate command.

Description

This command sets or queries the bit rate for the specified CPHY bus. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:CPHY:BITRate? query.
Using the .verify(value) method will send the BUS:B<x>:CPHY:BITRate? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:CPHY:BITRate value command.

SCPI Syntax

- BUS:B<x>:CPHY:BITRate <NR1>
- BUS:B<x>:CPHY:BITRate?

Info

B<x> is the number of the bus.
<NR1> specifies the bit rate. The default bit rate is 1 Gbps and varies 4 Mbps ~ 10Gps.

BusBItemCphyC ¶

Bases: SCPICmdRead

The BUS:B<x>:CPHY:C command tree.

Usage

Using the .query() method will send the BUS:B<x>:CPHY:C? query.
Using the .verify(value) method will send the BUS:B<x>:CPHY:C? query and raise an AssertionError if the returned value does not match value.

Info

B<x> is the number of the bus.

Properties

.data: The BUS:B<x>:CPHY:C:DATA command tree.
.lp: The BUS:B<x>:CPHY:C:LP command tree.
.source: The BUS:B<x>:CPHY:C:SOUrce command.

data `property` ¶

data: BusBItemCphyCData

Return the BUS:B<x>:CPHY:C:DATA command tree.

Usage

Using the .query() method will send the BUS:B<x>:CPHY:C:DATA? query.
Using the .verify(value) method will send the BUS:B<x>:CPHY:C:DATA? query and raise an AssertionError if the returned value does not match value.

Info

B<x> is the number of the bus.

Sub-properties

.threshold: The BUS:B<x>:CPHY:C:DATA:THRESHold command.

lp `property` ¶

lp: BusBItemCphyCLp

Return the BUS:B<x>:CPHY:C:LP command tree.

Usage

Using the .query() method will send the BUS:B<x>:CPHY:C:LP? query.
Using the .verify(value) method will send the BUS:B<x>:CPHY:C:LP? query and raise an AssertionError if the returned value does not match value.

Info

B<x> is the number of the bus.

Sub-properties

.threshold: The BUS:B<x>:CPHY:C:LP:THRESHold command.

source `property` ¶

source: BusBItemCphyCSource

Return the BUS:B<x>:CPHY:C:SOUrce command.

Description

This command sets or queries the CPHY Single Ended C source for the specified bus line. The bus number is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:CPHY:C:SOUrce? query.
Using the .verify(value) method will send the BUS:B<x>:CPHY:C:SOUrce? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:CPHY:C:SOUrce value command.

SCPI Syntax

- BUS:B<x>:CPHY:C:SOUrce {S<x>_Ch<x>|CH<x>|MATH<x>|REF<x>}
- BUS:B<x>:CPHY:C:SOUrce?

Info

B<x> is the number of the bus.
S<x>_Ch<x> specifies the remote scope number and the analog channel.
CH<x> specifies an analog channel as the source.
MATH<x> specifies a math channel as the source.
REF<x> specifies an analog reference waveform as the source.

BusBItemCphyCData ¶

Bases: SCPICmdRead

The BUS:B<x>:CPHY:C:DATA command tree.

Usage

Using the .query() method will send the BUS:B<x>:CPHY:C:DATA? query.
Using the .verify(value) method will send the BUS:B<x>:CPHY:C:DATA? query and raise an AssertionError if the returned value does not match value.

Info

B<x> is the number of the bus.

Properties

.threshold: The BUS:B<x>:CPHY:C:DATA:THRESHold command.

threshold `property` ¶

threshold: BusBItemCphyCDataThreshold

Return the BUS:B<x>:CPHY:C:DATA:THRESHold command.

Description

This command sets or queries the CPHY Single Ended C source threshold for the specified bus. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:CPHY:C:DATA:THRESHold? query.
Using the .verify(value) method will send the BUS:B<x>:CPHY:C:DATA:THRESHold? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:CPHY:C:DATA:THRESHold value command.

SCPI Syntax

- BUS:B<x>:CPHY:C:DATA:THRESHold <NR3>
- BUS:B<x>:CPHY:C:DATA:THRESHold?

Info

B<x> is the number of the bus.
<NR3> is the CPHY Single Ended C threshold for the specified bus. The argument range is -8 V to +8 V.

BusBItemCphyCDataThreshold ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:CPHY:C:DATA:THRESHold command.

Description

This command sets or queries the CPHY Single Ended C source threshold for the specified bus. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:CPHY:C:DATA:THRESHold? query.
Using the .verify(value) method will send the BUS:B<x>:CPHY:C:DATA:THRESHold? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:CPHY:C:DATA:THRESHold value command.

SCPI Syntax

- BUS:B<x>:CPHY:C:DATA:THRESHold <NR3>
- BUS:B<x>:CPHY:C:DATA:THRESHold?

Info

B<x> is the number of the bus.
<NR3> is the CPHY Single Ended C threshold for the specified bus. The argument range is -8 V to +8 V.

BusBItemCphyCLp ¶

Bases: SCPICmdRead

The BUS:B<x>:CPHY:C:LP command tree.

Usage

Using the .query() method will send the BUS:B<x>:CPHY:C:LP? query.
Using the .verify(value) method will send the BUS:B<x>:CPHY:C:LP? query and raise an AssertionError if the returned value does not match value.

Info

B<x> is the number of the bus.

Properties

.threshold: The BUS:B<x>:CPHY:C:LP:THRESHold command.

threshold `property` ¶

threshold: BusBItemCphyCLpThreshold

Return the BUS:B<x>:CPHY:C:LP:THRESHold command.

Description

This command sets or queries the CPHY Single Ended C LP threshold for the specified bus. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:CPHY:C:LP:THRESHold? query.
Using the .verify(value) method will send the BUS:B<x>:CPHY:C:LP:THRESHold? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:CPHY:C:LP:THRESHold value command.

SCPI Syntax

- BUS:B<x>:CPHY:C:LP:THRESHold <NR3>
- BUS:B<x>:CPHY:C:LP:THRESHold?

Info

B<x> is the number of the bus.
<NR3> is the CPHY Single Ended C LP threshold for the specified bus. The argument range is -8 V to +8 V.

BusBItemCphyCLpThreshold ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:CPHY:C:LP:THRESHold command.

Description

This command sets or queries the CPHY Single Ended C LP threshold for the specified bus. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:CPHY:C:LP:THRESHold? query.
Using the .verify(value) method will send the BUS:B<x>:CPHY:C:LP:THRESHold? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:CPHY:C:LP:THRESHold value command.

SCPI Syntax

- BUS:B<x>:CPHY:C:LP:THRESHold <NR3>
- BUS:B<x>:CPHY:C:LP:THRESHold?

Info

B<x> is the number of the bus.
<NR3> is the CPHY Single Ended C LP threshold for the specified bus. The argument range is -8 V to +8 V.

BusBItemCphyCSource ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:CPHY:C:SOUrce command.

Description

This command sets or queries the CPHY Single Ended C source for the specified bus line. The bus number is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:CPHY:C:SOUrce? query.
Using the .verify(value) method will send the BUS:B<x>:CPHY:C:SOUrce? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:CPHY:C:SOUrce value command.

SCPI Syntax

- BUS:B<x>:CPHY:C:SOUrce {S<x>_Ch<x>|CH<x>|MATH<x>|REF<x>}
- BUS:B<x>:CPHY:C:SOUrce?

Info

B<x> is the number of the bus.
S<x>_Ch<x> specifies the remote scope number and the analog channel.
CH<x> specifies an analog channel as the source.
MATH<x> specifies a math channel as the source.
REF<x> specifies an analog reference waveform as the source.

BusBItemCphyCa ¶

Bases: SCPICmdRead

The BUS:B<x>:CPHY:CA command tree.

Usage

Using the .query() method will send the BUS:B<x>:CPHY:CA? query.
Using the .verify(value) method will send the BUS:B<x>:CPHY:CA? query and raise an AssertionError if the returned value does not match value.

Info

B<x> is the number of the bus.

Properties

.source: The BUS:B<x>:CPHY:CA:SOUrce command.
.threshold: The BUS:B<x>:CPHY:CA:THReshold command.

source `property` ¶

source: BusBItemCphyCaSource

Return the BUS:B<x>:CPHY:CA:SOUrce command.

Description

This command sets or queries the CPHY differential CA source for the specified bus line. The bus number is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:CPHY:CA:SOUrce? query.
Using the .verify(value) method will send the BUS:B<x>:CPHY:CA:SOUrce? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:CPHY:CA:SOUrce value command.

SCPI Syntax

- BUS:B<x>:CPHY:CA:SOUrce {S<x>_Ch<x>|CH<x>|MATH<x>|REF<x>}
- BUS:B<x>:CPHY:CA:SOUrce?

Info

B<x> is the number of the bus.
S<x>_Ch<x> specifies the remote scope number and the analog channel.
CH<x> specifies an analog/digital channel as the source.
MATH<x> specifies a math channel as the source.
REF<x> specifies an analog/digital reference waveform as the source.

threshold `property` ¶

threshold: BusBItemCphyCaThreshold

Return the BUS:B<x>:CPHY:CA:THReshold command.

Description

This command sets or queries the CPHY differential CA source threshold for the specified bus. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:CPHY:CA:THReshold? query.
Using the .verify(value) method will send the BUS:B<x>:CPHY:CA:THReshold? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:CPHY:CA:THReshold value command.

SCPI Syntax

- BUS:B<x>:CPHY:CA:THReshold <NR3>
- BUS:B<x>:CPHY:CA:THReshold?

Info

B<x> is the number of the bus.
<NR3> is the CPHY differential CA threshold for the specified bus. The argument range is -8 V to +8 V.

BusBItemCphyCaSource ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:CPHY:CA:SOUrce command.

Description

This command sets or queries the CPHY differential CA source for the specified bus line. The bus number is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:CPHY:CA:SOUrce? query.
Using the .verify(value) method will send the BUS:B<x>:CPHY:CA:SOUrce? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:CPHY:CA:SOUrce value command.

SCPI Syntax

- BUS:B<x>:CPHY:CA:SOUrce {S<x>_Ch<x>|CH<x>|MATH<x>|REF<x>}
- BUS:B<x>:CPHY:CA:SOUrce?

Info

B<x> is the number of the bus.
S<x>_Ch<x> specifies the remote scope number and the analog channel.
CH<x> specifies an analog/digital channel as the source.
MATH<x> specifies a math channel as the source.
REF<x> specifies an analog/digital reference waveform as the source.

BusBItemCphyCaThreshold ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:CPHY:CA:THReshold command.

Description

This command sets or queries the CPHY differential CA source threshold for the specified bus. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:CPHY:CA:THReshold? query.
Using the .verify(value) method will send the BUS:B<x>:CPHY:CA:THReshold? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:CPHY:CA:THReshold value command.

SCPI Syntax

- BUS:B<x>:CPHY:CA:THReshold <NR3>
- BUS:B<x>:CPHY:CA:THReshold?

Info

B<x> is the number of the bus.
<NR3> is the CPHY differential CA threshold for the specified bus. The argument range is -8 V to +8 V.

BusBItemCphyCgnd ¶

Bases: SCPICmdRead

The BUS:B<x>:CPHY:CGND command tree.

Usage

Using the .query() method will send the BUS:B<x>:CPHY:CGND? query.
Using the .verify(value) method will send the BUS:B<x>:CPHY:CGND? query and raise an AssertionError if the returned value does not match value.

Info

B<x> is the number of the bus.

Properties

.source: The BUS:B<x>:CPHY:CGND:SOUrce command.
.threshold: The BUS:B<x>:CPHY:CGND:THReshold command.

source `property` ¶

source: BusBItemCphyCgndSource

Return the BUS:B<x>:CPHY:CGND:SOUrce command.

Description

This command sets or queries the CPHY differential CGND source for the specified bus line. The bus number is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:CPHY:CGND:SOUrce? query.
Using the .verify(value) method will send the BUS:B<x>:CPHY:CGND:SOUrce? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:CPHY:CGND:SOUrce value command.

SCPI Syntax

- BUS:B<x>:CPHY:CGND:SOUrce {S<x>_Ch<x>|CH<x>|MATH<x>|REF<x>}
- BUS:B<x>:CPHY:CGND:SOUrce?

Info

B<x> is the number of the bus.
S<x>_Ch<x> specifies the remote scope number and the analog channel.
CH<x> specifies an analog/digital channel as the source.
MATH<x> specifies a math channel as the source.
REF<x> specifies an analog/digital reference waveform as the source.

threshold `property` ¶

threshold: BusBItemCphyCgndThreshold

Return the BUS:B<x>:CPHY:CGND:THReshold command.

Description

This command sets or queries the CPHY differential CGND source threshold for the specified bus. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:CPHY:CGND:THReshold? query.
Using the .verify(value) method will send the BUS:B<x>:CPHY:CGND:THReshold? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:CPHY:CGND:THReshold value command.

SCPI Syntax

- BUS:B<x>:CPHY:CGND:THReshold <NR3>
- BUS:B<x>:CPHY:CGND:THReshold?

Info

B<x> is the number of the bus.
<NR3> is the CPHY differential C GND threshold for the specified bus. The argument range is -8 V to +8 V.

BusBItemCphyCgndSource ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:CPHY:CGND:SOUrce command.

Description

This command sets or queries the CPHY differential CGND source for the specified bus line. The bus number is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:CPHY:CGND:SOUrce? query.
Using the .verify(value) method will send the BUS:B<x>:CPHY:CGND:SOUrce? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:CPHY:CGND:SOUrce value command.

SCPI Syntax

- BUS:B<x>:CPHY:CGND:SOUrce {S<x>_Ch<x>|CH<x>|MATH<x>|REF<x>}
- BUS:B<x>:CPHY:CGND:SOUrce?

Info

B<x> is the number of the bus.
S<x>_Ch<x> specifies the remote scope number and the analog channel.
CH<x> specifies an analog/digital channel as the source.
MATH<x> specifies a math channel as the source.
REF<x> specifies an analog/digital reference waveform as the source.

BusBItemCphyCgndThreshold ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:CPHY:CGND:THReshold command.

Description

This command sets or queries the CPHY differential CGND source threshold for the specified bus. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:CPHY:CGND:THReshold? query.
Using the .verify(value) method will send the BUS:B<x>:CPHY:CGND:THReshold? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:CPHY:CGND:THReshold value command.

SCPI Syntax

- BUS:B<x>:CPHY:CGND:THReshold <NR3>
- BUS:B<x>:CPHY:CGND:THReshold?

Info

B<x> is the number of the bus.
<NR3> is the CPHY differential C GND threshold for the specified bus. The argument range is -8 V to +8 V.

BusBItemCphyLp ¶

Bases: SCPICmdRead

The BUS:B<x>:CPHY:LP command tree.

Usage

Using the .query() method will send the BUS:B<x>:CPHY:LP? query.
Using the .verify(value) method will send the BUS:B<x>:CPHY:LP? query and raise an AssertionError if the returned value does not match value.

Info

B<x> is the number of the bus.

Properties

.direction: The BUS:B<x>:CPHY:LP:DIRection command.

direction `property` ¶

direction: BusBItemCphyLpDirection

Return the BUS:B<x>:CPHY:LP:DIRection command.

Description

This command sets or queries the CPHY bus direction in low power. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:CPHY:LP:DIRection? query.
Using the .verify(value) method will send the BUS:B<x>:CPHY:LP:DIRection? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:CPHY:LP:DIRection value command.

SCPI Syntax

- BUS:B<x>:CPHY:LP:DIRection {forward|reverse}
- BUS:B<x>:CPHY:LP:DIRection?

Info

B<x> is the number of the bus.
forward specifies the direction in low power to forward. The default direction is forward.
reverse specifies the direction in low power to reverse.

BusBItemCphyLpDirection ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:CPHY:LP:DIRection command.

Description

This command sets or queries the CPHY bus direction in low power. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:CPHY:LP:DIRection? query.
Using the .verify(value) method will send the BUS:B<x>:CPHY:LP:DIRection? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:CPHY:LP:DIRection value command.

SCPI Syntax

- BUS:B<x>:CPHY:LP:DIRection {forward|reverse}
- BUS:B<x>:CPHY:LP:DIRection?

Info

B<x> is the number of the bus.
forward specifies the direction in low power to forward. The default direction is forward.
reverse specifies the direction in low power to reverse.

BusBItemCphySignaltype ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:CPHY:SIGNALTYpe command.

Description

This command sets or queries the signal type for CPHY bus decode. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:CPHY:SIGNALTYpe? query.
Using the .verify(value) method will send the BUS:B<x>:CPHY:SIGNALTYpe? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:CPHY:SIGNALTYpe value command.

SCPI Syntax

- BUS:B<x>:CPHY:SIGNALTYpe {SINGLE|DIFF}
- BUS:B<x>:CPHY:SIGNALTYpe?

Info

B<x> is the number of the bus.
SINGLE specifies the signal type to single ended.
DIFF specifies the signal type to differential. The default type is differential.

BusBItemCphySubtype ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:CPHY:SUBTYPe command.

Description

This command sets or queries the sub type for CPHY bus decode. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:CPHY:SUBTYPe? query.
Using the .verify(value) method will send the BUS:B<x>:CPHY:SUBTYPe? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:CPHY:SUBTYPe value command.

SCPI Syntax

- BUS:B<x>:CPHY:SUBTYPe {CSI|DSI|Word|Symbol}
- BUS:B<x>:CPHY:SUBTYPe?

Info

B<x> is the number of the bus.
CSI specifies the protocol type to CSI. The default type is CSI.
DSI specifies the protocol type to DSI.
Word specifies the protocol type to word.
Symbol specifies the protocol type to symbol.

BusBItemCxpi ¶

Bases: SCPICmdRead

The BUS:B<x>:CXPI command tree.

Usage

Using the .query() method will send the BUS:B<x>:CXPI? query.
Using the .verify(value) method will send the BUS:B<x>:CXPI? query and raise an AssertionError if the returned value does not match value.

Properties

.bitrate: The BUS:B<x>:CXPI:BITRate command.
.rec: The BUS:B<x>:CXPI:REC command tree.
.source: The BUS:B<x>:CXPI:SOUrce command.

bitrate `property` ¶

bitrate: BusBItemCxpiBitrate

Return the BUS:B<x>:CXPI:BITRate command.

Description

This command sets or queries the bit rate for the specified CXPI bus. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:CXPI:BITRate? query.
Using the .verify(value) method will send the BUS:B<x>:CXPI:BITRate? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:CXPI:BITRate value command.

SCPI Syntax

- BUS:B<x>:CXPI:BITRate <NR1>
- BUS:B<x>:CXPI:BITRate?

Info

<NR1> sets the CXPI Source bit rate for the specified bus. The default value is 19.2 kbps and the valid range is 1 bps to 20 kbps.

rec `property` ¶

rec: BusBItemCxpiRec

Return the BUS:B<x>:CXPI:REC command tree.

Usage

Using the .query() method will send the BUS:B<x>:CXPI:REC? query.
Using the .verify(value) method will send the BUS:B<x>:CXPI:REC? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.threshold: The BUS:B<x>:CXPI:REC:THReshold command.

source `property` ¶

source: BusBItemCxpiSource

Return the BUS:B<x>:CXPI:SOUrce command.

Description

This command sets or queries the source channel for the specified CXPI bus. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:CXPI:SOUrce? query.
Using the .verify(value) method will send the BUS:B<x>:CXPI:SOUrce? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:CXPI:SOUrce value command.

SCPI Syntax

- BUS:B<x>:CXPI:SOUrce {S<x>_Ch<x>|CH<x>|MATH<x>|REF<x>}
- BUS:B<x>:CXPI:SOUrce?

Info

S<x>_Ch<x> specifies the remote scope number and the analog channel.
CH<x> specifies an analog channel as the source, where is the channel number.
MATH<x> specifies a math channel as the source, where is the math waveform number.
REF<x> specifies a digital reference waveform as the source, where is the reference waveform number.

BusBItemCxpiBitrate ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:CXPI:BITRate command.

Description

This command sets or queries the bit rate for the specified CXPI bus. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:CXPI:BITRate? query.
Using the .verify(value) method will send the BUS:B<x>:CXPI:BITRate? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:CXPI:BITRate value command.

SCPI Syntax

- BUS:B<x>:CXPI:BITRate <NR1>
- BUS:B<x>:CXPI:BITRate?

Info

<NR1> sets the CXPI Source bit rate for the specified bus. The default value is 19.2 kbps and the valid range is 1 bps to 20 kbps.

BusBItemCxpiRec ¶

Bases: SCPICmdRead

The BUS:B<x>:CXPI:REC command tree.

Usage

Using the .query() method will send the BUS:B<x>:CXPI:REC? query.
Using the .verify(value) method will send the BUS:B<x>:CXPI:REC? query and raise an AssertionError if the returned value does not match value.

Properties

.threshold: The BUS:B<x>:CXPI:REC:THReshold command.

threshold `property` ¶

threshold: BusBItemCxpiRecThreshold

Return the BUS:B<x>:CXPI:REC:THReshold command.

Description

This command sets or queries the source channel recessive threshold for the specified CXPI bus. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:CXPI:REC:THReshold? query.
Using the .verify(value) method will send the BUS:B<x>:CXPI:REC:THReshold? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:CXPI:REC:THReshold value command.

SCPI Syntax

- BUS:B<x>:CXPI:REC:THReshold <NR3>
- BUS:B<x>:CXPI:REC:THReshold?

Info

<NR3> sets the CXPI Source recessive threshold for the specified bus. The default value is 0 V and the valid range is -12 V to +12 V.

BusBItemCxpiRecThreshold ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:CXPI:REC:THReshold command.

Description

This command sets or queries the source channel recessive threshold for the specified CXPI bus. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:CXPI:REC:THReshold? query.
Using the .verify(value) method will send the BUS:B<x>:CXPI:REC:THReshold? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:CXPI:REC:THReshold value command.

SCPI Syntax

- BUS:B<x>:CXPI:REC:THReshold <NR3>
- BUS:B<x>:CXPI:REC:THReshold?

Info

<NR3> sets the CXPI Source recessive threshold for the specified bus. The default value is 0 V and the valid range is -12 V to +12 V.

BusBItemCxpiSource ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:CXPI:SOUrce command.

Description

This command sets or queries the source channel for the specified CXPI bus. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:CXPI:SOUrce? query.
Using the .verify(value) method will send the BUS:B<x>:CXPI:SOUrce? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:CXPI:SOUrce value command.

SCPI Syntax

- BUS:B<x>:CXPI:SOUrce {S<x>_Ch<x>|CH<x>|MATH<x>|REF<x>}
- BUS:B<x>:CXPI:SOUrce?

Info

S<x>_Ch<x> specifies the remote scope number and the analog channel.
CH<x> specifies an analog channel as the source, where is the channel number.
MATH<x> specifies a math channel as the source, where is the math waveform number.
REF<x> specifies a digital reference waveform as the source, where is the reference waveform number.

BusBItemDisplay ¶

Bases: SCPICmdRead

The BUS:B<x>:DISplay command tree.

Usage

Using the .query() method will send the BUS:B<x>:DISplay? query.
Using the .verify(value) method will send the BUS:B<x>:DISplay? query and raise an AssertionError if the returned value does not match value.

Info

B<x> is the number of the bus.

Properties

.format: The BUS:B<x>:DISplay:FORMat command.
.layout: The BUS:B<x>:DISplay:LAYout command.

format `property` ¶

format: BusBItemDisplayFormat

Return the BUS:B<x>:DISplay:FORMat command.

Description

This command sets or queries how the data is represented in the bus form for the specified bus. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:DISplay:FORMat? query.
Using the .verify(value) method will send the BUS:B<x>:DISplay:FORMat? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:DISplay:FORMat value command.

SCPI Syntax

- BUS:B<x>:DISplay:FORMat {HEX|BINARY|MIXEDASCII|MIXEDHEX|ASCII|DECIMAL|MIXED}
- BUS:B<x>:DISplay:FORMat?

Info

B<x> is the number of the bus.
HEX specifies hexadecimal format.
BINARY specifies binary format.
MIXEDASCII specifies mixed ASCII format.
MIXEDHEX specifies mixed hexadecimal format.
ASCII specifies ASCII format.
DECIMAL specifies decimal format.
MIXED specifies mixed format.

layout `property` ¶

layout: BusBItemDisplayLayout

Return the BUS:B<x>:DISplay:LAYout command.

Description

This command sets or queries what to display for the specified bus. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:DISplay:LAYout? query.
Using the .verify(value) method will send the BUS:B<x>:DISplay:LAYout? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:DISplay:LAYout value command.

SCPI Syntax

- BUS:B<x>:DISplay:LAYout {BUS|BUSANDWAVEFORM}
- BUS:B<x>:DISplay:LAYout?

Info

B<x> is the number of the bus.
BUS specifies displaying the bus form only.
BUSANDWAVEFORM specifies displaying the bus form and the constituent source waveform(s). This argument is not available for some bus types and some bus configurations.

BusBItemDisplayFormat ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:DISplay:FORMat command.

Description

This command sets or queries how the data is represented in the bus form for the specified bus. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:DISplay:FORMat? query.
Using the .verify(value) method will send the BUS:B<x>:DISplay:FORMat? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:DISplay:FORMat value command.

SCPI Syntax

- BUS:B<x>:DISplay:FORMat {HEX|BINARY|MIXEDASCII|MIXEDHEX|ASCII|DECIMAL|MIXED}
- BUS:B<x>:DISplay:FORMat?

Info

B<x> is the number of the bus.
HEX specifies hexadecimal format.
BINARY specifies binary format.
MIXEDASCII specifies mixed ASCII format.
MIXEDHEX specifies mixed hexadecimal format.
ASCII specifies ASCII format.
DECIMAL specifies decimal format.
MIXED specifies mixed format.

BusBItemDisplayLayout ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:DISplay:LAYout command.

Description

This command sets or queries what to display for the specified bus. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:DISplay:LAYout? query.
Using the .verify(value) method will send the BUS:B<x>:DISplay:LAYout? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:DISplay:LAYout value command.

SCPI Syntax

- BUS:B<x>:DISplay:LAYout {BUS|BUSANDWAVEFORM}
- BUS:B<x>:DISplay:LAYout?

Info

B<x> is the number of the bus.
BUS specifies displaying the bus form only.
BUSANDWAVEFORM specifies displaying the bus form and the constituent source waveform(s). This argument is not available for some bus types and some bus configurations.

BusBItemDphy ¶

Bases: SCPICmdRead

The BUS:B<x>:DPHY command tree.

Usage

Using the .query() method will send the BUS:B<x>:DPHY? query.
Using the .verify(value) method will send the BUS:B<x>:DPHY? query and raise an AssertionError if the returned value does not match value.

Properties

.clock: The BUS:B<x>:DPHY:CLOCk command tree.
.dminus: The BUS:B<x>:DPHY:DMINus command tree.
.dplus: The BUS:B<x>:DPHY:DPlus command tree.
.lp: The BUS:B<x>:DPHY:LP command tree.
.protocol: The BUS:B<x>:DPHY:PROTocol command tree.
.signal: The BUS:B<x>:DPHY:SIGNal command tree.

clock `property` ¶

clock: BusBItemDphyClock

Return the BUS:B<x>:DPHY:CLOCk command tree.

Usage

Using the .query() method will send the BUS:B<x>:DPHY:CLOCk? query.
Using the .verify(value) method will send the BUS:B<x>:DPHY:CLOCk? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.source: The BUS:B<x>:DPHY:CLOCk:SOUrce command.
.threshold: The BUS:B<x>:DPHY:CLOCk:THRESHold command.

dminus `property` ¶

dminus: BusBItemDphyDminus

Return the BUS:B<x>:DPHY:DMINus command tree.

Usage

Using the .query() method will send the BUS:B<x>:DPHY:DMINus? query.
Using the .verify(value) method will send the BUS:B<x>:DPHY:DMINus? query and raise an AssertionError if the returned value does not match value.

Info

B<x> is the number of the bus.

Sub-properties

.datathreshold: The BUS:B<x>:DPHY:DMINus:DATATHRESHold command.
.lpthreshold: The BUS:B<x>:DPHY:DMINus:LPTHRESHold command.
.source: The BUS:B<x>:DPHY:DMINus:SOUrce command.

dplus `property` ¶

dplus: BusBItemDphyDplus

Return the BUS:B<x>:DPHY:DPlus command tree.

Usage

Using the .query() method will send the BUS:B<x>:DPHY:DPlus? query.
Using the .verify(value) method will send the BUS:B<x>:DPHY:DPlus? query and raise an AssertionError if the returned value does not match value.

Info

B<x> is the number of the bus.

Sub-properties

.datathreshold: The BUS:B<x>:DPHY:DPlus:DATATHRESHold command.
.lpthreshold: The BUS:B<x>:DPHY:DPlus:LPTHRESHold command.
.source: The BUS:B<x>:DPHY:DPlus:SOUrce command.

lp `property` ¶

lp: BusBItemDphyLp

Return the BUS:B<x>:DPHY:LP command tree.

Usage

Using the .query() method will send the BUS:B<x>:DPHY:LP? query.
Using the .verify(value) method will send the BUS:B<x>:DPHY:LP? query and raise an AssertionError if the returned value does not match value.

Info

B<x> is the Bus number.

Sub-properties

.direction: The BUS:B<x>:DPHY:LP:DIRection command.

protocol `property` ¶

protocol: BusBItemDphyProtocol

Return the BUS:B<x>:DPHY:PROTocol command tree.

Usage

Using the .query() method will send the BUS:B<x>:DPHY:PROTocol? query.
Using the .verify(value) method will send the BUS:B<x>:DPHY:PROTocol? query and raise an AssertionError if the returned value does not match value.

Info

B<x> is the Bus number.

Sub-properties

.type: The BUS:B<x>:DPHY:PROTocol:TYPe command.

signal `property` ¶

signal: BusBItemDphySignal

Return the BUS:B<x>:DPHY:SIGNal command tree.

Usage

Using the .query() method will send the BUS:B<x>:DPHY:SIGNal? query.
Using the .verify(value) method will send the BUS:B<x>:DPHY:SIGNal? query and raise an AssertionError if the returned value does not match value.

Info

B<x> is the Bus number.

Sub-properties

.encoding: The BUS:B<x>:DPHY:SIGNal:ENCoding command.

BusBItemDphyClock ¶

Bases: SCPICmdRead

The BUS:B<x>:DPHY:CLOCk command tree.

Usage

Using the .query() method will send the BUS:B<x>:DPHY:CLOCk? query.
Using the .verify(value) method will send the BUS:B<x>:DPHY:CLOCk? query and raise an AssertionError if the returned value does not match value.

Properties

.source: The BUS:B<x>:DPHY:CLOCk:SOUrce command.
.threshold: The BUS:B<x>:DPHY:CLOCk:THRESHold command.

source `property` ¶

source: BusBItemDphyClockSource

Return the BUS:B<x>:DPHY:CLOCk:SOUrce command.

Description

This command sets or queries the DPHY Clock source for the specified bus line. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:DPHY:CLOCk:SOUrce? query.
Using the .verify(value) method will send the BUS:B<x>:DPHY:CLOCk:SOUrce? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:DPHY:CLOCk:SOUrce value command.

SCPI Syntax

- BUS:B<x>:DPHY:CLOCk:SOUrce {S<x>_Ch<x>|CH<x>|MATH<x>|REF<x<>}
- BUS:B<x>:DPHY:CLOCk:SOUrce?

Info

Bus<x> is the Bus number.
S<x>_Ch<x> specifies the remote scope number and the analog channel as the source.
CH<x> specifies an analog channel as the source, where is the channel number.
MATH<x> specifies a math channel as the source, where is the math waveform number.
REF<x> specifies a reference waveform as the source, where is the reference waveform number.

threshold `property` ¶

threshold: BusBItemDphyClockThreshold

Return the BUS:B<x>:DPHY:CLOCk:THRESHold command.

Description

This command sets or queries the DPHY Clock source threshold for the specified bus. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:DPHY:CLOCk:THRESHold? query.
Using the .verify(value) method will send the BUS:B<x>:DPHY:CLOCk:THRESHold? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:DPHY:CLOCk:THRESHold value command.

SCPI Syntax

- BUS:B<x>:DPHY:CLOCk:THRESHold <NR3>
- BUS:B<x>:DPHY:CLOCk:THRESHold?

Info

B<x> is the number of the bus.
<NR3> is the DPHY clock high threshold for the specified bus. The argument range is -8V to +8V.

BusBItemDphyClockSource ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:DPHY:CLOCk:SOUrce command.

Description

This command sets or queries the DPHY Clock source for the specified bus line. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:DPHY:CLOCk:SOUrce? query.
Using the .verify(value) method will send the BUS:B<x>:DPHY:CLOCk:SOUrce? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:DPHY:CLOCk:SOUrce value command.

SCPI Syntax

- BUS:B<x>:DPHY:CLOCk:SOUrce {S<x>_Ch<x>|CH<x>|MATH<x>|REF<x<>}
- BUS:B<x>:DPHY:CLOCk:SOUrce?

Info

Bus<x> is the Bus number.
S<x>_Ch<x> specifies the remote scope number and the analog channel as the source.
CH<x> specifies an analog channel as the source, where is the channel number.
MATH<x> specifies a math channel as the source, where is the math waveform number.
REF<x> specifies a reference waveform as the source, where is the reference waveform number.

BusBItemDphyClockThreshold ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:DPHY:CLOCk:THRESHold command.

Description

This command sets or queries the DPHY Clock source threshold for the specified bus. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:DPHY:CLOCk:THRESHold? query.
Using the .verify(value) method will send the BUS:B<x>:DPHY:CLOCk:THRESHold? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:DPHY:CLOCk:THRESHold value command.

SCPI Syntax

- BUS:B<x>:DPHY:CLOCk:THRESHold <NR3>
- BUS:B<x>:DPHY:CLOCk:THRESHold?

Info

B<x> is the number of the bus.
<NR3> is the DPHY clock high threshold for the specified bus. The argument range is -8V to +8V.

BusBItemDphyDminus ¶

Bases: SCPICmdRead

The BUS:B<x>:DPHY:DMINus command tree.

Usage

Using the .query() method will send the BUS:B<x>:DPHY:DMINus? query.
Using the .verify(value) method will send the BUS:B<x>:DPHY:DMINus? query and raise an AssertionError if the returned value does not match value.

Info

B<x> is the number of the bus.

Properties

.datathreshold: The BUS:B<x>:DPHY:DMINus:DATATHRESHold command.
.lpthreshold: The BUS:B<x>:DPHY:DMINus:LPTHRESHold command.
.source: The BUS:B<x>:DPHY:DMINus:SOUrce command.

datathreshold `property` ¶

datathreshold: BusBItemDphyDminusDatathreshold

Return the BUS:B<x>:DPHY:DMINus:DATATHRESHold command.

Description

This command sets or queries the DPHY D- source data threshold for the specified bus. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:DPHY:DMINus:DATATHRESHold? query.
Using the .verify(value) method will send the BUS:B<x>:DPHY:DMINus:DATATHRESHold? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:DPHY:DMINus:DATATHRESHold value command.

SCPI Syntax

- BUS:B<x>:DPHY:DMINus:DATATHRESHold <NR3>
- BUS:B<x>:DPHY:DMINus:DATATHRESHold?

Info

B<x> is the number of the bus.
<NR3> is the DPHY D- source data threshold for the specified bus. The argument range is -8V to +8V.

lpthreshold `property` ¶

lpthreshold: BusBItemDphyDminusLpthreshold

Return the BUS:B<x>:DPHY:DMINus:LPTHRESHold command.

Description

This command sets or queries the DPHY D- source low power threshold for the specified bus. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:DPHY:DMINus:LPTHRESHold? query.
Using the .verify(value) method will send the BUS:B<x>:DPHY:DMINus:LPTHRESHold? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:DPHY:DMINus:LPTHRESHold value command.

SCPI Syntax

- BUS:B<x>:DPHY:DMINus:LPTHRESHold <NR3>
- BUS:B<x>:DPHY:DMINus:LPTHRESHold?

Info

B<x> is the number of the bus.
<NR3> is the DPHY D- source low power threshold for the specified bus. The argument range is -8V to +8V.

source `property` ¶

source: BusBItemDphyDminusSource

Return the BUS:B<x>:DPHY:DMINus:SOUrce command.

Description

This command sets or queries the DPHY D- source for the specified bus line. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:DPHY:DMINus:SOUrce? query.
Using the .verify(value) method will send the BUS:B<x>:DPHY:DMINus:SOUrce? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:DPHY:DMINus:SOUrce value command.

SCPI Syntax

- BUS:B<x>:DPHY:DMINus:SOUrce {S<x>_Ch<x>|CH<x>|MATH<x>|REF<x<>}
- BUS:B<x>:DPHY:DMINus:SOUrce?

Info

Bus<x> is the Bus number.
S<x>_Ch<x> specifies the remote scope number and the analog channel as the source.
CH<x> specifies an analog channel as the source, where is the channel number.
MATH<x> specifies a math channel as the source, where is the math waveform number.
REF<x> specifies a reference waveform as the source, where is the reference waveform number.

BusBItemDphyDminusDatathreshold ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:DPHY:DMINus:DATATHRESHold command.

Description

This command sets or queries the DPHY D- source data threshold for the specified bus. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:DPHY:DMINus:DATATHRESHold? query.
Using the .verify(value) method will send the BUS:B<x>:DPHY:DMINus:DATATHRESHold? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:DPHY:DMINus:DATATHRESHold value command.

SCPI Syntax

- BUS:B<x>:DPHY:DMINus:DATATHRESHold <NR3>
- BUS:B<x>:DPHY:DMINus:DATATHRESHold?

Info

B<x> is the number of the bus.
<NR3> is the DPHY D- source data threshold for the specified bus. The argument range is -8V to +8V.

BusBItemDphyDminusLpthreshold ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:DPHY:DMINus:LPTHRESHold command.

Description

This command sets or queries the DPHY D- source low power threshold for the specified bus. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:DPHY:DMINus:LPTHRESHold? query.
Using the .verify(value) method will send the BUS:B<x>:DPHY:DMINus:LPTHRESHold? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:DPHY:DMINus:LPTHRESHold value command.

SCPI Syntax

- BUS:B<x>:DPHY:DMINus:LPTHRESHold <NR3>
- BUS:B<x>:DPHY:DMINus:LPTHRESHold?

Info

B<x> is the number of the bus.
<NR3> is the DPHY D- source low power threshold for the specified bus. The argument range is -8V to +8V.

BusBItemDphyDminusSource ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:DPHY:DMINus:SOUrce command.

Description

This command sets or queries the DPHY D- source for the specified bus line. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:DPHY:DMINus:SOUrce? query.
Using the .verify(value) method will send the BUS:B<x>:DPHY:DMINus:SOUrce? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:DPHY:DMINus:SOUrce value command.

SCPI Syntax

- BUS:B<x>:DPHY:DMINus:SOUrce {S<x>_Ch<x>|CH<x>|MATH<x>|REF<x<>}
- BUS:B<x>:DPHY:DMINus:SOUrce?

Info

Bus<x> is the Bus number.
S<x>_Ch<x> specifies the remote scope number and the analog channel as the source.
CH<x> specifies an analog channel as the source, where is the channel number.
MATH<x> specifies a math channel as the source, where is the math waveform number.
REF<x> specifies a reference waveform as the source, where is the reference waveform number.

BusBItemDphyDplus ¶

Bases: SCPICmdRead

The BUS:B<x>:DPHY:DPlus command tree.

Usage

Using the .query() method will send the BUS:B<x>:DPHY:DPlus? query.
Using the .verify(value) method will send the BUS:B<x>:DPHY:DPlus? query and raise an AssertionError if the returned value does not match value.

Info

B<x> is the number of the bus.

Properties

.datathreshold: The BUS:B<x>:DPHY:DPlus:DATATHRESHold command.
.lpthreshold: The BUS:B<x>:DPHY:DPlus:LPTHRESHold command.
.source: The BUS:B<x>:DPHY:DPlus:SOUrce command.

datathreshold `property` ¶

datathreshold: BusBItemDphyDplusDatathreshold

Return the BUS:B<x>:DPHY:DPlus:DATATHRESHold command.

Description

This command sets or queries the D+ source data threshold for the specified bus. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:DPHY:DPlus:DATATHRESHold? query.
Using the .verify(value) method will send the BUS:B<x>:DPHY:DPlus:DATATHRESHold? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:DPHY:DPlus:DATATHRESHold value command.

SCPI Syntax

- BUS:B<x>:DPHY:DPlus:DATATHRESHold <NR3>
- BUS:B<x>:DPHY:DPlus:DATATHRESHold?

Info

B<x> is the number of the bus.
<NR3> is the DPHY D+ source data threshold for the specified bus. The argument range is -8V to +8V.

lpthreshold `property` ¶

lpthreshold: BusBItemDphyDplusLpthreshold

Return the BUS:B<x>:DPHY:DPlus:LPTHRESHold command.

Description

This command sets or queries the DPHY D+ source low power threshold for the specified bus. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:DPHY:DPlus:LPTHRESHold? query.
Using the .verify(value) method will send the BUS:B<x>:DPHY:DPlus:LPTHRESHold? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:DPHY:DPlus:LPTHRESHold value command.

SCPI Syntax

- BUS:B<x>:DPHY:DPlus:LPTHRESHold <NR3>
- BUS:B<x>:DPHY:DPlus:LPTHRESHold?

Info

B<x> is the number of the bus.
<NR3> is the DPHY D+ source low power threshold for the specified bus. The argument range is -8V to +8V.

source `property` ¶

source: BusBItemDphyDplusSource

Return the BUS:B<x>:DPHY:DPlus:SOUrce command.

Description

This command sets or queries the DPHY D+ source for the specified bus line. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:DPHY:DPlus:SOUrce? query.
Using the .verify(value) method will send the BUS:B<x>:DPHY:DPlus:SOUrce? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:DPHY:DPlus:SOUrce value command.

SCPI Syntax

- BUS:B<x>:DPHY:DPlus:SOUrce {S<x>_Ch<x>|CH<x>|MATH<x>|REF<x<>}
- BUS:B<x>:DPHY:DPlus:SOUrce?

Info

Bus<x> is the Bus number.
S<x>_Ch<x> specifies the remote scope number and the analog channel as the source.
CH<x> specifies an analog channel as the source, where is the channel number.
MATH<x> specifies a math channel as the source, where is the math waveform number.
REF<x> specifies a reference waveform as the source, where is the reference waveform number.

BusBItemDphyDplusDatathreshold ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:DPHY:DPlus:DATATHRESHold command.

Description

This command sets or queries the D+ source data threshold for the specified bus. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:DPHY:DPlus:DATATHRESHold? query.
Using the .verify(value) method will send the BUS:B<x>:DPHY:DPlus:DATATHRESHold? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:DPHY:DPlus:DATATHRESHold value command.

SCPI Syntax

- BUS:B<x>:DPHY:DPlus:DATATHRESHold <NR3>
- BUS:B<x>:DPHY:DPlus:DATATHRESHold?

Info

B<x> is the number of the bus.
<NR3> is the DPHY D+ source data threshold for the specified bus. The argument range is -8V to +8V.

BusBItemDphyDplusLpthreshold ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:DPHY:DPlus:LPTHRESHold command.

Description

This command sets or queries the DPHY D+ source low power threshold for the specified bus. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:DPHY:DPlus:LPTHRESHold? query.
Using the .verify(value) method will send the BUS:B<x>:DPHY:DPlus:LPTHRESHold? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:DPHY:DPlus:LPTHRESHold value command.

SCPI Syntax

- BUS:B<x>:DPHY:DPlus:LPTHRESHold <NR3>
- BUS:B<x>:DPHY:DPlus:LPTHRESHold?

Info

B<x> is the number of the bus.
<NR3> is the DPHY D+ source low power threshold for the specified bus. The argument range is -8V to +8V.

BusBItemDphyDplusSource ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:DPHY:DPlus:SOUrce command.

Description

This command sets or queries the DPHY D+ source for the specified bus line. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:DPHY:DPlus:SOUrce? query.
Using the .verify(value) method will send the BUS:B<x>:DPHY:DPlus:SOUrce? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:DPHY:DPlus:SOUrce value command.

SCPI Syntax

- BUS:B<x>:DPHY:DPlus:SOUrce {S<x>_Ch<x>|CH<x>|MATH<x>|REF<x<>}
- BUS:B<x>:DPHY:DPlus:SOUrce?

Info

Bus<x> is the Bus number.
S<x>_Ch<x> specifies the remote scope number and the analog channel as the source.
CH<x> specifies an analog channel as the source, where is the channel number.
MATH<x> specifies a math channel as the source, where is the math waveform number.
REF<x> specifies a reference waveform as the source, where is the reference waveform number.

BusBItemDphyLp ¶

Bases: SCPICmdRead

The BUS:B<x>:DPHY:LP command tree.

Usage

Using the .query() method will send the BUS:B<x>:DPHY:LP? query.
Using the .verify(value) method will send the BUS:B<x>:DPHY:LP? query and raise an AssertionError if the returned value does not match value.

Info

B<x> is the Bus number.

Properties

.direction: The BUS:B<x>:DPHY:LP:DIRection command.

direction `property` ¶

direction: BusBItemDphyLpDirection

Return the BUS:B<x>:DPHY:LP:DIRection command.

Description

This command sets or queries the DPHY bus direction in low power. By default lp direction is set to forward. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:DPHY:LP:DIRection? query.
Using the .verify(value) method will send the BUS:B<x>:DPHY:LP:DIRection? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:DPHY:LP:DIRection value command.

SCPI Syntax

- BUS:B<x>:DPHY:LP:DIRection {forward|reverse}
- BUS:B<x>:DPHY:LP:DIRection?

Info

B<x> is the Bus number.
forward specifies the direction as forward.
reverse specifies the direction as reverse.

BusBItemDphyLpDirection ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:DPHY:LP:DIRection command.

Description

This command sets or queries the DPHY bus direction in low power. By default lp direction is set to forward. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:DPHY:LP:DIRection? query.
Using the .verify(value) method will send the BUS:B<x>:DPHY:LP:DIRection? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:DPHY:LP:DIRection value command.

SCPI Syntax

- BUS:B<x>:DPHY:LP:DIRection {forward|reverse}
- BUS:B<x>:DPHY:LP:DIRection?

Info

B<x> is the Bus number.
forward specifies the direction as forward.
reverse specifies the direction as reverse.

BusBItemDphyProtocol ¶

Bases: SCPICmdRead

The BUS:B<x>:DPHY:PROTocol command tree.

Usage

Using the .query() method will send the BUS:B<x>:DPHY:PROTocol? query.
Using the .verify(value) method will send the BUS:B<x>:DPHY:PROTocol? query and raise an AssertionError if the returned value does not match value.

Info

B<x> is the Bus number.

Properties

.type: The BUS:B<x>:DPHY:PROTocol:TYPe command.

type `property` ¶

type: BusBItemDphyProtocolType

Return the BUS:B<x>:DPHY:PROTocol:TYPe command.

Description

This command sets or queries the protocol type for DPHY bus decode. The default type is CSI. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:DPHY:PROTocol:TYPe? query.
Using the .verify(value) method will send the BUS:B<x>:DPHY:PROTocol:TYPe? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:DPHY:PROTocol:TYPe value command.

SCPI Syntax

- BUS:B<x>:DPHY:PROTocol:TYPe {CSI|DSI}
- BUS:B<x>:DPHY:PROTocol:TYPe?

Info

B<x> is the Bus number.
CSI specifies the protocol type as CSI.
DSI specifies the protocol type as DSI.

BusBItemDphyProtocolType ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:DPHY:PROTocol:TYPe command.

Description

This command sets or queries the protocol type for DPHY bus decode. The default type is CSI. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:DPHY:PROTocol:TYPe? query.
Using the .verify(value) method will send the BUS:B<x>:DPHY:PROTocol:TYPe? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:DPHY:PROTocol:TYPe value command.

SCPI Syntax

- BUS:B<x>:DPHY:PROTocol:TYPe {CSI|DSI}
- BUS:B<x>:DPHY:PROTocol:TYPe?

Info

B<x> is the Bus number.
CSI specifies the protocol type as CSI.
DSI specifies the protocol type as DSI.

BusBItemDphySignal ¶

Bases: SCPICmdRead

The BUS:B<x>:DPHY:SIGNal command tree.

Usage

Using the .query() method will send the BUS:B<x>:DPHY:SIGNal? query.
Using the .verify(value) method will send the BUS:B<x>:DPHY:SIGNal? query and raise an AssertionError if the returned value does not match value.

Info

B<x> is the Bus number.

Properties

.encoding: The BUS:B<x>:DPHY:SIGNal:ENCoding command.

encoding `property` ¶

encoding: BusBItemDphySignalEncoding

Return the BUS:B<x>:DPHY:SIGNal:ENCoding command.

Description

This command sets or queries the 8b9b encoding for DPHY bus decode. By default 8b9b encoding is set to false. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:DPHY:SIGNal:ENCoding? query.
Using the .verify(value) method will send the BUS:B<x>:DPHY:SIGNal:ENCoding? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:DPHY:SIGNal:ENCoding value command.

SCPI Syntax

- BUS:B<x>:DPHY:SIGNal:ENCoding {false|true}
- BUS:B<x>:DPHY:SIGNal:ENCoding?

Info

B<x> is the Bus number.
false specifies the 8b9b encoding disabled.
true specifies 8b9b encoding disabled.

BusBItemDphySignalEncoding ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:DPHY:SIGNal:ENCoding command.

Description

This command sets or queries the 8b9b encoding for DPHY bus decode. By default 8b9b encoding is set to false. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:DPHY:SIGNal:ENCoding? query.
Using the .verify(value) method will send the BUS:B<x>:DPHY:SIGNal:ENCoding? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:DPHY:SIGNal:ENCoding value command.

SCPI Syntax

- BUS:B<x>:DPHY:SIGNal:ENCoding {false|true}
- BUS:B<x>:DPHY:SIGNal:ENCoding?

Info

B<x> is the Bus number.
false specifies the 8b9b encoding disabled.
true specifies 8b9b encoding disabled.

BusBItemEspi ¶

Bases: SCPICmdRead

The BUS:B<x>:ESPI command tree.

Usage

Using the .query() method will send the BUS:B<x>:ESPI? query.
Using the .verify(value) method will send the BUS:B<x>:ESPI? query and raise an AssertionError if the returned value does not match value.

Info

B<x> is the Bus number.

Properties

.alertview: The BUS:B<x>:ESPI:ALERTVIEW command.
.alert: The BUS:B<x>:ESPI:ALERt command tree.
.chipselect: The BUS:B<x>:ESPI:CHIPSELect command tree.
.clock: The BUS:B<x>:ESPI:CLOCk command tree.
.dataone: The BUS:B<x>:ESPI:DATAONE command tree.
.datatwo: The BUS:B<x>:ESPI:DATATWO command tree.
.iomode: The BUS:B<x>:ESPI:IOMODe command.

alert `property` ¶

alert: BusBItemEspiAlert

Return the BUS:B<x>:ESPI:ALERt command tree.

Usage

Using the .query() method will send the BUS:B<x>:ESPI:ALERt? query.
Using the .verify(value) method will send the BUS:B<x>:ESPI:ALERt? query and raise an AssertionError if the returned value does not match value.

Info

B<x> is the Bus number.

Sub-properties

.polarity: The BUS:B<x>:ESPI:ALERt:POLarity command.
.source: The BUS:B<x>:ESPI:ALERt:SOUrce command.
.threshold: The BUS:B<x>:ESPI:ALERt:THReshold command.

alertview `property` ¶

alertview: BusBItemEspiAlertview

Return the BUS:B<x>:ESPI:ALERTVIEW command.

Description

This command sets or queries the ESPI alert view for the specified bus. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:ESPI:ALERTVIEW? query.
Using the .verify(value) method will send the BUS:B<x>:ESPI:ALERTVIEW? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:ESPI:ALERTVIEW value command.

SCPI Syntax

- BUS:B<x>:ESPI:ALERTVIEW {ON|OFF}
- BUS:B<x>:ESPI:ALERTVIEW?

Info

B<x> is the Bus number.
ON turns the alert source on.
OFF turns the alert source on.

chipselect `property` ¶

chipselect: BusBItemEspiChipselect

Return the BUS:B<x>:ESPI:CHIPSELect command tree.

Usage

Using the .query() method will send the BUS:B<x>:ESPI:CHIPSELect? query.
Using the .verify(value) method will send the BUS:B<x>:ESPI:CHIPSELect? query and raise an AssertionError if the returned value does not match value.

Info

B<x> is the Bus number.

Sub-properties

.polarity: The BUS:B<x>:ESPI:CHIPSELect:POLarity command.
.source: The BUS:B<x>:ESPI:CHIPSELect:SOUrce command.
.threshold: The BUS:B<x>:ESPI:CHIPSELect:THReshold command.

clock `property` ¶

clock: BusBItemEspiClock

Return the BUS:B<x>:ESPI:CLOCk command tree.

Usage

Using the .query() method will send the BUS:B<x>:ESPI:CLOCk? query.
Using the .verify(value) method will send the BUS:B<x>:ESPI:CLOCk? query and raise an AssertionError if the returned value does not match value.

Info

B<x> is the Bus number.

Sub-properties

.polarity: The BUS:B<x>:ESPI:CLOCk:POLarity command.
.source: The BUS:B<x>:ESPI:CLOCk:SOUrce command.
.threshold: The BUS:B<x>:ESPI:CLOCk:THReshold command.

dataone `property` ¶

dataone: BusBItemEspiDataone

Return the BUS:B<x>:ESPI:DATAONE command tree.

Usage

Using the .query() method will send the BUS:B<x>:ESPI:DATAONE? query.
Using the .verify(value) method will send the BUS:B<x>:ESPI:DATAONE? query and raise an AssertionError if the returned value does not match value.

Info

B<x> is the Bus number.

Sub-properties

.polarity: The BUS:B<x>:ESPI:DATAONE:POLarity command.
.source: The BUS:B<x>:ESPI:DATAONE:SOUrce command.
.threshold: The BUS:B<x>:ESPI:DATAONE:THReshold command.

datatwo `property` ¶

datatwo: BusBItemEspiDatatwo

Return the BUS:B<x>:ESPI:DATATWO command tree.

Usage

Using the .query() method will send the BUS:B<x>:ESPI:DATATWO? query.
Using the .verify(value) method will send the BUS:B<x>:ESPI:DATATWO? query and raise an AssertionError if the returned value does not match value.

Info

B<x> is the Bus number.

Sub-properties

.polarity: The BUS:B<x>:ESPI:DATATWO:POLarity command.
.source: The BUS:B<x>:ESPI:DATATWO:SOUrce command.
.threshold: The BUS:B<x>:ESPI:DATATWO:THReshold command.

iomode `property` ¶

iomode: BusBItemEspiIomode

Return the BUS:B<x>:ESPI:IOMODe command.

Description

This command sets or queries the ESPI Input/Output mode for the specified bus. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:ESPI:IOMODe? query.
Using the .verify(value) method will send the BUS:B<x>:ESPI:IOMODe? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:ESPI:IOMODe value command.

SCPI Syntax

- BUS:B<x>:ESPI:IOMODe {SINGle|DUAL}
- BUS:B<x>:ESPI:IOMODe?

Info

B<x> is the Bus number.
SINGle displays the command and response decode in two lanes.
DUAL displays the decode in a single data lane.

BusBItemEspiAlert ¶

Bases: SCPICmdRead

The BUS:B<x>:ESPI:ALERt command tree.

Usage

Using the .query() method will send the BUS:B<x>:ESPI:ALERt? query.
Using the .verify(value) method will send the BUS:B<x>:ESPI:ALERt? query and raise an AssertionError if the returned value does not match value.

Info

B<x> is the Bus number.

Properties

.polarity: The BUS:B<x>:ESPI:ALERt:POLarity command.
.source: The BUS:B<x>:ESPI:ALERt:SOUrce command.
.threshold: The BUS:B<x>:ESPI:ALERt:THReshold command.

polarity `property` ¶

polarity: BusBItemEspiAlertPolarity

Return the BUS:B<x>:ESPI:ALERt:POLarity command.

Description

This command sets or queries the ESPI alert polarity for the specified bus. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:ESPI:ALERt:POLarity? query.
Using the .verify(value) method will send the BUS:B<x>:ESPI:ALERt:POLarity? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:ESPI:ALERt:POLarity value command.

SCPI Syntax

- BUS:B<x>:ESPI:ALERt:POLarity {HIGH|LOW}
- BUS:B<x>:ESPI:ALERt:POLarity?

Info

B<x> is the Bus number.
HIGH sets the ESPI alert polarity to active high.
LOW sets the ESPI alert polarity to active low.

source `property` ¶

source: BusBItemEspiAlertSource

Return the BUS:B<x>:ESPI:ALERt:SOUrce command.

Description

This command sets or queries the alert source for the specified bus. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:ESPI:ALERt:SOUrce? query.
Using the .verify(value) method will send the BUS:B<x>:ESPI:ALERt:SOUrce? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:ESPI:ALERt:SOUrce value command.

SCPI Syntax

- BUS:B<x>:ESPI:ALERt:SOUrce {S<x>_Ch<x>|CH<x>|MATH<x>|REF<x<>}
- BUS:B<x>:ESPI:ALERt:SOUrce?

Info

S<x>_Ch<x> specifies the remote scope number and the analog channel as the source.
CH<x> specifies an analog channel as the source.
Math<x> specifies a math waveform as the source.
REF<x> specifies a reference waveform as the source.

threshold `property` ¶

threshold: BusBItemEspiAlertThreshold

Return the BUS:B<x>:ESPI:ALERt:THReshold command.

Description

This command sets or queries the alert source threshold for the specified bus. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:ESPI:ALERt:THReshold? query.
Using the .verify(value) method will send the BUS:B<x>:ESPI:ALERt:THReshold? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:ESPI:ALERt:THReshold value command.

SCPI Syntax

- BUS:B<x>:ESPI:ALERt:THReshold <NR3>
- BUS:B<x>:ESPI:ALERt:THReshold?

Info

B<x> is the Bus number.
<NR3> sets the alert threshold for the specified bus. The valid range is -8V to +8V.

BusBItemEspiAlertPolarity ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:ESPI:ALERt:POLarity command.

Description

This command sets or queries the ESPI alert polarity for the specified bus. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:ESPI:ALERt:POLarity? query.
Using the .verify(value) method will send the BUS:B<x>:ESPI:ALERt:POLarity? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:ESPI:ALERt:POLarity value command.

SCPI Syntax

- BUS:B<x>:ESPI:ALERt:POLarity {HIGH|LOW}
- BUS:B<x>:ESPI:ALERt:POLarity?

Info

B<x> is the Bus number.
HIGH sets the ESPI alert polarity to active high.
LOW sets the ESPI alert polarity to active low.

BusBItemEspiAlertSource ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:ESPI:ALERt:SOUrce command.

Description

This command sets or queries the alert source for the specified bus. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:ESPI:ALERt:SOUrce? query.
Using the .verify(value) method will send the BUS:B<x>:ESPI:ALERt:SOUrce? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:ESPI:ALERt:SOUrce value command.

SCPI Syntax

- BUS:B<x>:ESPI:ALERt:SOUrce {S<x>_Ch<x>|CH<x>|MATH<x>|REF<x<>}
- BUS:B<x>:ESPI:ALERt:SOUrce?

Info

S<x>_Ch<x> specifies the remote scope number and the analog channel as the source.
CH<x> specifies an analog channel as the source.
Math<x> specifies a math waveform as the source.
REF<x> specifies a reference waveform as the source.

BusBItemEspiAlertThreshold ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:ESPI:ALERt:THReshold command.

Description

This command sets or queries the alert source threshold for the specified bus. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:ESPI:ALERt:THReshold? query.
Using the .verify(value) method will send the BUS:B<x>:ESPI:ALERt:THReshold? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:ESPI:ALERt:THReshold value command.

SCPI Syntax

- BUS:B<x>:ESPI:ALERt:THReshold <NR3>
- BUS:B<x>:ESPI:ALERt:THReshold?

Info

B<x> is the Bus number.
<NR3> sets the alert threshold for the specified bus. The valid range is -8V to +8V.

BusBItemEspiAlertview ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:ESPI:ALERTVIEW command.

Description

This command sets or queries the ESPI alert view for the specified bus. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:ESPI:ALERTVIEW? query.
Using the .verify(value) method will send the BUS:B<x>:ESPI:ALERTVIEW? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:ESPI:ALERTVIEW value command.

SCPI Syntax

- BUS:B<x>:ESPI:ALERTVIEW {ON|OFF}
- BUS:B<x>:ESPI:ALERTVIEW?

Info

B<x> is the Bus number.
ON turns the alert source on.
OFF turns the alert source on.

BusBItemEspiChipselect ¶

Bases: SCPICmdRead

The BUS:B<x>:ESPI:CHIPSELect command tree.

Usage

Using the .query() method will send the BUS:B<x>:ESPI:CHIPSELect? query.
Using the .verify(value) method will send the BUS:B<x>:ESPI:CHIPSELect? query and raise an AssertionError if the returned value does not match value.

Info

B<x> is the Bus number.

Properties

.polarity: The BUS:B<x>:ESPI:CHIPSELect:POLarity command.
.source: The BUS:B<x>:ESPI:CHIPSELect:SOUrce command.
.threshold: The BUS:B<x>:ESPI:CHIPSELect:THReshold command.

polarity `property` ¶

polarity: BusBItemEspiChipselectPolarity

Return the BUS:B<x>:ESPI:CHIPSELect:POLarity command.

Description

This command sets or queries the ESPI chip select polarity for the specified bus. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:ESPI:CHIPSELect:POLarity? query.
Using the .verify(value) method will send the BUS:B<x>:ESPI:CHIPSELect:POLarity? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:ESPI:CHIPSELect:POLarity value command.

SCPI Syntax

- BUS:B<x>:ESPI:CHIPSELect:POLarity {HIGH|LOW}
- BUS:B<x>:ESPI:CHIPSELect:POLarity?

Info

B<x> is the Bus number.
HIGH sets the ESPI chip select polarity to active high.
LOW sets the ESPI chip select polarity to active low.

source `property` ¶

source: BusBItemEspiChipselectSource

Return the BUS:B<x>:ESPI:CHIPSELect:SOUrce command.

Description

This command sets or queries the chip select source for the specified bus. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:ESPI:CHIPSELect:SOUrce? query.
Using the .verify(value) method will send the BUS:B<x>:ESPI:CHIPSELect:SOUrce? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:ESPI:CHIPSELect:SOUrce value command.

SCPI Syntax

- BUS:B<x>:ESPI:CHIPSELect:SOUrce {S<x>_Ch<x>|CH<x>|MATH<x>|REF<x<>}
- BUS:B<x>:ESPI:CHIPSELect:SOUrce?

Info

S<x>_Ch<x> specifies the remote scope number and the analog channel as the source.
CH<x> specifies an analog channel as the source.
Math<x> specifies a math waveform as the source.
REF<x> specifies a reference waveform as the source.

threshold `property` ¶

threshold: BusBItemEspiChipselectThreshold

Return the BUS:B<x>:ESPI:CHIPSELect:THReshold command.

Description

This command sets or queries the chip select source threshold for the specified bus. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:ESPI:CHIPSELect:THReshold? query.
Using the .verify(value) method will send the BUS:B<x>:ESPI:CHIPSELect:THReshold? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:ESPI:CHIPSELect:THReshold value command.

SCPI Syntax

- BUS:B<x>:ESPI:CHIPSELect:THReshold <NR3>
- BUS:B<x>:ESPI:CHIPSELect:THReshold?

Info

B<x> is the Bus number.
<NR3> sets the chip select threshold for the specified bus. The valid range is -8V to +8V.

BusBItemEspiChipselectPolarity ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:ESPI:CHIPSELect:POLarity command.

Description

This command sets or queries the ESPI chip select polarity for the specified bus. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:ESPI:CHIPSELect:POLarity? query.
Using the .verify(value) method will send the BUS:B<x>:ESPI:CHIPSELect:POLarity? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:ESPI:CHIPSELect:POLarity value command.

SCPI Syntax

- BUS:B<x>:ESPI:CHIPSELect:POLarity {HIGH|LOW}
- BUS:B<x>:ESPI:CHIPSELect:POLarity?

Info

B<x> is the Bus number.
HIGH sets the ESPI chip select polarity to active high.
LOW sets the ESPI chip select polarity to active low.

BusBItemEspiChipselectSource ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:ESPI:CHIPSELect:SOUrce command.

Description

This command sets or queries the chip select source for the specified bus. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:ESPI:CHIPSELect:SOUrce? query.
Using the .verify(value) method will send the BUS:B<x>:ESPI:CHIPSELect:SOUrce? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:ESPI:CHIPSELect:SOUrce value command.

SCPI Syntax

- BUS:B<x>:ESPI:CHIPSELect:SOUrce {S<x>_Ch<x>|CH<x>|MATH<x>|REF<x<>}
- BUS:B<x>:ESPI:CHIPSELect:SOUrce?

Info

S<x>_Ch<x> specifies the remote scope number and the analog channel as the source.
CH<x> specifies an analog channel as the source.
Math<x> specifies a math waveform as the source.
REF<x> specifies a reference waveform as the source.

BusBItemEspiChipselectThreshold ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:ESPI:CHIPSELect:THReshold command.

Description

This command sets or queries the chip select source threshold for the specified bus. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:ESPI:CHIPSELect:THReshold? query.
Using the .verify(value) method will send the BUS:B<x>:ESPI:CHIPSELect:THReshold? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:ESPI:CHIPSELect:THReshold value command.

SCPI Syntax

- BUS:B<x>:ESPI:CHIPSELect:THReshold <NR3>
- BUS:B<x>:ESPI:CHIPSELect:THReshold?

Info

B<x> is the Bus number.
<NR3> sets the chip select threshold for the specified bus. The valid range is -8V to +8V.

BusBItemEspiClock ¶

Bases: SCPICmdRead

The BUS:B<x>:ESPI:CLOCk command tree.

Usage

Using the .query() method will send the BUS:B<x>:ESPI:CLOCk? query.
Using the .verify(value) method will send the BUS:B<x>:ESPI:CLOCk? query and raise an AssertionError if the returned value does not match value.

Info

B<x> is the Bus number.

Properties

.polarity: The BUS:B<x>:ESPI:CLOCk:POLarity command.
.source: The BUS:B<x>:ESPI:CLOCk:SOUrce command.
.threshold: The BUS:B<x>:ESPI:CLOCk:THReshold command.

polarity `property` ¶

polarity: BusBItemEspiClockPolarity

Return the BUS:B<x>:ESPI:CLOCk:POLarity command.

Description

This command sets or queries the ESPI Clock (SCLK) source polarity for the specified bus. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:ESPI:CLOCk:POLarity? query.
Using the .verify(value) method will send the BUS:B<x>:ESPI:CLOCk:POLarity? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:ESPI:CLOCk:POLarity value command.

SCPI Syntax

- BUS:B<x>:ESPI:CLOCk:POLarity {FALL|RISE}
- BUS:B<x>:ESPI:CLOCk:POLarity?

Info

B<x> is the Bus number.
FALL sets the ESPI clock polarity to fall.
RISE sets the ESPI clock polarity to rise.

source `property` ¶

source: BusBItemEspiClockSource

Return the BUS:B<x>:ESPI:CLOCk:SOUrce command.

Description

This command sets or queries the Clock source for the specified bus. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:ESPI:CLOCk:SOUrce? query.
Using the .verify(value) method will send the BUS:B<x>:ESPI:CLOCk:SOUrce? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:ESPI:CLOCk:SOUrce value command.

SCPI Syntax

- BUS:B<x>:ESPI:CLOCk:SOUrce {S<x>_Ch<x>|CH<x>|MATH<x>|REF<x<>}
- BUS:B<x>:ESPI:CLOCk:SOUrce?

Info

S<x>_Ch<x> specifies the remote scope number and the analog channel as the source.
CH<x> specifies an analog channel as the source.
Math<x> specifies a math waveform as the source.
REF<x> specifies a reference waveform as the source.

threshold `property` ¶

threshold: BusBItemEspiClockThreshold

Return the BUS:B<x>:ESPI:CLOCk:THReshold command.

Description

This command sets or queries the Clock source threshold for the specified bus. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:ESPI:CLOCk:THReshold? query.
Using the .verify(value) method will send the BUS:B<x>:ESPI:CLOCk:THReshold? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:ESPI:CLOCk:THReshold value command.

SCPI Syntax

- BUS:B<x>:ESPI:CLOCk:THReshold <NR3>
- BUS:B<x>:ESPI:CLOCk:THReshold?

Info

B<x> is the Bus number.
<NR3> sets the clock threshold for the specified bus. The valid range is -8V to +8V.

BusBItemEspiClockPolarity ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:ESPI:CLOCk:POLarity command.

Description

This command sets or queries the ESPI Clock (SCLK) source polarity for the specified bus. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:ESPI:CLOCk:POLarity? query.
Using the .verify(value) method will send the BUS:B<x>:ESPI:CLOCk:POLarity? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:ESPI:CLOCk:POLarity value command.

SCPI Syntax

- BUS:B<x>:ESPI:CLOCk:POLarity {FALL|RISE}
- BUS:B<x>:ESPI:CLOCk:POLarity?

Info

B<x> is the Bus number.
FALL sets the ESPI clock polarity to fall.
RISE sets the ESPI clock polarity to rise.

BusBItemEspiClockSource ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:ESPI:CLOCk:SOUrce command.

Description

This command sets or queries the Clock source for the specified bus. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:ESPI:CLOCk:SOUrce? query.
Using the .verify(value) method will send the BUS:B<x>:ESPI:CLOCk:SOUrce? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:ESPI:CLOCk:SOUrce value command.

SCPI Syntax

- BUS:B<x>:ESPI:CLOCk:SOUrce {S<x>_Ch<x>|CH<x>|MATH<x>|REF<x<>}
- BUS:B<x>:ESPI:CLOCk:SOUrce?

Info

S<x>_Ch<x> specifies the remote scope number and the analog channel as the source.
CH<x> specifies an analog channel as the source.
Math<x> specifies a math waveform as the source.
REF<x> specifies a reference waveform as the source.

BusBItemEspiClockThreshold ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:ESPI:CLOCk:THReshold command.

Description

This command sets or queries the Clock source threshold for the specified bus. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:ESPI:CLOCk:THReshold? query.
Using the .verify(value) method will send the BUS:B<x>:ESPI:CLOCk:THReshold? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:ESPI:CLOCk:THReshold value command.

SCPI Syntax

- BUS:B<x>:ESPI:CLOCk:THReshold <NR3>
- BUS:B<x>:ESPI:CLOCk:THReshold?

Info

B<x> is the Bus number.
<NR3> sets the clock threshold for the specified bus. The valid range is -8V to +8V.

BusBItemEspiDataone ¶

Bases: SCPICmdRead

The BUS:B<x>:ESPI:DATAONE command tree.

Usage

Using the .query() method will send the BUS:B<x>:ESPI:DATAONE? query.
Using the .verify(value) method will send the BUS:B<x>:ESPI:DATAONE? query and raise an AssertionError if the returned value does not match value.

Info

B<x> is the Bus number.

Properties

.polarity: The BUS:B<x>:ESPI:DATAONE:POLarity command.
.source: The BUS:B<x>:ESPI:DATAONE:SOUrce command.
.threshold: The BUS:B<x>:ESPI:DATAONE:THReshold command.

polarity `property` ¶

polarity: BusBItemEspiDataonePolarity

Return the BUS:B<x>:ESPI:DATAONE:POLarity command.

Description

This command sets or queries the ESPI command (single mode)/ IO[0] (dual mode) polarity for the specified bus. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:ESPI:DATAONE:POLarity? query.
Using the .verify(value) method will send the BUS:B<x>:ESPI:DATAONE:POLarity? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:ESPI:DATAONE:POLarity value command.

SCPI Syntax

- BUS:B<x>:ESPI:DATAONE:POLarity {HIGH|LOW}
- BUS:B<x>:ESPI:DATAONE:POLarity?

Info

B<x> is the Bus number.
HIGH sets the ESPI data polarity to active high.
LOW sets the ESPI data polarity to active low.

source `property` ¶

source: BusBItemEspiDataoneSource

Return the BUS:B<x>:ESPI:DATAONE:SOUrce command.

Description

This command sets or queries the command (single mode)/ IO[0] (dual mode) Data source for the specified bus. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:ESPI:DATAONE:SOUrce? query.
Using the .verify(value) method will send the BUS:B<x>:ESPI:DATAONE:SOUrce? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:ESPI:DATAONE:SOUrce value command.

SCPI Syntax

- BUS:B<x>:ESPI:DATAONE:SOUrce {S<x>_Ch<x>|CH<x>|MATH<x>|REF<x<>}
- BUS:B<x>:ESPI:DATAONE:SOUrce?

Info

S<x>_Ch<x> specifies the remote scope number and the analog channel as the source.
CH<x> specifies an analog channel as the source.
Math<x> specifies a math waveform as the source.
REF<x> specifies a reference waveform as the source.

threshold `property` ¶

threshold: BusBItemEspiDataoneThreshold

Return the BUS:B<x>:ESPI:DATAONE:THReshold command.

Description

This command sets or queries the command (single mode)/ IO[0] (dual mode) Data source threshold for the specified bus. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:ESPI:DATAONE:THReshold? query.
Using the .verify(value) method will send the BUS:B<x>:ESPI:DATAONE:THReshold? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:ESPI:DATAONE:THReshold value command.

SCPI Syntax

- BUS:B<x>:ESPI:DATAONE:THReshold <NR3>
- BUS:B<x>:ESPI:DATAONE:THReshold?

Info

B<x> is the Bus number.
<NR3> sets the command/data threshold for the specified bus. The valid range is -8V to +8V.

BusBItemEspiDataonePolarity ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:ESPI:DATAONE:POLarity command.

Description

This command sets or queries the ESPI command (single mode)/ IO[0] (dual mode) polarity for the specified bus. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:ESPI:DATAONE:POLarity? query.
Using the .verify(value) method will send the BUS:B<x>:ESPI:DATAONE:POLarity? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:ESPI:DATAONE:POLarity value command.

SCPI Syntax

- BUS:B<x>:ESPI:DATAONE:POLarity {HIGH|LOW}
- BUS:B<x>:ESPI:DATAONE:POLarity?

Info

B<x> is the Bus number.
HIGH sets the ESPI data polarity to active high.
LOW sets the ESPI data polarity to active low.

BusBItemEspiDataoneSource ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:ESPI:DATAONE:SOUrce command.

Description

This command sets or queries the command (single mode)/ IO[0] (dual mode) Data source for the specified bus. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:ESPI:DATAONE:SOUrce? query.
Using the .verify(value) method will send the BUS:B<x>:ESPI:DATAONE:SOUrce? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:ESPI:DATAONE:SOUrce value command.

SCPI Syntax

- BUS:B<x>:ESPI:DATAONE:SOUrce {S<x>_Ch<x>|CH<x>|MATH<x>|REF<x<>}
- BUS:B<x>:ESPI:DATAONE:SOUrce?

Info

S<x>_Ch<x> specifies the remote scope number and the analog channel as the source.
CH<x> specifies an analog channel as the source.
Math<x> specifies a math waveform as the source.
REF<x> specifies a reference waveform as the source.

BusBItemEspiDataoneThreshold ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:ESPI:DATAONE:THReshold command.

Description

This command sets or queries the command (single mode)/ IO[0] (dual mode) Data source threshold for the specified bus. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:ESPI:DATAONE:THReshold? query.
Using the .verify(value) method will send the BUS:B<x>:ESPI:DATAONE:THReshold? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:ESPI:DATAONE:THReshold value command.

SCPI Syntax

- BUS:B<x>:ESPI:DATAONE:THReshold <NR3>
- BUS:B<x>:ESPI:DATAONE:THReshold?

Info

B<x> is the Bus number.
<NR3> sets the command/data threshold for the specified bus. The valid range is -8V to +8V.

BusBItemEspiDatatwo ¶

Bases: SCPICmdRead

The BUS:B<x>:ESPI:DATATWO command tree.

Usage

Using the .query() method will send the BUS:B<x>:ESPI:DATATWO? query.
Using the .verify(value) method will send the BUS:B<x>:ESPI:DATATWO? query and raise an AssertionError if the returned value does not match value.

Info

B<x> is the Bus number.

Properties

.polarity: The BUS:B<x>:ESPI:DATATWO:POLarity command.
.source: The BUS:B<x>:ESPI:DATATWO:SOUrce command.
.threshold: The BUS:B<x>:ESPI:DATATWO:THReshold command.

polarity `property` ¶

polarity: BusBItemEspiDatatwoPolarity

Return the BUS:B<x>:ESPI:DATATWO:POLarity command.

Description

This command sets or queries the ESPI response (single mode)/ IO[1] (dual mode) polarity for the specified bus. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:ESPI:DATATWO:POLarity? query.
Using the .verify(value) method will send the BUS:B<x>:ESPI:DATATWO:POLarity? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:ESPI:DATATWO:POLarity value command.

SCPI Syntax

- BUS:B<x>:ESPI:DATATWO:POLarity {HIGH|LOW}
- BUS:B<x>:ESPI:DATATWO:POLarity?

Info

B<x> is the Bus number.
HIGH sets the ESPI data polarity to active high.
LOW sets the ESPI data polarity to active low.

source `property` ¶

source: BusBItemEspiDatatwoSource

Return the BUS:B<x>:ESPI:DATATWO:SOUrce command.

Description

This command sets or queries the response (single mode)/ IO[1] (dual mode) Data source for the specified bus. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:ESPI:DATATWO:SOUrce? query.
Using the .verify(value) method will send the BUS:B<x>:ESPI:DATATWO:SOUrce? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:ESPI:DATATWO:SOUrce value command.

SCPI Syntax

- BUS:B<x>:ESPI:DATATWO:SOUrce {S<x>_Ch<x>|CH<x>|MATH<x>|REF<x<>}
- BUS:B<x>:ESPI:DATATWO:SOUrce?

Info

S<x>_Ch<x> specifies the remote scope number and the analog channel as the source.
CH<x> specifies an analog channel as the source.
Math<x> specifies a math waveform as the source.
REF<x> specifies a reference waveform as the source.

threshold `property` ¶

threshold: BusBItemEspiDatatwoThreshold

Return the BUS:B<x>:ESPI:DATATWO:THReshold command.

Description

This command sets or queries the response (single mode)/ IO[1] (dual mode) Data source threshold for the specified bus. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:ESPI:DATATWO:THReshold? query.
Using the .verify(value) method will send the BUS:B<x>:ESPI:DATATWO:THReshold? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:ESPI:DATATWO:THReshold value command.

SCPI Syntax

- BUS:B<x>:ESPI:DATATWO:THReshold <NR3>
- BUS:B<x>:ESPI:DATATWO:THReshold?

Info

B<x> is the Bus number.
<NR3> sets the command/data threshold for the specified bus. The valid range is -8V to +8V.

BusBItemEspiDatatwoPolarity ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:ESPI:DATATWO:POLarity command.

Description

This command sets or queries the ESPI response (single mode)/ IO[1] (dual mode) polarity for the specified bus. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:ESPI:DATATWO:POLarity? query.
Using the .verify(value) method will send the BUS:B<x>:ESPI:DATATWO:POLarity? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:ESPI:DATATWO:POLarity value command.

SCPI Syntax

- BUS:B<x>:ESPI:DATATWO:POLarity {HIGH|LOW}
- BUS:B<x>:ESPI:DATATWO:POLarity?

Info

B<x> is the Bus number.
HIGH sets the ESPI data polarity to active high.
LOW sets the ESPI data polarity to active low.

BusBItemEspiDatatwoSource ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:ESPI:DATATWO:SOUrce command.

Description

This command sets or queries the response (single mode)/ IO[1] (dual mode) Data source for the specified bus. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:ESPI:DATATWO:SOUrce? query.
Using the .verify(value) method will send the BUS:B<x>:ESPI:DATATWO:SOUrce? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:ESPI:DATATWO:SOUrce value command.

SCPI Syntax

- BUS:B<x>:ESPI:DATATWO:SOUrce {S<x>_Ch<x>|CH<x>|MATH<x>|REF<x<>}
- BUS:B<x>:ESPI:DATATWO:SOUrce?

Info

S<x>_Ch<x> specifies the remote scope number and the analog channel as the source.
CH<x> specifies an analog channel as the source.
Math<x> specifies a math waveform as the source.
REF<x> specifies a reference waveform as the source.

BusBItemEspiDatatwoThreshold ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:ESPI:DATATWO:THReshold command.

Description

This command sets or queries the response (single mode)/ IO[1] (dual mode) Data source threshold for the specified bus. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:ESPI:DATATWO:THReshold? query.
Using the .verify(value) method will send the BUS:B<x>:ESPI:DATATWO:THReshold? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:ESPI:DATATWO:THReshold value command.

SCPI Syntax

- BUS:B<x>:ESPI:DATATWO:THReshold <NR3>
- BUS:B<x>:ESPI:DATATWO:THReshold?

Info

B<x> is the Bus number.
<NR3> sets the command/data threshold for the specified bus. The valid range is -8V to +8V.

BusBItemEspiIomode ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:ESPI:IOMODe command.

Description

This command sets or queries the ESPI Input/Output mode for the specified bus. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:ESPI:IOMODe? query.
Using the .verify(value) method will send the BUS:B<x>:ESPI:IOMODe? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:ESPI:IOMODe value command.

SCPI Syntax

- BUS:B<x>:ESPI:IOMODe {SINGle|DUAL}
- BUS:B<x>:ESPI:IOMODe?

Info

B<x> is the Bus number.
SINGle displays the command and response decode in two lanes.
DUAL displays the decode in a single data lane.

BusBItemEthercat ¶

Bases: SCPICmdRead

The BUS:B<x>:ETHERCAT command tree.

Usage

Using the .query() method will send the BUS:B<x>:ETHERCAT? query.
Using the .verify(value) method will send the BUS:B<x>:ETHERCAT? query and raise an AssertionError if the returned value does not match value.

Info

B<x> is the number of the bus.

Properties

.dataminusthreshold: The BUS:B<x>:ETHERCAT:DATAMINUSTHRESHold command.
.dataplusthreshold: The BUS:B<x>:ETHERCAT:DATAPLUSTHRESHold command.
.signaltype: The BUS:B<x>:ETHERCAT:SIGNALTYpe command.
.source: The BUS:B<x>:ETHERCAT:SOUrce command tree.
.threshold: The BUS:B<x>:ETHERCAT:THRESHold command.

dataminusthreshold `property` ¶

dataminusthreshold: BusBItemEthercatDataminusthreshold

Return the BUS:B<x>:ETHERCAT:DATAMINUSTHRESHold command.

Description

This command sets or queries the DATA Minus source threshold for the specified EtherCAT bus.

Usage

Using the .query() method will send the BUS:B<x>:ETHERCAT:DATAMINUSTHRESHold? query.
Using the .verify(value) method will send the BUS:B<x>:ETHERCAT:DATAMINUSTHRESHold? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:ETHERCAT:DATAMINUSTHRESHold value command.

SCPI Syntax

- BUS:B<x>:ETHERCAT:DATAMINUSTHRESHold <NR3>
- BUS:B<x>:ETHERCAT:DATAMINUSTHRESHold?

Info

B<x> is the number of the bus.
<NR3> is the EtherCAT DataMinus source threshold for the specified bus. The valid range is -8V to +8V. The default value is 0 V.

dataplusthreshold `property` ¶

dataplusthreshold: BusBItemEthercatDataplusthreshold

Return the BUS:B<x>:ETHERCAT:DATAPLUSTHRESHold command.

Description

This command sets or queries the DATA Plus source threshold for the specified EtherCAT bus.

Usage

Using the .query() method will send the BUS:B<x>:ETHERCAT:DATAPLUSTHRESHold? query.
Using the .verify(value) method will send the BUS:B<x>:ETHERCAT:DATAPLUSTHRESHold? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:ETHERCAT:DATAPLUSTHRESHold value command.

SCPI Syntax

- BUS:B<x>:ETHERCAT:DATAPLUSTHRESHold <NR3>
- BUS:B<x>:ETHERCAT:DATAPLUSTHRESHold?

Info

B<x> is the number of the bus.
<NR3> is the EtherCAT DataPinus source threshold for the specified bus. The valid range is -8V to +8V. The default value is 0 V.

signaltype `property` ¶

signaltype: BusBItemEthercatSignaltype

Return the BUS:B<x>:ETHERCAT:SIGNALTYpe command.

Description

This command sets or queries the signal type for the specified EtherCAT bus.

Usage

Using the .query() method will send the BUS:B<x>:ETHERCAT:SIGNALTYpe? query.
Using the .verify(value) method will send the BUS:B<x>:ETHERCAT:SIGNALTYpe? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:ETHERCAT:SIGNALTYpe value command.

SCPI Syntax

- BUS:B<x>:ETHERCAT:SIGNALTYpe {SINGLE|DIFF}
- BUS:B<x>:ETHERCAT:SIGNALTYpe?

Info

B<x> is the number of the bus.
SINGLE specifies single-ended signals.
DIFF specifies differential signals.

source `property` ¶

source: BusBItemEthercatSource

Return the BUS:B<x>:ETHERCAT:SOUrce command tree.

Usage

Using the .query() method will send the BUS:B<x>:ETHERCAT:SOUrce? query.
Using the .verify(value) method will send the BUS:B<x>:ETHERCAT:SOUrce? query and raise an AssertionError if the returned value does not match value.

Info

B<x> is the number of the bus.

Sub-properties

.diff: The BUS:B<x>:ETHERCAT:SOUrce:DIFF command.
.dminus: The BUS:B<x>:ETHERCAT:SOUrce:DMINus command.
.dplus: The BUS:B<x>:ETHERCAT:SOUrce:DPLUs command.

threshold `property` ¶

threshold: BusBItemEthercatThreshold

Return the BUS:B<x>:ETHERCAT:THRESHold command.

Description

This command sets or queries the differential source threshold for the specified EtherCAT bus.

Usage

Using the .query() method will send the BUS:B<x>:ETHERCAT:THRESHold? query.
Using the .verify(value) method will send the BUS:B<x>:ETHERCAT:THRESHold? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:ETHERCAT:THRESHold value command.

SCPI Syntax

- BUS:B<x>:ETHERCAT:THRESHold <NR3>
- BUS:B<x>:ETHERCAT:THRESHold?

Info

B<x> is the number of the bus.
<NR3> specifies the EtherCAT differential Source threshold for the specified bus. The default value is 0 V. The valid range is -8 V to +8 V.

BusBItemEthercatDataminusthreshold ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:ETHERCAT:DATAMINUSTHRESHold command.

Description

This command sets or queries the DATA Minus source threshold for the specified EtherCAT bus.

Usage

Using the .query() method will send the BUS:B<x>:ETHERCAT:DATAMINUSTHRESHold? query.
Using the .verify(value) method will send the BUS:B<x>:ETHERCAT:DATAMINUSTHRESHold? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:ETHERCAT:DATAMINUSTHRESHold value command.

SCPI Syntax

- BUS:B<x>:ETHERCAT:DATAMINUSTHRESHold <NR3>
- BUS:B<x>:ETHERCAT:DATAMINUSTHRESHold?

Info

B<x> is the number of the bus.
<NR3> is the EtherCAT DataMinus source threshold for the specified bus. The valid range is -8V to +8V. The default value is 0 V.

BusBItemEthercatDataplusthreshold ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:ETHERCAT:DATAPLUSTHRESHold command.

Description

This command sets or queries the DATA Plus source threshold for the specified EtherCAT bus.

Usage

Using the .query() method will send the BUS:B<x>:ETHERCAT:DATAPLUSTHRESHold? query.
Using the .verify(value) method will send the BUS:B<x>:ETHERCAT:DATAPLUSTHRESHold? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:ETHERCAT:DATAPLUSTHRESHold value command.

SCPI Syntax

- BUS:B<x>:ETHERCAT:DATAPLUSTHRESHold <NR3>
- BUS:B<x>:ETHERCAT:DATAPLUSTHRESHold?

Info

B<x> is the number of the bus.
<NR3> is the EtherCAT DataPinus source threshold for the specified bus. The valid range is -8V to +8V. The default value is 0 V.

BusBItemEthercatSignaltype ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:ETHERCAT:SIGNALTYpe command.

Description

This command sets or queries the signal type for the specified EtherCAT bus.

Usage

Using the .query() method will send the BUS:B<x>:ETHERCAT:SIGNALTYpe? query.
Using the .verify(value) method will send the BUS:B<x>:ETHERCAT:SIGNALTYpe? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:ETHERCAT:SIGNALTYpe value command.

SCPI Syntax

- BUS:B<x>:ETHERCAT:SIGNALTYpe {SINGLE|DIFF}
- BUS:B<x>:ETHERCAT:SIGNALTYpe?

Info

B<x> is the number of the bus.
SINGLE specifies single-ended signals.
DIFF specifies differential signals.

BusBItemEthercatSource ¶

Bases: SCPICmdRead

The BUS:B<x>:ETHERCAT:SOUrce command tree.

Usage

Using the .query() method will send the BUS:B<x>:ETHERCAT:SOUrce? query.
Using the .verify(value) method will send the BUS:B<x>:ETHERCAT:SOUrce? query and raise an AssertionError if the returned value does not match value.

Info

B<x> is the number of the bus.

Properties

.diff: The BUS:B<x>:ETHERCAT:SOUrce:DIFF command.
.dminus: The BUS:B<x>:ETHERCAT:SOUrce:DMINus command.
.dplus: The BUS:B<x>:ETHERCAT:SOUrce:DPLUs command.

diff `property` ¶

diff: BusBItemEthercatSourceDiff

Return the BUS:B<x>:ETHERCAT:SOUrce:DIFF command.

Description

This command sets or queries the differential source for the specified EtherCAT bus.

Usage

Using the .query() method will send the BUS:B<x>:ETHERCAT:SOUrce:DIFF? query.
Using the .verify(value) method will send the BUS:B<x>:ETHERCAT:SOUrce:DIFF? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:ETHERCAT:SOUrce:DIFF value command.

SCPI Syntax

- BUS:B<x>:ETHERCAT:SOUrce:DIFF {S<x>_Ch<x>|CH<x>|MATH<x>|REF<x>}
- BUS:B<x>:ETHERCAT:SOUrce:DIFF?

Info

B<x> is the number of the bus.
S<x>_Ch<x> specifies the remote scope number and the analog channel.
CH<x> specifies to use one of the analog channels as the differential source.
MATH<x> specifies to use a math waveform as the differential source.
REF<x> specifies to use one of the reference waveforms as the differential source.

dminus `property` ¶

dminus: BusBItemEthercatSourceDminus

Return the BUS:B<x>:ETHERCAT:SOUrce:DMINus command.

Description

This command sets or queries the DataMinus (SDATAMINUS) source for the specified EtherCAT bus.

Usage

Using the .query() method will send the BUS:B<x>:ETHERCAT:SOUrce:DMINus? query.
Using the .verify(value) method will send the BUS:B<x>:ETHERCAT:SOUrce:DMINus? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:ETHERCAT:SOUrce:DMINus value command.

SCPI Syntax

- BUS:B<x>:ETHERCAT:SOUrce:DMINus {S<x>_Ch<x>|CH<x>|MATH<x>|REF<x>}
- BUS:B<x>:ETHERCAT:SOUrce:DMINus?

Info

B<x> is the number of the bus.
S<x>_Ch<x> specifies the remote scope number and the analog channel.
CH<x> specifies to use one of the analog channels as the DataMinus source.
MATH<x> specifies to use a math waveform as the DataMinus source.
REF<x> specifies to use one of the reference waveforms as the DataMinus source.

dplus `property` ¶

dplus: BusBItemEthercatSourceDplus

Return the BUS:B<x>:ETHERCAT:SOUrce:DPLUs command.

Description

This command sets or queries the DataPlus (SDATAPLUS) source for the specified EtherCAT bus.

Usage

Using the .query() method will send the BUS:B<x>:ETHERCAT:SOUrce:DPLUs? query.
Using the .verify(value) method will send the BUS:B<x>:ETHERCAT:SOUrce:DPLUs? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:ETHERCAT:SOUrce:DPLUs value command.

SCPI Syntax

- BUS:B<x>:ETHERCAT:SOUrce:DPLUs {S<x>_Ch<x>|CH<x>|MATH<x>|REF<x>}
- BUS:B<x>:ETHERCAT:SOUrce:DPLUs?

Info

B<x> is the number of the bus.
S<x>_Ch<x> specifies the remote scope number and the analog channel.
CH<x> specifies to use one of the analog channels as the DataPlus source.
MATH<x> specifies to use a math waveform as the DataPlus source.
REF<x> specifies to use one of the reference waveforms as the DataPlus source.

BusBItemEthercatSourceDiff ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:ETHERCAT:SOUrce:DIFF command.

Description

This command sets or queries the differential source for the specified EtherCAT bus.

Usage

Using the .query() method will send the BUS:B<x>:ETHERCAT:SOUrce:DIFF? query.
Using the .verify(value) method will send the BUS:B<x>:ETHERCAT:SOUrce:DIFF? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:ETHERCAT:SOUrce:DIFF value command.

SCPI Syntax

- BUS:B<x>:ETHERCAT:SOUrce:DIFF {S<x>_Ch<x>|CH<x>|MATH<x>|REF<x>}
- BUS:B<x>:ETHERCAT:SOUrce:DIFF?

Info

B<x> is the number of the bus.
S<x>_Ch<x> specifies the remote scope number and the analog channel.
CH<x> specifies to use one of the analog channels as the differential source.
MATH<x> specifies to use a math waveform as the differential source.
REF<x> specifies to use one of the reference waveforms as the differential source.

BusBItemEthercatSourceDminus ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:ETHERCAT:SOUrce:DMINus command.

Description

This command sets or queries the DataMinus (SDATAMINUS) source for the specified EtherCAT bus.

Usage

Using the .query() method will send the BUS:B<x>:ETHERCAT:SOUrce:DMINus? query.
Using the .verify(value) method will send the BUS:B<x>:ETHERCAT:SOUrce:DMINus? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:ETHERCAT:SOUrce:DMINus value command.

SCPI Syntax

- BUS:B<x>:ETHERCAT:SOUrce:DMINus {S<x>_Ch<x>|CH<x>|MATH<x>|REF<x>}
- BUS:B<x>:ETHERCAT:SOUrce:DMINus?

Info

B<x> is the number of the bus.
S<x>_Ch<x> specifies the remote scope number and the analog channel.
CH<x> specifies to use one of the analog channels as the DataMinus source.
MATH<x> specifies to use a math waveform as the DataMinus source.
REF<x> specifies to use one of the reference waveforms as the DataMinus source.

BusBItemEthercatSourceDplus ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:ETHERCAT:SOUrce:DPLUs command.

Description

This command sets or queries the DataPlus (SDATAPLUS) source for the specified EtherCAT bus.

Usage

Using the .query() method will send the BUS:B<x>:ETHERCAT:SOUrce:DPLUs? query.
Using the .verify(value) method will send the BUS:B<x>:ETHERCAT:SOUrce:DPLUs? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:ETHERCAT:SOUrce:DPLUs value command.

SCPI Syntax

- BUS:B<x>:ETHERCAT:SOUrce:DPLUs {S<x>_Ch<x>|CH<x>|MATH<x>|REF<x>}
- BUS:B<x>:ETHERCAT:SOUrce:DPLUs?

Info

B<x> is the number of the bus.
S<x>_Ch<x> specifies the remote scope number and the analog channel.
CH<x> specifies to use one of the analog channels as the DataPlus source.
MATH<x> specifies to use a math waveform as the DataPlus source.
REF<x> specifies to use one of the reference waveforms as the DataPlus source.

BusBItemEthercatThreshold ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:ETHERCAT:THRESHold command.

Description

This command sets or queries the differential source threshold for the specified EtherCAT bus.

Usage

Using the .query() method will send the BUS:B<x>:ETHERCAT:THRESHold? query.
Using the .verify(value) method will send the BUS:B<x>:ETHERCAT:THRESHold? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:ETHERCAT:THRESHold value command.

SCPI Syntax

- BUS:B<x>:ETHERCAT:THRESHold <NR3>
- BUS:B<x>:ETHERCAT:THRESHold?

Info

B<x> is the number of the bus.
<NR3> specifies the EtherCAT differential Source threshold for the specified bus. The default value is 0 V. The valid range is -8 V to +8 V.

BusBItemEthernet ¶

Bases: SCPICmdRead

The BUS:B<x>:ETHERnet command tree.

Usage

Using the .query() method will send the BUS:B<x>:ETHERnet? query.
Using the .verify(value) method will send the BUS:B<x>:ETHERnet? query and raise an AssertionError if the returned value does not match value.

Info

B<x> is the number of the bus.

Properties

.dataminusthreshold: The BUS:B<x>:ETHERnet:DATAMINUSTHRESHold command.
.dataplusthreshold: The BUS:B<x>:ETHERnet:DATAPLUSTHRESHold command.
.ipvfour: The BUS:B<x>:ETHERnet:IPVFOUR command.
.lowthreshold: The BUS:B<x>:ETHERnet:LOWTHRESHold command.
.qtagging: The BUS:B<x>:ETHERnet:QTAGGING command.
.signaltype: The BUS:B<x>:ETHERnet:SIGNALTYpe command.
.source: The BUS:B<x>:ETHERnet:SOUrce command.
.threshold: The BUS:B<x>:ETHERnet:THRESHold command.
.type: The BUS:B<x>:ETHERnet:TYPe command.

dataminusthreshold `property` ¶

dataminusthreshold: BusBItemEthernetDataminusthreshold

Return the BUS:B<x>:ETHERnet:DATAMINUSTHRESHold command.

Description

This command sets or queries the Ethernet D- source threshold for the specified bus. This threshold only applies when the Ethernet signal type is single ended. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:ETHERnet:DATAMINUSTHRESHold? query.
Using the .verify(value) method will send the BUS:B<x>:ETHERnet:DATAMINUSTHRESHold? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:ETHERnet:DATAMINUSTHRESHold value command.

SCPI Syntax

- BUS:B<x>:ETHERnet:DATAMINUSTHRESHold <NR3>
- BUS:B<x>:ETHERnet:DATAMINUSTHRESHold?

Info

B<x> is the number of the bus.
<NR3> is the Ethernet D- source threshold for the specified bus.

dataplusthreshold `property` ¶

dataplusthreshold: BusBItemEthernetDataplusthreshold

Return the BUS:B<x>:ETHERnet:DATAPLUSTHRESHold command.

Description

This command sets or queries the Ethernet D+ source threshold for the specified bus. This threshold only applies when the Ethernet signal type is single ended. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:ETHERnet:DATAPLUSTHRESHold? query.
Using the .verify(value) method will send the BUS:B<x>:ETHERnet:DATAPLUSTHRESHold? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:ETHERnet:DATAPLUSTHRESHold value command.

SCPI Syntax

- BUS:B<x>:ETHERnet:DATAPLUSTHRESHold <NR3>
- BUS:B<x>:ETHERnet:DATAPLUSTHRESHold?

Info

B<x> is the Bus number.
<NR3> is the Ethernet D+ source threshold for the specified bus.

ipvfour `property` ¶

ipvfour: BusBItemEthernetIpvfour

Return the BUS:B<x>:ETHERnet:IPVFOUR command.

Description

This command sets or queries whether IPV4 packets are available for triggering on Ethernet. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:ETHERnet:IPVFOUR? query.
Using the .verify(value) method will send the BUS:B<x>:ETHERnet:IPVFOUR? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:ETHERnet:IPVFOUR value command.

SCPI Syntax

- BUS:B<x>:ETHERnet:IPVFOUR {YES|NO}
- BUS:B<x>:ETHERnet:IPVFOUR?

Info

B<x> is the number of the bus.
YES specifies that IPV4 packets are available.
NO specifies that IPV4 packets are not available.

lowthreshold `property` ¶

lowthreshold: BusBItemEthernetLowthreshold

Return the BUS:B<x>:ETHERnet:LOWTHRESHold command.

Description

This command sets or queries the Ethernet source Low threshold for the specified bus. This threshold only applies when the Ethernet signal type is differential. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:ETHERnet:LOWTHRESHold? query.
Using the .verify(value) method will send the BUS:B<x>:ETHERnet:LOWTHRESHold? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:ETHERnet:LOWTHRESHold value command.

SCPI Syntax

- BUS:B<x>:ETHERnet:LOWTHRESHold <NR3>
- BUS:B<x>:ETHERnet:LOWTHRESHold?

Info

B<x> is the number of the bus.
<NR3> is the Ethernet source Low threshold for the specified bus.

qtagging `property` ¶

qtagging: BusBItemEthernetQtagging

Return the BUS:B<x>:ETHERnet:QTAGGING command.

Description

This command sets or queries whether Q-Tagging packets are available for triggering on Ethernet. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:ETHERnet:QTAGGING? query.
Using the .verify(value) method will send the BUS:B<x>:ETHERnet:QTAGGING? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:ETHERnet:QTAGGING value command.

SCPI Syntax

- BUS:B<x>:ETHERnet:QTAGGING {YES|NO}
- BUS:B<x>:ETHERnet:QTAGGING?

Info

B<x> is the number of the bus.
YES specifies that Q-Tagging packets are available.
NO specifies that Q-Tagging packets are not available.

signaltype `property` ¶

signaltype: BusBItemEthernetSignaltype

Return the BUS:B<x>:ETHERnet:SIGNALTYpe command.

Description

This command sets or queries the Ethernet signal type for the specified bus. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:ETHERnet:SIGNALTYpe? query.
Using the .verify(value) method will send the BUS:B<x>:ETHERnet:SIGNALTYpe? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:ETHERnet:SIGNALTYpe value command.

SCPI Syntax

- BUS:B<x>:ETHERnet:SIGNALTYpe {SINGLE|DIFF}
- BUS:B<x>:ETHERnet:SIGNALTYpe?

Info

B<x> is the number of the bus.
SINGLE specifies single-ended signals.
DIFF specifies differential signals.

source `property` ¶

source: BusBItemEthernetSource

Return the BUS:B<x>:ETHERnet:SOUrce command.

Description

This command sets or queries the Ethernet data (SDATA) source for the specified bus. This command controls the source channel when the signal type is differential. The bus number is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:ETHERnet:SOUrce? query.
Using the .verify(value) method will send the BUS:B<x>:ETHERnet:SOUrce? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:ETHERnet:SOUrce value command.

SCPI Syntax

- BUS:B<x>:ETHERnet:SOUrce {S<x>_Ch<x>|CH<x>|MATH<x>|REF<x>}
- BUS:B<x>:ETHERnet:SOUrce?

Info

B<x> is the number of the bus.
S<x>_Ch<x> specifies the remote scope number and the analog channel.
CH<x> specifies to use one of the analog channels as the Ethernet data source for differential input.
MATH<x> specifies to use a math waveform as the source for Ethernet data differential input.
REF<x> specifies to use one of the reference waveforms as the Ethernet data source for differential input.

Sub-properties

.dminus: The BUS:B<x>:ETHERnet:SOUrce:DMINus command.
.dplus: The BUS:B<x>:ETHERnet:SOUrce:DPLUs command.

threshold `property` ¶

threshold: BusBItemEthernetThreshold

Return the BUS:B<x>:ETHERnet:THRESHold command.

Description

This command sets or queries the Ethernet DATA source High threshold for the specified bus. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:ETHERnet:THRESHold? query.
Using the .verify(value) method will send the BUS:B<x>:ETHERnet:THRESHold? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:ETHERnet:THRESHold value command.

SCPI Syntax

- BUS:B<x>:ETHERnet:THRESHold <NR3>
- BUS:B<x>:ETHERnet:THRESHold?

Info

B<x> is the number of the bus.
<NR3> is the Ethernet DATA source High threshold for the specified bus.

type `property` ¶

type: BusBItemEthernetType

Return the BUS:B<x>:ETHERnet:TYPe command.

Description

This command specifies the Ethernet standard speed. The bus number is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:ETHERnet:TYPe? query.
Using the .verify(value) method will send the BUS:B<x>:ETHERnet:TYPe? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:ETHERnet:TYPe value command.

SCPI Syntax

- BUS:B<x>:ETHERnet:TYPe {TENBASET|HUNDREDBASETX}
- BUS:B<x>:ETHERnet:TYPe?

Info

B<x> is the number of the bus.
TENBASET specifies the Ethernet speed as 10Base-T.
HUNDREDBASETX specifies the Ethernet speed as 100Base-T.

BusBItemEthernetDataminusthreshold ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:ETHERnet:DATAMINUSTHRESHold command.

Description

This command sets or queries the Ethernet D- source threshold for the specified bus. This threshold only applies when the Ethernet signal type is single ended. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:ETHERnet:DATAMINUSTHRESHold? query.
Using the .verify(value) method will send the BUS:B<x>:ETHERnet:DATAMINUSTHRESHold? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:ETHERnet:DATAMINUSTHRESHold value command.

SCPI Syntax

- BUS:B<x>:ETHERnet:DATAMINUSTHRESHold <NR3>
- BUS:B<x>:ETHERnet:DATAMINUSTHRESHold?

Info

B<x> is the number of the bus.
<NR3> is the Ethernet D- source threshold for the specified bus.

BusBItemEthernetDataplusthreshold ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:ETHERnet:DATAPLUSTHRESHold command.

Description

This command sets or queries the Ethernet D+ source threshold for the specified bus. This threshold only applies when the Ethernet signal type is single ended. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:ETHERnet:DATAPLUSTHRESHold? query.
Using the .verify(value) method will send the BUS:B<x>:ETHERnet:DATAPLUSTHRESHold? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:ETHERnet:DATAPLUSTHRESHold value command.

SCPI Syntax

- BUS:B<x>:ETHERnet:DATAPLUSTHRESHold <NR3>
- BUS:B<x>:ETHERnet:DATAPLUSTHRESHold?

Info

B<x> is the Bus number.
<NR3> is the Ethernet D+ source threshold for the specified bus.

BusBItemEthernetIpvfour ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:ETHERnet:IPVFOUR command.

Description

This command sets or queries whether IPV4 packets are available for triggering on Ethernet. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:ETHERnet:IPVFOUR? query.
Using the .verify(value) method will send the BUS:B<x>:ETHERnet:IPVFOUR? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:ETHERnet:IPVFOUR value command.

SCPI Syntax

- BUS:B<x>:ETHERnet:IPVFOUR {YES|NO}
- BUS:B<x>:ETHERnet:IPVFOUR?

Info

B<x> is the number of the bus.
YES specifies that IPV4 packets are available.
NO specifies that IPV4 packets are not available.

BusBItemEthernetLowthreshold ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:ETHERnet:LOWTHRESHold command.

Description

This command sets or queries the Ethernet source Low threshold for the specified bus. This threshold only applies when the Ethernet signal type is differential. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:ETHERnet:LOWTHRESHold? query.
Using the .verify(value) method will send the BUS:B<x>:ETHERnet:LOWTHRESHold? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:ETHERnet:LOWTHRESHold value command.

SCPI Syntax

- BUS:B<x>:ETHERnet:LOWTHRESHold <NR3>
- BUS:B<x>:ETHERnet:LOWTHRESHold?

Info

B<x> is the number of the bus.
<NR3> is the Ethernet source Low threshold for the specified bus.

BusBItemEthernetQtagging ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:ETHERnet:QTAGGING command.

Description

This command sets or queries whether Q-Tagging packets are available for triggering on Ethernet. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:ETHERnet:QTAGGING? query.
Using the .verify(value) method will send the BUS:B<x>:ETHERnet:QTAGGING? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:ETHERnet:QTAGGING value command.

SCPI Syntax

- BUS:B<x>:ETHERnet:QTAGGING {YES|NO}
- BUS:B<x>:ETHERnet:QTAGGING?

Info

B<x> is the number of the bus.
YES specifies that Q-Tagging packets are available.
NO specifies that Q-Tagging packets are not available.

BusBItemEthernetSignaltype ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:ETHERnet:SIGNALTYpe command.

Description

This command sets or queries the Ethernet signal type for the specified bus. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:ETHERnet:SIGNALTYpe? query.
Using the .verify(value) method will send the BUS:B<x>:ETHERnet:SIGNALTYpe? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:ETHERnet:SIGNALTYpe value command.

SCPI Syntax

- BUS:B<x>:ETHERnet:SIGNALTYpe {SINGLE|DIFF}
- BUS:B<x>:ETHERnet:SIGNALTYpe?

Info

B<x> is the number of the bus.
SINGLE specifies single-ended signals.
DIFF specifies differential signals.

BusBItemEthernetSource ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:ETHERnet:SOUrce command.

Description

This command sets or queries the Ethernet data (SDATA) source for the specified bus. This command controls the source channel when the signal type is differential. The bus number is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:ETHERnet:SOUrce? query.
Using the .verify(value) method will send the BUS:B<x>:ETHERnet:SOUrce? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:ETHERnet:SOUrce value command.

SCPI Syntax

- BUS:B<x>:ETHERnet:SOUrce {S<x>_Ch<x>|CH<x>|MATH<x>|REF<x>}
- BUS:B<x>:ETHERnet:SOUrce?

Info

B<x> is the number of the bus.
S<x>_Ch<x> specifies the remote scope number and the analog channel.
CH<x> specifies to use one of the analog channels as the Ethernet data source for differential input.
MATH<x> specifies to use a math waveform as the source for Ethernet data differential input.
REF<x> specifies to use one of the reference waveforms as the Ethernet data source for differential input.

Properties

.dminus: The BUS:B<x>:ETHERnet:SOUrce:DMINus command.
.dplus: The BUS:B<x>:ETHERnet:SOUrce:DPLUs command.

dminus `property` ¶

dminus: BusBItemEthernetSourceDminus

Return the BUS:B<x>:ETHERnet:SOUrce:DMINus command.

Description

This command sets or queries the Ethernet D- source for the specified bus. this command specifies the source channel to use when the signal type is single ended. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:ETHERnet:SOUrce:DMINus? query.
Using the .verify(value) method will send the BUS:B<x>:ETHERnet:SOUrce:DMINus? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:ETHERnet:SOUrce:DMINus value command.

SCPI Syntax

- BUS:B<x>:ETHERnet:SOUrce:DMINus {S<x>_Ch<x>|CH<x>|MATH<x>|REF<x>}
- BUS:B<x>:ETHERnet:SOUrce:DMINus?

Info

B<x> is the number of the bus.
S<x>_Ch<x> specifies the remote scope number and the analog channel as the source.
CH<x> specifies an analog channel as the source.
Math<x> specifies a math waveform as the source.
REF<x> specifies a reference waveform as the source.

dplus `property` ¶

dplus: BusBItemEthernetSourceDplus

Return the BUS:B<x>:ETHERnet:SOUrce:DPLUs command.

Description

This command sets or queries the Ethernet D+ source for the specified bus. this command specifies the source channel to use when the signal type is single ended. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:ETHERnet:SOUrce:DPLUs? query.
Using the .verify(value) method will send the BUS:B<x>:ETHERnet:SOUrce:DPLUs? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:ETHERnet:SOUrce:DPLUs value command.

SCPI Syntax

- BUS:B<x>:ETHERnet:SOUrce:DPLUs {S<x>_Ch<x>|CH<x>|MATH<x>|REF<x>}
- BUS:B<x>:ETHERnet:SOUrce:DPLUs?

Info

B<x> is the number of the bus.
S<x>_Ch<x> specifies the remote scope number and the analog channel as the source.
CH<x> specifies an analog channel as the source.
Math<x> specifies a math waveform as the source.
REF<x> specifies a reference waveform as the source.

BusBItemEthernetSourceDminus ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:ETHERnet:SOUrce:DMINus command.

Description

This command sets or queries the Ethernet D- source for the specified bus. this command specifies the source channel to use when the signal type is single ended. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:ETHERnet:SOUrce:DMINus? query.
Using the .verify(value) method will send the BUS:B<x>:ETHERnet:SOUrce:DMINus? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:ETHERnet:SOUrce:DMINus value command.

SCPI Syntax

- BUS:B<x>:ETHERnet:SOUrce:DMINus {S<x>_Ch<x>|CH<x>|MATH<x>|REF<x>}
- BUS:B<x>:ETHERnet:SOUrce:DMINus?

Info

B<x> is the number of the bus.
S<x>_Ch<x> specifies the remote scope number and the analog channel as the source.
CH<x> specifies an analog channel as the source.
Math<x> specifies a math waveform as the source.
REF<x> specifies a reference waveform as the source.

BusBItemEthernetSourceDplus ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:ETHERnet:SOUrce:DPLUs command.

Description

This command sets or queries the Ethernet D+ source for the specified bus. this command specifies the source channel to use when the signal type is single ended. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:ETHERnet:SOUrce:DPLUs? query.
Using the .verify(value) method will send the BUS:B<x>:ETHERnet:SOUrce:DPLUs? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:ETHERnet:SOUrce:DPLUs value command.

SCPI Syntax

- BUS:B<x>:ETHERnet:SOUrce:DPLUs {S<x>_Ch<x>|CH<x>|MATH<x>|REF<x>}
- BUS:B<x>:ETHERnet:SOUrce:DPLUs?

Info

B<x> is the number of the bus.
S<x>_Ch<x> specifies the remote scope number and the analog channel as the source.
CH<x> specifies an analog channel as the source.
Math<x> specifies a math waveform as the source.
REF<x> specifies a reference waveform as the source.

BusBItemEthernetThreshold ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:ETHERnet:THRESHold command.

Description

This command sets or queries the Ethernet DATA source High threshold for the specified bus. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:ETHERnet:THRESHold? query.
Using the .verify(value) method will send the BUS:B<x>:ETHERnet:THRESHold? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:ETHERnet:THRESHold value command.

SCPI Syntax

- BUS:B<x>:ETHERnet:THRESHold <NR3>
- BUS:B<x>:ETHERnet:THRESHold?

Info

B<x> is the number of the bus.
<NR3> is the Ethernet DATA source High threshold for the specified bus.

BusBItemEthernetType ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:ETHERnet:TYPe command.

Description

This command specifies the Ethernet standard speed. The bus number is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:ETHERnet:TYPe? query.
Using the .verify(value) method will send the BUS:B<x>:ETHERnet:TYPe? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:ETHERnet:TYPe value command.

SCPI Syntax

- BUS:B<x>:ETHERnet:TYPe {TENBASET|HUNDREDBASETX}
- BUS:B<x>:ETHERnet:TYPe?

Info

B<x> is the number of the bus.
TENBASET specifies the Ethernet speed as 10Base-T.
HUNDREDBASETX specifies the Ethernet speed as 100Base-T.

BusBItemEusb ¶

Bases: SCPICmdRead

The BUS:B<x>:EUSB command tree.

Usage

Using the .query() method will send the BUS:B<x>:EUSB? query.
Using the .verify(value) method will send the BUS:B<x>:EUSB? query and raise an AssertionError if the returned value does not match value.

Info

B<x> is the number of the bus.

Properties

.bitrate: The BUS:B<x>:EUSB:BITRate command.
.dataminus: The BUS:B<x>:EUSB:DATAMINUS command tree.
.dataminusthreshold: The BUS:B<x>:EUSB:DATAMINUSTHRESHold command.
.dataplus: The BUS:B<x>:EUSB:DATAPLUS command tree.
.dataplusthreshold: The BUS:B<x>:EUSB:DATAPLUSTHRESHold command.
.lowthreshold: The BUS:B<x>:EUSB:LOWTHRESHold command.
.operating: The BUS:B<x>:EUSB:OPERating command tree.
.signaltype: The BUS:B<x>:EUSB:SIGNALTYpe command.
.source: The BUS:B<x>:EUSB:SOUrce command tree.
.threshold: The BUS:B<x>:EUSB:THRESHold command.

bitrate `property` ¶

bitrate: BusBItemEusbBitrate

Return the BUS:B<x>:EUSB:BITRate command.

Description

This command sets or queries the eUSB data rate for the specified bus.

Usage

Using the .query() method will send the BUS:B<x>:EUSB:BITRate? query.
Using the .verify(value) method will send the BUS:B<x>:EUSB:BITRate? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:EUSB:BITRate value command.

SCPI Syntax

- BUS:B<x>:EUSB:BITRate {HIGH|FULL|LOW}
- BUS:B<x>:EUSB:BITRate?

Info

B<x> is the number of the bus.
HIGH sets the bit rate to Bit Rate to 480 Mbps.
FULL sets the bit rate to Bit Rate to 12 Mbps.
LOW sets the bit rate to Bit Rate to 1.5 Mbps.

dataminus `property` ¶

dataminus: BusBItemEusbDataminus

Return the BUS:B<x>:EUSB:DATAMINUS command tree.

Usage

Using the .query() method will send the BUS:B<x>:EUSB:DATAMINUS? query.
Using the .verify(value) method will send the BUS:B<x>:EUSB:DATAMINUS? query and raise an AssertionError if the returned value does not match value.

Info

B<x> is the number of the bus.

Sub-properties

.data: The BUS:B<x>:EUSB:DATAMINUS:DATA command tree.

dataminusthreshold `property` ¶

dataminusthreshold: BusBItemEusbDataminusthreshold

Return the BUS:B<x>:EUSB:DATAMINUSTHRESHold command.

Description

This command sets or queries the eUSB D- Input Source Data Threshold for Data line decode for specified bus.

Usage

Using the .query() method will send the BUS:B<x>:EUSB:DATAMINUSTHRESHold? query.
Using the .verify(value) method will send the BUS:B<x>:EUSB:DATAMINUSTHRESHold? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:EUSB:DATAMINUSTHRESHold value command.

SCPI Syntax

- BUS:B<x>:EUSB:DATAMINUSTHRESHold <NR3>
- BUS:B<x>:EUSB:DATAMINUSTHRESHold?

Info

B<x> is the number of the bus.
<NR3> is the eUSB DATA Minus source threshold. The argument range is -8 V to +8 V.

dataplus `property` ¶

dataplus: BusBItemEusbDataplus

Return the BUS:B<x>:EUSB:DATAPLUS command tree.

Usage

Using the .query() method will send the BUS:B<x>:EUSB:DATAPLUS? query.
Using the .verify(value) method will send the BUS:B<x>:EUSB:DATAPLUS? query and raise an AssertionError if the returned value does not match value.

Info

B<x> is the number of the bus.

Sub-properties

.data: The BUS:B<x>:EUSB:DATAPLUS:DATA command tree.

dataplusthreshold `property` ¶

dataplusthreshold: BusBItemEusbDataplusthreshold

Return the BUS:B<x>:EUSB:DATAPLUSTHRESHold command.

Description

This command sets or queries the eUSB DATA Plus source threshold for the specified bus.

Usage

Using the .query() method will send the BUS:B<x>:EUSB:DATAPLUSTHRESHold? query.
Using the .verify(value) method will send the BUS:B<x>:EUSB:DATAPLUSTHRESHold? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:EUSB:DATAPLUSTHRESHold value command.

SCPI Syntax

- BUS:B<x>:EUSB:DATAPLUSTHRESHold <NR3>
- BUS:B<x>:EUSB:DATAPLUSTHRESHold?

Info

B<x> is the number of the bus.
<NR3> is the eUSB DATA Plus source threshold. The argument range is -8 V to +8 V.

lowthreshold `property` ¶

lowthreshold: BusBItemEusbLowthreshold

Return the BUS:B<x>:EUSB:LOWTHRESHold command.

Description

This command sets or queries the eUSB source Low threshold for the specified bus when signal type is Differential.

Usage

Using the .query() method will send the BUS:B<x>:EUSB:LOWTHRESHold? query.
Using the .verify(value) method will send the BUS:B<x>:EUSB:LOWTHRESHold? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:EUSB:LOWTHRESHold value command.

SCPI Syntax

- BUS:B<x>:EUSB:LOWTHRESHold <NR3>
- BUS:B<x>:EUSB:LOWTHRESHold?

Info

B<x> is the number of the bus.
<NR3> is the eUSB Strobe threshold for the specified bus. The argument range is -8 V to +8 V.

operating `property` ¶

operating: BusBItemEusbOperating

Return the BUS:B<x>:EUSB:OPERating command tree.

Usage

Using the .query() method will send the BUS:B<x>:EUSB:OPERating? query.
Using the .verify(value) method will send the BUS:B<x>:EUSB:OPERating? query and raise an AssertionError if the returned value does not match value.

Info

B<x> is the number of the bus.

Sub-properties

.mode: The BUS:B<x>:EUSB:OPERating:MODe command.

signaltype `property` ¶

signaltype: BusBItemEusbSignaltype

Return the BUS:B<x>:EUSB:SIGNALTYpe command.

Description

This command sets or queries the eUSB signal type for the specified bus.

Usage

Using the .query() method will send the BUS:B<x>:EUSB:SIGNALTYpe? query.
Using the .verify(value) method will send the BUS:B<x>:EUSB:SIGNALTYpe? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:EUSB:SIGNALTYpe value command.

SCPI Syntax

- BUS:B<x>:EUSB:SIGNALTYpe {SINGLE|DIFF}
- BUS:B<x>:EUSB:SIGNALTYpe?

Info

B<x> is the number of the bus.

source `property` ¶

source: BusBItemEusbSource

Return the BUS:B<x>:EUSB:SOUrce command tree.

Usage

Using the .query() method will send the BUS:B<x>:EUSB:SOUrce? query.
Using the .verify(value) method will send the BUS:B<x>:EUSB:SOUrce? query and raise an AssertionError if the returned value does not match value.

Info

B<x> is the number of the bus.

Sub-properties

.diff: The BUS:B<x>:EUSB:SOUrce:DIFF command.
.dminus: The BUS:B<x>:EUSB:SOUrce:DMINus command.
.dplus: The BUS:B<x>:EUSB:SOUrce:DPLUs command.

threshold `property` ¶

threshold: BusBItemEusbThreshold

Return the BUS:B<x>:EUSB:THRESHold command.

Description

This command sets or queries the eUSB source High threshold for the specified bus when signal type is Diff.

Usage

Using the .query() method will send the BUS:B<x>:EUSB:THRESHold? query.
Using the .verify(value) method will send the BUS:B<x>:EUSB:THRESHold? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:EUSB:THRESHold value command.

SCPI Syntax

- BUS:B<x>:EUSB:THRESHold <NR3>
- BUS:B<x>:EUSB:THRESHold?

Info

B<x> is the number of the bus.
<NR3> is the eUSB Strobe threshold for the specified bus. The argument range is -8 V to +8 V.

BusBItemEusbBitrate ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:EUSB:BITRate command.

Description

This command sets or queries the eUSB data rate for the specified bus.

Usage

Using the .query() method will send the BUS:B<x>:EUSB:BITRate? query.
Using the .verify(value) method will send the BUS:B<x>:EUSB:BITRate? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:EUSB:BITRate value command.

SCPI Syntax

- BUS:B<x>:EUSB:BITRate {HIGH|FULL|LOW}
- BUS:B<x>:EUSB:BITRate?

Info

B<x> is the number of the bus.
HIGH sets the bit rate to Bit Rate to 480 Mbps.
FULL sets the bit rate to Bit Rate to 12 Mbps.
LOW sets the bit rate to Bit Rate to 1.5 Mbps.

BusBItemEusbDataminus ¶

Bases: SCPICmdRead

The BUS:B<x>:EUSB:DATAMINUS command tree.

Usage

Using the .query() method will send the BUS:B<x>:EUSB:DATAMINUS? query.
Using the .verify(value) method will send the BUS:B<x>:EUSB:DATAMINUS? query and raise an AssertionError if the returned value does not match value.

Info

B<x> is the number of the bus.

Properties

.data: The BUS:B<x>:EUSB:DATAMINUS:DATA command tree.

data `property` ¶

data: BusBItemEusbDataminusData

Return the BUS:B<x>:EUSB:DATAMINUS:DATA command tree.

Usage

Using the .query() method will send the BUS:B<x>:EUSB:DATAMINUS:DATA? query.
Using the .verify(value) method will send the BUS:B<x>:EUSB:DATAMINUS:DATA? query and raise an AssertionError if the returned value does not match value.

Info

B<x> is the number of the bus.

Sub-properties

.threshold: The BUS:B<x>:EUSB:DATAMINUS:DATA:THRESHold command.

BusBItemEusbDataminusData ¶

Bases: SCPICmdRead

The BUS:B<x>:EUSB:DATAMINUS:DATA command tree.

Usage

Using the .query() method will send the BUS:B<x>:EUSB:DATAMINUS:DATA? query.
Using the .verify(value) method will send the BUS:B<x>:EUSB:DATAMINUS:DATA? query and raise an AssertionError if the returned value does not match value.

Info

B<x> is the number of the bus.

Properties

.threshold: The BUS:B<x>:EUSB:DATAMINUS:DATA:THRESHold command.

threshold `property` ¶

threshold: BusBItemEusbDataminusDataThreshold

Return the BUS:B<x>:EUSB:DATAMINUS:DATA:THRESHold command.

Description

This command sets or queries the eUSB D- Input Source Data Threshold for Data line decode for specified bus.

Usage

Using the .query() method will send the BUS:B<x>:EUSB:DATAMINUS:DATA:THRESHold? query.
Using the .verify(value) method will send the BUS:B<x>:EUSB:DATAMINUS:DATA:THRESHold? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:EUSB:DATAMINUS:DATA:THRESHold value command.

SCPI Syntax

- BUS:B<x>:EUSB:DATAMINUS:DATA:THRESHold <NR3>
- BUS:B<x>:EUSB:DATAMINUS:DATA:THRESHold?

Info

B<x> is the number of the bus.
<NR3> is the EUSB Strobe threshold for the specified bus. The argument range is -8 V to +8 V.

BusBItemEusbDataminusDataThreshold ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:EUSB:DATAMINUS:DATA:THRESHold command.

Description

This command sets or queries the eUSB D- Input Source Data Threshold for Data line decode for specified bus.

Usage

Using the .query() method will send the BUS:B<x>:EUSB:DATAMINUS:DATA:THRESHold? query.
Using the .verify(value) method will send the BUS:B<x>:EUSB:DATAMINUS:DATA:THRESHold? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:EUSB:DATAMINUS:DATA:THRESHold value command.

SCPI Syntax

- BUS:B<x>:EUSB:DATAMINUS:DATA:THRESHold <NR3>
- BUS:B<x>:EUSB:DATAMINUS:DATA:THRESHold?

Info

B<x> is the number of the bus.
<NR3> is the EUSB Strobe threshold for the specified bus. The argument range is -8 V to +8 V.

BusBItemEusbDataminusthreshold ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:EUSB:DATAMINUSTHRESHold command.

Description

This command sets or queries the eUSB D- Input Source Data Threshold for Data line decode for specified bus.

Usage

Using the .query() method will send the BUS:B<x>:EUSB:DATAMINUSTHRESHold? query.
Using the .verify(value) method will send the BUS:B<x>:EUSB:DATAMINUSTHRESHold? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:EUSB:DATAMINUSTHRESHold value command.

SCPI Syntax

- BUS:B<x>:EUSB:DATAMINUSTHRESHold <NR3>
- BUS:B<x>:EUSB:DATAMINUSTHRESHold?

Info

B<x> is the number of the bus.
<NR3> is the eUSB DATA Minus source threshold. The argument range is -8 V to +8 V.

BusBItemEusbDataplus ¶

Bases: SCPICmdRead

The BUS:B<x>:EUSB:DATAPLUS command tree.

Usage

Using the .query() method will send the BUS:B<x>:EUSB:DATAPLUS? query.
Using the .verify(value) method will send the BUS:B<x>:EUSB:DATAPLUS? query and raise an AssertionError if the returned value does not match value.

Info

B<x> is the number of the bus.

Properties

.data: The BUS:B<x>:EUSB:DATAPLUS:DATA command tree.

data `property` ¶

data: BusBItemEusbDataplusData

Return the BUS:B<x>:EUSB:DATAPLUS:DATA command tree.

Usage

Using the .query() method will send the BUS:B<x>:EUSB:DATAPLUS:DATA? query.
Using the .verify(value) method will send the BUS:B<x>:EUSB:DATAPLUS:DATA? query and raise an AssertionError if the returned value does not match value.

Info

B<x> is the number of the bus.

Sub-properties

.threshold: The BUS:B<x>:EUSB:DATAPLUS:DATA:THRESHold command.

BusBItemEusbDataplusData ¶

Bases: SCPICmdRead

The BUS:B<x>:EUSB:DATAPLUS:DATA command tree.

Usage

Using the .query() method will send the BUS:B<x>:EUSB:DATAPLUS:DATA? query.
Using the .verify(value) method will send the BUS:B<x>:EUSB:DATAPLUS:DATA? query and raise an AssertionError if the returned value does not match value.

Info

B<x> is the number of the bus.

Properties

.threshold: The BUS:B<x>:EUSB:DATAPLUS:DATA:THRESHold command.

threshold `property` ¶

threshold: BusBItemEusbDataplusDataThreshold

Return the BUS:B<x>:EUSB:DATAPLUS:DATA:THRESHold command.

Description

This command sets or queries the eUSB D+ Input Source Data Threshold for Data line decode for specified bus.

Usage

Using the .query() method will send the BUS:B<x>:EUSB:DATAPLUS:DATA:THRESHold? query.
Using the .verify(value) method will send the BUS:B<x>:EUSB:DATAPLUS:DATA:THRESHold? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:EUSB:DATAPLUS:DATA:THRESHold value command.

SCPI Syntax

- BUS:B<x>:EUSB:DATAPLUS:DATA:THRESHold <NR3>
- BUS:B<x>:EUSB:DATAPLUS:DATA:THRESHold?

Info

B<x> is the number of the bus.
<NR3> is the eUSB Strobe threshold for the specified bus. The argument range is -8 V to +8 V.

BusBItemEusbDataplusDataThreshold ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:EUSB:DATAPLUS:DATA:THRESHold command.

Description

This command sets or queries the eUSB D+ Input Source Data Threshold for Data line decode for specified bus.

Usage

Using the .query() method will send the BUS:B<x>:EUSB:DATAPLUS:DATA:THRESHold? query.
Using the .verify(value) method will send the BUS:B<x>:EUSB:DATAPLUS:DATA:THRESHold? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:EUSB:DATAPLUS:DATA:THRESHold value command.

SCPI Syntax

- BUS:B<x>:EUSB:DATAPLUS:DATA:THRESHold <NR3>
- BUS:B<x>:EUSB:DATAPLUS:DATA:THRESHold?

Info

B<x> is the number of the bus.
<NR3> is the eUSB Strobe threshold for the specified bus. The argument range is -8 V to +8 V.

BusBItemEusbDataplusthreshold ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:EUSB:DATAPLUSTHRESHold command.

Description

This command sets or queries the eUSB DATA Plus source threshold for the specified bus.

Usage

Using the .query() method will send the BUS:B<x>:EUSB:DATAPLUSTHRESHold? query.
Using the .verify(value) method will send the BUS:B<x>:EUSB:DATAPLUSTHRESHold? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:EUSB:DATAPLUSTHRESHold value command.

SCPI Syntax

- BUS:B<x>:EUSB:DATAPLUSTHRESHold <NR3>
- BUS:B<x>:EUSB:DATAPLUSTHRESHold?

Info

B<x> is the number of the bus.
<NR3> is the eUSB DATA Plus source threshold. The argument range is -8 V to +8 V.

BusBItemEusbLowthreshold ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:EUSB:LOWTHRESHold command.

Description

This command sets or queries the eUSB source Low threshold for the specified bus when signal type is Differential.

Usage

Using the .query() method will send the BUS:B<x>:EUSB:LOWTHRESHold? query.
Using the .verify(value) method will send the BUS:B<x>:EUSB:LOWTHRESHold? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:EUSB:LOWTHRESHold value command.

SCPI Syntax

- BUS:B<x>:EUSB:LOWTHRESHold <NR3>
- BUS:B<x>:EUSB:LOWTHRESHold?

Info

B<x> is the number of the bus.
<NR3> is the eUSB Strobe threshold for the specified bus. The argument range is -8 V to +8 V.

BusBItemEusbOperating ¶

Bases: SCPICmdRead

The BUS:B<x>:EUSB:OPERating command tree.

Usage

Using the .query() method will send the BUS:B<x>:EUSB:OPERating? query.
Using the .verify(value) method will send the BUS:B<x>:EUSB:OPERating? query and raise an AssertionError if the returned value does not match value.

Info

B<x> is the number of the bus.

Properties

.mode: The BUS:B<x>:EUSB:OPERating:MODe command.

mode `property` ¶

mode: BusBItemEusbOperatingMode

Return the BUS:B<x>:EUSB:OPERating:MODe command.

Description

This command sets or queries the eUSB mode for the specified bus.

Usage

Using the .query() method will send the BUS:B<x>:EUSB:OPERating:MODe? query.
Using the .verify(value) method will send the BUS:B<x>:EUSB:OPERating:MODe? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:EUSB:OPERating:MODe value command.

SCPI Syntax

- BUS:B<x>:EUSB:OPERating:MODe {NATive|REPEATERHOSt|REPEATERPERIPHERAL}
- BUS:B<x>:EUSB:OPERating:MODe?

Info

B<x> is the number of the bus.
NATive sets the operating mode as native.
REPEATERHOSt sets the operating mode as repeater host.
REPEATERPERIPHERAL sets the operating mode as repeater peripheral.

BusBItemEusbOperatingMode ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:EUSB:OPERating:MODe command.

Description

This command sets or queries the eUSB mode for the specified bus.

Usage

Using the .query() method will send the BUS:B<x>:EUSB:OPERating:MODe? query.
Using the .verify(value) method will send the BUS:B<x>:EUSB:OPERating:MODe? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:EUSB:OPERating:MODe value command.

SCPI Syntax

- BUS:B<x>:EUSB:OPERating:MODe {NATive|REPEATERHOSt|REPEATERPERIPHERAL}
- BUS:B<x>:EUSB:OPERating:MODe?

Info

B<x> is the number of the bus.
NATive sets the operating mode as native.
REPEATERHOSt sets the operating mode as repeater host.
REPEATERPERIPHERAL sets the operating mode as repeater peripheral.

BusBItemEusbSignaltype ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:EUSB:SIGNALTYpe command.

Description

This command sets or queries the eUSB signal type for the specified bus.

Usage

Using the .query() method will send the BUS:B<x>:EUSB:SIGNALTYpe? query.
Using the .verify(value) method will send the BUS:B<x>:EUSB:SIGNALTYpe? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:EUSB:SIGNALTYpe value command.

SCPI Syntax

- BUS:B<x>:EUSB:SIGNALTYpe {SINGLE|DIFF}
- BUS:B<x>:EUSB:SIGNALTYpe?

Info

B<x> is the number of the bus.

BusBItemEusbSource ¶

Bases: SCPICmdRead

The BUS:B<x>:EUSB:SOUrce command tree.

Usage

Using the .query() method will send the BUS:B<x>:EUSB:SOUrce? query.
Using the .verify(value) method will send the BUS:B<x>:EUSB:SOUrce? query and raise an AssertionError if the returned value does not match value.

Info

B<x> is the number of the bus.

Properties

.diff: The BUS:B<x>:EUSB:SOUrce:DIFF command.
.dminus: The BUS:B<x>:EUSB:SOUrce:DMINus command.
.dplus: The BUS:B<x>:EUSB:SOUrce:DPLUs command.

diff `property` ¶

diff: BusBItemEusbSourceDiff

Return the BUS:B<x>:EUSB:SOUrce:DIFF command.

Description

This command sets or queries the eUSB Diff source for the specified bus when signal type is Diff.

Usage

Using the .query() method will send the BUS:B<x>:EUSB:SOUrce:DIFF? query.
Using the .verify(value) method will send the BUS:B<x>:EUSB:SOUrce:DIFF? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:EUSB:SOUrce:DIFF value command.

SCPI Syntax

- BUS:B<x>:EUSB:SOUrce:DIFF {S<x>_Ch<x>|CH<x>|MATH<x>|REF<x>}
- BUS:B<x>:EUSB:SOUrce:DIFF?

Info

B<x> is the number of the bus.
S<x>_Ch<x> specifies the remote scope number and the analog channel as the source.
CH<x> specifies an analog channel as the source.
Math<x> specifies a math waveform as the source.
REF<x> specifies a reference waveform as the source.

dminus `property` ¶

dminus: BusBItemEusbSourceDminus

Return the BUS:B<x>:EUSB:SOUrce:DMINus command.

Description

This command sets or queries the eUSB DataMinus (SDATAMINUS) source for the specified bus.

Usage

Using the .query() method will send the BUS:B<x>:EUSB:SOUrce:DMINus? query.
Using the .verify(value) method will send the BUS:B<x>:EUSB:SOUrce:DMINus? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:EUSB:SOUrce:DMINus value command.

SCPI Syntax

- BUS:B<x>:EUSB:SOUrce:DMINus {S<x>_Ch<x>|CH<x>|MATH<x>|REF<x>}
- BUS:B<x>:EUSB:SOUrce:DMINus?

Info

B<x> is the number of the bus.
S<x>_Ch<x> specifies the remote scope number and the analog channel as the source.
CH<x> specifies an analog channel as the source.
Math<x> specifies a math waveform as the source.
REF<x> specifies a reference waveform as the source.

dplus `property` ¶

dplus: BusBItemEusbSourceDplus

Return the BUS:B<x>:EUSB:SOUrce:DPLUs command.

Description

This command sets or queries the eUSB dataPlus (SDATAPLUS) source for the specified bus.

Usage

Using the .query() method will send the BUS:B<x>:EUSB:SOUrce:DPLUs? query.
Using the .verify(value) method will send the BUS:B<x>:EUSB:SOUrce:DPLUs? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:EUSB:SOUrce:DPLUs value command.

SCPI Syntax

- BUS:B<x>:EUSB:SOUrce:DPLUs {S<x>_Ch<x>|CH<x>|MATH<x>|REF<x>}
- BUS:B<x>:EUSB:SOUrce:DPLUs?

Info

B<x> is the number of the bus.
S<x>_Ch<x> specifies the remote scope number and the analog channel as the source.
CH<x> specifies an analog channel as the source.
Math<x> specifies a math waveform as the source.
REF<x> specifies a reference waveform as the source.

BusBItemEusbSourceDiff ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:EUSB:SOUrce:DIFF command.

Description

This command sets or queries the eUSB Diff source for the specified bus when signal type is Diff.

Usage

Using the .query() method will send the BUS:B<x>:EUSB:SOUrce:DIFF? query.
Using the .verify(value) method will send the BUS:B<x>:EUSB:SOUrce:DIFF? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:EUSB:SOUrce:DIFF value command.

SCPI Syntax

- BUS:B<x>:EUSB:SOUrce:DIFF {S<x>_Ch<x>|CH<x>|MATH<x>|REF<x>}
- BUS:B<x>:EUSB:SOUrce:DIFF?

Info

B<x> is the number of the bus.
S<x>_Ch<x> specifies the remote scope number and the analog channel as the source.
CH<x> specifies an analog channel as the source.
Math<x> specifies a math waveform as the source.
REF<x> specifies a reference waveform as the source.

BusBItemEusbSourceDminus ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:EUSB:SOUrce:DMINus command.

Description

This command sets or queries the eUSB DataMinus (SDATAMINUS) source for the specified bus.

Usage

Using the .query() method will send the BUS:B<x>:EUSB:SOUrce:DMINus? query.
Using the .verify(value) method will send the BUS:B<x>:EUSB:SOUrce:DMINus? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:EUSB:SOUrce:DMINus value command.

SCPI Syntax

- BUS:B<x>:EUSB:SOUrce:DMINus {S<x>_Ch<x>|CH<x>|MATH<x>|REF<x>}
- BUS:B<x>:EUSB:SOUrce:DMINus?

Info

B<x> is the number of the bus.
S<x>_Ch<x> specifies the remote scope number and the analog channel as the source.
CH<x> specifies an analog channel as the source.
Math<x> specifies a math waveform as the source.
REF<x> specifies a reference waveform as the source.

BusBItemEusbSourceDplus ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:EUSB:SOUrce:DPLUs command.

Description

This command sets or queries the eUSB dataPlus (SDATAPLUS) source for the specified bus.

Usage

Using the .query() method will send the BUS:B<x>:EUSB:SOUrce:DPLUs? query.
Using the .verify(value) method will send the BUS:B<x>:EUSB:SOUrce:DPLUs? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:EUSB:SOUrce:DPLUs value command.

SCPI Syntax

- BUS:B<x>:EUSB:SOUrce:DPLUs {S<x>_Ch<x>|CH<x>|MATH<x>|REF<x>}
- BUS:B<x>:EUSB:SOUrce:DPLUs?

Info

B<x> is the number of the bus.
S<x>_Ch<x> specifies the remote scope number and the analog channel as the source.
CH<x> specifies an analog channel as the source.
Math<x> specifies a math waveform as the source.
REF<x> specifies a reference waveform as the source.

BusBItemEusbThreshold ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:EUSB:THRESHold command.

Description

This command sets or queries the eUSB source High threshold for the specified bus when signal type is Diff.

Usage

Using the .query() method will send the BUS:B<x>:EUSB:THRESHold? query.
Using the .verify(value) method will send the BUS:B<x>:EUSB:THRESHold? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:EUSB:THRESHold value command.

SCPI Syntax

- BUS:B<x>:EUSB:THRESHold <NR3>
- BUS:B<x>:EUSB:THRESHold?

Info

B<x> is the number of the bus.
<NR3> is the eUSB Strobe threshold for the specified bus. The argument range is -8 V to +8 V.

BusBItemFlexray ¶

Bases: SCPICmdRead

The BUS:B<x>:FLEXray command tree.

Usage

Using the .query() method will send the BUS:B<x>:FLEXray? query.
Using the .verify(value) method will send the BUS:B<x>:FLEXray? query and raise an AssertionError if the returned value does not match value.

Info

B<x> is the number of the bus.

Properties

.bitrate: The BUS:B<x>:FLEXray:BITRate command.
.channel: The BUS:B<x>:FLEXray:CHannel command.
.lowthreshold: The BUS:B<x>:FLEXray:LOWTHRESHold command.
.signal: The BUS:B<x>:FLEXray:SIGnal command.
.source: The BUS:B<x>:FLEXray:SOUrce command.
.threshold: The BUS:B<x>:FLEXray:THRESHold command.
.txrxthreshold: The BUS:B<x>:FLEXray:TXRXTHRESHold command.

bitrate `property` ¶

bitrate: BusBItemFlexrayBitrate

Return the BUS:B<x>:FLEXray:BITRate command.

Description

This command sets or queries the FlexRay bus bit rate. The bus is specified by x. If you select Custom, use BUS:BX:FLEXRAY:BITRATE:CUSTOM to set the bit rate.

Usage

Using the .query() method will send the BUS:B<x>:FLEXray:BITRate? query.
Using the .verify(value) method will send the BUS:B<x>:FLEXray:BITRate? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:FLEXray:BITRate value command.

SCPI Syntax

- BUS:B<x>:FLEXray:BITRate {CUSTOM|RATE2M|RATE5M|RATE10M}
- BUS:B<x>:FLEXray:BITRate?

Info

B<x> is the number of the bus.

Sub-properties

.custom: The BUS:B<x>:FLEXray:BITRate:CUSTom command.

channel `property` ¶

channel: BusBItemFlexrayChannel

Return the BUS:B<x>:FLEXray:CHannel command.

Description

Specifies the FlexRay bus ID format.

Usage

Using the .query() method will send the BUS:B<x>:FLEXray:CHannel? query.
Using the .verify(value) method will send the BUS:B<x>:FLEXray:CHannel? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:FLEXray:CHannel value command.

SCPI Syntax

- BUS:B<x>:FLEXray:CHannel {A|B}
- BUS:B<x>:FLEXray:CHannel?

Info

B<x> is the number of the bus.
A sets the FlexRay ID format to channel A.
B sets the FlexRay ID format to channel B.

lowthreshold `property` ¶

lowthreshold: BusBItemFlexrayLowthreshold

Return the BUS:B<x>:FLEXray:LOWTHRESHold command.

Description

This command sets or queries the FlexRay data source low threshold for the specified bus. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:FLEXray:LOWTHRESHold? query.
Using the .verify(value) method will send the BUS:B<x>:FLEXray:LOWTHRESHold? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:FLEXray:LOWTHRESHold value command.

SCPI Syntax

- BUS:B<x>:FLEXray:LOWTHRESHold <NR3>
- BUS:B<x>:FLEXray:LOWTHRESHold?

Info

<NR3> is the FlexRay data source low threshold for the specified bus.
B<x> is the number of the bus.

signal `property` ¶

signal: BusBItemFlexraySignal

Return the BUS:B<x>:FLEXray:SIGnal command.

Description

Specifies the FlexRay bus standard.

Usage

Using the .query() method will send the BUS:B<x>:FLEXray:SIGnal? query.
Using the .verify(value) method will send the BUS:B<x>:FLEXray:SIGnal? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:FLEXray:SIGnal value command.

SCPI Syntax

- BUS:B<x>:FLEXray:SIGnal {BDIFFBP|BM|TXRX}
- BUS:B<x>:FLEXray:SIGnal?

Info

B<x> is the number of the bus.
BDIFFBP sets the FlexRay standard to BDIFFBP.
BM sets the FlexRay standard to BM.
TXRX sets the FlexRay standard to TXRX.

source `property` ¶

source: BusBItemFlexraySource

Return the BUS:B<x>:FLEXray:SOUrce command.

Description

This command sets or queries the Flexray bus data source for the specified bus when the signal type is BDIFFBP or BM. The bus number is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:FLEXray:SOUrce? query.
Using the .verify(value) method will send the BUS:B<x>:FLEXray:SOUrce? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:FLEXray:SOUrce value command.

SCPI Syntax

- BUS:B<x>:FLEXray:SOUrce {S<x>_Ch<x>|CH<x>|MATH<x>|REF<x>}
- BUS:B<x>:FLEXray:SOUrce?

Info

B<x> is the number of the bus.
S<x>_Ch<x> specifies the remote scope number and the analog channel as the source.
CH<x> specifies an analog channel as the source.
Math<x> specifies a math waveform as the source.
REF<x> specifies a reference waveform as the source.

Sub-properties

.txrx: The BUS:B<x>:FLEXray:SOUrce:TXRX command.

threshold `property` ¶

threshold: BusBItemFlexrayThreshold

Return the BUS:B<x>:FLEXray:THRESHold command.

Description

This command sets or queries the FlexRay data source high threshold for the specified bus. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:FLEXray:THRESHold? query.
Using the .verify(value) method will send the BUS:B<x>:FLEXray:THRESHold? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:FLEXray:THRESHold value command.

SCPI Syntax

- BUS:B<x>:FLEXray:THRESHold <NR3>
- BUS:B<x>:FLEXray:THRESHold?

Info

B<x> is the number of the bus.
<NR3> is the FlexRay data source high threshold for the specified bus.

txrxthreshold `property` ¶

txrxthreshold: BusBItemFlexrayTxrxthreshold

Return the BUS:B<x>:FLEXray:TXRXTHRESHold command.

Description

This command sets or queries the FlexRay data source TxRx threshold for the specified bus. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:FLEXray:TXRXTHRESHold? query.
Using the .verify(value) method will send the BUS:B<x>:FLEXray:TXRXTHRESHold? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:FLEXray:TXRXTHRESHold value command.

SCPI Syntax

- BUS:B<x>:FLEXray:TXRXTHRESHold <NR3>
- BUS:B<x>:FLEXray:TXRXTHRESHold?

Info

B<x> is the number of the bus.
<NR3> is the TxRx threshold.

BusBItemFlexrayBitrate ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:FLEXray:BITRate command.

Description

This command sets or queries the FlexRay bus bit rate. The bus is specified by x. If you select Custom, use BUS:BX:FLEXRAY:BITRATE:CUSTOM to set the bit rate.

Usage

Using the .query() method will send the BUS:B<x>:FLEXray:BITRate? query.
Using the .verify(value) method will send the BUS:B<x>:FLEXray:BITRate? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:FLEXray:BITRate value command.

SCPI Syntax

- BUS:B<x>:FLEXray:BITRate {CUSTOM|RATE2M|RATE5M|RATE10M}
- BUS:B<x>:FLEXray:BITRate?

Info

B<x> is the number of the bus.

Properties

.custom: The BUS:B<x>:FLEXray:BITRate:CUSTom command.

custom `property` ¶

custom: BusBItemFlexrayBitrateCustom

Return the BUS:B<x>:FLEXray:BITRate:CUSTom command.

Description

This command sets or queries the FlexRay custom bit rate for the specified bus. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:FLEXray:BITRate:CUSTom? query.
Using the .verify(value) method will send the BUS:B<x>:FLEXray:BITRate:CUSTom? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:FLEXray:BITRate:CUSTom value command.

SCPI Syntax

- BUS:B<x>:FLEXray:BITRate:CUSTom <NR1>
- BUS:B<x>:FLEXray:BITRate:CUSTom?

Info

B<x> is the number of the bus.
<NR1> is the FlexRay custom bit rate for the specified bus.

BusBItemFlexrayBitrateCustom ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:FLEXray:BITRate:CUSTom command.

Description

This command sets or queries the FlexRay custom bit rate for the specified bus. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:FLEXray:BITRate:CUSTom? query.
Using the .verify(value) method will send the BUS:B<x>:FLEXray:BITRate:CUSTom? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:FLEXray:BITRate:CUSTom value command.

SCPI Syntax

- BUS:B<x>:FLEXray:BITRate:CUSTom <NR1>
- BUS:B<x>:FLEXray:BITRate:CUSTom?

Info

B<x> is the number of the bus.
<NR1> is the FlexRay custom bit rate for the specified bus.

BusBItemFlexrayChannel ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:FLEXray:CHannel command.

Description

Specifies the FlexRay bus ID format.

Usage

Using the .query() method will send the BUS:B<x>:FLEXray:CHannel? query.
Using the .verify(value) method will send the BUS:B<x>:FLEXray:CHannel? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:FLEXray:CHannel value command.

SCPI Syntax

- BUS:B<x>:FLEXray:CHannel {A|B}
- BUS:B<x>:FLEXray:CHannel?

Info

B<x> is the number of the bus.
A sets the FlexRay ID format to channel A.
B sets the FlexRay ID format to channel B.

BusBItemFlexrayLowthreshold ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:FLEXray:LOWTHRESHold command.

Description

This command sets or queries the FlexRay data source low threshold for the specified bus. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:FLEXray:LOWTHRESHold? query.
Using the .verify(value) method will send the BUS:B<x>:FLEXray:LOWTHRESHold? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:FLEXray:LOWTHRESHold value command.

SCPI Syntax

- BUS:B<x>:FLEXray:LOWTHRESHold <NR3>
- BUS:B<x>:FLEXray:LOWTHRESHold?

Info

<NR3> is the FlexRay data source low threshold for the specified bus.
B<x> is the number of the bus.

BusBItemFlexraySignal ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:FLEXray:SIGnal command.

Description

Specifies the FlexRay bus standard.

Usage

Using the .query() method will send the BUS:B<x>:FLEXray:SIGnal? query.
Using the .verify(value) method will send the BUS:B<x>:FLEXray:SIGnal? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:FLEXray:SIGnal value command.

SCPI Syntax

- BUS:B<x>:FLEXray:SIGnal {BDIFFBP|BM|TXRX}
- BUS:B<x>:FLEXray:SIGnal?

Info

B<x> is the number of the bus.
BDIFFBP sets the FlexRay standard to BDIFFBP.
BM sets the FlexRay standard to BM.
TXRX sets the FlexRay standard to TXRX.

BusBItemFlexraySource ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:FLEXray:SOUrce command.

Description

This command sets or queries the Flexray bus data source for the specified bus when the signal type is BDIFFBP or BM. The bus number is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:FLEXray:SOUrce? query.
Using the .verify(value) method will send the BUS:B<x>:FLEXray:SOUrce? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:FLEXray:SOUrce value command.

SCPI Syntax

- BUS:B<x>:FLEXray:SOUrce {S<x>_Ch<x>|CH<x>|MATH<x>|REF<x>}
- BUS:B<x>:FLEXray:SOUrce?

Info

B<x> is the number of the bus.
S<x>_Ch<x> specifies the remote scope number and the analog channel as the source.
CH<x> specifies an analog channel as the source.
Math<x> specifies a math waveform as the source.
REF<x> specifies a reference waveform as the source.

Properties

.txrx: The BUS:B<x>:FLEXray:SOUrce:TXRX command.

txrx `property` ¶

txrx: BusBItemFlexraySourceTxrx

Return the BUS:B<x>:FLEXray:SOUrce:TXRX command.

Description

This command sets or queries the FlexRay TxRx data source for the specified bus when the signal type is TXRX. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:FLEXray:SOUrce:TXRX? query.
Using the .verify(value) method will send the BUS:B<x>:FLEXray:SOUrce:TXRX? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:FLEXray:SOUrce:TXRX value command.

SCPI Syntax

- BUS:B<x>:FLEXray:SOUrce:TXRX {S<x>_Ch<x>_D<x>|CH<x>|CH<x>_D<x>|MATH<x>|REF<x>|REF<x>_D<x>}
- BUS:B<x>:FLEXray:SOUrce:TXRX?

Info

B<x> is the number of the bus.
S<x>_Ch<x>_D<x> specifies the remote scope number, the analog channel and the digital channel as the source.
CH<x>_D<x> specifies an analog channel and the digital channel as the source.
REF<x>_D<x> specifies a reference waveform and the digital channel as the source.
CH<x> specifies an analog channel as the source.
Math<x> specifies a math waveform as the source.
REF<x> specifies a reference waveform as the source.

BusBItemFlexraySourceTxrx ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:FLEXray:SOUrce:TXRX command.

Description

This command sets or queries the FlexRay TxRx data source for the specified bus when the signal type is TXRX. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:FLEXray:SOUrce:TXRX? query.
Using the .verify(value) method will send the BUS:B<x>:FLEXray:SOUrce:TXRX? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:FLEXray:SOUrce:TXRX value command.

SCPI Syntax

- BUS:B<x>:FLEXray:SOUrce:TXRX {S<x>_Ch<x>_D<x>|CH<x>|CH<x>_D<x>|MATH<x>|REF<x>|REF<x>_D<x>}
- BUS:B<x>:FLEXray:SOUrce:TXRX?

Info

B<x> is the number of the bus.
S<x>_Ch<x>_D<x> specifies the remote scope number, the analog channel and the digital channel as the source.
CH<x>_D<x> specifies an analog channel and the digital channel as the source.
REF<x>_D<x> specifies a reference waveform and the digital channel as the source.
CH<x> specifies an analog channel as the source.
Math<x> specifies a math waveform as the source.
REF<x> specifies a reference waveform as the source.

BusBItemFlexrayThreshold ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:FLEXray:THRESHold command.

Description

This command sets or queries the FlexRay data source high threshold for the specified bus. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:FLEXray:THRESHold? query.
Using the .verify(value) method will send the BUS:B<x>:FLEXray:THRESHold? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:FLEXray:THRESHold value command.

SCPI Syntax

- BUS:B<x>:FLEXray:THRESHold <NR3>
- BUS:B<x>:FLEXray:THRESHold?

Info

B<x> is the number of the bus.
<NR3> is the FlexRay data source high threshold for the specified bus.

BusBItemFlexrayTxrxthreshold ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:FLEXray:TXRXTHRESHold command.

Description

This command sets or queries the FlexRay data source TxRx threshold for the specified bus. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:FLEXray:TXRXTHRESHold? query.
Using the .verify(value) method will send the BUS:B<x>:FLEXray:TXRXTHRESHold? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:FLEXray:TXRXTHRESHold value command.

SCPI Syntax

- BUS:B<x>:FLEXray:TXRXTHRESHold <NR3>
- BUS:B<x>:FLEXray:TXRXTHRESHold?

Info

B<x> is the number of the bus.
<NR3> is the TxRx threshold.

BusBItemI2c ¶

Bases: SCPICmdRead

The BUS:B<x>:I2C command tree.

Usage

Using the .query() method will send the BUS:B<x>:I2C? query.
Using the .verify(value) method will send the BUS:B<x>:I2C? query and raise an AssertionError if the returned value does not match value.

Info

B<x> is the number of the bus.

Properties

.clock: The BUS:B<x>:I2C:CLOCk command tree.
.data: The BUS:B<x>:I2C:DATa command tree.
.rwinaddr: The BUS:B<x>:I2C:RWINADDR command.

clock `property` ¶

clock: BusBItemI2cClock

Return the BUS:B<x>:I2C:CLOCk command tree.

Usage

Using the .query() method will send the BUS:B<x>:I2C:CLOCk? query.
Using the .verify(value) method will send the BUS:B<x>:I2C:CLOCk? query and raise an AssertionError if the returned value does not match value.

Info

B<x> is the number of the bus.

Sub-properties

.source: The BUS:B<x>:I2C:CLOCk:SOUrce command.
.threshold: The BUS:B<x>:I2C:CLOCk:THReshold command.

data `property` ¶

data: BusBItemI2cData

Return the BUS:B<x>:I2C:DATa command tree.

Usage

Using the .query() method will send the BUS:B<x>:I2C:DATa? query.
Using the .verify(value) method will send the BUS:B<x>:I2C:DATa? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.source: The BUS:B<x>:I2C:DATa:SOUrce command.
.threshold: The BUS:B<x>:I2C:DATa:THReshold command.

rwinaddr `property` ¶

rwinaddr: BusBItemI2cRwinaddr

Return the BUS:B<x>:I2C:RWINADDR command.

Description

This command sets or queries the manner in which seven-bit I2C addresses are represented in the busform display of the specified bus. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:I2C:RWINADDR? query.
Using the .verify(value) method will send the BUS:B<x>:I2C:RWINADDR? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:I2C:RWINADDR value command.

SCPI Syntax

- BUS:B<x>:I2C:RWINADDR {0|1}
- BUS:B<x>:I2C:RWINADDR?

Info

B<x> is the number of the bus.
0 displays seven-bit slave addresses as integers in the range of 0 to 127, with the state of the R/W* bit from the LSB of the slave address byte. For example, the slave address byte of 0b10100101 is displayed as the value 0x52 R.
1 displays the entire slave address byte as a number, with the R/W* signal as its LSB (bit 0) and the slave address in bits 7..1. For example, the slave address byte of 0b10100101 is displayed as the value 0xA5 R.

BusBItemI2cClock ¶

Bases: SCPICmdRead

The BUS:B<x>:I2C:CLOCk command tree.

Usage

Using the .query() method will send the BUS:B<x>:I2C:CLOCk? query.
Using the .verify(value) method will send the BUS:B<x>:I2C:CLOCk? query and raise an AssertionError if the returned value does not match value.

Info

B<x> is the number of the bus.

Properties

.source: The BUS:B<x>:I2C:CLOCk:SOUrce command.
.threshold: The BUS:B<x>:I2C:CLOCk:THReshold command.

source `property` ¶

source: BusBItemI2cClockSource

Return the BUS:B<x>:I2C:CLOCk:SOUrce command.

Description

This command sets or queries the I2C clock (SCLK) source for the specified bus. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:I2C:CLOCk:SOUrce? query.
Using the .verify(value) method will send the BUS:B<x>:I2C:CLOCk:SOUrce? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:I2C:CLOCk:SOUrce value command.

SCPI Syntax

- BUS:B<x>:I2C:CLOCk:SOUrce {S<x>_Ch<x>_D<x>|CH<x>|CH<x>_D<x>|MATH<x>|REF<x>|REF<x>_D<x>}
- BUS:B<x>:I2C:CLOCk:SOUrce?

Info

B<x> is the number of the bus.
S<x>_Ch<x>_D<x> specifies is the remote scope number, the analog channel and the digital channel.
CH<x> specifies an analog channel to use as the I2C SCLK source.
CH<x>_D<x> specifies a digital channel to use as the I2C SCLK source.
MATH<x> specifies a math waveform to use as the I2C SCLK source.
REF<x> specifies a reference waveform to use as the I2C SCLK source.
REF<x>_D<x> specifies a digital reference waveform as the clock source waveform for the specified I2C bus.

threshold `property` ¶

threshold: BusBItemI2cClockThreshold

Return the BUS:B<x>:I2C:CLOCk:THReshold command.

Description

This command sets or queries the I2C Clock (SCLK) source threshold for the specified bus. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:I2C:CLOCk:THReshold? query.
Using the .verify(value) method will send the BUS:B<x>:I2C:CLOCk:THReshold? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:I2C:CLOCk:THReshold value command.

SCPI Syntax

- BUS:B<x>:I2C:CLOCk:THReshold <NR3>
- BUS:B<x>:I2C:CLOCk:THReshold?

Info

B<x> is the number of the bus.
<NR3> is the I2C Clock (SCLK) source threshold for the specified bus.

BusBItemI2cClockSource ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:I2C:CLOCk:SOUrce command.

Description

This command sets or queries the I2C clock (SCLK) source for the specified bus. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:I2C:CLOCk:SOUrce? query.
Using the .verify(value) method will send the BUS:B<x>:I2C:CLOCk:SOUrce? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:I2C:CLOCk:SOUrce value command.

SCPI Syntax

- BUS:B<x>:I2C:CLOCk:SOUrce {S<x>_Ch<x>_D<x>|CH<x>|CH<x>_D<x>|MATH<x>|REF<x>|REF<x>_D<x>}
- BUS:B<x>:I2C:CLOCk:SOUrce?

Info

B<x> is the number of the bus.
S<x>_Ch<x>_D<x> specifies is the remote scope number, the analog channel and the digital channel.
CH<x> specifies an analog channel to use as the I2C SCLK source.
CH<x>_D<x> specifies a digital channel to use as the I2C SCLK source.
MATH<x> specifies a math waveform to use as the I2C SCLK source.
REF<x> specifies a reference waveform to use as the I2C SCLK source.
REF<x>_D<x> specifies a digital reference waveform as the clock source waveform for the specified I2C bus.

BusBItemI2cClockThreshold ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:I2C:CLOCk:THReshold command.

Description

This command sets or queries the I2C Clock (SCLK) source threshold for the specified bus. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:I2C:CLOCk:THReshold? query.
Using the .verify(value) method will send the BUS:B<x>:I2C:CLOCk:THReshold? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:I2C:CLOCk:THReshold value command.

SCPI Syntax

- BUS:B<x>:I2C:CLOCk:THReshold <NR3>
- BUS:B<x>:I2C:CLOCk:THReshold?

Info

B<x> is the number of the bus.
<NR3> is the I2C Clock (SCLK) source threshold for the specified bus.

BusBItemI2cData ¶

Bases: SCPICmdRead

The BUS:B<x>:I2C:DATa command tree.

Usage

Using the .query() method will send the BUS:B<x>:I2C:DATa? query.
Using the .verify(value) method will send the BUS:B<x>:I2C:DATa? query and raise an AssertionError if the returned value does not match value.

Properties

.source: The BUS:B<x>:I2C:DATa:SOUrce command.
.threshold: The BUS:B<x>:I2C:DATa:THReshold command.

source `property` ¶

source: BusBItemI2cDataSource

Return the BUS:B<x>:I2C:DATa:SOUrce command.

Description

This command sets or queries the I2C data (SDA) source for the specified I2C bus. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:I2C:DATa:SOUrce? query.
Using the .verify(value) method will send the BUS:B<x>:I2C:DATa:SOUrce? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:I2C:DATa:SOUrce value command.

SCPI Syntax

- BUS:B<x>:I2C:DATa:SOUrce {S<x>_Ch<x>_D<x>|CH<x>|CH<x>_D<x>|MATH<x>|REF<x>|REF<x>_D<x>}
- BUS:B<x>:I2C:DATa:SOUrce?

Info

S<x>_Ch<x>_D<x> specifies is the remote scope number, the analog channel and the digital channel.
CH<x> specifies an analog channel to use as the I2C SDA source.
CH<x>_D<x> specifies a digital channel to use as the I2C SDA source.
MATH<x> specifies a math waveform to use as the I2C SDA source.
REF<x> specifies a reference waveform to use as the I2C SDA source.
REF<x>_D<x> specifies a digital reference waveform as the data source waveform for the specified I2C bus.

threshold `property` ¶

threshold: BusBItemI2cDataThreshold

Return the BUS:B<x>:I2C:DATa:THReshold command.

Description

This command sets or queries the I2C Data (SDA) source threshold for the specified bus. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:I2C:DATa:THReshold? query.
Using the .verify(value) method will send the BUS:B<x>:I2C:DATa:THReshold? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:I2C:DATa:THReshold value command.

SCPI Syntax

- BUS:B<x>:I2C:DATa:THReshold <NR3>
- BUS:B<x>:I2C:DATa:THReshold?

Info

B<x> is the number of the bus.
<NR3> is the I2C Data (SDA) source threshold for the specified bus.

BusBItemI2cDataSource ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:I2C:DATa:SOUrce command.

Description

This command sets or queries the I2C data (SDA) source for the specified I2C bus. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:I2C:DATa:SOUrce? query.
Using the .verify(value) method will send the BUS:B<x>:I2C:DATa:SOUrce? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:I2C:DATa:SOUrce value command.

SCPI Syntax

- BUS:B<x>:I2C:DATa:SOUrce {S<x>_Ch<x>_D<x>|CH<x>|CH<x>_D<x>|MATH<x>|REF<x>|REF<x>_D<x>}
- BUS:B<x>:I2C:DATa:SOUrce?

Info

S<x>_Ch<x>_D<x> specifies is the remote scope number, the analog channel and the digital channel.
CH<x> specifies an analog channel to use as the I2C SDA source.
CH<x>_D<x> specifies a digital channel to use as the I2C SDA source.
MATH<x> specifies a math waveform to use as the I2C SDA source.
REF<x> specifies a reference waveform to use as the I2C SDA source.
REF<x>_D<x> specifies a digital reference waveform as the data source waveform for the specified I2C bus.

BusBItemI2cDataThreshold ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:I2C:DATa:THReshold command.

Description

This command sets or queries the I2C Data (SDA) source threshold for the specified bus. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:I2C:DATa:THReshold? query.
Using the .verify(value) method will send the BUS:B<x>:I2C:DATa:THReshold? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:I2C:DATa:THReshold value command.

SCPI Syntax

- BUS:B<x>:I2C:DATa:THReshold <NR3>
- BUS:B<x>:I2C:DATa:THReshold?

Info

B<x> is the number of the bus.
<NR3> is the I2C Data (SDA) source threshold for the specified bus.

BusBItemI2cRwinaddr ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:I2C:RWINADDR command.

Description

This command sets or queries the manner in which seven-bit I2C addresses are represented in the busform display of the specified bus. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:I2C:RWINADDR? query.
Using the .verify(value) method will send the BUS:B<x>:I2C:RWINADDR? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:I2C:RWINADDR value command.

SCPI Syntax

- BUS:B<x>:I2C:RWINADDR {0|1}
- BUS:B<x>:I2C:RWINADDR?

Info

B<x> is the number of the bus.
0 displays seven-bit slave addresses as integers in the range of 0 to 127, with the state of the R/W* bit from the LSB of the slave address byte. For example, the slave address byte of 0b10100101 is displayed as the value 0x52 R.
1 displays the entire slave address byte as a number, with the R/W* signal as its LSB (bit 0) and the slave address in bits 7..1. For example, the slave address byte of 0b10100101 is displayed as the value 0xA5 R.

BusBItemI3c ¶

Bases: SCPICmdRead

The BUS:B<x>:I3C command tree.

Usage

Using the .query() method will send the BUS:B<x>:I3C? query.
Using the .verify(value) method will send the BUS:B<x>:I3C? query and raise an AssertionError if the returned value does not match value.

Info

B<x> specifies the bus number.

Properties

.clock: The BUS:B<x>:I3C:CLOCk command tree.
.data: The BUS:B<x>:I3C:DATa command tree.

clock `property` ¶

clock: BusBItemI3cClock

Return the BUS:B<x>:I3C:CLOCk command tree.

Usage

Using the .query() method will send the BUS:B<x>:I3C:CLOCk? query.
Using the .verify(value) method will send the BUS:B<x>:I3C:CLOCk? query and raise an AssertionError if the returned value does not match value.

Info

B<x> specifies the bus number.

Sub-properties

.source: The BUS:B<x>:I3C:CLOCk:SOUrce command.
.threshold: The BUS:B<x>:I3C:CLOCk:THReshold command.

data `property` ¶

data: BusBItemI3cData

Return the BUS:B<x>:I3C:DATa command tree.

Usage

Using the .query() method will send the BUS:B<x>:I3C:DATa? query.
Using the .verify(value) method will send the BUS:B<x>:I3C:DATa? query and raise an AssertionError if the returned value does not match value.

Info

B<x> specifies the bus number.

Sub-properties

.source: The BUS:B<x>:I3C:DATa:SOUrce command.
.threshold: The BUS:B<x>:I3C:DATa:THReshold command.

BusBItemI3cClock ¶

Bases: SCPICmdRead

The BUS:B<x>:I3C:CLOCk command tree.

Usage

Using the .query() method will send the BUS:B<x>:I3C:CLOCk? query.
Using the .verify(value) method will send the BUS:B<x>:I3C:CLOCk? query and raise an AssertionError if the returned value does not match value.

Info

B<x> specifies the bus number.

Properties

.source: The BUS:B<x>:I3C:CLOCk:SOUrce command.
.threshold: The BUS:B<x>:I3C:CLOCk:THReshold command.

source `property` ¶

source: BusBItemI3cClockSource

Return the BUS:B<x>:I3C:CLOCk:SOUrce command.

Description

This command sets or queries the I3C clock (SCLK) source for the specified bus. Requires purchase and installation of option SRI3C.

Usage

Using the .query() method will send the BUS:B<x>:I3C:CLOCk:SOUrce? query.
Using the .verify(value) method will send the BUS:B<x>:I3C:CLOCk:SOUrce? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:I3C:CLOCk:SOUrce value command.

SCPI Syntax

- BUS:B<x>:I3C:CLOCk:SOUrce {S<x>_Ch<x>_D<x>|CH<x>|CH<x>_D<x>|MATH<x>|REF<x>|REF<x>_D<x>}
- BUS:B<x>:I3C:CLOCk:SOUrce?

Info

B<x> specifies the bus number.
S<x>_Ch<x>_D<x> specifies is the remote scope number, the analog channel and the digital channel.
CH<x> specifies the analog channel to use as the I3C SCLK source.
CH<x>_D<x> specifies the digital channel to use as the I3C SCLK source.
Math<x> specifies the math waveform to use as the I3C SCLK source.
REF<x> specifies the reference waveform to use as the I3C SCLK source.
REF<x>_D<x> specifies the digital reference waveform to use as the I3C SCLK source.

threshold `property` ¶

threshold: BusBItemI3cClockThreshold

Return the BUS:B<x>:I3C:CLOCk:THReshold command.

Description

This command sets or queries the I3C clock (SCLK) source threshold level for the specified bus. Requires purchase and installation of option SRI3C.

Usage

Using the .query() method will send the BUS:B<x>:I3C:CLOCk:THReshold? query.
Using the .verify(value) method will send the BUS:B<x>:I3C:CLOCk:THReshold? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:I3C:CLOCk:THReshold value command.

SCPI Syntax

- BUS:B<x>:I3C:CLOCk:THReshold <NR3>
- BUS:B<x>:I3C:CLOCk:THReshold?

Info

B<x> specifies the bus number.
<NR3> is the threshold value for I3C Clock (SCLK) source of the specified bus.

BusBItemI3cClockSource ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:I3C:CLOCk:SOUrce command.

Description

This command sets or queries the I3C clock (SCLK) source for the specified bus. Requires purchase and installation of option SRI3C.

Usage

Using the .query() method will send the BUS:B<x>:I3C:CLOCk:SOUrce? query.
Using the .verify(value) method will send the BUS:B<x>:I3C:CLOCk:SOUrce? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:I3C:CLOCk:SOUrce value command.

SCPI Syntax

- BUS:B<x>:I3C:CLOCk:SOUrce {S<x>_Ch<x>_D<x>|CH<x>|CH<x>_D<x>|MATH<x>|REF<x>|REF<x>_D<x>}
- BUS:B<x>:I3C:CLOCk:SOUrce?

Info

B<x> specifies the bus number.
S<x>_Ch<x>_D<x> specifies is the remote scope number, the analog channel and the digital channel.
CH<x> specifies the analog channel to use as the I3C SCLK source.
CH<x>_D<x> specifies the digital channel to use as the I3C SCLK source.
Math<x> specifies the math waveform to use as the I3C SCLK source.
REF<x> specifies the reference waveform to use as the I3C SCLK source.
REF<x>_D<x> specifies the digital reference waveform to use as the I3C SCLK source.

BusBItemI3cClockThreshold ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:I3C:CLOCk:THReshold command.

Description

This command sets or queries the I3C clock (SCLK) source threshold level for the specified bus. Requires purchase and installation of option SRI3C.

Usage

Using the .query() method will send the BUS:B<x>:I3C:CLOCk:THReshold? query.
Using the .verify(value) method will send the BUS:B<x>:I3C:CLOCk:THReshold? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:I3C:CLOCk:THReshold value command.

SCPI Syntax

- BUS:B<x>:I3C:CLOCk:THReshold <NR3>
- BUS:B<x>:I3C:CLOCk:THReshold?

Info

B<x> specifies the bus number.
<NR3> is the threshold value for I3C Clock (SCLK) source of the specified bus.

BusBItemI3cData ¶

Bases: SCPICmdRead

The BUS:B<x>:I3C:DATa command tree.

Usage

Using the .query() method will send the BUS:B<x>:I3C:DATa? query.
Using the .verify(value) method will send the BUS:B<x>:I3C:DATa? query and raise an AssertionError if the returned value does not match value.

Info

B<x> specifies the bus number.

Properties

.source: The BUS:B<x>:I3C:DATa:SOUrce command.
.threshold: The BUS:B<x>:I3C:DATa:THReshold command.

source `property` ¶

source: BusBItemI3cDataSource

Return the BUS:B<x>:I3C:DATa:SOUrce command.

Description

This command sets or queries the I3C data clock (SDA) source for the specified bus. Requires purchase and installation of option SRI3C.

Usage

Using the .query() method will send the BUS:B<x>:I3C:DATa:SOUrce? query.
Using the .verify(value) method will send the BUS:B<x>:I3C:DATa:SOUrce? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:I3C:DATa:SOUrce value command.

SCPI Syntax

- BUS:B<x>:I3C:DATa:SOUrce {S<x>_Ch<x>_D<x>|CH<x>|CH<x>_D<x>|MATH<x>|REF<x>|REF<x>_D<x>}
- BUS:B<x>:I3C:DATa:SOUrce?

Info

B<x> specifies the bus number.
S<x>_Ch<x>_D<x> specifies is the remote scope number, the analog channel and the digital channel.
CH<x> specifies the analog channel to use as the I3C SDA source.
CH<x>_D<x> specifies the digital channel to use as the I3C SDA source.
Math<x> specifies the math waveform to use as the I3C SDA source.
REF<x> specifies the reference waveform to use as the I3C SDA source.
REF<x>_D<x> specifies the digital reference waveform to use as the I3C SDA source.

threshold `property` ¶

threshold: BusBItemI3cDataThreshold

Return the BUS:B<x>:I3C:DATa:THReshold command.

Description

This command sets or queries the I3C clock (SDA) data threshold level for the specified bus. Requires purchase and installation of option SRI3C.

Usage

Using the .query() method will send the BUS:B<x>:I3C:DATa:THReshold? query.
Using the .verify(value) method will send the BUS:B<x>:I3C:DATa:THReshold? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:I3C:DATa:THReshold value command.

SCPI Syntax

- BUS:B<x>:I3C:DATa:THReshold {S<x>_Ch<x>_D<x>|CH<x>|CH<x>_D<x>|MATH<x>|REF<x>|REF<x>_D<x>}
- BUS:B<x>:I3C:DATa:THReshold?

Info

B<x> specifies the bus number.
<NR3> is the threshold value for I3C Data Clock (SDA) source of the specified bus.

BusBItemI3cDataSource ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:I3C:DATa:SOUrce command.

Description

This command sets or queries the I3C data clock (SDA) source for the specified bus. Requires purchase and installation of option SRI3C.

Usage

Using the .query() method will send the BUS:B<x>:I3C:DATa:SOUrce? query.
Using the .verify(value) method will send the BUS:B<x>:I3C:DATa:SOUrce? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:I3C:DATa:SOUrce value command.

SCPI Syntax

- BUS:B<x>:I3C:DATa:SOUrce {S<x>_Ch<x>_D<x>|CH<x>|CH<x>_D<x>|MATH<x>|REF<x>|REF<x>_D<x>}
- BUS:B<x>:I3C:DATa:SOUrce?

Info

B<x> specifies the bus number.
S<x>_Ch<x>_D<x> specifies is the remote scope number, the analog channel and the digital channel.
CH<x> specifies the analog channel to use as the I3C SDA source.
CH<x>_D<x> specifies the digital channel to use as the I3C SDA source.
Math<x> specifies the math waveform to use as the I3C SDA source.
REF<x> specifies the reference waveform to use as the I3C SDA source.
REF<x>_D<x> specifies the digital reference waveform to use as the I3C SDA source.

BusBItemI3cDataThreshold ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:I3C:DATa:THReshold command.

Description

This command sets or queries the I3C clock (SDA) data threshold level for the specified bus. Requires purchase and installation of option SRI3C.

Usage

Using the .query() method will send the BUS:B<x>:I3C:DATa:THReshold? query.
Using the .verify(value) method will send the BUS:B<x>:I3C:DATa:THReshold? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:I3C:DATa:THReshold value command.

SCPI Syntax

- BUS:B<x>:I3C:DATa:THReshold {S<x>_Ch<x>_D<x>|CH<x>|CH<x>_D<x>|MATH<x>|REF<x>|REF<x>_D<x>}
- BUS:B<x>:I3C:DATa:THReshold?

Info

B<x> specifies the bus number.
<NR3> is the threshold value for I3C Data Clock (SDA) source of the specified bus.

BusBItemLabel ¶

Bases: SCPICmdRead

The BUS:B<x>:LABel command tree.

Usage

Using the .query() method will send the BUS:B<x>:LABel? query.
Using the .verify(value) method will send the BUS:B<x>:LABel? query and raise an AssertionError if the returned value does not match value.

Info

B<x> is the number of the bus.

Properties

.color: The BUS:B<x>:LABel:COLor command.
.font: The BUS:B<x>:LABel:FONT command tree.
.xpos: The BUS:B<x>:LABel:XPOS command.
.ypos: The BUS:B<x>:LABel:YPOS command.
.name: The BUS:B<x>:LABel:name command.

color `property` ¶

color: BusBItemLabelColor

Return the BUS:B<x>:LABel:COLor command.

Description

This command sets or queries the color of the specified bus label. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:LABel:COLor? query.
Using the .verify(value) method will send the BUS:B<x>:LABel:COLor? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:LABel:COLor value command.

SCPI Syntax

- BUS:B<x>:LABel:COLor <QString>
- BUS:B<x>:LABel:COLor?

Info

B<x> is the number of the bus.
<QString> is the bus label color. To return the color to the default color, send an empty string as in this example: :BUS:B1:LABEL:COLOR ‘’.

font `property` ¶

font: BusBItemLabelFont

Return the BUS:B<x>:LABel:FONT command tree.

Usage

Using the .query() method will send the BUS:B<x>:LABel:FONT? query.
Using the .verify(value) method will send the BUS:B<x>:LABel:FONT? query and raise an AssertionError if the returned value does not match value.

Info

B<x> is the number of the bus.

Sub-properties

.bold: The BUS:B<x>:LABel:FONT:BOLD command.
.italic: The BUS:B<x>:LABel:FONT:ITALic command.
.size: The BUS:B<x>:LABel:FONT:SIZE command.
.type: The BUS:B<x>:LABel:FONT:TYPE command.
.underline: The BUS:B<x>:LABel:FONT:UNDERline command.

name `property` ¶

name: BusBItemLabelName

Return the BUS:B<x>:LABel:name command.

Description

This command sets or queries the label for the specified bus. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:LABel:name? query.
Using the .verify(value) method will send the BUS:B<x>:LABel:name? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:LABel:name value command.

SCPI Syntax

- BUS:B<x>:LABel:name <QString>
- BUS:B<x>:LABel:name?

Info

B<x> is the number of the bus.
<QString> is an alphanumeric string of text enclosed in quotes. The text string is limited to 30 characters. It contains the text label information for the bus.

xpos `property` ¶

xpos: BusBItemLabelXpos

Return the BUS:B<x>:LABel:XPOS command.

Description

This command sets or queries the x-position of the specified bus label. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:LABel:XPOS? query.
Using the .verify(value) method will send the BUS:B<x>:LABel:XPOS? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:LABel:XPOS value command.

SCPI Syntax

- BUS:B<x>:LABel:XPOS <NR3>
- BUS:B<x>:LABel:XPOS?

Info

B<x> is the number of the bus.
<NR3> is the x-position, in pixels relative to the left edge of the screen of the specified bus label.

ypos `property` ¶

ypos: BusBItemLabelYpos

Return the BUS:B<x>:LABel:YPOS command.

Description

This command sets or queries the y-position of the specified bus label. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:LABel:YPOS? query.
Using the .verify(value) method will send the BUS:B<x>:LABel:YPOS? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:LABel:YPOS value command.

SCPI Syntax

- BUS:B<x>:LABel:YPOS <NR3>
- BUS:B<x>:LABel:YPOS?

Info

B<x> is the number of the bus.
<NR3> is the y-position, in pixels relative to the baseline of the waveform, of the specified bus label.

BusBItemLabelColor ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:LABel:COLor command.

Description

This command sets or queries the color of the specified bus label. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:LABel:COLor? query.
Using the .verify(value) method will send the BUS:B<x>:LABel:COLor? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:LABel:COLor value command.

SCPI Syntax

- BUS:B<x>:LABel:COLor <QString>
- BUS:B<x>:LABel:COLor?

Info

B<x> is the number of the bus.
<QString> is the bus label color. To return the color to the default color, send an empty string as in this example: :BUS:B1:LABEL:COLOR ‘’.

BusBItemLabelFont ¶

Bases: SCPICmdRead

The BUS:B<x>:LABel:FONT command tree.

Usage

Using the .query() method will send the BUS:B<x>:LABel:FONT? query.
Using the .verify(value) method will send the BUS:B<x>:LABel:FONT? query and raise an AssertionError if the returned value does not match value.

Info

B<x> is the number of the bus.

Properties

.bold: The BUS:B<x>:LABel:FONT:BOLD command.
.italic: The BUS:B<x>:LABel:FONT:ITALic command.
.size: The BUS:B<x>:LABel:FONT:SIZE command.
.type: The BUS:B<x>:LABel:FONT:TYPE command.
.underline: The BUS:B<x>:LABel:FONT:UNDERline command.

bold `property` ¶

bold: BusBItemLabelFontBold

Return the BUS:B<x>:LABel:FONT:BOLD command.

Description

This command sets or queries the bold state of the specified bus label. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:LABel:FONT:BOLD? query.
Using the .verify(value) method will send the BUS:B<x>:LABel:FONT:BOLD? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:LABel:FONT:BOLD value command.

SCPI Syntax

- BUS:B<x>:LABel:FONT:BOLD {ON|OFF|1|0}
- BUS:B<x>:LABel:FONT:BOLD?

Info

B<x> is the number of the bus.
ON displays the label in bold font.
OFF does not display the label in bold font.
1 displays the label in bold font.
0 does not display the label in bold font.

italic `property` ¶

italic: BusBItemLabelFontItalic

Return the BUS:B<x>:LABel:FONT:ITALic command.

Description

This command sets or queries the italic state of the specified bus label. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:LABel:FONT:ITALic? query.
Using the .verify(value) method will send the BUS:B<x>:LABel:FONT:ITALic? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:LABel:FONT:ITALic value command.

SCPI Syntax

- BUS:B<x>:LABel:FONT:ITALic {ON|OFF|1|0}
- BUS:B<x>:LABel:FONT:ITALic?

Info

B<x> is the number of the bus.
ON displays the label in italic font.
OFF does not display the label in italic font.
1 displays the label in italic font.
0 does not display the label in italic font.

size `property` ¶

size: BusBItemLabelFontSize

Return the BUS:B<x>:LABel:FONT:SIZE command.

Description

This command sets or queries the font size of the specified bus label. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:LABel:FONT:SIZE? query.
Using the .verify(value) method will send the BUS:B<x>:LABel:FONT:SIZE? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:LABel:FONT:SIZE value command.

SCPI Syntax

- BUS:B<x>:LABel:FONT:SIZE <NR1>
- BUS:B<x>:LABel:FONT:SIZE?

Info

B<x> is the number of the bus.
<NR1> is the font size.

type `property` ¶

type: BusBItemLabelFontType

Return the BUS:B<x>:LABel:FONT:TYPE command.

Description

This command sets or queries the font type of the specified bus label, such as Arial or Times New Roman. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:LABel:FONT:TYPE? query.
Using the .verify(value) method will send the BUS:B<x>:LABel:FONT:TYPE? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:LABel:FONT:TYPE value command.

SCPI Syntax

- BUS:B<x>:LABel:FONT:TYPE <QString>
- BUS:B<x>:LABel:FONT:TYPE?

Info

B<x> is the number of the bus.
<QString> is the specified font type. Available fonts include: DejaVu Sans, DejaVu Sans Mono, DejaVu Serif, Frutiger LT Std, Monospace, Sans Serif, Serif, Ubuntu, Ubuntu Condensed, and Ubuntu Mono.

underline `property` ¶

underline: BusBItemLabelFontUnderline

Return the BUS:B<x>:LABel:FONT:UNDERline command.

Description

This command sets or queries the underline state of the specified bus label. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:LABel:FONT:UNDERline? query.
Using the .verify(value) method will send the BUS:B<x>:LABel:FONT:UNDERline? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:LABel:FONT:UNDERline value command.

SCPI Syntax

- BUS:B<x>:LABel:FONT:UNDERline {ON|OFF|1|0}
- BUS:B<x>:LABel:FONT:UNDERline?

Info

B<x> is the number of the bus.
ON displays the label in underlined font.
OFF does not display the label in underlined font.
1 displays the label in underlined font.
0 does not display the label in underlined font.

BusBItemLabelFontBold ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:LABel:FONT:BOLD command.

Description

This command sets or queries the bold state of the specified bus label. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:LABel:FONT:BOLD? query.
Using the .verify(value) method will send the BUS:B<x>:LABel:FONT:BOLD? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:LABel:FONT:BOLD value command.

SCPI Syntax

- BUS:B<x>:LABel:FONT:BOLD {ON|OFF|1|0}
- BUS:B<x>:LABel:FONT:BOLD?

Info

B<x> is the number of the bus.
ON displays the label in bold font.
OFF does not display the label in bold font.
1 displays the label in bold font.
0 does not display the label in bold font.

BusBItemLabelFontItalic ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:LABel:FONT:ITALic command.

Description

This command sets or queries the italic state of the specified bus label. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:LABel:FONT:ITALic? query.
Using the .verify(value) method will send the BUS:B<x>:LABel:FONT:ITALic? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:LABel:FONT:ITALic value command.

SCPI Syntax

- BUS:B<x>:LABel:FONT:ITALic {ON|OFF|1|0}
- BUS:B<x>:LABel:FONT:ITALic?

Info

B<x> is the number of the bus.
ON displays the label in italic font.
OFF does not display the label in italic font.
1 displays the label in italic font.
0 does not display the label in italic font.

BusBItemLabelFontSize ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:LABel:FONT:SIZE command.

Description

This command sets or queries the font size of the specified bus label. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:LABel:FONT:SIZE? query.
Using the .verify(value) method will send the BUS:B<x>:LABel:FONT:SIZE? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:LABel:FONT:SIZE value command.

SCPI Syntax

- BUS:B<x>:LABel:FONT:SIZE <NR1>
- BUS:B<x>:LABel:FONT:SIZE?

Info

B<x> is the number of the bus.
<NR1> is the font size.

BusBItemLabelFontType ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:LABel:FONT:TYPE command.

Description

This command sets or queries the font type of the specified bus label, such as Arial or Times New Roman. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:LABel:FONT:TYPE? query.
Using the .verify(value) method will send the BUS:B<x>:LABel:FONT:TYPE? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:LABel:FONT:TYPE value command.

SCPI Syntax

- BUS:B<x>:LABel:FONT:TYPE <QString>
- BUS:B<x>:LABel:FONT:TYPE?

Info

B<x> is the number of the bus.
<QString> is the specified font type. Available fonts include: DejaVu Sans, DejaVu Sans Mono, DejaVu Serif, Frutiger LT Std, Monospace, Sans Serif, Serif, Ubuntu, Ubuntu Condensed, and Ubuntu Mono.

BusBItemLabelFontUnderline ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:LABel:FONT:UNDERline command.

Description

This command sets or queries the underline state of the specified bus label. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:LABel:FONT:UNDERline? query.
Using the .verify(value) method will send the BUS:B<x>:LABel:FONT:UNDERline? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:LABel:FONT:UNDERline value command.

SCPI Syntax

- BUS:B<x>:LABel:FONT:UNDERline {ON|OFF|1|0}
- BUS:B<x>:LABel:FONT:UNDERline?

Info

B<x> is the number of the bus.
ON displays the label in underlined font.
OFF does not display the label in underlined font.
1 displays the label in underlined font.
0 does not display the label in underlined font.

BusBItemLabelName ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:LABel:name command.

Description

This command sets or queries the label for the specified bus. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:LABel:name? query.
Using the .verify(value) method will send the BUS:B<x>:LABel:name? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:LABel:name value command.

SCPI Syntax

- BUS:B<x>:LABel:name <QString>
- BUS:B<x>:LABel:name?

Info

B<x> is the number of the bus.
<QString> is an alphanumeric string of text enclosed in quotes. The text string is limited to 30 characters. It contains the text label information for the bus.

BusBItemLabelXpos ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:LABel:XPOS command.

Description

This command sets or queries the x-position of the specified bus label. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:LABel:XPOS? query.
Using the .verify(value) method will send the BUS:B<x>:LABel:XPOS? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:LABel:XPOS value command.

SCPI Syntax

- BUS:B<x>:LABel:XPOS <NR3>
- BUS:B<x>:LABel:XPOS?

Info

B<x> is the number of the bus.
<NR3> is the x-position, in pixels relative to the left edge of the screen of the specified bus label.

BusBItemLabelYpos ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:LABel:YPOS command.

Description

This command sets or queries the y-position of the specified bus label. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:LABel:YPOS? query.
Using the .verify(value) method will send the BUS:B<x>:LABel:YPOS? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:LABel:YPOS value command.

SCPI Syntax

- BUS:B<x>:LABel:YPOS <NR3>
- BUS:B<x>:LABel:YPOS?

Info

B<x> is the number of the bus.
<NR3> is the y-position, in pixels relative to the baseline of the waveform, of the specified bus label.

BusBItemLin ¶

Bases: SCPICmdRead

The BUS:B<x>:LIN command tree.

Usage

Using the .query() method will send the BUS:B<x>:LIN? query.
Using the .verify(value) method will send the BUS:B<x>:LIN? query and raise an AssertionError if the returned value does not match value.

Info

B<x> is the number of the bus.

Properties

.bitrate: The BUS:B<x>:LIN:BITRate command.
.idformat: The BUS:B<x>:LIN:IDFORmat command.
.polarity: The BUS:B<x>:LIN:POLarity command.
.samplepoint: The BUS:B<x>:LIN:SAMPLEpoint command.
.source: The BUS:B<x>:LIN:SOUrce command.
.standard: The BUS:B<x>:LIN:STANDard command.

bitrate `property` ¶

bitrate: BusBItemLinBitrate

Return the BUS:B<x>:LIN:BITRate command.

Description

This command sets or queries the LIN bus bit rate. The bus number is specified by x. If you select Custom, use BUS:BX:LIN:BITRATE:CUSTOM to set the bit rate.

Usage

Using the .query() method will send the BUS:B<x>:LIN:BITRate? query.
Using the .verify(value) method will send the BUS:B<x>:LIN:BITRate? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:LIN:BITRate value command.

SCPI Syntax

- BUS:B<x>:LIN:BITRate {RATE10K|RATE1K|RATE19K|RATE2K|RATE4K|RATE9K|CUSTom}
- BUS:B<x>:LIN:BITRate?

Info

B<x> is the number of the bus.

Sub-properties

.custom: The BUS:B<x>:LIN:BITRate:CUSTom command.

idformat `property` ¶

idformat: BusBItemLinIdformat

Return the BUS:B<x>:LIN:IDFORmat command.

Description

This command sets or queries LIN bus identifier format for the specified bus. The bus number is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:LIN:IDFORmat? query.
Using the .verify(value) method will send the BUS:B<x>:LIN:IDFORmat? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:LIN:IDFORmat value command.

SCPI Syntax

- BUS:B<x>:LIN:IDFORmat {NOPARity|PARity}
- BUS:B<x>:LIN:IDFORmat?

Info

B<x> is the number of the bus.
NOPARity specifies an id format that includes parity.
PARity specifies an id format that separates parity.

polarity `property` ¶

polarity: BusBItemLinPolarity

Return the BUS:B<x>:LIN:POLarity command.

Description

This command sets or queries the LIN source polarity for the specified bus. The bus number is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:LIN:POLarity? query.
Using the .verify(value) method will send the BUS:B<x>:LIN:POLarity? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:LIN:POLarity value command.

SCPI Syntax

- BUS:B<x>:LIN:POLarity {INVerted|NORmal}
- BUS:B<x>:LIN:POLarity?

Info

B<x> is the number of the bus.

samplepoint `property` ¶

samplepoint: BusBItemLinSamplepoint

Return the BUS:B<x>:LIN:SAMPLEpoint command.

Description

Specifies the LIN sample point, for the specified LIN bus. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:LIN:SAMPLEpoint? query.
Using the .verify(value) method will send the BUS:B<x>:LIN:SAMPLEpoint? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:LIN:SAMPLEpoint value command.

SCPI Syntax

- BUS:B<x>:LIN:SAMPLEpoint <NR1>
- BUS:B<x>:LIN:SAMPLEpoint?

Info

B<x> is the number of the bus.
<NR1> is a percentage that represents the point at which to sample during each bit period.

source `property` ¶

source: BusBItemLinSource

Return the BUS:B<x>:LIN:SOUrce command.

Description

This command sets or queries the LIN data source for the specified bus. The bus number is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:LIN:SOUrce? query.
Using the .verify(value) method will send the BUS:B<x>:LIN:SOUrce? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:LIN:SOUrce value command.

SCPI Syntax

- BUS:B<x>:LIN:SOUrce {S<x>_Ch<x>_D<x>|CH<x>|CH<x>_D<x>|MATH<x>|REF<x>|REF<x>_D<x>}
- BUS:B<x>:LIN:SOUrce?

Info

B<x> is the number of the bus.

Sub-properties

.threshold: The BUS:B<x>:LIN:SOUrce:THReshold command.

standard `property` ¶

standard: BusBItemLinStandard

Return the BUS:B<x>:LIN:STANDard command.

Description

This command sets or queries the LIN bus standard for the specified bus. The bus number is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:LIN:STANDard? query.
Using the .verify(value) method will send the BUS:B<x>:LIN:STANDard? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:LIN:STANDard value command.

SCPI Syntax

- BUS:B<x>:LIN:STANDard {MIXed|V1X|V2X}
- BUS:B<x>:LIN:STANDard?

Info

B<x> is the number of the bus.
MIXed specifies both versions 1.x and 2.x of the LIN standard.
V1X specifies version 1.x of the LIN standard.
V2X specifies version 2.x of the LIN standard.

BusBItemLinBitrate ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:LIN:BITRate command.

Description

This command sets or queries the LIN bus bit rate. The bus number is specified by x. If you select Custom, use BUS:BX:LIN:BITRATE:CUSTOM to set the bit rate.

Usage

Using the .query() method will send the BUS:B<x>:LIN:BITRate? query.
Using the .verify(value) method will send the BUS:B<x>:LIN:BITRate? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:LIN:BITRate value command.

SCPI Syntax

- BUS:B<x>:LIN:BITRate {RATE10K|RATE1K|RATE19K|RATE2K|RATE4K|RATE9K|CUSTom}
- BUS:B<x>:LIN:BITRate?

Info

B<x> is the number of the bus.

Properties

.custom: The BUS:B<x>:LIN:BITRate:CUSTom command.

custom `property` ¶

custom: BusBItemLinBitrateCustom

Return the BUS:B<x>:LIN:BITRate:CUSTom command.

Description

This command sets or queries LIN custom bit rate for the specified bus. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:LIN:BITRate:CUSTom? query.
Using the .verify(value) method will send the BUS:B<x>:LIN:BITRate:CUSTom? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:LIN:BITRate:CUSTom value command.

SCPI Syntax

- BUS:B<x>:LIN:BITRate:CUSTom <NR1>
- BUS:B<x>:LIN:BITRate:CUSTom?

Info

B<x> is the number of the bus.
<NR1> is the LIN custom bit rate for the specified bus.

BusBItemLinBitrateCustom ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:LIN:BITRate:CUSTom command.

Description

This command sets or queries LIN custom bit rate for the specified bus. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:LIN:BITRate:CUSTom? query.
Using the .verify(value) method will send the BUS:B<x>:LIN:BITRate:CUSTom? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:LIN:BITRate:CUSTom value command.

SCPI Syntax

- BUS:B<x>:LIN:BITRate:CUSTom <NR1>
- BUS:B<x>:LIN:BITRate:CUSTom?

Info

B<x> is the number of the bus.
<NR1> is the LIN custom bit rate for the specified bus.

BusBItemLinIdformat ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:LIN:IDFORmat command.

Description

This command sets or queries LIN bus identifier format for the specified bus. The bus number is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:LIN:IDFORmat? query.
Using the .verify(value) method will send the BUS:B<x>:LIN:IDFORmat? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:LIN:IDFORmat value command.

SCPI Syntax

- BUS:B<x>:LIN:IDFORmat {NOPARity|PARity}
- BUS:B<x>:LIN:IDFORmat?

Info

B<x> is the number of the bus.
NOPARity specifies an id format that includes parity.
PARity specifies an id format that separates parity.

BusBItemLinPolarity ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:LIN:POLarity command.

Description

This command sets or queries the LIN source polarity for the specified bus. The bus number is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:LIN:POLarity? query.
Using the .verify(value) method will send the BUS:B<x>:LIN:POLarity? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:LIN:POLarity value command.

SCPI Syntax

- BUS:B<x>:LIN:POLarity {INVerted|NORmal}
- BUS:B<x>:LIN:POLarity?

Info

B<x> is the number of the bus.

BusBItemLinSamplepoint ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:LIN:SAMPLEpoint command.

Description

Specifies the LIN sample point, for the specified LIN bus. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:LIN:SAMPLEpoint? query.
Using the .verify(value) method will send the BUS:B<x>:LIN:SAMPLEpoint? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:LIN:SAMPLEpoint value command.

SCPI Syntax

- BUS:B<x>:LIN:SAMPLEpoint <NR1>
- BUS:B<x>:LIN:SAMPLEpoint?

Info

B<x> is the number of the bus.
<NR1> is a percentage that represents the point at which to sample during each bit period.

BusBItemLinSource ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:LIN:SOUrce command.

Description

This command sets or queries the LIN data source for the specified bus. The bus number is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:LIN:SOUrce? query.
Using the .verify(value) method will send the BUS:B<x>:LIN:SOUrce? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:LIN:SOUrce value command.

SCPI Syntax

- BUS:B<x>:LIN:SOUrce {S<x>_Ch<x>_D<x>|CH<x>|CH<x>_D<x>|MATH<x>|REF<x>|REF<x>_D<x>}
- BUS:B<x>:LIN:SOUrce?

Info

B<x> is the number of the bus.

Properties

.threshold: The BUS:B<x>:LIN:SOUrce:THReshold command.

threshold `property` ¶

threshold: BusBItemLinSourceThreshold

Return the BUS:B<x>:LIN:SOUrce:THReshold command.

Description

This command sets or queries the LIN source threshold for the specified bus. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:LIN:SOUrce:THReshold? query.
Using the .verify(value) method will send the BUS:B<x>:LIN:SOUrce:THReshold? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:LIN:SOUrce:THReshold value command.

SCPI Syntax

- BUS:B<x>:LIN:SOUrce:THReshold <NR3>
- BUS:B<x>:LIN:SOUrce:THReshold?

Info

B<x> is the number of the bus.
<NR3> the LIN source threshold for the specified bus.

BusBItemLinSourceThreshold ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:LIN:SOUrce:THReshold command.

Description

This command sets or queries the LIN source threshold for the specified bus. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:LIN:SOUrce:THReshold? query.
Using the .verify(value) method will send the BUS:B<x>:LIN:SOUrce:THReshold? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:LIN:SOUrce:THReshold value command.

SCPI Syntax

- BUS:B<x>:LIN:SOUrce:THReshold <NR3>
- BUS:B<x>:LIN:SOUrce:THReshold?

Info

B<x> is the number of the bus.
<NR3> the LIN source threshold for the specified bus.

BusBItemLinStandard ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:LIN:STANDard command.

Description

This command sets or queries the LIN bus standard for the specified bus. The bus number is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:LIN:STANDard? query.
Using the .verify(value) method will send the BUS:B<x>:LIN:STANDard? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:LIN:STANDard value command.

SCPI Syntax

- BUS:B<x>:LIN:STANDard {MIXed|V1X|V2X}
- BUS:B<x>:LIN:STANDard?

Info

B<x> is the number of the bus.
MIXed specifies both versions 1.x and 2.x of the LIN standard.
V1X specifies version 1.x of the LIN standard.
V2X specifies version 2.x of the LIN standard.

BusBItemManchester ¶

Bases: SCPICmdRead

The BUS:B<x>:MANChester command tree.

Usage

Using the .query() method will send the BUS:B<x>:MANChester? query.
Using the .verify(value) method will send the BUS:B<x>:MANChester? query and raise an AssertionError if the returned value does not match value.

Info

B<x> is the number of the bus.

Properties

.bitorder: The BUS:B<x>:MANChester:BITORDer command.
.bitrate: The BUS:B<x>:MANChester:BITRate command.
.displaymode: The BUS:B<x>:MANChester:DISplaymode command.
.header: The BUS:B<x>:MANChester:HEADer command tree.
.idle: The BUS:B<x>:MANChester:IDLE command tree.
.source: The BUS:B<x>:MANChester:SOUrce command.
.start: The BUS:B<x>:MANChester:START command tree.
.sync: The BUS:B<x>:MANChester:SYNC command tree.
.threshold: The BUS:B<x>:MANChester:THReshold command.
.tolerance: The BUS:B<x>:MANChester:TOLerance command.
.transtion: The BUS:B<x>:MANChester:TRANstion command tree.
.trailer: The BUS:B<x>:MANChester:TRAiler command tree.
.word: The BUS:B<x>:MANChester:WORD command tree.
.wordsize: The BUS:B<x>:MANChester:WORDSIZe command.
.parity: The BUS:B<x>:MANChester:parity command.

bitorder `property` ¶

bitorder: BusBItemManchesterBitorder

Return the BUS:B<x>:MANChester:BITORDer command.

Description

This command sets or queries the Manchester bus Bit Order. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:MANChester:BITORDer? query.
Using the .verify(value) method will send the BUS:B<x>:MANChester:BITORDer? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:MANChester:BITORDer value command.

SCPI Syntax

- BUS:B<x>:MANChester:BITORDer {LSB|MSB}
- BUS:B<x>:MANChester:BITORDer?

Info

B<x> is the number of the bus.
LSB arranges the bits in LSB format, least significant bits first.
MSB arranges the bits in MSB format, most significant bits first.

bitrate `property` ¶

bitrate: BusBItemManchesterBitrate

Return the BUS:B<x>:MANChester:BITRate command.

Description

This command sets or queries the Manchester bus bit rate. The bus number is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:MANChester:BITRate? query.
Using the .verify(value) method will send the BUS:B<x>:MANChester:BITRate? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:MANChester:BITRate value command.

SCPI Syntax

- BUS:B<x>:MANChester:BITRate <NR1>
- BUS:B<x>:MANChester:BITRate?

Info

B<x> is the number of the bus.
<NR1> sets the bit rate up to 1 Gbps.

displaymode `property` ¶

displaymode: BusBItemManchesterDisplaymode

Return the BUS:B<x>:MANChester:DISplaymode command.

Description

This command sets or queries the Manchester bus Packet View. The bus number is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:MANChester:DISplaymode? query.
Using the .verify(value) method will send the BUS:B<x>:MANChester:DISplaymode? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:MANChester:DISplaymode value command.

SCPI Syntax

- BUS:B<x>:MANChester:DISplaymode {BITS|PACKET}
- BUS:B<x>:MANChester:DISplaymode?

Info

B<x> is the number of the bus.
BITS sets the PacketView to off and the data to be seen as single bits formats.
PACKET sets the PacketView to on and the data to be seen in the form of fields.

header `property` ¶

header: BusBItemManchesterHeader

Return the BUS:B<x>:MANChester:HEADer command tree.

Usage

Using the .query() method will send the BUS:B<x>:MANChester:HEADer? query.
Using the .verify(value) method will send the BUS:B<x>:MANChester:HEADer? query and raise an AssertionError if the returned value does not match value.

Info

B<x> is the number of the bus.

Sub-properties

.length: The BUS:B<x>:MANChester:HEADer:LENGth command.

idle `property` ¶

idle: BusBItemManchesterIdle

Return the BUS:B<x>:MANChester:IDLE command tree.

Usage

Using the .query() method will send the BUS:B<x>:MANChester:IDLE? query.
Using the .verify(value) method will send the BUS:B<x>:MANChester:IDLE? query and raise an AssertionError if the returned value does not match value.

Info

B<x> is the number of the bus.

Sub-properties

.bits: The BUS:B<x>:MANChester:IDLE:BITS command.

parity `property` ¶

parity: BusBItemManchesterParity

Return the BUS:B<x>:MANChester:parity command.

Description

This command sets or queries the Manchester bus Parity. The bus number is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:MANChester:parity? query.
Using the .verify(value) method will send the BUS:B<x>:MANChester:parity? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:MANChester:parity value command.

SCPI Syntax

- BUS:B<x>:MANChester:parity {ODD|EVEN|NONE}
- BUS:B<x>:MANChester:parity?

Info

ODD sets the number of 1’s to odd.
EVEN sets the number of 1’s to even.
NONE specifies that Parity is not considered.

source `property` ¶

source: BusBItemManchesterSource

Return the BUS:B<x>:MANChester:SOUrce command.

Description

This command sets or queries the Manchester source for the specified bus. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:MANChester:SOUrce? query.
Using the .verify(value) method will send the BUS:B<x>:MANChester:SOUrce? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:MANChester:SOUrce value command.

SCPI Syntax

- BUS:B<x>:MANChester:SOUrce {S<x>_Ch<x>|CH<x>|MATH<x>|REF<x>}
- BUS:B<x>:MANChester:SOUrce?

Info

B<x> is the number of the bus.
S<x>_Ch<x> specifies the remote scope number and the analog channel.
CH<x> specifies an analog channel as the source.
Math<x> specifies a math waveform as the source.
REF<x> specifies a reference waveform as the source.

start `property` ¶

start: BusBItemManchesterStart

Return the BUS:B<x>:MANChester:START command tree.

Usage

Using the .query() method will send the BUS:B<x>:MANChester:START? query.
Using the .verify(value) method will send the BUS:B<x>:MANChester:START? query and raise an AssertionError if the returned value does not match value.

Info

B<x> is the number of the bus.

Sub-properties

.index: The BUS:B<x>:MANChester:START:INDex command.

sync `property` ¶

sync: BusBItemManchesterSync

Return the BUS:B<x>:MANChester:SYNC command tree.

Usage

Using the .query() method will send the BUS:B<x>:MANChester:SYNC? query.
Using the .verify(value) method will send the BUS:B<x>:MANChester:SYNC? query and raise an AssertionError if the returned value does not match value.

Info

B<x> is the number of the bus.

Sub-properties

.size: The BUS:B<x>:MANChester:SYNC:SIZe command.

threshold `property` ¶

threshold: BusBItemManchesterThreshold

Return the BUS:B<x>:MANChester:THReshold command.

Description

This command sets or queries the Manchester threshold for the specified bus. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:MANChester:THReshold? query.
Using the .verify(value) method will send the BUS:B<x>:MANChester:THReshold? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:MANChester:THReshold value command.

SCPI Syntax

- BUS:B<x>:MANChester:THReshold <NR3>
- BUS:B<x>:MANChester:THReshold?

Info

B<x> is the number of the bus.
<NR3> sets the Manchester Strobe threshold for the specified bus in Volts. The argument range is -8V to +8V.

tolerance `property` ¶

tolerance: BusBItemManchesterTolerance

Return the BUS:B<x>:MANChester:TOLerance command.

Description

This command sets or queries the Tolerance bus parameter. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:MANChester:TOLerance? query.
Using the .verify(value) method will send the BUS:B<x>:MANChester:TOLerance? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:MANChester:TOLerance value command.

SCPI Syntax

- BUS:B<x>:MANChester:TOLerance <NR3>
- BUS:B<x>:MANChester:TOLerance?

Info

B<x> is the number of the bus.
<NR3> sets the Tolerance bus parameter.

trailer `property` ¶

trailer: BusBItemManchesterTrailer

Return the BUS:B<x>:MANChester:TRAiler command tree.

Usage

Using the .query() method will send the BUS:B<x>:MANChester:TRAiler? query.
Using the .verify(value) method will send the BUS:B<x>:MANChester:TRAiler? query and raise an AssertionError if the returned value does not match value.

Info

B<x> is the number of the bus.

Sub-properties

.length: The BUS:B<x>:MANChester:TRAiler:LENGth command.

transtion `property` ¶

transtion: BusBItemManchesterTranstion

Return the BUS:B<x>:MANChester:TRANstion command tree.

Usage

Using the .query() method will send the BUS:B<x>:MANChester:TRANstion? query.
Using the .verify(value) method will send the BUS:B<x>:MANChester:TRANstion? query and raise an AssertionError if the returned value does not match value.

Info

B<x> is the number of the bus.

Sub-properties

.zero: The BUS:B<x>:MANChester:TRANstion:ZERo command.

word `property` ¶

word: BusBItemManchesterWord

Return the BUS:B<x>:MANChester:WORD command tree.

Usage

Using the .query() method will send the BUS:B<x>:MANChester:WORD? query.
Using the .verify(value) method will send the BUS:B<x>:MANChester:WORD? query and raise an AssertionError if the returned value does not match value.

Info

B<x> is the number of the bus.

Sub-properties

.count: The BUS:B<x>:MANChester:WORD:COUNt command.

wordsize `property` ¶

wordsize: BusBItemManchesterWordsize

Return the BUS:B<x>:MANChester:WORDSIZe command.

Description

This command sets or queries the Manchester word size in bits. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:MANChester:WORDSIZe? query.
Using the .verify(value) method will send the BUS:B<x>:MANChester:WORDSIZe? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:MANChester:WORDSIZe value command.

SCPI Syntax

- BUS:B<x>:MANChester:WORDSIZe <NR1>
- BUS:B<x>:MANChester:WORDSIZe?

Info

B<x> is the number of the bus.
<NR1> sets the word size in bits.

BusBItemManchesterBitorder ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:MANChester:BITORDer command.

Description

This command sets or queries the Manchester bus Bit Order. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:MANChester:BITORDer? query.
Using the .verify(value) method will send the BUS:B<x>:MANChester:BITORDer? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:MANChester:BITORDer value command.

SCPI Syntax

- BUS:B<x>:MANChester:BITORDer {LSB|MSB}
- BUS:B<x>:MANChester:BITORDer?

Info

B<x> is the number of the bus.
LSB arranges the bits in LSB format, least significant bits first.
MSB arranges the bits in MSB format, most significant bits first.

BusBItemManchesterBitrate ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:MANChester:BITRate command.

Description

This command sets or queries the Manchester bus bit rate. The bus number is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:MANChester:BITRate? query.
Using the .verify(value) method will send the BUS:B<x>:MANChester:BITRate? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:MANChester:BITRate value command.

SCPI Syntax

- BUS:B<x>:MANChester:BITRate <NR1>
- BUS:B<x>:MANChester:BITRate?

Info

B<x> is the number of the bus.
<NR1> sets the bit rate up to 1 Gbps.

BusBItemManchesterDisplaymode ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:MANChester:DISplaymode command.

Description

This command sets or queries the Manchester bus Packet View. The bus number is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:MANChester:DISplaymode? query.
Using the .verify(value) method will send the BUS:B<x>:MANChester:DISplaymode? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:MANChester:DISplaymode value command.

SCPI Syntax

- BUS:B<x>:MANChester:DISplaymode {BITS|PACKET}
- BUS:B<x>:MANChester:DISplaymode?

Info

B<x> is the number of the bus.
BITS sets the PacketView to off and the data to be seen as single bits formats.
PACKET sets the PacketView to on and the data to be seen in the form of fields.

BusBItemManchesterHeader ¶

Bases: SCPICmdRead

The BUS:B<x>:MANChester:HEADer command tree.

Usage

Using the .query() method will send the BUS:B<x>:MANChester:HEADer? query.
Using the .verify(value) method will send the BUS:B<x>:MANChester:HEADer? query and raise an AssertionError if the returned value does not match value.

Info

B<x> is the number of the bus.

Properties

.length: The BUS:B<x>:MANChester:HEADer:LENGth command.

length `property` ¶

length: BusBItemManchesterHeaderLength

Return the BUS:B<x>:MANChester:HEADer:LENGth command.

Description

This command sets or queries the Manchester header length in bits. The bus number is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:MANChester:HEADer:LENGth? query.
Using the .verify(value) method will send the BUS:B<x>:MANChester:HEADer:LENGth? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:MANChester:HEADer:LENGth value command.

SCPI Syntax

- BUS:B<x>:MANChester:HEADer:LENGth <NR1>
- BUS:B<x>:MANChester:HEADer:LENGth?

Info

B<x> is the number of the bus.
<NR1> sets the header length in bits.

BusBItemManchesterHeaderLength ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:MANChester:HEADer:LENGth command.

Description

This command sets or queries the Manchester header length in bits. The bus number is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:MANChester:HEADer:LENGth? query.
Using the .verify(value) method will send the BUS:B<x>:MANChester:HEADer:LENGth? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:MANChester:HEADer:LENGth value command.

SCPI Syntax

- BUS:B<x>:MANChester:HEADer:LENGth <NR1>
- BUS:B<x>:MANChester:HEADer:LENGth?

Info

B<x> is the number of the bus.
<NR1> sets the header length in bits.

BusBItemManchesterIdle ¶

Bases: SCPICmdRead

The BUS:B<x>:MANChester:IDLE command tree.

Usage

Using the .query() method will send the BUS:B<x>:MANChester:IDLE? query.
Using the .verify(value) method will send the BUS:B<x>:MANChester:IDLE? query and raise an AssertionError if the returned value does not match value.

Info

B<x> is the number of the bus.

Properties

.bits: The BUS:B<x>:MANChester:IDLE:BITS command.

bits `property` ¶

bits: BusBItemManchesterIdleBits

Return the BUS:B<x>:MANChester:IDLE:BITS command.

Description

This command sets or queries the Manchester idle bit size in bits. The bus number is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:MANChester:IDLE:BITS? query.
Using the .verify(value) method will send the BUS:B<x>:MANChester:IDLE:BITS? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:MANChester:IDLE:BITS value command.

SCPI Syntax

- BUS:B<x>:MANChester:IDLE:BITS <NR1>
- BUS:B<x>:MANChester:IDLE:BITS?

Info

B<x> is the number of the bus.
<NR1> sets the idle bit size.

BusBItemManchesterIdleBits ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:MANChester:IDLE:BITS command.

Description

This command sets or queries the Manchester idle bit size in bits. The bus number is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:MANChester:IDLE:BITS? query.
Using the .verify(value) method will send the BUS:B<x>:MANChester:IDLE:BITS? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:MANChester:IDLE:BITS value command.

SCPI Syntax

- BUS:B<x>:MANChester:IDLE:BITS <NR1>
- BUS:B<x>:MANChester:IDLE:BITS?

Info

B<x> is the number of the bus.
<NR1> sets the idle bit size.

BusBItemManchesterParity ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:MANChester:parity command.

Description

This command sets or queries the Manchester bus Parity. The bus number is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:MANChester:parity? query.
Using the .verify(value) method will send the BUS:B<x>:MANChester:parity? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:MANChester:parity value command.

SCPI Syntax

- BUS:B<x>:MANChester:parity {ODD|EVEN|NONE}
- BUS:B<x>:MANChester:parity?

Info

ODD sets the number of 1’s to odd.
EVEN sets the number of 1’s to even.
NONE specifies that Parity is not considered.

BusBItemManchesterSource ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:MANChester:SOUrce command.

Description

This command sets or queries the Manchester source for the specified bus. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:MANChester:SOUrce? query.
Using the .verify(value) method will send the BUS:B<x>:MANChester:SOUrce? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:MANChester:SOUrce value command.

SCPI Syntax

- BUS:B<x>:MANChester:SOUrce {S<x>_Ch<x>|CH<x>|MATH<x>|REF<x>}
- BUS:B<x>:MANChester:SOUrce?

Info

B<x> is the number of the bus.
S<x>_Ch<x> specifies the remote scope number and the analog channel.
CH<x> specifies an analog channel as the source.
Math<x> specifies a math waveform as the source.
REF<x> specifies a reference waveform as the source.

BusBItemManchesterStart ¶

Bases: SCPICmdRead

The BUS:B<x>:MANChester:START command tree.

Usage

Using the .query() method will send the BUS:B<x>:MANChester:START? query.
Using the .verify(value) method will send the BUS:B<x>:MANChester:START? query and raise an AssertionError if the returned value does not match value.

Info

B<x> is the number of the bus.

Properties

.index: The BUS:B<x>:MANChester:START:INDex command.

index `property` ¶

index: BusBItemManchesterStartIndex

Return the BUS:B<x>:MANChester:START:INDex command.

Description

This command sets or queries the Manchester start Index in bits. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:MANChester:START:INDex? query.
Using the .verify(value) method will send the BUS:B<x>:MANChester:START:INDex? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:MANChester:START:INDex value command.

SCPI Syntax

- BUS:B<x>:MANChester:START:INDex <NR1>
- BUS:B<x>:MANChester:START:INDex?

Info

B<x> is the number of the bus.
<NR1> sets the start Index in bits.

BusBItemManchesterStartIndex ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:MANChester:START:INDex command.

Description

This command sets or queries the Manchester start Index in bits. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:MANChester:START:INDex? query.
Using the .verify(value) method will send the BUS:B<x>:MANChester:START:INDex? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:MANChester:START:INDex value command.

SCPI Syntax

- BUS:B<x>:MANChester:START:INDex <NR1>
- BUS:B<x>:MANChester:START:INDex?

Info

B<x> is the number of the bus.
<NR1> sets the start Index in bits.

BusBItemManchesterSync ¶

Bases: SCPICmdRead

The BUS:B<x>:MANChester:SYNC command tree.

Usage

Using the .query() method will send the BUS:B<x>:MANChester:SYNC? query.
Using the .verify(value) method will send the BUS:B<x>:MANChester:SYNC? query and raise an AssertionError if the returned value does not match value.

Info

B<x> is the number of the bus.

Properties

.size: The BUS:B<x>:MANChester:SYNC:SIZe command.

size `property` ¶

size: BusBItemManchesterSyncSize

Return the BUS:B<x>:MANChester:SYNC:SIZe command.

Description

This command sets or queries the Manchester sync Bit Size in bits. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:MANChester:SYNC:SIZe? query.
Using the .verify(value) method will send the BUS:B<x>:MANChester:SYNC:SIZe? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:MANChester:SYNC:SIZe value command.

SCPI Syntax

- BUS:B<x>:MANChester:SYNC:SIZe <NR1>
- BUS:B<x>:MANChester:SYNC:SIZe?

Info

B<x> is the number of the bus.
<NR1> sets the Bit Size in bits.

BusBItemManchesterSyncSize ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:MANChester:SYNC:SIZe command.

Description

This command sets or queries the Manchester sync Bit Size in bits. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:MANChester:SYNC:SIZe? query.
Using the .verify(value) method will send the BUS:B<x>:MANChester:SYNC:SIZe? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:MANChester:SYNC:SIZe value command.

SCPI Syntax

- BUS:B<x>:MANChester:SYNC:SIZe <NR1>
- BUS:B<x>:MANChester:SYNC:SIZe?

Info

B<x> is the number of the bus.
<NR1> sets the Bit Size in bits.

BusBItemManchesterThreshold ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:MANChester:THReshold command.

Description

This command sets or queries the Manchester threshold for the specified bus. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:MANChester:THReshold? query.
Using the .verify(value) method will send the BUS:B<x>:MANChester:THReshold? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:MANChester:THReshold value command.

SCPI Syntax

- BUS:B<x>:MANChester:THReshold <NR3>
- BUS:B<x>:MANChester:THReshold?

Info

B<x> is the number of the bus.
<NR3> sets the Manchester Strobe threshold for the specified bus in Volts. The argument range is -8V to +8V.

BusBItemManchesterTolerance ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:MANChester:TOLerance command.

Description

This command sets or queries the Tolerance bus parameter. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:MANChester:TOLerance? query.
Using the .verify(value) method will send the BUS:B<x>:MANChester:TOLerance? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:MANChester:TOLerance value command.

SCPI Syntax

- BUS:B<x>:MANChester:TOLerance <NR3>
- BUS:B<x>:MANChester:TOLerance?

Info

B<x> is the number of the bus.
<NR3> sets the Tolerance bus parameter.

BusBItemManchesterTrailer ¶

Bases: SCPICmdRead

The BUS:B<x>:MANChester:TRAiler command tree.

Usage

Using the .query() method will send the BUS:B<x>:MANChester:TRAiler? query.
Using the .verify(value) method will send the BUS:B<x>:MANChester:TRAiler? query and raise an AssertionError if the returned value does not match value.

Info

B<x> is the number of the bus.

Properties

.length: The BUS:B<x>:MANChester:TRAiler:LENGth command.

length `property` ¶

length: BusBItemManchesterTrailerLength

Return the BUS:B<x>:MANChester:TRAiler:LENGth command.

Description

This command sets or queries the Manchester trailer length in bits. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:MANChester:TRAiler:LENGth? query.
Using the .verify(value) method will send the BUS:B<x>:MANChester:TRAiler:LENGth? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:MANChester:TRAiler:LENGth value command.

SCPI Syntax

- BUS:B<x>:MANChester:TRAiler:LENGth <NR1>
- BUS:B<x>:MANChester:TRAiler:LENGth?

Info

B<x> is the number of the bus.
<NR1> sets the trailer length in bits.

BusBItemManchesterTrailerLength ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:MANChester:TRAiler:LENGth command.

Description

This command sets or queries the Manchester trailer length in bits. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:MANChester:TRAiler:LENGth? query.
Using the .verify(value) method will send the BUS:B<x>:MANChester:TRAiler:LENGth? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:MANChester:TRAiler:LENGth value command.

SCPI Syntax

- BUS:B<x>:MANChester:TRAiler:LENGth <NR1>
- BUS:B<x>:MANChester:TRAiler:LENGth?

Info

B<x> is the number of the bus.
<NR1> sets the trailer length in bits.

BusBItemManchesterTranstion ¶

Bases: SCPICmdRead

The BUS:B<x>:MANChester:TRANstion command tree.

Usage

Using the .query() method will send the BUS:B<x>:MANChester:TRANstion? query.
Using the .verify(value) method will send the BUS:B<x>:MANChester:TRANstion? query and raise an AssertionError if the returned value does not match value.

Info

B<x> is the number of the bus.

Properties

.zero: The BUS:B<x>:MANChester:TRANstion:ZERo command.

zero `property` ¶

zero: BusBItemManchesterTranstionZero

Return the BUS:B<x>:MANChester:TRANstion:ZERo command.

Description

This command sets or queries the Manchester bus for zero falling or rising. Manchester bit are defined by transition in the middle of the bit. Depending on the transition, conventions are defined. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:MANChester:TRANstion:ZERo? query.
Using the .verify(value) method will send the BUS:B<x>:MANChester:TRANstion:ZERo? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:MANChester:TRANstion:ZERo value command.

SCPI Syntax

- BUS:B<x>:MANChester:TRANstion:ZERo {FALLing|RISing}
- BUS:B<x>:MANChester:TRANstion:ZERo?

Info

B<x> is the number of the bus.
FALLing sets Falling as 0.
RISing sets Rising as 0.

BusBItemManchesterTranstionZero ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:MANChester:TRANstion:ZERo command.

Description

This command sets or queries the Manchester bus for zero falling or rising. Manchester bit are defined by transition in the middle of the bit. Depending on the transition, conventions are defined. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:MANChester:TRANstion:ZERo? query.
Using the .verify(value) method will send the BUS:B<x>:MANChester:TRANstion:ZERo? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:MANChester:TRANstion:ZERo value command.

SCPI Syntax

- BUS:B<x>:MANChester:TRANstion:ZERo {FALLing|RISing}
- BUS:B<x>:MANChester:TRANstion:ZERo?

Info

B<x> is the number of the bus.
FALLing sets Falling as 0.
RISing sets Rising as 0.

BusBItemManchesterWord ¶

Bases: SCPICmdRead

The BUS:B<x>:MANChester:WORD command tree.

Usage

Using the .query() method will send the BUS:B<x>:MANChester:WORD? query.
Using the .verify(value) method will send the BUS:B<x>:MANChester:WORD? query and raise an AssertionError if the returned value does not match value.

Info

B<x> is the number of the bus.

Properties

.count: The BUS:B<x>:MANChester:WORD:COUNt command.

count `property` ¶

count: BusBItemManchesterWordCount

Return the BUS:B<x>:MANChester:WORD:COUNt command.

Description

This command sets or queries the Manchester word count in bits. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:MANChester:WORD:COUNt? query.
Using the .verify(value) method will send the BUS:B<x>:MANChester:WORD:COUNt? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:MANChester:WORD:COUNt value command.

SCPI Syntax

- BUS:B<x>:MANChester:WORD:COUNt <NR1>
- BUS:B<x>:MANChester:WORD:COUNt?

Info

B<x> is the number of the bus.
<NR1> sets the word count in bits.

BusBItemManchesterWordCount ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:MANChester:WORD:COUNt command.

Description

This command sets or queries the Manchester word count in bits. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:MANChester:WORD:COUNt? query.
Using the .verify(value) method will send the BUS:B<x>:MANChester:WORD:COUNt? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:MANChester:WORD:COUNt value command.

SCPI Syntax

- BUS:B<x>:MANChester:WORD:COUNt <NR1>
- BUS:B<x>:MANChester:WORD:COUNt?

Info

B<x> is the number of the bus.
<NR1> sets the word count in bits.

BusBItemManchesterWordsize ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:MANChester:WORDSIZe command.

Description

This command sets or queries the Manchester word size in bits. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:MANChester:WORDSIZe? query.
Using the .verify(value) method will send the BUS:B<x>:MANChester:WORDSIZe? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:MANChester:WORDSIZe value command.

SCPI Syntax

- BUS:B<x>:MANChester:WORDSIZe <NR1>
- BUS:B<x>:MANChester:WORDSIZe?

Info

B<x> is the number of the bus.
<NR1> sets the word size in bits.

BusBItemMdio ¶

Bases: SCPICmdRead

The BUS:B<x>:MDIO command tree.

Usage

Using the .query() method will send the BUS:B<x>:MDIO? query.
Using the .verify(value) method will send the BUS:B<x>:MDIO? query and raise an AssertionError if the returned value does not match value.

Info

B<x> is the number of the bus.

Properties

.clock: The BUS:B<x>:MDIO:CLOCk command tree.
.data: The BUS:B<x>:MDIO:DATA command tree.

clock `property` ¶

clock: BusBItemMdioClock

Return the BUS:B<x>:MDIO:CLOCk command tree.

Usage

Using the .query() method will send the BUS:B<x>:MDIO:CLOCk? query.
Using the .verify(value) method will send the BUS:B<x>:MDIO:CLOCk? query and raise an AssertionError if the returned value does not match value.

Info

B<x> is the number of the bus.

Sub-properties

.source: The BUS:B<x>:MDIO:CLOCk:SOUrce command.
.threshold: The BUS:B<x>:MDIO:CLOCk:THReshold command.

data `property` ¶

data: BusBItemMdioData

Return the BUS:B<x>:MDIO:DATA command tree.

Usage

Using the .query() method will send the BUS:B<x>:MDIO:DATA? query.
Using the .verify(value) method will send the BUS:B<x>:MDIO:DATA? query and raise an AssertionError if the returned value does not match value.

Info

B<x> is the number of the bus.

Sub-properties

.source: The BUS:B<x>:MDIO:DATA:SOUrce command.
.threshold: The BUS:B<x>:MDIO:DATA:THReshold command.

BusBItemMdioClock ¶

Bases: SCPICmdRead

The BUS:B<x>:MDIO:CLOCk command tree.

Usage

Using the .query() method will send the BUS:B<x>:MDIO:CLOCk? query.
Using the .verify(value) method will send the BUS:B<x>:MDIO:CLOCk? query and raise an AssertionError if the returned value does not match value.

Info

B<x> is the number of the bus.

Properties

.source: The BUS:B<x>:MDIO:CLOCk:SOUrce command.
.threshold: The BUS:B<x>:MDIO:CLOCk:THReshold command.

source `property` ¶

source: BusBItemMdioClockSource

Return the BUS:B<x>:MDIO:CLOCk:SOUrce command.

Description

This command sets or queries the MDIO Clock source for the specified bus. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:MDIO:CLOCk:SOUrce? query.
Using the .verify(value) method will send the BUS:B<x>:MDIO:CLOCk:SOUrce? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:MDIO:CLOCk:SOUrce value command.

SCPI Syntax

- BUS:B<x>:MDIO:CLOCk:SOUrce {S<x>_Ch<x>|CH<x>|MATH<x>|REF<x>}
- BUS:B<x>:MDIO:CLOCk:SOUrce?

Info

B<x> is the number of the bus.
S<x>_Ch<x> specifies the remote scope number and the analog channel.
CH<x> specifies an analog channel as the Clock source.
Math<x> specifies a math waveform as the Clock source.
REF<x> specifies a reference waveform as the Clock source.

threshold `property` ¶

threshold: BusBItemMdioClockThreshold

Return the BUS:B<x>:MDIO:CLOCk:THReshold command.

Description

This command sets or queries the MDIO clock source threshold for the specified bus. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:MDIO:CLOCk:THReshold? query.
Using the .verify(value) method will send the BUS:B<x>:MDIO:CLOCk:THReshold? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:MDIO:CLOCk:THReshold value command.

SCPI Syntax

- BUS:B<x>:MDIO:CLOCk:THReshold <NR3>
- BUS:B<x>:MDIO:CLOCk:THReshold?

Info

B<x> is the number of the bus.
<NR3> is the clock source threshold for the specified bus. The argument range is -8V to +8V.

BusBItemMdioClockSource ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:MDIO:CLOCk:SOUrce command.

Description

This command sets or queries the MDIO Clock source for the specified bus. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:MDIO:CLOCk:SOUrce? query.
Using the .verify(value) method will send the BUS:B<x>:MDIO:CLOCk:SOUrce? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:MDIO:CLOCk:SOUrce value command.

SCPI Syntax

- BUS:B<x>:MDIO:CLOCk:SOUrce {S<x>_Ch<x>|CH<x>|MATH<x>|REF<x>}
- BUS:B<x>:MDIO:CLOCk:SOUrce?

Info

B<x> is the number of the bus.
S<x>_Ch<x> specifies the remote scope number and the analog channel.
CH<x> specifies an analog channel as the Clock source.
Math<x> specifies a math waveform as the Clock source.
REF<x> specifies a reference waveform as the Clock source.

BusBItemMdioClockThreshold ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:MDIO:CLOCk:THReshold command.

Description

This command sets or queries the MDIO clock source threshold for the specified bus. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:MDIO:CLOCk:THReshold? query.
Using the .verify(value) method will send the BUS:B<x>:MDIO:CLOCk:THReshold? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:MDIO:CLOCk:THReshold value command.

SCPI Syntax

- BUS:B<x>:MDIO:CLOCk:THReshold <NR3>
- BUS:B<x>:MDIO:CLOCk:THReshold?

Info

B<x> is the number of the bus.
<NR3> is the clock source threshold for the specified bus. The argument range is -8V to +8V.

BusBItemMdioData ¶

Bases: SCPICmdRead

The BUS:B<x>:MDIO:DATA command tree.

Usage

Using the .query() method will send the BUS:B<x>:MDIO:DATA? query.
Using the .verify(value) method will send the BUS:B<x>:MDIO:DATA? query and raise an AssertionError if the returned value does not match value.

Info

B<x> is the number of the bus.

Properties

.source: The BUS:B<x>:MDIO:DATA:SOUrce command.
.threshold: The BUS:B<x>:MDIO:DATA:THReshold command.

source `property` ¶

source: BusBItemMdioDataSource

Return the BUS:B<x>:MDIO:DATA:SOUrce command.

Description

This command sets or queries the data for the specified bus. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:MDIO:DATA:SOUrce? query.
Using the .verify(value) method will send the BUS:B<x>:MDIO:DATA:SOUrce? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:MDIO:DATA:SOUrce value command.

SCPI Syntax

- BUS:B<x>:MDIO:DATA:SOUrce {S<x>_Ch<x>|CH<x>|MATH<x>|REF<x>}
- BUS:B<x>:MDIO:DATA:SOUrce?

Info

B<x> is the number of the bus.
S<x>_Ch<x> specifies the remote scope number and the analog channel.
CH<x> specifies an analog channel as the data source.
Math<x> specifies a math waveform as the data source.
REF<x> specifies a reference waveform as the data source.

threshold `property` ¶

threshold: BusBItemMdioDataThreshold

Return the BUS:B<x>:MDIO:DATA:THReshold command.

Description

This command sets or queries the MDIO Data source threshold for the specified bus. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:MDIO:DATA:THReshold? query.
Using the .verify(value) method will send the BUS:B<x>:MDIO:DATA:THReshold? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:MDIO:DATA:THReshold value command.

SCPI Syntax

- BUS:B<x>:MDIO:DATA:THReshold <NR3>
- BUS:B<x>:MDIO:DATA:THReshold?

Info

B<x> is the number of the bus.
<NR3> is the data source threshold for the specified bus. The argument range is -8V to +8V.

BusBItemMdioDataSource ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:MDIO:DATA:SOUrce command.

Description

This command sets or queries the data for the specified bus. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:MDIO:DATA:SOUrce? query.
Using the .verify(value) method will send the BUS:B<x>:MDIO:DATA:SOUrce? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:MDIO:DATA:SOUrce value command.

SCPI Syntax

- BUS:B<x>:MDIO:DATA:SOUrce {S<x>_Ch<x>|CH<x>|MATH<x>|REF<x>}
- BUS:B<x>:MDIO:DATA:SOUrce?

Info

B<x> is the number of the bus.
S<x>_Ch<x> specifies the remote scope number and the analog channel.
CH<x> specifies an analog channel as the data source.
Math<x> specifies a math waveform as the data source.
REF<x> specifies a reference waveform as the data source.

BusBItemMdioDataThreshold ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:MDIO:DATA:THReshold command.

Description

This command sets or queries the MDIO Data source threshold for the specified bus. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:MDIO:DATA:THReshold? query.
Using the .verify(value) method will send the BUS:B<x>:MDIO:DATA:THReshold? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:MDIO:DATA:THReshold value command.

SCPI Syntax

- BUS:B<x>:MDIO:DATA:THReshold <NR3>
- BUS:B<x>:MDIO:DATA:THReshold?

Info

B<x> is the number of the bus.
<NR3> is the data source threshold for the specified bus. The argument range is -8V to +8V.

BusBItemMil1553b ¶

Bases: SCPICmdRead

The BUS:B<x>:MIL1553B command tree.

Usage

Using the .query() method will send the BUS:B<x>:MIL1553B? query.
Using the .verify(value) method will send the BUS:B<x>:MIL1553B? query and raise an AssertionError if the returned value does not match value.

Info

B<x> is the number of the bus.

Properties

.lowthreshold: The BUS:B<x>:MIL1553B:LOWTHRESHold command.
.polarity: The BUS:B<x>:MIL1553B:POLarity command.
.responsetime: The BUS:B<x>:MIL1553B:RESPonsetime command tree.
.source: The BUS:B<x>:MIL1553B:SOUrce command.
.threshold: The BUS:B<x>:MIL1553B:THRESHold command.

lowthreshold `property` ¶

lowthreshold: BusBItemMil1553bLowthreshold

Return the BUS:B<x>:MIL1553B:LOWTHRESHold command.

Description

This command sets or queries the MIL-STD-1553 lower threshold for the specified bus. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:MIL1553B:LOWTHRESHold? query.
Using the .verify(value) method will send the BUS:B<x>:MIL1553B:LOWTHRESHold? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:MIL1553B:LOWTHRESHold value command.

SCPI Syntax

- BUS:B<x>:MIL1553B:LOWTHRESHold <NR3>
- BUS:B<x>:MIL1553B:LOWTHRESHold?

Info

B<x> is the number of the bus.
<NR3> is the MIL-STD-1553 lower threshold for the specified bus.

polarity `property` ¶

polarity: BusBItemMil1553bPolarity

Return the BUS:B<x>:MIL1553B:POLarity command.

Description

This command sets the polarity of the MIL-STD-1553 bus (normal or inverted).

Usage

Using the .query() method will send the BUS:B<x>:MIL1553B:POLarity? query.
Using the .verify(value) method will send the BUS:B<x>:MIL1553B:POLarity? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:MIL1553B:POLarity value command.

SCPI Syntax

- BUS:B<x>:MIL1553B:POLarity {NORMal|INVERTed}
- BUS:B<x>:MIL1553B:POLarity?

Info

B<x> is the number of the bus.
NORMal - A high-low transition represents a 1 on the Data+ line.
INVERTed - A high-low transition represents a 0 on the Data+ line.

responsetime `property` ¶

responsetime: BusBItemMil1553bResponsetime

Return the BUS:B<x>:MIL1553B:RESPonsetime command tree.

Usage

Using the .query() method will send the BUS:B<x>:MIL1553B:RESPonsetime? query.
Using the .verify(value) method will send the BUS:B<x>:MIL1553B:RESPonsetime? query and raise an AssertionError if the returned value does not match value.

Info

B<x> is the number of the bus.

Sub-properties

.maximum: The BUS:B<x>:MIL1553B:RESPonsetime:MAXimum command.
.minimum: The BUS:B<x>:MIL1553B:RESPonsetime:MINimum command.

source `property` ¶

source: BusBItemMil1553bSource

Return the BUS:B<x>:MIL1553B:SOUrce command.

Description

This command sets or queries the source for the specified MIL-STD-1553 bus. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:MIL1553B:SOUrce? query.
Using the .verify(value) method will send the BUS:B<x>:MIL1553B:SOUrce? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:MIL1553B:SOUrce value command.

SCPI Syntax

- BUS:B<x>:MIL1553B:SOUrce {S<x>_Ch<x>|CH<x>|MATH<x>|REF<x>}
- BUS:B<x>:MIL1553B:SOUrce?

Info

B<x> is the number of the bus.
S<x>_Ch<x> specifies the remote scope number and the analog channel.
CH<x> specifies an analog channel as the source waveform for the MIL-STD-1553 bus.
Math<x> specifies a math waveform as the source waveform for the MIL-STD-1553 bus.
REF<x> specifies a reference waveform as the source waveform for the MIL-STD-1553 bus.

threshold `property` ¶

threshold: BusBItemMil1553bThreshold

Return the BUS:B<x>:MIL1553B:THRESHold command.

Description

This command sets or queries the MIL-STD-1553 upper threshold for the specified bus. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:MIL1553B:THRESHold? query.
Using the .verify(value) method will send the BUS:B<x>:MIL1553B:THRESHold? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:MIL1553B:THRESHold value command.

SCPI Syntax

- BUS:B<x>:MIL1553B:THRESHold <NR3>
- BUS:B<x>:MIL1553B:THRESHold?

Info

B<x> is the number of the bus.
<NR3> is the MIL-STD-1553 upper threshold for the specified bus.

BusBItemMil1553bLowthreshold ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:MIL1553B:LOWTHRESHold command.

Description

This command sets or queries the MIL-STD-1553 lower threshold for the specified bus. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:MIL1553B:LOWTHRESHold? query.
Using the .verify(value) method will send the BUS:B<x>:MIL1553B:LOWTHRESHold? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:MIL1553B:LOWTHRESHold value command.

SCPI Syntax

- BUS:B<x>:MIL1553B:LOWTHRESHold <NR3>
- BUS:B<x>:MIL1553B:LOWTHRESHold?

Info

B<x> is the number of the bus.
<NR3> is the MIL-STD-1553 lower threshold for the specified bus.

BusBItemMil1553bPolarity ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:MIL1553B:POLarity command.

Description

This command sets the polarity of the MIL-STD-1553 bus (normal or inverted).

Usage

Using the .query() method will send the BUS:B<x>:MIL1553B:POLarity? query.
Using the .verify(value) method will send the BUS:B<x>:MIL1553B:POLarity? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:MIL1553B:POLarity value command.

SCPI Syntax

- BUS:B<x>:MIL1553B:POLarity {NORMal|INVERTed}
- BUS:B<x>:MIL1553B:POLarity?

Info

B<x> is the number of the bus.
NORMal - A high-low transition represents a 1 on the Data+ line.
INVERTed - A high-low transition represents a 0 on the Data+ line.

BusBItemMil1553bResponsetime ¶

Bases: SCPICmdRead

The BUS:B<x>:MIL1553B:RESPonsetime command tree.

Usage

Using the .query() method will send the BUS:B<x>:MIL1553B:RESPonsetime? query.
Using the .verify(value) method will send the BUS:B<x>:MIL1553B:RESPonsetime? query and raise an AssertionError if the returned value does not match value.

Info

B<x> is the number of the bus.

Properties

.maximum: The BUS:B<x>:MIL1553B:RESPonsetime:MAXimum command.
.minimum: The BUS:B<x>:MIL1553B:RESPonsetime:MINimum command.

maximum `property` ¶

maximum: BusBItemMil1553bResponsetimeMaximum

Return the BUS:B<x>:MIL1553B:RESPonsetime:MAXimum command.

Description

This command specifies the maximum response time to a valid command issued for the MIL-STD-1553 bus.

Usage

Using the .query() method will send the BUS:B<x>:MIL1553B:RESPonsetime:MAXimum? query.
Using the .verify(value) method will send the BUS:B<x>:MIL1553B:RESPonsetime:MAXimum? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:MIL1553B:RESPonsetime:MAXimum value command.

SCPI Syntax

- BUS:B<x>:MIL1553B:RESPonsetime:MAXimum <NR3>
- BUS:B<x>:MIL1553B:RESPonsetime:MAXimum?

Info

B<x> is the number of the bus.
<NR3> is a floating point number that specifies the maximum response time, in seconds.

minimum `property` ¶

minimum: BusBItemMil1553bResponsetimeMinimum

Return the BUS:B<x>:MIL1553B:RESPonsetime:MINimum command.

Description

This command specifies the minimum response time to a valid command issued for the MIL-STD-1553 bus.

Usage

Using the .query() method will send the BUS:B<x>:MIL1553B:RESPonsetime:MINimum? query.
Using the .verify(value) method will send the BUS:B<x>:MIL1553B:RESPonsetime:MINimum? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:MIL1553B:RESPonsetime:MINimum value command.

SCPI Syntax

- BUS:B<x>:MIL1553B:RESPonsetime:MINimum <NR3>
- BUS:B<x>:MIL1553B:RESPonsetime:MINimum?

Info

B<x> is the Bus number.
<NR3> is a floating point number that specifies the minimum response time, in seconds.

BusBItemMil1553bResponsetimeMaximum ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:MIL1553B:RESPonsetime:MAXimum command.

Description

This command specifies the maximum response time to a valid command issued for the MIL-STD-1553 bus.

Usage

Using the .query() method will send the BUS:B<x>:MIL1553B:RESPonsetime:MAXimum? query.
Using the .verify(value) method will send the BUS:B<x>:MIL1553B:RESPonsetime:MAXimum? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:MIL1553B:RESPonsetime:MAXimum value command.

SCPI Syntax

- BUS:B<x>:MIL1553B:RESPonsetime:MAXimum <NR3>
- BUS:B<x>:MIL1553B:RESPonsetime:MAXimum?

Info

B<x> is the number of the bus.
<NR3> is a floating point number that specifies the maximum response time, in seconds.

BusBItemMil1553bResponsetimeMinimum ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:MIL1553B:RESPonsetime:MINimum command.

Description

This command specifies the minimum response time to a valid command issued for the MIL-STD-1553 bus.

Usage

Using the .query() method will send the BUS:B<x>:MIL1553B:RESPonsetime:MINimum? query.
Using the .verify(value) method will send the BUS:B<x>:MIL1553B:RESPonsetime:MINimum? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:MIL1553B:RESPonsetime:MINimum value command.

SCPI Syntax

- BUS:B<x>:MIL1553B:RESPonsetime:MINimum <NR3>
- BUS:B<x>:MIL1553B:RESPonsetime:MINimum?

Info

B<x> is the Bus number.
<NR3> is a floating point number that specifies the minimum response time, in seconds.

BusBItemMil1553bSource ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:MIL1553B:SOUrce command.

Description

This command sets or queries the source for the specified MIL-STD-1553 bus. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:MIL1553B:SOUrce? query.
Using the .verify(value) method will send the BUS:B<x>:MIL1553B:SOUrce? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:MIL1553B:SOUrce value command.

SCPI Syntax

- BUS:B<x>:MIL1553B:SOUrce {S<x>_Ch<x>|CH<x>|MATH<x>|REF<x>}
- BUS:B<x>:MIL1553B:SOUrce?

Info

B<x> is the number of the bus.
S<x>_Ch<x> specifies the remote scope number and the analog channel.
CH<x> specifies an analog channel as the source waveform for the MIL-STD-1553 bus.
Math<x> specifies a math waveform as the source waveform for the MIL-STD-1553 bus.
REF<x> specifies a reference waveform as the source waveform for the MIL-STD-1553 bus.

BusBItemMil1553bThreshold ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:MIL1553B:THRESHold command.

Description

This command sets or queries the MIL-STD-1553 upper threshold for the specified bus. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:MIL1553B:THRESHold? query.
Using the .verify(value) method will send the BUS:B<x>:MIL1553B:THRESHold? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:MIL1553B:THRESHold value command.

SCPI Syntax

- BUS:B<x>:MIL1553B:THRESHold <NR3>
- BUS:B<x>:MIL1553B:THRESHold?

Info

B<x> is the number of the bus.
<NR3> is the MIL-STD-1553 upper threshold for the specified bus.

BusBItemNrz ¶

Bases: SCPICmdRead

The BUS:B<x>:NRZ command tree.

Usage

Using the .query() method will send the BUS:B<x>:NRZ? query.
Using the .verify(value) method will send the BUS:B<x>:NRZ? query and raise an AssertionError if the returned value does not match value.

Info

B<x> is the number of the bus.

Properties

.bitorder: The BUS:B<x>:NRZ:BITOrder command.
.bitrate: The BUS:B<x>:NRZ:BITRate command.
.polarity: The BUS:B<x>:NRZ:POLarity command.
.source: The BUS:B<x>:NRZ:SOUrce command.
.spmi: The BUS:B<x>:NRZ:SPMI command tree.
.threshold: The BUS:B<x>:NRZ:THReshold command.

bitorder `property` ¶

bitorder: BusBItemNrzBitorder

Return the BUS:B<x>:NRZ:BITOrder command.

Description

This command sets or queries the NRZ bit order for the specified bus. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:NRZ:BITOrder? query.
Using the .verify(value) method will send the BUS:B<x>:NRZ:BITOrder? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:NRZ:BITOrder value command.

SCPI Syntax

- BUS:B<x>:NRZ:BITOrder {LSB|MSB}
- BUS:B<x>:NRZ:BITOrder?

Info

B<x> is the number of the bus.
LSB specifies that each bit becomes the recovered value’s new LSB, after shifting previously recovered bits one place to the left. The decoding happens right to left.
MSB specifies that each successive bit from the bus’s data line becomes the new MSB of the recovered value, shifting any previously recovered bits one place to the right. The decoding happens left to right.

bitrate `property` ¶

bitrate: BusBItemNrzBitrate

Return the BUS:B<x>:NRZ:BITRate command.

Description

This command sets or queries the NRZ bus bit rate. The bus number is specified by .

Usage

Using the .query() method will send the BUS:B<x>:NRZ:BITRate? query.
Using the .verify(value) method will send the BUS:B<x>:NRZ:BITRate? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:NRZ:BITRate value command.

SCPI Syntax

- BUS:B<x>:NRZ:BITRate <NR1>
- BUS:B<x>:NRZ:BITRate?

Info

B<x> is the number of the bus.
<NR1> specifies the bit rate for the NRZ bus. Arguments are the available bit rates up to 1 G.

polarity `property` ¶

polarity: BusBItemNrzPolarity

Return the BUS:B<x>:NRZ:POLarity command.

Description

This command sets or queries the NRZ source polarity for the specified bus. The bus number is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:NRZ:POLarity? query.
Using the .verify(value) method will send the BUS:B<x>:NRZ:POLarity? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:NRZ:POLarity value command.

SCPI Syntax

- BUS:B<x>:NRZ:POLarity {INVerted|NORmal}
- BUS:B<x>:NRZ:POLarity?

Info

B<x> is the number of the bus.
INVerted specifies inverted polarity.
NORmal specifies normal polarity.

source `property` ¶

source: BusBItemNrzSource

Return the BUS:B<x>:NRZ:SOUrce command.

Description

This command sets or queries the NRZ source for the specified bus. This command specifies the source channel. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:NRZ:SOUrce? query.
Using the .verify(value) method will send the BUS:B<x>:NRZ:SOUrce? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:NRZ:SOUrce value command.

SCPI Syntax

- BUS:B<x>:NRZ:SOUrce {S<x>_Ch<x>|CH<x>|MATH<x>|REF<x>]
- BUS:B<x>:NRZ:SOUrce?

Info

B<x> is the number of the bus.
S<x>_Ch<x> specifies the remote scope number and the analog channel as the source.
CH<x> specifies an analog channel as the source.
MATH<x> specifies a math waveform as the source.
REF<x> specifies a digital reference waveform as the source.

spmi `property` ¶

spmi: BusBItemNrzSpmi

Return the BUS:B<x>:NRZ:SPMI command tree.

Usage

Using the .query() method will send the BUS:B<x>:NRZ:SPMI? query.
Using the .verify(value) method will send the BUS:B<x>:NRZ:SPMI? query and raise an AssertionError if the returned value does not match value.

Info

B<x> is the number of the bus.

Sub-properties

.version: The BUS:B<x>:NRZ:SPMI:VERsion command.

threshold `property` ¶

threshold: BusBItemNrzThreshold

Return the BUS:B<x>:NRZ:THReshold command.

Description

This command sets or queries the NRZ threshold for the specified bus. The bus number is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:NRZ:THReshold? query.
Using the .verify(value) method will send the BUS:B<x>:NRZ:THReshold? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:NRZ:THReshold value command.

SCPI Syntax

- BUS:B<x>:NRZ:THReshold <NR3>
- BUS:B<x>:NRZ:THReshold?

Info

B<x> is the number of the bus.
<NR3> is the NRZ Strobe threshold for the specified bus in volts. The valid range is -8 V to +8 V.

BusBItemNrzBitorder ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:NRZ:BITOrder command.

Description

This command sets or queries the NRZ bit order for the specified bus. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:NRZ:BITOrder? query.
Using the .verify(value) method will send the BUS:B<x>:NRZ:BITOrder? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:NRZ:BITOrder value command.

SCPI Syntax

- BUS:B<x>:NRZ:BITOrder {LSB|MSB}
- BUS:B<x>:NRZ:BITOrder?

Info

B<x> is the number of the bus.
LSB specifies that each bit becomes the recovered value’s new LSB, after shifting previously recovered bits one place to the left. The decoding happens right to left.
MSB specifies that each successive bit from the bus’s data line becomes the new MSB of the recovered value, shifting any previously recovered bits one place to the right. The decoding happens left to right.

BusBItemNrzBitrate ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:NRZ:BITRate command.

Description

This command sets or queries the NRZ bus bit rate. The bus number is specified by .

Usage

Using the .query() method will send the BUS:B<x>:NRZ:BITRate? query.
Using the .verify(value) method will send the BUS:B<x>:NRZ:BITRate? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:NRZ:BITRate value command.

SCPI Syntax

- BUS:B<x>:NRZ:BITRate <NR1>
- BUS:B<x>:NRZ:BITRate?

Info

B<x> is the number of the bus.
<NR1> specifies the bit rate for the NRZ bus. Arguments are the available bit rates up to 1 G.

BusBItemNrzPolarity ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:NRZ:POLarity command.

Description

This command sets or queries the NRZ source polarity for the specified bus. The bus number is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:NRZ:POLarity? query.
Using the .verify(value) method will send the BUS:B<x>:NRZ:POLarity? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:NRZ:POLarity value command.

SCPI Syntax

- BUS:B<x>:NRZ:POLarity {INVerted|NORmal}
- BUS:B<x>:NRZ:POLarity?

Info

B<x> is the number of the bus.
INVerted specifies inverted polarity.
NORmal specifies normal polarity.

BusBItemNrzSource ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:NRZ:SOUrce command.

Description

This command sets or queries the NRZ source for the specified bus. This command specifies the source channel. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:NRZ:SOUrce? query.
Using the .verify(value) method will send the BUS:B<x>:NRZ:SOUrce? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:NRZ:SOUrce value command.

SCPI Syntax

- BUS:B<x>:NRZ:SOUrce {S<x>_Ch<x>|CH<x>|MATH<x>|REF<x>]
- BUS:B<x>:NRZ:SOUrce?

Info

B<x> is the number of the bus.
S<x>_Ch<x> specifies the remote scope number and the analog channel as the source.
CH<x> specifies an analog channel as the source.
MATH<x> specifies a math waveform as the source.
REF<x> specifies a digital reference waveform as the source.

BusBItemNrzSpmi ¶

Bases: SCPICmdRead

The BUS:B<x>:NRZ:SPMI command tree.

Usage

Using the .query() method will send the BUS:B<x>:NRZ:SPMI? query.
Using the .verify(value) method will send the BUS:B<x>:NRZ:SPMI? query and raise an AssertionError if the returned value does not match value.

Info

B<x> is the number of the bus.

Properties

.version: The BUS:B<x>:NRZ:SPMI:VERsion command.

version `property` ¶

version: BusBItemNrzSpmiVersion

Return the BUS:B<x>:NRZ:SPMI:VERsion command.

Description

This command sets or queries the Version for the specified bus. The bus number is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:NRZ:SPMI:VERsion? query.
Using the .verify(value) method will send the BUS:B<x>:NRZ:SPMI:VERsion? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:NRZ:SPMI:VERsion value command.

SCPI Syntax

- BUS:B<x>:NRZ:SPMI:VERsion {v<x>}
- BUS:B<x>:NRZ:SPMI:VERsion?

Info

B<x> is the number of the bus.
v1 specifies version 1.
v2 specifies version 2.

BusBItemNrzSpmiVersion ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:NRZ:SPMI:VERsion command.

Description

This command sets or queries the Version for the specified bus. The bus number is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:NRZ:SPMI:VERsion? query.
Using the .verify(value) method will send the BUS:B<x>:NRZ:SPMI:VERsion? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:NRZ:SPMI:VERsion value command.

SCPI Syntax

- BUS:B<x>:NRZ:SPMI:VERsion {v<x>}
- BUS:B<x>:NRZ:SPMI:VERsion?

Info

B<x> is the number of the bus.
v1 specifies version 1.
v2 specifies version 2.

BusBItemNrzThreshold ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:NRZ:THReshold command.

Description

This command sets or queries the NRZ threshold for the specified bus. The bus number is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:NRZ:THReshold? query.
Using the .verify(value) method will send the BUS:B<x>:NRZ:THReshold? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:NRZ:THReshold value command.

SCPI Syntax

- BUS:B<x>:NRZ:THReshold <NR3>
- BUS:B<x>:NRZ:THReshold?

Info

B<x> is the number of the bus.
<NR3> is the NRZ Strobe threshold for the specified bus in volts. The valid range is -8 V to +8 V.

BusBItemOnewire ¶

Bases: SCPICmdRead

The BUS:B<x>:ONEWIRe command tree.

Usage

Using the .query() method will send the BUS:B<x>:ONEWIRe? query.
Using the .verify(value) method will send the BUS:B<x>:ONEWIRe? query and raise an AssertionError if the returned value does not match value.

Info

B<x> is the number of the bus.

Properties

.data: The BUS:B<x>:ONEWIRe:DATA command tree.
.mode: The BUS:B<x>:ONEWIRe:MODe command.

data `property` ¶

data: BusBItemOnewireData

Return the BUS:B<x>:ONEWIRe:DATA command tree.

Usage

Using the .query() method will send the BUS:B<x>:ONEWIRe:DATA? query.
Using the .verify(value) method will send the BUS:B<x>:ONEWIRe:DATA? query and raise an AssertionError if the returned value does not match value.

Info

B<x> is the number of the bus.

Sub-properties

.source: The BUS:B<x>:ONEWIRe:DATA:SOUrce command.
.threshold: The BUS:B<x>:ONEWIRe:DATA:THReshold command.

mode `property` ¶

mode: BusBItemOnewireMode

Return the BUS:B<x>:ONEWIRe:MODe command.

Description

This command sets or queries the mode for the specified ONEWIRe bus. The bus number is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:ONEWIRe:MODe? query.
Using the .verify(value) method will send the BUS:B<x>:ONEWIRe:MODe? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:ONEWIRe:MODe value command.

SCPI Syntax

- BUS:B<x>:ONEWIRe:MODe {STAndard|OVErdrive}
- BUS:B<x>:ONEWIRe:MODe?

Info

B<x> is the number of the bus.
STAndard specifies the mode as standard. Standard is the default mode whose value is 15.4 kbs.
OVErdrive specifies the mode as overdrive.

BusBItemOnewireData ¶

Bases: SCPICmdRead

The BUS:B<x>:ONEWIRe:DATA command tree.

Usage

Using the .query() method will send the BUS:B<x>:ONEWIRe:DATA? query.
Using the .verify(value) method will send the BUS:B<x>:ONEWIRe:DATA? query and raise an AssertionError if the returned value does not match value.

Info

B<x> is the number of the bus.

Properties

.source: The BUS:B<x>:ONEWIRe:DATA:SOUrce command.
.threshold: The BUS:B<x>:ONEWIRe:DATA:THReshold command.

source `property` ¶

source: BusBItemOnewireDataSource

Return the BUS:B<x>:ONEWIRe:DATA:SOUrce command.

Description

This command sets or queries the ONEWIRe source for the specified bus. This command specifies the source channel. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:ONEWIRe:DATA:SOUrce? query.
Using the .verify(value) method will send the BUS:B<x>:ONEWIRe:DATA:SOUrce? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:ONEWIRe:DATA:SOUrce value command.

SCPI Syntax

- BUS:B<x>:ONEWIRe:DATA:SOUrce {S<x>_Ch<x>|CH<x>|MATH<x>|REF<x>]
- BUS:B<x>:ONEWIRe:DATA:SOUrce?

Info

B<x> is the number of the bus.
S<x>_Ch<x> specifies the remote scope number and the analog channel as the source.
CH<x> specifies an analog channel as the source.
MATH<x> specifies a math waveform as the source.
REF<x> specifies a digital reference waveform as the source.

threshold `property` ¶

threshold: BusBItemOnewireDataThreshold

Return the BUS:B<x>:ONEWIRe:DATA:THReshold command.

Description

This command sets or queries the ONEWIRe data source threshold for the specified bus. The bus number is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:ONEWIRe:DATA:THReshold? query.
Using the .verify(value) method will send the BUS:B<x>:ONEWIRe:DATA:THReshold? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:ONEWIRe:DATA:THReshold value command.

SCPI Syntax

- BUS:B<x>:ONEWIRe:DATA:THReshold <NR3>
- BUS:B<x>:ONEWIRe:DATA:THReshold?

Info

B<x> is the number of the bus.
<NR3> is the ONEWIRe Strobe threshold for the specified bus in volts. The valid range is -8 V to +8 V. The default value is 1.25 V.

BusBItemOnewireDataSource ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:ONEWIRe:DATA:SOUrce command.

Description

This command sets or queries the ONEWIRe source for the specified bus. This command specifies the source channel. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:ONEWIRe:DATA:SOUrce? query.
Using the .verify(value) method will send the BUS:B<x>:ONEWIRe:DATA:SOUrce? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:ONEWIRe:DATA:SOUrce value command.

SCPI Syntax

- BUS:B<x>:ONEWIRe:DATA:SOUrce {S<x>_Ch<x>|CH<x>|MATH<x>|REF<x>]
- BUS:B<x>:ONEWIRe:DATA:SOUrce?

Info

B<x> is the number of the bus.
S<x>_Ch<x> specifies the remote scope number and the analog channel as the source.
CH<x> specifies an analog channel as the source.
MATH<x> specifies a math waveform as the source.
REF<x> specifies a digital reference waveform as the source.

BusBItemOnewireDataThreshold ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:ONEWIRe:DATA:THReshold command.

Description

This command sets or queries the ONEWIRe data source threshold for the specified bus. The bus number is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:ONEWIRe:DATA:THReshold? query.
Using the .verify(value) method will send the BUS:B<x>:ONEWIRe:DATA:THReshold? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:ONEWIRe:DATA:THReshold value command.

SCPI Syntax

- BUS:B<x>:ONEWIRe:DATA:THReshold <NR3>
- BUS:B<x>:ONEWIRe:DATA:THReshold?

Info

B<x> is the number of the bus.
<NR3> is the ONEWIRe Strobe threshold for the specified bus in volts. The valid range is -8 V to +8 V. The default value is 1.25 V.

BusBItemOnewireMode ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:ONEWIRe:MODe command.

Description

This command sets or queries the mode for the specified ONEWIRe bus. The bus number is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:ONEWIRe:MODe? query.
Using the .verify(value) method will send the BUS:B<x>:ONEWIRe:MODe? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:ONEWIRe:MODe value command.

SCPI Syntax

- BUS:B<x>:ONEWIRe:MODe {STAndard|OVErdrive}
- BUS:B<x>:ONEWIRe:MODe?

Info

B<x> is the number of the bus.
STAndard specifies the mode as standard. Standard is the default mode whose value is 15.4 kbs.
OVErdrive specifies the mode as overdrive.

BusBItemParallel ¶

Bases: SCPICmdRead

The BUS:B<x>:PARallel command tree.

Usage

Using the .query() method will send the BUS:B<x>:PARallel? query.
Using the .verify(value) method will send the BUS:B<x>:PARallel? query and raise an AssertionError if the returned value does not match value.

Info

B<x> is the number of the bus.

Properties

.allthresholds: The BUS:B<x>:PARallel:ALLTHResholds command.
.bitsource: The BUS:B<x>:PARallel:BIT<n>SOUrce command.
.clock: The BUS:B<x>:PARallel:CLOCk command tree.
.clocksource: The BUS:B<x>:PARallel:CLOCkSOUrce command.

allthresholds `property` ¶

allthresholds: BusBItemParallelAllthresholds

Return the BUS:B<x>:PARallel:ALLTHResholds command.

Description

This command sets or queries a threshold value for sources for the parallel bus. Use the BUS:BX:PARALLEL:ALLTHRESHOLDS:APPLY command to set the thresholds to this value. The bus is specified by x.

Usage

Using the .write(value) method will send the BUS:B<x>:PARallel:ALLTHResholds value command.

SCPI Syntax

- BUS:B<x>:PARallel:ALLTHResholds <NR3>

Info

B<x> is the number of the bus.
<NR3> is the source threshold.

Sub-properties

.apply: The BUS:B<x>:PARallel:ALLTHResholds:APPly command.

bitsource `property` ¶

bitsource: dict[int, BusBItemParallelBitsourceItem]

Return the BUS:B<x>:PARallel:BIT<n>SOUrce command.

Description

This command sets or queries the specified bit source for specified parallel bus. The bus is specified by x. The bit is specified by n and is an integer in the range of 1 to 64.

Usage

Using the .write(value) method will send the BUS:B<x>:PARallel:BIT<n>SOUrce value command.

SCPI Syntax

- BUS:B<x>:PARallel:BIT<n>SOUrce {S<x>_Ch<x>_D|CH<x>|CH<x>_D<x>|MATH<x>|REF<x>|REF<x>_D<x>|NONE}

Info

B<x> is the number of the bus.
S<x>_Ch<x>_D<x> specifies the remote scope number, the analog channel and the digital channel as the source.
CH<x> is the specified bit source.
CH<x>_D<x> is the specified bit source.
MATH<x> is the specified bit source.
REF<x> is the specified bit source.
REF<x>_D<x> specifies a digital reference waveform as the bit source waveform for the specified parallel bus.
NONE disables the bit source.

Sub-properties

.threshold: The BUS:B<x>:PARallel:BIT<n>SOUrce:THReshold command.

clock `property` ¶

clock: BusBItemParallelClock

Return the BUS:B<x>:PARallel:CLOCk command tree.

Usage

Using the .query() method will send the BUS:B<x>:PARallel:CLOCk? query.
Using the .verify(value) method will send the BUS:B<x>:PARallel:CLOCk? query and raise an AssertionError if the returned value does not match value.

Info

B<x> is the number of the bus.

Sub-properties

.edge: The BUS:B<x>:PARallel:CLOCk:EDGE command.
.isclocked: The BUS:B<x>:PARallel:CLOCk:ISCLOCKED command.

clocksource `property` ¶

clocksource: BusBItemParallelClocksource

Return the BUS:B<x>:PARallel:CLOCkSOUrce command.

Description

This command sets or queries the Parallel clock bit source for the specified bus. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:PARallel:CLOCkSOUrce? query.
Using the .verify(value) method will send the BUS:B<x>:PARallel:CLOCkSOUrce? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:PARallel:CLOCkSOUrce value command.

SCPI Syntax

- BUS:B<x>:PARallel:CLOCkSOUrce {S<x>_Ch<x>_D<x>|CH<x>|CH<x>_D<x>|MATH<x>|REF<x>|REF<x>_D<x>|NONE}
- BUS:B<x>:PARallel:CLOCkSOUrce?

Info

B<x> is the number of the bus.
S<x>_Ch<x>_D<x> specifies the remote scope number, the analog channel and the digital channel as the source.
CH<x> specifies an analog FlexChannel to use as the bus clock source.
CH<x>_D<x> specifies a digital channel on a specified FlexChannel to use as the bus clock source.
MATH<x> specifies the math channel to use as the bus clock source.
REF<x> specifies the reference channel to use as the bus clock source.
REF<x>_D<x> specifies a digital reference waveform as the clock source waveform for the specified parallel bus.
NONE specifies the reference channel to use as the bus clock source.

Sub-properties

.threshold: The BUS:B<x>:PARallel:CLOCkSOUrce:THReshold command.

BusBItemParallelAllthresholds ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:PARallel:ALLTHResholds command.

Description

This command sets or queries a threshold value for sources for the parallel bus. Use the BUS:BX:PARALLEL:ALLTHRESHOLDS:APPLY command to set the thresholds to this value. The bus is specified by x.

Usage

Using the .write(value) method will send the BUS:B<x>:PARallel:ALLTHResholds value command.

SCPI Syntax

- BUS:B<x>:PARallel:ALLTHResholds <NR3>

Info

B<x> is the number of the bus.
<NR3> is the source threshold.

Properties

.apply: The BUS:B<x>:PARallel:ALLTHResholds:APPly command.

apply `property` ¶

apply: BusBItemParallelAllthresholdsApply

Return the BUS:B<x>:PARallel:ALLTHResholds:APPly command.

Description

This command sets all of the data source thresholds to the value set by BUS:BX:PARALLEL:ALLTHRESHOLDS for the parallel bus. The bus is specified by x.

Usage

Using the .write() method will send the BUS:B<x>:PARallel:ALLTHResholds:APPly command.

SCPI Syntax

- BUS:B<x>:PARallel:ALLTHResholds:APPly

Info

B<x> is the Bus number.

BusBItemParallelAllthresholdsApply ¶

Bases: SCPICmdWriteNoArguments

The BUS:B<x>:PARallel:ALLTHResholds:APPly command.

Description

This command sets all of the data source thresholds to the value set by BUS:BX:PARALLEL:ALLTHRESHOLDS for the parallel bus. The bus is specified by x.

Usage

Using the .write() method will send the BUS:B<x>:PARallel:ALLTHResholds:APPly command.

SCPI Syntax

- BUS:B<x>:PARallel:ALLTHResholds:APPly

Info

B<x> is the Bus number.

BusBItemParallelBitsourceItem ¶

Bases: ValidatedDynamicNumberCmd, SCPICmdWrite, SCPICmdRead

The BUS:B<x>:PARallel:BIT<n>SOUrce command.

Description

This command sets or queries the specified bit source for specified parallel bus. The bus is specified by x. The bit is specified by n and is an integer in the range of 1 to 64.

Usage

Using the .write(value) method will send the BUS:B<x>:PARallel:BIT<n>SOUrce value command.

SCPI Syntax

- BUS:B<x>:PARallel:BIT<n>SOUrce {S<x>_Ch<x>_D|CH<x>|CH<x>_D<x>|MATH<x>|REF<x>|REF<x>_D<x>|NONE}

Info

B<x> is the number of the bus.
S<x>_Ch<x>_D<x> specifies the remote scope number, the analog channel and the digital channel as the source.
CH<x> is the specified bit source.
CH<x>_D<x> is the specified bit source.
MATH<x> is the specified bit source.
REF<x> is the specified bit source.
REF<x>_D<x> specifies a digital reference waveform as the bit source waveform for the specified parallel bus.
NONE disables the bit source.

Properties

.threshold: The BUS:B<x>:PARallel:BIT<n>SOUrce:THReshold command.

threshold `property` ¶

threshold: BusBItemParallelBitsourceItemThreshold

Return the BUS:B<x>:PARallel:BIT<n>SOUrce:THReshold command.

Description

This command sets or queries the specified bit source threshold for the specified parallel bus. The bus is specified by x. The bit is specified by n and is an integer in the range of 1 to 64.

Usage

Using the .write(value) method will send the BUS:B<x>:PARallel:BIT<n>SOUrce:THReshold value command.

SCPI Syntax

- BUS:B<x>:PARallel:BIT<n>SOUrce:THReshold <NR3>

Info

B<x> is the number of the bus.
<NR3> is the specified bit source threshold for the specified parallel bus.

BusBItemParallelBitsourceItemThreshold ¶

Bases: SCPICmdWrite

The BUS:B<x>:PARallel:BIT<n>SOUrce:THReshold command.

Description

This command sets or queries the specified bit source threshold for the specified parallel bus. The bus is specified by x. The bit is specified by n and is an integer in the range of 1 to 64.

Usage

Using the .write(value) method will send the BUS:B<x>:PARallel:BIT<n>SOUrce:THReshold value command.

SCPI Syntax

- BUS:B<x>:PARallel:BIT<n>SOUrce:THReshold <NR3>

Info

B<x> is the number of the bus.
<NR3> is the specified bit source threshold for the specified parallel bus.

BusBItemParallelClock ¶

Bases: SCPICmdRead

The BUS:B<x>:PARallel:CLOCk command tree.

Usage

Using the .query() method will send the BUS:B<x>:PARallel:CLOCk? query.
Using the .verify(value) method will send the BUS:B<x>:PARallel:CLOCk? query and raise an AssertionError if the returned value does not match value.

Info

B<x> is the number of the bus.

Properties

.edge: The BUS:B<x>:PARallel:CLOCk:EDGE command.
.isclocked: The BUS:B<x>:PARallel:CLOCk:ISCLOCKED command.

edge `property` ¶

edge: BusBItemParallelClockEdge

Return the BUS:B<x>:PARallel:CLOCk:EDGE command.

Description

This command sets or queries the clock edge for the parallel bus. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:PARallel:CLOCk:EDGE? query.
Using the .verify(value) method will send the BUS:B<x>:PARallel:CLOCk:EDGE? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:PARallel:CLOCk:EDGE value command.

SCPI Syntax

- BUS:B<x>:PARallel:CLOCk:EDGE {FALLING|RISING|EITHER}
- BUS:B<x>:PARallel:CLOCk:EDGE?

Info

B<x> is the number of the bus.
FALLING decodes on the falling edge of the clocked parallel bus signal.
RISING decodes on the rising edge of the clocked parallel bus signal.
EITHER decodes on the rising or falling edge of the clocked parallel bus signal.

isclocked `property` ¶

isclocked: BusBItemParallelClockIsclocked

Return the BUS:B<x>:PARallel:CLOCk:ISCLOCKED command.

Description

This command determines whether the bus operates in a clocked or asynchronous fashion. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:PARallel:CLOCk:ISCLOCKED? query.
Using the .verify(value) method will send the BUS:B<x>:PARallel:CLOCk:ISCLOCKED? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:PARallel:CLOCk:ISCLOCKED value command.

SCPI Syntax

- BUS:B<x>:PARallel:CLOCk:ISCLOCKED {OFF|ON|NR1>
- BUS:B<x>:PARallel:CLOCk:ISCLOCKED?

Info

B<x> is the number of the bus.
OFF argument specifies an asynchronous bus.
ON argument specifies a clocked bus.
<NR1> = 0 specifies an asynchronous bus; any other value specifies a clocked bus.

BusBItemParallelClockEdge ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:PARallel:CLOCk:EDGE command.

Description

This command sets or queries the clock edge for the parallel bus. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:PARallel:CLOCk:EDGE? query.
Using the .verify(value) method will send the BUS:B<x>:PARallel:CLOCk:EDGE? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:PARallel:CLOCk:EDGE value command.

SCPI Syntax

- BUS:B<x>:PARallel:CLOCk:EDGE {FALLING|RISING|EITHER}
- BUS:B<x>:PARallel:CLOCk:EDGE?

Info

B<x> is the number of the bus.
FALLING decodes on the falling edge of the clocked parallel bus signal.
RISING decodes on the rising edge of the clocked parallel bus signal.
EITHER decodes on the rising or falling edge of the clocked parallel bus signal.

BusBItemParallelClockIsclocked ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:PARallel:CLOCk:ISCLOCKED command.

Description

This command determines whether the bus operates in a clocked or asynchronous fashion. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:PARallel:CLOCk:ISCLOCKED? query.
Using the .verify(value) method will send the BUS:B<x>:PARallel:CLOCk:ISCLOCKED? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:PARallel:CLOCk:ISCLOCKED value command.

SCPI Syntax

- BUS:B<x>:PARallel:CLOCk:ISCLOCKED {OFF|ON|NR1>
- BUS:B<x>:PARallel:CLOCk:ISCLOCKED?

Info

B<x> is the number of the bus.
OFF argument specifies an asynchronous bus.
ON argument specifies a clocked bus.
<NR1> = 0 specifies an asynchronous bus; any other value specifies a clocked bus.

BusBItemParallelClocksource ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:PARallel:CLOCkSOUrce command.

Description

This command sets or queries the Parallel clock bit source for the specified bus. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:PARallel:CLOCkSOUrce? query.
Using the .verify(value) method will send the BUS:B<x>:PARallel:CLOCkSOUrce? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:PARallel:CLOCkSOUrce value command.

SCPI Syntax

- BUS:B<x>:PARallel:CLOCkSOUrce {S<x>_Ch<x>_D<x>|CH<x>|CH<x>_D<x>|MATH<x>|REF<x>|REF<x>_D<x>|NONE}
- BUS:B<x>:PARallel:CLOCkSOUrce?

Info

B<x> is the number of the bus.
S<x>_Ch<x>_D<x> specifies the remote scope number, the analog channel and the digital channel as the source.
CH<x> specifies an analog FlexChannel to use as the bus clock source.
CH<x>_D<x> specifies a digital channel on a specified FlexChannel to use as the bus clock source.
MATH<x> specifies the math channel to use as the bus clock source.
REF<x> specifies the reference channel to use as the bus clock source.
REF<x>_D<x> specifies a digital reference waveform as the clock source waveform for the specified parallel bus.
NONE specifies the reference channel to use as the bus clock source.

Properties

.threshold: The BUS:B<x>:PARallel:CLOCkSOUrce:THReshold command.

threshold `property` ¶

threshold: BusBItemParallelClocksourceThreshold

Return the BUS:B<x>:PARallel:CLOCkSOUrce:THReshold command.

Description

This command sets or queries the clock source threshold for the parallel bus. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:PARallel:CLOCkSOUrce:THReshold? query.
Using the .verify(value) method will send the BUS:B<x>:PARallel:CLOCkSOUrce:THReshold? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:PARallel:CLOCkSOUrce:THReshold value command.

SCPI Syntax

- BUS:B<x>:PARallel:CLOCkSOUrce:THReshold <NR3>
- BUS:B<x>:PARallel:CLOCkSOUrce:THReshold?

Info

<NR3> is the clock bit source threshold for the parallel bus.

BusBItemParallelClocksourceThreshold ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:PARallel:CLOCkSOUrce:THReshold command.

Description

This command sets or queries the clock source threshold for the parallel bus. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:PARallel:CLOCkSOUrce:THReshold? query.
Using the .verify(value) method will send the BUS:B<x>:PARallel:CLOCkSOUrce:THReshold? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:PARallel:CLOCkSOUrce:THReshold value command.

SCPI Syntax

- BUS:B<x>:PARallel:CLOCkSOUrce:THReshold <NR3>
- BUS:B<x>:PARallel:CLOCkSOUrce:THReshold?

Info

<NR3> is the clock bit source threshold for the parallel bus.

BusBItemPsifive ¶

Bases: SCPICmdRead

The BUS:B<x>:PSIFIVe command tree.

Usage

Using the .query() method will send the BUS:B<x>:PSIFIVe? query.
Using the .verify(value) method will send the BUS:B<x>:PSIFIVe? query and raise an AssertionError if the returned value does not match value.

Info

B<x> is the number of the bus.

Properties

.bitperiod: The BUS:B<x>:PSIFIVe:BITPERiod command.
.bitrate: The BUS:B<x>:PSIFIVe:BITRate command.
.comm: The BUS:B<x>:PSIFIVe:COMM command tree.
.dataa: The BUS:B<x>:PSIFIVe:DATAA command.
.datab: The BUS:B<x>:PSIFIVe:DATAB command.
.dataformat: The BUS:B<x>:PSIFIVe:DATAFORMat command.
.ecusource: The BUS:B<x>:PSIFIVe:ECUSOURce command.
.framecontrol: The BUS:B<x>:PSIFIVe:FRAMECONTrol command.
.messaging: The BUS:B<x>:PSIFIVe:MESSaging command.
.source: The BUS:B<x>:PSIFIVe:SOUrce command.
.status: The BUS:B<x>:PSIFIVe:STATus command.
.syncmode: The BUS:B<x>:PSIFIVe:SYNCMODe command.
.syncthreshold: The BUS:B<x>:PSIFIVe:SYNCTHRESHold command.
.threshold: The BUS:B<x>:PSIFIVe:THRESHold command.

bitperiod `property` ¶

bitperiod: BusBItemPsifiveBitperiod

Return the BUS:B<x>:PSIFIVe:BITPERiod command.

Description

This command sets or queries the PSI5 Bit period bus parameter.

Usage

Using the .query() method will send the BUS:B<x>:PSIFIVe:BITPERiod? query.
Using the .verify(value) method will send the BUS:B<x>:PSIFIVe:BITPERiod? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:PSIFIVe:BITPERiod value command.

SCPI Syntax

- BUS:B<x>:PSIFIVe:BITPERiod <NR1>
- BUS:B<x>:PSIFIVe:BITPERiod?

Info

B<x> is the number of the bus.
<NR1> specifies the bit period. The default bit period is 60 Micro seconds.

bitrate `property` ¶

bitrate: BusBItemPsifiveBitrate

Return the BUS:B<x>:PSIFIVe:BITRate command.

Description

This command sets or queries the PSI5 bitrate.

Usage

Using the .query() method will send the BUS:B<x>:PSIFIVe:BITRate? query.
Using the .verify(value) method will send the BUS:B<x>:PSIFIVe:BITRate? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:PSIFIVe:BITRate value command.

SCPI Syntax

- BUS:B<x>:PSIFIVe:BITRate {RATE125K|RATE189K|RATE83K}
- BUS:B<x>:PSIFIVe:BITRate?

Info

B<x> is the number of the bus.

comm `property` ¶

comm: BusBItemPsifiveComm

Return the BUS:B<x>:PSIFIVe:COMM command tree.

Usage

Using the .query() method will send the BUS:B<x>:PSIFIVe:COMM? query.
Using the .verify(value) method will send the BUS:B<x>:PSIFIVe:COMM? query and raise an AssertionError if the returned value does not match value.

Info

B<x> is the number of the bus.

Sub-properties

.direction: The BUS:B<x>:PSIFIVe:COMM:DIRection command.

dataa `property` ¶

dataa: BusBItemPsifiveDataa

Return the BUS:B<x>:PSIFIVe:DATAA command.

Description

This command sets or queries the PSI5 frame mandatory data region A.

Usage

Using the .query() method will send the BUS:B<x>:PSIFIVe:DATAA? query.
Using the .verify(value) method will send the BUS:B<x>:PSIFIVe:DATAA? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:PSIFIVe:DATAA value command.

SCPI Syntax

- BUS:B<x>:PSIFIVe:DATAA <NR1>
- BUS:B<x>:PSIFIVe:DATAA?

Info

B<x> is the number of the bus.
<NR1> specifies the dataA value in bits. The default dataA value is 10 bits, otherwise it ranges between 10 to 24 bits.

datab `property` ¶

datab: BusBItemPsifiveDatab

Return the BUS:B<x>:PSIFIVe:DATAB command.

Description

This command sets or queries the PSI5 frame optional bits of data region B.

Usage

Using the .query() method will send the BUS:B<x>:PSIFIVe:DATAB? query.
Using the .verify(value) method will send the BUS:B<x>:PSIFIVe:DATAB? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:PSIFIVe:DATAB value command.

SCPI Syntax

- BUS:B<x>:PSIFIVe:DATAB <NR1>
- BUS:B<x>:PSIFIVe:DATAB?

Info

B<x> is the number of the bus.
<NR1> specifies the dataA value in bits. The default dataB value is 0 bits, otherwise it ranges between 0 to 12 bits.

dataformat `property` ¶

dataformat: BusBItemPsifiveDataformat

Return the BUS:B<x>:PSIFIVe:DATAFORMat command.

Description

This command sets or queries the data format in PSI5 Frame2 packet.

Usage

Using the .query() method will send the BUS:B<x>:PSIFIVe:DATAFORMat? query.
Using the .verify(value) method will send the BUS:B<x>:PSIFIVe:DATAFORMat? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:PSIFIVe:DATAFORMat value command.

SCPI Syntax

- BUS:B<x>:PSIFIVe:DATAFORMat {NIBBLe|BYTe}
- BUS:B<x>:PSIFIVe:DATAFORMat?

Info

B<x> is the number of the bus.
NIBBLe specifies the data format as Nibble.
BYTe specifies the data format as Byte.

ecusource `property` ¶

ecusource: BusBItemPsifiveEcusource

Return the BUS:B<x>:PSIFIVe:ECUSOURce command.

Description

This command sets or queries the ECU to sensor source channel for the specified Bus.

Usage

Using the .query() method will send the BUS:B<x>:PSIFIVe:ECUSOURce? query.
Using the .verify(value) method will send the BUS:B<x>:PSIFIVe:ECUSOURce? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:PSIFIVe:ECUSOURce value command.

SCPI Syntax

- BUS:B<x>:PSIFIVe:ECUSOURce {S<x>_Ch<x>|CH<x>|MATH<x>|REF<x>}
- BUS:B<x>:PSIFIVe:ECUSOURce?

Info

B<x> is the number of the bus.
S<x>_Ch<x> specifies the remote scope number and the analog channel.
CH<x> specifies an analog channel as the source.
MATH<x> specifies a math waveform as the source.
REF<x> specifies a digital reference waveform as the source.

framecontrol `property` ¶

framecontrol: BusBItemPsifiveFramecontrol

Return the BUS:B<x>:PSIFIVe:FRAMECONTrol command.

Description

This command sets or queries the PSI5 frame optional control bits.

Usage

Using the .query() method will send the BUS:B<x>:PSIFIVe:FRAMECONTrol? query.
Using the .verify(value) method will send the BUS:B<x>:PSIFIVe:FRAMECONTrol? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:PSIFIVe:FRAMECONTrol value command.

SCPI Syntax

- BUS:B<x>:PSIFIVe:FRAMECONTrol <NR1>
- BUS:B<x>:PSIFIVe:FRAMECONTrol?

Info

B<x> is the number of the bus.
<NR1> specifies the frame control value in bits. The default frame control value is 0 bits, otherwise it ranges between 0 to 4 bits.

messaging `property` ¶

messaging: BusBItemPsifiveMessaging

Return the BUS:B<x>:PSIFIVe:MESSaging command.

Description

This command sets or queries the PSI5 optional messaging bits.

Usage

Using the .query() method will send the BUS:B<x>:PSIFIVe:MESSaging? query.
Using the .verify(value) method will send the BUS:B<x>:PSIFIVe:MESSaging? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:PSIFIVe:MESSaging value command.

SCPI Syntax

- BUS:B<x>:PSIFIVe:MESSaging {OFF|ON}
- BUS:B<x>:PSIFIVe:MESSaging?

Info

B<x> is the number of the bus.
OFF specifies the messaging bits as the default value of 0.
ON specifies the messaging bits as 2.

source `property` ¶

source: BusBItemPsifiveSource

Return the BUS:B<x>:PSIFIVe:SOUrce command.

Description

This command sets or queries serial channel on or off.

Usage

Using the .query() method will send the BUS:B<x>:PSIFIVe:SOUrce? query.
Using the .verify(value) method will send the BUS:B<x>:PSIFIVe:SOUrce? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:PSIFIVe:SOUrce value command.

SCPI Syntax

- BUS:B<x>:PSIFIVe:SOUrce {S<x>_Ch<x>|CH<x>|MATH<x>|REF<x>}
- BUS:B<x>:PSIFIVe:SOUrce?

Info

B<x> is the number of the bus.
S<x>_Ch<x> specifies the remote scope number and the analog channel.
CH<x> specifies an analog channel as the source.
MATH<x> specifies a math waveform as the source.
REF<x> specifies a digital reference waveform as the source.

status `property` ¶

status: BusBItemPsifiveStatus

Return the BUS:B<x>:PSIFIVe:STATus command.

Description

This command sets or queries the optional status bits of PSI5.

Usage

Using the .query() method will send the BUS:B<x>:PSIFIVe:STATus? query.
Using the .verify(value) method will send the BUS:B<x>:PSIFIVe:STATus? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:PSIFIVe:STATus value command.

SCPI Syntax

- BUS:B<x>:PSIFIVe:STATus <NR1>
- BUS:B<x>:PSIFIVe:STATus?

Info

B<x> is the number of the bus.
<NR1> specifies the status value in bits. The default status value is 0 bits, otherwise it ranges between 0 to 2 bits.

syncmode `property` ¶

syncmode: BusBItemPsifiveSyncmode

Return the BUS:B<x>:PSIFIVe:SYNCMODe command.

Description

This command sets or queries the PSI5 Sync Mode.

Usage

Using the .query() method will send the BUS:B<x>:PSIFIVe:SYNCMODe? query.
Using the .verify(value) method will send the BUS:B<x>:PSIFIVe:SYNCMODe? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:PSIFIVe:SYNCMODe value command.

SCPI Syntax

- BUS:B<x>:PSIFIVe:SYNCMODe {PULSEWIDTh|TOOTHGAP}
- BUS:B<x>:PSIFIVe:SYNCMODe?

Info

B<x> is the number of the bus.
PULSEWIDTh specifies the Sync Mode as Pulse Width.
TOOTHGAP specifies the Sync Mode as Tooth Gap.

syncthreshold `property` ¶

syncthreshold: BusBItemPsifiveSyncthreshold

Return the BUS:B<x>:PSIFIVe:SYNCTHRESHold command.

Description

This command sets or queries the PSI5 threshold for the ECU To Sensor specified bus.

Usage

Using the .query() method will send the BUS:B<x>:PSIFIVe:SYNCTHRESHold? query.
Using the .verify(value) method will send the BUS:B<x>:PSIFIVe:SYNCTHRESHold? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:PSIFIVe:SYNCTHRESHold value command.

SCPI Syntax

- BUS:B<x>:PSIFIVe:SYNCTHRESHold <NR3>
- BUS:B<x>:PSIFIVe:SYNCTHRESHold?

Info

B<x> is the number of the bus.
<NR3> specifies the PSI5 Strobe threshold for the specified bus. The threshold range is -8 V to +8 V.

threshold `property` ¶

threshold: BusBItemPsifiveThreshold

Return the BUS:B<x>:PSIFIVe:THRESHold command.

Description

This command sets or queries the PSI5 threshold for the Sensor To ECU specified bus.

Usage

Using the .query() method will send the BUS:B<x>:PSIFIVe:THRESHold? query.
Using the .verify(value) method will send the BUS:B<x>:PSIFIVe:THRESHold? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:PSIFIVe:THRESHold value command.

SCPI Syntax

- BUS:B<x>:PSIFIVe:THRESHold <NR3>
- BUS:B<x>:PSIFIVe:THRESHold?

Info

B<x> is the number of the bus.
<NR3> specifies the PSI5 Strobe threshold for the specified bus. The threshold range is -8 V to +8 V.

BusBItemPsifiveBitperiod ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:PSIFIVe:BITPERiod command.

Description

This command sets or queries the PSI5 Bit period bus parameter.

Usage

Using the .query() method will send the BUS:B<x>:PSIFIVe:BITPERiod? query.
Using the .verify(value) method will send the BUS:B<x>:PSIFIVe:BITPERiod? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:PSIFIVe:BITPERiod value command.

SCPI Syntax

- BUS:B<x>:PSIFIVe:BITPERiod <NR1>
- BUS:B<x>:PSIFIVe:BITPERiod?

Info

B<x> is the number of the bus.
<NR1> specifies the bit period. The default bit period is 60 Micro seconds.

BusBItemPsifiveBitrate ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:PSIFIVe:BITRate command.

Description

This command sets or queries the PSI5 bitrate.

Usage

Using the .query() method will send the BUS:B<x>:PSIFIVe:BITRate? query.
Using the .verify(value) method will send the BUS:B<x>:PSIFIVe:BITRate? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:PSIFIVe:BITRate value command.

SCPI Syntax

- BUS:B<x>:PSIFIVe:BITRate {RATE125K|RATE189K|RATE83K}
- BUS:B<x>:PSIFIVe:BITRate?

Info

B<x> is the number of the bus.

BusBItemPsifiveComm ¶

Bases: SCPICmdRead

The BUS:B<x>:PSIFIVe:COMM command tree.

Usage

Using the .query() method will send the BUS:B<x>:PSIFIVe:COMM? query.
Using the .verify(value) method will send the BUS:B<x>:PSIFIVe:COMM? query and raise an AssertionError if the returned value does not match value.

Info

B<x> is the number of the bus.

Properties

.direction: The BUS:B<x>:PSIFIVe:COMM:DIRection command.

direction `property` ¶

direction: BusBItemPsifiveCommDirection

Return the BUS:B<x>:PSIFIVe:COMM:DIRection command.

Description

This command sets or queries the PSI5 bus communication direction. Communication direction by default is set to Sensor to ECU.

Usage

Using the .query() method will send the BUS:B<x>:PSIFIVe:COMM:DIRection? query.
Using the .verify(value) method will send the BUS:B<x>:PSIFIVe:COMM:DIRection? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:PSIFIVe:COMM:DIRection value command.

SCPI Syntax

- BUS:B<x>:PSIFIVe:COMM:DIRection {SENSORECU|ECUSENSor}
- BUS:B<x>:PSIFIVe:COMM:DIRection?

Info

B<x> is the number of the bus.
SENSORECU specifies the communication direction to Sensor to ECU. This is the default value.
ECUSENSor specifies the communication direction to ECU to Sensor.

BusBItemPsifiveCommDirection ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:PSIFIVe:COMM:DIRection command.

Description

This command sets or queries the PSI5 bus communication direction. Communication direction by default is set to Sensor to ECU.

Usage

Using the .query() method will send the BUS:B<x>:PSIFIVe:COMM:DIRection? query.
Using the .verify(value) method will send the BUS:B<x>:PSIFIVe:COMM:DIRection? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:PSIFIVe:COMM:DIRection value command.

SCPI Syntax

- BUS:B<x>:PSIFIVe:COMM:DIRection {SENSORECU|ECUSENSor}
- BUS:B<x>:PSIFIVe:COMM:DIRection?

Info

B<x> is the number of the bus.
SENSORECU specifies the communication direction to Sensor to ECU. This is the default value.
ECUSENSor specifies the communication direction to ECU to Sensor.

BusBItemPsifiveDataa ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:PSIFIVe:DATAA command.

Description

This command sets or queries the PSI5 frame mandatory data region A.

Usage

Using the .query() method will send the BUS:B<x>:PSIFIVe:DATAA? query.
Using the .verify(value) method will send the BUS:B<x>:PSIFIVe:DATAA? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:PSIFIVe:DATAA value command.

SCPI Syntax

- BUS:B<x>:PSIFIVe:DATAA <NR1>
- BUS:B<x>:PSIFIVe:DATAA?

Info

B<x> is the number of the bus.
<NR1> specifies the dataA value in bits. The default dataA value is 10 bits, otherwise it ranges between 10 to 24 bits.

BusBItemPsifiveDatab ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:PSIFIVe:DATAB command.

Description

This command sets or queries the PSI5 frame optional bits of data region B.

Usage

Using the .query() method will send the BUS:B<x>:PSIFIVe:DATAB? query.
Using the .verify(value) method will send the BUS:B<x>:PSIFIVe:DATAB? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:PSIFIVe:DATAB value command.

SCPI Syntax

- BUS:B<x>:PSIFIVe:DATAB <NR1>
- BUS:B<x>:PSIFIVe:DATAB?

Info

B<x> is the number of the bus.
<NR1> specifies the dataA value in bits. The default dataB value is 0 bits, otherwise it ranges between 0 to 12 bits.

BusBItemPsifiveDataformat ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:PSIFIVe:DATAFORMat command.

Description

This command sets or queries the data format in PSI5 Frame2 packet.

Usage

Using the .query() method will send the BUS:B<x>:PSIFIVe:DATAFORMat? query.
Using the .verify(value) method will send the BUS:B<x>:PSIFIVe:DATAFORMat? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:PSIFIVe:DATAFORMat value command.

SCPI Syntax

- BUS:B<x>:PSIFIVe:DATAFORMat {NIBBLe|BYTe}
- BUS:B<x>:PSIFIVe:DATAFORMat?

Info

B<x> is the number of the bus.
NIBBLe specifies the data format as Nibble.
BYTe specifies the data format as Byte.

BusBItemPsifiveEcusource ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:PSIFIVe:ECUSOURce command.

Description

This command sets or queries the ECU to sensor source channel for the specified Bus.

Usage

Using the .query() method will send the BUS:B<x>:PSIFIVe:ECUSOURce? query.
Using the .verify(value) method will send the BUS:B<x>:PSIFIVe:ECUSOURce? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:PSIFIVe:ECUSOURce value command.

SCPI Syntax

- BUS:B<x>:PSIFIVe:ECUSOURce {S<x>_Ch<x>|CH<x>|MATH<x>|REF<x>}
- BUS:B<x>:PSIFIVe:ECUSOURce?

Info

B<x> is the number of the bus.
S<x>_Ch<x> specifies the remote scope number and the analog channel.
CH<x> specifies an analog channel as the source.
MATH<x> specifies a math waveform as the source.
REF<x> specifies a digital reference waveform as the source.

BusBItemPsifiveFramecontrol ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:PSIFIVe:FRAMECONTrol command.

Description

This command sets or queries the PSI5 frame optional control bits.

Usage

Using the .query() method will send the BUS:B<x>:PSIFIVe:FRAMECONTrol? query.
Using the .verify(value) method will send the BUS:B<x>:PSIFIVe:FRAMECONTrol? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:PSIFIVe:FRAMECONTrol value command.

SCPI Syntax

- BUS:B<x>:PSIFIVe:FRAMECONTrol <NR1>
- BUS:B<x>:PSIFIVe:FRAMECONTrol?

Info

B<x> is the number of the bus.
<NR1> specifies the frame control value in bits. The default frame control value is 0 bits, otherwise it ranges between 0 to 4 bits.

BusBItemPsifiveMessaging ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:PSIFIVe:MESSaging command.

Description

This command sets or queries the PSI5 optional messaging bits.

Usage

Using the .query() method will send the BUS:B<x>:PSIFIVe:MESSaging? query.
Using the .verify(value) method will send the BUS:B<x>:PSIFIVe:MESSaging? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:PSIFIVe:MESSaging value command.

SCPI Syntax

- BUS:B<x>:PSIFIVe:MESSaging {OFF|ON}
- BUS:B<x>:PSIFIVe:MESSaging?

Info

B<x> is the number of the bus.
OFF specifies the messaging bits as the default value of 0.
ON specifies the messaging bits as 2.

BusBItemPsifiveSource ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:PSIFIVe:SOUrce command.

Description

This command sets or queries serial channel on or off.

Usage

Using the .query() method will send the BUS:B<x>:PSIFIVe:SOUrce? query.
Using the .verify(value) method will send the BUS:B<x>:PSIFIVe:SOUrce? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:PSIFIVe:SOUrce value command.

SCPI Syntax

- BUS:B<x>:PSIFIVe:SOUrce {S<x>_Ch<x>|CH<x>|MATH<x>|REF<x>}
- BUS:B<x>:PSIFIVe:SOUrce?

Info

B<x> is the number of the bus.
S<x>_Ch<x> specifies the remote scope number and the analog channel.
CH<x> specifies an analog channel as the source.
MATH<x> specifies a math waveform as the source.
REF<x> specifies a digital reference waveform as the source.

BusBItemPsifiveStatus ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:PSIFIVe:STATus command.

Description

This command sets or queries the optional status bits of PSI5.

Usage

Using the .query() method will send the BUS:B<x>:PSIFIVe:STATus? query.
Using the .verify(value) method will send the BUS:B<x>:PSIFIVe:STATus? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:PSIFIVe:STATus value command.

SCPI Syntax

- BUS:B<x>:PSIFIVe:STATus <NR1>
- BUS:B<x>:PSIFIVe:STATus?

Info

B<x> is the number of the bus.
<NR1> specifies the status value in bits. The default status value is 0 bits, otherwise it ranges between 0 to 2 bits.

BusBItemPsifiveSyncmode ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:PSIFIVe:SYNCMODe command.

Description

This command sets or queries the PSI5 Sync Mode.

Usage

Using the .query() method will send the BUS:B<x>:PSIFIVe:SYNCMODe? query.
Using the .verify(value) method will send the BUS:B<x>:PSIFIVe:SYNCMODe? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:PSIFIVe:SYNCMODe value command.

SCPI Syntax

- BUS:B<x>:PSIFIVe:SYNCMODe {PULSEWIDTh|TOOTHGAP}
- BUS:B<x>:PSIFIVe:SYNCMODe?

Info

B<x> is the number of the bus.
PULSEWIDTh specifies the Sync Mode as Pulse Width.
TOOTHGAP specifies the Sync Mode as Tooth Gap.

BusBItemPsifiveSyncthreshold ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:PSIFIVe:SYNCTHRESHold command.

Description

This command sets or queries the PSI5 threshold for the ECU To Sensor specified bus.

Usage

Using the .query() method will send the BUS:B<x>:PSIFIVe:SYNCTHRESHold? query.
Using the .verify(value) method will send the BUS:B<x>:PSIFIVe:SYNCTHRESHold? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:PSIFIVe:SYNCTHRESHold value command.

SCPI Syntax

- BUS:B<x>:PSIFIVe:SYNCTHRESHold <NR3>
- BUS:B<x>:PSIFIVe:SYNCTHRESHold?

Info

B<x> is the number of the bus.
<NR3> specifies the PSI5 Strobe threshold for the specified bus. The threshold range is -8 V to +8 V.

BusBItemPsifiveThreshold ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:PSIFIVe:THRESHold command.

Description

This command sets or queries the PSI5 threshold for the Sensor To ECU specified bus.

Usage

Using the .query() method will send the BUS:B<x>:PSIFIVe:THRESHold? query.
Using the .verify(value) method will send the BUS:B<x>:PSIFIVe:THRESHold? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:PSIFIVe:THRESHold value command.

SCPI Syntax

- BUS:B<x>:PSIFIVe:THRESHold <NR3>
- BUS:B<x>:PSIFIVe:THRESHold?

Info

B<x> is the number of the bus.
<NR3> specifies the PSI5 Strobe threshold for the specified bus. The threshold range is -8 V to +8 V.

BusBItemRs232c ¶

Bases: SCPICmdRead

The BUS:B<x>:RS232C command tree.

Usage

Using the .query() method will send the BUS:B<x>:RS232C? query.
Using the .verify(value) method will send the BUS:B<x>:RS232C? query and raise an AssertionError if the returned value does not match value.

Info

B<x> is the number of the bus.

Properties

.bitrate: The BUS:B<x>:RS232C:BITRate command.
.databits: The BUS:B<x>:RS232C:DATABits command.
.delimiter: The BUS:B<x>:RS232C:DELIMiter command.
.displaymode: The BUS:B<x>:RS232C:DISplaymode command.
.parity: The BUS:B<x>:RS232C:PARity command.
.polarity: The BUS:B<x>:RS232C:POLarity command.
.source: The BUS:B<x>:RS232C:SOUrce command.

bitrate `property` ¶

bitrate: BusBItemRs232cBitrate

Return the BUS:B<x>:RS232C:BITRate command.

Description

This command sets or queries the RS-232C bit rate for bus, where the bus number is specified by x. If you select Custom, use BUS:BX:RS232C:BITRATE:CUSTOM to set the bit rate.

Usage

Using the .query() method will send the BUS:B<x>:RS232C:BITRate? query.
Using the .verify(value) method will send the BUS:B<x>:RS232C:BITRate? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:RS232C:BITRate value command.

SCPI Syntax

- BUS:B<x>:RS232C:BITRate {CUSTOM|RATE300|RATE1K|RATE2K|RATE9K|RATE19K|RATE38K|RATE115K|RATE921K}
- BUS:B<x>:RS232C:BITRate?

Info

B<x> is the number of the bus.

Sub-properties

.custom: The BUS:B<x>:RS232C:BITRate:CUSTom command.

databits `property` ¶

databits: BusBItemRs232cDatabits

Return the BUS:B<x>:RS232C:DATABits command.

Description

This command specifies the number of bits in the data frame for the RS-232 bus.

Usage

Using the .query() method will send the BUS:B<x>:RS232C:DATABits? query.
Using the .verify(value) method will send the BUS:B<x>:RS232C:DATABits? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:RS232C:DATABits value command.

SCPI Syntax

- BUS:B<x>:RS232C:DATABits {7|8|9}
- BUS:B<x>:RS232C:DATABits?

Info

B<x> is the number of the bus.
7 specifies the number of bits as 7 in the RS-232C data frame.
8 specifies the number of bits as 8 in the RS-232C data frame.
9 specifies the number of bits as 9 in the RS-232C data frame.

delimiter `property` ¶

delimiter: BusBItemRs232cDelimiter

Return the BUS:B<x>:RS232C:DELIMiter command.

Description

This command sets or queries the RS-232C string delimiter on bus , where the bus number is specified by x. This command only applies when Packet view is turned On.

Usage

Using the .query() method will send the BUS:B<x>:RS232C:DELIMiter? query.
Using the .verify(value) method will send the BUS:B<x>:RS232C:DELIMiter? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:RS232C:DELIMiter value command.

SCPI Syntax

- BUS:B<x>:RS232C:DELIMiter {NULl|CR|LF|SPace|XFF}
- BUS:B<x>:RS232C:DELIMiter?

Info

B<x> is the number of the bus.
NULl specifies NULL (0x00 ) delimiting value for a packet.
CR specifies CR (0x0D) delimiting value for a packet.
LF specifies LF (0x0A) delimiting value for a packet.
XFF specifies XFF (0xFF) delimiting value for a packet.
SPace specifies SPace delimiting value for a packet.

displaymode `property` ¶

displaymode: BusBItemRs232cDisplaymode

Return the BUS:B<x>:RS232C:DISplaymode command.

Description

This command sets or queries the RS-232C display mode for the specified bus. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:RS232C:DISplaymode? query.
Using the .verify(value) method will send the BUS:B<x>:RS232C:DISplaymode? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:RS232C:DISplaymode value command.

SCPI Syntax

- BUS:B<x>:RS232C:DISplaymode {FRame|PACKET}
- BUS:B<x>:RS232C:DISplaymode?

Info

B<x> is the number of the bus.
FRame displays each frame as a single entity.
PACKET displays a group of frames terminated with a single frame defined by the BUS:B<x>:RS232C:DELImiter command.

parity `property` ¶

parity: BusBItemRs232cParity

Return the BUS:B<x>:RS232C:PARity command.

Description

This command sets or queries the RS-232C parity for bus , where the bus number is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:RS232C:PARity? query.
Using the .verify(value) method will send the BUS:B<x>:RS232C:PARity? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:RS232C:PARity value command.

SCPI Syntax

- BUS:B<x>:RS232C:PARity {NONe|EVEN|ODD}
- BUS:B<x>:RS232C:PARity?

Info

B<x> is the number of the bus.
NONe specifies no parity.
EVEN specifies even parity.
ODD specifies odd parity.

polarity `property` ¶

polarity: BusBItemRs232cPolarity

Return the BUS:B<x>:RS232C:POLarity command.

Description

This command sets or queries the RS-232C source polarity for bus , where the bus number is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:RS232C:POLarity? query.
Using the .verify(value) method will send the BUS:B<x>:RS232C:POLarity? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:RS232C:POLarity value command.

SCPI Syntax

- BUS:B<x>:RS232C:POLarity {NORmal|INVERTed}
- BUS:B<x>:RS232C:POLarity?

Info

B<x> is the number of the bus.
NORmal sets the RS-232C bus polarity to positive.
INVERTed sets the RS-232C bus polarity to negative.

source `property` ¶

source: BusBItemRs232cSource

Return the BUS:B<x>:RS232C:SOUrce command.

Description

This command sets or queries the RS-232C source for bus , where the bus number is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:RS232C:SOUrce? query.
Using the .verify(value) method will send the BUS:B<x>:RS232C:SOUrce? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:RS232C:SOUrce value command.

SCPI Syntax

- BUS:B<x>:RS232C:SOUrce {S<x>_Ch<x>_D<x>|CH<x>|CH<x>_D<x>|REF<x>|MATH<x>|REF<x>_D<x>}
- BUS:B<x>:RS232C:SOUrce?

Info

B<x> is the number of the bus.
S<x>_Ch<x>_D<x> specifies the remote scope number, the analog channel and the digital channel as the source.
CH<x> specifies an analog channel to use as the RS-232C source.
CH<x>_D<x> specifies a digital channel of a specified FlexChannel to use for the RS-232C source.
MATH<x> specifies a math channel to use for the RS-232C source.
REF<x> specifies a reference channel to use for the RS-232C source.
REF<x>_D<x> specifies a digital reference waveform as the source waveform for the specified RS-232C bus.

Sub-properties

.threshold: The BUS:B<x>:RS232C:SOUrce:THReshold command.

BusBItemRs232cBitrate ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:RS232C:BITRate command.

Description

This command sets or queries the RS-232C bit rate for bus, where the bus number is specified by x. If you select Custom, use BUS:BX:RS232C:BITRATE:CUSTOM to set the bit rate.

Usage

Using the .query() method will send the BUS:B<x>:RS232C:BITRate? query.
Using the .verify(value) method will send the BUS:B<x>:RS232C:BITRate? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:RS232C:BITRate value command.

SCPI Syntax

- BUS:B<x>:RS232C:BITRate {CUSTOM|RATE300|RATE1K|RATE2K|RATE9K|RATE19K|RATE38K|RATE115K|RATE921K}
- BUS:B<x>:RS232C:BITRate?

Info

B<x> is the number of the bus.

Properties

.custom: The BUS:B<x>:RS232C:BITRate:CUSTom command.

custom `property` ¶

custom: BusBItemRs232cBitrateCustom

Return the BUS:B<x>:RS232C:BITRate:CUSTom command.

Description

This command sets or queries the RS-232C custom bit rate for the specified bus. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:RS232C:BITRate:CUSTom? query.
Using the .verify(value) method will send the BUS:B<x>:RS232C:BITRate:CUSTom? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:RS232C:BITRate:CUSTom value command.

SCPI Syntax

- BUS:B<x>:RS232C:BITRate:CUSTom <NR1>
- BUS:B<x>:RS232C:BITRate:CUSTom?

Info

B<x> is the number of the bus.
<NR1> is the custom bit rate.

BusBItemRs232cBitrateCustom ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:RS232C:BITRate:CUSTom command.

Description

This command sets or queries the RS-232C custom bit rate for the specified bus. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:RS232C:BITRate:CUSTom? query.
Using the .verify(value) method will send the BUS:B<x>:RS232C:BITRate:CUSTom? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:RS232C:BITRate:CUSTom value command.

SCPI Syntax

- BUS:B<x>:RS232C:BITRate:CUSTom <NR1>
- BUS:B<x>:RS232C:BITRate:CUSTom?

Info

B<x> is the number of the bus.
<NR1> is the custom bit rate.

BusBItemRs232cDatabits ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:RS232C:DATABits command.

Description

This command specifies the number of bits in the data frame for the RS-232 bus.

Usage

Using the .query() method will send the BUS:B<x>:RS232C:DATABits? query.
Using the .verify(value) method will send the BUS:B<x>:RS232C:DATABits? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:RS232C:DATABits value command.

SCPI Syntax

- BUS:B<x>:RS232C:DATABits {7|8|9}
- BUS:B<x>:RS232C:DATABits?

Info

B<x> is the number of the bus.
7 specifies the number of bits as 7 in the RS-232C data frame.
8 specifies the number of bits as 8 in the RS-232C data frame.
9 specifies the number of bits as 9 in the RS-232C data frame.

BusBItemRs232cDelimiter ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:RS232C:DELIMiter command.

Description

This command sets or queries the RS-232C string delimiter on bus , where the bus number is specified by x. This command only applies when Packet view is turned On.

Usage

Using the .query() method will send the BUS:B<x>:RS232C:DELIMiter? query.
Using the .verify(value) method will send the BUS:B<x>:RS232C:DELIMiter? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:RS232C:DELIMiter value command.

SCPI Syntax

- BUS:B<x>:RS232C:DELIMiter {NULl|CR|LF|SPace|XFF}
- BUS:B<x>:RS232C:DELIMiter?

Info

B<x> is the number of the bus.
NULl specifies NULL (0x00 ) delimiting value for a packet.
CR specifies CR (0x0D) delimiting value for a packet.
LF specifies LF (0x0A) delimiting value for a packet.
XFF specifies XFF (0xFF) delimiting value for a packet.
SPace specifies SPace delimiting value for a packet.

BusBItemRs232cDisplaymode ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:RS232C:DISplaymode command.

Description

This command sets or queries the RS-232C display mode for the specified bus. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:RS232C:DISplaymode? query.
Using the .verify(value) method will send the BUS:B<x>:RS232C:DISplaymode? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:RS232C:DISplaymode value command.

SCPI Syntax

- BUS:B<x>:RS232C:DISplaymode {FRame|PACKET}
- BUS:B<x>:RS232C:DISplaymode?

Info

B<x> is the number of the bus.
FRame displays each frame as a single entity.
PACKET displays a group of frames terminated with a single frame defined by the BUS:B<x>:RS232C:DELImiter command.

BusBItemRs232cParity ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:RS232C:PARity command.

Description

This command sets or queries the RS-232C parity for bus , where the bus number is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:RS232C:PARity? query.
Using the .verify(value) method will send the BUS:B<x>:RS232C:PARity? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:RS232C:PARity value command.

SCPI Syntax

- BUS:B<x>:RS232C:PARity {NONe|EVEN|ODD}
- BUS:B<x>:RS232C:PARity?

Info

B<x> is the number of the bus.
NONe specifies no parity.
EVEN specifies even parity.
ODD specifies odd parity.

BusBItemRs232cPolarity ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:RS232C:POLarity command.

Description

This command sets or queries the RS-232C source polarity for bus , where the bus number is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:RS232C:POLarity? query.
Using the .verify(value) method will send the BUS:B<x>:RS232C:POLarity? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:RS232C:POLarity value command.

SCPI Syntax

- BUS:B<x>:RS232C:POLarity {NORmal|INVERTed}
- BUS:B<x>:RS232C:POLarity?

Info

B<x> is the number of the bus.
NORmal sets the RS-232C bus polarity to positive.
INVERTed sets the RS-232C bus polarity to negative.

BusBItemRs232cSource ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:RS232C:SOUrce command.

Description

This command sets or queries the RS-232C source for bus , where the bus number is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:RS232C:SOUrce? query.
Using the .verify(value) method will send the BUS:B<x>:RS232C:SOUrce? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:RS232C:SOUrce value command.

SCPI Syntax

- BUS:B<x>:RS232C:SOUrce {S<x>_Ch<x>_D<x>|CH<x>|CH<x>_D<x>|REF<x>|MATH<x>|REF<x>_D<x>}
- BUS:B<x>:RS232C:SOUrce?

Info

B<x> is the number of the bus.
S<x>_Ch<x>_D<x> specifies the remote scope number, the analog channel and the digital channel as the source.
CH<x> specifies an analog channel to use as the RS-232C source.
CH<x>_D<x> specifies a digital channel of a specified FlexChannel to use for the RS-232C source.
MATH<x> specifies a math channel to use for the RS-232C source.
REF<x> specifies a reference channel to use for the RS-232C source.
REF<x>_D<x> specifies a digital reference waveform as the source waveform for the specified RS-232C bus.

Properties

.threshold: The BUS:B<x>:RS232C:SOUrce:THReshold command.

threshold `property` ¶

threshold: BusBItemRs232cSourceThreshold

Return the BUS:B<x>:RS232C:SOUrce:THReshold command.

Description

This command sets or queries the RS-232C source threshold for the specified bus. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:RS232C:SOUrce:THReshold? query.
Using the .verify(value) method will send the BUS:B<x>:RS232C:SOUrce:THReshold? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:RS232C:SOUrce:THReshold value command.

SCPI Syntax

- BUS:B<x>:RS232C:SOUrce:THReshold <NR3>
- BUS:B<x>:RS232C:SOUrce:THReshold?

Info

B<x> is the number of the bus.
<NR3> is the RS-232C source threshold for the specified bus.

BusBItemRs232cSourceThreshold ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:RS232C:SOUrce:THReshold command.

Description

This command sets or queries the RS-232C source threshold for the specified bus. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:RS232C:SOUrce:THReshold? query.
Using the .verify(value) method will send the BUS:B<x>:RS232C:SOUrce:THReshold? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:RS232C:SOUrce:THReshold value command.

SCPI Syntax

- BUS:B<x>:RS232C:SOUrce:THReshold <NR3>
- BUS:B<x>:RS232C:SOUrce:THReshold?

Info

B<x> is the number of the bus.
<NR3> is the RS-232C source threshold for the specified bus.

BusBItemS8b10b ¶

Bases: SCPICmdRead

The BUS:B<x>:S8B10B command tree.

Usage

Using the .query() method will send the BUS:B<x>:S8B10B? query.
Using the .verify(value) method will send the BUS:B<x>:S8B10B? query and raise an AssertionError if the returned value does not match value.

Info

B<x> is the number of the bus.

Properties

.bitrate: The BUS:B<x>:S8B10B:BITRate command.
.source: The BUS:B<x>:S8B10B:SOUrce command.
.threshold: The BUS:B<x>:S8B10B:THReshold command.

bitrate `property` ¶

bitrate: BusBItemS8b10bBitrate

Return the BUS:B<x>:S8B10B:BITRate command.

Description

This command sets or queries the 8B10b bit rate for the specified bus, where the bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:S8B10B:BITRate? query.
Using the .verify(value) method will send the BUS:B<x>:S8B10B:BITRate? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:S8B10B:BITRate value command.

SCPI Syntax

- BUS:B<x>:S8B10B:BITRate <NR1>
- BUS:B<x>:S8B10B:BITRate?

Info

B<x> is the number of the bus.
<NR1> sets the bit rate for the specified bus. Arguments are the available bit rates up to 1 Tbps.

source `property` ¶

source: BusBItemS8b10bSource

Return the BUS:B<x>:S8B10B:SOUrce command.

Description

This command sets or queries the 8B10b source for the specified bus, where the bus is specified by x. This command specifies the source channel.

Usage

Using the .query() method will send the BUS:B<x>:S8B10B:SOUrce? query.
Using the .verify(value) method will send the BUS:B<x>:S8B10B:SOUrce? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:S8B10B:SOUrce value command.

SCPI Syntax

- BUS:B<x>:S8B10B:SOUrce {S<x>_Ch<x>|CH<x>|MATH<x>|REF<x>}
- BUS:B<x>:S8B10B:SOUrce?

Info

B<x> is the number of the bus.
S<x>_Ch<x> specifies the remote scope number and the analog channel.
CH<x> specifies an analog channel as the source.
MATH<x> specifies a math waveform as the source.
REF<x> specifies a digital reference waveform as the source.

threshold `property` ¶

threshold: BusBItemS8b10bThreshold

Return the BUS:B<x>:S8B10B:THReshold command.

Description

This command sets or queries the 8B10b threshold for the specified bus, where the bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:S8B10B:THReshold? query.
Using the .verify(value) method will send the BUS:B<x>:S8B10B:THReshold? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:S8B10B:THReshold value command.

SCPI Syntax

- BUS:B<x>:S8B10B:THReshold <NR3>
- BUS:B<x>:S8B10B:THReshold?

Info

B<x> is the number of the bus.
<NR3> is the 8B10b Strobe threshold for the specified bus in volts. The valid range is -8V to +8V.

BusBItemS8b10bBitrate ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:S8B10B:BITRate command.

Description

This command sets or queries the 8B10b bit rate for the specified bus, where the bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:S8B10B:BITRate? query.
Using the .verify(value) method will send the BUS:B<x>:S8B10B:BITRate? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:S8B10B:BITRate value command.

SCPI Syntax

- BUS:B<x>:S8B10B:BITRate <NR1>
- BUS:B<x>:S8B10B:BITRate?

Info

B<x> is the number of the bus.
<NR1> sets the bit rate for the specified bus. Arguments are the available bit rates up to 1 Tbps.

BusBItemS8b10bSource ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:S8B10B:SOUrce command.

Description

This command sets or queries the 8B10b source for the specified bus, where the bus is specified by x. This command specifies the source channel.

Usage

Using the .query() method will send the BUS:B<x>:S8B10B:SOUrce? query.
Using the .verify(value) method will send the BUS:B<x>:S8B10B:SOUrce? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:S8B10B:SOUrce value command.

SCPI Syntax

- BUS:B<x>:S8B10B:SOUrce {S<x>_Ch<x>|CH<x>|MATH<x>|REF<x>}
- BUS:B<x>:S8B10B:SOUrce?

Info

B<x> is the number of the bus.
S<x>_Ch<x> specifies the remote scope number and the analog channel.
CH<x> specifies an analog channel as the source.
MATH<x> specifies a math waveform as the source.
REF<x> specifies a digital reference waveform as the source.

BusBItemS8b10bThreshold ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:S8B10B:THReshold command.

Description

This command sets or queries the 8B10b threshold for the specified bus, where the bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:S8B10B:THReshold? query.
Using the .verify(value) method will send the BUS:B<x>:S8B10B:THReshold? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:S8B10B:THReshold value command.

SCPI Syntax

- BUS:B<x>:S8B10B:THReshold <NR3>
- BUS:B<x>:S8B10B:THReshold?

Info

B<x> is the number of the bus.
<NR3> is the 8B10b Strobe threshold for the specified bus in volts. The valid range is -8V to +8V.

BusBItemSdlc ¶

Bases: SCPICmdRead

The BUS:B<x>:SDLC command tree.

Usage

Using the .query() method will send the BUS:B<x>:SDLC? query.
Using the .verify(value) method will send the BUS:B<x>:SDLC? query and raise an AssertionError if the returned value does not match value.

Info

B<x> is the number of the bus.

Properties

.bitrate: The BUS:B<x>:SDLC:BITRate command.
.data: The BUS:B<x>:SDLC:DATA command tree.
.encoding: The BUS:B<x>:SDLC:ENCoding command.
.modulo: The BUS:B<x>:SDLC:MODulo command.

bitrate `property` ¶

bitrate: BusBItemSdlcBitrate

Return the BUS:B<x>:SDLC:BITRate command.

Description

This command sets or queries the bit rate for the specified SDLC bus. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:SDLC:BITRate? query.
Using the .verify(value) method will send the BUS:B<x>:SDLC:BITRate? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:SDLC:BITRate value command.

SCPI Syntax

- BUS:B<x>:SDLC:BITRate <NR1>
- BUS:B<x>:SDLC:BITRate?

Info

B<x> is the number of the bus.
<NR1> specifies the bit rate. The default bit rate is 10 kbs and varies 300 ~ 1000000000.

data `property` ¶

data: BusBItemSdlcData

Return the BUS:B<x>:SDLC:DATA command tree.

Usage

Using the .query() method will send the BUS:B<x>:SDLC:DATA? query.
Using the .verify(value) method will send the BUS:B<x>:SDLC:DATA? query and raise an AssertionError if the returned value does not match value.

Info

B<x> is the number of the bus.

Sub-properties

.source: The BUS:B<x>:SDLC:DATA:SOUrce command.
.threshold: The BUS:B<x>:SDLC:DATA:THReshold command.

encoding `property` ¶

encoding: BusBItemSdlcEncoding

Return the BUS:B<x>:SDLC:ENCoding command.

Description

This command sets or queries the SDLC Bus Encoding. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:SDLC:ENCoding? query.
Using the .verify(value) method will send the BUS:B<x>:SDLC:ENCoding? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:SDLC:ENCoding value command.

SCPI Syntax

- BUS:B<x>:SDLC:ENCoding {DISCrete|INVert}
- BUS:B<x>:SDLC:ENCoding?

Info

B<x> is the number of the bus waveform.
DISCrete specifies the encoding mechanism is Discrete Transmission (NRZ).
INVert specifies that encoding mechanism is Invert On Zero i.e. NRZI.

modulo `property` ¶

modulo: BusBItemSdlcModulo

Return the BUS:B<x>:SDLC:MODulo command.

Description

This command sets or queries the SDLC Bus Modulo. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:SDLC:MODulo? query.
Using the .verify(value) method will send the BUS:B<x>:SDLC:MODulo? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:SDLC:MODulo value command.

SCPI Syntax

- BUS:B<x>:SDLC:MODulo {8|128}
- BUS:B<x>:SDLC:MODulo?

Info

B<x> is the number of the bus waveform.
8 specifies the C-Field size is 8 bit in SDLC frame.
128 specifies the C-Field size is 16 bit in SDLC frame.

BusBItemSdlcBitrate ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:SDLC:BITRate command.

Description

This command sets or queries the bit rate for the specified SDLC bus. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:SDLC:BITRate? query.
Using the .verify(value) method will send the BUS:B<x>:SDLC:BITRate? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:SDLC:BITRate value command.

SCPI Syntax

- BUS:B<x>:SDLC:BITRate <NR1>
- BUS:B<x>:SDLC:BITRate?

Info

B<x> is the number of the bus.
<NR1> specifies the bit rate. The default bit rate is 10 kbs and varies 300 ~ 1000000000.

BusBItemSdlcData ¶

Bases: SCPICmdRead

The BUS:B<x>:SDLC:DATA command tree.

Usage

Using the .query() method will send the BUS:B<x>:SDLC:DATA? query.
Using the .verify(value) method will send the BUS:B<x>:SDLC:DATA? query and raise an AssertionError if the returned value does not match value.

Info

B<x> is the number of the bus.

Properties

.source: The BUS:B<x>:SDLC:DATA:SOUrce command.
.threshold: The BUS:B<x>:SDLC:DATA:THReshold command.

source `property` ¶

source: BusBItemSdlcDataSource

Return the BUS:B<x>:SDLC:DATA:SOUrce command.

Description

This command sets or queries the source for the specified bus. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:SDLC:DATA:SOUrce? query.
Using the .verify(value) method will send the BUS:B<x>:SDLC:DATA:SOUrce? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:SDLC:DATA:SOUrce value command.

SCPI Syntax

- BUS:B<x>:SDLC:DATA:SOUrce {S<x>_Ch<x>|CH<x>|MATH<x>|REF<x>}
- BUS:B<x>:SDLC:DATA:SOUrce?

Info

B<x> is the number of the bus.
S<x>_Ch<x> specifies the remote scope number and the analog channel.
CH<x> specifies an analog channel as the source.
MATH<x> specifies a math waveform as the source.
REF<x> specifies a digital reference waveform as the source.

threshold `property` ¶

threshold: BusBItemSdlcDataThreshold

Return the BUS:B<x>:SDLC:DATA:THReshold command.

Description

This command sets or queries the SDLC data source threshold for the specified bus. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:SDLC:DATA:THReshold? query.
Using the .verify(value) method will send the BUS:B<x>:SDLC:DATA:THReshold? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:SDLC:DATA:THReshold value command.

SCPI Syntax

- BUS:B<x>:SDLC:DATA:THReshold <NR3>
- BUS:B<x>:SDLC:DATA:THReshold?

Info

B<x> is the number of the bus.
<NR3> is the SDLC Strobe threshold for the specified bus. The valid range is -8V to +8V.

BusBItemSdlcDataSource ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:SDLC:DATA:SOUrce command.

Description

This command sets or queries the source for the specified bus. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:SDLC:DATA:SOUrce? query.
Using the .verify(value) method will send the BUS:B<x>:SDLC:DATA:SOUrce? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:SDLC:DATA:SOUrce value command.

SCPI Syntax

- BUS:B<x>:SDLC:DATA:SOUrce {S<x>_Ch<x>|CH<x>|MATH<x>|REF<x>}
- BUS:B<x>:SDLC:DATA:SOUrce?

Info

B<x> is the number of the bus.
S<x>_Ch<x> specifies the remote scope number and the analog channel.
CH<x> specifies an analog channel as the source.
MATH<x> specifies a math waveform as the source.
REF<x> specifies a digital reference waveform as the source.

BusBItemSdlcDataThreshold ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:SDLC:DATA:THReshold command.

Description

This command sets or queries the SDLC data source threshold for the specified bus. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:SDLC:DATA:THReshold? query.
Using the .verify(value) method will send the BUS:B<x>:SDLC:DATA:THReshold? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:SDLC:DATA:THReshold value command.

SCPI Syntax

- BUS:B<x>:SDLC:DATA:THReshold <NR3>
- BUS:B<x>:SDLC:DATA:THReshold?

Info

B<x> is the number of the bus.
<NR3> is the SDLC Strobe threshold for the specified bus. The valid range is -8V to +8V.

BusBItemSdlcEncoding ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:SDLC:ENCoding command.

Description

This command sets or queries the SDLC Bus Encoding. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:SDLC:ENCoding? query.
Using the .verify(value) method will send the BUS:B<x>:SDLC:ENCoding? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:SDLC:ENCoding value command.

SCPI Syntax

- BUS:B<x>:SDLC:ENCoding {DISCrete|INVert}
- BUS:B<x>:SDLC:ENCoding?

Info

B<x> is the number of the bus waveform.
DISCrete specifies the encoding mechanism is Discrete Transmission (NRZ).
INVert specifies that encoding mechanism is Invert On Zero i.e. NRZI.

BusBItemSdlcModulo ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:SDLC:MODulo command.

Description

This command sets or queries the SDLC Bus Modulo. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:SDLC:MODulo? query.
Using the .verify(value) method will send the BUS:B<x>:SDLC:MODulo? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:SDLC:MODulo value command.

SCPI Syntax

- BUS:B<x>:SDLC:MODulo {8|128}
- BUS:B<x>:SDLC:MODulo?

Info

B<x> is the number of the bus waveform.
8 specifies the C-Field size is 8 bit in SDLC frame.
128 specifies the C-Field size is 16 bit in SDLC frame.

BusBItemSent ¶

Bases: SCPICmdRead

The BUS:B<x>:SENT command tree.

Usage

Using the .query() method will send the BUS:B<x>:SENT? query.
Using the .verify(value) method will send the BUS:B<x>:SENT? query and raise an AssertionError if the returned value does not match value.

Info

B<x> is the number of the bus waveform.

Properties

.chanwidth: The BUS:B<x>:SENT:CHANWidth command.
.nibblecount: The BUS:B<x>:SENT:NIBBLECount command.
.numchannel: The BUS:B<x>:SENT:NUMCHANnel command.
.pausepulse: The BUS:B<x>:SENT:PAUSEPULSe command.
.polarity: The BUS:B<x>:SENT:POLARITY command.
.slow: The BUS:B<x>:SENT:SLOW command.
.source: The BUS:B<x>:SENT:SOUrce command.
.threshold: The BUS:B<x>:SENT:THRESHold command.
.ticktime: The BUS:B<x>:SENT:TICKTIME command.
.ticktolerance: The BUS:B<x>:SENT:TICKTOLerance command.

chanwidth `property` ¶

chanwidth: BusBItemSentChanwidth

Return the BUS:B<x>:SENT:CHANWidth command.

Description

This command sets or queries SENT fast channel bit widths for the specified bus.

Usage

Using the .query() method will send the BUS:B<x>:SENT:CHANWidth? query.
Using the .verify(value) method will send the BUS:B<x>:SENT:CHANWidth? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:SENT:CHANWidth value command.

SCPI Syntax

- BUS:B<x>:SENT:CHANWidth {TWELVEtwelve|FOURTEENten|SIXTEENeight}
- BUS:B<x>:SENT:CHANWidth?

Info

B<x> is the number of the bus waveform.
TWELVEtwelve sets both Fast Channel 1 and Fast Channel 2 to12 bits wide.
FOURTEENten sets Fast Channel 1 to 14 bits and Fast Channel 2 to 10 bits.
SIXTEENeight sets Fast Channel 1 to 16 bits and Fast Channel 2 to eight bits.

nibblecount `property` ¶

nibblecount: BusBItemSentNibblecount

Return the BUS:B<x>:SENT:NIBBLECount command.

Description

This command sets or queries SENT data nibbles for the specified bus.

Usage

Using the .query() method will send the BUS:B<x>:SENT:NIBBLECount? query.
Using the .verify(value) method will send the BUS:B<x>:SENT:NIBBLECount? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:SENT:NIBBLECount value command.

SCPI Syntax

- BUS:B<x>:SENT:NIBBLECount {THREE|FOUR|SIX}
- BUS:B<x>:SENT:NIBBLECount?

Info

B<x> is the number of the bus waveform.
THREE specifies regular data with 3 nibbles.
FOUR specifies regular data with 4nibbles.
SIX specifies regular data with 6nibbles.

numchannel `property` ¶

numchannel: BusBItemSentNumchannel

Return the BUS:B<x>:SENT:NUMCHANnel command.

Description

This command sets or queries SENT fast data channels for the specified bus.

Usage

Using the .query() method will send the BUS:B<x>:SENT:NUMCHANnel? query.
Using the .verify(value) method will send the BUS:B<x>:SENT:NUMCHANnel? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:SENT:NUMCHANnel value command.

SCPI Syntax

- BUS:B<x>:SENT:NUMCHANnel {ONE|TWO}
- BUS:B<x>:SENT:NUMCHANnel?

Info

B<x> is the number of the bus waveform.
ONE specifies a SENT bus with one fast channel.
TWO specifies a SENT bus with two fast channels.

pausepulse `property` ¶

pausepulse: BusBItemSentPausepulse

Return the BUS:B<x>:SENT:PAUSEPULSe command.

Description

This command sets or queries SENT pause pulse for the specified bus.

Usage

Using the .query() method will send the BUS:B<x>:SENT:PAUSEPULSe? query.
Using the .verify(value) method will send the BUS:B<x>:SENT:PAUSEPULSe? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:SENT:PAUSEPULSe value command.

SCPI Syntax

- BUS:B<x>:SENT:PAUSEPULSe {NO|YES}
- BUS:B<x>:SENT:PAUSEPULSe?

Info

B<x> is the number of the bus waveform.
NO specifies no pause pulse.
YES specifies a pause pulse is used.

polarity `property` ¶

polarity: BusBItemSentPolarity

Return the BUS:B<x>:SENT:POLARITY command.

Description

This command sets or queries SENT Idle State signal polarity for the specified bus.

Usage

Using the .query() method will send the BUS:B<x>:SENT:POLARITY? query.
Using the .verify(value) method will send the BUS:B<x>:SENT:POLARITY? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:SENT:POLARITY value command.

SCPI Syntax

- BUS:B<x>:SENT:POLARITY {INVerted|NORmal}
- BUS:B<x>:SENT:POLARITY?

Info

B<x> is the number of the bus waveform.
INVerted specifies inverted polarity.
NORmal specifies normal polarity.

slow `property` ¶

slow: BusBItemSentSlow

Return the BUS:B<x>:SENT:SLOW command.

Description

This command sets or queries the SENT slow channel configuration for the specified bus.

Usage

Using the .query() method will send the BUS:B<x>:SENT:SLOW? query.
Using the .verify(value) method will send the BUS:B<x>:SENT:SLOW? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:SENT:SLOW value command.

SCPI Syntax

- BUS:B<x>:SENT:SLOW {NOne|ENHANCED4|ENHANCED8|SHOrt}
- BUS:B<x>:SENT:SLOW?

Info

B<x> is the number of the bus waveform.
NOne specifies no slow channel configured.
ENHANCED4 specifies Enhanced 4 slow channel configuration.
ENHANCED8 specifies Enhanced 8 slow channel configuration.
SHOrt specifies short slow channel configuration.

source `property` ¶

source: BusBItemSentSource

Return the BUS:B<x>:SENT:SOUrce command.

Description

This command sets or queries the SENT DATA source for the specified bus.

Usage

Using the .query() method will send the BUS:B<x>:SENT:SOUrce? query.
Using the .verify(value) method will send the BUS:B<x>:SENT:SOUrce? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:SENT:SOUrce value command.

SCPI Syntax

- BUS:B<x>:SENT:SOUrce {S<x>_Ch<x>_D<x>|CH<x>|CH<x>_D<x>|Math<x>|REF<x>|REF<x>_D<x>}
- BUS:B<x>:SENT:SOUrce?

Info

B<x> is the number of the bus waveform.
S<x>_Ch<x>_D<x> specifies is the remote scope number, the analog channel and the digital channel.
CH<x> specifies an analog channel as the clock source waveform for the audio bus.
CH<x>_D<x> specifies a digital channel as the clock source waveform for the specified audio bus.
Math<x> specifies a math waveform as the clock source waveform for the audio bus.
REF<x> specifies a reference waveform as the clock source waveform for the audio bus.
REF<x>_D<x> specifies a digital reference waveform as the clock source waveform for the specified audio bus.

threshold `property` ¶

threshold: BusBItemSentThreshold

Return the BUS:B<x>:SENT:THRESHold command.

Description

This command sets or queries the SENT DATA source threshold for the specified bus.

Usage

Using the .query() method will send the BUS:B<x>:SENT:THRESHold? query.
Using the .verify(value) method will send the BUS:B<x>:SENT:THRESHold? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:SENT:THRESHold value command.

SCPI Syntax

- BUS:B<x>:SENT:THRESHold <NR3>
- BUS:B<x>:SENT:THRESHold?

Info

B<x> is the number of the bus waveform.
<NR3> sets the data source threshold value in volts.

ticktime `property` ¶

ticktime: BusBItemSentTicktime

Return the BUS:B<x>:SENT:TICKTIME command.

Description

This command sets or queries the SENT bus Clock Tick parameter for the specified bus.

Usage

Using the .query() method will send the BUS:B<x>:SENT:TICKTIME? query.
Using the .verify(value) method will send the BUS:B<x>:SENT:TICKTIME? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:SENT:TICKTIME value command.

SCPI Syntax

- BUS:B<x>:SENT:TICKTIME <NR3>
- BUS:B<x>:SENT:TICKTIME?

Info

B<x> is the number of the bus waveform.
<NR3> is the SENT clock tick time, in seconds.

ticktolerance `property` ¶

ticktolerance: BusBItemSentTicktolerance

Return the BUS:B<x>:SENT:TICKTOLerance command.

Description

This command sets or queries the SENT bus Tick Tolerance percent parameter for the specified bus.

Usage

Using the .query() method will send the BUS:B<x>:SENT:TICKTOLerance? query.
Using the .verify(value) method will send the BUS:B<x>:SENT:TICKTOLerance? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:SENT:TICKTOLerance value command.

SCPI Syntax

- BUS:B<x>:SENT:TICKTOLerance <NR3>
- BUS:B<x>:SENT:TICKTOLerance?

Info

B<x> is the number of the bus waveform.
<NR3> is the tick tolerance percentage.

BusBItemSentChanwidth ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:SENT:CHANWidth command.

Description

This command sets or queries SENT fast channel bit widths for the specified bus.

Usage

Using the .query() method will send the BUS:B<x>:SENT:CHANWidth? query.
Using the .verify(value) method will send the BUS:B<x>:SENT:CHANWidth? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:SENT:CHANWidth value command.

SCPI Syntax

- BUS:B<x>:SENT:CHANWidth {TWELVEtwelve|FOURTEENten|SIXTEENeight}
- BUS:B<x>:SENT:CHANWidth?

Info

B<x> is the number of the bus waveform.
TWELVEtwelve sets both Fast Channel 1 and Fast Channel 2 to12 bits wide.
FOURTEENten sets Fast Channel 1 to 14 bits and Fast Channel 2 to 10 bits.
SIXTEENeight sets Fast Channel 1 to 16 bits and Fast Channel 2 to eight bits.

BusBItemSentNibblecount ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:SENT:NIBBLECount command.

Description

This command sets or queries SENT data nibbles for the specified bus.

Usage

Using the .query() method will send the BUS:B<x>:SENT:NIBBLECount? query.
Using the .verify(value) method will send the BUS:B<x>:SENT:NIBBLECount? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:SENT:NIBBLECount value command.

SCPI Syntax

- BUS:B<x>:SENT:NIBBLECount {THREE|FOUR|SIX}
- BUS:B<x>:SENT:NIBBLECount?

Info

B<x> is the number of the bus waveform.
THREE specifies regular data with 3 nibbles.
FOUR specifies regular data with 4nibbles.
SIX specifies regular data with 6nibbles.

BusBItemSentNumchannel ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:SENT:NUMCHANnel command.

Description

This command sets or queries SENT fast data channels for the specified bus.

Usage

Using the .query() method will send the BUS:B<x>:SENT:NUMCHANnel? query.
Using the .verify(value) method will send the BUS:B<x>:SENT:NUMCHANnel? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:SENT:NUMCHANnel value command.

SCPI Syntax

- BUS:B<x>:SENT:NUMCHANnel {ONE|TWO}
- BUS:B<x>:SENT:NUMCHANnel?

Info

B<x> is the number of the bus waveform.
ONE specifies a SENT bus with one fast channel.
TWO specifies a SENT bus with two fast channels.

BusBItemSentPausepulse ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:SENT:PAUSEPULSe command.

Description

This command sets or queries SENT pause pulse for the specified bus.

Usage

Using the .query() method will send the BUS:B<x>:SENT:PAUSEPULSe? query.
Using the .verify(value) method will send the BUS:B<x>:SENT:PAUSEPULSe? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:SENT:PAUSEPULSe value command.

SCPI Syntax

- BUS:B<x>:SENT:PAUSEPULSe {NO|YES}
- BUS:B<x>:SENT:PAUSEPULSe?

Info

B<x> is the number of the bus waveform.
NO specifies no pause pulse.
YES specifies a pause pulse is used.

BusBItemSentPolarity ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:SENT:POLARITY command.

Description

This command sets or queries SENT Idle State signal polarity for the specified bus.

Usage

Using the .query() method will send the BUS:B<x>:SENT:POLARITY? query.
Using the .verify(value) method will send the BUS:B<x>:SENT:POLARITY? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:SENT:POLARITY value command.

SCPI Syntax

- BUS:B<x>:SENT:POLARITY {INVerted|NORmal}
- BUS:B<x>:SENT:POLARITY?

Info

B<x> is the number of the bus waveform.
INVerted specifies inverted polarity.
NORmal specifies normal polarity.

BusBItemSentSlow ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:SENT:SLOW command.

Description

This command sets or queries the SENT slow channel configuration for the specified bus.

Usage

Using the .query() method will send the BUS:B<x>:SENT:SLOW? query.
Using the .verify(value) method will send the BUS:B<x>:SENT:SLOW? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:SENT:SLOW value command.

SCPI Syntax

- BUS:B<x>:SENT:SLOW {NOne|ENHANCED4|ENHANCED8|SHOrt}
- BUS:B<x>:SENT:SLOW?

Info

B<x> is the number of the bus waveform.
NOne specifies no slow channel configured.
ENHANCED4 specifies Enhanced 4 slow channel configuration.
ENHANCED8 specifies Enhanced 8 slow channel configuration.
SHOrt specifies short slow channel configuration.

BusBItemSentSource ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:SENT:SOUrce command.

Description

This command sets or queries the SENT DATA source for the specified bus.

Usage

Using the .query() method will send the BUS:B<x>:SENT:SOUrce? query.
Using the .verify(value) method will send the BUS:B<x>:SENT:SOUrce? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:SENT:SOUrce value command.

SCPI Syntax

- BUS:B<x>:SENT:SOUrce {S<x>_Ch<x>_D<x>|CH<x>|CH<x>_D<x>|Math<x>|REF<x>|REF<x>_D<x>}
- BUS:B<x>:SENT:SOUrce?

Info

B<x> is the number of the bus waveform.
S<x>_Ch<x>_D<x> specifies is the remote scope number, the analog channel and the digital channel.
CH<x> specifies an analog channel as the clock source waveform for the audio bus.
CH<x>_D<x> specifies a digital channel as the clock source waveform for the specified audio bus.
Math<x> specifies a math waveform as the clock source waveform for the audio bus.
REF<x> specifies a reference waveform as the clock source waveform for the audio bus.
REF<x>_D<x> specifies a digital reference waveform as the clock source waveform for the specified audio bus.

BusBItemSentThreshold ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:SENT:THRESHold command.

Description

This command sets or queries the SENT DATA source threshold for the specified bus.

Usage

Using the .query() method will send the BUS:B<x>:SENT:THRESHold? query.
Using the .verify(value) method will send the BUS:B<x>:SENT:THRESHold? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:SENT:THRESHold value command.

SCPI Syntax

- BUS:B<x>:SENT:THRESHold <NR3>
- BUS:B<x>:SENT:THRESHold?

Info

B<x> is the number of the bus waveform.
<NR3> sets the data source threshold value in volts.

BusBItemSentTicktime ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:SENT:TICKTIME command.

Description

This command sets or queries the SENT bus Clock Tick parameter for the specified bus.

Usage

Using the .query() method will send the BUS:B<x>:SENT:TICKTIME? query.
Using the .verify(value) method will send the BUS:B<x>:SENT:TICKTIME? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:SENT:TICKTIME value command.

SCPI Syntax

- BUS:B<x>:SENT:TICKTIME <NR3>
- BUS:B<x>:SENT:TICKTIME?

Info

B<x> is the number of the bus waveform.
<NR3> is the SENT clock tick time, in seconds.

BusBItemSentTicktolerance ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:SENT:TICKTOLerance command.

Description

This command sets or queries the SENT bus Tick Tolerance percent parameter for the specified bus.

Usage

Using the .query() method will send the BUS:B<x>:SENT:TICKTOLerance? query.
Using the .verify(value) method will send the BUS:B<x>:SENT:TICKTOLerance? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:SENT:TICKTOLerance value command.

SCPI Syntax

- BUS:B<x>:SENT:TICKTOLerance <NR3>
- BUS:B<x>:SENT:TICKTOLerance?

Info

B<x> is the number of the bus waveform.
<NR3> is the tick tolerance percentage.

BusBItemSmbus ¶

Bases: SCPICmdRead

The BUS:B<x>:SMBUS command tree.

Usage

Using the .query() method will send the BUS:B<x>:SMBUS? query.
Using the .verify(value) method will send the BUS:B<x>:SMBUS? query and raise an AssertionError if the returned value does not match value.

Info

B<x> is the bus number.

Properties

.clock: The BUS:B<x>:SMBUS:CLOCk command tree.
.data: The BUS:B<x>:SMBUS:DATA command tree.
.pec: The BUS:B<x>:SMBUS:PEC command tree.

clock `property` ¶

clock: BusBItemSmbusClock

Return the BUS:B<x>:SMBUS:CLOCk command tree.

Usage

Using the .query() method will send the BUS:B<x>:SMBUS:CLOCk? query.
Using the .verify(value) method will send the BUS:B<x>:SMBUS:CLOCk? query and raise an AssertionError if the returned value does not match value.

Info

B<x> is the bus number.

Sub-properties

.source: The BUS:B<x>:SMBUS:CLOCk:SOUrce command.
.threshold: The BUS:B<x>:SMBUS:CLOCk:THReshold command.

data `property` ¶

data: BusBItemSmbusData

Return the BUS:B<x>:SMBUS:DATA command tree.

Usage

Using the .query() method will send the BUS:B<x>:SMBUS:DATA? query.
Using the .verify(value) method will send the BUS:B<x>:SMBUS:DATA? query and raise an AssertionError if the returned value does not match value.

Info

B<x> is the bus number.

Sub-properties

.source: The BUS:B<x>:SMBUS:DATA:SOUrce command.
.threshold: The BUS:B<x>:SMBUS:DATA:THReshold command.

pec `property` ¶

pec: BusBItemSmbusPec

Return the BUS:B<x>:SMBUS:PEC command tree.

Usage

Using the .query() method will send the BUS:B<x>:SMBUS:PEC? query.
Using the .verify(value) method will send the BUS:B<x>:SMBUS:PEC? query and raise an AssertionError if the returned value does not match value.

Info

B<x> is the bus number.

Sub-properties

.value: The BUS:B<x>:SMBUS:PEC:VALUe command.

BusBItemSmbusClock ¶

Bases: SCPICmdRead

The BUS:B<x>:SMBUS:CLOCk command tree.

Usage

Using the .query() method will send the BUS:B<x>:SMBUS:CLOCk? query.
Using the .verify(value) method will send the BUS:B<x>:SMBUS:CLOCk? query and raise an AssertionError if the returned value does not match value.

Info

B<x> is the bus number.

Properties

.source: The BUS:B<x>:SMBUS:CLOCk:SOUrce command.
.threshold: The BUS:B<x>:SMBUS:CLOCk:THReshold command.

source `property` ¶

source: BusBItemSmbusClockSource

Return the BUS:B<x>:SMBUS:CLOCk:SOUrce command.

Description

This command sets or queries the clock source for the specified bus.

Usage

Using the .query() method will send the BUS:B<x>:SMBUS:CLOCk:SOUrce? query.
Using the .verify(value) method will send the BUS:B<x>:SMBUS:CLOCk:SOUrce? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:SMBUS:CLOCk:SOUrce value command.

SCPI Syntax

- BUS:B<x>:SMBUS:CLOCk:SOUrce {S<x>_Ch<x>|CH<x>|MATH<x>|REF<x>}
- BUS:B<x>:SMBUS:CLOCk:SOUrce?

Info

B<x> is the bus number.
S<x>_Ch<x> specifies the remote scope number and the analog channel.
CH<x> specifies an analog channel as the source for the data signal, where is the channel number.
MATH<x> specifies a math channel as the source for the data signal, where is the math waveform number.
REF<x> specifies a reference waveform as the source for the data signal, where is the reference waveform number.

threshold `property` ¶

threshold: BusBItemSmbusClockThreshold

Return the BUS:B<x>:SMBUS:CLOCk:THReshold command.

Description

This command sets or queries the SMBUS clock source threshold for the specified bus.

Usage

Using the .query() method will send the BUS:B<x>:SMBUS:CLOCk:THReshold? query.
Using the .verify(value) method will send the BUS:B<x>:SMBUS:CLOCk:THReshold? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:SMBUS:CLOCk:THReshold value command.

SCPI Syntax

- BUS:B<x>:SMBUS:CLOCk:THReshold <NR3>
- BUS:B<x>:SMBUS:CLOCk:THReshold?

Info

B<x> is the bus number.
<NR3> specifies the SMBUS clock threshold for the specified bus. The valid range is -8V to +8V.

BusBItemSmbusClockSource ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:SMBUS:CLOCk:SOUrce command.

Description

This command sets or queries the clock source for the specified bus.

Usage

Using the .query() method will send the BUS:B<x>:SMBUS:CLOCk:SOUrce? query.
Using the .verify(value) method will send the BUS:B<x>:SMBUS:CLOCk:SOUrce? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:SMBUS:CLOCk:SOUrce value command.

SCPI Syntax

- BUS:B<x>:SMBUS:CLOCk:SOUrce {S<x>_Ch<x>|CH<x>|MATH<x>|REF<x>}
- BUS:B<x>:SMBUS:CLOCk:SOUrce?

Info

B<x> is the bus number.
S<x>_Ch<x> specifies the remote scope number and the analog channel.
CH<x> specifies an analog channel as the source for the data signal, where is the channel number.
MATH<x> specifies a math channel as the source for the data signal, where is the math waveform number.
REF<x> specifies a reference waveform as the source for the data signal, where is the reference waveform number.

BusBItemSmbusClockThreshold ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:SMBUS:CLOCk:THReshold command.

Description

This command sets or queries the SMBUS clock source threshold for the specified bus.

Usage

Using the .query() method will send the BUS:B<x>:SMBUS:CLOCk:THReshold? query.
Using the .verify(value) method will send the BUS:B<x>:SMBUS:CLOCk:THReshold? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:SMBUS:CLOCk:THReshold value command.

SCPI Syntax

- BUS:B<x>:SMBUS:CLOCk:THReshold <NR3>
- BUS:B<x>:SMBUS:CLOCk:THReshold?

Info

B<x> is the bus number.
<NR3> specifies the SMBUS clock threshold for the specified bus. The valid range is -8V to +8V.

BusBItemSmbusData ¶

Bases: SCPICmdRead

The BUS:B<x>:SMBUS:DATA command tree.

Usage

Using the .query() method will send the BUS:B<x>:SMBUS:DATA? query.
Using the .verify(value) method will send the BUS:B<x>:SMBUS:DATA? query and raise an AssertionError if the returned value does not match value.

Info

B<x> is the bus number.

Properties

.source: The BUS:B<x>:SMBUS:DATA:SOUrce command.
.threshold: The BUS:B<x>:SMBUS:DATA:THReshold command.

source `property` ¶

source: BusBItemSmbusDataSource

Return the BUS:B<x>:SMBUS:DATA:SOUrce command.

Description

This command sets or queries the data source for the specified bus.

Usage

Using the .query() method will send the BUS:B<x>:SMBUS:DATA:SOUrce? query.
Using the .verify(value) method will send the BUS:B<x>:SMBUS:DATA:SOUrce? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:SMBUS:DATA:SOUrce value command.

SCPI Syntax

- BUS:B<x>:SMBUS:DATA:SOUrce {S<x>_Ch<x>|CH<x>|MATH<x>|REF<x>}
- BUS:B<x>:SMBUS:DATA:SOUrce?

Info

B<x> is the bus number.
S<x>_Ch<x> specifies the remote scope number and the analog channel.
CH<x> specifies an analog channel as the source for the data signal, where is the channel number.
MATH<x> specifies a math channel as the source for the data signal, where is the math waveform number.
REF<x> specifies a reference waveform as the source for the data signal, where is the reference waveform number.

threshold `property` ¶

threshold: BusBItemSmbusDataThreshold

Return the BUS:B<x>:SMBUS:DATA:THReshold command.

Description

This command sets or queries the SMBUS data source threshold for the specified bus.

Usage

Using the .query() method will send the BUS:B<x>:SMBUS:DATA:THReshold? query.
Using the .verify(value) method will send the BUS:B<x>:SMBUS:DATA:THReshold? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:SMBUS:DATA:THReshold value command.

SCPI Syntax

- BUS:B<x>:SMBUS:DATA:THReshold <NR3>
- BUS:B<x>:SMBUS:DATA:THReshold?

Info

B<x> is the bus number.
<NR3> specifies the SMBUS data threshold for the specified bus. The valid range is -8V to +8V.

BusBItemSmbusDataSource ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:SMBUS:DATA:SOUrce command.

Description

This command sets or queries the data source for the specified bus.

Usage

Using the .query() method will send the BUS:B<x>:SMBUS:DATA:SOUrce? query.
Using the .verify(value) method will send the BUS:B<x>:SMBUS:DATA:SOUrce? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:SMBUS:DATA:SOUrce value command.

SCPI Syntax

- BUS:B<x>:SMBUS:DATA:SOUrce {S<x>_Ch<x>|CH<x>|MATH<x>|REF<x>}
- BUS:B<x>:SMBUS:DATA:SOUrce?

Info

B<x> is the bus number.
S<x>_Ch<x> specifies the remote scope number and the analog channel.
CH<x> specifies an analog channel as the source for the data signal, where is the channel number.
MATH<x> specifies a math channel as the source for the data signal, where is the math waveform number.
REF<x> specifies a reference waveform as the source for the data signal, where is the reference waveform number.

BusBItemSmbusDataThreshold ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:SMBUS:DATA:THReshold command.

Description

This command sets or queries the SMBUS data source threshold for the specified bus.

Usage

Using the .query() method will send the BUS:B<x>:SMBUS:DATA:THReshold? query.
Using the .verify(value) method will send the BUS:B<x>:SMBUS:DATA:THReshold? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:SMBUS:DATA:THReshold value command.

SCPI Syntax

- BUS:B<x>:SMBUS:DATA:THReshold <NR3>
- BUS:B<x>:SMBUS:DATA:THReshold?

Info

B<x> is the bus number.
<NR3> specifies the SMBUS data threshold for the specified bus. The valid range is -8V to +8V.

BusBItemSmbusPec ¶

Bases: SCPICmdRead

The BUS:B<x>:SMBUS:PEC command tree.

Usage

Using the .query() method will send the BUS:B<x>:SMBUS:PEC? query.
Using the .verify(value) method will send the BUS:B<x>:SMBUS:PEC? query and raise an AssertionError if the returned value does not match value.

Info

B<x> is the bus number.

Properties

.value: The BUS:B<x>:SMBUS:PEC:VALUe command.

value `property` ¶

value: BusBItemSmbusPecValue

Return the BUS:B<x>:SMBUS:PEC:VALUe command.

Description

This command sets or queries the SMBus PEC selection for the specified bus.

Usage

Using the .query() method will send the BUS:B<x>:SMBUS:PEC:VALUe? query.
Using the .verify(value) method will send the BUS:B<x>:SMBUS:PEC:VALUe? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:SMBUS:PEC:VALUe value command.

SCPI Syntax

- BUS:B<x>:SMBUS:PEC:VALUe {TRUe|FALSe}
- BUS:B<x>:SMBUS:PEC:VALUe?

Info

B<x> is the bus number.
TRUe specifies the SMBus PEC selection as true.
FALSe specifies the SMBus PEC selection as false.

BusBItemSmbusPecValue ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:SMBUS:PEC:VALUe command.

Description

This command sets or queries the SMBus PEC selection for the specified bus.

Usage

Using the .query() method will send the BUS:B<x>:SMBUS:PEC:VALUe? query.
Using the .verify(value) method will send the BUS:B<x>:SMBUS:PEC:VALUe? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:SMBUS:PEC:VALUe value command.

SCPI Syntax

- BUS:B<x>:SMBUS:PEC:VALUe {TRUe|FALSe}
- BUS:B<x>:SMBUS:PEC:VALUe?

Info

B<x> is the bus number.
TRUe specifies the SMBus PEC selection as true.
FALSe specifies the SMBus PEC selection as false.

BusBItemSpacewire ¶

Bases: SCPICmdRead

The BUS:B<x>:SPACEWIRe command tree.

Usage

Using the .query() method will send the BUS:B<x>:SPACEWIRe? query.
Using the .verify(value) method will send the BUS:B<x>:SPACEWIRe? query and raise an AssertionError if the returned value does not match value.

Info

B<x> is the bus number.

Properties

.bitrate: The BUS:B<x>:SPACEWIRe:BITRate command.
.data: The BUS:B<x>:SPACEWIRe:DATa command tree.
.decode: The BUS:B<x>:SPACEWIRe:DECode command tree.
.strobe: The BUS:B<x>:SPACEWIRe:STRobe command tree.
.sync: The BUS:B<x>:SPACEWIRe:SYNC command.

bitrate `property` ¶

bitrate: BusBItemSpacewireBitrate

Return the BUS:B<x>:SPACEWIRe:BITRate command.

Description

This command sets or queries the SpaceWire bit rate.

Usage

Using the .query() method will send the BUS:B<x>:SPACEWIRe:BITRate? query.
Using the .verify(value) method will send the BUS:B<x>:SPACEWIRe:BITRate? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:SPACEWIRe:BITRate value command.

SCPI Syntax

- BUS:B<x>:SPACEWIRe:BITRate <NR3>
- BUS:B<x>:SPACEWIRe:BITRate?

Info

B<x> is the bus number.
NR3 specifies the SpaceWire bit rate for the specified bus. The valid bit rate range is 2 Mbps to 200 Mbps. The default value is 10 Mbps.

data `property` ¶

data: BusBItemSpacewireData

Return the BUS:B<x>:SPACEWIRe:DATa command tree.

Usage

Using the .query() method will send the BUS:B<x>:SPACEWIRe:DATa? query.
Using the .verify(value) method will send the BUS:B<x>:SPACEWIRe:DATa? query and raise an AssertionError if the returned value does not match value.

Info

B<x> is the bus number.

Sub-properties

.source: The BUS:B<x>:SPACEWIRe:DATa:SOUrce command.
.threshold: The BUS:B<x>:SPACEWIRe:DATa:THReshold command.

decode `property` ¶

decode: BusBItemSpacewireDecode

Return the BUS:B<x>:SPACEWIRe:DECode command tree.

Usage

Using the .query() method will send the BUS:B<x>:SPACEWIRe:DECode? query.
Using the .verify(value) method will send the BUS:B<x>:SPACEWIRe:DECode? query and raise an AssertionError if the returned value does not match value.

Info

B<x> is the bus number.

Sub-properties

.type: The BUS:B<x>:SPACEWIRe:DECode:TYPe command.

strobe `property` ¶

strobe: BusBItemSpacewireStrobe

Return the BUS:B<x>:SPACEWIRe:STRobe command tree.

Usage

Using the .query() method will send the BUS:B<x>:SPACEWIRe:STRobe? query.
Using the .verify(value) method will send the BUS:B<x>:SPACEWIRe:STRobe? query and raise an AssertionError if the returned value does not match value.

Info

B<x> is the bus number.

Sub-properties

.source: The BUS:B<x>:SPACEWIRe:STRobe:SOUrce command.
.threshold: The BUS:B<x>:SPACEWIRe:STRobe:THReshold command.

sync `property` ¶

sync: BusBItemSpacewireSync

Return the BUS:B<x>:SPACEWIRe:SYNC command.

Description

This command sets or queries sync for SpaceWire decoding.

Usage

Using the .query() method will send the BUS:B<x>:SPACEWIRe:SYNC? query.
Using the .verify(value) method will send the BUS:B<x>:SPACEWIRe:SYNC? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:SPACEWIRe:SYNC value command.

SCPI Syntax

- BUS:B<x>:SPACEWIRe:SYNC {DATA|NULL|AUTO|CUSTom}
- BUS:B<x>:SPACEWIRe:SYNC?

Info

B<x> is the bus number.
DATA specifies sync as data.
NULL specifies sync as null.
AUTO specifies sync as auto.
CUSTom specifies sync as custom.

Sub-properties

.count: The BUS:B<x>:SPACEWIRe:SYNC:COUnt command.
.pattern: The BUS:B<x>:SPACEWIRe:SYNC:PATTern command.
.value: The BUS:B<x>:SPACEWIRe:SYNC:VALUe command.

BusBItemSpacewireBitrate ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:SPACEWIRe:BITRate command.

Description

This command sets or queries the SpaceWire bit rate.

Usage

Using the .query() method will send the BUS:B<x>:SPACEWIRe:BITRate? query.
Using the .verify(value) method will send the BUS:B<x>:SPACEWIRe:BITRate? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:SPACEWIRe:BITRate value command.

SCPI Syntax

- BUS:B<x>:SPACEWIRe:BITRate <NR3>
- BUS:B<x>:SPACEWIRe:BITRate?

Info

B<x> is the bus number.
NR3 specifies the SpaceWire bit rate for the specified bus. The valid bit rate range is 2 Mbps to 200 Mbps. The default value is 10 Mbps.

BusBItemSpacewireData ¶

Bases: SCPICmdRead

The BUS:B<x>:SPACEWIRe:DATa command tree.

Usage

Using the .query() method will send the BUS:B<x>:SPACEWIRe:DATa? query.
Using the .verify(value) method will send the BUS:B<x>:SPACEWIRe:DATa? query and raise an AssertionError if the returned value does not match value.

Info

B<x> is the bus number.

Properties

.source: The BUS:B<x>:SPACEWIRe:DATa:SOUrce command.
.threshold: The BUS:B<x>:SPACEWIRe:DATa:THReshold command.

source `property` ¶

source: BusBItemSpacewireDataSource

Return the BUS:B<x>:SPACEWIRe:DATa:SOUrce command.

Description

This command sets or queries the source of the SpaceWire Data signal for the specified bus.

Usage

Using the .query() method will send the BUS:B<x>:SPACEWIRe:DATa:SOUrce? query.
Using the .verify(value) method will send the BUS:B<x>:SPACEWIRe:DATa:SOUrce? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:SPACEWIRe:DATa:SOUrce value command.

SCPI Syntax

- BUS:B<x>:SPACEWIRe:DATa:SOUrce {S<x>_Ch<x>|CH<x>|MATH<x>|REF<x>}
- BUS:B<x>:SPACEWIRe:DATa:SOUrce?

Info

B<x> is the bus number.
S<x>_Ch<x> specifies the remote scope number and the analog channel.
CH<x> specifies an analog channel as the source for the data signal, where is the channel number.
MATH<x> specifies a math channel as the source for the data signal, where is the math waveform number.
REF<x> specifies a reference waveform as the source for the data signal, where is the reference waveform number.

threshold `property` ¶

threshold: BusBItemSpacewireDataThreshold

Return the BUS:B<x>:SPACEWIRe:DATa:THReshold command.

Description

This command sets or queries the threshold of the SpaceWire Data signal for the specified bus.

Usage

Using the .query() method will send the BUS:B<x>:SPACEWIRe:DATa:THReshold? query.
Using the .verify(value) method will send the BUS:B<x>:SPACEWIRe:DATa:THReshold? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:SPACEWIRe:DATa:THReshold value command.

SCPI Syntax

- BUS:B<x>:SPACEWIRe:DATa:THReshold <NR3>
- BUS:B<x>:SPACEWIRe:DATa:THReshold?

Info

B<x> is the bus number.
NR3 specifies the SpaceWire Data threshold level for the specified bus, in volts.

BusBItemSpacewireDataSource ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:SPACEWIRe:DATa:SOUrce command.

Description

This command sets or queries the source of the SpaceWire Data signal for the specified bus.

Usage

Using the .query() method will send the BUS:B<x>:SPACEWIRe:DATa:SOUrce? query.
Using the .verify(value) method will send the BUS:B<x>:SPACEWIRe:DATa:SOUrce? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:SPACEWIRe:DATa:SOUrce value command.

SCPI Syntax

- BUS:B<x>:SPACEWIRe:DATa:SOUrce {S<x>_Ch<x>|CH<x>|MATH<x>|REF<x>}
- BUS:B<x>:SPACEWIRe:DATa:SOUrce?

Info

B<x> is the bus number.
S<x>_Ch<x> specifies the remote scope number and the analog channel.
CH<x> specifies an analog channel as the source for the data signal, where is the channel number.
MATH<x> specifies a math channel as the source for the data signal, where is the math waveform number.
REF<x> specifies a reference waveform as the source for the data signal, where is the reference waveform number.

BusBItemSpacewireDataThreshold ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:SPACEWIRe:DATa:THReshold command.

Description

This command sets or queries the threshold of the SpaceWire Data signal for the specified bus.

Usage

Using the .query() method will send the BUS:B<x>:SPACEWIRe:DATa:THReshold? query.
Using the .verify(value) method will send the BUS:B<x>:SPACEWIRe:DATa:THReshold? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:SPACEWIRe:DATa:THReshold value command.

SCPI Syntax

- BUS:B<x>:SPACEWIRe:DATa:THReshold <NR3>
- BUS:B<x>:SPACEWIRe:DATa:THReshold?

Info

B<x> is the bus number.
NR3 specifies the SpaceWire Data threshold level for the specified bus, in volts.

BusBItemSpacewireDecode ¶

Bases: SCPICmdRead

The BUS:B<x>:SPACEWIRe:DECode command tree.

Usage

Using the .query() method will send the BUS:B<x>:SPACEWIRe:DECode? query.
Using the .verify(value) method will send the BUS:B<x>:SPACEWIRe:DECode? query and raise an AssertionError if the returned value does not match value.

Info

B<x> is the bus number.

Properties

.type: The BUS:B<x>:SPACEWIRe:DECode:TYPe command.

type `property` ¶

type: BusBItemSpacewireDecodeType

Return the BUS:B<x>:SPACEWIRe:DECode:TYPe command.

Description

This command sets or queries the decode type for SpaceWire bus decode.

Usage

Using the .query() method will send the BUS:B<x>:SPACEWIRe:DECode:TYPe? query.
Using the .verify(value) method will send the BUS:B<x>:SPACEWIRe:DECode:TYPe? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:SPACEWIRe:DECode:TYPe value command.

SCPI Syntax

- BUS:B<x>:SPACEWIRe:DECode:TYPe {STRObe|DATARate}
- BUS:B<x>:SPACEWIRe:DECode:TYPe?

Info

B<x> is the bus number.
STRObe specifies the decode type as strobe.
DATARate specifies the decode type as data rate.

BusBItemSpacewireDecodeType ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:SPACEWIRe:DECode:TYPe command.

Description

This command sets or queries the decode type for SpaceWire bus decode.

Usage

Using the .query() method will send the BUS:B<x>:SPACEWIRe:DECode:TYPe? query.
Using the .verify(value) method will send the BUS:B<x>:SPACEWIRe:DECode:TYPe? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:SPACEWIRe:DECode:TYPe value command.

SCPI Syntax

- BUS:B<x>:SPACEWIRe:DECode:TYPe {STRObe|DATARate}
- BUS:B<x>:SPACEWIRe:DECode:TYPe?

Info

B<x> is the bus number.
STRObe specifies the decode type as strobe.
DATARate specifies the decode type as data rate.

BusBItemSpacewireStrobe ¶

Bases: SCPICmdRead

The BUS:B<x>:SPACEWIRe:STRobe command tree.

Usage

Using the .query() method will send the BUS:B<x>:SPACEWIRe:STRobe? query.
Using the .verify(value) method will send the BUS:B<x>:SPACEWIRe:STRobe? query and raise an AssertionError if the returned value does not match value.

Info

B<x> is the bus number.

Properties

.source: The BUS:B<x>:SPACEWIRe:STRobe:SOUrce command.
.threshold: The BUS:B<x>:SPACEWIRe:STRobe:THReshold command.

source `property` ¶

source: BusBItemSpacewireStrobeSource

Return the BUS:B<x>:SPACEWIRe:STRobe:SOUrce command.

Description

This command sets or queries the source of the SpaceWire Strobe signal for the specified bus.

Usage

Using the .query() method will send the BUS:B<x>:SPACEWIRe:STRobe:SOUrce? query.
Using the .verify(value) method will send the BUS:B<x>:SPACEWIRe:STRobe:SOUrce? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:SPACEWIRe:STRobe:SOUrce value command.

SCPI Syntax

- BUS:B<x>:SPACEWIRe:STRobe:SOUrce {S<x>_Ch<x>|CH<x>|MATH<x>|REF<x>}
- BUS:B<x>:SPACEWIRe:STRobe:SOUrce?

Info

B<x> is the bus number.
S<x>_Ch<x> specifies the remote scope number and the analog channel.
CH<x> specifies an analog channel as the source for the strobe signal, where is the channel number.
MATH<x> specifies a math channel as the source for the strobe signal, where is the math waveform number.
REF<x> specifies a reference waveform as the source for the strobe signal, where is the reference waveform number.

threshold `property` ¶

threshold: BusBItemSpacewireStrobeThreshold

Return the BUS:B<x>:SPACEWIRe:STRobe:THReshold command.

Description

This command sets or queries the threshold level of the SpaceWire Strobe signal for the specified bus.

Usage

Using the .query() method will send the BUS:B<x>:SPACEWIRe:STRobe:THReshold? query.
Using the .verify(value) method will send the BUS:B<x>:SPACEWIRe:STRobe:THReshold? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:SPACEWIRe:STRobe:THReshold value command.

SCPI Syntax

- BUS:B<x>:SPACEWIRe:STRobe:THReshold <NR3>
- BUS:B<x>:SPACEWIRe:STRobe:THReshold?

Info

B<x> is the bus number.
NR3 specifies the SpaceWire Strobe signal threshold level for the specified bus, in volts.

BusBItemSpacewireStrobeSource ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:SPACEWIRe:STRobe:SOUrce command.

Description

This command sets or queries the source of the SpaceWire Strobe signal for the specified bus.

Usage

Using the .query() method will send the BUS:B<x>:SPACEWIRe:STRobe:SOUrce? query.
Using the .verify(value) method will send the BUS:B<x>:SPACEWIRe:STRobe:SOUrce? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:SPACEWIRe:STRobe:SOUrce value command.

SCPI Syntax

- BUS:B<x>:SPACEWIRe:STRobe:SOUrce {S<x>_Ch<x>|CH<x>|MATH<x>|REF<x>}
- BUS:B<x>:SPACEWIRe:STRobe:SOUrce?

Info

B<x> is the bus number.
S<x>_Ch<x> specifies the remote scope number and the analog channel.
CH<x> specifies an analog channel as the source for the strobe signal, where is the channel number.
MATH<x> specifies a math channel as the source for the strobe signal, where is the math waveform number.
REF<x> specifies a reference waveform as the source for the strobe signal, where is the reference waveform number.

BusBItemSpacewireStrobeThreshold ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:SPACEWIRe:STRobe:THReshold command.

Description

This command sets or queries the threshold level of the SpaceWire Strobe signal for the specified bus.

Usage

Using the .query() method will send the BUS:B<x>:SPACEWIRe:STRobe:THReshold? query.
Using the .verify(value) method will send the BUS:B<x>:SPACEWIRe:STRobe:THReshold? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:SPACEWIRe:STRobe:THReshold value command.

SCPI Syntax

- BUS:B<x>:SPACEWIRe:STRobe:THReshold <NR3>
- BUS:B<x>:SPACEWIRe:STRobe:THReshold?

Info

B<x> is the bus number.
NR3 specifies the SpaceWire Strobe signal threshold level for the specified bus, in volts.

BusBItemSpacewireSync ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:SPACEWIRe:SYNC command.

Description

This command sets or queries sync for SpaceWire decoding.

Usage

Using the .query() method will send the BUS:B<x>:SPACEWIRe:SYNC? query.
Using the .verify(value) method will send the BUS:B<x>:SPACEWIRe:SYNC? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:SPACEWIRe:SYNC value command.

SCPI Syntax

- BUS:B<x>:SPACEWIRe:SYNC {DATA|NULL|AUTO|CUSTom}
- BUS:B<x>:SPACEWIRe:SYNC?

Info

B<x> is the bus number.
DATA specifies sync as data.
NULL specifies sync as null.
AUTO specifies sync as auto.
CUSTom specifies sync as custom.

Properties

.count: The BUS:B<x>:SPACEWIRe:SYNC:COUnt command.
.pattern: The BUS:B<x>:SPACEWIRe:SYNC:PATTern command.
.value: The BUS:B<x>:SPACEWIRe:SYNC:VALUe command.

count `property` ¶

count: BusBItemSpacewireSyncCount

Return the BUS:B<x>:SPACEWIRe:SYNC:COUnt command.

Description

This command sets or queries the length of the data string in bytes to be used for a SpaceWire sync bytes.

Usage

Using the .query() method will send the BUS:B<x>:SPACEWIRe:SYNC:COUnt? query.
Using the .verify(value) method will send the BUS:B<x>:SPACEWIRe:SYNC:COUnt? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:SPACEWIRe:SYNC:COUnt value command.

SCPI Syntax

- BUS:B<x>:SPACEWIRe:SYNC:COUnt <NR1>
- BUS:B<x>:SPACEWIRe:SYNC:COUnt?

Info

B<x> is the bus number.
NR1 specifies the length of the data string in bytes. The mininum is 2 and the maximum is 10. The default is 2 bytes.

pattern `property` ¶

pattern: BusBItemSpacewireSyncPattern

Return the BUS:B<x>:SPACEWIRe:SYNC:PATTern command.

Description

This command sets or queries sync pattern for SpaceWire decoding.

Usage

Using the .query() method will send the BUS:B<x>:SPACEWIRe:SYNC:PATTern? query.
Using the .verify(value) method will send the BUS:B<x>:SPACEWIRe:SYNC:PATTern? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:SPACEWIRe:SYNC:PATTern value command.

SCPI Syntax

- BUS:B<x>:SPACEWIRe:SYNC:PATTern <NR3>
- BUS:B<x>:SPACEWIRe:SYNC:PATTern?

Info

B<x> is the bus number.
NR3 specifies the sync pattern.

value `property` ¶

value: BusBItemSpacewireSyncValue

Return the BUS:B<x>:SPACEWIRe:SYNC:VALUe command.

Description

This command sets or queries sync value for sync option data.

Usage

Using the .query() method will send the BUS:B<x>:SPACEWIRe:SYNC:VALUe? query.
Using the .verify(value) method will send the BUS:B<x>:SPACEWIRe:SYNC:VALUe? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:SPACEWIRe:SYNC:VALUe value command.

SCPI Syntax

- BUS:B<x>:SPACEWIRe:SYNC:VALUe <NR3>
- BUS:B<x>:SPACEWIRe:SYNC:VALUe?

Info

B<x> is the bus number.
NR3 specifies the sync value for sync option data.

BusBItemSpacewireSyncCount ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:SPACEWIRe:SYNC:COUnt command.

Description

This command sets or queries the length of the data string in bytes to be used for a SpaceWire sync bytes.

Usage

Using the .query() method will send the BUS:B<x>:SPACEWIRe:SYNC:COUnt? query.
Using the .verify(value) method will send the BUS:B<x>:SPACEWIRe:SYNC:COUnt? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:SPACEWIRe:SYNC:COUnt value command.

SCPI Syntax

- BUS:B<x>:SPACEWIRe:SYNC:COUnt <NR1>
- BUS:B<x>:SPACEWIRe:SYNC:COUnt?

Info

B<x> is the bus number.
NR1 specifies the length of the data string in bytes. The mininum is 2 and the maximum is 10. The default is 2 bytes.

BusBItemSpacewireSyncPattern ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:SPACEWIRe:SYNC:PATTern command.

Description

This command sets or queries sync pattern for SpaceWire decoding.

Usage

Using the .query() method will send the BUS:B<x>:SPACEWIRe:SYNC:PATTern? query.
Using the .verify(value) method will send the BUS:B<x>:SPACEWIRe:SYNC:PATTern? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:SPACEWIRe:SYNC:PATTern value command.

SCPI Syntax

- BUS:B<x>:SPACEWIRe:SYNC:PATTern <NR3>
- BUS:B<x>:SPACEWIRe:SYNC:PATTern?

Info

B<x> is the bus number.
NR3 specifies the sync pattern.

BusBItemSpacewireSyncValue ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:SPACEWIRe:SYNC:VALUe command.

Description

This command sets or queries sync value for sync option data.

Usage

Using the .query() method will send the BUS:B<x>:SPACEWIRe:SYNC:VALUe? query.
Using the .verify(value) method will send the BUS:B<x>:SPACEWIRe:SYNC:VALUe? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:SPACEWIRe:SYNC:VALUe value command.

SCPI Syntax

- BUS:B<x>:SPACEWIRe:SYNC:VALUe <NR3>
- BUS:B<x>:SPACEWIRe:SYNC:VALUe?

Info

B<x> is the bus number.
NR3 specifies the sync value for sync option data.

BusBItemSpi ¶

Bases: SCPICmdRead

The BUS:B<x>:SPI command tree.

Usage

Using the .query() method will send the BUS:B<x>:SPI? query.
Using the .verify(value) method will send the BUS:B<x>:SPI? query and raise an AssertionError if the returned value does not match value.

Info

B<x> is the number of the bus waveform.

Properties

.bitorder: The BUS:B<x>:SPI:BITOrder command.
.clock: The BUS:B<x>:SPI:CLOCk command tree.
.data: The BUS:B<x>:SPI:DATa command tree.
.framing: The BUS:B<x>:SPI:FRAMING command.
.idletime: The BUS:B<x>:SPI:IDLETime command.
.miso: The BUS:B<x>:SPI:MISo command tree.
.mosi: The BUS:B<x>:SPI:MOSi command tree.
.number: The BUS:B<x>:SPI:NUMBer command tree.
.select: The BUS:B<x>:SPI:SELect command tree.

bitorder `property` ¶

bitorder: BusBItemSpiBitorder

Return the BUS:B<x>:SPI:BITOrder command.

Description

This command sets or queries the SPI bit order for the specified bus. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:SPI:BITOrder? query.
Using the .verify(value) method will send the BUS:B<x>:SPI:BITOrder? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:SPI:BITOrder value command.

SCPI Syntax

- BUS:B<x>:SPI:BITOrder {LSB|MSB}
- BUS:B<x>:SPI:BITOrder?

Info

B<x> is the number of the bus waveform.
LSB specifies that each bit becomes the recovered value’s new LSB, after shifting previously recovered bits one place to the left. The decoding happens right to left.
MSB specifies that each successive bit from the bus’s data line becomes the new MSB of the recovered value, shifting any previously recovered bits one place to the right. The decoding happens left to right.

clock `property` ¶

clock: BusBItemSpiClock

Return the BUS:B<x>:SPI:CLOCk command tree.

Usage

Using the .query() method will send the BUS:B<x>:SPI:CLOCk? query.
Using the .verify(value) method will send the BUS:B<x>:SPI:CLOCk? query and raise an AssertionError if the returned value does not match value.

Info

B<x> is the number of the bus waveform.

Sub-properties

.polarity: The BUS:B<x>:SPI:CLOCk:POLarity command.
.source: The BUS:B<x>:SPI:CLOCk:SOUrce command.
.threshold: The BUS:B<x>:SPI:CLOCk:THReshold command.

data `property` ¶

data: BusBItemSpiData

Return the BUS:B<x>:SPI:DATa command tree.

Usage

Using the .query() method will send the BUS:B<x>:SPI:DATa? query.
Using the .verify(value) method will send the BUS:B<x>:SPI:DATa? query and raise an AssertionError if the returned value does not match value.

Info

B<x> is the number of the bus waveform.

Sub-properties

.polarity: The BUS:B<x>:SPI:DATa:POLarity command.
.size: The BUS:B<x>:SPI:DATa:SIZe command.
.source: The BUS:B<x>:SPI:DATa:SOUrce command.
.threshold: The BUS:B<x>:SPI:DATa:THReshold command.

framing `property` ¶

framing: BusBItemSpiFraming

Return the BUS:B<x>:SPI:FRAMING command.

Description

This command sets or queries the SPI framing setting for the specified bus. The bus number is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:SPI:FRAMING? query.
Using the .verify(value) method will send the BUS:B<x>:SPI:FRAMING? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:SPI:FRAMING value command.

SCPI Syntax

- BUS:B<x>:SPI:FRAMING {IDLE|SS}
- BUS:B<x>:SPI:FRAMING?

Info

B<x> is the number of the bus waveform.
IDLE specifies IDLE SPI framing.
SS specifies SS SPI framing.

idletime `property` ¶

idletime: BusBItemSpiIdletime

Return the BUS:B<x>:SPI:IDLETime command.

Description

This command sets or queries the SPI idle time for the specified bus. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:SPI:IDLETime? query.
Using the .verify(value) method will send the BUS:B<x>:SPI:IDLETime? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:SPI:IDLETime value command.

SCPI Syntax

- BUS:B<x>:SPI:IDLETime <NR3>
- BUS:B<x>:SPI:IDLETime?

Info

B<x> is the number of the bus waveform.
<NR3> specifies the SPI idle time.

miso `property` ¶

miso: BusBItemSpiMiso

Return the BUS:B<x>:SPI:MISo command tree.

Usage

Using the .query() method will send the BUS:B<x>:SPI:MISo? query.
Using the .verify(value) method will send the BUS:B<x>:SPI:MISo? query and raise an AssertionError if the returned value does not match value.

Info

B<x> is the number of the bus waveform.

Sub-properties

.data: The BUS:B<x>:SPI:MISo:DATa command tree.
.input: The BUS:B<x>:SPI:MISo:INPut command.
.threshold: The BUS:B<x>:SPI:MISo:THReshold command.

mosi `property` ¶

mosi: BusBItemSpiMosi

Return the BUS:B<x>:SPI:MOSi command tree.

Usage

Using the .query() method will send the BUS:B<x>:SPI:MOSi? query.
Using the .verify(value) method will send the BUS:B<x>:SPI:MOSi? query and raise an AssertionError if the returned value does not match value.

Info

B<x> is the number of the bus waveform.

Sub-properties

.data: The BUS:B<x>:SPI:MOSi:DATa command tree.
.input: The BUS:B<x>:SPI:MOSi:INPut command.
.threshold: The BUS:B<x>:SPI:MOSi:THReshold command.

number `property` ¶

number: BusBItemSpiNumber

Return the BUS:B<x>:SPI:NUMBer command tree.

Usage

Using the .query() method will send the BUS:B<x>:SPI:NUMBer? query.
Using the .verify(value) method will send the BUS:B<x>:SPI:NUMBer? query and raise an AssertionError if the returned value does not match value.

Info

B<x> is the number of the bus waveform.

Sub-properties

.inputs: The BUS:B<x>:SPI:NUMBer:INputs command.

select `property` ¶

select: BusBItemSpiSelect

Return the BUS:B<x>:SPI:SELect command tree.

Usage

Using the .query() method will send the BUS:B<x>:SPI:SELect? query.
Using the .verify(value) method will send the BUS:B<x>:SPI:SELect? query and raise an AssertionError if the returned value does not match value.

Info

B<x> is the number of the bus waveform.

Sub-properties

.polarity: The BUS:B<x>:SPI:SELect:POLarity command.
.source: The BUS:B<x>:SPI:SELect:SOUrce command.
.threshold: The BUS:B<x>:SPI:SELect:THReshold command.

BusBItemSpiBitorder ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:SPI:BITOrder command.

Description

This command sets or queries the SPI bit order for the specified bus. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:SPI:BITOrder? query.
Using the .verify(value) method will send the BUS:B<x>:SPI:BITOrder? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:SPI:BITOrder value command.

SCPI Syntax

- BUS:B<x>:SPI:BITOrder {LSB|MSB}
- BUS:B<x>:SPI:BITOrder?

Info

B<x> is the number of the bus waveform.
LSB specifies that each bit becomes the recovered value’s new LSB, after shifting previously recovered bits one place to the left. The decoding happens right to left.
MSB specifies that each successive bit from the bus’s data line becomes the new MSB of the recovered value, shifting any previously recovered bits one place to the right. The decoding happens left to right.

BusBItemSpiClock ¶

Bases: SCPICmdRead

The BUS:B<x>:SPI:CLOCk command tree.

Usage

Using the .query() method will send the BUS:B<x>:SPI:CLOCk? query.
Using the .verify(value) method will send the BUS:B<x>:SPI:CLOCk? query and raise an AssertionError if the returned value does not match value.

Info

B<x> is the number of the bus waveform.

Properties

.polarity: The BUS:B<x>:SPI:CLOCk:POLarity command.
.source: The BUS:B<x>:SPI:CLOCk:SOUrce command.
.threshold: The BUS:B<x>:SPI:CLOCk:THReshold command.

polarity `property` ¶

polarity: BusBItemSpiClockPolarity

Return the BUS:B<x>:SPI:CLOCk:POLarity command.

Description

This command sets or queries the SPI clock (SCLK) source polarity for the specified bus. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:SPI:CLOCk:POLarity? query.
Using the .verify(value) method will send the BUS:B<x>:SPI:CLOCk:POLarity? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:SPI:CLOCk:POLarity value command.

SCPI Syntax

- BUS:B<x>:SPI:CLOCk:POLarity {FALL|RISE}
- BUS:B<x>:SPI:CLOCk:POLarity?

Info

B<x> is the number of the bus waveform.
FALL sets the clock to the falling edge of the signal.
RISE sets the clock to the rising edge of the signal.

source `property` ¶

source: BusBItemSpiClockSource

Return the BUS:B<x>:SPI:CLOCk:SOUrce command.

Description

This command sets or queries the SPI clock (SCLK) source for the specified bus. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:SPI:CLOCk:SOUrce? query.
Using the .verify(value) method will send the BUS:B<x>:SPI:CLOCk:SOUrce? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:SPI:CLOCk:SOUrce value command.

SCPI Syntax

- BUS:B<x>:SPI:CLOCk:SOUrce {S<x>_Ch<x>_D<x>|CH<x>|CH<x>_D<x>|MATH<x>|REF<x>|REF<x>_D<x>}
- BUS:B<x>:SPI:CLOCk:SOUrce?

Info

B<x> is the number of the bus waveform.
S<x>_Ch<x>_D<x> specifies is the remote scope number, the analog channel and the digital channel.
CH<x> designates an analog channel as the bus SPI clock source.
CH<x>_D<x> designates an digital channel as the bus SPI clock source.
MATH<x> designates a math waveform as the clock source.
REF<x> designates a reference waveform as the clock source.
REF<x>_D<x> specifies a digital reference waveform as the clock source waveform for the specified SPI bus.

threshold `property` ¶

threshold: BusBItemSpiClockThreshold

Return the BUS:B<x>:SPI:CLOCk:THReshold command.

Description

This command sets or queries the SPI Clock (SCLK) source threshold for the specified bus. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:SPI:CLOCk:THReshold? query.
Using the .verify(value) method will send the BUS:B<x>:SPI:CLOCk:THReshold? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:SPI:CLOCk:THReshold value command.

SCPI Syntax

- BUS:B<x>:SPI:CLOCk:THReshold <NR3>
- BUS:B<x>:SPI:CLOCk:THReshold?

Info

B<x> is the number of the bus waveform.
<NR3> is the SPI Clock (SCLK) source threshold for the specified bus.

BusBItemSpiClockPolarity ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:SPI:CLOCk:POLarity command.

Description

This command sets or queries the SPI clock (SCLK) source polarity for the specified bus. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:SPI:CLOCk:POLarity? query.
Using the .verify(value) method will send the BUS:B<x>:SPI:CLOCk:POLarity? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:SPI:CLOCk:POLarity value command.

SCPI Syntax

- BUS:B<x>:SPI:CLOCk:POLarity {FALL|RISE}
- BUS:B<x>:SPI:CLOCk:POLarity?

Info

B<x> is the number of the bus waveform.
FALL sets the clock to the falling edge of the signal.
RISE sets the clock to the rising edge of the signal.

BusBItemSpiClockSource ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:SPI:CLOCk:SOUrce command.

Description

This command sets or queries the SPI clock (SCLK) source for the specified bus. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:SPI:CLOCk:SOUrce? query.
Using the .verify(value) method will send the BUS:B<x>:SPI:CLOCk:SOUrce? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:SPI:CLOCk:SOUrce value command.

SCPI Syntax

- BUS:B<x>:SPI:CLOCk:SOUrce {S<x>_Ch<x>_D<x>|CH<x>|CH<x>_D<x>|MATH<x>|REF<x>|REF<x>_D<x>}
- BUS:B<x>:SPI:CLOCk:SOUrce?

Info

B<x> is the number of the bus waveform.
S<x>_Ch<x>_D<x> specifies is the remote scope number, the analog channel and the digital channel.
CH<x> designates an analog channel as the bus SPI clock source.
CH<x>_D<x> designates an digital channel as the bus SPI clock source.
MATH<x> designates a math waveform as the clock source.
REF<x> designates a reference waveform as the clock source.
REF<x>_D<x> specifies a digital reference waveform as the clock source waveform for the specified SPI bus.

BusBItemSpiClockThreshold ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:SPI:CLOCk:THReshold command.

Description

This command sets or queries the SPI Clock (SCLK) source threshold for the specified bus. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:SPI:CLOCk:THReshold? query.
Using the .verify(value) method will send the BUS:B<x>:SPI:CLOCk:THReshold? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:SPI:CLOCk:THReshold value command.

SCPI Syntax

- BUS:B<x>:SPI:CLOCk:THReshold <NR3>
- BUS:B<x>:SPI:CLOCk:THReshold?

Info

B<x> is the number of the bus waveform.
<NR3> is the SPI Clock (SCLK) source threshold for the specified bus.

BusBItemSpiData ¶

Bases: SCPICmdRead

The BUS:B<x>:SPI:DATa command tree.

Usage

Using the .query() method will send the BUS:B<x>:SPI:DATa? query.
Using the .verify(value) method will send the BUS:B<x>:SPI:DATa? query and raise an AssertionError if the returned value does not match value.

Info

B<x> is the number of the bus waveform.

Properties

.polarity: The BUS:B<x>:SPI:DATa:POLarity command.
.size: The BUS:B<x>:SPI:DATa:SIZe command.
.source: The BUS:B<x>:SPI:DATa:SOUrce command.
.threshold: The BUS:B<x>:SPI:DATa:THReshold command.

polarity `property` ¶

polarity: BusBItemSpiDataPolarity

Return the BUS:B<x>:SPI:DATa:POLarity command.

Description

This command sets or queries the SPI Data (Data) source polarity for the bus number specified by x.

Usage

Using the .query() method will send the BUS:B<x>:SPI:DATa:POLarity? query.
Using the .verify(value) method will send the BUS:B<x>:SPI:DATa:POLarity? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:SPI:DATa:POLarity value command.

SCPI Syntax

- BUS:B<x>:SPI:DATa:POLarity {HIGH|LOW}
- BUS:B<x>:SPI:DATa:POLarity?

Info

B<x> is the number of the bus waveform.
HIGH sets the SPI data polarity to active high.
LOW sets the SPI data polarity to active low.

size `property` ¶

size: BusBItemSpiDataSize

Return the BUS:B<x>:SPI:DATa:SIZe command.

Description

This command sets or queries the number of bits per word for the specified SPI bus. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:SPI:DATa:SIZe? query.
Using the .verify(value) method will send the BUS:B<x>:SPI:DATa:SIZe? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:SPI:DATa:SIZe value command.

SCPI Syntax

- BUS:B<x>:SPI:DATa:SIZe <NR1>
- BUS:B<x>:SPI:DATa:SIZe?

Info

B<x> is the number of the bus waveform.
<NR1> is the data size for the specified bus. The minimum value is 2 and maximum is 32.

source `property` ¶

source: BusBItemSpiDataSource

Return the BUS:B<x>:SPI:DATa:SOUrce command.

Description

This command sets or queries the SPI Data (Data) source for the bus number specified by x.

Usage

Using the .query() method will send the BUS:B<x>:SPI:DATa:SOUrce? query.
Using the .verify(value) method will send the BUS:B<x>:SPI:DATa:SOUrce? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:SPI:DATa:SOUrce value command.

SCPI Syntax

- BUS:B<x>:SPI:DATa:SOUrce {S<x>_Ch<x>_D<x>|CH<x>|CH<x>_D<x>|MATH<x>|REF<x>|REF<x>_D<x>}
- BUS:B<x>:SPI:DATa:SOUrce?

Info

B<x> is the number of the bus waveform.
S<x>_Ch<x>_D<x> specifies is the remote scope number, the analog channel and the digital channel.
CH<x> designates an analog channel as the data source for the specified SPI bus.
CH<x>_D<x> designates an digital channel as the bus SPI clock source.
MATH<x> designates a math waveform as the data source.
REF<x> designates a reference waveform as the data source.
REF<x>_D<x> specifies a digital reference waveform as the data source waveform for the specified SPI bus.

threshold `property` ¶

threshold: BusBItemSpiDataThreshold

Return the BUS:B<x>:SPI:DATa:THReshold command.

Description

This command sets or queries the SPI Data (Data) source threshold for the specified bus. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:SPI:DATa:THReshold? query.
Using the .verify(value) method will send the BUS:B<x>:SPI:DATa:THReshold? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:SPI:DATa:THReshold value command.

SCPI Syntax

- BUS:B<x>:SPI:DATa:THReshold <NR3>
- BUS:B<x>:SPI:DATa:THReshold?

Info

B<x> is the number of the bus waveform.
<NR3> is the SPI Data (SDA) source threshold for the specified bus.

BusBItemSpiDataPolarity ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:SPI:DATa:POLarity command.

Description

This command sets or queries the SPI Data (Data) source polarity for the bus number specified by x.

Usage

Using the .query() method will send the BUS:B<x>:SPI:DATa:POLarity? query.
Using the .verify(value) method will send the BUS:B<x>:SPI:DATa:POLarity? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:SPI:DATa:POLarity value command.

SCPI Syntax

- BUS:B<x>:SPI:DATa:POLarity {HIGH|LOW}
- BUS:B<x>:SPI:DATa:POLarity?

Info

B<x> is the number of the bus waveform.
HIGH sets the SPI data polarity to active high.
LOW sets the SPI data polarity to active low.

BusBItemSpiDataSize ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:SPI:DATa:SIZe command.

Description

This command sets or queries the number of bits per word for the specified SPI bus. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:SPI:DATa:SIZe? query.
Using the .verify(value) method will send the BUS:B<x>:SPI:DATa:SIZe? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:SPI:DATa:SIZe value command.

SCPI Syntax

- BUS:B<x>:SPI:DATa:SIZe <NR1>
- BUS:B<x>:SPI:DATa:SIZe?

Info

B<x> is the number of the bus waveform.
<NR1> is the data size for the specified bus. The minimum value is 2 and maximum is 32.

BusBItemSpiDataSource ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:SPI:DATa:SOUrce command.

Description

This command sets or queries the SPI Data (Data) source for the bus number specified by x.

Usage

Using the .query() method will send the BUS:B<x>:SPI:DATa:SOUrce? query.
Using the .verify(value) method will send the BUS:B<x>:SPI:DATa:SOUrce? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:SPI:DATa:SOUrce value command.

SCPI Syntax

- BUS:B<x>:SPI:DATa:SOUrce {S<x>_Ch<x>_D<x>|CH<x>|CH<x>_D<x>|MATH<x>|REF<x>|REF<x>_D<x>}
- BUS:B<x>:SPI:DATa:SOUrce?

Info

B<x> is the number of the bus waveform.
S<x>_Ch<x>_D<x> specifies is the remote scope number, the analog channel and the digital channel.
CH<x> designates an analog channel as the data source for the specified SPI bus.
CH<x>_D<x> designates an digital channel as the bus SPI clock source.
MATH<x> designates a math waveform as the data source.
REF<x> designates a reference waveform as the data source.
REF<x>_D<x> specifies a digital reference waveform as the data source waveform for the specified SPI bus.

BusBItemSpiDataThreshold ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:SPI:DATa:THReshold command.

Description

This command sets or queries the SPI Data (Data) source threshold for the specified bus. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:SPI:DATa:THReshold? query.
Using the .verify(value) method will send the BUS:B<x>:SPI:DATa:THReshold? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:SPI:DATa:THReshold value command.

SCPI Syntax

- BUS:B<x>:SPI:DATa:THReshold <NR3>
- BUS:B<x>:SPI:DATa:THReshold?

Info

B<x> is the number of the bus waveform.
<NR3> is the SPI Data (SDA) source threshold for the specified bus.

BusBItemSpiFraming ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:SPI:FRAMING command.

Description

This command sets or queries the SPI framing setting for the specified bus. The bus number is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:SPI:FRAMING? query.
Using the .verify(value) method will send the BUS:B<x>:SPI:FRAMING? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:SPI:FRAMING value command.

SCPI Syntax

- BUS:B<x>:SPI:FRAMING {IDLE|SS}
- BUS:B<x>:SPI:FRAMING?

Info

B<x> is the number of the bus waveform.
IDLE specifies IDLE SPI framing.
SS specifies SS SPI framing.

BusBItemSpiIdletime ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:SPI:IDLETime command.

Description

This command sets or queries the SPI idle time for the specified bus. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:SPI:IDLETime? query.
Using the .verify(value) method will send the BUS:B<x>:SPI:IDLETime? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:SPI:IDLETime value command.

SCPI Syntax

- BUS:B<x>:SPI:IDLETime <NR3>
- BUS:B<x>:SPI:IDLETime?

Info

B<x> is the number of the bus waveform.
<NR3> specifies the SPI idle time.

BusBItemSpiMiso ¶

Bases: SCPICmdRead

The BUS:B<x>:SPI:MISo command tree.

Usage

Using the .query() method will send the BUS:B<x>:SPI:MISo? query.
Using the .verify(value) method will send the BUS:B<x>:SPI:MISo? query and raise an AssertionError if the returned value does not match value.

Info

B<x> is the number of the bus waveform.

Properties

.data: The BUS:B<x>:SPI:MISo:DATa command tree.
.input: The BUS:B<x>:SPI:MISo:INPut command.
.threshold: The BUS:B<x>:SPI:MISo:THReshold command.

data `property` ¶

data: BusBItemSpiMisoData

Return the BUS:B<x>:SPI:MISo:DATa command tree.

Usage

Using the .query() method will send the BUS:B<x>:SPI:MISo:DATa? query.
Using the .verify(value) method will send the BUS:B<x>:SPI:MISo:DATa? query and raise an AssertionError if the returned value does not match value.

Info

B<x> is the number of the bus waveform.

Sub-properties

.polarity: The BUS:B<x>:SPI:MISo:DATa:POLarity command.

input `property` ¶

input: BusBItemSpiMisoInput

Return the BUS:B<x>:SPI:MISo:INPut command.

Description

This command sets or queries the SPI MISo source for the specified bus. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:SPI:MISo:INPut? query.
Using the .verify(value) method will send the BUS:B<x>:SPI:MISo:INPut? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:SPI:MISo:INPut value command.

SCPI Syntax

- BUS:B<x>:SPI:MISo:INPut {S<x>_Ch<x>|CH<x>|MATH<x>|REF<x>}
- BUS:B<x>:SPI:MISo:INPut?

Info

B<x> is the number of the bus waveform.
S<x>_Ch<x> specifies the remote scope number and the analog channel.
CH<x> designates an analog channel as the source.
MATH<x> designates a math waveform as the source.
REF<x> designates a reference waveform as the source.

threshold `property` ¶

threshold: BusBItemSpiMisoThreshold

Return the BUS:B<x>:SPI:MISo:THReshold command.

Description

This command sets or queries the SPI MISo Data source threshold for the specified bus. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:SPI:MISo:THReshold? query.
Using the .verify(value) method will send the BUS:B<x>:SPI:MISo:THReshold? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:SPI:MISo:THReshold value command.

SCPI Syntax

- BUS:B<x>:SPI:MISo:THReshold <NR3>
- BUS:B<x>:SPI:MISo:THReshold?

Info

B<x> is the number of the bus waveform.
<NR3> is the SPI MISo Data source threshold for the specified bus.

BusBItemSpiMisoData ¶

Bases: SCPICmdRead

The BUS:B<x>:SPI:MISo:DATa command tree.

Usage

Using the .query() method will send the BUS:B<x>:SPI:MISo:DATa? query.
Using the .verify(value) method will send the BUS:B<x>:SPI:MISo:DATa? query and raise an AssertionError if the returned value does not match value.

Info

B<x> is the number of the bus waveform.

Properties

.polarity: The BUS:B<x>:SPI:MISo:DATa:POLarity command.

polarity `property` ¶

polarity: BusBItemSpiMisoDataPolarity

Return the BUS:B<x>:SPI:MISo:DATa:POLarity command.

Description

This command sets or queries the SPI MISo Data source polarity for the specified bus. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:SPI:MISo:DATa:POLarity? query.
Using the .verify(value) method will send the BUS:B<x>:SPI:MISo:DATa:POLarity? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:SPI:MISo:DATa:POLarity value command.

SCPI Syntax

- BUS:B<x>:SPI:MISo:DATa:POLarity {HIGH|LOW}
- BUS:B<x>:SPI:MISo:DATa:POLarity?

Info

B<x> is the number of the bus waveform.
HIGH sets the polarity to high.
LOW sets the polarity to low.

BusBItemSpiMisoDataPolarity ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:SPI:MISo:DATa:POLarity command.

Description

This command sets or queries the SPI MISo Data source polarity for the specified bus. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:SPI:MISo:DATa:POLarity? query.
Using the .verify(value) method will send the BUS:B<x>:SPI:MISo:DATa:POLarity? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:SPI:MISo:DATa:POLarity value command.

SCPI Syntax

- BUS:B<x>:SPI:MISo:DATa:POLarity {HIGH|LOW}
- BUS:B<x>:SPI:MISo:DATa:POLarity?

Info

B<x> is the number of the bus waveform.
HIGH sets the polarity to high.
LOW sets the polarity to low.

BusBItemSpiMisoInput ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:SPI:MISo:INPut command.

Description

This command sets or queries the SPI MISo source for the specified bus. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:SPI:MISo:INPut? query.
Using the .verify(value) method will send the BUS:B<x>:SPI:MISo:INPut? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:SPI:MISo:INPut value command.

SCPI Syntax

- BUS:B<x>:SPI:MISo:INPut {S<x>_Ch<x>|CH<x>|MATH<x>|REF<x>}
- BUS:B<x>:SPI:MISo:INPut?

Info

B<x> is the number of the bus waveform.
S<x>_Ch<x> specifies the remote scope number and the analog channel.
CH<x> designates an analog channel as the source.
MATH<x> designates a math waveform as the source.
REF<x> designates a reference waveform as the source.

BusBItemSpiMisoThreshold ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:SPI:MISo:THReshold command.

Description

This command sets or queries the SPI MISo Data source threshold for the specified bus. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:SPI:MISo:THReshold? query.
Using the .verify(value) method will send the BUS:B<x>:SPI:MISo:THReshold? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:SPI:MISo:THReshold value command.

SCPI Syntax

- BUS:B<x>:SPI:MISo:THReshold <NR3>
- BUS:B<x>:SPI:MISo:THReshold?

Info

B<x> is the number of the bus waveform.
<NR3> is the SPI MISo Data source threshold for the specified bus.

BusBItemSpiMosi ¶

Bases: SCPICmdRead

The BUS:B<x>:SPI:MOSi command tree.

Usage

Using the .query() method will send the BUS:B<x>:SPI:MOSi? query.
Using the .verify(value) method will send the BUS:B<x>:SPI:MOSi? query and raise an AssertionError if the returned value does not match value.

Info

B<x> is the number of the bus waveform.

Properties

.data: The BUS:B<x>:SPI:MOSi:DATa command tree.
.input: The BUS:B<x>:SPI:MOSi:INPut command.
.threshold: The BUS:B<x>:SPI:MOSi:THReshold command.

data `property` ¶

data: BusBItemSpiMosiData

Return the BUS:B<x>:SPI:MOSi:DATa command tree.

Usage

Using the .query() method will send the BUS:B<x>:SPI:MOSi:DATa? query.
Using the .verify(value) method will send the BUS:B<x>:SPI:MOSi:DATa? query and raise an AssertionError if the returned value does not match value.

Info

B<x> is the number of the bus waveform.

Sub-properties

.polarity: The BUS:B<x>:SPI:MOSi:DATa:POLarity command.

input `property` ¶

input: BusBItemSpiMosiInput

Return the BUS:B<x>:SPI:MOSi:INPut command.

Description

This command sets or queries the SPI MOSI source for the specified bus. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:SPI:MOSi:INPut? query.
Using the .verify(value) method will send the BUS:B<x>:SPI:MOSi:INPut? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:SPI:MOSi:INPut value command.

SCPI Syntax

- BUS:B<x>:SPI:MOSi:INPut {S<x>_Ch<x>|CH<x>|MATH<x>|REF<x>}
- BUS:B<x>:SPI:MOSi:INPut?

Info

B<x> is the number of the bus waveform.
S<x>_Ch<x> specifies the remote scope number and the analog channel.
CH<x> designates an analog channel as the source.
MATH<x> designates a math waveform as the source.
REF<x> designates a reference waveform as the source.

threshold `property` ¶

threshold: BusBItemSpiMosiThreshold

Return the BUS:B<x>:SPI:MOSi:THReshold command.

Description

This command sets or queries the SPI MOSI source thresold for the specified bus. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:SPI:MOSi:THReshold? query.
Using the .verify(value) method will send the BUS:B<x>:SPI:MOSi:THReshold? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:SPI:MOSi:THReshold value command.

SCPI Syntax

- BUS:B<x>:SPI:MOSi:THReshold <NR3>
- BUS:B<x>:SPI:MOSi:THReshold?

Info

B<x> is the number of the bus waveform.
<NR3> is the SPI MOSI Data source threshold for the specified bus.

BusBItemSpiMosiData ¶

Bases: SCPICmdRead

The BUS:B<x>:SPI:MOSi:DATa command tree.

Usage

Using the .query() method will send the BUS:B<x>:SPI:MOSi:DATa? query.
Using the .verify(value) method will send the BUS:B<x>:SPI:MOSi:DATa? query and raise an AssertionError if the returned value does not match value.

Info

B<x> is the number of the bus waveform.

Properties

.polarity: The BUS:B<x>:SPI:MOSi:DATa:POLarity command.

polarity `property` ¶

polarity: BusBItemSpiMosiDataPolarity

Return the BUS:B<x>:SPI:MOSi:DATa:POLarity command.

Description

This command sets or queries the SPI MOSI source polarity for the specified bus. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:SPI:MOSi:DATa:POLarity? query.
Using the .verify(value) method will send the BUS:B<x>:SPI:MOSi:DATa:POLarity? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:SPI:MOSi:DATa:POLarity value command.

SCPI Syntax

- BUS:B<x>:SPI:MOSi:DATa:POLarity {HIGH|LOW}
- BUS:B<x>:SPI:MOSi:DATa:POLarity?

Info

B<x> is the number of the bus waveform.
HIGH sets the polarity to high.
LOW sets the polarity to low.

BusBItemSpiMosiDataPolarity ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:SPI:MOSi:DATa:POLarity command.

Description

This command sets or queries the SPI MOSI source polarity for the specified bus. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:SPI:MOSi:DATa:POLarity? query.
Using the .verify(value) method will send the BUS:B<x>:SPI:MOSi:DATa:POLarity? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:SPI:MOSi:DATa:POLarity value command.

SCPI Syntax

- BUS:B<x>:SPI:MOSi:DATa:POLarity {HIGH|LOW}
- BUS:B<x>:SPI:MOSi:DATa:POLarity?

Info

B<x> is the number of the bus waveform.
HIGH sets the polarity to high.
LOW sets the polarity to low.

BusBItemSpiMosiInput ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:SPI:MOSi:INPut command.

Description

This command sets or queries the SPI MOSI source for the specified bus. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:SPI:MOSi:INPut? query.
Using the .verify(value) method will send the BUS:B<x>:SPI:MOSi:INPut? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:SPI:MOSi:INPut value command.

SCPI Syntax

- BUS:B<x>:SPI:MOSi:INPut {S<x>_Ch<x>|CH<x>|MATH<x>|REF<x>}
- BUS:B<x>:SPI:MOSi:INPut?

Info

B<x> is the number of the bus waveform.
S<x>_Ch<x> specifies the remote scope number and the analog channel.
CH<x> designates an analog channel as the source.
MATH<x> designates a math waveform as the source.
REF<x> designates a reference waveform as the source.

BusBItemSpiMosiThreshold ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:SPI:MOSi:THReshold command.

Description

This command sets or queries the SPI MOSI source thresold for the specified bus. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:SPI:MOSi:THReshold? query.
Using the .verify(value) method will send the BUS:B<x>:SPI:MOSi:THReshold? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:SPI:MOSi:THReshold value command.

SCPI Syntax

- BUS:B<x>:SPI:MOSi:THReshold <NR3>
- BUS:B<x>:SPI:MOSi:THReshold?

Info

B<x> is the number of the bus waveform.
<NR3> is the SPI MOSI Data source threshold for the specified bus.

BusBItemSpiNumber ¶

Bases: SCPICmdRead

The BUS:B<x>:SPI:NUMBer command tree.

Usage

Using the .query() method will send the BUS:B<x>:SPI:NUMBer? query.
Using the .verify(value) method will send the BUS:B<x>:SPI:NUMBer? query and raise an AssertionError if the returned value does not match value.

Info

B<x> is the number of the bus waveform.

Properties

.inputs: The BUS:B<x>:SPI:NUMBer:INputs command.

inputs `property` ¶

inputs: BusBItemSpiNumberInputs

Return the BUS:B<x>:SPI:NUMBer:INputs command.

Description

This command sets or queries the number of inputs for the specified bus. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:SPI:NUMBer:INputs? query.
Using the .verify(value) method will send the BUS:B<x>:SPI:NUMBer:INputs? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:SPI:NUMBer:INputs value command.

SCPI Syntax

- BUS:B<x>:SPI:NUMBer:INputs {ONE|TWO}
- BUS:B<x>:SPI:NUMBer:INputs?

Info

B<x> is the number of the bus waveform.
ONE sets the Data Inputs as one.
TWO sets the Data Inputs as two.

BusBItemSpiNumberInputs ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:SPI:NUMBer:INputs command.

Description

This command sets or queries the number of inputs for the specified bus. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:SPI:NUMBer:INputs? query.
Using the .verify(value) method will send the BUS:B<x>:SPI:NUMBer:INputs? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:SPI:NUMBer:INputs value command.

SCPI Syntax

- BUS:B<x>:SPI:NUMBer:INputs {ONE|TWO}
- BUS:B<x>:SPI:NUMBer:INputs?

Info

B<x> is the number of the bus waveform.
ONE sets the Data Inputs as one.
TWO sets the Data Inputs as two.

BusBItemSpiSelect ¶

Bases: SCPICmdRead

The BUS:B<x>:SPI:SELect command tree.

Usage

Using the .query() method will send the BUS:B<x>:SPI:SELect? query.
Using the .verify(value) method will send the BUS:B<x>:SPI:SELect? query and raise an AssertionError if the returned value does not match value.

Info

B<x> is the number of the bus waveform.

Properties

.polarity: The BUS:B<x>:SPI:SELect:POLarity command.
.source: The BUS:B<x>:SPI:SELect:SOUrce command.
.threshold: The BUS:B<x>:SPI:SELect:THReshold command.

polarity `property` ¶

polarity: BusBItemSpiSelectPolarity

Return the BUS:B<x>:SPI:SELect:POLarity command.

Description

This command sets or queries the SPI Slave Select (SS) polarity for the specified bus. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:SPI:SELect:POLarity? query.
Using the .verify(value) method will send the BUS:B<x>:SPI:SELect:POLarity? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:SPI:SELect:POLarity value command.

SCPI Syntax

- BUS:B<x>:SPI:SELect:POLarity {LOW|HIGH}
- BUS:B<x>:SPI:SELect:POLarity?

Info

B<x> is the number of the bus waveform.
LOW sets an active low polarity.
HIGH sets an active high polarity.

source `property` ¶

source: BusBItemSpiSelectSource

Return the BUS:B<x>:SPI:SELect:SOUrce command.

Description

This command sets or queries the SPI Slave Select (SS) source for the specified bus. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:SPI:SELect:SOUrce? query.
Using the .verify(value) method will send the BUS:B<x>:SPI:SELect:SOUrce? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:SPI:SELect:SOUrce value command.

SCPI Syntax

- BUS:B<x>:SPI:SELect:SOUrce {S<x>_Ch<x>_D<x>|CH<x>|CH<x>_D<x>|MATH<x>|REF<x>|REF<x>_D<x>}
- BUS:B<x>:SPI:SELect:SOUrce?

Info

B<x> is the number of the bus waveform.
S<x>_Ch<x>_D<x> specifies is the remote scope number, the analog channel and the digital channel.
CH<x> designates an analog channel as the buses’ SPI Slave Select source.
CH<x>_D<x> designates a digital channel as the buses’ SPI Slave Select source.
MATH<x> designates a math waveform as the Slave Select source.
REF<x> designates a reference waveform as the Slave Select source.
REF<x>_D<x> specifies a digital reference waveform as the clock source waveform for the specified SPI bus.

threshold `property` ¶

threshold: BusBItemSpiSelectThreshold

Return the BUS:B<x>:SPI:SELect:THReshold command.

Description

This command sets or queries the SPI Select (SS) source threshold for the specified bus. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:SPI:SELect:THReshold? query.
Using the .verify(value) method will send the BUS:B<x>:SPI:SELect:THReshold? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:SPI:SELect:THReshold value command.

SCPI Syntax

- BUS:B<x>:SPI:SELect:THReshold <NR3>
- BUS:B<x>:SPI:SELect:THReshold?

Info

B<x> is the number of the bus waveform.
<NR3> is the SPI Select (SS) source threshold for the specified bus.

BusBItemSpiSelectPolarity ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:SPI:SELect:POLarity command.

Description

This command sets or queries the SPI Slave Select (SS) polarity for the specified bus. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:SPI:SELect:POLarity? query.
Using the .verify(value) method will send the BUS:B<x>:SPI:SELect:POLarity? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:SPI:SELect:POLarity value command.

SCPI Syntax

- BUS:B<x>:SPI:SELect:POLarity {LOW|HIGH}
- BUS:B<x>:SPI:SELect:POLarity?

Info

B<x> is the number of the bus waveform.
LOW sets an active low polarity.
HIGH sets an active high polarity.

BusBItemSpiSelectSource ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:SPI:SELect:SOUrce command.

Description

This command sets or queries the SPI Slave Select (SS) source for the specified bus. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:SPI:SELect:SOUrce? query.
Using the .verify(value) method will send the BUS:B<x>:SPI:SELect:SOUrce? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:SPI:SELect:SOUrce value command.

SCPI Syntax

- BUS:B<x>:SPI:SELect:SOUrce {S<x>_Ch<x>_D<x>|CH<x>|CH<x>_D<x>|MATH<x>|REF<x>|REF<x>_D<x>}
- BUS:B<x>:SPI:SELect:SOUrce?

Info

B<x> is the number of the bus waveform.
S<x>_Ch<x>_D<x> specifies is the remote scope number, the analog channel and the digital channel.
CH<x> designates an analog channel as the buses’ SPI Slave Select source.
CH<x>_D<x> designates a digital channel as the buses’ SPI Slave Select source.
MATH<x> designates a math waveform as the Slave Select source.
REF<x> designates a reference waveform as the Slave Select source.
REF<x>_D<x> specifies a digital reference waveform as the clock source waveform for the specified SPI bus.

BusBItemSpiSelectThreshold ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:SPI:SELect:THReshold command.

Description

This command sets or queries the SPI Select (SS) source threshold for the specified bus. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:SPI:SELect:THReshold? query.
Using the .verify(value) method will send the BUS:B<x>:SPI:SELect:THReshold? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:SPI:SELect:THReshold value command.

SCPI Syntax

- BUS:B<x>:SPI:SELect:THReshold <NR3>
- BUS:B<x>:SPI:SELect:THReshold?

Info

B<x> is the number of the bus waveform.
<NR3> is the SPI Select (SS) source threshold for the specified bus.

BusBItemSpmi ¶

Bases: SCPICmdRead

The BUS:B<x>:SPMI command tree.

Usage

Using the .query() method will send the BUS:B<x>:SPMI? query.
Using the .verify(value) method will send the BUS:B<x>:SPMI? query and raise an AssertionError if the returned value does not match value.

Info

B<x> is the number of the bus waveform.

Properties

.sclk: The BUS:B<x>:SPMI:SCLk command tree.
.sdata: The BUS:B<x>:SPMI:SDATa command tree.

sclk `property` ¶

sclk: BusBItemSpmiSclk

Return the BUS:B<x>:SPMI:SCLk command tree.

Usage

Using the .query() method will send the BUS:B<x>:SPMI:SCLk? query.
Using the .verify(value) method will send the BUS:B<x>:SPMI:SCLk? query and raise an AssertionError if the returned value does not match value.

Info

B<x> is the number of the bus waveform.

Sub-properties

.source: The BUS:B<x>:SPMI:SCLk:SOUrce command.
.threshold: The BUS:B<x>:SPMI:SCLk:THReshold command.

sdata `property` ¶

sdata: BusBItemSpmiSdata

Return the BUS:B<x>:SPMI:SDATa command tree.

Usage

Using the .query() method will send the BUS:B<x>:SPMI:SDATa? query.
Using the .verify(value) method will send the BUS:B<x>:SPMI:SDATa? query and raise an AssertionError if the returned value does not match value.

Info

B<x> is the number of the bus waveform.

Sub-properties

.source: The BUS:B<x>:SPMI:SDATa:SOUrce command.
.threshold: The BUS:B<x>:SPMI:SDATa:THReshold command.

BusBItemSpmiSclk ¶

Bases: SCPICmdRead

The BUS:B<x>:SPMI:SCLk command tree.

Usage

Using the .query() method will send the BUS:B<x>:SPMI:SCLk? query.
Using the .verify(value) method will send the BUS:B<x>:SPMI:SCLk? query and raise an AssertionError if the returned value does not match value.

Info

B<x> is the number of the bus waveform.

Properties

.source: The BUS:B<x>:SPMI:SCLk:SOUrce command.
.threshold: The BUS:B<x>:SPMI:SCLk:THReshold command.

source `property` ¶

source: BusBItemSpmiSclkSource

Return the BUS:B<x>:SPMI:SCLk:SOUrce command.

Description

This command sets or queries the SPMI Clock (SCLK) source for the specified bus.

Usage

Using the .query() method will send the BUS:B<x>:SPMI:SCLk:SOUrce? query.
Using the .verify(value) method will send the BUS:B<x>:SPMI:SCLk:SOUrce? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:SPMI:SCLk:SOUrce value command.

SCPI Syntax

- BUS:B<x>:SPMI:SCLk:SOUrce {CH<x>|CH<x>_Dx>|Math<x>|REF<x>|REF<x>_D<x>}
- BUS:B<x>:SPMI:SCLk:SOUrce?

Info

B<x> is the number of the bus waveform.
CH<x> specifies an analog channel as the clock source waveform for the SPMI bus.
CH<x>_Dx> specifies a digital channel and bit as the clock source waveform for the specified SPMI bus.
Math<x> specifies a math waveform as the clock source waveform for the specified SPMI bus.
REF<x> specifies a reference waveform as the clock source waveform for the specified SPMI bus.
REF<x>_D<x> specifies a digital reference waveform and bit as the clock source waveform for the specified SPMI bus.

threshold `property` ¶

threshold: BusBItemSpmiSclkThreshold

Return the BUS:B<x>:SPMI:SCLk:THReshold command.

Description

This command sets or queries the SPMI Clock (SCLK) source threshold for the specified bus.

Usage

Using the .query() method will send the BUS:B<x>:SPMI:SCLk:THReshold? query.
Using the .verify(value) method will send the BUS:B<x>:SPMI:SCLk:THReshold? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:SPMI:SCLk:THReshold value command.

SCPI Syntax

- BUS:B<x>:SPMI:SCLk:THReshold <NR3>
- BUS:B<x>:SPMI:SCLk:THReshold?

Info

B<x> is the number of the bus waveform.
<NR3> is the clock (SCLK) source threshold value for the specified SPMI bus.

BusBItemSpmiSclkSource ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:SPMI:SCLk:SOUrce command.

Description

This command sets or queries the SPMI Clock (SCLK) source for the specified bus.

Usage

Using the .query() method will send the BUS:B<x>:SPMI:SCLk:SOUrce? query.
Using the .verify(value) method will send the BUS:B<x>:SPMI:SCLk:SOUrce? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:SPMI:SCLk:SOUrce value command.

SCPI Syntax

- BUS:B<x>:SPMI:SCLk:SOUrce {CH<x>|CH<x>_Dx>|Math<x>|REF<x>|REF<x>_D<x>}
- BUS:B<x>:SPMI:SCLk:SOUrce?

Info

B<x> is the number of the bus waveform.
CH<x> specifies an analog channel as the clock source waveform for the SPMI bus.
CH<x>_Dx> specifies a digital channel and bit as the clock source waveform for the specified SPMI bus.
Math<x> specifies a math waveform as the clock source waveform for the specified SPMI bus.
REF<x> specifies a reference waveform as the clock source waveform for the specified SPMI bus.
REF<x>_D<x> specifies a digital reference waveform and bit as the clock source waveform for the specified SPMI bus.

BusBItemSpmiSclkThreshold ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:SPMI:SCLk:THReshold command.

Description

This command sets or queries the SPMI Clock (SCLK) source threshold for the specified bus.

Usage

Using the .query() method will send the BUS:B<x>:SPMI:SCLk:THReshold? query.
Using the .verify(value) method will send the BUS:B<x>:SPMI:SCLk:THReshold? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:SPMI:SCLk:THReshold value command.

SCPI Syntax

- BUS:B<x>:SPMI:SCLk:THReshold <NR3>
- BUS:B<x>:SPMI:SCLk:THReshold?

Info

B<x> is the number of the bus waveform.
<NR3> is the clock (SCLK) source threshold value for the specified SPMI bus.

BusBItemSpmiSdata ¶

Bases: SCPICmdRead

The BUS:B<x>:SPMI:SDATa command tree.

Usage

Using the .query() method will send the BUS:B<x>:SPMI:SDATa? query.
Using the .verify(value) method will send the BUS:B<x>:SPMI:SDATa? query and raise an AssertionError if the returned value does not match value.

Info

B<x> is the number of the bus waveform.

Properties

.source: The BUS:B<x>:SPMI:SDATa:SOUrce command.
.threshold: The BUS:B<x>:SPMI:SDATa:THReshold command.

source `property` ¶

source: BusBItemSpmiSdataSource

Return the BUS:B<x>:SPMI:SDATa:SOUrce command.

Description

This command sets or queries the SPMI Data (SDATA) source for the specified bus.

Usage

Using the .query() method will send the BUS:B<x>:SPMI:SDATa:SOUrce? query.
Using the .verify(value) method will send the BUS:B<x>:SPMI:SDATa:SOUrce? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:SPMI:SDATa:SOUrce value command.

SCPI Syntax

- BUS:B<x>:SPMI:SDATa:SOUrce {CH<x>|CH<x>_Dx>|Math<x>|REF<x>|REF<x>_D<x>}
- BUS:B<x>:SPMI:SDATa:SOUrce?

Info

B<x> is the number of the bus waveform.
CH<x> specifies an analog channel as the data source waveform for the SPMI bus.
CH<x>_Dx> specifies a digital channel and bit as the data source waveform for the specified SPMI bus.
Math<x> specifies a math waveform as the data source waveform for the specified SPMI bus.
REF<x> specifies a reference waveform as the data source waveform for the specified SPMI bus.
REF<x>_D<x> specifies a digital reference waveform and bit as the data source waveform for the specified SPMI bus.

threshold `property` ¶

threshold: BusBItemSpmiSdataThreshold

Return the BUS:B<x>:SPMI:SDATa:THReshold command.

Description

This command sets or queries the SPMI Data (SDATA) source threshold for the specified bus.

Usage

Using the .query() method will send the BUS:B<x>:SPMI:SDATa:THReshold? query.
Using the .verify(value) method will send the BUS:B<x>:SPMI:SDATa:THReshold? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:SPMI:SDATa:THReshold value command.

SCPI Syntax

- BUS:B<x>:SPMI:SDATa:THReshold <NR3>
- BUS:B<x>:SPMI:SDATa:THReshold?

Info

B<x> is the number of the bus waveform.
<NR3> is the data (SDATA) source threshold value for the specified SPMI bus.

BusBItemSpmiSdataSource ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:SPMI:SDATa:SOUrce command.

Description

This command sets or queries the SPMI Data (SDATA) source for the specified bus.

Usage

Using the .query() method will send the BUS:B<x>:SPMI:SDATa:SOUrce? query.
Using the .verify(value) method will send the BUS:B<x>:SPMI:SDATa:SOUrce? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:SPMI:SDATa:SOUrce value command.

SCPI Syntax

- BUS:B<x>:SPMI:SDATa:SOUrce {CH<x>|CH<x>_Dx>|Math<x>|REF<x>|REF<x>_D<x>}
- BUS:B<x>:SPMI:SDATa:SOUrce?

Info

B<x> is the number of the bus waveform.
CH<x> specifies an analog channel as the data source waveform for the SPMI bus.
CH<x>_Dx> specifies a digital channel and bit as the data source waveform for the specified SPMI bus.
Math<x> specifies a math waveform as the data source waveform for the specified SPMI bus.
REF<x> specifies a reference waveform as the data source waveform for the specified SPMI bus.
REF<x>_D<x> specifies a digital reference waveform and bit as the data source waveform for the specified SPMI bus.

BusBItemSpmiSdataThreshold ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:SPMI:SDATa:THReshold command.

Description

This command sets or queries the SPMI Data (SDATA) source threshold for the specified bus.

Usage

Using the .query() method will send the BUS:B<x>:SPMI:SDATa:THReshold? query.
Using the .verify(value) method will send the BUS:B<x>:SPMI:SDATa:THReshold? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:SPMI:SDATa:THReshold value command.

SCPI Syntax

- BUS:B<x>:SPMI:SDATa:THReshold <NR3>
- BUS:B<x>:SPMI:SDATa:THReshold?

Info

B<x> is the number of the bus waveform.
<NR3> is the data (SDATA) source threshold value for the specified SPMI bus.

BusBItemSvid ¶

Bases: SCPICmdRead

The BUS:B<x>:SVID command tree.

Usage

Using the .query() method will send the BUS:B<x>:SVID? query.
Using the .verify(value) method will send the BUS:B<x>:SVID? query and raise an AssertionError if the returned value does not match value.

Info

B<x> is the number of the bus waveform.

Properties

.alert: The BUS:B<x>:SVID:ALERT command tree.
.clock: The BUS:B<x>:SVID:CLOCk command tree.
.data: The BUS:B<x>:SVID:DATA command tree.

alert `property` ¶

alert: BusBItemSvidAlert

Return the BUS:B<x>:SVID:ALERT command tree.

Usage

Using the .query() method will send the BUS:B<x>:SVID:ALERT? query.
Using the .verify(value) method will send the BUS:B<x>:SVID:ALERT? query and raise an AssertionError if the returned value does not match value.

Info

B<x> is the number of the bus waveform.

Sub-properties

.source: The BUS:B<x>:SVID:ALERT:SOUrce command.
.threshold: The BUS:B<x>:SVID:ALERT:THReshold command.

clock `property` ¶

clock: BusBItemSvidClock

Return the BUS:B<x>:SVID:CLOCk command tree.

Usage

Using the .query() method will send the BUS:B<x>:SVID:CLOCk? query.
Using the .verify(value) method will send the BUS:B<x>:SVID:CLOCk? query and raise an AssertionError if the returned value does not match value.

Info

B<x> is the number of the bus waveform.

Sub-properties

.source: The BUS:B<x>:SVID:CLOCk:SOUrce command.
.threshold: The BUS:B<x>:SVID:CLOCk:THReshold command.

data `property` ¶

data: BusBItemSvidData

Return the BUS:B<x>:SVID:DATA command tree.

Usage

Using the .query() method will send the BUS:B<x>:SVID:DATA? query.
Using the .verify(value) method will send the BUS:B<x>:SVID:DATA? query and raise an AssertionError if the returned value does not match value.

Info

B<x> is the number of the bus waveform.

Sub-properties

.source: The BUS:B<x>:SVID:DATA:SOUrce command.
.threshold: The BUS:B<x>:SVID:DATA:THReshold command.

BusBItemSvidAlert ¶

Bases: SCPICmdRead

The BUS:B<x>:SVID:ALERT command tree.

Usage

Using the .query() method will send the BUS:B<x>:SVID:ALERT? query.
Using the .verify(value) method will send the BUS:B<x>:SVID:ALERT? query and raise an AssertionError if the returned value does not match value.

Info

B<x> is the number of the bus waveform.

Properties

.source: The BUS:B<x>:SVID:ALERT:SOUrce command.
.threshold: The BUS:B<x>:SVID:ALERT:THReshold command.

source `property` ¶

source: BusBItemSvidAlertSource

Return the BUS:B<x>:SVID:ALERT:SOUrce command.

Description

This command sets or queries alert source channel for the specified SVID bus. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:SVID:ALERT:SOUrce? query.
Using the .verify(value) method will send the BUS:B<x>:SVID:ALERT:SOUrce? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:SVID:ALERT:SOUrce value command.

SCPI Syntax

- BUS:B<x>:SVID:ALERT:SOUrce {S<x>_Ch<x>|CH<x>|MATH<x>|REF<x>}
- BUS:B<x>:SVID:ALERT:SOUrce?

Info

B<x> is the number of the bus waveform.
S<x>_Ch<x> specifies the remote scope number and the analog channel.
CH<x> specifies an analog channel as the data source.
MATH<x> specifies a math channel as the data source.
REF<x> specifies a digital reference waveform as the data source.

threshold `property` ¶

threshold: BusBItemSvidAlertThreshold

Return the BUS:B<x>:SVID:ALERT:THReshold command.

Description

This command sets or queries the alert threshold for the specified SVID bus. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:SVID:ALERT:THReshold? query.
Using the .verify(value) method will send the BUS:B<x>:SVID:ALERT:THReshold? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:SVID:ALERT:THReshold value command.

SCPI Syntax

- BUS:B<x>:SVID:ALERT:THReshold <NR3>
- BUS:B<x>:SVID:ALERT:THReshold?

Info

B<x> is the number of the bus waveform.
<NR3> is the SVID Strobe threshold for the specified bus. The argument range is -8V to +8V.

BusBItemSvidAlertSource ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:SVID:ALERT:SOUrce command.

Description

This command sets or queries alert source channel for the specified SVID bus. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:SVID:ALERT:SOUrce? query.
Using the .verify(value) method will send the BUS:B<x>:SVID:ALERT:SOUrce? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:SVID:ALERT:SOUrce value command.

SCPI Syntax

- BUS:B<x>:SVID:ALERT:SOUrce {S<x>_Ch<x>|CH<x>|MATH<x>|REF<x>}
- BUS:B<x>:SVID:ALERT:SOUrce?

Info

B<x> is the number of the bus waveform.
S<x>_Ch<x> specifies the remote scope number and the analog channel.
CH<x> specifies an analog channel as the data source.
MATH<x> specifies a math channel as the data source.
REF<x> specifies a digital reference waveform as the data source.

BusBItemSvidAlertThreshold ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:SVID:ALERT:THReshold command.

Description

This command sets or queries the alert threshold for the specified SVID bus. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:SVID:ALERT:THReshold? query.
Using the .verify(value) method will send the BUS:B<x>:SVID:ALERT:THReshold? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:SVID:ALERT:THReshold value command.

SCPI Syntax

- BUS:B<x>:SVID:ALERT:THReshold <NR3>
- BUS:B<x>:SVID:ALERT:THReshold?

Info

B<x> is the number of the bus waveform.
<NR3> is the SVID Strobe threshold for the specified bus. The argument range is -8V to +8V.

BusBItemSvidClock ¶

Bases: SCPICmdRead

The BUS:B<x>:SVID:CLOCk command tree.

Usage

Using the .query() method will send the BUS:B<x>:SVID:CLOCk? query.
Using the .verify(value) method will send the BUS:B<x>:SVID:CLOCk? query and raise an AssertionError if the returned value does not match value.

Info

B<x> is the number of the bus waveform.

Properties

.source: The BUS:B<x>:SVID:CLOCk:SOUrce command.
.threshold: The BUS:B<x>:SVID:CLOCk:THReshold command.

source `property` ¶

source: BusBItemSvidClockSource

Return the BUS:B<x>:SVID:CLOCk:SOUrce command.

Description

This command sets or queries clock source channel for the specified SVID bus. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:SVID:CLOCk:SOUrce? query.
Using the .verify(value) method will send the BUS:B<x>:SVID:CLOCk:SOUrce? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:SVID:CLOCk:SOUrce value command.

SCPI Syntax

- BUS:B<x>:SVID:CLOCk:SOUrce {S<x>_Ch<x>|CH<x>|MATH<x>|REF<x>}
- BUS:B<x>:SVID:CLOCk:SOUrce?

Info

B<x> is the number of the bus waveform.
S<x>_Ch<x> specifies the remote scope number and the analog channel.
CH<x> specifies an analog channel as the source.
MATH<x> specifies a math channel as the source.
REF<x> specifies a digital reference waveform as the source.

threshold `property` ¶

threshold: BusBItemSvidClockThreshold

Return the BUS:B<x>:SVID:CLOCk:THReshold command.

Description

This command sets or queries the clock threshold for the specified SVID bus. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:SVID:CLOCk:THReshold? query.
Using the .verify(value) method will send the BUS:B<x>:SVID:CLOCk:THReshold? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:SVID:CLOCk:THReshold value command.

SCPI Syntax

- BUS:B<x>:SVID:CLOCk:THReshold <NR3>
- BUS:B<x>:SVID:CLOCk:THReshold?

Info

B<x> is the number of the bus waveform.
<NR3> is the SVID Strobe threshold for the specified bus. The argument range is -8V to +8V.

BusBItemSvidClockSource ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:SVID:CLOCk:SOUrce command.

Description

This command sets or queries clock source channel for the specified SVID bus. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:SVID:CLOCk:SOUrce? query.
Using the .verify(value) method will send the BUS:B<x>:SVID:CLOCk:SOUrce? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:SVID:CLOCk:SOUrce value command.

SCPI Syntax

- BUS:B<x>:SVID:CLOCk:SOUrce {S<x>_Ch<x>|CH<x>|MATH<x>|REF<x>}
- BUS:B<x>:SVID:CLOCk:SOUrce?

Info

B<x> is the number of the bus waveform.
S<x>_Ch<x> specifies the remote scope number and the analog channel.
CH<x> specifies an analog channel as the source.
MATH<x> specifies a math channel as the source.
REF<x> specifies a digital reference waveform as the source.

BusBItemSvidClockThreshold ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:SVID:CLOCk:THReshold command.

Description

This command sets or queries the clock threshold for the specified SVID bus. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:SVID:CLOCk:THReshold? query.
Using the .verify(value) method will send the BUS:B<x>:SVID:CLOCk:THReshold? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:SVID:CLOCk:THReshold value command.

SCPI Syntax

- BUS:B<x>:SVID:CLOCk:THReshold <NR3>
- BUS:B<x>:SVID:CLOCk:THReshold?

Info

B<x> is the number of the bus waveform.
<NR3> is the SVID Strobe threshold for the specified bus. The argument range is -8V to +8V.

BusBItemSvidData ¶

Bases: SCPICmdRead

The BUS:B<x>:SVID:DATA command tree.

Usage

Using the .query() method will send the BUS:B<x>:SVID:DATA? query.
Using the .verify(value) method will send the BUS:B<x>:SVID:DATA? query and raise an AssertionError if the returned value does not match value.

Info

B<x> is the number of the bus waveform.

Properties

.source: The BUS:B<x>:SVID:DATA:SOUrce command.
.threshold: The BUS:B<x>:SVID:DATA:THReshold command.

source `property` ¶

source: BusBItemSvidDataSource

Return the BUS:B<x>:SVID:DATA:SOUrce command.

Description

This command sets or queries data source channel for the specified SVID bus. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:SVID:DATA:SOUrce? query.
Using the .verify(value) method will send the BUS:B<x>:SVID:DATA:SOUrce? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:SVID:DATA:SOUrce value command.

SCPI Syntax

- BUS:B<x>:SVID:DATA:SOUrce {S<x>_Ch<x>|CH<x>|MATH<x>|REF<x>}
- BUS:B<x>:SVID:DATA:SOUrce?

Info

B<x> is the number of the bus waveform.
S<x>_Ch<x> specifies the remote scope number and the analog channel.
CH<x> specifies an analog channel as the source.
MATH<x> specifies a math channel as the source.
REF<x> specifies a digital reference waveform as the source.

threshold `property` ¶

threshold: BusBItemSvidDataThreshold

Return the BUS:B<x>:SVID:DATA:THReshold command.

Description

This command sets or queries the data threshold for the specified SVID bus. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:SVID:DATA:THReshold? query.
Using the .verify(value) method will send the BUS:B<x>:SVID:DATA:THReshold? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:SVID:DATA:THReshold value command.

SCPI Syntax

- BUS:B<x>:SVID:DATA:THReshold <NR3>
- BUS:B<x>:SVID:DATA:THReshold?

Info

B<x> is the number of the bus waveform.
<NR3> is the SVID Strobe threshold for the specified bus. The argument range is -8V to +8V.

BusBItemSvidDataSource ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:SVID:DATA:SOUrce command.

Description

This command sets or queries data source channel for the specified SVID bus. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:SVID:DATA:SOUrce? query.
Using the .verify(value) method will send the BUS:B<x>:SVID:DATA:SOUrce? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:SVID:DATA:SOUrce value command.

SCPI Syntax

- BUS:B<x>:SVID:DATA:SOUrce {S<x>_Ch<x>|CH<x>|MATH<x>|REF<x>}
- BUS:B<x>:SVID:DATA:SOUrce?

Info

B<x> is the number of the bus waveform.
S<x>_Ch<x> specifies the remote scope number and the analog channel.
CH<x> specifies an analog channel as the source.
MATH<x> specifies a math channel as the source.
REF<x> specifies a digital reference waveform as the source.

BusBItemSvidDataThreshold ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:SVID:DATA:THReshold command.

Description

This command sets or queries the data threshold for the specified SVID bus. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:SVID:DATA:THReshold? query.
Using the .verify(value) method will send the BUS:B<x>:SVID:DATA:THReshold? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:SVID:DATA:THReshold value command.

SCPI Syntax

- BUS:B<x>:SVID:DATA:THReshold <NR3>
- BUS:B<x>:SVID:DATA:THReshold?

Info

B<x> is the number of the bus waveform.
<NR3> is the SVID Strobe threshold for the specified bus. The argument range is -8V to +8V.

BusBItemType ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:TYPe command.

Description

This command sets or queries the bus type or standard for the specified bus. The bus is specified by x. Arguments for a bus type are only available then the required serial bus option is installed.

Usage

Using the .query() method will send the BUS:B<x>:TYPe? query.
Using the .verify(value) method will send the BUS:B<x>:TYPe? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:TYPe value command.

SCPI Syntax

- BUS:B<x>:TYPe {ARINC429|AUDio|CAN|ETHernet|EUSB|FLEXRAY|I2C|I3C|LIN|MDIO|MIL1553B|PARallel|RS232C|SENT|SPI|SPMI|SVID|USB}
- BUS:B<x>:TYPe?

Info

B<x> is the number of the bus waveform.
ARINC429 specifies the ARINC 429 avionics serial bus.
AUDio specifies an audio bus.
CAN specifies a Controller Area Network bus.
ETHernet specifies the Ethernet bus.
EUSB specifies a eUSB bus. Requires option SR-EUSB2.
FLEXRAY specifies a FlexRay bus.
I2C specifies the Inter-IC bus.
I3C specifies the MIPI Improved Inter Integrated Circuit (I3C) bus.
LIN specifies a Local Interconnect Network bus.
MDIO specifies a MDIO bus.
MIL1553B specifies the MIL-STD-1553 avionics serial bus.
PARallel specifies a parallel bus.
RS232C specifies the RS-232 Serial bus.
SENT specifies the Single Edge Nibble Transmission (SENT) automotive serial bus.
SPI specifies the Serial Peripheral Interface bus.
SPMI Specifies a System Power Management Interface bus.
SVID Specifies a Serial VID bus.
USB specifies the Universal Serial bus.

BusBItemUsb ¶

Bases: SCPICmdRead

The BUS:B<x>:USB command tree.

Usage

Using the .query() method will send the BUS:B<x>:USB? query.
Using the .verify(value) method will send the BUS:B<x>:USB? query and raise an AssertionError if the returned value does not match value.

Info

B<x> is the number of the bus waveform.

Properties

.bitrate: The BUS:B<x>:USB:BITRate command.
.dataminusthreshold: The BUS:B<x>:USB:DATAMINUSTHRESHold command.
.dataplusthreshold: The BUS:B<x>:USB:DATAPLUSTHRESHold command.
.lowthreshold: The BUS:B<x>:USB:LOWTHRESHold command.
.signaltype: The BUS:B<x>:USB:SIGNALTYpe command.
.source: The BUS:B<x>:USB:SOUrce command.
.threshold: The BUS:B<x>:USB:THRESHold command.

bitrate `property` ¶

bitrate: BusBItemUsbBitrate

Return the BUS:B<x>:USB:BITRate command.

Description

This command sets or queries the USB bit rate for bus , where x is the bus number.

Usage

Using the .query() method will send the BUS:B<x>:USB:BITRate? query.
Using the .verify(value) method will send the BUS:B<x>:USB:BITRate? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:USB:BITRate value command.

SCPI Syntax

- BUS:B<x>:USB:BITRate {FULL|HIGH|LOW}
- BUS:B<x>:USB:BITRate?

Info

B<x> is the number of the bus waveform.
FULL indicates the bit rate is 12 Mbps.
HIGH indicates the bit rate is 480 Mbps.
LOW indicates the bit rate is 1.5 Mbps.

dataminusthreshold `property` ¶

dataminusthreshold: BusBItemUsbDataminusthreshold

Return the BUS:B<x>:USB:DATAMINUSTHRESHold command.

Description

This command sets or queries the USB D- source threshold for the specified bus. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:USB:DATAMINUSTHRESHold? query.
Using the .verify(value) method will send the BUS:B<x>:USB:DATAMINUSTHRESHold? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:USB:DATAMINUSTHRESHold value command.

SCPI Syntax

- BUS:B<x>:USB:DATAMINUSTHRESHold <NR3>
- BUS:B<x>:USB:DATAMINUSTHRESHold?

Info

B<x> is the number of the bus waveform.
<NR3> is the Minus threshold.

dataplusthreshold `property` ¶

dataplusthreshold: BusBItemUsbDataplusthreshold

Return the BUS:B<x>:USB:DATAPLUSTHRESHold command.

Description

This command sets or queries the USB D+ source threshold for the specified bus. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:USB:DATAPLUSTHRESHold? query.
Using the .verify(value) method will send the BUS:B<x>:USB:DATAPLUSTHRESHold? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:USB:DATAPLUSTHRESHold value command.

SCPI Syntax

- BUS:B<x>:USB:DATAPLUSTHRESHold <NR3>
- BUS:B<x>:USB:DATAPLUSTHRESHold?

Info

B<x> is the number of the bus waveform.
<NR3> is the Plus threshold.

lowthreshold `property` ¶

lowthreshold: BusBItemUsbLowthreshold

Return the BUS:B<x>:USB:LOWTHRESHold command.

Description

This command sets or queries the USB data source threshold for the specified bus when the signal type is differential. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:USB:LOWTHRESHold? query.
Using the .verify(value) method will send the BUS:B<x>:USB:LOWTHRESHold? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:USB:LOWTHRESHold value command.

SCPI Syntax

- BUS:B<x>:USB:LOWTHRESHold <NR3>
- BUS:B<x>:USB:LOWTHRESHold?

Info

B<x> is the number of the bus waveform.
<NR3> is the Low threshold.

signaltype `property` ¶

signaltype: BusBItemUsbSignaltype

Return the BUS:B<x>:USB:SIGNALTYpe command.

Description

This command sets or queries the USB signal type for the specified bus. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:USB:SIGNALTYpe? query.
Using the .verify(value) method will send the BUS:B<x>:USB:SIGNALTYpe? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:USB:SIGNALTYpe value command.

SCPI Syntax

- BUS:B<x>:USB:SIGNALTYpe {SINGLE|DIFF}
- BUS:B<x>:USB:SIGNALTYpe?

Info

B<x> is the number of the bus waveform.
SINGLE specifies single-ended signals.
DIFF specifies differential signals.

source `property` ¶

source: BusBItemUsbSource

Return the BUS:B<x>:USB:SOUrce command.

Description

This command sets or queries the USB data source when the signal type is differential for bus . The bus number is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:USB:SOUrce? query.
Using the .verify(value) method will send the BUS:B<x>:USB:SOUrce? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:USB:SOUrce value command.

SCPI Syntax

- BUS:B<x>:USB:SOUrce {S<x>_Ch<x>|CH<x>|MATH<x>|REF<x>}
- BUS:B<x>:USB:SOUrce?

Info

B<x> is the number of the bus waveform.
S<x>_Ch<x> specifies the remote scope number and the analog channel.
CH<x> specifies an analog channel as the data source for the specified USB bus.
MATH<x> specifies a math channel as the data source for the specified USB bus.
REF<x> specifies a reference waveform as the data source.

Sub-properties

.dminus: The BUS:B<x>:USB:SOUrce:DMINus command.
.dplus: The BUS:B<x>:USB:SOUrce:DPLUs command.

threshold `property` ¶

threshold: BusBItemUsbThreshold

Return the BUS:B<x>:USB:THRESHold command.

Description

This command sets or queries the USB DATA source High threshold for the specified bus when the signal source is differential. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:USB:THRESHold? query.
Using the .verify(value) method will send the BUS:B<x>:USB:THRESHold? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:USB:THRESHold value command.

SCPI Syntax

- BUS:B<x>:USB:THRESHold <NR3>
- BUS:B<x>:USB:THRESHold?

Info

B<x> is the number of the bus waveform.
<NR3> is the USB DATA source High threshold for the specified bus.

BusBItemUsbBitrate ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:USB:BITRate command.

Description

This command sets or queries the USB bit rate for bus , where x is the bus number.

Usage

Using the .query() method will send the BUS:B<x>:USB:BITRate? query.
Using the .verify(value) method will send the BUS:B<x>:USB:BITRate? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:USB:BITRate value command.

SCPI Syntax

- BUS:B<x>:USB:BITRate {FULL|HIGH|LOW}
- BUS:B<x>:USB:BITRate?

Info

B<x> is the number of the bus waveform.
FULL indicates the bit rate is 12 Mbps.
HIGH indicates the bit rate is 480 Mbps.
LOW indicates the bit rate is 1.5 Mbps.

BusBItemUsbDataminusthreshold ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:USB:DATAMINUSTHRESHold command.

Description

This command sets or queries the USB D- source threshold for the specified bus. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:USB:DATAMINUSTHRESHold? query.
Using the .verify(value) method will send the BUS:B<x>:USB:DATAMINUSTHRESHold? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:USB:DATAMINUSTHRESHold value command.

SCPI Syntax

- BUS:B<x>:USB:DATAMINUSTHRESHold <NR3>
- BUS:B<x>:USB:DATAMINUSTHRESHold?

Info

B<x> is the number of the bus waveform.
<NR3> is the Minus threshold.

BusBItemUsbDataplusthreshold ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:USB:DATAPLUSTHRESHold command.

Description

This command sets or queries the USB D+ source threshold for the specified bus. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:USB:DATAPLUSTHRESHold? query.
Using the .verify(value) method will send the BUS:B<x>:USB:DATAPLUSTHRESHold? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:USB:DATAPLUSTHRESHold value command.

SCPI Syntax

- BUS:B<x>:USB:DATAPLUSTHRESHold <NR3>
- BUS:B<x>:USB:DATAPLUSTHRESHold?

Info

B<x> is the number of the bus waveform.
<NR3> is the Plus threshold.

BusBItemUsbLowthreshold ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:USB:LOWTHRESHold command.

Description

This command sets or queries the USB data source threshold for the specified bus when the signal type is differential. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:USB:LOWTHRESHold? query.
Using the .verify(value) method will send the BUS:B<x>:USB:LOWTHRESHold? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:USB:LOWTHRESHold value command.

SCPI Syntax

- BUS:B<x>:USB:LOWTHRESHold <NR3>
- BUS:B<x>:USB:LOWTHRESHold?

Info

B<x> is the number of the bus waveform.
<NR3> is the Low threshold.

BusBItemUsbSignaltype ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:USB:SIGNALTYpe command.

Description

This command sets or queries the USB signal type for the specified bus. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:USB:SIGNALTYpe? query.
Using the .verify(value) method will send the BUS:B<x>:USB:SIGNALTYpe? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:USB:SIGNALTYpe value command.

SCPI Syntax

- BUS:B<x>:USB:SIGNALTYpe {SINGLE|DIFF}
- BUS:B<x>:USB:SIGNALTYpe?

Info

B<x> is the number of the bus waveform.
SINGLE specifies single-ended signals.
DIFF specifies differential signals.

BusBItemUsbSource ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:USB:SOUrce command.

Description

This command sets or queries the USB data source when the signal type is differential for bus . The bus number is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:USB:SOUrce? query.
Using the .verify(value) method will send the BUS:B<x>:USB:SOUrce? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:USB:SOUrce value command.

SCPI Syntax

- BUS:B<x>:USB:SOUrce {S<x>_Ch<x>|CH<x>|MATH<x>|REF<x>}
- BUS:B<x>:USB:SOUrce?

Info

B<x> is the number of the bus waveform.
S<x>_Ch<x> specifies the remote scope number and the analog channel.
CH<x> specifies an analog channel as the data source for the specified USB bus.
MATH<x> specifies a math channel as the data source for the specified USB bus.
REF<x> specifies a reference waveform as the data source.

Properties

.dminus: The BUS:B<x>:USB:SOUrce:DMINus command.
.dplus: The BUS:B<x>:USB:SOUrce:DPLUs command.

dminus `property` ¶

dminus: BusBItemUsbSourceDminus

Return the BUS:B<x>:USB:SOUrce:DMINus command.

Description

This command sets or queries the USB D- (SDATAMINUS) source for bus when the signal type is single ended. The bus number is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:USB:SOUrce:DMINus? query.
Using the .verify(value) method will send the BUS:B<x>:USB:SOUrce:DMINus? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:USB:SOUrce:DMINus value command.

SCPI Syntax

- BUS:B<x>:USB:SOUrce:DMINus {S<x>_Ch<x>_D<x>|CH<x>|CH<x>_D<x>|MATH<x>|REF<x>|REF<x>_D<x>}
- BUS:B<x>:USB:SOUrce:DMINus?

Info

B<x> is the number of the bus waveform.
S<x>_Ch<x>_D<x> specifies is the remote scope number, the analog channel and the digital channel.
CH<x> specifies an analog channel as the D- source for the specified USB bus.
CH<x>_D<x> specifies a digital channel as the D- source for the specified USB bus.
MATH<x> specifies a math channel as the D- source for the specified USB bus.
REF<x> specifies a reference waveform as the source.
REF<x>_D<x> specifies a digital reference waveform as the clock source waveform for the specified USB bus.

dplus `property` ¶

dplus: BusBItemUsbSourceDplus

Return the BUS:B<x>:USB:SOUrce:DPLUs command.

Description

This command sets or queries the USB dataPlus (SDATAPLUS) source for the specified bus when the signal type is single ended. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:USB:SOUrce:DPLUs? query.
Using the .verify(value) method will send the BUS:B<x>:USB:SOUrce:DPLUs? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:USB:SOUrce:DPLUs value command.

SCPI Syntax

- BUS:B<x>:USB:SOUrce:DPLUs {S<x>_Ch<x>_D<x>|CH<x>|CH<x>_D<x>|MATH<x>|REF<x>|REF<x>_D<x>}
- BUS:B<x>:USB:SOUrce:DPLUs?

Info

B<x> is the number of the bus waveform.
S<x>_Ch<x>_D<x> specifies is the remote scope number, the analog channel and the digital channel.
CH<x> specifies an analog channel as the D+ source for the specified USB bus.
CH<x>_D<x> specifies a digital channel as the D+ source for the specified USB bus.
MATH<x> specifies a math channel as the D+ source for the specified USB bus.
REF<x> specifies a reference waveform as the source.
REF<x>_D<x> specifies a digital reference waveform as the clock source waveform for the specified USB bus.

BusBItemUsbSourceDminus ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:USB:SOUrce:DMINus command.

Description

This command sets or queries the USB D- (SDATAMINUS) source for bus when the signal type is single ended. The bus number is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:USB:SOUrce:DMINus? query.
Using the .verify(value) method will send the BUS:B<x>:USB:SOUrce:DMINus? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:USB:SOUrce:DMINus value command.

SCPI Syntax

- BUS:B<x>:USB:SOUrce:DMINus {S<x>_Ch<x>_D<x>|CH<x>|CH<x>_D<x>|MATH<x>|REF<x>|REF<x>_D<x>}
- BUS:B<x>:USB:SOUrce:DMINus?

Info

B<x> is the number of the bus waveform.
S<x>_Ch<x>_D<x> specifies is the remote scope number, the analog channel and the digital channel.
CH<x> specifies an analog channel as the D- source for the specified USB bus.
CH<x>_D<x> specifies a digital channel as the D- source for the specified USB bus.
MATH<x> specifies a math channel as the D- source for the specified USB bus.
REF<x> specifies a reference waveform as the source.
REF<x>_D<x> specifies a digital reference waveform as the clock source waveform for the specified USB bus.

BusBItemUsbSourceDplus ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:USB:SOUrce:DPLUs command.

Description

This command sets or queries the USB dataPlus (SDATAPLUS) source for the specified bus when the signal type is single ended. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:USB:SOUrce:DPLUs? query.
Using the .verify(value) method will send the BUS:B<x>:USB:SOUrce:DPLUs? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:USB:SOUrce:DPLUs value command.

SCPI Syntax

- BUS:B<x>:USB:SOUrce:DPLUs {S<x>_Ch<x>_D<x>|CH<x>|CH<x>_D<x>|MATH<x>|REF<x>|REF<x>_D<x>}
- BUS:B<x>:USB:SOUrce:DPLUs?

Info

B<x> is the number of the bus waveform.
S<x>_Ch<x>_D<x> specifies is the remote scope number, the analog channel and the digital channel.
CH<x> specifies an analog channel as the D+ source for the specified USB bus.
CH<x>_D<x> specifies a digital channel as the D+ source for the specified USB bus.
MATH<x> specifies a math channel as the D+ source for the specified USB bus.
REF<x> specifies a reference waveform as the source.
REF<x>_D<x> specifies a digital reference waveform as the clock source waveform for the specified USB bus.

BusBItemUsbThreshold ¶

Bases: SCPICmdWrite, SCPICmdRead

The BUS:B<x>:USB:THRESHold command.

Description

This command sets or queries the USB DATA source High threshold for the specified bus when the signal source is differential. The bus is specified by x.

Usage

Using the .query() method will send the BUS:B<x>:USB:THRESHold? query.
Using the .verify(value) method will send the BUS:B<x>:USB:THRESHold? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the BUS:B<x>:USB:THRESHold value command.

SCPI Syntax

- BUS:B<x>:USB:THRESHold <NR3>
- BUS:B<x>:USB:THRESHold?

Info

B<x> is the number of the bus waveform.
<NR3> is the USB DATA source High threshold for the specified bus.

BusDelete ¶

Bases: SCPICmdWrite

The BUS:DELete command.

Description

This command deletes the specified bus.

Usage

Using the .write(value) method will send the BUS:DELete value command.

SCPI Syntax

- BUS:DELete <QString>

Info

<QString> specifies the bus to delete and is of the form ‘B‘, where is ≥1.

BusList ¶

Bases: SCPICmdRead

The BUS:LIST command.

Description

This query returns a comma separated list of all currently defined buses.

Usage

Using the .query() method will send the BUS:LIST? query.
Using the .verify(value) method will send the BUS:LIST? query and raise an AssertionError if the returned value does not match value.

SCPI Syntax

- BUS:LIST?

bus ¶

Bus ¶

addnew property ¶

b property ¶

delete property ¶

list property ¶

BusAddnew ¶

BusBItem ¶

arinc429a property ¶

audio property ¶

autoethernet property ¶

can property ¶

cphy property ¶

cxpi property ¶

display property ¶

dphy property ¶

espi property ¶

ethercat property ¶

ethernet property ¶

eusb property ¶

flexray property ¶

i2c property ¶

i3c property ¶

label property ¶

lin property ¶

manchester property ¶

mdio property ¶

mil1553b property ¶

nrz property ¶

onewire property ¶

parallel property ¶

psifive property ¶

rs232c property ¶

s8b10b property ¶

sdlc property ¶

sent property ¶

smbus property ¶

spacewire property ¶

spi property ¶

spmi property ¶

svid property ¶

type property ¶

usb property ¶

BusBItemArinc429a ¶

bitrate property ¶

dataformat property ¶

polarity property ¶

source property ¶

threshold property ¶

BusBItemArinc429aBitrate ¶

custom property ¶

BusBItemArinc429aBitrateCustom ¶

BusBItemArinc429aDataformat ¶

BusBItemArinc429aPolarity ¶

BusBItemArinc429aSource ¶

BusBItemArinc429aThreshold ¶

BusBItemAudio ¶

bitdelay property ¶

bitorder property ¶

clock property ¶

data property ¶

frame property ¶

type property ¶

wordsel property ¶

BusBItemAudioBitdelay ¶

BusBItemAudioBitorder ¶

BusBItemAudioClock ¶

polarity property ¶

source property ¶

threshold property ¶

BusBItemAudioClockPolarity ¶

BusBItemAudioClockSource ¶

BusBItemAudioClockThreshold ¶

BusBItemAudioData ¶

polarity property ¶

size property ¶

source property ¶

threshold property ¶

wordsize property ¶

BusBItemAudioDataPolarity ¶

addnew `property` ¶

b `property` ¶

delete `property` ¶

list `property` ¶

arinc429a `property` ¶

audio `property` ¶

autoethernet `property` ¶

can `property` ¶

cphy `property` ¶

cxpi `property` ¶

display `property` ¶

dphy `property` ¶

espi `property` ¶

ethercat `property` ¶

ethernet `property` ¶

eusb `property` ¶

flexray `property` ¶

i2c `property` ¶

i3c `property` ¶

label `property` ¶

lin `property` ¶

manchester `property` ¶

mdio `property` ¶

mil1553b `property` ¶

nrz `property` ¶

onewire `property` ¶

parallel `property` ¶

psifive `property` ¶

rs232c `property` ¶

s8b10b `property` ¶

sdlc `property` ¶

sent `property` ¶

smbus `property` ¶

spacewire `property` ¶

spi `property` ¶

spmi `property` ¶

svid `property` ¶

type `property` ¶

usb `property` ¶

bitrate `property` ¶

dataformat `property` ¶

polarity `property` ¶

source `property` ¶

threshold `property` ¶

custom `property` ¶

bitdelay `property` ¶

bitorder `property` ¶

clock `property` ¶

data `property` ¶

frame `property` ¶

type `property` ¶

wordsel `property` ¶

polarity `property` ¶

source `property` ¶

threshold `property` ¶

polarity `property` ¶

size `property` ¶

source `property` ¶

threshold `property` ¶

wordsize `property` ¶

clockbitsperchannel `property` ¶

size `property` ¶

polarity `property` ¶

source `property` ¶

threshold `property` ¶

dataminusthreshold `property` ¶

dataplusthreshold `property` ¶

lowdataminus `property` ¶

lowdataplus `property` ¶

lowthreshold `property` ¶

signaltype `property` ¶

source `property` ¶

threshold `property` ¶

type `property` ¶

dminus `property` ¶

dplus `property` ¶

bitrate `property` ¶

fd `property` ¶

samplepoint `property` ¶

signal `property` ¶