[python source code]

math

The math commands module.

These commands are used in the following models: TekScopePC

THIS FILE IS AUTO-GENERATED, IT SHOULD NOT BE MANUALLY MODIFIED.

Please report an issue if one is found.

Commands and Queries 
- MATH:ADDNew <QString>
- MATH:DELete <QString>
- MATH:LIST?
- MATH:MATH<x>:ARINC429A:SUPPortedfields {DATa}
- MATH:MATH<x>:ARINC429A:SUPPortedfields?
- MATH:MATH<x>:AUDIO:SUPPortedfields {LCHannel|RCHannel|TDMChannel}
- MATH:MATH<x>:AUDIO:SUPPortedfields?
- MATH:MATH<x>:AUTOETHERnet:SUPPortedfields {DATa|IPData|TDATa}
- MATH:MATH<x>:AUTOETHERnet:SUPPortedfields?
- MATH:MATH<x>:AVG:MODE {ON|OFF|<NR1>}
- MATH:MATH<x>:AVG:WEIGht <NR1>
- MATH:MATH<x>:CAN:SUPPortedfields {DATa}
- MATH:MATH<x>:CAN:SUPPortedfields?
- MATH:MATH<x>:CXPI:SUPPortedfields {DATa}
- MATH:MATH<x>:CXPI:SUPPortedfields?
- MATH:MATH<x>:DEFine <QString>
- MATH:MATH<x>:DEFine?
- MATH:MATH<x>:ESPI:SUPPortedfields {DATa|CDATa|RDATa}
- MATH:MATH<x>:ESPI:SUPPortedfields?
- MATH:MATH<x>:ETHERCAT:SUPPortedfields {DATa|SDATa|NWVariabledata}
- MATH:MATH<x>:ETHERCAT:SUPPortedfields?
- MATH:MATH<x>:ETHERnet:SUPPortedfields {DATa|IPData|TDATa}
- MATH:MATH<x>:ETHERnet:SUPPortedfields?
- MATH:MATH<x>:EUSB:SUPPortedfields {DATa|DDATa}
- MATH:MATH<x>:EUSB:SUPPortedfields?
- MATH:MATH<x>:FILTer:CFReq <NR3>
- MATH:MATH<x>:FILTer:CFReq?
- MATH:MATH<x>:FILTer:DELay <NR3>
- MATH:MATH<x>:FILTer:DELay?
- MATH:MATH<x>:FILTer:DESIgn {EXECUTE|ABORT|APPLY}
- MATH:MATH<x>:FILTer:HCFReq <NR3>
- MATH:MATH<x>:FILTer:HCFReq?
- MATH:MATH<x>:FILTer:INFo?
- MATH:MATH<x>:FILTer:LCFReq <NR3>
- MATH:MATH<x>:FILTer:LCFReq?
- MATH:MATH<x>:FILTer:LOAD <QString>
- MATH:MATH<x>:FILTer:LOAD:RESPonse {1|0}
- MATH:MATH<x>:FILTer:LOAD:RESPonse?
- MATH:MATH<x>:FILTer:ORDer <NR1>
- MATH:MATH<x>:FILTer:ORDer?
- MATH:MATH<x>:FILTer:PRIPple <NR3>
- MATH:MATH<x>:FILTer:PRIPple?
- MATH:MATH<x>:FILTer:RESPonse {BUTTerworth|CHEBYONe|CHEBYTWo|ELLiptical|GAUSsian|BESSelCUSTom}
- MATH:MATH<x>:FILTer:ROFactor <NR3>
- MATH:MATH<x>:FILTer:ROFactor?
- MATH:MATH<x>:FILTer:SATTenuation <NR3>
- MATH:MATH<x>:FILTer:SATTenuation?
- MATH:MATH<x>:FILTer:SAVe <QString>
- MATH:MATH<x>:FILTer:SAVe:RESPonse {1|0}
- MATH:MATH<x>:FILTer:SAVe:RESPonse?
- MATH:MATH<x>:FILTer:SDEViation <NR3>
- MATH:MATH<x>:FILTer:SDEViation?
- MATH:MATH<x>:FILTer:SDURation <NR3>
- MATH:MATH<x>:FILTer:SDURation?
- MATH:MATH<x>:FILTer:SOURce {S<x>_Ch<x>|CH<x>|MATH<x>|REF<x>}
- MATH:MATH<x>:FILTer:SOURce?
- MATH:MATH<x>:FILTer:SYMBols <NR1>
- MATH:MATH<x>:FILTer:SYMBols?
- MATH:MATH<x>:FILTer:TWIDth <NR3>
- MATH:MATH<x>:FILTer:TWIDth?
- MATH:MATH<x>:FILTer:TYPe {LPASs|HPASs|BPASs|BSTop|APASs|HILBert|DIFFerentiator|RC|RRC}
- MATH:MATH<x>:FILTer:TYPe?
- MATH:MATH<x>:FLEXray:SUPPortedfields {DATa}
- MATH:MATH<x>:FLEXray:SUPPortedfields?
- MATH:MATH<x>:FUNCtion {ADD|SUBtract|MULTiply|DIVide}
- MATH:MATH<x>:GATing {NONE|SCREEN|CURSor}
- MATH:MATH<x>:GATing?
- MATH:MATH<x>:I2C:SUPPortedfields {DATa}
- MATH:MATH<x>:I2C:SUPPortedfields?
- MATH:MATH<x>:I3C:SUPPortedfields {DATa}
- MATH:MATH<x>:I3C:SUPPortedfields?
- MATH:MATH<x>:INTERpolation {ON|OFF}
- MATH:MATH<x>:LABel:COLor <QString>
- MATH:MATH<x>:LABel:FONT:BOLD {ON|OFF|<NR1>}
- MATH:MATH<x>:LABel:FONT:ITALic {ON|OFF|<NR1>}
- MATH:MATH<x>:LABel:FONT:SIZE <NR1>
- MATH:MATH<x>:LABel:FONT:TYPE <QString>
- MATH:MATH<x>:LABel:FONT:UNDERline {ON|OFF|<NR1>}
- MATH:MATH<x>:LABel:NAMe <QString>
- MATH:MATH<x>:LABel:NAMe?
- MATH:MATH<x>:LABel:XPOS <NR1>
- MATH:MATH<x>:LABel:XPOS?
- MATH:MATH<x>:LABel:YPOS <NR1>
- MATH:MATH<x>:LABel:YPOS?
- MATH:MATH<x>:LIN:SUPPortedfields {DATa}
- MATH:MATH<x>:LIN:SUPPortedfields?
- MATH:MATH<x>:MDIO:SUPPortedfields {DATa}
- MATH:MATH<x>:MDIO:SUPPortedfields?
- MATH:MATH<x>:MIL1553B:SUPPortedfields {DATa|PAYLoad}
- MATH:MATH<x>:MIL1553B:SUPPortedfields?
- MATH:MATH<x>:ONEWIRe:SUPPortedfields {DATa}
- MATH:MATH<x>:ONEWIRe:SUPPortedfields?
- MATH:MATH<x>:PARallel:SUPPortedfields {DATa}
- MATH:MATH<x>:PARallel:SUPPortedfields?
- MATH:MATH<x>:PSIFIVe:SUPPortedfields {DATa|DRA|DRB|SDATa}
- MATH:MATH<x>:PSIFIVe:SUPPortedfields?
- MATH:MATH<x>:RS232C:SUPPortedfields {DATa|TXData|RXData}
- MATH:MATH<x>:RS232C:SUPPortedfields?
- MATH:MATH<x>:SDLC:SUPPortedfields {DATa}
- MATH:MATH<x>:SDLC:SUPPortedfields?
- MATH:MATH<x>:SENT:SUPPortedfields {FCData|FCDFirst|FCDTwo|SDATa}
- MATH:MATH<x>:SENT:SUPPortedfields?
- MATH:MATH<x>:SIGNeddata {ON|OFF}
- MATH:MATH<x>:SIGNeddata?
- MATH:MATH<x>:SMBUS:SUPPortedfields {DATa}
- MATH:MATH<x>:SMBUS:SUPPortedfields?
- MATH:MATH<x>:SOUrce1 {S<x>_Ch<x>|CH<x>|MATH<x>|REF<x>}
- MATH:MATH<x>:SPACEWIRe:SUPPortedfields {DATa}
- MATH:MATH<x>:SPACEWIRe:SUPPortedfields?
- MATH:MATH<x>:SPECTral:HORZ {LOG|LINEAr}
- MATH:MATH<x>:SPECTral:HORZ?
- MATH:MATH<x>:SPECTral:MAG {LINEAr|DBM}
- MATH:MATH<x>:SPECTral:MAG?
- MATH:MATH<x>:SPECTral:PHASE {DEGrees|RADians|GROUPDelay}
- MATH:MATH<x>:SPECTral:PHASE?
- MATH:MATH<x>:SPECTral:SOUrce {S<x>_Ch<x>|CH<x>|MATH<x>|REF<x>}
- MATH:MATH<x>:SPECTral:SOUrce?
- MATH:MATH<x>:SPECTral:SUPPress {ON|OFF|1|0}
- MATH:MATH<x>:SPECTral:SUPPress:VALue <NR3>
- MATH:MATH<x>:SPECTral:SUPPress:VALue?
- MATH:MATH<x>:SPECTral:SUPPress?
- MATH:MATH<x>:SPECTral:TYPE {MAGNitude|PHASe|REAL|IMAGinary}
- MATH:MATH<x>:SPECTral:TYPE?
- MATH:MATH<x>:SPECTral:UNWRap {ON|OFF|1|0}
- MATH:MATH<x>:SPECTral:UNWRap:DEGrees <NR3>
- MATH:MATH<x>:SPECTral:UNWRap:DEGrees?
- MATH:MATH<x>:SPECTral:UNWRap?
- MATH:MATH<x>:SPECTral:WINdow {RECTANGular|HAMMing|HANNing|BLACKMANHarris|KAISERBessel|GAUSSian|FLATTOP2|TEKEXPonential}
- MATH:MATH<x>:SPECTral:WINdow?
- MATH:MATH<x>:SPI:SUPPortedfields {DATa|MOSIdata|MISOdata}
- MATH:MATH<x>:SPI:SUPPortedfields?
- MATH:MATH<x>:SPMI:SUPPortedfields {DATa|CDATa|RDATa}
- MATH:MATH<x>:SPMI:SUPPortedfields?
- MATH:MATH<x>:SVID:SUPPortedfields {MPAYload|SPAYload}
- MATH:MATH<x>:SVID:SUPPortedfields?
- MATH:MATH<x>:TYPe {BASic|FILTER|FFT|ADVanced}
- MATH:MATH<x>:USB:SUPPortedfields {DATa}
- MATH:MATH<x>:USB:SUPPortedfields?
- MATH:MATH<x>:VUNIT <QString>

Math

Bases: SCPICmdRead

The MATH command tree.

Usage
  • Using the .query() method will send the MATH? query.
  • Using the .verify(value) method will send the MATH? query and raise an AssertionError if the returned value does not match value.
Properties
  • .addnew: The MATH:ADDNew command.
  • .delete: The MATH:DELete command.
  • .list: The MATH:LIST command.
  • .math: The MATH:MATH<x> command tree.

addnew property 

addnew: MathAddnew

Return the MATH:ADDNew command.

Description
  • This command adds the specified math.
Usage
  • Using the .write(value) method will send the MATH:ADDNew value command.
SCPI Syntax 
- MATH:ADDNew <QString>
Info
  • <QString> is the quoted string specifying the math waveform to add. The argument is of the form ‘MATH‘, where is ≥1.

delete property 

delete: MathDelete

Return the MATH:DELete command.

Description
  • This command deletes the specified math.
Usage
  • Using the .write(value) method will send the MATH:DELete value command.
SCPI Syntax 
- MATH:DELete <QString>
Info
  • <QString> is a quoted string specifying the math waveform to delete. The quoted string is of the form ‘MATH‘, where is ≥1.

list property 

list: MathList

Return the MATH:LIST command.

Description
  • This query returns a comma separated list of all currently defined math waveforms.
Usage
  • Using the .query() method will send the MATH:LIST? query.
  • Using the .verify(value) method will send the MATH:LIST? query and raise an AssertionError if the returned value does not match value.
SCPI Syntax 
- MATH:LIST?

math property 

math: dict[int, MathMathItem]

Return the MATH:MATH<x> command tree.

Usage
  • Using the .query() method will send the MATH:MATH<x>? query.
  • Using the .verify(value) method will send the MATH:MATH<x>? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .arinc429a: The MATH:MATH<x>:ARINC429A command tree.
  • .audio: The MATH:MATH<x>:AUDIO command tree.
  • .autoethernet: The MATH:MATH<x>:AUTOETHERnet command tree.
  • .avg: The MATH:MATH<x>:AVG command tree.
  • .can: The MATH:MATH<x>:CAN command tree.
  • .cxpi: The MATH:MATH<x>:CXPI command tree.
  • .define: The MATH:MATH<x>:DEFine command.
  • .espi: The MATH:MATH<x>:ESPI command tree.
  • .ethercat: The MATH:MATH<x>:ETHERCAT command tree.
  • .ethernet: The MATH:MATH<x>:ETHERnet command tree.
  • .eusb: The MATH:MATH<x>:EUSB command tree.
  • .filter: The MATH:MATH<x>:FILTer command tree.
  • .flexray: The MATH:MATH<x>:FLEXray command tree.
  • .function: The MATH:MATH<x>:FUNCtion command.
  • .gating: The MATH:MATH<x>:GATing command.
  • .i2c: The MATH:MATH<x>:I2C command tree.
  • .i3c: The MATH:MATH<x>:I3C command tree.
  • .interpolation: The MATH:MATH<x>:INTERpolation command.
  • .label: The MATH:MATH<x>:LABel command tree.
  • .lin: The MATH:MATH<x>:LIN command tree.
  • .mdio: The MATH:MATH<x>:MDIO command tree.
  • .mil1553b: The MATH:MATH<x>:MIL1553B command tree.
  • .onewire: The MATH:MATH<x>:ONEWIRe command tree.
  • .parallel: The MATH:MATH<x>:PARallel command tree.
  • .psifive: The MATH:MATH<x>:PSIFIVe command tree.
  • .rs232c: The MATH:MATH<x>:RS232C command tree.
  • .sdlc: The MATH:MATH<x>:SDLC command tree.
  • .sent: The MATH:MATH<x>:SENT command tree.
  • .signeddata: The MATH:MATH<x>:SIGNeddata command.
  • .smbus: The MATH:MATH<x>:SMBUS command tree.
  • .source1: The MATH:MATH<x>:SOUrce1 command.
  • .spacewire: The MATH:MATH<x>:SPACEWIRe command tree.
  • .spectral: The MATH:MATH<x>:SPECTral command tree.
  • .spi: The MATH:MATH<x>:SPI command tree.
  • .spmi: The MATH:MATH<x>:SPMI command tree.
  • .svid: The MATH:MATH<x>:SVID command tree.
  • .type: The MATH:MATH<x>:TYPe command.
  • .usb: The MATH:MATH<x>:USB command tree.
  • .vunit: The MATH:MATH<x>:VUNIT command.

MathAddnew

Bases: SCPICmdWrite

The MATH:ADDNew command.

Description
  • This command adds the specified math.
Usage
  • Using the .write(value) method will send the MATH:ADDNew value command.
SCPI Syntax 
- MATH:ADDNew <QString>
Info
  • <QString> is the quoted string specifying the math waveform to add. The argument is of the form ‘MATH‘, where is ≥1.

MathDelete

Bases: SCPICmdWrite

The MATH:DELete command.

Description
  • This command deletes the specified math.
Usage
  • Using the .write(value) method will send the MATH:DELete value command.
SCPI Syntax 
- MATH:DELete <QString>
Info
  • <QString> is a quoted string specifying the math waveform to delete. The quoted string is of the form ‘MATH‘, where is ≥1.

MathList

Bases: SCPICmdRead

The MATH:LIST command.

Description
  • This query returns a comma separated list of all currently defined math waveforms.
Usage
  • Using the .query() method will send the MATH:LIST? query.
  • Using the .verify(value) method will send the MATH:LIST? query and raise an AssertionError if the returned value does not match value.
SCPI Syntax 
- MATH:LIST?

MathMathItem

Bases: ValidatedDynamicNumberCmd, SCPICmdRead

The MATH:MATH<x> command tree.

Usage
  • Using the .query() method will send the MATH:MATH<x>? query.
  • Using the .verify(value) method will send the MATH:MATH<x>? query and raise an AssertionError if the returned value does not match value.
Properties
  • .arinc429a: The MATH:MATH<x>:ARINC429A command tree.
  • .audio: The MATH:MATH<x>:AUDIO command tree.
  • .autoethernet: The MATH:MATH<x>:AUTOETHERnet command tree.
  • .avg: The MATH:MATH<x>:AVG command tree.
  • .can: The MATH:MATH<x>:CAN command tree.
  • .cxpi: The MATH:MATH<x>:CXPI command tree.
  • .define: The MATH:MATH<x>:DEFine command.
  • .espi: The MATH:MATH<x>:ESPI command tree.
  • .ethercat: The MATH:MATH<x>:ETHERCAT command tree.
  • .ethernet: The MATH:MATH<x>:ETHERnet command tree.
  • .eusb: The MATH:MATH<x>:EUSB command tree.
  • .filter: The MATH:MATH<x>:FILTer command tree.
  • .flexray: The MATH:MATH<x>:FLEXray command tree.
  • .function: The MATH:MATH<x>:FUNCtion command.
  • .gating: The MATH:MATH<x>:GATing command.
  • .i2c: The MATH:MATH<x>:I2C command tree.
  • .i3c: The MATH:MATH<x>:I3C command tree.
  • .interpolation: The MATH:MATH<x>:INTERpolation command.
  • .label: The MATH:MATH<x>:LABel command tree.
  • .lin: The MATH:MATH<x>:LIN command tree.
  • .mdio: The MATH:MATH<x>:MDIO command tree.
  • .mil1553b: The MATH:MATH<x>:MIL1553B command tree.
  • .onewire: The MATH:MATH<x>:ONEWIRe command tree.
  • .parallel: The MATH:MATH<x>:PARallel command tree.
  • .psifive: The MATH:MATH<x>:PSIFIVe command tree.
  • .rs232c: The MATH:MATH<x>:RS232C command tree.
  • .sdlc: The MATH:MATH<x>:SDLC command tree.
  • .sent: The MATH:MATH<x>:SENT command tree.
  • .signeddata: The MATH:MATH<x>:SIGNeddata command.
  • .smbus: The MATH:MATH<x>:SMBUS command tree.
  • .source1: The MATH:MATH<x>:SOUrce1 command.
  • .spacewire: The MATH:MATH<x>:SPACEWIRe command tree.
  • .spectral: The MATH:MATH<x>:SPECTral command tree.
  • .spi: The MATH:MATH<x>:SPI command tree.
  • .spmi: The MATH:MATH<x>:SPMI command tree.
  • .svid: The MATH:MATH<x>:SVID command tree.
  • .type: The MATH:MATH<x>:TYPe command.
  • .usb: The MATH:MATH<x>:USB command tree.
  • .vunit: The MATH:MATH<x>:VUNIT command.

arinc429a property 

arinc429a: MathMathItemArinc429a

Return the MATH:MATH<x>:ARINC429A command tree.

Usage
  • Using the .query() method will send the MATH:MATH<x>:ARINC429A? query.
  • Using the .verify(value) method will send the MATH:MATH<x>:ARINC429A? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .supportedfields: The MATH:MATH<x>:ARINC429A:SUPPortedfields command.

audio property 

audio: MathMathItemAudio

Return the MATH:MATH<x>:AUDIO command tree.

Usage
  • Using the .query() method will send the MATH:MATH<x>:AUDIO? query.
  • Using the .verify(value) method will send the MATH:MATH<x>:AUDIO? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .supportedfields: The MATH:MATH<x>:AUDIO:SUPPortedfields command.

autoethernet property 

autoethernet: MathMathItemAutoethernet

Return the MATH:MATH<x>:AUTOETHERnet command tree.

Usage
  • Using the .query() method will send the MATH:MATH<x>:AUTOETHERnet? query.
  • Using the .verify(value) method will send the MATH:MATH<x>:AUTOETHERnet? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .supportedfields: The MATH:MATH<x>:AUTOETHERnet:SUPPortedfields command.

avg property 

avg: MathMathItemAvg

Return the MATH:MATH<x>:AVG command tree.

Usage
  • Using the .query() method will send the MATH:MATH<x>:AVG? query.
  • Using the .verify(value) method will send the MATH:MATH<x>:AVG? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .mode: The MATH:MATH<x>:AVG:MODE command.
  • .weight: The MATH:MATH<x>:AVG:WEIGht command.

can property 

can: MathMathItemCan

Return the MATH:MATH<x>:CAN command tree.

Usage
  • Using the .query() method will send the MATH:MATH<x>:CAN? query.
  • Using the .verify(value) method will send the MATH:MATH<x>:CAN? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .supportedfields: The MATH:MATH<x>:CAN:SUPPortedfields command.

cxpi property 

cxpi: MathMathItemCxpi

Return the MATH:MATH<x>:CXPI command tree.

Usage
  • Using the .query() method will send the MATH:MATH<x>:CXPI? query.
  • Using the .verify(value) method will send the MATH:MATH<x>:CXPI? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .supportedfields: The MATH:MATH<x>:CXPI:SUPPortedfields command.

define property 

define: MathMathItemDefine

Return the MATH:MATH<x>:DEFine command.

Description
  • This command allows you to define new waveforms using mathematical expressions. The query form of this command returns the math definition for the specified math waveform. The math waveform is specified by x. You can specify a math expression from waveforms, measurements and scalar sources, functions, operands, and numerical constants. Math expressions can be simple, such as Ch1, which specifies that a waveform should show the signal source of Channel 1 with no mathematical computation. Math expressions can also be complex, consisting of 100 plus characters and comprising many sources (including other math waveforms), functions, and operands. As an example, you can enter the expression Log(Ch1+Ch2), which specifies that the signals from channels 1 and 2 are to be algebraically added, and the base 10 log of the sum is to be shown as the final math waveform.
Usage
  • Using the .query() method will send the MATH:MATH<x>:DEFine? query.
  • Using the .verify(value) method will send the MATH:MATH<x>:DEFine? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the MATH:MATH<x>:DEFine value command.
SCPI Syntax 
- MATH:MATH<x>:DEFine <QString>
- MATH:MATH<x>:DEFine?
Info
  • <QString> quoted string argument is the mathematical expression that defines the waveform. MATH:MATH<x>:DEFINE? is for use when the MATH:MATH<x>:TYPE is ADVANCED.

espi property 

espi: MathMathItemEspi

Return the MATH:MATH<x>:ESPI command tree.

Usage
  • Using the .query() method will send the MATH:MATH<x>:ESPI? query.
  • Using the .verify(value) method will send the MATH:MATH<x>:ESPI? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .supportedfields: The MATH:MATH<x>:ESPI:SUPPortedfields command.

ethercat property 

ethercat: MathMathItemEthercat

Return the MATH:MATH<x>:ETHERCAT command tree.

Usage
  • Using the .query() method will send the MATH:MATH<x>:ETHERCAT? query.
  • Using the .verify(value) method will send the MATH:MATH<x>:ETHERCAT? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .supportedfields: The MATH:MATH<x>:ETHERCAT:SUPPortedfields command.

ethernet property 

ethernet: MathMathItemEthernet

Return the MATH:MATH<x>:ETHERnet command tree.

Usage
  • Using the .query() method will send the MATH:MATH<x>:ETHERnet? query.
  • Using the .verify(value) method will send the MATH:MATH<x>:ETHERnet? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .supportedfields: The MATH:MATH<x>:ETHERnet:SUPPortedfields command.

eusb property 

eusb: MathMathItemEusb

Return the MATH:MATH<x>:EUSB command tree.

Usage
  • Using the .query() method will send the MATH:MATH<x>:EUSB? query.
  • Using the .verify(value) method will send the MATH:MATH<x>:EUSB? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .supportedfields: The MATH:MATH<x>:EUSB:SUPPortedfields command.

filter property 

filter: MathMathItemFilter

Return the MATH:MATH<x>:FILTer command tree.

Usage
  • Using the .query() method will send the MATH:MATH<x>:FILTer? query.
  • Using the .verify(value) method will send the MATH:MATH<x>:FILTer? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .cfreq: The MATH:MATH<x>:FILTer:CFReq command.
  • .delay: The MATH:MATH<x>:FILTer:DELay command.
  • .design: The MATH:MATH<x>:FILTer:DESIgn command.
  • .hcfreq: The MATH:MATH<x>:FILTer:HCFReq command.
  • .info: The MATH:MATH<x>:FILTer:INFo command.
  • .lcfreq: The MATH:MATH<x>:FILTer:LCFReq command.
  • .load: The MATH:MATH<x>:FILTer:LOAD command.
  • .order: The MATH:MATH<x>:FILTer:ORDer command.
  • .pripple: The MATH:MATH<x>:FILTer:PRIPple command.
  • .response: The MATH:MATH<x>:FILTer:RESPonse command.
  • .rofactor: The MATH:MATH<x>:FILTer:ROFactor command.
  • .sattenuation: The MATH:MATH<x>:FILTer:SATTenuation command.
  • .save: The MATH:MATH<x>:FILTer:SAVe command.
  • .sdeviation: The MATH:MATH<x>:FILTer:SDEViation command.
  • .sduration: The MATH:MATH<x>:FILTer:SDURation command.
  • .source: The MATH:MATH<x>:FILTer:SOURce command.
  • .symbols: The MATH:MATH<x>:FILTer:SYMBols command.
  • .twidth: The MATH:MATH<x>:FILTer:TWIDth command.
  • .type: The MATH:MATH<x>:FILTer:TYPe command.

flexray property 

flexray: MathMathItemFlexray

Return the MATH:MATH<x>:FLEXray command tree.

Usage
  • Using the .query() method will send the MATH:MATH<x>:FLEXray? query.
  • Using the .verify(value) method will send the MATH:MATH<x>:FLEXray? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .supportedfields: The MATH:MATH<x>:FLEXray:SUPPortedfields command.

function property 

function: MathMathItemFunction

Return the MATH:MATH<x>:FUNCtion command.

Description
  • This command sets or queries the basic math arithmetic function. The math waveform is specified by x.
Usage
  • Using the .write(value) method will send the MATH:MATH<x>:FUNCtion value command.
SCPI Syntax 
- MATH:MATH<x>:FUNCtion {ADD|SUBtract|MULTiply|DIVide}
Info
  • ADD sets the basic math function to add.
  • SUBtract sets the basic math function to subtract.
  • MULTiply sets the basic math function to multiply.
  • DIVide sets the basic math function to divide.

gating property 

gating: MathMathItemGating

Return the MATH:MATH<x>:GATing command.

Description
  • This command specifies or returns the gating setting. It only applies to Math FFT plots. The math waveform is specified by x.
Usage
  • Using the .query() method will send the MATH:MATH<x>:GATing? query.
  • Using the .verify(value) method will send the MATH:MATH<x>:GATing? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the MATH:MATH<x>:GATing value command.
SCPI Syntax 
- MATH:MATH<x>:GATing {NONE|SCREEN|CURSor}
- MATH:MATH<x>:GATing?
Info
  • NONE turns off math gating.
  • SCREEN turns on gating, using the left and right edges of the screen.
  • CURSor limits math to the portion of the waveform between the vertical bar cursors, even if they are off screen.

i2c property 

i2c: MathMathItemI2c

Return the MATH:MATH<x>:I2C command tree.

Usage
  • Using the .query() method will send the MATH:MATH<x>:I2C? query.
  • Using the .verify(value) method will send the MATH:MATH<x>:I2C? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .supportedfields: The MATH:MATH<x>:I2C:SUPPortedfields command.

i3c property 

i3c: MathMathItemI3c

Return the MATH:MATH<x>:I3C command tree.

Usage
  • Using the .query() method will send the MATH:MATH<x>:I3C? query.
  • Using the .verify(value) method will send the MATH:MATH<x>:I3C? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .supportedfields: The MATH:MATH<x>:I3C:SUPPortedfields command.

interpolation property 

interpolation: MathMathItemInterpolation

Return the MATH:MATH<x>:INTERpolation command.

Description
  • This command sets or queries whether sinc interpolation is enabled for math on bus source. The math waveform is specified by x.
Usage
  • Using the .write(value) method will send the MATH:MATH<x>:INTERpolation value command.
SCPI Syntax 
- MATH:MATH<x>:INTERpolation {ON|OFF}
Info
  • ON indicates that the sinc interpolation is used for math waveform.
  • OFF indicates no interpolation is used for math waveform. Waveform will appear ‘stair-steppy’ in this case.

label property 

label: MathMathItemLabel

Return the MATH:MATH<x>:LABel command tree.

Usage
  • Using the .query() method will send the MATH:MATH<x>:LABel? query.
  • Using the .verify(value) method will send the MATH:MATH<x>:LABel? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .color: The MATH:MATH<x>:LABel:COLor command.
  • .font: The MATH:MATH<x>:LABel:FONT command tree.
  • .name: The MATH:MATH<x>:LABel:NAMe command.
  • .xpos: The MATH:MATH<x>:LABel:XPOS command.
  • .ypos: The MATH:MATH<x>:LABel:YPOS command.

lin property 

lin: MathMathItemLin

Return the MATH:MATH<x>:LIN command tree.

Usage
  • Using the .query() method will send the MATH:MATH<x>:LIN? query.
  • Using the .verify(value) method will send the MATH:MATH<x>:LIN? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .supportedfields: The MATH:MATH<x>:LIN:SUPPortedfields command.

mdio property 

mdio: MathMathItemMdio

Return the MATH:MATH<x>:MDIO command tree.

Usage
  • Using the .query() method will send the MATH:MATH<x>:MDIO? query.
  • Using the .verify(value) method will send the MATH:MATH<x>:MDIO? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .supportedfields: The MATH:MATH<x>:MDIO:SUPPortedfields command.

mil1553b property 

mil1553b: MathMathItemMil1553b

Return the MATH:MATH<x>:MIL1553B command tree.

Usage
  • Using the .query() method will send the MATH:MATH<x>:MIL1553B? query.
  • Using the .verify(value) method will send the MATH:MATH<x>:MIL1553B? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .supportedfields: The MATH:MATH<x>:MIL1553B:SUPPortedfields command.

onewire property 

onewire: MathMathItemOnewire

Return the MATH:MATH<x>:ONEWIRe command tree.

Usage
  • Using the .query() method will send the MATH:MATH<x>:ONEWIRe? query.
  • Using the .verify(value) method will send the MATH:MATH<x>:ONEWIRe? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .supportedfields: The MATH:MATH<x>:ONEWIRe:SUPPortedfields command.

parallel property 

parallel: MathMathItemParallel

Return the MATH:MATH<x>:PARallel command tree.

Usage
  • Using the .query() method will send the MATH:MATH<x>:PARallel? query.
  • Using the .verify(value) method will send the MATH:MATH<x>:PARallel? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .supportedfields: The MATH:MATH<x>:PARallel:SUPPortedfields command.

psifive property 

psifive: MathMathItemPsifive

Return the MATH:MATH<x>:PSIFIVe command tree.

Usage
  • Using the .query() method will send the MATH:MATH<x>:PSIFIVe? query.
  • Using the .verify(value) method will send the MATH:MATH<x>:PSIFIVe? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .supportedfields: The MATH:MATH<x>:PSIFIVe:SUPPortedfields command.

rs232c property 

rs232c: MathMathItemRs232c

Return the MATH:MATH<x>:RS232C command tree.

Usage
  • Using the .query() method will send the MATH:MATH<x>:RS232C? query.
  • Using the .verify(value) method will send the MATH:MATH<x>:RS232C? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .supportedfields: The MATH:MATH<x>:RS232C:SUPPortedfields command.

sdlc property 

sdlc: MathMathItemSdlc

Return the MATH:MATH<x>:SDLC command tree.

Usage
  • Using the .query() method will send the MATH:MATH<x>:SDLC? query.
  • Using the .verify(value) method will send the MATH:MATH<x>:SDLC? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .supportedfields: The MATH:MATH<x>:SDLC:SUPPortedfields command.

sent property 

sent: MathMathItemSent

Return the MATH:MATH<x>:SENT command tree.

Usage
  • Using the .query() method will send the MATH:MATH<x>:SENT? query.
  • Using the .verify(value) method will send the MATH:MATH<x>:SENT? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .supportedfields: The MATH:MATH<x>:SENT:SUPPortedfields command.

signeddata property 

signeddata: MathMathItemSigneddata

Return the MATH:MATH<x>:SIGNeddata command.

Description
  • This command sets or queries value to denote that bus field is decoded as signed/unsigned data for math on bus source. The math waveform is specified by x.
Usage
  • Using the .query() method will send the MATH:MATH<x>:SIGNeddata? query.
  • Using the .verify(value) method will send the MATH:MATH<x>:SIGNeddata? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the MATH:MATH<x>:SIGNeddata value command.
SCPI Syntax 
- MATH:MATH<x>:SIGNeddata {ON|OFF}
- MATH:MATH<x>:SIGNeddata?
Info
  • ON indicates that the bus field is decoded as signed data for drawing the math waveform.
  • OFF indicates that the bus field is decoded as unsigned data for drawing the math waveform.

smbus property 

smbus: MathMathItemSmbus

Return the MATH:MATH<x>:SMBUS command tree.

Usage
  • Using the .query() method will send the MATH:MATH<x>:SMBUS? query.
  • Using the .verify(value) method will send the MATH:MATH<x>:SMBUS? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .supportedfields: The MATH:MATH<x>:SMBUS:SUPPortedfields command.

source1 property 

source1: MathMathItemSource1

Return the MATH:MATH<x>:SOUrce1 command.

Description
  • This command sets or queries the specified math source. The source in the command can be either 1 or 2. This command sets the Basic Math components in the user interface, with two sources and a function. You would also need to set the math type to Basic to see the change in the user interface but this will not effect the programmable interface. The math waveform and source are specified by x. SOURCE1 and SOURCE2 are for use when the MATH:MATH<x>:TYPE is BASIC.
Usage
  • Using the .write(value) method will send the MATH:MATH<x>:SOUrce1 value command.
SCPI Syntax 
- MATH:MATH<x>:SOUrce1 {S<x>_Ch<x>|CH<x>|MATH<x>|REF<x>}
Info
  • S<x>_Ch<x> specifies the remote scope number and the analog channel as the source.
  • CH<x> specifies an analog channel as the source.
  • Math<x> specifies a math waveform as the source.
  • REF<x> specifies a reference waveform as the source.

spacewire property 

spacewire: MathMathItemSpacewire

Return the MATH:MATH<x>:SPACEWIRe command tree.

Usage
  • Using the .query() method will send the MATH:MATH<x>:SPACEWIRe? query.
  • Using the .verify(value) method will send the MATH:MATH<x>:SPACEWIRe? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .supportedfields: The MATH:MATH<x>:SPACEWIRe:SUPPortedfields command.

spectral property 

spectral: MathMathItemSpectral

Return the MATH:MATH<x>:SPECTral command tree.

Usage
  • Using the .query() method will send the MATH:MATH<x>:SPECTral? query.
  • Using the .verify(value) method will send the MATH:MATH<x>:SPECTral? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .horz: The MATH:MATH<x>:SPECTral:HORZ command.
  • .mag: The MATH:MATH<x>:SPECTral:MAG command.
  • .phase: The MATH:MATH<x>:SPECTral:PHASE command.
  • .source: The MATH:MATH<x>:SPECTral:SOUrce command.
  • .suppress: The MATH:MATH<x>:SPECTral:SUPPress command.
  • .type: The MATH:MATH<x>:SPECTral:TYPE command.
  • .unwrap: The MATH:MATH<x>:SPECTral:UNWRap command.
  • .window: The MATH:MATH<x>:SPECTral:WINdow command.

spi property 

spi: MathMathItemSpi

Return the MATH:MATH<x>:SPI command tree.

Usage
  • Using the .query() method will send the MATH:MATH<x>:SPI? query.
  • Using the .verify(value) method will send the MATH:MATH<x>:SPI? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .supportedfields: The MATH:MATH<x>:SPI:SUPPortedfields command.

spmi property 

spmi: MathMathItemSpmi

Return the MATH:MATH<x>:SPMI command tree.

Usage
  • Using the .query() method will send the MATH:MATH<x>:SPMI? query.
  • Using the .verify(value) method will send the MATH:MATH<x>:SPMI? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .supportedfields: The MATH:MATH<x>:SPMI:SUPPortedfields command.

svid property 

svid: MathMathItemSvid

Return the MATH:MATH<x>:SVID command tree.

Usage
  • Using the .query() method will send the MATH:MATH<x>:SVID? query.
  • Using the .verify(value) method will send the MATH:MATH<x>:SVID? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .supportedfields: The MATH:MATH<x>:SVID:SUPPortedfields command.

type property 

type: MathMathItemType

Return the MATH:MATH<x>:TYPe command.

Description
  • This command sets or queries the math type. The math waveform is specified by x.
Usage
  • Using the .write(value) method will send the MATH:MATH<x>:TYPe value command.
SCPI Syntax 
- MATH:MATH<x>:TYPe {BASic|FILTER|FFT|ADVanced}
Info
  • BASic set the type to basic math.
  • FILTER sets the math type to filter. Requires UDFLT licenses on 5, 6 series MSO instruments and Tekscope (Offline).
  • FFT sets the type to FFT math, which can use any live analog or reference waveform in the time domain. NOTE. You can also use FFT as part of a math expression by declaring the type.
  • ADVanced sets the type to advanced math.

usb property 

usb: MathMathItemUsb

Return the MATH:MATH<x>:USB command tree.

Usage
  • Using the .query() method will send the MATH:MATH<x>:USB? query.
  • Using the .verify(value) method will send the MATH:MATH<x>:USB? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .supportedfields: The MATH:MATH<x>:USB:SUPPortedfields command.

vunit property 

vunit: MathMathItemVunit

Return the MATH:MATH<x>:VUNIT command.

Description
  • This command specifies or returns the math custom vertical units. The math waveform is specified by x.
Usage
  • Using the .write(value) method will send the MATH:MATH<x>:VUNIT value command.
SCPI Syntax 
- MATH:MATH<x>:VUNIT <QString>
Info
  • <QString> is the custom vertical units.

MathMathItemArinc429a

Bases: SCPICmdRead

The MATH:MATH<x>:ARINC429A command tree.

Usage
  • Using the .query() method will send the MATH:MATH<x>:ARINC429A? query.
  • Using the .verify(value) method will send the MATH:MATH<x>:ARINC429A? query and raise an AssertionError if the returned value does not match value.
Properties
  • .supportedfields: The MATH:MATH<x>:ARINC429A:SUPPortedfields command.

supportedfields property 

supportedfields: MathMathItemArinc429aSupportedfields

Return the MATH:MATH<x>:ARINC429A:SUPPortedfields command.

Description
  • This command sets or queries the field type for the math for the bus source for ARINC429A bus. The math waveform is specified by x.
Usage
  • Using the .query() method will send the MATH:MATH<x>:ARINC429A:SUPPortedfields? query.
  • Using the .verify(value) method will send the MATH:MATH<x>:ARINC429A:SUPPortedfields? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the MATH:MATH<x>:ARINC429A:SUPPortedfields value command.
SCPI Syntax 
- MATH:MATH<x>:ARINC429A:SUPPortedfields {DATa}
- MATH:MATH<x>:ARINC429A:SUPPortedfields?
Info
  • DATa sets the field type to DATa.

MathMathItemArinc429aSupportedfields

Bases: SCPICmdWrite, SCPICmdRead

The MATH:MATH<x>:ARINC429A:SUPPortedfields command.

Description
  • This command sets or queries the field type for the math for the bus source for ARINC429A bus. The math waveform is specified by x.
Usage
  • Using the .query() method will send the MATH:MATH<x>:ARINC429A:SUPPortedfields? query.
  • Using the .verify(value) method will send the MATH:MATH<x>:ARINC429A:SUPPortedfields? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the MATH:MATH<x>:ARINC429A:SUPPortedfields value command.
SCPI Syntax 
- MATH:MATH<x>:ARINC429A:SUPPortedfields {DATa}
- MATH:MATH<x>:ARINC429A:SUPPortedfields?
Info
  • DATa sets the field type to DATa.

MathMathItemAudio

Bases: SCPICmdRead

The MATH:MATH<x>:AUDIO command tree.

Usage
  • Using the .query() method will send the MATH:MATH<x>:AUDIO? query.
  • Using the .verify(value) method will send the MATH:MATH<x>:AUDIO? query and raise an AssertionError if the returned value does not match value.
Properties
  • .supportedfields: The MATH:MATH<x>:AUDIO:SUPPortedfields command.

supportedfields property 

supportedfields: MathMathItemAudioSupportedfields

Return the MATH:MATH<x>:AUDIO:SUPPortedfields command.

Description
  • This command sets or queries the field type for the math for the bus source for Audio bus. The math waveform is specified by x.
Usage
  • Using the .query() method will send the MATH:MATH<x>:AUDIO:SUPPortedfields? query.
  • Using the .verify(value) method will send the MATH:MATH<x>:AUDIO:SUPPortedfields? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the MATH:MATH<x>:AUDIO:SUPPortedfields value command.
SCPI Syntax 
- MATH:MATH<x>:AUDIO:SUPPortedfields {LCHannel|RCHannel|TDMChannel}
- MATH:MATH<x>:AUDIO:SUPPortedfields?
Info
  • LCHannel sets the field type to LCHannel.
  • RCHannel sets the field type to RCHannel.
  • TDMChannel sets the field type to TDMChannel.

MathMathItemAudioSupportedfields

Bases: SCPICmdWrite, SCPICmdRead

The MATH:MATH<x>:AUDIO:SUPPortedfields command.

Description
  • This command sets or queries the field type for the math for the bus source for Audio bus. The math waveform is specified by x.
Usage
  • Using the .query() method will send the MATH:MATH<x>:AUDIO:SUPPortedfields? query.
  • Using the .verify(value) method will send the MATH:MATH<x>:AUDIO:SUPPortedfields? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the MATH:MATH<x>:AUDIO:SUPPortedfields value command.
SCPI Syntax 
- MATH:MATH<x>:AUDIO:SUPPortedfields {LCHannel|RCHannel|TDMChannel}
- MATH:MATH<x>:AUDIO:SUPPortedfields?
Info
  • LCHannel sets the field type to LCHannel.
  • RCHannel sets the field type to RCHannel.
  • TDMChannel sets the field type to TDMChannel.

MathMathItemAutoethernet

Bases: SCPICmdRead

The MATH:MATH<x>:AUTOETHERnet command tree.

Usage
  • Using the .query() method will send the MATH:MATH<x>:AUTOETHERnet? query.
  • Using the .verify(value) method will send the MATH:MATH<x>:AUTOETHERnet? query and raise an AssertionError if the returned value does not match value.
Properties
  • .supportedfields: The MATH:MATH<x>:AUTOETHERnet:SUPPortedfields command.

supportedfields property 

supportedfields: MathMathItemAutoethernetSupportedfields

Return the MATH:MATH<x>:AUTOETHERnet:SUPPortedfields command.

Description
  • This command sets or queries the field type for the math for the bus source for AUTOETHERnet bus. The math waveform is specified by x.
Usage
  • Using the .query() method will send the MATH:MATH<x>:AUTOETHERnet:SUPPortedfields? query.
  • Using the .verify(value) method will send the MATH:MATH<x>:AUTOETHERnet:SUPPortedfields? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the MATH:MATH<x>:AUTOETHERnet:SUPPortedfields value command.
SCPI Syntax 
- MATH:MATH<x>:AUTOETHERnet:SUPPortedfields {DATa|IPData|TDATa}
- MATH:MATH<x>:AUTOETHERnet:SUPPortedfields?
Info
  • DATa sets the field type to DATa.
  • IPData sets the field type to IPData.
  • TDATa sets the field type to TDATa.

MathMathItemAutoethernetSupportedfields

Bases: SCPICmdWrite, SCPICmdRead

The MATH:MATH<x>:AUTOETHERnet:SUPPortedfields command.

Description
  • This command sets or queries the field type for the math for the bus source for AUTOETHERnet bus. The math waveform is specified by x.
Usage
  • Using the .query() method will send the MATH:MATH<x>:AUTOETHERnet:SUPPortedfields? query.
  • Using the .verify(value) method will send the MATH:MATH<x>:AUTOETHERnet:SUPPortedfields? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the MATH:MATH<x>:AUTOETHERnet:SUPPortedfields value command.
SCPI Syntax 
- MATH:MATH<x>:AUTOETHERnet:SUPPortedfields {DATa|IPData|TDATa}
- MATH:MATH<x>:AUTOETHERnet:SUPPortedfields?
Info
  • DATa sets the field type to DATa.
  • IPData sets the field type to IPData.
  • TDATa sets the field type to TDATa.

MathMathItemAvg

Bases: SCPICmdRead

The MATH:MATH<x>:AVG command tree.

Usage
  • Using the .query() method will send the MATH:MATH<x>:AVG? query.
  • Using the .verify(value) method will send the MATH:MATH<x>:AVG? query and raise an AssertionError if the returned value does not match value.
Properties
  • .mode: The MATH:MATH<x>:AVG:MODE command.
  • .weight: The MATH:MATH<x>:AVG:WEIGht command.

mode property 

mode: MathMathItemAvgMode

Return the MATH:MATH<x>:AVG:MODE command.

Description
  • This command sets or queries the math average mode flag. If the flag is set to 1, math averaging is turned on. The math waveform is specified by x.
Usage
  • Using the .write(value) method will send the MATH:MATH<x>:AVG:MODE value command.
SCPI Syntax 
- MATH:MATH<x>:AVG:MODE {ON|OFF|<NR1>}
Info
  • <NR1> = 0 turns off average mode, and any other integer turns on average mode.
  • OFF turns off average mode.
  • ON turns on average mode.

weight property 

weight: MathMathItemAvgWeight

Return the MATH:MATH<x>:AVG:WEIGht command.

Description
  • This command sets or queries the number of acquisitions at which the averaging algorithm will begin exponential averaging. The math waveform is specified by x.
Usage
  • Using the .write(value) method will send the MATH:MATH<x>:AVG:WEIGht value command.
SCPI Syntax 
- MATH:MATH<x>:AVG:WEIGht <NR1>
Info
  • <NR1> is the number of acquisitions at which the averaging algorithm will begin exponential averaging.

MathMathItemAvgMode

Bases: SCPICmdWrite

The MATH:MATH<x>:AVG:MODE command.

Description
  • This command sets or queries the math average mode flag. If the flag is set to 1, math averaging is turned on. The math waveform is specified by x.
Usage
  • Using the .write(value) method will send the MATH:MATH<x>:AVG:MODE value command.
SCPI Syntax 
- MATH:MATH<x>:AVG:MODE {ON|OFF|<NR1>}
Info
  • <NR1> = 0 turns off average mode, and any other integer turns on average mode.
  • OFF turns off average mode.
  • ON turns on average mode.

MathMathItemAvgWeight

Bases: SCPICmdWrite

The MATH:MATH<x>:AVG:WEIGht command.

Description
  • This command sets or queries the number of acquisitions at which the averaging algorithm will begin exponential averaging. The math waveform is specified by x.
Usage
  • Using the .write(value) method will send the MATH:MATH<x>:AVG:WEIGht value command.
SCPI Syntax 
- MATH:MATH<x>:AVG:WEIGht <NR1>
Info
  • <NR1> is the number of acquisitions at which the averaging algorithm will begin exponential averaging.

MathMathItemCan

Bases: SCPICmdRead

The MATH:MATH<x>:CAN command tree.

Usage
  • Using the .query() method will send the MATH:MATH<x>:CAN? query.
  • Using the .verify(value) method will send the MATH:MATH<x>:CAN? query and raise an AssertionError if the returned value does not match value.
Properties
  • .supportedfields: The MATH:MATH<x>:CAN:SUPPortedfields command.

supportedfields property 

supportedfields: MathMathItemCanSupportedfields

Return the MATH:MATH<x>:CAN:SUPPortedfields command.

Description
  • This command sets or queries the field type for the math for the bus source for CAN bus. The math waveform is specified by x.
Usage
  • Using the .query() method will send the MATH:MATH<x>:CAN:SUPPortedfields? query.
  • Using the .verify(value) method will send the MATH:MATH<x>:CAN:SUPPortedfields? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the MATH:MATH<x>:CAN:SUPPortedfields value command.
SCPI Syntax 
- MATH:MATH<x>:CAN:SUPPortedfields {DATa}
- MATH:MATH<x>:CAN:SUPPortedfields?
Info
  • DATa sets the field type to DATa.

MathMathItemCanSupportedfields

Bases: SCPICmdWrite, SCPICmdRead

The MATH:MATH<x>:CAN:SUPPortedfields command.

Description
  • This command sets or queries the field type for the math for the bus source for CAN bus. The math waveform is specified by x.
Usage
  • Using the .query() method will send the MATH:MATH<x>:CAN:SUPPortedfields? query.
  • Using the .verify(value) method will send the MATH:MATH<x>:CAN:SUPPortedfields? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the MATH:MATH<x>:CAN:SUPPortedfields value command.
SCPI Syntax 
- MATH:MATH<x>:CAN:SUPPortedfields {DATa}
- MATH:MATH<x>:CAN:SUPPortedfields?
Info
  • DATa sets the field type to DATa.

MathMathItemCxpi

Bases: SCPICmdRead

The MATH:MATH<x>:CXPI command tree.

Usage
  • Using the .query() method will send the MATH:MATH<x>:CXPI? query.
  • Using the .verify(value) method will send the MATH:MATH<x>:CXPI? query and raise an AssertionError if the returned value does not match value.
Properties
  • .supportedfields: The MATH:MATH<x>:CXPI:SUPPortedfields command.

supportedfields property 

supportedfields: MathMathItemCxpiSupportedfields

Return the MATH:MATH<x>:CXPI:SUPPortedfields command.

Description
  • This command sets or queries the field type for the math for the bus source for CXPI bus. The math waveform is specified by x.
Usage
  • Using the .query() method will send the MATH:MATH<x>:CXPI:SUPPortedfields? query.
  • Using the .verify(value) method will send the MATH:MATH<x>:CXPI:SUPPortedfields? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the MATH:MATH<x>:CXPI:SUPPortedfields value command.
SCPI Syntax 
- MATH:MATH<x>:CXPI:SUPPortedfields {DATa}
- MATH:MATH<x>:CXPI:SUPPortedfields?
Info
  • DATa sets the field type to DATa.

MathMathItemCxpiSupportedfields

Bases: SCPICmdWrite, SCPICmdRead

The MATH:MATH<x>:CXPI:SUPPortedfields command.

Description
  • This command sets or queries the field type for the math for the bus source for CXPI bus. The math waveform is specified by x.
Usage
  • Using the .query() method will send the MATH:MATH<x>:CXPI:SUPPortedfields? query.
  • Using the .verify(value) method will send the MATH:MATH<x>:CXPI:SUPPortedfields? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the MATH:MATH<x>:CXPI:SUPPortedfields value command.
SCPI Syntax 
- MATH:MATH<x>:CXPI:SUPPortedfields {DATa}
- MATH:MATH<x>:CXPI:SUPPortedfields?
Info
  • DATa sets the field type to DATa.

MathMathItemDefine

Bases: SCPICmdWrite, SCPICmdRead

The MATH:MATH<x>:DEFine command.

Description
  • This command allows you to define new waveforms using mathematical expressions. The query form of this command returns the math definition for the specified math waveform. The math waveform is specified by x. You can specify a math expression from waveforms, measurements and scalar sources, functions, operands, and numerical constants. Math expressions can be simple, such as Ch1, which specifies that a waveform should show the signal source of Channel 1 with no mathematical computation. Math expressions can also be complex, consisting of 100 plus characters and comprising many sources (including other math waveforms), functions, and operands. As an example, you can enter the expression Log(Ch1+Ch2), which specifies that the signals from channels 1 and 2 are to be algebraically added, and the base 10 log of the sum is to be shown as the final math waveform.
Usage
  • Using the .query() method will send the MATH:MATH<x>:DEFine? query.
  • Using the .verify(value) method will send the MATH:MATH<x>:DEFine? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the MATH:MATH<x>:DEFine value command.
SCPI Syntax 
- MATH:MATH<x>:DEFine <QString>
- MATH:MATH<x>:DEFine?
Info
  • <QString> quoted string argument is the mathematical expression that defines the waveform. MATH:MATH<x>:DEFINE? is for use when the MATH:MATH<x>:TYPE is ADVANCED.

MathMathItemEspi

Bases: SCPICmdRead

The MATH:MATH<x>:ESPI command tree.

Usage
  • Using the .query() method will send the MATH:MATH<x>:ESPI? query.
  • Using the .verify(value) method will send the MATH:MATH<x>:ESPI? query and raise an AssertionError if the returned value does not match value.
Properties
  • .supportedfields: The MATH:MATH<x>:ESPI:SUPPortedfields command.

supportedfields property 

supportedfields: MathMathItemEspiSupportedfields

Return the MATH:MATH<x>:ESPI:SUPPortedfields command.

Description
  • This command sets or queries the field type for the math for the bus source for ESPI bus. The math waveform is specified by x.
Usage
  • Using the .query() method will send the MATH:MATH<x>:ESPI:SUPPortedfields? query.
  • Using the .verify(value) method will send the MATH:MATH<x>:ESPI:SUPPortedfields? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the MATH:MATH<x>:ESPI:SUPPortedfields value command.
SCPI Syntax 
- MATH:MATH<x>:ESPI:SUPPortedfields {DATa|CDATa|RDATa}
- MATH:MATH<x>:ESPI:SUPPortedfields?
Info
  • DATa sets the field type to DATa.
  • CDATa sets the field type to CDATa.
  • RDATa sets the field type to RDATa.

MathMathItemEspiSupportedfields

Bases: SCPICmdWrite, SCPICmdRead

The MATH:MATH<x>:ESPI:SUPPortedfields command.

Description
  • This command sets or queries the field type for the math for the bus source for ESPI bus. The math waveform is specified by x.
Usage
  • Using the .query() method will send the MATH:MATH<x>:ESPI:SUPPortedfields? query.
  • Using the .verify(value) method will send the MATH:MATH<x>:ESPI:SUPPortedfields? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the MATH:MATH<x>:ESPI:SUPPortedfields value command.
SCPI Syntax 
- MATH:MATH<x>:ESPI:SUPPortedfields {DATa|CDATa|RDATa}
- MATH:MATH<x>:ESPI:SUPPortedfields?
Info
  • DATa sets the field type to DATa.
  • CDATa sets the field type to CDATa.
  • RDATa sets the field type to RDATa.

MathMathItemEthercat

Bases: SCPICmdRead

The MATH:MATH<x>:ETHERCAT command tree.

Usage
  • Using the .query() method will send the MATH:MATH<x>:ETHERCAT? query.
  • Using the .verify(value) method will send the MATH:MATH<x>:ETHERCAT? query and raise an AssertionError if the returned value does not match value.
Properties
  • .supportedfields: The MATH:MATH<x>:ETHERCAT:SUPPortedfields command.

supportedfields property 

supportedfields: MathMathItemEthercatSupportedfields

Return the MATH:MATH<x>:ETHERCAT:SUPPortedfields command.

Description
  • This command sets or queries the field type for the math for the bus source for ETHERCAT bus. The math waveform is specified by x.
Usage
  • Using the .query() method will send the MATH:MATH<x>:ETHERCAT:SUPPortedfields? query.
  • Using the .verify(value) method will send the MATH:MATH<x>:ETHERCAT:SUPPortedfields? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the MATH:MATH<x>:ETHERCAT:SUPPortedfields value command.
SCPI Syntax 
- MATH:MATH<x>:ETHERCAT:SUPPortedfields {DATa|SDATa|NWVariabledata}
- MATH:MATH<x>:ETHERCAT:SUPPortedfields?
Info
  • DATa sets the field type to DATa.
  • SDATa sets the field type to SDATa.
  • NWVariabledata sets the field type to NWVariabledata.

MathMathItemEthercatSupportedfields

Bases: SCPICmdWrite, SCPICmdRead

The MATH:MATH<x>:ETHERCAT:SUPPortedfields command.

Description
  • This command sets or queries the field type for the math for the bus source for ETHERCAT bus. The math waveform is specified by x.
Usage
  • Using the .query() method will send the MATH:MATH<x>:ETHERCAT:SUPPortedfields? query.
  • Using the .verify(value) method will send the MATH:MATH<x>:ETHERCAT:SUPPortedfields? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the MATH:MATH<x>:ETHERCAT:SUPPortedfields value command.
SCPI Syntax 
- MATH:MATH<x>:ETHERCAT:SUPPortedfields {DATa|SDATa|NWVariabledata}
- MATH:MATH<x>:ETHERCAT:SUPPortedfields?
Info
  • DATa sets the field type to DATa.
  • SDATa sets the field type to SDATa.
  • NWVariabledata sets the field type to NWVariabledata.

MathMathItemEthernet

Bases: SCPICmdRead

The MATH:MATH<x>:ETHERnet command tree.

Usage
  • Using the .query() method will send the MATH:MATH<x>:ETHERnet? query.
  • Using the .verify(value) method will send the MATH:MATH<x>:ETHERnet? query and raise an AssertionError if the returned value does not match value.
Properties
  • .supportedfields: The MATH:MATH<x>:ETHERnet:SUPPortedfields command.

supportedfields property 

supportedfields: MathMathItemEthernetSupportedfields

Return the MATH:MATH<x>:ETHERnet:SUPPortedfields command.

Description
  • This command sets or queries the field type for the math for the bus source for ETHERnet bus. The math waveform is specified by x.
Usage
  • Using the .query() method will send the MATH:MATH<x>:ETHERnet:SUPPortedfields? query.
  • Using the .verify(value) method will send the MATH:MATH<x>:ETHERnet:SUPPortedfields? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the MATH:MATH<x>:ETHERnet:SUPPortedfields value command.
SCPI Syntax 
- MATH:MATH<x>:ETHERnet:SUPPortedfields {DATa|IPData|TDATa}
- MATH:MATH<x>:ETHERnet:SUPPortedfields?
Info
  • DATa sets the field type to DATa.
  • IPData sets the field type to IPData.
  • TDATa sets the field type to TDATa.

MathMathItemEthernetSupportedfields

Bases: SCPICmdWrite, SCPICmdRead

The MATH:MATH<x>:ETHERnet:SUPPortedfields command.

Description
  • This command sets or queries the field type for the math for the bus source for ETHERnet bus. The math waveform is specified by x.
Usage
  • Using the .query() method will send the MATH:MATH<x>:ETHERnet:SUPPortedfields? query.
  • Using the .verify(value) method will send the MATH:MATH<x>:ETHERnet:SUPPortedfields? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the MATH:MATH<x>:ETHERnet:SUPPortedfields value command.
SCPI Syntax 
- MATH:MATH<x>:ETHERnet:SUPPortedfields {DATa|IPData|TDATa}
- MATH:MATH<x>:ETHERnet:SUPPortedfields?
Info
  • DATa sets the field type to DATa.
  • IPData sets the field type to IPData.
  • TDATa sets the field type to TDATa.

MathMathItemEusb

Bases: SCPICmdRead

The MATH:MATH<x>:EUSB command tree.

Usage
  • Using the .query() method will send the MATH:MATH<x>:EUSB? query.
  • Using the .verify(value) method will send the MATH:MATH<x>:EUSB? query and raise an AssertionError if the returned value does not match value.
Properties
  • .supportedfields: The MATH:MATH<x>:EUSB:SUPPortedfields command.

supportedfields property 

supportedfields: MathMathItemEusbSupportedfields

Return the MATH:MATH<x>:EUSB:SUPPortedfields command.

Description
  • This command sets or queries the field type for the math for the bus source for EUSB bus. The math waveform is specified by x.
Usage
  • Using the .query() method will send the MATH:MATH<x>:EUSB:SUPPortedfields? query.
  • Using the .verify(value) method will send the MATH:MATH<x>:EUSB:SUPPortedfields? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the MATH:MATH<x>:EUSB:SUPPortedfields value command.
SCPI Syntax 
- MATH:MATH<x>:EUSB:SUPPortedfields {DATa|DDATa}
- MATH:MATH<x>:EUSB:SUPPortedfields?
Info
  • DATa sets the field type to DATa. DATa field can be set when eUSB Bus configuration for Speed is set to High and Signal type is Diff.
  • DDATa sets the field type to DDATa.

MathMathItemEusbSupportedfields

Bases: SCPICmdWrite, SCPICmdRead

The MATH:MATH<x>:EUSB:SUPPortedfields command.

Description
  • This command sets or queries the field type for the math for the bus source for EUSB bus. The math waveform is specified by x.
Usage
  • Using the .query() method will send the MATH:MATH<x>:EUSB:SUPPortedfields? query.
  • Using the .verify(value) method will send the MATH:MATH<x>:EUSB:SUPPortedfields? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the MATH:MATH<x>:EUSB:SUPPortedfields value command.
SCPI Syntax 
- MATH:MATH<x>:EUSB:SUPPortedfields {DATa|DDATa}
- MATH:MATH<x>:EUSB:SUPPortedfields?
Info
  • DATa sets the field type to DATa. DATa field can be set when eUSB Bus configuration for Speed is set to High and Signal type is Diff.
  • DDATa sets the field type to DDATa.

MathMathItemFilter

Bases: SCPICmdRead

The MATH:MATH<x>:FILTer command tree.

Usage
  • Using the .query() method will send the MATH:MATH<x>:FILTer? query.
  • Using the .verify(value) method will send the MATH:MATH<x>:FILTer? query and raise an AssertionError if the returned value does not match value.
Properties
  • .cfreq: The MATH:MATH<x>:FILTer:CFReq command.
  • .delay: The MATH:MATH<x>:FILTer:DELay command.
  • .design: The MATH:MATH<x>:FILTer:DESIgn command.
  • .hcfreq: The MATH:MATH<x>:FILTer:HCFReq command.
  • .info: The MATH:MATH<x>:FILTer:INFo command.
  • .lcfreq: The MATH:MATH<x>:FILTer:LCFReq command.
  • .load: The MATH:MATH<x>:FILTer:LOAD command.
  • .order: The MATH:MATH<x>:FILTer:ORDer command.
  • .pripple: The MATH:MATH<x>:FILTer:PRIPple command.
  • .response: The MATH:MATH<x>:FILTer:RESPonse command.
  • .rofactor: The MATH:MATH<x>:FILTer:ROFactor command.
  • .sattenuation: The MATH:MATH<x>:FILTer:SATTenuation command.
  • .save: The MATH:MATH<x>:FILTer:SAVe command.
  • .sdeviation: The MATH:MATH<x>:FILTer:SDEViation command.
  • .sduration: The MATH:MATH<x>:FILTer:SDURation command.
  • .source: The MATH:MATH<x>:FILTer:SOURce command.
  • .symbols: The MATH:MATH<x>:FILTer:SYMBols command.
  • .twidth: The MATH:MATH<x>:FILTer:TWIDth command.
  • .type: The MATH:MATH<x>:FILTer:TYPe command.

cfreq property 

cfreq: MathMathItemFilterCfreq

Return the MATH:MATH<x>:FILTer:CFReq command.

Description
  • This command sets or queries the filter cutoff frequency. The math waveform is specified by x.
Usage
  • Using the .query() method will send the MATH:MATH<x>:FILTer:CFReq? query.
  • Using the .verify(value) method will send the MATH:MATH<x>:FILTer:CFReq? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the MATH:MATH<x>:FILTer:CFReq value command.
SCPI Syntax 
- MATH:MATH<x>:FILTer:CFReq <NR3>
- MATH:MATH<x>:FILTer:CFReq?
Info
  • <NR3> sets the filter cutoff frequency.

delay property 

delay: MathMathItemFilterDelay

Return the MATH:MATH<x>:FILTer:DELay command.

Description
  • This command sets or queries the delay for all pass filter. The math waveform is specified by x.
Usage
  • Using the .query() method will send the MATH:MATH<x>:FILTer:DELay? query.
  • Using the .verify(value) method will send the MATH:MATH<x>:FILTer:DELay? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the MATH:MATH<x>:FILTer:DELay value command.
SCPI Syntax 
- MATH:MATH<x>:FILTer:DELay <NR3>
- MATH:MATH<x>:FILTer:DELay?
Info
  • <NR3> sets the delay for all pass filter.

design property 

design: MathMathItemFilterDesign

Return the MATH:MATH<x>:FILTer:DESIgn command.

Description
  • This command performs filter specific Apply, Abort, and Generate operations. The math waveform is specified by x.
Usage
  • Using the .write(value) method will send the MATH:MATH<x>:FILTer:DESIgn value command.
SCPI Syntax 
- MATH:MATH<x>:FILTer:DESIgn {EXECUTE|ABORT|APPLY}
Info
  • EXECUTE executes filter file creation.
  • APPLY applies the filter definition on the Math waveform.
  • ABORT aborts the filter execution.

hcfreq property 

hcfreq: MathMathItemFilterHcfreq

Return the MATH:MATH<x>:FILTer:HCFReq command.

Description
  • This command sets or queries the high cutoff frequency for bandpass or band stop filter. The math waveform is specified by x.
Usage
  • Using the .query() method will send the MATH:MATH<x>:FILTer:HCFReq? query.
  • Using the .verify(value) method will send the MATH:MATH<x>:FILTer:HCFReq? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the MATH:MATH<x>:FILTer:HCFReq value command.
SCPI Syntax 
- MATH:MATH<x>:FILTer:HCFReq <NR3>
- MATH:MATH<x>:FILTer:HCFReq?
Info
  • <NR3> sets the high cutoff frequency for bandpass or band stop filter.

info property 

info: MathMathItemFilterInfo

Return the MATH:MATH<x>:FILTer:INFo command.

Description
  • This command returns filter information output when the user creates a filter. The math waveform is specified by x.
Usage
  • Using the .query() method will send the MATH:MATH<x>:FILTer:INFo? query.
  • Using the .verify(value) method will send the MATH:MATH<x>:FILTer:INFo? query and raise an AssertionError if the returned value does not match value.
SCPI Syntax 
- MATH:MATH<x>:FILTer:INFo?

lcfreq property 

lcfreq: MathMathItemFilterLcfreq

Return the MATH:MATH<x>:FILTer:LCFReq command.

Description
  • This command sets or queries the low cutoff frequency for bandpass or band stop filter. The math waveform is specified by x.
Usage
  • Using the .query() method will send the MATH:MATH<x>:FILTer:LCFReq? query.
  • Using the .verify(value) method will send the MATH:MATH<x>:FILTer:LCFReq? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the MATH:MATH<x>:FILTer:LCFReq value command.
SCPI Syntax 
- MATH:MATH<x>:FILTer:LCFReq <NR3>
- MATH:MATH<x>:FILTer:LCFReq?
Info
  • <NR3> sets the low cutoff frequency for bandpass or band stop filter.

load property 

load: MathMathItemFilterLoad

Return the MATH:MATH<x>:FILTer:LOAD command.

Description
  • This command loads the filter file. The math waveform is specified by x.
Usage
  • Using the .write(value) method will send the MATH:MATH<x>:FILTer:LOAD value command.
SCPI Syntax 
- MATH:MATH<x>:FILTer:LOAD <QString>
Info
  • <QString> sets the path to the filter file to load. Linux default location is C:. Windows default location is C:UsersPublicTektronixTekScopeFilters.
Sub-properties
  • .response: The MATH:MATH<x>:FILTer:LOAD:RESPonse command.

order property 

order: MathMathItemFilterOrder

Return the MATH:MATH<x>:FILTer:ORDer command.

Description
  • This command sets or queries the filter order. The math waveform is specified by x.
Usage
  • Using the .query() method will send the MATH:MATH<x>:FILTer:ORDer? query.
  • Using the .verify(value) method will send the MATH:MATH<x>:FILTer:ORDer? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the MATH:MATH<x>:FILTer:ORDer value command.
SCPI Syntax 
- MATH:MATH<x>:FILTer:ORDer <NR1>
- MATH:MATH<x>:FILTer:ORDer?
Info
  • <NR1> sets the filter order.

pripple property 

pripple: MathMathItemFilterPripple

Return the MATH:MATH<x>:FILTer:PRIPple command.

Description
  • This command sets or queries the pass band ripple in the filter response. The math waveform is specified by x.
Usage
  • Using the .query() method will send the MATH:MATH<x>:FILTer:PRIPple? query.
  • Using the .verify(value) method will send the MATH:MATH<x>:FILTer:PRIPple? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the MATH:MATH<x>:FILTer:PRIPple value command.
SCPI Syntax 
- MATH:MATH<x>:FILTer:PRIPple <NR3>
- MATH:MATH<x>:FILTer:PRIPple?
Info
  • <NR3> sets the pass band ripple in the filter response.

response property 

response: MathMathItemFilterResponse

Return the MATH:MATH<x>:FILTer:RESPonse command.

Description
  • This command will load the filter responses and automatically apply filter option. The math waveform is specified by x.
Usage
  • Using the .write(value) method will send the MATH:MATH<x>:FILTer:RESPonse value command.
SCPI Syntax 
- MATH:MATH<x>:FILTer:RESPonse {BUTTerworth|CHEBYONe|CHEBYTWo|ELLiptical|GAUSsian|BESSelCUSTom}
Info
  • BUTTerworth specifies the filter response as BUTTerworth.
  • CHEBYONe specifies the filter response as CHEBYONe.
  • CHEBYTWo specifies the filter response as CHEBYTWo.
  • ELLiptical specifies the filter response as ELLiptical.
  • GAUSsian specifies the filter response as GAUSsian.
  • BESSelCUSTom specifies the filter response as BESSelCUSTom.

rofactor property 

rofactor: MathMathItemFilterRofactor

Return the MATH:MATH<x>:FILTer:ROFactor command.

Description
  • This command sets or queries roll off factor for raised cosine or root raised cosine filter. The math waveform is specified by x.
Usage
  • Using the .query() method will send the MATH:MATH<x>:FILTer:ROFactor? query.
  • Using the .verify(value) method will send the MATH:MATH<x>:FILTer:ROFactor? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the MATH:MATH<x>:FILTer:ROFactor value command.
SCPI Syntax 
- MATH:MATH<x>:FILTer:ROFactor <NR3>
- MATH:MATH<x>:FILTer:ROFactor?
Info
  • <NR1> specifies the Roll-off Factor value for Rasied-Cosine(RC) filter type.

sattenuation property 

sattenuation: MathMathItemFilterSattenuation

Return the MATH:MATH<x>:FILTer:SATTenuation command.

Description
  • This command sets or queries the stop band attenuation in the filter response. The math waveform is specified by x.
Usage
  • Using the .query() method will send the MATH:MATH<x>:FILTer:SATTenuation? query.
  • Using the .verify(value) method will send the MATH:MATH<x>:FILTer:SATTenuation? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the MATH:MATH<x>:FILTer:SATTenuation value command.
SCPI Syntax 
- MATH:MATH<x>:FILTer:SATTenuation <NR3>
- MATH:MATH<x>:FILTer:SATTenuation?
Info
  • <NR3> sets the stop band attenuation in the filter response.

save property 

save: MathMathItemFilterSave

Return the MATH:MATH<x>:FILTer:SAVe command.

Description
  • This command saves the filter file. The math waveform is specified by x.
Usage
  • Using the .write(value) method will send the MATH:MATH<x>:FILTer:SAVe value command.
SCPI Syntax 
- MATH:MATH<x>:FILTer:SAVe <QString>
Info
  • <QString> saves the created filter in .flt format to the specified save location.
Sub-properties
  • .response: The MATH:MATH<x>:FILTer:SAVe:RESPonse command.

sdeviation property 

sdeviation: MathMathItemFilterSdeviation

Return the MATH:MATH<x>:FILTer:SDEViation command.

Description
  • This command sets or queries the standard deviation in Gaussian filter. The math waveform is specified by x.
Usage
  • Using the .query() method will send the MATH:MATH<x>:FILTer:SDEViation? query.
  • Using the .verify(value) method will send the MATH:MATH<x>:FILTer:SDEViation? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the MATH:MATH<x>:FILTer:SDEViation value command.
SCPI Syntax 
- MATH:MATH<x>:FILTer:SDEViation <NR3>
- MATH:MATH<x>:FILTer:SDEViation?
Info
  • <NR3> sets the standard deviation in gaussian filter.

sduration property 

sduration: MathMathItemFilterSduration

Return the MATH:MATH<x>:FILTer:SDURation command.

Description
  • This command sets or queries the symbol duration for raised cosine or root raised cosine filter. The math waveform is specified by x.
Usage
  • Using the .query() method will send the MATH:MATH<x>:FILTer:SDURation? query.
  • Using the .verify(value) method will send the MATH:MATH<x>:FILTer:SDURation? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the MATH:MATH<x>:FILTer:SDURation value command.
SCPI Syntax 
- MATH:MATH<x>:FILTer:SDURation <NR3>
- MATH:MATH<x>:FILTer:SDURation?
Info
  • <NR3> specifies the number of symbol duration for Root-Raised-Cosine (RRC) filter type.

source property 

source: MathMathItemFilterSource

Return the MATH:MATH<x>:FILTer:SOURce command.

Description
  • This command sets or queries the math waveform filter source. The math waveform and source are specified by x.
Usage
  • Using the .query() method will send the MATH:MATH<x>:FILTer:SOURce? query.
  • Using the .verify(value) method will send the MATH:MATH<x>:FILTer:SOURce? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the MATH:MATH<x>:FILTer:SOURce value command.
SCPI Syntax 
- MATH:MATH<x>:FILTer:SOURce {S<x>_Ch<x>|CH<x>|MATH<x>|REF<x>}
- MATH:MATH<x>:FILTer:SOURce?
Info
  • S<x>_Ch<x> specifies the remote scope number and the analog channel as the source.
  • CH<x> specifies an analog channel as the source.
  • Math<x> specifies a math waveform as the source.
  • REF<x> specifies a reference waveform as the source.

symbols property 

symbols: MathMathItemFilterSymbols

Return the MATH:MATH<x>:FILTer:SYMBols command.

Description
  • This command sets or queries the symbol for raised cosine or root raised cosine filter. The math waveform is specified by x.
Usage
  • Using the .query() method will send the MATH:MATH<x>:FILTer:SYMBols? query.
  • Using the .verify(value) method will send the MATH:MATH<x>:FILTer:SYMBols? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the MATH:MATH<x>:FILTer:SYMBols value command.
SCPI Syntax 
- MATH:MATH<x>:FILTer:SYMBols <NR1>
- MATH:MATH<x>:FILTer:SYMBols?
Info
  • <NR1> specifies the number of symbols for Raised-Cosine (RC) filter type.

twidth property 

twidth: MathMathItemFilterTwidth

Return the MATH:MATH<x>:FILTer:TWIDth command.

Description
  • This command sets or queries the filter Transition Width for Custom filter response. The math waveform is specified by x.
Usage
  • Using the .query() method will send the MATH:MATH<x>:FILTer:TWIDth? query.
  • Using the .verify(value) method will send the MATH:MATH<x>:FILTer:TWIDth? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the MATH:MATH<x>:FILTer:TWIDth value command.
SCPI Syntax 
- MATH:MATH<x>:FILTer:TWIDth <NR3>
- MATH:MATH<x>:FILTer:TWIDth?
Info
  • <NR3> specifies the Transition Width for Custom filter response.

type property 

type: MathMathItemFilterType

Return the MATH:MATH<x>:FILTer:TYPe command.

Description
  • This command specifies or queries the filter type. The math waveform is specified by x.
Usage
  • Using the .query() method will send the MATH:MATH<x>:FILTer:TYPe? query.
  • Using the .verify(value) method will send the MATH:MATH<x>:FILTer:TYPe? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the MATH:MATH<x>:FILTer:TYPe value command.
SCPI Syntax 
- MATH:MATH<x>:FILTer:TYPe {LPASs|HPASs|BPASs|BSTop|APASs|HILBert|DIFFerentiator|RC|RRC}
- MATH:MATH<x>:FILTer:TYPe?
Info
  • LPASs specifies the filter type as LPASs.
  • HPASs specifies the filter type as HPASs.
  • BPASs specifies the filter type as BPASs.
  • BSTop specifies the filter type as BSTop.
  • APASs specifies the filter type as APASs.
  • HILBert specifies the filter type as HILBert.
  • DIFFerentiator specifies the filter type as DIFFerentiator.
  • RC specifies the filter type as RC.
  • RCC specifies the filter type as RCC.

MathMathItemFilterCfreq

Bases: SCPICmdWrite, SCPICmdRead

The MATH:MATH<x>:FILTer:CFReq command.

Description
  • This command sets or queries the filter cutoff frequency. The math waveform is specified by x.
Usage
  • Using the .query() method will send the MATH:MATH<x>:FILTer:CFReq? query.
  • Using the .verify(value) method will send the MATH:MATH<x>:FILTer:CFReq? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the MATH:MATH<x>:FILTer:CFReq value command.
SCPI Syntax 
- MATH:MATH<x>:FILTer:CFReq <NR3>
- MATH:MATH<x>:FILTer:CFReq?
Info
  • <NR3> sets the filter cutoff frequency.

MathMathItemFilterDelay

Bases: SCPICmdWrite, SCPICmdRead

The MATH:MATH<x>:FILTer:DELay command.

Description
  • This command sets or queries the delay for all pass filter. The math waveform is specified by x.
Usage
  • Using the .query() method will send the MATH:MATH<x>:FILTer:DELay? query.
  • Using the .verify(value) method will send the MATH:MATH<x>:FILTer:DELay? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the MATH:MATH<x>:FILTer:DELay value command.
SCPI Syntax 
- MATH:MATH<x>:FILTer:DELay <NR3>
- MATH:MATH<x>:FILTer:DELay?
Info
  • <NR3> sets the delay for all pass filter.

MathMathItemFilterDesign

Bases: SCPICmdWrite

The MATH:MATH<x>:FILTer:DESIgn command.

Description
  • This command performs filter specific Apply, Abort, and Generate operations. The math waveform is specified by x.
Usage
  • Using the .write(value) method will send the MATH:MATH<x>:FILTer:DESIgn value command.
SCPI Syntax 
- MATH:MATH<x>:FILTer:DESIgn {EXECUTE|ABORT|APPLY}
Info
  • EXECUTE executes filter file creation.
  • APPLY applies the filter definition on the Math waveform.
  • ABORT aborts the filter execution.

MathMathItemFilterHcfreq

Bases: SCPICmdWrite, SCPICmdRead

The MATH:MATH<x>:FILTer:HCFReq command.

Description
  • This command sets or queries the high cutoff frequency for bandpass or band stop filter. The math waveform is specified by x.
Usage
  • Using the .query() method will send the MATH:MATH<x>:FILTer:HCFReq? query.
  • Using the .verify(value) method will send the MATH:MATH<x>:FILTer:HCFReq? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the MATH:MATH<x>:FILTer:HCFReq value command.
SCPI Syntax 
- MATH:MATH<x>:FILTer:HCFReq <NR3>
- MATH:MATH<x>:FILTer:HCFReq?
Info
  • <NR3> sets the high cutoff frequency for bandpass or band stop filter.

MathMathItemFilterInfo

Bases: SCPICmdRead

The MATH:MATH<x>:FILTer:INFo command.

Description
  • This command returns filter information output when the user creates a filter. The math waveform is specified by x.
Usage
  • Using the .query() method will send the MATH:MATH<x>:FILTer:INFo? query.
  • Using the .verify(value) method will send the MATH:MATH<x>:FILTer:INFo? query and raise an AssertionError if the returned value does not match value.
SCPI Syntax 
- MATH:MATH<x>:FILTer:INFo?

MathMathItemFilterLcfreq

Bases: SCPICmdWrite, SCPICmdRead

The MATH:MATH<x>:FILTer:LCFReq command.

Description
  • This command sets or queries the low cutoff frequency for bandpass or band stop filter. The math waveform is specified by x.
Usage
  • Using the .query() method will send the MATH:MATH<x>:FILTer:LCFReq? query.
  • Using the .verify(value) method will send the MATH:MATH<x>:FILTer:LCFReq? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the MATH:MATH<x>:FILTer:LCFReq value command.
SCPI Syntax 
- MATH:MATH<x>:FILTer:LCFReq <NR3>
- MATH:MATH<x>:FILTer:LCFReq?
Info
  • <NR3> sets the low cutoff frequency for bandpass or band stop filter.

MathMathItemFilterLoad

Bases: SCPICmdWrite, SCPICmdRead

The MATH:MATH<x>:FILTer:LOAD command.

Description
  • This command loads the filter file. The math waveform is specified by x.
Usage
  • Using the .write(value) method will send the MATH:MATH<x>:FILTer:LOAD value command.
SCPI Syntax 
- MATH:MATH<x>:FILTer:LOAD <QString>
Info
  • <QString> sets the path to the filter file to load. Linux default location is C:. Windows default location is C:UsersPublicTektronixTekScopeFilters.
Properties
  • .response: The MATH:MATH<x>:FILTer:LOAD:RESPonse command.

response property 

response: MathMathItemFilterLoadResponse

Return the MATH:MATH<x>:FILTer:LOAD:RESPonse command.

Description
  • This command will load the filter responses and automatically apply filter option. The math waveform is specified by x.
Usage
  • Using the .query() method will send the MATH:MATH<x>:FILTer:LOAD:RESPonse? query.
  • Using the .verify(value) method will send the MATH:MATH<x>:FILTer:LOAD:RESPonse? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the MATH:MATH<x>:FILTer:LOAD:RESPonse value command.
SCPI Syntax 
- MATH:MATH<x>:FILTer:LOAD:RESPonse {1|0}
- MATH:MATH<x>:FILTer:LOAD:RESPonse?
Info
  • 1 enables recall of filter response image.
  • 0 disables recall of filter response image.

MathMathItemFilterLoadResponse

Bases: SCPICmdWrite, SCPICmdRead

The MATH:MATH<x>:FILTer:LOAD:RESPonse command.

Description
  • This command will load the filter responses and automatically apply filter option. The math waveform is specified by x.
Usage
  • Using the .query() method will send the MATH:MATH<x>:FILTer:LOAD:RESPonse? query.
  • Using the .verify(value) method will send the MATH:MATH<x>:FILTer:LOAD:RESPonse? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the MATH:MATH<x>:FILTer:LOAD:RESPonse value command.
SCPI Syntax 
- MATH:MATH<x>:FILTer:LOAD:RESPonse {1|0}
- MATH:MATH<x>:FILTer:LOAD:RESPonse?
Info
  • 1 enables recall of filter response image.
  • 0 disables recall of filter response image.

MathMathItemFilterOrder

Bases: SCPICmdWrite, SCPICmdRead

The MATH:MATH<x>:FILTer:ORDer command.

Description
  • This command sets or queries the filter order. The math waveform is specified by x.
Usage
  • Using the .query() method will send the MATH:MATH<x>:FILTer:ORDer? query.
  • Using the .verify(value) method will send the MATH:MATH<x>:FILTer:ORDer? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the MATH:MATH<x>:FILTer:ORDer value command.
SCPI Syntax 
- MATH:MATH<x>:FILTer:ORDer <NR1>
- MATH:MATH<x>:FILTer:ORDer?
Info
  • <NR1> sets the filter order.

MathMathItemFilterPripple

Bases: SCPICmdWrite, SCPICmdRead

The MATH:MATH<x>:FILTer:PRIPple command.

Description
  • This command sets or queries the pass band ripple in the filter response. The math waveform is specified by x.
Usage
  • Using the .query() method will send the MATH:MATH<x>:FILTer:PRIPple? query.
  • Using the .verify(value) method will send the MATH:MATH<x>:FILTer:PRIPple? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the MATH:MATH<x>:FILTer:PRIPple value command.
SCPI Syntax 
- MATH:MATH<x>:FILTer:PRIPple <NR3>
- MATH:MATH<x>:FILTer:PRIPple?
Info
  • <NR3> sets the pass band ripple in the filter response.

MathMathItemFilterResponse

Bases: SCPICmdWrite

The MATH:MATH<x>:FILTer:RESPonse command.

Description
  • This command will load the filter responses and automatically apply filter option. The math waveform is specified by x.
Usage
  • Using the .write(value) method will send the MATH:MATH<x>:FILTer:RESPonse value command.
SCPI Syntax 
- MATH:MATH<x>:FILTer:RESPonse {BUTTerworth|CHEBYONe|CHEBYTWo|ELLiptical|GAUSsian|BESSelCUSTom}
Info
  • BUTTerworth specifies the filter response as BUTTerworth.
  • CHEBYONe specifies the filter response as CHEBYONe.
  • CHEBYTWo specifies the filter response as CHEBYTWo.
  • ELLiptical specifies the filter response as ELLiptical.
  • GAUSsian specifies the filter response as GAUSsian.
  • BESSelCUSTom specifies the filter response as BESSelCUSTom.

MathMathItemFilterRofactor

Bases: SCPICmdWrite, SCPICmdRead

The MATH:MATH<x>:FILTer:ROFactor command.

Description
  • This command sets or queries roll off factor for raised cosine or root raised cosine filter. The math waveform is specified by x.
Usage
  • Using the .query() method will send the MATH:MATH<x>:FILTer:ROFactor? query.
  • Using the .verify(value) method will send the MATH:MATH<x>:FILTer:ROFactor? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the MATH:MATH<x>:FILTer:ROFactor value command.
SCPI Syntax 
- MATH:MATH<x>:FILTer:ROFactor <NR3>
- MATH:MATH<x>:FILTer:ROFactor?
Info
  • <NR1> specifies the Roll-off Factor value for Rasied-Cosine(RC) filter type.

MathMathItemFilterSattenuation

Bases: SCPICmdWrite, SCPICmdRead

The MATH:MATH<x>:FILTer:SATTenuation command.

Description
  • This command sets or queries the stop band attenuation in the filter response. The math waveform is specified by x.
Usage
  • Using the .query() method will send the MATH:MATH<x>:FILTer:SATTenuation? query.
  • Using the .verify(value) method will send the MATH:MATH<x>:FILTer:SATTenuation? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the MATH:MATH<x>:FILTer:SATTenuation value command.
SCPI Syntax 
- MATH:MATH<x>:FILTer:SATTenuation <NR3>
- MATH:MATH<x>:FILTer:SATTenuation?
Info
  • <NR3> sets the stop band attenuation in the filter response.

MathMathItemFilterSave

Bases: SCPICmdWrite, SCPICmdRead

The MATH:MATH<x>:FILTer:SAVe command.

Description
  • This command saves the filter file. The math waveform is specified by x.
Usage
  • Using the .write(value) method will send the MATH:MATH<x>:FILTer:SAVe value command.
SCPI Syntax 
- MATH:MATH<x>:FILTer:SAVe <QString>
Info
  • <QString> saves the created filter in .flt format to the specified save location.
Properties
  • .response: The MATH:MATH<x>:FILTer:SAVe:RESPonse command.

response property 

response: MathMathItemFilterSaveResponse

Return the MATH:MATH<x>:FILTer:SAVe:RESPonse command.

Description
  • This command set the filter response images to be saved while saving the filter file. The math waveform is specified by x.
Usage
  • Using the .query() method will send the MATH:MATH<x>:FILTer:SAVe:RESPonse? query.
  • Using the .verify(value) method will send the MATH:MATH<x>:FILTer:SAVe:RESPonse? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the MATH:MATH<x>:FILTer:SAVe:RESPonse value command.
SCPI Syntax 
- MATH:MATH<x>:FILTer:SAVe:RESPonse {1|0}
- MATH:MATH<x>:FILTer:SAVe:RESPonse?
Info
  • 1 enables the save of the filter response image.
  • 0 disables the save of the filter response image. This is the default value.

MathMathItemFilterSaveResponse

Bases: SCPICmdWrite, SCPICmdRead

The MATH:MATH<x>:FILTer:SAVe:RESPonse command.

Description
  • This command set the filter response images to be saved while saving the filter file. The math waveform is specified by x.
Usage
  • Using the .query() method will send the MATH:MATH<x>:FILTer:SAVe:RESPonse? query.
  • Using the .verify(value) method will send the MATH:MATH<x>:FILTer:SAVe:RESPonse? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the MATH:MATH<x>:FILTer:SAVe:RESPonse value command.
SCPI Syntax 
- MATH:MATH<x>:FILTer:SAVe:RESPonse {1|0}
- MATH:MATH<x>:FILTer:SAVe:RESPonse?
Info
  • 1 enables the save of the filter response image.
  • 0 disables the save of the filter response image. This is the default value.

MathMathItemFilterSdeviation

Bases: SCPICmdWrite, SCPICmdRead

The MATH:MATH<x>:FILTer:SDEViation command.

Description
  • This command sets or queries the standard deviation in Gaussian filter. The math waveform is specified by x.
Usage
  • Using the .query() method will send the MATH:MATH<x>:FILTer:SDEViation? query.
  • Using the .verify(value) method will send the MATH:MATH<x>:FILTer:SDEViation? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the MATH:MATH<x>:FILTer:SDEViation value command.
SCPI Syntax 
- MATH:MATH<x>:FILTer:SDEViation <NR3>
- MATH:MATH<x>:FILTer:SDEViation?
Info
  • <NR3> sets the standard deviation in gaussian filter.

MathMathItemFilterSduration

Bases: SCPICmdWrite, SCPICmdRead

The MATH:MATH<x>:FILTer:SDURation command.

Description
  • This command sets or queries the symbol duration for raised cosine or root raised cosine filter. The math waveform is specified by x.
Usage
  • Using the .query() method will send the MATH:MATH<x>:FILTer:SDURation? query.
  • Using the .verify(value) method will send the MATH:MATH<x>:FILTer:SDURation? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the MATH:MATH<x>:FILTer:SDURation value command.
SCPI Syntax 
- MATH:MATH<x>:FILTer:SDURation <NR3>
- MATH:MATH<x>:FILTer:SDURation?
Info
  • <NR3> specifies the number of symbol duration for Root-Raised-Cosine (RRC) filter type.

MathMathItemFilterSource

Bases: SCPICmdWrite, SCPICmdRead

The MATH:MATH<x>:FILTer:SOURce command.

Description
  • This command sets or queries the math waveform filter source. The math waveform and source are specified by x.
Usage
  • Using the .query() method will send the MATH:MATH<x>:FILTer:SOURce? query.
  • Using the .verify(value) method will send the MATH:MATH<x>:FILTer:SOURce? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the MATH:MATH<x>:FILTer:SOURce value command.
SCPI Syntax 
- MATH:MATH<x>:FILTer:SOURce {S<x>_Ch<x>|CH<x>|MATH<x>|REF<x>}
- MATH:MATH<x>:FILTer:SOURce?
Info
  • S<x>_Ch<x> specifies the remote scope number and the analog channel as the source.
  • CH<x> specifies an analog channel as the source.
  • Math<x> specifies a math waveform as the source.
  • REF<x> specifies a reference waveform as the source.

MathMathItemFilterSymbols

Bases: SCPICmdWrite, SCPICmdRead

The MATH:MATH<x>:FILTer:SYMBols command.

Description
  • This command sets or queries the symbol for raised cosine or root raised cosine filter. The math waveform is specified by x.
Usage
  • Using the .query() method will send the MATH:MATH<x>:FILTer:SYMBols? query.
  • Using the .verify(value) method will send the MATH:MATH<x>:FILTer:SYMBols? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the MATH:MATH<x>:FILTer:SYMBols value command.
SCPI Syntax 
- MATH:MATH<x>:FILTer:SYMBols <NR1>
- MATH:MATH<x>:FILTer:SYMBols?
Info
  • <NR1> specifies the number of symbols for Raised-Cosine (RC) filter type.

MathMathItemFilterTwidth

Bases: SCPICmdWrite, SCPICmdRead

The MATH:MATH<x>:FILTer:TWIDth command.

Description
  • This command sets or queries the filter Transition Width for Custom filter response. The math waveform is specified by x.
Usage
  • Using the .query() method will send the MATH:MATH<x>:FILTer:TWIDth? query.
  • Using the .verify(value) method will send the MATH:MATH<x>:FILTer:TWIDth? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the MATH:MATH<x>:FILTer:TWIDth value command.
SCPI Syntax 
- MATH:MATH<x>:FILTer:TWIDth <NR3>
- MATH:MATH<x>:FILTer:TWIDth?
Info
  • <NR3> specifies the Transition Width for Custom filter response.

MathMathItemFilterType

Bases: SCPICmdWrite, SCPICmdRead

The MATH:MATH<x>:FILTer:TYPe command.

Description
  • This command specifies or queries the filter type. The math waveform is specified by x.
Usage
  • Using the .query() method will send the MATH:MATH<x>:FILTer:TYPe? query.
  • Using the .verify(value) method will send the MATH:MATH<x>:FILTer:TYPe? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the MATH:MATH<x>:FILTer:TYPe value command.
SCPI Syntax 
- MATH:MATH<x>:FILTer:TYPe {LPASs|HPASs|BPASs|BSTop|APASs|HILBert|DIFFerentiator|RC|RRC}
- MATH:MATH<x>:FILTer:TYPe?
Info
  • LPASs specifies the filter type as LPASs.
  • HPASs specifies the filter type as HPASs.
  • BPASs specifies the filter type as BPASs.
  • BSTop specifies the filter type as BSTop.
  • APASs specifies the filter type as APASs.
  • HILBert specifies the filter type as HILBert.
  • DIFFerentiator specifies the filter type as DIFFerentiator.
  • RC specifies the filter type as RC.
  • RCC specifies the filter type as RCC.

MathMathItemFlexray

Bases: SCPICmdRead

The MATH:MATH<x>:FLEXray command tree.

Usage
  • Using the .query() method will send the MATH:MATH<x>:FLEXray? query.
  • Using the .verify(value) method will send the MATH:MATH<x>:FLEXray? query and raise an AssertionError if the returned value does not match value.
Properties
  • .supportedfields: The MATH:MATH<x>:FLEXray:SUPPortedfields command.

supportedfields property 

supportedfields: MathMathItemFlexraySupportedfields

Return the MATH:MATH<x>:FLEXray:SUPPortedfields command.

Description
  • This command sets or queries the field type for the math for the bus source for FLEXray bus. The math waveform is specified by x.
Usage
  • Using the .query() method will send the MATH:MATH<x>:FLEXray:SUPPortedfields? query.
  • Using the .verify(value) method will send the MATH:MATH<x>:FLEXray:SUPPortedfields? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the MATH:MATH<x>:FLEXray:SUPPortedfields value command.
SCPI Syntax 
- MATH:MATH<x>:FLEXray:SUPPortedfields {DATa}
- MATH:MATH<x>:FLEXray:SUPPortedfields?
Info
  • DATa sets the field type to DATa.

MathMathItemFlexraySupportedfields

Bases: SCPICmdWrite, SCPICmdRead

The MATH:MATH<x>:FLEXray:SUPPortedfields command.

Description
  • This command sets or queries the field type for the math for the bus source for FLEXray bus. The math waveform is specified by x.
Usage
  • Using the .query() method will send the MATH:MATH<x>:FLEXray:SUPPortedfields? query.
  • Using the .verify(value) method will send the MATH:MATH<x>:FLEXray:SUPPortedfields? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the MATH:MATH<x>:FLEXray:SUPPortedfields value command.
SCPI Syntax 
- MATH:MATH<x>:FLEXray:SUPPortedfields {DATa}
- MATH:MATH<x>:FLEXray:SUPPortedfields?
Info
  • DATa sets the field type to DATa.

MathMathItemFunction

Bases: SCPICmdWrite

The MATH:MATH<x>:FUNCtion command.

Description
  • This command sets or queries the basic math arithmetic function. The math waveform is specified by x.
Usage
  • Using the .write(value) method will send the MATH:MATH<x>:FUNCtion value command.
SCPI Syntax 
- MATH:MATH<x>:FUNCtion {ADD|SUBtract|MULTiply|DIVide}
Info
  • ADD sets the basic math function to add.
  • SUBtract sets the basic math function to subtract.
  • MULTiply sets the basic math function to multiply.
  • DIVide sets the basic math function to divide.

MathMathItemGating

Bases: SCPICmdWrite, SCPICmdRead

The MATH:MATH<x>:GATing command.

Description
  • This command specifies or returns the gating setting. It only applies to Math FFT plots. The math waveform is specified by x.
Usage
  • Using the .query() method will send the MATH:MATH<x>:GATing? query.
  • Using the .verify(value) method will send the MATH:MATH<x>:GATing? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the MATH:MATH<x>:GATing value command.
SCPI Syntax 
- MATH:MATH<x>:GATing {NONE|SCREEN|CURSor}
- MATH:MATH<x>:GATing?
Info
  • NONE turns off math gating.
  • SCREEN turns on gating, using the left and right edges of the screen.
  • CURSor limits math to the portion of the waveform between the vertical bar cursors, even if they are off screen.

MathMathItemI2c

Bases: SCPICmdRead

The MATH:MATH<x>:I2C command tree.

Usage
  • Using the .query() method will send the MATH:MATH<x>:I2C? query.
  • Using the .verify(value) method will send the MATH:MATH<x>:I2C? query and raise an AssertionError if the returned value does not match value.
Properties
  • .supportedfields: The MATH:MATH<x>:I2C:SUPPortedfields command.

supportedfields property 

supportedfields: MathMathItemI2cSupportedfields

Return the MATH:MATH<x>:I2C:SUPPortedfields command.

Description
  • This command sets or queries the field type for the math for the bus source for I2C bus. The math waveform is specified by x.
Usage
  • Using the .query() method will send the MATH:MATH<x>:I2C:SUPPortedfields? query.
  • Using the .verify(value) method will send the MATH:MATH<x>:I2C:SUPPortedfields? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the MATH:MATH<x>:I2C:SUPPortedfields value command.
SCPI Syntax 
- MATH:MATH<x>:I2C:SUPPortedfields {DATa}
- MATH:MATH<x>:I2C:SUPPortedfields?
Info
  • DATa sets the field type to DATa.

MathMathItemI2cSupportedfields

Bases: SCPICmdWrite, SCPICmdRead

The MATH:MATH<x>:I2C:SUPPortedfields command.

Description
  • This command sets or queries the field type for the math for the bus source for I2C bus. The math waveform is specified by x.
Usage
  • Using the .query() method will send the MATH:MATH<x>:I2C:SUPPortedfields? query.
  • Using the .verify(value) method will send the MATH:MATH<x>:I2C:SUPPortedfields? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the MATH:MATH<x>:I2C:SUPPortedfields value command.
SCPI Syntax 
- MATH:MATH<x>:I2C:SUPPortedfields {DATa}
- MATH:MATH<x>:I2C:SUPPortedfields?
Info
  • DATa sets the field type to DATa.

MathMathItemI3c

Bases: SCPICmdRead

The MATH:MATH<x>:I3C command tree.

Usage
  • Using the .query() method will send the MATH:MATH<x>:I3C? query.
  • Using the .verify(value) method will send the MATH:MATH<x>:I3C? query and raise an AssertionError if the returned value does not match value.
Properties
  • .supportedfields: The MATH:MATH<x>:I3C:SUPPortedfields command.

supportedfields property 

supportedfields: MathMathItemI3cSupportedfields

Return the MATH:MATH<x>:I3C:SUPPortedfields command.

Description
  • This command sets or queries the field type for the math for the bus source for I3Cbus. The math waveform is specified by x.
Usage
  • Using the .query() method will send the MATH:MATH<x>:I3C:SUPPortedfields? query.
  • Using the .verify(value) method will send the MATH:MATH<x>:I3C:SUPPortedfields? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the MATH:MATH<x>:I3C:SUPPortedfields value command.
SCPI Syntax 
- MATH:MATH<x>:I3C:SUPPortedfields {DATa}
- MATH:MATH<x>:I3C:SUPPortedfields?
Info
  • DATa sets the field type to DATa.

MathMathItemI3cSupportedfields

Bases: SCPICmdWrite, SCPICmdRead

The MATH:MATH<x>:I3C:SUPPortedfields command.

Description
  • This command sets or queries the field type for the math for the bus source for I3Cbus. The math waveform is specified by x.
Usage
  • Using the .query() method will send the MATH:MATH<x>:I3C:SUPPortedfields? query.
  • Using the .verify(value) method will send the MATH:MATH<x>:I3C:SUPPortedfields? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the MATH:MATH<x>:I3C:SUPPortedfields value command.
SCPI Syntax 
- MATH:MATH<x>:I3C:SUPPortedfields {DATa}
- MATH:MATH<x>:I3C:SUPPortedfields?
Info
  • DATa sets the field type to DATa.

MathMathItemInterpolation

Bases: SCPICmdWrite

The MATH:MATH<x>:INTERpolation command.

Description
  • This command sets or queries whether sinc interpolation is enabled for math on bus source. The math waveform is specified by x.
Usage
  • Using the .write(value) method will send the MATH:MATH<x>:INTERpolation value command.
SCPI Syntax 
- MATH:MATH<x>:INTERpolation {ON|OFF}
Info
  • ON indicates that the sinc interpolation is used for math waveform.
  • OFF indicates no interpolation is used for math waveform. Waveform will appear ‘stair-steppy’ in this case.

MathMathItemLabel

Bases: SCPICmdRead

The MATH:MATH<x>:LABel command tree.

Usage
  • Using the .query() method will send the MATH:MATH<x>:LABel? query.
  • Using the .verify(value) method will send the MATH:MATH<x>:LABel? query and raise an AssertionError if the returned value does not match value.
Properties
  • .color: The MATH:MATH<x>:LABel:COLor command.
  • .font: The MATH:MATH<x>:LABel:FONT command tree.
  • .name: The MATH:MATH<x>:LABel:NAMe command.
  • .xpos: The MATH:MATH<x>:LABel:XPOS command.
  • .ypos: The MATH:MATH<x>:LABel:YPOS command.

color property 

color: MathMathItemLabelColor

Return the MATH:MATH<x>:LABel:COLor command.

Description
  • This command sets or queries color of the specified math’s label. The math waveform is specified by x.
Usage
  • Using the .write(value) method will send the MATH:MATH<x>:LABel:COLor value command.
SCPI Syntax 
- MATH:MATH<x>:LABel:COLor <QString>
Info
  • <QString > is the color of the label. To return the color to the default color, send an empty string as in this example: :MATH:MATH1:LABEL:COLOR ‘’.

font property 

font: MathMathItemLabelFont

Return the MATH:MATH<x>:LABel:FONT command tree.

Usage
  • Using the .query() method will send the MATH:MATH<x>:LABel:FONT? query.
  • Using the .verify(value) method will send the MATH:MATH<x>:LABel:FONT? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .bold: The MATH:MATH<x>:LABel:FONT:BOLD command.
  • .italic: The MATH:MATH<x>:LABel:FONT:ITALic command.
  • .size: The MATH:MATH<x>:LABel:FONT:SIZE command.
  • .type: The MATH:MATH<x>:LABel:FONT:TYPE command.
  • .underline: The MATH:MATH<x>:LABel:FONT:UNDERline command.

name property 

name: MathMathItemLabelName

Return the MATH:MATH<x>:LABel:NAMe command.

Description
  • This command sets or queries the label string, which is used for annotating the math waveform on the screen. The math waveform to which the label is attached is specified by x.
Usage
  • Using the .query() method will send the MATH:MATH<x>:LABel:NAMe? query.
  • Using the .verify(value) method will send the MATH:MATH<x>:LABel:NAMe? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the MATH:MATH<x>:LABel:NAMe value command.
SCPI Syntax 
- MATH:MATH<x>:LABel:NAMe <QString>
- MATH:MATH<x>:LABel:NAMe?
Info
  • <QString> specifies the label to annotate the math waveform.

xpos property 

xpos: MathMathItemLabelXpos

Return the MATH:MATH<x>:LABel:XPOS command.

Description
  • This command sets or queries the X position of the specified math label. Maths are specified by x.
Usage
  • Using the .query() method will send the MATH:MATH<x>:LABel:XPOS? query.
  • Using the .verify(value) method will send the MATH:MATH<x>:LABel:XPOS? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the MATH:MATH<x>:LABel:XPOS value command.
SCPI Syntax 
- MATH:MATH<x>:LABel:XPOS <NR1>
- MATH:MATH<x>:LABel:XPOS?
Info
  • <NR1> is the location (in pixels) where the label for the selected math waveform is displayed, relative to the left edge of the display.

ypos property 

ypos: MathMathItemLabelYpos

Return the MATH:MATH<x>:LABel:YPOS command.

Description
  • This command sets or queries the y-position of the specified math label. The Math waveform is specified by x.
Usage
  • Using the .query() method will send the MATH:MATH<x>:LABel:YPOS? query.
  • Using the .verify(value) method will send the MATH:MATH<x>:LABel:YPOS? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the MATH:MATH<x>:LABel:YPOS value command.
SCPI Syntax 
- MATH:MATH<x>:LABel:YPOS <NR1>
- MATH:MATH<x>:LABel:YPOS?
Info
  • <NR1> is the location (in pixels) where the label for the selected math waveform is displayed, relative to the baseline of the waveform.

MathMathItemLabelColor

Bases: SCPICmdWrite

The MATH:MATH<x>:LABel:COLor command.

Description
  • This command sets or queries color of the specified math’s label. The math waveform is specified by x.
Usage
  • Using the .write(value) method will send the MATH:MATH<x>:LABel:COLor value command.
SCPI Syntax 
- MATH:MATH<x>:LABel:COLor <QString>
Info
  • <QString > is the color of the label. To return the color to the default color, send an empty string as in this example: :MATH:MATH1:LABEL:COLOR ‘’.

MathMathItemLabelFont

Bases: SCPICmdRead

The MATH:MATH<x>:LABel:FONT command tree.

Usage
  • Using the .query() method will send the MATH:MATH<x>:LABel:FONT? query.
  • Using the .verify(value) method will send the MATH:MATH<x>:LABel:FONT? query and raise an AssertionError if the returned value does not match value.
Properties
  • .bold: The MATH:MATH<x>:LABel:FONT:BOLD command.
  • .italic: The MATH:MATH<x>:LABel:FONT:ITALic command.
  • .size: The MATH:MATH<x>:LABel:FONT:SIZE command.
  • .type: The MATH:MATH<x>:LABel:FONT:TYPE command.
  • .underline: The MATH:MATH<x>:LABel:FONT:UNDERline command.

bold property 

bold: MathMathItemLabelFontBold

Return the MATH:MATH<x>:LABel:FONT:BOLD command.

Description
  • This command sets or queries the bold state of the specified math label. The math waveform is specified by x.
Usage
  • Using the .write(value) method will send the MATH:MATH<x>:LABel:FONT:BOLD value command.
SCPI Syntax 
- MATH:MATH<x>:LABel:FONT:BOLD {ON|OFF|<NR1>}
Info
  • <NR1> = 0 turns off bold, and any other integer turns on bold.
  • OFF turns off bold.
  • ON turns on bold.

italic property 

italic: MathMathItemLabelFontItalic

Return the MATH:MATH<x>:LABel:FONT:ITALic command.

Description
  • This command sets or queries italic state of the specified math label. The math waveform is specified by x.
Usage
  • Using the .write(value) method will send the MATH:MATH<x>:LABel:FONT:ITALic value command.
SCPI Syntax 
- MATH:MATH<x>:LABel:FONT:ITALic {ON|OFF|<NR1>}
Info
  • <NR1> = 0 turns off italic, and any other integer turns on italic.
  • OFF turns off italic.
  • ON turns on italic.

size property 

size: MathMathItemLabelFontSize

Return the MATH:MATH<x>:LABel:FONT:SIZE command.

Description
  • This command sets or queries font size of the specified math label. The math waveform is specified by x.
Usage
  • Using the .write(value) method will send the MATH:MATH<x>:LABel:FONT:SIZE value command.
SCPI Syntax 
- MATH:MATH<x>:LABel:FONT:SIZE <NR1>
Info
  • <NR1> sets the label size in points.

type property 

type: MathMathItemLabelFontType

Return the MATH:MATH<x>:LABel:FONT:TYPE command.

Description
  • This command sets or queries font type of the specified math label, such as Arial or Times New Roman. The math waveform is specified by x.
Usage
  • Using the .write(value) method will send the MATH:MATH<x>:LABel:FONT:TYPE value command.
SCPI Syntax 
- MATH:MATH<x>:LABel:FONT:TYPE <QString>
Info
  • <QString> is the name of the font type.

underline property 

underline: MathMathItemLabelFontUnderline

Return the MATH:MATH<x>:LABel:FONT:UNDERline command.

Description
  • This command sets or queries the underline state of the specified math label. The math waveform is specified by x.
Usage
  • Using the .write(value) method will send the MATH:MATH<x>:LABel:FONT:UNDERline value command.
SCPI Syntax 
- MATH:MATH<x>:LABel:FONT:UNDERline {ON|OFF|<NR1>}
Info
  • <NR1> = 0 turns off underline, and any other integer turns on underline.
  • OFF turns off underline.
  • ON turns on underline.

MathMathItemLabelFontBold

Bases: SCPICmdWrite

The MATH:MATH<x>:LABel:FONT:BOLD command.

Description
  • This command sets or queries the bold state of the specified math label. The math waveform is specified by x.
Usage
  • Using the .write(value) method will send the MATH:MATH<x>:LABel:FONT:BOLD value command.
SCPI Syntax 
- MATH:MATH<x>:LABel:FONT:BOLD {ON|OFF|<NR1>}
Info
  • <NR1> = 0 turns off bold, and any other integer turns on bold.
  • OFF turns off bold.
  • ON turns on bold.

MathMathItemLabelFontItalic

Bases: SCPICmdWrite

The MATH:MATH<x>:LABel:FONT:ITALic command.

Description
  • This command sets or queries italic state of the specified math label. The math waveform is specified by x.
Usage
  • Using the .write(value) method will send the MATH:MATH<x>:LABel:FONT:ITALic value command.
SCPI Syntax 
- MATH:MATH<x>:LABel:FONT:ITALic {ON|OFF|<NR1>}
Info
  • <NR1> = 0 turns off italic, and any other integer turns on italic.
  • OFF turns off italic.
  • ON turns on italic.

MathMathItemLabelFontSize

Bases: SCPICmdWrite

The MATH:MATH<x>:LABel:FONT:SIZE command.

Description
  • This command sets or queries font size of the specified math label. The math waveform is specified by x.
Usage
  • Using the .write(value) method will send the MATH:MATH<x>:LABel:FONT:SIZE value command.
SCPI Syntax 
- MATH:MATH<x>:LABel:FONT:SIZE <NR1>
Info
  • <NR1> sets the label size in points.

MathMathItemLabelFontType

Bases: SCPICmdWrite

The MATH:MATH<x>:LABel:FONT:TYPE command.

Description
  • This command sets or queries font type of the specified math label, such as Arial or Times New Roman. The math waveform is specified by x.
Usage
  • Using the .write(value) method will send the MATH:MATH<x>:LABel:FONT:TYPE value command.
SCPI Syntax 
- MATH:MATH<x>:LABel:FONT:TYPE <QString>
Info
  • <QString> is the name of the font type.

MathMathItemLabelFontUnderline

Bases: SCPICmdWrite

The MATH:MATH<x>:LABel:FONT:UNDERline command.

Description
  • This command sets or queries the underline state of the specified math label. The math waveform is specified by x.
Usage
  • Using the .write(value) method will send the MATH:MATH<x>:LABel:FONT:UNDERline value command.
SCPI Syntax 
- MATH:MATH<x>:LABel:FONT:UNDERline {ON|OFF|<NR1>}
Info
  • <NR1> = 0 turns off underline, and any other integer turns on underline.
  • OFF turns off underline.
  • ON turns on underline.

MathMathItemLabelName

Bases: SCPICmdWrite, SCPICmdRead

The MATH:MATH<x>:LABel:NAMe command.

Description
  • This command sets or queries the label string, which is used for annotating the math waveform on the screen. The math waveform to which the label is attached is specified by x.
Usage
  • Using the .query() method will send the MATH:MATH<x>:LABel:NAMe? query.
  • Using the .verify(value) method will send the MATH:MATH<x>:LABel:NAMe? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the MATH:MATH<x>:LABel:NAMe value command.
SCPI Syntax 
- MATH:MATH<x>:LABel:NAMe <QString>
- MATH:MATH<x>:LABel:NAMe?
Info
  • <QString> specifies the label to annotate the math waveform.

MathMathItemLabelXpos

Bases: SCPICmdWrite, SCPICmdRead

The MATH:MATH<x>:LABel:XPOS command.

Description
  • This command sets or queries the X position of the specified math label. Maths are specified by x.
Usage
  • Using the .query() method will send the MATH:MATH<x>:LABel:XPOS? query.
  • Using the .verify(value) method will send the MATH:MATH<x>:LABel:XPOS? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the MATH:MATH<x>:LABel:XPOS value command.
SCPI Syntax 
- MATH:MATH<x>:LABel:XPOS <NR1>
- MATH:MATH<x>:LABel:XPOS?
Info
  • <NR1> is the location (in pixels) where the label for the selected math waveform is displayed, relative to the left edge of the display.

MathMathItemLabelYpos

Bases: SCPICmdWrite, SCPICmdRead

The MATH:MATH<x>:LABel:YPOS command.

Description
  • This command sets or queries the y-position of the specified math label. The Math waveform is specified by x.
Usage
  • Using the .query() method will send the MATH:MATH<x>:LABel:YPOS? query.
  • Using the .verify(value) method will send the MATH:MATH<x>:LABel:YPOS? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the MATH:MATH<x>:LABel:YPOS value command.
SCPI Syntax 
- MATH:MATH<x>:LABel:YPOS <NR1>
- MATH:MATH<x>:LABel:YPOS?
Info
  • <NR1> is the location (in pixels) where the label for the selected math waveform is displayed, relative to the baseline of the waveform.

MathMathItemLin

Bases: SCPICmdRead

The MATH:MATH<x>:LIN command tree.

Usage
  • Using the .query() method will send the MATH:MATH<x>:LIN? query.
  • Using the .verify(value) method will send the MATH:MATH<x>:LIN? query and raise an AssertionError if the returned value does not match value.
Properties
  • .supportedfields: The MATH:MATH<x>:LIN:SUPPortedfields command.

supportedfields property 

supportedfields: MathMathItemLinSupportedfields

Return the MATH:MATH<x>:LIN:SUPPortedfields command.

Description
  • This command sets or queries the field type for the math for the bus source for LIN bus. The math waveform is specified by x.
Usage
  • Using the .query() method will send the MATH:MATH<x>:LIN:SUPPortedfields? query.
  • Using the .verify(value) method will send the MATH:MATH<x>:LIN:SUPPortedfields? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the MATH:MATH<x>:LIN:SUPPortedfields value command.
SCPI Syntax 
- MATH:MATH<x>:LIN:SUPPortedfields {DATa}
- MATH:MATH<x>:LIN:SUPPortedfields?
Info
  • DATa sets the field type to DATa.

MathMathItemLinSupportedfields

Bases: SCPICmdWrite, SCPICmdRead

The MATH:MATH<x>:LIN:SUPPortedfields command.

Description
  • This command sets or queries the field type for the math for the bus source for LIN bus. The math waveform is specified by x.
Usage
  • Using the .query() method will send the MATH:MATH<x>:LIN:SUPPortedfields? query.
  • Using the .verify(value) method will send the MATH:MATH<x>:LIN:SUPPortedfields? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the MATH:MATH<x>:LIN:SUPPortedfields value command.
SCPI Syntax 
- MATH:MATH<x>:LIN:SUPPortedfields {DATa}
- MATH:MATH<x>:LIN:SUPPortedfields?
Info
  • DATa sets the field type to DATa.

MathMathItemMdio

Bases: SCPICmdRead

The MATH:MATH<x>:MDIO command tree.

Usage
  • Using the .query() method will send the MATH:MATH<x>:MDIO? query.
  • Using the .verify(value) method will send the MATH:MATH<x>:MDIO? query and raise an AssertionError if the returned value does not match value.
Properties
  • .supportedfields: The MATH:MATH<x>:MDIO:SUPPortedfields command.

supportedfields property 

supportedfields: MathMathItemMdioSupportedfields

Return the MATH:MATH<x>:MDIO:SUPPortedfields command.

Description
  • This command sets or queries the field type for the math for the bus source for MDIO bus. The math waveform is specified by x.
Usage
  • Using the .query() method will send the MATH:MATH<x>:MDIO:SUPPortedfields? query.
  • Using the .verify(value) method will send the MATH:MATH<x>:MDIO:SUPPortedfields? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the MATH:MATH<x>:MDIO:SUPPortedfields value command.
SCPI Syntax 
- MATH:MATH<x>:MDIO:SUPPortedfields {DATa}
- MATH:MATH<x>:MDIO:SUPPortedfields?
Info
  • DATa sets the field type to DATa.

MathMathItemMdioSupportedfields

Bases: SCPICmdWrite, SCPICmdRead

The MATH:MATH<x>:MDIO:SUPPortedfields command.

Description
  • This command sets or queries the field type for the math for the bus source for MDIO bus. The math waveform is specified by x.
Usage
  • Using the .query() method will send the MATH:MATH<x>:MDIO:SUPPortedfields? query.
  • Using the .verify(value) method will send the MATH:MATH<x>:MDIO:SUPPortedfields? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the MATH:MATH<x>:MDIO:SUPPortedfields value command.
SCPI Syntax 
- MATH:MATH<x>:MDIO:SUPPortedfields {DATa}
- MATH:MATH<x>:MDIO:SUPPortedfields?
Info
  • DATa sets the field type to DATa.

MathMathItemMil1553b

Bases: SCPICmdRead

The MATH:MATH<x>:MIL1553B command tree.

Usage
  • Using the .query() method will send the MATH:MATH<x>:MIL1553B? query.
  • Using the .verify(value) method will send the MATH:MATH<x>:MIL1553B? query and raise an AssertionError if the returned value does not match value.
Properties
  • .supportedfields: The MATH:MATH<x>:MIL1553B:SUPPortedfields command.

supportedfields property 

supportedfields: MathMathItemMil1553bSupportedfields

Return the MATH:MATH<x>:MIL1553B:SUPPortedfields command.

Description
  • This command sets or queries the field type for the math for the bus source for MIL1553B bus. The math waveform is specified by x.
Usage
  • Using the .query() method will send the MATH:MATH<x>:MIL1553B:SUPPortedfields? query.
  • Using the .verify(value) method will send the MATH:MATH<x>:MIL1553B:SUPPortedfields? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the MATH:MATH<x>:MIL1553B:SUPPortedfields value command.
SCPI Syntax 
- MATH:MATH<x>:MIL1553B:SUPPortedfields {DATa|PAYLoad}
- MATH:MATH<x>:MIL1553B:SUPPortedfields?
Info
  • DATa sets the field type to DATa.
  • PAYLoad sets the field type to PAYLoad.

MathMathItemMil1553bSupportedfields

Bases: SCPICmdWrite, SCPICmdRead

The MATH:MATH<x>:MIL1553B:SUPPortedfields command.

Description
  • This command sets or queries the field type for the math for the bus source for MIL1553B bus. The math waveform is specified by x.
Usage
  • Using the .query() method will send the MATH:MATH<x>:MIL1553B:SUPPortedfields? query.
  • Using the .verify(value) method will send the MATH:MATH<x>:MIL1553B:SUPPortedfields? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the MATH:MATH<x>:MIL1553B:SUPPortedfields value command.
SCPI Syntax 
- MATH:MATH<x>:MIL1553B:SUPPortedfields {DATa|PAYLoad}
- MATH:MATH<x>:MIL1553B:SUPPortedfields?
Info
  • DATa sets the field type to DATa.
  • PAYLoad sets the field type to PAYLoad.

MathMathItemOnewire

Bases: SCPICmdRead

The MATH:MATH<x>:ONEWIRe command tree.

Usage
  • Using the .query() method will send the MATH:MATH<x>:ONEWIRe? query.
  • Using the .verify(value) method will send the MATH:MATH<x>:ONEWIRe? query and raise an AssertionError if the returned value does not match value.
Properties
  • .supportedfields: The MATH:MATH<x>:ONEWIRe:SUPPortedfields command.

supportedfields property 

supportedfields: MathMathItemOnewireSupportedfields

Return the MATH:MATH<x>:ONEWIRe:SUPPortedfields command.

Description
  • This command sets or queries the field type for the math for the bus source for ONEWIRe bus. The math waveform is specified by x.
Usage
  • Using the .query() method will send the MATH:MATH<x>:ONEWIRe:SUPPortedfields? query.
  • Using the .verify(value) method will send the MATH:MATH<x>:ONEWIRe:SUPPortedfields? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the MATH:MATH<x>:ONEWIRe:SUPPortedfields value command.
SCPI Syntax 
- MATH:MATH<x>:ONEWIRe:SUPPortedfields {DATa}
- MATH:MATH<x>:ONEWIRe:SUPPortedfields?
Info
  • DATa sets the field type to DATa.

MathMathItemOnewireSupportedfields

Bases: SCPICmdWrite, SCPICmdRead

The MATH:MATH<x>:ONEWIRe:SUPPortedfields command.

Description
  • This command sets or queries the field type for the math for the bus source for ONEWIRe bus. The math waveform is specified by x.
Usage
  • Using the .query() method will send the MATH:MATH<x>:ONEWIRe:SUPPortedfields? query.
  • Using the .verify(value) method will send the MATH:MATH<x>:ONEWIRe:SUPPortedfields? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the MATH:MATH<x>:ONEWIRe:SUPPortedfields value command.
SCPI Syntax 
- MATH:MATH<x>:ONEWIRe:SUPPortedfields {DATa}
- MATH:MATH<x>:ONEWIRe:SUPPortedfields?
Info
  • DATa sets the field type to DATa.

MathMathItemParallel

Bases: SCPICmdRead

The MATH:MATH<x>:PARallel command tree.

Usage
  • Using the .query() method will send the MATH:MATH<x>:PARallel? query.
  • Using the .verify(value) method will send the MATH:MATH<x>:PARallel? query and raise an AssertionError if the returned value does not match value.
Properties
  • .supportedfields: The MATH:MATH<x>:PARallel:SUPPortedfields command.

supportedfields property 

supportedfields: MathMathItemParallelSupportedfields

Return the MATH:MATH<x>:PARallel:SUPPortedfields command.

Description
  • This command sets or queries the field type for the math for the bus source for PARallel bus. The math waveform is specified by x.
Usage
  • Using the .query() method will send the MATH:MATH<x>:PARallel:SUPPortedfields? query.
  • Using the .verify(value) method will send the MATH:MATH<x>:PARallel:SUPPortedfields? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the MATH:MATH<x>:PARallel:SUPPortedfields value command.
SCPI Syntax 
- MATH:MATH<x>:PARallel:SUPPortedfields {DATa}
- MATH:MATH<x>:PARallel:SUPPortedfields?
Info
  • DATa sets the field type to DATa.

MathMathItemParallelSupportedfields

Bases: SCPICmdWrite, SCPICmdRead

The MATH:MATH<x>:PARallel:SUPPortedfields command.

Description
  • This command sets or queries the field type for the math for the bus source for PARallel bus. The math waveform is specified by x.
Usage
  • Using the .query() method will send the MATH:MATH<x>:PARallel:SUPPortedfields? query.
  • Using the .verify(value) method will send the MATH:MATH<x>:PARallel:SUPPortedfields? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the MATH:MATH<x>:PARallel:SUPPortedfields value command.
SCPI Syntax 
- MATH:MATH<x>:PARallel:SUPPortedfields {DATa}
- MATH:MATH<x>:PARallel:SUPPortedfields?
Info
  • DATa sets the field type to DATa.

MathMathItemPsifive

Bases: SCPICmdRead

The MATH:MATH<x>:PSIFIVe command tree.

Usage
  • Using the .query() method will send the MATH:MATH<x>:PSIFIVe? query.
  • Using the .verify(value) method will send the MATH:MATH<x>:PSIFIVe? query and raise an AssertionError if the returned value does not match value.
Properties
  • .supportedfields: The MATH:MATH<x>:PSIFIVe:SUPPortedfields command.

supportedfields property 

supportedfields: MathMathItemPsifiveSupportedfields

Return the MATH:MATH<x>:PSIFIVe:SUPPortedfields command.

Description
  • This command sets or queries the field type for the math for the bus source for PSIFIVe bus. The math waveform is specified by x.
Usage
  • Using the .query() method will send the MATH:MATH<x>:PSIFIVe:SUPPortedfields? query.
  • Using the .verify(value) method will send the MATH:MATH<x>:PSIFIVe:SUPPortedfields? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the MATH:MATH<x>:PSIFIVe:SUPPortedfields value command.
SCPI Syntax 
- MATH:MATH<x>:PSIFIVe:SUPPortedfields {DATa|DRA|DRB|SDATa}
- MATH:MATH<x>:PSIFIVe:SUPPortedfields?
Info
  • DATa sets the field type to DATa.
  • DRA sets the field type to DRA.
  • DRB sets the field type to DRB.
  • SDATa sets the field type to SDATa.

MathMathItemPsifiveSupportedfields

Bases: SCPICmdWrite, SCPICmdRead

The MATH:MATH<x>:PSIFIVe:SUPPortedfields command.

Description
  • This command sets or queries the field type for the math for the bus source for PSIFIVe bus. The math waveform is specified by x.
Usage
  • Using the .query() method will send the MATH:MATH<x>:PSIFIVe:SUPPortedfields? query.
  • Using the .verify(value) method will send the MATH:MATH<x>:PSIFIVe:SUPPortedfields? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the MATH:MATH<x>:PSIFIVe:SUPPortedfields value command.
SCPI Syntax 
- MATH:MATH<x>:PSIFIVe:SUPPortedfields {DATa|DRA|DRB|SDATa}
- MATH:MATH<x>:PSIFIVe:SUPPortedfields?
Info
  • DATa sets the field type to DATa.
  • DRA sets the field type to DRA.
  • DRB sets the field type to DRB.
  • SDATa sets the field type to SDATa.

MathMathItemRs232c

Bases: SCPICmdRead

The MATH:MATH<x>:RS232C command tree.

Usage
  • Using the .query() method will send the MATH:MATH<x>:RS232C? query.
  • Using the .verify(value) method will send the MATH:MATH<x>:RS232C? query and raise an AssertionError if the returned value does not match value.
Properties
  • .supportedfields: The MATH:MATH<x>:RS232C:SUPPortedfields command.

supportedfields property 

supportedfields: MathMathItemRs232cSupportedfields

Return the MATH:MATH<x>:RS232C:SUPPortedfields command.

Description
  • This command sets or queries the field type for the math for the bus source for RS232C bus. The math waveform is specified by x.
Usage
  • Using the .query() method will send the MATH:MATH<x>:RS232C:SUPPortedfields? query.
  • Using the .verify(value) method will send the MATH:MATH<x>:RS232C:SUPPortedfields? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the MATH:MATH<x>:RS232C:SUPPortedfields value command.
SCPI Syntax 
- MATH:MATH<x>:RS232C:SUPPortedfields {DATa|TXData|RXData}
- MATH:MATH<x>:RS232C:SUPPortedfields?
Info
  • DATa sets the field type to DATa.
  • TXData sets the field type to TXData. TXData field can be set when RS232 Bus configuration for Data Inputs is set to Two.
  • RXData sets the field type to RXData. RXData field can be set when RS232 Bus configuration for Data Inputs is set to Two.

MathMathItemRs232cSupportedfields

Bases: SCPICmdWrite, SCPICmdRead

The MATH:MATH<x>:RS232C:SUPPortedfields command.

Description
  • This command sets or queries the field type for the math for the bus source for RS232C bus. The math waveform is specified by x.
Usage
  • Using the .query() method will send the MATH:MATH<x>:RS232C:SUPPortedfields? query.
  • Using the .verify(value) method will send the MATH:MATH<x>:RS232C:SUPPortedfields? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the MATH:MATH<x>:RS232C:SUPPortedfields value command.
SCPI Syntax 
- MATH:MATH<x>:RS232C:SUPPortedfields {DATa|TXData|RXData}
- MATH:MATH<x>:RS232C:SUPPortedfields?
Info
  • DATa sets the field type to DATa.
  • TXData sets the field type to TXData. TXData field can be set when RS232 Bus configuration for Data Inputs is set to Two.
  • RXData sets the field type to RXData. RXData field can be set when RS232 Bus configuration for Data Inputs is set to Two.

MathMathItemSdlc

Bases: SCPICmdRead

The MATH:MATH<x>:SDLC command tree.

Usage
  • Using the .query() method will send the MATH:MATH<x>:SDLC? query.
  • Using the .verify(value) method will send the MATH:MATH<x>:SDLC? query and raise an AssertionError if the returned value does not match value.
Properties
  • .supportedfields: The MATH:MATH<x>:SDLC:SUPPortedfields command.

supportedfields property 

supportedfields: MathMathItemSdlcSupportedfields

Return the MATH:MATH<x>:SDLC:SUPPortedfields command.

Description
  • This command sets or queries the field type for the math for the bus source for SDLC bus. The math waveform is specified by x.
Usage
  • Using the .query() method will send the MATH:MATH<x>:SDLC:SUPPortedfields? query.
  • Using the .verify(value) method will send the MATH:MATH<x>:SDLC:SUPPortedfields? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the MATH:MATH<x>:SDLC:SUPPortedfields value command.
SCPI Syntax 
- MATH:MATH<x>:SDLC:SUPPortedfields {DATa}
- MATH:MATH<x>:SDLC:SUPPortedfields?
Info
  • DATa sets the field type to DATa.

MathMathItemSdlcSupportedfields

Bases: SCPICmdWrite, SCPICmdRead

The MATH:MATH<x>:SDLC:SUPPortedfields command.

Description
  • This command sets or queries the field type for the math for the bus source for SDLC bus. The math waveform is specified by x.
Usage
  • Using the .query() method will send the MATH:MATH<x>:SDLC:SUPPortedfields? query.
  • Using the .verify(value) method will send the MATH:MATH<x>:SDLC:SUPPortedfields? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the MATH:MATH<x>:SDLC:SUPPortedfields value command.
SCPI Syntax 
- MATH:MATH<x>:SDLC:SUPPortedfields {DATa}
- MATH:MATH<x>:SDLC:SUPPortedfields?
Info
  • DATa sets the field type to DATa.

MathMathItemSent

Bases: SCPICmdRead

The MATH:MATH<x>:SENT command tree.

Usage
  • Using the .query() method will send the MATH:MATH<x>:SENT? query.
  • Using the .verify(value) method will send the MATH:MATH<x>:SENT? query and raise an AssertionError if the returned value does not match value.
Properties
  • .supportedfields: The MATH:MATH<x>:SENT:SUPPortedfields command.

supportedfields property 

supportedfields: MathMathItemSentSupportedfields

Return the MATH:MATH<x>:SENT:SUPPortedfields command.

Description
  • This command sets or queries the field type for the math for the bus source for SENT bus. The math waveform is specified by x.
Usage
  • Using the .query() method will send the MATH:MATH<x>:SENT:SUPPortedfields? query.
  • Using the .verify(value) method will send the MATH:MATH<x>:SENT:SUPPortedfields? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the MATH:MATH<x>:SENT:SUPPortedfields value command.
SCPI Syntax 
- MATH:MATH<x>:SENT:SUPPortedfields {FCData|FCDFirst|FCDTwo|SDATa}
- MATH:MATH<x>:SENT:SUPPortedfields?
Info
  • FCData sets the field type to FCData. FCData field is available to select when SENT Bus configuration for Fast Data Channels is set to 2.
  • FCDFirst sets the field type to FCDFirst.
  • FCDTwo sets the field type to FCDTwo.
  • SDATa sets the field type to SDATa. SDATa is available when SENT Bus configuration for Slow Channel is not None.

MathMathItemSentSupportedfields

Bases: SCPICmdWrite, SCPICmdRead

The MATH:MATH<x>:SENT:SUPPortedfields command.

Description
  • This command sets or queries the field type for the math for the bus source for SENT bus. The math waveform is specified by x.
Usage
  • Using the .query() method will send the MATH:MATH<x>:SENT:SUPPortedfields? query.
  • Using the .verify(value) method will send the MATH:MATH<x>:SENT:SUPPortedfields? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the MATH:MATH<x>:SENT:SUPPortedfields value command.
SCPI Syntax 
- MATH:MATH<x>:SENT:SUPPortedfields {FCData|FCDFirst|FCDTwo|SDATa}
- MATH:MATH<x>:SENT:SUPPortedfields?
Info
  • FCData sets the field type to FCData. FCData field is available to select when SENT Bus configuration for Fast Data Channels is set to 2.
  • FCDFirst sets the field type to FCDFirst.
  • FCDTwo sets the field type to FCDTwo.
  • SDATa sets the field type to SDATa. SDATa is available when SENT Bus configuration for Slow Channel is not None.

MathMathItemSigneddata

Bases: SCPICmdWrite, SCPICmdRead

The MATH:MATH<x>:SIGNeddata command.

Description
  • This command sets or queries value to denote that bus field is decoded as signed/unsigned data for math on bus source. The math waveform is specified by x.
Usage
  • Using the .query() method will send the MATH:MATH<x>:SIGNeddata? query.
  • Using the .verify(value) method will send the MATH:MATH<x>:SIGNeddata? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the MATH:MATH<x>:SIGNeddata value command.
SCPI Syntax 
- MATH:MATH<x>:SIGNeddata {ON|OFF}
- MATH:MATH<x>:SIGNeddata?
Info
  • ON indicates that the bus field is decoded as signed data for drawing the math waveform.
  • OFF indicates that the bus field is decoded as unsigned data for drawing the math waveform.

MathMathItemSmbus

Bases: SCPICmdRead

The MATH:MATH<x>:SMBUS command tree.

Usage
  • Using the .query() method will send the MATH:MATH<x>:SMBUS? query.
  • Using the .verify(value) method will send the MATH:MATH<x>:SMBUS? query and raise an AssertionError if the returned value does not match value.
Properties
  • .supportedfields: The MATH:MATH<x>:SMBUS:SUPPortedfields command.

supportedfields property 

supportedfields: MathMathItemSmbusSupportedfields

Return the MATH:MATH<x>:SMBUS:SUPPortedfields command.

Description
  • This command sets or queries the field type for the math for the bus source for SMBUS bus. The math waveform is specified by x.
Usage
  • Using the .query() method will send the MATH:MATH<x>:SMBUS:SUPPortedfields? query.
  • Using the .verify(value) method will send the MATH:MATH<x>:SMBUS:SUPPortedfields? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the MATH:MATH<x>:SMBUS:SUPPortedfields value command.
SCPI Syntax 
- MATH:MATH<x>:SMBUS:SUPPortedfields {DATa}
- MATH:MATH<x>:SMBUS:SUPPortedfields?
Info
  • DATa sets the field type to DATa.

MathMathItemSmbusSupportedfields

Bases: SCPICmdWrite, SCPICmdRead

The MATH:MATH<x>:SMBUS:SUPPortedfields command.

Description
  • This command sets or queries the field type for the math for the bus source for SMBUS bus. The math waveform is specified by x.
Usage
  • Using the .query() method will send the MATH:MATH<x>:SMBUS:SUPPortedfields? query.
  • Using the .verify(value) method will send the MATH:MATH<x>:SMBUS:SUPPortedfields? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the MATH:MATH<x>:SMBUS:SUPPortedfields value command.
SCPI Syntax 
- MATH:MATH<x>:SMBUS:SUPPortedfields {DATa}
- MATH:MATH<x>:SMBUS:SUPPortedfields?
Info
  • DATa sets the field type to DATa.

MathMathItemSource1

Bases: SCPICmdWrite

The MATH:MATH<x>:SOUrce1 command.

Description
  • This command sets or queries the specified math source. The source in the command can be either 1 or 2. This command sets the Basic Math components in the user interface, with two sources and a function. You would also need to set the math type to Basic to see the change in the user interface but this will not effect the programmable interface. The math waveform and source are specified by x. SOURCE1 and SOURCE2 are for use when the MATH:MATH<x>:TYPE is BASIC.
Usage
  • Using the .write(value) method will send the MATH:MATH<x>:SOUrce1 value command.
SCPI Syntax 
- MATH:MATH<x>:SOUrce1 {S<x>_Ch<x>|CH<x>|MATH<x>|REF<x>}
Info
  • S<x>_Ch<x> specifies the remote scope number and the analog channel as the source.
  • CH<x> specifies an analog channel as the source.
  • Math<x> specifies a math waveform as the source.
  • REF<x> specifies a reference waveform as the source.

MathMathItemSpacewire

Bases: SCPICmdRead

The MATH:MATH<x>:SPACEWIRe command tree.

Usage
  • Using the .query() method will send the MATH:MATH<x>:SPACEWIRe? query.
  • Using the .verify(value) method will send the MATH:MATH<x>:SPACEWIRe? query and raise an AssertionError if the returned value does not match value.
Properties
  • .supportedfields: The MATH:MATH<x>:SPACEWIRe:SUPPortedfields command.

supportedfields property 

supportedfields: MathMathItemSpacewireSupportedfields

Return the MATH:MATH<x>:SPACEWIRe:SUPPortedfields command.

Description
  • This command sets or queries the field type for the math for the bus source for SPACEWIRe bus. The math waveform is specified by x.
Usage
  • Using the .query() method will send the MATH:MATH<x>:SPACEWIRe:SUPPortedfields? query.
  • Using the .verify(value) method will send the MATH:MATH<x>:SPACEWIRe:SUPPortedfields? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the MATH:MATH<x>:SPACEWIRe:SUPPortedfields value command.
SCPI Syntax 
- MATH:MATH<x>:SPACEWIRe:SUPPortedfields {DATa}
- MATH:MATH<x>:SPACEWIRe:SUPPortedfields?
Info
  • DATa sets the field type to DATa.

MathMathItemSpacewireSupportedfields

Bases: SCPICmdWrite, SCPICmdRead

The MATH:MATH<x>:SPACEWIRe:SUPPortedfields command.

Description
  • This command sets or queries the field type for the math for the bus source for SPACEWIRe bus. The math waveform is specified by x.
Usage
  • Using the .query() method will send the MATH:MATH<x>:SPACEWIRe:SUPPortedfields? query.
  • Using the .verify(value) method will send the MATH:MATH<x>:SPACEWIRe:SUPPortedfields? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the MATH:MATH<x>:SPACEWIRe:SUPPortedfields value command.
SCPI Syntax 
- MATH:MATH<x>:SPACEWIRe:SUPPortedfields {DATa}
- MATH:MATH<x>:SPACEWIRe:SUPPortedfields?
Info
  • DATa sets the field type to DATa.

MathMathItemSpectral

Bases: SCPICmdRead

The MATH:MATH<x>:SPECTral command tree.

Usage
  • Using the .query() method will send the MATH:MATH<x>:SPECTral? query.
  • Using the .verify(value) method will send the MATH:MATH<x>:SPECTral? query and raise an AssertionError if the returned value does not match value.
Properties
  • .horz: The MATH:MATH<x>:SPECTral:HORZ command.
  • .mag: The MATH:MATH<x>:SPECTral:MAG command.
  • .phase: The MATH:MATH<x>:SPECTral:PHASE command.
  • .source: The MATH:MATH<x>:SPECTral:SOUrce command.
  • .suppress: The MATH:MATH<x>:SPECTral:SUPPress command.
  • .type: The MATH:MATH<x>:SPECTral:TYPE command.
  • .unwrap: The MATH:MATH<x>:SPECTral:UNWRap command.
  • .window: The MATH:MATH<x>:SPECTral:WINdow command.

horz property 

horz: MathMathItemSpectralHorz

Return the MATH:MATH<x>:SPECTral:HORZ command.

Description
  • This command sets or queries the horizontal display scale of the spectral math waveform. The math waveform is specified by x.
Usage
  • Using the .query() method will send the MATH:MATH<x>:SPECTral:HORZ? query.
  • Using the .verify(value) method will send the MATH:MATH<x>:SPECTral:HORZ? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the MATH:MATH<x>:SPECTral:HORZ value command.
SCPI Syntax 
- MATH:MATH<x>:SPECTral:HORZ {LOG|LINEAr}
- MATH:MATH<x>:SPECTral:HORZ?
Info
  • LINEAr sets the SpectralMag units to linear.
  • LOG sets the SpectralMag units to log.

mag property 

mag: MathMathItemSpectralMag

Return the MATH:MATH<x>:SPECTral:MAG command.

Description
  • This command sets or queries the units of the SpectralMag function in the specified math definition string. The Math waveform is specified by x.
Usage
  • Using the .query() method will send the MATH:MATH<x>:SPECTral:MAG? query.
  • Using the .verify(value) method will send the MATH:MATH<x>:SPECTral:MAG? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the MATH:MATH<x>:SPECTral:MAG value command.
SCPI Syntax 
- MATH:MATH<x>:SPECTral:MAG {LINEAr|DBM}
- MATH:MATH<x>:SPECTral:MAG?
Info
  • LINEAR sets the SpectralMag units to linear.
  • DBM sets the SpectralMag units to decibels. It also sets the Ref Level Offset to a value that is the equivalent of 1 mW into 50 Ω.

phase property 

phase: MathMathItemSpectralPhase

Return the MATH:MATH<x>:SPECTral:PHASE command.

Description
  • This command sets or queries the units of a SpectralPhase function in the specified math definition string. The Math waveform is specified by x.
Usage
  • Using the .query() method will send the MATH:MATH<x>:SPECTral:PHASE? query.
  • Using the .verify(value) method will send the MATH:MATH<x>:SPECTral:PHASE? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the MATH:MATH<x>:SPECTral:PHASE value command.
SCPI Syntax 
- MATH:MATH<x>:SPECTral:PHASE {DEGrees|RADians|GROUPDelay}
- MATH:MATH<x>:SPECTral:PHASE?
Info
  • DEGREES sets the SpectralPhase units to degrees.
  • RADIANS sets the SpectralPhase units to radians.
  • GROUPDELAY sets the SpectralPhase units to groupdelay, which computes the derivative of unwrapped phase spectrum. Units are expressed in seconds.

source property 

source: MathMathItemSpectralSource

Return the MATH:MATH<x>:SPECTral:SOUrce command.

Description
  • This command sets or queries the specified spectral math source. This only works with a math of type FFT. The math waveform is specified by x. MATH:MATH<x>:SPECTRAL:SOURCE is for use when the MATH:MATH<x>:TYPE is FFT.
Usage
  • Using the .query() method will send the MATH:MATH<x>:SPECTral:SOUrce? query.
  • Using the .verify(value) method will send the MATH:MATH<x>:SPECTral:SOUrce? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the MATH:MATH<x>:SPECTral:SOUrce value command.
SCPI Syntax 
- MATH:MATH<x>:SPECTral:SOUrce {S<x>_Ch<x>|CH<x>|MATH<x>|REF<x>}
- MATH:MATH<x>:SPECTral:SOUrce?
Info
  • S<x>_Ch<x> specifies the remote scope number and the analog channel as the source.
  • CH<x> specifies an analog channel as the source.
  • Math<x> specifies a math waveform as the source.
  • REF<x> specifies a reference waveform as the source.

suppress property 

suppress: MathMathItemSpectralSuppress

Return the MATH:MATH<x>:SPECTral:SUPPress command.

Description
  • This command sets or queries whether suppression threshold for the specified math waveform is enabled. This is only applied when Spectral Plot type is Phase. The math waveform is specified by x.
Usage
  • Using the .query() method will send the MATH:MATH<x>:SPECTral:SUPPress? query.
  • Using the .verify(value) method will send the MATH:MATH<x>:SPECTral:SUPPress? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the MATH:MATH<x>:SPECTral:SUPPress value command.
SCPI Syntax 
- MATH:MATH<x>:SPECTral:SUPPress {ON|OFF|1|0}
- MATH:MATH<x>:SPECTral:SUPPress?
Info
  • 0 disables suppression threshold for the specified math waveform.
  • 1 enables suppression threshold for the specified math waveform.
  • ON enables suppression threshold for the specified math waveform.
  • OFF disables suppression threshold for the specified math waveform.
Sub-properties
  • .value: The MATH:MATH<x>:SPECTral:SUPPress:VALue command.

type property 

type: MathMathItemSpectralType

Return the MATH:MATH<x>:SPECTral:TYPE command.

Description
  • This command sets or queries the FFT type selected for spectral analysis. The math waveform is specified by x.
Usage
  • Using the .query() method will send the MATH:MATH<x>:SPECTral:TYPE? query.
  • Using the .verify(value) method will send the MATH:MATH<x>:SPECTral:TYPE? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the MATH:MATH<x>:SPECTral:TYPE value command.
SCPI Syntax 
- MATH:MATH<x>:SPECTral:TYPE {MAGNitude|PHASe|REAL|IMAGinary}
- MATH:MATH<x>:SPECTral:TYPE?
Info
  • MAGNitude specifies the magnitude spectral function.
  • PHASe specifies the phase spectral function.
  • REAL specifies the real spectral function.
  • IMAGinary specifies the imaginary spectral function.

unwrap property 

unwrap: MathMathItemSpectralUnwrap

Return the MATH:MATH<x>:SPECTral:UNWRap command.

Description
  • This command sets or queries whether phase unwrap of the spectral analyzer output data is enabled. The Math waveform is specified by x.
Usage
  • Using the .query() method will send the MATH:MATH<x>:SPECTral:UNWRap? query.
  • Using the .verify(value) method will send the MATH:MATH<x>:SPECTral:UNWRap? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the MATH:MATH<x>:SPECTral:UNWRap value command.
SCPI Syntax 
- MATH:MATH<x>:SPECTral:UNWRap {ON|OFF|1|0}
- MATH:MATH<x>:SPECTral:UNWRap?
Info
  • 0 disables phase unwrap for the specified math waveform.
  • 1 enables phase unwrap for the specified math waveform.
  • ON enables phase unwrap for the specified math waveform.
  • OFF disables phase unwrap for the specified math waveform.
Sub-properties
  • .degrees: The MATH:MATH<x>:SPECTral:UNWRap:DEGrees command.

window property 

window: MathMathItemSpectralWindow

Return the MATH:MATH<x>:SPECTral:WINdow command.

Description
  • This command sets or queries the window function used to apply the specified FFT window to the input data for the specified math waveform. The Math waveform is specified by x. A spectral window determines what the filter shape of the spectral analyzer will be in the frequency domain. It can be described by a mathematical function that is multiplied point-by-point times the input data to the spectral analyzer. Following is a list of arguments that specify the window function used to multiply the input data. The windows are listed in the order of their ability to resolve frequencies (resolution bandwidth).
Usage
  • Using the .query() method will send the MATH:MATH<x>:SPECTral:WINdow? query.
  • Using the .verify(value) method will send the MATH:MATH<x>:SPECTral:WINdow? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the MATH:MATH<x>:SPECTral:WINdow value command.
SCPI Syntax 
- MATH:MATH<x>:SPECTral:WINdow {RECTANGular|HAMMing|HANNing|BLACKMANHarris|KAISERBessel|GAUSSian|FLATTOP2|TEKEXPonential}
- MATH:MATH<x>:SPECTral:WINdow?
Info
  • RECTANGular window function is equivalent to multiplying all gate data by one.
  • HAMMing window function is based on a cosine series.
  • HANNing window function is based on a cosine series.
  • BLACKMANHarris window function is based on a cosine series.
  • KAISERBessel window function is based on a cosine series.
  • GAUSSian window function has the best localization characteristics in the joint time/frequency plane.
  • FLATTOP2 window function is a cosine series window with a flattened frequency response lobe.
  • TEKEXPonential window has an exponential nonsymmetrical shape in the time domain and a triangular shape in the frequency domain.

MathMathItemSpectralHorz

Bases: SCPICmdWrite, SCPICmdRead

The MATH:MATH<x>:SPECTral:HORZ command.

Description
  • This command sets or queries the horizontal display scale of the spectral math waveform. The math waveform is specified by x.
Usage
  • Using the .query() method will send the MATH:MATH<x>:SPECTral:HORZ? query.
  • Using the .verify(value) method will send the MATH:MATH<x>:SPECTral:HORZ? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the MATH:MATH<x>:SPECTral:HORZ value command.
SCPI Syntax 
- MATH:MATH<x>:SPECTral:HORZ {LOG|LINEAr}
- MATH:MATH<x>:SPECTral:HORZ?
Info
  • LINEAr sets the SpectralMag units to linear.
  • LOG sets the SpectralMag units to log.

MathMathItemSpectralMag

Bases: SCPICmdWrite, SCPICmdRead

The MATH:MATH<x>:SPECTral:MAG command.

Description
  • This command sets or queries the units of the SpectralMag function in the specified math definition string. The Math waveform is specified by x.
Usage
  • Using the .query() method will send the MATH:MATH<x>:SPECTral:MAG? query.
  • Using the .verify(value) method will send the MATH:MATH<x>:SPECTral:MAG? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the MATH:MATH<x>:SPECTral:MAG value command.
SCPI Syntax 
- MATH:MATH<x>:SPECTral:MAG {LINEAr|DBM}
- MATH:MATH<x>:SPECTral:MAG?
Info
  • LINEAR sets the SpectralMag units to linear.
  • DBM sets the SpectralMag units to decibels. It also sets the Ref Level Offset to a value that is the equivalent of 1 mW into 50 Ω.

MathMathItemSpectralPhase

Bases: SCPICmdWrite, SCPICmdRead

The MATH:MATH<x>:SPECTral:PHASE command.

Description
  • This command sets or queries the units of a SpectralPhase function in the specified math definition string. The Math waveform is specified by x.
Usage
  • Using the .query() method will send the MATH:MATH<x>:SPECTral:PHASE? query.
  • Using the .verify(value) method will send the MATH:MATH<x>:SPECTral:PHASE? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the MATH:MATH<x>:SPECTral:PHASE value command.
SCPI Syntax 
- MATH:MATH<x>:SPECTral:PHASE {DEGrees|RADians|GROUPDelay}
- MATH:MATH<x>:SPECTral:PHASE?
Info
  • DEGREES sets the SpectralPhase units to degrees.
  • RADIANS sets the SpectralPhase units to radians.
  • GROUPDELAY sets the SpectralPhase units to groupdelay, which computes the derivative of unwrapped phase spectrum. Units are expressed in seconds.

MathMathItemSpectralSource

Bases: SCPICmdWrite, SCPICmdRead

The MATH:MATH<x>:SPECTral:SOUrce command.

Description
  • This command sets or queries the specified spectral math source. This only works with a math of type FFT. The math waveform is specified by x. MATH:MATH<x>:SPECTRAL:SOURCE is for use when the MATH:MATH<x>:TYPE is FFT.
Usage
  • Using the .query() method will send the MATH:MATH<x>:SPECTral:SOUrce? query.
  • Using the .verify(value) method will send the MATH:MATH<x>:SPECTral:SOUrce? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the MATH:MATH<x>:SPECTral:SOUrce value command.
SCPI Syntax 
- MATH:MATH<x>:SPECTral:SOUrce {S<x>_Ch<x>|CH<x>|MATH<x>|REF<x>}
- MATH:MATH<x>:SPECTral:SOUrce?
Info
  • S<x>_Ch<x> specifies the remote scope number and the analog channel as the source.
  • CH<x> specifies an analog channel as the source.
  • Math<x> specifies a math waveform as the source.
  • REF<x> specifies a reference waveform as the source.

MathMathItemSpectralSuppress

Bases: SCPICmdWrite, SCPICmdRead

The MATH:MATH<x>:SPECTral:SUPPress command.

Description
  • This command sets or queries whether suppression threshold for the specified math waveform is enabled. This is only applied when Spectral Plot type is Phase. The math waveform is specified by x.
Usage
  • Using the .query() method will send the MATH:MATH<x>:SPECTral:SUPPress? query.
  • Using the .verify(value) method will send the MATH:MATH<x>:SPECTral:SUPPress? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the MATH:MATH<x>:SPECTral:SUPPress value command.
SCPI Syntax 
- MATH:MATH<x>:SPECTral:SUPPress {ON|OFF|1|0}
- MATH:MATH<x>:SPECTral:SUPPress?
Info
  • 0 disables suppression threshold for the specified math waveform.
  • 1 enables suppression threshold for the specified math waveform.
  • ON enables suppression threshold for the specified math waveform.
  • OFF disables suppression threshold for the specified math waveform.
Properties
  • .value: The MATH:MATH<x>:SPECTral:SUPPress:VALue command.

value property 

value: MathMathItemSpectralSuppressValue

Return the MATH:MATH<x>:SPECTral:SUPPress:VALue command.

Description
  • This command sets or queries in volts the value of suppression threshold of the specified math waveform. This requires the Spectral type to be Phase and the Suppression to be enabled for this PI command to have any affect. The math waveform is specified by x.
Usage
  • Using the .query() method will send the MATH:MATH<x>:SPECTral:SUPPress:VALue? query.
  • Using the .verify(value) method will send the MATH:MATH<x>:SPECTral:SUPPress:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the MATH:MATH<x>:SPECTral:SUPPress:VALue value command.
SCPI Syntax 
- MATH:MATH<x>:SPECTral:SUPPress:VALue <NR3>
- MATH:MATH<x>:SPECTral:SUPPress:VALue?
Info
  • <NR3> is the value of suppression threshold of the specified math waveform in volts.

MathMathItemSpectralSuppressValue

Bases: SCPICmdWrite, SCPICmdRead

The MATH:MATH<x>:SPECTral:SUPPress:VALue command.

Description
  • This command sets or queries in volts the value of suppression threshold of the specified math waveform. This requires the Spectral type to be Phase and the Suppression to be enabled for this PI command to have any affect. The math waveform is specified by x.
Usage
  • Using the .query() method will send the MATH:MATH<x>:SPECTral:SUPPress:VALue? query.
  • Using the .verify(value) method will send the MATH:MATH<x>:SPECTral:SUPPress:VALue? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the MATH:MATH<x>:SPECTral:SUPPress:VALue value command.
SCPI Syntax 
- MATH:MATH<x>:SPECTral:SUPPress:VALue <NR3>
- MATH:MATH<x>:SPECTral:SUPPress:VALue?
Info
  • <NR3> is the value of suppression threshold of the specified math waveform in volts.

MathMathItemSpectralType

Bases: SCPICmdWrite, SCPICmdRead

The MATH:MATH<x>:SPECTral:TYPE command.

Description
  • This command sets or queries the FFT type selected for spectral analysis. The math waveform is specified by x.
Usage
  • Using the .query() method will send the MATH:MATH<x>:SPECTral:TYPE? query.
  • Using the .verify(value) method will send the MATH:MATH<x>:SPECTral:TYPE? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the MATH:MATH<x>:SPECTral:TYPE value command.
SCPI Syntax 
- MATH:MATH<x>:SPECTral:TYPE {MAGNitude|PHASe|REAL|IMAGinary}
- MATH:MATH<x>:SPECTral:TYPE?
Info
  • MAGNitude specifies the magnitude spectral function.
  • PHASe specifies the phase spectral function.
  • REAL specifies the real spectral function.
  • IMAGinary specifies the imaginary spectral function.

MathMathItemSpectralUnwrap

Bases: SCPICmdWrite, SCPICmdRead

The MATH:MATH<x>:SPECTral:UNWRap command.

Description
  • This command sets or queries whether phase unwrap of the spectral analyzer output data is enabled. The Math waveform is specified by x.
Usage
  • Using the .query() method will send the MATH:MATH<x>:SPECTral:UNWRap? query.
  • Using the .verify(value) method will send the MATH:MATH<x>:SPECTral:UNWRap? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the MATH:MATH<x>:SPECTral:UNWRap value command.
SCPI Syntax 
- MATH:MATH<x>:SPECTral:UNWRap {ON|OFF|1|0}
- MATH:MATH<x>:SPECTral:UNWRap?
Info
  • 0 disables phase unwrap for the specified math waveform.
  • 1 enables phase unwrap for the specified math waveform.
  • ON enables phase unwrap for the specified math waveform.
  • OFF disables phase unwrap for the specified math waveform.
Properties
  • .degrees: The MATH:MATH<x>:SPECTral:UNWRap:DEGrees command.

degrees property 

degrees: MathMathItemSpectralUnwrapDegrees

Return the MATH:MATH<x>:SPECTral:UNWRap:DEGrees command.

Description
  • This command sets or queries how many degrees adjacent phase values can jump before being unwrapped. This requires the Spectral type to be Phase and the UNWRAP to be enabled for this PI command to have any affect. The math waveform is specified by x.
Usage
  • Using the .query() method will send the MATH:MATH<x>:SPECTral:UNWRap:DEGrees? query.
  • Using the .verify(value) method will send the MATH:MATH<x>:SPECTral:UNWRap:DEGrees? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the MATH:MATH<x>:SPECTral:UNWRap:DEGrees value command.
SCPI Syntax 
- MATH:MATH<x>:SPECTral:UNWRap:DEGrees <NR3>
- MATH:MATH<x>:SPECTral:UNWRap:DEGrees?
Info
  • <NR3> is the value of unwrap phase in degrees.

MathMathItemSpectralUnwrapDegrees

Bases: SCPICmdWrite, SCPICmdRead

The MATH:MATH<x>:SPECTral:UNWRap:DEGrees command.

Description
  • This command sets or queries how many degrees adjacent phase values can jump before being unwrapped. This requires the Spectral type to be Phase and the UNWRAP to be enabled for this PI command to have any affect. The math waveform is specified by x.
Usage
  • Using the .query() method will send the MATH:MATH<x>:SPECTral:UNWRap:DEGrees? query.
  • Using the .verify(value) method will send the MATH:MATH<x>:SPECTral:UNWRap:DEGrees? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the MATH:MATH<x>:SPECTral:UNWRap:DEGrees value command.
SCPI Syntax 
- MATH:MATH<x>:SPECTral:UNWRap:DEGrees <NR3>
- MATH:MATH<x>:SPECTral:UNWRap:DEGrees?
Info
  • <NR3> is the value of unwrap phase in degrees.

MathMathItemSpectralWindow

Bases: SCPICmdWrite, SCPICmdRead

The MATH:MATH<x>:SPECTral:WINdow command.

Description
  • This command sets or queries the window function used to apply the specified FFT window to the input data for the specified math waveform. The Math waveform is specified by x. A spectral window determines what the filter shape of the spectral analyzer will be in the frequency domain. It can be described by a mathematical function that is multiplied point-by-point times the input data to the spectral analyzer. Following is a list of arguments that specify the window function used to multiply the input data. The windows are listed in the order of their ability to resolve frequencies (resolution bandwidth).
Usage
  • Using the .query() method will send the MATH:MATH<x>:SPECTral:WINdow? query.
  • Using the .verify(value) method will send the MATH:MATH<x>:SPECTral:WINdow? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the MATH:MATH<x>:SPECTral:WINdow value command.
SCPI Syntax 
- MATH:MATH<x>:SPECTral:WINdow {RECTANGular|HAMMing|HANNing|BLACKMANHarris|KAISERBessel|GAUSSian|FLATTOP2|TEKEXPonential}
- MATH:MATH<x>:SPECTral:WINdow?
Info
  • RECTANGular window function is equivalent to multiplying all gate data by one.
  • HAMMing window function is based on a cosine series.
  • HANNing window function is based on a cosine series.
  • BLACKMANHarris window function is based on a cosine series.
  • KAISERBessel window function is based on a cosine series.
  • GAUSSian window function has the best localization characteristics in the joint time/frequency plane.
  • FLATTOP2 window function is a cosine series window with a flattened frequency response lobe.
  • TEKEXPonential window has an exponential nonsymmetrical shape in the time domain and a triangular shape in the frequency domain.

MathMathItemSpi

Bases: SCPICmdRead

The MATH:MATH<x>:SPI command tree.

Usage
  • Using the .query() method will send the MATH:MATH<x>:SPI? query.
  • Using the .verify(value) method will send the MATH:MATH<x>:SPI? query and raise an AssertionError if the returned value does not match value.
Properties
  • .supportedfields: The MATH:MATH<x>:SPI:SUPPortedfields command.

supportedfields property 

supportedfields: MathMathItemSpiSupportedfields

Return the MATH:MATH<x>:SPI:SUPPortedfields command.

Description
  • This command sets or queries the field type for the math for the bus source for SPI bus. The math waveform is specified by x.
Usage
  • Using the .query() method will send the MATH:MATH<x>:SPI:SUPPortedfields? query.
  • Using the .verify(value) method will send the MATH:MATH<x>:SPI:SUPPortedfields? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the MATH:MATH<x>:SPI:SUPPortedfields value command.
SCPI Syntax 
- MATH:MATH<x>:SPI:SUPPortedfields {DATa|MOSIdata|MISOdata}
- MATH:MATH<x>:SPI:SUPPortedfields?
Info
  • DATa sets the field type to DATa.
  • MOSIdata sets the field type to MOSIdata. MOSIdata field is available to select when SPI Bus configuration for Data Inputs is set to Two.
  • MISOdata sets the field type to MISOdata. MISOdata field is available to select when SPI Bus configuration for Data Inputs is set to Two.

MathMathItemSpiSupportedfields

Bases: SCPICmdWrite, SCPICmdRead

The MATH:MATH<x>:SPI:SUPPortedfields command.

Description
  • This command sets or queries the field type for the math for the bus source for SPI bus. The math waveform is specified by x.
Usage
  • Using the .query() method will send the MATH:MATH<x>:SPI:SUPPortedfields? query.
  • Using the .verify(value) method will send the MATH:MATH<x>:SPI:SUPPortedfields? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the MATH:MATH<x>:SPI:SUPPortedfields value command.
SCPI Syntax 
- MATH:MATH<x>:SPI:SUPPortedfields {DATa|MOSIdata|MISOdata}
- MATH:MATH<x>:SPI:SUPPortedfields?
Info
  • DATa sets the field type to DATa.
  • MOSIdata sets the field type to MOSIdata. MOSIdata field is available to select when SPI Bus configuration for Data Inputs is set to Two.
  • MISOdata sets the field type to MISOdata. MISOdata field is available to select when SPI Bus configuration for Data Inputs is set to Two.

MathMathItemSpmi

Bases: SCPICmdRead

The MATH:MATH<x>:SPMI command tree.

Usage
  • Using the .query() method will send the MATH:MATH<x>:SPMI? query.
  • Using the .verify(value) method will send the MATH:MATH<x>:SPMI? query and raise an AssertionError if the returned value does not match value.
Properties
  • .supportedfields: The MATH:MATH<x>:SPMI:SUPPortedfields command.

supportedfields property 

supportedfields: MathMathItemSpmiSupportedfields

Return the MATH:MATH<x>:SPMI:SUPPortedfields command.

Description
  • This command sets or queries the field type for the math for the bus source for SPMI bus. The math waveform is specified by x.
Usage
  • Using the .query() method will send the MATH:MATH<x>:SPMI:SUPPortedfields? query.
  • Using the .verify(value) method will send the MATH:MATH<x>:SPMI:SUPPortedfields? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the MATH:MATH<x>:SPMI:SUPPortedfields value command.
SCPI Syntax 
- MATH:MATH<x>:SPMI:SUPPortedfields {DATa|CDATa|RDATa}
- MATH:MATH<x>:SPMI:SUPPortedfields?
Info
  • DATa sets the field type to DATa.
  • CDATa sets the field type to CDATa.
  • RDATa sets the field type to RDATa.

MathMathItemSpmiSupportedfields

Bases: SCPICmdWrite, SCPICmdRead

The MATH:MATH<x>:SPMI:SUPPortedfields command.

Description
  • This command sets or queries the field type for the math for the bus source for SPMI bus. The math waveform is specified by x.
Usage
  • Using the .query() method will send the MATH:MATH<x>:SPMI:SUPPortedfields? query.
  • Using the .verify(value) method will send the MATH:MATH<x>:SPMI:SUPPortedfields? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the MATH:MATH<x>:SPMI:SUPPortedfields value command.
SCPI Syntax 
- MATH:MATH<x>:SPMI:SUPPortedfields {DATa|CDATa|RDATa}
- MATH:MATH<x>:SPMI:SUPPortedfields?
Info
  • DATa sets the field type to DATa.
  • CDATa sets the field type to CDATa.
  • RDATa sets the field type to RDATa.

MathMathItemSvid

Bases: SCPICmdRead

The MATH:MATH<x>:SVID command tree.

Usage
  • Using the .query() method will send the MATH:MATH<x>:SVID? query.
  • Using the .verify(value) method will send the MATH:MATH<x>:SVID? query and raise an AssertionError if the returned value does not match value.
Properties
  • .supportedfields: The MATH:MATH<x>:SVID:SUPPortedfields command.

supportedfields property 

supportedfields: MathMathItemSvidSupportedfields

Return the MATH:MATH<x>:SVID:SUPPortedfields command.

Description
  • This command sets or queries the field type for the math for the bus source for SVID bus. The math waveform is specified by x.
Usage
  • Using the .query() method will send the MATH:MATH<x>:SVID:SUPPortedfields? query.
  • Using the .verify(value) method will send the MATH:MATH<x>:SVID:SUPPortedfields? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the MATH:MATH<x>:SVID:SUPPortedfields value command.
SCPI Syntax 
- MATH:MATH<x>:SVID:SUPPortedfields {MPAYload|SPAYload}
- MATH:MATH<x>:SVID:SUPPortedfields?
Info
  • MPAYload sets the field type to MPAYload.
  • SPAYload sets the field type to SPAYload.

MathMathItemSvidSupportedfields

Bases: SCPICmdWrite, SCPICmdRead

The MATH:MATH<x>:SVID:SUPPortedfields command.

Description
  • This command sets or queries the field type for the math for the bus source for SVID bus. The math waveform is specified by x.
Usage
  • Using the .query() method will send the MATH:MATH<x>:SVID:SUPPortedfields? query.
  • Using the .verify(value) method will send the MATH:MATH<x>:SVID:SUPPortedfields? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the MATH:MATH<x>:SVID:SUPPortedfields value command.
SCPI Syntax 
- MATH:MATH<x>:SVID:SUPPortedfields {MPAYload|SPAYload}
- MATH:MATH<x>:SVID:SUPPortedfields?
Info
  • MPAYload sets the field type to MPAYload.
  • SPAYload sets the field type to SPAYload.

MathMathItemType

Bases: SCPICmdWrite

The MATH:MATH<x>:TYPe command.

Description
  • This command sets or queries the math type. The math waveform is specified by x.
Usage
  • Using the .write(value) method will send the MATH:MATH<x>:TYPe value command.
SCPI Syntax 
- MATH:MATH<x>:TYPe {BASic|FILTER|FFT|ADVanced}
Info
  • BASic set the type to basic math.
  • FILTER sets the math type to filter. Requires UDFLT licenses on 5, 6 series MSO instruments and Tekscope (Offline).
  • FFT sets the type to FFT math, which can use any live analog or reference waveform in the time domain. NOTE. You can also use FFT as part of a math expression by declaring the type.
  • ADVanced sets the type to advanced math.

MathMathItemUsb

Bases: SCPICmdRead

The MATH:MATH<x>:USB command tree.

Usage
  • Using the .query() method will send the MATH:MATH<x>:USB? query.
  • Using the .verify(value) method will send the MATH:MATH<x>:USB? query and raise an AssertionError if the returned value does not match value.
Properties
  • .supportedfields: The MATH:MATH<x>:USB:SUPPortedfields command.

supportedfields property 

supportedfields: MathMathItemUsbSupportedfields

Return the MATH:MATH<x>:USB:SUPPortedfields command.

Description
  • This command sets or queries the field type for the math for the bus source for USB bus. The math waveform is specified by x.
Usage
  • Using the .query() method will send the MATH:MATH<x>:USB:SUPPortedfields? query.
  • Using the .verify(value) method will send the MATH:MATH<x>:USB:SUPPortedfields? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the MATH:MATH<x>:USB:SUPPortedfields value command.
SCPI Syntax 
- MATH:MATH<x>:USB:SUPPortedfields {DATa}
- MATH:MATH<x>:USB:SUPPortedfields?
Info
  • DATa sets the field type to DATa.

MathMathItemUsbSupportedfields

Bases: SCPICmdWrite, SCPICmdRead

The MATH:MATH<x>:USB:SUPPortedfields command.

Description
  • This command sets or queries the field type for the math for the bus source for USB bus. The math waveform is specified by x.
Usage
  • Using the .query() method will send the MATH:MATH<x>:USB:SUPPortedfields? query.
  • Using the .verify(value) method will send the MATH:MATH<x>:USB:SUPPortedfields? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the MATH:MATH<x>:USB:SUPPortedfields value command.
SCPI Syntax 
- MATH:MATH<x>:USB:SUPPortedfields {DATa}
- MATH:MATH<x>:USB:SUPPortedfields?
Info
  • DATa sets the field type to DATa.

MathMathItemVunit

Bases: SCPICmdWrite

The MATH:MATH<x>:VUNIT command.

Description
  • This command specifies or returns the math custom vertical units. The math waveform is specified by x.
Usage
  • Using the .write(value) method will send the MATH:MATH<x>:VUNIT value command.
SCPI Syntax 
- MATH:MATH<x>:VUNIT <QString>
Info
  • <QString> is the custom vertical units.