date ¶

The date commands module.

These commands are used in the following models: DPO2K, DPO2KB, DPO4K, DPO4KB, DPO5K, DPO5KB, DPO70KC, DPO70KD, DPO70KDX, DPO70KSX, DPO7K, DPO7KC, DSA70KC, DSA70KD, MDO3, MDO3K, MDO4K, MDO4KB, MDO4KC, MSO2K, MSO2KB, MSO4K, MSO4KB, MSO5K, MSO5KB, MSO70KC, MSO70KDX

THIS FILE IS AUTO-GENERATED, IT SHOULD NOT BE MANUALLY MODIFIED.

Please report an issue if one is found.

Commands and Queries

- DATE <QString>
- DATE?

Date ¶

Bases: SCPICmdWrite, SCPICmdRead

The DATE command.

Description

This command specifies the date the oscilloscope displays.

Usage

Using the .query() method will send the DATE? query.
Using the .verify(value) method will send the DATE? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the DATE value command.

SCPI Syntax

- DATE <QString>
- DATE?

Info

<QString> is a date in the form ‘yyyy-mm-dd’ where yyyy refers to a four-digit year number, mm refers to a two-digit month number from 01 to 12, and dd refers to a two-digit day number in the month.