cmdbatch ¶

The cmdbatch commands module.

These commands are used in the following models: DPO5K, DPO5KB, DPO70KC, DPO70KD, DPO70KDX, DPO70KSX, DPO7K, DPO7KC, DSA70KC, DSA70KD, MSO5K, MSO5KB, MSO70KC, MSO70KDX

THIS FILE IS AUTO-GENERATED, IT SHOULD NOT BE MANUALLY MODIFIED.

Please report an issue if one is found.

Commands and Queries

- CMDBatch {<NR1>OFF|ON}
- CMDBatch?

Cmdbatch ¶

Bases: SCPICmdWrite, SCPICmdRead

The CMDBatch command.

Description

This command sets or queries the state of command batching. By batching commands, database transactions can be optimized, increasing command throughput. Also, batching allows for ALL commands in an individual batch to be order independent and accomplish the same result as if the commands were coupled. The Batch state is persistent and will be saved across power cycles, but will not be saved and recalled as part of a setup. In a setup scenario, the factory initial value is enabled.

Usage

Using the .query() method will send the CMDBatch? query.
Using the .verify(value) method will send the CMDBatch? query and raise an AssertionError if the returned value does not match value.
Using the .write(value) method will send the CMDBatch value command.

SCPI Syntax

- CMDBatch {<NR1>OFF|ON}
- CMDBatch?

Info

<NR1> = 0 turns command batching off; any other value turns command batching on.
OFF turns command batching off.
ON turns command batching on.