[python source code]

display

The display commands module.

These commands are used in the following models: TekScopePC

THIS FILE IS AUTO-GENERATED, IT SHOULD NOT BE MANUALLY MODIFIED.

Please report an issue if one is found.

Commands and Queries 
- DISplay:CH<x>:INVERTColor COLOR<y>
- DISplay:CH<x>:INVERTColor?
- DISplay:CH<x>:NORMALColor COLOR<y>
- DISplay:CH<x>:NORMALColor?
- DISplay:COLors {NORMal|INVERTed}
- DISplay:COLors?
- DISplay:GLObal:B<x>:STATE {ON|OFF|<NR1>}
- DISplay:GLObal:B<x>:STATE?
- DISplay:GLObal:CH<x>:STATE {ON|OFF|<NR1>}
- DISplay:GLObal:CH<x>:STATE?
- DISplay:GLObal:MATH<x>:STATE {ON|OFF|<NR1>}
- DISplay:GLObal:MATH<x>:STATE?
- DISplay:GLObal:PLOT<x>:STATE {ON|OFF|<NR1>}
- DISplay:GLObal:PLOT<x>:STATE?
- DISplay:GLObal:REF<x>:STATE {ON|OFF|<NR1>}
- DISplay:GLObal:REF<x>:STATE?
- DISplay:INTENSITy:BACKLight {LOW|MEDium|HIGH}
- DISplay:INTENSITy:BACKLight:AUTODim:ENAble {ON|OFF}
- DISplay:INTENSITy:BACKLight:AUTODim:ENAble?
- DISplay:INTENSITy:BACKLight:AUTODim:TIMe <NR1>
- DISplay:INTENSITy:BACKLight:AUTODim:TIMe?
- DISplay:INTENSITy:BACKLight?
- DISplay:INTENSITy?
- DISplay:MATHFFTView1:AUTOScale {ON|OFF|<NR1>}
- DISplay:MATHFFTView1:AUTOScale?
- DISplay:MATHFFTView1:CURSor:ASOUrce?
- DISplay:MATHFFTView1:CURSor:BSOUrce?
- DISplay:MATHFFTView1:CURSor:DDT?
- DISplay:MATHFFTView1:CURSor:FUNCtion {WAVEform|VBArs|HBArs|SCREEN}
- DISplay:MATHFFTView1:CURSor:FUNCtion?
- DISplay:MATHFFTView1:CURSor:HBArs:APOSition <NR3>
- DISplay:MATHFFTView1:CURSor:HBArs:APOSition?
- DISplay:MATHFFTView1:CURSor:HBArs:AUNIts?
- DISplay:MATHFFTView1:CURSor:HBArs:BPOSition <NR3>
- DISplay:MATHFFTView1:CURSor:HBArs:BPOSition?
- DISplay:MATHFFTView1:CURSor:HBArs:BUNIts?
- DISplay:MATHFFTView1:CURSor:HBArs:DELTa?
- DISplay:MATHFFTView1:CURSor:MODe {INDEPENDENT|TRACK}
- DISplay:MATHFFTView1:CURSor:MODe?
- DISplay:MATHFFTView1:CURSor:ONEOVERDELTATVALUE?
- DISplay:MATHFFTView1:CURSor:ROLOCATION {GRATICULE|BADGE}
- DISplay:MATHFFTView1:CURSor:ROLOCATION?
- DISplay:MATHFFTView1:CURSor:SCREEN:AXPOSition <NR3>
- DISplay:MATHFFTView1:CURSor:SCREEN:AXPOSition?
- DISplay:MATHFFTView1:CURSor:SCREEN:AYPOSition <NR3>
- DISplay:MATHFFTView1:CURSor:SCREEN:AYPOSition?
- DISplay:MATHFFTView1:CURSor:SCREEN:BXPOSition <NR3>
- DISplay:MATHFFTView1:CURSor:SCREEN:BXPOSition?
- DISplay:MATHFFTView1:CURSor:SCREEN:BYPOSition <NR3>
- DISplay:MATHFFTView1:CURSor:SCREEN:BYPOSition?
- DISplay:MATHFFTView1:CURSor:STATE {ON|OFF|<NR1>}
- DISplay:MATHFFTView1:CURSor:STATE?
- DISplay:MATHFFTView1:CURSor:VBArs:APOSition <NR3>
- DISplay:MATHFFTView1:CURSor:VBArs:APOSition?
- DISplay:MATHFFTView1:CURSor:VBArs:AUNIts?
- DISplay:MATHFFTView1:CURSor:VBArs:BPOSition <NR3>
- DISplay:MATHFFTView1:CURSor:VBArs:BPOSition?
- DISplay:MATHFFTView1:CURSor:VBArs:BUNIts?
- DISplay:MATHFFTView1:CURSor:VBArs:DELTa?
- DISplay:MATHFFTView1:CURSor:WAVEform:APOSition <NR3>
- DISplay:MATHFFTView1:CURSor:WAVEform:APOSition?
- DISplay:MATHFFTView1:CURSor:WAVEform:BPOSition <NR3>
- DISplay:MATHFFTView1:CURSor:WAVEform:BPOSition?
- DISplay:MATHFFTView1:GRIDlines {HORizontal|VERTical|BOTH}
- DISplay:MATHFFTView1:GRIDlines?
- DISplay:MATHFFTView1:MATH:MATH<x>:STATE {ON|OFF|<NR1>}
- DISplay:MATHFFTView1:MATH:MATH<x>:STATE?
- DISplay:MATHFFTView1:XAXIS:SCALE {LINEAr|LOG}
- DISplay:MATHFFTView1:XAXIS:SCALE?
- DISplay:MATHFFTView1:YAXIS:SCALE {LINEAr|DBM}
- DISplay:MATHFFTView1:YAXIS:SCALE?
- DISplay:MATHFFTView1:ZOOM:XAXIS:FROM <NR3>
- DISplay:MATHFFTView1:ZOOM:XAXIS:FROM?
- DISplay:MATHFFTView1:ZOOM:XAXIS:TO <NR3>
- DISplay:MATHFFTView1:ZOOM:YAXIS:FROM <NR3>
- DISplay:MATHFFTView1:ZOOM:YAXIS:FROM?
- DISplay:MATHFFTView1:ZOOM:YAXIS:TO <NR3>
- DISplay:MATHFFTView1:ZOOM:YAXIS:TO?
- DISplay:Math<x>:INVERTColor COLOR<y>
- DISplay:Math<x>:INVERTColor?
- DISplay:Math<x>:NORMALColor COLOR<y>
- DISplay:Math<x>:NORMALColor?
- DISplay:PERSistence {OFF|AUTO|INFPersist|INFInite|VARpersist|CLEAR}
- DISplay:PERSistence:RESET
- DISplay:PERSistence?
- DISplay:PLOTVIEW<x>:XAXIS:SCALE {LINEAR|LOG}
- DISplay:PLOTVIEW<x>:XAXIS:SCALE?
- DISplay:PLOTVIEW<x>:YAXIS:SCALE {LINEAR|LOG}
- DISplay:PLOTVIEW<x>:YAXIS:SCALE?
- DISplay:PLOTView1:AUTOScale {ON|OFF|<NR1>}
- DISplay:PLOTView1:AUTOScale?
- DISplay:PLOTView1:CURSor:ASOUrce?
- DISplay:PLOTView1:CURSor:BSOUrce?
- DISplay:PLOTView1:CURSor:DDT?
- DISplay:PLOTView1:CURSor:FUNCtion {WAVEFORM|VBArs|HBArs|SCREEN}
- DISplay:PLOTView1:CURSor:FUNCtion?
- DISplay:PLOTView1:CURSor:HBArs:APOSition <NR3>
- DISplay:PLOTView1:CURSor:HBArs:APOSition?
- DISplay:PLOTView1:CURSor:HBArs:AUNIts?
- DISplay:PLOTView1:CURSor:HBArs:BPOSition <NR3>
- DISplay:PLOTView1:CURSor:HBArs:BPOSition?
- DISplay:PLOTView1:CURSor:HBArs:BUNIts?
- DISplay:PLOTView1:CURSor:HBArs:DELTa?
- DISplay:PLOTView1:CURSor:MODe {INDEPENDENT|TRACK}
- DISplay:PLOTView1:CURSor:MODe?
- DISplay:PLOTView1:CURSor:ONEOVERDELTATVALUE?
- DISplay:PLOTView1:CURSor:ROLOCATION {GRATICULE|BADGE}
- DISplay:PLOTView1:CURSor:ROLOCATION?
- DISplay:PLOTView1:CURSor:SCREEN:AXPOSition <NR3>
- DISplay:PLOTView1:CURSor:SCREEN:AXPOSition?
- DISplay:PLOTView1:CURSor:SCREEN:AYPOSition <NR3>
- DISplay:PLOTView1:CURSor:SCREEN:AYPOSition?
- DISplay:PLOTView1:CURSor:SCREEN:BXPOSition <NR3>
- DISplay:PLOTView1:CURSor:SCREEN:BXPOSition?
- DISplay:PLOTView1:CURSor:SCREEN:BYPOSition <NR3>
- DISplay:PLOTView1:CURSor:SCREEN:BYPOSition?
- DISplay:PLOTView1:CURSor:SPLITMODE {SAME|SPLIT}
- DISplay:PLOTView1:CURSor:SPLITMODE?
- DISplay:PLOTView1:CURSor:STATE {ON|OFF|<NR1>}
- DISplay:PLOTView1:CURSor:STATE?
- DISplay:PLOTView1:CURSor:VBArs:APOSition <NR3>
- DISplay:PLOTView1:CURSor:VBArs:APOSition?
- DISplay:PLOTView1:CURSor:VBArs:BPOSition <NR3>
- DISplay:PLOTView1:CURSor:VBArs:BPOSition?
- DISplay:PLOTView1:CURSor:VBArs:DELTa?
- DISplay:PLOTView1:CURSor:VBArs:UNIts?
- DISplay:PLOTView1:CURSor:WAVEform:APOSition <NR3>
- DISplay:PLOTView1:CURSor:WAVEform:APOSition?
- DISplay:PLOTView1:CURSor:WAVEform:BPOSition <NR3>
- DISplay:PLOTView1:CURSor:WAVEform:BPOSition?
- DISplay:PLOTView1:GRIDlines {HORizontal|VERTical|BOTH}
- DISplay:PLOTView1:GRIDlines?
- DISplay:PLOTView1:ZOOM:XAXIS:FROM <NR3>
- DISplay:PLOTView1:ZOOM:XAXIS:FROM?
- DISplay:PLOTView1:ZOOM:XAXIS:TO <NR3>
- DISplay:PLOTView1:ZOOM:XAXIS:TO?
- DISplay:PLOTView1:ZOOM:YAXIS:FROM <NR3>
- DISplay:PLOTView1:ZOOM:YAXIS:FROM?
- DISplay:PLOTView1:ZOOM:YAXIS:TO <NR3>
- DISplay:PLOTView1:ZOOM:YAXIS:TO?
- DISplay:REF<x>:INVERTColor COLOR<y>
- DISplay:REF<x>:INVERTColor?
- DISplay:REF<x>:NORMALColor COLOR<y>
- DISplay:REF<x>:NORMALColor?
- DISplay:REFFFTView<x>:AUTOScale {OFF|ON|0|1|<NR1>}
- DISplay:REFFFTView<x>:AUTOScale?
- DISplay:REFFFTView<x>:CURSor:ASOUrce?
- DISplay:REFFFTView<x>:CURSor:BSOUrce?
- DISplay:REFFFTView<x>:CURSor:DDT?
- DISplay:REFFFTView<x>:CURSor:FUNCtion {WAVEform|VBArs|HBArs|SCREEN}
- DISplay:REFFFTView<x>:CURSor:FUNCtion?
- DISplay:REFFFTView<x>:CURSor:HBArs:APOSition <NR3>
- DISplay:REFFFTView<x>:CURSor:HBArs:APOSition?
- DISplay:REFFFTView<x>:CURSor:HBArs:AUNIts?
- DISplay:REFFFTView<x>:CURSor:HBArs:BPOSition <NR3>
- DISplay:REFFFTView<x>:CURSor:HBArs:BPOSition?
- DISplay:REFFFTView<x>:CURSor:HBArs:BUNIts?
- DISplay:REFFFTView<x>:CURSor:HBArs:DELTa?
- DISplay:REFFFTView<x>:CURSor:MODe {INDEPENDENT|TRACK}
- DISplay:REFFFTView<x>:CURSor:MODe?
- DISplay:REFFFTView<x>:CURSor:ONEOVERDELTATVALUE?
- DISplay:REFFFTView<x>:CURSor:ROLOCATION {GRATICULE|BADGE}
- DISplay:REFFFTView<x>:CURSor:ROLOCATION?
- DISplay:REFFFTView<x>:CURSor:SCREEN:AXPOSition <NR3>
- DISplay:REFFFTView<x>:CURSor:SCREEN:AXPOSition?
- DISplay:REFFFTView<x>:CURSor:SCREEN:AYPOSition <NR3>
- DISplay:REFFFTView<x>:CURSor:SCREEN:AYPOSition?
- DISplay:REFFFTView<x>:CURSor:SCREEN:BXPOSition <NR3>
- DISplay:REFFFTView<x>:CURSor:SCREEN:BXPOSition?
- DISplay:REFFFTView<x>:CURSor:SCREEN:BYPOSition <NR3>
- DISplay:REFFFTView<x>:CURSor:SCREEN:BYPOSition?
- DISplay:REFFFTView<x>:CURSor:SPLITMODE {SAME|SPLIT}
- DISplay:REFFFTView<x>:CURSor:SPLITMODE?
- DISplay:REFFFTView<x>:CURSor:STATE {ON|OFF|1|0}
- DISplay:REFFFTView<x>:CURSor:STATE?
- DISplay:REFFFTView<x>:CURSor:VBArs:APOSition <NR3>
- DISplay:REFFFTView<x>:CURSor:VBArs:APOSition?
- DISplay:REFFFTView<x>:CURSor:VBArs:BPOSition <NR3>
- DISplay:REFFFTView<x>:CURSor:VBArs:BPOSition?
- DISplay:REFFFTView<x>:CURSor:VBArs:DELTa?
- DISplay:REFFFTView<x>:CURSor:VBArs:UNIts?
- DISplay:REFFFTView<x>:CURSor:WAVEform:AHPOSition?
- DISplay:REFFFTView<x>:CURSor:WAVEform:APOSition <NR3>
- DISplay:REFFFTView<x>:CURSor:WAVEform:APOSition?
- DISplay:REFFFTView<x>:CURSor:WAVEform:AVPOSition?
- DISplay:REFFFTView<x>:CURSor:WAVEform:BHPOSition?
- DISplay:REFFFTView<x>:CURSor:WAVEform:BPOSition <NR3>
- DISplay:REFFFTView<x>:CURSor:WAVEform:BPOSition?
- DISplay:REFFFTView<x>:CURSor:WAVEform:BVPOSition?
- DISplay:REFFFTView<x>:GRIDlines {HORizontal|VERTical|BOTH}
- DISplay:REFFFTView<x>:GRIDlines?
- DISplay:REFFFTView<x>:REF:REF<x>:STATE boolean
- DISplay:REFFFTView<x>:REF:REF<x>:STATE?
- DISplay:REFFFTView<x>:XAXIS:SCALE {LINEAr|LOG}
- DISplay:REFFFTView<x>:XAXIS:SCALE?
- DISplay:REFFFTView<x>:ZOOM:XAXIS:FROM <NR3>
- DISplay:REFFFTView<x>:ZOOM:XAXIS:FROM?
- DISplay:REFFFTView<x>:ZOOM:XAXIS:TO <NR3>
- DISplay:REFFFTView<x>:ZOOM:XAXIS:TO?
- DISplay:REFFFTView<x>:ZOOM:YAXIS:FROM <NR3>
- DISplay:REFFFTView<x>:ZOOM:YAXIS:FROM?
- DISplay:REFFFTView<x>:ZOOM:YAXIS:TO <NR3>
- DISplay:REFFFTView<x>:ZOOM:YAXIS:TO?
- DISplay:SELect:BUS BUS<x>
- DISplay:SELect:BUS?
- DISplay:SELect:MATH MATH<x>
- DISplay:SELect:MATH?
- DISplay:SELect:REFerence {NONE|REF<x>}
- DISplay:SELect:REFerence?
- DISplay:SELect:SOUrce {NONE|CH<x>|BUS<x>|MATH<x>|PLOT<x>|REF<x>}
- DISplay:SELect:SOUrce?
- DISplay:SELect:SPECView1:SOUrce {CH<x>}
- DISplay:SELect:SPECView1:SOUrce?
- DISplay:SELect:VIEW {WAVEVIEW1|MATHFFT<x>|PLOTVIEW<x>|REFFFT<x>}
- DISplay:SELect:VIEW?
- DISplay:SELect:WAVEView1:SOUrce {S<x>_Ch<x>|CH<x>|MATH<x>|BUS<x>|REF<x>|PLOT<x>}
- DISplay:SELect:WAVEView1:SOUrce?
- DISplay:SPECView1:CURSor:CURSOR:ANOISEDensity?
- DISplay:SPECView1:CURSor:CURSOR:ASOUrce {AUTO|CH<x>}
- DISplay:SPECView1:CURSor:CURSOR:ASOUrce?
- DISplay:SPECView1:CURSor:CURSOR:BNOISE?
- DISplay:SPECView1:CURSor:CURSOR:BSOUrce {AUTO|CH<x>}
- DISplay:SPECView1:CURSor:CURSOR:BSOUrce?
- DISplay:SPECView1:CURSor:CURSOR:HBArs:APOSition?
- DISplay:SPECView1:CURSor:CURSOR:HBArs:AUNIts?
- DISplay:SPECView1:CURSor:CURSOR:HBArs:BPOSition?
- DISplay:SPECView1:CURSor:CURSOR:HBArs:BUNIts?
- DISplay:SPECView1:CURSor:CURSOR:READout {ABSOLUTE|DELTA}
- DISplay:SPECView1:CURSor:CURSOR:READout?
- DISplay:SPECView1:CURSor:CURSOR:SPLITMODE {SAME|SPLIT}
- DISplay:SPECView1:CURSor:CURSOR:SPLITMODE?
- DISplay:SPECView1:CURSor:CURSOR:STATE {ON|OFF}
- DISplay:SPECView1:CURSor:CURSOR:STATE?
- DISplay:SPECView1:CURSor:CURSOR:VBArs:APOSition <NR3>
- DISplay:SPECView1:CURSor:CURSOR:VBArs:APOSition?
- DISplay:SPECView1:CURSor:CURSOR:VBArs:BPOSition <NR3>
- DISplay:SPECView1:CURSor:CURSOR:VBArs:BPOSition?
- DISplay:SPECView1:CURSor:CURSOR:VBArs:UNIts?
- DISplay:SPECView1:CURSor:CURSOR:WAVEform:APOSition <NR3>
- DISplay:SPECView1:CURSor:CURSOR:WAVEform:APOSition?
- DISplay:SPECView1:CURSor:CURSOR:WAVEform:BPOSition <NR3>
- DISplay:SPECView1:CURSor:CURSOR:WAVEform:BPOSition?
- DISplay:SPECView1:GRAticule {GRId|TIMe|FULl|NONe}
- DISplay:SPECView1:GRAticule?
- DISplay:SPECView1:HORZ {LOG|LINEAr}
- DISplay:SPECView1:HORZ?
- DISplay:SPECView1:INTENSITy:GRATicule <NR2>
- DISplay:SPECView1:INTENSITy:GRATicule?
- DISplay:SPECView1:INTENSITy:WAVEform <NR2>
- DISplay:SPECView1:INTENSITy:WAVEform?
- DISplay:SPECView1:VIEWStyle {OVErlay|STAcked}
- DISplay:SPECView1:VIEWStyle?
- DISplay:VARpersist <NR3>
- DISplay:VARpersist?
- DISplay:WAVEView1:BUS:B<x>:STATE {ON|OFF|1|0}
- DISplay:WAVEView1:BUS:B<x>:STATE?
- DISplay:WAVEView1:BUS:B<x>:VERTical:POSition <NR3>
- DISplay:WAVEView1:BUS:B<x>:VERTical:POSition?
- DISplay:WAVEView1:CH<x>:STATE {ON|OFF|<NR1>}
- DISplay:WAVEView1:CH<x>:STATE?
- DISplay:WAVEView1:CH<x>:VERTical:POSition <NR3>
- DISplay:WAVEView1:CH<x>:VERTical:POSition?
- DISplay:WAVEView1:CH<x>:VERTical:SCAle <NR3>
- DISplay:WAVEView1:CH<x>:VERTical:SCAle?
- DISplay:WAVEView1:CH<x>_D<x>:STATE {ON|OFF|<NR1>}
- DISplay:WAVEView1:CH<x>_D<x>:STATE?
- DISplay:WAVEView1:CH<x>_DALL:STATE {ON|OFF|<NR1>}
- DISplay:WAVEView1:CH<x>_DALL:STATE?
- DISplay:WAVEView1:CH<x>_DALL:VERTical:POSition <NR3>
- DISplay:WAVEView1:CH<x>_DALL:VERTical:POSition?
- DISplay:WAVEView1:CURSor:CURSOR1:ASOUrce {AUTO|CH<x>|BUS<x>|MATH<x>|REF<x>|PLOT<x>}
- DISplay:WAVEView1:CURSor:CURSOR1:ASOUrce?
- DISplay:WAVEView1:CURSor:CURSOR1:BSOUrce {CH<x>|BUS<x>|MATH<x>|REF<x>|PLOT<x>}
- DISplay:WAVEView1:CURSor:CURSOR1:BSOUrce?
- DISplay:WAVEView1:CURSor:CURSOR1:DDT?
- DISplay:WAVEView1:CURSor:CURSOR1:FUNCtion {SCREEN|WAVEFORM|VBArs|HBArs}
- DISplay:WAVEView1:CURSor:CURSOR1:FUNCtion?
- DISplay:WAVEView1:CURSor:CURSOR1:HBArs:APOSition <NR3>
- DISplay:WAVEView1:CURSor:CURSOR1:HBArs:APOSition?
- DISplay:WAVEView1:CURSor:CURSOR1:HBArs:AUNIts?
- DISplay:WAVEView1:CURSor:CURSOR1:HBArs:BPOSition <NR3>
- DISplay:WAVEView1:CURSor:CURSOR1:HBArs:BPOSition?
- DISplay:WAVEView1:CURSor:CURSOR1:HBArs:BUNIts?
- DISplay:WAVEView1:CURSor:CURSOR1:HBArs:DELTa?
- DISplay:WAVEView1:CURSor:CURSOR1:MODe {INDEPENDENT|TRACK}
- DISplay:WAVEView1:CURSor:CURSOR1:ONEOVERDELTATVALUE?
- DISplay:WAVEView1:CURSor:CURSOR1:SCREEN:AXPOSition <NR3>
- DISplay:WAVEView1:CURSor:CURSOR1:SCREEN:AXPOSition?
- DISplay:WAVEView1:CURSor:CURSOR1:SCREEN:AYPOSition <NR3>
- DISplay:WAVEView1:CURSor:CURSOR1:SCREEN:AYPOSition?
- DISplay:WAVEView1:CURSor:CURSOR1:SCREEN:BXPOSition <NR3>
- DISplay:WAVEView1:CURSor:CURSOR1:SCREEN:BXPOSition?
- DISplay:WAVEView1:CURSor:CURSOR1:SCREEN:BYPOSition <NR3>
- DISplay:WAVEView1:CURSor:CURSOR1:SCREEN:BYPOSition?
- DISplay:WAVEView1:CURSor:CURSOR1:SPLITMODE {SAME|SPLIT}
- DISplay:WAVEView1:CURSor:CURSOR1:SPLITMODE?
- DISplay:WAVEView1:CURSor:CURSOR1:STATE {ON|OFF|<NR1>}
- DISplay:WAVEView1:CURSor:CURSOR1:STATE?
- DISplay:WAVEView1:CURSor:CURSOR1:VBArs:APOSition <NR3>
- DISplay:WAVEView1:CURSor:CURSOR1:VBArs:APOSition?
- DISplay:WAVEView1:CURSor:CURSOR1:VBArs:BPOSition <NR3>
- DISplay:WAVEView1:CURSor:CURSOR1:VBArs:BPOSition?
- DISplay:WAVEView1:CURSor:CURSOR1:VBArs:DELTa?
- DISplay:WAVEView1:CURSor:CURSOR1:VBArs:UNIts?
- DISplay:WAVEView1:CURSor:CURSOR1:WAVEform:APOSition <NR3>
- DISplay:WAVEView1:CURSor:CURSOR1:WAVEform:APOSition?
- DISplay:WAVEView1:CURSor:CURSOR1:WAVEform:BPOSition <NR3>
- DISplay:WAVEView1:CURSor:CURSOR1:WAVEform:BPOSition?
- DISplay:WAVEView1:CURSor:CURSOR1?
- DISplay:WAVEView1:CURSor:CURSOR:WAVEform:ALL:Values?
- DISplay:WAVEView1:CURSor:CURSOR:WAVEform:AVPOSition?
- DISplay:WAVEView1:CURSor:CURSOR:WAVEform:BVPOSition?
- DISplay:WAVEView1:CURSor?
- DISplay:WAVEView1:FILTer {SINX|LINear}
- DISplay:WAVEView1:FILTer?
- DISplay:WAVEView1:GRAticule {GRId|TIMe|FULl|NONe}
- DISplay:WAVEView1:GRAticule?
- DISplay:WAVEView1:INTENSITy:GRATicule <NR2>
- DISplay:WAVEView1:INTENSITy:GRATicule?
- DISplay:WAVEView1:INTENSITy:WAVEform <NR2>
- DISplay:WAVEView1:INTENSITy:WAVEform?
- DISplay:WAVEView1:MATH:MATH<x>:AUTOScale {ON|OFF|<NR1>}
- DISplay:WAVEView1:MATH:MATH<x>:AUTOScale?
- DISplay:WAVEView1:MATH:MATH<x>:STATE {ON|OFF|<NR1>}
- DISplay:WAVEView1:MATH:MATH<x>:STATE?
- DISplay:WAVEView1:MATH:MATH<x>:VERTical:POSition <NR3>
- DISplay:WAVEView1:MATH:MATH<x>:VERTical:POSition?
- DISplay:WAVEView1:MATH:MATH<x>:VERTical:SCAle <NR3>
- DISplay:WAVEView1:MATH:MATH<x>:VERTical:SCAle?
- DISplay:WAVEView1:PLOT:PLOT<x>:AUTOScale {ON|OFF|<NR1>}
- DISplay:WAVEView1:PLOT:PLOT<x>:AUTOScale?
- DISplay:WAVEView1:PLOT:PLOT<x>:STATE {ON|OFF|<NR1>}
- DISplay:WAVEView1:PLOT:PLOT<x>:STATE?
- DISplay:WAVEView1:PLOT:PLOT<x>:VERTical:POSition <NR3>
- DISplay:WAVEView1:PLOT:PLOT<x>:VERTical:POSition?
- DISplay:WAVEView1:PLOT:PLOT<x>:VERTical:SCAle <NR3>
- DISplay:WAVEView1:PLOT:PLOT<x>:VERTical:SCAle?
- DISplay:WAVEView1:REF:REF<x>:FRAMe <NR1>
- DISplay:WAVEView1:REF:REF<x>:FRAMe?
- DISplay:WAVEView1:REF:REF<x>:STATE {ON|OFF|<NR1>}
- DISplay:WAVEView1:REF:REF<x>:STATE?
- DISplay:WAVEView1:REF:REF<x>:VERTical:POSition <NR3>
- DISplay:WAVEView1:REF:REF<x>:VERTical:POSition?
- DISplay:WAVEView1:REF:REF<x>:VERTical:SCAle <NR3>
- DISplay:WAVEView1:REF:REF<x>:VERTical:SCAle?
- DISplay:WAVEView1:REF<x>_DALL:FRAMe <NR1>
- DISplay:WAVEView1:REF<x>_DALL:FRAMe?
- DISplay:WAVEView1:RF_FREQuency<x>:VERTical:POSition <NR3>
- DISplay:WAVEView1:RF_FREQuency<x>:VERTical:POSition?
- DISplay:WAVEView1:RF_FREQuency<x>:VERTical:SCAle <NR3>
- DISplay:WAVEView1:RF_FREQuency<x>:VERTical:SCAle?
- DISplay:WAVEView1:RF_MAGnitude<x>:VERTical:POSition <NR3>
- DISplay:WAVEView1:RF_MAGnitude<x>:VERTical:POSition?
- DISplay:WAVEView1:RF_MAGnitude<x>:VERTical:SCAle <NR3>
- DISplay:WAVEView1:RF_MAGnitude<x>:VERTical:SCAle?
- DISplay:WAVEView1:RF_PHASe<x>:VERTical:POSition <NR3>
- DISplay:WAVEView1:RF_PHASe<x>:VERTical:POSition?
- DISplay:WAVEView1:RF_PHASe<x>:VERTical:SCAle <NR3>
- DISplay:WAVEView1:RF_PHASe<x>:VERTical:SCAle?
- DISplay:WAVEView1:STYle {VECtors|DOTsonly}
- DISplay:WAVEView1:STYle?
- DISplay:WAVEView1:VIEWStyle {OVErlay|STAcked}
- DISplay:WAVEView1:VIEWStyle?
- DISplay:WAVEView1:ZOOM:ZOOM1:HORizontal:POSition <NR3>
- DISplay:WAVEView1:ZOOM:ZOOM1:HORizontal:POSition?
- DISplay:WAVEView1:ZOOM:ZOOM1:HORizontal:SCALe <NR3>
- DISplay:WAVEView1:ZOOM:ZOOM1:HORizontal:SCALe?
- DISplay:WAVEView1:ZOOM:ZOOM1:HORizontal:WINSCALe <NR3>
- DISplay:WAVEView1:ZOOM:ZOOM1:HORizontal:WINSCALe?
- DISplay:WAVEView1:ZOOM:ZOOM1:STATe {ON|OFF|<NR1>}
- DISplay:WAVEView1:ZOOM:ZOOM1:STATe?
- DISplay:WAVEView1:ZOOM:ZOOM1:VERTical:POSition <NR3>
- DISplay:WAVEView1:ZOOM:ZOOM1:VERTical:POSition?
- DISplay:WAVEView1:ZOOM:ZOOM1:VERTical:SCALe <NR3>
- DISplay:WAVEView1:ZOOM:ZOOM1:VERTical:SCALe?
- DISplay:WAVEView1:ZOOM:ZOOM1?
- DISplay:WAVEView1:ZOOM?
- DISplay:WAVEView:CURSor:CURSOR1:ROLOCATION {GRATICULE|BADGE}
- DISplay:WAVEView:CURSor:CURSOR1:ROLOCATION?
- DISplay:WAVEView:GRIDTYPE {MOVEABLE|FIXED}
- DISplay:WAVEView:GRIDTYPE?
- DISplay:WAVEform {ON|OFF|<NR1>}
- DISplay:WAVEform?
- DISplay?

Display

Bases: SCPICmdRead

The DISplay command.

Description
  • This query-only command returns the current Display settings.
Usage
  • Using the .query() method will send the DISplay? query.
  • Using the .verify(value) method will send the DISplay? query and raise an AssertionError if the returned value does not match value.
SCPI Syntax 
- DISplay?
Properties
  • .colors: The DISplay:COLors command.
  • .global: The DISplay:GLObal command tree.
  • .intensity: The DISplay:INTENSITy command.
  • .mathfftview1: The DISplay:MATHFFTView1 command tree.
  • .persistence: The DISplay:PERSistence command.
  • .plotview: The DISplay:PLOTVIEW<x> command tree.
  • .plotview1: The DISplay:PLOTView1 command tree.
  • .reffftview: The DISplay:REFFFTView<x> command tree.
  • .select: The DISplay:SELect command tree.
  • .specview1: The DISplay:SPECView1 command tree.
  • .varpersist: The DISplay:VARpersist command.
  • .waveview: The DISplay:WAVEView command tree.
  • .waveview1: The DISplay:WAVEView1 command tree.
  • .waveform: The DISplay:WAVEform command.
  • .ch: The DISplay:CH<x> command tree.
  • .math: The DISplay:Math<x> command tree.
  • .ref: The DISplay:REF<x> command tree.

ch property 

ch: dict[int, DisplayChannel]

Return the DISplay:CH<x> command tree.

Usage
  • Using the .query() method will send the DISplay:CH<x>? query.
  • Using the .verify(value) method will send the DISplay:CH<x>? query and raise an AssertionError if the returned value does not match value.
Info
  • CH<x> specifies the input channel for which you want to change the waveform color, where is the channel number.
Sub-properties
  • .invertcolor: The DISplay:CH<x>:INVERTColor command.
  • .normalcolor: The DISplay:CH<x>:NORMALColor command.

colors property 

colors: DisplayColors

Return the DISplay:COLors command.

Description
  • Sets or queries the color mode for the graticule and waveform display.
Usage
  • Using the .query() method will send the DISplay:COLors? query.
  • Using the .verify(value) method will send the DISplay:COLors? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:COLors value command.
SCPI Syntax 
- DISplay:COLors {NORMal|INVERTed}
- DISplay:COLors?
Info
  • NORMal specifies normal color mode.
  • INVERTed specifies inverted color mode.

global_ property 

global_: DisplayGlobal

Return the DISplay:GLObal command tree.

Usage
  • Using the .query() method will send the DISplay:GLObal? query.
  • Using the .verify(value) method will send the DISplay:GLObal? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .b: The DISplay:GLObal:B<x> command tree.
  • .ch: The DISplay:GLObal:CH<x> command tree.
  • .math: The DISplay:GLObal:MATH<x> command tree.
  • .plot: The DISplay:GLObal:PLOT<x> command tree.
  • .ref: The DISplay:GLObal:REF<x> command tree.

intensity property 

intensity: DisplayIntensity

Return the DISplay:INTENSITy command.

Description
  • This query-only command returns the waveform saturation level and screen saver settings.
Usage
  • Using the .query() method will send the DISplay:INTENSITy? query.
  • Using the .verify(value) method will send the DISplay:INTENSITy? query and raise an AssertionError if the returned value does not match value.
SCPI Syntax 
- DISplay:INTENSITy?
Sub-properties
  • .backlight: The DISplay:INTENSITy:BACKLight command.

math property 

math: dict[int, DisplayMathItem]

Return the DISplay:Math<x> command tree.

Usage
  • Using the .query() method will send the DISplay:Math<x>? query.
  • Using the .verify(value) method will send the DISplay:Math<x>? query and raise an AssertionError if the returned value does not match value.
Info
  • Math<x> specifies the math waveform for which you want to change the waveform color, where is the math waveform number.
Sub-properties
  • .invertcolor: The DISplay:Math<x>:INVERTColor command.
  • .normalcolor: The DISplay:Math<x>:NORMALColor command.

mathfftview1 property 

mathfftview1: DisplayMathfftview1

Return the DISplay:MATHFFTView1 command tree.

Usage
  • Using the .query() method will send the DISplay:MATHFFTView1? query.
  • Using the .verify(value) method will send the DISplay:MATHFFTView1? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .cursor: The DISplay:MATHFFTView1:CURSor command tree.
  • .autoscale: The DISplay:MATHFFTView1:AUTOScale command.
  • .gridlines: The DISplay:MATHFFTView1:GRIDlines command.
  • .math: The DISplay:MATHFFTView1:MATH command tree.
  • .xaxis: The DISplay:MATHFFTView1:XAXIS command tree.
  • .yaxis: The DISplay:MATHFFTView1:YAXIS command tree.
  • .zoom: The DISplay:MATHFFTView1:ZOOM command tree.

persistence property 

persistence: DisplayPersistence

Return the DISplay:PERSistence command.

Description
  • This command sets or queries the display persistence for analog waveforms. Persistence is valid for wave views only.
Usage
  • Using the .query() method will send the DISplay:PERSistence? query.
  • Using the .verify(value) method will send the DISplay:PERSistence? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:PERSistence value command.
SCPI Syntax 
- DISplay:PERSistence {OFF|AUTO|INFPersist|INFInite|VARpersist|CLEAR}
- DISplay:PERSistence?
Info
  • OFF disables the persistence aspect of the display.
  • AUTO automatically set the persistence.
  • INFPersist sets a display mode where any pixels, once touched by samples, remain set until cleared by a mode change.
  • INFInite sets a display mode where any pixels, once touched by samples, remain set until cleared by a mode change.
  • VARPersist sets a display mode where set pixels are gradually dimmed.
  • CLEAR resets the persist time count down and clears the display of acquired points.
Sub-properties
  • .reset: The DISplay:PERSistence:RESET command.

plotview property 

plotview: dict[int, DisplayPlotviewItem]

Return the DISplay:PLOTVIEW<x> command tree.

Usage
  • Using the .query() method will send the DISplay:PLOTVIEW<x>? query.
  • Using the .verify(value) method will send the DISplay:PLOTVIEW<x>? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .xaxis: The DISplay:PLOTVIEW<x>:XAXIS command tree.
  • .yaxis: The DISplay:PLOTVIEW<x>:YAXIS command tree.

plotview1 property 

plotview1: DisplayPlotview1

Return the DISplay:PLOTView1 command tree.

Usage
  • Using the .query() method will send the DISplay:PLOTView1? query.
  • Using the .verify(value) method will send the DISplay:PLOTView1? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .cursor: The DISplay:PLOTView1:CURSor command tree.
  • .autoscale: The DISplay:PLOTView1:AUTOScale command.
  • .gridlines: The DISplay:PLOTView1:GRIDlines command.
  • .zoom: The DISplay:PLOTView1:ZOOM command tree.

ref property 

ref: dict[int, DisplayRefItem]

Return the DISplay:REF<x> command tree.

Usage
  • Using the .query() method will send the DISplay:REF<x>? query.
  • Using the .verify(value) method will send the DISplay:REF<x>? query and raise an AssertionError if the returned value does not match value.
Info
  • REF<x> specifies the reference waveform for which you want to change the waveform color, where is the reference waveform number.
Sub-properties
  • .invertcolor: The DISplay:REF<x>:INVERTColor command.
  • .normalcolor: The DISplay:REF<x>:NORMALColor command.

reffftview property 

reffftview: dict[int, DisplayReffftviewItem]

Return the DISplay:REFFFTView<x> command tree.

Usage
  • Using the .query() method will send the DISplay:REFFFTView<x>? query.
  • Using the .verify(value) method will send the DISplay:REFFFTView<x>? query and raise an AssertionError if the returned value does not match value.
Info
  • REFFFTView<x> is the Reference FFT plot number.
Sub-properties
  • .autoscale: The DISplay:REFFFTView<x>:AUTOScale command.
  • .cursor: The DISplay:REFFFTView<x>:CURSor command tree.
  • .gridlines: The DISplay:REFFFTView<x>:GRIDlines command.
  • .ref: The DISplay:REFFFTView<x>:REF command tree.
  • .xaxis: The DISplay:REFFFTView<x>:XAXIS command tree.
  • .zoom: The DISplay:REFFFTView<x>:ZOOM command tree.

select property 

select: DisplaySelect

Return the DISplay:SELect command tree.

Usage
  • Using the .query() method will send the DISplay:SELect? query.
  • Using the .verify(value) method will send the DISplay:SELect? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .bus: The DISplay:SELect:BUS command.
  • .math: The DISplay:SELect:MATH command.
  • .reference: The DISplay:SELect:REFerence command.
  • .source: The DISplay:SELect:SOUrce command.
  • .specview1: The DISplay:SELect:SPECView1 command tree.
  • .view: The DISplay:SELect:VIEW command.
  • .waveview1: The DISplay:SELect:WAVEView1 command tree.

specview1 property 

specview1: DisplaySpecview1

Return the DISplay:SPECView1 command tree.

Usage
  • Using the .query() method will send the DISplay:SPECView1? query.
  • Using the .verify(value) method will send the DISplay:SPECView1? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .cursor: The DISplay:SPECView1:CURSor command tree.
  • .graticule: The DISplay:SPECView1:GRAticule command.
  • .horz: The DISplay:SPECView1:HORZ command.
  • .intensity: The DISplay:SPECView1:INTENSITy command tree.
  • .viewstyle: The DISplay:SPECView1:VIEWStyle command.

varpersist property 

varpersist: DisplayVarpersist

Return the DISplay:VARpersist command.

Description
  • This command sets or queries display persistence decay time, which is the approximate decay time for a freshly struck persistence sample.
Usage
  • Using the .query() method will send the DISplay:VARpersist? query.
  • Using the .verify(value) method will send the DISplay:VARpersist? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:VARpersist value command.
SCPI Syntax 
- DISplay:VARpersist <NR3>
- DISplay:VARpersist?
Info
  • <NR3> indicates the persistence decay time and ranges from 0.5 to 100.

waveform property 

waveform: DisplayWaveform

Return the DISplay:WAVEform command.

Description
  • This command globally enables or disables the waveform display. When disabled, the waveform is still acquired and held in memory, but it is not drawn to the screen. Disabling the waveform display may improve processing speed.
Usage
  • Using the .query() method will send the DISplay:WAVEform? query.
  • Using the .verify(value) method will send the DISplay:WAVEform? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:WAVEform value command.
SCPI Syntax 
- DISplay:WAVEform {ON|OFF|<NR1>}
- DISplay:WAVEform?
Info
  • <NR1> enables or disables the waveform display. 0 disables the waveform display; any other value enables the waveform display.
  • ON enables the waveform display.
  • OFF disables the waveform display.

waveview property 

waveview: DisplayWaveview

Return the DISplay:WAVEView command tree.

Usage
  • Using the .query() method will send the DISplay:WAVEView? query.
  • Using the .verify(value) method will send the DISplay:WAVEView? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .cursor: The DISplay:WAVEView:CURSor command tree.
  • .gridtype: The DISplay:WAVEView:GRIDTYPE command.

waveview1 property 

waveview1: DisplayWaveview1

Return the DISplay:WAVEView1 command tree.

Usage
  • Using the .query() method will send the DISplay:WAVEView1? query.
  • Using the .verify(value) method will send the DISplay:WAVEView1? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .bus: The DISplay:WAVEView1:BUS command tree.
  • .ch: The DISplay:WAVEView1:CH<x> command tree.
  • .cursor: The DISplay:WAVEView1:CURSor command.
  • .filter: The DISplay:WAVEView1:FILTer command.
  • .graticule: The DISplay:WAVEView1:GRAticule command.
  • .intensity: The DISplay:WAVEView1:INTENSITy command tree.
  • .math: The DISplay:WAVEView1:MATH command tree.
  • .plot: The DISplay:WAVEView1:PLOT command tree.
  • .ref: The DISplay:WAVEView1:REF command tree.
  • .rf_frequency: The DISplay:WAVEView1:RF_FREQuency<x> command tree.
  • .rf_magnitude: The DISplay:WAVEView1:RF_MAGnitude<x> command tree.
  • .rf_phase: The DISplay:WAVEView1:RF_PHASe<x> command tree.
  • .style: The DISplay:WAVEView1:STYle command.
  • .viewstyle: The DISplay:WAVEView1:VIEWStyle command.
  • .zoom: The DISplay:WAVEView1:ZOOM command.
  • .refx: The DISplay:WAVEView1:REF<x> command tree.

DisplayChannel

Bases: ValidatedChannel, SCPICmdRead

The DISplay:CH<x> command tree.

Usage
  • Using the .query() method will send the DISplay:CH<x>? query.
  • Using the .verify(value) method will send the DISplay:CH<x>? query and raise an AssertionError if the returned value does not match value.
Info
  • CH<x> specifies the input channel for which you want to change the waveform color, where is the channel number.
Properties
  • .invertcolor: The DISplay:CH<x>:INVERTColor command.
  • .normalcolor: The DISplay:CH<x>:NORMALColor command.

invertcolor property 

invertcolor: DisplayChannelInvertcolor

Return the DISplay:CH<x>:INVERTColor command.

Description
  • This command sets or queries the Inverted mode color of the specified input source to the specified color. You can assign one of 48 unique colors to any channel, math, or reference waveform. These colors replace the default Inverted colors and remain in effect until you reset the colors.
Usage
  • Using the .query() method will send the DISplay:CH<x>:INVERTColor? query.
  • Using the .verify(value) method will send the DISplay:CH<x>:INVERTColor? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:CH<x>:INVERTColor value command.
SCPI Syntax 
- DISplay:CH<x>:INVERTColor COLOR<y>
- DISplay:CH<x>:INVERTColor?
Info
  • CH<x> specifies the input channel for which you want to change the waveform color, where is the channel number.
  • COLOR<y> specifies the color to assign to the specified waveform, where = 0 to 47.

normalcolor property 

normalcolor: DisplayChannelNormalcolor

Return the DISplay:CH<x>:NORMALColor command.

Description
  • This command sets or queries the normal mode color of the specified input source to the specified color. You can assign one of 48 unique colors to any channel, math, or reference waveform. These colors replace the default normal colors and remain in effect until you reset the colors.
Usage
  • Using the .query() method will send the DISplay:CH<x>:NORMALColor? query.
  • Using the .verify(value) method will send the DISplay:CH<x>:NORMALColor? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:CH<x>:NORMALColor value command.
SCPI Syntax 
- DISplay:CH<x>:NORMALColor COLOR<y>
- DISplay:CH<x>:NORMALColor?
Info
  • CH<x> specifies the input channel for which you want to change the waveform color, where is the channel number.
  • COLOR<y> specifies the color to assign to the specified waveform, where = 0 to 47.

DisplayChannelInvertcolor

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:CH<x>:INVERTColor command.

Description
  • This command sets or queries the Inverted mode color of the specified input source to the specified color. You can assign one of 48 unique colors to any channel, math, or reference waveform. These colors replace the default Inverted colors and remain in effect until you reset the colors.
Usage
  • Using the .query() method will send the DISplay:CH<x>:INVERTColor? query.
  • Using the .verify(value) method will send the DISplay:CH<x>:INVERTColor? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:CH<x>:INVERTColor value command.
SCPI Syntax 
- DISplay:CH<x>:INVERTColor COLOR<y>
- DISplay:CH<x>:INVERTColor?
Info
  • CH<x> specifies the input channel for which you want to change the waveform color, where is the channel number.
  • COLOR<y> specifies the color to assign to the specified waveform, where = 0 to 47.

DisplayChannelNormalcolor

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:CH<x>:NORMALColor command.

Description
  • This command sets or queries the normal mode color of the specified input source to the specified color. You can assign one of 48 unique colors to any channel, math, or reference waveform. These colors replace the default normal colors and remain in effect until you reset the colors.
Usage
  • Using the .query() method will send the DISplay:CH<x>:NORMALColor? query.
  • Using the .verify(value) method will send the DISplay:CH<x>:NORMALColor? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:CH<x>:NORMALColor value command.
SCPI Syntax 
- DISplay:CH<x>:NORMALColor COLOR<y>
- DISplay:CH<x>:NORMALColor?
Info
  • CH<x> specifies the input channel for which you want to change the waveform color, where is the channel number.
  • COLOR<y> specifies the color to assign to the specified waveform, where = 0 to 47.

DisplayColors

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:COLors command.

Description
  • Sets or queries the color mode for the graticule and waveform display.
Usage
  • Using the .query() method will send the DISplay:COLors? query.
  • Using the .verify(value) method will send the DISplay:COLors? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:COLors value command.
SCPI Syntax 
- DISplay:COLors {NORMal|INVERTed}
- DISplay:COLors?
Info
  • NORMal specifies normal color mode.
  • INVERTed specifies inverted color mode.

DisplayGlobal

Bases: SCPICmdRead

The DISplay:GLObal command tree.

Usage
  • Using the .query() method will send the DISplay:GLObal? query.
  • Using the .verify(value) method will send the DISplay:GLObal? query and raise an AssertionError if the returned value does not match value.
Properties
  • .b: The DISplay:GLObal:B<x> command tree.
  • .ch: The DISplay:GLObal:CH<x> command tree.
  • .math: The DISplay:GLObal:MATH<x> command tree.
  • .plot: The DISplay:GLObal:PLOT<x> command tree.
  • .ref: The DISplay:GLObal:REF<x> command tree.

b property 

b: dict[int, DisplayGlobalBItem]

Return the DISplay:GLObal:B<x> command tree.

Usage
  • Using the .query() method will send the DISplay:GLObal:B<x>? query.
  • Using the .verify(value) method will send the DISplay:GLObal:B<x>? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .state: The DISplay:GLObal:B<x>:STATE command.

ch property 

ch: dict[int, DisplayGlobalChannel]

Return the DISplay:GLObal:CH<x> command tree.

Usage
  • Using the .query() method will send the DISplay:GLObal:CH<x>? query.
  • Using the .verify(value) method will send the DISplay:GLObal:CH<x>? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .state: The DISplay:GLObal:CH<x>:STATE command.

math property 

math: dict[int, DisplayGlobalMathItem]

Return the DISplay:GLObal:MATH<x> command tree.

Usage
  • Using the .query() method will send the DISplay:GLObal:MATH<x>? query.
  • Using the .verify(value) method will send the DISplay:GLObal:MATH<x>? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .state: The DISplay:GLObal:MATH<x>:STATE command.

plot property 

plot: dict[int, DisplayGlobalPlotItem]

Return the DISplay:GLObal:PLOT<x> command tree.

Usage
  • Using the .query() method will send the DISplay:GLObal:PLOT<x>? query.
  • Using the .verify(value) method will send the DISplay:GLObal:PLOT<x>? query and raise an AssertionError if the returned value does not match value.
Info
  • PLOT<x> is the plot number.
Sub-properties
  • .state: The DISplay:GLObal:PLOT<x>:STATE command.

ref property 

ref: dict[int, DisplayGlobalRefItem]

Return the DISplay:GLObal:REF<x> command tree.

Usage
  • Using the .query() method will send the DISplay:GLObal:REF<x>? query.
  • Using the .verify(value) method will send the DISplay:GLObal:REF<x>? query and raise an AssertionError if the returned value does not match value.
Info
  • REF<x> is the Reference waveform number.
Sub-properties
  • .state: The DISplay:GLObal:REF<x>:STATE command.

DisplayGlobalBItem

Bases: ValidatedDynamicNumberCmd, SCPICmdRead

The DISplay:GLObal:B<x> command tree.

Usage
  • Using the .query() method will send the DISplay:GLObal:B<x>? query.
  • Using the .verify(value) method will send the DISplay:GLObal:B<x>? query and raise an AssertionError if the returned value does not match value.
Properties
  • .state: The DISplay:GLObal:B<x>:STATE command.

state property 

state: DisplayGlobalBItemState

Return the DISplay:GLObal:B<x>:STATE command.

Description
  • This command sets or queries the global state (display mode On or Off) of the specified bus. Setting this value true (On or NR1 ≠ 0 ) turns on the source in the waveform view. Setting this value false (Off or NR1 = 0 ) turns off the source in the waveform view. This command only works if the specified bus is added already.
Usage
  • Using the .query() method will send the DISplay:GLObal:B<x>:STATE? query.
  • Using the .verify(value) method will send the DISplay:GLObal:B<x>:STATE? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:GLObal:B<x>:STATE value command.
SCPI Syntax 
- DISplay:GLObal:B<x>:STATE {ON|OFF|<NR1>}
- DISplay:GLObal:B<x>:STATE?
Info
  • <NR1> = 0 disables the display of the specified bus; any other value enables display of the bus.
  • ON enables display of the specified bus.
  • OFF disables display of the specified bus.

DisplayGlobalBItemState

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:GLObal:B<x>:STATE command.

Description
  • This command sets or queries the global state (display mode On or Off) of the specified bus. Setting this value true (On or NR1 ≠ 0 ) turns on the source in the waveform view. Setting this value false (Off or NR1 = 0 ) turns off the source in the waveform view. This command only works if the specified bus is added already.
Usage
  • Using the .query() method will send the DISplay:GLObal:B<x>:STATE? query.
  • Using the .verify(value) method will send the DISplay:GLObal:B<x>:STATE? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:GLObal:B<x>:STATE value command.
SCPI Syntax 
- DISplay:GLObal:B<x>:STATE {ON|OFF|<NR1>}
- DISplay:GLObal:B<x>:STATE?
Info
  • <NR1> = 0 disables the display of the specified bus; any other value enables display of the bus.
  • ON enables display of the specified bus.
  • OFF disables display of the specified bus.

DisplayGlobalChannel

Bases: ValidatedChannel, SCPICmdRead

The DISplay:GLObal:CH<x> command tree.

Usage
  • Using the .query() method will send the DISplay:GLObal:CH<x>? query.
  • Using the .verify(value) method will send the DISplay:GLObal:CH<x>? query and raise an AssertionError if the returned value does not match value.
Properties
  • .state: The DISplay:GLObal:CH<x>:STATE command.

state property 

state: DisplayGlobalChannelState

Return the DISplay:GLObal:CH<x>:STATE command.

Description
  • This command sets or queries the global state (display mode On or Off) of the specified channel (both analog and digital). Setting this value true (On or NR1 ≠ 0 ) turns on the source in the waveform view. Setting this value false (Off or NR1 = 0 ) turns off the source in the waveform view. This command only works if the specified channel is added already.
Usage
  • Using the .query() method will send the DISplay:GLObal:CH<x>:STATE? query.
  • Using the .verify(value) method will send the DISplay:GLObal:CH<x>:STATE? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:GLObal:CH<x>:STATE value command.
SCPI Syntax 
- DISplay:GLObal:CH<x>:STATE {ON|OFF|<NR1>}
- DISplay:GLObal:CH<x>:STATE?
Info
  • <NR1> = 0 disables the display of the specified channel; any other value enables display of the channel.
  • ON enables display of the specified channel.
  • OFF disables display of the specified channel.

DisplayGlobalChannelState

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:GLObal:CH<x>:STATE command.

Description
  • This command sets or queries the global state (display mode On or Off) of the specified channel (both analog and digital). Setting this value true (On or NR1 ≠ 0 ) turns on the source in the waveform view. Setting this value false (Off or NR1 = 0 ) turns off the source in the waveform view. This command only works if the specified channel is added already.
Usage
  • Using the .query() method will send the DISplay:GLObal:CH<x>:STATE? query.
  • Using the .verify(value) method will send the DISplay:GLObal:CH<x>:STATE? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:GLObal:CH<x>:STATE value command.
SCPI Syntax 
- DISplay:GLObal:CH<x>:STATE {ON|OFF|<NR1>}
- DISplay:GLObal:CH<x>:STATE?
Info
  • <NR1> = 0 disables the display of the specified channel; any other value enables display of the channel.
  • ON enables display of the specified channel.
  • OFF disables display of the specified channel.

DisplayGlobalMathItem

Bases: ValidatedDynamicNumberCmd, SCPICmdRead

The DISplay:GLObal:MATH<x> command tree.

Usage
  • Using the .query() method will send the DISplay:GLObal:MATH<x>? query.
  • Using the .verify(value) method will send the DISplay:GLObal:MATH<x>? query and raise an AssertionError if the returned value does not match value.
Properties
  • .state: The DISplay:GLObal:MATH<x>:STATE command.

state property 

state: DisplayGlobalMathItemState

Return the DISplay:GLObal:MATH<x>:STATE command.

Description
  • This command sets or queries the global state (display mode On or Off) of the specified math. Setting this value true (On or NR1 ≠ 0 ) turns on the source in the waveform view. Setting this value false (Off or NR1 = 0 ) turns off the source in the waveform view. This command only works if the specified math waveform is added already.
Usage
  • Using the .query() method will send the DISplay:GLObal:MATH<x>:STATE? query.
  • Using the .verify(value) method will send the DISplay:GLObal:MATH<x>:STATE? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:GLObal:MATH<x>:STATE value command.
SCPI Syntax 
- DISplay:GLObal:MATH<x>:STATE {ON|OFF|<NR1>}
- DISplay:GLObal:MATH<x>:STATE?
Info
  • <NR1> = 0 disables the display of the specified math; any other value enables display of the math.
  • ON enables display of the specified math.
  • OFF disables display of the specified math.

DisplayGlobalMathItemState

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:GLObal:MATH<x>:STATE command.

Description
  • This command sets or queries the global state (display mode On or Off) of the specified math. Setting this value true (On or NR1 ≠ 0 ) turns on the source in the waveform view. Setting this value false (Off or NR1 = 0 ) turns off the source in the waveform view. This command only works if the specified math waveform is added already.
Usage
  • Using the .query() method will send the DISplay:GLObal:MATH<x>:STATE? query.
  • Using the .verify(value) method will send the DISplay:GLObal:MATH<x>:STATE? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:GLObal:MATH<x>:STATE value command.
SCPI Syntax 
- DISplay:GLObal:MATH<x>:STATE {ON|OFF|<NR1>}
- DISplay:GLObal:MATH<x>:STATE?
Info
  • <NR1> = 0 disables the display of the specified math; any other value enables display of the math.
  • ON enables display of the specified math.
  • OFF disables display of the specified math.

DisplayGlobalPlotItem

Bases: ValidatedDynamicNumberCmd, SCPICmdRead

The DISplay:GLObal:PLOT<x> command tree.

Usage
  • Using the .query() method will send the DISplay:GLObal:PLOT<x>? query.
  • Using the .verify(value) method will send the DISplay:GLObal:PLOT<x>? query and raise an AssertionError if the returned value does not match value.
Info
  • PLOT<x> is the plot number.
Properties
  • .state: The DISplay:GLObal:PLOT<x>:STATE command.

state property 

state: DisplayGlobalPlotItemState

Return the DISplay:GLObal:PLOT<x>:STATE command.

Description
  • This command sets or queries the global state (display mode On or Off) of the specified time trend plot. Setting this value true (On or NR1 ≠ 0 ) turns on the source in the waveform view. Setting this value false (Off or NR1 = 0 ) turns off the source in the waveform view. This command only works if the specified plot is added already.
Usage
  • Using the .query() method will send the DISplay:GLObal:PLOT<x>:STATE? query.
  • Using the .verify(value) method will send the DISplay:GLObal:PLOT<x>:STATE? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:GLObal:PLOT<x>:STATE value command.
SCPI Syntax 
- DISplay:GLObal:PLOT<x>:STATE {ON|OFF|<NR1>}
- DISplay:GLObal:PLOT<x>:STATE?
Info
  • PLOT<x> is the plot number.
  • <NR1> = 0 disables the display of the specified plot; any other value enables display of the plot.
  • ON enables display of the specified plot.
  • OFF disables display of the specified plot.

DisplayGlobalPlotItemState

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:GLObal:PLOT<x>:STATE command.

Description
  • This command sets or queries the global state (display mode On or Off) of the specified time trend plot. Setting this value true (On or NR1 ≠ 0 ) turns on the source in the waveform view. Setting this value false (Off or NR1 = 0 ) turns off the source in the waveform view. This command only works if the specified plot is added already.
Usage
  • Using the .query() method will send the DISplay:GLObal:PLOT<x>:STATE? query.
  • Using the .verify(value) method will send the DISplay:GLObal:PLOT<x>:STATE? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:GLObal:PLOT<x>:STATE value command.
SCPI Syntax 
- DISplay:GLObal:PLOT<x>:STATE {ON|OFF|<NR1>}
- DISplay:GLObal:PLOT<x>:STATE?
Info
  • PLOT<x> is the plot number.
  • <NR1> = 0 disables the display of the specified plot; any other value enables display of the plot.
  • ON enables display of the specified plot.
  • OFF disables display of the specified plot.

DisplayGlobalRefItem

Bases: ValidatedDynamicNumberCmd, SCPICmdRead

The DISplay:GLObal:REF<x> command tree.

Usage
  • Using the .query() method will send the DISplay:GLObal:REF<x>? query.
  • Using the .verify(value) method will send the DISplay:GLObal:REF<x>? query and raise an AssertionError if the returned value does not match value.
Info
  • REF<x> is the Reference waveform number.
Properties
  • .state: The DISplay:GLObal:REF<x>:STATE command.

state property 

state: DisplayGlobalRefItemState

Return the DISplay:GLObal:REF<x>:STATE command.

Description
  • this command sets or queries the global state (display mode On or Off) of the specified reference waveform. Setting this value true (On or NR1 ≠ 0 ) turns on the source in the waveform view. Setting this value false (Off or NR1 = 0 ) turns off the source in the waveform view. This command only works if the specified reference waveform is added already.
Usage
  • Using the .query() method will send the DISplay:GLObal:REF<x>:STATE? query.
  • Using the .verify(value) method will send the DISplay:GLObal:REF<x>:STATE? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:GLObal:REF<x>:STATE value command.
SCPI Syntax 
- DISplay:GLObal:REF<x>:STATE {ON|OFF|<NR1>}
- DISplay:GLObal:REF<x>:STATE?
Info
  • REF<x> is the Reference waveform number.
  • <NR1> = 0 disables the display of the specified reference; any other value enables display of the reference.
  • ON enables display of the specified reference.
  • OFF disables display of the specified reference.

DisplayGlobalRefItemState

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:GLObal:REF<x>:STATE command.

Description
  • this command sets or queries the global state (display mode On or Off) of the specified reference waveform. Setting this value true (On or NR1 ≠ 0 ) turns on the source in the waveform view. Setting this value false (Off or NR1 = 0 ) turns off the source in the waveform view. This command only works if the specified reference waveform is added already.
Usage
  • Using the .query() method will send the DISplay:GLObal:REF<x>:STATE? query.
  • Using the .verify(value) method will send the DISplay:GLObal:REF<x>:STATE? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:GLObal:REF<x>:STATE value command.
SCPI Syntax 
- DISplay:GLObal:REF<x>:STATE {ON|OFF|<NR1>}
- DISplay:GLObal:REF<x>:STATE?
Info
  • REF<x> is the Reference waveform number.
  • <NR1> = 0 disables the display of the specified reference; any other value enables display of the reference.
  • ON enables display of the specified reference.
  • OFF disables display of the specified reference.

DisplayIntensity

Bases: SCPICmdRead

The DISplay:INTENSITy command.

Description
  • This query-only command returns the waveform saturation level and screen saver settings.
Usage
  • Using the .query() method will send the DISplay:INTENSITy? query.
  • Using the .verify(value) method will send the DISplay:INTENSITy? query and raise an AssertionError if the returned value does not match value.
SCPI Syntax 
- DISplay:INTENSITy?
Properties
  • .backlight: The DISplay:INTENSITy:BACKLight command.

backlight property 

backlight: DisplayIntensityBacklight

Return the DISplay:INTENSITy:BACKLight command.

Description
  • This command sets or queries the display backlight intensity setting.
Usage
  • Using the .query() method will send the DISplay:INTENSITy:BACKLight? query.
  • Using the .verify(value) method will send the DISplay:INTENSITy:BACKLight? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:INTENSITy:BACKLight value command.
SCPI Syntax 
- DISplay:INTENSITy:BACKLight {LOW|MEDium|HIGH}
- DISplay:INTENSITy:BACKLight?
Info
  • LOW selects a low brightness level.
  • MEDium selects a moderate brightness level.
  • HIGH selects a full brightness level.
Sub-properties
  • .autodim: The DISplay:INTENSITy:BACKLight:AUTODim command tree.

DisplayIntensityBacklight

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:INTENSITy:BACKLight command.

Description
  • This command sets or queries the display backlight intensity setting.
Usage
  • Using the .query() method will send the DISplay:INTENSITy:BACKLight? query.
  • Using the .verify(value) method will send the DISplay:INTENSITy:BACKLight? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:INTENSITy:BACKLight value command.
SCPI Syntax 
- DISplay:INTENSITy:BACKLight {LOW|MEDium|HIGH}
- DISplay:INTENSITy:BACKLight?
Info
  • LOW selects a low brightness level.
  • MEDium selects a moderate brightness level.
  • HIGH selects a full brightness level.
Properties
  • .autodim: The DISplay:INTENSITy:BACKLight:AUTODim command tree.

autodim property 

autodim: DisplayIntensityBacklightAutodim

Return the DISplay:INTENSITy:BACKLight:AUTODim command tree.

Usage
  • Using the .query() method will send the DISplay:INTENSITy:BACKLight:AUTODim? query.
  • Using the .verify(value) method will send the DISplay:INTENSITy:BACKLight:AUTODim? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .enable: The DISplay:INTENSITy:BACKLight:AUTODim:ENAble command.
  • .time: The DISplay:INTENSITy:BACKLight:AUTODim:TIMe command.

DisplayIntensityBacklightAutodim

Bases: SCPICmdRead

The DISplay:INTENSITy:BACKLight:AUTODim command tree.

Usage
  • Using the .query() method will send the DISplay:INTENSITy:BACKLight:AUTODim? query.
  • Using the .verify(value) method will send the DISplay:INTENSITy:BACKLight:AUTODim? query and raise an AssertionError if the returned value does not match value.
Properties
  • .enable: The DISplay:INTENSITy:BACKLight:AUTODim:ENAble command.
  • .time: The DISplay:INTENSITy:BACKLight:AUTODim:TIMe command.

enable property 

enable: DisplayIntensityBacklightAutodimEnable

Return the DISplay:INTENSITy:BACKLight:AUTODim:ENAble command.

Description
  • Sets or queries the state of the display auto-dim feature. The default is enabled. Once the backlight has dimmed, any button push, knob turn or mouse movement returns the backlight value to the value set by :DISplay:INTENSITy:BACKLight.
Usage
  • Using the .query() method will send the DISplay:INTENSITy:BACKLight:AUTODim:ENAble? query.
  • Using the .verify(value) method will send the DISplay:INTENSITy:BACKLight:AUTODim:ENAble? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:INTENSITy:BACKLight:AUTODim:ENAble value command.
SCPI Syntax 
- DISplay:INTENSITy:BACKLight:AUTODim:ENAble {ON|OFF}
- DISplay:INTENSITy:BACKLight:AUTODim:ENAble?
Info
  • ON enables the display auto-dim feature.
  • OFF disables the display auto-dim feature.

time property 

time: DisplayIntensityBacklightAutodimTime

Return the DISplay:INTENSITy:BACKLight:AUTODim:TIMe command.

Description
  • Sets or queries the amount of time, in minutes, to wait for no user interface activity before automatically dimming the display. The time can range from a minimum of 10 minutes to a maximum of 1440 minutes (24 hours). The default is 10 minutes.
Usage
  • Using the .query() method will send the DISplay:INTENSITy:BACKLight:AUTODim:TIMe? query.
  • Using the .verify(value) method will send the DISplay:INTENSITy:BACKLight:AUTODim:TIMe? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:INTENSITy:BACKLight:AUTODim:TIMe value command.
SCPI Syntax 
- DISplay:INTENSITy:BACKLight:AUTODim:TIMe <NR1>
- DISplay:INTENSITy:BACKLight:AUTODim:TIMe?
Info
  • <NR1> is the amount of time, in minutes, to wait for no user interface activity before automatically dimming the display.

DisplayIntensityBacklightAutodimEnable

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:INTENSITy:BACKLight:AUTODim:ENAble command.

Description
  • Sets or queries the state of the display auto-dim feature. The default is enabled. Once the backlight has dimmed, any button push, knob turn or mouse movement returns the backlight value to the value set by :DISplay:INTENSITy:BACKLight.
Usage
  • Using the .query() method will send the DISplay:INTENSITy:BACKLight:AUTODim:ENAble? query.
  • Using the .verify(value) method will send the DISplay:INTENSITy:BACKLight:AUTODim:ENAble? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:INTENSITy:BACKLight:AUTODim:ENAble value command.
SCPI Syntax 
- DISplay:INTENSITy:BACKLight:AUTODim:ENAble {ON|OFF}
- DISplay:INTENSITy:BACKLight:AUTODim:ENAble?
Info
  • ON enables the display auto-dim feature.
  • OFF disables the display auto-dim feature.

DisplayIntensityBacklightAutodimTime

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:INTENSITy:BACKLight:AUTODim:TIMe command.

Description
  • Sets or queries the amount of time, in minutes, to wait for no user interface activity before automatically dimming the display. The time can range from a minimum of 10 minutes to a maximum of 1440 minutes (24 hours). The default is 10 minutes.
Usage
  • Using the .query() method will send the DISplay:INTENSITy:BACKLight:AUTODim:TIMe? query.
  • Using the .verify(value) method will send the DISplay:INTENSITy:BACKLight:AUTODim:TIMe? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:INTENSITy:BACKLight:AUTODim:TIMe value command.
SCPI Syntax 
- DISplay:INTENSITy:BACKLight:AUTODim:TIMe <NR1>
- DISplay:INTENSITy:BACKLight:AUTODim:TIMe?
Info
  • <NR1> is the amount of time, in minutes, to wait for no user interface activity before automatically dimming the display.

DisplayMathItem

Bases: ValidatedDynamicNumberCmd, SCPICmdRead

The DISplay:Math<x> command tree.

Usage
  • Using the .query() method will send the DISplay:Math<x>? query.
  • Using the .verify(value) method will send the DISplay:Math<x>? query and raise an AssertionError if the returned value does not match value.
Info
  • Math<x> specifies the math waveform for which you want to change the waveform color, where is the math waveform number.
Properties
  • .invertcolor: The DISplay:Math<x>:INVERTColor command.
  • .normalcolor: The DISplay:Math<x>:NORMALColor command.

invertcolor property 

invertcolor: DisplayMathItemInvertcolor

Return the DISplay:Math<x>:INVERTColor command.

Description
  • This command sets or queries the Inverted mode color of the specified input source to the specified color. You can assign one of 48 unique colors to any channel, math, or reference waveform. These colors replace the default Inverted colors and remain in effect until you reset the colors.
Usage
  • Using the .query() method will send the DISplay:Math<x>:INVERTColor? query.
  • Using the .verify(value) method will send the DISplay:Math<x>:INVERTColor? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:Math<x>:INVERTColor value command.
SCPI Syntax 
- DISplay:Math<x>:INVERTColor COLOR<y>
- DISplay:Math<x>:INVERTColor?
Info
  • Math<x> specifies the math waveform for which you want to change the waveform color, where is the math waveform number.
  • COLOR<y> specifies the color to assign to the specified waveform, where = 0 to 47.

normalcolor property 

normalcolor: DisplayMathItemNormalcolor

Return the DISplay:Math<x>:NORMALColor command.

Description
  • This command sets or queries the normal mode color of the specified input source to the specified color. You can assign one of 48 unique colors to any channel, math, or reference waveform. These colors replace the default normal colors and remain in effect until you reset the colors.
Usage
  • Using the .query() method will send the DISplay:Math<x>:NORMALColor? query.
  • Using the .verify(value) method will send the DISplay:Math<x>:NORMALColor? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:Math<x>:NORMALColor value command.
SCPI Syntax 
- DISplay:Math<x>:NORMALColor COLOR<y>
- DISplay:Math<x>:NORMALColor?
Info
  • Math<x> specifies the math waveform for which you want to change the waveform color, where is the math waveform number.
  • COLOR<y> specifies the color to assign to the specified waveform, where = 0 to 47.

DisplayMathItemInvertcolor

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:Math<x>:INVERTColor command.

Description
  • This command sets or queries the Inverted mode color of the specified input source to the specified color. You can assign one of 48 unique colors to any channel, math, or reference waveform. These colors replace the default Inverted colors and remain in effect until you reset the colors.
Usage
  • Using the .query() method will send the DISplay:Math<x>:INVERTColor? query.
  • Using the .verify(value) method will send the DISplay:Math<x>:INVERTColor? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:Math<x>:INVERTColor value command.
SCPI Syntax 
- DISplay:Math<x>:INVERTColor COLOR<y>
- DISplay:Math<x>:INVERTColor?
Info
  • Math<x> specifies the math waveform for which you want to change the waveform color, where is the math waveform number.
  • COLOR<y> specifies the color to assign to the specified waveform, where = 0 to 47.

DisplayMathItemNormalcolor

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:Math<x>:NORMALColor command.

Description
  • This command sets or queries the normal mode color of the specified input source to the specified color. You can assign one of 48 unique colors to any channel, math, or reference waveform. These colors replace the default normal colors and remain in effect until you reset the colors.
Usage
  • Using the .query() method will send the DISplay:Math<x>:NORMALColor? query.
  • Using the .verify(value) method will send the DISplay:Math<x>:NORMALColor? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:Math<x>:NORMALColor value command.
SCPI Syntax 
- DISplay:Math<x>:NORMALColor COLOR<y>
- DISplay:Math<x>:NORMALColor?
Info
  • Math<x> specifies the math waveform for which you want to change the waveform color, where is the math waveform number.
  • COLOR<y> specifies the color to assign to the specified waveform, where = 0 to 47.

DisplayMathfftview1

Bases: SCPICmdRead

The DISplay:MATHFFTView1 command tree.

Usage
  • Using the .query() method will send the DISplay:MATHFFTView1? query.
  • Using the .verify(value) method will send the DISplay:MATHFFTView1? query and raise an AssertionError if the returned value does not match value.
Properties
  • .cursor: The DISplay:MATHFFTView1:CURSor command tree.
  • .autoscale: The DISplay:MATHFFTView1:AUTOScale command.
  • .gridlines: The DISplay:MATHFFTView1:GRIDlines command.
  • .math: The DISplay:MATHFFTView1:MATH command tree.
  • .xaxis: The DISplay:MATHFFTView1:XAXIS command tree.
  • .yaxis: The DISplay:MATHFFTView1:YAXIS command tree.
  • .zoom: The DISplay:MATHFFTView1:ZOOM command tree.

autoscale property 

autoscale: DisplayMathfftview1Autoscale

Return the DISplay:MATHFFTView1:AUTOScale command.

Description
  • This command sets or returns the enabled state of autoscale for Math/FFT waveforms.
Usage
  • Using the .query() method will send the DISplay:MATHFFTView1:AUTOScale? query.
  • Using the .verify(value) method will send the DISplay:MATHFFTView1:AUTOScale? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:MATHFFTView1:AUTOScale value command.
SCPI Syntax 
- DISplay:MATHFFTView1:AUTOScale {ON|OFF|<NR1>}
- DISplay:MATHFFTView1:AUTOScale?
Info
  • 1 is the Math-FFT waveform number.
  • OFF disables the autoscale feature.
  • ON enables the autoscale feature.
  • <NR1> = 0 disables the autoscale feature; any other value enables the autoscale feature.

cursor property 

cursor: DisplayMathfftview1Cursor

Return the DISplay:MATHFFTView1:CURSor command tree.

Usage
  • Using the .query() method will send the DISplay:MATHFFTView1:CURSor? query.
  • Using the .verify(value) method will send the DISplay:MATHFFTView1:CURSor? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .rolocation: The DISplay:MATHFFTView1:CURSor:ROLOCATION command.
  • .asource: The DISplay:MATHFFTView1:CURSor:ASOUrce command.
  • .bsource: The DISplay:MATHFFTView1:CURSor:BSOUrce command.
  • .ddt: The DISplay:MATHFFTView1:CURSor:DDT command.
  • .function: The DISplay:MATHFFTView1:CURSor:FUNCtion command.
  • .hbars: The DISplay:MATHFFTView1:CURSor:HBArs command tree.
  • .mode: The DISplay:MATHFFTView1:CURSor:MODe command.
  • .oneoverdeltatvalue: The DISplay:MATHFFTView1:CURSor:ONEOVERDELTATVALUE command.
  • .screen: The DISplay:MATHFFTView1:CURSor:SCREEN command tree.
  • .state: The DISplay:MATHFFTView1:CURSor:STATE command.
  • .vbars: The DISplay:MATHFFTView1:CURSor:VBArs command tree.
  • .waveform: The DISplay:MATHFFTView1:CURSor:WAVEform command tree.

gridlines property 

gridlines: DisplayMathfftview1Gridlines

Return the DISplay:MATHFFTView1:GRIDlines command.

Description
  • This command sets or queries the grid lines setting for the specified Math-FFT view.
Usage
  • Using the .query() method will send the DISplay:MATHFFTView1:GRIDlines? query.
  • Using the .verify(value) method will send the DISplay:MATHFFTView1:GRIDlines? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:MATHFFTView1:GRIDlines value command.
SCPI Syntax 
- DISplay:MATHFFTView1:GRIDlines {HORizontal|VERTical|BOTH}
- DISplay:MATHFFTView1:GRIDlines?
Info
  • 1 is the Math-FFT waveform number.
  • HORizontal specifies horizontal grid lines.
  • VERTical specifies vertical grid lines.
  • BOTH specifies both vertical and horizontal grid lines.

math property 

math: DisplayMathfftview1Math

Return the DISplay:MATHFFTView1:MATH command tree.

Usage
  • Using the .query() method will send the DISplay:MATHFFTView1:MATH? query.
  • Using the .verify(value) method will send the DISplay:MATHFFTView1:MATH? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .math: The DISplay:MATHFFTView1:MATH:MATH<x> command tree.

xaxis property 

xaxis: DisplayMathfftview1Xaxis

Return the DISplay:MATHFFTView1:XAXIS command tree.

Usage
  • Using the .query() method will send the DISplay:MATHFFTView1:XAXIS? query.
  • Using the .verify(value) method will send the DISplay:MATHFFTView1:XAXIS? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .scale: The DISplay:MATHFFTView1:XAXIS:SCALE command.

yaxis property 

yaxis: DisplayMathfftview1Yaxis

Return the DISplay:MATHFFTView1:YAXIS command tree.

Usage
  • Using the .query() method will send the DISplay:MATHFFTView1:YAXIS? query.
  • Using the .verify(value) method will send the DISplay:MATHFFTView1:YAXIS? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .scale: The DISplay:MATHFFTView1:YAXIS:SCALE command.

zoom property 

zoom: DisplayMathfftview1Zoom

Return the DISplay:MATHFFTView1:ZOOM command tree.

Usage
  • Using the .query() method will send the DISplay:MATHFFTView1:ZOOM? query.
  • Using the .verify(value) method will send the DISplay:MATHFFTView1:ZOOM? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .xaxis: The DISplay:MATHFFTView1:ZOOM:XAXIS command tree.
  • .yaxis: The DISplay:MATHFFTView1:ZOOM:YAXIS command tree.

DisplayMathfftview1Autoscale

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:MATHFFTView1:AUTOScale command.

Description
  • This command sets or returns the enabled state of autoscale for Math/FFT waveforms.
Usage
  • Using the .query() method will send the DISplay:MATHFFTView1:AUTOScale? query.
  • Using the .verify(value) method will send the DISplay:MATHFFTView1:AUTOScale? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:MATHFFTView1:AUTOScale value command.
SCPI Syntax 
- DISplay:MATHFFTView1:AUTOScale {ON|OFF|<NR1>}
- DISplay:MATHFFTView1:AUTOScale?
Info
  • 1 is the Math-FFT waveform number.
  • OFF disables the autoscale feature.
  • ON enables the autoscale feature.
  • <NR1> = 0 disables the autoscale feature; any other value enables the autoscale feature.

DisplayMathfftview1Cursor

Bases: SCPICmdRead

The DISplay:MATHFFTView1:CURSor command tree.

Usage
  • Using the .query() method will send the DISplay:MATHFFTView1:CURSor? query.
  • Using the .verify(value) method will send the DISplay:MATHFFTView1:CURSor? query and raise an AssertionError if the returned value does not match value.
Properties
  • .rolocation: The DISplay:MATHFFTView1:CURSor:ROLOCATION command.
  • .asource: The DISplay:MATHFFTView1:CURSor:ASOUrce command.
  • .bsource: The DISplay:MATHFFTView1:CURSor:BSOUrce command.
  • .ddt: The DISplay:MATHFFTView1:CURSor:DDT command.
  • .function: The DISplay:MATHFFTView1:CURSor:FUNCtion command.
  • .hbars: The DISplay:MATHFFTView1:CURSor:HBArs command tree.
  • .mode: The DISplay:MATHFFTView1:CURSor:MODe command.
  • .oneoverdeltatvalue: The DISplay:MATHFFTView1:CURSor:ONEOVERDELTATVALUE command.
  • .screen: The DISplay:MATHFFTView1:CURSor:SCREEN command tree.
  • .state: The DISplay:MATHFFTView1:CURSor:STATE command.
  • .vbars: The DISplay:MATHFFTView1:CURSor:VBArs command tree.
  • .waveform: The DISplay:MATHFFTView1:CURSor:WAVEform command tree.

asource property 

asource: DisplayMathfftview1CursorAsource

Return the DISplay:MATHFFTView1:CURSor:ASOUrce command.

Description
  • This command queries the Math-FFT waveform view source for cursor A.
Usage
  • Using the .query() method will send the DISplay:MATHFFTView1:CURSor:ASOUrce? query.
  • Using the .verify(value) method will send the DISplay:MATHFFTView1:CURSor:ASOUrce? query and raise an AssertionError if the returned value does not match value.
SCPI Syntax 
- DISplay:MATHFFTView1:CURSor:ASOUrce?
Info
  • 1 is the Math-FFT waveform number.

bsource property 

bsource: DisplayMathfftview1CursorBsource

Return the DISplay:MATHFFTView1:CURSor:BSOUrce command.

Description
  • This command queries the Math-FFT waveform view source for cursor B.
Usage
  • Using the .query() method will send the DISplay:MATHFFTView1:CURSor:BSOUrce? query.
  • Using the .verify(value) method will send the DISplay:MATHFFTView1:CURSor:BSOUrce? query and raise an AssertionError if the returned value does not match value.
SCPI Syntax 
- DISplay:MATHFFTView1:CURSor:BSOUrce?
Info
  • 1 is the Math-FFT waveform number.

ddt property 

ddt: DisplayMathfftview1CursorDdt

Return the DISplay:MATHFFTView1:CURSor:DDT command.

Description
  • This command queries the delta Y over delta X (ΔY/Δ X) cursor readout value of the specified cursor in the specified Math-FFT view.
Usage
  • Using the .query() method will send the DISplay:MATHFFTView1:CURSor:DDT? query.
  • Using the .verify(value) method will send the DISplay:MATHFFTView1:CURSor:DDT? query and raise an AssertionError if the returned value does not match value.
SCPI Syntax 
- DISplay:MATHFFTView1:CURSor:DDT?
Info
  • 1 is the Math-FFT waveform number.

function property 

function: DisplayMathfftview1CursorFunction

Return the DISplay:MATHFFTView1:CURSor:FUNCtion command.

Description
  • This command sets or queries the cursor type for the specified Math-FFT view.
Usage
  • Using the .query() method will send the DISplay:MATHFFTView1:CURSor:FUNCtion? query.
  • Using the .verify(value) method will send the DISplay:MATHFFTView1:CURSor:FUNCtion? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:MATHFFTView1:CURSor:FUNCtion value command.
SCPI Syntax 
- DISplay:MATHFFTView1:CURSor:FUNCtion {WAVEform|VBArs|HBArs|SCREEN}
- DISplay:MATHFFTView1:CURSor:FUNCtion?
Info
  • 1 is the Math-FFT waveform number.
  • WAVEFORM specifies to display the paired vertical cursors in YT display format for measuring waveform amplitude and time. Measurements are taken at where the cursor intersects the waveform, and tracks waveform changes.
  • VBArs specifies vertical bar cursors, which measure in horizontal units.
  • HBArs specifies horizontal bar cursors, which measure in vertical units.
  • SCREEN specifies to display both horizontal and vertical bar cursors, which display the horizontal and vertical positions of the cursors, not waveform levels. Use these cursors to measure anywhere in the waveform display area.

hbars property 

hbars: DisplayMathfftview1CursorHbars

Return the DISplay:MATHFFTView1:CURSor:HBArs command tree.

Usage
  • Using the .query() method will send the DISplay:MATHFFTView1:CURSor:HBArs? query.
  • Using the .verify(value) method will send the DISplay:MATHFFTView1:CURSor:HBArs? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .aposition: The DISplay:MATHFFTView1:CURSor:HBArs:APOSition command.
  • .aunits: The DISplay:MATHFFTView1:CURSor:HBArs:AUNIts command.
  • .bposition: The DISplay:MATHFFTView1:CURSor:HBArs:BPOSition command.
  • .bunits: The DISplay:MATHFFTView1:CURSor:HBArs:BUNIts command.
  • .delta: The DISplay:MATHFFTView1:CURSor:HBArs:DELTa command.

mode property 

mode: DisplayMathfftview1CursorMode

Return the DISplay:MATHFFTView1:CURSor:MODe command.

Description
  • This command sets or queries the cursor tracking mode of the specified Math-FFT view.
Usage
  • Using the .query() method will send the DISplay:MATHFFTView1:CURSor:MODe? query.
  • Using the .verify(value) method will send the DISplay:MATHFFTView1:CURSor:MODe? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:MATHFFTView1:CURSor:MODe value command.
SCPI Syntax 
- DISplay:MATHFFTView1:CURSor:MODe {INDEPENDENT|TRACK}
- DISplay:MATHFFTView1:CURSor:MODe?
Info
  • 1 is the Math-FFT waveform number.
  • INDEPENDENT allows independent adjustment of the two cursors.
  • TRACK ties the navigational functionality of the two cursors together. For cursor 1 adjustments, this ties the movement of the two cursors together; however, cursor 2 continues to move independently of cursor 1.

oneoverdeltatvalue property 

oneoverdeltatvalue: DisplayMathfftview1CursorOneoverdeltatvalue

Return the DISplay:MATHFFTView1:CURSor:ONEOVERDELTATVALUE command.

Description
  • This command queries the one over delta cursor readout value of the specified Math-FFT view.
Usage
  • Using the .query() method will send the DISplay:MATHFFTView1:CURSor:ONEOVERDELTATVALUE? query.
  • Using the .verify(value) method will send the DISplay:MATHFFTView1:CURSor:ONEOVERDELTATVALUE? query and raise an AssertionError if the returned value does not match value.
SCPI Syntax 
- DISplay:MATHFFTView1:CURSor:ONEOVERDELTATVALUE?
Info
  • 1 is the Math-FFT waveform number.

rolocation property 

rolocation: DisplayMathfftview1CursorRolocation

Return the DISplay:MATHFFTView1:CURSor:ROLOCATION command.

Description
  • This command sets or queries the location to display the specified Math FFT plot cursor readouts (in the plot graticule or in a badge in the Results Bar).
Usage
  • Using the .query() method will send the DISplay:MATHFFTView1:CURSor:ROLOCATION? query.
  • Using the .verify(value) method will send the DISplay:MATHFFTView1:CURSor:ROLOCATION? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:MATHFFTView1:CURSor:ROLOCATION value command.
SCPI Syntax 
- DISplay:MATHFFTView1:CURSor:ROLOCATION {GRATICULE|BADGE}
- DISplay:MATHFFTView1:CURSor:ROLOCATION?
Info
  • 1 is the Math FFT plot number.
  • GRATICULE sets the Math FFT plot cursor readouts to display as part of the cursors in the plot view.
  • BADGE removes the Math FFT plot cursor readouts from the cursors in the graticule and displays the cursor information as a badge in the Results Bar.

screen property 

screen: DisplayMathfftview1CursorScreen

Return the DISplay:MATHFFTView1:CURSor:SCREEN command tree.

Usage
  • Using the .query() method will send the DISplay:MATHFFTView1:CURSor:SCREEN? query.
  • Using the .verify(value) method will send the DISplay:MATHFFTView1:CURSor:SCREEN? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .axposition: The DISplay:MATHFFTView1:CURSor:SCREEN:AXPOSition command.
  • .ayposition: The DISplay:MATHFFTView1:CURSor:SCREEN:AYPOSition command.
  • .bxposition: The DISplay:MATHFFTView1:CURSor:SCREEN:BXPOSition command.
  • .byposition: The DISplay:MATHFFTView1:CURSor:SCREEN:BYPOSition command.

state property 

state: DisplayMathfftview1CursorState

Return the DISplay:MATHFFTView1:CURSor:STATE command.

Description
  • This command sets or queries the visible state of cursors for the specified Math-FFT view.
Usage
  • Using the .query() method will send the DISplay:MATHFFTView1:CURSor:STATE? query.
  • Using the .verify(value) method will send the DISplay:MATHFFTView1:CURSor:STATE? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:MATHFFTView1:CURSor:STATE value command.
SCPI Syntax 
- DISplay:MATHFFTView1:CURSor:STATE {ON|OFF|<NR1>}
- DISplay:MATHFFTView1:CURSor:STATE?
Info
  • 1 is the Math-FFT waveform number.
  • ON enables the cursors.
  • 1 enables the cursors.
  • OFF disables the cursors.
  • 0 disables the cursors.
  • <NR1> = 0 turns off cursors; any other value displays cursors.

vbars property 

vbars: DisplayMathfftview1CursorVbars

Return the DISplay:MATHFFTView1:CURSor:VBArs command tree.

Usage
  • Using the .query() method will send the DISplay:MATHFFTView1:CURSor:VBArs? query.
  • Using the .verify(value) method will send the DISplay:MATHFFTView1:CURSor:VBArs? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .aposition: The DISplay:MATHFFTView1:CURSor:VBArs:APOSition command.
  • .aunits: The DISplay:MATHFFTView1:CURSor:VBArs:AUNIts command.
  • .bposition: The DISplay:MATHFFTView1:CURSor:VBArs:BPOSition command.
  • .bunits: The DISplay:MATHFFTView1:CURSor:VBArs:BUNIts command.
  • .delta: The DISplay:MATHFFTView1:CURSor:VBArs:DELTa command.

waveform property 

waveform: DisplayMathfftview1CursorWaveform

Return the DISplay:MATHFFTView1:CURSor:WAVEform command tree.

Usage
  • Using the .query() method will send the DISplay:MATHFFTView1:CURSor:WAVEform? query.
  • Using the .verify(value) method will send the DISplay:MATHFFTView1:CURSor:WAVEform? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .aposition: The DISplay:MATHFFTView1:CURSor:WAVEform:APOSition command.
  • .bposition: The DISplay:MATHFFTView1:CURSor:WAVEform:BPOSition command.

DisplayMathfftview1CursorAsource

Bases: SCPICmdRead

The DISplay:MATHFFTView1:CURSor:ASOUrce command.

Description
  • This command queries the Math-FFT waveform view source for cursor A.
Usage
  • Using the .query() method will send the DISplay:MATHFFTView1:CURSor:ASOUrce? query.
  • Using the .verify(value) method will send the DISplay:MATHFFTView1:CURSor:ASOUrce? query and raise an AssertionError if the returned value does not match value.
SCPI Syntax 
- DISplay:MATHFFTView1:CURSor:ASOUrce?
Info
  • 1 is the Math-FFT waveform number.

DisplayMathfftview1CursorBsource

Bases: SCPICmdRead

The DISplay:MATHFFTView1:CURSor:BSOUrce command.

Description
  • This command queries the Math-FFT waveform view source for cursor B.
Usage
  • Using the .query() method will send the DISplay:MATHFFTView1:CURSor:BSOUrce? query.
  • Using the .verify(value) method will send the DISplay:MATHFFTView1:CURSor:BSOUrce? query and raise an AssertionError if the returned value does not match value.
SCPI Syntax 
- DISplay:MATHFFTView1:CURSor:BSOUrce?
Info
  • 1 is the Math-FFT waveform number.

DisplayMathfftview1CursorDdt

Bases: SCPICmdRead

The DISplay:MATHFFTView1:CURSor:DDT command.

Description
  • This command queries the delta Y over delta X (ΔY/Δ X) cursor readout value of the specified cursor in the specified Math-FFT view.
Usage
  • Using the .query() method will send the DISplay:MATHFFTView1:CURSor:DDT? query.
  • Using the .verify(value) method will send the DISplay:MATHFFTView1:CURSor:DDT? query and raise an AssertionError if the returned value does not match value.
SCPI Syntax 
- DISplay:MATHFFTView1:CURSor:DDT?
Info
  • 1 is the Math-FFT waveform number.

DisplayMathfftview1CursorFunction

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:MATHFFTView1:CURSor:FUNCtion command.

Description
  • This command sets or queries the cursor type for the specified Math-FFT view.
Usage
  • Using the .query() method will send the DISplay:MATHFFTView1:CURSor:FUNCtion? query.
  • Using the .verify(value) method will send the DISplay:MATHFFTView1:CURSor:FUNCtion? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:MATHFFTView1:CURSor:FUNCtion value command.
SCPI Syntax 
- DISplay:MATHFFTView1:CURSor:FUNCtion {WAVEform|VBArs|HBArs|SCREEN}
- DISplay:MATHFFTView1:CURSor:FUNCtion?
Info
  • 1 is the Math-FFT waveform number.
  • WAVEFORM specifies to display the paired vertical cursors in YT display format for measuring waveform amplitude and time. Measurements are taken at where the cursor intersects the waveform, and tracks waveform changes.
  • VBArs specifies vertical bar cursors, which measure in horizontal units.
  • HBArs specifies horizontal bar cursors, which measure in vertical units.
  • SCREEN specifies to display both horizontal and vertical bar cursors, which display the horizontal and vertical positions of the cursors, not waveform levels. Use these cursors to measure anywhere in the waveform display area.

DisplayMathfftview1CursorHbars

Bases: SCPICmdRead

The DISplay:MATHFFTView1:CURSor:HBArs command tree.

Usage
  • Using the .query() method will send the DISplay:MATHFFTView1:CURSor:HBArs? query.
  • Using the .verify(value) method will send the DISplay:MATHFFTView1:CURSor:HBArs? query and raise an AssertionError if the returned value does not match value.
Properties
  • .aposition: The DISplay:MATHFFTView1:CURSor:HBArs:APOSition command.
  • .aunits: The DISplay:MATHFFTView1:CURSor:HBArs:AUNIts command.
  • .bposition: The DISplay:MATHFFTView1:CURSor:HBArs:BPOSition command.
  • .bunits: The DISplay:MATHFFTView1:CURSor:HBArs:BUNIts command.
  • .delta: The DISplay:MATHFFTView1:CURSor:HBArs:DELTa command.

aposition property 

aposition: DisplayMathfftview1CursorHbarsAposition

Return the DISplay:MATHFFTView1:CURSor:HBArs:APOSition command.

Description
  • This command sets or returns the position of horizontal cursor A for the specified Math-FFT view.
Usage
  • Using the .query() method will send the DISplay:MATHFFTView1:CURSor:HBArs:APOSition? query.
  • Using the .verify(value) method will send the DISplay:MATHFFTView1:CURSor:HBArs:APOSition? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:MATHFFTView1:CURSor:HBArs:APOSition value command.
SCPI Syntax 
- DISplay:MATHFFTView1:CURSor:HBArs:APOSition <NR3>
- DISplay:MATHFFTView1:CURSor:HBArs:APOSition?
Info
  • 1 is the Math-FFT waveform number.
  • <NR3> is the cursor position of the specified cursor in the specified view.

aunits property 

aunits: DisplayMathfftview1CursorHbarsAunits

Return the DISplay:MATHFFTView1:CURSor:HBArs:AUNIts command.

Description
  • This command queries the vertical units of horizontal cursor A for the specified Math-FFT view.
Usage
  • Using the .query() method will send the DISplay:MATHFFTView1:CURSor:HBArs:AUNIts? query.
  • Using the .verify(value) method will send the DISplay:MATHFFTView1:CURSor:HBArs:AUNIts? query and raise an AssertionError if the returned value does not match value.
SCPI Syntax 
- DISplay:MATHFFTView1:CURSor:HBArs:AUNIts?
Info
  • 1 is the Math-FFT waveform number.

bposition property 

bposition: DisplayMathfftview1CursorHbarsBposition

Return the DISplay:MATHFFTView1:CURSor:HBArs:BPOSition command.

Description
  • This command sets or returns the position of horizontal cursor B for the specified Math-FFT view.
Usage
  • Using the .query() method will send the DISplay:MATHFFTView1:CURSor:HBArs:BPOSition? query.
  • Using the .verify(value) method will send the DISplay:MATHFFTView1:CURSor:HBArs:BPOSition? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:MATHFFTView1:CURSor:HBArs:BPOSition value command.
SCPI Syntax 
- DISplay:MATHFFTView1:CURSor:HBArs:BPOSition <NR3>
- DISplay:MATHFFTView1:CURSor:HBArs:BPOSition?
Info
  • 1 is the Math-FFT waveform number.
  • <NR3> is the vertical cursor B position for the specified Math-FFT view.

bunits property 

bunits: DisplayMathfftview1CursorHbarsBunits

Return the DISplay:MATHFFTView1:CURSor:HBArs:BUNIts command.

Description
  • This command queries the vertical units of horizontal cursor B for the specified Math-FFT view.
Usage
  • Using the .query() method will send the DISplay:MATHFFTView1:CURSor:HBArs:BUNIts? query.
  • Using the .verify(value) method will send the DISplay:MATHFFTView1:CURSor:HBArs:BUNIts? query and raise an AssertionError if the returned value does not match value.
SCPI Syntax 
- DISplay:MATHFFTView1:CURSor:HBArs:BUNIts?
Info
  • 1 is the Math-FFT waveform number.

delta property 

delta: DisplayMathfftview1CursorHbarsDelta

Return the DISplay:MATHFFTView1:CURSor:HBArs:DELTa command.

Description
  • This command queries the horizontal cursor’s delta value of the specified Math-FFT view.
Usage
  • Using the .query() method will send the DISplay:MATHFFTView1:CURSor:HBArs:DELTa? query.
  • Using the .verify(value) method will send the DISplay:MATHFFTView1:CURSor:HBArs:DELTa? query and raise an AssertionError if the returned value does not match value.
SCPI Syntax 
- DISplay:MATHFFTView1:CURSor:HBArs:DELTa?
Info
  • 1 is the Math-FFT waveform number.

DisplayMathfftview1CursorHbarsAposition

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:MATHFFTView1:CURSor:HBArs:APOSition command.

Description
  • This command sets or returns the position of horizontal cursor A for the specified Math-FFT view.
Usage
  • Using the .query() method will send the DISplay:MATHFFTView1:CURSor:HBArs:APOSition? query.
  • Using the .verify(value) method will send the DISplay:MATHFFTView1:CURSor:HBArs:APOSition? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:MATHFFTView1:CURSor:HBArs:APOSition value command.
SCPI Syntax 
- DISplay:MATHFFTView1:CURSor:HBArs:APOSition <NR3>
- DISplay:MATHFFTView1:CURSor:HBArs:APOSition?
Info
  • 1 is the Math-FFT waveform number.
  • <NR3> is the cursor position of the specified cursor in the specified view.

DisplayMathfftview1CursorHbarsAunits

Bases: SCPICmdRead

The DISplay:MATHFFTView1:CURSor:HBArs:AUNIts command.

Description
  • This command queries the vertical units of horizontal cursor A for the specified Math-FFT view.
Usage
  • Using the .query() method will send the DISplay:MATHFFTView1:CURSor:HBArs:AUNIts? query.
  • Using the .verify(value) method will send the DISplay:MATHFFTView1:CURSor:HBArs:AUNIts? query and raise an AssertionError if the returned value does not match value.
SCPI Syntax 
- DISplay:MATHFFTView1:CURSor:HBArs:AUNIts?
Info
  • 1 is the Math-FFT waveform number.

DisplayMathfftview1CursorHbarsBposition

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:MATHFFTView1:CURSor:HBArs:BPOSition command.

Description
  • This command sets or returns the position of horizontal cursor B for the specified Math-FFT view.
Usage
  • Using the .query() method will send the DISplay:MATHFFTView1:CURSor:HBArs:BPOSition? query.
  • Using the .verify(value) method will send the DISplay:MATHFFTView1:CURSor:HBArs:BPOSition? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:MATHFFTView1:CURSor:HBArs:BPOSition value command.
SCPI Syntax 
- DISplay:MATHFFTView1:CURSor:HBArs:BPOSition <NR3>
- DISplay:MATHFFTView1:CURSor:HBArs:BPOSition?
Info
  • 1 is the Math-FFT waveform number.
  • <NR3> is the vertical cursor B position for the specified Math-FFT view.

DisplayMathfftview1CursorHbarsBunits

Bases: SCPICmdRead

The DISplay:MATHFFTView1:CURSor:HBArs:BUNIts command.

Description
  • This command queries the vertical units of horizontal cursor B for the specified Math-FFT view.
Usage
  • Using the .query() method will send the DISplay:MATHFFTView1:CURSor:HBArs:BUNIts? query.
  • Using the .verify(value) method will send the DISplay:MATHFFTView1:CURSor:HBArs:BUNIts? query and raise an AssertionError if the returned value does not match value.
SCPI Syntax 
- DISplay:MATHFFTView1:CURSor:HBArs:BUNIts?
Info
  • 1 is the Math-FFT waveform number.

DisplayMathfftview1CursorHbarsDelta

Bases: SCPICmdRead

The DISplay:MATHFFTView1:CURSor:HBArs:DELTa command.

Description
  • This command queries the horizontal cursor’s delta value of the specified Math-FFT view.
Usage
  • Using the .query() method will send the DISplay:MATHFFTView1:CURSor:HBArs:DELTa? query.
  • Using the .verify(value) method will send the DISplay:MATHFFTView1:CURSor:HBArs:DELTa? query and raise an AssertionError if the returned value does not match value.
SCPI Syntax 
- DISplay:MATHFFTView1:CURSor:HBArs:DELTa?
Info
  • 1 is the Math-FFT waveform number.

DisplayMathfftview1CursorMode

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:MATHFFTView1:CURSor:MODe command.

Description
  • This command sets or queries the cursor tracking mode of the specified Math-FFT view.
Usage
  • Using the .query() method will send the DISplay:MATHFFTView1:CURSor:MODe? query.
  • Using the .verify(value) method will send the DISplay:MATHFFTView1:CURSor:MODe? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:MATHFFTView1:CURSor:MODe value command.
SCPI Syntax 
- DISplay:MATHFFTView1:CURSor:MODe {INDEPENDENT|TRACK}
- DISplay:MATHFFTView1:CURSor:MODe?
Info
  • 1 is the Math-FFT waveform number.
  • INDEPENDENT allows independent adjustment of the two cursors.
  • TRACK ties the navigational functionality of the two cursors together. For cursor 1 adjustments, this ties the movement of the two cursors together; however, cursor 2 continues to move independently of cursor 1.

DisplayMathfftview1CursorOneoverdeltatvalue

Bases: SCPICmdRead

The DISplay:MATHFFTView1:CURSor:ONEOVERDELTATVALUE command.

Description
  • This command queries the one over delta cursor readout value of the specified Math-FFT view.
Usage
  • Using the .query() method will send the DISplay:MATHFFTView1:CURSor:ONEOVERDELTATVALUE? query.
  • Using the .verify(value) method will send the DISplay:MATHFFTView1:CURSor:ONEOVERDELTATVALUE? query and raise an AssertionError if the returned value does not match value.
SCPI Syntax 
- DISplay:MATHFFTView1:CURSor:ONEOVERDELTATVALUE?
Info
  • 1 is the Math-FFT waveform number.

DisplayMathfftview1CursorRolocation

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:MATHFFTView1:CURSor:ROLOCATION command.

Description
  • This command sets or queries the location to display the specified Math FFT plot cursor readouts (in the plot graticule or in a badge in the Results Bar).
Usage
  • Using the .query() method will send the DISplay:MATHFFTView1:CURSor:ROLOCATION? query.
  • Using the .verify(value) method will send the DISplay:MATHFFTView1:CURSor:ROLOCATION? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:MATHFFTView1:CURSor:ROLOCATION value command.
SCPI Syntax 
- DISplay:MATHFFTView1:CURSor:ROLOCATION {GRATICULE|BADGE}
- DISplay:MATHFFTView1:CURSor:ROLOCATION?
Info
  • 1 is the Math FFT plot number.
  • GRATICULE sets the Math FFT plot cursor readouts to display as part of the cursors in the plot view.
  • BADGE removes the Math FFT plot cursor readouts from the cursors in the graticule and displays the cursor information as a badge in the Results Bar.

DisplayMathfftview1CursorScreen

Bases: SCPICmdRead

The DISplay:MATHFFTView1:CURSor:SCREEN command tree.

Usage
  • Using the .query() method will send the DISplay:MATHFFTView1:CURSor:SCREEN? query.
  • Using the .verify(value) method will send the DISplay:MATHFFTView1:CURSor:SCREEN? query and raise an AssertionError if the returned value does not match value.
Properties
  • .axposition: The DISplay:MATHFFTView1:CURSor:SCREEN:AXPOSition command.
  • .ayposition: The DISplay:MATHFFTView1:CURSor:SCREEN:AYPOSition command.
  • .bxposition: The DISplay:MATHFFTView1:CURSor:SCREEN:BXPOSition command.
  • .byposition: The DISplay:MATHFFTView1:CURSor:SCREEN:BYPOSition command.

axposition property 

axposition: DisplayMathfftview1CursorScreenAxposition

Return the DISplay:MATHFFTView1:CURSor:SCREEN:AXPOSition command.

Description
  • This command sets or returns the vertical cursor A x-axis waveform measurement position of the specified Math-FFT view.
Usage
  • Using the .query() method will send the DISplay:MATHFFTView1:CURSor:SCREEN:AXPOSition? query.
  • Using the .verify(value) method will send the DISplay:MATHFFTView1:CURSor:SCREEN:AXPOSition? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:MATHFFTView1:CURSor:SCREEN:AXPOSition value command.
SCPI Syntax 
- DISplay:MATHFFTView1:CURSor:SCREEN:AXPOSition <NR3>
- DISplay:MATHFFTView1:CURSor:SCREEN:AXPOSition?
Info
  • 1 is the Math-FFT waveform number.
  • <NR3> is the cursor position in MHz.

ayposition property 

ayposition: DisplayMathfftview1CursorScreenAyposition

Return the DISplay:MATHFFTView1:CURSor:SCREEN:AYPOSition command.

Description
  • This command sets or returns the vertical cursor A y-axis amplitude measurement value of the specified Math-FFT view.
Usage
  • Using the .query() method will send the DISplay:MATHFFTView1:CURSor:SCREEN:AYPOSition? query.
  • Using the .verify(value) method will send the DISplay:MATHFFTView1:CURSor:SCREEN:AYPOSition? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:MATHFFTView1:CURSor:SCREEN:AYPOSition value command.
SCPI Syntax 
- DISplay:MATHFFTView1:CURSor:SCREEN:AYPOSition <NR3>
- DISplay:MATHFFTView1:CURSor:SCREEN:AYPOSition?
Info
  • 1 is the Math-FFT waveform number.
  • <NR3> is the cursor A position of the specified cursor in the specified view.

bxposition property 

bxposition: DisplayMathfftview1CursorScreenBxposition

Return the DISplay:MATHFFTView1:CURSor:SCREEN:BXPOSition command.

Description
  • This command sets or returns the vertical cursor Bx-axis waveform time measurement position of the specified Math-FFT view.
Usage
  • Using the .query() method will send the DISplay:MATHFFTView1:CURSor:SCREEN:BXPOSition? query.
  • Using the .verify(value) method will send the DISplay:MATHFFTView1:CURSor:SCREEN:BXPOSition? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:MATHFFTView1:CURSor:SCREEN:BXPOSition value command.
SCPI Syntax 
- DISplay:MATHFFTView1:CURSor:SCREEN:BXPOSition <NR3>
- DISplay:MATHFFTView1:CURSor:SCREEN:BXPOSition?
Info
  • 1 is the Math-FFT waveform number.
  • <NR3> is the horizontal cursor B position of the specified cursor in the specified view.

byposition property 

byposition: DisplayMathfftview1CursorScreenByposition

Return the DISplay:MATHFFTView1:CURSor:SCREEN:BYPOSition command.

Description
  • This command sets or returns the vertical cursor B y-axis amplitude measurement value of the specified Math-FFT view.
Usage
  • Using the .query() method will send the DISplay:MATHFFTView1:CURSor:SCREEN:BYPOSition? query.
  • Using the .verify(value) method will send the DISplay:MATHFFTView1:CURSor:SCREEN:BYPOSition? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:MATHFFTView1:CURSor:SCREEN:BYPOSition value command.
SCPI Syntax 
- DISplay:MATHFFTView1:CURSor:SCREEN:BYPOSition <NR3>
- DISplay:MATHFFTView1:CURSor:SCREEN:BYPOSition?
Info
  • 1 is the Math-FFT waveform number.
  • <NR3> is the vertical cursor B position of the specified cursor in the specified view.

DisplayMathfftview1CursorScreenAxposition

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:MATHFFTView1:CURSor:SCREEN:AXPOSition command.

Description
  • This command sets or returns the vertical cursor A x-axis waveform measurement position of the specified Math-FFT view.
Usage
  • Using the .query() method will send the DISplay:MATHFFTView1:CURSor:SCREEN:AXPOSition? query.
  • Using the .verify(value) method will send the DISplay:MATHFFTView1:CURSor:SCREEN:AXPOSition? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:MATHFFTView1:CURSor:SCREEN:AXPOSition value command.
SCPI Syntax 
- DISplay:MATHFFTView1:CURSor:SCREEN:AXPOSition <NR3>
- DISplay:MATHFFTView1:CURSor:SCREEN:AXPOSition?
Info
  • 1 is the Math-FFT waveform number.
  • <NR3> is the cursor position in MHz.

DisplayMathfftview1CursorScreenAyposition

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:MATHFFTView1:CURSor:SCREEN:AYPOSition command.

Description
  • This command sets or returns the vertical cursor A y-axis amplitude measurement value of the specified Math-FFT view.
Usage
  • Using the .query() method will send the DISplay:MATHFFTView1:CURSor:SCREEN:AYPOSition? query.
  • Using the .verify(value) method will send the DISplay:MATHFFTView1:CURSor:SCREEN:AYPOSition? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:MATHFFTView1:CURSor:SCREEN:AYPOSition value command.
SCPI Syntax 
- DISplay:MATHFFTView1:CURSor:SCREEN:AYPOSition <NR3>
- DISplay:MATHFFTView1:CURSor:SCREEN:AYPOSition?
Info
  • 1 is the Math-FFT waveform number.
  • <NR3> is the cursor A position of the specified cursor in the specified view.

DisplayMathfftview1CursorScreenBxposition

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:MATHFFTView1:CURSor:SCREEN:BXPOSition command.

Description
  • This command sets or returns the vertical cursor Bx-axis waveform time measurement position of the specified Math-FFT view.
Usage
  • Using the .query() method will send the DISplay:MATHFFTView1:CURSor:SCREEN:BXPOSition? query.
  • Using the .verify(value) method will send the DISplay:MATHFFTView1:CURSor:SCREEN:BXPOSition? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:MATHFFTView1:CURSor:SCREEN:BXPOSition value command.
SCPI Syntax 
- DISplay:MATHFFTView1:CURSor:SCREEN:BXPOSition <NR3>
- DISplay:MATHFFTView1:CURSor:SCREEN:BXPOSition?
Info
  • 1 is the Math-FFT waveform number.
  • <NR3> is the horizontal cursor B position of the specified cursor in the specified view.

DisplayMathfftview1CursorScreenByposition

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:MATHFFTView1:CURSor:SCREEN:BYPOSition command.

Description
  • This command sets or returns the vertical cursor B y-axis amplitude measurement value of the specified Math-FFT view.
Usage
  • Using the .query() method will send the DISplay:MATHFFTView1:CURSor:SCREEN:BYPOSition? query.
  • Using the .verify(value) method will send the DISplay:MATHFFTView1:CURSor:SCREEN:BYPOSition? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:MATHFFTView1:CURSor:SCREEN:BYPOSition value command.
SCPI Syntax 
- DISplay:MATHFFTView1:CURSor:SCREEN:BYPOSition <NR3>
- DISplay:MATHFFTView1:CURSor:SCREEN:BYPOSition?
Info
  • 1 is the Math-FFT waveform number.
  • <NR3> is the vertical cursor B position of the specified cursor in the specified view.

DisplayMathfftview1CursorState

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:MATHFFTView1:CURSor:STATE command.

Description
  • This command sets or queries the visible state of cursors for the specified Math-FFT view.
Usage
  • Using the .query() method will send the DISplay:MATHFFTView1:CURSor:STATE? query.
  • Using the .verify(value) method will send the DISplay:MATHFFTView1:CURSor:STATE? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:MATHFFTView1:CURSor:STATE value command.
SCPI Syntax 
- DISplay:MATHFFTView1:CURSor:STATE {ON|OFF|<NR1>}
- DISplay:MATHFFTView1:CURSor:STATE?
Info
  • 1 is the Math-FFT waveform number.
  • ON enables the cursors.
  • 1 enables the cursors.
  • OFF disables the cursors.
  • 0 disables the cursors.
  • <NR1> = 0 turns off cursors; any other value displays cursors.

DisplayMathfftview1CursorVbars

Bases: SCPICmdRead

The DISplay:MATHFFTView1:CURSor:VBArs command tree.

Usage
  • Using the .query() method will send the DISplay:MATHFFTView1:CURSor:VBArs? query.
  • Using the .verify(value) method will send the DISplay:MATHFFTView1:CURSor:VBArs? query and raise an AssertionError if the returned value does not match value.
Properties
  • .aposition: The DISplay:MATHFFTView1:CURSor:VBArs:APOSition command.
  • .aunits: The DISplay:MATHFFTView1:CURSor:VBArs:AUNIts command.
  • .bposition: The DISplay:MATHFFTView1:CURSor:VBArs:BPOSition command.
  • .bunits: The DISplay:MATHFFTView1:CURSor:VBArs:BUNIts command.
  • .delta: The DISplay:MATHFFTView1:CURSor:VBArs:DELTa command.

aposition property 

aposition: DisplayMathfftview1CursorVbarsAposition

Return the DISplay:MATHFFTView1:CURSor:VBArs:APOSition command.

Description
  • This command sets or queries the horizontal cursor A position for the specified Math-FFT view.
Usage
  • Using the .query() method will send the DISplay:MATHFFTView1:CURSor:VBArs:APOSition? query.
  • Using the .verify(value) method will send the DISplay:MATHFFTView1:CURSor:VBArs:APOSition? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:MATHFFTView1:CURSor:VBArs:APOSition value command.
SCPI Syntax 
- DISplay:MATHFFTView1:CURSor:VBArs:APOSition <NR3>
- DISplay:MATHFFTView1:CURSor:VBArs:APOSition?
Info
  • 1 is the Math-FFT waveform number.
  • <NR3> sets the vertical cursor A position in the specified view.

aunits property 

aunits: DisplayMathfftview1CursorVbarsAunits

Return the DISplay:MATHFFTView1:CURSor:VBArs:AUNIts command.

Description
  • This command queries the vertical cursor A measurement units for the specified Math-FFT view.
Usage
  • Using the .query() method will send the DISplay:MATHFFTView1:CURSor:VBArs:AUNIts? query.
  • Using the .verify(value) method will send the DISplay:MATHFFTView1:CURSor:VBArs:AUNIts? query and raise an AssertionError if the returned value does not match value.
SCPI Syntax 
- DISplay:MATHFFTView1:CURSor:VBArs:AUNIts?
Info
  • 1 is the Math-FFT waveform number.

bposition property 

bposition: DisplayMathfftview1CursorVbarsBposition

Return the DISplay:MATHFFTView1:CURSor:VBArs:BPOSition command.

Description
  • This command sets or queries the vertical cursor B position for the specified Math-FFT view.
Usage
  • Using the .query() method will send the DISplay:MATHFFTView1:CURSor:VBArs:BPOSition? query.
  • Using the .verify(value) method will send the DISplay:MATHFFTView1:CURSor:VBArs:BPOSition? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:MATHFFTView1:CURSor:VBArs:BPOSition value command.
SCPI Syntax 
- DISplay:MATHFFTView1:CURSor:VBArs:BPOSition <NR3>
- DISplay:MATHFFTView1:CURSor:VBArs:BPOSition?
Info
  • 1 is the Math-FFT waveform number.
  • <NR3> sets the vertical cursor B position in the specified view.

bunits property 

bunits: DisplayMathfftview1CursorVbarsBunits

Return the DISplay:MATHFFTView1:CURSor:VBArs:BUNIts command.

Description
  • This command queries the vertical cursor B measurement units for the specified Math-FFT view.
Usage
  • Using the .query() method will send the DISplay:MATHFFTView1:CURSor:VBArs:BUNIts? query.
  • Using the .verify(value) method will send the DISplay:MATHFFTView1:CURSor:VBArs:BUNIts? query and raise an AssertionError if the returned value does not match value.
SCPI Syntax 
- DISplay:MATHFFTView1:CURSor:VBArs:BUNIts?
Info
  • 1 is the Math-FFT waveform number.

delta property 

delta: DisplayMathfftview1CursorVbarsDelta

Return the DISplay:MATHFFTView1:CURSor:VBArs:DELTa command.

Description
  • This command queries the vertical cursor’s delta T readout value for the specified Math-FFT view.
Usage
  • Using the .query() method will send the DISplay:MATHFFTView1:CURSor:VBArs:DELTa? query.
  • Using the .verify(value) method will send the DISplay:MATHFFTView1:CURSor:VBArs:DELTa? query and raise an AssertionError if the returned value does not match value.
SCPI Syntax 
- DISplay:MATHFFTView1:CURSor:VBArs:DELTa?
Info
  • 1 is the Math-FFT waveform number.

DisplayMathfftview1CursorVbarsAposition

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:MATHFFTView1:CURSor:VBArs:APOSition command.

Description
  • This command sets or queries the horizontal cursor A position for the specified Math-FFT view.
Usage
  • Using the .query() method will send the DISplay:MATHFFTView1:CURSor:VBArs:APOSition? query.
  • Using the .verify(value) method will send the DISplay:MATHFFTView1:CURSor:VBArs:APOSition? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:MATHFFTView1:CURSor:VBArs:APOSition value command.
SCPI Syntax 
- DISplay:MATHFFTView1:CURSor:VBArs:APOSition <NR3>
- DISplay:MATHFFTView1:CURSor:VBArs:APOSition?
Info
  • 1 is the Math-FFT waveform number.
  • <NR3> sets the vertical cursor A position in the specified view.

DisplayMathfftview1CursorVbarsAunits

Bases: SCPICmdRead

The DISplay:MATHFFTView1:CURSor:VBArs:AUNIts command.

Description
  • This command queries the vertical cursor A measurement units for the specified Math-FFT view.
Usage
  • Using the .query() method will send the DISplay:MATHFFTView1:CURSor:VBArs:AUNIts? query.
  • Using the .verify(value) method will send the DISplay:MATHFFTView1:CURSor:VBArs:AUNIts? query and raise an AssertionError if the returned value does not match value.
SCPI Syntax 
- DISplay:MATHFFTView1:CURSor:VBArs:AUNIts?
Info
  • 1 is the Math-FFT waveform number.

DisplayMathfftview1CursorVbarsBposition

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:MATHFFTView1:CURSor:VBArs:BPOSition command.

Description
  • This command sets or queries the vertical cursor B position for the specified Math-FFT view.
Usage
  • Using the .query() method will send the DISplay:MATHFFTView1:CURSor:VBArs:BPOSition? query.
  • Using the .verify(value) method will send the DISplay:MATHFFTView1:CURSor:VBArs:BPOSition? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:MATHFFTView1:CURSor:VBArs:BPOSition value command.
SCPI Syntax 
- DISplay:MATHFFTView1:CURSor:VBArs:BPOSition <NR3>
- DISplay:MATHFFTView1:CURSor:VBArs:BPOSition?
Info
  • 1 is the Math-FFT waveform number.
  • <NR3> sets the vertical cursor B position in the specified view.

DisplayMathfftview1CursorVbarsBunits

Bases: SCPICmdRead

The DISplay:MATHFFTView1:CURSor:VBArs:BUNIts command.

Description
  • This command queries the vertical cursor B measurement units for the specified Math-FFT view.
Usage
  • Using the .query() method will send the DISplay:MATHFFTView1:CURSor:VBArs:BUNIts? query.
  • Using the .verify(value) method will send the DISplay:MATHFFTView1:CURSor:VBArs:BUNIts? query and raise an AssertionError if the returned value does not match value.
SCPI Syntax 
- DISplay:MATHFFTView1:CURSor:VBArs:BUNIts?
Info
  • 1 is the Math-FFT waveform number.

DisplayMathfftview1CursorVbarsDelta

Bases: SCPICmdRead

The DISplay:MATHFFTView1:CURSor:VBArs:DELTa command.

Description
  • This command queries the vertical cursor’s delta T readout value for the specified Math-FFT view.
Usage
  • Using the .query() method will send the DISplay:MATHFFTView1:CURSor:VBArs:DELTa? query.
  • Using the .verify(value) method will send the DISplay:MATHFFTView1:CURSor:VBArs:DELTa? query and raise an AssertionError if the returned value does not match value.
SCPI Syntax 
- DISplay:MATHFFTView1:CURSor:VBArs:DELTa?
Info
  • 1 is the Math-FFT waveform number.

DisplayMathfftview1CursorWaveform

Bases: SCPICmdRead

The DISplay:MATHFFTView1:CURSor:WAVEform command tree.

Usage
  • Using the .query() method will send the DISplay:MATHFFTView1:CURSor:WAVEform? query.
  • Using the .verify(value) method will send the DISplay:MATHFFTView1:CURSor:WAVEform? query and raise an AssertionError if the returned value does not match value.
Properties
  • .aposition: The DISplay:MATHFFTView1:CURSor:WAVEform:APOSition command.
  • .bposition: The DISplay:MATHFFTView1:CURSor:WAVEform:BPOSition command.

aposition property 

aposition: DisplayMathfftview1CursorWaveformAposition

Return the DISplay:MATHFFTView1:CURSor:WAVEform:APOSition command.

Description
  • This command sets or queries the waveform cursor A position for the specified Math-FFT view.
Usage
  • Using the .query() method will send the DISplay:MATHFFTView1:CURSor:WAVEform:APOSition? query.
  • Using the .verify(value) method will send the DISplay:MATHFFTView1:CURSor:WAVEform:APOSition? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:MATHFFTView1:CURSor:WAVEform:APOSition value command.
SCPI Syntax 
- DISplay:MATHFFTView1:CURSor:WAVEform:APOSition <NR3>
- DISplay:MATHFFTView1:CURSor:WAVEform:APOSition?
Info
  • 1 is the Math-FFT waveform number.
  • <NR3> is the waveform cursor A position in the specified plot view.

bposition property 

bposition: DisplayMathfftview1CursorWaveformBposition

Return the DISplay:MATHFFTView1:CURSor:WAVEform:BPOSition command.

Description
  • This command sets or queries the waveform cursor B position for the specified Math-FFT view.
Usage
  • Using the .query() method will send the DISplay:MATHFFTView1:CURSor:WAVEform:BPOSition? query.
  • Using the .verify(value) method will send the DISplay:MATHFFTView1:CURSor:WAVEform:BPOSition? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:MATHFFTView1:CURSor:WAVEform:BPOSition value command.
SCPI Syntax 
- DISplay:MATHFFTView1:CURSor:WAVEform:BPOSition <NR3>
- DISplay:MATHFFTView1:CURSor:WAVEform:BPOSition?
Info
  • 1 is the Math-FFT waveform number.
  • <NR3> is the waveform cursor B position in the specified plot view.

DisplayMathfftview1CursorWaveformAposition

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:MATHFFTView1:CURSor:WAVEform:APOSition command.

Description
  • This command sets or queries the waveform cursor A position for the specified Math-FFT view.
Usage
  • Using the .query() method will send the DISplay:MATHFFTView1:CURSor:WAVEform:APOSition? query.
  • Using the .verify(value) method will send the DISplay:MATHFFTView1:CURSor:WAVEform:APOSition? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:MATHFFTView1:CURSor:WAVEform:APOSition value command.
SCPI Syntax 
- DISplay:MATHFFTView1:CURSor:WAVEform:APOSition <NR3>
- DISplay:MATHFFTView1:CURSor:WAVEform:APOSition?
Info
  • 1 is the Math-FFT waveform number.
  • <NR3> is the waveform cursor A position in the specified plot view.

DisplayMathfftview1CursorWaveformBposition

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:MATHFFTView1:CURSor:WAVEform:BPOSition command.

Description
  • This command sets or queries the waveform cursor B position for the specified Math-FFT view.
Usage
  • Using the .query() method will send the DISplay:MATHFFTView1:CURSor:WAVEform:BPOSition? query.
  • Using the .verify(value) method will send the DISplay:MATHFFTView1:CURSor:WAVEform:BPOSition? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:MATHFFTView1:CURSor:WAVEform:BPOSition value command.
SCPI Syntax 
- DISplay:MATHFFTView1:CURSor:WAVEform:BPOSition <NR3>
- DISplay:MATHFFTView1:CURSor:WAVEform:BPOSition?
Info
  • 1 is the Math-FFT waveform number.
  • <NR3> is the waveform cursor B position in the specified plot view.

DisplayMathfftview1Gridlines

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:MATHFFTView1:GRIDlines command.

Description
  • This command sets or queries the grid lines setting for the specified Math-FFT view.
Usage
  • Using the .query() method will send the DISplay:MATHFFTView1:GRIDlines? query.
  • Using the .verify(value) method will send the DISplay:MATHFFTView1:GRIDlines? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:MATHFFTView1:GRIDlines value command.
SCPI Syntax 
- DISplay:MATHFFTView1:GRIDlines {HORizontal|VERTical|BOTH}
- DISplay:MATHFFTView1:GRIDlines?
Info
  • 1 is the Math-FFT waveform number.
  • HORizontal specifies horizontal grid lines.
  • VERTical specifies vertical grid lines.
  • BOTH specifies both vertical and horizontal grid lines.

DisplayMathfftview1Math

Bases: SCPICmdRead

The DISplay:MATHFFTView1:MATH command tree.

Usage
  • Using the .query() method will send the DISplay:MATHFFTView1:MATH? query.
  • Using the .verify(value) method will send the DISplay:MATHFFTView1:MATH? query and raise an AssertionError if the returned value does not match value.
Properties
  • .math: The DISplay:MATHFFTView1:MATH:MATH<x> command tree.

math property 

math: dict[int, DisplayMathfftview1MathMathItem]

Return the DISplay:MATHFFTView1:MATH:MATH<x> command tree.

Usage
  • Using the .query() method will send the DISplay:MATHFFTView1:MATH:MATH<x>? query.
  • Using the .verify(value) method will send the DISplay:MATHFFTView1:MATH:MATH<x>? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .state: The DISplay:MATHFFTView1:MATH:MATH<x>:STATE command.

DisplayMathfftview1MathMathItem

Bases: ValidatedDynamicNumberCmd, SCPICmdRead

The DISplay:MATHFFTView1:MATH:MATH<x> command tree.

Usage
  • Using the .query() method will send the DISplay:MATHFFTView1:MATH:MATH<x>? query.
  • Using the .verify(value) method will send the DISplay:MATHFFTView1:MATH:MATH<x>? query and raise an AssertionError if the returned value does not match value.
Properties
  • .state: The DISplay:MATHFFTView1:MATH:MATH<x>:STATE command.

state property 

state: DisplayMathfftview1MathMathItemState

Return the DISplay:MATHFFTView1:MATH:MATH<x>:STATE command.

Description
  • This command sets or queries the display state of the specified math waveform for the specified Math-FFT view.
Usage
  • Using the .query() method will send the DISplay:MATHFFTView1:MATH:MATH<x>:STATE? query.
  • Using the .verify(value) method will send the DISplay:MATHFFTView1:MATH:MATH<x>:STATE? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:MATHFFTView1:MATH:MATH<x>:STATE value command.
SCPI Syntax 
- DISplay:MATHFFTView1:MATH:MATH<x>:STATE {ON|OFF|<NR1>}
- DISplay:MATHFFTView1:MATH:MATH<x>:STATE?
Info
  • 1 is the Math-FFT waveform number.
  • OFF disables displaying the specified Math-FFT view.
  • ON enables displaying the specified Math-FFT view.
  • <NR1> = 0 disables the specified Math-FFT view; any other value enables the specified Math-FFT view.

DisplayMathfftview1MathMathItemState

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:MATHFFTView1:MATH:MATH<x>:STATE command.

Description
  • This command sets or queries the display state of the specified math waveform for the specified Math-FFT view.
Usage
  • Using the .query() method will send the DISplay:MATHFFTView1:MATH:MATH<x>:STATE? query.
  • Using the .verify(value) method will send the DISplay:MATHFFTView1:MATH:MATH<x>:STATE? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:MATHFFTView1:MATH:MATH<x>:STATE value command.
SCPI Syntax 
- DISplay:MATHFFTView1:MATH:MATH<x>:STATE {ON|OFF|<NR1>}
- DISplay:MATHFFTView1:MATH:MATH<x>:STATE?
Info
  • 1 is the Math-FFT waveform number.
  • OFF disables displaying the specified Math-FFT view.
  • ON enables displaying the specified Math-FFT view.
  • <NR1> = 0 disables the specified Math-FFT view; any other value enables the specified Math-FFT view.

DisplayMathfftview1Xaxis

Bases: SCPICmdRead

The DISplay:MATHFFTView1:XAXIS command tree.

Usage
  • Using the .query() method will send the DISplay:MATHFFTView1:XAXIS? query.
  • Using the .verify(value) method will send the DISplay:MATHFFTView1:XAXIS? query and raise an AssertionError if the returned value does not match value.
Properties
  • .scale: The DISplay:MATHFFTView1:XAXIS:SCALE command.

scale property 

scale: DisplayMathfftview1XaxisScale

Return the DISplay:MATHFFTView1:XAXIS:SCALE command.

Description
  • This command sets or queries the x-axis scale (Linear or Log) for the specified Math-FFT view.
Usage
  • Using the .query() method will send the DISplay:MATHFFTView1:XAXIS:SCALE? query.
  • Using the .verify(value) method will send the DISplay:MATHFFTView1:XAXIS:SCALE? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:MATHFFTView1:XAXIS:SCALE value command.
SCPI Syntax 
- DISplay:MATHFFTView1:XAXIS:SCALE {LINEAr|LOG}
- DISplay:MATHFFTView1:XAXIS:SCALE?
Info
  • 1 is the Math-FFT waveform number.
  • LINEAr specifies a linear scale.
  • LOG specifies a logarithmic scale.

DisplayMathfftview1XaxisScale

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:MATHFFTView1:XAXIS:SCALE command.

Description
  • This command sets or queries the x-axis scale (Linear or Log) for the specified Math-FFT view.
Usage
  • Using the .query() method will send the DISplay:MATHFFTView1:XAXIS:SCALE? query.
  • Using the .verify(value) method will send the DISplay:MATHFFTView1:XAXIS:SCALE? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:MATHFFTView1:XAXIS:SCALE value command.
SCPI Syntax 
- DISplay:MATHFFTView1:XAXIS:SCALE {LINEAr|LOG}
- DISplay:MATHFFTView1:XAXIS:SCALE?
Info
  • 1 is the Math-FFT waveform number.
  • LINEAr specifies a linear scale.
  • LOG specifies a logarithmic scale.

DisplayMathfftview1Yaxis

Bases: SCPICmdRead

The DISplay:MATHFFTView1:YAXIS command tree.

Usage
  • Using the .query() method will send the DISplay:MATHFFTView1:YAXIS? query.
  • Using the .verify(value) method will send the DISplay:MATHFFTView1:YAXIS? query and raise an AssertionError if the returned value does not match value.
Properties
  • .scale: The DISplay:MATHFFTView1:YAXIS:SCALE command.

scale property 

scale: DisplayMathfftview1YaxisScale

Return the DISplay:MATHFFTView1:YAXIS:SCALE command.

Description
  • This command sets or queries the vertical scale setting (Linear or dBm) for the specified Math-FFT view.
Usage
  • Using the .query() method will send the DISplay:MATHFFTView1:YAXIS:SCALE? query.
  • Using the .verify(value) method will send the DISplay:MATHFFTView1:YAXIS:SCALE? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:MATHFFTView1:YAXIS:SCALE value command.
SCPI Syntax 
- DISplay:MATHFFTView1:YAXIS:SCALE {LINEAr|DBM}
- DISplay:MATHFFTView1:YAXIS:SCALE?
Info
  • 1 is the Math-FFT waveform number.
  • LINEAr specifies a linear scale.
  • DBM specifies a dBm scale.

DisplayMathfftview1YaxisScale

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:MATHFFTView1:YAXIS:SCALE command.

Description
  • This command sets or queries the vertical scale setting (Linear or dBm) for the specified Math-FFT view.
Usage
  • Using the .query() method will send the DISplay:MATHFFTView1:YAXIS:SCALE? query.
  • Using the .verify(value) method will send the DISplay:MATHFFTView1:YAXIS:SCALE? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:MATHFFTView1:YAXIS:SCALE value command.
SCPI Syntax 
- DISplay:MATHFFTView1:YAXIS:SCALE {LINEAr|DBM}
- DISplay:MATHFFTView1:YAXIS:SCALE?
Info
  • 1 is the Math-FFT waveform number.
  • LINEAr specifies a linear scale.
  • DBM specifies a dBm scale.

DisplayMathfftview1Zoom

Bases: SCPICmdRead

The DISplay:MATHFFTView1:ZOOM command tree.

Usage
  • Using the .query() method will send the DISplay:MATHFFTView1:ZOOM? query.
  • Using the .verify(value) method will send the DISplay:MATHFFTView1:ZOOM? query and raise an AssertionError if the returned value does not match value.
Properties
  • .xaxis: The DISplay:MATHFFTView1:ZOOM:XAXIS command tree.
  • .yaxis: The DISplay:MATHFFTView1:ZOOM:YAXIS command tree.

xaxis property 

xaxis: DisplayMathfftview1ZoomXaxis

Return the DISplay:MATHFFTView1:ZOOM:XAXIS command tree.

Usage
  • Using the .query() method will send the DISplay:MATHFFTView1:ZOOM:XAXIS? query.
  • Using the .verify(value) method will send the DISplay:MATHFFTView1:ZOOM:XAXIS? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .from: The DISplay:MATHFFTView1:ZOOM:XAXIS:FROM command.
  • .to: The DISplay:MATHFFTView1:ZOOM:XAXIS:TO command.

yaxis property 

yaxis: DisplayMathfftview1ZoomYaxis

Return the DISplay:MATHFFTView1:ZOOM:YAXIS command tree.

Usage
  • Using the .query() method will send the DISplay:MATHFFTView1:ZOOM:YAXIS? query.
  • Using the .verify(value) method will send the DISplay:MATHFFTView1:ZOOM:YAXIS? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .from: The DISplay:MATHFFTView1:ZOOM:YAXIS:FROM command.
  • .to: The DISplay:MATHFFTView1:ZOOM:YAXIS:TO command.

DisplayMathfftview1ZoomXaxis

Bases: SCPICmdRead

The DISplay:MATHFFTView1:ZOOM:XAXIS command tree.

Usage
  • Using the .query() method will send the DISplay:MATHFFTView1:ZOOM:XAXIS? query.
  • Using the .verify(value) method will send the DISplay:MATHFFTView1:ZOOM:XAXIS? query and raise an AssertionError if the returned value does not match value.
Properties
  • .from: The DISplay:MATHFFTView1:ZOOM:XAXIS:FROM command.
  • .to: The DISplay:MATHFFTView1:ZOOM:XAXIS:TO command.

from_ property 

from_: DisplayMathfftview1ZoomXaxisFrom

Return the DISplay:MATHFFTView1:ZOOM:XAXIS:FROM command.

Description
  • This command sets or queries the value of the left edge of the zoom area for the specified Math-FFT view.
Usage
  • Using the .query() method will send the DISplay:MATHFFTView1:ZOOM:XAXIS:FROM? query.
  • Using the .verify(value) method will send the DISplay:MATHFFTView1:ZOOM:XAXIS:FROM? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:MATHFFTView1:ZOOM:XAXIS:FROM value command.
SCPI Syntax 
- DISplay:MATHFFTView1:ZOOM:XAXIS:FROM <NR3>
- DISplay:MATHFFTView1:ZOOM:XAXIS:FROM?
Info
  • 1 is the Math-FFT waveform number.
  • <NR3> is the value of the left edge of the zoom x axis in the specified plot view.

to property 

to: DisplayMathfftview1ZoomXaxisTo

Return the DISplay:MATHFFTView1:ZOOM:XAXIS:TO command.

Description
  • This command sets or queries the value of the right edge value of the zoom area for the specified Math-FFT view.
Usage
  • Using the .write(value) method will send the DISplay:MATHFFTView1:ZOOM:XAXIS:TO value command.
SCPI Syntax 
- DISplay:MATHFFTView1:ZOOM:XAXIS:TO <NR3>
Info
  • 1 is the Math-FFT waveform number.
  • <NR3> is the value of the right edge of the zoom x axis in the specified plot view.

DisplayMathfftview1ZoomXaxisFrom

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:MATHFFTView1:ZOOM:XAXIS:FROM command.

Description
  • This command sets or queries the value of the left edge of the zoom area for the specified Math-FFT view.
Usage
  • Using the .query() method will send the DISplay:MATHFFTView1:ZOOM:XAXIS:FROM? query.
  • Using the .verify(value) method will send the DISplay:MATHFFTView1:ZOOM:XAXIS:FROM? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:MATHFFTView1:ZOOM:XAXIS:FROM value command.
SCPI Syntax 
- DISplay:MATHFFTView1:ZOOM:XAXIS:FROM <NR3>
- DISplay:MATHFFTView1:ZOOM:XAXIS:FROM?
Info
  • 1 is the Math-FFT waveform number.
  • <NR3> is the value of the left edge of the zoom x axis in the specified plot view.

DisplayMathfftview1ZoomXaxisTo

Bases: SCPICmdWrite

The DISplay:MATHFFTView1:ZOOM:XAXIS:TO command.

Description
  • This command sets or queries the value of the right edge value of the zoom area for the specified Math-FFT view.
Usage
  • Using the .write(value) method will send the DISplay:MATHFFTView1:ZOOM:XAXIS:TO value command.
SCPI Syntax 
- DISplay:MATHFFTView1:ZOOM:XAXIS:TO <NR3>
Info
  • 1 is the Math-FFT waveform number.
  • <NR3> is the value of the right edge of the zoom x axis in the specified plot view.

DisplayMathfftview1ZoomYaxis

Bases: SCPICmdRead

The DISplay:MATHFFTView1:ZOOM:YAXIS command tree.

Usage
  • Using the .query() method will send the DISplay:MATHFFTView1:ZOOM:YAXIS? query.
  • Using the .verify(value) method will send the DISplay:MATHFFTView1:ZOOM:YAXIS? query and raise an AssertionError if the returned value does not match value.
Properties
  • .from: The DISplay:MATHFFTView1:ZOOM:YAXIS:FROM command.
  • .to: The DISplay:MATHFFTView1:ZOOM:YAXIS:TO command.

from_ property 

from_: DisplayMathfftview1ZoomYaxisFrom

Return the DISplay:MATHFFTView1:ZOOM:YAXIS:FROM command.

Description
  • This command sets or queries the bottom edge value of the zoom y-axis area for the specified Math-FFT view.
Usage
  • Using the .query() method will send the DISplay:MATHFFTView1:ZOOM:YAXIS:FROM? query.
  • Using the .verify(value) method will send the DISplay:MATHFFTView1:ZOOM:YAXIS:FROM? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:MATHFFTView1:ZOOM:YAXIS:FROM value command.
SCPI Syntax 
- DISplay:MATHFFTView1:ZOOM:YAXIS:FROM <NR3>
- DISplay:MATHFFTView1:ZOOM:YAXIS:FROM?
Info
  • 1 is the Math-FFT waveform number.
  • <NR3> is the bottom value of the zoom y axis in the specified plot view.

to property 

to: DisplayMathfftview1ZoomYaxisTo

Return the DISplay:MATHFFTView1:ZOOM:YAXIS:TO command.

Description
  • This command sets or queries the top edge value of the zoom y-axis area for the specified Math-FFT view.
Usage
  • Using the .query() method will send the DISplay:MATHFFTView1:ZOOM:YAXIS:TO? query.
  • Using the .verify(value) method will send the DISplay:MATHFFTView1:ZOOM:YAXIS:TO? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:MATHFFTView1:ZOOM:YAXIS:TO value command.
SCPI Syntax 
- DISplay:MATHFFTView1:ZOOM:YAXIS:TO <NR3>
- DISplay:MATHFFTView1:ZOOM:YAXIS:TO?
Info
  • 1 is the Math-FFT waveform number.
  • <NR3> is the top value of the zoom y axis in the specified plot view.

DisplayMathfftview1ZoomYaxisFrom

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:MATHFFTView1:ZOOM:YAXIS:FROM command.

Description
  • This command sets or queries the bottom edge value of the zoom y-axis area for the specified Math-FFT view.
Usage
  • Using the .query() method will send the DISplay:MATHFFTView1:ZOOM:YAXIS:FROM? query.
  • Using the .verify(value) method will send the DISplay:MATHFFTView1:ZOOM:YAXIS:FROM? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:MATHFFTView1:ZOOM:YAXIS:FROM value command.
SCPI Syntax 
- DISplay:MATHFFTView1:ZOOM:YAXIS:FROM <NR3>
- DISplay:MATHFFTView1:ZOOM:YAXIS:FROM?
Info
  • 1 is the Math-FFT waveform number.
  • <NR3> is the bottom value of the zoom y axis in the specified plot view.

DisplayMathfftview1ZoomYaxisTo

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:MATHFFTView1:ZOOM:YAXIS:TO command.

Description
  • This command sets or queries the top edge value of the zoom y-axis area for the specified Math-FFT view.
Usage
  • Using the .query() method will send the DISplay:MATHFFTView1:ZOOM:YAXIS:TO? query.
  • Using the .verify(value) method will send the DISplay:MATHFFTView1:ZOOM:YAXIS:TO? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:MATHFFTView1:ZOOM:YAXIS:TO value command.
SCPI Syntax 
- DISplay:MATHFFTView1:ZOOM:YAXIS:TO <NR3>
- DISplay:MATHFFTView1:ZOOM:YAXIS:TO?
Info
  • 1 is the Math-FFT waveform number.
  • <NR3> is the top value of the zoom y axis in the specified plot view.

DisplayPersistence

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:PERSistence command.

Description
  • This command sets or queries the display persistence for analog waveforms. Persistence is valid for wave views only.
Usage
  • Using the .query() method will send the DISplay:PERSistence? query.
  • Using the .verify(value) method will send the DISplay:PERSistence? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:PERSistence value command.
SCPI Syntax 
- DISplay:PERSistence {OFF|AUTO|INFPersist|INFInite|VARpersist|CLEAR}
- DISplay:PERSistence?
Info
  • OFF disables the persistence aspect of the display.
  • AUTO automatically set the persistence.
  • INFPersist sets a display mode where any pixels, once touched by samples, remain set until cleared by a mode change.
  • INFInite sets a display mode where any pixels, once touched by samples, remain set until cleared by a mode change.
  • VARPersist sets a display mode where set pixels are gradually dimmed.
  • CLEAR resets the persist time count down and clears the display of acquired points.
Properties
  • .reset: The DISplay:PERSistence:RESET command.

reset property 

reset: DisplayPersistenceReset

Return the DISplay:PERSistence:RESET command.

Description
  • This command controls the clearing of persistence data that has been built up over time. Persistence is valid for wave views only.
Usage
  • Using the .write() method will send the DISplay:PERSistence:RESET command.
SCPI Syntax 
- DISplay:PERSistence:RESET

DisplayPersistenceReset

Bases: SCPICmdWriteNoArguments

The DISplay:PERSistence:RESET command.

Description
  • This command controls the clearing of persistence data that has been built up over time. Persistence is valid for wave views only.
Usage
  • Using the .write() method will send the DISplay:PERSistence:RESET command.
SCPI Syntax 
- DISplay:PERSistence:RESET

DisplayPlotview1

Bases: SCPICmdRead

The DISplay:PLOTView1 command tree.

Usage
  • Using the .query() method will send the DISplay:PLOTView1? query.
  • Using the .verify(value) method will send the DISplay:PLOTView1? query and raise an AssertionError if the returned value does not match value.
Properties
  • .cursor: The DISplay:PLOTView1:CURSor command tree.
  • .autoscale: The DISplay:PLOTView1:AUTOScale command.
  • .gridlines: The DISplay:PLOTView1:GRIDlines command.
  • .zoom: The DISplay:PLOTView1:ZOOM command tree.

autoscale property 

autoscale: DisplayPlotview1Autoscale

Return the DISplay:PLOTView1:AUTOScale command.

Description
  • This command sets or queries the enabled state of autoscale for the specified plot.
Usage
  • Using the .query() method will send the DISplay:PLOTView1:AUTOScale? query.
  • Using the .verify(value) method will send the DISplay:PLOTView1:AUTOScale? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:PLOTView1:AUTOScale value command.
SCPI Syntax 
- DISplay:PLOTView1:AUTOScale {ON|OFF|<NR1>}
- DISplay:PLOTView1:AUTOScale?
Info
  • 1 is the Plot waveform number.
  • OFF disables the autoscale feature.
  • ON enables the autoscale feature.
  • <NR1> = 0 disables the autoscale feature; any other value enables the autoscale feature.

cursor property 

cursor: DisplayPlotview1Cursor

Return the DISplay:PLOTView1:CURSor command tree.

Usage
  • Using the .query() method will send the DISplay:PLOTView1:CURSor? query.
  • Using the .verify(value) method will send the DISplay:PLOTView1:CURSor? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .rolocation: The DISplay:PLOTView1:CURSor:ROLOCATION command.
  • .asource: The DISplay:PLOTView1:CURSor:ASOUrce command.
  • .bsource: The DISplay:PLOTView1:CURSor:BSOUrce command.
  • .ddt: The DISplay:PLOTView1:CURSor:DDT command.
  • .function: The DISplay:PLOTView1:CURSor:FUNCtion command.
  • .hbars: The DISplay:PLOTView1:CURSor:HBArs command tree.
  • .mode: The DISplay:PLOTView1:CURSor:MODe command.
  • .oneoverdeltatvalue: The DISplay:PLOTView1:CURSor:ONEOVERDELTATVALUE command.
  • .screen: The DISplay:PLOTView1:CURSor:SCREEN command tree.
  • .splitmode: The DISplay:PLOTView1:CURSor:SPLITMODE command.
  • .state: The DISplay:PLOTView1:CURSor:STATE command.
  • .vbars: The DISplay:PLOTView1:CURSor:VBArs command tree.
  • .waveform: The DISplay:PLOTView1:CURSor:WAVEform command tree.

gridlines property 

gridlines: DisplayPlotview1Gridlines

Return the DISplay:PLOTView1:GRIDlines command.

Description
  • This command sets or queries the Grid (graticule) lines setting of the specified plot. This command works for plots that have vertical and horizontal units associated with the graticule. For example, this command does not work for XY or XYZ plots.
Usage
  • Using the .query() method will send the DISplay:PLOTView1:GRIDlines? query.
  • Using the .verify(value) method will send the DISplay:PLOTView1:GRIDlines? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:PLOTView1:GRIDlines value command.
SCPI Syntax 
- DISplay:PLOTView1:GRIDlines {HORizontal|VERTical|BOTH}
- DISplay:PLOTView1:GRIDlines?
Info
  • 1 is the Plot waveform number.
  • HORizontal specifies horizontal grid lines.
  • VERTical specifies vertical grid lines.
  • BOTH specifies both vertical and horizontal grid lines.

zoom property 

zoom: DisplayPlotview1Zoom

Return the DISplay:PLOTView1:ZOOM command tree.

Usage
  • Using the .query() method will send the DISplay:PLOTView1:ZOOM? query.
  • Using the .verify(value) method will send the DISplay:PLOTView1:ZOOM? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .xaxis: The DISplay:PLOTView1:ZOOM:XAXIS command tree.
  • .yaxis: The DISplay:PLOTView1:ZOOM:YAXIS command tree.

DisplayPlotview1Autoscale

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:PLOTView1:AUTOScale command.

Description
  • This command sets or queries the enabled state of autoscale for the specified plot.
Usage
  • Using the .query() method will send the DISplay:PLOTView1:AUTOScale? query.
  • Using the .verify(value) method will send the DISplay:PLOTView1:AUTOScale? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:PLOTView1:AUTOScale value command.
SCPI Syntax 
- DISplay:PLOTView1:AUTOScale {ON|OFF|<NR1>}
- DISplay:PLOTView1:AUTOScale?
Info
  • 1 is the Plot waveform number.
  • OFF disables the autoscale feature.
  • ON enables the autoscale feature.
  • <NR1> = 0 disables the autoscale feature; any other value enables the autoscale feature.

DisplayPlotview1Cursor

Bases: SCPICmdRead

The DISplay:PLOTView1:CURSor command tree.

Usage
  • Using the .query() method will send the DISplay:PLOTView1:CURSor? query.
  • Using the .verify(value) method will send the DISplay:PLOTView1:CURSor? query and raise an AssertionError if the returned value does not match value.
Properties
  • .rolocation: The DISplay:PLOTView1:CURSor:ROLOCATION command.
  • .asource: The DISplay:PLOTView1:CURSor:ASOUrce command.
  • .bsource: The DISplay:PLOTView1:CURSor:BSOUrce command.
  • .ddt: The DISplay:PLOTView1:CURSor:DDT command.
  • .function: The DISplay:PLOTView1:CURSor:FUNCtion command.
  • .hbars: The DISplay:PLOTView1:CURSor:HBArs command tree.
  • .mode: The DISplay:PLOTView1:CURSor:MODe command.
  • .oneoverdeltatvalue: The DISplay:PLOTView1:CURSor:ONEOVERDELTATVALUE command.
  • .screen: The DISplay:PLOTView1:CURSor:SCREEN command tree.
  • .splitmode: The DISplay:PLOTView1:CURSor:SPLITMODE command.
  • .state: The DISplay:PLOTView1:CURSor:STATE command.
  • .vbars: The DISplay:PLOTView1:CURSor:VBArs command tree.
  • .waveform: The DISplay:PLOTView1:CURSor:WAVEform command tree.

asource property 

asource: DisplayPlotview1CursorAsource

Return the DISplay:PLOTView1:CURSor:ASOUrce command.

Description
  • This command queries the cursor source for plot cursor A.
Usage
  • Using the .query() method will send the DISplay:PLOTView1:CURSor:ASOUrce? query.
  • Using the .verify(value) method will send the DISplay:PLOTView1:CURSor:ASOUrce? query and raise an AssertionError if the returned value does not match value.
SCPI Syntax 
- DISplay:PLOTView1:CURSor:ASOUrce?
Info
  • 1 is the Plot waveform number.

bsource property 

bsource: DisplayPlotview1CursorBsource

Return the DISplay:PLOTView1:CURSor:BSOUrce command.

Description
  • This command queries the cursor source for plot cursor B.
Usage
  • Using the .query() method will send the DISplay:PLOTView1:CURSor:BSOUrce? query.
  • Using the .verify(value) method will send the DISplay:PLOTView1:CURSor:BSOUrce? query and raise an AssertionError if the returned value does not match value.
SCPI Syntax 
- DISplay:PLOTView1:CURSor:BSOUrce?
Info
  • 1 is the Plot waveform number.

ddt property 

ddt: DisplayPlotview1CursorDdt

Return the DISplay:PLOTView1:CURSor:DDT command.

Description
  • This command returns the delta V over delta T cursor readout value for the specified Plot view.
Usage
  • Using the .query() method will send the DISplay:PLOTView1:CURSor:DDT? query.
  • Using the .verify(value) method will send the DISplay:PLOTView1:CURSor:DDT? query and raise an AssertionError if the returned value does not match value.
SCPI Syntax 
- DISplay:PLOTView1:CURSor:DDT?
Info
  • PlotView<x> is the Plot waveform number.

function property 

function: DisplayPlotview1CursorFunction

Return the DISplay:PLOTView1:CURSor:FUNCtion command.

Description
  • This command sets or queries the cursor mode for the specified Plot view.
Usage
  • Using the .query() method will send the DISplay:PLOTView1:CURSor:FUNCtion? query.
  • Using the .verify(value) method will send the DISplay:PLOTView1:CURSor:FUNCtion? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:PLOTView1:CURSor:FUNCtion value command.
SCPI Syntax 
- DISplay:PLOTView1:CURSor:FUNCtion {WAVEFORM|VBArs|HBArs|SCREEN}
- DISplay:PLOTView1:CURSor:FUNCtion?
Info
  • 1 is the Plot waveform number.
  • WAVEFORM specifies to display the paired cursors in YT display format for measuring waveform amplitude and time.
  • VBArs specifies vertical bar cursors, which measure in horizontal units.
  • HBArs specifies horizontal bar cursors, which measure in vertical units.
  • SCREEN specifies to display both horizontal and vertical bar cursors, which measure the selected waveform in horizontal and vertical units. Use these cursors to measure anywhere in the waveform display area.

hbars property 

hbars: DisplayPlotview1CursorHbars

Return the DISplay:PLOTView1:CURSor:HBArs command tree.

Usage
  • Using the .query() method will send the DISplay:PLOTView1:CURSor:HBArs? query.
  • Using the .verify(value) method will send the DISplay:PLOTView1:CURSor:HBArs? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .aposition: The DISplay:PLOTView1:CURSor:HBArs:APOSition command.
  • .aunits: The DISplay:PLOTView1:CURSor:HBArs:AUNIts command.
  • .bposition: The DISplay:PLOTView1:CURSor:HBArs:BPOSition command.
  • .bunits: The DISplay:PLOTView1:CURSor:HBArs:BUNIts command.
  • .delta: The DISplay:PLOTView1:CURSor:HBArs:DELTa command.

mode property 

mode: DisplayPlotview1CursorMode

Return the DISplay:PLOTView1:CURSor:MODe command.

Description
  • This command sets or queries the cursor tracking mode for the specified Plot view.
Usage
  • Using the .query() method will send the DISplay:PLOTView1:CURSor:MODe? query.
  • Using the .verify(value) method will send the DISplay:PLOTView1:CURSor:MODe? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:PLOTView1:CURSor:MODe value command.
SCPI Syntax 
- DISplay:PLOTView1:CURSor:MODe {INDEPENDENT|TRACK}
- DISplay:PLOTView1:CURSor:MODe?
Info
  • 1 is the Plot waveform number.
  • INDEPENDENT allows independent adjustment of the two cursors.
  • TRACK ties the navigational functionality of the two cursors together. For cursor A adjustments, this ties the movement of the two cursors together; however, cursor B continues to move independently of cursor A.

oneoverdeltatvalue property 

oneoverdeltatvalue: DisplayPlotview1CursorOneoverdeltatvalue

Return the DISplay:PLOTView1:CURSor:ONEOVERDELTATVALUE command.

Description
  • This command sets or queries the one over delta T cursor readout value for the specified Plot view.
Usage
  • Using the .query() method will send the DISplay:PLOTView1:CURSor:ONEOVERDELTATVALUE? query.
  • Using the .verify(value) method will send the DISplay:PLOTView1:CURSor:ONEOVERDELTATVALUE? query and raise an AssertionError if the returned value does not match value.
SCPI Syntax 
- DISplay:PLOTView1:CURSor:ONEOVERDELTATVALUE?
Info
  • 1 is the Plot waveform number.

rolocation property 

rolocation: DisplayPlotview1CursorRolocation

Return the DISplay:PLOTView1:CURSor:ROLOCATION command.

Description
  • This command sets or queries the location to display the specified plot cursor readouts (in the plot graticule or in a badge in the Results Bar).
Usage
  • Using the .query() method will send the DISplay:PLOTView1:CURSor:ROLOCATION? query.
  • Using the .verify(value) method will send the DISplay:PLOTView1:CURSor:ROLOCATION? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:PLOTView1:CURSor:ROLOCATION value command.
SCPI Syntax 
- DISplay:PLOTView1:CURSor:ROLOCATION {GRATICULE|BADGE}
- DISplay:PLOTView1:CURSor:ROLOCATION?
Info
  • 1 is the waveform plot number.
  • GRATICULE sets the plot cursor readouts to display as part of the cursors in the plot view.
  • BADGE removes the plot cursor readouts from the cursors in the graticule and displays the cursor information as a badge in the Results Bar.

screen property 

screen: DisplayPlotview1CursorScreen

Return the DISplay:PLOTView1:CURSor:SCREEN command tree.

Usage
  • Using the .query() method will send the DISplay:PLOTView1:CURSor:SCREEN? query.
  • Using the .verify(value) method will send the DISplay:PLOTView1:CURSor:SCREEN? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .axposition: The DISplay:PLOTView1:CURSor:SCREEN:AXPOSition command.
  • .ayposition: The DISplay:PLOTView1:CURSor:SCREEN:AYPOSition command.
  • .bxposition: The DISplay:PLOTView1:CURSor:SCREEN:BXPOSition command.
  • .byposition: The DISplay:PLOTView1:CURSor:SCREEN:BYPOSition command.

splitmode property 

splitmode: DisplayPlotview1CursorSplitmode

Return the DISplay:PLOTView1:CURSor:SPLITMODE command.

Description
  • This command sets or queries the cursor source mode in the specified view.
Usage
  • Using the .query() method will send the DISplay:PLOTView1:CURSor:SPLITMODE? query.
  • Using the .verify(value) method will send the DISplay:PLOTView1:CURSor:SPLITMODE? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:PLOTView1:CURSor:SPLITMODE value command.
SCPI Syntax 
- DISplay:PLOTView1:CURSor:SPLITMODE {SAME|SPLIT}
- DISplay:PLOTView1:CURSor:SPLITMODE?
Info
  • 1 is the Plot waveform number.
  • SAME specifies that both cursors are on the same waveform.
  • SPLIT specifies that the cursors can be on different waveforms.

state property 

state: DisplayPlotview1CursorState

Return the DISplay:PLOTView1:CURSor:STATE command.

Description
  • This command sets or queries the visible state of the cursor of the specified cursor in the specified view.
Usage
  • Using the .query() method will send the DISplay:PLOTView1:CURSor:STATE? query.
  • Using the .verify(value) method will send the DISplay:PLOTView1:CURSor:STATE? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:PLOTView1:CURSor:STATE value command.
SCPI Syntax 
- DISplay:PLOTView1:CURSor:STATE {ON|OFF|<NR1>}
- DISplay:PLOTView1:CURSor:STATE?
Info
  • 1 is the Plot waveform number.
  • OFF disables the specified cursor.
  • ON enables the specified cursor.
  • <NR1> = 0 disables the specified cursor; any other value enables the specified cursor.

vbars property 

vbars: DisplayPlotview1CursorVbars

Return the DISplay:PLOTView1:CURSor:VBArs command tree.

Usage
  • Using the .query() method will send the DISplay:PLOTView1:CURSor:VBArs? query.
  • Using the .verify(value) method will send the DISplay:PLOTView1:CURSor:VBArs? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .aposition: The DISplay:PLOTView1:CURSor:VBArs:APOSition command.
  • .bposition: The DISplay:PLOTView1:CURSor:VBArs:BPOSition command.
  • .delta: The DISplay:PLOTView1:CURSor:VBArs:DELTa command.
  • .units: The DISplay:PLOTView1:CURSor:VBArs:UNIts command.

waveform property 

waveform: DisplayPlotview1CursorWaveform

Return the DISplay:PLOTView1:CURSor:WAVEform command tree.

Usage
  • Using the .query() method will send the DISplay:PLOTView1:CURSor:WAVEform? query.
  • Using the .verify(value) method will send the DISplay:PLOTView1:CURSor:WAVEform? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .aposition: The DISplay:PLOTView1:CURSor:WAVEform:APOSition command.
  • .bposition: The DISplay:PLOTView1:CURSor:WAVEform:BPOSition command.

DisplayPlotview1CursorAsource

Bases: SCPICmdRead

The DISplay:PLOTView1:CURSor:ASOUrce command.

Description
  • This command queries the cursor source for plot cursor A.
Usage
  • Using the .query() method will send the DISplay:PLOTView1:CURSor:ASOUrce? query.
  • Using the .verify(value) method will send the DISplay:PLOTView1:CURSor:ASOUrce? query and raise an AssertionError if the returned value does not match value.
SCPI Syntax 
- DISplay:PLOTView1:CURSor:ASOUrce?
Info
  • 1 is the Plot waveform number.

DisplayPlotview1CursorBsource

Bases: SCPICmdRead

The DISplay:PLOTView1:CURSor:BSOUrce command.

Description
  • This command queries the cursor source for plot cursor B.
Usage
  • Using the .query() method will send the DISplay:PLOTView1:CURSor:BSOUrce? query.
  • Using the .verify(value) method will send the DISplay:PLOTView1:CURSor:BSOUrce? query and raise an AssertionError if the returned value does not match value.
SCPI Syntax 
- DISplay:PLOTView1:CURSor:BSOUrce?
Info
  • 1 is the Plot waveform number.

DisplayPlotview1CursorDdt

Bases: SCPICmdRead

The DISplay:PLOTView1:CURSor:DDT command.

Description
  • This command returns the delta V over delta T cursor readout value for the specified Plot view.
Usage
  • Using the .query() method will send the DISplay:PLOTView1:CURSor:DDT? query.
  • Using the .verify(value) method will send the DISplay:PLOTView1:CURSor:DDT? query and raise an AssertionError if the returned value does not match value.
SCPI Syntax 
- DISplay:PLOTView1:CURSor:DDT?
Info
  • PlotView<x> is the Plot waveform number.

DisplayPlotview1CursorFunction

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:PLOTView1:CURSor:FUNCtion command.

Description
  • This command sets or queries the cursor mode for the specified Plot view.
Usage
  • Using the .query() method will send the DISplay:PLOTView1:CURSor:FUNCtion? query.
  • Using the .verify(value) method will send the DISplay:PLOTView1:CURSor:FUNCtion? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:PLOTView1:CURSor:FUNCtion value command.
SCPI Syntax 
- DISplay:PLOTView1:CURSor:FUNCtion {WAVEFORM|VBArs|HBArs|SCREEN}
- DISplay:PLOTView1:CURSor:FUNCtion?
Info
  • 1 is the Plot waveform number.
  • WAVEFORM specifies to display the paired cursors in YT display format for measuring waveform amplitude and time.
  • VBArs specifies vertical bar cursors, which measure in horizontal units.
  • HBArs specifies horizontal bar cursors, which measure in vertical units.
  • SCREEN specifies to display both horizontal and vertical bar cursors, which measure the selected waveform in horizontal and vertical units. Use these cursors to measure anywhere in the waveform display area.

DisplayPlotview1CursorHbars

Bases: SCPICmdRead

The DISplay:PLOTView1:CURSor:HBArs command tree.

Usage
  • Using the .query() method will send the DISplay:PLOTView1:CURSor:HBArs? query.
  • Using the .verify(value) method will send the DISplay:PLOTView1:CURSor:HBArs? query and raise an AssertionError if the returned value does not match value.
Properties
  • .aposition: The DISplay:PLOTView1:CURSor:HBArs:APOSition command.
  • .aunits: The DISplay:PLOTView1:CURSor:HBArs:AUNIts command.
  • .bposition: The DISplay:PLOTView1:CURSor:HBArs:BPOSition command.
  • .bunits: The DISplay:PLOTView1:CURSor:HBArs:BUNIts command.
  • .delta: The DISplay:PLOTView1:CURSor:HBArs:DELTa command.

aposition property 

aposition: DisplayPlotview1CursorHbarsAposition

Return the DISplay:PLOTView1:CURSor:HBArs:APOSition command.

Description
  • This command sets or queries the horizontal cursor A position for the specified Plot view.
Usage
  • Using the .query() method will send the DISplay:PLOTView1:CURSor:HBArs:APOSition? query.
  • Using the .verify(value) method will send the DISplay:PLOTView1:CURSor:HBArs:APOSition? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:PLOTView1:CURSor:HBArs:APOSition value command.
SCPI Syntax 
- DISplay:PLOTView1:CURSor:HBArs:APOSition <NR3>
- DISplay:PLOTView1:CURSor:HBArs:APOSition?
Info
  • 1 is the Plot waveform number.
  • <NR3> is the cursor position.

aunits property 

aunits: DisplayPlotview1CursorHbarsAunits

Return the DISplay:PLOTView1:CURSor:HBArs:AUNIts command.

Description
  • This command queries the horizontal cursor A vertical units for the specified Plot view.
Usage
  • Using the .query() method will send the DISplay:PLOTView1:CURSor:HBArs:AUNIts? query.
  • Using the .verify(value) method will send the DISplay:PLOTView1:CURSor:HBArs:AUNIts? query and raise an AssertionError if the returned value does not match value.
SCPI Syntax 
- DISplay:PLOTView1:CURSor:HBArs:AUNIts?

bposition property 

bposition: DisplayPlotview1CursorHbarsBposition

Return the DISplay:PLOTView1:CURSor:HBArs:BPOSition command.

Description
  • This command sets or queries the horizontal cursor B position for the specified Plot view.
Usage
  • Using the .query() method will send the DISplay:PLOTView1:CURSor:HBArs:BPOSition? query.
  • Using the .verify(value) method will send the DISplay:PLOTView1:CURSor:HBArs:BPOSition? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:PLOTView1:CURSor:HBArs:BPOSition value command.
SCPI Syntax 
- DISplay:PLOTView1:CURSor:HBArs:BPOSition <NR3>
- DISplay:PLOTView1:CURSor:HBArs:BPOSition?
Info
  • 1 is the Plot waveform number.
  • <NR3> is the HBArs vertical position.

bunits property 

bunits: DisplayPlotview1CursorHbarsBunits

Return the DISplay:PLOTView1:CURSor:HBArs:BUNIts command.

Description
  • This command queries the cursor B vertical units for the specified Plot view.
Usage
  • Using the .query() method will send the DISplay:PLOTView1:CURSor:HBArs:BUNIts? query.
  • Using the .verify(value) method will send the DISplay:PLOTView1:CURSor:HBArs:BUNIts? query and raise an AssertionError if the returned value does not match value.
SCPI Syntax 
- DISplay:PLOTView1:CURSor:HBArs:BUNIts?
Info
  • 1 is the Plot waveform number.

delta property 

delta: DisplayPlotview1CursorHbarsDelta

Return the DISplay:PLOTView1:CURSor:HBArs:DELTa command.

Description
  • This command queries the delta V cursor readout value for the specified Plot view.
Usage
  • Using the .query() method will send the DISplay:PLOTView1:CURSor:HBArs:DELTa? query.
  • Using the .verify(value) method will send the DISplay:PLOTView1:CURSor:HBArs:DELTa? query and raise an AssertionError if the returned value does not match value.
SCPI Syntax 
- DISplay:PLOTView1:CURSor:HBArs:DELTa?
Info
  • 1 is the Plot waveform number.

DisplayPlotview1CursorHbarsAposition

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:PLOTView1:CURSor:HBArs:APOSition command.

Description
  • This command sets or queries the horizontal cursor A position for the specified Plot view.
Usage
  • Using the .query() method will send the DISplay:PLOTView1:CURSor:HBArs:APOSition? query.
  • Using the .verify(value) method will send the DISplay:PLOTView1:CURSor:HBArs:APOSition? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:PLOTView1:CURSor:HBArs:APOSition value command.
SCPI Syntax 
- DISplay:PLOTView1:CURSor:HBArs:APOSition <NR3>
- DISplay:PLOTView1:CURSor:HBArs:APOSition?
Info
  • 1 is the Plot waveform number.
  • <NR3> is the cursor position.

DisplayPlotview1CursorHbarsAunits

Bases: SCPICmdRead

The DISplay:PLOTView1:CURSor:HBArs:AUNIts command.

Description
  • This command queries the horizontal cursor A vertical units for the specified Plot view.
Usage
  • Using the .query() method will send the DISplay:PLOTView1:CURSor:HBArs:AUNIts? query.
  • Using the .verify(value) method will send the DISplay:PLOTView1:CURSor:HBArs:AUNIts? query and raise an AssertionError if the returned value does not match value.
SCPI Syntax 
- DISplay:PLOTView1:CURSor:HBArs:AUNIts?

DisplayPlotview1CursorHbarsBposition

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:PLOTView1:CURSor:HBArs:BPOSition command.

Description
  • This command sets or queries the horizontal cursor B position for the specified Plot view.
Usage
  • Using the .query() method will send the DISplay:PLOTView1:CURSor:HBArs:BPOSition? query.
  • Using the .verify(value) method will send the DISplay:PLOTView1:CURSor:HBArs:BPOSition? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:PLOTView1:CURSor:HBArs:BPOSition value command.
SCPI Syntax 
- DISplay:PLOTView1:CURSor:HBArs:BPOSition <NR3>
- DISplay:PLOTView1:CURSor:HBArs:BPOSition?
Info
  • 1 is the Plot waveform number.
  • <NR3> is the HBArs vertical position.

DisplayPlotview1CursorHbarsBunits

Bases: SCPICmdRead

The DISplay:PLOTView1:CURSor:HBArs:BUNIts command.

Description
  • This command queries the cursor B vertical units for the specified Plot view.
Usage
  • Using the .query() method will send the DISplay:PLOTView1:CURSor:HBArs:BUNIts? query.
  • Using the .verify(value) method will send the DISplay:PLOTView1:CURSor:HBArs:BUNIts? query and raise an AssertionError if the returned value does not match value.
SCPI Syntax 
- DISplay:PLOTView1:CURSor:HBArs:BUNIts?
Info
  • 1 is the Plot waveform number.

DisplayPlotview1CursorHbarsDelta

Bases: SCPICmdRead

The DISplay:PLOTView1:CURSor:HBArs:DELTa command.

Description
  • This command queries the delta V cursor readout value for the specified Plot view.
Usage
  • Using the .query() method will send the DISplay:PLOTView1:CURSor:HBArs:DELTa? query.
  • Using the .verify(value) method will send the DISplay:PLOTView1:CURSor:HBArs:DELTa? query and raise an AssertionError if the returned value does not match value.
SCPI Syntax 
- DISplay:PLOTView1:CURSor:HBArs:DELTa?
Info
  • 1 is the Plot waveform number.

DisplayPlotview1CursorMode

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:PLOTView1:CURSor:MODe command.

Description
  • This command sets or queries the cursor tracking mode for the specified Plot view.
Usage
  • Using the .query() method will send the DISplay:PLOTView1:CURSor:MODe? query.
  • Using the .verify(value) method will send the DISplay:PLOTView1:CURSor:MODe? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:PLOTView1:CURSor:MODe value command.
SCPI Syntax 
- DISplay:PLOTView1:CURSor:MODe {INDEPENDENT|TRACK}
- DISplay:PLOTView1:CURSor:MODe?
Info
  • 1 is the Plot waveform number.
  • INDEPENDENT allows independent adjustment of the two cursors.
  • TRACK ties the navigational functionality of the two cursors together. For cursor A adjustments, this ties the movement of the two cursors together; however, cursor B continues to move independently of cursor A.

DisplayPlotview1CursorOneoverdeltatvalue

Bases: SCPICmdRead

The DISplay:PLOTView1:CURSor:ONEOVERDELTATVALUE command.

Description
  • This command sets or queries the one over delta T cursor readout value for the specified Plot view.
Usage
  • Using the .query() method will send the DISplay:PLOTView1:CURSor:ONEOVERDELTATVALUE? query.
  • Using the .verify(value) method will send the DISplay:PLOTView1:CURSor:ONEOVERDELTATVALUE? query and raise an AssertionError if the returned value does not match value.
SCPI Syntax 
- DISplay:PLOTView1:CURSor:ONEOVERDELTATVALUE?
Info
  • 1 is the Plot waveform number.

DisplayPlotview1CursorRolocation

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:PLOTView1:CURSor:ROLOCATION command.

Description
  • This command sets or queries the location to display the specified plot cursor readouts (in the plot graticule or in a badge in the Results Bar).
Usage
  • Using the .query() method will send the DISplay:PLOTView1:CURSor:ROLOCATION? query.
  • Using the .verify(value) method will send the DISplay:PLOTView1:CURSor:ROLOCATION? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:PLOTView1:CURSor:ROLOCATION value command.
SCPI Syntax 
- DISplay:PLOTView1:CURSor:ROLOCATION {GRATICULE|BADGE}
- DISplay:PLOTView1:CURSor:ROLOCATION?
Info
  • 1 is the waveform plot number.
  • GRATICULE sets the plot cursor readouts to display as part of the cursors in the plot view.
  • BADGE removes the plot cursor readouts from the cursors in the graticule and displays the cursor information as a badge in the Results Bar.

DisplayPlotview1CursorScreen

Bases: SCPICmdRead

The DISplay:PLOTView1:CURSor:SCREEN command tree.

Usage
  • Using the .query() method will send the DISplay:PLOTView1:CURSor:SCREEN? query.
  • Using the .verify(value) method will send the DISplay:PLOTView1:CURSor:SCREEN? query and raise an AssertionError if the returned value does not match value.
Properties
  • .axposition: The DISplay:PLOTView1:CURSor:SCREEN:AXPOSition command.
  • .ayposition: The DISplay:PLOTView1:CURSor:SCREEN:AYPOSition command.
  • .bxposition: The DISplay:PLOTView1:CURSor:SCREEN:BXPOSition command.
  • .byposition: The DISplay:PLOTView1:CURSor:SCREEN:BYPOSition command.

axposition property 

axposition: DisplayPlotview1CursorScreenAxposition

Return the DISplay:PLOTView1:CURSor:SCREEN:AXPOSition command.

Description
  • This command sets or queries the horizontal cursor A position of the specified cursor in the specified view.
Usage
  • Using the .query() method will send the DISplay:PLOTView1:CURSor:SCREEN:AXPOSition? query.
  • Using the .verify(value) method will send the DISplay:PLOTView1:CURSor:SCREEN:AXPOSition? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:PLOTView1:CURSor:SCREEN:AXPOSition value command.
SCPI Syntax 
- DISplay:PLOTView1:CURSor:SCREEN:AXPOSition <NR3>
- DISplay:PLOTView1:CURSor:SCREEN:AXPOSition?
Info
  • 1 is the Plot waveform number.
  • <NR3> is the horizontal cursor A position.

ayposition property 

ayposition: DisplayPlotview1CursorScreenAyposition

Return the DISplay:PLOTView1:CURSor:SCREEN:AYPOSition command.

Description
  • This command sets or queries the vertical cursor A position of the specified cursor in the specified view.
Usage
  • Using the .query() method will send the DISplay:PLOTView1:CURSor:SCREEN:AYPOSition? query.
  • Using the .verify(value) method will send the DISplay:PLOTView1:CURSor:SCREEN:AYPOSition? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:PLOTView1:CURSor:SCREEN:AYPOSition value command.
SCPI Syntax 
- DISplay:PLOTView1:CURSor:SCREEN:AYPOSition <NR3>
- DISplay:PLOTView1:CURSor:SCREEN:AYPOSition?
Info
  • 1 is the Plot waveform number.
  • <NR3> is the vertical cursor A position.

bxposition property 

bxposition: DisplayPlotview1CursorScreenBxposition

Return the DISplay:PLOTView1:CURSor:SCREEN:BXPOSition command.

Description
  • This command sets or queries the horizontal cursor B position of the specified cursor in the specified view.
Usage
  • Using the .query() method will send the DISplay:PLOTView1:CURSor:SCREEN:BXPOSition? query.
  • Using the .verify(value) method will send the DISplay:PLOTView1:CURSor:SCREEN:BXPOSition? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:PLOTView1:CURSor:SCREEN:BXPOSition value command.
SCPI Syntax 
- DISplay:PLOTView1:CURSor:SCREEN:BXPOSition <NR3>
- DISplay:PLOTView1:CURSor:SCREEN:BXPOSition?
Info
  • 1 is the Plot waveform number.
  • <NR3> is the horizontal cursor B position.

byposition property 

byposition: DisplayPlotview1CursorScreenByposition

Return the DISplay:PLOTView1:CURSor:SCREEN:BYPOSition command.

Description
  • This command sets or queries the vertical cursor B position of the specified cursor in the specified view.
Usage
  • Using the .query() method will send the DISplay:PLOTView1:CURSor:SCREEN:BYPOSition? query.
  • Using the .verify(value) method will send the DISplay:PLOTView1:CURSor:SCREEN:BYPOSition? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:PLOTView1:CURSor:SCREEN:BYPOSition value command.
SCPI Syntax 
- DISplay:PLOTView1:CURSor:SCREEN:BYPOSition <NR3>
- DISplay:PLOTView1:CURSor:SCREEN:BYPOSition?
Info
  • 1 is the Plot waveform number.
  • <NR3> is the vertical cursor B position.

DisplayPlotview1CursorScreenAxposition

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:PLOTView1:CURSor:SCREEN:AXPOSition command.

Description
  • This command sets or queries the horizontal cursor A position of the specified cursor in the specified view.
Usage
  • Using the .query() method will send the DISplay:PLOTView1:CURSor:SCREEN:AXPOSition? query.
  • Using the .verify(value) method will send the DISplay:PLOTView1:CURSor:SCREEN:AXPOSition? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:PLOTView1:CURSor:SCREEN:AXPOSition value command.
SCPI Syntax 
- DISplay:PLOTView1:CURSor:SCREEN:AXPOSition <NR3>
- DISplay:PLOTView1:CURSor:SCREEN:AXPOSition?
Info
  • 1 is the Plot waveform number.
  • <NR3> is the horizontal cursor A position.

DisplayPlotview1CursorScreenAyposition

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:PLOTView1:CURSor:SCREEN:AYPOSition command.

Description
  • This command sets or queries the vertical cursor A position of the specified cursor in the specified view.
Usage
  • Using the .query() method will send the DISplay:PLOTView1:CURSor:SCREEN:AYPOSition? query.
  • Using the .verify(value) method will send the DISplay:PLOTView1:CURSor:SCREEN:AYPOSition? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:PLOTView1:CURSor:SCREEN:AYPOSition value command.
SCPI Syntax 
- DISplay:PLOTView1:CURSor:SCREEN:AYPOSition <NR3>
- DISplay:PLOTView1:CURSor:SCREEN:AYPOSition?
Info
  • 1 is the Plot waveform number.
  • <NR3> is the vertical cursor A position.

DisplayPlotview1CursorScreenBxposition

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:PLOTView1:CURSor:SCREEN:BXPOSition command.

Description
  • This command sets or queries the horizontal cursor B position of the specified cursor in the specified view.
Usage
  • Using the .query() method will send the DISplay:PLOTView1:CURSor:SCREEN:BXPOSition? query.
  • Using the .verify(value) method will send the DISplay:PLOTView1:CURSor:SCREEN:BXPOSition? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:PLOTView1:CURSor:SCREEN:BXPOSition value command.
SCPI Syntax 
- DISplay:PLOTView1:CURSor:SCREEN:BXPOSition <NR3>
- DISplay:PLOTView1:CURSor:SCREEN:BXPOSition?
Info
  • 1 is the Plot waveform number.
  • <NR3> is the horizontal cursor B position.

DisplayPlotview1CursorScreenByposition

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:PLOTView1:CURSor:SCREEN:BYPOSition command.

Description
  • This command sets or queries the vertical cursor B position of the specified cursor in the specified view.
Usage
  • Using the .query() method will send the DISplay:PLOTView1:CURSor:SCREEN:BYPOSition? query.
  • Using the .verify(value) method will send the DISplay:PLOTView1:CURSor:SCREEN:BYPOSition? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:PLOTView1:CURSor:SCREEN:BYPOSition value command.
SCPI Syntax 
- DISplay:PLOTView1:CURSor:SCREEN:BYPOSition <NR3>
- DISplay:PLOTView1:CURSor:SCREEN:BYPOSition?
Info
  • 1 is the Plot waveform number.
  • <NR3> is the vertical cursor B position.

DisplayPlotview1CursorSplitmode

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:PLOTView1:CURSor:SPLITMODE command.

Description
  • This command sets or queries the cursor source mode in the specified view.
Usage
  • Using the .query() method will send the DISplay:PLOTView1:CURSor:SPLITMODE? query.
  • Using the .verify(value) method will send the DISplay:PLOTView1:CURSor:SPLITMODE? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:PLOTView1:CURSor:SPLITMODE value command.
SCPI Syntax 
- DISplay:PLOTView1:CURSor:SPLITMODE {SAME|SPLIT}
- DISplay:PLOTView1:CURSor:SPLITMODE?
Info
  • 1 is the Plot waveform number.
  • SAME specifies that both cursors are on the same waveform.
  • SPLIT specifies that the cursors can be on different waveforms.

DisplayPlotview1CursorState

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:PLOTView1:CURSor:STATE command.

Description
  • This command sets or queries the visible state of the cursor of the specified cursor in the specified view.
Usage
  • Using the .query() method will send the DISplay:PLOTView1:CURSor:STATE? query.
  • Using the .verify(value) method will send the DISplay:PLOTView1:CURSor:STATE? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:PLOTView1:CURSor:STATE value command.
SCPI Syntax 
- DISplay:PLOTView1:CURSor:STATE {ON|OFF|<NR1>}
- DISplay:PLOTView1:CURSor:STATE?
Info
  • 1 is the Plot waveform number.
  • OFF disables the specified cursor.
  • ON enables the specified cursor.
  • <NR1> = 0 disables the specified cursor; any other value enables the specified cursor.

DisplayPlotview1CursorVbars

Bases: SCPICmdRead

The DISplay:PLOTView1:CURSor:VBArs command tree.

Usage
  • Using the .query() method will send the DISplay:PLOTView1:CURSor:VBArs? query.
  • Using the .verify(value) method will send the DISplay:PLOTView1:CURSor:VBArs? query and raise an AssertionError if the returned value does not match value.
Properties
  • .aposition: The DISplay:PLOTView1:CURSor:VBArs:APOSition command.
  • .bposition: The DISplay:PLOTView1:CURSor:VBArs:BPOSition command.
  • .delta: The DISplay:PLOTView1:CURSor:VBArs:DELTa command.
  • .units: The DISplay:PLOTView1:CURSor:VBArs:UNIts command.

aposition property 

aposition: DisplayPlotview1CursorVbarsAposition

Return the DISplay:PLOTView1:CURSor:VBArs:APOSition command.

Description
  • This command sets or queries the vertical cursor A position of the specified cursor in the specified view.
Usage
  • Using the .query() method will send the DISplay:PLOTView1:CURSor:VBArs:APOSition? query.
  • Using the .verify(value) method will send the DISplay:PLOTView1:CURSor:VBArs:APOSition? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:PLOTView1:CURSor:VBArs:APOSition value command.
SCPI Syntax 
- DISplay:PLOTView1:CURSor:VBArs:APOSition <NR3>
- DISplay:PLOTView1:CURSor:VBArs:APOSition?
Info
  • 1 is the Plot waveform number.
  • <NR3> is the vertical cursor A position.

bposition property 

bposition: DisplayPlotview1CursorVbarsBposition

Return the DISplay:PLOTView1:CURSor:VBArs:BPOSition command.

Description
  • This command sets or queries the vertical cursor B position of the specified cursor in the specified view.
Usage
  • Using the .query() method will send the DISplay:PLOTView1:CURSor:VBArs:BPOSition? query.
  • Using the .verify(value) method will send the DISplay:PLOTView1:CURSor:VBArs:BPOSition? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:PLOTView1:CURSor:VBArs:BPOSition value command.
SCPI Syntax 
- DISplay:PLOTView1:CURSor:VBArs:BPOSition <NR3>
- DISplay:PLOTView1:CURSor:VBArs:BPOSition?
Info
  • 1 is the Plot waveform number.
  • <NR3> is the vertical cursor B position.

delta property 

delta: DisplayPlotview1CursorVbarsDelta

Return the DISplay:PLOTView1:CURSor:VBArs:DELTa command.

Description
  • This command queries the delta T cursor readout value of the specified cursor in the specified view.
Usage
  • Using the .query() method will send the DISplay:PLOTView1:CURSor:VBArs:DELTa? query.
  • Using the .verify(value) method will send the DISplay:PLOTView1:CURSor:VBArs:DELTa? query and raise an AssertionError if the returned value does not match value.
SCPI Syntax 
- DISplay:PLOTView1:CURSor:VBArs:DELTa?
Info
  • 1 is the Plot waveform number.

units property 

units: DisplayPlotview1CursorVbarsUnits

Return the DISplay:PLOTView1:CURSor:VBArs:UNIts command.

Description
  • This command queries the VBArs cursor readout units of the specified cursor in the specified view.
Usage
  • Using the .query() method will send the DISplay:PLOTView1:CURSor:VBArs:UNIts? query.
  • Using the .verify(value) method will send the DISplay:PLOTView1:CURSor:VBArs:UNIts? query and raise an AssertionError if the returned value does not match value.
SCPI Syntax 
- DISplay:PLOTView1:CURSor:VBArs:UNIts?
Info
  • 1 is the Plot waveform number.

DisplayPlotview1CursorVbarsAposition

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:PLOTView1:CURSor:VBArs:APOSition command.

Description
  • This command sets or queries the vertical cursor A position of the specified cursor in the specified view.
Usage
  • Using the .query() method will send the DISplay:PLOTView1:CURSor:VBArs:APOSition? query.
  • Using the .verify(value) method will send the DISplay:PLOTView1:CURSor:VBArs:APOSition? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:PLOTView1:CURSor:VBArs:APOSition value command.
SCPI Syntax 
- DISplay:PLOTView1:CURSor:VBArs:APOSition <NR3>
- DISplay:PLOTView1:CURSor:VBArs:APOSition?
Info
  • 1 is the Plot waveform number.
  • <NR3> is the vertical cursor A position.

DisplayPlotview1CursorVbarsBposition

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:PLOTView1:CURSor:VBArs:BPOSition command.

Description
  • This command sets or queries the vertical cursor B position of the specified cursor in the specified view.
Usage
  • Using the .query() method will send the DISplay:PLOTView1:CURSor:VBArs:BPOSition? query.
  • Using the .verify(value) method will send the DISplay:PLOTView1:CURSor:VBArs:BPOSition? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:PLOTView1:CURSor:VBArs:BPOSition value command.
SCPI Syntax 
- DISplay:PLOTView1:CURSor:VBArs:BPOSition <NR3>
- DISplay:PLOTView1:CURSor:VBArs:BPOSition?
Info
  • 1 is the Plot waveform number.
  • <NR3> is the vertical cursor B position.

DisplayPlotview1CursorVbarsDelta

Bases: SCPICmdRead

The DISplay:PLOTView1:CURSor:VBArs:DELTa command.

Description
  • This command queries the delta T cursor readout value of the specified cursor in the specified view.
Usage
  • Using the .query() method will send the DISplay:PLOTView1:CURSor:VBArs:DELTa? query.
  • Using the .verify(value) method will send the DISplay:PLOTView1:CURSor:VBArs:DELTa? query and raise an AssertionError if the returned value does not match value.
SCPI Syntax 
- DISplay:PLOTView1:CURSor:VBArs:DELTa?
Info
  • 1 is the Plot waveform number.

DisplayPlotview1CursorVbarsUnits

Bases: SCPICmdRead

The DISplay:PLOTView1:CURSor:VBArs:UNIts command.

Description
  • This command queries the VBArs cursor readout units of the specified cursor in the specified view.
Usage
  • Using the .query() method will send the DISplay:PLOTView1:CURSor:VBArs:UNIts? query.
  • Using the .verify(value) method will send the DISplay:PLOTView1:CURSor:VBArs:UNIts? query and raise an AssertionError if the returned value does not match value.
SCPI Syntax 
- DISplay:PLOTView1:CURSor:VBArs:UNIts?
Info
  • 1 is the Plot waveform number.

DisplayPlotview1CursorWaveform

Bases: SCPICmdRead

The DISplay:PLOTView1:CURSor:WAVEform command tree.

Usage
  • Using the .query() method will send the DISplay:PLOTView1:CURSor:WAVEform? query.
  • Using the .verify(value) method will send the DISplay:PLOTView1:CURSor:WAVEform? query and raise an AssertionError if the returned value does not match value.
Properties
  • .aposition: The DISplay:PLOTView1:CURSor:WAVEform:APOSition command.
  • .bposition: The DISplay:PLOTView1:CURSor:WAVEform:BPOSition command.

aposition property 

aposition: DisplayPlotview1CursorWaveformAposition

Return the DISplay:PLOTView1:CURSor:WAVEform:APOSition command.

Description
  • This command sets or queries the waveform cursor A horizontal position of the specified cursor in the specified view.
Usage
  • Using the .query() method will send the DISplay:PLOTView1:CURSor:WAVEform:APOSition? query.
  • Using the .verify(value) method will send the DISplay:PLOTView1:CURSor:WAVEform:APOSition? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:PLOTView1:CURSor:WAVEform:APOSition value command.
SCPI Syntax 
- DISplay:PLOTView1:CURSor:WAVEform:APOSition <NR3>
- DISplay:PLOTView1:CURSor:WAVEform:APOSition?
Info
  • 1 is the Plot waveform number.
  • <NR3> is the horizontal cursor A position.

bposition property 

bposition: DisplayPlotview1CursorWaveformBposition

Return the DISplay:PLOTView1:CURSor:WAVEform:BPOSition command.

Description
  • This command sets or queries the waveform cursor B horizontal position of the specified cursor in the specified view.
Usage
  • Using the .query() method will send the DISplay:PLOTView1:CURSor:WAVEform:BPOSition? query.
  • Using the .verify(value) method will send the DISplay:PLOTView1:CURSor:WAVEform:BPOSition? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:PLOTView1:CURSor:WAVEform:BPOSition value command.
SCPI Syntax 
- DISplay:PLOTView1:CURSor:WAVEform:BPOSition <NR3>
- DISplay:PLOTView1:CURSor:WAVEform:BPOSition?
Info
  • 1 is the Plot waveform number.
  • <NR3> is the horizontal cursor B position.

DisplayPlotview1CursorWaveformAposition

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:PLOTView1:CURSor:WAVEform:APOSition command.

Description
  • This command sets or queries the waveform cursor A horizontal position of the specified cursor in the specified view.
Usage
  • Using the .query() method will send the DISplay:PLOTView1:CURSor:WAVEform:APOSition? query.
  • Using the .verify(value) method will send the DISplay:PLOTView1:CURSor:WAVEform:APOSition? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:PLOTView1:CURSor:WAVEform:APOSition value command.
SCPI Syntax 
- DISplay:PLOTView1:CURSor:WAVEform:APOSition <NR3>
- DISplay:PLOTView1:CURSor:WAVEform:APOSition?
Info
  • 1 is the Plot waveform number.
  • <NR3> is the horizontal cursor A position.

DisplayPlotview1CursorWaveformBposition

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:PLOTView1:CURSor:WAVEform:BPOSition command.

Description
  • This command sets or queries the waveform cursor B horizontal position of the specified cursor in the specified view.
Usage
  • Using the .query() method will send the DISplay:PLOTView1:CURSor:WAVEform:BPOSition? query.
  • Using the .verify(value) method will send the DISplay:PLOTView1:CURSor:WAVEform:BPOSition? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:PLOTView1:CURSor:WAVEform:BPOSition value command.
SCPI Syntax 
- DISplay:PLOTView1:CURSor:WAVEform:BPOSition <NR3>
- DISplay:PLOTView1:CURSor:WAVEform:BPOSition?
Info
  • 1 is the Plot waveform number.
  • <NR3> is the horizontal cursor B position.

DisplayPlotview1Gridlines

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:PLOTView1:GRIDlines command.

Description
  • This command sets or queries the Grid (graticule) lines setting of the specified plot. This command works for plots that have vertical and horizontal units associated with the graticule. For example, this command does not work for XY or XYZ plots.
Usage
  • Using the .query() method will send the DISplay:PLOTView1:GRIDlines? query.
  • Using the .verify(value) method will send the DISplay:PLOTView1:GRIDlines? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:PLOTView1:GRIDlines value command.
SCPI Syntax 
- DISplay:PLOTView1:GRIDlines {HORizontal|VERTical|BOTH}
- DISplay:PLOTView1:GRIDlines?
Info
  • 1 is the Plot waveform number.
  • HORizontal specifies horizontal grid lines.
  • VERTical specifies vertical grid lines.
  • BOTH specifies both vertical and horizontal grid lines.

DisplayPlotview1Zoom

Bases: SCPICmdRead

The DISplay:PLOTView1:ZOOM command tree.

Usage
  • Using the .query() method will send the DISplay:PLOTView1:ZOOM? query.
  • Using the .verify(value) method will send the DISplay:PLOTView1:ZOOM? query and raise an AssertionError if the returned value does not match value.
Properties
  • .xaxis: The DISplay:PLOTView1:ZOOM:XAXIS command tree.
  • .yaxis: The DISplay:PLOTView1:ZOOM:YAXIS command tree.

xaxis property 

xaxis: DisplayPlotview1ZoomXaxis

Return the DISplay:PLOTView1:ZOOM:XAXIS command tree.

Usage
  • Using the .query() method will send the DISplay:PLOTView1:ZOOM:XAXIS? query.
  • Using the .verify(value) method will send the DISplay:PLOTView1:ZOOM:XAXIS? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .from: The DISplay:PLOTView1:ZOOM:XAXIS:FROM command.
  • .to: The DISplay:PLOTView1:ZOOM:XAXIS:TO command.

yaxis property 

yaxis: DisplayPlotview1ZoomYaxis

Return the DISplay:PLOTView1:ZOOM:YAXIS command tree.

Usage
  • Using the .query() method will send the DISplay:PLOTView1:ZOOM:YAXIS? query.
  • Using the .verify(value) method will send the DISplay:PLOTView1:ZOOM:YAXIS? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .from: The DISplay:PLOTView1:ZOOM:YAXIS:FROM command.
  • .to: The DISplay:PLOTView1:ZOOM:YAXIS:TO command.

DisplayPlotview1ZoomXaxis

Bases: SCPICmdRead

The DISplay:PLOTView1:ZOOM:XAXIS command tree.

Usage
  • Using the .query() method will send the DISplay:PLOTView1:ZOOM:XAXIS? query.
  • Using the .verify(value) method will send the DISplay:PLOTView1:ZOOM:XAXIS? query and raise an AssertionError if the returned value does not match value.
Properties
  • .from: The DISplay:PLOTView1:ZOOM:XAXIS:FROM command.
  • .to: The DISplay:PLOTView1:ZOOM:XAXIS:TO command.

from_ property 

from_: DisplayPlotview1ZoomXaxisFrom

Return the DISplay:PLOTView1:ZOOM:XAXIS:FROM command.

Description
  • This command sets or queries the value of the left edge of the specified plot.
Usage
  • Using the .query() method will send the DISplay:PLOTView1:ZOOM:XAXIS:FROM? query.
  • Using the .verify(value) method will send the DISplay:PLOTView1:ZOOM:XAXIS:FROM? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:PLOTView1:ZOOM:XAXIS:FROM value command.
SCPI Syntax 
- DISplay:PLOTView1:ZOOM:XAXIS:FROM <NR3>
- DISplay:PLOTView1:ZOOM:XAXIS:FROM?
Info
  • 1 is the Plot waveform number.
  • <NR3> is start of the zoom x-axis.

to property 

to: DisplayPlotview1ZoomXaxisTo

Return the DISplay:PLOTView1:ZOOM:XAXIS:TO command.

Description
  • This command sets or queries the value of the right edge of the specified plot.
Usage
  • Using the .query() method will send the DISplay:PLOTView1:ZOOM:XAXIS:TO? query.
  • Using the .verify(value) method will send the DISplay:PLOTView1:ZOOM:XAXIS:TO? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:PLOTView1:ZOOM:XAXIS:TO value command.
SCPI Syntax 
- DISplay:PLOTView1:ZOOM:XAXIS:TO <NR3>
- DISplay:PLOTView1:ZOOM:XAXIS:TO?
Info
  • 1 is the Plot waveform number.
  • <NR3> is the end of the zoom x-axis.

DisplayPlotview1ZoomXaxisFrom

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:PLOTView1:ZOOM:XAXIS:FROM command.

Description
  • This command sets or queries the value of the left edge of the specified plot.
Usage
  • Using the .query() method will send the DISplay:PLOTView1:ZOOM:XAXIS:FROM? query.
  • Using the .verify(value) method will send the DISplay:PLOTView1:ZOOM:XAXIS:FROM? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:PLOTView1:ZOOM:XAXIS:FROM value command.
SCPI Syntax 
- DISplay:PLOTView1:ZOOM:XAXIS:FROM <NR3>
- DISplay:PLOTView1:ZOOM:XAXIS:FROM?
Info
  • 1 is the Plot waveform number.
  • <NR3> is start of the zoom x-axis.

DisplayPlotview1ZoomXaxisTo

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:PLOTView1:ZOOM:XAXIS:TO command.

Description
  • This command sets or queries the value of the right edge of the specified plot.
Usage
  • Using the .query() method will send the DISplay:PLOTView1:ZOOM:XAXIS:TO? query.
  • Using the .verify(value) method will send the DISplay:PLOTView1:ZOOM:XAXIS:TO? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:PLOTView1:ZOOM:XAXIS:TO value command.
SCPI Syntax 
- DISplay:PLOTView1:ZOOM:XAXIS:TO <NR3>
- DISplay:PLOTView1:ZOOM:XAXIS:TO?
Info
  • 1 is the Plot waveform number.
  • <NR3> is the end of the zoom x-axis.

DisplayPlotview1ZoomYaxis

Bases: SCPICmdRead

The DISplay:PLOTView1:ZOOM:YAXIS command tree.

Usage
  • Using the .query() method will send the DISplay:PLOTView1:ZOOM:YAXIS? query.
  • Using the .verify(value) method will send the DISplay:PLOTView1:ZOOM:YAXIS? query and raise an AssertionError if the returned value does not match value.
Properties
  • .from: The DISplay:PLOTView1:ZOOM:YAXIS:FROM command.
  • .to: The DISplay:PLOTView1:ZOOM:YAXIS:TO command.

from_ property 

from_: DisplayPlotview1ZoomYaxisFrom

Return the DISplay:PLOTView1:ZOOM:YAXIS:FROM command.

Description
  • This command sets or queries the bottom value of the zoom y-axis in the specified plot view.
Usage
  • Using the .query() method will send the DISplay:PLOTView1:ZOOM:YAXIS:FROM? query.
  • Using the .verify(value) method will send the DISplay:PLOTView1:ZOOM:YAXIS:FROM? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:PLOTView1:ZOOM:YAXIS:FROM value command.
SCPI Syntax 
- DISplay:PLOTView1:ZOOM:YAXIS:FROM <NR3>
- DISplay:PLOTView1:ZOOM:YAXIS:FROM?
Info
  • 1 is the Plot waveform number.
  • <NR3> is the bottom value of the zoom y-axis.

to property 

to: DisplayPlotview1ZoomYaxisTo

Return the DISplay:PLOTView1:ZOOM:YAXIS:TO command.

Description
  • This command sets or queries the top value of the zoom y-axis in the specified plot view.
Usage
  • Using the .query() method will send the DISplay:PLOTView1:ZOOM:YAXIS:TO? query.
  • Using the .verify(value) method will send the DISplay:PLOTView1:ZOOM:YAXIS:TO? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:PLOTView1:ZOOM:YAXIS:TO value command.
SCPI Syntax 
- DISplay:PLOTView1:ZOOM:YAXIS:TO <NR3>
- DISplay:PLOTView1:ZOOM:YAXIS:TO?
Info
  • 1 is the Plot waveform number.
  • <NR3> is the top value of the zoom y-axis.

DisplayPlotview1ZoomYaxisFrom

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:PLOTView1:ZOOM:YAXIS:FROM command.

Description
  • This command sets or queries the bottom value of the zoom y-axis in the specified plot view.
Usage
  • Using the .query() method will send the DISplay:PLOTView1:ZOOM:YAXIS:FROM? query.
  • Using the .verify(value) method will send the DISplay:PLOTView1:ZOOM:YAXIS:FROM? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:PLOTView1:ZOOM:YAXIS:FROM value command.
SCPI Syntax 
- DISplay:PLOTView1:ZOOM:YAXIS:FROM <NR3>
- DISplay:PLOTView1:ZOOM:YAXIS:FROM?
Info
  • 1 is the Plot waveform number.
  • <NR3> is the bottom value of the zoom y-axis.

DisplayPlotview1ZoomYaxisTo

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:PLOTView1:ZOOM:YAXIS:TO command.

Description
  • This command sets or queries the top value of the zoom y-axis in the specified plot view.
Usage
  • Using the .query() method will send the DISplay:PLOTView1:ZOOM:YAXIS:TO? query.
  • Using the .verify(value) method will send the DISplay:PLOTView1:ZOOM:YAXIS:TO? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:PLOTView1:ZOOM:YAXIS:TO value command.
SCPI Syntax 
- DISplay:PLOTView1:ZOOM:YAXIS:TO <NR3>
- DISplay:PLOTView1:ZOOM:YAXIS:TO?
Info
  • 1 is the Plot waveform number.
  • <NR3> is the top value of the zoom y-axis.

DisplayPlotviewItem

Bases: ValidatedDynamicNumberCmd, SCPICmdRead

The DISplay:PLOTVIEW<x> command tree.

Usage
  • Using the .query() method will send the DISplay:PLOTVIEW<x>? query.
  • Using the .verify(value) method will send the DISplay:PLOTVIEW<x>? query and raise an AssertionError if the returned value does not match value.
Properties
  • .xaxis: The DISplay:PLOTVIEW<x>:XAXIS command tree.
  • .yaxis: The DISplay:PLOTVIEW<x>:YAXIS command tree.

xaxis property 

xaxis: DisplayPlotviewItemXaxis

Return the DISplay:PLOTVIEW<x>:XAXIS command tree.

Usage
  • Using the .query() method will send the DISplay:PLOTVIEW<x>:XAXIS? query.
  • Using the .verify(value) method will send the DISplay:PLOTVIEW<x>:XAXIS? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .scale: The DISplay:PLOTVIEW<x>:XAXIS:SCALE command.

yaxis property 

yaxis: DisplayPlotviewItemYaxis

Return the DISplay:PLOTVIEW<x>:YAXIS command tree.

Usage
  • Using the .query() method will send the DISplay:PLOTVIEW<x>:YAXIS? query.
  • Using the .verify(value) method will send the DISplay:PLOTVIEW<x>:YAXIS? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .scale: The DISplay:PLOTVIEW<x>:YAXIS:SCALE command.

DisplayPlotviewItemXaxis

Bases: SCPICmdRead

The DISplay:PLOTVIEW<x>:XAXIS command tree.

Usage
  • Using the .query() method will send the DISplay:PLOTVIEW<x>:XAXIS? query.
  • Using the .verify(value) method will send the DISplay:PLOTVIEW<x>:XAXIS? query and raise an AssertionError if the returned value does not match value.
Properties
  • .scale: The DISplay:PLOTVIEW<x>:XAXIS:SCALE command.

scale property 

scale: DisplayPlotviewItemXaxisScale

Return the DISplay:PLOTVIEW<x>:XAXIS:SCALE command.

Description
  • This command sets or queries the horizontal scale setting for applicable plots (Linear or Log) for the specified plot view.
Usage
  • Using the .query() method will send the DISplay:PLOTVIEW<x>:XAXIS:SCALE? query.
  • Using the .verify(value) method will send the DISplay:PLOTVIEW<x>:XAXIS:SCALE? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:PLOTVIEW<x>:XAXIS:SCALE value command.
SCPI Syntax 
- DISplay:PLOTVIEW<x>:XAXIS:SCALE {LINEAR|LOG}
- DISplay:PLOTVIEW<x>:XAXIS:SCALE?
Info
  • PLOTView<x> is the Plot waveform number.
  • LINEAR creates a plot with linear scales.
  • LOG creates a plot with logarithmic scales.

DisplayPlotviewItemXaxisScale

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:PLOTVIEW<x>:XAXIS:SCALE command.

Description
  • This command sets or queries the horizontal scale setting for applicable plots (Linear or Log) for the specified plot view.
Usage
  • Using the .query() method will send the DISplay:PLOTVIEW<x>:XAXIS:SCALE? query.
  • Using the .verify(value) method will send the DISplay:PLOTVIEW<x>:XAXIS:SCALE? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:PLOTVIEW<x>:XAXIS:SCALE value command.
SCPI Syntax 
- DISplay:PLOTVIEW<x>:XAXIS:SCALE {LINEAR|LOG}
- DISplay:PLOTVIEW<x>:XAXIS:SCALE?
Info
  • PLOTView<x> is the Plot waveform number.
  • LINEAR creates a plot with linear scales.
  • LOG creates a plot with logarithmic scales.

DisplayPlotviewItemYaxis

Bases: SCPICmdRead

The DISplay:PLOTVIEW<x>:YAXIS command tree.

Usage
  • Using the .query() method will send the DISplay:PLOTVIEW<x>:YAXIS? query.
  • Using the .verify(value) method will send the DISplay:PLOTVIEW<x>:YAXIS? query and raise an AssertionError if the returned value does not match value.
Properties
  • .scale: The DISplay:PLOTVIEW<x>:YAXIS:SCALE command.

scale property 

scale: DisplayPlotviewItemYaxisScale

Return the DISplay:PLOTVIEW<x>:YAXIS:SCALE command.

Description
  • This command sets or queries the vertical scale setting for applicable plots (Linear or Log) in the specified plot view.
Usage
  • Using the .query() method will send the DISplay:PLOTVIEW<x>:YAXIS:SCALE? query.
  • Using the .verify(value) method will send the DISplay:PLOTVIEW<x>:YAXIS:SCALE? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:PLOTVIEW<x>:YAXIS:SCALE value command.
SCPI Syntax 
- DISplay:PLOTVIEW<x>:YAXIS:SCALE {LINEAR|LOG}
- DISplay:PLOTVIEW<x>:YAXIS:SCALE?
Info
  • PLOTView<x> is the Plot waveform number.
  • LINEAR specifies a linear vertical scale.
  • LOG specifies a logarithmic vertical scale.

DisplayPlotviewItemYaxisScale

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:PLOTVIEW<x>:YAXIS:SCALE command.

Description
  • This command sets or queries the vertical scale setting for applicable plots (Linear or Log) in the specified plot view.
Usage
  • Using the .query() method will send the DISplay:PLOTVIEW<x>:YAXIS:SCALE? query.
  • Using the .verify(value) method will send the DISplay:PLOTVIEW<x>:YAXIS:SCALE? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:PLOTVIEW<x>:YAXIS:SCALE value command.
SCPI Syntax 
- DISplay:PLOTVIEW<x>:YAXIS:SCALE {LINEAR|LOG}
- DISplay:PLOTVIEW<x>:YAXIS:SCALE?
Info
  • PLOTView<x> is the Plot waveform number.
  • LINEAR specifies a linear vertical scale.
  • LOG specifies a logarithmic vertical scale.

DisplayRefItem

Bases: ValidatedDynamicNumberCmd, SCPICmdRead

The DISplay:REF<x> command tree.

Usage
  • Using the .query() method will send the DISplay:REF<x>? query.
  • Using the .verify(value) method will send the DISplay:REF<x>? query and raise an AssertionError if the returned value does not match value.
Info
  • REF<x> specifies the reference waveform for which you want to change the waveform color, where is the reference waveform number.
Properties
  • .invertcolor: The DISplay:REF<x>:INVERTColor command.
  • .normalcolor: The DISplay:REF<x>:NORMALColor command.

invertcolor property 

invertcolor: DisplayRefItemInvertcolor

Return the DISplay:REF<x>:INVERTColor command.

Description
  • This command sets or queries the Inverted mode color of the specified input source to the specified color. You can assign one of 48 unique colors to any channel, math, or reference waveform. These colors replace the default Inverted colors and remain in effect until you reset the colors.
Usage
  • Using the .query() method will send the DISplay:REF<x>:INVERTColor? query.
  • Using the .verify(value) method will send the DISplay:REF<x>:INVERTColor? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:REF<x>:INVERTColor value command.
SCPI Syntax 
- DISplay:REF<x>:INVERTColor COLOR<y>
- DISplay:REF<x>:INVERTColor?
Info
  • REF<x> specifies the reference waveform for which you want to change the waveform color, where is the reference waveform number.
  • COLOR<y> specifies the color to assign to the specified waveform, where = 0 to 47.

normalcolor property 

normalcolor: DisplayRefItemNormalcolor

Return the DISplay:REF<x>:NORMALColor command.

Description
  • This command sets or queries the normal mode color of the specified input source to the specified color. You can assign one of 48 unique colors to any channel, math, or reference waveform. These colors replace the default normal colors and remain in effect until you reset the colors.
Usage
  • Using the .query() method will send the DISplay:REF<x>:NORMALColor? query.
  • Using the .verify(value) method will send the DISplay:REF<x>:NORMALColor? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:REF<x>:NORMALColor value command.
SCPI Syntax 
- DISplay:REF<x>:NORMALColor COLOR<y>
- DISplay:REF<x>:NORMALColor?
Info
  • REF<x> specifies the reference waveform for which you want to change the waveform color, where is the reference waveform number.
  • COLOR<y> specifies the color to assign to the specified waveform, where = 0 to 47.

DisplayRefItemInvertcolor

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:REF<x>:INVERTColor command.

Description
  • This command sets or queries the Inverted mode color of the specified input source to the specified color. You can assign one of 48 unique colors to any channel, math, or reference waveform. These colors replace the default Inverted colors and remain in effect until you reset the colors.
Usage
  • Using the .query() method will send the DISplay:REF<x>:INVERTColor? query.
  • Using the .verify(value) method will send the DISplay:REF<x>:INVERTColor? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:REF<x>:INVERTColor value command.
SCPI Syntax 
- DISplay:REF<x>:INVERTColor COLOR<y>
- DISplay:REF<x>:INVERTColor?
Info
  • REF<x> specifies the reference waveform for which you want to change the waveform color, where is the reference waveform number.
  • COLOR<y> specifies the color to assign to the specified waveform, where = 0 to 47.

DisplayRefItemNormalcolor

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:REF<x>:NORMALColor command.

Description
  • This command sets or queries the normal mode color of the specified input source to the specified color. You can assign one of 48 unique colors to any channel, math, or reference waveform. These colors replace the default normal colors and remain in effect until you reset the colors.
Usage
  • Using the .query() method will send the DISplay:REF<x>:NORMALColor? query.
  • Using the .verify(value) method will send the DISplay:REF<x>:NORMALColor? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:REF<x>:NORMALColor value command.
SCPI Syntax 
- DISplay:REF<x>:NORMALColor COLOR<y>
- DISplay:REF<x>:NORMALColor?
Info
  • REF<x> specifies the reference waveform for which you want to change the waveform color, where is the reference waveform number.
  • COLOR<y> specifies the color to assign to the specified waveform, where = 0 to 47.

DisplayReffftviewItem

Bases: ValidatedDynamicNumberCmd, SCPICmdRead

The DISplay:REFFFTView<x> command tree.

Usage
  • Using the .query() method will send the DISplay:REFFFTView<x>? query.
  • Using the .verify(value) method will send the DISplay:REFFFTView<x>? query and raise an AssertionError if the returned value does not match value.
Info
  • REFFFTView<x> is the Reference FFT plot number.
Properties
  • .autoscale: The DISplay:REFFFTView<x>:AUTOScale command.
  • .cursor: The DISplay:REFFFTView<x>:CURSor command tree.
  • .gridlines: The DISplay:REFFFTView<x>:GRIDlines command.
  • .ref: The DISplay:REFFFTView<x>:REF command tree.
  • .xaxis: The DISplay:REFFFTView<x>:XAXIS command tree.
  • .zoom: The DISplay:REFFFTView<x>:ZOOM command tree.

autoscale property 

autoscale: DisplayReffftviewItemAutoscale

Return the DISplay:REFFFTView<x>:AUTOScale command.

Description
  • This command sets or queries the enabled state of auto-scale for plots.
Usage
  • Using the .query() method will send the DISplay:REFFFTView<x>:AUTOScale? query.
  • Using the .verify(value) method will send the DISplay:REFFFTView<x>:AUTOScale? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:REFFFTView<x>:AUTOScale value command.
SCPI Syntax 
- DISplay:REFFFTView<x>:AUTOScale {OFF|ON|0|1|<NR1>}
- DISplay:REFFFTView<x>:AUTOScale?
Info
  • REFFFTView<x> is the Reference FFT plot number.
  • OFF disables auto-scale on the specified reffftview.
  • 0 disables auto-scale on the specified reffftview.
  • ON enables the specified channel on the specified Waveform View.
  • 1 enables the specified channel on the specified Waveform View.

cursor property 

cursor: DisplayReffftviewItemCursor

Return the DISplay:REFFFTView<x>:CURSor command tree.

Usage
  • Using the .query() method will send the DISplay:REFFFTView<x>:CURSor? query.
  • Using the .verify(value) method will send the DISplay:REFFFTView<x>:CURSor? query and raise an AssertionError if the returned value does not match value.
Info
  • REFFFTView<x> is the Reference FFT plot number.
Sub-properties
  • .asource: The DISplay:REFFFTView<x>:CURSor:ASOUrce command.
  • .bsource: The DISplay:REFFFTView<x>:CURSor:BSOUrce command.
  • .ddt: The DISplay:REFFFTView<x>:CURSor:DDT command.
  • .function: The DISplay:REFFFTView<x>:CURSor:FUNCtion command.
  • .hbars: The DISplay:REFFFTView<x>:CURSor:HBArs command tree.
  • .mode: The DISplay:REFFFTView<x>:CURSor:MODe command.
  • .oneoverdeltatvalue: The DISplay:REFFFTView<x>:CURSor:ONEOVERDELTATVALUE command.
  • .rolocation: The DISplay:REFFFTView<x>:CURSor:ROLOCATION command.
  • .screen: The DISplay:REFFFTView<x>:CURSor:SCREEN command tree.
  • .splitmode: The DISplay:REFFFTView<x>:CURSor:SPLITMODE command.
  • .state: The DISplay:REFFFTView<x>:CURSor:STATE command.
  • .vbars: The DISplay:REFFFTView<x>:CURSor:VBArs command tree.
  • .waveform: The DISplay:REFFFTView<x>:CURSor:WAVEform command tree.

gridlines property 

gridlines: DisplayReffftviewItemGridlines

Return the DISplay:REFFFTView<x>:GRIDlines command.

Description
  • This command sets or returns the grid lines setting of the plot.
Usage
  • Using the .query() method will send the DISplay:REFFFTView<x>:GRIDlines? query.
  • Using the .verify(value) method will send the DISplay:REFFFTView<x>:GRIDlines? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:REFFFTView<x>:GRIDlines value command.
SCPI Syntax 
- DISplay:REFFFTView<x>:GRIDlines {HORizontal|VERTical|BOTH}
- DISplay:REFFFTView<x>:GRIDlines?
Info
  • REFFFTView<x> is the Reference FFT plot number.
  • HORizontal specifies horizontal grid lines.
  • VERTical specifies vertical grid lines.
  • BOTH specifies both horizontal and vertical grid lines.

ref property 

ref: DisplayReffftviewItemRef

Return the DISplay:REFFFTView<x>:REF command tree.

Usage
  • Using the .query() method will send the DISplay:REFFFTView<x>:REF? query.
  • Using the .verify(value) method will send the DISplay:REFFFTView<x>:REF? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .ref: The DISplay:REFFFTView<x>:REF:REF<x> command tree.

xaxis property 

xaxis: DisplayReffftviewItemXaxis

Return the DISplay:REFFFTView<x>:XAXIS command tree.

Usage
  • Using the .query() method will send the DISplay:REFFFTView<x>:XAXIS? query.
  • Using the .verify(value) method will send the DISplay:REFFFTView<x>:XAXIS? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .scale: The DISplay:REFFFTView<x>:XAXIS:SCALE command.

zoom property 

zoom: DisplayReffftviewItemZoom

Return the DISplay:REFFFTView<x>:ZOOM command tree.

Usage
  • Using the .query() method will send the DISplay:REFFFTView<x>:ZOOM? query.
  • Using the .verify(value) method will send the DISplay:REFFFTView<x>:ZOOM? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .xaxis: The DISplay:REFFFTView<x>:ZOOM:XAXIS command tree.
  • .yaxis: The DISplay:REFFFTView<x>:ZOOM:YAXIS command tree.

DisplayReffftviewItemAutoscale

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:REFFFTView<x>:AUTOScale command.

Description
  • This command sets or queries the enabled state of auto-scale for plots.
Usage
  • Using the .query() method will send the DISplay:REFFFTView<x>:AUTOScale? query.
  • Using the .verify(value) method will send the DISplay:REFFFTView<x>:AUTOScale? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:REFFFTView<x>:AUTOScale value command.
SCPI Syntax 
- DISplay:REFFFTView<x>:AUTOScale {OFF|ON|0|1|<NR1>}
- DISplay:REFFFTView<x>:AUTOScale?
Info
  • REFFFTView<x> is the Reference FFT plot number.
  • OFF disables auto-scale on the specified reffftview.
  • 0 disables auto-scale on the specified reffftview.
  • ON enables the specified channel on the specified Waveform View.
  • 1 enables the specified channel on the specified Waveform View.

DisplayReffftviewItemCursor

Bases: SCPICmdRead

The DISplay:REFFFTView<x>:CURSor command tree.

Usage
  • Using the .query() method will send the DISplay:REFFFTView<x>:CURSor? query.
  • Using the .verify(value) method will send the DISplay:REFFFTView<x>:CURSor? query and raise an AssertionError if the returned value does not match value.
Info
  • REFFFTView<x> is the Reference FFT plot number.
Properties
  • .asource: The DISplay:REFFFTView<x>:CURSor:ASOUrce command.
  • .bsource: The DISplay:REFFFTView<x>:CURSor:BSOUrce command.
  • .ddt: The DISplay:REFFFTView<x>:CURSor:DDT command.
  • .function: The DISplay:REFFFTView<x>:CURSor:FUNCtion command.
  • .hbars: The DISplay:REFFFTView<x>:CURSor:HBArs command tree.
  • .mode: The DISplay:REFFFTView<x>:CURSor:MODe command.
  • .oneoverdeltatvalue: The DISplay:REFFFTView<x>:CURSor:ONEOVERDELTATVALUE command.
  • .rolocation: The DISplay:REFFFTView<x>:CURSor:ROLOCATION command.
  • .screen: The DISplay:REFFFTView<x>:CURSor:SCREEN command tree.
  • .splitmode: The DISplay:REFFFTView<x>:CURSor:SPLITMODE command.
  • .state: The DISplay:REFFFTView<x>:CURSor:STATE command.
  • .vbars: The DISplay:REFFFTView<x>:CURSor:VBArs command tree.
  • .waveform: The DISplay:REFFFTView<x>:CURSor:WAVEform command tree.

asource property 

asource: DisplayReffftviewItemCursorAsource

Return the DISplay:REFFFTView<x>:CURSor:ASOUrce command.

Description
  • This command returns the cursor source for plot cursor A
Usage
  • Using the .query() method will send the DISplay:REFFFTView<x>:CURSor:ASOUrce? query.
  • Using the .verify(value) method will send the DISplay:REFFFTView<x>:CURSor:ASOUrce? query and raise an AssertionError if the returned value does not match value.
SCPI Syntax 
- DISplay:REFFFTView<x>:CURSor:ASOUrce?
Info
  • REFFFTView<x> is the Reference FFT plot number.

bsource property 

bsource: DisplayReffftviewItemCursorBsource

Return the DISplay:REFFFTView<x>:CURSor:BSOUrce command.

Description
  • This command returns the cursor source for plot cursor B.
Usage
  • Using the .query() method will send the DISplay:REFFFTView<x>:CURSor:BSOUrce? query.
  • Using the .verify(value) method will send the DISplay:REFFFTView<x>:CURSor:BSOUrce? query and raise an AssertionError if the returned value does not match value.
SCPI Syntax 
- DISplay:REFFFTView<x>:CURSor:BSOUrce?
Info
  • REFFFTView<x> is the Reference FFT plot number.

ddt property 

ddt: DisplayReffftviewItemCursorDdt

Return the DISplay:REFFFTView<x>:CURSor:DDT command.

Description
  • This command returns the delta V over delta T cursor readout value of the specified cursor in the specified view.
Usage
  • Using the .query() method will send the DISplay:REFFFTView<x>:CURSor:DDT? query.
  • Using the .verify(value) method will send the DISplay:REFFFTView<x>:CURSor:DDT? query and raise an AssertionError if the returned value does not match value.
SCPI Syntax 
- DISplay:REFFFTView<x>:CURSor:DDT?
Info
  • REFFFTView<x> is the Reference FFT plot number.

function property 

function: DisplayReffftviewItemCursorFunction

Return the DISplay:REFFFTView<x>:CURSor:FUNCtion command.

Description
  • This command sets or queries the cursor type of the specified cursor in the specified view.
Usage
  • Using the .query() method will send the DISplay:REFFFTView<x>:CURSor:FUNCtion? query.
  • Using the .verify(value) method will send the DISplay:REFFFTView<x>:CURSor:FUNCtion? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:REFFFTView<x>:CURSor:FUNCtion value command.
SCPI Syntax 
- DISplay:REFFFTView<x>:CURSor:FUNCtion {WAVEform|VBArs|HBArs|SCREEN}
- DISplay:REFFFTView<x>:CURSor:FUNCtion?
Info
  • REFFFTView<x> is the Reference FFT plot number.
  • HBArs specifies horizontal bar cursors, which measure in vertical units.
  • VBArs specifies vertical bar cursors, which measure in horizontal units.
  • SCREEN specifies both horizontal and vertical bar cursors, which measure in horizontal and vertical units specified by the cursor sources. Use these cursors to measure anywhere in the waveform display area.
  • WAVEform specifies paired or split cursors in YT display format for measuring waveform amplitude and time. In XY and XYZ format, these cursors indicate the amplitude positions of an XY pair (Ch1 vs Ch2 voltage, where Ch1 is the X axis and Ch2 is the Y axis) relative to the trigger.

hbars property 

hbars: DisplayReffftviewItemCursorHbars

Return the DISplay:REFFFTView<x>:CURSor:HBArs command tree.

Usage
  • Using the .query() method will send the DISplay:REFFFTView<x>:CURSor:HBArs? query.
  • Using the .verify(value) method will send the DISplay:REFFFTView<x>:CURSor:HBArs? query and raise an AssertionError if the returned value does not match value.
Info
  • REFFFTView<x> is the Reference FFT plot number.
Sub-properties
  • .aposition: The DISplay:REFFFTView<x>:CURSor:HBArs:APOSition command.
  • .aunits: The DISplay:REFFFTView<x>:CURSor:HBArs:AUNIts command.
  • .bposition: The DISplay:REFFFTView<x>:CURSor:HBArs:BPOSition command.
  • .bunits: The DISplay:REFFFTView<x>:CURSor:HBArs:BUNIts command.
  • .delta: The DISplay:REFFFTView<x>:CURSor:HBArs:DELTa command.

mode property 

mode: DisplayReffftviewItemCursorMode

Return the DISplay:REFFFTView<x>:CURSor:MODe command.

Description
  • This command sets or queries the cursor tracking mode of the specified cursor in the specified view.
Usage
  • Using the .query() method will send the DISplay:REFFFTView<x>:CURSor:MODe? query.
  • Using the .verify(value) method will send the DISplay:REFFFTView<x>:CURSor:MODe? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:REFFFTView<x>:CURSor:MODe value command.
SCPI Syntax 
- DISplay:REFFFTView<x>:CURSor:MODe {INDEPENDENT|TRACK}
- DISplay:REFFFTView<x>:CURSor:MODe?
Info
  • REFFFTView<x> is the Reference FFT plot number.
  • TRACK ties the navigational functionality of the two cursors together. For cursor A adjustments, this ties the movement of the two cursors together; however, cursor B continues to move independently of cursor A.
  • INDEPENDENT allows independent adjustment of the two cursors.

oneoverdeltatvalue property 

oneoverdeltatvalue: DisplayReffftviewItemCursorOneoverdeltatvalue

Return the DISplay:REFFFTView<x>:CURSor:ONEOVERDELTATVALUE command.

Description
  • This command returns the one over delta T cursor readout value of the specified cursor in the specified view.
Usage
  • Using the .query() method will send the DISplay:REFFFTView<x>:CURSor:ONEOVERDELTATVALUE? query.
  • Using the .verify(value) method will send the DISplay:REFFFTView<x>:CURSor:ONEOVERDELTATVALUE? query and raise an AssertionError if the returned value does not match value.
SCPI Syntax 
- DISplay:REFFFTView<x>:CURSor:ONEOVERDELTATVALUE?
Info
  • REFFFTView<x> is the Reference FFT plot number.

rolocation property 

rolocation: DisplayReffftviewItemCursorRolocation

Return the DISplay:REFFFTView<x>:CURSor:ROLOCATION command.

Description
  • This command sets or queries the location to display the specified Reference FFT plot cursor readouts (in the plot graticule or in a badge in the Results Bar).
Usage
  • Using the .query() method will send the DISplay:REFFFTView<x>:CURSor:ROLOCATION? query.
  • Using the .verify(value) method will send the DISplay:REFFFTView<x>:CURSor:ROLOCATION? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:REFFFTView<x>:CURSor:ROLOCATION value command.
SCPI Syntax 
- DISplay:REFFFTView<x>:CURSor:ROLOCATION {GRATICULE|BADGE}
- DISplay:REFFFTView<x>:CURSor:ROLOCATION?
Info
  • REFFFTView<x> is the Reference FFT plot number.
  • GRATICULE sets the Reference FFT plot cursor readouts to display as part of the cursors in the plot view.
  • BADGE removes the Reference FFT plot cursor readouts from the cursors in the graticule and displays the cursor information as a badge in the Results Bar.

screen property 

screen: DisplayReffftviewItemCursorScreen

Return the DISplay:REFFFTView<x>:CURSor:SCREEN command tree.

Usage
  • Using the .query() method will send the DISplay:REFFFTView<x>:CURSor:SCREEN? query.
  • Using the .verify(value) method will send the DISplay:REFFFTView<x>:CURSor:SCREEN? query and raise an AssertionError if the returned value does not match value.
Info
  • REFFFTView<x> is the Reference FFT plot number.
Sub-properties
  • .axposition: The DISplay:REFFFTView<x>:CURSor:SCREEN:AXPOSition command.
  • .ayposition: The DISplay:REFFFTView<x>:CURSor:SCREEN:AYPOSition command.
  • .bxposition: The DISplay:REFFFTView<x>:CURSor:SCREEN:BXPOSition command.
  • .byposition: The DISplay:REFFFTView<x>:CURSor:SCREEN:BYPOSition command.

splitmode property 

splitmode: DisplayReffftviewItemCursorSplitmode

Return the DISplay:REFFFTView<x>:CURSor:SPLITMODE command.

Description
  • This command sets or queries whether both cursors have same or different source.
Usage
  • Using the .query() method will send the DISplay:REFFFTView<x>:CURSor:SPLITMODE? query.
  • Using the .verify(value) method will send the DISplay:REFFFTView<x>:CURSor:SPLITMODE? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:REFFFTView<x>:CURSor:SPLITMODE value command.
SCPI Syntax 
- DISplay:REFFFTView<x>:CURSor:SPLITMODE {SAME|SPLIT}
- DISplay:REFFFTView<x>:CURSor:SPLITMODE?
Info
  • REFFFTView<x> is the Reference FFT plot number.
  • SAME specifies both cursors have the same sources.
  • SPLIT specifies both cursors have different sources.

state property 

state: DisplayReffftviewItemCursorState

Return the DISplay:REFFFTView<x>:CURSor:STATE command.

Description
  • This command sets or queries the visible state of the cursor of the specified cursor n the specified view.
Usage
  • Using the .query() method will send the DISplay:REFFFTView<x>:CURSor:STATE? query.
  • Using the .verify(value) method will send the DISplay:REFFFTView<x>:CURSor:STATE? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:REFFFTView<x>:CURSor:STATE value command.
SCPI Syntax 
- DISplay:REFFFTView<x>:CURSor:STATE {ON|OFF|1|0}
- DISplay:REFFFTView<x>:CURSor:STATE?
Info
  • REFFFTView<x> is the Reference FFT plot number.
  • OFF specifies the cursor is not visible.
  • 0 specifies the cursor is not visible.
  • ON displays the cursor.
  • 1 displays the cursor.

vbars property 

vbars: DisplayReffftviewItemCursorVbars

Return the DISplay:REFFFTView<x>:CURSor:VBArs command tree.

Usage
  • Using the .query() method will send the DISplay:REFFFTView<x>:CURSor:VBArs? query.
  • Using the .verify(value) method will send the DISplay:REFFFTView<x>:CURSor:VBArs? query and raise an AssertionError if the returned value does not match value.
Info
  • REFFFTView<x> is the Reference FFT plot number.
Sub-properties
  • .aposition: The DISplay:REFFFTView<x>:CURSor:VBArs:APOSition command.
  • .bposition: The DISplay:REFFFTView<x>:CURSor:VBArs:BPOSition command.
  • .delta: The DISplay:REFFFTView<x>:CURSor:VBArs:DELTa command.
  • .units: The DISplay:REFFFTView<x>:CURSor:VBArs:UNIts command.

waveform property 

waveform: DisplayReffftviewItemCursorWaveform

Return the DISplay:REFFFTView<x>:CURSor:WAVEform command tree.

Usage
  • Using the .query() method will send the DISplay:REFFFTView<x>:CURSor:WAVEform? query.
  • Using the .verify(value) method will send the DISplay:REFFFTView<x>:CURSor:WAVEform? query and raise an AssertionError if the returned value does not match value.
Info
  • REFFFTView<x> is the Reference FFT plot number.
Sub-properties
  • .ahposition: The DISplay:REFFFTView<x>:CURSor:WAVEform:AHPOSition command.
  • .aposition: The DISplay:REFFFTView<x>:CURSor:WAVEform:APOSition command.
  • .avposition: The DISplay:REFFFTView<x>:CURSor:WAVEform:AVPOSition command.
  • .bhposition: The DISplay:REFFFTView<x>:CURSor:WAVEform:BHPOSition command.
  • .bposition: The DISplay:REFFFTView<x>:CURSor:WAVEform:BPOSition command.
  • .bvposition: The DISplay:REFFFTView<x>:CURSor:WAVEform:BVPOSition command.

DisplayReffftviewItemCursorAsource

Bases: SCPICmdRead

The DISplay:REFFFTView<x>:CURSor:ASOUrce command.

Description
  • This command returns the cursor source for plot cursor A
Usage
  • Using the .query() method will send the DISplay:REFFFTView<x>:CURSor:ASOUrce? query.
  • Using the .verify(value) method will send the DISplay:REFFFTView<x>:CURSor:ASOUrce? query and raise an AssertionError if the returned value does not match value.
SCPI Syntax 
- DISplay:REFFFTView<x>:CURSor:ASOUrce?
Info
  • REFFFTView<x> is the Reference FFT plot number.

DisplayReffftviewItemCursorBsource

Bases: SCPICmdRead

The DISplay:REFFFTView<x>:CURSor:BSOUrce command.

Description
  • This command returns the cursor source for plot cursor B.
Usage
  • Using the .query() method will send the DISplay:REFFFTView<x>:CURSor:BSOUrce? query.
  • Using the .verify(value) method will send the DISplay:REFFFTView<x>:CURSor:BSOUrce? query and raise an AssertionError if the returned value does not match value.
SCPI Syntax 
- DISplay:REFFFTView<x>:CURSor:BSOUrce?
Info
  • REFFFTView<x> is the Reference FFT plot number.

DisplayReffftviewItemCursorDdt

Bases: SCPICmdRead

The DISplay:REFFFTView<x>:CURSor:DDT command.

Description
  • This command returns the delta V over delta T cursor readout value of the specified cursor in the specified view.
Usage
  • Using the .query() method will send the DISplay:REFFFTView<x>:CURSor:DDT? query.
  • Using the .verify(value) method will send the DISplay:REFFFTView<x>:CURSor:DDT? query and raise an AssertionError if the returned value does not match value.
SCPI Syntax 
- DISplay:REFFFTView<x>:CURSor:DDT?
Info
  • REFFFTView<x> is the Reference FFT plot number.

DisplayReffftviewItemCursorFunction

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:REFFFTView<x>:CURSor:FUNCtion command.

Description
  • This command sets or queries the cursor type of the specified cursor in the specified view.
Usage
  • Using the .query() method will send the DISplay:REFFFTView<x>:CURSor:FUNCtion? query.
  • Using the .verify(value) method will send the DISplay:REFFFTView<x>:CURSor:FUNCtion? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:REFFFTView<x>:CURSor:FUNCtion value command.
SCPI Syntax 
- DISplay:REFFFTView<x>:CURSor:FUNCtion {WAVEform|VBArs|HBArs|SCREEN}
- DISplay:REFFFTView<x>:CURSor:FUNCtion?
Info
  • REFFFTView<x> is the Reference FFT plot number.
  • HBArs specifies horizontal bar cursors, which measure in vertical units.
  • VBArs specifies vertical bar cursors, which measure in horizontal units.
  • SCREEN specifies both horizontal and vertical bar cursors, which measure in horizontal and vertical units specified by the cursor sources. Use these cursors to measure anywhere in the waveform display area.
  • WAVEform specifies paired or split cursors in YT display format for measuring waveform amplitude and time. In XY and XYZ format, these cursors indicate the amplitude positions of an XY pair (Ch1 vs Ch2 voltage, where Ch1 is the X axis and Ch2 is the Y axis) relative to the trigger.

DisplayReffftviewItemCursorHbars

Bases: SCPICmdRead

The DISplay:REFFFTView<x>:CURSor:HBArs command tree.

Usage
  • Using the .query() method will send the DISplay:REFFFTView<x>:CURSor:HBArs? query.
  • Using the .verify(value) method will send the DISplay:REFFFTView<x>:CURSor:HBArs? query and raise an AssertionError if the returned value does not match value.
Info
  • REFFFTView<x> is the Reference FFT plot number.
Properties
  • .aposition: The DISplay:REFFFTView<x>:CURSor:HBArs:APOSition command.
  • .aunits: The DISplay:REFFFTView<x>:CURSor:HBArs:AUNIts command.
  • .bposition: The DISplay:REFFFTView<x>:CURSor:HBArs:BPOSition command.
  • .bunits: The DISplay:REFFFTView<x>:CURSor:HBArs:BUNIts command.
  • .delta: The DISplay:REFFFTView<x>:CURSor:HBArs:DELTa command.

aposition property 

aposition: DisplayReffftviewItemCursorHbarsAposition

Return the DISplay:REFFFTView<x>:CURSor:HBArs:APOSition command.

Description
  • This command sets or queries the vertical cursor A position of the specified cursor in the specified view.
Usage
  • Using the .query() method will send the DISplay:REFFFTView<x>:CURSor:HBArs:APOSition? query.
  • Using the .verify(value) method will send the DISplay:REFFFTView<x>:CURSor:HBArs:APOSition? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:REFFFTView<x>:CURSor:HBArs:APOSition value command.
SCPI Syntax 
- DISplay:REFFFTView<x>:CURSor:HBArs:APOSition <NR3>
- DISplay:REFFFTView<x>:CURSor:HBArs:APOSition?
Info
  • REFFFTView<x> is the Reference FFT plot number.
  • <NR3> is the vertical cursor A position of the specified cursor in the specified view.

aunits property 

aunits: DisplayReffftviewItemCursorHbarsAunits

Return the DISplay:REFFFTView<x>:CURSor:HBArs:AUNIts command.

Description
  • This command returns cursor A vertical units of the specified cursor in the specified view.
Usage
  • Using the .query() method will send the DISplay:REFFFTView<x>:CURSor:HBArs:AUNIts? query.
  • Using the .verify(value) method will send the DISplay:REFFFTView<x>:CURSor:HBArs:AUNIts? query and raise an AssertionError if the returned value does not match value.
SCPI Syntax 
- DISplay:REFFFTView<x>:CURSor:HBArs:AUNIts?
Info
  • REFFFTView<x> is the Reference FFT plot number.

bposition property 

bposition: DisplayReffftviewItemCursorHbarsBposition

Return the DISplay:REFFFTView<x>:CURSor:HBArs:BPOSition command.

Description
  • This command sets or queries the vertical cursor B position of the specified cursor in the specified view.
Usage
  • Using the .query() method will send the DISplay:REFFFTView<x>:CURSor:HBArs:BPOSition? query.
  • Using the .verify(value) method will send the DISplay:REFFFTView<x>:CURSor:HBArs:BPOSition? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:REFFFTView<x>:CURSor:HBArs:BPOSition value command.
SCPI Syntax 
- DISplay:REFFFTView<x>:CURSor:HBArs:BPOSition <NR3>
- DISplay:REFFFTView<x>:CURSor:HBArs:BPOSition?
Info
  • REFFFTView<x> is the Reference FFT plot number.
  • <NR3> is the vertical cursor B position of the specified cursor in the specified view.

bunits property 

bunits: DisplayReffftviewItemCursorHbarsBunits

Return the DISplay:REFFFTView<x>:CURSor:HBArs:BUNIts command.

Description
  • This command returns the cursor B vertical units of the specified cursor in the specified view.
Usage
  • Using the .query() method will send the DISplay:REFFFTView<x>:CURSor:HBArs:BUNIts? query.
  • Using the .verify(value) method will send the DISplay:REFFFTView<x>:CURSor:HBArs:BUNIts? query and raise an AssertionError if the returned value does not match value.
SCPI Syntax 
- DISplay:REFFFTView<x>:CURSor:HBArs:BUNIts?
Info
  • REFFFTView<x> is the Reference FFT plot number.

delta property 

delta: DisplayReffftviewItemCursorHbarsDelta

Return the DISplay:REFFFTView<x>:CURSor:HBArs:DELTa command.

Description
  • This command returns the delta V cursor readout value of the specified cursor in the specified view.
Usage
  • Using the .query() method will send the DISplay:REFFFTView<x>:CURSor:HBArs:DELTa? query.
  • Using the .verify(value) method will send the DISplay:REFFFTView<x>:CURSor:HBArs:DELTa? query and raise an AssertionError if the returned value does not match value.
SCPI Syntax 
- DISplay:REFFFTView<x>:CURSor:HBArs:DELTa?
Info
  • REFFFTView<x> is the Reference FFT plot number.

DisplayReffftviewItemCursorHbarsAposition

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:REFFFTView<x>:CURSor:HBArs:APOSition command.

Description
  • This command sets or queries the vertical cursor A position of the specified cursor in the specified view.
Usage
  • Using the .query() method will send the DISplay:REFFFTView<x>:CURSor:HBArs:APOSition? query.
  • Using the .verify(value) method will send the DISplay:REFFFTView<x>:CURSor:HBArs:APOSition? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:REFFFTView<x>:CURSor:HBArs:APOSition value command.
SCPI Syntax 
- DISplay:REFFFTView<x>:CURSor:HBArs:APOSition <NR3>
- DISplay:REFFFTView<x>:CURSor:HBArs:APOSition?
Info
  • REFFFTView<x> is the Reference FFT plot number.
  • <NR3> is the vertical cursor A position of the specified cursor in the specified view.

DisplayReffftviewItemCursorHbarsAunits

Bases: SCPICmdRead

The DISplay:REFFFTView<x>:CURSor:HBArs:AUNIts command.

Description
  • This command returns cursor A vertical units of the specified cursor in the specified view.
Usage
  • Using the .query() method will send the DISplay:REFFFTView<x>:CURSor:HBArs:AUNIts? query.
  • Using the .verify(value) method will send the DISplay:REFFFTView<x>:CURSor:HBArs:AUNIts? query and raise an AssertionError if the returned value does not match value.
SCPI Syntax 
- DISplay:REFFFTView<x>:CURSor:HBArs:AUNIts?
Info
  • REFFFTView<x> is the Reference FFT plot number.

DisplayReffftviewItemCursorHbarsBposition

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:REFFFTView<x>:CURSor:HBArs:BPOSition command.

Description
  • This command sets or queries the vertical cursor B position of the specified cursor in the specified view.
Usage
  • Using the .query() method will send the DISplay:REFFFTView<x>:CURSor:HBArs:BPOSition? query.
  • Using the .verify(value) method will send the DISplay:REFFFTView<x>:CURSor:HBArs:BPOSition? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:REFFFTView<x>:CURSor:HBArs:BPOSition value command.
SCPI Syntax 
- DISplay:REFFFTView<x>:CURSor:HBArs:BPOSition <NR3>
- DISplay:REFFFTView<x>:CURSor:HBArs:BPOSition?
Info
  • REFFFTView<x> is the Reference FFT plot number.
  • <NR3> is the vertical cursor B position of the specified cursor in the specified view.

DisplayReffftviewItemCursorHbarsBunits

Bases: SCPICmdRead

The DISplay:REFFFTView<x>:CURSor:HBArs:BUNIts command.

Description
  • This command returns the cursor B vertical units of the specified cursor in the specified view.
Usage
  • Using the .query() method will send the DISplay:REFFFTView<x>:CURSor:HBArs:BUNIts? query.
  • Using the .verify(value) method will send the DISplay:REFFFTView<x>:CURSor:HBArs:BUNIts? query and raise an AssertionError if the returned value does not match value.
SCPI Syntax 
- DISplay:REFFFTView<x>:CURSor:HBArs:BUNIts?
Info
  • REFFFTView<x> is the Reference FFT plot number.

DisplayReffftviewItemCursorHbarsDelta

Bases: SCPICmdRead

The DISplay:REFFFTView<x>:CURSor:HBArs:DELTa command.

Description
  • This command returns the delta V cursor readout value of the specified cursor in the specified view.
Usage
  • Using the .query() method will send the DISplay:REFFFTView<x>:CURSor:HBArs:DELTa? query.
  • Using the .verify(value) method will send the DISplay:REFFFTView<x>:CURSor:HBArs:DELTa? query and raise an AssertionError if the returned value does not match value.
SCPI Syntax 
- DISplay:REFFFTView<x>:CURSor:HBArs:DELTa?
Info
  • REFFFTView<x> is the Reference FFT plot number.

DisplayReffftviewItemCursorMode

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:REFFFTView<x>:CURSor:MODe command.

Description
  • This command sets or queries the cursor tracking mode of the specified cursor in the specified view.
Usage
  • Using the .query() method will send the DISplay:REFFFTView<x>:CURSor:MODe? query.
  • Using the .verify(value) method will send the DISplay:REFFFTView<x>:CURSor:MODe? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:REFFFTView<x>:CURSor:MODe value command.
SCPI Syntax 
- DISplay:REFFFTView<x>:CURSor:MODe {INDEPENDENT|TRACK}
- DISplay:REFFFTView<x>:CURSor:MODe?
Info
  • REFFFTView<x> is the Reference FFT plot number.
  • TRACK ties the navigational functionality of the two cursors together. For cursor A adjustments, this ties the movement of the two cursors together; however, cursor B continues to move independently of cursor A.
  • INDEPENDENT allows independent adjustment of the two cursors.

DisplayReffftviewItemCursorOneoverdeltatvalue

Bases: SCPICmdRead

The DISplay:REFFFTView<x>:CURSor:ONEOVERDELTATVALUE command.

Description
  • This command returns the one over delta T cursor readout value of the specified cursor in the specified view.
Usage
  • Using the .query() method will send the DISplay:REFFFTView<x>:CURSor:ONEOVERDELTATVALUE? query.
  • Using the .verify(value) method will send the DISplay:REFFFTView<x>:CURSor:ONEOVERDELTATVALUE? query and raise an AssertionError if the returned value does not match value.
SCPI Syntax 
- DISplay:REFFFTView<x>:CURSor:ONEOVERDELTATVALUE?
Info
  • REFFFTView<x> is the Reference FFT plot number.

DisplayReffftviewItemCursorRolocation

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:REFFFTView<x>:CURSor:ROLOCATION command.

Description
  • This command sets or queries the location to display the specified Reference FFT plot cursor readouts (in the plot graticule or in a badge in the Results Bar).
Usage
  • Using the .query() method will send the DISplay:REFFFTView<x>:CURSor:ROLOCATION? query.
  • Using the .verify(value) method will send the DISplay:REFFFTView<x>:CURSor:ROLOCATION? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:REFFFTView<x>:CURSor:ROLOCATION value command.
SCPI Syntax 
- DISplay:REFFFTView<x>:CURSor:ROLOCATION {GRATICULE|BADGE}
- DISplay:REFFFTView<x>:CURSor:ROLOCATION?
Info
  • REFFFTView<x> is the Reference FFT plot number.
  • GRATICULE sets the Reference FFT plot cursor readouts to display as part of the cursors in the plot view.
  • BADGE removes the Reference FFT plot cursor readouts from the cursors in the graticule and displays the cursor information as a badge in the Results Bar.

DisplayReffftviewItemCursorScreen

Bases: SCPICmdRead

The DISplay:REFFFTView<x>:CURSor:SCREEN command tree.

Usage
  • Using the .query() method will send the DISplay:REFFFTView<x>:CURSor:SCREEN? query.
  • Using the .verify(value) method will send the DISplay:REFFFTView<x>:CURSor:SCREEN? query and raise an AssertionError if the returned value does not match value.
Info
  • REFFFTView<x> is the Reference FFT plot number.
Properties
  • .axposition: The DISplay:REFFFTView<x>:CURSor:SCREEN:AXPOSition command.
  • .ayposition: The DISplay:REFFFTView<x>:CURSor:SCREEN:AYPOSition command.
  • .bxposition: The DISplay:REFFFTView<x>:CURSor:SCREEN:BXPOSition command.
  • .byposition: The DISplay:REFFFTView<x>:CURSor:SCREEN:BYPOSition command.

axposition property 

axposition: DisplayReffftviewItemCursorScreenAxposition

Return the DISplay:REFFFTView<x>:CURSor:SCREEN:AXPOSition command.

Description
  • This command sets or queries the horizontal cursor A position of the specified cursor in the specified view.
Usage
  • Using the .query() method will send the DISplay:REFFFTView<x>:CURSor:SCREEN:AXPOSition? query.
  • Using the .verify(value) method will send the DISplay:REFFFTView<x>:CURSor:SCREEN:AXPOSition? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:REFFFTView<x>:CURSor:SCREEN:AXPOSition value command.
SCPI Syntax 
- DISplay:REFFFTView<x>:CURSor:SCREEN:AXPOSition <NR3>
- DISplay:REFFFTView<x>:CURSor:SCREEN:AXPOSition?
Info
  • REFFFTView<x> is the Reference FFT plot number.
  • <NR3> is the horizontal cursor A position of the specified cursor in the specified view.

ayposition property 

ayposition: DisplayReffftviewItemCursorScreenAyposition

Return the DISplay:REFFFTView<x>:CURSor:SCREEN:AYPOSition command.

Description
  • This command sets or queries the vertical cursor A position of the specified cursor in the specified view.
Usage
  • Using the .query() method will send the DISplay:REFFFTView<x>:CURSor:SCREEN:AYPOSition? query.
  • Using the .verify(value) method will send the DISplay:REFFFTView<x>:CURSor:SCREEN:AYPOSition? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:REFFFTView<x>:CURSor:SCREEN:AYPOSition value command.
SCPI Syntax 
- DISplay:REFFFTView<x>:CURSor:SCREEN:AYPOSition <NR3>
- DISplay:REFFFTView<x>:CURSor:SCREEN:AYPOSition?
Info
  • REFFFTView<x> is the Reference FFT plot number.
  • <NR3> is the vertical cursor A position of the specified cursor in the specified view.

bxposition property 

bxposition: DisplayReffftviewItemCursorScreenBxposition

Return the DISplay:REFFFTView<x>:CURSor:SCREEN:BXPOSition command.

Description
  • This command sets or queries the horizontal cursor B position of the specified cursor in the specified view.
Usage
  • Using the .query() method will send the DISplay:REFFFTView<x>:CURSor:SCREEN:BXPOSition? query.
  • Using the .verify(value) method will send the DISplay:REFFFTView<x>:CURSor:SCREEN:BXPOSition? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:REFFFTView<x>:CURSor:SCREEN:BXPOSition value command.
SCPI Syntax 
- DISplay:REFFFTView<x>:CURSor:SCREEN:BXPOSition <NR3>
- DISplay:REFFFTView<x>:CURSor:SCREEN:BXPOSition?
Info
  • REFFFTView<x> is the Reference FFT plot number.
  • <NR3> is the horizontal cursor B position of the specified cursor in the specified view.

byposition property 

byposition: DisplayReffftviewItemCursorScreenByposition

Return the DISplay:REFFFTView<x>:CURSor:SCREEN:BYPOSition command.

Description
  • This command sets or queries the vertical cursor B position of the specified cursor in the specified view.
Usage
  • Using the .query() method will send the DISplay:REFFFTView<x>:CURSor:SCREEN:BYPOSition? query.
  • Using the .verify(value) method will send the DISplay:REFFFTView<x>:CURSor:SCREEN:BYPOSition? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:REFFFTView<x>:CURSor:SCREEN:BYPOSition value command.
SCPI Syntax 
- DISplay:REFFFTView<x>:CURSor:SCREEN:BYPOSition <NR3>
- DISplay:REFFFTView<x>:CURSor:SCREEN:BYPOSition?
Info
  • REFFFTView<x> is the Reference FFT plot number.
  • <NR3> is the vertical cursor B position of the specified cursor in the specified view.

DisplayReffftviewItemCursorScreenAxposition

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:REFFFTView<x>:CURSor:SCREEN:AXPOSition command.

Description
  • This command sets or queries the horizontal cursor A position of the specified cursor in the specified view.
Usage
  • Using the .query() method will send the DISplay:REFFFTView<x>:CURSor:SCREEN:AXPOSition? query.
  • Using the .verify(value) method will send the DISplay:REFFFTView<x>:CURSor:SCREEN:AXPOSition? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:REFFFTView<x>:CURSor:SCREEN:AXPOSition value command.
SCPI Syntax 
- DISplay:REFFFTView<x>:CURSor:SCREEN:AXPOSition <NR3>
- DISplay:REFFFTView<x>:CURSor:SCREEN:AXPOSition?
Info
  • REFFFTView<x> is the Reference FFT plot number.
  • <NR3> is the horizontal cursor A position of the specified cursor in the specified view.

DisplayReffftviewItemCursorScreenAyposition

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:REFFFTView<x>:CURSor:SCREEN:AYPOSition command.

Description
  • This command sets or queries the vertical cursor A position of the specified cursor in the specified view.
Usage
  • Using the .query() method will send the DISplay:REFFFTView<x>:CURSor:SCREEN:AYPOSition? query.
  • Using the .verify(value) method will send the DISplay:REFFFTView<x>:CURSor:SCREEN:AYPOSition? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:REFFFTView<x>:CURSor:SCREEN:AYPOSition value command.
SCPI Syntax 
- DISplay:REFFFTView<x>:CURSor:SCREEN:AYPOSition <NR3>
- DISplay:REFFFTView<x>:CURSor:SCREEN:AYPOSition?
Info
  • REFFFTView<x> is the Reference FFT plot number.
  • <NR3> is the vertical cursor A position of the specified cursor in the specified view.

DisplayReffftviewItemCursorScreenBxposition

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:REFFFTView<x>:CURSor:SCREEN:BXPOSition command.

Description
  • This command sets or queries the horizontal cursor B position of the specified cursor in the specified view.
Usage
  • Using the .query() method will send the DISplay:REFFFTView<x>:CURSor:SCREEN:BXPOSition? query.
  • Using the .verify(value) method will send the DISplay:REFFFTView<x>:CURSor:SCREEN:BXPOSition? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:REFFFTView<x>:CURSor:SCREEN:BXPOSition value command.
SCPI Syntax 
- DISplay:REFFFTView<x>:CURSor:SCREEN:BXPOSition <NR3>
- DISplay:REFFFTView<x>:CURSor:SCREEN:BXPOSition?
Info
  • REFFFTView<x> is the Reference FFT plot number.
  • <NR3> is the horizontal cursor B position of the specified cursor in the specified view.

DisplayReffftviewItemCursorScreenByposition

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:REFFFTView<x>:CURSor:SCREEN:BYPOSition command.

Description
  • This command sets or queries the vertical cursor B position of the specified cursor in the specified view.
Usage
  • Using the .query() method will send the DISplay:REFFFTView<x>:CURSor:SCREEN:BYPOSition? query.
  • Using the .verify(value) method will send the DISplay:REFFFTView<x>:CURSor:SCREEN:BYPOSition? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:REFFFTView<x>:CURSor:SCREEN:BYPOSition value command.
SCPI Syntax 
- DISplay:REFFFTView<x>:CURSor:SCREEN:BYPOSition <NR3>
- DISplay:REFFFTView<x>:CURSor:SCREEN:BYPOSition?
Info
  • REFFFTView<x> is the Reference FFT plot number.
  • <NR3> is the vertical cursor B position of the specified cursor in the specified view.

DisplayReffftviewItemCursorSplitmode

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:REFFFTView<x>:CURSor:SPLITMODE command.

Description
  • This command sets or queries whether both cursors have same or different source.
Usage
  • Using the .query() method will send the DISplay:REFFFTView<x>:CURSor:SPLITMODE? query.
  • Using the .verify(value) method will send the DISplay:REFFFTView<x>:CURSor:SPLITMODE? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:REFFFTView<x>:CURSor:SPLITMODE value command.
SCPI Syntax 
- DISplay:REFFFTView<x>:CURSor:SPLITMODE {SAME|SPLIT}
- DISplay:REFFFTView<x>:CURSor:SPLITMODE?
Info
  • REFFFTView<x> is the Reference FFT plot number.
  • SAME specifies both cursors have the same sources.
  • SPLIT specifies both cursors have different sources.

DisplayReffftviewItemCursorState

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:REFFFTView<x>:CURSor:STATE command.

Description
  • This command sets or queries the visible state of the cursor of the specified cursor n the specified view.
Usage
  • Using the .query() method will send the DISplay:REFFFTView<x>:CURSor:STATE? query.
  • Using the .verify(value) method will send the DISplay:REFFFTView<x>:CURSor:STATE? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:REFFFTView<x>:CURSor:STATE value command.
SCPI Syntax 
- DISplay:REFFFTView<x>:CURSor:STATE {ON|OFF|1|0}
- DISplay:REFFFTView<x>:CURSor:STATE?
Info
  • REFFFTView<x> is the Reference FFT plot number.
  • OFF specifies the cursor is not visible.
  • 0 specifies the cursor is not visible.
  • ON displays the cursor.
  • 1 displays the cursor.

DisplayReffftviewItemCursorVbars

Bases: SCPICmdRead

The DISplay:REFFFTView<x>:CURSor:VBArs command tree.

Usage
  • Using the .query() method will send the DISplay:REFFFTView<x>:CURSor:VBArs? query.
  • Using the .verify(value) method will send the DISplay:REFFFTView<x>:CURSor:VBArs? query and raise an AssertionError if the returned value does not match value.
Info
  • REFFFTView<x> is the Reference FFT plot number.
Properties
  • .aposition: The DISplay:REFFFTView<x>:CURSor:VBArs:APOSition command.
  • .bposition: The DISplay:REFFFTView<x>:CURSor:VBArs:BPOSition command.
  • .delta: The DISplay:REFFFTView<x>:CURSor:VBArs:DELTa command.
  • .units: The DISplay:REFFFTView<x>:CURSor:VBArs:UNIts command.

aposition property 

aposition: DisplayReffftviewItemCursorVbarsAposition

Return the DISplay:REFFFTView<x>:CURSor:VBArs:APOSition command.

Description
  • This command sets or queries the horizontal cursor A position of the specified cursor in the specified view.
Usage
  • Using the .query() method will send the DISplay:REFFFTView<x>:CURSor:VBArs:APOSition? query.
  • Using the .verify(value) method will send the DISplay:REFFFTView<x>:CURSor:VBArs:APOSition? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:REFFFTView<x>:CURSor:VBArs:APOSition value command.
SCPI Syntax 
- DISplay:REFFFTView<x>:CURSor:VBArs:APOSition <NR3>
- DISplay:REFFFTView<x>:CURSor:VBArs:APOSition?
Info
  • REFFFTView<x> is the Reference FFT plot number.
  • <NR3> is the horizontal cursor A position of the specified cursor in the specified view.

bposition property 

bposition: DisplayReffftviewItemCursorVbarsBposition

Return the DISplay:REFFFTView<x>:CURSor:VBArs:BPOSition command.

Description
  • This command sets or queries the horizontal cursor B position of the specified cursor in the specified view.
Usage
  • Using the .query() method will send the DISplay:REFFFTView<x>:CURSor:VBArs:BPOSition? query.
  • Using the .verify(value) method will send the DISplay:REFFFTView<x>:CURSor:VBArs:BPOSition? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:REFFFTView<x>:CURSor:VBArs:BPOSition value command.
SCPI Syntax 
- DISplay:REFFFTView<x>:CURSor:VBArs:BPOSition <NR3>
- DISplay:REFFFTView<x>:CURSor:VBArs:BPOSition?
Info
  • REFFFTView<x> is the Reference FFT plot number.
  • <NR3> is the horizontal cursor B position of the specified cursor in the specified view.

delta property 

delta: DisplayReffftviewItemCursorVbarsDelta

Return the DISplay:REFFFTView<x>:CURSor:VBArs:DELTa command.

Description
  • This command returns the delta T cursor readout value of the specified cursor in the specified view.
Usage
  • Using the .query() method will send the DISplay:REFFFTView<x>:CURSor:VBArs:DELTa? query.
  • Using the .verify(value) method will send the DISplay:REFFFTView<x>:CURSor:VBArs:DELTa? query and raise an AssertionError if the returned value does not match value.
SCPI Syntax 
- DISplay:REFFFTView<x>:CURSor:VBArs:DELTa?
Info
  • REFFFTView<x> is the Reference FFT plot number.

units property 

units: DisplayReffftviewItemCursorVbarsUnits

Return the DISplay:REFFFTView<x>:CURSor:VBArs:UNIts command.

Description
  • This command returns cursor A vertical units of the specified cursor in the specified view.
Usage
  • Using the .query() method will send the DISplay:REFFFTView<x>:CURSor:VBArs:UNIts? query.
  • Using the .verify(value) method will send the DISplay:REFFFTView<x>:CURSor:VBArs:UNIts? query and raise an AssertionError if the returned value does not match value.
SCPI Syntax 
- DISplay:REFFFTView<x>:CURSor:VBArs:UNIts?
Info
  • REFFFTView<x> is the Reference FFT plot number.

DisplayReffftviewItemCursorVbarsAposition

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:REFFFTView<x>:CURSor:VBArs:APOSition command.

Description
  • This command sets or queries the horizontal cursor A position of the specified cursor in the specified view.
Usage
  • Using the .query() method will send the DISplay:REFFFTView<x>:CURSor:VBArs:APOSition? query.
  • Using the .verify(value) method will send the DISplay:REFFFTView<x>:CURSor:VBArs:APOSition? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:REFFFTView<x>:CURSor:VBArs:APOSition value command.
SCPI Syntax 
- DISplay:REFFFTView<x>:CURSor:VBArs:APOSition <NR3>
- DISplay:REFFFTView<x>:CURSor:VBArs:APOSition?
Info
  • REFFFTView<x> is the Reference FFT plot number.
  • <NR3> is the horizontal cursor A position of the specified cursor in the specified view.

DisplayReffftviewItemCursorVbarsBposition

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:REFFFTView<x>:CURSor:VBArs:BPOSition command.

Description
  • This command sets or queries the horizontal cursor B position of the specified cursor in the specified view.
Usage
  • Using the .query() method will send the DISplay:REFFFTView<x>:CURSor:VBArs:BPOSition? query.
  • Using the .verify(value) method will send the DISplay:REFFFTView<x>:CURSor:VBArs:BPOSition? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:REFFFTView<x>:CURSor:VBArs:BPOSition value command.
SCPI Syntax 
- DISplay:REFFFTView<x>:CURSor:VBArs:BPOSition <NR3>
- DISplay:REFFFTView<x>:CURSor:VBArs:BPOSition?
Info
  • REFFFTView<x> is the Reference FFT plot number.
  • <NR3> is the horizontal cursor B position of the specified cursor in the specified view.

DisplayReffftviewItemCursorVbarsDelta

Bases: SCPICmdRead

The DISplay:REFFFTView<x>:CURSor:VBArs:DELTa command.

Description
  • This command returns the delta T cursor readout value of the specified cursor in the specified view.
Usage
  • Using the .query() method will send the DISplay:REFFFTView<x>:CURSor:VBArs:DELTa? query.
  • Using the .verify(value) method will send the DISplay:REFFFTView<x>:CURSor:VBArs:DELTa? query and raise an AssertionError if the returned value does not match value.
SCPI Syntax 
- DISplay:REFFFTView<x>:CURSor:VBArs:DELTa?
Info
  • REFFFTView<x> is the Reference FFT plot number.

DisplayReffftviewItemCursorVbarsUnits

Bases: SCPICmdRead

The DISplay:REFFFTView<x>:CURSor:VBArs:UNIts command.

Description
  • This command returns cursor A vertical units of the specified cursor in the specified view.
Usage
  • Using the .query() method will send the DISplay:REFFFTView<x>:CURSor:VBArs:UNIts? query.
  • Using the .verify(value) method will send the DISplay:REFFFTView<x>:CURSor:VBArs:UNIts? query and raise an AssertionError if the returned value does not match value.
SCPI Syntax 
- DISplay:REFFFTView<x>:CURSor:VBArs:UNIts?
Info
  • REFFFTView<x> is the Reference FFT plot number.

DisplayReffftviewItemCursorWaveform

Bases: SCPICmdRead

The DISplay:REFFFTView<x>:CURSor:WAVEform command tree.

Usage
  • Using the .query() method will send the DISplay:REFFFTView<x>:CURSor:WAVEform? query.
  • Using the .verify(value) method will send the DISplay:REFFFTView<x>:CURSor:WAVEform? query and raise an AssertionError if the returned value does not match value.
Info
  • REFFFTView<x> is the Reference FFT plot number.
Properties
  • .ahposition: The DISplay:REFFFTView<x>:CURSor:WAVEform:AHPOSition command.
  • .aposition: The DISplay:REFFFTView<x>:CURSor:WAVEform:APOSition command.
  • .avposition: The DISplay:REFFFTView<x>:CURSor:WAVEform:AVPOSition command.
  • .bhposition: The DISplay:REFFFTView<x>:CURSor:WAVEform:BHPOSition command.
  • .bposition: The DISplay:REFFFTView<x>:CURSor:WAVEform:BPOSition command.
  • .bvposition: The DISplay:REFFFTView<x>:CURSor:WAVEform:BVPOSition command.

ahposition property 

ahposition: DisplayReffftviewItemCursorWaveformAhposition

Return the DISplay:REFFFTView<x>:CURSor:WAVEform:AHPOSition command.

Description
  • This query-only command returns the value of the cursor A horizontal position.
Usage
  • Using the .query() method will send the DISplay:REFFFTView<x>:CURSor:WAVEform:AHPOSition? query.
  • Using the .verify(value) method will send the DISplay:REFFFTView<x>:CURSor:WAVEform:AHPOSition? query and raise an AssertionError if the returned value does not match value.
SCPI Syntax 
- DISplay:REFFFTView<x>:CURSor:WAVEform:AHPOSition?
Info
  • REFFFTView<x> is the Reference FFT plot number.

aposition property 

aposition: DisplayReffftviewItemCursorWaveformAposition

Return the DISplay:REFFFTView<x>:CURSor:WAVEform:APOSition command.

Description
  • Sets or returns the waveform cursor A position in the specified plot view.
Usage
  • Using the .query() method will send the DISplay:REFFFTView<x>:CURSor:WAVEform:APOSition? query.
  • Using the .verify(value) method will send the DISplay:REFFFTView<x>:CURSor:WAVEform:APOSition? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:REFFFTView<x>:CURSor:WAVEform:APOSition value command.
SCPI Syntax 
- DISplay:REFFFTView<x>:CURSor:WAVEform:APOSition <NR3>
- DISplay:REFFFTView<x>:CURSor:WAVEform:APOSition?
Info
  • REFFFTView<x> is the Reference FFT plot number.
  • <NR3> is the waveform cursor A position in the specified plot view.

avposition property 

avposition: DisplayReffftviewItemCursorWaveformAvposition

Return the DISplay:REFFFTView<x>:CURSor:WAVEform:AVPOSition command.

Description
  • This query-only command returns the value of the cursor A vertical position.
Usage
  • Using the .query() method will send the DISplay:REFFFTView<x>:CURSor:WAVEform:AVPOSition? query.
  • Using the .verify(value) method will send the DISplay:REFFFTView<x>:CURSor:WAVEform:AVPOSition? query and raise an AssertionError if the returned value does not match value.
SCPI Syntax 
- DISplay:REFFFTView<x>:CURSor:WAVEform:AVPOSition?
Info
  • REFFFTView<x> is the Reference FFT plot number.

bhposition property 

bhposition: DisplayReffftviewItemCursorWaveformBhposition

Return the DISplay:REFFFTView<x>:CURSor:WAVEform:BHPOSition command.

Description
  • This query-only command returns the value of the cursor B horizontal position.
Usage
  • Using the .query() method will send the DISplay:REFFFTView<x>:CURSor:WAVEform:BHPOSition? query.
  • Using the .verify(value) method will send the DISplay:REFFFTView<x>:CURSor:WAVEform:BHPOSition? query and raise an AssertionError if the returned value does not match value.
SCPI Syntax 
- DISplay:REFFFTView<x>:CURSor:WAVEform:BHPOSition?
Info
  • REFFFTView<x> is the Reference FFT plot number.

bposition property 

bposition: DisplayReffftviewItemCursorWaveformBposition

Return the DISplay:REFFFTView<x>:CURSor:WAVEform:BPOSition command.

Description
  • Sets or returns the waveform cursor B position in the specified plot view.
Usage
  • Using the .query() method will send the DISplay:REFFFTView<x>:CURSor:WAVEform:BPOSition? query.
  • Using the .verify(value) method will send the DISplay:REFFFTView<x>:CURSor:WAVEform:BPOSition? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:REFFFTView<x>:CURSor:WAVEform:BPOSition value command.
SCPI Syntax 
- DISplay:REFFFTView<x>:CURSor:WAVEform:BPOSition <NR3>
- DISplay:REFFFTView<x>:CURSor:WAVEform:BPOSition?
Info
  • REFFFTView<x> is the Reference FFT plot number.
  • <NR3> is the waveform cursor B position in the specified plot view.

bvposition property 

bvposition: DisplayReffftviewItemCursorWaveformBvposition

Return the DISplay:REFFFTView<x>:CURSor:WAVEform:BVPOSition command.

Description
  • This query-only command returns the value of the cursor B vertical position.
Usage
  • Using the .query() method will send the DISplay:REFFFTView<x>:CURSor:WAVEform:BVPOSition? query.
  • Using the .verify(value) method will send the DISplay:REFFFTView<x>:CURSor:WAVEform:BVPOSition? query and raise an AssertionError if the returned value does not match value.
SCPI Syntax 
- DISplay:REFFFTView<x>:CURSor:WAVEform:BVPOSition?
Info
  • REFFFTView<x> is the Reference FFT plot number.

DisplayReffftviewItemCursorWaveformAhposition

Bases: SCPICmdRead

The DISplay:REFFFTView<x>:CURSor:WAVEform:AHPOSition command.

Description
  • This query-only command returns the value of the cursor A horizontal position.
Usage
  • Using the .query() method will send the DISplay:REFFFTView<x>:CURSor:WAVEform:AHPOSition? query.
  • Using the .verify(value) method will send the DISplay:REFFFTView<x>:CURSor:WAVEform:AHPOSition? query and raise an AssertionError if the returned value does not match value.
SCPI Syntax 
- DISplay:REFFFTView<x>:CURSor:WAVEform:AHPOSition?
Info
  • REFFFTView<x> is the Reference FFT plot number.

DisplayReffftviewItemCursorWaveformAposition

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:REFFFTView<x>:CURSor:WAVEform:APOSition command.

Description
  • Sets or returns the waveform cursor A position in the specified plot view.
Usage
  • Using the .query() method will send the DISplay:REFFFTView<x>:CURSor:WAVEform:APOSition? query.
  • Using the .verify(value) method will send the DISplay:REFFFTView<x>:CURSor:WAVEform:APOSition? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:REFFFTView<x>:CURSor:WAVEform:APOSition value command.
SCPI Syntax 
- DISplay:REFFFTView<x>:CURSor:WAVEform:APOSition <NR3>
- DISplay:REFFFTView<x>:CURSor:WAVEform:APOSition?
Info
  • REFFFTView<x> is the Reference FFT plot number.
  • <NR3> is the waveform cursor A position in the specified plot view.

DisplayReffftviewItemCursorWaveformAvposition

Bases: SCPICmdRead

The DISplay:REFFFTView<x>:CURSor:WAVEform:AVPOSition command.

Description
  • This query-only command returns the value of the cursor A vertical position.
Usage
  • Using the .query() method will send the DISplay:REFFFTView<x>:CURSor:WAVEform:AVPOSition? query.
  • Using the .verify(value) method will send the DISplay:REFFFTView<x>:CURSor:WAVEform:AVPOSition? query and raise an AssertionError if the returned value does not match value.
SCPI Syntax 
- DISplay:REFFFTView<x>:CURSor:WAVEform:AVPOSition?
Info
  • REFFFTView<x> is the Reference FFT plot number.

DisplayReffftviewItemCursorWaveformBhposition

Bases: SCPICmdRead

The DISplay:REFFFTView<x>:CURSor:WAVEform:BHPOSition command.

Description
  • This query-only command returns the value of the cursor B horizontal position.
Usage
  • Using the .query() method will send the DISplay:REFFFTView<x>:CURSor:WAVEform:BHPOSition? query.
  • Using the .verify(value) method will send the DISplay:REFFFTView<x>:CURSor:WAVEform:BHPOSition? query and raise an AssertionError if the returned value does not match value.
SCPI Syntax 
- DISplay:REFFFTView<x>:CURSor:WAVEform:BHPOSition?
Info
  • REFFFTView<x> is the Reference FFT plot number.

DisplayReffftviewItemCursorWaveformBposition

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:REFFFTView<x>:CURSor:WAVEform:BPOSition command.

Description
  • Sets or returns the waveform cursor B position in the specified plot view.
Usage
  • Using the .query() method will send the DISplay:REFFFTView<x>:CURSor:WAVEform:BPOSition? query.
  • Using the .verify(value) method will send the DISplay:REFFFTView<x>:CURSor:WAVEform:BPOSition? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:REFFFTView<x>:CURSor:WAVEform:BPOSition value command.
SCPI Syntax 
- DISplay:REFFFTView<x>:CURSor:WAVEform:BPOSition <NR3>
- DISplay:REFFFTView<x>:CURSor:WAVEform:BPOSition?
Info
  • REFFFTView<x> is the Reference FFT plot number.
  • <NR3> is the waveform cursor B position in the specified plot view.

DisplayReffftviewItemCursorWaveformBvposition

Bases: SCPICmdRead

The DISplay:REFFFTView<x>:CURSor:WAVEform:BVPOSition command.

Description
  • This query-only command returns the value of the cursor B vertical position.
Usage
  • Using the .query() method will send the DISplay:REFFFTView<x>:CURSor:WAVEform:BVPOSition? query.
  • Using the .verify(value) method will send the DISplay:REFFFTView<x>:CURSor:WAVEform:BVPOSition? query and raise an AssertionError if the returned value does not match value.
SCPI Syntax 
- DISplay:REFFFTView<x>:CURSor:WAVEform:BVPOSition?
Info
  • REFFFTView<x> is the Reference FFT plot number.

DisplayReffftviewItemGridlines

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:REFFFTView<x>:GRIDlines command.

Description
  • This command sets or returns the grid lines setting of the plot.
Usage
  • Using the .query() method will send the DISplay:REFFFTView<x>:GRIDlines? query.
  • Using the .verify(value) method will send the DISplay:REFFFTView<x>:GRIDlines? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:REFFFTView<x>:GRIDlines value command.
SCPI Syntax 
- DISplay:REFFFTView<x>:GRIDlines {HORizontal|VERTical|BOTH}
- DISplay:REFFFTView<x>:GRIDlines?
Info
  • REFFFTView<x> is the Reference FFT plot number.
  • HORizontal specifies horizontal grid lines.
  • VERTical specifies vertical grid lines.
  • BOTH specifies both horizontal and vertical grid lines.

DisplayReffftviewItemRef

Bases: SCPICmdRead

The DISplay:REFFFTView<x>:REF command tree.

Usage
  • Using the .query() method will send the DISplay:REFFFTView<x>:REF? query.
  • Using the .verify(value) method will send the DISplay:REFFFTView<x>:REF? query and raise an AssertionError if the returned value does not match value.
Properties
  • .ref: The DISplay:REFFFTView<x>:REF:REF<x> command tree.

ref property 

ref: dict[int, DisplayReffftviewItemRefRefItem]

Return the DISplay:REFFFTView<x>:REF:REF<x> command tree.

Usage
  • Using the .query() method will send the DISplay:REFFFTView<x>:REF:REF<x>? query.
  • Using the .verify(value) method will send the DISplay:REFFFTView<x>:REF:REF<x>? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .state: The DISplay:REFFFTView<x>:REF:REF<x>:STATE command.

DisplayReffftviewItemRefRefItem

Bases: ValidatedDynamicNumberCmd, SCPICmdRead

The DISplay:REFFFTView<x>:REF:REF<x> command tree.

Usage
  • Using the .query() method will send the DISplay:REFFFTView<x>:REF:REF<x>? query.
  • Using the .verify(value) method will send the DISplay:REFFFTView<x>:REF:REF<x>? query and raise an AssertionError if the returned value does not match value.
Properties
  • .state: The DISplay:REFFFTView<x>:REF:REF<x>:STATE command.

state property 

state: DisplayReffftviewItemRefRefItemState

Return the DISplay:REFFFTView<x>:REF:REF<x>:STATE command.

Description
  • This command sets or queries the state of the specified reference waveform in the specified Waveform View.
Usage
  • Using the .query() method will send the DISplay:REFFFTView<x>:REF:REF<x>:STATE? query.
  • Using the .verify(value) method will send the DISplay:REFFFTView<x>:REF:REF<x>:STATE? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:REFFFTView<x>:REF:REF<x>:STATE value command.
SCPI Syntax 
- DISplay:REFFFTView<x>:REF:REF<x>:STATE boolean
- DISplay:REFFFTView<x>:REF:REF<x>:STATE?
Info
  • <NR1> = 0 disables the specified reference; any other value turns this feature on.
  • OFF disables the display the specified reference.
  • ON enables the specified reference.

DisplayReffftviewItemRefRefItemState

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:REFFFTView<x>:REF:REF<x>:STATE command.

Description
  • This command sets or queries the state of the specified reference waveform in the specified Waveform View.
Usage
  • Using the .query() method will send the DISplay:REFFFTView<x>:REF:REF<x>:STATE? query.
  • Using the .verify(value) method will send the DISplay:REFFFTView<x>:REF:REF<x>:STATE? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:REFFFTView<x>:REF:REF<x>:STATE value command.
SCPI Syntax 
- DISplay:REFFFTView<x>:REF:REF<x>:STATE boolean
- DISplay:REFFFTView<x>:REF:REF<x>:STATE?
Info
  • <NR1> = 0 disables the specified reference; any other value turns this feature on.
  • OFF disables the display the specified reference.
  • ON enables the specified reference.

DisplayReffftviewItemXaxis

Bases: SCPICmdRead

The DISplay:REFFFTView<x>:XAXIS command tree.

Usage
  • Using the .query() method will send the DISplay:REFFFTView<x>:XAXIS? query.
  • Using the .verify(value) method will send the DISplay:REFFFTView<x>:XAXIS? query and raise an AssertionError if the returned value does not match value.
Properties
  • .scale: The DISplay:REFFFTView<x>:XAXIS:SCALE command.

scale property 

scale: DisplayReffftviewItemXaxisScale

Return the DISplay:REFFFTView<x>:XAXIS:SCALE command.

Description
  • This command sets or queries the x-axis scale setting for Ref FFT.
Usage
  • Using the .query() method will send the DISplay:REFFFTView<x>:XAXIS:SCALE? query.
  • Using the .verify(value) method will send the DISplay:REFFFTView<x>:XAXIS:SCALE? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:REFFFTView<x>:XAXIS:SCALE value command.
SCPI Syntax 
- DISplay:REFFFTView<x>:XAXIS:SCALE {LINEAr|LOG}
- DISplay:REFFFTView<x>:XAXIS:SCALE?
Info
  • LINEAr specifies a linear scale.
  • LOG specifies a logarithmic scale.

DisplayReffftviewItemXaxisScale

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:REFFFTView<x>:XAXIS:SCALE command.

Description
  • This command sets or queries the x-axis scale setting for Ref FFT.
Usage
  • Using the .query() method will send the DISplay:REFFFTView<x>:XAXIS:SCALE? query.
  • Using the .verify(value) method will send the DISplay:REFFFTView<x>:XAXIS:SCALE? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:REFFFTView<x>:XAXIS:SCALE value command.
SCPI Syntax 
- DISplay:REFFFTView<x>:XAXIS:SCALE {LINEAr|LOG}
- DISplay:REFFFTView<x>:XAXIS:SCALE?
Info
  • LINEAr specifies a linear scale.
  • LOG specifies a logarithmic scale.

DisplayReffftviewItemZoom

Bases: SCPICmdRead

The DISplay:REFFFTView<x>:ZOOM command tree.

Usage
  • Using the .query() method will send the DISplay:REFFFTView<x>:ZOOM? query.
  • Using the .verify(value) method will send the DISplay:REFFFTView<x>:ZOOM? query and raise an AssertionError if the returned value does not match value.
Properties
  • .xaxis: The DISplay:REFFFTView<x>:ZOOM:XAXIS command tree.
  • .yaxis: The DISplay:REFFFTView<x>:ZOOM:YAXIS command tree.

xaxis property 

xaxis: DisplayReffftviewItemZoomXaxis

Return the DISplay:REFFFTView<x>:ZOOM:XAXIS command tree.

Usage
  • Using the .query() method will send the DISplay:REFFFTView<x>:ZOOM:XAXIS? query.
  • Using the .verify(value) method will send the DISplay:REFFFTView<x>:ZOOM:XAXIS? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .from: The DISplay:REFFFTView<x>:ZOOM:XAXIS:FROM command.
  • .to: The DISplay:REFFFTView<x>:ZOOM:XAXIS:TO command.

yaxis property 

yaxis: DisplayReffftviewItemZoomYaxis

Return the DISplay:REFFFTView<x>:ZOOM:YAXIS command tree.

Usage
  • Using the .query() method will send the DISplay:REFFFTView<x>:ZOOM:YAXIS? query.
  • Using the .verify(value) method will send the DISplay:REFFFTView<x>:ZOOM:YAXIS? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .from: The DISplay:REFFFTView<x>:ZOOM:YAXIS:FROM command.
  • .to: The DISplay:REFFFTView<x>:ZOOM:YAXIS:TO command.

DisplayReffftviewItemZoomXaxis

Bases: SCPICmdRead

The DISplay:REFFFTView<x>:ZOOM:XAXIS command tree.

Usage
  • Using the .query() method will send the DISplay:REFFFTView<x>:ZOOM:XAXIS? query.
  • Using the .verify(value) method will send the DISplay:REFFFTView<x>:ZOOM:XAXIS? query and raise an AssertionError if the returned value does not match value.
Properties
  • .from: The DISplay:REFFFTView<x>:ZOOM:XAXIS:FROM command.
  • .to: The DISplay:REFFFTView<x>:ZOOM:XAXIS:TO command.

from_ property 

from_: DisplayReffftviewItemZoomXaxisFrom

Return the DISplay:REFFFTView<x>:ZOOM:XAXIS:FROM command.

Description
  • This command sets or returns the left edge of the zoom x-axis in the specified plot view.
Usage
  • Using the .query() method will send the DISplay:REFFFTView<x>:ZOOM:XAXIS:FROM? query.
  • Using the .verify(value) method will send the DISplay:REFFFTView<x>:ZOOM:XAXIS:FROM? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:REFFFTView<x>:ZOOM:XAXIS:FROM value command.
SCPI Syntax 
- DISplay:REFFFTView<x>:ZOOM:XAXIS:FROM <NR3>
- DISplay:REFFFTView<x>:ZOOM:XAXIS:FROM?
Info
  • <NR3> is the left edge of the zoom x-axis in the specified plot view.

to property 

to: DisplayReffftviewItemZoomXaxisTo

Return the DISplay:REFFFTView<x>:ZOOM:XAXIS:TO command.

Description
  • This command sets or queries the right edge of the zoom x-axis in the specified plot view.
Usage
  • Using the .query() method will send the DISplay:REFFFTView<x>:ZOOM:XAXIS:TO? query.
  • Using the .verify(value) method will send the DISplay:REFFFTView<x>:ZOOM:XAXIS:TO? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:REFFFTView<x>:ZOOM:XAXIS:TO value command.
SCPI Syntax 
- DISplay:REFFFTView<x>:ZOOM:XAXIS:TO <NR3>
- DISplay:REFFFTView<x>:ZOOM:XAXIS:TO?
Info
  • <NR3> is the right edge of the zoom x-axis in the specified plot view.

DisplayReffftviewItemZoomXaxisFrom

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:REFFFTView<x>:ZOOM:XAXIS:FROM command.

Description
  • This command sets or returns the left edge of the zoom x-axis in the specified plot view.
Usage
  • Using the .query() method will send the DISplay:REFFFTView<x>:ZOOM:XAXIS:FROM? query.
  • Using the .verify(value) method will send the DISplay:REFFFTView<x>:ZOOM:XAXIS:FROM? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:REFFFTView<x>:ZOOM:XAXIS:FROM value command.
SCPI Syntax 
- DISplay:REFFFTView<x>:ZOOM:XAXIS:FROM <NR3>
- DISplay:REFFFTView<x>:ZOOM:XAXIS:FROM?
Info
  • <NR3> is the left edge of the zoom x-axis in the specified plot view.

DisplayReffftviewItemZoomXaxisTo

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:REFFFTView<x>:ZOOM:XAXIS:TO command.

Description
  • This command sets or queries the right edge of the zoom x-axis in the specified plot view.
Usage
  • Using the .query() method will send the DISplay:REFFFTView<x>:ZOOM:XAXIS:TO? query.
  • Using the .verify(value) method will send the DISplay:REFFFTView<x>:ZOOM:XAXIS:TO? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:REFFFTView<x>:ZOOM:XAXIS:TO value command.
SCPI Syntax 
- DISplay:REFFFTView<x>:ZOOM:XAXIS:TO <NR3>
- DISplay:REFFFTView<x>:ZOOM:XAXIS:TO?
Info
  • <NR3> is the right edge of the zoom x-axis in the specified plot view.

DisplayReffftviewItemZoomYaxis

Bases: SCPICmdRead

The DISplay:REFFFTView<x>:ZOOM:YAXIS command tree.

Usage
  • Using the .query() method will send the DISplay:REFFFTView<x>:ZOOM:YAXIS? query.
  • Using the .verify(value) method will send the DISplay:REFFFTView<x>:ZOOM:YAXIS? query and raise an AssertionError if the returned value does not match value.
Properties
  • .from: The DISplay:REFFFTView<x>:ZOOM:YAXIS:FROM command.
  • .to: The DISplay:REFFFTView<x>:ZOOM:YAXIS:TO command.

from_ property 

from_: DisplayReffftviewItemZoomYaxisFrom

Return the DISplay:REFFFTView<x>:ZOOM:YAXIS:FROM command.

Description
  • This command sets or queries the bottom value of the zoom y-axis in the specified plot view.
Usage
  • Using the .query() method will send the DISplay:REFFFTView<x>:ZOOM:YAXIS:FROM? query.
  • Using the .verify(value) method will send the DISplay:REFFFTView<x>:ZOOM:YAXIS:FROM? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:REFFFTView<x>:ZOOM:YAXIS:FROM value command.
SCPI Syntax 
- DISplay:REFFFTView<x>:ZOOM:YAXIS:FROM <NR3>
- DISplay:REFFFTView<x>:ZOOM:YAXIS:FROM?
Info
  • <NR3> is the bottom value of the zoom y-axis in the specified plot view.

to property 

to: DisplayReffftviewItemZoomYaxisTo

Return the DISplay:REFFFTView<x>:ZOOM:YAXIS:TO command.

Description
  • This command sets or queries the top value of the zoom y-axis in the specified plot view.
Usage
  • Using the .query() method will send the DISplay:REFFFTView<x>:ZOOM:YAXIS:TO? query.
  • Using the .verify(value) method will send the DISplay:REFFFTView<x>:ZOOM:YAXIS:TO? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:REFFFTView<x>:ZOOM:YAXIS:TO value command.
SCPI Syntax 
- DISplay:REFFFTView<x>:ZOOM:YAXIS:TO <NR3>
- DISplay:REFFFTView<x>:ZOOM:YAXIS:TO?
Info
  • <NR3> is the top value of the zoom y-axis in the specified plot view.

DisplayReffftviewItemZoomYaxisFrom

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:REFFFTView<x>:ZOOM:YAXIS:FROM command.

Description
  • This command sets or queries the bottom value of the zoom y-axis in the specified plot view.
Usage
  • Using the .query() method will send the DISplay:REFFFTView<x>:ZOOM:YAXIS:FROM? query.
  • Using the .verify(value) method will send the DISplay:REFFFTView<x>:ZOOM:YAXIS:FROM? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:REFFFTView<x>:ZOOM:YAXIS:FROM value command.
SCPI Syntax 
- DISplay:REFFFTView<x>:ZOOM:YAXIS:FROM <NR3>
- DISplay:REFFFTView<x>:ZOOM:YAXIS:FROM?
Info
  • <NR3> is the bottom value of the zoom y-axis in the specified plot view.

DisplayReffftviewItemZoomYaxisTo

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:REFFFTView<x>:ZOOM:YAXIS:TO command.

Description
  • This command sets or queries the top value of the zoom y-axis in the specified plot view.
Usage
  • Using the .query() method will send the DISplay:REFFFTView<x>:ZOOM:YAXIS:TO? query.
  • Using the .verify(value) method will send the DISplay:REFFFTView<x>:ZOOM:YAXIS:TO? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:REFFFTView<x>:ZOOM:YAXIS:TO value command.
SCPI Syntax 
- DISplay:REFFFTView<x>:ZOOM:YAXIS:TO <NR3>
- DISplay:REFFFTView<x>:ZOOM:YAXIS:TO?
Info
  • <NR3> is the top value of the zoom y-axis in the specified plot view.

DisplaySelect

Bases: SCPICmdRead

The DISplay:SELect command tree.

Usage
  • Using the .query() method will send the DISplay:SELect? query.
  • Using the .verify(value) method will send the DISplay:SELect? query and raise an AssertionError if the returned value does not match value.
Properties
  • .bus: The DISplay:SELect:BUS command.
  • .math: The DISplay:SELect:MATH command.
  • .reference: The DISplay:SELect:REFerence command.
  • .source: The DISplay:SELect:SOUrce command.
  • .specview1: The DISplay:SELect:SPECView1 command tree.
  • .view: The DISplay:SELect:VIEW command.
  • .waveview1: The DISplay:SELect:WAVEView1 command tree.

bus property 

bus: DisplaySelectBus

Return the DISplay:SELect:BUS command.

Description
  • This command sets or queries the overall selected bus. Sets are applied to all views that contain the source and the selected view is changed. When multiple buses are open, querying the command gives the correct result, but the bus cannot set.
Usage
  • Using the .query() method will send the DISplay:SELect:BUS? query.
  • Using the .verify(value) method will send the DISplay:SELect:BUS? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:SELect:BUS value command.
SCPI Syntax 
- DISplay:SELect:BUS BUS<x>
- DISplay:SELect:BUS?
Info
  • BUS<x> is the selected bus.

math property 

math: DisplaySelectMath

Return the DISplay:SELect:MATH command.

Description
  • This command sets or queries the overall selected math. Sets are applied to all views that contain the source and the selected view is changed. When multiple Math are open, querying the command gives the correct result, but the required Math cannot be set.
Usage
  • Using the .query() method will send the DISplay:SELect:MATH? query.
  • Using the .verify(value) method will send the DISplay:SELect:MATH? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:SELect:MATH value command.
SCPI Syntax 
- DISplay:SELect:MATH MATH<x>
- DISplay:SELect:MATH?
Info
  • MATH<x> is the selected math.

reference property 

reference: DisplaySelectReference

Return the DISplay:SELect:REFerence command.

Description
  • This command sets or queries the overall selected reference waveform. Sets are applied to all views that contain the source and the selected view is changed.
Usage
  • Using the .query() method will send the DISplay:SELect:REFerence? query.
  • Using the .verify(value) method will send the DISplay:SELect:REFerence? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:SELect:REFerence value command.
SCPI Syntax 
- DISplay:SELect:REFerence {NONE|REF<x>}
- DISplay:SELect:REFerence?
Info
  • NONE
  • REF<x> where x is the specified reference waveform.

source property 

source: DisplaySelectSource

Return the DISplay:SELect:SOUrce command.

Description
  • This command sets or queries the overall selected source. Sets are applied to all views that contain the source and the selected view is changed.
Usage
  • Using the .query() method will send the DISplay:SELect:SOUrce? query.
  • Using the .verify(value) method will send the DISplay:SELect:SOUrce? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:SELect:SOUrce value command.
SCPI Syntax 
- DISplay:SELect:SOUrce {NONE|CH<x>|BUS<x>|MATH<x>|PLOT<x>|REF<x>}
- DISplay:SELect:SOUrce?
Info
  • PLOT<x> specifies the plot as the source.
  • CH<x> specifies an analog channel as the source.
  • Math<x> specifies a math waveform as the source.
  • REF<x> specifies a reference waveform as the source.
  • NONE specifies nothing as the source.

specview1 property 

specview1: DisplaySelectSpecview1

Return the DISplay:SELect:SPECView1 command tree.

Usage
  • Using the .query() method will send the DISplay:SELect:SPECView1? query.
  • Using the .verify(value) method will send the DISplay:SELect:SPECView1? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .source: The DISplay:SELect:SPECView1:SOUrce command.

view property 

view: DisplaySelectView

Return the DISplay:SELect:VIEW command.

Description
  • This command sets or queries the selected view.
Usage
  • Using the .query() method will send the DISplay:SELect:VIEW? query.
  • Using the .verify(value) method will send the DISplay:SELect:VIEW? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:SELect:VIEW value command.
SCPI Syntax 
- DISplay:SELect:VIEW {WAVEVIEW1|MATHFFT<x>|PLOTVIEW<x>|REFFFT<x>}
- DISplay:SELect:VIEW?
Info
  • WAVEVIEW1
  • MATHFFT<x>
  • PLOTVIEW<x>
  • REFFFT<x>

waveview1 property 

waveview1: DisplaySelectWaveview1

Return the DISplay:SELect:WAVEView1 command tree.

Usage
  • Using the .query() method will send the DISplay:SELect:WAVEView1? query.
  • Using the .verify(value) method will send the DISplay:SELect:WAVEView1? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .source: The DISplay:SELect:WAVEView1:SOUrce command.

DisplaySelectBus

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:SELect:BUS command.

Description
  • This command sets or queries the overall selected bus. Sets are applied to all views that contain the source and the selected view is changed. When multiple buses are open, querying the command gives the correct result, but the bus cannot set.
Usage
  • Using the .query() method will send the DISplay:SELect:BUS? query.
  • Using the .verify(value) method will send the DISplay:SELect:BUS? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:SELect:BUS value command.
SCPI Syntax 
- DISplay:SELect:BUS BUS<x>
- DISplay:SELect:BUS?
Info
  • BUS<x> is the selected bus.

DisplaySelectMath

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:SELect:MATH command.

Description
  • This command sets or queries the overall selected math. Sets are applied to all views that contain the source and the selected view is changed. When multiple Math are open, querying the command gives the correct result, but the required Math cannot be set.
Usage
  • Using the .query() method will send the DISplay:SELect:MATH? query.
  • Using the .verify(value) method will send the DISplay:SELect:MATH? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:SELect:MATH value command.
SCPI Syntax 
- DISplay:SELect:MATH MATH<x>
- DISplay:SELect:MATH?
Info
  • MATH<x> is the selected math.

DisplaySelectReference

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:SELect:REFerence command.

Description
  • This command sets or queries the overall selected reference waveform. Sets are applied to all views that contain the source and the selected view is changed.
Usage
  • Using the .query() method will send the DISplay:SELect:REFerence? query.
  • Using the .verify(value) method will send the DISplay:SELect:REFerence? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:SELect:REFerence value command.
SCPI Syntax 
- DISplay:SELect:REFerence {NONE|REF<x>}
- DISplay:SELect:REFerence?
Info
  • NONE
  • REF<x> where x is the specified reference waveform.

DisplaySelectSource

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:SELect:SOUrce command.

Description
  • This command sets or queries the overall selected source. Sets are applied to all views that contain the source and the selected view is changed.
Usage
  • Using the .query() method will send the DISplay:SELect:SOUrce? query.
  • Using the .verify(value) method will send the DISplay:SELect:SOUrce? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:SELect:SOUrce value command.
SCPI Syntax 
- DISplay:SELect:SOUrce {NONE|CH<x>|BUS<x>|MATH<x>|PLOT<x>|REF<x>}
- DISplay:SELect:SOUrce?
Info
  • PLOT<x> specifies the plot as the source.
  • CH<x> specifies an analog channel as the source.
  • Math<x> specifies a math waveform as the source.
  • REF<x> specifies a reference waveform as the source.
  • NONE specifies nothing as the source.

DisplaySelectSpecview1

Bases: SCPICmdRead

The DISplay:SELect:SPECView1 command tree.

Usage
  • Using the .query() method will send the DISplay:SELect:SPECView1? query.
  • Using the .verify(value) method will send the DISplay:SELect:SPECView1? query and raise an AssertionError if the returned value does not match value.
Properties
  • .source: The DISplay:SELect:SPECView1:SOUrce command.

source property 

source: DisplaySelectSpecview1Source

Return the DISplay:SELect:SPECView1:SOUrce command.

Description
  • This command sets or queries the spectrum trace (source channel) to select in the Spectrum View window.
Usage
  • Using the .query() method will send the DISplay:SELect:SPECView1:SOUrce? query.
  • Using the .verify(value) method will send the DISplay:SELect:SPECView1:SOUrce? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:SELect:SPECView1:SOUrce value command.
SCPI Syntax 
- DISplay:SELect:SPECView1:SOUrce {CH<x>}
- DISplay:SELect:SPECView1:SOUrce?
Info
  • 1 specifies the Spectrum View number. is always 1.
  • CH<x> specifies the spectrum trace (source channel) to select (make active) in the Spectrum View.

DisplaySelectSpecview1Source

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:SELect:SPECView1:SOUrce command.

Description
  • This command sets or queries the spectrum trace (source channel) to select in the Spectrum View window.
Usage
  • Using the .query() method will send the DISplay:SELect:SPECView1:SOUrce? query.
  • Using the .verify(value) method will send the DISplay:SELect:SPECView1:SOUrce? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:SELect:SPECView1:SOUrce value command.
SCPI Syntax 
- DISplay:SELect:SPECView1:SOUrce {CH<x>}
- DISplay:SELect:SPECView1:SOUrce?
Info
  • 1 specifies the Spectrum View number. is always 1.
  • CH<x> specifies the spectrum trace (source channel) to select (make active) in the Spectrum View.

DisplaySelectView

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:SELect:VIEW command.

Description
  • This command sets or queries the selected view.
Usage
  • Using the .query() method will send the DISplay:SELect:VIEW? query.
  • Using the .verify(value) method will send the DISplay:SELect:VIEW? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:SELect:VIEW value command.
SCPI Syntax 
- DISplay:SELect:VIEW {WAVEVIEW1|MATHFFT<x>|PLOTVIEW<x>|REFFFT<x>}
- DISplay:SELect:VIEW?
Info
  • WAVEVIEW1
  • MATHFFT<x>
  • PLOTVIEW<x>
  • REFFFT<x>

DisplaySelectWaveview1

Bases: SCPICmdRead

The DISplay:SELect:WAVEView1 command tree.

Usage
  • Using the .query() method will send the DISplay:SELect:WAVEView1? query.
  • Using the .verify(value) method will send the DISplay:SELect:WAVEView1? query and raise an AssertionError if the returned value does not match value.
Properties
  • .source: The DISplay:SELect:WAVEView1:SOUrce command.

source property 

source: DisplaySelectWaveview1Source

Return the DISplay:SELect:WAVEView1:SOUrce command.

Description
  • This command sets or queries the selected source in the given waveview.
Usage
  • Using the .query() method will send the DISplay:SELect:WAVEView1:SOUrce? query.
  • Using the .verify(value) method will send the DISplay:SELect:WAVEView1:SOUrce? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:SELect:WAVEView1:SOUrce value command.
SCPI Syntax 
- DISplay:SELect:WAVEView1:SOUrce {S<x>_Ch<x>|CH<x>|MATH<x>|BUS<x>|REF<x>|PLOT<x>}
- DISplay:SELect:WAVEView1:SOUrce?
Info
  • S<x>_Ch<x> specifies the remote scope number and the analog channel as the source.
  • CH<x> specifies an analog channel as the source.
  • Math<x> specifies a math waveform as the source.
  • REF<x> specifies a reference waveform as the source.
  • PLOT<x> specifies a plot as the source.

DisplaySelectWaveview1Source

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:SELect:WAVEView1:SOUrce command.

Description
  • This command sets or queries the selected source in the given waveview.
Usage
  • Using the .query() method will send the DISplay:SELect:WAVEView1:SOUrce? query.
  • Using the .verify(value) method will send the DISplay:SELect:WAVEView1:SOUrce? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:SELect:WAVEView1:SOUrce value command.
SCPI Syntax 
- DISplay:SELect:WAVEView1:SOUrce {S<x>_Ch<x>|CH<x>|MATH<x>|BUS<x>|REF<x>|PLOT<x>}
- DISplay:SELect:WAVEView1:SOUrce?
Info
  • S<x>_Ch<x> specifies the remote scope number and the analog channel as the source.
  • CH<x> specifies an analog channel as the source.
  • Math<x> specifies a math waveform as the source.
  • REF<x> specifies a reference waveform as the source.
  • PLOT<x> specifies a plot as the source.

DisplaySpecview1

Bases: SCPICmdRead

The DISplay:SPECView1 command tree.

Usage
  • Using the .query() method will send the DISplay:SPECView1? query.
  • Using the .verify(value) method will send the DISplay:SPECView1? query and raise an AssertionError if the returned value does not match value.
Properties
  • .cursor: The DISplay:SPECView1:CURSor command tree.
  • .graticule: The DISplay:SPECView1:GRAticule command.
  • .horz: The DISplay:SPECView1:HORZ command.
  • .intensity: The DISplay:SPECView1:INTENSITy command tree.
  • .viewstyle: The DISplay:SPECView1:VIEWStyle command.

cursor property 

cursor: DisplaySpecview1Cursor

Return the DISplay:SPECView1:CURSor command tree.

Usage
  • Using the .query() method will send the DISplay:SPECView1:CURSor? query.
  • Using the .verify(value) method will send the DISplay:SPECView1:CURSor? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .cursor: The DISplay:SPECView1:CURSor:CURSOR command tree.

graticule property 

graticule: DisplaySpecview1Graticule

Return the DISplay:SPECView1:GRAticule command.

Description
  • This command sets or queries the type of graticule shown in the Spectrum View window. The same grid is used for all spectrum traces.
Usage
  • Using the .query() method will send the DISplay:SPECView1:GRAticule? query.
  • Using the .verify(value) method will send the DISplay:SPECView1:GRAticule? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:SPECView1:GRAticule value command.
SCPI Syntax 
- DISplay:SPECView1:GRAticule {GRId|TIMe|FULl|NONe}
- DISplay:SPECView1:GRAticule?
Info
  • 1 specifies the Spectrum View number. is always 1.
  • GRId specifies to show the Grid graticule (frame and grid) in the Spectrum View window.
  • TIMe specifies to show the Time graticule in the Spectrum View window.
  • FULl specifies to show the Full graticule (frame, a grid and cross hairs) in the Spectrum View window.
  • NONe specifies to show no graticule in the Spectrum View window.

horz property 

horz: DisplaySpecview1Horz

Return the DISplay:SPECView1:HORZ command.

Description
  • This command sets or queries the horizontal display scaling of the Spectrum View window.
Usage
  • Using the .query() method will send the DISplay:SPECView1:HORZ? query.
  • Using the .verify(value) method will send the DISplay:SPECView1:HORZ? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:SPECView1:HORZ value command.
SCPI Syntax 
- DISplay:SPECView1:HORZ {LOG|LINEAr}
- DISplay:SPECView1:HORZ?
Info
  • 1 specifies the Spectrum View number. is always 1.
  • LINEAr sets the Spectrum View horizontal scaling to linear.
  • LOG sets the Spectrum View horizontal scaling to log.

intensity property 

intensity: DisplaySpecview1Intensity

Return the DISplay:SPECView1:INTENSITy command tree.

Usage
  • Using the .query() method will send the DISplay:SPECView1:INTENSITy? query.
  • Using the .verify(value) method will send the DISplay:SPECView1:INTENSITy? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .graticule: The DISplay:SPECView1:INTENSITy:GRATicule command.
  • .waveform: The DISplay:SPECView1:INTENSITy:WAVEform command.

viewstyle property 

viewstyle: DisplaySpecview1Viewstyle

Return the DISplay:SPECView1:VIEWStyle command.

Description
  • This command sets or queries the spectrum trace layout style used by the Spectrum View window.
Usage
  • Using the .query() method will send the DISplay:SPECView1:VIEWStyle? query.
  • Using the .verify(value) method will send the DISplay:SPECView1:VIEWStyle? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:SPECView1:VIEWStyle value command.
SCPI Syntax 
- DISplay:SPECView1:VIEWStyle {OVErlay|STAcked}
- DISplay:SPECView1:VIEWStyle?
Info
  • 1 specifies the Spectrum View number. is always 1.
  • OVErlay specifies the Spectrum View window to show all spectrum traces drawn on top of each other.
  • STAcked specifies the Spectrum View window to show each spectrum trace in a separate horizontal slice.

DisplaySpecview1Cursor

Bases: SCPICmdRead

The DISplay:SPECView1:CURSor command tree.

Usage
  • Using the .query() method will send the DISplay:SPECView1:CURSor? query.
  • Using the .verify(value) method will send the DISplay:SPECView1:CURSor? query and raise an AssertionError if the returned value does not match value.
Properties
  • .cursor: The DISplay:SPECView1:CURSor:CURSOR command tree.

cursor property 

cursor: DisplaySpecview1CursorCursor

Return the DISplay:SPECView1:CURSor:CURSOR command tree.

Usage
  • Using the .query() method will send the DISplay:SPECView1:CURSor:CURSOR? query.
  • Using the .verify(value) method will send the DISplay:SPECView1:CURSor:CURSOR? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .anoisedensity: The DISplay:SPECView1:CURSor:CURSOR:ANOISEDensity command.
  • .asource: The DISplay:SPECView1:CURSor:CURSOR:ASOUrce command.
  • .bnoise: The DISplay:SPECView1:CURSor:CURSOR:BNOISE command.
  • .bsource: The DISplay:SPECView1:CURSor:CURSOR:BSOUrce command.
  • .hbars: The DISplay:SPECView1:CURSor:CURSOR:HBArs command tree.
  • .readout: The DISplay:SPECView1:CURSor:CURSOR:READout command.
  • .splitmode: The DISplay:SPECView1:CURSor:CURSOR:SPLITMODE command.
  • .state: The DISplay:SPECView1:CURSor:CURSOR:STATE command.
  • .vbars: The DISplay:SPECView1:CURSor:CURSOR:VBArs command tree.
  • .waveform: The DISplay:SPECView1:CURSor:CURSOR:WAVEform command tree.

DisplaySpecview1CursorCursor

Bases: SCPICmdRead

The DISplay:SPECView1:CURSor:CURSOR command tree.

Usage
  • Using the .query() method will send the DISplay:SPECView1:CURSor:CURSOR? query.
  • Using the .verify(value) method will send the DISplay:SPECView1:CURSor:CURSOR? query and raise an AssertionError if the returned value does not match value.
Properties
  • .anoisedensity: The DISplay:SPECView1:CURSor:CURSOR:ANOISEDensity command.
  • .asource: The DISplay:SPECView1:CURSor:CURSOR:ASOUrce command.
  • .bnoise: The DISplay:SPECView1:CURSor:CURSOR:BNOISE command.
  • .bsource: The DISplay:SPECView1:CURSor:CURSOR:BSOUrce command.
  • .hbars: The DISplay:SPECView1:CURSor:CURSOR:HBArs command tree.
  • .readout: The DISplay:SPECView1:CURSor:CURSOR:READout command.
  • .splitmode: The DISplay:SPECView1:CURSor:CURSOR:SPLITMODE command.
  • .state: The DISplay:SPECView1:CURSor:CURSOR:STATE command.
  • .vbars: The DISplay:SPECView1:CURSor:CURSOR:VBArs command tree.
  • .waveform: The DISplay:SPECView1:CURSor:CURSOR:WAVEform command tree.

anoisedensity property 

anoisedensity: DisplaySpecview1CursorCursorAnoisedensity

Return the DISplay:SPECView1:CURSor:CURSOR:ANOISEDensity command.

Description
  • Returns the noise density of the selected RF trace at the Cursor A position
Usage
  • Using the .query() method will send the DISplay:SPECView1:CURSor:CURSOR:ANOISEDensity? query.
  • Using the .verify(value) method will send the DISplay:SPECView1:CURSor:CURSOR:ANOISEDensity? query and raise an AssertionError if the returned value does not match value.
SCPI Syntax 
- DISplay:SPECView1:CURSor:CURSOR:ANOISEDensity?

asource property 

asource: DisplaySpecview1CursorCursorAsource

Return the DISplay:SPECView1:CURSor:CURSOR:ASOUrce command.

Description
  • This command sets or queries the Cursor A source in the Spectrum View.
Usage
  • Using the .query() method will send the DISplay:SPECView1:CURSor:CURSOR:ASOUrce? query.
  • Using the .verify(value) method will send the DISplay:SPECView1:CURSor:CURSOR:ASOUrce? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:SPECView1:CURSor:CURSOR:ASOUrce value command.
SCPI Syntax 
- DISplay:SPECView1:CURSor:CURSOR:ASOUrce {AUTO|CH<x>}
- DISplay:SPECView1:CURSor:CURSOR:ASOUrce?
Info
  • 1 specifies the Spectrum View number. is always 1.
  • AUTO specifies to use the selected analog channel as the Spectrum View source.
  • CH<x> specifies the analog channel to use as the Spectrum View source.

bnoise property 

bnoise: DisplaySpecview1CursorCursorBnoise

Return the DISplay:SPECView1:CURSor:CURSOR:BNOISE command.

Description
  • Returns the noise density of the selected RF trace at the Cursor B position when in Absolute mode, or the phase noise when in Delta mode.
Usage
  • Using the .query() method will send the DISplay:SPECView1:CURSor:CURSOR:BNOISE? query.
  • Using the .verify(value) method will send the DISplay:SPECView1:CURSor:CURSOR:BNOISE? query and raise an AssertionError if the returned value does not match value.
SCPI Syntax 
- DISplay:SPECView1:CURSor:CURSOR:BNOISE?

bsource property 

bsource: DisplaySpecview1CursorCursorBsource

Return the DISplay:SPECView1:CURSor:CURSOR:BSOUrce command.

Description
  • This command sets or queries the Cursor B source in the Spectrum View.
Usage
  • Using the .query() method will send the DISplay:SPECView1:CURSor:CURSOR:BSOUrce? query.
  • Using the .verify(value) method will send the DISplay:SPECView1:CURSor:CURSOR:BSOUrce? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:SPECView1:CURSor:CURSOR:BSOUrce value command.
SCPI Syntax 
- DISplay:SPECView1:CURSor:CURSOR:BSOUrce {AUTO|CH<x>}
- DISplay:SPECView1:CURSor:CURSOR:BSOUrce?
Info
  • 1 specifies the Spectrum View number. is always 1.
  • AUTO specifies to use the selected analog channel as the Spectrum View source.
  • CH<x> specifies the analog channel to use as the Spectrum View source.

hbars property 

hbars: DisplaySpecview1CursorCursorHbars

Return the DISplay:SPECView1:CURSor:CURSOR:HBArs command tree.

Usage
  • Using the .query() method will send the DISplay:SPECView1:CURSor:CURSOR:HBArs? query.
  • Using the .verify(value) method will send the DISplay:SPECView1:CURSor:CURSOR:HBArs? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .aposition: The DISplay:SPECView1:CURSor:CURSOR:HBArs:APOSition command.
  • .aunits: The DISplay:SPECView1:CURSor:CURSOR:HBArs:AUNIts command.
  • .bposition: The DISplay:SPECView1:CURSor:CURSOR:HBArs:BPOSition command.
  • .bunits: The DISplay:SPECView1:CURSor:CURSOR:HBArs:BUNIts command.

readout property 

readout: DisplaySpecview1CursorCursorReadout

Return the DISplay:SPECView1:CURSor:CURSOR:READout command.

Description
  • This command sets or queries the Cursor B readout type in the Spectrum View.
Usage
  • Using the .query() method will send the DISplay:SPECView1:CURSor:CURSOR:READout? query.
  • Using the .verify(value) method will send the DISplay:SPECView1:CURSor:CURSOR:READout? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:SPECView1:CURSor:CURSOR:READout value command.
SCPI Syntax 
- DISplay:SPECView1:CURSor:CURSOR:READout {ABSOLUTE|DELTA}
- DISplay:SPECView1:CURSor:CURSOR:READout?
Info
  • 1 specifies the Spectrum View number. is always 1.
  • ABSOLUTE specifies the Cursor B readout displays absolute frequency and amplitude.
  • DELTA specifies the Cursor B readout displays delta frequency and amplitude from Cursor A.

splitmode property 

splitmode: DisplaySpecview1CursorCursorSplitmode

Return the DISplay:SPECView1:CURSor:CURSOR:SPLITMODE command.

Description
  • This command sets or queries whether both Spectrum View cursors have the same or different sources.
Usage
  • Using the .query() method will send the DISplay:SPECView1:CURSor:CURSOR:SPLITMODE? query.
  • Using the .verify(value) method will send the DISplay:SPECView1:CURSor:CURSOR:SPLITMODE? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:SPECView1:CURSor:CURSOR:SPLITMODE value command.
SCPI Syntax 
- DISplay:SPECView1:CURSor:CURSOR:SPLITMODE {SAME|SPLIT}
- DISplay:SPECView1:CURSor:CURSOR:SPLITMODE?
Info
  • 1 specifies the Spectrum View number. is always 1.
  • SAME specifies that both Spectrum View cursors have the same source.
  • SPLIT specifies that both Spectrum View cursors have independent sources.

state property 

state: DisplaySpecview1CursorCursorState

Return the DISplay:SPECView1:CURSor:CURSOR:STATE command.

Description
  • This command sets or queries the visibility state of the cursors in the Spectrum View.
Usage
  • Using the .query() method will send the DISplay:SPECView1:CURSor:CURSOR:STATE? query.
  • Using the .verify(value) method will send the DISplay:SPECView1:CURSor:CURSOR:STATE? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:SPECView1:CURSor:CURSOR:STATE value command.
SCPI Syntax 
- DISplay:SPECView1:CURSor:CURSOR:STATE {ON|OFF}
- DISplay:SPECView1:CURSor:CURSOR:STATE?
Info
  • 1 specifies the Spectrum View number. is always 1.
  • ON enables viewing cursors in the Spectrum View.
  • OFF disables viewing cursors in the Spectrum View.

vbars property 

vbars: DisplaySpecview1CursorCursorVbars

Return the DISplay:SPECView1:CURSor:CURSOR:VBArs command tree.

Usage
  • Using the .query() method will send the DISplay:SPECView1:CURSor:CURSOR:VBArs? query.
  • Using the .verify(value) method will send the DISplay:SPECView1:CURSor:CURSOR:VBArs? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .aposition: The DISplay:SPECView1:CURSor:CURSOR:VBArs:APOSition command.
  • .bposition: The DISplay:SPECView1:CURSor:CURSOR:VBArs:BPOSition command.
  • .units: The DISplay:SPECView1:CURSor:CURSOR:VBArs:UNIts command.

waveform property 

waveform: DisplaySpecview1CursorCursorWaveform

Return the DISplay:SPECView1:CURSor:CURSOR:WAVEform command tree.

Usage
  • Using the .query() method will send the DISplay:SPECView1:CURSor:CURSOR:WAVEform? query.
  • Using the .verify(value) method will send the DISplay:SPECView1:CURSor:CURSOR:WAVEform? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .aposition: The DISplay:SPECView1:CURSor:CURSOR:WAVEform:APOSition command.
  • .bposition: The DISplay:SPECView1:CURSor:CURSOR:WAVEform:BPOSition command.

DisplaySpecview1CursorCursorAnoisedensity

Bases: SCPICmdRead

The DISplay:SPECView1:CURSor:CURSOR:ANOISEDensity command.

Description
  • Returns the noise density of the selected RF trace at the Cursor A position
Usage
  • Using the .query() method will send the DISplay:SPECView1:CURSor:CURSOR:ANOISEDensity? query.
  • Using the .verify(value) method will send the DISplay:SPECView1:CURSor:CURSOR:ANOISEDensity? query and raise an AssertionError if the returned value does not match value.
SCPI Syntax 
- DISplay:SPECView1:CURSor:CURSOR:ANOISEDensity?

DisplaySpecview1CursorCursorAsource

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:SPECView1:CURSor:CURSOR:ASOUrce command.

Description
  • This command sets or queries the Cursor A source in the Spectrum View.
Usage
  • Using the .query() method will send the DISplay:SPECView1:CURSor:CURSOR:ASOUrce? query.
  • Using the .verify(value) method will send the DISplay:SPECView1:CURSor:CURSOR:ASOUrce? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:SPECView1:CURSor:CURSOR:ASOUrce value command.
SCPI Syntax 
- DISplay:SPECView1:CURSor:CURSOR:ASOUrce {AUTO|CH<x>}
- DISplay:SPECView1:CURSor:CURSOR:ASOUrce?
Info
  • 1 specifies the Spectrum View number. is always 1.
  • AUTO specifies to use the selected analog channel as the Spectrum View source.
  • CH<x> specifies the analog channel to use as the Spectrum View source.

DisplaySpecview1CursorCursorBnoise

Bases: SCPICmdRead

The DISplay:SPECView1:CURSor:CURSOR:BNOISE command.

Description
  • Returns the noise density of the selected RF trace at the Cursor B position when in Absolute mode, or the phase noise when in Delta mode.
Usage
  • Using the .query() method will send the DISplay:SPECView1:CURSor:CURSOR:BNOISE? query.
  • Using the .verify(value) method will send the DISplay:SPECView1:CURSor:CURSOR:BNOISE? query and raise an AssertionError if the returned value does not match value.
SCPI Syntax 
- DISplay:SPECView1:CURSor:CURSOR:BNOISE?

DisplaySpecview1CursorCursorBsource

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:SPECView1:CURSor:CURSOR:BSOUrce command.

Description
  • This command sets or queries the Cursor B source in the Spectrum View.
Usage
  • Using the .query() method will send the DISplay:SPECView1:CURSor:CURSOR:BSOUrce? query.
  • Using the .verify(value) method will send the DISplay:SPECView1:CURSor:CURSOR:BSOUrce? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:SPECView1:CURSor:CURSOR:BSOUrce value command.
SCPI Syntax 
- DISplay:SPECView1:CURSor:CURSOR:BSOUrce {AUTO|CH<x>}
- DISplay:SPECView1:CURSor:CURSOR:BSOUrce?
Info
  • 1 specifies the Spectrum View number. is always 1.
  • AUTO specifies to use the selected analog channel as the Spectrum View source.
  • CH<x> specifies the analog channel to use as the Spectrum View source.

DisplaySpecview1CursorCursorHbars

Bases: SCPICmdRead

The DISplay:SPECView1:CURSor:CURSOR:HBArs command tree.

Usage
  • Using the .query() method will send the DISplay:SPECView1:CURSor:CURSOR:HBArs? query.
  • Using the .verify(value) method will send the DISplay:SPECView1:CURSor:CURSOR:HBArs? query and raise an AssertionError if the returned value does not match value.
Properties
  • .aposition: The DISplay:SPECView1:CURSor:CURSOR:HBArs:APOSition command.
  • .aunits: The DISplay:SPECView1:CURSor:CURSOR:HBArs:AUNIts command.
  • .bposition: The DISplay:SPECView1:CURSor:CURSOR:HBArs:BPOSition command.
  • .bunits: The DISplay:SPECView1:CURSor:CURSOR:HBArs:BUNIts command.

aposition property 

aposition: DisplaySpecview1CursorCursorHbarsAposition

Return the DISplay:SPECView1:CURSor:CURSOR:HBArs:APOSition command.

Description
  • This command queries the Cursor A horizontal bar’s vertical position (where it crosses the spectrum signal) in the Spectrum View.
Usage
  • Using the .query() method will send the DISplay:SPECView1:CURSor:CURSOR:HBArs:APOSition? query.
  • Using the .verify(value) method will send the DISplay:SPECView1:CURSor:CURSOR:HBArs:APOSition? query and raise an AssertionError if the returned value does not match value.
SCPI Syntax 
- DISplay:SPECView1:CURSor:CURSOR:HBArs:APOSition?
Info
  • 1 specifies the Spectrum View number. is always 1.

aunits property 

aunits: DisplaySpecview1CursorCursorHbarsAunits

Return the DISplay:SPECView1:CURSor:CURSOR:HBArs:AUNIts command.

Description
  • This command queries the horizontal bar Cursor A horizontal bar’s amplitude units in the Spectrum View.
Usage
  • Using the .query() method will send the DISplay:SPECView1:CURSor:CURSOR:HBArs:AUNIts? query.
  • Using the .verify(value) method will send the DISplay:SPECView1:CURSor:CURSOR:HBArs:AUNIts? query and raise an AssertionError if the returned value does not match value.
SCPI Syntax 
- DISplay:SPECView1:CURSor:CURSOR:HBArs:AUNIts?
Info
  • 1 specifies the Spectrum View number. is always 1.

bposition property 

bposition: DisplaySpecview1CursorCursorHbarsBposition

Return the DISplay:SPECView1:CURSor:CURSOR:HBArs:BPOSition command.

Description
  • This command queries the horizontal bar Cursor B horizontal bar’s vertical position (where it crosses the spectrum signal) in the Spectrum View.
Usage
  • Using the .query() method will send the DISplay:SPECView1:CURSor:CURSOR:HBArs:BPOSition? query.
  • Using the .verify(value) method will send the DISplay:SPECView1:CURSor:CURSOR:HBArs:BPOSition? query and raise an AssertionError if the returned value does not match value.
SCPI Syntax 
- DISplay:SPECView1:CURSor:CURSOR:HBArs:BPOSition?
Info
  • 1 specifies the Spectrum View number. is always 1.

bunits property 

bunits: DisplaySpecview1CursorCursorHbarsBunits

Return the DISplay:SPECView1:CURSor:CURSOR:HBArs:BUNIts command.

Description
  • This command queries the Cursor B horizontal bar’s amplitude units in the Spectrum View.
Usage
  • Using the .query() method will send the DISplay:SPECView1:CURSor:CURSOR:HBArs:BUNIts? query.
  • Using the .verify(value) method will send the DISplay:SPECView1:CURSor:CURSOR:HBArs:BUNIts? query and raise an AssertionError if the returned value does not match value.
SCPI Syntax 
- DISplay:SPECView1:CURSor:CURSOR:HBArs:BUNIts?
Info
  • 1 specifies the Spectrum View number. is always 1.

DisplaySpecview1CursorCursorHbarsAposition

Bases: SCPICmdRead

The DISplay:SPECView1:CURSor:CURSOR:HBArs:APOSition command.

Description
  • This command queries the Cursor A horizontal bar’s vertical position (where it crosses the spectrum signal) in the Spectrum View.
Usage
  • Using the .query() method will send the DISplay:SPECView1:CURSor:CURSOR:HBArs:APOSition? query.
  • Using the .verify(value) method will send the DISplay:SPECView1:CURSor:CURSOR:HBArs:APOSition? query and raise an AssertionError if the returned value does not match value.
SCPI Syntax 
- DISplay:SPECView1:CURSor:CURSOR:HBArs:APOSition?
Info
  • 1 specifies the Spectrum View number. is always 1.

DisplaySpecview1CursorCursorHbarsAunits

Bases: SCPICmdRead

The DISplay:SPECView1:CURSor:CURSOR:HBArs:AUNIts command.

Description
  • This command queries the horizontal bar Cursor A horizontal bar’s amplitude units in the Spectrum View.
Usage
  • Using the .query() method will send the DISplay:SPECView1:CURSor:CURSOR:HBArs:AUNIts? query.
  • Using the .verify(value) method will send the DISplay:SPECView1:CURSor:CURSOR:HBArs:AUNIts? query and raise an AssertionError if the returned value does not match value.
SCPI Syntax 
- DISplay:SPECView1:CURSor:CURSOR:HBArs:AUNIts?
Info
  • 1 specifies the Spectrum View number. is always 1.

DisplaySpecview1CursorCursorHbarsBposition

Bases: SCPICmdRead

The DISplay:SPECView1:CURSor:CURSOR:HBArs:BPOSition command.

Description
  • This command queries the horizontal bar Cursor B horizontal bar’s vertical position (where it crosses the spectrum signal) in the Spectrum View.
Usage
  • Using the .query() method will send the DISplay:SPECView1:CURSor:CURSOR:HBArs:BPOSition? query.
  • Using the .verify(value) method will send the DISplay:SPECView1:CURSor:CURSOR:HBArs:BPOSition? query and raise an AssertionError if the returned value does not match value.
SCPI Syntax 
- DISplay:SPECView1:CURSor:CURSOR:HBArs:BPOSition?
Info
  • 1 specifies the Spectrum View number. is always 1.

DisplaySpecview1CursorCursorHbarsBunits

Bases: SCPICmdRead

The DISplay:SPECView1:CURSor:CURSOR:HBArs:BUNIts command.

Description
  • This command queries the Cursor B horizontal bar’s amplitude units in the Spectrum View.
Usage
  • Using the .query() method will send the DISplay:SPECView1:CURSor:CURSOR:HBArs:BUNIts? query.
  • Using the .verify(value) method will send the DISplay:SPECView1:CURSor:CURSOR:HBArs:BUNIts? query and raise an AssertionError if the returned value does not match value.
SCPI Syntax 
- DISplay:SPECView1:CURSor:CURSOR:HBArs:BUNIts?
Info
  • 1 specifies the Spectrum View number. is always 1.

DisplaySpecview1CursorCursorReadout

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:SPECView1:CURSor:CURSOR:READout command.

Description
  • This command sets or queries the Cursor B readout type in the Spectrum View.
Usage
  • Using the .query() method will send the DISplay:SPECView1:CURSor:CURSOR:READout? query.
  • Using the .verify(value) method will send the DISplay:SPECView1:CURSor:CURSOR:READout? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:SPECView1:CURSor:CURSOR:READout value command.
SCPI Syntax 
- DISplay:SPECView1:CURSor:CURSOR:READout {ABSOLUTE|DELTA}
- DISplay:SPECView1:CURSor:CURSOR:READout?
Info
  • 1 specifies the Spectrum View number. is always 1.
  • ABSOLUTE specifies the Cursor B readout displays absolute frequency and amplitude.
  • DELTA specifies the Cursor B readout displays delta frequency and amplitude from Cursor A.

DisplaySpecview1CursorCursorSplitmode

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:SPECView1:CURSor:CURSOR:SPLITMODE command.

Description
  • This command sets or queries whether both Spectrum View cursors have the same or different sources.
Usage
  • Using the .query() method will send the DISplay:SPECView1:CURSor:CURSOR:SPLITMODE? query.
  • Using the .verify(value) method will send the DISplay:SPECView1:CURSor:CURSOR:SPLITMODE? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:SPECView1:CURSor:CURSOR:SPLITMODE value command.
SCPI Syntax 
- DISplay:SPECView1:CURSor:CURSOR:SPLITMODE {SAME|SPLIT}
- DISplay:SPECView1:CURSor:CURSOR:SPLITMODE?
Info
  • 1 specifies the Spectrum View number. is always 1.
  • SAME specifies that both Spectrum View cursors have the same source.
  • SPLIT specifies that both Spectrum View cursors have independent sources.

DisplaySpecview1CursorCursorState

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:SPECView1:CURSor:CURSOR:STATE command.

Description
  • This command sets or queries the visibility state of the cursors in the Spectrum View.
Usage
  • Using the .query() method will send the DISplay:SPECView1:CURSor:CURSOR:STATE? query.
  • Using the .verify(value) method will send the DISplay:SPECView1:CURSor:CURSOR:STATE? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:SPECView1:CURSor:CURSOR:STATE value command.
SCPI Syntax 
- DISplay:SPECView1:CURSor:CURSOR:STATE {ON|OFF}
- DISplay:SPECView1:CURSor:CURSOR:STATE?
Info
  • 1 specifies the Spectrum View number. is always 1.
  • ON enables viewing cursors in the Spectrum View.
  • OFF disables viewing cursors in the Spectrum View.

DisplaySpecview1CursorCursorVbars

Bases: SCPICmdRead

The DISplay:SPECView1:CURSor:CURSOR:VBArs command tree.

Usage
  • Using the .query() method will send the DISplay:SPECView1:CURSor:CURSOR:VBArs? query.
  • Using the .verify(value) method will send the DISplay:SPECView1:CURSor:CURSOR:VBArs? query and raise an AssertionError if the returned value does not match value.
Properties
  • .aposition: The DISplay:SPECView1:CURSor:CURSOR:VBArs:APOSition command.
  • .bposition: The DISplay:SPECView1:CURSor:CURSOR:VBArs:BPOSition command.
  • .units: The DISplay:SPECView1:CURSor:CURSOR:VBArs:UNIts command.

aposition property 

aposition: DisplaySpecview1CursorCursorVbarsAposition

Return the DISplay:SPECView1:CURSor:CURSOR:VBArs:APOSition command.

Description
  • This command sets or queries the Cursor A vertical bar’s horizontal position in the Spectrum View.
Usage
  • Using the .query() method will send the DISplay:SPECView1:CURSor:CURSOR:VBArs:APOSition? query.
  • Using the .verify(value) method will send the DISplay:SPECView1:CURSor:CURSOR:VBArs:APOSition? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:SPECView1:CURSor:CURSOR:VBArs:APOSition value command.
SCPI Syntax 
- DISplay:SPECView1:CURSor:CURSOR:VBArs:APOSition <NR3>
- DISplay:SPECView1:CURSor:CURSOR:VBArs:APOSition?
Info
  • 1 specifies the Spectrum View number. is always 1.
  • <NR3> specifies the horizontal position of Cursor A in Hz. The available frequency range is set by the frequencies at the left and right edges of the Spectrum View for the cursor source.

bposition property 

bposition: DisplaySpecview1CursorCursorVbarsBposition

Return the DISplay:SPECView1:CURSor:CURSOR:VBArs:BPOSition command.

Description
  • This command sets or queries the Cursor B vertical bar’s horizontal position in the Spectrum View.
Usage
  • Using the .query() method will send the DISplay:SPECView1:CURSor:CURSOR:VBArs:BPOSition? query.
  • Using the .verify(value) method will send the DISplay:SPECView1:CURSor:CURSOR:VBArs:BPOSition? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:SPECView1:CURSor:CURSOR:VBArs:BPOSition value command.
SCPI Syntax 
- DISplay:SPECView1:CURSor:CURSOR:VBArs:BPOSition <NR3>
- DISplay:SPECView1:CURSor:CURSOR:VBArs:BPOSition?
Info
  • 1 specifies the Spectrum View number. is always 1.
  • <NR3> specifies the horizontal position of Cursor B in Hz. The available frequency range is set by the frequencies at the left and right edges of the Spectrum View for the cursor source.

units property 

units: DisplaySpecview1CursorCursorVbarsUnits

Return the DISplay:SPECView1:CURSor:CURSOR:VBArs:UNIts command.

Description
  • This command queries the cursor horizontal units in the Spectrum View.
Usage
  • Using the .query() method will send the DISplay:SPECView1:CURSor:CURSOR:VBArs:UNIts? query.
  • Using the .verify(value) method will send the DISplay:SPECView1:CURSor:CURSOR:VBArs:UNIts? query and raise an AssertionError if the returned value does not match value.
SCPI Syntax 
- DISplay:SPECView1:CURSor:CURSOR:VBArs:UNIts?
Info
  • 1 specifies the Spectrum View number. is always 1.

DisplaySpecview1CursorCursorVbarsAposition

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:SPECView1:CURSor:CURSOR:VBArs:APOSition command.

Description
  • This command sets or queries the Cursor A vertical bar’s horizontal position in the Spectrum View.
Usage
  • Using the .query() method will send the DISplay:SPECView1:CURSor:CURSOR:VBArs:APOSition? query.
  • Using the .verify(value) method will send the DISplay:SPECView1:CURSor:CURSOR:VBArs:APOSition? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:SPECView1:CURSor:CURSOR:VBArs:APOSition value command.
SCPI Syntax 
- DISplay:SPECView1:CURSor:CURSOR:VBArs:APOSition <NR3>
- DISplay:SPECView1:CURSor:CURSOR:VBArs:APOSition?
Info
  • 1 specifies the Spectrum View number. is always 1.
  • <NR3> specifies the horizontal position of Cursor A in Hz. The available frequency range is set by the frequencies at the left and right edges of the Spectrum View for the cursor source.

DisplaySpecview1CursorCursorVbarsBposition

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:SPECView1:CURSor:CURSOR:VBArs:BPOSition command.

Description
  • This command sets or queries the Cursor B vertical bar’s horizontal position in the Spectrum View.
Usage
  • Using the .query() method will send the DISplay:SPECView1:CURSor:CURSOR:VBArs:BPOSition? query.
  • Using the .verify(value) method will send the DISplay:SPECView1:CURSor:CURSOR:VBArs:BPOSition? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:SPECView1:CURSor:CURSOR:VBArs:BPOSition value command.
SCPI Syntax 
- DISplay:SPECView1:CURSor:CURSOR:VBArs:BPOSition <NR3>
- DISplay:SPECView1:CURSor:CURSOR:VBArs:BPOSition?
Info
  • 1 specifies the Spectrum View number. is always 1.
  • <NR3> specifies the horizontal position of Cursor B in Hz. The available frequency range is set by the frequencies at the left and right edges of the Spectrum View for the cursor source.

DisplaySpecview1CursorCursorVbarsUnits

Bases: SCPICmdRead

The DISplay:SPECView1:CURSor:CURSOR:VBArs:UNIts command.

Description
  • This command queries the cursor horizontal units in the Spectrum View.
Usage
  • Using the .query() method will send the DISplay:SPECView1:CURSor:CURSOR:VBArs:UNIts? query.
  • Using the .verify(value) method will send the DISplay:SPECView1:CURSor:CURSOR:VBArs:UNIts? query and raise an AssertionError if the returned value does not match value.
SCPI Syntax 
- DISplay:SPECView1:CURSor:CURSOR:VBArs:UNIts?
Info
  • 1 specifies the Spectrum View number. is always 1.

DisplaySpecview1CursorCursorWaveform

Bases: SCPICmdRead

The DISplay:SPECView1:CURSor:CURSOR:WAVEform command tree.

Usage
  • Using the .query() method will send the DISplay:SPECView1:CURSor:CURSOR:WAVEform? query.
  • Using the .verify(value) method will send the DISplay:SPECView1:CURSor:CURSOR:WAVEform? query and raise an AssertionError if the returned value does not match value.
Properties
  • .aposition: The DISplay:SPECView1:CURSor:CURSOR:WAVEform:APOSition command.
  • .bposition: The DISplay:SPECView1:CURSor:CURSOR:WAVEform:BPOSition command.

aposition property 

aposition: DisplaySpecview1CursorCursorWaveformAposition

Return the DISplay:SPECView1:CURSor:CURSOR:WAVEform:APOSition command.

Description
  • This command sets or queries the Cursor A horizontal position in the Spectrum View.
Usage
  • Using the .query() method will send the DISplay:SPECView1:CURSor:CURSOR:WAVEform:APOSition? query.
  • Using the .verify(value) method will send the DISplay:SPECView1:CURSor:CURSOR:WAVEform:APOSition? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:SPECView1:CURSor:CURSOR:WAVEform:APOSition value command.
SCPI Syntax 
- DISplay:SPECView1:CURSor:CURSOR:WAVEform:APOSition <NR3>
- DISplay:SPECView1:CURSor:CURSOR:WAVEform:APOSition?
Info
  • 1 specifies the Spectrum View number. is always 1.
  • <NR3> specifies the horizontal position of Spectrum View Cursor A in Hz. The range of values is the frequencies at the left and right edges of the Spectrum View for the cursor source.

bposition property 

bposition: DisplaySpecview1CursorCursorWaveformBposition

Return the DISplay:SPECView1:CURSor:CURSOR:WAVEform:BPOSition command.

Description
  • This command sets or queries the Cursor B horizontal position in the Spectrum View.
Usage
  • Using the .query() method will send the DISplay:SPECView1:CURSor:CURSOR:WAVEform:BPOSition? query.
  • Using the .verify(value) method will send the DISplay:SPECView1:CURSor:CURSOR:WAVEform:BPOSition? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:SPECView1:CURSor:CURSOR:WAVEform:BPOSition value command.
SCPI Syntax 
- DISplay:SPECView1:CURSor:CURSOR:WAVEform:BPOSition <NR3>
- DISplay:SPECView1:CURSor:CURSOR:WAVEform:BPOSition?
Info
  • 1 specifies the Spectrum View number. is always 1.
  • <NR3> specifies the horizontal position of Spectrum View Cursor B in Hz. The range of values is the frequencies at the left and right edges of the Spectrum View for the cursor source.

DisplaySpecview1CursorCursorWaveformAposition

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:SPECView1:CURSor:CURSOR:WAVEform:APOSition command.

Description
  • This command sets or queries the Cursor A horizontal position in the Spectrum View.
Usage
  • Using the .query() method will send the DISplay:SPECView1:CURSor:CURSOR:WAVEform:APOSition? query.
  • Using the .verify(value) method will send the DISplay:SPECView1:CURSor:CURSOR:WAVEform:APOSition? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:SPECView1:CURSor:CURSOR:WAVEform:APOSition value command.
SCPI Syntax 
- DISplay:SPECView1:CURSor:CURSOR:WAVEform:APOSition <NR3>
- DISplay:SPECView1:CURSor:CURSOR:WAVEform:APOSition?
Info
  • 1 specifies the Spectrum View number. is always 1.
  • <NR3> specifies the horizontal position of Spectrum View Cursor A in Hz. The range of values is the frequencies at the left and right edges of the Spectrum View for the cursor source.

DisplaySpecview1CursorCursorWaveformBposition

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:SPECView1:CURSor:CURSOR:WAVEform:BPOSition command.

Description
  • This command sets or queries the Cursor B horizontal position in the Spectrum View.
Usage
  • Using the .query() method will send the DISplay:SPECView1:CURSor:CURSOR:WAVEform:BPOSition? query.
  • Using the .verify(value) method will send the DISplay:SPECView1:CURSor:CURSOR:WAVEform:BPOSition? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:SPECView1:CURSor:CURSOR:WAVEform:BPOSition value command.
SCPI Syntax 
- DISplay:SPECView1:CURSor:CURSOR:WAVEform:BPOSition <NR3>
- DISplay:SPECView1:CURSor:CURSOR:WAVEform:BPOSition?
Info
  • 1 specifies the Spectrum View number. is always 1.
  • <NR3> specifies the horizontal position of Spectrum View Cursor B in Hz. The range of values is the frequencies at the left and right edges of the Spectrum View for the cursor source.

DisplaySpecview1Graticule

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:SPECView1:GRAticule command.

Description
  • This command sets or queries the type of graticule shown in the Spectrum View window. The same grid is used for all spectrum traces.
Usage
  • Using the .query() method will send the DISplay:SPECView1:GRAticule? query.
  • Using the .verify(value) method will send the DISplay:SPECView1:GRAticule? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:SPECView1:GRAticule value command.
SCPI Syntax 
- DISplay:SPECView1:GRAticule {GRId|TIMe|FULl|NONe}
- DISplay:SPECView1:GRAticule?
Info
  • 1 specifies the Spectrum View number. is always 1.
  • GRId specifies to show the Grid graticule (frame and grid) in the Spectrum View window.
  • TIMe specifies to show the Time graticule in the Spectrum View window.
  • FULl specifies to show the Full graticule (frame, a grid and cross hairs) in the Spectrum View window.
  • NONe specifies to show no graticule in the Spectrum View window.

DisplaySpecview1Horz

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:SPECView1:HORZ command.

Description
  • This command sets or queries the horizontal display scaling of the Spectrum View window.
Usage
  • Using the .query() method will send the DISplay:SPECView1:HORZ? query.
  • Using the .verify(value) method will send the DISplay:SPECView1:HORZ? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:SPECView1:HORZ value command.
SCPI Syntax 
- DISplay:SPECView1:HORZ {LOG|LINEAr}
- DISplay:SPECView1:HORZ?
Info
  • 1 specifies the Spectrum View number. is always 1.
  • LINEAr sets the Spectrum View horizontal scaling to linear.
  • LOG sets the Spectrum View horizontal scaling to log.

DisplaySpecview1Intensity

Bases: SCPICmdRead

The DISplay:SPECView1:INTENSITy command tree.

Usage
  • Using the .query() method will send the DISplay:SPECView1:INTENSITy? query.
  • Using the .verify(value) method will send the DISplay:SPECView1:INTENSITy? query and raise an AssertionError if the returned value does not match value.
Properties
  • .graticule: The DISplay:SPECView1:INTENSITy:GRATicule command.
  • .waveform: The DISplay:SPECView1:INTENSITy:WAVEform command.

graticule property 

graticule: DisplaySpecview1IntensityGraticule

Return the DISplay:SPECView1:INTENSITy:GRATicule command.

Description
  • This command sets or queries the graticule saturation (brightness) level in the Spectrum View window.
Usage
  • Using the .query() method will send the DISplay:SPECView1:INTENSITy:GRATicule? query.
  • Using the .verify(value) method will send the DISplay:SPECView1:INTENSITy:GRATicule? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:SPECView1:INTENSITy:GRATicule value command.
SCPI Syntax 
- DISplay:SPECView1:INTENSITy:GRATicule <NR2>
- DISplay:SPECView1:INTENSITy:GRATicule?
Info
  • 1 specifies the Spectrum View number. is always 1.
  • <NR2> specifies the Spectrum View graticule intensity lever as a percent between 0% and 100%.

waveform property 

waveform: DisplaySpecview1IntensityWaveform

Return the DISplay:SPECView1:INTENSITy:WAVEform command.

Description
  • This command sets or queries the spectrum trace saturation (brightness) level in the Spectrum View window.
Usage
  • Using the .query() method will send the DISplay:SPECView1:INTENSITy:WAVEform? query.
  • Using the .verify(value) method will send the DISplay:SPECView1:INTENSITy:WAVEform? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:SPECView1:INTENSITy:WAVEform value command.
SCPI Syntax 
- DISplay:SPECView1:INTENSITy:WAVEform <NR2>
- DISplay:SPECView1:INTENSITy:WAVEform?
Info
  • 1 specifies the Spectrum View number. is always 1.
  • <NR2> specifies the spectrum trace intensity lever as a percent between 1% and 100%.

DisplaySpecview1IntensityGraticule

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:SPECView1:INTENSITy:GRATicule command.

Description
  • This command sets or queries the graticule saturation (brightness) level in the Spectrum View window.
Usage
  • Using the .query() method will send the DISplay:SPECView1:INTENSITy:GRATicule? query.
  • Using the .verify(value) method will send the DISplay:SPECView1:INTENSITy:GRATicule? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:SPECView1:INTENSITy:GRATicule value command.
SCPI Syntax 
- DISplay:SPECView1:INTENSITy:GRATicule <NR2>
- DISplay:SPECView1:INTENSITy:GRATicule?
Info
  • 1 specifies the Spectrum View number. is always 1.
  • <NR2> specifies the Spectrum View graticule intensity lever as a percent between 0% and 100%.

DisplaySpecview1IntensityWaveform

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:SPECView1:INTENSITy:WAVEform command.

Description
  • This command sets or queries the spectrum trace saturation (brightness) level in the Spectrum View window.
Usage
  • Using the .query() method will send the DISplay:SPECView1:INTENSITy:WAVEform? query.
  • Using the .verify(value) method will send the DISplay:SPECView1:INTENSITy:WAVEform? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:SPECView1:INTENSITy:WAVEform value command.
SCPI Syntax 
- DISplay:SPECView1:INTENSITy:WAVEform <NR2>
- DISplay:SPECView1:INTENSITy:WAVEform?
Info
  • 1 specifies the Spectrum View number. is always 1.
  • <NR2> specifies the spectrum trace intensity lever as a percent between 1% and 100%.

DisplaySpecview1Viewstyle

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:SPECView1:VIEWStyle command.

Description
  • This command sets or queries the spectrum trace layout style used by the Spectrum View window.
Usage
  • Using the .query() method will send the DISplay:SPECView1:VIEWStyle? query.
  • Using the .verify(value) method will send the DISplay:SPECView1:VIEWStyle? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:SPECView1:VIEWStyle value command.
SCPI Syntax 
- DISplay:SPECView1:VIEWStyle {OVErlay|STAcked}
- DISplay:SPECView1:VIEWStyle?
Info
  • 1 specifies the Spectrum View number. is always 1.
  • OVErlay specifies the Spectrum View window to show all spectrum traces drawn on top of each other.
  • STAcked specifies the Spectrum View window to show each spectrum trace in a separate horizontal slice.

DisplayVarpersist

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:VARpersist command.

Description
  • This command sets or queries display persistence decay time, which is the approximate decay time for a freshly struck persistence sample.
Usage
  • Using the .query() method will send the DISplay:VARpersist? query.
  • Using the .verify(value) method will send the DISplay:VARpersist? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:VARpersist value command.
SCPI Syntax 
- DISplay:VARpersist <NR3>
- DISplay:VARpersist?
Info
  • <NR3> indicates the persistence decay time and ranges from 0.5 to 100.

DisplayWaveform

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:WAVEform command.

Description
  • This command globally enables or disables the waveform display. When disabled, the waveform is still acquired and held in memory, but it is not drawn to the screen. Disabling the waveform display may improve processing speed.
Usage
  • Using the .query() method will send the DISplay:WAVEform? query.
  • Using the .verify(value) method will send the DISplay:WAVEform? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:WAVEform value command.
SCPI Syntax 
- DISplay:WAVEform {ON|OFF|<NR1>}
- DISplay:WAVEform?
Info
  • <NR1> enables or disables the waveform display. 0 disables the waveform display; any other value enables the waveform display.
  • ON enables the waveform display.
  • OFF disables the waveform display.

DisplayWaveview

Bases: SCPICmdRead

The DISplay:WAVEView command tree.

Usage
  • Using the .query() method will send the DISplay:WAVEView? query.
  • Using the .verify(value) method will send the DISplay:WAVEView? query and raise an AssertionError if the returned value does not match value.
Properties
  • .cursor: The DISplay:WAVEView:CURSor command tree.
  • .gridtype: The DISplay:WAVEView:GRIDTYPE command.

cursor property 

cursor: DisplayWaveviewCursor

Return the DISplay:WAVEView:CURSor command tree.

Usage
  • Using the .query() method will send the DISplay:WAVEView:CURSor? query.
  • Using the .verify(value) method will send the DISplay:WAVEView:CURSor? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .cursor1: The DISplay:WAVEView:CURSor:CURSOR1 command tree.

gridtype property 

gridtype: DisplayWaveviewGridtype

Return the DISplay:WAVEView:GRIDTYPE command.

Description
  • This command sets or queries the Waveform View Graticule type.
Usage
  • Using the .query() method will send the DISplay:WAVEView:GRIDTYPE? query.
  • Using the .verify(value) method will send the DISplay:WAVEView:GRIDTYPE? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:WAVEView:GRIDTYPE value command.
SCPI Syntax 
- DISplay:WAVEView:GRIDTYPE {MOVEABLE|FIXED}
- DISplay:WAVEView:GRIDTYPE?
Info
  • MOVEABLE sets the Waveform View so that both the waveform and the grid (graticule) move together when moving the waveform horizontally.
  • FIXED sets the Waveform View so that the grid dows not move when moving the waveform horizontally.

DisplayWaveview1

Bases: SCPICmdRead

The DISplay:WAVEView1 command tree.

Usage
  • Using the .query() method will send the DISplay:WAVEView1? query.
  • Using the .verify(value) method will send the DISplay:WAVEView1? query and raise an AssertionError if the returned value does not match value.
Properties
  • .bus: The DISplay:WAVEView1:BUS command tree.
  • .ch: The DISplay:WAVEView1:CH<x> command tree.
  • .cursor: The DISplay:WAVEView1:CURSor command.
  • .filter: The DISplay:WAVEView1:FILTer command.
  • .graticule: The DISplay:WAVEView1:GRAticule command.
  • .intensity: The DISplay:WAVEView1:INTENSITy command tree.
  • .math: The DISplay:WAVEView1:MATH command tree.
  • .plot: The DISplay:WAVEView1:PLOT command tree.
  • .ref: The DISplay:WAVEView1:REF command tree.
  • .rf_frequency: The DISplay:WAVEView1:RF_FREQuency<x> command tree.
  • .rf_magnitude: The DISplay:WAVEView1:RF_MAGnitude<x> command tree.
  • .rf_phase: The DISplay:WAVEView1:RF_PHASe<x> command tree.
  • .style: The DISplay:WAVEView1:STYle command.
  • .viewstyle: The DISplay:WAVEView1:VIEWStyle command.
  • .zoom: The DISplay:WAVEView1:ZOOM command.
  • .refx: The DISplay:WAVEView1:REF<x> command tree.

bus property 

bus: DisplayWaveview1Bus

Return the DISplay:WAVEView1:BUS command tree.

Usage
  • Using the .query() method will send the DISplay:WAVEView1:BUS? query.
  • Using the .verify(value) method will send the DISplay:WAVEView1:BUS? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .b: The DISplay:WAVEView1:BUS:B<x> command tree.

ch property 

ch: dict[int, DisplayWaveview1Channel]

Return the DISplay:WAVEView1:CH<x> command tree.

Usage
  • Using the .query() method will send the DISplay:WAVEView1:CH<x>? query.
  • Using the .verify(value) method will send the DISplay:WAVEView1:CH<x>? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .state: The DISplay:WAVEView1:CH<x>:STATE command.
  • .vertical: The DISplay:WAVEView1:CH<x>:VERTical command tree.
  • .d: The DISplay:WAVEView1:CH<x>_D<x> command tree.
  • .dall: The DISplay:WAVEView1:CH<x>_DALL command tree.

cursor property 

cursor: DisplayWaveview1Cursor

Return the DISplay:WAVEView1:CURSor command.

Description
  • This query returns the cursor parameters for the specified Waveform View.
Usage
  • Using the .query() method will send the DISplay:WAVEView1:CURSor? query.
  • Using the .verify(value) method will send the DISplay:WAVEView1:CURSor? query and raise an AssertionError if the returned value does not match value.
SCPI Syntax 
- DISplay:WAVEView1:CURSor?
Sub-properties
  • .cursor: The DISplay:WAVEView1:CURSor:CURSOR command tree.
  • .cursor1: The DISplay:WAVEView1:CURSor:CURSOR1 command.

filter property 

filter: DisplayWaveview1Filter

Return the DISplay:WAVEView1:FILTer command.

Description
  • This command sets or queries the type of interpolation filter for the display.
Usage
  • Using the .query() method will send the DISplay:WAVEView1:FILTer? query.
  • Using the .verify(value) method will send the DISplay:WAVEView1:FILTer? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:WAVEView1:FILTer value command.
SCPI Syntax 
- DISplay:WAVEView1:FILTer {SINX|LINear}
- DISplay:WAVEView1:FILTer?
Info
  • LINEAr specifies linear interpolation, where acquired points are connected with straight lines.
  • SINX specifies sin(x)/x interpolation, where acquired points are fit to a curve.

graticule property 

graticule: DisplayWaveview1Graticule

Return the DISplay:WAVEView1:GRAticule command.

Description
  • This command selects or queries the type of graticule that is displayed.
Usage
  • Using the .query() method will send the DISplay:WAVEView1:GRAticule? query.
  • Using the .verify(value) method will send the DISplay:WAVEView1:GRAticule? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:WAVEView1:GRAticule value command.
SCPI Syntax 
- DISplay:WAVEView1:GRAticule {GRId|TIMe|FULl|NONe}
- DISplay:WAVEView1:GRAticule?
Info
  • GRId specifies a frame and grid only.
  • TIMe specifies a time graticule only.
  • FULl specifies a frame, a grid and cross hairs.
  • NONe specified no graticule.

intensity property 

intensity: DisplayWaveview1Intensity

Return the DISplay:WAVEView1:INTENSITy command tree.

Usage
  • Using the .query() method will send the DISplay:WAVEView1:INTENSITy? query.
  • Using the .verify(value) method will send the DISplay:WAVEView1:INTENSITy? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .graticule: The DISplay:WAVEView1:INTENSITy:GRATicule command.
  • .waveform: The DISplay:WAVEView1:INTENSITy:WAVEform command.

math property 

math: DisplayWaveview1Math

Return the DISplay:WAVEView1:MATH command tree.

Usage
  • Using the .query() method will send the DISplay:WAVEView1:MATH? query.
  • Using the .verify(value) method will send the DISplay:WAVEView1:MATH? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .math: The DISplay:WAVEView1:MATH:MATH<x> command tree.

plot property 

plot: DisplayWaveview1Plot

Return the DISplay:WAVEView1:PLOT command tree.

Usage
  • Using the .query() method will send the DISplay:WAVEView1:PLOT? query.
  • Using the .verify(value) method will send the DISplay:WAVEView1:PLOT? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .plot: The DISplay:WAVEView1:PLOT:PLOT<x> command tree.

ref property 

ref: DisplayWaveview1Ref

Return the DISplay:WAVEView1:REF command tree.

Usage
  • Using the .query() method will send the DISplay:WAVEView1:REF? query.
  • Using the .verify(value) method will send the DISplay:WAVEView1:REF? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .ref: The DISplay:WAVEView1:REF:REF<x> command tree.

refx property 

refx: dict[int, DisplayWaveview1RefItem]

Return the DISplay:WAVEView1:REF<x> command tree.

Usage
  • Using the .query() method will send the DISplay:WAVEView1:REF<x>? query.
  • Using the .verify(value) method will send the DISplay:WAVEView1:REF<x>? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .dall: The DISplay:WAVEView1:REF<x>_DALL command tree.

rf_frequency property 

rf_frequency: dict[int, DisplayWaveview1RfFrequencyItem]

Return the DISplay:WAVEView1:RF_FREQuency<x> command tree.

Usage
  • Using the .query() method will send the DISplay:WAVEView1:RF_FREQuency<x>? query.
  • Using the .verify(value) method will send the DISplay:WAVEView1:RF_FREQuency<x>? query and raise an AssertionError if the returned value does not match value.
Info
  • RF_FREQuency<x> specifies the number of the Frequency vs. Time waveform.
Sub-properties
  • .vertical: The DISplay:WAVEView1:RF_FREQuency<x>:VERTical command tree.

rf_magnitude property 

rf_magnitude: dict[int, DisplayWaveview1RfMagnitudeItem]

Return the DISplay:WAVEView1:RF_MAGnitude<x> command tree.

Usage
  • Using the .query() method will send the DISplay:WAVEView1:RF_MAGnitude<x>? query.
  • Using the .verify(value) method will send the DISplay:WAVEView1:RF_MAGnitude<x>? query and raise an AssertionError if the returned value does not match value.
Info
  • RF_MAGnitude<x> specifies the number of the Magnitude vs. Time Frequency waveform.
Sub-properties
  • .vertical: The DISplay:WAVEView1:RF_MAGnitude<x>:VERTical command tree.

rf_phase property 

rf_phase: dict[int, DisplayWaveview1RfPhaseItem]

Return the DISplay:WAVEView1:RF_PHASe<x> command tree.

Usage
  • Using the .query() method will send the DISplay:WAVEView1:RF_PHASe<x>? query.
  • Using the .verify(value) method will send the DISplay:WAVEView1:RF_PHASe<x>? query and raise an AssertionError if the returned value does not match value.
Info
  • RF_PHASe<x> specifies the number of the Phase vs. Time Frequency waveform.
Sub-properties
  • .vertical: The DISplay:WAVEView1:RF_PHASe<x>:VERTical command tree.

style property 

style: DisplayWaveview1Style

Return the DISplay:WAVEView1:STYle command.

Description
  • This command sets or queries how the waveforms are displayed for analysis mode.
Usage
  • Using the .query() method will send the DISplay:WAVEView1:STYle? query.
  • Using the .verify(value) method will send the DISplay:WAVEView1:STYle? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:WAVEView1:STYle value command.
SCPI Syntax 
- DISplay:WAVEView1:STYle {VECtors|DOTsonly}
- DISplay:WAVEView1:STYle?
Info
  • DOTs displays individual data points. New points immediately replace old ones.
  • VECtors connects adjacent data points. New points immediately replace old ones.

viewstyle property 

viewstyle: DisplayWaveview1Viewstyle

Return the DISplay:WAVEView1:VIEWStyle command.

Description
  • The command sets or queries the waveform layout style used by the display.
Usage
  • Using the .query() method will send the DISplay:WAVEView1:VIEWStyle? query.
  • Using the .verify(value) method will send the DISplay:WAVEView1:VIEWStyle? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:WAVEView1:VIEWStyle value command.
SCPI Syntax 
- DISplay:WAVEView1:VIEWStyle {OVErlay|STAcked}
- DISplay:WAVEView1:VIEWStyle?
Info
  • OVErlay specifies that the display view style used by the specified Waveform View is overlay.
  • STAcked specifies that the display view style used by the specified Waveform View is stacked.

zoom property 

zoom: DisplayWaveview1Zoom

Return the DISplay:WAVEView1:ZOOM command.

Description
  • This query returns the zoom parameters of the specified Waveform View.
Usage
  • Using the .query() method will send the DISplay:WAVEView1:ZOOM? query.
  • Using the .verify(value) method will send the DISplay:WAVEView1:ZOOM? query and raise an AssertionError if the returned value does not match value.
SCPI Syntax 
- DISplay:WAVEView1:ZOOM?
Sub-properties
  • .zoom1: The DISplay:WAVEView1:ZOOM:ZOOM1 command.

DisplayWaveview1Bus

Bases: SCPICmdRead

The DISplay:WAVEView1:BUS command tree.

Usage
  • Using the .query() method will send the DISplay:WAVEView1:BUS? query.
  • Using the .verify(value) method will send the DISplay:WAVEView1:BUS? query and raise an AssertionError if the returned value does not match value.
Properties
  • .b: The DISplay:WAVEView1:BUS:B<x> command tree.

b property 

b: dict[int, DisplayWaveview1BusBItem]

Return the DISplay:WAVEView1:BUS:B<x> command tree.

Usage
  • Using the .query() method will send the DISplay:WAVEView1:BUS:B<x>? query.
  • Using the .verify(value) method will send the DISplay:WAVEView1:BUS:B<x>? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .state: The DISplay:WAVEView1:BUS:B<x>:STATE command.
  • .vertical: The DISplay:WAVEView1:BUS:B<x>:VERTical command tree.

DisplayWaveview1BusBItem

Bases: ValidatedDynamicNumberCmd, SCPICmdRead

The DISplay:WAVEView1:BUS:B<x> command tree.

Usage
  • Using the .query() method will send the DISplay:WAVEView1:BUS:B<x>? query.
  • Using the .verify(value) method will send the DISplay:WAVEView1:BUS:B<x>? query and raise an AssertionError if the returned value does not match value.
Properties
  • .state: The DISplay:WAVEView1:BUS:B<x>:STATE command.
  • .vertical: The DISplay:WAVEView1:BUS:B<x>:VERTical command tree.

state property 

state: DisplayWaveview1BusBItemState

Return the DISplay:WAVEView1:BUS:B<x>:STATE command.

Description
  • Sets or queries the state of the specified bus in the specified Waveform View.
Usage
  • Using the .query() method will send the DISplay:WAVEView1:BUS:B<x>:STATE? query.
  • Using the .verify(value) method will send the DISplay:WAVEView1:BUS:B<x>:STATE? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:WAVEView1:BUS:B<x>:STATE value command.
SCPI Syntax 
- DISplay:WAVEView1:BUS:B<x>:STATE {ON|OFF|1|0}
- DISplay:WAVEView1:BUS:B<x>:STATE?
Info
  • 0 turns specified bus off.
  • 1 turns the specified bus on.
  • ON turns the specified bus on.
  • OFF turns specified bus off.

vertical property 

vertical: DisplayWaveview1BusBItemVertical

Return the DISplay:WAVEView1:BUS:B<x>:VERTical command tree.

Usage
  • Using the .query() method will send the DISplay:WAVEView1:BUS:B<x>:VERTical? query.
  • Using the .verify(value) method will send the DISplay:WAVEView1:BUS:B<x>:VERTical? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .position: The DISplay:WAVEView1:BUS:B<x>:VERTical:POSition command.

DisplayWaveview1BusBItemState

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:WAVEView1:BUS:B<x>:STATE command.

Description
  • Sets or queries the state of the specified bus in the specified Waveform View.
Usage
  • Using the .query() method will send the DISplay:WAVEView1:BUS:B<x>:STATE? query.
  • Using the .verify(value) method will send the DISplay:WAVEView1:BUS:B<x>:STATE? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:WAVEView1:BUS:B<x>:STATE value command.
SCPI Syntax 
- DISplay:WAVEView1:BUS:B<x>:STATE {ON|OFF|1|0}
- DISplay:WAVEView1:BUS:B<x>:STATE?
Info
  • 0 turns specified bus off.
  • 1 turns the specified bus on.
  • ON turns the specified bus on.
  • OFF turns specified bus off.

DisplayWaveview1BusBItemVertical

Bases: SCPICmdRead

The DISplay:WAVEView1:BUS:B<x>:VERTical command tree.

Usage
  • Using the .query() method will send the DISplay:WAVEView1:BUS:B<x>:VERTical? query.
  • Using the .verify(value) method will send the DISplay:WAVEView1:BUS:B<x>:VERTical? query and raise an AssertionError if the returned value does not match value.
Properties
  • .position: The DISplay:WAVEView1:BUS:B<x>:VERTical:POSition command.

position property 

position: DisplayWaveview1BusBItemVerticalPosition

Return the DISplay:WAVEView1:BUS:B<x>:VERTical:POSition command.

Description
  • Sets or queries the vertical position of the specified bus in the specified Waveform View.
Usage
  • Using the .query() method will send the DISplay:WAVEView1:BUS:B<x>:VERTical:POSition? query.
  • Using the .verify(value) method will send the DISplay:WAVEView1:BUS:B<x>:VERTical:POSition? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:WAVEView1:BUS:B<x>:VERTical:POSition value command.
SCPI Syntax 
- DISplay:WAVEView1:BUS:B<x>:VERTical:POSition <NR3>
- DISplay:WAVEView1:BUS:B<x>:VERTical:POSition?
Info
  • <NR3> is the vertical position of the specified bus.

DisplayWaveview1BusBItemVerticalPosition

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:WAVEView1:BUS:B<x>:VERTical:POSition command.

Description
  • Sets or queries the vertical position of the specified bus in the specified Waveform View.
Usage
  • Using the .query() method will send the DISplay:WAVEView1:BUS:B<x>:VERTical:POSition? query.
  • Using the .verify(value) method will send the DISplay:WAVEView1:BUS:B<x>:VERTical:POSition? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:WAVEView1:BUS:B<x>:VERTical:POSition value command.
SCPI Syntax 
- DISplay:WAVEView1:BUS:B<x>:VERTical:POSition <NR3>
- DISplay:WAVEView1:BUS:B<x>:VERTical:POSition?
Info
  • <NR3> is the vertical position of the specified bus.

DisplayWaveview1Channel

Bases: ValidatedChannel, SCPICmdRead

The DISplay:WAVEView1:CH<x> command tree.

Usage
  • Using the .query() method will send the DISplay:WAVEView1:CH<x>? query.
  • Using the .verify(value) method will send the DISplay:WAVEView1:CH<x>? query and raise an AssertionError if the returned value does not match value.
Properties
  • .state: The DISplay:WAVEView1:CH<x>:STATE command.
  • .vertical: The DISplay:WAVEView1:CH<x>:VERTical command tree.
  • .d: The DISplay:WAVEView1:CH<x>_D<x> command tree.
  • .dall: The DISplay:WAVEView1:CH<x>_DALL command tree.

d property 

d: dict[int, DisplayWaveview1ChannelDigitalBit]

Return the DISplay:WAVEView1:CH<x>_D<x> command tree.

Usage
  • Using the .query() method will send the DISplay:WAVEView1:CH<x>_D<x>? query.
  • Using the .verify(value) method will send the DISplay:WAVEView1:CH<x>_D<x>? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .state: The DISplay:WAVEView1:CH<x>_D<x>:STATE command.

dall property 

dall: DisplayWaveview1ChannelDall

Return the DISplay:WAVEView1:CH<x>_DALL command tree.

Usage
  • Using the .query() method will send the DISplay:WAVEView1:CH<x>_DALL? query.
  • Using the .verify(value) method will send the DISplay:WAVEView1:CH<x>_DALL? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .state: The DISplay:WAVEView1:CH<x>_DALL:STATE command.
  • .vertical: The DISplay:WAVEView1:CH<x>_DALL:VERTical command tree.

state property 

state: DisplayWaveview1ChannelState

Return the DISplay:WAVEView1:CH<x>:STATE command.

Description
  • Sets or queries the state of the specified channel in the specified Waveform View.
Usage
  • Using the .query() method will send the DISplay:WAVEView1:CH<x>:STATE? query.
  • Using the .verify(value) method will send the DISplay:WAVEView1:CH<x>:STATE? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:WAVEView1:CH<x>:STATE value command.
SCPI Syntax 
- DISplay:WAVEView1:CH<x>:STATE {ON|OFF|<NR1>}
- DISplay:WAVEView1:CH<x>:STATE?
Info
  • <NR1> = 0 disables the specified channel on the specified Waveform View; any other value turns this feature on.
  • OFF disables the display the specified channel on the specified Waveform View.
  • ON enables the specified channel on the specified Waveform View.

vertical property 

vertical: DisplayWaveview1ChannelVertical

Return the DISplay:WAVEView1:CH<x>:VERTical command tree.

Usage
  • Using the .query() method will send the DISplay:WAVEView1:CH<x>:VERTical? query.
  • Using the .verify(value) method will send the DISplay:WAVEView1:CH<x>:VERTical? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .position: The DISplay:WAVEView1:CH<x>:VERTical:POSition command.
  • .scale: The DISplay:WAVEView1:CH<x>:VERTical:SCAle command.

DisplayWaveview1ChannelDall

Bases: SCPICmdRead

The DISplay:WAVEView1:CH<x>_DALL command tree.

Usage
  • Using the .query() method will send the DISplay:WAVEView1:CH<x>_DALL? query.
  • Using the .verify(value) method will send the DISplay:WAVEView1:CH<x>_DALL? query and raise an AssertionError if the returned value does not match value.
Properties
  • .state: The DISplay:WAVEView1:CH<x>_DALL:STATE command.
  • .vertical: The DISplay:WAVEView1:CH<x>_DALL:VERTical command tree.

state property 

state: DisplayWaveview1ChannelDallState

Return the DISplay:WAVEView1:CH<x>_DALL:STATE command.

Description
  • This command sets or queries the display state of the specified digital channel in the specified Waveform View.
Usage
  • Using the .query() method will send the DISplay:WAVEView1:CH<x>_DALL:STATE? query.
  • Using the .verify(value) method will send the DISplay:WAVEView1:CH<x>_DALL:STATE? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:WAVEView1:CH<x>_DALL:STATE value command.
SCPI Syntax 
- DISplay:WAVEView1:CH<x>_DALL:STATE {ON|OFF|<NR1>}
- DISplay:WAVEView1:CH<x>_DALL:STATE?
Info
  • <NR1> = 0 disables the display of the specified channels on the specified Waveform View; any other value turns this feature on.
  • OFF disables the display of the specified channels on the specified Waveform View.
  • ON enables the display of the specified channels on the specified Waveform View.

vertical property 

vertical: DisplayWaveview1ChannelDallVertical

Return the DISplay:WAVEView1:CH<x>_DALL:VERTical command tree.

Usage
  • Using the .query() method will send the DISplay:WAVEView1:CH<x>_DALL:VERTical? query.
  • Using the .verify(value) method will send the DISplay:WAVEView1:CH<x>_DALL:VERTical? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .position: The DISplay:WAVEView1:CH<x>_DALL:VERTical:POSition command.

DisplayWaveview1ChannelDallState

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:WAVEView1:CH<x>_DALL:STATE command.

Description
  • This command sets or queries the display state of the specified digital channel in the specified Waveform View.
Usage
  • Using the .query() method will send the DISplay:WAVEView1:CH<x>_DALL:STATE? query.
  • Using the .verify(value) method will send the DISplay:WAVEView1:CH<x>_DALL:STATE? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:WAVEView1:CH<x>_DALL:STATE value command.
SCPI Syntax 
- DISplay:WAVEView1:CH<x>_DALL:STATE {ON|OFF|<NR1>}
- DISplay:WAVEView1:CH<x>_DALL:STATE?
Info
  • <NR1> = 0 disables the display of the specified channels on the specified Waveform View; any other value turns this feature on.
  • OFF disables the display of the specified channels on the specified Waveform View.
  • ON enables the display of the specified channels on the specified Waveform View.

DisplayWaveview1ChannelDallVertical

Bases: SCPICmdRead

The DISplay:WAVEView1:CH<x>_DALL:VERTical command tree.

Usage
  • Using the .query() method will send the DISplay:WAVEView1:CH<x>_DALL:VERTical? query.
  • Using the .verify(value) method will send the DISplay:WAVEView1:CH<x>_DALL:VERTical? query and raise an AssertionError if the returned value does not match value.
Properties
  • .position: The DISplay:WAVEView1:CH<x>_DALL:VERTical:POSition command.

position property 

position: DisplayWaveview1ChannelDallVerticalPosition

Return the DISplay:WAVEView1:CH<x>_DALL:VERTical:POSition command.

Description
  • This command sets or queries the vertical position of the specified digital channel in the specified Waveform View in divisions. The position ranges from 5.0 to -5.0 divisions.
Usage
  • Using the .query() method will send the DISplay:WAVEView1:CH<x>_DALL:VERTical:POSition? query.
  • Using the .verify(value) method will send the DISplay:WAVEView1:CH<x>_DALL:VERTical:POSition? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:WAVEView1:CH<x>_DALL:VERTical:POSition value command.
SCPI Syntax 
- DISplay:WAVEView1:CH<x>_DALL:VERTical:POSition <NR3>
- DISplay:WAVEView1:CH<x>_DALL:VERTical:POSition?
Info
  • <NR3> is the vertical position of the specified digital channel in the specified Waveform View in divisions.

DisplayWaveview1ChannelDallVerticalPosition

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:WAVEView1:CH<x>_DALL:VERTical:POSition command.

Description
  • This command sets or queries the vertical position of the specified digital channel in the specified Waveform View in divisions. The position ranges from 5.0 to -5.0 divisions.
Usage
  • Using the .query() method will send the DISplay:WAVEView1:CH<x>_DALL:VERTical:POSition? query.
  • Using the .verify(value) method will send the DISplay:WAVEView1:CH<x>_DALL:VERTical:POSition? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:WAVEView1:CH<x>_DALL:VERTical:POSition value command.
SCPI Syntax 
- DISplay:WAVEView1:CH<x>_DALL:VERTical:POSition <NR3>
- DISplay:WAVEView1:CH<x>_DALL:VERTical:POSition?
Info
  • <NR3> is the vertical position of the specified digital channel in the specified Waveform View in divisions.

DisplayWaveview1ChannelDigitalBit

Bases: ValidatedDigitalBit, SCPICmdRead

The DISplay:WAVEView1:CH<x>_D<x> command tree.

Usage
  • Using the .query() method will send the DISplay:WAVEView1:CH<x>_D<x>? query.
  • Using the .verify(value) method will send the DISplay:WAVEView1:CH<x>_D<x>? query and raise an AssertionError if the returned value does not match value.
Properties
  • .state: The DISplay:WAVEView1:CH<x>_D<x>:STATE command.

state property 

state: DisplayWaveview1ChannelDigitalBitState

Return the DISplay:WAVEView1:CH<x>_D<x>:STATE command.

Description
  • This command sets or queries the display state of the specified digital channel in the specified Waveform View.
Usage
  • Using the .query() method will send the DISplay:WAVEView1:CH<x>_D<x>:STATE? query.
  • Using the .verify(value) method will send the DISplay:WAVEView1:CH<x>_D<x>:STATE? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:WAVEView1:CH<x>_D<x>:STATE value command.
SCPI Syntax 
- DISplay:WAVEView1:CH<x>_D<x>:STATE {ON|OFF|<NR1>}
- DISplay:WAVEView1:CH<x>_D<x>:STATE?
Info
  • <NR1> = 0 disables the display of the specified channel on the specified Waveform View; any other value turns this feature on.
  • OFF disables the display of the specified channel on the specified Waveform View.
  • ON enables the display of the specified channel on the specified Waveform View.

DisplayWaveview1ChannelDigitalBitState

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:WAVEView1:CH<x>_D<x>:STATE command.

Description
  • This command sets or queries the display state of the specified digital channel in the specified Waveform View.
Usage
  • Using the .query() method will send the DISplay:WAVEView1:CH<x>_D<x>:STATE? query.
  • Using the .verify(value) method will send the DISplay:WAVEView1:CH<x>_D<x>:STATE? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:WAVEView1:CH<x>_D<x>:STATE value command.
SCPI Syntax 
- DISplay:WAVEView1:CH<x>_D<x>:STATE {ON|OFF|<NR1>}
- DISplay:WAVEView1:CH<x>_D<x>:STATE?
Info
  • <NR1> = 0 disables the display of the specified channel on the specified Waveform View; any other value turns this feature on.
  • OFF disables the display of the specified channel on the specified Waveform View.
  • ON enables the display of the specified channel on the specified Waveform View.

DisplayWaveview1ChannelState

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:WAVEView1:CH<x>:STATE command.

Description
  • Sets or queries the state of the specified channel in the specified Waveform View.
Usage
  • Using the .query() method will send the DISplay:WAVEView1:CH<x>:STATE? query.
  • Using the .verify(value) method will send the DISplay:WAVEView1:CH<x>:STATE? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:WAVEView1:CH<x>:STATE value command.
SCPI Syntax 
- DISplay:WAVEView1:CH<x>:STATE {ON|OFF|<NR1>}
- DISplay:WAVEView1:CH<x>:STATE?
Info
  • <NR1> = 0 disables the specified channel on the specified Waveform View; any other value turns this feature on.
  • OFF disables the display the specified channel on the specified Waveform View.
  • ON enables the specified channel on the specified Waveform View.

DisplayWaveview1ChannelVertical

Bases: SCPICmdRead

The DISplay:WAVEView1:CH<x>:VERTical command tree.

Usage
  • Using the .query() method will send the DISplay:WAVEView1:CH<x>:VERTical? query.
  • Using the .verify(value) method will send the DISplay:WAVEView1:CH<x>:VERTical? query and raise an AssertionError if the returned value does not match value.
Properties
  • .position: The DISplay:WAVEView1:CH<x>:VERTical:POSition command.
  • .scale: The DISplay:WAVEView1:CH<x>:VERTical:SCAle command.

position property 

position: DisplayWaveview1ChannelVerticalPosition

Return the DISplay:WAVEView1:CH<x>:VERTical:POSition command.

Description
  • Sets or queries the vertical position of the specified channel in the specified Waveform View in divisions. 0.0 divisions is center, 5.0 top of the window, and -5.0 the bottom of the window.
Usage
  • Using the .query() method will send the DISplay:WAVEView1:CH<x>:VERTical:POSition? query.
  • Using the .verify(value) method will send the DISplay:WAVEView1:CH<x>:VERTical:POSition? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:WAVEView1:CH<x>:VERTical:POSition value command.
SCPI Syntax 
- DISplay:WAVEView1:CH<x>:VERTical:POSition <NR3>
- DISplay:WAVEView1:CH<x>:VERTical:POSition?
Info
  • <NR3> is the vertical position in divisions. 0.0 divisions is center, 5.0 top of the window, and -5.0 the bottom of the window.

scale property 

scale: DisplayWaveview1ChannelVerticalScale

Return the DISplay:WAVEView1:CH<x>:VERTical:SCAle command.

Description
  • Sets or queries the vertical scale of the specified channel in volts per division within the specified Waveform View.
Usage
  • Using the .query() method will send the DISplay:WAVEView1:CH<x>:VERTical:SCAle? query.
  • Using the .verify(value) method will send the DISplay:WAVEView1:CH<x>:VERTical:SCAle? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:WAVEView1:CH<x>:VERTical:SCAle value command.
SCPI Syntax 
- DISplay:WAVEView1:CH<x>:VERTical:SCAle <NR3>
- DISplay:WAVEView1:CH<x>:VERTical:SCAle?
Info
  • <NR3> is the vertical scale of the specified channel.

DisplayWaveview1ChannelVerticalPosition

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:WAVEView1:CH<x>:VERTical:POSition command.

Description
  • Sets or queries the vertical position of the specified channel in the specified Waveform View in divisions. 0.0 divisions is center, 5.0 top of the window, and -5.0 the bottom of the window.
Usage
  • Using the .query() method will send the DISplay:WAVEView1:CH<x>:VERTical:POSition? query.
  • Using the .verify(value) method will send the DISplay:WAVEView1:CH<x>:VERTical:POSition? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:WAVEView1:CH<x>:VERTical:POSition value command.
SCPI Syntax 
- DISplay:WAVEView1:CH<x>:VERTical:POSition <NR3>
- DISplay:WAVEView1:CH<x>:VERTical:POSition?
Info
  • <NR3> is the vertical position in divisions. 0.0 divisions is center, 5.0 top of the window, and -5.0 the bottom of the window.

DisplayWaveview1ChannelVerticalScale

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:WAVEView1:CH<x>:VERTical:SCAle command.

Description
  • Sets or queries the vertical scale of the specified channel in volts per division within the specified Waveform View.
Usage
  • Using the .query() method will send the DISplay:WAVEView1:CH<x>:VERTical:SCAle? query.
  • Using the .verify(value) method will send the DISplay:WAVEView1:CH<x>:VERTical:SCAle? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:WAVEView1:CH<x>:VERTical:SCAle value command.
SCPI Syntax 
- DISplay:WAVEView1:CH<x>:VERTical:SCAle <NR3>
- DISplay:WAVEView1:CH<x>:VERTical:SCAle?
Info
  • <NR3> is the vertical scale of the specified channel.

DisplayWaveview1Cursor

Bases: SCPICmdRead

The DISplay:WAVEView1:CURSor command.

Description
  • This query returns the cursor parameters for the specified Waveform View.
Usage
  • Using the .query() method will send the DISplay:WAVEView1:CURSor? query.
  • Using the .verify(value) method will send the DISplay:WAVEView1:CURSor? query and raise an AssertionError if the returned value does not match value.
SCPI Syntax 
- DISplay:WAVEView1:CURSor?
Properties
  • .cursor: The DISplay:WAVEView1:CURSor:CURSOR command tree.
  • .cursor1: The DISplay:WAVEView1:CURSor:CURSOR1 command.

cursor property 

cursor: DisplayWaveview1CursorCursor

Return the DISplay:WAVEView1:CURSor:CURSOR command tree.

Usage
  • Using the .query() method will send the DISplay:WAVEView1:CURSor:CURSOR? query.
  • Using the .verify(value) method will send the DISplay:WAVEView1:CURSor:CURSOR? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .waveform: The DISplay:WAVEView1:CURSor:CURSOR:WAVEform command tree.

cursor1 property 

cursor1: DisplayWaveview1CursorCursor1

Return the DISplay:WAVEView1:CURSor:CURSOR1 command.

Description
  • This query returns the cursor parameters for the specified cursor in the specified Waveform View.
Usage
  • Using the .query() method will send the DISplay:WAVEView1:CURSor:CURSOR1? query.
  • Using the .verify(value) method will send the DISplay:WAVEView1:CURSor:CURSOR1? query and raise an AssertionError if the returned value does not match value.
SCPI Syntax 
- DISplay:WAVEView1:CURSor:CURSOR1?
Sub-properties
  • .asource: The DISplay:WAVEView1:CURSor:CURSOR1:ASOUrce command.
  • .bsource: The DISplay:WAVEView1:CURSor:CURSOR1:BSOUrce command.
  • .ddt: The DISplay:WAVEView1:CURSor:CURSOR1:DDT command.
  • .function: The DISplay:WAVEView1:CURSor:CURSOR1:FUNCtion command.
  • .hbars: The DISplay:WAVEView1:CURSor:CURSOR1:HBArs command tree.
  • .mode: The DISplay:WAVEView1:CURSor:CURSOR1:MODe command.
  • .oneoverdeltatvalue: The DISplay:WAVEView1:CURSor:CURSOR1:ONEOVERDELTATVALUE command.
  • .screen: The DISplay:WAVEView1:CURSor:CURSOR1:SCREEN command tree.
  • .splitmode: The DISplay:WAVEView1:CURSor:CURSOR1:SPLITMODE command.
  • .state: The DISplay:WAVEView1:CURSor:CURSOR1:STATE command.
  • .vbars: The DISplay:WAVEView1:CURSor:CURSOR1:VBArs command tree.
  • .waveform: The DISplay:WAVEView1:CURSor:CURSOR1:WAVEform command tree.

DisplayWaveview1CursorCursor

Bases: SCPICmdRead

The DISplay:WAVEView1:CURSor:CURSOR command tree.

Usage
  • Using the .query() method will send the DISplay:WAVEView1:CURSor:CURSOR? query.
  • Using the .verify(value) method will send the DISplay:WAVEView1:CURSor:CURSOR? query and raise an AssertionError if the returned value does not match value.
Properties
  • .waveform: The DISplay:WAVEView1:CURSor:CURSOR:WAVEform command tree.

waveform property 

waveform: DisplayWaveview1CursorCursorWaveform

Return the DISplay:WAVEView1:CURSor:CURSOR:WAVEform command tree.

Usage
  • Using the .query() method will send the DISplay:WAVEView1:CURSor:CURSOR:WAVEform? query.
  • Using the .verify(value) method will send the DISplay:WAVEView1:CURSor:CURSOR:WAVEform? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .all: The DISplay:WAVEView1:CURSor:CURSOR:WAVEform:ALL command tree.
  • .avposition: The DISplay:WAVEView1:CURSor:CURSOR:WAVEform:AVPOSition command.
  • .bvposition: The DISplay:WAVEView1:CURSor:CURSOR:WAVEform:BVPOSition command.

DisplayWaveview1CursorCursor1

Bases: SCPICmdRead

The DISplay:WAVEView1:CURSor:CURSOR1 command.

Description
  • This query returns the cursor parameters for the specified cursor in the specified Waveform View.
Usage
  • Using the .query() method will send the DISplay:WAVEView1:CURSor:CURSOR1? query.
  • Using the .verify(value) method will send the DISplay:WAVEView1:CURSor:CURSOR1? query and raise an AssertionError if the returned value does not match value.
SCPI Syntax 
- DISplay:WAVEView1:CURSor:CURSOR1?
Properties
  • .asource: The DISplay:WAVEView1:CURSor:CURSOR1:ASOUrce command.
  • .bsource: The DISplay:WAVEView1:CURSor:CURSOR1:BSOUrce command.
  • .ddt: The DISplay:WAVEView1:CURSor:CURSOR1:DDT command.
  • .function: The DISplay:WAVEView1:CURSor:CURSOR1:FUNCtion command.
  • .hbars: The DISplay:WAVEView1:CURSor:CURSOR1:HBArs command tree.
  • .mode: The DISplay:WAVEView1:CURSor:CURSOR1:MODe command.
  • .oneoverdeltatvalue: The DISplay:WAVEView1:CURSor:CURSOR1:ONEOVERDELTATVALUE command.
  • .screen: The DISplay:WAVEView1:CURSor:CURSOR1:SCREEN command tree.
  • .splitmode: The DISplay:WAVEView1:CURSor:CURSOR1:SPLITMODE command.
  • .state: The DISplay:WAVEView1:CURSor:CURSOR1:STATE command.
  • .vbars: The DISplay:WAVEView1:CURSor:CURSOR1:VBArs command tree.
  • .waveform: The DISplay:WAVEView1:CURSor:CURSOR1:WAVEform command tree.

asource property 

asource: DisplayWaveview1CursorCursor1Asource

Return the DISplay:WAVEView1:CURSor:CURSOR1:ASOUrce command.

Description
  • This command sets or queries the cursor A source of the specified cursor in the specified Waveform View.
Usage
  • Using the .query() method will send the DISplay:WAVEView1:CURSor:CURSOR1:ASOUrce? query.
  • Using the .verify(value) method will send the DISplay:WAVEView1:CURSor:CURSOR1:ASOUrce? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:WAVEView1:CURSor:CURSOR1:ASOUrce value command.
SCPI Syntax 
- DISplay:WAVEView1:CURSor:CURSOR1:ASOUrce {AUTO|CH<x>|BUS<x>|MATH<x>|REF<x>|PLOT<x>}
- DISplay:WAVEView1:CURSor:CURSOR1:ASOUrce?
Info
  • AUTO automatically specifies the source.
  • CH<x> specifies an analog channel as the source.
  • Math<x> specifies a math waveform as the source.
  • BUS<x> specifies a bus as source.
  • REF<x> specifies a reference waveform as the source.
  • PLOT<x> specifies a plot as the source.

bsource property 

bsource: DisplayWaveview1CursorCursor1Bsource

Return the DISplay:WAVEView1:CURSor:CURSOR1:BSOUrce command.

Description
  • This command sets or queries the cursor B source of the specified cursor in the specified Waveform View.
Usage
  • Using the .query() method will send the DISplay:WAVEView1:CURSor:CURSOR1:BSOUrce? query.
  • Using the .verify(value) method will send the DISplay:WAVEView1:CURSor:CURSOR1:BSOUrce? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:WAVEView1:CURSor:CURSOR1:BSOUrce value command.
SCPI Syntax 
- DISplay:WAVEView1:CURSor:CURSOR1:BSOUrce {CH<x>|BUS<x>|MATH<x>|REF<x>|PLOT<x>}
- DISplay:WAVEView1:CURSor:CURSOR1:BSOUrce?
Info
  • S<x>_Ch<x> specifies the remote scope number and the analog channel as the source.
  • CH<x> specifies an analog channel as the source.
  • Math<x> specifies a math waveform as the source.
  • BUS<x> specifies a bus as source.
  • REF<x> specifies a reference waveform as the source.
  • PLOT<x> specifies a plot as the source.

ddt property 

ddt: DisplayWaveview1CursorCursor1Ddt

Return the DISplay:WAVEView1:CURSor:CURSOR1:DDT command.

Description
  • This query returns the delta V over delta T cursor readout value of the specified cursor in the specified Waveform View.
Usage
  • Using the .query() method will send the DISplay:WAVEView1:CURSor:CURSOR1:DDT? query.
  • Using the .verify(value) method will send the DISplay:WAVEView1:CURSor:CURSOR1:DDT? query and raise an AssertionError if the returned value does not match value.
SCPI Syntax 
- DISplay:WAVEView1:CURSor:CURSOR1:DDT?

function property 

function: DisplayWaveview1CursorCursor1Function

Return the DISplay:WAVEView1:CURSor:CURSOR1:FUNCtion command.

Description
  • This command sets or queries the cursor type of the specified cursor in the specified Waveform View.
Usage
  • Using the .query() method will send the DISplay:WAVEView1:CURSor:CURSOR1:FUNCtion? query.
  • Using the .verify(value) method will send the DISplay:WAVEView1:CURSor:CURSOR1:FUNCtion? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:WAVEView1:CURSor:CURSOR1:FUNCtion value command.
SCPI Syntax 
- DISplay:WAVEView1:CURSor:CURSOR1:FUNCtion {SCREEN|WAVEFORM|VBArs|HBArs}
- DISplay:WAVEView1:CURSor:CURSOR1:FUNCtion?
Info
  • HBArs specifies horizontal bar cursors, which measure in vertical units.
  • VBArs specifies vertical bar cursors, which measure in horizontal units.
  • SCREEN specifies both horizontal and vertical bar cursors, which measure in horizontal and vertical units specified by the Cursor 1 and Cursor 2 Sources. Use these cursors to measure anywhere in the waveform display area.
  • WAVEFORM specifies paired or split cursors in YT display format for measuring waveform amplitude and time. In XY and XYZ format, these cursors indicate the amplitude positions of an XY pair (Ch1 vs Ch2 voltage, where Ch1 is the X axis and Ch2 is the Y axis) relative to the trigger.

hbars property 

hbars: DisplayWaveview1CursorCursor1Hbars

Return the DISplay:WAVEView1:CURSor:CURSOR1:HBArs command tree.

Usage
  • Using the .query() method will send the DISplay:WAVEView1:CURSor:CURSOR1:HBArs? query.
  • Using the .verify(value) method will send the DISplay:WAVEView1:CURSor:CURSOR1:HBArs? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .aposition: The DISplay:WAVEView1:CURSor:CURSOR1:HBArs:APOSition command.
  • .aunits: The DISplay:WAVEView1:CURSor:CURSOR1:HBArs:AUNIts command.
  • .bposition: The DISplay:WAVEView1:CURSor:CURSOR1:HBArs:BPOSition command.
  • .bunits: The DISplay:WAVEView1:CURSor:CURSOR1:HBArs:BUNIts command.
  • .delta: The DISplay:WAVEView1:CURSor:CURSOR1:HBArs:DELTa command.

mode property 

mode: DisplayWaveview1CursorCursor1Mode

Return the DISplay:WAVEView1:CURSor:CURSOR1:MODe command.

Description
  • Sets or queries the cursor tracking mode of the specified cursor in the specified Waveform View.
Usage
  • Using the .write(value) method will send the DISplay:WAVEView1:CURSor:CURSOR1:MODe value command.
SCPI Syntax 
- DISplay:WAVEView1:CURSor:CURSOR1:MODe {INDEPENDENT|TRACK}
Info
  • TRACK ties the navigational functionality of the two cursors together. For cursor 1 adjustments, this ties the movement of the two cursors together; however, cursor 2 continues to move independently of cursor 1.
  • INDEPENDENT allows independent adjustment of the two cursors.

oneoverdeltatvalue property 

oneoverdeltatvalue: DisplayWaveview1CursorCursor1Oneoverdeltatvalue

Return the DISplay:WAVEView1:CURSor:CURSOR1:ONEOVERDELTATVALUE command.

Description
  • This query returns the one over delta T cursor readout value of the specified cursor in the specified Waveform View.
Usage
  • Using the .query() method will send the DISplay:WAVEView1:CURSor:CURSOR1:ONEOVERDELTATVALUE? query.
  • Using the .verify(value) method will send the DISplay:WAVEView1:CURSor:CURSOR1:ONEOVERDELTATVALUE? query and raise an AssertionError if the returned value does not match value.
SCPI Syntax 
- DISplay:WAVEView1:CURSor:CURSOR1:ONEOVERDELTATVALUE?

screen property 

screen: DisplayWaveview1CursorCursor1Screen

Return the DISplay:WAVEView1:CURSor:CURSOR1:SCREEN command tree.

Usage
  • Using the .query() method will send the DISplay:WAVEView1:CURSor:CURSOR1:SCREEN? query.
  • Using the .verify(value) method will send the DISplay:WAVEView1:CURSor:CURSOR1:SCREEN? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .axposition: The DISplay:WAVEView1:CURSor:CURSOR1:SCREEN:AXPOSition command.
  • .ayposition: The DISplay:WAVEView1:CURSor:CURSOR1:SCREEN:AYPOSition command.
  • .bxposition: The DISplay:WAVEView1:CURSor:CURSOR1:SCREEN:BXPOSition command.
  • .byposition: The DISplay:WAVEView1:CURSor:CURSOR1:SCREEN:BYPOSition command.

splitmode property 

splitmode: DisplayWaveview1CursorCursor1Splitmode

Return the DISplay:WAVEView1:CURSor:CURSOR1:SPLITMODE command.

Description
  • This command sets or queries whether both cursors have the same or different sources.
Usage
  • Using the .query() method will send the DISplay:WAVEView1:CURSor:CURSOR1:SPLITMODE? query.
  • Using the .verify(value) method will send the DISplay:WAVEView1:CURSor:CURSOR1:SPLITMODE? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:WAVEView1:CURSor:CURSOR1:SPLITMODE value command.
SCPI Syntax 
- DISplay:WAVEView1:CURSor:CURSOR1:SPLITMODE {SAME|SPLIT}
- DISplay:WAVEView1:CURSor:CURSOR1:SPLITMODE?
Info
  • SAME specifies both cursors have the same source.
  • SPLIT specifies the cursors have different sources.

state property 

state: DisplayWaveview1CursorCursor1State

Return the DISplay:WAVEView1:CURSor:CURSOR1:STATE command.

Description
  • This command sets or queries the visible state of the specified cursor in the specified Waveform View.
Usage
  • Using the .query() method will send the DISplay:WAVEView1:CURSor:CURSOR1:STATE? query.
  • Using the .verify(value) method will send the DISplay:WAVEView1:CURSor:CURSOR1:STATE? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:WAVEView1:CURSor:CURSOR1:STATE value command.
SCPI Syntax 
- DISplay:WAVEView1:CURSor:CURSOR1:STATE {ON|OFF|<NR1>}
- DISplay:WAVEView1:CURSor:CURSOR1:STATE?
Info
  • <NR1> = 0 disables the specified cursor in the specified Waveform View; any other value turns this feature on.
  • OFF disables the specified cursor in the specified Waveform View.
  • ON enables the specified cursor in the specified Waveform View.

vbars property 

vbars: DisplayWaveview1CursorCursor1Vbars

Return the DISplay:WAVEView1:CURSor:CURSOR1:VBArs command tree.

Usage
  • Using the .query() method will send the DISplay:WAVEView1:CURSor:CURSOR1:VBArs? query.
  • Using the .verify(value) method will send the DISplay:WAVEView1:CURSor:CURSOR1:VBArs? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .aposition: The DISplay:WAVEView1:CURSor:CURSOR1:VBArs:APOSition command.
  • .bposition: The DISplay:WAVEView1:CURSor:CURSOR1:VBArs:BPOSition command.
  • .delta: The DISplay:WAVEView1:CURSor:CURSOR1:VBArs:DELTa command.
  • .units: The DISplay:WAVEView1:CURSor:CURSOR1:VBArs:UNIts command.

waveform property 

waveform: DisplayWaveview1CursorCursor1Waveform

Return the DISplay:WAVEView1:CURSor:CURSOR1:WAVEform command tree.

Usage
  • Using the .query() method will send the DISplay:WAVEView1:CURSor:CURSOR1:WAVEform? query.
  • Using the .verify(value) method will send the DISplay:WAVEView1:CURSor:CURSOR1:WAVEform? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .aposition: The DISplay:WAVEView1:CURSor:CURSOR1:WAVEform:APOSition command.
  • .bposition: The DISplay:WAVEView1:CURSor:CURSOR1:WAVEform:BPOSition command.

DisplayWaveview1CursorCursor1Asource

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:WAVEView1:CURSor:CURSOR1:ASOUrce command.

Description
  • This command sets or queries the cursor A source of the specified cursor in the specified Waveform View.
Usage
  • Using the .query() method will send the DISplay:WAVEView1:CURSor:CURSOR1:ASOUrce? query.
  • Using the .verify(value) method will send the DISplay:WAVEView1:CURSor:CURSOR1:ASOUrce? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:WAVEView1:CURSor:CURSOR1:ASOUrce value command.
SCPI Syntax 
- DISplay:WAVEView1:CURSor:CURSOR1:ASOUrce {AUTO|CH<x>|BUS<x>|MATH<x>|REF<x>|PLOT<x>}
- DISplay:WAVEView1:CURSor:CURSOR1:ASOUrce?
Info
  • AUTO automatically specifies the source.
  • CH<x> specifies an analog channel as the source.
  • Math<x> specifies a math waveform as the source.
  • BUS<x> specifies a bus as source.
  • REF<x> specifies a reference waveform as the source.
  • PLOT<x> specifies a plot as the source.

DisplayWaveview1CursorCursor1Bsource

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:WAVEView1:CURSor:CURSOR1:BSOUrce command.

Description
  • This command sets or queries the cursor B source of the specified cursor in the specified Waveform View.
Usage
  • Using the .query() method will send the DISplay:WAVEView1:CURSor:CURSOR1:BSOUrce? query.
  • Using the .verify(value) method will send the DISplay:WAVEView1:CURSor:CURSOR1:BSOUrce? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:WAVEView1:CURSor:CURSOR1:BSOUrce value command.
SCPI Syntax 
- DISplay:WAVEView1:CURSor:CURSOR1:BSOUrce {CH<x>|BUS<x>|MATH<x>|REF<x>|PLOT<x>}
- DISplay:WAVEView1:CURSor:CURSOR1:BSOUrce?
Info
  • S<x>_Ch<x> specifies the remote scope number and the analog channel as the source.
  • CH<x> specifies an analog channel as the source.
  • Math<x> specifies a math waveform as the source.
  • BUS<x> specifies a bus as source.
  • REF<x> specifies a reference waveform as the source.
  • PLOT<x> specifies a plot as the source.

DisplayWaveview1CursorCursor1Ddt

Bases: SCPICmdRead

The DISplay:WAVEView1:CURSor:CURSOR1:DDT command.

Description
  • This query returns the delta V over delta T cursor readout value of the specified cursor in the specified Waveform View.
Usage
  • Using the .query() method will send the DISplay:WAVEView1:CURSor:CURSOR1:DDT? query.
  • Using the .verify(value) method will send the DISplay:WAVEView1:CURSor:CURSOR1:DDT? query and raise an AssertionError if the returned value does not match value.
SCPI Syntax 
- DISplay:WAVEView1:CURSor:CURSOR1:DDT?

DisplayWaveview1CursorCursor1Function

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:WAVEView1:CURSor:CURSOR1:FUNCtion command.

Description
  • This command sets or queries the cursor type of the specified cursor in the specified Waveform View.
Usage
  • Using the .query() method will send the DISplay:WAVEView1:CURSor:CURSOR1:FUNCtion? query.
  • Using the .verify(value) method will send the DISplay:WAVEView1:CURSor:CURSOR1:FUNCtion? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:WAVEView1:CURSor:CURSOR1:FUNCtion value command.
SCPI Syntax 
- DISplay:WAVEView1:CURSor:CURSOR1:FUNCtion {SCREEN|WAVEFORM|VBArs|HBArs}
- DISplay:WAVEView1:CURSor:CURSOR1:FUNCtion?
Info
  • HBArs specifies horizontal bar cursors, which measure in vertical units.
  • VBArs specifies vertical bar cursors, which measure in horizontal units.
  • SCREEN specifies both horizontal and vertical bar cursors, which measure in horizontal and vertical units specified by the Cursor 1 and Cursor 2 Sources. Use these cursors to measure anywhere in the waveform display area.
  • WAVEFORM specifies paired or split cursors in YT display format for measuring waveform amplitude and time. In XY and XYZ format, these cursors indicate the amplitude positions of an XY pair (Ch1 vs Ch2 voltage, where Ch1 is the X axis and Ch2 is the Y axis) relative to the trigger.

DisplayWaveview1CursorCursor1Hbars

Bases: SCPICmdRead

The DISplay:WAVEView1:CURSor:CURSOR1:HBArs command tree.

Usage
  • Using the .query() method will send the DISplay:WAVEView1:CURSor:CURSOR1:HBArs? query.
  • Using the .verify(value) method will send the DISplay:WAVEView1:CURSor:CURSOR1:HBArs? query and raise an AssertionError if the returned value does not match value.
Properties
  • .aposition: The DISplay:WAVEView1:CURSor:CURSOR1:HBArs:APOSition command.
  • .aunits: The DISplay:WAVEView1:CURSor:CURSOR1:HBArs:AUNIts command.
  • .bposition: The DISplay:WAVEView1:CURSor:CURSOR1:HBArs:BPOSition command.
  • .bunits: The DISplay:WAVEView1:CURSor:CURSOR1:HBArs:BUNIts command.
  • .delta: The DISplay:WAVEView1:CURSor:CURSOR1:HBArs:DELTa command.

aposition property 

aposition: DisplayWaveview1CursorCursor1HbarsAposition

Return the DISplay:WAVEView1:CURSor:CURSOR1:HBArs:APOSition command.

Description
  • Sets or queries the HBARs vertical A position of the specified cursor in the specified Waveform View.
Usage
  • Using the .query() method will send the DISplay:WAVEView1:CURSor:CURSOR1:HBArs:APOSition? query.
  • Using the .verify(value) method will send the DISplay:WAVEView1:CURSor:CURSOR1:HBArs:APOSition? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:WAVEView1:CURSor:CURSOR1:HBArs:APOSition value command.
SCPI Syntax 
- DISplay:WAVEView1:CURSor:CURSOR1:HBArs:APOSition <NR3>
- DISplay:WAVEView1:CURSor:CURSOR1:HBArs:APOSition?
Info
  • <NR3> is the vertical cursor A position of the specified cursor in the specified Waveform View. 0.0 divisions is center, 5.0 top of the waveview, and -5.0 the bottom of the waveview.

aunits property 

aunits: DisplayWaveview1CursorCursor1HbarsAunits

Return the DISplay:WAVEView1:CURSor:CURSOR1:HBArs:AUNIts command.

Description
  • This command queries the cursor A vertical units of the specified cursor in the specified Waveform View.
Usage
  • Using the .query() method will send the DISplay:WAVEView1:CURSor:CURSOR1:HBArs:AUNIts? query.
  • Using the .verify(value) method will send the DISplay:WAVEView1:CURSor:CURSOR1:HBArs:AUNIts? query and raise an AssertionError if the returned value does not match value.
SCPI Syntax 
- DISplay:WAVEView1:CURSor:CURSOR1:HBArs:AUNIts?
Info
  • <QString> is the cursor A vertical units of the specified cursor in the specified Waveform View.

bposition property 

bposition: DisplayWaveview1CursorCursor1HbarsBposition

Return the DISplay:WAVEView1:CURSor:CURSOR1:HBArs:BPOSition command.

Description
  • Sets or queries the HBARs vertical B position of the specified cursor in the specified Waveform View.
Usage
  • Using the .query() method will send the DISplay:WAVEView1:CURSor:CURSOR1:HBArs:BPOSition? query.
  • Using the .verify(value) method will send the DISplay:WAVEView1:CURSor:CURSOR1:HBArs:BPOSition? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:WAVEView1:CURSor:CURSOR1:HBArs:BPOSition value command.
SCPI Syntax 
- DISplay:WAVEView1:CURSor:CURSOR1:HBArs:BPOSition <NR3>
- DISplay:WAVEView1:CURSor:CURSOR1:HBArs:BPOSition?
Info
  • <NR3> is the vertical cursor B position of the specified cursor in the specified Waveform View.

bunits property 

bunits: DisplayWaveview1CursorCursor1HbarsBunits

Return the DISplay:WAVEView1:CURSor:CURSOR1:HBArs:BUNIts command.

Description
  • This command queries the cursor B vertical units of the specified cursor in the specified Waveform View.
Usage
  • Using the .query() method will send the DISplay:WAVEView1:CURSor:CURSOR1:HBArs:BUNIts? query.
  • Using the .verify(value) method will send the DISplay:WAVEView1:CURSor:CURSOR1:HBArs:BUNIts? query and raise an AssertionError if the returned value does not match value.
SCPI Syntax 
- DISplay:WAVEView1:CURSor:CURSOR1:HBArs:BUNIts?

delta property 

delta: DisplayWaveview1CursorCursor1HbarsDelta

Return the DISplay:WAVEView1:CURSor:CURSOR1:HBArs:DELTa command.

Description
  • This command queries the delta V cursor readout value of the specified cursor in the specified Waveform View.
Usage
  • Using the .query() method will send the DISplay:WAVEView1:CURSor:CURSOR1:HBArs:DELTa? query.
  • Using the .verify(value) method will send the DISplay:WAVEView1:CURSor:CURSOR1:HBArs:DELTa? query and raise an AssertionError if the returned value does not match value.
SCPI Syntax 
- DISplay:WAVEView1:CURSor:CURSOR1:HBArs:DELTa?

DisplayWaveview1CursorCursor1HbarsAposition

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:WAVEView1:CURSor:CURSOR1:HBArs:APOSition command.

Description
  • Sets or queries the HBARs vertical A position of the specified cursor in the specified Waveform View.
Usage
  • Using the .query() method will send the DISplay:WAVEView1:CURSor:CURSOR1:HBArs:APOSition? query.
  • Using the .verify(value) method will send the DISplay:WAVEView1:CURSor:CURSOR1:HBArs:APOSition? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:WAVEView1:CURSor:CURSOR1:HBArs:APOSition value command.
SCPI Syntax 
- DISplay:WAVEView1:CURSor:CURSOR1:HBArs:APOSition <NR3>
- DISplay:WAVEView1:CURSor:CURSOR1:HBArs:APOSition?
Info
  • <NR3> is the vertical cursor A position of the specified cursor in the specified Waveform View. 0.0 divisions is center, 5.0 top of the waveview, and -5.0 the bottom of the waveview.

DisplayWaveview1CursorCursor1HbarsAunits

Bases: SCPICmdRead

The DISplay:WAVEView1:CURSor:CURSOR1:HBArs:AUNIts command.

Description
  • This command queries the cursor A vertical units of the specified cursor in the specified Waveform View.
Usage
  • Using the .query() method will send the DISplay:WAVEView1:CURSor:CURSOR1:HBArs:AUNIts? query.
  • Using the .verify(value) method will send the DISplay:WAVEView1:CURSor:CURSOR1:HBArs:AUNIts? query and raise an AssertionError if the returned value does not match value.
SCPI Syntax 
- DISplay:WAVEView1:CURSor:CURSOR1:HBArs:AUNIts?
Info
  • <QString> is the cursor A vertical units of the specified cursor in the specified Waveform View.

DisplayWaveview1CursorCursor1HbarsBposition

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:WAVEView1:CURSor:CURSOR1:HBArs:BPOSition command.

Description
  • Sets or queries the HBARs vertical B position of the specified cursor in the specified Waveform View.
Usage
  • Using the .query() method will send the DISplay:WAVEView1:CURSor:CURSOR1:HBArs:BPOSition? query.
  • Using the .verify(value) method will send the DISplay:WAVEView1:CURSor:CURSOR1:HBArs:BPOSition? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:WAVEView1:CURSor:CURSOR1:HBArs:BPOSition value command.
SCPI Syntax 
- DISplay:WAVEView1:CURSor:CURSOR1:HBArs:BPOSition <NR3>
- DISplay:WAVEView1:CURSor:CURSOR1:HBArs:BPOSition?
Info
  • <NR3> is the vertical cursor B position of the specified cursor in the specified Waveform View.

DisplayWaveview1CursorCursor1HbarsBunits

Bases: SCPICmdRead

The DISplay:WAVEView1:CURSor:CURSOR1:HBArs:BUNIts command.

Description
  • This command queries the cursor B vertical units of the specified cursor in the specified Waveform View.
Usage
  • Using the .query() method will send the DISplay:WAVEView1:CURSor:CURSOR1:HBArs:BUNIts? query.
  • Using the .verify(value) method will send the DISplay:WAVEView1:CURSor:CURSOR1:HBArs:BUNIts? query and raise an AssertionError if the returned value does not match value.
SCPI Syntax 
- DISplay:WAVEView1:CURSor:CURSOR1:HBArs:BUNIts?

DisplayWaveview1CursorCursor1HbarsDelta

Bases: SCPICmdRead

The DISplay:WAVEView1:CURSor:CURSOR1:HBArs:DELTa command.

Description
  • This command queries the delta V cursor readout value of the specified cursor in the specified Waveform View.
Usage
  • Using the .query() method will send the DISplay:WAVEView1:CURSor:CURSOR1:HBArs:DELTa? query.
  • Using the .verify(value) method will send the DISplay:WAVEView1:CURSor:CURSOR1:HBArs:DELTa? query and raise an AssertionError if the returned value does not match value.
SCPI Syntax 
- DISplay:WAVEView1:CURSor:CURSOR1:HBArs:DELTa?

DisplayWaveview1CursorCursor1Mode

Bases: SCPICmdWrite

The DISplay:WAVEView1:CURSor:CURSOR1:MODe command.

Description
  • Sets or queries the cursor tracking mode of the specified cursor in the specified Waveform View.
Usage
  • Using the .write(value) method will send the DISplay:WAVEView1:CURSor:CURSOR1:MODe value command.
SCPI Syntax 
- DISplay:WAVEView1:CURSor:CURSOR1:MODe {INDEPENDENT|TRACK}
Info
  • TRACK ties the navigational functionality of the two cursors together. For cursor 1 adjustments, this ties the movement of the two cursors together; however, cursor 2 continues to move independently of cursor 1.
  • INDEPENDENT allows independent adjustment of the two cursors.

DisplayWaveview1CursorCursor1Oneoverdeltatvalue

Bases: SCPICmdRead

The DISplay:WAVEView1:CURSor:CURSOR1:ONEOVERDELTATVALUE command.

Description
  • This query returns the one over delta T cursor readout value of the specified cursor in the specified Waveform View.
Usage
  • Using the .query() method will send the DISplay:WAVEView1:CURSor:CURSOR1:ONEOVERDELTATVALUE? query.
  • Using the .verify(value) method will send the DISplay:WAVEView1:CURSor:CURSOR1:ONEOVERDELTATVALUE? query and raise an AssertionError if the returned value does not match value.
SCPI Syntax 
- DISplay:WAVEView1:CURSor:CURSOR1:ONEOVERDELTATVALUE?

DisplayWaveview1CursorCursor1Screen

Bases: SCPICmdRead

The DISplay:WAVEView1:CURSor:CURSOR1:SCREEN command tree.

Usage
  • Using the .query() method will send the DISplay:WAVEView1:CURSor:CURSOR1:SCREEN? query.
  • Using the .verify(value) method will send the DISplay:WAVEView1:CURSor:CURSOR1:SCREEN? query and raise an AssertionError if the returned value does not match value.
Properties
  • .axposition: The DISplay:WAVEView1:CURSor:CURSOR1:SCREEN:AXPOSition command.
  • .ayposition: The DISplay:WAVEView1:CURSor:CURSOR1:SCREEN:AYPOSition command.
  • .bxposition: The DISplay:WAVEView1:CURSor:CURSOR1:SCREEN:BXPOSition command.
  • .byposition: The DISplay:WAVEView1:CURSor:CURSOR1:SCREEN:BYPOSition command.

axposition property 

axposition: DisplayWaveview1CursorCursor1ScreenAxposition

Return the DISplay:WAVEView1:CURSor:CURSOR1:SCREEN:AXPOSition command.

Description
  • Sets or queries the horizontal cursor A position of the specified cursor in the specified Waveform View.
Usage
  • Using the .query() method will send the DISplay:WAVEView1:CURSor:CURSOR1:SCREEN:AXPOSition? query.
  • Using the .verify(value) method will send the DISplay:WAVEView1:CURSor:CURSOR1:SCREEN:AXPOSition? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:WAVEView1:CURSor:CURSOR1:SCREEN:AXPOSition value command.
SCPI Syntax 
- DISplay:WAVEView1:CURSor:CURSOR1:SCREEN:AXPOSition <NR3>
- DISplay:WAVEView1:CURSor:CURSOR1:SCREEN:AXPOSition?
Info
  • <NR3> is the horizontal cursor A position of the specified cursor in the specified Waveform View.

ayposition property 

ayposition: DisplayWaveview1CursorCursor1ScreenAyposition

Return the DISplay:WAVEView1:CURSor:CURSOR1:SCREEN:AYPOSition command.

Description
  • This command sets or queries the vertical cursor A position of the specified cursor in the specified Waveform View.
Usage
  • Using the .query() method will send the DISplay:WAVEView1:CURSor:CURSOR1:SCREEN:AYPOSition? query.
  • Using the .verify(value) method will send the DISplay:WAVEView1:CURSor:CURSOR1:SCREEN:AYPOSition? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:WAVEView1:CURSor:CURSOR1:SCREEN:AYPOSition value command.
SCPI Syntax 
- DISplay:WAVEView1:CURSor:CURSOR1:SCREEN:AYPOSition <NR3>
- DISplay:WAVEView1:CURSor:CURSOR1:SCREEN:AYPOSition?
Info
  • <NR3> the vertical cursor A position of the specified cursor in the specified Waveform View.

bxposition property 

bxposition: DisplayWaveview1CursorCursor1ScreenBxposition

Return the DISplay:WAVEView1:CURSor:CURSOR1:SCREEN:BXPOSition command.

Description
  • Sets or queries the horizontal cursor B position of the specified cursor in the specified Waveform View.
Usage
  • Using the .query() method will send the DISplay:WAVEView1:CURSor:CURSOR1:SCREEN:BXPOSition? query.
  • Using the .verify(value) method will send the DISplay:WAVEView1:CURSor:CURSOR1:SCREEN:BXPOSition? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:WAVEView1:CURSor:CURSOR1:SCREEN:BXPOSition value command.
SCPI Syntax 
- DISplay:WAVEView1:CURSor:CURSOR1:SCREEN:BXPOSition <NR3>
- DISplay:WAVEView1:CURSor:CURSOR1:SCREEN:BXPOSition?
Info
  • <NR3> is the horizontal cursor B position of the specified cursor in the specified Waveform View.

byposition property 

byposition: DisplayWaveview1CursorCursor1ScreenByposition

Return the DISplay:WAVEView1:CURSor:CURSOR1:SCREEN:BYPOSition command.

Description
  • This command sets or queries the vertical cursor B position of the specified cursor in the specified Waveform View.
Usage
  • Using the .query() method will send the DISplay:WAVEView1:CURSor:CURSOR1:SCREEN:BYPOSition? query.
  • Using the .verify(value) method will send the DISplay:WAVEView1:CURSor:CURSOR1:SCREEN:BYPOSition? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:WAVEView1:CURSor:CURSOR1:SCREEN:BYPOSition value command.
SCPI Syntax 
- DISplay:WAVEView1:CURSor:CURSOR1:SCREEN:BYPOSition <NR3>
- DISplay:WAVEView1:CURSor:CURSOR1:SCREEN:BYPOSition?
Info
  • <NR3> the vertical cursor B position of the specified cursor in the specified Waveform View.

DisplayWaveview1CursorCursor1ScreenAxposition

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:WAVEView1:CURSor:CURSOR1:SCREEN:AXPOSition command.

Description
  • Sets or queries the horizontal cursor A position of the specified cursor in the specified Waveform View.
Usage
  • Using the .query() method will send the DISplay:WAVEView1:CURSor:CURSOR1:SCREEN:AXPOSition? query.
  • Using the .verify(value) method will send the DISplay:WAVEView1:CURSor:CURSOR1:SCREEN:AXPOSition? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:WAVEView1:CURSor:CURSOR1:SCREEN:AXPOSition value command.
SCPI Syntax 
- DISplay:WAVEView1:CURSor:CURSOR1:SCREEN:AXPOSition <NR3>
- DISplay:WAVEView1:CURSor:CURSOR1:SCREEN:AXPOSition?
Info
  • <NR3> is the horizontal cursor A position of the specified cursor in the specified Waveform View.

DisplayWaveview1CursorCursor1ScreenAyposition

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:WAVEView1:CURSor:CURSOR1:SCREEN:AYPOSition command.

Description
  • This command sets or queries the vertical cursor A position of the specified cursor in the specified Waveform View.
Usage
  • Using the .query() method will send the DISplay:WAVEView1:CURSor:CURSOR1:SCREEN:AYPOSition? query.
  • Using the .verify(value) method will send the DISplay:WAVEView1:CURSor:CURSOR1:SCREEN:AYPOSition? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:WAVEView1:CURSor:CURSOR1:SCREEN:AYPOSition value command.
SCPI Syntax 
- DISplay:WAVEView1:CURSor:CURSOR1:SCREEN:AYPOSition <NR3>
- DISplay:WAVEView1:CURSor:CURSOR1:SCREEN:AYPOSition?
Info
  • <NR3> the vertical cursor A position of the specified cursor in the specified Waveform View.

DisplayWaveview1CursorCursor1ScreenBxposition

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:WAVEView1:CURSor:CURSOR1:SCREEN:BXPOSition command.

Description
  • Sets or queries the horizontal cursor B position of the specified cursor in the specified Waveform View.
Usage
  • Using the .query() method will send the DISplay:WAVEView1:CURSor:CURSOR1:SCREEN:BXPOSition? query.
  • Using the .verify(value) method will send the DISplay:WAVEView1:CURSor:CURSOR1:SCREEN:BXPOSition? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:WAVEView1:CURSor:CURSOR1:SCREEN:BXPOSition value command.
SCPI Syntax 
- DISplay:WAVEView1:CURSor:CURSOR1:SCREEN:BXPOSition <NR3>
- DISplay:WAVEView1:CURSor:CURSOR1:SCREEN:BXPOSition?
Info
  • <NR3> is the horizontal cursor B position of the specified cursor in the specified Waveform View.

DisplayWaveview1CursorCursor1ScreenByposition

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:WAVEView1:CURSor:CURSOR1:SCREEN:BYPOSition command.

Description
  • This command sets or queries the vertical cursor B position of the specified cursor in the specified Waveform View.
Usage
  • Using the .query() method will send the DISplay:WAVEView1:CURSor:CURSOR1:SCREEN:BYPOSition? query.
  • Using the .verify(value) method will send the DISplay:WAVEView1:CURSor:CURSOR1:SCREEN:BYPOSition? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:WAVEView1:CURSor:CURSOR1:SCREEN:BYPOSition value command.
SCPI Syntax 
- DISplay:WAVEView1:CURSor:CURSOR1:SCREEN:BYPOSition <NR3>
- DISplay:WAVEView1:CURSor:CURSOR1:SCREEN:BYPOSition?
Info
  • <NR3> the vertical cursor B position of the specified cursor in the specified Waveform View.

DisplayWaveview1CursorCursor1Splitmode

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:WAVEView1:CURSor:CURSOR1:SPLITMODE command.

Description
  • This command sets or queries whether both cursors have the same or different sources.
Usage
  • Using the .query() method will send the DISplay:WAVEView1:CURSor:CURSOR1:SPLITMODE? query.
  • Using the .verify(value) method will send the DISplay:WAVEView1:CURSor:CURSOR1:SPLITMODE? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:WAVEView1:CURSor:CURSOR1:SPLITMODE value command.
SCPI Syntax 
- DISplay:WAVEView1:CURSor:CURSOR1:SPLITMODE {SAME|SPLIT}
- DISplay:WAVEView1:CURSor:CURSOR1:SPLITMODE?
Info
  • SAME specifies both cursors have the same source.
  • SPLIT specifies the cursors have different sources.

DisplayWaveview1CursorCursor1State

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:WAVEView1:CURSor:CURSOR1:STATE command.

Description
  • This command sets or queries the visible state of the specified cursor in the specified Waveform View.
Usage
  • Using the .query() method will send the DISplay:WAVEView1:CURSor:CURSOR1:STATE? query.
  • Using the .verify(value) method will send the DISplay:WAVEView1:CURSor:CURSOR1:STATE? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:WAVEView1:CURSor:CURSOR1:STATE value command.
SCPI Syntax 
- DISplay:WAVEView1:CURSor:CURSOR1:STATE {ON|OFF|<NR1>}
- DISplay:WAVEView1:CURSor:CURSOR1:STATE?
Info
  • <NR1> = 0 disables the specified cursor in the specified Waveform View; any other value turns this feature on.
  • OFF disables the specified cursor in the specified Waveform View.
  • ON enables the specified cursor in the specified Waveform View.

DisplayWaveview1CursorCursor1Vbars

Bases: SCPICmdRead

The DISplay:WAVEView1:CURSor:CURSOR1:VBArs command tree.

Usage
  • Using the .query() method will send the DISplay:WAVEView1:CURSor:CURSOR1:VBArs? query.
  • Using the .verify(value) method will send the DISplay:WAVEView1:CURSor:CURSOR1:VBArs? query and raise an AssertionError if the returned value does not match value.
Properties
  • .aposition: The DISplay:WAVEView1:CURSor:CURSOR1:VBArs:APOSition command.
  • .bposition: The DISplay:WAVEView1:CURSor:CURSOR1:VBArs:BPOSition command.
  • .delta: The DISplay:WAVEView1:CURSor:CURSOR1:VBArs:DELTa command.
  • .units: The DISplay:WAVEView1:CURSor:CURSOR1:VBArs:UNIts command.

aposition property 

aposition: DisplayWaveview1CursorCursor1VbarsAposition

Return the DISplay:WAVEView1:CURSor:CURSOR1:VBArs:APOSition command.

Description
  • This command sets or queries the cursor A horizontal position of the specified cursor in the specified Waveform View.
Usage
  • Using the .query() method will send the DISplay:WAVEView1:CURSor:CURSOR1:VBArs:APOSition? query.
  • Using the .verify(value) method will send the DISplay:WAVEView1:CURSor:CURSOR1:VBArs:APOSition? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:WAVEView1:CURSor:CURSOR1:VBArs:APOSition value command.
SCPI Syntax 
- DISplay:WAVEView1:CURSor:CURSOR1:VBArs:APOSition <NR3>
- DISplay:WAVEView1:CURSor:CURSOR1:VBArs:APOSition?
Info
  • <NR3> is the horizontal cursor A position of the specified cursor in the specified Waveform View.

bposition property 

bposition: DisplayWaveview1CursorCursor1VbarsBposition

Return the DISplay:WAVEView1:CURSor:CURSOR1:VBArs:BPOSition command.

Description
  • This command sets or queries the cursor B horizontal position of the specified cursor in the specified Waveform View.
Usage
  • Using the .query() method will send the DISplay:WAVEView1:CURSor:CURSOR1:VBArs:BPOSition? query.
  • Using the .verify(value) method will send the DISplay:WAVEView1:CURSor:CURSOR1:VBArs:BPOSition? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:WAVEView1:CURSor:CURSOR1:VBArs:BPOSition value command.
SCPI Syntax 
- DISplay:WAVEView1:CURSor:CURSOR1:VBArs:BPOSition <NR3>
- DISplay:WAVEView1:CURSor:CURSOR1:VBArs:BPOSition?
Info
  • <NR3> is the horizontal cursor B position of the specified cursor in the specified Waveform View.

delta property 

delta: DisplayWaveview1CursorCursor1VbarsDelta

Return the DISplay:WAVEView1:CURSor:CURSOR1:VBArs:DELTa command.

Description
  • This query sets or returns the delta T cursor readout value of the specified cursor in the specified Waveform View.
Usage
  • Using the .query() method will send the DISplay:WAVEView1:CURSor:CURSOR1:VBArs:DELTa? query.
  • Using the .verify(value) method will send the DISplay:WAVEView1:CURSor:CURSOR1:VBArs:DELTa? query and raise an AssertionError if the returned value does not match value.
SCPI Syntax 
- DISplay:WAVEView1:CURSor:CURSOR1:VBArs:DELTa?

units property 

units: DisplayWaveview1CursorCursor1VbarsUnits

Return the DISplay:WAVEView1:CURSor:CURSOR1:VBArs:UNIts command.

Description
  • This query returns cursor A vertical units of the specified cursor in the specified Waveform View.
Usage
  • Using the .query() method will send the DISplay:WAVEView1:CURSor:CURSOR1:VBArs:UNIts? query.
  • Using the .verify(value) method will send the DISplay:WAVEView1:CURSor:CURSOR1:VBArs:UNIts? query and raise an AssertionError if the returned value does not match value.
SCPI Syntax 
- DISplay:WAVEView1:CURSor:CURSOR1:VBArs:UNIts?

DisplayWaveview1CursorCursor1VbarsAposition

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:WAVEView1:CURSor:CURSOR1:VBArs:APOSition command.

Description
  • This command sets or queries the cursor A horizontal position of the specified cursor in the specified Waveform View.
Usage
  • Using the .query() method will send the DISplay:WAVEView1:CURSor:CURSOR1:VBArs:APOSition? query.
  • Using the .verify(value) method will send the DISplay:WAVEView1:CURSor:CURSOR1:VBArs:APOSition? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:WAVEView1:CURSor:CURSOR1:VBArs:APOSition value command.
SCPI Syntax 
- DISplay:WAVEView1:CURSor:CURSOR1:VBArs:APOSition <NR3>
- DISplay:WAVEView1:CURSor:CURSOR1:VBArs:APOSition?
Info
  • <NR3> is the horizontal cursor A position of the specified cursor in the specified Waveform View.

DisplayWaveview1CursorCursor1VbarsBposition

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:WAVEView1:CURSor:CURSOR1:VBArs:BPOSition command.

Description
  • This command sets or queries the cursor B horizontal position of the specified cursor in the specified Waveform View.
Usage
  • Using the .query() method will send the DISplay:WAVEView1:CURSor:CURSOR1:VBArs:BPOSition? query.
  • Using the .verify(value) method will send the DISplay:WAVEView1:CURSor:CURSOR1:VBArs:BPOSition? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:WAVEView1:CURSor:CURSOR1:VBArs:BPOSition value command.
SCPI Syntax 
- DISplay:WAVEView1:CURSor:CURSOR1:VBArs:BPOSition <NR3>
- DISplay:WAVEView1:CURSor:CURSOR1:VBArs:BPOSition?
Info
  • <NR3> is the horizontal cursor B position of the specified cursor in the specified Waveform View.

DisplayWaveview1CursorCursor1VbarsDelta

Bases: SCPICmdRead

The DISplay:WAVEView1:CURSor:CURSOR1:VBArs:DELTa command.

Description
  • This query sets or returns the delta T cursor readout value of the specified cursor in the specified Waveform View.
Usage
  • Using the .query() method will send the DISplay:WAVEView1:CURSor:CURSOR1:VBArs:DELTa? query.
  • Using the .verify(value) method will send the DISplay:WAVEView1:CURSor:CURSOR1:VBArs:DELTa? query and raise an AssertionError if the returned value does not match value.
SCPI Syntax 
- DISplay:WAVEView1:CURSor:CURSOR1:VBArs:DELTa?

DisplayWaveview1CursorCursor1VbarsUnits

Bases: SCPICmdRead

The DISplay:WAVEView1:CURSor:CURSOR1:VBArs:UNIts command.

Description
  • This query returns cursor A vertical units of the specified cursor in the specified Waveform View.
Usage
  • Using the .query() method will send the DISplay:WAVEView1:CURSor:CURSOR1:VBArs:UNIts? query.
  • Using the .verify(value) method will send the DISplay:WAVEView1:CURSor:CURSOR1:VBArs:UNIts? query and raise an AssertionError if the returned value does not match value.
SCPI Syntax 
- DISplay:WAVEView1:CURSor:CURSOR1:VBArs:UNIts?

DisplayWaveview1CursorCursor1Waveform

Bases: SCPICmdRead

The DISplay:WAVEView1:CURSor:CURSOR1:WAVEform command tree.

Usage
  • Using the .query() method will send the DISplay:WAVEView1:CURSor:CURSOR1:WAVEform? query.
  • Using the .verify(value) method will send the DISplay:WAVEView1:CURSor:CURSOR1:WAVEform? query and raise an AssertionError if the returned value does not match value.
Properties
  • .aposition: The DISplay:WAVEView1:CURSor:CURSOR1:WAVEform:APOSition command.
  • .bposition: The DISplay:WAVEView1:CURSor:CURSOR1:WAVEform:BPOSition command.

aposition property 

aposition: DisplayWaveview1CursorCursor1WaveformAposition

Return the DISplay:WAVEView1:CURSor:CURSOR1:WAVEform:APOSition command.

Description
  • This command sets or queries the horizontal cursor A position of the specified cursor in the specified Waveform View.
Usage
  • Using the .query() method will send the DISplay:WAVEView1:CURSor:CURSOR1:WAVEform:APOSition? query.
  • Using the .verify(value) method will send the DISplay:WAVEView1:CURSor:CURSOR1:WAVEform:APOSition? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:WAVEView1:CURSor:CURSOR1:WAVEform:APOSition value command.
SCPI Syntax 
- DISplay:WAVEView1:CURSor:CURSOR1:WAVEform:APOSition <NR3>
- DISplay:WAVEView1:CURSor:CURSOR1:WAVEform:APOSition?
Info
  • <NR3> is the horizontal cursor A position of the specified cursor in the specified Waveform View.

bposition property 

bposition: DisplayWaveview1CursorCursor1WaveformBposition

Return the DISplay:WAVEView1:CURSor:CURSOR1:WAVEform:BPOSition command.

Description
  • This command sets or queries the horizontal cursor B position of the specified cursor in the specified Waveform View.
Usage
  • Using the .query() method will send the DISplay:WAVEView1:CURSor:CURSOR1:WAVEform:BPOSition? query.
  • Using the .verify(value) method will send the DISplay:WAVEView1:CURSor:CURSOR1:WAVEform:BPOSition? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:WAVEView1:CURSor:CURSOR1:WAVEform:BPOSition value command.
SCPI Syntax 
- DISplay:WAVEView1:CURSor:CURSOR1:WAVEform:BPOSition <NR3>
- DISplay:WAVEView1:CURSor:CURSOR1:WAVEform:BPOSition?
Info
  • <NR3> is the horizontal cursor B position of the specified cursor in the specified Waveform View.

DisplayWaveview1CursorCursor1WaveformAposition

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:WAVEView1:CURSor:CURSOR1:WAVEform:APOSition command.

Description
  • This command sets or queries the horizontal cursor A position of the specified cursor in the specified Waveform View.
Usage
  • Using the .query() method will send the DISplay:WAVEView1:CURSor:CURSOR1:WAVEform:APOSition? query.
  • Using the .verify(value) method will send the DISplay:WAVEView1:CURSor:CURSOR1:WAVEform:APOSition? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:WAVEView1:CURSor:CURSOR1:WAVEform:APOSition value command.
SCPI Syntax 
- DISplay:WAVEView1:CURSor:CURSOR1:WAVEform:APOSition <NR3>
- DISplay:WAVEView1:CURSor:CURSOR1:WAVEform:APOSition?
Info
  • <NR3> is the horizontal cursor A position of the specified cursor in the specified Waveform View.

DisplayWaveview1CursorCursor1WaveformBposition

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:WAVEView1:CURSor:CURSOR1:WAVEform:BPOSition command.

Description
  • This command sets or queries the horizontal cursor B position of the specified cursor in the specified Waveform View.
Usage
  • Using the .query() method will send the DISplay:WAVEView1:CURSor:CURSOR1:WAVEform:BPOSition? query.
  • Using the .verify(value) method will send the DISplay:WAVEView1:CURSor:CURSOR1:WAVEform:BPOSition? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:WAVEView1:CURSor:CURSOR1:WAVEform:BPOSition value command.
SCPI Syntax 
- DISplay:WAVEView1:CURSor:CURSOR1:WAVEform:BPOSition <NR3>
- DISplay:WAVEView1:CURSor:CURSOR1:WAVEform:BPOSition?
Info
  • <NR3> is the horizontal cursor B position of the specified cursor in the specified Waveform View.

DisplayWaveview1CursorCursorWaveform

Bases: SCPICmdRead

The DISplay:WAVEView1:CURSor:CURSOR:WAVEform command tree.

Usage
  • Using the .query() method will send the DISplay:WAVEView1:CURSor:CURSOR:WAVEform? query.
  • Using the .verify(value) method will send the DISplay:WAVEView1:CURSor:CURSOR:WAVEform? query and raise an AssertionError if the returned value does not match value.
Properties
  • .all: The DISplay:WAVEView1:CURSor:CURSOR:WAVEform:ALL command tree.
  • .avposition: The DISplay:WAVEView1:CURSor:CURSOR:WAVEform:AVPOSition command.
  • .bvposition: The DISplay:WAVEView1:CURSor:CURSOR:WAVEform:BVPOSition command.

all property 

all: DisplayWaveview1CursorCursorWaveformAll

Return the DISplay:WAVEView1:CURSor:CURSOR:WAVEform:ALL command tree.

Usage
  • Using the .query() method will send the DISplay:WAVEView1:CURSor:CURSOR:WAVEform:ALL? query.
  • Using the .verify(value) method will send the DISplay:WAVEView1:CURSor:CURSOR:WAVEform:ALL? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .values: The DISplay:WAVEView1:CURSor:CURSOR:WAVEform:ALL:Values command.

avposition property 

avposition: DisplayWaveview1CursorCursorWaveformAvposition

Return the DISplay:WAVEView1:CURSor:CURSOR:WAVEform:AVPOSition command.

Description
  • This command queries the vertical waveform value at the cursor A position in the specified Waveform View.
Usage
  • Using the .query() method will send the DISplay:WAVEView1:CURSor:CURSOR:WAVEform:AVPOSition? query.
  • Using the .verify(value) method will send the DISplay:WAVEView1:CURSor:CURSOR:WAVEform:AVPOSition? query and raise an AssertionError if the returned value does not match value.
SCPI Syntax 
- DISplay:WAVEView1:CURSor:CURSOR:WAVEform:AVPOSition?
Info
  • <NR3> is the horizontal cursor A position of the specified cursor in the specified Waveform View.

bvposition property 

bvposition: DisplayWaveview1CursorCursorWaveformBvposition

Return the DISplay:WAVEView1:CURSor:CURSOR:WAVEform:BVPOSition command.

Description
  • This command queries the vertical waveform value at the cursor B position in the specified Waveform View.
Usage
  • Using the .query() method will send the DISplay:WAVEView1:CURSor:CURSOR:WAVEform:BVPOSition? query.
  • Using the .verify(value) method will send the DISplay:WAVEView1:CURSor:CURSOR:WAVEform:BVPOSition? query and raise an AssertionError if the returned value does not match value.
SCPI Syntax 
- DISplay:WAVEView1:CURSor:CURSOR:WAVEform:BVPOSition?
Info
  • <NR3> is the horizontal cursor A position of the specified cursor in the specified Waveform View.

DisplayWaveview1CursorCursorWaveformAll

Bases: SCPICmdRead

The DISplay:WAVEView1:CURSor:CURSOR:WAVEform:ALL command tree.

Usage
  • Using the .query() method will send the DISplay:WAVEView1:CURSor:CURSOR:WAVEform:ALL? query.
  • Using the .verify(value) method will send the DISplay:WAVEView1:CURSor:CURSOR:WAVEform:ALL? query and raise an AssertionError if the returned value does not match value.
Properties
  • .values: The DISplay:WAVEView1:CURSor:CURSOR:WAVEform:ALL:Values command.

values property 

values: DisplayWaveview1CursorCursorWaveformAllValues

Return the DISplay:WAVEView1:CURSor:CURSOR:WAVEform:ALL:Values command.

Description
  • This query returns all values (Time, Voltage, Delta) associated with all the active sources in the Waveform View. 1 is the specified Waveform View and must be WAVEView1.
Usage
  • Using the .query() method will send the DISplay:WAVEView1:CURSor:CURSOR:WAVEform:ALL:Values? query.
  • Using the .verify(value) method will send the DISplay:WAVEView1:CURSor:CURSOR:WAVEform:ALL:Values? query and raise an AssertionError if the returned value does not match value.
SCPI Syntax 
- DISplay:WAVEView1:CURSor:CURSOR:WAVEform:ALL:Values?

DisplayWaveview1CursorCursorWaveformAllValues

Bases: SCPICmdRead

The DISplay:WAVEView1:CURSor:CURSOR:WAVEform:ALL:Values command.

Description
  • This query returns all values (Time, Voltage, Delta) associated with all the active sources in the Waveform View. 1 is the specified Waveform View and must be WAVEView1.
Usage
  • Using the .query() method will send the DISplay:WAVEView1:CURSor:CURSOR:WAVEform:ALL:Values? query.
  • Using the .verify(value) method will send the DISplay:WAVEView1:CURSor:CURSOR:WAVEform:ALL:Values? query and raise an AssertionError if the returned value does not match value.
SCPI Syntax 
- DISplay:WAVEView1:CURSor:CURSOR:WAVEform:ALL:Values?

DisplayWaveview1CursorCursorWaveformAvposition

Bases: SCPICmdRead

The DISplay:WAVEView1:CURSor:CURSOR:WAVEform:AVPOSition command.

Description
  • This command queries the vertical waveform value at the cursor A position in the specified Waveform View.
Usage
  • Using the .query() method will send the DISplay:WAVEView1:CURSor:CURSOR:WAVEform:AVPOSition? query.
  • Using the .verify(value) method will send the DISplay:WAVEView1:CURSor:CURSOR:WAVEform:AVPOSition? query and raise an AssertionError if the returned value does not match value.
SCPI Syntax 
- DISplay:WAVEView1:CURSor:CURSOR:WAVEform:AVPOSition?
Info
  • <NR3> is the horizontal cursor A position of the specified cursor in the specified Waveform View.

DisplayWaveview1CursorCursorWaveformBvposition

Bases: SCPICmdRead

The DISplay:WAVEView1:CURSor:CURSOR:WAVEform:BVPOSition command.

Description
  • This command queries the vertical waveform value at the cursor B position in the specified Waveform View.
Usage
  • Using the .query() method will send the DISplay:WAVEView1:CURSor:CURSOR:WAVEform:BVPOSition? query.
  • Using the .verify(value) method will send the DISplay:WAVEView1:CURSor:CURSOR:WAVEform:BVPOSition? query and raise an AssertionError if the returned value does not match value.
SCPI Syntax 
- DISplay:WAVEView1:CURSor:CURSOR:WAVEform:BVPOSition?
Info
  • <NR3> is the horizontal cursor A position of the specified cursor in the specified Waveform View.

DisplayWaveview1Filter

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:WAVEView1:FILTer command.

Description
  • This command sets or queries the type of interpolation filter for the display.
Usage
  • Using the .query() method will send the DISplay:WAVEView1:FILTer? query.
  • Using the .verify(value) method will send the DISplay:WAVEView1:FILTer? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:WAVEView1:FILTer value command.
SCPI Syntax 
- DISplay:WAVEView1:FILTer {SINX|LINear}
- DISplay:WAVEView1:FILTer?
Info
  • LINEAr specifies linear interpolation, where acquired points are connected with straight lines.
  • SINX specifies sin(x)/x interpolation, where acquired points are fit to a curve.

DisplayWaveview1Graticule

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:WAVEView1:GRAticule command.

Description
  • This command selects or queries the type of graticule that is displayed.
Usage
  • Using the .query() method will send the DISplay:WAVEView1:GRAticule? query.
  • Using the .verify(value) method will send the DISplay:WAVEView1:GRAticule? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:WAVEView1:GRAticule value command.
SCPI Syntax 
- DISplay:WAVEView1:GRAticule {GRId|TIMe|FULl|NONe}
- DISplay:WAVEView1:GRAticule?
Info
  • GRId specifies a frame and grid only.
  • TIMe specifies a time graticule only.
  • FULl specifies a frame, a grid and cross hairs.
  • NONe specified no graticule.

DisplayWaveview1Intensity

Bases: SCPICmdRead

The DISplay:WAVEView1:INTENSITy command tree.

Usage
  • Using the .query() method will send the DISplay:WAVEView1:INTENSITy? query.
  • Using the .verify(value) method will send the DISplay:WAVEView1:INTENSITy? query and raise an AssertionError if the returned value does not match value.
Properties
  • .graticule: The DISplay:WAVEView1:INTENSITy:GRATicule command.
  • .waveform: The DISplay:WAVEView1:INTENSITy:WAVEform command.

graticule property 

graticule: DisplayWaveview1IntensityGraticule

Return the DISplay:WAVEView1:INTENSITy:GRATicule command.

Description
  • This command sets or queries the graticule saturation level.
Usage
  • Using the .query() method will send the DISplay:WAVEView1:INTENSITy:GRATicule? query.
  • Using the .verify(value) method will send the DISplay:WAVEView1:INTENSITy:GRATicule? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:WAVEView1:INTENSITy:GRATicule value command.
SCPI Syntax 
- DISplay:WAVEView1:INTENSITy:GRATicule <NR2>
- DISplay:WAVEView1:INTENSITy:GRATicule?
Info
  • <NR2> is the graticule saturation level.

waveform property 

waveform: DisplayWaveview1IntensityWaveform

Return the DISplay:WAVEView1:INTENSITy:WAVEform command.

Description
  • This command sets or queries the waveform saturation level.
Usage
  • Using the .query() method will send the DISplay:WAVEView1:INTENSITy:WAVEform? query.
  • Using the .verify(value) method will send the DISplay:WAVEView1:INTENSITy:WAVEform? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:WAVEView1:INTENSITy:WAVEform value command.
SCPI Syntax 
- DISplay:WAVEView1:INTENSITy:WAVEform <NR2>
- DISplay:WAVEView1:INTENSITy:WAVEform?
Info
  • <NR2> is the waveform saturation level.

DisplayWaveview1IntensityGraticule

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:WAVEView1:INTENSITy:GRATicule command.

Description
  • This command sets or queries the graticule saturation level.
Usage
  • Using the .query() method will send the DISplay:WAVEView1:INTENSITy:GRATicule? query.
  • Using the .verify(value) method will send the DISplay:WAVEView1:INTENSITy:GRATicule? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:WAVEView1:INTENSITy:GRATicule value command.
SCPI Syntax 
- DISplay:WAVEView1:INTENSITy:GRATicule <NR2>
- DISplay:WAVEView1:INTENSITy:GRATicule?
Info
  • <NR2> is the graticule saturation level.

DisplayWaveview1IntensityWaveform

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:WAVEView1:INTENSITy:WAVEform command.

Description
  • This command sets or queries the waveform saturation level.
Usage
  • Using the .query() method will send the DISplay:WAVEView1:INTENSITy:WAVEform? query.
  • Using the .verify(value) method will send the DISplay:WAVEView1:INTENSITy:WAVEform? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:WAVEView1:INTENSITy:WAVEform value command.
SCPI Syntax 
- DISplay:WAVEView1:INTENSITy:WAVEform <NR2>
- DISplay:WAVEView1:INTENSITy:WAVEform?
Info
  • <NR2> is the waveform saturation level.

DisplayWaveview1Math

Bases: SCPICmdRead

The DISplay:WAVEView1:MATH command tree.

Usage
  • Using the .query() method will send the DISplay:WAVEView1:MATH? query.
  • Using the .verify(value) method will send the DISplay:WAVEView1:MATH? query and raise an AssertionError if the returned value does not match value.
Properties
  • .math: The DISplay:WAVEView1:MATH:MATH<x> command tree.

math property 

math: dict[int, DisplayWaveview1MathMathItem]

Return the DISplay:WAVEView1:MATH:MATH<x> command tree.

Usage
  • Using the .query() method will send the DISplay:WAVEView1:MATH:MATH<x>? query.
  • Using the .verify(value) method will send the DISplay:WAVEView1:MATH:MATH<x>? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .autoscale: The DISplay:WAVEView1:MATH:MATH<x>:AUTOScale command.
  • .state: The DISplay:WAVEView1:MATH:MATH<x>:STATE command.
  • .vertical: The DISplay:WAVEView1:MATH:MATH<x>:VERTical command tree.

DisplayWaveview1MathMathItem

Bases: ValidatedDynamicNumberCmd, SCPICmdRead

The DISplay:WAVEView1:MATH:MATH<x> command tree.

Usage
  • Using the .query() method will send the DISplay:WAVEView1:MATH:MATH<x>? query.
  • Using the .verify(value) method will send the DISplay:WAVEView1:MATH:MATH<x>? query and raise an AssertionError if the returned value does not match value.
Properties
  • .autoscale: The DISplay:WAVEView1:MATH:MATH<x>:AUTOScale command.
  • .state: The DISplay:WAVEView1:MATH:MATH<x>:STATE command.
  • .vertical: The DISplay:WAVEView1:MATH:MATH<x>:VERTical command tree.

autoscale property 

autoscale: DisplayWaveview1MathMathItemAutoscale

Return the DISplay:WAVEView1:MATH:MATH<x>:AUTOScale command.

Description
  • This command sets or queries whether the specified math gets auto-scaled when the math equation changes within the specified Waveform View.
Usage
  • Using the .query() method will send the DISplay:WAVEView1:MATH:MATH<x>:AUTOScale? query.
  • Using the .verify(value) method will send the DISplay:WAVEView1:MATH:MATH<x>:AUTOScale? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:WAVEView1:MATH:MATH<x>:AUTOScale value command.
SCPI Syntax 
- DISplay:WAVEView1:MATH:MATH<x>:AUTOScale {ON|OFF|<NR1>}
- DISplay:WAVEView1:MATH:MATH<x>:AUTOScale?
Info
  • <NR1> = 0 disables the autoscaling the math in the specified Waveform View; any other value turns this feature on.
  • OFF disables the autoscaling the math in the specified Waveform View.
  • ON enables the autoscaling the math in the specified Waveform View.

state property 

state: DisplayWaveview1MathMathItemState

Return the DISplay:WAVEView1:MATH:MATH<x>:STATE command.

Description
  • This command sets or queries the state of the specified math waveform in the specified Waveform View.
Usage
  • Using the .query() method will send the DISplay:WAVEView1:MATH:MATH<x>:STATE? query.
  • Using the .verify(value) method will send the DISplay:WAVEView1:MATH:MATH<x>:STATE? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:WAVEView1:MATH:MATH<x>:STATE value command.
SCPI Syntax 
- DISplay:WAVEView1:MATH:MATH<x>:STATE {ON|OFF|<NR1>}
- DISplay:WAVEView1:MATH:MATH<x>:STATE?
Info
  • <NR1> = 0 disables the specified math in the specified Waveform View; any other value turns this feature on.
  • OFF disables the specified math in the specified Waveform View.
  • ON enables the specified math in the specified Waveform View.

vertical property 

vertical: DisplayWaveview1MathMathItemVertical

Return the DISplay:WAVEView1:MATH:MATH<x>:VERTical command tree.

Usage
  • Using the .query() method will send the DISplay:WAVEView1:MATH:MATH<x>:VERTical? query.
  • Using the .verify(value) method will send the DISplay:WAVEView1:MATH:MATH<x>:VERTical? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .position: The DISplay:WAVEView1:MATH:MATH<x>:VERTical:POSition command.
  • .scale: The DISplay:WAVEView1:MATH:MATH<x>:VERTical:SCAle command.

DisplayWaveview1MathMathItemAutoscale

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:WAVEView1:MATH:MATH<x>:AUTOScale command.

Description
  • This command sets or queries whether the specified math gets auto-scaled when the math equation changes within the specified Waveform View.
Usage
  • Using the .query() method will send the DISplay:WAVEView1:MATH:MATH<x>:AUTOScale? query.
  • Using the .verify(value) method will send the DISplay:WAVEView1:MATH:MATH<x>:AUTOScale? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:WAVEView1:MATH:MATH<x>:AUTOScale value command.
SCPI Syntax 
- DISplay:WAVEView1:MATH:MATH<x>:AUTOScale {ON|OFF|<NR1>}
- DISplay:WAVEView1:MATH:MATH<x>:AUTOScale?
Info
  • <NR1> = 0 disables the autoscaling the math in the specified Waveform View; any other value turns this feature on.
  • OFF disables the autoscaling the math in the specified Waveform View.
  • ON enables the autoscaling the math in the specified Waveform View.

DisplayWaveview1MathMathItemState

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:WAVEView1:MATH:MATH<x>:STATE command.

Description
  • This command sets or queries the state of the specified math waveform in the specified Waveform View.
Usage
  • Using the .query() method will send the DISplay:WAVEView1:MATH:MATH<x>:STATE? query.
  • Using the .verify(value) method will send the DISplay:WAVEView1:MATH:MATH<x>:STATE? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:WAVEView1:MATH:MATH<x>:STATE value command.
SCPI Syntax 
- DISplay:WAVEView1:MATH:MATH<x>:STATE {ON|OFF|<NR1>}
- DISplay:WAVEView1:MATH:MATH<x>:STATE?
Info
  • <NR1> = 0 disables the specified math in the specified Waveform View; any other value turns this feature on.
  • OFF disables the specified math in the specified Waveform View.
  • ON enables the specified math in the specified Waveform View.

DisplayWaveview1MathMathItemVertical

Bases: SCPICmdRead

The DISplay:WAVEView1:MATH:MATH<x>:VERTical command tree.

Usage
  • Using the .query() method will send the DISplay:WAVEView1:MATH:MATH<x>:VERTical? query.
  • Using the .verify(value) method will send the DISplay:WAVEView1:MATH:MATH<x>:VERTical? query and raise an AssertionError if the returned value does not match value.
Properties
  • .position: The DISplay:WAVEView1:MATH:MATH<x>:VERTical:POSition command.
  • .scale: The DISplay:WAVEView1:MATH:MATH<x>:VERTical:SCAle command.

position property 

position: DisplayWaveview1MathMathItemVerticalPosition

Return the DISplay:WAVEView1:MATH:MATH<x>:VERTical:POSition command.

Description
  • This command sets or queries the vertical position in divisions of the specified math waveform in the specified Waveform View.
Usage
  • Using the .query() method will send the DISplay:WAVEView1:MATH:MATH<x>:VERTical:POSition? query.
  • Using the .verify(value) method will send the DISplay:WAVEView1:MATH:MATH<x>:VERTical:POSition? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:WAVEView1:MATH:MATH<x>:VERTical:POSition value command.
SCPI Syntax 
- DISplay:WAVEView1:MATH:MATH<x>:VERTical:POSition <NR3>
- DISplay:WAVEView1:MATH:MATH<x>:VERTical:POSition?
Info
  • <NR3> is the vertical position in divisions of the specified math waveform.

scale property 

scale: DisplayWaveview1MathMathItemVerticalScale

Return the DISplay:WAVEView1:MATH:MATH<x>:VERTical:SCAle command.

Description
  • Sets or queries the vertical scale of the specified math in volts per division within the specified Waveform View.
Usage
  • Using the .query() method will send the DISplay:WAVEView1:MATH:MATH<x>:VERTical:SCAle? query.
  • Using the .verify(value) method will send the DISplay:WAVEView1:MATH:MATH<x>:VERTical:SCAle? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:WAVEView1:MATH:MATH<x>:VERTical:SCAle value command.
SCPI Syntax 
- DISplay:WAVEView1:MATH:MATH<x>:VERTical:SCAle <NR3>
- DISplay:WAVEView1:MATH:MATH<x>:VERTical:SCAle?
Info
  • <NR3> is the vertical scale of the specified math waveform.

DisplayWaveview1MathMathItemVerticalPosition

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:WAVEView1:MATH:MATH<x>:VERTical:POSition command.

Description
  • This command sets or queries the vertical position in divisions of the specified math waveform in the specified Waveform View.
Usage
  • Using the .query() method will send the DISplay:WAVEView1:MATH:MATH<x>:VERTical:POSition? query.
  • Using the .verify(value) method will send the DISplay:WAVEView1:MATH:MATH<x>:VERTical:POSition? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:WAVEView1:MATH:MATH<x>:VERTical:POSition value command.
SCPI Syntax 
- DISplay:WAVEView1:MATH:MATH<x>:VERTical:POSition <NR3>
- DISplay:WAVEView1:MATH:MATH<x>:VERTical:POSition?
Info
  • <NR3> is the vertical position in divisions of the specified math waveform.

DisplayWaveview1MathMathItemVerticalScale

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:WAVEView1:MATH:MATH<x>:VERTical:SCAle command.

Description
  • Sets or queries the vertical scale of the specified math in volts per division within the specified Waveform View.
Usage
  • Using the .query() method will send the DISplay:WAVEView1:MATH:MATH<x>:VERTical:SCAle? query.
  • Using the .verify(value) method will send the DISplay:WAVEView1:MATH:MATH<x>:VERTical:SCAle? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:WAVEView1:MATH:MATH<x>:VERTical:SCAle value command.
SCPI Syntax 
- DISplay:WAVEView1:MATH:MATH<x>:VERTical:SCAle <NR3>
- DISplay:WAVEView1:MATH:MATH<x>:VERTical:SCAle?
Info
  • <NR3> is the vertical scale of the specified math waveform.

DisplayWaveview1Plot

Bases: SCPICmdRead

The DISplay:WAVEView1:PLOT command tree.

Usage
  • Using the .query() method will send the DISplay:WAVEView1:PLOT? query.
  • Using the .verify(value) method will send the DISplay:WAVEView1:PLOT? query and raise an AssertionError if the returned value does not match value.
Properties
  • .plot: The DISplay:WAVEView1:PLOT:PLOT<x> command tree.

plot property 

plot: dict[int, DisplayWaveview1PlotPlotItem]

Return the DISplay:WAVEView1:PLOT:PLOT<x> command tree.

Usage
  • Using the .query() method will send the DISplay:WAVEView1:PLOT:PLOT<x>? query.
  • Using the .verify(value) method will send the DISplay:WAVEView1:PLOT:PLOT<x>? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .autoscale: The DISplay:WAVEView1:PLOT:PLOT<x>:AUTOScale command.
  • .state: The DISplay:WAVEView1:PLOT:PLOT<x>:STATE command.
  • .vertical: The DISplay:WAVEView1:PLOT:PLOT<x>:VERTical command tree.

DisplayWaveview1PlotPlotItem

Bases: ValidatedDynamicNumberCmd, SCPICmdRead

The DISplay:WAVEView1:PLOT:PLOT<x> command tree.

Usage
  • Using the .query() method will send the DISplay:WAVEView1:PLOT:PLOT<x>? query.
  • Using the .verify(value) method will send the DISplay:WAVEView1:PLOT:PLOT<x>? query and raise an AssertionError if the returned value does not match value.
Properties
  • .autoscale: The DISplay:WAVEView1:PLOT:PLOT<x>:AUTOScale command.
  • .state: The DISplay:WAVEView1:PLOT:PLOT<x>:STATE command.
  • .vertical: The DISplay:WAVEView1:PLOT:PLOT<x>:VERTical command tree.

autoscale property 

autoscale: DisplayWaveview1PlotPlotItemAutoscale

Return the DISplay:WAVEView1:PLOT:PLOT<x>:AUTOScale command.

Description
  • This command sets or queries whether the specified trend gets auto-scaled when the new data is available within the specified Waveform View.
Usage
  • Using the .query() method will send the DISplay:WAVEView1:PLOT:PLOT<x>:AUTOScale? query.
  • Using the .verify(value) method will send the DISplay:WAVEView1:PLOT:PLOT<x>:AUTOScale? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:WAVEView1:PLOT:PLOT<x>:AUTOScale value command.
SCPI Syntax 
- DISplay:WAVEView1:PLOT:PLOT<x>:AUTOScale {ON|OFF|<NR1>}
- DISplay:WAVEView1:PLOT:PLOT<x>:AUTOScale?
Info
  • <NR1> = 0 disables auto-scaling the specified plot in the specified Waveform View; any other value turns this feature on.
  • OFF disables auto-scaling the specified plot in the specified Waveform View.
  • ON enables auto-scaling the specified plot in the specified Waveform View.

state property 

state: DisplayWaveview1PlotPlotItemState

Return the DISplay:WAVEView1:PLOT:PLOT<x>:STATE command.

Description
  • This command sets or queries the state of the specified time trend plot waveform in the specified Waveform View.
Usage
  • Using the .query() method will send the DISplay:WAVEView1:PLOT:PLOT<x>:STATE? query.
  • Using the .verify(value) method will send the DISplay:WAVEView1:PLOT:PLOT<x>:STATE? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:WAVEView1:PLOT:PLOT<x>:STATE value command.
SCPI Syntax 
- DISplay:WAVEView1:PLOT:PLOT<x>:STATE {ON|OFF|<NR1>}
- DISplay:WAVEView1:PLOT:PLOT<x>:STATE?
Info
  • <NR1> = 0 disables the specified plot in the specified Waveform View; any other value turns this feature on.
  • OFF disables the specified plot in the specified Waveform View.
  • ON enables the specified plot in the specified Waveform View.

vertical property 

vertical: DisplayWaveview1PlotPlotItemVertical

Return the DISplay:WAVEView1:PLOT:PLOT<x>:VERTical command tree.

Usage
  • Using the .query() method will send the DISplay:WAVEView1:PLOT:PLOT<x>:VERTical? query.
  • Using the .verify(value) method will send the DISplay:WAVEView1:PLOT:PLOT<x>:VERTical? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .position: The DISplay:WAVEView1:PLOT:PLOT<x>:VERTical:POSition command.
  • .scale: The DISplay:WAVEView1:PLOT:PLOT<x>:VERTical:SCAle command.

DisplayWaveview1PlotPlotItemAutoscale

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:WAVEView1:PLOT:PLOT<x>:AUTOScale command.

Description
  • This command sets or queries whether the specified trend gets auto-scaled when the new data is available within the specified Waveform View.
Usage
  • Using the .query() method will send the DISplay:WAVEView1:PLOT:PLOT<x>:AUTOScale? query.
  • Using the .verify(value) method will send the DISplay:WAVEView1:PLOT:PLOT<x>:AUTOScale? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:WAVEView1:PLOT:PLOT<x>:AUTOScale value command.
SCPI Syntax 
- DISplay:WAVEView1:PLOT:PLOT<x>:AUTOScale {ON|OFF|<NR1>}
- DISplay:WAVEView1:PLOT:PLOT<x>:AUTOScale?
Info
  • <NR1> = 0 disables auto-scaling the specified plot in the specified Waveform View; any other value turns this feature on.
  • OFF disables auto-scaling the specified plot in the specified Waveform View.
  • ON enables auto-scaling the specified plot in the specified Waveform View.

DisplayWaveview1PlotPlotItemState

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:WAVEView1:PLOT:PLOT<x>:STATE command.

Description
  • This command sets or queries the state of the specified time trend plot waveform in the specified Waveform View.
Usage
  • Using the .query() method will send the DISplay:WAVEView1:PLOT:PLOT<x>:STATE? query.
  • Using the .verify(value) method will send the DISplay:WAVEView1:PLOT:PLOT<x>:STATE? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:WAVEView1:PLOT:PLOT<x>:STATE value command.
SCPI Syntax 
- DISplay:WAVEView1:PLOT:PLOT<x>:STATE {ON|OFF|<NR1>}
- DISplay:WAVEView1:PLOT:PLOT<x>:STATE?
Info
  • <NR1> = 0 disables the specified plot in the specified Waveform View; any other value turns this feature on.
  • OFF disables the specified plot in the specified Waveform View.
  • ON enables the specified plot in the specified Waveform View.

DisplayWaveview1PlotPlotItemVertical

Bases: SCPICmdRead

The DISplay:WAVEView1:PLOT:PLOT<x>:VERTical command tree.

Usage
  • Using the .query() method will send the DISplay:WAVEView1:PLOT:PLOT<x>:VERTical? query.
  • Using the .verify(value) method will send the DISplay:WAVEView1:PLOT:PLOT<x>:VERTical? query and raise an AssertionError if the returned value does not match value.
Properties
  • .position: The DISplay:WAVEView1:PLOT:PLOT<x>:VERTical:POSition command.
  • .scale: The DISplay:WAVEView1:PLOT:PLOT<x>:VERTical:SCAle command.

position property 

position: DisplayWaveview1PlotPlotItemVerticalPosition

Return the DISplay:WAVEView1:PLOT:PLOT<x>:VERTical:POSition command.

Description
  • This command sets or queries the vertical position of the specified time trend in the specified Waveform View in absolute units.
Usage
  • Using the .query() method will send the DISplay:WAVEView1:PLOT:PLOT<x>:VERTical:POSition? query.
  • Using the .verify(value) method will send the DISplay:WAVEView1:PLOT:PLOT<x>:VERTical:POSition? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:WAVEView1:PLOT:PLOT<x>:VERTical:POSition value command.
SCPI Syntax 
- DISplay:WAVEView1:PLOT:PLOT<x>:VERTical:POSition <NR3>
- DISplay:WAVEView1:PLOT:PLOT<x>:VERTical:POSition?
Info
  • <NR3> is the vertical position.

scale property 

scale: DisplayWaveview1PlotPlotItemVerticalScale

Return the DISplay:WAVEView1:PLOT:PLOT<x>:VERTical:SCAle command.

Description
  • This command sets or queries the vertical scale of the specified time trend in units per division in the specified Waveform View.
Usage
  • Using the .query() method will send the DISplay:WAVEView1:PLOT:PLOT<x>:VERTical:SCAle? query.
  • Using the .verify(value) method will send the DISplay:WAVEView1:PLOT:PLOT<x>:VERTical:SCAle? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:WAVEView1:PLOT:PLOT<x>:VERTical:SCAle value command.
SCPI Syntax 
- DISplay:WAVEView1:PLOT:PLOT<x>:VERTical:SCAle <NR3>
- DISplay:WAVEView1:PLOT:PLOT<x>:VERTical:SCAle?
Info
  • <NR3> is the vertical scale.

DisplayWaveview1PlotPlotItemVerticalPosition

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:WAVEView1:PLOT:PLOT<x>:VERTical:POSition command.

Description
  • This command sets or queries the vertical position of the specified time trend in the specified Waveform View in absolute units.
Usage
  • Using the .query() method will send the DISplay:WAVEView1:PLOT:PLOT<x>:VERTical:POSition? query.
  • Using the .verify(value) method will send the DISplay:WAVEView1:PLOT:PLOT<x>:VERTical:POSition? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:WAVEView1:PLOT:PLOT<x>:VERTical:POSition value command.
SCPI Syntax 
- DISplay:WAVEView1:PLOT:PLOT<x>:VERTical:POSition <NR3>
- DISplay:WAVEView1:PLOT:PLOT<x>:VERTical:POSition?
Info
  • <NR3> is the vertical position.

DisplayWaveview1PlotPlotItemVerticalScale

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:WAVEView1:PLOT:PLOT<x>:VERTical:SCAle command.

Description
  • This command sets or queries the vertical scale of the specified time trend in units per division in the specified Waveform View.
Usage
  • Using the .query() method will send the DISplay:WAVEView1:PLOT:PLOT<x>:VERTical:SCAle? query.
  • Using the .verify(value) method will send the DISplay:WAVEView1:PLOT:PLOT<x>:VERTical:SCAle? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:WAVEView1:PLOT:PLOT<x>:VERTical:SCAle value command.
SCPI Syntax 
- DISplay:WAVEView1:PLOT:PLOT<x>:VERTical:SCAle <NR3>
- DISplay:WAVEView1:PLOT:PLOT<x>:VERTical:SCAle?
Info
  • <NR3> is the vertical scale.

DisplayWaveview1Ref

Bases: SCPICmdRead

The DISplay:WAVEView1:REF command tree.

Usage
  • Using the .query() method will send the DISplay:WAVEView1:REF? query.
  • Using the .verify(value) method will send the DISplay:WAVEView1:REF? query and raise an AssertionError if the returned value does not match value.
Properties
  • .ref: The DISplay:WAVEView1:REF:REF<x> command tree.

ref property 

ref: dict[int, DisplayWaveview1RefRefItem]

Return the DISplay:WAVEView1:REF:REF<x> command tree.

Usage
  • Using the .query() method will send the DISplay:WAVEView1:REF:REF<x>? query.
  • Using the .verify(value) method will send the DISplay:WAVEView1:REF:REF<x>? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .state: The DISplay:WAVEView1:REF:REF<x>:STATE command.
  • .vertical: The DISplay:WAVEView1:REF:REF<x>:VERTical command tree.
  • .frame: The DISplay:WAVEView1:REF:REF<x>:FRAMe command.

DisplayWaveview1RefItem

Bases: ValidatedDynamicNumberCmd, SCPICmdRead

The DISplay:WAVEView1:REF<x> command tree.

Usage
  • Using the .query() method will send the DISplay:WAVEView1:REF<x>? query.
  • Using the .verify(value) method will send the DISplay:WAVEView1:REF<x>? query and raise an AssertionError if the returned value does not match value.
Properties
  • .dall: The DISplay:WAVEView1:REF<x>_DALL command tree.

dall property 

dall: DisplayWaveview1RefItemDall

Return the DISplay:WAVEView1:REF<x>_DALL command tree.

Usage
  • Using the .query() method will send the DISplay:WAVEView1:REF<x>_DALL? query.
  • Using the .verify(value) method will send the DISplay:WAVEView1:REF<x>_DALL? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .frame: The DISplay:WAVEView1:REF<x>_DALL:FRAMe command.

DisplayWaveview1RefItemDall

Bases: SCPICmdRead

The DISplay:WAVEView1:REF<x>_DALL command tree.

Usage
  • Using the .query() method will send the DISplay:WAVEView1:REF<x>_DALL? query.
  • Using the .verify(value) method will send the DISplay:WAVEView1:REF<x>_DALL? query and raise an AssertionError if the returned value does not match value.
Properties
  • .frame: The DISplay:WAVEView1:REF<x>_DALL:FRAMe command.

frame property 

frame: DisplayWaveview1RefItemDallFrame

Return the DISplay:WAVEView1:REF<x>_DALL:FRAMe command.

Description
  • This command sets or returns the selected frame of the specified digital ref. Each ref has a unique selected frame.
Usage
  • Using the .query() method will send the DISplay:WAVEView1:REF<x>_DALL:FRAMe? query.
  • Using the .verify(value) method will send the DISplay:WAVEView1:REF<x>_DALL:FRAMe? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:WAVEView1:REF<x>_DALL:FRAMe value command.
SCPI Syntax 
- DISplay:WAVEView1:REF<x>_DALL:FRAMe <NR1>
- DISplay:WAVEView1:REF<x>_DALL:FRAMe?
Info
  • <NR1> is the selected frame of the specified digital ref.

DisplayWaveview1RefItemDallFrame

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:WAVEView1:REF<x>_DALL:FRAMe command.

Description
  • This command sets or returns the selected frame of the specified digital ref. Each ref has a unique selected frame.
Usage
  • Using the .query() method will send the DISplay:WAVEView1:REF<x>_DALL:FRAMe? query.
  • Using the .verify(value) method will send the DISplay:WAVEView1:REF<x>_DALL:FRAMe? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:WAVEView1:REF<x>_DALL:FRAMe value command.
SCPI Syntax 
- DISplay:WAVEView1:REF<x>_DALL:FRAMe <NR1>
- DISplay:WAVEView1:REF<x>_DALL:FRAMe?
Info
  • <NR1> is the selected frame of the specified digital ref.

DisplayWaveview1RefRefItem

Bases: ValidatedDynamicNumberCmd, SCPICmdRead

The DISplay:WAVEView1:REF:REF<x> command tree.

Usage
  • Using the .query() method will send the DISplay:WAVEView1:REF:REF<x>? query.
  • Using the .verify(value) method will send the DISplay:WAVEView1:REF:REF<x>? query and raise an AssertionError if the returned value does not match value.
Properties
  • .state: The DISplay:WAVEView1:REF:REF<x>:STATE command.
  • .vertical: The DISplay:WAVEView1:REF:REF<x>:VERTical command tree.
  • .frame: The DISplay:WAVEView1:REF:REF<x>:FRAMe command.

frame property 

frame: DisplayWaveview1RefRefItemFrame

Return the DISplay:WAVEView1:REF:REF<x>:FRAMe command.

Description
  • This command sets or returns the selected frame of the specified analog ref. Each ref has a unique selected frame.
Usage
  • Using the .query() method will send the DISplay:WAVEView1:REF:REF<x>:FRAMe? query.
  • Using the .verify(value) method will send the DISplay:WAVEView1:REF:REF<x>:FRAMe? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:WAVEView1:REF:REF<x>:FRAMe value command.
SCPI Syntax 
- DISplay:WAVEView1:REF:REF<x>:FRAMe <NR1>
- DISplay:WAVEView1:REF:REF<x>:FRAMe?
Info
  • <NR1> is the selected frame of the specified analog ref.

state property 

state: DisplayWaveview1RefRefItemState

Return the DISplay:WAVEView1:REF:REF<x>:STATE command.

Description
  • This command sets or queries the state of the specified reference waveform in the specified Waveform View.
Usage
  • Using the .query() method will send the DISplay:WAVEView1:REF:REF<x>:STATE? query.
  • Using the .verify(value) method will send the DISplay:WAVEView1:REF:REF<x>:STATE? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:WAVEView1:REF:REF<x>:STATE value command.
SCPI Syntax 
- DISplay:WAVEView1:REF:REF<x>:STATE {ON|OFF|<NR1>}
- DISplay:WAVEView1:REF:REF<x>:STATE?
Info
  • <NR1> = 0 disables the specified reference in the specified Waveform View; any other value turns this feature on.
  • OFF disables the specified reference in the specified Waveform View.
  • ON enables the specified reference in the specified Waveform View.

vertical property 

vertical: DisplayWaveview1RefRefItemVertical

Return the DISplay:WAVEView1:REF:REF<x>:VERTical command tree.

Usage
  • Using the .query() method will send the DISplay:WAVEView1:REF:REF<x>:VERTical? query.
  • Using the .verify(value) method will send the DISplay:WAVEView1:REF:REF<x>:VERTical? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .position: The DISplay:WAVEView1:REF:REF<x>:VERTical:POSition command.
  • .scale: The DISplay:WAVEView1:REF:REF<x>:VERTical:SCAle command.

DisplayWaveview1RefRefItemFrame

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:WAVEView1:REF:REF<x>:FRAMe command.

Description
  • This command sets or returns the selected frame of the specified analog ref. Each ref has a unique selected frame.
Usage
  • Using the .query() method will send the DISplay:WAVEView1:REF:REF<x>:FRAMe? query.
  • Using the .verify(value) method will send the DISplay:WAVEView1:REF:REF<x>:FRAMe? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:WAVEView1:REF:REF<x>:FRAMe value command.
SCPI Syntax 
- DISplay:WAVEView1:REF:REF<x>:FRAMe <NR1>
- DISplay:WAVEView1:REF:REF<x>:FRAMe?
Info
  • <NR1> is the selected frame of the specified analog ref.

DisplayWaveview1RefRefItemState

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:WAVEView1:REF:REF<x>:STATE command.

Description
  • This command sets or queries the state of the specified reference waveform in the specified Waveform View.
Usage
  • Using the .query() method will send the DISplay:WAVEView1:REF:REF<x>:STATE? query.
  • Using the .verify(value) method will send the DISplay:WAVEView1:REF:REF<x>:STATE? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:WAVEView1:REF:REF<x>:STATE value command.
SCPI Syntax 
- DISplay:WAVEView1:REF:REF<x>:STATE {ON|OFF|<NR1>}
- DISplay:WAVEView1:REF:REF<x>:STATE?
Info
  • <NR1> = 0 disables the specified reference in the specified Waveform View; any other value turns this feature on.
  • OFF disables the specified reference in the specified Waveform View.
  • ON enables the specified reference in the specified Waveform View.

DisplayWaveview1RefRefItemVertical

Bases: SCPICmdRead

The DISplay:WAVEView1:REF:REF<x>:VERTical command tree.

Usage
  • Using the .query() method will send the DISplay:WAVEView1:REF:REF<x>:VERTical? query.
  • Using the .verify(value) method will send the DISplay:WAVEView1:REF:REF<x>:VERTical? query and raise an AssertionError if the returned value does not match value.
Properties
  • .position: The DISplay:WAVEView1:REF:REF<x>:VERTical:POSition command.
  • .scale: The DISplay:WAVEView1:REF:REF<x>:VERTical:SCAle command.

position property 

position: DisplayWaveview1RefRefItemVerticalPosition

Return the DISplay:WAVEView1:REF:REF<x>:VERTical:POSition command.

Description
  • This command sets or queries the vertical position in divisions of the specified reference in the specified Waveform View.
Usage
  • Using the .query() method will send the DISplay:WAVEView1:REF:REF<x>:VERTical:POSition? query.
  • Using the .verify(value) method will send the DISplay:WAVEView1:REF:REF<x>:VERTical:POSition? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:WAVEView1:REF:REF<x>:VERTical:POSition value command.
SCPI Syntax 
- DISplay:WAVEView1:REF:REF<x>:VERTical:POSition <NR3>
- DISplay:WAVEView1:REF:REF<x>:VERTical:POSition?
Info
  • <NR3> is the vertical position in divisions.

scale property 

scale: DisplayWaveview1RefRefItemVerticalScale

Return the DISplay:WAVEView1:REF:REF<x>:VERTical:SCAle command.

Description
  • This command sets or queries the vertical scale of the specified reference in volts per div within the specified Waveform View.
Usage
  • Using the .query() method will send the DISplay:WAVEView1:REF:REF<x>:VERTical:SCAle? query.
  • Using the .verify(value) method will send the DISplay:WAVEView1:REF:REF<x>:VERTical:SCAle? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:WAVEView1:REF:REF<x>:VERTical:SCAle value command.
SCPI Syntax 
- DISplay:WAVEView1:REF:REF<x>:VERTical:SCAle <NR3>
- DISplay:WAVEView1:REF:REF<x>:VERTical:SCAle?
Info
  • <NR3> is the vertical scale of the specified reference waveform.

DisplayWaveview1RefRefItemVerticalPosition

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:WAVEView1:REF:REF<x>:VERTical:POSition command.

Description
  • This command sets or queries the vertical position in divisions of the specified reference in the specified Waveform View.
Usage
  • Using the .query() method will send the DISplay:WAVEView1:REF:REF<x>:VERTical:POSition? query.
  • Using the .verify(value) method will send the DISplay:WAVEView1:REF:REF<x>:VERTical:POSition? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:WAVEView1:REF:REF<x>:VERTical:POSition value command.
SCPI Syntax 
- DISplay:WAVEView1:REF:REF<x>:VERTical:POSition <NR3>
- DISplay:WAVEView1:REF:REF<x>:VERTical:POSition?
Info
  • <NR3> is the vertical position in divisions.

DisplayWaveview1RefRefItemVerticalScale

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:WAVEView1:REF:REF<x>:VERTical:SCAle command.

Description
  • This command sets or queries the vertical scale of the specified reference in volts per div within the specified Waveform View.
Usage
  • Using the .query() method will send the DISplay:WAVEView1:REF:REF<x>:VERTical:SCAle? query.
  • Using the .verify(value) method will send the DISplay:WAVEView1:REF:REF<x>:VERTical:SCAle? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:WAVEView1:REF:REF<x>:VERTical:SCAle value command.
SCPI Syntax 
- DISplay:WAVEView1:REF:REF<x>:VERTical:SCAle <NR3>
- DISplay:WAVEView1:REF:REF<x>:VERTical:SCAle?
Info
  • <NR3> is the vertical scale of the specified reference waveform.

DisplayWaveview1RfFrequencyItem

Bases: ValidatedDynamicNumberCmd, SCPICmdRead

The DISplay:WAVEView1:RF_FREQuency<x> command tree.

Usage
  • Using the .query() method will send the DISplay:WAVEView1:RF_FREQuency<x>? query.
  • Using the .verify(value) method will send the DISplay:WAVEView1:RF_FREQuency<x>? query and raise an AssertionError if the returned value does not match value.
Info
  • RF_FREQuency<x> specifies the number of the Frequency vs. Time waveform.
Properties
  • .vertical: The DISplay:WAVEView1:RF_FREQuency<x>:VERTical command tree.

vertical property 

vertical: DisplayWaveview1RfFrequencyItemVertical

Return the DISplay:WAVEView1:RF_FREQuency<x>:VERTical command tree.

Usage
  • Using the .query() method will send the DISplay:WAVEView1:RF_FREQuency<x>:VERTical? query.
  • Using the .verify(value) method will send the DISplay:WAVEView1:RF_FREQuency<x>:VERTical? query and raise an AssertionError if the returned value does not match value.
Info
  • RF_FREQuency<x> specifies the number of the Frequency vs. Time waveform.
Sub-properties
  • .position: The DISplay:WAVEView1:RF_FREQuency<x>:VERTical:POSition command.
  • .scale: The DISplay:WAVEView1:RF_FREQuency<x>:VERTical:SCAle command.

DisplayWaveview1RfFrequencyItemVertical

Bases: SCPICmdRead

The DISplay:WAVEView1:RF_FREQuency<x>:VERTical command tree.

Usage
  • Using the .query() method will send the DISplay:WAVEView1:RF_FREQuency<x>:VERTical? query.
  • Using the .verify(value) method will send the DISplay:WAVEView1:RF_FREQuency<x>:VERTical? query and raise an AssertionError if the returned value does not match value.
Info
  • RF_FREQuency<x> specifies the number of the Frequency vs. Time waveform.
Properties
  • .position: The DISplay:WAVEView1:RF_FREQuency<x>:VERTical:POSition command.
  • .scale: The DISplay:WAVEView1:RF_FREQuency<x>:VERTical:SCAle command.

position property 

position: DisplayWaveview1RfFrequencyItemVerticalPosition

Return the DISplay:WAVEView1:RF_FREQuency<x>:VERTical:POSition command.

Description
  • This command sets or queries the vertical position of the specified Frequency vs. Time trace in the Waveform View, in divisions.
Usage
  • Using the .query() method will send the DISplay:WAVEView1:RF_FREQuency<x>:VERTical:POSition? query.
  • Using the .verify(value) method will send the DISplay:WAVEView1:RF_FREQuency<x>:VERTical:POSition? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:WAVEView1:RF_FREQuency<x>:VERTical:POSition value command.
SCPI Syntax 
- DISplay:WAVEView1:RF_FREQuency<x>:VERTical:POSition <NR3>
- DISplay:WAVEView1:RF_FREQuency<x>:VERTical:POSition?
Info
  • 1 is always WAVEView1.
  • RF_FREQuency<x> specifies the number of the Frequency vs. Time waveform.
  • NR3 sets the vertical position in divisions. 0.0 divisions is center, 5.0 is the top of the Waveform View, and -5.0 is the top of the Waveform View.

scale property 

scale: DisplayWaveview1RfFrequencyItemVerticalScale

Return the DISplay:WAVEView1:RF_FREQuency<x>:VERTical:SCAle command.

Description
  • This command sets or queries the vertical scale of the specified Frequency vs. Time trace in the Waveform View, in divisions.
Usage
  • Using the .query() method will send the DISplay:WAVEView1:RF_FREQuency<x>:VERTical:SCAle? query.
  • Using the .verify(value) method will send the DISplay:WAVEView1:RF_FREQuency<x>:VERTical:SCAle? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:WAVEView1:RF_FREQuency<x>:VERTical:SCAle value command.
SCPI Syntax 
- DISplay:WAVEView1:RF_FREQuency<x>:VERTical:SCAle <NR3>
- DISplay:WAVEView1:RF_FREQuency<x>:VERTical:SCAle?
Info
  • 1 is always WAVEView1.
  • RF_FREQuency<x> specifies the number of the Frequency vs. Time waveform.
  • NR3 sets the vertical scale, in Hertz per division.

DisplayWaveview1RfFrequencyItemVerticalPosition

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:WAVEView1:RF_FREQuency<x>:VERTical:POSition command.

Description
  • This command sets or queries the vertical position of the specified Frequency vs. Time trace in the Waveform View, in divisions.
Usage
  • Using the .query() method will send the DISplay:WAVEView1:RF_FREQuency<x>:VERTical:POSition? query.
  • Using the .verify(value) method will send the DISplay:WAVEView1:RF_FREQuency<x>:VERTical:POSition? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:WAVEView1:RF_FREQuency<x>:VERTical:POSition value command.
SCPI Syntax 
- DISplay:WAVEView1:RF_FREQuency<x>:VERTical:POSition <NR3>
- DISplay:WAVEView1:RF_FREQuency<x>:VERTical:POSition?
Info
  • 1 is always WAVEView1.
  • RF_FREQuency<x> specifies the number of the Frequency vs. Time waveform.
  • NR3 sets the vertical position in divisions. 0.0 divisions is center, 5.0 is the top of the Waveform View, and -5.0 is the top of the Waveform View.

DisplayWaveview1RfFrequencyItemVerticalScale

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:WAVEView1:RF_FREQuency<x>:VERTical:SCAle command.

Description
  • This command sets or queries the vertical scale of the specified Frequency vs. Time trace in the Waveform View, in divisions.
Usage
  • Using the .query() method will send the DISplay:WAVEView1:RF_FREQuency<x>:VERTical:SCAle? query.
  • Using the .verify(value) method will send the DISplay:WAVEView1:RF_FREQuency<x>:VERTical:SCAle? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:WAVEView1:RF_FREQuency<x>:VERTical:SCAle value command.
SCPI Syntax 
- DISplay:WAVEView1:RF_FREQuency<x>:VERTical:SCAle <NR3>
- DISplay:WAVEView1:RF_FREQuency<x>:VERTical:SCAle?
Info
  • 1 is always WAVEView1.
  • RF_FREQuency<x> specifies the number of the Frequency vs. Time waveform.
  • NR3 sets the vertical scale, in Hertz per division.

DisplayWaveview1RfMagnitudeItem

Bases: ValidatedDynamicNumberCmd, SCPICmdRead

The DISplay:WAVEView1:RF_MAGnitude<x> command tree.

Usage
  • Using the .query() method will send the DISplay:WAVEView1:RF_MAGnitude<x>? query.
  • Using the .verify(value) method will send the DISplay:WAVEView1:RF_MAGnitude<x>? query and raise an AssertionError if the returned value does not match value.
Info
  • RF_MAGnitude<x> specifies the number of the Magnitude vs. Time Frequency waveform.
Properties
  • .vertical: The DISplay:WAVEView1:RF_MAGnitude<x>:VERTical command tree.

vertical property 

vertical: DisplayWaveview1RfMagnitudeItemVertical

Return the DISplay:WAVEView1:RF_MAGnitude<x>:VERTical command tree.

Usage
  • Using the .query() method will send the DISplay:WAVEView1:RF_MAGnitude<x>:VERTical? query.
  • Using the .verify(value) method will send the DISplay:WAVEView1:RF_MAGnitude<x>:VERTical? query and raise an AssertionError if the returned value does not match value.
Info
  • RF_MAGnitude<x> specifies the number of the Magnitude vs. Time Frequency waveform.
Sub-properties
  • .position: The DISplay:WAVEView1:RF_MAGnitude<x>:VERTical:POSition command.
  • .scale: The DISplay:WAVEView1:RF_MAGnitude<x>:VERTical:SCAle command.

DisplayWaveview1RfMagnitudeItemVertical

Bases: SCPICmdRead

The DISplay:WAVEView1:RF_MAGnitude<x>:VERTical command tree.

Usage
  • Using the .query() method will send the DISplay:WAVEView1:RF_MAGnitude<x>:VERTical? query.
  • Using the .verify(value) method will send the DISplay:WAVEView1:RF_MAGnitude<x>:VERTical? query and raise an AssertionError if the returned value does not match value.
Info
  • RF_MAGnitude<x> specifies the number of the Magnitude vs. Time Frequency waveform.
Properties
  • .position: The DISplay:WAVEView1:RF_MAGnitude<x>:VERTical:POSition command.
  • .scale: The DISplay:WAVEView1:RF_MAGnitude<x>:VERTical:SCAle command.

position property 

position: DisplayWaveview1RfMagnitudeItemVerticalPosition

Return the DISplay:WAVEView1:RF_MAGnitude<x>:VERTical:POSition command.

Description
  • This command sets or queries the vertical position of the specified Magnitude vs. Time trace in the Waveform View, in divisions.
Usage
  • Using the .query() method will send the DISplay:WAVEView1:RF_MAGnitude<x>:VERTical:POSition? query.
  • Using the .verify(value) method will send the DISplay:WAVEView1:RF_MAGnitude<x>:VERTical:POSition? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:WAVEView1:RF_MAGnitude<x>:VERTical:POSition value command.
SCPI Syntax 
- DISplay:WAVEView1:RF_MAGnitude<x>:VERTical:POSition <NR3>
- DISplay:WAVEView1:RF_MAGnitude<x>:VERTical:POSition?
Info
  • 1 is always WAVEView1.
  • RF_MAGnitude<x> specifies the number of the Magnitude vs. Time Frequency waveform.
  • NR3 sets the vertical position in divisions. 0.0 divisions is center, 5.0 is the top of the Waveform View, and -5.0 is the top of the Waveform View.

scale property 

scale: DisplayWaveview1RfMagnitudeItemVerticalScale

Return the DISplay:WAVEView1:RF_MAGnitude<x>:VERTical:SCAle command.

Description
  • This command sets or queries the vertical scale of the specified Magnitude vs. Time trace in the specified Waveform View in Volts, Watts, or dB per division.
Usage
  • Using the .query() method will send the DISplay:WAVEView1:RF_MAGnitude<x>:VERTical:SCAle? query.
  • Using the .verify(value) method will send the DISplay:WAVEView1:RF_MAGnitude<x>:VERTical:SCAle? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:WAVEView1:RF_MAGnitude<x>:VERTical:SCAle value command.
SCPI Syntax 
- DISplay:WAVEView1:RF_MAGnitude<x>:VERTical:SCAle <NR3>
- DISplay:WAVEView1:RF_MAGnitude<x>:VERTical:SCAle?
Info
  • 1 is always WAVEView1.
  • RF_MAGnitude<x> specifies the number of the Magnitude vs. Time Frequency waveform.
  • NR3 sets the vertical scale. The units for the vertical scale depend on the Magnitude Format setting. If the format is ‘Amplitude (linear)’, then the units are Volts/div. If the format is ‘Power (linear)’, then the units are Watts/div. If the format is ‘Power (log)’, then the units are dB/div.

DisplayWaveview1RfMagnitudeItemVerticalPosition

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:WAVEView1:RF_MAGnitude<x>:VERTical:POSition command.

Description
  • This command sets or queries the vertical position of the specified Magnitude vs. Time trace in the Waveform View, in divisions.
Usage
  • Using the .query() method will send the DISplay:WAVEView1:RF_MAGnitude<x>:VERTical:POSition? query.
  • Using the .verify(value) method will send the DISplay:WAVEView1:RF_MAGnitude<x>:VERTical:POSition? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:WAVEView1:RF_MAGnitude<x>:VERTical:POSition value command.
SCPI Syntax 
- DISplay:WAVEView1:RF_MAGnitude<x>:VERTical:POSition <NR3>
- DISplay:WAVEView1:RF_MAGnitude<x>:VERTical:POSition?
Info
  • 1 is always WAVEView1.
  • RF_MAGnitude<x> specifies the number of the Magnitude vs. Time Frequency waveform.
  • NR3 sets the vertical position in divisions. 0.0 divisions is center, 5.0 is the top of the Waveform View, and -5.0 is the top of the Waveform View.

DisplayWaveview1RfMagnitudeItemVerticalScale

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:WAVEView1:RF_MAGnitude<x>:VERTical:SCAle command.

Description
  • This command sets or queries the vertical scale of the specified Magnitude vs. Time trace in the specified Waveform View in Volts, Watts, or dB per division.
Usage
  • Using the .query() method will send the DISplay:WAVEView1:RF_MAGnitude<x>:VERTical:SCAle? query.
  • Using the .verify(value) method will send the DISplay:WAVEView1:RF_MAGnitude<x>:VERTical:SCAle? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:WAVEView1:RF_MAGnitude<x>:VERTical:SCAle value command.
SCPI Syntax 
- DISplay:WAVEView1:RF_MAGnitude<x>:VERTical:SCAle <NR3>
- DISplay:WAVEView1:RF_MAGnitude<x>:VERTical:SCAle?
Info
  • 1 is always WAVEView1.
  • RF_MAGnitude<x> specifies the number of the Magnitude vs. Time Frequency waveform.
  • NR3 sets the vertical scale. The units for the vertical scale depend on the Magnitude Format setting. If the format is ‘Amplitude (linear)’, then the units are Volts/div. If the format is ‘Power (linear)’, then the units are Watts/div. If the format is ‘Power (log)’, then the units are dB/div.

DisplayWaveview1RfPhaseItem

Bases: ValidatedDynamicNumberCmd, SCPICmdRead

The DISplay:WAVEView1:RF_PHASe<x> command tree.

Usage
  • Using the .query() method will send the DISplay:WAVEView1:RF_PHASe<x>? query.
  • Using the .verify(value) method will send the DISplay:WAVEView1:RF_PHASe<x>? query and raise an AssertionError if the returned value does not match value.
Info
  • RF_PHASe<x> specifies the number of the Phase vs. Time Frequency waveform.
Properties
  • .vertical: The DISplay:WAVEView1:RF_PHASe<x>:VERTical command tree.

vertical property 

vertical: DisplayWaveview1RfPhaseItemVertical

Return the DISplay:WAVEView1:RF_PHASe<x>:VERTical command tree.

Usage
  • Using the .query() method will send the DISplay:WAVEView1:RF_PHASe<x>:VERTical? query.
  • Using the .verify(value) method will send the DISplay:WAVEView1:RF_PHASe<x>:VERTical? query and raise an AssertionError if the returned value does not match value.
Info
  • RF_PHASe<x> specifies the number of the Phase vs. Time Frequency waveform.
Sub-properties
  • .position: The DISplay:WAVEView1:RF_PHASe<x>:VERTical:POSition command.
  • .scale: The DISplay:WAVEView1:RF_PHASe<x>:VERTical:SCAle command.

DisplayWaveview1RfPhaseItemVertical

Bases: SCPICmdRead

The DISplay:WAVEView1:RF_PHASe<x>:VERTical command tree.

Usage
  • Using the .query() method will send the DISplay:WAVEView1:RF_PHASe<x>:VERTical? query.
  • Using the .verify(value) method will send the DISplay:WAVEView1:RF_PHASe<x>:VERTical? query and raise an AssertionError if the returned value does not match value.
Info
  • RF_PHASe<x> specifies the number of the Phase vs. Time Frequency waveform.
Properties
  • .position: The DISplay:WAVEView1:RF_PHASe<x>:VERTical:POSition command.
  • .scale: The DISplay:WAVEView1:RF_PHASe<x>:VERTical:SCAle command.

position property 

position: DisplayWaveview1RfPhaseItemVerticalPosition

Return the DISplay:WAVEView1:RF_PHASe<x>:VERTical:POSition command.

Description
  • This command sets or queries the vertical position of the specified Phase vs. Time trace in the Waveform View, in divisions.
Usage
  • Using the .query() method will send the DISplay:WAVEView1:RF_PHASe<x>:VERTical:POSition? query.
  • Using the .verify(value) method will send the DISplay:WAVEView1:RF_PHASe<x>:VERTical:POSition? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:WAVEView1:RF_PHASe<x>:VERTical:POSition value command.
SCPI Syntax 
- DISplay:WAVEView1:RF_PHASe<x>:VERTical:POSition <NR3>
- DISplay:WAVEView1:RF_PHASe<x>:VERTical:POSition?
Info
  • 1 is always WAVEView1.
  • RF_PHASe<x> specifies the number of the Phase vs. Time Frequency waveform.
  • NR3 sets the vertical position in divisions. 0.0 divisions is center, 5.0 is the top of the Waveform View, and -5.0 is the top of the Waveform View.

scale property 

scale: DisplayWaveview1RfPhaseItemVerticalScale

Return the DISplay:WAVEView1:RF_PHASe<x>:VERTical:SCAle command.

Description
  • This command sets or queries the vertical scale of the specified Phase vs. Time trace in the specified Waveform View in degrees per division.
Usage
  • Using the .query() method will send the DISplay:WAVEView1:RF_PHASe<x>:VERTical:SCAle? query.
  • Using the .verify(value) method will send the DISplay:WAVEView1:RF_PHASe<x>:VERTical:SCAle? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:WAVEView1:RF_PHASe<x>:VERTical:SCAle value command.
SCPI Syntax 
- DISplay:WAVEView1:RF_PHASe<x>:VERTical:SCAle <NR3>
- DISplay:WAVEView1:RF_PHASe<x>:VERTical:SCAle?
Info
  • 1 is always WAVEView1.
  • RF_PHASe<x> specifies the number of the Phase vs. Time Frequency waveform.
  • <NR3> sets the vertical scale, in degrees per division.

DisplayWaveview1RfPhaseItemVerticalPosition

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:WAVEView1:RF_PHASe<x>:VERTical:POSition command.

Description
  • This command sets or queries the vertical position of the specified Phase vs. Time trace in the Waveform View, in divisions.
Usage
  • Using the .query() method will send the DISplay:WAVEView1:RF_PHASe<x>:VERTical:POSition? query.
  • Using the .verify(value) method will send the DISplay:WAVEView1:RF_PHASe<x>:VERTical:POSition? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:WAVEView1:RF_PHASe<x>:VERTical:POSition value command.
SCPI Syntax 
- DISplay:WAVEView1:RF_PHASe<x>:VERTical:POSition <NR3>
- DISplay:WAVEView1:RF_PHASe<x>:VERTical:POSition?
Info
  • 1 is always WAVEView1.
  • RF_PHASe<x> specifies the number of the Phase vs. Time Frequency waveform.
  • NR3 sets the vertical position in divisions. 0.0 divisions is center, 5.0 is the top of the Waveform View, and -5.0 is the top of the Waveform View.

DisplayWaveview1RfPhaseItemVerticalScale

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:WAVEView1:RF_PHASe<x>:VERTical:SCAle command.

Description
  • This command sets or queries the vertical scale of the specified Phase vs. Time trace in the specified Waveform View in degrees per division.
Usage
  • Using the .query() method will send the DISplay:WAVEView1:RF_PHASe<x>:VERTical:SCAle? query.
  • Using the .verify(value) method will send the DISplay:WAVEView1:RF_PHASe<x>:VERTical:SCAle? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:WAVEView1:RF_PHASe<x>:VERTical:SCAle value command.
SCPI Syntax 
- DISplay:WAVEView1:RF_PHASe<x>:VERTical:SCAle <NR3>
- DISplay:WAVEView1:RF_PHASe<x>:VERTical:SCAle?
Info
  • 1 is always WAVEView1.
  • RF_PHASe<x> specifies the number of the Phase vs. Time Frequency waveform.
  • <NR3> sets the vertical scale, in degrees per division.

DisplayWaveview1Style

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:WAVEView1:STYle command.

Description
  • This command sets or queries how the waveforms are displayed for analysis mode.
Usage
  • Using the .query() method will send the DISplay:WAVEView1:STYle? query.
  • Using the .verify(value) method will send the DISplay:WAVEView1:STYle? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:WAVEView1:STYle value command.
SCPI Syntax 
- DISplay:WAVEView1:STYle {VECtors|DOTsonly}
- DISplay:WAVEView1:STYle?
Info
  • DOTs displays individual data points. New points immediately replace old ones.
  • VECtors connects adjacent data points. New points immediately replace old ones.

DisplayWaveview1Viewstyle

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:WAVEView1:VIEWStyle command.

Description
  • The command sets or queries the waveform layout style used by the display.
Usage
  • Using the .query() method will send the DISplay:WAVEView1:VIEWStyle? query.
  • Using the .verify(value) method will send the DISplay:WAVEView1:VIEWStyle? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:WAVEView1:VIEWStyle value command.
SCPI Syntax 
- DISplay:WAVEView1:VIEWStyle {OVErlay|STAcked}
- DISplay:WAVEView1:VIEWStyle?
Info
  • OVErlay specifies that the display view style used by the specified Waveform View is overlay.
  • STAcked specifies that the display view style used by the specified Waveform View is stacked.

DisplayWaveview1Zoom

Bases: SCPICmdRead

The DISplay:WAVEView1:ZOOM command.

Description
  • This query returns the zoom parameters of the specified Waveform View.
Usage
  • Using the .query() method will send the DISplay:WAVEView1:ZOOM? query.
  • Using the .verify(value) method will send the DISplay:WAVEView1:ZOOM? query and raise an AssertionError if the returned value does not match value.
SCPI Syntax 
- DISplay:WAVEView1:ZOOM?
Properties
  • .zoom1: The DISplay:WAVEView1:ZOOM:ZOOM1 command.

zoom1 property 

zoom1: DisplayWaveview1ZoomZoom1

Return the DISplay:WAVEView1:ZOOM:ZOOM1 command.

Description
  • This query returns the zoom parameters of the specified zoom in the specified Waveform View. must be 1.
Usage
  • Using the .query() method will send the DISplay:WAVEView1:ZOOM:ZOOM1? query.
  • Using the .verify(value) method will send the DISplay:WAVEView1:ZOOM:ZOOM1? query and raise an AssertionError if the returned value does not match value.
SCPI Syntax 
- DISplay:WAVEView1:ZOOM:ZOOM1?
Sub-properties
  • .horizontal: The DISplay:WAVEView1:ZOOM:ZOOM1:HORizontal command tree.
  • .state: The DISplay:WAVEView1:ZOOM:ZOOM1:STATe command.
  • .vertical: The DISplay:WAVEView1:ZOOM:ZOOM1:VERTical command tree.

DisplayWaveview1ZoomZoom1

Bases: SCPICmdRead

The DISplay:WAVEView1:ZOOM:ZOOM1 command.

Description
  • This query returns the zoom parameters of the specified zoom in the specified Waveform View. must be 1.
Usage
  • Using the .query() method will send the DISplay:WAVEView1:ZOOM:ZOOM1? query.
  • Using the .verify(value) method will send the DISplay:WAVEView1:ZOOM:ZOOM1? query and raise an AssertionError if the returned value does not match value.
SCPI Syntax 
- DISplay:WAVEView1:ZOOM:ZOOM1?
Properties
  • .horizontal: The DISplay:WAVEView1:ZOOM:ZOOM1:HORizontal command tree.
  • .state: The DISplay:WAVEView1:ZOOM:ZOOM1:STATe command.
  • .vertical: The DISplay:WAVEView1:ZOOM:ZOOM1:VERTical command tree.

horizontal property 

horizontal: DisplayWaveview1ZoomZoom1Horizontal

Return the DISplay:WAVEView1:ZOOM:ZOOM1:HORizontal command tree.

Usage
  • Using the .query() method will send the DISplay:WAVEView1:ZOOM:ZOOM1:HORizontal? query.
  • Using the .verify(value) method will send the DISplay:WAVEView1:ZOOM:ZOOM1:HORizontal? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .position: The DISplay:WAVEView1:ZOOM:ZOOM1:HORizontal:POSition command.
  • .scale: The DISplay:WAVEView1:ZOOM:ZOOM1:HORizontal:SCALe command.
  • .winscale: The DISplay:WAVEView1:ZOOM:ZOOM1:HORizontal:WINSCALe command.

state property 

state: DisplayWaveview1ZoomZoom1State

Return the DISplay:WAVEView1:ZOOM:ZOOM1:STATe command.

Description
  • This command sets or queries the zoom display state of the specified zoom in the specified Waveform View. This command is equivalent to pushing the zoom button on the front panel.
Usage
  • Using the .query() method will send the DISplay:WAVEView1:ZOOM:ZOOM1:STATe? query.
  • Using the .verify(value) method will send the DISplay:WAVEView1:ZOOM:ZOOM1:STATe? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:WAVEView1:ZOOM:ZOOM1:STATe value command.
SCPI Syntax 
- DISplay:WAVEView1:ZOOM:ZOOM1:STATe {ON|OFF|<NR1>}
- DISplay:WAVEView1:ZOOM:ZOOM1:STATe?
Info
  • ON turns the specified zoom on.
  • OFF turns specified zoom off.
  • <NR1> = 0 disables the specified zoom; any other value enables the specified zoom.

vertical property 

vertical: DisplayWaveview1ZoomZoom1Vertical

Return the DISplay:WAVEView1:ZOOM:ZOOM1:VERTical command tree.

Usage
  • Using the .query() method will send the DISplay:WAVEView1:ZOOM:ZOOM1:VERTical? query.
  • Using the .verify(value) method will send the DISplay:WAVEView1:ZOOM:ZOOM1:VERTical? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .position: The DISplay:WAVEView1:ZOOM:ZOOM1:VERTical:POSition command.
  • .scale: The DISplay:WAVEView1:ZOOM:ZOOM1:VERTical:SCALe command.

DisplayWaveview1ZoomZoom1Horizontal

Bases: SCPICmdRead

The DISplay:WAVEView1:ZOOM:ZOOM1:HORizontal command tree.

Usage
  • Using the .query() method will send the DISplay:WAVEView1:ZOOM:ZOOM1:HORizontal? query.
  • Using the .verify(value) method will send the DISplay:WAVEView1:ZOOM:ZOOM1:HORizontal? query and raise an AssertionError if the returned value does not match value.
Properties
  • .position: The DISplay:WAVEView1:ZOOM:ZOOM1:HORizontal:POSition command.
  • .scale: The DISplay:WAVEView1:ZOOM:ZOOM1:HORizontal:SCALe command.
  • .winscale: The DISplay:WAVEView1:ZOOM:ZOOM1:HORizontal:WINSCALe command.

position property 

position: DisplayWaveview1ZoomZoom1HorizontalPosition

Return the DISplay:WAVEView1:ZOOM:ZOOM1:HORizontal:POSition command.

Description
  • Sets or queries the horizontal zoom position (of the specified zoom in the specified Waveform View) of the zoomed waveform or zoom waveform in the display, around which the zoom waveform displays. It is freely movable around the acquisition settings (horizontal span). An acquired waveform or reference could extend off screen. The valid zoom area does not care about the waveform itself, only the user setting for acquisition. For example, if horizontal scale is set to 1 second, position to 50, then the acquisition area will go from -5 s to +5 s. Zoom window 0 will focus on -5 s and zoom area 100 will focus on +5 s. If the instrument is stopped and the scale changed to 0.5 s, there will be data off the ends of the display. However, 0% zoom will put the user focus on -2.5 s, the lower bound of the acquisition span.
Usage
  • Using the .query() method will send the DISplay:WAVEView1:ZOOM:ZOOM1:HORizontal:POSition? query.
  • Using the .verify(value) method will send the DISplay:WAVEView1:ZOOM:ZOOM1:HORizontal:POSition? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:WAVEView1:ZOOM:ZOOM1:HORizontal:POSition value command.
SCPI Syntax 
- DISplay:WAVEView1:ZOOM:ZOOM1:HORizontal:POSition <NR3>
- DISplay:WAVEView1:ZOOM:ZOOM1:HORizontal:POSition?
Info
  • <NR3> is a value from 0 to 100.00 and is the percent of the waveform that is to the left of screen center, when the zoom factor is 2× or greater.

scale property 

scale: DisplayWaveview1ZoomZoom1HorizontalScale

Return the DISplay:WAVEView1:ZOOM:ZOOM1:HORizontal:SCALe command.

Description
  • This command sets or queries the horizontal zoom factor of the specified zoom in the specified Waveform View.
Usage
  • Using the .query() method will send the DISplay:WAVEView1:ZOOM:ZOOM1:HORizontal:SCALe? query.
  • Using the .verify(value) method will send the DISplay:WAVEView1:ZOOM:ZOOM1:HORizontal:SCALe? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:WAVEView1:ZOOM:ZOOM1:HORizontal:SCALe value command.
SCPI Syntax 
- DISplay:WAVEView1:ZOOM:ZOOM1:HORizontal:SCALe <NR3>
- DISplay:WAVEView1:ZOOM:ZOOM1:HORizontal:SCALe?
Info
  • <NR3> is the amount of expansion in the horizontal direction in 1-2-4 increments of the specified zoom in the specified Waveform View.

winscale property 

winscale: DisplayWaveview1ZoomZoom1HorizontalWinscale

Return the DISplay:WAVEView1:ZOOM:ZOOM1:HORizontal:WINSCALe command.

Description
  • This command sets or queries the overview window horizontal scale in the specified Waveform View.
Usage
  • Using the .query() method will send the DISplay:WAVEView1:ZOOM:ZOOM1:HORizontal:WINSCALe? query.
  • Using the .verify(value) method will send the DISplay:WAVEView1:ZOOM:ZOOM1:HORizontal:WINSCALe? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:WAVEView1:ZOOM:ZOOM1:HORizontal:WINSCALe value command.
SCPI Syntax 
- DISplay:WAVEView1:ZOOM:ZOOM1:HORizontal:WINSCALe <NR3>
- DISplay:WAVEView1:ZOOM:ZOOM1:HORizontal:WINSCALe?
Info
  • <NR3> is the horizontal scale of the zoom window.

DisplayWaveview1ZoomZoom1HorizontalPosition

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:WAVEView1:ZOOM:ZOOM1:HORizontal:POSition command.

Description
  • Sets or queries the horizontal zoom position (of the specified zoom in the specified Waveform View) of the zoomed waveform or zoom waveform in the display, around which the zoom waveform displays. It is freely movable around the acquisition settings (horizontal span). An acquired waveform or reference could extend off screen. The valid zoom area does not care about the waveform itself, only the user setting for acquisition. For example, if horizontal scale is set to 1 second, position to 50, then the acquisition area will go from -5 s to +5 s. Zoom window 0 will focus on -5 s and zoom area 100 will focus on +5 s. If the instrument is stopped and the scale changed to 0.5 s, there will be data off the ends of the display. However, 0% zoom will put the user focus on -2.5 s, the lower bound of the acquisition span.
Usage
  • Using the .query() method will send the DISplay:WAVEView1:ZOOM:ZOOM1:HORizontal:POSition? query.
  • Using the .verify(value) method will send the DISplay:WAVEView1:ZOOM:ZOOM1:HORizontal:POSition? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:WAVEView1:ZOOM:ZOOM1:HORizontal:POSition value command.
SCPI Syntax 
- DISplay:WAVEView1:ZOOM:ZOOM1:HORizontal:POSition <NR3>
- DISplay:WAVEView1:ZOOM:ZOOM1:HORizontal:POSition?
Info
  • <NR3> is a value from 0 to 100.00 and is the percent of the waveform that is to the left of screen center, when the zoom factor is 2× or greater.

DisplayWaveview1ZoomZoom1HorizontalScale

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:WAVEView1:ZOOM:ZOOM1:HORizontal:SCALe command.

Description
  • This command sets or queries the horizontal zoom factor of the specified zoom in the specified Waveform View.
Usage
  • Using the .query() method will send the DISplay:WAVEView1:ZOOM:ZOOM1:HORizontal:SCALe? query.
  • Using the .verify(value) method will send the DISplay:WAVEView1:ZOOM:ZOOM1:HORizontal:SCALe? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:WAVEView1:ZOOM:ZOOM1:HORizontal:SCALe value command.
SCPI Syntax 
- DISplay:WAVEView1:ZOOM:ZOOM1:HORizontal:SCALe <NR3>
- DISplay:WAVEView1:ZOOM:ZOOM1:HORizontal:SCALe?
Info
  • <NR3> is the amount of expansion in the horizontal direction in 1-2-4 increments of the specified zoom in the specified Waveform View.

DisplayWaveview1ZoomZoom1HorizontalWinscale

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:WAVEView1:ZOOM:ZOOM1:HORizontal:WINSCALe command.

Description
  • This command sets or queries the overview window horizontal scale in the specified Waveform View.
Usage
  • Using the .query() method will send the DISplay:WAVEView1:ZOOM:ZOOM1:HORizontal:WINSCALe? query.
  • Using the .verify(value) method will send the DISplay:WAVEView1:ZOOM:ZOOM1:HORizontal:WINSCALe? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:WAVEView1:ZOOM:ZOOM1:HORizontal:WINSCALe value command.
SCPI Syntax 
- DISplay:WAVEView1:ZOOM:ZOOM1:HORizontal:WINSCALe <NR3>
- DISplay:WAVEView1:ZOOM:ZOOM1:HORizontal:WINSCALe?
Info
  • <NR3> is the horizontal scale of the zoom window.

DisplayWaveview1ZoomZoom1State

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:WAVEView1:ZOOM:ZOOM1:STATe command.

Description
  • This command sets or queries the zoom display state of the specified zoom in the specified Waveform View. This command is equivalent to pushing the zoom button on the front panel.
Usage
  • Using the .query() method will send the DISplay:WAVEView1:ZOOM:ZOOM1:STATe? query.
  • Using the .verify(value) method will send the DISplay:WAVEView1:ZOOM:ZOOM1:STATe? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:WAVEView1:ZOOM:ZOOM1:STATe value command.
SCPI Syntax 
- DISplay:WAVEView1:ZOOM:ZOOM1:STATe {ON|OFF|<NR1>}
- DISplay:WAVEView1:ZOOM:ZOOM1:STATe?
Info
  • ON turns the specified zoom on.
  • OFF turns specified zoom off.
  • <NR1> = 0 disables the specified zoom; any other value enables the specified zoom.

DisplayWaveview1ZoomZoom1Vertical

Bases: SCPICmdRead

The DISplay:WAVEView1:ZOOM:ZOOM1:VERTical command tree.

Usage
  • Using the .query() method will send the DISplay:WAVEView1:ZOOM:ZOOM1:VERTical? query.
  • Using the .verify(value) method will send the DISplay:WAVEView1:ZOOM:ZOOM1:VERTical? query and raise an AssertionError if the returned value does not match value.
Properties
  • .position: The DISplay:WAVEView1:ZOOM:ZOOM1:VERTical:POSition command.
  • .scale: The DISplay:WAVEView1:ZOOM:ZOOM1:VERTical:SCALe command.

position property 

position: DisplayWaveview1ZoomZoom1VerticalPosition

Return the DISplay:WAVEView1:ZOOM:ZOOM1:VERTical:POSition command.

Description
  • This command sets or queries the vertical position of the specified zoom in the specified Waveform View. It is freely movable within the confines of the acquired waveform. It is measured from the top to bottom of the acquisition window. The top of the zoom window is -5 * vertical zoom factor. The bottom of the zoom window is +5 * the vertical zoom factor. For a zoom of 5x, the position ranges from -25 to 25.
Usage
  • Using the .query() method will send the DISplay:WAVEView1:ZOOM:ZOOM1:VERTical:POSition? query.
  • Using the .verify(value) method will send the DISplay:WAVEView1:ZOOM:ZOOM1:VERTical:POSition? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:WAVEView1:ZOOM:ZOOM1:VERTical:POSition value command.
SCPI Syntax 
- DISplay:WAVEView1:ZOOM:ZOOM1:VERTical:POSition <NR3>
- DISplay:WAVEView1:ZOOM:ZOOM1:VERTical:POSition?
Info
  • NR3 is the vertical position of the specified zoom in the specified Waveform View. It is freely movable within the confines of the acquired waveform. The top of the zoom window is -5 \ vertical zoom factor. The bottom of the zoom window is +5 \ the vertical zoom factor. For a vertical zoom of 5x, the position ranges from -25 to 25.

scale property 

scale: DisplayWaveview1ZoomZoom1VerticalScale

Return the DISplay:WAVEView1:ZOOM:ZOOM1:VERTical:SCALe command.

Description
  • This command sets or queries the vertical zoom factor of the specified zoom in the specified Waveform View.
Usage
  • Using the .query() method will send the DISplay:WAVEView1:ZOOM:ZOOM1:VERTical:SCALe? query.
  • Using the .verify(value) method will send the DISplay:WAVEView1:ZOOM:ZOOM1:VERTical:SCALe? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:WAVEView1:ZOOM:ZOOM1:VERTical:SCALe value command.
SCPI Syntax 
- DISplay:WAVEView1:ZOOM:ZOOM1:VERTical:SCALe <NR3>
- DISplay:WAVEView1:ZOOM:ZOOM1:VERTical:SCALe?
Info
  • <NR3> is the amount of vertical expansion or compression. Based on the value that you entered, this command uses the nearest scale factor. Setting the vertical scale to 1 indicates unity (no zoom).

DisplayWaveview1ZoomZoom1VerticalPosition

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:WAVEView1:ZOOM:ZOOM1:VERTical:POSition command.

Description
  • This command sets or queries the vertical position of the specified zoom in the specified Waveform View. It is freely movable within the confines of the acquired waveform. It is measured from the top to bottom of the acquisition window. The top of the zoom window is -5 * vertical zoom factor. The bottom of the zoom window is +5 * the vertical zoom factor. For a zoom of 5x, the position ranges from -25 to 25.
Usage
  • Using the .query() method will send the DISplay:WAVEView1:ZOOM:ZOOM1:VERTical:POSition? query.
  • Using the .verify(value) method will send the DISplay:WAVEView1:ZOOM:ZOOM1:VERTical:POSition? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:WAVEView1:ZOOM:ZOOM1:VERTical:POSition value command.
SCPI Syntax 
- DISplay:WAVEView1:ZOOM:ZOOM1:VERTical:POSition <NR3>
- DISplay:WAVEView1:ZOOM:ZOOM1:VERTical:POSition?
Info
  • NR3 is the vertical position of the specified zoom in the specified Waveform View. It is freely movable within the confines of the acquired waveform. The top of the zoom window is -5 \ vertical zoom factor. The bottom of the zoom window is +5 \ the vertical zoom factor. For a vertical zoom of 5x, the position ranges from -25 to 25.

DisplayWaveview1ZoomZoom1VerticalScale

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:WAVEView1:ZOOM:ZOOM1:VERTical:SCALe command.

Description
  • This command sets or queries the vertical zoom factor of the specified zoom in the specified Waveform View.
Usage
  • Using the .query() method will send the DISplay:WAVEView1:ZOOM:ZOOM1:VERTical:SCALe? query.
  • Using the .verify(value) method will send the DISplay:WAVEView1:ZOOM:ZOOM1:VERTical:SCALe? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:WAVEView1:ZOOM:ZOOM1:VERTical:SCALe value command.
SCPI Syntax 
- DISplay:WAVEView1:ZOOM:ZOOM1:VERTical:SCALe <NR3>
- DISplay:WAVEView1:ZOOM:ZOOM1:VERTical:SCALe?
Info
  • <NR3> is the amount of vertical expansion or compression. Based on the value that you entered, this command uses the nearest scale factor. Setting the vertical scale to 1 indicates unity (no zoom).

DisplayWaveviewCursor

Bases: SCPICmdRead

The DISplay:WAVEView:CURSor command tree.

Usage
  • Using the .query() method will send the DISplay:WAVEView:CURSor? query.
  • Using the .verify(value) method will send the DISplay:WAVEView:CURSor? query and raise an AssertionError if the returned value does not match value.
Properties
  • .cursor1: The DISplay:WAVEView:CURSor:CURSOR1 command tree.

cursor1 property 

cursor1: DisplayWaveviewCursorCursor1

Return the DISplay:WAVEView:CURSor:CURSOR1 command tree.

Usage
  • Using the .query() method will send the DISplay:WAVEView:CURSor:CURSOR1? query.
  • Using the .verify(value) method will send the DISplay:WAVEView:CURSor:CURSOR1? query and raise an AssertionError if the returned value does not match value.
Sub-properties
  • .rolocation: The DISplay:WAVEView:CURSor:CURSOR1:ROLOCATION command.

DisplayWaveviewCursorCursor1

Bases: SCPICmdRead

The DISplay:WAVEView:CURSor:CURSOR1 command tree.

Usage
  • Using the .query() method will send the DISplay:WAVEView:CURSor:CURSOR1? query.
  • Using the .verify(value) method will send the DISplay:WAVEView:CURSor:CURSOR1? query and raise an AssertionError if the returned value does not match value.
Properties
  • .rolocation: The DISplay:WAVEView:CURSor:CURSOR1:ROLOCATION command.

rolocation property 

rolocation: DisplayWaveviewCursorCursor1Rolocation

Return the DISplay:WAVEView:CURSor:CURSOR1:ROLOCATION command.

Description
  • This command sets or queries the location to display the Waveform View cursor readouts (in the Waveform View graticule or in a badge in the Results Bar).
Usage
  • Using the .query() method will send the DISplay:WAVEView:CURSor:CURSOR1:ROLOCATION? query.
  • Using the .verify(value) method will send the DISplay:WAVEView:CURSor:CURSOR1:ROLOCATION? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:WAVEView:CURSor:CURSOR1:ROLOCATION value command.
SCPI Syntax 
- DISplay:WAVEView:CURSor:CURSOR1:ROLOCATION {GRATICULE|BADGE}
- DISplay:WAVEView:CURSor:CURSOR1:ROLOCATION?
Info
  • GRATICULE sets the Waveform View cursor readouts to display as part of the cursors in the plot view.
  • BADGE removes the Waveform View cursor readouts from the cursors in the graticule and displays the cursor information as a badge in the Results Bar.

DisplayWaveviewCursorCursor1Rolocation

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:WAVEView:CURSor:CURSOR1:ROLOCATION command.

Description
  • This command sets or queries the location to display the Waveform View cursor readouts (in the Waveform View graticule or in a badge in the Results Bar).
Usage
  • Using the .query() method will send the DISplay:WAVEView:CURSor:CURSOR1:ROLOCATION? query.
  • Using the .verify(value) method will send the DISplay:WAVEView:CURSor:CURSOR1:ROLOCATION? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:WAVEView:CURSor:CURSOR1:ROLOCATION value command.
SCPI Syntax 
- DISplay:WAVEView:CURSor:CURSOR1:ROLOCATION {GRATICULE|BADGE}
- DISplay:WAVEView:CURSor:CURSOR1:ROLOCATION?
Info
  • GRATICULE sets the Waveform View cursor readouts to display as part of the cursors in the plot view.
  • BADGE removes the Waveform View cursor readouts from the cursors in the graticule and displays the cursor information as a badge in the Results Bar.

DisplayWaveviewGridtype

Bases: SCPICmdWrite, SCPICmdRead

The DISplay:WAVEView:GRIDTYPE command.

Description
  • This command sets or queries the Waveform View Graticule type.
Usage
  • Using the .query() method will send the DISplay:WAVEView:GRIDTYPE? query.
  • Using the .verify(value) method will send the DISplay:WAVEView:GRIDTYPE? query and raise an AssertionError if the returned value does not match value.
  • Using the .write(value) method will send the DISplay:WAVEView:GRIDTYPE value command.
SCPI Syntax 
- DISplay:WAVEView:GRIDTYPE {MOVEABLE|FIXED}
- DISplay:WAVEView:GRIDTYPE?
Info
  • MOVEABLE sets the Waveform View so that both the waveform and the grid (graticule) move together when moving the waveform horizontally.
  • FIXED sets the Waveform View so that the grid dows not move when moving the waveform horizontally.