search
¶
The search commands module.
These commands are used in the following models: TekScopePC
THIS FILE IS AUTO-GENERATED, IT SHOULD NOT BE MANUALLY MODIFIED.
Please report an issue if one is found.
Commands and Queries
- SEARCH:ADDNew <QString>
- SEARCH:DELETEALL
- SEARCH:DELete <QString>
- SEARCH:LIST?
- SEARCH:SEARCH<x>:COPy {SEARCHtotrigger|TRIGgertosearch}
- SEARCH:SEARCH<x>:NAVigate {NEXT|PREVious|MIN|NONE|MAX}
- SEARCH:SEARCH<x>:TOTAL?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:CONDition {SOW|LABel|DATa|LABELANDDATA|EOW|ERRor}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:CONDition?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:DATa:HIVALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:DATa:HIVALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:DATa:QUALifier {EQual|UNEQual|LESSthan|MOREthan|LESSEQual|MOREEQual|INrange|OUTrange}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:DATa:QUALifier?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:DATa:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:DATa:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:ERRTYPe {ANY|PARity|WORD|GAP}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:ERRTYPe?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:LABel:HIVALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:LABel:HIVALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:LABel:QUALifier {EQual|UNEQual|LESSthan|MOREthan|LESSEQual|MOREEQual|INrange|OUTrange}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:LABel:QUALifier?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:LABel:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:SDI:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:SDI:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:SSM:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:SSM:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:CONDition {SOF|DATa}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:CONDition?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:DATa:HITDMVALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:DATa:HITDMVALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:DATa:HIVALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:DATa:HIVALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:DATa:OFFSet <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:DATa:OFFSet?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:DATa:QUALifier {EQual|UNEQual|LESSthan|MOREthan|LESSEQual|MOREEQual|INrange|OUTrange}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:DATa:QUALifier?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:DATa:TDMVALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:DATa:TDMVALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:DATa:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:DATa:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:DATa:WORD {EITher|LEFt|RIGht}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:DATa:WORD?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:CONDition {SSD|SFD|MACADDRess|MACLENgth|IPHeader|TCPHeader|DATa|EOP|FCSError|QTAG}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:CONDition?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:DATa:HIVALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:DATa:HIVALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:DATa:OFFSet <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:DATa:OFFSet?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:DATa:SIZe <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:DATa:SIZe?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:DATa:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:DATa:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:IPHeader:DESTinationaddr:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:IPHeader:DESTinationaddr:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:IPHeader:PROTOcol:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:IPHeader:PROTOcol:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:IPHeader:SOUrceaddr:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:IPHeader:SOUrceaddr:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:MAC:ADDRess:DESTination:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:MAC:ADDRess:DESTination:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:MAC:ADDRess:SOUrce:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:MAC:ADDRess:SOUrce:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:MAC:LENgth:HIVALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:MAC:LENgth:HIVALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:MAC:LENgth:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:MAC:LENgth:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:QTAG:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:QTAG:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:QUALifier {LESSthan|MOREthan|EQual|UNEQual|LESSEQual|MOREEQual|INrange|OUTrange}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:QUALifier?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:TCPHeader:ACKnum:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:TCPHeader:ACKnum:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:TCPHeader:DESTinationport:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:TCPHeader:DESTinationport:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:TCPHeader:SEQnum:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:TCPHeader:SEQnum:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:TCPHeader:SOUrceport:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:TCPHeader:SOUrceport:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B:NRZ:CONDition {DATa}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B:NRZ:CONDition?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:BLOCKDATa:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:BLOCKDATa:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:CONDition {STARt|STATus|DATa|BLOCkid|SENSORSTATus|ERRors|STARTBIT|FUNCTIONCODe|ECUDATa|SENSORADDRess|REGISTERADDRess|CRCERRor}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:CONDition?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:DATABITs {FOURBIT|EIGHTBIT|TWENTYBIT}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:DATABITs?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:DATa:ECU:SENSor:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:DATa:ECU:SENSor:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:DATa:REGion:A:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:DATa:REGion:A:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:DATa:REGion:B:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:DATa:REGion:B:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:ERRORTYPe {ANY|PARity|CRC|RESPONSECODe}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:ERRORTYPe?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:FUNCTIONCODETYPe <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:FUNCTIONCODETYPe?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:REGISTERADDRess {TWOBIT|SIXBIT|EIGHTBIT}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:REGISTERADDRess?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:REGister:ADDRess:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:REGister:ADDRess:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:SENSORSTATus:TYPe {READy|BUSY|DEFect|SERVICEMODe|UNLocked}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:SENSORSTATus:TYPe?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:SENSor:ADDRess:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:SENSor:ADDRess:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:STATus:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:STATus:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B:S8B10B:CONDition {SYMbols|ERRors}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B:S8B10B:CONDition?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:CONDition {SOF|FRAMEtype|IDentifier|DATa|IDANDDATA|EOF|ERRor|FDBITS}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:CONDition?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:DIRection {READ|WRITE|NOCARE}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:DIRection?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:OFFSet <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:OFFSet?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:QUALifier {EQUal|LESSEQual|MOREEQua|UNEQual|LESSthan|MOREthan}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:QUALifier?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:SIZe <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:SIZe?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:ERRType {ACKMISS|BITSTUFFing|FORMERRor|ANYERRor}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:ERRType?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:FD:BRSBit {ONE|ZERo|NOCARE}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:FD:BRSBit?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:FD:ESIBit {ONE|ZERo|NOCARE}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:FD:ESIBit?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:FRAMEtype {DATa|ERRor|OVERLoad|REMote}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:FRAMEtype?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:IDentifier:MODe {EXTENDed|STandard}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:IDentifier:MODe?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:IDentifier:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:IDentifier:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:BLUe:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:BLUe:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:CONDition {SOT|EOT|DATa|EOTPDATa|OPTIONALPARam|SCRambling|COMPression|PACKets|BUSTURNAROUnd|ESCAPEMODe|STop|ERRors|MODe|WORD|SYMBol}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:CONDition?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:DATa:SIZe <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:DATa:SIZe?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:DATa:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:DATa:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:ERRor:TYPe {ANY|ECC|CRC}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:ERRor:TYPe?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:ESCAPEMODe:COMMand {LPDT|ULPS|RESETTRIGger|ANY}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:ESCAPEMODe:COMMand?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:GREen:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:GREen:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:MODe:TYPe {HS|LP}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:MODe:TYPe?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:PACKets:LIST {VSYNCSTART|VSYNCEND|HSYNCSTART|HSYNCEND|EOTP|COLOROFF|COLORON|SHUTDOWN|TURNON|GSW|GR|COMPRESSION|SCRAMBLING|EXECUTEQUEue|DCSSW|DCSR|GLONGWRITE|DSINULL|DSIBLANk|MAXRETSIZE|DCSGLONGWRITE|PICPARameter|COMPRESSEDPSTReam|PPS101010|PPS121212|PPS565|PPS666|LPS666|PPS888|YCBCR24|LPYCBCR24|YCBCR16|YCBCR12|ACKNowledge|ERRORREPort|GSRR|GLONGREAD|DCSLONGREAD|DCSSRR|FRAMESTARt|FRAMEEND|LINESTARt|LINEEND|GSP|CSINULL|CSIBLANk|EMBEDDED|USEREIGHTB|RGB565|RGB555|RGB444|RGB666|RAW6|RAW7|RAW8|RAW10|RAW12|RAW14|RAW16|RAW20|RGB888|YUV420L8|YUV8BIT|YUV422B10|YUV420B10}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:PACKets:LIST?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:PACKets:TYPe {SHORt|LONG}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:PACKets:TYPe?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:PIXel:NUMBer <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:PIXel:NUMBer?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:PIXel:SEARCHOPTion {PIXELVALue|PIXELNUMBer}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:PIXel:SEARCHOPTion?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:RED:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:RED:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:SYMBol:SIZe <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:SYMBol:SIZe?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:SYMBol:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:SYMBol:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:WORD:SIZe <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:WORD:SIZe?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:WORD:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:WORD:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:WORDCOUNt:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:WORDCOUNt:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:YCBCR:CB <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:YCBCR:CB?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:YCBCR:CR <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:YCBCR:CR?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:YCBCR:Y <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:YCBCR:Y?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:YUV:U <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:YUV:U?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:YUV:V <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:YUV:V?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:YUV:Y <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:YUV:Y?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:CONDition {STARt|FRAMes|FRAMEID|PTYPe|DLC|EXTDLC|NETMN|COUNter|DATa|ERRors}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:CONDition?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:COUNter:VALue <Qstring>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:COUNter:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:DATa:SIZe <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:DATa:SIZe?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:DATa:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:DATa:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:DLC:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:DLC:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:ERROR:TYPe {CRC|PARity|FRAMe|IBS|ANY}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:ERROR:TYPe?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:EXTDLC:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:EXTDLC:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:FRAMEID:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:FRAMEID:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:FRAMe:TYPe {NORMal|SLEep|LONG|POLLINGNORMal|POLLINGLONG}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:FRAMe:TYPe?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:NETMN:SLEEPIND {ON|OFF|EITHer}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:NETMN:SLEEPIND?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:NETMN:WAKEUPIND {ON|OFF|EITHer}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:NETMN:WAKEUPIND?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:BLUe:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:BLUe:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:CONDition {SOT|EOT|DATa|EOTPDATa|OPTIONALPARam|SCRambling|COMPression|PACKets|BUSTURNAROUnd|ESCAPEMODe|STop|ERRors|MODe}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:CONDition?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:DATa:SIZe <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:DATa:SIZe?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:DATa:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:DATa:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:ERRor:TYPe {ANY|ECC|CRC}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:ERRor:TYPe?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:ESCAPEMODe:COMMand {LPDT|ULPS|RESETTRIGger|ANY}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:ESCAPEMODe:COMMand?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:GREen:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:GREen:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:MODe:TYPe {HS|LP}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:MODe:TYPe?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:PACKets:LIST {VSYNCSTART|VSYNCEND|HSYNCSTART|HSYNCEND|EOTP|COLOROFF|COLORON|SHUTDOWN|TURNON|GSW|GR|COMPRESSION|SCRAMBLING|EXECUTEQUEue|DCSSW|DCSR|GLONGWRITE|DSINULL|DSIBLANk|MAXRETSIZE|DCSGLONGWRITE|PICPARameter|COMPRESSEDPSTReam|PPS101010|PPS121212|PPS565|PPS666|LPS666|PPS888|YCBCR24|LPYCBCR24|YCBCR16|YCBCR12|ACKNowledge|ERRORREPort|GSRR|GLONGREAD|DCSLONGREAD|DCSSRR|FRAMESTARt|FRAMEEND|LINESTARt|LINEEND|GSP|CSINULL|CSIBLANk|EMBEDDED|USEREIGHTB|RGB565|RGB555|RGB444|RGB666|RAW6|RAW7|RAW8|RAW10|RAW12|RAW14|RAW16|RAW20|RGB888|YUV420L8|YUV8BIT|YUV422B10|YUV420B10}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:PACKets:LIST?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:PACKets:TYPe {SHORt|LONG}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:PACKets:TYPe?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:PIXel:NUMBer <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:PIXel:NUMBer?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:PIXel:SEARCHOPTion {PIXELVALue|PIXELNUMBer}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:PIXel:SEARCHOPTion?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:RED:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:RED:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:WORDCOUNt:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:WORDCOUNt:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:YCBCR:CB <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:YCBCR:CB?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:YCBCR:CR <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:YCBCR:CR?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:YCBCR:Y <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:YCBCR:Y?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:YUV:U <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:YUV:U?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:YUV:V <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:YUV:V?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:YUV:Y <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:YUV:Y?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:ADDRess:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:ADDRess:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:COMMAND:OPCode {GETSTATus|GETCONFig|SETCONFig|GETNP|GETPC|PUTNP|PUTPC|PUTIORDSHORt|PUTIOWRSHORt|PUTMEMRD32SHORt|PUTMEMWR32SHORt|PUTOOB|GETOOB|PUTFLASHC|GETFLASHNP|PUTVWIRe|GETVWIRe}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:COMMAND:OPCode?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:CONDition {STARt|CHINDependent|PERICHANnel|OOBCHANnel|VWCHANnel|FACHANnel|DATa|STATus|ERRors|WAIT|END}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:CONDition?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:CYCLETYPe {MEMRD32|MEMRD64|MEMWR32|MEMWR64|MESSage|MSGWITHDATa|SUCCESSNODATa|SUCCESSDATa|UNSUCCESSNODATa|OOBSMBUS|MCTP|FLASHREAD|FLASHWRITe|FLASHERASe|FLSUCCESSNODATa|FLSUCCESSDATa|FLUNSUCCESSNODATa}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:CYCLETYPe?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:DATa:SIZe <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:DATa:SIZe?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:DATa:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:DATa:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:ERRor:TYPe {CRC|DEFer|FATal|NONFATal|NORESPonse|CMDOPCODe|CYCLETYPe}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:ERRor:TYPe?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:LENGth:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:LENGth:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:PHASe {COMMand|RESPONSE|RESPONSEHEADer|RESPONSENOHEADer}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:PHASe?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:RESPCYCLE:TYPe {MEMRDWR32|MEMRDWR64|MESSage|MSGWITHDATa|SUCCESSNODATa|SUCCESSDATa|UNSUCCESSNODATa|LTR|FLASHREAD|FLASHWRITe|FLASHERASe}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:RESPCYCLE:TYPe?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:SMBUS:DESTination:ADDRess <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:SMBUS:DESTination:ADDRess?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:SMBUS:SLAVe:ADDRess <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:SMBUS:SLAVe:ADDRess?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:TAG:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:TAG:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:VIRTUALWIRe:COUNt:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:VIRTUALWIRe:COUNt:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:VIRTUALWIRe:DATa:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:VIRTUALWIRe:DATa:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:VIRTUALWIRe:INDex:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:VIRTUALWIRe:INDex:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:VIRTUALWIRe:RESPonse:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:VIRTUALWIRe:RESPonse:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:VIRTUALWIRe:STATus:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:VIRTUALWIRe:STATus:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:ADDRESSMODe {DEVice|LOGical}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:ADDRESSMODe?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:CNTNV:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:CNTNV:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:COMMANDTYPe {NOP|APRD|APWR|APRW|FPRD|FPWR|FPRW|BRD|BWR|BRW|LRD|LWR|LRW|ARMW|FRMW|REServed}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:COMMANDTYPe?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:CONDition {SOF|PROTocol|IPHEADer|UDPIPHEADer|MACADDRess|TCI|ECATHEADERLENGth|DATagram|NETWORKVARiable|MAILBOX|FCSERRor|EOF}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:CONDition?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:CYC:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:CYC:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:DATAGRAM {HEADer|DATa|WKC}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:DATAGRAM?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:DATAGRAMHEADer {CMD|IDX|ADDRess|LEN|CIRCulating|IRQ}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:DATAGRAMHEADer:LENGth <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:DATAGRAMHEADer:LENGth?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:DATAGRAMHEADer?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:DATa:SIZe <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:DATa:SIZe?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:DATa:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:DATa:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:DESTINATIONADDRess:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:DESTINATIONADDRess:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:DEVICEADDRess {POSition|OFFSet}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:DEVICEADDRess?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:ERRor:REPLy:SERVice:DATa {TYPe|DETail}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:ERRor:REPLy:SERVice:DATa?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:FRAMETYPe {BASic|UDPIP}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:FRAMETYPe?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:HASH:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:HASH:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:HEADer:LENGth <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:HEADer:LENGth?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:IDENtification:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:IDENtification:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:IDX:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:IDX:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:INDex:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:INDex:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:IPDESTination:ADDRess:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:IPDESTination:ADDRess:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:IPSOURce:ADDRess:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:IPSOURce:ADDRess:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:IRQ:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:IRQ:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:LEN:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:LEN:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:LOGICALADDRess:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:LOGICALADDRess:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:MAILBOXTYPe {ZERo|ONE|TWO|THRee|FOUR|FIVe|RESERved|FIFTeen}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:MAILBOXTYPe?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:MAILbox {MAILBOXHEADer|SERVICEDATa|ERRSERVICEDATa}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:MAILbox:ADDRess:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:MAILbox:ADDRess:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:MAILbox:CNT:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:MAILbox:CNT:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:MAILbox:DETail {ONE|TWO|THRee|FOUR|FIVe|SIX|SEVEn|EIGHt|NINe}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:MAILbox:DETail?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:MAILbox:HEADer {LENGth|ADDRess|CHANnel|PRIority|TYPe|CNT}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:MAILbox:HEADer?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:MAILbox?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:NETWORKVARiable:DATa:SIZe <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:NETWORKVARiable:DATa:SIZe?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:NETWORKVARiable:DATa:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:NETWORKVARiable:DATa:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:NETWork:VARiable {PUBHEADer|NVHEADer|NVDATa}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:NETWork:VARiable:HEADer {INDex|HASH|NVLEN|Q}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:NETWork:VARiable:HEADer?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:NETWork:VARiable?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:OFFSet:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:OFFSet:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:POSition:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:POSition:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:PROTOCOLTYPe {PDU|NETWORKVARiables|MAILbox}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:PROTOCOLTYPe?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:PUBID:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:PUBID:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:QUALity:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:QUALity:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:SERVice:DATa:LENGth <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:SERVice:DATa:LENGth?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:SERVice:DATa:SIZe <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:SERVice:DATa:SIZe?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:SERVice:DATa:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:SERVice:DATa:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:SOURCEADDRess:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:SOURCEADDRess:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:SRC:PORT:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:SRC:PORT:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:TCI:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:TCI:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:WKC:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:WKC:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:CONDition {SFD|MACADDRess|MACLENgth|IPHeader|TCPHeader|DATa|EOP|IDLe|FCSError|QTAG}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:CONDition?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:DATa:HIVALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:DATa:HIVALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:DATa:OFFSet <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:DATa:OFFSet?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:DATa:QUALifier {LESSthan|MOREthan|EQual|UNEQual|LESSEQual|MOREEQual|INrange|OUTrange}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:DATa:QUALifier?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:DATa:SIZe <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:DATa:SIZe?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:DATa:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:DATa:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:IPHeader:DESTinationaddr:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:IPHeader:DESTinationaddr:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:IPHeader:PROTOcol:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:IPHeader:PROTOcol:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:IPHeader:SOUrceaddr:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:IPHeader:SOUrceaddr:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:ADDRess:DESTination:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:ADDRess:DESTination:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:ADDRess:SOUrce:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:ADDRess:SOUrce:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:LENgth:HIVALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:LENgth:HIVALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:LENgth:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:LENgth:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:QTAG:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:QTAG:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:ACKnum:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:ACKnum:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:DESTinationport:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:DESTinationport:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:SEQnum:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:SEQnum:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:SOUrceport:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:SOUrceport:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:ADDress:HIVALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:ADDress:HIVALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:ADDress:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:ADDress:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:CONDition {SYNC|HANDSHAKEPacket|SPECIALPacket|ERRor|TOKENPacket|DATAPacket|RESET|CONNect|CONTROLMESSage|SUSPEND|DEVICEChirp|HOSTChirp|PORTReset|PORTConfiguration|RESUME|EOP}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:CONDition?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:DATABITS:SIZe <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:DATABITS:SIZe?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:DATa:HIVALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:DATa:HIVALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:DATa:OFFSet <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:DATa:OFFSet?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:DATa:QUAlifier {EQual|UNEQual|LESSthan|MOREthan|LESSEQual|MOREEQual|Inrange|OUTrange}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:DATa:QUAlifier?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:DATa:SIZe <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:DATa:SIZe?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:DATa:TYPe {ANY|DATA0|DATA1|DATA2|MDATA}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:DATa:TYPe?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:DATa:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:DATa:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:ENDPoint:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:ENDPoint:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:ENDSEARch {OFF|ON}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:ENDSEARch?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:EOP:DATABITS:SIZe <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:EOP:DATABITS:SIZe?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:EOP:QUAlifier {EQual|UNEQual|LESSthan|MOREthan|LESSEQual|MOREEQual|INrange|OUTrange}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:EOP:QUAlifier?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:EOPBITS:MAX:SIZe <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:EOPBITS:MAX:SIZe?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:EOPBITS:MIN:SIZe <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:EOPBITS:MIN:SIZe?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:ERRType {BITSTUFFing|CRC5|CRC16|PID}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:ERRType?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:HANDSHAKEType {ANY|ACK|NAK|STALL|NYET}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:HANDSHAKEType?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:RAP:ADDress:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:RAP:ADDress:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:RAP:COMMand {ALL|WRITe|READ|CLEar|SET}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:RAP:COMMand?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:RAP:DATa:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:RAP:DATa:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:RAP:OPTion {COMMand|ADDRess|RAPDATa}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:RAP:OPTion?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SOFFRAMENUMber <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SOFFRAMENUMber?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPECIALType {ANY|PREamble|ERROr|SPLit|PING|RESERVed}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPECIALType?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPLit:ET:VALue {NOCARE|CONTRol|ISOchronous|BULK|INTERRUPT}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPLit:ET:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPLit:HUB:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPLit:HUB:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPLit:PORT:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPLit:PORT:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPLit:SC:VALue {NOCARE|SSPLIT|CSPLIT}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPLit:SC:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPLit:SE:VALue {NOCARE|FULLSPEED|LOWSPEED|ISOSTART|ISOMID|ISOEND|ISOALL}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPLit:SE:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SYNC:QUAlifier {EQual|UNEQual|LESSthan|MOREthan|LESSEQual|MOREEQual|INrange|OUTrange}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SYNC:QUAlifier?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SYNCBITS:MAX:SIZe <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SYNCBITS:MAX:SIZe?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SYNCBITS:MIN:SIZe <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SYNCBITS:MIN:SIZe?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SYNCSEARch {OFF|ON}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SYNCSEARch?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:TOKENType {ANY|SOF|OUT|IN|SETUP}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:TOKENType?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:CONDition {SOF|FRAMEType|IDentifier|CYCLEcount|HEADer|DATA|IDANDDATA|EOF|ERRor}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:CONDition?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:CYCLEcount:HIVALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:CYCLEcount:HIVALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:CYCLEcount:QUALifier {EQUal|LESSEQual|MOREEQual|UNEQual|LESSthan|MOREthan|INrange|OUTrange}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:CYCLEcount:QUALifier?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:CYCLEcount:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:CYCLEcount:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:DATa:HIVALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:DATa:HIVALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:DATa:OFFSet <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:DATa:OFFSet?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:DATa:QUALifier {EQUal|LESSEQual|MOREEQual|UNEQual|LESSthan|MOREthan|INrange|OUTrange}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:DATa:QUALifier?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:DATa:SIZe <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:DATa:SIZe?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:DATa:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:DATa:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:EOFTYPE {ANY|STATIC|DYNAMIC}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:EOFTYPE?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:ERRTYPE {CRCHeader|CRCTrailer|NULLFRStatic|NULLFRDynamic|SYNCFrame|STARTupnosync}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:ERRTYPE?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:FRAMEID:HIVALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:FRAMEID:HIVALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:FRAMEID:QUALifier {EQual|UNEQual|LESSthan|MOREthan|LESSEQual|MOREEQual|INrange|OUTrange}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:FRAMEID:QUALifier?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:FRAMEID:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:FRAMEID:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:FRAMEType {NORMal|PAYload|NULL|SYNC|STARTup}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:FRAMEType?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:HEADER:CRC <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:HEADER:CRC?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:HEADER:CYCLECount <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:HEADER:CYCLECount?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:HEADER:FRAMEID <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:HEADER:FRAMEID?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:HEADER:INDBits <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:HEADER:INDBits?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:HEADER:PAYLENgth <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:HEADER:PAYLENgth?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:ADDRess:MODe {ADDR10|ADDR7}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:ADDRess:MODe?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:ADDRess:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:ADDRess:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:CONDition {ADDRess|ADDRANDDATA|DATa|ACKMISS|REPEATstart|STARt|STOP}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:CONDition?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:DATa:DIRection {NOCARE|READ|WRITE}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:DATa:DIRection?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:DATa:SIZe <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:DATa:SIZe?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:DATa:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:DATa:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:ADDRess:MODe {ADDR10|ADDR7}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:ADDRess:MODe?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:ADDRess:VALue <Qstring>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:ADDRess:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:BCR:VALue <Qstring>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:BCR:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:BCRType:VALue <Qstring>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:BCRType:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:BPACKets {RESPonse|BROadcast}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:BPACKets?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:BRGTID:VALue <Qstring>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:BRGTID:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:CCODe:VALue <Qstring>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:CCODe:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:CONDition {STARt|REPEATStart|ADDRess|DATa|SDRDirect|SDRBroadcast|DDR|ERRors|HOTJoin|DMSGEnd|BMSGEnd|HDRRestart|HDRExit}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:CONDition?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:DATa:DIRection {NOCARE|READ|WRITE}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:DATa:DIRection?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:DATa:SIZe <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:DATa:SIZe?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:DATa:VALue <Qstring>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:DATa:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:DCR:VALue <Qstring>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:DCR:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:DCRType:VALue <Qstring>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:DCRType:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:DWORd:VALue <Qstring>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:DWORd:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:ERRORTYPe {NACK|TBIT|PARity|BADDr|DADDr|PREamble|CRC}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:ERRORTYPe?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:EVENTBYTe:VALue <Qstring>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:EVENTBYTe:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:FREQBYTe:VALue <Qstring>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:FREQBYTe:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:GSLSb:VALue <Qstring>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:GSLSb:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:GSMSb:VALue <Qstring>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:GSMSb:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:ID:VALue <Qstring>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:ID:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:INACCBYTe:VALue <Qstring>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:INACCBYTe:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:MAXREAD:VALue <Qstring>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:MAXREAD:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:MAXRTURN:VALue <Qstring>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:MAXRTURN:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:MAXWRITe:VALue <Qstring>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:MAXWRITe:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:PACKets {RESPonse|DIRect}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:PACKets?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:SADDress:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:SADDress:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:SDR:BROADCASTPacket {ENSLave|DISLave|ENTasx|RSTDya|ENTRDya|SETMwrl|SETMrdl|LSLave|ENTRTSTMode|EXTime>}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:SDR:BROADCASTPacket?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:SDR:DIRECTPacket {ENSLave|DISLave|ENTasx|RSTDya|SETMwrl|SETMrdl|SEText|SETDya|SETNdya|GETMWrl|GETMRdl|GETPrid|GETBusch|GETDevch|GETSlave|ACCM|SETBrt|MDATASpeed|HDRCapability}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:SDR:DIRECTPacket?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:STATEBYTe:VALue <Qstring>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:STATEBYTe:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:STATic:ADDRess <Qstring>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:STATic:ADDRess?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:SUPPORTBYTe:VALue <Qstring>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:SUPPORTBYTe:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:TESTMODe:VALue <Qstring>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:TESTMODe:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:CONDition {DATA|IDANDDATA|ERRor|IDentifier|SLEEP|SYNCfield|WAKEup}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:CONDition?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa:HIVALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa:HIVALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa:QUALifier {EQual|LESSEQual|MOREEQual|UNEQual|LESSthan|MOREthan|INrange|OUTrange}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa:QUALifier?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa:SIZe <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa:SIZe?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:ERRTYPE {CHecksum|PARity|SYNC}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:ERRTYPE?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:IDentifier:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:IDentifier:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:CONDition {SYNCBITS|HEADer|DATa|packetOffData|TRAiler|ERRors}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:CONDition?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:DATa:SIZe <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:DATa:SIZe?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:DATa:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:DATa:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:ERRor:TYPe {MANChester|PARity}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:ERRor:TYPe?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:HEADER:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:HEADER:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:SYNC:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:SYNC:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:TRAILER:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:TRAILER:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:packetOffData:VALue <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:packetOffData:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:ADDress:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:ADDress:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:CONDition {STARTPACKet|PHYSICALADDRess|REGISTERADDRess|DEVICETYPe|DATA|ADDRess|ERRor}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:CONDition?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:DATa:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:DATa:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:DEVicetype:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:DEVicetype:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:ERRType {OPCODEERRor|DEVERRor|ANY}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:ERRType?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:OPCode:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:OPCode:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:PHYSicaladdress:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:PHYSicaladdress:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:REGisteraddress:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:REGisteraddress:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:ADDRess:HIVALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:ADDRess:HIVALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:ADDRess:QUALifier {EQual|UNEQual|LESSthan|MOREthan|LESSEQual|MOREEQual|INrange|OUTrange}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:ADDRess:QUALifier?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:ADDRess:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:ADDRess:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:COUNt <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:COUNt?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:PARity {ONE|ZERo|NOCARE}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:PARity?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:SUBADdress <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:SUBADdress?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:TRBit {RX|TX|X}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:TRBit?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:CONDition {SYNC|COMMAND|STATus|DATA|ERRor}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:CONDition?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:DATa:PARity {ONE|ZERo|NOCARE}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:DATa:PARity?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:DATa:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:DATa:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:ERRTYPe {PARity|SYNC|DATA}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:ERRTYPe?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:ADDRess:HIVALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:ADDRess:HIVALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:ADDRess:QUALifier {EQual|UNEQual|LESSthan|MOREthan|LESSEQual|MOREEQual|INrange|OUTrange}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:ADDRess:QUALifier?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:ADDRess:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:ADDRess:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:BIT:BCR {ONE|ZERo|NOCARE}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:BIT:BCR?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:BIT:BUSY {ONE|ZERo|NOCARE}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:BIT:BUSY?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:BIT:DBCA {ONE|ZERo|NOCARE}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:BIT:DBCA?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:BIT:INSTR {ONE|ZERo|NOCARE}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:BIT:INSTR?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:BIT:ME {ONE|ZERo|NOCARE}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:BIT:ME?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:BIT:SRQ {ONE|ZERo|NOCARE}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:BIT:SRQ?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:BIT:SUBSF {ONE|ZERo|NOCARE}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:BIT:SUBSF?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:BIT:TF {ONE|ZERo|NOCARE}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:BIT:TF?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:PARity {ONE|ZERo|NOCARE}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:PARity?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:NRZ:DATa:SIZe <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:NRZ:DATa:SIZe?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:NRZ:DATa:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:NRZ:DATa:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:COMMand:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:COMMand:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:CONDition {RESet|PREsence|COMMand|DATa|READROM|MATCHROM|OVERDRIVEMATCh|SKIPROM|OVERDRIVESKIP|SEARCHROM|ALARMSEARch|CRCERRor}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:CONDition?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:DATa:SIZe <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:DATa:SIZe?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:DATa:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:DATa:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:MATCHROM:FAMILYCODe <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:MATCHROM:FAMILYCODe?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:MATCHROM:SERIALNUMBer <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:MATCHROM:SERIALNUMBer?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:OVERDRIVe:FAMILYCODe <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:OVERDRIVe:FAMILYCODe?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:OVERDRIVe:SERIALNUMBer <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:OVERDRIVe:SERIALNUMBer?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:READROM:FAMILYCODe <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:READROM:FAMILYCODe?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:READROM:SERIALNUMBer <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:READROM:SERIALNUMBer?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:SEARCHROM:ROMCODe <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:SEARCHROM:ROMCODe?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PARallel:DATa:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PARallel:DATa:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:RS232C:CONDition {DATa|EOp|PARItyerror|STARt}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:RS232C:CONDition?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:RS232C:DATa:SIZe <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:RS232C:DATa:SIZe?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:RS232C:DATa:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:RS232C:DATa:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:DISParity {POSITIVe|NEGAtive|EITHer}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:DISParity?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:ERRor {SYMBol|DISParity}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:ERRor?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:SYMbol:CSYMVALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:SYMbol:CSYMVALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:SYMbol:EBITVALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:SYMbol:EBITVALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:SYMbol:MODe {EBIT|TBIT|SYMB}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:SYMbol:MODe?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:SYMbol:TBITRDNeg <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:SYMbol:TBITRDNeg?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:SYMbol:TBITRDPos <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:SYMbol:TBITRDPos?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:SYMbol:TBITVALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:SYMbol:TBITVALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:SYMbol:TYPe {DATa|CONTrol}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:SYMbol:TYPe?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:ADDRess:TYPe {BROadcast|NOSTATion|STATIONADDr}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:ADDRess:TYPe?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:CONDition {STARt|DATa|ABORt|ADDRess|UNNumbered|INFormation|SUPervisory|ERRors|END}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:CONDition?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:DATa:SIZe <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:DATa:SIZe?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:DATa:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:DATa:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:ERROR:TYPe {FCS|NUMERICORDer}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:ERROR:TYPe?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:FRAMe:TYPe {COMMand|RESPonse|BOTH}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:FRAMe:TYPe?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:STADDress:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:STADDress:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:SUPervisory:FRAMETYPe {RR|RNR|REJ}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:SUPervisory:FRAMETYPe?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:UNNumbered:FRAMETYPe {UP|UI|SNRM|SNRME|REQDISConnect|UACK|REQSETINIT|DISCMODe|FRAMEREJ|TEST|XID|CONFigure|BEACon}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:UNNumbered:FRAMETYPe?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:CONDition {START|FAST|SLOW|PAUSE|ERRor}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:CONDition?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:ERRType {FRAMELENgth|CRC}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:ERRType:CRC {FAST|SLOW}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:ERRType:CRC?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:ERRType?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN1A:HIVALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN1A:HIVALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN1A:QUALifier {EQual|UNEQual|LESSthan|MOREthan|LESSEQual|MOREEQual|INrange|OUTrange}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN1A:QUALifier?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN1A:VALue <Qstring>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN1A:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN2B:HIVALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN2B:HIVALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN2B:QUALifier {EQual|UNEQual|LESSthan|MOREthan|LESSEQual|MOREEQual|INrange|OUTrange}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN2B:QUALifier?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN2B:VALue <Qstring>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN2B:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:COUNTer:HIVALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:COUNTer:HIVALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:COUNTer:QUALifier {EQual|UNEQual|LESSthan|MOREthan|LESSEQual|MOREEQual|INrange|OUTrange}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:COUNTer:QUALifier?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:COUNTer:VALue <Qstring>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:COUNTer:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:INVERTNIBble:VALue <Qstring>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:INVERTNIBble:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:STATus:VALue <Qstring>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:STATus:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:PAUSE:QUALifier {EQual|UNEQual|LESSthan|MOREthan|LESSEQual|MOREEQual|INrange|OUTrange}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:PAUSE:QUALifier?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:PAUSE:TICKs:HIVALue
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:PAUSE:TICKs:HIVALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:PAUSE:TICKs:VALue <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:PAUSE:TICKs:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:SLOW:DATA:HIVALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:SLOW:DATA:HIVALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:SLOW:DATA:QUALifier {EQual|UNEQual|LESSthan|MOREthan|LESSEQual|MOREEQualINrange|OUTrange}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:SLOW:DATA:QUALifier?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:SLOW:DATA:VALue <Qstring>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:SLOW:DATA:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:SLOW:IDentifier:VALue <Qstring>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:SLOW:IDentifier:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:ADDRess:VALue <Qstring>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:ADDRess:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:COMMand:VALue <Qstring>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:COMMand:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:CONDition {STARt|REPEATSTARt|ADDRess|HOSTADDR|DEVICEADDR|COMMand|DATa|UDIDDATa|ERRor|STOP|IDLe}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:CONDition?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:DATa:SIZe <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:DATa:SIZe?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:DATa:VALue <Qstring>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:DATa:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:DEVICEADDR:VALue <Qstring>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:DEVICEADDR:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:ERROr:TYPe {ANY|ACK|NACK|PEC}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:ERROr:TYPe?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:FIELDBYTe {ONE|TWO|FOUR}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:FIELDBYTe?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:UDIDDATa:VALue {ONE|TWO|FOUR}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:UDIDDATa:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SOUrce {B0|B1|B2|B3|B4|B5|B6|B7|B8|B9|B10|B11|B12|B13|B14|B15|B16}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SOUrce?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SPACEWIRe:CONDition {SYNC|DATa|ERRors|CONTROLCODe|CONTROLCHAR}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SPACEWIRe:CONDition?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SPACEWIRe:CONTROLCHARTYPe {FCT|ESC|ENDOFPACKet}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SPACEWIRe:CONTROLCHARTYPe?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SPACEWIRe:CONTROLCODETYPe {NULL|TIMECODe}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SPACEWIRe:CONTROLCODETYPe?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SPACEWIRe:DATa:SIZe <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SPACEWIRe:DATa:SIZe?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SPACEWIRe:DATa:VALue <Qstring>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SPACEWIRe:DATa:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SPACEWIRe:ERRORTYPe {EEP|ESC|PARity}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SPACEWIRe:ERRORTYPe?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SPACEWIRe:TIMECode:VALue <Qstring>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SPACEWIRe:TIMECode:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:CONDition {DATA|SS|STARTofframe}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:CONDition?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:DATa:SIZe <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:DATa:SIZe?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:DATa:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:DATa:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:SOURCETYpe {MISo|MOSi}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:SOURCETYpe?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:CONDition {SSC|RESet|SLEep|SHUTdown|WAKeup|MASTERREAd|MASTERWRIte|REGREAd|REGWRIte|DEVICEDESCMASTERREAd|DEVICEDESCSLAVEREAd|EXTREGREAd|EXTREGWRIte|LONGEXTREGREAd|LONGEXTREGWRIte|REG0WRIte|AUTHenticate|TRANSferbusownership|PARItyerror}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:CONDition?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:DATa:SIZe <NR2>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:DATa:SIZe?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:DATa:VALue <Qstring>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:DATa:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:MASTERADDRess:VALue <Qstring>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:MASTERADDRess:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:NORESPonse <Qstring>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:NORESPonse?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:REGISTERADDRess:VALue <Qstring>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:REGISTERADDRess:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:SLAVEADDRess:VALue <Qstring>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:SLAVEADDRess:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:COMMand:RESPonse {GETReg|GETRegvendor|GETRegtestcfg|SETFast|SETSlow|SETDecay|SETPs|SETRegaddr|SETRegdata|REGAddrvendor|REGDatavendor|REGAddrtestconfg|REGDatatestconfg|TESTmode|SETWp|GETRegpktrecent|GETRegpktalert|GETRegpktbad|GETRegvrevent}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:COMMand:RESPonse?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:COMMand:TYPe {GET|SET|OPTional}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:COMMand:TYPe?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:CONDition {STARTCONDition|SLAVEADDRess|COMMand|PAYLoad|ERRors}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:CONDition?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:ERRor:TYPe {ANY|NACK|REJect|MIXed|PARity}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:ERRor:TYPe?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:PAYLoad:TYPe {MASTer|SLAVe|EITHer}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:PAYLoad:TYPe?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:PAYLoad:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:PAYLoad:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:SLAVE:ADDRESS <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:SLAVE:ADDRESS?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ADDress:HIVALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ADDress:HIVALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ADDress:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ADDress:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:CONDition {DATAPacket|EOP|ERRor|HANDSHAKEPacket|RESET|RESUME|SPECIALPacket|SUSPEND|SYNC|TOKENPacket}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:CONDition?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:HIVALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:HIVALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:OFFSet <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:OFFSet?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:QUALifier {EQual|UNEQual|LESSthan|MOREthan|LESSEQual|MOREEQual|INrange|OUTrange}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:SIZe <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:SIZe?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:TYPe {ANY|DATA<x>|MDATA}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:TYPe?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ENDPoint:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ENDPoint:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ERRTYPE {BITSTUFFing|CRC5|CRC16|PID}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ERRTYPE?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:HANDSHAKEType {ACK|ANY|NAK|NYET|STALL}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:HANDSHAKEType?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SOFFRAMENUMber <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SOFFRAMENUMber?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPECIALType {ANY|ERROr|PING|PREamble|RESERVed|SPLit}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPECIALType?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:ET:VALue {BULK|CONTROL|NOCARE|INTERRUPT|ISOchronous}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:ET:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:HUB:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:HUB:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:PORT:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:PORT:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:SC:VALue {CSPLIT|NOCARE|SSPLIT}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:SC:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:SE:VALue {NOCARE|FULLSPEED|ISOALL|ISOEND|ISOMID|ISOSTART|LOWSPEED}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:SE:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:TOKENType {ANY|IN|OUT|SETUP|SOF}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:TOKENType?
- SEARCH:SEARCH<x>:TRIGger:A:DDRREAD:BURSTDETectmethod {DQDQS|ChipSelect|LogicState}
- SEARCH:SEARCH<x>:TRIGger:A:DDRREAD:BURSTDETectmethod?
- SEARCH:SEARCH<x>:TRIGger:A:DDRREAD:BURSTLENGTH <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:DDRREAD:BURSTLENGTH?
- SEARCH:SEARCH<x>:TRIGger:A:DDRREAD:BURSTLatency <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:DDRREAD:BURSTLatency?
- SEARCH:SEARCH<x>:TRIGger:A:DDRREAD:CSActive {LOW|HIGH}
- SEARCH:SEARCH<x>:TRIGger:A:DDRREAD:CSActive?
- SEARCH:SEARCH<x>:TRIGger:A:DDRREAD:CSLevel <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:DDRREAD:CSLevel?
- SEARCH:SEARCH<x>:TRIGger:A:DDRREAD:CSMode {Auto|Manual}
- SEARCH:SEARCH<x>:TRIGger:A:DDRREAD:CSMode?
- SEARCH:SEARCH<x>:TRIGger:A:DDRREAD:CSSource {S<x>_Ch<x>_D<x>|CH<x>|CH<x>_D<x>|Math<x>|REF<x>|REF<x>_D<x>}
- SEARCH:SEARCH<x>:TRIGger:A:DDRREAD:CSSource?
- SEARCH:SEARCH<x>:TRIGger:A:DDRREAD:DATARate {333|800|1066|1200|1333|1466|1600|1866|2133}
- SEARCH:SEARCH<x>:TRIGger:A:DDRREAD:DATARate?
- SEARCH:SEARCH<x>:TRIGger:A:DDRREAD:DATASource {CH<x>|CH<x>_D<x<|Math<x>|REF<x>|REF<x>_D<x>}
- SEARCH:SEARCH<x>:TRIGger:A:DDRREAD:DATASource?
- SEARCH:SEARCH<x>:TRIGger:A:DDRREAD:HYSteresis <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:DDRREAD:HYSteresis?
- SEARCH:SEARCH<x>:TRIGger:A:DDRREAD:LOGIC1SOUrce:SYMBol {H|L|X}
- SEARCH:SEARCH<x>:TRIGger:A:DDRREAD:LOGIC1SOUrce:SYMBol?
- SEARCH:SEARCH<x>:TRIGger:A:DDRREAD:LOGIC2SOUrce:SYMBol {H|L|X}
- SEARCH:SEARCH<x>:TRIGger:A:DDRREAD:LOGIC2SOUrce:SYMBol?
- SEARCH:SEARCH<x>:TRIGger:A:DDRREAD:LOGIC3SOUrce:SYMBol {H|L|X}
- SEARCH:SEARCH<x>:TRIGger:A:DDRREAD:LOGIC3SOUrce:SYMBol?
- SEARCH:SEARCH<x>:TRIGger:A:DDRREAD:LOGIC4SOUrce:SYMBol {H|L|X}
- SEARCH:SEARCH<x>:TRIGger:A:DDRREAD:LOGIC4SOUrce:SYMBol?
- SEARCH:SEARCH<x>:TRIGger:A:DDRREAD:MARgin <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:DDRREAD:MARgin?
- SEARCH:SEARCH<x>:TRIGger:A:DDRREAD:MAXCAS <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:DDRREAD:MAXCAS?
- SEARCH:SEARCH<x>:TRIGger:A:DDRREAD:MINCas <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:DDRREAD:MINCas?
- SEARCH:SEARCH<x>:TRIGger:A:DDRREAD:POSTAMBLE:LENGth {500E-3|500E-1.5|500E-1}
- SEARCH:SEARCH<x>:TRIGger:A:DDRREAD:POSTAMBLE:LENGth?
- SEARCH:SEARCH<x>:TRIGger:A:DDRREAD:PREAMBLE:TYPE {STATIC|DYNAMIC}
- SEARCH:SEARCH<x>:TRIGger:A:DDRREAD:PREAMBLE:TYPE?
- SEARCH:SEARCH<x>:TRIGger:A:DDRREAD:REFLEVELMode {AUTO|MANUAL}
- SEARCH:SEARCH<x>:TRIGger:A:DDRREAD:REFLEVELMode?
- SEARCH:SEARCH<x>:TRIGger:A:DDRREAD:REFLevel:DATA:HIGH <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:DDRREAD:REFLevel:DATA:HIGH?
- SEARCH:SEARCH<x>:TRIGger:A:DDRREAD:REFLevel:DATA:LOW <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:DDRREAD:REFLevel:DATA:LOW?
- SEARCH:SEARCH<x>:TRIGger:A:DDRREAD:REFLevel:DATA:MID <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:DDRREAD:REFLevel:DATA:MID?
- SEARCH:SEARCH<x>:TRIGger:A:DDRREAD:REFLevel:STROBE:HIGH <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:DDRREAD:REFLevel:STROBE:HIGH?
- SEARCH:SEARCH<x>:TRIGger:A:DDRREAD:REFLevel:STROBE:LOW <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:DDRREAD:REFLevel:STROBE:LOW?
- SEARCH:SEARCH<x>:TRIGger:A:DDRREAD:REFLevel:STROBE:MID <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:DDRREAD:REFLevel:STROBE:MID?
- SEARCH:SEARCH<x>:TRIGger:A:DDRREAD:STANdard {DDR3|LPDDR3}
- SEARCH:SEARCH<x>:TRIGger:A:DDRREAD:STANdard?
- SEARCH:SEARCH<x>:TRIGger:A:DDRREAD:STROBESource {CH<x>|CH<x>_D<x<|Math<x>|REF<x>|REF<x>_D<x>}
- SEARCH:SEARCH<x>:TRIGger:A:DDRREAD:STROBESource?
- SEARCH:SEARCH<x>:TRIGger:A:DDRREAD:TOLERance <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:DDRREAD:TOLERance?
- SEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:BURSTDETectmethod {DQDQS|ChipSelect|LogicState}
- SEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:BURSTDETectmethod?
- SEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:BURSTLENGTH <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:BURSTLENGTH?
- SEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:BURSTLatency <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:BURSTLatency?
- SEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:CSActive {LOW|HIGH}
- SEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:CSActive?
- SEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:CSLevel <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:CSLevel?
- SEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:CSMode {Auto|Manual}
- SEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:CSMode?
- SEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:CSSource {S<x>_Ch<x>_D<x>|CH<x>|CH<x>_D<x>|Math<x>|REF<x>|REF<x>_D<x>}
- SEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:CSSource?
- SEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:DATARate {333|800|1066|1200|1333|1466|1600|1866|2133}
- SEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:DATARate?
- SEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:DATASource {CH<x>|CH<x>_D<x<|Math<x>|REF<x>|REF<x>_D<x>}
- SEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:DATASource?
- SEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:HYSteresis <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:HYSteresis?
- SEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:LOGIC1SOUrce:SYMBol {H|L|X}
- SEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:LOGIC1SOUrce:SYMBol?
- SEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:LOGIC2SOUrce:SYMBol {H|L|X}
- SEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:LOGIC2SOUrce:SYMBol?
- SEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:LOGIC3SOUrce:SYMBol {H|L|X}
- SEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:LOGIC3SOUrce:SYMBol?
- SEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:LOGIC4SOUrce:SYMBol {H|L|X}
- SEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:LOGIC4SOUrce:SYMBol?
- SEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:MARgin <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:MARgin?
- SEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:MAXCAS <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:MAXCAS?
- SEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:MINCas <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:MINCas?
- SEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:POSTAMBLE:LENGth {500E-3|1.5|1}
- SEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:POSTAMBLE:LENGth?
- SEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:PREAMBLE:TYPE {STATIC|DYNAMIC}
- SEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:PREAMBLE:TYPE?
- SEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:REFLEVELMode {AUTO|MANUAL}
- SEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:REFLEVELMode?
- SEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:REFLevel:DATA:HIGH <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:REFLevel:DATA:HIGH?
- SEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:REFLevel:DATA:LOW <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:REFLevel:DATA:LOW?
- SEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:REFLevel:DATA:MID <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:REFLevel:DATA:MID?
- SEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:REFLevel:STROBE:HIGH <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:REFLevel:STROBE:HIGH?
- SEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:REFLevel:STROBE:LOW <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:REFLevel:STROBE:LOW?
- SEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:REFLevel:STROBE:MID <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:REFLevel:STROBE:MID?
- SEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:STANdard {DDR3|LPDDR3}
- SEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:STANdard?
- SEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:STROBESource {CH<x>|CH<x>_D<x<|Math<x>|REF<x>|REF<x>_D<x>}
- SEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:STROBESource?
- SEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:TOLERance <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:TOLERance?
- SEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:BURSTDETectmethod {DQDQS|ChipSelect|LogicState}
- SEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:BURSTDETectmethod?
- SEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:BURSTLENGTH <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:BURSTLENGTH?
- SEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:BURSTLatency <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:BURSTLatency?
- SEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:CSActive {LOW|HIGH}
- SEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:CSActive?
- SEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:CSLevel <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:CSLevel?
- SEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:CSMode {Auto|Manual}
- SEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:CSMode?
- SEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:CSSource {S<x>_Ch<x>_D<x>|CH<x>|CH<x>_D<x>|Math<x>|REF<x>|REF<x>_D<x>}
- SEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:CSSource?
- SEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:DATARate {333|800|1066|1200|1333|1466|1600|1866|2133}
- SEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:DATARate?
- SEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:DATASource {CH<x>|CH<x>_D<x<|Math<x>|REF<x>|REF<x>_D<x>}
- SEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:DATASource?
- SEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:HYSteresis <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:HYSteresis?
- SEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:LOGIC1SOUrce:SYMBol {H|L|X}
- SEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:LOGIC1SOUrce:SYMBol?
- SEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:LOGIC2SOUrce:SYMBol {H|L|X}
- SEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:LOGIC2SOUrce:SYMBol?
- SEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:LOGIC3SOUrce:SYMBol {H|L|X}
- SEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:LOGIC3SOUrce:SYMBol?
- SEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:LOGIC4SOUrce:SYMBol {H|L|X}
- SEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:LOGIC4SOUrce:SYMBol?
- SEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:MARgin <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:MARgin?
- SEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:MAXCAS <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:MAXCAS?
- SEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:MINCas <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:MINCas?
- SEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:POSTAMBLE:LENGth {500E-3|1.5|1}
- SEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:POSTAMBLE:LENGth?
- SEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:PREAMBLE:TYPE {STATIC|DYNAMIC}
- SEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:PREAMBLE:TYPE?
- SEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:REFLEVELMode {AUTO|MANUAL}
- SEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:REFLEVELMode?
- SEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:REFLevel:DATA:HIGH <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:REFLevel:DATA:HIGH?
- SEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:REFLevel:DATA:LOW <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:REFLevel:DATA:LOW?
- SEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:REFLevel:DATA:MID <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:REFLevel:DATA:MID?
- SEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:REFLevel:STROBE:HIGH <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:REFLevel:STROBE:HIGH?
- SEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:REFLevel:STROBE:LOW <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:REFLevel:STROBE:LOW?
- SEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:REFLevel:STROBE:MID <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:REFLevel:STROBE:MID?
- SEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:STANdard {DDR3|LPDDR3}
- SEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:STANdard?
- SEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:STROBESource {CH<x>|CH<x>_D<x<|Math<x>|REF<x>|REF<x>_D<x>}
- SEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:STROBESource?
- SEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:TOLERance <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:TOLERance?
- SEARCH:SEARCH<x>:TRIGger:A:EDGE:SLOpe {RISe|FALL|EITher}
- SEARCH:SEARCH<x>:TRIGger:A:EDGE:SLOpe?
- SEARCH:SEARCH<x>:TRIGger:A:EDGE:SOUrce {S<x>_Ch<x>_D<x>|CH<x>|CH<x>_D<x>|MATH<x>|REF<x>|REF<x>_D<x>}
- SEARCH:SEARCH<x>:TRIGger:A:EDGE:SOUrce?
- SEARCH:SEARCH<x>:TRIGger:A:EDGE:THReshold <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:EDGE:THReshold?
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:CLOCk:THReshold <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:CLOCk:THReshold?
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:DELTatime <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:DELTatime?
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:FUNCtion {AND|NANd|NOR|OR}
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:FUNCtion?
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:INPUT:CLOCK:SOUrce {S<x>_Ch<x>_D|CH<x>|CH<x>_D<x>|REF<x>_D<x>}
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:INPUT:CLOCK:SOUrce?
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LEVel:CH<x> <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LEVel:CH<x>?
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LEVel:MATH<x> <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LEVel:MATH<x>?
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LEVel:REF<x> <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LEVel:REF<x>?
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LOGICPattern:CH<x> {H|L|X}
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LOGICPattern:CH<x>?
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LOGICPattern:CH<x>_D<x> {H|L|X}
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LOGICPattern:CH<x>_D<x>?
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LOGICPattern:MATH<x> {H|L|X}
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LOGICPattern:MATH<x>?
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LOGICPattern:REF<x> {H|L|X}
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LOGICPattern:REF<x>?
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:POLarity {POSitive|NEGative|EITher}
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:POLarity?
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:USEClockedge {ON|OFF|1|0}
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:USEClockedge?
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:WHEn {TRUe|FALSe|MOREThan|LESSThan|EQual|UNEQual}
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:WHEn?
- SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:HIGHLimit <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:HIGHLimit?
- SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:LOGICQUALification {ON|OFF}
- SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:LOGICQUALification?
- SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:LOWLimit <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:LOWLimit?
- SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:POLarity {POSitive|NEGative}
- SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:POLarity?
- SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:SOUrce {S<x>_Ch<x>_D|CH<x>|CH<x>_D<x>|REF<x>|REF<x>_D<x>}
- SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:SOUrce?
- SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:THReshold <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:THReshold?
- SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:WHEn {LESSthan|MOREthan|EQual|UNEQual|WIThin|OUTside}
- SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:WHEn?
- SEARCH:SEARCH<x>:TRIGger:A:RUNT:LOGICQUALification {ON|OFF}
- SEARCH:SEARCH<x>:TRIGger:A:RUNT:LOGICQUALification?
- SEARCH:SEARCH<x>:TRIGger:A:RUNT:POLarity {POSitive|NEGative|EITher}
- SEARCH:SEARCH<x>:TRIGger:A:RUNT:POLarity?
- SEARCH:SEARCH<x>:TRIGger:A:RUNT:SOUrce {CH<x>|REF<x>}
- SEARCH:SEARCH<x>:TRIGger:A:RUNT:THReshold:HIGH <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:RUNT:THReshold:HIGH?
- SEARCH:SEARCH<x>:TRIGger:A:RUNT:THReshold:LOW <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:RUNT:THReshold:LOW?
- SEARCH:SEARCH<x>:TRIGger:A:RUNT:WHEn {OCCURS|LESSthan|MOREthan|EQual}NOTEQual}
- SEARCH:SEARCH<x>:TRIGger:A:RUNT:WHEn?
- SEARCH:SEARCH<x>:TRIGger:A:RUNT:WIDth <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:RUNT:WIDth?
- SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:EDGE {FALL|RISe}
- SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:EDGE?
- SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:SOUrce {S<x>_Ch<x>_D<x>|CH<x>|CH<x>_D<x>|MATH<x>|REF<x>|REF<x>_D<x>}
- SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:SOUrce?
- SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:THReshold <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:THReshold?
- SEARCH:SEARCH<x>:TRIGger:A:SETHold:HOLDTime <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:SETHold:HOLDTime?
- SEARCH:SEARCH<x>:TRIGger:A:SETHold:LEVel:CH<x> <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:SETHold:LEVel:CH<x>?
- SEARCH:SEARCH<x>:TRIGger:A:SETHold:LEVel:MATH<x> <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:SETHold:LEVel:MATH<x>?
- SEARCH:SEARCH<x>:TRIGger:A:SETHold:LEVel:REF<x> <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:SETHold:LEVel:REF<x>?
- SEARCH:SEARCH<x>:TRIGger:A:SETHold:LOGICPattern:CH<x> {INCLude|DONTInclude}
- SEARCH:SEARCH<x>:TRIGger:A:SETHold:LOGICPattern:CH<x>?
- SEARCH:SEARCH<x>:TRIGger:A:SETHold:LOGICPattern:CH<x>_D<x> {INCLude|DONTInclude}
- SEARCH:SEARCH<x>:TRIGger:A:SETHold:LOGICPattern:CH<x>_D<x>?
- SEARCH:SEARCH<x>:TRIGger:A:SETHold:LOGICPattern:MATH<x> {INCLude|DONTInclude}
- SEARCH:SEARCH<x>:TRIGger:A:SETHold:LOGICPattern:MATH<x>?
- SEARCH:SEARCH<x>:TRIGger:A:SETHold:LOGICPattern:REF<x> {INCLude|DONTInclude}
- SEARCH:SEARCH<x>:TRIGger:A:SETHold:LOGICPattern:REF<x>?
- SEARCH:SEARCH<x>:TRIGger:A:SETHold:SETTime <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:SETHold:SETTime?
- SEARCH:SEARCH<x>:TRIGger:A:STATE {ON|OFF|<NR1>}
- SEARCH:SEARCH<x>:TRIGger:A:STOPAcq {ON|OFF|<NR1>}
- SEARCH:SEARCH<x>:TRIGger:A:STOPAcq?
- SEARCH:SEARCH<x>:TRIGger:A:TIMEOut:LOGICQUALification {ON|OFF}
- SEARCH:SEARCH<x>:TRIGger:A:TIMEOut:LOGICQUALification?
- SEARCH:SEARCH<x>:TRIGger:A:TIMEOut:POLarity {STAYSHigh|STAYSLow|EITher}
- SEARCH:SEARCH<x>:TRIGger:A:TIMEOut:POLarity?
- SEARCH:SEARCH<x>:TRIGger:A:TIMEOut:SOUrce {S<x>_Ch<x>_D<x>|CH<x>|CH<x>_D<x>|MATH<x>|REF<x>|REF<x>_D<x>}
- SEARCH:SEARCH<x>:TRIGger:A:TIMEOut:SOUrce?
- SEARCH:SEARCH<x>:TRIGger:A:TIMEOut:THReshold <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:TIMEOut:THReshold?
- SEARCH:SEARCH<x>:TRIGger:A:TIMEOut:TIMe <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:TIMEOut:TIMe?
- SEARCH:SEARCH<x>:TRIGger:A:TRANsition:DELTATime <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:TRANsition:DELTATime?
- SEARCH:SEARCH<x>:TRIGger:A:TRANsition:LOGICQUALification {ON|OFF}
- SEARCH:SEARCH<x>:TRIGger:A:TRANsition:LOGICQUALification?
- SEARCH:SEARCH<x>:TRIGger:A:TRANsition:POLarity {POSitive|NEGative|EITher}
- SEARCH:SEARCH<x>:TRIGger:A:TRANsition:POLarity?
- SEARCH:SEARCH<x>:TRIGger:A:TRANsition:SOUrce {S<x>_Ch<x>|CH<x>|MATH<x>|REF<x>}
- SEARCH:SEARCH<x>:TRIGger:A:TRANsition:SOUrce?
- SEARCH:SEARCH<x>:TRIGger:A:TRANsition:THReshold:HIGH <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:TRANsition:THReshold:HIGH?
- SEARCH:SEARCH<x>:TRIGger:A:TRANsition:THReshold:LOW <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:TRANsition:THReshold:LOW?
- SEARCH:SEARCH<x>:TRIGger:A:TRANsition:WHEn {FASTERthan|SLOWERthan|EQual|UNEQual}
- SEARCH:SEARCH<x>:TRIGger:A:TRANsition:WHEn?
- SEARCH:SEARCH<x>:TRIGger:A:TYPe {EDGE|RUNT|TRANsition|PULSEWidth|TIMEOut|LOGIc|SETHold|WINdow|Bus|DDRRead|DDRREADWrite|DDRWrite}
- SEARCH:SEARCH<x>:TRIGger:A:TYPe?
- SEARCH:SEARCH<x>:TRIGger:A:WINdow:CROSSIng {UPPer|LOWer|EITher|NONe}
- SEARCH:SEARCH<x>:TRIGger:A:WINdow:LOGICQUALification {ON|OFF}
- SEARCH:SEARCH<x>:TRIGger:A:WINdow:LOGICQUALification?
- SEARCH:SEARCH<x>:TRIGger:A:WINdow:POLarity {UPPer|LOWer|EITher|NONe}
- SEARCH:SEARCH<x>:TRIGger:A:WINdow:POLarity?
- SEARCH:SEARCH<x>:TRIGger:A:WINdow:SOUrce {S<x>_Ch<x>|CH<x>|MATH<x>|REF<x>}
- SEARCH:SEARCH<x>:TRIGger:A:WINdow:SOUrce?
- SEARCH:SEARCH<x>:TRIGger:A:WINdow:THReshold:HIGH <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:WINdow:THReshold:HIGH?
- SEARCH:SEARCH<x>:TRIGger:A:WINdow:THReshold:LOW <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:WINdow:THReshold:LOW?
- SEARCH:SEARCH<x>:TRIGger:A:WINdow:WHEn {ENTERSWindow|EXITSWindow|INSIDEGreater|OUTSIDEGreater}
- SEARCH:SEARCH<x>:TRIGger:A:WINdow:WHEn?
- SEARCH:SEARCH<x>:TRIGger:A:WINdow:WIDth <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:WINdow:WIDth?
- SEARCH:SELected SEARCH1
- SEARCH:SELected?
Search
¶
Bases: SCPICmdRead
The SEARCH command tree.
Usage
- Using the
.query()method will send theSEARCH?query. - Using the
.verify(value)method will send theSEARCH?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.addnew: TheSEARCH:ADDNewcommand..deleteall: TheSEARCH:DELETEALLcommand..delete: TheSEARCH:DELetecommand..list: TheSEARCH:LISTcommand..search: TheSEARCH:SEARCH<x>command tree..selected: TheSEARCH:SELectedcommand.
addnew
property
¶
addnew: SearchAddnew
Return the SEARCH:ADDNew command.
Description
- This command adds the specified search.
Usage
- Using the
.write(value)method will send theSEARCH:ADDNew valuecommand.
SCPI Syntax
- SEARCH:ADDNew <QString>
Info
<QString>is the specified search. The argument is of the form ‘SEARCH‘, where is ≥ 1.
delete
property
¶
delete: SearchDelete
Return the SEARCH:DELete command.
Description
- This command deletes the specified search.
Usage
- Using the
.write(value)method will send theSEARCH:DELete valuecommand.
SCPI Syntax
- SEARCH:DELete <QString>
Info
<QString>is the specified search. The argument is of the form ‘SEARCH‘, where is ≥ 1).
deleteall
property
¶
deleteall: SearchDeleteall
Return the SEARCH:DELETEALL command.
Description
- This command deletes all the active instances of search definitions defined in the scope application.
Usage
- Using the
.write()method will send theSEARCH:DELETEALLcommand.
SCPI Syntax
- SEARCH:DELETEALL
list
property
¶
list: SearchList
Return the SEARCH:LIST command.
Description
- This command returns a comma separated list of all currently defined searches.
Usage
- Using the
.query()method will send theSEARCH:LIST?query. - Using the
.verify(value)method will send theSEARCH:LIST?query and raise an AssertionError if the returned value does not matchvalue.
SCPI Syntax
- SEARCH:LIST?
search
property
¶
search: dict[int, SearchSearchItem]
Return the SEARCH:SEARCH<x> command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.copy: TheSEARCH:SEARCH<x>:COPycommand..navigate: TheSEARCH:SEARCH<x>:NAVigatecommand..total: TheSEARCH:SEARCH<x>:TOTALcommand..trigger: TheSEARCH:SEARCH<x>:TRIGgercommand tree.
selected
property
¶
selected: SearchSelected
Return the SEARCH:SELected command.
Description
- This command sets or queries the selected search, for example SEARCH1. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SELected?query. - Using the
.verify(value)method will send theSEARCH:SELected?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SELected valuecommand.
SCPI Syntax
- SEARCH:SELected SEARCH1
- SEARCH:SELected?
Info
SEARCH1is the specified search.
SearchAddnew
¶
Bases: SCPICmdWrite
The SEARCH:ADDNew command.
Description
- This command adds the specified search.
Usage
- Using the
.write(value)method will send theSEARCH:ADDNew valuecommand.
SCPI Syntax
- SEARCH:ADDNew <QString>
Info
<QString>is the specified search. The argument is of the form ‘SEARCH‘, where is ≥ 1.
SearchDelete
¶
Bases: SCPICmdWrite
The SEARCH:DELete command.
Description
- This command deletes the specified search.
Usage
- Using the
.write(value)method will send theSEARCH:DELete valuecommand.
SCPI Syntax
- SEARCH:DELete <QString>
Info
<QString>is the specified search. The argument is of the form ‘SEARCH‘, where is ≥ 1).
SearchDeleteall
¶
Bases: SCPICmdWriteNoArguments
The SEARCH:DELETEALL command.
Description
- This command deletes all the active instances of search definitions defined in the scope application.
Usage
- Using the
.write()method will send theSEARCH:DELETEALLcommand.
SCPI Syntax
- SEARCH:DELETEALL
SearchList
¶
Bases: SCPICmdRead
The SEARCH:LIST command.
Description
- This command returns a comma separated list of all currently defined searches.
Usage
- Using the
.query()method will send theSEARCH:LIST?query. - Using the
.verify(value)method will send theSEARCH:LIST?query and raise an AssertionError if the returned value does not matchvalue.
SCPI Syntax
- SEARCH:LIST?
SearchSearchItem
¶
Bases: ValidatedDynamicNumberCmd, SCPICmdRead
The SEARCH:SEARCH<x> command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.copy: TheSEARCH:SEARCH<x>:COPycommand..navigate: TheSEARCH:SEARCH<x>:NAVigatecommand..total: TheSEARCH:SEARCH<x>:TOTALcommand..trigger: TheSEARCH:SEARCH<x>:TRIGgercommand tree.
copy
property
¶
copy: SearchSearchItemCopy
Return the SEARCH:SEARCH<x>:COPy command.
Description
- This command (no query form) copies the search criteria to or from the trigger. The search number is specified by x.
Usage
- Using the
.write(value)method will send theSEARCH:SEARCH<x>:COPy valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:COPy {SEARCHtotrigger|TRIGgertosearch}
Info
SEARCHtotriggercopies the search criteria to the trigger.TRIGgertosearchcopies the trigger criteria to the search.
navigate
property
¶
navigate: SearchSearchItemNavigate
Return the SEARCH:SEARCH<x>:NAVigate command.
Description
- This command sets the navigation action for search marks. The NONE action is the default setting when no action is being taken. The search number is specified by x.
Usage
- Using the
.write(value)method will send theSEARCH:SEARCH<x>:NAVigate valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:NAVigate {NEXT|PREVious|MIN|NONE|MAX}
Info
NEXTgoes to the next search mark.PREViousgoes to the previous search mark.MINgoes to the search result with the smallest value. Only supported by search results which have quantitative values (example: pulse width is supported, but not edge).NONEis the default setting when no action is being taken.MAXgoes to the search result with the largest value. Only supported by search results which have quantitative values (example: pulse width is supported, but not edge).
total
property
¶
total: SearchSearchItemTotal
Return the SEARCH:SEARCH<x>:TOTAL command.
Description
- This query-only command returns the total number of found search marks for this search. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TOTAL?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TOTAL?query and raise an AssertionError if the returned value does not matchvalue.
SCPI Syntax
- SEARCH:SEARCH<x>:TOTAL?
trigger
property
¶
trigger: SearchSearchItemTrigger
Return the SEARCH:SEARCH<x>:TRIGger command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.a: TheSEARCH:SEARCH<x>:TRIGger:Acommand tree.
SearchSearchItemCopy
¶
Bases: SCPICmdWrite
The SEARCH:SEARCH<x>:COPy command.
Description
- This command (no query form) copies the search criteria to or from the trigger. The search number is specified by x.
Usage
- Using the
.write(value)method will send theSEARCH:SEARCH<x>:COPy valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:COPy {SEARCHtotrigger|TRIGgertosearch}
Info
SEARCHtotriggercopies the search criteria to the trigger.TRIGgertosearchcopies the trigger criteria to the search.
SearchSearchItemNavigate
¶
Bases: SCPICmdWrite
The SEARCH:SEARCH<x>:NAVigate command.
Description
- This command sets the navigation action for search marks. The NONE action is the default setting when no action is being taken. The search number is specified by x.
Usage
- Using the
.write(value)method will send theSEARCH:SEARCH<x>:NAVigate valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:NAVigate {NEXT|PREVious|MIN|NONE|MAX}
Info
NEXTgoes to the next search mark.PREViousgoes to the previous search mark.MINgoes to the search result with the smallest value. Only supported by search results which have quantitative values (example: pulse width is supported, but not edge).NONEis the default setting when no action is being taken.MAXgoes to the search result with the largest value. Only supported by search results which have quantitative values (example: pulse width is supported, but not edge).
SearchSearchItemTotal
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TOTAL command.
Description
- This query-only command returns the total number of found search marks for this search. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TOTAL?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TOTAL?query and raise an AssertionError if the returned value does not matchvalue.
SCPI Syntax
- SEARCH:SEARCH<x>:TOTAL?
SearchSearchItemTrigger
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.a: TheSEARCH:SEARCH<x>:TRIGger:Acommand tree.
a
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.bus: TheSEARCH:SEARCH<x>:TRIGger:A:BUScommand tree..ddrread: TheSEARCH:SEARCH<x>:TRIGger:A:DDRREADcommand tree..ddrreadwrite: TheSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITEcommand tree..ddrwrite: TheSEARCH:SEARCH<x>:TRIGger:A:DDRWRITEcommand tree..edge: TheSEARCH:SEARCH<x>:TRIGger:A:EDGEcommand tree..logic: TheSEARCH:SEARCH<x>:TRIGger:A:LOGIccommand tree..pulsewidth: TheSEARCH:SEARCH<x>:TRIGger:A:PULSEWidthcommand tree..runt: TheSEARCH:SEARCH<x>:TRIGger:A:RUNTcommand tree..sethold: TheSEARCH:SEARCH<x>:TRIGger:A:SETHoldcommand tree..state: TheSEARCH:SEARCH<x>:TRIGger:A:STATEcommand..stopacq: TheSEARCH:SEARCH<x>:TRIGger:A:STOPAcqcommand..timeout: TheSEARCH:SEARCH<x>:TRIGger:A:TIMEOutcommand tree..transition: TheSEARCH:SEARCH<x>:TRIGger:A:TRANsitioncommand tree..type: TheSEARCH:SEARCH<x>:TRIGger:A:TYPecommand..window: TheSEARCH:SEARCH<x>:TRIGger:A:WINdowcommand tree.
SearchSearchItemTriggerA
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.bus: TheSEARCH:SEARCH<x>:TRIGger:A:BUScommand tree..ddrread: TheSEARCH:SEARCH<x>:TRIGger:A:DDRREADcommand tree..ddrreadwrite: TheSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITEcommand tree..ddrwrite: TheSEARCH:SEARCH<x>:TRIGger:A:DDRWRITEcommand tree..edge: TheSEARCH:SEARCH<x>:TRIGger:A:EDGEcommand tree..logic: TheSEARCH:SEARCH<x>:TRIGger:A:LOGIccommand tree..pulsewidth: TheSEARCH:SEARCH<x>:TRIGger:A:PULSEWidthcommand tree..runt: TheSEARCH:SEARCH<x>:TRIGger:A:RUNTcommand tree..sethold: TheSEARCH:SEARCH<x>:TRIGger:A:SETHoldcommand tree..state: TheSEARCH:SEARCH<x>:TRIGger:A:STATEcommand..stopacq: TheSEARCH:SEARCH<x>:TRIGger:A:STOPAcqcommand..timeout: TheSEARCH:SEARCH<x>:TRIGger:A:TIMEOutcommand tree..transition: TheSEARCH:SEARCH<x>:TRIGger:A:TRANsitioncommand tree..type: TheSEARCH:SEARCH<x>:TRIGger:A:TYPecommand..window: TheSEARCH:SEARCH<x>:TRIGger:A:WINdowcommand tree.
bus
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.arinc429a: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429Acommand tree..audio: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:AUDiocommand tree..autoethernet: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnetcommand tree..b: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:Bcommand tree..can: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:CANcommand tree..cphy: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:CPHYcommand tree..cxpi: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:CXPIcommand tree..dphy: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:DPHYcommand tree..espi: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ESPIcommand tree..ethercat: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCATcommand tree..ethernet: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnetcommand tree..eusb: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSBcommand tree..flexray: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAYcommand tree..i2c: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:I2Ccommand tree..i3c: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:I3Ccommand tree..lin: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:LINcommand tree..manchester: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:MANChestercommand tree..mdio: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:MDIOcommand tree..mil1553b: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553Bcommand tree..nrz: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:NRZcommand tree..onewire: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRecommand tree..parallel: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:PARallelcommand tree..rs232c: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:RS232Ccommand tree..s8b10b: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10Bcommand tree..sdlc: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:SDLCcommand tree..sent: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:SENTcommand tree..smbus: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUScommand tree..source: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:SOUrcecommand..spacewire: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:SPACEWIRecommand tree..spi: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:SPIcommand tree..spmi: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:SPMIcommand tree..svid: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:SVIDcommand tree..usb: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:USBcommand tree.
ddrread
property
¶
ddrread: SearchSearchItemTriggerADdrread
Return the SEARCH:SEARCH<x>:TRIGger:A:DDRREAD command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREAD?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREAD?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.burstdetectmethod: TheSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:BURSTDETectmethodcommand..burstlength: TheSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:BURSTLENGTHcommand..burstlatency: TheSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:BURSTLatencycommand..csactive: TheSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:CSActivecommand..cslevel: TheSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:CSLevelcommand..csmode: TheSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:CSModecommand..cssource: TheSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:CSSourcecommand..datarate: TheSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:DATARatecommand..datasource: TheSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:DATASourcecommand..hysteresis: TheSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:HYSteresiscommand..logic1source: TheSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:LOGIC1SOUrcecommand tree..logic2source: TheSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:LOGIC2SOUrcecommand tree..logic3source: TheSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:LOGIC3SOUrcecommand tree..logic4source: TheSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:LOGIC4SOUrcecommand tree..margin: TheSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:MARgincommand..maxcas: TheSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:MAXCAScommand..mincas: TheSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:MINCascommand..postamble: TheSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:POSTAMBLEcommand tree..preamble: TheSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:PREAMBLEcommand tree..reflevelmode: TheSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:REFLEVELModecommand..reflevel: TheSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:REFLevelcommand tree..standard: TheSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:STANdardcommand..strobesource: TheSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:STROBESourcecommand..tolerance: TheSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:TOLERancecommand.
ddrreadwrite
property
¶
ddrreadwrite: SearchSearchItemTriggerADdrreadwrite
Return the SEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.burstdetectmethod: TheSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:BURSTDETectmethodcommand..burstlength: TheSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:BURSTLENGTHcommand..burstlatency: TheSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:BURSTLatencycommand..csactive: TheSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:CSActivecommand..cslevel: TheSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:CSLevelcommand..csmode: TheSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:CSModecommand..cssource: TheSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:CSSourcecommand..datarate: TheSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:DATARatecommand..datasource: TheSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:DATASourcecommand..hysteresis: TheSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:HYSteresiscommand..logic1source: TheSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:LOGIC1SOUrcecommand tree..logic2source: TheSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:LOGIC2SOUrcecommand tree..logic3source: TheSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:LOGIC3SOUrcecommand tree..logic4source: TheSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:LOGIC4SOUrcecommand tree..margin: TheSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:MARgincommand..maxcas: TheSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:MAXCAScommand..mincas: TheSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:MINCascommand..postamble: TheSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:POSTAMBLEcommand tree..preamble: TheSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:PREAMBLEcommand tree..reflevelmode: TheSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:REFLEVELModecommand..reflevel: TheSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:REFLevelcommand tree..standard: TheSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:STANdardcommand..strobesource: TheSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:STROBESourcecommand..tolerance: TheSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:TOLERancecommand.
ddrwrite
property
¶
ddrwrite: SearchSearchItemTriggerADdrwrite
Return the SEARCH:SEARCH<x>:TRIGger:A:DDRWRITE command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.burstdetectmethod: TheSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:BURSTDETectmethodcommand..burstlength: TheSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:BURSTLENGTHcommand..burstlatency: TheSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:BURSTLatencycommand..csactive: TheSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:CSActivecommand..cslevel: TheSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:CSLevelcommand..csmode: TheSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:CSModecommand..cssource: TheSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:CSSourcecommand..datarate: TheSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:DATARatecommand..datasource: TheSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:DATASourcecommand..hysteresis: TheSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:HYSteresiscommand..logic1source: TheSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:LOGIC1SOUrcecommand tree..logic2source: TheSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:LOGIC2SOUrcecommand tree..logic3source: TheSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:LOGIC3SOUrcecommand tree..logic4source: TheSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:LOGIC4SOUrcecommand tree..margin: TheSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:MARgincommand..maxcas: TheSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:MAXCAScommand..mincas: TheSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:MINCascommand..postamble: TheSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:POSTAMBLEcommand tree..preamble: TheSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:PREAMBLEcommand tree..reflevelmode: TheSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:REFLEVELModecommand..reflevel: TheSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:REFLevelcommand tree..standard: TheSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:STANdardcommand..strobesource: TheSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:STROBESourcecommand..tolerance: TheSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:TOLERancecommand.
edge
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:EDGE command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:EDGE?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:EDGE?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.slope: TheSEARCH:SEARCH<x>:TRIGger:A:EDGE:SLOpecommand..source: TheSEARCH:SEARCH<x>:TRIGger:A:EDGE:SOUrcecommand..threshold: TheSEARCH:SEARCH<x>:TRIGger:A:EDGE:THResholdcommand.
logic
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:LOGIc command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:LOGIc?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:LOGIc?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.clock: TheSEARCH:SEARCH<x>:TRIGger:A:LOGIc:CLOCkcommand tree..deltatime: TheSEARCH:SEARCH<x>:TRIGger:A:LOGIc:DELTatimecommand..function: TheSEARCH:SEARCH<x>:TRIGger:A:LOGIc:FUNCtioncommand..input: TheSEARCH:SEARCH<x>:TRIGger:A:LOGIc:INPUTcommand tree..level: TheSEARCH:SEARCH<x>:TRIGger:A:LOGIc:LEVelcommand tree..logicpattern: TheSEARCH:SEARCH<x>:TRIGger:A:LOGIc:LOGICPatterncommand tree..polarity: TheSEARCH:SEARCH<x>:TRIGger:A:LOGIc:POLaritycommand..useclockedge: TheSEARCH:SEARCH<x>:TRIGger:A:LOGIc:USEClockedgecommand..when: TheSEARCH:SEARCH<x>:TRIGger:A:LOGIc:WHEncommand.
pulsewidth
property
¶
pulsewidth: SearchSearchItemTriggerAPulsewidth
Return the SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:PULSEWidth?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:PULSEWidth?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.highlimit: TheSEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:HIGHLimitcommand..logicqualification: TheSEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:LOGICQUALificationcommand..lowlimit: TheSEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:LOWLimitcommand..polarity: TheSEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:POLaritycommand..source: TheSEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:SOUrcecommand..threshold: TheSEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:THResholdcommand..when: TheSEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:WHEncommand.
runt
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:RUNT command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:RUNT?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:RUNT?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.logicqualification: TheSEARCH:SEARCH<x>:TRIGger:A:RUNT:LOGICQUALificationcommand..polarity: TheSEARCH:SEARCH<x>:TRIGger:A:RUNT:POLaritycommand..source: TheSEARCH:SEARCH<x>:TRIGger:A:RUNT:SOUrcecommand..threshold: TheSEARCH:SEARCH<x>:TRIGger:A:RUNT:THResholdcommand tree..when: TheSEARCH:SEARCH<x>:TRIGger:A:RUNT:WHEncommand..width: TheSEARCH:SEARCH<x>:TRIGger:A:RUNT:WIDthcommand.
sethold
property
¶
sethold: SearchSearchItemTriggerASethold
Return the SEARCH:SEARCH<x>:TRIGger:A:SETHold command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:SETHold?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:SETHold?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.clock: TheSEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCkcommand tree..holdtime: TheSEARCH:SEARCH<x>:TRIGger:A:SETHold:HOLDTimecommand..level: TheSEARCH:SEARCH<x>:TRIGger:A:SETHold:LEVelcommand tree..logicpattern: TheSEARCH:SEARCH<x>:TRIGger:A:SETHold:LOGICPatterncommand tree..settime: TheSEARCH:SEARCH<x>:TRIGger:A:SETHold:SETTimecommand.
state
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:STATE command.
Description
- This command sets or queries the enabled state of the search. The search number is specified by x.
Usage
- Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:STATE valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:STATE {ON|OFF|<NR1>}
Info
<NR1>= 1 enables the search. Any other character disables the search.ONenables the search.OFFdisables the search.
stopacq
property
¶
stopacq: SearchSearchItemTriggerAStopacq
Return the SEARCH:SEARCH<x>:TRIGger:A:STOPAcq command.
Description
- This command sets or queries whether acquisitions are stopped when a search hit is found. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:STOPAcq?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:STOPAcq?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:STOPAcq valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:STOPAcq {ON|OFF|<NR1>}
- SEARCH:SEARCH<x>:TRIGger:A:STOPAcq?
Info
<x>is the number of the search on which to enable or disable the stop acquisition function.<NR1>= 1 enables stopping when a search hit is found. Any other character disables the feature.ONenables stopping when a search hit is found.OFFdisables stopping on a search hit.
timeout
property
¶
timeout: SearchSearchItemTriggerATimeout
Return the SEARCH:SEARCH<x>:TRIGger:A:TIMEOut command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:TIMEOut?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:TIMEOut?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.logicqualification: TheSEARCH:SEARCH<x>:TRIGger:A:TIMEOut:LOGICQUALificationcommand..polarity: TheSEARCH:SEARCH<x>:TRIGger:A:TIMEOut:POLaritycommand..source: TheSEARCH:SEARCH<x>:TRIGger:A:TIMEOut:SOUrcecommand..threshold: TheSEARCH:SEARCH<x>:TRIGger:A:TIMEOut:THResholdcommand..time: TheSEARCH:SEARCH<x>:TRIGger:A:TIMEOut:TIMecommand.
transition
property
¶
transition: SearchSearchItemTriggerATransition
Return the SEARCH:SEARCH<x>:TRIGger:A:TRANsition command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:TRANsition?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:TRANsition?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.deltatime: TheSEARCH:SEARCH<x>:TRIGger:A:TRANsition:DELTATimecommand..logicqualification: TheSEARCH:SEARCH<x>:TRIGger:A:TRANsition:LOGICQUALificationcommand..polarity: TheSEARCH:SEARCH<x>:TRIGger:A:TRANsition:POLaritycommand..source: TheSEARCH:SEARCH<x>:TRIGger:A:TRANsition:SOUrcecommand..threshold: TheSEARCH:SEARCH<x>:TRIGger:A:TRANsition:THResholdcommand tree..when: TheSEARCH:SEARCH<x>:TRIGger:A:TRANsition:WHEncommand.
type
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:TYPe command.
Description
- This command sets or queries the trigger type setting for a search to determine where to place a mark. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:TYPe?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:TYPe?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:TYPe valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:TYPe {EDGE|RUNT|TRANsition|PULSEWidth|TIMEOut|LOGIc|SETHold|WINdow|Bus|DDRRead|DDRREADWrite|DDRWrite}
- SEARCH:SEARCH<x>:TRIGger:A:TYPe?
Info
EDGEtriggers when the source input signal amplitude crosses the specified level in the direction given by the slope.RUNTtriggers when a pulse crosses the first preset voltage threshold but does not cross the second preset threshold before recrossing the first. The thresholds are set with theSEARCH:SEARCH<x>:TRIGger:A:RUNt:HIGHandSEARCH:SEARCH<x>:TRIGger:A:RUNt:LOW THRESHOLDcommands.TRANsitiontriggers when a pulse crosses both thresholds in the same direction as the specified polarity and the transition time between the two threshold crossings is greater or less than the specified time delta.PULSEWidthtriggers on input signal source pulses that are inside or outside of the given time range specified bySEARCH:SEARCH<x>:TRIGger:A:LOGIc:PATtern:WHEn:LESSLimitandSEARCH:SEARCH<x>:TRIGger:A:LOGIc:PATtern:WHEn:MORELimit. The polarity is selected using theSEARCH:SEARCH<x>:TRIGger:A:RUNT: POLarity command.TIMEOuttriggers on an input signal source that stays above, stays below, or stays either above or beow the trigger level for a given time.LOGIcspecifies that a search occurs when specified conditions are met, and is controlled by theSEARCH:A:LOGIccommands.SETHoldtriggers on a functional pattern combination of one to three data sources at the time of the clock transition.WINdowtriggers on an input signal source that enters or exits the horizontal band defined by the two trigger levels.Busspecifies that a search occurs when a communications signal is found.DDRReadtriggers on a DDR Read event.DDRREADWritetriggers on a DDR Read or Write event.DDRWritetriggers on a DDR Write event.
window
property
¶
window: SearchSearchItemTriggerAWindow
Return the SEARCH:SEARCH<x>:TRIGger:A:WINdow command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:WINdow?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:WINdow?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.crossing: TheSEARCH:SEARCH<x>:TRIGger:A:WINdow:CROSSIngcommand..logicqualification: TheSEARCH:SEARCH<x>:TRIGger:A:WINdow:LOGICQUALificationcommand..polarity: TheSEARCH:SEARCH<x>:TRIGger:A:WINdow:POLaritycommand..source: TheSEARCH:SEARCH<x>:TRIGger:A:WINdow:SOUrcecommand..threshold: TheSEARCH:SEARCH<x>:TRIGger:A:WINdow:THResholdcommand tree..when: TheSEARCH:SEARCH<x>:TRIGger:A:WINdow:WHEncommand..width: TheSEARCH:SEARCH<x>:TRIGger:A:WINdow:WIDthcommand.
SearchSearchItemTriggerABus
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.arinc429a: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429Acommand tree..audio: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:AUDiocommand tree..autoethernet: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnetcommand tree..b: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:Bcommand tree..can: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:CANcommand tree..cphy: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:CPHYcommand tree..cxpi: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:CXPIcommand tree..dphy: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:DPHYcommand tree..espi: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ESPIcommand tree..ethercat: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCATcommand tree..ethernet: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnetcommand tree..eusb: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSBcommand tree..flexray: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAYcommand tree..i2c: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:I2Ccommand tree..i3c: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:I3Ccommand tree..lin: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:LINcommand tree..manchester: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:MANChestercommand tree..mdio: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:MDIOcommand tree..mil1553b: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553Bcommand tree..nrz: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:NRZcommand tree..onewire: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRecommand tree..parallel: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:PARallelcommand tree..rs232c: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:RS232Ccommand tree..s8b10b: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10Bcommand tree..sdlc: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:SDLCcommand tree..sent: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:SENTcommand tree..smbus: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUScommand tree..source: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:SOUrcecommand..spacewire: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:SPACEWIRecommand tree..spi: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:SPIcommand tree..spmi: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:SPMIcommand tree..svid: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:SVIDcommand tree..usb: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:USBcommand tree.
arinc429a
property
¶
arinc429a: SearchSearchItemTriggerABusArinc429a
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.condition: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:CONDitioncommand..data: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:DATacommand tree..errtype: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:ERRTYPecommand..label: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:LABelcommand tree..sdi: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:SDIcommand tree..ssm: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:SSMcommand tree.
audio
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.condition: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:CONDitioncommand..data: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:DATacommand tree.
autoethernet
property
¶
autoethernet: SearchSearchItemTriggerABusAutoethernet
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.condition: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:CONDitioncommand..data: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:DATacommand tree..ipheader: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:IPHeadercommand tree..mac: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:MACcommand tree..qtag: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:QTAGcommand tree..qualifier: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:QUALifiercommand..tcpheader: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:TCPHeadercommand tree.
b
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:B command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:B?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:B?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.nrz: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:B:NRZcommand tree..psifive: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVecommand tree..s8b10b: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:B:S8B10Bcommand tree.
can
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CAN?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CAN?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.condition: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:CONDitioncommand..data: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATacommand tree..errtype: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:ERRTypecommand..fd: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:FDcommand tree..frametype: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:FRAMEtypecommand..identifier: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:IDentifiercommand tree.
cphy
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.blue: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:BLUecommand tree..condition: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:CONDitioncommand..data: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:DATacommand tree..error: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:ERRorcommand tree..escapemode: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:ESCAPEMODecommand tree..green: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:GREencommand tree..mode: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:MODecommand tree..packets: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:PACKetscommand tree..pixel: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:PIXelcommand tree..red: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:REDcommand tree..symbol: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:SYMBolcommand tree..word: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:WORDcommand tree..wordcount: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:WORDCOUNtcommand tree..ycbcr: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:YCBCRcommand tree..yuv: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:YUVcommand tree.
cxpi
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.condition: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:CONDitioncommand..counter: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:COUNtercommand tree..data: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:DATacommand tree..dlc: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:DLCcommand tree..error: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:ERRORcommand tree..extdlc: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:EXTDLCcommand tree..frameid: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:FRAMEIDcommand tree..frame: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:FRAMecommand tree..netmn: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:NETMNcommand tree.
dphy
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.blue: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:BLUecommand tree..condition: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:CONDitioncommand..data: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:DATacommand tree..error: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:ERRorcommand tree..escapemode: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:ESCAPEMODecommand tree..green: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:GREencommand tree..mode: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:MODecommand tree..packets: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:PACKetscommand tree..pixel: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:PIXelcommand tree..red: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:REDcommand tree..wordcount: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:WORDCOUNtcommand tree..ycbcr: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:YCBCRcommand tree..yuv: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:YUVcommand tree.
espi
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.address: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:ADDResscommand tree..command: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:COMMANDcommand tree..condition: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:CONDitioncommand..cycletype: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:CYCLETYPecommand..data: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:DATacommand tree..error: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:ERRorcommand tree..length: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:LENGthcommand tree..phase: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:PHASecommand..respcycle: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:RESPCYCLEcommand tree..smbus: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:SMBUScommand tree..tag: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:TAGcommand tree..virtualwire: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:VIRTUALWIRecommand tree.
ethercat
property
¶
ethercat: SearchSearchItemTriggerABusEthercat
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.addressmode: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:ADDRESSMODecommand..cntnv: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:CNTNVcommand tree..commandtype: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:COMMANDTYPecommand..condition: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:CONDitioncommand..cyc: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:CYCcommand tree..datagram: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:DATAGRAMcommand..datagramheader: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:DATAGRAMHEADercommand..data: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:DATacommand tree..destinationaddress: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:DESTINATIONADDResscommand tree..deviceaddress: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:DEVICEADDResscommand..error: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:ERRorcommand tree..frametype: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:FRAMETYPecommand..hash: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:HASHcommand tree..header: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:HEADercommand tree..identification: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:IDENtificationcommand tree..idx: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:IDXcommand tree..index: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:INDexcommand tree..ipdestination: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:IPDESTinationcommand tree..ipsource: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:IPSOURcecommand tree..irq: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:IRQcommand tree..len: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:LENcommand tree..logicaladdress: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:LOGICALADDResscommand tree..mailboxtype: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:MAILBOXTYPecommand..mailbox: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:MAILboxcommand..networkvariable: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:NETWORKVARiablecommand tree..network: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:NETWorkcommand tree..offset: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:OFFSetcommand tree..position: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:POSitioncommand tree..protocoltype: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:PROTOCOLTYPecommand..pubid: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:PUBIDcommand tree..quality: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:QUALitycommand tree..service: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:SERVicecommand tree..sourceaddress: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:SOURCEADDResscommand tree..src: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:SRCcommand tree..tci: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:TCIcommand tree..wkc: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:WKCcommand tree.
ethernet
property
¶
ethernet: SearchSearchItemTriggerABusEthernet
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.condition: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:CONDitioncommand..data: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:DATacommand tree..ipheader: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:IPHeadercommand tree..mac: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MACcommand tree..qtag: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:QTAGcommand tree..tcpheader: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeadercommand tree.
eusb
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.address: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:ADDresscommand tree..condition: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:CONDitioncommand..databits: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:DATABITScommand tree..data: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:DATacommand tree..endpoint: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:ENDPointcommand tree..endsearch: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:ENDSEARchcommand..eop: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:EOPcommand tree..eopbits: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:EOPBITScommand tree..errtype: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:ERRTypecommand..handshaketype: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:HANDSHAKETypecommand..rap: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:RAPcommand tree..sofframenumber: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SOFFRAMENUMbercommand..specialtype: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPECIALTypecommand..split: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPLitcommand tree..sync: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SYNCcommand tree..syncbits: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SYNCBITScommand tree..syncsearch: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SYNCSEARchcommand..tokentype: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:TOKENTypecommand.
flexray
property
¶
flexray: SearchSearchItemTriggerABusFlexray
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.condition: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:CONDitioncommand..cyclecount: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:CYCLEcountcommand tree..data: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:DATacommand tree..eoftype: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:EOFTYPEcommand..errtype: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:ERRTYPEcommand..frameid: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:FRAMEIDcommand tree..frametype: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:FRAMETypecommand..header: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:HEADERcommand tree.
i2c
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I2C?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I2C?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.address: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:ADDResscommand tree..condition: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:CONDitioncommand..data: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:DATacommand tree.
i3c
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.address: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:ADDResscommand tree..bcr: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:BCRcommand tree..bcrtype: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:BCRTypecommand tree..bpackets: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:BPACKetscommand..brgtid: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:BRGTIDcommand tree..ccode: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:CCODecommand tree..condition: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:CONDitioncommand..data: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:DATacommand tree..dcr: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:DCRcommand tree..dcrtype: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:DCRTypecommand tree..dword: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:DWORdcommand tree..errortype: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:ERRORTYPecommand..eventbyte: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:EVENTBYTecommand tree..freqbyte: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:FREQBYTecommand tree..gslsb: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:GSLSbcommand tree..gsmsb: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:GSMSbcommand tree..id: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:IDcommand tree..inaccbyte: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:INACCBYTecommand tree..maxread: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:MAXREADcommand tree..maxrturn: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:MAXRTURNcommand tree..maxwrite: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:MAXWRITecommand tree..packets: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:PACKetscommand..saddress: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:SADDresscommand tree..sdr: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:SDRcommand tree..statebyte: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:STATEBYTecommand tree..static: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:STATiccommand tree..supportbyte: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:SUPPORTBYTecommand tree..testmode: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:TESTMODecommand tree.
lin
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:LIN?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:LIN?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.condition: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:CONDitioncommand..data: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATacommand tree..errtype: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:ERRTYPEcommand..identifier: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:IDentifiercommand tree.
manchester
property
¶
manchester: SearchSearchItemTriggerABusManchester
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.condition: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:CONDitioncommand..data: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:DATacommand tree..error: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:ERRorcommand tree..header: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:HEADERcommand tree..sync: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:SYNCcommand tree..trailer: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:TRAILERcommand tree..packetoffdata: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:packetOffDatacommand tree.
mdio
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.address: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:ADDresscommand tree..condition: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:CONDitioncommand..data: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:DATacommand tree..devicetype: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:DEVicetypecommand tree..errtype: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:ERRTypecommand..opcode: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:OPCodecommand tree..physicaladdress: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:PHYSicaladdresscommand tree..registeraddress: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:REGisteraddresscommand tree.
mil1553b
property
¶
mil1553b: SearchSearchItemTriggerABusMil1553b
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.command: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMANDcommand tree..condition: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:CONDitioncommand..data: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:DATacommand tree..errtype: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:ERRTYPecommand..status: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATuscommand tree.
nrz
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:NRZ command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:NRZ?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:NRZ?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.data: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:NRZ:DATacommand tree.
onewire
property
¶
onewire: SearchSearchItemTriggerABusOnewire
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.command: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:COMMandcommand tree..condition: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:CONDitioncommand..data: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:DATacommand tree..matchrom: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:MATCHROMcommand tree..overdrive: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:OVERDRIVecommand tree..readrom: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:READROMcommand tree..searchrom: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:SEARCHROMcommand tree.
parallel
property
¶
parallel: SearchSearchItemTriggerABusParallel
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:PARallel command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:PARallel?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:PARallel?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.data: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:PARallel:DATacommand tree.
rs232c
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:RS232C command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:RS232C?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:RS232C?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.condition: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:RS232C:CONDitioncommand..data: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:RS232C:DATacommand tree.
s8b10b
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.disparity: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:DISParitycommand..error: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:ERRorcommand..symbol: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:SYMbolcommand tree.
sdlc
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.address: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:ADDResscommand tree..condition: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:CONDitioncommand..data: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:DATacommand tree..error: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:ERRORcommand tree..frame: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:FRAMecommand tree..staddress: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:STADDresscommand tree..supervisory: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:SUPervisorycommand tree..unnumbered: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:UNNumberedcommand tree.
sent
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SENT?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SENT?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.condition: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:CONDitioncommand..errtype: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:ERRTypecommand..fast: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FASTcommand tree..pause: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:PAUSEcommand tree..slow: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:SLOWcommand tree.
smbus
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.address: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:ADDResscommand tree..command: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:COMMandcommand tree..condition: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:CONDitioncommand..data: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:DATacommand tree..deviceaddr: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:DEVICEADDRcommand tree..error: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:ERROrcommand tree..fieldbyte: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:FIELDBYTecommand..udiddata: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:UDIDDATacommand tree.
source
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:SOUrce command.
Description
- This command sets or queries the bus source for the bus search to determine where to place a mark. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SOUrce?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SOUrce?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SOUrce valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SOUrce {B0|B1|B2|B3|B4|B5|B6|B7|B8|B9|B10|B11|B12|B13|B14|B15|B16}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SOUrce?
Info
B<x>specifies the bus source as a bus number from B01 to B16. x has a minimum of 0 and a maximum of 16.
spacewire
property
¶
spacewire: SearchSearchItemTriggerABusSpacewire
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:SPACEWIRe command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SPACEWIRe?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SPACEWIRe?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.condition: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:SPACEWIRe:CONDitioncommand..controlchartype: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:SPACEWIRe:CONTROLCHARTYPecommand..controlcodetype: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:SPACEWIRe:CONTROLCODETYPecommand..data: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:SPACEWIRe:DATacommand tree..errortype: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:SPACEWIRe:ERRORTYPecommand..timecode: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:SPACEWIRe:TIMECodecommand tree.
spi
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:SPI command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SPI?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SPI?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.condition: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:CONDitioncommand..data: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:DATacommand tree..sourcetype: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:SOURCETYpecommand.
spmi
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.condition: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:CONDitioncommand..data: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:DATacommand tree..masteraddress: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:MASTERADDResscommand tree..noresponse: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:NORESPonsecommand..registeraddress: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:REGISTERADDResscommand tree..slaveaddress: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:SLAVEADDResscommand tree.
svid
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:SVID command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SVID?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SVID?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.command: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:COMMandcommand tree..condition: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:CONDitioncommand..error: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:ERRorcommand tree..payload: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:PAYLoadcommand tree..slave: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:SLAVEcommand tree.
usb
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:USB?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:USB?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.address: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ADDresscommand tree..condition: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:USB:CONDitioncommand..data: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATacommand tree..endpoint: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ENDPointcommand tree..errtype: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ERRTYPEcommand..handshaketype: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:USB:HANDSHAKETypecommand..sofframenumber: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SOFFRAMENUMbercommand..specialtype: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPECIALTypecommand..split: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLITcommand tree..tokentype: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:USB:TOKENTypecommand.
SearchSearchItemTriggerABusArinc429a
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.condition: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:CONDitioncommand..data: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:DATacommand tree..errtype: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:ERRTYPecommand..label: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:LABelcommand tree..sdi: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:SDIcommand tree..ssm: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:SSMcommand tree.
condition
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:CONDition command.
Description
- This command specifies a field or condition for an ARINC429 bus to search on. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:CONDition?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:CONDition?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:CONDition valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:CONDition {SOW|LABel|DATa|LABELANDDATA|EOW|ERRor}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:CONDition?
Info
SOWspecifies a search for the first bit of a word.LABelspecifies a search for a matching label.DATaspecifies a search for matching packet data fields.LABELANDDATAspecifies a search for a matching label and matching packet data field(s).EOWspecifies a search for the 32nd bit of a word.ERRorspecifies a search for a specified error condition.
data
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:DATa command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:DATa?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:DATa?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.hivalue: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:DATa:HIVALuecommand..qualifier: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:DATa:QUALifiercommand..value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:DATa:VALuecommand.
errtype
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:ERRTYPe command.
Description
- This command sets or queries the error type when searching on an ARINC429 bus signal. The search number is specified by x. The search condition must be set to ERRor.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:ERRTYPe?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:ERRTYPe?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:ERRTYPe valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:ERRTYPe {ANY|PARity|WORD|GAP}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:ERRTYPe?
Info
ANYsets the error type to match any of the other available error types.PARitysets the error type to match on parity errors (parity value results in even parity count for a word).WORDsets the error type to match on word errors (any unframed or unknown decode data).GAPsets the error type to match on gap violations (less than 4 bits idle time between two packets on the bus).
label
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:LABel command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:LABel?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:LABel?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.hivalue: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:LABel:HIVALuecommand..qualifier: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:LABel:QUALifiercommand..value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:LABel:VALuecommand.
sdi
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:SDI command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:SDI?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:SDI?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:SDI:VALuecommand.
ssm
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:SSM command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:SSM?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:SSM?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:SSM:VALuecommand.
SearchSearchItemTriggerABusArinc429aCondition
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:CONDition command.
Description
- This command specifies a field or condition for an ARINC429 bus to search on. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:CONDition?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:CONDition?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:CONDition valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:CONDition {SOW|LABel|DATa|LABELANDDATA|EOW|ERRor}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:CONDition?
Info
SOWspecifies a search for the first bit of a word.LABelspecifies a search for a matching label.DATaspecifies a search for matching packet data fields.LABELANDDATAspecifies a search for a matching label and matching packet data field(s).EOWspecifies a search for the 32nd bit of a word.ERRorspecifies a search for a specified error condition.
SearchSearchItemTriggerABusArinc429aData
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:DATa command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:DATa?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:DATa?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.hivalue: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:DATa:HIVALuecommand..qualifier: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:DATa:QUALifiercommand..value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:DATa:VALuecommand.
hivalue
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:DATa:HIVALue command.
Description
- This command sets or queries the high value when searching on an ARINC429 data field. The search number is specified by x. The search condition must be set to DATa or LABELANDDATA, and the data qualifier must be INrange or OUTrange.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:DATa:HIVALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:DATa:HIVALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:DATa:HIVALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:DATa:HIVALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:DATa:HIVALue?
Info
<QString>is the label value.
qualifier
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:DATa:QUALifier command.
Description
- This command sets or queries the qualifier to be used when searching on data in the DATA field for an ARINC429 bus signal. The search number is specified by x. The search condition must be set to DATa or LABELANDDATA.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:DATa:QUALifier?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:DATa:QUALifier?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:DATa:QUALifier valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:DATa:QUALifier {EQual|UNEQual|LESSthan|MOREthan|LESSEQual|MOREEQual|INrange|OUTrange}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:DATa:QUALifier?
Info
EQualsets the data qualifier to equal.UNEQualsets the data qualifier to unequal.LESSthansets the data qualifier to less than.MOREthansets the data qualifier to more than.LESSEQualsets the data qualifier to less equal.MOREEQualsets the data qualifier to more equal.INrangesets the data qualifier to in range.OUTrangesets the data qualifier to out of range.
value
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:DATa:VALue command.
Description
- This command sets or queries the low value when searching on an ARINC429 data field. The search number is specified by x. The search condition must be set to DATa or LABELANDDATA.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:DATa:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:DATa:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:DATa:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:DATa:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:DATa:VALue?
Info
<QString>is the label value.
SearchSearchItemTriggerABusArinc429aDataHivalue
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:DATa:HIVALue command.
Description
- This command sets or queries the high value when searching on an ARINC429 data field. The search number is specified by x. The search condition must be set to DATa or LABELANDDATA, and the data qualifier must be INrange or OUTrange.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:DATa:HIVALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:DATa:HIVALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:DATa:HIVALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:DATa:HIVALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:DATa:HIVALue?
Info
<QString>is the label value.
SearchSearchItemTriggerABusArinc429aDataQualifier
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:DATa:QUALifier command.
Description
- This command sets or queries the qualifier to be used when searching on data in the DATA field for an ARINC429 bus signal. The search number is specified by x. The search condition must be set to DATa or LABELANDDATA.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:DATa:QUALifier?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:DATa:QUALifier?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:DATa:QUALifier valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:DATa:QUALifier {EQual|UNEQual|LESSthan|MOREthan|LESSEQual|MOREEQual|INrange|OUTrange}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:DATa:QUALifier?
Info
EQualsets the data qualifier to equal.UNEQualsets the data qualifier to unequal.LESSthansets the data qualifier to less than.MOREthansets the data qualifier to more than.LESSEQualsets the data qualifier to less equal.MOREEQualsets the data qualifier to more equal.INrangesets the data qualifier to in range.OUTrangesets the data qualifier to out of range.
SearchSearchItemTriggerABusArinc429aDataValue
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:DATa:VALue command.
Description
- This command sets or queries the low value when searching on an ARINC429 data field. The search number is specified by x. The search condition must be set to DATa or LABELANDDATA.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:DATa:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:DATa:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:DATa:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:DATa:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:DATa:VALue?
Info
<QString>is the label value.
SearchSearchItemTriggerABusArinc429aErrtype
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:ERRTYPe command.
Description
- This command sets or queries the error type when searching on an ARINC429 bus signal. The search number is specified by x. The search condition must be set to ERRor.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:ERRTYPe?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:ERRTYPe?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:ERRTYPe valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:ERRTYPe {ANY|PARity|WORD|GAP}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:ERRTYPe?
Info
ANYsets the error type to match any of the other available error types.PARitysets the error type to match on parity errors (parity value results in even parity count for a word).WORDsets the error type to match on word errors (any unframed or unknown decode data).GAPsets the error type to match on gap violations (less than 4 bits idle time between two packets on the bus).
SearchSearchItemTriggerABusArinc429aLabel
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:LABel command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:LABel?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:LABel?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.hivalue: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:LABel:HIVALuecommand..qualifier: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:LABel:QUALifiercommand..value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:LABel:VALuecommand.
hivalue
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:LABel:HIVALue command.
Description
- This command sets or queries the high value when searching on an ARINC429 label field. The search number is specified by x. The search condition must be set to LABel, and the label qualifier must be INrange or OUTrange.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:LABel:HIVALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:LABel:HIVALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:LABel:HIVALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:LABel:HIVALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:LABel:HIVALue?
Info
<QString>is the label value.
qualifier
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:LABel:QUALifier command.
Description
- This command sets or queries the qualifier to be used when searching on label data for an ARINC429 bus signal. The search number is specified by x. The search condition must be set to LABel or LABELANDDATA.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:LABel:QUALifier?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:LABel:QUALifier?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:LABel:QUALifier valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:LABel:QUALifier {EQual|UNEQual|LESSthan|MOREthan|LESSEQual|MOREEQual|INrange|OUTrange}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:LABel:QUALifier?
Info
EQualsets the data qualifier to equal.UNEQualsets the data qualifier to unequal.LESSthansets the data qualifier to less than.MOREthansets the data qualifier to more than.LESSEQualsets the data qualifier to less equal.MOREEQualsets the data qualifier to more equal.INrangesets the data qualifier to in range.OUTrangesets the data qualifier to out of range.
value
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:LABel:VALue command.
Description
- This command sets or queries the low value when searching on an ARINC429 label field. The search number is specified by x. The search condition must be set to LABel or LABELANDDATA.
Usage
- Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:LABel:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:LABel:VALue <QString>
Info
<QString>is the label value.
SearchSearchItemTriggerABusArinc429aLabelHivalue
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:LABel:HIVALue command.
Description
- This command sets or queries the high value when searching on an ARINC429 label field. The search number is specified by x. The search condition must be set to LABel, and the label qualifier must be INrange or OUTrange.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:LABel:HIVALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:LABel:HIVALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:LABel:HIVALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:LABel:HIVALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:LABel:HIVALue?
Info
<QString>is the label value.
SearchSearchItemTriggerABusArinc429aLabelQualifier
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:LABel:QUALifier command.
Description
- This command sets or queries the qualifier to be used when searching on label data for an ARINC429 bus signal. The search number is specified by x. The search condition must be set to LABel or LABELANDDATA.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:LABel:QUALifier?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:LABel:QUALifier?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:LABel:QUALifier valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:LABel:QUALifier {EQual|UNEQual|LESSthan|MOREthan|LESSEQual|MOREEQual|INrange|OUTrange}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:LABel:QUALifier?
Info
EQualsets the data qualifier to equal.UNEQualsets the data qualifier to unequal.LESSthansets the data qualifier to less than.MOREthansets the data qualifier to more than.LESSEQualsets the data qualifier to less equal.MOREEQualsets the data qualifier to more equal.INrangesets the data qualifier to in range.OUTrangesets the data qualifier to out of range.
SearchSearchItemTriggerABusArinc429aLabelValue
¶
Bases: SCPICmdWrite
The SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:LABel:VALue command.
Description
- This command sets or queries the low value when searching on an ARINC429 label field. The search number is specified by x. The search condition must be set to LABel or LABELANDDATA.
Usage
- Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:LABel:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:LABel:VALue <QString>
Info
<QString>is the label value.
SearchSearchItemTriggerABusArinc429aSdi
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:SDI command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:SDI?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:SDI?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:SDI:VALuecommand.
value
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:SDI:VALue command.
Description
- This command sets or queries the label when searching on an ARINC429 SDI field. The search number is specified by x. The search condition must be set to DATa or LABELANDDATA, and the data format must be set to DATA.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:SDI:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:SDI:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:SDI:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:SDI:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:SDI:VALue?
Info
<QString>is the label value.
SearchSearchItemTriggerABusArinc429aSdiValue
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:SDI:VALue command.
Description
- This command sets or queries the label when searching on an ARINC429 SDI field. The search number is specified by x. The search condition must be set to DATa or LABELANDDATA, and the data format must be set to DATA.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:SDI:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:SDI:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:SDI:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:SDI:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:SDI:VALue?
Info
<QString>is the label value.
SearchSearchItemTriggerABusArinc429aSsm
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:SSM command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:SSM?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:SSM?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:SSM:VALuecommand.
value
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:SSM:VALue command.
Description
- This command sets or queries the label when searching on an ARINC429 SSM field. The search number is specified by x. The search condition must be set to DATa or LABELANDDATA, and the data format must be set to DATA or SDIDATA.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:SSM:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:SSM:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:SSM:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:SSM:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:SSM:VALue?
Info
<QString>is the label value.
SearchSearchItemTriggerABusArinc429aSsmValue
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:SSM:VALue command.
Description
- This command sets or queries the label when searching on an ARINC429 SSM field. The search number is specified by x. The search condition must be set to DATa or LABELANDDATA, and the data format must be set to DATA or SDIDATA.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:SSM:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:SSM:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:SSM:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:SSM:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ARINC429A:SSM:VALue?
Info
<QString>is the label value.
SearchSearchItemTriggerABusAudio
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.condition: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:CONDitioncommand..data: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:DATacommand tree.
condition
property
¶
condition: SearchSearchItemTriggerABusAudioCondition
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:CONDition command.
Description
- This command sets or queries the condition (word select / frame sync, or matching data) to be used when searching on an audio bus signal. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:CONDition?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:CONDition?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:CONDition valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:CONDition {SOF|DATa}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:CONDition?
Info
SOFspecifies to search on a word select or start of frame (depending on Audio Type).DATAspecifies to search on matching data.
data
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:DATa command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:DATa?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:DATa?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.hitdmvalue: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:DATa:HITDMVALuecommand..hivalue: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:DATa:HIVALuecommand..offset: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:DATa:OFFSetcommand..qualifier: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:DATa:QUALifiercommand..tdmvalue: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:DATa:TDMVALuecommand..value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:DATa:VALuecommand..word: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:DATa:WORDcommand.
SearchSearchItemTriggerABusAudioCondition
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:CONDition command.
Description
- This command sets or queries the condition (word select / frame sync, or matching data) to be used when searching on an audio bus signal. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:CONDition?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:CONDition?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:CONDition valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:CONDition {SOF|DATa}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:CONDition?
Info
SOFspecifies to search on a word select or start of frame (depending on Audio Type).DATAspecifies to search on matching data.
SearchSearchItemTriggerABusAudioData
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:DATa command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:DATa?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:DATa?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.hitdmvalue: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:DATa:HITDMVALuecommand..hivalue: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:DATa:HIVALuecommand..offset: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:DATa:OFFSetcommand..qualifier: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:DATa:QUALifiercommand..tdmvalue: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:DATa:TDMVALuecommand..value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:DATa:VALuecommand..word: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:DATa:WORDcommand.
hitdmvalue
property
¶
hitdmvalue: SearchSearchItemTriggerABusAudioDataHitdmvalue
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:DATa:HITDMVALue command.
Description
- This command sets or queries the binary data string for the high data word to be used
when searching on an TDM audio bus signal. The search condition must be set to DATa
using
SEARCH:SEARCH:TRIGger:A:BUS:AUDio:CONDition.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:DATa:HITDMVALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:DATa:HITDMVALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:DATa:HITDMVALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:DATa:HITDMVALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:DATa:HITDMVALue?
Info
<QString>is the binary data string for the high data word to be used when searching on an TDM audio bus signal.
hivalue
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:DATa:HIVALue command.
Description
- This command sets or queries the binary data string for the high data word to be used
when searching on an audio bus signal. The search condition must be set to DATa using
:SEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:CONDition. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:DATa:HIVALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:DATa:HIVALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:DATa:HIVALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:DATa:HIVALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:DATa:HIVALue?
Info
<QString>specifies the upper word value.
offset
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:DATa:OFFSet command.
Description
- This command sets or queries the data offset value (TDM channel) to be used when
searching on a TDM type audio bus signal. The search condition must be set to DATa
using
SEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:TDM:CONDition. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:DATa:OFFSet?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:DATa:OFFSet?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:DATa:OFFSet valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:DATa:OFFSet <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:DATa:OFFSet?
Info
<NR1>is the data offset value.
qualifier
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:DATa:QUALifier command.
Description
- This command sets or queries the qualifier to be used when searching on an audio bus
signal. The search condition must be set to DATa using
SEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:{NONTdm|TDM}:CONDition. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:DATa:QUALifier?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:DATa:QUALifier?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:DATa:QUALifier valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:DATa:QUALifier {EQual|UNEQual|LESSthan|MOREthan|LESSEQual|MOREEQual|INrange|OUTrange}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:DATa:QUALifier?
Info
LESSthansets the qualifier to less than.MOREthansets the qualifier to greater than.EQualsets the qualifier to equal.UNEQualsets the qualifier to not equal.LESSEQualsets the qualifier to less than or equal.MOREEQualsets the qualifier to greater than or equal.INrangesets the qualifier to in range.OUTrangesets the qualifier to out of range.
tdmvalue
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:DATa:TDMVALue command.
Description
- This command sets or queries the binary data string for the single or low data word to
be used when searching on an TDM audio bus signal. The search condition must be set to
DATA using
SEARCH:SEARCH:TRIGger:A:BUS:AUDio:CONDition.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:DATa:TDMVALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:DATa:TDMVALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:DATa:TDMVALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:DATa:TDMVALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:DATa:TDMVALue?
Info
<QString>is the binary data string for the single or low data word to be used when searching on an TDM audio bus signal.
value
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:DATa:VALue command.
Description
- This command sets or queries the binary data string for the single or low data word to
be used when searching on an audio bus signal. The search condition must be set to
DATA using
SEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:{NONTdm|TDM}:CONDition. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:DATa:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:DATa:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:DATa:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:DATa:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:DATa:VALue?
Info
<QString>is the lower word value.
word
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:DATa:WORD command.
Description
- This command sets or queries the alignment of the data (left, right or either) to be
used when searching on a non-TDM type audio bus signal. The search condition must be
set to DATA using
SEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:NONTdm:CONDition. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:DATa:WORD?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:DATa:WORD?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:DATa:WORD valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:DATa:WORD {EITher|LEFt|RIGht}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:DATa:WORD?
Info
EITheraligns the data to either left or right.LEFtaligns the data to the left.RIGhtaligns the data to the right.
SearchSearchItemTriggerABusAudioDataHitdmvalue
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:DATa:HITDMVALue command.
Description
- This command sets or queries the binary data string for the high data word to be used when
searching on an TDM audio bus signal. The search condition must be set to DATa using
SEARCH:SEARCH:TRIGger:A:BUS:AUDio:CONDition.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:DATa:HITDMVALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:DATa:HITDMVALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:DATa:HITDMVALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:DATa:HITDMVALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:DATa:HITDMVALue?
Info
<QString>is the binary data string for the high data word to be used when searching on an TDM audio bus signal.
SearchSearchItemTriggerABusAudioDataHivalue
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:DATa:HIVALue command.
Description
- This command sets or queries the binary data string for the high data word to be used when
searching on an audio bus signal. The search condition must be set to DATa using
:SEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:CONDition. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:DATa:HIVALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:DATa:HIVALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:DATa:HIVALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:DATa:HIVALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:DATa:HIVALue?
Info
<QString>specifies the upper word value.
SearchSearchItemTriggerABusAudioDataOffset
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:DATa:OFFSet command.
Description
- This command sets or queries the data offset value (TDM channel) to be used when searching
on a TDM type audio bus signal. The search condition must be set to DATa using
SEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:TDM:CONDition. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:DATa:OFFSet?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:DATa:OFFSet?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:DATa:OFFSet valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:DATa:OFFSet <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:DATa:OFFSet?
Info
<NR1>is the data offset value.
SearchSearchItemTriggerABusAudioDataQualifier
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:DATa:QUALifier command.
Description
- This command sets or queries the qualifier to be used when searching on an audio bus
signal. The search condition must be set to DATa using
SEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:{NONTdm|TDM}:CONDition. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:DATa:QUALifier?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:DATa:QUALifier?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:DATa:QUALifier valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:DATa:QUALifier {EQual|UNEQual|LESSthan|MOREthan|LESSEQual|MOREEQual|INrange|OUTrange}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:DATa:QUALifier?
Info
LESSthansets the qualifier to less than.MOREthansets the qualifier to greater than.EQualsets the qualifier to equal.UNEQualsets the qualifier to not equal.LESSEQualsets the qualifier to less than or equal.MOREEQualsets the qualifier to greater than or equal.INrangesets the qualifier to in range.OUTrangesets the qualifier to out of range.
SearchSearchItemTriggerABusAudioDataTdmvalue
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:DATa:TDMVALue command.
Description
- This command sets or queries the binary data string for the single or low data word to be
used when searching on an TDM audio bus signal. The search condition must be set to DATA
using
SEARCH:SEARCH:TRIGger:A:BUS:AUDio:CONDition.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:DATa:TDMVALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:DATa:TDMVALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:DATa:TDMVALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:DATa:TDMVALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:DATa:TDMVALue?
Info
<QString>is the binary data string for the single or low data word to be used when searching on an TDM audio bus signal.
SearchSearchItemTriggerABusAudioDataValue
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:DATa:VALue command.
Description
- This command sets or queries the binary data string for the single or low data word to be
used when searching on an audio bus signal. The search condition must be set to DATA using
SEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:{NONTdm|TDM}:CONDition. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:DATa:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:DATa:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:DATa:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:DATa:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:DATa:VALue?
Info
<QString>is the lower word value.
SearchSearchItemTriggerABusAudioDataWord
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:DATa:WORD command.
Description
- This command sets or queries the alignment of the data (left, right or either) to be used
when searching on a non-TDM type audio bus signal. The search condition must be set to
DATA using
SEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:NONTdm:CONDition. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:DATa:WORD?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:DATa:WORD?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:DATa:WORD valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:DATa:WORD {EITher|LEFt|RIGht}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUDio:DATa:WORD?
Info
EITheraligns the data to either left or right.LEFtaligns the data to the left.RIGhtaligns the data to the right.
SearchSearchItemTriggerABusAutoethernet
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.condition: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:CONDitioncommand..data: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:DATacommand tree..ipheader: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:IPHeadercommand tree..mac: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:MACcommand tree..qtag: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:QTAGcommand tree..qualifier: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:QUALifiercommand..tcpheader: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:TCPHeadercommand tree.
condition
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:CONDition command.
Description
- This command sets or queries the field or condition for which to search an AutoEthernet.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:CONDition?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:CONDition?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:CONDition valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:CONDition {SSD|SFD|MACADDRess|MACLENgth|IPHeader|TCPHeader|DATa|EOP|FCSError|QTAG}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:CONDition?
Info
Search<x>is the Search number.SSDspecifies to search for Start of frame.SFDspecifies to search for Start of frame delimiter.MACADDRessspecifies to search for MAC addresses field.MACLENgthspecifies to search for MAC length/type field.IPHeaderspecifies to search for IP header field.TCPHeaderspecifies to search for TCP header field.DATaspecifies to search for TCP/IPv4 or MAC protocol client data field.EOPspecifies to search for End of Packet field.FCSErrorspecifies to search for Frame Check Sequence Error (CRC) field.QTAGspecifies to search for IEEE 802.1Q (VLAN) control information field.
data
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:DATa command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:DATa?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:DATa?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.hivalue: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:DATa:HIVALuecommand..offset: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:DATa:OFFSetcommand..size: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:DATa:SIZecommand..value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:DATa:VALuecommand.
ipheader
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:IPHeader command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:IPHeader?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:IPHeader?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.destinationaddr: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:IPHeader:DESTinationaddrcommand tree..protocol: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:IPHeader:PROTOcolcommand tree..sourceaddr: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:IPHeader:SOUrceaddrcommand tree.
mac
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:MAC command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:MAC?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:MAC?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.address: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:MAC:ADDResscommand tree..length: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:MAC:LENgthcommand tree.
qtag
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:QTAG command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:QTAG?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:QTAG?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:QTAG:VALuecommand.
qualifier
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:QUALifier command.
Description
- This command sets or queries the qualifier to be used when searching on an AutoEthernet bus signal. The search condition must be set to Client Data or MAC Length/Type.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:QUALifier?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:QUALifier?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:QUALifier valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:QUALifier {LESSthan|MOREthan|EQual|UNEQual|LESSEQual|MOREEQual|INrange|OUTrange}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:QUALifier?
Info
Search<x>is the Search number.LESSthansets the qualifier to less than.MOREthansets the qualifier to greater than.EQualsets the qualifier to equal.UNEQualsets the qualifier to not equal.LESSEQualsets the qualifier to less than or equal.MOREEQualsets the qualifier to greater than or equal.INrangesets the qualifier to in range.OUTrangesets the qualifier to out of range.
tcpheader
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:TCPHeader command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:TCPHeader?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:TCPHeader?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.acknum: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:TCPHeader:ACKnumcommand tree..destinationport: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:TCPHeader:DESTinationportcommand tree..seqnum: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:TCPHeader:SEQnumcommand tree..sourceport: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:TCPHeader:SOUrceportcommand tree.
SearchSearchItemTriggerABusAutoethernetCondition
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:CONDition command.
Description
- This command sets or queries the field or condition for which to search an AutoEthernet.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:CONDition?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:CONDition?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:CONDition valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:CONDition {SSD|SFD|MACADDRess|MACLENgth|IPHeader|TCPHeader|DATa|EOP|FCSError|QTAG}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:CONDition?
Info
Search<x>is the Search number.SSDspecifies to search for Start of frame.SFDspecifies to search for Start of frame delimiter.MACADDRessspecifies to search for MAC addresses field.MACLENgthspecifies to search for MAC length/type field.IPHeaderspecifies to search for IP header field.TCPHeaderspecifies to search for TCP header field.DATaspecifies to search for TCP/IPv4 or MAC protocol client data field.EOPspecifies to search for End of Packet field.FCSErrorspecifies to search for Frame Check Sequence Error (CRC) field.QTAGspecifies to search for IEEE 802.1Q (VLAN) control information field.
SearchSearchItemTriggerABusAutoethernetData
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:DATa command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:DATa?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:DATa?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.hivalue: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:DATa:HIVALuecommand..offset: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:DATa:OFFSetcommand..size: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:DATa:SIZecommand..value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:DATa:VALuecommand.
hivalue
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:DATa:HIVALue command.
Description
- This command sets or queries the binary data value to be used when searching on an AutoEthernet bus signal. The search condition must be set to DATA and the data qualifier to inside or outside range.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:DATa:HIVALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:DATa:HIVALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:DATa:HIVALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:DATa:HIVALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:DATa:HIVALue?
Info
Search<x>is the Search number.QStringspecifies the binary data value to be used when searching on an AutoEthernet bus signal.
offset
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:DATa:OFFSet command.
Description
- This command sets or queries the data offset value, in bytes, to use when searching on the AutoEthernet data field. The search condition needs to be set to DATa.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:DATa:OFFSet?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:DATa:OFFSet?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:DATa:OFFSet valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:DATa:OFFSet <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:DATa:OFFSet?
Info
Search<x>is the Search number.NR1sets the data offset value, in bytes. It is an integer value whose minimum and default values are -1 (don’t care) and maximum is 1,499.
size
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:DATa:SIZe command.
Description
- This command sets or queries the length of the data string, in bytes, to use when searching on the AutoEthernet bus signal. The search condition needs to be set to DATa.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:DATa:SIZe?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:DATa:SIZe?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:DATa:SIZe valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:DATa:SIZe <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:DATa:SIZe?
Info
Search<x>is the Search number.NR1sets the data length, in bytes. It is an integer value whose minimum and default values are 1, and the maximum value is 16.
value
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:DATa:VALue command.
Description
- This command sets or queries the binary value to use when searching on the AutoEthernet bus signal. The search condition needs to be set to DATa.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:DATa:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:DATa:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:DATa:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:DATa:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:DATa:VALue?
Info
Search<x>is the Search number.QStringis a quoted string where the allowable characters are 0, 1, and X. The allowable number of characters depends on the setting for size (usingSEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:DATa:SIZe). The bits specified in the quoted string replace the least significant bits (LSB), leaving any unspecified upper bits unchanged.
SearchSearchItemTriggerABusAutoethernetDataHivalue
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:DATa:HIVALue command.
Description
- This command sets or queries the binary data value to be used when searching on an AutoEthernet bus signal. The search condition must be set to DATA and the data qualifier to inside or outside range.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:DATa:HIVALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:DATa:HIVALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:DATa:HIVALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:DATa:HIVALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:DATa:HIVALue?
Info
Search<x>is the Search number.QStringspecifies the binary data value to be used when searching on an AutoEthernet bus signal.
SearchSearchItemTriggerABusAutoethernetDataOffset
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:DATa:OFFSet command.
Description
- This command sets or queries the data offset value, in bytes, to use when searching on the AutoEthernet data field. The search condition needs to be set to DATa.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:DATa:OFFSet?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:DATa:OFFSet?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:DATa:OFFSet valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:DATa:OFFSet <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:DATa:OFFSet?
Info
Search<x>is the Search number.NR1sets the data offset value, in bytes. It is an integer value whose minimum and default values are -1 (don’t care) and maximum is 1,499.
SearchSearchItemTriggerABusAutoethernetDataSize
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:DATa:SIZe command.
Description
- This command sets or queries the length of the data string, in bytes, to use when searching on the AutoEthernet bus signal. The search condition needs to be set to DATa.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:DATa:SIZe?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:DATa:SIZe?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:DATa:SIZe valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:DATa:SIZe <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:DATa:SIZe?
Info
Search<x>is the Search number.NR1sets the data length, in bytes. It is an integer value whose minimum and default values are 1, and the maximum value is 16.
SearchSearchItemTriggerABusAutoethernetDataValue
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:DATa:VALue command.
Description
- This command sets or queries the binary value to use when searching on the AutoEthernet bus signal. The search condition needs to be set to DATa.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:DATa:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:DATa:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:DATa:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:DATa:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:DATa:VALue?
Info
Search<x>is the Search number.QStringis a quoted string where the allowable characters are 0, 1, and X. The allowable number of characters depends on the setting for size (usingSEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:DATa:SIZe). The bits specified in the quoted string replace the least significant bits (LSB), leaving any unspecified upper bits unchanged.
SearchSearchItemTriggerABusAutoethernetIpheader
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:IPHeader command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:IPHeader?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:IPHeader?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.destinationaddr: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:IPHeader:DESTinationaddrcommand tree..protocol: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:IPHeader:PROTOcolcommand tree..sourceaddr: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:IPHeader:SOUrceaddrcommand tree.
destinationaddr
property
¶
destinationaddr: SearchSearchItemTriggerABusAutoethernetIpheaderDestinationaddr
SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:IPHeader:DESTinationaddr command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:IPHeader:DESTinationaddr?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:IPHeader:DESTinationaddr?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:IPHeader:DESTinationaddr:VALuecommand.
protocol
property
¶
SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:IPHeader:PROTOcol command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:IPHeader:PROTOcol?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:IPHeader:PROTOcol?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:IPHeader:PROTOcol:VALuecommand.
sourceaddr
property
¶
SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:IPHeader:SOUrceaddr command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:IPHeader:SOUrceaddr?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:IPHeader:SOUrceaddr?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:IPHeader:SOUrceaddr:VALuecommand.
SearchSearchItemTriggerABusAutoethernetIpheaderDestinationaddr
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:IPHeader:DESTinationaddr command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:IPHeader:DESTinationaddr?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:IPHeader:DESTinationaddr?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:IPHeader:DESTinationaddr:VALuecommand.
value
property
¶
SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:IPHeader:DESTinationaddr:VALue command.
Description
- This command sets or queries the binary destination address value to use when searching on an AutoEthernet bus signal. The search condition needs to be set to IPHeader.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:IPHeader:DESTinationaddr:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:IPHeader:DESTinationaddr:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:IPHeader:DESTinationaddr:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:IPHeader:DESTinationaddr:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:IPHeader:DESTinationaddr:VALue?
Info
Search<x>is the Search number.QStringis a quoted string of up to 32 characters that sets the IP address, where the allowable characters are 0, 1, and X. The bits specified in the quoted string replace the least significant bits (LSB), leaving any unspecified upper bits unchanged.
SearchSearchItemTriggerABusAutoethernetIpheaderDestinationaddrValue
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:IPHeader:DESTinationaddr:VALue command.
Description
- This command sets or queries the binary destination address value to use when searching on an AutoEthernet bus signal. The search condition needs to be set to IPHeader.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:IPHeader:DESTinationaddr:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:IPHeader:DESTinationaddr:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:IPHeader:DESTinationaddr:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:IPHeader:DESTinationaddr:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:IPHeader:DESTinationaddr:VALue?
Info
Search<x>is the Search number.QStringis a quoted string of up to 32 characters that sets the IP address, where the allowable characters are 0, 1, and X. The bits specified in the quoted string replace the least significant bits (LSB), leaving any unspecified upper bits unchanged.
SearchSearchItemTriggerABusAutoethernetIpheaderProtocol
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:IPHeader:PROTOcol command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:IPHeader:PROTOcol?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:IPHeader:PROTOcol?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:IPHeader:PROTOcol:VALuecommand.
value
property
¶
SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:IPHeader:PROTOcol:VALue command.
Description
- This command sets or queries the binary protocol value to use when searching on the Ethernet bus signal. The search condition needs to be set to IPHeader.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:IPHeader:PROTOcol:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:IPHeader:PROTOcol:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:IPHeader:PROTOcol:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:IPHeader:PROTOcol:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:IPHeader:PROTOcol:VALue?
Info
Search<x>is the Search number.QStringis a quoted string of up to eight (8) characters where the allowable characters are 0, 1, and X. The bits specified in the quoted string replace the least significant bits (LSB), leaving any unspecified upper bits unchanged.
SearchSearchItemTriggerABusAutoethernetIpheaderProtocolValue
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:IPHeader:PROTOcol:VALue command.
Description
- This command sets or queries the binary protocol value to use when searching on the Ethernet bus signal. The search condition needs to be set to IPHeader.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:IPHeader:PROTOcol:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:IPHeader:PROTOcol:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:IPHeader:PROTOcol:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:IPHeader:PROTOcol:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:IPHeader:PROTOcol:VALue?
Info
Search<x>is the Search number.QStringis a quoted string of up to eight (8) characters where the allowable characters are 0, 1, and X. The bits specified in the quoted string replace the least significant bits (LSB), leaving any unspecified upper bits unchanged.
SearchSearchItemTriggerABusAutoethernetIpheaderSourceaddr
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:IPHeader:SOUrceaddr command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:IPHeader:SOUrceaddr?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:IPHeader:SOUrceaddr?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:IPHeader:SOUrceaddr:VALuecommand.
value
property
¶
SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:IPHeader:SOUrceaddr:VALue command.
Description
- This command sets or queries the binary source address value to use when searching on an AutoEthernet bus signal. The search condition needs to be set to IPHeader.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:IPHeader:SOUrceaddr:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:IPHeader:SOUrceaddr:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:IPHeader:SOUrceaddr:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:IPHeader:SOUrceaddr:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:IPHeader:SOUrceaddr:VALue?
Info
Search<x>is the Search number.QStringis a quoted string of up to 32 characters, where the allowable characters are 0, 1, and X. The bits specified in the quoted string replace the least significant bits (LSB), leaving any unspecified upper bits unchanged.
SearchSearchItemTriggerABusAutoethernetIpheaderSourceaddrValue
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:IPHeader:SOUrceaddr:VALue command.
Description
- This command sets or queries the binary source address value to use when searching on an AutoEthernet bus signal. The search condition needs to be set to IPHeader.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:IPHeader:SOUrceaddr:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:IPHeader:SOUrceaddr:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:IPHeader:SOUrceaddr:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:IPHeader:SOUrceaddr:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:IPHeader:SOUrceaddr:VALue?
Info
Search<x>is the Search number.QStringis a quoted string of up to 32 characters, where the allowable characters are 0, 1, and X. The bits specified in the quoted string replace the least significant bits (LSB), leaving any unspecified upper bits unchanged.
SearchSearchItemTriggerABusAutoethernetMac
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:MAC command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:MAC?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:MAC?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.address: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:MAC:ADDResscommand tree..length: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:MAC:LENgthcommand tree.
address
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:MAC:ADDRess command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:MAC:ADDRess?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:MAC:ADDRess?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.destination: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:MAC:ADDRess:DESTinationcommand tree..source: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:MAC:ADDRess:SOUrcecommand tree.
length
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:MAC:LENgth command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:MAC:LENgth?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:MAC:LENgth?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.hivalue: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:MAC:LENgth:HIVALuecommand..value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:MAC:LENgth:VALuecommand.
SearchSearchItemTriggerABusAutoethernetMacAddress
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:MAC:ADDRess command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:MAC:ADDRess?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:MAC:ADDRess?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.destination: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:MAC:ADDRess:DESTinationcommand tree..source: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:MAC:ADDRess:SOUrcecommand tree.
destination
property
¶
SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:MAC:ADDRess:DESTination command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:MAC:ADDRess:DESTination?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:MAC:ADDRess:DESTination?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:MAC:ADDRess:DESTination:VALuecommand.
source
property
¶
SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:MAC:ADDRess:SOUrce command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:MAC:ADDRess:SOUrce?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:MAC:ADDRess:SOUrce?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:MAC:ADDRess:SOUrce:VALuecommand.
SearchSearchItemTriggerABusAutoethernetMacAddressDestination
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:MAC:ADDRess:DESTination command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:MAC:ADDRess:DESTination?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:MAC:ADDRess:DESTination?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:MAC:ADDRess:DESTination:VALuecommand.
value
property
¶
SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:MAC:ADDRess:DESTination:VALue command.
Description
- This command sets or queries the binary MAC address destination value to use when searching on an AutoEthernet bus signal. The search condition needs to be set to MACADDRess.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:MAC:ADDRess:DESTination:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:MAC:ADDRess:DESTination:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:MAC:ADDRess:DESTination:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:MAC:ADDRess:DESTination:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:MAC:ADDRess:DESTination:VALue?
Info
Search<x>is the Search number.QStringis a quoted string of up to 48 characters where the allowable characters are 0, 1, and X. The bits specified in the quoted string replace the least significant bits (LSB), leaving any unspecified upper bits unchanged.
SearchSearchItemTriggerABusAutoethernetMacAddressDestinationValue
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:MAC:ADDRess:DESTination:VALue command.
Description
- This command sets or queries the binary MAC address destination value to use when searching on an AutoEthernet bus signal. The search condition needs to be set to MACADDRess.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:MAC:ADDRess:DESTination:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:MAC:ADDRess:DESTination:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:MAC:ADDRess:DESTination:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:MAC:ADDRess:DESTination:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:MAC:ADDRess:DESTination:VALue?
Info
Search<x>is the Search number.QStringis a quoted string of up to 48 characters where the allowable characters are 0, 1, and X. The bits specified in the quoted string replace the least significant bits (LSB), leaving any unspecified upper bits unchanged.
SearchSearchItemTriggerABusAutoethernetMacAddressSource
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:MAC:ADDRess:SOUrce command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:MAC:ADDRess:SOUrce?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:MAC:ADDRess:SOUrce?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:MAC:ADDRess:SOUrce:VALuecommand.
value
property
¶
SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:MAC:ADDRess:SOUrce:VALue command.
Description
- This command sets or queries the binary MAC address source value to use when searching on an AutoEthernet bus signal. The search condition needs to be set to MACADDRess.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:MAC:ADDRess:SOUrce:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:MAC:ADDRess:SOUrce:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:MAC:ADDRess:SOUrce:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:MAC:ADDRess:SOUrce:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:MAC:ADDRess:SOUrce:VALue?
Info
Search<x>is the Search number.QStringis a quoted string of up to 48 characters where the allowable characters are 0, 1, and X. The bits specified in the quoted string replace the least significant bits (LSB), leaving any unspecified upper bits unchanged.
SearchSearchItemTriggerABusAutoethernetMacAddressSourceValue
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:MAC:ADDRess:SOUrce:VALue command.
Description
- This command sets or queries the binary MAC address source value to use when searching on an AutoEthernet bus signal. The search condition needs to be set to MACADDRess.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:MAC:ADDRess:SOUrce:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:MAC:ADDRess:SOUrce:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:MAC:ADDRess:SOUrce:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:MAC:ADDRess:SOUrce:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:MAC:ADDRess:SOUrce:VALue?
Info
Search<x>is the Search number.QStringis a quoted string of up to 48 characters where the allowable characters are 0, 1, and X. The bits specified in the quoted string replace the least significant bits (LSB), leaving any unspecified upper bits unchanged.
SearchSearchItemTriggerABusAutoethernetMacLength
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:MAC:LENgth command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:MAC:LENgth?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:MAC:LENgth?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.hivalue: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:MAC:LENgth:HIVALuecommand..value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:MAC:LENgth:VALuecommand.
hivalue
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:MAC:LENgth:HIVALue command.
Description
- This command sets or queries the binary MAC length high value to use when searching on an AutoEthernet bus signal. The search condition needs to be set to MACADDRess.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:MAC:LENgth:HIVALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:MAC:LENgth:HIVALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:MAC:LENgth:HIVALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:MAC:LENgth:HIVALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:MAC:LENgth:HIVALue?
Info
Search<x>is the Search number.QStringis a quoted string of up to 16 characters where the allowable characters are 0, 1, and X. The bits specified in the quoted string replace the least significant bits (LSB), leaving any unspecified upper bits unchanged.
value
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:MAC:LENgth:VALue command.
Description
- This command sets or queries the MAC length value to use when searching on an Ethernet bus signal. The search condition needs to be set to MACADDRess.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:MAC:LENgth:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:MAC:LENgth:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:MAC:LENgth:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:MAC:LENgth:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:MAC:LENgth:VALue?
Info
Search<x>is the Search number.QStringis a quoted string of up to 16 characters where the allowable characters are 0, 1, and X. The bits specified in the quoted string replace the least significant bits (LSB), leaving any unspecified upper bits unchanged.
SearchSearchItemTriggerABusAutoethernetMacLengthHivalue
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:MAC:LENgth:HIVALue command.
Description
- This command sets or queries the binary MAC length high value to use when searching on an AutoEthernet bus signal. The search condition needs to be set to MACADDRess.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:MAC:LENgth:HIVALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:MAC:LENgth:HIVALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:MAC:LENgth:HIVALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:MAC:LENgth:HIVALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:MAC:LENgth:HIVALue?
Info
Search<x>is the Search number.QStringis a quoted string of up to 16 characters where the allowable characters are 0, 1, and X. The bits specified in the quoted string replace the least significant bits (LSB), leaving any unspecified upper bits unchanged.
SearchSearchItemTriggerABusAutoethernetMacLengthValue
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:MAC:LENgth:VALue command.
Description
- This command sets or queries the MAC length value to use when searching on an Ethernet bus signal. The search condition needs to be set to MACADDRess.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:MAC:LENgth:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:MAC:LENgth:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:MAC:LENgth:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:MAC:LENgth:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:MAC:LENgth:VALue?
Info
Search<x>is the Search number.QStringis a quoted string of up to 16 characters where the allowable characters are 0, 1, and X. The bits specified in the quoted string replace the least significant bits (LSB), leaving any unspecified upper bits unchanged.
SearchSearchItemTriggerABusAutoethernetQtag
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:QTAG command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:QTAG?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:QTAG?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:QTAG:VALuecommand.
value
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:QTAG:VALue command.
Description
- This command sets or queries the binary Q-tag information to use when searching on an AutoEthernet bus signal. The search condition needs to be set to QTAG.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:QTAG:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:QTAG:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:QTAG:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:QTAG:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:QTAG:VALue?
Info
Search<x>is the Search number.QStringis a quoted string of up to 32 characters where the allowable characters are 0, 1, and X. The bits specified in the quoted string replace the least significant bits (LSB), leaving any unspecified upper bits unchanged.
SearchSearchItemTriggerABusAutoethernetQtagValue
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:QTAG:VALue command.
Description
- This command sets or queries the binary Q-tag information to use when searching on an AutoEthernet bus signal. The search condition needs to be set to QTAG.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:QTAG:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:QTAG:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:QTAG:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:QTAG:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:QTAG:VALue?
Info
Search<x>is the Search number.QStringis a quoted string of up to 32 characters where the allowable characters are 0, 1, and X. The bits specified in the quoted string replace the least significant bits (LSB), leaving any unspecified upper bits unchanged.
SearchSearchItemTriggerABusAutoethernetQualifier
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:QUALifier command.
Description
- This command sets or queries the qualifier to be used when searching on an AutoEthernet bus signal. The search condition must be set to Client Data or MAC Length/Type.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:QUALifier?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:QUALifier?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:QUALifier valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:QUALifier {LESSthan|MOREthan|EQual|UNEQual|LESSEQual|MOREEQual|INrange|OUTrange}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:QUALifier?
Info
Search<x>is the Search number.LESSthansets the qualifier to less than.MOREthansets the qualifier to greater than.EQualsets the qualifier to equal.UNEQualsets the qualifier to not equal.LESSEQualsets the qualifier to less than or equal.MOREEQualsets the qualifier to greater than or equal.INrangesets the qualifier to in range.OUTrangesets the qualifier to out of range.
SearchSearchItemTriggerABusAutoethernetTcpheader
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:TCPHeader command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:TCPHeader?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:TCPHeader?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.acknum: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:TCPHeader:ACKnumcommand tree..destinationport: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:TCPHeader:DESTinationportcommand tree..seqnum: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:TCPHeader:SEQnumcommand tree..sourceport: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:TCPHeader:SOUrceportcommand tree.
acknum
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:TCPHeader:ACKnum command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:TCPHeader:ACKnum?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:TCPHeader:ACKnum?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:TCPHeader:ACKnum:VALuecommand.
destinationport
property
¶
destinationport: SearchSearchItemTriggerABusAutoethernetTcpheaderDestinationport
SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:TCPHeader:DESTinationport command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:TCPHeader:DESTinationport?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:TCPHeader:DESTinationport?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:TCPHeader:DESTinationport:VALuecommand.
seqnum
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:TCPHeader:SEQnum command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:TCPHeader:SEQnum?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:TCPHeader:SEQnum?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:TCPHeader:SEQnum:VALuecommand.
sourceport
property
¶
SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:TCPHeader:SOUrceport command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:TCPHeader:SOUrceport?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:TCPHeader:SOUrceport?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:TCPHeader:SOUrceport:VALuecommand.
SearchSearchItemTriggerABusAutoethernetTcpheaderAcknum
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:TCPHeader:ACKnum command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:TCPHeader:ACKnum?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:TCPHeader:ACKnum?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:TCPHeader:ACKnum:VALuecommand.
value
property
¶
SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:TCPHeader:ACKnum:VALue command.
Description
- This command sets or queries the binary ack number value to use when searching on an AutoEthernet bus signal. The default is all X’s (don’t care). The search condition needs to be set to TCPHeader.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:TCPHeader:ACKnum:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:TCPHeader:ACKnum:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:TCPHeader:ACKnum:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:TCPHeader:ACKnum:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:TCPHeader:ACKnum:VALue?
Info
Search<x>is the Search number.QStringis a quoted string of up to 32 characters where the allowable characters are 0, 1, and X. The bits specified in the quoted string replace the least significant bits (LSB), leaving any unspecified upper bits unchanged.
SearchSearchItemTriggerABusAutoethernetTcpheaderAcknumValue
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:TCPHeader:ACKnum:VALue command.
Description
- This command sets or queries the binary ack number value to use when searching on an AutoEthernet bus signal. The default is all X’s (don’t care). The search condition needs to be set to TCPHeader.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:TCPHeader:ACKnum:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:TCPHeader:ACKnum:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:TCPHeader:ACKnum:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:TCPHeader:ACKnum:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:TCPHeader:ACKnum:VALue?
Info
Search<x>is the Search number.QStringis a quoted string of up to 32 characters where the allowable characters are 0, 1, and X. The bits specified in the quoted string replace the least significant bits (LSB), leaving any unspecified upper bits unchanged.
SearchSearchItemTriggerABusAutoethernetTcpheaderDestinationport
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:TCPHeader:DESTinationport command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:TCPHeader:DESTinationport?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:TCPHeader:DESTinationport?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:TCPHeader:DESTinationport:VALuecommand.
value
property
¶
SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:TCPHeader:DESTinationport:VALue command.
Description
- This command sets or queries the binary destination port value to use when searching on the AutoEthernet TCP header destination port number. The search condition needs to be set to TCPHeader.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:TCPHeader:DESTinationport:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:TCPHeader:DESTinationport:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:TCPHeader:DESTinationport:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:TCPHeader:DESTinationport:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:TCPHeader:DESTinationport:VALue?
Info
Search<x>is the Search number.QStringis a quoted string of up to 16 characters where the allowable characters are 0, 1, and X. The bits specified in the quoted string replace the least significant bits (LSB), leaving any unspecified upper bits unchanged.
SearchSearchItemTriggerABusAutoethernetTcpheaderDestinationportValue
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:TCPHeader:DESTinationport:VALue command.
Description
- This command sets or queries the binary destination port value to use when searching on the AutoEthernet TCP header destination port number. The search condition needs to be set to TCPHeader.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:TCPHeader:DESTinationport:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:TCPHeader:DESTinationport:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:TCPHeader:DESTinationport:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:TCPHeader:DESTinationport:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:TCPHeader:DESTinationport:VALue?
Info
Search<x>is the Search number.QStringis a quoted string of up to 16 characters where the allowable characters are 0, 1, and X. The bits specified in the quoted string replace the least significant bits (LSB), leaving any unspecified upper bits unchanged.
SearchSearchItemTriggerABusAutoethernetTcpheaderSeqnum
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:TCPHeader:SEQnum command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:TCPHeader:SEQnum?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:TCPHeader:SEQnum?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:TCPHeader:SEQnum:VALuecommand.
value
property
¶
SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:TCPHeader:SEQnum:VALue command.
Description
- This command sets or queries the TCP header sequence number value to use when searching on the AutoEthernet TCP header destination port number. The search condition needs to be set to TCPHeader.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:TCPHeader:SEQnum:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:TCPHeader:SEQnum:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:TCPHeader:SEQnum:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:TCPHeader:SEQnum:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:TCPHeader:SEQnum:VALue?
Info
Search<x>is the Search number.QStringis a quoted string of up to 32 characters where the allowable characters are 0, 1, and X. The bits specified in the quoted string replace the least significant bits (LSB), leaving any unspecified upper bits unchanged.
SearchSearchItemTriggerABusAutoethernetTcpheaderSeqnumValue
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:TCPHeader:SEQnum:VALue command.
Description
- This command sets or queries the TCP header sequence number value to use when searching on the AutoEthernet TCP header destination port number. The search condition needs to be set to TCPHeader.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:TCPHeader:SEQnum:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:TCPHeader:SEQnum:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:TCPHeader:SEQnum:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:TCPHeader:SEQnum:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:TCPHeader:SEQnum:VALue?
Info
Search<x>is the Search number.QStringis a quoted string of up to 32 characters where the allowable characters are 0, 1, and X. The bits specified in the quoted string replace the least significant bits (LSB), leaving any unspecified upper bits unchanged.
SearchSearchItemTriggerABusAutoethernetTcpheaderSourceport
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:TCPHeader:SOUrceport command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:TCPHeader:SOUrceport?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:TCPHeader:SOUrceport?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:TCPHeader:SOUrceport:VALuecommand.
value
property
¶
SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:TCPHeader:SOUrceport:VALue command.
Description
- This command sets or queries the binary source port value to use when searching on an AutoEthernet bus signal. The search condition needs to be set to TCPHeader.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:TCPHeader:SOUrceport:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:TCPHeader:SOUrceport:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:TCPHeader:SOUrceport:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:TCPHeader:SOUrceport:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:TCPHeader:SOUrceport:VALue?
Info
Search<x>is the Search number.QStringis a quoted string of up to 16 characters where the allowable characters are 0, 1, and X. The bits specified in the quoted string replace the least significant bits (LSB), leaving any unspecified upper bits unchanged.
SearchSearchItemTriggerABusAutoethernetTcpheaderSourceportValue
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:TCPHeader:SOUrceport:VALue command.
Description
- This command sets or queries the binary source port value to use when searching on an AutoEthernet bus signal. The search condition needs to be set to TCPHeader.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:TCPHeader:SOUrceport:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:TCPHeader:SOUrceport:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:TCPHeader:SOUrceport:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:TCPHeader:SOUrceport:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:AUTOETHERnet:TCPHeader:SOUrceport:VALue?
Info
Search<x>is the Search number.QStringis a quoted string of up to 16 characters where the allowable characters are 0, 1, and X. The bits specified in the quoted string replace the least significant bits (LSB), leaving any unspecified upper bits unchanged.
SearchSearchItemTriggerABusB
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:B command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:B?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:B?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.nrz: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:B:NRZcommand tree..psifive: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVecommand tree..s8b10b: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:B:S8B10Bcommand tree.
nrz
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:B:NRZ command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:B:NRZ?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:B:NRZ?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.condition: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:B:NRZ:CONDitioncommand.
psifive
property
¶
psifive: SearchSearchItemTriggerABusBPsifive
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.blockdata: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:BLOCKDATacommand tree..condition: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:CONDitioncommand..databits: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:DATABITscommand..data: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:DATacommand tree..errortype: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:ERRORTYPecommand..functioncodetype: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:FUNCTIONCODETYPecommand..registeraddress: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:REGISTERADDResscommand..register: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:REGistercommand tree..sensorstatus: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:SENSORSTATuscommand tree..sensor: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:SENSorcommand tree..status: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:STATuscommand tree.
s8b10b
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:B:S8B10B command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:B:S8B10B?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:B:S8B10B?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.condition: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:B:S8B10B:CONDitioncommand.
SearchSearchItemTriggerABusBNrz
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:B:NRZ command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:B:NRZ?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:B:NRZ?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.condition: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:B:NRZ:CONDitioncommand.
condition
property
¶
condition: SearchSearchItemTriggerABusBNrzCondition
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:B:NRZ:CONDition command.
Description
- This command specifies a field or condition for an NRZ bus to search on. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:B:NRZ:CONDition?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:B:NRZ:CONDition?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:B:NRZ:CONDition valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B:NRZ:CONDition {DATa}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B:NRZ:CONDition?
Info
Search<x>is the number of the search.DATaspecifies the search condition as Data Characters.
SearchSearchItemTriggerABusBNrzCondition
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:B:NRZ:CONDition command.
Description
- This command specifies a field or condition for an NRZ bus to search on. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:B:NRZ:CONDition?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:B:NRZ:CONDition?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:B:NRZ:CONDition valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B:NRZ:CONDition {DATa}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B:NRZ:CONDition?
Info
Search<x>is the number of the search.DATaspecifies the search condition as Data Characters.
SearchSearchItemTriggerABusBPsifive
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.blockdata: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:BLOCKDATacommand tree..condition: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:CONDitioncommand..databits: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:DATABITscommand..data: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:DATacommand tree..errortype: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:ERRORTYPecommand..functioncodetype: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:FUNCTIONCODETYPecommand..registeraddress: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:REGISTERADDResscommand..register: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:REGistercommand tree..sensorstatus: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:SENSORSTATuscommand tree..sensor: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:SENSorcommand tree..status: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:STATuscommand tree.
blockdata
property
¶
blockdata: SearchSearchItemTriggerABusBPsifiveBlockdata
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:BLOCKDATa command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:BLOCKDATa?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:BLOCKDATa?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:BLOCKDATa:VALuecommand.
condition
property
¶
condition: SearchSearchItemTriggerABusBPsifiveCondition
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:CONDition command.
Description
- This command sets or queries the trigger condition for an PSI5 bus. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:CONDition?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:CONDition?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:CONDition valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:CONDition {STARt|STATus|DATa|BLOCkid|SENSORSTATus|ERRors|STARTBIT|FUNCTIONCODe|ECUDATa|SENSORADDRess|REGISTERADDRess|CRCERRor}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:CONDition?
Info
STARtspecifies the search condition as Start. This is the default trigger.STATusspecifies the search condition as Status.DATaspecifies the search condition as Data.BLOCkidspecifies the search condition as Block ID.SENSORSTATusspecifies the search condition as Sensor Status.ERRorsspecifies the search condition as Errors.STARTBITspecifies the search condition as Start Bit.FUNCTIONCODespecifies the search condition as Function Code.ECUDATaspecifies the search condition as ECU Data.SENSORADDRessspecifies the search condition as Sensor Address.REGISTERADDRessspecifies the search condition as Register Address.CRCERRorspecifies the search condition as CRC Error.
data
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:DATa command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:DATa?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:DATa?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.ecu: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:DATa:ECUcommand tree..region: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:DATa:REGioncommand tree.
databits
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:DATABITs command.
Description
- This command sets or queries the binary register address string used for PSI5 triggering if the trigger condition is Data in ECU to Sensor communication mode. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:DATABITs?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:DATABITs?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:DATABITs valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:DATABITs {FOURBIT|EIGHTBIT|TWENTYBIT}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:DATABITs?
Info
FOURBITspecifies the data bit value as 4 bit.EIGHTBITspecifies the data bit value as 8 bit.TWENTYBITspecifies the data bit value as 20 bit.
errortype
property
¶
errortype: SearchSearchItemTriggerABusBPsifiveErrortype
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:ERRORTYPe command.
Description
- This command sets or queries the error type for an PSI5 bus. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:ERRORTYPe?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:ERRORTYPe?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:ERRORTYPe valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:ERRORTYPe {ANY|PARity|CRC|RESPONSECODe}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:ERRORTYPe?
Info
ANYspecifies the error type value as any. This is the default value.PARityspecifies the error type value as parity.CRCspecifies the error type value as CRC.RESPONSECODespecifies the error type value as response code.
functioncodetype
property
¶
functioncodetype: SearchSearchItemTriggerABusBPsifiveFunctioncodetype
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:FUNCTIONCODETYPe command.
Description
- This command sets or queries the binary data string used for PSI5 triggering if the trigger condition is a Function Code. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:FUNCTIONCODETYPe?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:FUNCTIONCODETYPe?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:FUNCTIONCODETYPe valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:FUNCTIONCODETYPe <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:FUNCTIONCODETYPe?
Info
<QString>specifies the value of the data string. The valid characters are 0, 1, and X for values in binary format; and A-F, 0-9, and X for values in hexadecimal format.
register
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:REGister command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:REGister?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:REGister?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.address: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:REGister:ADDResscommand tree.
registeraddress
property
¶
registeraddress: SearchSearchItemTriggerABusBPsifiveRegisteraddress
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:REGISTERADDRess command.
Description
- This command sets or queries the register address for PSI5 bus. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:REGISTERADDRess?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:REGISTERADDRess?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:REGISTERADDRess valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:REGISTERADDRess {TWOBIT|SIXBIT|EIGHTBIT}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:REGISTERADDRess?
Info
TWOBITspecifies the register address value as 2 bit. This is the default value.SIXBITspecifies the register address value as 6 bit.EIGHTBITspecifies the register address value as 8 bit.
sensor
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:SENSor command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:SENSor?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:SENSor?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.address: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:SENSor:ADDResscommand tree.
sensorstatus
property
¶
sensorstatus: SearchSearchItemTriggerABusBPsifiveSensorstatus
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:SENSORSTATus command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:SENSORSTATus?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:SENSORSTATus?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.type: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:SENSORSTATus:TYPecommand.
status
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:STATus command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:STATus?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:STATus?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:STATus:VALuecommand.
SearchSearchItemTriggerABusBPsifiveBlockdata
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:BLOCKDATa command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:BLOCKDATa?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:BLOCKDATa?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:BLOCKDATa:VALuecommand.
value
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:BLOCKDATa:VALue command.
Description
- This command sets or queries the binary block data string used for PSI5 triggering if the trigger condition is block id.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:BLOCKDATa:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:BLOCKDATa:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:BLOCKDATa:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:BLOCKDATa:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:BLOCKDATa:VALue?
Info
<QString>specifies the binary block data string.
SearchSearchItemTriggerABusBPsifiveBlockdataValue
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:BLOCKDATa:VALue command.
Description
- This command sets or queries the binary block data string used for PSI5 triggering if the trigger condition is block id.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:BLOCKDATa:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:BLOCKDATa:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:BLOCKDATa:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:BLOCKDATa:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:BLOCKDATa:VALue?
Info
<QString>specifies the binary block data string.
SearchSearchItemTriggerABusBPsifiveCondition
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:CONDition command.
Description
- This command sets or queries the trigger condition for an PSI5 bus. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:CONDition?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:CONDition?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:CONDition valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:CONDition {STARt|STATus|DATa|BLOCkid|SENSORSTATus|ERRors|STARTBIT|FUNCTIONCODe|ECUDATa|SENSORADDRess|REGISTERADDRess|CRCERRor}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:CONDition?
Info
STARtspecifies the search condition as Start. This is the default trigger.STATusspecifies the search condition as Status.DATaspecifies the search condition as Data.BLOCkidspecifies the search condition as Block ID.SENSORSTATusspecifies the search condition as Sensor Status.ERRorsspecifies the search condition as Errors.STARTBITspecifies the search condition as Start Bit.FUNCTIONCODespecifies the search condition as Function Code.ECUDATaspecifies the search condition as ECU Data.SENSORADDRessspecifies the search condition as Sensor Address.REGISTERADDRessspecifies the search condition as Register Address.CRCERRorspecifies the search condition as CRC Error.
SearchSearchItemTriggerABusBPsifiveData
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:DATa command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:DATa?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:DATa?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.ecu: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:DATa:ECUcommand tree..region: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:DATa:REGioncommand tree.
ecu
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:DATa:ECU command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:DATa:ECU?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:DATa:ECU?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.sensor: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:DATa:ECU:SENSorcommand tree.
region
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:DATa:REGion command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:DATa:REGion?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:DATa:REGion?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.a: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:DATa:REGion:Acommand tree..b: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:DATa:REGion:Bcommand tree.
SearchSearchItemTriggerABusBPsifiveDataEcu
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:DATa:ECU command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:DATa:ECU?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:DATa:ECU?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.sensor: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:DATa:ECU:SENSorcommand tree.
sensor
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:DATa:ECU:SENSor command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:DATa:ECU:SENSor?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:DATa:ECU:SENSor?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:DATa:ECU:SENSor:VALuecommand.
SearchSearchItemTriggerABusBPsifiveDataEcuSensor
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:DATa:ECU:SENSor command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:DATa:ECU:SENSor?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:DATa:ECU:SENSor?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:DATa:ECU:SENSor:VALuecommand.
value
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:DATa:ECU:SENSor:VALue command.
Description
- This command sets or queries the binary Data string used for PSI5 triggering if the trigger condition is Data in ECU to Sensor communication mode. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:DATa:ECU:SENSor:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:DATa:ECU:SENSor:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:DATa:ECU:SENSor:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:DATa:ECU:SENSor:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:DATa:ECU:SENSor:VALue?
Info
<QString>specifies the value of the data string. The valid characters are 0, 1, and X for values in binary format; and A-F, 0-9, and X for values in hexadecimal format.
SearchSearchItemTriggerABusBPsifiveDataEcuSensorValue
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:DATa:ECU:SENSor:VALue command.
Description
- This command sets or queries the binary Data string used for PSI5 triggering if the trigger condition is Data in ECU to Sensor communication mode. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:DATa:ECU:SENSor:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:DATa:ECU:SENSor:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:DATa:ECU:SENSor:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:DATa:ECU:SENSor:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:DATa:ECU:SENSor:VALue?
Info
<QString>specifies the value of the data string. The valid characters are 0, 1, and X for values in binary format; and A-F, 0-9, and X for values in hexadecimal format.
SearchSearchItemTriggerABusBPsifiveDataRegion
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:DATa:REGion command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:DATa:REGion?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:DATa:REGion?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.a: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:DATa:REGion:Acommand tree..b: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:DATa:REGion:Bcommand tree.
a
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:DATa:REGion:A command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:DATa:REGion:A?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:DATa:REGion:A?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:DATa:REGion:A:VALuecommand.
b
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:DATa:REGion:B command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:DATa:REGion:B?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:DATa:REGion:B?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:DATa:REGion:B:VALuecommand.
SearchSearchItemTriggerABusBPsifiveDataRegionA
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:DATa:REGion:A command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:DATa:REGion:A?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:DATa:REGion:A?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:DATa:REGion:A:VALuecommand.
value
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:DATa:REGion:A:VALue command.
Description
- This command sets or queries the binary data string used for PSI5 triggering if the trigger condition is data region A. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:DATa:REGion:A:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:DATa:REGion:A:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:DATa:REGion:A:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:DATa:REGion:A:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:DATa:REGion:A:VALue?
Info
<QString>specifies the value of the data string. The valid characters are 0, 1, and X for values in binary format; and A-F, 0-9, and X for values in hexadecimal format.
SearchSearchItemTriggerABusBPsifiveDataRegionAValue
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:DATa:REGion:A:VALue command.
Description
- This command sets or queries the binary data string used for PSI5 triggering if the trigger condition is data region A. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:DATa:REGion:A:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:DATa:REGion:A:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:DATa:REGion:A:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:DATa:REGion:A:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:DATa:REGion:A:VALue?
Info
<QString>specifies the value of the data string. The valid characters are 0, 1, and X for values in binary format; and A-F, 0-9, and X for values in hexadecimal format.
SearchSearchItemTriggerABusBPsifiveDataRegionB
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:DATa:REGion:B command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:DATa:REGion:B?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:DATa:REGion:B?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:DATa:REGion:B:VALuecommand.
value
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:DATa:REGion:B:VALue command.
Description
- This command sets or queries the binary data string used for PSI5 triggering if the trigger condition is data region B. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:DATa:REGion:B:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:DATa:REGion:B:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:DATa:REGion:B:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:DATa:REGion:B:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:DATa:REGion:B:VALue?
Info
<QString>specifies the value of the data string. The valid characters are 0, 1, and X for values in binary format; and A-F, 0-9, and X for values in hexadecimal format.
SearchSearchItemTriggerABusBPsifiveDataRegionBValue
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:DATa:REGion:B:VALue command.
Description
- This command sets or queries the binary data string used for PSI5 triggering if the trigger condition is data region B. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:DATa:REGion:B:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:DATa:REGion:B:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:DATa:REGion:B:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:DATa:REGion:B:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:DATa:REGion:B:VALue?
Info
<QString>specifies the value of the data string. The valid characters are 0, 1, and X for values in binary format; and A-F, 0-9, and X for values in hexadecimal format.
SearchSearchItemTriggerABusBPsifiveDatabits
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:DATABITs command.
Description
- This command sets or queries the binary register address string used for PSI5 triggering if the trigger condition is Data in ECU to Sensor communication mode. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:DATABITs?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:DATABITs?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:DATABITs valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:DATABITs {FOURBIT|EIGHTBIT|TWENTYBIT}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:DATABITs?
Info
FOURBITspecifies the data bit value as 4 bit.EIGHTBITspecifies the data bit value as 8 bit.TWENTYBITspecifies the data bit value as 20 bit.
SearchSearchItemTriggerABusBPsifiveErrortype
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:ERRORTYPe command.
Description
- This command sets or queries the error type for an PSI5 bus. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:ERRORTYPe?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:ERRORTYPe?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:ERRORTYPe valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:ERRORTYPe {ANY|PARity|CRC|RESPONSECODe}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:ERRORTYPe?
Info
ANYspecifies the error type value as any. This is the default value.PARityspecifies the error type value as parity.CRCspecifies the error type value as CRC.RESPONSECODespecifies the error type value as response code.
SearchSearchItemTriggerABusBPsifiveFunctioncodetype
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:FUNCTIONCODETYPe command.
Description
- This command sets or queries the binary data string used for PSI5 triggering if the trigger condition is a Function Code. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:FUNCTIONCODETYPe?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:FUNCTIONCODETYPe?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:FUNCTIONCODETYPe valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:FUNCTIONCODETYPe <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:FUNCTIONCODETYPe?
Info
<QString>specifies the value of the data string. The valid characters are 0, 1, and X for values in binary format; and A-F, 0-9, and X for values in hexadecimal format.
SearchSearchItemTriggerABusBPsifiveRegister
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:REGister command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:REGister?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:REGister?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.address: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:REGister:ADDResscommand tree.
address
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:REGister:ADDRess command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:REGister:ADDRess?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:REGister:ADDRess?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:REGister:ADDRess:VALuecommand.
SearchSearchItemTriggerABusBPsifiveRegisterAddress
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:REGister:ADDRess command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:REGister:ADDRess?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:REGister:ADDRess?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:REGister:ADDRess:VALuecommand.
value
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:REGister:ADDRess:VALue command.
Description
- This command sets or queries the binary register address string used for PSI5 triggering if the trigger condition is Register Address. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:REGister:ADDRess:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:REGister:ADDRess:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:REGister:ADDRess:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:REGister:ADDRess:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:REGister:ADDRess:VALue?
Info
<QString>specifies the value of the data string. The valid characters are 0, 1, and X for values in binary format; and A-F, 0-9, and X for values in hexadecimal format.
SearchSearchItemTriggerABusBPsifiveRegisterAddressValue
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:REGister:ADDRess:VALue command.
Description
- This command sets or queries the binary register address string used for PSI5 triggering if the trigger condition is Register Address. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:REGister:ADDRess:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:REGister:ADDRess:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:REGister:ADDRess:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:REGister:ADDRess:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:REGister:ADDRess:VALue?
Info
<QString>specifies the value of the data string. The valid characters are 0, 1, and X for values in binary format; and A-F, 0-9, and X for values in hexadecimal format.
SearchSearchItemTriggerABusBPsifiveRegisteraddress
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:REGISTERADDRess command.
Description
- This command sets or queries the register address for PSI5 bus. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:REGISTERADDRess?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:REGISTERADDRess?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:REGISTERADDRess valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:REGISTERADDRess {TWOBIT|SIXBIT|EIGHTBIT}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:REGISTERADDRess?
Info
TWOBITspecifies the register address value as 2 bit. This is the default value.SIXBITspecifies the register address value as 6 bit.EIGHTBITspecifies the register address value as 8 bit.
SearchSearchItemTriggerABusBPsifiveSensor
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:SENSor command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:SENSor?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:SENSor?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.address: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:SENSor:ADDResscommand tree.
address
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:SENSor:ADDRess command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:SENSor:ADDRess?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:SENSor:ADDRess?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:SENSor:ADDRess:VALuecommand.
SearchSearchItemTriggerABusBPsifiveSensorAddress
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:SENSor:ADDRess command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:SENSor:ADDRess?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:SENSor:ADDRess?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:SENSor:ADDRess:VALuecommand.
value
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:SENSor:ADDRess:VALue command.
Description
- This command sets or queries the binary sensor address string used for PSI5 triggering if the trigger condition is Sensor Address. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:SENSor:ADDRess:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:SENSor:ADDRess:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:SENSor:ADDRess:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:SENSor:ADDRess:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:SENSor:ADDRess:VALue?
Info
<QString>specifies the value of the data string. The valid characters are 0, 1, and X for values in binary format; and A-F, 0-9, and X for values in hexadecimal format.
SearchSearchItemTriggerABusBPsifiveSensorAddressValue
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:SENSor:ADDRess:VALue command.
Description
- This command sets or queries the binary sensor address string used for PSI5 triggering if the trigger condition is Sensor Address. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:SENSor:ADDRess:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:SENSor:ADDRess:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:SENSor:ADDRess:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:SENSor:ADDRess:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:SENSor:ADDRess:VALue?
Info
<QString>specifies the value of the data string. The valid characters are 0, 1, and X for values in binary format; and A-F, 0-9, and X for values in hexadecimal format.
SearchSearchItemTriggerABusBPsifiveSensorstatus
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:SENSORSTATus command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:SENSORSTATus?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:SENSORSTATus?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.type: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:SENSORSTATus:TYPecommand.
type
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:SENSORSTATus:TYPe command.
Description
- This command sets or queries the sensor status for PSI5 bus.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:SENSORSTATus:TYPe?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:SENSORSTATus:TYPe?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:SENSORSTATus:TYPe valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:SENSORSTATus:TYPe {READy|BUSY|DEFect|SERVICEMODe|UNLocked}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:SENSORSTATus:TYPe?
Info
READyspecifies the sensor status as ready. This is the default value.BUSYspecifies the sensor status as busy.DEFectspecifies the sensor status as defect.SERVICEMODespecifies the sensor status as service mode.UNLockedspecifies the sensor status as unlocked.
SearchSearchItemTriggerABusBPsifiveSensorstatusType
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:SENSORSTATus:TYPe command.
Description
- This command sets or queries the sensor status for PSI5 bus.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:SENSORSTATus:TYPe?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:SENSORSTATus:TYPe?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:SENSORSTATus:TYPe valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:SENSORSTATus:TYPe {READy|BUSY|DEFect|SERVICEMODe|UNLocked}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:SENSORSTATus:TYPe?
Info
READyspecifies the sensor status as ready. This is the default value.BUSYspecifies the sensor status as busy.DEFectspecifies the sensor status as defect.SERVICEMODespecifies the sensor status as service mode.UNLockedspecifies the sensor status as unlocked.
SearchSearchItemTriggerABusBPsifiveStatus
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:STATus command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:STATus?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:STATus?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:STATus:VALuecommand.
value
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:STATus:VALue command.
Description
- This command sets or queries the binary status string used for PSI5 triggering if the trigger condition is status.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:STATus:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:STATus:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:STATus:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:STATus:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:STATus:VALue?
Info
<QString>specifies the value of the data string. The valid characters are 0, 1, and X for values in binary format; and A-F, 0-9, and X for values in hexadecimal format.
SearchSearchItemTriggerABusBPsifiveStatusValue
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:STATus:VALue command.
Description
- This command sets or queries the binary status string used for PSI5 triggering if the trigger condition is status.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:STATus:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:STATus:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:STATus:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:STATus:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B:PSIFIVe:STATus:VALue?
Info
<QString>specifies the value of the data string. The valid characters are 0, 1, and X for values in binary format; and A-F, 0-9, and X for values in hexadecimal format.
SearchSearchItemTriggerABusBS8b10b
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:B:S8B10B command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:B:S8B10B?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:B:S8B10B?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.condition: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:B:S8B10B:CONDitioncommand.
condition
property
¶
condition: SearchSearchItemTriggerABusBS8b10bCondition
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:B:S8B10B:CONDition command.
Description
- This command sets or queries the type of data search for an 8B10B bus. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:B:S8B10B:CONDition?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:B:S8B10B:CONDition?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:B:S8B10B:CONDition valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B:S8B10B:CONDition {SYMbols|ERRors}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B:S8B10B:CONDition?
Info
Search<x>is the number of the search.SYMbolsspecifies the search condition as data or control.ERRorsspecifies the search condition as Symbol error or disparity error.
SearchSearchItemTriggerABusBS8b10bCondition
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:B:S8B10B:CONDition command.
Description
- This command sets or queries the type of data search for an 8B10B bus. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:B:S8B10B:CONDition?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:B:S8B10B:CONDition?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:B:S8B10B:CONDition valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B:S8B10B:CONDition {SYMbols|ERRors}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:B:S8B10B:CONDition?
Info
Search<x>is the number of the search.SYMbolsspecifies the search condition as data or control.ERRorsspecifies the search condition as Symbol error or disparity error.
SearchSearchItemTriggerABusCan
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CAN?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CAN?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.condition: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:CONDitioncommand..data: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATacommand tree..errtype: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:ERRTypecommand..fd: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:FDcommand tree..frametype: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:FRAMEtypecommand..identifier: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:IDentifiercommand tree.
condition
property
¶
condition: SearchSearchItemTriggerABusCanCondition
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:CONDition command.
Description
- This command sets or queries the search condition for a CAN bus. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:CONDition?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:CONDition?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:CONDition valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:CONDition {SOF|FRAMEtype|IDentifier|DATa|IDANDDATA|EOF|ERRor|FDBITS}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:CONDition?
Info
SOFspecifies the search condition for a CAN bus as start of frame.FRAMEtypespecifies the search condition for a CAN bus as frame type.IDentifierspecifies the search condition for a CAN bus as identifier.IDANDDATAspecifies the search condition for a CAN bus as ID and data.EOFspecifies the search condition for a CAN bus as end of frame.ERRorspecifies the search condition for a CAN bus as error.FDBITSspecifies the search condition for a CAN bus as FD bits.
data
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.direction: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:DIRectioncommand..offset: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:OFFSetcommand..qualifier: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:QUALifiercommand..size: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:SIZecommand..value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:VALuecommand.
errtype
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:ERRType command.
Description
- This command sets or queries the type of error condition for a CAN bus to search on. The search number is specified by x. The search condition must be set to ERRor.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:ERRType?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:ERRType?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:ERRType valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:ERRType {ACKMISS|BITSTUFFing|FORMERRor|ANYERRor}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:ERRType?
Info
ACKMISSspecifies a search based on a missing ACK field.BITSTUFFingspecifies a search based on a bit stuffing error.FORMERRorspecifies a search based on a CAN FD form error. To use this option, the CAN standard must be set to FDISO or FDNONISO.ANYERRorspecifies a search based on any error type.
fd
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:FD command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:FD?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:FD?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.brsbit: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:FD:BRSBitcommand..esibit: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:FD:ESIBitcommand.
frametype
property
¶
frametype: SearchSearchItemTriggerABusCanFrametype
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:FRAMEtype command.
Description
- This command sets or queries CAN bus trigger frame type to be used when searching on a CAN bus signal. The search condition must be set to FRAMEtype. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:FRAMEtype?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:FRAMEtype?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:FRAMEtype valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:FRAMEtype {DATa|ERRor|OVERLoad|REMote}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:FRAMEtype?
Info
DATasets the frame type to data.ERRorsets the frame type to error.OVERLoadsets the frame type to overload.REMotesets the frame type to remote.
identifier
property
¶
identifier: SearchSearchItemTriggerABusCanIdentifier
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:IDentifier command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:IDentifier?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:IDentifier?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.mode: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:IDentifier:MODecommand..value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:IDentifier:VALuecommand.
SearchSearchItemTriggerABusCanCondition
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:CONDition command.
Description
- This command sets or queries the search condition for a CAN bus. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:CONDition?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:CONDition?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:CONDition valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:CONDition {SOF|FRAMEtype|IDentifier|DATa|IDANDDATA|EOF|ERRor|FDBITS}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:CONDition?
Info
SOFspecifies the search condition for a CAN bus as start of frame.FRAMEtypespecifies the search condition for a CAN bus as frame type.IDentifierspecifies the search condition for a CAN bus as identifier.IDANDDATAspecifies the search condition for a CAN bus as ID and data.EOFspecifies the search condition for a CAN bus as end of frame.ERRorspecifies the search condition for a CAN bus as error.FDBITSspecifies the search condition for a CAN bus as FD bits.
SearchSearchItemTriggerABusCanData
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.direction: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:DIRectioncommand..offset: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:OFFSetcommand..qualifier: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:QUALifiercommand..size: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:SIZecommand..value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:VALuecommand.
direction
property
¶
direction: SearchSearchItemTriggerABusCanDataDirection
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:DIRection command.
Description
- This command specifies the CAN search type to be valid on a Read, Write, or Either condition. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:DIRection?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:DIRection?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:DIRection valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:DIRection {READ|WRITE|NOCARE}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:DIRection?
Info
READspecifies the read direction.WRITEspecifies the write direction.NOCAREspecifies either data direction.
offset
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:OFFSet command.
Description
- This command sets or queries the data offset value, in bytes, to use when searching on the CAN data field. The search number is specified by x. The search condition must be set to DATA or IDANDDATA.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:OFFSet?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:OFFSet?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:OFFSet valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:OFFSet <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:OFFSet?
Info
<NR1>is an integer whose minimum and default values are -1 (don’t care) and maximum is up to 7 (for CAN 2.0) or up to 63 (for ISO CAN FD and Non-ISO CAN FD). The maximum is dependent on the number of bytes being matched and the CAN standard selected. Its value is calculated as [Absolute Maximum] - [Data Match Size]. For CAN 2.0, the absolute maximum is 8 bytes. For ISO CAN FD and Non-ISO CAN FD, the absolute maximum is 64 bytes. The minimum data match size is 1 byte, which produces the ranges listed above. Increasing the data match size above 1 byte will adjust the range of valid data offset values accordingly.
qualifier
property
¶
qualifier: SearchSearchItemTriggerABusCanDataQualifier
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:QUALifier command.
Description
- This command sets or queries the CAN bus trigger data qualifier to be used when searching on a CAN bus signal. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:QUALifier?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:QUALifier?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:QUALifier valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:QUALifier {EQUal|LESSEQual|MOREEQua|UNEQual|LESSthan|MOREthan}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:QUALifier?
Info
EQUalsets the data qualifier to equal.LESSEQualsets the data qualifier to less equal.MOREEQuasets the data qualifier to more equal.UNEQualsets the data qualifier to unequal.LESSthansets the data qualifier to less than.MOREthansets the data qualifier to more than.
size
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:SIZe command.
Description
- This command sets or queries the length of the data string, in bytes, to be used when searching on a CAN bus signal. The search condition must be set to IDANDDATA or DATA. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:SIZe?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:SIZe?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:SIZe valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:SIZe <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:SIZe?
Info
<NR1>specifies the data size.
value
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:VALue command.
Description
- This command sets or queries the binary data value to be used when searching on a CAN bus signal. The search condition must be set to IDANDDATA OR DATA.
Usage
- Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:VALue <QString>
Info
<QString>
SearchSearchItemTriggerABusCanDataDirection
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:DIRection command.
Description
- This command specifies the CAN search type to be valid on a Read, Write, or Either condition. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:DIRection?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:DIRection?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:DIRection valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:DIRection {READ|WRITE|NOCARE}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:DIRection?
Info
READspecifies the read direction.WRITEspecifies the write direction.NOCAREspecifies either data direction.
SearchSearchItemTriggerABusCanDataOffset
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:OFFSet command.
Description
- This command sets or queries the data offset value, in bytes, to use when searching on the CAN data field. The search number is specified by x. The search condition must be set to DATA or IDANDDATA.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:OFFSet?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:OFFSet?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:OFFSet valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:OFFSet <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:OFFSet?
Info
<NR1>is an integer whose minimum and default values are -1 (don’t care) and maximum is up to 7 (for CAN 2.0) or up to 63 (for ISO CAN FD and Non-ISO CAN FD). The maximum is dependent on the number of bytes being matched and the CAN standard selected. Its value is calculated as [Absolute Maximum] - [Data Match Size]. For CAN 2.0, the absolute maximum is 8 bytes. For ISO CAN FD and Non-ISO CAN FD, the absolute maximum is 64 bytes. The minimum data match size is 1 byte, which produces the ranges listed above. Increasing the data match size above 1 byte will adjust the range of valid data offset values accordingly.
SearchSearchItemTriggerABusCanDataQualifier
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:QUALifier command.
Description
- This command sets or queries the CAN bus trigger data qualifier to be used when searching on a CAN bus signal. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:QUALifier?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:QUALifier?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:QUALifier valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:QUALifier {EQUal|LESSEQual|MOREEQua|UNEQual|LESSthan|MOREthan}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:QUALifier?
Info
EQUalsets the data qualifier to equal.LESSEQualsets the data qualifier to less equal.MOREEQuasets the data qualifier to more equal.UNEQualsets the data qualifier to unequal.LESSthansets the data qualifier to less than.MOREthansets the data qualifier to more than.
SearchSearchItemTriggerABusCanDataSize
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:SIZe command.
Description
- This command sets or queries the length of the data string, in bytes, to be used when searching on a CAN bus signal. The search condition must be set to IDANDDATA or DATA. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:SIZe?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:SIZe?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:SIZe valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:SIZe <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:SIZe?
Info
<NR1>specifies the data size.
SearchSearchItemTriggerABusCanDataValue
¶
Bases: SCPICmdWrite
The SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:VALue command.
Description
- This command sets or queries the binary data value to be used when searching on a CAN bus signal. The search condition must be set to IDANDDATA OR DATA.
Usage
- Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:VALue <QString>
Info
<QString>
SearchSearchItemTriggerABusCanErrtype
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:ERRType command.
Description
- This command sets or queries the type of error condition for a CAN bus to search on. The search number is specified by x. The search condition must be set to ERRor.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:ERRType?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:ERRType?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:ERRType valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:ERRType {ACKMISS|BITSTUFFing|FORMERRor|ANYERRor}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:ERRType?
Info
ACKMISSspecifies a search based on a missing ACK field.BITSTUFFingspecifies a search based on a bit stuffing error.FORMERRorspecifies a search based on a CAN FD form error. To use this option, the CAN standard must be set to FDISO or FDNONISO.ANYERRorspecifies a search based on any error type.
SearchSearchItemTriggerABusCanFd
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:FD command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:FD?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:FD?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.brsbit: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:FD:BRSBitcommand..esibit: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:FD:ESIBitcommand.
brsbit
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:FD:BRSBit command.
Description
- This command sets or queries the value of the bit rate switch bit (BRS bit) for a CAN bus to search on. The search number is specified by x. The search condition must be set to FDBITS, and the CAN standard must be FDISO or FDNONISO.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:FD:BRSBit?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:FD:BRSBit?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:FD:BRSBit valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:FD:BRSBit {ONE|ZERo|NOCARE}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:FD:BRSBit?
Info
ONEfilters CAN FD packets to only match those where the BRS bit has a value of 1 (fast data enabled).ZERofilters CAN FD packets to only match those where the BRS bit has a value of 0 (fast data disabled).NOCAREdisables filtering of CAN FD packets on the BRS bit.
esibit
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:FD:ESIBit command.
Description
- This command sets or queries the value of the error state indicator bit (ESI bit) for a CAN bus to search on. The search number is specified by x. The search condition must be set to FDBITS, and the CAN standard must be FDISO or FDNONISO.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:FD:ESIBit?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:FD:ESIBit?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:FD:ESIBit valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:FD:ESIBit {ONE|ZERo|NOCARE}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:FD:ESIBit?
Info
ONEfilters CAN FD packets to only match those where the ESI bit has a value of 1 (recessive).ZERofilters CAN FD packets to only match those where the ESI bit has a value of 0 (dominant).NOCAREdisables filtering of CAN FD packets on the ESI bit.
SearchSearchItemTriggerABusCanFdBrsbit
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:FD:BRSBit command.
Description
- This command sets or queries the value of the bit rate switch bit (BRS bit) for a CAN bus to search on. The search number is specified by x. The search condition must be set to FDBITS, and the CAN standard must be FDISO or FDNONISO.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:FD:BRSBit?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:FD:BRSBit?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:FD:BRSBit valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:FD:BRSBit {ONE|ZERo|NOCARE}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:FD:BRSBit?
Info
ONEfilters CAN FD packets to only match those where the BRS bit has a value of 1 (fast data enabled).ZERofilters CAN FD packets to only match those where the BRS bit has a value of 0 (fast data disabled).NOCAREdisables filtering of CAN FD packets on the BRS bit.
SearchSearchItemTriggerABusCanFdEsibit
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:FD:ESIBit command.
Description
- This command sets or queries the value of the error state indicator bit (ESI bit) for a CAN bus to search on. The search number is specified by x. The search condition must be set to FDBITS, and the CAN standard must be FDISO or FDNONISO.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:FD:ESIBit?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:FD:ESIBit?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:FD:ESIBit valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:FD:ESIBit {ONE|ZERo|NOCARE}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:FD:ESIBit?
Info
ONEfilters CAN FD packets to only match those where the ESI bit has a value of 1 (recessive).ZERofilters CAN FD packets to only match those where the ESI bit has a value of 0 (dominant).NOCAREdisables filtering of CAN FD packets on the ESI bit.
SearchSearchItemTriggerABusCanFrametype
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:FRAMEtype command.
Description
- This command sets or queries CAN bus trigger frame type to be used when searching on a CAN bus signal. The search condition must be set to FRAMEtype. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:FRAMEtype?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:FRAMEtype?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:FRAMEtype valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:FRAMEtype {DATa|ERRor|OVERLoad|REMote}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:FRAMEtype?
Info
DATasets the frame type to data.ERRorsets the frame type to error.OVERLoadsets the frame type to overload.REMotesets the frame type to remote.
SearchSearchItemTriggerABusCanIdentifier
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:IDentifier command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:IDentifier?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:IDentifier?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.mode: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:IDentifier:MODecommand..value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:IDentifier:VALuecommand.
mode
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:IDentifier:MODe command.
Description
- This command sets or queries the CAN bus trigger identifier (address) mode to be used when searching on a CAN bus signal. The search number is specified by x. The search condition must be set to IDANDDATA or DATA.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:IDentifier:MODe?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:IDentifier:MODe?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:IDentifier:MODe valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:IDentifier:MODe {EXTENDed|STandard}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:IDentifier:MODe?
Info
EXTENDedspecifies the extended identifier mode.STandardspecifies the standard identifier mode.
value
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:IDentifier:VALue command.
Description
- This command sets or queries CAN bus trigger identifier (address) value to be used when searching on a CAN bus signal. The search number is specified by x. The search condition must be set to IDANDDATA or DATA.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:IDentifier:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:IDentifier:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:IDentifier:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:IDentifier:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:IDentifier:VALue?
Info
<QString>is the identifier value.
SearchSearchItemTriggerABusCanIdentifierMode
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:IDentifier:MODe command.
Description
- This command sets or queries the CAN bus trigger identifier (address) mode to be used when searching on a CAN bus signal. The search number is specified by x. The search condition must be set to IDANDDATA or DATA.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:IDentifier:MODe?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:IDentifier:MODe?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:IDentifier:MODe valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:IDentifier:MODe {EXTENDed|STandard}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:IDentifier:MODe?
Info
EXTENDedspecifies the extended identifier mode.STandardspecifies the standard identifier mode.
SearchSearchItemTriggerABusCanIdentifierValue
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:IDentifier:VALue command.
Description
- This command sets or queries CAN bus trigger identifier (address) value to be used when searching on a CAN bus signal. The search number is specified by x. The search condition must be set to IDANDDATA or DATA.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:IDentifier:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:IDentifier:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:IDentifier:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:IDentifier:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:IDentifier:VALue?
Info
<QString>is the identifier value.
SearchSearchItemTriggerABusCphy
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.blue: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:BLUecommand tree..condition: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:CONDitioncommand..data: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:DATacommand tree..error: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:ERRorcommand tree..escapemode: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:ESCAPEMODecommand tree..green: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:GREencommand tree..mode: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:MODecommand tree..packets: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:PACKetscommand tree..pixel: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:PIXelcommand tree..red: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:REDcommand tree..symbol: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:SYMBolcommand tree..word: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:WORDcommand tree..wordcount: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:WORDCOUNtcommand tree..ycbcr: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:YCBCRcommand tree..yuv: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:YUVcommand tree.
blue
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:BLUe command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:BLUe?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:BLUe?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:BLUe:VALuecommand.
condition
property
¶
condition: SearchSearchItemTriggerABusCphyCondition
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:CONDition command.
Description
- This command sets or queries the trigger condition for an CPHY bus. The default trigger on condition is SOT.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:CONDition?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:CONDition?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:CONDition valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:CONDition {SOT|EOT|DATa|EOTPDATa|OPTIONALPARam|SCRambling|COMPression|PACKets|BUSTURNAROUnd|ESCAPEMODe|STop|ERRors|MODe|WORD|SYMBol}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:CONDition?
Info
SOTspecifies SOT as the field within a CPHY frame to search on.EOTspecifies EOT as the field within a CPHY frame to search on.DATaspecifies DATa as the field within a CPHY frame to search on.EOTPDATaspecifies EOTPDATa as the field within a CPHY frame to search on.OPTIONALPARamspecifies OPTIONALPARam as the field within a CPHY frame to search on.SCRamblingspecifies SCRambling as the field within a CPHY frame to search on.COMPressionspecifies COMPression as the field within a CPHY frame to search on.PACKetsspecifies PACKets as the field within a CPHY frame to search on.BUSTURNAROUndspecifies BUSTURNAROUnd as the field within a CPHY frame to search on.ESCAPEMODespecifies ESCAPEMODe as the field within a CPHY frame to search on.STopspecifies STop as the field within a CPHY frame to search on.ERRorsspecifies ERRors as the field within a CPHY frame to search on.MODespecifies MODe as the field within a CPHY frame to search on.WORDspecifies WORD as the field within a CPHY frame to search on.SYMBolspecifies SYMBol as the field within a CPHY frame to search on.
data
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:DATa command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:DATa?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:DATa?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.size: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:DATa:SIZecommand..value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:DATa:VALuecommand.
error
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:ERRor command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:ERRor?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:ERRor?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.type: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:ERRor:TYPecommand.
escapemode
property
¶
escapemode: SearchSearchItemTriggerABusCphyEscapemode
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:ESCAPEMODe command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:ESCAPEMODe?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:ESCAPEMODe?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.command: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:ESCAPEMODe:COMMandcommand.
green
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:GREen command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:GREen?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:GREen?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:GREen:VALuecommand.
mode
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:MODe command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:MODe?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:MODe?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.type: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:MODe:TYPecommand.
packets
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:PACKets command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:PACKets?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:PACKets?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.list: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:PACKets:LISTcommand..type: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:PACKets:TYPecommand.
pixel
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:PIXel command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:PIXel?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:PIXel?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.number: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:PIXel:NUMBercommand..searchoption: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:PIXel:SEARCHOPTioncommand.
red
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:RED command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:RED?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:RED?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:RED:VALuecommand.
symbol
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:SYMBol command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:SYMBol?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:SYMBol?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.size: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:SYMBol:SIZecommand..value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:SYMBol:VALuecommand.
word
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:WORD command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:WORD?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:WORD?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.size: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:WORD:SIZecommand..value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:WORD:VALuecommand.
wordcount
property
¶
wordcount: SearchSearchItemTriggerABusCphyWordcount
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:WORDCOUNt command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:WORDCOUNt?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:WORDCOUNt?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:WORDCOUNt:VALuecommand.
ycbcr
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:YCBCR command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:YCBCR?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:YCBCR?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.cb: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:YCBCR:CBcommand..cr: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:YCBCR:CRcommand..y: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:YCBCR:Ycommand.
yuv
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:YUV command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:YUV?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:YUV?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.u: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:YUV:Ucommand..v: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:YUV:Vcommand..y: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:YUV:Ycommand.
SearchSearchItemTriggerABusCphyBlue
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:BLUe command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:BLUe?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:BLUe?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:BLUe:VALuecommand.
value
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:BLUe:VALue command.
Description
- This command specifies the blue data string used for CPHY triggering if the trigger condition is on RGB packet.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:BLUe:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:BLUe:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:BLUe:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:BLUe:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:BLUe:VALue?
Info
<QString>is the identifier value. The default blue value is XXXXXXXXXX.
SearchSearchItemTriggerABusCphyBlueValue
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:BLUe:VALue command.
Description
- This command specifies the blue data string used for CPHY triggering if the trigger condition is on RGB packet.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:BLUe:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:BLUe:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:BLUe:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:BLUe:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:BLUe:VALue?
Info
<QString>is the identifier value. The default blue value is XXXXXXXXXX.
SearchSearchItemTriggerABusCphyCondition
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:CONDition command.
Description
- This command sets or queries the trigger condition for an CPHY bus. The default trigger on condition is SOT.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:CONDition?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:CONDition?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:CONDition valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:CONDition {SOT|EOT|DATa|EOTPDATa|OPTIONALPARam|SCRambling|COMPression|PACKets|BUSTURNAROUnd|ESCAPEMODe|STop|ERRors|MODe|WORD|SYMBol}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:CONDition?
Info
SOTspecifies SOT as the field within a CPHY frame to search on.EOTspecifies EOT as the field within a CPHY frame to search on.DATaspecifies DATa as the field within a CPHY frame to search on.EOTPDATaspecifies EOTPDATa as the field within a CPHY frame to search on.OPTIONALPARamspecifies OPTIONALPARam as the field within a CPHY frame to search on.SCRamblingspecifies SCRambling as the field within a CPHY frame to search on.COMPressionspecifies COMPression as the field within a CPHY frame to search on.PACKetsspecifies PACKets as the field within a CPHY frame to search on.BUSTURNAROUndspecifies BUSTURNAROUnd as the field within a CPHY frame to search on.ESCAPEMODespecifies ESCAPEMODe as the field within a CPHY frame to search on.STopspecifies STop as the field within a CPHY frame to search on.ERRorsspecifies ERRors as the field within a CPHY frame to search on.MODespecifies MODe as the field within a CPHY frame to search on.WORDspecifies WORD as the field within a CPHY frame to search on.SYMBolspecifies SYMBol as the field within a CPHY frame to search on.
SearchSearchItemTriggerABusCphyData
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:DATa command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:DATa?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:DATa?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.size: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:DATa:SIZecommand..value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:DATa:VALuecommand.
size
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:DATa:SIZe command.
Description
- This command specifies the length of the data string in bytes to be used for an CPHY trigger if the trigger condition is DATA.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:DATa:SIZe?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:DATa:SIZe?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:DATa:SIZe valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:DATa:SIZe <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:DATa:SIZe?
Info
<NR1>specifies the data size. The default data size is 1 byte and otherwise ranges between 1 and 5.
value
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:DATa:VALue command.
Description
- This command specifies the binary data string used for CPHY triggering if the trigger condition is DATA.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:DATa:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:DATa:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:DATa:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:DATa:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:DATa:VALue?
Info
<QString>is the identifier value. The default value is XXXXXXXX.
SearchSearchItemTriggerABusCphyDataSize
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:DATa:SIZe command.
Description
- This command specifies the length of the data string in bytes to be used for an CPHY trigger if the trigger condition is DATA.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:DATa:SIZe?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:DATa:SIZe?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:DATa:SIZe valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:DATa:SIZe <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:DATa:SIZe?
Info
<NR1>specifies the data size. The default data size is 1 byte and otherwise ranges between 1 and 5.
SearchSearchItemTriggerABusCphyDataValue
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:DATa:VALue command.
Description
- This command specifies the binary data string used for CPHY triggering if the trigger condition is DATA.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:DATa:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:DATa:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:DATa:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:DATa:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:DATa:VALue?
Info
<QString>is the identifier value. The default value is XXXXXXXX.
SearchSearchItemTriggerABusCphyError
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:ERRor command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:ERRor?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:ERRor?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.type: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:ERRor:TYPecommand.
type
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:ERRor:TYPe command.
Description
- This command sets or queries the error type for CPHY bus. The default error type condition is ANY.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:ERRor:TYPe?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:ERRor:TYPe?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:ERRor:TYPe valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:ERRor:TYPe {ANY|ECC|CRC}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:ERRor:TYPe?
Info
ANYspecifies ANY as the field within a CPHY frame to search on.ECCspecifies ECC as the field within a CPHY frame to search on.CRCspecifies CRC as the field within a CPHY frame to search on.
SearchSearchItemTriggerABusCphyErrorType
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:ERRor:TYPe command.
Description
- This command sets or queries the error type for CPHY bus. The default error type condition is ANY.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:ERRor:TYPe?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:ERRor:TYPe?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:ERRor:TYPe valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:ERRor:TYPe {ANY|ECC|CRC}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:ERRor:TYPe?
Info
ANYspecifies ANY as the field within a CPHY frame to search on.ECCspecifies ECC as the field within a CPHY frame to search on.CRCspecifies CRC as the field within a CPHY frame to search on.
SearchSearchItemTriggerABusCphyEscapemode
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:ESCAPEMODe command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:ESCAPEMODe?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:ESCAPEMODe?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.command: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:ESCAPEMODe:COMMandcommand.
command
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:ESCAPEMODe:COMMand command.
Description
- This command sets or queries the escape mode command type for CPHY bus..
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:ESCAPEMODe:COMMand?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:ESCAPEMODe:COMMand?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:ESCAPEMODe:COMMand valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:ESCAPEMODe:COMMand {LPDT|ULPS|RESETTRIGger|ANY}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:ESCAPEMODe:COMMand?
Info
LPDTspecifies LPDT as the field within a CPHY frame to search on.ULPSspecifies ULPS as the field within a CPHY frame to search on.RESETTRIGgerspecifies RESETTRIGger as the field within a CPHY frame to search on.ANYspecifies ANY as the field within a CPHY frame to search on. ANY is the default value.
SearchSearchItemTriggerABusCphyEscapemodeCommand
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:ESCAPEMODe:COMMand command.
Description
- This command sets or queries the escape mode command type for CPHY bus..
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:ESCAPEMODe:COMMand?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:ESCAPEMODe:COMMand?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:ESCAPEMODe:COMMand valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:ESCAPEMODe:COMMand {LPDT|ULPS|RESETTRIGger|ANY}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:ESCAPEMODe:COMMand?
Info
LPDTspecifies LPDT as the field within a CPHY frame to search on.ULPSspecifies ULPS as the field within a CPHY frame to search on.RESETTRIGgerspecifies RESETTRIGger as the field within a CPHY frame to search on.ANYspecifies ANY as the field within a CPHY frame to search on. ANY is the default value.
SearchSearchItemTriggerABusCphyGreen
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:GREen command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:GREen?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:GREen?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:GREen:VALuecommand.
value
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:GREen:VALue command.
Description
- This command specifies the green data string used for CPHY triggering if the trigger condition is on RGB packet.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:GREen:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:GREen:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:GREen:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:GREen:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:GREen:VALue?
Info
<QString>is the identifier value. The default green value is XXXXXXXXXX.
SearchSearchItemTriggerABusCphyGreenValue
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:GREen:VALue command.
Description
- This command specifies the green data string used for CPHY triggering if the trigger condition is on RGB packet.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:GREen:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:GREen:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:GREen:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:GREen:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:GREen:VALue?
Info
<QString>is the identifier value. The default green value is XXXXXXXXXX.
SearchSearchItemTriggerABusCphyMode
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:MODe command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:MODe?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:MODe?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.type: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:MODe:TYPecommand.
type
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:MODe:TYPe command.
Description
- This command sets or queries the mode type for CPHY bus.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:MODe:TYPe?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:MODe:TYPe?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:MODe:TYPe valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:MODe:TYPe {HS|LP}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:MODe:TYPe?
Info
HSspecifies HS as the mode within a CPHY frame to search on. HS is default mode type condition.LPspecifies LP as the mode within a CPHY frame to search on.
SearchSearchItemTriggerABusCphyModeType
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:MODe:TYPe command.
Description
- This command sets or queries the mode type for CPHY bus.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:MODe:TYPe?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:MODe:TYPe?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:MODe:TYPe valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:MODe:TYPe {HS|LP}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:MODe:TYPe?
Info
HSspecifies HS as the mode within a CPHY frame to search on. HS is default mode type condition.LPspecifies LP as the mode within a CPHY frame to search on.
SearchSearchItemTriggerABusCphyPackets
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:PACKets command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:PACKets?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:PACKets?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.list: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:PACKets:LISTcommand..type: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:PACKets:TYPecommand.
list
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:PACKets:LIST command.
Description
- This command sets or queries the packet list for CPHY bus. The default packet list condition is VSYNCSTART.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:PACKets:LIST?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:PACKets:LIST?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:PACKets:LIST valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:PACKets:LIST {VSYNCSTART|VSYNCEND|HSYNCSTART|HSYNCEND|EOTP|COLOROFF|COLORON|SHUTDOWN|TURNON|GSW|GR|COMPRESSION|SCRAMBLING|EXECUTEQUEue|DCSSW|DCSR|GLONGWRITE|DSINULL|DSIBLANk|MAXRETSIZE|DCSGLONGWRITE|PICPARameter|COMPRESSEDPSTReam|PPS101010|PPS121212|PPS565|PPS666|LPS666|PPS888|YCBCR24|LPYCBCR24|YCBCR16|YCBCR12|ACKNowledge|ERRORREPort|GSRR|GLONGREAD|DCSLONGREAD|DCSSRR|FRAMESTARt|FRAMEEND|LINESTARt|LINEEND|GSP|CSINULL|CSIBLANk|EMBEDDED|USEREIGHTB|RGB565|RGB555|RGB444|RGB666|RAW6|RAW7|RAW8|RAW10|RAW12|RAW14|RAW16|RAW20|RGB888|YUV420L8|YUV8BIT|YUV422B10|YUV420B10}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:PACKets:LIST?
Info
VSYNCSTARTspecifies VSYNCSTART as the packet within CPHY frame to search on.VSYNCENDspecifies VSYNCEND as the packet within CPHY frame to search on.HSYNCSTARTspecifies HSYNCSTART as the packet within CPHY frame to search on.HSYNCENDspecifies HSYNCEND as the packet within CPHY frame to search on.EOTPspecifies EOTP as the packet within CPHY frame to search on.COLOROFFspecifies COLOROFF as the packet within CPHY frame to search on.COLORONspecifies COLORON as the packet within CPHY frame to search on.SHUTDOWNspecifies SHUTDOWN as the packet within CPHY frame to search on.TURNONspecifies TURNON as the packet within CPHY frame to search on.GSWspecifies GSW as the packet within CPHY frame to search on.GRspecifies GR as the packet within CPHY frame to search on.COMPRESSIONspecifies COMPRESSION as the packet within CPHY frame to search on.SCRAMBLINGspecifies SCRAMBLING as the packet within CPHY frame to search on.EXECUTEQUEuespecifies EXECUTEQUEue as the packet within CPHY frame to search on.DCSSWspecifies DCSSW as the packet within CPHY frame to search on.DCSRspecifies DCSR as the packet within CPHY frame to search on.GLONGWRITEspecifies GLONGWRITE as the packet within CPHY frame to search on.DSINULLspecifies DSINULL as the packet within CPHY frame to search on.DSIBLANkspecifies DSIBLANk as the packet within CPHY frame to search on.MAXRETSIZEspecifies MAXRETSIZE as the packet within CPHY frame to search on.DCSGLONGWRITEspecifies DCSGLONGWRITE as the packet within CPHY frame to search on.PICPARameterspecifies PICPARameter as the packet within CPHY frame to search on.COMPRESSEDPSTReamspecifies COMPRESSEDPSTReam as the packet within CPHY frame to search on.PPS101010specifies PPS101010 as the packet within CPHY frame to search on.PPS121212specifies PPS121212 as the packet within CPHY frame to search on.PPS565specifies PPS565 as the packet within CPHY frame to search on.PPS666specifies PPS666 as the packet within CPHY frame to search on.LPS666specifies LPS666 as the packet within CPHY frame to search on.PPS888specifies LPS666 as the packet within CPHY frame to search on.YCBCR24specifies YCBCR24 as the packet within CPHY frame to search on.LPYCBCR24specifies LPYCBCR24 as the packet within CPHY frame to search on.YCBCR16specifies YCBCR16 as the packet within CPHY frame to search on.YCBCR12specifies YCBCR12 as the packet within CPHY frame to search on.ACKNowledgespecifies ACKNowledge as the packet within CPHY frame to search on.ERRORREPortspecifies ERRORREPort as the packet within CPHY frame to search on.GSRRspecifies GSRR as the packet within CPHY frame to search on.GLONGREADspecifies GLONGREAD as the packet within CPHY frame to search on.DCSLONGREADspecifies DCSLONGREAD as the packet within CPHY frame to search on.DCSSRRspecifies DCSSRR as the packet within CPHY frame to search on.FRAMESTARtspecifies FRAMESTARt as the packet within CPHY frame to search on.FRAMEENDspecifies FRAMEEND as the packet within CPHY frame to search on.LINESTARtspecifies LINESTARt as the packet within CPHY frame to search on.LINEENDspecifies LINEEND as the packet within CPHY frame to search on.GSPspecifies GSP as the packet within CPHY frame to search on.CSINULLspecifies CSINULL as the packet within CPHY frame to search on.CSIBLANkspecifies CSIBLANk as the packet within CPHY frame to search on.EMBEDDEDspecifies EMBEDDED as the packet within CPHY frame to search on.USEREIGHTBspecifies USEREIGHTB as the packet within CPHY frame to search on.RGB565specifies RGB565 as the packet within CPHY frame to search on.RGB555specifies RGB555 as the packet within CPHY frame to search on.RGB444specifies RGB444 as the packet within CPHY frame to search on.RGB666specifies RGB666 as the packet within CPHY frame to search on.RAW6specifies RAW6 as the packet within CPHY frame to search on.RAW7specifies RAW7 as the packet within CPHY frame to search on.RAW8specifies RAW8 as the packet within CPHY frame to search on.RAW10specifies RAW10 as the packet within CPHY frame to search on.RAW12specifies RAW12 as the packet within CPHY frame to search on.RAW14specifies RAW14 as the packet within CPHY frame to search on.RAW16specifies RAW16 as the packet within CPHY frame to search on.RAW20specifies RAW20 as the packet within CPHY frame to search on.RGB888specifies RGB888 as the packet within CPHY frame to search on.YUV420L8specifies YUV420L8 as the packet within CPHY frame to search on.YUV8BITspecifies YUV8BIT as the packet within CPHY frame to search on.YUV422B10specifies YUV422B10 as the packet within CPHY frame to search on.YUV420B10specifies YUV420B10 as the packet within CPHY frame to search on.
type
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:PACKets:TYPe command.
Description
- This command sets or queries the packet type for CPHY bus.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:PACKets:TYPe?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:PACKets:TYPe?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:PACKets:TYPe valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:PACKets:TYPe {SHORt|LONG}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:PACKets:TYPe?
Info
SHORtspecifies SHORt as the field within a CPHY frame to search on. SHORt is the default packet type condition.LONGspecifies LONG as the field within a CPHY frame to search on.
SearchSearchItemTriggerABusCphyPacketsList
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:PACKets:LIST command.
Description
- This command sets or queries the packet list for CPHY bus. The default packet list condition is VSYNCSTART.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:PACKets:LIST?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:PACKets:LIST?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:PACKets:LIST valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:PACKets:LIST {VSYNCSTART|VSYNCEND|HSYNCSTART|HSYNCEND|EOTP|COLOROFF|COLORON|SHUTDOWN|TURNON|GSW|GR|COMPRESSION|SCRAMBLING|EXECUTEQUEue|DCSSW|DCSR|GLONGWRITE|DSINULL|DSIBLANk|MAXRETSIZE|DCSGLONGWRITE|PICPARameter|COMPRESSEDPSTReam|PPS101010|PPS121212|PPS565|PPS666|LPS666|PPS888|YCBCR24|LPYCBCR24|YCBCR16|YCBCR12|ACKNowledge|ERRORREPort|GSRR|GLONGREAD|DCSLONGREAD|DCSSRR|FRAMESTARt|FRAMEEND|LINESTARt|LINEEND|GSP|CSINULL|CSIBLANk|EMBEDDED|USEREIGHTB|RGB565|RGB555|RGB444|RGB666|RAW6|RAW7|RAW8|RAW10|RAW12|RAW14|RAW16|RAW20|RGB888|YUV420L8|YUV8BIT|YUV422B10|YUV420B10}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:PACKets:LIST?
Info
VSYNCSTARTspecifies VSYNCSTART as the packet within CPHY frame to search on.VSYNCENDspecifies VSYNCEND as the packet within CPHY frame to search on.HSYNCSTARTspecifies HSYNCSTART as the packet within CPHY frame to search on.HSYNCENDspecifies HSYNCEND as the packet within CPHY frame to search on.EOTPspecifies EOTP as the packet within CPHY frame to search on.COLOROFFspecifies COLOROFF as the packet within CPHY frame to search on.COLORONspecifies COLORON as the packet within CPHY frame to search on.SHUTDOWNspecifies SHUTDOWN as the packet within CPHY frame to search on.TURNONspecifies TURNON as the packet within CPHY frame to search on.GSWspecifies GSW as the packet within CPHY frame to search on.GRspecifies GR as the packet within CPHY frame to search on.COMPRESSIONspecifies COMPRESSION as the packet within CPHY frame to search on.SCRAMBLINGspecifies SCRAMBLING as the packet within CPHY frame to search on.EXECUTEQUEuespecifies EXECUTEQUEue as the packet within CPHY frame to search on.DCSSWspecifies DCSSW as the packet within CPHY frame to search on.DCSRspecifies DCSR as the packet within CPHY frame to search on.GLONGWRITEspecifies GLONGWRITE as the packet within CPHY frame to search on.DSINULLspecifies DSINULL as the packet within CPHY frame to search on.DSIBLANkspecifies DSIBLANk as the packet within CPHY frame to search on.MAXRETSIZEspecifies MAXRETSIZE as the packet within CPHY frame to search on.DCSGLONGWRITEspecifies DCSGLONGWRITE as the packet within CPHY frame to search on.PICPARameterspecifies PICPARameter as the packet within CPHY frame to search on.COMPRESSEDPSTReamspecifies COMPRESSEDPSTReam as the packet within CPHY frame to search on.PPS101010specifies PPS101010 as the packet within CPHY frame to search on.PPS121212specifies PPS121212 as the packet within CPHY frame to search on.PPS565specifies PPS565 as the packet within CPHY frame to search on.PPS666specifies PPS666 as the packet within CPHY frame to search on.LPS666specifies LPS666 as the packet within CPHY frame to search on.PPS888specifies LPS666 as the packet within CPHY frame to search on.YCBCR24specifies YCBCR24 as the packet within CPHY frame to search on.LPYCBCR24specifies LPYCBCR24 as the packet within CPHY frame to search on.YCBCR16specifies YCBCR16 as the packet within CPHY frame to search on.YCBCR12specifies YCBCR12 as the packet within CPHY frame to search on.ACKNowledgespecifies ACKNowledge as the packet within CPHY frame to search on.ERRORREPortspecifies ERRORREPort as the packet within CPHY frame to search on.GSRRspecifies GSRR as the packet within CPHY frame to search on.GLONGREADspecifies GLONGREAD as the packet within CPHY frame to search on.DCSLONGREADspecifies DCSLONGREAD as the packet within CPHY frame to search on.DCSSRRspecifies DCSSRR as the packet within CPHY frame to search on.FRAMESTARtspecifies FRAMESTARt as the packet within CPHY frame to search on.FRAMEENDspecifies FRAMEEND as the packet within CPHY frame to search on.LINESTARtspecifies LINESTARt as the packet within CPHY frame to search on.LINEENDspecifies LINEEND as the packet within CPHY frame to search on.GSPspecifies GSP as the packet within CPHY frame to search on.CSINULLspecifies CSINULL as the packet within CPHY frame to search on.CSIBLANkspecifies CSIBLANk as the packet within CPHY frame to search on.EMBEDDEDspecifies EMBEDDED as the packet within CPHY frame to search on.USEREIGHTBspecifies USEREIGHTB as the packet within CPHY frame to search on.RGB565specifies RGB565 as the packet within CPHY frame to search on.RGB555specifies RGB555 as the packet within CPHY frame to search on.RGB444specifies RGB444 as the packet within CPHY frame to search on.RGB666specifies RGB666 as the packet within CPHY frame to search on.RAW6specifies RAW6 as the packet within CPHY frame to search on.RAW7specifies RAW7 as the packet within CPHY frame to search on.RAW8specifies RAW8 as the packet within CPHY frame to search on.RAW10specifies RAW10 as the packet within CPHY frame to search on.RAW12specifies RAW12 as the packet within CPHY frame to search on.RAW14specifies RAW14 as the packet within CPHY frame to search on.RAW16specifies RAW16 as the packet within CPHY frame to search on.RAW20specifies RAW20 as the packet within CPHY frame to search on.RGB888specifies RGB888 as the packet within CPHY frame to search on.YUV420L8specifies YUV420L8 as the packet within CPHY frame to search on.YUV8BITspecifies YUV8BIT as the packet within CPHY frame to search on.YUV422B10specifies YUV422B10 as the packet within CPHY frame to search on.YUV420B10specifies YUV420B10 as the packet within CPHY frame to search on.
SearchSearchItemTriggerABusCphyPacketsType
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:PACKets:TYPe command.
Description
- This command sets or queries the packet type for CPHY bus.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:PACKets:TYPe?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:PACKets:TYPe?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:PACKets:TYPe valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:PACKets:TYPe {SHORt|LONG}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:PACKets:TYPe?
Info
SHORtspecifies SHORt as the field within a CPHY frame to search on. SHORt is the default packet type condition.LONGspecifies LONG as the field within a CPHY frame to search on.
SearchSearchItemTriggerABusCphyPixel
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:PIXel command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:PIXel?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:PIXel?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.number: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:PIXel:NUMBercommand..searchoption: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:PIXel:SEARCHOPTioncommand.
number
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:PIXel:NUMBer command.
Description
- This command specifies the pixel number to be used for CPHY triggering if the trigger condition is on pixel number pattern. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:PIXel:NUMBer?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:PIXel:NUMBer?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:PIXel:NUMBer valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:PIXel:NUMBer <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:PIXel:NUMBer?
Info
<NR1>specifies the pixel number. The default pixel number value is 0.
searchoption
property
¶
searchoption: SearchSearchItemTriggerABusCphyPixelSearchoption
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:PIXel:SEARCHOPTion command.
Description
- This command sets or queries the search pattern type for CPHY bus. The default search pattern type value is PIXELVALue.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:PIXel:SEARCHOPTion?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:PIXel:SEARCHOPTion?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:PIXel:SEARCHOPTion valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:PIXel:SEARCHOPTion {PIXELVALue|PIXELNUMBer}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:PIXel:SEARCHOPTion?
Info
PIXELVALuespecifies PIXELVALue as the field within a CPHY frame to search on.PIXELNUMBerspecifies PIXELNUMBer as the field within a CPHY frame to search on.
SearchSearchItemTriggerABusCphyPixelNumber
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:PIXel:NUMBer command.
Description
- This command specifies the pixel number to be used for CPHY triggering if the trigger condition is on pixel number pattern. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:PIXel:NUMBer?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:PIXel:NUMBer?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:PIXel:NUMBer valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:PIXel:NUMBer <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:PIXel:NUMBer?
Info
<NR1>specifies the pixel number. The default pixel number value is 0.
SearchSearchItemTriggerABusCphyPixelSearchoption
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:PIXel:SEARCHOPTion command.
Description
- This command sets or queries the search pattern type for CPHY bus. The default search pattern type value is PIXELVALue.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:PIXel:SEARCHOPTion?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:PIXel:SEARCHOPTion?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:PIXel:SEARCHOPTion valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:PIXel:SEARCHOPTion {PIXELVALue|PIXELNUMBer}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:PIXel:SEARCHOPTion?
Info
PIXELVALuespecifies PIXELVALue as the field within a CPHY frame to search on.PIXELNUMBerspecifies PIXELNUMBer as the field within a CPHY frame to search on.
SearchSearchItemTriggerABusCphyRed
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:RED command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:RED?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:RED?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:RED:VALuecommand.
value
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:RED:VALue command.
Description
- This command specifies the red data string used for CPHY triggering if the trigger condition is on RGB packet.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:RED:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:RED:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:RED:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:RED:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:RED:VALue?
Info
<QString>is the identifier value. The default red value is XXXXXXXXXX.
SearchSearchItemTriggerABusCphyRedValue
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:RED:VALue command.
Description
- This command specifies the red data string used for CPHY triggering if the trigger condition is on RGB packet.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:RED:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:RED:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:RED:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:RED:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:RED:VALue?
Info
<QString>is the identifier value. The default red value is XXXXXXXXXX.
SearchSearchItemTriggerABusCphySymbol
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:SYMBol command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:SYMBol?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:SYMBol?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.size: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:SYMBol:SIZecommand..value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:SYMBol:VALuecommand.
size
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:SYMBol:SIZe command.
Description
- This command specifies the length of the data string in bytes to be used for an CPHY trigger if the trigger condition is SYMBol. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:SYMBol:SIZe?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:SYMBol:SIZe?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:SYMBol:SIZe valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:SYMBol:SIZe <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:SYMBol:SIZe?
Info
<NR1>specifies the length of the data string. The default symbol size is 7 symbols and otherwise ranges between 1 and 14.
value
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:SYMBol:VALue command.
Description
- This command specifies the binary data string used for CPHY triggering if the trigger condition is SYMBol. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:SYMBol:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:SYMBol:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:SYMBol:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:SYMBol:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:SYMBol:VALue?
Info
<QString>specifies the binary data string. The default data value is XXX.
SearchSearchItemTriggerABusCphySymbolSize
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:SYMBol:SIZe command.
Description
- This command specifies the length of the data string in bytes to be used for an CPHY trigger if the trigger condition is SYMBol. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:SYMBol:SIZe?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:SYMBol:SIZe?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:SYMBol:SIZe valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:SYMBol:SIZe <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:SYMBol:SIZe?
Info
<NR1>specifies the length of the data string. The default symbol size is 7 symbols and otherwise ranges between 1 and 14.
SearchSearchItemTriggerABusCphySymbolValue
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:SYMBol:VALue command.
Description
- This command specifies the binary data string used for CPHY triggering if the trigger condition is SYMBol. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:SYMBol:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:SYMBol:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:SYMBol:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:SYMBol:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:SYMBol:VALue?
Info
<QString>specifies the binary data string. The default data value is XXX.
SearchSearchItemTriggerABusCphyWord
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:WORD command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:WORD?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:WORD?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.size: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:WORD:SIZecommand..value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:WORD:VALuecommand.
size
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:WORD:SIZe command.
Description
- This command specifies the length of the word string in bytes to be used for an CPHY trigger if the trigger condition is WORD. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:WORD:SIZe?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:WORD:SIZe?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:WORD:SIZe valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:WORD:SIZe <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:WORD:SIZe?
Info
<NR1>specifies the length of the data string. The default word size is 1 byte and otherwise ranges between 1 and 5.
value
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:WORD:VALue command.
Description
- This command specifies the binary data string used for CPHY triggering if the trigger condition is Word. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:WORD:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:WORD:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:WORD:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:WORD:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:WORD:VALue?
Info
<QString>specifies the binary data string. The default data value is XXXXXXXXXXXXXXXX.
SearchSearchItemTriggerABusCphyWordSize
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:WORD:SIZe command.
Description
- This command specifies the length of the word string in bytes to be used for an CPHY trigger if the trigger condition is WORD. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:WORD:SIZe?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:WORD:SIZe?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:WORD:SIZe valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:WORD:SIZe <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:WORD:SIZe?
Info
<NR1>specifies the length of the data string. The default word size is 1 byte and otherwise ranges between 1 and 5.
SearchSearchItemTriggerABusCphyWordValue
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:WORD:VALue command.
Description
- This command specifies the binary data string used for CPHY triggering if the trigger condition is Word. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:WORD:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:WORD:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:WORD:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:WORD:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:WORD:VALue?
Info
<QString>specifies the binary data string. The default data value is XXXXXXXXXXXXXXXX.
SearchSearchItemTriggerABusCphyWordcount
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:WORDCOUNt command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:WORDCOUNt?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:WORDCOUNt?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:WORDCOUNt:VALuecommand.
value
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:WORDCOUNt:VALue command.
Description
- This command specifies the word count data string used for CPHY triggering if the trigger condition is on any rgb/ycbcr/yuv packet. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:WORDCOUNt:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:WORDCOUNt:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:WORDCOUNt:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:WORDCOUNt:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:WORDCOUNt:VALue?
Info
<QString>specifies the word count data string. The default data value is XXXXXXXXXXXXXXXX.
SearchSearchItemTriggerABusCphyWordcountValue
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:WORDCOUNt:VALue command.
Description
- This command specifies the word count data string used for CPHY triggering if the trigger condition is on any rgb/ycbcr/yuv packet. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:WORDCOUNt:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:WORDCOUNt:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:WORDCOUNt:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:WORDCOUNt:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:WORDCOUNt:VALue?
Info
<QString>specifies the word count data string. The default data value is XXXXXXXXXXXXXXXX.
SearchSearchItemTriggerABusCphyYcbcr
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:YCBCR command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:YCBCR?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:YCBCR?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.cb: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:YCBCR:CBcommand..cr: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:YCBCR:CRcommand..y: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:YCBCR:Ycommand.
cb
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:YCBCR:CB command.
Description
- This command specifies the Cb data string used for CPHY triggering if the trigger condition is on YCbCr packet. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:YCBCR:CB?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:YCBCR:CB?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:YCBCR:CB valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:YCBCR:CB <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:YCBCR:CB?
Info
<QString>is the identifier value. The default YCBCR packets CB value is XXXXXXXXXX.
cr
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:YCBCR:CR command.
Description
- This command specifies the Cr data string used for CPHY triggering if the trigger condition is on YCbCr packet. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:YCBCR:CR?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:YCBCR:CR?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:YCBCR:CR valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:YCBCR:CR <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:YCBCR:CR?
Info
<QString>is the identifier value. The default YCBCR packets CR value is XXXXXXXXXX.
y
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:YCBCR:Y command.
Description
- This command specifies the Y data string used for CPHY triggering if the trigger condition is on YCbCr packet. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:YCBCR:Y?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:YCBCR:Y?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:YCBCR:Y valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:YCBCR:Y <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:YCBCR:Y?
Info
<QString>is the identifier value. The default YCBCR packets Y value is XXXXXXXXXX.
SearchSearchItemTriggerABusCphyYcbcrCb
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:YCBCR:CB command.
Description
- This command specifies the Cb data string used for CPHY triggering if the trigger condition is on YCbCr packet. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:YCBCR:CB?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:YCBCR:CB?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:YCBCR:CB valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:YCBCR:CB <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:YCBCR:CB?
Info
<QString>is the identifier value. The default YCBCR packets CB value is XXXXXXXXXX.
SearchSearchItemTriggerABusCphyYcbcrCr
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:YCBCR:CR command.
Description
- This command specifies the Cr data string used for CPHY triggering if the trigger condition is on YCbCr packet. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:YCBCR:CR?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:YCBCR:CR?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:YCBCR:CR valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:YCBCR:CR <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:YCBCR:CR?
Info
<QString>is the identifier value. The default YCBCR packets CR value is XXXXXXXXXX.
SearchSearchItemTriggerABusCphyYcbcrY
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:YCBCR:Y command.
Description
- This command specifies the Y data string used for CPHY triggering if the trigger condition is on YCbCr packet. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:YCBCR:Y?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:YCBCR:Y?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:YCBCR:Y valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:YCBCR:Y <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:YCBCR:Y?
Info
<QString>is the identifier value. The default YCBCR packets Y value is XXXXXXXXXX.
SearchSearchItemTriggerABusCphyYuv
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:YUV command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:YUV?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:YUV?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.u: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:YUV:Ucommand..v: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:YUV:Vcommand..y: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:YUV:Ycommand.
u
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:YUV:U command.
Description
- This command specifies the U data string used for CPHY triggering if the trigger condition is on YUV packet. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:YUV:U?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:YUV:U?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:YUV:U valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:YUV:U <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:YUV:U?
Info
<QString>is the identifier value. The default YUV packets U value is XXXXXXXXXX.
v
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:YUV:V command.
Description
- This command specifies the V data string used for CPHY triggering if the trigger condition is on YUV packet. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:YUV:V?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:YUV:V?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:YUV:V valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:YUV:V <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:YUV:V?
Info
<QString>is the identifier value. The default YUV packets V value is XXXXXXXXXX.
y
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:YUV:Y command.
Description
- This command specifies the Y data string used for CPHY triggering if the trigger condition is on YUV packet. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:YUV:Y?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:YUV:Y?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:YUV:Y valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:YUV:Y <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:YUV:Y?
Info
<QString>is the identifier value. The default YUV packets Y value is XXXXXXXXXX.
SearchSearchItemTriggerABusCphyYuvU
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:YUV:U command.
Description
- This command specifies the U data string used for CPHY triggering if the trigger condition is on YUV packet. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:YUV:U?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:YUV:U?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:YUV:U valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:YUV:U <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:YUV:U?
Info
<QString>is the identifier value. The default YUV packets U value is XXXXXXXXXX.
SearchSearchItemTriggerABusCphyYuvV
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:YUV:V command.
Description
- This command specifies the V data string used for CPHY triggering if the trigger condition is on YUV packet. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:YUV:V?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:YUV:V?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:YUV:V valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:YUV:V <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:YUV:V?
Info
<QString>is the identifier value. The default YUV packets V value is XXXXXXXXXX.
SearchSearchItemTriggerABusCphyYuvY
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:YUV:Y command.
Description
- This command specifies the Y data string used for CPHY triggering if the trigger condition is on YUV packet. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:YUV:Y?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:YUV:Y?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:YUV:Y valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:YUV:Y <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CPHY:YUV:Y?
Info
<QString>is the identifier value. The default YUV packets Y value is XXXXXXXXXX.
SearchSearchItemTriggerABusCxpi
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.condition: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:CONDitioncommand..counter: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:COUNtercommand tree..data: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:DATacommand tree..dlc: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:DLCcommand tree..error: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:ERRORcommand tree..extdlc: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:EXTDLCcommand tree..frameid: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:FRAMEIDcommand tree..frame: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:FRAMecommand tree..netmn: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:NETMNcommand tree.
condition
property
¶
condition: SearchSearchItemTriggerABusCxpiCondition
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:CONDition command.
Description
- This command sets or queries the trigger condition for a CXPI bus. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:CONDition?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:CONDition?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:CONDition valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:CONDition {STARt|FRAMes|FRAMEID|PTYPe|DLC|EXTDLC|NETMN|COUNter|DATa|ERRors}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:CONDition?
Info
STARtspecifies STARt as the event for a CXPI frame to search on. This is the default value.FRAMesspecifies FRAMes as the frame types for CXPI packets to search on.FRAMEIDspecifies FRAMEID as the field within a CXPI frame to search on.PTYPespecifies PTYPe as the field within a CXPI frame to search on.DLCspecifies DLC as the field within a CXPI frame to search on.EXTDLCspecifies EXTDLC as the field within a CXPI frame to search on.NETMNspecifies NETMN as the field within a CXPI frame to search on.COUNterspecifies COUNter as the field within a CXPI frame to search on.DATaspecifies DATa as the field within a CXPI frame to search on.ERRorsspecifies ERRors as type of error within a CXPI frame to search on.
counter
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:COUNter command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:COUNter?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:COUNter?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:COUNter:VALuecommand.
data
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:DATa command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:DATa?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:DATa?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.size: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:DATa:SIZecommand..value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:DATa:VALuecommand.
dlc
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:DLC command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:DLC?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:DLC?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:DLC:VALuecommand.
error
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:ERROR command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:ERROR?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:ERROR?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.type: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:ERROR:TYPecommand.
extdlc
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:EXTDLC command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:EXTDLC?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:EXTDLC?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:EXTDLC:VALuecommand.
frame
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:FRAMe command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:FRAMe?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:FRAMe?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.type: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:FRAMe:TYPecommand.
frameid
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:FRAMEID command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:FRAMEID?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:FRAMEID?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:FRAMEID:VALuecommand.
netmn
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:NETMN command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:NETMN?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:NETMN?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.sleepind: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:NETMN:SLEEPINDcommand..wakeupind: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:NETMN:WAKEUPINDcommand.
SearchSearchItemTriggerABusCxpiCondition
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:CONDition command.
Description
- This command sets or queries the trigger condition for a CXPI bus. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:CONDition?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:CONDition?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:CONDition valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:CONDition {STARt|FRAMes|FRAMEID|PTYPe|DLC|EXTDLC|NETMN|COUNter|DATa|ERRors}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:CONDition?
Info
STARtspecifies STARt as the event for a CXPI frame to search on. This is the default value.FRAMesspecifies FRAMes as the frame types for CXPI packets to search on.FRAMEIDspecifies FRAMEID as the field within a CXPI frame to search on.PTYPespecifies PTYPe as the field within a CXPI frame to search on.DLCspecifies DLC as the field within a CXPI frame to search on.EXTDLCspecifies EXTDLC as the field within a CXPI frame to search on.NETMNspecifies NETMN as the field within a CXPI frame to search on.COUNterspecifies COUNter as the field within a CXPI frame to search on.DATaspecifies DATa as the field within a CXPI frame to search on.ERRorsspecifies ERRors as type of error within a CXPI frame to search on.
SearchSearchItemTriggerABusCxpiCounter
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:COUNter command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:COUNter?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:COUNter?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:COUNter:VALuecommand.
value
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:COUNter:VALue command.
Description
- This command specifies the binary counter string used for CXPI triggering if the trigger condition is COUNTER. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:COUNter:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:COUNter:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:COUNter:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:COUNter:VALue <Qstring>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:COUNter:VALue?
Info
<Qstring>specifies the binary counter string. The default size and value Counter is 2 bits and ‘XX’ respectively.
SearchSearchItemTriggerABusCxpiCounterValue
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:COUNter:VALue command.
Description
- This command specifies the binary counter string used for CXPI triggering if the trigger condition is COUNTER. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:COUNter:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:COUNter:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:COUNter:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:COUNter:VALue <Qstring>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:COUNter:VALue?
Info
<Qstring>specifies the binary counter string. The default size and value Counter is 2 bits and ‘XX’ respectively.
SearchSearchItemTriggerABusCxpiData
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:DATa command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:DATa?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:DATa?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.size: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:DATa:SIZecommand..value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:DATa:VALuecommand.
size
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:DATa:SIZe command.
Description
- This command specifies the length of the data string in bytes to be used for CXPI triggering if the trigger condition is DATA. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:DATa:SIZe?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:DATa:SIZe?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:DATa:SIZe valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:DATa:SIZe <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:DATa:SIZe?
Info
<NR1>specifies the data size. The default data size is 1 and the calid range is 1 to 5.
value
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:DATa:VALue command.
Description
- This command specifies the binary data string used for CXPI triggering if the trigger condition is DATA. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:DATa:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:DATa:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:DATa:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:DATa:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:DATa:VALue?
Info
<QString>is the identifier value. The default size and value for DATA is 8 bits and ‘XXXX XXXX’ respectively.
SearchSearchItemTriggerABusCxpiDataSize
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:DATa:SIZe command.
Description
- This command specifies the length of the data string in bytes to be used for CXPI triggering if the trigger condition is DATA. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:DATa:SIZe?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:DATa:SIZe?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:DATa:SIZe valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:DATa:SIZe <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:DATa:SIZe?
Info
<NR1>specifies the data size. The default data size is 1 and the calid range is 1 to 5.
SearchSearchItemTriggerABusCxpiDataValue
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:DATa:VALue command.
Description
- This command specifies the binary data string used for CXPI triggering if the trigger condition is DATA. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:DATa:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:DATa:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:DATa:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:DATa:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:DATa:VALue?
Info
<QString>is the identifier value. The default size and value for DATA is 8 bits and ‘XXXX XXXX’ respectively.
SearchSearchItemTriggerABusCxpiDlc
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:DLC command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:DLC?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:DLC?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:DLC:VALuecommand.
value
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:DLC:VALue command.
Description
- This command specifies the binary DLC string used for CXPI triggering if the trigger condition is DLC. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:DLC:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:DLC:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:DLC:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:DLC:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:DLC:VALue?
Info
<QString>is the identifier value. The default size and value of DLC is 4 bits and ‘XXXX’ respectively.
SearchSearchItemTriggerABusCxpiDlcValue
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:DLC:VALue command.
Description
- This command specifies the binary DLC string used for CXPI triggering if the trigger condition is DLC. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:DLC:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:DLC:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:DLC:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:DLC:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:DLC:VALue?
Info
<QString>is the identifier value. The default size and value of DLC is 4 bits and ‘XXXX’ respectively.
SearchSearchItemTriggerABusCxpiError
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:ERROR command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:ERROR?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:ERROR?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.type: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:ERROR:TYPecommand.
type
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:ERROR:TYPe command.
Description
- This command sets or queries the Error Type in CXPI bus. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:ERROR:TYPe?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:ERROR:TYPe?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:ERROR:TYPe valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:ERROR:TYPe {CRC|PARity|FRAMe|IBS|ANY}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:ERROR:TYPe?
Info
CRCspecifies CRC as the field within a CXPI frame to search on.PARityspecifies PARity as the field within a CXPI frame to search on. The default Error Type is Parity.FRAMespecifies FRAMe as the field within a CXPI frame to search on.IBSspecifies IBS as the field within a CXPI frame to search on.ANYspecifies ANY as any type of error within a CXPI frame to search on.
SearchSearchItemTriggerABusCxpiErrorType
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:ERROR:TYPe command.
Description
- This command sets or queries the Error Type in CXPI bus. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:ERROR:TYPe?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:ERROR:TYPe?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:ERROR:TYPe valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:ERROR:TYPe {CRC|PARity|FRAMe|IBS|ANY}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:ERROR:TYPe?
Info
CRCspecifies CRC as the field within a CXPI frame to search on.PARityspecifies PARity as the field within a CXPI frame to search on. The default Error Type is Parity.FRAMespecifies FRAMe as the field within a CXPI frame to search on.IBSspecifies IBS as the field within a CXPI frame to search on.ANYspecifies ANY as any type of error within a CXPI frame to search on.
SearchSearchItemTriggerABusCxpiExtdlc
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:EXTDLC command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:EXTDLC?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:EXTDLC?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:EXTDLC:VALuecommand.
value
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:EXTDLC:VALue command.
Description
- This command specifies the binary DLC string used for CXPI triggering if the trigger condition is Ext DLC. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:EXTDLC:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:EXTDLC:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:EXTDLC:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:EXTDLC:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:EXTDLC:VALue?
Info
<QString>is the identifier value. The default size and value of Ext DLC is 8 bits and ‘XXXX XXXX’ respectively.
SearchSearchItemTriggerABusCxpiExtdlcValue
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:EXTDLC:VALue command.
Description
- This command specifies the binary DLC string used for CXPI triggering if the trigger condition is Ext DLC. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:EXTDLC:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:EXTDLC:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:EXTDLC:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:EXTDLC:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:EXTDLC:VALue?
Info
<QString>is the identifier value. The default size and value of Ext DLC is 8 bits and ‘XXXX XXXX’ respectively.
SearchSearchItemTriggerABusCxpiFrame
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:FRAMe command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:FRAMe?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:FRAMe?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.type: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:FRAMe:TYPecommand.
type
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:FRAMe:TYPe command.
Description
- This command sets or queries the frame type in CXPI bus. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:FRAMe:TYPe?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:FRAMe:TYPe?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:FRAMe:TYPe valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:FRAMe:TYPe {NORMal|SLEep|LONG|POLLINGNORMal|POLLINGLONG}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:FRAMe:TYPe?
Info
NORMalspecifies NORMal as the packet type CXPI frame to search on. The default frame type is normal.SLEepspecifies SLEep as the packet type CXPI frame to search on.LONGspecifies LONG as the packet type CXPI frame to search on.POLLINGNORMalspecifies POLLINGNORMal as the packet type CXPI frame to search on.POLLINGLONGspecifies POLLINGLONG as the packet type CXPI frame to search on.
SearchSearchItemTriggerABusCxpiFrameType
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:FRAMe:TYPe command.
Description
- This command sets or queries the frame type in CXPI bus. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:FRAMe:TYPe?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:FRAMe:TYPe?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:FRAMe:TYPe valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:FRAMe:TYPe {NORMal|SLEep|LONG|POLLINGNORMal|POLLINGLONG}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:FRAMe:TYPe?
Info
NORMalspecifies NORMal as the packet type CXPI frame to search on. The default frame type is normal.SLEepspecifies SLEep as the packet type CXPI frame to search on.LONGspecifies LONG as the packet type CXPI frame to search on.POLLINGNORMalspecifies POLLINGNORMal as the packet type CXPI frame to search on.POLLINGLONGspecifies POLLINGLONG as the packet type CXPI frame to search on.
SearchSearchItemTriggerABusCxpiFrameid
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:FRAMEID command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:FRAMEID?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:FRAMEID?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:FRAMEID:VALuecommand.
value
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:FRAMEID:VALue command.
Description
- This command specifies the binary frameId string used for CXPI triggering if the trigger condition is FRAMEID. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:FRAMEID:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:FRAMEID:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:FRAMEID:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:FRAMEID:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:FRAMEID:VALue?
Info
<QString>is the identifier value. The default size and value of frame ID is 7 bits and ‘XXX XXXX’ respectively.
SearchSearchItemTriggerABusCxpiFrameidValue
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:FRAMEID:VALue command.
Description
- This command specifies the binary frameId string used for CXPI triggering if the trigger condition is FRAMEID. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:FRAMEID:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:FRAMEID:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:FRAMEID:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:FRAMEID:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:FRAMEID:VALue?
Info
<QString>is the identifier value. The default size and value of frame ID is 7 bits and ‘XXX XXXX’ respectively.
SearchSearchItemTriggerABusCxpiNetmn
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:NETMN command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:NETMN?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:NETMN?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.sleepind: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:NETMN:SLEEPINDcommand..wakeupind: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:NETMN:WAKEUPINDcommand.
sleepind
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:NETMN:SLEEPIND command.
Description
- This command sets or queries the Sleep Status in CXPI bus. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:NETMN:SLEEPIND?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:NETMN:SLEEPIND?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:NETMN:SLEEPIND valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:NETMN:SLEEPIND {ON|OFF|EITHer}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:NETMN:SLEEPIND?
Info
ONspecifies the Sleep Status as on. The default status is on.OFFspecifies the Sleep Status as off.EITHerspecifies the Sleep Status as either.
wakeupind
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:NETMN:WAKEUPIND command.
Description
- This command sets or queries the Wakeup Status in CXPI bus. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:NETMN:WAKEUPIND?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:NETMN:WAKEUPIND?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:NETMN:WAKEUPIND valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:NETMN:WAKEUPIND {ON|OFF|EITHer}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:NETMN:WAKEUPIND?
Info
ONspecifies the Wakeup Status as on. The default status is on.OFFspecifies the Wakeup Status as off.EITHerspecifies the Wakeup Status as either.
SearchSearchItemTriggerABusCxpiNetmnSleepind
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:NETMN:SLEEPIND command.
Description
- This command sets or queries the Sleep Status in CXPI bus. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:NETMN:SLEEPIND?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:NETMN:SLEEPIND?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:NETMN:SLEEPIND valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:NETMN:SLEEPIND {ON|OFF|EITHer}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:NETMN:SLEEPIND?
Info
ONspecifies the Sleep Status as on. The default status is on.OFFspecifies the Sleep Status as off.EITHerspecifies the Sleep Status as either.
SearchSearchItemTriggerABusCxpiNetmnWakeupind
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:NETMN:WAKEUPIND command.
Description
- This command sets or queries the Wakeup Status in CXPI bus. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:NETMN:WAKEUPIND?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:NETMN:WAKEUPIND?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:NETMN:WAKEUPIND valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:NETMN:WAKEUPIND {ON|OFF|EITHer}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CXPI:NETMN:WAKEUPIND?
Info
ONspecifies the Wakeup Status as on. The default status is on.OFFspecifies the Wakeup Status as off.EITHerspecifies the Wakeup Status as either.
SearchSearchItemTriggerABusDphy
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.blue: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:BLUecommand tree..condition: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:CONDitioncommand..data: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:DATacommand tree..error: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:ERRorcommand tree..escapemode: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:ESCAPEMODecommand tree..green: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:GREencommand tree..mode: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:MODecommand tree..packets: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:PACKetscommand tree..pixel: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:PIXelcommand tree..red: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:REDcommand tree..wordcount: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:WORDCOUNtcommand tree..ycbcr: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:YCBCRcommand tree..yuv: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:YUVcommand tree.
blue
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:BLUe command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:BLUe?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:BLUe?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:BLUe:VALuecommand.
condition
property
¶
condition: SearchSearchItemTriggerABusDphyCondition
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:CONDition command.
Description
- This command sets or queries the trigger condition for an DPHY bus. The default trigger on condition is SOT.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:CONDition?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:CONDition?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:CONDition valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:CONDition {SOT|EOT|DATa|EOTPDATa|OPTIONALPARam|SCRambling|COMPression|PACKets|BUSTURNAROUnd|ESCAPEMODe|STop|ERRors|MODe}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:CONDition?
Info
SOTspecifies SOT as the field within a DPHY frame to search on.EOTspecifies EOT as the field within a DPHY frame to search on.DATaspecifies DATa as the field within a DPHY frame to search on.EOTPDATaspecifies EOTPDATa as the field within a DPHY frame to search on.OPTIONALPARamspecifies OPTIONALPARam as the field within a DPHY frame to search on.SCRamblingspecifies SCRambling as the field within a DPHY frame to search on.COMPressionspecifies COMPression as the field within a DPHY frame to search on.PACKetsspecifies PACKets as the field within a DPHY frame to search on.BUSTURNAROUndspecifies BUSTURNAROUnd as the field within a DPHY frame to search on.ESCAPEMODespecifies ESCAPEMODe as the field within a DPHY frame to search on.STopspecifies STop as the field within a DPHY frame to search on.ERRorsspecifies ERRors as the field within a DPHY frame to search on.MODespecifies MODe as the field within a DPHY frame to search on.
data
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:DATa command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:DATa?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:DATa?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.size: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:DATa:SIZecommand..value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:DATa:VALuecommand.
error
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:ERRor command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:ERRor?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:ERRor?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.type: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:ERRor:TYPecommand.
escapemode
property
¶
escapemode: SearchSearchItemTriggerABusDphyEscapemode
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:ESCAPEMODe command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:ESCAPEMODe?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:ESCAPEMODe?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.command: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:ESCAPEMODe:COMMandcommand.
green
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:GREen command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:GREen?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:GREen?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:GREen:VALuecommand.
mode
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:MODe command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:MODe?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:MODe?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.type: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:MODe:TYPecommand.
packets
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:PACKets command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:PACKets?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:PACKets?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.list: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:PACKets:LISTcommand..type: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:PACKets:TYPecommand.
pixel
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:PIXel command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:PIXel?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:PIXel?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.number: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:PIXel:NUMBercommand..searchoption: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:PIXel:SEARCHOPTioncommand.
red
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:RED command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:RED?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:RED?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:RED:VALuecommand.
wordcount
property
¶
wordcount: SearchSearchItemTriggerABusDphyWordcount
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:WORDCOUNt command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:WORDCOUNt?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:WORDCOUNt?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:WORDCOUNt:VALuecommand.
ycbcr
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:YCBCR command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:YCBCR?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:YCBCR?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.cb: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:YCBCR:CBcommand..cr: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:YCBCR:CRcommand..y: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:YCBCR:Ycommand.
yuv
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:YUV command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:YUV?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:YUV?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.u: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:YUV:Ucommand..v: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:YUV:Vcommand..y: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:YUV:Ycommand.
SearchSearchItemTriggerABusDphyBlue
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:BLUe command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:BLUe?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:BLUe?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:BLUe:VALuecommand.
value
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:BLUe:VALue command.
Description
- This command specifies the blue data string used for DPHY triggering if the trigger condition is on RGB packet.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:BLUe:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:BLUe:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:BLUe:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:BLUe:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:BLUe:VALue?
Info
<QString>is the identifier value. The default blue value is XXXXXXXXXX.
SearchSearchItemTriggerABusDphyBlueValue
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:BLUe:VALue command.
Description
- This command specifies the blue data string used for DPHY triggering if the trigger condition is on RGB packet.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:BLUe:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:BLUe:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:BLUe:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:BLUe:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:BLUe:VALue?
Info
<QString>is the identifier value. The default blue value is XXXXXXXXXX.
SearchSearchItemTriggerABusDphyCondition
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:CONDition command.
Description
- This command sets or queries the trigger condition for an DPHY bus. The default trigger on condition is SOT.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:CONDition?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:CONDition?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:CONDition valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:CONDition {SOT|EOT|DATa|EOTPDATa|OPTIONALPARam|SCRambling|COMPression|PACKets|BUSTURNAROUnd|ESCAPEMODe|STop|ERRors|MODe}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:CONDition?
Info
SOTspecifies SOT as the field within a DPHY frame to search on.EOTspecifies EOT as the field within a DPHY frame to search on.DATaspecifies DATa as the field within a DPHY frame to search on.EOTPDATaspecifies EOTPDATa as the field within a DPHY frame to search on.OPTIONALPARamspecifies OPTIONALPARam as the field within a DPHY frame to search on.SCRamblingspecifies SCRambling as the field within a DPHY frame to search on.COMPressionspecifies COMPression as the field within a DPHY frame to search on.PACKetsspecifies PACKets as the field within a DPHY frame to search on.BUSTURNAROUndspecifies BUSTURNAROUnd as the field within a DPHY frame to search on.ESCAPEMODespecifies ESCAPEMODe as the field within a DPHY frame to search on.STopspecifies STop as the field within a DPHY frame to search on.ERRorsspecifies ERRors as the field within a DPHY frame to search on.MODespecifies MODe as the field within a DPHY frame to search on.
SearchSearchItemTriggerABusDphyData
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:DATa command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:DATa?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:DATa?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.size: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:DATa:SIZecommand..value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:DATa:VALuecommand.
size
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:DATa:SIZe command.
Description
- This command specifies the length of the data string in bytes to be used for an DPHY trigger if the trigger condition is DATA. The default data size is 1 byte and ranges between 1 and 5. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:DATa:SIZe?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:DATa:SIZe?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:DATa:SIZe valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:DATa:SIZe <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:DATa:SIZe?
Info
<NR1>specifies the data size.
value
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:DATa:VALue command.
Description
- This command specifies the binary data string used for DPHY triggering if the trigger condition is DATA.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:DATa:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:DATa:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:DATa:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:DATa:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:DATa:VALue?
Info
<QString>is the identifier value. The default value is XXXXXXXX.
SearchSearchItemTriggerABusDphyDataSize
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:DATa:SIZe command.
Description
- This command specifies the length of the data string in bytes to be used for an DPHY trigger if the trigger condition is DATA. The default data size is 1 byte and ranges between 1 and 5. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:DATa:SIZe?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:DATa:SIZe?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:DATa:SIZe valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:DATa:SIZe <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:DATa:SIZe?
Info
<NR1>specifies the data size.
SearchSearchItemTriggerABusDphyDataValue
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:DATa:VALue command.
Description
- This command specifies the binary data string used for DPHY triggering if the trigger condition is DATA.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:DATa:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:DATa:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:DATa:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:DATa:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:DATa:VALue?
Info
<QString>is the identifier value. The default value is XXXXXXXX.
SearchSearchItemTriggerABusDphyError
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:ERRor command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:ERRor?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:ERRor?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.type: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:ERRor:TYPecommand.
type
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:ERRor:TYPe command.
Description
- This command sets or queries the error type for DPHY bus. The default error type condition is ANY.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:ERRor:TYPe?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:ERRor:TYPe?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:ERRor:TYPe valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:ERRor:TYPe {ANY|ECC|CRC}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:ERRor:TYPe?
Info
ANYspecifies ANY as the field within a DPHY frame to search on.ECCspecifies ECC as the field within a DPHY frame to search on.CRCspecifies CRC as the field within a DPHY frame to search on.
SearchSearchItemTriggerABusDphyErrorType
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:ERRor:TYPe command.
Description
- This command sets or queries the error type for DPHY bus. The default error type condition is ANY.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:ERRor:TYPe?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:ERRor:TYPe?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:ERRor:TYPe valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:ERRor:TYPe {ANY|ECC|CRC}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:ERRor:TYPe?
Info
ANYspecifies ANY as the field within a DPHY frame to search on.ECCspecifies ECC as the field within a DPHY frame to search on.CRCspecifies CRC as the field within a DPHY frame to search on.
SearchSearchItemTriggerABusDphyEscapemode
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:ESCAPEMODe command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:ESCAPEMODe?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:ESCAPEMODe?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.command: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:ESCAPEMODe:COMMandcommand.
command
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:ESCAPEMODe:COMMand command.
Description
- This command sets or queries the escape mode command type for DPHY bus.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:ESCAPEMODe:COMMand?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:ESCAPEMODe:COMMand?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:ESCAPEMODe:COMMand valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:ESCAPEMODe:COMMand {LPDT|ULPS|RESETTRIGger|ANY}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:ESCAPEMODe:COMMand?
Info
LPDTspecifies LPDT as the field within a DPHY frame to search on.ULPSspecifies ULPS as the field within a DPHY frame to search on.RESETTRIGgerspecifies RESETTRIGger as the field within a DPHY frame to search on.ANYspecifies ANY as the field within a DPHY frame to search on. ANY is the default value.
SearchSearchItemTriggerABusDphyEscapemodeCommand
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:ESCAPEMODe:COMMand command.
Description
- This command sets or queries the escape mode command type for DPHY bus.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:ESCAPEMODe:COMMand?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:ESCAPEMODe:COMMand?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:ESCAPEMODe:COMMand valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:ESCAPEMODe:COMMand {LPDT|ULPS|RESETTRIGger|ANY}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:ESCAPEMODe:COMMand?
Info
LPDTspecifies LPDT as the field within a DPHY frame to search on.ULPSspecifies ULPS as the field within a DPHY frame to search on.RESETTRIGgerspecifies RESETTRIGger as the field within a DPHY frame to search on.ANYspecifies ANY as the field within a DPHY frame to search on. ANY is the default value.
SearchSearchItemTriggerABusDphyGreen
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:GREen command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:GREen?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:GREen?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:GREen:VALuecommand.
value
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:GREen:VALue command.
Description
- This command specifies the green data string used for DPHY triggering if the trigger condition is on RGB packet.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:GREen:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:GREen:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:GREen:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:GREen:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:GREen:VALue?
Info
<QString>is the identifier value. The default green value is XXXXXXXXXX.
SearchSearchItemTriggerABusDphyGreenValue
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:GREen:VALue command.
Description
- This command specifies the green data string used for DPHY triggering if the trigger condition is on RGB packet.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:GREen:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:GREen:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:GREen:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:GREen:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:GREen:VALue?
Info
<QString>is the identifier value. The default green value is XXXXXXXXXX.
SearchSearchItemTriggerABusDphyMode
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:MODe command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:MODe?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:MODe?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.type: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:MODe:TYPecommand.
type
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:MODe:TYPe command.
Description
- This command sets or queries the mode type for DPHY bus. The default mode type condition is HS.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:MODe:TYPe?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:MODe:TYPe?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:MODe:TYPe valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:MODe:TYPe {HS|LP}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:MODe:TYPe?
Info
HSspecifies HS as the mode within a DPHY frame to search on. HS is default mode type condition.LPspecifies LP as the mode within a DPHY frame to search on.
SearchSearchItemTriggerABusDphyModeType
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:MODe:TYPe command.
Description
- This command sets or queries the mode type for DPHY bus. The default mode type condition is HS.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:MODe:TYPe?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:MODe:TYPe?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:MODe:TYPe valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:MODe:TYPe {HS|LP}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:MODe:TYPe?
Info
HSspecifies HS as the mode within a DPHY frame to search on. HS is default mode type condition.LPspecifies LP as the mode within a DPHY frame to search on.
SearchSearchItemTriggerABusDphyPackets
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:PACKets command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:PACKets?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:PACKets?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.list: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:PACKets:LISTcommand..type: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:PACKets:TYPecommand.
list
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:PACKets:LIST command.
Description
- This command sets or queries the packet list for DPHY bus. The default packet list condition is VSYNCSTART.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:PACKets:LIST?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:PACKets:LIST?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:PACKets:LIST valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:PACKets:LIST {VSYNCSTART|VSYNCEND|HSYNCSTART|HSYNCEND|EOTP|COLOROFF|COLORON|SHUTDOWN|TURNON|GSW|GR|COMPRESSION|SCRAMBLING|EXECUTEQUEue|DCSSW|DCSR|GLONGWRITE|DSINULL|DSIBLANk|MAXRETSIZE|DCSGLONGWRITE|PICPARameter|COMPRESSEDPSTReam|PPS101010|PPS121212|PPS565|PPS666|LPS666|PPS888|YCBCR24|LPYCBCR24|YCBCR16|YCBCR12|ACKNowledge|ERRORREPort|GSRR|GLONGREAD|DCSLONGREAD|DCSSRR|FRAMESTARt|FRAMEEND|LINESTARt|LINEEND|GSP|CSINULL|CSIBLANk|EMBEDDED|USEREIGHTB|RGB565|RGB555|RGB444|RGB666|RAW6|RAW7|RAW8|RAW10|RAW12|RAW14|RAW16|RAW20|RGB888|YUV420L8|YUV8BIT|YUV422B10|YUV420B10}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:PACKets:LIST?
Info
VSYNCSTARTspecifies VSYNCSTART as the packet within DPHY frame to search on.VSYNCENDspecifies VSYNCEND as the packet within DPHY frame to search on.HSYNCSTARTspecifies HSYNCSTART as the packet within DPHY frame to search on.HSYNCENDspecifies HSYNCEND as the packet within DPHY frame to search on.EOTPspecifies EOTP as the packet within DPHY frame to search on.COLOROFFspecifies COLOROFF as the packet within DPHY frame to search on.COLORONspecifies COLORON as the packet within DPHY frame to search on.SHUTDOWNspecifies SHUTDOWN as the packet within DPHY frame to search on.TURNONspecifies TURNON as the packet within DPHY frame to search on.GSWspecifies GSW as the packet within DPHY frame to search on.GRspecifies GR as the packet within DPHY frame to search on.COMPRESSIONspecifies COMPRESSION as the packet within DPHY frame to search on.SCRAMBLINGspecifies SCRAMBLING as the packet within DPHY frame to search on.EXECUTEQUEuespecifies EXECUTEQUEue as the packet within DPHY frame to search on.DCSSWspecifies DCSSW as the packet within DPHY frame to search on.DCSRspecifies DCSR as the packet within DPHY frame to search on.GLONGWRITEspecifies GLONGWRITE as the packet within DPHY frame to search on.DSINULLspecifies DSINULL as the packet within DPHY frame to search on.DSIBLANkspecifies DSIBLANk as the packet within DPHY frame to search on.MAXRETSIZEspecifies MAXRETSIZE as the packet within DPHY frame to search on.DCSGLONGWRITEspecifies DCSGLONGWRITE as the packet within DPHY frame to search on.PICPARameterspecifies PICPARameter as the packet within DPHY frame to search on.COMPRESSEDPSTReamspecifies COMPRESSEDPSTReam as the packet within DPHY frame to search on.PPS101010specifies PPS101010 as the packet within DPHY frame to search on.PPS121212specifies PPS121212 as the packet within DPHY frame to search on.PPS565specifies PPS565 as the packet within DPHY frame to search on.PPS666specifies PPS666 as the packet within DPHY frame to search on.LPS666specifies LPS666 as the packet within DPHY frame to search on.PPS888specifies LPS666 as the packet within DPHY frame to search on.YCBCR24specifies YCBCR24 as the packet within DPHY frame to search on.LPYCBCR24specifies LPYCBCR24 as the packet within DPHY frame to search on.YCBCR16specifies YCBCR16 as the packet within DPHY frame to search on.YCBCR12specifies YCBCR12 as the packet within DPHY frame to search on.ACKNowledgespecifies ACKNowledge as the packet within DPHY frame to search on.ERRORREPortspecifies ERRORREPort as the packet within DPHY frame to search on.GSRRspecifies GSRR as the packet within DPHY frame to search on.GLONGREADspecifies GLONGREAD as the packet within DPHY frame to search on.DCSLONGREADspecifies DCSLONGREAD as the packet within DPHY frame to search on.DCSSRRspecifies DCSSRR as the packet within DPHY frame to search on.FRAMESTARtspecifies FRAMESTARt as the packet within DPHY frame to search on.FRAMEENDspecifies FRAMEEND as the packet within DPHY frame to search on.LINESTARtspecifies LINESTARt as the packet within DPHY frame to search on.LINEENDspecifies LINEEND as the packet within DPHY frame to search on.GSPspecifies GSP as the packet within DPHY frame to search on.CSINULLspecifies CSINULL as the packet within DPHY frame to search on.CSIBLANkspecifies CSIBLANk as the packet within DPHY frame to search on.EMBEDDEDspecifies EMBEDDED as the packet within DPHY frame to search on.USEREIGHTBspecifies USEREIGHTB as the packet within DPHY frame to search on.RGB565specifies RGB565 as the packet within DPHY frame to search on.RGB555specifies RGB555 as the packet within DPHY frame to search on.RGB444specifies RGB444 as the packet within DPHY frame to search on.RGB666specifies RGB666 as the packet within DPHY frame to search on.RAW6specifies RAW6 as the packet within DPHY frame to search on.RAW7specifies RAW7 as the packet within DPHY frame to search on.RAW8specifies RAW8 as the packet within DPHY frame to search on.RAW10specifies RAW10 as the packet within DPHY frame to search on.RAW12specifies RAW12 as the packet within DPHY frame to search on.RAW14specifies RAW14 as the packet within DPHY frame to search on.RAW16specifies RAW16 as the packet within DPHY frame to search on.RAW20specifies RAW20 as the packet within DPHY frame to search on.RGB888specifies RGB888 as the packet within DPHY frame to search on.YUV420L8specifies YUV420L8 as the packet within DPHY frame to search on.YUV8BITspecifies YUV8BIT as the packet within DPHY frame to search on.YUV422B10specifies YUV422B10 as the packet within DPHY frame to search on.YUV420B10specifies YUV420B10 as the packet within DPHY frame to search on.
type
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:PACKets:TYPe command.
Description
- This command sets or queries the packet type for DPHY bus. The default packet type condition is SHORt.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:PACKets:TYPe?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:PACKets:TYPe?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:PACKets:TYPe valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:PACKets:TYPe {SHORt|LONG}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:PACKets:TYPe?
Info
SHORtspecifies SHORt as the field within a DPHY frame to search on. SHORt is the default packet type condition.LONGspecifies LONG as the field within a DPHY frame to search on.
SearchSearchItemTriggerABusDphyPacketsList
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:PACKets:LIST command.
Description
- This command sets or queries the packet list for DPHY bus. The default packet list condition is VSYNCSTART.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:PACKets:LIST?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:PACKets:LIST?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:PACKets:LIST valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:PACKets:LIST {VSYNCSTART|VSYNCEND|HSYNCSTART|HSYNCEND|EOTP|COLOROFF|COLORON|SHUTDOWN|TURNON|GSW|GR|COMPRESSION|SCRAMBLING|EXECUTEQUEue|DCSSW|DCSR|GLONGWRITE|DSINULL|DSIBLANk|MAXRETSIZE|DCSGLONGWRITE|PICPARameter|COMPRESSEDPSTReam|PPS101010|PPS121212|PPS565|PPS666|LPS666|PPS888|YCBCR24|LPYCBCR24|YCBCR16|YCBCR12|ACKNowledge|ERRORREPort|GSRR|GLONGREAD|DCSLONGREAD|DCSSRR|FRAMESTARt|FRAMEEND|LINESTARt|LINEEND|GSP|CSINULL|CSIBLANk|EMBEDDED|USEREIGHTB|RGB565|RGB555|RGB444|RGB666|RAW6|RAW7|RAW8|RAW10|RAW12|RAW14|RAW16|RAW20|RGB888|YUV420L8|YUV8BIT|YUV422B10|YUV420B10}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:PACKets:LIST?
Info
VSYNCSTARTspecifies VSYNCSTART as the packet within DPHY frame to search on.VSYNCENDspecifies VSYNCEND as the packet within DPHY frame to search on.HSYNCSTARTspecifies HSYNCSTART as the packet within DPHY frame to search on.HSYNCENDspecifies HSYNCEND as the packet within DPHY frame to search on.EOTPspecifies EOTP as the packet within DPHY frame to search on.COLOROFFspecifies COLOROFF as the packet within DPHY frame to search on.COLORONspecifies COLORON as the packet within DPHY frame to search on.SHUTDOWNspecifies SHUTDOWN as the packet within DPHY frame to search on.TURNONspecifies TURNON as the packet within DPHY frame to search on.GSWspecifies GSW as the packet within DPHY frame to search on.GRspecifies GR as the packet within DPHY frame to search on.COMPRESSIONspecifies COMPRESSION as the packet within DPHY frame to search on.SCRAMBLINGspecifies SCRAMBLING as the packet within DPHY frame to search on.EXECUTEQUEuespecifies EXECUTEQUEue as the packet within DPHY frame to search on.DCSSWspecifies DCSSW as the packet within DPHY frame to search on.DCSRspecifies DCSR as the packet within DPHY frame to search on.GLONGWRITEspecifies GLONGWRITE as the packet within DPHY frame to search on.DSINULLspecifies DSINULL as the packet within DPHY frame to search on.DSIBLANkspecifies DSIBLANk as the packet within DPHY frame to search on.MAXRETSIZEspecifies MAXRETSIZE as the packet within DPHY frame to search on.DCSGLONGWRITEspecifies DCSGLONGWRITE as the packet within DPHY frame to search on.PICPARameterspecifies PICPARameter as the packet within DPHY frame to search on.COMPRESSEDPSTReamspecifies COMPRESSEDPSTReam as the packet within DPHY frame to search on.PPS101010specifies PPS101010 as the packet within DPHY frame to search on.PPS121212specifies PPS121212 as the packet within DPHY frame to search on.PPS565specifies PPS565 as the packet within DPHY frame to search on.PPS666specifies PPS666 as the packet within DPHY frame to search on.LPS666specifies LPS666 as the packet within DPHY frame to search on.PPS888specifies LPS666 as the packet within DPHY frame to search on.YCBCR24specifies YCBCR24 as the packet within DPHY frame to search on.LPYCBCR24specifies LPYCBCR24 as the packet within DPHY frame to search on.YCBCR16specifies YCBCR16 as the packet within DPHY frame to search on.YCBCR12specifies YCBCR12 as the packet within DPHY frame to search on.ACKNowledgespecifies ACKNowledge as the packet within DPHY frame to search on.ERRORREPortspecifies ERRORREPort as the packet within DPHY frame to search on.GSRRspecifies GSRR as the packet within DPHY frame to search on.GLONGREADspecifies GLONGREAD as the packet within DPHY frame to search on.DCSLONGREADspecifies DCSLONGREAD as the packet within DPHY frame to search on.DCSSRRspecifies DCSSRR as the packet within DPHY frame to search on.FRAMESTARtspecifies FRAMESTARt as the packet within DPHY frame to search on.FRAMEENDspecifies FRAMEEND as the packet within DPHY frame to search on.LINESTARtspecifies LINESTARt as the packet within DPHY frame to search on.LINEENDspecifies LINEEND as the packet within DPHY frame to search on.GSPspecifies GSP as the packet within DPHY frame to search on.CSINULLspecifies CSINULL as the packet within DPHY frame to search on.CSIBLANkspecifies CSIBLANk as the packet within DPHY frame to search on.EMBEDDEDspecifies EMBEDDED as the packet within DPHY frame to search on.USEREIGHTBspecifies USEREIGHTB as the packet within DPHY frame to search on.RGB565specifies RGB565 as the packet within DPHY frame to search on.RGB555specifies RGB555 as the packet within DPHY frame to search on.RGB444specifies RGB444 as the packet within DPHY frame to search on.RGB666specifies RGB666 as the packet within DPHY frame to search on.RAW6specifies RAW6 as the packet within DPHY frame to search on.RAW7specifies RAW7 as the packet within DPHY frame to search on.RAW8specifies RAW8 as the packet within DPHY frame to search on.RAW10specifies RAW10 as the packet within DPHY frame to search on.RAW12specifies RAW12 as the packet within DPHY frame to search on.RAW14specifies RAW14 as the packet within DPHY frame to search on.RAW16specifies RAW16 as the packet within DPHY frame to search on.RAW20specifies RAW20 as the packet within DPHY frame to search on.RGB888specifies RGB888 as the packet within DPHY frame to search on.YUV420L8specifies YUV420L8 as the packet within DPHY frame to search on.YUV8BITspecifies YUV8BIT as the packet within DPHY frame to search on.YUV422B10specifies YUV422B10 as the packet within DPHY frame to search on.YUV420B10specifies YUV420B10 as the packet within DPHY frame to search on.
SearchSearchItemTriggerABusDphyPacketsType
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:PACKets:TYPe command.
Description
- This command sets or queries the packet type for DPHY bus. The default packet type condition is SHORt.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:PACKets:TYPe?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:PACKets:TYPe?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:PACKets:TYPe valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:PACKets:TYPe {SHORt|LONG}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:PACKets:TYPe?
Info
SHORtspecifies SHORt as the field within a DPHY frame to search on. SHORt is the default packet type condition.LONGspecifies LONG as the field within a DPHY frame to search on.
SearchSearchItemTriggerABusDphyPixel
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:PIXel command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:PIXel?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:PIXel?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.number: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:PIXel:NUMBercommand..searchoption: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:PIXel:SEARCHOPTioncommand.
number
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:PIXel:NUMBer command.
Description
- This command specifies the pixel number to be used for DPHY triggering if the trigger condition is on pixel number pattern. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:PIXel:NUMBer?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:PIXel:NUMBer?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:PIXel:NUMBer valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:PIXel:NUMBer <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:PIXel:NUMBer?
Info
<NR1>specifies the pixel number. The default pixel number value is 0.
searchoption
property
¶
searchoption: SearchSearchItemTriggerABusDphyPixelSearchoption
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:PIXel:SEARCHOPTion command.
Description
- This command sets or queries the search pattern type for DPHY bus. The default search pattern type value is PIXELVALue.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:PIXel:SEARCHOPTion?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:PIXel:SEARCHOPTion?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:PIXel:SEARCHOPTion valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:PIXel:SEARCHOPTion {PIXELVALue|PIXELNUMBer}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:PIXel:SEARCHOPTion?
Info
PIXELVALuespecifies PIXELVALue as the field within a DPHY frame to search on.PIXELNUMBerspecifies PIXELNUMBer as the field within a DPHY frame to search on.
SearchSearchItemTriggerABusDphyPixelNumber
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:PIXel:NUMBer command.
Description
- This command specifies the pixel number to be used for DPHY triggering if the trigger condition is on pixel number pattern. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:PIXel:NUMBer?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:PIXel:NUMBer?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:PIXel:NUMBer valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:PIXel:NUMBer <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:PIXel:NUMBer?
Info
<NR1>specifies the pixel number. The default pixel number value is 0.
SearchSearchItemTriggerABusDphyPixelSearchoption
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:PIXel:SEARCHOPTion command.
Description
- This command sets or queries the search pattern type for DPHY bus. The default search pattern type value is PIXELVALue.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:PIXel:SEARCHOPTion?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:PIXel:SEARCHOPTion?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:PIXel:SEARCHOPTion valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:PIXel:SEARCHOPTion {PIXELVALue|PIXELNUMBer}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:PIXel:SEARCHOPTion?
Info
PIXELVALuespecifies PIXELVALue as the field within a DPHY frame to search on.PIXELNUMBerspecifies PIXELNUMBer as the field within a DPHY frame to search on.
SearchSearchItemTriggerABusDphyRed
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:RED command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:RED?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:RED?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:RED:VALuecommand.
value
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:RED:VALue command.
Description
- This command specifies the red data string used for DPHY triggering if the trigger condition is on RGB packet.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:RED:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:RED:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:RED:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:RED:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:RED:VALue?
Info
<QString>is the identifier value. The default red value is XXXXXXXXXX.
SearchSearchItemTriggerABusDphyRedValue
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:RED:VALue command.
Description
- This command specifies the red data string used for DPHY triggering if the trigger condition is on RGB packet.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:RED:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:RED:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:RED:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:RED:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:RED:VALue?
Info
<QString>is the identifier value. The default red value is XXXXXXXXXX.
SearchSearchItemTriggerABusDphyWordcount
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:WORDCOUNt command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:WORDCOUNt?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:WORDCOUNt?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:WORDCOUNt:VALuecommand.
value
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:WORDCOUNt:VALue command.
Description
- This command specifies the word count data string used for DPHY triggering if the trigger condition is set on any pixel packet.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:WORDCOUNt:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:WORDCOUNt:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:WORDCOUNt:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:WORDCOUNt:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:WORDCOUNt:VALue?
Info
<QString>is the identifier value. The default word count value is XXXXXXXXXXXXXXXX.
SearchSearchItemTriggerABusDphyWordcountValue
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:WORDCOUNt:VALue command.
Description
- This command specifies the word count data string used for DPHY triggering if the trigger condition is set on any pixel packet.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:WORDCOUNt:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:WORDCOUNt:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:WORDCOUNt:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:WORDCOUNt:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:WORDCOUNt:VALue?
Info
<QString>is the identifier value. The default word count value is XXXXXXXXXXXXXXXX.
SearchSearchItemTriggerABusDphyYcbcr
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:YCBCR command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:YCBCR?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:YCBCR?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.cb: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:YCBCR:CBcommand..cr: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:YCBCR:CRcommand..y: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:YCBCR:Ycommand.
cb
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:YCBCR:CB command.
Description
- This command specifies the Cb data string used for DPHY triggering if the trigger condition is on YCbCr packet.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:YCBCR:CB?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:YCBCR:CB?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:YCBCR:CB valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:YCBCR:CB <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:YCBCR:CB?
Info
<QString>is the identifier value. The default YCBCR packets CB value is XXXXXXXXXX.
cr
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:YCBCR:CR command.
Description
- This command specifies the Cr data string used for DPHY triggering if the trigger condition is on YCbCr packet.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:YCBCR:CR?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:YCBCR:CR?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:YCBCR:CR valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:YCBCR:CR <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:YCBCR:CR?
Info
<QString>is the identifier value. The default YCBCR packets CR value is XXXXXXXXXX.
y
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:YCBCR:Y command.
Description
- This command specifies the Y data string used for DPHY triggering if the trigger condition is on YCbCr packet.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:YCBCR:Y?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:YCBCR:Y?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:YCBCR:Y valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:YCBCR:Y <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:YCBCR:Y?
Info
<QString>is the identifier value. The default YCBCR packets Y value is XXXXXXXXXX.
SearchSearchItemTriggerABusDphyYcbcrCb
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:YCBCR:CB command.
Description
- This command specifies the Cb data string used for DPHY triggering if the trigger condition is on YCbCr packet.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:YCBCR:CB?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:YCBCR:CB?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:YCBCR:CB valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:YCBCR:CB <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:YCBCR:CB?
Info
<QString>is the identifier value. The default YCBCR packets CB value is XXXXXXXXXX.
SearchSearchItemTriggerABusDphyYcbcrCr
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:YCBCR:CR command.
Description
- This command specifies the Cr data string used for DPHY triggering if the trigger condition is on YCbCr packet.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:YCBCR:CR?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:YCBCR:CR?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:YCBCR:CR valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:YCBCR:CR <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:YCBCR:CR?
Info
<QString>is the identifier value. The default YCBCR packets CR value is XXXXXXXXXX.
SearchSearchItemTriggerABusDphyYcbcrY
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:YCBCR:Y command.
Description
- This command specifies the Y data string used for DPHY triggering if the trigger condition is on YCbCr packet.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:YCBCR:Y?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:YCBCR:Y?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:YCBCR:Y valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:YCBCR:Y <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:YCBCR:Y?
Info
<QString>is the identifier value. The default YCBCR packets Y value is XXXXXXXXXX.
SearchSearchItemTriggerABusDphyYuv
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:YUV command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:YUV?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:YUV?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.u: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:YUV:Ucommand..v: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:YUV:Vcommand..y: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:YUV:Ycommand.
u
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:YUV:U command.
Description
- This command specifies the U data string used for DPHY triggering if the trigger condition is on YUV packet.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:YUV:U?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:YUV:U?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:YUV:U valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:YUV:U <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:YUV:U?
Info
<QString>is the identifier value. The default YUV packets U value is XXXXXXXXXX.
v
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:YUV:V command.
Description
- This command specifies the V data string used for DPHY triggering if the trigger condition is on YUV packet.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:YUV:V?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:YUV:V?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:YUV:V valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:YUV:V <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:YUV:V?
Info
<QString>is the identifier value. The default YUV packets V value is XXXXXXXXXX.
y
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:YUV:Y command.
Description
- This command specifies the Y data string used for DPHY triggering if the trigger condition is on YUV packet.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:YUV:Y?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:YUV:Y?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:YUV:Y valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:YUV:Y <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:YUV:Y?
Info
<QString>is the identifier value. The default YUV packets Y value is XXXXXXXXXX.
SearchSearchItemTriggerABusDphyYuvU
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:YUV:U command.
Description
- This command specifies the U data string used for DPHY triggering if the trigger condition is on YUV packet.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:YUV:U?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:YUV:U?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:YUV:U valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:YUV:U <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:YUV:U?
Info
<QString>is the identifier value. The default YUV packets U value is XXXXXXXXXX.
SearchSearchItemTriggerABusDphyYuvV
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:YUV:V command.
Description
- This command specifies the V data string used for DPHY triggering if the trigger condition is on YUV packet.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:YUV:V?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:YUV:V?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:YUV:V valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:YUV:V <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:YUV:V?
Info
<QString>is the identifier value. The default YUV packets V value is XXXXXXXXXX.
SearchSearchItemTriggerABusDphyYuvY
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:YUV:Y command.
Description
- This command specifies the Y data string used for DPHY triggering if the trigger condition is on YUV packet.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:YUV:Y?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:YUV:Y?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:YUV:Y valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:YUV:Y <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:DPHY:YUV:Y?
Info
<QString>is the identifier value. The default YUV packets Y value is XXXXXXXXXX.
SearchSearchItemTriggerABusEspi
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.address: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:ADDResscommand tree..command: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:COMMANDcommand tree..condition: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:CONDitioncommand..cycletype: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:CYCLETYPecommand..data: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:DATacommand tree..error: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:ERRorcommand tree..length: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:LENGthcommand tree..phase: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:PHASecommand..respcycle: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:RESPCYCLEcommand tree..smbus: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:SMBUScommand tree..tag: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:TAGcommand tree..virtualwire: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:VIRTUALWIRecommand tree.
address
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:ADDRess command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:ADDRess?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:ADDRess?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:ADDRess:VALuecommand.
command
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:COMMAND command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:COMMAND?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:COMMAND?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.opcode: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:COMMAND:OPCodecommand.
condition
property
¶
condition: SearchSearchItemTriggerABusEspiCondition
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:CONDition command.
Description
- This command sets or queries the trigger condition for a ESPI bus. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:CONDition?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:CONDition?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:CONDition valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:CONDition {STARt|CHINDependent|PERICHANnel|OOBCHANnel|VWCHANnel|FACHANnel|DATa|STATus|ERRors|WAIT|END}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:CONDition?
Info
STARtspecifies STARt as the event for ESPI frame to search on.CHINDependentspecifies CHINDependent channel for ESPI protocol to search on.PERICHANnelspecifies peripheral channel for ESPI protocol to search on.OOBCHANnelspecifies OOBCHANnel channel for ESPI protocol to search on.VWCHANnelspecifies virtual wire channel for ESPI protocol to search on.FACHANnelspecifies flash channel for ESPI protocol to search on.DATaspecifies DATa as the field within a ESPI frame to search on.STATusspecifies STATus as the field within a ESPI frame to search on.ERRorsspecifies ERRors as the type of error ESPI frame to search on.WAITspecifies WAIT as the field within a ESPI frame to search on.ENDspecifies END as the event for a ESPI frame to search on.
cycletype
property
¶
cycletype: SearchSearchItemTriggerABusEspiCycletype
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:CYCLETYPe command.
Description
- This command sets or queries the cycle type on command in ESPI bus. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:CYCLETYPe?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:CYCLETYPe?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:CYCLETYPe valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:CYCLETYPe {MEMRD32|MEMRD64|MEMWR32|MEMWR64|MESSage|MSGWITHDATa|SUCCESSNODATa|SUCCESSDATa|UNSUCCESSNODATa|OOBSMBUS|MCTP|FLASHREAD|FLASHWRITe|FLASHERASe|FLSUCCESSNODATa|FLSUCCESSDATa|FLUNSUCCESSNODATa}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:CYCLETYPe?
Info
MEMRD32specifies Memory Read 32 as the cycle type to search on.MEMRD64specifies Memory Read 64 as the cycle type to search on.MEMWR32specifies Memory Read Write 32 as the cycle type to search on.MEMWR64specifies Memory Read Write 64 as the cycle type to search on.MESSagespecifies MESSage as the cycle type to search on.MSGWITHDATaspecifies message with Data as the cycle type to search on.SUCCESSNODATaspecifies success without data as the cycle type to search on.SUCCESSDATaspecifies success with data as the cycle type to search on.UNSUCCESSNODATaspecifies unsuccess without data as the cycle type to search on.OOBSMBUSspecifies OOB SMBus as the cycle type to search on.MCTPspecifies MCTP as the cycle type to search on.FLASHREADspecifies FLASHREAD as the cycle type to search on.FLASHWRITespecifies FLASHWRITe as the cycle type to search on.FLASHERASespecifies FLASHERASe as the cycle type to search on.FLSUCCESSNODATaspecifies flash success without data as the cycle type to search on.FLSUCCESSDATaspecifies flash Success with data as the cycle type to search on.FLUNSUCCESSNODATaspecifies flash unsuccess without data as the cycle type to search on.
data
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:DATa command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:DATa?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:DATa?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.size: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:DATa:SIZecommand..value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:DATa:VALuecommand.
error
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:ERRor command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:ERRor?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:ERRor?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.type: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:ERRor:TYPecommand.
length
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:LENGth command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:LENGth?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:LENGth?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:LENGth:VALuecommand.
phase
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:PHASe command.
Description
- This command sets or queries the phase in ESPI bus. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:PHASe?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:PHASe?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:PHASe valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:PHASe {COMMand|RESPONSE|RESPONSEHEADer|RESPONSENOHEADer}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:PHASe?
Info
COMMandspecifies command as the field/packet to search on.RESPONSEspecifies response as the field/packet to search on.RESPONSEHEADerspecifies the response header as the field/packet to search on.RESPONSENOHEADerspecifies the response without header as the field/packet to search on.
respcycle
property
¶
respcycle: SearchSearchItemTriggerABusEspiRespcycle
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:RESPCYCLE command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:RESPCYCLE?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:RESPCYCLE?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.type: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:RESPCYCLE:TYPecommand.
smbus
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:SMBUS command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:SMBUS?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:SMBUS?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.destination: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:SMBUS:DESTinationcommand tree..slave: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:SMBUS:SLAVecommand tree.
tag
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:TAG command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:TAG?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:TAG?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:TAG:VALuecommand.
virtualwire
property
¶
virtualwire: SearchSearchItemTriggerABusEspiVirtualwire
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:VIRTUALWIRe command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:VIRTUALWIRe?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:VIRTUALWIRe?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.count: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:VIRTUALWIRe:COUNtcommand tree..data: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:VIRTUALWIRe:DATacommand tree..index: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:VIRTUALWIRe:INDexcommand tree..response: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:VIRTUALWIRe:RESPonsecommand tree..status: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:VIRTUALWIRe:STATuscommand tree.
SearchSearchItemTriggerABusEspiAddress
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:ADDRess command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:ADDRess?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:ADDRess?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:ADDRess:VALuecommand.
value
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:ADDRess:VALue command.
Description
- This command specifies the binary data string used for ESPI triggering if the trigger condition is Address. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:ADDRess:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:ADDRess:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:ADDRess:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:ADDRess:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:ADDRess:VALue?
Info
<QString>is the identifier value. The default value is XXXXXXXX.
SearchSearchItemTriggerABusEspiAddressValue
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:ADDRess:VALue command.
Description
- This command specifies the binary data string used for ESPI triggering if the trigger condition is Address. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:ADDRess:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:ADDRess:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:ADDRess:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:ADDRess:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:ADDRess:VALue?
Info
<QString>is the identifier value. The default value is XXXXXXXX.
SearchSearchItemTriggerABusEspiCommand
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:COMMAND command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:COMMAND?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:COMMAND?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.opcode: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:COMMAND:OPCodecommand.
opcode
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:COMMAND:OPCode command.
Description
- This command sets or queries the command opcode in ESPI bus. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:COMMAND:OPCode?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:COMMAND:OPCode?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:COMMAND:OPCode valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:COMMAND:OPCode {GETSTATus|GETCONFig|SETCONFig|GETNP|GETPC|PUTNP|PUTPC|PUTIORDSHORt|PUTIOWRSHORt|PUTMEMRD32SHORt|PUTMEMWR32SHORt|PUTOOB|GETOOB|PUTFLASHC|GETFLASHNP|PUTVWIRe|GETVWIRe}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:COMMAND:OPCode?
Info
GETSTATusspecifies get status as the command opcode in ESPI bus to search on.GETCONFigspecifies get configuration as the command opcode in ESPI bus to search on.SETCONFigspecifies set configuration as the command opcode in ESPI bus to search on.GETNPspecifies GETNP as the command opcode in ESPI bus to search on.GETPCspecifies GETPC as the command opcode in ESPI bus to search on.PUTNPspecifies PUTNP as the command opcode in ESPI bus to search on.PUTPCspecifies PUTPC as the command opcode in ESPI bus to search on.PUTIORDSHORtspecifies put IO read short as the command opcode in ESPI bus to search on.PUTIOWRSHORtspecifies put IO write short as the command opcode in ESPI bus to search on.PUTMEMRD32SHORtspecifies put memory read 32 short as the command opcode in ESPI bus to search on.PUTMEMWR32SHORtspecifies put memory write 32 short as the command opcode in ESPI bus to search on.PUTOOBspecifies PUTOOB as the command opcode in ESPI bus to search on.GETOOBspecifies GETOOB as the command opcode in ESPI bus to search on.PUTFLASHCspecifies PUTFLASHC as the command opcode in ESPI bus to search on.GETFLASHNPspecifies GETFLASHNP as the command opcode in ESPI bus to search on.PUTVWIRespecifies put virtual wire as the command opcode in ESPI bus to search on.GETVWIRespecifies get virtual wire as the command opcode in ESPI bus to search on.
SearchSearchItemTriggerABusEspiCommandOpcode
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:COMMAND:OPCode command.
Description
- This command sets or queries the command opcode in ESPI bus. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:COMMAND:OPCode?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:COMMAND:OPCode?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:COMMAND:OPCode valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:COMMAND:OPCode {GETSTATus|GETCONFig|SETCONFig|GETNP|GETPC|PUTNP|PUTPC|PUTIORDSHORt|PUTIOWRSHORt|PUTMEMRD32SHORt|PUTMEMWR32SHORt|PUTOOB|GETOOB|PUTFLASHC|GETFLASHNP|PUTVWIRe|GETVWIRe}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:COMMAND:OPCode?
Info
GETSTATusspecifies get status as the command opcode in ESPI bus to search on.GETCONFigspecifies get configuration as the command opcode in ESPI bus to search on.SETCONFigspecifies set configuration as the command opcode in ESPI bus to search on.GETNPspecifies GETNP as the command opcode in ESPI bus to search on.GETPCspecifies GETPC as the command opcode in ESPI bus to search on.PUTNPspecifies PUTNP as the command opcode in ESPI bus to search on.PUTPCspecifies PUTPC as the command opcode in ESPI bus to search on.PUTIORDSHORtspecifies put IO read short as the command opcode in ESPI bus to search on.PUTIOWRSHORtspecifies put IO write short as the command opcode in ESPI bus to search on.PUTMEMRD32SHORtspecifies put memory read 32 short as the command opcode in ESPI bus to search on.PUTMEMWR32SHORtspecifies put memory write 32 short as the command opcode in ESPI bus to search on.PUTOOBspecifies PUTOOB as the command opcode in ESPI bus to search on.GETOOBspecifies GETOOB as the command opcode in ESPI bus to search on.PUTFLASHCspecifies PUTFLASHC as the command opcode in ESPI bus to search on.GETFLASHNPspecifies GETFLASHNP as the command opcode in ESPI bus to search on.PUTVWIRespecifies put virtual wire as the command opcode in ESPI bus to search on.GETVWIRespecifies get virtual wire as the command opcode in ESPI bus to search on.
SearchSearchItemTriggerABusEspiCondition
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:CONDition command.
Description
- This command sets or queries the trigger condition for a ESPI bus. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:CONDition?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:CONDition?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:CONDition valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:CONDition {STARt|CHINDependent|PERICHANnel|OOBCHANnel|VWCHANnel|FACHANnel|DATa|STATus|ERRors|WAIT|END}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:CONDition?
Info
STARtspecifies STARt as the event for ESPI frame to search on.CHINDependentspecifies CHINDependent channel for ESPI protocol to search on.PERICHANnelspecifies peripheral channel for ESPI protocol to search on.OOBCHANnelspecifies OOBCHANnel channel for ESPI protocol to search on.VWCHANnelspecifies virtual wire channel for ESPI protocol to search on.FACHANnelspecifies flash channel for ESPI protocol to search on.DATaspecifies DATa as the field within a ESPI frame to search on.STATusspecifies STATus as the field within a ESPI frame to search on.ERRorsspecifies ERRors as the type of error ESPI frame to search on.WAITspecifies WAIT as the field within a ESPI frame to search on.ENDspecifies END as the event for a ESPI frame to search on.
SearchSearchItemTriggerABusEspiCycletype
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:CYCLETYPe command.
Description
- This command sets or queries the cycle type on command in ESPI bus. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:CYCLETYPe?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:CYCLETYPe?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:CYCLETYPe valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:CYCLETYPe {MEMRD32|MEMRD64|MEMWR32|MEMWR64|MESSage|MSGWITHDATa|SUCCESSNODATa|SUCCESSDATa|UNSUCCESSNODATa|OOBSMBUS|MCTP|FLASHREAD|FLASHWRITe|FLASHERASe|FLSUCCESSNODATa|FLSUCCESSDATa|FLUNSUCCESSNODATa}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:CYCLETYPe?
Info
MEMRD32specifies Memory Read 32 as the cycle type to search on.MEMRD64specifies Memory Read 64 as the cycle type to search on.MEMWR32specifies Memory Read Write 32 as the cycle type to search on.MEMWR64specifies Memory Read Write 64 as the cycle type to search on.MESSagespecifies MESSage as the cycle type to search on.MSGWITHDATaspecifies message with Data as the cycle type to search on.SUCCESSNODATaspecifies success without data as the cycle type to search on.SUCCESSDATaspecifies success with data as the cycle type to search on.UNSUCCESSNODATaspecifies unsuccess without data as the cycle type to search on.OOBSMBUSspecifies OOB SMBus as the cycle type to search on.MCTPspecifies MCTP as the cycle type to search on.FLASHREADspecifies FLASHREAD as the cycle type to search on.FLASHWRITespecifies FLASHWRITe as the cycle type to search on.FLASHERASespecifies FLASHERASe as the cycle type to search on.FLSUCCESSNODATaspecifies flash success without data as the cycle type to search on.FLSUCCESSDATaspecifies flash Success with data as the cycle type to search on.FLUNSUCCESSNODATaspecifies flash unsuccess without data as the cycle type to search on.
SearchSearchItemTriggerABusEspiData
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:DATa command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:DATa?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:DATa?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.size: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:DATa:SIZecommand..value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:DATa:VALuecommand.
size
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:DATa:SIZe command.
Description
- This command specifies the length of the data string in bytes to be used for ESPI triggering if the trigger condition is DATA. The default data size is 1 byte and ranges between 1 and 5. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:DATa:SIZe?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:DATa:SIZe?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:DATa:SIZe valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:DATa:SIZe <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:DATa:SIZe?
Info
<NR1>specifies the data size. The default data size is 1 and the valid range is 1 to 5.
value
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:DATa:VALue command.
Description
- This command specifies the binary data string used for ESPI triggering if the trigger condition is DATA. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:DATa:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:DATa:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:DATa:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:DATa:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:DATa:VALue?
Info
<QString>is the identifier value. The default value is XXXXXXXX.
SearchSearchItemTriggerABusEspiDataSize
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:DATa:SIZe command.
Description
- This command specifies the length of the data string in bytes to be used for ESPI triggering if the trigger condition is DATA. The default data size is 1 byte and ranges between 1 and 5. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:DATa:SIZe?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:DATa:SIZe?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:DATa:SIZe valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:DATa:SIZe <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:DATa:SIZe?
Info
<NR1>specifies the data size. The default data size is 1 and the valid range is 1 to 5.
SearchSearchItemTriggerABusEspiDataValue
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:DATa:VALue command.
Description
- This command specifies the binary data string used for ESPI triggering if the trigger condition is DATA. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:DATa:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:DATa:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:DATa:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:DATa:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:DATa:VALue?
Info
<QString>is the identifier value. The default value is XXXXXXXX.
SearchSearchItemTriggerABusEspiError
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:ERRor command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:ERRor?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:ERRor?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.type: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:ERRor:TYPecommand.
type
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:ERRor:TYPe command.
Description
- This command sets or queries the error type on command or response in ESPI bus. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:ERRor:TYPe?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:ERRor:TYPe?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:ERRor:TYPe valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:ERRor:TYPe {CRC|DEFer|FATal|NONFATal|NORESPonse|CMDOPCODe|CYCLETYPe}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:ERRor:TYPe?
Info
CRCspecifies CRC as the error type to search on.DEFerspecifies DEFer as the error type to search on.FATalspecifies FATal as the error type to search on.NONFATalspecifies NONFATal as the error type to search on.NORESPonsespecifies NORESPonse as the error type to search on.CMDOPCODespecifies CMDOPCODe as the error type to search on.CYCLETYPespecifies CYCLETYPe as the error type to search on.
SearchSearchItemTriggerABusEspiErrorType
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:ERRor:TYPe command.
Description
- This command sets or queries the error type on command or response in ESPI bus. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:ERRor:TYPe?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:ERRor:TYPe?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:ERRor:TYPe valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:ERRor:TYPe {CRC|DEFer|FATal|NONFATal|NORESPonse|CMDOPCODe|CYCLETYPe}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:ERRor:TYPe?
Info
CRCspecifies CRC as the error type to search on.DEFerspecifies DEFer as the error type to search on.FATalspecifies FATal as the error type to search on.NONFATalspecifies NONFATal as the error type to search on.NORESPonsespecifies NORESPonse as the error type to search on.CMDOPCODespecifies CMDOPCODe as the error type to search on.CYCLETYPespecifies CYCLETYPe as the error type to search on.
SearchSearchItemTriggerABusEspiLength
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:LENGth command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:LENGth?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:LENGth?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:LENGth:VALuecommand.
value
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:LENGth:VALue command.
Description
- This command specifies the binary data string used for ESPI triggering if the trigger condition is Length. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:LENGth:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:LENGth:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:LENGth:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:LENGth:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:LENGth:VALue?
Info
<QString>is the identifier value. The default value is XXXXXXXXXXXX.
SearchSearchItemTriggerABusEspiLengthValue
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:LENGth:VALue command.
Description
- This command specifies the binary data string used for ESPI triggering if the trigger condition is Length. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:LENGth:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:LENGth:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:LENGth:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:LENGth:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:LENGth:VALue?
Info
<QString>is the identifier value. The default value is XXXXXXXXXXXX.
SearchSearchItemTriggerABusEspiPhase
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:PHASe command.
Description
- This command sets or queries the phase in ESPI bus. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:PHASe?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:PHASe?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:PHASe valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:PHASe {COMMand|RESPONSE|RESPONSEHEADer|RESPONSENOHEADer}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:PHASe?
Info
COMMandspecifies command as the field/packet to search on.RESPONSEspecifies response as the field/packet to search on.RESPONSEHEADerspecifies the response header as the field/packet to search on.RESPONSENOHEADerspecifies the response without header as the field/packet to search on.
SearchSearchItemTriggerABusEspiRespcycle
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:RESPCYCLE command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:RESPCYCLE?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:RESPCYCLE?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.type: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:RESPCYCLE:TYPecommand.
type
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:RESPCYCLE:TYPe command.
Description
- This command sets or queries the response cycle type on command in ESPI bus. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:RESPCYCLE:TYPe?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:RESPCYCLE:TYPe?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:RESPCYCLE:TYPe valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:RESPCYCLE:TYPe {MEMRDWR32|MEMRDWR64|MESSage|MSGWITHDATa|SUCCESSNODATa|SUCCESSDATa|UNSUCCESSNODATa|LTR|FLASHREAD|FLASHWRITe|FLASHERASe}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:RESPCYCLE:TYPe?
Info
MEMRDWR32specifies Memory Read/Write 32 as the cycle type to search on.MEMRDWR64specifies Memory Read/Write 64 as the cycle type to search on.MESSagespecifies message as the cycle type to search on.MSGWITHDATaspecifies message with Data as the cycle type to search on.SUCCESSNODATaspecifies success without data as the cycle type to search on.SUCCESSDATaspecifies success with data as the cycle type to search on.UNSUCCESSNODATaspecifies unsuccess without data as the cycle type to search on.LTRspecifies LTR as the cycle type to search on.FLASHREADspecifies flash read as the cycle type to search on.FLASHWRITespecifies flash write as the cycle type to search on.FLASHERASespecifies flash erase as the cycle type to search on.
SearchSearchItemTriggerABusEspiRespcycleType
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:RESPCYCLE:TYPe command.
Description
- This command sets or queries the response cycle type on command in ESPI bus. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:RESPCYCLE:TYPe?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:RESPCYCLE:TYPe?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:RESPCYCLE:TYPe valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:RESPCYCLE:TYPe {MEMRDWR32|MEMRDWR64|MESSage|MSGWITHDATa|SUCCESSNODATa|SUCCESSDATa|UNSUCCESSNODATa|LTR|FLASHREAD|FLASHWRITe|FLASHERASe}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:RESPCYCLE:TYPe?
Info
MEMRDWR32specifies Memory Read/Write 32 as the cycle type to search on.MEMRDWR64specifies Memory Read/Write 64 as the cycle type to search on.MESSagespecifies message as the cycle type to search on.MSGWITHDATaspecifies message with Data as the cycle type to search on.SUCCESSNODATaspecifies success without data as the cycle type to search on.SUCCESSDATaspecifies success with data as the cycle type to search on.UNSUCCESSNODATaspecifies unsuccess without data as the cycle type to search on.LTRspecifies LTR as the cycle type to search on.FLASHREADspecifies flash read as the cycle type to search on.FLASHWRITespecifies flash write as the cycle type to search on.FLASHERASespecifies flash erase as the cycle type to search on.
SearchSearchItemTriggerABusEspiSmbus
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:SMBUS command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:SMBUS?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:SMBUS?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.destination: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:SMBUS:DESTinationcommand tree..slave: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:SMBUS:SLAVecommand tree.
destination
property
¶
destination: SearchSearchItemTriggerABusEspiSmbusDestination
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:SMBUS:DESTination command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:SMBUS:DESTination?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:SMBUS:DESTination?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.address: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:SMBUS:DESTination:ADDResscommand.
slave
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:SMBUS:SLAVe command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:SMBUS:SLAVe?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:SMBUS:SLAVe?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.address: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:SMBUS:SLAVe:ADDResscommand.
SearchSearchItemTriggerABusEspiSmbusDestination
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:SMBUS:DESTination command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:SMBUS:DESTination?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:SMBUS:DESTination?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.address: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:SMBUS:DESTination:ADDResscommand.
address
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:SMBUS:DESTination:ADDRess command.
Description
- This command specifies the binary data string used for ESPI triggering if the trigger condition is SMBus Source/Destination Address. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:SMBUS:DESTination:ADDRess?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:SMBUS:DESTination:ADDRess?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:SMBUS:DESTination:ADDRess valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:SMBUS:DESTination:ADDRess <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:SMBUS:DESTination:ADDRess?
Info
<QString>is the identifier value. The default value is XXXXXXXX.
SearchSearchItemTriggerABusEspiSmbusDestinationAddress
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:SMBUS:DESTination:ADDRess command.
Description
- This command specifies the binary data string used for ESPI triggering if the trigger condition is SMBus Source/Destination Address. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:SMBUS:DESTination:ADDRess?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:SMBUS:DESTination:ADDRess?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:SMBUS:DESTination:ADDRess valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:SMBUS:DESTination:ADDRess <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:SMBUS:DESTination:ADDRess?
Info
<QString>is the identifier value. The default value is XXXXXXXX.
SearchSearchItemTriggerABusEspiSmbusSlave
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:SMBUS:SLAVe command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:SMBUS:SLAVe?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:SMBUS:SLAVe?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.address: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:SMBUS:SLAVe:ADDResscommand.
address
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:SMBUS:SLAVe:ADDRess command.
Description
- This command specifies the binary data string used for ESPI triggering if the trigger condition is SMBus Slave Address. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:SMBUS:SLAVe:ADDRess?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:SMBUS:SLAVe:ADDRess?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:SMBUS:SLAVe:ADDRess valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:SMBUS:SLAVe:ADDRess <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:SMBUS:SLAVe:ADDRess?
Info
<QString>is the identifier value. The default value is XXXXXXXX.
SearchSearchItemTriggerABusEspiSmbusSlaveAddress
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:SMBUS:SLAVe:ADDRess command.
Description
- This command specifies the binary data string used for ESPI triggering if the trigger condition is SMBus Slave Address. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:SMBUS:SLAVe:ADDRess?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:SMBUS:SLAVe:ADDRess?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:SMBUS:SLAVe:ADDRess valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:SMBUS:SLAVe:ADDRess <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:SMBUS:SLAVe:ADDRess?
Info
<QString>is the identifier value. The default value is XXXXXXXX.
SearchSearchItemTriggerABusEspiTag
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:TAG command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:TAG?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:TAG?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:TAG:VALuecommand.
value
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:TAG:VALue command.
Description
- This command specifies the binary data string used for ESPI triggering if the trigger condition is Tag. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:TAG:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:TAG:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:TAG:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:TAG:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:TAG:VALue?
Info
<QString>is the identifier value. The default value is XXXX.
SearchSearchItemTriggerABusEspiTagValue
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:TAG:VALue command.
Description
- This command specifies the binary data string used for ESPI triggering if the trigger condition is Tag. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:TAG:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:TAG:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:TAG:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:TAG:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:TAG:VALue?
Info
<QString>is the identifier value. The default value is XXXX.
SearchSearchItemTriggerABusEspiVirtualwire
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:VIRTUALWIRe command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:VIRTUALWIRe?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:VIRTUALWIRe?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.count: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:VIRTUALWIRe:COUNtcommand tree..data: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:VIRTUALWIRe:DATacommand tree..index: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:VIRTUALWIRe:INDexcommand tree..response: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:VIRTUALWIRe:RESPonsecommand tree..status: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:VIRTUALWIRe:STATuscommand tree.
count
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:VIRTUALWIRe:COUNt command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:VIRTUALWIRe:COUNt?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:VIRTUALWIRe:COUNt?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:VIRTUALWIRe:COUNt:VALuecommand.
data
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:VIRTUALWIRe:DATa command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:VIRTUALWIRe:DATa?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:VIRTUALWIRe:DATa?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:VIRTUALWIRe:DATa:VALuecommand.
index
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:VIRTUALWIRe:INDex command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:VIRTUALWIRe:INDex?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:VIRTUALWIRe:INDex?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:VIRTUALWIRe:INDex:VALuecommand.
response
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:VIRTUALWIRe:RESPonse command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:VIRTUALWIRe:RESPonse?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:VIRTUALWIRe:RESPonse?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:VIRTUALWIRe:RESPonse:VALuecommand.
status
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:VIRTUALWIRe:STATus command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:VIRTUALWIRe:STATus?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:VIRTUALWIRe:STATus?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:VIRTUALWIRe:STATus:VALuecommand.
SearchSearchItemTriggerABusEspiVirtualwireCount
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:VIRTUALWIRe:COUNt command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:VIRTUALWIRe:COUNt?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:VIRTUALWIRe:COUNt?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:VIRTUALWIRe:COUNt:VALuecommand.
value
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:VIRTUALWIRe:COUNt:VALue command.
Description
- This command specifies the binary data string used for ESPI triggering if the trigger condition is Virtual wire count. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:VIRTUALWIRe:COUNt:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:VIRTUALWIRe:COUNt:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:VIRTUALWIRe:COUNt:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:VIRTUALWIRe:COUNt:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:VIRTUALWIRe:COUNt:VALue?
Info
<QString>is the identifier value. The default value is XXXXXXXX.
SearchSearchItemTriggerABusEspiVirtualwireCountValue
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:VIRTUALWIRe:COUNt:VALue command.
Description
- This command specifies the binary data string used for ESPI triggering if the trigger condition is Virtual wire count. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:VIRTUALWIRe:COUNt:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:VIRTUALWIRe:COUNt:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:VIRTUALWIRe:COUNt:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:VIRTUALWIRe:COUNt:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:VIRTUALWIRe:COUNt:VALue?
Info
<QString>is the identifier value. The default value is XXXXXXXX.
SearchSearchItemTriggerABusEspiVirtualwireData
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:VIRTUALWIRe:DATa command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:VIRTUALWIRe:DATa?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:VIRTUALWIRe:DATa?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:VIRTUALWIRe:DATa:VALuecommand.
value
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:VIRTUALWIRe:DATa:VALue command.
Description
- This command specifies the binary data string used for ESPI triggering if the trigger condition is Virtual wire Data. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:VIRTUALWIRe:DATa:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:VIRTUALWIRe:DATa:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:VIRTUALWIRe:DATa:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:VIRTUALWIRe:DATa:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:VIRTUALWIRe:DATa:VALue?
Info
<QString>is the identifier value. The default value is XXXXXXXX.
SearchSearchItemTriggerABusEspiVirtualwireDataValue
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:VIRTUALWIRe:DATa:VALue command.
Description
- This command specifies the binary data string used for ESPI triggering if the trigger condition is Virtual wire Data. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:VIRTUALWIRe:DATa:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:VIRTUALWIRe:DATa:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:VIRTUALWIRe:DATa:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:VIRTUALWIRe:DATa:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:VIRTUALWIRe:DATa:VALue?
Info
<QString>is the identifier value. The default value is XXXXXXXX.
SearchSearchItemTriggerABusEspiVirtualwireIndex
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:VIRTUALWIRe:INDex command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:VIRTUALWIRe:INDex?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:VIRTUALWIRe:INDex?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:VIRTUALWIRe:INDex:VALuecommand.
value
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:VIRTUALWIRe:INDex:VALue command.
Description
- This command specifies the binary data string used for ESPI triggering if the trigger condition is Virtual wire Index. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:VIRTUALWIRe:INDex:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:VIRTUALWIRe:INDex:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:VIRTUALWIRe:INDex:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:VIRTUALWIRe:INDex:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:VIRTUALWIRe:INDex:VALue?
Info
<QString>is the identifier value. The default value is XXXXXXXX.
SearchSearchItemTriggerABusEspiVirtualwireIndexValue
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:VIRTUALWIRe:INDex:VALue command.
Description
- This command specifies the binary data string used for ESPI triggering if the trigger condition is Virtual wire Index. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:VIRTUALWIRe:INDex:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:VIRTUALWIRe:INDex:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:VIRTUALWIRe:INDex:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:VIRTUALWIRe:INDex:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:VIRTUALWIRe:INDex:VALue?
Info
<QString>is the identifier value. The default value is XXXXXXXX.
SearchSearchItemTriggerABusEspiVirtualwireResponse
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:VIRTUALWIRe:RESPonse command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:VIRTUALWIRe:RESPonse?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:VIRTUALWIRe:RESPonse?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:VIRTUALWIRe:RESPonse:VALuecommand.
value
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:VIRTUALWIRe:RESPonse:VALue command.
Description
- This command specifies the binary data string used for ESPI triggering if the trigger condition is Virtual wire Response. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:VIRTUALWIRe:RESPonse:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:VIRTUALWIRe:RESPonse:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:VIRTUALWIRe:RESPonse:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:VIRTUALWIRe:RESPonse:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:VIRTUALWIRe:RESPonse:VALue?
Info
<QString>is the identifier value. The default value is XXXXXXXX.
SearchSearchItemTriggerABusEspiVirtualwireResponseValue
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:VIRTUALWIRe:RESPonse:VALue command.
Description
- This command specifies the binary data string used for ESPI triggering if the trigger condition is Virtual wire Response. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:VIRTUALWIRe:RESPonse:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:VIRTUALWIRe:RESPonse:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:VIRTUALWIRe:RESPonse:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:VIRTUALWIRe:RESPonse:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:VIRTUALWIRe:RESPonse:VALue?
Info
<QString>is the identifier value. The default value is XXXXXXXX.
SearchSearchItemTriggerABusEspiVirtualwireStatus
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:VIRTUALWIRe:STATus command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:VIRTUALWIRe:STATus?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:VIRTUALWIRe:STATus?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:VIRTUALWIRe:STATus:VALuecommand.
value
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:VIRTUALWIRe:STATus:VALue command.
Description
- This command specifies the binary data string used for ESPI triggering if the trigger condition is Virtual wire Status. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:VIRTUALWIRe:STATus:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:VIRTUALWIRe:STATus:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:VIRTUALWIRe:STATus:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:VIRTUALWIRe:STATus:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:VIRTUALWIRe:STATus:VALue?
Info
<QString>is the identifier value. The default value is XXXXXXXXXXXXXXXX.
SearchSearchItemTriggerABusEspiVirtualwireStatusValue
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:VIRTUALWIRe:STATus:VALue command.
Description
- This command specifies the binary data string used for ESPI triggering if the trigger condition is Virtual wire Status. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:VIRTUALWIRe:STATus:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:VIRTUALWIRe:STATus:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:VIRTUALWIRe:STATus:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:VIRTUALWIRe:STATus:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ESPI:VIRTUALWIRe:STATus:VALue?
Info
<QString>is the identifier value. The default value is XXXXXXXXXXXXXXXX.
SearchSearchItemTriggerABusEthercat
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.addressmode: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:ADDRESSMODecommand..cntnv: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:CNTNVcommand tree..commandtype: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:COMMANDTYPecommand..condition: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:CONDitioncommand..cyc: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:CYCcommand tree..datagram: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:DATAGRAMcommand..datagramheader: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:DATAGRAMHEADercommand..data: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:DATacommand tree..destinationaddress: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:DESTINATIONADDResscommand tree..deviceaddress: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:DEVICEADDResscommand..error: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:ERRorcommand tree..frametype: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:FRAMETYPecommand..hash: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:HASHcommand tree..header: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:HEADercommand tree..identification: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:IDENtificationcommand tree..idx: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:IDXcommand tree..index: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:INDexcommand tree..ipdestination: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:IPDESTinationcommand tree..ipsource: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:IPSOURcecommand tree..irq: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:IRQcommand tree..len: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:LENcommand tree..logicaladdress: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:LOGICALADDResscommand tree..mailboxtype: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:MAILBOXTYPecommand..mailbox: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:MAILboxcommand..networkvariable: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:NETWORKVARiablecommand tree..network: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:NETWorkcommand tree..offset: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:OFFSetcommand tree..position: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:POSitioncommand tree..protocoltype: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:PROTOCOLTYPecommand..pubid: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:PUBIDcommand tree..quality: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:QUALitycommand tree..service: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:SERVicecommand tree..sourceaddress: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:SOURCEADDResscommand tree..src: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:SRCcommand tree..tci: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:TCIcommand tree..wkc: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:WKCcommand tree.
addressmode
property
¶
addressmode: SearchSearchItemTriggerABusEthercatAddressmode
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:ADDRESSMODe command.
Description
- This command sets or queries the Address Mode in EtherCAT bus. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:ADDRESSMODe?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:ADDRESSMODe?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:ADDRESSMODe valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:ADDRESSMODe {DEVice|LOGical}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:ADDRESSMODe?
Info
DEVicesets the Address Mode to Device. This is the default value.LOGicalsets the Address Mode to Logical.
cntnv
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:CNTNV command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:CNTNV?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:CNTNV?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:CNTNV:VALuecommand.
commandtype
property
¶
commandtype: SearchSearchItemTriggerABusEthercatCommandtype
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:COMMANDTYPe command.
Description
- This command sets or queries the Command Type in EtherCAT bus. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:COMMANDTYPe?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:COMMANDTYPe?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:COMMANDTYPe valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:COMMANDTYPe {NOP|APRD|APWR|APRW|FPRD|FPWR|FPRW|BRD|BWR|BRW|LRD|LWR|LRW|ARMW|FRMW|REServed}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:COMMANDTYPe?
Info
NOPspecifies the Command Type and sets it to NOP. This is the default value.APRDspecifies the Command Type and sets it to APRD.APWRspecifies the Command Type and sets it to APWR.APRWspecifies the Command Type and sets it to APRW.FPRDspecifies the Command Type and sets it to FPRD.FPWRspecifies the Command Type and sets it to FPWR.FPRWspecifies the Command Type and sets it to FPRW.BRDspecifies the Command Type and sets it to BRD.BWRspecifies the Command Type and sets it to BWR.BRWspecifies the Command Type and sets it to BRW.LRDspecifies the Command Type and sets it to LRD.LWRspecifies the Command Type and sets it to LWR.LRWspecifies the Command Type and sets it to LRW.ARMWspecifies the Command Type and sets it to ARMW.FRMWspecifies the Command Type and sets it to FRMW.REServedspecifies the Command Type and sets it to REServed.
condition
property
¶
condition: SearchSearchItemTriggerABusEthercatCondition
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:CONDition command.
Description
- This command sets or queries the trigger condition for a EtherCAT bus. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:CONDition?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:CONDition?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:CONDition valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:CONDition {SOF|PROTocol|IPHEADer|UDPIPHEADer|MACADDRess|TCI|ECATHEADERLENGth|DATagram|NETWORKVARiable|MAILBOX|FCSERRor|EOF}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:CONDition?
Info
SOFspecifies the field within a EtherCAT frame to search on as SOF. This is the default value.PROTocolspecifies the field within a EtherCAT frame to search on as PROTocol.IPHEADerspecifies the field within a EtherCAT frame to search on as IPHEADer.UDPIPHEADerspecifies the field within a EtherCAT frame to search on as UDPIPHEADer.MACADDRessspecifies the field within a EtherCAT frame to search on as MACADDRess.TCIspecifies the field within a EtherCAT frame to search on as TCI.ECATHEADERLENGthspecifies the field within a EtherCAT frame to search on as ECATHEADERLENGth.DATagramspecifies the field within a EtherCAT frame to search on as DATagram.NETWORKVARiablespecifies the field within a EtherCAT frame to search on as NETWORKVARiable.MAILBOXspecifies the field within a EtherCAT frame to search on as MAILBOX.FCSERRorspecifies the field within a EtherCAT frame to search on as FCSERRor.EOFspecifies the field within a EtherCAT frame to search on as EOF.
cyc
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:CYC command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:CYC?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:CYC?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:CYC:VALuecommand.
data
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:DATa command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:DATa?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:DATa?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.size: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:DATa:SIZecommand..value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:DATa:VALuecommand.
datagram
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:DATAGRAM command.
Description
- This command sets or queries the Datagram fields in EtherCAT bus. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:DATAGRAM?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:DATAGRAM?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:DATAGRAM valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:DATAGRAM {HEADer|DATa|WKC}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:DATAGRAM?
Info
HEADerspecifies the Datagram field and sets it to Header. This is the default value.DATaspecifies the Datagram field and sets it to Data.WKCspecifies the Datagram field and sets it to WKC.
datagramheader
property
¶
datagramheader: SearchSearchItemTriggerABusEthercatDatagramheader
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:DATAGRAMHEADer command.
Description
- This command sets or queries the Datagram Header fields in EtherCAT bus. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:DATAGRAMHEADer?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:DATAGRAMHEADer?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:DATAGRAMHEADer valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:DATAGRAMHEADer {CMD|IDX|ADDRess|LEN|CIRCulating|IRQ}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:DATAGRAMHEADer?
Info
CMDspecifies the Datagram Header field as CMD. This is the default value.IDXspecifies the Datagram Header field as IDX.ADDRessspecifies the Datagram Header field as ADDRess.LENspecifies the Datagram Header field as LEN.CIRCulatingspecifies the Datagram Header field as CIRCulating.IRQspecifies the Datagram Header field as IRQ.
Sub-properties
.length: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:DATAGRAMHEADer:LENGthcommand.
destinationaddress
property
¶
destinationaddress: SearchSearchItemTriggerABusEthercatDestinationaddress
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:DESTINATIONADDRess command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:DESTINATIONADDRess?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:DESTINATIONADDRess?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:DESTINATIONADDRess:VALuecommand.
deviceaddress
property
¶
deviceaddress: SearchSearchItemTriggerABusEthercatDeviceaddress
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:DEVICEADDRess command.
Description
- This command sets or queries the Device Address in EtherCAT bus. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:DEVICEADDRess?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:DEVICEADDRess?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:DEVICEADDRess valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:DEVICEADDRess {POSition|OFFSet}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:DEVICEADDRess?
Info
POSitionspecifies the Device Address to position. This is the default value.OFFSetspecifies the Device Address to offset.
error
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:ERRor command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:ERRor?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:ERRor?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.reply: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:ERRor:REPLycommand tree.
frametype
property
¶
frametype: SearchSearchItemTriggerABusEthercatFrametype
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:FRAMETYPe command.
Description
- This command sets or queries the Frame Type in EtherCAT bus. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:FRAMETYPe?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:FRAMETYPe?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:FRAMETYPe valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:FRAMETYPe {BASic|UDPIP}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:FRAMETYPe?
Info
BASicspecifies the Frame Type as BASic. This is the default value.UDPIPspecifies the Frame Type as UDPIP.
hash
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:HASH command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:HASH?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:HASH?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:HASH:VALuecommand.
header
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:HEADer command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:HEADer?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:HEADer?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.length: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:HEADer:LENGthcommand.
identification
property
¶
identification: SearchSearchItemTriggerABusEthercatIdentification
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:IDENtification command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:IDENtification?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:IDENtification?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:IDENtification:VALuecommand.
idx
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:IDX command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:IDX?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:IDX?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:IDX:VALuecommand.
index
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:INDex command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:INDex?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:INDex?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:INDex:VALuecommand.
ipdestination
property
¶
ipdestination: SearchSearchItemTriggerABusEthercatIpdestination
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:IPDESTination command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:IPDESTination?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:IPDESTination?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.address: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:IPDESTination:ADDResscommand tree.
ipsource
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:IPSOURce command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:IPSOURce?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:IPSOURce?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.address: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:IPSOURce:ADDResscommand tree.
irq
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:IRQ command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:IRQ?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:IRQ?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:IRQ:VALuecommand.
len
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:LEN command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:LEN?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:LEN?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:LEN:VALuecommand.
logicaladdress
property
¶
logicaladdress: SearchSearchItemTriggerABusEthercatLogicaladdress
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:LOGICALADDRess command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:LOGICALADDRess?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:LOGICALADDRess?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:LOGICALADDRess:VALuecommand.
mailbox
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:MAILbox command.
Description
- This command sets or queries the Mailbox fields in EtherCAT bus. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:MAILbox?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:MAILbox?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:MAILbox valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:MAILbox {MAILBOXHEADer|SERVICEDATa|ERRSERVICEDATa}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:MAILbox?
Info
MAILBOXHEADerspecifies the Mailbox fields as mailbox header. This is the default value.SERVICEDATaspecifies the Mailbox fields as service data.ERRSERVICEDATaspecifies the Mailbox fields as error reply service data.
Sub-properties
.address: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:MAILbox:ADDResscommand tree..cnt: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:MAILbox:CNTcommand tree..detail: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:MAILbox:DETailcommand..header: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:MAILbox:HEADercommand.
mailboxtype
property
¶
mailboxtype: SearchSearchItemTriggerABusEthercatMailboxtype
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:MAILBOXTYPe command.
Description
- This command sets or queries the Mailbox Type fields in EtherCAT bus. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:MAILBOXTYPe?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:MAILBOXTYPe?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:MAILBOXTYPe valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:MAILBOXTYPe {ZERo|ONE|TWO|THRee|FOUR|FIVe|RESERved|FIFTeen}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:MAILBOXTYPe?
Info
ZERospecifies the Mailbox Type as ZERo. This is the default value.ONEspecifies the Mailbox Type as ONE.TWOspecifies the Mailbox Type as TWO.THReespecifies the Mailbox Type as THRee.FOURspecifies the Mailbox Type as FOUR.FIVespecifies the Mailbox Type as FIVe.RESERvedspecifies the Mailbox Type as RESERved.FIFTeenspecifies the Mailbox Type as FIFTeen.
network
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:NETWork command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:NETWork?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:NETWork?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.variable: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:NETWork:VARiablecommand.
networkvariable
property
¶
networkvariable: SearchSearchItemTriggerABusEthercatNetworkvariable
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:NETWORKVARiable command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:NETWORKVARiable?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:NETWORKVARiable?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.data: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:NETWORKVARiable:DATacommand tree.
offset
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:OFFSet command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:OFFSet?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:OFFSet?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:OFFSet:VALuecommand.
position
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:POSition command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:POSition?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:POSition?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:POSition:VALuecommand.
protocoltype
property
¶
protocoltype: SearchSearchItemTriggerABusEthercatProtocoltype
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:PROTOCOLTYPe command.
Description
- This command sets or queries the EtherCAT Protocol Type in EtherCAT bus. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:PROTOCOLTYPe?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:PROTOCOLTYPe?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:PROTOCOLTYPe valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:PROTOCOLTYPe {PDU|NETWORKVARiables|MAILbox}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:PROTOCOLTYPe?
Info
PDUspecifies the Protocol Type as PDU. This is the default value.NETWORKVARiablesspecifies the Protocol Type as NETWORKVARiables.MAILboxspecifies the Protocol Type as MAILbox.
pubid
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:PUBID command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:PUBID?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:PUBID?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:PUBID:VALuecommand.
quality
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:QUALity command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:QUALity?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:QUALity?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:QUALity:VALuecommand.
service
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:SERVice command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:SERVice?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:SERVice?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.data: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:SERVice:DATacommand tree.
sourceaddress
property
¶
sourceaddress: SearchSearchItemTriggerABusEthercatSourceaddress
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:SOURCEADDRess command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:SOURCEADDRess?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:SOURCEADDRess?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:SOURCEADDRess:VALuecommand.
src
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:SRC command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:SRC?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:SRC?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.port: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:SRC:PORTcommand tree.
tci
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:TCI command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:TCI?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:TCI?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:TCI:VALuecommand.
wkc
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:WKC command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:WKC?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:WKC?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:WKC:VALuecommand.
SearchSearchItemTriggerABusEthercatAddressmode
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:ADDRESSMODe command.
Description
- This command sets or queries the Address Mode in EtherCAT bus. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:ADDRESSMODe?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:ADDRESSMODe?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:ADDRESSMODe valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:ADDRESSMODe {DEVice|LOGical}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:ADDRESSMODe?
Info
DEVicesets the Address Mode to Device. This is the default value.LOGicalsets the Address Mode to Logical.
SearchSearchItemTriggerABusEthercatCntnv
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:CNTNV command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:CNTNV?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:CNTNV?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:CNTNV:VALuecommand.
value
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:CNTNV:VALue command.
Description
- This command sets the binary Network Variable Count to be used for EtherCAT bus. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:CNTNV:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:CNTNV:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:CNTNV:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:CNTNV:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:CNTNV:VALue?
Info
<QString>is the binary Network Variable Count to be used when searching on an EtherCAT bus signal. The default size and value of Network Variable Count is 16 bits and ‘XXXXXXXX XXXXXXXX’ respectively.
SearchSearchItemTriggerABusEthercatCntnvValue
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:CNTNV:VALue command.
Description
- This command sets the binary Network Variable Count to be used for EtherCAT bus. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:CNTNV:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:CNTNV:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:CNTNV:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:CNTNV:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:CNTNV:VALue?
Info
<QString>is the binary Network Variable Count to be used when searching on an EtherCAT bus signal. The default size and value of Network Variable Count is 16 bits and ‘XXXXXXXX XXXXXXXX’ respectively.
SearchSearchItemTriggerABusEthercatCommandtype
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:COMMANDTYPe command.
Description
- This command sets or queries the Command Type in EtherCAT bus. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:COMMANDTYPe?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:COMMANDTYPe?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:COMMANDTYPe valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:COMMANDTYPe {NOP|APRD|APWR|APRW|FPRD|FPWR|FPRW|BRD|BWR|BRW|LRD|LWR|LRW|ARMW|FRMW|REServed}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:COMMANDTYPe?
Info
NOPspecifies the Command Type and sets it to NOP. This is the default value.APRDspecifies the Command Type and sets it to APRD.APWRspecifies the Command Type and sets it to APWR.APRWspecifies the Command Type and sets it to APRW.FPRDspecifies the Command Type and sets it to FPRD.FPWRspecifies the Command Type and sets it to FPWR.FPRWspecifies the Command Type and sets it to FPRW.BRDspecifies the Command Type and sets it to BRD.BWRspecifies the Command Type and sets it to BWR.BRWspecifies the Command Type and sets it to BRW.LRDspecifies the Command Type and sets it to LRD.LWRspecifies the Command Type and sets it to LWR.LRWspecifies the Command Type and sets it to LRW.ARMWspecifies the Command Type and sets it to ARMW.FRMWspecifies the Command Type and sets it to FRMW.REServedspecifies the Command Type and sets it to REServed.
SearchSearchItemTriggerABusEthercatCondition
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:CONDition command.
Description
- This command sets or queries the trigger condition for a EtherCAT bus. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:CONDition?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:CONDition?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:CONDition valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:CONDition {SOF|PROTocol|IPHEADer|UDPIPHEADer|MACADDRess|TCI|ECATHEADERLENGth|DATagram|NETWORKVARiable|MAILBOX|FCSERRor|EOF}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:CONDition?
Info
SOFspecifies the field within a EtherCAT frame to search on as SOF. This is the default value.PROTocolspecifies the field within a EtherCAT frame to search on as PROTocol.IPHEADerspecifies the field within a EtherCAT frame to search on as IPHEADer.UDPIPHEADerspecifies the field within a EtherCAT frame to search on as UDPIPHEADer.MACADDRessspecifies the field within a EtherCAT frame to search on as MACADDRess.TCIspecifies the field within a EtherCAT frame to search on as TCI.ECATHEADERLENGthspecifies the field within a EtherCAT frame to search on as ECATHEADERLENGth.DATagramspecifies the field within a EtherCAT frame to search on as DATagram.NETWORKVARiablespecifies the field within a EtherCAT frame to search on as NETWORKVARiable.MAILBOXspecifies the field within a EtherCAT frame to search on as MAILBOX.FCSERRorspecifies the field within a EtherCAT frame to search on as FCSERRor.EOFspecifies the field within a EtherCAT frame to search on as EOF.
SearchSearchItemTriggerABusEthercatCyc
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:CYC command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:CYC?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:CYC?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:CYC:VALuecommand.
value
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:CYC:VALue command.
Description
- This command sets the binary Cycle Number to be used for EtherCAT bus. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:CYC:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:CYC:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:CYC:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:CYC:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:CYC:VALue?
Info
<QString>is the binary Cycle Number to be used when searching on an EtherCAT bus signal. The default size and value of Network Variable Count is 16 bits and ‘XXXXXXXX XXXXXXXX’ respectively.
SearchSearchItemTriggerABusEthercatCycValue
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:CYC:VALue command.
Description
- This command sets the binary Cycle Number to be used for EtherCAT bus. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:CYC:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:CYC:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:CYC:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:CYC:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:CYC:VALue?
Info
<QString>is the binary Cycle Number to be used when searching on an EtherCAT bus signal. The default size and value of Network Variable Count is 16 bits and ‘XXXXXXXX XXXXXXXX’ respectively.
SearchSearchItemTriggerABusEthercatData
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:DATa command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:DATa?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:DATa?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.size: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:DATa:SIZecommand..value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:DATa:VALuecommand.
size
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:DATa:SIZe command.
Description
- This command specifies the length of the data string in bytes to be used for EtherCAT bus. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:DATa:SIZe?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:DATa:SIZe?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:DATa:SIZe valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:DATa:SIZe <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:DATa:SIZe?
Info
<NR1>is the binary data value to be used when searching on an Ethernet bus signal. The default size is 1. The valid range is 1 to 5.
value
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:DATa:VALue command.
Description
- This command specifies the binary data string used for EtherCAT bus. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:DATa:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:DATa:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:DATa:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:DATa:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:DATa:VALue?
Info
<QString>is the binary Cycle Number to be used when searching on an EtherCAT bus signal. The default data size and value is 8 bits and ‘XXXXXXXX’ respectively.
SearchSearchItemTriggerABusEthercatDataSize
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:DATa:SIZe command.
Description
- This command specifies the length of the data string in bytes to be used for EtherCAT bus. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:DATa:SIZe?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:DATa:SIZe?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:DATa:SIZe valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:DATa:SIZe <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:DATa:SIZe?
Info
<NR1>is the binary data value to be used when searching on an Ethernet bus signal. The default size is 1. The valid range is 1 to 5.
SearchSearchItemTriggerABusEthercatDataValue
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:DATa:VALue command.
Description
- This command specifies the binary data string used for EtherCAT bus. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:DATa:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:DATa:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:DATa:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:DATa:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:DATa:VALue?
Info
<QString>is the binary Cycle Number to be used when searching on an EtherCAT bus signal. The default data size and value is 8 bits and ‘XXXXXXXX’ respectively.
SearchSearchItemTriggerABusEthercatDatagram
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:DATAGRAM command.
Description
- This command sets or queries the Datagram fields in EtherCAT bus. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:DATAGRAM?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:DATAGRAM?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:DATAGRAM valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:DATAGRAM {HEADer|DATa|WKC}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:DATAGRAM?
Info
HEADerspecifies the Datagram field and sets it to Header. This is the default value.DATaspecifies the Datagram field and sets it to Data.WKCspecifies the Datagram field and sets it to WKC.
SearchSearchItemTriggerABusEthercatDatagramheader
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:DATAGRAMHEADer command.
Description
- This command sets or queries the Datagram Header fields in EtherCAT bus. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:DATAGRAMHEADer?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:DATAGRAMHEADer?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:DATAGRAMHEADer valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:DATAGRAMHEADer {CMD|IDX|ADDRess|LEN|CIRCulating|IRQ}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:DATAGRAMHEADer?
Info
CMDspecifies the Datagram Header field as CMD. This is the default value.IDXspecifies the Datagram Header field as IDX.ADDRessspecifies the Datagram Header field as ADDRess.LENspecifies the Datagram Header field as LEN.CIRCulatingspecifies the Datagram Header field as CIRCulating.IRQspecifies the Datagram Header field as IRQ.
Properties
.length: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:DATAGRAMHEADer:LENGthcommand.
length
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:DATAGRAMHEADer:LENGth command.
Description
- This command sets the binary Datagram length information to be used for EtherCAT bus. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:DATAGRAMHEADer:LENGth?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:DATAGRAMHEADer:LENGth?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:DATAGRAMHEADer:LENGth valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:DATAGRAMHEADer:LENGth <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:DATAGRAMHEADer:LENGth?
Info
<QString>is the binary Datagram length information to be used when searching on an EtherCAT bus signal. The default size and value Datagram length information is 11 bits and ‘XXXXXXXX XXX’ respectively.
SearchSearchItemTriggerABusEthercatDatagramheaderLength
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:DATAGRAMHEADer:LENGth command.
Description
- This command sets the binary Datagram length information to be used for EtherCAT bus. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:DATAGRAMHEADer:LENGth?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:DATAGRAMHEADer:LENGth?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:DATAGRAMHEADer:LENGth valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:DATAGRAMHEADer:LENGth <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:DATAGRAMHEADer:LENGth?
Info
<QString>is the binary Datagram length information to be used when searching on an EtherCAT bus signal. The default size and value Datagram length information is 11 bits and ‘XXXXXXXX XXX’ respectively.
SearchSearchItemTriggerABusEthercatDestinationaddress
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:DESTINATIONADDRess command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:DESTINATIONADDRess?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:DESTINATIONADDRess?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:DESTINATIONADDRess:VALuecommand.
value
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:DESTINATIONADDRess:VALue command.
Description
- This command sets the binary MAC destination address value to be used for EtherCAT bus. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:DESTINATIONADDRess:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:DESTINATIONADDRess:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:DESTINATIONADDRess:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:DESTINATIONADDRess:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:DESTINATIONADDRess:VALue?
Info
<QString>is the binary MAC destination address value to be used when searching on an EtherCAT bus signal. The default size and value of MAC Destination Address is 48 bits and ‘XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX’ respectively.
SearchSearchItemTriggerABusEthercatDestinationaddressValue
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:DESTINATIONADDRess:VALue command.
Description
- This command sets the binary MAC destination address value to be used for EtherCAT bus. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:DESTINATIONADDRess:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:DESTINATIONADDRess:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:DESTINATIONADDRess:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:DESTINATIONADDRess:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:DESTINATIONADDRess:VALue?
Info
<QString>is the binary MAC destination address value to be used when searching on an EtherCAT bus signal. The default size and value of MAC Destination Address is 48 bits and ‘XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX’ respectively.
SearchSearchItemTriggerABusEthercatDeviceaddress
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:DEVICEADDRess command.
Description
- This command sets or queries the Device Address in EtherCAT bus. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:DEVICEADDRess?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:DEVICEADDRess?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:DEVICEADDRess valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:DEVICEADDRess {POSition|OFFSet}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:DEVICEADDRess?
Info
POSitionspecifies the Device Address to position. This is the default value.OFFSetspecifies the Device Address to offset.
SearchSearchItemTriggerABusEthercatError
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:ERRor command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:ERRor?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:ERRor?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.reply: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:ERRor:REPLycommand tree.
reply
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:ERRor:REPLy command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:ERRor:REPLy?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:ERRor:REPLy?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.service: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:ERRor:REPLy:SERVicecommand tree.
SearchSearchItemTriggerABusEthercatErrorReply
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:ERRor:REPLy command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:ERRor:REPLy?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:ERRor:REPLy?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.service: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:ERRor:REPLy:SERVicecommand tree.
service
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:ERRor:REPLy:SERVice command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:ERRor:REPLy:SERVice?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:ERRor:REPLy:SERVice?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.data: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:ERRor:REPLy:SERVice:DATacommand.
SearchSearchItemTriggerABusEthercatErrorReplyService
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:ERRor:REPLy:SERVice command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:ERRor:REPLy:SERVice?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:ERRor:REPLy:SERVice?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.data: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:ERRor:REPLy:SERVice:DATacommand.
data
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:ERRor:REPLy:SERVice:DATa command.
Description
- This command sets or queries the error reply service data fields in EtherCAT bus. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:ERRor:REPLy:SERVice:DATa?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:ERRor:REPLy:SERVice:DATa?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:ERRor:REPLy:SERVice:DATa valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:ERRor:REPLy:SERVice:DATa {TYPe|DETail}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:ERRor:REPLy:SERVice:DATa?
Info
TYPespecifies the Error Reply Service Data to type. This is the default value.DETailspecifies the Error Reply Service Data to detail.
SearchSearchItemTriggerABusEthercatErrorReplyServiceData
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:ERRor:REPLy:SERVice:DATa command.
Description
- This command sets or queries the error reply service data fields in EtherCAT bus. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:ERRor:REPLy:SERVice:DATa?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:ERRor:REPLy:SERVice:DATa?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:ERRor:REPLy:SERVice:DATa valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:ERRor:REPLy:SERVice:DATa {TYPe|DETail}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:ERRor:REPLy:SERVice:DATa?
Info
TYPespecifies the Error Reply Service Data to type. This is the default value.DETailspecifies the Error Reply Service Data to detail.
SearchSearchItemTriggerABusEthercatFrametype
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:FRAMETYPe command.
Description
- This command sets or queries the Frame Type in EtherCAT bus. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:FRAMETYPe?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:FRAMETYPe?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:FRAMETYPe valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:FRAMETYPe {BASic|UDPIP}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:FRAMETYPe?
Info
BASicspecifies the Frame Type as BASic. This is the default value.UDPIPspecifies the Frame Type as UDPIP.
SearchSearchItemTriggerABusEthercatHash
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:HASH command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:HASH?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:HASH?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:HASH:VALuecommand.
value
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:HASH:VALue command.
Description
- This command sets the binary HASH to be used for EtherCAT bus. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:HASH:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:HASH:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:HASH:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:HASH:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:HASH:VALue?
Info
<QString>is the binary Hash value to be used when searching on an EtherCAT bus signal. The default size and value of Hash is 16 bits and ‘XXXXXXXX XXXXXXXX’ respectively.
SearchSearchItemTriggerABusEthercatHashValue
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:HASH:VALue command.
Description
- This command sets the binary HASH to be used for EtherCAT bus. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:HASH:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:HASH:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:HASH:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:HASH:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:HASH:VALue?
Info
<QString>is the binary Hash value to be used when searching on an EtherCAT bus signal. The default size and value of Hash is 16 bits and ‘XXXXXXXX XXXXXXXX’ respectively.
SearchSearchItemTriggerABusEthercatHeader
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:HEADer command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:HEADer?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:HEADer?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.length: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:HEADer:LENGthcommand.
length
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:HEADer:LENGth command.
Description
- This command sets or queries the binary header length to be used for EtherCAT bus. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:HEADer:LENGth?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:HEADer:LENGth?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:HEADer:LENGth valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:HEADer:LENGth <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:HEADer:LENGth?
Info
<QString>is the binary header length to be used when searching on an EtherCAT bus signal. The default size and value of Length is 11 bits and ‘XXX XXXXXXXX’ respectively.
SearchSearchItemTriggerABusEthercatHeaderLength
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:HEADer:LENGth command.
Description
- This command sets or queries the binary header length to be used for EtherCAT bus. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:HEADer:LENGth?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:HEADer:LENGth?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:HEADer:LENGth valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:HEADer:LENGth <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:HEADer:LENGth?
Info
<QString>is the binary header length to be used when searching on an EtherCAT bus signal. The default size and value of Length is 11 bits and ‘XXX XXXXXXXX’ respectively.
SearchSearchItemTriggerABusEthercatIdentification
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:IDENtification command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:IDENtification?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:IDENtification?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:IDENtification:VALuecommand.
value
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:IDENtification:VALue command.
Description
- This command sets the IP Identification to be used for EtherCAT bus. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:IDENtification:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:IDENtification:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:IDENtification:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:IDENtification:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:IDENtification:VALue?
Info
<QString>is the binary IP Identification to be used when searching on an EtherCAT bus signal. The default size and value of Identification is 16 bits and ‘XXXXXXXX XXXXXXXX’ respectively.
SearchSearchItemTriggerABusEthercatIdentificationValue
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:IDENtification:VALue command.
Description
- This command sets the IP Identification to be used for EtherCAT bus. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:IDENtification:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:IDENtification:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:IDENtification:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:IDENtification:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:IDENtification:VALue?
Info
<QString>is the binary IP Identification to be used when searching on an EtherCAT bus signal. The default size and value of Identification is 16 bits and ‘XXXXXXXX XXXXXXXX’ respectively.
SearchSearchItemTriggerABusEthercatIdx
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:IDX command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:IDX?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:IDX?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:IDX:VALuecommand.
value
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:IDX:VALue command.
Description
- This command sets the binary Indexing information to be used for EtherCAT bus. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:IDX:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:IDX:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:IDX:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:IDX:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:IDX:VALue?
Info
<QString>is the binary Index value to be used when searching on an EtherCAT bus signal. The default size and value of Index is 8 bits and ‘XXXXXXXX’ respectively.
SearchSearchItemTriggerABusEthercatIdxValue
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:IDX:VALue command.
Description
- This command sets the binary Indexing information to be used for EtherCAT bus. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:IDX:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:IDX:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:IDX:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:IDX:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:IDX:VALue?
Info
<QString>is the binary Index value to be used when searching on an EtherCAT bus signal. The default size and value of Index is 8 bits and ‘XXXXXXXX’ respectively.
SearchSearchItemTriggerABusEthercatIndex
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:INDex command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:INDex?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:INDex?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:INDex:VALuecommand.
value
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:INDex:VALue command.
Description
- This command sets the binary Index to be used for EtherCAT bus. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:INDex:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:INDex:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:INDex:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:INDex:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:INDex:VALue?
Info
<QString>is the binary Index to be used when searching on an EtherCAT bus signal. The default size and value of Index is 16 bits and ‘XXXXXXXX XXXXXXXX’ respectively.
SearchSearchItemTriggerABusEthercatIndexValue
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:INDex:VALue command.
Description
- This command sets the binary Index to be used for EtherCAT bus. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:INDex:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:INDex:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:INDex:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:INDex:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:INDex:VALue?
Info
<QString>is the binary Index to be used when searching on an EtherCAT bus signal. The default size and value of Index is 16 bits and ‘XXXXXXXX XXXXXXXX’ respectively.
SearchSearchItemTriggerABusEthercatIpdestination
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:IPDESTination command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:IPDESTination?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:IPDESTination?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.address: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:IPDESTination:ADDResscommand tree.
address
property
¶
SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:IPDESTination:ADDRess command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:IPDESTination:ADDRess?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:IPDESTination:ADDRess?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:IPDESTination:ADDRess:VALuecommand.
SearchSearchItemTriggerABusEthercatIpdestinationAddress
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:IPDESTination:ADDRess command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:IPDESTination:ADDRess?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:IPDESTination:ADDRess?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:IPDESTination:ADDRess:VALuecommand.
value
property
¶
SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:IPDESTination:ADDRess:VALue command.
Description
- This command sets the Destination IP Address to be used for EtherCAT bus. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:IPDESTination:ADDRess:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:IPDESTination:ADDRess:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:IPDESTination:ADDRess:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:IPDESTination:ADDRess:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:IPDESTination:ADDRess:VALue?
Info
<QString>is the binary Destination IP Address to be used when searching on an EtherCAT bus signal. The default size and value of Destination Address is 32 bits and ‘XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX’.
SearchSearchItemTriggerABusEthercatIpdestinationAddressValue
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:IPDESTination:ADDRess:VALue command.
Description
- This command sets the Destination IP Address to be used for EtherCAT bus. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:IPDESTination:ADDRess:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:IPDESTination:ADDRess:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:IPDESTination:ADDRess:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:IPDESTination:ADDRess:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:IPDESTination:ADDRess:VALue?
Info
<QString>is the binary Destination IP Address to be used when searching on an EtherCAT bus signal. The default size and value of Destination Address is 32 bits and ‘XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX’.
SearchSearchItemTriggerABusEthercatIpsource
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:IPSOURce command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:IPSOURce?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:IPSOURce?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.address: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:IPSOURce:ADDResscommand tree.
address
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:IPSOURce:ADDRess command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:IPSOURce:ADDRess?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:IPSOURce:ADDRess?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:IPSOURce:ADDRess:VALuecommand.
SearchSearchItemTriggerABusEthercatIpsourceAddress
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:IPSOURce:ADDRess command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:IPSOURce:ADDRess?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:IPSOURce:ADDRess?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:IPSOURce:ADDRess:VALuecommand.
value
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:IPSOURce:ADDRess:VALue command.
Description
- This command sets the Source IP Address to be used for EtherCAT bus. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:IPSOURce:ADDRess:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:IPSOURce:ADDRess:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:IPSOURce:ADDRess:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:IPSOURce:ADDRess:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:IPSOURce:ADDRess:VALue?
Info
<QString>is the binary Source IP Address to be used when searching on an EtherCAT bus signal. The default size and value of Source Address is 32 bits and ‘XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX’.
SearchSearchItemTriggerABusEthercatIpsourceAddressValue
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:IPSOURce:ADDRess:VALue command.
Description
- This command sets the Source IP Address to be used for EtherCAT bus. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:IPSOURce:ADDRess:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:IPSOURce:ADDRess:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:IPSOURce:ADDRess:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:IPSOURce:ADDRess:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:IPSOURce:ADDRess:VALue?
Info
<QString>is the binary Source IP Address to be used when searching on an EtherCAT bus signal. The default size and value of Source Address is 32 bits and ‘XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX’.
SearchSearchItemTriggerABusEthercatIrq
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:IRQ command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:IRQ?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:IRQ?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:IRQ:VALuecommand.
value
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:IRQ:VALue command.
Description
- This command sets the binary interrupt request information to be used for EtherCAT bus. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:IRQ:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:IRQ:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:IRQ:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:IRQ:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:IRQ:VALue?
Info
<QString>is the binary interrupt request information to be used when searching on an EtherCAT bus signal. The default size and value interrupt request information is 16 bits and ‘XXXXXXXX XXXXXXXX’ respectively.
SearchSearchItemTriggerABusEthercatIrqValue
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:IRQ:VALue command.
Description
- This command sets the binary interrupt request information to be used for EtherCAT bus. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:IRQ:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:IRQ:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:IRQ:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:IRQ:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:IRQ:VALue?
Info
<QString>is the binary interrupt request information to be used when searching on an EtherCAT bus signal. The default size and value interrupt request information is 16 bits and ‘XXXXXXXX XXXXXXXX’ respectively.
SearchSearchItemTriggerABusEthercatLen
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:LEN command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:LEN?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:LEN?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:LEN:VALuecommand.
value
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:LEN:VALue command.
Description
- This command sets the binary Length to be used for EtherCAT bus. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:LEN:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:LEN:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:LEN:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:LEN:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:LEN:VALue?
Info
<QString>is the binary Length to be used when searching on an EtherCAT bus signal. The default size and value of Length is 16 bits and ‘XXXXXXXX XXXXXXXX’ respectively.
SearchSearchItemTriggerABusEthercatLenValue
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:LEN:VALue command.
Description
- This command sets the binary Length to be used for EtherCAT bus. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:LEN:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:LEN:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:LEN:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:LEN:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:LEN:VALue?
Info
<QString>is the binary Length to be used when searching on an EtherCAT bus signal. The default size and value of Length is 16 bits and ‘XXXXXXXX XXXXXXXX’ respectively.
SearchSearchItemTriggerABusEthercatLogicaladdress
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:LOGICALADDRess command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:LOGICALADDRess?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:LOGICALADDRess?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:LOGICALADDRess:VALuecommand.
value
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:LOGICALADDRess:VALue command.
Description
- This command sets the binary logical address information to be used for EtherCAT bus. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:LOGICALADDRess:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:LOGICALADDRess:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:LOGICALADDRess:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:LOGICALADDRess:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:LOGICALADDRess:VALue?
Info
<QString>is the binary Logical Address to be used when searching on an EtherCAT bus signal. The default size and value Logical Address is 32 bits and ‘XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX’ respectively.
SearchSearchItemTriggerABusEthercatLogicaladdressValue
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:LOGICALADDRess:VALue command.
Description
- This command sets the binary logical address information to be used for EtherCAT bus. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:LOGICALADDRess:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:LOGICALADDRess:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:LOGICALADDRess:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:LOGICALADDRess:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:LOGICALADDRess:VALue?
Info
<QString>is the binary Logical Address to be used when searching on an EtherCAT bus signal. The default size and value Logical Address is 32 bits and ‘XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX’ respectively.
SearchSearchItemTriggerABusEthercatMailbox
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:MAILbox command.
Description
- This command sets or queries the Mailbox fields in EtherCAT bus. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:MAILbox?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:MAILbox?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:MAILbox valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:MAILbox {MAILBOXHEADer|SERVICEDATa|ERRSERVICEDATa}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:MAILbox?
Info
MAILBOXHEADerspecifies the Mailbox fields as mailbox header. This is the default value.SERVICEDATaspecifies the Mailbox fields as service data.ERRSERVICEDATaspecifies the Mailbox fields as error reply service data.
Properties
.address: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:MAILbox:ADDResscommand tree..cnt: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:MAILbox:CNTcommand tree..detail: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:MAILbox:DETailcommand..header: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:MAILbox:HEADercommand.
address
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:MAILbox:ADDRess command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:MAILbox:ADDRess?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:MAILbox:ADDRess?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:MAILbox:ADDRess:VALuecommand.
cnt
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:MAILbox:CNT command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:MAILbox:CNT?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:MAILbox:CNT?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:MAILbox:CNT:VALuecommand.
detail
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:MAILbox:DETail command.
Description
- This command sets or queries the Error Reply Service Data Details in EtherCAT bus. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:MAILbox:DETail?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:MAILbox:DETail?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:MAILbox:DETail valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:MAILbox:DETail {ONE|TWO|THRee|FOUR|FIVe|SIX|SEVEn|EIGHt|NINe}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:MAILbox:DETail?
Info
ONEspecifies the Detail field as ONE. This is the default value.TWOspecifies the Detail field as TWO.THReespecifies the Detail field as THRee.FOURspecifies the Detail field as FOUR.FIVespecifies the Detail field as FIVe.SIXspecifies the Detail field as SIX.SEVEnspecifies the Detail field as SEVEn.EIGHtspecifies the Detail field as EIGHt.NINespecifies the Detail field as NINe.
header
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:MAILbox:HEADer command.
Description
- This command sets or queries the Mailbox Header fields in EtherCAT bus. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:MAILbox:HEADer?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:MAILbox:HEADer?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:MAILbox:HEADer valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:MAILbox:HEADer {LENGth|ADDRess|CHANnel|PRIority|TYPe|CNT}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:MAILbox:HEADer?
Info
LENGthspecifies the Mailbox Header as Length. This is the default value.ADDRessspecifies the Mailbox Header as Address.CHANnelspecifies the Mailbox Header as Channel.PRIorityspecifies the Mailbox Header as Priority.TYPespecifies the Mailbox Header as Type.CNTspecifies the Mailbox Header as Count.
SearchSearchItemTriggerABusEthercatMailboxAddress
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:MAILbox:ADDRess command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:MAILbox:ADDRess?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:MAILbox:ADDRess?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:MAILbox:ADDRess:VALuecommand.
value
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:MAILbox:ADDRess:VALue command.
Description
- This command sets the binary Mailbox Address to be used for EtherCAT bus. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:MAILbox:ADDRess:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:MAILbox:ADDRess:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:MAILbox:ADDRess:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:MAILbox:ADDRess:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:MAILbox:ADDRess:VALue?
Info
<QString>is the binary Mailbox Address to be used when searching on an EtherCAT bus signal. The default size and value of Address is 16 bits and ‘XXXXXXXX XXXXXXXX’ respectively.
SearchSearchItemTriggerABusEthercatMailboxAddressValue
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:MAILbox:ADDRess:VALue command.
Description
- This command sets the binary Mailbox Address to be used for EtherCAT bus. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:MAILbox:ADDRess:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:MAILbox:ADDRess:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:MAILbox:ADDRess:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:MAILbox:ADDRess:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:MAILbox:ADDRess:VALue?
Info
<QString>is the binary Mailbox Address to be used when searching on an EtherCAT bus signal. The default size and value of Address is 16 bits and ‘XXXXXXXX XXXXXXXX’ respectively.
SearchSearchItemTriggerABusEthercatMailboxCnt
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:MAILbox:CNT command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:MAILbox:CNT?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:MAILbox:CNT?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:MAILbox:CNT:VALuecommand.
value
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:MAILbox:CNT:VALue command.
Description
- This command sets the binary counter of the mailbox services to be used for EtherCAT bus. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:MAILbox:CNT:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:MAILbox:CNT:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:MAILbox:CNT:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:MAILbox:CNT:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:MAILbox:CNT:VALue?
Info
<QString>is the binary Counter value to be used when searching on an EtherCAT bus signal. The default size and value of Counter is 3 bits and ‘XXX’ respectively.
SearchSearchItemTriggerABusEthercatMailboxCntValue
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:MAILbox:CNT:VALue command.
Description
- This command sets the binary counter of the mailbox services to be used for EtherCAT bus. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:MAILbox:CNT:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:MAILbox:CNT:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:MAILbox:CNT:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:MAILbox:CNT:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:MAILbox:CNT:VALue?
Info
<QString>is the binary Counter value to be used when searching on an EtherCAT bus signal. The default size and value of Counter is 3 bits and ‘XXX’ respectively.
SearchSearchItemTriggerABusEthercatMailboxDetail
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:MAILbox:DETail command.
Description
- This command sets or queries the Error Reply Service Data Details in EtherCAT bus. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:MAILbox:DETail?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:MAILbox:DETail?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:MAILbox:DETail valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:MAILbox:DETail {ONE|TWO|THRee|FOUR|FIVe|SIX|SEVEn|EIGHt|NINe}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:MAILbox:DETail?
Info
ONEspecifies the Detail field as ONE. This is the default value.TWOspecifies the Detail field as TWO.THReespecifies the Detail field as THRee.FOURspecifies the Detail field as FOUR.FIVespecifies the Detail field as FIVe.SIXspecifies the Detail field as SIX.SEVEnspecifies the Detail field as SEVEn.EIGHtspecifies the Detail field as EIGHt.NINespecifies the Detail field as NINe.
SearchSearchItemTriggerABusEthercatMailboxHeader
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:MAILbox:HEADer command.
Description
- This command sets or queries the Mailbox Header fields in EtherCAT bus. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:MAILbox:HEADer?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:MAILbox:HEADer?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:MAILbox:HEADer valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:MAILbox:HEADer {LENGth|ADDRess|CHANnel|PRIority|TYPe|CNT}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:MAILbox:HEADer?
Info
LENGthspecifies the Mailbox Header as Length. This is the default value.ADDRessspecifies the Mailbox Header as Address.CHANnelspecifies the Mailbox Header as Channel.PRIorityspecifies the Mailbox Header as Priority.TYPespecifies the Mailbox Header as Type.CNTspecifies the Mailbox Header as Count.
SearchSearchItemTriggerABusEthercatMailboxtype
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:MAILBOXTYPe command.
Description
- This command sets or queries the Mailbox Type fields in EtherCAT bus. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:MAILBOXTYPe?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:MAILBOXTYPe?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:MAILBOXTYPe valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:MAILBOXTYPe {ZERo|ONE|TWO|THRee|FOUR|FIVe|RESERved|FIFTeen}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:MAILBOXTYPe?
Info
ZERospecifies the Mailbox Type as ZERo. This is the default value.ONEspecifies the Mailbox Type as ONE.TWOspecifies the Mailbox Type as TWO.THReespecifies the Mailbox Type as THRee.FOURspecifies the Mailbox Type as FOUR.FIVespecifies the Mailbox Type as FIVe.RESERvedspecifies the Mailbox Type as RESERved.FIFTeenspecifies the Mailbox Type as FIFTeen.
SearchSearchItemTriggerABusEthercatNetwork
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:NETWork command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:NETWork?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:NETWork?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.variable: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:NETWork:VARiablecommand.
variable
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:NETWork:VARiable command.
Description
- This command sets or queries the Network Variable fields in EtherCAT bus. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:NETWork:VARiable?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:NETWork:VARiable?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:NETWork:VARiable valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:NETWork:VARiable {PUBHEADer|NVHEADer|NVDATa}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:NETWork:VARiable?
Info
PUBHEADerspecifies the Network Variable as PUBHEADer. This is the default value.NVHEADerspecifies the Network Variable as NVHEADer.NVDATaspecifies the Network Variable as NVDATa.
Sub-properties
.header: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:NETWork:VARiable:HEADercommand.
SearchSearchItemTriggerABusEthercatNetworkVariable
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:NETWork:VARiable command.
Description
- This command sets or queries the Network Variable fields in EtherCAT bus. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:NETWork:VARiable?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:NETWork:VARiable?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:NETWork:VARiable valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:NETWork:VARiable {PUBHEADer|NVHEADer|NVDATa}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:NETWork:VARiable?
Info
PUBHEADerspecifies the Network Variable as PUBHEADer. This is the default value.NVHEADerspecifies the Network Variable as NVHEADer.NVDATaspecifies the Network Variable as NVDATa.
Properties
.header: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:NETWork:VARiable:HEADercommand.
header
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:NETWork:VARiable:HEADer command.
Description
- This command sets or queries the Network Variable Header fields in EtherCAT bus. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:NETWork:VARiable:HEADer?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:NETWork:VARiable:HEADer?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:NETWork:VARiable:HEADer valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:NETWork:VARiable:HEADer {INDex|HASH|NVLEN|Q}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:NETWork:VARiable:HEADer?
Info
INDexspecifies the Network Variable Header field as INDex. This is the default value.HASHspecifies the Network Variable Header field as HASH.NVLENspecifies the Network Variable Header field as NVLEN.Qspecifies the Network Variable Header field as Q.
SearchSearchItemTriggerABusEthercatNetworkVariableHeader
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:NETWork:VARiable:HEADer command.
Description
- This command sets or queries the Network Variable Header fields in EtherCAT bus. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:NETWork:VARiable:HEADer?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:NETWork:VARiable:HEADer?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:NETWork:VARiable:HEADer valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:NETWork:VARiable:HEADer {INDex|HASH|NVLEN|Q}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:NETWork:VARiable:HEADer?
Info
INDexspecifies the Network Variable Header field as INDex. This is the default value.HASHspecifies the Network Variable Header field as HASH.NVLENspecifies the Network Variable Header field as NVLEN.Qspecifies the Network Variable Header field as Q.
SearchSearchItemTriggerABusEthercatNetworkvariable
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:NETWORKVARiable command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:NETWORKVARiable?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:NETWORKVARiable?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.data: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:NETWORKVARiable:DATacommand tree.
data
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:NETWORKVARiable:DATa command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:NETWORKVARiable:DATa?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:NETWORKVARiable:DATa?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.size: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:NETWORKVARiable:DATa:SIZecommand..value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:NETWORKVARiable:DATa:VALuecommand.
SearchSearchItemTriggerABusEthercatNetworkvariableData
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:NETWORKVARiable:DATa command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:NETWORKVARiable:DATa?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:NETWORKVARiable:DATa?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.size: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:NETWORKVARiable:DATa:SIZecommand..value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:NETWORKVARiable:DATa:VALuecommand.
size
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:NETWORKVARiable:DATa:SIZe command.
Description
- This command specifies the length of the network variable data string in bytes to be used for EtherCAT bus. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:NETWORKVARiable:DATa:SIZe?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:NETWORKVARiable:DATa:SIZe?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:NETWORKVARiable:DATa:SIZe valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:NETWORKVARiable:DATa:SIZe <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:NETWORKVARiable:DATa:SIZe?
Info
<NR1>is the Network Variable Data size. The default value is 1. The valid range is 1 to 5.
value
property
¶
SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:NETWORKVARiable:DATa:VALue command.
Description
- This command specifies the binary network variable data string used for EtherCAT bus. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:NETWORKVARiable:DATa:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:NETWORKVARiable:DATa:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:NETWORKVARiable:DATa:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:NETWORKVARiable:DATa:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:NETWORKVARiable:DATa:VALue?
Info
<QString>is the binary network variable data value to be used when searching on an EtherCAT bus signal. The default Network Variable Data value is ‘XXXXXXXX’.
SearchSearchItemTriggerABusEthercatNetworkvariableDataSize
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:NETWORKVARiable:DATa:SIZe command.
Description
- This command specifies the length of the network variable data string in bytes to be used for EtherCAT bus. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:NETWORKVARiable:DATa:SIZe?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:NETWORKVARiable:DATa:SIZe?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:NETWORKVARiable:DATa:SIZe valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:NETWORKVARiable:DATa:SIZe <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:NETWORKVARiable:DATa:SIZe?
Info
<NR1>is the Network Variable Data size. The default value is 1. The valid range is 1 to 5.
SearchSearchItemTriggerABusEthercatNetworkvariableDataValue
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:NETWORKVARiable:DATa:VALue command.
Description
- This command specifies the binary network variable data string used for EtherCAT bus. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:NETWORKVARiable:DATa:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:NETWORKVARiable:DATa:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:NETWORKVARiable:DATa:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:NETWORKVARiable:DATa:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:NETWORKVARiable:DATa:VALue?
Info
<QString>is the binary network variable data value to be used when searching on an EtherCAT bus signal. The default Network Variable Data value is ‘XXXXXXXX’.
SearchSearchItemTriggerABusEthercatOffset
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:OFFSet command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:OFFSet?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:OFFSet?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:OFFSet:VALuecommand.
value
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:OFFSet:VALue command.
Description
- This command sets the binary address offset information to be used for EtherCAT bus. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:OFFSet:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:OFFSet:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:OFFSet:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:OFFSet:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:OFFSet:VALue?
Info
<QString>is the binary Address Offset data value to be used when searching on an EtherCAT bus signal. The default size and value Address Offset is 16 bits and ‘XXXXXXXX XXXXXXXX’ respectively.
SearchSearchItemTriggerABusEthercatOffsetValue
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:OFFSet:VALue command.
Description
- This command sets the binary address offset information to be used for EtherCAT bus. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:OFFSet:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:OFFSet:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:OFFSet:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:OFFSet:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:OFFSet:VALue?
Info
<QString>is the binary Address Offset data value to be used when searching on an EtherCAT bus signal. The default size and value Address Offset is 16 bits and ‘XXXXXXXX XXXXXXXX’ respectively.
SearchSearchItemTriggerABusEthercatPosition
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:POSition command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:POSition?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:POSition?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:POSition:VALuecommand.
value
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:POSition:VALue command.
Description
- This command sets the binary address position information to be used for EtherCAT bus. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:POSition:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:POSition:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:POSition:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:POSition:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:POSition:VALue?
Info
<QString>is the binary Address Position value to be used when searching on an EtherCAT bus signal. The default size and value Address Position is 16 bits and ‘XXXXXXXX XXXXXXXX’ respectively.
SearchSearchItemTriggerABusEthercatPositionValue
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:POSition:VALue command.
Description
- This command sets the binary address position information to be used for EtherCAT bus. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:POSition:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:POSition:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:POSition:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:POSition:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:POSition:VALue?
Info
<QString>is the binary Address Position value to be used when searching on an EtherCAT bus signal. The default size and value Address Position is 16 bits and ‘XXXXXXXX XXXXXXXX’ respectively.
SearchSearchItemTriggerABusEthercatProtocoltype
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:PROTOCOLTYPe command.
Description
- This command sets or queries the EtherCAT Protocol Type in EtherCAT bus. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:PROTOCOLTYPe?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:PROTOCOLTYPe?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:PROTOCOLTYPe valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:PROTOCOLTYPe {PDU|NETWORKVARiables|MAILbox}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:PROTOCOLTYPe?
Info
PDUspecifies the Protocol Type as PDU. This is the default value.NETWORKVARiablesspecifies the Protocol Type as NETWORKVARiables.MAILboxspecifies the Protocol Type as MAILbox.
SearchSearchItemTriggerABusEthercatPubid
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:PUBID command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:PUBID?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:PUBID?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:PUBID:VALuecommand.
value
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:PUBID:VALue command.
Description
- This command sets the binary Publisher ID to be used for EtherCAT bus. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:PUBID:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:PUBID:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:PUBID:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:PUBID:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:PUBID:VALue?
Info
<QString>is the binary Publisher ID value to be used when searching on an EtherCAT bus signal. The default size and value of Publisher ID is 48 bits and ‘XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX’ respectively.
SearchSearchItemTriggerABusEthercatPubidValue
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:PUBID:VALue command.
Description
- This command sets the binary Publisher ID to be used for EtherCAT bus. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:PUBID:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:PUBID:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:PUBID:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:PUBID:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:PUBID:VALue?
Info
<QString>is the binary Publisher ID value to be used when searching on an EtherCAT bus signal. The default size and value of Publisher ID is 48 bits and ‘XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX’ respectively.
SearchSearchItemTriggerABusEthercatQuality
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:QUALity command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:QUALity?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:QUALity?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:QUALity:VALuecommand.
value
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:QUALity:VALue command.
Description
- This command sets the binary quality to be used for EtherCAT bus. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:QUALity:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:QUALity:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:QUALity:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:QUALity:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:QUALity:VALue?
Info
<QString>is the binary Quality value to be used when searching on an EtherCAT bus signal. The default size and value of Quality is 16 bits and ‘XXXXXXXX XXXXXXXX’ respectively.
SearchSearchItemTriggerABusEthercatQualityValue
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:QUALity:VALue command.
Description
- This command sets the binary quality to be used for EtherCAT bus. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:QUALity:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:QUALity:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:QUALity:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:QUALity:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:QUALity:VALue?
Info
<QString>is the binary Quality value to be used when searching on an EtherCAT bus signal. The default size and value of Quality is 16 bits and ‘XXXXXXXX XXXXXXXX’ respectively.
SearchSearchItemTriggerABusEthercatService
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:SERVice command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:SERVice?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:SERVice?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.data: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:SERVice:DATacommand tree.
data
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:SERVice:DATa command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:SERVice:DATa?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:SERVice:DATa?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.length: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:SERVice:DATa:LENGthcommand..size: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:SERVice:DATa:SIZecommand..value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:SERVice:DATa:VALuecommand.
SearchSearchItemTriggerABusEthercatServiceData
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:SERVice:DATa command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:SERVice:DATa?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:SERVice:DATa?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.length: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:SERVice:DATa:LENGthcommand..size: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:SERVice:DATa:SIZecommand..value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:SERVice:DATa:VALuecommand.
length
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:SERVice:DATa:LENGth command.
Description
- This command sets the binary Service Data Length to be used for EtherCAT bus. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:SERVice:DATa:LENGth?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:SERVice:DATa:LENGth?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:SERVice:DATa:LENGth valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:SERVice:DATa:LENGth <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:SERVice:DATa:LENGth?
Info
<QString>is the binary Service Data Length to be used when searching on an EtherCAT bus signal. The default size and value of Service Data Length is 16 bits and ‘XXXXXXXX XXXXXXXX’ respectively.
size
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:SERVice:DATa:SIZe command.
Description
- This command specifies the length of the service data string in bytes to be used for EtherCAT bus. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:SERVice:DATa:SIZe?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:SERVice:DATa:SIZe?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:SERVice:DATa:SIZe valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:SERVice:DATa:SIZe <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:SERVice:DATa:SIZe?
Info
<NR1>is the Service Data size. The default value is 1. The valid range is 1 to 5.
value
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:SERVice:DATa:VALue command.
Description
- This command specifies the length of the service data string in bytes to be used for EtherCAT bus. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:SERVice:DATa:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:SERVice:DATa:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:SERVice:DATa:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:SERVice:DATa:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:SERVice:DATa:VALue?
Info
<QString>is the binary Service Data value to be used when searching on an EtherCAT bus signal. The default size and value of Service Data is 8 bits and ‘XXXXXXXX’ respectively.
SearchSearchItemTriggerABusEthercatServiceDataLength
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:SERVice:DATa:LENGth command.
Description
- This command sets the binary Service Data Length to be used for EtherCAT bus. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:SERVice:DATa:LENGth?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:SERVice:DATa:LENGth?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:SERVice:DATa:LENGth valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:SERVice:DATa:LENGth <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:SERVice:DATa:LENGth?
Info
<QString>is the binary Service Data Length to be used when searching on an EtherCAT bus signal. The default size and value of Service Data Length is 16 bits and ‘XXXXXXXX XXXXXXXX’ respectively.
SearchSearchItemTriggerABusEthercatServiceDataSize
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:SERVice:DATa:SIZe command.
Description
- This command specifies the length of the service data string in bytes to be used for EtherCAT bus. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:SERVice:DATa:SIZe?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:SERVice:DATa:SIZe?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:SERVice:DATa:SIZe valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:SERVice:DATa:SIZe <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:SERVice:DATa:SIZe?
Info
<NR1>is the Service Data size. The default value is 1. The valid range is 1 to 5.
SearchSearchItemTriggerABusEthercatServiceDataValue
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:SERVice:DATa:VALue command.
Description
- This command specifies the length of the service data string in bytes to be used for EtherCAT bus. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:SERVice:DATa:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:SERVice:DATa:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:SERVice:DATa:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:SERVice:DATa:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:SERVice:DATa:VALue?
Info
<QString>is the binary Service Data value to be used when searching on an EtherCAT bus signal. The default size and value of Service Data is 8 bits and ‘XXXXXXXX’ respectively.
SearchSearchItemTriggerABusEthercatSourceaddress
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:SOURCEADDRess command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:SOURCEADDRess?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:SOURCEADDRess?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:SOURCEADDRess:VALuecommand.
value
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:SOURCEADDRess:VALue command.
Description
- This command sets the binary MAC source address value to be used for EtherCAT bus. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:SOURCEADDRess:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:SOURCEADDRess:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:SOURCEADDRess:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:SOURCEADDRess:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:SOURCEADDRess:VALue?
Info
<QString>is the binary MAC source address value to be used when searching on an EtherCAT bus signal. The default size and value of MAC Source Address is 48 bits and ‘XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX’ respectively.
SearchSearchItemTriggerABusEthercatSourceaddressValue
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:SOURCEADDRess:VALue command.
Description
- This command sets the binary MAC source address value to be used for EtherCAT bus. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:SOURCEADDRess:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:SOURCEADDRess:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:SOURCEADDRess:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:SOURCEADDRess:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:SOURCEADDRess:VALue?
Info
<QString>is the binary MAC source address value to be used when searching on an EtherCAT bus signal. The default size and value of MAC Source Address is 48 bits and ‘XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX’ respectively.
SearchSearchItemTriggerABusEthercatSrc
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:SRC command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:SRC?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:SRC?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.port: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:SRC:PORTcommand tree.
port
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:SRC:PORT command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:SRC:PORT?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:SRC:PORT?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:SRC:PORT:VALuecommand.
SearchSearchItemTriggerABusEthercatSrcPort
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:SRC:PORT command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:SRC:PORT?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:SRC:PORT?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:SRC:PORT:VALuecommand.
value
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:SRC:PORT:VALue command.
Description
- This command sets the UDP Source port to be used for EtherCAT bus. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:SRC:PORT:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:SRC:PORT:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:SRC:PORT:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:SRC:PORT:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:SRC:PORT:VALue?
Info
<QString>is the binary Source Port value to be used when searching on an EtherCAT bus signal. The default size and value of Source Port is 16 bits and ‘XXXXXXXX XXXXXXXX’ respectively.
SearchSearchItemTriggerABusEthercatSrcPortValue
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:SRC:PORT:VALue command.
Description
- This command sets the UDP Source port to be used for EtherCAT bus. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:SRC:PORT:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:SRC:PORT:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:SRC:PORT:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:SRC:PORT:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:SRC:PORT:VALue?
Info
<QString>is the binary Source Port value to be used when searching on an EtherCAT bus signal. The default size and value of Source Port is 16 bits and ‘XXXXXXXX XXXXXXXX’ respectively.
SearchSearchItemTriggerABusEthercatTci
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:TCI command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:TCI?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:TCI?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:TCI:VALuecommand.
value
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:TCI:VALue command.
Description
- This command sets the binary Tag control Information to be used for EtherCAT bus. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:TCI:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:TCI:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:TCI:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:TCI:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:TCI:VALue?
Info
<QString>is the binary TCI value to be used when searching on an EtherCAT bus signal. The default size and value of TCI is 16 bits and ‘XXXXXXXX XXXXXXXX’ respectively.
SearchSearchItemTriggerABusEthercatTciValue
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:TCI:VALue command.
Description
- This command sets the binary Tag control Information to be used for EtherCAT bus. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:TCI:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:TCI:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:TCI:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:TCI:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:TCI:VALue?
Info
<QString>is the binary TCI value to be used when searching on an EtherCAT bus signal. The default size and value of TCI is 16 bits and ‘XXXXXXXX XXXXXXXX’ respectively.
SearchSearchItemTriggerABusEthercatWkc
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:WKC command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:WKC?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:WKC?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:WKC:VALuecommand.
value
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:WKC:VALue command.
Description
- This command sets the binary Working Counter information to be used for EtherCAT bus. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:WKC:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:WKC:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:WKC:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:WKC:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:WKC:VALue?
Info
<QString>is the binary Working Counter information value to be used when searching on an EtherCAT bus signal. The default size and value of Working Counter information is 16 bits and ‘XXXXXXXX XXXXXXXX’ respectively.
SearchSearchItemTriggerABusEthercatWkcValue
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:WKC:VALue command.
Description
- This command sets the binary Working Counter information to be used for EtherCAT bus. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:WKC:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:WKC:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:WKC:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:WKC:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERCAT:WKC:VALue?
Info
<QString>is the binary Working Counter information value to be used when searching on an EtherCAT bus signal. The default size and value of Working Counter information is 16 bits and ‘XXXXXXXX XXXXXXXX’ respectively.
SearchSearchItemTriggerABusEthernet
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.condition: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:CONDitioncommand..data: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:DATacommand tree..ipheader: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:IPHeadercommand tree..mac: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MACcommand tree..qtag: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:QTAGcommand tree..tcpheader: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeadercommand tree.
condition
property
¶
condition: SearchSearchItemTriggerABusEthernetCondition
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:CONDition command.
Description
- This command specifies a field or condition for an Ethernet bus to search on. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:CONDition?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:CONDition?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:CONDition valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:CONDition {SFD|MACADDRess|MACLENgth|IPHeader|TCPHeader|DATa|EOP|IDLe|FCSError|QTAG}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:CONDition?
Info
SFD- Start of frame delimiter.MACADDRess- MAC addresses field.MACLENgth- MAC length/type field.IPHeader- IP header field.TCPHeader- TCP header field.DATa- TCP/IPv4 or MAC protocol client data field.EOP- End of Packet field.IDLe- Idle field.FCSError- Frame Check Sequence Error (CRC) field.QTAG- IEEE 802.1Q (VLAN) control information field.
data
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:DATa command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:DATa?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:DATa?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.hivalue: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:DATa:HIVALuecommand..offset: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:DATa:OFFSetcommand..qualifier: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:DATa:QUALifiercommand..size: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:DATa:SIZecommand..value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:DATa:VALuecommand.
ipheader
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:IPHeader command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:IPHeader?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:IPHeader?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.destinationaddr: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:IPHeader:DESTinationaddrcommand tree..protocol: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:IPHeader:PROTOcolcommand tree..sourceaddr: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:IPHeader:SOUrceaddrcommand tree.
mac
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.address: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:ADDResscommand tree..length: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:LENgthcommand tree.
qtag
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:QTAG command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:QTAG?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:QTAG?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:QTAG:VALuecommand.
tcpheader
property
¶
tcpheader: SearchSearchItemTriggerABusEthernetTcpheader
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.acknum: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:ACKnumcommand tree..destinationport: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:DESTinationportcommand tree..seqnum: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:SEQnumcommand tree..sourceport: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:SOUrceportcommand tree.
SearchSearchItemTriggerABusEthernetCondition
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:CONDition command.
Description
- This command specifies a field or condition for an Ethernet bus to search on. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:CONDition?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:CONDition?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:CONDition valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:CONDition {SFD|MACADDRess|MACLENgth|IPHeader|TCPHeader|DATa|EOP|IDLe|FCSError|QTAG}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:CONDition?
Info
SFD- Start of frame delimiter.MACADDRess- MAC addresses field.MACLENgth- MAC length/type field.IPHeader- IP header field.TCPHeader- TCP header field.DATa- TCP/IPv4 or MAC protocol client data field.EOP- End of Packet field.IDLe- Idle field.FCSError- Frame Check Sequence Error (CRC) field.QTAG- IEEE 802.1Q (VLAN) control information field.
SearchSearchItemTriggerABusEthernetData
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:DATa command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:DATa?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:DATa?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.hivalue: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:DATa:HIVALuecommand..offset: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:DATa:OFFSetcommand..qualifier: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:DATa:QUALifiercommand..size: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:DATa:SIZecommand..value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:DATa:VALuecommand.
hivalue
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:DATa:HIVALue command.
Description
- This command sets or queries the binary data value to be used when searching on an Ethernet bus signal. The search condition must be set to DATA and the data qualifier to inside or outside range. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:DATa:HIVALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:DATa:HIVALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:DATa:HIVALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:DATa:HIVALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:DATa:HIVALue?
Info
<QString>is the binary data value to be used when searching on an Ethernet bus signal.
offset
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:DATa:OFFSet command.
Description
- This command specifies the data offset value, in bytes, to use when searching on the Ethernet data field. The search condition needs to be set to DATa.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:DATa:OFFSet?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:DATa:OFFSet?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:DATa:OFFSet valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:DATa:OFFSet <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:DATa:OFFSet?
Info
<NR1>is an integer whose minimum and default values are -1 (don’t care) and maximum is 1,499.
qualifier
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:DATa:QUALifier command.
Description
- This command specifies the qualifier to be used when searching on an Ethernet bus signal. The search condition must be set to DATa. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:DATa:QUALifier?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:DATa:QUALifier?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:DATa:QUALifier valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:DATa:QUALifier {LESSthan|MOREthan|EQual|UNEQual|LESSEQual|MOREEQual|INrange|OUTrange}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:DATa:QUALifier?
Info
LESSthansets the qualifier to less than.MOREthansets the qualifier to greater than.EQualsets the qualifier to equal.UNEQualsets the qualifier to not equal.LESSEQualsets the qualifier to less than or equal.MOREEQualsets the qualifier to greater than or equal.INrangesets the qualifier to in range.OUTrangesets the qualifier to out of range.
size
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:DATa:SIZe command.
Description
- This command specifies the number of contiguous TCP/IPv4/MAC client bytes to use when searching on the Ethernet data field. The default is all X’s (don’t care). The search condition needs to be set to DATa.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:DATa:SIZe?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:DATa:SIZe?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:DATa:SIZe valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:DATa:SIZe <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:DATa:SIZe?
Info
<NR1>specifies the length of the data string, in bytes. The minimum and default values are 1, and the maximum value is 16.
value
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:DATa:VALue command.
Description
- This command specifies the binary value to use when searching on the Ethernet data field. The default is all X’s (don’t care). The search condition needs to be set to DATa.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:DATa:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:DATa:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:DATa:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:DATa:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:DATa:VALue?
Info
<QString>is a quoted string where the allowable characters are 0, 1, and X. The allowable number of characters depends on the setting for size (usingSEARCH:SEARCHX:TRIGGER:A:BUS:ETHERNET:DATA:SIZE). The bits specified in the quoted string replace the least significant bits, leaving any unspecified upper bits unchanged.
SearchSearchItemTriggerABusEthernetDataHivalue
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:DATa:HIVALue command.
Description
- This command sets or queries the binary data value to be used when searching on an Ethernet bus signal. The search condition must be set to DATA and the data qualifier to inside or outside range. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:DATa:HIVALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:DATa:HIVALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:DATa:HIVALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:DATa:HIVALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:DATa:HIVALue?
Info
<QString>is the binary data value to be used when searching on an Ethernet bus signal.
SearchSearchItemTriggerABusEthernetDataOffset
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:DATa:OFFSet command.
Description
- This command specifies the data offset value, in bytes, to use when searching on the Ethernet data field. The search condition needs to be set to DATa.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:DATa:OFFSet?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:DATa:OFFSet?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:DATa:OFFSet valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:DATa:OFFSet <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:DATa:OFFSet?
Info
<NR1>is an integer whose minimum and default values are -1 (don’t care) and maximum is 1,499.
SearchSearchItemTriggerABusEthernetDataQualifier
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:DATa:QUALifier command.
Description
- This command specifies the qualifier to be used when searching on an Ethernet bus signal. The search condition must be set to DATa. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:DATa:QUALifier?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:DATa:QUALifier?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:DATa:QUALifier valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:DATa:QUALifier {LESSthan|MOREthan|EQual|UNEQual|LESSEQual|MOREEQual|INrange|OUTrange}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:DATa:QUALifier?
Info
LESSthansets the qualifier to less than.MOREthansets the qualifier to greater than.EQualsets the qualifier to equal.UNEQualsets the qualifier to not equal.LESSEQualsets the qualifier to less than or equal.MOREEQualsets the qualifier to greater than or equal.INrangesets the qualifier to in range.OUTrangesets the qualifier to out of range.
SearchSearchItemTriggerABusEthernetDataSize
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:DATa:SIZe command.
Description
- This command specifies the number of contiguous TCP/IPv4/MAC client bytes to use when searching on the Ethernet data field. The default is all X’s (don’t care). The search condition needs to be set to DATa.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:DATa:SIZe?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:DATa:SIZe?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:DATa:SIZe valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:DATa:SIZe <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:DATa:SIZe?
Info
<NR1>specifies the length of the data string, in bytes. The minimum and default values are 1, and the maximum value is 16.
SearchSearchItemTriggerABusEthernetDataValue
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:DATa:VALue command.
Description
- This command specifies the binary value to use when searching on the Ethernet data field. The default is all X’s (don’t care). The search condition needs to be set to DATa.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:DATa:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:DATa:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:DATa:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:DATa:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:DATa:VALue?
Info
<QString>is a quoted string where the allowable characters are 0, 1, and X. The allowable number of characters depends on the setting for size (usingSEARCH:SEARCHX:TRIGGER:A:BUS:ETHERNET:DATA:SIZE). The bits specified in the quoted string replace the least significant bits, leaving any unspecified upper bits unchanged.
SearchSearchItemTriggerABusEthernetIpheader
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:IPHeader command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:IPHeader?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:IPHeader?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.destinationaddr: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:IPHeader:DESTinationaddrcommand tree..protocol: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:IPHeader:PROTOcolcommand tree..sourceaddr: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:IPHeader:SOUrceaddrcommand tree.
destinationaddr
property
¶
destinationaddr: SearchSearchItemTriggerABusEthernetIpheaderDestinationaddr
SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:IPHeader:DESTinationaddr command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:IPHeader:DESTinationaddr?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:IPHeader:DESTinationaddr?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:IPHeader:DESTinationaddr:VALuecommand.
protocol
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:IPHeader:PROTOcol command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:IPHeader:PROTOcol?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:IPHeader:PROTOcol?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:IPHeader:PROTOcol:VALuecommand.
sourceaddr
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:IPHeader:SOUrceaddr command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:IPHeader:SOUrceaddr?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:IPHeader:SOUrceaddr?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:IPHeader:SOUrceaddr:VALuecommand.
SearchSearchItemTriggerABusEthernetIpheaderDestinationaddr
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:IPHeader:DESTinationaddr command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:IPHeader:DESTinationaddr?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:IPHeader:DESTinationaddr?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:IPHeader:DESTinationaddr:VALuecommand.
value
property
¶
SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:IPHeader:DESTinationaddr:VALue command.
Description
- This command specifies the binary destination address value to use when searching on an Ethernet bus signal. The search condition needs to be set to IPHeader. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:IPHeader:DESTinationaddr:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:IPHeader:DESTinationaddr:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:IPHeader:DESTinationaddr:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:IPHeader:DESTinationaddr:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:IPHeader:DESTinationaddr:VALue?
Info
<QString>is a quoted string of up to 32 characters where the allowable characters are 0, 1, and X. The bits specified in the quoted string replace the least significant bits, leaving any unspecified upper bits unchanged.
SearchSearchItemTriggerABusEthernetIpheaderDestinationaddrValue
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:IPHeader:DESTinationaddr:VALue command.
Description
- This command specifies the binary destination address value to use when searching on an Ethernet bus signal. The search condition needs to be set to IPHeader. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:IPHeader:DESTinationaddr:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:IPHeader:DESTinationaddr:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:IPHeader:DESTinationaddr:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:IPHeader:DESTinationaddr:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:IPHeader:DESTinationaddr:VALue?
Info
<QString>is a quoted string of up to 32 characters where the allowable characters are 0, 1, and X. The bits specified in the quoted string replace the least significant bits, leaving any unspecified upper bits unchanged.
SearchSearchItemTriggerABusEthernetIpheaderProtocol
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:IPHeader:PROTOcol command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:IPHeader:PROTOcol?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:IPHeader:PROTOcol?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:IPHeader:PROTOcol:VALuecommand.
value
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:IPHeader:PROTOcol:VALue command.
Description
- This command specifies the 8-bit value to use when searching on the Ethernet IPv4 header protocol field. The default is all X’s (don’t care). The search condition needs to be set to IPHeader.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:IPHeader:PROTOcol:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:IPHeader:PROTOcol:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:IPHeader:PROTOcol:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:IPHeader:PROTOcol:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:IPHeader:PROTOcol:VALue?
Info
<QString>is a quoted string of up to 8 characters where the allowable characters are 0, 1, and X. The bits specified in the quoted string replace the least significant bits, leaving any unspecified upper bits unchanged.
SearchSearchItemTriggerABusEthernetIpheaderProtocolValue
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:IPHeader:PROTOcol:VALue command.
Description
- This command specifies the 8-bit value to use when searching on the Ethernet IPv4 header protocol field. The default is all X’s (don’t care). The search condition needs to be set to IPHeader.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:IPHeader:PROTOcol:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:IPHeader:PROTOcol:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:IPHeader:PROTOcol:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:IPHeader:PROTOcol:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:IPHeader:PROTOcol:VALue?
Info
<QString>is a quoted string of up to 8 characters where the allowable characters are 0, 1, and X. The bits specified in the quoted string replace the least significant bits, leaving any unspecified upper bits unchanged.
SearchSearchItemTriggerABusEthernetIpheaderSourceaddr
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:IPHeader:SOUrceaddr command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:IPHeader:SOUrceaddr?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:IPHeader:SOUrceaddr?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:IPHeader:SOUrceaddr:VALuecommand.
value
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:IPHeader:SOUrceaddr:VALue command.
Description
- This command specifies the 32-bit value to use when searching on the Ethernet IPv4 header address source field. The default is all X’s (don’t care). The search condition needs to be set to IPHeader.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:IPHeader:SOUrceaddr:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:IPHeader:SOUrceaddr:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:IPHeader:SOUrceaddr:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:IPHeader:SOUrceaddr:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:IPHeader:SOUrceaddr:VALue?
Info
<QString>is a quoted string of up to 32 characters where the allowable characters are 0, 1, and X. The bits specified in the quoted string replace the least significant bits, leaving any unspecified upper bits unchanged.
SearchSearchItemTriggerABusEthernetIpheaderSourceaddrValue
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:IPHeader:SOUrceaddr:VALue command.
Description
- This command specifies the 32-bit value to use when searching on the Ethernet IPv4 header address source field. The default is all X’s (don’t care). The search condition needs to be set to IPHeader.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:IPHeader:SOUrceaddr:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:IPHeader:SOUrceaddr:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:IPHeader:SOUrceaddr:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:IPHeader:SOUrceaddr:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:IPHeader:SOUrceaddr:VALue?
Info
<QString>is a quoted string of up to 32 characters where the allowable characters are 0, 1, and X. The bits specified in the quoted string replace the least significant bits, leaving any unspecified upper bits unchanged.
SearchSearchItemTriggerABusEthernetMac
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.address: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:ADDResscommand tree..length: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:LENgthcommand tree.
address
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:ADDRess command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:ADDRess?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:ADDRess?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.destination: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:ADDRess:DESTinationcommand tree..source: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:ADDRess:SOUrcecommand tree.
length
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:LENgth command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:LENgth?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:LENgth?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.hivalue: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:LENgth:HIVALuecommand..value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:LENgth:VALuecommand.
SearchSearchItemTriggerABusEthernetMacAddress
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:ADDRess command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:ADDRess?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:ADDRess?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.destination: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:ADDRess:DESTinationcommand tree..source: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:ADDRess:SOUrcecommand tree.
destination
property
¶
SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:ADDRess:DESTination command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:ADDRess:DESTination?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:ADDRess:DESTination?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:ADDRess:DESTination:VALuecommand.
source
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:ADDRess:SOUrce command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:ADDRess:SOUrce?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:ADDRess:SOUrce?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:ADDRess:SOUrce:VALuecommand.
SearchSearchItemTriggerABusEthernetMacAddressDestination
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:ADDRess:DESTination command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:ADDRess:DESTination?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:ADDRess:DESTination?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:ADDRess:DESTination:VALuecommand.
value
property
¶
SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:ADDRess:DESTination:VALue command.
Description
- This command specifies the binary MAC address destination value to use when searching on an Ethernet bus signal. The search condition needs to be set to MACADDRess. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:ADDRess:DESTination:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:ADDRess:DESTination:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:ADDRess:DESTination:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:ADDRess:DESTination:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:ADDRess:DESTination:VALue?
Info
<QString>is a quoted string of up to 48 characters where the allowable characters are 0, 1, and X. The bits specified in the quoted string replace the least significant bits, leaving any unspecified upper bits unchanged.
SearchSearchItemTriggerABusEthernetMacAddressDestinationValue
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:ADDRess:DESTination:VALue command.
Description
- This command specifies the binary MAC address destination value to use when searching on an Ethernet bus signal. The search condition needs to be set to MACADDRess. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:ADDRess:DESTination:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:ADDRess:DESTination:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:ADDRess:DESTination:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:ADDRess:DESTination:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:ADDRess:DESTination:VALue?
Info
<QString>is a quoted string of up to 48 characters where the allowable characters are 0, 1, and X. The bits specified in the quoted string replace the least significant bits, leaving any unspecified upper bits unchanged.
SearchSearchItemTriggerABusEthernetMacAddressSource
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:ADDRess:SOUrce command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:ADDRess:SOUrce?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:ADDRess:SOUrce?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:ADDRess:SOUrce:VALuecommand.
value
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:ADDRess:SOUrce:VALue command.
Description
- This command specifies the 48-bit value to use when searching on the Ethernet MAC address source field. The default is all X’s (don’t care). The search condition needs to be set to MACADDRess.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:ADDRess:SOUrce:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:ADDRess:SOUrce:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:ADDRess:SOUrce:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:ADDRess:SOUrce:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:ADDRess:SOUrce:VALue?
Info
<QString>is a quoted string of up to 48 characters where the allowable characters are 0, 1, and X. The bits specified in the quoted string replace the least significant bits, leaving any unspecified upper bits unchanged.
SearchSearchItemTriggerABusEthernetMacAddressSourceValue
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:ADDRess:SOUrce:VALue command.
Description
- This command specifies the 48-bit value to use when searching on the Ethernet MAC address source field. The default is all X’s (don’t care). The search condition needs to be set to MACADDRess.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:ADDRess:SOUrce:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:ADDRess:SOUrce:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:ADDRess:SOUrce:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:ADDRess:SOUrce:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:ADDRess:SOUrce:VALue?
Info
<QString>is a quoted string of up to 48 characters where the allowable characters are 0, 1, and X. The bits specified in the quoted string replace the least significant bits, leaving any unspecified upper bits unchanged.
SearchSearchItemTriggerABusEthernetMacLength
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:LENgth command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:LENgth?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:LENgth?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.hivalue: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:LENgth:HIVALuecommand..value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:LENgth:VALuecommand.
hivalue
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:LENgth:HIVALue command.
Description
- This command specifies the binary MAC length high value to use when searching on an Ethernet bus signal. The search condition needs to be set to MACADDRess. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:LENgth:HIVALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:LENgth:HIVALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:LENgth:HIVALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:LENgth:HIVALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:LENgth:HIVALue?
Info
<QString>is a quoted string of up to 16 characters where the allowable characters are 0, 1, and X. The bits specified in the quoted string replace the least significant bits, leaving any unspecified upper bits unchanged.
value
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:LENgth:VALue command.
Description
- This command specifies the MAC length value to use when searching on an Ethernet bus signal. The search condition needs to be set to MACADDRess. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:LENgth:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:LENgth:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:LENgth:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:LENgth:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:LENgth:VALue?
Info
<QString>is a quoted string of up to 16 characters where the allowable characters are 0, 1, and X. The bits specified in the quoted string replace the least significant bits, leaving any unspecified upper bits unchanged.
SearchSearchItemTriggerABusEthernetMacLengthHivalue
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:LENgth:HIVALue command.
Description
- This command specifies the binary MAC length high value to use when searching on an Ethernet bus signal. The search condition needs to be set to MACADDRess. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:LENgth:HIVALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:LENgth:HIVALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:LENgth:HIVALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:LENgth:HIVALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:LENgth:HIVALue?
Info
<QString>is a quoted string of up to 16 characters where the allowable characters are 0, 1, and X. The bits specified in the quoted string replace the least significant bits, leaving any unspecified upper bits unchanged.
SearchSearchItemTriggerABusEthernetMacLengthValue
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:LENgth:VALue command.
Description
- This command specifies the MAC length value to use when searching on an Ethernet bus signal. The search condition needs to be set to MACADDRess. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:LENgth:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:LENgth:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:LENgth:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:LENgth:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:LENgth:VALue?
Info
<QString>is a quoted string of up to 16 characters where the allowable characters are 0, 1, and X. The bits specified in the quoted string replace the least significant bits, leaving any unspecified upper bits unchanged.
SearchSearchItemTriggerABusEthernetQtag
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:QTAG command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:QTAG?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:QTAG?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:QTAG:VALuecommand.
value
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:QTAG:VALue command.
Description
- This command specifies the 32-bit value to use when searching on the Ethernet Q-Tag field. The default is all X’s (don’t care). The search condition needs to be set to QTAG.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:QTAG:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:QTAG:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:QTAG:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:QTAG:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:QTAG:VALue?
Info
<QString>is a quoted string of up to 32 characters where the allowable characters are 0, 1, and X. The bits specified in the quoted string replace the least significant bits, leaving any unspecified upper bits unchanged.
SearchSearchItemTriggerABusEthernetQtagValue
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:QTAG:VALue command.
Description
- This command specifies the 32-bit value to use when searching on the Ethernet Q-Tag field. The default is all X’s (don’t care). The search condition needs to be set to QTAG.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:QTAG:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:QTAG:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:QTAG:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:QTAG:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:QTAG:VALue?
Info
<QString>is a quoted string of up to 32 characters where the allowable characters are 0, 1, and X. The bits specified in the quoted string replace the least significant bits, leaving any unspecified upper bits unchanged.
SearchSearchItemTriggerABusEthernetTcpheader
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.acknum: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:ACKnumcommand tree..destinationport: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:DESTinationportcommand tree..seqnum: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:SEQnumcommand tree..sourceport: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:SOUrceportcommand tree.
acknum
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:ACKnum command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:ACKnum?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:ACKnum?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:ACKnum:VALuecommand.
destinationport
property
¶
destinationport: SearchSearchItemTriggerABusEthernetTcpheaderDestinationport
SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:DESTinationport command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:DESTinationport?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:DESTinationport?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:DESTinationport:VALuecommand.
seqnum
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:SEQnum command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:SEQnum?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:SEQnum?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:SEQnum:VALuecommand.
sourceport
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:SOUrceport command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:SOUrceport?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:SOUrceport?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:SOUrceport:VALuecommand.
SearchSearchItemTriggerABusEthernetTcpheaderAcknum
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:ACKnum command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:ACKnum?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:ACKnum?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:ACKnum:VALuecommand.
value
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:ACKnum:VALue command.
Description
- This command specifies the 32-bit value to use when searching on the Ethernet TCP header acknowledgement number. The default is all X’s (don’t care). The search condition needs to be set to TCPHeader.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:ACKnum:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:ACKnum:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:ACKnum:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:ACKnum:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:ACKnum:VALue?
Info
<QString>is a quoted string of up to 32 characters where the allowable characters are 0, 1, and X. The bits specified in the quoted string replace the least significant bits, leaving any unspecified upper bits unchanged.
SearchSearchItemTriggerABusEthernetTcpheaderAcknumValue
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:ACKnum:VALue command.
Description
- This command specifies the 32-bit value to use when searching on the Ethernet TCP header acknowledgement number. The default is all X’s (don’t care). The search condition needs to be set to TCPHeader.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:ACKnum:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:ACKnum:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:ACKnum:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:ACKnum:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:ACKnum:VALue?
Info
<QString>is a quoted string of up to 32 characters where the allowable characters are 0, 1, and X. The bits specified in the quoted string replace the least significant bits, leaving any unspecified upper bits unchanged.
SearchSearchItemTriggerABusEthernetTcpheaderDestinationport
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:DESTinationport command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:DESTinationport?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:DESTinationport?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:DESTinationport:VALuecommand.
value
property
¶
SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:DESTinationport:VALue command.
Description
- This command specifies the binary destination port value to use when searching on the Ethernet TCP header destination port number. The search condition needs to be set to TCPHeader. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:DESTinationport:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:DESTinationport:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:DESTinationport:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:DESTinationport:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:DESTinationport:VALue?
Info
<QString>is a quoted string of up to 16 characters where the allowable characters are 0, 1, and X. The bits specified in the quoted string replace the least significant bits, leaving any unspecified upper bits unchanged.
SearchSearchItemTriggerABusEthernetTcpheaderDestinationportValue
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:DESTinationport:VALue command.
Description
- This command specifies the binary destination port value to use when searching on the Ethernet TCP header destination port number. The search condition needs to be set to TCPHeader. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:DESTinationport:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:DESTinationport:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:DESTinationport:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:DESTinationport:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:DESTinationport:VALue?
Info
<QString>is a quoted string of up to 16 characters where the allowable characters are 0, 1, and X. The bits specified in the quoted string replace the least significant bits, leaving any unspecified upper bits unchanged.
SearchSearchItemTriggerABusEthernetTcpheaderSeqnum
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:SEQnum command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:SEQnum?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:SEQnum?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:SEQnum:VALuecommand.
value
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:SEQnum:VALue command.
Description
- This command specifies the 32-bit value to use when searching on the Ethernet TCP header sequence number. The default is all X’s (don’t care). The search condition needs to be set to TCPHeader.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:SEQnum:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:SEQnum:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:SEQnum:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:SEQnum:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:SEQnum:VALue?
Info
<QString>is a quoted string of up to 32 characters where the allowable characters are 0, 1, and X. The bits specified in the quoted string replace the least significant bits, leaving any unspecified upper bits unchanged.
SearchSearchItemTriggerABusEthernetTcpheaderSeqnumValue
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:SEQnum:VALue command.
Description
- This command specifies the 32-bit value to use when searching on the Ethernet TCP header sequence number. The default is all X’s (don’t care). The search condition needs to be set to TCPHeader.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:SEQnum:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:SEQnum:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:SEQnum:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:SEQnum:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:SEQnum:VALue?
Info
<QString>is a quoted string of up to 32 characters where the allowable characters are 0, 1, and X. The bits specified in the quoted string replace the least significant bits, leaving any unspecified upper bits unchanged.
SearchSearchItemTriggerABusEthernetTcpheaderSourceport
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:SOUrceport command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:SOUrceport?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:SOUrceport?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:SOUrceport:VALuecommand.
value
property
¶
SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:SOUrceport:VALue command.
Description
- This command specifies the 16-bit value to use when searching on the Ethernet TCP header source port number. The default is all X’s (don’t care). The search condition needs to be set to TCPHeader.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:SOUrceport:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:SOUrceport:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:SOUrceport:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:SOUrceport:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:SOUrceport:VALue?
Info
<QString>is a quoted string of up to 16 characters where the allowable characters are 0, 1, and X. The bits specified in the quoted string replace the least significant bits, leaving any unspecified upper bits unchanged.
SearchSearchItemTriggerABusEthernetTcpheaderSourceportValue
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:SOUrceport:VALue command.
Description
- This command specifies the 16-bit value to use when searching on the Ethernet TCP header source port number. The default is all X’s (don’t care). The search condition needs to be set to TCPHeader.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:SOUrceport:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:SOUrceport:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:SOUrceport:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:SOUrceport:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:SOUrceport:VALue?
Info
<QString>is a quoted string of up to 16 characters where the allowable characters are 0, 1, and X. The bits specified in the quoted string replace the least significant bits, leaving any unspecified upper bits unchanged.
SearchSearchItemTriggerABusEusb
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.address: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:ADDresscommand tree..condition: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:CONDitioncommand..databits: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:DATABITScommand tree..data: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:DATacommand tree..endpoint: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:ENDPointcommand tree..endsearch: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:ENDSEARchcommand..eop: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:EOPcommand tree..eopbits: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:EOPBITScommand tree..errtype: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:ERRTypecommand..handshaketype: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:HANDSHAKETypecommand..rap: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:RAPcommand tree..sofframenumber: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SOFFRAMENUMbercommand..specialtype: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPECIALTypecommand..split: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPLitcommand tree..sync: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SYNCcommand tree..syncbits: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SYNCBITScommand tree..syncsearch: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SYNCSEARchcommand..tokentype: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:TOKENTypecommand.
address
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:ADDress command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:ADDress?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:ADDress?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.hivalue: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:ADDress:HIVALuecommand..value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:ADDress:VALuecommand.
condition
property
¶
condition: SearchSearchItemTriggerABusEusbCondition
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:CONDition command.
Description
- This command sets or queries the search type for the specified search. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:CONDition?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:CONDition?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:CONDition valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:CONDition {SYNC|HANDSHAKEPacket|SPECIALPacket|ERRor|TOKENPacket|DATAPacket|RESET|CONNect|CONTROLMESSage|SUSPEND|DEVICEChirp|HOSTChirp|PORTReset|PORTConfiguration|RESUME|EOP}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:CONDition?
Info
SYNCspecifies the search condition as Sync.HANDSHAKEPacketspecifies the search condition as Handshake Packet.SPECIALPacketspecifies the search condition as Special Packet.ERRorspecifies the search condition as Error.TOKENPacketspecifies the search condition as Token (Address) Packet.DATAPacketspecifies the search condition as Data Packet.RESETspecifies the search condition as Reset.CONNectspecifies the search condition as connect.CONTROLMESSagespecifies the search condition as Control Message.SUSPENDspecifies the search condition as Suspend.DEVICEChirpspecifies the search condition as Device chirp.HOSTChirpspecifies the search condition as Host Chirp.PORTResetspecifies the search condition as Port Reset.PORTConfigurationspecifies the search condition as Port Configuration.RESUMEspecifies the search condition as Resume.RAPspecifies the search condition as Register Access Protocol.EOPspecifies the search condition as End of Packet.
data
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:DATa command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:DATa?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:DATa?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.hivalue: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:DATa:HIVALuecommand..offset: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:DATa:OFFSetcommand..qualifier: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:DATa:QUAlifiercommand..size: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:DATa:SIZecommand..type: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:DATa:TYPecommand..value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:DATa:VALuecommand.
databits
property
¶
databits: SearchSearchItemTriggerABusEusbDatabits
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:DATABITS command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:DATABITS?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:DATABITS?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.size: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:DATABITS:SIZecommand.
endpoint
property
¶
endpoint: SearchSearchItemTriggerABusEusbEndpoint
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:ENDPoint command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:ENDPoint?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:ENDPoint?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:ENDPoint:VALuecommand.
endsearch
property
¶
endsearch: SearchSearchItemTriggerABusEusbEndsearch
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:ENDSEARch command.
Description
- This command specifies eUSB Search EOP Bits to be On and Off. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:ENDSEARch?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:ENDSEARch?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:ENDSEARch valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:ENDSEARch {OFF|ON}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:ENDSEARch?
Info
OFFspecifies the EOP bits as OFF (for Low Speed and Full Speed).ONspecifies the EOP bits as ON (for High Speed).
eop
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:EOP command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:EOP?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:EOP?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.databits: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:EOP:DATABITScommand tree..qualifier: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:EOP:QUAlifiercommand.
eopbits
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:EOPBITS command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:EOPBITS?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:EOPBITS?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.max: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:EOPBITS:MAXcommand tree..min: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:EOPBITS:MINcommand tree.
errtype
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:ERRType command.
Description
- This command specifies the eUSB trigger type to be valid on a PID, Token CRC5, Data CRC16, or Bit stuffing condition. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:ERRType?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:ERRType?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:ERRType valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:ERRType {BITSTUFFing|CRC5|CRC16|PID}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:ERRType?
Info
BITSTUFFingspecifies the error type as Bit Stuffing.CRC5specifies the error type as Token CRC5 (Cyclic Redundancy Check 5).CRC16specifies the error type as Data CRC16 (Cyclic Redundancy Check 16).PIDspecifies the error type as PID Check Bits.
handshaketype
property
¶
handshaketype: SearchSearchItemTriggerABusEusbHandshaketype
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:HANDSHAKEType command.
Description
- This command specifies the eUSB trigger type to be valid on any, ack, nak, stall, or nyet condition. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:HANDSHAKEType?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:HANDSHAKEType?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:HANDSHAKEType valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:HANDSHAKEType {ANY|ACK|NAK|STALL|NYET}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:HANDSHAKEType?
Info
ANYspecifies the handshake type as Any (0010).ACKspecifies the handshake type as Acknowledgement (positive) (XX10).NAKspecifies the handshake type as Negative Acknowledgment (1010).STALLspecifies the error type as PID Check Bits.NYETspecifies the handshake type as Stall (endpoint is halted or control pipe request not supported) (1110).
rap
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:RAP command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:RAP?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:RAP?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.address: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:RAP:ADDresscommand tree..command: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:RAP:COMMandcommand..data: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:RAP:DATacommand tree..option: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:RAP:OPTioncommand.
sofframenumber
property
¶
sofframenumber: SearchSearchItemTriggerABusEusbSofframenumber
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SOFFRAMENUMber command.
Description
- This command sets the binary frame number to be used when triggering on a eUSB bus signal. The trigger condition must be set to TOKEN. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SOFFRAMENUMber?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SOFFRAMENUMber?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SOFFRAMENUMber valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SOFFRAMENUMber <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SOFFRAMENUMber?
Info
<QString>specifies the binary frame number within the range 000 0000 0000 to 111 1111 1111 (000 hex to 7FF hex).
specialtype
property
¶
specialtype: SearchSearchItemTriggerABusEusbSpecialtype
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPECIALType command.
Description
- This command specifies the eUSB trigger type to be valid on any, err, split, ping, or reserved condition. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPECIALType?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPECIALType?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPECIALType valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPECIALType {ANY|PREamble|ERROr|SPLit|PING|RESERVed}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPECIALType?
Info
ANYspecifies the PID value as Any (XX00).PREamblespecifies the PID value as PRE (1100).ERROrspecifies the PID value as ERR (1100).SPLitspecifies the PID value as Split (1000).PINGspecifies the PID value as PING (0100).RESERVedspecifies the PID value as Reserved (0000).
split
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPLit command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPLit?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPLit?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.et: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPLit:ETcommand tree..hub: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPLit:HUBcommand tree..port: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPLit:PORTcommand tree..sc: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPLit:SCcommand tree..se: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPLit:SEcommand tree.
sync
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SYNC command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SYNC?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SYNC?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.qualifier: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SYNC:QUAlifiercommand.
syncbits
property
¶
syncbits: SearchSearchItemTriggerABusEusbSyncbits
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SYNCBITS command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SYNCBITS?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SYNCBITS?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.max: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SYNCBITS:MAXcommand tree..min: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SYNCBITS:MINcommand tree.
syncsearch
property
¶
syncsearch: SearchSearchItemTriggerABusEusbSyncsearch
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SYNCSEARch command.
Description
- This command specifies eUSB Search Sync Bits to be On and Off. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SYNCSEARch?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SYNCSEARch?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SYNCSEARch valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SYNCSEARch {OFF|ON}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SYNCSEARch?
Info
OFFspecifies the Sync bits as OFF (for Low Speed and Full Speed).ONspecifies the Sync bits as ON (for High Speed).
tokentype
property
¶
tokentype: SearchSearchItemTriggerABusEusbTokentype
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:TOKENType command.
Description
- This command specifies the eUSB trigger type to be valid on any, sof, out, in, or setup condition. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:TOKENType?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:TOKENType?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:TOKENType valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:TOKENType {ANY|SOF|OUT|IN|SETUP}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:TOKENType?
Info
ANYspecifies the token type as Any (XX01).SOFspecifies the token type as Start Of Frame (0101).OUTspecifies the token type as OUT (0001).INspecifies the token type as IN (1001).SETUPspecifies the token type as SETUP (1101).
SearchSearchItemTriggerABusEusbAddress
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:ADDress command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:ADDress?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:ADDress?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.hivalue: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:ADDress:HIVALuecommand..value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:ADDress:VALuecommand.
hivalue
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:ADDress:HIVALue command.
Description
- This command sets the high binary address value to be used when triggering on a eUSB bus signal. The trigger condition must be set to TOKEN.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:ADDress:HIVALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:ADDress:HIVALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:ADDress:HIVALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:ADDress:HIVALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:ADDress:HIVALue?
Info
<QString>specifies the value in the specified valid format. The valid characters are 0, 1, and X (for binary, for hexadecimal, and symbolic).
value
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:ADDress:VALue command.
Description
- This command sets the binary address value to be used when triggering on a eUSB bus signal. The trigger condition must be set to TOKEN. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:ADDress:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:ADDress:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:ADDress:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:ADDress:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:ADDress:VALue?
Info
<QString>specifies the value in the specified valid format. The valid characters are 0, 1, and X (for binary, for hexadecimal, and symbolic).
SearchSearchItemTriggerABusEusbAddressHivalue
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:ADDress:HIVALue command.
Description
- This command sets the high binary address value to be used when triggering on a eUSB bus signal. The trigger condition must be set to TOKEN.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:ADDress:HIVALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:ADDress:HIVALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:ADDress:HIVALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:ADDress:HIVALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:ADDress:HIVALue?
Info
<QString>specifies the value in the specified valid format. The valid characters are 0, 1, and X (for binary, for hexadecimal, and symbolic).
SearchSearchItemTriggerABusEusbAddressValue
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:ADDress:VALue command.
Description
- This command sets the binary address value to be used when triggering on a eUSB bus signal. The trigger condition must be set to TOKEN. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:ADDress:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:ADDress:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:ADDress:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:ADDress:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:ADDress:VALue?
Info
<QString>specifies the value in the specified valid format. The valid characters are 0, 1, and X (for binary, for hexadecimal, and symbolic).
SearchSearchItemTriggerABusEusbCondition
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:CONDition command.
Description
- This command sets or queries the search type for the specified search. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:CONDition?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:CONDition?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:CONDition valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:CONDition {SYNC|HANDSHAKEPacket|SPECIALPacket|ERRor|TOKENPacket|DATAPacket|RESET|CONNect|CONTROLMESSage|SUSPEND|DEVICEChirp|HOSTChirp|PORTReset|PORTConfiguration|RESUME|EOP}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:CONDition?
Info
SYNCspecifies the search condition as Sync.HANDSHAKEPacketspecifies the search condition as Handshake Packet.SPECIALPacketspecifies the search condition as Special Packet.ERRorspecifies the search condition as Error.TOKENPacketspecifies the search condition as Token (Address) Packet.DATAPacketspecifies the search condition as Data Packet.RESETspecifies the search condition as Reset.CONNectspecifies the search condition as connect.CONTROLMESSagespecifies the search condition as Control Message.SUSPENDspecifies the search condition as Suspend.DEVICEChirpspecifies the search condition as Device chirp.HOSTChirpspecifies the search condition as Host Chirp.PORTResetspecifies the search condition as Port Reset.PORTConfigurationspecifies the search condition as Port Configuration.RESUMEspecifies the search condition as Resume.RAPspecifies the search condition as Register Access Protocol.EOPspecifies the search condition as End of Packet.
SearchSearchItemTriggerABusEusbData
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:DATa command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:DATa?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:DATa?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.hivalue: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:DATa:HIVALuecommand..offset: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:DATa:OFFSetcommand..qualifier: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:DATa:QUAlifiercommand..size: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:DATa:SIZecommand..type: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:DATa:TYPecommand..value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:DATa:VALuecommand.
hivalue
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:DATa:HIVALue command.
Description
- This command sets the high binary data value to be used when triggering on a eUSB bus signal. The trigger condition must be set to DATA. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:DATa:HIVALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:DATa:HIVALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:DATa:HIVALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:DATa:HIVALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:DATa:HIVALue?
Info
<QString>specifies the value in the specified valid format. The valid characters are 0, 1, and X (for binary, for hexadecimal, and symbolic).
offset
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:DATa:OFFSet command.
Description
- This command sets the byte offset to look for a data pattern at, in bytes, to be used when triggering on a eUSB bus signal. The trigger condition must be set to DATA. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:DATa:OFFSet?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:DATa:OFFSet?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:DATa:OFFSet valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:DATa:OFFSet <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:DATa:OFFSet?
Info
<NR1>specifies the byte offset. Default offset value is -1. The argument range is -1 to 1024.
qualifier
property
¶
qualifier: SearchSearchItemTriggerABusEusbDataQualifier
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:DATa:QUAlifier command.
Description
- This command sets the qualifier to be used when triggering on a eUSB bus signal. The trigger condition must be set to IDANDDATA OR DATA. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:DATa:QUAlifier?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:DATa:QUAlifier?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:DATa:QUAlifier valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:DATa:QUAlifier {EQual|UNEQual|LESSthan|MOREthan|LESSEQual|MOREEQual|Inrange|OUTrange}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:DATa:QUAlifier?
Info
EQualspecifies the qualifier as Equal.UNEQualspecifies the qualifier as Not Equal to.LESSthanspecifies the qualifier as Less Than.MOREthanspecifies the qualifier as More Than.LESSEQualspecifies the qualifier as Less Than or Equal to.MOREEQualspecifies the qualifier as More Than or Equal to.Inrangespecifies the qualifier as Inside Range.OUTrangespecifies the qualifier as Out of Range.
size
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:DATa:SIZe command.
Description
- This command sets the length of the data string, in bytes, to be used when triggering on a eUSB bus signal. The trigger condition must be set to DATA. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:DATa:SIZe?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:DATa:SIZe?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:DATa:SIZe valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:DATa:SIZe <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:DATa:SIZe?
Info
<NR1>specifies the length of the data string. Default data size value is 1. The argument range is 1 to 16 bytes.
type
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:DATa:TYPe command.
Description
- This command specifies the eUSB trigger type to be valid on any, data0, data1, data2, or mdata condition. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:DATa:TYPe?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:DATa:TYPe?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:DATa:TYPe valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:DATa:TYPe {ANY|DATA0|DATA1|DATA2|MDATA}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:DATa:TYPe?
Info
ANYspecifies either a DATA0 or DATA1 data packet type.DATA0specifies a DATA0 data packet type.DATA1specifies a DATA1 data packet type.DATA2specifies a DATA2 data packet type when on HIGH speed.MDATAspecifies a MDATA data packet type when on HIGH speed.
value
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:DATa:VALue command.
Description
- This command sets the binary data value to be used when triggering on a eUSB bus signal. The trigger condition must be set to DATA. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:DATa:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:DATa:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:DATa:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:DATa:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:DATa:VALue?
Info
<QString>specifies the value in the specified valid format. The valid characters are 0, 1, and X (for binary, for hexadecimal, and symbolic).
SearchSearchItemTriggerABusEusbDataHivalue
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:DATa:HIVALue command.
Description
- This command sets the high binary data value to be used when triggering on a eUSB bus signal. The trigger condition must be set to DATA. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:DATa:HIVALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:DATa:HIVALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:DATa:HIVALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:DATa:HIVALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:DATa:HIVALue?
Info
<QString>specifies the value in the specified valid format. The valid characters are 0, 1, and X (for binary, for hexadecimal, and symbolic).
SearchSearchItemTriggerABusEusbDataOffset
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:DATa:OFFSet command.
Description
- This command sets the byte offset to look for a data pattern at, in bytes, to be used when triggering on a eUSB bus signal. The trigger condition must be set to DATA. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:DATa:OFFSet?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:DATa:OFFSet?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:DATa:OFFSet valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:DATa:OFFSet <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:DATa:OFFSet?
Info
<NR1>specifies the byte offset. Default offset value is -1. The argument range is -1 to 1024.
SearchSearchItemTriggerABusEusbDataQualifier
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:DATa:QUAlifier command.
Description
- This command sets the qualifier to be used when triggering on a eUSB bus signal. The trigger condition must be set to IDANDDATA OR DATA. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:DATa:QUAlifier?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:DATa:QUAlifier?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:DATa:QUAlifier valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:DATa:QUAlifier {EQual|UNEQual|LESSthan|MOREthan|LESSEQual|MOREEQual|Inrange|OUTrange}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:DATa:QUAlifier?
Info
EQualspecifies the qualifier as Equal.UNEQualspecifies the qualifier as Not Equal to.LESSthanspecifies the qualifier as Less Than.MOREthanspecifies the qualifier as More Than.LESSEQualspecifies the qualifier as Less Than or Equal to.MOREEQualspecifies the qualifier as More Than or Equal to.Inrangespecifies the qualifier as Inside Range.OUTrangespecifies the qualifier as Out of Range.
SearchSearchItemTriggerABusEusbDataSize
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:DATa:SIZe command.
Description
- This command sets the length of the data string, in bytes, to be used when triggering on a eUSB bus signal. The trigger condition must be set to DATA. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:DATa:SIZe?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:DATa:SIZe?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:DATa:SIZe valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:DATa:SIZe <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:DATa:SIZe?
Info
<NR1>specifies the length of the data string. Default data size value is 1. The argument range is 1 to 16 bytes.
SearchSearchItemTriggerABusEusbDataType
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:DATa:TYPe command.
Description
- This command specifies the eUSB trigger type to be valid on any, data0, data1, data2, or mdata condition. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:DATa:TYPe?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:DATa:TYPe?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:DATa:TYPe valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:DATa:TYPe {ANY|DATA0|DATA1|DATA2|MDATA}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:DATa:TYPe?
Info
ANYspecifies either a DATA0 or DATA1 data packet type.DATA0specifies a DATA0 data packet type.DATA1specifies a DATA1 data packet type.DATA2specifies a DATA2 data packet type when on HIGH speed.MDATAspecifies a MDATA data packet type when on HIGH speed.
SearchSearchItemTriggerABusEusbDataValue
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:DATa:VALue command.
Description
- This command sets the binary data value to be used when triggering on a eUSB bus signal. The trigger condition must be set to DATA. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:DATa:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:DATa:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:DATa:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:DATa:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:DATa:VALue?
Info
<QString>specifies the value in the specified valid format. The valid characters are 0, 1, and X (for binary, for hexadecimal, and symbolic).
SearchSearchItemTriggerABusEusbDatabits
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:DATABITS command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:DATABITS?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:DATABITS?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.size: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:DATABITS:SIZecommand.
size
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:DATABITS:SIZe command.
Description
- This command sets the number of Sync bits, in bytes, to be used when triggering on a eUSB bus signal. The trigger condition must be set to SYNC. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:DATABITS:SIZe?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:DATABITS:SIZe?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:DATABITS:SIZe valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:DATABITS:SIZe <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:DATABITS:SIZe?
Info
<NR1>specifies the number of the Sync bits. The default Sync bits is 12. The argument range is 12 to 32 bits.
SearchSearchItemTriggerABusEusbDatabitsSize
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:DATABITS:SIZe command.
Description
- This command sets the number of Sync bits, in bytes, to be used when triggering on a eUSB bus signal. The trigger condition must be set to SYNC. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:DATABITS:SIZe?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:DATABITS:SIZe?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:DATABITS:SIZe valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:DATABITS:SIZe <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:DATABITS:SIZe?
Info
<NR1>specifies the number of the Sync bits. The default Sync bits is 12. The argument range is 12 to 32 bits.
SearchSearchItemTriggerABusEusbEndpoint
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:ENDPoint command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:ENDPoint?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:ENDPoint?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:ENDPoint:VALuecommand.
value
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:ENDPoint:VALue command.
Description
- This command sets the endpoint binary value to be used when triggering on a eUSB bus signal. The trigger condition must be set to TOKEN. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:ENDPoint:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:ENDPoint:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:ENDPoint:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:ENDPoint:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:ENDPoint:VALue?
Info
<QString>specifies the data value in the specified valid format. The valid characters are 0, 1, and X for binary format; A-F, 0-9 and X for hexadecimal format.
SearchSearchItemTriggerABusEusbEndpointValue
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:ENDPoint:VALue command.
Description
- This command sets the endpoint binary value to be used when triggering on a eUSB bus signal. The trigger condition must be set to TOKEN. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:ENDPoint:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:ENDPoint:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:ENDPoint:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:ENDPoint:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:ENDPoint:VALue?
Info
<QString>specifies the data value in the specified valid format. The valid characters are 0, 1, and X for binary format; A-F, 0-9 and X for hexadecimal format.
SearchSearchItemTriggerABusEusbEndsearch
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:ENDSEARch command.
Description
- This command specifies eUSB Search EOP Bits to be On and Off. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:ENDSEARch?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:ENDSEARch?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:ENDSEARch valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:ENDSEARch {OFF|ON}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:ENDSEARch?
Info
OFFspecifies the EOP bits as OFF (for Low Speed and Full Speed).ONspecifies the EOP bits as ON (for High Speed).
SearchSearchItemTriggerABusEusbEop
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:EOP command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:EOP?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:EOP?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.databits: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:EOP:DATABITScommand tree..qualifier: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:EOP:QUAlifiercommand.
databits
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:EOP:DATABITS command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:EOP:DATABITS?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:EOP:DATABITS?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.size: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:EOP:DATABITS:SIZecommand.
qualifier
property
¶
qualifier: SearchSearchItemTriggerABusEusbEopQualifier
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:EOP:QUAlifier command.
Description
- This command sets the qualifier to be used when triggering on a eUSB bus signal. The trigger condition must be set to EOP Bits. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:EOP:QUAlifier?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:EOP:QUAlifier?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:EOP:QUAlifier valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:EOP:QUAlifier {EQual|UNEQual|LESSthan|MOREthan|LESSEQual|MOREEQual|INrange|OUTrange}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:EOP:QUAlifier?
Info
EQualspecifies the qualifier as Equal.UNEQualspecifies the qualifier as Not Equal to.LESSthanspecifies the qualifier as Less Than.MOREthanspecifies the qualifier as More Than.LESSEQualspecifies the qualifier as Less Than or Equal to.MOREEQualspecifies the qualifier as More Than or Equal to.INrangespecifies the qualifier as Inside Range.OUTrangespecifies the qualifier as Out of Range.
SearchSearchItemTriggerABusEusbEopDatabits
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:EOP:DATABITS command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:EOP:DATABITS?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:EOP:DATABITS?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.size: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:EOP:DATABITS:SIZecommand.
size
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:EOP:DATABITS:SIZe command.
Description
- This command sets the number of EOP bits, in bytes, to be used when triggering on a eUSB bus signal. The trigger condition must be set to EOP. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:EOP:DATABITS:SIZe?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:EOP:DATABITS:SIZe?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:EOP:DATABITS:SIZe valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:EOP:DATABITS:SIZe <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:EOP:DATABITS:SIZe?
Info
<NR1>specifies the number of EOP bits. The default EOP bits is 8. The argument range is 8 to 100 bits.
SearchSearchItemTriggerABusEusbEopDatabitsSize
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:EOP:DATABITS:SIZe command.
Description
- This command sets the number of EOP bits, in bytes, to be used when triggering on a eUSB bus signal. The trigger condition must be set to EOP. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:EOP:DATABITS:SIZe?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:EOP:DATABITS:SIZe?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:EOP:DATABITS:SIZe valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:EOP:DATABITS:SIZe <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:EOP:DATABITS:SIZe?
Info
<NR1>specifies the number of EOP bits. The default EOP bits is 8. The argument range is 8 to 100 bits.
SearchSearchItemTriggerABusEusbEopQualifier
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:EOP:QUAlifier command.
Description
- This command sets the qualifier to be used when triggering on a eUSB bus signal. The trigger condition must be set to EOP Bits. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:EOP:QUAlifier?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:EOP:QUAlifier?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:EOP:QUAlifier valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:EOP:QUAlifier {EQual|UNEQual|LESSthan|MOREthan|LESSEQual|MOREEQual|INrange|OUTrange}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:EOP:QUAlifier?
Info
EQualspecifies the qualifier as Equal.UNEQualspecifies the qualifier as Not Equal to.LESSthanspecifies the qualifier as Less Than.MOREthanspecifies the qualifier as More Than.LESSEQualspecifies the qualifier as Less Than or Equal to.MOREEQualspecifies the qualifier as More Than or Equal to.INrangespecifies the qualifier as Inside Range.OUTrangespecifies the qualifier as Out of Range.
SearchSearchItemTriggerABusEusbEopbits
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:EOPBITS command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:EOPBITS?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:EOPBITS?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.max: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:EOPBITS:MAXcommand tree..min: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:EOPBITS:MINcommand tree.
max
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:EOPBITS:MAX command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:EOPBITS:MAX?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:EOPBITS:MAX?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.size: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:EOPBITS:MAX:SIZecommand.
min
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:EOPBITS:MIN command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:EOPBITS:MIN?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:EOPBITS:MIN?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.size: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:EOPBITS:MIN:SIZecommand.
SearchSearchItemTriggerABusEusbEopbitsMax
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:EOPBITS:MAX command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:EOPBITS:MAX?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:EOPBITS:MAX?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.size: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:EOPBITS:MAX:SIZecommand.
size
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:EOPBITS:MAX:SIZe command.
Description
- This command sets the number of EOP bits to be used when triggering on a eUSB bus signal. The trigger condition must be set to EOP. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:EOPBITS:MAX:SIZe?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:EOPBITS:MAX:SIZe?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:EOPBITS:MAX:SIZe valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:EOPBITS:MAX:SIZe <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:EOPBITS:MAX:SIZe?
Info
<NR1>specifies the number of EOP bits. The default maximum EOP bits is 100. The argument range is 9 to 100 bits.
SearchSearchItemTriggerABusEusbEopbitsMaxSize
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:EOPBITS:MAX:SIZe command.
Description
- This command sets the number of EOP bits to be used when triggering on a eUSB bus signal. The trigger condition must be set to EOP. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:EOPBITS:MAX:SIZe?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:EOPBITS:MAX:SIZe?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:EOPBITS:MAX:SIZe valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:EOPBITS:MAX:SIZe <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:EOPBITS:MAX:SIZe?
Info
<NR1>specifies the number of EOP bits. The default maximum EOP bits is 100. The argument range is 9 to 100 bits.
SearchSearchItemTriggerABusEusbEopbitsMin
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:EOPBITS:MIN command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:EOPBITS:MIN?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:EOPBITS:MIN?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.size: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:EOPBITS:MIN:SIZecommand.
size
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:EOPBITS:MIN:SIZe command.
Description
- This command sets the number of EOP bits to be used when triggering on a eUSB bus signal. The trigger condition must be set to EOP. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:EOPBITS:MIN:SIZe?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:EOPBITS:MIN:SIZe?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:EOPBITS:MIN:SIZe valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:EOPBITS:MIN:SIZe <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:EOPBITS:MIN:SIZe?
Info
<NR1>specifies the number of EOP bits. The default minimum EOP bits is 8. The argument range is 8 to 99 bits.
SearchSearchItemTriggerABusEusbEopbitsMinSize
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:EOPBITS:MIN:SIZe command.
Description
- This command sets the number of EOP bits to be used when triggering on a eUSB bus signal. The trigger condition must be set to EOP. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:EOPBITS:MIN:SIZe?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:EOPBITS:MIN:SIZe?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:EOPBITS:MIN:SIZe valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:EOPBITS:MIN:SIZe <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:EOPBITS:MIN:SIZe?
Info
<NR1>specifies the number of EOP bits. The default minimum EOP bits is 8. The argument range is 8 to 99 bits.
SearchSearchItemTriggerABusEusbErrtype
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:ERRType command.
Description
- This command specifies the eUSB trigger type to be valid on a PID, Token CRC5, Data CRC16, or Bit stuffing condition. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:ERRType?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:ERRType?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:ERRType valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:ERRType {BITSTUFFing|CRC5|CRC16|PID}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:ERRType?
Info
BITSTUFFingspecifies the error type as Bit Stuffing.CRC5specifies the error type as Token CRC5 (Cyclic Redundancy Check 5).CRC16specifies the error type as Data CRC16 (Cyclic Redundancy Check 16).PIDspecifies the error type as PID Check Bits.
SearchSearchItemTriggerABusEusbHandshaketype
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:HANDSHAKEType command.
Description
- This command specifies the eUSB trigger type to be valid on any, ack, nak, stall, or nyet condition. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:HANDSHAKEType?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:HANDSHAKEType?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:HANDSHAKEType valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:HANDSHAKEType {ANY|ACK|NAK|STALL|NYET}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:HANDSHAKEType?
Info
ANYspecifies the handshake type as Any (0010).ACKspecifies the handshake type as Acknowledgement (positive) (XX10).NAKspecifies the handshake type as Negative Acknowledgment (1010).STALLspecifies the error type as PID Check Bits.NYETspecifies the handshake type as Stall (endpoint is halted or control pipe request not supported) (1110).
SearchSearchItemTriggerABusEusbRap
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:RAP command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:RAP?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:RAP?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.address: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:RAP:ADDresscommand tree..command: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:RAP:COMMandcommand..data: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:RAP:DATacommand tree..option: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:RAP:OPTioncommand.
address
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:RAP:ADDress command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:RAP:ADDress?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:RAP:ADDress?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:RAP:ADDress:VALuecommand.
command
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:RAP:COMMand command.
Description
- This command specifies the eUSB Register Access Protocol search option. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:RAP:COMMand?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:RAP:COMMand?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:RAP:COMMand valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:RAP:COMMand {ALL|WRITe|READ|CLEar|SET}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:RAP:COMMand?
Info
ALLspecifies the RAP command as All.WRITespecifies the RAP command as Write.READspecifies the RAP command as Read.CLEarspecifies the RAP command as Clear.SETspecifies the RAP command as Set.
data
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:RAP:DATa command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:RAP:DATa?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:RAP:DATa?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:RAP:DATa:VALuecommand.
option
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:RAP:OPTion command.
Description
- This command specifies the eUSB Register Access Protocol search option. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:RAP:OPTion?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:RAP:OPTion?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:RAP:OPTion valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:RAP:OPTion {COMMand|ADDRess|RAPDATa}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:RAP:OPTion?
Info
COMMandspecifies the RAP option as Command.ADDRessspecifies the RAP option as Address.RAPDATaspecifies the RAP option as RapData.
SearchSearchItemTriggerABusEusbRapAddress
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:RAP:ADDress command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:RAP:ADDress?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:RAP:ADDress?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:RAP:ADDress:VALuecommand.
value
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:RAP:ADDress:VALue command.
Description
- This command sets the binary Register Access Protocol address value to be used when triggering on a eUSB bus signal. The trigger condition must be set to TOKEN. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:RAP:ADDress:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:RAP:ADDress:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:RAP:ADDress:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:RAP:ADDress:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:RAP:ADDress:VALue?
Info
<QString>specifies the value in the specified valid format. The valid characters are 0, 1, and X for binary; for hexadecimal; and symbolic.
SearchSearchItemTriggerABusEusbRapAddressValue
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:RAP:ADDress:VALue command.
Description
- This command sets the binary Register Access Protocol address value to be used when triggering on a eUSB bus signal. The trigger condition must be set to TOKEN. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:RAP:ADDress:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:RAP:ADDress:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:RAP:ADDress:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:RAP:ADDress:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:RAP:ADDress:VALue?
Info
<QString>specifies the value in the specified valid format. The valid characters are 0, 1, and X for binary; for hexadecimal; and symbolic.
SearchSearchItemTriggerABusEusbRapCommand
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:RAP:COMMand command.
Description
- This command specifies the eUSB Register Access Protocol search option. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:RAP:COMMand?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:RAP:COMMand?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:RAP:COMMand valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:RAP:COMMand {ALL|WRITe|READ|CLEar|SET}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:RAP:COMMand?
Info
ALLspecifies the RAP command as All.WRITespecifies the RAP command as Write.READspecifies the RAP command as Read.CLEarspecifies the RAP command as Clear.SETspecifies the RAP command as Set.
SearchSearchItemTriggerABusEusbRapData
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:RAP:DATa command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:RAP:DATa?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:RAP:DATa?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:RAP:DATa:VALuecommand.
value
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:RAP:DATa:VALue command.
Description
- This command sets the binary Register Access Protocol data value to be used when triggering on a eUSB bus signal. The trigger condition must be set to TOKEN. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:RAP:DATa:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:RAP:DATa:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:RAP:DATa:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:RAP:DATa:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:RAP:DATa:VALue?
Info
<QString>specifies the value in the specified valid format. The valid characters are 0, 1, and X for binary; for hexadecimal; and symbolic.
SearchSearchItemTriggerABusEusbRapDataValue
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:RAP:DATa:VALue command.
Description
- This command sets the binary Register Access Protocol data value to be used when triggering on a eUSB bus signal. The trigger condition must be set to TOKEN. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:RAP:DATa:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:RAP:DATa:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:RAP:DATa:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:RAP:DATa:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:RAP:DATa:VALue?
Info
<QString>specifies the value in the specified valid format. The valid characters are 0, 1, and X for binary; for hexadecimal; and symbolic.
SearchSearchItemTriggerABusEusbRapOption
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:RAP:OPTion command.
Description
- This command specifies the eUSB Register Access Protocol search option. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:RAP:OPTion?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:RAP:OPTion?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:RAP:OPTion valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:RAP:OPTion {COMMand|ADDRess|RAPDATa}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:RAP:OPTion?
Info
COMMandspecifies the RAP option as Command.ADDRessspecifies the RAP option as Address.RAPDATaspecifies the RAP option as RapData.
SearchSearchItemTriggerABusEusbSofframenumber
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SOFFRAMENUMber command.
Description
- This command sets the binary frame number to be used when triggering on a eUSB bus signal. The trigger condition must be set to TOKEN. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SOFFRAMENUMber?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SOFFRAMENUMber?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SOFFRAMENUMber valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SOFFRAMENUMber <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SOFFRAMENUMber?
Info
<QString>specifies the binary frame number within the range 000 0000 0000 to 111 1111 1111 (000 hex to 7FF hex).
SearchSearchItemTriggerABusEusbSpecialtype
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPECIALType command.
Description
- This command specifies the eUSB trigger type to be valid on any, err, split, ping, or reserved condition. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPECIALType?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPECIALType?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPECIALType valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPECIALType {ANY|PREamble|ERROr|SPLit|PING|RESERVed}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPECIALType?
Info
ANYspecifies the PID value as Any (XX00).PREamblespecifies the PID value as PRE (1100).ERROrspecifies the PID value as ERR (1100).SPLitspecifies the PID value as Split (1000).PINGspecifies the PID value as PING (0100).RESERVedspecifies the PID value as Reserved (0000).
SearchSearchItemTriggerABusEusbSplit
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPLit command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPLit?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPLit?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.et: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPLit:ETcommand tree..hub: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPLit:HUBcommand tree..port: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPLit:PORTcommand tree..sc: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPLit:SCcommand tree..se: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPLit:SEcommand tree.
et
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPLit:ET command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPLit:ET?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPLit:ET?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPLit:ET:VALuecommand.
hub
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPLit:HUB command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPLit:HUB?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPLit:HUB?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPLit:HUB:VALuecommand.
port
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPLit:PORT command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPLit:PORT?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPLit:PORT?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPLit:PORT:VALuecommand.
sc
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPLit:SC command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPLit:SC?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPLit:SC?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPLit:SC:VALuecommand.
se
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPLit:SE command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPLit:SE?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPLit:SE?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPLit:SE:VALuecommand.
SearchSearchItemTriggerABusEusbSplitEt
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPLit:ET command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPLit:ET?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPLit:ET?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPLit:ET:VALuecommand.
value
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPLit:ET:VALue command.
Description
- This command specifies the eUSB trigger type endpoint condition. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPLit:ET:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPLit:ET:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPLit:ET:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPLit:ET:VALue {NOCARE|CONTRol|ISOchronous|BULK|INTERRUPT}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPLit:ET:VALue?
Info
NOCAREspecifies the Endpoint Type value as Don’t Care.CONTRolspecifies the Endpoint Type value as Control (00).ISOchronousspecifies the Endpoint Type value as Isochronous (01).BULKspecifies the Endpoint Type value as Bulk (10).INTERRUPTspecifies the Endpoint Type value as Interrupt (11).
SearchSearchItemTriggerABusEusbSplitEtValue
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPLit:ET:VALue command.
Description
- This command specifies the eUSB trigger type endpoint condition. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPLit:ET:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPLit:ET:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPLit:ET:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPLit:ET:VALue {NOCARE|CONTRol|ISOchronous|BULK|INTERRUPT}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPLit:ET:VALue?
Info
NOCAREspecifies the Endpoint Type value as Don’t Care.CONTRolspecifies the Endpoint Type value as Control (00).ISOchronousspecifies the Endpoint Type value as Isochronous (01).BULKspecifies the Endpoint Type value as Bulk (10).INTERRUPTspecifies the Endpoint Type value as Interrupt (11).
SearchSearchItemTriggerABusEusbSplitHub
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPLit:HUB command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPLit:HUB?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPLit:HUB?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPLit:HUB:VALuecommand.
value
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPLit:HUB:VALue command.
Description
- This command sets the binary hub address value to be used when triggering on a eUSB bus signal. The trigger condition must be set to Special with packet type SPLIT. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPLit:HUB:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPLit:HUB:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPLit:HUB:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPLit:HUB:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPLit:HUB:VALue?
Info
<QString>specifies the value in the specified valid format. The valid characters are 0, 1, and X (for binary, for hexadecimal, and symbolic).
SearchSearchItemTriggerABusEusbSplitHubValue
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPLit:HUB:VALue command.
Description
- This command sets the binary hub address value to be used when triggering on a eUSB bus signal. The trigger condition must be set to Special with packet type SPLIT. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPLit:HUB:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPLit:HUB:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPLit:HUB:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPLit:HUB:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPLit:HUB:VALue?
Info
<QString>specifies the value in the specified valid format. The valid characters are 0, 1, and X (for binary, for hexadecimal, and symbolic).
SearchSearchItemTriggerABusEusbSplitPort
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPLit:PORT command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPLit:PORT?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPLit:PORT?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPLit:PORT:VALuecommand.
value
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPLit:PORT:VALue command.
Description
- This command sets the binary port address value to be used when triggering on a eUSB bus signal. The trigger condition must be set to Special with a packet type SPLIT. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPLit:PORT:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPLit:PORT:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPLit:PORT:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPLit:PORT:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPLit:PORT:VALue?
Info
<QString>specifies the value in the specified valid format. The valid characters are 0, 1, and X (for binary, for hexadecimal, and symbolic).
SearchSearchItemTriggerABusEusbSplitPortValue
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPLit:PORT:VALue command.
Description
- This command sets the binary port address value to be used when triggering on a eUSB bus signal. The trigger condition must be set to Special with a packet type SPLIT. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPLit:PORT:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPLit:PORT:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPLit:PORT:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPLit:PORT:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPLit:PORT:VALue?
Info
<QString>specifies the value in the specified valid format. The valid characters are 0, 1, and X (for binary, for hexadecimal, and symbolic).
SearchSearchItemTriggerABusEusbSplitSc
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPLit:SC command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPLit:SC?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPLit:SC?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPLit:SC:VALuecommand.
value
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPLit:SC:VALue command.
Description
- This command specifies the eUSB trigger type start/complete condition. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPLit:SC:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPLit:SC:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPLit:SC:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPLit:SC:VALue {NOCARE|SSPLIT|CSPLIT}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPLit:SC:VALue?
Info
NOCAREsets the trigger on either the start or complete phase of the split transaction.SSPLITsets the trigger on the start phase of the split transaction.CSPLITsets the trigger on the complete phase of the split transaction.
SearchSearchItemTriggerABusEusbSplitScValue
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPLit:SC:VALue command.
Description
- This command specifies the eUSB trigger type start/complete condition. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPLit:SC:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPLit:SC:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPLit:SC:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPLit:SC:VALue {NOCARE|SSPLIT|CSPLIT}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPLit:SC:VALue?
Info
NOCAREsets the trigger on either the start or complete phase of the split transaction.SSPLITsets the trigger on the start phase of the split transaction.CSPLITsets the trigger on the complete phase of the split transaction.
SearchSearchItemTriggerABusEusbSplitSe
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPLit:SE command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPLit:SE?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPLit:SE?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPLit:SE:VALuecommand.
value
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPLit:SE:VALue command.
Description
- This command specifies the eUSB trigger type start/complete condition. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPLit:SE:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPLit:SE:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPLit:SE:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPLit:SE:VALue {NOCARE|FULLSPEED|LOWSPEED|ISOSTART|ISOMID|ISOEND|ISOALL}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPLit:SE:VALue?
Info
NOCAREsets the trigger on any combination of S and E bits.FULLSPEEDsets the trigger on S bit = 0 and E bit = 0.LOWSPEEDsets the trigger on S bit = 1 and E bit = 0.ISOSTARTsets the trigger on S bit = 1, E bit = 0.ISOMIDspecifies Isochronous Data is Middle (00) Start/End bit value.ISOENDspecifies Isochronous Data is End (01) Start/End bit value.ISOALLspecifies Isochronous Data is All (11) Start/End bit value.
SearchSearchItemTriggerABusEusbSplitSeValue
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPLit:SE:VALue command.
Description
- This command specifies the eUSB trigger type start/complete condition. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPLit:SE:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPLit:SE:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPLit:SE:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPLit:SE:VALue {NOCARE|FULLSPEED|LOWSPEED|ISOSTART|ISOMID|ISOEND|ISOALL}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SPLit:SE:VALue?
Info
NOCAREsets the trigger on any combination of S and E bits.FULLSPEEDsets the trigger on S bit = 0 and E bit = 0.LOWSPEEDsets the trigger on S bit = 1 and E bit = 0.ISOSTARTsets the trigger on S bit = 1, E bit = 0.ISOMIDspecifies Isochronous Data is Middle (00) Start/End bit value.ISOENDspecifies Isochronous Data is End (01) Start/End bit value.ISOALLspecifies Isochronous Data is All (11) Start/End bit value.
SearchSearchItemTriggerABusEusbSync
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SYNC command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SYNC?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SYNC?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.qualifier: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SYNC:QUAlifiercommand.
qualifier
property
¶
qualifier: SearchSearchItemTriggerABusEusbSyncQualifier
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SYNC:QUAlifier command.
Description
- This command sets the qualifier to be used when triggering on a eUSB bus signal. The trigger condition must be set to Sync Bits. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SYNC:QUAlifier?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SYNC:QUAlifier?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SYNC:QUAlifier valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SYNC:QUAlifier {EQual|UNEQual|LESSthan|MOREthan|LESSEQual|MOREEQual|INrange|OUTrange}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SYNC:QUAlifier?
Info
EQualspecifies the qualifier as Equal.UNEQualspecifies the qualifier as Not Equal to.LESSthanspecifies the qualifier as Less Than.MOREthanspecifies the qualifier as More Than.LESSEQualspecifies the qualifier as Less Than or Equal to.MOREEQualspecifies the qualifier as More Than or Equal to.INrangespecifies the qualifier as Inside Range.OUTrangespecifies the qualifier as Out of Range.
SearchSearchItemTriggerABusEusbSyncQualifier
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SYNC:QUAlifier command.
Description
- This command sets the qualifier to be used when triggering on a eUSB bus signal. The trigger condition must be set to Sync Bits. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SYNC:QUAlifier?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SYNC:QUAlifier?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SYNC:QUAlifier valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SYNC:QUAlifier {EQual|UNEQual|LESSthan|MOREthan|LESSEQual|MOREEQual|INrange|OUTrange}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SYNC:QUAlifier?
Info
EQualspecifies the qualifier as Equal.UNEQualspecifies the qualifier as Not Equal to.LESSthanspecifies the qualifier as Less Than.MOREthanspecifies the qualifier as More Than.LESSEQualspecifies the qualifier as Less Than or Equal to.MOREEQualspecifies the qualifier as More Than or Equal to.INrangespecifies the qualifier as Inside Range.OUTrangespecifies the qualifier as Out of Range.
SearchSearchItemTriggerABusEusbSyncbits
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SYNCBITS command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SYNCBITS?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SYNCBITS?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.max: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SYNCBITS:MAXcommand tree..min: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SYNCBITS:MINcommand tree.
max
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SYNCBITS:MAX command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SYNCBITS:MAX?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SYNCBITS:MAX?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.size: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SYNCBITS:MAX:SIZecommand.
min
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SYNCBITS:MIN command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SYNCBITS:MIN?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SYNCBITS:MIN?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.size: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SYNCBITS:MIN:SIZecommand.
SearchSearchItemTriggerABusEusbSyncbitsMax
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SYNCBITS:MAX command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SYNCBITS:MAX?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SYNCBITS:MAX?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.size: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SYNCBITS:MAX:SIZecommand.
size
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SYNCBITS:MAX:SIZe command.
Description
- This command sets the number of sync bits, to be used when triggering on a eUSB bus signal. The trigger condition must be set to SYNC. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SYNCBITS:MAX:SIZe?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SYNCBITS:MAX:SIZe?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SYNCBITS:MAX:SIZe valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SYNCBITS:MAX:SIZe <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SYNCBITS:MAX:SIZe?
Info
<NR1>specifies the number of sync bits. The default maximum Sync bits is 32. The argument range is 13 to 32 bits.
SearchSearchItemTriggerABusEusbSyncbitsMaxSize
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SYNCBITS:MAX:SIZe command.
Description
- This command sets the number of sync bits, to be used when triggering on a eUSB bus signal. The trigger condition must be set to SYNC. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SYNCBITS:MAX:SIZe?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SYNCBITS:MAX:SIZe?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SYNCBITS:MAX:SIZe valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SYNCBITS:MAX:SIZe <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SYNCBITS:MAX:SIZe?
Info
<NR1>specifies the number of sync bits. The default maximum Sync bits is 32. The argument range is 13 to 32 bits.
SearchSearchItemTriggerABusEusbSyncbitsMin
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SYNCBITS:MIN command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SYNCBITS:MIN?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SYNCBITS:MIN?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.size: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SYNCBITS:MIN:SIZecommand.
size
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SYNCBITS:MIN:SIZe command.
Description
- This command sets the number of sync bits, in bits, to be used when triggering on a eUSB bus signal. The trigger condition must be set to SYNC. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SYNCBITS:MIN:SIZe?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SYNCBITS:MIN:SIZe?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SYNCBITS:MIN:SIZe valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SYNCBITS:MIN:SIZe <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SYNCBITS:MIN:SIZe?
Info
<NR1>specifies the number of sync bits. The default minimum Sync bits is 12. The argument range is 12 to 31 bits.
SearchSearchItemTriggerABusEusbSyncbitsMinSize
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SYNCBITS:MIN:SIZe command.
Description
- This command sets the number of sync bits, in bits, to be used when triggering on a eUSB bus signal. The trigger condition must be set to SYNC. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SYNCBITS:MIN:SIZe?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SYNCBITS:MIN:SIZe?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SYNCBITS:MIN:SIZe valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SYNCBITS:MIN:SIZe <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SYNCBITS:MIN:SIZe?
Info
<NR1>specifies the number of sync bits. The default minimum Sync bits is 12. The argument range is 12 to 31 bits.
SearchSearchItemTriggerABusEusbSyncsearch
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SYNCSEARch command.
Description
- This command specifies eUSB Search Sync Bits to be On and Off. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SYNCSEARch?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SYNCSEARch?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SYNCSEARch valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SYNCSEARch {OFF|ON}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:SYNCSEARch?
Info
OFFspecifies the Sync bits as OFF (for Low Speed and Full Speed).ONspecifies the Sync bits as ON (for High Speed).
SearchSearchItemTriggerABusEusbTokentype
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:TOKENType command.
Description
- This command specifies the eUSB trigger type to be valid on any, sof, out, in, or setup condition. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:TOKENType?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:TOKENType?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:TOKENType valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:TOKENType {ANY|SOF|OUT|IN|SETUP}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:EUSB:TOKENType?
Info
ANYspecifies the token type as Any (XX01).SOFspecifies the token type as Start Of Frame (0101).OUTspecifies the token type as OUT (0001).INspecifies the token type as IN (1001).SETUPspecifies the token type as SETUP (1101).
SearchSearchItemTriggerABusFlexray
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.condition: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:CONDitioncommand..cyclecount: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:CYCLEcountcommand tree..data: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:DATacommand tree..eoftype: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:EOFTYPEcommand..errtype: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:ERRTYPEcommand..frameid: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:FRAMEIDcommand tree..frametype: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:FRAMETypecommand..header: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:HEADERcommand tree.
condition
property
¶
condition: SearchSearchItemTriggerABusFlexrayCondition
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:CONDition command.
Description
- This command sets or queries the FlexRay bus search condition. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:CONDition?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:CONDition?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:CONDition valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:CONDition {SOF|FRAMEType|IDentifier|CYCLEcount|HEADer|DATA|IDANDDATA|EOF|ERRor}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:CONDition?
Info
SOFsets the trigger condition to start of frame.FRAMETypesets the trigger condition to frame type.IDentifiersets the trigger condition to identifier.CYCLEcountsets the trigger condition to cycle count.HEADersets the trigger condition to header.DATAsets the trigger condition to data.IDANDDATAsets the trigger condition to ID and data.EOFsets the trigger condition to end of frame.ERRorsets the trigger condition to error.
cyclecount
property
¶
cyclecount: SearchSearchItemTriggerABusFlexrayCyclecount
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:CYCLEcount command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:CYCLEcount?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:CYCLEcount?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.hivalue: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:CYCLEcount:HIVALuecommand..qualifier: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:CYCLEcount:QUALifiercommand..value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:CYCLEcount:VALuecommand.
data
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:DATa command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:DATa?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:DATa?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.hivalue: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:DATa:HIVALuecommand..offset: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:DATa:OFFSetcommand..qualifier: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:DATa:QUALifiercommand..size: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:DATa:SIZecommand..value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:DATa:VALuecommand.
eoftype
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:EOFTYPE command.
Description
- This command sets or queries the end of frame type when searching on a FlexRay bus signal. The search number is specified by x. The search condition must be set to EOF.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:EOFTYPE?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:EOFTYPE?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:EOFTYPE valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:EOFTYPE {ANY|STATIC|DYNAMIC}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:EOFTYPE?
Info
ANYspecifies either end of file type.STATICspecifies the static end of file type.DYNAMICspecifies the static end of file type.
errtype
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:ERRTYPE command.
Description
- This command sets or queries the error type when searching on a FlexRay bus signal. The search number is specified by x. The search condition must be set to ERROR.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:ERRTYPE?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:ERRTYPE?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:ERRTYPE valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:ERRTYPE {CRCHeader|CRCTrailer|NULLFRStatic|NULLFRDynamic|SYNCFrame|STARTupnosync}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:ERRTYPE?
Info
CRCHeadersets the error type to CRCHeader.CRCTrailersets the error type to CRCTrailer.NULLFRStaticsets the error type to NULLFRStatic.NULLFRDynamicsets the error type to NULLFRDynamic.SYNCFramesets the error type to SYNCFrame.STARTupnosyncsets the error type to STARTupnosync.
frameid
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:FRAMEID command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:FRAMEID?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:FRAMEID?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.hivalue: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:FRAMEID:HIVALuecommand..qualifier: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:FRAMEID:QUALifiercommand..value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:FRAMEID:VALuecommand.
frametype
property
¶
frametype: SearchSearchItemTriggerABusFlexrayFrametype
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:FRAMEType command.
Description
- This command sets or queries the FLEXRAY bus search trigger frame type. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:FRAMEType?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:FRAMEType?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:FRAMEType valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:FRAMEType {NORMal|PAYload|NULL|SYNC|STARTup}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:FRAMEType?
Info
NORMalsets the frame type to normal.PAYloadsets the frame type to payload.NULLsets the frame type to null.SYNCsets the frame type to sync.STARTupsets the frame type to startup.
header
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:HEADER command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:HEADER?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:HEADER?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.crc: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:HEADER:CRCcommand..cyclecount: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:HEADER:CYCLECountcommand..frameid: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:HEADER:FRAMEIDcommand..indbits: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:HEADER:INDBitscommand..paylength: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:HEADER:PAYLENgthcommand.
SearchSearchItemTriggerABusFlexrayCondition
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:CONDition command.
Description
- This command sets or queries the FlexRay bus search condition. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:CONDition?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:CONDition?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:CONDition valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:CONDition {SOF|FRAMEType|IDentifier|CYCLEcount|HEADer|DATA|IDANDDATA|EOF|ERRor}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:CONDition?
Info
SOFsets the trigger condition to start of frame.FRAMETypesets the trigger condition to frame type.IDentifiersets the trigger condition to identifier.CYCLEcountsets the trigger condition to cycle count.HEADersets the trigger condition to header.DATAsets the trigger condition to data.IDANDDATAsets the trigger condition to ID and data.EOFsets the trigger condition to end of frame.ERRorsets the trigger condition to error.
SearchSearchItemTriggerABusFlexrayCyclecount
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:CYCLEcount command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:CYCLEcount?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:CYCLEcount?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.hivalue: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:CYCLEcount:HIVALuecommand..qualifier: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:CYCLEcount:QUALifiercommand..value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:CYCLEcount:VALuecommand.
hivalue
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:CYCLEcount:HIVALue command.
Description
- This command sets or queries the heigh value when searching on a FlexRay bus cycle count field. The search number is specified by x. The search condition must be set to CYCLEcount.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:CYCLEcount:HIVALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:CYCLEcount:HIVALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:CYCLEcount:HIVALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:CYCLEcount:HIVALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:CYCLEcount:HIVALue?
Info
<QString>specifies the cycle count value.
qualifier
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:CYCLEcount:QUALifier command.
Description
- This command sets or queries the qualifier to be used when searching on a FlexRay bus search cycle count field. The search number is specified by x. The search condition must be set to CYCLEcount.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:CYCLEcount:QUALifier?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:CYCLEcount:QUALifier?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:CYCLEcount:QUALifier valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:CYCLEcount:QUALifier {EQUal|LESSEQual|MOREEQual|UNEQual|LESSthan|MOREthan|INrange|OUTrange}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:CYCLEcount:QUALifier?
Info
EQUalspecifies the qualifier as equal.LESSEQualspecifies the qualifier as less equal.MOREEQualspecifies the qualifier as more equal.UNEQualspecifies the qualifier as unequal.LESSthanspecifies the qualifier as less than.MOREthanspecifies the qualifier as more than.INrangespecifies the qualifier as in range.OUTrangespecifies the qualifier as out of range.
value
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:CYCLEcount:VALue command.
Description
- This command sets or queries the low value when searching on a FlexRay bus cycle count field. The search number is specified by x. The search condition must be set to CYCLEcount.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:CYCLEcount:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:CYCLEcount:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:CYCLEcount:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:CYCLEcount:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:CYCLEcount:VALue?
Info
<QString>specifies the cycle count value.
SearchSearchItemTriggerABusFlexrayCyclecountHivalue
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:CYCLEcount:HIVALue command.
Description
- This command sets or queries the heigh value when searching on a FlexRay bus cycle count field. The search number is specified by x. The search condition must be set to CYCLEcount.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:CYCLEcount:HIVALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:CYCLEcount:HIVALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:CYCLEcount:HIVALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:CYCLEcount:HIVALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:CYCLEcount:HIVALue?
Info
<QString>specifies the cycle count value.
SearchSearchItemTriggerABusFlexrayCyclecountQualifier
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:CYCLEcount:QUALifier command.
Description
- This command sets or queries the qualifier to be used when searching on a FlexRay bus search cycle count field. The search number is specified by x. The search condition must be set to CYCLEcount.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:CYCLEcount:QUALifier?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:CYCLEcount:QUALifier?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:CYCLEcount:QUALifier valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:CYCLEcount:QUALifier {EQUal|LESSEQual|MOREEQual|UNEQual|LESSthan|MOREthan|INrange|OUTrange}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:CYCLEcount:QUALifier?
Info
EQUalspecifies the qualifier as equal.LESSEQualspecifies the qualifier as less equal.MOREEQualspecifies the qualifier as more equal.UNEQualspecifies the qualifier as unequal.LESSthanspecifies the qualifier as less than.MOREthanspecifies the qualifier as more than.INrangespecifies the qualifier as in range.OUTrangespecifies the qualifier as out of range.
SearchSearchItemTriggerABusFlexrayCyclecountValue
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:CYCLEcount:VALue command.
Description
- This command sets or queries the low value when searching on a FlexRay bus cycle count field. The search number is specified by x. The search condition must be set to CYCLEcount.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:CYCLEcount:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:CYCLEcount:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:CYCLEcount:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:CYCLEcount:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:CYCLEcount:VALue?
Info
<QString>specifies the cycle count value.
SearchSearchItemTriggerABusFlexrayData
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:DATa command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:DATa?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:DATa?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.hivalue: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:DATa:HIVALuecommand..offset: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:DATa:OFFSetcommand..qualifier: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:DATa:QUALifiercommand..size: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:DATa:SIZecommand..value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:DATa:VALuecommand.
hivalue
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:DATa:HIVALue command.
Description
- This command sets or queries the high value when searching on a FlexRay bus data field. The search number is specified by x. The search condition must be set to IDANDDATA OR DATA.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:DATa:HIVALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:DATa:HIVALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:DATa:HIVALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:DATa:HIVALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:DATa:HIVALue?
Info
<QString>specifies the data value.
offset
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:DATa:OFFSet command.
Description
- This command sets or queries the offset of the data string, in bytes, when searching on a FlexRay bus data field. The search number is specified by x. The search condition must be set to IDANDDATA OR DATA.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:DATa:OFFSet?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:DATa:OFFSet?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:DATa:OFFSet valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:DATa:OFFSet <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:DATa:OFFSet?
Info
<NR3>specifies the data offset in bytes. A setting of X/Don’t care is accomplished by setting the offset to -1.
qualifier
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:DATa:QUALifier command.
Description
- This command sets or queries the qualifier to be used when searching on a FlexRay bus signal. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:DATa:QUALifier?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:DATa:QUALifier?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:DATa:QUALifier valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:DATa:QUALifier {EQUal|LESSEQual|MOREEQual|UNEQual|LESSthan|MOREthan|INrange|OUTrange}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:DATa:QUALifier?
Info
EQUalspecifies the qualifier as equal.LESSEQualspecifies the qualifier as less equal.MOREEQualspecifies the qualifier as more equal.UNEQualspecifies the qualifier as unequal.LESSthanspecifies the qualifier as less than.MOREthanspecifies the qualifier as more than.INrangespecifies the qualifier as in range.OUTrangespecifies the qualifier as out of range.
size
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:DATa:SIZe command.
Description
- This command sets or queries the length of the data string, in bytes, to be used when searching on a FlexRay bus data field. The search number is specified by x. The search condition must be set to IDANDDATA OR DATA.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:DATa:SIZe?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:DATa:SIZe?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:DATa:SIZe valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:DATa:SIZe <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:DATa:SIZe?
Info
<NR1>specifies the data size in bytes. A data size of -1 is don’t care.
value
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:DATa:VALue command.
Description
- This command sets or queries the low value to be used when searching on a FlexRay bus data field. The search number is specified by x. The search condition must be set to IDANDDATA or DATA.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:DATa:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:DATa:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:DATa:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:DATa:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:DATa:VALue?
Info
<QString>specifies the data value.
SearchSearchItemTriggerABusFlexrayDataHivalue
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:DATa:HIVALue command.
Description
- This command sets or queries the high value when searching on a FlexRay bus data field. The search number is specified by x. The search condition must be set to IDANDDATA OR DATA.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:DATa:HIVALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:DATa:HIVALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:DATa:HIVALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:DATa:HIVALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:DATa:HIVALue?
Info
<QString>specifies the data value.
SearchSearchItemTriggerABusFlexrayDataOffset
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:DATa:OFFSet command.
Description
- This command sets or queries the offset of the data string, in bytes, when searching on a FlexRay bus data field. The search number is specified by x. The search condition must be set to IDANDDATA OR DATA.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:DATa:OFFSet?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:DATa:OFFSet?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:DATa:OFFSet valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:DATa:OFFSet <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:DATa:OFFSet?
Info
<NR3>specifies the data offset in bytes. A setting of X/Don’t care is accomplished by setting the offset to -1.
SearchSearchItemTriggerABusFlexrayDataQualifier
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:DATa:QUALifier command.
Description
- This command sets or queries the qualifier to be used when searching on a FlexRay bus signal. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:DATa:QUALifier?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:DATa:QUALifier?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:DATa:QUALifier valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:DATa:QUALifier {EQUal|LESSEQual|MOREEQual|UNEQual|LESSthan|MOREthan|INrange|OUTrange}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:DATa:QUALifier?
Info
EQUalspecifies the qualifier as equal.LESSEQualspecifies the qualifier as less equal.MOREEQualspecifies the qualifier as more equal.UNEQualspecifies the qualifier as unequal.LESSthanspecifies the qualifier as less than.MOREthanspecifies the qualifier as more than.INrangespecifies the qualifier as in range.OUTrangespecifies the qualifier as out of range.
SearchSearchItemTriggerABusFlexrayDataSize
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:DATa:SIZe command.
Description
- This command sets or queries the length of the data string, in bytes, to be used when searching on a FlexRay bus data field. The search number is specified by x. The search condition must be set to IDANDDATA OR DATA.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:DATa:SIZe?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:DATa:SIZe?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:DATa:SIZe valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:DATa:SIZe <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:DATa:SIZe?
Info
<NR1>specifies the data size in bytes. A data size of -1 is don’t care.
SearchSearchItemTriggerABusFlexrayDataValue
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:DATa:VALue command.
Description
- This command sets or queries the low value to be used when searching on a FlexRay bus data field. The search number is specified by x. The search condition must be set to IDANDDATA or DATA.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:DATa:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:DATa:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:DATa:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:DATa:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:DATa:VALue?
Info
<QString>specifies the data value.
SearchSearchItemTriggerABusFlexrayEoftype
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:EOFTYPE command.
Description
- This command sets or queries the end of frame type when searching on a FlexRay bus signal. The search number is specified by x. The search condition must be set to EOF.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:EOFTYPE?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:EOFTYPE?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:EOFTYPE valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:EOFTYPE {ANY|STATIC|DYNAMIC}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:EOFTYPE?
Info
ANYspecifies either end of file type.STATICspecifies the static end of file type.DYNAMICspecifies the static end of file type.
SearchSearchItemTriggerABusFlexrayErrtype
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:ERRTYPE command.
Description
- This command sets or queries the error type when searching on a FlexRay bus signal. The search number is specified by x. The search condition must be set to ERROR.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:ERRTYPE?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:ERRTYPE?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:ERRTYPE valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:ERRTYPE {CRCHeader|CRCTrailer|NULLFRStatic|NULLFRDynamic|SYNCFrame|STARTupnosync}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:ERRTYPE?
Info
CRCHeadersets the error type to CRCHeader.CRCTrailersets the error type to CRCTrailer.NULLFRStaticsets the error type to NULLFRStatic.NULLFRDynamicsets the error type to NULLFRDynamic.SYNCFramesets the error type to SYNCFrame.STARTupnosyncsets the error type to STARTupnosync.
SearchSearchItemTriggerABusFlexrayFrameid
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:FRAMEID command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:FRAMEID?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:FRAMEID?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.hivalue: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:FRAMEID:HIVALuecommand..qualifier: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:FRAMEID:QUALifiercommand..value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:FRAMEID:VALuecommand.
hivalue
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:FRAMEID:HIVALue command.
Description
- This command sets or queries the high value when searching on a FlexRay bus frame id field. The search condition must be set to IDentifier. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:FRAMEID:HIVALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:FRAMEID:HIVALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:FRAMEID:HIVALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:FRAMEID:HIVALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:FRAMEID:HIVALue?
Info
<QString>is the frame id high value.
qualifier
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:FRAMEID:QUALifier command.
Description
- This command sets the qualifier to be used when searching on a FlexRay bus signal. The search condition must be set to Identifier. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:FRAMEID:QUALifier?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:FRAMEID:QUALifier?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:FRAMEID:QUALifier valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:FRAMEID:QUALifier {EQual|UNEQual|LESSthan|MOREthan|LESSEQual|MOREEQual|INrange|OUTrange}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:FRAMEID:QUALifier?
Info
EQualsets the qualifier to equal.UNEQualsets the qualifier to unequal.LESSthansets the qualifier to less than.MOREthansets the qualifier to more than.LESSEQualsets the qualifier to less equal.MOREEQualsets the qualifier to more equal.INrangesets the qualifier to in range.OUTrangesets the qualifier to out of range.
value
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:FRAMEID:VALue command.
Description
- This command sets the low value when searching on a FlexRay bus id field. The search condition must be set to IDentifier. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:FRAMEID:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:FRAMEID:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:FRAMEID:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:FRAMEID:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:FRAMEID:VALue?
Info
<QString>is the frame id value.
SearchSearchItemTriggerABusFlexrayFrameidHivalue
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:FRAMEID:HIVALue command.
Description
- This command sets or queries the high value when searching on a FlexRay bus frame id field. The search condition must be set to IDentifier. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:FRAMEID:HIVALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:FRAMEID:HIVALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:FRAMEID:HIVALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:FRAMEID:HIVALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:FRAMEID:HIVALue?
Info
<QString>is the frame id high value.
SearchSearchItemTriggerABusFlexrayFrameidQualifier
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:FRAMEID:QUALifier command.
Description
- This command sets the qualifier to be used when searching on a FlexRay bus signal. The search condition must be set to Identifier. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:FRAMEID:QUALifier?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:FRAMEID:QUALifier?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:FRAMEID:QUALifier valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:FRAMEID:QUALifier {EQual|UNEQual|LESSthan|MOREthan|LESSEQual|MOREEQual|INrange|OUTrange}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:FRAMEID:QUALifier?
Info
EQualsets the qualifier to equal.UNEQualsets the qualifier to unequal.LESSthansets the qualifier to less than.MOREthansets the qualifier to more than.LESSEQualsets the qualifier to less equal.MOREEQualsets the qualifier to more equal.INrangesets the qualifier to in range.OUTrangesets the qualifier to out of range.
SearchSearchItemTriggerABusFlexrayFrameidValue
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:FRAMEID:VALue command.
Description
- This command sets the low value when searching on a FlexRay bus id field. The search condition must be set to IDentifier. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:FRAMEID:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:FRAMEID:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:FRAMEID:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:FRAMEID:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:FRAMEID:VALue?
Info
<QString>is the frame id value.
SearchSearchItemTriggerABusFlexrayFrametype
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:FRAMEType command.
Description
- This command sets or queries the FLEXRAY bus search trigger frame type. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:FRAMEType?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:FRAMEType?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:FRAMEType valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:FRAMEType {NORMal|PAYload|NULL|SYNC|STARTup}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:FRAMEType?
Info
NORMalsets the frame type to normal.PAYloadsets the frame type to payload.NULLsets the frame type to null.SYNCsets the frame type to sync.STARTupsets the frame type to startup.
SearchSearchItemTriggerABusFlexrayHeader
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:HEADER command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:HEADER?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:HEADER?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.crc: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:HEADER:CRCcommand..cyclecount: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:HEADER:CYCLECountcommand..frameid: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:HEADER:FRAMEIDcommand..indbits: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:HEADER:INDBitscommand..paylength: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:HEADER:PAYLENgthcommand.
crc
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:HEADER:CRC command.
Description
- This command sets or queries the CRC portion of the binary header string whensearching on a FlexRay bus header. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:HEADER:CRC?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:HEADER:CRC?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:HEADER:CRC valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:HEADER:CRC <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:HEADER:CRC?
Info
<QString>specifies the CRC.
cyclecount
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:HEADER:CYCLECount command.
Description
- This command sets or queries the cycle count portion of the binary header string when searching on a FlexRay bus header. The search number is specified by x. The search condition must be set to HEADer.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:HEADER:CYCLECount?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:HEADER:CYCLECount?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:HEADER:CYCLECount valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:HEADER:CYCLECount <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:HEADER:CYCLECount?
Info
<QString>specifies the header cycle count.
frameid
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:HEADER:FRAMEID command.
Description
- This command sets or queries the frame id portion of the binary header string when searching on a FlexRay bus header. The search number is specified by x. The search condition must be set to HEADer or IDANDDATA.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:HEADER:FRAMEID?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:HEADER:FRAMEID?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:HEADER:FRAMEID valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:HEADER:FRAMEID <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:HEADER:FRAMEID?
Info
<QString>specifies the frame ID.
indbits
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:HEADER:INDBits command.
Description
- This command sets or queries the Indicator bits portion of the binary header string when searching on a FlexRay bus header. The search number is specified by x. The search condition must be set to HEADer.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:HEADER:INDBits?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:HEADER:INDBits?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:HEADER:INDBits valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:HEADER:INDBits <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:HEADER:INDBits?
Info
<QString>specifies the header Indicator Bits.
paylength
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:HEADER:PAYLENgth command.
Description
- This command sets or queries the payload length portion of the binary header string when searching on a FlexRay bus search trigger header. The search number is specified by x. The search condition must be set to HEADer.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:HEADER:PAYLENgth?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:HEADER:PAYLENgth?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:HEADER:PAYLENgth valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:HEADER:PAYLENgth <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:HEADER:PAYLENgth?
Info
<QString>specifies the header Payload Length.
SearchSearchItemTriggerABusFlexrayHeaderCrc
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:HEADER:CRC command.
Description
- This command sets or queries the CRC portion of the binary header string whensearching on a FlexRay bus header. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:HEADER:CRC?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:HEADER:CRC?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:HEADER:CRC valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:HEADER:CRC <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:HEADER:CRC?
Info
<QString>specifies the CRC.
SearchSearchItemTriggerABusFlexrayHeaderCyclecount
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:HEADER:CYCLECount command.
Description
- This command sets or queries the cycle count portion of the binary header string when searching on a FlexRay bus header. The search number is specified by x. The search condition must be set to HEADer.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:HEADER:CYCLECount?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:HEADER:CYCLECount?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:HEADER:CYCLECount valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:HEADER:CYCLECount <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:HEADER:CYCLECount?
Info
<QString>specifies the header cycle count.
SearchSearchItemTriggerABusFlexrayHeaderFrameid
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:HEADER:FRAMEID command.
Description
- This command sets or queries the frame id portion of the binary header string when searching on a FlexRay bus header. The search number is specified by x. The search condition must be set to HEADer or IDANDDATA.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:HEADER:FRAMEID?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:HEADER:FRAMEID?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:HEADER:FRAMEID valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:HEADER:FRAMEID <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:HEADER:FRAMEID?
Info
<QString>specifies the frame ID.
SearchSearchItemTriggerABusFlexrayHeaderIndbits
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:HEADER:INDBits command.
Description
- This command sets or queries the Indicator bits portion of the binary header string when searching on a FlexRay bus header. The search number is specified by x. The search condition must be set to HEADer.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:HEADER:INDBits?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:HEADER:INDBits?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:HEADER:INDBits valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:HEADER:INDBits <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:HEADER:INDBits?
Info
<QString>specifies the header Indicator Bits.
SearchSearchItemTriggerABusFlexrayHeaderPaylength
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:HEADER:PAYLENgth command.
Description
- This command sets or queries the payload length portion of the binary header string when searching on a FlexRay bus search trigger header. The search number is specified by x. The search condition must be set to HEADer.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:HEADER:PAYLENgth?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:HEADER:PAYLENgth?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:HEADER:PAYLENgth valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:HEADER:PAYLENgth <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:HEADER:PAYLENgth?
Info
<QString>specifies the header Payload Length.
SearchSearchItemTriggerABusI2c
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I2C?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I2C?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.address: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:ADDResscommand tree..condition: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:CONDitioncommand..data: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:DATacommand tree.
address
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:ADDRess command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:ADDRess?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:ADDRess?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.mode: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:ADDRess:MODecommand..value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:ADDRess:VALuecommand.
condition
property
¶
condition: SearchSearchItemTriggerABusI2cCondition
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:CONDition command.
Description
- This command sets or queries the search condition for an I2C bus. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:CONDition?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:CONDition?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:CONDition valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:CONDition {ADDRess|ADDRANDDATA|DATa|ACKMISS|REPEATstart|STARt|STOP}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:CONDition?
Info
ADDressspecifies the trigger condition as Address.ADDRANDDATAspecifies the trigger condition as Address and Data.DATaspecifies the trigger condition as Data.ACKMISSspecifies the trigger condition as Missing of Acknowledgement.REPEATstartspecifies the trigger condition as Repeat of Start.STARtspecifies the trigger condition as Start.STOPspecifies the trigger condition as Stop.
data
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:DATa command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:DATa?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:DATa?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.direction: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:DATa:DIRectioncommand..size: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:DATa:SIZecommand..value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:DATa:VALuecommand.
SearchSearchItemTriggerABusI2cAddress
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:ADDRess command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:ADDRess?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:ADDRess?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.mode: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:ADDRess:MODecommand..value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:ADDRess:VALuecommand.
mode
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:ADDRess:MODe command.
Description
- This command sets or queries the I2C address mode for the specified bus search to determine where to place a mark. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:ADDRess:MODe?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:ADDRess:MODe?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:ADDRess:MODe valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:ADDRess:MODe {ADDR10|ADDR7}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:ADDRess:MODe?
Info
ADDR10specifies the address mode as ADDR10.ADDR7specifies the address mode as ADDR7.
value
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:ADDRess:VALue command.
Description
- This command sets or queries the binary address string used for the I2C search the specified search condition is Address or AddressData. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:ADDRess:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:ADDRess:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:ADDRess:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:ADDRess:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:ADDRess:VALue?
Info
<QString>specifies the address value. This is either a 7-bit or 10-bit value depending on the address mode. The valid characters are 0-9, A-F, and X for addresses in hexadecimal format; and 0, 1, and X otherwise.
SearchSearchItemTriggerABusI2cAddressMode
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:ADDRess:MODe command.
Description
- This command sets or queries the I2C address mode for the specified bus search to determine where to place a mark. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:ADDRess:MODe?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:ADDRess:MODe?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:ADDRess:MODe valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:ADDRess:MODe {ADDR10|ADDR7}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:ADDRess:MODe?
Info
ADDR10specifies the address mode as ADDR10.ADDR7specifies the address mode as ADDR7.
SearchSearchItemTriggerABusI2cAddressValue
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:ADDRess:VALue command.
Description
- This command sets or queries the binary address string used for the I2C search the specified search condition is Address or AddressData. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:ADDRess:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:ADDRess:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:ADDRess:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:ADDRess:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:ADDRess:VALue?
Info
<QString>specifies the address value. This is either a 7-bit or 10-bit value depending on the address mode. The valid characters are 0-9, A-F, and X for addresses in hexadecimal format; and 0, 1, and X otherwise.
SearchSearchItemTriggerABusI2cCondition
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:CONDition command.
Description
- This command sets or queries the search condition for an I2C bus. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:CONDition?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:CONDition?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:CONDition valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:CONDition {ADDRess|ADDRANDDATA|DATa|ACKMISS|REPEATstart|STARt|STOP}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:CONDition?
Info
ADDressspecifies the trigger condition as Address.ADDRANDDATAspecifies the trigger condition as Address and Data.DATaspecifies the trigger condition as Data.ACKMISSspecifies the trigger condition as Missing of Acknowledgement.REPEATstartspecifies the trigger condition as Repeat of Start.STARtspecifies the trigger condition as Start.STOPspecifies the trigger condition as Stop.
SearchSearchItemTriggerABusI2cData
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:DATa command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:DATa?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:DATa?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.direction: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:DATa:DIRectioncommand..size: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:DATa:SIZecommand..value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:DATa:VALuecommand.
direction
property
¶
direction: SearchSearchItemTriggerABusI2cDataDirection
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:DATa:DIRection command.
Description
- This command sets or queries the direction of the data for the I2C bus search to determine where to place a mark. The search number is specified by x. Read or write is indicated by the R/W bit in the I2C protocol.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:DATa:DIRection?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:DATa:DIRection?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:DATa:DIRection valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:DATa:DIRection {NOCARE|READ|WRITE}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:DATa:DIRection?
Info
NOCAREspecifies the direction of data as Don’t Care.READspecifies the direction of data as Read.WRITEspecifies the direction of data as Write.
size
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:DATa:SIZe command.
Description
- This command sets or queries the length of the data string in bytes used for an I2C bus search to determine where to place a mark. The search number is specified by x. The search condition must be DATA or ADDRANDDATA.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:DATa:SIZe?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:DATa:SIZe?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:DATa:SIZe valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:DATa:SIZe <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:DATa:SIZe?
Info
<NR1>specifies the data size in bytes.
value
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:DATa:VALue command.
Description
- This command sets or queries the binary data string used for I2C bus search to determine where to place a mark. The search number is specified by x. The search condition must be DATA or ADDRANDDATA.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:DATa:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:DATa:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:DATa:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:DATa:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:DATa:VALue?
Info
<QString>specifies the data value. The valid characters are 0, 1, or X for binary format; and A-F, 0-9, and X for hexadecimal format.
SearchSearchItemTriggerABusI2cDataDirection
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:DATa:DIRection command.
Description
- This command sets or queries the direction of the data for the I2C bus search to determine where to place a mark. The search number is specified by x. Read or write is indicated by the R/W bit in the I2C protocol.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:DATa:DIRection?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:DATa:DIRection?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:DATa:DIRection valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:DATa:DIRection {NOCARE|READ|WRITE}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:DATa:DIRection?
Info
NOCAREspecifies the direction of data as Don’t Care.READspecifies the direction of data as Read.WRITEspecifies the direction of data as Write.
SearchSearchItemTriggerABusI2cDataSize
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:DATa:SIZe command.
Description
- This command sets or queries the length of the data string in bytes used for an I2C bus search to determine where to place a mark. The search number is specified by x. The search condition must be DATA or ADDRANDDATA.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:DATa:SIZe?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:DATa:SIZe?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:DATa:SIZe valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:DATa:SIZe <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:DATa:SIZe?
Info
<NR1>specifies the data size in bytes.
SearchSearchItemTriggerABusI2cDataValue
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:DATa:VALue command.
Description
- This command sets or queries the binary data string used for I2C bus search to determine where to place a mark. The search number is specified by x. The search condition must be DATA or ADDRANDDATA.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:DATa:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:DATa:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:DATa:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:DATa:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:DATa:VALue?
Info
<QString>specifies the data value. The valid characters are 0, 1, or X for binary format; and A-F, 0-9, and X for hexadecimal format.
SearchSearchItemTriggerABusI3c
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.address: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:ADDResscommand tree..bcr: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:BCRcommand tree..bcrtype: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:BCRTypecommand tree..bpackets: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:BPACKetscommand..brgtid: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:BRGTIDcommand tree..ccode: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:CCODecommand tree..condition: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:CONDitioncommand..data: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:DATacommand tree..dcr: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:DCRcommand tree..dcrtype: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:DCRTypecommand tree..dword: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:DWORdcommand tree..errortype: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:ERRORTYPecommand..eventbyte: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:EVENTBYTecommand tree..freqbyte: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:FREQBYTecommand tree..gslsb: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:GSLSbcommand tree..gsmsb: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:GSMSbcommand tree..id: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:IDcommand tree..inaccbyte: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:INACCBYTecommand tree..maxread: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:MAXREADcommand tree..maxrturn: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:MAXRTURNcommand tree..maxwrite: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:MAXWRITecommand tree..packets: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:PACKetscommand..saddress: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:SADDresscommand tree..sdr: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:SDRcommand tree..statebyte: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:STATEBYTecommand tree..static: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:STATiccommand tree..supportbyte: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:SUPPORTBYTecommand tree..testmode: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:TESTMODecommand tree.
address
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:ADDRess command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:ADDRess?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:ADDRess?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.mode: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:ADDRess:MODecommand..value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:ADDRess:VALuecommand.
bcr
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:BCR command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:BCR?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:BCR?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:BCR:VALuecommand.
bcrtype
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:BCRType command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:BCRType?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:BCRType?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:BCRType:VALuecommand.
bpackets
property
¶
bpackets: SearchSearchItemTriggerABusI3cBpackets
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:BPACKets command.
Description
- This command sets or queries the I3C Broadcast Packets search to Broadcast or Response. Requires purchase and installation of option SRI3C.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:BPACKets?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:BPACKets?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:BPACKets valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:BPACKets {RESPonse|BROadcast}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:BPACKets?
Info
Search<x>specifies the search number.RESPonsespecifies the broadcast address mode as Response.BROadcastspecifies the broadcast address mode as Broadcast.
brgtid
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:BRGTID command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:BRGTID?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:BRGTID?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:BRGTID:VALuecommand.
ccode
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:CCODe command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:CCODe?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:CCODe?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:CCODe:VALuecommand.
condition
property
¶
condition: SearchSearchItemTriggerABusI3cCondition
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:CONDition command.
Description
- This command sets or queries the trigger condition for the specified I3C bus trigger search to determine where to place a mark. Requires purchase and installation of option SRI3C.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:CONDition?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:CONDition?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:CONDition valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:CONDition {STARt|REPEATStart|ADDRess|DATa|SDRDirect|SDRBroadcast|DDR|ERRors|HOTJoin|DMSGEnd|BMSGEnd|HDRRestart|HDRExit}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:CONDition?
Info
Search<x>specifies the search number.STARtspecifies trigger condition as Start.REPEATStartspecifies trigger condition as Repeated Start.ADDRessspecifies trigger condition as Address.DATaspecifies trigger condition as Data.SDRDirectspecifies trigger condition as I3C SDR Direct.SDRBroadcastspecifies trigger condition as I3C SDR Broadcast.DDRspecifies trigger condition as DDR.ERRorsspecifies trigger condition as Errors.HOTJoinspecifies trigger condition as Hot-Join.DMSGEndspecifies trigger condition as Direct Message End.BMSGEndspecifies trigger condition as Stop.HDRRestratspecifies trigger condition as HDR Restart.HDRExitspecifies trigger condition as HDR Exit.
data
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:DATa command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:DATa?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:DATa?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.direction: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:DATa:DIRectioncommand..size: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:DATa:SIZecommand..value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:DATa:VALuecommand.
dcr
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:DCR command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:DCR?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:DCR?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:DCR:VALuecommand.
dcrtype
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:DCRType command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:DCRType?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:DCRType?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:DCRType:VALuecommand.
dword
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:DWORd command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:DWORd?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:DWORd?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:DWORd:VALuecommand.
errortype
property
¶
errortype: SearchSearchItemTriggerABusI3cErrortype
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:ERRORTYPe command.
Description
- This command sets or queries the error type condition for the specified I3C bus search to determine where to place a mark. Requires purchase and installation of option SRI3C.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:ERRORTYPe?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:ERRORTYPe?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:ERRORTYPe valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:ERRORTYPe {NACK|TBIT|PARity|BADDr|DADDr|PREamble|CRC}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:ERRORTYPe?
Info
Search<x>specifies the search number.NACKspecifies the error type on which to search as Missing Ack.TBITspecifies the error type on which to search as T-Bit.PARityspecifies the error type on which to search as Parity.BADDrspecifies the error type on which to search as Broadcast Address.DADDrspecifies the error type on which to search as Dynamic Address.PREamblespecifies the error type on which to search as Preamble.CRCspecifies the error type on which to search as CRC.
eventbyte
property
¶
eventbyte: SearchSearchItemTriggerABusI3cEventbyte
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:EVENTBYTe command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:EVENTBYTe?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:EVENTBYTe?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:EVENTBYTe:VALuecommand.
freqbyte
property
¶
freqbyte: SearchSearchItemTriggerABusI3cFreqbyte
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:FREQBYTe command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:FREQBYTe?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:FREQBYTe?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:FREQBYTe:VALuecommand.
gslsb
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:GSLSb command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:GSLSb?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:GSLSb?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:GSLSb:VALuecommand.
gsmsb
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:GSMSb command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:GSMSb?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:GSMSb?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:GSMSb:VALuecommand.
id
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:ID command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:ID?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:ID?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:ID:VALuecommand.
inaccbyte
property
¶
inaccbyte: SearchSearchItemTriggerABusI3cInaccbyte
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:INACCBYTe command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:INACCBYTe?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:INACCBYTe?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:INACCBYTe:VALuecommand.
maxread
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:MAXREAD command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:MAXREAD?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:MAXREAD?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:MAXREAD:VALuecommand.
maxrturn
property
¶
maxrturn: SearchSearchItemTriggerABusI3cMaxrturn
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:MAXRTURN command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:MAXRTURN?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:MAXRTURN?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:MAXRTURN:VALuecommand.
maxwrite
property
¶
maxwrite: SearchSearchItemTriggerABusI3cMaxwrite
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:MAXWRITe command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:MAXWRITe?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:MAXWRITe?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:MAXWRITe:VALuecommand.
packets
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:PACKets command.
Description
- This command sets or queries the I3C Direct Packets to Direct or Response. Requires purchase and installation of option SRI3C.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:PACKets?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:PACKets?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:PACKets valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:PACKets {RESPonse|DIRect}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:PACKets?
Info
Search<x>specifies the search number.RESPonsespecifies the packet address mode as Response.DIRectspecifies the packet address mode as Direct.
saddress
property
¶
saddress: SearchSearchItemTriggerABusI3cSaddress
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:SADDress command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:SADDress?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:SADDress?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:SADDress:VALuecommand.
sdr
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:SDR command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:SDR?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:SDR?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.broadcastpacket: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:SDR:BROADCASTPacketcommand..directpacket: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:SDR:DIRECTPacketcommand.
statebyte
property
¶
statebyte: SearchSearchItemTriggerABusI3cStatebyte
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:STATEBYTe command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:STATEBYTe?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:STATEBYTe?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:STATEBYTe:VALuecommand.
static
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:STATic command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:STATic?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:STATic?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.address: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:STATic:ADDResscommand.
supportbyte
property
¶
supportbyte: SearchSearchItemTriggerABusI3cSupportbyte
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:SUPPORTBYTe command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:SUPPORTBYTe?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:SUPPORTBYTe?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:SUPPORTBYTe:VALuecommand.
testmode
property
¶
testmode: SearchSearchItemTriggerABusI3cTestmode
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:TESTMODe command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:TESTMODe?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:TESTMODe?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:TESTMODe:VALuecommand.
SearchSearchItemTriggerABusI3cAddress
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:ADDRess command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:ADDRess?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:ADDRess?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.mode: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:ADDRess:MODecommand..value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:ADDRess:VALuecommand.
mode
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:ADDRess:MODe command.
Description
- This command sets or queries the address mode for the specified I3C bus trigger search to determine where to place a search mark. Requires purchase and installation of option SRI3C.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:ADDRess:MODe?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:ADDRess:MODe?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:ADDRess:MODe valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:ADDRess:MODe {ADDR10|ADDR7}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:ADDRess:MODe?
Info
Search<x>specifies the search number.ADDR10specifies the address mode as ADDR10.ADDR7specifies the address mode as ADDR7.
value
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:ADDRess:VALue command.
Description
- This command sets or queries the I3C address value for which to search, to determine where to place a search mark. Requires purchase and installation of option SRI3C.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:ADDRess:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:ADDRess:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:ADDRess:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:ADDRess:VALue <Qstring>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:ADDRess:VALue?
Info
Search<x>specifies the search number.<Qstring>specifies the address value for the specified Search. This is either a 7-bit or 10-bit value depending on the address mode. The valid characters are 0-9, A-F, and X for Hexadecimal address format; and 0, 1, and X (don’t care) for Binary address format.
SearchSearchItemTriggerABusI3cAddressMode
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:ADDRess:MODe command.
Description
- This command sets or queries the address mode for the specified I3C bus trigger search to determine where to place a search mark. Requires purchase and installation of option SRI3C.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:ADDRess:MODe?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:ADDRess:MODe?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:ADDRess:MODe valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:ADDRess:MODe {ADDR10|ADDR7}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:ADDRess:MODe?
Info
Search<x>specifies the search number.ADDR10specifies the address mode as ADDR10.ADDR7specifies the address mode as ADDR7.
SearchSearchItemTriggerABusI3cAddressValue
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:ADDRess:VALue command.
Description
- This command sets or queries the I3C address value for which to search, to determine where to place a search mark. Requires purchase and installation of option SRI3C.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:ADDRess:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:ADDRess:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:ADDRess:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:ADDRess:VALue <Qstring>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:ADDRess:VALue?
Info
Search<x>specifies the search number.<Qstring>specifies the address value for the specified Search. This is either a 7-bit or 10-bit value depending on the address mode. The valid characters are 0-9, A-F, and X for Hexadecimal address format; and 0, 1, and X (don’t care) for Binary address format.
SearchSearchItemTriggerABusI3cBcr
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:BCR command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:BCR?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:BCR?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:BCR:VALuecommand.
value
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:BCR:VALue command.
Description
- This command sets or queries the binary field string used for the I3C search if the trigger condition is BCR. Requires purchase and installation of option SRI3C.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:BCR:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:BCR:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:BCR:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:BCR:VALue <Qstring>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:BCR:VALue?
Info
Search<x>specifies the search number.<Qstring>specifies the value for which to search. The valid characters are 0, 1, or X for Binary format; and 0-9, A-F, and X for Hexadecimal format.
SearchSearchItemTriggerABusI3cBcrValue
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:BCR:VALue command.
Description
- This command sets or queries the binary field string used for the I3C search if the trigger condition is BCR. Requires purchase and installation of option SRI3C.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:BCR:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:BCR:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:BCR:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:BCR:VALue <Qstring>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:BCR:VALue?
Info
Search<x>specifies the search number.<Qstring>specifies the value for which to search. The valid characters are 0, 1, or X for Binary format; and 0-9, A-F, and X for Hexadecimal format.
SearchSearchItemTriggerABusI3cBcrtype
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:BCRType command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:BCRType?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:BCRType?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:BCRType:VALuecommand.
value
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:BCRType:VALue command.
Description
- This command sets or queries the binary field string used for the I3C bus search if the trigger condition is BCRTYPE. Requires purchase and installation of option SRI3C.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:BCRType:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:BCRType:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:BCRType:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:BCRType:VALue <Qstring>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:BCRType:VALue?
Info
Search<x>specifies the search number.<Qstring>specifies the data value for which to search. The valid characters are 0, 1, or X for Binary format; and 0-9, A-F, and X for Hexadecimal format.
SearchSearchItemTriggerABusI3cBcrtypeValue
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:BCRType:VALue command.
Description
- This command sets or queries the binary field string used for the I3C bus search if the trigger condition is BCRTYPE. Requires purchase and installation of option SRI3C.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:BCRType:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:BCRType:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:BCRType:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:BCRType:VALue <Qstring>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:BCRType:VALue?
Info
Search<x>specifies the search number.<Qstring>specifies the data value for which to search. The valid characters are 0, 1, or X for Binary format; and 0-9, A-F, and X for Hexadecimal format.
SearchSearchItemTriggerABusI3cBpackets
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:BPACKets command.
Description
- This command sets or queries the I3C Broadcast Packets search to Broadcast or Response. Requires purchase and installation of option SRI3C.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:BPACKets?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:BPACKets?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:BPACKets valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:BPACKets {RESPonse|BROadcast}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:BPACKets?
Info
Search<x>specifies the search number.RESPonsespecifies the broadcast address mode as Response.BROadcastspecifies the broadcast address mode as Broadcast.
SearchSearchItemTriggerABusI3cBrgtid
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:BRGTID command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:BRGTID?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:BRGTID?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:BRGTID:VALuecommand.
value
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:BRGTID:VALue command.
Description
- This command sets or queries the binary field string used for the I3C trigger if the trigger condition is SETBRGTGT packet ID. Requires purchase and installation of option SRI3C.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:BRGTID:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:BRGTID:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:BRGTID:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:BRGTID:VALue <Qstring>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:BRGTID:VALue?
Info
Search<x>specifies the search number.<Qstring>specifies the value for which to search. The valid characters are 0, 1, or X for Binary format; and 0-9, A-F, and X for Hexadecimal format.
SearchSearchItemTriggerABusI3cBrgtidValue
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:BRGTID:VALue command.
Description
- This command sets or queries the binary field string used for the I3C trigger if the trigger condition is SETBRGTGT packet ID. Requires purchase and installation of option SRI3C.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:BRGTID:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:BRGTID:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:BRGTID:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:BRGTID:VALue <Qstring>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:BRGTID:VALue?
Info
Search<x>specifies the search number.<Qstring>specifies the value for which to search. The valid characters are 0, 1, or X for Binary format; and 0-9, A-F, and X for Hexadecimal format.
SearchSearchItemTriggerABusI3cCcode
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:CCODe command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:CCODe?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:CCODe?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:CCODe:VALuecommand.
value
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:CCODe:VALue command.
Description
- This command sets or queries the binary field string used for the I3C trigger if the trigger condition is SETBRGTGT packet ID. Requires purchase and installation of option SRI3C.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:CCODe:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:CCODe:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:CCODe:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:CCODe:VALue <Qstring>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:CCODe:VALue?
Info
Search<x>specifies the search number.<Qstring>specifies the value for which to search. The valid characters are 0, 1, or X for Binary format; and A-F, 0-9, and X for Hexadecimal format.
SearchSearchItemTriggerABusI3cCcodeValue
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:CCODe:VALue command.
Description
- This command sets or queries the binary field string used for the I3C trigger if the trigger condition is SETBRGTGT packet ID. Requires purchase and installation of option SRI3C.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:CCODe:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:CCODe:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:CCODe:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:CCODe:VALue <Qstring>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:CCODe:VALue?
Info
Search<x>specifies the search number.<Qstring>specifies the value for which to search. The valid characters are 0, 1, or X for Binary format; and A-F, 0-9, and X for Hexadecimal format.
SearchSearchItemTriggerABusI3cCondition
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:CONDition command.
Description
- This command sets or queries the trigger condition for the specified I3C bus trigger search to determine where to place a mark. Requires purchase and installation of option SRI3C.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:CONDition?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:CONDition?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:CONDition valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:CONDition {STARt|REPEATStart|ADDRess|DATa|SDRDirect|SDRBroadcast|DDR|ERRors|HOTJoin|DMSGEnd|BMSGEnd|HDRRestart|HDRExit}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:CONDition?
Info
Search<x>specifies the search number.STARtspecifies trigger condition as Start.REPEATStartspecifies trigger condition as Repeated Start.ADDRessspecifies trigger condition as Address.DATaspecifies trigger condition as Data.SDRDirectspecifies trigger condition as I3C SDR Direct.SDRBroadcastspecifies trigger condition as I3C SDR Broadcast.DDRspecifies trigger condition as DDR.ERRorsspecifies trigger condition as Errors.HOTJoinspecifies trigger condition as Hot-Join.DMSGEndspecifies trigger condition as Direct Message End.BMSGEndspecifies trigger condition as Stop.HDRRestratspecifies trigger condition as HDR Restart.HDRExitspecifies trigger condition as HDR Exit.
SearchSearchItemTriggerABusI3cData
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:DATa command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:DATa?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:DATa?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.direction: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:DATa:DIRectioncommand..size: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:DATa:SIZecommand..value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:DATa:VALuecommand.
direction
property
¶
direction: SearchSearchItemTriggerABusI3cDataDirection
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:DATa:DIRection command.
Description
- This command sets or queries the direction of the data for the I3C bus trigger search to determine where to place a mark. Requires purchase and installation of option SRI3C.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:DATa:DIRection?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:DATa:DIRection?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:DATa:DIRection valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:DATa:DIRection {NOCARE|READ|WRITE}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:DATa:DIRection?
Info
Search<x>specifies the search number.NOCAREspecifies the data direction for which to search is Don’t Care.READspecifies the data direction for which to search is Read.WRITEspecifies the data direction for which to search is Write.
size
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:DATa:SIZe command.
Description
- This command sets or queries the length of the data string in bytes used for the specified I3C bus trigger search to determine where to place a mark. Requires purchase and installation of option SRI3C.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:DATa:SIZe?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:DATa:SIZe?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:DATa:SIZe valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:DATa:SIZe <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:DATa:SIZe?
Info
Search<x>specifies the search number.<NR1>specifies the data size in bytes.
value
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:DATa:VALue command.
Description
- This command sets or queries the data value of the data token for the specified I3C bus trigger search to determine where to place a mark. Requires purchase and installation of option SRI3C.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:DATa:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:DATa:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:DATa:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:DATa:VALue <Qstring>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:DATa:VALue?
Info
Search<x>specifies the search number.<Qstring>specifies the data value. The valid characters are 0, 1, or X for Binary format; and A-F, 0-9, and X for Hexadecimal format.
SearchSearchItemTriggerABusI3cDataDirection
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:DATa:DIRection command.
Description
- This command sets or queries the direction of the data for the I3C bus trigger search to determine where to place a mark. Requires purchase and installation of option SRI3C.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:DATa:DIRection?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:DATa:DIRection?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:DATa:DIRection valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:DATa:DIRection {NOCARE|READ|WRITE}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:DATa:DIRection?
Info
Search<x>specifies the search number.NOCAREspecifies the data direction for which to search is Don’t Care.READspecifies the data direction for which to search is Read.WRITEspecifies the data direction for which to search is Write.
SearchSearchItemTriggerABusI3cDataSize
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:DATa:SIZe command.
Description
- This command sets or queries the length of the data string in bytes used for the specified I3C bus trigger search to determine where to place a mark. Requires purchase and installation of option SRI3C.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:DATa:SIZe?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:DATa:SIZe?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:DATa:SIZe valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:DATa:SIZe <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:DATa:SIZe?
Info
Search<x>specifies the search number.<NR1>specifies the data size in bytes.
SearchSearchItemTriggerABusI3cDataValue
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:DATa:VALue command.
Description
- This command sets or queries the data value of the data token for the specified I3C bus trigger search to determine where to place a mark. Requires purchase and installation of option SRI3C.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:DATa:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:DATa:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:DATa:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:DATa:VALue <Qstring>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:DATa:VALue?
Info
Search<x>specifies the search number.<Qstring>specifies the data value. The valid characters are 0, 1, or X for Binary format; and A-F, 0-9, and X for Hexadecimal format.
SearchSearchItemTriggerABusI3cDcr
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:DCR command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:DCR?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:DCR?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:DCR:VALuecommand.
value
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:DCR:VALue command.
Description
- This command sets or queries the binary field string used for the I3C bus search if the trigger condition is DCR. Requires purchase and installation of option SRI3C.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:DCR:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:DCR:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:DCR:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:DCR:VALue <Qstring>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:DCR:VALue?
Info
Search<x>specifies the search number.<Qstring>specifies the value for which to search. The valid characters are 0, 1, or X for Binary format; and 0-9, A-F, and X for Hexadecimal format.
SearchSearchItemTriggerABusI3cDcrValue
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:DCR:VALue command.
Description
- This command sets or queries the binary field string used for the I3C bus search if the trigger condition is DCR. Requires purchase and installation of option SRI3C.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:DCR:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:DCR:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:DCR:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:DCR:VALue <Qstring>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:DCR:VALue?
Info
Search<x>specifies the search number.<Qstring>specifies the value for which to search. The valid characters are 0, 1, or X for Binary format; and 0-9, A-F, and X for Hexadecimal format.
SearchSearchItemTriggerABusI3cDcrtype
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:DCRType command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:DCRType?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:DCRType?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:DCRType:VALuecommand.
value
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:DCRType:VALue command.
Description
- This command sets or queries the binary field string used for the I3C bus search if the trigger condition is DCRTYPE. Requires purchase and installation of option SRI3C.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:DCRType:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:DCRType:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:DCRType:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:DCRType:VALue <Qstring>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:DCRType:VALue?
Info
Search<x>specifies the search number.<Qstring>specifies the data value for which to search. The valid characters are 0, 1, or X for Binary format; and 0-9, A-F, and X for Hexadecimal format.
SearchSearchItemTriggerABusI3cDcrtypeValue
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:DCRType:VALue command.
Description
- This command sets or queries the binary field string used for the I3C bus search if the trigger condition is DCRTYPE. Requires purchase and installation of option SRI3C.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:DCRType:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:DCRType:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:DCRType:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:DCRType:VALue <Qstring>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:DCRType:VALue?
Info
Search<x>specifies the search number.<Qstring>specifies the data value for which to search. The valid characters are 0, 1, or X for Binary format; and 0-9, A-F, and X for Hexadecimal format.
SearchSearchItemTriggerABusI3cDword
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:DWORd command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:DWORd?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:DWORd?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:DWORd:VALuecommand.
value
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:DWORd:VALue command.
Description
- This command sets or queries the binary field string used for the I3C trigger if the trigger condition is DATAWORDS. Requires purchase and installation of option SRI3C.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:DWORd:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:DWORd:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:DWORd:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:DWORd:VALue <Qstring>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:DWORd:VALue?
Info
Search<x>specifies the search number.<Qstring>specifies the value for which to search. The valid characters are 0, 1, or X for Binary format; and 0-9, A-F, and X for Hexadecimal format.
SearchSearchItemTriggerABusI3cDwordValue
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:DWORd:VALue command.
Description
- This command sets or queries the binary field string used for the I3C trigger if the trigger condition is DATAWORDS. Requires purchase and installation of option SRI3C.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:DWORd:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:DWORd:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:DWORd:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:DWORd:VALue <Qstring>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:DWORd:VALue?
Info
Search<x>specifies the search number.<Qstring>specifies the value for which to search. The valid characters are 0, 1, or X for Binary format; and 0-9, A-F, and X for Hexadecimal format.
SearchSearchItemTriggerABusI3cErrortype
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:ERRORTYPe command.
Description
- This command sets or queries the error type condition for the specified I3C bus search to determine where to place a mark. Requires purchase and installation of option SRI3C.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:ERRORTYPe?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:ERRORTYPe?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:ERRORTYPe valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:ERRORTYPe {NACK|TBIT|PARity|BADDr|DADDr|PREamble|CRC}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:ERRORTYPe?
Info
Search<x>specifies the search number.NACKspecifies the error type on which to search as Missing Ack.TBITspecifies the error type on which to search as T-Bit.PARityspecifies the error type on which to search as Parity.BADDrspecifies the error type on which to search as Broadcast Address.DADDrspecifies the error type on which to search as Dynamic Address.PREamblespecifies the error type on which to search as Preamble.CRCspecifies the error type on which to search as CRC.
SearchSearchItemTriggerABusI3cEventbyte
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:EVENTBYTe command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:EVENTBYTe?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:EVENTBYTe?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:EVENTBYTe:VALuecommand.
value
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:EVENTBYTe:VALue command.
Description
- This command sets or queries the binary field string used for the I3C trigger if the trigger condition is EVENTBYTE. Requires purchase and installation of option SRI3C.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:EVENTBYTe:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:EVENTBYTe:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:EVENTBYTe:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:EVENTBYTe:VALue <Qstring>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:EVENTBYTe:VALue?
Info
Search<x>specifies the search number.<Qstring>specifies the value for which to search. The valid characters are 0, 1, or X for Binary format; and 0-9, A-F, and X for Hexadecimal format.
SearchSearchItemTriggerABusI3cEventbyteValue
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:EVENTBYTe:VALue command.
Description
- This command sets or queries the binary field string used for the I3C trigger if the trigger condition is EVENTBYTE. Requires purchase and installation of option SRI3C.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:EVENTBYTe:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:EVENTBYTe:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:EVENTBYTe:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:EVENTBYTe:VALue <Qstring>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:EVENTBYTe:VALue?
Info
Search<x>specifies the search number.<Qstring>specifies the value for which to search. The valid characters are 0, 1, or X for Binary format; and 0-9, A-F, and X for Hexadecimal format.
SearchSearchItemTriggerABusI3cFreqbyte
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:FREQBYTe command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:FREQBYTe?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:FREQBYTe?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:FREQBYTe:VALuecommand.
value
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:FREQBYTe:VALue command.
Description
- This command sets or queries the binary field string used for the I3C trigger if the trigger condition is FREQUENCYBYTE. Requires purchase and installation of option SRI3C.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:FREQBYTe:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:FREQBYTe:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:FREQBYTe:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:FREQBYTe:VALue <Qstring>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:FREQBYTe:VALue?
Info
Search<x>specifies the search number.<Qstring>specifies the value for which to search. The valid characters are 0, 1, or X for Binary format; and 0-9, A-F, and X for Hexadecimal format.
SearchSearchItemTriggerABusI3cFreqbyteValue
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:FREQBYTe:VALue command.
Description
- This command sets or queries the binary field string used for the I3C trigger if the trigger condition is FREQUENCYBYTE. Requires purchase and installation of option SRI3C.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:FREQBYTe:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:FREQBYTe:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:FREQBYTe:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:FREQBYTe:VALue <Qstring>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:FREQBYTe:VALue?
Info
Search<x>specifies the search number.<Qstring>specifies the value for which to search. The valid characters are 0, 1, or X for Binary format; and 0-9, A-F, and X for Hexadecimal format.
SearchSearchItemTriggerABusI3cGslsb
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:GSLSb command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:GSLSb?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:GSLSb?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:GSLSb:VALuecommand.
value
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:GSLSb:VALue command.
Description
- This command sets or queries the binary field string used for the I3C trigger if the trigger condition is GETSTATUSLSB. Requires purchase and installation of option SRI3C.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:GSLSb:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:GSLSb:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:GSLSb:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:GSLSb:VALue <Qstring>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:GSLSb:VALue?
Info
Search<x>specifies the search number.<Qstring>specifies the value for which to search. The valid characters are 0, 1, or X for Binary format; and 0-9, A-F, and X for Hexadecimal format.
SearchSearchItemTriggerABusI3cGslsbValue
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:GSLSb:VALue command.
Description
- This command sets or queries the binary field string used for the I3C trigger if the trigger condition is GETSTATUSLSB. Requires purchase and installation of option SRI3C.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:GSLSb:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:GSLSb:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:GSLSb:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:GSLSb:VALue <Qstring>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:GSLSb:VALue?
Info
Search<x>specifies the search number.<Qstring>specifies the value for which to search. The valid characters are 0, 1, or X for Binary format; and 0-9, A-F, and X for Hexadecimal format.
SearchSearchItemTriggerABusI3cGsmsb
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:GSMSb command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:GSMSb?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:GSMSb?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:GSMSb:VALuecommand.
value
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:GSMSb:VALue command.
Description
- This command sets or queries the binary field string used for the I3C trigger if the trigger condition is GETSTATUSMSB. Requires purchase and installation of option SRI3C.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:GSMSb:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:GSMSb:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:GSMSb:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:GSMSb:VALue <Qstring>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:GSMSb:VALue?
Info
Search<x>specifies the search number.<Qstring>specifies the value for which to search. The valid characters are 0, 1, or X for Binary format; and 0-9, A-F, and X for Hexadecimal format.
SearchSearchItemTriggerABusI3cGsmsbValue
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:GSMSb:VALue command.
Description
- This command sets or queries the binary field string used for the I3C trigger if the trigger condition is GETSTATUSMSB. Requires purchase and installation of option SRI3C.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:GSMSb:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:GSMSb:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:GSMSb:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:GSMSb:VALue <Qstring>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:GSMSb:VALue?
Info
Search<x>specifies the search number.<Qstring>specifies the value for which to search. The valid characters are 0, 1, or X for Binary format; and 0-9, A-F, and X for Hexadecimal format.
SearchSearchItemTriggerABusI3cId
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:ID command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:ID?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:ID?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:ID:VALuecommand.
value
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:ID:VALue command.
Description
- This command sets or queries the binary field string used for the I3C search if the trigger condition is ENTDAA packet ID. Requires purchase and installation of option SRI3C.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:ID:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:ID:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:ID:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:ID:VALue <Qstring>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:ID:VALue?
Info
Search<x>specifies the search number.<Qstring>specifies the value for which to search. The valid characters are 0, 1, or X for Binary format; and 0-9, A-F, and X for Hexadecimal format.
SearchSearchItemTriggerABusI3cIdValue
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:ID:VALue command.
Description
- This command sets or queries the binary field string used for the I3C search if the trigger condition is ENTDAA packet ID. Requires purchase and installation of option SRI3C.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:ID:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:ID:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:ID:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:ID:VALue <Qstring>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:ID:VALue?
Info
Search<x>specifies the search number.<Qstring>specifies the value for which to search. The valid characters are 0, 1, or X for Binary format; and 0-9, A-F, and X for Hexadecimal format.
SearchSearchItemTriggerABusI3cInaccbyte
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:INACCBYTe command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:INACCBYTe?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:INACCBYTe?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:INACCBYTe:VALuecommand.
value
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:INACCBYTe:VALue command.
Description
- This command sets or queries the binary field string used for the I3C search if the trigger condition is INACCURACYBYTE. Requires purchase and installation of option SRI3C.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:INACCBYTe:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:INACCBYTe:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:INACCBYTe:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:INACCBYTe:VALue <Qstring>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:INACCBYTe:VALue?
Info
Search<x>specifies the search number.<Qstring>specifies the value for which to search. The valid characters are 0, 1, or X for Binary format; and 0-9, A-F, and X for Hexadecimal format.
SearchSearchItemTriggerABusI3cInaccbyteValue
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:INACCBYTe:VALue command.
Description
- This command sets or queries the binary field string used for the I3C search if the trigger condition is INACCURACYBYTE. Requires purchase and installation of option SRI3C.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:INACCBYTe:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:INACCBYTe:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:INACCBYTe:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:INACCBYTe:VALue <Qstring>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:INACCBYTe:VALue?
Info
Search<x>specifies the search number.<Qstring>specifies the value for which to search. The valid characters are 0, 1, or X for Binary format; and 0-9, A-F, and X for Hexadecimal format.
SearchSearchItemTriggerABusI3cMaxread
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:MAXREAD command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:MAXREAD?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:MAXREAD?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:MAXREAD:VALuecommand.
value
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:MAXREAD:VALue command.
Description
- This command sets or queries the binary field string used for the I3C trigger if the trigger condition is MAXREAD. Requires purchase and installation of option SRI3C.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:MAXREAD:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:MAXREAD:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:MAXREAD:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:MAXREAD:VALue <Qstring>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:MAXREAD:VALue?
Info
Search<x>specifies the search number.<Qstring>specifies the value for which to search. The valid characters are 0, 1, or X for Binary format; and 0-9, A-F, and X for Hexadecimal format.
SearchSearchItemTriggerABusI3cMaxreadValue
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:MAXREAD:VALue command.
Description
- This command sets or queries the binary field string used for the I3C trigger if the trigger condition is MAXREAD. Requires purchase and installation of option SRI3C.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:MAXREAD:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:MAXREAD:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:MAXREAD:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:MAXREAD:VALue <Qstring>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:MAXREAD:VALue?
Info
Search<x>specifies the search number.<Qstring>specifies the value for which to search. The valid characters are 0, 1, or X for Binary format; and 0-9, A-F, and X for Hexadecimal format.
SearchSearchItemTriggerABusI3cMaxrturn
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:MAXRTURN command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:MAXRTURN?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:MAXRTURN?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:MAXRTURN:VALuecommand.
value
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:MAXRTURN:VALue command.
Description
- This command sets or queries the binary field string used for the I3C trigger if the trigger condition is MAXREADTURN. Requires purchase and installation of option SRI3C.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:MAXRTURN:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:MAXRTURN:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:MAXRTURN:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:MAXRTURN:VALue <Qstring>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:MAXRTURN:VALue?
Info
Search<x>specifies the search number.<Qstring>specifies the value for which to search. The valid characters are 0, 1, or X for Binary format; and 0-9, A-F, and X for Hexadecimal format.
SearchSearchItemTriggerABusI3cMaxrturnValue
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:MAXRTURN:VALue command.
Description
- This command sets or queries the binary field string used for the I3C trigger if the trigger condition is MAXREADTURN. Requires purchase and installation of option SRI3C.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:MAXRTURN:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:MAXRTURN:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:MAXRTURN:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:MAXRTURN:VALue <Qstring>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:MAXRTURN:VALue?
Info
Search<x>specifies the search number.<Qstring>specifies the value for which to search. The valid characters are 0, 1, or X for Binary format; and 0-9, A-F, and X for Hexadecimal format.
SearchSearchItemTriggerABusI3cMaxwrite
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:MAXWRITe command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:MAXWRITe?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:MAXWRITe?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:MAXWRITe:VALuecommand.
value
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:MAXWRITe:VALue command.
Description
- This command sets or queries the binary field string used for the I3C trigger if the trigger condition is MAXWRITE. Requires purchase and installation of option SRI3C.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:MAXWRITe:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:MAXWRITe:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:MAXWRITe:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:MAXWRITe:VALue <Qstring>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:MAXWRITe:VALue?
Info
Search<x>specifies the search number.<Qstring>specifies the value for which to search. The valid characters are 0, 1, or X for Binary format; and 0-9, A-F, and X for Hexadecimal format.
SearchSearchItemTriggerABusI3cMaxwriteValue
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:MAXWRITe:VALue command.
Description
- This command sets or queries the binary field string used for the I3C trigger if the trigger condition is MAXWRITE. Requires purchase and installation of option SRI3C.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:MAXWRITe:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:MAXWRITe:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:MAXWRITe:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:MAXWRITe:VALue <Qstring>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:MAXWRITe:VALue?
Info
Search<x>specifies the search number.<Qstring>specifies the value for which to search. The valid characters are 0, 1, or X for Binary format; and 0-9, A-F, and X for Hexadecimal format.
SearchSearchItemTriggerABusI3cPackets
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:PACKets command.
Description
- This command sets or queries the I3C Direct Packets to Direct or Response. Requires purchase and installation of option SRI3C.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:PACKets?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:PACKets?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:PACKets valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:PACKets {RESPonse|DIRect}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:PACKets?
Info
Search<x>specifies the search number.RESPonsespecifies the packet address mode as Response.DIRectspecifies the packet address mode as Direct.
SearchSearchItemTriggerABusI3cSaddress
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:SADDress command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:SADDress?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:SADDress?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:SADDress:VALuecommand.
value
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:SADDress:VALue command.
Description
- This command sets or queries the binary field string used for the I3C bus searchif the trigger condition is SLAVEADDRESS. Requires purchase and installation of option SRI3C.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:SADDress:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:SADDress:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:SADDress:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:SADDress:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:SADDress:VALue?
Info
Search<x>specifies the search number.<Qstring>specifies the address value for which to search. The valid characters are 0, 1, or X for Binary format; and A-F, 0-9, and X for Hexadecimal format.
SearchSearchItemTriggerABusI3cSaddressValue
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:SADDress:VALue command.
Description
- This command sets or queries the binary field string used for the I3C bus searchif the trigger condition is SLAVEADDRESS. Requires purchase and installation of option SRI3C.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:SADDress:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:SADDress:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:SADDress:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:SADDress:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:SADDress:VALue?
Info
Search<x>specifies the search number.<Qstring>specifies the address value for which to search. The valid characters are 0, 1, or X for Binary format; and A-F, 0-9, and X for Hexadecimal format.
SearchSearchItemTriggerABusI3cSdr
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:SDR command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:SDR?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:SDR?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.broadcastpacket: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:SDR:BROADCASTPacketcommand..directpacket: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:SDR:DIRECTPacketcommand.
broadcastpacket
property
¶
broadcastpacket: SearchSearchItemTriggerABusI3cSdrBroadcastpacket
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:SDR:BROADCASTPacket command.
Description
- This command sets or queries the SDR broadcast packets for the specified I3C bus trigger search to determine where to place a mark. Requires purchase and installation of option SRI3C.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:SDR:BROADCASTPacket?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:SDR:BROADCASTPacket?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:SDR:BROADCASTPacket valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:SDR:BROADCASTPacket {ENSLave|DISLave|ENTasx|RSTDya|ENTRDya|SETMwrl|SETMrdl|LSLave|ENTRTSTMode|EXTime>}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:SDR:BROADCASTPacket?
Info
Search<x>specifies the search number.ENSLavespecifies the I3C broadcast packet type as Enable Slave.DISLavespecifies the I3C broadcast packet type as Disable Slave.ENTasxspecifies the I3C broadcast packet type as Enter Activity Stat.RSTDyaspecifies the I3C broadcast packet type as Reset Dynamic Address.ENTRDyaspecifies the I3C broadcast packet type as Reset Dynamic Address.SETMwrlspecifies the I3C broadcast packet type as Set Max Write Length.SETMrdlspecifies the I3C broadcast packet type as Set Max Read Length.LSLavespecifies the I3C broadcast packet type as Define List of Slaves.ENTRTSTModespecifies the I3C broadcast packet type as Enter Test Mode Broadcast.EXTimespecifies the I3C broadcast packet type as Set Exchange Time.
directpacket
property
¶
directpacket: SearchSearchItemTriggerABusI3cSdrDirectpacket
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:SDR:DIRECTPacket command.
Description
- This command sets or queries the SDR direct packet types for the specified I3C bus trigger search to determine where to place a mark. Requires purchase and installation of option SRI3C.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:SDR:DIRECTPacket?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:SDR:DIRECTPacket?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:SDR:DIRECTPacket valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:SDR:DIRECTPacket {ENSLave|DISLave|ENTasx|RSTDya|SETMwrl|SETMrdl|SEText|SETDya|SETNdya|GETMWrl|GETMRdl|GETPrid|GETBusch|GETDevch|GETSlave|ACCM|SETBrt|MDATASpeed|HDRCapability}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:SDR:DIRECTPacket?
Info
Search<x>specifies the search number.ENSLavespecifies the trigger condition as Enable Slave.DISLavespecifies the trigger condition as Disable Slave.ENTasxspecifies the trigger condition as Enter Activity State.RSTDyaspecifies the trigger condition as Reset Dynamic Address.SETMwrlspecifies the trigger condition as Set Max Write Length.SETMrdlspecifies the trigger condition as Set Max Read Length.SETextspecifies the trigger condition as Set Exchange Time.SETDyaspecifies the trigger condition as Set Dynamic Address.SETNdyaspecifies the trigger condition as Set New Dynamic Address.GETMWrlspecifies the trigger condition as Get Max Write Length.GETMRdlspecifies the trigger condition as Get Max Read Length.GETPridspecifies the trigger condition as Get Provisional ID.GETBuschspecifies the trigger condition as Get Provisional ID.GETDevchspecifies the trigger condition as Get Dev Characteristics.GETSlavespecifies the trigger condition as Get Slave Current Status.ACCMspecifies the trigger condition as Get Accept Mastership.SETBrtspecifies the trigger condition as Set Bridge Direct Target.MDATASpeedspecifies the trigger condition as Get Max Data Speed.HDRCapabilityspecifies the trigger condition as Get HDR Capability.
SearchSearchItemTriggerABusI3cSdrBroadcastpacket
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:SDR:BROADCASTPacket command.
Description
- This command sets or queries the SDR broadcast packets for the specified I3C bus trigger search to determine where to place a mark. Requires purchase and installation of option SRI3C.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:SDR:BROADCASTPacket?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:SDR:BROADCASTPacket?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:SDR:BROADCASTPacket valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:SDR:BROADCASTPacket {ENSLave|DISLave|ENTasx|RSTDya|ENTRDya|SETMwrl|SETMrdl|LSLave|ENTRTSTMode|EXTime>}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:SDR:BROADCASTPacket?
Info
Search<x>specifies the search number.ENSLavespecifies the I3C broadcast packet type as Enable Slave.DISLavespecifies the I3C broadcast packet type as Disable Slave.ENTasxspecifies the I3C broadcast packet type as Enter Activity Stat.RSTDyaspecifies the I3C broadcast packet type as Reset Dynamic Address.ENTRDyaspecifies the I3C broadcast packet type as Reset Dynamic Address.SETMwrlspecifies the I3C broadcast packet type as Set Max Write Length.SETMrdlspecifies the I3C broadcast packet type as Set Max Read Length.LSLavespecifies the I3C broadcast packet type as Define List of Slaves.ENTRTSTModespecifies the I3C broadcast packet type as Enter Test Mode Broadcast.EXTimespecifies the I3C broadcast packet type as Set Exchange Time.
SearchSearchItemTriggerABusI3cSdrDirectpacket
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:SDR:DIRECTPacket command.
Description
- This command sets or queries the SDR direct packet types for the specified I3C bus trigger search to determine where to place a mark. Requires purchase and installation of option SRI3C.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:SDR:DIRECTPacket?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:SDR:DIRECTPacket?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:SDR:DIRECTPacket valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:SDR:DIRECTPacket {ENSLave|DISLave|ENTasx|RSTDya|SETMwrl|SETMrdl|SEText|SETDya|SETNdya|GETMWrl|GETMRdl|GETPrid|GETBusch|GETDevch|GETSlave|ACCM|SETBrt|MDATASpeed|HDRCapability}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:SDR:DIRECTPacket?
Info
Search<x>specifies the search number.ENSLavespecifies the trigger condition as Enable Slave.DISLavespecifies the trigger condition as Disable Slave.ENTasxspecifies the trigger condition as Enter Activity State.RSTDyaspecifies the trigger condition as Reset Dynamic Address.SETMwrlspecifies the trigger condition as Set Max Write Length.SETMrdlspecifies the trigger condition as Set Max Read Length.SETextspecifies the trigger condition as Set Exchange Time.SETDyaspecifies the trigger condition as Set Dynamic Address.SETNdyaspecifies the trigger condition as Set New Dynamic Address.GETMWrlspecifies the trigger condition as Get Max Write Length.GETMRdlspecifies the trigger condition as Get Max Read Length.GETPridspecifies the trigger condition as Get Provisional ID.GETBuschspecifies the trigger condition as Get Provisional ID.GETDevchspecifies the trigger condition as Get Dev Characteristics.GETSlavespecifies the trigger condition as Get Slave Current Status.ACCMspecifies the trigger condition as Get Accept Mastership.SETBrtspecifies the trigger condition as Set Bridge Direct Target.MDATASpeedspecifies the trigger condition as Get Max Data Speed.HDRCapabilityspecifies the trigger condition as Get HDR Capability.
SearchSearchItemTriggerABusI3cStatebyte
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:STATEBYTe command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:STATEBYTe?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:STATEBYTe?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:STATEBYTe:VALuecommand.
value
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:STATEBYTe:VALue command.
Description
- This command sets or queries the binary field string used for the I3C trigger if the trigger condition is STATEBYTE. Requires purchase and installation of option SRI3C.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:STATEBYTe:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:STATEBYTe:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:STATEBYTe:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:STATEBYTe:VALue <Qstring>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:STATEBYTe:VALue?
Info
Search<x>specifies the search number.<Qstring>specifies the value for which to search. The valid characters are 0, 1, or X for Binary format; and 0-9, A-F, and X for Hexadecimal format.
SearchSearchItemTriggerABusI3cStatebyteValue
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:STATEBYTe:VALue command.
Description
- This command sets or queries the binary field string used for the I3C trigger if the trigger condition is STATEBYTE. Requires purchase and installation of option SRI3C.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:STATEBYTe:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:STATEBYTe:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:STATEBYTe:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:STATEBYTe:VALue <Qstring>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:STATEBYTe:VALue?
Info
Search<x>specifies the search number.<Qstring>specifies the value for which to search. The valid characters are 0, 1, or X for Binary format; and 0-9, A-F, and X for Hexadecimal format.
SearchSearchItemTriggerABusI3cStatic
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:STATic command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:STATic?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:STATic?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.address: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:STATic:ADDResscommand.
address
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:STATic:ADDRess command.
Description
- This command sets or queries the binary field string used for the I3C search if the trigger condition is STATICADDRESS. Requires purchase and installation of option SRI3C.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:STATic:ADDRess?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:STATic:ADDRess?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:STATic:ADDRess valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:STATic:ADDRess <Qstring>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:STATic:ADDRess?
Info
Search<x>specifies the search number.<Qstring>specifies the address value for which to search. The valid characters are 0, 1, or X for Binary format; and 0-9, A-F, and X for Hexadecimal format.
SearchSearchItemTriggerABusI3cStaticAddress
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:STATic:ADDRess command.
Description
- This command sets or queries the binary field string used for the I3C search if the trigger condition is STATICADDRESS. Requires purchase and installation of option SRI3C.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:STATic:ADDRess?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:STATic:ADDRess?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:STATic:ADDRess valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:STATic:ADDRess <Qstring>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:STATic:ADDRess?
Info
Search<x>specifies the search number.<Qstring>specifies the address value for which to search. The valid characters are 0, 1, or X for Binary format; and 0-9, A-F, and X for Hexadecimal format.
SearchSearchItemTriggerABusI3cSupportbyte
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:SUPPORTBYTe command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:SUPPORTBYTe?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:SUPPORTBYTe?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:SUPPORTBYTe:VALuecommand.
value
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:SUPPORTBYTe:VALue command.
Description
- This command sets or queries the binary field string used for the I3C trigger if the trigger condition is SUPPORTEDBYTE. Requires purchase and installation of option SRI3C.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:SUPPORTBYTe:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:SUPPORTBYTe:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:SUPPORTBYTe:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:SUPPORTBYTe:VALue <Qstring>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:SUPPORTBYTe:VALue?
Info
Search<x>specifies the search number.<Qstring>specifies the value for which to search. The valid characters are 0, 1, or X for Binary format; and 0-9, A-F, and X for Hexadecimal format.
SearchSearchItemTriggerABusI3cSupportbyteValue
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:SUPPORTBYTe:VALue command.
Description
- This command sets or queries the binary field string used for the I3C trigger if the trigger condition is SUPPORTEDBYTE. Requires purchase and installation of option SRI3C.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:SUPPORTBYTe:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:SUPPORTBYTe:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:SUPPORTBYTe:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:SUPPORTBYTe:VALue <Qstring>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:SUPPORTBYTe:VALue?
Info
Search<x>specifies the search number.<Qstring>specifies the value for which to search. The valid characters are 0, 1, or X for Binary format; and 0-9, A-F, and X for Hexadecimal format.
SearchSearchItemTriggerABusI3cTestmode
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:TESTMODe command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:TESTMODe?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:TESTMODe?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:TESTMODe:VALuecommand.
value
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:TESTMODe:VALue command.
Description
- This command sets or queries the binary field string used for the I3C trigger if the trigger condition is TESTMODE. Requires purchase and installation of option SRI3C.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:TESTMODe:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:TESTMODe:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:TESTMODe:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:TESTMODe:VALue <Qstring>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:TESTMODe:VALue?
Info
Search<x>specifies the search number.<Qstring>specifies the value for which to search. The valid characters are 0, 1, or X for Binary format; and 0-9, A-F, and X for Hexadecimal format.
SearchSearchItemTriggerABusI3cTestmodeValue
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:TESTMODe:VALue command.
Description
- This command sets or queries the binary field string used for the I3C trigger if the trigger condition is TESTMODE. Requires purchase and installation of option SRI3C.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:TESTMODe:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:TESTMODe:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:TESTMODe:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:TESTMODe:VALue <Qstring>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I3C:TESTMODe:VALue?
Info
Search<x>specifies the search number.<Qstring>specifies the value for which to search. The valid characters are 0, 1, or X for Binary format; and 0-9, A-F, and X for Hexadecimal format.
SearchSearchItemTriggerABusLin
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:LIN?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:LIN?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.condition: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:CONDitioncommand..data: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATacommand tree..errtype: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:ERRTYPEcommand..identifier: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:IDentifiercommand tree.
condition
property
¶
condition: SearchSearchItemTriggerABusLinCondition
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:CONDition command.
Description
- This command sets or queries the condition for a LIN bus search. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:CONDition?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:CONDition?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:CONDition valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:CONDition {DATA|IDANDDATA|ERRor|IDentifier|SLEEP|SYNCfield|WAKEup}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:CONDition?
Info
DATAsets the trigger condition to data.IDANDDATAsets the trigger condition to ID and data.ERRorsets the trigger condition to error.IDentifiersets the trigger condition to identifier.SLEEPsets the trigger condition to sleep.SYNCfieldsets the trigger condition to sync field.WAKEupsets the trigger condition to wakeup.
data
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.hivalue: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa:HIVALuecommand..qualifier: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa:QUALifiercommand..size: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa:SIZecommand..value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa:VALuecommand.
errtype
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:ERRTYPE command.
Description
- This command sets or queries the error type for a LIN bus search. The search number is specified by x. The search condition must be set to ERROR.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:ERRTYPE?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:ERRTYPE?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:ERRTYPE valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:ERRTYPE {CHecksum|PARity|SYNC}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:ERRTYPE?
Info
CHecksumspecifies the error type is checksum.PARityspecifies the error type is parity.SYNCspecifies the error type is sync.
identifier
property
¶
identifier: SearchSearchItemTriggerABusLinIdentifier
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:IDentifier command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:IDentifier?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:IDentifier?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:IDentifier:VALuecommand.
SearchSearchItemTriggerABusLinCondition
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:CONDition command.
Description
- This command sets or queries the condition for a LIN bus search. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:CONDition?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:CONDition?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:CONDition valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:CONDition {DATA|IDANDDATA|ERRor|IDentifier|SLEEP|SYNCfield|WAKEup}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:CONDition?
Info
DATAsets the trigger condition to data.IDANDDATAsets the trigger condition to ID and data.ERRorsets the trigger condition to error.IDentifiersets the trigger condition to identifier.SLEEPsets the trigger condition to sleep.SYNCfieldsets the trigger condition to sync field.WAKEupsets the trigger condition to wakeup.
SearchSearchItemTriggerABusLinData
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.hivalue: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa:HIVALuecommand..qualifier: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa:QUALifiercommand..size: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa:SIZecommand..value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa:VALuecommand.
hivalue
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa:HIVALue command.
Description
- This command sets or queries the high data value string used in a LIN bus search. The search number is specified by x. The search condition must be DATA or IDANDDATA and the data qualifier must be INRANGE or OUTRANGE.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa:HIVALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa:HIVALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa:HIVALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa:HIVALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa:HIVALue?
Info
<QString>is a quoted string of 1s, 0s, or Xs representing the binary data string to be used in a LIN search if the search condition is IDentifier or IDANDDATA (identifier and data).
qualifier
property
¶
qualifier: SearchSearchItemTriggerABusLinDataQualifier
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa:QUALifier command.
Description
- This command sets or queries the data qualifier used in a LIN bus search. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa:QUALifier?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa:QUALifier?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa:QUALifier valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa:QUALifier {EQual|LESSEQual|MOREEQual|UNEQual|LESSthan|MOREthan|INrange|OUTrange}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa:QUALifier?
Info
EQualsets the data qualifier to equal.LESSEQualsets the data qualifier to less equal.MOREEQualsets the data qualifier to more equal.UNEQualsets the data qualifier to unequal.LESSthansets the data qualifier to less than.MOREthansets the data qualifier to more than.INrangesets the data qualifier to in range.OUTrangesets the data qualifier out of range.
size
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa:SIZe command.
Description
- This command sets or queries the length of the stat string in bytes used for a LIN bus search. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa:SIZe?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa:SIZe?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa:SIZe valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa:SIZe <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa:SIZe?
Info
<NR1>specifies the data size.
value
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa:VALue command.
Description
- This command sets or queries the data string used for a LIN bus search. The search number is specified by x. The search condition must be DATA or IDANDDATA.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa:VALue?
Info
<QString>specifies the data value.
SearchSearchItemTriggerABusLinDataHivalue
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa:HIVALue command.
Description
- This command sets or queries the high data value string used in a LIN bus search. The search number is specified by x. The search condition must be DATA or IDANDDATA and the data qualifier must be INRANGE or OUTRANGE.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa:HIVALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa:HIVALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa:HIVALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa:HIVALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa:HIVALue?
Info
<QString>is a quoted string of 1s, 0s, or Xs representing the binary data string to be used in a LIN search if the search condition is IDentifier or IDANDDATA (identifier and data).
SearchSearchItemTriggerABusLinDataQualifier
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa:QUALifier command.
Description
- This command sets or queries the data qualifier used in a LIN bus search. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa:QUALifier?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa:QUALifier?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa:QUALifier valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa:QUALifier {EQual|LESSEQual|MOREEQual|UNEQual|LESSthan|MOREthan|INrange|OUTrange}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa:QUALifier?
Info
EQualsets the data qualifier to equal.LESSEQualsets the data qualifier to less equal.MOREEQualsets the data qualifier to more equal.UNEQualsets the data qualifier to unequal.LESSthansets the data qualifier to less than.MOREthansets the data qualifier to more than.INrangesets the data qualifier to in range.OUTrangesets the data qualifier out of range.
SearchSearchItemTriggerABusLinDataSize
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa:SIZe command.
Description
- This command sets or queries the length of the stat string in bytes used for a LIN bus search. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa:SIZe?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa:SIZe?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa:SIZe valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa:SIZe <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa:SIZe?
Info
<NR1>specifies the data size.
SearchSearchItemTriggerABusLinDataValue
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa:VALue command.
Description
- This command sets or queries the data string used for a LIN bus search. The search number is specified by x. The search condition must be DATA or IDANDDATA.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa:VALue?
Info
<QString>specifies the data value.
SearchSearchItemTriggerABusLinErrtype
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:ERRTYPE command.
Description
- This command sets or queries the error type for a LIN bus search. The search number is specified by x. The search condition must be set to ERROR.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:ERRTYPE?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:ERRTYPE?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:ERRTYPE valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:ERRTYPE {CHecksum|PARity|SYNC}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:ERRTYPE?
Info
CHecksumspecifies the error type is checksum.PARityspecifies the error type is parity.SYNCspecifies the error type is sync.
SearchSearchItemTriggerABusLinIdentifier
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:IDentifier command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:IDentifier?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:IDentifier?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:IDentifier:VALuecommand.
value
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:IDentifier:VALue command.
Description
- This command sets or queries the string used for a LIN bus identifier value. The search number is specified by x. The search condition must be IDENTIFIER or IDANDDATA.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:IDentifier:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:IDentifier:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:IDentifier:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:IDentifier:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:IDentifier:VALue?
Info
<QString>specifies the identifier value.
SearchSearchItemTriggerABusLinIdentifierValue
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:IDentifier:VALue command.
Description
- This command sets or queries the string used for a LIN bus identifier value. The search number is specified by x. The search condition must be IDENTIFIER or IDANDDATA.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:IDentifier:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:IDentifier:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:IDentifier:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:IDentifier:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:IDentifier:VALue?
Info
<QString>specifies the identifier value.
SearchSearchItemTriggerABusManchester
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.condition: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:CONDitioncommand..data: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:DATacommand tree..error: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:ERRorcommand tree..header: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:HEADERcommand tree..sync: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:SYNCcommand tree..trailer: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:TRAILERcommand tree..packetoffdata: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:packetOffDatacommand tree.
condition
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:CONDition command.
Description
- This command specifies a field or condition for an Manchester bus to search on. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:CONDition?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:CONDition?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:CONDition valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:CONDition {SYNCBITS|HEADer|DATa|packetOffData|TRAiler|ERRors}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:CONDition?
Info
SYNCBITSspecifies Sync Bits symbols as the field within an Manchester frame to search on.HEADerspecifies header symbols as the field within an Manchester frame to search on.DATaspecifies data symbols as the field within an Manchester frame to search on.packetOffDataspecifies the binary string used for Manchester triggering if the trigger condition is DATA.TRAilerspecifies trailer symbols as the field within an Manchester frame to search on.ERRorsspecifies error symbols as the field within an Manchester frame to search on.
data
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:DATa command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:DATa?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:DATa?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.size: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:DATa:SIZecommand..value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:DATa:VALuecommand.
error
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:ERRor command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:ERRor?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:ERRor?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.type: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:ERRor:TYPecommand.
header
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:HEADER command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:HEADER?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:HEADER?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:HEADER:VALuecommand.
packetoffdata
property
¶
packetoffdata: SearchSearchItemTriggerABusManchesterPacketoffdata
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:packetOffData command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:packetOffData?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:packetOffData?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:packetOffData:VALuecommand.
sync
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:SYNC command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:SYNC?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:SYNC?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:SYNC:VALuecommand.
trailer
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:TRAILER command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:TRAILER?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:TRAILER?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:TRAILER:VALuecommand.
SearchSearchItemTriggerABusManchesterCondition
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:CONDition command.
Description
- This command specifies a field or condition for an Manchester bus to search on. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:CONDition?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:CONDition?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:CONDition valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:CONDition {SYNCBITS|HEADer|DATa|packetOffData|TRAiler|ERRors}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:CONDition?
Info
SYNCBITSspecifies Sync Bits symbols as the field within an Manchester frame to search on.HEADerspecifies header symbols as the field within an Manchester frame to search on.DATaspecifies data symbols as the field within an Manchester frame to search on.packetOffDataspecifies the binary string used for Manchester triggering if the trigger condition is DATA.TRAilerspecifies trailer symbols as the field within an Manchester frame to search on.ERRorsspecifies error symbols as the field within an Manchester frame to search on.
SearchSearchItemTriggerABusManchesterData
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:DATa command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:DATa?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:DATa?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.size: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:DATa:SIZecommand..value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:DATa:VALuecommand.
size
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:DATa:SIZe command.
Description
- This command specifies the number of bits per word for the specified Manchester bus. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:DATa:SIZe?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:DATa:SIZe?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:DATa:SIZe valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:DATa:SIZe <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:DATa:SIZe?
Info
Search<x>is the number of the search.<NR1>specifies the data string in a valid format. The minimum and default values are 1. The maximum value is 5.
value
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:DATa:VALue command.
Description
- This command specifies the binary string used for Manchester triggering if the trigger
condition is data when searching on an Manchester signal. The search condition needs
to be set to data. The search number is specified by
.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:DATa:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:DATa:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:DATa:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:DATa:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:DATa:VALue?
Info
<QString>is the data value.
SearchSearchItemTriggerABusManchesterDataSize
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:DATa:SIZe command.
Description
- This command specifies the number of bits per word for the specified Manchester bus. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:DATa:SIZe?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:DATa:SIZe?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:DATa:SIZe valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:DATa:SIZe <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:DATa:SIZe?
Info
Search<x>is the number of the search.<NR1>specifies the data string in a valid format. The minimum and default values are 1. The maximum value is 5.
SearchSearchItemTriggerABusManchesterDataValue
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:DATa:VALue command.
Description
- This command specifies the binary string used for Manchester triggering if the trigger
condition is data when searching on an Manchester signal. The search condition needs to be
set to data. The search number is specified by
.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:DATa:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:DATa:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:DATa:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:DATa:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:DATa:VALue?
Info
<QString>is the data value.
SearchSearchItemTriggerABusManchesterError
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:ERRor command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:ERRor?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:ERRor?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.type: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:ERRor:TYPecommand.
type
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:ERRor:TYPe command.
Description
- This command sets or queries the error to be used when searching on a Manchester
signal. The search condition must be set to error. Parity error identifies odd and
even parity. The search number is specified by
.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:ERRor:TYPe?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:ERRor:TYPe?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:ERRor:TYPe valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:ERRor:TYPe {MANChester|PARity}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:ERRor:TYPe?
Info
MANChestersets the error type to Manchester.PARitysets the error type to parity.
SearchSearchItemTriggerABusManchesterErrorType
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:ERRor:TYPe command.
Description
- This command sets or queries the error to be used when searching on a Manchester signal.
The search condition must be set to error. Parity error identifies odd and even parity.
The search number is specified by
.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:ERRor:TYPe?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:ERRor:TYPe?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:ERRor:TYPe valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:ERRor:TYPe {MANChester|PARity}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:ERRor:TYPe?
Info
MANChestersets the error type to Manchester.PARitysets the error type to parity.
SearchSearchItemTriggerABusManchesterHeader
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:HEADER command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:HEADER?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:HEADER?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:HEADER:VALuecommand.
value
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:HEADER:VALue command.
Description
- This command specifies the binary string used for Manchester triggering if the trigger
condition is header when searching on an Manchester signal. The search condition needs
to be set to header. The search number is specified by
.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:HEADER:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:HEADER:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:HEADER:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:HEADER:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:HEADER:VALue?
Info
<QString>is the header value.
SearchSearchItemTriggerABusManchesterHeaderValue
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:HEADER:VALue command.
Description
- This command specifies the binary string used for Manchester triggering if the trigger
condition is header when searching on an Manchester signal. The search condition needs to
be set to header. The search number is specified by
.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:HEADER:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:HEADER:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:HEADER:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:HEADER:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:HEADER:VALue?
Info
<QString>is the header value.
SearchSearchItemTriggerABusManchesterPacketoffdata
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:packetOffData command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:packetOffData?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:packetOffData?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:packetOffData:VALuecommand.
value
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:packetOffData:VALue command.
Description
- This command specifies the binary string used for Manchester triggering if the trigger
condition is DATA. The search number is specified by
.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:packetOffData:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:packetOffData:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:packetOffData:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:packetOffData:VALue <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:packetOffData:VALue?
Info
<NR1>specifies the data string in a valid format.
SearchSearchItemTriggerABusManchesterPacketoffdataValue
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:packetOffData:VALue command.
Description
- This command specifies the binary string used for Manchester triggering if the trigger
condition is DATA. The search number is specified by
.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:packetOffData:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:packetOffData:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:packetOffData:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:packetOffData:VALue <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:packetOffData:VALue?
Info
<NR1>specifies the data string in a valid format.
SearchSearchItemTriggerABusManchesterSync
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:SYNC command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:SYNC?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:SYNC?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:SYNC:VALuecommand.
value
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:SYNC:VALue command.
Description
- This command specifies the binary string used for Manchester triggering if the trigger
condition is Sync when searching on an Manchester signal. The search condition needs
to be set to Sync. The search number is specified by
.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:SYNC:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:SYNC:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:SYNC:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:SYNC:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:SYNC:VALue?
Info
<QSTRING>specifies the data string in a valid format.
SearchSearchItemTriggerABusManchesterSyncValue
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:SYNC:VALue command.
Description
- This command specifies the binary string used for Manchester triggering if the trigger
condition is Sync when searching on an Manchester signal. The search condition needs to be
set to Sync. The search number is specified by
.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:SYNC:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:SYNC:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:SYNC:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:SYNC:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:SYNC:VALue?
Info
<QSTRING>specifies the data string in a valid format.
SearchSearchItemTriggerABusManchesterTrailer
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:TRAILER command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:TRAILER?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:TRAILER?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:TRAILER:VALuecommand.
value
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:TRAILER:VALue command.
Description
- This command specifies the binary string used for Manchester triggering if the trigger
condition is Trailer when searching on an Manchester signal. The search condition
needs to be set to Trailer. The search number is specified by
.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:TRAILER:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:TRAILER:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:TRAILER:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:TRAILER:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:TRAILER:VALue?
Info
<QString>specifies the data string in a valid format.
SearchSearchItemTriggerABusManchesterTrailerValue
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:TRAILER:VALue command.
Description
- This command specifies the binary string used for Manchester triggering if the trigger
condition is Trailer when searching on an Manchester signal. The search condition needs to
be set to Trailer. The search number is specified by
.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:TRAILER:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:TRAILER:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:TRAILER:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:TRAILER:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MANChester:TRAILER:VALue?
Info
<QString>specifies the data string in a valid format.
SearchSearchItemTriggerABusMdio
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.address: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:ADDresscommand tree..condition: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:CONDitioncommand..data: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:DATacommand tree..devicetype: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:DEVicetypecommand tree..errtype: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:ERRTypecommand..opcode: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:OPCodecommand tree..physicaladdress: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:PHYSicaladdresscommand tree..registeraddress: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:REGisteraddresscommand tree.
address
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:ADDress command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:ADDress?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:ADDress?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:ADDress:VALuecommand.
condition
property
¶
condition: SearchSearchItemTriggerABusMdioCondition
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:CONDition command.
Description
- This command sets or queries the trigger condition for MDIO bus. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:CONDition?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:CONDition?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:CONDition valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:CONDition {STARTPACKet|PHYSICALADDRess|REGISTERADDRess|DEVICETYPe|DATA|ADDRess|ERRor}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:CONDition?
Info
STARTPACKetspecifies STARTPACKet as the field within a MDIO frame to search on. This is the default trigger on condition.PHYSICALADDRessspecifies PHYSICALADDRess as the field within a MDIO frame to search on.REGISTERADDRessspecifies REGISTERADDRess as the field within a MDIO frame to search on.DEVICETYPespecifies DEVICETYPe as the field within a MDIO frame to search on.DATAspecifies DATA as the field within a MDIO frame to search on.ADDRessspecifies ADDRess as the field within a MDIO frame to search on.ERRorspecifies ERRor as the field within a MDIO frame to search on.
data
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:DATa command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:DATa?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:DATa?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:DATa:VALuecommand.
devicetype
property
¶
devicetype: SearchSearchItemTriggerABusMdioDevicetype
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:DEVicetype command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:DEVicetype?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:DEVicetype?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:DEVicetype:VALuecommand.
errtype
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:ERRType command.
Description
- This command sets or queries the error type to be used when triggering on MDIO data. This applies when the MDIO bus trigger condition is set to ERRor. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:ERRType?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:ERRType?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:ERRType valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:ERRType {OPCODEERRor|DEVERRor|ANY}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:ERRType?
Info
OPCODEERRorspecifies OPCODEERRor as the field within a MDIO frame to search on. This is the default trigger on condition.DEVERRorspecifies DEVERRor as the field within a MDIO frame to search on.ANYspecifies ANY as the field within a MDIO frame to search on.
opcode
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:OPCode command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:OPCode?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:OPCode?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:OPCode:VALuecommand.
physicaladdress
property
¶
physicaladdress: SearchSearchItemTriggerABusMdioPhysicaladdress
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:PHYSicaladdress command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:PHYSicaladdress?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:PHYSicaladdress?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:PHYSicaladdress:VALuecommand.
registeraddress
property
¶
registeraddress: SearchSearchItemTriggerABusMdioRegisteraddress
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:REGisteraddress command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:REGisteraddress?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:REGisteraddress?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:REGisteraddress:VALuecommand.
SearchSearchItemTriggerABusMdioAddress
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:ADDress command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:ADDress?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:ADDress?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:ADDress:VALuecommand.
value
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:ADDress:VALue command.
Description
- This command specifies the binary address string used for MDIO triggering if the trigger condition is address. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:ADDress:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:ADDress:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:ADDress:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:ADDress:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:ADDress:VALue?
Info
<QString>is the address value. Default address value is XXXXXXXXXXXXXXXX.
SearchSearchItemTriggerABusMdioAddressValue
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:ADDress:VALue command.
Description
- This command specifies the binary address string used for MDIO triggering if the trigger condition is address. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:ADDress:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:ADDress:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:ADDress:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:ADDress:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:ADDress:VALue?
Info
<QString>is the address value. Default address value is XXXXXXXXXXXXXXXX.
SearchSearchItemTriggerABusMdioCondition
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:CONDition command.
Description
- This command sets or queries the trigger condition for MDIO bus. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:CONDition?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:CONDition?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:CONDition valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:CONDition {STARTPACKet|PHYSICALADDRess|REGISTERADDRess|DEVICETYPe|DATA|ADDRess|ERRor}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:CONDition?
Info
STARTPACKetspecifies STARTPACKet as the field within a MDIO frame to search on. This is the default trigger on condition.PHYSICALADDRessspecifies PHYSICALADDRess as the field within a MDIO frame to search on.REGISTERADDRessspecifies REGISTERADDRess as the field within a MDIO frame to search on.DEVICETYPespecifies DEVICETYPe as the field within a MDIO frame to search on.DATAspecifies DATA as the field within a MDIO frame to search on.ADDRessspecifies ADDRess as the field within a MDIO frame to search on.ERRorspecifies ERRor as the field within a MDIO frame to search on.
SearchSearchItemTriggerABusMdioData
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:DATa command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:DATa?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:DATa?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:DATa:VALuecommand.
value
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:DATa:VALue command.
Description
- This command specifies the binary data string used for MDIO triggering if the trigger condition is DATA. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:DATa:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:DATa:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:DATa:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:DATa:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:DATa:VALue?
Info
<QString>is the data value. Default value is XXXXXXXXXXXXXXXX.
SearchSearchItemTriggerABusMdioDataValue
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:DATa:VALue command.
Description
- This command specifies the binary data string used for MDIO triggering if the trigger condition is DATA. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:DATa:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:DATa:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:DATa:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:DATa:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:DATa:VALue?
Info
<QString>is the data value. Default value is XXXXXXXXXXXXXXXX.
SearchSearchItemTriggerABusMdioDevicetype
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:DEVicetype command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:DEVicetype?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:DEVicetype?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:DEVicetype:VALuecommand.
value
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:DEVicetype:VALue command.
Description
- This command specifies the binary device type string used for MDIO triggering if the trigger condition is Device type. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:DEVicetype:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:DEVicetype:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:DEVicetype:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:DEVicetype:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:DEVicetype:VALue?
Info
<QString>is the device type. Default value is XXXXX.
SearchSearchItemTriggerABusMdioDevicetypeValue
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:DEVicetype:VALue command.
Description
- This command specifies the binary device type string used for MDIO triggering if the trigger condition is Device type. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:DEVicetype:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:DEVicetype:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:DEVicetype:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:DEVicetype:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:DEVicetype:VALue?
Info
<QString>is the device type. Default value is XXXXX.
SearchSearchItemTriggerABusMdioErrtype
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:ERRType command.
Description
- This command sets or queries the error type to be used when triggering on MDIO data. This applies when the MDIO bus trigger condition is set to ERRor. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:ERRType?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:ERRType?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:ERRType valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:ERRType {OPCODEERRor|DEVERRor|ANY}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:ERRType?
Info
OPCODEERRorspecifies OPCODEERRor as the field within a MDIO frame to search on. This is the default trigger on condition.DEVERRorspecifies DEVERRor as the field within a MDIO frame to search on.ANYspecifies ANY as the field within a MDIO frame to search on.
SearchSearchItemTriggerABusMdioOpcode
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:OPCode command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:OPCode?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:OPCode?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:OPCode:VALuecommand.
value
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:OPCode:VALue command.
Description
- This command specifies the binary op-code string used for MDIO triggering if the trigger condition is op-code. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:OPCode:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:OPCode:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:OPCode:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:OPCode:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:OPCode:VALue?
Info
<QString>is the op-code value. Default op-code value is XX.
SearchSearchItemTriggerABusMdioOpcodeValue
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:OPCode:VALue command.
Description
- This command specifies the binary op-code string used for MDIO triggering if the trigger condition is op-code. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:OPCode:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:OPCode:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:OPCode:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:OPCode:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:OPCode:VALue?
Info
<QString>is the op-code value. Default op-code value is XX.
SearchSearchItemTriggerABusMdioPhysicaladdress
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:PHYSicaladdress command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:PHYSicaladdress?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:PHYSicaladdress?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:PHYSicaladdress:VALuecommand.
value
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:PHYSicaladdress:VALue command.
Description
- This command specifies the binary physical address string used for MDIO triggering if the trigger condition is physical address. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:PHYSicaladdress:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:PHYSicaladdress:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:PHYSicaladdress:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:PHYSicaladdress:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:PHYSicaladdress:VALue?
Info
<QString>is the physical address value. Default physical address value is XXXXX.
SearchSearchItemTriggerABusMdioPhysicaladdressValue
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:PHYSicaladdress:VALue command.
Description
- This command specifies the binary physical address string used for MDIO triggering if the trigger condition is physical address. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:PHYSicaladdress:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:PHYSicaladdress:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:PHYSicaladdress:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:PHYSicaladdress:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:PHYSicaladdress:VALue?
Info
<QString>is the physical address value. Default physical address value is XXXXX.
SearchSearchItemTriggerABusMdioRegisteraddress
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:REGisteraddress command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:REGisteraddress?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:REGisteraddress?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:REGisteraddress:VALuecommand.
value
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:REGisteraddress:VALue command.
Description
- This command specifies the binary register address string used for MDIO triggering if the trigger condition is register address. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:REGisteraddress:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:REGisteraddress:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:REGisteraddress:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:REGisteraddress:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:REGisteraddress:VALue?
Info
<QString>is the register address value. Default register address value is XXXXX.
SearchSearchItemTriggerABusMdioRegisteraddressValue
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:REGisteraddress:VALue command.
Description
- This command specifies the binary register address string used for MDIO triggering if the trigger condition is register address. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:REGisteraddress:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:REGisteraddress:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:REGisteraddress:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:REGisteraddress:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MDIO:REGisteraddress:VALue?
Info
<QString>is the register address value. Default register address value is XXXXX.
SearchSearchItemTriggerABusMil1553b
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.command: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMANDcommand tree..condition: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:CONDitioncommand..data: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:DATacommand tree..errtype: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:ERRTYPecommand..status: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATuscommand tree.
command
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.address: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:ADDResscommand tree..count: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:COUNtcommand..parity: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:PARitycommand..subaddress: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:SUBADdresscommand..trbit: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:TRBitcommand.
condition
property
¶
condition: SearchSearchItemTriggerABusMil1553bCondition
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:CONDition command.
Description
- This command sets or queries the field or condition for a MIL-STD-1553 bus to search on. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:CONDition?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:CONDition?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:CONDition valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:CONDition {SYNC|COMMAND|STATus|DATA|ERRor}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:CONDition?
Info
SYNCspecifies a search for the sync pulse of any word.COMMANDspecifies a search for a matching command word.STATusspecifies a search for a matching status word.DATAspecifies a search for a matching data word.ERRorspecifies a search for a specified error condition.
data
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:DATa command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:DATa?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:DATa?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.parity: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:DATa:PARitycommand..value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:DATa:VALuecommand.
errtype
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:ERRTYPe command.
Description
- This command sets or queries the type of error condition for a MIL-STD-1553 bus to search on. The search number is specified by x. The search condition must be set to ERRor.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:ERRTYPe?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:ERRTYPe?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:ERRTYPe valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:ERRTYPe {PARity|SYNC|DATA}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:ERRTYPe?
Info
PARityspecifies searching for an incorrectly calculated parity bit in any word.SYNCspecifies searching for any sync pulse that does not transition in the middle of the pulse as required.DATAspecifies searching for any non-contiguous data words.
status
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.address: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:ADDResscommand tree..bit: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:BITcommand tree..parity: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:PARitycommand.
SearchSearchItemTriggerABusMil1553bCommand
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.address: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:ADDResscommand tree..count: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:COUNtcommand..parity: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:PARitycommand..subaddress: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:SUBADdresscommand..trbit: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:TRBitcommand.
address
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:ADDRess command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:ADDRess?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:ADDRess?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.hivalue: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:ADDRess:HIVALuecommand..qualifier: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:ADDRess:QUALifiercommand..value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:ADDRess:VALuecommand.
count
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:COUNt command.
Description
- This command specifies the bit pattern for the 5-bit Word Count/Mode Code sub-address
field to use in a MIL-STD-1553 bus command word trigger. (Use the
commandSEARCH:SEARCHX:TRIGGER:A:BUS:MIL1553B:COMMAND:SUBADDRESSto specify Word Count or Mode Code.) In Word Count mode, this field defines the number of data words to be transmitted or received, depending on the T/R bit setting. (Use thecommandSEARCH:SEARCHX:TRIGGER:A:BUS:MIL1553B:COMMAND:TRBITto set the T/R bit.) A word count value of 0 actually indicates a transfer of 32 data words.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:COUNt?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:COUNt?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:COUNt valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:COUNt <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:COUNt?
Info
QStringis a quoted string of up to 5 characters, where the allowable characters are 0, 1 and X.
parity
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:PARity command.
Description
- This command sets or queries the value of the command word parity bit for a MIL-STD-1553 bus to search on. The search number is specified by x. The search condition must be set to COMMAND.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:PARity?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:PARity?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:PARity valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:PARity {ONE|ZERo|NOCARE}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:PARity?
Info
ONEfilters command words to only match those where the parity bit has a value of 1.ZERofilters command words to only match those where the parity bit has a value of 0.NOCAREdisables filtering of command words on the parity bit.
subaddress
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:SUBADdress command.
Description
- This command specifies the 5 bit sub-address to use in a MIL-STD-1553 bus command word sub-address search. When the sub-address value is set to 00000 or 11111 binary, it specifies that the command is a ‘Mode Code’ command. Any other value specifies that it is a ‘Word Count’ command. The default is all X’s (don’t care). The search condition needs to be set to COMMAND.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:SUBADdress?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:SUBADdress?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:SUBADdress valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:SUBADdress <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:SUBADdress?
Info
<QString>is the word count value.
trbit
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:TRBit command.
Description
- This command sets or queries the value of the command word Transmit / Receive bit for a MIL-STD-1553 bus to search on. The search number is specified by x. The search condition must be set to COMMAND.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:TRBit?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:TRBit?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:TRBit valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:TRBit {RX|TX|X}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:TRBit?
Info
RXfilters command words to only match those that are receive packets.TXfilters command words to only match those that are transmit packets.Xdisables filtering of command words on the R/T bit.
SearchSearchItemTriggerABusMil1553bCommandAddress
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:ADDRess command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:ADDRess?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:ADDRess?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.hivalue: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:ADDRess:HIVALuecommand..qualifier: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:ADDRess:QUALifiercommand..value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:ADDRess:VALuecommand.
hivalue
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:ADDRess:HIVALue command.
Description
- This command sets or queries the high value when searching on command word addresses for a MIL-STD-1553 bus. The search number is specified by x. The search condition must be set to COMMAND, and the address qualifier must be INrange or OUTrange.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:ADDRess:HIVALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:ADDRess:HIVALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:ADDRess:HIVALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:ADDRess:HIVALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:ADDRess:HIVALue?
Info
<QString>is the address value.
qualifier
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:ADDRess:QUALifier command.
Description
- This command sets or queries the qualifier to be used when searching on command word addresses for a MIL-STD-1553 bus. The search number is specified by x. The search condition must be set to COMMAND.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:ADDRess:QUALifier?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:ADDRess:QUALifier?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:ADDRess:QUALifier valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:ADDRess:QUALifier {EQual|UNEQual|LESSthan|MOREthan|LESSEQual|MOREEQual|INrange|OUTrange}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:ADDRess:QUALifier?
Info
EQualsets the data qualifier to equal.LESSEQualsets the data qualifier to less equal.MOREEQualsets the data qualifier to more equal.UNEQualsets the data qualifier to unequal.LESSthansets the data qualifier to less than.MOREthansets the data qualifier to more than.INrangesets the data qualifier to in range.OUTrangesets the data qualifier out of range.
value
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:ADDRess:VALue command.
Description
- This command specifies the value of the 5-bit remote terminal address to use in a MIL-STD-1553 bus command word search. The search condition needs to be set to COMMAND.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:ADDRess:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:ADDRess:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:ADDRess:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:ADDRess:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:ADDRess:VALue?
Info
<QString>is the address value.
SearchSearchItemTriggerABusMil1553bCommandAddressHivalue
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:ADDRess:HIVALue command.
Description
- This command sets or queries the high value when searching on command word addresses for a MIL-STD-1553 bus. The search number is specified by x. The search condition must be set to COMMAND, and the address qualifier must be INrange or OUTrange.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:ADDRess:HIVALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:ADDRess:HIVALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:ADDRess:HIVALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:ADDRess:HIVALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:ADDRess:HIVALue?
Info
<QString>is the address value.
SearchSearchItemTriggerABusMil1553bCommandAddressQualifier
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:ADDRess:QUALifier command.
Description
- This command sets or queries the qualifier to be used when searching on command word addresses for a MIL-STD-1553 bus. The search number is specified by x. The search condition must be set to COMMAND.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:ADDRess:QUALifier?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:ADDRess:QUALifier?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:ADDRess:QUALifier valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:ADDRess:QUALifier {EQual|UNEQual|LESSthan|MOREthan|LESSEQual|MOREEQual|INrange|OUTrange}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:ADDRess:QUALifier?
Info
EQualsets the data qualifier to equal.LESSEQualsets the data qualifier to less equal.MOREEQualsets the data qualifier to more equal.UNEQualsets the data qualifier to unequal.LESSthansets the data qualifier to less than.MOREthansets the data qualifier to more than.INrangesets the data qualifier to in range.OUTrangesets the data qualifier out of range.
SearchSearchItemTriggerABusMil1553bCommandAddressValue
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:ADDRess:VALue command.
Description
- This command specifies the value of the 5-bit remote terminal address to use in a MIL-STD-1553 bus command word search. The search condition needs to be set to COMMAND.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:ADDRess:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:ADDRess:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:ADDRess:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:ADDRess:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:ADDRess:VALue?
Info
<QString>is the address value.
SearchSearchItemTriggerABusMil1553bCommandCount
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:COUNt command.
Description
- This command specifies the bit pattern for the 5-bit Word Count/Mode Code sub-address
field to use in a MIL-STD-1553 bus command word trigger. (Use the
commandSEARCH:SEARCHX:TRIGGER:A:BUS:MIL1553B:COMMAND:SUBADDRESSto specify Word Count or Mode Code.) In Word Count mode, this field defines the number of data words to be transmitted or received, depending on the T/R bit setting. (Use thecommandSEARCH:SEARCHX:TRIGGER:A:BUS:MIL1553B:COMMAND:TRBITto set the T/R bit.) A word count value of 0 actually indicates a transfer of 32 data words.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:COUNt?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:COUNt?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:COUNt valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:COUNt <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:COUNt?
Info
QStringis a quoted string of up to 5 characters, where the allowable characters are 0, 1 and X.
SearchSearchItemTriggerABusMil1553bCommandParity
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:PARity command.
Description
- This command sets or queries the value of the command word parity bit for a MIL-STD-1553 bus to search on. The search number is specified by x. The search condition must be set to COMMAND.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:PARity?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:PARity?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:PARity valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:PARity {ONE|ZERo|NOCARE}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:PARity?
Info
ONEfilters command words to only match those where the parity bit has a value of 1.ZERofilters command words to only match those where the parity bit has a value of 0.NOCAREdisables filtering of command words on the parity bit.
SearchSearchItemTriggerABusMil1553bCommandSubaddress
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:SUBADdress command.
Description
- This command specifies the 5 bit sub-address to use in a MIL-STD-1553 bus command word sub-address search. When the sub-address value is set to 00000 or 11111 binary, it specifies that the command is a ‘Mode Code’ command. Any other value specifies that it is a ‘Word Count’ command. The default is all X’s (don’t care). The search condition needs to be set to COMMAND.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:SUBADdress?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:SUBADdress?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:SUBADdress valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:SUBADdress <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:SUBADdress?
Info
<QString>is the word count value.
SearchSearchItemTriggerABusMil1553bCommandTrbit
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:TRBit command.
Description
- This command sets or queries the value of the command word Transmit / Receive bit for a MIL-STD-1553 bus to search on. The search number is specified by x. The search condition must be set to COMMAND.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:TRBit?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:TRBit?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:TRBit valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:TRBit {RX|TX|X}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:TRBit?
Info
RXfilters command words to only match those that are receive packets.TXfilters command words to only match those that are transmit packets.Xdisables filtering of command words on the R/T bit.
SearchSearchItemTriggerABusMil1553bCondition
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:CONDition command.
Description
- This command sets or queries the field or condition for a MIL-STD-1553 bus to search on. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:CONDition?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:CONDition?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:CONDition valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:CONDition {SYNC|COMMAND|STATus|DATA|ERRor}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:CONDition?
Info
SYNCspecifies a search for the sync pulse of any word.COMMANDspecifies a search for a matching command word.STATusspecifies a search for a matching status word.DATAspecifies a search for a matching data word.ERRorspecifies a search for a specified error condition.
SearchSearchItemTriggerABusMil1553bData
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:DATa command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:DATa?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:DATa?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.parity: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:DATa:PARitycommand..value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:DATa:VALuecommand.
parity
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:DATa:PARity command.
Description
- This command sets or queries the value of the command word parity bit for a MIL-STD-1553 bus to search on. The search number is specified by x. The search condition must be set to DATA.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:DATa:PARity?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:DATa:PARity?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:DATa:PARity valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:DATa:PARity {ONE|ZERo|NOCARE}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:DATa:PARity?
Info
ONEfilters data words to only match those where the parity bit has a value of 1.ZERofilters data words to only match those where the parity bit has a value of 0.NOCAREdisables filtering of data words on the parity bit.
value
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:DATa:VALue command.
Description
- This command sets or queries the value when searching on data words for a MIL-STD-1553 bus. The search number is specified by x. The search condition must be set to DATA.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:DATa:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:DATa:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:DATa:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:DATa:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:DATa:VALue?
Info
<QString>is the data value.
SearchSearchItemTriggerABusMil1553bDataParity
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:DATa:PARity command.
Description
- This command sets or queries the value of the command word parity bit for a MIL-STD-1553 bus to search on. The search number is specified by x. The search condition must be set to DATA.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:DATa:PARity?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:DATa:PARity?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:DATa:PARity valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:DATa:PARity {ONE|ZERo|NOCARE}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:DATa:PARity?
Info
ONEfilters data words to only match those where the parity bit has a value of 1.ZERofilters data words to only match those where the parity bit has a value of 0.NOCAREdisables filtering of data words on the parity bit.
SearchSearchItemTriggerABusMil1553bDataValue
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:DATa:VALue command.
Description
- This command sets or queries the value when searching on data words for a MIL-STD-1553 bus. The search number is specified by x. The search condition must be set to DATA.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:DATa:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:DATa:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:DATa:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:DATa:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:DATa:VALue?
Info
<QString>is the data value.
SearchSearchItemTriggerABusMil1553bErrtype
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:ERRTYPe command.
Description
- This command sets or queries the type of error condition for a MIL-STD-1553 bus to search on. The search number is specified by x. The search condition must be set to ERRor.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:ERRTYPe?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:ERRTYPe?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:ERRTYPe valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:ERRTYPe {PARity|SYNC|DATA}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:ERRTYPe?
Info
PARityspecifies searching for an incorrectly calculated parity bit in any word.SYNCspecifies searching for any sync pulse that does not transition in the middle of the pulse as required.DATAspecifies searching for any non-contiguous data words.
SearchSearchItemTriggerABusMil1553bStatus
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.address: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:ADDResscommand tree..bit: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:BITcommand tree..parity: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:PARitycommand.
address
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:ADDRess command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:ADDRess?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:ADDRess?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.hivalue: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:ADDRess:HIVALuecommand..qualifier: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:ADDRess:QUALifiercommand..value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:ADDRess:VALuecommand.
bit
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:BIT command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:BIT?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:BIT?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.bcr: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:BIT:BCRcommand..busy: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:BIT:BUSYcommand..dbca: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:BIT:DBCAcommand..instr: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:BIT:INSTRcommand..me: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:BIT:MEcommand..srq: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:BIT:SRQcommand..subsf: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:BIT:SUBSFcommand..tf: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:BIT:TFcommand.
parity
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:PARity command.
Description
- This command sets or queries the value of the status word parity bit for a MIL-STD-1553 bus to search on. The search number is specified by x. The search condition must be set to STATus.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:PARity?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:PARity?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:PARity valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:PARity {ONE|ZERo|NOCARE}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:PARity?
Info
ONEfilters status words to only match those where the parity bit has a value of 1.ZERofilters status words to only match those where the parity bit has a value of 0.NOCAREdisables filtering of status words on the parity bit.
SearchSearchItemTriggerABusMil1553bStatusAddress
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:ADDRess command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:ADDRess?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:ADDRess?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.hivalue: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:ADDRess:HIVALuecommand..qualifier: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:ADDRess:QUALifiercommand..value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:ADDRess:VALuecommand.
hivalue
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:ADDRess:HIVALue command.
Description
- This command sets or queries the high value when searching on status word addresses for a MIL-STD-1553 bus. The search number is specified by x. The search condition must be set to STATus and the address qualifier must be INrange or OUTrange.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:ADDRess:HIVALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:ADDRess:HIVALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:ADDRess:HIVALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:ADDRess:HIVALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:ADDRess:HIVALue?
Info
<QString>is the address value.
qualifier
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:ADDRess:QUALifier command.
Description
- This command sets or queries the qualifier used when searching on status word addresses for a MIL-STD-1553 bus. The search number is specified by x. The search condition must be set to STATus.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:ADDRess:QUALifier?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:ADDRess:QUALifier?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:ADDRess:QUALifier valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:ADDRess:QUALifier {EQual|UNEQual|LESSthan|MOREthan|LESSEQual|MOREEQual|INrange|OUTrange}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:ADDRess:QUALifier?
Info
EQualsets the data qualifier to equal.LESSEQualsets the data qualifier to less equal.MOREEQualsets the data qualifier to more equal.UNEQualsets the data qualifier to unequal.LESSthansets the data qualifier to less than.MOREthansets the data qualifier to more than.INrangesets the data qualifier to in range.OUTrangesets the data qualifier out of range.
value
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:ADDRess:VALue command.
Description
- This command sets or queries the low value when searching on status word addresses for a MIL-STD-1553 bus. The search number is specified by x. The search condition must be set to STATus.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:ADDRess:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:ADDRess:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:ADDRess:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:ADDRess:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:ADDRess:VALue?
Info
<QString>is the address value.
SearchSearchItemTriggerABusMil1553bStatusAddressHivalue
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:ADDRess:HIVALue command.
Description
- This command sets or queries the high value when searching on status word addresses for a MIL-STD-1553 bus. The search number is specified by x. The search condition must be set to STATus and the address qualifier must be INrange or OUTrange.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:ADDRess:HIVALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:ADDRess:HIVALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:ADDRess:HIVALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:ADDRess:HIVALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:ADDRess:HIVALue?
Info
<QString>is the address value.
SearchSearchItemTriggerABusMil1553bStatusAddressQualifier
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:ADDRess:QUALifier command.
Description
- This command sets or queries the qualifier used when searching on status word addresses for a MIL-STD-1553 bus. The search number is specified by x. The search condition must be set to STATus.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:ADDRess:QUALifier?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:ADDRess:QUALifier?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:ADDRess:QUALifier valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:ADDRess:QUALifier {EQual|UNEQual|LESSthan|MOREthan|LESSEQual|MOREEQual|INrange|OUTrange}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:ADDRess:QUALifier?
Info
EQualsets the data qualifier to equal.LESSEQualsets the data qualifier to less equal.MOREEQualsets the data qualifier to more equal.UNEQualsets the data qualifier to unequal.LESSthansets the data qualifier to less than.MOREthansets the data qualifier to more than.INrangesets the data qualifier to in range.OUTrangesets the data qualifier out of range.
SearchSearchItemTriggerABusMil1553bStatusAddressValue
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:ADDRess:VALue command.
Description
- This command sets or queries the low value when searching on status word addresses for a MIL-STD-1553 bus. The search number is specified by x. The search condition must be set to STATus.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:ADDRess:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:ADDRess:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:ADDRess:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:ADDRess:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:ADDRess:VALue?
Info
<QString>is the address value.
SearchSearchItemTriggerABusMil1553bStatusBit
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:BIT command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:BIT?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:BIT?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.bcr: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:BIT:BCRcommand..busy: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:BIT:BUSYcommand..dbca: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:BIT:DBCAcommand..instr: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:BIT:INSTRcommand..me: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:BIT:MEcommand..srq: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:BIT:SRQcommand..subsf: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:BIT:SUBSFcommand..tf: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:BIT:TFcommand.
bcr
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:BIT:BCR command.
Description
- This command sets or queries the value of the broadcast command received bit (BCR bit, bit 15) in a status word for a MIL-STD-1553 bus to search on. The search number is specified by x. The search condition must be set to STATus.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:BIT:BCR?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:BIT:BCR?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:BIT:BCR valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:BIT:BCR {ONE|ZERo|NOCARE}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:BIT:BCR?
Info
ONEfilters status words to only match those where the BCR bit has a value of 1.ZERofilters status words to only match those where the BCR bit has a value of 0.NOCAREdisables filtering of status words on the BCR bit.
busy
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:BIT:BUSY command.
Description
- This command sets or queries the value of the busy bit (BUSY bit, bit 16) in a status word for a MIL-STD-1553 bus to search on. The search number is specified by x. The search condition must be set to STATus.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:BIT:BUSY?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:BIT:BUSY?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:BIT:BUSY valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:BIT:BUSY {ONE|ZERo|NOCARE}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:BIT:BUSY?
Info
ONEfilters status words to only match those where the BUSY bit has a value of 1.ZERofilters status words to only match those where the BUSY bit has a value of 0.NOCAREdisables filtering of status words on the BUSY bit.
dbca
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:BIT:DBCA command.
Description
- This command sets or queries the value of the dynamic bus control acceptance bit (DBCA bit, bit 18) in a status word for a MIL-STD-1553 bus to search on. The search number is specified by x. The search condition must be set to STATus.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:BIT:DBCA?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:BIT:DBCA?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:BIT:DBCA valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:BIT:DBCA {ONE|ZERo|NOCARE}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:BIT:DBCA?
Info
ONEfilters status words to only match those where the DBCA bit has a value of 1.ZERofilters status words to only match those where the DBCA bit has a value of 0.NOCAREdisables filtering of status words on the DBCA bit.
instr
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:BIT:INSTR command.
Description
- This command sets or queries the value of the instrumentation bit (INSTR bit, bit 10) in a status word for a MIL-STD-1553 bus to search on. The search number is specified by x. The search condition must be set to STATus.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:BIT:INSTR?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:BIT:INSTR?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:BIT:INSTR valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:BIT:INSTR {ONE|ZERo|NOCARE}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:BIT:INSTR?
Info
ONEfilters status words to only match those where the INSTR bit has a value of 1.ZERofilters status words to only match those where the INSTR bit has a value of 0.NOCAREdisables filtering of status words on the INSTR bit.
me
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:BIT:ME command.
Description
- This command sets or queries the value of the message error bit (ME bit, bit 9) in a status word for a MIL-STD-1553 bus to search on. The search number is specified by x. The search condition must be set to STATus.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:BIT:ME?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:BIT:ME?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:BIT:ME valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:BIT:ME {ONE|ZERo|NOCARE}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:BIT:ME?
Info
ONEfilters status words to only match those where the ME bit has a value of 1.ZERofilters status words to only match those where the ME bit has a value of 0.NOCAREdisables filtering of status words on the ME bit.
srq
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:BIT:SRQ command.
Description
- This command sets or queries the value of the status word service request bit (SRQ bit, bit 11) in a status word for a MIL-STD-1553 bus to search on. The search number is specified by x. The search condition must be set to STATus.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:BIT:SRQ?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:BIT:SRQ?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:BIT:SRQ valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:BIT:SRQ {ONE|ZERo|NOCARE}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:BIT:SRQ?
Info
ONEfilters status words to only match those where the SRQ bit has a value of 1.ZERofilters status words to only match those where the SRQ bit has a value of 0.NOCAREdisables filtering of status words on the SRQ bit.
subsf
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:BIT:SUBSF command.
Description
- This command sets or queries the value of the subsystem flag bit (SUBSF bit, bit 17) in a status word for a MIL-STD-1553 bus to search on. The search number is specified by x>. The search condition must be set to STATus.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:BIT:SUBSF?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:BIT:SUBSF?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:BIT:SUBSF valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:BIT:SUBSF {ONE|ZERo|NOCARE}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:BIT:SUBSF?
Info
ONEfilters status words to only match those where the SUBSF bit has a value of 1.ZERofilters status words to only match those where the SUBSF bit has a value of 0.NOCAREdisables filtering of status words on the SUBSF bit.
tf
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:BIT:TF command.
Description
- This command sets or queries the value of the terminal flag bit (TF bit, bit 19) in a status word for a MIL-STD-1553 bus to search on. The search number is specified by x. The search condition must be set to STATus.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:BIT:TF?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:BIT:TF?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:BIT:TF valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:BIT:TF {ONE|ZERo|NOCARE}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:BIT:TF?
Info
ONEfilters status words to only match those where the TF bit has a value of 1.ZERofilters status words to only match those where the TF bit has a value of 0.NOCAREdisables filtering of status words on the TF bit.
SearchSearchItemTriggerABusMil1553bStatusBitBcr
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:BIT:BCR command.
Description
- This command sets or queries the value of the broadcast command received bit (BCR bit, bit 15) in a status word for a MIL-STD-1553 bus to search on. The search number is specified by x. The search condition must be set to STATus.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:BIT:BCR?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:BIT:BCR?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:BIT:BCR valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:BIT:BCR {ONE|ZERo|NOCARE}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:BIT:BCR?
Info
ONEfilters status words to only match those where the BCR bit has a value of 1.ZERofilters status words to only match those where the BCR bit has a value of 0.NOCAREdisables filtering of status words on the BCR bit.
SearchSearchItemTriggerABusMil1553bStatusBitBusy
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:BIT:BUSY command.
Description
- This command sets or queries the value of the busy bit (BUSY bit, bit 16) in a status word for a MIL-STD-1553 bus to search on. The search number is specified by x. The search condition must be set to STATus.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:BIT:BUSY?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:BIT:BUSY?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:BIT:BUSY valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:BIT:BUSY {ONE|ZERo|NOCARE}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:BIT:BUSY?
Info
ONEfilters status words to only match those where the BUSY bit has a value of 1.ZERofilters status words to only match those where the BUSY bit has a value of 0.NOCAREdisables filtering of status words on the BUSY bit.
SearchSearchItemTriggerABusMil1553bStatusBitDbca
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:BIT:DBCA command.
Description
- This command sets or queries the value of the dynamic bus control acceptance bit (DBCA bit, bit 18) in a status word for a MIL-STD-1553 bus to search on. The search number is specified by x. The search condition must be set to STATus.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:BIT:DBCA?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:BIT:DBCA?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:BIT:DBCA valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:BIT:DBCA {ONE|ZERo|NOCARE}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:BIT:DBCA?
Info
ONEfilters status words to only match those where the DBCA bit has a value of 1.ZERofilters status words to only match those where the DBCA bit has a value of 0.NOCAREdisables filtering of status words on the DBCA bit.
SearchSearchItemTriggerABusMil1553bStatusBitInstr
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:BIT:INSTR command.
Description
- This command sets or queries the value of the instrumentation bit (INSTR bit, bit 10) in a status word for a MIL-STD-1553 bus to search on. The search number is specified by x. The search condition must be set to STATus.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:BIT:INSTR?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:BIT:INSTR?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:BIT:INSTR valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:BIT:INSTR {ONE|ZERo|NOCARE}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:BIT:INSTR?
Info
ONEfilters status words to only match those where the INSTR bit has a value of 1.ZERofilters status words to only match those where the INSTR bit has a value of 0.NOCAREdisables filtering of status words on the INSTR bit.
SearchSearchItemTriggerABusMil1553bStatusBitMe
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:BIT:ME command.
Description
- This command sets or queries the value of the message error bit (ME bit, bit 9) in a status word for a MIL-STD-1553 bus to search on. The search number is specified by x. The search condition must be set to STATus.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:BIT:ME?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:BIT:ME?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:BIT:ME valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:BIT:ME {ONE|ZERo|NOCARE}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:BIT:ME?
Info
ONEfilters status words to only match those where the ME bit has a value of 1.ZERofilters status words to only match those where the ME bit has a value of 0.NOCAREdisables filtering of status words on the ME bit.
SearchSearchItemTriggerABusMil1553bStatusBitSrq
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:BIT:SRQ command.
Description
- This command sets or queries the value of the status word service request bit (SRQ bit, bit 11) in a status word for a MIL-STD-1553 bus to search on. The search number is specified by x. The search condition must be set to STATus.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:BIT:SRQ?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:BIT:SRQ?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:BIT:SRQ valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:BIT:SRQ {ONE|ZERo|NOCARE}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:BIT:SRQ?
Info
ONEfilters status words to only match those where the SRQ bit has a value of 1.ZERofilters status words to only match those where the SRQ bit has a value of 0.NOCAREdisables filtering of status words on the SRQ bit.
SearchSearchItemTriggerABusMil1553bStatusBitSubsf
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:BIT:SUBSF command.
Description
- This command sets or queries the value of the subsystem flag bit (SUBSF bit, bit 17) in a status word for a MIL-STD-1553 bus to search on. The search number is specified by x>. The search condition must be set to STATus.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:BIT:SUBSF?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:BIT:SUBSF?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:BIT:SUBSF valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:BIT:SUBSF {ONE|ZERo|NOCARE}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:BIT:SUBSF?
Info
ONEfilters status words to only match those where the SUBSF bit has a value of 1.ZERofilters status words to only match those where the SUBSF bit has a value of 0.NOCAREdisables filtering of status words on the SUBSF bit.
SearchSearchItemTriggerABusMil1553bStatusBitTf
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:BIT:TF command.
Description
- This command sets or queries the value of the terminal flag bit (TF bit, bit 19) in a status word for a MIL-STD-1553 bus to search on. The search number is specified by x. The search condition must be set to STATus.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:BIT:TF?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:BIT:TF?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:BIT:TF valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:BIT:TF {ONE|ZERo|NOCARE}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:BIT:TF?
Info
ONEfilters status words to only match those where the TF bit has a value of 1.ZERofilters status words to only match those where the TF bit has a value of 0.NOCAREdisables filtering of status words on the TF bit.
SearchSearchItemTriggerABusMil1553bStatusParity
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:PARity command.
Description
- This command sets or queries the value of the status word parity bit for a MIL-STD-1553 bus to search on. The search number is specified by x. The search condition must be set to STATus.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:PARity?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:PARity?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:PARity valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:PARity {ONE|ZERo|NOCARE}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:PARity?
Info
ONEfilters status words to only match those where the parity bit has a value of 1.ZERofilters status words to only match those where the parity bit has a value of 0.NOCAREdisables filtering of status words on the parity bit.
SearchSearchItemTriggerABusNrz
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:NRZ command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:NRZ?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:NRZ?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.data: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:NRZ:DATacommand tree.
data
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:NRZ:DATa command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:NRZ:DATa?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:NRZ:DATa?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.size: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:NRZ:DATa:SIZecommand..value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:NRZ:DATa:VALuecommand.
SearchSearchItemTriggerABusNrzData
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:NRZ:DATa command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:NRZ:DATa?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:NRZ:DATa?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.size: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:NRZ:DATa:SIZecommand..value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:NRZ:DATa:VALuecommand.
size
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:NRZ:DATa:SIZe command.
Description
- This command specifies the length of the data string, in bytes, to use when searching on the NRZ signal. The search condition needs to be set to DATa. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:NRZ:DATa:SIZe?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:NRZ:DATa:SIZe?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:NRZ:DATa:SIZe valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:NRZ:DATa:SIZe <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:NRZ:DATa:SIZe?
Info
Search<x>is the number of the search.<NR1>specifies the data string in a valid format. The minimum and default values are 1. The maximum value is 5.
value
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:NRZ:DATa:VALue command.
Description
- This command sets or queries the binary data value to be used when searching on a NRZ signal. The search condition must be set to DATA.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:NRZ:DATa:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:NRZ:DATa:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:NRZ:DATa:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:NRZ:DATa:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:NRZ:DATa:VALue?
Info
Search<x>is the number of the search.<QString>specifies the data value in a valid format.
SearchSearchItemTriggerABusNrzDataSize
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:NRZ:DATa:SIZe command.
Description
- This command specifies the length of the data string, in bytes, to use when searching on the NRZ signal. The search condition needs to be set to DATa. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:NRZ:DATa:SIZe?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:NRZ:DATa:SIZe?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:NRZ:DATa:SIZe valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:NRZ:DATa:SIZe <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:NRZ:DATa:SIZe?
Info
Search<x>is the number of the search.<NR1>specifies the data string in a valid format. The minimum and default values are 1. The maximum value is 5.
SearchSearchItemTriggerABusNrzDataValue
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:NRZ:DATa:VALue command.
Description
- This command sets or queries the binary data value to be used when searching on a NRZ signal. The search condition must be set to DATA.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:NRZ:DATa:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:NRZ:DATa:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:NRZ:DATa:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:NRZ:DATa:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:NRZ:DATa:VALue?
Info
Search<x>is the number of the search.<QString>specifies the data value in a valid format.
SearchSearchItemTriggerABusOnewire
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.command: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:COMMandcommand tree..condition: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:CONDitioncommand..data: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:DATacommand tree..matchrom: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:MATCHROMcommand tree..overdrive: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:OVERDRIVecommand tree..readrom: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:READROMcommand tree..searchrom: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:SEARCHROMcommand tree.
command
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:COMMand command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:COMMand?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:COMMand?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:COMMand:VALuecommand.
condition
property
¶
condition: SearchSearchItemTriggerABusOnewireCondition
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:CONDition command.
Description
- This command sets or queries the trigger condition for a ONEWIRe bus. MODe should be set to Overdrive for OVERDRIVEMATCh and OVERDRIVESKIP. MODe should be set to Standard for READROM, MATCHROM, SKIPROM, SEARCHROM, ALARMSEARch. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:CONDition?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:CONDition?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:CONDition valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:CONDition {RESet|PREsence|COMMand|DATa|READROM|MATCHROM|OVERDRIVEMATCh|SKIPROM|OVERDRIVESKIP|SEARCHROM|ALARMSEARch|CRCERRor}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:CONDition?
Info
Search<x>is the number of the search.RESetspecifies the search condition as RESet. Reset is the default trigger on condition.PREsencespecifies the search condition as PREsence.COMMandspecifies the search condition as COMMand.DATaspecifies the search condition as DATa.READROMspecifies the search condition as READROM.MATCHROMspecifies the search condition as MATCHROM.SKIPROMspecifies the search condition as SKIPROM.SEARCHROMspecifies the search condition as SEARCHROM.ALARMSEARchspecifies the search condition as ALARMSEARch.CRCERRorspecifies the search condition as CRCERRor.
data
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:DATa command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:DATa?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:DATa?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.size: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:DATa:SIZecommand..value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:DATa:VALuecommand.
matchrom
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:MATCHROM command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:MATCHROM?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:MATCHROM?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.familycode: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:MATCHROM:FAMILYCODecommand..serialnumber: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:MATCHROM:SERIALNUMBercommand.
overdrive
property
¶
overdrive: SearchSearchItemTriggerABusOnewireOverdrive
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:OVERDRIVe command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:OVERDRIVe?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:OVERDRIVe?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.familycode: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:OVERDRIVe:FAMILYCODecommand..serialnumber: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:OVERDRIVe:SERIALNUMBercommand.
readrom
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:READROM command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:READROM?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:READROM?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.familycode: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:READROM:FAMILYCODecommand..serialnumber: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:READROM:SERIALNUMBercommand.
searchrom
property
¶
searchrom: SearchSearchItemTriggerABusOnewireSearchrom
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:SEARCHROM command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:SEARCHROM?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:SEARCHROM?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.romcode: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:SEARCHROM:ROMCODecommand.
SearchSearchItemTriggerABusOnewireCommand
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:COMMand command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:COMMand?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:COMMand?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:COMMand:VALuecommand.
value
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:COMMand:VALue command.
Description
- This command specifies the binary data string used for ONEWIRe triggering if the trigger condition is COMMAND.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:COMMand:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:COMMand:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:COMMand:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:COMMand:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:COMMand:VALue?
Info
Search<x>is the number of the search.<QString>specifies the data value in a valid format. The default size and value for COMMAND is 8 bits and ‘XXXXXXXX’.
SearchSearchItemTriggerABusOnewireCommandValue
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:COMMand:VALue command.
Description
- This command specifies the binary data string used for ONEWIRe triggering if the trigger condition is COMMAND.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:COMMand:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:COMMand:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:COMMand:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:COMMand:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:COMMand:VALue?
Info
Search<x>is the number of the search.<QString>specifies the data value in a valid format. The default size and value for COMMAND is 8 bits and ‘XXXXXXXX’.
SearchSearchItemTriggerABusOnewireCondition
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:CONDition command.
Description
- This command sets or queries the trigger condition for a ONEWIRe bus. MODe should be set to Overdrive for OVERDRIVEMATCh and OVERDRIVESKIP. MODe should be set to Standard for READROM, MATCHROM, SKIPROM, SEARCHROM, ALARMSEARch. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:CONDition?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:CONDition?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:CONDition valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:CONDition {RESet|PREsence|COMMand|DATa|READROM|MATCHROM|OVERDRIVEMATCh|SKIPROM|OVERDRIVESKIP|SEARCHROM|ALARMSEARch|CRCERRor}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:CONDition?
Info
Search<x>is the number of the search.RESetspecifies the search condition as RESet. Reset is the default trigger on condition.PREsencespecifies the search condition as PREsence.COMMandspecifies the search condition as COMMand.DATaspecifies the search condition as DATa.READROMspecifies the search condition as READROM.MATCHROMspecifies the search condition as MATCHROM.SKIPROMspecifies the search condition as SKIPROM.SEARCHROMspecifies the search condition as SEARCHROM.ALARMSEARchspecifies the search condition as ALARMSEARch.CRCERRorspecifies the search condition as CRCERRor.
SearchSearchItemTriggerABusOnewireData
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:DATa command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:DATa?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:DATa?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.size: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:DATa:SIZecommand..value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:DATa:VALuecommand.
size
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:DATa:SIZe command.
Description
- This command specifies the length of the data string in bytes to be used for ONEWIRe triggering if the trigger condition is DATA. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:DATa:SIZe?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:DATa:SIZe?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:DATa:SIZe valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:DATa:SIZe <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:DATa:SIZe?
Info
Search<x>is the number of the search.<NR1>specifies the data string in a valid format. The minimum and default values are 1. The maximum value is 5.
value
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:DATa:VALue command.
Description
- This command specifies the binary data string used for ONEWIRe triggering if the trigger condition is DATA.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:DATa:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:DATa:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:DATa:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:DATa:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:DATa:VALue?
Info
Search<x>is the number of the search.<QString>specifies the data value in a valid format. The default size and value for DATA is 8 bits and ‘XXXXXXXX’.
SearchSearchItemTriggerABusOnewireDataSize
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:DATa:SIZe command.
Description
- This command specifies the length of the data string in bytes to be used for ONEWIRe triggering if the trigger condition is DATA. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:DATa:SIZe?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:DATa:SIZe?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:DATa:SIZe valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:DATa:SIZe <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:DATa:SIZe?
Info
Search<x>is the number of the search.<NR1>specifies the data string in a valid format. The minimum and default values are 1. The maximum value is 5.
SearchSearchItemTriggerABusOnewireDataValue
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:DATa:VALue command.
Description
- This command specifies the binary data string used for ONEWIRe triggering if the trigger condition is DATA.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:DATa:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:DATa:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:DATa:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:DATa:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:DATa:VALue?
Info
Search<x>is the number of the search.<QString>specifies the data value in a valid format. The default size and value for DATA is 8 bits and ‘XXXXXXXX’.
SearchSearchItemTriggerABusOnewireMatchrom
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:MATCHROM command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:MATCHROM?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:MATCHROM?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.familycode: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:MATCHROM:FAMILYCODecommand..serialnumber: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:MATCHROM:SERIALNUMBercommand.
familycode
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:MATCHROM:FAMILYCODe command.
Description
- This command sets or queries the family code for Match ROM in ONEWIRE bus. MODe should be set to Standard.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:MATCHROM:FAMILYCODe?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:MATCHROM:FAMILYCODe?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:MATCHROM:FAMILYCODe valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:MATCHROM:FAMILYCODe <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:MATCHROM:FAMILYCODe?
Info
Search<x>is the number of the search.<QString>specifies the binary string used for Family Code triggering. The default size and value of family code for Match ROM is 8 bits and ‘XXXXXXXX’.
serialnumber
property
¶
serialnumber: SearchSearchItemTriggerABusOnewireMatchromSerialnumber
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:MATCHROM:SERIALNUMBer command.
Description
- This command sets or queries the serial number for Match ROM in ONEWIRE bus. MODe should be set to Standard.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:MATCHROM:SERIALNUMBer?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:MATCHROM:SERIALNUMBer?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:MATCHROM:SERIALNUMBer valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:MATCHROM:SERIALNUMBer <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:MATCHROM:SERIALNUMBer?
Info
Search<x>is the number of the search.<QString>specifies the binary string used for Serial Number triggering. The default size and value of serial number for Match ROM is 48 bits and ‘XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX’.
SearchSearchItemTriggerABusOnewireMatchromFamilycode
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:MATCHROM:FAMILYCODe command.
Description
- This command sets or queries the family code for Match ROM in ONEWIRE bus. MODe should be set to Standard.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:MATCHROM:FAMILYCODe?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:MATCHROM:FAMILYCODe?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:MATCHROM:FAMILYCODe valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:MATCHROM:FAMILYCODe <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:MATCHROM:FAMILYCODe?
Info
Search<x>is the number of the search.<QString>specifies the binary string used for Family Code triggering. The default size and value of family code for Match ROM is 8 bits and ‘XXXXXXXX’.
SearchSearchItemTriggerABusOnewireMatchromSerialnumber
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:MATCHROM:SERIALNUMBer command.
Description
- This command sets or queries the serial number for Match ROM in ONEWIRE bus. MODe should be set to Standard.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:MATCHROM:SERIALNUMBer?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:MATCHROM:SERIALNUMBer?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:MATCHROM:SERIALNUMBer valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:MATCHROM:SERIALNUMBer <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:MATCHROM:SERIALNUMBer?
Info
Search<x>is the number of the search.<QString>specifies the binary string used for Serial Number triggering. The default size and value of serial number for Match ROM is 48 bits and ‘XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX’.
SearchSearchItemTriggerABusOnewireOverdrive
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:OVERDRIVe command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:OVERDRIVe?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:OVERDRIVe?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.familycode: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:OVERDRIVe:FAMILYCODecommand..serialnumber: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:OVERDRIVe:SERIALNUMBercommand.
familycode
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:OVERDRIVe:FAMILYCODe command.
Description
- This command sets or queries the Family Code for Overdrive Match ROM in ONEWIRE bus. MODe should be set to Overdrive.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:OVERDRIVe:FAMILYCODe?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:OVERDRIVe:FAMILYCODe?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:OVERDRIVe:FAMILYCODe valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:OVERDRIVe:FAMILYCODe <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:OVERDRIVe:FAMILYCODe?
Info
Search<x>is the number of the search.<QString>specifies the binary string used for Family Code triggering. The default size and value of family code for Overdrive match ROM is 8 bits and ‘XXXXXXXX’.
serialnumber
property
¶
serialnumber: SearchSearchItemTriggerABusOnewireOverdriveSerialnumber
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:OVERDRIVe:SERIALNUMBer command.
Description
- This command sets or queries the serial number for Overdrive Match ROM in ONEWIRE bus. MODe should be set to Overdrive.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:OVERDRIVe:SERIALNUMBer?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:OVERDRIVe:SERIALNUMBer?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:OVERDRIVe:SERIALNUMBer valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:OVERDRIVe:SERIALNUMBer <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:OVERDRIVe:SERIALNUMBer?
Info
Search<x>is the number of the search.<QString>specifies the binary string used for Serial Number triggering. The default size and value of serial number for Overdrive match ROM is 48 bits and ‘XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX’.
SearchSearchItemTriggerABusOnewireOverdriveFamilycode
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:OVERDRIVe:FAMILYCODe command.
Description
- This command sets or queries the Family Code for Overdrive Match ROM in ONEWIRE bus. MODe should be set to Overdrive.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:OVERDRIVe:FAMILYCODe?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:OVERDRIVe:FAMILYCODe?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:OVERDRIVe:FAMILYCODe valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:OVERDRIVe:FAMILYCODe <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:OVERDRIVe:FAMILYCODe?
Info
Search<x>is the number of the search.<QString>specifies the binary string used for Family Code triggering. The default size and value of family code for Overdrive match ROM is 8 bits and ‘XXXXXXXX’.
SearchSearchItemTriggerABusOnewireOverdriveSerialnumber
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:OVERDRIVe:SERIALNUMBer command.
Description
- This command sets or queries the serial number for Overdrive Match ROM in ONEWIRE bus. MODe should be set to Overdrive.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:OVERDRIVe:SERIALNUMBer?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:OVERDRIVe:SERIALNUMBer?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:OVERDRIVe:SERIALNUMBer valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:OVERDRIVe:SERIALNUMBer <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:OVERDRIVe:SERIALNUMBer?
Info
Search<x>is the number of the search.<QString>specifies the binary string used for Serial Number triggering. The default size and value of serial number for Overdrive match ROM is 48 bits and ‘XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX’.
SearchSearchItemTriggerABusOnewireReadrom
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:READROM command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:READROM?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:READROM?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.familycode: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:READROM:FAMILYCODecommand..serialnumber: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:READROM:SERIALNUMBercommand.
familycode
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:READROM:FAMILYCODe command.
Description
- This command sets or queries the family code for Read ROM in ONEWIRE bus. MODe should be set to Standard.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:READROM:FAMILYCODe?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:READROM:FAMILYCODe?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:READROM:FAMILYCODe valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:READROM:FAMILYCODe <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:READROM:FAMILYCODe?
Info
Search<x>is the number of the search.<QString>specifies the binary string used for Family Code triggering. The default size and value of family code for Read ROM is 8 bits and ‘XXXXXXXX’.
serialnumber
property
¶
serialnumber: SearchSearchItemTriggerABusOnewireReadromSerialnumber
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:READROM:SERIALNUMBer command.
Description
- This command sets or queries the serial number for Read ROM in ONEWIRE bus. MODe should be set to Standard.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:READROM:SERIALNUMBer?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:READROM:SERIALNUMBer?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:READROM:SERIALNUMBer valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:READROM:SERIALNUMBer <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:READROM:SERIALNUMBer?
Info
Search<x>is the number of the search.<QString>specifies the binary string used for Serial Number triggering. The default size and value of serial number for Read ROM is 48 bits and ‘XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX’.
SearchSearchItemTriggerABusOnewireReadromFamilycode
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:READROM:FAMILYCODe command.
Description
- This command sets or queries the family code for Read ROM in ONEWIRE bus. MODe should be set to Standard.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:READROM:FAMILYCODe?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:READROM:FAMILYCODe?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:READROM:FAMILYCODe valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:READROM:FAMILYCODe <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:READROM:FAMILYCODe?
Info
Search<x>is the number of the search.<QString>specifies the binary string used for Family Code triggering. The default size and value of family code for Read ROM is 8 bits and ‘XXXXXXXX’.
SearchSearchItemTriggerABusOnewireReadromSerialnumber
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:READROM:SERIALNUMBer command.
Description
- This command sets or queries the serial number for Read ROM in ONEWIRE bus. MODe should be set to Standard.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:READROM:SERIALNUMBer?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:READROM:SERIALNUMBer?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:READROM:SERIALNUMBer valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:READROM:SERIALNUMBer <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:READROM:SERIALNUMBer?
Info
Search<x>is the number of the search.<QString>specifies the binary string used for Serial Number triggering. The default size and value of serial number for Read ROM is 48 bits and ‘XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX’.
SearchSearchItemTriggerABusOnewireSearchrom
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:SEARCHROM command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:SEARCHROM?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:SEARCHROM?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.romcode: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:SEARCHROM:ROMCODecommand.
romcode
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:SEARCHROM:ROMCODe command.
Description
- This command sets or queries the ROM code for Search ROM in ONEWIRE bus. MODe should be set to Standard.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:SEARCHROM:ROMCODe?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:SEARCHROM:ROMCODe?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:SEARCHROM:ROMCODe valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:SEARCHROM:ROMCODe <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:SEARCHROM:ROMCODe?
Info
Search<x>is the number of the search.<QString>specifies the ROM code for Search ROM. The default size and value of ROM code for Search ROM is 64 bits and ‘XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX’.
SearchSearchItemTriggerABusOnewireSearchromRomcode
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:SEARCHROM:ROMCODe command.
Description
- This command sets or queries the ROM code for Search ROM in ONEWIRE bus. MODe should be set to Standard.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:SEARCHROM:ROMCODe?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:SEARCHROM:ROMCODe?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:SEARCHROM:ROMCODe valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:SEARCHROM:ROMCODe <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ONEWIRe:SEARCHROM:ROMCODe?
Info
Search<x>is the number of the search.<QString>specifies the ROM code for Search ROM. The default size and value of ROM code for Search ROM is 64 bits and ‘XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX’.
SearchSearchItemTriggerABusParallel
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:PARallel command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:PARallel?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:PARallel?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.data: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:PARallel:DATacommand tree.
data
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:PARallel:DATa command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:PARallel:DATa?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:PARallel:DATa?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:PARallel:DATa:VALuecommand.
SearchSearchItemTriggerABusParallelData
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:PARallel:DATa command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:PARallel:DATa?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:PARallel:DATa?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:PARallel:DATa:VALuecommand.
value
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:PARallel:DATa:VALue command.
Description
- This command sets or queries the binary data string used for a parallel bus search to determine where to place a mark. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:PARallel:DATa:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:PARallel:DATa:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:PARallel:DATa:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PARallel:DATa:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PARallel:DATa:VALue?
Info
<QString>specifies the data value in a valid format. Valid characters are 0-9.
SearchSearchItemTriggerABusParallelDataValue
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:PARallel:DATa:VALue command.
Description
- This command sets or queries the binary data string used for a parallel bus search to determine where to place a mark. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:PARallel:DATa:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:PARallel:DATa:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:PARallel:DATa:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PARallel:DATa:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PARallel:DATa:VALue?
Info
<QString>specifies the data value in a valid format. Valid characters are 0-9.
SearchSearchItemTriggerABusRs232c
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:RS232C command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:RS232C?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:RS232C?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.condition: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:RS232C:CONDitioncommand..data: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:RS232C:DATacommand tree.
condition
property
¶
condition: SearchSearchItemTriggerABusRs232cCondition
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:RS232C:CONDition command.
Description
- This command sets or queries the condition for an RS232C bus search to determine where to place a mark. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:RS232C:CONDition?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:RS232C:CONDition?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:RS232C:CONDition valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:RS232C:CONDition {DATa|EOp|PARItyerror|STARt}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:RS232C:CONDition?
Info
DATaspecifies the search condition as Data.EOpspecifies the search condition as End of Packet.PARItyerrorspecifies the search condition as Parity Error.STARtspecifies the search condition as Start.
data
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:RS232C:DATa command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:RS232C:DATa?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:RS232C:DATa?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.size: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:RS232C:DATa:SIZecommand..value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:RS232C:DATa:VALuecommand.
SearchSearchItemTriggerABusRs232cCondition
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:RS232C:CONDition command.
Description
- This command sets or queries the condition for an RS232C bus search to determine where to place a mark. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:RS232C:CONDition?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:RS232C:CONDition?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:RS232C:CONDition valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:RS232C:CONDition {DATa|EOp|PARItyerror|STARt}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:RS232C:CONDition?
Info
DATaspecifies the search condition as Data.EOpspecifies the search condition as End of Packet.PARItyerrorspecifies the search condition as Parity Error.STARtspecifies the search condition as Start.
SearchSearchItemTriggerABusRs232cData
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:RS232C:DATa command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:RS232C:DATa?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:RS232C:DATa?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.size: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:RS232C:DATa:SIZecommand..value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:RS232C:DATa:VALuecommand.
size
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:RS232C:DATa:SIZe command.
Description
- This command sets or queries the length of the data string in bytes to be used for an RS232 bus search to determine where to place a mark when the search condition is Data. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:RS232C:DATa:SIZe?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:RS232C:DATa:SIZe?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:RS232C:DATa:SIZe valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:RS232C:DATa:SIZe <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:RS232C:DATa:SIZe?
Info
<NR3>is the number of bits per word in the data string, from 1 to 8.
value
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:RS232C:DATa:VALue command.
Description
- This command sets or queries the data string used for the specified RS232C bus trigger search to determine where to place a mark. The search condition must be Data. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:RS232C:DATa:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:RS232C:DATa:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:RS232C:DATa:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:RS232C:DATa:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:RS232C:DATa:VALue?
Info
<QString>specifies the value of the data string. The valid characters are 0, 1, and X for values in binary format; and A-F, 0-9, and X for values in hexadecimal format.
SearchSearchItemTriggerABusRs232cDataSize
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:RS232C:DATa:SIZe command.
Description
- This command sets or queries the length of the data string in bytes to be used for an RS232 bus search to determine where to place a mark when the search condition is Data. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:RS232C:DATa:SIZe?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:RS232C:DATa:SIZe?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:RS232C:DATa:SIZe valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:RS232C:DATa:SIZe <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:RS232C:DATa:SIZe?
Info
<NR3>is the number of bits per word in the data string, from 1 to 8.
SearchSearchItemTriggerABusRs232cDataValue
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:RS232C:DATa:VALue command.
Description
- This command sets or queries the data string used for the specified RS232C bus trigger search to determine where to place a mark. The search condition must be Data. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:RS232C:DATa:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:RS232C:DATa:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:RS232C:DATa:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:RS232C:DATa:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:RS232C:DATa:VALue?
Info
<QString>specifies the value of the data string. The valid characters are 0, 1, and X for values in binary format; and A-F, 0-9, and X for values in hexadecimal format.
SearchSearchItemTriggerABusS8b10b
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.disparity: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:DISParitycommand..error: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:ERRorcommand..symbol: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:SYMbolcommand tree.
disparity
property
¶
disparity: SearchSearchItemTriggerABusS8b10bDisparity
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:DISParity command.
Description
- This command sets or queries the disparity to be used when searching on a 8B10b signal. The search condition must be set to Symbols > 8-bit.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:DISParity?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:DISParity?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:DISParity valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:DISParity {POSITIVe|NEGAtive|EITHer}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:DISParity?
Info
Search<x>is the Search identifier number.POSITIVespecifies searching for positive disparity.NEGAtivespecifies searching for negative disparity.EITHerspecifies searching for neutral or either positive/negative disparity.
error
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:ERRor command.
Description
- This command sets or queries the error type to be used when searching on a 8B10b signal. The search condition must be set to Errors.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:ERRor?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:ERRor?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:ERRor valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:ERRor {SYMBol|DISParity}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:ERRor?
Info
Search<x>is the Search identifier number.SYMBolspecifies searching for Symbol Errors.DISParityspecifies searching for Disparity Errors.
symbol
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:SYMbol command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:SYMbol?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:SYMbol?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.csymvalue: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:SYMbol:CSYMVALuecommand..ebitvalue: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:SYMbol:EBITVALuecommand..mode: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:SYMbol:MODecommand..tbitrdneg: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:SYMbol:TBITRDNegcommand..tbitrdpos: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:SYMbol:TBITRDPoscommand..tbitvalue: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:SYMbol:TBITVALuecommand..type: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:SYMbol:TYPecommand.
SearchSearchItemTriggerABusS8b10bDisparity
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:DISParity command.
Description
- This command sets or queries the disparity to be used when searching on a 8B10b signal. The search condition must be set to Symbols > 8-bit.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:DISParity?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:DISParity?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:DISParity valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:DISParity {POSITIVe|NEGAtive|EITHer}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:DISParity?
Info
Search<x>is the Search identifier number.POSITIVespecifies searching for positive disparity.NEGAtivespecifies searching for negative disparity.EITHerspecifies searching for neutral or either positive/negative disparity.
SearchSearchItemTriggerABusS8b10bError
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:ERRor command.
Description
- This command sets or queries the error type to be used when searching on a 8B10b signal. The search condition must be set to Errors.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:ERRor?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:ERRor?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:ERRor valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:ERRor {SYMBol|DISParity}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:ERRor?
Info
Search<x>is the Search identifier number.SYMBolspecifies searching for Symbol Errors.DISParityspecifies searching for Disparity Errors.
SearchSearchItemTriggerABusS8b10bSymbol
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:SYMbol command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:SYMbol?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:SYMbol?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.csymvalue: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:SYMbol:CSYMVALuecommand..ebitvalue: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:SYMbol:EBITVALuecommand..mode: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:SYMbol:MODecommand..tbitrdneg: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:SYMbol:TBITRDNegcommand..tbitrdpos: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:SYMbol:TBITRDPoscommand..tbitvalue: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:SYMbol:TBITVALuecommand..type: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:SYMbol:TYPecommand.
csymvalue
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:SYMbol:CSYMVALue command.
Description
- This command sets or queries the control symbol value to be used when searching on 8b10b signal. The default is all X’s (don’t care). The search condition needs to be set to Symbols. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:SYMbol:CSYMVALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:SYMbol:CSYMVALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:SYMbol:CSYMVALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:SYMbol:CSYMVALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:SYMbol:CSYMVALue?
Info
Search<x>is the Search identifier number.<Qstring>specifies the 10 bit value.
ebitvalue
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:SYMbol:EBITVALue command.
Description
- This command specifies the 8 bit value to be used when searching on an 8b10b signal. The default is all X’s (don’t care). The search condition needs to be set to Symbols. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:SYMbol:EBITVALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:SYMbol:EBITVALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:SYMbol:EBITVALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:SYMbol:EBITVALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:SYMbol:EBITVALue?
Info
Search<x>is the Search identifier number.<Qstring>specifies the 8 bit value.
mode
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:SYMbol:MODe command.
Description
- This command sets or queries the mode of data search to be used when searching on 8b10b signal. The search condition must be set to Symbols.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:SYMbol:MODe?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:SYMbol:MODe?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:SYMbol:MODe valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:SYMbol:MODe {EBIT|TBIT|SYMB}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:SYMbol:MODe?
Info
Search<x>is the number of the search.EBITspecifies searching for Eight Bit data.TBITspecifies searching for Ten bit data (6 bits and 4 bits combined). Only valid values are considered.SYMBspecifies searching for symbol data with disparity. Takes only K and D with possible values.
tbitrdneg
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:SYMbol:TBITRDNeg command.
Description
- This command specifies the 10 bit RD negative value to be used when searching on an 8b10b signal. The default is all X’s (don’t care). The search condition needs to be set to Symbols. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:SYMbol:TBITRDNeg?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:SYMbol:TBITRDNeg?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:SYMbol:TBITRDNeg valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:SYMbol:TBITRDNeg <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:SYMbol:TBITRDNeg?
Info
Search<x>is the Search identifier number.<Qstring>specifies the 10 bit RD negative value.
tbitrdpos
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:SYMbol:TBITRDPos command.
Description
- This command specifies the 10 bit RD positive value to be used when searching on an 8b10b signal. The default is all X’s (don’t care). The search condition needs to be set to Symbols. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:SYMbol:TBITRDPos?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:SYMbol:TBITRDPos?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:SYMbol:TBITRDPos valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:SYMbol:TBITRDPos <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:SYMbol:TBITRDPos?
Info
Search<x>is the Search identifier number.<Qstring>specifies the 10 bit RD positive value.
tbitvalue
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:SYMbol:TBITVALue command.
Description
- This command specifies the 10 bit value to be used when searching on an 8b10b signal. The default is all X’s (don’t care). The search condition needs to be set to Symbols. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:SYMbol:TBITVALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:SYMbol:TBITVALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:SYMbol:TBITVALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:SYMbol:TBITVALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:SYMbol:TBITVALue?
Info
Search<x>is the Search identifier number.<Qstring>specifies the 10 bit value.
type
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:SYMbol:TYPe command.
Description
- This command sets or queries the type of symbol when searching on 8b10b signal. The search condition must be set to Symbols.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:SYMbol:TYPe?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:SYMbol:TYPe?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:SYMbol:TYPe valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:SYMbol:TYPe {DATa|CONTrol}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:SYMbol:TYPe?
Info
Search<x>is the number of the search.DATaspecifies searching for Data Symbols.CONTrolspecifies searching for Control Symbols.
SearchSearchItemTriggerABusS8b10bSymbolCsymvalue
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:SYMbol:CSYMVALue command.
Description
- This command sets or queries the control symbol value to be used when searching on 8b10b signal. The default is all X’s (don’t care). The search condition needs to be set to Symbols. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:SYMbol:CSYMVALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:SYMbol:CSYMVALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:SYMbol:CSYMVALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:SYMbol:CSYMVALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:SYMbol:CSYMVALue?
Info
Search<x>is the Search identifier number.<Qstring>specifies the 10 bit value.
SearchSearchItemTriggerABusS8b10bSymbolEbitvalue
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:SYMbol:EBITVALue command.
Description
- This command specifies the 8 bit value to be used when searching on an 8b10b signal. The default is all X’s (don’t care). The search condition needs to be set to Symbols. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:SYMbol:EBITVALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:SYMbol:EBITVALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:SYMbol:EBITVALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:SYMbol:EBITVALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:SYMbol:EBITVALue?
Info
Search<x>is the Search identifier number.<Qstring>specifies the 8 bit value.
SearchSearchItemTriggerABusS8b10bSymbolMode
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:SYMbol:MODe command.
Description
- This command sets or queries the mode of data search to be used when searching on 8b10b signal. The search condition must be set to Symbols.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:SYMbol:MODe?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:SYMbol:MODe?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:SYMbol:MODe valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:SYMbol:MODe {EBIT|TBIT|SYMB}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:SYMbol:MODe?
Info
Search<x>is the number of the search.EBITspecifies searching for Eight Bit data.TBITspecifies searching for Ten bit data (6 bits and 4 bits combined). Only valid values are considered.SYMBspecifies searching for symbol data with disparity. Takes only K and D with possible values.
SearchSearchItemTriggerABusS8b10bSymbolTbitrdneg
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:SYMbol:TBITRDNeg command.
Description
- This command specifies the 10 bit RD negative value to be used when searching on an 8b10b signal. The default is all X’s (don’t care). The search condition needs to be set to Symbols. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:SYMbol:TBITRDNeg?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:SYMbol:TBITRDNeg?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:SYMbol:TBITRDNeg valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:SYMbol:TBITRDNeg <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:SYMbol:TBITRDNeg?
Info
Search<x>is the Search identifier number.<Qstring>specifies the 10 bit RD negative value.
SearchSearchItemTriggerABusS8b10bSymbolTbitrdpos
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:SYMbol:TBITRDPos command.
Description
- This command specifies the 10 bit RD positive value to be used when searching on an 8b10b signal. The default is all X’s (don’t care). The search condition needs to be set to Symbols. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:SYMbol:TBITRDPos?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:SYMbol:TBITRDPos?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:SYMbol:TBITRDPos valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:SYMbol:TBITRDPos <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:SYMbol:TBITRDPos?
Info
Search<x>is the Search identifier number.<Qstring>specifies the 10 bit RD positive value.
SearchSearchItemTriggerABusS8b10bSymbolTbitvalue
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:SYMbol:TBITVALue command.
Description
- This command specifies the 10 bit value to be used when searching on an 8b10b signal. The default is all X’s (don’t care). The search condition needs to be set to Symbols. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:SYMbol:TBITVALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:SYMbol:TBITVALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:SYMbol:TBITVALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:SYMbol:TBITVALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:SYMbol:TBITVALue?
Info
Search<x>is the Search identifier number.<Qstring>specifies the 10 bit value.
SearchSearchItemTriggerABusS8b10bSymbolType
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:SYMbol:TYPe command.
Description
- This command sets or queries the type of symbol when searching on 8b10b signal. The search condition must be set to Symbols.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:SYMbol:TYPe?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:SYMbol:TYPe?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:SYMbol:TYPe valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:SYMbol:TYPe {DATa|CONTrol}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:SYMbol:TYPe?
Info
Search<x>is the number of the search.DATaspecifies searching for Data Symbols.CONTrolspecifies searching for Control Symbols.
SearchSearchItemTriggerABusSdlc
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.address: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:ADDResscommand tree..condition: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:CONDitioncommand..data: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:DATacommand tree..error: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:ERRORcommand tree..frame: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:FRAMecommand tree..staddress: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:STADDresscommand tree..supervisory: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:SUPervisorycommand tree..unnumbered: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:UNNumberedcommand tree.
address
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:ADDRess command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:ADDRess?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:ADDRess?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.type: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:ADDRess:TYPecommand.
condition
property
¶
condition: SearchSearchItemTriggerABusSdlcCondition
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:CONDition command.
Description
- This command sets or queries the trigger condition for a SDLC bus.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:CONDition?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:CONDition?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:CONDition valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:CONDition {STARt|DATa|ABORt|ADDRess|UNNumbered|INFormation|SUPervisory|ERRors|END}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:CONDition?
Info
Search<x>is the number of the search.STARtspecifies start as the field within a SDLC frame to search on. The default Trigger on Condtion is STARt.DATaspecifies data as the field within a SDLC frame to search on.ABORtspecifies abort as the field within a SDLC frame to search on.ADDRessspecifies address as the field within a SDLC frame to search on.UNNumberedspecifies unnumbered as the field within a SDLC frame to search on.INFormationspecifies information as the field within a SDLC frame to search on.SUPervisoryspecifies supervisory as the field within a SDLC frame to search on.ERRorsspecifies errors as the field within a SDLC frame to search on.ENDspecifies end as the field within a SDLC frame to search on.
data
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:DATa command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:DATa?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:DATa?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.size: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:DATa:SIZecommand..value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:DATa:VALuecommand.
error
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:ERROR command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:ERROR?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:ERROR?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.type: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:ERROR:TYPecommand.
frame
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:FRAMe command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:FRAMe?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:FRAMe?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.type: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:FRAMe:TYPecommand.
staddress
property
¶
staddress: SearchSearchItemTriggerABusSdlcStaddress
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:STADDress command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:STADDress?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:STADDress?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:STADDress:VALuecommand.
supervisory
property
¶
supervisory: SearchSearchItemTriggerABusSdlcSupervisory
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:SUPervisory command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:SUPervisory?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:SUPervisory?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.frametype: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:SUPervisory:FRAMETYPecommand.
unnumbered
property
¶
unnumbered: SearchSearchItemTriggerABusSdlcUnnumbered
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:UNNumbered command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:UNNumbered?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:UNNumbered?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.frametype: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:UNNumbered:FRAMETYPecommand.
SearchSearchItemTriggerABusSdlcAddress
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:ADDRess command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:ADDRess?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:ADDRess?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.type: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:ADDRess:TYPecommand.
type
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:ADDRess:TYPe command.
Description
- This commands specifies the Address type in SDLC frame which can be Broadcast, No-Station and Address value can be specified.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:ADDRess:TYPe?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:ADDRess:TYPe?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:ADDRess:TYPe valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:ADDRess:TYPe {BROadcast|NOSTATion|STATIONADDr}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:ADDRess:TYPe?
Info
Search<x>is the number of the search.BROadcastspecifies the Broadcast as the field within a SDLC frame to search on. BROadcast is the default value.NOSTATionspecifies the No-Station as the field within a SDLC frame to search on.STATIONADDrspecifies the Address as the field within a SDLC frame to search on.
SearchSearchItemTriggerABusSdlcAddressType
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:ADDRess:TYPe command.
Description
- This commands specifies the Address type in SDLC frame which can be Broadcast, No-Station and Address value can be specified.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:ADDRess:TYPe?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:ADDRess:TYPe?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:ADDRess:TYPe valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:ADDRess:TYPe {BROadcast|NOSTATion|STATIONADDr}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:ADDRess:TYPe?
Info
Search<x>is the number of the search.BROadcastspecifies the Broadcast as the field within a SDLC frame to search on. BROadcast is the default value.NOSTATionspecifies the No-Station as the field within a SDLC frame to search on.STATIONADDrspecifies the Address as the field within a SDLC frame to search on.
SearchSearchItemTriggerABusSdlcCondition
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:CONDition command.
Description
- This command sets or queries the trigger condition for a SDLC bus.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:CONDition?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:CONDition?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:CONDition valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:CONDition {STARt|DATa|ABORt|ADDRess|UNNumbered|INFormation|SUPervisory|ERRors|END}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:CONDition?
Info
Search<x>is the number of the search.STARtspecifies start as the field within a SDLC frame to search on. The default Trigger on Condtion is STARt.DATaspecifies data as the field within a SDLC frame to search on.ABORtspecifies abort as the field within a SDLC frame to search on.ADDRessspecifies address as the field within a SDLC frame to search on.UNNumberedspecifies unnumbered as the field within a SDLC frame to search on.INFormationspecifies information as the field within a SDLC frame to search on.SUPervisoryspecifies supervisory as the field within a SDLC frame to search on.ERRorsspecifies errors as the field within a SDLC frame to search on.ENDspecifies end as the field within a SDLC frame to search on.
SearchSearchItemTriggerABusSdlcData
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:DATa command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:DATa?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:DATa?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.size: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:DATa:SIZecommand..value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:DATa:VALuecommand.
size
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:DATa:SIZe command.
Description
- This command specifies the length of the data string in bytes to be used for SDLC triggering if the trigger condition is DATA. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:DATa:SIZe?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:DATa:SIZe?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:DATa:SIZe valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:DATa:SIZe <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:DATa:SIZe?
Info
<NR3>is the length of the data string in bytes. The default Data size is 1, otherwise ranges between 1 to 5.
value
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:DATa:VALue command.
Description
- This command specifies the binary data string used for SDLC triggering if the trigger condition is DATA. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:DATa:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:DATa:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:DATa:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:DATa:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:DATa:VALue?
Info
<QString>specifies the value of the data string. The default value is XXXXXXXX .
SearchSearchItemTriggerABusSdlcDataSize
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:DATa:SIZe command.
Description
- This command specifies the length of the data string in bytes to be used for SDLC triggering if the trigger condition is DATA. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:DATa:SIZe?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:DATa:SIZe?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:DATa:SIZe valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:DATa:SIZe <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:DATa:SIZe?
Info
<NR3>is the length of the data string in bytes. The default Data size is 1, otherwise ranges between 1 to 5.
SearchSearchItemTriggerABusSdlcDataValue
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:DATa:VALue command.
Description
- This command specifies the binary data string used for SDLC triggering if the trigger condition is DATA. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:DATa:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:DATa:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:DATa:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:DATa:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:DATa:VALue?
Info
<QString>specifies the value of the data string. The default value is XXXXXXXX .
SearchSearchItemTriggerABusSdlcError
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:ERROR command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:ERROR?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:ERROR?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.type: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:ERROR:TYPecommand.
type
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:ERROR:TYPe command.
Description
- This command sets or queries the Error Type in SDLC bus.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:ERROR:TYPe?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:ERROR:TYPe?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:ERROR:TYPe valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:ERROR:TYPe {FCS|NUMERICORDer}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:ERROR:TYPe?
Info
Search<x>is the number of the search.FCSsets FCS as the Error Type in SDLC bus. The default error type condition is FCS.NUMERICORDersets NUMERICORDer as the Error Type in SDLC bus.
SearchSearchItemTriggerABusSdlcErrorType
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:ERROR:TYPe command.
Description
- This command sets or queries the Error Type in SDLC bus.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:ERROR:TYPe?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:ERROR:TYPe?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:ERROR:TYPe valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:ERROR:TYPe {FCS|NUMERICORDer}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:ERROR:TYPe?
Info
Search<x>is the number of the search.FCSsets FCS as the Error Type in SDLC bus. The default error type condition is FCS.NUMERICORDersets NUMERICORDer as the Error Type in SDLC bus.
SearchSearchItemTriggerABusSdlcFrame
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:FRAMe command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:FRAMe?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:FRAMe?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.type: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:FRAMe:TYPecommand.
type
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:FRAMe:TYPe command.
Description
- This command sets or queries the Frame Type in SDLC bus.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:FRAMe:TYPe?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:FRAMe:TYPe?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:FRAMe:TYPe valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:FRAMe:TYPe {COMMand|RESPonse|BOTH}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:FRAMe:TYPe?
Info
Search<x>is the number of the search.COMMandsets Command as the Frame Type in SDLC bus. The default value of frame type for SDLC Unnumbered frame is Command.RESPonsesets Response as the Frame Type in SDLC bus.BOTHsets both Command and Response as the Frame Type in SDLC bus.
SearchSearchItemTriggerABusSdlcFrameType
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:FRAMe:TYPe command.
Description
- This command sets or queries the Frame Type in SDLC bus.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:FRAMe:TYPe?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:FRAMe:TYPe?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:FRAMe:TYPe valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:FRAMe:TYPe {COMMand|RESPonse|BOTH}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:FRAMe:TYPe?
Info
Search<x>is the number of the search.COMMandsets Command as the Frame Type in SDLC bus. The default value of frame type for SDLC Unnumbered frame is Command.RESPonsesets Response as the Frame Type in SDLC bus.BOTHsets both Command and Response as the Frame Type in SDLC bus.
SearchSearchItemTriggerABusSdlcStaddress
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:STADDress command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:STADDress?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:STADDress?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:STADDress:VALuecommand.
value
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:STADDress:VALue command.
Description
- This command specifies the binary Station Address string used for SDLC triggering if the trigger condition is Address. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:STADDress:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:STADDress:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:STADDress:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:STADDress:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:STADDress:VALue?
Info
<QString>specifies the value of the data string. The default value is XXXXXXXX.
SearchSearchItemTriggerABusSdlcStaddressValue
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:STADDress:VALue command.
Description
- This command specifies the binary Station Address string used for SDLC triggering if the trigger condition is Address. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:STADDress:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:STADDress:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:STADDress:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:STADDress:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:STADDress:VALue?
Info
<QString>specifies the value of the data string. The default value is XXXXXXXX.
SearchSearchItemTriggerABusSdlcSupervisory
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:SUPervisory command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:SUPervisory?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:SUPervisory?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.frametype: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:SUPervisory:FRAMETYPecommand.
frametype
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:SUPervisory:FRAMETYPe command.
Description
- This command sets or queries the Supervisory Frame Type in SDLC bus.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:SUPervisory:FRAMETYPe?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:SUPervisory:FRAMETYPe?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:SUPervisory:FRAMETYPe valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:SUPervisory:FRAMETYPe {RR|RNR|REJ}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:SUPervisory:FRAMETYPe?
Info
Search<x>is the number of the search.RRsets the frame type as RR.RNRsets the frame type as RNR.REJsets the frame type as REJ.
SearchSearchItemTriggerABusSdlcSupervisoryFrametype
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:SUPervisory:FRAMETYPe command.
Description
- This command sets or queries the Supervisory Frame Type in SDLC bus.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:SUPervisory:FRAMETYPe?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:SUPervisory:FRAMETYPe?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:SUPervisory:FRAMETYPe valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:SUPervisory:FRAMETYPe {RR|RNR|REJ}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:SUPervisory:FRAMETYPe?
Info
Search<x>is the number of the search.RRsets the frame type as RR.RNRsets the frame type as RNR.REJsets the frame type as REJ.
SearchSearchItemTriggerABusSdlcUnnumbered
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:UNNumbered command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:UNNumbered?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:UNNumbered?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.frametype: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:UNNumbered:FRAMETYPecommand.
frametype
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:UNNumbered:FRAMETYPe command.
Description
- This command sets or queries the Unnumbered Frame Type in SDLC bus.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:UNNumbered:FRAMETYPe?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:UNNumbered:FRAMETYPe?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:UNNumbered:FRAMETYPe valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:UNNumbered:FRAMETYPe {UP|UI|SNRM|SNRME|REQDISConnect|UACK|REQSETINIT|DISCMODe|FRAMEREJ|TEST|XID|CONFigure|BEACon}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:UNNumbered:FRAMETYPe?
Info
Search<x>is the number of the search.UPsets the Unnumbered Frame Type as UP.UIsets the Unnumbered Frame Type as UI.SNRMsets the Unnumbered Frame Type as SNRM.SNRMEsets the Unnumbered Frame Type as SNRME.REQDISConnectsets the Unnumbered Frame Type as REQDISConnect.UACKsets the Unnumbered Frame Type as UACK.REQSETINITsets the Unnumbered Frame Type as REQSETINIT.DISCMODesets the Unnumbered Frame Type as DISCMODe.FRAMEREJsets the Unnumbered Frame Type as FRAMEREJ.TESTsets the Unnumbered Frame Type as TEST.XIDsets the Unnumbered Frame Type as XID.CONFiguresets the Unnumbered Frame Type as CONFigure.BEAConsets the Unnumbered Frame Type as BEACon.
SearchSearchItemTriggerABusSdlcUnnumberedFrametype
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:UNNumbered:FRAMETYPe command.
Description
- This command sets or queries the Unnumbered Frame Type in SDLC bus.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:UNNumbered:FRAMETYPe?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:UNNumbered:FRAMETYPe?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:UNNumbered:FRAMETYPe valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:UNNumbered:FRAMETYPe {UP|UI|SNRM|SNRME|REQDISConnect|UACK|REQSETINIT|DISCMODe|FRAMEREJ|TEST|XID|CONFigure|BEACon}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SDLC:UNNumbered:FRAMETYPe?
Info
Search<x>is the number of the search.UPsets the Unnumbered Frame Type as UP.UIsets the Unnumbered Frame Type as UI.SNRMsets the Unnumbered Frame Type as SNRM.SNRMEsets the Unnumbered Frame Type as SNRME.REQDISConnectsets the Unnumbered Frame Type as REQDISConnect.UACKsets the Unnumbered Frame Type as UACK.REQSETINITsets the Unnumbered Frame Type as REQSETINIT.DISCMODesets the Unnumbered Frame Type as DISCMODe.FRAMEREJsets the Unnumbered Frame Type as FRAMEREJ.TESTsets the Unnumbered Frame Type as TEST.XIDsets the Unnumbered Frame Type as XID.CONFiguresets the Unnumbered Frame Type as CONFigure.BEAConsets the Unnumbered Frame Type as BEACon.
SearchSearchItemTriggerABusSent
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SENT?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SENT?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.condition: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:CONDitioncommand..errtype: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:ERRTypecommand..fast: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FASTcommand tree..pause: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:PAUSEcommand tree..slow: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:SLOWcommand tree.
condition
property
¶
condition: SearchSearchItemTriggerABusSentCondition
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:CONDition command.
Description
- This command sets or queries the search condition for a SENT bus.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:CONDition?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:CONDition?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:CONDition valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:CONDition {START|FAST|SLOW|PAUSE|ERRor}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:CONDition?
Info
Search<x>is the number of the search.STARTspecifies searching for start of packet.FASTspecifies searching for fast channel data.SLOWspecifies searching for slow channel data.PAUSEspecifies searching for pause pulses.ERRorspecifies searching on errors.
errtype
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:ERRType command.
Description
- This command sets or queries the error type to be used when searching on SENT data.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:ERRType?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:ERRType?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:ERRType valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:ERRType {FRAMELENgth|CRC}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:ERRType?
Info
Search<x>is the number of the search.FRAMELENgthspecifies searching for SENT frame length errors.CRCspecifies searching for CRC errors.
Sub-properties
.crc: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:ERRType:CRCcommand.
fast
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.chan1a: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN1Acommand tree..chan2b: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN2Bcommand tree..counter: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:COUNTercommand tree..invertnibble: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:INVERTNIBblecommand tree..status: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:STATuscommand tree.
pause
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:PAUSE command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:PAUSE?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:PAUSE?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.qualifier: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:PAUSE:QUALifiercommand..ticks: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:PAUSE:TICKscommand tree.
slow
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:SLOW command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:SLOW?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:SLOW?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.data: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:SLOW:DATAcommand tree..identifier: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:SLOW:IDentifiercommand tree.
SearchSearchItemTriggerABusSentCondition
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:CONDition command.
Description
- This command sets or queries the search condition for a SENT bus.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:CONDition?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:CONDition?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:CONDition valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:CONDition {START|FAST|SLOW|PAUSE|ERRor}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:CONDition?
Info
Search<x>is the number of the search.STARTspecifies searching for start of packet.FASTspecifies searching for fast channel data.SLOWspecifies searching for slow channel data.PAUSEspecifies searching for pause pulses.ERRorspecifies searching on errors.
SearchSearchItemTriggerABusSentErrtype
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:ERRType command.
Description
- This command sets or queries the error type to be used when searching on SENT data.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:ERRType?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:ERRType?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:ERRType valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:ERRType {FRAMELENgth|CRC}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:ERRType?
Info
Search<x>is the number of the search.FRAMELENgthspecifies searching for SENT frame length errors.CRCspecifies searching for CRC errors.
Properties
.crc: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:ERRType:CRCcommand.
crc
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:ERRType:CRC command.
Description
- This command sets or queries the CRC error type to be used when searching on SENT data.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:ERRType:CRC?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:ERRType:CRC?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:ERRType:CRC valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:ERRType:CRC {FAST|SLOW}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:ERRType:CRC?
Info
Search<x>is the number of the search.FASTspecifies searching for CRC errors only in the fast channel.SLOWspecifies searching for CRC errors only in the slow channel.
SearchSearchItemTriggerABusSentErrtypeCrc
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:ERRType:CRC command.
Description
- This command sets or queries the CRC error type to be used when searching on SENT data.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:ERRType:CRC?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:ERRType:CRC?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:ERRType:CRC valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:ERRType:CRC {FAST|SLOW}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:ERRType:CRC?
Info
Search<x>is the number of the search.FASTspecifies searching for CRC errors only in the fast channel.SLOWspecifies searching for CRC errors only in the slow channel.
SearchSearchItemTriggerABusSentFast
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.chan1a: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN1Acommand tree..chan2b: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN2Bcommand tree..counter: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:COUNTercommand tree..invertnibble: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:INVERTNIBblecommand tree..status: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:STATuscommand tree.
chan1a
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN1A command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN1A?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN1A?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.hivalue: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN1A:HIVALuecommand..qualifier: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN1A:QUALifiercommand..value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN1A:VALuecommand.
chan2b
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN2B command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN2B?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN2B?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.hivalue: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN2B:HIVALuecommand..qualifier: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN2B:QUALifiercommand..value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN2B:VALuecommand.
counter
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:COUNTer command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:COUNTer?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:COUNTer?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.hivalue: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:COUNTer:HIVALuecommand..qualifier: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:COUNTer:QUALifiercommand..value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:COUNTer:VALuecommand.
invertnibble
property
¶
invertnibble: SearchSearchItemTriggerABusSentFastInvertnibble
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:INVERTNIBble command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:INVERTNIBble?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:INVERTNIBble?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:INVERTNIBble:VALuecommand.
status
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:STATus command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:STATus?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:STATus?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:STATus:VALuecommand.
SearchSearchItemTriggerABusSentFastChan1a
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN1A command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN1A?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN1A?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.hivalue: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN1A:HIVALuecommand..qualifier: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN1A:QUALifiercommand..value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN1A:VALuecommand.
hivalue
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN1A:HIVALue command.
Description
- This command sets or queries the high binary fast channel 1 value to use when searching on a SENT bus signal.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN1A:HIVALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN1A:HIVALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN1A:HIVALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN1A:HIVALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN1A:HIVALue?
Info
Search<x>is the Search identifier number.<Qstring>sets the Fast Channel 1 binary data high value.
qualifier
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN1A:QUALifier command.
Description
- This command sets or queries the qualifier to be used when searching on SENT fast packet bus data for device channel 1.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN1A:QUALifier?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN1A:QUALifier?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN1A:QUALifier valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN1A:QUALifier {EQual|UNEQual|LESSthan|MOREthan|LESSEQual|MOREEQual|INrange|OUTrange}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN1A:QUALifier?
Info
Search<x>is the number of the search.EQUalspecifies the qualifier as Equal.LESSEQualspecifies the qualifier as Less Than or Equal to.LESSThanspecifies the qualifier as Less Than.MOREEQualspecifies the qualifier as More Than or Equal to.MOREThanspecifies the qualifier as More Than.UNEQualspecifies the qualifier as Unequal.INrangesets the qualifier to inside a range.OUTrangesets the qualifier to outside a range.
value
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN1A:VALue command.
Description
- This command sets or queries the binary fast channel 1 value to be used when searching on a SENT bus signal.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN1A:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN1A:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN1A:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN1A:VALue <Qstring>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN1A:VALue?
Info
Search<x>is the number of the search.<Qstring>is the Fast Channel 1 binary value.
SearchSearchItemTriggerABusSentFastChan1aHivalue
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN1A:HIVALue command.
Description
- This command sets or queries the high binary fast channel 1 value to use when searching on a SENT bus signal.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN1A:HIVALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN1A:HIVALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN1A:HIVALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN1A:HIVALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN1A:HIVALue?
Info
Search<x>is the Search identifier number.<Qstring>sets the Fast Channel 1 binary data high value.
SearchSearchItemTriggerABusSentFastChan1aQualifier
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN1A:QUALifier command.
Description
- This command sets or queries the qualifier to be used when searching on SENT fast packet bus data for device channel 1.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN1A:QUALifier?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN1A:QUALifier?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN1A:QUALifier valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN1A:QUALifier {EQual|UNEQual|LESSthan|MOREthan|LESSEQual|MOREEQual|INrange|OUTrange}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN1A:QUALifier?
Info
Search<x>is the number of the search.EQUalspecifies the qualifier as Equal.LESSEQualspecifies the qualifier as Less Than or Equal to.LESSThanspecifies the qualifier as Less Than.MOREEQualspecifies the qualifier as More Than or Equal to.MOREThanspecifies the qualifier as More Than.UNEQualspecifies the qualifier as Unequal.INrangesets the qualifier to inside a range.OUTrangesets the qualifier to outside a range.
SearchSearchItemTriggerABusSentFastChan1aValue
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN1A:VALue command.
Description
- This command sets or queries the binary fast channel 1 value to be used when searching on a SENT bus signal.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN1A:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN1A:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN1A:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN1A:VALue <Qstring>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN1A:VALue?
Info
Search<x>is the number of the search.<Qstring>is the Fast Channel 1 binary value.
SearchSearchItemTriggerABusSentFastChan2b
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN2B command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN2B?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN2B?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.hivalue: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN2B:HIVALuecommand..qualifier: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN2B:QUALifiercommand..value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN2B:VALuecommand.
hivalue
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN2B:HIVALue command.
Description
- This command sets or queries the high binary fast channel 2 value to use when searching on a SENT bus signal.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN2B:HIVALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN2B:HIVALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN2B:HIVALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN2B:HIVALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN2B:HIVALue?
Info
Search<x>is the Search identifier number.<Qstring>sets the Fast Channel 2 high binary data value.
qualifier
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN2B:QUALifier command.
Description
- This command sets or queries the qualifier to be used when searching on SENT fast packet bus data for device channel 2.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN2B:QUALifier?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN2B:QUALifier?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN2B:QUALifier valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN2B:QUALifier {EQual|UNEQual|LESSthan|MOREthan|LESSEQual|MOREEQual|INrange|OUTrange}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN2B:QUALifier?
Info
Search<x>is the number of the search.EQUalspecifies the qualifier as Equal.LESSEQualspecifies the qualifier as Less Than or Equal to.LESSThanspecifies the qualifier as Less Than.MOREEQualspecifies the qualifier as More Than or Equal to.MOREThanspecifies the qualifier as More Than.UNEQualspecifies the qualifier as Unequal.INrangesets the qualifier to inside a range.OUTrangesets the qualifier to outside a range.
value
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN2B:VALue command.
Description
- This command sets or queries the binary fast channel 2 value to be used when searching on a SENT bus signal.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN2B:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN2B:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN2B:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN2B:VALue <Qstring>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN2B:VALue?
Info
Search<x>is the number of the search.<Qstring>is the Fast Channel 2 binary value.
SearchSearchItemTriggerABusSentFastChan2bHivalue
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN2B:HIVALue command.
Description
- This command sets or queries the high binary fast channel 2 value to use when searching on a SENT bus signal.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN2B:HIVALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN2B:HIVALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN2B:HIVALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN2B:HIVALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN2B:HIVALue?
Info
Search<x>is the Search identifier number.<Qstring>sets the Fast Channel 2 high binary data value.
SearchSearchItemTriggerABusSentFastChan2bQualifier
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN2B:QUALifier command.
Description
- This command sets or queries the qualifier to be used when searching on SENT fast packet bus data for device channel 2.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN2B:QUALifier?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN2B:QUALifier?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN2B:QUALifier valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN2B:QUALifier {EQual|UNEQual|LESSthan|MOREthan|LESSEQual|MOREEQual|INrange|OUTrange}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN2B:QUALifier?
Info
Search<x>is the number of the search.EQUalspecifies the qualifier as Equal.LESSEQualspecifies the qualifier as Less Than or Equal to.LESSThanspecifies the qualifier as Less Than.MOREEQualspecifies the qualifier as More Than or Equal to.MOREThanspecifies the qualifier as More Than.UNEQualspecifies the qualifier as Unequal.INrangesets the qualifier to inside a range.OUTrangesets the qualifier to outside a range.
SearchSearchItemTriggerABusSentFastChan2bValue
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN2B:VALue command.
Description
- This command sets or queries the binary fast channel 2 value to be used when searching on a SENT bus signal.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN2B:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN2B:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN2B:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN2B:VALue <Qstring>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:CHAN2B:VALue?
Info
Search<x>is the number of the search.<Qstring>is the Fast Channel 2 binary value.
SearchSearchItemTriggerABusSentFastCounter
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:COUNTer command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:COUNTer?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:COUNTer?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.hivalue: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:COUNTer:HIVALuecommand..qualifier: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:COUNTer:QUALifiercommand..value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:COUNTer:VALuecommand.
hivalue
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:COUNTer:HIVALue command.
Description
- This command sets or queries the high binary fast message counter value to use when searching on a SENT bus signal.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:COUNTer:HIVALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:COUNTer:HIVALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:COUNTer:HIVALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:COUNTer:HIVALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:COUNTer:HIVALue?
Info
Search<x>is the Search identifier number.<Qstring>sets the Fast Channel 1 counter binary value.
qualifier
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:COUNTer:QUALifier command.
Description
- This command sets or queries the qualifier to be used when searching on SENT fast packet bus data for the secure format counter.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:COUNTer:QUALifier?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:COUNTer:QUALifier?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:COUNTer:QUALifier valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:COUNTer:QUALifier {EQual|UNEQual|LESSthan|MOREthan|LESSEQual|MOREEQual|INrange|OUTrange}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:COUNTer:QUALifier?
Info
Search<x>is the number of the search.EQUalspecifies the qualifier as Equal.LESSEQualspecifies the qualifier as Less Than or Equal to.LESSThanspecifies the qualifier as Less Than.MOREEQualspecifies the qualifier as More Than or Equal to.MOREThanspecifies the qualifier as More Than.UNEQualspecifies the qualifier as Unequal.INrangesets the qualifier to inside a range.OUTrangesets the qualifier to outside a range.
value
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:COUNTer:VALue command.
Description
- This command sets or queries the binary fast message counter value to be used when searching on a SENT bus signal.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:COUNTer:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:COUNTer:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:COUNTer:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:COUNTer:VALue <Qstring>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:COUNTer:VALue?
Info
Search<x>is the number of the search.<Qstring>is the Fast Channel 1 counter value.
SearchSearchItemTriggerABusSentFastCounterHivalue
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:COUNTer:HIVALue command.
Description
- This command sets or queries the high binary fast message counter value to use when searching on a SENT bus signal.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:COUNTer:HIVALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:COUNTer:HIVALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:COUNTer:HIVALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:COUNTer:HIVALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:COUNTer:HIVALue?
Info
Search<x>is the Search identifier number.<Qstring>sets the Fast Channel 1 counter binary value.
SearchSearchItemTriggerABusSentFastCounterQualifier
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:COUNTer:QUALifier command.
Description
- This command sets or queries the qualifier to be used when searching on SENT fast packet bus data for the secure format counter.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:COUNTer:QUALifier?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:COUNTer:QUALifier?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:COUNTer:QUALifier valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:COUNTer:QUALifier {EQual|UNEQual|LESSthan|MOREthan|LESSEQual|MOREEQual|INrange|OUTrange}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:COUNTer:QUALifier?
Info
Search<x>is the number of the search.EQUalspecifies the qualifier as Equal.LESSEQualspecifies the qualifier as Less Than or Equal to.LESSThanspecifies the qualifier as Less Than.MOREEQualspecifies the qualifier as More Than or Equal to.MOREThanspecifies the qualifier as More Than.UNEQualspecifies the qualifier as Unequal.INrangesets the qualifier to inside a range.OUTrangesets the qualifier to outside a range.
SearchSearchItemTriggerABusSentFastCounterValue
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:COUNTer:VALue command.
Description
- This command sets or queries the binary fast message counter value to be used when searching on a SENT bus signal.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:COUNTer:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:COUNTer:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:COUNTer:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:COUNTer:VALue <Qstring>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:COUNTer:VALue?
Info
Search<x>is the number of the search.<Qstring>is the Fast Channel 1 counter value.
SearchSearchItemTriggerABusSentFastInvertnibble
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:INVERTNIBble command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:INVERTNIBble?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:INVERTNIBble?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:INVERTNIBble:VALuecommand.
value
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:INVERTNIBble:VALue command.
Description
- This command sets or queries the binary fast message inverted nibble value to be used when searching on a SENT bus signal.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:INVERTNIBble:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:INVERTNIBble:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:INVERTNIBble:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:INVERTNIBble:VALue <Qstring>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:INVERTNIBble:VALue?
Info
Search<x>is the number of the search.<Qstring>is the fast message inverted nibble binary value.
SearchSearchItemTriggerABusSentFastInvertnibbleValue
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:INVERTNIBble:VALue command.
Description
- This command sets or queries the binary fast message inverted nibble value to be used when searching on a SENT bus signal.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:INVERTNIBble:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:INVERTNIBble:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:INVERTNIBble:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:INVERTNIBble:VALue <Qstring>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:INVERTNIBble:VALue?
Info
Search<x>is the number of the search.<Qstring>is the fast message inverted nibble binary value.
SearchSearchItemTriggerABusSentFastStatus
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:STATus command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:STATus?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:STATus?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:STATus:VALuecommand.
value
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:STATus:VALue command.
Description
- This command sets or queries the binary status value to be used when searching on a SENT bus signal.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:STATus:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:STATus:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:STATus:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:STATus:VALue <Qstring>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:STATus:VALue?
Info
Search<x>is the number of the search.<Qstring>is the binary status binary value.
SearchSearchItemTriggerABusSentFastStatusValue
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:STATus:VALue command.
Description
- This command sets or queries the binary status value to be used when searching on a SENT bus signal.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:STATus:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:STATus:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:STATus:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:STATus:VALue <Qstring>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:FAST:STATus:VALue?
Info
Search<x>is the number of the search.<Qstring>is the binary status binary value.
SearchSearchItemTriggerABusSentPause
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:PAUSE command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:PAUSE?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:PAUSE?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.qualifier: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:PAUSE:QUALifiercommand..ticks: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:PAUSE:TICKscommand tree.
qualifier
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:PAUSE:QUALifier command.
Description
- This command sets or queries the qualifier to be used when searching on SENT pause pulses.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:PAUSE:QUALifier?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:PAUSE:QUALifier?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:PAUSE:QUALifier valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:PAUSE:QUALifier {EQual|UNEQual|LESSthan|MOREthan|LESSEQual|MOREEQual|INrange|OUTrange}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:PAUSE:QUALifier?
Info
Search<x>is the number of the search.EQUalspecifies the qualifier as Equal.INrangesets the qualifier to be within a range.LESSEQualsets the qualifier as Less Than or Equal to.LESSThansets the qualifier as Less Than.MOREEQualsets the qualifier as More Than or Equal to.MOREThansets the qualifier as More Than.OUTrangesets the qualifier to be outside a range.UNEQualspecifies the qualifier as Unequal.
ticks
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:PAUSE:TICKs command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:PAUSE:TICKs?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:PAUSE:TICKs?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.hivalue: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:PAUSE:TICKs:HIVALuecommand..value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:PAUSE:TICKs:VALuecommand.
SearchSearchItemTriggerABusSentPauseQualifier
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:PAUSE:QUALifier command.
Description
- This command sets or queries the qualifier to be used when searching on SENT pause pulses.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:PAUSE:QUALifier?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:PAUSE:QUALifier?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:PAUSE:QUALifier valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:PAUSE:QUALifier {EQual|UNEQual|LESSthan|MOREthan|LESSEQual|MOREEQual|INrange|OUTrange}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:PAUSE:QUALifier?
Info
Search<x>is the number of the search.EQUalspecifies the qualifier as Equal.INrangesets the qualifier to be within a range.LESSEQualsets the qualifier as Less Than or Equal to.LESSThansets the qualifier as Less Than.MOREEQualsets the qualifier as More Than or Equal to.MOREThansets the qualifier as More Than.OUTrangesets the qualifier to be outside a range.UNEQualspecifies the qualifier as Unequal.
SearchSearchItemTriggerABusSentPauseTicks
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:PAUSE:TICKs command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:PAUSE:TICKs?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:PAUSE:TICKs?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.hivalue: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:PAUSE:TICKs:HIVALuecommand..value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:PAUSE:TICKs:VALuecommand.
hivalue
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:PAUSE:TICKs:HIVALue command.
Description
- This command sets or queries the maximum number of pause clock ticks to be used when searching on a SENT bus signal.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:PAUSE:TICKs:HIVALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:PAUSE:TICKs:HIVALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:PAUSE:TICKs:HIVALuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:PAUSE:TICKs:HIVALue
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:PAUSE:TICKs:HIVALue?
Info
Search<x>is the number of the search.<NR1>is the maximum number of pause clock ticks to be used when searching.
value
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:PAUSE:TICKs:VALue command.
Description
- This command sets or queries the minimum number of pause clock ticks to be used when searching on a SENT bus signal.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:PAUSE:TICKs:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:PAUSE:TICKs:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:PAUSE:TICKs:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:PAUSE:TICKs:VALue <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:PAUSE:TICKs:VALue?
Info
Search<x>is the number of the search.<NR1>is the minimum number of pause clock ticks to be used when searching.
SearchSearchItemTriggerABusSentPauseTicksHivalue
¶
Bases: SCPICmdWriteNoArguments, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:PAUSE:TICKs:HIVALue command.
Description
- This command sets or queries the maximum number of pause clock ticks to be used when searching on a SENT bus signal.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:PAUSE:TICKs:HIVALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:PAUSE:TICKs:HIVALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:PAUSE:TICKs:HIVALuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:PAUSE:TICKs:HIVALue
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:PAUSE:TICKs:HIVALue?
Info
Search<x>is the number of the search.<NR1>is the maximum number of pause clock ticks to be used when searching.
SearchSearchItemTriggerABusSentPauseTicksValue
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:PAUSE:TICKs:VALue command.
Description
- This command sets or queries the minimum number of pause clock ticks to be used when searching on a SENT bus signal.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:PAUSE:TICKs:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:PAUSE:TICKs:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:PAUSE:TICKs:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:PAUSE:TICKs:VALue <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:PAUSE:TICKs:VALue?
Info
Search<x>is the number of the search.<NR1>is the minimum number of pause clock ticks to be used when searching.
SearchSearchItemTriggerABusSentSlow
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:SLOW command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:SLOW?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:SLOW?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.data: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:SLOW:DATAcommand tree..identifier: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:SLOW:IDentifiercommand tree.
data
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:SLOW:DATA command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:SLOW:DATA?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:SLOW:DATA?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.hivalue: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:SLOW:DATA:HIVALuecommand..qualifier: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:SLOW:DATA:QUALifiercommand..value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:SLOW:DATA:VALuecommand.
identifier
property
¶
identifier: SearchSearchItemTriggerABusSentSlowIdentifier
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:SLOW:IDentifier command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:SLOW:IDentifier?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:SLOW:IDentifier?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:SLOW:IDentifier:VALuecommand.
SearchSearchItemTriggerABusSentSlowData
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:SLOW:DATA command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:SLOW:DATA?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:SLOW:DATA?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.hivalue: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:SLOW:DATA:HIVALuecommand..qualifier: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:SLOW:DATA:QUALifiercommand..value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:SLOW:DATA:VALuecommand.
hivalue
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:SLOW:DATA:HIVALue command.
Description
- This command sets or queries the high binary Slow channel data value to use when searching on a SENT bus signal.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:SLOW:DATA:HIVALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:SLOW:DATA:HIVALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:SLOW:DATA:HIVALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:SLOW:DATA:HIVALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:SLOW:DATA:HIVALue?
Info
Search<x>is the Search identifier number.<Qstring>sets the binary Slow channel data value.
qualifier
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:SLOW:DATA:QUALifier command.
Description
- This command sets or queries the qualifier to be used when searching on SENT slow packet bus data.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:SLOW:DATA:QUALifier?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:SLOW:DATA:QUALifier?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:SLOW:DATA:QUALifier valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:SLOW:DATA:QUALifier {EQual|UNEQual|LESSthan|MOREthan|LESSEQual|MOREEQualINrange|OUTrange}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:SLOW:DATA:QUALifier?
Info
Search<x>is the number of the search.EQUalspecifies the qualifier as Equal.LESSEQualsets the qualifier as Less Than or Equal to.LESSThansets the qualifier as Less Than.MOREEQualsets the qualifier as More Than or Equal to.MOREThansets the qualifier as More Than.UNEQualspecifies the qualifier as Unequal.INrangesets the search qualifier to inside a range.OUTrangesets the search qualifier to outside a range.
value
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:SLOW:DATA:VALue command.
Description
- This command sets or queries the binary slow channel data value to be used when searching on a SENT bus signal.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:SLOW:DATA:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:SLOW:DATA:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:SLOW:DATA:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:SLOW:DATA:VALue <Qstring>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:SLOW:DATA:VALue?
Info
Search<x>is the number of the search.<Qstring>is the slow channel data binary value.
SearchSearchItemTriggerABusSentSlowDataHivalue
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:SLOW:DATA:HIVALue command.
Description
- This command sets or queries the high binary Slow channel data value to use when searching on a SENT bus signal.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:SLOW:DATA:HIVALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:SLOW:DATA:HIVALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:SLOW:DATA:HIVALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:SLOW:DATA:HIVALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:SLOW:DATA:HIVALue?
Info
Search<x>is the Search identifier number.<Qstring>sets the binary Slow channel data value.
SearchSearchItemTriggerABusSentSlowDataQualifier
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:SLOW:DATA:QUALifier command.
Description
- This command sets or queries the qualifier to be used when searching on SENT slow packet bus data.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:SLOW:DATA:QUALifier?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:SLOW:DATA:QUALifier?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:SLOW:DATA:QUALifier valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:SLOW:DATA:QUALifier {EQual|UNEQual|LESSthan|MOREthan|LESSEQual|MOREEQualINrange|OUTrange}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:SLOW:DATA:QUALifier?
Info
Search<x>is the number of the search.EQUalspecifies the qualifier as Equal.LESSEQualsets the qualifier as Less Than or Equal to.LESSThansets the qualifier as Less Than.MOREEQualsets the qualifier as More Than or Equal to.MOREThansets the qualifier as More Than.UNEQualspecifies the qualifier as Unequal.INrangesets the search qualifier to inside a range.OUTrangesets the search qualifier to outside a range.
SearchSearchItemTriggerABusSentSlowDataValue
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:SLOW:DATA:VALue command.
Description
- This command sets or queries the binary slow channel data value to be used when searching on a SENT bus signal.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:SLOW:DATA:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:SLOW:DATA:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:SLOW:DATA:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:SLOW:DATA:VALue <Qstring>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:SLOW:DATA:VALue?
Info
Search<x>is the number of the search.<Qstring>is the slow channel data binary value.
SearchSearchItemTriggerABusSentSlowIdentifier
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:SLOW:IDentifier command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:SLOW:IDentifier?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:SLOW:IDentifier?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:SLOW:IDentifier:VALuecommand.
value
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:SLOW:IDentifier:VALue command.
Description
- This command sets or queries the binary slow identifier value to be used when searching on a SENT bus signal.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:SLOW:IDentifier:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:SLOW:IDentifier:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:SLOW:IDentifier:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:SLOW:IDentifier:VALue <Qstring>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:SLOW:IDentifier:VALue?
Info
Search<x>is the number of the search.<Qstring>is the slow channel identifier binary value.
SearchSearchItemTriggerABusSentSlowIdentifierValue
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:SLOW:IDentifier:VALue command.
Description
- This command sets or queries the binary slow identifier value to be used when searching on a SENT bus signal.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:SLOW:IDentifier:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:SLOW:IDentifier:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:SLOW:IDentifier:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:SLOW:IDentifier:VALue <Qstring>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SENT:SLOW:IDentifier:VALue?
Info
Search<x>is the number of the search.<Qstring>is the slow channel identifier binary value.
SearchSearchItemTriggerABusSmbus
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.address: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:ADDResscommand tree..command: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:COMMandcommand tree..condition: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:CONDitioncommand..data: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:DATacommand tree..deviceaddr: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:DEVICEADDRcommand tree..error: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:ERROrcommand tree..fieldbyte: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:FIELDBYTecommand..udiddata: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:UDIDDATacommand tree.
address
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:ADDRess command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:ADDRess?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:ADDRess?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:ADDRess:VALuecommand.
command
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:COMMand command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:COMMand?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:COMMand?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:COMMand:VALuecommand.
condition
property
¶
condition: SearchSearchItemTriggerABusSmbusCondition
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:CONDition command.
Description
- This command sets or queries the trigger condition for a SMBUS bus.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:CONDition?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:CONDition?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:CONDition valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:CONDition {STARt|REPEATSTARt|ADDRess|HOSTADDR|DEVICEADDR|COMMand|DATa|UDIDDATa|ERRor|STOP|IDLe}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:CONDition?
Info
Search<x>is the search number.STARtsets the search condition to start. This is the default value.REPEATSTARtsets the search condition to repeat start.ADDResssets the search condition to address.HOSTADDRsets the search condition to host address.DEVICEADDRsets the search condition to device address.COMMandsets the search condition to command.DATasets the search condition to data.UDIDDATasets the search condition to UDID data.ERRorsets the search condition to error.STOPsets the search condition to stop.IDLesets the search condition to idle.
data
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:DATa command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:DATa?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:DATa?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.size: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:DATa:SIZecommand..value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:DATa:VALuecommand.
deviceaddr
property
¶
deviceaddr: SearchSearchItemTriggerABusSmbusDeviceaddr
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:DEVICEADDR command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:DEVICEADDR?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:DEVICEADDR?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:DEVICEADDR:VALuecommand.
error
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:ERROr command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:ERROr?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:ERROr?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.type: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:ERROr:TYPecommand.
fieldbyte
property
¶
fieldbyte: SearchSearchItemTriggerABusSmbusFieldbyte
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:FIELDBYTe command.
Description
- This command sets or queries the field byte for a SMBUS bus if trigger condition is UDID data.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:FIELDBYTe?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:FIELDBYTe?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:FIELDBYTe valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:FIELDBYTe {ONE|TWO|FOUR}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:FIELDBYTe?
Info
Search<x>is the search number.ONEsets the field byte size to 8 bits. This is the default value.TWOsets the field byte size to 16 bits.FOURsets the field byte size to 32 bits.
udiddata
property
¶
udiddata: SearchSearchItemTriggerABusSmbusUdiddata
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:UDIDDATa command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:UDIDDATa?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:UDIDDATa?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:UDIDDATa:VALuecommand.
SearchSearchItemTriggerABusSmbusAddress
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:ADDRess command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:ADDRess?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:ADDRess?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:ADDRess:VALuecommand.
value
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:ADDRess:VALue command.
Description
- This command specifies the binary physical address string used for SMBUS triggering if the trigger condition is address.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:ADDRess:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:ADDRess:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:ADDRess:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:ADDRess:VALue <Qstring>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:ADDRess:VALue?
Info
Search<x>is the search identifier number.<Qstring>specifies the address value as the field within a SMBUS frame to search on. The default value is XXXXXXX.
SearchSearchItemTriggerABusSmbusAddressValue
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:ADDRess:VALue command.
Description
- This command specifies the binary physical address string used for SMBUS triggering if the trigger condition is address.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:ADDRess:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:ADDRess:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:ADDRess:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:ADDRess:VALue <Qstring>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:ADDRess:VALue?
Info
Search<x>is the search identifier number.<Qstring>specifies the address value as the field within a SMBUS frame to search on. The default value is XXXXXXX.
SearchSearchItemTriggerABusSmbusCommand
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:COMMand command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:COMMand?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:COMMand?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:COMMand:VALuecommand.
value
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:COMMand:VALue command.
Description
- This command specifies the binary command code string used for SMBUS triggering if the trigger condition is command code.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:COMMand:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:COMMand:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:COMMand:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:COMMand:VALue <Qstring>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:COMMand:VALue?
Info
Search<x>is the search identifier number.<Qstring>specifies the command value as the field within a SMBUS frame to search on. The default value is XXXXXXX.
SearchSearchItemTriggerABusSmbusCommandValue
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:COMMand:VALue command.
Description
- This command specifies the binary command code string used for SMBUS triggering if the trigger condition is command code.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:COMMand:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:COMMand:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:COMMand:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:COMMand:VALue <Qstring>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:COMMand:VALue?
Info
Search<x>is the search identifier number.<Qstring>specifies the command value as the field within a SMBUS frame to search on. The default value is XXXXXXX.
SearchSearchItemTriggerABusSmbusCondition
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:CONDition command.
Description
- This command sets or queries the trigger condition for a SMBUS bus.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:CONDition?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:CONDition?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:CONDition valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:CONDition {STARt|REPEATSTARt|ADDRess|HOSTADDR|DEVICEADDR|COMMand|DATa|UDIDDATa|ERRor|STOP|IDLe}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:CONDition?
Info
Search<x>is the search number.STARtsets the search condition to start. This is the default value.REPEATSTARtsets the search condition to repeat start.ADDResssets the search condition to address.HOSTADDRsets the search condition to host address.DEVICEADDRsets the search condition to device address.COMMandsets the search condition to command.DATasets the search condition to data.UDIDDATasets the search condition to UDID data.ERRorsets the search condition to error.STOPsets the search condition to stop.IDLesets the search condition to idle.
SearchSearchItemTriggerABusSmbusData
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:DATa command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:DATa?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:DATa?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.size: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:DATa:SIZecommand..value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:DATa:VALuecommand.
size
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:DATa:SIZe command.
Description
- This command specifies the length of the data string in bytes to be used for an SMBus trigger if the trigger condition is DATA.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:DATa:SIZe?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:DATa:SIZe?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:DATa:SIZe valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:DATa:SIZe <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:DATa:SIZe?
Info
Search<x>is the search number.NR1sets the data size value. The valid range is 1 to 8. The default data size is 1.
value
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:DATa:VALue command.
Description
- This command specifies the binary data string used for SMBus triggering if the trigger condition is DATA.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:DATa:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:DATa:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:DATa:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:DATa:VALue <Qstring>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:DATa:VALue?
Info
Search<x>is the search identifier number.<Qstring>specifies the data value as the field within a SMBUS frame to search on. The default value is XXXXXXX.
SearchSearchItemTriggerABusSmbusDataSize
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:DATa:SIZe command.
Description
- This command specifies the length of the data string in bytes to be used for an SMBus trigger if the trigger condition is DATA.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:DATa:SIZe?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:DATa:SIZe?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:DATa:SIZe valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:DATa:SIZe <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:DATa:SIZe?
Info
Search<x>is the search number.NR1sets the data size value. The valid range is 1 to 8. The default data size is 1.
SearchSearchItemTriggerABusSmbusDataValue
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:DATa:VALue command.
Description
- This command specifies the binary data string used for SMBus triggering if the trigger condition is DATA.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:DATa:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:DATa:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:DATa:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:DATa:VALue <Qstring>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:DATa:VALue?
Info
Search<x>is the search identifier number.<Qstring>specifies the data value as the field within a SMBUS frame to search on. The default value is XXXXXXX.
SearchSearchItemTriggerABusSmbusDeviceaddr
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:DEVICEADDR command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:DEVICEADDR?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:DEVICEADDR?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:DEVICEADDR:VALuecommand.
value
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:DEVICEADDR:VALue command.
Description
- This command specifies the binary physical address string is used for SMBUS triggering if the trigger condition is device address.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:DEVICEADDR:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:DEVICEADDR:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:DEVICEADDR:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:DEVICEADDR:VALue <Qstring>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:DEVICEADDR:VALue?
Info
Search<x>is the search identifier number.<Qstring>specifies the device address value as the field within a SMBUS frame to search on. The default value is XXXXXXX.
SearchSearchItemTriggerABusSmbusDeviceaddrValue
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:DEVICEADDR:VALue command.
Description
- This command specifies the binary physical address string is used for SMBUS triggering if the trigger condition is device address.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:DEVICEADDR:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:DEVICEADDR:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:DEVICEADDR:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:DEVICEADDR:VALue <Qstring>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:DEVICEADDR:VALue?
Info
Search<x>is the search identifier number.<Qstring>specifies the device address value as the field within a SMBUS frame to search on. The default value is XXXXXXX.
SearchSearchItemTriggerABusSmbusError
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:ERROr command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:ERROr?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:ERROr?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.type: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:ERROr:TYPecommand.
type
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:ERROr:TYPe command.
Description
- This command sets or queries the error type for a SMBus.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:ERROr:TYPe?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:ERROr:TYPe?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:ERROr:TYPe valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:ERROr:TYPe {ANY|ACK|NACK|PEC}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:ERROr:TYPe?
Info
Search<x>is the search number.ANYsets the error search type to ANY. This is the default value.ACKsets the error search type to ACK.NACKsets the error search type to NACK.PECsets the error search type to PEC.
SearchSearchItemTriggerABusSmbusErrorType
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:ERROr:TYPe command.
Description
- This command sets or queries the error type for a SMBus.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:ERROr:TYPe?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:ERROr:TYPe?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:ERROr:TYPe valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:ERROr:TYPe {ANY|ACK|NACK|PEC}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:ERROr:TYPe?
Info
Search<x>is the search number.ANYsets the error search type to ANY. This is the default value.ACKsets the error search type to ACK.NACKsets the error search type to NACK.PECsets the error search type to PEC.
SearchSearchItemTriggerABusSmbusFieldbyte
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:FIELDBYTe command.
Description
- This command sets or queries the field byte for a SMBUS bus if trigger condition is UDID data.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:FIELDBYTe?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:FIELDBYTe?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:FIELDBYTe valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:FIELDBYTe {ONE|TWO|FOUR}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:FIELDBYTe?
Info
Search<x>is the search number.ONEsets the field byte size to 8 bits. This is the default value.TWOsets the field byte size to 16 bits.FOURsets the field byte size to 32 bits.
SearchSearchItemTriggerABusSmbusUdiddata
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:UDIDDATa command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:UDIDDATa?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:UDIDDATa?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:UDIDDATa:VALuecommand.
value
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:UDIDDATa:VALue command.
Description
- This command specifies the binary data string used for SMBUS triggering if the trigger condition is UDID data.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:UDIDDATa:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:UDIDDATa:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:UDIDDATa:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:UDIDDATa:VALue {ONE|TWO|FOUR}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:UDIDDATa:VALue?
Info
Search<x>is the search identifier number.<Qstring>specifies the UDID data value as the field within a SMBUS frame to search on. The default value is XXXXXXXX.
SearchSearchItemTriggerABusSmbusUdiddataValue
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:UDIDDATa:VALue command.
Description
- This command specifies the binary data string used for SMBUS triggering if the trigger condition is UDID data.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:UDIDDATa:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:UDIDDATa:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:UDIDDATa:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:UDIDDATa:VALue {ONE|TWO|FOUR}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SMBUS:UDIDDATa:VALue?
Info
Search<x>is the search identifier number.<Qstring>specifies the UDID data value as the field within a SMBUS frame to search on. The default value is XXXXXXXX.
SearchSearchItemTriggerABusSource
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:SOUrce command.
Description
- This command sets or queries the bus source for the bus search to determine where to place a mark. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SOUrce?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SOUrce?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SOUrce valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SOUrce {B0|B1|B2|B3|B4|B5|B6|B7|B8|B9|B10|B11|B12|B13|B14|B15|B16}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SOUrce?
Info
B<x>specifies the bus source as a bus number from B01 to B16. x has a minimum of 0 and a maximum of 16.
SearchSearchItemTriggerABusSpacewire
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:SPACEWIRe command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SPACEWIRe?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SPACEWIRe?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.condition: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:SPACEWIRe:CONDitioncommand..controlchartype: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:SPACEWIRe:CONTROLCHARTYPecommand..controlcodetype: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:SPACEWIRe:CONTROLCODETYPecommand..data: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:SPACEWIRe:DATacommand tree..errortype: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:SPACEWIRe:ERRORTYPecommand..timecode: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:SPACEWIRe:TIMECodecommand tree.
condition
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:SPACEWIRe:CONDition command.
Description
- This command sets or queries the field or condition for which to search on a SpaceWire bus.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SPACEWIRe:CONDition?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SPACEWIRe:CONDition?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SPACEWIRe:CONDition valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SPACEWIRe:CONDition {SYNC|DATa|ERRors|CONTROLCODe|CONTROLCHAR}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SPACEWIRe:CONDition?
Info
Search<x>is the search number.SYNCsets the search condition to Synchronization.DATasets the search condition to Data Characters.ERRorssets the search condition to SpaceWire Bus Decode Errors.CONTROLCODesets the search condition to control code.CONTROLCHARsets the search condition to control character.
controlchartype
property
¶
controlchartype: SearchSearchItemTriggerABusSpacewireControlchartype
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:SPACEWIRe:CONTROLCHARTYPe command.
Description
- This command sets or queries the control character type to use when searching on a SpaceWire bus signal.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SPACEWIRe:CONTROLCHARTYPe?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SPACEWIRe:CONTROLCHARTYPe?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SPACEWIRe:CONTROLCHARTYPe valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SPACEWIRe:CONTROLCHARTYPe {FCT|ESC|ENDOFPACKet}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SPACEWIRe:CONTROLCHARTYPe?
Info
Search<x>is the search number.FCTsets the control character type to Flow Control Token.ESCsets the control character type to Escape.ENDOFPACKetsets the control character type to End of Packet.
controlcodetype
property
¶
controlcodetype: SearchSearchItemTriggerABusSpacewireControlcodetype
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:SPACEWIRe:CONTROLCODETYPe command.
Description
- This command sets or queries the control code type to use when searching on a SpaceWire bus signal.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SPACEWIRe:CONTROLCODETYPe?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SPACEWIRe:CONTROLCODETYPe?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SPACEWIRe:CONTROLCODETYPe valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SPACEWIRe:CONTROLCODETYPe {NULL|TIMECODe}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SPACEWIRe:CONTROLCODETYPe?
Info
Search<x>is the search number.NULLsets the control code type to Null code.TIMECODesets the control code type to Time code (only varying part of Time code [6 bits] is considered for search).
data
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:SPACEWIRe:DATa command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SPACEWIRe:DATa?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SPACEWIRe:DATa?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.size: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:SPACEWIRe:DATa:SIZecommand..value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:SPACEWIRe:DATa:VALuecommand.
errortype
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:SPACEWIRe:ERRORTYPe command.
Description
- This command sets or queries the error type for which to search on the SpaceWire bus signal.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SPACEWIRe:ERRORTYPe?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SPACEWIRe:ERRORTYPe?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SPACEWIRe:ERRORTYPe valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SPACEWIRe:ERRORTYPe {EEP|ESC|PARity}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SPACEWIRe:ERRORTYPe?
Info
Search<x>is the search number.EEPsets the error search type to Error end of packet.ESCsets the error search type to Escape error.PARitysets the error search type to Parity error.
timecode
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:SPACEWIRe:TIMECode command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SPACEWIRe:TIMECode?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SPACEWIRe:TIMECode?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:SPACEWIRe:TIMECode:VALuecommand.
SearchSearchItemTriggerABusSpacewireCondition
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:SPACEWIRe:CONDition command.
Description
- This command sets or queries the field or condition for which to search on a SpaceWire bus.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SPACEWIRe:CONDition?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SPACEWIRe:CONDition?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SPACEWIRe:CONDition valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SPACEWIRe:CONDition {SYNC|DATa|ERRors|CONTROLCODe|CONTROLCHAR}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SPACEWIRe:CONDition?
Info
Search<x>is the search number.SYNCsets the search condition to Synchronization.DATasets the search condition to Data Characters.ERRorssets the search condition to SpaceWire Bus Decode Errors.CONTROLCODesets the search condition to control code.CONTROLCHARsets the search condition to control character.
SearchSearchItemTriggerABusSpacewireControlchartype
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:SPACEWIRe:CONTROLCHARTYPe command.
Description
- This command sets or queries the control character type to use when searching on a SpaceWire bus signal.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SPACEWIRe:CONTROLCHARTYPe?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SPACEWIRe:CONTROLCHARTYPe?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SPACEWIRe:CONTROLCHARTYPe valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SPACEWIRe:CONTROLCHARTYPe {FCT|ESC|ENDOFPACKet}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SPACEWIRe:CONTROLCHARTYPe?
Info
Search<x>is the search number.FCTsets the control character type to Flow Control Token.ESCsets the control character type to Escape.ENDOFPACKetsets the control character type to End of Packet.
SearchSearchItemTriggerABusSpacewireControlcodetype
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:SPACEWIRe:CONTROLCODETYPe command.
Description
- This command sets or queries the control code type to use when searching on a SpaceWire bus signal.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SPACEWIRe:CONTROLCODETYPe?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SPACEWIRe:CONTROLCODETYPe?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SPACEWIRe:CONTROLCODETYPe valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SPACEWIRe:CONTROLCODETYPe {NULL|TIMECODe}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SPACEWIRe:CONTROLCODETYPe?
Info
Search<x>is the search number.NULLsets the control code type to Null code.TIMECODesets the control code type to Time code (only varying part of Time code [6 bits] is considered for search).
SearchSearchItemTriggerABusSpacewireData
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:SPACEWIRe:DATa command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SPACEWIRe:DATa?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SPACEWIRe:DATa?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.size: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:SPACEWIRe:DATa:SIZecommand..value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:SPACEWIRe:DATa:VALuecommand.
size
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:SPACEWIRe:DATa:SIZe command.
Description
- This command sets or queries the length of the data string, in bytes, to use when searching on a SpaceWire bus signal. The search condition needs to be set to Data (see Related Commands ).
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SPACEWIRe:DATa:SIZe?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SPACEWIRe:DATa:SIZe?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SPACEWIRe:DATa:SIZe valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SPACEWIRe:DATa:SIZe <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SPACEWIRe:DATa:SIZe?
Info
Search<x>is the search number.NR1is an integer value that specifies the number of contiguous data bytes to use when searching on the SpaceWire data field. The valid range is 1 to 10.
value
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:SPACEWIRe:DATa:VALue command.
Description
- This command sets or queries the binary data value to be used when searching on an SpaceWire bus signal. The search condition must be set to Data (see Related Commands ).
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SPACEWIRe:DATa:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SPACEWIRe:DATa:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SPACEWIRe:DATa:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SPACEWIRe:DATa:VALue <Qstring>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SPACEWIRe:DATa:VALue?
Info
Search<x>is the search number.QStringspecifies the binary data value to search for on a SpaceWire bus signal.
SearchSearchItemTriggerABusSpacewireDataSize
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:SPACEWIRe:DATa:SIZe command.
Description
- This command sets or queries the length of the data string, in bytes, to use when searching on a SpaceWire bus signal. The search condition needs to be set to Data (see Related Commands ).
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SPACEWIRe:DATa:SIZe?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SPACEWIRe:DATa:SIZe?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SPACEWIRe:DATa:SIZe valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SPACEWIRe:DATa:SIZe <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SPACEWIRe:DATa:SIZe?
Info
Search<x>is the search number.NR1is an integer value that specifies the number of contiguous data bytes to use when searching on the SpaceWire data field. The valid range is 1 to 10.
SearchSearchItemTriggerABusSpacewireDataValue
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:SPACEWIRe:DATa:VALue command.
Description
- This command sets or queries the binary data value to be used when searching on an SpaceWire bus signal. The search condition must be set to Data (see Related Commands ).
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SPACEWIRe:DATa:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SPACEWIRe:DATa:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SPACEWIRe:DATa:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SPACEWIRe:DATa:VALue <Qstring>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SPACEWIRe:DATa:VALue?
Info
Search<x>is the search number.QStringspecifies the binary data value to search for on a SpaceWire bus signal.
SearchSearchItemTriggerABusSpacewireErrortype
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:SPACEWIRe:ERRORTYPe command.
Description
- This command sets or queries the error type for which to search on the SpaceWire bus signal.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SPACEWIRe:ERRORTYPe?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SPACEWIRe:ERRORTYPe?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SPACEWIRe:ERRORTYPe valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SPACEWIRe:ERRORTYPe {EEP|ESC|PARity}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SPACEWIRe:ERRORTYPe?
Info
Search<x>is the search number.EEPsets the error search type to Error end of packet.ESCsets the error search type to Escape error.PARitysets the error search type to Parity error.
SearchSearchItemTriggerABusSpacewireTimecode
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:SPACEWIRe:TIMECode command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SPACEWIRe:TIMECode?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SPACEWIRe:TIMECode?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:SPACEWIRe:TIMECode:VALuecommand.
value
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:SPACEWIRe:TIMECode:VALue command.
Description
- This command sets or queries the binary data string used for SpaceWire search if the search condition is Time Code.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SPACEWIRe:TIMECode:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SPACEWIRe:TIMECode:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SPACEWIRe:TIMECode:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SPACEWIRe:TIMECode:VALue <Qstring>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SPACEWIRe:TIMECode:VALue?
Info
Search<x>is the search number.QStringsets the binary data value to be used when searching on an SpaceWire bus signal.
SearchSearchItemTriggerABusSpacewireTimecodeValue
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:SPACEWIRe:TIMECode:VALue command.
Description
- This command sets or queries the binary data string used for SpaceWire search if the search condition is Time Code.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SPACEWIRe:TIMECode:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SPACEWIRe:TIMECode:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SPACEWIRe:TIMECode:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SPACEWIRe:TIMECode:VALue <Qstring>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SPACEWIRe:TIMECode:VALue?
Info
Search<x>is the search number.QStringsets the binary data value to be used when searching on an SpaceWire bus signal.
SearchSearchItemTriggerABusSpi
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:SPI command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SPI?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SPI?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.condition: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:CONDitioncommand..data: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:DATacommand tree..sourcetype: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:SOURCETYpecommand.
condition
property
¶
condition: SearchSearchItemTriggerABusSpiCondition
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:CONDition command.
Description
- This command sets or queries the search condition for an SPI bus search to determine where to place a mark. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:CONDition?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:CONDition?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:CONDition valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:CONDition {DATA|SS|STARTofframe}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:CONDition?
Info
DATAspecifies the trigger condition as Data.SSspecifies the trigger condition as Slave Selection.STARTofframespecifies the trigger condition as start of frame.
data
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:DATa command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:DATa?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:DATa?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.size: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:DATa:SIZecommand..value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:DATa:VALuecommand.
sourcetype
property
¶
sourcetype: SearchSearchItemTriggerABusSpiSourcetype
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:SOURCETYpe command.
Description
- This command sets or queries trigger Source for SPI bus. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:SOURCETYpe?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:SOURCETYpe?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:SOURCETYpe valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:SOURCETYpe {MISo|MOSi}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:SOURCETYpe?
Info
MISospecifies the trigger source as MISo. The default search source type is MISo.MOSispecifies the trigger source as MOSi.
SearchSearchItemTriggerABusSpiCondition
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:CONDition command.
Description
- This command sets or queries the search condition for an SPI bus search to determine where to place a mark. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:CONDition?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:CONDition?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:CONDition valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:CONDition {DATA|SS|STARTofframe}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:CONDition?
Info
DATAspecifies the trigger condition as Data.SSspecifies the trigger condition as Slave Selection.STARTofframespecifies the trigger condition as start of frame.
SearchSearchItemTriggerABusSpiData
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:DATa command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:DATa?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:DATa?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.size: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:DATa:SIZecommand..value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:DATa:VALuecommand.
size
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:DATa:SIZe command.
Description
- This command sets or queries the length of the data string in bytes used for the specified SPI bus trigger search to determine where to place a mark. The search condition must be DATA. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:DATa:SIZe?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:DATa:SIZe?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:DATa:SIZe valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:DATa:SIZe <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:DATa:SIZe?
Info
<NR1>specifies the number of contiguous data bytes.
value
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:DATa:VALue command.
Description
- The command sets or queries the binary data string used for an SPI bus search to determine where to place a mark. The search number is specified by x. The search condition must be DATA.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:DATa:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:DATa:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:DATa:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:DATa:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:DATa:VALue?
Info
<QString>specifies the data value in the specified valid format. The valid characters are 0, 1, and X for binary format; and A-F, 0-9, and X for hexadecimal format.
SearchSearchItemTriggerABusSpiDataSize
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:DATa:SIZe command.
Description
- This command sets or queries the length of the data string in bytes used for the specified SPI bus trigger search to determine where to place a mark. The search condition must be DATA. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:DATa:SIZe?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:DATa:SIZe?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:DATa:SIZe valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:DATa:SIZe <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:DATa:SIZe?
Info
<NR1>specifies the number of contiguous data bytes.
SearchSearchItemTriggerABusSpiDataValue
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:DATa:VALue command.
Description
- The command sets or queries the binary data string used for an SPI bus search to determine where to place a mark. The search number is specified by x. The search condition must be DATA.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:DATa:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:DATa:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:DATa:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:DATa:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:DATa:VALue?
Info
<QString>specifies the data value in the specified valid format. The valid characters are 0, 1, and X for binary format; and A-F, 0-9, and X for hexadecimal format.
SearchSearchItemTriggerABusSpiSourcetype
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:SOURCETYpe command.
Description
- This command sets or queries trigger Source for SPI bus. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:SOURCETYpe?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:SOURCETYpe?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:SOURCETYpe valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:SOURCETYpe {MISo|MOSi}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:SOURCETYpe?
Info
MISospecifies the trigger source as MISo. The default search source type is MISo.MOSispecifies the trigger source as MOSi.
SearchSearchItemTriggerABusSpmi
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.condition: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:CONDitioncommand..data: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:DATacommand tree..masteraddress: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:MASTERADDResscommand tree..noresponse: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:NORESPonsecommand..registeraddress: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:REGISTERADDResscommand tree..slaveaddress: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:SLAVEADDResscommand tree.
condition
property
¶
condition: SearchSearchItemTriggerABusSpmiCondition
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:CONDition command.
Description
- This command sets or queries the search condition for an SPMI bus.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:CONDition?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:CONDition?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:CONDition valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:CONDition {SSC|RESet|SLEep|SHUTdown|WAKeup|MASTERREAd|MASTERWRIte|REGREAd|REGWRIte|DEVICEDESCMASTERREAd|DEVICEDESCSLAVEREAd|EXTREGREAd|EXTREGWRIte|LONGEXTREGREAd|LONGEXTREGWRIte|REG0WRIte|AUTHenticate|TRANSferbusownership|PARItyerror}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:CONDition?
Info
Search<x>is the search identifier number.SSCspecifies searching for the Sequence Start Condition.RESetspecifies searching for the Reset command sequence.SLEepspecifies searching for the Sleep command sequnce.SHUTdownspecifies searching for the Shutdown command sequence.WAKeupspecifies searching for the Wakeup command sequence.MASTERREAdspecifies searching for the Master Read command sequence.MASTERWRItespecifies searching for the Master Write command sequence.REGREAdspecifies searching for the Register Read command sequence.REGWRItespecifies searching for the Register Write command sequence.DEVICEDESCMASTERREAdspecifies searching for the Device Descriptor Block Master Read command sequence.DEVICEDESCSLAVEREAdspecifies searching for the Device Descriptor Block Slave Read command sequence.EXTREGREAdspecifies triggering on the Extended Register Read command sequence.EXTREGWRItespecifies searching for the Extended Register Write command sequence.LONGEXTREGREAdspecifies searching for the Extended Register Read Long command sequence.LONGEXTREGWRItespecifies searching for the Extended Register Write Long command sequence.REG0WRItespecifies searching for the Register 0 Write command sequence.AUTHenticatespecifies searching for the Authentication command sequence.TRANSferbusownershipspecifies searching for the Transfer Bus Ownership (TBO) command sequence.PARItyerrorspecifies searching for the parity errors.
data
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:DATa command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:DATa?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:DATa?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.size: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:DATa:SIZecommand..value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:DATa:VALuecommand.
masteraddress
property
¶
masteraddress: SearchSearchItemTriggerABusSpmiMasteraddress
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:MASTERADDRess command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:MASTERADDRess?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:MASTERADDRess?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:MASTERADDRess:VALuecommand.
noresponse
property
¶
noresponse: SearchSearchItemTriggerABusSpmiNoresponse
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:NORESPonse command.
Description
- This command sets or queries whether or not to search for No Response frames.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:NORESPonse?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:NORESPonse?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:NORESPonse valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:NORESPonse <Qstring>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:NORESPonse?
Info
Search<x>is the search identifier number.<Qstring>is either ‘TRUE’ or ‘FALSE’ boolean value for searching on SPMI No Response frames.
registeraddress
property
¶
registeraddress: SearchSearchItemTriggerABusSpmiRegisteraddress
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:REGISTERADDRess command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:REGISTERADDRess?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:REGISTERADDRess?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:REGISTERADDRess:VALuecommand.
slaveaddress
property
¶
slaveaddress: SearchSearchItemTriggerABusSpmiSlaveaddress
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:SLAVEADDRess command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:SLAVEADDRess?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:SLAVEADDRess?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:SLAVEADDRess:VALuecommand.
SearchSearchItemTriggerABusSpmiCondition
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:CONDition command.
Description
- This command sets or queries the search condition for an SPMI bus.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:CONDition?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:CONDition?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:CONDition valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:CONDition {SSC|RESet|SLEep|SHUTdown|WAKeup|MASTERREAd|MASTERWRIte|REGREAd|REGWRIte|DEVICEDESCMASTERREAd|DEVICEDESCSLAVEREAd|EXTREGREAd|EXTREGWRIte|LONGEXTREGREAd|LONGEXTREGWRIte|REG0WRIte|AUTHenticate|TRANSferbusownership|PARItyerror}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:CONDition?
Info
Search<x>is the search identifier number.SSCspecifies searching for the Sequence Start Condition.RESetspecifies searching for the Reset command sequence.SLEepspecifies searching for the Sleep command sequnce.SHUTdownspecifies searching for the Shutdown command sequence.WAKeupspecifies searching for the Wakeup command sequence.MASTERREAdspecifies searching for the Master Read command sequence.MASTERWRItespecifies searching for the Master Write command sequence.REGREAdspecifies searching for the Register Read command sequence.REGWRItespecifies searching for the Register Write command sequence.DEVICEDESCMASTERREAdspecifies searching for the Device Descriptor Block Master Read command sequence.DEVICEDESCSLAVEREAdspecifies searching for the Device Descriptor Block Slave Read command sequence.EXTREGREAdspecifies triggering on the Extended Register Read command sequence.EXTREGWRItespecifies searching for the Extended Register Write command sequence.LONGEXTREGREAdspecifies searching for the Extended Register Read Long command sequence.LONGEXTREGWRItespecifies searching for the Extended Register Write Long command sequence.REG0WRItespecifies searching for the Register 0 Write command sequence.AUTHenticatespecifies searching for the Authentication command sequence.TRANSferbusownershipspecifies searching for the Transfer Bus Ownership (TBO) command sequence.PARItyerrorspecifies searching for the parity errors.
SearchSearchItemTriggerABusSpmiData
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:DATa command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:DATa?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:DATa?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.size: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:DATa:SIZecommand..value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:DATa:VALuecommand.
size
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:DATa:SIZe command.
Description
- This command sets or queries the length of the data string, in bytes, to be used when searching on an SPMI bus signal.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:DATa:SIZe?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:DATa:SIZe?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:DATa:SIZe valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:DATa:SIZe <NR2>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:DATa:SIZe?
Info
Search<x>is the Search identifier number.<NR2>is the size of the data string in bytes.
value
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:DATa:VALue command.
Description
- This command specifies the binary data string used for SPMI when the search condition is MASTERREAd, MASTERWRIte, REGREAd, REGWRIte, EXTREGREAd, EXTREGWRIte, LONGEXTREGREAd, LONGEXTREGWRIte, or REG0WRIte.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:DATa:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:DATa:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:DATa:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:DATa:VALue <Qstring>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:DATa:VALue?
Info
Search<x>is the search identifier number.<Qstring>is the binary data string that identifies the data value for which to search.
SearchSearchItemTriggerABusSpmiDataSize
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:DATa:SIZe command.
Description
- This command sets or queries the length of the data string, in bytes, to be used when searching on an SPMI bus signal.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:DATa:SIZe?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:DATa:SIZe?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:DATa:SIZe valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:DATa:SIZe <NR2>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:DATa:SIZe?
Info
Search<x>is the Search identifier number.<NR2>is the size of the data string in bytes.
SearchSearchItemTriggerABusSpmiDataValue
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:DATa:VALue command.
Description
- This command specifies the binary data string used for SPMI when the search condition is MASTERREAd, MASTERWRIte, REGREAd, REGWRIte, EXTREGREAd, EXTREGWRIte, LONGEXTREGREAd, LONGEXTREGWRIte, or REG0WRIte.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:DATa:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:DATa:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:DATa:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:DATa:VALue <Qstring>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:DATa:VALue?
Info
Search<x>is the search identifier number.<Qstring>is the binary data string that identifies the data value for which to search.
SearchSearchItemTriggerABusSpmiMasteraddress
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:MASTERADDRess command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:MASTERADDRess?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:MASTERADDRess?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:MASTERADDRess:VALuecommand.
value
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:MASTERADDRess:VALue command.
Description
- This command sets or queries the binary data string that identifies the master address used in SPMI when the search condition is MASTERREAd, MASTERWRIte, or DEVICEDESCMASTERREAd.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:MASTERADDRess:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:MASTERADDRess:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:MASTERADDRess:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:MASTERADDRess:VALue <Qstring>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:MASTERADDRess:VALue?
Info
Search<x>is the search identifier number.<Qstring>is the binary data string that identifies the master address for which to search.
SearchSearchItemTriggerABusSpmiMasteraddressValue
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:MASTERADDRess:VALue command.
Description
- This command sets or queries the binary data string that identifies the master address used in SPMI when the search condition is MASTERREAd, MASTERWRIte, or DEVICEDESCMASTERREAd.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:MASTERADDRess:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:MASTERADDRess:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:MASTERADDRess:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:MASTERADDRess:VALue <Qstring>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:MASTERADDRess:VALue?
Info
Search<x>is the search identifier number.<Qstring>is the binary data string that identifies the master address for which to search.
SearchSearchItemTriggerABusSpmiNoresponse
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:NORESPonse command.
Description
- This command sets or queries whether or not to search for No Response frames.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:NORESPonse?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:NORESPonse?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:NORESPonse valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:NORESPonse <Qstring>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:NORESPonse?
Info
Search<x>is the search identifier number.<Qstring>is either ‘TRUE’ or ‘FALSE’ boolean value for searching on SPMI No Response frames.
SearchSearchItemTriggerABusSpmiRegisteraddress
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:REGISTERADDRess command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:REGISTERADDRess?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:REGISTERADDRess?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:REGISTERADDRess:VALuecommand.
value
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:REGISTERADDRess:VALue command.
Description
- This command sets or queries the binary data string that identifies the register address used in SPMI triggering if the trigger condition is MASTERREAd, MASTERWRIte, REGREAd, REGWRIte, EXTREGREAd, EXTREGWRIte, LONGEXTREGREAd, or LONGEXTREGWRIte.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:REGISTERADDRess:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:REGISTERADDRess:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:REGISTERADDRess:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:REGISTERADDRess:VALue <Qstring>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:REGISTERADDRess:VALue?
Info
Search<x>is the search identifier number.<Qstring>is the binary data string that identifies the register address for which to search.
SearchSearchItemTriggerABusSpmiRegisteraddressValue
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:REGISTERADDRess:VALue command.
Description
- This command sets or queries the binary data string that identifies the register address used in SPMI triggering if the trigger condition is MASTERREAd, MASTERWRIte, REGREAd, REGWRIte, EXTREGREAd, EXTREGWRIte, LONGEXTREGREAd, or LONGEXTREGWRIte.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:REGISTERADDRess:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:REGISTERADDRess:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:REGISTERADDRess:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:REGISTERADDRess:VALue <Qstring>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:REGISTERADDRess:VALue?
Info
Search<x>is the search identifier number.<Qstring>is the binary data string that identifies the register address for which to search.
SearchSearchItemTriggerABusSpmiSlaveaddress
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:SLAVEADDRess command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:SLAVEADDRess?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:SLAVEADDRess?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:SLAVEADDRess:VALuecommand.
value
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:SLAVEADDRess:VALue command.
Description
- This command sets or queries the binary data string that identifies the slave address used in SPMI when the search condition is RESet, SLEep, SHUTdown, WAKeup, AUTHenticate, REGREAd, REGWRIte, EXTREGREAd, EXTREGWRIte, LONGEXTREGREAd, LONGEXTREGWRIte, DEVICEDESCSLAVEREAd, or REG0WRIte.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:SLAVEADDRess:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:SLAVEADDRess:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:SLAVEADDRess:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:SLAVEADDRess:VALue <Qstring>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:SLAVEADDRess:VALue?
Info
Search<x>is the search identifier number.<Qstring>is the binary data string that identifies the slave address for which to search.
SearchSearchItemTriggerABusSpmiSlaveaddressValue
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:SLAVEADDRess:VALue command.
Description
- This command sets or queries the binary data string that identifies the slave address used in SPMI when the search condition is RESet, SLEep, SHUTdown, WAKeup, AUTHenticate, REGREAd, REGWRIte, EXTREGREAd, EXTREGWRIte, LONGEXTREGREAd, LONGEXTREGWRIte, DEVICEDESCSLAVEREAd, or REG0WRIte.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:SLAVEADDRess:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:SLAVEADDRess:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:SLAVEADDRess:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:SLAVEADDRess:VALue <Qstring>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SPMI:SLAVEADDRess:VALue?
Info
Search<x>is the search identifier number.<Qstring>is the binary data string that identifies the slave address for which to search.
SearchSearchItemTriggerABusSvid
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:SVID command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SVID?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SVID?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.command: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:COMMandcommand tree..condition: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:CONDitioncommand..error: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:ERRorcommand tree..payload: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:PAYLoadcommand tree..slave: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:SLAVEcommand tree.
command
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:COMMand command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:COMMand?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:COMMand?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.response: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:COMMand:RESPonsecommand..type: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:COMMand:TYPecommand.
condition
property
¶
condition: SearchSearchItemTriggerABusSvidCondition
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:CONDition command.
Description
- This command sets or queries the trigger condition for SVID bus.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:CONDition?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:CONDition?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:CONDition valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:CONDition {STARTCONDition|SLAVEADDRess|COMMand|PAYLoad|ERRors}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:CONDition?
Info
Search<x>is the search identifier number.STARTCONDitionspecifies the search condition as STARTCONDition. This is the default trigger on condition.SLAVEADDRessspecifies the search condition as SLAVEADDRess.COMMandspecifies the search condition as COMMand.PAYLoadspecifies the search condition as PAYLoad.ERRorsspecifies the search condition as ERRors.
error
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:ERRor command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:ERRor?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:ERRor?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.type: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:ERRor:TYPecommand.
payload
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:PAYLoad command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:PAYLoad?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:PAYLoad?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.type: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:PAYLoad:TYPecommand..value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:PAYLoad:VALuecommand.
slave
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:SLAVE command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:SLAVE?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:SLAVE?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.address: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:SLAVE:ADDRESScommand.
SearchSearchItemTriggerABusSvidCommand
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:COMMand command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:COMMand?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:COMMand?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.response: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:COMMand:RESPonsecommand..type: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:COMMand:TYPecommand.
response
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:COMMand:RESPonse command.
Description
- This command sets or queries the command response of the respective command type for SVID bus.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:COMMand:RESPonse?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:COMMand:RESPonse?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:COMMand:RESPonse valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:COMMand:RESPonse {GETReg|GETRegvendor|GETRegtestcfg|SETFast|SETSlow|SETDecay|SETPs|SETRegaddr|SETRegdata|REGAddrvendor|REGDatavendor|REGAddrtestconfg|REGDatatestconfg|TESTmode|SETWp|GETRegpktrecent|GETRegpktalert|GETRegpktbad|GETRegvrevent}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:COMMand:RESPonse?
Info
Search<x>is the search identifier number.GETRegspecifies the search condition as GETReg. This is the default command response condition.GETRegvendorspecifies the search condition as GETRegvendor.GETRegtestcfgspecifies the search condition as GETRegtestcfg.SETFastspecifies the search condition as SETFast.SETSlowspecifies the search condition as SETSlow.SETDecayspecifies the search condition as SETDecay.SETPsspecifies the search condition as SETPs.SETRegaddrspecifies the search condition as SETRegaddr.SETRegdataspecifies the search condition as SETRegdata.REGAddrvendorspecifies the search condition as REGAddrvendor.REGDatavendorspecifies the search condition as REGDatavendor.REGAddrtestconfgspecifies the search condition as REGAddrtestconfg.REGDatatestconfgspecifies the search condition as REGDatatestconfg.TESTmodespecifies the search condition as TESTmode.SETWpspecifies the search condition as SETWp.GETRegpktrecentspecifies the search condition as GETRegpktrecent.GETRegpktalertspecifies the search condition as GETRegpktalert.GETRegpktbadspecifies the search condition as GETRegpktbad.GETRegvreventspecifies the search condition as GETRegvrevent.
type
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:COMMand:TYPe command.
Description
- This command sets or queries the command type for SVID bus.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:COMMand:TYPe?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:COMMand:TYPe?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:COMMand:TYPe valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:COMMand:TYPe {GET|SET|OPTional}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:COMMand:TYPe?
Info
Search<x>is the search identifier number.GETspecifies the search condition as GET. This is the default command type condition.SETspecifies the search condition as SET.OPTionalspecifies the search condition as OPTional.
SearchSearchItemTriggerABusSvidCommandResponse
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:COMMand:RESPonse command.
Description
- This command sets or queries the command response of the respective command type for SVID bus.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:COMMand:RESPonse?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:COMMand:RESPonse?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:COMMand:RESPonse valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:COMMand:RESPonse {GETReg|GETRegvendor|GETRegtestcfg|SETFast|SETSlow|SETDecay|SETPs|SETRegaddr|SETRegdata|REGAddrvendor|REGDatavendor|REGAddrtestconfg|REGDatatestconfg|TESTmode|SETWp|GETRegpktrecent|GETRegpktalert|GETRegpktbad|GETRegvrevent}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:COMMand:RESPonse?
Info
Search<x>is the search identifier number.GETRegspecifies the search condition as GETReg. This is the default command response condition.GETRegvendorspecifies the search condition as GETRegvendor.GETRegtestcfgspecifies the search condition as GETRegtestcfg.SETFastspecifies the search condition as SETFast.SETSlowspecifies the search condition as SETSlow.SETDecayspecifies the search condition as SETDecay.SETPsspecifies the search condition as SETPs.SETRegaddrspecifies the search condition as SETRegaddr.SETRegdataspecifies the search condition as SETRegdata.REGAddrvendorspecifies the search condition as REGAddrvendor.REGDatavendorspecifies the search condition as REGDatavendor.REGAddrtestconfgspecifies the search condition as REGAddrtestconfg.REGDatatestconfgspecifies the search condition as REGDatatestconfg.TESTmodespecifies the search condition as TESTmode.SETWpspecifies the search condition as SETWp.GETRegpktrecentspecifies the search condition as GETRegpktrecent.GETRegpktalertspecifies the search condition as GETRegpktalert.GETRegpktbadspecifies the search condition as GETRegpktbad.GETRegvreventspecifies the search condition as GETRegvrevent.
SearchSearchItemTriggerABusSvidCommandType
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:COMMand:TYPe command.
Description
- This command sets or queries the command type for SVID bus.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:COMMand:TYPe?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:COMMand:TYPe?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:COMMand:TYPe valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:COMMand:TYPe {GET|SET|OPTional}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:COMMand:TYPe?
Info
Search<x>is the search identifier number.GETspecifies the search condition as GET. This is the default command type condition.SETspecifies the search condition as SET.OPTionalspecifies the search condition as OPTional.
SearchSearchItemTriggerABusSvidCondition
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:CONDition command.
Description
- This command sets or queries the trigger condition for SVID bus.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:CONDition?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:CONDition?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:CONDition valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:CONDition {STARTCONDition|SLAVEADDRess|COMMand|PAYLoad|ERRors}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:CONDition?
Info
Search<x>is the search identifier number.STARTCONDitionspecifies the search condition as STARTCONDition. This is the default trigger on condition.SLAVEADDRessspecifies the search condition as SLAVEADDRess.COMMandspecifies the search condition as COMMand.PAYLoadspecifies the search condition as PAYLoad.ERRorsspecifies the search condition as ERRors.
SearchSearchItemTriggerABusSvidError
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:ERRor command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:ERRor?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:ERRor?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.type: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:ERRor:TYPecommand.
type
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:ERRor:TYPe command.
Description
- This command sets or queries the error type for SVID bus.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:ERRor:TYPe?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:ERRor:TYPe?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:ERRor:TYPe valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:ERRor:TYPe {ANY|NACK|REJect|MIXed|PARity}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:ERRor:TYPe?
Info
Search<x>is the search identifier number.ANYspecifies the search condition as ANY. This is the default error type condition.NACKspecifies the search condition as NACK.REJectspecifies the search condition as REJect.MIXedspecifies the search condition as MIXed.PARityspecifies the search condition as PARity.
SearchSearchItemTriggerABusSvidErrorType
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:ERRor:TYPe command.
Description
- This command sets or queries the error type for SVID bus.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:ERRor:TYPe?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:ERRor:TYPe?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:ERRor:TYPe valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:ERRor:TYPe {ANY|NACK|REJect|MIXed|PARity}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:ERRor:TYPe?
Info
Search<x>is the search identifier number.ANYspecifies the search condition as ANY. This is the default error type condition.NACKspecifies the search condition as NACK.REJectspecifies the search condition as REJect.MIXedspecifies the search condition as MIXed.PARityspecifies the search condition as PARity.
SearchSearchItemTriggerABusSvidPayload
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:PAYLoad command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:PAYLoad?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:PAYLoad?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.type: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:PAYLoad:TYPecommand..value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:PAYLoad:VALuecommand.
type
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:PAYLoad:TYPe command.
Description
- This command sets or queries the payload type for SVID bus.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:PAYLoad:TYPe?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:PAYLoad:TYPe?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:PAYLoad:TYPe valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:PAYLoad:TYPe {MASTer|SLAVe|EITHer}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:PAYLoad:TYPe?
Info
Search<x>is the search identifier number.MASTerspecifies the search condition as MASTer. This is the default payload type condition.SLAVespecifies the search condition as SLAVe.EITHerspecifies the search condition as EITHer.
value
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:PAYLoad:VALue command.
Description
- This command sets or queries the payload value to be used when search is on SVID bus.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:PAYLoad:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:PAYLoad:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:PAYLoad:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:PAYLoad:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:PAYLoad:VALue?
Info
Search<x>is the search identifier number.<QString>specifies the data value in the specified valid format. The valid characters are 0, 1, and X for binary; for hexadecimal; and symbolic).
SearchSearchItemTriggerABusSvidPayloadType
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:PAYLoad:TYPe command.
Description
- This command sets or queries the payload type for SVID bus.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:PAYLoad:TYPe?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:PAYLoad:TYPe?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:PAYLoad:TYPe valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:PAYLoad:TYPe {MASTer|SLAVe|EITHer}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:PAYLoad:TYPe?
Info
Search<x>is the search identifier number.MASTerspecifies the search condition as MASTer. This is the default payload type condition.SLAVespecifies the search condition as SLAVe.EITHerspecifies the search condition as EITHer.
SearchSearchItemTriggerABusSvidPayloadValue
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:PAYLoad:VALue command.
Description
- This command sets or queries the payload value to be used when search is on SVID bus.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:PAYLoad:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:PAYLoad:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:PAYLoad:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:PAYLoad:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:PAYLoad:VALue?
Info
Search<x>is the search identifier number.<QString>specifies the data value in the specified valid format. The valid characters are 0, 1, and X for binary; for hexadecimal; and symbolic).
SearchSearchItemTriggerABusSvidSlave
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:SLAVE command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:SLAVE?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:SLAVE?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.address: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:SLAVE:ADDRESScommand.
address
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:SLAVE:ADDRESS command.
Description
- This command sets or queries the slave address to be used when search is on SVID bus.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:SLAVE:ADDRESS?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:SLAVE:ADDRESS?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:SLAVE:ADDRESS valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:SLAVE:ADDRESS <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:SLAVE:ADDRESS?
Info
Search<x>is the search identifier number.<QString>specifies the data value in the specified valid format. The valid characters are 0, 1, and X for binary; for hexadecimal; and symbolic). the default address is XXXX.
SearchSearchItemTriggerABusSvidSlaveAddress
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:SLAVE:ADDRESS command.
Description
- This command sets or queries the slave address to be used when search is on SVID bus.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:SLAVE:ADDRESS?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:SLAVE:ADDRESS?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:SLAVE:ADDRESS valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:SLAVE:ADDRESS <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SVID:SLAVE:ADDRESS?
Info
Search<x>is the search identifier number.<QString>specifies the data value in the specified valid format. The valid characters are 0, 1, and X for binary; for hexadecimal; and symbolic). the default address is XXXX.
SearchSearchItemTriggerABusUsb
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:USB?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:USB?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.address: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ADDresscommand tree..condition: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:USB:CONDitioncommand..data: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATacommand tree..endpoint: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ENDPointcommand tree..errtype: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ERRTYPEcommand..handshaketype: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:USB:HANDSHAKETypecommand..sofframenumber: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SOFFRAMENUMbercommand..specialtype: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPECIALTypecommand..split: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLITcommand tree..tokentype: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:USB:TOKENTypecommand.
address
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ADDress command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ADDress?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ADDress?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.hivalue: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ADDress:HIVALuecommand..value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ADDress:VALuecommand.
condition
property
¶
condition: SearchSearchItemTriggerABusUsbCondition
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:CONDition command.
Description
- This command sets or queries the search condition for a USB bus search to determine where to place a mark. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:USB:CONDition?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:USB:CONDition?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:USB:CONDition valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:CONDition {DATAPacket|EOP|ERRor|HANDSHAKEPacket|RESET|RESUME|SPECIALPacket|SUSPEND|SYNC|TOKENPacket}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:CONDition?
Info
DATAPacketspecifies the search condition as Data Packet.EOPspecifies the search condition as End of Packet.ERRORspecifies the search condition as Error.HANDSHAKEPacketspecifies the search condition as Handshake Packet.RESETspecifies the search condition as Reset.RESUMEspecifies the search condition as Resume.SPECIALPacketspecifies the search condition as Special Packet.SUSPENDspecifies the search condition as Suspend.SYNCspecifies the search condition as Sync.TOKENPacketspecifies the search condition as Token (Address) Packet.
data
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.hivalue: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:HIVALuecommand..offset: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:OFFSetcommand..qualifier: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:QUALifiercommand..size: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:SIZecommand..type: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:TYPecommand..value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:VALuecommand.
endpoint
property
¶
endpoint: SearchSearchItemTriggerABusUsbEndpoint
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ENDPoint command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ENDPoint?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ENDPoint?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ENDPoint:VALuecommand.
errtype
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ERRTYPE command.
Description
- This command sets or queries the error type for the specified USB bus trigger search
to determine where to place a mark.
is the search number.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ERRTYPE?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ERRTYPE?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ERRTYPE valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ERRTYPE {BITSTUFFing|CRC5|CRC16|PID}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ERRTYPE?
Info
BITSTUFFingspecifies the error type as Bit Stuffing.CRC5specifies the error type as Token CRC5 (Cyclic Redundancy Check 5).CRC16specifies the error type as Data CRC16 (Cyclic Redundancy Check 16).PIDspecifies the error type as PID Check Bits.
handshaketype
property
¶
handshaketype: SearchSearchItemTriggerABusUsbHandshaketype
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:HANDSHAKEType command.
Description
- This command sets or queries the handshake type for the specified USB bus trigger
search to determine where to place a mark.
is the search number.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:USB:HANDSHAKEType?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:USB:HANDSHAKEType?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:USB:HANDSHAKEType valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:HANDSHAKEType {ACK|ANY|NAK|NYET|STALL}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:HANDSHAKEType?
Info
ACKspecifies the handshake type as Acknowledgement (positive) (XX10).ANYspecifies the handshake type as Any (0010).NAKspecifies the handshake type as Negative Acknowledgment (1010).NYETspecifies the handshake type as No response Yet (0110).STALLspecifies the handshake type as Stall (endpoint is halted or control pipe request not supported) (1110).
sofframenumber
property
¶
sofframenumber: SearchSearchItemTriggerABusUsbSofframenumber
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SOFFRAMENUMber command.
Description
- This command sets or queries the frame number string to use for the Start of Frame for the specified USB bus trigger search to determine where to place a mark. The search number is specified by x. The search condition must be set to TOKEN.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SOFFRAMENUMber?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SOFFRAMENUMber?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SOFFRAMENUMber valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SOFFRAMENUMber <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SOFFRAMENUMber?
Info
<QString>specifies the frame number string for the Start of Frame in a valid format (binary, hexadecimal, or symbolic).
specialtype
property
¶
specialtype: SearchSearchItemTriggerABusUsbSpecialtype
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPECIALType command.
Description
- This command sets or queries the USB search type for the specified USB bus trigger search to determine where to place a mark. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPECIALType?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPECIALType?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPECIALType valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPECIALType {ANY|ERROr|PING|PREamble|RESERVed|SPLit}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPECIALType?
Info
ANYspecifies the PID value as Any (XX00).ERROrspecifies the PID value as ERR (1100).PINGspecifies the PID value as PING (0100).PREamblespecifies the PID value as PRE (1100).RESERVedspecifies the PID value as Reserved (0000).SPLitspecifies the PID value as Split (1000).
split
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.et: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:ETcommand tree..hub: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:HUBcommand tree..port: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:PORTcommand tree..sc: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:SCcommand tree..se: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:SEcommand tree.
tokentype
property
¶
tokentype: SearchSearchItemTriggerABusUsbTokentype
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:TOKENType command.
Description
- This command sets or queries the token type when the specified USB bus trigger search
to determine where to place a mark.
is the search number.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:USB:TOKENType?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:USB:TOKENType?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:USB:TOKENType valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:TOKENType {ANY|IN|OUT|SETUP|SOF}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:TOKENType?
Info
ANYspecifies the token type as Any (XX01).INspecifies the token type as IN (1001).OUTspecifies the token type as OUT (0001).SETUPspecifies the token type as SETUP (1101).SOFspecifies the token type as Start Of Frame (0101).
SearchSearchItemTriggerABusUsbAddress
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ADDress command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ADDress?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ADDress?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.hivalue: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ADDress:HIVALuecommand..value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ADDress:VALuecommand.
hivalue
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ADDress:HIVALue command.
Description
- This command sets or queries the high binary address value used when searching on a USB bus signal to determine where to place a mark. The search number is specified by x. The search condition must be set to TOKEN. The VALue and HIVALue set a range that the INrange and OUTrange qualifiers use to decide when to trigger. For example, if the QUALIFER is set to INrange, and the address is within the range set by VALue and HIVALue, then a trigger can be generated.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ADDress:HIVALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ADDress:HIVALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ADDress:HIVALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ADDress:HIVALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ADDress:HIVALue?
Info
<QString>specifies the data value in the specified valid format. The valid characters are 0, 1, and X for binary; for hexadecimal; and symbolic).
value
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ADDress:VALue command.
Description
- This command sets or queries the binary address value used for a USB bus search to determine where to place a mark. The search number is specified by x. The search condition must be set to TOKEN.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ADDress:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ADDress:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ADDress:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ADDress:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ADDress:VALue?
Info
<QString>specifies the data value in the specified valid format. Valid characters are 0, 1, and X for binary; A-F, 0-9 and X for hexadecimal; and for symbolic.
SearchSearchItemTriggerABusUsbAddressHivalue
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ADDress:HIVALue command.
Description
- This command sets or queries the high binary address value used when searching on a USB bus signal to determine where to place a mark. The search number is specified by x. The search condition must be set to TOKEN. The VALue and HIVALue set a range that the INrange and OUTrange qualifiers use to decide when to trigger. For example, if the QUALIFER is set to INrange, and the address is within the range set by VALue and HIVALue, then a trigger can be generated.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ADDress:HIVALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ADDress:HIVALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ADDress:HIVALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ADDress:HIVALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ADDress:HIVALue?
Info
<QString>specifies the data value in the specified valid format. The valid characters are 0, 1, and X for binary; for hexadecimal; and symbolic).
SearchSearchItemTriggerABusUsbAddressValue
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ADDress:VALue command.
Description
- This command sets or queries the binary address value used for a USB bus search to determine where to place a mark. The search number is specified by x. The search condition must be set to TOKEN.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ADDress:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ADDress:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ADDress:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ADDress:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ADDress:VALue?
Info
<QString>specifies the data value in the specified valid format. Valid characters are 0, 1, and X for binary; A-F, 0-9 and X for hexadecimal; and for symbolic.
SearchSearchItemTriggerABusUsbCondition
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:CONDition command.
Description
- This command sets or queries the search condition for a USB bus search to determine where to place a mark. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:USB:CONDition?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:USB:CONDition?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:USB:CONDition valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:CONDition {DATAPacket|EOP|ERRor|HANDSHAKEPacket|RESET|RESUME|SPECIALPacket|SUSPEND|SYNC|TOKENPacket}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:CONDition?
Info
DATAPacketspecifies the search condition as Data Packet.EOPspecifies the search condition as End of Packet.ERRORspecifies the search condition as Error.HANDSHAKEPacketspecifies the search condition as Handshake Packet.RESETspecifies the search condition as Reset.RESUMEspecifies the search condition as Resume.SPECIALPacketspecifies the search condition as Special Packet.SUSPENDspecifies the search condition as Suspend.SYNCspecifies the search condition as Sync.TOKENPacketspecifies the search condition as Token (Address) Packet.
SearchSearchItemTriggerABusUsbData
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.hivalue: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:HIVALuecommand..offset: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:OFFSetcommand..qualifier: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:QUALifiercommand..size: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:SIZecommand..type: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:TYPecommand..value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:VALuecommand.
hivalue
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:HIVALue command.
Description
- This command sets or queries the high binary data value used with In Range and Out of Range qualifiers for a USB bus search to determine where to place a mark. The search number is specified by x. The search condition must be set to DATA.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:HIVALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:HIVALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:HIVALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:HIVALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:HIVALue?
Info
<QString>specifies the data value in the specified valid format (binary, hexadecimal, or symbolic). The valid characters for binary are 0, 1, and X;.
offset
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:OFFSet command.
Description
- This command sets the byte offset to look for a data pattern at, in bytes, to be used when searching on a USB bus signal. The search number is specified by x. The search condition must be set to DATA.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:OFFSet?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:OFFSet?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:OFFSet valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:OFFSet <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:OFFSet?
Info
<NR1>specifies the data offset in bytes.
qualifier
property
¶
qualifier: SearchSearchItemTriggerABusUsbDataQualifier
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:QUALifier command.
Description
- This command sets or queries the qualifier to be used when searching on a USB bus signal. The search condition must be set to IDANDDATA OR DATA. The search number is specified by x.
Usage
- Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:QUALifier valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:QUALifier {EQual|UNEQual|LESSthan|MOREthan|LESSEQual|MOREEQual|INrange|OUTrange}
Info
EQUalspecifies the qualifier as Equal.INrangespecifies the qualifier as Inside Range.LESSEQualspecifies the qualifier as Less Than or Equal to.MOREEQualspecifies the qualifier as More Than or Equal to.OUTrangespecifies the qualifier as Out of Range.UNEQualspecifies the qualifier as Unequal.LESSThanspecifies the qualifier as Less Than.MOREThanspecifies the qualifier as More Than.
size
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:SIZe command.
Description
- This command sets or queries the length of the data string, in bytes, used for a USB bus search to determine where to place a mark. The search number is specified by x. The search condition must be set to DATA.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:SIZe?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:SIZe?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:SIZe valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:SIZe <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:SIZe?
Info
<NR1>specifies the data size in bytes.
type
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:TYPe command.
Description
- This command sets or queries the data packet type for the specified USB bus trigger
search to determine where to place a mark.
is the search number.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:TYPe?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:TYPe?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:TYPe valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:TYPe {ANY|DATA<x>|MDATA}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:TYPe?
Info
ANYspecifies the data packet type as Any.DATA0specifies the data packet type as DATA0.DATA1specifies the data packet type as DATA1.DATA2specifies the data packet type as DATA2.MDATAspecifies the data packet type as MDATA.
value
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:VALue command.
Description
- This command sets or queries the binary data value used for a USB bus search to determine where to place a mark. The search number is specified by x. The search condition must be set to DATA.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:VALue?
Info
<QString>specifies the data value. The valid characters are 0, 1, and X for binary format; and A-F, 0-9, and X for hexadecimal format.
SearchSearchItemTriggerABusUsbDataHivalue
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:HIVALue command.
Description
- This command sets or queries the high binary data value used with In Range and Out of Range qualifiers for a USB bus search to determine where to place a mark. The search number is specified by x. The search condition must be set to DATA.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:HIVALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:HIVALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:HIVALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:HIVALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:HIVALue?
Info
<QString>specifies the data value in the specified valid format (binary, hexadecimal, or symbolic). The valid characters for binary are 0, 1, and X;.
SearchSearchItemTriggerABusUsbDataOffset
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:OFFSet command.
Description
- This command sets the byte offset to look for a data pattern at, in bytes, to be used when searching on a USB bus signal. The search number is specified by x. The search condition must be set to DATA.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:OFFSet?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:OFFSet?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:OFFSet valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:OFFSet <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:OFFSet?
Info
<NR1>specifies the data offset in bytes.
SearchSearchItemTriggerABusUsbDataQualifier
¶
Bases: SCPICmdWrite
The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:QUALifier command.
Description
- This command sets or queries the qualifier to be used when searching on a USB bus signal. The search condition must be set to IDANDDATA OR DATA. The search number is specified by x.
Usage
- Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:QUALifier valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:QUALifier {EQual|UNEQual|LESSthan|MOREthan|LESSEQual|MOREEQual|INrange|OUTrange}
Info
EQUalspecifies the qualifier as Equal.INrangespecifies the qualifier as Inside Range.LESSEQualspecifies the qualifier as Less Than or Equal to.MOREEQualspecifies the qualifier as More Than or Equal to.OUTrangespecifies the qualifier as Out of Range.UNEQualspecifies the qualifier as Unequal.LESSThanspecifies the qualifier as Less Than.MOREThanspecifies the qualifier as More Than.
SearchSearchItemTriggerABusUsbDataSize
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:SIZe command.
Description
- This command sets or queries the length of the data string, in bytes, used for a USB bus search to determine where to place a mark. The search number is specified by x. The search condition must be set to DATA.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:SIZe?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:SIZe?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:SIZe valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:SIZe <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:SIZe?
Info
<NR1>specifies the data size in bytes.
SearchSearchItemTriggerABusUsbDataType
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:TYPe command.
Description
- This command sets or queries the data packet type for the specified USB bus trigger search
to determine where to place a mark.
is the search number.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:TYPe?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:TYPe?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:TYPe valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:TYPe {ANY|DATA<x>|MDATA}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:TYPe?
Info
ANYspecifies the data packet type as Any.DATA0specifies the data packet type as DATA0.DATA1specifies the data packet type as DATA1.DATA2specifies the data packet type as DATA2.MDATAspecifies the data packet type as MDATA.
SearchSearchItemTriggerABusUsbDataValue
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:VALue command.
Description
- This command sets or queries the binary data value used for a USB bus search to determine where to place a mark. The search number is specified by x. The search condition must be set to DATA.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:VALue?
Info
<QString>specifies the data value. The valid characters are 0, 1, and X for binary format; and A-F, 0-9, and X for hexadecimal format.
SearchSearchItemTriggerABusUsbEndpoint
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ENDPoint command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ENDPoint?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ENDPoint?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ENDPoint:VALuecommand.
value
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ENDPoint:VALue command.
Description
- This command sets or queries the endpoint binary value used for a USB bus search to determine where to place a mark. The search number is specified by x. The search condition must be set to TOKEN.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ENDPoint:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ENDPoint:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ENDPoint:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ENDPoint:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ENDPoint:VALue?
Info
<QString>specifies the data value in the specified valid format. The valid characters are 0, 1, and X for binary format; A-F, 0-9 and X for hexadecimal format.
SearchSearchItemTriggerABusUsbEndpointValue
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ENDPoint:VALue command.
Description
- This command sets or queries the endpoint binary value used for a USB bus search to determine where to place a mark. The search number is specified by x. The search condition must be set to TOKEN.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ENDPoint:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ENDPoint:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ENDPoint:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ENDPoint:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ENDPoint:VALue?
Info
<QString>specifies the data value in the specified valid format. The valid characters are 0, 1, and X for binary format; A-F, 0-9 and X for hexadecimal format.
SearchSearchItemTriggerABusUsbErrtype
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ERRTYPE command.
Description
- This command sets or queries the error type for the specified USB bus trigger search to
determine where to place a mark.
is the search number.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ERRTYPE?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ERRTYPE?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ERRTYPE valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ERRTYPE {BITSTUFFing|CRC5|CRC16|PID}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ERRTYPE?
Info
BITSTUFFingspecifies the error type as Bit Stuffing.CRC5specifies the error type as Token CRC5 (Cyclic Redundancy Check 5).CRC16specifies the error type as Data CRC16 (Cyclic Redundancy Check 16).PIDspecifies the error type as PID Check Bits.
SearchSearchItemTriggerABusUsbHandshaketype
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:HANDSHAKEType command.
Description
- This command sets or queries the handshake type for the specified USB bus trigger search
to determine where to place a mark.
is the search number.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:USB:HANDSHAKEType?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:USB:HANDSHAKEType?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:USB:HANDSHAKEType valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:HANDSHAKEType {ACK|ANY|NAK|NYET|STALL}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:HANDSHAKEType?
Info
ACKspecifies the handshake type as Acknowledgement (positive) (XX10).ANYspecifies the handshake type as Any (0010).NAKspecifies the handshake type as Negative Acknowledgment (1010).NYETspecifies the handshake type as No response Yet (0110).STALLspecifies the handshake type as Stall (endpoint is halted or control pipe request not supported) (1110).
SearchSearchItemTriggerABusUsbSofframenumber
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SOFFRAMENUMber command.
Description
- This command sets or queries the frame number string to use for the Start of Frame for the specified USB bus trigger search to determine where to place a mark. The search number is specified by x. The search condition must be set to TOKEN.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SOFFRAMENUMber?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SOFFRAMENUMber?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SOFFRAMENUMber valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SOFFRAMENUMber <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SOFFRAMENUMber?
Info
<QString>specifies the frame number string for the Start of Frame in a valid format (binary, hexadecimal, or symbolic).
SearchSearchItemTriggerABusUsbSpecialtype
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPECIALType command.
Description
- This command sets or queries the USB search type for the specified USB bus trigger search to determine where to place a mark. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPECIALType?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPECIALType?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPECIALType valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPECIALType {ANY|ERROr|PING|PREamble|RESERVed|SPLit}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPECIALType?
Info
ANYspecifies the PID value as Any (XX00).ERROrspecifies the PID value as ERR (1100).PINGspecifies the PID value as PING (0100).PREamblespecifies the PID value as PRE (1100).RESERVedspecifies the PID value as Reserved (0000).SPLitspecifies the PID value as Split (1000).
SearchSearchItemTriggerABusUsbSplit
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.et: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:ETcommand tree..hub: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:HUBcommand tree..port: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:PORTcommand tree..sc: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:SCcommand tree..se: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:SEcommand tree.
et
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:ET command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:ET?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:ET?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:ET:VALuecommand.
hub
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:HUB command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:HUB?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:HUB?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:HUB:VALuecommand.
port
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:PORT command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:PORT?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:PORT?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:PORT:VALuecommand.
sc
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:SC command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:SC?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:SC?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:SC:VALuecommand.
se
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:SE command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:SE?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:SE?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:SE:VALuecommand.
SearchSearchItemTriggerABusUsbSplitEt
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:ET command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:ET?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:ET?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:ET:VALuecommand.
value
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:ET:VALue command.
Description
- This command sets or queries the Endpoint Type value for the specified USB bus trigger search on split token field to determine where to place a mark. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:ET:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:ET:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:ET:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:ET:VALue {BULK|CONTROL|NOCARE|INTERRUPT|ISOchronous}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:ET:VALue?
Info
BULKspecifies the Endpoint Type value as Bulk (10).CONTROLspecifies the Endpoint Type value as Control (00).NOCAREspecifies the Endpoint Type value as Don’t Care.INTERRUPTspecifies the Endpoint Type value as Interrupt (11).ISOchronousspecifies the Endpoint Type value as Isochronous (01).
SearchSearchItemTriggerABusUsbSplitEtValue
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:ET:VALue command.
Description
- This command sets or queries the Endpoint Type value for the specified USB bus trigger search on split token field to determine where to place a mark. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:ET:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:ET:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:ET:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:ET:VALue {BULK|CONTROL|NOCARE|INTERRUPT|ISOchronous}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:ET:VALue?
Info
BULKspecifies the Endpoint Type value as Bulk (10).CONTROLspecifies the Endpoint Type value as Control (00).NOCAREspecifies the Endpoint Type value as Don’t Care.INTERRUPTspecifies the Endpoint Type value as Interrupt (11).ISOchronousspecifies the Endpoint Type value as Isochronous (01).
SearchSearchItemTriggerABusUsbSplitHub
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:HUB command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:HUB?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:HUB?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:HUB:VALuecommand.
value
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:HUB:VALue command.
Description
- This command sets or queries the binary hub address value to be used when searching on a USB bus signal. The search number is specified by x. The search condition must be set to Special with packet type SPLIT.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:HUB:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:HUB:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:HUB:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:HUB:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:HUB:VALue?
Info
<QString>specifies the hub address. The valid characters are .
SearchSearchItemTriggerABusUsbSplitHubValue
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:HUB:VALue command.
Description
- This command sets or queries the binary hub address value to be used when searching on a USB bus signal. The search number is specified by x. The search condition must be set to Special with packet type SPLIT.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:HUB:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:HUB:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:HUB:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:HUB:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:HUB:VALue?
Info
<QString>specifies the hub address. The valid characters are .
SearchSearchItemTriggerABusUsbSplitPort
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:PORT command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:PORT?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:PORT?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:PORT:VALuecommand.
value
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:PORT:VALue command.
Description
- This command sets or queries the binary port address used when searching on a USB bus signal. The search number is specified by x. The search condition must be set to Special with a packet type SPLIT.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:PORT:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:PORT:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:PORT:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:PORT:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:PORT:VALue?
Info
<QString>specifies the port address in the valid format. The valid characters are.
SearchSearchItemTriggerABusUsbSplitPortValue
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:PORT:VALue command.
Description
- This command sets or queries the binary port address used when searching on a USB bus signal. The search number is specified by x. The search condition must be set to Special with a packet type SPLIT.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:PORT:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:PORT:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:PORT:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:PORT:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:PORT:VALue?
Info
<QString>specifies the port address in the valid format. The valid characters are.
SearchSearchItemTriggerABusUsbSplitSc
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:SC command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:SC?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:SC?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:SC:VALuecommand.
value
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:SC:VALue command.
Description
- This command sets or queries the Start/Complete value for the specified USB bus trigger on split token field search to determine where to place a mark. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:SC:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:SC:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:SC:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:SC:VALue {CSPLIT|NOCARE|SSPLIT}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:SC:VALue?
Info
CSPLITspecifies Complete (CSPLIT)(1) Start/Complete value.NOCAREspecifies the Start/Complete value as Don’t Care (X).SSPLITspecifies Start (SSPLIT) (0) Start/Complete value.
SearchSearchItemTriggerABusUsbSplitScValue
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:SC:VALue command.
Description
- This command sets or queries the Start/Complete value for the specified USB bus trigger on split token field search to determine where to place a mark. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:SC:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:SC:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:SC:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:SC:VALue {CSPLIT|NOCARE|SSPLIT}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:SC:VALue?
Info
CSPLITspecifies Complete (CSPLIT)(1) Start/Complete value.NOCAREspecifies the Start/Complete value as Don’t Care (X).SSPLITspecifies Start (SSPLIT) (0) Start/Complete value.
SearchSearchItemTriggerABusUsbSplitSe
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:SE command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:SE?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:SE?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.value: TheSEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:SE:VALuecommand.
value
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:SE:VALue command.
Description
- This command sets or queries the Start/End value for the specified USB bus trigger on split token field search to determine where to place a mark. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:SE:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:SE:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:SE:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:SE:VALue {NOCARE|FULLSPEED|ISOALL|ISOEND|ISOMID|ISOSTART|LOWSPEED}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:SE:VALue?
Info
NOCAREspecifies Don’t Care (X) Start/End bit value.FULLSPEEDspecifies Control/Bulk/Interrupt Full Speed device (0X) Start/End bit value.ISOALLspecifies Isochronous Data is All (11) Start/End bit value.ISOENDspecifies Isochronous Data is End (01) Start/End bit value.ISOMIDspecifies Isochronous Data is Middle (00) Start/End bit value.ISOSTARTspecifies Isochronous Data is Start (10) Start/End bit value.LOWSPEEDspecifies Control/Bulk/Interrupt Low Speed device (1X) Start/End bit value.
SearchSearchItemTriggerABusUsbSplitSeValue
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:SE:VALue command.
Description
- This command sets or queries the Start/End value for the specified USB bus trigger on split token field search to determine where to place a mark. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:SE:VALue?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:SE:VALue?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:SE:VALue valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:SE:VALue {NOCARE|FULLSPEED|ISOALL|ISOEND|ISOMID|ISOSTART|LOWSPEED}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:SE:VALue?
Info
NOCAREspecifies Don’t Care (X) Start/End bit value.FULLSPEEDspecifies Control/Bulk/Interrupt Full Speed device (0X) Start/End bit value.ISOALLspecifies Isochronous Data is All (11) Start/End bit value.ISOENDspecifies Isochronous Data is End (01) Start/End bit value.ISOMIDspecifies Isochronous Data is Middle (00) Start/End bit value.ISOSTARTspecifies Isochronous Data is Start (10) Start/End bit value.LOWSPEEDspecifies Control/Bulk/Interrupt Low Speed device (1X) Start/End bit value.
SearchSearchItemTriggerABusUsbTokentype
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:TOKENType command.
Description
- This command sets or queries the token type when the specified USB bus trigger search to
determine where to place a mark.
is the search number.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:USB:TOKENType?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:USB:TOKENType?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:BUS:USB:TOKENType valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:TOKENType {ANY|IN|OUT|SETUP|SOF}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:TOKENType?
Info
ANYspecifies the token type as Any (XX01).INspecifies the token type as IN (1001).OUTspecifies the token type as OUT (0001).SETUPspecifies the token type as SETUP (1101).SOFspecifies the token type as Start Of Frame (0101).
SearchSearchItemTriggerADdrread
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:DDRREAD command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREAD?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREAD?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.burstdetectmethod: TheSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:BURSTDETectmethodcommand..burstlength: TheSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:BURSTLENGTHcommand..burstlatency: TheSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:BURSTLatencycommand..csactive: TheSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:CSActivecommand..cslevel: TheSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:CSLevelcommand..csmode: TheSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:CSModecommand..cssource: TheSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:CSSourcecommand..datarate: TheSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:DATARatecommand..datasource: TheSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:DATASourcecommand..hysteresis: TheSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:HYSteresiscommand..logic1source: TheSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:LOGIC1SOUrcecommand tree..logic2source: TheSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:LOGIC2SOUrcecommand tree..logic3source: TheSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:LOGIC3SOUrcecommand tree..logic4source: TheSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:LOGIC4SOUrcecommand tree..margin: TheSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:MARgincommand..maxcas: TheSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:MAXCAScommand..mincas: TheSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:MINCascommand..postamble: TheSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:POSTAMBLEcommand tree..preamble: TheSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:PREAMBLEcommand tree..reflevelmode: TheSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:REFLEVELModecommand..reflevel: TheSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:REFLevelcommand tree..standard: TheSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:STANdardcommand..strobesource: TheSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:STROBESourcecommand..tolerance: TheSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:TOLERancecommand.
burstdetectmethod
property
¶
burstdetectmethod: SearchSearchItemTriggerADdrreadBurstdetectmethod
Return the SEARCH:SEARCH<x>:TRIGger:A:DDRREAD:BURSTDETectmethod command.
Description
- This command sets or queries the DDRRead search burst detection method.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:BURSTDETectmethod?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:BURSTDETectmethod?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:BURSTDETectmethod valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:DDRREAD:BURSTDETectmethod {DQDQS|ChipSelect|LogicState}
- SEARCH:SEARCH<x>:TRIGger:A:DDRREAD:BURSTDETectmethod?
Info
DQDQSsets the burst detection method to DQDQS.ChipSelectsets the burst detection method to ChipSelect.LogicStatesets the burst detection method to LogicState.
burstlatency
property
¶
burstlatency: SearchSearchItemTriggerADdrreadBurstlatency
Return the SEARCH:SEARCH<x>:TRIGger:A:DDRREAD:BURSTLatency command.
Description
- This command sets or queries the DDR read logic state burst latency value.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:BURSTLatency?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:BURSTLatency?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:BURSTLatency valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:DDRREAD:BURSTLatency <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:DDRREAD:BURSTLatency?
Info
SEARCH<x>specifies the search number.NR3sets the logic state burst latency value.
burstlength
property
¶
burstlength: SearchSearchItemTriggerADdrreadBurstlength
Return the SEARCH:SEARCH<x>:TRIGger:A:DDRREAD:BURSTLENGTH command.
Description
- This command sets or queries the DDR read logic state burst length value.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:BURSTLENGTH?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:BURSTLENGTH?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:BURSTLENGTH valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:DDRREAD:BURSTLENGTH <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:DDRREAD:BURSTLENGTH?
Info
SEARCH<x>specifies the search number.NR1sets the logic state burst length value.
csactive
property
¶
csactive: SearchSearchItemTriggerADdrreadCsactive
Return the SEARCH:SEARCH<x>:TRIGger:A:DDRREAD:CSActive command.
Description
- This command sets or queries the DDR Read chip select active state.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:CSActive?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:CSActive?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:CSActive valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:DDRREAD:CSActive {LOW|HIGH}
- SEARCH:SEARCH<x>:TRIGger:A:DDRREAD:CSActive?
Info
SEARCH<x>specifies the search number.LOWsets the DDR read chip select active state to low.HIGHsets the DDR read chip select active state to high.
cslevel
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:DDRREAD:CSLevel command.
Description
- This command sets or queries the DDR Read chip select level value.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:CSLevel?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:CSLevel?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:CSLevel valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:DDRREAD:CSLevel <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:DDRREAD:CSLevel?
Info
SEARCH<x>specifies the search number.NR3sets the DDR read chip select level value.
csmode
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:DDRREAD:CSMode command.
Description
- This command sets or queries the DDR Read chip select mode.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:CSMode?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:CSMode?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:CSMode valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:DDRREAD:CSMode {Auto|Manual}
- SEARCH:SEARCH<x>:TRIGger:A:DDRREAD:CSMode?
Info
SEARCH<x>specifies the search number.Autosets the DDR read chip select mode to auto.Manualsets the DDR read chip select mode to manual. Use the Related Commands to set the Reference levels when in Manual mode.
cssource
property
¶
cssource: SearchSearchItemTriggerADdrreadCssource
Return the SEARCH:SEARCH<x>:TRIGger:A:DDRREAD:CSSource command.
Description
- This command sets or queries the DDR Read search chip select source.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:CSSource?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:CSSource?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:CSSource valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:DDRREAD:CSSource {S<x>_Ch<x>_D<x>|CH<x>|CH<x>_D<x>|Math<x>|REF<x>|REF<x>_D<x>}
- SEARCH:SEARCH<x>:TRIGger:A:DDRREAD:CSSource?
Info
SEARCH<x>specifies the search number.S<x>_Ch<x>_D<x>specifies is the remote scope number, the analog channel and the digital channel.CH<x>specifies channelas the DDR read chip select source for the specified search . CH<x>_D<x>specifies digital waveformof channel as the DDR read strobe source for the specified search . Math<x>specifies math waveformas the DDR read chip select source for the specified search . REF<x>specifies reference waveformas the DDR read chip select source for the specified search . REF<x>_D<x>specifies digital waveformof reference waveform as the DDR read strobe source for the specified search .
datarate
property
¶
datarate: SearchSearchItemTriggerADdrreadDatarate
Return the SEARCH:SEARCH<x>:TRIGger:A:DDRREAD:DATARate command.
Description
- This command sets or queries the DDR read search data rate for DDR3 and LPDRR3 standards of the specified search.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:DATARate?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:DATARate?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:DATARate valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:DDRREAD:DATARate {333|800|1066|1200|1333|1466|1600|1866|2133}
- SEARCH:SEARCH<x>:TRIGger:A:DDRREAD:DATARate?
Info
333sets the data rate to 333.800sets the data rate to 800.1066sets the data rate to 1066.1200sets the data rate to 1200.1333sets the data rate to 1333.1466sets the data rate to 1466.1600sets the data rate to 1600.1866sets the data rate to 1866.2133sets the data rate to 2133.
datasource
property
¶
datasource: SearchSearchItemTriggerADdrreadDatasource
Return the SEARCH:SEARCH<x>:TRIGger:A:DDRREAD:DATASource command.
Description
- This command sets or queries the DDR read data source when the search type is DDR READ.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:DATASource?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:DATASource?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:DATASource valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:DDRREAD:DATASource {CH<x>|CH<x>_D<x<|Math<x>|REF<x>|REF<x>_D<x>}
- SEARCH:SEARCH<x>:TRIGger:A:DDRREAD:DATASource?
Info
CH<x>specifies channelas the DDR read data source for the specified search . CH<x>_D<x>specifies digital waveformof channel as the DDR read data source for the specified search . Math<x>specifies math waveformas the DDR read data source for the specified search . REF<x>specifies reference waveformas the DDR read data source for the specified search . REF<x>_D<x>specifies digital waveformof reference waveform as the DDR read data source for the specified search .
hysteresis
property
¶
hysteresis: SearchSearchItemTriggerADdrreadHysteresis
Return the SEARCH:SEARCH<x>:TRIGger:A:DDRREAD:HYSteresis command.
Description
- This command sets or queries the DDR read hysteresis reference level value, when the search type is DDR READ.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:HYSteresis?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:HYSteresis?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:HYSteresis valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:DDRREAD:HYSteresis <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:DDRREAD:HYSteresis?
Info
NR3sets the DDR read search hysteresis percent value in the range of 0% to 50%.
logic1source
property
¶
logic1source: SearchSearchItemTriggerADdrreadLogic1source
Return the SEARCH:SEARCH<x>:TRIGger:A:DDRREAD:LOGIC1SOUrce command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:LOGIC1SOUrce?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:LOGIC1SOUrce?query and raise an AssertionError if the returned value does not matchvalue.
Info
SEARCH<x>specifies the search number.
Sub-properties
.symbol: TheSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:LOGIC1SOUrce:SYMBolcommand.
logic2source
property
¶
logic2source: SearchSearchItemTriggerADdrreadLogic2source
Return the SEARCH:SEARCH<x>:TRIGger:A:DDRREAD:LOGIC2SOUrce command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:LOGIC2SOUrce?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:LOGIC2SOUrce?query and raise an AssertionError if the returned value does not matchvalue.
Info
SEARCH<x>specifies the search number.
Sub-properties
.symbol: TheSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:LOGIC2SOUrce:SYMBolcommand.
logic3source
property
¶
logic3source: SearchSearchItemTriggerADdrreadLogic3source
Return the SEARCH:SEARCH<x>:TRIGger:A:DDRREAD:LOGIC3SOUrce command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:LOGIC3SOUrce?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:LOGIC3SOUrce?query and raise an AssertionError if the returned value does not matchvalue.
Info
SEARCH<x>specifies the search number.
Sub-properties
.symbol: TheSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:LOGIC3SOUrce:SYMBolcommand.
logic4source
property
¶
logic4source: SearchSearchItemTriggerADdrreadLogic4source
Return the SEARCH:SEARCH<x>:TRIGger:A:DDRREAD:LOGIC4SOUrce command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:LOGIC4SOUrce?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:LOGIC4SOUrce?query and raise an AssertionError if the returned value does not matchvalue.
Info
SEARCH<x>specifies the search number.
Sub-properties
.symbol: TheSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:LOGIC4SOUrce:SYMBolcommand.
margin
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:DDRREAD:MARgin command.
Description
- This command sets or queries the DDR read margin reference level value, when the search type is DDR READ.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:MARgin?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:MARgin?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:MARgin valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:DDRREAD:MARgin <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:DDRREAD:MARgin?
Info
NR3sets the DDR read search margin percent value in the range of 0% to 100%.
maxcas
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:DDRREAD:MAXCAS command.
Description
- This command sets or queries the DDR read chip maximum Column Access Strobe (CAS) value.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:MAXCAS?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:MAXCAS?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:MAXCAS valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:DDRREAD:MAXCAS <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:DDRREAD:MAXCAS?
Info
SEARCH<x>specifies the search number.NR3sets the DDR read chip select CAS maximum value.
mincas
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:DDRREAD:MINCas command.
Description
- This command sets or queries the DDR read chip minimum Column Access Strobe (CAS) value.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:MINCas?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:MINCas?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:MINCas valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:DDRREAD:MINCas <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:DDRREAD:MINCas?
Info
SEARCH<x>specifies the search number.NR3sets the DDR read chip select CAS minimum value.
postamble
property
¶
postamble: SearchSearchItemTriggerADdrreadPostamble
Return the SEARCH:SEARCH<x>:TRIGger:A:DDRREAD:POSTAMBLE command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:POSTAMBLE?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:POSTAMBLE?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.length: TheSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:POSTAMBLE:LENGthcommand.
preamble
property
¶
preamble: SearchSearchItemTriggerADdrreadPreamble
Return the SEARCH:SEARCH<x>:TRIGger:A:DDRREAD:PREAMBLE command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:PREAMBLE?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:PREAMBLE?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.type: TheSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:PREAMBLE:TYPEcommand.
reflevel
property
¶
reflevel: SearchSearchItemTriggerADdrreadReflevel
Return the SEARCH:SEARCH<x>:TRIGger:A:DDRREAD:REFLevel command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:REFLevel?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:REFLevel?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.data: TheSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:REFLevel:DATAcommand tree..strobe: TheSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:REFLevel:STROBEcommand tree.
reflevelmode
property
¶
reflevelmode: SearchSearchItemTriggerADdrreadReflevelmode
Return the SEARCH:SEARCH<x>:TRIGger:A:DDRREAD:REFLEVELMode command.
Description
- This command sets or queries the DDR read reference level mode to auto or manual, when the search type is DDR READ.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:REFLEVELMode?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:REFLEVELMode?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:REFLEVELMode valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:DDRREAD:REFLEVELMode {AUTO|MANUAL}
- SEARCH:SEARCH<x>:TRIGger:A:DDRREAD:REFLEVELMode?
Info
AUTOsets the DDR read reference level mode to auto.MANUALsets the DDR read reference level mode to manual. Use the Related Commands to set the Reference levels when in Manual mode.
standard
property
¶
standard: SearchSearchItemTriggerADdrreadStandard
Return the SEARCH:SEARCH<x>:TRIGger:A:DDRREAD:STANdard command.
Description
- This command sets or queries the DDR read search standard as DDR3 or LPDDR3.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:STANdard?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:STANdard?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:STANdard valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:DDRREAD:STANdard {DDR3|LPDDR3}
- SEARCH:SEARCH<x>:TRIGger:A:DDRREAD:STANdard?
Info
DDR3sets the DDR read search standard as DDR3.LPDDR3sets the DDR read search standard as LPDDR3.
strobesource
property
¶
strobesource: SearchSearchItemTriggerADdrreadStrobesource
Return the SEARCH:SEARCH<x>:TRIGger:A:DDRREAD:STROBESource command.
Description
- This command sets or queries the DDR read strobe source when the search type is DDR READ.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:STROBESource?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:STROBESource?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:STROBESource valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:DDRREAD:STROBESource {CH<x>|CH<x>_D<x<|Math<x>|REF<x>|REF<x>_D<x>}
- SEARCH:SEARCH<x>:TRIGger:A:DDRREAD:STROBESource?
Info
CH<x>specifies channelas the DDR read strobe trigger source for the specified search . CH<x>_D<x>specifies digital waveformof channel as the DDR read strobe trigger source for the specified search . Math<x>specifies math waveformas the DDR read strobe trigger source for the specified search . REF<x>specifies reference waveformas the DDR read strobe trigger source for the specified search . REF<x>_D<x>specifies digital waveformof reference waveform as the DDR read strobe trigger source for the specified search .
tolerance
property
¶
tolerance: SearchSearchItemTriggerADdrreadTolerance
Return the SEARCH:SEARCH<x>:TRIGger:A:DDRREAD:TOLERance command.
Description
- This command sets or queries the DDR read logic state tolerance value.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:TOLERance?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:TOLERance?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:TOLERance valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:DDRREAD:TOLERance <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:DDRREAD:TOLERance?
Info
SEARCH<x>specifies the search number.NR3sets the logic state tolerance value.
SearchSearchItemTriggerADdrreadBurstdetectmethod
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:DDRREAD:BURSTDETectmethod command.
Description
- This command sets or queries the DDRRead search burst detection method.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:BURSTDETectmethod?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:BURSTDETectmethod?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:BURSTDETectmethod valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:DDRREAD:BURSTDETectmethod {DQDQS|ChipSelect|LogicState}
- SEARCH:SEARCH<x>:TRIGger:A:DDRREAD:BURSTDETectmethod?
Info
DQDQSsets the burst detection method to DQDQS.ChipSelectsets the burst detection method to ChipSelect.LogicStatesets the burst detection method to LogicState.
SearchSearchItemTriggerADdrreadBurstlatency
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:DDRREAD:BURSTLatency command.
Description
- This command sets or queries the DDR read logic state burst latency value.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:BURSTLatency?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:BURSTLatency?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:BURSTLatency valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:DDRREAD:BURSTLatency <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:DDRREAD:BURSTLatency?
Info
SEARCH<x>specifies the search number.NR3sets the logic state burst latency value.
SearchSearchItemTriggerADdrreadBurstlength
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:DDRREAD:BURSTLENGTH command.
Description
- This command sets or queries the DDR read logic state burst length value.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:BURSTLENGTH?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:BURSTLENGTH?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:BURSTLENGTH valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:DDRREAD:BURSTLENGTH <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:DDRREAD:BURSTLENGTH?
Info
SEARCH<x>specifies the search number.NR1sets the logic state burst length value.
SearchSearchItemTriggerADdrreadCsactive
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:DDRREAD:CSActive command.
Description
- This command sets or queries the DDR Read chip select active state.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:CSActive?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:CSActive?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:CSActive valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:DDRREAD:CSActive {LOW|HIGH}
- SEARCH:SEARCH<x>:TRIGger:A:DDRREAD:CSActive?
Info
SEARCH<x>specifies the search number.LOWsets the DDR read chip select active state to low.HIGHsets the DDR read chip select active state to high.
SearchSearchItemTriggerADdrreadCslevel
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:DDRREAD:CSLevel command.
Description
- This command sets or queries the DDR Read chip select level value.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:CSLevel?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:CSLevel?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:CSLevel valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:DDRREAD:CSLevel <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:DDRREAD:CSLevel?
Info
SEARCH<x>specifies the search number.NR3sets the DDR read chip select level value.
SearchSearchItemTriggerADdrreadCsmode
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:DDRREAD:CSMode command.
Description
- This command sets or queries the DDR Read chip select mode.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:CSMode?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:CSMode?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:CSMode valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:DDRREAD:CSMode {Auto|Manual}
- SEARCH:SEARCH<x>:TRIGger:A:DDRREAD:CSMode?
Info
SEARCH<x>specifies the search number.Autosets the DDR read chip select mode to auto.Manualsets the DDR read chip select mode to manual. Use the Related Commands to set the Reference levels when in Manual mode.
SearchSearchItemTriggerADdrreadCssource
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:DDRREAD:CSSource command.
Description
- This command sets or queries the DDR Read search chip select source.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:CSSource?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:CSSource?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:CSSource valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:DDRREAD:CSSource {S<x>_Ch<x>_D<x>|CH<x>|CH<x>_D<x>|Math<x>|REF<x>|REF<x>_D<x>}
- SEARCH:SEARCH<x>:TRIGger:A:DDRREAD:CSSource?
Info
SEARCH<x>specifies the search number.S<x>_Ch<x>_D<x>specifies is the remote scope number, the analog channel and the digital channel.CH<x>specifies channelas the DDR read chip select source for the specified search . CH<x>_D<x>specifies digital waveformof channel as the DDR read strobe source for the specified search . Math<x>specifies math waveformas the DDR read chip select source for the specified search . REF<x>specifies reference waveformas the DDR read chip select source for the specified search . REF<x>_D<x>specifies digital waveformof reference waveform as the DDR read strobe source for the specified search .
SearchSearchItemTriggerADdrreadDatarate
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:DDRREAD:DATARate command.
Description
- This command sets or queries the DDR read search data rate for DDR3 and LPDRR3 standards of the specified search.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:DATARate?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:DATARate?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:DATARate valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:DDRREAD:DATARate {333|800|1066|1200|1333|1466|1600|1866|2133}
- SEARCH:SEARCH<x>:TRIGger:A:DDRREAD:DATARate?
Info
333sets the data rate to 333.800sets the data rate to 800.1066sets the data rate to 1066.1200sets the data rate to 1200.1333sets the data rate to 1333.1466sets the data rate to 1466.1600sets the data rate to 1600.1866sets the data rate to 1866.2133sets the data rate to 2133.
SearchSearchItemTriggerADdrreadDatasource
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:DDRREAD:DATASource command.
Description
- This command sets or queries the DDR read data source when the search type is DDR READ.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:DATASource?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:DATASource?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:DATASource valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:DDRREAD:DATASource {CH<x>|CH<x>_D<x<|Math<x>|REF<x>|REF<x>_D<x>}
- SEARCH:SEARCH<x>:TRIGger:A:DDRREAD:DATASource?
Info
CH<x>specifies channelas the DDR read data source for the specified search . CH<x>_D<x>specifies digital waveformof channel as the DDR read data source for the specified search . Math<x>specifies math waveformas the DDR read data source for the specified search . REF<x>specifies reference waveformas the DDR read data source for the specified search . REF<x>_D<x>specifies digital waveformof reference waveform as the DDR read data source for the specified search .
SearchSearchItemTriggerADdrreadHysteresis
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:DDRREAD:HYSteresis command.
Description
- This command sets or queries the DDR read hysteresis reference level value, when the search type is DDR READ.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:HYSteresis?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:HYSteresis?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:HYSteresis valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:DDRREAD:HYSteresis <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:DDRREAD:HYSteresis?
Info
NR3sets the DDR read search hysteresis percent value in the range of 0% to 50%.
SearchSearchItemTriggerADdrreadLogic1source
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:DDRREAD:LOGIC1SOUrce command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:LOGIC1SOUrce?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:LOGIC1SOUrce?query and raise an AssertionError if the returned value does not matchvalue.
Info
SEARCH<x>specifies the search number.
Properties
.symbol: TheSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:LOGIC1SOUrce:SYMBolcommand.
symbol
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:DDRREAD:LOGIC1SOUrce:SYMBol command.
Description
- This command sets or queries the DDR read logic source 1 symbol.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:LOGIC1SOUrce:SYMBol?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:LOGIC1SOUrce:SYMBol?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:LOGIC1SOUrce:SYMBol valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:DDRREAD:LOGIC1SOUrce:SYMBol {H|L|X}
- SEARCH:SEARCH<x>:TRIGger:A:DDRREAD:LOGIC1SOUrce:SYMBol?
Info
SEARCH<x>specifies the search number.Hsets the logic source 1 symbol to H (High).Lsets the logic source 1 symbol to L (Low).Xsets the logic source 1 symbol to X (Don’t care).
SearchSearchItemTriggerADdrreadLogic1sourceSymbol
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:DDRREAD:LOGIC1SOUrce:SYMBol command.
Description
- This command sets or queries the DDR read logic source 1 symbol.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:LOGIC1SOUrce:SYMBol?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:LOGIC1SOUrce:SYMBol?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:LOGIC1SOUrce:SYMBol valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:DDRREAD:LOGIC1SOUrce:SYMBol {H|L|X}
- SEARCH:SEARCH<x>:TRIGger:A:DDRREAD:LOGIC1SOUrce:SYMBol?
Info
SEARCH<x>specifies the search number.Hsets the logic source 1 symbol to H (High).Lsets the logic source 1 symbol to L (Low).Xsets the logic source 1 symbol to X (Don’t care).
SearchSearchItemTriggerADdrreadLogic2source
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:DDRREAD:LOGIC2SOUrce command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:LOGIC2SOUrce?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:LOGIC2SOUrce?query and raise an AssertionError if the returned value does not matchvalue.
Info
SEARCH<x>specifies the search number.
Properties
.symbol: TheSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:LOGIC2SOUrce:SYMBolcommand.
symbol
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:DDRREAD:LOGIC2SOUrce:SYMBol command.
Description
- This command sets or queries the DDR read logic source 2 symbol.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:LOGIC2SOUrce:SYMBol?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:LOGIC2SOUrce:SYMBol?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:LOGIC2SOUrce:SYMBol valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:DDRREAD:LOGIC2SOUrce:SYMBol {H|L|X}
- SEARCH:SEARCH<x>:TRIGger:A:DDRREAD:LOGIC2SOUrce:SYMBol?
Info
SEARCH<x>specifies the search number.Hsets the logic source 2 symbol to H (High).Lsets the logic source 2 symbol to L (Low).Xsets the logic source 2 symbol to X (Don’t care).
SearchSearchItemTriggerADdrreadLogic2sourceSymbol
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:DDRREAD:LOGIC2SOUrce:SYMBol command.
Description
- This command sets or queries the DDR read logic source 2 symbol.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:LOGIC2SOUrce:SYMBol?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:LOGIC2SOUrce:SYMBol?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:LOGIC2SOUrce:SYMBol valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:DDRREAD:LOGIC2SOUrce:SYMBol {H|L|X}
- SEARCH:SEARCH<x>:TRIGger:A:DDRREAD:LOGIC2SOUrce:SYMBol?
Info
SEARCH<x>specifies the search number.Hsets the logic source 2 symbol to H (High).Lsets the logic source 2 symbol to L (Low).Xsets the logic source 2 symbol to X (Don’t care).
SearchSearchItemTriggerADdrreadLogic3source
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:DDRREAD:LOGIC3SOUrce command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:LOGIC3SOUrce?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:LOGIC3SOUrce?query and raise an AssertionError if the returned value does not matchvalue.
Info
SEARCH<x>specifies the search number.
Properties
.symbol: TheSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:LOGIC3SOUrce:SYMBolcommand.
symbol
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:DDRREAD:LOGIC3SOUrce:SYMBol command.
Description
- This command sets or queries the DDR read logic source 3 symbol.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:LOGIC3SOUrce:SYMBol?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:LOGIC3SOUrce:SYMBol?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:LOGIC3SOUrce:SYMBol valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:DDRREAD:LOGIC3SOUrce:SYMBol {H|L|X}
- SEARCH:SEARCH<x>:TRIGger:A:DDRREAD:LOGIC3SOUrce:SYMBol?
Info
SEARCH<x>specifies the search number.Hsets the logic source 3 symbol to H (High).Lsets the logic source 3 symbol to L (Low).Xsets the logic source 3 symbol to X (Don’t care).
SearchSearchItemTriggerADdrreadLogic3sourceSymbol
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:DDRREAD:LOGIC3SOUrce:SYMBol command.
Description
- This command sets or queries the DDR read logic source 3 symbol.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:LOGIC3SOUrce:SYMBol?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:LOGIC3SOUrce:SYMBol?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:LOGIC3SOUrce:SYMBol valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:DDRREAD:LOGIC3SOUrce:SYMBol {H|L|X}
- SEARCH:SEARCH<x>:TRIGger:A:DDRREAD:LOGIC3SOUrce:SYMBol?
Info
SEARCH<x>specifies the search number.Hsets the logic source 3 symbol to H (High).Lsets the logic source 3 symbol to L (Low).Xsets the logic source 3 symbol to X (Don’t care).
SearchSearchItemTriggerADdrreadLogic4source
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:DDRREAD:LOGIC4SOUrce command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:LOGIC4SOUrce?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:LOGIC4SOUrce?query and raise an AssertionError if the returned value does not matchvalue.
Info
SEARCH<x>specifies the search number.
Properties
.symbol: TheSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:LOGIC4SOUrce:SYMBolcommand.
symbol
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:DDRREAD:LOGIC4SOUrce:SYMBol command.
Description
- This command sets or queries the DDR read logic source 4 symbol.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:LOGIC4SOUrce:SYMBol?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:LOGIC4SOUrce:SYMBol?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:LOGIC4SOUrce:SYMBol valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:DDRREAD:LOGIC4SOUrce:SYMBol {H|L|X}
- SEARCH:SEARCH<x>:TRIGger:A:DDRREAD:LOGIC4SOUrce:SYMBol?
Info
SEARCH<x>specifies the search number.Hsets the logic source 4 symbol to H (High).Lsets the logic source 4 symbol to L (Low).Xsets the logic source 4 symbol to X (Don’t care).
SearchSearchItemTriggerADdrreadLogic4sourceSymbol
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:DDRREAD:LOGIC4SOUrce:SYMBol command.
Description
- This command sets or queries the DDR read logic source 4 symbol.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:LOGIC4SOUrce:SYMBol?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:LOGIC4SOUrce:SYMBol?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:LOGIC4SOUrce:SYMBol valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:DDRREAD:LOGIC4SOUrce:SYMBol {H|L|X}
- SEARCH:SEARCH<x>:TRIGger:A:DDRREAD:LOGIC4SOUrce:SYMBol?
Info
SEARCH<x>specifies the search number.Hsets the logic source 4 symbol to H (High).Lsets the logic source 4 symbol to L (Low).Xsets the logic source 4 symbol to X (Don’t care).
SearchSearchItemTriggerADdrreadMargin
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:DDRREAD:MARgin command.
Description
- This command sets or queries the DDR read margin reference level value, when the search type is DDR READ.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:MARgin?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:MARgin?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:MARgin valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:DDRREAD:MARgin <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:DDRREAD:MARgin?
Info
NR3sets the DDR read search margin percent value in the range of 0% to 100%.
SearchSearchItemTriggerADdrreadMaxcas
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:DDRREAD:MAXCAS command.
Description
- This command sets or queries the DDR read chip maximum Column Access Strobe (CAS) value.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:MAXCAS?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:MAXCAS?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:MAXCAS valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:DDRREAD:MAXCAS <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:DDRREAD:MAXCAS?
Info
SEARCH<x>specifies the search number.NR3sets the DDR read chip select CAS maximum value.
SearchSearchItemTriggerADdrreadMincas
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:DDRREAD:MINCas command.
Description
- This command sets or queries the DDR read chip minimum Column Access Strobe (CAS) value.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:MINCas?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:MINCas?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:MINCas valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:DDRREAD:MINCas <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:DDRREAD:MINCas?
Info
SEARCH<x>specifies the search number.NR3sets the DDR read chip select CAS minimum value.
SearchSearchItemTriggerADdrreadPostamble
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:DDRREAD:POSTAMBLE command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:POSTAMBLE?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:POSTAMBLE?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.length: TheSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:POSTAMBLE:LENGthcommand.
length
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:DDRREAD:POSTAMBLE:LENGth command.
Description
- This command sets or queries the DDR read postamble length when the search type is DDR READ.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:POSTAMBLE:LENGth?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:POSTAMBLE:LENGth?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:POSTAMBLE:LENGth valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:DDRREAD:POSTAMBLE:LENGth {500E-3|500E-1.5|500E-1}
- SEARCH:SEARCH<x>:TRIGger:A:DDRREAD:POSTAMBLE:LENGth?
Info
500E-1.5sets the postamble length to 1.5 tCK (number of clock cycles).500E-1sets the postamble length to 1 tCK (number of clock cycles).500E-3sets the postamble length to 0.5 tCK (number of clock cycles).
SearchSearchItemTriggerADdrreadPostambleLength
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:DDRREAD:POSTAMBLE:LENGth command.
Description
- This command sets or queries the DDR read postamble length when the search type is DDR READ.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:POSTAMBLE:LENGth?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:POSTAMBLE:LENGth?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:POSTAMBLE:LENGth valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:DDRREAD:POSTAMBLE:LENGth {500E-3|500E-1.5|500E-1}
- SEARCH:SEARCH<x>:TRIGger:A:DDRREAD:POSTAMBLE:LENGth?
Info
500E-1.5sets the postamble length to 1.5 tCK (number of clock cycles).500E-1sets the postamble length to 1 tCK (number of clock cycles).500E-3sets the postamble length to 0.5 tCK (number of clock cycles).
SearchSearchItemTriggerADdrreadPreamble
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:DDRREAD:PREAMBLE command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:PREAMBLE?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:PREAMBLE?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.type: TheSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:PREAMBLE:TYPEcommand.
type
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:DDRREAD:PREAMBLE:TYPE command.
Description
- This command sets or queries the DDR read preamble type when the search type is DDR READ.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:PREAMBLE:TYPE?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:PREAMBLE:TYPE?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:PREAMBLE:TYPE valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:DDRREAD:PREAMBLE:TYPE {STATIC|DYNAMIC}
- SEARCH:SEARCH<x>:TRIGger:A:DDRREAD:PREAMBLE:TYPE?
Info
STATICsets the DDR Read preamble type to Static.DYNAMICsets the DDR Read preamble type to Dynamic.
SearchSearchItemTriggerADdrreadPreambleType
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:DDRREAD:PREAMBLE:TYPE command.
Description
- This command sets or queries the DDR read preamble type when the search type is DDR READ.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:PREAMBLE:TYPE?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:PREAMBLE:TYPE?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:PREAMBLE:TYPE valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:DDRREAD:PREAMBLE:TYPE {STATIC|DYNAMIC}
- SEARCH:SEARCH<x>:TRIGger:A:DDRREAD:PREAMBLE:TYPE?
Info
STATICsets the DDR Read preamble type to Static.DYNAMICsets the DDR Read preamble type to Dynamic.
SearchSearchItemTriggerADdrreadReflevel
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:DDRREAD:REFLevel command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:REFLevel?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:REFLevel?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.data: TheSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:REFLevel:DATAcommand tree..strobe: TheSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:REFLevel:STROBEcommand tree.
data
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:DDRREAD:REFLevel:DATA command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:REFLevel:DATA?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:REFLevel:DATA?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.high: TheSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:REFLevel:DATA:HIGHcommand..low: TheSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:REFLevel:DATA:LOWcommand..mid: TheSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:REFLevel:DATA:MIDcommand.
strobe
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:DDRREAD:REFLevel:STROBE command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:REFLevel:STROBE?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:REFLevel:STROBE?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.high: TheSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:REFLevel:STROBE:HIGHcommand..low: TheSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:REFLevel:STROBE:LOWcommand..mid: TheSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:REFLevel:STROBE:MIDcommand.
SearchSearchItemTriggerADdrreadReflevelData
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:DDRREAD:REFLevel:DATA command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:REFLevel:DATA?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:REFLevel:DATA?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.high: TheSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:REFLevel:DATA:HIGHcommand..low: TheSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:REFLevel:DATA:LOWcommand..mid: TheSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:REFLevel:DATA:MIDcommand.
high
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:DDRREAD:REFLevel:DATA:HIGH command.
Description
- This command sets or queries the DDR read data high reference level value, when the search type is DDR READ.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:REFLevel:DATA:HIGH?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:REFLevel:DATA:HIGH?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:REFLevel:DATA:HIGH valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:DDRREAD:REFLevel:DATA:HIGH <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:DDRREAD:REFLevel:DATA:HIGH?
Info
NR3sets the DDR read search data high reference value.
low
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:DDRREAD:REFLevel:DATA:LOW command.
Description
- This command sets or queries the DDR read data low reference level value, when the search type is DDR READ.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:REFLevel:DATA:LOW?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:REFLevel:DATA:LOW?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:REFLevel:DATA:LOW valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:DDRREAD:REFLevel:DATA:LOW <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:DDRREAD:REFLevel:DATA:LOW?
Info
NR3sets the DDR read search data low reference value.
mid
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:DDRREAD:REFLevel:DATA:MID command.
Description
- This command sets or queries the DDR read data mid reference level value, when the search type is DDR READ.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:REFLevel:DATA:MID?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:REFLevel:DATA:MID?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:REFLevel:DATA:MID valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:DDRREAD:REFLevel:DATA:MID <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:DDRREAD:REFLevel:DATA:MID?
Info
NR3sets the DDR read search data mid reference value.
SearchSearchItemTriggerADdrreadReflevelDataHigh
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:DDRREAD:REFLevel:DATA:HIGH command.
Description
- This command sets or queries the DDR read data high reference level value, when the search type is DDR READ.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:REFLevel:DATA:HIGH?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:REFLevel:DATA:HIGH?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:REFLevel:DATA:HIGH valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:DDRREAD:REFLevel:DATA:HIGH <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:DDRREAD:REFLevel:DATA:HIGH?
Info
NR3sets the DDR read search data high reference value.
SearchSearchItemTriggerADdrreadReflevelDataLow
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:DDRREAD:REFLevel:DATA:LOW command.
Description
- This command sets or queries the DDR read data low reference level value, when the search type is DDR READ.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:REFLevel:DATA:LOW?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:REFLevel:DATA:LOW?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:REFLevel:DATA:LOW valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:DDRREAD:REFLevel:DATA:LOW <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:DDRREAD:REFLevel:DATA:LOW?
Info
NR3sets the DDR read search data low reference value.
SearchSearchItemTriggerADdrreadReflevelDataMid
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:DDRREAD:REFLevel:DATA:MID command.
Description
- This command sets or queries the DDR read data mid reference level value, when the search type is DDR READ.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:REFLevel:DATA:MID?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:REFLevel:DATA:MID?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:REFLevel:DATA:MID valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:DDRREAD:REFLevel:DATA:MID <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:DDRREAD:REFLevel:DATA:MID?
Info
NR3sets the DDR read search data mid reference value.
SearchSearchItemTriggerADdrreadReflevelStrobe
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:DDRREAD:REFLevel:STROBE command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:REFLevel:STROBE?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:REFLevel:STROBE?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.high: TheSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:REFLevel:STROBE:HIGHcommand..low: TheSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:REFLevel:STROBE:LOWcommand..mid: TheSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:REFLevel:STROBE:MIDcommand.
high
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:DDRREAD:REFLevel:STROBE:HIGH command.
Description
- This command sets or queries the DDR read reference level strobe high value, when the search type is DDR READ.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:REFLevel:STROBE:HIGH?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:REFLevel:STROBE:HIGH?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:REFLevel:STROBE:HIGH valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:DDRREAD:REFLevel:STROBE:HIGH <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:DDRREAD:REFLevel:STROBE:HIGH?
Info
NR3sets the DDR read search strobe high value.
low
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:DDRREAD:REFLevel:STROBE:LOW command.
Description
- This command sets or queries the DDR read reference level strobe low value, when the search type is DDR READ.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:REFLevel:STROBE:LOW?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:REFLevel:STROBE:LOW?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:REFLevel:STROBE:LOW valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:DDRREAD:REFLevel:STROBE:LOW <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:DDRREAD:REFLevel:STROBE:LOW?
Info
NR3sets the DDR read search strobe low reference value.
mid
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:DDRREAD:REFLevel:STROBE:MID command.
Description
- This command sets or queries the DDR read reference level strobe mid value, when the search type is DDR READ.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:REFLevel:STROBE:MID?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:REFLevel:STROBE:MID?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:REFLevel:STROBE:MID valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:DDRREAD:REFLevel:STROBE:MID <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:DDRREAD:REFLevel:STROBE:MID?
Info
NR3sets the DDR read search strobe mid reference value.
SearchSearchItemTriggerADdrreadReflevelStrobeHigh
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:DDRREAD:REFLevel:STROBE:HIGH command.
Description
- This command sets or queries the DDR read reference level strobe high value, when the search type is DDR READ.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:REFLevel:STROBE:HIGH?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:REFLevel:STROBE:HIGH?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:REFLevel:STROBE:HIGH valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:DDRREAD:REFLevel:STROBE:HIGH <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:DDRREAD:REFLevel:STROBE:HIGH?
Info
NR3sets the DDR read search strobe high value.
SearchSearchItemTriggerADdrreadReflevelStrobeLow
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:DDRREAD:REFLevel:STROBE:LOW command.
Description
- This command sets or queries the DDR read reference level strobe low value, when the search type is DDR READ.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:REFLevel:STROBE:LOW?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:REFLevel:STROBE:LOW?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:REFLevel:STROBE:LOW valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:DDRREAD:REFLevel:STROBE:LOW <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:DDRREAD:REFLevel:STROBE:LOW?
Info
NR3sets the DDR read search strobe low reference value.
SearchSearchItemTriggerADdrreadReflevelStrobeMid
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:DDRREAD:REFLevel:STROBE:MID command.
Description
- This command sets or queries the DDR read reference level strobe mid value, when the search type is DDR READ.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:REFLevel:STROBE:MID?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:REFLevel:STROBE:MID?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:REFLevel:STROBE:MID valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:DDRREAD:REFLevel:STROBE:MID <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:DDRREAD:REFLevel:STROBE:MID?
Info
NR3sets the DDR read search strobe mid reference value.
SearchSearchItemTriggerADdrreadReflevelmode
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:DDRREAD:REFLEVELMode command.
Description
- This command sets or queries the DDR read reference level mode to auto or manual, when the search type is DDR READ.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:REFLEVELMode?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:REFLEVELMode?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:REFLEVELMode valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:DDRREAD:REFLEVELMode {AUTO|MANUAL}
- SEARCH:SEARCH<x>:TRIGger:A:DDRREAD:REFLEVELMode?
Info
AUTOsets the DDR read reference level mode to auto.MANUALsets the DDR read reference level mode to manual. Use the Related Commands to set the Reference levels when in Manual mode.
SearchSearchItemTriggerADdrreadStandard
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:DDRREAD:STANdard command.
Description
- This command sets or queries the DDR read search standard as DDR3 or LPDDR3.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:STANdard?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:STANdard?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:STANdard valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:DDRREAD:STANdard {DDR3|LPDDR3}
- SEARCH:SEARCH<x>:TRIGger:A:DDRREAD:STANdard?
Info
DDR3sets the DDR read search standard as DDR3.LPDDR3sets the DDR read search standard as LPDDR3.
SearchSearchItemTriggerADdrreadStrobesource
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:DDRREAD:STROBESource command.
Description
- This command sets or queries the DDR read strobe source when the search type is DDR READ.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:STROBESource?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:STROBESource?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:STROBESource valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:DDRREAD:STROBESource {CH<x>|CH<x>_D<x<|Math<x>|REF<x>|REF<x>_D<x>}
- SEARCH:SEARCH<x>:TRIGger:A:DDRREAD:STROBESource?
Info
CH<x>specifies channelas the DDR read strobe trigger source for the specified search . CH<x>_D<x>specifies digital waveformof channel as the DDR read strobe trigger source for the specified search . Math<x>specifies math waveformas the DDR read strobe trigger source for the specified search . REF<x>specifies reference waveformas the DDR read strobe trigger source for the specified search . REF<x>_D<x>specifies digital waveformof reference waveform as the DDR read strobe trigger source for the specified search .
SearchSearchItemTriggerADdrreadTolerance
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:DDRREAD:TOLERance command.
Description
- This command sets or queries the DDR read logic state tolerance value.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:TOLERance?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:TOLERance?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREAD:TOLERance valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:DDRREAD:TOLERance <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:DDRREAD:TOLERance?
Info
SEARCH<x>specifies the search number.NR3sets the logic state tolerance value.
SearchSearchItemTriggerADdrreadwrite
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.burstdetectmethod: TheSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:BURSTDETectmethodcommand..burstlength: TheSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:BURSTLENGTHcommand..burstlatency: TheSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:BURSTLatencycommand..csactive: TheSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:CSActivecommand..cslevel: TheSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:CSLevelcommand..csmode: TheSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:CSModecommand..cssource: TheSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:CSSourcecommand..datarate: TheSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:DATARatecommand..datasource: TheSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:DATASourcecommand..hysteresis: TheSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:HYSteresiscommand..logic1source: TheSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:LOGIC1SOUrcecommand tree..logic2source: TheSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:LOGIC2SOUrcecommand tree..logic3source: TheSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:LOGIC3SOUrcecommand tree..logic4source: TheSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:LOGIC4SOUrcecommand tree..margin: TheSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:MARgincommand..maxcas: TheSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:MAXCAScommand..mincas: TheSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:MINCascommand..postamble: TheSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:POSTAMBLEcommand tree..preamble: TheSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:PREAMBLEcommand tree..reflevelmode: TheSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:REFLEVELModecommand..reflevel: TheSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:REFLevelcommand tree..standard: TheSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:STANdardcommand..strobesource: TheSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:STROBESourcecommand..tolerance: TheSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:TOLERancecommand.
burstdetectmethod
property
¶
burstdetectmethod: SearchSearchItemTriggerADdrreadwriteBurstdetectmethod
Return the SEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:BURSTDETectmethod command.
Description
- This command sets or queries the DDR Read/Write search burst detection method.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:BURSTDETectmethod?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:BURSTDETectmethod?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:BURSTDETectmethod valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:BURSTDETectmethod {DQDQS|ChipSelect|LogicState}
- SEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:BURSTDETectmethod?
Info
DQDQSsets the read/write burst detection method to DQDQS.ChipSelectsets the read/write burst detection method to ChipSelect.LogicStatesets the read/write burst detection method to LogicState.
burstlatency
property
¶
burstlatency: SearchSearchItemTriggerADdrreadwriteBurstlatency
Return the SEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:BURSTLatency command.
Description
- This command sets or queries the DDR read/write logic state burst latency value.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:BURSTLatency?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:BURSTLatency?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:BURSTLatency valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:BURSTLatency <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:BURSTLatency?
Info
SEARCH<x>specifies the search number.NR3sets the logic state burst latency value.
burstlength
property
¶
burstlength: SearchSearchItemTriggerADdrreadwriteBurstlength
Return the SEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:BURSTLENGTH command.
Description
- This command sets or queries the DDR read/write logic state burst length value.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:BURSTLENGTH?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:BURSTLENGTH?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:BURSTLENGTH valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:BURSTLENGTH <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:BURSTLENGTH?
Info
SEARCH<x>specifies the search number.NR1sets the logic state burst length value.
csactive
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:CSActive command.
Description
- This command sets or queries the DDR Read/Write chip select active state.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:CSActive?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:CSActive?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:CSActive valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:CSActive {LOW|HIGH}
- SEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:CSActive?
Info
SEARCH<x>specifies the search number.LOWsets the DDR read/write chip select active state to low.HIGHsets the DDR read/write chip select active state to high.
cslevel
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:CSLevel command.
Description
- This command sets or queries the DDR Read/Write chip select level value.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:CSLevel?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:CSLevel?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:CSLevel valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:CSLevel <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:CSLevel?
Info
SEARCH<x>specifies the search number.NR3sets the DDR read/write chip select level value.
csmode
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:CSMode command.
Description
- This command sets or queries the DDR read/write chip select mode.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:CSMode?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:CSMode?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:CSMode valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:CSMode {Auto|Manual}
- SEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:CSMode?
Info
SEARCH<x>specifies the search number.Autosets the DDR read/write chip select mode to auto.Manualsets the DDR read/write chip select mode to manual. Use the Related Commands to set the Reference levels when in Manual mode.
cssource
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:CSSource command.
Description
- This command sets or queries the DDR Read/Write search chip select source.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:CSSource?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:CSSource?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:CSSource valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:CSSource {S<x>_Ch<x>_D<x>|CH<x>|CH<x>_D<x>|Math<x>|REF<x>|REF<x>_D<x>}
- SEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:CSSource?
Info
SEARCH<x>specifies the search number.S<x>_Ch<x>_D<x>specifies is the remote scope number, the analog channel and the digital channel.CH<x>specifies channelas the DDR read/write chip select source for the specified search . CH<x>_D<x>specifies digital waveformof channel as the DDR read/write strobe source for the specified search . Math<x>specifies math waveformas the DDR read/write chip select source for the specified search . REF<x>specifies reference waveformas the DDR read/write chip select source for the specified search . REF<x>_D<x>specifies digital waveformof reference waveform as the DDR read/write strobe source for the specified search .
datarate
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:DATARate command.
Description
- This command sets or queries the DDR read/write data rate for DDR3 and LPDRR3 standards of the specified search.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:DATARate?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:DATARate?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:DATARate valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:DATARate {333|800|1066|1200|1333|1466|1600|1866|2133}
- SEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:DATARate?
Info
333sets the data rate to 333.800sets the data rate to 800.1066sets the data rate to 1066.1200sets the data rate to 1200.1333sets the data rate to 1333.1466sets the data rate to 1466.1600sets the data rate to 1600.1866sets the data rate to 1866.2133sets the data rate to 2133.
datasource
property
¶
datasource: SearchSearchItemTriggerADdrreadwriteDatasource
Return the SEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:DATASource command.
Description
- This command sets or queries the DDR read/write data source when the search type is DDR READWRITE.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:DATASource?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:DATASource?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:DATASource valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:DATASource {CH<x>|CH<x>_D<x<|Math<x>|REF<x>|REF<x>_D<x>}
- SEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:DATASource?
Info
CH<x>specifies channelas the DDR read/write data source for the specified search . CH<x>_D<x>specifies digital waveformof channel as the DDR read/write data source for the specified search . Math<x>specifies math waveformas the DDR read/write data source for the specified search . REF<x>specifies reference waveformas the DDR read/write data source for the specified search . REF<x>_D<x>specifies digital waveformof reference waveform as the DDR read/write data source for the specified search .
hysteresis
property
¶
hysteresis: SearchSearchItemTriggerADdrreadwriteHysteresis
Return the SEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:HYSteresis command.
Description
- This command sets or queries the DDR read/write hysteresis reference level value, when the search type is DDR READWRITE.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:HYSteresis?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:HYSteresis?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:HYSteresis valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:HYSteresis <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:HYSteresis?
Info
NR3sets the DDR read/write search hysteresis percent value in the range of 0% to 50%.
logic1source
property
¶
logic1source: SearchSearchItemTriggerADdrreadwriteLogic1source
Return the SEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:LOGIC1SOUrce command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:LOGIC1SOUrce?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:LOGIC1SOUrce?query and raise an AssertionError if the returned value does not matchvalue.
Info
SEARCH<x>specifies the search number.
Sub-properties
.symbol: TheSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:LOGIC1SOUrce:SYMBolcommand.
logic2source
property
¶
logic2source: SearchSearchItemTriggerADdrreadwriteLogic2source
Return the SEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:LOGIC2SOUrce command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:LOGIC2SOUrce?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:LOGIC2SOUrce?query and raise an AssertionError if the returned value does not matchvalue.
Info
SEARCH<x>specifies the search number.
Sub-properties
.symbol: TheSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:LOGIC2SOUrce:SYMBolcommand.
logic3source
property
¶
logic3source: SearchSearchItemTriggerADdrreadwriteLogic3source
Return the SEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:LOGIC3SOUrce command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:LOGIC3SOUrce?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:LOGIC3SOUrce?query and raise an AssertionError if the returned value does not matchvalue.
Info
SEARCH<x>specifies the search number.
Sub-properties
.symbol: TheSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:LOGIC3SOUrce:SYMBolcommand.
logic4source
property
¶
logic4source: SearchSearchItemTriggerADdrreadwriteLogic4source
Return the SEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:LOGIC4SOUrce command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:LOGIC4SOUrce?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:LOGIC4SOUrce?query and raise an AssertionError if the returned value does not matchvalue.
Info
SEARCH<x>specifies the search number.
Sub-properties
.symbol: TheSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:LOGIC4SOUrce:SYMBolcommand.
margin
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:MARgin command.
Description
- This command sets or queries the DDR read/write margin reference level value, when the search type is DDR READWRITE.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:MARgin?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:MARgin?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:MARgin valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:MARgin <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:MARgin?
Info
NR3sets the DDR read/write search margin percent value in the range of 0% to 100%.
maxcas
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:MAXCAS command.
Description
- This command sets or queries the DDR read/write chip maximum Column Access Strobe (CAS) value.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:MAXCAS?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:MAXCAS?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:MAXCAS valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:MAXCAS <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:MAXCAS?
Info
SEARCH<x>specifies the search number.NR3sets the DDR read chip select CAS maximum value.
mincas
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:MINCas command.
Description
- This command sets or queries the DDR read/write chip minimum Column Access Strobe (CAS) value.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:MINCas?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:MINCas?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:MINCas valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:MINCas <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:MINCas?
Info
SEARCH<x>specifies the search number.NR3sets the DDR read chip select CAS minimum value.
postamble
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:POSTAMBLE command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:POSTAMBLE?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:POSTAMBLE?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.length: TheSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:POSTAMBLE:LENGthcommand.
preamble
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:PREAMBLE command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:PREAMBLE?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:PREAMBLE?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.type: TheSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:PREAMBLE:TYPEcommand.
reflevel
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:REFLevel command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:REFLevel?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:REFLevel?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.data: TheSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:REFLevel:DATAcommand tree..strobe: TheSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:REFLevel:STROBEcommand tree.
reflevelmode
property
¶
reflevelmode: SearchSearchItemTriggerADdrreadwriteReflevelmode
Return the SEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:REFLEVELMode command.
Description
- This command sets or queries the DDR read/write reference level mode to auto or manual, when the search type is DDR READWRITE.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:REFLEVELMode?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:REFLEVELMode?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:REFLEVELMode valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:REFLEVELMode {AUTO|MANUAL}
- SEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:REFLEVELMode?
Info
AUTOsets the DDR read/write reference level mode to auto.MANUALsets the DDR read/write reference level mode to manual. Use the Related Commands to set the Reference levels when in Manual mode.
standard
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:STANdard command.
Description
- This command sets or queries the DDR read/write search standard as DDR3 or LPDDR3.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:STANdard?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:STANdard?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:STANdard valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:STANdard {DDR3|LPDDR3}
- SEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:STANdard?
Info
DDR3sets the DDR read/write search standard as DDR3.LPDDR3sets the DDR read/write search standard as LPDDR3.
strobesource
property
¶
strobesource: SearchSearchItemTriggerADdrreadwriteStrobesource
Return the SEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:STROBESource command.
Description
- This command sets or queries the DDR readwrite strobe source when the search type is DDR READWRITE.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:STROBESource?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:STROBESource?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:STROBESource valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:STROBESource {CH<x>|CH<x>_D<x<|Math<x>|REF<x>|REF<x>_D<x>}
- SEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:STROBESource?
Info
CH<x>specifies channelas the DDR read/write strobe source for the specified search . CH<x>_D<x>specifies digital waveformof channel as the DDR read/write strobe source for the specified search . Math<x>specifies math waveformas the DDR read/write strobe source for the specified search . REF<x>specifies reference waveformas the DDR read/write strobe source for the specified search . REF<x>_D<x>specifies digital waveformof reference waveform as the DDR read/write strobe source for the specified search .
tolerance
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:TOLERance command.
Description
- This command sets or queries the DDR read/write logic state tolerance value.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:TOLERance?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:TOLERance?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:TOLERance valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:TOLERance <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:TOLERance?
Info
SEARCH<x>specifies the search number.NR3sets the logic state tolerance value.
SearchSearchItemTriggerADdrreadwriteBurstdetectmethod
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:BURSTDETectmethod command.
Description
- This command sets or queries the DDR Read/Write search burst detection method.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:BURSTDETectmethod?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:BURSTDETectmethod?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:BURSTDETectmethod valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:BURSTDETectmethod {DQDQS|ChipSelect|LogicState}
- SEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:BURSTDETectmethod?
Info
DQDQSsets the read/write burst detection method to DQDQS.ChipSelectsets the read/write burst detection method to ChipSelect.LogicStatesets the read/write burst detection method to LogicState.
SearchSearchItemTriggerADdrreadwriteBurstlatency
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:BURSTLatency command.
Description
- This command sets or queries the DDR read/write logic state burst latency value.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:BURSTLatency?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:BURSTLatency?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:BURSTLatency valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:BURSTLatency <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:BURSTLatency?
Info
SEARCH<x>specifies the search number.NR3sets the logic state burst latency value.
SearchSearchItemTriggerADdrreadwriteBurstlength
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:BURSTLENGTH command.
Description
- This command sets or queries the DDR read/write logic state burst length value.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:BURSTLENGTH?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:BURSTLENGTH?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:BURSTLENGTH valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:BURSTLENGTH <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:BURSTLENGTH?
Info
SEARCH<x>specifies the search number.NR1sets the logic state burst length value.
SearchSearchItemTriggerADdrreadwriteCsactive
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:CSActive command.
Description
- This command sets or queries the DDR Read/Write chip select active state.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:CSActive?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:CSActive?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:CSActive valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:CSActive {LOW|HIGH}
- SEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:CSActive?
Info
SEARCH<x>specifies the search number.LOWsets the DDR read/write chip select active state to low.HIGHsets the DDR read/write chip select active state to high.
SearchSearchItemTriggerADdrreadwriteCslevel
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:CSLevel command.
Description
- This command sets or queries the DDR Read/Write chip select level value.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:CSLevel?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:CSLevel?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:CSLevel valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:CSLevel <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:CSLevel?
Info
SEARCH<x>specifies the search number.NR3sets the DDR read/write chip select level value.
SearchSearchItemTriggerADdrreadwriteCsmode
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:CSMode command.
Description
- This command sets or queries the DDR read/write chip select mode.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:CSMode?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:CSMode?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:CSMode valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:CSMode {Auto|Manual}
- SEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:CSMode?
Info
SEARCH<x>specifies the search number.Autosets the DDR read/write chip select mode to auto.Manualsets the DDR read/write chip select mode to manual. Use the Related Commands to set the Reference levels when in Manual mode.
SearchSearchItemTriggerADdrreadwriteCssource
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:CSSource command.
Description
- This command sets or queries the DDR Read/Write search chip select source.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:CSSource?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:CSSource?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:CSSource valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:CSSource {S<x>_Ch<x>_D<x>|CH<x>|CH<x>_D<x>|Math<x>|REF<x>|REF<x>_D<x>}
- SEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:CSSource?
Info
SEARCH<x>specifies the search number.S<x>_Ch<x>_D<x>specifies is the remote scope number, the analog channel and the digital channel.CH<x>specifies channelas the DDR read/write chip select source for the specified search . CH<x>_D<x>specifies digital waveformof channel as the DDR read/write strobe source for the specified search . Math<x>specifies math waveformas the DDR read/write chip select source for the specified search . REF<x>specifies reference waveformas the DDR read/write chip select source for the specified search . REF<x>_D<x>specifies digital waveformof reference waveform as the DDR read/write strobe source for the specified search .
SearchSearchItemTriggerADdrreadwriteDatarate
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:DATARate command.
Description
- This command sets or queries the DDR read/write data rate for DDR3 and LPDRR3 standards of the specified search.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:DATARate?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:DATARate?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:DATARate valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:DATARate {333|800|1066|1200|1333|1466|1600|1866|2133}
- SEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:DATARate?
Info
333sets the data rate to 333.800sets the data rate to 800.1066sets the data rate to 1066.1200sets the data rate to 1200.1333sets the data rate to 1333.1466sets the data rate to 1466.1600sets the data rate to 1600.1866sets the data rate to 1866.2133sets the data rate to 2133.
SearchSearchItemTriggerADdrreadwriteDatasource
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:DATASource command.
Description
- This command sets or queries the DDR read/write data source when the search type is DDR READWRITE.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:DATASource?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:DATASource?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:DATASource valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:DATASource {CH<x>|CH<x>_D<x<|Math<x>|REF<x>|REF<x>_D<x>}
- SEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:DATASource?
Info
CH<x>specifies channelas the DDR read/write data source for the specified search . CH<x>_D<x>specifies digital waveformof channel as the DDR read/write data source for the specified search . Math<x>specifies math waveformas the DDR read/write data source for the specified search . REF<x>specifies reference waveformas the DDR read/write data source for the specified search . REF<x>_D<x>specifies digital waveformof reference waveform as the DDR read/write data source for the specified search .
SearchSearchItemTriggerADdrreadwriteHysteresis
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:HYSteresis command.
Description
- This command sets or queries the DDR read/write hysteresis reference level value, when the search type is DDR READWRITE.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:HYSteresis?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:HYSteresis?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:HYSteresis valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:HYSteresis <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:HYSteresis?
Info
NR3sets the DDR read/write search hysteresis percent value in the range of 0% to 50%.
SearchSearchItemTriggerADdrreadwriteLogic1source
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:LOGIC1SOUrce command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:LOGIC1SOUrce?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:LOGIC1SOUrce?query and raise an AssertionError if the returned value does not matchvalue.
Info
SEARCH<x>specifies the search number.
Properties
.symbol: TheSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:LOGIC1SOUrce:SYMBolcommand.
symbol
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:LOGIC1SOUrce:SYMBol command.
Description
- This command sets or queries the DDR read/write logic source 1 symbol.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:LOGIC1SOUrce:SYMBol?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:LOGIC1SOUrce:SYMBol?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:LOGIC1SOUrce:SYMBol valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:LOGIC1SOUrce:SYMBol {H|L|X}
- SEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:LOGIC1SOUrce:SYMBol?
Info
SEARCH<x>specifies the search number.Hsets the logic source 1 symbol to H (High).Lsets the logic source 1 symbol to L (Low).Xsets the logic source 1 symbol to X (Don’t care).
SearchSearchItemTriggerADdrreadwriteLogic1sourceSymbol
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:LOGIC1SOUrce:SYMBol command.
Description
- This command sets or queries the DDR read/write logic source 1 symbol.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:LOGIC1SOUrce:SYMBol?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:LOGIC1SOUrce:SYMBol?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:LOGIC1SOUrce:SYMBol valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:LOGIC1SOUrce:SYMBol {H|L|X}
- SEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:LOGIC1SOUrce:SYMBol?
Info
SEARCH<x>specifies the search number.Hsets the logic source 1 symbol to H (High).Lsets the logic source 1 symbol to L (Low).Xsets the logic source 1 symbol to X (Don’t care).
SearchSearchItemTriggerADdrreadwriteLogic2source
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:LOGIC2SOUrce command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:LOGIC2SOUrce?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:LOGIC2SOUrce?query and raise an AssertionError if the returned value does not matchvalue.
Info
SEARCH<x>specifies the search number.
Properties
.symbol: TheSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:LOGIC2SOUrce:SYMBolcommand.
symbol
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:LOGIC2SOUrce:SYMBol command.
Description
- This command sets or queries the DDR read/write logic source 2 symbol.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:LOGIC2SOUrce:SYMBol?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:LOGIC2SOUrce:SYMBol?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:LOGIC2SOUrce:SYMBol valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:LOGIC2SOUrce:SYMBol {H|L|X}
- SEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:LOGIC2SOUrce:SYMBol?
Info
SEARCH<x>specifies the search number.Hsets the logic source 2 symbol to H (High).Lsets the logic source 2 symbol to L (Low).Xsets the logic source 2 symbol to X (Don’t care).
SearchSearchItemTriggerADdrreadwriteLogic2sourceSymbol
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:LOGIC2SOUrce:SYMBol command.
Description
- This command sets or queries the DDR read/write logic source 2 symbol.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:LOGIC2SOUrce:SYMBol?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:LOGIC2SOUrce:SYMBol?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:LOGIC2SOUrce:SYMBol valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:LOGIC2SOUrce:SYMBol {H|L|X}
- SEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:LOGIC2SOUrce:SYMBol?
Info
SEARCH<x>specifies the search number.Hsets the logic source 2 symbol to H (High).Lsets the logic source 2 symbol to L (Low).Xsets the logic source 2 symbol to X (Don’t care).
SearchSearchItemTriggerADdrreadwriteLogic3source
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:LOGIC3SOUrce command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:LOGIC3SOUrce?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:LOGIC3SOUrce?query and raise an AssertionError if the returned value does not matchvalue.
Info
SEARCH<x>specifies the search number.
Properties
.symbol: TheSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:LOGIC3SOUrce:SYMBolcommand.
symbol
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:LOGIC3SOUrce:SYMBol command.
Description
- This command sets or queries the DDR read/write logic source 3 symbol.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:LOGIC3SOUrce:SYMBol?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:LOGIC3SOUrce:SYMBol?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:LOGIC3SOUrce:SYMBol valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:LOGIC3SOUrce:SYMBol {H|L|X}
- SEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:LOGIC3SOUrce:SYMBol?
Info
SEARCH<x>specifies the search number.Hsets the logic source 3 symbol to H (High).Lsets the logic source 3 symbol to L (Low).Xsets the logic source 3 symbol to X (Don’t care).
SearchSearchItemTriggerADdrreadwriteLogic3sourceSymbol
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:LOGIC3SOUrce:SYMBol command.
Description
- This command sets or queries the DDR read/write logic source 3 symbol.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:LOGIC3SOUrce:SYMBol?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:LOGIC3SOUrce:SYMBol?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:LOGIC3SOUrce:SYMBol valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:LOGIC3SOUrce:SYMBol {H|L|X}
- SEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:LOGIC3SOUrce:SYMBol?
Info
SEARCH<x>specifies the search number.Hsets the logic source 3 symbol to H (High).Lsets the logic source 3 symbol to L (Low).Xsets the logic source 3 symbol to X (Don’t care).
SearchSearchItemTriggerADdrreadwriteLogic4source
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:LOGIC4SOUrce command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:LOGIC4SOUrce?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:LOGIC4SOUrce?query and raise an AssertionError if the returned value does not matchvalue.
Info
SEARCH<x>specifies the search number.
Properties
.symbol: TheSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:LOGIC4SOUrce:SYMBolcommand.
symbol
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:LOGIC4SOUrce:SYMBol command.
Description
- This command sets or queries the DDR read/write logic source 4 symbol.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:LOGIC4SOUrce:SYMBol?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:LOGIC4SOUrce:SYMBol?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:LOGIC4SOUrce:SYMBol valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:LOGIC4SOUrce:SYMBol {H|L|X}
- SEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:LOGIC4SOUrce:SYMBol?
Info
SEARCH<x>specifies the search number.Hsets the logic source 4 symbol to H (High).Lsets the logic source 4 symbol to L (Low).Xsets the logic source 4 symbol to X (Don’t care).
SearchSearchItemTriggerADdrreadwriteLogic4sourceSymbol
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:LOGIC4SOUrce:SYMBol command.
Description
- This command sets or queries the DDR read/write logic source 4 symbol.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:LOGIC4SOUrce:SYMBol?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:LOGIC4SOUrce:SYMBol?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:LOGIC4SOUrce:SYMBol valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:LOGIC4SOUrce:SYMBol {H|L|X}
- SEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:LOGIC4SOUrce:SYMBol?
Info
SEARCH<x>specifies the search number.Hsets the logic source 4 symbol to H (High).Lsets the logic source 4 symbol to L (Low).Xsets the logic source 4 symbol to X (Don’t care).
SearchSearchItemTriggerADdrreadwriteMargin
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:MARgin command.
Description
- This command sets or queries the DDR read/write margin reference level value, when the search type is DDR READWRITE.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:MARgin?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:MARgin?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:MARgin valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:MARgin <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:MARgin?
Info
NR3sets the DDR read/write search margin percent value in the range of 0% to 100%.
SearchSearchItemTriggerADdrreadwriteMaxcas
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:MAXCAS command.
Description
- This command sets or queries the DDR read/write chip maximum Column Access Strobe (CAS) value.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:MAXCAS?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:MAXCAS?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:MAXCAS valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:MAXCAS <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:MAXCAS?
Info
SEARCH<x>specifies the search number.NR3sets the DDR read chip select CAS maximum value.
SearchSearchItemTriggerADdrreadwriteMincas
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:MINCas command.
Description
- This command sets or queries the DDR read/write chip minimum Column Access Strobe (CAS) value.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:MINCas?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:MINCas?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:MINCas valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:MINCas <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:MINCas?
Info
SEARCH<x>specifies the search number.NR3sets the DDR read chip select CAS minimum value.
SearchSearchItemTriggerADdrreadwritePostamble
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:POSTAMBLE command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:POSTAMBLE?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:POSTAMBLE?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.length: TheSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:POSTAMBLE:LENGthcommand.
length
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:POSTAMBLE:LENGth command.
Description
- This command sets or queries the DDR read/write postamble length when the search type is DDR READWRITE.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:POSTAMBLE:LENGth?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:POSTAMBLE:LENGth?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:POSTAMBLE:LENGth valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:POSTAMBLE:LENGth {500E-3|1.5|1}
- SEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:POSTAMBLE:LENGth?
Info
500E-1.5sets the postamble length to 1.5 tCK (number of clock cycles).500E-1sets the postamble length to 1 tCK (number of clock cycles).500E-3sets the postamble length to 0.5 tCK (number of clock cycles).
SearchSearchItemTriggerADdrreadwritePostambleLength
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:POSTAMBLE:LENGth command.
Description
- This command sets or queries the DDR read/write postamble length when the search type is DDR READWRITE.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:POSTAMBLE:LENGth?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:POSTAMBLE:LENGth?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:POSTAMBLE:LENGth valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:POSTAMBLE:LENGth {500E-3|1.5|1}
- SEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:POSTAMBLE:LENGth?
Info
500E-1.5sets the postamble length to 1.5 tCK (number of clock cycles).500E-1sets the postamble length to 1 tCK (number of clock cycles).500E-3sets the postamble length to 0.5 tCK (number of clock cycles).
SearchSearchItemTriggerADdrreadwritePreamble
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:PREAMBLE command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:PREAMBLE?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:PREAMBLE?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.type: TheSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:PREAMBLE:TYPEcommand.
type
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:PREAMBLE:TYPE command.
Description
- This command sets or queries the DDR read/write preamble type when the search type is DDR READWRITE.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:PREAMBLE:TYPE?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:PREAMBLE:TYPE?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:PREAMBLE:TYPE valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:PREAMBLE:TYPE {STATIC|DYNAMIC}
- SEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:PREAMBLE:TYPE?
Info
STATICsets the DDR Read/Write preamble type to Static.DYNAMICsets the DDR Read/Write preamble type to Dynamic.
SearchSearchItemTriggerADdrreadwritePreambleType
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:PREAMBLE:TYPE command.
Description
- This command sets or queries the DDR read/write preamble type when the search type is DDR READWRITE.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:PREAMBLE:TYPE?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:PREAMBLE:TYPE?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:PREAMBLE:TYPE valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:PREAMBLE:TYPE {STATIC|DYNAMIC}
- SEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:PREAMBLE:TYPE?
Info
STATICsets the DDR Read/Write preamble type to Static.DYNAMICsets the DDR Read/Write preamble type to Dynamic.
SearchSearchItemTriggerADdrreadwriteReflevel
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:REFLevel command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:REFLevel?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:REFLevel?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.data: TheSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:REFLevel:DATAcommand tree..strobe: TheSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:REFLevel:STROBEcommand tree.
data
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:REFLevel:DATA command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:REFLevel:DATA?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:REFLevel:DATA?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.high: TheSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:REFLevel:DATA:HIGHcommand..low: TheSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:REFLevel:DATA:LOWcommand..mid: TheSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:REFLevel:DATA:MIDcommand.
strobe
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:REFLevel:STROBE command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:REFLevel:STROBE?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:REFLevel:STROBE?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.high: TheSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:REFLevel:STROBE:HIGHcommand..low: TheSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:REFLevel:STROBE:LOWcommand..mid: TheSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:REFLevel:STROBE:MIDcommand.
SearchSearchItemTriggerADdrreadwriteReflevelData
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:REFLevel:DATA command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:REFLevel:DATA?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:REFLevel:DATA?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.high: TheSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:REFLevel:DATA:HIGHcommand..low: TheSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:REFLevel:DATA:LOWcommand..mid: TheSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:REFLevel:DATA:MIDcommand.
high
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:REFLevel:DATA:HIGH command.
Description
- This command sets or queries the DDR read/write data high reference level value, when the search type is DDR READWRITE.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:REFLevel:DATA:HIGH?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:REFLevel:DATA:HIGH?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:REFLevel:DATA:HIGH valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:REFLevel:DATA:HIGH <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:REFLevel:DATA:HIGH?
Info
NR3sets the DDR read/write search data high reference value.
low
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:REFLevel:DATA:LOW command.
Description
- This command sets or queries the DDR read/write data low reference level value, when the search type is DDR READWRITE.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:REFLevel:DATA:LOW?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:REFLevel:DATA:LOW?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:REFLevel:DATA:LOW valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:REFLevel:DATA:LOW <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:REFLevel:DATA:LOW?
Info
NR3sets the DDR read/write search data low reference value.
mid
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:REFLevel:DATA:MID command.
Description
- This command sets or queries the DDR read/write data mid reference level value, when the search type is DDR READWRITE.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:REFLevel:DATA:MID?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:REFLevel:DATA:MID?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:REFLevel:DATA:MID valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:REFLevel:DATA:MID <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:REFLevel:DATA:MID?
Info
NR3sets the DDR read/write search data mid reference value.
SearchSearchItemTriggerADdrreadwriteReflevelDataHigh
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:REFLevel:DATA:HIGH command.
Description
- This command sets or queries the DDR read/write data high reference level value, when the search type is DDR READWRITE.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:REFLevel:DATA:HIGH?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:REFLevel:DATA:HIGH?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:REFLevel:DATA:HIGH valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:REFLevel:DATA:HIGH <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:REFLevel:DATA:HIGH?
Info
NR3sets the DDR read/write search data high reference value.
SearchSearchItemTriggerADdrreadwriteReflevelDataLow
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:REFLevel:DATA:LOW command.
Description
- This command sets or queries the DDR read/write data low reference level value, when the search type is DDR READWRITE.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:REFLevel:DATA:LOW?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:REFLevel:DATA:LOW?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:REFLevel:DATA:LOW valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:REFLevel:DATA:LOW <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:REFLevel:DATA:LOW?
Info
NR3sets the DDR read/write search data low reference value.
SearchSearchItemTriggerADdrreadwriteReflevelDataMid
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:REFLevel:DATA:MID command.
Description
- This command sets or queries the DDR read/write data mid reference level value, when the search type is DDR READWRITE.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:REFLevel:DATA:MID?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:REFLevel:DATA:MID?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:REFLevel:DATA:MID valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:REFLevel:DATA:MID <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:REFLevel:DATA:MID?
Info
NR3sets the DDR read/write search data mid reference value.
SearchSearchItemTriggerADdrreadwriteReflevelStrobe
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:REFLevel:STROBE command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:REFLevel:STROBE?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:REFLevel:STROBE?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.high: TheSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:REFLevel:STROBE:HIGHcommand..low: TheSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:REFLevel:STROBE:LOWcommand..mid: TheSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:REFLevel:STROBE:MIDcommand.
high
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:REFLevel:STROBE:HIGH command.
Description
- This command sets or queries the DDR read/write reference level strobe high value, when the search type is DDR READWRITE.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:REFLevel:STROBE:HIGH?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:REFLevel:STROBE:HIGH?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:REFLevel:STROBE:HIGH valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:REFLevel:STROBE:HIGH <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:REFLevel:STROBE:HIGH?
Info
NR3sets the DDR read search strobe high value.
low
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:REFLevel:STROBE:LOW command.
Description
- This command sets or queries the DDR read/write reference level strobe low value, when the search type is DDR READWRITE.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:REFLevel:STROBE:LOW?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:REFLevel:STROBE:LOW?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:REFLevel:STROBE:LOW valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:REFLevel:STROBE:LOW <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:REFLevel:STROBE:LOW?
Info
NR3sets the DDR read/write search strobe low reference value.
mid
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:REFLevel:STROBE:MID command.
Description
- This command sets or queries the DDR read/write reference level strobe mid value, when the search type is DDR READWRITE.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:REFLevel:STROBE:MID?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:REFLevel:STROBE:MID?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:REFLevel:STROBE:MID valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:REFLevel:STROBE:MID <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:REFLevel:STROBE:MID?
Info
NR3sets the DDR read/write search strobe mid reference value.
SearchSearchItemTriggerADdrreadwriteReflevelStrobeHigh
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:REFLevel:STROBE:HIGH command.
Description
- This command sets or queries the DDR read/write reference level strobe high value, when the search type is DDR READWRITE.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:REFLevel:STROBE:HIGH?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:REFLevel:STROBE:HIGH?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:REFLevel:STROBE:HIGH valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:REFLevel:STROBE:HIGH <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:REFLevel:STROBE:HIGH?
Info
NR3sets the DDR read search strobe high value.
SearchSearchItemTriggerADdrreadwriteReflevelStrobeLow
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:REFLevel:STROBE:LOW command.
Description
- This command sets or queries the DDR read/write reference level strobe low value, when the search type is DDR READWRITE.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:REFLevel:STROBE:LOW?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:REFLevel:STROBE:LOW?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:REFLevel:STROBE:LOW valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:REFLevel:STROBE:LOW <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:REFLevel:STROBE:LOW?
Info
NR3sets the DDR read/write search strobe low reference value.
SearchSearchItemTriggerADdrreadwriteReflevelStrobeMid
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:REFLevel:STROBE:MID command.
Description
- This command sets or queries the DDR read/write reference level strobe mid value, when the search type is DDR READWRITE.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:REFLevel:STROBE:MID?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:REFLevel:STROBE:MID?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:REFLevel:STROBE:MID valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:REFLevel:STROBE:MID <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:REFLevel:STROBE:MID?
Info
NR3sets the DDR read/write search strobe mid reference value.
SearchSearchItemTriggerADdrreadwriteReflevelmode
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:REFLEVELMode command.
Description
- This command sets or queries the DDR read/write reference level mode to auto or manual, when the search type is DDR READWRITE.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:REFLEVELMode?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:REFLEVELMode?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:REFLEVELMode valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:REFLEVELMode {AUTO|MANUAL}
- SEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:REFLEVELMode?
Info
AUTOsets the DDR read/write reference level mode to auto.MANUALsets the DDR read/write reference level mode to manual. Use the Related Commands to set the Reference levels when in Manual mode.
SearchSearchItemTriggerADdrreadwriteStandard
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:STANdard command.
Description
- This command sets or queries the DDR read/write search standard as DDR3 or LPDDR3.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:STANdard?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:STANdard?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:STANdard valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:STANdard {DDR3|LPDDR3}
- SEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:STANdard?
Info
DDR3sets the DDR read/write search standard as DDR3.LPDDR3sets the DDR read/write search standard as LPDDR3.
SearchSearchItemTriggerADdrreadwriteStrobesource
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:STROBESource command.
Description
- This command sets or queries the DDR readwrite strobe source when the search type is DDR READWRITE.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:STROBESource?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:STROBESource?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:STROBESource valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:STROBESource {CH<x>|CH<x>_D<x<|Math<x>|REF<x>|REF<x>_D<x>}
- SEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:STROBESource?
Info
CH<x>specifies channelas the DDR read/write strobe source for the specified search . CH<x>_D<x>specifies digital waveformof channel as the DDR read/write strobe source for the specified search . Math<x>specifies math waveformas the DDR read/write strobe source for the specified search . REF<x>specifies reference waveformas the DDR read/write strobe source for the specified search . REF<x>_D<x>specifies digital waveformof reference waveform as the DDR read/write strobe source for the specified search .
SearchSearchItemTriggerADdrreadwriteTolerance
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:TOLERance command.
Description
- This command sets or queries the DDR read/write logic state tolerance value.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:TOLERance?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:TOLERance?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:TOLERance valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:TOLERance <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:DDRREADWRITE:TOLERance?
Info
SEARCH<x>specifies the search number.NR3sets the logic state tolerance value.
SearchSearchItemTriggerADdrwrite
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:DDRWRITE command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.burstdetectmethod: TheSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:BURSTDETectmethodcommand..burstlength: TheSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:BURSTLENGTHcommand..burstlatency: TheSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:BURSTLatencycommand..csactive: TheSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:CSActivecommand..cslevel: TheSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:CSLevelcommand..csmode: TheSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:CSModecommand..cssource: TheSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:CSSourcecommand..datarate: TheSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:DATARatecommand..datasource: TheSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:DATASourcecommand..hysteresis: TheSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:HYSteresiscommand..logic1source: TheSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:LOGIC1SOUrcecommand tree..logic2source: TheSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:LOGIC2SOUrcecommand tree..logic3source: TheSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:LOGIC3SOUrcecommand tree..logic4source: TheSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:LOGIC4SOUrcecommand tree..margin: TheSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:MARgincommand..maxcas: TheSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:MAXCAScommand..mincas: TheSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:MINCascommand..postamble: TheSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:POSTAMBLEcommand tree..preamble: TheSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:PREAMBLEcommand tree..reflevelmode: TheSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:REFLEVELModecommand..reflevel: TheSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:REFLevelcommand tree..standard: TheSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:STANdardcommand..strobesource: TheSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:STROBESourcecommand..tolerance: TheSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:TOLERancecommand.
burstdetectmethod
property
¶
burstdetectmethod: SearchSearchItemTriggerADdrwriteBurstdetectmethod
Return the SEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:BURSTDETectmethod command.
Description
- This command sets or queries the DDRWRITE search burst detection method.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:BURSTDETectmethod?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:BURSTDETectmethod?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:BURSTDETectmethod valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:BURSTDETectmethod {DQDQS|ChipSelect|LogicState}
- SEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:BURSTDETectmethod?
Info
DQDQSsets the write burst detection method to DQDQS.ChipSelectsets the write burst detection method to ChipSelect.LogicStatesets the write burst detection method to LogicState.
burstlatency
property
¶
burstlatency: SearchSearchItemTriggerADdrwriteBurstlatency
Return the SEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:BURSTLatency command.
Description
- This command sets or queries the DDR write logic state burst latency value.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:BURSTLatency?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:BURSTLatency?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:BURSTLatency valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:BURSTLatency <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:BURSTLatency?
Info
SEARCH<x>specifies the search number.NR3sets the logic state burst latency value.
burstlength
property
¶
burstlength: SearchSearchItemTriggerADdrwriteBurstlength
Return the SEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:BURSTLENGTH command.
Description
- This command sets or queries the DDR write logic state burst length value.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:BURSTLENGTH?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:BURSTLENGTH?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:BURSTLENGTH valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:BURSTLENGTH <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:BURSTLENGTH?
Info
SEARCH<x>specifies the search number.NR1sets the logic state burst length value.
csactive
property
¶
csactive: SearchSearchItemTriggerADdrwriteCsactive
Return the SEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:CSActive command.
Description
- This command sets or queries the DDR write chip select active state.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:CSActive?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:CSActive?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:CSActive valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:CSActive {LOW|HIGH}
- SEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:CSActive?
Info
SEARCH<x>specifies the search number.LOWsets the DDR write chip select active state to low.HIGHsets the DDR write chip select active state to high.
cslevel
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:CSLevel command.
Description
- This command sets or queries the DDR Write chip select level value.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:CSLevel?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:CSLevel?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:CSLevel valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:CSLevel <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:CSLevel?
Info
SEARCH<x>specifies the search number.NR3sets the DDR write chip select level value.
csmode
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:CSMode command.
Description
- This command sets or queries the DDR Write chip select mode.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:CSMode?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:CSMode?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:CSMode valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:CSMode {Auto|Manual}
- SEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:CSMode?
Info
SEARCH<x>specifies the search number.Autosets the DDR write chip select mode to auto.Manualsets the DDR write chip select mode to manual. Use the Related Commands to set the Reference levels when in Manual mode.
cssource
property
¶
cssource: SearchSearchItemTriggerADdrwriteCssource
Return the SEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:CSSource command.
Description
- This command sets or queries the DDR Write search chip select source.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:CSSource?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:CSSource?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:CSSource valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:CSSource {S<x>_Ch<x>_D<x>|CH<x>|CH<x>_D<x>|Math<x>|REF<x>|REF<x>_D<x>}
- SEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:CSSource?
Info
SEARCH<x>specifies the search number.S<x>_Ch<x>_D<x>specifies is the remote scope number, the analog channel and the digital channel.CH<x>specifies channelas the DDR write chip select source for the specified search . CH<x>_D<x>specifies digital waveformof channel as the DDR write strobe source for the specified search . Math<x>specifies math waveformas the DDR write chip select source for the specified search . REF<x>specifies reference waveformas the DDR write chip select source for the specified search . REF<x>_D<x>specifies digital waveformof reference waveform as the DDR write strobe source for the specified search .
datarate
property
¶
datarate: SearchSearchItemTriggerADdrwriteDatarate
Return the SEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:DATARate command.
Description
- This command sets or queries the DDR write search data rate for DDR3 and LPDRR3 standards of the specified search.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:DATARate?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:DATARate?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:DATARate valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:DATARate {333|800|1066|1200|1333|1466|1600|1866|2133}
- SEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:DATARate?
Info
333sets the data rate to 333.800sets the data rate to 800.1066sets the data rate to 1066.1200sets the data rate to 1200.1333sets the data rate to 1333.1466sets the data rate to 1466.1600sets the data rate to 1600.1866sets the data rate to 1866.2133sets the data rate to 2133.
datasource
property
¶
datasource: SearchSearchItemTriggerADdrwriteDatasource
Return the SEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:DATASource command.
Description
- This command sets or queries the DDR write data source when the search type is DDR Write.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:DATASource?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:DATASource?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:DATASource valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:DATASource {CH<x>|CH<x>_D<x<|Math<x>|REF<x>|REF<x>_D<x>}
- SEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:DATASource?
Info
CH<x>specifies channelas the DDR write data source for the specified search . CH<x>_D<x>specifies digital waveformof channel as the DDR write data source for the specified search . Math<x>specifies math waveformas the DDR write data source for the specified search . REF<x>specifies reference waveformas the DDR write data source for the specified search . REF<x>_D<x>specifies digital waveformof reference waveform as the DDR write data source for the specified search .
hysteresis
property
¶
hysteresis: SearchSearchItemTriggerADdrwriteHysteresis
Return the SEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:HYSteresis command.
Description
- This command sets or queries the DDR write hysteresis reference level value, when the search type is DDR WRITE.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:HYSteresis?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:HYSteresis?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:HYSteresis valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:HYSteresis <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:HYSteresis?
Info
NR3sets the DDR write search hysteresis percent value in the range of 0% to 50%.
logic1source
property
¶
logic1source: SearchSearchItemTriggerADdrwriteLogic1source
Return the SEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:LOGIC1SOUrce command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:LOGIC1SOUrce?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:LOGIC1SOUrce?query and raise an AssertionError if the returned value does not matchvalue.
Info
SEARCH<x>specifies the search number.
Sub-properties
.symbol: TheSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:LOGIC1SOUrce:SYMBolcommand.
logic2source
property
¶
logic2source: SearchSearchItemTriggerADdrwriteLogic2source
Return the SEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:LOGIC2SOUrce command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:LOGIC2SOUrce?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:LOGIC2SOUrce?query and raise an AssertionError if the returned value does not matchvalue.
Info
SEARCH<x>specifies the search number.
Sub-properties
.symbol: TheSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:LOGIC2SOUrce:SYMBolcommand.
logic3source
property
¶
logic3source: SearchSearchItemTriggerADdrwriteLogic3source
Return the SEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:LOGIC3SOUrce command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:LOGIC3SOUrce?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:LOGIC3SOUrce?query and raise an AssertionError if the returned value does not matchvalue.
Info
SEARCH<x>specifies the search number.
Sub-properties
.symbol: TheSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:LOGIC3SOUrce:SYMBolcommand.
logic4source
property
¶
logic4source: SearchSearchItemTriggerADdrwriteLogic4source
Return the SEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:LOGIC4SOUrce command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:LOGIC4SOUrce?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:LOGIC4SOUrce?query and raise an AssertionError if the returned value does not matchvalue.
Info
SEARCH<x>specifies the search number.
Sub-properties
.symbol: TheSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:LOGIC4SOUrce:SYMBolcommand.
margin
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:MARgin command.
Description
- This command sets or queries the DDR write margin reference level value, when the search type is DDR WRITE.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:MARgin?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:MARgin?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:MARgin valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:MARgin <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:MARgin?
Info
NR3sets the DDR write search margin percent value in the range of 0% to 100%.
maxcas
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:MAXCAS command.
Description
- This command sets or queries the DDR write chip select maximum Column Access Strobe (CAS) value.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:MAXCAS?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:MAXCAS?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:MAXCAS valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:MAXCAS <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:MAXCAS?
Info
SEARCH<x>specifies the search number.NR3sets the DDR write chip select CAS maximum value.
mincas
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:MINCas command.
Description
- This command sets or queries the DDR write chip select minimum Column Access Strobe (CAS) value.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:MINCas?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:MINCas?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:MINCas valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:MINCas <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:MINCas?
Info
SEARCH<x>specifies the search number.NR3sets the DDR write chip select CAS minimum value.
postamble
property
¶
postamble: SearchSearchItemTriggerADdrwritePostamble
Return the SEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:POSTAMBLE command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:POSTAMBLE?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:POSTAMBLE?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.length: TheSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:POSTAMBLE:LENGthcommand.
preamble
property
¶
preamble: SearchSearchItemTriggerADdrwritePreamble
Return the SEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:PREAMBLE command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:PREAMBLE?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:PREAMBLE?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.type: TheSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:PREAMBLE:TYPEcommand.
reflevel
property
¶
reflevel: SearchSearchItemTriggerADdrwriteReflevel
Return the SEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:REFLevel command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:REFLevel?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:REFLevel?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.data: TheSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:REFLevel:DATAcommand tree..strobe: TheSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:REFLevel:STROBEcommand tree.
reflevelmode
property
¶
reflevelmode: SearchSearchItemTriggerADdrwriteReflevelmode
Return the SEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:REFLEVELMode command.
Description
- This command sets or queries the DDR write reference level mode to auto or manual, when the search type is DDR WRITE.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:REFLEVELMode?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:REFLEVELMode?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:REFLEVELMode valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:REFLEVELMode {AUTO|MANUAL}
- SEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:REFLEVELMode?
Info
AUTOsets the DDR write reference level mode to auto.MANUALsets the DDR write reference level mode to manual. Use the Related Commands to set the Reference levels when in Manual mode.
standard
property
¶
standard: SearchSearchItemTriggerADdrwriteStandard
Return the SEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:STANdard command.
Description
- This command sets or queries the DDR write search standard as DDR3 or LPDDR3.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:STANdard?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:STANdard?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:STANdard valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:STANdard {DDR3|LPDDR3}
- SEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:STANdard?
Info
DDR3sets the DDR write search standard as DDR3.LPDDR3sets the DDR write search standard as LPDDR3.
strobesource
property
¶
strobesource: SearchSearchItemTriggerADdrwriteStrobesource
Return the SEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:STROBESource command.
Description
- This command sets or queries the DDR write strobe source when the search type is DDR Write.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:STROBESource?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:STROBESource?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:STROBESource valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:STROBESource {CH<x>|CH<x>_D<x<|Math<x>|REF<x>|REF<x>_D<x>}
- SEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:STROBESource?
Info
CH<x>specifies channelas the DDR write strobe source for the specified search . CH<x>_D<x>specifies digital waveformof channel as the DDR write strobe source for the specified search . Math<x>specifies math waveformas the DDR write strobe source for the specified search . REF<x>specifies reference waveformas the DDR write strobe source for the specified search . REF<x>_D<x>specifies digital waveformof reference waveform as the DDR write strobe source for the specified search .
tolerance
property
¶
tolerance: SearchSearchItemTriggerADdrwriteTolerance
Return the SEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:TOLERance command.
Description
- This command sets or queries the DDR write logic state tolerance value.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:TOLERance?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:TOLERance?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:TOLERance valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:TOLERance <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:TOLERance?
Info
SEARCH<x>specifies the search number.NR3sets the logic state tolerance value.
SearchSearchItemTriggerADdrwriteBurstdetectmethod
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:BURSTDETectmethod command.
Description
- This command sets or queries the DDRWRITE search burst detection method.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:BURSTDETectmethod?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:BURSTDETectmethod?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:BURSTDETectmethod valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:BURSTDETectmethod {DQDQS|ChipSelect|LogicState}
- SEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:BURSTDETectmethod?
Info
DQDQSsets the write burst detection method to DQDQS.ChipSelectsets the write burst detection method to ChipSelect.LogicStatesets the write burst detection method to LogicState.
SearchSearchItemTriggerADdrwriteBurstlatency
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:BURSTLatency command.
Description
- This command sets or queries the DDR write logic state burst latency value.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:BURSTLatency?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:BURSTLatency?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:BURSTLatency valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:BURSTLatency <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:BURSTLatency?
Info
SEARCH<x>specifies the search number.NR3sets the logic state burst latency value.
SearchSearchItemTriggerADdrwriteBurstlength
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:BURSTLENGTH command.
Description
- This command sets or queries the DDR write logic state burst length value.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:BURSTLENGTH?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:BURSTLENGTH?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:BURSTLENGTH valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:BURSTLENGTH <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:BURSTLENGTH?
Info
SEARCH<x>specifies the search number.NR1sets the logic state burst length value.
SearchSearchItemTriggerADdrwriteCsactive
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:CSActive command.
Description
- This command sets or queries the DDR write chip select active state.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:CSActive?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:CSActive?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:CSActive valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:CSActive {LOW|HIGH}
- SEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:CSActive?
Info
SEARCH<x>specifies the search number.LOWsets the DDR write chip select active state to low.HIGHsets the DDR write chip select active state to high.
SearchSearchItemTriggerADdrwriteCslevel
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:CSLevel command.
Description
- This command sets or queries the DDR Write chip select level value.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:CSLevel?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:CSLevel?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:CSLevel valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:CSLevel <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:CSLevel?
Info
SEARCH<x>specifies the search number.NR3sets the DDR write chip select level value.
SearchSearchItemTriggerADdrwriteCsmode
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:CSMode command.
Description
- This command sets or queries the DDR Write chip select mode.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:CSMode?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:CSMode?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:CSMode valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:CSMode {Auto|Manual}
- SEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:CSMode?
Info
SEARCH<x>specifies the search number.Autosets the DDR write chip select mode to auto.Manualsets the DDR write chip select mode to manual. Use the Related Commands to set the Reference levels when in Manual mode.
SearchSearchItemTriggerADdrwriteCssource
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:CSSource command.
Description
- This command sets or queries the DDR Write search chip select source.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:CSSource?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:CSSource?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:CSSource valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:CSSource {S<x>_Ch<x>_D<x>|CH<x>|CH<x>_D<x>|Math<x>|REF<x>|REF<x>_D<x>}
- SEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:CSSource?
Info
SEARCH<x>specifies the search number.S<x>_Ch<x>_D<x>specifies is the remote scope number, the analog channel and the digital channel.CH<x>specifies channelas the DDR write chip select source for the specified search . CH<x>_D<x>specifies digital waveformof channel as the DDR write strobe source for the specified search . Math<x>specifies math waveformas the DDR write chip select source for the specified search . REF<x>specifies reference waveformas the DDR write chip select source for the specified search . REF<x>_D<x>specifies digital waveformof reference waveform as the DDR write strobe source for the specified search .
SearchSearchItemTriggerADdrwriteDatarate
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:DATARate command.
Description
- This command sets or queries the DDR write search data rate for DDR3 and LPDRR3 standards of the specified search.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:DATARate?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:DATARate?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:DATARate valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:DATARate {333|800|1066|1200|1333|1466|1600|1866|2133}
- SEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:DATARate?
Info
333sets the data rate to 333.800sets the data rate to 800.1066sets the data rate to 1066.1200sets the data rate to 1200.1333sets the data rate to 1333.1466sets the data rate to 1466.1600sets the data rate to 1600.1866sets the data rate to 1866.2133sets the data rate to 2133.
SearchSearchItemTriggerADdrwriteDatasource
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:DATASource command.
Description
- This command sets or queries the DDR write data source when the search type is DDR Write.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:DATASource?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:DATASource?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:DATASource valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:DATASource {CH<x>|CH<x>_D<x<|Math<x>|REF<x>|REF<x>_D<x>}
- SEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:DATASource?
Info
CH<x>specifies channelas the DDR write data source for the specified search . CH<x>_D<x>specifies digital waveformof channel as the DDR write data source for the specified search . Math<x>specifies math waveformas the DDR write data source for the specified search . REF<x>specifies reference waveformas the DDR write data source for the specified search . REF<x>_D<x>specifies digital waveformof reference waveform as the DDR write data source for the specified search .
SearchSearchItemTriggerADdrwriteHysteresis
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:HYSteresis command.
Description
- This command sets or queries the DDR write hysteresis reference level value, when the search type is DDR WRITE.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:HYSteresis?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:HYSteresis?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:HYSteresis valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:HYSteresis <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:HYSteresis?
Info
NR3sets the DDR write search hysteresis percent value in the range of 0% to 50%.
SearchSearchItemTriggerADdrwriteLogic1source
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:LOGIC1SOUrce command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:LOGIC1SOUrce?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:LOGIC1SOUrce?query and raise an AssertionError if the returned value does not matchvalue.
Info
SEARCH<x>specifies the search number.
Properties
.symbol: TheSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:LOGIC1SOUrce:SYMBolcommand.
symbol
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:LOGIC1SOUrce:SYMBol command.
Description
- This command sets or queries the DDR write logic source 1 symbol.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:LOGIC1SOUrce:SYMBol?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:LOGIC1SOUrce:SYMBol?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:LOGIC1SOUrce:SYMBol valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:LOGIC1SOUrce:SYMBol {H|L|X}
- SEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:LOGIC1SOUrce:SYMBol?
Info
SEARCH<x>specifies the search number.Hsets the logic source 1 symbol to H (High).Lsets the logic source 1 symbol to L (Low).Xsets the logic source 1 symbol to X (Don’t care).
SearchSearchItemTriggerADdrwriteLogic1sourceSymbol
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:LOGIC1SOUrce:SYMBol command.
Description
- This command sets or queries the DDR write logic source 1 symbol.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:LOGIC1SOUrce:SYMBol?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:LOGIC1SOUrce:SYMBol?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:LOGIC1SOUrce:SYMBol valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:LOGIC1SOUrce:SYMBol {H|L|X}
- SEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:LOGIC1SOUrce:SYMBol?
Info
SEARCH<x>specifies the search number.Hsets the logic source 1 symbol to H (High).Lsets the logic source 1 symbol to L (Low).Xsets the logic source 1 symbol to X (Don’t care).
SearchSearchItemTriggerADdrwriteLogic2source
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:LOGIC2SOUrce command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:LOGIC2SOUrce?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:LOGIC2SOUrce?query and raise an AssertionError if the returned value does not matchvalue.
Info
SEARCH<x>specifies the search number.
Properties
.symbol: TheSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:LOGIC2SOUrce:SYMBolcommand.
symbol
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:LOGIC2SOUrce:SYMBol command.
Description
- This command sets or queries the DDR write logic source 2 symbol.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:LOGIC2SOUrce:SYMBol?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:LOGIC2SOUrce:SYMBol?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:LOGIC2SOUrce:SYMBol valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:LOGIC2SOUrce:SYMBol {H|L|X}
- SEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:LOGIC2SOUrce:SYMBol?
Info
SEARCH<x>specifies the search number.Hsets the logic source 2 symbol to H (High).Lsets the logic source 2 symbol to L (Low).Xsets the logic source 2 symbol to X (Don’t care).
SearchSearchItemTriggerADdrwriteLogic2sourceSymbol
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:LOGIC2SOUrce:SYMBol command.
Description
- This command sets or queries the DDR write logic source 2 symbol.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:LOGIC2SOUrce:SYMBol?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:LOGIC2SOUrce:SYMBol?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:LOGIC2SOUrce:SYMBol valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:LOGIC2SOUrce:SYMBol {H|L|X}
- SEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:LOGIC2SOUrce:SYMBol?
Info
SEARCH<x>specifies the search number.Hsets the logic source 2 symbol to H (High).Lsets the logic source 2 symbol to L (Low).Xsets the logic source 2 symbol to X (Don’t care).
SearchSearchItemTriggerADdrwriteLogic3source
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:LOGIC3SOUrce command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:LOGIC3SOUrce?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:LOGIC3SOUrce?query and raise an AssertionError if the returned value does not matchvalue.
Info
SEARCH<x>specifies the search number.
Properties
.symbol: TheSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:LOGIC3SOUrce:SYMBolcommand.
symbol
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:LOGIC3SOUrce:SYMBol command.
Description
- This command sets or queries the DDR write logic source 3 symbol.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:LOGIC3SOUrce:SYMBol?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:LOGIC3SOUrce:SYMBol?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:LOGIC3SOUrce:SYMBol valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:LOGIC3SOUrce:SYMBol {H|L|X}
- SEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:LOGIC3SOUrce:SYMBol?
Info
SEARCH<x>specifies the search number.Hsets the logic source 3 symbol to H (High).Lsets the logic source 3 symbol to L (Low).Xsets the logic source 3 symbol to X (Don’t care).
SearchSearchItemTriggerADdrwriteLogic3sourceSymbol
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:LOGIC3SOUrce:SYMBol command.
Description
- This command sets or queries the DDR write logic source 3 symbol.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:LOGIC3SOUrce:SYMBol?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:LOGIC3SOUrce:SYMBol?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:LOGIC3SOUrce:SYMBol valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:LOGIC3SOUrce:SYMBol {H|L|X}
- SEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:LOGIC3SOUrce:SYMBol?
Info
SEARCH<x>specifies the search number.Hsets the logic source 3 symbol to H (High).Lsets the logic source 3 symbol to L (Low).Xsets the logic source 3 symbol to X (Don’t care).
SearchSearchItemTriggerADdrwriteLogic4source
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:LOGIC4SOUrce command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:LOGIC4SOUrce?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:LOGIC4SOUrce?query and raise an AssertionError if the returned value does not matchvalue.
Info
SEARCH<x>specifies the search number.
Properties
.symbol: TheSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:LOGIC4SOUrce:SYMBolcommand.
symbol
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:LOGIC4SOUrce:SYMBol command.
Description
- This command sets or queries the DDR write logic source 4 symbol.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:LOGIC4SOUrce:SYMBol?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:LOGIC4SOUrce:SYMBol?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:LOGIC4SOUrce:SYMBol valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:LOGIC4SOUrce:SYMBol {H|L|X}
- SEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:LOGIC4SOUrce:SYMBol?
Info
SEARCH<x>specifies the search number.Hsets the logic source 4 symbol to H (High).Lsets the logic source 4 symbol to L (Low).Xsets the logic source 4 symbol to X (Don’t care).
SearchSearchItemTriggerADdrwriteLogic4sourceSymbol
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:LOGIC4SOUrce:SYMBol command.
Description
- This command sets or queries the DDR write logic source 4 symbol.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:LOGIC4SOUrce:SYMBol?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:LOGIC4SOUrce:SYMBol?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:LOGIC4SOUrce:SYMBol valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:LOGIC4SOUrce:SYMBol {H|L|X}
- SEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:LOGIC4SOUrce:SYMBol?
Info
SEARCH<x>specifies the search number.Hsets the logic source 4 symbol to H (High).Lsets the logic source 4 symbol to L (Low).Xsets the logic source 4 symbol to X (Don’t care).
SearchSearchItemTriggerADdrwriteMargin
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:MARgin command.
Description
- This command sets or queries the DDR write margin reference level value, when the search type is DDR WRITE.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:MARgin?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:MARgin?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:MARgin valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:MARgin <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:MARgin?
Info
NR3sets the DDR write search margin percent value in the range of 0% to 100%.
SearchSearchItemTriggerADdrwriteMaxcas
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:MAXCAS command.
Description
- This command sets or queries the DDR write chip select maximum Column Access Strobe (CAS) value.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:MAXCAS?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:MAXCAS?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:MAXCAS valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:MAXCAS <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:MAXCAS?
Info
SEARCH<x>specifies the search number.NR3sets the DDR write chip select CAS maximum value.
SearchSearchItemTriggerADdrwriteMincas
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:MINCas command.
Description
- This command sets or queries the DDR write chip select minimum Column Access Strobe (CAS) value.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:MINCas?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:MINCas?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:MINCas valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:MINCas <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:MINCas?
Info
SEARCH<x>specifies the search number.NR3sets the DDR write chip select CAS minimum value.
SearchSearchItemTriggerADdrwritePostamble
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:POSTAMBLE command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:POSTAMBLE?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:POSTAMBLE?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.length: TheSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:POSTAMBLE:LENGthcommand.
length
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:POSTAMBLE:LENGth command.
Description
- This command sets or queries the DDR write postamble length when the search type is DDR WRITE.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:POSTAMBLE:LENGth?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:POSTAMBLE:LENGth?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:POSTAMBLE:LENGth valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:POSTAMBLE:LENGth {500E-3|1.5|1}
- SEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:POSTAMBLE:LENGth?
Info
500E-1.5sets the postamble length to 1.5 tCK (number of clock cycles).500E-1sets the postamble length to 1 tCK (number of clock cycles).500E-3sets the postamble length to 0.5 tCK (number of clock cycles).
SearchSearchItemTriggerADdrwritePostambleLength
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:POSTAMBLE:LENGth command.
Description
- This command sets or queries the DDR write postamble length when the search type is DDR WRITE.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:POSTAMBLE:LENGth?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:POSTAMBLE:LENGth?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:POSTAMBLE:LENGth valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:POSTAMBLE:LENGth {500E-3|1.5|1}
- SEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:POSTAMBLE:LENGth?
Info
500E-1.5sets the postamble length to 1.5 tCK (number of clock cycles).500E-1sets the postamble length to 1 tCK (number of clock cycles).500E-3sets the postamble length to 0.5 tCK (number of clock cycles).
SearchSearchItemTriggerADdrwritePreamble
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:PREAMBLE command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:PREAMBLE?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:PREAMBLE?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.type: TheSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:PREAMBLE:TYPEcommand.
type
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:PREAMBLE:TYPE command.
Description
- This command sets or queries the DDR write preamble type when the search type is DDR WRITE.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:PREAMBLE:TYPE?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:PREAMBLE:TYPE?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:PREAMBLE:TYPE valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:PREAMBLE:TYPE {STATIC|DYNAMIC}
- SEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:PREAMBLE:TYPE?
Info
STATICsets the DDR Write preamble type to Static.DYNAMICsets the DDR Write preamble type to Dynamic.
SearchSearchItemTriggerADdrwritePreambleType
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:PREAMBLE:TYPE command.
Description
- This command sets or queries the DDR write preamble type when the search type is DDR WRITE.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:PREAMBLE:TYPE?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:PREAMBLE:TYPE?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:PREAMBLE:TYPE valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:PREAMBLE:TYPE {STATIC|DYNAMIC}
- SEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:PREAMBLE:TYPE?
Info
STATICsets the DDR Write preamble type to Static.DYNAMICsets the DDR Write preamble type to Dynamic.
SearchSearchItemTriggerADdrwriteReflevel
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:REFLevel command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:REFLevel?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:REFLevel?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.data: TheSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:REFLevel:DATAcommand tree..strobe: TheSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:REFLevel:STROBEcommand tree.
data
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:REFLevel:DATA command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:REFLevel:DATA?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:REFLevel:DATA?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.high: TheSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:REFLevel:DATA:HIGHcommand..low: TheSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:REFLevel:DATA:LOWcommand..mid: TheSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:REFLevel:DATA:MIDcommand.
strobe
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:REFLevel:STROBE command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:REFLevel:STROBE?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:REFLevel:STROBE?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.high: TheSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:REFLevel:STROBE:HIGHcommand..low: TheSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:REFLevel:STROBE:LOWcommand..mid: TheSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:REFLevel:STROBE:MIDcommand.
SearchSearchItemTriggerADdrwriteReflevelData
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:REFLevel:DATA command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:REFLevel:DATA?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:REFLevel:DATA?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.high: TheSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:REFLevel:DATA:HIGHcommand..low: TheSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:REFLevel:DATA:LOWcommand..mid: TheSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:REFLevel:DATA:MIDcommand.
high
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:REFLevel:DATA:HIGH command.
Description
- This command sets or queries the DDR write data high reference level value, when the search type is DDR WRITE.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:REFLevel:DATA:HIGH?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:REFLevel:DATA:HIGH?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:REFLevel:DATA:HIGH valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:REFLevel:DATA:HIGH <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:REFLevel:DATA:HIGH?
Info
NR3sets the DDR read search data high reference value.
low
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:REFLevel:DATA:LOW command.
Description
- This command sets or queries the DDR write data low reference level value, when the search type is DDR WRITE.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:REFLevel:DATA:LOW?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:REFLevel:DATA:LOW?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:REFLevel:DATA:LOW valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:REFLevel:DATA:LOW <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:REFLevel:DATA:LOW?
Info
NR3sets the DDR read search data low reference value.
mid
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:REFLevel:DATA:MID command.
Description
- This command sets or queries the DDR write data mid reference level value, when the search type is DDR WRITE.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:REFLevel:DATA:MID?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:REFLevel:DATA:MID?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:REFLevel:DATA:MID valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:REFLevel:DATA:MID <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:REFLevel:DATA:MID?
Info
NR3sets the DDR read search data mid reference value.
SearchSearchItemTriggerADdrwriteReflevelDataHigh
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:REFLevel:DATA:HIGH command.
Description
- This command sets or queries the DDR write data high reference level value, when the search type is DDR WRITE.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:REFLevel:DATA:HIGH?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:REFLevel:DATA:HIGH?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:REFLevel:DATA:HIGH valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:REFLevel:DATA:HIGH <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:REFLevel:DATA:HIGH?
Info
NR3sets the DDR read search data high reference value.
SearchSearchItemTriggerADdrwriteReflevelDataLow
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:REFLevel:DATA:LOW command.
Description
- This command sets or queries the DDR write data low reference level value, when the search type is DDR WRITE.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:REFLevel:DATA:LOW?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:REFLevel:DATA:LOW?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:REFLevel:DATA:LOW valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:REFLevel:DATA:LOW <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:REFLevel:DATA:LOW?
Info
NR3sets the DDR read search data low reference value.
SearchSearchItemTriggerADdrwriteReflevelDataMid
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:REFLevel:DATA:MID command.
Description
- This command sets or queries the DDR write data mid reference level value, when the search type is DDR WRITE.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:REFLevel:DATA:MID?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:REFLevel:DATA:MID?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:REFLevel:DATA:MID valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:REFLevel:DATA:MID <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:REFLevel:DATA:MID?
Info
NR3sets the DDR read search data mid reference value.
SearchSearchItemTriggerADdrwriteReflevelStrobe
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:REFLevel:STROBE command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:REFLevel:STROBE?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:REFLevel:STROBE?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.high: TheSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:REFLevel:STROBE:HIGHcommand..low: TheSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:REFLevel:STROBE:LOWcommand..mid: TheSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:REFLevel:STROBE:MIDcommand.
high
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:REFLevel:STROBE:HIGH command.
Description
- This command sets or queries the DDR write reference level strobe high value, when the search type is DDR WRITE.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:REFLevel:STROBE:HIGH?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:REFLevel:STROBE:HIGH?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:REFLevel:STROBE:HIGH valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:REFLevel:STROBE:HIGH <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:REFLevel:STROBE:HIGH?
Info
NR3sets the DDR write search strobe high value.
low
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:REFLevel:STROBE:LOW command.
Description
- This command sets or queries the DDR write reference level strobe low value, when the search type is DDR WRITE.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:REFLevel:STROBE:LOW?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:REFLevel:STROBE:LOW?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:REFLevel:STROBE:LOW valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:REFLevel:STROBE:LOW <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:REFLevel:STROBE:LOW?
Info
NR3sets the DDR read search strobe low reference value.
mid
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:REFLevel:STROBE:MID command.
Description
- This command sets or queries the DDR write reference level strobe mid value, when the search type is DDR WRITE.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:REFLevel:STROBE:MID?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:REFLevel:STROBE:MID?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:REFLevel:STROBE:MID valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:REFLevel:STROBE:MID <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:REFLevel:STROBE:MID?
Info
NR3sets the DDR read search strobe mid reference value.
SearchSearchItemTriggerADdrwriteReflevelStrobeHigh
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:REFLevel:STROBE:HIGH command.
Description
- This command sets or queries the DDR write reference level strobe high value, when the search type is DDR WRITE.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:REFLevel:STROBE:HIGH?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:REFLevel:STROBE:HIGH?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:REFLevel:STROBE:HIGH valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:REFLevel:STROBE:HIGH <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:REFLevel:STROBE:HIGH?
Info
NR3sets the DDR write search strobe high value.
SearchSearchItemTriggerADdrwriteReflevelStrobeLow
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:REFLevel:STROBE:LOW command.
Description
- This command sets or queries the DDR write reference level strobe low value, when the search type is DDR WRITE.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:REFLevel:STROBE:LOW?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:REFLevel:STROBE:LOW?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:REFLevel:STROBE:LOW valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:REFLevel:STROBE:LOW <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:REFLevel:STROBE:LOW?
Info
NR3sets the DDR read search strobe low reference value.
SearchSearchItemTriggerADdrwriteReflevelStrobeMid
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:REFLevel:STROBE:MID command.
Description
- This command sets or queries the DDR write reference level strobe mid value, when the search type is DDR WRITE.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:REFLevel:STROBE:MID?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:REFLevel:STROBE:MID?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:REFLevel:STROBE:MID valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:REFLevel:STROBE:MID <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:REFLevel:STROBE:MID?
Info
NR3sets the DDR read search strobe mid reference value.
SearchSearchItemTriggerADdrwriteReflevelmode
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:REFLEVELMode command.
Description
- This command sets or queries the DDR write reference level mode to auto or manual, when the search type is DDR WRITE.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:REFLEVELMode?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:REFLEVELMode?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:REFLEVELMode valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:REFLEVELMode {AUTO|MANUAL}
- SEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:REFLEVELMode?
Info
AUTOsets the DDR write reference level mode to auto.MANUALsets the DDR write reference level mode to manual. Use the Related Commands to set the Reference levels when in Manual mode.
SearchSearchItemTriggerADdrwriteStandard
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:STANdard command.
Description
- This command sets or queries the DDR write search standard as DDR3 or LPDDR3.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:STANdard?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:STANdard?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:STANdard valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:STANdard {DDR3|LPDDR3}
- SEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:STANdard?
Info
DDR3sets the DDR write search standard as DDR3.LPDDR3sets the DDR write search standard as LPDDR3.
SearchSearchItemTriggerADdrwriteStrobesource
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:STROBESource command.
Description
- This command sets or queries the DDR write strobe source when the search type is DDR Write.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:STROBESource?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:STROBESource?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:STROBESource valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:STROBESource {CH<x>|CH<x>_D<x<|Math<x>|REF<x>|REF<x>_D<x>}
- SEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:STROBESource?
Info
CH<x>specifies channelas the DDR write strobe source for the specified search . CH<x>_D<x>specifies digital waveformof channel as the DDR write strobe source for the specified search . Math<x>specifies math waveformas the DDR write strobe source for the specified search . REF<x>specifies reference waveformas the DDR write strobe source for the specified search . REF<x>_D<x>specifies digital waveformof reference waveform as the DDR write strobe source for the specified search .
SearchSearchItemTriggerADdrwriteTolerance
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:TOLERance command.
Description
- This command sets or queries the DDR write logic state tolerance value.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:TOLERance?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:TOLERance?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:TOLERance valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:TOLERance <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:DDRWRITE:TOLERance?
Info
SEARCH<x>specifies the search number.NR3sets the logic state tolerance value.
SearchSearchItemTriggerAEdge
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:EDGE command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:EDGE?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:EDGE?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.slope: TheSEARCH:SEARCH<x>:TRIGger:A:EDGE:SLOpecommand..source: TheSEARCH:SEARCH<x>:TRIGger:A:EDGE:SOUrcecommand..threshold: TheSEARCH:SEARCH<x>:TRIGger:A:EDGE:THResholdcommand.
slope
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:EDGE:SLOpe command.
Description
- This command sets or queries the slope for an edge trigger search to determine where to place a mark. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:EDGE:SLOpe?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:EDGE:SLOpe?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:EDGE:SLOpe valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:EDGE:SLOpe {RISe|FALL|EITher}
- SEARCH:SEARCH<x>:TRIGger:A:EDGE:SLOpe?
Info
RISespecifies a rising edge.FALLspecifies a falling edge.EITherspecifies either rising or falling edge.
source
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:EDGE:SOUrce command.
Description
- This command sets or queries the source waveform for an edge trigger search to determine where to place a mark. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:EDGE:SOUrce?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:EDGE:SOUrce?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:EDGE:SOUrce valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:EDGE:SOUrce {S<x>_Ch<x>_D<x>|CH<x>|CH<x>_D<x>|MATH<x>|REF<x>|REF<x>_D<x>}
- SEARCH:SEARCH<x>:TRIGger:A:EDGE:SOUrce?
Info
S<x>_Ch<x>_D<x>specifies is the remote scope number, the analog channel and the digital channel.CH<x>specifies one input channel as the source, where the channel number is specified by x.CH<x>_D<x>specifies a digital reference waveform as the source waveform for the specified search.MATH<x>specifies the math waveform as the search source, where the math number is specified by x.REF<x>specifies the reference waveform as the search source, where the reference number is specified by x.REF<x>_D<x>specifies a digital reference waveform as the source waveform for the specified search.
threshold
property
¶
threshold: SearchSearchItemTriggerAEdgeThreshold
Return the SEARCH:SEARCH<x>:TRIGger:A:EDGE:THReshold command.
Description
- This command sets or queries the source threshold level for an edge trigger search to determine where to place a mark. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:EDGE:THReshold?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:EDGE:THReshold?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:EDGE:THReshold valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:EDGE:THReshold <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:EDGE:THReshold?
Info
<NR3>is the source threshold level for an edge trigger search.
SearchSearchItemTriggerAEdgeSlope
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:EDGE:SLOpe command.
Description
- This command sets or queries the slope for an edge trigger search to determine where to place a mark. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:EDGE:SLOpe?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:EDGE:SLOpe?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:EDGE:SLOpe valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:EDGE:SLOpe {RISe|FALL|EITher}
- SEARCH:SEARCH<x>:TRIGger:A:EDGE:SLOpe?
Info
RISespecifies a rising edge.FALLspecifies a falling edge.EITherspecifies either rising or falling edge.
SearchSearchItemTriggerAEdgeSource
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:EDGE:SOUrce command.
Description
- This command sets or queries the source waveform for an edge trigger search to determine where to place a mark. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:EDGE:SOUrce?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:EDGE:SOUrce?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:EDGE:SOUrce valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:EDGE:SOUrce {S<x>_Ch<x>_D<x>|CH<x>|CH<x>_D<x>|MATH<x>|REF<x>|REF<x>_D<x>}
- SEARCH:SEARCH<x>:TRIGger:A:EDGE:SOUrce?
Info
S<x>_Ch<x>_D<x>specifies is the remote scope number, the analog channel and the digital channel.CH<x>specifies one input channel as the source, where the channel number is specified by x.CH<x>_D<x>specifies a digital reference waveform as the source waveform for the specified search.MATH<x>specifies the math waveform as the search source, where the math number is specified by x.REF<x>specifies the reference waveform as the search source, where the reference number is specified by x.REF<x>_D<x>specifies a digital reference waveform as the source waveform for the specified search.
SearchSearchItemTriggerAEdgeThreshold
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:EDGE:THReshold command.
Description
- This command sets or queries the source threshold level for an edge trigger search to determine where to place a mark. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:EDGE:THReshold?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:EDGE:THReshold?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:EDGE:THReshold valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:EDGE:THReshold <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:EDGE:THReshold?
Info
<NR3>is the source threshold level for an edge trigger search.
SearchSearchItemTriggerALogic
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:LOGIc command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:LOGIc?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:LOGIc?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.clock: TheSEARCH:SEARCH<x>:TRIGger:A:LOGIc:CLOCkcommand tree..deltatime: TheSEARCH:SEARCH<x>:TRIGger:A:LOGIc:DELTatimecommand..function: TheSEARCH:SEARCH<x>:TRIGger:A:LOGIc:FUNCtioncommand..input: TheSEARCH:SEARCH<x>:TRIGger:A:LOGIc:INPUTcommand tree..level: TheSEARCH:SEARCH<x>:TRIGger:A:LOGIc:LEVelcommand tree..logicpattern: TheSEARCH:SEARCH<x>:TRIGger:A:LOGIc:LOGICPatterncommand tree..polarity: TheSEARCH:SEARCH<x>:TRIGger:A:LOGIc:POLaritycommand..useclockedge: TheSEARCH:SEARCH<x>:TRIGger:A:LOGIc:USEClockedgecommand..when: TheSEARCH:SEARCH<x>:TRIGger:A:LOGIc:WHEncommand.
clock
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:CLOCk command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:LOGIc:CLOCk?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:LOGIc:CLOCk?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.threshold: TheSEARCH:SEARCH<x>:TRIGger:A:LOGIc:CLOCk:THResholdcommand.
deltatime
property
¶
deltatime: SearchSearchItemTriggerALogicDeltatime
Return the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:DELTatime command.
Description
- This command specifies the Logic search delta time value. The time value is used as part of the Logic search condition to determine if the duration of a logic pattern meets the specified time constraints. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:LOGIc:DELTatime?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:LOGIc:DELTatime?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:LOGIc:DELTatime valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:DELTatime <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:DELTatime?
Info
<NR3>is delta time value.
function
property
¶
function: SearchSearchItemTriggerALogicFunction
Return the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:FUNCtion command.
Description
- This command sets or queries the logic operator for a pattern or state trigger search to determine where to place a mark. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:LOGIc:FUNCtion?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:LOGIc:FUNCtion?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:LOGIc:FUNCtion valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:FUNCtion {AND|NANd|NOR|OR}
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:FUNCtion?
Info
ANDplaces a mark if all conditions are true.NANdplaces a mark if any of the conditions are false.NORplaces a mark if all conditions are false.ORplaces a mark if any of the conditions are true.
input
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:INPUT command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:LOGIc:INPUT?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:LOGIc:INPUT?query and raise an AssertionError if the returned value does not matchvalue.
Info
CH<x>specifies one input channel as the source, where the channel number is specified by x.
Sub-properties
.clock: TheSEARCH:SEARCH<x>:TRIGger:A:LOGIc:INPUT:CLOCKcommand tree.
level
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LEVel command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:LOGIc:LEVel?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:LOGIc:LEVel?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.ch: TheSEARCH:SEARCH<x>:TRIGger:A:LOGIc:LEVel:CH<x>command..math: TheSEARCH:SEARCH<x>:TRIGger:A:LOGIc:LEVel:MATH<x>command..ref: TheSEARCH:SEARCH<x>:TRIGger:A:LOGIc:LEVel:REF<x>command.
logicpattern
property
¶
logicpattern: SearchSearchItemTriggerALogicLogicpattern
Return the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LOGICPattern command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:LOGIc:LOGICPattern?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:LOGIc:LOGICPattern?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.ch: TheSEARCH:SEARCH<x>:TRIGger:A:LOGIc:LOGICPattern:CH<x>command..math: TheSEARCH:SEARCH<x>:TRIGger:A:LOGIc:LOGICPattern:MATH<x>command..ref: TheSEARCH:SEARCH<x>:TRIGger:A:LOGIc:LOGICPattern:REF<x>command.
polarity
property
¶
polarity: SearchSearchItemTriggerALogicPolarity
Return the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:POLarity command.
Description
- This command sets or queries the polarity for the clock channel when Use Clock Edge is set to Yes for Logic search type. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:LOGIc:POLarity?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:LOGIc:POLarity?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:LOGIc:POLarity valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:POLarity {POSitive|NEGative|EITher}
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:POLarity?
Info
POSitivespecifies using the positive clock edge.NEGativespecifies using negative clock edge.EITherspecifies using either the positive or negative clock edge.
useclockedge
property
¶
useclockedge: SearchSearchItemTriggerALogicUseclockedge
Return the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:USEClockedge command.
Description
- This command specifies whether or not Logic search uses a clock source. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:LOGIc:USEClockedge?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:LOGIc:USEClockedge?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:LOGIc:USEClockedge valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:USEClockedge {ON|OFF|1|0}
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:USEClockedge?
Info
OFFspecifies not to use the clock source.ONspecifies to use the clock source.0specifies not to use the clock source.1specifies to use the clock source.
when
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:WHEn command.
Description
- This command sets or queries the condition for generating an A or B logic search with respect to the defined input pattern.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:LOGIc:WHEn?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:LOGIc:WHEn?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:LOGIc:WHEn valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:WHEn {TRUe|FALSe|MOREThan|LESSThan|EQual|UNEQual}
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:WHEn?
Info
TRUesearches on an input value that is true.FALSesearches on an input value that is false.MOREthansearches on an input value that is greater than a set value.LESSthansearches on an input value that is less than a set value.EQualsearches on an input value that is equal to a set value.UNEQualsearches on an input value that is not equal to a set value.
SearchSearchItemTriggerALogicClock
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:LOGIc:CLOCk command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:LOGIc:CLOCk?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:LOGIc:CLOCk?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.threshold: TheSEARCH:SEARCH<x>:TRIGger:A:LOGIc:CLOCk:THResholdcommand.
threshold
property
¶
threshold: SearchSearchItemTriggerALogicClockThreshold
Return the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:CLOCk:THReshold command.
Description
- This command sets or queries the logic clock threshold for a logic trigger search to determine where to place a mark. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:LOGIc:CLOCk:THReshold?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:LOGIc:CLOCk:THReshold?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:LOGIc:CLOCk:THReshold valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:CLOCk:THReshold <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:CLOCk:THReshold?
Info
<NR3>is the logic clock threshold.
SearchSearchItemTriggerALogicClockThreshold
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:LOGIc:CLOCk:THReshold command.
Description
- This command sets or queries the logic clock threshold for a logic trigger search to determine where to place a mark. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:LOGIc:CLOCk:THReshold?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:LOGIc:CLOCk:THReshold?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:LOGIc:CLOCk:THReshold valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:CLOCk:THReshold <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:CLOCk:THReshold?
Info
<NR3>is the logic clock threshold.
SearchSearchItemTriggerALogicDeltatime
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:LOGIc:DELTatime command.
Description
- This command specifies the Logic search delta time value. The time value is used as part of the Logic search condition to determine if the duration of a logic pattern meets the specified time constraints. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:LOGIc:DELTatime?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:LOGIc:DELTatime?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:LOGIc:DELTatime valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:DELTatime <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:DELTatime?
Info
<NR3>is delta time value.
SearchSearchItemTriggerALogicFunction
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:LOGIc:FUNCtion command.
Description
- This command sets or queries the logic operator for a pattern or state trigger search to determine where to place a mark. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:LOGIc:FUNCtion?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:LOGIc:FUNCtion?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:LOGIc:FUNCtion valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:FUNCtion {AND|NANd|NOR|OR}
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:FUNCtion?
Info
ANDplaces a mark if all conditions are true.NANdplaces a mark if any of the conditions are false.NORplaces a mark if all conditions are false.ORplaces a mark if any of the conditions are true.
SearchSearchItemTriggerALogicInput
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:LOGIc:INPUT command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:LOGIc:INPUT?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:LOGIc:INPUT?query and raise an AssertionError if the returned value does not matchvalue.
Info
CH<x>specifies one input channel as the source, where the channel number is specified by x.
Properties
.clock: TheSEARCH:SEARCH<x>:TRIGger:A:LOGIc:INPUT:CLOCKcommand tree.
clock
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:INPUT:CLOCK command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:LOGIc:INPUT:CLOCK?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:LOGIc:INPUT:CLOCK?query and raise an AssertionError if the returned value does not matchvalue.
Info
CH<x>specifies one input channel as the source, where the channel number is specified by x.
Sub-properties
.source: TheSEARCH:SEARCH<x>:TRIGger:A:LOGIc:INPUT:CLOCK:SOUrcecommand.
SearchSearchItemTriggerALogicInputClock
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:LOGIc:INPUT:CLOCK command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:LOGIc:INPUT:CLOCK?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:LOGIc:INPUT:CLOCK?query and raise an AssertionError if the returned value does not matchvalue.
Info
CH<x>specifies one input channel as the source, where the channel number is specified by x.
Properties
.source: TheSEARCH:SEARCH<x>:TRIGger:A:LOGIc:INPUT:CLOCK:SOUrcecommand.
source
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:INPUT:CLOCK:SOUrce command.
Description
- This command specifies or queries the channel to use as the clock source for logic trigger. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:LOGIc:INPUT:CLOCK:SOUrce?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:LOGIc:INPUT:CLOCK:SOUrce?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:LOGIc:INPUT:CLOCK:SOUrce valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:INPUT:CLOCK:SOUrce {S<x>_Ch<x>_D|CH<x>|CH<x>_D<x>|REF<x>_D<x>}
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:INPUT:CLOCK:SOUrce?
Info
S<x>_Ch<x>_D<x>specifies is the remote scope number, the analog channel and the digital channel.CH<x>specifies one input channel as the source, where the channel number is specified by x.CH<x>_D<x>specifies a digital reference waveform as the source waveform for the specified search.REF<x>_D<x>specifies a digital reference waveform as the source waveform for the specified search.
SearchSearchItemTriggerALogicInputClockSource
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:LOGIc:INPUT:CLOCK:SOUrce command.
Description
- This command specifies or queries the channel to use as the clock source for logic trigger. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:LOGIc:INPUT:CLOCK:SOUrce?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:LOGIc:INPUT:CLOCK:SOUrce?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:LOGIc:INPUT:CLOCK:SOUrce valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:INPUT:CLOCK:SOUrce {S<x>_Ch<x>_D|CH<x>|CH<x>_D<x>|REF<x>_D<x>}
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:INPUT:CLOCK:SOUrce?
Info
S<x>_Ch<x>_D<x>specifies is the remote scope number, the analog channel and the digital channel.CH<x>specifies one input channel as the source, where the channel number is specified by x.CH<x>_D<x>specifies a digital reference waveform as the source waveform for the specified search.REF<x>_D<x>specifies a digital reference waveform as the source waveform for the specified search.
SearchSearchItemTriggerALogicLevel
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LEVel command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:LOGIc:LEVel?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:LOGIc:LEVel?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.ch: TheSEARCH:SEARCH<x>:TRIGger:A:LOGIc:LEVel:CH<x>command..math: TheSEARCH:SEARCH<x>:TRIGger:A:LOGIc:LEVel:MATH<x>command..ref: TheSEARCH:SEARCH<x>:TRIGger:A:LOGIc:LEVel:REF<x>command.
ch
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LEVel:CH<x> command.
Description
- This command sets or queries the voltage level to use for logic trigger search. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:LOGIc:LEVel:CH<x>?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:LOGIc:LEVel:CH<x>?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:LOGIc:LEVel:CH<x> valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LEVel:CH<x> <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LEVel:CH<x>?
Info
<NR3>is the voltage level to use for logic trigger search.
math
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LEVel:MATH<x> command.
Description
- This command sets the voltage level to use for logic trigger search. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:LOGIc:LEVel:MATH<x>?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:LOGIc:LEVel:MATH<x>?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:LOGIc:LEVel:MATH<x> valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LEVel:MATH<x> <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LEVel:MATH<x>?
Info
<NR3>is the voltage level to use for logic trigger search.
ref
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LEVel:REF<x> command.
Description
- This command sets the voltage level to use for logic trigger search. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:LOGIc:LEVel:REF<x>?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:LOGIc:LEVel:REF<x>?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:LOGIc:LEVel:REF<x> valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LEVel:REF<x> <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LEVel:REF<x>?
Info
<NR3>is the voltage level to use for logic trigger search.
SearchSearchItemTriggerALogicLevelChannel
¶
Bases: ValidatedChannel, SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LEVel:CH<x> command.
Description
- This command sets or queries the voltage level to use for logic trigger search. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:LOGIc:LEVel:CH<x>?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:LOGIc:LEVel:CH<x>?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:LOGIc:LEVel:CH<x> valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LEVel:CH<x> <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LEVel:CH<x>?
Info
<NR3>is the voltage level to use for logic trigger search.
SearchSearchItemTriggerALogicLevelMathItem
¶
Bases: ValidatedDynamicNumberCmd, SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LEVel:MATH<x> command.
Description
- This command sets the voltage level to use for logic trigger search. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:LOGIc:LEVel:MATH<x>?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:LOGIc:LEVel:MATH<x>?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:LOGIc:LEVel:MATH<x> valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LEVel:MATH<x> <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LEVel:MATH<x>?
Info
<NR3>is the voltage level to use for logic trigger search.
SearchSearchItemTriggerALogicLevelRefItem
¶
Bases: ValidatedDynamicNumberCmd, SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LEVel:REF<x> command.
Description
- This command sets the voltage level to use for logic trigger search. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:LOGIc:LEVel:REF<x>?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:LOGIc:LEVel:REF<x>?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:LOGIc:LEVel:REF<x> valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LEVel:REF<x> <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LEVel:REF<x>?
Info
<NR3>is the voltage level to use for logic trigger search.
SearchSearchItemTriggerALogicLogicpattern
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LOGICPattern command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:LOGIc:LOGICPattern?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:LOGIc:LOGICPattern?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.ch: TheSEARCH:SEARCH<x>:TRIGger:A:LOGIc:LOGICPattern:CH<x>command..math: TheSEARCH:SEARCH<x>:TRIGger:A:LOGIc:LOGICPattern:MATH<x>command..ref: TheSEARCH:SEARCH<x>:TRIGger:A:LOGIc:LOGICPattern:REF<x>command.
ch
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LOGICPattern:CH<x> command.
Description
- This command sets or queries the conditions used for generating an A logic pattern, with respect to the defined input pattern, and identifies the time that the selected pattern may be true and still generate the trigger. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:LOGIc:LOGICPattern:CH<x>?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:LOGIc:LOGICPattern:CH<x>?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:LOGIc:LOGICPattern:CH<x> valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LOGICPattern:CH<x> {H|L|X}
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LOGICPattern:CH<x>?
Info
Hspecifies triggering when the pattern is high.Lspecifies triggering when the pattern is low.Xspecifies triggering when the pattern is high or low.
Sub-properties
.d: TheSEARCH:SEARCH<x>:TRIGger:A:LOGIc:LOGICPattern:CH<x>_D<x>command.
math
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LOGICPattern:MATH<x> command.
Description
- This command sets or queries the conditions used for generating an A logic pattern, with respect to the defined input pattern, and identifies the time that the selected pattern may be true and still generate the trigger. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:LOGIc:LOGICPattern:MATH<x>?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:LOGIc:LOGICPattern:MATH<x>?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:LOGIc:LOGICPattern:MATH<x> valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LOGICPattern:MATH<x> {H|L|X}
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LOGICPattern:MATH<x>?
Info
Hspecifies triggering when the pattern is high.Lspecifies triggering when the pattern is low.Xspecifies triggering when the pattern is high or low.
ref
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LOGICPattern:REF<x> command.
Description
- This command sets or queries the conditions used for generating an A logic pattern, with respect to the defined input pattern, and identifies the time that the selected pattern may be true and still generate the trigger. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:LOGIc:LOGICPattern:REF<x>?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:LOGIc:LOGICPattern:REF<x>?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:LOGIc:LOGICPattern:REF<x> valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LOGICPattern:REF<x> {H|L|X}
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LOGICPattern:REF<x>?
Info
Hspecifies triggering when the pattern is high.Lspecifies triggering when the pattern is low.Xspecifies triggering when the pattern is high or low.
SearchSearchItemTriggerALogicLogicpatternChannel
¶
Bases: ValidatedChannel, SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LOGICPattern:CH<x> command.
Description
- This command sets or queries the conditions used for generating an A logic pattern, with respect to the defined input pattern, and identifies the time that the selected pattern may be true and still generate the trigger. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:LOGIc:LOGICPattern:CH<x>?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:LOGIc:LOGICPattern:CH<x>?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:LOGIc:LOGICPattern:CH<x> valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LOGICPattern:CH<x> {H|L|X}
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LOGICPattern:CH<x>?
Info
Hspecifies triggering when the pattern is high.Lspecifies triggering when the pattern is low.Xspecifies triggering when the pattern is high or low.
Properties
.d: TheSEARCH:SEARCH<x>:TRIGger:A:LOGIc:LOGICPattern:CH<x>_D<x>command.
d
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LOGICPattern:CH<x>_D<x> command.
Description
- This command sets or queries the conditions used for generating an A logic pattern, with respect to the defined input pattern, and identifies the time that the selected pattern may be true and still generate the trigger. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:LOGIc:LOGICPattern:CH<x>_D<x>?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:LOGIc:LOGICPattern:CH<x>_D<x>?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:LOGIc:LOGICPattern:CH<x>_D<x> valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LOGICPattern:CH<x>_D<x> {H|L|X}
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LOGICPattern:CH<x>_D<x>?
Info
Hspecifies triggering when the pattern is high.Lspecifies triggering when the pattern is low.Xspecifies triggering when the pattern is high or low.
SearchSearchItemTriggerALogicLogicpatternChannelDigitalBit
¶
Bases: ValidatedDigitalBit, SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LOGICPattern:CH<x>_D<x> command.
Description
- This command sets or queries the conditions used for generating an A logic pattern, with respect to the defined input pattern, and identifies the time that the selected pattern may be true and still generate the trigger. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:LOGIc:LOGICPattern:CH<x>_D<x>?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:LOGIc:LOGICPattern:CH<x>_D<x>?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:LOGIc:LOGICPattern:CH<x>_D<x> valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LOGICPattern:CH<x>_D<x> {H|L|X}
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LOGICPattern:CH<x>_D<x>?
Info
Hspecifies triggering when the pattern is high.Lspecifies triggering when the pattern is low.Xspecifies triggering when the pattern is high or low.
SearchSearchItemTriggerALogicLogicpatternMathItem
¶
Bases: ValidatedDynamicNumberCmd, SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LOGICPattern:MATH<x> command.
Description
- This command sets or queries the conditions used for generating an A logic pattern, with respect to the defined input pattern, and identifies the time that the selected pattern may be true and still generate the trigger. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:LOGIc:LOGICPattern:MATH<x>?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:LOGIc:LOGICPattern:MATH<x>?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:LOGIc:LOGICPattern:MATH<x> valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LOGICPattern:MATH<x> {H|L|X}
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LOGICPattern:MATH<x>?
Info
Hspecifies triggering when the pattern is high.Lspecifies triggering when the pattern is low.Xspecifies triggering when the pattern is high or low.
SearchSearchItemTriggerALogicLogicpatternRefItem
¶
Bases: ValidatedDynamicNumberCmd, SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LOGICPattern:REF<x> command.
Description
- This command sets or queries the conditions used for generating an A logic pattern, with respect to the defined input pattern, and identifies the time that the selected pattern may be true and still generate the trigger. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:LOGIc:LOGICPattern:REF<x>?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:LOGIc:LOGICPattern:REF<x>?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:LOGIc:LOGICPattern:REF<x> valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LOGICPattern:REF<x> {H|L|X}
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LOGICPattern:REF<x>?
Info
Hspecifies triggering when the pattern is high.Lspecifies triggering when the pattern is low.Xspecifies triggering when the pattern is high or low.
SearchSearchItemTriggerALogicPolarity
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:LOGIc:POLarity command.
Description
- This command sets or queries the polarity for the clock channel when Use Clock Edge is set to Yes for Logic search type. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:LOGIc:POLarity?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:LOGIc:POLarity?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:LOGIc:POLarity valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:POLarity {POSitive|NEGative|EITher}
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:POLarity?
Info
POSitivespecifies using the positive clock edge.NEGativespecifies using negative clock edge.EITherspecifies using either the positive or negative clock edge.
SearchSearchItemTriggerALogicUseclockedge
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:LOGIc:USEClockedge command.
Description
- This command specifies whether or not Logic search uses a clock source. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:LOGIc:USEClockedge?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:LOGIc:USEClockedge?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:LOGIc:USEClockedge valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:USEClockedge {ON|OFF|1|0}
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:USEClockedge?
Info
OFFspecifies not to use the clock source.ONspecifies to use the clock source.0specifies not to use the clock source.1specifies to use the clock source.
SearchSearchItemTriggerALogicWhen
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:LOGIc:WHEn command.
Description
- This command sets or queries the condition for generating an A or B logic search with respect to the defined input pattern.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:LOGIc:WHEn?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:LOGIc:WHEn?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:LOGIc:WHEn valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:WHEn {TRUe|FALSe|MOREThan|LESSThan|EQual|UNEQual}
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:WHEn?
Info
TRUesearches on an input value that is true.FALSesearches on an input value that is false.MOREthansearches on an input value that is greater than a set value.LESSthansearches on an input value that is less than a set value.EQualsearches on an input value that is equal to a set value.UNEQualsearches on an input value that is not equal to a set value.
SearchSearchItemTriggerAPulsewidth
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:PULSEWidth?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:PULSEWidth?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.highlimit: TheSEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:HIGHLimitcommand..logicqualification: TheSEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:LOGICQUALificationcommand..lowlimit: TheSEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:LOWLimitcommand..polarity: TheSEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:POLaritycommand..source: TheSEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:SOUrcecommand..threshold: TheSEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:THResholdcommand..when: TheSEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:WHEncommand.
highlimit
property
¶
highlimit: SearchSearchItemTriggerAPulsewidthHighlimit
Return the SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:HIGHLimit command.
Description
- This command specifies the upper limit to use, in seconds, when searching for a pulse whose duration is inside or outside a range of two values. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:HIGHLimit?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:HIGHLimit?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:HIGHLimit valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:HIGHLimit <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:HIGHLimit?
Info
<NR3>is the upper limit to use, in seconds, when searching for a pulse.
logicqualification
property
¶
logicqualification: SearchSearchItemTriggerAPulsewidthLogicqualification
Return the SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:LOGICQUALification command.
Description
- This command specifies whether or not to use logic qualification for a pulse width search. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:LOGICQUALification?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:LOGICQUALification?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:LOGICQUALification valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:LOGICQUALification {ON|OFF}
- SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:LOGICQUALification?
Info
ONspecifies to use logic qualification.OFFspecifies not to use logic qualification.
lowlimit
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:LOWLimit command.
Description
- This command specifies the lower limit to use, in seconds, when searching for a pulse whose duration is inside or outside a range of two values. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:LOWLimit?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:LOWLimit?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:LOWLimit valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:LOWLimit <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:LOWLimit?
Info
<NR3>is the lower limit to use, in seconds, when searching for a pulse.
polarity
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:POLarity command.
Description
- This command specifies the polarity for a pulse width search. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:POLarity?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:POLarity?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:POLarity valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:POLarity {POSitive|NEGative}
- SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:POLarity?
Info
POSitivespecifies positive polarity for a pulse width search.NEGativespecifies negative polarity for a pulse width search.
source
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:SOUrce command.
Description
- This command sets and queries the source for the pulse width search input. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:SOUrce?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:SOUrce?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:SOUrce valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:SOUrce {S<x>_Ch<x>_D|CH<x>|CH<x>_D<x>|REF<x>|REF<x>_D<x>}
- SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:SOUrce?
Info
S<x>_Ch<x>_D<x>specifies is the remote scope number, the analog channel and the digital channel.CH<x>specifies one input channel as the source, where the channel number is specified by x.CH<x>_D<x>specifies a digital reference waveform as the source waveform for the specified search.REF<x>specifies the reference waveform as the search source, where the reference number is specified by x.REF<x>_D<x>specifies a digital reference waveform as the source waveform for the specified search.
threshold
property
¶
threshold: SearchSearchItemTriggerAPulsewidthThreshold
Return the SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:THReshold command.
Description
- Sets or queries the source threshold level for a pulse width trigger search to determine where to place a mark. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:THReshold?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:THReshold?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:THReshold valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:THReshold <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:THReshold?
Info
<NR3>is the source threshold level for a pulse width trigger search.
when
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:WHEn command.
Description
- This command specifies to search for a pulse with a width (duration) that is less
than, greater than, equal to, or unequal to a specified value (set using
SEARch:A:PULSEWidth:WIDth), OR whoseSEARch:A:PULSEWidth:LOWLimitandSEARch:A:PULSEWidth:HIGHLimit). The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:WHEn?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:WHEn?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:WHEn valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:WHEn {LESSthan|MOREthan|EQual|UNEQual|WIThin|OUTside}
- SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:WHEn?
Info
LESSthancauses a search when a pulse is detected with a width less than the time set by theSEARch:A:PULSEWidth:WIDthcommand.MOREthancauses a search when a pulse is detected with a width greater than the time set by theSEARch:A:PULSEWidth:WIDthcommand.EQualcauses a search when a pulse is detected with a width equal to the time period specified inSEARch:A:PULSEWidth:WIDthwithin a ±5% tolerance.UNEQualcauses a search when a pulse is detected with a width greater than or less than (but not equal) the time period specified inSEARch:A:PULSEWidth:WIDthwithin a ±5% tolerance.WIThincauses a search when a pulse is detected that is within a range set by two values.OUTsidecauses a search when a pulse is detected that is outside of a range set by two values.
SearchSearchItemTriggerAPulsewidthHighlimit
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:HIGHLimit command.
Description
- This command specifies the upper limit to use, in seconds, when searching for a pulse whose duration is inside or outside a range of two values. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:HIGHLimit?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:HIGHLimit?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:HIGHLimit valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:HIGHLimit <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:HIGHLimit?
Info
<NR3>is the upper limit to use, in seconds, when searching for a pulse.
SearchSearchItemTriggerAPulsewidthLogicqualification
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:LOGICQUALification command.
Description
- This command specifies whether or not to use logic qualification for a pulse width search. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:LOGICQUALification?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:LOGICQUALification?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:LOGICQUALification valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:LOGICQUALification {ON|OFF}
- SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:LOGICQUALification?
Info
ONspecifies to use logic qualification.OFFspecifies not to use logic qualification.
SearchSearchItemTriggerAPulsewidthLowlimit
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:LOWLimit command.
Description
- This command specifies the lower limit to use, in seconds, when searching for a pulse whose duration is inside or outside a range of two values. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:LOWLimit?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:LOWLimit?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:LOWLimit valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:LOWLimit <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:LOWLimit?
Info
<NR3>is the lower limit to use, in seconds, when searching for a pulse.
SearchSearchItemTriggerAPulsewidthPolarity
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:POLarity command.
Description
- This command specifies the polarity for a pulse width search. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:POLarity?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:POLarity?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:POLarity valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:POLarity {POSitive|NEGative}
- SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:POLarity?
Info
POSitivespecifies positive polarity for a pulse width search.NEGativespecifies negative polarity for a pulse width search.
SearchSearchItemTriggerAPulsewidthSource
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:SOUrce command.
Description
- This command sets and queries the source for the pulse width search input. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:SOUrce?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:SOUrce?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:SOUrce valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:SOUrce {S<x>_Ch<x>_D|CH<x>|CH<x>_D<x>|REF<x>|REF<x>_D<x>}
- SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:SOUrce?
Info
S<x>_Ch<x>_D<x>specifies is the remote scope number, the analog channel and the digital channel.CH<x>specifies one input channel as the source, where the channel number is specified by x.CH<x>_D<x>specifies a digital reference waveform as the source waveform for the specified search.REF<x>specifies the reference waveform as the search source, where the reference number is specified by x.REF<x>_D<x>specifies a digital reference waveform as the source waveform for the specified search.
SearchSearchItemTriggerAPulsewidthThreshold
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:THReshold command.
Description
- Sets or queries the source threshold level for a pulse width trigger search to determine where to place a mark. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:THReshold?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:THReshold?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:THReshold valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:THReshold <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:THReshold?
Info
<NR3>is the source threshold level for a pulse width trigger search.
SearchSearchItemTriggerAPulsewidthWhen
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:WHEn command.
Description
- This command specifies to search for a pulse with a width (duration) that is less than,
greater than, equal to, or unequal to a specified value (set using
SEARch:A:PULSEWidth:WIDth), OR whoseSEARch:A:PULSEWidth:LOWLimitandSEARch:A:PULSEWidth:HIGHLimit). The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:WHEn?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:WHEn?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:WHEn valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:WHEn {LESSthan|MOREthan|EQual|UNEQual|WIThin|OUTside}
- SEARCH:SEARCH<x>:TRIGger:A:PULSEWidth:WHEn?
Info
LESSthancauses a search when a pulse is detected with a width less than the time set by theSEARch:A:PULSEWidth:WIDthcommand.MOREthancauses a search when a pulse is detected with a width greater than the time set by theSEARch:A:PULSEWidth:WIDthcommand.EQualcauses a search when a pulse is detected with a width equal to the time period specified inSEARch:A:PULSEWidth:WIDthwithin a ±5% tolerance.UNEQualcauses a search when a pulse is detected with a width greater than or less than (but not equal) the time period specified inSEARch:A:PULSEWidth:WIDthwithin a ±5% tolerance.WIThincauses a search when a pulse is detected that is within a range set by two values.OUTsidecauses a search when a pulse is detected that is outside of a range set by two values.
SearchSearchItemTriggerARunt
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:RUNT command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:RUNT?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:RUNT?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.logicqualification: TheSEARCH:SEARCH<x>:TRIGger:A:RUNT:LOGICQUALificationcommand..polarity: TheSEARCH:SEARCH<x>:TRIGger:A:RUNT:POLaritycommand..source: TheSEARCH:SEARCH<x>:TRIGger:A:RUNT:SOUrcecommand..threshold: TheSEARCH:SEARCH<x>:TRIGger:A:RUNT:THResholdcommand tree..when: TheSEARCH:SEARCH<x>:TRIGger:A:RUNT:WHEncommand..width: TheSEARCH:SEARCH<x>:TRIGger:A:RUNT:WIDthcommand.
logicqualification
property
¶
logicqualification: SearchSearchItemTriggerARuntLogicqualification
Return the SEARCH:SEARCH<x>:TRIGger:A:RUNT:LOGICQUALification command.
Description
- This command specifies whether or not to use logic qualification for a runt search. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:RUNT:LOGICQUALification?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:RUNT:LOGICQUALification?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:RUNT:LOGICQUALification valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:RUNT:LOGICQUALification {ON|OFF}
- SEARCH:SEARCH<x>:TRIGger:A:RUNT:LOGICQUALification?
Info
ONspecifies to use logic qualification for a runt search.OFFspecifies not to use logic qualification for a runt search.
polarity
property
¶
polarity: SearchSearchItemTriggerARuntPolarity
Return the SEARCH:SEARCH<x>:TRIGger:A:RUNT:POLarity command.
Description
- This command specifies the polarity for the runt search. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:RUNT:POLarity?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:RUNT:POLarity?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:RUNT:POLarity valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:RUNT:POLarity {POSitive|NEGative|EITher}
- SEARCH:SEARCH<x>:TRIGger:A:RUNT:POLarity?
Info
POSitivespecifies using positive polarity for the runt search.NEGativespecifies using negative polarity for the runt search.EITherspecifies using either positive or negative polarity for the runt search.
source
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:RUNT:SOUrce command.
Description
- This command sets and queries the source for the Runt search input. The search number is specified by x.
Usage
- Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:RUNT:SOUrce valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:RUNT:SOUrce {CH<x>|REF<x>}
Info
CH<x>specifies an analog channel as the search source, where the channel number is specified by x.REF<x>specifies the reference waveform as the search source, where the reference number is specified by x.
threshold
property
¶
threshold: SearchSearchItemTriggerARuntThreshold
Return the SEARCH:SEARCH<x>:TRIGger:A:RUNT:THReshold command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:RUNT:THReshold?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:RUNT:THReshold?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.high: TheSEARCH:SEARCH<x>:TRIGger:A:RUNT:THReshold:HIGHcommand..low: TheSEARCH:SEARCH<x>:TRIGger:A:RUNT:THReshold:LOWcommand.
when
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:RUNT:WHEn command.
Description
- This command sets or queries the condition setting for a runt trigger search to determine where to place a mark. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:RUNT:WHEn?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:RUNT:WHEn?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:RUNT:WHEn valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:RUNT:WHEn {OCCURS|LESSthan|MOREthan|EQual}NOTEQual}
- SEARCH:SEARCH<x>:TRIGger:A:RUNT:WHEn?
Info
LESSthanargument sets the instrument to search if the a runt pulse is detected with width less than the time set by theSEARCH:SEARCH<x>:TRIGger:A:RUNT:WIDthcommand.MOREthanargument sets the instrument to search if the a runt pulse is detected with width more than the time set by theSEARCH:SEARCH<x>:TRIGger:A:RUNT:WIDthcommand.EQualargument sets the instrument to search when the pattern is true for a time period equal to the time period specified inSEARCH:SEARCH<x>:TRIGger:A:RUNT:WIDthwithin a ±5% tolerance.NOTEQualargument sets the instrument to search when the pattern is true for atime period greater than or less than (but not equal) the time period specified inSEARCH:SEARCH<x>:TRIGger:A:RUNT:WIDthwithin a ±5% tolerance.OCCURSargument specifies a search event if a runt of any detectable width occurs.
width
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:RUNT:WIDth command.
Description
- This command sets or queries the width setting for a runt trigger search to determine where to place a mark. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:RUNT:WIDth?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:RUNT:WIDth?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:RUNT:WIDth valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:RUNT:WIDth <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:RUNT:WIDth?
Info
<NR3>specifies the minimum width in seconds.
SearchSearchItemTriggerARuntLogicqualification
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:RUNT:LOGICQUALification command.
Description
- This command specifies whether or not to use logic qualification for a runt search. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:RUNT:LOGICQUALification?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:RUNT:LOGICQUALification?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:RUNT:LOGICQUALification valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:RUNT:LOGICQUALification {ON|OFF}
- SEARCH:SEARCH<x>:TRIGger:A:RUNT:LOGICQUALification?
Info
ONspecifies to use logic qualification for a runt search.OFFspecifies not to use logic qualification for a runt search.
SearchSearchItemTriggerARuntPolarity
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:RUNT:POLarity command.
Description
- This command specifies the polarity for the runt search. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:RUNT:POLarity?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:RUNT:POLarity?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:RUNT:POLarity valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:RUNT:POLarity {POSitive|NEGative|EITher}
- SEARCH:SEARCH<x>:TRIGger:A:RUNT:POLarity?
Info
POSitivespecifies using positive polarity for the runt search.NEGativespecifies using negative polarity for the runt search.EITherspecifies using either positive or negative polarity for the runt search.
SearchSearchItemTriggerARuntSource
¶
Bases: SCPICmdWrite
The SEARCH:SEARCH<x>:TRIGger:A:RUNT:SOUrce command.
Description
- This command sets and queries the source for the Runt search input. The search number is specified by x.
Usage
- Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:RUNT:SOUrce valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:RUNT:SOUrce {CH<x>|REF<x>}
Info
CH<x>specifies an analog channel as the search source, where the channel number is specified by x.REF<x>specifies the reference waveform as the search source, where the reference number is specified by x.
SearchSearchItemTriggerARuntThreshold
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:RUNT:THReshold command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:RUNT:THReshold?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:RUNT:THReshold?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.high: TheSEARCH:SEARCH<x>:TRIGger:A:RUNT:THReshold:HIGHcommand..low: TheSEARCH:SEARCH<x>:TRIGger:A:RUNT:THReshold:LOWcommand.
high
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:RUNT:THReshold:HIGH command.
Description
- This command sets or queries the source threshold HIGH level for a runt trigger search to determine where to place a mark.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:RUNT:THReshold:HIGH?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:RUNT:THReshold:HIGH?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:RUNT:THReshold:HIGH valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:RUNT:THReshold:HIGH <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:RUNT:THReshold:HIGH?
Info
<NR3>is the source threshold HIGH level for a runt trigger search.
low
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:RUNT:THReshold:LOW command.
Description
- Sets or queries the source threshold LOW level for a runt trigger search to determine where to place a mark. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:RUNT:THReshold:LOW?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:RUNT:THReshold:LOW?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:RUNT:THReshold:LOW valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:RUNT:THReshold:LOW <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:RUNT:THReshold:LOW?
Info
<NR3>is the source threshold LOW level for a runt trigger search.
SearchSearchItemTriggerARuntThresholdHigh
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:RUNT:THReshold:HIGH command.
Description
- This command sets or queries the source threshold HIGH level for a runt trigger search to determine where to place a mark.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:RUNT:THReshold:HIGH?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:RUNT:THReshold:HIGH?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:RUNT:THReshold:HIGH valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:RUNT:THReshold:HIGH <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:RUNT:THReshold:HIGH?
Info
<NR3>is the source threshold HIGH level for a runt trigger search.
SearchSearchItemTriggerARuntThresholdLow
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:RUNT:THReshold:LOW command.
Description
- Sets or queries the source threshold LOW level for a runt trigger search to determine where to place a mark. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:RUNT:THReshold:LOW?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:RUNT:THReshold:LOW?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:RUNT:THReshold:LOW valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:RUNT:THReshold:LOW <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:RUNT:THReshold:LOW?
Info
<NR3>is the source threshold LOW level for a runt trigger search.
SearchSearchItemTriggerARuntWhen
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:RUNT:WHEn command.
Description
- This command sets or queries the condition setting for a runt trigger search to determine where to place a mark. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:RUNT:WHEn?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:RUNT:WHEn?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:RUNT:WHEn valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:RUNT:WHEn {OCCURS|LESSthan|MOREthan|EQual}NOTEQual}
- SEARCH:SEARCH<x>:TRIGger:A:RUNT:WHEn?
Info
LESSthanargument sets the instrument to search if the a runt pulse is detected with width less than the time set by theSEARCH:SEARCH<x>:TRIGger:A:RUNT:WIDthcommand.MOREthanargument sets the instrument to search if the a runt pulse is detected with width more than the time set by theSEARCH:SEARCH<x>:TRIGger:A:RUNT:WIDthcommand.EQualargument sets the instrument to search when the pattern is true for a time period equal to the time period specified inSEARCH:SEARCH<x>:TRIGger:A:RUNT:WIDthwithin a ±5% tolerance.NOTEQualargument sets the instrument to search when the pattern is true for atime period greater than or less than (but not equal) the time period specified inSEARCH:SEARCH<x>:TRIGger:A:RUNT:WIDthwithin a ±5% tolerance.OCCURSargument specifies a search event if a runt of any detectable width occurs.
SearchSearchItemTriggerARuntWidth
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:RUNT:WIDth command.
Description
- This command sets or queries the width setting for a runt trigger search to determine where to place a mark. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:RUNT:WIDth?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:RUNT:WIDth?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:RUNT:WIDth valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:RUNT:WIDth <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:RUNT:WIDth?
Info
<NR3>specifies the minimum width in seconds.
SearchSearchItemTriggerASethold
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:SETHold command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:SETHold?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:SETHold?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.clock: TheSEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCkcommand tree..holdtime: TheSEARCH:SEARCH<x>:TRIGger:A:SETHold:HOLDTimecommand..level: TheSEARCH:SEARCH<x>:TRIGger:A:SETHold:LEVelcommand tree..logicpattern: TheSEARCH:SEARCH<x>:TRIGger:A:SETHold:LOGICPatterncommand tree..settime: TheSEARCH:SEARCH<x>:TRIGger:A:SETHold:SETTimecommand.
clock
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.edge: TheSEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:EDGEcommand..source: TheSEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:SOUrcecommand..threshold: TheSEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:THResholdcommand.
holdtime
property
¶
holdtime: SearchSearchItemTriggerASetholdHoldtime
Return the SEARCH:SEARCH<x>:TRIGger:A:SETHold:HOLDTime command.
Description
- This command sets or queries the hold time setting for a setup/hold trigger search to determine where to place a mark. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:SETHold:HOLDTime?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:SETHold:HOLDTime?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:SETHold:HOLDTime valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:SETHold:HOLDTime <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:SETHold:HOLDTime?
Info
<NR3>specifies the hold time setting in seconds. Positive values for hold time occur after the clock edge. Negative values occur before the clock edge.
level
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:SETHold:LEVel command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:SETHold:LEVel?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:SETHold:LEVel?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.ch: TheSEARCH:SEARCH<x>:TRIGger:A:SETHold:LEVel:CH<x>command..math: TheSEARCH:SEARCH<x>:TRIGger:A:SETHold:LEVel:MATH<x>command..ref: TheSEARCH:SEARCH<x>:TRIGger:A:SETHold:LEVel:REF<x>command.
logicpattern
property
¶
logicpattern: SearchSearchItemTriggerASetholdLogicpattern
Return the SEARCH:SEARCH<x>:TRIGger:A:SETHold:LOGICPattern command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:SETHold:LOGICPattern?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:SETHold:LOGICPattern?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.ch: TheSEARCH:SEARCH<x>:TRIGger:A:SETHold:LOGICPattern:CH<x>command..math: TheSEARCH:SEARCH<x>:TRIGger:A:SETHold:LOGICPattern:MATH<x>command..ref: TheSEARCH:SEARCH<x>:TRIGger:A:SETHold:LOGICPattern:REF<x>command.
settime
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:SETHold:SETTime command.
Description
- This command sets or queries the setup time setting for a setup/hold trigger search to determine where to place a mark. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:SETHold:SETTime?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:SETHold:SETTime?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:SETHold:SETTime valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:SETHold:SETTime <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:SETHold:SETTime?
Info
<NR3>specifies the setup time for setup and hold violation triggering.
SearchSearchItemTriggerASetholdClock
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.edge: TheSEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:EDGEcommand..source: TheSEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:SOUrcecommand..threshold: TheSEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:THResholdcommand.
edge
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:EDGE command.
Description
- This command sets or queries the clock slope setting for a setup/hold trigger search to determine where to place a mark. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:EDGE?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:EDGE?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:EDGE valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:EDGE {FALL|RISe}
- SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:EDGE?
Info
FALLspecifies the polarity as the clock falling edge.RISespecifies the polarity as the clock rising edge.
source
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:SOUrce command.
Description
- This command sets or queries the clock source setting for a setup/hold trigger search to determine where to place a mark. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:SOUrce?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:SOUrce?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:SOUrce valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:SOUrce {S<x>_Ch<x>_D<x>|CH<x>|CH<x>_D<x>|MATH<x>|REF<x>|REF<x>_D<x>}
- SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:SOUrce?
Info
S<x>_Ch<x>_D<x>specifies is the remote scope number, the analog channel and the digital channel.CH<x>specifies an input channel as the source, where= 1, 2, 3, 4, 5, 6, 7, or 8, depending on the number of channels in your instrument. CH<x>_D<x>specifies a digital waveform as the setup and hold clock source waveform for the specified search.MATH<x>specifies the math waveform as the search source, where= ≥1. REF<x>specifies the reference waveform as the search source, where= ≥1. REF<x>_D<x>specifies a digital reference waveform as the setup and hold clock source waveform for the specified search.
threshold
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:THReshold command.
Description
- This command sets or queries the clock threshold setting for a setup/hold trigger search to determine where to place a mark. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:THReshold?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:THReshold?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:THReshold valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:THReshold <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:THReshold?
Info
<NR3>the clock threshold setting for a setup/hold trigger search.
SearchSearchItemTriggerASetholdClockEdge
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:EDGE command.
Description
- This command sets or queries the clock slope setting for a setup/hold trigger search to determine where to place a mark. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:EDGE?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:EDGE?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:EDGE valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:EDGE {FALL|RISe}
- SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:EDGE?
Info
FALLspecifies the polarity as the clock falling edge.RISespecifies the polarity as the clock rising edge.
SearchSearchItemTriggerASetholdClockSource
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:SOUrce command.
Description
- This command sets or queries the clock source setting for a setup/hold trigger search to determine where to place a mark. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:SOUrce?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:SOUrce?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:SOUrce valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:SOUrce {S<x>_Ch<x>_D<x>|CH<x>|CH<x>_D<x>|MATH<x>|REF<x>|REF<x>_D<x>}
- SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:SOUrce?
Info
S<x>_Ch<x>_D<x>specifies is the remote scope number, the analog channel and the digital channel.CH<x>specifies an input channel as the source, where= 1, 2, 3, 4, 5, 6, 7, or 8, depending on the number of channels in your instrument. CH<x>_D<x>specifies a digital waveform as the setup and hold clock source waveform for the specified search.MATH<x>specifies the math waveform as the search source, where= ≥1. REF<x>specifies the reference waveform as the search source, where= ≥1. REF<x>_D<x>specifies a digital reference waveform as the setup and hold clock source waveform for the specified search.
SearchSearchItemTriggerASetholdClockThreshold
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:THReshold command.
Description
- This command sets or queries the clock threshold setting for a setup/hold trigger search to determine where to place a mark. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:THReshold?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:THReshold?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:THReshold valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:THReshold <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:THReshold?
Info
<NR3>the clock threshold setting for a setup/hold trigger search.
SearchSearchItemTriggerASetholdHoldtime
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:SETHold:HOLDTime command.
Description
- This command sets or queries the hold time setting for a setup/hold trigger search to determine where to place a mark. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:SETHold:HOLDTime?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:SETHold:HOLDTime?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:SETHold:HOLDTime valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:SETHold:HOLDTime <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:SETHold:HOLDTime?
Info
<NR3>specifies the hold time setting in seconds. Positive values for hold time occur after the clock edge. Negative values occur before the clock edge.
SearchSearchItemTriggerASetholdLevel
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:SETHold:LEVel command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:SETHold:LEVel?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:SETHold:LEVel?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.ch: TheSEARCH:SEARCH<x>:TRIGger:A:SETHold:LEVel:CH<x>command..math: TheSEARCH:SEARCH<x>:TRIGger:A:SETHold:LEVel:MATH<x>command..ref: TheSEARCH:SEARCH<x>:TRIGger:A:SETHold:LEVel:REF<x>command.
ch
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:SETHold:LEVel:CH<x> command.
Description
- This command sets or queries the voltage level to use for setup & hold trigger search. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:SETHold:LEVel:CH<x>?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:SETHold:LEVel:CH<x>?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:SETHold:LEVel:CH<x> valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:SETHold:LEVel:CH<x> <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:SETHold:LEVel:CH<x>?
Info
<NR3>the voltage level to use for setup & hold trigger search.
math
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:SETHold:LEVel:MATH<x> command.
Description
- This command sets or queries the voltage level to use for setup & hold trigger search. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:SETHold:LEVel:MATH<x>?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:SETHold:LEVel:MATH<x>?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:SETHold:LEVel:MATH<x> valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:SETHold:LEVel:MATH<x> <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:SETHold:LEVel:MATH<x>?
Info
<NR3>isi the voltage level to use for setup & hold trigger search.
ref
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:SETHold:LEVel:REF<x> command.
Description
- This command sets or queries the voltage level to use for setup & hold trigger search. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:SETHold:LEVel:REF<x>?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:SETHold:LEVel:REF<x>?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:SETHold:LEVel:REF<x> valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:SETHold:LEVel:REF<x> <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:SETHold:LEVel:REF<x>?
Info
<NR3>is the voltage level to use for setup & hold trigger search.
SearchSearchItemTriggerASetholdLevelChannel
¶
Bases: ValidatedChannel, SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:SETHold:LEVel:CH<x> command.
Description
- This command sets or queries the voltage level to use for setup & hold trigger search. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:SETHold:LEVel:CH<x>?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:SETHold:LEVel:CH<x>?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:SETHold:LEVel:CH<x> valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:SETHold:LEVel:CH<x> <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:SETHold:LEVel:CH<x>?
Info
<NR3>the voltage level to use for setup & hold trigger search.
SearchSearchItemTriggerASetholdLevelMathItem
¶
Bases: ValidatedDynamicNumberCmd, SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:SETHold:LEVel:MATH<x> command.
Description
- This command sets or queries the voltage level to use for setup & hold trigger search. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:SETHold:LEVel:MATH<x>?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:SETHold:LEVel:MATH<x>?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:SETHold:LEVel:MATH<x> valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:SETHold:LEVel:MATH<x> <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:SETHold:LEVel:MATH<x>?
Info
<NR3>isi the voltage level to use for setup & hold trigger search.
SearchSearchItemTriggerASetholdLevelRefItem
¶
Bases: ValidatedDynamicNumberCmd, SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:SETHold:LEVel:REF<x> command.
Description
- This command sets or queries the voltage level to use for setup & hold trigger search. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:SETHold:LEVel:REF<x>?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:SETHold:LEVel:REF<x>?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:SETHold:LEVel:REF<x> valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:SETHold:LEVel:REF<x> <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:SETHold:LEVel:REF<x>?
Info
<NR3>is the voltage level to use for setup & hold trigger search.
SearchSearchItemTriggerASetholdLogicpattern
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:SETHold:LOGICPattern command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:SETHold:LOGICPattern?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:SETHold:LOGICPattern?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.ch: TheSEARCH:SEARCH<x>:TRIGger:A:SETHold:LOGICPattern:CH<x>command..math: TheSEARCH:SEARCH<x>:TRIGger:A:SETHold:LOGICPattern:MATH<x>command..ref: TheSEARCH:SEARCH<x>:TRIGger:A:SETHold:LOGICPattern:REF<x>command.
ch
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:SETHold:LOGICPattern:CH<x> command.
Description
- This command sets or queries the conditions used for generating an A logic pattern, with respect to the defined input pattern, and identifies the time that the selected pattern may be true and still generate the trigger. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:SETHold:LOGICPattern:CH<x>?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:SETHold:LOGICPattern:CH<x>?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:SETHold:LOGICPattern:CH<x> valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:SETHold:LOGICPattern:CH<x> {INCLude|DONTInclude}
- SEARCH:SEARCH<x>:TRIGger:A:SETHold:LOGICPattern:CH<x>?
Info
INCLudespecifies including the specified channel SETHOLD inputs in the specified search.DONTIncludespecifies not including the specified channel SETHOLD inputs in the specified search.
Sub-properties
.d: TheSEARCH:SEARCH<x>:TRIGger:A:SETHold:LOGICPattern:CH<x>_D<x>command.
math
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:SETHold:LOGICPattern:MATH<x> command.
Description
- This command sets or queries the conditions used for generating an A logic pattern, with respect to the defined input pattern, and identifies the time that the selected pattern may be true and still generate the trigger. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:SETHold:LOGICPattern:MATH<x>?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:SETHold:LOGICPattern:MATH<x>?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:SETHold:LOGICPattern:MATH<x> valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:SETHold:LOGICPattern:MATH<x> {INCLude|DONTInclude}
- SEARCH:SEARCH<x>:TRIGger:A:SETHold:LOGICPattern:MATH<x>?
Info
INCLudespecifies including the specified math SETHOLD inputs in the specified search.DONTIncludespecifies not including the specified math SETHOLD inputs in the specified search.
ref
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:SETHold:LOGICPattern:REF<x> command.
Description
- This command sets and returns the conditions used for generating an A logic pattern, with respect to the defined input pattern, and identifies the time that the selected pattern may be true and still generate the trigger. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:SETHold:LOGICPattern:REF<x>?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:SETHold:LOGICPattern:REF<x>?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:SETHold:LOGICPattern:REF<x> valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:SETHold:LOGICPattern:REF<x> {INCLude|DONTInclude}
- SEARCH:SEARCH<x>:TRIGger:A:SETHold:LOGICPattern:REF<x>?
Info
INCLudespecifies including the specified reference SETHOLD inputs in the specified search.DONTIncludespecifies not including the specified reference SETHOLD inputs in the specified search.
SearchSearchItemTriggerASetholdLogicpatternChannel
¶
Bases: ValidatedChannel, SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:SETHold:LOGICPattern:CH<x> command.
Description
- This command sets or queries the conditions used for generating an A logic pattern, with respect to the defined input pattern, and identifies the time that the selected pattern may be true and still generate the trigger. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:SETHold:LOGICPattern:CH<x>?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:SETHold:LOGICPattern:CH<x>?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:SETHold:LOGICPattern:CH<x> valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:SETHold:LOGICPattern:CH<x> {INCLude|DONTInclude}
- SEARCH:SEARCH<x>:TRIGger:A:SETHold:LOGICPattern:CH<x>?
Info
INCLudespecifies including the specified channel SETHOLD inputs in the specified search.DONTIncludespecifies not including the specified channel SETHOLD inputs in the specified search.
Properties
.d: TheSEARCH:SEARCH<x>:TRIGger:A:SETHold:LOGICPattern:CH<x>_D<x>command.
d
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:SETHold:LOGICPattern:CH<x>_D<x> command.
Description
- This command sets or queries the conditions used for generating an A logic pattern, with respect to the defined input pattern, and identifies the time that the selected pattern may be true and still generate the trigger. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:SETHold:LOGICPattern:CH<x>_D<x>?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:SETHold:LOGICPattern:CH<x>_D<x>?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:SETHold:LOGICPattern:CH<x>_D<x> valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:SETHold:LOGICPattern:CH<x>_D<x> {INCLude|DONTInclude}
- SEARCH:SEARCH<x>:TRIGger:A:SETHold:LOGICPattern:CH<x>_D<x>?
Info
INCLudespecifies including the specified digital channel SETHOLD inputs in the specified search.DONTIncludespecifies not including the specified digital channel SETHOLD inputs in the specified search.
SearchSearchItemTriggerASetholdLogicpatternChannelDigitalBit
¶
Bases: ValidatedDigitalBit, SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:SETHold:LOGICPattern:CH<x>_D<x> command.
Description
- This command sets or queries the conditions used for generating an A logic pattern, with respect to the defined input pattern, and identifies the time that the selected pattern may be true and still generate the trigger. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:SETHold:LOGICPattern:CH<x>_D<x>?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:SETHold:LOGICPattern:CH<x>_D<x>?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:SETHold:LOGICPattern:CH<x>_D<x> valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:SETHold:LOGICPattern:CH<x>_D<x> {INCLude|DONTInclude}
- SEARCH:SEARCH<x>:TRIGger:A:SETHold:LOGICPattern:CH<x>_D<x>?
Info
INCLudespecifies including the specified digital channel SETHOLD inputs in the specified search.DONTIncludespecifies not including the specified digital channel SETHOLD inputs in the specified search.
SearchSearchItemTriggerASetholdLogicpatternMathItem
¶
Bases: ValidatedDynamicNumberCmd, SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:SETHold:LOGICPattern:MATH<x> command.
Description
- This command sets or queries the conditions used for generating an A logic pattern, with respect to the defined input pattern, and identifies the time that the selected pattern may be true and still generate the trigger. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:SETHold:LOGICPattern:MATH<x>?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:SETHold:LOGICPattern:MATH<x>?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:SETHold:LOGICPattern:MATH<x> valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:SETHold:LOGICPattern:MATH<x> {INCLude|DONTInclude}
- SEARCH:SEARCH<x>:TRIGger:A:SETHold:LOGICPattern:MATH<x>?
Info
INCLudespecifies including the specified math SETHOLD inputs in the specified search.DONTIncludespecifies not including the specified math SETHOLD inputs in the specified search.
SearchSearchItemTriggerASetholdLogicpatternRefItem
¶
Bases: ValidatedDynamicNumberCmd, SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:SETHold:LOGICPattern:REF<x> command.
Description
- This command sets and returns the conditions used for generating an A logic pattern, with respect to the defined input pattern, and identifies the time that the selected pattern may be true and still generate the trigger. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:SETHold:LOGICPattern:REF<x>?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:SETHold:LOGICPattern:REF<x>?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:SETHold:LOGICPattern:REF<x> valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:SETHold:LOGICPattern:REF<x> {INCLude|DONTInclude}
- SEARCH:SEARCH<x>:TRIGger:A:SETHold:LOGICPattern:REF<x>?
Info
INCLudespecifies including the specified reference SETHOLD inputs in the specified search.DONTIncludespecifies not including the specified reference SETHOLD inputs in the specified search.
SearchSearchItemTriggerASetholdSettime
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:SETHold:SETTime command.
Description
- This command sets or queries the setup time setting for a setup/hold trigger search to determine where to place a mark. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:SETHold:SETTime?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:SETHold:SETTime?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:SETHold:SETTime valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:SETHold:SETTime <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:SETHold:SETTime?
Info
<NR3>specifies the setup time for setup and hold violation triggering.
SearchSearchItemTriggerAState
¶
Bases: SCPICmdWrite
The SEARCH:SEARCH<x>:TRIGger:A:STATE command.
Description
- This command sets or queries the enabled state of the search. The search number is specified by x.
Usage
- Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:STATE valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:STATE {ON|OFF|<NR1>}
Info
<NR1>= 1 enables the search. Any other character disables the search.ONenables the search.OFFdisables the search.
SearchSearchItemTriggerAStopacq
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:STOPAcq command.
Description
- This command sets or queries whether acquisitions are stopped when a search hit is found. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:STOPAcq?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:STOPAcq?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:STOPAcq valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:STOPAcq {ON|OFF|<NR1>}
- SEARCH:SEARCH<x>:TRIGger:A:STOPAcq?
Info
<x>is the number of the search on which to enable or disable the stop acquisition function.<NR1>= 1 enables stopping when a search hit is found. Any other character disables the feature.ONenables stopping when a search hit is found.OFFdisables stopping on a search hit.
SearchSearchItemTriggerATimeout
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:TIMEOut command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:TIMEOut?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:TIMEOut?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.logicqualification: TheSEARCH:SEARCH<x>:TRIGger:A:TIMEOut:LOGICQUALificationcommand..polarity: TheSEARCH:SEARCH<x>:TRIGger:A:TIMEOut:POLaritycommand..source: TheSEARCH:SEARCH<x>:TRIGger:A:TIMEOut:SOUrcecommand..threshold: TheSEARCH:SEARCH<x>:TRIGger:A:TIMEOut:THResholdcommand..time: TheSEARCH:SEARCH<x>:TRIGger:A:TIMEOut:TIMecommand.
logicqualification
property
¶
logicqualification: SearchSearchItemTriggerATimeoutLogicqualification
Return the SEARCH:SEARCH<x>:TRIGger:A:TIMEOut:LOGICQUALification command.
Description
- This command specifies whether or not to use logic qualification for a timeout search. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:TIMEOut:LOGICQUALification?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:TIMEOut:LOGICQUALification?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:TIMEOut:LOGICQUALification valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:TIMEOut:LOGICQUALification {ON|OFF}
- SEARCH:SEARCH<x>:TRIGger:A:TIMEOut:LOGICQUALification?
Info
ONspecifies to use logic qualification.OFFspecifies not to use logic qualification.
polarity
property
¶
polarity: SearchSearchItemTriggerATimeoutPolarity
Return the SEARCH:SEARCH<x>:TRIGger:A:TIMEOut:POLarity command.
Description
- The polarity to be used for a Timeout search. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:TIMEOut:POLarity?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:TIMEOut:POLarity?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:TIMEOut:POLarity valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:TIMEOut:POLarity {STAYSHigh|STAYSLow|EITher}
- SEARCH:SEARCH<x>:TRIGger:A:TIMEOut:POLarity?
Info
STAYSHighspecifies the polarity stays HIGH.STAYSLowspecifies the polarity stays LOW.EITherspecifies the polarity stays HIGH or stays LOW.
source
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:TIMEOut:SOUrce command.
Description
- This command sets and queries the source for timeout search input. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:TIMEOut:SOUrce?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:TIMEOut:SOUrce?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:TIMEOut:SOUrce valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:TIMEOut:SOUrce {S<x>_Ch<x>_D<x>|CH<x>|CH<x>_D<x>|MATH<x>|REF<x>|REF<x>_D<x>}
- SEARCH:SEARCH<x>:TRIGger:A:TIMEOut:SOUrce?
Info
S<x>_Ch<x>_D<x>specifies is the remote scope number, the analog channel and the digital channel.CH<x>specifies one input channel as the source, where the channel number is specified by x.CH<x>_D<x>specifies a digital reference waveform as the source waveform for the specified search.MATH<x>specifies the math waveform as the search source, where the math number is specified by x.REF<x>specifies the reference waveform as the search source, where the reference number is specified by x.REF<x>_D<x>specifies a digital reference waveform as the source waveform for the specified search.
threshold
property
¶
threshold: SearchSearchItemTriggerATimeoutThreshold
Return the SEARCH:SEARCH<x>:TRIGger:A:TIMEOut:THReshold command.
Description
- Sets or queries the source threshold level for a timeout trigger search to determine where to place a mark. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:TIMEOut:THReshold?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:TIMEOut:THReshold?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:TIMEOut:THReshold valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:TIMEOut:THReshold <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:TIMEOut:THReshold?
Info
<NR3>is the source threshold level for a timeout trigger search.
time
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:TIMEOut:TIMe command.
Description
- This command sets or queries the time setting for a timeout trigger search to determine where to place a mark. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:TIMEOut:TIMe?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:TIMEOut:TIMe?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:TIMEOut:TIMe valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:TIMEOut:TIMe <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:TIMEOut:TIMe?
Info
<NR3>is the time in seconds.
SearchSearchItemTriggerATimeoutLogicqualification
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:TIMEOut:LOGICQUALification command.
Description
- This command specifies whether or not to use logic qualification for a timeout search. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:TIMEOut:LOGICQUALification?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:TIMEOut:LOGICQUALification?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:TIMEOut:LOGICQUALification valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:TIMEOut:LOGICQUALification {ON|OFF}
- SEARCH:SEARCH<x>:TRIGger:A:TIMEOut:LOGICQUALification?
Info
ONspecifies to use logic qualification.OFFspecifies not to use logic qualification.
SearchSearchItemTriggerATimeoutPolarity
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:TIMEOut:POLarity command.
Description
- The polarity to be used for a Timeout search. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:TIMEOut:POLarity?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:TIMEOut:POLarity?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:TIMEOut:POLarity valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:TIMEOut:POLarity {STAYSHigh|STAYSLow|EITher}
- SEARCH:SEARCH<x>:TRIGger:A:TIMEOut:POLarity?
Info
STAYSHighspecifies the polarity stays HIGH.STAYSLowspecifies the polarity stays LOW.EITherspecifies the polarity stays HIGH or stays LOW.
SearchSearchItemTriggerATimeoutSource
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:TIMEOut:SOUrce command.
Description
- This command sets and queries the source for timeout search input. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:TIMEOut:SOUrce?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:TIMEOut:SOUrce?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:TIMEOut:SOUrce valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:TIMEOut:SOUrce {S<x>_Ch<x>_D<x>|CH<x>|CH<x>_D<x>|MATH<x>|REF<x>|REF<x>_D<x>}
- SEARCH:SEARCH<x>:TRIGger:A:TIMEOut:SOUrce?
Info
S<x>_Ch<x>_D<x>specifies is the remote scope number, the analog channel and the digital channel.CH<x>specifies one input channel as the source, where the channel number is specified by x.CH<x>_D<x>specifies a digital reference waveform as the source waveform for the specified search.MATH<x>specifies the math waveform as the search source, where the math number is specified by x.REF<x>specifies the reference waveform as the search source, where the reference number is specified by x.REF<x>_D<x>specifies a digital reference waveform as the source waveform for the specified search.
SearchSearchItemTriggerATimeoutThreshold
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:TIMEOut:THReshold command.
Description
- Sets or queries the source threshold level for a timeout trigger search to determine where to place a mark. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:TIMEOut:THReshold?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:TIMEOut:THReshold?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:TIMEOut:THReshold valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:TIMEOut:THReshold <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:TIMEOut:THReshold?
Info
<NR3>is the source threshold level for a timeout trigger search.
SearchSearchItemTriggerATimeoutTime
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:TIMEOut:TIMe command.
Description
- This command sets or queries the time setting for a timeout trigger search to determine where to place a mark. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:TIMEOut:TIMe?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:TIMEOut:TIMe?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:TIMEOut:TIMe valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:TIMEOut:TIMe <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:TIMEOut:TIMe?
Info
<NR3>is the time in seconds.
SearchSearchItemTriggerATransition
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:TRANsition command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:TRANsition?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:TRANsition?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.deltatime: TheSEARCH:SEARCH<x>:TRIGger:A:TRANsition:DELTATimecommand..logicqualification: TheSEARCH:SEARCH<x>:TRIGger:A:TRANsition:LOGICQUALificationcommand..polarity: TheSEARCH:SEARCH<x>:TRIGger:A:TRANsition:POLaritycommand..source: TheSEARCH:SEARCH<x>:TRIGger:A:TRANsition:SOUrcecommand..threshold: TheSEARCH:SEARCH<x>:TRIGger:A:TRANsition:THResholdcommand tree..when: TheSEARCH:SEARCH<x>:TRIGger:A:TRANsition:WHEncommand.
deltatime
property
¶
deltatime: SearchSearchItemTriggerATransitionDeltatime
Return the SEARCH:SEARCH<x>:TRIGger:A:TRANsition:DELTATime command.
Description
- This command sets or queries the transition time setting for a transition trigger
search to determine where to place a mark.
is the search number.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:TRANsition:DELTATime?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:TRANsition:DELTATime?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:TRANsition:DELTATime valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:TRANsition:DELTATime <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:TRANsition:DELTATime?
Info
<NR3>specifies the transition time in seconds.
logicqualification
property
¶
logicqualification: SearchSearchItemTriggerATransitionLogicqualification
Return the SEARCH:SEARCH<x>:TRIGger:A:TRANsition:LOGICQUALification command.
Description
- This command specifies whether or not to use logic qualification for a transition search. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:TRANsition:LOGICQUALification?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:TRANsition:LOGICQUALification?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:TRANsition:LOGICQUALification valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:TRANsition:LOGICQUALification {ON|OFF}
- SEARCH:SEARCH<x>:TRIGger:A:TRANsition:LOGICQUALification?
Info
ONspecifies to use logic qualification for a transition search.OFFspecifies not to use logic qualification for a transition search.
polarity
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:TRANsition:POLarity command.
Description
- This command specifies the polarity for the transition search. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:TRANsition:POLarity?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:TRANsition:POLarity?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:TRANsition:POLarity valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:TRANsition:POLarity {POSitive|NEGative|EITher}
- SEARCH:SEARCH<x>:TRIGger:A:TRANsition:POLarity?
Info
EITherplaces a mark on a transition of either polarity.NEGativeplaces a mark on a transition of negative polarity.POSitiveplaces a mark on a transition of positive polarity.
source
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:TRANsition:SOUrce command.
Description
- This command sets and queries the source for the transition search input. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:TRANsition:SOUrce?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:TRANsition:SOUrce?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:TRANsition:SOUrce valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:TRANsition:SOUrce {S<x>_Ch<x>|CH<x>|MATH<x>|REF<x>}
- SEARCH:SEARCH<x>:TRIGger:A:TRANsition:SOUrce?
Info
S<x>_Ch<x>specifies is the remote scope number, and the analog channel.CH<x>specifies one input channel as the source.MATH<x>specifies the math waveform as the source.REF<x>specifies the reference waveform as the source.
threshold
property
¶
threshold: SearchSearchItemTriggerATransitionThreshold
Return the SEARCH:SEARCH<x>:TRIGger:A:TRANsition:THReshold command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:TRANsition:THReshold?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:TRANsition:THReshold?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.high: TheSEARCH:SEARCH<x>:TRIGger:A:TRANsition:THReshold:HIGHcommand..low: TheSEARCH:SEARCH<x>:TRIGger:A:TRANsition:THReshold:LOWcommand.
when
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:TRANsition:WHEn command.
Description
- This command sets or queries the condition setting for a transition trigger search to determine where to place a mark. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:TRANsition:WHEn?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:TRANsition:WHEn?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:TRANsition:WHEn valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:TRANsition:WHEn {FASTERthan|SLOWERthan|EQual|UNEQual}
- SEARCH:SEARCH<x>:TRIGger:A:TRANsition:WHEn?
Info
FASTERthansets the trigger to occur when the transitioning signal is faster than the set volts/second rate.SLOWERthansets the trigger to occur when the transitioning signal is slower than the set volts/second rate.EQualsets the trigger to occur when the transitioning signal is equal to the set volts/second rate.UNEQualsets the trigger to occur when the transitioning signal is not equal to the set volts/second rate.
SearchSearchItemTriggerATransitionDeltatime
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:TRANsition:DELTATime command.
Description
- This command sets or queries the transition time setting for a transition trigger search
to determine where to place a mark.
is the search number.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:TRANsition:DELTATime?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:TRANsition:DELTATime?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:TRANsition:DELTATime valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:TRANsition:DELTATime <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:TRANsition:DELTATime?
Info
<NR3>specifies the transition time in seconds.
SearchSearchItemTriggerATransitionLogicqualification
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:TRANsition:LOGICQUALification command.
Description
- This command specifies whether or not to use logic qualification for a transition search. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:TRANsition:LOGICQUALification?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:TRANsition:LOGICQUALification?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:TRANsition:LOGICQUALification valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:TRANsition:LOGICQUALification {ON|OFF}
- SEARCH:SEARCH<x>:TRIGger:A:TRANsition:LOGICQUALification?
Info
ONspecifies to use logic qualification for a transition search.OFFspecifies not to use logic qualification for a transition search.
SearchSearchItemTriggerATransitionPolarity
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:TRANsition:POLarity command.
Description
- This command specifies the polarity for the transition search. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:TRANsition:POLarity?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:TRANsition:POLarity?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:TRANsition:POLarity valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:TRANsition:POLarity {POSitive|NEGative|EITher}
- SEARCH:SEARCH<x>:TRIGger:A:TRANsition:POLarity?
Info
EITherplaces a mark on a transition of either polarity.NEGativeplaces a mark on a transition of negative polarity.POSitiveplaces a mark on a transition of positive polarity.
SearchSearchItemTriggerATransitionSource
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:TRANsition:SOUrce command.
Description
- This command sets and queries the source for the transition search input. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:TRANsition:SOUrce?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:TRANsition:SOUrce?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:TRANsition:SOUrce valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:TRANsition:SOUrce {S<x>_Ch<x>|CH<x>|MATH<x>|REF<x>}
- SEARCH:SEARCH<x>:TRIGger:A:TRANsition:SOUrce?
Info
S<x>_Ch<x>specifies is the remote scope number, and the analog channel.CH<x>specifies one input channel as the source.MATH<x>specifies the math waveform as the source.REF<x>specifies the reference waveform as the source.
SearchSearchItemTriggerATransitionThreshold
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:TRANsition:THReshold command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:TRANsition:THReshold?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:TRANsition:THReshold?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.high: TheSEARCH:SEARCH<x>:TRIGger:A:TRANsition:THReshold:HIGHcommand..low: TheSEARCH:SEARCH<x>:TRIGger:A:TRANsition:THReshold:LOWcommand.
high
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:TRANsition:THReshold:HIGH command.
Description
- Sets or queries the source threshold HIGH level for a transition trigger search to determine where to place a mark. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:TRANsition:THReshold:HIGH?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:TRANsition:THReshold:HIGH?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:TRANsition:THReshold:HIGH valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:TRANsition:THReshold:HIGH <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:TRANsition:THReshold:HIGH?
Info
<NR3>the source threshold HIGH level for a transition trigger search.
low
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:TRANsition:THReshold:LOW command.
Description
- Sets or queries the source threshold LOW level for a transition trigger search to determine where to place a mark. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:TRANsition:THReshold:LOW?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:TRANsition:THReshold:LOW?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:TRANsition:THReshold:LOW valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:TRANsition:THReshold:LOW <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:TRANsition:THReshold:LOW?
Info
<NR3>is the source threshold LOW level for a transition trigger searchk.
SearchSearchItemTriggerATransitionThresholdHigh
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:TRANsition:THReshold:HIGH command.
Description
- Sets or queries the source threshold HIGH level for a transition trigger search to determine where to place a mark. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:TRANsition:THReshold:HIGH?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:TRANsition:THReshold:HIGH?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:TRANsition:THReshold:HIGH valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:TRANsition:THReshold:HIGH <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:TRANsition:THReshold:HIGH?
Info
<NR3>the source threshold HIGH level for a transition trigger search.
SearchSearchItemTriggerATransitionThresholdLow
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:TRANsition:THReshold:LOW command.
Description
- Sets or queries the source threshold LOW level for a transition trigger search to determine where to place a mark. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:TRANsition:THReshold:LOW?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:TRANsition:THReshold:LOW?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:TRANsition:THReshold:LOW valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:TRANsition:THReshold:LOW <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:TRANsition:THReshold:LOW?
Info
<NR3>is the source threshold LOW level for a transition trigger searchk.
SearchSearchItemTriggerATransitionWhen
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:TRANsition:WHEn command.
Description
- This command sets or queries the condition setting for a transition trigger search to determine where to place a mark. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:TRANsition:WHEn?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:TRANsition:WHEn?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:TRANsition:WHEn valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:TRANsition:WHEn {FASTERthan|SLOWERthan|EQual|UNEQual}
- SEARCH:SEARCH<x>:TRIGger:A:TRANsition:WHEn?
Info
FASTERthansets the trigger to occur when the transitioning signal is faster than the set volts/second rate.SLOWERthansets the trigger to occur when the transitioning signal is slower than the set volts/second rate.EQualsets the trigger to occur when the transitioning signal is equal to the set volts/second rate.UNEQualsets the trigger to occur when the transitioning signal is not equal to the set volts/second rate.
SearchSearchItemTriggerAType
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:TYPe command.
Description
- This command sets or queries the trigger type setting for a search to determine where to place a mark. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:TYPe?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:TYPe?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:TYPe valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:TYPe {EDGE|RUNT|TRANsition|PULSEWidth|TIMEOut|LOGIc|SETHold|WINdow|Bus|DDRRead|DDRREADWrite|DDRWrite}
- SEARCH:SEARCH<x>:TRIGger:A:TYPe?
Info
EDGEtriggers when the source input signal amplitude crosses the specified level in the direction given by the slope.RUNTtriggers when a pulse crosses the first preset voltage threshold but does not cross the second preset threshold before recrossing the first. The thresholds are set with theSEARCH:SEARCH<x>:TRIGger:A:RUNt:HIGHandSEARCH:SEARCH<x>:TRIGger:A:RUNt:LOW THRESHOLDcommands.TRANsitiontriggers when a pulse crosses both thresholds in the same direction as the specified polarity and the transition time between the two threshold crossings is greater or less than the specified time delta.PULSEWidthtriggers on input signal source pulses that are inside or outside of the given time range specified bySEARCH:SEARCH<x>:TRIGger:A:LOGIc:PATtern:WHEn:LESSLimitandSEARCH:SEARCH<x>:TRIGger:A:LOGIc:PATtern:WHEn:MORELimit. The polarity is selected using theSEARCH:SEARCH<x>:TRIGger:A:RUNT: POLarity command.TIMEOuttriggers on an input signal source that stays above, stays below, or stays either above or beow the trigger level for a given time.LOGIcspecifies that a search occurs when specified conditions are met, and is controlled by theSEARCH:A:LOGIccommands.SETHoldtriggers on a functional pattern combination of one to three data sources at the time of the clock transition.WINdowtriggers on an input signal source that enters or exits the horizontal band defined by the two trigger levels.Busspecifies that a search occurs when a communications signal is found.DDRReadtriggers on a DDR Read event.DDRREADWritetriggers on a DDR Read or Write event.DDRWritetriggers on a DDR Write event.
SearchSearchItemTriggerAWindow
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:WINdow command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:WINdow?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:WINdow?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.crossing: TheSEARCH:SEARCH<x>:TRIGger:A:WINdow:CROSSIngcommand..logicqualification: TheSEARCH:SEARCH<x>:TRIGger:A:WINdow:LOGICQUALificationcommand..polarity: TheSEARCH:SEARCH<x>:TRIGger:A:WINdow:POLaritycommand..source: TheSEARCH:SEARCH<x>:TRIGger:A:WINdow:SOUrcecommand..threshold: TheSEARCH:SEARCH<x>:TRIGger:A:WINdow:THResholdcommand tree..when: TheSEARCH:SEARCH<x>:TRIGger:A:WINdow:WHEncommand..width: TheSEARCH:SEARCH<x>:TRIGger:A:WINdow:WIDthcommand.
crossing
property
¶
crossing: SearchSearchItemTriggerAWindowCrossing
Return the SEARCH:SEARCH<x>:TRIGger:A:WINdow:CROSSIng command.
Description
- This command sets or queries the window trigger threshold crossing of the selected
trigger Source. The threshold crossing selection is only effective when
:TRIGger:A:WINdow:WHEnis INSIDEGreater or OUTSIDEGreater. The search number is specified by x.
Usage
- Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:WINdow:CROSSIng valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:WINdow:CROSSIng {UPPer|LOWer|EITher|NONe}
Info
UPPerif:TRIGger:A:WINdow:WHEnis INSIDEGreater, the instrument triggers when the signal remains between the upper and lower thresholds for longer than the time limit (:TRIGger:A:WINdow:WIDTH) and then exits through the upper threshold. If:TRIGger:A:WINdow:WHEnis OUTSIDEGreater, the instrument triggers when the signal remains above the upper threshold for longer than the time limit (:TRIGger:A:WINdow:WIDTH) and then crosses downward through the upper threshold.LOWerif:TRIGger:A:WINdow:WHEnis INSIDEGreater, the instrument triggers when the signal remains between the upper and lower thresholds for longer than the time limit (:TRIGger:A:WINdow:WIDTH) and then exits through the lower threshold. If:TRIGger:A:WINdow:WHEnis OUTSIDEGreater, the instrument triggers when the signal remains below the lower threshold for longer than the time limit (:TRIGger:A:WINdow:WIDTH) and then crosses upwards through the lower threshold.EITherif:TRIGger:A:WINdow:WHEnis INSIDEGreater, the instrument triggers when the signal remains between the upper and lower thresholds for longer than the time limit (:TRIGger:A:WINdow:WIDTH) and then exits through either the upper or lower threshold. If:TRIGger:A:WINdow:WHEnis OUTSIDEGreater, the instrument triggers when the signal remains either above the upper threshold or below the lower threshold for longer than the time limit (:TRIGger:A:WINdow:WIDTH) and then crosses a threshold.NONeif:TRIGger:A:WINdow:WHEnis INSIDEGreater, the instrument triggers when the signal remains between the upper and lower thresholds for longer than the time limit (:TRIGger:A:WINdow:WIDTH) without crossing through either the upper or lower threshold. If:TRIGger:A:WINdow:WHEnis OUTSIDEGreater, the instrument triggers when the signal remains outside the upper and lower thresholds for longer than the time limit (:TRIGger:A:WINdow:WIDTH) without crossing through either the upper or lower threshold.
logicqualification
property
¶
logicqualification: SearchSearchItemTriggerAWindowLogicqualification
Return the SEARCH:SEARCH<x>:TRIGger:A:WINdow:LOGICQUALification command.
Description
- This command specifies or queries whether or not to use logic qualification for a window search. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:WINdow:LOGICQUALification?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:WINdow:LOGICQUALification?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:WINdow:LOGICQUALification valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:WINdow:LOGICQUALification {ON|OFF}
- SEARCH:SEARCH<x>:TRIGger:A:WINdow:LOGICQUALification?
Info
ONspecifies to use logic qualification for a window search.OFFspecifies not to us logic qualification for a window search.
polarity
property
¶
polarity: SearchSearchItemTriggerAWindowPolarity
Return the SEARCH:SEARCH<x>:TRIGger:A:WINdow:POLarity command.
Description
- This command sets or queries the window trigger threshold crossing of the selected trigger Source. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:WINdow:POLarity?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:WINdow:POLarity?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:WINdow:POLarity valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:WINdow:POLarity {UPPer|LOWer|EITher|NONe}
- SEARCH:SEARCH<x>:TRIGger:A:WINdow:POLarity?
Info
UPPerspecifies that the instrument triggers when the signal remains above the upper threshold for longer than the time limit and then crosses downward through the upper threshold.LOWerspecifies that the instrument triggers when the signal remains below the lower threshold for longer than the time limit and then crosses upwards through the lower threshold.EITherspecifies that the instrument triggers when the signal remains either above the upper threshold or below the lower threshold for longer than the time limit and then crosses a threshold.NONespecifies that the instrument triggers when the signal remains outside the upper and lower thresholds for longer than the time limit without crossing through either the upper or lower threshold.
source
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:WINdow:SOUrce command.
Description
- This command sets and queries the source for the window search input. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:WINdow:SOUrce?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:WINdow:SOUrce?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:WINdow:SOUrce valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:WINdow:SOUrce {S<x>_Ch<x>|CH<x>|MATH<x>|REF<x>}
- SEARCH:SEARCH<x>:TRIGger:A:WINdow:SOUrce?
Info
S<x>_Ch<x>specifies is the remote scope number, and the analog channel.CH<x>specifies one input channel as the source.MATH<x>specifies the math waveform as the source.REF<x>specifies the reference waveform as the source.
threshold
property
¶
threshold: SearchSearchItemTriggerAWindowThreshold
Return the SEARCH:SEARCH<x>:TRIGger:A:WINdow:THReshold command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:WINdow:THReshold?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:WINdow:THReshold?query and raise an AssertionError if the returned value does not matchvalue.
Sub-properties
.high: TheSEARCH:SEARCH<x>:TRIGger:A:WINdow:THReshold:HIGHcommand..low: TheSEARCH:SEARCH<x>:TRIGger:A:WINdow:THReshold:LOWcommand.
when
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:WINdow:WHEn command.
Description
- This command sets or queries the window search event. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:WINdow:WHEn?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:WINdow:WHEn?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:WINdow:WHEn valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:WINdow:WHEn {ENTERSWindow|EXITSWindow|INSIDEGreater|OUTSIDEGreater}
- SEARCH:SEARCH<x>:TRIGger:A:WINdow:WHEn?
Info
ENTERSWindowspecifies a window search when the signal enters the window.EXITSWindowspecifies a window search when the signal exits the window.OUTSIDEGreaterspecifies a search when the signal leaves the window defined by the threshold levels for the time specified by Width.INSIDEGreaterspecifies a search when the signal enters the window defined by the threshold levels for the time specified by Width.
width
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:WINdow:WIDth command.
Description
- This command sets or queries the width setting for a window trigger search to
determine where to place a mark.
is the search number.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:WINdow:WIDth?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:WINdow:WIDth?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:WINdow:WIDth valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:WINdow:WIDth <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:WINdow:WIDth?
Info
<NR3>specifies the minimum width in seconds.
SearchSearchItemTriggerAWindowCrossing
¶
Bases: SCPICmdWrite
The SEARCH:SEARCH<x>:TRIGger:A:WINdow:CROSSIng command.
Description
- This command sets or queries the window trigger threshold crossing of the selected trigger
Source. The threshold crossing selection is only effective when
:TRIGger:A:WINdow:WHEnis INSIDEGreater or OUTSIDEGreater. The search number is specified by x.
Usage
- Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:WINdow:CROSSIng valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:WINdow:CROSSIng {UPPer|LOWer|EITher|NONe}
Info
UPPerif:TRIGger:A:WINdow:WHEnis INSIDEGreater, the instrument triggers when the signal remains between the upper and lower thresholds for longer than the time limit (:TRIGger:A:WINdow:WIDTH) and then exits through the upper threshold. If:TRIGger:A:WINdow:WHEnis OUTSIDEGreater, the instrument triggers when the signal remains above the upper threshold for longer than the time limit (:TRIGger:A:WINdow:WIDTH) and then crosses downward through the upper threshold.LOWerif:TRIGger:A:WINdow:WHEnis INSIDEGreater, the instrument triggers when the signal remains between the upper and lower thresholds for longer than the time limit (:TRIGger:A:WINdow:WIDTH) and then exits through the lower threshold. If:TRIGger:A:WINdow:WHEnis OUTSIDEGreater, the instrument triggers when the signal remains below the lower threshold for longer than the time limit (:TRIGger:A:WINdow:WIDTH) and then crosses upwards through the lower threshold.EITherif:TRIGger:A:WINdow:WHEnis INSIDEGreater, the instrument triggers when the signal remains between the upper and lower thresholds for longer than the time limit (:TRIGger:A:WINdow:WIDTH) and then exits through either the upper or lower threshold. If:TRIGger:A:WINdow:WHEnis OUTSIDEGreater, the instrument triggers when the signal remains either above the upper threshold or below the lower threshold for longer than the time limit (:TRIGger:A:WINdow:WIDTH) and then crosses a threshold.NONeif:TRIGger:A:WINdow:WHEnis INSIDEGreater, the instrument triggers when the signal remains between the upper and lower thresholds for longer than the time limit (:TRIGger:A:WINdow:WIDTH) without crossing through either the upper or lower threshold. If:TRIGger:A:WINdow:WHEnis OUTSIDEGreater, the instrument triggers when the signal remains outside the upper and lower thresholds for longer than the time limit (:TRIGger:A:WINdow:WIDTH) without crossing through either the upper or lower threshold.
SearchSearchItemTriggerAWindowLogicqualification
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:WINdow:LOGICQUALification command.
Description
- This command specifies or queries whether or not to use logic qualification for a window search. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:WINdow:LOGICQUALification?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:WINdow:LOGICQUALification?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:WINdow:LOGICQUALification valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:WINdow:LOGICQUALification {ON|OFF}
- SEARCH:SEARCH<x>:TRIGger:A:WINdow:LOGICQUALification?
Info
ONspecifies to use logic qualification for a window search.OFFspecifies not to us logic qualification for a window search.
SearchSearchItemTriggerAWindowPolarity
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:WINdow:POLarity command.
Description
- This command sets or queries the window trigger threshold crossing of the selected trigger Source. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:WINdow:POLarity?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:WINdow:POLarity?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:WINdow:POLarity valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:WINdow:POLarity {UPPer|LOWer|EITher|NONe}
- SEARCH:SEARCH<x>:TRIGger:A:WINdow:POLarity?
Info
UPPerspecifies that the instrument triggers when the signal remains above the upper threshold for longer than the time limit and then crosses downward through the upper threshold.LOWerspecifies that the instrument triggers when the signal remains below the lower threshold for longer than the time limit and then crosses upwards through the lower threshold.EITherspecifies that the instrument triggers when the signal remains either above the upper threshold or below the lower threshold for longer than the time limit and then crosses a threshold.NONespecifies that the instrument triggers when the signal remains outside the upper and lower thresholds for longer than the time limit without crossing through either the upper or lower threshold.
SearchSearchItemTriggerAWindowSource
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:WINdow:SOUrce command.
Description
- This command sets and queries the source for the window search input. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:WINdow:SOUrce?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:WINdow:SOUrce?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:WINdow:SOUrce valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:WINdow:SOUrce {S<x>_Ch<x>|CH<x>|MATH<x>|REF<x>}
- SEARCH:SEARCH<x>:TRIGger:A:WINdow:SOUrce?
Info
S<x>_Ch<x>specifies is the remote scope number, and the analog channel.CH<x>specifies one input channel as the source.MATH<x>specifies the math waveform as the source.REF<x>specifies the reference waveform as the source.
SearchSearchItemTriggerAWindowThreshold
¶
Bases: SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:WINdow:THReshold command tree.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:WINdow:THReshold?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:WINdow:THReshold?query and raise an AssertionError if the returned value does not matchvalue.
Properties
.high: TheSEARCH:SEARCH<x>:TRIGger:A:WINdow:THReshold:HIGHcommand..low: TheSEARCH:SEARCH<x>:TRIGger:A:WINdow:THReshold:LOWcommand.
high
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:WINdow:THReshold:HIGH command.
Description
- This command sets or queries the source threshold HIGH level for a transition trigger search to determine where to place a mark. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:WINdow:THReshold:HIGH?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:WINdow:THReshold:HIGH?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:WINdow:THReshold:HIGH valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:WINdow:THReshold:HIGH <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:WINdow:THReshold:HIGH?
Info
<NR3>is the source threshold HIGH level for a transition trigger search.
low
property
¶
Return the SEARCH:SEARCH<x>:TRIGger:A:WINdow:THReshold:LOW command.
Description
- This command sets or queries the source threshold LOW level for a transition trigger search to determine where to place a mark. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:WINdow:THReshold:LOW?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:WINdow:THReshold:LOW?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:WINdow:THReshold:LOW valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:WINdow:THReshold:LOW <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:WINdow:THReshold:LOW?
Info
<NR3>the source threshold LOW level for a transition trigger search.
SearchSearchItemTriggerAWindowThresholdHigh
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:WINdow:THReshold:HIGH command.
Description
- This command sets or queries the source threshold HIGH level for a transition trigger search to determine where to place a mark. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:WINdow:THReshold:HIGH?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:WINdow:THReshold:HIGH?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:WINdow:THReshold:HIGH valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:WINdow:THReshold:HIGH <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:WINdow:THReshold:HIGH?
Info
<NR3>is the source threshold HIGH level for a transition trigger search.
SearchSearchItemTriggerAWindowThresholdLow
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:WINdow:THReshold:LOW command.
Description
- This command sets or queries the source threshold LOW level for a transition trigger search to determine where to place a mark. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:WINdow:THReshold:LOW?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:WINdow:THReshold:LOW?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:WINdow:THReshold:LOW valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:WINdow:THReshold:LOW <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:WINdow:THReshold:LOW?
Info
<NR3>the source threshold LOW level for a transition trigger search.
SearchSearchItemTriggerAWindowWhen
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:WINdow:WHEn command.
Description
- This command sets or queries the window search event. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:WINdow:WHEn?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:WINdow:WHEn?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:WINdow:WHEn valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:WINdow:WHEn {ENTERSWindow|EXITSWindow|INSIDEGreater|OUTSIDEGreater}
- SEARCH:SEARCH<x>:TRIGger:A:WINdow:WHEn?
Info
ENTERSWindowspecifies a window search when the signal enters the window.EXITSWindowspecifies a window search when the signal exits the window.OUTSIDEGreaterspecifies a search when the signal leaves the window defined by the threshold levels for the time specified by Width.INSIDEGreaterspecifies a search when the signal enters the window defined by the threshold levels for the time specified by Width.
SearchSearchItemTriggerAWindowWidth
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SEARCH<x>:TRIGger:A:WINdow:WIDth command.
Description
- This command sets or queries the width setting for a window trigger search to determine
where to place a mark.
is the search number.
Usage
- Using the
.query()method will send theSEARCH:SEARCH<x>:TRIGger:A:WINdow:WIDth?query. - Using the
.verify(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:WINdow:WIDth?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SEARCH<x>:TRIGger:A:WINdow:WIDth valuecommand.
SCPI Syntax
- SEARCH:SEARCH<x>:TRIGger:A:WINdow:WIDth <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:WINdow:WIDth?
Info
<NR3>specifies the minimum width in seconds.
SearchSelected
¶
Bases: SCPICmdWrite, SCPICmdRead
The SEARCH:SELected command.
Description
- This command sets or queries the selected search, for example SEARCH1. The search number is specified by x.
Usage
- Using the
.query()method will send theSEARCH:SELected?query. - Using the
.verify(value)method will send theSEARCH:SELected?query and raise an AssertionError if the returned value does not matchvalue. - Using the
.write(value)method will send theSEARCH:SELected valuecommand.
SCPI Syntax
- SEARCH:SELected SEARCH1
- SEARCH:SELected?
Info
SEARCH1is the specified search.