search ¶

The search commands module.

These commands are used in the following models: DPO5K, DPO5KB, DPO70KC, DPO70KD, DPO70KDX, DPO70KSX, DPO7K, DPO7KC, DSA70KC, DSA70KD, MSO5K, MSO5KB, MSO70KC, MSO70KDX

THIS FILE IS AUTO-GENERATED, IT SHOULD NOT BE MANUALLY MODIFIED.

Please report an issue if one is found.

Commands and Queries

- SEARCH:MARKALLevents {ON|OFF|<NR1>}
- SEARCH:MARKALLevents?
- SEARCH:SEARCH<x> <QString>
- SEARCH:SEARCH<x>:COPy {SEARCHtotrigger|TRIGgertosearch|FROMSearch<x>}
- SEARCH:SEARCH<x>:STATE {ON|OFF|<NR1>}
- SEARCH:SEARCH<x>:STATE?
- SEARCH:SEARCH<x>:TOTAL?
- SEARCH:SEARCH<x>:TRIGer:A:BUS:PCIE:SYNCHeader
- SEARCH:SEARCH<x>:TRIGer:A:BUS:PCIE:SYNCHeader?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:CONDition {ERRor|DATA|IDANDDATA|EOF|IDentifier|ACKMISS|SOF|FRAMEtype}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:CONDition?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:FORMat {BINary|HEX}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:FORMat?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:QUALifier {EQUal|LESSEQual|MOREEQua|UNEQual|LESSthan|MOREthan}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:QUALifier?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:SIZe <nr3>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:SIZe?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:VALue <string>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:FRAMEtype {DATa|ERRor|OVERLoad|REMote}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:FRAMEtype?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:IDentifier:DIRection {DONTCare|READ|WRITE}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:IDentifier:DIRection?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:IDentifier:FORMat {BINary|HEX}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:IDentifier:FORMat?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:IDentifier:MODe {EXTENDed|STandard}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:IDentifier:MODe?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:IDentifier:VALue <string>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:IDentifier:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:CONDition {STARTFRAME|MACADDRess|MACTYPE|IPV4Header|TCPHeader|DATa|ENDPACKET|FCSError|QTAG|TCPDATA}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:CONDition?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:DATa:FORMat {BINary|HEX}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:DATa:FORMat?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:DATa:OFFSet <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:DATa:OFFSet?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:DATa:SIZe <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:DATa:SIZe?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:DATa:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:DATa:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:IPHeader:PROTOcol:FORMat {BINary|HEX}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:IPHeader:PROTOcol:FORMat?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:IPHeader:PROTOcol:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:IPHeader:PROTOcol:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:IPHeader:SOUrceaddr:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:IPHeader:SOUrceaddr:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:ADDRess:SOUrce:FORMat {BINary|HEX}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:ADDRess:SOUrce:FORMat?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:ADDRess:SOUrce:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:ADDRess:SOUrce:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:LENgth:FORMat {BINary|HEX}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:LENgth:FORMat?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:LENgth:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:LENgth:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:TYPe:FORMat {BINary|HEX}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:TYPe:FORMat?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:TYPe:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:TYPe:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:QTAG:FORMat {BINary|HEX}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:QTAG:FORMat?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:QTAG:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:QTAG:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:QUALifier {LESSthan|MOREthan|EQual|UNEQual|LESSEQual|MOREEQual}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:QUALifier?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:ACKnum:FORMat {BINary|HEX|DECImal}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:ACKnum:FORMat?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:ACKnum:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:ACKnum:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:SEQnum:FORMat {BINary|HEX|DECImal}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:SEQnum:FORMat?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:SEQnum:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:SEQnum:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:SOUrceport:FORMat {BINary|HEX|DECImal}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:SOUrceport:FORMat?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:SOUrceport:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:SOUrceport:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:CONDition {SOF|FRAMEtype|IDentifier|CYCLEcount|HEADer|DATA|IDANDDATA|EOF|ERRor}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:CONDition?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:CYCLEcount:FORMat {BINary|HEX}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:CYCLEcount:FORMat?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:CYCLEcount:QUALifier {EQUal|LESSEQual|MOREEQual|UNEQual|LESSthan|MOREthan}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:CYCLEcount:QUALifier?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:CYCLEcount:VALue <string>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:CYCLEcount:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:DATa:FORMat {BINary|HEX}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:DATa:FORMat?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:DATa:OFFSet <nr3>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:DATa:OFFSet?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:DATa:QUALifier {EQUal|LESSEQual|MOREEQual|UNEQual|LESSthan|MOREthan}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:DATa:QUALifier?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:DATa:SIZe <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:DATa:SIZe?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:DATa:VALue <STRING>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:DATa:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:EOFTYPE {ALL|STATIC|DYNAMIC}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:EOFTYPE?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:ERRTYPE {CRCHEADer|CRCTRAILer|NULLFRSTATIC|NULLFRDYNAMIC|SYNCFRAME|STARTUPNOSYNC}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:ERRTYPE?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:FRAMEType {NORMal|PAYload|NULL|SYNC|STARTup}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:FRAMEType?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:HEADER:CRC <STRING>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:HEADER:CRC?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:HEADER:CYCLECount <STRING>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:HEADER:CYCLECount?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:HEADER:FRAMEID <STRING>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:HEADER:FRAMEID?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:HEADER:INDBits <STRING>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:HEADER:INDBits?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:HEADER:PAYLENgth <STRING>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:HEADER:PAYLENgth?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:IDentifier:FORMat {BINary|HEX}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:IDentifier:FORMat?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:IDentifier:QUALifier {EQUal|LESSEQual|MOREEQual|UNEQual|LESSthan|MOREthan}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:IDentifier:QUALifier?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:IDentifier:VALue <STRING>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:IDentifier:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:ADDress:FORMat {BINary|HEXadecimal}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:ADDress:FORMat?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:ADDress:MODe {ADDR10|ADDR7}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:ADDress:MODe?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:ADDress:TYPe {CBUS|EEPROm|GENeralcall|HSMODe|NONe|STARtbyte}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:ADDress:TYPe?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:ADDress:VALue <string>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:ADDress:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:CONDition {ADDress|ADDRANDDATA|DATa|ACKMISS|REPEATstart|STARt|STOP}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:CONDition?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:DATa:DIRection {DONTCare|READ|WRITE}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:DATa:DIRection?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:DATa:FORMat {BINary|HEXadecimal}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:DATa:FORMat?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:DATa:SIZe <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:DATa:SIZe?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:DATa:VALue <string>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:DATa:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:CONDition {DATA|IDANDDATA|ERROR|IDentifier|SLEEP|SYNC|WAKEup}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:CONDition?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa:FORMat {BINary|HEX}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa:FORMat?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa:QUALifier {EQUal|LESSEQual|MOREEQual|UNEQual|LESSthan|MOREthan}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa:QUALifier?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa:SIZe <nr3>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa:SIZe?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa:VALue <string>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:ERRTYPE {CHecksum|PARity|SYNC}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:ERRTYPE?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:IDentifier:FORMat {BINary|HEX}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:IDentifier:FORMat?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:IDentifier:VALue <string>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:IDentifier:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:ADDRess:FORMat {BINary|HEX}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:ADDRess:FORMat?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:ADDRess:QUALifier {LESSthan|MOREthan|EQual|UNEQual|LESSEQual|MOREEQual}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:ADDRess:QUALifier?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:ADDRess:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:ADDRess:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:COUNt <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:COUNt:FORMat {BINary|HEX}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:COUNt:FORMat?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:COUNt?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:PARity {0|1|X|ZERo|ONE|NOCARE|OFF|ON}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:PARity?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:SUBADdress <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:SUBADdress:FORMat {BINary|HEX}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:SUBADdress:FORMat?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:SUBADdress?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:TRBit {RX|TX|X|DONTCare}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:TRBit?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:CONDition {SYNC|COMMAND|STATus|DATA|TIMe|ERRor}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:CONDition?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:DATA:FORMat {BINary|HEX}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:DATA:FORMat?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:DATA:PARity {0|1|X|ZERo|ONE|NOCARE|OFF|ON}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:DATA:PARity?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:DATA:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:DATA:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:ERRTYPE {PARity|SYNC|MANCHester|DATA}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:ERRTYPE?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATUS:ADDRess:FORMat {BINary|HEX}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATUS:ADDRess:FORMat?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATUS:ADDRess:QUALifier {LESSthan|MOREthan|EQual|UNEQual|LESSEQual|MOREEQual}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATUS:ADDRess:QUALifier?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATUS:ADDRess:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATUS:ADDRess:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATUS:BIT:BCR {0|1|X|ZERo|ONE|NOCARE|OFF|ON}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATUS:BIT:BCR?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATUS:BIT:BUSY {0|1|X|ZERo|ONE|NOCARE|OFF|ON}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATUS:BIT:BUSY?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATUS:BIT:DBCA {0|1|X|ZERo|ONE|NOCARE|OFF|ON}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATUS:BIT:DBCA?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATUS:BIT:INSTR {0|1|X|ZERo|ONE|NOCARE|OFF|ON}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATUS:BIT:INSTR?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATUS:BIT:ME {0|1|X|ZERo|ONE|NOCARE|OFF|ON}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATUS:BIT:ME?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATUS:BIT:PARity {0|1|X|ZERo|ONE|NOCARE|DONTCare|ON|OFF}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATUS:BIT:PARity?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATUS:BIT:SRQ {0|1|X|ZERo|ONE|NOCARE|OFF|ON}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATUS:BIT:SRQ?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATUS:BIT:SUBSF {0|1|X|ZERo|ONE|NOCARE|OFF|ON}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATUS:BIT:SUBSF?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATUS:BIT:TF {0|1|X|ZERo|ONE|NOCARE|OFF|ON}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATUS:BIT:TF?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:TIME:LESSLimit <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:TIME:LESSLimit?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:TIME:MORELimit <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:TIME:MORELimit?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:TIME:QUALifier {LESSthan|MOREthan|INrange|OUTrange}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:TIME:QUALifier?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:CONDition {ESCMode|EOT|ERROR|LONG|SHORT|SOT|STOP|WARNing}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:CONDition?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:DTLong {ANY|BLANK|EMBEDded|NULL|RAW10|RAW12|RAW14|RAW<x>|RGB444|RGB555|RGB565|RGB666|RGB888|USER8B1|USER8B2|USER8B3|USER8B4|USER8B5|USER8B6|USER8B7|USER8B8|YUV420B10|YUV420C10|YUV420B8|YUV420C8|YUV420L8|YUV422B10|YUV422B8}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:DTLong?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:DTShort {ANY|FRAMEEnd|FRAMEStart|GSP1|GSP2|GSP3|GSP4|GSP5|GSP6|GSP7|GSP8|LINEEnd|LINEStart}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:DTShort?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:ERRor {ANY|CHECKsumerror|ECCError}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:ERRor?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:ESCape {ANY|LPDATA|RESET|ULTRALP}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:ESCape?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:OFFset:VALue {<NR3>|DONTCare}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:OFFset:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:PACKetdata:FORMat {BINary|HEXadecimal}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:PACKetdata:FORMat?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:PACKetdata:VALue <string>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:PACKetdata:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:PAYLoad:FORMat {BINary|HEXadecimal}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:PAYLoad:FORMat?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:PAYLoad:SIZe <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:PAYLoad:SIZe?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:PAYLoad:VALue <string>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:PAYLoad:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:PIXel:VALue {<NR3>|DONTCare}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:PIXel:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:RAW:QUAlifier {EQUal|LESSThan|MOREThan}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:RAW:QUAlifier?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:RAW:VALue {<NR3>|DONTCare}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:RAW:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:RGB:BLUe:QUAlifier {EQUal|LESSThan|MOREThan}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:RGB:BLUe:QUAlifier?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:RGB:BLUe:VALue {<NR3>|DONTCare}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:RGB:BLUe:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:RGB:GREen:QUAlifier {EQUal|LESSThan|MOREThan}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:RGB:GREen:QUAlifier?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:RGB:GREen:VALue {<NR3>|DONTCare}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:RGB:GREen:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:RGB:RED:QUAlifier {EQUal|LESSThan|MOREThan}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:RGB:RED:QUAlifier?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:RGB:RED:VALue {<NR3>|DONTCare}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:RGB:RED:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:VC {<NR3>|DONTCare}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:VC?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:WARNing {ANY|ECCWarn}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:WARNing?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:WC:VALue {<NR3>|DONTCare}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:WC:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:YUV:U:QUAlifier {EQUal|LESSThan|MOREThan}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:YUV:U:QUAlifier?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:YUV:U:VALue {<NR3>|DONTCare}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:YUV:U:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:YUV:V:QUAlifier {EQUal|LESSThan|MOREThan}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:YUV:V:QUAlifier?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:YUV:V:VALue {<NR3>|DONTCare}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:YUV:V:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:YUV:Y:QUAlifier {EQUal|LESSThan|MOREThan}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:YUV:Y:QUAlifier?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:YUV:Y:VALue {<NR3>|DONTCare}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:YUV:Y:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:ACKERRreport {ANY|CHKSUMError|CONTention|DSINR|DSIViolation|DSIVC|ECCMBError|ECCSBError|EOTSync|ESCMODEError|FCE|HSRTError|INVALID|LPTSError|SOTError|SOTSync}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:ACKERRreport?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:CONDition {ESCMode|BTA|EOT|ERROR|LONG|SHORT|SOT|STOP|WA}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:CONDition?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:DIRection {FORWard|REVErse|ANY}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:DIRection?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:DTLong {ANY|BLANK|DCSLONGRead|DCSLONGWrite|GLONGRead|GLONGWrite|LPS666|NULL|PPS565|PPS666|PPS888|PPS101010|PPS121212|YCBCR12|YCBCR16|YCBCR20|YCBCR24}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:DTLong?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:DTShort {ACKErrorreport|ANY|COLOROFF|COLORON|DCSR|DCSSRR1|DCSRR2|DCSSW<x>|EOT|GR<x>|GSRR<x>|GSW<x>|HSYNCEnd|HSYNCStart|MAXRETsize|SHUTDown|TURNON|VSYNCEnd|VSYNCStart}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:DTShort?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:ERRor {ANY|CHECKsumerror|ECCError}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:ERRor?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:ESCape {ACK|LPDATA|RESET|ANY|TEAR|ULTRALP}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:ESCape?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:OFFset:VALue {<NR3>|DONTCare}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:OFFset:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:PACKetdata:FORMat {BINary|HEXadecimal}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:PACKetdata:FORMat?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:PACKetdata:VALUEOne <string>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:PACKetdata:VALUEOne?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:PACKetdata:VALUETwo <string>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:PACKetdata:VALUETwo?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:PAYLoad:FORMat {BINary|HEXadecimal}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:PAYLoad:FORMat?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:PAYLoad:SIZe <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:PAYLoad:SIZe?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:PAYLoad:VALue <string>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:PAYLoad:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:PIXel:VALue {<NR3>|DONTCare}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:PIXel:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:RGB:BLUe:QUAlifier {EQUal|LESSThan|MOREThan}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:RGB:BLUe:QUAlifier?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:RGB:BLUe:VALue {<NR3>|DONTCare}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:RGB:BLUe:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:RGB:GREen:QUAlifier {EQUal|LESSThan|MOREThan}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:RGB:GREen:QUAlifier?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:RGB:GREen:VALue {<NR3>|DONTCare}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:RGB:GREen:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:RGB:RED:QUAlifier {EQUal|LESSThan|MOREThan}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:RGB:RED:QUAlifier?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:RGB:RED:VALue {<NR3>|DONTCare}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:RGB:RED:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:VC {<NR3>|DONTCare}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:VC?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:WARNing {ANY|ECCWarn}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:WARNing?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:WC:VALue {<NR3>|DONTCare}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:WC:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:YCBCR:CB:QUAlifier {EQUal|LESSThan|MOREThan}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:YCBCR:CB:QUAlifier?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:YCBCR:CB:VALue {<nr3>|DONTCare}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:YCBCR:CB:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:YCBCR:CR:QUAlifier {EQUal|LESSThan|MOREThan}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:YCBCR:CR:QUAlifier?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:YCBCR:CR:VALue {<nr3>|DONTCare}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:YCBCR:CR:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:YCBCR:Y:QUAlifier {EQUal|LESSThan|MOREThan}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:YCBCR:Y:QUAlifier?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:YCBCR:Y:VALue {<nr3>|DONTCare}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:YCBCR:Y:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PARallel:DATa:FORMat {BINary|HEXadecimal|SYMBolic}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PARallel:DATa:FORMat?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PARallel:DATa:VALue <string>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PARallel:DATa:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:CHARacter:CHAR <STRING>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:CHARacter:CHAR?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:CHARacter:SYMbol:MINus <string>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:CHARacter:SYMbol:MINus?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:CHARacter:SYMbol:PLUS <string>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:CHARacter:SYMbol:PLUS?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:CONDition {ANYControl|CHARacter|ERROR|PATtern|LONGORDERedset|SYNCHeader}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:CONDition?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:DISParity {EITher|NEGAtive|POSITIVe}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:DISParity?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:ERROR:CHAR {ON|OFF|<NR1>}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:ERROR:CHAR?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:ERROR:DISParity {ON|OFF|<NR1>}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:ERROR:DISParity?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:ERROR:ORDERedset {ON|OFF|<NR1>}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:ERROR:ORDERedset?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:ERROR:SYNC {ON|OFF|<NR1>}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:ERROR:SYNC?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:FORMat {ORDERedset|SYMbol|CHAR}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:FORMat?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:LONGORDERedset {CTRLSKP|EI|EIE|FTS|SDS|SKP|TS<x>}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:LONGORDERedset?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:PATtern:CHAR<x> <string>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:PATtern:CHAR<x>?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:PATtern:ORDERedset {COMPAT|EI|FTS|SKP|INVALID}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:PATtern:ORDERedset?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:PATtern:SYMbol:MINus<x> <string>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:PATtern:SYMbol:MINus<x>?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:PATtern:SYMbol:PLUS<x> <string>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:PATtern:SYMbol:PLUS<x>?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:RS232C:CONDition {DATa|EOp|PARItyerror|STARt}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:RS232C:CONDition?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:RS232C:DATa:FORMat {BINary|HEXadecimal}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:RS232C:DATa:FORMat?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:RS232C:DATa:SIZe <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:RS232C:DATa:SIZe?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:RS232C:DATa:VALue <string>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:RS232C:DATa:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:S64B66B:BLOCKONE { SYNC|INVSYNC|BLOCKtype|PATtern }
- SEARCH:SEARCH<x>:TRIGger:A:BUS:S64B66B:BLOCKONE:BLOCKType { NONe|X1E|X2D|X33|X66|X55|X78|X4B|X87|X99|XB4|XCC|XD2|XE1|XFF }
- SEARCH:SEARCH<x>:TRIGger:A:BUS:S64B66B:BLOCKONE:BLOCKType?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:S64B66B:BLOCKONE:PATtern:FORMat { Binary|HEX }
- SEARCH:SEARCH<x>:TRIGger:A:BUS:S64B66B:BLOCKONE:PATtern:FORMat?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:S64B66B:BLOCKONE:PATtern:SYNC <string>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:S64B66B:BLOCKONE:PATtern:SYNC?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:S64B66B:BLOCKONE:PATtern:VALue <string>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:S64B66B:BLOCKONE:PATtern:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:S64B66B:BLOCKONE?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:S64B66B:BLOCKONETHENTWO:FORMat { Binary|HEX }
- SEARCH:SEARCH<x>:TRIGger:A:BUS:S64B66B:BLOCKONETHENTWO:FORMat?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:S64B66B:CONDition { BLOCK|BLOCK1THEN2 }
- SEARCH:SEARCH<x>:TRIGger:A:BUS:S64B66B:CONDition?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:CHARacter:CHAR <string>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:CHARacter:CHAR?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:CHARacter:SYMbol:MINus <string>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:CHARacter:SYMbol:MINus?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:CHARacter:SYMbol:PLUS <string>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:CHARacter:SYMbol:PLUS?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:CONDition {ANYControl|CHARacter|ERROR| PATtern}?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:CONDition?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:DISParity {NEGAtive|POSITIVe|EITher}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:DISParity?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:ERROR:CHAR {ON|OFF|<NR1>}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:ERROR:CHAR?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:ERROR:DISParity {ON|OFF|<NR1>}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:ERROR:DISParity?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:FORMat {CHAR|SYMbol}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:FORMat?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:PATtern:CHAR<x> <string>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:PATtern:CHAR<x>?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:PATtern:SYMbol:MINus<x> <string>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:PATtern:SYMbol:MINus<x>?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:PATtern:SYMbol:PLUS<x> <string>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:PATtern:SYMbol:PLUS<x>?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SOUrce {B0|B1|B2|B3|B4|B5|B6|B7|B8|B9|B10|B11|B12|B13|B14|B15|B16}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SOUrce?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:CONDition {DATA|SS}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:CONDition?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:DATa:FORMat {BINary|HEXadecimal}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:DATa:FORMat?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:DATa:SIZe <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:DATa:SIZe?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:DATa:VALue <string>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:DATa:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ADDress:FORMat {BINary|HEX|SYMBolic}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ADDress:FORMat?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ADDress:HIVALue <string>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ADDress:HIVALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ADDress:VALue <string>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ADDress:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:CHARacter:CHAR <string>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:CHARacter:CHAR?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:CHARacter:SYMbol:MINus <string>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:CHARacter:SYMbol:MINus?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:CHARacter:SYMbol:PLUS <string>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:CHARacter:SYMbol:PLUS?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:CONDition {DATAPacket|EOP|ERROR|HANDSHAKEPacket|RESET|RESUME|SPECIALPacket|SUSPEND|SYNC|TOKENPacket}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:CONDition?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:FORMat {BINary|HEX|SYMBolic}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:FORMat?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:HIVALue <string>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:HIVALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:OFFSet {<NR3>|DONTCare}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:OFFSet?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:SIZe <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:SIZe?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:TYPe {ANY|DATA<x>|MDATA}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:TYPe?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:VALue <string>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DISParity {NEGAtive|POSITIVe|EITher}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DISParity?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ENDPoint:FORMat {BINary|HEXadecimal|SYMBolic}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ENDPoint:FORMat?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ENDPoint:HIVALue <string>}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ENDPoint:HIVALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ENDPoint:VALue <string>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ENDPoint:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ERROR:CHAR {ON|OFF|<NR1>}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ERROR:CHAR?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ERROR:DISParity {ON|OFF|<NR1>}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ERROR:DISParity?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ERROR:ORDERedset {|OFF|ON}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ERROR:ORDERedset?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ERRTYPE {BITSTUFFing|CRC5|CRC16|PID}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ERRTYPE?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:FORMat {CHAR|SYMbol}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:FORMat?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:HANDSHAKEType {ACK|ANY|NAK|NYET|STALL}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:HANDSHAKEType?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:LONGORDERedset {EIE|TS<x>}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:LONGORDERedset?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:PACKets {LMP|TP|DP|ITP}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:PACKets:LMPPACKets {ANY|LMPLink|LMPUtwo|LMPDevice|LMPConfig|LMPResponse}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:PACKets:LMPPACKets?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:PACKets:TPPACKets {ANY|TPACK|TPNRDY|TPERDY|TPStatus|TPSTall|TPNotify|TPPing|TPResponse}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:PACKets:TPPACKets?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:PACKets?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:PATtern:CHAR<x> <string>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:PATtern:CHAR<x>?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:PATtern:NUMSymbols <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:PATtern:NUMSymbols?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:PATtern:ORDERedset {ON|OFF|1|0}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:PATtern:ORDERedset?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:PATtern:SYMbol:MINus<x> <string>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:PATtern:SYMbol:MINus<x>?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:PATtern:SYMbol:PLUS<x> <string>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:PATtern:SYMbol:PLUS<x>?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:QUAlifier {EQUal|INrange|LESSEQual|MOREEQual|OUTrange|UNEQual|LESSThan|MOREThan}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:QUAlifier?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SOF:FORMat {BINary|HEXadecimal|SYMBolic}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SOF:FORMat?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SOF:FRAMENUMber <string>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SOF:FRAMENUMber?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPECIALType {ANY|ERR|PING|PRE|RESERVED|SPLIT}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPECIALType?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:ET:VALue {BULK|CONTROL|DONTCare|INTERRUPT|ISOchronous}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:ET:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:HUB:FORMat {BINary|HEXadecimal}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:HUB:FORMat?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:HUB:VALue <string>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:HUB:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:PORT:FORMat {BINary|HEXadecimal}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:PORT:FORMat?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:PORT:VALue <string>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:PORT:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:SC:VALue {CSPLIT|DONTCare|SSPLIT}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:SC:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:SE:VALue {DONTCare|FULLSPeed|ISOALL|ISOEND|ISOMID|ISOSTART|LOWSPeed}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:SE:VALue?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:TOKENType {ANY|IN|OUT|SETUP|SOF}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:TOKENType?
- SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:AUTOBitrate {AUTO|CUSTom|DDR200|DDR266|DDR333|DDR370|DDR400|DDR533|DDR667|DDR800|DDR1066|DDR1200|DDR1333|DDR1466|DDR1600|DDR1866|DDR2133|DDR2400|DDR2666|DDR3200|DDR4000|DDR4800|DDR5000|DDR5500}
- SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:AUTOBitrate?
- SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:AUTOReflevel {AUTO|CUSTom}
- SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:AUTOReflevel?
- SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:BITRate <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:BITRate?
- SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:CSActive {HIGH|LOW}
- SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:CSActive?
- SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:CSLevel <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:CSLevel?
- SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:CSMode {AUTO|MANual}
- SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:CSMode?
- SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:CSSource {CH<x>|MATH<x>|REF<x>|NONe}
- SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:CSSource?
- SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:DATASource {CH<x>|MATH<x>|REF<x>}
- SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:DATASource?
- SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:HYSteresis <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:HYSteresis?
- SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:MARgin <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:MARgin?
- SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:MAXCas <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:MAXCas?
- SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:MINCas <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:MINCas?
- SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:REFLevel:DATa:HIGH <NRF>
- SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:REFLevel:DATa:HIGH?
- SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:REFLevel:DATa:LOW <NRF>
- SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:REFLevel:DATa:LOW?
- SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:REFLevel:DATa:MID <NRF>
- SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:REFLevel:DATa:MID?
- SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:REFLevel:STROBE:HIGH <NRF>
- SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:REFLevel:STROBE:HIGH?
- SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:REFLevel:STROBE:LOW <NRF>
- SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:REFLevel:STROBE:LOW?
- SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:REFLevel:STROBE:MID <NRF>
- SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:REFLevel:STROBE:MID?
- SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:STANdard {DDR|DDR2|DDR3|GDDR3|LPDDR|DDR3L|DDR4|LPDDR3}
- SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:STANdard?
- SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:STROBEsource {CH<x>|MATH<x>|REF<x>}
- SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:STROBEsource?
- SEARCH:SEARCH<x>:TRIGger:A:EDGE:SLOpe:CH<x> {RISe|FALL|EITher}
- SEARCH:SEARCH<x>:TRIGger:A:EDGE:SLOpe:CH<x>?
- SEARCH:SEARCH<x>:TRIGger:A:EDGE:SLOpe:MATH<x> {RISe|FALL|EITher}
- SEARCH:SEARCH<x>:TRIGger:A:EDGE:SLOpe:MATH<x>?
- SEARCH:SEARCH<x>:TRIGger:A:EDGE:SLOpe:REF<x> {RISe|FALL|EITher}
- SEARCH:SEARCH<x>:TRIGger:A:EDGE:SLOpe:REF<x>?
- SEARCH:SEARCH<x>:TRIGger:A:EDGE:SOUrce {CH<x>|MATH<x>|REF<x>}
- SEARCH:SEARCH<x>:TRIGger:A:EDGE:SOUrce?
- SEARCH:SEARCH<x>:TRIGger:A:GLItch:POLarity:CH<x> {EITher|NEGAtive|POSITIVe}
- SEARCH:SEARCH<x>:TRIGger:A:GLItch:POLarity:CH<x>?
- SEARCH:SEARCH<x>:TRIGger:A:GLItch:POLarity:MATH<x> {EITher|NEGAtive|POSITIVe}
- SEARCH:SEARCH<x>:TRIGger:A:GLItch:POLarity:MATH<x>?
- SEARCH:SEARCH<x>:TRIGger:A:GLItch:POLarity:REF<x> {EITher|NEGAtive|POSITIVe}
- SEARCH:SEARCH<x>:TRIGger:A:GLItch:POLarity:REF<x>?
- SEARCH:SEARCH<x>:TRIGger:A:GLItch:TRIGIF {ACCept|REJect}
- SEARCH:SEARCH<x>:TRIGger:A:GLItch:TRIGIF?
- SEARCH:SEARCH<x>:TRIGger:A:GLItch:WIDth <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:GLItch:WIDth?
- SEARCH:SEARCH<x>:TRIGger:A:LEVel:CH<x> {<NR3>|ECL|TTL}
- SEARCH:SEARCH<x>:TRIGger:A:LEVel:CH<x>?
- SEARCH:SEARCH<x>:TRIGger:A:LEVel:MATH<x> {<NR3>|ECL|TTL}
- SEARCH:SEARCH<x>:TRIGger:A:LEVel:MATH<x>?
- SEARCH:SEARCH<x>:TRIGger:A:LEVel:REF<x> {<NR3>|ECL|TTL}
- SEARCH:SEARCH<x>:TRIGger:A:LEVel:REF<x>?
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:FUNCtion {AND|NANd|NOR|OR}
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:FUNCtion?
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:INPut:CH<x> {HIGH|LOW|X}
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:INPut:CH<x>?
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:INPut:MATH<x> {HIGH|LOW|X}
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:INPut:MATH<x>?
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:INPut:REF<x> {HIGH|LOW|X}
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:INPut:REF<x>?
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:THReshold:CH<x> <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:THReshold:CH<x>?
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:THReshold:MATH<x> <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:THReshold:MATH<x>?
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:THReshold:REF<x> <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:THReshold:REF<x>?
- SEARCH:SEARCH<x>:TRIGger:A:PATtern:WHEn {TRUe|FALSe|LESSThan|MOREThan}
- SEARCH:SEARCH<x>:TRIGger:A:PATtern:WHEn:LESSLimit <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:PATtern:WHEn:LESSLimit?
- SEARCH:SEARCH<x>:TRIGger:A:PATtern:WHEn:MORELimit <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:PATtern:WHEn:MORELimit?
- SEARCH:SEARCH<x>:TRIGger:A:PATtern:WHEn?
- SEARCH:SEARCH<x>:TRIGger:A:PULse:SOUrce {CH<x>|MATH<x>|REF<x>}
- SEARCH:SEARCH<x>:TRIGger:A:PULse:SOUrce?
- SEARCH:SEARCH<x>:TRIGger:A:RUNT:POLarity:CH<x> {EITher|NEGAtive|POSITIVe}
- SEARCH:SEARCH<x>:TRIGger:A:RUNT:POLarity:CH<x>?
- SEARCH:SEARCH<x>:TRIGger:A:RUNT:POLarity:MATH<x> {EITher|NEGAtive|POSITIVe}
- SEARCH:SEARCH<x>:TRIGger:A:RUNT:POLarity:MATH<x>?
- SEARCH:SEARCH<x>:TRIGger:A:RUNT:POLarity:REF<x> {EITher|NEGAtive|POSITIVe}
- SEARCH:SEARCH<x>:TRIGger:A:RUNT:POLarity:REF<x>?
- SEARCH:SEARCH<x>:TRIGger:A:RUNT:THReshold:HIGH:CH<x> <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:RUNT:THReshold:HIGH:CH<x>?
- SEARCH:SEARCH<x>:TRIGger:A:RUNT:THReshold:HIGH:MATH<x> <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:RUNT:THReshold:HIGH:MATH<x>?
- SEARCH:SEARCH<x>:TRIGger:A:RUNT:THReshold:HIGH:REF<x> <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:RUNT:THReshold:HIGH:REF<x>?
- SEARCH:SEARCH<x>:TRIGger:A:RUNT:THReshold:LOW:CH<x> <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:RUNT:THReshold:LOW:CH<x>?
- SEARCH:SEARCH<x>:TRIGger:A:RUNT:THReshold:LOW:MATH<x> <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:RUNT:THReshold:LOW:MATH<x>?
- SEARCH:SEARCH<x>:TRIGger:A:RUNT:THReshold:LOW:REF<x> <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:RUNT:THReshold:LOW:REF<x>?
- SEARCH:SEARCH<x>:TRIGger:A:RUNT:WHEn {OCCurs|WIDERthan}
- SEARCH:SEARCH<x>:TRIGger:A:RUNT:WHEn?
- SEARCH:SEARCH<x>:TRIGger:A:RUNT:WIDth <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:RUNT:WIDth?
- SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:EDGE {FALL|RISe}
- SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:EDGE?
- SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:SOUrce {CH<x>|MATH<x>|REF<x>}
- SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:SOUrce?
- SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:THReshold:CH<x> {NR3|ECL|TTL}
- SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:THReshold:CH<x>?
- SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:THReshold:MATH<x> {NR3|ECL|TTL}
- SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:THReshold:MATH<x>?
- SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:THReshold:REF<x> {NR3|ECL|TTL}
- SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:THReshold:REF<x>?
- SEARCH:SEARCH<x>:TRIGger:A:SETHold:DATa:SOUrce {CH<x>|MATH<x>|REF<x>}
- SEARCH:SEARCH<x>:TRIGger:A:SETHold:DATa:SOUrce?
- SEARCH:SEARCH<x>:TRIGger:A:SETHold:DATa:THReshold:CH<x> {NR3|ECL|TTL}
- SEARCH:SEARCH<x>:TRIGger:A:SETHold:DATa:THReshold:CH<x>?
- SEARCH:SEARCH<x>:TRIGger:A:SETHold:DATa:THReshold:MATH<x> {NR3|ECL|TTL}
- SEARCH:SEARCH<x>:TRIGger:A:SETHold:DATa:THReshold:MATH<x>?
- SEARCH:SEARCH<x>:TRIGger:A:SETHold:DATa:THReshold:REF<x> {NR3|ECL|TTL}
- SEARCH:SEARCH<x>:TRIGger:A:SETHold:DATa:THReshold:REF<x>?
- SEARCH:SEARCH<x>:TRIGger:A:SETHold:HOLDTime <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:SETHold:HOLDTime?
- SEARCH:SEARCH<x>:TRIGger:A:SETHold:SETTime <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:SETHold:SETTime?
- SEARCH:SEARCH<x>:TRIGger:A:STATE:CLOCk:EDGE {FALL|RISe}
- SEARCH:SEARCH<x>:TRIGger:A:STATE:CLOCk:EDGE?
- SEARCH:SEARCH<x>:TRIGger:A:STATE:CLOCk:SOUrce {CH<x>|MATH<x>|REF<x>}
- SEARCH:SEARCH<x>:TRIGger:A:STATE:CLOCk:SOUrce?
- SEARCH:SEARCH<x>:TRIGger:A:STATE:WHEn {TRUe|FALSe}
- SEARCH:SEARCH<x>:TRIGger:A:STATE:WHEn?
- SEARCH:SEARCH<x>:TRIGger:A:TIMEOut:POLarity:CH<x> {STAYSHigh|STAYSLow|EITher}
- SEARCH:SEARCH<x>:TRIGger:A:TIMEOut:POLarity:CH<x>?
- SEARCH:SEARCH<x>:TRIGger:A:TIMEOut:POLarity:MATH<x> {STAYSHigh|STAYSLow|EITher}
- SEARCH:SEARCH<x>:TRIGger:A:TIMEOut:POLarity:MATH<x>?
- SEARCH:SEARCH<x>:TRIGger:A:TIMEOut:POLarity:REF<x> {STAYSHigh|STAYSLow|EITher}
- SEARCH:SEARCH<x>:TRIGger:A:TIMEOut:POLarity:REF<x>?
- SEARCH:SEARCH<x>:TRIGger:A:TIMEOut:TIMe <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:TIMEOut:TIMe?
- SEARCH:SEARCH<x>:TRIGger:A:TRANsition:DELTATime <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:TRANsition:DELTATime?
- SEARCH:SEARCH<x>:TRIGger:A:TRANsition:POLarity:CH<x> {EITher|NEGAtive|POSITIVe}
- SEARCH:SEARCH<x>:TRIGger:A:TRANsition:POLarity:CH<x>?
- SEARCH:SEARCH<x>:TRIGger:A:TRANsition:POLarity:MATH<x> {EITher|NEGAtive|POSITIVe}
- SEARCH:SEARCH<x>:TRIGger:A:TRANsition:POLarity:MATH<x>?
- SEARCH:SEARCH<x>:TRIGger:A:TRANsition:POLarity:REF<x> {EITher|NEGAtive|POSITIVe}
- SEARCH:SEARCH<x>:TRIGger:A:TRANsition:POLarity:REF<x>?
- SEARCH:SEARCH<x>:TRIGger:A:TRANsition:THReshold:HIGH:CH<x> <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:TRANsition:THReshold:HIGH:CH<x>?
- SEARCH:SEARCH<x>:TRIGger:A:TRANsition:THReshold:HIGH:MATH<x> <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:TRANsition:THReshold:HIGH:MATH<x>?
- SEARCH:SEARCH<x>:TRIGger:A:TRANsition:THReshold:HIGH:REF<x> <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:TRANsition:THReshold:HIGH:REF<x>?
- SEARCH:SEARCH<x>:TRIGger:A:TRANsition:THReshold:LOW:CH<x> <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:TRANsition:THReshold:LOW:CH<x>?
- SEARCH:SEARCH<x>:TRIGger:A:TRANsition:THReshold:LOW:MATH<x> <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:TRANsition:THReshold:LOW:MATH<x>?
- SEARCH:SEARCH<x>:TRIGger:A:TRANsition:THReshold:LOW:REF<x> <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:TRANsition:THReshold:LOW:REF<x>?
- SEARCH:SEARCH<x>:TRIGger:A:TRANsition:WHEn {FASTERthan|SLOWERthan}
- SEARCH:SEARCH<x>:TRIGger:A:TRANsition:WHEn?
- SEARCH:SEARCH<x>:TRIGger:A:TYPe {EDGE|RUNT|TRANsition|PATtern|GLItch|SETHold|UNDEFINED|WIDth|TIMEOut|WINdow|STATE|DDRRead|DDRWrite|DDRREADWrite}
- SEARCH:SEARCH<x>:TRIGger:A:TYPe?
- SEARCH:SEARCH<x>:TRIGger:A:WIDth:HIGHLimit <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:WIDth:HIGHLimit?
- SEARCH:SEARCH<x>:TRIGger:A:WIDth:LOWLimit <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:WIDth:LOWLimit?
- SEARCH:SEARCH<x>:TRIGger:A:WIDth:POLarity:CH<x> {NEGAtive|POSITIVe}
- SEARCH:SEARCH<x>:TRIGger:A:WIDth:POLarity:CH<x>?
- SEARCH:SEARCH<x>:TRIGger:A:WIDth:POLarity:MATH<x> {NEGAtive|POSITIVe}
- SEARCH:SEARCH<x>:TRIGger:A:WIDth:POLarity:MATH<x>?
- SEARCH:SEARCH<x>:TRIGger:A:WIDth:POLarity:REF<x> {NEGAtive|POSITIVe}
- SEARCH:SEARCH<x>:TRIGger:A:WIDth:POLarity:REF<x>?
- SEARCH:SEARCH<x>:TRIGger:A:WIDth:WHEn {OUTside|WIThin}
- SEARCH:SEARCH<x>:TRIGger:A:WIDth:WHEn?
- SEARCH:SEARCH<x>:TRIGger:A:WINdow:EVENT {OUTSIDEGreater|INSIDEGreater|ENTERSWindow|EXITSWindow}
- SEARCH:SEARCH<x>:TRIGger:A:WINdow:EVENT?
- SEARCH:SEARCH<x>:TRIGger:A:WINdow:THReshold:HIGH:CH<x> <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:WINdow:THReshold:HIGH:CH<x>?
- SEARCH:SEARCH<x>:TRIGger:A:WINdow:THReshold:HIGH:MATH<x> <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:WINdow:THReshold:HIGH:MATH<x>?
- SEARCH:SEARCH<x>:TRIGger:A:WINdow:THReshold:HIGH:REF<x> <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:WINdow:THReshold:HIGH:REF<x>?
- SEARCH:SEARCH<x>:TRIGger:A:WINdow:THReshold:LOW:CH<x> <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:WINdow:THReshold:LOW:CH<x>?
- SEARCH:SEARCH<x>:TRIGger:A:WINdow:THReshold:LOW:MATH<x> <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:WINdow:THReshold:LOW:MATH<x>?
- SEARCH:SEARCH<x>:TRIGger:A:WINdow:THReshold:LOW:REF<x> <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:WINdow:THReshold:LOW:REF<x>?
- SEARCH:SEARCH<x>:TRIGger:A:WINdow:WIDth <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:WINdow:WIDth?
- SEARCH:SEARCH<x>?
- SEARCH:STOP {<NR1>|OFF|ON|1|0}
- SEARCH:STOP?

Search ¶

Bases: SCPICmdRead

The SEARCH command tree.

Usage

Using the .query() method will send the SEARCH? query.
Using the .verify(value) method will send the SEARCH? query and raise an AssertionError if the returned value does not match value.

Properties

.markallevents: The SEARCH:MARKALLevents command.
.search: The SEARCH:SEARCH<x> command.
.stop: The SEARCH:STOP command.

markallevents `property` ¶

markallevents: SearchMarkallevents

Return the SEARCH:MARKALLevents command.

Description

This command sets or queries the mark all trigger events setting.

Usage

Using the .query() method will send the SEARCH:MARKALLevents? query.
Using the .verify(value) method will send the SEARCH:MARKALLevents? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:MARKALLevents value command.

SCPI Syntax

- SEARCH:MARKALLevents {ON|OFF|<NR1>}
- SEARCH:MARKALLevents?

Info

<NR1> = 0 disables the function; any other value enables it.
OFF disables the function.
ON enables the mark all trigger events function.

search `property` ¶

search: dict[int, SearchSearchItem]

Return the SEARCH:SEARCH<x> command.

Description

This command converts the specified search marks to the user marks. can be 1 to 8.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x> value command.

SCPI Syntax

- SEARCH:SEARCH<x> <QString>
- SEARCH:SEARCH<x>?

Info

<QString> specifies the user search marks.

Sub-properties

.copy: The SEARCH:SEARCH<x>:COPy command.
.state: The SEARCH:SEARCH<x>:STATE command.
.total: The SEARCH:SEARCH<x>:TOTAL command.
.triger: The SEARCH:SEARCH<x>:TRIGer command tree.
.trigger: The SEARCH:SEARCH<x>:TRIGger command tree.

stop `property` ¶

stop: SearchStop

Return the SEARCH:STOP command.

Description

This command sets or queries the stop of acquisitions when a search finds an event.

Usage

Using the .query() method will send the SEARCH:STOP? query.
Using the .verify(value) method will send the SEARCH:STOP? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:STOP value command.

SCPI Syntax

- SEARCH:STOP {<NR1>|OFF|ON|1|0}
- SEARCH:STOP?

Info

<NR1> any numerical nonzero, stops the acquisition.
OFF continues the acquisition.
ON stops the acquisition.
1 stops the acquisition.
0 continues the acquisition.

SearchMarkallevents ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:MARKALLevents command.

Description

This command sets or queries the mark all trigger events setting.

Usage

Using the .query() method will send the SEARCH:MARKALLevents? query.
Using the .verify(value) method will send the SEARCH:MARKALLevents? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:MARKALLevents value command.

SCPI Syntax

- SEARCH:MARKALLevents {ON|OFF|<NR1>}
- SEARCH:MARKALLevents?

Info

<NR1> = 0 disables the function; any other value enables it.
OFF disables the function.
ON enables the mark all trigger events function.

SearchSearchItem ¶

Bases: ValidatedDynamicNumberCmd, SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x> command.

Description

This command converts the specified search marks to the user marks. can be 1 to 8.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x> value command.

SCPI Syntax

- SEARCH:SEARCH<x> <QString>
- SEARCH:SEARCH<x>?

Info

<QString> specifies the user search marks.

Properties

.copy: The SEARCH:SEARCH<x>:COPy command.
.state: The SEARCH:SEARCH<x>:STATE command.
.total: The SEARCH:SEARCH<x>:TOTAL command.
.triger: The SEARCH:SEARCH<x>:TRIGer command tree.
.trigger: The SEARCH:SEARCH<x>:TRIGger command tree.

copy `property` ¶

copy: SearchSearchItemCopy

Return the SEARCH:SEARCH<x>:COPy command.

Description

This command (no query form) copies the search criteria to the trigger, the trigger criteria to a search, or copy search to search. is the search number.

Usage

Using the .write(value) method will send the SEARCH:SEARCH<x>:COPy value command.

SCPI Syntax

- SEARCH:SEARCH<x>:COPy {SEARCHtotrigger|TRIGgertosearch|FROMSearch<x>}

Info

SEARCHtotrigger copies the search criteria to the trigger.
TRIGgertosearch copies the trigger criteria to the search.
FROMSearch<x> copies the search criteria to the search, where is 1 to 8.

state `property` ¶

state: SearchSearchItemState

Return the SEARCH:SEARCH<x>:STATE command.

Description

Sets the search state to on or off. is the search number, which is always 1. The query form returns the search state. A series of example command sequences showing different searches and triggers is included as an appendix.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:STATE? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:STATE? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:STATE value command.

SCPI Syntax

- SEARCH:SEARCH<x>:STATE {ON|OFF|<NR1>}
- SEARCH:SEARCH<x>:STATE?

Info

OFF or = 0 sets the search state to off.
ON or ≠ 0 sets the search state to on.

total `property` ¶

total: SearchSearchItemTotal

Return the SEARCH:SEARCH<x>:TOTAL command.

Description

This query-only command returns the total number of found search marks for this search. The search number is specified by x.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TOTAL? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TOTAL? query and raise an AssertionError if the returned value does not match value.

SCPI Syntax

- SEARCH:SEARCH<x>:TOTAL?

triger `property` ¶

triger: SearchSearchItemTriger

Return the SEARCH:SEARCH<x>:TRIGer command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGer? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGer? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.a: The SEARCH:SEARCH<x>:TRIGer:A command tree.

trigger `property` ¶

trigger: SearchSearchItemTrigger

Return the SEARCH:SEARCH<x>:TRIGger command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.a: The SEARCH:SEARCH<x>:TRIGger:A command tree.

SearchSearchItemCopy ¶

Bases: SCPICmdWrite

The SEARCH:SEARCH<x>:COPy command.

Description

This command (no query form) copies the search criteria to the trigger, the trigger criteria to a search, or copy search to search. is the search number.

Usage

Using the .write(value) method will send the SEARCH:SEARCH<x>:COPy value command.

SCPI Syntax

- SEARCH:SEARCH<x>:COPy {SEARCHtotrigger|TRIGgertosearch|FROMSearch<x>}

Info

SEARCHtotrigger copies the search criteria to the trigger.
TRIGgertosearch copies the trigger criteria to the search.
FROMSearch<x> copies the search criteria to the search, where is 1 to 8.

SearchSearchItemState ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:STATE command.

Description

Sets the search state to on or off. is the search number, which is always 1. The query form returns the search state. A series of example command sequences showing different searches and triggers is included as an appendix.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:STATE? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:STATE? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:STATE value command.

SCPI Syntax

- SEARCH:SEARCH<x>:STATE {ON|OFF|<NR1>}
- SEARCH:SEARCH<x>:STATE?

Info

OFF or = 0 sets the search state to off.
ON or ≠ 0 sets the search state to on.

SearchSearchItemTotal ¶

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TOTAL command.

Description

This query-only command returns the total number of found search marks for this search. The search number is specified by x.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TOTAL? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TOTAL? query and raise an AssertionError if the returned value does not match value.

SCPI Syntax

- SEARCH:SEARCH<x>:TOTAL?

SearchSearchItemTriger ¶

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGer command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGer? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGer? query and raise an AssertionError if the returned value does not match value.

Properties

.a: The SEARCH:SEARCH<x>:TRIGer:A command tree.

a `property` ¶

a: SearchSearchItemTrigerA

Return the SEARCH:SEARCH<x>:TRIGer:A command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGer:A? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGer:A? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.bus: The SEARCH:SEARCH<x>:TRIGer:A:BUS command tree.

SearchSearchItemTrigerA ¶

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGer:A command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGer:A? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGer:A? query and raise an AssertionError if the returned value does not match value.

Properties

.bus: The SEARCH:SEARCH<x>:TRIGer:A:BUS command tree.

bus `property` ¶

bus: SearchSearchItemTrigerABus

Return the SEARCH:SEARCH<x>:TRIGer:A:BUS command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGer:A:BUS? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGer:A:BUS? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.pcie: The SEARCH:SEARCH<x>:TRIGer:A:BUS:PCIE command tree.

SearchSearchItemTrigerABus ¶

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGer:A:BUS command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGer:A:BUS? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGer:A:BUS? query and raise an AssertionError if the returned value does not match value.

Properties

.pcie: The SEARCH:SEARCH<x>:TRIGer:A:BUS:PCIE command tree.

pcie `property` ¶

pcie: SearchSearchItemTrigerABusPcie

Return the SEARCH:SEARCH<x>:TRIGer:A:BUS:PCIE command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGer:A:BUS:PCIE? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGer:A:BUS:PCIE? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.syncheader: The SEARCH:SEARCH<x>:TRIGer:A:BUS:PCIE:SYNCHeader command.

SearchSearchItemTrigerABusPcie ¶

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGer:A:BUS:PCIE command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGer:A:BUS:PCIE? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGer:A:BUS:PCIE? query and raise an AssertionError if the returned value does not match value.

Properties

.syncheader: The SEARCH:SEARCH<x>:TRIGer:A:BUS:PCIE:SYNCHeader command.

syncheader `property` ¶

syncheader: SearchSearchItemTrigerABusPcieSyncheader

Return the SEARCH:SEARCH<x>:TRIGer:A:BUS:PCIE:SYNCHeader command.

Description

This command sets or queries the PCIE search sync header. The search number is specified by x. This is only available for data rate 8 Gb/s and above.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGer:A:BUS:PCIE:SYNCHeader? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGer:A:BUS:PCIE:SYNCHeader? query and raise an AssertionError if the returned value does not match value.
Using the .write() method will send the SEARCH:SEARCH<x>:TRIGer:A:BUS:PCIE:SYNCHeader command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGer:A:BUS:PCIE:SYNCHeader
- SEARCH:SEARCH<x>:TRIGer:A:BUS:PCIE:SYNCHeader?

SearchSearchItemTrigerABusPcieSyncheader ¶

Bases: SCPICmdWriteNoArguments, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGer:A:BUS:PCIE:SYNCHeader command.

Description

This command sets or queries the PCIE search sync header. The search number is specified by x. This is only available for data rate 8 Gb/s and above.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGer:A:BUS:PCIE:SYNCHeader? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGer:A:BUS:PCIE:SYNCHeader? query and raise an AssertionError if the returned value does not match value.
Using the .write() method will send the SEARCH:SEARCH<x>:TRIGer:A:BUS:PCIE:SYNCHeader command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGer:A:BUS:PCIE:SYNCHeader
- SEARCH:SEARCH<x>:TRIGer:A:BUS:PCIE:SYNCHeader?

SearchSearchItemTrigger ¶

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger? query and raise an AssertionError if the returned value does not match value.

Properties

.a: The SEARCH:SEARCH<x>:TRIGger:A command tree.

a `property` ¶

a: SearchSearchItemTriggerA

Return the SEARCH:SEARCH<x>:TRIGger:A command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.bus: The SEARCH:SEARCH<x>:TRIGger:A:BUS command tree.
.ddrmemory: The SEARCH:SEARCH<x>:TRIGger:A:DDRMemory command tree.
.edge: The SEARCH:SEARCH<x>:TRIGger:A:EDGE command tree.
.glitch: The SEARCH:SEARCH<x>:TRIGger:A:GLItch command tree.
.level: The SEARCH:SEARCH<x>:TRIGger:A:LEVel command tree.
.logic: The SEARCH:SEARCH<x>:TRIGger:A:LOGIc command tree.
.pattern: The SEARCH:SEARCH<x>:TRIGger:A:PATtern command tree.
.pulse: The SEARCH:SEARCH<x>:TRIGger:A:PULse command tree.
.runt: The SEARCH:SEARCH<x>:TRIGger:A:RUNT command tree.
.sethold: The SEARCH:SEARCH<x>:TRIGger:A:SETHold command tree.
.state: The SEARCH:SEARCH<x>:TRIGger:A:STATE command tree.
.timeout: The SEARCH:SEARCH<x>:TRIGger:A:TIMEOut command tree.
.transition: The SEARCH:SEARCH<x>:TRIGger:A:TRANsition command tree.
.type: The SEARCH:SEARCH<x>:TRIGger:A:TYPe command.
.width: The SEARCH:SEARCH<x>:TRIGger:A:WIDth command tree.
.window: The SEARCH:SEARCH<x>:TRIGger:A:WINdow command tree.

SearchSearchItemTriggerA ¶

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A? query and raise an AssertionError if the returned value does not match value.

Properties

.bus: The SEARCH:SEARCH<x>:TRIGger:A:BUS command tree.
.ddrmemory: The SEARCH:SEARCH<x>:TRIGger:A:DDRMemory command tree.
.edge: The SEARCH:SEARCH<x>:TRIGger:A:EDGE command tree.
.glitch: The SEARCH:SEARCH<x>:TRIGger:A:GLItch command tree.
.level: The SEARCH:SEARCH<x>:TRIGger:A:LEVel command tree.
.logic: The SEARCH:SEARCH<x>:TRIGger:A:LOGIc command tree.
.pattern: The SEARCH:SEARCH<x>:TRIGger:A:PATtern command tree.
.pulse: The SEARCH:SEARCH<x>:TRIGger:A:PULse command tree.
.runt: The SEARCH:SEARCH<x>:TRIGger:A:RUNT command tree.
.sethold: The SEARCH:SEARCH<x>:TRIGger:A:SETHold command tree.
.state: The SEARCH:SEARCH<x>:TRIGger:A:STATE command tree.
.timeout: The SEARCH:SEARCH<x>:TRIGger:A:TIMEOut command tree.
.transition: The SEARCH:SEARCH<x>:TRIGger:A:TRANsition command tree.
.type: The SEARCH:SEARCH<x>:TRIGger:A:TYPe command.
.width: The SEARCH:SEARCH<x>:TRIGger:A:WIDth command tree.
.window: The SEARCH:SEARCH<x>:TRIGger:A:WINdow command tree.

bus `property` ¶

bus: SearchSearchItemTriggerABus

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.can: The SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN command tree.
.ethernet: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet command tree.
.flexray: The SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY command tree.
.i2c: The SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C command tree.
.lin: The SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN command tree.
.mil1553b: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B command tree.
.mipicsitwo: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo command tree.
.mipidsione: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne command tree.
.parallel: The SEARCH:SEARCH<x>:TRIGger:A:BUS:PARallel command tree.
.pcie: The SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE command tree.
.rs232c: The SEARCH:SEARCH<x>:TRIGger:A:BUS:RS232C command tree.
.s64b66b: The SEARCH:SEARCH<x>:TRIGger:A:BUS:S64B66B command tree.
.s8b10b: The SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B command tree.
.source: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SOUrce command.
.spi: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SPI command tree.
.usb: The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB command tree.

ddrmemory `property` ¶

ddrmemory: SearchSearchItemTriggerADdrmemory

Return the SEARCH:SEARCH<x>:TRIGger:A:DDRMemory command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:DDRMemory? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:DDRMemory? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.autobitrate: The SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:AUTOBitrate command.
.autoreflevel: The SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:AUTOReflevel command.
.bitrate: The SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:BITRate command.
.csactive: The SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:CSActive command.
.cslevel: The SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:CSLevel command.
.csmode: The SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:CSMode command.
.cssource: The SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:CSSource command.
.datasource: The SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:DATASource command.
.hysteresis: The SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:HYSteresis command.
.margin: The SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:MARgin command.
.maxcas: The SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:MAXCas command.
.mincas: The SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:MINCas command.
.reflevel: The SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:REFLevel command tree.
.standard: The SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:STANdard command.
.strobesource: The SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:STROBEsource command.

edge `property` ¶

edge: SearchSearchItemTriggerAEdge

Return the SEARCH:SEARCH<x>:TRIGger:A:EDGE command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:EDGE? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:EDGE? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.slope: The SEARCH:SEARCH<x>:TRIGger:A:EDGE:SLOpe command tree.
.source: The SEARCH:SEARCH<x>:TRIGger:A:EDGE:SOUrce command.

glitch `property` ¶

glitch: SearchSearchItemTriggerAGlitch

Return the SEARCH:SEARCH<x>:TRIGger:A:GLItch command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:GLItch? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:GLItch? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.polarity: The SEARCH:SEARCH<x>:TRIGger:A:GLItch:POLarity command tree.
.trigif: The SEARCH:SEARCH<x>:TRIGger:A:GLItch:TRIGIF command.
.width: The SEARCH:SEARCH<x>:TRIGger:A:GLItch:WIDth command.

level `property` ¶

level: SearchSearchItemTriggerALevel

Return the SEARCH:SEARCH<x>:TRIGger:A:LEVel command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:LEVel? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LEVel? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.ch: The SEARCH:SEARCH<x>:TRIGger:A:LEVel:CH<x> command.
.math: The SEARCH:SEARCH<x>:TRIGger:A:LEVel:MATH<x> command.
.ref: The SEARCH:SEARCH<x>:TRIGger:A:LEVel:REF<x> command.

logic `property` ¶

logic: SearchSearchItemTriggerALogic

Return the SEARCH:SEARCH<x>:TRIGger:A:LOGIc command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.function: The SEARCH:SEARCH<x>:TRIGger:A:LOGIc:FUNCtion command.
.input: The SEARCH:SEARCH<x>:TRIGger:A:LOGIc:INPut command tree.
.threshold: The SEARCH:SEARCH<x>:TRIGger:A:LOGIc:THReshold command tree.

pattern `property` ¶

pattern: SearchSearchItemTriggerAPattern

Return the SEARCH:SEARCH<x>:TRIGger:A:PATtern command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:PATtern? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:PATtern? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.when: The SEARCH:SEARCH<x>:TRIGger:A:PATtern:WHEn command.

pulse `property` ¶

pulse: SearchSearchItemTriggerAPulse

Return the SEARCH:SEARCH<x>:TRIGger:A:PULse command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:PULse? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:PULse? query and raise an AssertionError if the returned value does not match value.

Info

CH<x> specifies one input channel as the edge source, where = 1, 2, 3 or 4.

Sub-properties

.source: The SEARCH:SEARCH<x>:TRIGger:A:PULse:SOUrce command.

runt `property` ¶

runt: SearchSearchItemTriggerARunt

Return the SEARCH:SEARCH<x>:TRIGger:A:RUNT command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:RUNT? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:RUNT? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.polarity: The SEARCH:SEARCH<x>:TRIGger:A:RUNT:POLarity command tree.
.threshold: The SEARCH:SEARCH<x>:TRIGger:A:RUNT:THReshold command tree.
.when: The SEARCH:SEARCH<x>:TRIGger:A:RUNT:WHEn command.
.width: The SEARCH:SEARCH<x>:TRIGger:A:RUNT:WIDth command.

sethold `property` ¶

sethold: SearchSearchItemTriggerASethold

Return the SEARCH:SEARCH<x>:TRIGger:A:SETHold command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.clock: The SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk command tree.
.data: The SEARCH:SEARCH<x>:TRIGger:A:SETHold:DATa command tree.
.holdtime: The SEARCH:SEARCH<x>:TRIGger:A:SETHold:HOLDTime command.
.settime: The SEARCH:SEARCH<x>:TRIGger:A:SETHold:SETTime command.

state `property` ¶

state: SearchSearchItemTriggerAState

Return the SEARCH:SEARCH<x>:TRIGger:A:STATE command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:STATE? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:STATE? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.clock: The SEARCH:SEARCH<x>:TRIGger:A:STATE:CLOCk command tree.
.when: The SEARCH:SEARCH<x>:TRIGger:A:STATE:WHEn command.

timeout `property` ¶

timeout: SearchSearchItemTriggerATimeout

Return the SEARCH:SEARCH<x>:TRIGger:A:TIMEOut command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:TIMEOut? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:TIMEOut? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.polarity: The SEARCH:SEARCH<x>:TRIGger:A:TIMEOut:POLarity command tree.
.time: The SEARCH:SEARCH<x>:TRIGger:A:TIMEOut:TIMe command.

transition `property` ¶

transition: SearchSearchItemTriggerATransition

Return the SEARCH:SEARCH<x>:TRIGger:A:TRANsition command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:TRANsition? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:TRANsition? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.deltatime: The SEARCH:SEARCH<x>:TRIGger:A:TRANsition:DELTATime command.
.polarity: The SEARCH:SEARCH<x>:TRIGger:A:TRANsition:POLarity command tree.
.threshold: The SEARCH:SEARCH<x>:TRIGger:A:TRANsition:THReshold command tree.
.when: The SEARCH:SEARCH<x>:TRIGger:A:TRANsition:WHEn command.

type `property` ¶

type: SearchSearchItemTriggerAType

Return the SEARCH:SEARCH<x>:TRIGger:A:TYPe command.

Description

This command sets or queries the trigger type setting for a search to determine where to place a mark. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:TYPe? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:TYPe? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:TYPe value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:TYPe {EDGE|RUNT|TRANsition|PATtern|GLItch|SETHold|UNDEFINED|WIDth|TIMEOut|WINdow|STATE|DDRRead|DDRWrite|DDRREADWrite}
- SEARCH:SEARCH<x>:TRIGger:A:TYPe?

Info

EDGE triggers when the source input signal amplitude crosses the specified level in the direction given by the slope.
RUNT triggers when a pulse crosses the first preset voltage threshold but does not cross the second preset threshold before recrossing the first. The thresholds are set with the SEARCH:SEARCH<x>:TRIGger:A:RUNt:HIGH and SEARCH:SEARCH<x>:TRIGger:A:RUNt:LOW THRESHOLD commands.
TRANsition triggers when a pulse crosses both thresholds in the same direction as the specified polarity and the transition time between the two threshold crossings is greater or less than the specified time delta.
PATtern trigger on a functional pattern combination of one to four input signal sources.
GLItch triggers at the trailing edge of the glitch pulse where the signal crosses the trigger level.
SETHold triggers on the data input signal transitions relative to the clock input signal transitions within the setup and hold time violation zone.
UNDEFINED is the default. To perform a search, select a different argument.
WIDth triggers on input signal source pulses that are inside or outside of the given time range.
TIMEOut triggers on an input signal source that stays above, stays below, or stays either above or beow the trigger level for a given time.
WINdow triggers on an input signal source that enters or exits the horizontal band defined by the two trigger levels.
STATE triggers on a functional pattern combination of one to three data sources at the time of the clock transition.
DDRRead triggers at the start and end of the read bus.
DDRWrite triggers at the start and end of the write bus.
DDRREADWrite triggers at the start and end of both the read and write bus.

width `property` ¶

width: SearchSearchItemTriggerAWidth

Return the SEARCH:SEARCH<x>:TRIGger:A:WIDth command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:WIDth? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:WIDth? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.highlimit: The SEARCH:SEARCH<x>:TRIGger:A:WIDth:HIGHLimit command.
.lowlimit: The SEARCH:SEARCH<x>:TRIGger:A:WIDth:LOWLimit command.
.polarity: The SEARCH:SEARCH<x>:TRIGger:A:WIDth:POLarity command tree.
.when: The SEARCH:SEARCH<x>:TRIGger:A:WIDth:WHEn command.

window `property` ¶

window: SearchSearchItemTriggerAWindow

Return the SEARCH:SEARCH<x>:TRIGger:A:WINdow command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:WINdow? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:WINdow? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.event: The SEARCH:SEARCH<x>:TRIGger:A:WINdow:EVENT command.
.threshold: The SEARCH:SEARCH<x>:TRIGger:A:WINdow:THReshold command tree.
.width: The SEARCH:SEARCH<x>:TRIGger:A:WINdow:WIDth command.

SearchSearchItemTriggerABus ¶

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS? query and raise an AssertionError if the returned value does not match value.

Properties

.can: The SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN command tree.
.ethernet: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet command tree.
.flexray: The SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY command tree.
.i2c: The SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C command tree.
.lin: The SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN command tree.
.mil1553b: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B command tree.
.mipicsitwo: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo command tree.
.mipidsione: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne command tree.
.parallel: The SEARCH:SEARCH<x>:TRIGger:A:BUS:PARallel command tree.
.pcie: The SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE command tree.
.rs232c: The SEARCH:SEARCH<x>:TRIGger:A:BUS:RS232C command tree.
.s64b66b: The SEARCH:SEARCH<x>:TRIGger:A:BUS:S64B66B command tree.
.s8b10b: The SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B command tree.
.source: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SOUrce command.
.spi: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SPI command tree.
.usb: The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB command tree.

can `property` ¶

can: SearchSearchItemTriggerABusCan

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.condition: The SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:CONDition command.
.data: The SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa command tree.
.frametype: The SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:FRAMEtype command.
.identifier: The SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:IDentifier command tree.

ethernet `property` ¶

ethernet: SearchSearchItemTriggerABusEthernet

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.condition: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:CONDition command.
.data: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:DATa command tree.
.ipheader: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:IPHeader command tree.
.mac: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC command tree.
.qtag: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:QTAG command tree.
.qualifier: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:QUALifier command.
.tcpheader: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader command tree.

flexray `property` ¶

flexray: SearchSearchItemTriggerABusFlexray

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.condition: The SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:CONDition command.
.cyclecount: The SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:CYCLEcount command tree.
.data: The SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:DATa command tree.
.eoftype: The SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:EOFTYPE command.
.errtype: The SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:ERRTYPE command.
.frametype: The SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:FRAMEType command.
.header: The SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:HEADER command tree.
.identifier: The SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:IDentifier command tree.

i2c `property` ¶

i2c: SearchSearchItemTriggerABusI2c

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.address: The SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:ADDress command tree.
.condition: The SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:CONDition command.
.data: The SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:DATa command tree.

lin `property` ¶

lin: SearchSearchItemTriggerABusLin

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.condition: The SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:CONDition command.
.data: The SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa command tree.
.errtype: The SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:ERRTYPE command.
.identifier: The SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:IDentifier command tree.

mil1553b `property` ¶

mil1553b: SearchSearchItemTriggerABusMil1553b

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.command: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND command tree.
.condition: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:CONDition command.
.data: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:DATA command tree.
.errtype: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:ERRTYPE command.
.status: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATUS command tree.
.time: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:TIME command tree.

mipicsitwo `property` ¶

mipicsitwo: SearchSearchItemTriggerABusMipicsitwo

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.condition: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:CONDition command.
.dtlong: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:DTLong command.
.dtshort: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:DTShort command.
.error: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:ERRor command.
.escape: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:ESCape command.
.offset: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:OFFset command tree.
.packetdata: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:PACKetdata command tree.
.payload: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:PAYLoad command tree.
.pixel: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:PIXel command tree.
.raw: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:RAW command tree.
.rgb: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:RGB command tree.
.vc: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:VC command.
.warning: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:WARNing command.
.wc: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:WC command tree.
.yuv: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:YUV command tree.

mipidsione `property` ¶

mipidsione: SearchSearchItemTriggerABusMipidsione

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.ackerrreport: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:ACKERRreport command.
.condition: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:CONDition command.
.direction: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:DIRection command.
.dtlong: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:DTLong command.
.dtshort: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:DTShort command.
.error: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:ERRor command.
.escape: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:ESCape command.
.offset: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:OFFset command tree.
.packetdata: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:PACKetdata command tree.
.payload: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:PAYLoad command tree.
.pixel: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:PIXel command tree.
.rgb: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:RGB command tree.
.vc: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:VC command.
.warning: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:WARNing command.
.wc: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:WC command tree.
.ycbcr: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:YCBCR command tree.

parallel `property` ¶

parallel: SearchSearchItemTriggerABusParallel

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:PARallel command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PARallel? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PARallel? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.data: The SEARCH:SEARCH<x>:TRIGger:A:BUS:PARallel:DATa command tree.

pcie `property` ¶

pcie: SearchSearchItemTriggerABusPcie

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.character: The SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:CHARacter command tree.
.condition: The SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:CONDition command.
.disparity: The SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:DISParity command.
.error: The SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:ERROR command tree.
.format: The SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:FORMat command.
.longorderedset: The SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:LONGORDERedset command.
.pattern: The SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:PATtern command tree.

rs232c `property` ¶

rs232c: SearchSearchItemTriggerABusRs232c

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:RS232C command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:RS232C? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:RS232C? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.condition: The SEARCH:SEARCH<x>:TRIGger:A:BUS:RS232C:CONDition command.
.data: The SEARCH:SEARCH<x>:TRIGger:A:BUS:RS232C:DATa command tree.

s64b66b `property` ¶

s64b66b: SearchSearchItemTriggerABusS64b66b

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:S64B66B command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:S64B66B? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:S64B66B? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.blockone: The SEARCH:SEARCH<x>:TRIGger:A:BUS:S64B66B:BLOCKONE command.
.blockonethentwo: The SEARCH:SEARCH<x>:TRIGger:A:BUS:S64B66B:BLOCKONETHENTWO command tree.
.condition: The SEARCH:SEARCH<x>:TRIGger:A:BUS:S64B66B:CONDition command.

s8b10b `property` ¶

s8b10b: SearchSearchItemTriggerABusS8b10b

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.character: The SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:CHARacter command tree.
.condition: The SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:CONDition command.
.disparity: The SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:DISParity command.
.error: The SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:ERROR command tree.
.format: The SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:FORMat command.
.pattern: The SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:PATtern command tree.

source `property` ¶

source: SearchSearchItemTriggerABusSource

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:SOUrce command.

Description

This command sets or queries the bus source for the bus search to determine where to place a mark. The search number is specified by x.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SOUrce? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SOUrce? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SOUrce value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:SOUrce {B0|B1|B2|B3|B4|B5|B6|B7|B8|B9|B10|B11|B12|B13|B14|B15|B16}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SOUrce?

Info

B<x> specifies the bus source as a bus number from B01 to B16. x has a minimum of 0 and a maximum of 16.

spi `property` ¶

spi: SearchSearchItemTriggerABusSpi

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:SPI command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SPI? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SPI? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.condition: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:CONDition command.
.data: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:DATa command tree.

usb `property` ¶

usb: SearchSearchItemTriggerABusUsb

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.address: The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ADDress command tree.
.character: The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:CHARacter command tree.
.condition: The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:CONDition command.
.data: The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa command tree.
.disparity: The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DISParity command.
.endpoint: The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ENDPoint command tree.
.error: The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ERROR command tree.
.errtype: The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ERRTYPE command.
.format: The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:FORMat command.
.handshaketype: The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:HANDSHAKEType command.
.longorderedset: The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:LONGORDERedset command.
.packets: The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:PACKets command.
.pattern: The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:PATtern command tree.
.qualifier: The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:QUAlifier command.
.sof: The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SOF command tree.
.specialtype: The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPECIALType command.
.split: The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT command tree.
.tokentype: The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:TOKENType command.

SearchSearchItemTriggerABusCan ¶

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN? query and raise an AssertionError if the returned value does not match value.

Properties

.condition: The SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:CONDition command.
.data: The SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa command tree.
.frametype: The SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:FRAMEtype command.
.identifier: The SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:IDentifier command tree.

condition `property` ¶

condition: SearchSearchItemTriggerABusCanCondition

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:CONDition command.

Description

This command sets or queries the CAN bus trigger condition. The search number is specified by x.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:CONDition? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:CONDition? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:CONDition value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:CONDition {ERRor|DATA|IDANDDATA|EOF|IDentifier|ACKMISS|SOF|FRAMEtype}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:CONDition?

data `property` ¶

data: SearchSearchItemTriggerABusCanData

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.format: The SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:FORMat command.
.qualifier: The SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:QUALifier command.
.size: The SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:SIZe command.
.value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:VALue command.

frametype `property` ¶

frametype: SearchSearchItemTriggerABusCanFrametype

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:FRAMEtype command.

Description

This command sets or queries CAN bus trigger frame type to be used when searching on a CAN bus signal. The search condition must be set to FRAMEtype. The search number is specified by x.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:FRAMEtype? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:FRAMEtype? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:FRAMEtype value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:FRAMEtype {DATa|ERRor|OVERLoad|REMote}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:FRAMEtype?

Info

DATa sets the frame type to data.
ERRor sets the frame type to error.
OVERLoad sets the frame type to overload.
REMote sets the frame type to remote.

identifier `property` ¶

identifier: SearchSearchItemTriggerABusCanIdentifier

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:IDentifier command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:IDentifier? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:IDentifier? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.direction: The SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:IDentifier:DIRection command.
.format: The SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:IDentifier:FORMat command.
.mode: The SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:IDentifier:MODe command.
.value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:IDentifier:VALue command.

SearchSearchItemTriggerABusCanCondition ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:CONDition command.

Description

This command sets or queries the CAN bus trigger condition. The search number is specified by x.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:CONDition? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:CONDition? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:CONDition value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:CONDition {ERRor|DATA|IDANDDATA|EOF|IDentifier|ACKMISS|SOF|FRAMEtype}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:CONDition?

SearchSearchItemTriggerABusCanData ¶

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa? query and raise an AssertionError if the returned value does not match value.

Properties

.format: The SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:FORMat command.
.qualifier: The SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:QUALifier command.
.size: The SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:SIZe command.
.value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:VALue command.

format `property` ¶

format: SearchSearchItemTriggerABusCanDataFormat

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:FORMat command.

Description

This command sets or queries the CAN bus trigger data format. The search number is specified by x.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:FORMat? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:FORMat? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:FORMat value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:FORMat {BINary|HEX}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:FORMat?

Info

BINary specifies the pattern format as binary.
HEX specifies the pattern format as hexadecimal.

qualifier `property` ¶

qualifier: SearchSearchItemTriggerABusCanDataQualifier

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:QUALifier command.

Description

This command sets or queries the CAN bus trigger data qualifier to be used when searching on a CAN bus signal. The search number is specified by x.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:QUALifier? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:QUALifier? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:QUALifier value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:QUALifier {EQUal|LESSEQual|MOREEQua|UNEQual|LESSthan|MOREthan}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:QUALifier?

Info

EQUal sets the data qualifier to equal.
LESSEQual sets the data qualifier to less equal.
MOREEQua sets the data qualifier to more equal.
UNEQual sets the data qualifier to unequal.
LESSthan sets the data qualifier to less than.
MOREthan sets the data qualifier to more than.

size `property` ¶

size: SearchSearchItemTriggerABusCanDataSize

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:SIZe command.

Description

This command sets or queries the CAN bus trigger data size in bytes. The search number is specified by x.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:SIZe? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:SIZe? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:SIZe value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:SIZe <nr3>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:SIZe?

Info

<nr3> specifies the data size.

value `property` ¶

value: SearchSearchItemTriggerABusCanDataValue

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:VALue command.

Description

This command sets or queries the CAN bus trigger data value. The search number is specified by x.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:VALue? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:VALue? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:VALue value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:VALue <string>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:VALue?

Info

<string> is the data value.

SearchSearchItemTriggerABusCanDataFormat ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:FORMat command.

Description

This command sets or queries the CAN bus trigger data format. The search number is specified by x.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:FORMat? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:FORMat? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:FORMat value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:FORMat {BINary|HEX}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:FORMat?

Info

BINary specifies the pattern format as binary.
HEX specifies the pattern format as hexadecimal.

SearchSearchItemTriggerABusCanDataQualifier ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:QUALifier command.

Description

This command sets or queries the CAN bus trigger data qualifier to be used when searching on a CAN bus signal. The search number is specified by x.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:QUALifier? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:QUALifier? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:QUALifier value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:QUALifier {EQUal|LESSEQual|MOREEQua|UNEQual|LESSthan|MOREthan}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:QUALifier?

Info

EQUal sets the data qualifier to equal.
LESSEQual sets the data qualifier to less equal.
MOREEQua sets the data qualifier to more equal.
UNEQual sets the data qualifier to unequal.
LESSthan sets the data qualifier to less than.
MOREthan sets the data qualifier to more than.

SearchSearchItemTriggerABusCanDataSize ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:SIZe command.

Description

This command sets or queries the CAN bus trigger data size in bytes. The search number is specified by x.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:SIZe? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:SIZe? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:SIZe value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:SIZe <nr3>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:SIZe?

Info

<nr3> specifies the data size.

SearchSearchItemTriggerABusCanDataValue ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:VALue command.

Description

This command sets or queries the CAN bus trigger data value. The search number is specified by x.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:VALue? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:VALue? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:VALue value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:VALue <string>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:DATa:VALue?

Info

<string> is the data value.

SearchSearchItemTriggerABusCanFrametype ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:FRAMEtype command.

Description

This command sets or queries CAN bus trigger frame type to be used when searching on a CAN bus signal. The search condition must be set to FRAMEtype. The search number is specified by x.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:FRAMEtype? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:FRAMEtype? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:FRAMEtype value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:FRAMEtype {DATa|ERRor|OVERLoad|REMote}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:FRAMEtype?

Info

DATa sets the frame type to data.
ERRor sets the frame type to error.
OVERLoad sets the frame type to overload.
REMote sets the frame type to remote.

SearchSearchItemTriggerABusCanIdentifier ¶

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:IDentifier command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:IDentifier? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:IDentifier? query and raise an AssertionError if the returned value does not match value.

Properties

.direction: The SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:IDentifier:DIRection command.
.format: The SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:IDentifier:FORMat command.
.mode: The SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:IDentifier:MODe command.
.value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:IDentifier:VALue command.

direction `property` ¶

direction: SearchSearchItemTriggerABusCanIdentifierDirection

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:IDentifier:DIRection command.

Description

This command sets or queries the CAN bus identifier direction. The search number is specified by x.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:IDentifier:DIRection? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:IDentifier:DIRection? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:IDentifier:DIRection value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:IDentifier:DIRection {DONTCare|READ|WRITE}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:IDentifier:DIRection?

Info

DONTCare specifies the direction is a don’t care.
READ specifies the read direction.
WRITE specifies the write direction.

format `property` ¶

format: SearchSearchItemTriggerABusCanIdentifierFormat

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:IDentifier:FORMat command.

Description

This command sets or queries the CAN bus trigger identifier format. The search number is specified by x.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:IDentifier:FORMat? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:IDentifier:FORMat? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:IDentifier:FORMat value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:IDentifier:FORMat {BINary|HEX}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:IDentifier:FORMat?

Info

BINary specifies the identifier format as binary.
HEX specifies the identifier format as hexadecimal.

mode `property` ¶

mode: SearchSearchItemTriggerABusCanIdentifierMode

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:IDentifier:MODe command.

Description

This command sets or queries the CAN bus trigger identifier (address) mode to be used when searching on a CAN bus signal. The search number is specified by x. The search condition must be set to IDANDDATA or DATA.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:IDentifier:MODe? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:IDentifier:MODe? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:IDentifier:MODe value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:IDentifier:MODe {EXTENDed|STandard}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:IDentifier:MODe?

Info

EXTENDed specifies the extended identifier mode.
STandard specifies the standard identifier mode.

value `property` ¶

value: SearchSearchItemTriggerABusCanIdentifierValue

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:IDentifier:VALue command.

Description

This command sets or queries CAN bus trigger identifier value. The search number is specified by x.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:IDentifier:VALue? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:IDentifier:VALue? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:IDentifier:VALue value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:IDentifier:VALue <string>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:IDentifier:VALue?

Info

<string> is the identifier value.

SearchSearchItemTriggerABusCanIdentifierDirection ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:IDentifier:DIRection command.

Description

This command sets or queries the CAN bus identifier direction. The search number is specified by x.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:IDentifier:DIRection? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:IDentifier:DIRection? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:IDentifier:DIRection value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:IDentifier:DIRection {DONTCare|READ|WRITE}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:IDentifier:DIRection?

Info

DONTCare specifies the direction is a don’t care.
READ specifies the read direction.
WRITE specifies the write direction.

SearchSearchItemTriggerABusCanIdentifierFormat ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:IDentifier:FORMat command.

Description

This command sets or queries the CAN bus trigger identifier format. The search number is specified by x.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:IDentifier:FORMat? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:IDentifier:FORMat? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:IDentifier:FORMat value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:IDentifier:FORMat {BINary|HEX}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:IDentifier:FORMat?

Info

BINary specifies the identifier format as binary.
HEX specifies the identifier format as hexadecimal.

SearchSearchItemTriggerABusCanIdentifierMode ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:IDentifier:MODe command.

Description

This command sets or queries the CAN bus trigger identifier (address) mode to be used when searching on a CAN bus signal. The search number is specified by x. The search condition must be set to IDANDDATA or DATA.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:IDentifier:MODe? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:IDentifier:MODe? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:IDentifier:MODe value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:IDentifier:MODe {EXTENDed|STandard}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:IDentifier:MODe?

Info

EXTENDed specifies the extended identifier mode.
STandard specifies the standard identifier mode.

SearchSearchItemTriggerABusCanIdentifierValue ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:IDentifier:VALue command.

Description

This command sets or queries CAN bus trigger identifier value. The search number is specified by x.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:IDentifier:VALue? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:IDentifier:VALue? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:IDentifier:VALue value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:IDentifier:VALue <string>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:IDentifier:VALue?

Info

<string> is the identifier value.

SearchSearchItemTriggerABusEthernet ¶

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet? query and raise an AssertionError if the returned value does not match value.

Properties

.condition: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:CONDition command.
.data: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:DATa command tree.
.ipheader: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:IPHeader command tree.
.mac: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC command tree.
.qtag: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:QTAG command tree.
.qualifier: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:QUALifier command.
.tcpheader: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader command tree.

condition `property` ¶

condition: SearchSearchItemTriggerABusEthernetCondition

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:CONDition command.

Description

This command specifies a field or condition within an Ethernet frame to search on.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:CONDition? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:CONDition? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:CONDition value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:CONDition {STARTFRAME|MACADDRess|MACTYPE|IPV4Header|TCPHeader|DATa|ENDPACKET|FCSError|QTAG|TCPDATA}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:CONDition?

Info

SFD - Start of frame delimiter.
MACADDRess - MAC addresses field.
MACLENgth - MAC length/type field.
IPHeader - IP header field. .
TCPHeader - TCP header field.
DATa - TCP/IPv4 or MAC protocol client data field.
EOP - End of Packet field.
IDLe - Idle field.
FCSError - Frame Check Sequence Error (CRC) field.
QTAG - IEEE 802.1Q (VLAN) control information field.

data `property` ¶

data: SearchSearchItemTriggerABusEthernetData

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:DATa command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:DATa? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:DATa? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.format: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:DATa:FORMat command.
.offset: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:DATa:OFFSet command.
.size: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:DATa:SIZe command.
.value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:DATa:VALue command.

ipheader `property` ¶

ipheader: SearchSearchItemTriggerABusEthernetIpheader

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:IPHeader command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:IPHeader? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:IPHeader? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.protocol: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:IPHeader:PROTOcol command tree.
.sourceaddr: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:IPHeader:SOUrceaddr command tree.

mac `property` ¶

mac: SearchSearchItemTriggerABusEthernetMac

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.address: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:ADDRess command tree.
.length: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:LENgth command tree.
.type: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:TYPe command tree.

qtag `property` ¶

qtag: SearchSearchItemTriggerABusEthernetQtag

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:QTAG command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:QTAG? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:QTAG? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.format: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:QTAG:FORMat command.
.value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:QTAG:VALue command.

qualifier `property` ¶

qualifier: SearchSearchItemTriggerABusEthernetQualifier

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:QUALifier command.

Description

This command specifies the qualifier to be used when the Ethernet search condition is set to MACLENgth or DATa. Normally, the Ethernet qualifier is set to ‘equal to’.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:QUALifier? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:QUALifier? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:QUALifier value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:QUALifier {LESSthan|MOREthan|EQual|UNEQual|LESSEQual|MOREEQual}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:QUALifier?

Info

LESSthan sets the qualifier to less than.
MOREthan sets the qualifier to greater than.
EQual sets the qualifier to equal.
UNEQual sets the qualifier to not equal.
LESSEQual sets the qualifier to less than or equal.
MOREEQual sets the qualifier to greater than or equal.

tcpheader `property` ¶

tcpheader: SearchSearchItemTriggerABusEthernetTcpheader

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.acknum: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:ACKnum command tree.
.seqnum: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:SEQnum command tree.
.sourceport: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:SOUrceport command tree.

SearchSearchItemTriggerABusEthernetCondition ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:CONDition command.

Description

This command specifies a field or condition within an Ethernet frame to search on.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:CONDition? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:CONDition? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:CONDition value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:CONDition {STARTFRAME|MACADDRess|MACTYPE|IPV4Header|TCPHeader|DATa|ENDPACKET|FCSError|QTAG|TCPDATA}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:CONDition?

Info

SFD - Start of frame delimiter.
MACADDRess - MAC addresses field.
MACLENgth - MAC length/type field.
IPHeader - IP header field. .
TCPHeader - TCP header field.
DATa - TCP/IPv4 or MAC protocol client data field.
EOP - End of Packet field.
IDLe - Idle field.
FCSError - Frame Check Sequence Error (CRC) field.
QTAG - IEEE 802.1Q (VLAN) control information field.

SearchSearchItemTriggerABusEthernetData ¶

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:DATa command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:DATa? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:DATa? query and raise an AssertionError if the returned value does not match value.

Properties

.format: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:DATa:FORMat command.
.offset: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:DATa:OFFSet command.
.size: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:DATa:SIZe command.
.value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:DATa:VALue command.

format `property` ¶

format: SearchSearchItemTriggerABusEthernetDataFormat

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:DATa:FORMat command.

Description

This command specifies the format (binary or hex) of the bit pattern to use when searching on the Ethernet data field. The search condition needs to be set to DATa.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:DATa:FORMat? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:DATa:FORMat? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:DATa:FORMat value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:DATa:FORMat {BINary|HEX}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:DATa:FORMat?

Info

BINary specifies the data format as binary.
HEX specifies the data format as hexadecimal.

offset `property` ¶

offset: SearchSearchItemTriggerABusEthernetDataOffset

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:DATa:OFFSet command.

Description

This command specifies the data offset value, in bytes, to use when searching on the Ethernet data field. The search condition needs to be set to DATa.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:DATa:OFFSet? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:DATa:OFFSet? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:DATa:OFFSet value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:DATa:OFFSet <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:DATa:OFFSet?

Info

<NR1> is an integer whose minimum and default values are -1 (don’t care) and maximum is 1,499.

size `property` ¶

size: SearchSearchItemTriggerABusEthernetDataSize

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:DATa:SIZe command.

Description

This command specifies the number of contiguous TCP/IPv4/MAC client bytes to use when searching on the Ethernet data field. The default is all X’s (don’t care). The search condition needs to be set to DATa.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:DATa:SIZe? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:DATa:SIZe? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:DATa:SIZe value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:DATa:SIZe <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:DATa:SIZe?

Info

<NR1> specifies the length of the data string, in bytes. The minimum and default values are 1, and the maximum value is 16.

value `property` ¶

value: SearchSearchItemTriggerABusEthernetDataValue

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:DATa:VALue command.

Description

This command specifies the binary value to use when searching on the Ethernet data field. The default is all X’s (don’t care). The search condition needs to be set to DATa.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:DATa:VALue? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:DATa:VALue? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:DATa:VALue value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:DATa:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:DATa:VALue?

Info

<QString> is a quoted string where the allowable characters are 0, 1, and X. The allowable number of characters depends on the setting for size (using SEARCH:SEARCHX:TRIGGER:A:BUS:ETHERNET:DATA:SIZE). The bits specified in the quoted string replace the least significant bits, leaving any unspecified upper bits unchanged.

SearchSearchItemTriggerABusEthernetDataFormat ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:DATa:FORMat command.

Description

This command specifies the format (binary or hex) of the bit pattern to use when searching on the Ethernet data field. The search condition needs to be set to DATa.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:DATa:FORMat? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:DATa:FORMat? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:DATa:FORMat value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:DATa:FORMat {BINary|HEX}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:DATa:FORMat?

Info

BINary specifies the data format as binary.
HEX specifies the data format as hexadecimal.

SearchSearchItemTriggerABusEthernetDataOffset ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:DATa:OFFSet command.

Description

This command specifies the data offset value, in bytes, to use when searching on the Ethernet data field. The search condition needs to be set to DATa.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:DATa:OFFSet? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:DATa:OFFSet? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:DATa:OFFSet value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:DATa:OFFSet <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:DATa:OFFSet?

Info

<NR1> is an integer whose minimum and default values are -1 (don’t care) and maximum is 1,499.

SearchSearchItemTriggerABusEthernetDataSize ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:DATa:SIZe command.

Description

This command specifies the number of contiguous TCP/IPv4/MAC client bytes to use when searching on the Ethernet data field. The default is all X’s (don’t care). The search condition needs to be set to DATa.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:DATa:SIZe? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:DATa:SIZe? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:DATa:SIZe value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:DATa:SIZe <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:DATa:SIZe?

Info

<NR1> specifies the length of the data string, in bytes. The minimum and default values are 1, and the maximum value is 16.

SearchSearchItemTriggerABusEthernetDataValue ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:DATa:VALue command.

Description

This command specifies the binary value to use when searching on the Ethernet data field. The default is all X’s (don’t care). The search condition needs to be set to DATa.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:DATa:VALue? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:DATa:VALue? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:DATa:VALue value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:DATa:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:DATa:VALue?

Info

<QString> is a quoted string where the allowable characters are 0, 1, and X. The allowable number of characters depends on the setting for size (using SEARCH:SEARCHX:TRIGGER:A:BUS:ETHERNET:DATA:SIZE). The bits specified in the quoted string replace the least significant bits, leaving any unspecified upper bits unchanged.

SearchSearchItemTriggerABusEthernetIpheader ¶

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:IPHeader command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:IPHeader? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:IPHeader? query and raise an AssertionError if the returned value does not match value.

Properties

.protocol: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:IPHeader:PROTOcol command tree.
.sourceaddr: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:IPHeader:SOUrceaddr command tree.

protocol `property` ¶

protocol: SearchSearchItemTriggerABusEthernetIpheaderProtocol

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:IPHeader:PROTOcol command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:IPHeader:PROTOcol? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:IPHeader:PROTOcol? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.format: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:IPHeader:PROTOcol:FORMat command.
.value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:IPHeader:PROTOcol:VALue command.

sourceaddr `property` ¶

sourceaddr: SearchSearchItemTriggerABusEthernetIpheaderSourceaddr

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:IPHeader:SOUrceaddr command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:IPHeader:SOUrceaddr? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:IPHeader:SOUrceaddr? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:IPHeader:SOUrceaddr:VALue command.

SearchSearchItemTriggerABusEthernetIpheaderProtocol ¶

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:IPHeader:PROTOcol command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:IPHeader:PROTOcol? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:IPHeader:PROTOcol? query and raise an AssertionError if the returned value does not match value.

Properties

.format: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:IPHeader:PROTOcol:FORMat command.
.value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:IPHeader:PROTOcol:VALue command.

format `property` ¶

format: SearchSearchItemTriggerABusEthernetIpheaderProtocolFormat

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:IPHeader:PROTOcol:FORMat command.

Description

This command specifies the data format (binary or hex) of the bit pattern to use when searching on the Ethernet IPv4 header protocol field. The search condition needs to be set to MACADDRess.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:IPHeader:PROTOcol:FORMat? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:IPHeader:PROTOcol:FORMat? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:IPHeader:PROTOcol:FORMat value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:IPHeader:PROTOcol:FORMat {BINary|HEX}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:IPHeader:PROTOcol:FORMat?

Info

BINary specifies the data format as binary.
HEX specifies the data format as hexadecimal.

value `property` ¶

value: SearchSearchItemTriggerABusEthernetIpheaderProtocolValue

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:IPHeader:PROTOcol:VALue command.

Description

This command specifies the 8-bit value to use when searching on the Ethernet IPv4 header protocol field. The default is all X’s (don’t care). The search condition needs to be set to IPHeader.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:IPHeader:PROTOcol:VALue? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:IPHeader:PROTOcol:VALue? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:IPHeader:PROTOcol:VALue value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:IPHeader:PROTOcol:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:IPHeader:PROTOcol:VALue?

Info

<QString> is a quoted string of up to 8 characters where the allowable characters are 0, 1, and X. The bits specified in the quoted string replace the least significant bits, leaving any unspecified upper bits unchanged.

SearchSearchItemTriggerABusEthernetIpheaderProtocolFormat ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:IPHeader:PROTOcol:FORMat command.

Description

This command specifies the data format (binary or hex) of the bit pattern to use when searching on the Ethernet IPv4 header protocol field. The search condition needs to be set to MACADDRess.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:IPHeader:PROTOcol:FORMat? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:IPHeader:PROTOcol:FORMat? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:IPHeader:PROTOcol:FORMat value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:IPHeader:PROTOcol:FORMat {BINary|HEX}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:IPHeader:PROTOcol:FORMat?

Info

BINary specifies the data format as binary.
HEX specifies the data format as hexadecimal.

SearchSearchItemTriggerABusEthernetIpheaderProtocolValue ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:IPHeader:PROTOcol:VALue command.

Description

This command specifies the 8-bit value to use when searching on the Ethernet IPv4 header protocol field. The default is all X’s (don’t care). The search condition needs to be set to IPHeader.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:IPHeader:PROTOcol:VALue? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:IPHeader:PROTOcol:VALue? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:IPHeader:PROTOcol:VALue value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:IPHeader:PROTOcol:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:IPHeader:PROTOcol:VALue?

Info

<QString> is a quoted string of up to 8 characters where the allowable characters are 0, 1, and X. The bits specified in the quoted string replace the least significant bits, leaving any unspecified upper bits unchanged.

SearchSearchItemTriggerABusEthernetIpheaderSourceaddr ¶

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:IPHeader:SOUrceaddr command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:IPHeader:SOUrceaddr? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:IPHeader:SOUrceaddr? query and raise an AssertionError if the returned value does not match value.

Properties

.value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:IPHeader:SOUrceaddr:VALue command.

value `property` ¶

value: SearchSearchItemTriggerABusEthernetIpheaderSourceaddrValue

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:IPHeader:SOUrceaddr:VALue command.

Description

This command specifies the 32-bit value to use when searching on the Ethernet IPv4 header address source field. The default is all X’s (don’t care). The search condition needs to be set to IPHeader.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:IPHeader:SOUrceaddr:VALue? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:IPHeader:SOUrceaddr:VALue? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:IPHeader:SOUrceaddr:VALue value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:IPHeader:SOUrceaddr:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:IPHeader:SOUrceaddr:VALue?

Info

<QString> is a quoted string of up to 32 characters where the allowable characters are 0, 1, and X. The bits specified in the quoted string replace the least significant bits, leaving any unspecified upper bits unchanged.

SearchSearchItemTriggerABusEthernetIpheaderSourceaddrValue ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:IPHeader:SOUrceaddr:VALue command.

Description

This command specifies the 32-bit value to use when searching on the Ethernet IPv4 header address source field. The default is all X’s (don’t care). The search condition needs to be set to IPHeader.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:IPHeader:SOUrceaddr:VALue? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:IPHeader:SOUrceaddr:VALue? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:IPHeader:SOUrceaddr:VALue value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:IPHeader:SOUrceaddr:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:IPHeader:SOUrceaddr:VALue?

Info

<QString> is a quoted string of up to 32 characters where the allowable characters are 0, 1, and X. The bits specified in the quoted string replace the least significant bits, leaving any unspecified upper bits unchanged.

SearchSearchItemTriggerABusEthernetMac ¶

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC? query and raise an AssertionError if the returned value does not match value.

Properties

.address: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:ADDRess command tree.
.length: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:LENgth command tree.
.type: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:TYPe command tree.

address `property` ¶

address: SearchSearchItemTriggerABusEthernetMacAddress

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:ADDRess command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:ADDRess? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:ADDRess? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.source: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:ADDRess:SOUrce command tree.

length `property` ¶

length: SearchSearchItemTriggerABusEthernetMacLength

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:LENgth command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:LENgth? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:LENgth? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.format: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:LENgth:FORMat command.
.value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:LENgth:VALue command.

type `property` ¶

type: SearchSearchItemTriggerABusEthernetMacType

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:TYPe command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:TYPe? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:TYPe? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.format: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:TYPe:FORMat command.
.value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:TYPe:VALue command.

SearchSearchItemTriggerABusEthernetMacAddress ¶

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:ADDRess command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:ADDRess? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:ADDRess? query and raise an AssertionError if the returned value does not match value.

Properties

.source: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:ADDRess:SOUrce command tree.

source `property` ¶

source: SearchSearchItemTriggerABusEthernetMacAddressSource

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:ADDRess:SOUrce command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:ADDRess:SOUrce? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:ADDRess:SOUrce? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.format: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:ADDRess:SOUrce:FORMat command.
.value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:ADDRess:SOUrce:VALue command.

SearchSearchItemTriggerABusEthernetMacAddressSource ¶

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:ADDRess:SOUrce command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:ADDRess:SOUrce? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:ADDRess:SOUrce? query and raise an AssertionError if the returned value does not match value.

Properties

.format: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:ADDRess:SOUrce:FORMat command.
.value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:ADDRess:SOUrce:VALue command.

format `property` ¶

format: SearchSearchItemTriggerABusEthernetMacAddressSourceFormat

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:ADDRess:SOUrce:FORMat command.

Description

This command specifies the format (binary or hex) of the bit pattern to use when searching on the Ethernet MAC address source field. The search condition needs to be set to MACADDRess.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:ADDRess:SOUrce:FORMat? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:ADDRess:SOUrce:FORMat? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:ADDRess:SOUrce:FORMat value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:ADDRess:SOUrce:FORMat {BINary|HEX}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:ADDRess:SOUrce:FORMat?

Info

BINary specifies the data format as binary.
HEX specifies the data format as hexadecimal.

value `property` ¶

value: SearchSearchItemTriggerABusEthernetMacAddressSourceValue

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:ADDRess:SOUrce:VALue command.

Description

This command specifies the 48-bit value to use when searching on the Ethernet MAC address source field. The default is all X’s (don’t care). The search condition needs to be set to MACADDRess.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:ADDRess:SOUrce:VALue? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:ADDRess:SOUrce:VALue? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:ADDRess:SOUrce:VALue value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:ADDRess:SOUrce:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:ADDRess:SOUrce:VALue?

Info

<QString> is a quoted string of up to 48 characters where the allowable characters are 0, 1, and X. The bits specified in the quoted string replace the least significant bits, leaving any unspecified upper bits unchanged.

SearchSearchItemTriggerABusEthernetMacAddressSourceFormat ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:ADDRess:SOUrce:FORMat command.

Description

This command specifies the format (binary or hex) of the bit pattern to use when searching on the Ethernet MAC address source field. The search condition needs to be set to MACADDRess.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:ADDRess:SOUrce:FORMat? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:ADDRess:SOUrce:FORMat? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:ADDRess:SOUrce:FORMat value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:ADDRess:SOUrce:FORMat {BINary|HEX}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:ADDRess:SOUrce:FORMat?

Info

BINary specifies the data format as binary.
HEX specifies the data format as hexadecimal.

SearchSearchItemTriggerABusEthernetMacAddressSourceValue ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:ADDRess:SOUrce:VALue command.

Description

This command specifies the 48-bit value to use when searching on the Ethernet MAC address source field. The default is all X’s (don’t care). The search condition needs to be set to MACADDRess.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:ADDRess:SOUrce:VALue? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:ADDRess:SOUrce:VALue? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:ADDRess:SOUrce:VALue value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:ADDRess:SOUrce:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:ADDRess:SOUrce:VALue?

Info

<QString> is a quoted string of up to 48 characters where the allowable characters are 0, 1, and X. The bits specified in the quoted string replace the least significant bits, leaving any unspecified upper bits unchanged.

SearchSearchItemTriggerABusEthernetMacLength ¶

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:LENgth command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:LENgth? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:LENgth? query and raise an AssertionError if the returned value does not match value.

Properties

.format: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:LENgth:FORMat command.
.value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:LENgth:VALue command.

format `property` ¶

format: SearchSearchItemTriggerABusEthernetMacLengthFormat

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:LENgth:FORMat command.

Description

This command specifies the format (binary or hex) of the bit pattern to use when searching on the Ethernet MAC length or type. The search condition needs to be set to MACADDRess.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:LENgth:FORMat? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:LENgth:FORMat? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:LENgth:FORMat value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:LENgth:FORMat {BINary|HEX}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:LENgth:FORMat?

Info

BINary specifies the data format as binary.
HEX specifies the data format as hexadecimal.

value `property` ¶

value: SearchSearchItemTriggerABusEthernetMacLengthValue

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:LENgth:VALue command.

Description

This command specifies the 16-bit value to use when searching on the Ethernet MAC length/type. The default is all X’s (don’t care). The search condition needs to be set to MACADDRess.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:LENgth:VALue? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:LENgth:VALue? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:LENgth:VALue value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:LENgth:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:LENgth:VALue?

SearchSearchItemTriggerABusEthernetMacLengthFormat ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:LENgth:FORMat command.

Description

This command specifies the format (binary or hex) of the bit pattern to use when searching on the Ethernet MAC length or type. The search condition needs to be set to MACADDRess.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:LENgth:FORMat? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:LENgth:FORMat? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:LENgth:FORMat value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:LENgth:FORMat {BINary|HEX}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:LENgth:FORMat?

Info

BINary specifies the data format as binary.
HEX specifies the data format as hexadecimal.

SearchSearchItemTriggerABusEthernetMacLengthValue ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:LENgth:VALue command.

Description

This command specifies the 16-bit value to use when searching on the Ethernet MAC length/type. The default is all X’s (don’t care). The search condition needs to be set to MACADDRess.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:LENgth:VALue? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:LENgth:VALue? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:LENgth:VALue value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:LENgth:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:LENgth:VALue?

SearchSearchItemTriggerABusEthernetMacType ¶

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:TYPe command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:TYPe? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:TYPe? query and raise an AssertionError if the returned value does not match value.

Properties

.format: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:TYPe:FORMat command.
.value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:TYPe:VALue command.

format `property` ¶

format: SearchSearchItemTriggerABusEthernetMacTypeFormat

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:TYPe:FORMat command.

Description

This command specifies the format (binary or hex) of the bit pattern to use when searching on the Ethernet MAC length or type. The search condition needs to be set to MACADDRess.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:TYPe:FORMat? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:TYPe:FORMat? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:TYPe:FORMat value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:TYPe:FORMat {BINary|HEX}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:TYPe:FORMat?

Info

BINary specifies the data format as binary.
HEX specifies the data format as hexadecimal.

value `property` ¶

value: SearchSearchItemTriggerABusEthernetMacTypeValue

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:TYPe:VALue command.

Description

This command specifies the 16-bit value to use when searching on the Ethernet MAC length/type. The default is all X’s (don’t care). The search condition needs to be set to MACADDRess.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:TYPe:VALue? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:TYPe:VALue? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:TYPe:VALue value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:TYPe:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:TYPe:VALue?

SearchSearchItemTriggerABusEthernetMacTypeFormat ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:TYPe:FORMat command.

Description

This command specifies the format (binary or hex) of the bit pattern to use when searching on the Ethernet MAC length or type. The search condition needs to be set to MACADDRess.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:TYPe:FORMat? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:TYPe:FORMat? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:TYPe:FORMat value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:TYPe:FORMat {BINary|HEX}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:TYPe:FORMat?

Info

BINary specifies the data format as binary.
HEX specifies the data format as hexadecimal.

SearchSearchItemTriggerABusEthernetMacTypeValue ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:TYPe:VALue command.

Description

This command specifies the 16-bit value to use when searching on the Ethernet MAC length/type. The default is all X’s (don’t care). The search condition needs to be set to MACADDRess.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:TYPe:VALue? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:TYPe:VALue? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:TYPe:VALue value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:TYPe:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:MAC:TYPe:VALue?

SearchSearchItemTriggerABusEthernetQtag ¶

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:QTAG command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:QTAG? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:QTAG? query and raise an AssertionError if the returned value does not match value.

Properties

.format: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:QTAG:FORMat command.
.value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:QTAG:VALue command.

format `property` ¶

format: SearchSearchItemTriggerABusEthernetQtagFormat

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:QTAG:FORMat command.

Description

This command specifies the data format (binary or hex) to use when searching on the Q-Tag field. The search condition needs to be set to QTAG.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:QTAG:FORMat? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:QTAG:FORMat? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:QTAG:FORMat value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:QTAG:FORMat {BINary|HEX}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:QTAG:FORMat?

Info

BINary specifies the data format as binary.
HEX specifies the data format as hexadecimal.

value `property` ¶

value: SearchSearchItemTriggerABusEthernetQtagValue

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:QTAG:VALue command.

Description

This command specifies the 32-bit value to use when searching on the Ethernet Q-Tag field. The default is all X’s (don’t care). The search condition needs to be set to QTAG.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:QTAG:VALue? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:QTAG:VALue? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:QTAG:VALue value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:QTAG:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:QTAG:VALue?

Info

<QString> is a quoted string of up to 32 characters where the allowable characters are 0, 1, and X. The bits specified in the quoted string replace the least significant bits, leaving any unspecified upper bits unchanged.

SearchSearchItemTriggerABusEthernetQtagFormat ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:QTAG:FORMat command.

Description

This command specifies the data format (binary or hex) to use when searching on the Q-Tag field. The search condition needs to be set to QTAG.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:QTAG:FORMat? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:QTAG:FORMat? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:QTAG:FORMat value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:QTAG:FORMat {BINary|HEX}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:QTAG:FORMat?

Info

BINary specifies the data format as binary.
HEX specifies the data format as hexadecimal.

SearchSearchItemTriggerABusEthernetQtagValue ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:QTAG:VALue command.

Description

This command specifies the 32-bit value to use when searching on the Ethernet Q-Tag field. The default is all X’s (don’t care). The search condition needs to be set to QTAG.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:QTAG:VALue? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:QTAG:VALue? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:QTAG:VALue value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:QTAG:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:QTAG:VALue?

Info

<QString> is a quoted string of up to 32 characters where the allowable characters are 0, 1, and X. The bits specified in the quoted string replace the least significant bits, leaving any unspecified upper bits unchanged.

SearchSearchItemTriggerABusEthernetQualifier ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:QUALifier command.

Description

This command specifies the qualifier to be used when the Ethernet search condition is set to MACLENgth or DATa. Normally, the Ethernet qualifier is set to ‘equal to’.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:QUALifier? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:QUALifier? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:QUALifier value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:QUALifier {LESSthan|MOREthan|EQual|UNEQual|LESSEQual|MOREEQual}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:QUALifier?

Info

LESSthan sets the qualifier to less than.
MOREthan sets the qualifier to greater than.
EQual sets the qualifier to equal.
UNEQual sets the qualifier to not equal.
LESSEQual sets the qualifier to less than or equal.
MOREEQual sets the qualifier to greater than or equal.

SearchSearchItemTriggerABusEthernetTcpheader ¶

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader? query and raise an AssertionError if the returned value does not match value.

Properties

.acknum: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:ACKnum command tree.
.seqnum: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:SEQnum command tree.
.sourceport: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:SOUrceport command tree.

acknum `property` ¶

acknum: SearchSearchItemTriggerABusEthernetTcpheaderAcknum

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:ACKnum command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:ACKnum? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:ACKnum? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.format: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:ACKnum:FORMat command.
.value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:ACKnum:VALue command.

seqnum `property` ¶

seqnum: SearchSearchItemTriggerABusEthernetTcpheaderSeqnum

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:SEQnum command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:SEQnum? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:SEQnum? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.format: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:SEQnum:FORMat command.
.value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:SEQnum:VALue command.

sourceport `property` ¶

sourceport: SearchSearchItemTriggerABusEthernetTcpheaderSourceport

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:SOUrceport command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:SOUrceport? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:SOUrceport? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.format: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:SOUrceport:FORMat command.
.value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:SOUrceport:VALue command.

SearchSearchItemTriggerABusEthernetTcpheaderAcknum ¶

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:ACKnum command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:ACKnum? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:ACKnum? query and raise an AssertionError if the returned value does not match value.

Properties

.format: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:ACKnum:FORMat command.
.value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:ACKnum:VALue command.

format `property` ¶

format: SearchSearchItemTriggerABusEthernetTcpheaderAcknumFormat

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:ACKnum:FORMat command.

Description

This command specifies the format (binary or hex) of the bit pattern to use when searching on the Ethernet TCP header acknowledgement number. The search condition needs to be set to TCPHeader.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:ACKnum:FORMat? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:ACKnum:FORMat? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:ACKnum:FORMat value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:ACKnum:FORMat {BINary|HEX|DECImal}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:ACKnum:FORMat?

Info

BINary specifies the data format as binary.
HEX specifies the data format as hexadecimal.
DECImal specifies the data format as decimal.

value `property` ¶

value: SearchSearchItemTriggerABusEthernetTcpheaderAcknumValue

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:ACKnum:VALue command.

Description

This command specifies the 32-bit value to use when searching on the Ethernet TCP header acknowledgement number. The default is all X’s (don’t care). The search condition needs to be set to TCPHeader.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:ACKnum:VALue? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:ACKnum:VALue? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:ACKnum:VALue value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:ACKnum:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:ACKnum:VALue?

Info

<QString> is a quoted string of up to 32 characters where the allowable characters are 0, 1, and X. The bits specified in the quoted string replace the least significant bits, leaving any unspecified upper bits unchanged.

SearchSearchItemTriggerABusEthernetTcpheaderAcknumFormat ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:ACKnum:FORMat command.

Description

This command specifies the format (binary or hex) of the bit pattern to use when searching on the Ethernet TCP header acknowledgement number. The search condition needs to be set to TCPHeader.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:ACKnum:FORMat? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:ACKnum:FORMat? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:ACKnum:FORMat value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:ACKnum:FORMat {BINary|HEX|DECImal}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:ACKnum:FORMat?

Info

BINary specifies the data format as binary.
HEX specifies the data format as hexadecimal.
DECImal specifies the data format as decimal.

SearchSearchItemTriggerABusEthernetTcpheaderAcknumValue ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:ACKnum:VALue command.

Description

This command specifies the 32-bit value to use when searching on the Ethernet TCP header acknowledgement number. The default is all X’s (don’t care). The search condition needs to be set to TCPHeader.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:ACKnum:VALue? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:ACKnum:VALue? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:ACKnum:VALue value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:ACKnum:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:ACKnum:VALue?

Info

<QString> is a quoted string of up to 32 characters where the allowable characters are 0, 1, and X. The bits specified in the quoted string replace the least significant bits, leaving any unspecified upper bits unchanged.

SearchSearchItemTriggerABusEthernetTcpheaderSeqnum ¶

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:SEQnum command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:SEQnum? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:SEQnum? query and raise an AssertionError if the returned value does not match value.

Properties

.format: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:SEQnum:FORMat command.
.value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:SEQnum:VALue command.

format `property` ¶

format: SearchSearchItemTriggerABusEthernetTcpheaderSeqnumFormat

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:SEQnum:FORMat command.

Description

This command specifies the format (binary or hex) of the bit pattern to use when searching on the Ethernet TCP header sequence number. The search condition needs to be set to TCPHeader.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:SEQnum:FORMat? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:SEQnum:FORMat? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:SEQnum:FORMat value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:SEQnum:FORMat {BINary|HEX|DECImal}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:SEQnum:FORMat?

Info

BINary specifies the data format as binary.
HEX specifies the data format as hexadecimal.
DECImal specifies the data format as decimal.

value `property` ¶

value: SearchSearchItemTriggerABusEthernetTcpheaderSeqnumValue

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:SEQnum:VALue command.

Description

This command specifies the 32-bit value to use when searching on the Ethernet TCP header sequence number. The default is all X’s (don’t care). The search condition needs to be set to TCPHeader.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:SEQnum:VALue? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:SEQnum:VALue? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:SEQnum:VALue value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:SEQnum:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:SEQnum:VALue?

Info

<QString> is a quoted string of up to 32 characters where the allowable characters are 0, 1, and X. The bits specified in the quoted string replace the least significant bits, leaving any unspecified upper bits unchanged.

SearchSearchItemTriggerABusEthernetTcpheaderSeqnumFormat ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:SEQnum:FORMat command.

Description

This command specifies the format (binary or hex) of the bit pattern to use when searching on the Ethernet TCP header sequence number. The search condition needs to be set to TCPHeader.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:SEQnum:FORMat? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:SEQnum:FORMat? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:SEQnum:FORMat value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:SEQnum:FORMat {BINary|HEX|DECImal}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:SEQnum:FORMat?

Info

BINary specifies the data format as binary.
HEX specifies the data format as hexadecimal.
DECImal specifies the data format as decimal.

SearchSearchItemTriggerABusEthernetTcpheaderSeqnumValue ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:SEQnum:VALue command.

Description

This command specifies the 32-bit value to use when searching on the Ethernet TCP header sequence number. The default is all X’s (don’t care). The search condition needs to be set to TCPHeader.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:SEQnum:VALue? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:SEQnum:VALue? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:SEQnum:VALue value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:SEQnum:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:SEQnum:VALue?

Info

<QString> is a quoted string of up to 32 characters where the allowable characters are 0, 1, and X. The bits specified in the quoted string replace the least significant bits, leaving any unspecified upper bits unchanged.

SearchSearchItemTriggerABusEthernetTcpheaderSourceport ¶

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:SOUrceport command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:SOUrceport? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:SOUrceport? query and raise an AssertionError if the returned value does not match value.

Properties

.format: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:SOUrceport:FORMat command.
.value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:SOUrceport:VALue command.

format `property` ¶

format: SearchSearchItemTriggerABusEthernetTcpheaderSourceportFormat

SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:SOUrceport:FORMat command.

Description

This command specifies the format (binary or hex) of the bit pattern to use when searching on the Ethernet TCP header source port number. The search condition needs to be set to TCPHeader.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:SOUrceport:FORMat? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:SOUrceport:FORMat? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:SOUrceport:FORMat value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:SOUrceport:FORMat {BINary|HEX|DECImal}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:SOUrceport:FORMat?

Info

BINary specifies the data format as binary.
HEX specifies the data format as hexadecimal.
DECImal specifies the data format as decimal.

value `property` ¶

value: SearchSearchItemTriggerABusEthernetTcpheaderSourceportValue

SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:SOUrceport:VALue command.

Description

This command specifies the 16-bit value to use when searching on the Ethernet TCP header source port number. The default is all X’s (don’t care). The search condition needs to be set to TCPHeader.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:SOUrceport:VALue? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:SOUrceport:VALue? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:SOUrceport:VALue value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:SOUrceport:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:SOUrceport:VALue?

Info

<QString> is a quoted string of up to 16 characters where the allowable characters are 0, 1, and X. The bits specified in the quoted string replace the least significant bits, leaving any unspecified upper bits unchanged.

SearchSearchItemTriggerABusEthernetTcpheaderSourceportFormat ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:SOUrceport:FORMat command.

Description

This command specifies the format (binary or hex) of the bit pattern to use when searching on the Ethernet TCP header source port number. The search condition needs to be set to TCPHeader.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:SOUrceport:FORMat? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:SOUrceport:FORMat? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:SOUrceport:FORMat value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:SOUrceport:FORMat {BINary|HEX|DECImal}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:SOUrceport:FORMat?

Info

BINary specifies the data format as binary.
HEX specifies the data format as hexadecimal.
DECImal specifies the data format as decimal.

SearchSearchItemTriggerABusEthernetTcpheaderSourceportValue ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:SOUrceport:VALue command.

Description

This command specifies the 16-bit value to use when searching on the Ethernet TCP header source port number. The default is all X’s (don’t care). The search condition needs to be set to TCPHeader.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:SOUrceport:VALue? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:SOUrceport:VALue? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:SOUrceport:VALue value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:SOUrceport:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:ETHERnet:TCPHeader:SOUrceport:VALue?

Info

<QString> is a quoted string of up to 16 characters where the allowable characters are 0, 1, and X. The bits specified in the quoted string replace the least significant bits, leaving any unspecified upper bits unchanged.

SearchSearchItemTriggerABusFlexray ¶

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY? query and raise an AssertionError if the returned value does not match value.

Properties

.condition: The SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:CONDition command.
.cyclecount: The SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:CYCLEcount command tree.
.data: The SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:DATa command tree.
.eoftype: The SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:EOFTYPE command.
.errtype: The SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:ERRTYPE command.
.frametype: The SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:FRAMEType command.
.header: The SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:HEADER command tree.
.identifier: The SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:IDentifier command tree.

condition `property` ¶

condition: SearchSearchItemTriggerABusFlexrayCondition

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:CONDition command.

Description

This command sets or queries FLEXRAY bus search trigger condition. The search number is specified by x.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:CONDition? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:CONDition? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:CONDition value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:CONDition {SOF|FRAMEtype|IDentifier|CYCLEcount|HEADer|DATA|IDANDDATA|EOF|ERRor}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:CONDition?

Info

SOF sets the trigger condition to start of frame.
FRAMEType sets the trigger condition to frame type.
IDentifier sets the trigger condition to identifier.
CYCLEcount sets the trigger condition to cycle count.
HEADer sets the trigger condition to header.
DATA sets the trigger condition to data.
IDANDDATA sets the trigger condition to ID and data.
EOF sets the trigger condition to end of frame.
ERRor sets the trigger condition to error.

cyclecount `property` ¶

cyclecount: SearchSearchItemTriggerABusFlexrayCyclecount

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:CYCLEcount command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:CYCLEcount? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:CYCLEcount? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.format: The SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:CYCLEcount:FORMat command.
.qualifier: The SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:CYCLEcount:QUALifier command.
.value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:CYCLEcount:VALue command.

data `property` ¶

data: SearchSearchItemTriggerABusFlexrayData

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:DATa command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:DATa? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:DATa? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.format: The SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:DATa:FORMat command.
.offset: The SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:DATa:OFFSet command.
.qualifier: The SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:DATa:QUALifier command.
.size: The SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:DATa:SIZe command.
.value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:DATa:VALue command.

eoftype `property` ¶

eoftype: SearchSearchItemTriggerABusFlexrayEoftype

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:EOFTYPE command.

Description

This command sets or queries the FLEXRAY bus search trigger end of file type. The search number is specified by x.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:EOFTYPE? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:EOFTYPE? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:EOFTYPE value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:EOFTYPE {ALL|STATIC|DYNAMIC}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:EOFTYPE?

Info

ALL specifies either end of file type.
STATIC specifies the static end of file type.
DYNAMIC specifies the static end of file type.

errtype `property` ¶

errtype: SearchSearchItemTriggerABusFlexrayErrtype

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:ERRTYPE command.

Description

This command sets or queries the FLEXRAY bus search trigger error type. The search number is specified by x.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:ERRTYPE? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:ERRTYPE? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:ERRTYPE value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:ERRTYPE {CRCHEADer|CRCTRAILer|NULLFRSTATIC|NULLFRDYNAMIC|SYNCFRAME|STARTUPNOSYNC}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:ERRTYPE?

Info

CRCHeader sets the error type to CRCHeader.
CRCTrailer sets the error type to CRCTrailer.
NULLFRStatic sets the error type to NULLFRStatic.
NULLFRDynamic sets the error type to NULLFRDynamic.
SYNCFrame sets the error type to SYNCFrame.
STARTupnosync sets the error type to STARTupnosync.

frametype `property` ¶

frametype: SearchSearchItemTriggerABusFlexrayFrametype

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:FRAMEType command.

Description

This command sets or queries the FLEXRAY bus search trigger frame type. The search number is specified by x.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:FRAMEType? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:FRAMEType? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:FRAMEType value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:FRAMEType {NORMal|PAYload|NULL|SYNC|STARTup}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:FRAMEType?

Info

NORMal sets the frame type to normal.
PAYload sets the frame type to payload.
NULL sets the frame type to null.
SYNC sets the frame type to sync.
STARTup sets the frame type to startup.

header `property` ¶

header: SearchSearchItemTriggerABusFlexrayHeader

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:HEADER command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:HEADER? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:HEADER? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.crc: The SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:HEADER:CRC command.
.cyclecount: The SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:HEADER:CYCLECount command.
.frameid: The SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:HEADER:FRAMEID command.
.indbits: The SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:HEADER:INDBits command.
.paylength: The SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:HEADER:PAYLENgth command.

identifier `property` ¶

identifier: SearchSearchItemTriggerABusFlexrayIdentifier

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:IDentifier command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:IDentifier? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:IDentifier? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.format: The SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:IDentifier:FORMat command.
.qualifier: The SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:IDentifier:QUALifier command.
.value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:IDentifier:VALue command.

SearchSearchItemTriggerABusFlexrayCondition ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:CONDition command.

Description

This command sets or queries FLEXRAY bus search trigger condition. The search number is specified by x.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:CONDition? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:CONDition? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:CONDition value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:CONDition {SOF|FRAMEtype|IDentifier|CYCLEcount|HEADer|DATA|IDANDDATA|EOF|ERRor}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:CONDition?

Info

SOF sets the trigger condition to start of frame.
FRAMEType sets the trigger condition to frame type.
IDentifier sets the trigger condition to identifier.
CYCLEcount sets the trigger condition to cycle count.
HEADer sets the trigger condition to header.
DATA sets the trigger condition to data.
IDANDDATA sets the trigger condition to ID and data.
EOF sets the trigger condition to end of frame.
ERRor sets the trigger condition to error.

SearchSearchItemTriggerABusFlexrayCyclecount ¶

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:CYCLEcount command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:CYCLEcount? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:CYCLEcount? query and raise an AssertionError if the returned value does not match value.

Properties

.format: The SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:CYCLEcount:FORMat command.
.qualifier: The SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:CYCLEcount:QUALifier command.
.value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:CYCLEcount:VALue command.

format `property` ¶

format: SearchSearchItemTriggerABusFlexrayCyclecountFormat

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:CYCLEcount:FORMat command.

Description

This command sets or queries the FLEXRAY bus search cycle count format. The search number is specified by x.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:CYCLEcount:FORMat? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:CYCLEcount:FORMat? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:CYCLEcount:FORMat value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:CYCLEcount:FORMat {BINary|HEX}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:CYCLEcount:FORMat?

Info

BINary specifies the data format as binary.
HEX specifies the data format as hexadecimal.

qualifier `property` ¶

qualifier: SearchSearchItemTriggerABusFlexrayCyclecountQualifier

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:CYCLEcount:QUALifier command.

Description

This command sets or queries the FLEXRAY bus search trigger cycle count qualifier. The search number is specified by x.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:CYCLEcount:QUALifier? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:CYCLEcount:QUALifier? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:CYCLEcount:QUALifier value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:CYCLEcount:QUALifier {EQUal|LESSEQual|MOREEQual|UNEQual|LESSthan|MOREthan}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:CYCLEcount:QUALifier?

Info

EQUal specifies the qualifier as equal.
LESSEQual specifies the qualifier as less equal.
MOREEQual specifies the qualifier as more equal.
UNEQual specifies the qualifier as unequal.
LESSthan specifies the qualifier as less than.
MOREthan specifies the qualifier as more than.

value `property` ¶

value: SearchSearchItemTriggerABusFlexrayCyclecountValue

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:CYCLEcount:VALue command.

Description

This command sets or queries the FLEXRAY bus search cycle count value. The search number is specified by x.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:CYCLEcount:VALue? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:CYCLEcount:VALue? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:CYCLEcount:VALue value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:CYCLEcount:VALue <string>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:CYCLEcount:VALue?

Info

<string> specifies the cycle count value.

SearchSearchItemTriggerABusFlexrayCyclecountFormat ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:CYCLEcount:FORMat command.

Description

This command sets or queries the FLEXRAY bus search cycle count format. The search number is specified by x.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:CYCLEcount:FORMat? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:CYCLEcount:FORMat? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:CYCLEcount:FORMat value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:CYCLEcount:FORMat {BINary|HEX}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:CYCLEcount:FORMat?

Info

BINary specifies the data format as binary.
HEX specifies the data format as hexadecimal.

SearchSearchItemTriggerABusFlexrayCyclecountQualifier ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:CYCLEcount:QUALifier command.

Description

This command sets or queries the FLEXRAY bus search trigger cycle count qualifier. The search number is specified by x.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:CYCLEcount:QUALifier? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:CYCLEcount:QUALifier? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:CYCLEcount:QUALifier value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:CYCLEcount:QUALifier {EQUal|LESSEQual|MOREEQual|UNEQual|LESSthan|MOREthan}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:CYCLEcount:QUALifier?

Info

EQUal specifies the qualifier as equal.
LESSEQual specifies the qualifier as less equal.
MOREEQual specifies the qualifier as more equal.
UNEQual specifies the qualifier as unequal.
LESSthan specifies the qualifier as less than.
MOREthan specifies the qualifier as more than.

SearchSearchItemTriggerABusFlexrayCyclecountValue ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:CYCLEcount:VALue command.

Description

This command sets or queries the FLEXRAY bus search cycle count value. The search number is specified by x.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:CYCLEcount:VALue? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:CYCLEcount:VALue? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:CYCLEcount:VALue value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:CYCLEcount:VALue <string>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:CYCLEcount:VALue?

Info

<string> specifies the cycle count value.

SearchSearchItemTriggerABusFlexrayData ¶

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:DATa command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:DATa? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:DATa? query and raise an AssertionError if the returned value does not match value.

Properties

.format: The SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:DATa:FORMat command.
.offset: The SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:DATa:OFFSet command.
.qualifier: The SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:DATa:QUALifier command.
.size: The SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:DATa:SIZe command.
.value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:DATa:VALue command.

format `property` ¶

format: SearchSearchItemTriggerABusFlexrayDataFormat

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:DATa:FORMat command.

Description

This command sets or queries FLEXRAY bus search data format. The search number is specified by x.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:DATa:FORMat? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:DATa:FORMat? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:DATa:FORMat value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:DATa:FORMat {BINary|HEX}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:DATa:FORMat?

Info

BINary specifies the data format as binary.
HEX specifies the data format as hexadecimal.

offset `property` ¶

offset: SearchSearchItemTriggerABusFlexrayDataOffset

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:DATa:OFFSet command.

Description

This command sets or queries the FLEXRAY bus search trigger data offset. The search number is specified by x.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:DATa:OFFSet? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:DATa:OFFSet? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:DATa:OFFSet value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:DATa:OFFSet <nr3>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:DATa:OFFSet?

Info

<nr3> specifies the data offset in bytes. A setting of X/Don’t care is accomplished by setting the offset to -1.

qualifier `property` ¶

qualifier: SearchSearchItemTriggerABusFlexrayDataQualifier

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:DATa:QUALifier command.

Description

This command sets or queries the FLEXRAY bus search trigger data qualifier. The search number is specified by x.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:DATa:QUALifier? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:DATa:QUALifier? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:DATa:QUALifier value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:DATa:QUALifier {EQUal|LESSEQual|MOREEQual|UNEQual|LESSthan|MOREthan}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:DATa:QUALifier?

Info

EQUal specifies the qualifier as equal.
LESSEQual specifies the qualifier as less equal.
MOREEQual specifies the qualifier as more equal.
UNEQual specifies the qualifier as unequal.
LESSthan specifies the qualifier as less than.
MOREthan specifies the qualifier as more than.

size `property` ¶

size: SearchSearchItemTriggerABusFlexrayDataSize

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:DATa:SIZe command.

Description

This command sets or queries the FLEXRAY bus search trigger data size in bytes. The search number is specified by x.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:DATa:SIZe? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:DATa:SIZe? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:DATa:SIZe value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:DATa:SIZe <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:DATa:SIZe?

Info

<NR3> specifies the data size in bytes. A data size of -1 is don’t care.

value `property` ¶

value: SearchSearchItemTriggerABusFlexrayDataValue

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:DATa:VALue command.

Description

This command sets or queries the FLEXRAY bus search trigger data value. The search number is specified by x.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:DATa:VALue? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:DATa:VALue? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:DATa:VALue value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:DATa:VALue <STRING>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:DATa:VALue?

Info

<STRING> specifies the data value.

SearchSearchItemTriggerABusFlexrayDataFormat ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:DATa:FORMat command.

Description

This command sets or queries FLEXRAY bus search data format. The search number is specified by x.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:DATa:FORMat? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:DATa:FORMat? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:DATa:FORMat value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:DATa:FORMat {BINary|HEX}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:DATa:FORMat?

Info

BINary specifies the data format as binary.
HEX specifies the data format as hexadecimal.

SearchSearchItemTriggerABusFlexrayDataOffset ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:DATa:OFFSet command.

Description

This command sets or queries the FLEXRAY bus search trigger data offset. The search number is specified by x.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:DATa:OFFSet? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:DATa:OFFSet? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:DATa:OFFSet value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:DATa:OFFSet <nr3>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:DATa:OFFSet?

Info

<nr3> specifies the data offset in bytes. A setting of X/Don’t care is accomplished by setting the offset to -1.

SearchSearchItemTriggerABusFlexrayDataQualifier ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:DATa:QUALifier command.

Description

This command sets or queries the FLEXRAY bus search trigger data qualifier. The search number is specified by x.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:DATa:QUALifier? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:DATa:QUALifier? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:DATa:QUALifier value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:DATa:QUALifier {EQUal|LESSEQual|MOREEQual|UNEQual|LESSthan|MOREthan}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:DATa:QUALifier?

Info

EQUal specifies the qualifier as equal.
LESSEQual specifies the qualifier as less equal.
MOREEQual specifies the qualifier as more equal.
UNEQual specifies the qualifier as unequal.
LESSthan specifies the qualifier as less than.
MOREthan specifies the qualifier as more than.

SearchSearchItemTriggerABusFlexrayDataSize ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:DATa:SIZe command.

Description

This command sets or queries the FLEXRAY bus search trigger data size in bytes. The search number is specified by x.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:DATa:SIZe? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:DATa:SIZe? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:DATa:SIZe value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:DATa:SIZe <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:DATa:SIZe?

Info

<NR3> specifies the data size in bytes. A data size of -1 is don’t care.

SearchSearchItemTriggerABusFlexrayDataValue ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:DATa:VALue command.

Description

This command sets or queries the FLEXRAY bus search trigger data value. The search number is specified by x.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:DATa:VALue? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:DATa:VALue? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:DATa:VALue value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:DATa:VALue <STRING>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:DATa:VALue?

Info

<STRING> specifies the data value.

SearchSearchItemTriggerABusFlexrayEoftype ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:EOFTYPE command.

Description

This command sets or queries the FLEXRAY bus search trigger end of file type. The search number is specified by x.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:EOFTYPE? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:EOFTYPE? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:EOFTYPE value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:EOFTYPE {ALL|STATIC|DYNAMIC}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:EOFTYPE?

Info

ALL specifies either end of file type.
STATIC specifies the static end of file type.
DYNAMIC specifies the static end of file type.

SearchSearchItemTriggerABusFlexrayErrtype ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:ERRTYPE command.

Description

This command sets or queries the FLEXRAY bus search trigger error type. The search number is specified by x.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:ERRTYPE? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:ERRTYPE? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:ERRTYPE value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:ERRTYPE {CRCHEADer|CRCTRAILer|NULLFRSTATIC|NULLFRDYNAMIC|SYNCFRAME|STARTUPNOSYNC}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:ERRTYPE?

Info

CRCHeader sets the error type to CRCHeader.
CRCTrailer sets the error type to CRCTrailer.
NULLFRStatic sets the error type to NULLFRStatic.
NULLFRDynamic sets the error type to NULLFRDynamic.
SYNCFrame sets the error type to SYNCFrame.
STARTupnosync sets the error type to STARTupnosync.

SearchSearchItemTriggerABusFlexrayFrametype ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:FRAMEType command.

Description

This command sets or queries the FLEXRAY bus search trigger frame type. The search number is specified by x.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:FRAMEType? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:FRAMEType? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:FRAMEType value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:FRAMEType {NORMal|PAYload|NULL|SYNC|STARTup}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:FRAMEType?

Info

NORMal sets the frame type to normal.
PAYload sets the frame type to payload.
NULL sets the frame type to null.
SYNC sets the frame type to sync.
STARTup sets the frame type to startup.

SearchSearchItemTriggerABusFlexrayHeader ¶

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:HEADER command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:HEADER? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:HEADER? query and raise an AssertionError if the returned value does not match value.

Properties

.crc: The SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:HEADER:CRC command.
.cyclecount: The SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:HEADER:CYCLECount command.
.frameid: The SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:HEADER:FRAMEID command.
.indbits: The SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:HEADER:INDBits command.
.paylength: The SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:HEADER:PAYLENgth command.

crc `property` ¶

crc: SearchSearchItemTriggerABusFlexrayHeaderCrc

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:HEADER:CRC command.

Description

This command sets or queries the FLEXRAY bus search trigger header CRC. The search number is specified by x.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:HEADER:CRC? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:HEADER:CRC? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:HEADER:CRC value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:HEADER:CRC <STRING>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:HEADER:CRC?

Info

<STRING> specifies the CRC.

cyclecount `property` ¶

cyclecount: SearchSearchItemTriggerABusFlexrayHeaderCyclecount

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:HEADER:CYCLECount command.

Description

This command sets or queries the FLEXRAY bus search trigger header cycle count. The search number is specified by x.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:HEADER:CYCLECount? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:HEADER:CYCLECount? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:HEADER:CYCLECount value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:HEADER:CYCLECount <STRING>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:HEADER:CYCLECount?

Info

<STRING> specifies the header cycle count.

frameid `property` ¶

frameid: SearchSearchItemTriggerABusFlexrayHeaderFrameid

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:HEADER:FRAMEID command.

Description

This command sets or queries the FLEXRAY bus search trigger header frame id. The search number is specified by x.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:HEADER:FRAMEID? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:HEADER:FRAMEID? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:HEADER:FRAMEID value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:HEADER:FRAMEID <STRING>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:HEADER:FRAMEID?

Info

<STRING> specifies the frame ID.

indbits `property` ¶

indbits: SearchSearchItemTriggerABusFlexrayHeaderIndbits

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:HEADER:INDBits command.

Description

This command sets or queries the FLEXRAY bus search header Indicator Bits. The search number is specified by x.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:HEADER:INDBits? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:HEADER:INDBits? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:HEADER:INDBits value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:HEADER:INDBits <STRING>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:HEADER:INDBits?

Info

<STRING> specifies the header Indicator Bits.

paylength `property` ¶

paylength: SearchSearchItemTriggerABusFlexrayHeaderPaylength

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:HEADER:PAYLENgth command.

Description

This command sets or queries the FLEXRAY bus search trigger header payload length. The search number is specified by x.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:HEADER:PAYLENgth? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:HEADER:PAYLENgth? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:HEADER:PAYLENgth value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:HEADER:PAYLENgth <STRING>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:HEADER:PAYLENgth?

Info

<STRING> specifies the header Payload Length.

SearchSearchItemTriggerABusFlexrayHeaderCrc ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:HEADER:CRC command.

Description

This command sets or queries the FLEXRAY bus search trigger header CRC. The search number is specified by x.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:HEADER:CRC? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:HEADER:CRC? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:HEADER:CRC value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:HEADER:CRC <STRING>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:HEADER:CRC?

Info

<STRING> specifies the CRC.

SearchSearchItemTriggerABusFlexrayHeaderCyclecount ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:HEADER:CYCLECount command.

Description

This command sets or queries the FLEXRAY bus search trigger header cycle count. The search number is specified by x.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:HEADER:CYCLECount? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:HEADER:CYCLECount? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:HEADER:CYCLECount value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:HEADER:CYCLECount <STRING>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:HEADER:CYCLECount?

Info

<STRING> specifies the header cycle count.

SearchSearchItemTriggerABusFlexrayHeaderFrameid ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:HEADER:FRAMEID command.

Description

This command sets or queries the FLEXRAY bus search trigger header frame id. The search number is specified by x.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:HEADER:FRAMEID? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:HEADER:FRAMEID? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:HEADER:FRAMEID value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:HEADER:FRAMEID <STRING>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:HEADER:FRAMEID?

Info

<STRING> specifies the frame ID.

SearchSearchItemTriggerABusFlexrayHeaderIndbits ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:HEADER:INDBits command.

Description

This command sets or queries the FLEXRAY bus search header Indicator Bits. The search number is specified by x.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:HEADER:INDBits? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:HEADER:INDBits? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:HEADER:INDBits value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:HEADER:INDBits <STRING>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:HEADER:INDBits?

Info

<STRING> specifies the header Indicator Bits.

SearchSearchItemTriggerABusFlexrayHeaderPaylength ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:HEADER:PAYLENgth command.

Description

This command sets or queries the FLEXRAY bus search trigger header payload length. The search number is specified by x.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:HEADER:PAYLENgth? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:HEADER:PAYLENgth? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:HEADER:PAYLENgth value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:HEADER:PAYLENgth <STRING>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:HEADER:PAYLENgth?

Info

<STRING> specifies the header Payload Length.

SearchSearchItemTriggerABusFlexrayIdentifier ¶

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:IDentifier command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:IDentifier? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:IDentifier? query and raise an AssertionError if the returned value does not match value.

Properties

.format: The SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:IDentifier:FORMat command.
.qualifier: The SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:IDentifier:QUALifier command.
.value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:IDentifier:VALue command.

format `property` ¶

format: SearchSearchItemTriggerABusFlexrayIdentifierFormat

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:IDentifier:FORMat command.

Description

This command sets or queries the FLEXRAY bus search trigger identifier format. The search number is specified by x.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:IDentifier:FORMat? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:IDentifier:FORMat? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:IDentifier:FORMat value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:IDentifier:FORMat {BINary|HEX}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:IDentifier:FORMat?

Info

BINary specifies the identifier format as binary.
HEX specifies the identifier format as hexadecimal.

qualifier `property` ¶

qualifier: SearchSearchItemTriggerABusFlexrayIdentifierQualifier

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:IDentifier:QUALifier command.

Description

This command sets or queries the FLEXRAY bus search trigger identifier qualifier. The search number is specified by x.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:IDentifier:QUALifier? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:IDentifier:QUALifier? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:IDentifier:QUALifier value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:IDentifier:QUALifier {EQUal|LESSEQual|MOREEQual|UNEQual|LESSthan|MOREthan}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:IDentifier:QUALifier?

value `property` ¶

value: SearchSearchItemTriggerABusFlexrayIdentifierValue

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:IDentifier:VALue command.

Description

This command sets or queries the FLEXRAY bus search trigger identifier value. The search number is specified by x.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:IDentifier:VALue? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:IDentifier:VALue? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:IDentifier:VALue value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:IDentifier:VALue <STRING>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:IDentifier:VALue?

Info

<STRING> specifies the identifier value.

SearchSearchItemTriggerABusFlexrayIdentifierFormat ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:IDentifier:FORMat command.

Description

This command sets or queries the FLEXRAY bus search trigger identifier format. The search number is specified by x.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:IDentifier:FORMat? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:IDentifier:FORMat? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:IDentifier:FORMat value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:IDentifier:FORMat {BINary|HEX}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:IDentifier:FORMat?

Info

BINary specifies the identifier format as binary.
HEX specifies the identifier format as hexadecimal.

SearchSearchItemTriggerABusFlexrayIdentifierQualifier ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:IDentifier:QUALifier command.

Description

This command sets or queries the FLEXRAY bus search trigger identifier qualifier. The search number is specified by x.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:IDentifier:QUALifier? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:IDentifier:QUALifier? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:IDentifier:QUALifier value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:IDentifier:QUALifier {EQUal|LESSEQual|MOREEQual|UNEQual|LESSthan|MOREthan}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:IDentifier:QUALifier?

SearchSearchItemTriggerABusFlexrayIdentifierValue ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:IDentifier:VALue command.

Description

This command sets or queries the FLEXRAY bus search trigger identifier value. The search number is specified by x.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:IDentifier:VALue? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:IDentifier:VALue? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:IDentifier:VALue value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:IDentifier:VALue <STRING>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:IDentifier:VALue?

Info

<STRING> specifies the identifier value.

SearchSearchItemTriggerABusI2c ¶

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C? query and raise an AssertionError if the returned value does not match value.

Properties

.address: The SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:ADDress command tree.
.condition: The SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:CONDition command.
.data: The SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:DATa command tree.

address `property` ¶

address: SearchSearchItemTriggerABusI2cAddress

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:ADDress command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:ADDress? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:ADDress? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.format: The SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:ADDress:FORMat command.
.mode: The SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:ADDress:MODe command.
.type: The SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:ADDress:TYPe command.
.value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:ADDress:VALue command.

condition `property` ¶

condition: SearchSearchItemTriggerABusI2cCondition

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:CONDition command.

Description

This command sets or queries the trigger condition for the specified I2C bus trigger search to determine where to place a mark. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:CONDition? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:CONDition? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:CONDition value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:CONDition {ADDress|ADDRANDDATA|DATa|ACKMISS|REPEATstart|STARt|STOP}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:CONDition?

Info

ADDress specifies the trigger condition as Address.
ADDRANDDATA specifies the trigger condition as Address and Data.
DATa specifies the trigger condition as Data.
ACKMISS specifies the trigger condition as Missing of Acknowledgement.
REPEATstart specifies the trigger condition as Repeat of Start.
STARt specifies the trigger condition as Start.
STOP specifies the trigger condition as Stop.

data `property` ¶

data: SearchSearchItemTriggerABusI2cData

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:DATa command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:DATa? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:DATa? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.direction: The SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:DATa:DIRection command.
.format: The SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:DATa:FORMat command.
.size: The SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:DATa:SIZe command.
.value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:DATa:VALue command.

SearchSearchItemTriggerABusI2cAddress ¶

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:ADDress command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:ADDress? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:ADDress? query and raise an AssertionError if the returned value does not match value.

Properties

.format: The SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:ADDress:FORMat command.
.mode: The SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:ADDress:MODe command.
.type: The SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:ADDress:TYPe command.
.value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:ADDress:VALue command.

format `property` ¶

format: SearchSearchItemTriggerABusI2cAddressFormat

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:ADDress:FORMat command.

Description

This command sets or queries the address format for the I2C bus trigger search to determine where to place a mark. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:ADDress:FORMat? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:ADDress:FORMat? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:ADDress:FORMat value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:ADDress:FORMat {BINary|HEXadecimal}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:ADDress:FORMat?

Info

BINary specifies the address format as Binary.
HEXadecimal specifies the address format as Hexadecimal.

mode `property` ¶

mode: SearchSearchItemTriggerABusI2cAddressMode

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:ADDress:MODe command.

Description

This command sets or queries the address mode for the specified I2C bus trigger search to determine where to place a mark. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:ADDress:MODe? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:ADDress:MODe? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:ADDress:MODe value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:ADDress:MODe {ADDR10|ADDR7}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:ADDress:MODe?

Info

ADDR10 specifies the address mode as ADDR10.
ADDR7 specifies the address mode as ADDR7.

type `property` ¶

type: SearchSearchItemTriggerABusI2cAddressType

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:ADDress:TYPe command.

Description

This command sets or queries the address type for the specified I2C bus trigger search to determine where to place a mark. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:ADDress:TYPe? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:ADDress:TYPe? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:ADDress:TYPe value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:ADDress:TYPe {CBUS|EEPROm|GENeralcall|HSMODe|NONe|STARtbyte}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:ADDress:TYPe?

Info

CBUS specifies the address type as CBUS.
EEPROm specifies the address type as EEPROM.
GENeralcall specifies the address type as General Call.
HSMODe specifies the address type as High Speed Mode.
NONe specifies the address type as None.
STARtbyte specifies the address type as Start Byte.

value `property` ¶

value: SearchSearchItemTriggerABusI2cAddressValue

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:ADDress:VALue command.

Description

This command sets or queries the address string when the search condition for the specified search is Address or AddressData.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:ADDress:VALue? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:ADDress:VALue? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:ADDress:VALue value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:ADDress:VALue <string>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:ADDress:VALue?

Info

<string> specifies the address value. This is either a 7-bit or 10-bit value depending on the address mode. The valid characters are 0-9, A-F, and X for addresses in hexadecimal format; and 0, 1, and X otherwise.

SearchSearchItemTriggerABusI2cAddressFormat ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:ADDress:FORMat command.

Description

This command sets or queries the address format for the I2C bus trigger search to determine where to place a mark. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:ADDress:FORMat? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:ADDress:FORMat? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:ADDress:FORMat value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:ADDress:FORMat {BINary|HEXadecimal}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:ADDress:FORMat?

Info

BINary specifies the address format as Binary.
HEXadecimal specifies the address format as Hexadecimal.

SearchSearchItemTriggerABusI2cAddressMode ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:ADDress:MODe command.

Description

This command sets or queries the address mode for the specified I2C bus trigger search to determine where to place a mark. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:ADDress:MODe? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:ADDress:MODe? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:ADDress:MODe value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:ADDress:MODe {ADDR10|ADDR7}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:ADDress:MODe?

Info

ADDR10 specifies the address mode as ADDR10.
ADDR7 specifies the address mode as ADDR7.

SearchSearchItemTriggerABusI2cAddressType ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:ADDress:TYPe command.

Description

This command sets or queries the address type for the specified I2C bus trigger search to determine where to place a mark. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:ADDress:TYPe? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:ADDress:TYPe? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:ADDress:TYPe value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:ADDress:TYPe {CBUS|EEPROm|GENeralcall|HSMODe|NONe|STARtbyte}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:ADDress:TYPe?

Info

CBUS specifies the address type as CBUS.
EEPROm specifies the address type as EEPROM.
GENeralcall specifies the address type as General Call.
HSMODe specifies the address type as High Speed Mode.
NONe specifies the address type as None.
STARtbyte specifies the address type as Start Byte.

SearchSearchItemTriggerABusI2cAddressValue ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:ADDress:VALue command.

Description

This command sets or queries the address string when the search condition for the specified search is Address or AddressData.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:ADDress:VALue? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:ADDress:VALue? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:ADDress:VALue value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:ADDress:VALue <string>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:ADDress:VALue?

Info

<string> specifies the address value. This is either a 7-bit or 10-bit value depending on the address mode. The valid characters are 0-9, A-F, and X for addresses in hexadecimal format; and 0, 1, and X otherwise.

SearchSearchItemTriggerABusI2cCondition ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:CONDition command.

Description

This command sets or queries the trigger condition for the specified I2C bus trigger search to determine where to place a mark. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:CONDition? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:CONDition? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:CONDition value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:CONDition {ADDress|ADDRANDDATA|DATa|ACKMISS|REPEATstart|STARt|STOP}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:CONDition?

Info

ADDress specifies the trigger condition as Address.
ADDRANDDATA specifies the trigger condition as Address and Data.
DATa specifies the trigger condition as Data.
ACKMISS specifies the trigger condition as Missing of Acknowledgement.
REPEATstart specifies the trigger condition as Repeat of Start.
STARt specifies the trigger condition as Start.
STOP specifies the trigger condition as Stop.

SearchSearchItemTriggerABusI2cData ¶

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:DATa command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:DATa? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:DATa? query and raise an AssertionError if the returned value does not match value.

Properties

.direction: The SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:DATa:DIRection command.
.format: The SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:DATa:FORMat command.
.size: The SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:DATa:SIZe command.
.value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:DATa:VALue command.

direction `property` ¶

direction: SearchSearchItemTriggerABusI2cDataDirection

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:DATa:DIRection command.

Description

This command sets or queries the direction of the data for the I2C bus trigger search to determine where to place a mark. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:DATa:DIRection? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:DATa:DIRection? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:DATa:DIRection value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:DATa:DIRection {DONTCare|READ|WRITE}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:DATa:DIRection?

Info

DONTCare specifies the direction of data as Don’t Care.
READ specifies the direction of data as Read.
WRITE specifies the direction of data as Write.

format `property` ¶

format: SearchSearchItemTriggerABusI2cDataFormat

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:DATa:FORMat command.

Description

This command sets or queries the trigger data format for the specified I2C bus trigger search to determine where to place a mark. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:DATa:FORMat? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:DATa:FORMat? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:DATa:FORMat value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:DATa:FORMat {BINary|HEXadecimal}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:DATa:FORMat?

Info

BINary specifies the trigger data format as Binary.
HEX specifies the trigger data format as Hexadecimal.

size `property` ¶

size: SearchSearchItemTriggerABusI2cDataSize

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:DATa:SIZe command.

Description

This command sets or queries the length of the data string in bytes used for the specified I2C bus trigger search to determine where to place a mark. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:DATa:SIZe? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:DATa:SIZe? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:DATa:SIZe value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:DATa:SIZe <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:DATa:SIZe?

Info

<NR3> specifies the data size in bytes.

value `property` ¶

value: SearchSearchItemTriggerABusI2cDataValue

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:DATa:VALue command.

Description

This command sets or queries the data value of the data token for the specified I2C bus trigger search to determine where to place a mark. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:DATa:VALue? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:DATa:VALue? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:DATa:VALue value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:DATa:VALue <string>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:DATa:VALue?

Info

<string> specifies the data value. The valid characters are 0, 1, or X for binary format; and A-F, 0-9, and X for hexadecimal format.

SearchSearchItemTriggerABusI2cDataDirection ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:DATa:DIRection command.

Description

This command sets or queries the direction of the data for the I2C bus trigger search to determine where to place a mark. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:DATa:DIRection? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:DATa:DIRection? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:DATa:DIRection value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:DATa:DIRection {DONTCare|READ|WRITE}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:DATa:DIRection?

Info

DONTCare specifies the direction of data as Don’t Care.
READ specifies the direction of data as Read.
WRITE specifies the direction of data as Write.

SearchSearchItemTriggerABusI2cDataFormat ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:DATa:FORMat command.

Description

This command sets or queries the trigger data format for the specified I2C bus trigger search to determine where to place a mark. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:DATa:FORMat? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:DATa:FORMat? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:DATa:FORMat value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:DATa:FORMat {BINary|HEXadecimal}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:DATa:FORMat?

Info

BINary specifies the trigger data format as Binary.
HEX specifies the trigger data format as Hexadecimal.

SearchSearchItemTriggerABusI2cDataSize ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:DATa:SIZe command.

Description

This command sets or queries the length of the data string in bytes used for the specified I2C bus trigger search to determine where to place a mark. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:DATa:SIZe? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:DATa:SIZe? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:DATa:SIZe value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:DATa:SIZe <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:DATa:SIZe?

Info

<NR3> specifies the data size in bytes.

SearchSearchItemTriggerABusI2cDataValue ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:DATa:VALue command.

Description

This command sets or queries the data value of the data token for the specified I2C bus trigger search to determine where to place a mark. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:DATa:VALue? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:DATa:VALue? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:DATa:VALue value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:DATa:VALue <string>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:I2C:DATa:VALue?

Info

<string> specifies the data value. The valid characters are 0, 1, or X for binary format; and A-F, 0-9, and X for hexadecimal format.

SearchSearchItemTriggerABusLin ¶

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN? query and raise an AssertionError if the returned value does not match value.

Properties

.condition: The SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:CONDition command.
.data: The SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa command tree.
.errtype: The SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:ERRTYPE command.
.identifier: The SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:IDentifier command tree.

condition `property` ¶

condition: SearchSearchItemTriggerABusLinCondition

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:CONDition command.

Description

This command sets or queries the LIN bus search trigger condition. The search number is specified by x.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:CONDition? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:CONDition? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:CONDition value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:CONDition {DATA|IDANDDATA|ERROR|IDentifier|SLEEP|SYNC|WAKEup}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:CONDition?

data `property` ¶

data: SearchSearchItemTriggerABusLinData

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.format: The SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa:FORMat command.
.qualifier: The SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa:QUALifier command.
.size: The SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa:SIZe command.
.value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa:VALue command.

errtype `property` ¶

errtype: SearchSearchItemTriggerABusLinErrtype

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:ERRTYPE command.

Description

This command sets or queries the error type for a LIN bus search. The search number is specified by x. The search condition must be set to ERROR.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:ERRTYPE? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:ERRTYPE? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:ERRTYPE value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:ERRTYPE {CHecksum|PARity|SYNC}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:ERRTYPE?

Info

CHecksum specifies the error type is checksum.
PARity specifies the error type is parity.
SYNC specifies the error type is sync.

identifier `property` ¶

identifier: SearchSearchItemTriggerABusLinIdentifier

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:IDentifier command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:IDentifier? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:IDentifier? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.format: The SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:IDentifier:FORMat command.
.value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:IDentifier:VALue command.

SearchSearchItemTriggerABusLinCondition ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:CONDition command.

Description

This command sets or queries the LIN bus search trigger condition. The search number is specified by x.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:CONDition? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:CONDition? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:CONDition value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:CONDition {DATA|IDANDDATA|ERROR|IDentifier|SLEEP|SYNC|WAKEup}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:CONDition?

SearchSearchItemTriggerABusLinData ¶

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa? query and raise an AssertionError if the returned value does not match value.

Properties

.format: The SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa:FORMat command.
.qualifier: The SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa:QUALifier command.
.size: The SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa:SIZe command.
.value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa:VALue command.

format `property` ¶

format: SearchSearchItemTriggerABusLinDataFormat

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa:FORMat command.

Description

This command sets or queries the LIN bus search trigger data format. The search number is specified by x.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa:FORMat? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa:FORMat? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa:FORMat value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa:FORMat {BINary|HEX}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa:FORMat?

Info

BINary specifies the data format as binary.
HEX specifies the data format as hexadecimal.

qualifier `property` ¶

qualifier: SearchSearchItemTriggerABusLinDataQualifier

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa:QUALifier command.

Description

This command sets or queries the LIN bus search trigger data qualifier. The search number is specified by x.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa:QUALifier? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa:QUALifier? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa:QUALifier value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa:QUALifier {EQUal|LESSEQual|MOREEQual|UNEQual|LESSthan|MOREthan}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa:QUALifier?

size `property` ¶

size: SearchSearchItemTriggerABusLinDataSize

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa:SIZe command.

Description

This command sets or queries the LIN bus search trigger data size in bytes. The search number is specified by x.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa:SIZe? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa:SIZe? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa:SIZe value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa:SIZe <nr3>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa:SIZe?

Info

<nr3> specifies the data size.

value `property` ¶

value: SearchSearchItemTriggerABusLinDataValue

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa:VALue command.

Description

This command sets or queries the LIN bus search trigger data value. The search number is specified by x.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa:VALue? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa:VALue? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa:VALue value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa:VALue <string>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa:VALue?

Info

<string> specifies the data value.

SearchSearchItemTriggerABusLinDataFormat ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa:FORMat command.

Description

This command sets or queries the LIN bus search trigger data format. The search number is specified by x.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa:FORMat? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa:FORMat? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa:FORMat value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa:FORMat {BINary|HEX}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa:FORMat?

Info

BINary specifies the data format as binary.
HEX specifies the data format as hexadecimal.

SearchSearchItemTriggerABusLinDataQualifier ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa:QUALifier command.

Description

This command sets or queries the LIN bus search trigger data qualifier. The search number is specified by x.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa:QUALifier? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa:QUALifier? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa:QUALifier value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa:QUALifier {EQUal|LESSEQual|MOREEQual|UNEQual|LESSthan|MOREthan}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa:QUALifier?

SearchSearchItemTriggerABusLinDataSize ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa:SIZe command.

Description

This command sets or queries the LIN bus search trigger data size in bytes. The search number is specified by x.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa:SIZe? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa:SIZe? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa:SIZe value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa:SIZe <nr3>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa:SIZe?

Info

<nr3> specifies the data size.

SearchSearchItemTriggerABusLinDataValue ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa:VALue command.

Description

This command sets or queries the LIN bus search trigger data value. The search number is specified by x.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa:VALue? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa:VALue? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa:VALue value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa:VALue <string>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:DATa:VALue?

Info

<string> specifies the data value.

SearchSearchItemTriggerABusLinErrtype ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:ERRTYPE command.

Description

This command sets or queries the error type for a LIN bus search. The search number is specified by x. The search condition must be set to ERROR.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:ERRTYPE? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:ERRTYPE? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:ERRTYPE value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:ERRTYPE {CHecksum|PARity|SYNC}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:ERRTYPE?

Info

CHecksum specifies the error type is checksum.
PARity specifies the error type is parity.
SYNC specifies the error type is sync.

SearchSearchItemTriggerABusLinIdentifier ¶

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:IDentifier command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:IDentifier? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:IDentifier? query and raise an AssertionError if the returned value does not match value.

Properties

.format: The SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:IDentifier:FORMat command.
.value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:IDentifier:VALue command.

format `property` ¶

format: SearchSearchItemTriggerABusLinIdentifierFormat

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:IDentifier:FORMat command.

Description

This command sets or queries the LIN bus search trigger identifier format. The search number is specified by x.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:IDentifier:FORMat? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:IDentifier:FORMat? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:IDentifier:FORMat value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:IDentifier:FORMat {BINary|HEX}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:IDentifier:FORMat?

Info

BINary specifies the identifier format as binary.
HEX specifies the identifier format as hexadecimal.

value `property` ¶

value: SearchSearchItemTriggerABusLinIdentifierValue

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:IDentifier:VALue command.

Description

This command sets or queries the LIN bus search identifier value. The search number is specified by x.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:IDentifier:VALue? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:IDentifier:VALue? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:IDentifier:VALue value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:IDentifier:VALue <string>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:IDentifier:VALue?

Info

<string> specifies the identifier value.

SearchSearchItemTriggerABusLinIdentifierFormat ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:IDentifier:FORMat command.

Description

This command sets or queries the LIN bus search trigger identifier format. The search number is specified by x.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:IDentifier:FORMat? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:IDentifier:FORMat? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:IDentifier:FORMat value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:IDentifier:FORMat {BINary|HEX}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:IDentifier:FORMat?

Info

BINary specifies the identifier format as binary.
HEX specifies the identifier format as hexadecimal.

SearchSearchItemTriggerABusLinIdentifierValue ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:IDentifier:VALue command.

Description

This command sets or queries the LIN bus search identifier value. The search number is specified by x.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:IDentifier:VALue? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:IDentifier:VALue? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:IDentifier:VALue value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:IDentifier:VALue <string>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:IDentifier:VALue?

Info

<string> specifies the identifier value.

SearchSearchItemTriggerABusMil1553b ¶

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B? query and raise an AssertionError if the returned value does not match value.

Properties

.command: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND command tree.
.condition: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:CONDition command.
.data: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:DATA command tree.
.errtype: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:ERRTYPE command.
.status: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATUS command tree.
.time: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:TIME command tree.

command `property` ¶

command: SearchSearchItemTriggerABusMil1553bCommand

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.address: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:ADDRess command tree.
.count: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:COUNt command.
.parity: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:PARity command.
.subaddress: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:SUBADdress command.
.trbit: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:TRBit command.

condition `property` ¶

condition: SearchSearchItemTriggerABusMil1553bCondition

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:CONDition command.

Description

This command specifies which word type or condition within a MIL-STD-1553 bus word to search on.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:CONDition? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:CONDition? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:CONDition value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:CONDition {SYNC|COMMAND|STATus|DATA|TIMe|ERRor}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:CONDition?

Info

SYNC refers to the 3-bit sync pulse that precedes each word.
COMMAND is one of 3 16-bit word types. It specifies the function that a remote terminal is to perform.
STATus is one of 3 16-bit word types. Remote terminals respond to valid message transmissions via status words.
DATA is one of 3 16-bit word types.
TIMe specifies to search for either the RT (remote terminal response time), or the IMG (Inter-message Gap). Use the commands SEARCH:SEARCHX:TRIGGER:A:BUS:MIL1553B:TIME:QUALIFIER, SEARCH:SEARCHX:TRIGGER:A:BUS:MIL1553B:TIME:LESSLIMIT, and SEARCH:SEARCHX:TRIGGER:A:BUS:MIL1553B:TIME:MORELIMIT to specify the time parameters.
ERRor specifies to search for a signaling error. (You can specify which type of error - Parity, Sync, Manchester or Non-contiguous Data - by using the command SEARCH:SEARCHX:TRIGGER:A:BUS:MIL1553B:ERRTYPE.).

data `property` ¶

data: SearchSearchItemTriggerABusMil1553bData

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:DATA command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:DATA? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:DATA? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.format: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:DATA:FORMat command.
.parity: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:DATA:PARity command.
.value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:DATA:VALue command.

errtype `property` ¶

errtype: SearchSearchItemTriggerABusMil1553bErrtype

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:ERRTYPE command.

Description

This command specifies the signaling error type to use for a MIL-STD-1553 bus data word search: Parity, Sync, Manchester, or Data. The search condition must be set to ERRor.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:ERRTYPE? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:ERRTYPE? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:ERRTYPE value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:ERRTYPE {PARity|SYNC|MANCHester|DATA}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:ERRTYPE?

status `property` ¶

status: SearchSearchItemTriggerABusMil1553bStatus

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATUS command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATUS? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATUS? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.address: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATUS:ADDRess command tree.
.bit: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATUS:BIT command tree.

time `property` ¶

time: SearchSearchItemTriggerABusMil1553bTime

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:TIME command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:TIME? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:TIME? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.lesslimit: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:TIME:LESSLimit command.
.morelimit: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:TIME:MORELimit command.
.qualifier: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:TIME:QUALifier command.

SearchSearchItemTriggerABusMil1553bCommand ¶

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND? query and raise an AssertionError if the returned value does not match value.

Properties

.address: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:ADDRess command tree.
.count: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:COUNt command.
.parity: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:PARity command.
.subaddress: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:SUBADdress command.
.trbit: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:TRBit command.

address `property` ¶

address: SearchSearchItemTriggerABusMil1553bCommandAddress

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:ADDRess command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:ADDRess? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:ADDRess? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.format: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:ADDRess:FORMat command.
.qualifier: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:ADDRess:QUALifier command.
.value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:ADDRess:VALue command.

count `property` ¶

count: SearchSearchItemTriggerABusMil1553bCommandCount

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:COUNt command.

Description

This command specifies the bit pattern for the 5-bit Word Count/Mode Code sub-address field to use in a MIL-STD-1553 bus command word trigger. (Use the commandSEARCH:SEARCHX:TRIGGER:A:BUS:MIL1553B:COMMAND:SUBADDRESS to specify Word Count or Mode Code.) In Word Count mode, this field defines the number of data words to be transmitted or received, depending on the T/R bit setting. (Use the commandSEARCH:SEARCHX:TRIGGER:A:BUS:MIL1553B:COMMAND:TRBIT to set the T/R bit.) A word count value of 0 actually indicates a transfer of 32 data words.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:COUNt? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:COUNt? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:COUNt value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:COUNt <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:COUNt?

Info

QString is a quoted string of up to 5 characters, where the allowable characters are 0, 1 and X.

Sub-properties

.format: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:COUNt:FORMat command.

parity `property` ¶

parity: SearchSearchItemTriggerABusMil1553bCommandParity

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:PARity command.

Description

This command specifies the parity to use in a MIL-STD-1553 bus command word search. The search condition needs to be set to COMMAND.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:PARity? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:PARity? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:PARity value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:PARity {0|1|X|ZERo|ONE|NOCARE|OFF|ON}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:PARity?

Info

0
1
X sets the value to X (‘don’t care’) which is the default.
ZERO sets the value to 0.
ONE sets the value to 1.
NOCARE sets the value to X (‘don’t care’) which is the default.
OFF sets the value to 0.
ON sets the value to 1.

subaddress `property` ¶

subaddress: SearchSearchItemTriggerABusMil1553bCommandSubaddress

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:SUBADdress command.

Description

This command specifies the 5 bit sub-address to use in a MIL-STD-1553 bus command word sub-address search. When the sub-address value is set to 00000 or 11111 binary, it specifies that the command is a ‘Mode Code’ command. Any other value specifies that it is a ‘Word Count’ command. The default is all X’s (don’t care). The search condition needs to be set to COMMAND.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:SUBADdress? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:SUBADdress? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:SUBADdress value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:SUBADdress <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:SUBADdress?

Info

<QString> is the word count value.

Sub-properties

.format: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:SUBADdress:FORMat command.

trbit `property` ¶

trbit: SearchSearchItemTriggerABusMil1553bCommandTrbit

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:TRBit command.

Description

This command specifies to search on either a ‘transmit’ or a ‘receive’ signal for the transmit/receive bit (bit 9), for a MIL-STD-1553 bus command word search. The search condition needs to be set to COMMAND.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:TRBit? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:TRBit? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:TRBit value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:TRBit {RX|TX|X|DONTCare}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:TRBit?

Info

TX (logic 1) directs the instrument to search for a TX or ‘transmit’ from a remote terminal .
RX (logic 0) directs the instrument to search for an RX or ‘receive’ from a remote terminal.
X, DONTCare indicates ‘don’t care’.

SearchSearchItemTriggerABusMil1553bCommandAddress ¶

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:ADDRess command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:ADDRess? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:ADDRess? query and raise an AssertionError if the returned value does not match value.

Properties

.format: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:ADDRess:FORMat command.
.qualifier: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:ADDRess:QUALifier command.
.value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:ADDRess:VALue command.

format `property` ¶

format: SearchSearchItemTriggerABusMil1553bCommandAddressFormat

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:ADDRess:FORMat command.

Description

This command sets the data format of the address (either binary or hex) to use in a MIL-STD-1553 bus command word search. The search condition needs to be set to COMMAND.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:ADDRess:FORMat? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:ADDRess:FORMat? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:ADDRess:FORMat value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:ADDRess:FORMat {BINary|HEX}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:ADDRess:FORMat?

Info

BINary specifies the data format as binary.
HEX specifies the data format as hexadecimal.

qualifier `property` ¶

qualifier: SearchSearchItemTriggerABusMil1553bCommandAddressQualifier

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:ADDRess:QUALifier command.

Description

This command specifies the qualifier to use when searching on a MIL-STD-1553 bus command word remote terminal address field. The search condition needs to be set to COMMAND.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:ADDRess:QUALifier? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:ADDRess:QUALifier? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:ADDRess:QUALifier value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:ADDRess:QUALifier {LESSthan|MOREthan|EQual|UNEQual|LESSEQual|MOREEQual}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:ADDRess:QUALifier?

Info

LESSthan sets the Command Address qualifier to less than.
MOREthan sets the Command Address qualifier to greater than.
EQual sets the Command Address qualifier to equal.
UNEQual sets the Command Address qualifier to not equal.
LESSEQual sets the Command Address qualifier to less than or equal.
MOREEQual sets the Command Address qualifier to greater than or equal.

value `property` ¶

value: SearchSearchItemTriggerABusMil1553bCommandAddressValue

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:ADDRess:VALue command.

Description

This command specifies the value of the 5-bit remote terminal address to use in a MIL-STD-1553 bus command word search. The search condition needs to be set to COMMAND.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:ADDRess:VALue? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:ADDRess:VALue? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:ADDRess:VALue value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:ADDRess:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:ADDRess:VALue?

Info

<QString> is the address value.

SearchSearchItemTriggerABusMil1553bCommandAddressFormat ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:ADDRess:FORMat command.

Description

This command sets the data format of the address (either binary or hex) to use in a MIL-STD-1553 bus command word search. The search condition needs to be set to COMMAND.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:ADDRess:FORMat? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:ADDRess:FORMat? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:ADDRess:FORMat value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:ADDRess:FORMat {BINary|HEX}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:ADDRess:FORMat?

Info

BINary specifies the data format as binary.
HEX specifies the data format as hexadecimal.

SearchSearchItemTriggerABusMil1553bCommandAddressQualifier ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:ADDRess:QUALifier command.

Description

This command specifies the qualifier to use when searching on a MIL-STD-1553 bus command word remote terminal address field. The search condition needs to be set to COMMAND.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:ADDRess:QUALifier? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:ADDRess:QUALifier? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:ADDRess:QUALifier value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:ADDRess:QUALifier {LESSthan|MOREthan|EQual|UNEQual|LESSEQual|MOREEQual}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:ADDRess:QUALifier?

Info

LESSthan sets the Command Address qualifier to less than.
MOREthan sets the Command Address qualifier to greater than.
EQual sets the Command Address qualifier to equal.
UNEQual sets the Command Address qualifier to not equal.
LESSEQual sets the Command Address qualifier to less than or equal.
MOREEQual sets the Command Address qualifier to greater than or equal.

SearchSearchItemTriggerABusMil1553bCommandAddressValue ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:ADDRess:VALue command.

Description

This command specifies the value of the 5-bit remote terminal address to use in a MIL-STD-1553 bus command word search. The search condition needs to be set to COMMAND.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:ADDRess:VALue? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:ADDRess:VALue? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:ADDRess:VALue value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:ADDRess:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:ADDRess:VALue?

Info

<QString> is the address value.

SearchSearchItemTriggerABusMil1553bCommandCount ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:COUNt command.

Description

This command specifies the bit pattern for the 5-bit Word Count/Mode Code sub-address field to use in a MIL-STD-1553 bus command word trigger. (Use the commandSEARCH:SEARCHX:TRIGGER:A:BUS:MIL1553B:COMMAND:SUBADDRESS to specify Word Count or Mode Code.) In Word Count mode, this field defines the number of data words to be transmitted or received, depending on the T/R bit setting. (Use the commandSEARCH:SEARCHX:TRIGGER:A:BUS:MIL1553B:COMMAND:TRBIT to set the T/R bit.) A word count value of 0 actually indicates a transfer of 32 data words.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:COUNt? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:COUNt? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:COUNt value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:COUNt <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:COUNt?

Info

QString is a quoted string of up to 5 characters, where the allowable characters are 0, 1 and X.

Properties

.format: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:COUNt:FORMat command.

format `property` ¶

format: SearchSearchItemTriggerABusMil1553bCommandCountFormat

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:COUNt:FORMat command.

Description

This command specifies the data format (binary or hex) of the bit pattern for the 5-bit Word Count/Mode Code field to use in a MIL-STD-1553 bus command word search. The search condition needs to be set to COMMAND.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:COUNt:FORMat? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:COUNt:FORMat? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:COUNt:FORMat value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:COUNt:FORMat {BINary|HEX}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:COUNt:FORMat?

Info

BINary specifies the data format as binary.
HEX specifies the data format as hexadecimal.

SearchSearchItemTriggerABusMil1553bCommandCountFormat ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:COUNt:FORMat command.

Description

This command specifies the data format (binary or hex) of the bit pattern for the 5-bit Word Count/Mode Code field to use in a MIL-STD-1553 bus command word search. The search condition needs to be set to COMMAND.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:COUNt:FORMat? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:COUNt:FORMat? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:COUNt:FORMat value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:COUNt:FORMat {BINary|HEX}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:COUNt:FORMat?

Info

BINary specifies the data format as binary.
HEX specifies the data format as hexadecimal.

SearchSearchItemTriggerABusMil1553bCommandParity ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:PARity command.

Description

This command specifies the parity to use in a MIL-STD-1553 bus command word search. The search condition needs to be set to COMMAND.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:PARity? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:PARity? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:PARity value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:PARity {0|1|X|ZERo|ONE|NOCARE|OFF|ON}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:PARity?

Info

0
1
X sets the value to X (‘don’t care’) which is the default.
ZERO sets the value to 0.
ONE sets the value to 1.
NOCARE sets the value to X (‘don’t care’) which is the default.
OFF sets the value to 0.
ON sets the value to 1.

SearchSearchItemTriggerABusMil1553bCommandSubaddress ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:SUBADdress command.

Description

This command specifies the 5 bit sub-address to use in a MIL-STD-1553 bus command word sub-address search. When the sub-address value is set to 00000 or 11111 binary, it specifies that the command is a ‘Mode Code’ command. Any other value specifies that it is a ‘Word Count’ command. The default is all X’s (don’t care). The search condition needs to be set to COMMAND.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:SUBADdress? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:SUBADdress? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:SUBADdress value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:SUBADdress <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:SUBADdress?

Info

<QString> is the word count value.

Properties

.format: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:SUBADdress:FORMat command.

format `property` ¶

format: SearchSearchItemTriggerABusMil1553bCommandSubaddressFormat

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:SUBADdress:FORMat command.

Description

This command specifies the data format (binary or hex) of the sub-address field bit pattern to use in a MIL-STD-1553 bus command word sub-address search. The search condition needs to be set to COMMAND.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:SUBADdress:FORMat? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:SUBADdress:FORMat? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:SUBADdress:FORMat value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:SUBADdress:FORMat {BINary|HEX}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:SUBADdress:FORMat?

Info

BINary specifies the data format as binary.
HEX specifies the data format as hexadecimal.

SearchSearchItemTriggerABusMil1553bCommandSubaddressFormat ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:SUBADdress:FORMat command.

Description

This command specifies the data format (binary or hex) of the sub-address field bit pattern to use in a MIL-STD-1553 bus command word sub-address search. The search condition needs to be set to COMMAND.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:SUBADdress:FORMat? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:SUBADdress:FORMat? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:SUBADdress:FORMat value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:SUBADdress:FORMat {BINary|HEX}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:SUBADdress:FORMat?

Info

BINary specifies the data format as binary.
HEX specifies the data format as hexadecimal.

SearchSearchItemTriggerABusMil1553bCommandTrbit ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:TRBit command.

Description

This command specifies to search on either a ‘transmit’ or a ‘receive’ signal for the transmit/receive bit (bit 9), for a MIL-STD-1553 bus command word search. The search condition needs to be set to COMMAND.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:TRBit? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:TRBit? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:TRBit value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:TRBit {RX|TX|X|DONTCare}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:TRBit?

Info

TX (logic 1) directs the instrument to search for a TX or ‘transmit’ from a remote terminal .
RX (logic 0) directs the instrument to search for an RX or ‘receive’ from a remote terminal.
X, DONTCare indicates ‘don’t care’.

SearchSearchItemTriggerABusMil1553bCondition ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:CONDition command.

Description

This command specifies which word type or condition within a MIL-STD-1553 bus word to search on.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:CONDition? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:CONDition? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:CONDition value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:CONDition {SYNC|COMMAND|STATus|DATA|TIMe|ERRor}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:CONDition?

Info

SYNC refers to the 3-bit sync pulse that precedes each word.
COMMAND is one of 3 16-bit word types. It specifies the function that a remote terminal is to perform.
STATus is one of 3 16-bit word types. Remote terminals respond to valid message transmissions via status words.
DATA is one of 3 16-bit word types.
TIMe specifies to search for either the RT (remote terminal response time), or the IMG (Inter-message Gap). Use the commands SEARCH:SEARCHX:TRIGGER:A:BUS:MIL1553B:TIME:QUALIFIER, SEARCH:SEARCHX:TRIGGER:A:BUS:MIL1553B:TIME:LESSLIMIT, and SEARCH:SEARCHX:TRIGGER:A:BUS:MIL1553B:TIME:MORELIMIT to specify the time parameters.
ERRor specifies to search for a signaling error. (You can specify which type of error
Parity, Sync, Manchester or Non-contiguous Data - by using the command SEARCH:SEARCHX:TRIGGER:A:BUS:MIL1553B:ERRTYPE.).

SearchSearchItemTriggerABusMil1553bData ¶

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:DATA command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:DATA? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:DATA? query and raise an AssertionError if the returned value does not match value.

Properties

.format: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:DATA:FORMat command.
.parity: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:DATA:PARity command.
.value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:DATA:VALue command.

format `property` ¶

format: SearchSearchItemTriggerABusMil1553bDataFormat

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:DATA:FORMat command.

Description

This command specifies the format (binary or hex) of the bit pattern to use for a MIL-STD-1553 bus data word search. The search condition needs to be set to DATA.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:DATA:FORMat? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:DATA:FORMat? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:DATA:FORMat value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:DATA:FORMat {BINary|HEX}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:DATA:FORMat?

Info

BINary specifies the data format as binary.
HEX specifies the data format as hexadecimal.

parity `property` ¶

parity: SearchSearchItemTriggerABusMil1553bDataParity

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:DATA:PARity command.

Description

This command specifies the parity to use when searching on a MIL-STD-1553 bus data word parity bit. The search condition must be set to DATA.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:DATA:PARity? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:DATA:PARity? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:DATA:PARity value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:DATA:PARity {0|1|X|ZERo|ONE|NOCARE|OFF|ON}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:DATA:PARity?

Info

0
1
X sets the value to X (‘don’t care’) which is the default.
ZERO sets the value to 0.
ONE sets the value to 1.
NOCARE sets the value to X (‘don’t care’) which is the default.
OFF sets the value to 0.
ON sets the value to 1.

value `property` ¶

value: SearchSearchItemTriggerABusMil1553bDataValue

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:DATA:VALue command.

Description

This command specifies the value to use for a MIL-STD-1553 bus data word search. This is a 16-bit field. The default is all X’s (don’t care). The search condition must be set to DATA.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:DATA:VALue? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:DATA:VALue? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:DATA:VALue value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:DATA:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:DATA:VALue?

SearchSearchItemTriggerABusMil1553bDataFormat ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:DATA:FORMat command.

Description

This command specifies the format (binary or hex) of the bit pattern to use for a MIL-STD-1553 bus data word search. The search condition needs to be set to DATA.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:DATA:FORMat? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:DATA:FORMat? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:DATA:FORMat value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:DATA:FORMat {BINary|HEX}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:DATA:FORMat?

Info

BINary specifies the data format as binary.
HEX specifies the data format as hexadecimal.

SearchSearchItemTriggerABusMil1553bDataParity ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:DATA:PARity command.

Description

This command specifies the parity to use when searching on a MIL-STD-1553 bus data word parity bit. The search condition must be set to DATA.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:DATA:PARity? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:DATA:PARity? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:DATA:PARity value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:DATA:PARity {0|1|X|ZERo|ONE|NOCARE|OFF|ON}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:DATA:PARity?

Info

0
1
X sets the value to X (‘don’t care’) which is the default.
ZERO sets the value to 0.
ONE sets the value to 1.
NOCARE sets the value to X (‘don’t care’) which is the default.
OFF sets the value to 0.
ON sets the value to 1.

SearchSearchItemTriggerABusMil1553bDataValue ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:DATA:VALue command.

Description

This command specifies the value to use for a MIL-STD-1553 bus data word search. This is a 16-bit field. The default is all X’s (don’t care). The search condition must be set to DATA.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:DATA:VALue? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:DATA:VALue? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:DATA:VALue value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:DATA:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:DATA:VALue?

SearchSearchItemTriggerABusMil1553bErrtype ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:ERRTYPE command.

Description

This command specifies the signaling error type to use for a MIL-STD-1553 bus data word search: Parity, Sync, Manchester, or Data. The search condition must be set to ERRor.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:ERRTYPE? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:ERRTYPE? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:ERRTYPE value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:ERRTYPE {PARity|SYNC|MANCHester|DATA}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:ERRTYPE?

SearchSearchItemTriggerABusMil1553bStatus ¶

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATUS command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATUS? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATUS? query and raise an AssertionError if the returned value does not match value.

Properties

.address: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATUS:ADDRess command tree.
.bit: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATUS:BIT command tree.

address `property` ¶

address: SearchSearchItemTriggerABusMil1553bStatusAddress

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATUS:ADDRess command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATUS:ADDRess? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATUS:ADDRess? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.format: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATUS:ADDRess:FORMat command.
.qualifier: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATUS:ADDRess:QUALifier command.
.value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATUS:ADDRess:VALue command.

bit `property` ¶

bit: SearchSearchItemTriggerABusMil1553bStatusBit

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATUS:BIT command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATUS:BIT? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATUS:BIT? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.bcr: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATUS:BIT:BCR command.
.busy: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATUS:BIT:BUSY command.
.dbca: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATUS:BIT:DBCA command.
.instr: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATUS:BIT:INSTR command.
.me: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATUS:BIT:ME command.
.parity: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATUS:BIT:PARity command.
.srq: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATUS:BIT:SRQ command.
.subsf: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATUS:BIT:SUBSF command.
.tf: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATUS:BIT:TF command.

SearchSearchItemTriggerABusMil1553bStatusAddress ¶

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATUS:ADDRess command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATUS:ADDRess? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATUS:ADDRess? query and raise an AssertionError if the returned value does not match value.

Properties

.format: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATUS:ADDRess:FORMat command.
.qualifier: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATUS:ADDRess:QUALifier command.
.value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATUS:ADDRess:VALue command.

format `property` ¶

format: SearchSearchItemTriggerABusMil1553bStatusAddressFormat

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATUS:ADDRess:FORMat command.

Description

This command specifies the format (binary or hex) of the bit pattern to use when searching on the MIL-STD-1553 status address field. The search condition needs to be set to STATUS.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATUS:ADDRess:FORMat? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATUS:ADDRess:FORMat? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATUS:ADDRess:FORMat value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATUS:ADDRess:FORMat {BINary|HEX}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATUS:ADDRess:FORMat?

Info

BINary specifies the data format as binary.
HEX specifies the data format as hexadecimal.

qualifier `property` ¶

qualifier: SearchSearchItemTriggerABusMil1553bStatusAddressQualifier

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATUS:ADDRess:QUALifier command.

Description

This command specifies the qualifier to use when searching on the MIL-STD-1553 status address field. The default is EQUAL. The search condition must be set to STATUS.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATUS:ADDRess:QUALifier? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATUS:ADDRess:QUALifier? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATUS:ADDRess:QUALifier value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATUS:ADDRess:QUALifier {LESSthan|MOREthan|EQual|UNEQual|LESSEQual|MOREEQual}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATUS:ADDRess:QUALifier?

Info

LESSthan sets the Status Address qualifier to less than.
MOREthan sets the Status Address qualifier to greater than.
EQual sets the Status Address qualifier to equal.
UNEQual sets the Status Address qualifier to not equal.
LESSEQual sets the Status Address qualifier to less than or equal.
MOREEQual sets the Status Address qualifier to greater than or equal.

value `property` ¶

value: SearchSearchItemTriggerABusMil1553bStatusAddressValue

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATUS:ADDRess:VALue command.

Description

This command specifies the value of the 5-bit remote terminal address to use when searching on the MIL-STD-1553 status address field. The default is all X’s (don’t care). The search condition must be set to STATUS.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATUS:ADDRess:VALue? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATUS:ADDRess:VALue? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATUS:ADDRess:VALue value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATUS:ADDRess:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATUS:ADDRess:VALue?

SearchSearchItemTriggerABusMil1553bStatusAddressFormat ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATUS:ADDRess:FORMat command.

Description

This command specifies the format (binary or hex) of the bit pattern to use when searching on the MIL-STD-1553 status address field. The search condition needs to be set to STATUS.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATUS:ADDRess:FORMat? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATUS:ADDRess:FORMat? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATUS:ADDRess:FORMat value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATUS:ADDRess:FORMat {BINary|HEX}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATUS:ADDRess:FORMat?

Info

BINary specifies the data format as binary.
HEX specifies the data format as hexadecimal.

SearchSearchItemTriggerABusMil1553bStatusAddressQualifier ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATUS:ADDRess:QUALifier command.

Description

This command specifies the qualifier to use when searching on the MIL-STD-1553 status address field. The default is EQUAL. The search condition must be set to STATUS.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATUS:ADDRess:QUALifier? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATUS:ADDRess:QUALifier? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATUS:ADDRess:QUALifier value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATUS:ADDRess:QUALifier {LESSthan|MOREthan|EQual|UNEQual|LESSEQual|MOREEQual}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATUS:ADDRess:QUALifier?

Info

LESSthan sets the Status Address qualifier to less than.
MOREthan sets the Status Address qualifier to greater than.
EQual sets the Status Address qualifier to equal.
UNEQual sets the Status Address qualifier to not equal.
LESSEQual sets the Status Address qualifier to less than or equal.
MOREEQual sets the Status Address qualifier to greater than or equal.

SearchSearchItemTriggerABusMil1553bStatusAddressValue ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATUS:ADDRess:VALue command.

Description

This command specifies the value of the 5-bit remote terminal address to use when searching on the MIL-STD-1553 status address field. The default is all X’s (don’t care). The search condition must be set to STATUS.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATUS:ADDRess:VALue? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATUS:ADDRess:VALue? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATUS:ADDRess:VALue value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATUS:ADDRess:VALue <QString>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATUS:ADDRess:VALue?

SearchSearchItemTriggerABusMil1553bStatusBit ¶

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATUS:BIT command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATUS:BIT? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATUS:BIT? query and raise an AssertionError if the returned value does not match value.

Properties

.bcr: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATUS:BIT:BCR command.
.busy: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATUS:BIT:BUSY command.
.dbca: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATUS:BIT:DBCA command.
.instr: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATUS:BIT:INSTR command.
.me: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATUS:BIT:ME command.
.parity: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATUS:BIT:PARity command.
.srq: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATUS:BIT:SRQ command.
.subsf: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATUS:BIT:SUBSF command.
.tf: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATUS:BIT:TF command.

bcr `property` ¶

bcr: SearchSearchItemTriggerABusMil1553bStatusBitBcr

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATUS:BIT:BCR command.

Description

This command specifies the status word broadcast command received (BCR) bit value (bit 15) to use when searching on the MIL-STD-1553 status bit field. The default is all X’s (don’t care). The search condition must be set to STATUS.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATUS:BIT:BCR? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATUS:BIT:BCR? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATUS:BIT:BCR value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATUS:BIT:BCR {0|1|X|ZERo|ONE|NOCARE|OFF|ON}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATUS:BIT:BCR?

Info

0, ZERO sets the value to 0.
1, ONE sets the value to 1.
X, NOCARE, DONTCare sets the value to X (‘don’t care’), which is the default.
OFF sets the value to 0.
ON sets the value to 1.

busy `property` ¶

busy: SearchSearchItemTriggerABusMil1553bStatusBitBusy

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATUS:BIT:BUSY command.

Description

This command specifies the status word busy bit value (bit 16) to use when searching on the MIL-STD-1553 status bit field. The default is all X’s (don’t care). The search condition must be set to STATUS.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATUS:BIT:BUSY? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATUS:BIT:BUSY? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATUS:BIT:BUSY value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATUS:BIT:BUSY {0|1|X|ZERo|ONE|NOCARE|OFF|ON}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATUS:BIT:BUSY?

Info

0, ZERO sets the value to 0.
1, ONE sets the value to 1.
X, NOCARE, DONTCare sets the value to X (‘don’t care’), which is the default.
OFF sets the value to 0.
ON sets the value to 1.

dbca `property` ¶

dbca: SearchSearchItemTriggerABusMil1553bStatusBitDbca

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATUS:BIT:DBCA command.

Description

This command specifies the status word dynamic bus control acceptance (DBCA) bit value (bit 18) to use when searching on the MIL-STD-1553 status bit field. The default is all X’s (don’t care). The search condition must be set to STATUS.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATUS:BIT:DBCA? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATUS:BIT:DBCA? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATUS:BIT:DBCA value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATUS:BIT:DBCA {0|1|X|ZERo|ONE|NOCARE|OFF|ON}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATUS:BIT:DBCA?

Info

0, ZERO sets the value to 0.
1, ONE sets the value to 1.
X, NOCARE, DONTCare sets the value to X (‘don’t care’), which is the default.
OFF sets the value to 0.
ON sets the value to 1.

instr `property` ¶

instr: SearchSearchItemTriggerABusMil1553bStatusBitInstr

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATUS:BIT:INSTR command.

Description

This command specifies the status word instrumentation bit value (bit 10) to use when searching on the MIL-STD-1553 status bit field. The default is all X’s (don’t care). The search condition must be set to STATUS.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATUS:BIT:INSTR? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATUS:BIT:INSTR? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATUS:BIT:INSTR value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATUS:BIT:INSTR {0|1|X|ZERo|ONE|NOCARE|OFF|ON}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATUS:BIT:INSTR?

Info

0, ZERO sets the value to 0.
1, ONE sets the value to 1.
X, NOCARE, DONTCare sets the value to X (‘don’t care’), which is the default.
OFF sets the value to 0.
ON sets the value to 1.

me `property` ¶

me: SearchSearchItemTriggerABusMil1553bStatusBitMe

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATUS:BIT:ME command.

Description

This command specifies the status word message error bit value (bit 9) to use when searching on the MIL-STD-1553 status bit field. The default is all X’s (don’t care). The search condition must be set to STATUS.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATUS:BIT:ME? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATUS:BIT:ME? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATUS:BIT:ME value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATUS:BIT:ME {0|1|X|ZERo|ONE|NOCARE|OFF|ON}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATUS:BIT:ME?

Info

0, ZERO sets the value to 0.
1, ONE sets the value to 1.
X, NOCARE, DONTCare sets the value to X (‘don’t care’), which is the default.
OFF sets the value to 0.
ON sets the value to 1.

parity `property` ¶

parity: SearchSearchItemTriggerABusMil1553bStatusBitParity

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATUS:BIT:PARity command.

Description

This command specifies the parity to use when searching on the MIL-STD-1553 status bit field. The default is all X’s (don’t care). The search condition must be set to STATUS.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATUS:BIT:PARity? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATUS:BIT:PARity? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATUS:BIT:PARity value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATUS:BIT:PARity {0|1|X|ZERo|ONE|NOCARE|DONTCare|ON|OFF}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATUS:BIT:PARity?

Info

0, ZERO sets the value to 0.
1, ONE sets the value to 1.
X, NOCARE, DONTCare sets the value to X (‘don’t care’), which is the default.
OFF sets the value to 0.
ON sets the value to 1.

srq `property` ¶

srq: SearchSearchItemTriggerABusMil1553bStatusBitSrq

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATUS:BIT:SRQ command.

Description

This command specifies the status word service request (SRQ) bit value (bit 11) to use when searching on the MIL-STD-1553 status bit field. The default is all X’s (don’t care). The search condition must be set to STATUS.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATUS:BIT:SRQ? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATUS:BIT:SRQ? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATUS:BIT:SRQ value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATUS:BIT:SRQ {0|1|X|ZERo|ONE|NOCARE|OFF|ON}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATUS:BIT:SRQ?

Info

0, ZERO sets the value to 0.
1, ONE sets the value to 1.
X, NOCARE, DONTCare sets the value to X (‘don’t care’), which is the default.
OFF sets the value to 0.
ON sets the value to 1.

subsf `property` ¶

subsf: SearchSearchItemTriggerABusMil1553bStatusBitSubsf

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATUS:BIT:SUBSF command.

Description

This command specifies the status word subsystem flag bit value (bit 17) to use when searching on the MIL-STD-1553 status bit field. The default is all X’s (don’t care). The search condition must be set to STATUS.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATUS:BIT:SUBSF? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATUS:BIT:SUBSF? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATUS:BIT:SUBSF value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATUS:BIT:SUBSF {0|1|X|ZERo|ONE|NOCARE|OFF|ON}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATUS:BIT:SUBSF?

Info

0, ZERO sets the value to 0.
1, ONE sets the value to 1.
X, NOCARE, DONTCare sets the value to X (‘don’t care’), which is the default.
OFF sets the value to 0.
ON sets the value to 1.

tf `property` ¶

tf: SearchSearchItemTriggerABusMil1553bStatusBitTf

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATUS:BIT:TF command.

Description

This command specifies the status word terminal flag bit value (bit 19) to use when searching on the MIL-STD-1553 status bit field. The default is all X’s (don’t care). The search condition must be set to STATUS.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATUS:BIT:TF? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATUS:BIT:TF? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATUS:BIT:TF value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATUS:BIT:TF {0|1|X|ZERo|ONE|NOCARE|OFF|ON}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATUS:BIT:TF?

Info

0, ZERO sets the value to 0.
1, ONE sets the value to 1.
X, NOCARE, DONTCare sets the value to X (‘don’t care’), which is the default.
OFF sets the value to 0.
ON sets the value to 1.

SearchSearchItemTriggerABusMil1553bStatusBitBcr ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATUS:BIT:BCR command.

Description

This command specifies the status word broadcast command received (BCR) bit value (bit 15) to use when searching on the MIL-STD-1553 status bit field. The default is all X’s (don’t care). The search condition must be set to STATUS.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATUS:BIT:BCR? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATUS:BIT:BCR? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATUS:BIT:BCR value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATUS:BIT:BCR {0|1|X|ZERo|ONE|NOCARE|OFF|ON}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATUS:BIT:BCR?

Info

0, ZERO sets the value to 0.
1, ONE sets the value to 1.
X, NOCARE, DONTCare sets the value to X (‘don’t care’), which is the default.
OFF sets the value to 0.
ON sets the value to 1.

SearchSearchItemTriggerABusMil1553bStatusBitBusy ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATUS:BIT:BUSY command.

Description

This command specifies the status word busy bit value (bit 16) to use when searching on the MIL-STD-1553 status bit field. The default is all X’s (don’t care). The search condition must be set to STATUS.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATUS:BIT:BUSY? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATUS:BIT:BUSY? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATUS:BIT:BUSY value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATUS:BIT:BUSY {0|1|X|ZERo|ONE|NOCARE|OFF|ON}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATUS:BIT:BUSY?

Info

0, ZERO sets the value to 0.
1, ONE sets the value to 1.
X, NOCARE, DONTCare sets the value to X (‘don’t care’), which is the default.
OFF sets the value to 0.
ON sets the value to 1.

SearchSearchItemTriggerABusMil1553bStatusBitDbca ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATUS:BIT:DBCA command.

Description

This command specifies the status word dynamic bus control acceptance (DBCA) bit value (bit 18) to use when searching on the MIL-STD-1553 status bit field. The default is all X’s (don’t care). The search condition must be set to STATUS.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATUS:BIT:DBCA? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATUS:BIT:DBCA? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATUS:BIT:DBCA value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATUS:BIT:DBCA {0|1|X|ZERo|ONE|NOCARE|OFF|ON}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATUS:BIT:DBCA?

Info

0, ZERO sets the value to 0.
1, ONE sets the value to 1.
X, NOCARE, DONTCare sets the value to X (‘don’t care’), which is the default.
OFF sets the value to 0.
ON sets the value to 1.

SearchSearchItemTriggerABusMil1553bStatusBitInstr ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATUS:BIT:INSTR command.

Description

This command specifies the status word instrumentation bit value (bit 10) to use when searching on the MIL-STD-1553 status bit field. The default is all X’s (don’t care). The search condition must be set to STATUS.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATUS:BIT:INSTR? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATUS:BIT:INSTR? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATUS:BIT:INSTR value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATUS:BIT:INSTR {0|1|X|ZERo|ONE|NOCARE|OFF|ON}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATUS:BIT:INSTR?

Info

0, ZERO sets the value to 0.
1, ONE sets the value to 1.
X, NOCARE, DONTCare sets the value to X (‘don’t care’), which is the default.
OFF sets the value to 0.
ON sets the value to 1.

SearchSearchItemTriggerABusMil1553bStatusBitMe ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATUS:BIT:ME command.

Description

This command specifies the status word message error bit value (bit 9) to use when searching on the MIL-STD-1553 status bit field. The default is all X’s (don’t care). The search condition must be set to STATUS.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATUS:BIT:ME? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATUS:BIT:ME? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATUS:BIT:ME value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATUS:BIT:ME {0|1|X|ZERo|ONE|NOCARE|OFF|ON}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATUS:BIT:ME?

Info

0, ZERO sets the value to 0.
1, ONE sets the value to 1.
X, NOCARE, DONTCare sets the value to X (‘don’t care’), which is the default.
OFF sets the value to 0.
ON sets the value to 1.

SearchSearchItemTriggerABusMil1553bStatusBitParity ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATUS:BIT:PARity command.

Description

This command specifies the parity to use when searching on the MIL-STD-1553 status bit field. The default is all X’s (don’t care). The search condition must be set to STATUS.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATUS:BIT:PARity? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATUS:BIT:PARity? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATUS:BIT:PARity value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATUS:BIT:PARity {0|1|X|ZERo|ONE|NOCARE|DONTCare|ON|OFF}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATUS:BIT:PARity?

Info

0, ZERO sets the value to 0.
1, ONE sets the value to 1.
X, NOCARE, DONTCare sets the value to X (‘don’t care’), which is the default.
OFF sets the value to 0.
ON sets the value to 1.

SearchSearchItemTriggerABusMil1553bStatusBitSrq ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATUS:BIT:SRQ command.

Description

This command specifies the status word service request (SRQ) bit value (bit 11) to use when searching on the MIL-STD-1553 status bit field. The default is all X’s (don’t care). The search condition must be set to STATUS.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATUS:BIT:SRQ? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATUS:BIT:SRQ? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATUS:BIT:SRQ value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATUS:BIT:SRQ {0|1|X|ZERo|ONE|NOCARE|OFF|ON}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATUS:BIT:SRQ?

Info

0, ZERO sets the value to 0.
1, ONE sets the value to 1.
X, NOCARE, DONTCare sets the value to X (‘don’t care’), which is the default.
OFF sets the value to 0.
ON sets the value to 1.

SearchSearchItemTriggerABusMil1553bStatusBitSubsf ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATUS:BIT:SUBSF command.

Description

This command specifies the status word subsystem flag bit value (bit 17) to use when searching on the MIL-STD-1553 status bit field. The default is all X’s (don’t care). The search condition must be set to STATUS.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATUS:BIT:SUBSF? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATUS:BIT:SUBSF? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATUS:BIT:SUBSF value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATUS:BIT:SUBSF {0|1|X|ZERo|ONE|NOCARE|OFF|ON}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATUS:BIT:SUBSF?

Info

0, ZERO sets the value to 0.
1, ONE sets the value to 1.
X, NOCARE, DONTCare sets the value to X (‘don’t care’), which is the default.
OFF sets the value to 0.
ON sets the value to 1.

SearchSearchItemTriggerABusMil1553bStatusBitTf ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATUS:BIT:TF command.

Description

This command specifies the status word terminal flag bit value (bit 19) to use when searching on the MIL-STD-1553 status bit field. The default is all X’s (don’t care). The search condition must be set to STATUS.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATUS:BIT:TF? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATUS:BIT:TF? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATUS:BIT:TF value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATUS:BIT:TF {0|1|X|ZERo|ONE|NOCARE|OFF|ON}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATUS:BIT:TF?

Info

0, ZERO sets the value to 0.
1, ONE sets the value to 1.
X, NOCARE, DONTCare sets the value to X (‘don’t care’), which is the default.
OFF sets the value to 0.
ON sets the value to 1.

SearchSearchItemTriggerABusMil1553bTime ¶

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:TIME command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:TIME? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:TIME? query and raise an AssertionError if the returned value does not match value.

Properties

.lesslimit: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:TIME:LESSLimit command.
.morelimit: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:TIME:MORELimit command.
.qualifier: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:TIME:QUALifier command.

lesslimit `property` ¶

lesslimit: SearchSearchItemTriggerABusMil1553bTimeLesslimit

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:TIME:LESSLimit command.

Description

This command specifies either the minimum remote terminal response time (RT) limit, in seconds, for the amount of time the terminal has to transmit, or else it specifies the minimum inter-message gap (IMG). The search condition must be set to TIMe

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:TIME:LESSLimit? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:TIME:LESSLimit? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:TIME:LESSLimit value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:TIME:LESSLimit <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:TIME:LESSLimit?

Info

<NR3> is a floating point number that specifies either the minimum remote terminal response time (RT) or the inter-message gap (IMG) in seconds.

morelimit `property` ¶

morelimit: SearchSearchItemTriggerABusMil1553bTimeMorelimit

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:TIME:MORELimit command.

Description

This command specifies either the maximum remote terminal response time (RT) limit, in seconds, for the amount of time the terminal has to transmit, or it specifies the maximum inter-message gap (IMG). The search condition must be set to TIMe,

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:TIME:MORELimit? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:TIME:MORELimit? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:TIME:MORELimit value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:TIME:MORELimit <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:TIME:MORELimit?

Info

<NR3> is a floating point number that specifies either the maximum remote terminal response time (RT) or the inter-message gap (IMG) in seconds.

qualifier `property` ¶

qualifier: SearchSearchItemTriggerABusMil1553bTimeQualifier

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:TIME:QUALifier command.

Description

This command specifies the qualifier to use when triggering on either the remote terminal response time (RT) or the inter-message gap (IMG). The search condition must be set to TIMe,

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:TIME:QUALifier? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:TIME:QUALifier? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:TIME:QUALifier value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:TIME:QUALifier {LESSthan|MOREthan|INrange|OUTrange}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:TIME:QUALifier?

Info

LESSthan sets the Time qualifier to less than minimum.
MOREthan sets the Time qualifier to greater than maximum.
INrange sets the Time qualifier to inside range.
OUTrange sets the Time qualifier to out of range.

SearchSearchItemTriggerABusMil1553bTimeLesslimit ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:TIME:LESSLimit command.

Description

This command specifies either the minimum remote terminal response time (RT) limit, in seconds, for the amount of time the terminal has to transmit, or else it specifies the minimum inter-message gap (IMG). The search condition must be set to TIMe

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:TIME:LESSLimit? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:TIME:LESSLimit? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:TIME:LESSLimit value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:TIME:LESSLimit <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:TIME:LESSLimit?

Info

<NR3> is a floating point number that specifies either the minimum remote terminal response time (RT) or the inter-message gap (IMG) in seconds.

SearchSearchItemTriggerABusMil1553bTimeMorelimit ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:TIME:MORELimit command.

Description

This command specifies either the maximum remote terminal response time (RT) limit, in seconds, for the amount of time the terminal has to transmit, or it specifies the maximum inter-message gap (IMG). The search condition must be set to TIMe,

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:TIME:MORELimit? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:TIME:MORELimit? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:TIME:MORELimit value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:TIME:MORELimit <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:TIME:MORELimit?

Info

<NR3> is a floating point number that specifies either the maximum remote terminal response time (RT) or the inter-message gap (IMG) in seconds.

SearchSearchItemTriggerABusMil1553bTimeQualifier ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:TIME:QUALifier command.

Description

This command specifies the qualifier to use when triggering on either the remote terminal response time (RT) or the inter-message gap (IMG). The search condition must be set to TIMe,

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:TIME:QUALifier? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:TIME:QUALifier? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:TIME:QUALifier value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:TIME:QUALifier {LESSthan|MOREthan|INrange|OUTrange}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:TIME:QUALifier?

Info

LESSthan sets the Time qualifier to less than minimum.
MOREthan sets the Time qualifier to greater than maximum.
INrange sets the Time qualifier to inside range.
OUTrange sets the Time qualifier to out of range.

SearchSearchItemTriggerABusMipicsitwo ¶

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo? query and raise an AssertionError if the returned value does not match value.

Properties

.condition: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:CONDition command.
.dtlong: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:DTLong command.
.dtshort: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:DTShort command.
.error: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:ERRor command.
.escape: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:ESCape command.
.offset: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:OFFset command tree.
.packetdata: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:PACKetdata command tree.
.payload: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:PAYLoad command tree.
.pixel: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:PIXel command tree.
.raw: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:RAW command tree.
.rgb: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:RGB command tree.
.vc: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:VC command.
.warning: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:WARNing command.
.wc: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:WC command tree.
.yuv: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:YUV command tree.

condition `property` ¶

condition: SearchSearchItemTriggerABusMipicsitwoCondition

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:CONDition command.

Description

This command sets or queries the search condition for the specified MIPI CSI2 bus trigger search to determine where to place a mark. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:CONDition? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:CONDition? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:CONDition value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:CONDition {ESCMode|EOT|ERROR|LONG|SHORT|SOT|STOP|WARNing}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:CONDition?

Info

ESCMode specifies the search condition as Escape Mode.
EOT specifies the search condition as End Of Transmission.
ERROR specifies the search condition as Error.
LONG specifies the search condition as Long Packet.
SHORT specifies the search condition as Short Packet.
SOT specifies the search condition as Start Of Transmission.
STOP specifies the search condition as Stop.
WARNing specifies the search condition as Warning.

dtlong `property` ¶

dtlong: SearchSearchItemTriggerABusMipicsitwoDtlong

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:DTLong command.

Description

This command sets or queries the data type for long packets for the specified MIPI CSI2 bus trigger search to determine where to place a mark. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:DTLong? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:DTLong? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:DTLong value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:DTLong {ANY|BLANK|EMBEDded|NULL|RAW10|RAW12|RAW14|RAW<x>|RGB444|RGB555|RGB565|RGB666|RGB888|USER8B1|USER8B2|USER8B3|USER8B4|USER8B5|USER8B6|USER8B7|USER8B8|YUV420B10|YUV420C10|YUV420B8|YUV420C8|YUV420L8|YUV422B10|YUV422B8}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:DTLong?

Info

ANY specifies the data type as Any.
BLANK specifies the data type as Blank.
EMBEDded specifies the data type as Embedded.
NULL specifies the data type as Null.
RAW10 specifies the data type as RAW10.
RAW12 specifies the data type as RAW12.
RAW14 specifies the data type as RAW14.
RAW<x> specifies the data type as RAW6, RAW7, or RAW8. x has a minimum of 6 and a maximum of 8.
RGB444 specifies the data type as RGB444.
RGB555 specifies the data type as RGB555.
RGB565 specifies the data type as RGB565.
RGB666 specifies the data type as RGB666.
RGB888 specifies the data type as RGB888.
USER8B<x> specifies the data type as User 8-bit 1, User 8-bit 2, User 8-bit 3, User 8-bit 4, User 8-bit 5, User 8-bit 6, User 8-bit 7, User 8-bit 8. x has a minimum of 1 and a maximum of 8.
YUV420B10 specifies the data type as YUV420 10-bit.
YUV420C10 specifies the data type as YUV420 10-bit (Chroma Shifted Pixel Sampling).
YUV420B8 specifies the data type as YUV420 8-bit.
YUV420C8 specifies the data type as YUV420 8-bit (Chroma Shifted Pixel Sampling).
YUV420L8 specifies the data type as YUV420 8-bit (legacy).
YUV422B10 specifies the data type as YUV422 10-bit.
YUV422B8 specifies the data type as YUV422 8-bit.

dtshort `property` ¶

dtshort: SearchSearchItemTriggerABusMipicsitwoDtshort

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:DTShort command.

Description

This command sets or queries the data type for short packets for the specified MIPI CSI2 bus trigger search to determine where to place a mark. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:DTShort? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:DTShort? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:DTShort value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:DTShort {ANY|FRAMEEnd|FRAMEStart|GSP1|GSP2|GSP3|GSP4|GSP5|GSP6|GSP7|GSP8|LINEEnd|LINEStart}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:DTShort?

Info

ANY specifies the data type as Any.
FRAMEEnd specifies the data type as Frame End.
FRAMEStart specifies the data type as Frame Start.
GSP<x> specifies the data type as GSP1 to GSP8, where GSP refers to General Short Packet. x has a minimum of 1 and a maximum of 8.
LINEEnd specifies the data type as Line End.
LINEStart specifies the data type as Line Start.

error `property` ¶

error: SearchSearchItemTriggerABusMipicsitwoError

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:ERRor command.

Description

This command sets or queries the error type for the specified MIPI CSI2 bus trigger search to determine where to place a mark. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:ERRor? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:ERRor? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:ERRor value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:ERRor {ANY|CHECKsumerror|ECCError}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:ERRor?

Info

ANY specifies the error type as Any.
CHECKsumerror specifies the error type as CHECKsumerror.
ECCError specifies the error type as ECCError.

escape `property` ¶

escape: SearchSearchItemTriggerABusMipicsitwoEscape

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:ESCape command.

Description

This command sets or queries the Escape command for the specified MIPI CSI2 bus trigger search to determine where to place a mark. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:ESCape? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:ESCape? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:ESCape value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:ESCape {ANY|LPDATA|RESET|ULTRALP}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:ESCape?

Info

ANY specifies the Escape command as Any.
LPDATA specifies the Escape command as Low Power Data Transmission.
RESET specifies the Escape command as Reset.
ULTRALP specifies the Escape command as Ultra Low Power State.

offset `property` ¶

offset: SearchSearchItemTriggerABusMipicsitwoOffset

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:OFFset command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:OFFset? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:OFFset? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:OFFset:VALue command.

packetdata `property` ¶

packetdata: SearchSearchItemTriggerABusMipicsitwoPacketdata

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:PACKetdata command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:PACKetdata? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:PACKetdata? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.format: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:PACKetdata:FORMat command.
.value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:PACKetdata:VALue command.

payload `property` ¶

payload: SearchSearchItemTriggerABusMipicsitwoPayload

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:PAYLoad command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:PAYLoad? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:PAYLoad? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.format: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:PAYLoad:FORMat command.
.size: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:PAYLoad:SIZe command.
.value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:PAYLoad:VALue command.

pixel `property` ¶

pixel: SearchSearchItemTriggerABusMipicsitwoPixel

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:PIXel command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:PIXel? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:PIXel? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:PIXel:VALue command.

raw `property` ¶

raw: SearchSearchItemTriggerABusMipicsitwoRaw

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:RAW command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:RAW? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:RAW? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.qualifier: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:RAW:QUAlifier command.
.value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:RAW:VALue command.

rgb `property` ¶

rgb: SearchSearchItemTriggerABusMipicsitwoRgb

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:RGB command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:RGB? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:RGB? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.blue: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:RGB:BLUe command tree.
.green: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:RGB:GREen command tree.
.red: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:RGB:RED command tree.

vc `property` ¶

vc: SearchSearchItemTriggerABusMipicsitwoVc

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:VC command.

Description

This command sets or queries the Virtual Channel for the specified MIPI CSI2 bus trigger search to determine where to place a mark. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:VC? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:VC? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:VC value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:VC {<NR3>|DONTCare}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:VC?

Info

<NR3> specifies a number from 0 to 3 that represents the virtual channel.
DONTCare specifies the virtual channel as Don’t Care.

warning `property` ¶

warning: SearchSearchItemTriggerABusMipicsitwoWarning

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:WARNing command.

Description

This command sets or queries the warning type for the specified MIPI CSI2 bus trigger search to determine where to place a mark. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:WARNing? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:WARNing? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:WARNing value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:WARNing {ANY|ECCWarn}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:WARNing?

Info

ANY specifies the warning type as Any.
ECCWarn specifies the warning type as ECC Warning.

wc `property` ¶

wc: SearchSearchItemTriggerABusMipicsitwoWc

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:WC command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:WC? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:WC? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:WC:VALue command.

yuv `property` ¶

yuv: SearchSearchItemTriggerABusMipicsitwoYuv

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:YUV command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:YUV? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:YUV? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.u: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:YUV:U command tree.
.v: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:YUV:V command tree.
.y: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:YUV:Y command tree.

SearchSearchItemTriggerABusMipicsitwoCondition ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:CONDition command.

Description

This command sets or queries the search condition for the specified MIPI CSI2 bus trigger search to determine where to place a mark. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:CONDition? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:CONDition? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:CONDition value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:CONDition {ESCMode|EOT|ERROR|LONG|SHORT|SOT|STOP|WARNing}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:CONDition?

Info

ESCMode specifies the search condition as Escape Mode.
EOT specifies the search condition as End Of Transmission.
ERROR specifies the search condition as Error.
LONG specifies the search condition as Long Packet.
SHORT specifies the search condition as Short Packet.
SOT specifies the search condition as Start Of Transmission.
STOP specifies the search condition as Stop.
WARNing specifies the search condition as Warning.

SearchSearchItemTriggerABusMipicsitwoDtlong ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:DTLong command.

Description

This command sets or queries the data type for long packets for the specified MIPI CSI2 bus trigger search to determine where to place a mark. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:DTLong? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:DTLong? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:DTLong value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:DTLong {ANY|BLANK|EMBEDded|NULL|RAW10|RAW12|RAW14|RAW<x>|RGB444|RGB555|RGB565|RGB666|RGB888|USER8B1|USER8B2|USER8B3|USER8B4|USER8B5|USER8B6|USER8B7|USER8B8|YUV420B10|YUV420C10|YUV420B8|YUV420C8|YUV420L8|YUV422B10|YUV422B8}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:DTLong?

Info

ANY specifies the data type as Any.
BLANK specifies the data type as Blank.
EMBEDded specifies the data type as Embedded.
NULL specifies the data type as Null.
RAW10 specifies the data type as RAW10.
RAW12 specifies the data type as RAW12.
RAW14 specifies the data type as RAW14.
RAW<x> specifies the data type as RAW6, RAW7, or RAW8. x has a minimum of 6 and a maximum of 8.
RGB444 specifies the data type as RGB444.
RGB555 specifies the data type as RGB555.
RGB565 specifies the data type as RGB565.
RGB666 specifies the data type as RGB666.
RGB888 specifies the data type as RGB888.
USER8B<x> specifies the data type as User 8-bit 1, User 8-bit 2, User 8-bit 3, User 8-bit 4, User 8-bit 5, User 8-bit 6, User 8-bit 7, User 8-bit 8. x has a minimum of 1 and a maximum of 8.
YUV420B10 specifies the data type as YUV420 10-bit.
YUV420C10 specifies the data type as YUV420 10-bit (Chroma Shifted Pixel Sampling).
YUV420B8 specifies the data type as YUV420 8-bit.
YUV420C8 specifies the data type as YUV420 8-bit (Chroma Shifted Pixel Sampling).
YUV420L8 specifies the data type as YUV420 8-bit (legacy).
YUV422B10 specifies the data type as YUV422 10-bit.
YUV422B8 specifies the data type as YUV422 8-bit.

SearchSearchItemTriggerABusMipicsitwoDtshort ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:DTShort command.

Description

This command sets or queries the data type for short packets for the specified MIPI CSI2 bus trigger search to determine where to place a mark. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:DTShort? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:DTShort? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:DTShort value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:DTShort {ANY|FRAMEEnd|FRAMEStart|GSP1|GSP2|GSP3|GSP4|GSP5|GSP6|GSP7|GSP8|LINEEnd|LINEStart}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:DTShort?

Info

ANY specifies the data type as Any.
FRAMEEnd specifies the data type as Frame End.
FRAMEStart specifies the data type as Frame Start.
GSP<x> specifies the data type as GSP1 to GSP8, where GSP refers to General Short Packet. x has a minimum of 1 and a maximum of 8.
LINEEnd specifies the data type as Line End.
LINEStart specifies the data type as Line Start.

SearchSearchItemTriggerABusMipicsitwoError ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:ERRor command.

Description

This command sets or queries the error type for the specified MIPI CSI2 bus trigger search to determine where to place a mark. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:ERRor? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:ERRor? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:ERRor value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:ERRor {ANY|CHECKsumerror|ECCError}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:ERRor?

Info

ANY specifies the error type as Any.
CHECKsumerror specifies the error type as CHECKsumerror.
ECCError specifies the error type as ECCError.

SearchSearchItemTriggerABusMipicsitwoEscape ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:ESCape command.

Description

This command sets or queries the Escape command for the specified MIPI CSI2 bus trigger search to determine where to place a mark. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:ESCape? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:ESCape? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:ESCape value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:ESCape {ANY|LPDATA|RESET|ULTRALP}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:ESCape?

Info

ANY specifies the Escape command as Any.
LPDATA specifies the Escape command as Low Power Data Transmission.
RESET specifies the Escape command as Reset.
ULTRALP specifies the Escape command as Ultra Low Power State.

SearchSearchItemTriggerABusMipicsitwoOffset ¶

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:OFFset command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:OFFset? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:OFFset? query and raise an AssertionError if the returned value does not match value.

Properties

.value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:OFFset:VALue command.

value `property` ¶

value: SearchSearchItemTriggerABusMipicsitwoOffsetValue

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:OFFset:VALue command.

Description

This command sets or queries the offset value for the specified MIPI CSI2 bus trigger search to determine where to place a mark. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:OFFset:VALue? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:OFFset:VALue? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:OFFset:VALue value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:OFFset:VALue {<NR3>|DONTCare}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:OFFset:VALue?

Info

<NR3> specifies an offset value.
DONTCare specifies the offset value as Don’t Care.

SearchSearchItemTriggerABusMipicsitwoOffsetValue ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:OFFset:VALue command.

Description

This command sets or queries the offset value for the specified MIPI CSI2 bus trigger search to determine where to place a mark. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:OFFset:VALue? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:OFFset:VALue? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:OFFset:VALue value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:OFFset:VALue {<NR3>|DONTCare}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:OFFset:VALue?

Info

<NR3> specifies an offset value.
DONTCare specifies the offset value as Don’t Care.

SearchSearchItemTriggerABusMipicsitwoPacketdata ¶

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:PACKetdata command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:PACKetdata? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:PACKetdata? query and raise an AssertionError if the returned value does not match value.

Properties

.format: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:PACKetdata:FORMat command.
.value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:PACKetdata:VALue command.

format `property` ¶

format: SearchSearchItemTriggerABusMipicsitwoPacketdataFormat

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:PACKetdata:FORMat command.

Description

This command sets or queries the format of the packet data for the specified MIPI CSI2 bus trigger search to determine where to place a mark. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:PACKetdata:FORMat? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:PACKetdata:FORMat? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:PACKetdata:FORMat value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:PACKetdata:FORMat {BINary|HEXadecimal}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:PACKetdata:FORMat?

Info

BINary specifies the data packet format as Binary.
HEXadecimal specifies the data packet format as Hexadecimal.

value `property` ¶

value: SearchSearchItemTriggerABusMipicsitwoPacketdataValue

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:PACKetdata:VALue command.

Description

This command sets or queries the value of the packet data string for the specified MIPI CSI2 bus trigger search to determine where to place a mark. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:PACKetdata:VALue? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:PACKetdata:VALue? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:PACKetdata:VALue value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:PACKetdata:VALue <string>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:PACKetdata:VALue?

Info

<string> specifies the 16-bit packet data string. The valid characters are 0, 1, and X when the format is set to Binary; and 0-9, A-F, and X when the format is set to hexadecimal.

SearchSearchItemTriggerABusMipicsitwoPacketdataFormat ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:PACKetdata:FORMat command.

Description

This command sets or queries the format of the packet data for the specified MIPI CSI2 bus trigger search to determine where to place a mark. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:PACKetdata:FORMat? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:PACKetdata:FORMat? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:PACKetdata:FORMat value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:PACKetdata:FORMat {BINary|HEXadecimal}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:PACKetdata:FORMat?

Info

BINary specifies the data packet format as Binary.
HEXadecimal specifies the data packet format as Hexadecimal.

SearchSearchItemTriggerABusMipicsitwoPacketdataValue ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:PACKetdata:VALue command.

Description

This command sets or queries the value of the packet data string for the specified MIPI CSI2 bus trigger search to determine where to place a mark. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:PACKetdata:VALue? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:PACKetdata:VALue? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:PACKetdata:VALue value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:PACKetdata:VALue <string>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:PACKetdata:VALue?

Info

<string> specifies the 16-bit packet data string. The valid characters are 0, 1, and X when the format is set to Binary; and 0-9, A-F, and X when the format is set to hexadecimal.

SearchSearchItemTriggerABusMipicsitwoPayload ¶

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:PAYLoad command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:PAYLoad? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:PAYLoad? query and raise an AssertionError if the returned value does not match value.

Properties

.format: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:PAYLoad:FORMat command.
.size: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:PAYLoad:SIZe command.
.value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:PAYLoad:VALue command.

format `property` ¶

format: SearchSearchItemTriggerABusMipicsitwoPayloadFormat

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:PAYLoad:FORMat command.

Description

This command sets or queries the generic payload format for the specified MIPI CSI2 bus trigger search to determine where to place a mark. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:PAYLoad:FORMat? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:PAYLoad:FORMat? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:PAYLoad:FORMat value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:PAYLoad:FORMat {BINary|HEXadecimal}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:PAYLoad:FORMat?

Info

BINary specifies the generic payload format as Binary.
HEXadecimal specifies the generic payload format as Hexadecimal.

size `property` ¶

size: SearchSearchItemTriggerABusMipicsitwoPayloadSize

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:PAYLoad:SIZe command.

Description

This command sets or queries the generic payload size of the specified MIPI CSI2 bus trigger search to determine where to place a mark. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:PAYLoad:SIZe? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:PAYLoad:SIZe? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:PAYLoad:SIZe value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:PAYLoad:SIZe <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:PAYLoad:SIZe?

Info

<NR3> specifies a number from 1 to 16 that sets the generic payload size in bytes.

value `property` ¶

value: SearchSearchItemTriggerABusMipicsitwoPayloadValue

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:PAYLoad:VALue command.

Description

This command sets or queries the generic payload value string of the specified MIPI CSI2 bus trigger search to determine where to place a mark. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:PAYLoad:VALue? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:PAYLoad:VALue? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:PAYLoad:VALue value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:PAYLoad:VALue <string>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:PAYLoad:VALue?

Info

<string> specifies the generic payload value. The valid characters are 0, 1, and X for values in binary format; and A-F, 0-9, and X for values in hexadecimal format.

SearchSearchItemTriggerABusMipicsitwoPayloadFormat ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:PAYLoad:FORMat command.

Description

This command sets or queries the generic payload format for the specified MIPI CSI2 bus trigger search to determine where to place a mark. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:PAYLoad:FORMat? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:PAYLoad:FORMat? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:PAYLoad:FORMat value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:PAYLoad:FORMat {BINary|HEXadecimal}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:PAYLoad:FORMat?

Info

BINary specifies the generic payload format as Binary.
HEXadecimal specifies the generic payload format as Hexadecimal.

SearchSearchItemTriggerABusMipicsitwoPayloadSize ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:PAYLoad:SIZe command.

Description

This command sets or queries the generic payload size of the specified MIPI CSI2 bus trigger search to determine where to place a mark. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:PAYLoad:SIZe? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:PAYLoad:SIZe? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:PAYLoad:SIZe value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:PAYLoad:SIZe <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:PAYLoad:SIZe?

Info

<NR3> specifies a number from 1 to 16 that sets the generic payload size in bytes.

SearchSearchItemTriggerABusMipicsitwoPayloadValue ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:PAYLoad:VALue command.

Description

This command sets or queries the generic payload value string of the specified MIPI CSI2 bus trigger search to determine where to place a mark. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:PAYLoad:VALue? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:PAYLoad:VALue? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:PAYLoad:VALue value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:PAYLoad:VALue <string>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:PAYLoad:VALue?

Info

<string> specifies the generic payload value. The valid characters are 0, 1, and X for values in binary format; and A-F, 0-9, and X for values in hexadecimal format.

SearchSearchItemTriggerABusMipicsitwoPixel ¶

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:PIXel command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:PIXel? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:PIXel? query and raise an AssertionError if the returned value does not match value.

Properties

.value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:PIXel:VALue command.

value `property` ¶

value: SearchSearchItemTriggerABusMipicsitwoPixelValue

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:PIXel:VALue command.

Description

This command sets or queries the pixel value for the specified MIPI CSI2 bus trigger search to determine where to place a mark. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:PIXel:VALue? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:PIXel:VALue? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:PIXel:VALue value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:PIXel:VALue {<NR3>|DONTCare}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:PIXel:VALue?

Info

<NR3> specifies a number that represents the pixel value.
DONTCare specifies the pixel value as Don’t Care.

SearchSearchItemTriggerABusMipicsitwoPixelValue ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:PIXel:VALue command.

Description

This command sets or queries the pixel value for the specified MIPI CSI2 bus trigger search to determine where to place a mark. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:PIXel:VALue? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:PIXel:VALue? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:PIXel:VALue value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:PIXel:VALue {<NR3>|DONTCare}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:PIXel:VALue?

Info

<NR3> specifies a number that represents the pixel value.
DONTCare specifies the pixel value as Don’t Care.

SearchSearchItemTriggerABusMipicsitwoRaw ¶

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:RAW command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:RAW? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:RAW? query and raise an AssertionError if the returned value does not match value.

Properties

.qualifier: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:RAW:QUAlifier command.
.value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:RAW:VALue command.

qualifier `property` ¶

qualifier: SearchSearchItemTriggerABusMipicsitwoRawQualifier

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:RAW:QUAlifier command.

Description

This command sets or queries the RAW qualifier for the specified MIPI CSI2 bus trigger search to determine where to place a mark. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:RAW:QUAlifier? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:RAW:QUAlifier? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:RAW:QUAlifier value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:RAW:QUAlifier {EQUal|LESSThan|MOREThan}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:RAW:QUAlifier?

Info

EQUal specifies the RAW qualifier as Equal.
LESSThan specifies the RAW qualifier as Less Than.
MOREThan specifies the RAW qualifier as More Than.

value `property` ¶

value: SearchSearchItemTriggerABusMipicsitwoRawValue

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:RAW:VALue command.

Description

This command sets or queries the RAW value for the specified MIPI CSI2 bus trigger search to determine where to place a mark. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:RAW:VALue? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:RAW:VALue? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:RAW:VALue value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:RAW:VALue {<NR3>|DONTCare}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:RAW:VALue?

Info

<NR3> specifies a number that represents the RAW value.
DONTCare specifies the RAW value as Don’t Care.

SearchSearchItemTriggerABusMipicsitwoRawQualifier ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:RAW:QUAlifier command.

Description

This command sets or queries the RAW qualifier for the specified MIPI CSI2 bus trigger search to determine where to place a mark. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:RAW:QUAlifier? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:RAW:QUAlifier? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:RAW:QUAlifier value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:RAW:QUAlifier {EQUal|LESSThan|MOREThan}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:RAW:QUAlifier?

Info

EQUal specifies the RAW qualifier as Equal.
LESSThan specifies the RAW qualifier as Less Than.
MOREThan specifies the RAW qualifier as More Than.

SearchSearchItemTriggerABusMipicsitwoRawValue ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:RAW:VALue command.

Description

This command sets or queries the RAW value for the specified MIPI CSI2 bus trigger search to determine where to place a mark. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:RAW:VALue? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:RAW:VALue? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:RAW:VALue value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:RAW:VALue {<NR3>|DONTCare}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:RAW:VALue?

Info

<NR3> specifies a number that represents the RAW value.
DONTCare specifies the RAW value as Don’t Care.

SearchSearchItemTriggerABusMipicsitwoRgb ¶

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:RGB command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:RGB? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:RGB? query and raise an AssertionError if the returned value does not match value.

Properties

.blue: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:RGB:BLUe command tree.
.green: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:RGB:GREen command tree.
.red: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:RGB:RED command tree.

blue `property` ¶

blue: SearchSearchItemTriggerABusMipicsitwoRgbBlue

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:RGB:BLUe command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:RGB:BLUe? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:RGB:BLUe? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.qualifier: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:RGB:BLUe:QUAlifier command.
.value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:RGB:BLUe:VALue command.

green `property` ¶

green: SearchSearchItemTriggerABusMipicsitwoRgbGreen

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:RGB:GREen command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:RGB:GREen? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:RGB:GREen? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.qualifier: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:RGB:GREen:QUAlifier command.
.value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:RGB:GREen:VALue command.

red `property` ¶

red: SearchSearchItemTriggerABusMipicsitwoRgbRed

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:RGB:RED command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:RGB:RED? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:RGB:RED? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.qualifier: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:RGB:RED:QUAlifier command.
.value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:RGB:RED:VALue command.

SearchSearchItemTriggerABusMipicsitwoRgbBlue ¶

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:RGB:BLUe command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:RGB:BLUe? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:RGB:BLUe? query and raise an AssertionError if the returned value does not match value.

Properties

.qualifier: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:RGB:BLUe:QUAlifier command.
.value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:RGB:BLUe:VALue command.

qualifier `property` ¶

qualifier: SearchSearchItemTriggerABusMipicsitwoRgbBlueQualifier

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:RGB:BLUe:QUAlifier command.

Description

This command sets or queries the RGB Blue qualifier for the specified MIPI CSI2 bus trigger search to determine where to place a mark. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:RGB:BLUe:QUAlifier? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:RGB:BLUe:QUAlifier? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:RGB:BLUe:QUAlifier value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:RGB:BLUe:QUAlifier {EQUal|LESSThan|MOREThan}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:RGB:BLUe:QUAlifier?

Info

EQUal specifies the qualifier as Equal.
LESSThan specifies the qualifier as Less Than.
MOREThan specifies the qualifier as More Than.

value `property` ¶

value: SearchSearchItemTriggerABusMipicsitwoRgbBlueValue

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:RGB:BLUe:VALue command.

Description

This command sets or queries the RGB Blue value for the specified MIPI CSI2 bus trigger search to determine where to place a mark. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:RGB:BLUe:VALue? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:RGB:BLUe:VALue? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:RGB:BLUe:VALue value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:RGB:BLUe:VALue {<NR3>|DONTCare}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:RGB:BLUe:VALue?

Info

<NR3> specifies a number for the RGB Blue value; the range of the number is dependent on the data type.
DONTCare specifies the RGB Blue value as Don’t Care.

SearchSearchItemTriggerABusMipicsitwoRgbBlueQualifier ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:RGB:BLUe:QUAlifier command.

Description

This command sets or queries the RGB Blue qualifier for the specified MIPI CSI2 bus trigger search to determine where to place a mark. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:RGB:BLUe:QUAlifier? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:RGB:BLUe:QUAlifier? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:RGB:BLUe:QUAlifier value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:RGB:BLUe:QUAlifier {EQUal|LESSThan|MOREThan}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:RGB:BLUe:QUAlifier?

Info

EQUal specifies the qualifier as Equal.
LESSThan specifies the qualifier as Less Than.
MOREThan specifies the qualifier as More Than.

SearchSearchItemTriggerABusMipicsitwoRgbBlueValue ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:RGB:BLUe:VALue command.

Description

This command sets or queries the RGB Blue value for the specified MIPI CSI2 bus trigger search to determine where to place a mark. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:RGB:BLUe:VALue? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:RGB:BLUe:VALue? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:RGB:BLUe:VALue value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:RGB:BLUe:VALue {<NR3>|DONTCare}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:RGB:BLUe:VALue?

Info

<NR3> specifies a number for the RGB Blue value; the range of the number is dependent on the data type.
DONTCare specifies the RGB Blue value as Don’t Care.

SearchSearchItemTriggerABusMipicsitwoRgbGreen ¶

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:RGB:GREen command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:RGB:GREen? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:RGB:GREen? query and raise an AssertionError if the returned value does not match value.

Properties

.qualifier: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:RGB:GREen:QUAlifier command.
.value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:RGB:GREen:VALue command.

qualifier `property` ¶

qualifier: SearchSearchItemTriggerABusMipicsitwoRgbGreenQualifier

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:RGB:GREen:QUAlifier command.

Description

This command sets or queries the RGB Green qualifier for the specified MIPI CSI2 bus trigger search to determine where to place a mark. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:RGB:GREen:QUAlifier? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:RGB:GREen:QUAlifier? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:RGB:GREen:QUAlifier value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:RGB:GREen:QUAlifier {EQUal|LESSThan|MOREThan}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:RGB:GREen:QUAlifier?

Info

EQUal specifies the qualifier as Equal.
LESSThan specifies the qualifier as Less Than.
MOREThan specifies the qualifier as More Than.

value `property` ¶

value: SearchSearchItemTriggerABusMipicsitwoRgbGreenValue

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:RGB:GREen:VALue command.

Description

This command sets or queries the RGB Green value for the specified MIPI CSI2 bus trigger search to determine where to place a mark. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:RGB:GREen:VALue? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:RGB:GREen:VALue? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:RGB:GREen:VALue value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:RGB:GREen:VALue {<NR3>|DONTCare}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:RGB:GREen:VALue?

Info

<NR3> specifies a number for the RGB Green value; the range of the number is dependent on the data type.
DONTCare specifies the RGB Green value as Don’t Care.

SearchSearchItemTriggerABusMipicsitwoRgbGreenQualifier ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:RGB:GREen:QUAlifier command.

Description

This command sets or queries the RGB Green qualifier for the specified MIPI CSI2 bus trigger search to determine where to place a mark. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:RGB:GREen:QUAlifier? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:RGB:GREen:QUAlifier? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:RGB:GREen:QUAlifier value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:RGB:GREen:QUAlifier {EQUal|LESSThan|MOREThan}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:RGB:GREen:QUAlifier?

Info

EQUal specifies the qualifier as Equal.
LESSThan specifies the qualifier as Less Than.
MOREThan specifies the qualifier as More Than.

SearchSearchItemTriggerABusMipicsitwoRgbGreenValue ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:RGB:GREen:VALue command.

Description

This command sets or queries the RGB Green value for the specified MIPI CSI2 bus trigger search to determine where to place a mark. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:RGB:GREen:VALue? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:RGB:GREen:VALue? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:RGB:GREen:VALue value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:RGB:GREen:VALue {<NR3>|DONTCare}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:RGB:GREen:VALue?

Info

<NR3> specifies a number for the RGB Green value; the range of the number is dependent on the data type.
DONTCare specifies the RGB Green value as Don’t Care.

SearchSearchItemTriggerABusMipicsitwoRgbRed ¶

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:RGB:RED command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:RGB:RED? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:RGB:RED? query and raise an AssertionError if the returned value does not match value.

Properties

.qualifier: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:RGB:RED:QUAlifier command.
.value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:RGB:RED:VALue command.

qualifier `property` ¶

qualifier: SearchSearchItemTriggerABusMipicsitwoRgbRedQualifier

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:RGB:RED:QUAlifier command.

Description

This command sets or queries the RGB Red qualifier for the specified MIPI CSI2 bus trigger search to determine where to place a mark. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:RGB:RED:QUAlifier? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:RGB:RED:QUAlifier? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:RGB:RED:QUAlifier value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:RGB:RED:QUAlifier {EQUal|LESSThan|MOREThan}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:RGB:RED:QUAlifier?

Info

EQUal specifies the qualifier as Equal.
LESSThan specifies the qualifier as Less Than.
MOREThan specifies the qualifier as More Than.

value `property` ¶

value: SearchSearchItemTriggerABusMipicsitwoRgbRedValue

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:RGB:RED:VALue command.

Description

This command sets or queries the RGB Red value for the specified MIPI CSI2 bus trigger search to determine where to place a mark. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:RGB:RED:VALue? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:RGB:RED:VALue? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:RGB:RED:VALue value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:RGB:RED:VALue {<NR3>|DONTCare}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:RGB:RED:VALue?

Info

<NR3> specifies a number for the RGB Red value; the range of the number is dependent on the data type.
DONTCare specifies the RGB Red value as Don’t Care.

SearchSearchItemTriggerABusMipicsitwoRgbRedQualifier ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:RGB:RED:QUAlifier command.

Description

This command sets or queries the RGB Red qualifier for the specified MIPI CSI2 bus trigger search to determine where to place a mark. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:RGB:RED:QUAlifier? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:RGB:RED:QUAlifier? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:RGB:RED:QUAlifier value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:RGB:RED:QUAlifier {EQUal|LESSThan|MOREThan}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:RGB:RED:QUAlifier?

Info

EQUal specifies the qualifier as Equal.
LESSThan specifies the qualifier as Less Than.
MOREThan specifies the qualifier as More Than.

SearchSearchItemTriggerABusMipicsitwoRgbRedValue ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:RGB:RED:VALue command.

Description

This command sets or queries the RGB Red value for the specified MIPI CSI2 bus trigger search to determine where to place a mark. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:RGB:RED:VALue? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:RGB:RED:VALue? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:RGB:RED:VALue value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:RGB:RED:VALue {<NR3>|DONTCare}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:RGB:RED:VALue?

Info

<NR3> specifies a number for the RGB Red value; the range of the number is dependent on the data type.
DONTCare specifies the RGB Red value as Don’t Care.

SearchSearchItemTriggerABusMipicsitwoVc ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:VC command.

Description

This command sets or queries the Virtual Channel for the specified MIPI CSI2 bus trigger search to determine where to place a mark. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:VC? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:VC? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:VC value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:VC {<NR3>|DONTCare}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:VC?

Info

<NR3> specifies a number from 0 to 3 that represents the virtual channel.
DONTCare specifies the virtual channel as Don’t Care.

SearchSearchItemTriggerABusMipicsitwoWarning ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:WARNing command.

Description

This command sets or queries the warning type for the specified MIPI CSI2 bus trigger search to determine where to place a mark. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:WARNing? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:WARNing? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:WARNing value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:WARNing {ANY|ECCWarn}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:WARNing?

Info

ANY specifies the warning type as Any.
ECCWarn specifies the warning type as ECC Warning.

SearchSearchItemTriggerABusMipicsitwoWc ¶

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:WC command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:WC? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:WC? query and raise an AssertionError if the returned value does not match value.

Properties

.value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:WC:VALue command.

value `property` ¶

value: SearchSearchItemTriggerABusMipicsitwoWcValue

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:WC:VALue command.

Description

This command sets or queries the word count value for a specified MIPI CSI2 bus trigger search to determine where to place a mark. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:WC:VALue? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:WC:VALue? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:WC:VALue value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:WC:VALue {<NR3>|DONTCare}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:WC:VALue?

Info

<NR3> specifies a number for the word count value.
DONTCare specifies the word count value as Don’t Care.

SearchSearchItemTriggerABusMipicsitwoWcValue ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:WC:VALue command.

Description

This command sets or queries the word count value for a specified MIPI CSI2 bus trigger search to determine where to place a mark. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:WC:VALue? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:WC:VALue? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:WC:VALue value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:WC:VALue {<NR3>|DONTCare}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:WC:VALue?

Info

<NR3> specifies a number for the word count value.
DONTCare specifies the word count value as Don’t Care.

SearchSearchItemTriggerABusMipicsitwoYuv ¶

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:YUV command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:YUV? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:YUV? query and raise an AssertionError if the returned value does not match value.

Properties

.u: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:YUV:U command tree.
.v: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:YUV:V command tree.
.y: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:YUV:Y command tree.

u `property` ¶

u: SearchSearchItemTriggerABusMipicsitwoYuvU

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:YUV:U command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:YUV:U? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:YUV:U? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.qualifier: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:YUV:U:QUAlifier command.
.value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:YUV:U:VALue command.

v `property` ¶

v: SearchSearchItemTriggerABusMipicsitwoYuvV

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:YUV:V command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:YUV:V? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:YUV:V? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.qualifier: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:YUV:V:QUAlifier command.
.value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:YUV:V:VALue command.

y `property` ¶

y: SearchSearchItemTriggerABusMipicsitwoYuvY

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:YUV:Y command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:YUV:Y? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:YUV:Y? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.qualifier: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:YUV:Y:QUAlifier command.
.value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:YUV:Y:VALue command.

SearchSearchItemTriggerABusMipicsitwoYuvU ¶

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:YUV:U command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:YUV:U? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:YUV:U? query and raise an AssertionError if the returned value does not match value.

Properties

.qualifier: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:YUV:U:QUAlifier command.
.value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:YUV:U:VALue command.

qualifier `property` ¶

qualifier: SearchSearchItemTriggerABusMipicsitwoYuvUQualifier

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:YUV:U:QUAlifier command.

Description

This command sets or queries the YUV U qualifier for the specified MIPI CSI2 bus trigger search to determine where to place a mark. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:YUV:U:QUAlifier? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:YUV:U:QUAlifier? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:YUV:U:QUAlifier value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:YUV:U:QUAlifier {EQUal|LESSThan|MOREThan}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:YUV:U:QUAlifier?

Info

EQUal specifies the qualifier as Equal.
LESSThan specifies the qualifier as Less Than.
MOREThan specifies the qualifier as More Than.

value `property` ¶

value: SearchSearchItemTriggerABusMipicsitwoYuvUValue

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:YUV:U:VALue command.

Description

This command sets or queries the YUV U value for the specified MIPI CSI2 bus trigger search to determine where to place a mark. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:YUV:U:VALue? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:YUV:U:VALue? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:YUV:U:VALue value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:YUV:U:VALue {<NR3>|DONTCare}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:YUV:U:VALue?

Info

<NR3> specifies a number for the YUV U value; the range of the number is dependent on the data type.
DONTCare specifies the YUV U value as Don’t Care.

SearchSearchItemTriggerABusMipicsitwoYuvUQualifier ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:YUV:U:QUAlifier command.

Description

This command sets or queries the YUV U qualifier for the specified MIPI CSI2 bus trigger search to determine where to place a mark. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:YUV:U:QUAlifier? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:YUV:U:QUAlifier? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:YUV:U:QUAlifier value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:YUV:U:QUAlifier {EQUal|LESSThan|MOREThan}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:YUV:U:QUAlifier?

Info

EQUal specifies the qualifier as Equal.
LESSThan specifies the qualifier as Less Than.
MOREThan specifies the qualifier as More Than.

SearchSearchItemTriggerABusMipicsitwoYuvUValue ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:YUV:U:VALue command.

Description

This command sets or queries the YUV U value for the specified MIPI CSI2 bus trigger search to determine where to place a mark. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:YUV:U:VALue? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:YUV:U:VALue? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:YUV:U:VALue value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:YUV:U:VALue {<NR3>|DONTCare}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:YUV:U:VALue?

Info

<NR3> specifies a number for the YUV U value; the range of the number is dependent on the data type.
DONTCare specifies the YUV U value as Don’t Care.

SearchSearchItemTriggerABusMipicsitwoYuvV ¶

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:YUV:V command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:YUV:V? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:YUV:V? query and raise an AssertionError if the returned value does not match value.

Properties

.qualifier: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:YUV:V:QUAlifier command.
.value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:YUV:V:VALue command.

qualifier `property` ¶

qualifier: SearchSearchItemTriggerABusMipicsitwoYuvVQualifier

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:YUV:V:QUAlifier command.

Description

This command sets or queries the YUV V qualifier for the specified MIPI CSI2 bus trigger search to determine where to place a mark. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:YUV:V:QUAlifier? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:YUV:V:QUAlifier? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:YUV:V:QUAlifier value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:YUV:V:QUAlifier {EQUal|LESSThan|MOREThan}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:YUV:V:QUAlifier?

Info

EQUal specifies the qualifier as Equal.
LESSThan specifies the qualifier as Less Than.
MOREThan specifies the qualifier as More Than.

value `property` ¶

value: SearchSearchItemTriggerABusMipicsitwoYuvVValue

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:YUV:V:VALue command.

Description

This command sets or queries the YUV V value for the specified MIPI CSI2 bus trigger search to determine where to place a mark. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:YUV:V:VALue? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:YUV:V:VALue? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:YUV:V:VALue value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:YUV:V:VALue {<NR3>|DONTCare}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:YUV:V:VALue?

Info

<NR3> specifies a number for the YUV V value; the range of the number is dependent on the data type.
DONTCare specifies the YUV V value as Don’t Care.

SearchSearchItemTriggerABusMipicsitwoYuvVQualifier ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:YUV:V:QUAlifier command.

Description

This command sets or queries the YUV V qualifier for the specified MIPI CSI2 bus trigger search to determine where to place a mark. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:YUV:V:QUAlifier? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:YUV:V:QUAlifier? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:YUV:V:QUAlifier value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:YUV:V:QUAlifier {EQUal|LESSThan|MOREThan}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:YUV:V:QUAlifier?

Info

EQUal specifies the qualifier as Equal.
LESSThan specifies the qualifier as Less Than.
MOREThan specifies the qualifier as More Than.

SearchSearchItemTriggerABusMipicsitwoYuvVValue ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:YUV:V:VALue command.

Description

This command sets or queries the YUV V value for the specified MIPI CSI2 bus trigger search to determine where to place a mark. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:YUV:V:VALue? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:YUV:V:VALue? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:YUV:V:VALue value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:YUV:V:VALue {<NR3>|DONTCare}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:YUV:V:VALue?

Info

<NR3> specifies a number for the YUV V value; the range of the number is dependent on the data type.
DONTCare specifies the YUV V value as Don’t Care.

SearchSearchItemTriggerABusMipicsitwoYuvY ¶

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:YUV:Y command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:YUV:Y? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:YUV:Y? query and raise an AssertionError if the returned value does not match value.

Properties

.qualifier: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:YUV:Y:QUAlifier command.
.value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:YUV:Y:VALue command.

qualifier `property` ¶

qualifier: SearchSearchItemTriggerABusMipicsitwoYuvYQualifier

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:YUV:Y:QUAlifier command.

Description

This command sets or queries the YUV Y qualifier for the specified MIPI CSI2 bus trigger search to determine where to place a mark. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:YUV:Y:QUAlifier? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:YUV:Y:QUAlifier? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:YUV:Y:QUAlifier value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:YUV:Y:QUAlifier {EQUal|LESSThan|MOREThan}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:YUV:Y:QUAlifier?

Info

EQUal specifies the qualifier as Equal.
LESSThan specifies the qualifier as Less Than.
MOREThan specifies the qualifier as More Than.

value `property` ¶

value: SearchSearchItemTriggerABusMipicsitwoYuvYValue

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:YUV:Y:VALue command.

Description

This command sets or queries the YUV Y value for the specified MIPI CSI2 bus trigger search to determine where to place a mark. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:YUV:Y:VALue? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:YUV:Y:VALue? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:YUV:Y:VALue value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:YUV:Y:VALue {<NR3>|DONTCare}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:YUV:Y:VALue?

Info

<NR3> specifies a number for the YUV Y value; the range of the number is dependent on the data type.
DONTCare specifies the YUV Y value as Don’t Care.

SearchSearchItemTriggerABusMipicsitwoYuvYQualifier ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:YUV:Y:QUAlifier command.

Description

This command sets or queries the YUV Y qualifier for the specified MIPI CSI2 bus trigger search to determine where to place a mark. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:YUV:Y:QUAlifier? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:YUV:Y:QUAlifier? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:YUV:Y:QUAlifier value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:YUV:Y:QUAlifier {EQUal|LESSThan|MOREThan}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:YUV:Y:QUAlifier?

Info

EQUal specifies the qualifier as Equal.
LESSThan specifies the qualifier as Less Than.
MOREThan specifies the qualifier as More Than.

SearchSearchItemTriggerABusMipicsitwoYuvYValue ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:YUV:Y:VALue command.

Description

This command sets or queries the YUV Y value for the specified MIPI CSI2 bus trigger search to determine where to place a mark. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:YUV:Y:VALue? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:YUV:Y:VALue? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:YUV:Y:VALue value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:YUV:Y:VALue {<NR3>|DONTCare}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPICSITWo:YUV:Y:VALue?

Info

<NR3> specifies a number for the YUV Y value; the range of the number is dependent on the data type.
DONTCare specifies the YUV Y value as Don’t Care.

SearchSearchItemTriggerABusMipidsione ¶

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne? query and raise an AssertionError if the returned value does not match value.

Properties

.ackerrreport: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:ACKERRreport command.
.condition: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:CONDition command.
.direction: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:DIRection command.
.dtlong: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:DTLong command.
.dtshort: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:DTShort command.
.error: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:ERRor command.
.escape: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:ESCape command.
.offset: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:OFFset command tree.
.packetdata: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:PACKetdata command tree.
.payload: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:PAYLoad command tree.
.pixel: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:PIXel command tree.
.rgb: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:RGB command tree.
.vc: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:VC command.
.warning: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:WARNing command.
.wc: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:WC command tree.
.ycbcr: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:YCBCR command tree.

ackerrreport `property` ¶

ackerrreport: SearchSearchItemTriggerABusMipidsioneAckerrreport

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:ACKERRreport command.

Description

This command sets or queries the Acknowledge and Error Report for the specified MIPI DSI1 bus trigger search to determine where to place a mark. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:ACKERRreport? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:ACKERRreport? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:ACKERRreport value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:ACKERRreport {ANY|CHKSUMError|CONTention|DSINR|DSIViolation|DSIVC|ECCMBError|ECCSBError|EOTSync|ESCMODEError|FCE|HSRTError|INVALID|LPTSError|SOTError|SOTSync}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:ACKERRreport?

Info

ANY matches any error condition.
CHKSUMError Checksum Error.
CONTention is the contention detected.
DSINR DSI Data Type Not Recognized.
DSIViolation DSI Protocol Violation.
DSIVC DSI Virtual Channel ID Invalid.
ECCMBError ECC Error, Multi-bit.
ECCSBError ECC Error, Single-bit.
EOTSync End of Transmission Sync.
ESCMODEError Escape Mode Entry Command Error.
FCE False Control Error.
HSRTError High-Speed Receive Timeout Error.
INVALID Invalid Transmission Length.
LPTSError Low-Power Transmit Sync Error.
SOTError Start of Transmission Error.
SOTSync Start of Transmission Sync Error.

condition `property` ¶

condition: SearchSearchItemTriggerABusMipidsioneCondition

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:CONDition command.

Description

This command sets or queries the search condition for the specified MIPI DSI1 bus trigger search to determine where to place a mark. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:CONDition? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:CONDition? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:CONDition value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:CONDition {ESCMode|BTA|EOT|ERROR|LONG|SHORT|SOT|STOP|WA}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:CONDition?

Info

ESCMode specifies the search condition as Escape Mode.
BTA specifies the search condition as Bus Turnaround.
EOT specifies the search condition as End of Transmission.
ERROR specifies the search condition as Error.
LONG specifies the search condition as Long Packet.
SHORT specifies the search condition as Short Packet.
SOT specifies the search condition as Start of Transmission.
STOP specifies the search condition as Low Power Stop State.

direction `property` ¶

direction: SearchSearchItemTriggerABusMipidsioneDirection

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:DIRection command.

Description

This command sets or queries the direction for the specified MIPI DSI1 bus trigger search to determine where to place a mark. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:DIRection? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:DIRection? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:DIRection value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:DIRection {FORWard|REVErse|ANY}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:DIRection?

Info

FORWard specifies the direction as Forward.
REVErse specifies the direction as Reverse.
ANY specifies the direction as Any.

dtlong `property` ¶

dtlong: SearchSearchItemTriggerABusMipidsioneDtlong

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:DTLong command.

Description

This command sets or queries the data type for long packets for the specified MIPI DSI1 bus trigger search to determine where to place a mark. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:DTLong? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:DTLong? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:DTLong value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:DTLong {ANY|BLANK|DCSLONGRead|DCSLONGWrite|GLONGRead|GLONGWrite|LPS666|NULL|PPS565|PPS666|PPS888|PPS101010|PPS121212|YCBCR12|YCBCR16|YCBCR20|YCBCR24}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:DTLong?

Info

ANY specifies the data type as Any.
BLANK specifies the data type as Blank.
DCSLONGRead specifies the data type as DCS Long Read.
DCSLONGWrite specifies the data type as DCS Long Write.
GLONGRead specifies the data type as General Long Read Response.
GLONGWrite specifies the data type as General Long Write.
LPS666 specifies the data type as Loosely Packed 18-bit RGB, 6-6-6.
NULL specifies the data type as Null.
PPS565 specifies the data type as 16-bit RGB, 5-6-5.
PPS666 specifies the data type as 18-bit RGB, 6-6-6.
PPS888 specifies the data type as 24-bit RGB, 8-8-8.
PPS101010 specifies the data type as 30-bit RGB, 10-10-10.
PPS121212 specifies the data type as 36-bit RGB, 12-12-12.
YCBCR12 specifies the data type as 12-bit YCbCr, 4:2:0.
YCBCR16 specifies the data type as 16-bit YCbCr, 4:2:2.
YCBCR20 specifies the data type as 20-bit YCbCr, 4:2:2.
YCBCR24 specifies the data type as 24-bit YCbCr, 4:2:2.

dtshort `property` ¶

dtshort: SearchSearchItemTriggerABusMipidsioneDtshort

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:DTShort command.

Description

This command sets or queries the data type for short packets for the MIPI DSI1 bus trigger search to determine where to place a mark. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:DTShort? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:DTShort? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:DTShort value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:DTShort {ACKErrorreport|ANY|COLOROFF|COLORON|DCSR|DCSSRR1|DCSRR2|DCSSW<x>|EOT|GR<x>|GSRR<x>|GSW<x>|HSYNCEnd|HSYNCStart|MAXRETsize|SHUTDown|TURNON|VSYNCEnd|VSYNCStart}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:DTShort?

Info

ACKErrorreport Acknowledge and Error report.
ANY matches any data type.
COLOROFF Color Mode Off.
COLORON Color Mode On.
DCSR DCS Read.
DCSSRR1 DCS Short Read Response, 1 byte.
DCSRR2 DCS Short Read Response, 2 bytes.
DCSSW0 DCS Short Write, no parameters.
DCSSW1 DCS Short Write, 1 parameter.
EOT End of Transmission.
GR0 Generic Read, no parameters.
GR1 Generic Read, one parameter.
GR2 Generic Read, two parameters.
GSRR1 Generic Short Read Response, 1 byte.
GSRR2 Generic Short Read Response, 2 bytes.
GSW0 Generic Short Write, no parameters.
GSW1 Generic Short Write, one parameters.
GSW2 Generic Short Write, two parameters.
HSYNCEnd HSync End.
HSYNCStart HSync Start.
MAXRETsize Set Maximum Return Packet Size.
SHUTDown Shut Down Peripheral.
TURNON Turn On Peripheral.
VSYNCEnd VSync End.
VSYNCStart VSync Start.

error `property` ¶

error: SearchSearchItemTriggerABusMipidsioneError

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:ERRor command.

Description

This command sets or queries the error type for the specified MIPI DSI1 bus trigger search to determine where to place a mark. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:ERRor? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:ERRor? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:ERRor value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:ERRor {ANY|CHECKsumerror|ECCError}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:ERRor?

Info

ANY specifies the error type as Any.
CHECKsumerror specifies the error type as Check Sum Error.
ECCError specifies the error type as ECC Error.

escape `property` ¶

escape: SearchSearchItemTriggerABusMipidsioneEscape

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:ESCape command.

Description

This command sets or queries the Escape command for the specified MIPI DSI1 bus trigger search to determine where to place a mark. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:ESCape? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:ESCape? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:ESCape value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:ESCape {ACK|LPDATA|RESET|ANY|TEAR|ULTRALP}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:ESCape?

Info

ACK specifies the Escape command as Ack (positive acknowledgement).
LPDATA specifies the Escape command as Low Power Data Transmission.
RESET specifies the Escape command as Reset.
ANY specifies the Escape command as Any.
TEAR specifies the Escape command as Tearing Effect.
ULTRALP specifies the Escape command as Ultra Low Power State.

offset `property` ¶

offset: SearchSearchItemTriggerABusMipidsioneOffset

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:OFFset command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:OFFset? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:OFFset? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:OFFset:VALue command.

packetdata `property` ¶

packetdata: SearchSearchItemTriggerABusMipidsionePacketdata

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:PACKetdata command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:PACKetdata? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:PACKetdata? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.format: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:PACKetdata:FORMat command.
.valueone: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:PACKetdata:VALUEOne command.
.valuetwo: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:PACKetdata:VALUETwo command.

payload `property` ¶

payload: SearchSearchItemTriggerABusMipidsionePayload

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:PAYLoad command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:PAYLoad? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:PAYLoad? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.format: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:PAYLoad:FORMat command.
.size: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:PAYLoad:SIZe command.
.value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:PAYLoad:VALue command.

pixel `property` ¶

pixel: SearchSearchItemTriggerABusMipidsionePixel

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:PIXel command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:PIXel? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:PIXel? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:PIXel:VALue command.

rgb `property` ¶

rgb: SearchSearchItemTriggerABusMipidsioneRgb

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:RGB command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:RGB? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:RGB? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.blue: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:RGB:BLUe command tree.
.green: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:RGB:GREen command tree.
.red: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:RGB:RED command tree.

vc `property` ¶

vc: SearchSearchItemTriggerABusMipidsioneVc

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:VC command.

Description

This command sets or queries the Virtual Channel for the specified MIPI DSI1 bus trigger search to determine where to place a mark. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:VC? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:VC? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:VC value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:VC {<NR3>|DONTCare}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:VC?

Info

<NR3> specifies a Virtual Channel from 0 to 3.
DONTCare specifies the Virtual Channel as Don’t Care.

warning `property` ¶

warning: SearchSearchItemTriggerABusMipidsioneWarning

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:WARNing command.

Description

This command sets or queries the warning type for a specified MIPI DSI1 bus trigger search to determine where to place a mark. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:WARNing? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:WARNing? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:WARNing value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:WARNing {ANY|ECCWarn}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:WARNing?

Info

ANY specifies the warning type as Any.
ECCWarn specifies the warning type as ECCWarn.

wc `property` ¶

wc: SearchSearchItemTriggerABusMipidsioneWc

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:WC command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:WC? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:WC? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:WC:VALue command.

ycbcr `property` ¶

ycbcr: SearchSearchItemTriggerABusMipidsioneYcbcr

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:YCBCR command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:YCBCR? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:YCBCR? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.cb: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:YCBCR:CB command tree.
.cr: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:YCBCR:CR command tree.
.y: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:YCBCR:Y command tree.

SearchSearchItemTriggerABusMipidsioneAckerrreport ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:ACKERRreport command.

Description

This command sets or queries the Acknowledge and Error Report for the specified MIPI DSI1 bus trigger search to determine where to place a mark. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:ACKERRreport? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:ACKERRreport? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:ACKERRreport value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:ACKERRreport {ANY|CHKSUMError|CONTention|DSINR|DSIViolation|DSIVC|ECCMBError|ECCSBError|EOTSync|ESCMODEError|FCE|HSRTError|INVALID|LPTSError|SOTError|SOTSync}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:ACKERRreport?

Info

ANY matches any error condition.
CHKSUMError Checksum Error.
CONTention is the contention detected.
DSINR DSI Data Type Not Recognized.
DSIViolation DSI Protocol Violation.
DSIVC DSI Virtual Channel ID Invalid.
ECCMBError ECC Error, Multi-bit.
ECCSBError ECC Error, Single-bit.
EOTSync End of Transmission Sync.
ESCMODEError Escape Mode Entry Command Error.
FCE False Control Error.
HSRTError High-Speed Receive Timeout Error.
INVALID Invalid Transmission Length.
LPTSError Low-Power Transmit Sync Error.
SOTError Start of Transmission Error.
SOTSync Start of Transmission Sync Error.

SearchSearchItemTriggerABusMipidsioneCondition ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:CONDition command.

Description

This command sets or queries the search condition for the specified MIPI DSI1 bus trigger search to determine where to place a mark. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:CONDition? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:CONDition? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:CONDition value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:CONDition {ESCMode|BTA|EOT|ERROR|LONG|SHORT|SOT|STOP|WA}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:CONDition?

Info

ESCMode specifies the search condition as Escape Mode.
BTA specifies the search condition as Bus Turnaround.
EOT specifies the search condition as End of Transmission.
ERROR specifies the search condition as Error.
LONG specifies the search condition as Long Packet.
SHORT specifies the search condition as Short Packet.
SOT specifies the search condition as Start of Transmission.
STOP specifies the search condition as Low Power Stop State.

SearchSearchItemTriggerABusMipidsioneDirection ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:DIRection command.

Description

This command sets or queries the direction for the specified MIPI DSI1 bus trigger search to determine where to place a mark. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:DIRection? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:DIRection? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:DIRection value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:DIRection {FORWard|REVErse|ANY}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:DIRection?

Info

FORWard specifies the direction as Forward.
REVErse specifies the direction as Reverse.
ANY specifies the direction as Any.

SearchSearchItemTriggerABusMipidsioneDtlong ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:DTLong command.

Description

This command sets or queries the data type for long packets for the specified MIPI DSI1 bus trigger search to determine where to place a mark. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:DTLong? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:DTLong? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:DTLong value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:DTLong {ANY|BLANK|DCSLONGRead|DCSLONGWrite|GLONGRead|GLONGWrite|LPS666|NULL|PPS565|PPS666|PPS888|PPS101010|PPS121212|YCBCR12|YCBCR16|YCBCR20|YCBCR24}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:DTLong?

Info

ANY specifies the data type as Any.
BLANK specifies the data type as Blank.
DCSLONGRead specifies the data type as DCS Long Read.
DCSLONGWrite specifies the data type as DCS Long Write.
GLONGRead specifies the data type as General Long Read Response.
GLONGWrite specifies the data type as General Long Write.
LPS666 specifies the data type as Loosely Packed 18-bit RGB, 6-6-6.
NULL specifies the data type as Null.
PPS565 specifies the data type as 16-bit RGB, 5-6-5.
PPS666 specifies the data type as 18-bit RGB, 6-6-6.
PPS888 specifies the data type as 24-bit RGB, 8-8-8.
PPS101010 specifies the data type as 30-bit RGB, 10-10-10.
PPS121212 specifies the data type as 36-bit RGB, 12-12-12.
YCBCR12 specifies the data type as 12-bit YCbCr, 4:2:0.
YCBCR16 specifies the data type as 16-bit YCbCr, 4:2:2.
YCBCR20 specifies the data type as 20-bit YCbCr, 4:2:2.
YCBCR24 specifies the data type as 24-bit YCbCr, 4:2:2.

SearchSearchItemTriggerABusMipidsioneDtshort ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:DTShort command.

Description

This command sets or queries the data type for short packets for the MIPI DSI1 bus trigger search to determine where to place a mark. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:DTShort? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:DTShort? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:DTShort value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:DTShort {ACKErrorreport|ANY|COLOROFF|COLORON|DCSR|DCSSRR1|DCSRR2|DCSSW<x>|EOT|GR<x>|GSRR<x>|GSW<x>|HSYNCEnd|HSYNCStart|MAXRETsize|SHUTDown|TURNON|VSYNCEnd|VSYNCStart}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:DTShort?

Info

ACKErrorreport Acknowledge and Error report.
ANY matches any data type.
COLOROFF Color Mode Off.
COLORON Color Mode On.
DCSR DCS Read.
DCSSRR1 DCS Short Read Response, 1 byte.
DCSRR2 DCS Short Read Response, 2 bytes.
DCSSW0 DCS Short Write, no parameters.
DCSSW1 DCS Short Write, 1 parameter.
EOT End of Transmission.
GR0 Generic Read, no parameters.
GR1 Generic Read, one parameter.
GR2 Generic Read, two parameters.
GSRR1 Generic Short Read Response, 1 byte.
GSRR2 Generic Short Read Response, 2 bytes.
GSW0 Generic Short Write, no parameters.
GSW1 Generic Short Write, one parameters.
GSW2 Generic Short Write, two parameters.
HSYNCEnd HSync End.
HSYNCStart HSync Start.
MAXRETsize Set Maximum Return Packet Size.
SHUTDown Shut Down Peripheral.
TURNON Turn On Peripheral.
VSYNCEnd VSync End.
VSYNCStart VSync Start.

SearchSearchItemTriggerABusMipidsioneError ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:ERRor command.

Description

This command sets or queries the error type for the specified MIPI DSI1 bus trigger search to determine where to place a mark. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:ERRor? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:ERRor? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:ERRor value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:ERRor {ANY|CHECKsumerror|ECCError}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:ERRor?

Info

ANY specifies the error type as Any.
CHECKsumerror specifies the error type as Check Sum Error.
ECCError specifies the error type as ECC Error.

SearchSearchItemTriggerABusMipidsioneEscape ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:ESCape command.

Description

This command sets or queries the Escape command for the specified MIPI DSI1 bus trigger search to determine where to place a mark. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:ESCape? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:ESCape? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:ESCape value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:ESCape {ACK|LPDATA|RESET|ANY|TEAR|ULTRALP}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:ESCape?

Info

ACK specifies the Escape command as Ack (positive acknowledgement).
LPDATA specifies the Escape command as Low Power Data Transmission.
RESET specifies the Escape command as Reset.
ANY specifies the Escape command as Any.
TEAR specifies the Escape command as Tearing Effect.
ULTRALP specifies the Escape command as Ultra Low Power State.

SearchSearchItemTriggerABusMipidsioneOffset ¶

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:OFFset command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:OFFset? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:OFFset? query and raise an AssertionError if the returned value does not match value.

Properties

.value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:OFFset:VALue command.

value `property` ¶

value: SearchSearchItemTriggerABusMipidsioneOffsetValue

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:OFFset:VALue command.

Description

This command sets or queries the offset value for the specified MIPI DSI1 bus trigger search to determine where to place a mark. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:OFFset:VALue? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:OFFset:VALue? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:OFFset:VALue value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:OFFset:VALue {<NR3>|DONTCare}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:OFFset:VALue?

Info

<NR3> specifies an offset value.
DONTCare specifies the offset value as Don’t Care.

SearchSearchItemTriggerABusMipidsioneOffsetValue ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:OFFset:VALue command.

Description

This command sets or queries the offset value for the specified MIPI DSI1 bus trigger search to determine where to place a mark. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:OFFset:VALue? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:OFFset:VALue? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:OFFset:VALue value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:OFFset:VALue {<NR3>|DONTCare}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:OFFset:VALue?

Info

<NR3> specifies an offset value.
DONTCare specifies the offset value as Don’t Care.

SearchSearchItemTriggerABusMipidsionePacketdata ¶

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:PACKetdata command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:PACKetdata? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:PACKetdata? query and raise an AssertionError if the returned value does not match value.

Properties

.format: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:PACKetdata:FORMat command.
.valueone: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:PACKetdata:VALUEOne command.
.valuetwo: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:PACKetdata:VALUETwo command.

format `property` ¶

format: SearchSearchItemTriggerABusMipidsionePacketdataFormat

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:PACKetdata:FORMat command.

Description

This command sets or queries the format of the packet data for the specified MIPI DSI1 bus trigger search to determine where to place a mark. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:PACKetdata:FORMat? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:PACKetdata:FORMat? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:PACKetdata:FORMat value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:PACKetdata:FORMat {BINary|HEXadecimal}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:PACKetdata:FORMat?

Info

BINary specifies the format of the packet data as Binary.
HEXadecimal specifies the format of the packet data as Hexadecimal.

valueone `property` ¶

valueone: SearchSearchItemTriggerABusMipidsionePacketdataValueone

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:PACKetdata:VALUEOne command.

Description

This command sets or queries the value of the first byte (8 bits) of a packet data string for the specified MIPI DSI1 bus trigger search to determine where to place a mark. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:PACKetdata:VALUEOne? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:PACKetdata:VALUEOne? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:PACKetdata:VALUEOne value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:PACKetdata:VALUEOne <string>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:PACKetdata:VALUEOne?

Info

<string> specifies the first byte of the packet data string. The valid characters are 0, 1, and X when the format is set to binary; and 0-9, A-F, and X when the format is set to hexadecimal.

valuetwo `property` ¶

valuetwo: SearchSearchItemTriggerABusMipidsionePacketdataValuetwo

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:PACKetdata:VALUETwo command.

Description

This command sets or queries the value of the second byte (8 bits) of a packet data string for the specified MIPI DSI1 bus trigger search to determine where to place a mark. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:PACKetdata:VALUETwo? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:PACKetdata:VALUETwo? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:PACKetdata:VALUETwo value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:PACKetdata:VALUETwo <string>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:PACKetdata:VALUETwo?

Info

<string> specifies the second byte of a packet data string. The valid characters are 0, 1, and X when the format is set to binary; and 0-9, A-F, and X when the format is set to hexadecimal.

SearchSearchItemTriggerABusMipidsionePacketdataFormat ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:PACKetdata:FORMat command.

Description

This command sets or queries the format of the packet data for the specified MIPI DSI1 bus trigger search to determine where to place a mark. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:PACKetdata:FORMat? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:PACKetdata:FORMat? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:PACKetdata:FORMat value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:PACKetdata:FORMat {BINary|HEXadecimal}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:PACKetdata:FORMat?

Info

BINary specifies the format of the packet data as Binary.
HEXadecimal specifies the format of the packet data as Hexadecimal.

SearchSearchItemTriggerABusMipidsionePacketdataValueone ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:PACKetdata:VALUEOne command.

Description

This command sets or queries the value of the first byte (8 bits) of a packet data string for the specified MIPI DSI1 bus trigger search to determine where to place a mark. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:PACKetdata:VALUEOne? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:PACKetdata:VALUEOne? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:PACKetdata:VALUEOne value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:PACKetdata:VALUEOne <string>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:PACKetdata:VALUEOne?

Info

<string> specifies the first byte of the packet data string. The valid characters are 0, 1, and X when the format is set to binary; and 0-9, A-F, and X when the format is set to hexadecimal.

SearchSearchItemTriggerABusMipidsionePacketdataValuetwo ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:PACKetdata:VALUETwo command.

Description

This command sets or queries the value of the second byte (8 bits) of a packet data string for the specified MIPI DSI1 bus trigger search to determine where to place a mark. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:PACKetdata:VALUETwo? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:PACKetdata:VALUETwo? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:PACKetdata:VALUETwo value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:PACKetdata:VALUETwo <string>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:PACKetdata:VALUETwo?

Info

<string> specifies the second byte of a packet data string. The valid characters are 0, 1, and X when the format is set to binary; and 0-9, A-F, and X when the format is set to hexadecimal.

SearchSearchItemTriggerABusMipidsionePayload ¶

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:PAYLoad command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:PAYLoad? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:PAYLoad? query and raise an AssertionError if the returned value does not match value.

Properties

.format: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:PAYLoad:FORMat command.
.size: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:PAYLoad:SIZe command.
.value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:PAYLoad:VALue command.

format `property` ¶

format: SearchSearchItemTriggerABusMipidsionePayloadFormat

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:PAYLoad:FORMat command.

Description

This command sets or queries the generic payload format for the specified MIPI DSI1 bus trigger search to determine where to place a mark. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:PAYLoad:FORMat? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:PAYLoad:FORMat? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:PAYLoad:FORMat value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:PAYLoad:FORMat {BINary|HEXadecimal}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:PAYLoad:FORMat?

Info

BINary specifies the generic payload format as Binary.
HEXadecimal specifies the generic payload format as Hexadecimal.

size `property` ¶

size: SearchSearchItemTriggerABusMipidsionePayloadSize

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:PAYLoad:SIZe command.

Description

This command sets or queries the generic payload size of the specified MIPI DSI1 bus trigger search to determine where to place a mark. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:PAYLoad:SIZe? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:PAYLoad:SIZe? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:PAYLoad:SIZe value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:PAYLoad:SIZe <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:PAYLoad:SIZe?

Info

<NR3> specifies a number from 1 to 16, that sets the size of the generic payload in bytes.

value `property` ¶

value: SearchSearchItemTriggerABusMipidsionePayloadValue

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:PAYLoad:VALue command.

Description

This command sets or queries the generic payload value string of the specified MIPI DSI1 bus trigger search to determine where to place a mark. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:PAYLoad:VALue? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:PAYLoad:VALue? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:PAYLoad:VALue value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:PAYLoad:VALue <string>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:PAYLoad:VALue?

Info

<string> specifies the payload value. The valid characters are 0, 1, and X for values in binary format; and A-F, 0-9, and X for values in hexadecimal format.

SearchSearchItemTriggerABusMipidsionePayloadFormat ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:PAYLoad:FORMat command.

Description

This command sets or queries the generic payload format for the specified MIPI DSI1 bus trigger search to determine where to place a mark. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:PAYLoad:FORMat? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:PAYLoad:FORMat? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:PAYLoad:FORMat value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:PAYLoad:FORMat {BINary|HEXadecimal}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:PAYLoad:FORMat?

Info

BINary specifies the generic payload format as Binary.
HEXadecimal specifies the generic payload format as Hexadecimal.

SearchSearchItemTriggerABusMipidsionePayloadSize ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:PAYLoad:SIZe command.

Description

This command sets or queries the generic payload size of the specified MIPI DSI1 bus trigger search to determine where to place a mark. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:PAYLoad:SIZe? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:PAYLoad:SIZe? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:PAYLoad:SIZe value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:PAYLoad:SIZe <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:PAYLoad:SIZe?

Info

<NR3> specifies a number from 1 to 16, that sets the size of the generic payload in bytes.

SearchSearchItemTriggerABusMipidsionePayloadValue ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:PAYLoad:VALue command.

Description

This command sets or queries the generic payload value string of the specified MIPI DSI1 bus trigger search to determine where to place a mark. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:PAYLoad:VALue? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:PAYLoad:VALue? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:PAYLoad:VALue value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:PAYLoad:VALue <string>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:PAYLoad:VALue?

Info

<string> specifies the payload value. The valid characters are 0, 1, and X for values in binary format; and A-F, 0-9, and X for values in hexadecimal format.

SearchSearchItemTriggerABusMipidsionePixel ¶

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:PIXel command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:PIXel? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:PIXel? query and raise an AssertionError if the returned value does not match value.

Properties

.value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:PIXel:VALue command.

value `property` ¶

value: SearchSearchItemTriggerABusMipidsionePixelValue

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:PIXel:VALue command.

Description

This command sets or queries the pixel value for the specified MIPI DSI1 bus trigger search to determine where to place a mark. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:PIXel:VALue? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:PIXel:VALue? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:PIXel:VALue value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:PIXel:VALue {<NR3>|DONTCare}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:PIXel:VALue?

Info

<NR3> specifies a number that represents the pixel value.
DONTCare specifies the pixel value as Don’t Care.

SearchSearchItemTriggerABusMipidsionePixelValue ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:PIXel:VALue command.

Description

This command sets or queries the pixel value for the specified MIPI DSI1 bus trigger search to determine where to place a mark. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:PIXel:VALue? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:PIXel:VALue? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:PIXel:VALue value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:PIXel:VALue {<NR3>|DONTCare}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:PIXel:VALue?

Info

<NR3> specifies a number that represents the pixel value.
DONTCare specifies the pixel value as Don’t Care.

SearchSearchItemTriggerABusMipidsioneRgb ¶

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:RGB command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:RGB? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:RGB? query and raise an AssertionError if the returned value does not match value.

Properties

.blue: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:RGB:BLUe command tree.
.green: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:RGB:GREen command tree.
.red: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:RGB:RED command tree.

blue `property` ¶

blue: SearchSearchItemTriggerABusMipidsioneRgbBlue

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:RGB:BLUe command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:RGB:BLUe? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:RGB:BLUe? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.qualifier: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:RGB:BLUe:QUAlifier command.
.value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:RGB:BLUe:VALue command.

green `property` ¶

green: SearchSearchItemTriggerABusMipidsioneRgbGreen

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:RGB:GREen command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:RGB:GREen? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:RGB:GREen? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.qualifier: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:RGB:GREen:QUAlifier command.
.value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:RGB:GREen:VALue command.

red `property` ¶

red: SearchSearchItemTriggerABusMipidsioneRgbRed

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:RGB:RED command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:RGB:RED? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:RGB:RED? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.qualifier: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:RGB:RED:QUAlifier command.
.value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:RGB:RED:VALue command.

SearchSearchItemTriggerABusMipidsioneRgbBlue ¶

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:RGB:BLUe command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:RGB:BLUe? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:RGB:BLUe? query and raise an AssertionError if the returned value does not match value.

Properties

.qualifier: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:RGB:BLUe:QUAlifier command.
.value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:RGB:BLUe:VALue command.

qualifier `property` ¶

qualifier: SearchSearchItemTriggerABusMipidsioneRgbBlueQualifier

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:RGB:BLUe:QUAlifier command.

Description

This command sets or queries the RGB Blue qualifier for the specified MIPI DSI1 bus trigger search to determine where to place a mark. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:RGB:BLUe:QUAlifier? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:RGB:BLUe:QUAlifier? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:RGB:BLUe:QUAlifier value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:RGB:BLUe:QUAlifier {EQUal|LESSThan|MOREThan}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:RGB:BLUe:QUAlifier?

Info

EQUal specifies the qualifier as Equal.
LESSThan specifies the qualifier as Less Than.
MOREThan specifies the qualifier as More Than.

value `property` ¶

value: SearchSearchItemTriggerABusMipidsioneRgbBlueValue

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:RGB:BLUe:VALue command.

Description

This command sets or queries the RGB Blue value for the for the specified MIPI DSI1 bus trigger search to determine where to place a mark. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:RGB:BLUe:VALue? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:RGB:BLUe:VALue? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:RGB:BLUe:VALue value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:RGB:BLUe:VALue {<NR3>|DONTCare}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:RGB:BLUe:VALue?

Info

<NR3> specifies a number for the RGB Blue value; the range is dependent on the data type.
DONTCare specifies the RGB Blue value as Don’t Care.

SearchSearchItemTriggerABusMipidsioneRgbBlueQualifier ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:RGB:BLUe:QUAlifier command.

Description

This command sets or queries the RGB Blue qualifier for the specified MIPI DSI1 bus trigger search to determine where to place a mark. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:RGB:BLUe:QUAlifier? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:RGB:BLUe:QUAlifier? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:RGB:BLUe:QUAlifier value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:RGB:BLUe:QUAlifier {EQUal|LESSThan|MOREThan}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:RGB:BLUe:QUAlifier?

Info

EQUal specifies the qualifier as Equal.
LESSThan specifies the qualifier as Less Than.
MOREThan specifies the qualifier as More Than.

SearchSearchItemTriggerABusMipidsioneRgbBlueValue ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:RGB:BLUe:VALue command.

Description

This command sets or queries the RGB Blue value for the for the specified MIPI DSI1 bus trigger search to determine where to place a mark. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:RGB:BLUe:VALue? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:RGB:BLUe:VALue? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:RGB:BLUe:VALue value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:RGB:BLUe:VALue {<NR3>|DONTCare}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:RGB:BLUe:VALue?

Info

<NR3> specifies a number for the RGB Blue value; the range is dependent on the data type.
DONTCare specifies the RGB Blue value as Don’t Care.

SearchSearchItemTriggerABusMipidsioneRgbGreen ¶

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:RGB:GREen command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:RGB:GREen? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:RGB:GREen? query and raise an AssertionError if the returned value does not match value.

Properties

.qualifier: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:RGB:GREen:QUAlifier command.
.value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:RGB:GREen:VALue command.

qualifier `property` ¶

qualifier: SearchSearchItemTriggerABusMipidsioneRgbGreenQualifier

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:RGB:GREen:QUAlifier command.

Description

This command sets or queries the RGB Green qualifier for the specified MIPI DSI1 bus trigger search to determine where to place a mark. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:RGB:GREen:QUAlifier? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:RGB:GREen:QUAlifier? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:RGB:GREen:QUAlifier value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:RGB:GREen:QUAlifier {EQUal|LESSThan|MOREThan}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:RGB:GREen:QUAlifier?

Info

EQUal specifies the qualifier as Equal.
LESSThan specifies the qualifier as Less Than.
MOREThan specifies the qualifier as More Than.

value `property` ¶

value: SearchSearchItemTriggerABusMipidsioneRgbGreenValue

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:RGB:GREen:VALue command.

Description

This command sets or queries the RGB Green value for the specified MIPI DSI1 bus trigger search to determine where to place a mark. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:RGB:GREen:VALue? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:RGB:GREen:VALue? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:RGB:GREen:VALue value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:RGB:GREen:VALue {<NR3>|DONTCare}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:RGB:GREen:VALue?

Info

<NR3> specifies a number for the RGB Green value; the range is dependent on the data type.
DONTCare specifies the RGB Green value as Don’t Care.

SearchSearchItemTriggerABusMipidsioneRgbGreenQualifier ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:RGB:GREen:QUAlifier command.

Description

This command sets or queries the RGB Green qualifier for the specified MIPI DSI1 bus trigger search to determine where to place a mark. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:RGB:GREen:QUAlifier? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:RGB:GREen:QUAlifier? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:RGB:GREen:QUAlifier value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:RGB:GREen:QUAlifier {EQUal|LESSThan|MOREThan}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:RGB:GREen:QUAlifier?

Info

EQUal specifies the qualifier as Equal.
LESSThan specifies the qualifier as Less Than.
MOREThan specifies the qualifier as More Than.

SearchSearchItemTriggerABusMipidsioneRgbGreenValue ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:RGB:GREen:VALue command.

Description

This command sets or queries the RGB Green value for the specified MIPI DSI1 bus trigger search to determine where to place a mark. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:RGB:GREen:VALue? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:RGB:GREen:VALue? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:RGB:GREen:VALue value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:RGB:GREen:VALue {<NR3>|DONTCare}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:RGB:GREen:VALue?

Info

<NR3> specifies a number for the RGB Green value; the range is dependent on the data type.
DONTCare specifies the RGB Green value as Don’t Care.

SearchSearchItemTriggerABusMipidsioneRgbRed ¶

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:RGB:RED command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:RGB:RED? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:RGB:RED? query and raise an AssertionError if the returned value does not match value.

Properties

.qualifier: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:RGB:RED:QUAlifier command.
.value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:RGB:RED:VALue command.

qualifier `property` ¶

qualifier: SearchSearchItemTriggerABusMipidsioneRgbRedQualifier

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:RGB:RED:QUAlifier command.

Description

This command sets or queries the RGB Red qualifier for the specified MIPI DSI1 bus trigger search to determine where to place a mark. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:RGB:RED:QUAlifier? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:RGB:RED:QUAlifier? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:RGB:RED:QUAlifier value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:RGB:RED:QUAlifier {EQUal|LESSThan|MOREThan}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:RGB:RED:QUAlifier?

Info

EQUal specifies the qualifier as Equal.
LESSThan specifies the qualifier as Less Than.
MOREThan specifies the qualifier as More Than.

value `property` ¶

value: SearchSearchItemTriggerABusMipidsioneRgbRedValue

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:RGB:RED:VALue command.

Description

This command sets or queries the RGB Red value for the specified MIPI DSI1 bus trigger search to determine where to place a mark. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:RGB:RED:VALue? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:RGB:RED:VALue? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:RGB:RED:VALue value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:RGB:RED:VALue {<NR3>|DONTCare}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:RGB:RED:VALue?

Info

<NR3> specifies a number for the RGB Red value; the range is dependent on the data type.
DONTCare specifies the RGB Red value as Don’t Care.

SearchSearchItemTriggerABusMipidsioneRgbRedQualifier ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:RGB:RED:QUAlifier command.

Description

This command sets or queries the RGB Red qualifier for the specified MIPI DSI1 bus trigger search to determine where to place a mark. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:RGB:RED:QUAlifier? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:RGB:RED:QUAlifier? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:RGB:RED:QUAlifier value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:RGB:RED:QUAlifier {EQUal|LESSThan|MOREThan}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:RGB:RED:QUAlifier?

Info

EQUal specifies the qualifier as Equal.
LESSThan specifies the qualifier as Less Than.
MOREThan specifies the qualifier as More Than.

SearchSearchItemTriggerABusMipidsioneRgbRedValue ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:RGB:RED:VALue command.

Description

This command sets or queries the RGB Red value for the specified MIPI DSI1 bus trigger search to determine where to place a mark. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:RGB:RED:VALue? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:RGB:RED:VALue? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:RGB:RED:VALue value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:RGB:RED:VALue {<NR3>|DONTCare}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:RGB:RED:VALue?

Info

<NR3> specifies a number for the RGB Red value; the range is dependent on the data type.
DONTCare specifies the RGB Red value as Don’t Care.

SearchSearchItemTriggerABusMipidsioneVc ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:VC command.

Description

This command sets or queries the Virtual Channel for the specified MIPI DSI1 bus trigger search to determine where to place a mark. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:VC? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:VC? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:VC value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:VC {<NR3>|DONTCare}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:VC?

Info

<NR3> specifies a Virtual Channel from 0 to 3.
DONTCare specifies the Virtual Channel as Don’t Care.

SearchSearchItemTriggerABusMipidsioneWarning ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:WARNing command.

Description

This command sets or queries the warning type for a specified MIPI DSI1 bus trigger search to determine where to place a mark. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:WARNing? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:WARNing? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:WARNing value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:WARNing {ANY|ECCWarn}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:WARNing?

Info

ANY specifies the warning type as Any.
ECCWarn specifies the warning type as ECCWarn.

SearchSearchItemTriggerABusMipidsioneWc ¶

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:WC command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:WC? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:WC? query and raise an AssertionError if the returned value does not match value.

Properties

.value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:WC:VALue command.

value `property` ¶

value: SearchSearchItemTriggerABusMipidsioneWcValue

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:WC:VALue command.

Description

This command sets or queries the word count value for the specified MIPI DSI1 bus trigger search to determine where to place a mark. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:WC:VALue? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:WC:VALue? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:WC:VALue value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:WC:VALue {<NR3>|DONTCare}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:WC:VALue?

Info

<NR3> specifies a number for the word count value.
DONTCare specifies the word count value as Don’t Care.

SearchSearchItemTriggerABusMipidsioneWcValue ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:WC:VALue command.

Description

This command sets or queries the word count value for the specified MIPI DSI1 bus trigger search to determine where to place a mark. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:WC:VALue? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:WC:VALue? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:WC:VALue value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:WC:VALue {<NR3>|DONTCare}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:WC:VALue?

Info

<NR3> specifies a number for the word count value.
DONTCare specifies the word count value as Don’t Care.

SearchSearchItemTriggerABusMipidsioneYcbcr ¶

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:YCBCR command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:YCBCR? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:YCBCR? query and raise an AssertionError if the returned value does not match value.

Properties

.cb: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:YCBCR:CB command tree.
.cr: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:YCBCR:CR command tree.
.y: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:YCBCR:Y command tree.

cb `property` ¶

cb: SearchSearchItemTriggerABusMipidsioneYcbcrCb

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:YCBCR:CB command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:YCBCR:CB? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:YCBCR:CB? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.qualifier: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:YCBCR:CB:QUAlifier command.
.value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:YCBCR:CB:VALue command.

cr `property` ¶

cr: SearchSearchItemTriggerABusMipidsioneYcbcrCr

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:YCBCR:CR command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:YCBCR:CR? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:YCBCR:CR? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.qualifier: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:YCBCR:CR:QUAlifier command.
.value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:YCBCR:CR:VALue command.

y `property` ¶

y: SearchSearchItemTriggerABusMipidsioneYcbcrY

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:YCBCR:Y command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:YCBCR:Y? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:YCBCR:Y? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.qualifier: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:YCBCR:Y:QUAlifier command.
.value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:YCBCR:Y:VALue command.

SearchSearchItemTriggerABusMipidsioneYcbcrCb ¶

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:YCBCR:CB command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:YCBCR:CB? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:YCBCR:CB? query and raise an AssertionError if the returned value does not match value.

Properties

.qualifier: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:YCBCR:CB:QUAlifier command.
.value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:YCBCR:CB:VALue command.

qualifier `property` ¶

qualifier: SearchSearchItemTriggerABusMipidsioneYcbcrCbQualifier

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:YCBCR:CB:QUAlifier command.

Description

This command sets or queries MIPI DSI-1 CB qualifier for the specified search. The search is specified by x. The value of x can range from 1 to 8.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:YCBCR:CB:QUAlifier? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:YCBCR:CB:QUAlifier? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:YCBCR:CB:QUAlifier value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:YCBCR:CB:QUAlifier {EQUal|LESSThan|MOREThan}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:YCBCR:CB:QUAlifier?

value `property` ¶

value: SearchSearchItemTriggerABusMipidsioneYcbcrCbValue

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:YCBCR:CB:VALue command.

Description

This command sets or queries MIPI DSI-1 CB value for the specified search. The search is specified by x. The value of x can range from 1 to 8.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:YCBCR:CB:VALue? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:YCBCR:CB:VALue? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:YCBCR:CB:VALue value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:YCBCR:CB:VALue {<nr3>|DONTCare}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:YCBCR:CB:VALue?

Info

<nr3> specifies the CB value.
DONTCare specifies the CB values is don’t care.

SearchSearchItemTriggerABusMipidsioneYcbcrCbQualifier ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:YCBCR:CB:QUAlifier command.

Description

This command sets or queries MIPI DSI-1 CB qualifier for the specified search. The search is specified by x. The value of x can range from 1 to 8.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:YCBCR:CB:QUAlifier? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:YCBCR:CB:QUAlifier? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:YCBCR:CB:QUAlifier value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:YCBCR:CB:QUAlifier {EQUal|LESSThan|MOREThan}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:YCBCR:CB:QUAlifier?

SearchSearchItemTriggerABusMipidsioneYcbcrCbValue ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:YCBCR:CB:VALue command.

Description

This command sets or queries MIPI DSI-1 CB value for the specified search. The search is specified by x. The value of x can range from 1 to 8.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:YCBCR:CB:VALue? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:YCBCR:CB:VALue? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:YCBCR:CB:VALue value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:YCBCR:CB:VALue {<nr3>|DONTCare}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:YCBCR:CB:VALue?

Info

<nr3> specifies the CB value.
DONTCare specifies the CB values is don’t care.

SearchSearchItemTriggerABusMipidsioneYcbcrCr ¶

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:YCBCR:CR command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:YCBCR:CR? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:YCBCR:CR? query and raise an AssertionError if the returned value does not match value.

Properties

.qualifier: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:YCBCR:CR:QUAlifier command.
.value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:YCBCR:CR:VALue command.

qualifier `property` ¶

qualifier: SearchSearchItemTriggerABusMipidsioneYcbcrCrQualifier

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:YCBCR:CR:QUAlifier command.

Description

This command sets or queries MIPI DSI-1 CR qualifier for the specified search. The search is specified by x. The value of x can range from 1 to 8.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:YCBCR:CR:QUAlifier? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:YCBCR:CR:QUAlifier? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:YCBCR:CR:QUAlifier value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:YCBCR:CR:QUAlifier {EQUal|LESSThan|MOREThan}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:YCBCR:CR:QUAlifier?

value `property` ¶

value: SearchSearchItemTriggerABusMipidsioneYcbcrCrValue

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:YCBCR:CR:VALue command.

Description

This command sets or queries MIPI DSI-1 CR value for the specified search. The search is specified by x. The value of x can range from 1 to 8.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:YCBCR:CR:VALue? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:YCBCR:CR:VALue? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:YCBCR:CR:VALue value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:YCBCR:CR:VALue {<nr3>|DONTCare}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:YCBCR:CR:VALue?

Info

<nr3> specifies the CR value.
DONTCare specifies the CR values is don’t care.

SearchSearchItemTriggerABusMipidsioneYcbcrCrQualifier ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:YCBCR:CR:QUAlifier command.

Description

This command sets or queries MIPI DSI-1 CR qualifier for the specified search. The search is specified by x. The value of x can range from 1 to 8.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:YCBCR:CR:QUAlifier? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:YCBCR:CR:QUAlifier? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:YCBCR:CR:QUAlifier value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:YCBCR:CR:QUAlifier {EQUal|LESSThan|MOREThan}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:YCBCR:CR:QUAlifier?

SearchSearchItemTriggerABusMipidsioneYcbcrCrValue ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:YCBCR:CR:VALue command.

Description

This command sets or queries MIPI DSI-1 CR value for the specified search. The search is specified by x. The value of x can range from 1 to 8.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:YCBCR:CR:VALue? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:YCBCR:CR:VALue? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:YCBCR:CR:VALue value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:YCBCR:CR:VALue {<nr3>|DONTCare}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:YCBCR:CR:VALue?

Info

<nr3> specifies the CR value.
DONTCare specifies the CR values is don’t care.

SearchSearchItemTriggerABusMipidsioneYcbcrY ¶

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:YCBCR:Y command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:YCBCR:Y? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:YCBCR:Y? query and raise an AssertionError if the returned value does not match value.

Properties

.qualifier: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:YCBCR:Y:QUAlifier command.
.value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:YCBCR:Y:VALue command.

qualifier `property` ¶

qualifier: SearchSearchItemTriggerABusMipidsioneYcbcrYQualifier

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:YCBCR:Y:QUAlifier command.

Description

This command sets or queries MIPI DSI-1 Y qualifier for the specified search. The search is specified by x. The value of x can range from 1 to 8.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:YCBCR:Y:QUAlifier? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:YCBCR:Y:QUAlifier? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:YCBCR:Y:QUAlifier value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:YCBCR:Y:QUAlifier {EQUal|LESSThan|MOREThan}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:YCBCR:Y:QUAlifier?

value `property` ¶

value: SearchSearchItemTriggerABusMipidsioneYcbcrYValue

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:YCBCR:Y:VALue command.

Description

This command sets or queries MIPI DSI-1 Y value for the specified search. The search is specified by x. The value of x can range from 1 to 8.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:YCBCR:Y:VALue? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:YCBCR:Y:VALue? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:YCBCR:Y:VALue value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:YCBCR:Y:VALue {<nr3>|DONTCare}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:YCBCR:Y:VALue?

Info

<nr3> specifies the Y value.
DONTCare specifies the Y values is don’t care.

SearchSearchItemTriggerABusMipidsioneYcbcrYQualifier ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:YCBCR:Y:QUAlifier command.

Description

This command sets or queries MIPI DSI-1 Y qualifier for the specified search. The search is specified by x. The value of x can range from 1 to 8.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:YCBCR:Y:QUAlifier? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:YCBCR:Y:QUAlifier? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:YCBCR:Y:QUAlifier value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:YCBCR:Y:QUAlifier {EQUal|LESSThan|MOREThan}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:YCBCR:Y:QUAlifier?

SearchSearchItemTriggerABusMipidsioneYcbcrYValue ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:YCBCR:Y:VALue command.

Description

This command sets or queries MIPI DSI-1 Y value for the specified search. The search is specified by x. The value of x can range from 1 to 8.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:YCBCR:Y:VALue? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:YCBCR:Y:VALue? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:YCBCR:Y:VALue value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:YCBCR:Y:VALue {<nr3>|DONTCare}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:MIPIDSIOne:YCBCR:Y:VALue?

Info

<nr3> specifies the Y value.
DONTCare specifies the Y values is don’t care.

SearchSearchItemTriggerABusParallel ¶

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:PARallel command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PARallel? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PARallel? query and raise an AssertionError if the returned value does not match value.

Properties

.data: The SEARCH:SEARCH<x>:TRIGger:A:BUS:PARallel:DATa command tree.

data `property` ¶

data: SearchSearchItemTriggerABusParallelData

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:PARallel:DATa command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PARallel:DATa? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PARallel:DATa? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.format: The SEARCH:SEARCH<x>:TRIGger:A:BUS:PARallel:DATa:FORMat command.
.value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:PARallel:DATa:VALue command.

SearchSearchItemTriggerABusParallelData ¶

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:PARallel:DATa command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PARallel:DATa? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PARallel:DATa? query and raise an AssertionError if the returned value does not match value.

Properties

.format: The SEARCH:SEARCH<x>:TRIGger:A:BUS:PARallel:DATa:FORMat command.
.value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:PARallel:DATa:VALue command.

format `property` ¶

format: SearchSearchItemTriggerABusParallelDataFormat

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:PARallel:DATa:FORMat command.

Description

This command sets or queries the data format for a parallel bus trigger search to determine where to place a mark. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PARallel:DATa:FORMat? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PARallel:DATa:FORMat? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PARallel:DATa:FORMat value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:PARallel:DATa:FORMat {BINary|HEXadecimal|SYMBolic}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PARallel:DATa:FORMat?

Info

BINary specifies the data format as Binary.
HEXadecimal specifies the data format as Hexadecimal.
SYMBolic specifies the data format as Symbolic.

value `property` ¶

value: SearchSearchItemTriggerABusParallelDataValue

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:PARallel:DATa:VALue command.

Description

This command sets or queries the data value string for a parallel bus trigger search to determine where to place a mark. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PARallel:DATa:VALue? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PARallel:DATa:VALue? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PARallel:DATa:VALue value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:PARallel:DATa:VALue <string>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PARallel:DATa:VALue?

Info

<string> specifies the data value in a valid format. Valid characters are 0-9.

SearchSearchItemTriggerABusParallelDataFormat ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:PARallel:DATa:FORMat command.

Description

This command sets or queries the data format for a parallel bus trigger search to determine where to place a mark. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PARallel:DATa:FORMat? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PARallel:DATa:FORMat? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PARallel:DATa:FORMat value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:PARallel:DATa:FORMat {BINary|HEXadecimal|SYMBolic}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PARallel:DATa:FORMat?

Info

BINary specifies the data format as Binary.
HEXadecimal specifies the data format as Hexadecimal.
SYMBolic specifies the data format as Symbolic.

SearchSearchItemTriggerABusParallelDataValue ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:PARallel:DATa:VALue command.

Description

This command sets or queries the data value string for a parallel bus trigger search to determine where to place a mark. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PARallel:DATa:VALue? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PARallel:DATa:VALue? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PARallel:DATa:VALue value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:PARallel:DATa:VALue <string>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PARallel:DATa:VALue?

Info

<string> specifies the data value in a valid format. Valid characters are 0-9.

SearchSearchItemTriggerABusPcie ¶

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE? query and raise an AssertionError if the returned value does not match value.

Properties

.character: The SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:CHARacter command tree.
.condition: The SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:CONDition command.
.disparity: The SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:DISParity command.
.error: The SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:ERROR command tree.
.format: The SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:FORMat command.
.longorderedset: The SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:LONGORDERedset command.
.pattern: The SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:PATtern command tree.

character `property` ¶

character: SearchSearchItemTriggerABusPcieCharacter

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:CHARacter command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:CHARacter? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:CHARacter? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.char: The SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:CHARacter:CHAR command.
.symbol: The SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:CHARacter:SYMbol command tree.

condition `property` ¶

condition: SearchSearchItemTriggerABusPcieCondition

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:CONDition command.

Description

This command sets or queries the PCIE bus search trigger condition. The search number is specified by x.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:CONDition? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:CONDition? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:CONDition value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:CONDition {ANYControl|CHARacter|ERROR|PATtern|LONGORDERedset|SYNCHeader}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:CONDition?

disparity `property` ¶

disparity: SearchSearchItemTriggerABusPcieDisparity

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:DISParity command.

Description

This command sets or queries the PCIE bus search trigger disparity. The search number is specified by x.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:DISParity? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:DISParity? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:DISParity value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:DISParity {EITher|NEGAtive|POSITIVe}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:DISParity?

Info

NEGative specifies negative disparity.
POSITIVe specifies positive disparity.
EITher specifies either disparity.

error `property` ¶

error: SearchSearchItemTriggerABusPcieError

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:ERROR command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:ERROR? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:ERROR? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.char: The SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:ERROR:CHAR command.
.disparity: The SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:ERROR:DISParity command.
.orderedset: The SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:ERROR:ORDERedset command.
.sync: The SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:ERROR:SYNC command.

format `property` ¶

format: SearchSearchItemTriggerABusPcieFormat

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:FORMat command.

Description

This command sets or queries the PCIE search trigger format. The search number is specified by x.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:FORMat? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:FORMat? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:FORMat value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:FORMat {ORDERedset|SYMbol|CHAR}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:FORMat?

longorderedset `property` ¶

longorderedset: SearchSearchItemTriggerABusPcieLongorderedset

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:LONGORDERedset command.

Description

This command sets or queries the PCIE bus search trigger long ordered set. The search number is specified by x.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:LONGORDERedset? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:LONGORDERedset? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:LONGORDERedset value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:LONGORDERedset {CTRLSKP|EI|EIE|FTS|SDS|SKP|TS<x>}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:LONGORDERedset?

Info

CTRLSKP is the Control SKIP ordered set (Gen4).
EI is the Electrical Idle ordered set (Gen3).
EIE is the Electrical Idle Exit ordered set.
FTS is the Fast Training Sequence ordered set (Gen3).
SDS is the Start of Data Stream ordered set (Gen3).
SKP is the SKIP ordered set (Gen3).
TS1 is the Training Sequence 1 ordered set.
TS2 is the Training Sequence 2 ordered set.

pattern `property` ¶

pattern: SearchSearchItemTriggerABusPciePattern

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:PATtern command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:PATtern? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:PATtern? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.char: The SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:PATtern:CHAR<x> command.
.orderedset: The SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:PATtern:ORDERedset command.
.symbol: The SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:PATtern:SYMbol command tree.

SearchSearchItemTriggerABusPcieCharacter ¶

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:CHARacter command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:CHARacter? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:CHARacter? query and raise an AssertionError if the returned value does not match value.

Properties

.char: The SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:CHARacter:CHAR command.
.symbol: The SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:CHARacter:SYMbol command tree.

char `property` ¶

char: SearchSearchItemTriggerABusPcieCharacterChar

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:CHARacter:CHAR command.

Description

This command sets or queries the PCIE bus search trigger character. The search number is specified by x.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:CHARacter:CHAR? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:CHARacter:CHAR? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:CHARacter:CHAR value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:CHARacter:CHAR <STRING>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:CHARacter:CHAR?

Info

<STRING> specifies the trigger character. The string can be a mnemonic, K, or D code character.

symbol `property` ¶

symbol: SearchSearchItemTriggerABusPcieCharacterSymbol

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:CHARacter:SYMbol command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:CHARacter:SYMbol? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:CHARacter:SYMbol? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.minus: The SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:CHARacter:SYMbol:MINus command.
.plus: The SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:CHARacter:SYMbol:PLUS command.

SearchSearchItemTriggerABusPcieCharacterChar ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:CHARacter:CHAR command.

Description

This command sets or queries the PCIE bus search trigger character. The search number is specified by x.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:CHARacter:CHAR? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:CHARacter:CHAR? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:CHARacter:CHAR value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:CHARacter:CHAR <STRING>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:CHARacter:CHAR?

Info

<STRING> specifies the trigger character. The string can be a mnemonic, K, or D code character.

SearchSearchItemTriggerABusPcieCharacterSymbol ¶

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:CHARacter:SYMbol command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:CHARacter:SYMbol? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:CHARacter:SYMbol? query and raise an AssertionError if the returned value does not match value.

Properties

.minus: The SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:CHARacter:SYMbol:MINus command.
.plus: The SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:CHARacter:SYMbol:PLUS command.

minus `property` ¶

minus: SearchSearchItemTriggerABusPcieCharacterSymbolMinus

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:CHARacter:SYMbol:MINus command.

Description

This command sets or queries the PCIE bus search character symbol minus. The search number is specified by x.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:CHARacter:SYMbol:MINus? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:CHARacter:SYMbol:MINus? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:CHARacter:SYMbol:MINus value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:CHARacter:SYMbol:MINus <string>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:CHARacter:SYMbol:MINus?

Info

<string> specifies the character symbol minus.

plus `property` ¶

plus: SearchSearchItemTriggerABusPcieCharacterSymbolPlus

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:CHARacter:SYMbol:PLUS command.

Description

This command sets or queries the PCIE bus search trigger character symbol plus. The search number is specified by x.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:CHARacter:SYMbol:PLUS? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:CHARacter:SYMbol:PLUS? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:CHARacter:SYMbol:PLUS value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:CHARacter:SYMbol:PLUS <string>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:CHARacter:SYMbol:PLUS?

Info

<string> specifies the character symbol plus.

SearchSearchItemTriggerABusPcieCharacterSymbolMinus ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:CHARacter:SYMbol:MINus command.

Description

This command sets or queries the PCIE bus search character symbol minus. The search number is specified by x.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:CHARacter:SYMbol:MINus? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:CHARacter:SYMbol:MINus? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:CHARacter:SYMbol:MINus value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:CHARacter:SYMbol:MINus <string>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:CHARacter:SYMbol:MINus?

Info

<string> specifies the character symbol minus.

SearchSearchItemTriggerABusPcieCharacterSymbolPlus ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:CHARacter:SYMbol:PLUS command.

Description

This command sets or queries the PCIE bus search trigger character symbol plus. The search number is specified by x.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:CHARacter:SYMbol:PLUS? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:CHARacter:SYMbol:PLUS? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:CHARacter:SYMbol:PLUS value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:CHARacter:SYMbol:PLUS <string>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:CHARacter:SYMbol:PLUS?

Info

<string> specifies the character symbol plus.

SearchSearchItemTriggerABusPcieCondition ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:CONDition command.

Description

This command sets or queries the PCIE bus search trigger condition. The search number is specified by x.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:CONDition? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:CONDition? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:CONDition value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:CONDition {ANYControl|CHARacter|ERROR|PATtern|LONGORDERedset|SYNCHeader}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:CONDition?

SearchSearchItemTriggerABusPcieDisparity ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:DISParity command.

Description

This command sets or queries the PCIE bus search trigger disparity. The search number is specified by x.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:DISParity? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:DISParity? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:DISParity value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:DISParity {EITher|NEGAtive|POSITIVe}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:DISParity?

Info

NEGative specifies negative disparity.
POSITIVe specifies positive disparity.
EITher specifies either disparity.

SearchSearchItemTriggerABusPcieError ¶

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:ERROR command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:ERROR? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:ERROR? query and raise an AssertionError if the returned value does not match value.

Properties

.char: The SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:ERROR:CHAR command.
.disparity: The SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:ERROR:DISParity command.
.orderedset: The SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:ERROR:ORDERedset command.
.sync: The SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:ERROR:SYNC command.

char `property` ¶

char: SearchSearchItemTriggerABusPcieErrorChar

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:ERROR:CHAR command.

Description

This command sets or queries the PCIE bus search trigger error character. The search number is specified by x.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:ERROR:CHAR? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:ERROR:CHAR? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:ERROR:CHAR value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:ERROR:CHAR {ON|OFF|<NR1>}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:ERROR:CHAR?

Info

<NR1> = 0 disables the function; any other value enables it.
OFF disables the function.
ON enables the function.

disparity `property` ¶

disparity: SearchSearchItemTriggerABusPcieErrorDisparity

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:ERROR:DISParity command.

Description

This command sets or queries the PCIE search trigger error disparity. The search number is specified by x.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:ERROR:DISParity? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:ERROR:DISParity? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:ERROR:DISParity value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:ERROR:DISParity {ON|OFF|<NR1>}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:ERROR:DISParity?

Info

<NR1> = 0 disables the function; any other value enables it.
OFF disables the function.
ON enables the function.

orderedset `property` ¶

orderedset: SearchSearchItemTriggerABusPcieErrorOrderedset

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:ERROR:ORDERedset command.

Description

This command sets or queries the PCIE bus search trigger error ordered set. The search number is specified by x.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:ERROR:ORDERedset? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:ERROR:ORDERedset? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:ERROR:ORDERedset value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:ERROR:ORDERedset {ON|OFF|<NR1>}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:ERROR:ORDERedset?

Info

<NR1> = 0 disables the function; any other value enables it.
OFF disables the function.
ON enables the function.

sync `property` ¶

sync: SearchSearchItemTriggerABusPcieErrorSync

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:ERROR:SYNC command.

Description

This command sets or queries the triggering on SYNC error state.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:ERROR:SYNC? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:ERROR:SYNC? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:ERROR:SYNC value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:ERROR:SYNC {ON|OFF|<NR1>}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:ERROR:SYNC?

Info

<NR1> = 1 enables the triggering on a SYNC error. Any other character disables the triggering.
OFF disables triggering on a SYNC error.
ON enables triggering on a SYNC error.

SearchSearchItemTriggerABusPcieErrorChar ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:ERROR:CHAR command.

Description

This command sets or queries the PCIE bus search trigger error character. The search number is specified by x.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:ERROR:CHAR? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:ERROR:CHAR? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:ERROR:CHAR value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:ERROR:CHAR {ON|OFF|<NR1>}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:ERROR:CHAR?

Info

<NR1> = 0 disables the function; any other value enables it.
OFF disables the function.
ON enables the function.

SearchSearchItemTriggerABusPcieErrorDisparity ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:ERROR:DISParity command.

Description

This command sets or queries the PCIE search trigger error disparity. The search number is specified by x.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:ERROR:DISParity? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:ERROR:DISParity? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:ERROR:DISParity value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:ERROR:DISParity {ON|OFF|<NR1>}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:ERROR:DISParity?

Info

<NR1> = 0 disables the function; any other value enables it.
OFF disables the function.
ON enables the function.

SearchSearchItemTriggerABusPcieErrorOrderedset ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:ERROR:ORDERedset command.

Description

This command sets or queries the PCIE bus search trigger error ordered set. The search number is specified by x.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:ERROR:ORDERedset? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:ERROR:ORDERedset? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:ERROR:ORDERedset value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:ERROR:ORDERedset {ON|OFF|<NR1>}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:ERROR:ORDERedset?

Info

<NR1> = 0 disables the function; any other value enables it.
OFF disables the function.
ON enables the function.

SearchSearchItemTriggerABusPcieErrorSync ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:ERROR:SYNC command.

Description

This command sets or queries the triggering on SYNC error state.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:ERROR:SYNC? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:ERROR:SYNC? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:ERROR:SYNC value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:ERROR:SYNC {ON|OFF|<NR1>}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:ERROR:SYNC?

Info

<NR1> = 1 enables the triggering on a SYNC error. Any other character disables the triggering.
OFF disables triggering on a SYNC error.
ON enables triggering on a SYNC error.

SearchSearchItemTriggerABusPcieFormat ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:FORMat command.

Description

This command sets or queries the PCIE search trigger format. The search number is specified by x.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:FORMat? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:FORMat? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:FORMat value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:FORMat {ORDERedset|SYMbol|CHAR}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:FORMat?

SearchSearchItemTriggerABusPcieLongorderedset ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:LONGORDERedset command.

Description

This command sets or queries the PCIE bus search trigger long ordered set. The search number is specified by x.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:LONGORDERedset? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:LONGORDERedset? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:LONGORDERedset value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:LONGORDERedset {CTRLSKP|EI|EIE|FTS|SDS|SKP|TS<x>}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:LONGORDERedset?

Info

CTRLSKP is the Control SKIP ordered set (Gen4).
EI is the Electrical Idle ordered set (Gen3).
EIE is the Electrical Idle Exit ordered set.
FTS is the Fast Training Sequence ordered set (Gen3).
SDS is the Start of Data Stream ordered set (Gen3).
SKP is the SKIP ordered set (Gen3).
TS1 is the Training Sequence 1 ordered set.
TS2 is the Training Sequence 2 ordered set.

SearchSearchItemTriggerABusPciePattern ¶

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:PATtern command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:PATtern? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:PATtern? query and raise an AssertionError if the returned value does not match value.

Properties

.char: The SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:PATtern:CHAR<x> command.
.orderedset: The SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:PATtern:ORDERedset command.
.symbol: The SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:PATtern:SYMbol command tree.

char `property` ¶

char: dict[int, SearchSearchItemTriggerABusPciePatternCharItem]

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:PATtern:CHAR<x> command.

Description

This command sets or queries the PCIE bus search pattern character. The search number is specified by x and can be 1 through 16. The character number is specified by x and can be 1 through 4.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:PATtern:CHAR<x>? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:PATtern:CHAR<x>? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:PATtern:CHAR<x> value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:PATtern:CHAR<x> <string>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:PATtern:CHAR<x>?

Info

<string> is the pattern character.

orderedset `property` ¶

orderedset: SearchSearchItemTriggerABusPciePatternOrderedset

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:PATtern:ORDERedset command.

Description

This command sets or queries the PCIE bus search trigger pattern ordered set. The search number is specified by x.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:PATtern:ORDERedset? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:PATtern:ORDERedset? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:PATtern:ORDERedset value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:PATtern:ORDERedset {COMPAT|EI|FTS|SKP|INVALID}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:PATtern:ORDERedset?

Info

COMPAT is the compliance pattern ordered set COM D21.5 COM D10.2.
EI is the electrical idle ordered set COM IDL IDL IDL.
FTS is the fast training sequence ordered set COM FTS FTS FTS.
SKP is the skip ordered set COM SKP SKP SKP.
INVALID is an invalid set. Invalid can be returned, but it should never be sent.

symbol `property` ¶

symbol: SearchSearchItemTriggerABusPciePatternSymbol

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:PATtern:SYMbol command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:PATtern:SYMbol? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:PATtern:SYMbol? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.minus: The SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:PATtern:SYMbol:MINus<x> command.
.plus: The SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:PATtern:SYMbol:PLUS<x> command.

SearchSearchItemTriggerABusPciePatternCharItem ¶

Bases: ValidatedDynamicNumberCmd, SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:PATtern:CHAR<x> command.

Description

This command sets or queries the PCIE bus search pattern character. The search number is specified by x and can be 1 through 16. The character number is specified by x and can be 1 through 4.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:PATtern:CHAR<x>? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:PATtern:CHAR<x>? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:PATtern:CHAR<x> value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:PATtern:CHAR<x> <string>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:PATtern:CHAR<x>?

Info

<string> is the pattern character.

SearchSearchItemTriggerABusPciePatternOrderedset ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:PATtern:ORDERedset command.

Description

This command sets or queries the PCIE bus search trigger pattern ordered set. The search number is specified by x.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:PATtern:ORDERedset? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:PATtern:ORDERedset? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:PATtern:ORDERedset value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:PATtern:ORDERedset {COMPAT|EI|FTS|SKP|INVALID}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:PATtern:ORDERedset?

Info

COMPAT is the compliance pattern ordered set COM D21.5 COM D10.2.
EI is the electrical idle ordered set COM IDL IDL IDL.
FTS is the fast training sequence ordered set COM FTS FTS FTS.
SKP is the skip ordered set COM SKP SKP SKP.
INVALID is an invalid set. Invalid can be returned, but it should never be sent.

SearchSearchItemTriggerABusPciePatternSymbol ¶

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:PATtern:SYMbol command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:PATtern:SYMbol? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:PATtern:SYMbol? query and raise an AssertionError if the returned value does not match value.

Properties

.minus: The SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:PATtern:SYMbol:MINus<x> command.
.plus: The SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:PATtern:SYMbol:PLUS<x> command.

minus `property` ¶

minus: dict[int, SearchSearchItemTriggerABusPciePatternSymbolMinusItem]

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:PATtern:SYMbol:MINus<x> command.

Description

This command sets or queries the PCIE bus search trigger pattern symbol minus. The search number is specified by x and can be 1 through 16. Minus is specified by x and can be 1 through 4.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:PATtern:SYMbol:MINus<x>? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:PATtern:SYMbol:MINus<x>? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:PATtern:SYMbol:MINus<x> value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:PATtern:SYMbol:MINus<x> <string>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:PATtern:SYMbol:MINus<x>?

Info

<string> specifies the minus pattern symbol.

plus `property` ¶

plus: dict[int, SearchSearchItemTriggerABusPciePatternSymbolPlusItem]

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:PATtern:SYMbol:PLUS<x> command.

Description

This command sets or queries the PCIE bus search pattern symbol plus. The search number is specified by x and can be 1 through 16. Plus is specified by x and can be 1 through 4.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:PATtern:SYMbol:PLUS<x>? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:PATtern:SYMbol:PLUS<x>? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:PATtern:SYMbol:PLUS<x> value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:PATtern:SYMbol:PLUS<x> <string>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:PATtern:SYMbol:PLUS<x>?

Info

<string> specifies the plus pattern symbol.

SearchSearchItemTriggerABusPciePatternSymbolMinusItem ¶

Bases: ValidatedDynamicNumberCmd, SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:PATtern:SYMbol:MINus<x> command.

Description

This command sets or queries the PCIE bus search trigger pattern symbol minus. The search number is specified by x and can be 1 through 16. Minus is specified by x and can be 1 through 4.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:PATtern:SYMbol:MINus<x>? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:PATtern:SYMbol:MINus<x>? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:PATtern:SYMbol:MINus<x> value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:PATtern:SYMbol:MINus<x> <string>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:PATtern:SYMbol:MINus<x>?

Info

<string> specifies the minus pattern symbol.

SearchSearchItemTriggerABusPciePatternSymbolPlusItem ¶

Bases: ValidatedDynamicNumberCmd, SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:PATtern:SYMbol:PLUS<x> command.

Description

This command sets or queries the PCIE bus search pattern symbol plus. The search number is specified by x and can be 1 through 16. Plus is specified by x and can be 1 through 4.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:PATtern:SYMbol:PLUS<x>? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:PATtern:SYMbol:PLUS<x>? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:PATtern:SYMbol:PLUS<x> value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:PATtern:SYMbol:PLUS<x> <string>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:PCIE:PATtern:SYMbol:PLUS<x>?

Info

<string> specifies the plus pattern symbol.

SearchSearchItemTriggerABusRs232c ¶

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:RS232C command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:RS232C? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:RS232C? query and raise an AssertionError if the returned value does not match value.

Properties

.condition: The SEARCH:SEARCH<x>:TRIGger:A:BUS:RS232C:CONDition command.
.data: The SEARCH:SEARCH<x>:TRIGger:A:BUS:RS232C:DATa command tree.

condition `property` ¶

condition: SearchSearchItemTriggerABusRs232cCondition

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:RS232C:CONDition command.

Description

This command sets or queries the condition for an RS232C bus search to determine where to place a mark. The search number is specified by x.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:RS232C:CONDition? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:RS232C:CONDition? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:RS232C:CONDition value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:RS232C:CONDition {DATa|EOp|PARItyerror|STARt}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:RS232C:CONDition?

Info

DATa specifies the search condition as Data.
EOp specifies the search condition as End of Packet.
PARItyerror specifies the search condition as Parity Error.
STARt specifies the search condition as Start.

data `property` ¶

data: SearchSearchItemTriggerABusRs232cData

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:RS232C:DATa command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:RS232C:DATa? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:RS232C:DATa? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.format: The SEARCH:SEARCH<x>:TRIGger:A:BUS:RS232C:DATa:FORMat command.
.size: The SEARCH:SEARCH<x>:TRIGger:A:BUS:RS232C:DATa:SIZe command.
.value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:RS232C:DATa:VALue command.

SearchSearchItemTriggerABusRs232cCondition ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:RS232C:CONDition command.

Description

This command sets or queries the condition for an RS232C bus search to determine where to place a mark. The search number is specified by x.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:RS232C:CONDition? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:RS232C:CONDition? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:RS232C:CONDition value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:RS232C:CONDition {DATa|EOp|PARItyerror|STARt}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:RS232C:CONDition?

Info

DATa specifies the search condition as Data.
EOp specifies the search condition as End of Packet.
PARItyerror specifies the search condition as Parity Error.
STARt specifies the search condition as Start.

SearchSearchItemTriggerABusRs232cData ¶

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:RS232C:DATa command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:RS232C:DATa? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:RS232C:DATa? query and raise an AssertionError if the returned value does not match value.

Properties

.format: The SEARCH:SEARCH<x>:TRIGger:A:BUS:RS232C:DATa:FORMat command.
.size: The SEARCH:SEARCH<x>:TRIGger:A:BUS:RS232C:DATa:SIZe command.
.value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:RS232C:DATa:VALue command.

format `property` ¶

format: SearchSearchItemTriggerABusRs232cDataFormat

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:RS232C:DATa:FORMat command.

Description

This command sets or queries the data format for the specified RS232C bus trigger search to determine where to place a mark. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:RS232C:DATa:FORMat? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:RS232C:DATa:FORMat? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:RS232C:DATa:FORMat value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:RS232C:DATa:FORMat {BINary|HEXadecimal}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:RS232C:DATa:FORMat?

Info

BINary specifies the data format as Binary.
HEXadecimal specifies the data format as Hexadecimal.

size `property` ¶

size: SearchSearchItemTriggerABusRs232cDataSize

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:RS232C:DATa:SIZe command.

Description

This command sets or queries the length of the data string in bytes to be used for an RS232 bus search to determine where to place a mark when the search condition is Data. The search number is specified by x.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:RS232C:DATa:SIZe? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:RS232C:DATa:SIZe? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:RS232C:DATa:SIZe value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:RS232C:DATa:SIZe <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:RS232C:DATa:SIZe?

Info

<NR3> is the number of bits per word in the data string, from 1 to 8.

value `property` ¶

value: SearchSearchItemTriggerABusRs232cDataValue

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:RS232C:DATa:VALue command.

Description

This command sets or queries the data string value for the specified RS232C bus trigger search to determine where to place a mark. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:RS232C:DATa:VALue? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:RS232C:DATa:VALue? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:RS232C:DATa:VALue value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:RS232C:DATa:VALue <string>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:RS232C:DATa:VALue?

Info

<string> specifies the value of the data string. The valid characters are 0, 1, and X for values in binary format; and A-F, 0-9, and X for values in hexadecimal format.

SearchSearchItemTriggerABusRs232cDataFormat ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:RS232C:DATa:FORMat command.

Description

This command sets or queries the data format for the specified RS232C bus trigger search to determine where to place a mark. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:RS232C:DATa:FORMat? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:RS232C:DATa:FORMat? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:RS232C:DATa:FORMat value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:RS232C:DATa:FORMat {BINary|HEXadecimal}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:RS232C:DATa:FORMat?

Info

BINary specifies the data format as Binary.
HEXadecimal specifies the data format as Hexadecimal.

SearchSearchItemTriggerABusRs232cDataSize ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:RS232C:DATa:SIZe command.

Description

This command sets or queries the length of the data string in bytes to be used for an RS232 bus search to determine where to place a mark when the search condition is Data. The search number is specified by x.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:RS232C:DATa:SIZe? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:RS232C:DATa:SIZe? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:RS232C:DATa:SIZe value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:RS232C:DATa:SIZe <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:RS232C:DATa:SIZe?

Info

<NR3> is the number of bits per word in the data string, from 1 to 8.

SearchSearchItemTriggerABusRs232cDataValue ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:RS232C:DATa:VALue command.

Description

This command sets or queries the data string value for the specified RS232C bus trigger search to determine where to place a mark. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:RS232C:DATa:VALue? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:RS232C:DATa:VALue? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:RS232C:DATa:VALue value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:RS232C:DATa:VALue <string>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:RS232C:DATa:VALue?

Info

<string> specifies the value of the data string. The valid characters are 0, 1, and X for values in binary format; and A-F, 0-9, and X for values in hexadecimal format.

SearchSearchItemTriggerABusS64b66b ¶

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:S64B66B command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:S64B66B? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:S64B66B? query and raise an AssertionError if the returned value does not match value.

Properties

.blockone: The SEARCH:SEARCH<x>:TRIGger:A:BUS:S64B66B:BLOCKONE command.
.blockonethentwo: The SEARCH:SEARCH<x>:TRIGger:A:BUS:S64B66B:BLOCKONETHENTWO command tree.
.condition: The SEARCH:SEARCH<x>:TRIGger:A:BUS:S64B66B:CONDition command.

blockone `property` ¶

blockone: SearchSearchItemTriggerABusS64b66bBlockone

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:S64B66B:BLOCKONE command.

Description

Set or query the block trigger settings for the specified search.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:S64B66B:BLOCKONE? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:S64B66B:BLOCKONE? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:S64B66B:BLOCKONE value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:S64B66B:BLOCKONE { SYNC|INVSYNC|BLOCKtype|PATtern }
- SEARCH:SEARCH<x>:TRIGger:A:BUS:S64B66B:BLOCKONE?

Info

SYNC
INVSYNC
BLOCKtype
PATtern

Sub-properties

.blocktype: The SEARCH:SEARCH<x>:TRIGger:A:BUS:S64B66B:BLOCKONE:BLOCKType command.
.pattern: The SEARCH:SEARCH<x>:TRIGger:A:BUS:S64B66B:BLOCKONE:PATtern command tree.

blockonethentwo `property` ¶

blockonethentwo: SearchSearchItemTriggerABusS64b66bBlockonethentwo

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:S64B66B:BLOCKONETHENTWO command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:S64B66B:BLOCKONETHENTWO? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:S64B66B:BLOCKONETHENTWO? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.format: The SEARCH:SEARCH<x>:TRIGger:A:BUS:S64B66B:BLOCKONETHENTWO:FORMat command.

condition `property` ¶

condition: SearchSearchItemTriggerABusS64b66bCondition

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:S64B66B:CONDition command.

Description

Set or query the search conditions for the specified search.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:S64B66B:CONDition? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:S64B66B:CONDition? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:S64B66B:CONDition value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:S64B66B:CONDition { BLOCK|BLOCK1THEN2 }
- SEARCH:SEARCH<x>:TRIGger:A:BUS:S64B66B:CONDition?

Info

BLOCK sets the search condition to BLOCK.
BLOCK1THEN2 sets the search condition to BLOCK1THEN2.

SearchSearchItemTriggerABusS64b66bBlockone ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:S64B66B:BLOCKONE command.

Description

Set or query the block trigger settings for the specified search.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:S64B66B:BLOCKONE? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:S64B66B:BLOCKONE? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:S64B66B:BLOCKONE value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:S64B66B:BLOCKONE { SYNC|INVSYNC|BLOCKtype|PATtern }
- SEARCH:SEARCH<x>:TRIGger:A:BUS:S64B66B:BLOCKONE?

Info

SYNC
INVSYNC
BLOCKtype
PATtern

Properties

.blocktype: The SEARCH:SEARCH<x>:TRIGger:A:BUS:S64B66B:BLOCKONE:BLOCKType command.
.pattern: The SEARCH:SEARCH<x>:TRIGger:A:BUS:S64B66B:BLOCKONE:PATtern command tree.

blocktype `property` ¶

blocktype: SearchSearchItemTriggerABusS64b66bBlockoneBlocktype

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:S64B66B:BLOCKONE:BLOCKType command.

Description

Set or query the control block type for the specified search.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:S64B66B:BLOCKONE:BLOCKType? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:S64B66B:BLOCKONE:BLOCKType? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:S64B66B:BLOCKONE:BLOCKType value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:S64B66B:BLOCKONE:BLOCKType { NONe|X1E|X2D|X33|X66|X55|X78|X4B|X87|X99|XB4|XCC|XD2|XE1|XFF }
- SEARCH:SEARCH<x>:TRIGger:A:BUS:S64B66B:BLOCKONE:BLOCKType?

Info

NONe
X1E
X2D
X33
X66
X55
X78
X4B
X87
X99
XB4
XCC
XD2
XE1
XFF

pattern `property` ¶

pattern: SearchSearchItemTriggerABusS64b66bBlockonePattern

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:S64B66B:BLOCKONE:PATtern command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:S64B66B:BLOCKONE:PATtern? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:S64B66B:BLOCKONE:PATtern? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.format: The SEARCH:SEARCH<x>:TRIGger:A:BUS:S64B66B:BLOCKONE:PATtern:FORMat command.
.sync: The SEARCH:SEARCH<x>:TRIGger:A:BUS:S64B66B:BLOCKONE:PATtern:SYNC command.
.value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:S64B66B:BLOCKONE:PATtern:VALue command.

SearchSearchItemTriggerABusS64b66bBlockoneBlocktype ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:S64B66B:BLOCKONE:BLOCKType command.

Description

Set or query the control block type for the specified search.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:S64B66B:BLOCKONE:BLOCKType? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:S64B66B:BLOCKONE:BLOCKType? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:S64B66B:BLOCKONE:BLOCKType value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:S64B66B:BLOCKONE:BLOCKType { NONe|X1E|X2D|X33|X66|X55|X78|X4B|X87|X99|XB4|XCC|XD2|XE1|XFF }
- SEARCH:SEARCH<x>:TRIGger:A:BUS:S64B66B:BLOCKONE:BLOCKType?

Info

NONe
X1E
X2D
X33
X66
X55
X78
X4B
X87
X99
XB4
XCC
XD2
XE1
XFF

SearchSearchItemTriggerABusS64b66bBlockonePattern ¶

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:S64B66B:BLOCKONE:PATtern command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:S64B66B:BLOCKONE:PATtern? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:S64B66B:BLOCKONE:PATtern? query and raise an AssertionError if the returned value does not match value.

Properties

.format: The SEARCH:SEARCH<x>:TRIGger:A:BUS:S64B66B:BLOCKONE:PATtern:FORMat command.
.sync: The SEARCH:SEARCH<x>:TRIGger:A:BUS:S64B66B:BLOCKONE:PATtern:SYNC command.
.value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:S64B66B:BLOCKONE:PATtern:VALue command.

format `property` ¶

format: SearchSearchItemTriggerABusS64b66bBlockonePatternFormat

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:S64B66B:BLOCKONE:PATtern:FORMat command.

Description

Set or query the pattern format for block when search on block is set to Pattern for the specified search.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:S64B66B:BLOCKONE:PATtern:FORMat? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:S64B66B:BLOCKONE:PATtern:FORMat? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:S64B66B:BLOCKONE:PATtern:FORMat value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:S64B66B:BLOCKONE:PATtern:FORMat { Binary|HEX }
- SEARCH:SEARCH<x>:TRIGger:A:BUS:S64B66B:BLOCKONE:PATtern:FORMat?

Info

Binary indicates the binary pattern format.
HEX indicates the hex pattern format.

sync `property` ¶

sync: SearchSearchItemTriggerABusS64b66bBlockonePatternSync

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:S64B66B:BLOCKONE:PATtern:SYNC command.

Description

Set or query the sync value of the block for the specified search.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:S64B66B:BLOCKONE:PATtern:SYNC? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:S64B66B:BLOCKONE:PATtern:SYNC? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:S64B66B:BLOCKONE:PATtern:SYNC value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:S64B66B:BLOCKONE:PATtern:SYNC <string>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:S64B66B:BLOCKONE:PATtern:SYNC?

Info

<string> is two bits wide.

value `property` ¶

value: SearchSearchItemTriggerABusS64b66bBlockonePatternValue

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:S64B66B:BLOCKONE:PATtern:VALue command.

Description

Set or query the pattern for block when search on block is set to Pattern for the specified search.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:S64B66B:BLOCKONE:PATtern:VALue? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:S64B66B:BLOCKONE:PATtern:VALue? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:S64B66B:BLOCKONE:PATtern:VALue value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:S64B66B:BLOCKONE:PATtern:VALue <string>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:S64B66B:BLOCKONE:PATtern:VALue?

Info

<string> is 64 bits wide.

SearchSearchItemTriggerABusS64b66bBlockonePatternFormat ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:S64B66B:BLOCKONE:PATtern:FORMat command.

Description

Set or query the pattern format for block when search on block is set to Pattern for the specified search.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:S64B66B:BLOCKONE:PATtern:FORMat? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:S64B66B:BLOCKONE:PATtern:FORMat? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:S64B66B:BLOCKONE:PATtern:FORMat value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:S64B66B:BLOCKONE:PATtern:FORMat { Binary|HEX }
- SEARCH:SEARCH<x>:TRIGger:A:BUS:S64B66B:BLOCKONE:PATtern:FORMat?

Info

Binary indicates the binary pattern format.
HEX indicates the hex pattern format.

SearchSearchItemTriggerABusS64b66bBlockonePatternSync ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:S64B66B:BLOCKONE:PATtern:SYNC command.

Description

Set or query the sync value of the block for the specified search.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:S64B66B:BLOCKONE:PATtern:SYNC? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:S64B66B:BLOCKONE:PATtern:SYNC? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:S64B66B:BLOCKONE:PATtern:SYNC value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:S64B66B:BLOCKONE:PATtern:SYNC <string>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:S64B66B:BLOCKONE:PATtern:SYNC?

Info

<string> is two bits wide.

SearchSearchItemTriggerABusS64b66bBlockonePatternValue ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:S64B66B:BLOCKONE:PATtern:VALue command.

Description

Set or query the pattern for block when search on block is set to Pattern for the specified search.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:S64B66B:BLOCKONE:PATtern:VALue? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:S64B66B:BLOCKONE:PATtern:VALue? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:S64B66B:BLOCKONE:PATtern:VALue value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:S64B66B:BLOCKONE:PATtern:VALue <string>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:S64B66B:BLOCKONE:PATtern:VALue?

Info

<string> is 64 bits wide.

SearchSearchItemTriggerABusS64b66bBlockonethentwo ¶

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:S64B66B:BLOCKONETHENTWO command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:S64B66B:BLOCKONETHENTWO? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:S64B66B:BLOCKONETHENTWO? query and raise an AssertionError if the returned value does not match value.

Properties

.format: The SEARCH:SEARCH<x>:TRIGger:A:BUS:S64B66B:BLOCKONETHENTWO:FORMat command.

format `property` ¶

format: SearchSearchItemTriggerABusS64b66bBlockonethentwoFormat

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:S64B66B:BLOCKONETHENTWO:FORMat command.

Description

Set or query the pattern format for Block1Then2 for the specified search.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:S64B66B:BLOCKONETHENTWO:FORMat? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:S64B66B:BLOCKONETHENTWO:FORMat? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:S64B66B:BLOCKONETHENTWO:FORMat value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:S64B66B:BLOCKONETHENTWO:FORMat { Binary|HEX }
- SEARCH:SEARCH<x>:TRIGger:A:BUS:S64B66B:BLOCKONETHENTWO:FORMat?

Info

Binary indicates the binary pattern format.
HEX indicates the hex pattern format.

SearchSearchItemTriggerABusS64b66bBlockonethentwoFormat ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:S64B66B:BLOCKONETHENTWO:FORMat command.

Description

Set or query the pattern format for Block1Then2 for the specified search.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:S64B66B:BLOCKONETHENTWO:FORMat? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:S64B66B:BLOCKONETHENTWO:FORMat? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:S64B66B:BLOCKONETHENTWO:FORMat value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:S64B66B:BLOCKONETHENTWO:FORMat { Binary|HEX }
- SEARCH:SEARCH<x>:TRIGger:A:BUS:S64B66B:BLOCKONETHENTWO:FORMat?

Info

Binary indicates the binary pattern format.
HEX indicates the hex pattern format.

SearchSearchItemTriggerABusS64b66bCondition ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:S64B66B:CONDition command.

Description

Set or query the search conditions for the specified search.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:S64B66B:CONDition? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:S64B66B:CONDition? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:S64B66B:CONDition value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:S64B66B:CONDition { BLOCK|BLOCK1THEN2 }
- SEARCH:SEARCH<x>:TRIGger:A:BUS:S64B66B:CONDition?

Info

BLOCK sets the search condition to BLOCK.
BLOCK1THEN2 sets the search condition to BLOCK1THEN2.

SearchSearchItemTriggerABusS8b10b ¶

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B? query and raise an AssertionError if the returned value does not match value.

Properties

.character: The SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:CHARacter command tree.
.condition: The SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:CONDition command.
.disparity: The SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:DISParity command.
.error: The SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:ERROR command tree.
.format: The SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:FORMat command.
.pattern: The SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:PATtern command tree.

character `property` ¶

character: SearchSearchItemTriggerABusS8b10bCharacter

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:CHARacter command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:CHARacter? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:CHARacter? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.char: The SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:CHARacter:CHAR command.
.symbol: The SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:CHARacter:SYMbol command tree.

condition `property` ¶

condition: SearchSearchItemTriggerABusS8b10bCondition

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:CONDition command.

Description

This command sets or queries the trigger condition for the specified search to determine where to place a mark. The search number is represented by . The selection (character, error, pattern, or any control) must be correct before you can use the corresponding 8B10B search commands (character, error, and pattern).

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:CONDition? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:CONDition? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:CONDition value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:CONDition {ANYControl|CHARacter|ERROR| PATtern}?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:CONDition?

Info

ANYCONTROL specifies that the oscilloscope will search for any control character.
CHARACTER specifies that the oscilloscope will search for a character, specified by SEARCH:SEARCHX:TRIGGER:A:BUS:S8B10B:CHARACTER:CHAR.
ERROR specifies that the oscilloscope will search for errors, specified by SEARCH:SEARCHX:TRIGGER:A:BUS:S8B10B:ERROR:CHAR and SEARCH:SEARCHX:TRIGGER:A:BUS:S8B10B:ERROR:DISPARITY.
PATTERN specifies that the oscilloscope will search for a pattern, specified by SEARCH:SEARCHX:TRIGGER:A:BUS:S8B10B:PATTERN:CHARX, SEARCH:SEARCHX:TRIGGER:A:BUS:S8B10B:PATTERN:SYMBOL:MINUSX, or SEARCH:SEARCHX:TRIGGER:A:BUS:S8B10B:PATTERN:SYMBOL:PLUSX.

disparity `property` ¶

disparity: SearchSearchItemTriggerABusS8b10bDisparity

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:DISParity command.

Description

Sets or queries the disparity (positive, negative, or either).

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:DISParity? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:DISParity? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:DISParity value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:DISParity {NEGAtive|POSITIVe|EITher}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:DISParity?

Info

POSITIVE only the positive values will be used in the search.
NEGATIVE only the negative values will be used in the search.
EITHER positive and negative values will be used in the search.

error `property` ¶

error: SearchSearchItemTriggerABusS8b10bError

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:ERROR command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:ERROR? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:ERROR? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.char: The SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:ERROR:CHAR command.
.disparity: The SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:ERROR:DISParity command.

format `property` ¶

format: SearchSearchItemTriggerABusS8b10bFormat

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:FORMat command.

Description

Sets the format for the specified search to character or symbol, or queries the state of this feature. Applies to the search character and pattern commands.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:FORMat? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:FORMat? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:FORMat value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:FORMat {CHAR|SYMbol}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:FORMat?

Info

CHARACTER allows you to edit the values using character format.
SYMBOL allows you to edit the values using symbol format (using the binary equivalent to the character value).

pattern `property` ¶

pattern: SearchSearchItemTriggerABusS8b10bPattern

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:PATtern command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:PATtern? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:PATtern? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.char: The SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:PATtern:CHAR<x> command.
.symbol: The SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:PATtern:SYMbol command tree.

SearchSearchItemTriggerABusS8b10bCharacter ¶

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:CHARacter command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:CHARacter? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:CHARacter? query and raise an AssertionError if the returned value does not match value.

Properties

.char: The SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:CHARacter:CHAR command.
.symbol: The SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:CHARacter:SYMbol command tree.

char `property` ¶

char: SearchSearchItemTriggerABusS8b10bCharacterChar

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:CHARacter:CHAR command.

Description

Sets or queries the single 8B10B character in the specified search.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:CHARacter:CHAR? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:CHARacter:CHAR? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:CHARacter:CHAR value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:CHARacter:CHAR <string>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:CHARacter:CHAR?

Info

<string> sets the 8B10B character.

symbol `property` ¶

symbol: SearchSearchItemTriggerABusS8b10bCharacterSymbol

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:CHARacter:SYMbol command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:CHARacter:SYMbol? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:CHARacter:SYMbol? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.minus: The SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:CHARacter:SYMbol:MINus command.
.plus: The SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:CHARacter:SYMbol:PLUS command.

SearchSearchItemTriggerABusS8b10bCharacterChar ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:CHARacter:CHAR command.

Description

Sets or queries the single 8B10B character in the specified search.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:CHARacter:CHAR? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:CHARacter:CHAR? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:CHARacter:CHAR value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:CHARacter:CHAR <string>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:CHARacter:CHAR?

Info

<string> sets the 8B10B character.

SearchSearchItemTriggerABusS8b10bCharacterSymbol ¶

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:CHARacter:SYMbol command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:CHARacter:SYMbol? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:CHARacter:SYMbol? query and raise an AssertionError if the returned value does not match value.

Properties

.minus: The SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:CHARacter:SYMbol:MINus command.
.plus: The SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:CHARacter:SYMbol:PLUS command.

minus `property` ¶

minus: SearchSearchItemTriggerABusS8b10bCharacterSymbolMinus

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:CHARacter:SYMbol:MINus command.

Description

Sets or queries the specified 8B10B character bit pattern (negative disparity) for the specified search.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:CHARacter:SYMbol:MINus? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:CHARacter:SYMbol:MINus? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:CHARacter:SYMbol:MINus value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:CHARacter:SYMbol:MINus <string>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:CHARacter:SYMbol:MINus?

Info

<string> sets the 8B10B character bit pattern.

plus `property` ¶

plus: SearchSearchItemTriggerABusS8b10bCharacterSymbolPlus

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:CHARacter:SYMbol:PLUS command.

Description

Sets or queries the specified 8B10B character bit pattern (positive disparity) for the specified search.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:CHARacter:SYMbol:PLUS? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:CHARacter:SYMbol:PLUS? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:CHARacter:SYMbol:PLUS value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:CHARacter:SYMbol:PLUS <string>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:CHARacter:SYMbol:PLUS?

Info

<string> sets the character bit pattern.

SearchSearchItemTriggerABusS8b10bCharacterSymbolMinus ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:CHARacter:SYMbol:MINus command.

Description

Sets or queries the specified 8B10B character bit pattern (negative disparity) for the specified search.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:CHARacter:SYMbol:MINus? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:CHARacter:SYMbol:MINus? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:CHARacter:SYMbol:MINus value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:CHARacter:SYMbol:MINus <string>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:CHARacter:SYMbol:MINus?

Info

<string> sets the 8B10B character bit pattern.

SearchSearchItemTriggerABusS8b10bCharacterSymbolPlus ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:CHARacter:SYMbol:PLUS command.

Description

Sets or queries the specified 8B10B character bit pattern (positive disparity) for the specified search.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:CHARacter:SYMbol:PLUS? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:CHARacter:SYMbol:PLUS? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:CHARacter:SYMbol:PLUS value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:CHARacter:SYMbol:PLUS <string>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:CHARacter:SYMbol:PLUS?

Info

<string> sets the character bit pattern.

SearchSearchItemTriggerABusS8b10bCondition ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:CONDition command.

Description

This command sets or queries the trigger condition for the specified search to determine where to place a mark. The search number is represented by . The selection (character, error, pattern, or any control) must be correct before you can use the corresponding 8B10B search commands (character, error, and pattern).

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:CONDition? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:CONDition? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:CONDition value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:CONDition {ANYControl|CHARacter|ERROR| PATtern}?
- SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:CONDition?

Info

ANYCONTROL specifies that the oscilloscope will search for any control character.
CHARACTER specifies that the oscilloscope will search for a character, specified by SEARCH:SEARCHX:TRIGGER:A:BUS:S8B10B:CHARACTER:CHAR.
ERROR specifies that the oscilloscope will search for errors, specified by SEARCH:SEARCHX:TRIGGER:A:BUS:S8B10B:ERROR:CHAR and SEARCH:SEARCHX:TRIGGER:A:BUS:S8B10B:ERROR:DISPARITY.
PATTERN specifies that the oscilloscope will search for a pattern, specified by SEARCH:SEARCHX:TRIGGER:A:BUS:S8B10B:PATTERN:CHARX, SEARCH:SEARCHX:TRIGGER:A:BUS:S8B10B:PATTERN:SYMBOL:MINUSX, or SEARCH:SEARCHX:TRIGGER:A:BUS:S8B10B:PATTERN:SYMBOL:PLUSX.

SearchSearchItemTriggerABusS8b10bDisparity ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:DISParity command.

Description

Sets or queries the disparity (positive, negative, or either).

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:DISParity? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:DISParity? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:DISParity value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:DISParity {NEGAtive|POSITIVe|EITher}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:DISParity?

Info

POSITIVE only the positive values will be used in the search.
NEGATIVE only the negative values will be used in the search.
EITHER positive and negative values will be used in the search.

SearchSearchItemTriggerABusS8b10bError ¶

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:ERROR command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:ERROR? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:ERROR? query and raise an AssertionError if the returned value does not match value.

Properties

.char: The SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:ERROR:CHAR command.
.disparity: The SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:ERROR:DISParity command.

char `property` ¶

char: SearchSearchItemTriggerABusS8b10bErrorChar

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:ERROR:CHAR command.

Description

Sets the character error search to on or off, or queries the status of the feature.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:ERROR:CHAR? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:ERROR:CHAR? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:ERROR:CHAR value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:ERROR:CHAR {ON|OFF|<NR1>}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:ERROR:CHAR?

Info

<NR1> = 1 enables the character error search. Any other character disables the search.
ON enables the character error search.
OFF disables the character error search.

disparity `property` ¶

disparity: SearchSearchItemTriggerABusS8b10bErrorDisparity

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:ERROR:DISParity command.

Description

Sets or queries the disparity error search (on or off).

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:ERROR:DISParity? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:ERROR:DISParity? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:ERROR:DISParity value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:ERROR:DISParity {ON|OFF|<NR1>}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:ERROR:DISParity?

Info

<NR1> = 1 enables the disparity error search. Any other character disables the search.
ON enables the disparity error search.
OFF disables the disparity error search.

SearchSearchItemTriggerABusS8b10bErrorChar ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:ERROR:CHAR command.

Description

Sets the character error search to on or off, or queries the status of the feature.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:ERROR:CHAR? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:ERROR:CHAR? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:ERROR:CHAR value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:ERROR:CHAR {ON|OFF|<NR1>}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:ERROR:CHAR?

Info

<NR1> = 1 enables the character error search. Any other character disables the search.
ON enables the character error search.
OFF disables the character error search.

SearchSearchItemTriggerABusS8b10bErrorDisparity ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:ERROR:DISParity command.

Description

Sets or queries the disparity error search (on or off).

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:ERROR:DISParity? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:ERROR:DISParity? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:ERROR:DISParity value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:ERROR:DISParity {ON|OFF|<NR1>}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:ERROR:DISParity?

Info

<NR1> = 1 enables the disparity error search. Any other character disables the search.
ON enables the disparity error search.
OFF disables the disparity error search.

SearchSearchItemTriggerABusS8b10bFormat ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:FORMat command.

Description

Sets the format for the specified search to character or symbol, or queries the state of this feature. Applies to the search character and pattern commands.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:FORMat? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:FORMat? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:FORMat value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:FORMat {CHAR|SYMbol}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:FORMat?

Info

CHARACTER allows you to edit the values using character format.
SYMBOL allows you to edit the values using symbol format (using the binary equivalent to the character value).

SearchSearchItemTriggerABusS8b10bPattern ¶

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:PATtern command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:PATtern? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:PATtern? query and raise an AssertionError if the returned value does not match value.

Properties

.char: The SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:PATtern:CHAR<x> command.
.symbol: The SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:PATtern:SYMbol command tree.

char `property` ¶

char: dict[int, SearchSearchItemTriggerABusS8b10bPatternCharItem]

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:PATtern:CHAR<x> command.

Description

Sets or queries the first, second, third or fourth character in the pattern for the specified search.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:PATtern:CHAR<x>? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:PATtern:CHAR<x>? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:PATtern:CHAR<x> value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:PATtern:CHAR<x> <string>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:PATtern:CHAR<x>?

Info

<string> is the 8B10B character.

symbol `property` ¶

symbol: SearchSearchItemTriggerABusS8b10bPatternSymbol

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:PATtern:SYMbol command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:PATtern:SYMbol? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:PATtern:SYMbol? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.minus: The SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:PATtern:SYMbol:MINus<x> command.
.plus: The SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:PATtern:SYMbol:PLUS<x> command.

SearchSearchItemTriggerABusS8b10bPatternCharItem ¶

Bases: ValidatedDynamicNumberCmd, SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:PATtern:CHAR<x> command.

Description

Sets or queries the first, second, third or fourth character in the pattern for the specified search.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:PATtern:CHAR<x>? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:PATtern:CHAR<x>? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:PATtern:CHAR<x> value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:PATtern:CHAR<x> <string>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:PATtern:CHAR<x>?

Info

<string> is the 8B10B character.

SearchSearchItemTriggerABusS8b10bPatternSymbol ¶

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:PATtern:SYMbol command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:PATtern:SYMbol? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:PATtern:SYMbol? query and raise an AssertionError if the returned value does not match value.

Properties

.minus: The SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:PATtern:SYMbol:MINus<x> command.
.plus: The SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:PATtern:SYMbol:PLUS<x> command.

minus `property` ¶

minus: dict[int, SearchSearchItemTriggerABusS8b10bPatternSymbolMinusItem]

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:PATtern:SYMbol:MINus<x> command.

Description

Sets or queries the specified character bit pattern (negative disparity) for the specified search.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:PATtern:SYMbol:MINus<x>? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:PATtern:SYMbol:MINus<x>? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:PATtern:SYMbol:MINus<x> value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:PATtern:SYMbol:MINus<x> <string>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:PATtern:SYMbol:MINus<x>?

Info

<string> is the character bit pattern.

plus `property` ¶

plus: dict[int, SearchSearchItemTriggerABusS8b10bPatternSymbolPlusItem]

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:PATtern:SYMbol:PLUS<x> command.

Description

Sets or queries the specified 8B10B character bit pattern (positive disparity) for the specified search.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:PATtern:SYMbol:PLUS<x>? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:PATtern:SYMbol:PLUS<x>? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:PATtern:SYMbol:PLUS<x> value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:PATtern:SYMbol:PLUS<x> <string>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:PATtern:SYMbol:PLUS<x>?

Info

<string> is the 8B10B character bit pattern.

SearchSearchItemTriggerABusS8b10bPatternSymbolMinusItem ¶

Bases: ValidatedDynamicNumberCmd, SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:PATtern:SYMbol:MINus<x> command.

Description

Sets or queries the specified character bit pattern (negative disparity) for the specified search.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:PATtern:SYMbol:MINus<x>? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:PATtern:SYMbol:MINus<x>? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:PATtern:SYMbol:MINus<x> value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:PATtern:SYMbol:MINus<x> <string>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:PATtern:SYMbol:MINus<x>?

Info

<string> is the character bit pattern.

SearchSearchItemTriggerABusS8b10bPatternSymbolPlusItem ¶

Bases: ValidatedDynamicNumberCmd, SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:PATtern:SYMbol:PLUS<x> command.

Description

Sets or queries the specified 8B10B character bit pattern (positive disparity) for the specified search.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:PATtern:SYMbol:PLUS<x>? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:PATtern:SYMbol:PLUS<x>? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:PATtern:SYMbol:PLUS<x> value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:PATtern:SYMbol:PLUS<x> <string>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:S8B10B:PATtern:SYMbol:PLUS<x>?

Info

<string> is the 8B10B character bit pattern.

SearchSearchItemTriggerABusSource ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:SOUrce command.

Description

This command sets or queries the bus source for the bus search to determine where to place a mark. The search number is specified by x.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SOUrce? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SOUrce? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SOUrce value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:SOUrce {B0|B1|B2|B3|B4|B5|B6|B7|B8|B9|B10|B11|B12|B13|B14|B15|B16}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SOUrce?

Info

B<x> specifies the bus source as a bus number from B01 to B16. x has a minimum of 0 and a maximum of 16.

SearchSearchItemTriggerABusSpi ¶

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:SPI command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SPI? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SPI? query and raise an AssertionError if the returned value does not match value.

Properties

.condition: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:CONDition command.
.data: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:DATa command tree.

condition `property` ¶

condition: SearchSearchItemTriggerABusSpiCondition

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:CONDition command.

Description

This command sets or queries the trigger condition for the specified SPI bus trigger search to determine where to place a mark. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:CONDition? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:CONDition? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:CONDition value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:CONDition {DATA|SS}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:CONDition?

Info

DATA specifies the trigger condition as Data.
SS specifies the trigger condition as Slave Selection.

data `property` ¶

data: SearchSearchItemTriggerABusSpiData

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:DATa command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:DATa? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:DATa? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.format: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:DATa:FORMat command.
.size: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:DATa:SIZe command.
.value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:DATa:VALue command.

SearchSearchItemTriggerABusSpiCondition ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:CONDition command.

Description

This command sets or queries the trigger condition for the specified SPI bus trigger search to determine where to place a mark. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:CONDition? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:CONDition? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:CONDition value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:CONDition {DATA|SS}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:CONDition?

Info

DATA specifies the trigger condition as Data.
SS specifies the trigger condition as Slave Selection.

SearchSearchItemTriggerABusSpiData ¶

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:DATa command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:DATa? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:DATa? query and raise an AssertionError if the returned value does not match value.

Properties

.format: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:DATa:FORMat command.
.size: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:DATa:SIZe command.
.value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:DATa:VALue command.

format `property` ¶

format: SearchSearchItemTriggerABusSpiDataFormat

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:DATa:FORMat command.

Description

This command sets or queries the data format for the specified SPI bus trigger search to determine where to place a mark. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:DATa:FORMat? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:DATa:FORMat? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:DATa:FORMat value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:DATa:FORMat {BINary|HEXadecimal}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:DATa:FORMat?

Info

BINary specifies the data format as Binary.
HEXadecimal specifies the data format as Hexadecimal.

size `property` ¶

size: SearchSearchItemTriggerABusSpiDataSize

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:DATa:SIZe command.

Description

This command sets or queries the length of the data string in bytes used for the specified SPI bus trigger search to determine where to place a mark. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:DATa:SIZe? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:DATa:SIZe? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:DATa:SIZe value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:DATa:SIZe <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:DATa:SIZe?

Info

<NR3> specifies the number of contiguous data bytes.

value `property` ¶

value: SearchSearchItemTriggerABusSpiDataValue

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:DATa:VALue command.

Description

The command sets or queries the data value of the data token for the specified SPI bus trigger search to determine where to place a mark. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:DATa:VALue? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:DATa:VALue? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:DATa:VALue value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:DATa:VALue <string>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:DATa:VALue?

Info

<string> specifies the data value in the specified valid format. The valid characters are 0, 1, and X for binary format; and A-F, 0-9, and X for hexadecimal format.

SearchSearchItemTriggerABusSpiDataFormat ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:DATa:FORMat command.

Description

This command sets or queries the data format for the specified SPI bus trigger search to determine where to place a mark. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:DATa:FORMat? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:DATa:FORMat? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:DATa:FORMat value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:DATa:FORMat {BINary|HEXadecimal}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:DATa:FORMat?

Info

BINary specifies the data format as Binary.
HEXadecimal specifies the data format as Hexadecimal.

SearchSearchItemTriggerABusSpiDataSize ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:DATa:SIZe command.

Description

This command sets or queries the length of the data string in bytes used for the specified SPI bus trigger search to determine where to place a mark. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:DATa:SIZe? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:DATa:SIZe? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:DATa:SIZe value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:DATa:SIZe <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:DATa:SIZe?

Info

<NR3> specifies the number of contiguous data bytes.

SearchSearchItemTriggerABusSpiDataValue ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:DATa:VALue command.

Description

The command sets or queries the data value of the data token for the specified SPI bus trigger search to determine where to place a mark. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:DATa:VALue? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:DATa:VALue? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:DATa:VALue value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:DATa:VALue <string>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:DATa:VALue?

Info

<string> specifies the data value in the specified valid format. The valid characters are 0, 1, and X for binary format; and A-F, 0-9, and X for hexadecimal format.

SearchSearchItemTriggerABusUsb ¶

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB? query and raise an AssertionError if the returned value does not match value.

Properties

.address: The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ADDress command tree.
.character: The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:CHARacter command tree.
.condition: The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:CONDition command.
.data: The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa command tree.
.disparity: The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DISParity command.
.endpoint: The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ENDPoint command tree.
.error: The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ERROR command tree.
.errtype: The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ERRTYPE command.
.format: The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:FORMat command.
.handshaketype: The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:HANDSHAKEType command.
.longorderedset: The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:LONGORDERedset command.
.packets: The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:PACKets command.
.pattern: The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:PATtern command tree.
.qualifier: The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:QUAlifier command.
.sof: The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SOF command tree.
.specialtype: The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPECIALType command.
.split: The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT command tree.
.tokentype: The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:TOKENType command.

address `property` ¶

address: SearchSearchItemTriggerABusUsbAddress

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ADDress command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ADDress? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ADDress? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.format: The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ADDress:FORMat command.
.hivalue: The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ADDress:HIVALue command.
.value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ADDress:VALue command.

character `property` ¶

character: SearchSearchItemTriggerABusUsbCharacter

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:CHARacter command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:CHARacter? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:CHARacter? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.char: The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:CHARacter:CHAR command.
.symbol: The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:CHARacter:SYMbol command tree.

condition `property` ¶

condition: SearchSearchItemTriggerABusUsbCondition

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:CONDition command.

Description

This command sets or queries the search condition for the specified USB bus trigger search to determine where to place a mark. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:CONDition? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:CONDition? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:CONDition value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:CONDition {DATAPacket|EOP|ERROR|HANDSHAKEPacket|RESET|RESUME|SPECIALPacket|SUSPEND|SYNC|TOKENPacket}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:CONDition?

Info

DATAPacket specifies the search condition as Data Packet.
EOP specifies the search condition as End of Packet.
ERROR specifies the search condition as Error.
HANDSHAKEPacket specifies the search condition as Handshake Packet.
RESET specifies the search condition as Reset.
RESUME specifies the search condition as Resume.
SPECIALPacket specifies the search condition as Special Packet.
SUSPEND specifies the search condition as Suspend.
SYNC specifies the search condition as Sync.
TOKENPacket specifies the search condition as Token (Address) Packet.

data `property` ¶

data: SearchSearchItemTriggerABusUsbData

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.format: The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:FORMat command.
.hivalue: The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:HIVALue command.
.offset: The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:OFFSet command.
.size: The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:SIZe command.
.type: The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:TYPe command.
.value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:VALue command.

disparity `property` ¶

disparity: SearchSearchItemTriggerABusUsbDisparity

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DISParity command.

Description

Sets or queries the disparity (positive, negative, or either).

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DISParity? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DISParity? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DISParity value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DISParity {NEGAtive|POSITIVe|EITher}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DISParity?

Info

POSITIVE only the positive values will be used in the search.
NEGATIVE only the negative values will be used in the search.
EITHER positive and negative values will be used in the search.

endpoint `property` ¶

endpoint: SearchSearchItemTriggerABusUsbEndpoint

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ENDPoint command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ENDPoint? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ENDPoint? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.format: The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ENDPoint:FORMat command.
.hivalue: The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ENDPoint:HIVALue command.
.value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ENDPoint:VALue command.

error `property` ¶

error: SearchSearchItemTriggerABusUsbError

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ERROR command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ERROR? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ERROR? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.char: The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ERROR:CHAR command.
.disparity: The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ERROR:DISParity command.
.orderedset: The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ERROR:ORDERedset command.

errtype `property` ¶

errtype: SearchSearchItemTriggerABusUsbErrtype

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ERRTYPE command.

Description

This command sets or queries the error type for the specified USB bus trigger search to determine where to place a mark. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ERRTYPE? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ERRTYPE? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ERRTYPE value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ERRTYPE {BITSTUFFing|CRC5|CRC16|PID}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ERRTYPE?

Info

BITSTUFFing specifies the error type as Bit Stuffing.
CRC5 specifies the error type as Token CRC5 (Cyclic Redundancy Check 5).
CRC16 specifies the error type as Data CRC16 (Cyclic Redundancy Check 16).
PID specifies the error type as PID Check Bits.

format `property` ¶

format: SearchSearchItemTriggerABusUsbFormat

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:FORMat command.

Description

Sets the format for the specified search to character or symbol, or queries the state of this feature. Applies to the search character and pattern commands.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:FORMat? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:FORMat? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:FORMat value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:FORMat {CHAR|SYMbol}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:FORMat?

Info

CHARACTER allows you to edit the values using character format.
SYMBOL allows you to edit the values using symbol format (using the binary equivalent to the character value).

handshaketype `property` ¶

handshaketype: SearchSearchItemTriggerABusUsbHandshaketype

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:HANDSHAKEType command.

Description

This command sets or queries the handshake type for the specified USB bus trigger search to determine where to place a mark. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:HANDSHAKEType? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:HANDSHAKEType? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:HANDSHAKEType value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:HANDSHAKEType {ACK|ANY|NAK|NYET|STALL}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:HANDSHAKEType?

Info

ACK specifies the handshake type as Acknowledgement (positive) (XX10).
ANY specifies the handshake type as Any (0010).
NAK specifies the handshake type as Negative Acknowledgment (1010).
NYET specifies the handshake type as No response Yet (0110).
STALL specifies the handshake type as Stall (endpoint is halted or control pipe request not supported) (1110).

longorderedset `property` ¶

longorderedset: SearchSearchItemTriggerABusUsbLongorderedset

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:LONGORDERedset command.

Description

This command sets or queries the USB bus search trigger long ordered set. The search number is specified by x.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:LONGORDERedset? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:LONGORDERedset? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:LONGORDERedset value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:LONGORDERedset {EIE|TS<x>}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:LONGORDERedset?

Info

EIE is the Electrical Idle Exit ordered set.
TS1 is the Training Sequence 1 ordered set.
TS2 is the Training Sequence 2 ordered set.

packets `property` ¶

packets: SearchSearchItemTriggerABusUsbPackets

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:PACKets command.

Description

Sets or queries the USB bus search packets to mark. This setting only applies when search type is set to Packets. This setting is only available when the USB bitrate is set to SS.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:PACKets? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:PACKets? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:PACKets value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:PACKets {LMP|TP|DP|ITP}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:PACKets?

Info

LMP mark LMP packets.
TP mark TP packets.
DP mark DP packets.
ITP Mmark ITP packets.

Sub-properties

.lmppackets: The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:PACKets:LMPPACKets command.
.tppackets: The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:PACKets:TPPACKets command.

pattern `property` ¶

pattern: SearchSearchItemTriggerABusUsbPattern

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:PATtern command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:PATtern? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:PATtern? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.char: The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:PATtern:CHAR<x> command.
.numsymbols: The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:PATtern:NUMSymbols command.
.orderedset: The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:PATtern:ORDERedset command.
.symbol: The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:PATtern:SYMbol command tree.

qualifier `property` ¶

qualifier: SearchSearchItemTriggerABusUsbQualifier

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:QUAlifier command.

Description

This command sets or queries the qualifier for address and data for the specified bus trigger search to determine where to place a mark. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:QUAlifier? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:QUAlifier? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:QUAlifier value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:QUAlifier {EQUal|INrange|LESSEQual|MOREEQual|OUTrange|UNEQual|LESSThan|MOREThan}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:QUAlifier?

Info

EQUal specifies the qualifier as Equal.
INrange specifies the qualifier as Inside Range.
LESSEQual specifies the qualifier as Less Than or Equal to.
MOREEQual specifies the qualifier as More Than or Equal to.
OUTrange specifies the qualifier as Out of Range.
UNEQual specifies the qualifier as Unequal.
LESSThan specifies the qualifier as Less Than.
MOREThan specifies the qualifier as More Than.

sof `property` ¶

sof: SearchSearchItemTriggerABusUsbSof

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SOF command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SOF? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SOF? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.format: The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SOF:FORMat command.
.framenumber: The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SOF:FRAMENUMber command.

specialtype `property` ¶

specialtype: SearchSearchItemTriggerABusUsbSpecialtype

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPECIALType command.

Description

This command sets or queries the PID value for the specified USB bus trigger search to determine where to place a mark. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPECIALType? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPECIALType? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPECIALType value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPECIALType {ANY|ERR|PING|PRE|RESERVED|SPLIT}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPECIALType?

Info

ANY specifies the PID value as Any (XX00).
ERR specifies the PID value as ERR (1100).
PING specifies the PID value as PING (0100).
PRE specifies the PID value as PRE (1100).
RESERVED specifies the PID value as Reserved (0000).
SPLIT specifies the PID value as Split (1000).

split `property` ¶

split: SearchSearchItemTriggerABusUsbSplit

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.et: The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:ET command tree.
.hub: The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:HUB command tree.
.port: The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:PORT command tree.
.sc: The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:SC command tree.
.se: The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:SE command tree.

tokentype `property` ¶

tokentype: SearchSearchItemTriggerABusUsbTokentype

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:TOKENType command.

Description

This command sets or queries the token type when the specified USB bus trigger search to determine where to place a mark. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:TOKENType? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:TOKENType? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:TOKENType value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:TOKENType {ANY|IN|OUT|SETUP|SOF}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:TOKENType?

Info

ANY specifies the token type as Any (XX01).
IN specifies the token type as IN (1001).
OUT specifies the token type as OUT (0001).
SETUP specifies the token type as SETUP (1101).
SOF specifies the token type as Start Of Frame (0101).

SearchSearchItemTriggerABusUsbAddress ¶

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ADDress command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ADDress? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ADDress? query and raise an AssertionError if the returned value does not match value.

Properties

.format: The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ADDress:FORMat command.
.hivalue: The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ADDress:HIVALue command.
.value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ADDress:VALue command.

format `property` ¶

format: SearchSearchItemTriggerABusUsbAddressFormat

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ADDress:FORMat command.

Description

This command sets or queries the address format for normal token for the specified USB bus trigger search to determine where to place a mark. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ADDress:FORMat? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ADDress:FORMat? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ADDress:FORMat value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ADDress:FORMat {BINary|HEX|SYMBolic}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ADDress:FORMat?

Info

BINary specifies the address format as Binary.
HEX specifies the address format as Hexadecimal.
SYMBolic specifies the address format as Symbolic.

hivalue `property` ¶

hivalue: SearchSearchItemTriggerABusUsbAddressHivalue

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ADDress:HIVALue command.

Description

This command sets or queries the address value for normal token to be used with In Range and Out of Range qualifiers for the specified USB bus trigger search to determine where to place a mark. is the search number. The VALue and HIVALue set a range that the INrange and OUTrange qualifiers use to decide when to trigger. For example, if the QUALIFER is set to INrange, and the address is within the range set by VALue and HIVALue, then a trigger can be generated.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ADDress:HIVALue? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ADDress:HIVALue? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ADDress:HIVALue value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ADDress:HIVALue <string>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ADDress:HIVALue?

Info

<string> specifies the data value in the specified valid format. The valid characters are 0, 1, and X for binary; for hexadecimal; and symbolic).

value `property` ¶

value: SearchSearchItemTriggerABusUsbAddressValue

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ADDress:VALue command.

Description

This command sets or queries the address value for normal token for the specified USB bus trigger search to determine where to place a mark. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ADDress:VALue? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ADDress:VALue? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ADDress:VALue value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ADDress:VALue <string>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ADDress:VALue?

Info

<string> specifies the data value in the specified valid format. Valid characters are 0, 1, and X for binary; A-F, 0-9 and X for hexadecimal; and for symbolic.

SearchSearchItemTriggerABusUsbAddressFormat ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ADDress:FORMat command.

Description

This command sets or queries the address format for normal token for the specified USB bus trigger search to determine where to place a mark. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ADDress:FORMat? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ADDress:FORMat? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ADDress:FORMat value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ADDress:FORMat {BINary|HEX|SYMBolic}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ADDress:FORMat?

Info

BINary specifies the address format as Binary.
HEX specifies the address format as Hexadecimal.
SYMBolic specifies the address format as Symbolic.

SearchSearchItemTriggerABusUsbAddressHivalue ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ADDress:HIVALue command.

Description

This command sets or queries the address value for normal token to be used with In Range and Out of Range qualifiers for the specified USB bus trigger search to determine where to place a mark. is the search number. The VALue and HIVALue set a range that the INrange and OUTrange qualifiers use to decide when to trigger. For example, if the QUALIFER is set to INrange, and the address is within the range set by VALue and HIVALue, then a trigger can be generated.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ADDress:HIVALue? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ADDress:HIVALue? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ADDress:HIVALue value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ADDress:HIVALue <string>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ADDress:HIVALue?

Info

<string> specifies the data value in the specified valid format. The valid characters are 0, 1, and X for binary; for hexadecimal; and symbolic).

SearchSearchItemTriggerABusUsbAddressValue ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ADDress:VALue command.

Description

This command sets or queries the address value for normal token for the specified USB bus trigger search to determine where to place a mark. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ADDress:VALue? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ADDress:VALue? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ADDress:VALue value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ADDress:VALue <string>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ADDress:VALue?

Info

<string> specifies the data value in the specified valid format. Valid characters are 0, 1, and X for binary; A-F, 0-9 and X for hexadecimal; and for symbolic.

SearchSearchItemTriggerABusUsbCharacter ¶

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:CHARacter command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:CHARacter? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:CHARacter? query and raise an AssertionError if the returned value does not match value.

Properties

.char: The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:CHARacter:CHAR command.
.symbol: The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:CHARacter:SYMbol command tree.

char `property` ¶

char: SearchSearchItemTriggerABusUsbCharacterChar

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:CHARacter:CHAR command.

Description

Sets or queries the single USB character in the specified search.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:CHARacter:CHAR? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:CHARacter:CHAR? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:CHARacter:CHAR value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:CHARacter:CHAR <string>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:CHARacter:CHAR?

Info

<string> sets the character bit pattern.

symbol `property` ¶

symbol: SearchSearchItemTriggerABusUsbCharacterSymbol

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:CHARacter:SYMbol command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:CHARacter:SYMbol? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:CHARacter:SYMbol? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.minus: The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:CHARacter:SYMbol:MINus command.
.plus: The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:CHARacter:SYMbol:PLUS command.

SearchSearchItemTriggerABusUsbCharacterChar ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:CHARacter:CHAR command.

Description

Sets or queries the single USB character in the specified search.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:CHARacter:CHAR? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:CHARacter:CHAR? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:CHARacter:CHAR value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:CHARacter:CHAR <string>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:CHARacter:CHAR?

Info

<string> sets the character bit pattern.

SearchSearchItemTriggerABusUsbCharacterSymbol ¶

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:CHARacter:SYMbol command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:CHARacter:SYMbol? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:CHARacter:SYMbol? query and raise an AssertionError if the returned value does not match value.

Properties

.minus: The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:CHARacter:SYMbol:MINus command.
.plus: The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:CHARacter:SYMbol:PLUS command.

minus `property` ¶

minus: SearchSearchItemTriggerABusUsbCharacterSymbolMinus

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:CHARacter:SYMbol:MINus command.

Description

Sets or queries the specified USB character bit pattern (negative disparity) for the specified search.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:CHARacter:SYMbol:MINus? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:CHARacter:SYMbol:MINus? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:CHARacter:SYMbol:MINus value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:CHARacter:SYMbol:MINus <string>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:CHARacter:SYMbol:MINus?

Info

<string> sets the character bit pattern.

plus `property` ¶

plus: SearchSearchItemTriggerABusUsbCharacterSymbolPlus

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:CHARacter:SYMbol:PLUS command.

Description

Sets or queries the specified character bit pattern (positive disparity) for the specified search.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:CHARacter:SYMbol:PLUS? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:CHARacter:SYMbol:PLUS? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:CHARacter:SYMbol:PLUS value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:CHARacter:SYMbol:PLUS <string>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:CHARacter:SYMbol:PLUS?

Info

<string> sets the character bit pattern.

SearchSearchItemTriggerABusUsbCharacterSymbolMinus ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:CHARacter:SYMbol:MINus command.

Description

Sets or queries the specified USB character bit pattern (negative disparity) for the specified search.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:CHARacter:SYMbol:MINus? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:CHARacter:SYMbol:MINus? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:CHARacter:SYMbol:MINus value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:CHARacter:SYMbol:MINus <string>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:CHARacter:SYMbol:MINus?

Info

<string> sets the character bit pattern.

SearchSearchItemTriggerABusUsbCharacterSymbolPlus ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:CHARacter:SYMbol:PLUS command.

Description

Sets or queries the specified character bit pattern (positive disparity) for the specified search.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:CHARacter:SYMbol:PLUS? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:CHARacter:SYMbol:PLUS? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:CHARacter:SYMbol:PLUS value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:CHARacter:SYMbol:PLUS <string>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:CHARacter:SYMbol:PLUS?

Info

<string> sets the character bit pattern.

SearchSearchItemTriggerABusUsbCondition ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:CONDition command.

Description

This command sets or queries the search condition for the specified USB bus trigger search to determine where to place a mark. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:CONDition? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:CONDition? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:CONDition value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:CONDition {DATAPacket|EOP|ERROR|HANDSHAKEPacket|RESET|RESUME|SPECIALPacket|SUSPEND|SYNC|TOKENPacket}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:CONDition?

Info

DATAPacket specifies the search condition as Data Packet.
EOP specifies the search condition as End of Packet.
ERROR specifies the search condition as Error.
HANDSHAKEPacket specifies the search condition as Handshake Packet.
RESET specifies the search condition as Reset.
RESUME specifies the search condition as Resume.
SPECIALPacket specifies the search condition as Special Packet.
SUSPEND specifies the search condition as Suspend.
SYNC specifies the search condition as Sync.
TOKENPacket specifies the search condition as Token (Address) Packet.

SearchSearchItemTriggerABusUsbData ¶

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa? query and raise an AssertionError if the returned value does not match value.

Properties

.format: The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:FORMat command.
.hivalue: The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:HIVALue command.
.offset: The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:OFFSet command.
.size: The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:SIZe command.
.type: The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:TYPe command.
.value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:VALue command.

format `property` ¶

format: SearchSearchItemTriggerABusUsbDataFormat

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:FORMat command.

Description

This command sets or queries the data format for the specified USB bus trigger search to determine where to place a mark. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:FORMat? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:FORMat? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:FORMat value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:FORMat {BINary|HEX|SYMBolic}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:FORMat?

Info

BINary specifies the data format as Binary.
HEX specifies the data format as Hexadecimal.
SYMBolic specifies the data format as Symbolic.

hivalue `property` ¶

hivalue: SearchSearchItemTriggerABusUsbDataHivalue

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:HIVALue command.

Description

This command sets or queries the data value for data token used with In Range and Out of Range qualifiers for the specified USB bus trigger search to determine where to place a mark. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:HIVALue? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:HIVALue? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:HIVALue value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:HIVALue <string>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:HIVALue?

Info

<string> specifies the data value in the specified valid format (binary, hexadecimal, or symbolic). The valid characters for binary are 0, 1, and X;.

offset `property` ¶

offset: SearchSearchItemTriggerABusUsbDataOffset

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:OFFSet command.

Description

This command sets or queries the data offset for the specified USB bus trigger search to determine where to place a mark. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:OFFSet? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:OFFSet? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:OFFSet value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:OFFSet {<NR3>|DONTCare}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:OFFSet?

Info

<NR3> specifies the data offset in bytes.
DONTCare specifies the data offset as Don’t Care.

size `property` ¶

size: SearchSearchItemTriggerABusUsbDataSize

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:SIZe command.

Description

This command sets or queries the length of the data string in bytes for the specified USB bus trigger search to determine where to place a mark. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:SIZe? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:SIZe? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:SIZe value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:SIZe <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:SIZe?

Info

<NR3> specifies the data size in bytes.

type `property` ¶

type: SearchSearchItemTriggerABusUsbDataType

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:TYPe command.

Description

This command sets or queries the data packet type for the specified USB bus trigger search to determine where to place a mark. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:TYPe? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:TYPe? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:TYPe value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:TYPe {ANY|DATA<x>|MDATA}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:TYPe?

Info

ANY specifies the data packet type as Any.
DATA0 specifies the data packet type as DATA0.
DATA1 specifies the data packet type as DATA1.
DATA2 specifies the data packet type as DATA2.
MDATA specifies the data packet type as MDATA.

value `property` ¶

value: SearchSearchItemTriggerABusUsbDataValue

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:VALue command.

Description

This command sets or queries the data value for data token for the specified bus trigger search to determine where to place a mark. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:VALue? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:VALue? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:VALue value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:VALue <string>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:VALue?

Info

<string> specifies the data value. The valid characters are 0, 1, and X for binary format; and A-F, 0-9, and X for hexadecimal format.

SearchSearchItemTriggerABusUsbDataFormat ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:FORMat command.

Description

This command sets or queries the data format for the specified USB bus trigger search to determine where to place a mark. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:FORMat? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:FORMat? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:FORMat value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:FORMat {BINary|HEX|SYMBolic}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:FORMat?

Info

BINary specifies the data format as Binary.
HEX specifies the data format as Hexadecimal.
SYMBolic specifies the data format as Symbolic.

SearchSearchItemTriggerABusUsbDataHivalue ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:HIVALue command.

Description

This command sets or queries the data value for data token used with In Range and Out of Range qualifiers for the specified USB bus trigger search to determine where to place a mark. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:HIVALue? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:HIVALue? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:HIVALue value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:HIVALue <string>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:HIVALue?

Info

<string> specifies the data value in the specified valid format (binary, hexadecimal, or symbolic). The valid characters for binary are 0, 1, and X;.

SearchSearchItemTriggerABusUsbDataOffset ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:OFFSet command.

Description

This command sets or queries the data offset for the specified USB bus trigger search to determine where to place a mark. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:OFFSet? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:OFFSet? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:OFFSet value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:OFFSet {<NR3>|DONTCare}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:OFFSet?

Info

<NR3> specifies the data offset in bytes.
DONTCare specifies the data offset as Don’t Care.

SearchSearchItemTriggerABusUsbDataSize ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:SIZe command.

Description

This command sets or queries the length of the data string in bytes for the specified USB bus trigger search to determine where to place a mark. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:SIZe? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:SIZe? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:SIZe value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:SIZe <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:SIZe?

Info

<NR3> specifies the data size in bytes.

SearchSearchItemTriggerABusUsbDataType ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:TYPe command.

Description

This command sets or queries the data packet type for the specified USB bus trigger search to determine where to place a mark. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:TYPe? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:TYPe? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:TYPe value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:TYPe {ANY|DATA<x>|MDATA}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:TYPe?

Info

ANY specifies the data packet type as Any.
DATA0 specifies the data packet type as DATA0.
DATA1 specifies the data packet type as DATA1.
DATA2 specifies the data packet type as DATA2.
MDATA specifies the data packet type as MDATA.

SearchSearchItemTriggerABusUsbDataValue ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:VALue command.

Description

This command sets or queries the data value for data token for the specified bus trigger search to determine where to place a mark. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:VALue? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:VALue? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:VALue value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:VALue <string>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:VALue?

Info

<string> specifies the data value. The valid characters are 0, 1, and X for binary format; and A-F, 0-9, and X for hexadecimal format.

SearchSearchItemTriggerABusUsbDisparity ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DISParity command.

Description

Sets or queries the disparity (positive, negative, or either).

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DISParity? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DISParity? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DISParity value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DISParity {NEGAtive|POSITIVe|EITher}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DISParity?

Info

POSITIVE only the positive values will be used in the search.
NEGATIVE only the negative values will be used in the search.
EITHER positive and negative values will be used in the search.

SearchSearchItemTriggerABusUsbEndpoint ¶

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ENDPoint command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ENDPoint? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ENDPoint? query and raise an AssertionError if the returned value does not match value.

Properties

.format: The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ENDPoint:FORMat command.
.hivalue: The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ENDPoint:HIVALue command.
.value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ENDPoint:VALue command.

format `property` ¶

format: SearchSearchItemTriggerABusUsbEndpointFormat

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ENDPoint:FORMat command.

Description

This command sets or queries the endpoint format for data token (to be used with In Range and Out of Range qualifiers) for the specified USB bus trigger search to determine where to place a mark. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ENDPoint:FORMat? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ENDPoint:FORMat? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ENDPoint:FORMat value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ENDPoint:FORMat {BINary|HEXadecimal|SYMBolic}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ENDPoint:FORMat?

Info

BINary specifies the endpoint format as Binary.
HEXadecimal specifies the endpoint format as Hexadecimal.
SYMBolic specifies the endpoint format as Symbolic.

hivalue `property` ¶

hivalue: SearchSearchItemTriggerABusUsbEndpointHivalue

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ENDPoint:HIVALue command.

Description

This command sets or queries the endpoint value for data token used with In Range and Out of Range qualifiers for the specified USB bus trigger search to determine where to place a mark. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ENDPoint:HIVALue? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ENDPoint:HIVALue? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ENDPoint:HIVALue value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ENDPoint:HIVALue <string>}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ENDPoint:HIVALue?

Info

<string> specifies the data value in the specified valid format.
<No LRN> specifies do not return a list of instrument settings.
<No BQ> specifies do not.

value `property` ¶

value: SearchSearchItemTriggerABusUsbEndpointValue

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ENDPoint:VALue command.

Description

This command sets or queries the endpoint value for normal token for the specified USB bus trigger search to determine where to place a mark. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ENDPoint:VALue? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ENDPoint:VALue? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ENDPoint:VALue value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ENDPoint:VALue <string>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ENDPoint:VALue?

Info

<string> specifies the data value in the specified valid format. The valid characters are 0, 1, and X for binary format; A-F, 0-9 and X for hexadecimal format.

SearchSearchItemTriggerABusUsbEndpointFormat ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ENDPoint:FORMat command.

Description

This command sets or queries the endpoint format for data token (to be used with In Range and Out of Range qualifiers) for the specified USB bus trigger search to determine where to place a mark. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ENDPoint:FORMat? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ENDPoint:FORMat? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ENDPoint:FORMat value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ENDPoint:FORMat {BINary|HEXadecimal|SYMBolic}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ENDPoint:FORMat?

Info

BINary specifies the endpoint format as Binary.
HEXadecimal specifies the endpoint format as Hexadecimal.
SYMBolic specifies the endpoint format as Symbolic.

SearchSearchItemTriggerABusUsbEndpointHivalue ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ENDPoint:HIVALue command.

Description

This command sets or queries the endpoint value for data token used with In Range and Out of Range qualifiers for the specified USB bus trigger search to determine where to place a mark. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ENDPoint:HIVALue? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ENDPoint:HIVALue? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ENDPoint:HIVALue value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ENDPoint:HIVALue <string>}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ENDPoint:HIVALue?

Info

<string> specifies the data value in the specified valid format.
<No LRN> specifies do not return a list of instrument settings.
<No BQ> specifies do not.

SearchSearchItemTriggerABusUsbEndpointValue ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ENDPoint:VALue command.

Description

This command sets or queries the endpoint value for normal token for the specified USB bus trigger search to determine where to place a mark. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ENDPoint:VALue? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ENDPoint:VALue? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ENDPoint:VALue value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ENDPoint:VALue <string>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ENDPoint:VALue?

Info

<string> specifies the data value in the specified valid format. The valid characters are 0, 1, and X for binary format; A-F, 0-9 and X for hexadecimal format.

SearchSearchItemTriggerABusUsbError ¶

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ERROR command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ERROR? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ERROR? query and raise an AssertionError if the returned value does not match value.

Properties

.char: The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ERROR:CHAR command.
.disparity: The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ERROR:DISParity command.
.orderedset: The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ERROR:ORDERedset command.

char `property` ¶

char: SearchSearchItemTriggerABusUsbErrorChar

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ERROR:CHAR command.

Description

Sets the character error search to on or off, or queries the status of the feature.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ERROR:CHAR? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ERROR:CHAR? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ERROR:CHAR value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ERROR:CHAR {ON|OFF|<NR1>}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ERROR:CHAR?

Info

<NR1> = 1 enables the character error search. Any other character disables the search.
ON enables the character error search.
OFF disables the character error search.

disparity `property` ¶

disparity: SearchSearchItemTriggerABusUsbErrorDisparity

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ERROR:DISParity command.

Description

Sets or queries the disparity error search (on or off).

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ERROR:DISParity? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ERROR:DISParity? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ERROR:DISParity value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ERROR:DISParity {ON|OFF|<NR1>}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ERROR:DISParity?

Info

<NR1> = 1 enables the disparity error search. Any other character disables the search.
ON enables the disparity error search.
OFF disables the disparity error search.

orderedset `property` ¶

orderedset: SearchSearchItemTriggerABusUsbErrorOrderedset

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ERROR:ORDERedset command.

Description

This command sets or queries the state of searching for an ordered set in the specified search.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ERROR:ORDERedset? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ERROR:ORDERedset? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ERROR:ORDERedset value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ERROR:ORDERedset {|OFF|ON}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ERROR:ORDERedset?

Info

OFF disables searching for an ordered set.
ON enables searching for an ordered set.

SearchSearchItemTriggerABusUsbErrorChar ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ERROR:CHAR command.

Description

Sets the character error search to on or off, or queries the status of the feature.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ERROR:CHAR? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ERROR:CHAR? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ERROR:CHAR value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ERROR:CHAR {ON|OFF|<NR1>}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ERROR:CHAR?

Info

<NR1> = 1 enables the character error search. Any other character disables the search.
ON enables the character error search.
OFF disables the character error search.

SearchSearchItemTriggerABusUsbErrorDisparity ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ERROR:DISParity command.

Description

Sets or queries the disparity error search (on or off).

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ERROR:DISParity? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ERROR:DISParity? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ERROR:DISParity value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ERROR:DISParity {ON|OFF|<NR1>}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ERROR:DISParity?

Info

<NR1> = 1 enables the disparity error search. Any other character disables the search.
ON enables the disparity error search.
OFF disables the disparity error search.

SearchSearchItemTriggerABusUsbErrorOrderedset ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ERROR:ORDERedset command.

Description

This command sets or queries the state of searching for an ordered set in the specified search.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ERROR:ORDERedset? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ERROR:ORDERedset? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ERROR:ORDERedset value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ERROR:ORDERedset {|OFF|ON}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ERROR:ORDERedset?

Info

OFF disables searching for an ordered set.
ON enables searching for an ordered set.

SearchSearchItemTriggerABusUsbErrtype ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ERRTYPE command.

Description

This command sets or queries the error type for the specified USB bus trigger search to determine where to place a mark. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ERRTYPE? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ERRTYPE? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ERRTYPE value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ERRTYPE {BITSTUFFing|CRC5|CRC16|PID}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ERRTYPE?

Info

BITSTUFFing specifies the error type as Bit Stuffing.
CRC5 specifies the error type as Token CRC5 (Cyclic Redundancy Check 5).
CRC16 specifies the error type as Data CRC16 (Cyclic Redundancy Check 16).
PID specifies the error type as PID Check Bits.

SearchSearchItemTriggerABusUsbFormat ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:FORMat command.

Description

Sets the format for the specified search to character or symbol, or queries the state of this feature. Applies to the search character and pattern commands.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:FORMat? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:FORMat? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:FORMat value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:FORMat {CHAR|SYMbol}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:FORMat?

Info

CHARACTER allows you to edit the values using character format.
SYMBOL allows you to edit the values using symbol format (using the binary equivalent to the character value).

SearchSearchItemTriggerABusUsbHandshaketype ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:HANDSHAKEType command.

Description

This command sets or queries the handshake type for the specified USB bus trigger search to determine where to place a mark. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:HANDSHAKEType? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:HANDSHAKEType? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:HANDSHAKEType value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:HANDSHAKEType {ACK|ANY|NAK|NYET|STALL}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:HANDSHAKEType?

Info

ACK specifies the handshake type as Acknowledgement (positive) (XX10).
ANY specifies the handshake type as Any (0010).
NAK specifies the handshake type as Negative Acknowledgment (1010).
NYET specifies the handshake type as No response Yet (0110).
STALL specifies the handshake type as Stall (endpoint is halted or control pipe request not supported) (1110).

SearchSearchItemTriggerABusUsbLongorderedset ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:LONGORDERedset command.

Description

This command sets or queries the USB bus search trigger long ordered set. The search number is specified by x.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:LONGORDERedset? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:LONGORDERedset? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:LONGORDERedset value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:LONGORDERedset {EIE|TS<x>}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:LONGORDERedset?

Info

EIE is the Electrical Idle Exit ordered set.
TS1 is the Training Sequence 1 ordered set.
TS2 is the Training Sequence 2 ordered set.

SearchSearchItemTriggerABusUsbPackets ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:PACKets command.

Description

Sets or queries the USB bus search packets to mark. This setting only applies when search type is set to Packets. This setting is only available when the USB bitrate is set to SS.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:PACKets? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:PACKets? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:PACKets value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:PACKets {LMP|TP|DP|ITP}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:PACKets?

Info

LMP mark LMP packets.
TP mark TP packets.
DP mark DP packets.
ITP Mmark ITP packets.

Properties

.lmppackets: The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:PACKets:LMPPACKets command.
.tppackets: The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:PACKets:TPPACKets command.

lmppackets `property` ¶

lmppackets: SearchSearchItemTriggerABusUsbPacketsLmppackets

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:PACKets:LMPPACKets command.

Description

Sets or queries the LMP packets to mark when system is searching for LMP packets. This setting is only available when the USB bitrate is set to SS.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:PACKets:LMPPACKets? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:PACKets:LMPPACKets? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:PACKets:LMPPACKets value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:PACKets:LMPPACKets {ANY|LMPLink|LMPUtwo|LMPDevice|LMPConfig|LMPResponse}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:PACKets:LMPPACKets?

Info

ANY mark all LMP packets.
LMPLink mark only link packets.
LMPUtwo mark only U2 packets.
LMPDevice mark only Device packets.
LMPConfig mark only Config Packets.
LMPResponse mark only response packets.

tppackets `property` ¶

tppackets: SearchSearchItemTriggerABusUsbPacketsTppackets

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:PACKets:TPPACKets command.

Description

Sets or queries the TP packets to mark when the system is searching for TP packets. This setting is only available when the USB bitrate is set to SS.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:PACKets:TPPACKets? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:PACKets:TPPACKets? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:PACKets:TPPACKets value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:PACKets:TPPACKets {ANY|TPACK|TPNRDY|TPERDY|TPStatus|TPSTall|TPNotify|TPPing|TPResponse}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:PACKets:TPPACKets?

Info

ANY mark all TP packets.
TPACK mark all ACK packets.
TPNRDY mark al NRDY (not ready) packets.
TPERDY mark all ERDY packets.
TPStatus mark all status packets.
TPSTall mark all stall packets.
TPNotify mark all notify packets.
TPPing mark all ping packets.
TPResponse mark all response packets.

SearchSearchItemTriggerABusUsbPacketsLmppackets ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:PACKets:LMPPACKets command.

Description

Sets or queries the LMP packets to mark when system is searching for LMP packets. This setting is only available when the USB bitrate is set to SS.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:PACKets:LMPPACKets? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:PACKets:LMPPACKets? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:PACKets:LMPPACKets value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:PACKets:LMPPACKets {ANY|LMPLink|LMPUtwo|LMPDevice|LMPConfig|LMPResponse}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:PACKets:LMPPACKets?

Info

ANY mark all LMP packets.
LMPLink mark only link packets.
LMPUtwo mark only U2 packets.
LMPDevice mark only Device packets.
LMPConfig mark only Config Packets.
LMPResponse mark only response packets.

SearchSearchItemTriggerABusUsbPacketsTppackets ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:PACKets:TPPACKets command.

Description

Sets or queries the TP packets to mark when the system is searching for TP packets. This setting is only available when the USB bitrate is set to SS.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:PACKets:TPPACKets? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:PACKets:TPPACKets? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:PACKets:TPPACKets value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:PACKets:TPPACKets {ANY|TPACK|TPNRDY|TPERDY|TPStatus|TPSTall|TPNotify|TPPing|TPResponse}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:PACKets:TPPACKets?

Info

ANY mark all TP packets.
TPACK mark all ACK packets.
TPNRDY mark al NRDY (not ready) packets.
TPERDY mark all ERDY packets.
TPStatus mark all status packets.
TPSTall mark all stall packets.
TPNotify mark all notify packets.
TPPing mark all ping packets.
TPResponse mark all response packets.

SearchSearchItemTriggerABusUsbPattern ¶

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:PATtern command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:PATtern? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:PATtern? query and raise an AssertionError if the returned value does not match value.

Properties

.char: The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:PATtern:CHAR<x> command.
.numsymbols: The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:PATtern:NUMSymbols command.
.orderedset: The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:PATtern:ORDERedset command.
.symbol: The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:PATtern:SYMbol command tree.

char `property` ¶

char: dict[int, SearchSearchItemTriggerABusUsbPatternCharItem]

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:PATtern:CHAR<x> command.

Description

Sets or queries the first, second, third or fourth character in the pattern for the specified search.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:PATtern:CHAR<x>? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:PATtern:CHAR<x>? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:PATtern:CHAR<x> value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:PATtern:CHAR<x> <string>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:PATtern:CHAR<x>?

Info

<string> is the character.

numsymbols `property` ¶

numsymbols: SearchSearchItemTriggerABusUsbPatternNumsymbols

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:PATtern:NUMSymbols command.

Description

Sets or queries the number of symbols to search for when USB search type is in pattern mode. This setting is only available when the USB bitrate is set to SS.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:PATtern:NUMSymbols? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:PATtern:NUMSymbols? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:PATtern:NUMSymbols value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:PATtern:NUMSymbols <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:PATtern:NUMSymbols?

orderedset `property` ¶

orderedset: SearchSearchItemTriggerABusUsbPatternOrderedset

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:PATtern:ORDERedset command.

Description

This command sets or queries the state of searching for an ordered set.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:PATtern:ORDERedset? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:PATtern:ORDERedset? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:PATtern:ORDERedset value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:PATtern:ORDERedset {ON|OFF|1|0}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:PATtern:ORDERedset?

Info

OFF disables searching for an ordered set.
ON enables searching for an ordered set.
0 disables searching for an ordered set.
1 enables searching for an ordered set.

symbol `property` ¶

symbol: SearchSearchItemTriggerABusUsbPatternSymbol

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:PATtern:SYMbol command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:PATtern:SYMbol? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:PATtern:SYMbol? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.minus: The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:PATtern:SYMbol:MINus<x> command.
.plus: The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:PATtern:SYMbol:PLUS<x> command.

SearchSearchItemTriggerABusUsbPatternCharItem ¶

Bases: ValidatedDynamicNumberCmd, SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:PATtern:CHAR<x> command.

Description

Sets or queries the first, second, third or fourth character in the pattern for the specified search.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:PATtern:CHAR<x>? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:PATtern:CHAR<x>? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:PATtern:CHAR<x> value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:PATtern:CHAR<x> <string>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:PATtern:CHAR<x>?

Info

<string> is the character.

SearchSearchItemTriggerABusUsbPatternNumsymbols ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:PATtern:NUMSymbols command.

Description

Sets or queries the number of symbols to search for when USB search type is in pattern mode. This setting is only available when the USB bitrate is set to SS.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:PATtern:NUMSymbols? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:PATtern:NUMSymbols? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:PATtern:NUMSymbols value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:PATtern:NUMSymbols <NR1>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:PATtern:NUMSymbols?

SearchSearchItemTriggerABusUsbPatternOrderedset ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:PATtern:ORDERedset command.

Description

This command sets or queries the state of searching for an ordered set.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:PATtern:ORDERedset? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:PATtern:ORDERedset? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:PATtern:ORDERedset value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:PATtern:ORDERedset {ON|OFF|1|0}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:PATtern:ORDERedset?

Info

OFF disables searching for an ordered set.
ON enables searching for an ordered set.
0 disables searching for an ordered set.
1 enables searching for an ordered set.

SearchSearchItemTriggerABusUsbPatternSymbol ¶

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:PATtern:SYMbol command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:PATtern:SYMbol? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:PATtern:SYMbol? query and raise an AssertionError if the returned value does not match value.

Properties

.minus: The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:PATtern:SYMbol:MINus<x> command.
.plus: The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:PATtern:SYMbol:PLUS<x> command.

minus `property` ¶

minus: dict[int, SearchSearchItemTriggerABusUsbPatternSymbolMinusItem]

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:PATtern:SYMbol:MINus<x> command.

Description

Sets or queries the specified character bit pattern (negative disparity) for the specified search.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:PATtern:SYMbol:MINus<x>? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:PATtern:SYMbol:MINus<x>? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:PATtern:SYMbol:MINus<x> value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:PATtern:SYMbol:MINus<x> <string>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:PATtern:SYMbol:MINus<x>?

Info

<string> is the character bit pattern.

plus `property` ¶

plus: dict[int, SearchSearchItemTriggerABusUsbPatternSymbolPlusItem]

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:PATtern:SYMbol:PLUS<x> command.

Description

Sets or queries the specified character bit pattern (positive disparity) for the specified search.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:PATtern:SYMbol:PLUS<x>? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:PATtern:SYMbol:PLUS<x>? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:PATtern:SYMbol:PLUS<x> value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:PATtern:SYMbol:PLUS<x> <string>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:PATtern:SYMbol:PLUS<x>?

SearchSearchItemTriggerABusUsbPatternSymbolMinusItem ¶

Bases: ValidatedDynamicNumberCmd, SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:PATtern:SYMbol:MINus<x> command.

Description

Sets or queries the specified character bit pattern (negative disparity) for the specified search.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:PATtern:SYMbol:MINus<x>? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:PATtern:SYMbol:MINus<x>? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:PATtern:SYMbol:MINus<x> value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:PATtern:SYMbol:MINus<x> <string>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:PATtern:SYMbol:MINus<x>?

Info

<string> is the character bit pattern.

SearchSearchItemTriggerABusUsbPatternSymbolPlusItem ¶

Bases: ValidatedDynamicNumberCmd, SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:PATtern:SYMbol:PLUS<x> command.

Description

Sets or queries the specified character bit pattern (positive disparity) for the specified search.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:PATtern:SYMbol:PLUS<x>? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:PATtern:SYMbol:PLUS<x>? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:PATtern:SYMbol:PLUS<x> value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:PATtern:SYMbol:PLUS<x> <string>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:PATtern:SYMbol:PLUS<x>?

SearchSearchItemTriggerABusUsbQualifier ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:QUAlifier command.

Description

This command sets or queries the qualifier for address and data for the specified bus trigger search to determine where to place a mark. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:QUAlifier? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:QUAlifier? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:QUAlifier value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:QUAlifier {EQUal|INrange|LESSEQual|MOREEQual|OUTrange|UNEQual|LESSThan|MOREThan}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:QUAlifier?

Info

EQUal specifies the qualifier as Equal.
INrange specifies the qualifier as Inside Range.
LESSEQual specifies the qualifier as Less Than or Equal to.
MOREEQual specifies the qualifier as More Than or Equal to.
OUTrange specifies the qualifier as Out of Range.
UNEQual specifies the qualifier as Unequal.
LESSThan specifies the qualifier as Less Than.
MOREThan specifies the qualifier as More Than.

SearchSearchItemTriggerABusUsbSof ¶

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SOF command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SOF? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SOF? query and raise an AssertionError if the returned value does not match value.

Properties

.format: The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SOF:FORMat command.
.framenumber: The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SOF:FRAMENUMber command.

format `property` ¶

format: SearchSearchItemTriggerABusUsbSofFormat

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SOF:FORMat command.

Description

This command sets or queries the format for the Start of Frame frame number for the specified USB bus trigger search to determine where to place a mark. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SOF:FORMat? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SOF:FORMat? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SOF:FORMat value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SOF:FORMat {BINary|HEXadecimal|SYMBolic}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SOF:FORMat?

Info

BINary specifies the format as Binary.
HEXadecimal specifies the format as Hexadecimal.
SYMBolic specifies the format as Symbolic.

framenumber `property` ¶

framenumber: SearchSearchItemTriggerABusUsbSofFramenumber

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SOF:FRAMENUMber command.

Description

This command sets or queries the frame number string to use for the Start of Frame for the specified USB bus trigger search to determine where to place a mark. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SOF:FRAMENUMber? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SOF:FRAMENUMber? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SOF:FRAMENUMber value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SOF:FRAMENUMber <string>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SOF:FRAMENUMber?

Info

<string> specifies the frame number string for the Start of Frame in a valid format (binary, hexadecimal, or symbolic).

SearchSearchItemTriggerABusUsbSofFormat ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SOF:FORMat command.

Description

This command sets or queries the format for the Start of Frame frame number for the specified USB bus trigger search to determine where to place a mark. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SOF:FORMat? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SOF:FORMat? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SOF:FORMat value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SOF:FORMat {BINary|HEXadecimal|SYMBolic}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SOF:FORMat?

Info

BINary specifies the format as Binary.
HEXadecimal specifies the format as Hexadecimal.
SYMBolic specifies the format as Symbolic.

SearchSearchItemTriggerABusUsbSofFramenumber ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SOF:FRAMENUMber command.

Description

This command sets or queries the frame number string to use for the Start of Frame for the specified USB bus trigger search to determine where to place a mark. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SOF:FRAMENUMber? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SOF:FRAMENUMber? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SOF:FRAMENUMber value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SOF:FRAMENUMber <string>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SOF:FRAMENUMber?

Info

<string> specifies the frame number string for the Start of Frame in a valid format (binary, hexadecimal, or symbolic).

SearchSearchItemTriggerABusUsbSpecialtype ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPECIALType command.

Description

This command sets or queries the PID value for the specified USB bus trigger search to determine where to place a mark. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPECIALType? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPECIALType? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPECIALType value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPECIALType {ANY|ERR|PING|PRE|RESERVED|SPLIT}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPECIALType?

Info

ANY specifies the PID value as Any (XX00).
ERR specifies the PID value as ERR (1100).
PING specifies the PID value as PING (0100).
PRE specifies the PID value as PRE (1100).
RESERVED specifies the PID value as Reserved (0000).
SPLIT specifies the PID value as Split (1000).

SearchSearchItemTriggerABusUsbSplit ¶

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT? query and raise an AssertionError if the returned value does not match value.

Properties

.et: The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:ET command tree.
.hub: The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:HUB command tree.
.port: The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:PORT command tree.
.sc: The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:SC command tree.
.se: The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:SE command tree.

et `property` ¶

et: SearchSearchItemTriggerABusUsbSplitEt

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:ET command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:ET? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:ET? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:ET:VALue command.

hub `property` ¶

hub: SearchSearchItemTriggerABusUsbSplitHub

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:HUB command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:HUB? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:HUB? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.format: The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:HUB:FORMat command.
.value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:HUB:VALue command.

port `property` ¶

port: SearchSearchItemTriggerABusUsbSplitPort

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:PORT command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:PORT? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:PORT? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.format: The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:PORT:FORMat command.
.value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:PORT:VALue command.

sc `property` ¶

sc: SearchSearchItemTriggerABusUsbSplitSc

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:SC command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:SC? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:SC? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:SC:VALue command.

se `property` ¶

se: SearchSearchItemTriggerABusUsbSplitSe

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:SE command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:SE? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:SE? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:SE:VALue command.

SearchSearchItemTriggerABusUsbSplitEt ¶

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:ET command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:ET? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:ET? query and raise an AssertionError if the returned value does not match value.

Properties

.value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:ET:VALue command.

value `property` ¶

value: SearchSearchItemTriggerABusUsbSplitEtValue

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:ET:VALue command.

Description

This command sets or queries the Endpoint Type value for the specified USB bus trigger search on split token field to determine where to place a mark. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:ET:VALue? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:ET:VALue? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:ET:VALue value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:ET:VALue {BULK|CONTROL|DONTCare|INTERRUPT|ISOchronous}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:ET:VALue?

Info

BULK specifies the Endpoint Type value as Bulk (10).
CONTROL specifies the Endpoint Type value as Control (00).
DONTCare specifies the Endpoint Type value as Don’t Care.
INTERRUPT specifies the Endpoint Type value as Interrupt (11).
ISOchronous specifies the Endpoint Type value as Isochronous (01).

SearchSearchItemTriggerABusUsbSplitEtValue ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:ET:VALue command.

Description

This command sets or queries the Endpoint Type value for the specified USB bus trigger search on split token field to determine where to place a mark. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:ET:VALue? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:ET:VALue? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:ET:VALue value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:ET:VALue {BULK|CONTROL|DONTCare|INTERRUPT|ISOchronous}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:ET:VALue?

Info

BULK specifies the Endpoint Type value as Bulk (10).
CONTROL specifies the Endpoint Type value as Control (00).
DONTCare specifies the Endpoint Type value as Don’t Care.
INTERRUPT specifies the Endpoint Type value as Interrupt (11).
ISOchronous specifies the Endpoint Type value as Isochronous (01).

SearchSearchItemTriggerABusUsbSplitHub ¶

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:HUB command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:HUB? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:HUB? query and raise an AssertionError if the returned value does not match value.

Properties

.format: The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:HUB:FORMat command.
.value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:HUB:VALue command.

format `property` ¶

format: SearchSearchItemTriggerABusUsbSplitHubFormat

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:HUB:FORMat command.

Description

This command sets or queries the format for the hub address of the specified USB bus trigger search on split token field to determine where to place a mark. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:HUB:FORMat? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:HUB:FORMat? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:HUB:FORMat value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:HUB:FORMat {BINary|HEXadecimal}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:HUB:FORMat?

Info

BINary specifies the hub address format as Binary.
HEXadecimal specifies the hub address format as Hexadecimal.

value `property` ¶

value: SearchSearchItemTriggerABusUsbSplitHubValue

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:HUB:VALue command.

Description

This command sets or queries the hub address of the specified USB bus trigger on split token field search to determine where to place a mark. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:HUB:VALue? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:HUB:VALue? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:HUB:VALue value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:HUB:VALue <string>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:HUB:VALue?

Info

<string> specifies the hub address. The valid characters are .

SearchSearchItemTriggerABusUsbSplitHubFormat ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:HUB:FORMat command.

Description

This command sets or queries the format for the hub address of the specified USB bus trigger search on split token field to determine where to place a mark. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:HUB:FORMat? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:HUB:FORMat? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:HUB:FORMat value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:HUB:FORMat {BINary|HEXadecimal}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:HUB:FORMat?

Info

BINary specifies the hub address format as Binary.
HEXadecimal specifies the hub address format as Hexadecimal.

SearchSearchItemTriggerABusUsbSplitHubValue ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:HUB:VALue command.

Description

This command sets or queries the hub address of the specified USB bus trigger on split token field search to determine where to place a mark. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:HUB:VALue? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:HUB:VALue? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:HUB:VALue value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:HUB:VALue <string>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:HUB:VALue?

Info

<string> specifies the hub address. The valid characters are .

SearchSearchItemTriggerABusUsbSplitPort ¶

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:PORT command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:PORT? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:PORT? query and raise an AssertionError if the returned value does not match value.

Properties

.format: The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:PORT:FORMat command.
.value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:PORT:VALue command.

format `property` ¶

format: SearchSearchItemTriggerABusUsbSplitPortFormat

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:PORT:FORMat command.

Description

This command sets or queries the port address format for the specified USB bus trigger on split token field search to determine where to place a mark. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:PORT:FORMat? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:PORT:FORMat? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:PORT:FORMat value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:PORT:FORMat {BINary|HEXadecimal}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:PORT:FORMat?

Info

BINary specifies the port address format as Binary.
HEXadecicmal specifies the port address format as Hexadecimal.

value `property` ¶

value: SearchSearchItemTriggerABusUsbSplitPortValue

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:PORT:VALue command.

Description

This command sets or queries the port address for the specified USB bus trigger on split token field search to determine where to place a mark. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:PORT:VALue? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:PORT:VALue? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:PORT:VALue value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:PORT:VALue <string>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:PORT:VALue?

Info

<string> specifies the port address in the valid format. The valid characters are.

SearchSearchItemTriggerABusUsbSplitPortFormat ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:PORT:FORMat command.

Description

This command sets or queries the port address format for the specified USB bus trigger on split token field search to determine where to place a mark. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:PORT:FORMat? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:PORT:FORMat? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:PORT:FORMat value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:PORT:FORMat {BINary|HEXadecimal}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:PORT:FORMat?

Info

BINary specifies the port address format as Binary.
HEXadecicmal specifies the port address format as Hexadecimal.

SearchSearchItemTriggerABusUsbSplitPortValue ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:PORT:VALue command.

Description

This command sets or queries the port address for the specified USB bus trigger on split token field search to determine where to place a mark. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:PORT:VALue? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:PORT:VALue? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:PORT:VALue value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:PORT:VALue <string>
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:PORT:VALue?

Info

<string> specifies the port address in the valid format. The valid characters are.

SearchSearchItemTriggerABusUsbSplitSc ¶

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:SC command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:SC? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:SC? query and raise an AssertionError if the returned value does not match value.

Properties

.value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:SC:VALue command.

value `property` ¶

value: SearchSearchItemTriggerABusUsbSplitScValue

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:SC:VALue command.

Description

This command sets or queries the Start/Complete value for the specified USB bus trigger on split token field search to determine where to place a mark. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:SC:VALue? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:SC:VALue? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:SC:VALue value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:SC:VALue {CSPLIT|DONTCare|SSPLIT}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:SC:VALue?

Info

CSPLIT specifies Complete (CSPLIT)(1) Start/Complete value.
DONTCare specifies the Start/Complete value as Don’t Care (X).
SSPLIT specifies Start (SSPLIT) (0) Start/Complete value.

SearchSearchItemTriggerABusUsbSplitScValue ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:SC:VALue command.

Description

This command sets or queries the Start/Complete value for the specified USB bus trigger on split token field search to determine where to place a mark. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:SC:VALue? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:SC:VALue? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:SC:VALue value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:SC:VALue {CSPLIT|DONTCare|SSPLIT}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:SC:VALue?

Info

CSPLIT specifies Complete (CSPLIT)(1) Start/Complete value.
DONTCare specifies the Start/Complete value as Don’t Care (X).
SSPLIT specifies Start (SSPLIT) (0) Start/Complete value.

SearchSearchItemTriggerABusUsbSplitSe ¶

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:SE command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:SE? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:SE? query and raise an AssertionError if the returned value does not match value.

Properties

.value: The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:SE:VALue command.

value `property` ¶

value: SearchSearchItemTriggerABusUsbSplitSeValue

Return the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:SE:VALue command.

Description

This command sets or queries the Start/End value for the specified USB bus trigger on split token field search to determine where to place a mark. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:SE:VALue? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:SE:VALue? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:SE:VALue value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:SE:VALue {DONTCare|FULLSPeed|ISOALL|ISOEND|ISOMID|ISOSTART|LOWSPeed}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:SE:VALue?

Info

DONTCare specifies Don’t Care (X) Start/End bit value.
FULLSPeed specifies Control/Bulk/Interrupt Full Speed device (0X) Start/End bit value.
ISOALL specifies Isochronous Data is All (11) Start/End bit value.
ISOEND specifies Isochronous Data is End (01) Start/End bit value.
ISOMID specifies Isochronous Data is Middle (00) Start/End bit value.
ISOSTART specifies Isochronous Data is Start (10) Start/End bit value.
LOWSPeed specifies Control/Bulk/Interrupt Low Speed device (1X) Start/End bit value.

SearchSearchItemTriggerABusUsbSplitSeValue ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:SE:VALue command.

Description

This command sets or queries the Start/End value for the specified USB bus trigger on split token field search to determine where to place a mark. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:SE:VALue? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:SE:VALue? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:SE:VALue value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:SE:VALue {DONTCare|FULLSPeed|ISOALL|ISOEND|ISOMID|ISOSTART|LOWSPeed}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:SE:VALue?

Info

DONTCare specifies Don’t Care (X) Start/End bit value.
FULLSPeed specifies Control/Bulk/Interrupt Full Speed device (0X) Start/End bit value.
ISOALL specifies Isochronous Data is All (11) Start/End bit value.
ISOEND specifies Isochronous Data is End (01) Start/End bit value.
ISOMID specifies Isochronous Data is Middle (00) Start/End bit value.
ISOSTART specifies Isochronous Data is Start (10) Start/End bit value.
LOWSPeed specifies Control/Bulk/Interrupt Low Speed device (1X) Start/End bit value.

SearchSearchItemTriggerABusUsbTokentype ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:TOKENType command.

Description

This command sets or queries the token type when the specified USB bus trigger search to determine where to place a mark. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:TOKENType? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:TOKENType? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:TOKENType value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:TOKENType {ANY|IN|OUT|SETUP|SOF}
- SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:TOKENType?

Info

ANY specifies the token type as Any (XX01).
IN specifies the token type as IN (1001).
OUT specifies the token type as OUT (0001).
SETUP specifies the token type as SETUP (1101).
SOF specifies the token type as Start Of Frame (0101).

SearchSearchItemTriggerADdrmemory ¶

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:DDRMemory command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:DDRMemory? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:DDRMemory? query and raise an AssertionError if the returned value does not match value.

Properties

.autobitrate: The SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:AUTOBitrate command.
.autoreflevel: The SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:AUTOReflevel command.
.bitrate: The SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:BITRate command.
.csactive: The SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:CSActive command.
.cslevel: The SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:CSLevel command.
.csmode: The SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:CSMode command.
.cssource: The SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:CSSource command.
.datasource: The SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:DATASource command.
.hysteresis: The SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:HYSteresis command.
.margin: The SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:MARgin command.
.maxcas: The SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:MAXCas command.
.mincas: The SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:MINCas command.
.reflevel: The SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:REFLevel command tree.
.standard: The SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:STANdard command.
.strobesource: The SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:STROBEsource command.

autobitrate `property` ¶

autobitrate: SearchSearchItemTriggerADdrmemoryAutobitrate

Return the SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:AUTOBitrate command.

Description

This command sets or queries the auto bit rate value for a DDR Memory analysis search to determine where to place a mark. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:AUTOBitrate? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:AUTOBitrate? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:AUTOBitrate value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:AUTOBitrate {AUTO|CUSTom|DDR200|DDR266|DDR333|DDR370|DDR400|DDR533|DDR667|DDR800|DDR1066|DDR1200|DDR1333|DDR1466|DDR1600|DDR1866|DDR2133|DDR2400|DDR2666|DDR3200|DDR4000|DDR4800|DDR5000|DDR5500}
- SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:AUTOBitrate?

Info

AUTO sets the auto bit rate to auto. When auto is selected, the instrument determines the bit rate from the applied signal.
CUSTom sets the auto bit rate to custom. When custom is selected, you set the bit rate value.
DDR200 - DDR5500 sets the bit rate appropriate for the specified standard.

autoreflevel `property` ¶

autoreflevel: SearchSearchItemTriggerADdrmemoryAutoreflevel

Return the SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:AUTOReflevel command.

Description

This command sets or queries the reference levels for a DDR Memory analysis search to determine where to place a mark. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:AUTOReflevel? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:AUTOReflevel? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:AUTOReflevel value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:AUTOReflevel {AUTO|CUSTom}
- SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:AUTOReflevel?

Info

AUTO sets the reference levels to auto. When auto is selected, the instrument determines the reference level from the applied signal.
CUSTom sets the reference levels to custom. When custom is selected, you set the reference level.

bitrate `property` ¶

bitrate: SearchSearchItemTriggerADdrmemoryBitrate

Return the SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:BITRate command.

Description

This command sets or queries the data rate value for a DDR Memory analysis search to determine where to place a mark. You can set the bit rate only when AUTOBITRATE is Custom. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:BITRate? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:BITRate? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:BITRate value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:BITRate <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:BITRate?

Info

<NR3> specifies the DDR data rate in bits per second.

csactive `property` ¶

csactive: SearchSearchItemTriggerADdrmemoryCsactive

Return the SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:CSActive command.

Description

This command sets or queries whether the expected chip-select will be an active HIGH or LOW.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:CSActive? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:CSActive? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:CSActive value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:CSActive {HIGH|LOW}
- SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:CSActive?

Info

HIGH sets the search to look for an active HIGH.
LOW sets the search to look for an active HIGH.

cslevel `property` ¶

cslevel: SearchSearchItemTriggerADdrmemoryCslevel

Return the SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:CSLevel command.

Description

This command sets or queries the DDR memory search chip-select level.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:CSLevel? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:CSLevel? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:CSLevel value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:CSLevel <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:CSLevel?

Info

<NR3> is the amount of chip-select level in volts.

csmode `property` ¶

csmode: SearchSearchItemTriggerADdrmemoryCsmode

Return the SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:CSMode command.

Description

This command sets or queries the chip-select mode for DDR memory searches.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:CSMode? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:CSMode? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:CSMode value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:CSMode {AUTO|MANual}
- SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:CSMode?

Info

AUTO mode calculates the chip-select level for you.
MANUAL lets you manually set the chip-select level.

cssource `property` ¶

cssource: SearchSearchItemTriggerADdrmemoryCssource

Return the SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:CSSource command.

Description

This command sets or queries the chip select source for DDR memory searches.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:CSSource? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:CSSource? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:CSSource value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:CSSource {CH<x>|MATH<x>|REF<x>|NONe}
- SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:CSSource?

Info

CH<x> specifies one input channel as the search source, where is the channel number and can be 1, 2, 3, or 4.
MATH<x> specifies the math waveform as the search source, where = 1, 2, 3 or 4.
REF<x> specifies the reference waveform as the search source, where = 1, 2, 3 or 4.
NONe specifies no CSSource.

datasource `property` ¶

datasource: SearchSearchItemTriggerADdrmemoryDatasource

Return the SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:DATASource command.

Description

This command sets or queries the data source for a DDR Memory analysis search to determine where to place a mark. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:DATASource? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:DATASource? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:DATASource value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:DATASource {CH<x>|MATH<x>|REF<x>}
- SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:DATASource?

Info

CH<x> specifies one input channel as the search source, where is the channel number.
MATH<x> specifies the math waveform as the search source, where = 1, 2, 3 or 4.
REF<x> specifies the reference waveform as the search source, where = 1, 2, 3 or 4.

hysteresis `property` ¶

hysteresis: SearchSearchItemTriggerADdrmemoryHysteresis

Return the SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:HYSteresis command.

Description

This command sets or queries the hysteresis percent for DDR memory searches.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:HYSteresis? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:HYSteresis? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:HYSteresis value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:HYSteresis <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:HYSteresis?

Info

<NR3> is the hysteresis amount in percent.

margin `property` ¶

margin: SearchSearchItemTriggerADdrmemoryMargin

Return the SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:MARgin command.

Description

This command sets or queries the termination logic margin for back-to-back writes.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:MARgin? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:MARgin? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:MARgin value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:MARgin <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:MARgin?

Info

<NR3> is the termination logic margin in percent.

maxcas `property` ¶

maxcas: SearchSearchItemTriggerADdrmemoryMaxcas

Return the SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:MAXCas command.

Description

This command sets or queries the maximum distance in clock periods, to the left of the start of the mark where the instrument looks for the chip-select pulse.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:MAXCas? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:MAXCas? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:MAXCas value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:MAXCas <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:MAXCas?

Info

<NR3> is the maximum distance in clock periods, to the left of the start of the mark where the instrument looks for the chip-select pulse.

mincas `property` ¶

mincas: SearchSearchItemTriggerADdrmemoryMincas

Return the SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:MINCas command.

Description

This command sets or queries the minimum distance in clock periods, to the left of the start of the mark where the instrument looks for the chip-select pulse.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:MINCas? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:MINCas? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:MINCas value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:MINCas <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:MINCas?

Info

<NR3> is the minimum distance in clock periods, to the left of the start of the mark where the instrument looks for the chip-select pulse.

reflevel `property` ¶

reflevel: SearchSearchItemTriggerADdrmemoryReflevel

Return the SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:REFLevel command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:REFLevel? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:REFLevel? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.data: The SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:REFLevel:DATa command tree.
.strobe: The SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:REFLevel:STROBE command tree.

standard `property` ¶

standard: SearchSearchItemTriggerADdrmemoryStandard

Return the SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:STANdard command.

Description

This command sets or queries the DDR standard for a DDR Memory analysis search to determine where to place a mark. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:STANdard? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:STANdard? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:STANdard value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:STANdard {DDR|DDR2|DDR3|GDDR3|LPDDR|DDR3L|DDR4|LPDDR3}
- SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:STANdard?

Info

<DDR> sets the DDR standard type to DDR.
<DDR2> sets the DDR standard type to DDR2.
<DDR3> sets the DDR standard type to DDR3.
<GDDR3> sets the DDR standard type to GDDR3.
<LPDDR> sets the DDR standard type to LPDDR.
<DDR3L> sets the DDR standard type to DDR3L.
<DDR4> sets the DDR standard type to DDR4.
<LPDDR3> sets the DDR standard type to LPDDR3.

strobesource `property` ¶

strobesource: SearchSearchItemTriggerADdrmemoryStrobesource

Return the SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:STROBEsource command.

Description

This command sets or queries the strobe source for a DDR Memory analysis search to determine where to place a mark. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:STROBEsource? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:STROBEsource? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:STROBEsource value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:STROBEsource {CH<x>|MATH<x>|REF<x>}
- SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:STROBEsource?

Info

CH<x> specifies the input channel as the search source, where is the channel number.
MATH<x> specifies the math waveform as the search source, where = 1, 2, 3 or 4.
REF<x> specifies the reference waveform as the search source, where = 1, 2, 3 or 4.

SearchSearchItemTriggerADdrmemoryAutobitrate ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:AUTOBitrate command.

Description

This command sets or queries the auto bit rate value for a DDR Memory analysis search to determine where to place a mark. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:AUTOBitrate? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:AUTOBitrate? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:AUTOBitrate value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:AUTOBitrate {AUTO|CUSTom|DDR200|DDR266|DDR333|DDR370|DDR400|DDR533|DDR667|DDR800|DDR1066|DDR1200|DDR1333|DDR1466|DDR1600|DDR1866|DDR2133|DDR2400|DDR2666|DDR3200|DDR4000|DDR4800|DDR5000|DDR5500}
- SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:AUTOBitrate?

Info

AUTO sets the auto bit rate to auto. When auto is selected, the instrument determines the bit rate from the applied signal.
CUSTom sets the auto bit rate to custom. When custom is selected, you set the bit rate value.
DDR200 - DDR5500 sets the bit rate appropriate for the specified standard.

SearchSearchItemTriggerADdrmemoryAutoreflevel ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:AUTOReflevel command.

Description

This command sets or queries the reference levels for a DDR Memory analysis search to determine where to place a mark. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:AUTOReflevel? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:AUTOReflevel? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:AUTOReflevel value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:AUTOReflevel {AUTO|CUSTom}
- SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:AUTOReflevel?

Info

AUTO sets the reference levels to auto. When auto is selected, the instrument determines the reference level from the applied signal.
CUSTom sets the reference levels to custom. When custom is selected, you set the reference level.

SearchSearchItemTriggerADdrmemoryBitrate ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:BITRate command.

Description

This command sets or queries the data rate value for a DDR Memory analysis search to determine where to place a mark. You can set the bit rate only when AUTOBITRATE is Custom. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:BITRate? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:BITRate? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:BITRate value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:BITRate <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:BITRate?

Info

<NR3> specifies the DDR data rate in bits per second.

SearchSearchItemTriggerADdrmemoryCsactive ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:CSActive command.

Description

This command sets or queries whether the expected chip-select will be an active HIGH or LOW.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:CSActive? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:CSActive? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:CSActive value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:CSActive {HIGH|LOW}
- SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:CSActive?

Info

HIGH sets the search to look for an active HIGH.
LOW sets the search to look for an active HIGH.

SearchSearchItemTriggerADdrmemoryCslevel ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:CSLevel command.

Description

This command sets or queries the DDR memory search chip-select level.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:CSLevel? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:CSLevel? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:CSLevel value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:CSLevel <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:CSLevel?

Info

<NR3> is the amount of chip-select level in volts.

SearchSearchItemTriggerADdrmemoryCsmode ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:CSMode command.

Description

This command sets or queries the chip-select mode for DDR memory searches.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:CSMode? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:CSMode? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:CSMode value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:CSMode {AUTO|MANual}
- SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:CSMode?

Info

AUTO mode calculates the chip-select level for you.
MANUAL lets you manually set the chip-select level.

SearchSearchItemTriggerADdrmemoryCssource ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:CSSource command.

Description

This command sets or queries the chip select source for DDR memory searches.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:CSSource? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:CSSource? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:CSSource value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:CSSource {CH<x>|MATH<x>|REF<x>|NONe}
- SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:CSSource?

Info

CH<x> specifies one input channel as the search source, where is the channel number and can be 1, 2, 3, or 4.
MATH<x> specifies the math waveform as the search source, where = 1, 2, 3 or 4.
REF<x> specifies the reference waveform as the search source, where = 1, 2, 3 or 4.
NONe specifies no CSSource.

SearchSearchItemTriggerADdrmemoryDatasource ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:DATASource command.

Description

This command sets or queries the data source for a DDR Memory analysis search to determine where to place a mark. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:DATASource? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:DATASource? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:DATASource value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:DATASource {CH<x>|MATH<x>|REF<x>}
- SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:DATASource?

Info

CH<x> specifies one input channel as the search source, where is the channel number.
MATH<x> specifies the math waveform as the search source, where = 1, 2, 3 or 4.
REF<x> specifies the reference waveform as the search source, where = 1, 2, 3 or 4.

SearchSearchItemTriggerADdrmemoryHysteresis ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:HYSteresis command.

Description

This command sets or queries the hysteresis percent for DDR memory searches.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:HYSteresis? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:HYSteresis? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:HYSteresis value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:HYSteresis <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:HYSteresis?

Info

<NR3> is the hysteresis amount in percent.

SearchSearchItemTriggerADdrmemoryMargin ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:MARgin command.

Description

This command sets or queries the termination logic margin for back-to-back writes.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:MARgin? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:MARgin? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:MARgin value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:MARgin <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:MARgin?

Info

<NR3> is the termination logic margin in percent.

SearchSearchItemTriggerADdrmemoryMaxcas ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:MAXCas command.

Description

This command sets or queries the maximum distance in clock periods, to the left of the start of the mark where the instrument looks for the chip-select pulse.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:MAXCas? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:MAXCas? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:MAXCas value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:MAXCas <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:MAXCas?

Info

<NR3> is the maximum distance in clock periods, to the left of the start of the mark where the instrument looks for the chip-select pulse.

SearchSearchItemTriggerADdrmemoryMincas ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:MINCas command.

Description

This command sets or queries the minimum distance in clock periods, to the left of the start of the mark where the instrument looks for the chip-select pulse.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:MINCas? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:MINCas? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:MINCas value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:MINCas <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:MINCas?

Info

<NR3> is the minimum distance in clock periods, to the left of the start of the mark where the instrument looks for the chip-select pulse.

SearchSearchItemTriggerADdrmemoryReflevel ¶

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:REFLevel command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:REFLevel? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:REFLevel? query and raise an AssertionError if the returned value does not match value.

Properties

.data: The SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:REFLevel:DATa command tree.
.strobe: The SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:REFLevel:STROBE command tree.

data `property` ¶

data: SearchSearchItemTriggerADdrmemoryReflevelData

Return the SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:REFLevel:DATa command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:REFLevel:DATa? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:REFLevel:DATa? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.high: The SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:REFLevel:DATa:HIGH command.
.low: The SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:REFLevel:DATa:LOW command.
.mid: The SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:REFLevel:DATa:MID command.

strobe `property` ¶

strobe: SearchSearchItemTriggerADdrmemoryReflevelStrobe

Return the SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:REFLevel:STROBE command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:REFLevel:STROBE? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:REFLevel:STROBE? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.high: The SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:REFLevel:STROBE:HIGH command.
.low: The SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:REFLevel:STROBE:LOW command.
.mid: The SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:REFLevel:STROBE:MID command.

SearchSearchItemTriggerADdrmemoryReflevelData ¶

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:REFLevel:DATa command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:REFLevel:DATa? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:REFLevel:DATa? query and raise an AssertionError if the returned value does not match value.

Properties

.high: The SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:REFLevel:DATa:HIGH command.
.low: The SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:REFLevel:DATa:LOW command.
.mid: The SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:REFLevel:DATa:MID command.

high `property` ¶

high: SearchSearchItemTriggerADdrmemoryReflevelDataHigh

Return the SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:REFLevel:DATa:HIGH command.

Description

This command sets or queries the value of the data HIGH reference level for a DDR Memory analysis search to determine where to place a mark. You can set the value only when AUTOREFLEVEL is Custom. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:REFLevel:DATa:HIGH? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:REFLevel:DATa:HIGH? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:REFLevel:DATa:HIGH value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:REFLevel:DATa:HIGH <NRF>
- SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:REFLevel:DATa:HIGH?

Info

<NRF> specifies the value of the data HIGH reference level in volts.

low `property` ¶

low: SearchSearchItemTriggerADdrmemoryReflevelDataLow

Return the SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:REFLevel:DATa:LOW command.

Description

This command sets or queries the value of the data LOW reference level for a DDR Memory analysis search to determine where to place a mark. You can set the value only when AUTOREFLEVEL is Custom. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:REFLevel:DATa:LOW? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:REFLevel:DATa:LOW? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:REFLevel:DATa:LOW value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:REFLevel:DATa:LOW <NRF>
- SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:REFLevel:DATa:LOW?

Info

<NRF> specifies the value of the data LOW reference level in volts.

mid `property` ¶

mid: SearchSearchItemTriggerADdrmemoryReflevelDataMid

Return the SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:REFLevel:DATa:MID command.

Description

This command sets or queries the value of the data MID reference level for a DDR Memory analysis search to determine where to place a mark. You can set the value only when AUTOREFLEVEL is Custom. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:REFLevel:DATa:MID? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:REFLevel:DATa:MID? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:REFLevel:DATa:MID value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:REFLevel:DATa:MID <NRF>
- SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:REFLevel:DATa:MID?

Info

<NRF> specifies the value of the data MID reference level in volts.

SearchSearchItemTriggerADdrmemoryReflevelDataHigh ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:REFLevel:DATa:HIGH command.

Description

This command sets or queries the value of the data HIGH reference level for a DDR Memory analysis search to determine where to place a mark. You can set the value only when AUTOREFLEVEL is Custom. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:REFLevel:DATa:HIGH? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:REFLevel:DATa:HIGH? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:REFLevel:DATa:HIGH value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:REFLevel:DATa:HIGH <NRF>
- SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:REFLevel:DATa:HIGH?

Info

<NRF> specifies the value of the data HIGH reference level in volts.

SearchSearchItemTriggerADdrmemoryReflevelDataLow ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:REFLevel:DATa:LOW command.

Description

This command sets or queries the value of the data LOW reference level for a DDR Memory analysis search to determine where to place a mark. You can set the value only when AUTOREFLEVEL is Custom. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:REFLevel:DATa:LOW? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:REFLevel:DATa:LOW? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:REFLevel:DATa:LOW value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:REFLevel:DATa:LOW <NRF>
- SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:REFLevel:DATa:LOW?

Info

<NRF> specifies the value of the data LOW reference level in volts.

SearchSearchItemTriggerADdrmemoryReflevelDataMid ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:REFLevel:DATa:MID command.

Description

This command sets or queries the value of the data MID reference level for a DDR Memory analysis search to determine where to place a mark. You can set the value only when AUTOREFLEVEL is Custom. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:REFLevel:DATa:MID? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:REFLevel:DATa:MID? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:REFLevel:DATa:MID value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:REFLevel:DATa:MID <NRF>
- SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:REFLevel:DATa:MID?

Info

<NRF> specifies the value of the data MID reference level in volts.

SearchSearchItemTriggerADdrmemoryReflevelStrobe ¶

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:REFLevel:STROBE command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:REFLevel:STROBE? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:REFLevel:STROBE? query and raise an AssertionError if the returned value does not match value.

Properties

.high: The SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:REFLevel:STROBE:HIGH command.
.low: The SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:REFLevel:STROBE:LOW command.
.mid: The SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:REFLevel:STROBE:MID command.

high `property` ¶

high: SearchSearchItemTriggerADdrmemoryReflevelStrobeHigh

Return the SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:REFLevel:STROBE:HIGH command.

Description

This command sets or queries the value of the strobe HIGH reference level for a DDR Memory analysis search to determine where to place a mark. You can set the value only when AUTOREFLEVEL is Custom. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:REFLevel:STROBE:HIGH? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:REFLevel:STROBE:HIGH? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:REFLevel:STROBE:HIGH value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:REFLevel:STROBE:HIGH <NRF>
- SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:REFLevel:STROBE:HIGH?

Info

<NRF> specifies the value of the strobe HIGH reference level in volts.

low `property` ¶

low: SearchSearchItemTriggerADdrmemoryReflevelStrobeLow

Return the SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:REFLevel:STROBE:LOW command.

Description

This command sets or queries the value of the strobe LOW reference level for a DDR Memory analysis search to determine where to place a mark. You can set the value only when AUTOREFLEVEL is Custom. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:REFLevel:STROBE:LOW? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:REFLevel:STROBE:LOW? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:REFLevel:STROBE:LOW value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:REFLevel:STROBE:LOW <NRF>
- SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:REFLevel:STROBE:LOW?

Info

<NRF> specifies the value of the strobe LOW reference level in volts.

mid `property` ¶

mid: SearchSearchItemTriggerADdrmemoryReflevelStrobeMid

Return the SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:REFLevel:STROBE:MID command.

Description

This command sets or queries the value of the strobe MID reference level for a DDR Memory analysis search to determine where to place a mark. You can set the value only when AUTOREFLEVEL is Custom. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:REFLevel:STROBE:MID? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:REFLevel:STROBE:MID? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:REFLevel:STROBE:MID value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:REFLevel:STROBE:MID <NRF>
- SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:REFLevel:STROBE:MID?

Info

<NRF> specifies the value of the strobe MID reference level in volts.

SearchSearchItemTriggerADdrmemoryReflevelStrobeHigh ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:REFLevel:STROBE:HIGH command.

Description

This command sets or queries the value of the strobe HIGH reference level for a DDR Memory analysis search to determine where to place a mark. You can set the value only when AUTOREFLEVEL is Custom. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:REFLevel:STROBE:HIGH? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:REFLevel:STROBE:HIGH? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:REFLevel:STROBE:HIGH value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:REFLevel:STROBE:HIGH <NRF>
- SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:REFLevel:STROBE:HIGH?

Info

<NRF> specifies the value of the strobe HIGH reference level in volts.

SearchSearchItemTriggerADdrmemoryReflevelStrobeLow ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:REFLevel:STROBE:LOW command.

Description

This command sets or queries the value of the strobe LOW reference level for a DDR Memory analysis search to determine where to place a mark. You can set the value only when AUTOREFLEVEL is Custom. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:REFLevel:STROBE:LOW? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:REFLevel:STROBE:LOW? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:REFLevel:STROBE:LOW value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:REFLevel:STROBE:LOW <NRF>
- SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:REFLevel:STROBE:LOW?

Info

<NRF> specifies the value of the strobe LOW reference level in volts.

SearchSearchItemTriggerADdrmemoryReflevelStrobeMid ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:REFLevel:STROBE:MID command.

Description

This command sets or queries the value of the strobe MID reference level for a DDR Memory analysis search to determine where to place a mark. You can set the value only when AUTOREFLEVEL is Custom. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:REFLevel:STROBE:MID? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:REFLevel:STROBE:MID? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:REFLevel:STROBE:MID value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:REFLevel:STROBE:MID <NRF>
- SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:REFLevel:STROBE:MID?

Info

<NRF> specifies the value of the strobe MID reference level in volts.

SearchSearchItemTriggerADdrmemoryStandard ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:STANdard command.

Description

This command sets or queries the DDR standard for a DDR Memory analysis search to determine where to place a mark. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:STANdard? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:STANdard? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:STANdard value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:STANdard {DDR|DDR2|DDR3|GDDR3|LPDDR|DDR3L|DDR4|LPDDR3}
- SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:STANdard?

Info

<DDR> sets the DDR standard type to DDR.
<DDR2> sets the DDR standard type to DDR2.
<DDR3> sets the DDR standard type to DDR3.
<GDDR3> sets the DDR standard type to GDDR3.
<LPDDR> sets the DDR standard type to LPDDR.
<DDR3L> sets the DDR standard type to DDR3L.
<DDR4> sets the DDR standard type to DDR4.
<LPDDR3> sets the DDR standard type to LPDDR3.

SearchSearchItemTriggerADdrmemoryStrobesource ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:STROBEsource command.

Description

This command sets or queries the strobe source for a DDR Memory analysis search to determine where to place a mark. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:STROBEsource? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:STROBEsource? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:STROBEsource value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:STROBEsource {CH<x>|MATH<x>|REF<x>}
- SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:STROBEsource?

Info

CH<x> specifies the input channel as the search source, where is the channel number.
MATH<x> specifies the math waveform as the search source, where = 1, 2, 3 or 4.
REF<x> specifies the reference waveform as the search source, where = 1, 2, 3 or 4.

SearchSearchItemTriggerAEdge ¶

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:EDGE command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:EDGE? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:EDGE? query and raise an AssertionError if the returned value does not match value.

Properties

.slope: The SEARCH:SEARCH<x>:TRIGger:A:EDGE:SLOpe command tree.
.source: The SEARCH:SEARCH<x>:TRIGger:A:EDGE:SOUrce command.

slope `property` ¶

slope: SearchSearchItemTriggerAEdgeSlope

Return the SEARCH:SEARCH<x>:TRIGger:A:EDGE:SLOpe command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:EDGE:SLOpe? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:EDGE:SLOpe? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.ch: The SEARCH:SEARCH<x>:TRIGger:A:EDGE:SLOpe:CH<x> command.
.math: The SEARCH:SEARCH<x>:TRIGger:A:EDGE:SLOpe:MATH<x> command.
.ref: The SEARCH:SEARCH<x>:TRIGger:A:EDGE:SLOpe:REF<x> command.

source `property` ¶

source: SearchSearchItemTriggerAEdgeSource

Return the SEARCH:SEARCH<x>:TRIGger:A:EDGE:SOUrce command.

Description

This command sets or queries the source waveform for an edge trigger search to determine where to place a mark. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:EDGE:SOUrce? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:EDGE:SOUrce? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:EDGE:SOUrce value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:EDGE:SOUrce {CH<x>|MATH<x>|REF<x>}
- SEARCH:SEARCH<x>:TRIGger:A:EDGE:SOUrce?

Info

CH<x> specifies one input channel as the edge source, where is the channel number.
MATH<x> specifies the math waveform as the search source, where = 1, 2, 3 or 4.
REF<x> specifies the reference waveform as the search source, where = 1, 2, 3 or 4.

SearchSearchItemTriggerAEdgeSlope ¶

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:EDGE:SLOpe command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:EDGE:SLOpe? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:EDGE:SLOpe? query and raise an AssertionError if the returned value does not match value.

Properties

.ch: The SEARCH:SEARCH<x>:TRIGger:A:EDGE:SLOpe:CH<x> command.
.math: The SEARCH:SEARCH<x>:TRIGger:A:EDGE:SLOpe:MATH<x> command.
.ref: The SEARCH:SEARCH<x>:TRIGger:A:EDGE:SLOpe:REF<x> command.

ch `property` ¶

ch: dict[int, SearchSearchItemTriggerAEdgeSlopeChannel]

Return the SEARCH:SEARCH<x>:TRIGger:A:EDGE:SLOpe:CH<x> command.

Description

This command sets or queries the slope for an edge trigger search to determine where to place a mark. is the search number or the channel number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:EDGE:SLOpe:CH<x>? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:EDGE:SLOpe:CH<x>? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:EDGE:SLOpe:CH<x> value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:EDGE:SLOpe:CH<x> {RISe|FALL|EITher}
- SEARCH:SEARCH<x>:TRIGger:A:EDGE:SLOpe:CH<x>?

Info

RISe specifies a rising edge.
FALL specifies a falling edge.
EITher specifies either rising or falling edge.

math `property` ¶

math: dict[int, SearchSearchItemTriggerAEdgeSlopeMathItem]

Return the SEARCH:SEARCH<x>:TRIGger:A:EDGE:SLOpe:MATH<x> command.

Description

This command sets or queries the slope for an edge trigger search to determine where to place a mark. is the search number or the math waveform number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:EDGE:SLOpe:MATH<x>? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:EDGE:SLOpe:MATH<x>? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:EDGE:SLOpe:MATH<x> value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:EDGE:SLOpe:MATH<x> {RISe|FALL|EITher}
- SEARCH:SEARCH<x>:TRIGger:A:EDGE:SLOpe:MATH<x>?

Info

RISe specifies a rising edge.
FALL specifies a falling edge.
EITHER specifies either rising or falling edge.

ref `property` ¶

ref: dict[int, SearchSearchItemTriggerAEdgeSlopeRefItem]

Return the SEARCH:SEARCH<x>:TRIGger:A:EDGE:SLOpe:REF<x> command.

Description

This command sets or queries the slope for an edge trigger search to determine where to place a mark. is the search number or the reference waveform number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:EDGE:SLOpe:REF<x>? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:EDGE:SLOpe:REF<x>? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:EDGE:SLOpe:REF<x> value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:EDGE:SLOpe:REF<x> {RISe|FALL|EITher}
- SEARCH:SEARCH<x>:TRIGger:A:EDGE:SLOpe:REF<x>?

Info

RISe specifies a rising edge.
FALL specifies a falling edge.
EITHER specifies either rising or falling edge.

SearchSearchItemTriggerAEdgeSlopeChannel ¶

Bases: ValidatedChannel, SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:EDGE:SLOpe:CH<x> command.

Description

This command sets or queries the slope for an edge trigger search to determine where to place a mark. is the search number or the channel number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:EDGE:SLOpe:CH<x>? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:EDGE:SLOpe:CH<x>? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:EDGE:SLOpe:CH<x> value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:EDGE:SLOpe:CH<x> {RISe|FALL|EITher}
- SEARCH:SEARCH<x>:TRIGger:A:EDGE:SLOpe:CH<x>?

Info

RISe specifies a rising edge.
FALL specifies a falling edge.
EITher specifies either rising or falling edge.

SearchSearchItemTriggerAEdgeSlopeMathItem ¶

Bases: ValidatedDynamicNumberCmd, SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:EDGE:SLOpe:MATH<x> command.

Description

This command sets or queries the slope for an edge trigger search to determine where to place a mark. is the search number or the math waveform number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:EDGE:SLOpe:MATH<x>? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:EDGE:SLOpe:MATH<x>? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:EDGE:SLOpe:MATH<x> value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:EDGE:SLOpe:MATH<x> {RISe|FALL|EITher}
- SEARCH:SEARCH<x>:TRIGger:A:EDGE:SLOpe:MATH<x>?

Info

RISe specifies a rising edge.
FALL specifies a falling edge.
EITHER specifies either rising or falling edge.

SearchSearchItemTriggerAEdgeSlopeRefItem ¶

Bases: ValidatedDynamicNumberCmd, SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:EDGE:SLOpe:REF<x> command.

Description

This command sets or queries the slope for an edge trigger search to determine where to place a mark. is the search number or the reference waveform number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:EDGE:SLOpe:REF<x>? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:EDGE:SLOpe:REF<x>? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:EDGE:SLOpe:REF<x> value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:EDGE:SLOpe:REF<x> {RISe|FALL|EITher}
- SEARCH:SEARCH<x>:TRIGger:A:EDGE:SLOpe:REF<x>?

Info

RISe specifies a rising edge.
FALL specifies a falling edge.
EITHER specifies either rising or falling edge.

SearchSearchItemTriggerAEdgeSource ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:EDGE:SOUrce command.

Description

This command sets or queries the source waveform for an edge trigger search to determine where to place a mark. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:EDGE:SOUrce? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:EDGE:SOUrce? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:EDGE:SOUrce value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:EDGE:SOUrce {CH<x>|MATH<x>|REF<x>}
- SEARCH:SEARCH<x>:TRIGger:A:EDGE:SOUrce?

Info

CH<x> specifies one input channel as the edge source, where is the channel number.
MATH<x> specifies the math waveform as the search source, where = 1, 2, 3 or 4.
REF<x> specifies the reference waveform as the search source, where = 1, 2, 3 or 4.

SearchSearchItemTriggerAGlitch ¶

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:GLItch command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:GLItch? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:GLItch? query and raise an AssertionError if the returned value does not match value.

Properties

.polarity: The SEARCH:SEARCH<x>:TRIGger:A:GLItch:POLarity command tree.
.trigif: The SEARCH:SEARCH<x>:TRIGger:A:GLItch:TRIGIF command.
.width: The SEARCH:SEARCH<x>:TRIGger:A:GLItch:WIDth command.

polarity `property` ¶

polarity: SearchSearchItemTriggerAGlitchPolarity

Return the SEARCH:SEARCH<x>:TRIGger:A:GLItch:POLarity command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:GLItch:POLarity? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:GLItch:POLarity? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.ch: The SEARCH:SEARCH<x>:TRIGger:A:GLItch:POLarity:CH<x> command.
.math: The SEARCH:SEARCH<x>:TRIGger:A:GLItch:POLarity:MATH<x> command.
.ref: The SEARCH:SEARCH<x>:TRIGger:A:GLItch:POLarity:REF<x> command.

trigif `property` ¶

trigif: SearchSearchItemTriggerAGlitchTrigif

Return the SEARCH:SEARCH<x>:TRIGger:A:GLItch:TRIGIF command.

Description

This command sets or queries the accept or reject state for a glitch trigger search to determine where to place a mark. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:GLItch:TRIGIF? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:GLItch:TRIGIF? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:GLItch:TRIGIF value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:GLItch:TRIGIF {ACCept|REJect}
- SEARCH:SEARCH<x>:TRIGger:A:GLItch:TRIGIF?

Info

ACCept specifies that a glitch occurs.
REJect specifies that a glitch does not occur.

width `property` ¶

width: SearchSearchItemTriggerAGlitchWidth

Return the SEARCH:SEARCH<x>:TRIGger:A:GLItch:WIDth command.

Description

This command sets or queries the glitch width for a glitch trigger search to determine where to place a mark. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:GLItch:WIDth? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:GLItch:WIDth? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:GLItch:WIDth value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:GLItch:WIDth <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:GLItch:WIDth?

Info

<NR3> specifies the glitch width in seconds.

SearchSearchItemTriggerAGlitchPolarity ¶

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:GLItch:POLarity command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:GLItch:POLarity? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:GLItch:POLarity? query and raise an AssertionError if the returned value does not match value.

Properties

.ch: The SEARCH:SEARCH<x>:TRIGger:A:GLItch:POLarity:CH<x> command.
.math: The SEARCH:SEARCH<x>:TRIGger:A:GLItch:POLarity:MATH<x> command.
.ref: The SEARCH:SEARCH<x>:TRIGger:A:GLItch:POLarity:REF<x> command.

ch `property` ¶

ch: dict[int, SearchSearchItemTriggerAGlitchPolarityChannel]

Return the SEARCH:SEARCH<x>:TRIGger:A:GLItch:POLarity:CH<x> command.

Description

This command sets or queries the polarity for a glitch trigger search to determine where to place a mark. is the search number or channel number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:GLItch:POLarity:CH<x>? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:GLItch:POLarity:CH<x>? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:GLItch:POLarity:CH<x> value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:GLItch:POLarity:CH<x> {EITher|NEGAtive|POSITIVe}
- SEARCH:SEARCH<x>:TRIGger:A:GLItch:POLarity:CH<x>?

Info

EITher specifies positive or negative polarity.
NEGAtive specifies a negative polarity.
POSITIVe specifies a positive glitch polarity.

math `property` ¶

math: dict[int, SearchSearchItemTriggerAGlitchPolarityMathItem]

Return the SEARCH:SEARCH<x>:TRIGger:A:GLItch:POLarity:MATH<x> command.

Description

This command sets or queries the polarity for a glitch trigger search to determine where to place a mark. is the search number or math waveform number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:GLItch:POLarity:MATH<x>? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:GLItch:POLarity:MATH<x>? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:GLItch:POLarity:MATH<x> value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:GLItch:POLarity:MATH<x> {EITher|NEGAtive|POSITIVe}
- SEARCH:SEARCH<x>:TRIGger:A:GLItch:POLarity:MATH<x>?

Info

EITher specifies positive or negative polarity.
NEGAtive specifies a negative polarity.
POSITIVe specifies a positive glitch polarity.

ref `property` ¶

ref: dict[int, SearchSearchItemTriggerAGlitchPolarityRefItem]

Return the SEARCH:SEARCH<x>:TRIGger:A:GLItch:POLarity:REF<x> command.

Description

This command sets or queries the polarity for a glitch trigger search to determine where to place a mark. is the search number or reference waveform number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:GLItch:POLarity:REF<x>? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:GLItch:POLarity:REF<x>? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:GLItch:POLarity:REF<x> value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:GLItch:POLarity:REF<x> {EITher|NEGAtive|POSITIVe}
- SEARCH:SEARCH<x>:TRIGger:A:GLItch:POLarity:REF<x>?

Info

EITher specifies positive or negative polarity.
NEGAtive specifies a negative polarity.
POSITIVe specifies a positive glitch polarity.

SearchSearchItemTriggerAGlitchPolarityChannel ¶

Bases: ValidatedChannel, SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:GLItch:POLarity:CH<x> command.

Description

This command sets or queries the polarity for a glitch trigger search to determine where to place a mark. is the search number or channel number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:GLItch:POLarity:CH<x>? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:GLItch:POLarity:CH<x>? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:GLItch:POLarity:CH<x> value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:GLItch:POLarity:CH<x> {EITher|NEGAtive|POSITIVe}
- SEARCH:SEARCH<x>:TRIGger:A:GLItch:POLarity:CH<x>?

Info

EITher specifies positive or negative polarity.
NEGAtive specifies a negative polarity.
POSITIVe specifies a positive glitch polarity.

SearchSearchItemTriggerAGlitchPolarityMathItem ¶

Bases: ValidatedDynamicNumberCmd, SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:GLItch:POLarity:MATH<x> command.

Description

This command sets or queries the polarity for a glitch trigger search to determine where to place a mark. is the search number or math waveform number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:GLItch:POLarity:MATH<x>? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:GLItch:POLarity:MATH<x>? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:GLItch:POLarity:MATH<x> value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:GLItch:POLarity:MATH<x> {EITher|NEGAtive|POSITIVe}
- SEARCH:SEARCH<x>:TRIGger:A:GLItch:POLarity:MATH<x>?

Info

EITher specifies positive or negative polarity.
NEGAtive specifies a negative polarity.
POSITIVe specifies a positive glitch polarity.

SearchSearchItemTriggerAGlitchPolarityRefItem ¶

Bases: ValidatedDynamicNumberCmd, SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:GLItch:POLarity:REF<x> command.

Description

This command sets or queries the polarity for a glitch trigger search to determine where to place a mark. is the search number or reference waveform number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:GLItch:POLarity:REF<x>? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:GLItch:POLarity:REF<x>? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:GLItch:POLarity:REF<x> value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:GLItch:POLarity:REF<x> {EITher|NEGAtive|POSITIVe}
- SEARCH:SEARCH<x>:TRIGger:A:GLItch:POLarity:REF<x>?

Info

EITher specifies positive or negative polarity.
NEGAtive specifies a negative polarity.
POSITIVe specifies a positive glitch polarity.

SearchSearchItemTriggerAGlitchTrigif ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:GLItch:TRIGIF command.

Description

This command sets or queries the accept or reject state for a glitch trigger search to determine where to place a mark. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:GLItch:TRIGIF? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:GLItch:TRIGIF? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:GLItch:TRIGIF value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:GLItch:TRIGIF {ACCept|REJect}
- SEARCH:SEARCH<x>:TRIGger:A:GLItch:TRIGIF?

Info

ACCept specifies that a glitch occurs.
REJect specifies that a glitch does not occur.

SearchSearchItemTriggerAGlitchWidth ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:GLItch:WIDth command.

Description

This command sets or queries the glitch width for a glitch trigger search to determine where to place a mark. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:GLItch:WIDth? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:GLItch:WIDth? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:GLItch:WIDth value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:GLItch:WIDth <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:GLItch:WIDth?

Info

<NR3> specifies the glitch width in seconds.

SearchSearchItemTriggerALevel ¶

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:LEVel command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:LEVel? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LEVel? query and raise an AssertionError if the returned value does not match value.

Properties

.ch: The SEARCH:SEARCH<x>:TRIGger:A:LEVel:CH<x> command.
.math: The SEARCH:SEARCH<x>:TRIGger:A:LEVel:MATH<x> command.
.ref: The SEARCH:SEARCH<x>:TRIGger:A:LEVel:REF<x> command.

ch `property` ¶

ch: dict[int, SearchSearchItemTriggerALevelChannel]

Return the SEARCH:SEARCH<x>:TRIGger:A:LEVel:CH<x> command.

Description

This command sets the threshold level to use when searching on an analog waveform. x can be 1 - 4.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:LEVel:CH<x>? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LEVel:CH<x>? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LEVel:CH<x> value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:LEVel:CH<x> {<NR3>|ECL|TTL}
- SEARCH:SEARCH<x>:TRIGger:A:LEVel:CH<x>?

Info

<NR3> is a floating point number that sets the threshold level to search for, in Volts, when searching on channel .
ECL sets the threshold level to a preset ECL high level of -1.3V.
TTL sets the threshold level to a preset TTL high level of 1.4V.

math `property` ¶

math: dict[int, SearchSearchItemTriggerALevelMathItem]

Return the SEARCH:SEARCH<x>:TRIGger:A:LEVel:MATH<x> command.

Description

This command sets or queries the math waveform level for an edge trigger search to determine where to place a mark. is the search number or math waveform number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:LEVel:MATH<x>? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LEVel:MATH<x>? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LEVel:MATH<x> value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:LEVel:MATH<x> {<NR3>|ECL|TTL}
- SEARCH:SEARCH<x>:TRIGger:A:LEVel:MATH<x>?

Info

<NR3> specifies the trigger level in volts.
ECL specifies a -1.3 V trigger level.
TTL specifies a 1.4 V trigger level.

ref `property` ¶

ref: dict[int, SearchSearchItemTriggerALevelRefItem]

Return the SEARCH:SEARCH<x>:TRIGger:A:LEVel:REF<x> command.

Description

This command sets the threshold level to use when searching on a reference waveform.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:LEVel:REF<x>? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LEVel:REF<x>? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LEVel:REF<x> value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:LEVel:REF<x> {<NR3>|ECL|TTL}
- SEARCH:SEARCH<x>:TRIGger:A:LEVel:REF<x>?

Info

<NR3> is a floating point number that sets the threshold level to search for, in Volts, when searching on a reference waveform.
ECL sets the threshold level to a preset ECL high level of -1.3V.
TTL sets the threshold level to a preset TTL high level of 1.4V.

SearchSearchItemTriggerALevelChannel ¶

Bases: ValidatedChannel, SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:LEVel:CH<x> command.

Description

This command sets the threshold level to use when searching on an analog waveform. x can be 1 - 4.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:LEVel:CH<x>? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LEVel:CH<x>? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LEVel:CH<x> value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:LEVel:CH<x> {<NR3>|ECL|TTL}
- SEARCH:SEARCH<x>:TRIGger:A:LEVel:CH<x>?

Info

<NR3> is a floating point number that sets the threshold level to search for, in Volts, when searching on channel .
ECL sets the threshold level to a preset ECL high level of -1.3V.
TTL sets the threshold level to a preset TTL high level of 1.4V.

SearchSearchItemTriggerALevelMathItem ¶

Bases: ValidatedDynamicNumberCmd, SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:LEVel:MATH<x> command.

Description

This command sets or queries the math waveform level for an edge trigger search to determine where to place a mark. is the search number or math waveform number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:LEVel:MATH<x>? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LEVel:MATH<x>? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LEVel:MATH<x> value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:LEVel:MATH<x> {<NR3>|ECL|TTL}
- SEARCH:SEARCH<x>:TRIGger:A:LEVel:MATH<x>?

Info

<NR3> specifies the trigger level in volts.
ECL specifies a -1.3 V trigger level.
TTL specifies a 1.4 V trigger level.

SearchSearchItemTriggerALevelRefItem ¶

Bases: ValidatedDynamicNumberCmd, SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:LEVel:REF<x> command.

Description

This command sets the threshold level to use when searching on a reference waveform.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:LEVel:REF<x>? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LEVel:REF<x>? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LEVel:REF<x> value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:LEVel:REF<x> {<NR3>|ECL|TTL}
- SEARCH:SEARCH<x>:TRIGger:A:LEVel:REF<x>?

Info

<NR3> is a floating point number that sets the threshold level to search for, in Volts, when searching on a reference waveform.
ECL sets the threshold level to a preset ECL high level of -1.3V.
TTL sets the threshold level to a preset TTL high level of 1.4V.

SearchSearchItemTriggerALogic ¶

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:LOGIc command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc? query and raise an AssertionError if the returned value does not match value.

Properties

.function: The SEARCH:SEARCH<x>:TRIGger:A:LOGIc:FUNCtion command.
.input: The SEARCH:SEARCH<x>:TRIGger:A:LOGIc:INPut command tree.
.threshold: The SEARCH:SEARCH<x>:TRIGger:A:LOGIc:THReshold command tree.

function `property` ¶

function: SearchSearchItemTriggerALogicFunction

Return the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:FUNCtion command.

Description

This command sets or queries the logic operator for a pattern or state trigger search to determine where to place a mark. The search number is specified by x.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:FUNCtion? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:FUNCtion? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:FUNCtion value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:FUNCtion {AND|NANd|NOR|OR}
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:FUNCtion?

Info

AND places a mark if all conditions are true.
NANd places a mark if any of the conditions are false.
NOR places a mark if all conditions are false.
OR places a mark if any of the conditions are true.

input `property` ¶

input: SearchSearchItemTriggerALogicInput

Return the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:INPut command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:INPut? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:INPut? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.ch: The SEARCH:SEARCH<x>:TRIGger:A:LOGIc:INPut:CH<x> command.
.math: The SEARCH:SEARCH<x>:TRIGger:A:LOGIc:INPut:MATH<x> command.
.ref: The SEARCH:SEARCH<x>:TRIGger:A:LOGIc:INPut:REF<x> command.

threshold `property` ¶

threshold: SearchSearchItemTriggerALogicThreshold

Return the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:THReshold command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:THReshold? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:THReshold? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.ch: The SEARCH:SEARCH<x>:TRIGger:A:LOGIc:THReshold:CH<x> command.
.math: The SEARCH:SEARCH<x>:TRIGger:A:LOGIc:THReshold:MATH<x> command.
.ref: The SEARCH:SEARCH<x>:TRIGger:A:LOGIc:THReshold:REF<x> command.

SearchSearchItemTriggerALogicFunction ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:LOGIc:FUNCtion command.

Description

This command sets or queries the logic operator for a pattern or state trigger search to determine where to place a mark. The search number is specified by x.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:FUNCtion? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:FUNCtion? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:FUNCtion value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:FUNCtion {AND|NANd|NOR|OR}
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:FUNCtion?

Info

AND places a mark if all conditions are true.
NANd places a mark if any of the conditions are false.
NOR places a mark if all conditions are false.
OR places a mark if any of the conditions are true.

SearchSearchItemTriggerALogicInput ¶

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:LOGIc:INPut command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:INPut? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:INPut? query and raise an AssertionError if the returned value does not match value.

Properties

.ch: The SEARCH:SEARCH<x>:TRIGger:A:LOGIc:INPut:CH<x> command.
.math: The SEARCH:SEARCH<x>:TRIGger:A:LOGIc:INPut:MATH<x> command.
.ref: The SEARCH:SEARCH<x>:TRIGger:A:LOGIc:INPut:REF<x> command.

ch `property` ¶

ch: dict[int, SearchSearchItemTriggerALogicInputChannel]

Return the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:INPut:CH<x> command.

Description

This command specifies the logic condition to be used in a logic search when the input is an analog channel. SEARCH is the search number, which is always 1, and CH is the channel number, which can be 1-4.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:INPut:CH<x>? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:INPut:CH<x>? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:INPut:CH<x> value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:INPut:CH<x> {HIGH|LOW|X}
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:INPut:CH<x>?

Info

HIGH specifies the logic high.
LOW specifies the logic low.
X specifies a ‘don’t care’ state.

math `property` ¶

math: dict[int, SearchSearchItemTriggerALogicInputMathItem]

Return the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:INPut:MATH<x> command.

Description

This command sets or queries the Boolean logic criteria for a pattern or state trigger search to determine where to place a mark. is the search number or the math waveform number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:INPut:MATH<x>? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:INPut:MATH<x>? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:INPut:MATH<x> value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:INPut:MATH<x> {HIGH|LOW|X}
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:INPut:MATH<x>?

Info

HIGH specifies a high logic level.
LOW specifies a low logic level.
X specifies a ‘don’t care’ condition.

ref `property` ¶

ref: dict[int, SearchSearchItemTriggerALogicInputRefItem]

Return the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:INPut:REF<x> command.

Description

This command specifies the logic condition of the reference waveform to be used in a logic search. SEARCH is the search number, which is always 1, and REF is the reference channel number, which can be 1-4.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:INPut:REF<x>? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:INPut:REF<x>? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:INPut:REF<x> value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:INPut:REF<x> {HIGH|LOW|X}
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:INPut:REF<x>?

Info

HIGH specifies a high logic level.
LOW specifies a low logic level.
X specifies a ‘don’t care’ condition.

SearchSearchItemTriggerALogicInputChannel ¶

Bases: ValidatedChannel, SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:LOGIc:INPut:CH<x> command.

Description

This command specifies the logic condition to be used in a logic search when the input is an analog channel. SEARCH is the search number, which is always 1, and CH is the channel number, which can be 1-4.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:INPut:CH<x>? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:INPut:CH<x>? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:INPut:CH<x> value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:INPut:CH<x> {HIGH|LOW|X}
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:INPut:CH<x>?

Info

HIGH specifies the logic high.
LOW specifies the logic low.
X specifies a ‘don’t care’ state.

SearchSearchItemTriggerALogicInputMathItem ¶

Bases: ValidatedDynamicNumberCmd, SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:LOGIc:INPut:MATH<x> command.

Description

This command sets or queries the Boolean logic criteria for a pattern or state trigger search to determine where to place a mark. is the search number or the math waveform number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:INPut:MATH<x>? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:INPut:MATH<x>? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:INPut:MATH<x> value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:INPut:MATH<x> {HIGH|LOW|X}
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:INPut:MATH<x>?

Info

HIGH specifies a high logic level.
LOW specifies a low logic level.
X specifies a ‘don’t care’ condition.

SearchSearchItemTriggerALogicInputRefItem ¶

Bases: ValidatedDynamicNumberCmd, SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:LOGIc:INPut:REF<x> command.

Description

This command specifies the logic condition of the reference waveform to be used in a logic search. SEARCH is the search number, which is always 1, and REF is the reference channel number, which can be 1-4.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:INPut:REF<x>? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:INPut:REF<x>? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:INPut:REF<x> value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:INPut:REF<x> {HIGH|LOW|X}
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:INPut:REF<x>?

Info

HIGH specifies a high logic level.
LOW specifies a low logic level.
X specifies a ‘don’t care’ condition.

SearchSearchItemTriggerALogicThreshold ¶

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:LOGIc:THReshold command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:THReshold? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:THReshold? query and raise an AssertionError if the returned value does not match value.

Properties

.ch: The SEARCH:SEARCH<x>:TRIGger:A:LOGIc:THReshold:CH<x> command.
.math: The SEARCH:SEARCH<x>:TRIGger:A:LOGIc:THReshold:MATH<x> command.
.ref: The SEARCH:SEARCH<x>:TRIGger:A:LOGIc:THReshold:REF<x> command.

ch `property` ¶

ch: dict[int, SearchSearchItemTriggerALogicThresholdChannel]

Return the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:THReshold:CH<x> command.

Description

This command sets or queries the channel threshold level for a pattern or state trigger search to determine where to place a mark. SEARCH is the search number and CH is the channel number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:THReshold:CH<x>? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:THReshold:CH<x>? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:THReshold:CH<x> value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:THReshold:CH<x> <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:THReshold:CH<x>?

Info

<NR3> specifies the threshold level in volts.

math `property` ¶

math: dict[int, SearchSearchItemTriggerALogicThresholdMathItem]

Return the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:THReshold:MATH<x> command.

Description

This command sets or queries the math waveform threshold level for a pattern or state trigger search to determine where to place a mark. is the search number or channel number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:THReshold:MATH<x>? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:THReshold:MATH<x>? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:THReshold:MATH<x> value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:THReshold:MATH<x> <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:THReshold:MATH<x>?

Info

<NR3> specifies the threshold level in volts.

ref `property` ¶

ref: dict[int, SearchSearchItemTriggerALogicThresholdRefItem]

Return the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:THReshold:REF<x> command.

Description

This command sets or queries the reference waveform threshold level for a pattern or state trigger search to determine where to place a mark. is the search number or the reference waveform number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:THReshold:REF<x>? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:THReshold:REF<x>? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:THReshold:REF<x> value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:THReshold:REF<x> <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:THReshold:REF<x>?

Info

<NR3> specifies the threshold level in volts.

SearchSearchItemTriggerALogicThresholdChannel ¶

Bases: ValidatedChannel, SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:LOGIc:THReshold:CH<x> command.

Description

This command sets or queries the channel threshold level for a pattern or state trigger search to determine where to place a mark. SEARCH is the search number and CH is the channel number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:THReshold:CH<x>? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:THReshold:CH<x>? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:THReshold:CH<x> value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:THReshold:CH<x> <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:THReshold:CH<x>?

Info

<NR3> specifies the threshold level in volts.

SearchSearchItemTriggerALogicThresholdMathItem ¶

Bases: ValidatedDynamicNumberCmd, SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:LOGIc:THReshold:MATH<x> command.

Description

This command sets or queries the math waveform threshold level for a pattern or state trigger search to determine where to place a mark. is the search number or channel number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:THReshold:MATH<x>? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:THReshold:MATH<x>? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:THReshold:MATH<x> value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:THReshold:MATH<x> <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:THReshold:MATH<x>?

Info

<NR3> specifies the threshold level in volts.

SearchSearchItemTriggerALogicThresholdRefItem ¶

Bases: ValidatedDynamicNumberCmd, SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:LOGIc:THReshold:REF<x> command.

Description

This command sets or queries the reference waveform threshold level for a pattern or state trigger search to determine where to place a mark. is the search number or the reference waveform number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:THReshold:REF<x>? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:THReshold:REF<x>? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:LOGIc:THReshold:REF<x> value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:THReshold:REF<x> <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:LOGIc:THReshold:REF<x>?

Info

<NR3> specifies the threshold level in volts.

SearchSearchItemTriggerAPattern ¶

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:PATtern command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:PATtern? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:PATtern? query and raise an AssertionError if the returned value does not match value.

Properties

.when: The SEARCH:SEARCH<x>:TRIGger:A:PATtern:WHEn command.

when `property` ¶

when: SearchSearchItemTriggerAPatternWhen

Return the SEARCH:SEARCH<x>:TRIGger:A:PATtern:WHEn command.

Description

This command sets or queries the pattern trigger pattern test that determines where to place a mark. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:PATtern:WHEn? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:PATtern:WHEn? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:PATtern:WHEn value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:PATtern:WHEn {TRUe|FALSe|LESSThan|MOREThan}
- SEARCH:SEARCH<x>:TRIGger:A:PATtern:WHEn?

Info

TRUe specifies a TRUE logic level.
FALSe specifies a FALSE logic level.
LESSThan specifies the pattern must be TRUE less than the time limit.
MOREThan specifies the pattern must be TRUE more than the time limit.

Sub-properties

.lesslimit: The SEARCH:SEARCH<x>:TRIGger:A:PATtern:WHEn:LESSLimit command.
.morelimit: The SEARCH:SEARCH<x>:TRIGger:A:PATtern:WHEn:MORELimit command.

SearchSearchItemTriggerAPatternWhen ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:PATtern:WHEn command.

Description

This command sets or queries the pattern trigger pattern test that determines where to place a mark. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:PATtern:WHEn? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:PATtern:WHEn? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:PATtern:WHEn value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:PATtern:WHEn {TRUe|FALSe|LESSThan|MOREThan}
- SEARCH:SEARCH<x>:TRIGger:A:PATtern:WHEn?

Info

TRUe specifies a TRUE logic level.
FALSe specifies a FALSE logic level.
LESSThan specifies the pattern must be TRUE less than the time limit.
MOREThan specifies the pattern must be TRUE more than the time limit.

Properties

.lesslimit: The SEARCH:SEARCH<x>:TRIGger:A:PATtern:WHEn:LESSLimit command.
.morelimit: The SEARCH:SEARCH<x>:TRIGger:A:PATtern:WHEn:MORELimit command.

lesslimit `property` ¶

lesslimit: SearchSearchItemTriggerAPatternWhenLesslimit

Return the SEARCH:SEARCH<x>:TRIGger:A:PATtern:WHEn:LESSLimit command.

Description

This command sets or queries the time the pattern trigger lesslimit test uses to determines where to place a mark. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:PATtern:WHEn:LESSLimit? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:PATtern:WHEn:LESSLimit? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:PATtern:WHEn:LESSLimit value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:PATtern:WHEn:LESSLimit <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:PATtern:WHEn:LESSLimit?

Info

<NR3> is the time in seconds.

morelimit `property` ¶

morelimit: SearchSearchItemTriggerAPatternWhenMorelimit

Return the SEARCH:SEARCH<x>:TRIGger:A:PATtern:WHEn:MORELimit command.

Description

This command sets or queries the time the pattern trigger morelimit test uses to determines where to place a mark. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:PATtern:WHEn:MORELimit? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:PATtern:WHEn:MORELimit? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:PATtern:WHEn:MORELimit value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:PATtern:WHEn:MORELimit <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:PATtern:WHEn:MORELimit?

Info

<NR3> is the time in seconds.

SearchSearchItemTriggerAPatternWhenLesslimit ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:PATtern:WHEn:LESSLimit command.

Description

This command sets or queries the time the pattern trigger lesslimit test uses to determines where to place a mark. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:PATtern:WHEn:LESSLimit? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:PATtern:WHEn:LESSLimit? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:PATtern:WHEn:LESSLimit value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:PATtern:WHEn:LESSLimit <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:PATtern:WHEn:LESSLimit?

Info

<NR3> is the time in seconds.

SearchSearchItemTriggerAPatternWhenMorelimit ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:PATtern:WHEn:MORELimit command.

Description

This command sets or queries the time the pattern trigger morelimit test uses to determines where to place a mark. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:PATtern:WHEn:MORELimit? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:PATtern:WHEn:MORELimit? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:PATtern:WHEn:MORELimit value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:PATtern:WHEn:MORELimit <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:PATtern:WHEn:MORELimit?

Info

<NR3> is the time in seconds.

SearchSearchItemTriggerAPulse ¶

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:PULse command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:PULse? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:PULse? query and raise an AssertionError if the returned value does not match value.

Info

CH<x> specifies one input channel as the edge source, where = 1, 2, 3 or 4.

Properties

.source: The SEARCH:SEARCH<x>:TRIGger:A:PULse:SOUrce command.

source `property` ¶

source: SearchSearchItemTriggerAPulseSource

Return the SEARCH:SEARCH<x>:TRIGger:A:PULse:SOUrce command.

Description

This command sets or queries the source waveform for a pulse trigger search to determine where to place a mark. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:PULse:SOUrce? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:PULse:SOUrce? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:PULse:SOUrce value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:PULse:SOUrce {CH<x>|MATH<x>|REF<x>}
- SEARCH:SEARCH<x>:TRIGger:A:PULse:SOUrce?

Info

CH<x> specifies one input channel as the edge source, where = 1, 2, 3 or 4.
MATH<x> specifies the math waveform as the search source, where = 1, 2, 3 or 4.
REF<x> specifies the reference waveform as the search source, where = 1, 2, 3 or 4.

SearchSearchItemTriggerAPulseSource ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:PULse:SOUrce command.

Description

This command sets or queries the source waveform for a pulse trigger search to determine where to place a mark. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:PULse:SOUrce? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:PULse:SOUrce? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:PULse:SOUrce value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:PULse:SOUrce {CH<x>|MATH<x>|REF<x>}
- SEARCH:SEARCH<x>:TRIGger:A:PULse:SOUrce?

Info

CH<x> specifies one input channel as the edge source, where = 1, 2, 3 or 4.
MATH<x> specifies the math waveform as the search source, where = 1, 2, 3 or 4.
REF<x> specifies the reference waveform as the search source, where = 1, 2, 3 or 4.

SearchSearchItemTriggerARunt ¶

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:RUNT command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:RUNT? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:RUNT? query and raise an AssertionError if the returned value does not match value.

Properties

.polarity: The SEARCH:SEARCH<x>:TRIGger:A:RUNT:POLarity command tree.
.threshold: The SEARCH:SEARCH<x>:TRIGger:A:RUNT:THReshold command tree.
.when: The SEARCH:SEARCH<x>:TRIGger:A:RUNT:WHEn command.
.width: The SEARCH:SEARCH<x>:TRIGger:A:RUNT:WIDth command.

polarity `property` ¶

polarity: SearchSearchItemTriggerARuntPolarity

Return the SEARCH:SEARCH<x>:TRIGger:A:RUNT:POLarity command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:RUNT:POLarity? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:RUNT:POLarity? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.ch: The SEARCH:SEARCH<x>:TRIGger:A:RUNT:POLarity:CH<x> command.
.math: The SEARCH:SEARCH<x>:TRIGger:A:RUNT:POLarity:MATH<x> command.
.ref: The SEARCH:SEARCH<x>:TRIGger:A:RUNT:POLarity:REF<x> command.

threshold `property` ¶

threshold: SearchSearchItemTriggerARuntThreshold

Return the SEARCH:SEARCH<x>:TRIGger:A:RUNT:THReshold command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:RUNT:THReshold? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:RUNT:THReshold? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.high: The SEARCH:SEARCH<x>:TRIGger:A:RUNT:THReshold:HIGH command tree.
.low: The SEARCH:SEARCH<x>:TRIGger:A:RUNT:THReshold:LOW command tree.

when `property` ¶

when: SearchSearchItemTriggerARuntWhen

Return the SEARCH:SEARCH<x>:TRIGger:A:RUNT:WHEn command.

Description

This command sets or returns the condition setting for a runt trigger search to determine where to place a mark. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:RUNT:WHEn? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:RUNT:WHEn? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:RUNT:WHEn value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:RUNT:WHEn {OCCurs|WIDERthan}
- SEARCH:SEARCH<x>:TRIGger:A:RUNT:WHEn?

Info

OCCurs argument specifies a trigger event if a runt of any detectable width occurs.
WIDERthan argument sets the oscilloscope to trigger if a runt pulse is detected with width wider than the time set by the SEARCH:SEARCHX:TRIGGER:A:RUNT:WIDTH command.

width `property` ¶

width: SearchSearchItemTriggerARuntWidth

Return the SEARCH:SEARCH<x>:TRIGger:A:RUNT:WIDth command.

Description

This command sets or queries the width setting for a runt trigger search to determine where to place a mark. The search number is specified by x.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:RUNT:WIDth? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:RUNT:WIDth? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:RUNT:WIDth value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:RUNT:WIDth <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:RUNT:WIDth?

Info

<NR3> specifies the minimum width in seconds.

SearchSearchItemTriggerARuntPolarity ¶

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:RUNT:POLarity command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:RUNT:POLarity? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:RUNT:POLarity? query and raise an AssertionError if the returned value does not match value.

Properties

.ch: The SEARCH:SEARCH<x>:TRIGger:A:RUNT:POLarity:CH<x> command.
.math: The SEARCH:SEARCH<x>:TRIGger:A:RUNT:POLarity:MATH<x> command.
.ref: The SEARCH:SEARCH<x>:TRIGger:A:RUNT:POLarity:REF<x> command.

ch `property` ¶

ch: dict[int, SearchSearchItemTriggerARuntPolarityChannel]

Return the SEARCH:SEARCH<x>:TRIGger:A:RUNT:POLarity:CH<x> command.

Description

This command sets or queries the polarity setting for a runt trigger search to determine where to place a mark. is the search number or channel number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:RUNT:POLarity:CH<x>? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:RUNT:POLarity:CH<x>? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:RUNT:POLarity:CH<x> value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:RUNT:POLarity:CH<x> {EITher|NEGAtive|POSITIVe}
- SEARCH:SEARCH<x>:TRIGger:A:RUNT:POLarity:CH<x>?

Info

EITher places a mark on a runt of either polarity.
NEGative places a mark when the falling edge crosses the high threshold and the rising edge recrosses the high threshold without either edge ever crossing the low threshold.
POSitive places a mark when the rising edge crosses the low threshold and the falling edge recrosses the low threshold without either edge ever crossing the high threshold.

math `property` ¶

math: dict[int, SearchSearchItemTriggerARuntPolarityMathItem]

Return the SEARCH:SEARCH<x>:TRIGger:A:RUNT:POLarity:MATH<x> command.

Description

This command sets or queries the polarity setting for a runt trigger search to determine where to place a mark. is the search number or math waveform number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:RUNT:POLarity:MATH<x>? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:RUNT:POLarity:MATH<x>? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:RUNT:POLarity:MATH<x> value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:RUNT:POLarity:MATH<x> {EITher|NEGAtive|POSITIVe}
- SEARCH:SEARCH<x>:TRIGger:A:RUNT:POLarity:MATH<x>?

Info

EITher places a mark on a runt of either polarity.
NEGative places a mark when the falling edge crosses the high threshold and the rising edge recrosses the high threshold without either edge ever crossing the low threshold.
POSitive places a mark when the rising edge crosses the low threshold and the falling edge recrosses the low threshold without either edge ever crossing the high threshold.

ref `property` ¶

ref: dict[int, SearchSearchItemTriggerARuntPolarityRefItem]

Return the SEARCH:SEARCH<x>:TRIGger:A:RUNT:POLarity:REF<x> command.

Description

This command sets or queries the polarity setting for a runt trigger search to determine where to place a mark. is the search number or reference waveform number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:RUNT:POLarity:REF<x>? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:RUNT:POLarity:REF<x>? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:RUNT:POLarity:REF<x> value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:RUNT:POLarity:REF<x> {EITher|NEGAtive|POSITIVe}
- SEARCH:SEARCH<x>:TRIGger:A:RUNT:POLarity:REF<x>?

Info

EITher places a mark on a runt of either polarity.
NEGative places a mark when the falling edge crosses the high threshold and the rising edge recrosses the high threshold without either edge ever crossing the low threshold.
POSitive places a mark when the rising edge crosses the low threshold and the falling edge recrosses the low threshold without either edge ever crossing the high threshold.

SearchSearchItemTriggerARuntPolarityChannel ¶

Bases: ValidatedChannel, SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:RUNT:POLarity:CH<x> command.

Description

This command sets or queries the polarity setting for a runt trigger search to determine where to place a mark. is the search number or channel number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:RUNT:POLarity:CH<x>? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:RUNT:POLarity:CH<x>? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:RUNT:POLarity:CH<x> value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:RUNT:POLarity:CH<x> {EITher|NEGAtive|POSITIVe}
- SEARCH:SEARCH<x>:TRIGger:A:RUNT:POLarity:CH<x>?

Info

EITher places a mark on a runt of either polarity.
NEGative places a mark when the falling edge crosses the high threshold and the rising edge recrosses the high threshold without either edge ever crossing the low threshold.
POSitive places a mark when the rising edge crosses the low threshold and the falling edge recrosses the low threshold without either edge ever crossing the high threshold.

SearchSearchItemTriggerARuntPolarityMathItem ¶

Bases: ValidatedDynamicNumberCmd, SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:RUNT:POLarity:MATH<x> command.

Description

This command sets or queries the polarity setting for a runt trigger search to determine where to place a mark. is the search number or math waveform number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:RUNT:POLarity:MATH<x>? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:RUNT:POLarity:MATH<x>? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:RUNT:POLarity:MATH<x> value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:RUNT:POLarity:MATH<x> {EITher|NEGAtive|POSITIVe}
- SEARCH:SEARCH<x>:TRIGger:A:RUNT:POLarity:MATH<x>?

Info

EITher places a mark on a runt of either polarity.
NEGative places a mark when the falling edge crosses the high threshold and the rising edge recrosses the high threshold without either edge ever crossing the low threshold.
POSitive places a mark when the rising edge crosses the low threshold and the falling edge recrosses the low threshold without either edge ever crossing the high threshold.

SearchSearchItemTriggerARuntPolarityRefItem ¶

Bases: ValidatedDynamicNumberCmd, SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:RUNT:POLarity:REF<x> command.

Description

This command sets or queries the polarity setting for a runt trigger search to determine where to place a mark. is the search number or reference waveform number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:RUNT:POLarity:REF<x>? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:RUNT:POLarity:REF<x>? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:RUNT:POLarity:REF<x> value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:RUNT:POLarity:REF<x> {EITher|NEGAtive|POSITIVe}
- SEARCH:SEARCH<x>:TRIGger:A:RUNT:POLarity:REF<x>?

Info

EITher places a mark on a runt of either polarity.
NEGative places a mark when the falling edge crosses the high threshold and the rising edge recrosses the high threshold without either edge ever crossing the low threshold.
POSitive places a mark when the rising edge crosses the low threshold and the falling edge recrosses the low threshold without either edge ever crossing the high threshold.

SearchSearchItemTriggerARuntThreshold ¶

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:RUNT:THReshold command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:RUNT:THReshold? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:RUNT:THReshold? query and raise an AssertionError if the returned value does not match value.

Properties

.high: The SEARCH:SEARCH<x>:TRIGger:A:RUNT:THReshold:HIGH command tree.
.low: The SEARCH:SEARCH<x>:TRIGger:A:RUNT:THReshold:LOW command tree.

high `property` ¶

high: SearchSearchItemTriggerARuntThresholdHigh

Return the SEARCH:SEARCH<x>:TRIGger:A:RUNT:THReshold:HIGH command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:RUNT:THReshold:HIGH? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:RUNT:THReshold:HIGH? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.ch: The SEARCH:SEARCH<x>:TRIGger:A:RUNT:THReshold:HIGH:CH<x> command.
.math: The SEARCH:SEARCH<x>:TRIGger:A:RUNT:THReshold:HIGH:MATH<x> command.
.ref: The SEARCH:SEARCH<x>:TRIGger:A:RUNT:THReshold:HIGH:REF<x> command.

low `property` ¶

low: SearchSearchItemTriggerARuntThresholdLow

Return the SEARCH:SEARCH<x>:TRIGger:A:RUNT:THReshold:LOW command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:RUNT:THReshold:LOW? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:RUNT:THReshold:LOW? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.ch: The SEARCH:SEARCH<x>:TRIGger:A:RUNT:THReshold:LOW:CH<x> command.
.math: The SEARCH:SEARCH<x>:TRIGger:A:RUNT:THReshold:LOW:MATH<x> command.
.ref: The SEARCH:SEARCH<x>:TRIGger:A:RUNT:THReshold:LOW:REF<x> command.

SearchSearchItemTriggerARuntThresholdHigh ¶

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:RUNT:THReshold:HIGH command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:RUNT:THReshold:HIGH? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:RUNT:THReshold:HIGH? query and raise an AssertionError if the returned value does not match value.

Properties

.ch: The SEARCH:SEARCH<x>:TRIGger:A:RUNT:THReshold:HIGH:CH<x> command.
.math: The SEARCH:SEARCH<x>:TRIGger:A:RUNT:THReshold:HIGH:MATH<x> command.
.ref: The SEARCH:SEARCH<x>:TRIGger:A:RUNT:THReshold:HIGH:REF<x> command.

ch `property` ¶

ch: dict[int, SearchSearchItemTriggerARuntThresholdHighChannel]

Return the SEARCH:SEARCH<x>:TRIGger:A:RUNT:THReshold:HIGH:CH<x> command.

Description

This command sets or queries the channel threshold HIGH level for a runt trigger search to determine where to place a mark. is the search number or the channel number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:RUNT:THReshold:HIGH:CH<x>? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:RUNT:THReshold:HIGH:CH<x>? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:RUNT:THReshold:HIGH:CH<x> value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:RUNT:THReshold:HIGH:CH<x> <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:RUNT:THReshold:HIGH:CH<x>?

Info

<NR3> specifies the HIGH threshold in volts.

math `property` ¶

math: dict[int, SearchSearchItemTriggerARuntThresholdHighMathItem]

Return the SEARCH:SEARCH<x>:TRIGger:A:RUNT:THReshold:HIGH:MATH<x> command.

Description

This command sets or returns the math waveform threshold HIGH level for a runt trigger search to determine where to place a mark. is the search number or the math waveform number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:RUNT:THReshold:HIGH:MATH<x>? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:RUNT:THReshold:HIGH:MATH<x>? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:RUNT:THReshold:HIGH:MATH<x> value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:RUNT:THReshold:HIGH:MATH<x> <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:RUNT:THReshold:HIGH:MATH<x>?

Info

<NR3> specifies the HIGH threshold level.

ref `property` ¶

ref: dict[int, SearchSearchItemTriggerARuntThresholdHighRefItem]

Return the SEARCH:SEARCH<x>:TRIGger:A:RUNT:THReshold:HIGH:REF<x> command.

Description

This command sets or returns the reference waveform threshold HIGH level for a runt trigger search to determine where to place a mark. is the search number or the reference waveform number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:RUNT:THReshold:HIGH:REF<x>? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:RUNT:THReshold:HIGH:REF<x>? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:RUNT:THReshold:HIGH:REF<x> value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:RUNT:THReshold:HIGH:REF<x> <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:RUNT:THReshold:HIGH:REF<x>?

Info

<NR3> specifies the HIGH threshold in volts.

SearchSearchItemTriggerARuntThresholdHighChannel ¶

Bases: ValidatedChannel, SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:RUNT:THReshold:HIGH:CH<x> command.

Description

This command sets or queries the channel threshold HIGH level for a runt trigger search to determine where to place a mark. is the search number or the channel number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:RUNT:THReshold:HIGH:CH<x>? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:RUNT:THReshold:HIGH:CH<x>? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:RUNT:THReshold:HIGH:CH<x> value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:RUNT:THReshold:HIGH:CH<x> <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:RUNT:THReshold:HIGH:CH<x>?

Info

<NR3> specifies the HIGH threshold in volts.

SearchSearchItemTriggerARuntThresholdHighMathItem ¶

Bases: ValidatedDynamicNumberCmd, SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:RUNT:THReshold:HIGH:MATH<x> command.

Description

This command sets or returns the math waveform threshold HIGH level for a runt trigger search to determine where to place a mark. is the search number or the math waveform number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:RUNT:THReshold:HIGH:MATH<x>? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:RUNT:THReshold:HIGH:MATH<x>? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:RUNT:THReshold:HIGH:MATH<x> value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:RUNT:THReshold:HIGH:MATH<x> <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:RUNT:THReshold:HIGH:MATH<x>?

Info

<NR3> specifies the HIGH threshold level.

SearchSearchItemTriggerARuntThresholdHighRefItem ¶

Bases: ValidatedDynamicNumberCmd, SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:RUNT:THReshold:HIGH:REF<x> command.

Description

This command sets or returns the reference waveform threshold HIGH level for a runt trigger search to determine where to place a mark. is the search number or the reference waveform number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:RUNT:THReshold:HIGH:REF<x>? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:RUNT:THReshold:HIGH:REF<x>? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:RUNT:THReshold:HIGH:REF<x> value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:RUNT:THReshold:HIGH:REF<x> <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:RUNT:THReshold:HIGH:REF<x>?

Info

<NR3> specifies the HIGH threshold in volts.

SearchSearchItemTriggerARuntThresholdLow ¶

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:RUNT:THReshold:LOW command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:RUNT:THReshold:LOW? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:RUNT:THReshold:LOW? query and raise an AssertionError if the returned value does not match value.

Properties

.ch: The SEARCH:SEARCH<x>:TRIGger:A:RUNT:THReshold:LOW:CH<x> command.
.math: The SEARCH:SEARCH<x>:TRIGger:A:RUNT:THReshold:LOW:MATH<x> command.
.ref: The SEARCH:SEARCH<x>:TRIGger:A:RUNT:THReshold:LOW:REF<x> command.

ch `property` ¶

ch: dict[int, SearchSearchItemTriggerARuntThresholdLowChannel]

Return the SEARCH:SEARCH<x>:TRIGger:A:RUNT:THReshold:LOW:CH<x> command.

Description

This command sets or queries the channel waveform threshold LOW level for a runt trigger search to determine where to place a mark. is the search number or the channel number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:RUNT:THReshold:LOW:CH<x>? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:RUNT:THReshold:LOW:CH<x>? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:RUNT:THReshold:LOW:CH<x> value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:RUNT:THReshold:LOW:CH<x> <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:RUNT:THReshold:LOW:CH<x>?

Info

<NR3> specifies the LOW threshold in volts.

math `property` ¶

math: dict[int, SearchSearchItemTriggerARuntThresholdLowMathItem]

Return the SEARCH:SEARCH<x>:TRIGger:A:RUNT:THReshold:LOW:MATH<x> command.

Description

This command sets or queries the math waveform threshold LOW level for a runt trigger search to determine where to place a mark. is the search number or the math waveform number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:RUNT:THReshold:LOW:MATH<x>? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:RUNT:THReshold:LOW:MATH<x>? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:RUNT:THReshold:LOW:MATH<x> value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:RUNT:THReshold:LOW:MATH<x> <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:RUNT:THReshold:LOW:MATH<x>?

Info

<NR3> specifies the LOW threshold level.

ref `property` ¶

ref: dict[int, SearchSearchItemTriggerARuntThresholdLowRefItem]

Return the SEARCH:SEARCH<x>:TRIGger:A:RUNT:THReshold:LOW:REF<x> command.

Description

This command sets or returns the reference waveform threshold LOW level for a runt trigger search to determine where to place a mark. is the search number or the reference waveform number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:RUNT:THReshold:LOW:REF<x>? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:RUNT:THReshold:LOW:REF<x>? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:RUNT:THReshold:LOW:REF<x> value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:RUNT:THReshold:LOW:REF<x> <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:RUNT:THReshold:LOW:REF<x>?

Info

<NR3> specifies the LOW threshold in volts.

SearchSearchItemTriggerARuntThresholdLowChannel ¶

Bases: ValidatedChannel, SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:RUNT:THReshold:LOW:CH<x> command.

Description

This command sets or queries the channel waveform threshold LOW level for a runt trigger search to determine where to place a mark. is the search number or the channel number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:RUNT:THReshold:LOW:CH<x>? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:RUNT:THReshold:LOW:CH<x>? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:RUNT:THReshold:LOW:CH<x> value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:RUNT:THReshold:LOW:CH<x> <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:RUNT:THReshold:LOW:CH<x>?

Info

<NR3> specifies the LOW threshold in volts.

SearchSearchItemTriggerARuntThresholdLowMathItem ¶

Bases: ValidatedDynamicNumberCmd, SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:RUNT:THReshold:LOW:MATH<x> command.

Description

This command sets or queries the math waveform threshold LOW level for a runt trigger search to determine where to place a mark. is the search number or the math waveform number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:RUNT:THReshold:LOW:MATH<x>? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:RUNT:THReshold:LOW:MATH<x>? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:RUNT:THReshold:LOW:MATH<x> value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:RUNT:THReshold:LOW:MATH<x> <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:RUNT:THReshold:LOW:MATH<x>?

Info

<NR3> specifies the LOW threshold level.

SearchSearchItemTriggerARuntThresholdLowRefItem ¶

Bases: ValidatedDynamicNumberCmd, SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:RUNT:THReshold:LOW:REF<x> command.

Description

This command sets or returns the reference waveform threshold LOW level for a runt trigger search to determine where to place a mark. is the search number or the reference waveform number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:RUNT:THReshold:LOW:REF<x>? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:RUNT:THReshold:LOW:REF<x>? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:RUNT:THReshold:LOW:REF<x> value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:RUNT:THReshold:LOW:REF<x> <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:RUNT:THReshold:LOW:REF<x>?

Info

<NR3> specifies the LOW threshold in volts.

SearchSearchItemTriggerARuntWhen ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:RUNT:WHEn command.

Description

This command sets or returns the condition setting for a runt trigger search to determine where to place a mark. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:RUNT:WHEn? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:RUNT:WHEn? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:RUNT:WHEn value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:RUNT:WHEn {OCCurs|WIDERthan}
- SEARCH:SEARCH<x>:TRIGger:A:RUNT:WHEn?

Info

OCCurs argument specifies a trigger event if a runt of any detectable width occurs.
WIDERthan argument sets the oscilloscope to trigger if a runt pulse is detected with width wider than the time set by the SEARCH:SEARCHX:TRIGGER:A:RUNT:WIDTH command.

SearchSearchItemTriggerARuntWidth ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:RUNT:WIDth command.

Description

This command sets or queries the width setting for a runt trigger search to determine where to place a mark. The search number is specified by x.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:RUNT:WIDth? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:RUNT:WIDth? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:RUNT:WIDth value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:RUNT:WIDth <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:RUNT:WIDth?

Info

<NR3> specifies the minimum width in seconds.

SearchSearchItemTriggerASethold ¶

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:SETHold command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold? query and raise an AssertionError if the returned value does not match value.

Properties

.clock: The SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk command tree.
.data: The SEARCH:SEARCH<x>:TRIGger:A:SETHold:DATa command tree.
.holdtime: The SEARCH:SEARCH<x>:TRIGger:A:SETHold:HOLDTime command.
.settime: The SEARCH:SEARCH<x>:TRIGger:A:SETHold:SETTime command.

clock `property` ¶

clock: SearchSearchItemTriggerASetholdClock

Return the SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.edge: The SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:EDGE command.
.source: The SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:SOUrce command.
.threshold: The SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:THReshold command tree.

data `property` ¶

data: SearchSearchItemTriggerASetholdData

Return the SEARCH:SEARCH<x>:TRIGger:A:SETHold:DATa command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:DATa? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:DATa? query and raise an AssertionError if the returned value does not match value.

Info

CH<x> specifies an input channel as the search source, where = 1, 2, 3 or 4.

Sub-properties

.source: The SEARCH:SEARCH<x>:TRIGger:A:SETHold:DATa:SOUrce command.
.threshold: The SEARCH:SEARCH<x>:TRIGger:A:SETHold:DATa:THReshold command tree.

holdtime `property` ¶

holdtime: SearchSearchItemTriggerASetholdHoldtime

Return the SEARCH:SEARCH<x>:TRIGger:A:SETHold:HOLDTime command.

Description

This command sets or queries the hold time setting for a setup/hold trigger search to determine where to place a mark. The search number is specified by x.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:HOLDTime? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:HOLDTime? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:HOLDTime value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:SETHold:HOLDTime <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:SETHold:HOLDTime?

Info

<NR3> specifies the hold time setting in seconds. Positive values for hold time occur after the clock edge. Negative values occur before the clock edge.

settime `property` ¶

settime: SearchSearchItemTriggerASetholdSettime

Return the SEARCH:SEARCH<x>:TRIGger:A:SETHold:SETTime command.

Description

This command sets or queries the setup time setting for a setup/hold trigger search to determine where to place a mark. The search number is specified by x.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:SETTime? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:SETTime? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:SETTime value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:SETHold:SETTime <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:SETHold:SETTime?

Info

<NR3> specifies the setup time for setup and hold violation triggering.

SearchSearchItemTriggerASetholdClock ¶

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk? query and raise an AssertionError if the returned value does not match value.

Properties

.edge: The SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:EDGE command.
.source: The SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:SOUrce command.
.threshold: The SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:THReshold command tree.

edge `property` ¶

edge: SearchSearchItemTriggerASetholdClockEdge

Return the SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:EDGE command.

Description

This command sets or queries the clock slope setting for a setup/hold trigger search to determine where to place a mark. The search number is specified by x.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:EDGE? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:EDGE? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:EDGE value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:EDGE {FALL|RISe}
- SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:EDGE?

Info

FALL specifies the polarity as the clock falling edge.
RISe specifies the polarity as the clock rising edge.

source `property` ¶

source: SearchSearchItemTriggerASetholdClockSource

Return the SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:SOUrce command.

Description

This command sets or queries the clock source setting for a setup/hold trigger search to determine where to place a mark. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:SOUrce? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:SOUrce? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:SOUrce value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:SOUrce {CH<x>|MATH<x>|REF<x>}
- SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:SOUrce?

Info

CH<x> specifies an input channel as the edge source, where = 1, 2, 3 or 4.
MATH<x> specifies the math waveform as the search source, where = 1, 2, 3 or 4.
REF<x> specifies the reference waveform as the search source, where = 1, 2, 3 or 4.

threshold `property` ¶

threshold: SearchSearchItemTriggerASetholdClockThreshold

Return the SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:THReshold command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:THReshold? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:THReshold? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.ch: The SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:THReshold:CH<x> command.
.math: The SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:THReshold:MATH<x> command.
.ref: The SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:THReshold:REF<x> command.

SearchSearchItemTriggerASetholdClockEdge ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:EDGE command.

Description

This command sets or queries the clock slope setting for a setup/hold trigger search to determine where to place a mark. The search number is specified by x.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:EDGE? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:EDGE? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:EDGE value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:EDGE {FALL|RISe}
- SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:EDGE?

Info

FALL specifies the polarity as the clock falling edge.
RISe specifies the polarity as the clock rising edge.

SearchSearchItemTriggerASetholdClockSource ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:SOUrce command.

Description

This command sets or queries the clock source setting for a setup/hold trigger search to determine where to place a mark. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:SOUrce? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:SOUrce? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:SOUrce value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:SOUrce {CH<x>|MATH<x>|REF<x>}
- SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:SOUrce?

Info

CH<x> specifies an input channel as the edge source, where = 1, 2, 3 or 4.
MATH<x> specifies the math waveform as the search source, where = 1, 2, 3 or 4.
REF<x> specifies the reference waveform as the search source, where = 1, 2, 3 or 4.

SearchSearchItemTriggerASetholdClockThreshold ¶

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:THReshold command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:THReshold? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:THReshold? query and raise an AssertionError if the returned value does not match value.

Properties

.ch: The SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:THReshold:CH<x> command.
.math: The SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:THReshold:MATH<x> command.
.ref: The SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:THReshold:REF<x> command.

ch `property` ¶

ch: dict[int, SearchSearchItemTriggerASetholdClockThresholdChannel]

Return the SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:THReshold:CH<x> command.

Description

This command sets or queries the clock threshold setting for a setup/hold trigger search to determine where to place a mark. is the search number or channel number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:THReshold:CH<x>? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:THReshold:CH<x>? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:THReshold:CH<x> value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:THReshold:CH<x> {NR3|ECL|TTL}
- SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:THReshold:CH<x>?

Info

<NR3> is the clock level in volts.
ECL specifies a preset ECL high level of -1.3 V.
TTL specifies a preset TTL high level of 1.4 V.

math `property` ¶

math: dict[int, SearchSearchItemTriggerASetholdClockThresholdMathItem]

Return the SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:THReshold:MATH<x> command.

Description

This command sets or queries the clock threshold setting for a setup/hold trigger search to determine where to place a mark. is the search number or math waveform number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:THReshold:MATH<x>? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:THReshold:MATH<x>? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:THReshold:MATH<x> value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:THReshold:MATH<x> {NR3|ECL|TTL}
- SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:THReshold:MATH<x>?

Info

<NR3> is the clock level in volts.
ECL specifies a preset ECL high level of -1.3 V.
TTL specifies a preset TTL high level of 1.4 V.

ref `property` ¶

ref: dict[int, SearchSearchItemTriggerASetholdClockThresholdRefItem]

Return the SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:THReshold:REF<x> command.

Description

This command sets or queries the clock threshold setting for a setup/hold trigger search to determine where to place a mark. is the search number or reference waveform number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:THReshold:REF<x>? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:THReshold:REF<x>? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:THReshold:REF<x> value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:THReshold:REF<x> {NR3|ECL|TTL}
- SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:THReshold:REF<x>?

Info

<NR3> is the clock level in volts.
ECL specifies a preset ECL high level of -1.3 V.
TTL specifies a preset TTL high level of 1.4 V.

SearchSearchItemTriggerASetholdClockThresholdChannel ¶

Bases: ValidatedChannel, SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:THReshold:CH<x> command.

Description

This command sets or queries the clock threshold setting for a setup/hold trigger search to determine where to place a mark. is the search number or channel number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:THReshold:CH<x>? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:THReshold:CH<x>? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:THReshold:CH<x> value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:THReshold:CH<x> {NR3|ECL|TTL}
- SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:THReshold:CH<x>?

Info

<NR3> is the clock level in volts.
ECL specifies a preset ECL high level of -1.3 V.
TTL specifies a preset TTL high level of 1.4 V.

SearchSearchItemTriggerASetholdClockThresholdMathItem ¶

Bases: ValidatedDynamicNumberCmd, SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:THReshold:MATH<x> command.

Description

This command sets or queries the clock threshold setting for a setup/hold trigger search to determine where to place a mark. is the search number or math waveform number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:THReshold:MATH<x>? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:THReshold:MATH<x>? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:THReshold:MATH<x> value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:THReshold:MATH<x> {NR3|ECL|TTL}
- SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:THReshold:MATH<x>?

Info

<NR3> is the clock level in volts.
ECL specifies a preset ECL high level of -1.3 V.
TTL specifies a preset TTL high level of 1.4 V.

SearchSearchItemTriggerASetholdClockThresholdRefItem ¶

Bases: ValidatedDynamicNumberCmd, SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:THReshold:REF<x> command.

Description

This command sets or queries the clock threshold setting for a setup/hold trigger search to determine where to place a mark. is the search number or reference waveform number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:THReshold:REF<x>? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:THReshold:REF<x>? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:THReshold:REF<x> value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:THReshold:REF<x> {NR3|ECL|TTL}
- SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:THReshold:REF<x>?

Info

<NR3> is the clock level in volts.
ECL specifies a preset ECL high level of -1.3 V.
TTL specifies a preset TTL high level of 1.4 V.

SearchSearchItemTriggerASetholdData ¶

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:SETHold:DATa command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:DATa? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:DATa? query and raise an AssertionError if the returned value does not match value.

Info

CH<x> specifies an input channel as the search source, where = 1, 2, 3 or 4.

Properties

.source: The SEARCH:SEARCH<x>:TRIGger:A:SETHold:DATa:SOUrce command.
.threshold: The SEARCH:SEARCH<x>:TRIGger:A:SETHold:DATa:THReshold command tree.

source `property` ¶

source: SearchSearchItemTriggerASetholdDataSource

Return the SEARCH:SEARCH<x>:TRIGger:A:SETHold:DATa:SOUrce command.

Description

This command sets or queries the data source setting for a setup/hold trigger search to determine where to place a mark. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:DATa:SOUrce? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:DATa:SOUrce? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:DATa:SOUrce value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:SETHold:DATa:SOUrce {CH<x>|MATH<x>|REF<x>}
- SEARCH:SEARCH<x>:TRIGger:A:SETHold:DATa:SOUrce?

Info

CH<x> specifies an input channel as the search source, where = 1, 2, 3 or 4.
MATH<x> specifies the math waveform as the search source, where = 1, 2, 3 or 4.
REF<x> specifies the reference waveform as the search source, where = 1, 2, 3 or 4.

threshold `property` ¶

threshold: SearchSearchItemTriggerASetholdDataThreshold

Return the SEARCH:SEARCH<x>:TRIGger:A:SETHold:DATa:THReshold command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:DATa:THReshold? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:DATa:THReshold? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.ch: The SEARCH:SEARCH<x>:TRIGger:A:SETHold:DATa:THReshold:CH<x> command.
.math: The SEARCH:SEARCH<x>:TRIGger:A:SETHold:DATa:THReshold:MATH<x> command.
.ref: The SEARCH:SEARCH<x>:TRIGger:A:SETHold:DATa:THReshold:REF<x> command.

SearchSearchItemTriggerASetholdDataSource ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:SETHold:DATa:SOUrce command.

Description

This command sets or queries the data source setting for a setup/hold trigger search to determine where to place a mark. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:DATa:SOUrce? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:DATa:SOUrce? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:DATa:SOUrce value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:SETHold:DATa:SOUrce {CH<x>|MATH<x>|REF<x>}
- SEARCH:SEARCH<x>:TRIGger:A:SETHold:DATa:SOUrce?

Info

CH<x> specifies an input channel as the search source, where = 1, 2, 3 or 4.
MATH<x> specifies the math waveform as the search source, where = 1, 2, 3 or 4.
REF<x> specifies the reference waveform as the search source, where = 1, 2, 3 or 4.

SearchSearchItemTriggerASetholdDataThreshold ¶

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:SETHold:DATa:THReshold command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:DATa:THReshold? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:DATa:THReshold? query and raise an AssertionError if the returned value does not match value.

Properties

.ch: The SEARCH:SEARCH<x>:TRIGger:A:SETHold:DATa:THReshold:CH<x> command.
.math: The SEARCH:SEARCH<x>:TRIGger:A:SETHold:DATa:THReshold:MATH<x> command.
.ref: The SEARCH:SEARCH<x>:TRIGger:A:SETHold:DATa:THReshold:REF<x> command.

ch `property` ¶

ch: dict[int, SearchSearchItemTriggerASetholdDataThresholdChannel]

Return the SEARCH:SEARCH<x>:TRIGger:A:SETHold:DATa:THReshold:CH<x> command.

Description

This command sets or queries the data threshold setting for a setup/hold trigger search to determine where to place a mark. is the search number or channel number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:DATa:THReshold:CH<x>? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:DATa:THReshold:CH<x>? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:DATa:THReshold:CH<x> value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:SETHold:DATa:THReshold:CH<x> {NR3|ECL|TTL}
- SEARCH:SEARCH<x>:TRIGger:A:SETHold:DATa:THReshold:CH<x>?

Info

<NR3> is the clock level in volts.
ECL specifies a preset ECL high level of -1.3 V.
TTL specifies a preset TTL high level of 1.4 V.

math `property` ¶

math: dict[int, SearchSearchItemTriggerASetholdDataThresholdMathItem]

Return the SEARCH:SEARCH<x>:TRIGger:A:SETHold:DATa:THReshold:MATH<x> command.

Description

This command sets or queries the data threshold setting for a setup/hold trigger search to determine where to place a mark. is the search number or math waveform number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:DATa:THReshold:MATH<x>? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:DATa:THReshold:MATH<x>? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:DATa:THReshold:MATH<x> value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:SETHold:DATa:THReshold:MATH<x> {NR3|ECL|TTL}
- SEARCH:SEARCH<x>:TRIGger:A:SETHold:DATa:THReshold:MATH<x>?

Info

<NR3> is the clock level in volts.
ECL specifies a preset ECL high level of -1.3 V.
TTL specifies a preset TTL high level of 1.4 V.

ref `property` ¶

ref: dict[int, SearchSearchItemTriggerASetholdDataThresholdRefItem]

Return the SEARCH:SEARCH<x>:TRIGger:A:SETHold:DATa:THReshold:REF<x> command.

Description

This command sets or queries the data threshold setting for a setup/hold trigger search to determine where to place a mark. is the search number or reference waveform number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:DATa:THReshold:REF<x>? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:DATa:THReshold:REF<x>? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:DATa:THReshold:REF<x> value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:SETHold:DATa:THReshold:REF<x> {NR3|ECL|TTL}
- SEARCH:SEARCH<x>:TRIGger:A:SETHold:DATa:THReshold:REF<x>?

Info

<NR3> is the clock level in volts.
ECL specifies a preset ECL high level of -1.3 V.
TTL specifies a preset TTL high level of 1.4 V.

SearchSearchItemTriggerASetholdDataThresholdChannel ¶

Bases: ValidatedChannel, SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:SETHold:DATa:THReshold:CH<x> command.

Description

This command sets or queries the data threshold setting for a setup/hold trigger search to determine where to place a mark. is the search number or channel number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:DATa:THReshold:CH<x>? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:DATa:THReshold:CH<x>? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:DATa:THReshold:CH<x> value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:SETHold:DATa:THReshold:CH<x> {NR3|ECL|TTL}
- SEARCH:SEARCH<x>:TRIGger:A:SETHold:DATa:THReshold:CH<x>?

Info

<NR3> is the clock level in volts.
ECL specifies a preset ECL high level of -1.3 V.
TTL specifies a preset TTL high level of 1.4 V.

SearchSearchItemTriggerASetholdDataThresholdMathItem ¶

Bases: ValidatedDynamicNumberCmd, SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:SETHold:DATa:THReshold:MATH<x> command.

Description

This command sets or queries the data threshold setting for a setup/hold trigger search to determine where to place a mark. is the search number or math waveform number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:DATa:THReshold:MATH<x>? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:DATa:THReshold:MATH<x>? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:DATa:THReshold:MATH<x> value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:SETHold:DATa:THReshold:MATH<x> {NR3|ECL|TTL}
- SEARCH:SEARCH<x>:TRIGger:A:SETHold:DATa:THReshold:MATH<x>?

Info

<NR3> is the clock level in volts.
ECL specifies a preset ECL high level of -1.3 V.
TTL specifies a preset TTL high level of 1.4 V.

SearchSearchItemTriggerASetholdDataThresholdRefItem ¶

Bases: ValidatedDynamicNumberCmd, SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:SETHold:DATa:THReshold:REF<x> command.

Description

This command sets or queries the data threshold setting for a setup/hold trigger search to determine where to place a mark. is the search number or reference waveform number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:DATa:THReshold:REF<x>? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:DATa:THReshold:REF<x>? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:DATa:THReshold:REF<x> value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:SETHold:DATa:THReshold:REF<x> {NR3|ECL|TTL}
- SEARCH:SEARCH<x>:TRIGger:A:SETHold:DATa:THReshold:REF<x>?

Info

<NR3> is the clock level in volts.
ECL specifies a preset ECL high level of -1.3 V.
TTL specifies a preset TTL high level of 1.4 V.

SearchSearchItemTriggerASetholdHoldtime ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:SETHold:HOLDTime command.

Description

This command sets or queries the hold time setting for a setup/hold trigger search to determine where to place a mark. The search number is specified by x.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:HOLDTime? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:HOLDTime? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:HOLDTime value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:SETHold:HOLDTime <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:SETHold:HOLDTime?

Info

<NR3> specifies the hold time setting in seconds. Positive values for hold time occur after the clock edge. Negative values occur before the clock edge.

SearchSearchItemTriggerASetholdSettime ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:SETHold:SETTime command.

Description

This command sets or queries the setup time setting for a setup/hold trigger search to determine where to place a mark. The search number is specified by x.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:SETTime? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:SETTime? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:SETHold:SETTime value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:SETHold:SETTime <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:SETHold:SETTime?

Info

<NR3> specifies the setup time for setup and hold violation triggering.

SearchSearchItemTriggerAState ¶

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:STATE command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:STATE? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:STATE? query and raise an AssertionError if the returned value does not match value.

Properties

.clock: The SEARCH:SEARCH<x>:TRIGger:A:STATE:CLOCk command tree.
.when: The SEARCH:SEARCH<x>:TRIGger:A:STATE:WHEn command.

clock `property` ¶

clock: SearchSearchItemTriggerAStateClock

Return the SEARCH:SEARCH<x>:TRIGger:A:STATE:CLOCk command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:STATE:CLOCk? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:STATE:CLOCk? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.edge: The SEARCH:SEARCH<x>:TRIGger:A:STATE:CLOCk:EDGE command.
.source: The SEARCH:SEARCH<x>:TRIGger:A:STATE:CLOCk:SOUrce command.

when `property` ¶

when: SearchSearchItemTriggerAStateWhen

Return the SEARCH:SEARCH<x>:TRIGger:A:STATE:WHEn command.

Description

This command sets or queries the state trigger search to determine where to place a mark. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:STATE:WHEn? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:STATE:WHEn? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:STATE:WHEn value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:STATE:WHEn {TRUe|FALSe}
- SEARCH:SEARCH<x>:TRIGger:A:STATE:WHEn?

Info

TRUe specifies a TRUE logic level.
FALSe specifies a FALSE logic level.

SearchSearchItemTriggerAStateClock ¶

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:STATE:CLOCk command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:STATE:CLOCk? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:STATE:CLOCk? query and raise an AssertionError if the returned value does not match value.

Properties

.edge: The SEARCH:SEARCH<x>:TRIGger:A:STATE:CLOCk:EDGE command.
.source: The SEARCH:SEARCH<x>:TRIGger:A:STATE:CLOCk:SOUrce command.

edge `property` ¶

edge: SearchSearchItemTriggerAStateClockEdge

Return the SEARCH:SEARCH<x>:TRIGger:A:STATE:CLOCk:EDGE command.

Description

This command sets or queries the clock slope setting for a state trigger search to determine where to place a mark. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:STATE:CLOCk:EDGE? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:STATE:CLOCk:EDGE? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:STATE:CLOCk:EDGE value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:STATE:CLOCk:EDGE {FALL|RISe}
- SEARCH:SEARCH<x>:TRIGger:A:STATE:CLOCk:EDGE?

Info

FALL specifies polarity as the clock falling edge.
RISe specifies polarity as the clock rising edge.

source `property` ¶

source: SearchSearchItemTriggerAStateClockSource

Return the SEARCH:SEARCH<x>:TRIGger:A:STATE:CLOCk:SOUrce command.

Description

This command sets or queries the clock source of the twelve waveforms for a state trigger search to determine where to place a mark. is the search number. The hardware trigger is always on the channel 4.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:STATE:CLOCk:SOUrce? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:STATE:CLOCk:SOUrce? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:STATE:CLOCk:SOUrce value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:STATE:CLOCk:SOUrce {CH<x>|MATH<x>|REF<x>}
- SEARCH:SEARCH<x>:TRIGger:A:STATE:CLOCk:SOUrce?

Info

CH<x> specifies an input channel as the search source, where = 1, 2, 3 or 4.
MATH<x> specifies the math waveform as the search source, where = 1, 2, 3 or 4.
REF<x> specifies the reference waveform as the search source, where = 1, 2, 3 or 4.

SearchSearchItemTriggerAStateClockEdge ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:STATE:CLOCk:EDGE command.

Description

This command sets or queries the clock slope setting for a state trigger search to determine where to place a mark. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:STATE:CLOCk:EDGE? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:STATE:CLOCk:EDGE? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:STATE:CLOCk:EDGE value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:STATE:CLOCk:EDGE {FALL|RISe}
- SEARCH:SEARCH<x>:TRIGger:A:STATE:CLOCk:EDGE?

Info

FALL specifies polarity as the clock falling edge.
RISe specifies polarity as the clock rising edge.

SearchSearchItemTriggerAStateClockSource ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:STATE:CLOCk:SOUrce command.

Description

This command sets or queries the clock source of the twelve waveforms for a state trigger search to determine where to place a mark. is the search number. The hardware trigger is always on the channel 4.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:STATE:CLOCk:SOUrce? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:STATE:CLOCk:SOUrce? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:STATE:CLOCk:SOUrce value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:STATE:CLOCk:SOUrce {CH<x>|MATH<x>|REF<x>}
- SEARCH:SEARCH<x>:TRIGger:A:STATE:CLOCk:SOUrce?

Info

CH<x> specifies an input channel as the search source, where = 1, 2, 3 or 4.
MATH<x> specifies the math waveform as the search source, where = 1, 2, 3 or 4.
REF<x> specifies the reference waveform as the search source, where = 1, 2, 3 or 4.

SearchSearchItemTriggerAStateWhen ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:STATE:WHEn command.

Description

This command sets or queries the state trigger search to determine where to place a mark. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:STATE:WHEn? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:STATE:WHEn? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:STATE:WHEn value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:STATE:WHEn {TRUe|FALSe}
- SEARCH:SEARCH<x>:TRIGger:A:STATE:WHEn?

Info

TRUe specifies a TRUE logic level.
FALSe specifies a FALSE logic level.

SearchSearchItemTriggerATimeout ¶

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:TIMEOut command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:TIMEOut? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:TIMEOut? query and raise an AssertionError if the returned value does not match value.

Properties

.polarity: The SEARCH:SEARCH<x>:TRIGger:A:TIMEOut:POLarity command tree.
.time: The SEARCH:SEARCH<x>:TRIGger:A:TIMEOut:TIMe command.

polarity `property` ¶

polarity: SearchSearchItemTriggerATimeoutPolarity

Return the SEARCH:SEARCH<x>:TRIGger:A:TIMEOut:POLarity command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:TIMEOut:POLarity? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:TIMEOut:POLarity? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.ch: The SEARCH:SEARCH<x>:TRIGger:A:TIMEOut:POLarity:CH<x> command.
.math: The SEARCH:SEARCH<x>:TRIGger:A:TIMEOut:POLarity:MATH<x> command.
.ref: The SEARCH:SEARCH<x>:TRIGger:A:TIMEOut:POLarity:REF<x> command.

time `property` ¶

time: SearchSearchItemTriggerATimeoutTime

Return the SEARCH:SEARCH<x>:TRIGger:A:TIMEOut:TIMe command.

Description

This command sets or queries the time setting for a timeout trigger search to determine where to place a mark. The search number is specified by x.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:TIMEOut:TIMe? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:TIMEOut:TIMe? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:TIMEOut:TIMe value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:TIMEOut:TIMe <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:TIMEOut:TIMe?

Info

<NR3> is the time in seconds.

SearchSearchItemTriggerATimeoutPolarity ¶

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:TIMEOut:POLarity command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:TIMEOut:POLarity? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:TIMEOut:POLarity? query and raise an AssertionError if the returned value does not match value.

Properties

.ch: The SEARCH:SEARCH<x>:TRIGger:A:TIMEOut:POLarity:CH<x> command.
.math: The SEARCH:SEARCH<x>:TRIGger:A:TIMEOut:POLarity:MATH<x> command.
.ref: The SEARCH:SEARCH<x>:TRIGger:A:TIMEOut:POLarity:REF<x> command.

ch `property` ¶

ch: dict[int, SearchSearchItemTriggerATimeoutPolarityChannel]

Return the SEARCH:SEARCH<x>:TRIGger:A:TIMEOut:POLarity:CH<x> command.

Description

This command sets or queries the polarity for a timeout trigger search to determine where to place a mark. is the search number or channel number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:TIMEOut:POLarity:CH<x>? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:TIMEOut:POLarity:CH<x>? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:TIMEOut:POLarity:CH<x> value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:TIMEOut:POLarity:CH<x> {STAYSHigh|STAYSLow|EITher}
- SEARCH:SEARCH<x>:TRIGger:A:TIMEOut:POLarity:CH<x>?

Info

STAYSHigh specifies the polarity stays HIGH.
STAYSLow specifies the polarity stays LOW.
EITher specifies the polarity either stays HIGH or stays LOW.

math `property` ¶

math: dict[int, SearchSearchItemTriggerATimeoutPolarityMathItem]

Return the SEARCH:SEARCH<x>:TRIGger:A:TIMEOut:POLarity:MATH<x> command.

Description

This command sets or queries the polarity for a timeout trigger search to determine where to place a mark. is the search number or math waveform number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:TIMEOut:POLarity:MATH<x>? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:TIMEOut:POLarity:MATH<x>? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:TIMEOut:POLarity:MATH<x> value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:TIMEOut:POLarity:MATH<x> {STAYSHigh|STAYSLow|EITher}
- SEARCH:SEARCH<x>:TRIGger:A:TIMEOut:POLarity:MATH<x>?

Info

STAYSHigh specifies the polarity stays HIGH.
STAYSLow specifies the polarity stays LOW.
EITher specifies the polarity either stays HIGH or stays LOW.

ref `property` ¶

ref: dict[int, SearchSearchItemTriggerATimeoutPolarityRefItem]

Return the SEARCH:SEARCH<x>:TRIGger:A:TIMEOut:POLarity:REF<x> command.

Description

This command sets or queries the polarity for a timeout trigger search to determine where to place a mark. is the search number or reference waveform number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:TIMEOut:POLarity:REF<x>? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:TIMEOut:POLarity:REF<x>? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:TIMEOut:POLarity:REF<x> value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:TIMEOut:POLarity:REF<x> {STAYSHigh|STAYSLow|EITher}
- SEARCH:SEARCH<x>:TRIGger:A:TIMEOut:POLarity:REF<x>?

Info

STAYSHigh specifies the polarity stays HIGH.
STAYSLow specifies the polarity stays LOW.
EITher specifies the polarity either stays HIGH or stays LOW.

SearchSearchItemTriggerATimeoutPolarityChannel ¶

Bases: ValidatedChannel, SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:TIMEOut:POLarity:CH<x> command.

Description

This command sets or queries the polarity for a timeout trigger search to determine where to place a mark. is the search number or channel number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:TIMEOut:POLarity:CH<x>? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:TIMEOut:POLarity:CH<x>? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:TIMEOut:POLarity:CH<x> value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:TIMEOut:POLarity:CH<x> {STAYSHigh|STAYSLow|EITher}
- SEARCH:SEARCH<x>:TRIGger:A:TIMEOut:POLarity:CH<x>?

Info

STAYSHigh specifies the polarity stays HIGH.
STAYSLow specifies the polarity stays LOW.
EITher specifies the polarity either stays HIGH or stays LOW.

SearchSearchItemTriggerATimeoutPolarityMathItem ¶

Bases: ValidatedDynamicNumberCmd, SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:TIMEOut:POLarity:MATH<x> command.

Description

This command sets or queries the polarity for a timeout trigger search to determine where to place a mark. is the search number or math waveform number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:TIMEOut:POLarity:MATH<x>? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:TIMEOut:POLarity:MATH<x>? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:TIMEOut:POLarity:MATH<x> value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:TIMEOut:POLarity:MATH<x> {STAYSHigh|STAYSLow|EITher}
- SEARCH:SEARCH<x>:TRIGger:A:TIMEOut:POLarity:MATH<x>?

Info

STAYSHigh specifies the polarity stays HIGH.
STAYSLow specifies the polarity stays LOW.
EITher specifies the polarity either stays HIGH or stays LOW.

SearchSearchItemTriggerATimeoutPolarityRefItem ¶

Bases: ValidatedDynamicNumberCmd, SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:TIMEOut:POLarity:REF<x> command.

Description

This command sets or queries the polarity for a timeout trigger search to determine where to place a mark. is the search number or reference waveform number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:TIMEOut:POLarity:REF<x>? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:TIMEOut:POLarity:REF<x>? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:TIMEOut:POLarity:REF<x> value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:TIMEOut:POLarity:REF<x> {STAYSHigh|STAYSLow|EITher}
- SEARCH:SEARCH<x>:TRIGger:A:TIMEOut:POLarity:REF<x>?

Info

STAYSHigh specifies the polarity stays HIGH.
STAYSLow specifies the polarity stays LOW.
EITher specifies the polarity either stays HIGH or stays LOW.

SearchSearchItemTriggerATimeoutTime ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:TIMEOut:TIMe command.

Description

This command sets or queries the time setting for a timeout trigger search to determine where to place a mark. The search number is specified by x.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:TIMEOut:TIMe? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:TIMEOut:TIMe? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:TIMEOut:TIMe value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:TIMEOut:TIMe <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:TIMEOut:TIMe?

Info

<NR3> is the time in seconds.

SearchSearchItemTriggerATransition ¶

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:TRANsition command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:TRANsition? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:TRANsition? query and raise an AssertionError if the returned value does not match value.

Properties

.deltatime: The SEARCH:SEARCH<x>:TRIGger:A:TRANsition:DELTATime command.
.polarity: The SEARCH:SEARCH<x>:TRIGger:A:TRANsition:POLarity command tree.
.threshold: The SEARCH:SEARCH<x>:TRIGger:A:TRANsition:THReshold command tree.
.when: The SEARCH:SEARCH<x>:TRIGger:A:TRANsition:WHEn command.

deltatime `property` ¶

deltatime: SearchSearchItemTriggerATransitionDeltatime

Return the SEARCH:SEARCH<x>:TRIGger:A:TRANsition:DELTATime command.

Description

This command sets or queries the transition time setting for a transition trigger search to determine where to place a mark. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:TRANsition:DELTATime? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:TRANsition:DELTATime? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:TRANsition:DELTATime value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:TRANsition:DELTATime <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:TRANsition:DELTATime?

Info

<NR3> specifies the transition time in seconds.

polarity `property` ¶

polarity: SearchSearchItemTriggerATransitionPolarity

Return the SEARCH:SEARCH<x>:TRIGger:A:TRANsition:POLarity command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:TRANsition:POLarity? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:TRANsition:POLarity? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.ch: The SEARCH:SEARCH<x>:TRIGger:A:TRANsition:POLarity:CH<x> command.
.math: The SEARCH:SEARCH<x>:TRIGger:A:TRANsition:POLarity:MATH<x> command.
.ref: The SEARCH:SEARCH<x>:TRIGger:A:TRANsition:POLarity:REF<x> command.

threshold `property` ¶

threshold: SearchSearchItemTriggerATransitionThreshold

Return the SEARCH:SEARCH<x>:TRIGger:A:TRANsition:THReshold command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:TRANsition:THReshold? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:TRANsition:THReshold? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.high: The SEARCH:SEARCH<x>:TRIGger:A:TRANsition:THReshold:HIGH command tree.
.low: The SEARCH:SEARCH<x>:TRIGger:A:TRANsition:THReshold:LOW command tree.

when `property` ¶

when: SearchSearchItemTriggerATransitionWhen

Return the SEARCH:SEARCH<x>:TRIGger:A:TRANsition:WHEn command.

Description

This command sets or queries the condition setting for a transition trigger search to determine where to place a mark. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:TRANsition:WHEn? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:TRANsition:WHEn? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:TRANsition:WHEn value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:TRANsition:WHEn {FASTERthan|SLOWERthan}
- SEARCH:SEARCH<x>:TRIGger:A:TRANsition:WHEn?

Info

FASTERthan sets the trigger to occur when the transitioning signal is faster than the set volts/second rate.
SLOWERthan sets the trigger to occur when the transitioning signal is slower than the set volts/second rate.

SearchSearchItemTriggerATransitionDeltatime ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:TRANsition:DELTATime command.

Description

This command sets or queries the transition time setting for a transition trigger search to determine where to place a mark. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:TRANsition:DELTATime? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:TRANsition:DELTATime? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:TRANsition:DELTATime value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:TRANsition:DELTATime <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:TRANsition:DELTATime?

Info

<NR3> specifies the transition time in seconds.

SearchSearchItemTriggerATransitionPolarity ¶

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:TRANsition:POLarity command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:TRANsition:POLarity? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:TRANsition:POLarity? query and raise an AssertionError if the returned value does not match value.

Properties

.ch: The SEARCH:SEARCH<x>:TRIGger:A:TRANsition:POLarity:CH<x> command.
.math: The SEARCH:SEARCH<x>:TRIGger:A:TRANsition:POLarity:MATH<x> command.
.ref: The SEARCH:SEARCH<x>:TRIGger:A:TRANsition:POLarity:REF<x> command.

ch `property` ¶

ch: dict[int, SearchSearchItemTriggerATransitionPolarityChannel]

Return the SEARCH:SEARCH<x>:TRIGger:A:TRANsition:POLarity:CH<x> command.

Description

This command sets or queries the polarity setting for a transition trigger search to determine where to place a mark. is the search number or channel number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:TRANsition:POLarity:CH<x>? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:TRANsition:POLarity:CH<x>? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:TRANsition:POLarity:CH<x> value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:TRANsition:POLarity:CH<x> {EITher|NEGAtive|POSITIVe}
- SEARCH:SEARCH<x>:TRIGger:A:TRANsition:POLarity:CH<x>?

Info

EITher specifies either positive or negative polarity.
NEGative specifies that a pulse edge must traverse from the upper (most positive) to lower (most negative) level for transition triggering to occur.
POSitive specifies that a pulse edge must traverse from the lower (most negative) to higher (most positive) level for transition triggering to occur.

math `property` ¶

math: dict[int, SearchSearchItemTriggerATransitionPolarityMathItem]

Return the SEARCH:SEARCH<x>:TRIGger:A:TRANsition:POLarity:MATH<x> command.

Description

This command sets or queries the polarity setting for a transition trigger search to determine where to place a mark. is the search number or math waveform number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:TRANsition:POLarity:MATH<x>? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:TRANsition:POLarity:MATH<x>? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:TRANsition:POLarity:MATH<x> value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:TRANsition:POLarity:MATH<x> {EITher|NEGAtive|POSITIVe}
- SEARCH:SEARCH<x>:TRIGger:A:TRANsition:POLarity:MATH<x>?

Info

EITher specifies either positive or negative polarity.
NEGative specifies that a pulse edge must traverse from the upper (most positive) to lower (most negative) level for transition triggering to occur.
POSitive specifies that a pulse edge must traverse from the lower (most negative) to higher (most positive) level for transition triggering to occur.

ref `property` ¶

ref: dict[int, SearchSearchItemTriggerATransitionPolarityRefItem]

Return the SEARCH:SEARCH<x>:TRIGger:A:TRANsition:POLarity:REF<x> command.

Description

This command sets or queries the polarity setting for a transition trigger search to determine where to place a mark. is the search number or reference waveform number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:TRANsition:POLarity:REF<x>? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:TRANsition:POLarity:REF<x>? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:TRANsition:POLarity:REF<x> value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:TRANsition:POLarity:REF<x> {EITher|NEGAtive|POSITIVe}
- SEARCH:SEARCH<x>:TRIGger:A:TRANsition:POLarity:REF<x>?

Info

EITher specifies either positive or negative polarity.
NEGative specifies that a pulse edge must traverse from the upper (most positive) to lower (most negative) level for transition triggering to occur.
POSitive specifies that a pulse edge must traverse from the lower (most negative) to higher (most positive) level for transition triggering to occur.

SearchSearchItemTriggerATransitionPolarityChannel ¶

Bases: ValidatedChannel, SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:TRANsition:POLarity:CH<x> command.

Description

This command sets or queries the polarity setting for a transition trigger search to determine where to place a mark. is the search number or channel number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:TRANsition:POLarity:CH<x>? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:TRANsition:POLarity:CH<x>? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:TRANsition:POLarity:CH<x> value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:TRANsition:POLarity:CH<x> {EITher|NEGAtive|POSITIVe}
- SEARCH:SEARCH<x>:TRIGger:A:TRANsition:POLarity:CH<x>?

Info

EITher specifies either positive or negative polarity.
NEGative specifies that a pulse edge must traverse from the upper (most positive) to lower (most negative) level for transition triggering to occur.
POSitive specifies that a pulse edge must traverse from the lower (most negative) to higher (most positive) level for transition triggering to occur.

SearchSearchItemTriggerATransitionPolarityMathItem ¶

Bases: ValidatedDynamicNumberCmd, SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:TRANsition:POLarity:MATH<x> command.

Description

This command sets or queries the polarity setting for a transition trigger search to determine where to place a mark. is the search number or math waveform number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:TRANsition:POLarity:MATH<x>? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:TRANsition:POLarity:MATH<x>? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:TRANsition:POLarity:MATH<x> value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:TRANsition:POLarity:MATH<x> {EITher|NEGAtive|POSITIVe}
- SEARCH:SEARCH<x>:TRIGger:A:TRANsition:POLarity:MATH<x>?

Info

EITher specifies either positive or negative polarity.
NEGative specifies that a pulse edge must traverse from the upper (most positive) to lower (most negative) level for transition triggering to occur.
POSitive specifies that a pulse edge must traverse from the lower (most negative) to higher (most positive) level for transition triggering to occur.

SearchSearchItemTriggerATransitionPolarityRefItem ¶

Bases: ValidatedDynamicNumberCmd, SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:TRANsition:POLarity:REF<x> command.

Description

This command sets or queries the polarity setting for a transition trigger search to determine where to place a mark. is the search number or reference waveform number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:TRANsition:POLarity:REF<x>? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:TRANsition:POLarity:REF<x>? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:TRANsition:POLarity:REF<x> value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:TRANsition:POLarity:REF<x> {EITher|NEGAtive|POSITIVe}
- SEARCH:SEARCH<x>:TRIGger:A:TRANsition:POLarity:REF<x>?

Info

EITher specifies either positive or negative polarity.
NEGative specifies that a pulse edge must traverse from the upper (most positive) to lower (most negative) level for transition triggering to occur.
POSitive specifies that a pulse edge must traverse from the lower (most negative) to higher (most positive) level for transition triggering to occur.

SearchSearchItemTriggerATransitionThreshold ¶

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:TRANsition:THReshold command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:TRANsition:THReshold? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:TRANsition:THReshold? query and raise an AssertionError if the returned value does not match value.

Properties

.high: The SEARCH:SEARCH<x>:TRIGger:A:TRANsition:THReshold:HIGH command tree.
.low: The SEARCH:SEARCH<x>:TRIGger:A:TRANsition:THReshold:LOW command tree.

high `property` ¶

high: SearchSearchItemTriggerATransitionThresholdHigh

Return the SEARCH:SEARCH<x>:TRIGger:A:TRANsition:THReshold:HIGH command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:TRANsition:THReshold:HIGH? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:TRANsition:THReshold:HIGH? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.ch: The SEARCH:SEARCH<x>:TRIGger:A:TRANsition:THReshold:HIGH:CH<x> command.
.math: The SEARCH:SEARCH<x>:TRIGger:A:TRANsition:THReshold:HIGH:MATH<x> command.
.ref: The SEARCH:SEARCH<x>:TRIGger:A:TRANsition:THReshold:HIGH:REF<x> command.

low `property` ¶

low: SearchSearchItemTriggerATransitionThresholdLow

Return the SEARCH:SEARCH<x>:TRIGger:A:TRANsition:THReshold:LOW command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:TRANsition:THReshold:LOW? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:TRANsition:THReshold:LOW? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.ch: The SEARCH:SEARCH<x>:TRIGger:A:TRANsition:THReshold:LOW:CH<x> command.
.math: The SEARCH:SEARCH<x>:TRIGger:A:TRANsition:THReshold:LOW:MATH<x> command.
.ref: The SEARCH:SEARCH<x>:TRIGger:A:TRANsition:THReshold:LOW:REF<x> command.

SearchSearchItemTriggerATransitionThresholdHigh ¶

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:TRANsition:THReshold:HIGH command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:TRANsition:THReshold:HIGH? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:TRANsition:THReshold:HIGH? query and raise an AssertionError if the returned value does not match value.

Properties

.ch: The SEARCH:SEARCH<x>:TRIGger:A:TRANsition:THReshold:HIGH:CH<x> command.
.math: The SEARCH:SEARCH<x>:TRIGger:A:TRANsition:THReshold:HIGH:MATH<x> command.
.ref: The SEARCH:SEARCH<x>:TRIGger:A:TRANsition:THReshold:HIGH:REF<x> command.

ch `property` ¶

ch: dict[int, SearchSearchItemTriggerATransitionThresholdHighChannel]

Return the SEARCH:SEARCH<x>:TRIGger:A:TRANsition:THReshold:HIGH:CH<x> command.

Description

This command sets or queries the threshold high voltage level setting for a transition trigger search to determine where to place a mark. is the search number or channel number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:TRANsition:THReshold:HIGH:CH<x>? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:TRANsition:THReshold:HIGH:CH<x>? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:TRANsition:THReshold:HIGH:CH<x> value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:TRANsition:THReshold:HIGH:CH<x> <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:TRANsition:THReshold:HIGH:CH<x>?

Info

<NR3> specifies the HIGH threshold in volts.

math `property` ¶

math: dict[int, SearchSearchItemTriggerATransitionThresholdHighMathItem]

Return the SEARCH:SEARCH<x>:TRIGger:A:TRANsition:THReshold:HIGH:MATH<x> command.

Description

This command sets or queries the threshold high voltage level setting for a transition trigger search to determine where to place a mark. is the search number or math waveform number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:TRANsition:THReshold:HIGH:MATH<x>? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:TRANsition:THReshold:HIGH:MATH<x>? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:TRANsition:THReshold:HIGH:MATH<x> value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:TRANsition:THReshold:HIGH:MATH<x> <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:TRANsition:THReshold:HIGH:MATH<x>?

Info

<NR3> specifies the HIGH threshold in volts.

ref `property` ¶

ref: dict[int, SearchSearchItemTriggerATransitionThresholdHighRefItem]

Return the SEARCH:SEARCH<x>:TRIGger:A:TRANsition:THReshold:HIGH:REF<x> command.

Description

This command sets or queries the threshold high voltage level setting for a transition trigger search to determine where to place a mark. is the search number or reference waveform number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:TRANsition:THReshold:HIGH:REF<x>? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:TRANsition:THReshold:HIGH:REF<x>? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:TRANsition:THReshold:HIGH:REF<x> value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:TRANsition:THReshold:HIGH:REF<x> <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:TRANsition:THReshold:HIGH:REF<x>?

Info

<NR3> specifies the HIGH threshold in volts.

SearchSearchItemTriggerATransitionThresholdHighChannel ¶

Bases: ValidatedChannel, SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:TRANsition:THReshold:HIGH:CH<x> command.

Description

This command sets or queries the threshold high voltage level setting for a transition trigger search to determine where to place a mark. is the search number or channel number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:TRANsition:THReshold:HIGH:CH<x>? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:TRANsition:THReshold:HIGH:CH<x>? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:TRANsition:THReshold:HIGH:CH<x> value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:TRANsition:THReshold:HIGH:CH<x> <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:TRANsition:THReshold:HIGH:CH<x>?

Info

<NR3> specifies the HIGH threshold in volts.

SearchSearchItemTriggerATransitionThresholdHighMathItem ¶

Bases: ValidatedDynamicNumberCmd, SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:TRANsition:THReshold:HIGH:MATH<x> command.

Description

This command sets or queries the threshold high voltage level setting for a transition trigger search to determine where to place a mark. is the search number or math waveform number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:TRANsition:THReshold:HIGH:MATH<x>? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:TRANsition:THReshold:HIGH:MATH<x>? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:TRANsition:THReshold:HIGH:MATH<x> value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:TRANsition:THReshold:HIGH:MATH<x> <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:TRANsition:THReshold:HIGH:MATH<x>?

Info

<NR3> specifies the HIGH threshold in volts.

SearchSearchItemTriggerATransitionThresholdHighRefItem ¶

Bases: ValidatedDynamicNumberCmd, SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:TRANsition:THReshold:HIGH:REF<x> command.

Description

This command sets or queries the threshold high voltage level setting for a transition trigger search to determine where to place a mark. is the search number or reference waveform number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:TRANsition:THReshold:HIGH:REF<x>? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:TRANsition:THReshold:HIGH:REF<x>? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:TRANsition:THReshold:HIGH:REF<x> value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:TRANsition:THReshold:HIGH:REF<x> <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:TRANsition:THReshold:HIGH:REF<x>?

Info

<NR3> specifies the HIGH threshold in volts.

SearchSearchItemTriggerATransitionThresholdLow ¶

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:TRANsition:THReshold:LOW command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:TRANsition:THReshold:LOW? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:TRANsition:THReshold:LOW? query and raise an AssertionError if the returned value does not match value.

Properties

.ch: The SEARCH:SEARCH<x>:TRIGger:A:TRANsition:THReshold:LOW:CH<x> command.
.math: The SEARCH:SEARCH<x>:TRIGger:A:TRANsition:THReshold:LOW:MATH<x> command.
.ref: The SEARCH:SEARCH<x>:TRIGger:A:TRANsition:THReshold:LOW:REF<x> command.

ch `property` ¶

ch: dict[int, SearchSearchItemTriggerATransitionThresholdLowChannel]

Return the SEARCH:SEARCH<x>:TRIGger:A:TRANsition:THReshold:LOW:CH<x> command.

Description

This command sets or queries the threshold low voltage level setting for a transition trigger search to determine where to place a mark. is the search number or channel number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:TRANsition:THReshold:LOW:CH<x>? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:TRANsition:THReshold:LOW:CH<x>? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:TRANsition:THReshold:LOW:CH<x> value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:TRANsition:THReshold:LOW:CH<x> <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:TRANsition:THReshold:LOW:CH<x>?

Info

<NR3> specifies the LOW threshold in volts.

math `property` ¶

math: dict[int, SearchSearchItemTriggerATransitionThresholdLowMathItem]

Return the SEARCH:SEARCH<x>:TRIGger:A:TRANsition:THReshold:LOW:MATH<x> command.

Description

This command sets or queries the threshold low voltage level setting for a transition trigger search to determine where to place a mark. is the search number or math waveform number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:TRANsition:THReshold:LOW:MATH<x>? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:TRANsition:THReshold:LOW:MATH<x>? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:TRANsition:THReshold:LOW:MATH<x> value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:TRANsition:THReshold:LOW:MATH<x> <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:TRANsition:THReshold:LOW:MATH<x>?

Info

<NR3> specifies the LOW threshold in volts.

ref `property` ¶

ref: dict[int, SearchSearchItemTriggerATransitionThresholdLowRefItem]

Return the SEARCH:SEARCH<x>:TRIGger:A:TRANsition:THReshold:LOW:REF<x> command.

Description

This command sets or queries the threshold low voltage level setting for a transition trigger search to determine where to place a mark. is the search number or reference waveform number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:TRANsition:THReshold:LOW:REF<x>? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:TRANsition:THReshold:LOW:REF<x>? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:TRANsition:THReshold:LOW:REF<x> value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:TRANsition:THReshold:LOW:REF<x> <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:TRANsition:THReshold:LOW:REF<x>?

Info

<NR3> specifies the LOW threshold in volts.

SearchSearchItemTriggerATransitionThresholdLowChannel ¶

Bases: ValidatedChannel, SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:TRANsition:THReshold:LOW:CH<x> command.

Description

This command sets or queries the threshold low voltage level setting for a transition trigger search to determine where to place a mark. is the search number or channel number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:TRANsition:THReshold:LOW:CH<x>? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:TRANsition:THReshold:LOW:CH<x>? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:TRANsition:THReshold:LOW:CH<x> value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:TRANsition:THReshold:LOW:CH<x> <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:TRANsition:THReshold:LOW:CH<x>?

Info

<NR3> specifies the LOW threshold in volts.

SearchSearchItemTriggerATransitionThresholdLowMathItem ¶

Bases: ValidatedDynamicNumberCmd, SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:TRANsition:THReshold:LOW:MATH<x> command.

Description

This command sets or queries the threshold low voltage level setting for a transition trigger search to determine where to place a mark. is the search number or math waveform number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:TRANsition:THReshold:LOW:MATH<x>? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:TRANsition:THReshold:LOW:MATH<x>? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:TRANsition:THReshold:LOW:MATH<x> value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:TRANsition:THReshold:LOW:MATH<x> <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:TRANsition:THReshold:LOW:MATH<x>?

Info

<NR3> specifies the LOW threshold in volts.

SearchSearchItemTriggerATransitionThresholdLowRefItem ¶

Bases: ValidatedDynamicNumberCmd, SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:TRANsition:THReshold:LOW:REF<x> command.

Description

This command sets or queries the threshold low voltage level setting for a transition trigger search to determine where to place a mark. is the search number or reference waveform number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:TRANsition:THReshold:LOW:REF<x>? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:TRANsition:THReshold:LOW:REF<x>? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:TRANsition:THReshold:LOW:REF<x> value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:TRANsition:THReshold:LOW:REF<x> <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:TRANsition:THReshold:LOW:REF<x>?

Info

<NR3> specifies the LOW threshold in volts.

SearchSearchItemTriggerATransitionWhen ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:TRANsition:WHEn command.

Description

This command sets or queries the condition setting for a transition trigger search to determine where to place a mark. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:TRANsition:WHEn? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:TRANsition:WHEn? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:TRANsition:WHEn value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:TRANsition:WHEn {FASTERthan|SLOWERthan}
- SEARCH:SEARCH<x>:TRIGger:A:TRANsition:WHEn?

Info

FASTERthan sets the trigger to occur when the transitioning signal is faster than the set volts/second rate.
SLOWERthan sets the trigger to occur when the transitioning signal is slower than the set volts/second rate.

SearchSearchItemTriggerAType ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:TYPe command.

Description

This command sets or queries the trigger type setting for a search to determine where to place a mark. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:TYPe? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:TYPe? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:TYPe value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:TYPe {EDGE|RUNT|TRANsition|PATtern|GLItch|SETHold|UNDEFINED|WIDth|TIMEOut|WINdow|STATE|DDRRead|DDRWrite|DDRREADWrite}
- SEARCH:SEARCH<x>:TRIGger:A:TYPe?

Info

EDGE triggers when the source input signal amplitude crosses the specified level in the direction given by the slope.
RUNT triggers when a pulse crosses the first preset voltage threshold but does not cross the second preset threshold before recrossing the first. The thresholds are set with the SEARCH:SEARCH<x>:TRIGger:A:RUNt:HIGH and SEARCH:SEARCH<x>:TRIGger:A:RUNt:LOW THRESHOLD commands.
TRANsition triggers when a pulse crosses both thresholds in the same direction as the specified polarity and the transition time between the two threshold crossings is greater or less than the specified time delta.
PATtern trigger on a functional pattern combination of one to four input signal sources.
GLItch triggers at the trailing edge of the glitch pulse where the signal crosses the trigger level.
SETHold triggers on the data input signal transitions relative to the clock input signal transitions within the setup and hold time violation zone.
UNDEFINED is the default. To perform a search, select a different argument.
WIDth triggers on input signal source pulses that are inside or outside of the given time range.
TIMEOut triggers on an input signal source that stays above, stays below, or stays either above or beow the trigger level for a given time.
WINdow triggers on an input signal source that enters or exits the horizontal band defined by the two trigger levels.
STATE triggers on a functional pattern combination of one to three data sources at the time of the clock transition.
DDRRead triggers at the start and end of the read bus.
DDRWrite triggers at the start and end of the write bus.
DDRREADWrite triggers at the start and end of both the read and write bus.

SearchSearchItemTriggerAWidth ¶

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:WIDth command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:WIDth? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:WIDth? query and raise an AssertionError if the returned value does not match value.

Properties

.highlimit: The SEARCH:SEARCH<x>:TRIGger:A:WIDth:HIGHLimit command.
.lowlimit: The SEARCH:SEARCH<x>:TRIGger:A:WIDth:LOWLimit command.
.polarity: The SEARCH:SEARCH<x>:TRIGger:A:WIDth:POLarity command tree.
.when: The SEARCH:SEARCH<x>:TRIGger:A:WIDth:WHEn command.

highlimit `property` ¶

highlimit: SearchSearchItemTriggerAWidthHighlimit

Return the SEARCH:SEARCH<x>:TRIGger:A:WIDth:HIGHLimit command.

Description

This command sets or queries the upper time limit setting for a width trigger search to determine where to place a mark. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:WIDth:HIGHLimit? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:WIDth:HIGHLimit? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:WIDth:HIGHLimit value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:WIDth:HIGHLimit <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:WIDth:HIGHLimit?

Info

<NR3> specifies the upper time limit in seconds.

lowlimit `property` ¶

lowlimit: SearchSearchItemTriggerAWidthLowlimit

Return the SEARCH:SEARCH<x>:TRIGger:A:WIDth:LOWLimit command.

Description

This command sets or queries the lower time limit setting for a width trigger search to determine where to place a mark. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:WIDth:LOWLimit? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:WIDth:LOWLimit? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:WIDth:LOWLimit value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:WIDth:LOWLimit <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:WIDth:LOWLimit?

Info

<NR3> specifies the lower time limit in seconds.

polarity `property` ¶

polarity: SearchSearchItemTriggerAWidthPolarity

Return the SEARCH:SEARCH<x>:TRIGger:A:WIDth:POLarity command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:WIDth:POLarity? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:WIDth:POLarity? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.ch: The SEARCH:SEARCH<x>:TRIGger:A:WIDth:POLarity:CH<x> command.
.math: The SEARCH:SEARCH<x>:TRIGger:A:WIDth:POLarity:MATH<x> command.
.ref: The SEARCH:SEARCH<x>:TRIGger:A:WIDth:POLarity:REF<x> command.

when `property` ¶

when: SearchSearchItemTriggerAWidthWhen

Return the SEARCH:SEARCH<x>:TRIGger:A:WIDth:WHEn command.

Description

This command sets or queries the width trigger search to determine where to place a mark. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:WIDth:WHEn? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:WIDth:WHEn? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:WIDth:WHEn value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:WIDth:WHEn {OUTside|WIThin}
- SEARCH:SEARCH<x>:TRIGger:A:WIDth:WHEn?

Info

OUTside specifies the outside limits.
WIThin specifies the inside limits.

SearchSearchItemTriggerAWidthHighlimit ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:WIDth:HIGHLimit command.

Description

This command sets or queries the upper time limit setting for a width trigger search to determine where to place a mark. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:WIDth:HIGHLimit? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:WIDth:HIGHLimit? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:WIDth:HIGHLimit value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:WIDth:HIGHLimit <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:WIDth:HIGHLimit?

Info

<NR3> specifies the upper time limit in seconds.

SearchSearchItemTriggerAWidthLowlimit ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:WIDth:LOWLimit command.

Description

This command sets or queries the lower time limit setting for a width trigger search to determine where to place a mark. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:WIDth:LOWLimit? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:WIDth:LOWLimit? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:WIDth:LOWLimit value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:WIDth:LOWLimit <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:WIDth:LOWLimit?

Info

<NR3> specifies the lower time limit in seconds.

SearchSearchItemTriggerAWidthPolarity ¶

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:WIDth:POLarity command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:WIDth:POLarity? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:WIDth:POLarity? query and raise an AssertionError if the returned value does not match value.

Properties

.ch: The SEARCH:SEARCH<x>:TRIGger:A:WIDth:POLarity:CH<x> command.
.math: The SEARCH:SEARCH<x>:TRIGger:A:WIDth:POLarity:MATH<x> command.
.ref: The SEARCH:SEARCH<x>:TRIGger:A:WIDth:POLarity:REF<x> command.

ch `property` ¶

ch: dict[int, SearchSearchItemTriggerAWidthPolarityChannel]

Return the SEARCH:SEARCH<x>:TRIGger:A:WIDth:POLarity:CH<x> command.

Description

This command sets or queries the polarity for a width trigger search to determine where to place a mark. is the search number or channel number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:WIDth:POLarity:CH<x>? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:WIDth:POLarity:CH<x>? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:WIDth:POLarity:CH<x> value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:WIDth:POLarity:CH<x> {NEGAtive|POSITIVe}
- SEARCH:SEARCH<x>:TRIGger:A:WIDth:POLarity:CH<x>?

Info

NEGAtive specifies a negative polarity.
POSITIVe specifies a positive polarity.

math `property` ¶

math: dict[int, SearchSearchItemTriggerAWidthPolarityMathItem]

Return the SEARCH:SEARCH<x>:TRIGger:A:WIDth:POLarity:MATH<x> command.

Description

This command sets or queries the polarity for a width trigger search to determine where to place a mark. is the search number or math waveform number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:WIDth:POLarity:MATH<x>? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:WIDth:POLarity:MATH<x>? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:WIDth:POLarity:MATH<x> value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:WIDth:POLarity:MATH<x> {NEGAtive|POSITIVe}
- SEARCH:SEARCH<x>:TRIGger:A:WIDth:POLarity:MATH<x>?

Info

NEGAtive specifies a negative polarity.
POSITIVe specifies a positive polarity.

ref `property` ¶

ref: dict[int, SearchSearchItemTriggerAWidthPolarityRefItem]

Return the SEARCH:SEARCH<x>:TRIGger:A:WIDth:POLarity:REF<x> command.

Description

This command sets or queries the polarity for a width trigger search to determine where to place a mark. is the search number or reference waveform number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:WIDth:POLarity:REF<x>? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:WIDth:POLarity:REF<x>? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:WIDth:POLarity:REF<x> value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:WIDth:POLarity:REF<x> {NEGAtive|POSITIVe}
- SEARCH:SEARCH<x>:TRIGger:A:WIDth:POLarity:REF<x>?

Info

NEGAtive specifies a negative polarity.
POSITIVe specifies a positive polarity.

SearchSearchItemTriggerAWidthPolarityChannel ¶

Bases: ValidatedChannel, SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:WIDth:POLarity:CH<x> command.

Description

This command sets or queries the polarity for a width trigger search to determine where to place a mark. is the search number or channel number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:WIDth:POLarity:CH<x>? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:WIDth:POLarity:CH<x>? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:WIDth:POLarity:CH<x> value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:WIDth:POLarity:CH<x> {NEGAtive|POSITIVe}
- SEARCH:SEARCH<x>:TRIGger:A:WIDth:POLarity:CH<x>?

Info

NEGAtive specifies a negative polarity.
POSITIVe specifies a positive polarity.

SearchSearchItemTriggerAWidthPolarityMathItem ¶

Bases: ValidatedDynamicNumberCmd, SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:WIDth:POLarity:MATH<x> command.

Description

This command sets or queries the polarity for a width trigger search to determine where to place a mark. is the search number or math waveform number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:WIDth:POLarity:MATH<x>? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:WIDth:POLarity:MATH<x>? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:WIDth:POLarity:MATH<x> value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:WIDth:POLarity:MATH<x> {NEGAtive|POSITIVe}
- SEARCH:SEARCH<x>:TRIGger:A:WIDth:POLarity:MATH<x>?

Info

NEGAtive specifies a negative polarity.
POSITIVe specifies a positive polarity.

SearchSearchItemTriggerAWidthPolarityRefItem ¶

Bases: ValidatedDynamicNumberCmd, SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:WIDth:POLarity:REF<x> command.

Description

This command sets or queries the polarity for a width trigger search to determine where to place a mark. is the search number or reference waveform number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:WIDth:POLarity:REF<x>? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:WIDth:POLarity:REF<x>? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:WIDth:POLarity:REF<x> value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:WIDth:POLarity:REF<x> {NEGAtive|POSITIVe}
- SEARCH:SEARCH<x>:TRIGger:A:WIDth:POLarity:REF<x>?

Info

NEGAtive specifies a negative polarity.
POSITIVe specifies a positive polarity.

SearchSearchItemTriggerAWidthWhen ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:WIDth:WHEn command.

Description

This command sets or queries the width trigger search to determine where to place a mark. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:WIDth:WHEn? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:WIDth:WHEn? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:WIDth:WHEn value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:WIDth:WHEn {OUTside|WIThin}
- SEARCH:SEARCH<x>:TRIGger:A:WIDth:WHEn?

Info

OUTside specifies the outside limits.
WIThin specifies the inside limits.

SearchSearchItemTriggerAWindow ¶

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:WINdow command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:WINdow? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:WINdow? query and raise an AssertionError if the returned value does not match value.

Properties

.event: The SEARCH:SEARCH<x>:TRIGger:A:WINdow:EVENT command.
.threshold: The SEARCH:SEARCH<x>:TRIGger:A:WINdow:THReshold command tree.
.width: The SEARCH:SEARCH<x>:TRIGger:A:WINdow:WIDth command.

event `property` ¶

event: SearchSearchItemTriggerAWindowEvent

Return the SEARCH:SEARCH<x>:TRIGger:A:WINdow:EVENT command.

Description

This command sets or queries the window trigger search to determine where to place a mark. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:WINdow:EVENT? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:WINdow:EVENT? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:WINdow:EVENT value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:WINdow:EVENT {OUTSIDEGreater|INSIDEGreater|ENTERSWindow|EXITSWindow}
- SEARCH:SEARCH<x>:TRIGger:A:WINdow:EVENT?

Info

OUTSIDEGreater specifies a trigger event when the signal leaves the window defined by the threshold levels for the time specified by Width.
INSIDEGreater specifies a trigger event when the signal enters the window defined by the threshold levels for the time specified by Width.
ENTERSWindow specifies a trigger event when the signal enters the window defined by the threshold levels.
EXITSWindow specifies a trigger event when the signal leaves the window defined by the threshold levels.

threshold `property` ¶

threshold: SearchSearchItemTriggerAWindowThreshold

Return the SEARCH:SEARCH<x>:TRIGger:A:WINdow:THReshold command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:WINdow:THReshold? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:WINdow:THReshold? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.high: The SEARCH:SEARCH<x>:TRIGger:A:WINdow:THReshold:HIGH command tree.
.low: The SEARCH:SEARCH<x>:TRIGger:A:WINdow:THReshold:LOW command tree.

width `property` ¶

width: SearchSearchItemTriggerAWindowWidth

Return the SEARCH:SEARCH<x>:TRIGger:A:WINdow:WIDth command.

Description

This command sets or queries the width setting for a window trigger search to determine where to place a mark. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:WINdow:WIDth? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:WINdow:WIDth? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:WINdow:WIDth value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:WINdow:WIDth <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:WINdow:WIDth?

Info

<NR3> specifies the minimum width in seconds.

SearchSearchItemTriggerAWindowEvent ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:WINdow:EVENT command.

Description

This command sets or queries the window trigger search to determine where to place a mark. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:WINdow:EVENT? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:WINdow:EVENT? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:WINdow:EVENT value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:WINdow:EVENT {OUTSIDEGreater|INSIDEGreater|ENTERSWindow|EXITSWindow}
- SEARCH:SEARCH<x>:TRIGger:A:WINdow:EVENT?

Info

OUTSIDEGreater specifies a trigger event when the signal leaves the window defined by the threshold levels for the time specified by Width.
INSIDEGreater specifies a trigger event when the signal enters the window defined by the threshold levels for the time specified by Width.
ENTERSWindow specifies a trigger event when the signal enters the window defined by the threshold levels.
EXITSWindow specifies a trigger event when the signal leaves the window defined by the threshold levels.

SearchSearchItemTriggerAWindowThreshold ¶

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:WINdow:THReshold command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:WINdow:THReshold? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:WINdow:THReshold? query and raise an AssertionError if the returned value does not match value.

Properties

.high: The SEARCH:SEARCH<x>:TRIGger:A:WINdow:THReshold:HIGH command tree.
.low: The SEARCH:SEARCH<x>:TRIGger:A:WINdow:THReshold:LOW command tree.

high `property` ¶

high: SearchSearchItemTriggerAWindowThresholdHigh

Return the SEARCH:SEARCH<x>:TRIGger:A:WINdow:THReshold:HIGH command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:WINdow:THReshold:HIGH? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:WINdow:THReshold:HIGH? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.ch: The SEARCH:SEARCH<x>:TRIGger:A:WINdow:THReshold:HIGH:CH<x> command.
.math: The SEARCH:SEARCH<x>:TRIGger:A:WINdow:THReshold:HIGH:MATH<x> command.
.ref: The SEARCH:SEARCH<x>:TRIGger:A:WINdow:THReshold:HIGH:REF<x> command.

low `property` ¶

low: SearchSearchItemTriggerAWindowThresholdLow

Return the SEARCH:SEARCH<x>:TRIGger:A:WINdow:THReshold:LOW command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:WINdow:THReshold:LOW? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:WINdow:THReshold:LOW? query and raise an AssertionError if the returned value does not match value.

Sub-properties

.ch: The SEARCH:SEARCH<x>:TRIGger:A:WINdow:THReshold:LOW:CH<x> command.
.math: The SEARCH:SEARCH<x>:TRIGger:A:WINdow:THReshold:LOW:MATH<x> command.
.ref: The SEARCH:SEARCH<x>:TRIGger:A:WINdow:THReshold:LOW:REF<x> command.

SearchSearchItemTriggerAWindowThresholdHigh ¶

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:WINdow:THReshold:HIGH command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:WINdow:THReshold:HIGH? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:WINdow:THReshold:HIGH? query and raise an AssertionError if the returned value does not match value.

Properties

.ch: The SEARCH:SEARCH<x>:TRIGger:A:WINdow:THReshold:HIGH:CH<x> command.
.math: The SEARCH:SEARCH<x>:TRIGger:A:WINdow:THReshold:HIGH:MATH<x> command.
.ref: The SEARCH:SEARCH<x>:TRIGger:A:WINdow:THReshold:HIGH:REF<x> command.

ch `property` ¶

ch: dict[int, SearchSearchItemTriggerAWindowThresholdHighChannel]

Return the SEARCH:SEARCH<x>:TRIGger:A:WINdow:THReshold:HIGH:CH<x> command.

Description

This command sets or queries the channel threshold HIGH level for a window trigger search to determine where to place a mark. is the search number or channel number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:WINdow:THReshold:HIGH:CH<x>? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:WINdow:THReshold:HIGH:CH<x>? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:WINdow:THReshold:HIGH:CH<x> value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:WINdow:THReshold:HIGH:CH<x> <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:WINdow:THReshold:HIGH:CH<x>?

Info

<NR3> specifies the HIGH threshold level.

math `property` ¶

math: dict[int, SearchSearchItemTriggerAWindowThresholdHighMathItem]

Return the SEARCH:SEARCH<x>:TRIGger:A:WINdow:THReshold:HIGH:MATH<x> command.

Description

This command sets or queries the math waveform threshold HIGH level for a window trigger search to determine where to place a mark. is the search number or math waveform number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:WINdow:THReshold:HIGH:MATH<x>? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:WINdow:THReshold:HIGH:MATH<x>? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:WINdow:THReshold:HIGH:MATH<x> value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:WINdow:THReshold:HIGH:MATH<x> <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:WINdow:THReshold:HIGH:MATH<x>?

Info

<NR3> specifies the HIGH threshold level.

ref `property` ¶

ref: dict[int, SearchSearchItemTriggerAWindowThresholdHighRefItem]

Return the SEARCH:SEARCH<x>:TRIGger:A:WINdow:THReshold:HIGH:REF<x> command.

Description

This command sets or queries the reference waveform threshold HIGH level for a window trigger search to determine where to place a mark. is the search number or reference waveform number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:WINdow:THReshold:HIGH:REF<x>? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:WINdow:THReshold:HIGH:REF<x>? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:WINdow:THReshold:HIGH:REF<x> value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:WINdow:THReshold:HIGH:REF<x> <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:WINdow:THReshold:HIGH:REF<x>?

Info

<NR3> specifies the HIGH threshold level.

SearchSearchItemTriggerAWindowThresholdHighChannel ¶

Bases: ValidatedChannel, SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:WINdow:THReshold:HIGH:CH<x> command.

Description

This command sets or queries the channel threshold HIGH level for a window trigger search to determine where to place a mark. is the search number or channel number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:WINdow:THReshold:HIGH:CH<x>? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:WINdow:THReshold:HIGH:CH<x>? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:WINdow:THReshold:HIGH:CH<x> value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:WINdow:THReshold:HIGH:CH<x> <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:WINdow:THReshold:HIGH:CH<x>?

Info

<NR3> specifies the HIGH threshold level.

SearchSearchItemTriggerAWindowThresholdHighMathItem ¶

Bases: ValidatedDynamicNumberCmd, SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:WINdow:THReshold:HIGH:MATH<x> command.

Description

This command sets or queries the math waveform threshold HIGH level for a window trigger search to determine where to place a mark. is the search number or math waveform number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:WINdow:THReshold:HIGH:MATH<x>? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:WINdow:THReshold:HIGH:MATH<x>? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:WINdow:THReshold:HIGH:MATH<x> value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:WINdow:THReshold:HIGH:MATH<x> <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:WINdow:THReshold:HIGH:MATH<x>?

Info

<NR3> specifies the HIGH threshold level.

SearchSearchItemTriggerAWindowThresholdHighRefItem ¶

Bases: ValidatedDynamicNumberCmd, SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:WINdow:THReshold:HIGH:REF<x> command.

Description

This command sets or queries the reference waveform threshold HIGH level for a window trigger search to determine where to place a mark. is the search number or reference waveform number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:WINdow:THReshold:HIGH:REF<x>? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:WINdow:THReshold:HIGH:REF<x>? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:WINdow:THReshold:HIGH:REF<x> value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:WINdow:THReshold:HIGH:REF<x> <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:WINdow:THReshold:HIGH:REF<x>?

Info

<NR3> specifies the HIGH threshold level.

SearchSearchItemTriggerAWindowThresholdLow ¶

Bases: SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:WINdow:THReshold:LOW command tree.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:WINdow:THReshold:LOW? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:WINdow:THReshold:LOW? query and raise an AssertionError if the returned value does not match value.

Properties

.ch: The SEARCH:SEARCH<x>:TRIGger:A:WINdow:THReshold:LOW:CH<x> command.
.math: The SEARCH:SEARCH<x>:TRIGger:A:WINdow:THReshold:LOW:MATH<x> command.
.ref: The SEARCH:SEARCH<x>:TRIGger:A:WINdow:THReshold:LOW:REF<x> command.

ch `property` ¶

ch: dict[int, SearchSearchItemTriggerAWindowThresholdLowChannel]

Return the SEARCH:SEARCH<x>:TRIGger:A:WINdow:THReshold:LOW:CH<x> command.

Description

This command sets or queries the channel waveform threshold LOW level for a window trigger search to determine where to place a mark. is the search number or channel waveform number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:WINdow:THReshold:LOW:CH<x>? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:WINdow:THReshold:LOW:CH<x>? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:WINdow:THReshold:LOW:CH<x> value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:WINdow:THReshold:LOW:CH<x> <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:WINdow:THReshold:LOW:CH<x>?

Info

<NR3> specifies the LOW threshold level.

math `property` ¶

math: dict[int, SearchSearchItemTriggerAWindowThresholdLowMathItem]

Return the SEARCH:SEARCH<x>:TRIGger:A:WINdow:THReshold:LOW:MATH<x> command.

Description

This command sets or queries the math waveform threshold LOW level for a window trigger search to determine where to place a mark. is the search number or math waveform number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:WINdow:THReshold:LOW:MATH<x>? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:WINdow:THReshold:LOW:MATH<x>? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:WINdow:THReshold:LOW:MATH<x> value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:WINdow:THReshold:LOW:MATH<x> <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:WINdow:THReshold:LOW:MATH<x>?

Info

<NR3> specifies the LOW threshold level.

ref `property` ¶

ref: dict[int, SearchSearchItemTriggerAWindowThresholdLowRefItem]

Return the SEARCH:SEARCH<x>:TRIGger:A:WINdow:THReshold:LOW:REF<x> command.

Description

This command sets or queries the reference waveform threshold LOW level for a window trigger search to determine where to place a mark. is the search number or reference waveform number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:WINdow:THReshold:LOW:REF<x>? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:WINdow:THReshold:LOW:REF<x>? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:WINdow:THReshold:LOW:REF<x> value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:WINdow:THReshold:LOW:REF<x> <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:WINdow:THReshold:LOW:REF<x>?

Info

<NR3> specifies the LOW threshold level.

SearchSearchItemTriggerAWindowThresholdLowChannel ¶

Bases: ValidatedChannel, SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:WINdow:THReshold:LOW:CH<x> command.

Description

This command sets or queries the channel waveform threshold LOW level for a window trigger search to determine where to place a mark. is the search number or channel waveform number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:WINdow:THReshold:LOW:CH<x>? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:WINdow:THReshold:LOW:CH<x>? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:WINdow:THReshold:LOW:CH<x> value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:WINdow:THReshold:LOW:CH<x> <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:WINdow:THReshold:LOW:CH<x>?

Info

<NR3> specifies the LOW threshold level.

SearchSearchItemTriggerAWindowThresholdLowMathItem ¶

Bases: ValidatedDynamicNumberCmd, SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:WINdow:THReshold:LOW:MATH<x> command.

Description

This command sets or queries the math waveform threshold LOW level for a window trigger search to determine where to place a mark. is the search number or math waveform number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:WINdow:THReshold:LOW:MATH<x>? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:WINdow:THReshold:LOW:MATH<x>? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:WINdow:THReshold:LOW:MATH<x> value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:WINdow:THReshold:LOW:MATH<x> <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:WINdow:THReshold:LOW:MATH<x>?

Info

<NR3> specifies the LOW threshold level.

SearchSearchItemTriggerAWindowThresholdLowRefItem ¶

Bases: ValidatedDynamicNumberCmd, SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:WINdow:THReshold:LOW:REF<x> command.

Description

This command sets or queries the reference waveform threshold LOW level for a window trigger search to determine where to place a mark. is the search number or reference waveform number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:WINdow:THReshold:LOW:REF<x>? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:WINdow:THReshold:LOW:REF<x>? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:WINdow:THReshold:LOW:REF<x> value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:WINdow:THReshold:LOW:REF<x> <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:WINdow:THReshold:LOW:REF<x>?

Info

<NR3> specifies the LOW threshold level.

SearchSearchItemTriggerAWindowWidth ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:SEARCH<x>:TRIGger:A:WINdow:WIDth command.

Description

This command sets or queries the width setting for a window trigger search to determine where to place a mark. is the search number.

Usage

Using the .query() method will send the SEARCH:SEARCH<x>:TRIGger:A:WINdow:WIDth? query.
Using the .verify(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:WINdow:WIDth? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:SEARCH<x>:TRIGger:A:WINdow:WIDth value command.

SCPI Syntax

- SEARCH:SEARCH<x>:TRIGger:A:WINdow:WIDth <NR3>
- SEARCH:SEARCH<x>:TRIGger:A:WINdow:WIDth?

Info

<NR3> specifies the minimum width in seconds.

SearchStop ¶

Bases: SCPICmdWrite, SCPICmdRead

The SEARCH:STOP command.

Description

This command sets or queries the stop of acquisitions when a search finds an event.

Usage

Using the .query() method will send the SEARCH:STOP? query.
Using the .verify(value) method will send the SEARCH:STOP? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the SEARCH:STOP value command.

SCPI Syntax

- SEARCH:STOP {<NR1>|OFF|ON|1|0}
- SEARCH:STOP?

Info

<NR1> any numerical nonzero, stops the acquisition.
OFF continues the acquisition.
ON stops the acquisition.
1 stops the acquisition.
0 continues the acquisition.

search ¶

Search ¶

markallevents property ¶

search property ¶

stop property ¶

SearchMarkallevents ¶

SearchSearchItem ¶

copy property ¶

state property ¶

total property ¶

triger property ¶

trigger property ¶

SearchSearchItemCopy ¶

SearchSearchItemState ¶

SearchSearchItemTotal ¶

SearchSearchItemTriger ¶

a property ¶

SearchSearchItemTrigerA ¶

bus property ¶

SearchSearchItemTrigerABus ¶

pcie property ¶

SearchSearchItemTrigerABusPcie ¶

syncheader property ¶

SearchSearchItemTrigerABusPcieSyncheader ¶

SearchSearchItemTrigger ¶

a property ¶

SearchSearchItemTriggerA ¶

bus property ¶

ddrmemory property ¶

edge property ¶

glitch property ¶

level property ¶

logic property ¶

pattern property ¶

pulse property ¶

runt property ¶

sethold property ¶

state property ¶

timeout property ¶

transition property ¶

type property ¶

width property ¶

window property ¶

SearchSearchItemTriggerABus ¶

can property ¶

ethernet property ¶

flexray property ¶

i2c property ¶

lin property ¶

mil1553b property ¶

mipicsitwo property ¶

mipidsione property ¶

parallel property ¶

pcie property ¶

rs232c property ¶

s64b66b property ¶

s8b10b property ¶

source property ¶

spi property ¶

usb property ¶

SearchSearchItemTriggerABusCan ¶

condition property ¶

data property ¶

frametype property ¶

identifier property ¶

SearchSearchItemTriggerABusCanCondition ¶

SearchSearchItemTriggerABusCanData ¶

format property ¶

qualifier property ¶

size property ¶

value property ¶

SearchSearchItemTriggerABusCanDataFormat ¶

SearchSearchItemTriggerABusCanDataQualifier ¶

SearchSearchItemTriggerABusCanDataSize ¶

SearchSearchItemTriggerABusCanDataValue ¶

SearchSearchItemTriggerABusCanFrametype ¶

SearchSearchItemTriggerABusCanIdentifier ¶

direction property ¶

format property ¶

mode property ¶

markallevents `property` ¶

search `property` ¶

stop `property` ¶

copy `property` ¶

state `property` ¶

total `property` ¶

triger `property` ¶

trigger `property` ¶

a `property` ¶

bus `property` ¶

pcie `property` ¶

syncheader `property` ¶

a `property` ¶

bus `property` ¶

ddrmemory `property` ¶

edge `property` ¶

glitch `property` ¶

level `property` ¶

logic `property` ¶

pattern `property` ¶

pulse `property` ¶

runt `property` ¶

sethold `property` ¶

state `property` ¶

timeout `property` ¶

transition `property` ¶

type `property` ¶

width `property` ¶

window `property` ¶

can `property` ¶

ethernet `property` ¶

flexray `property` ¶

i2c `property` ¶

lin `property` ¶

mil1553b `property` ¶

mipicsitwo `property` ¶

mipidsione `property` ¶

parallel `property` ¶

pcie `property` ¶

rs232c `property` ¶

s64b66b `property` ¶

s8b10b `property` ¶

source `property` ¶

spi `property` ¶

usb `property` ¶

condition `property` ¶

data `property` ¶

frametype `property` ¶

identifier `property` ¶

format `property` ¶

qualifier `property` ¶

size `property` ¶

value `property` ¶

direction `property` ¶

format `property` ¶

mode `property` ¶

value `property` ¶

condition `property` ¶

data `property` ¶

ipheader `property` ¶

mac `property` ¶

qtag `property` ¶

qualifier `property` ¶

tcpheader `property` ¶

format `property` ¶

offset `property` ¶

size `property` ¶

value `property` ¶

protocol `property` ¶

sourceaddr `property` ¶

format `property` ¶

value `property` ¶

value `property` ¶

address `property` ¶

length `property` ¶

type `property` ¶

source `property` ¶

format `property` ¶

value `property` ¶

format `property` ¶