[python source code]

pictbridge

The pictbridge commands module.

These commands are used in the following models: DPO4K, DPO4KB, MDO3, MDO3K, MDO4K, MDO4KB, MDO4KC, MSO4K, MSO4KB

THIS FILE IS AUTO-GENERATED, IT SHOULD NOT BE MANUALLY MODIFIED.

Please report an issue if one is found.

Commands and Queries 
- PICTBridge:DATEPrint {DEFLT|OFF|ON}
- PICTBridge:DATEPrint?
- PICTBridge:DEFault
- PICTBridge:IDPrint {DEFLT|OFF|ON}
- PICTBridge:IDPrint?
- PICTBridge:IMAGESize {DEFLT|IN2P5BY3P25|L|IN4BY6|L2|IN8BY10|L4|E|CARD|HAGAKIPcard|CM6BY8|CM7BY10|CM9BY13|CM10BY15|CM13BY18|CM15BY21|CM18BY24|A4|LETTER}
- PICTBridge:IMAGESize?
- PICTBridge:PAPERSize DEFLT|L|L2|HAGAKIPCARD|MM54BY86|MM100BY150|IN4BY6|IN8BY10|LETTER|IN11BY17|A0|A1|A2|A3|A4|A5|A6|A7|A8|A9|B0|B1|B2|B3|B4|B5|B6|B7|B8|B9|ROLL89MM|ROLL127MM|ROLL100MM|ROLL210MM}
- PICTBridge:PAPERSize?
- PICTBridge:PAPERType {DEFLT|PLAIN|PHOTO|FASTPHOTO}
- PICTBridge:PAPERType?
- PICTBridge:PRINTQual {DEFLT|NRMAL|FINE|DRAFT}
- PICTBridge:PRINTQual?

Pictbridge

Bases: SCPICmdRead

The PICTBridge command tree.

Usage
  • Using the .query() method will send the PICTBridge? query.
  • Using the .verify(value) method will send the PICTBridge? query and raise an AssertionError if the returned value does not match value.
Properties
  • .dateprint: The PICTBridge:DATEPrint command.
  • .default: The PICTBridge:DEFault command.
  • .idprint: The PICTBridge:IDPrint command.
  • .imagesize: The PICTBridge:IMAGESize command.
  • .papersize: The PICTBridge:PAPERSize command.
  • .papertype: The PICTBridge:PAPERType command.
  • .printqual: The PICTBridge:PRINTQual command.

dateprint property 

dateprint: PictbridgeDateprint

Return the PICTBridge:DATEPrint command.

Description
  • Enables or disables printing the date on the print output
Usage
  • Using the .query() method will send the PICTBridge:DATEPrint? query.
  • Using the .verify(value) method will send the PICTBridge:DATEPrint? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the PICTBridge:DATEPrint value command.
SCPI Syntax 
- PICTBridge:DATEPrint {DEFLT|OFF|ON}
- PICTBridge:DATEPrint?
Info
  • DEFLT is the default setting of the printer.
  • ON enables the date print on the print output.
  • OFF disables the date print on the print output.

default property 

default: PictbridgeDefault

Return the PICTBridge:DEFault command.

Description
  • Sets the arguments for all PictBridge commands to their default values. The default values are same as printer default settings.
Usage
  • Using the .write() method will send the PICTBridge:DEFault command.
SCPI Syntax 
- PICTBridge:DEFault

idprint property 

idprint: PictbridgeIdprint

Return the PICTBridge:IDPrint command.

Description
  • Enables or disables printing the oscilloscope model and serial number on the print output.
Usage
  • Using the .query() method will send the PICTBridge:IDPrint? query.
  • Using the .verify(value) method will send the PICTBridge:IDPrint? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the PICTBridge:IDPrint value command.
SCPI Syntax 
- PICTBridge:IDPrint {DEFLT|OFF|ON}
- PICTBridge:IDPrint?
Info
  • DEFLT is the default setting of the printer.
  • ON enables the oscilloscope model and serial number print on the print output.
  • OFF disables the oscilloscope model and serial number print on the print output.

imagesize property 

imagesize: PictbridgeImagesize

Return the PICTBridge:IMAGESize command.

Description
  • This command specifies the image print size.
Usage
  • Using the .query() method will send the PICTBridge:IMAGESize? query.
  • Using the .verify(value) method will send the PICTBridge:IMAGESize? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the PICTBridge:IMAGESize value command.
SCPI Syntax 
- PICTBridge:IMAGESize {DEFLT|IN2P5BY3P25|L|IN4BY6|L2|IN8BY10|L4|E|CARD|HAGAKIPcard|CM6BY8|CM7BY10|CM9BY13|CM10BY15|CM13BY18|CM15BY21|CM18BY24|A4|LETTER}
- PICTBridge:IMAGESize?
Info
  • DEFLT for a default image print size.
  • IN2P5BY3P25 for a 2_5````*3_25 image print size.
  • L for a 3_5````*5 image print size.
  • IN4BY6 for a 4*6 image print size.
  • L2 for a 5*7 image print size.
  • IN8BY10 for a 8*10 image print size.
  • L4 for a 254 MM*178 MM image print size.
  • E for a 110 MM*74 MM image print size.
  • CARD for a 89 MM*55 MM image print size.
  • HAGAKIPcard for a 100 MM*148 MM image print size.
  • CM6BY8 for a 6 CM*8 CM image print size.
  • CM7BY10 for a 7 CM*10 CM image print size.
  • CM9BY13 for a 9 CM*13 CM image print size.
  • CM10BY15 for a 10 CM*15 CM image print size.
  • CM13BY18 or a 13 CM*18 CM image print size.
  • CM15BY21 for a 15 CM*21 CM image print size.
  • CM18BY24 for a 18 CM*24 CM image print size.
  • A4 for a A4 image print size.
  • LETTER for a Letter image print size.

papersize property 

papersize: PictbridgePapersize

Return the PICTBridge:PAPERSize command.

Description
  • Sets the output print paper size.
Usage
  • Using the .query() method will send the PICTBridge:PAPERSize? query.
  • Using the .verify(value) method will send the PICTBridge:PAPERSize? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the PICTBridge:PAPERSize value command.
SCPI Syntax 
- PICTBridge:PAPERSize DEFLT|L|L2|HAGAKIPCARD|MM54BY86|MM100BY150|IN4BY6|IN8BY10|LETTER|IN11BY17|A0|A1|A2|A3|A4|A5|A6|A7|A8|A9|B0|B1|B2|B3|B4|B5|B6|B7|B8|B9|ROLL89MM|ROLL127MM|ROLL100MM|ROLL210MM}
- PICTBridge:PAPERSize?
Info
  • DEFLT for a default paper size.
  • L for a paper size L.
  • L2 for a paper size 2L.
  • HAGAKIPCARD for a paper size Hagaki.
  • MM54BY86 for a card paper size.
  • MM100BY150 for paper size of 100*150 MM.
  • IN4BY6 for a paper size of 4*6.
  • IN8BY10 for a paper size of 8*10.
  • LETTER for a letter paper size.
  • IN11BY17 for a paper size of 11*17.
  • A0 for a A0 paper size.
  • A1 for a A1 paper size.
  • A2 for a A2 paper size.
  • A3 for a A3 paper size.
  • A4 for a A4 paper size.
  • A5 for a A5 paper size.
  • A6 for a A6 paper size.
  • A7 for a A7 paper size.
  • A8 for a A8 paper size.
  • A9 for a A9 paper size.
  • B0 for a B0 paper size.
  • B1 for a B1 paper size.
  • B2 for a B2 paper size.
  • B3 for a B3 paper size.
  • B4 for a B4 paper size.
  • B5 for a B5 paper size.
  • B6 for a B6 paper size.
  • B7 for a B7 paper size.
  • B8 for a B8 paper size.
  • B9 for a B9 paper size.
  • ROLL89MM for a 89 MM Roll paper size.
  • ROLL127MM for a 127 MM Roll paper size.
  • ROLL100MM for a 100 MM Roll paper size.
  • ROLL210MM for a 210 MM Roll paper size.

papertype property 

papertype: PictbridgePapertype

Return the PICTBridge:PAPERType command.

Description
  • This command specifies the paper type.
Usage
  • Using the .query() method will send the PICTBridge:PAPERType? query.
  • Using the .verify(value) method will send the PICTBridge:PAPERType? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the PICTBridge:PAPERType value command.
SCPI Syntax 
- PICTBridge:PAPERType {DEFLT|PLAIN|PHOTO|FASTPHOTO}
- PICTBridge:PAPERType?
Info
  • DEFLT for a default print paper type.
  • PLAIN for a plain print paper type.
  • PHOTO for a photo print paper type.
  • FASTPHOTO for a fastphoto print paper type.

printqual property 

printqual: PictbridgePrintqual

Return the PICTBridge:PRINTQual command.

Description
  • This command specifies the output print quality.
Usage
  • Using the .query() method will send the PICTBridge:PRINTQual? query.
  • Using the .verify(value) method will send the PICTBridge:PRINTQual? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the PICTBridge:PRINTQual value command.
SCPI Syntax 
- PICTBridge:PRINTQual {DEFLT|NRMAL|FINE|DRAFT}
- PICTBridge:PRINTQual?
Info
  • DEFLT for the default quality print.
  • NRMAL for a normal quality print.
  • FINE for a fine quality print.
  • DRAFT for a draft quality print.

PictbridgeDateprint

Bases: SCPICmdWrite, SCPICmdRead

The PICTBridge:DATEPrint command.

Description
  • Enables or disables printing the date on the print output
Usage
  • Using the .query() method will send the PICTBridge:DATEPrint? query.
  • Using the .verify(value) method will send the PICTBridge:DATEPrint? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the PICTBridge:DATEPrint value command.
SCPI Syntax 
- PICTBridge:DATEPrint {DEFLT|OFF|ON}
- PICTBridge:DATEPrint?
Info
  • DEFLT is the default setting of the printer.
  • ON enables the date print on the print output.
  • OFF disables the date print on the print output.

PictbridgeDefault

Bases: SCPICmdWriteNoArguments

The PICTBridge:DEFault command.

Description
  • Sets the arguments for all PictBridge commands to their default values. The default values are same as printer default settings.
Usage
  • Using the .write() method will send the PICTBridge:DEFault command.
SCPI Syntax 
- PICTBridge:DEFault

PictbridgeIdprint

Bases: SCPICmdWrite, SCPICmdRead

The PICTBridge:IDPrint command.

Description
  • Enables or disables printing the oscilloscope model and serial number on the print output.
Usage
  • Using the .query() method will send the PICTBridge:IDPrint? query.
  • Using the .verify(value) method will send the PICTBridge:IDPrint? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the PICTBridge:IDPrint value command.
SCPI Syntax 
- PICTBridge:IDPrint {DEFLT|OFF|ON}
- PICTBridge:IDPrint?
Info
  • DEFLT is the default setting of the printer.
  • ON enables the oscilloscope model and serial number print on the print output.
  • OFF disables the oscilloscope model and serial number print on the print output.

PictbridgeImagesize

Bases: SCPICmdWrite, SCPICmdRead

The PICTBridge:IMAGESize command.

Description
  • This command specifies the image print size.
Usage
  • Using the .query() method will send the PICTBridge:IMAGESize? query.
  • Using the .verify(value) method will send the PICTBridge:IMAGESize? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the PICTBridge:IMAGESize value command.
SCPI Syntax 
- PICTBridge:IMAGESize {DEFLT|IN2P5BY3P25|L|IN4BY6|L2|IN8BY10|L4|E|CARD|HAGAKIPcard|CM6BY8|CM7BY10|CM9BY13|CM10BY15|CM13BY18|CM15BY21|CM18BY24|A4|LETTER}
- PICTBridge:IMAGESize?
Info
  • DEFLT for a default image print size.
  • IN2P5BY3P25 for a 2_5````*3_25 image print size.
  • L for a 3_5````*5 image print size.
  • IN4BY6 for a 4*6 image print size.
  • L2 for a 5*7 image print size.
  • IN8BY10 for a 8*10 image print size.
  • L4 for a 254 MM*178 MM image print size.
  • E for a 110 MM*74 MM image print size.
  • CARD for a 89 MM*55 MM image print size.
  • HAGAKIPcard for a 100 MM*148 MM image print size.
  • CM6BY8 for a 6 CM*8 CM image print size.
  • CM7BY10 for a 7 CM*10 CM image print size.
  • CM9BY13 for a 9 CM*13 CM image print size.
  • CM10BY15 for a 10 CM*15 CM image print size.
  • CM13BY18 or a 13 CM*18 CM image print size.
  • CM15BY21 for a 15 CM*21 CM image print size.
  • CM18BY24 for a 18 CM*24 CM image print size.
  • A4 for a A4 image print size.
  • LETTER for a Letter image print size.

PictbridgePapersize

Bases: SCPICmdWrite, SCPICmdRead

The PICTBridge:PAPERSize command.

Description
  • Sets the output print paper size.
Usage
  • Using the .query() method will send the PICTBridge:PAPERSize? query.
  • Using the .verify(value) method will send the PICTBridge:PAPERSize? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the PICTBridge:PAPERSize value command.
SCPI Syntax 
- PICTBridge:PAPERSize DEFLT|L|L2|HAGAKIPCARD|MM54BY86|MM100BY150|IN4BY6|IN8BY10|LETTER|IN11BY17|A0|A1|A2|A3|A4|A5|A6|A7|A8|A9|B0|B1|B2|B3|B4|B5|B6|B7|B8|B9|ROLL89MM|ROLL127MM|ROLL100MM|ROLL210MM}
- PICTBridge:PAPERSize?
Info
  • DEFLT for a default paper size.
  • L for a paper size L.
  • L2 for a paper size 2L.
  • HAGAKIPCARD for a paper size Hagaki.
  • MM54BY86 for a card paper size.
  • MM100BY150 for paper size of 100*150 MM.
  • IN4BY6 for a paper size of 4*6.
  • IN8BY10 for a paper size of 8*10.
  • LETTER for a letter paper size.
  • IN11BY17 for a paper size of 11*17.
  • A0 for a A0 paper size.
  • A1 for a A1 paper size.
  • A2 for a A2 paper size.
  • A3 for a A3 paper size.
  • A4 for a A4 paper size.
  • A5 for a A5 paper size.
  • A6 for a A6 paper size.
  • A7 for a A7 paper size.
  • A8 for a A8 paper size.
  • A9 for a A9 paper size.
  • B0 for a B0 paper size.
  • B1 for a B1 paper size.
  • B2 for a B2 paper size.
  • B3 for a B3 paper size.
  • B4 for a B4 paper size.
  • B5 for a B5 paper size.
  • B6 for a B6 paper size.
  • B7 for a B7 paper size.
  • B8 for a B8 paper size.
  • B9 for a B9 paper size.
  • ROLL89MM for a 89 MM Roll paper size.
  • ROLL127MM for a 127 MM Roll paper size.
  • ROLL100MM for a 100 MM Roll paper size.
  • ROLL210MM for a 210 MM Roll paper size.

PictbridgePapertype

Bases: SCPICmdWrite, SCPICmdRead

The PICTBridge:PAPERType command.

Description
  • This command specifies the paper type.
Usage
  • Using the .query() method will send the PICTBridge:PAPERType? query.
  • Using the .verify(value) method will send the PICTBridge:PAPERType? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the PICTBridge:PAPERType value command.
SCPI Syntax 
- PICTBridge:PAPERType {DEFLT|PLAIN|PHOTO|FASTPHOTO}
- PICTBridge:PAPERType?
Info
  • DEFLT for a default print paper type.
  • PLAIN for a plain print paper type.
  • PHOTO for a photo print paper type.
  • FASTPHOTO for a fastphoto print paper type.

PictbridgePrintqual

Bases: SCPICmdWrite, SCPICmdRead

The PICTBridge:PRINTQual command.

Description
  • This command specifies the output print quality.
Usage
  • Using the .query() method will send the PICTBridge:PRINTQual? query.
  • Using the .verify(value) method will send the PICTBridge:PRINTQual? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the PICTBridge:PRINTQual value command.
SCPI Syntax 
- PICTBridge:PRINTQual {DEFLT|NRMAL|FINE|DRAFT}
- PICTBridge:PRINTQual?
Info
  • DEFLT for the default quality print.
  • NRMAL for a normal quality print.
  • FINE for a fine quality print.
  • DRAFT for a draft quality print.